Index: head/sys/arm/conf/IMX53 =================================================================== --- head/sys/arm/conf/IMX53 (revision 329506) +++ head/sys/arm/conf/IMX53 (revision 329507) @@ -1,122 +1,122 @@ # # Kernel configuration for i.MX53 boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX53 include "std.armv7" include "../freescale/imx/std.imx53" options SOC_IMX53 options SCHED_4BSD # 4BSD scheduler #options NFSD # Network Filesystem Server options PLATFORM options INCLUDE_CONFIG_FILE # Include this file in kernel # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # Ethernet device ffec # Freescale Fast Ethernet Controller device miibus # Standard mii bus # Serial (COM) ports device uart # Multi-uart driver device ata device atapci # Only for helper functions device imxata device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ukbd # Allow keyboard like HIDs to control console device ums # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # MMC #device sdhci # SD controller #device mmc # SD/MMC protocol #device mmcsd # SDCard disk device # Flattened Device Tree options FDT # Configure using FDT/DTB data -makeoptions MODULES_EXTRA=dtb/imx5 +makeoptions MODULES_EXTRA="dtb/imx5 imx" options INTRNG Index: head/sys/arm/conf/IMX6 =================================================================== --- head/sys/arm/conf/IMX6 (revision 329506) +++ head/sys/arm/conf/IMX6 (revision 329507) @@ -1,128 +1,128 @@ # # Kernel configuration for Freescale i.MX6 systems. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX6 include "std.armv7" include "../freescale/imx/std.imx6" options INTRNG options SOC_IMX6 options SCHED_ULE # ULE scheduler #options NFSD # Network Filesystem Server options INCLUDE_CONFIG_FILE # Include this file in kernel options PLATFORM options SMP # Enable multiple cores # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 # U-Boot stuff lives on slice 1, FreeBSD on slice 2. options ROOTDEVNAME=\"ufs:mmcsd0s2a\" # Interrupt controller device gic # Cache controller device pl310 # PL310 L2 cache controller # ARM MPCore timer device mpcore_timer # Pseudo devices. device loop # Network loopback device random # Entropy device device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module device ether # Ethernet support device miibus # Required for ethernet device bpf # Berkeley packet filter (required for DHCP) # General-purpose input/output device gpio # Serial (COM) ports device uart # Multi-uart driver # SDCard device sdhci # SD controller device mmc # SD/MMC protocol device mmcsd # SDCard disk device # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # ATA controllers device ahci # AHCI-compatible SATA controllers # USB support device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB modems #device ukbd # Allow keyboard like HIDs to control console #device ums # USB mouse # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm device vt device kbdmux device ukbd device videomode device hdmi # Flattened Device Tree options FDT # Configure using FDT/DTB data -makeoptions MODULES_EXTRA=dtb/imx6 +makeoptions MODULES_EXTRA="dtb/imx6 imx" # SoC-specific devices device ffec # Freescale Fast Ethernet Controller device fsliic # Freescale i2c/iic device iic # iic protocol device iicbus # iic bus device imxwdt # Watchdog. WARNING: can't be disabled!!! Index: head/sys/modules/Makefile =================================================================== --- head/sys/modules/Makefile (revision 329506) +++ head/sys/modules/Makefile (revision 329507) @@ -1,840 +1,836 @@ # $FreeBSD$ SYSDIR?=${SRCTOP}/sys .include "${SYSDIR}/conf/kern.opts.mk" SUBDIR_PARALLEL= # Modules that include binary-only blobs of microcode should be selectable by # MK_SOURCELESS_UCODE option (see below). .if defined(MODULES_OVERRIDE) && !defined(ALL_MODULES) SUBDIR=${MODULES_OVERRIDE} .else SUBDIR= \ ${_3dfx} \ ${_3dfx_linux} \ ${_aac} \ ${_aacraid} \ accf_data \ accf_dns \ accf_http \ acl_nfs4 \ acl_posix1e \ ${_acpi} \ ae \ ${_aesni} \ age \ ${_agp} \ aha \ ahci \ ${_aic} \ aic7xxx \ alc \ ale \ alq \ ${_amd_ecc_inject} \ ${_amdsbwd} \ ${_amdsmn} \ ${_amdtemp} \ amr \ ${_an} \ ${_aout} \ ${_apm} \ ${_arcmsr} \ ${_arcnet} \ ${_armv8crypto} \ ${_asmc} \ ata \ ath \ ath_dfs \ ath_hal \ ath_hal_ar5210 \ ath_hal_ar5211 \ ath_hal_ar5212 \ ath_hal_ar5416 \ ath_hal_ar9300 \ ath_main \ ath_rate \ ath_pci \ ${_autofs} \ ${_auxio} \ ${_bce} \ ${_bcm283x_clkman} \ ${_bcm283x_pwm} \ bfe \ bge \ bhnd \ ${_bxe} \ ${_bios} \ ${_bktr} \ ${_bm} \ bnxt \ bridgestp \ bwi \ bwn \ ${_bytgpio} \ cam \ ${_cardbus} \ ${_carp} \ cas \ ${_cbb} \ cc \ ${_ccp} \ cd9660 \ cd9660_iconv \ ${_ce} \ ${_cfi} \ chacha20 \ ${_chromebook_platform} \ ${_ciss} \ cloudabi \ ${_cloudabi32} \ ${_cloudabi64} \ ${_cm} \ ${_cmx} \ ${_coff} \ ${_coretemp} \ ${_cp} \ ${_cpsw} \ ${_cpuctl} \ ${_cpufreq} \ ${_crypto} \ ${_cryptodev} \ ${_cs} \ ${_ctau} \ ctl \ ${_cxgb} \ ${_cxgbe} \ dc \ dcons \ dcons_crom \ de \ ${_dpms} \ ${_dpt} \ ${_drm} \ ${_drm2} \ dummynet \ ${_ed} \ ${_efirt} \ ${_em} \ ${_ena} \ ${_ep} \ ${_epic} \ esp \ ${_et} \ evdev \ ${_ex} \ ${_exca} \ ext2fs \ fdc \ fdescfs \ ${_fe} \ ${_ffec} \ filemon \ firewire \ firmware \ fuse \ ${_fxp} \ gem \ geom \ ${_glxiic} \ ${_glxsb} \ gpio \ hifn \ hme \ ${_hpt27xx} \ ${_hptiop} \ ${_hptmv} \ ${_hptnr} \ ${_hptrr} \ hwpmc \ ${_hwpmc_mips24k} \ ${_hwpmc_mips74k} \ ${_hyperv} \ i2c \ ${_ibcore} \ ${_ibcs2} \ ${_ichwd} \ ${_ida} \ if_bridge \ if_disc \ if_edsc \ ${_if_enc} \ if_epair \ ${_if_gif} \ ${_if_gre} \ ${_if_me} \ if_lagg \ ${_if_ndis} \ ${_if_stf} \ if_tap \ if_tun \ if_vlan \ if_vxlan \ ${_iir} \ imgact_binmisc \ ${_intelspi} \ ${_io} \ ${_ioat} \ ${_ipoib} \ ${_ipdivert} \ ${_ipfilter} \ ${_ipfw} \ ipfw_nat \ ${_ipfw_nat64} \ ${_ipfw_nptv6} \ ${_ipfw_pmod} \ ${_ipmi} \ ip6_mroute_mod \ ip_mroute_mod \ ${_ips} \ ${_ipsec} \ ${_ipw} \ ${_ipwfw} \ ${_isci} \ ${_iser} \ isp \ ${_ispfw} \ ${_iwi} \ ${_iwifw} \ ${_iwm} \ ${_iwmfw} \ ${_iwn} \ ${_iwnfw} \ ${_ix} \ ${_ixv} \ ${_ixgb} \ ${_ixl} \ ${_ixlv} \ jme \ joy \ kbdmux \ kgssapi \ kgssapi_krb5 \ khelp \ krpc \ ksyms \ le \ lge \ libalias \ libiconv \ libmchain \ ${_linprocfs} \ ${_linsysfs} \ ${_linux} \ ${_linux_common} \ ${_linux64} \ linuxkpi \ ${_lio} \ lmc \ lpt \ mac_biba \ mac_bsdextended \ mac_ifoff \ mac_lomac \ mac_mls \ mac_none \ mac_partition \ mac_portacl \ mac_seeotheruids \ mac_stub \ mac_test \ malo \ md \ mdio \ mem \ mfi \ mii \ mlx \ ${_mlx4} \ ${_mlx4ib} \ ${_mlx4en} \ ${_mlx5} \ ${_mlx5en} \ ${_mlx5ib} \ ${_mly} \ mmc \ mmcsd \ mpr \ mps \ mpt \ mqueue \ mrsas \ msdosfs \ msdosfs_iconv \ ${_mse} \ msk \ ${_mthca} \ mvs \ mwl \ ${_mwlfw} \ mxge \ my \ ${_nandfs} \ ${_nandsim} \ ${_ncr} \ ${_nctgpio} \ ${_ncv} \ ${_ndis} \ ${_netgraph} \ ${_nfe} \ nfscl \ nfscommon \ nfsd \ nfslock \ nfslockd \ nfssvc \ nge \ nmdm \ ${_nsp} \ nullfs \ ${_ntb} \ ${_nvd} \ ${_nvme} \ ${_nvram} \ ${_nxge} \ oce \ otus \ ${_otusfw} \ ow \ ${_padlock} \ ${_padlock_rng} \ ${_pccard} \ ${_pcfclock} \ pcn \ ${_pf} \ ${_pflog} \ ${_pfsync} \ plip \ ${_pms} \ ppbus \ ppc \ ppi \ pps \ procfs \ proto \ pseudofs \ ${_pst} \ pty \ puc \ ${_qlxge} \ ${_qlxgb} \ ${_qlxgbe} \ ${_qlnx} \ ral \ ${_ralfw} \ ${_random_fortuna} \ ${_random_yarrow} \ ${_random_other} \ rc4 \ ${_rdma} \ ${_rdrand_rng} \ re \ rl \ rtwn \ rtwn_pci \ rtwn_usb \ ${_rtwnfw} \ ${_s3} \ ${_safe} \ ${_sbni} \ scc \ ${_scsi_low} \ sdhci \ ${_sdhci_acpi} \ sdhci_pci \ sem \ send \ ${_sf} \ ${_sfxge} \ sge \ ${_sgx} \ ${_sgx_linux} \ siftr \ siis \ sis \ sk \ smbfs \ sn \ snp \ sound \ ${_speaker} \ spigen \ ${_splash} \ ${_sppp} \ ste \ ${_stg} \ stge \ ${_sym} \ ${_syscons} \ sysvipc \ tcp \ ${_ti} \ tl \ tmpfs \ ${_toecore} \ ${_tpm} \ trm \ ${_twa} \ twe \ tws \ tx \ ${_txp} \ uart \ ubsec \ udf \ udf_iconv \ ufs \ uinput \ unionfs \ usb \ ${_vesa} \ ${_virtio} \ vge \ ${_viawd} \ videomode \ vkbd \ ${_vmm} \ ${_vmware} \ ${_vpo} \ vr \ vte \ vx \ ${_vxge} \ wb \ ${_wbwd} \ ${_wi} \ wlan \ wlan_acl \ wlan_amrr \ wlan_ccmp \ wlan_rssadapt \ wlan_tkip \ wlan_wep \ wlan_xauth \ ${_wpi} \ ${_wpifw} \ ${_x86bios} \ ${_xe} \ xl \ zlib .if ${MK_AUTOFS} != "no" || defined(ALL_MODULES) _autofs= autofs .endif .if ${MK_CDDL} != "no" || defined(ALL_MODULES) .if (${MACHINE_CPUARCH} != "arm" || ${MACHINE_ARCH:Marmv[67]*} != "") && \ ${MACHINE_CPUARCH} != "mips" && \ ${MACHINE_CPUARCH} != "sparc64" SUBDIR+= dtrace .endif SUBDIR+= opensolaris .endif .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) .if exists(${SRCTOP}/sys/opencrypto) _crypto= crypto _cryptodev= cryptodev _random_fortuna=random_fortuna _random_yarrow= random_yarrow _random_other= random_other .endif .endif .if ${MK_CUSE} != "no" || defined(ALL_MODULES) SUBDIR+= cuse .endif .if (${MK_INET_SUPPORT} != "no" || ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _carp= carp _toecore= toecore _if_enc= if_enc _if_gif= if_gif _if_gre= if_gre _ipfw_pmod= ipfw_pmod .if ${MK_IPSEC_SUPPORT} != "no" _ipsec= ipsec .endif .endif .if (${MK_INET_SUPPORT} != "no" && ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _if_stf= if_stf .endif .if ${MK_INET_SUPPORT} != "no" || defined(ALL_MODULES) _if_me= if_me _ipdivert= ipdivert _ipfw= ipfw .if ${MK_INET6_SUPPORT} != "no" || defined(ALL_MODULES) _ipfw_nat64= ipfw_nat64 .endif .endif .if ${MK_INET6_SUPPORT} != "no" || defined(ALL_MODULES) _ipfw_nptv6= ipfw_nptv6 .endif .if ${MK_IPFILTER} != "no" || defined(ALL_MODULES) _ipfilter= ipfilter .endif .if ${MK_ISCSI} != "no" || defined(ALL_MODULES) SUBDIR+= cfiscsi SUBDIR+= iscsi SUBDIR+= iscsi_initiator .endif .if ${MK_NAND} != "no" || defined(ALL_MODULES) _nandfs= nandfs _nandsim= nandsim .endif .if ${MK_NETGRAPH} != "no" || defined(ALL_MODULES) _netgraph= netgraph .endif .if (${MK_PF} != "no" && (${MK_INET_SUPPORT} != "no" || \ ${MK_INET6_SUPPORT} != "no")) || defined(ALL_MODULES) _pf= pf _pflog= pflog .if ${MK_INET_SUPPORT} != "no" _pfsync= pfsync .endif .endif .if ${MK_SOURCELESS_UCODE} != "no" _bce= bce _fxp= fxp _ispfw= ispfw _sf= sf _ti= ti _txp= txp .if ${MACHINE_CPUARCH} != "mips" _mwlfw= mwlfw _otusfw= otusfw _ralfw= ralfw _rtwnfw= rtwnfw .endif .endif .if ${MK_SOURCELESS_UCODE} != "no" && ${MACHINE_CPUARCH} != "arm" && \ ${MACHINE_CPUARCH} != "mips" && \ ${MACHINE_ARCH} != "powerpc" && ${MACHINE_ARCH} != "powerpcspe" && \ ${MACHINE_CPUARCH} != "riscv" _cxgbe= cxgbe .endif .if ${MK_TESTS} != "no" || defined(ALL_MODULES) SUBDIR+= tests .endif .if ${MK_ZFS} != "no" || defined(ALL_MODULES) SUBDIR+= zfs .endif .if (${MACHINE_CPUARCH} == "mips" && ${MACHINE_ARCH:Mmips64} == "") _hwpmc_mips24k= hwpmc_mips24k _hwpmc_mips74k= hwpmc_mips74k .endif .if ${MACHINE_CPUARCH} != "aarch64" && ${MACHINE_CPUARCH} != "arm" && \ ${MACHINE_CPUARCH} != "mips" && ${MACHINE_CPUARCH} != "powerpc" && \ ${MACHINE_CPUARCH} != "riscv" _syscons= syscons _vpo= vpo .endif .if ${MACHINE_CPUARCH} != "mips" # no BUS_SPACE_UNSPECIFIED # No barrier instruction support (specific to this driver) _sym= sym # intr_disable() is a macro, causes problems .if ${MK_SOURCELESS_UCODE} != "no" _cxgb= cxgb .endif .endif .if ${MACHINE_CPUARCH} == "aarch64" _armv8crypto= armv8crypto _efirt= efirt _em= em .endif .if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64" _agp= agp _an= an _aout= aout _bios= bios _bktr= bktr .if ${MK_SOURCELESS_UCODE} != "no" _bxe= bxe .endif _cardbus= cardbus _cbb= cbb _cpuctl= cpuctl _cpufreq= cpufreq _cs= cs _dpms= dpms _drm= drm _drm2= drm2 _ed= ed _em= em _ena= ena _ep= ep _et= et _exca= exca _fe= fe .if ${MK_OFED} != "no" || defined(ALL_MODULES) _ibcore= ibcore .endif _if_ndis= if_ndis _io= io .if ${MK_OFED} != "no" || defined(ALL_MODULES) _ipoib= ipoib _iser= iser .endif _ix= ix _ixv= ixv _linprocfs= linprocfs _linsysfs= linsysfs _linux= linux .if ${MK_SOURCELESS_UCODE} != "no" _lio= lio .endif _nctgpio= nctgpio _ndis= ndis _pccard= pccard .if ${MK_OFED} != "no" || defined(ALL_MODULES) _rdma= rdma .endif _safe= safe _scsi_low= scsi_low _speaker= speaker _splash= splash _sppp= sppp _vmware= vmware _vxge= vxge _wbwd= wbwd _wi= wi _xe= xe _aac= aac _aacraid= aacraid _acpi= acpi .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) _aesni= aesni .endif _amd_ecc_inject=amd_ecc_inject _amdsbwd= amdsbwd _amdsmn= amdsmn _amdtemp= amdtemp _arcmsr= arcmsr _asmc= asmc _bytgpio= bytgpio _ciss= ciss _chromebook_platform= chromebook_platform _cmx= cmx _coretemp= coretemp .if ${MK_SOURCELESS_HOST} != "no" _hpt27xx= hpt27xx .endif _hptiop= hptiop .if ${MK_SOURCELESS_HOST} != "no" _hptmv= hptmv _hptnr= hptnr _hptrr= hptrr .endif _hyperv= hyperv _ichwd= ichwd _ida= ida _iir= iir _intelspi= intelspi _ipmi= ipmi _ips= ips _isci= isci _ipw= ipw _iwi= iwi _iwm= iwm _iwn= iwn _ixgb= ixgb .if ${MK_SOURCELESS_UCODE} != "no" _ipwfw= ipwfw _iwifw= iwifw _iwmfw= iwmfw _iwnfw= iwnfw .endif _mlx4= mlx4 _mlx5= mlx5 .if (${MK_INET_SUPPORT} != "no" && ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _mlx4en= mlx4en _mlx5en= mlx5en .endif .if ${MK_OFED} != "no" || defined(ALL_MODULES) _mthca= mthca _mlx4ib= mlx4ib _mlx5ib= mlx5ib .endif _mly= mly _nfe= nfe _nvd= nvd _nvme= nvme _nvram= nvram _nxge= nxge .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) _padlock= padlock _padlock_rng= padlock_rng _rdrand_rng= rdrand_rng .endif _s3= s3 _sdhci_acpi= sdhci_acpi _tpm= tpm _twa= twa _vesa= vesa _viawd= viawd _virtio= virtio _wpi= wpi .if ${MK_SOURCELESS_UCODE} != "no" _wpifw= wpifw .endif _x86bios= x86bios .endif .if ${MACHINE_CPUARCH} == "amd64" _ccp= ccp _efirt= efirt _ioat= ioat _ixl= ixl _ixlv= ixlv _linux64= linux64 _linux_common= linux_common _ntb= ntb _pms= pms _qlxge= qlxge _qlxgb= qlxgb .if ${MK_SOURCELESS_UCODE} != "no" _qlxgbe= qlxgbe _qlnx= qlnx .endif _sfxge= sfxge _sgx= sgx _sgx_linux= sgx_linux .if ${MK_BHYVE} != "no" || defined(ALL_MODULES) _vmm= vmm .endif .endif .if ${MACHINE_CPUARCH} == "i386" # XXX some of these can move to the general case when de-i386'ed # XXX some of these can move now, but are untested on other architectures. _3dfx= 3dfx _3dfx_linux= 3dfx_linux _aic= aic _apm= apm _arcnet= arcnet .if ${MK_SOURCELESS_UCODE} != "no" _ce= ce .endif _coff= coff .if ${MK_SOURCELESS_UCODE} != "no" _cp= cp .endif _glxiic= glxiic _glxsb= glxsb #_ibcs2= ibcs2 _mse= mse _ncr= ncr _ncv= ncv _nsp= nsp _pcfclock= pcfclock _pst= pst _sbni= sbni _stg= stg _cm= cm .if ${MK_SOURCELESS_UCODE} != "no" _ctau= ctau .endif _dpt= dpt _ex= ex .endif .if ${MACHINE_CPUARCH} == "arm" _cfi= cfi _cpsw= cpsw .endif .if ${MACHINE_CPUARCH} == "powerpc" _agp= agp _an= an _bm= bm _cardbus= cardbus _cbb= cbb _cfi= cfi _cpufreq= cpufreq _drm= drm _exca= exca _ffec= ffec _pccard= pccard _wi= wi .endif .if ${MACHINE_ARCH} == "powerpc64" _drm2= drm2 .endif .if ${MACHINE_ARCH} == "powerpc64" || ${MACHINE_ARCH} == "powerpc" # Don't build powermac_nvram for powerpcspe, it's never supported. _nvram= powermac_nvram .endif .if ${MACHINE_CPUARCH} == "sparc64" _auxio= auxio _em= em _epic= epic .endif .if (${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" || \ ${MACHINE_ARCH:Marmv[67]*} != "" || ${MACHINE_CPUARCH} == "i386") _cloudabi32= cloudabi32 .endif .if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" _cloudabi64= cloudabi64 .endif .endif .if ${MACHINE_ARCH:Marmv[67]*} != "" || ${MACHINE_CPUARCH} == "aarch64" _bcm283x_clkman= bcm283x_clkman _bcm283x_pwm= bcm283x_pwm .endif -.if ${MACHINE_ARCH:Marmv[67]*} != "" -_ffec= ffec -.endif - SUBDIR+=${MODULES_EXTRA} .for reject in ${WITHOUT_MODULES} SUBDIR:= ${SUBDIR:N${reject}} .endfor # Calling kldxref(8) for each module is expensive. .if !defined(NO_XREF) .MAKEFLAGS+= -DNO_XREF afterinstall: .PHONY @if type kldxref >/dev/null 2>&1; then \ ${ECHO} kldxref ${DESTDIR}${KMODDIR}; \ kldxref ${DESTDIR}${KMODDIR}; \ fi .endif .include "${SYSDIR}/conf/config.mk" SUBDIR:= ${SUBDIR:u:O} .include Index: head/sys/modules/imx/Makefile =================================================================== --- head/sys/modules/imx/Makefile (nonexistent) +++ head/sys/modules/imx/Makefile (revision 329507) @@ -0,0 +1,8 @@ +# $FreeBSD$ +# Build modules specific to freescale/nxp imx-family SoCs. + +SUBDIR = \ + ../ffec \ + imx_i2c \ + +.include Property changes on: head/sys/modules/imx/Makefile ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: head/sys/modules/imx/imx_i2c/Makefile =================================================================== --- head/sys/modules/imx/imx_i2c/Makefile (nonexistent) +++ head/sys/modules/imx/imx_i2c/Makefile (revision 329507) @@ -0,0 +1,15 @@ +# $FreeBSD$ + +.PATH: ${SRCTOP}/sys/arm/freescale/imx + +KMOD= imx_i2c +SRCS= imx_i2c.c + +SRCS+= \ + bus_if.h \ + device_if.h \ + iicbus_if.h \ + ofw_bus_if.h \ + opt_platform.h \ + +.include Property changes on: head/sys/modules/imx/imx_i2c/Makefile ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property