Index: stable/2.2/etc/rc.conf
===================================================================
--- stable/2.2/etc/rc.conf	(revision 32949)
+++ stable/2.2/etc/rc.conf	(revision 32950)
@@ -1,142 +1,143 @@
 #!/bin/sh
 #
 
 # This is rc.conf - a file full of useful variables that you can set 
 # to change the default startup behavior of your system.
 #
 # All arguments must be in double or single quotes.
 #
-#	$Id: rc.conf,v 1.1.2.31 1998/01/29 10:50:22 obrien Exp $
+#	$Id: rc.conf,v 1.1.2.32 1998/01/29 11:01:29 obrien Exp $
 
 ##############################################################
 ### Important initial Boot-time options  #####################
 ##############################################################
 
 swapfile="NO"		# Set to name of swapfile if aux swapfile desired.
 apm_enable="NO"		# Set to YES if you want APM enabled.
 pccard_enable="NO"	# Set to YES if you want to configure PCCARD devices.
 pccard_mem="DEFAULT"	# If pccard_enable=YES, this is card memory address.
 pccard_ifconfig="NO"	# Specialized pccard ethernet configuration (or NO).
 local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d"	# startup script dirs.
 
 
 ##############################################################
 ###  Network configuration sub-section  ######################
 ##############################################################
 
 ### Basic network options: ###
 hostname="myname.my.domain"	# Set this!
 nisdomainname="NO"		# Set to NIS domain if using NIS (or NO).
 firewall_enable="NO"		# Set to YES to enable firewall functionality
 firewall_type="UNKNOWN"		# Firewall type (see /etc/rc.firewall)
 firewall_quiet="NO"		# Set to YES to suppress rule display
 tcp_extensions="YES"		# Allow RFC1323 & RFC1644 extensions (or NO).
 network_interfaces="lo0"	# List of network interfaces (lo0 is loopback).
 ifconfig_lo0="inet 127.0.0.1"	# default loopback device configuration.
 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
 
 ### Network daemon (miscellaneous) & NFS options: ###
 syslogd_enable="YES"		# Run syslog daemon (or NO).
 syslogd_flags=""		# Flags to syslogd (if enabled).
 inetd_enable="YES"		# Run the network daemon dispatcher (or NO).
 inetd_flags=""			# Optional flags to inetd.
 named_enable="NO"		# Run named, the DNS server (or NO).
+named_program="/usr/sbin/named"	# named program, in case we want bind8 instead.
 named_flags="-b /etc/namedb/named.boot" # Flags to named (if enabled).
 kerberos_server_enable="NO"	# Run a kerberos master server (or NO).
 rwhod_enable="NO"		# Run the rwho daemon (or NO).
 amd_enable="NO"			# Run amd service with $amd_flags (or NO).
 amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
 nfs_client_enable="NO"		# This host is an NFS client (or NO).
 nfs_client_flags="-n 4"		# Flags to nfsiod (if enabled).
 nfs_server_enable="NO"		# This host is an NFS server (or NO).
 nfs_server_flags="-u -t 4"	# Flags to nfsd (if enabled).
 mountd_flags="-r"		# Flags to mountd (if NFS server enabled).
 nfs_reserved_port_only="NO"	# Provide NFS only on secure port (or NO).
 rpc_lockd_enable="NO"		# Run NFS rpc.lockd (*broken!*) if nfs_server.
 rpc_statd_enable="YES"		# Run NFS rpc.statd if nfs_server (or NO).
 portmap_enable="YES"		# Run the portmapper service (or NO).
 portmap_flags=""		# Flags to portmap (if enabled).
 xtend_enable="NO"		# Run the X-10 power controller daemon.
 xtend_flags=""			# Flags to xtend (if enabled).
 
 ### Network Time Services options: ###
 timed_enable="NO"		# Run the time daemon (or NO).
 timed_flags=""			# Flags to timed (if enabled).
 ntpdate_enable="NO"		# Run the ntpdate to sync time (or NO).
 ntpdate_flags=""		# Flags to ntpdate (if enabled).
 xntpd_enable="NO"		# Run xntpd Network Time Protocol (or NO).
 xntpd_flags=""			# Flags to xntpd (if enabled).
 tickadj_enable="NO"		# Run tickadj (or NO).
 tickadj_flags="-Aq"		# Flags to tickadj (if enabled).
 
 # Network Information Services (NIS) options: ###
 nis_client_enable="NO"		# We're an NIS client (or NO).
 nis_client_flags=""		# Flags to ypbind (if enabled).
 nis_ypset_enable="NO"		# Run ypset at boot time (or NO).
 nis_ypset_flags=""		# Flags to ypset (if enabled).
 nis_server_enable="NO"		# We're an NIS server (or NO).
 nis_server_flags=""		# Flags to ypserv (if enabled).
 nis_ypxfrd_enable="NO"		# Run rpc.ypxfrd at boot time (or NO).
 nis_ypxfrd_flags=""		# Flags to rpc.ypxfrd (if enabled).
 nis_yppasswdd_enable="NO"	# Run rpc.yppasswdd at boot time (or NO).
 nis_yppasswdd_flags=""		# Flags to rpc.yppasswdd (if enabled).
 
 ### Network routing options: ###
 defaultrouter="NO"		# Set to default gateway (or NO).
 static_routes=""		# Set to static route list (or leave empty).
 gateway_enable="NO"		# Set to YES if this host will be a gateway.
 router_enable="YES"		# Set to YES to enable a routing daemon.
 router="routed"			# Name of routing daemon to use if enabled.
 router_flags="-q"		# Flags for routing daemon.
 mrouted_enable="NO"		# Do multicast routing (see /etc/mrouted.conf).
 mrouted_flags=""		# Flags for multicast routing daemon.
 ipxgateway_enable="NO"		# Set to YES to enable IPX routing.
 ipxrouted_enable="NO"		# Set to YES to run the IPX routing daemon.
 ipxrouted_flags=""		# Flags for IPX routing daemon.
 arpproxy_all=""			# obsolete kernel option ARP_PROXY_ALL equiv.
 
 
 ##############################################################
 ###  System console options  #################################
 ##############################################################
 
 keymap="NO"		# keymap in /usr/share/syscons/keymaps/* (or NO).
 keyrate="NO"		# keyboard rate to: slow, normal, fast (or NO).
 keybell="NO"		# bell to duration.pitch or normal or visual (or NO).
 keychange="NO"		# function keys default values (or NO).
 cursor="NO"		# cursor type {normal|blink|destructive} (or NO).
 scrnmap="NO"		# screen map in /usr/share/syscons/scrnmaps/* (or NO).
 font8x16="NO"		# font 8x16 from /usr/share/syscons/fonts/* (or NO).
 font8x14="NO"		# font 8x14 from /usr/share/syscons/fonts/* (or NO).
 font8x8="NO"		# font 8x8 from /usr/share/syscons/fonts/* (or NO).
 blanktime="NO"		# blank time (in seconds) or "NO" to turn it off.
 saver="NO"		# screen saver: blank/daemon/green/snake/star/NO.
 moused_type="NO"	# See man page for rc.conf(5) for available settings.
 moused_port="/dev/cuaa0" # Set to your mouse port (required if mousetype set).
 moused_flags=""		# Any additional flags to moused.
 
 
 ##############################################################
 ###  Miscellaneous administrative options  ###################
 ##############################################################
 
 cron_enable="YES"	# Run the periodic job daemon.
 lpd_enable="NO"		# Run the line printer daemon.
 lpd_flags=""		# Flags to lpd (if enabled).
 sendmail_enable="YES"	# Run the sendmail daemon (or NO).
 sendmail_flags="-bd -q30m" # -bd is pretty mandatory.
 dumpdev="NO"		# Device name to crashdump to (if enabled).
 check_quotas="NO"	# Check quotas (or NO).
 accounting_enable="NO"	# Turn on process accounting (or NO).
 ibcs2_enable="NO"	# Ibcs2 (SCO) emulation loaded at startup (or NO).
 linux_enable="NO"	# Linux emulation loaded at startup (or NO).
 rand_irqs="NO"		# Stir the entropy pool (eg: "5 11" or NO).
 clear_tmp_enable="NO"	# Clear /tmp at startup.
 ldconfig_paths=""	# Nonstandard shared library search paths
 
 ##############################################################
 ### Allow local configuration override at the very end here ##
 ##############################################################
 if [ -f /etc/rc.conf.local ]; then
 	. /etc/rc.conf.local
 fi
Index: stable/2.2/etc/rc.network
===================================================================
--- stable/2.2/etc/rc.network	(revision 32949)
+++ stable/2.2/etc/rc.network	(revision 32950)
@@ -1,234 +1,234 @@
 #!/bin/sh -
 #
-#	$Id: rc.network,v 1.1.2.11 1997/09/18 22:47:12 danny Exp $
+#	$Id: rc.network,v 1.1.2.12 1997/12/01 06:06:35 obrien Exp $
 #	From: @(#)netstart	5.9 (Berkeley) 3/30/91
 
 # Note that almost all the user-configurable behavior is no longer in
 # this file, but rather in /etc/rc.conf.  Please check that file
 # first before contemplating any changes here.  If you do need to change
 # this file for some reason, we would like to know about it.
 
 # First pass startup stuff.
 
 network_pass1() {
     echo -n 'Doing initial network setup:'
     # Set the host name if it is not already set
     if [ -z "`hostname -s`" ] ; then
 	    hostname $hostname
 	    echo -n ' hostname'
     fi
 
     # Set the domainname if we're using NIS
     if [ -n "$nisdomainname" -a "x$nisdomainname" != "xNO" ] ; then
 	    domainname $nisdomainname
 	    echo -n ' domain'
     fi
     echo '.'
 
     # Set up all the network interfaces, calling startup scripts if needed
     for ifn in ${network_interfaces}; do
 	    if [ -e /etc/start_if.${ifn} ]; then
 		    . /etc/start_if.${ifn} ${ifn}
 	    fi
 	    # Do the primary ifconfig if specified
 	    eval ifconfig_args=\$ifconfig_${ifn}
 	    if [ -n "${ifconfig_args}" ] ; then
 		    ifconfig ${ifn} ${ifconfig_args}
 	    fi
 	    # Check to see if aliases need to be added
 	    alias=0
 	    while :
 	    do
 		    eval ifconfig_args=\$ifconfig_${ifn}_alias${alias}
 		    if [ -n "${ifconfig_args}" ]; then
 			    ifconfig ${ifn} ${ifconfig_args} alias
 			    alias=`expr ${alias} + 1`
 		    else
 			    break;
 		    fi
 	    done
 	    # Do ipx address if specified
 	    eval ifconfig_args=\$ifconfig_${ifn}_ipx
 	    if [ -n "${ifconfig_args}" ]; then
 		    ifconfig ${ifn} ${ifconfig_args}
 	    fi
 	    ifconfig ${ifn}
     done
 
     # Initialize IP filtering using ipfw
     echo ""
     /sbin/ipfw -q flush > /dev/null 2>&1
     if [ $? = 1 ] ; then
 	firewall_in_kernel=0
     else 
 	firewall_in_kernel=1
     fi
 
     if [ $firewall_in_kernel = 0 -a "x$firewall_enable"  = "xYES" ] ; then
 	modload /lkm/ipfw_mod.o
 	if [ $? = 0 ]; then
 		firewall_in_kernel=1		# module loaded successfully
 		echo "Kernel firewall module loaded."
 	else
 		echo "Warning: firewall kernel module failed to load."
 	fi
     fi
 
     # Load the filters if required
     if [ $firewall_in_kernel = 1 ]; then
 	if [ -n "$firewall_enable" -a -f /etc/rc.firewall -a \
 		"x$firewall_enable" = "xYES" ] ; then
 	    . /etc/rc.firewall
 	    echo "Firewall rules loaded."
 	else
 	    echo "Warning: kernel has firewall functionality, but firewall rules are not enabled."
 	    echo "         All ip services are disabled."
 	fi
     fi
 
     # Configure routing
 
     if [ "x$defaultrouter" != "xNO" ] ; then
 	    static_routes="default ${static_routes}"
 	    route_default="default ${defaultrouter}"
     fi
     
     # Set up any static routes.  This should be done before router discovery.
     if [ "x${static_routes}" != "x" ]; then
 	    for i in ${static_routes}; do
 		    eval route_args=\$route_${i}
 		    route add ${route_args}
 	    done
     fi
 
     echo -n 'Additional routing options:'
     if [ -n "$tcp_extensions" -a "x$tcp_extensions" != "xYES" ] ; then
 	    echo -n ' tcp extensions=NO'
 	    sysctl -w net.inet.tcp.rfc1323=0 >/dev/null 2>&1
 	    sysctl -w net.inet.tcp.rfc1644=0 >/dev/null 2>&1
     fi
 
     if [ "X$gateway_enable" = X"YES" ]; then
 	    echo -n ' IP gateway=YES'
 	    sysctl -w net.inet.ip.forwarding=1 >/dev/null 2>&1
     fi
     
     if [ "X$router_enable" = X"YES" ]; then
 	    echo -n " ${router}";	${router} ${router_flags}
     fi
     
     if [ "X$ipxgateway_enable" = X"YES" ]; then
 	    echo -n ' IPX gateway=YES'
 	    sysctl -w net.ipx.ipx.ipxforwarding=1 >/dev/null 2>&1
     fi
     
     if [ "X$ipxrouted_enable" = X"YES" ]; then
 	    echo -n ' IPXrouted: '
 	    IPXrouted ${ipxrouted_flags} > /dev/null 2>&1
     fi
     
     if [ "X$arpproxy_all" = X"YES" ]; then
 	    echo -n ' enabling ARP_PROXY_ALL: '
 	    sysctl -w net.link.ether.inet.proxyall=1 2>&1
     fi
     echo '.'
     network_pass1_done=YES	# Let future generations know we made it.
 }
 
 network_pass2() {
     echo -n 'Doing additional network setup:'
     if [ "X${named_enable}" = X"YES" ]; then
-	    echo -n ' named';		named ${named_flags}
+	    echo -n ' named';		${named_program-"named"} ${named_flags}
     fi
 
     if [ "X${ntpdate_enable}" = X"YES" ]; then
 	    echo -n ' ntpdate';	ntpdate ${ntpdate_flags} >/dev/null 2>&1
     fi
 
     if [ "X${xntpd_enable}" = X"YES" ]; then
 	    echo -n ' xntpd';	xntpd ${xntpd_flags}
     fi
 
     if [ "X${timed_enable}" = X"YES" ]; then
 	    echo -n ' timed';		timed ${timed_flags}
     fi
 
     if [ "X${portmap_enable}" = X"YES" ]; then
 	    echo -n ' portmap';		portmap ${portmap_flags}
     fi
 
     # Start ypserv if we're an NIS server.
     # Run rpc.ypxfrd and rpc.yppasswdd only on the NIS master server.
     if [ "X${nis_server_enable}" = X"YES" ]; then
 	    echo -n ' ypserv'; ypserv ${nis_server_flags}
 	    
 	    if [ "X${nis_ypxfrd_enable}" = X"YES" ]; then
 		    echo -n ' rpc.ypxfrd'; rpc.ypxfrd ${nis_ypxfrd_flags}
 	    fi
 	    
 	    if [ "X${nis_yppasswdd_enable}" = X"YES" ]; then
 		    echo -n ' rpc.yppasswdd'; rpc.yppasswdd ${nis_yppasswdd_flags}
 	    fi
     fi
 
     # Start ypbind if we're an NIS client
     if [ "X${nis_client_enable}" = X"YES" ]; then
 	    echo -n ' ypbind'; ypbind ${nis_client_flags}
 	    if [ "X${nis_ypset_enable}" = X"YES" ]; then
 		    echo -n ' ypset'; ypset ${nis_ypset_flags}
 	    fi
     fi
 
     echo '.'
     network_pass2_done=YES
 }
 
 network_pass3() {
     echo -n 'Starting final network daemons:'
 
     if [ "X${nfs_server_enable}" = X"YES" -a -r /etc/exports ]; then
 	    echo -n ' mountd'
 	    if [ "X${weak_mountd_authentication}" = X"YES" ]; then
 		    mountd_flags="-n"
 	    fi
 	    mountd ${mountd_flags}
 	    if [ "X${nfs_reserved_port_only}" = X"YES" ]; then
 		    echo -n ' nfsprivport=YES'
 		    sysctl -w vfs.nfs.nfs_privport=1 >/dev/null 2>&1
 	    fi
 	    echo -n ' nfsd';		nfsd ${nfs_server_flags}
 	    if [ "X$rpc_lockd_enable" = X"YES" ]; then
 		echo -n ' rpc.lockd';		rpc.lockd
 	    fi
 	    if [ "X$rpc_statd_enable" = X"YES" ]; then
 		echo -n ' rpc.statd';		rpc.statd
 	    fi
     fi
     
     if [ "X${nfs_client_enable}" = X"YES" ]; then
 	    echo -n ' nfsiod';		nfsiod ${nfs_client_flags}
     fi
 
     if [ "X${amd_enable}" = X"YES" ]; then
 	    echo -n ' amd'
 	    amd -p ${amd_flags} > /var/run/amd.pid 2> /dev/null
     fi
 
     if [ "X${rwhod_enable}" = X"YES" ]; then
 	    echo -n ' rwhod';	rwhod
     fi
 
     # Kerberos runs ONLY on the Kerberos server machine
     if [ "X${kerberos_server_enable}" = X"YES" ]; then
 	    echo -n ' kerberos';	kerberos >> /var/log/kerberos.log &
 	    echo -n ' kadmind'; \
 		    (sleep 20; kadmind -n >/dev/null 2>&1 &) &
     fi
     
     # IP multicast routing daemon
     if [ "X${mrouted_enable}" = X"YES" ]; then
 	    echo -n ' mrouted'; mrouted ${mrouted_flags}
     fi
     echo '.'
     network_pass3_done=YES
 }