Index: projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd_replace_001_pos.ksh
===================================================================
--- projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd_replace_001_pos.ksh	(revision 329027)
+++ projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd_replace_001_pos.ksh	(revision 329028)
@@ -1,87 +1,81 @@
 #!/usr/local/bin/ksh93 -p
 #
 # CDDL HEADER START
 #
 # The contents of this file are subject to the terms of the
 # Common Development and Distribution License (the "License").
 # You may not use this file except in compliance with the License.
 #
 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 # or http://www.opensolaris.org/os/licensing.
 # See the License for the specific language governing permissions
 # and limitations under the License.
 #
 # When distributing Covered Code, include this CDDL HEADER in each
 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 # If applicable, add the following below this CDDL HEADER, with the
 # fields enclosed by brackets "[]" replaced with your own identifying
 # information: Portions Copyright [yyyy] [name of copyright owner]
 #
 # CDDL HEADER END
 #
 
 #
 # Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
 # Use is subject to license terms.
 #
 # Copyright 2012,2013 Spectra Logic Corporation.  All rights reserved.
 # Use is subject to license terms.
 # 
 # Portions taken from:
 # ident	"@(#)replacement_001_pos.ksh	1.4	08/02/27 SMI"
 #
 # $FreeBSD$
 
 . $STF_SUITE/tests/hotspare/hotspare.kshlib
 . $STF_SUITE/tests/zfsd/zfsd.kshlib
 . $STF_SUITE/include/libtest.kshlib
-. $STF_SUITE/include/libsas.kshlib
+. $STF_SUITE/include/libgnop.kshlib
 
-verify_runnable "global"
+log_assert "ZFSD will automatically replace a SAS disk that dissapears and reappears in the same location, with the same devname"
 
-log_assert "Failing a disk from a SAS expander is recognized by ZFS"
-
-log_onexit autoreplace_cleanup
 ensure_zfsd_running
 
-child_pids=""
+set_disks
 
-set -A TMPDISKS $DISKS
-typeset REMOVAL_DISK=${TMPDISKS[0]}
-REMOVAL_DISK=${REMOVAL_DISK##*/}
+typeset REMOVAL_DISK=$DISK0
+typeset REMOVAL_NOP=${DISK0}.nop
+typeset OTHER_DISKS="${DISK1} ${DISK2}"
+typeset ALLDISKS="${DISK0} ${DISK1} ${DISK2}"
+typeset ALLNOPS=${ALLDISKS//~(E)([[:space:]]+|$)/.nop\1}
 
+log_must create_gnops $ALLDISKS
 for type in "raidz" "mirror"; do
 	# Create a pool on the supplied disks
-	create_pool $TESTPOOL $type $DISKS
+	create_pool $TESTPOOL $type $ALLNOPS
 	log_must $ZFS create $TESTPOOL/$TESTFS
 	log_must $ZFS set mountpoint=$TESTDIR $TESTPOOL/$TESTFS
 
-	# Find the first disk, get the expander and phy
-	log_note "Looking for expander and phy information for $REMOVAL_DISK"
-	find_verify_sas_disk $REMOVAL_DISK
+	# Disable the first disk.
+	log_must destroy_gnop $REMOVAL_DISK
 
-	log_note "Disabling \"$REMOVAL_DISK\" on expander $EXPANDER phy $PHY"
-	# Disable the first disk.  We have to do this first, because if
-	# there is I/O active to the
-	disable_sas_disk $EXPANDER $PHY
-
 	# Write out data to make sure we can do I/O after the disk failure
-	log_must $DD if=/dev/zero of=$TESTDIR/$TESTFILE bs=1m count=512
+	log_must $DD if=/dev/zero of=$TESTDIR/$TESTFILE bs=1m count=1
+	log_must $FSYNC $TESTDIR/$TESTFILE
 
 	# Check to make sure ZFS sees the disk as removed
-	wait_for_pool_removal 20
+	wait_for_pool_dev_state_change 20 $REMOVAL_NOP REMOVED
 
-	# Re-enable the disk, we don't want to leave it turned off
-	log_note "Re-enabling phy $PHY on expander $EXPANDER"
-	enable_sas_disk $EXPANDER $PHY
+	# Re-enable the disk
+	log_must create_gnop $REMOVAL_DISK
 
 	# Disk should auto-join the zpool & be resilvered.
-	wait_for_pool_dev_state_change 20 $REMOVAL_DISK ONLINE
+	wait_for_pool_dev_state_change 20 $REMOVAL_NOP ONLINE
 	wait_until_resilvered
 
 	$ZPOOL status $TESTPOOL
 	destroy_pool $TESTPOOL
 	log_must $RM -rf /$TESTPOOL
 done
 
 log_pass
Index: projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd_test.sh
===================================================================
--- projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd_test.sh	(revision 329027)
+++ projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd_test.sh	(revision 329028)
@@ -1,589 +1,589 @@
 # CDDL HEADER START
 #
 # The contents of this file are subject to the terms of the
 # Common Development and Distribution License (the "License").
 # You may not use this file except in compliance with the License.
 #
 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 # or http://www.opensolaris.org/os/licensing.
 # See the License for the specific language governing permissions
 # and limitations under the License.
 #
 # When distributing Covered Code, include this CDDL HEADER in each
 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 # If applicable, add the following below this CDDL HEADER, with the
 # fields enclosed by brackets "[]" replaced with your own identifying
 # information: Portions Copyright [yyyy] [name of copyright owner]
 #
 # CDDL HEADER END
 #
 
 #
 # Copyright 2012,2013 Spectra Logic.  All rights reserved.
 # Use is subject to license terms.
 #
 
 
 atf_test_case zfsd_fault_001_pos cleanup
 zfsd_fault_001_pos_head()
 {
 	atf_set "descr" "ZFS will fault a vdev that produces IO errors"
 	atf_set "require.progs"  zfs zpool zfsd
 	atf_set "timeout" 300
 }
 zfsd_fault_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	verify_disk_count "$DISKS" 2
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_fault_001_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_fault_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case zfsd_degrade_001_pos cleanup
 zfsd_degrade_001_pos_head()
 {
 	atf_set "descr" "ZFS will degrade a vdev that produces checksum errors"
 	atf_set "require.progs"  zpool zfsd
 	atf_set "timeout" 600
 }
 zfsd_degrade_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	verify_disk_count "$DISKS" 2
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_degrade_001_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_degrade_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_degrade_002_pos cleanup
 zfsd_degrade_002_pos_head()
 {
 	atf_set "descr" "ZFS will degrade a spare that produces checksum errors"
 	atf_set "require.progs"  zpool zfsd
 	atf_set "timeout" 600
 }
 zfsd_degrade_002_pos_body()
 {
 	atf_expect_fail "https://www.illumos.org/issues/8614 Checksum errors on a mirrored child of a raidz are incorrectly accounted"
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_degrade_002_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_degrade_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case zfsd_hotspare_001_pos cleanup
 zfsd_hotspare_001_pos_head()
 {
 	atf_set "descr" "An active, damaged spare will be replaced by an available spare"
 	atf_set "require.progs"  zpool zfsd
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_001_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_hotspare_002_pos cleanup
 zfsd_hotspare_002_pos_head()
 {
 	atf_set "descr" "If a vdev becomes degraded, the spare will be activated."
 	atf_set "require.progs"  zpool zfsd zinject
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_002_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_002_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case zfsd_hotspare_003_pos cleanup
 zfsd_hotspare_003_pos_head()
 {
 	atf_set "descr" "A faulted vdev will be replaced by an available spare"
 	atf_set "require.progs"  zpool zfsd zinject
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_003_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_003_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_003_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_hotspare_004_pos cleanup
 zfsd_hotspare_004_pos_head()
 {
 	atf_set "descr" "Removing a disk from a pool results in the spare activating"
 	atf_set "require.progs"  gnop zpool camcontrol zfsd
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_004_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_004_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_004_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_hotspare_005_pos cleanup
 zfsd_hotspare_005_pos_head()
 {
 	atf_set "descr" "A spare that is added to a degraded pool will be activated"
 	atf_set "require.progs"  zpool zfsd zinject
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_005_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_005_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_005_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_hotspare_006_pos cleanup
 zfsd_hotspare_006_pos_head()
 {
 	atf_set "descr" "zfsd will replace two vdevs that fail simultaneously"
 	atf_set "require.progs"  zpool zfsd zinject
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_006_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_006_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_006_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_hotspare_007_pos cleanup
 zfsd_hotspare_007_pos_head()
 {
 	atf_set "descr" "zfsd will swap failed drives at startup"
 	atf_set "require.progs"  gnop zpool camcontrol zfsd
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_007_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_007_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_007_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_hotspare_008_neg cleanup
 zfsd_hotspare_008_neg_head()
 {
 	atf_set "descr" "zfsd will not use newly added spares on replacing vdevs"
 	atf_set "require.progs"  zpool zfsd
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_008_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 4
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_008_neg.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_008_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_autoreplace_001_neg cleanup
 zfsd_autoreplace_001_neg_head()
 {
 	atf_set "descr" "A pool without autoreplace set will not replace by physical path"
 	atf_set "require.progs"  zpool camcontrol zfsd
 	atf_set "timeout" 3600
 }
 zfsd_autoreplace_001_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_autoreplace_001_neg.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_autoreplace_001_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_autoreplace_002_pos cleanup
 zfsd_autoreplace_002_pos_head()
 {
 	atf_set "descr" "A pool with autoreplace set will replace by physical path"
 	atf_set "require.progs"  gnop zpool zfsd
 	atf_set "timeout" 3600
 }
 zfsd_autoreplace_002_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_autoreplace_002_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_autoreplace_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_autoreplace_003_pos cleanup
 zfsd_autoreplace_003_pos_head()
 {
 	atf_set "descr" "A pool with autoreplace set will replace by physical path even if a spare is active"
 	atf_set "require.progs"  zpool camcontrol zfsd
 	atf_set "timeout" 3600
 }
 zfsd_autoreplace_003_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_autoreplace_003_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_autoreplace_003_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_replace_001_pos cleanup
 zfsd_replace_001_pos_head()
 {
 	atf_set "descr" "ZFSD will automatically replace a SAS disk that dissapears and reappears in the same location, with the same devname"
 	atf_set "require.progs"  zpool camcontrol zfsd zfs
 }
 zfsd_replace_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
-	verify_disk_count "$DISKS" 2
+	verify_disk_count "$DISKS" 3
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_replace_001_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_replace_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case zfsd_replace_002_pos cleanup
 zfsd_replace_002_pos_head()
 {
 	atf_set "descr" "A pool can come back online after all disks have dissapeared and reappeared"
 	atf_set "require.progs"  zpool camcontrol zfsd zfs
 }
 zfsd_replace_002_pos_body()
 {
 	atf_expect_fail "ZFS hangs when an array becomes critical"
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	verify_disk_count "$DISKS" 2
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_replace_002_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_replace_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_replace_003_pos cleanup
 zfsd_replace_003_pos_head()
 {
 	atf_set "descr" "ZFSD will correctly replace disks that dissapear and reappear with different devnames"
 	atf_set "require.progs"  zpool camcontrol zfsd zfs
 }
 zfsd_replace_003_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_replace_003_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_replace_003_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_import_001_pos cleanup
 zfsd_import_001_pos_head()
 {
 	atf_set "descr" "If a removed drive gets reinserted while the pool is exported, it will detach its spare when imported."
 	atf_set "require.progs"  gnop zfsd zpool
 	atf_set "timeout" 3600
 }
 zfsd_import_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_import_001_pos.ksh || atf_fail "Testcase failed"
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_import_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 
 
 atf_init_test_cases()
 {
 	atf_add_test_case zfsd_fault_001_pos
 	atf_add_test_case zfsd_degrade_001_pos
 	atf_add_test_case zfsd_degrade_002_pos
 	atf_add_test_case zfsd_hotspare_001_pos
 	atf_add_test_case zfsd_hotspare_002_pos
 	atf_add_test_case zfsd_hotspare_003_pos
 	atf_add_test_case zfsd_hotspare_004_pos
 	atf_add_test_case zfsd_hotspare_005_pos
 	atf_add_test_case zfsd_hotspare_006_pos
 	atf_add_test_case zfsd_hotspare_007_pos
 	atf_add_test_case zfsd_hotspare_008_neg
 	atf_add_test_case zfsd_autoreplace_001_neg
 	atf_add_test_case zfsd_autoreplace_002_pos
 	atf_add_test_case zfsd_autoreplace_003_pos
 	atf_add_test_case zfsd_replace_001_pos
 	atf_add_test_case zfsd_replace_002_pos
 	atf_add_test_case zfsd_replace_003_pos
 	atf_add_test_case zfsd_import_001_pos
 }
 
 save_artifacts()
 {
 	# If ARTIFACTS_DIR is defined, save test artifacts for
 	# post-mortem analysis
 	if [[ -n $ARTIFACTS_DIR ]]; then
 		TC_ARTIFACTS_DIR=${ARTIFACTS_DIR}/sys/cddl/zfs/tests/zfsd/$(atf_get ident)
 		mkdir -p $TC_ARTIFACTS_DIR
 		cp -a /var/log/zfsd.log* $TC_ARTIFACTS_DIR
 		bzip2 $TC_ARTIFACTS_DIR/zfsd.log
 	fi
 }