Index: head/stand/efi/boot1/boot1.c =================================================================== --- head/stand/efi/boot1/boot1.c (revision 332750) +++ head/stand/efi/boot1/boot1.c (revision 332751) @@ -1,579 +1,581 @@ /*- * Copyright (c) 1998 Robert Nordier * All rights reserved. * Copyright (c) 2001 Robert Drehmel * All rights reserved. * Copyright (c) 2014 Nathan Whitehorn * All rights reserved. * Copyright (c) 2015 Eric McCorkle * All rights reserved. * * Redistribution and use in source and binary forms are freely * permitted provided that the above copyright notice and this * paragraph and the following disclaimer are duplicated in all * such forms. * * This software is provided "AS IS" and without any express or * implied warranties, including, without limitation, the implied * warranties of merchantability and fitness for a particular * purpose. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include "boot_module.h" #include "paths.h" static void efi_panic(EFI_STATUS s, const char *fmt, ...) __dead2 __printflike(2, 3); static const boot_module_t *boot_modules[] = { #ifdef EFI_ZFS_BOOT &zfs_module, #endif #ifdef EFI_UFS_BOOT &ufs_module #endif }; #define NUM_BOOT_MODULES nitems(boot_modules) /* The initial number of handles used to query EFI for partitions. */ #define NUM_HANDLES_INIT 24 static EFI_GUID BlockIoProtocolGUID = BLOCK_IO_PROTOCOL; static EFI_GUID DevicePathGUID = DEVICE_PATH_PROTOCOL; static EFI_GUID LoadedImageGUID = LOADED_IMAGE_PROTOCOL; static EFI_GUID ConsoleControlGUID = EFI_CONSOLE_CONTROL_PROTOCOL_GUID; /* * Provide Malloc / Free backed by EFIs AllocatePool / FreePool which ensures * memory is correctly aligned avoiding EFI_INVALID_PARAMETER returns from * EFI methods. */ void * Malloc(size_t len, const char *file __unused, int line __unused) { void *out; if (BS->AllocatePool(EfiLoaderData, len, &out) == EFI_SUCCESS) return (out); return (NULL); } void Free(void *buf, const char *file __unused, int line __unused) { if (buf != NULL) (void)BS->FreePool(buf); } /* * nodes_match returns TRUE if the imgpath isn't NULL and the nodes match, * FALSE otherwise. */ static BOOLEAN nodes_match(EFI_DEVICE_PATH *imgpath, EFI_DEVICE_PATH *devpath) { size_t len; if (imgpath == NULL || imgpath->Type != devpath->Type || imgpath->SubType != devpath->SubType) return (FALSE); len = DevicePathNodeLength(imgpath); if (len != DevicePathNodeLength(devpath)) return (FALSE); return (memcmp(imgpath, devpath, (size_t)len) == 0); } /* * device_paths_match returns TRUE if the imgpath isn't NULL and all nodes * in imgpath and devpath match up to their respective occurrences of a * media node, FALSE otherwise. */ static BOOLEAN device_paths_match(EFI_DEVICE_PATH *imgpath, EFI_DEVICE_PATH *devpath) { if (imgpath == NULL) return (FALSE); while (!IsDevicePathEnd(imgpath) && !IsDevicePathEnd(devpath)) { if (IsDevicePathType(imgpath, MEDIA_DEVICE_PATH) && IsDevicePathType(devpath, MEDIA_DEVICE_PATH)) return (TRUE); if (!nodes_match(imgpath, devpath)) return (FALSE); imgpath = NextDevicePathNode(imgpath); devpath = NextDevicePathNode(devpath); } return (FALSE); } /* * devpath_last returns the last non-path end node in devpath. */ static EFI_DEVICE_PATH * devpath_last(EFI_DEVICE_PATH *devpath) { while (!IsDevicePathEnd(NextDevicePathNode(devpath))) devpath = NextDevicePathNode(devpath); return (devpath); } /* * load_loader attempts to load the loader image data. * * It tries each module and its respective devices, identified by mod->probe, * in order until a successful load occurs at which point it returns EFI_SUCCESS * and EFI_NOT_FOUND otherwise. * * Only devices which have preferred matching the preferred parameter are tried. */ static EFI_STATUS load_loader(const boot_module_t **modp, dev_info_t **devinfop, void **bufp, size_t *bufsize, BOOLEAN preferred) { UINTN i; dev_info_t *dev; const boot_module_t *mod; for (i = 0; i < NUM_BOOT_MODULES; i++) { mod = boot_modules[i]; for (dev = mod->devices(); dev != NULL; dev = dev->next) { if (dev->preferred != preferred) continue; if (mod->load(PATH_LOADER_EFI, dev, bufp, bufsize) == EFI_SUCCESS) { *devinfop = dev; *modp = mod; return (EFI_SUCCESS); } } } return (EFI_NOT_FOUND); } /* * try_boot only returns if it fails to load the loader. If it succeeds * it simply boots, otherwise it returns the status of last EFI call. */ static EFI_STATUS try_boot(void) { size_t bufsize, loadersize, cmdsize; void *buf, *loaderbuf; char *cmd; dev_info_t *dev; const boot_module_t *mod; EFI_HANDLE loaderhandle; EFI_LOADED_IMAGE *loaded_image; EFI_STATUS status; status = load_loader(&mod, &dev, &loaderbuf, &loadersize, TRUE); if (status != EFI_SUCCESS) { status = load_loader(&mod, &dev, &loaderbuf, &loadersize, FALSE); if (status != EFI_SUCCESS) { printf("Failed to load '%s'\n", PATH_LOADER_EFI); return (status); } } /* * Read in and parse the command line from /boot.config or /boot/config, * if present. We'll pass it the next stage via a simple ASCII * string. loader.efi has a hack for ASCII strings, so we'll use that to * keep the size down here. We only try to read the alternate file if * we get EFI_NOT_FOUND because all other errors mean that the boot_module * had troubles with the filesystem. We could return early, but we'll let * loading the actual kernel sort all that out. Since these files are * optional, we don't report errors in trying to read them. */ cmd = NULL; cmdsize = 0; status = mod->load(PATH_DOTCONFIG, dev, &buf, &bufsize); if (status == EFI_NOT_FOUND) status = mod->load(PATH_CONFIG, dev, &buf, &bufsize); if (status == EFI_SUCCESS) { cmdsize = bufsize + 1; cmd = malloc(cmdsize); if (cmd == NULL) goto errout; memcpy(cmd, buf, bufsize); cmd[bufsize] = '\0'; free(buf); buf = NULL; } if ((status = BS->LoadImage(TRUE, IH, devpath_last(dev->devpath), loaderbuf, loadersize, &loaderhandle)) != EFI_SUCCESS) { printf("Failed to load image provided by %s, size: %zu, (%lu)\n", mod->name, loadersize, EFI_ERROR_CODE(status)); goto errout; } if ((status = BS->HandleProtocol(loaderhandle, &LoadedImageGUID, (VOID**)&loaded_image)) != EFI_SUCCESS) { printf("Failed to query LoadedImage provided by %s (%lu)\n", mod->name, EFI_ERROR_CODE(status)); goto errout; } if (cmd != NULL) printf(" command args: %s\n", cmd); loaded_image->DeviceHandle = dev->devhandle; loaded_image->LoadOptionsSize = cmdsize; loaded_image->LoadOptions = cmd; DPRINTF("Starting '%s' in 5 seconds...", PATH_LOADER_EFI); DSTALL(1000000); DPRINTF("."); DSTALL(1000000); DPRINTF("."); DSTALL(1000000); DPRINTF("."); DSTALL(1000000); DPRINTF("."); DSTALL(1000000); DPRINTF(".\n"); if ((status = BS->StartImage(loaderhandle, NULL, NULL)) != EFI_SUCCESS) { printf("Failed to start image provided by %s (%lu)\n", mod->name, EFI_ERROR_CODE(status)); loaded_image->LoadOptionsSize = 0; loaded_image->LoadOptions = NULL; } errout: if (cmd != NULL) free(cmd); if (buf != NULL) free(buf); if (loaderbuf != NULL) free(loaderbuf); return (status); } /* * probe_handle determines if the passed handle represents a logical partition * if it does it uses each module in order to probe it and if successful it * returns EFI_SUCCESS. */ static EFI_STATUS probe_handle(EFI_HANDLE h, EFI_DEVICE_PATH *imgpath, BOOLEAN *preferred) { dev_info_t *devinfo; EFI_BLOCK_IO *blkio; EFI_DEVICE_PATH *devpath; EFI_STATUS status; UINTN i; /* Figure out if we're dealing with an actual partition. */ status = BS->HandleProtocol(h, &DevicePathGUID, (void **)&devpath); if (status == EFI_UNSUPPORTED) return (status); if (status != EFI_SUCCESS) { DPRINTF("\nFailed to query DevicePath (%lu)\n", EFI_ERROR_CODE(status)); return (status); } #ifdef EFI_DEBUG { CHAR16 *text = efi_devpath_name(devpath); DPRINTF("probing: %S\n", text); efi_free_devpath_name(text); } #endif status = BS->HandleProtocol(h, &BlockIoProtocolGUID, (void **)&blkio); if (status == EFI_UNSUPPORTED) return (status); if (status != EFI_SUCCESS) { DPRINTF("\nFailed to query BlockIoProtocol (%lu)\n", EFI_ERROR_CODE(status)); return (status); } if (!blkio->Media->LogicalPartition) return (EFI_UNSUPPORTED); *preferred = device_paths_match(imgpath, devpath); /* Run through each module, see if it can load this partition */ for (i = 0; i < NUM_BOOT_MODULES; i++) { devinfo = malloc(sizeof(*devinfo)); if (devinfo == NULL) { DPRINTF("\nFailed to allocate devinfo\n"); continue; } devinfo->dev = blkio; devinfo->devpath = devpath; devinfo->devhandle = h; devinfo->devdata = NULL; devinfo->preferred = *preferred; devinfo->next = NULL; status = boot_modules[i]->probe(devinfo); if (status == EFI_SUCCESS) return (EFI_SUCCESS); free(devinfo); } return (EFI_UNSUPPORTED); } /* * probe_handle_status calls probe_handle and outputs the returned status * of the call. */ static void probe_handle_status(EFI_HANDLE h, EFI_DEVICE_PATH *imgpath) { EFI_STATUS status; BOOLEAN preferred; preferred = FALSE; status = probe_handle(h, imgpath, &preferred); DPRINTF("probe: "); switch (status) { case EFI_UNSUPPORTED: printf("."); DPRINTF(" not supported\n"); break; case EFI_SUCCESS: if (preferred) { printf("%c", '*'); DPRINTF(" supported (preferred)\n"); } else { printf("%c", '+'); DPRINTF(" supported\n"); } break; default: printf("x"); DPRINTF(" error (%lu)\n", EFI_ERROR_CODE(status)); break; } DSTALL(500000); } EFI_STATUS efi_main(EFI_HANDLE Ximage, EFI_SYSTEM_TABLE *Xsystab) { EFI_HANDLE *handles; EFI_LOADED_IMAGE *img; EFI_DEVICE_PATH *imgpath; EFI_STATUS status; EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl = NULL; SIMPLE_TEXT_OUTPUT_INTERFACE *conout = NULL; UINTN i, hsize, nhandles; CHAR16 *text; UINT16 boot_current; size_t sz; UINT16 boot_order[100]; /* Basic initialization*/ ST = Xsystab; IH = Ximage; BS = ST->BootServices; RS = ST->RuntimeServices; /* Set up the console, so printf works. */ status = BS->LocateProtocol(&ConsoleControlGUID, NULL, (VOID **)&ConsoleControl); if (status == EFI_SUCCESS) (void)ConsoleControl->SetMode(ConsoleControl, EfiConsoleControlScreenText); /* * Reset the console enable the cursor. Later we'll choose a better * console size through GOP/UGA. */ conout = ST->ConOut; conout->Reset(conout, TRUE); + /* Explicitly set conout to mode 0, 80x25 */ + conout->SetMode(conout, 0); conout->EnableCursor(conout, TRUE); conout->ClearScreen(conout); printf("\n>> FreeBSD EFI boot block\n"); printf(" Loader path: %s\n\n", PATH_LOADER_EFI); printf(" Initializing modules:"); for (i = 0; i < NUM_BOOT_MODULES; i++) { printf(" %s", boot_modules[i]->name); if (boot_modules[i]->init != NULL) boot_modules[i]->init(); } putchar('\n'); /* Determine the devpath of our image so we can prefer it. */ status = BS->HandleProtocol(IH, &LoadedImageGUID, (VOID**)&img); imgpath = NULL; if (status == EFI_SUCCESS) { text = efi_devpath_name(img->FilePath); if (text != NULL) { printf(" Load Path: %S\n", text); efi_setenv_freebsd_wcs("Boot1Path", text); efi_free_devpath_name(text); } status = BS->HandleProtocol(img->DeviceHandle, &DevicePathGUID, (void **)&imgpath); if (status != EFI_SUCCESS) { DPRINTF("Failed to get image DevicePath (%lu)\n", EFI_ERROR_CODE(status)); } else { text = efi_devpath_name(imgpath); if (text != NULL) { printf(" Load Device: %S\n", text); efi_setenv_freebsd_wcs("Boot1Dev", text); efi_free_devpath_name(text); } } } boot_current = 0; sz = sizeof(boot_current); if (efi_global_getenv("BootCurrent", &boot_current, &sz) == EFI_SUCCESS) { printf(" BootCurrent: %04x\n", boot_current); sz = sizeof(boot_order); if (efi_global_getenv("BootOrder", &boot_order, &sz) == EFI_SUCCESS) { printf(" BootOrder:"); for (i = 0; i < sz / sizeof(boot_order[0]); i++) printf(" %04x%s", boot_order[i], boot_order[i] == boot_current ? "[*]" : ""); printf("\n"); } } #ifdef TEST_FAILURE /* * For testing failover scenarios, it's nice to be able to fail fast. * Define TEST_FAILURE to create a boot1.efi that always fails after * reporting the boot manager protocol details. */ BS->Exit(IH, EFI_OUT_OF_RESOURCES, 0, NULL); #endif /* Get all the device handles */ hsize = (UINTN)NUM_HANDLES_INIT * sizeof(EFI_HANDLE); handles = malloc(hsize); if (handles == NULL) printf("Failed to allocate %d handles\n", NUM_HANDLES_INIT); status = BS->LocateHandle(ByProtocol, &BlockIoProtocolGUID, NULL, &hsize, handles); switch (status) { case EFI_SUCCESS: break; case EFI_BUFFER_TOO_SMALL: free(handles); handles = malloc(hsize); if (handles == NULL) efi_panic(EFI_OUT_OF_RESOURCES, "Failed to allocate %d handles\n", NUM_HANDLES_INIT); status = BS->LocateHandle(ByProtocol, &BlockIoProtocolGUID, NULL, &hsize, handles); if (status != EFI_SUCCESS) efi_panic(status, "Failed to get device handles\n"); break; default: efi_panic(status, "Failed to get device handles\n"); break; } /* Scan all partitions, probing with all modules. */ nhandles = hsize / sizeof(*handles); printf(" Probing %zu block devices...", nhandles); DPRINTF("\n"); for (i = 0; i < nhandles; i++) probe_handle_status(handles[i], imgpath); printf(" done\n"); /* Status summary. */ for (i = 0; i < NUM_BOOT_MODULES; i++) { printf(" "); boot_modules[i]->status(); } try_boot(); /* If we get here, we're out of luck... */ efi_panic(EFI_LOAD_ERROR, "No bootable partitions found!"); } /* * add_device adds a device to the passed devinfo list. */ void add_device(dev_info_t **devinfop, dev_info_t *devinfo) { dev_info_t *dev; if (*devinfop == NULL) { *devinfop = devinfo; return; } for (dev = *devinfop; dev->next != NULL; dev = dev->next) ; dev->next = devinfo; } /* * OK. We totally give up. Exit back to EFI with a sensible status so * it can try the next option on the list. */ static void efi_panic(EFI_STATUS s, const char *fmt, ...) { va_list ap; printf("panic: "); va_start(ap, fmt); vprintf(fmt, ap); va_end(ap); printf("\n"); BS->Exit(IH, s, 0, NULL); } void putchar(int c) { CHAR16 buf[2]; if (c == '\n') { buf[0] = '\r'; buf[1] = 0; ST->ConOut->OutputString(ST->ConOut, buf); } buf[0] = c; buf[1] = 0; ST->ConOut->OutputString(ST->ConOut, buf); } Index: head/stand/efi/loader/framebuffer.c =================================================================== --- head/stand/efi/loader/framebuffer.c (revision 332750) +++ head/stand/efi/loader/framebuffer.c (revision 332751) @@ -1,755 +1,757 @@ /*- * Copyright (c) 2013 The FreeBSD Foundation * All rights reserved. * * This software was developed by Benno Rice under sponsorship from * the FreeBSD Foundation. * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include "framebuffer.h" static EFI_GUID gop_guid = EFI_GRAPHICS_OUTPUT_PROTOCOL_GUID; static EFI_GUID pciio_guid = EFI_PCI_IO_PROTOCOL_GUID; static EFI_GUID uga_guid = EFI_UGA_DRAW_PROTOCOL_GUID; static struct named_resolution { const char *name; const char *alias; unsigned int width; unsigned int height; } resolutions[] = { { .name = "480p", .width = 640, .height = 480, }, { .name = "720p", .width = 1280, .height = 720, }, { .name = "1080p", .width = 1920, .height = 1080, }, { .name = "2160p", .alias = "4k", .width = 3840, .height = 2160, }, { .name = "5k", .width = 5120, .height = 2880, } }; static u_int efifb_color_depth(struct efi_fb *efifb) { uint32_t mask; u_int depth; mask = efifb->fb_mask_red | efifb->fb_mask_green | efifb->fb_mask_blue | efifb->fb_mask_reserved; if (mask == 0) return (0); for (depth = 1; mask != 1; depth++) mask >>= 1; return (depth); } static int efifb_mask_from_pixfmt(struct efi_fb *efifb, EFI_GRAPHICS_PIXEL_FORMAT pixfmt, EFI_PIXEL_BITMASK *pixinfo) { int result; result = 0; switch (pixfmt) { case PixelRedGreenBlueReserved8BitPerColor: efifb->fb_mask_red = 0x000000ff; efifb->fb_mask_green = 0x0000ff00; efifb->fb_mask_blue = 0x00ff0000; efifb->fb_mask_reserved = 0xff000000; break; case PixelBlueGreenRedReserved8BitPerColor: efifb->fb_mask_red = 0x00ff0000; efifb->fb_mask_green = 0x0000ff00; efifb->fb_mask_blue = 0x000000ff; efifb->fb_mask_reserved = 0xff000000; break; case PixelBitMask: efifb->fb_mask_red = pixinfo->RedMask; efifb->fb_mask_green = pixinfo->GreenMask; efifb->fb_mask_blue = pixinfo->BlueMask; efifb->fb_mask_reserved = pixinfo->ReservedMask; break; default: result = 1; break; } return (result); } static int efifb_from_gop(struct efi_fb *efifb, EFI_GRAPHICS_OUTPUT_PROTOCOL_MODE *mode, EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *info) { int result; efifb->fb_addr = mode->FrameBufferBase; efifb->fb_size = mode->FrameBufferSize; efifb->fb_height = info->VerticalResolution; efifb->fb_width = info->HorizontalResolution; efifb->fb_stride = info->PixelsPerScanLine; result = efifb_mask_from_pixfmt(efifb, info->PixelFormat, &info->PixelInformation); return (result); } static ssize_t efifb_uga_find_pixel(EFI_UGA_DRAW_PROTOCOL *uga, u_int line, EFI_PCI_IO_PROTOCOL *pciio, uint64_t addr, uint64_t size) { EFI_UGA_PIXEL pix0, pix1; uint8_t *data1, *data2; size_t count, maxcount = 1024; ssize_t ofs; EFI_STATUS status; u_int idx; status = uga->Blt(uga, &pix0, EfiUgaVideoToBltBuffer, 0, line, 0, 0, 1, 1, 0); if (EFI_ERROR(status)) { printf("UGA BLT operation failed (video->buffer)"); return (-1); } pix1.Red = ~pix0.Red; pix1.Green = ~pix0.Green; pix1.Blue = ~pix0.Blue; pix1.Reserved = 0; data1 = calloc(maxcount, 2); if (data1 == NULL) { printf("Unable to allocate memory"); return (-1); } data2 = data1 + maxcount; ofs = 0; while (size > 0) { count = min(size, maxcount); status = pciio->Mem.Read(pciio, EfiPciIoWidthUint32, EFI_PCI_IO_PASS_THROUGH_BAR, addr + ofs, count >> 2, data1); if (EFI_ERROR(status)) { printf("Error reading frame buffer (before)"); goto fail; } status = uga->Blt(uga, &pix1, EfiUgaBltBufferToVideo, 0, 0, 0, line, 1, 1, 0); if (EFI_ERROR(status)) { printf("UGA BLT operation failed (modify)"); goto fail; } status = pciio->Mem.Read(pciio, EfiPciIoWidthUint32, EFI_PCI_IO_PASS_THROUGH_BAR, addr + ofs, count >> 2, data2); if (EFI_ERROR(status)) { printf("Error reading frame buffer (after)"); goto fail; } status = uga->Blt(uga, &pix0, EfiUgaBltBufferToVideo, 0, 0, 0, line, 1, 1, 0); if (EFI_ERROR(status)) { printf("UGA BLT operation failed (restore)"); goto fail; } for (idx = 0; idx < count; idx++) { if (data1[idx] != data2[idx]) { free(data1); return (ofs + (idx & ~3)); } } ofs += count; size -= count; } printf("No change detected in frame buffer"); fail: printf(" -- error %lu\n", EFI_ERROR_CODE(status)); free(data1); return (-1); } static EFI_PCI_IO_PROTOCOL * efifb_uga_get_pciio(void) { EFI_PCI_IO_PROTOCOL *pciio; EFI_HANDLE *buf, *hp; EFI_STATUS status; UINTN bufsz; /* Get all handles that support the UGA protocol. */ bufsz = 0; status = BS->LocateHandle(ByProtocol, &uga_guid, NULL, &bufsz, NULL); if (status != EFI_BUFFER_TOO_SMALL) return (NULL); buf = malloc(bufsz); status = BS->LocateHandle(ByProtocol, &uga_guid, NULL, &bufsz, buf); if (status != EFI_SUCCESS) { free(buf); return (NULL); } bufsz /= sizeof(EFI_HANDLE); /* Get the PCI I/O interface of the first handle that supports it. */ pciio = NULL; for (hp = buf; hp < buf + bufsz; hp++) { status = BS->HandleProtocol(*hp, &pciio_guid, (void **)&pciio); if (status == EFI_SUCCESS) { free(buf); return (pciio); } } free(buf); return (NULL); } static EFI_STATUS efifb_uga_locate_framebuffer(EFI_PCI_IO_PROTOCOL *pciio, uint64_t *addrp, uint64_t *sizep) { uint8_t *resattr; uint64_t addr, size; EFI_STATUS status; u_int bar; if (pciio == NULL) return (EFI_DEVICE_ERROR); /* Attempt to get the frame buffer address (imprecise). */ *addrp = 0; *sizep = 0; for (bar = 0; bar < 6; bar++) { status = pciio->GetBarAttributes(pciio, bar, NULL, (void **)&resattr); if (status != EFI_SUCCESS) continue; /* XXX magic offsets and constants. */ if (resattr[0] == 0x87 && resattr[3] == 0) { /* 32-bit address space descriptor (MEMIO) */ addr = le32dec(resattr + 10); size = le32dec(resattr + 22); } else if (resattr[0] == 0x8a && resattr[3] == 0) { /* 64-bit address space descriptor (MEMIO) */ addr = le64dec(resattr + 14); size = le64dec(resattr + 38); } else { addr = 0; size = 0; } BS->FreePool(resattr); if (addr == 0 || size == 0) continue; /* We assume the largest BAR is the frame buffer. */ if (size > *sizep) { *addrp = addr; *sizep = size; } } return ((*addrp == 0 || *sizep == 0) ? EFI_DEVICE_ERROR : 0); } static int efifb_from_uga(struct efi_fb *efifb, EFI_UGA_DRAW_PROTOCOL *uga) { EFI_PCI_IO_PROTOCOL *pciio; char *ev, *p; EFI_STATUS status; ssize_t offset; uint64_t fbaddr; uint32_t horiz, vert, stride; uint32_t np, depth, refresh; status = uga->GetMode(uga, &horiz, &vert, &depth, &refresh); if (EFI_ERROR(status)) return (1); efifb->fb_height = vert; efifb->fb_width = horiz; /* Paranoia... */ if (efifb->fb_height == 0 || efifb->fb_width == 0) return (1); /* The color masks are fixed AFAICT. */ efifb_mask_from_pixfmt(efifb, PixelBlueGreenRedReserved8BitPerColor, NULL); /* pciio can be NULL on return! */ pciio = efifb_uga_get_pciio(); /* Try to find the frame buffer. */ status = efifb_uga_locate_framebuffer(pciio, &efifb->fb_addr, &efifb->fb_size); if (EFI_ERROR(status)) { efifb->fb_addr = 0; efifb->fb_size = 0; } /* * There's no reliable way to detect the frame buffer or the * offset within the frame buffer of the visible region, nor * the stride. Our only option is to look at the system and * fill in the blanks based on that. Luckily, UGA was mostly * only used on Apple hardware. */ offset = -1; ev = getenv("smbios.system.maker"); if (ev != NULL && !strcmp(ev, "Apple Inc.")) { ev = getenv("smbios.system.product"); if (ev != NULL && !strcmp(ev, "iMac7,1")) { /* These are the expected values we should have. */ horiz = 1680; vert = 1050; fbaddr = 0xc0000000; /* These are the missing bits. */ offset = 0x10000; stride = 1728; } else if (ev != NULL && !strcmp(ev, "MacBook3,1")) { /* These are the expected values we should have. */ horiz = 1280; vert = 800; fbaddr = 0xc0000000; /* These are the missing bits. */ offset = 0x0; stride = 2048; } } /* * If this is hardware we know, make sure that it looks familiar * before we accept our hardcoded values. */ if (offset >= 0 && efifb->fb_width == horiz && efifb->fb_height == vert && efifb->fb_addr == fbaddr) { efifb->fb_addr += offset; efifb->fb_size -= offset; efifb->fb_stride = stride; return (0); } else if (offset >= 0) { printf("Hardware make/model known, but graphics not " "as expected.\n"); printf("Console may not work!\n"); } /* * The stride is equal or larger to the width. Often it's the * next larger power of two. We'll start with that... */ efifb->fb_stride = efifb->fb_width; do { np = efifb->fb_stride & (efifb->fb_stride - 1); if (np) { efifb->fb_stride |= (np - 1); efifb->fb_stride++; } } while (np); ev = getenv("hw.efifb.address"); if (ev == NULL) { if (efifb->fb_addr == 0) { printf("Please set hw.efifb.address and " "hw.efifb.stride.\n"); return (1); } /* * The visible part of the frame buffer may not start at * offset 0, so try to detect it. Note that we may not * always be able to read from the frame buffer, which * means that we may not be able to detect anything. In * that case, we would take a long time scanning for a * pixel change in the frame buffer, which would have it * appear that we're hanging, so we limit the scan to * 1/256th of the frame buffer. This number is mostly * based on PR 202730 and the fact that on a MacBoook, * where we can't read from the frame buffer the offset * of the visible region is 0. In short: we want to scan * enough to handle all adapters that have an offset * larger than 0 and we want to scan as little as we can * to not appear to hang when we can't read from the * frame buffer. */ offset = efifb_uga_find_pixel(uga, 0, pciio, efifb->fb_addr, efifb->fb_size >> 8); if (offset == -1) { printf("Unable to reliably detect frame buffer.\n"); } else if (offset > 0) { efifb->fb_addr += offset; efifb->fb_size -= offset; } } else { offset = 0; efifb->fb_size = efifb->fb_height * efifb->fb_stride * 4; efifb->fb_addr = strtoul(ev, &p, 0); if (*p != '\0') return (1); } ev = getenv("hw.efifb.stride"); if (ev == NULL) { if (pciio != NULL && offset != -1) { /* Determine the stride. */ offset = efifb_uga_find_pixel(uga, 1, pciio, efifb->fb_addr, horiz * 8); if (offset != -1) efifb->fb_stride = offset >> 2; } else { printf("Unable to reliably detect the stride.\n"); } } else { efifb->fb_stride = strtoul(ev, &p, 0); if (*p != '\0') return (1); } /* * We finalized on the stride, so recalculate the size of the * frame buffer. */ efifb->fb_size = efifb->fb_height * efifb->fb_stride * 4; return (0); } int efi_find_framebuffer(struct efi_fb *efifb) { EFI_GRAPHICS_OUTPUT *gop; EFI_UGA_DRAW_PROTOCOL *uga; EFI_STATUS status; status = BS->LocateProtocol(&gop_guid, NULL, (VOID **)&gop); if (status == EFI_SUCCESS) return (efifb_from_gop(efifb, gop->Mode, gop->Mode->Info)); status = BS->LocateProtocol(&uga_guid, NULL, (VOID **)&uga); if (status == EFI_SUCCESS) return (efifb_from_uga(efifb, uga)); return (1); } static void print_efifb(int mode, struct efi_fb *efifb, int verbose) { u_int depth; if (mode >= 0) printf("mode %d: ", mode); depth = efifb_color_depth(efifb); printf("%ux%ux%u, stride=%u", efifb->fb_width, efifb->fb_height, depth, efifb->fb_stride); if (verbose) { printf("\n frame buffer: address=%jx, size=%jx", (uintmax_t)efifb->fb_addr, (uintmax_t)efifb->fb_size); printf("\n color mask: R=%08x, G=%08x, B=%08x\n", efifb->fb_mask_red, efifb->fb_mask_green, efifb->fb_mask_blue); } } static bool efi_resolution_compare(struct named_resolution *res, const char *cmp) { if (strcasecmp(res->name, cmp) == 0) return (true); if (res->alias != NULL && strcasecmp(res->alias, cmp) == 0) return (true); return (false); } static void efi_get_max_resolution(int *width, int *height) { struct named_resolution *res; char *maxres; char *height_start, *width_start; int idx; *width = *height = 0; maxres = getenv("efi_max_resolution"); /* No max_resolution set? Bail out; choose highest resolution */ if (maxres == NULL) return; /* See if it matches one of our known resolutions */ for (idx = 0; idx < nitems(resolutions); ++idx) { res = &resolutions[idx]; if (efi_resolution_compare(res, maxres)) { *width = res->width; *height = res->height; return; } } /* Not a known resolution, try to parse it; make a copy we can modify */ maxres = strdup(maxres); if (maxres == NULL) return; height_start = strchr(maxres, 'x'); if (height_start == NULL) { free(maxres); return; } width_start = maxres; *height_start++ = 0; /* Errors from this will effectively mean "no max" */ *width = (int)strtol(width_start, NULL, 0); *height = (int)strtol(height_start, NULL, 0); free(maxres); } static int gop_autoresize(EFI_GRAPHICS_OUTPUT *gop) { struct efi_fb efifb; EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *info; EFI_STATUS status; UINTN infosz; UINT32 best_mode, currdim, maxdim, mode; int height, max_height, max_width, width; best_mode = maxdim = 0; efi_get_max_resolution(&max_width, &max_height); for (mode = 0; mode < gop->Mode->MaxMode; mode++) { status = gop->QueryMode(gop, mode, &infosz, &info); if (EFI_ERROR(status)) continue; efifb_from_gop(&efifb, gop->Mode, info); width = info->HorizontalResolution; height = info->VerticalResolution; currdim = width * height; if (currdim > maxdim) { if ((max_width != 0 && width > max_width) || (max_height != 0 && height > max_height)) continue; maxdim = currdim; best_mode = mode; } } - status = gop->SetMode(gop, best_mode); - if (EFI_ERROR(status)) { - snprintf(command_errbuf, sizeof(command_errbuf), - "gop_autoresize: Unable to set mode to %u (error=%lu)", - mode, EFI_ERROR_CODE(status)); - return (CMD_ERROR); + if (maxdim != 0) { + status = gop->SetMode(gop, best_mode); + if (EFI_ERROR(status)) { + snprintf(command_errbuf, sizeof(command_errbuf), + "gop_autoresize: Unable to set mode to %u (error=%lu)", + mode, EFI_ERROR_CODE(status)); + return (CMD_ERROR); + } } return (CMD_OK); } static int text_autoresize() { SIMPLE_TEXT_OUTPUT_INTERFACE *conout; EFI_STATUS status; UINTN i, max_dim, best_mode, cols, rows; conout = ST->ConOut; max_dim = best_mode = 0; for (i = 0; i < conout->Mode->MaxMode; i++) { status = conout->QueryMode(conout, i, &cols, &rows); if (EFI_ERROR(status)) continue; if (cols * rows > max_dim) { max_dim = cols * rows; best_mode = i; } } if (max_dim > 0) conout->SetMode(conout, best_mode); return (CMD_OK); } static int uga_autoresize(EFI_UGA_DRAW_PROTOCOL *uga) { return (text_autoresize()); } COMMAND_SET(efi_autoresize, "efi-autoresizecons", "EFI Auto-resize Console", command_autoresize); static int command_autoresize(int argc, char *argv[]) { EFI_GRAPHICS_OUTPUT *gop; EFI_UGA_DRAW_PROTOCOL *uga; char *textmode; EFI_STATUS status; u_int mode; textmode = getenv("hw.vga.textmode"); /* If it's set and non-zero, we'll select a console mode instead */ if (textmode != NULL && strcmp(textmode, "0") != 0) return (text_autoresize()); gop = NULL; uga = NULL; status = BS->LocateProtocol(&gop_guid, NULL, (VOID **)&gop); if (EFI_ERROR(status) == 0) return (gop_autoresize(gop)); status = BS->LocateProtocol(&uga_guid, NULL, (VOID **)&uga); if (EFI_ERROR(status) == 0) return (uga_autoresize(uga)); snprintf(command_errbuf, sizeof(command_errbuf), "%s: Neither Graphics Output Protocol nor Universal Graphics Adapter present", argv[0]); return (CMD_ERROR); } COMMAND_SET(gop, "gop", "graphics output protocol", command_gop); static int command_gop(int argc, char *argv[]) { struct efi_fb efifb; EFI_GRAPHICS_OUTPUT *gop; EFI_STATUS status; u_int mode; status = BS->LocateProtocol(&gop_guid, NULL, (VOID **)&gop); if (EFI_ERROR(status)) { snprintf(command_errbuf, sizeof(command_errbuf), "%s: Graphics Output Protocol not present (error=%lu)", argv[0], EFI_ERROR_CODE(status)); return (CMD_ERROR); } if (argc < 2) goto usage; if (!strcmp(argv[1], "set")) { char *cp; if (argc != 3) goto usage; mode = strtol(argv[2], &cp, 0); if (cp[0] != '\0') { sprintf(command_errbuf, "mode is an integer"); return (CMD_ERROR); } status = gop->SetMode(gop, mode); if (EFI_ERROR(status)) { snprintf(command_errbuf, sizeof(command_errbuf), "%s: Unable to set mode to %u (error=%lu)", argv[0], mode, EFI_ERROR_CODE(status)); return (CMD_ERROR); } } else if (!strcmp(argv[1], "get")) { if (argc != 2) goto usage; efifb_from_gop(&efifb, gop->Mode, gop->Mode->Info); print_efifb(gop->Mode->Mode, &efifb, 1); printf("\n"); } else if (!strcmp(argv[1], "list")) { EFI_GRAPHICS_OUTPUT_MODE_INFORMATION *info; UINTN infosz; if (argc != 2) goto usage; pager_open(); for (mode = 0; mode < gop->Mode->MaxMode; mode++) { status = gop->QueryMode(gop, mode, &infosz, &info); if (EFI_ERROR(status)) continue; efifb_from_gop(&efifb, gop->Mode, info); print_efifb(mode, &efifb, 0); if (pager_output("\n")) break; } pager_close(); } return (CMD_OK); usage: snprintf(command_errbuf, sizeof(command_errbuf), "usage: %s [list | get | set ]", argv[0]); return (CMD_ERROR); } COMMAND_SET(uga, "uga", "universal graphics adapter", command_uga); static int command_uga(int argc, char *argv[]) { struct efi_fb efifb; EFI_UGA_DRAW_PROTOCOL *uga; EFI_STATUS status; status = BS->LocateProtocol(&uga_guid, NULL, (VOID **)&uga); if (EFI_ERROR(status)) { snprintf(command_errbuf, sizeof(command_errbuf), "%s: UGA Protocol not present (error=%lu)", argv[0], EFI_ERROR_CODE(status)); return (CMD_ERROR); } if (argc != 1) goto usage; if (efifb_from_uga(&efifb, uga) != CMD_OK) { snprintf(command_errbuf, sizeof(command_errbuf), "%s: Unable to get UGA information", argv[0]); return (CMD_ERROR); } print_efifb(-1, &efifb, 1); printf("\n"); return (CMD_OK); usage: snprintf(command_errbuf, sizeof(command_errbuf), "usage: %s", argv[0]); return (CMD_ERROR); }