Index: head/share/mk/bsd.own.mk
===================================================================
--- head/share/mk/bsd.own.mk	(revision 331498)
+++ head/share/mk/bsd.own.mk	(revision 331499)
@@ -1,247 +1,248 @@
 # $FreeBSD$
 #
 # The include file <bsd.own.mk> set common variables for owner,
 # group, mode, and directories. Defaults are in brackets.
 #
 #
 # +++ variables +++
 #
 # DESTDIR	Change the tree where the file gets installed. [not set]
 #
 # DISTDIR	Change the tree where the file for a distribution
 # 		gets installed (see /usr/src/release/Makefile). [not set]
 #
 # COMPRESS_CMD	Program to compress documents.
 #		Output is to stdout. [gzip -cn]
 #
 # COMPRESS_EXT	File name extension of ${COMPRESS_CMD} command. [.gz]
 #
 # BINOWN	Binary owner. [root]
 #
 # BINGRP	Binary group. [wheel]
 #
 # BINMODE	Binary mode. [555]
 #
 # NOBINMODE	Mode for non-executable files. [444]
 #
 # LIBDIR	Base path for libraries. [/usr/lib]
 #
 # LIBCOMPATDIR	Base path for compat libraries. [/usr/lib/compat]
 #
 # LIBDATADIR	Base path for misc. utility data files. [/usr/libdata]
 #
 # LIBEXECDIR	Base path for system daemons and utilities. [/usr/libexec]
 #
 # SHLIBDIR	Base path for shared libraries. [${LIBDIR}]
 #
 # LIBOWN	Library owner. [${BINOWN}]
 #
 # LIBGRP	Library group. [${BINGRP}]
 #
 # LIBMODE	Library mode. [${NOBINMODE}]
 #
 #
 # DEBUGDIR	Base path for standalone debug files. [/usr/lib/debug]
 #
 # DEBUGMODE	Mode for debug files. [${NOBINMODE}]
 #
 #
 # KMODDIR	Base path for loadable kernel modules
 #		(see kld(4)). [/boot/module]
 #
 # KMODOWN	Kernel and KLD owner. [${BINOWN}]
 #
 # KMODGRP	Kernel and KLD group. [${BINGRP}]
 #
 # KMODMODE	KLD mode. [${BINMODE}]
 #
 #
 # SHAREDIR	Base path for architecture-independent ascii
 #		text files. [/usr/share]
 #
 # SHAREOWN	ASCII text file owner. [root]
 #
 # SHAREGRP	ASCII text file group. [wheel]
 #
 # SHAREMODE	ASCII text file mode. [${NOBINMODE}]
 #
 #
 # CONFDIR	Base path for configuration files. [/etc]
 #
 # CONFOWN	Configuration file owner. [root]
 #
 # CONFGRP	Configuration file group. [wheel]
 #
 # CONFMODE	Configuration file mode. [644]
 #
 #
 # DOCDIR	Base path for system documentation (e.g. PSD, USD,
 #		handbook, FAQ etc.). [${SHAREDIR}/doc]
 #
 # DOCOWN	Documentation owner. [${SHAREOWN}]
 #
 # DOCGRP	Documentation group. [${SHAREGRP}]
 #
 # DOCMODE	Documentation mode. [${NOBINMODE}]
 #
 #
 # INFODIR	Base path for GNU's hypertext system
 #		called Info (see info(1)). [${SHAREDIR}/info]
 #
 # INFOOWN	Info owner. [${SHAREOWN}]
 #
 # INFOGRP	Info group. [${SHAREGRP}]
 #
 # INFOMODE	Info mode. [${NOBINMODE}]
 #
 #
 # MANDIR	Base path for manual installation. [${SHAREDIR}/man/man]
 #
 # MANOWN	Manual owner. [${SHAREOWN}]
 #
 # MANGRP	Manual group. [${SHAREGRP}]
 #
 # MANMODE	Manual mode. [${NOBINMODE}]
 #
 #
 # NLSDIR	Base path for National Language Support files
 #		installation. [${SHAREDIR}/nls]
 #
 # NLSOWN	National Language Support files owner. [${SHAREOWN}]
 #
 # NLSGRP	National Language Support files group. [${SHAREGRP}]
 #
 # NLSMODE	National Language Support files mode. [${NOBINMODE}]
 #
 # INCLUDEDIR	Base path for standard C include files [/usr/include]
 #
 # PKG_CMD	Program for creating and manipulating packages.
 #               [pkg] 
 
 .if !target(__<bsd.own.mk>__)
 __<bsd.own.mk>__:
 
 .include <bsd.opts.mk>		# options now here or src.opts.mk
 
 .if !defined(_WITHOUT_SRCCONF)
 
 .if ${MK_CTF} != "no"
 CTFCONVERT_CMD=	${CTFCONVERT} ${CTFFLAGS} ${.TARGET}
 .elif defined(.PARSEDIR) || (defined(MAKE_VERSION) && ${MAKE_VERSION} >= 5201111300)
 CTFCONVERT_CMD=
 .else
 CTFCONVERT_CMD=	@:
 .endif 
 
 .endif # !_WITHOUT_SRCCONF
 
 # Binaries
 BINOWN?=	root
 BINGRP?=	wheel
 BINMODE?=	555
 NOBINMODE?=	444
 
 KMODDIR?=	/boot/modules
 KMODOWN?=	${BINOWN}
 KMODGRP?=	${BINGRP}
 KMODMODE?=	${BINMODE}
 DTBDIR?=	/boot/dtb
+DTBODIR?=	/boot/dtb/overlays
 DTBOWN?=	root
 DTBGRP?=	wheel
 DTBMODE?=	444
 
 # Use make.conf / environment LIBDIR as default if set...
 .if !empty(_PREMK_LIBDIR)
 LIBDIR_BASE?=	${_PREMK_LIBDIR}
 .endif
 # otherwise use our expected default value.
 LIBDIR_BASE?=	/usr/lib
 LIBDIR?=	${LIBDIR_BASE}
 LIBCOMPATDIR?=	/usr/lib/compat
 LIBDATADIR?=	/usr/libdata
 LIBEXECDIR?=	/usr/libexec
 SHLIBDIR?=	${LIBDIR}
 LIBOWN?=	${BINOWN}
 LIBGRP?=	${BINGRP}
 LIBMODE?=	${NOBINMODE}
 
 DEBUGDIR?=	/usr/lib/debug
 DEBUGMODE?=	${NOBINMODE}
 
 
 # Share files
 SHAREDIR?=	/usr/share
 SHAREOWN?=	root
 SHAREGRP?=	wheel
 SHAREMODE?=	${NOBINMODE}
 
 CONFDIR?=	/etc
 CONFOWN?=	root
 CONFGRP?=	wheel
 CONFMODE?=	644
 
 MANDIR?=	${SHAREDIR}/man/man
 MANOWN?=	${SHAREOWN}
 MANGRP?=	${SHAREGRP}
 MANMODE?=	${NOBINMODE}
 
 DOCDIR?=	${SHAREDIR}/doc
 DOCOWN?=	${SHAREOWN}
 DOCGRP?=	${SHAREGRP}
 DOCMODE?=	${NOBINMODE}
 
 INFODIR?=	${SHAREDIR}/info
 INFOOWN?=	${SHAREOWN}
 INFOGRP?=	${SHAREGRP}
 INFOMODE?=	${NOBINMODE}
 
 NLSDIR?=	${SHAREDIR}/nls
 NLSOWN?=	${SHAREOWN}
 NLSGRP?=	${SHAREGRP}
 NLSMODE?=	${NOBINMODE}
 
 INCLUDEDIR?=	/usr/include
 
 #
 # install(1) parameters.
 #
 HRDLINK?=	-l h
 SYMLINK?=	-l s
 RSYMLINK?=	-l rs
 
 INSTALL_LINK?=		${INSTALL} ${HRDLINK}
 INSTALL_SYMLINK?=	${INSTALL} ${SYMLINK}
 INSTALL_RSYMLINK?=	${INSTALL} ${RSYMLINK}
 
 # Common variables
 .if !defined(DEBUG_FLAGS)
 STRIP?=		-s
 .endif
 
 COMPRESS_CMD?=	gzip -cn
 COMPRESS_EXT?=	.gz
 
 # Set XZ_THREADS to 1 to disable multi-threading.
 XZ_THREADS?=	0
 
 .if !empty(XZ_THREADS)
 XZ_CMD?=	xz -T ${XZ_THREADS}
 .else
 XZ_CMD?=	xz
 .endif
 
 PKG_CMD?=	pkg
 
 # Pointer to the top directory into which tests are installed.  Should not be
 # overriden by Makefiles, but the user may choose to set this in src.conf(5).
 TESTSBASE?= /usr/tests
 
 DEPENDFILE?=	.depend
 
 # Compat for the moment -- old bsd.own.mk only included this when _WITHOUT_SRCCONF
 # wasn't defined. bsd.ports.mk and friends depend on this behavior. Remove in 12.
 .if !defined(_WITHOUT_SRCCONF)
 .include <bsd.compiler.mk>
 .endif # !_WITHOUT_SRCCONF
 
 .endif	# !target(__<bsd.own.mk>__)
Index: head/sys/arm/conf/GENERIC
===================================================================
--- head/sys/arm/conf/GENERIC	(revision 331498)
+++ head/sys/arm/conf/GENERIC	(revision 331499)
@@ -1,249 +1,249 @@
 #
 # GENERICV6 -- Generic(ish) kernel config.
 #
 # For more information on this file, please read the config(5) manual page,
 # and/or the handbook section on Kernel Configuration Files:
 #
 #    https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
 #
 # The handbook is also available locally in /usr/share/doc/handbook
 # if you've installed the doc distribution, otherwise always see the
 # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
 # latest information.
 #
 # An exhaustive list of options and more detailed explanations of the
 # device lines is also present in the ../../conf/NOTES and NOTES files.
 # If you are in doubt as to the purpose or necessity of a line, check first
 # in NOTES.
 #
 # $FreeBSD$
 
 ident		GENERIC
 
 cpu		CPU_CORTEXA
 options 	SMP_ON_UP
 machine 	arm armv7
 makeoptions	CONF_CFLAGS="-march=armv7a"
 
 include 	"std.armv7"
 files		"../allwinner/files.allwinner"
 files		"../allwinner/files.allwinner_up"
 files		"../allwinner/a10/files.a10"
 files		"../allwinner/a13/files.a13"
 files		"../allwinner/a20/files.a20"
 files		"../allwinner/a31/files.a31"
 files		"../allwinner/a33/files.a33"
 files		"../allwinner/a83t/files.a83t"
 files		"../allwinner/h3/files.h3"
 files		"../broadcom/bcm2835/files.bcm2836"
 files		"../broadcom/bcm2835/files.bcm283x"
 files		"../freescale/imx/files.imx6"
 files		"../nvidia/tegra124/files.tegra124"
 files		"../qemu/files.qemu"
 files		"../ti/files.ti"
 files		"../ti/am335x/files.am335x"
 files		"../ti/omap4/files.omap4"
 files		"../xilinx/files.zynq7"
 
 options 	SOC_ALLWINNER_A10
 options 	SOC_ALLWINNER_A13
 options 	SOC_ALLWINNER_A20
 options 	SOC_ALLWINNER_A31
 options 	SOC_ALLWINNER_A31S
 options 	SOC_ALLWINNER_A33
 options 	SOC_ALLWINNER_A83T
 options 	SOC_ALLWINNER_H2PLUS
 options 	SOC_ALLWINNER_H3
 options 	SOC_BCM2836
 options		SOC_TI_AM335X
 options		SOC_OMAP4
 
 options 	SCHED_ULE		# ULE scheduler
 options 	SMP			# Enable multiple cores
 options 	PLATFORM
 options 	LINUX_BOOT_ABI
 
 # EXT_RESOURCES pseudo devices
 options 	EXT_RESOURCES
 device		clk
 device		phy
 device		hwreset
 device		regulator
 device		syscon
 
 # CPU frequency control
 device		cpufreq
 
 # Interrupt controller
 options 	INTRNG
 device		gic
 
 # PMU support (for CCNT).
 device		pmu
 
 # ARM Generic Timer
 device		generic_timer
 device		mpcore_timer
 
 # MMC/SD/SDIO Card slot support
 device		sdhci			# SD controller
 device		mmc			# mmc/sd bus
 device		mmcsd			# mmc/sd flash cards
 
 # ATA controllers
 device		ahci			# AHCI-compatible SATA controllers
 #device		ata			# Legacy ATA/SATA controllers
 
 # PCI
 options 	NEW_PCIB
 device		pci
 device		pci_host_generic
 
 # PCI NICs
 device		re			# RealTek 8139C+/8169/8169S/8110S
 
 # VirtIO
 device		virtio
 device		virtio_mmio
 device		virtio_pci
 device		virtio_blk
 device		vtnet
 
 # Console and misc
 device		uart
 device		uart_ns8250
 device		uart_snps
 device		pl011
 device		pty
 device		snp
 device		md			# Memory "disks"
 device		random			# Entropy device
 device		firmware		# firmware assist module
 device		pl310			# PL310 L2 cache controller
 device		psci
 
 # I2C support
 device		iicbus
 device		iic
 device		twsi
 device		rsb			# Allwinner Reduced Serial Bus
 device		p2wi			# Allwinner Push-Pull Two Wire
 device		axp209			# AXP209 Power Management Unit
 device		axp81x			# AXP813/818 Power Management Unit
 device		bcm2835_bsc
 device		fsliic			# Freescale i2c/iic
 device		icee			# AT24Cxxx and compatible EEPROMs
 device		sy8106a			# SY8106A Buck Regulator
 device		ti_i2c
 device		am335x_pmic		# AM335x Power Management IC (TPC65217)
 device		am335x_rtc		# RTC support (power management only)
 device		twl			# TI TWLX0X0/TPS659x0 Power Management
 device		twl_vreg		# twl voltage regulation
 device		twl_clks		# twl external clocks
 
 # i2c RTCs
 device		ds1307			# Dallas DS1307 RTC and compatible
 device		ds13rtc			# All Dallas/Maxim DS13xx RTCs
 device		ds1672			# Dallas DS1672 RTC
 device		ds3231			# Dallas DS3231 RTC + temperature
 device		nxprtc			# NXP RTCs: PCA/PFC212x PCA/PCF85xx
 device		s35390a			# Seiko s3539x RTCs
 
 # GPIO
 device		gpio
 device		gpiobacklight
 device		gpioled
 device		gpioregulator
 
 # EVDEV support
 device		evdev			# input event device support
 options		EVDEV_SUPPORT		# evdev support in legacy drivers
 device		uinput			# install /dev/uinput cdev
 device		aw_cir
 
 # SPI
 device		spibus
 device		spigen
 device		bcm2835_spi
 device		ti_spi
 
 # ADC support
 device		ti_adc
 
 # Watchdog support
 # If we don't enable the watchdog driver, the BealeBone could potentially
 # reboot automatically because the boot loader might have enabled the
 # watchdog.
 device		ti_wdt
 device		imxwdt			# Watchdog. WARNING: can't be disabled!!!
 
 device		scbus			# SCSI bus (required for ATA/SCSI)
 device		da			# Direct Access (disks)
 device		cd			# CD
 device		pass			# Passthrough device (direct ATA/SCSI access)
 
 # USB support
 options 	USB_HOST_ALIGN=64	# Align usb buffers to cache line size.
 device		usb
 #device		uhci
 device		ohci
 device		ehci
 device		dwcotg			# DWC OTG controller
 device		musb
 
 device		axe			# USB-Ethernet
 device		umass			# Disks/Mass storage - Requires scbus and da
 device		uhid			# "Human Interface Devices"
 device		ukbd			# Allow keyboard like HIDs to control console
 
 # Device mode support
 device		usb_template    	# Control of the gadget
 
 # Ethernet
 device		loop
 device		ether
 device		vlan			# 802.1Q VLAN support
 device		bpf
 
 # Ethernet NICs that use the common MII bus controller code.
 # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
 device		miibus
 
 device		awg			# 10/100/1000 integrated EMAC controller
 device		cpsw			# TI Common Platform Ethernet Switch (CPSW)
 device		cgem			# Zynq-7000 gig ethernet device
 device		dwc			# 10/100/1000 integrated GMAC controller
 device		emac			# 10/100 integrated EMAC controller
 device		ffec			# Freescale Fast Ethernet Controller
 device		smsc			# SMSC LAN91C111
 
 # Sound support
 device		sound
 
 # Framebuffer support
 device		vt
 device		kbdmux
 device		ums
 device		videomode
 device		hdmi
 device		vchiq
 
 # Pinmux
 device		fdt_pinctrl
 
 # TI Programmable Realtime Unit support
 device		ti_pruss
 
 # Mailbox support
 device		ti_mbox
 
 # DMA controller
 device		fslsdma
 device		ti_sdma
 
 # Extensible Firmware Interface
 options 	EFI
 
 # Flattened Device Tree
 options 	FDT			# Configure using FDT/DTB data
-makeoptions	MODULES_EXTRA="dtb/allwinner dtb/am335x dtb/imx6 dtb/nvidia dtb/rpi dtb/zynq dtb/omap4"
+makeoptions	MODULES_EXTRA="dtb/allwinner dtb/am335x dtb/imx6 dtb/nvidia dtb/rpi dtb/zynq dtb/omap4 dtb/overlays"
Index: head/sys/conf/dtb.mk
===================================================================
--- head/sys/conf/dtb.mk	(revision 331498)
+++ head/sys/conf/dtb.mk	(revision 331499)
@@ -1,84 +1,100 @@
 # $FreeBSD$
 #
 # The include file <dtb.mk> handles building and installing dtb files.
 #
 # +++ variables +++
 #
 # DTC		The Device Tree Compiler to use
 #
 # DTS		List of the dts files to build and install.
 #
 # DTBDIR	Base path for dtb modules [/boot/dtb]
 #
 # DTBOWN	.dtb file owner. [${BINOWN}]
 #
 # DTBGRP	.dtb file group. [${BINGRP}]
 #
 # DTBMODE	Module file mode. [${BINMODE}]
 #
 # DESTDIR	The tree where the module gets installed. [not set]
 #
 # +++ targets +++
 #
 # 	install:
 #               install the kernel module; if the Makefile
 #               does not itself define the target install, the targets
 #               beforeinstall and afterinstall may also be used to cause
 #               actions immediately before and after the install target
 #		is executed.
 #
 
 .include <bsd.init.mk>
 # Grab all the options for a kernel build. For backwards compat, we need to
 # do this after bsd.own.mk.
 .include "kern.opts.mk"
 
 DTC?=		dtc
 
 # Search for kernel source tree in standard places.
 .for _dir in ${.CURDIR}/../.. ${.CURDIR}/../../.. /sys /usr/src/sys
 .if !defined(SYSDIR) && exists(${_dir}/kern/)
 SYSDIR=	${_dir:tA}
 .endif
 .endfor
 .if !defined(SYSDIR) || !exists(${SYSDIR}/kern/)
 .error "can't find kernel source tree"
 .endif
 
-.SUFFIXES: .dtb .dts
+.SUFFIXES: .dtb .dts .dtbo .dtso
 
-.PATH: ${SYSDIR}/gnu/dts/${MACHINE} ${SYSDIR}/dts/${MACHINE}
+.PATH: ${SYSDIR}/gnu/dts/${MACHINE} ${SYSDIR}/dts/${MACHINE} ${SYSDIR}/dts/${MACHINE}/overlays
 
 DTB=${DTS:R:S/$/.dtb/}
+DTBO=${DTSO:R:S/$/.dtbo/}
 
-all: ${DTB}
+all: ${DTB} ${DTBO}
 
 .if defined(DTS)
 .export DTC
 .for _dts in ${DTS}
 ${_dts:R:S/$/.dtb/}:	${_dts} ${OP_META}
 	@echo Generating ${.TARGET} from ${_dts}
 	@${SYSDIR}/tools/fdt/make_dtb.sh ${SYSDIR} ${_dts} ${.OBJDIR}
 CLEANFILES+=${_dts:R:S/$/.dtb/}
 .endfor
 .endif
 
+.if defined(DTSO)
+.export DTC
+.for _dtso in ${DTSO}
+${_dtso:R:S/$/.dtbo/}:	${_dtso} ${OP_META}
+	@echo Generating ${.TARGET} from ${_dtso}
+	@${SYSDIR}/tools/fdt/make_dtbo.sh ${SYSDIR} overlays/${_dtso} ${.OBJDIR}
+CLEANFILES+=${_dtso:R:S/$/.dtbo/}
+.endfor
+.endif
+
 .if !target(install)
 .if !target(realinstall)
 realinstall: _dtbinstall
 .ORDER: beforeinstall _kmodinstall
 _dtbinstall:
 # Need to create this because installkernel doesn't invoke mtree with BSD.root.mtree
 # to make sure the tree is setup properly. We don't recreate it to avoid duplicate
 # entries in the NO_ROOT case.
 	test -d ${DESTDIR}${DTBDIR} || ${INSTALL} -d -o ${DTBOWN} -g ${DTBGRP} ${DESTDIR}${DTBDIR}
 .for _dtb in ${DTB}
 	${INSTALL} -o ${DTBOWN} -g ${DTBGRP} -m ${DTBMODE} \
 	    ${_INSTALLFLAGS} ${_dtb} ${DESTDIR}${DTBDIR}/
+.endfor
+	test -d ${DESTDIR}${DTBODIR} || ${INSTALL} -d -o ${DTBOWN} -g ${DTBGRP} ${DESTDIR}${DTBODIR}
+.for _dtbo in ${DTBO}
+	${INSTALL} -o ${DTBOWN} -g ${DTBGRP} -m ${DTBMODE} \
+	    ${_INSTALLFLAGS} ${_dtbo} ${DESTDIR}${DTBODIR}/
 .endfor
 .endif # !target(realinstall)
 .endif # !target(install)
 
 .include <bsd.dep.mk>
 .include <bsd.obj.mk>
 .include <bsd.links.mk>
Index: head/sys/dts/Makefile.inc
===================================================================
--- head/sys/dts/Makefile.inc	(revision 331498)
+++ head/sys/dts/Makefile.inc	(revision 331499)
@@ -1,10 +1,13 @@
 # $FreeBSD$
 
 SYSDIR?=${SRCTOP}/sys
 
 test-dts:
 .for dts in ${DTS}
 	@env MACHINE=`basename ${.CURDIR}` ${SYSDIR}/tools/fdt/make_dtb.sh ${SYSDIR} ${dts} /tmp
 
-.endfor
+test-dtso:
+.for dtso in ${DTSO}
+	@env MACHINE=`basename ${.CURDIR}` ${SYSDIR}/tools/fdt/make_dtbo.sh ${SYSDIR} ${dtso} /tmp
 
+.endfor
Index: head/sys/dts/arm/overlays/Makefile
===================================================================
--- head/sys/dts/arm/overlays/Makefile	(nonexistent)
+++ head/sys/dts/arm/overlays/Makefile	(revision 331499)
@@ -0,0 +1,7 @@
+# $FreeBSD$
+
+DTSO!=ls *.dtso
+
+all: test-dtso
+
+.include <bsd.init.mk>

Property changes on: head/sys/dts/arm/overlays/Makefile
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/sys/dts/arm/overlays/sun8i-h3-sid.dtso
===================================================================
--- head/sys/dts/arm/overlays/sun8i-h3-sid.dtso	(nonexistent)
+++ head/sys/dts/arm/overlays/sun8i-h3-sid.dtso	(revision 331499)
@@ -0,0 +1,18 @@
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "allwinner,sun8i-h3";
+
+	fragment@0 {
+		target-path = "/soc";
+
+		__overlay__ {
+			sid: eeprom@1c14000 {
+				compatible = "allwinner,sun8i-h3-sid";
+				reg = <0x1c14000 0x400>;
+				status = "okay";
+			};
+		};
+	};
+};

Property changes on: head/sys/dts/arm/overlays/sun8i-h3-sid.dtso
___________________________________________________________________
Added: fbsd:nokeywords
## -0,0 +1 ##
+yes
\ No newline at end of property
Index: head/sys/modules/dtb/overlays/Makefile
===================================================================
--- head/sys/modules/dtb/overlays/Makefile	(nonexistent)
+++ head/sys/modules/dtb/overlays/Makefile	(revision 331499)
@@ -0,0 +1,5 @@
+# $FreeBSD$
+# All the dtso files
+DTSO=	sun8i-h3-sid.dtso
+
+.include <bsd.dtb.mk>

Property changes on: head/sys/modules/dtb/overlays/Makefile
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/sys/tools/fdt/make_dtbo.sh
===================================================================
--- head/sys/tools/fdt/make_dtbo.sh	(nonexistent)
+++ head/sys/tools/fdt/make_dtbo.sh	(revision 331499)
@@ -0,0 +1,26 @@
+#!/bin/sh
+#
+# $FreeBSD$
+
+# Script generates dtbo file ($3) from dtso source ($2) in build tree S ($1)
+S=$1
+dtso="$2"
+dtbo_path=$3
+
+if [ -z "$dtso" ]; then
+    echo "No DTS overlays specified"
+    exit 1
+fi
+
+if [ -z "${MACHINE}" ]; then
+    MACHINE=$(uname -m)
+fi
+
+: ${DTC:=dtc}
+
+for d in ${dtso}; do
+    dtb=${dtbo_path}/`basename $d .dtso`.dtbo
+    echo "converting $d -> $dtb"
+    cpp -P -x assembler-with-cpp -I $S/gnu/dts/include -I $S/dts/${MACHINE} -I $S/gnu/dts/${MACHINE} -include $d /dev/null | 
+	${DTC} -@ -O dtb -o $dtb -i $S/dts/${MACHINE} -i $S/gnu/dts/${MACHINE}
+done

Property changes on: head/sys/tools/fdt/make_dtbo.sh
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property