Index: head/sys/arm/conf/EB9200 =================================================================== --- head/sys/arm/conf/EB9200 (revision 328983) +++ head/sys/arm/conf/EB9200 (nonexistent) @@ -1,118 +0,0 @@ -# EB9200 - Custom kernel for the Embest ATEB9200 AT91RM9200 evaluation board. -# -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: -# -# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -#NO_UNIVERSE - -ident EB9200 - -include "std.arm" -include "../at91/std.eb9200" -# The AT91 platform doesn't use /boot/loader, so we have to statically wire -# hints. -hints "EB9200.hints" -makeoptions MODULES_OVERRIDE="" - -options SCHED_4BSD # 4BSD scheduler -options INET # InterNETworking -#options INET6 # IPv6 communications protocols -options TCP_HHOOK # hhook(9) framework for TCP -options FFS # Berkeley Fast Filesystem -#options SOFTUPDATES # Enable FFS soft updates support -#options UFS_ACL # Support for access control lists -#options UFS_DIRHASH # Improve performance on big directories -#options MD_ROOT # MD is a potential root device -#options MD_ROOT_SIZE=4096 # 4MB ram disk -#options ROOTDEVNAME=\"ufs:/dev/da0s1a\" -options NFSCL # Network Filesystem Client -options NFSD # Network Filesystem Server -options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem -#options MSDOSFS # MSDOS Filesystem -#options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) -options PSEUDOFS # Pseudo-filesystem framework -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -#options KTRACE # ktrace(1) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions - -# NFS root from boopt/dhcp -options BOOTP -options BOOTP_NFSROOT - -# Disable the inlining of mutex, rwlock and sx locks. These eat up a lot -# of space. -options MUTEX_NOINLINE -options SX_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -#options NO_SYSCTL_DESCR -options RWLOCK_NOINLINE - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# Ethernet -device ate # Atmel AT91 Ethernet driver -device miibus -#device lxtphy - -# I2C -device at91_twi # Atmel AT91 Two-wire Interface -device iic # I2C generic I/O device driver -device iicbus # I2C bus system -device icee - -# MMC/SD -device at91_mci # Atmel AT91 Multimedia Card Interface -device mmc # MMC/SD bus -device mmcsd # MMC/SD memory card - -device at91_spi # Atmel AT91 Serial Peripheral Interface -device spibus # SPI bus - -# Pseudo devices. -device loop # Network loopback -device random # Entropy device -device ether # Ethernet support -device md # Memory "disks" - -# SCSI peripherals -device scbus # SCSI bus (required for ATA/SCSI) -device da # Direct Access (disks) -device cd # CD -device pass # Passthrough device (direct ATA/SCSI access) - -# Serial (COM) ports -device uart # Multi-uart driver - -# USB support -device ohci # OHCI USB interface -device usb # USB Bus (required) -device umass # Disks/Mass storage - Requires scbus and da - -# USB device (gadget) support -#device at91_dci # Atmel's usb device -#device cdce # emulate an ethernet -#device usb_template # Control of the gadget - -device at91_cfata -device ata Property changes on: head/sys/arm/conf/EB9200 ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/SAM9X25EK =================================================================== --- head/sys/arm/conf/SAM9X25EK (revision 328983) +++ head/sys/arm/conf/SAM9X25EK (nonexistent) @@ -1,155 +0,0 @@ -# Kernel configuration for Atmel AT91SAM9G20EK Rev B. development card -# -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: -# -# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -#NO_UNIVERSE - -ident SAM9X25EK - -include "std.arm" -include "../at91/std.sam9x25ek" - -#To statically compile in device wiring instead of /boot/device.hints -hints "SAM9G20EK.hints" -makeoptions MODULES_OVERRIDE="" - -options SCHED_4BSD # 4BSD scheduler -options INET # InterNETworking -#options INET6 # IPv6 communications protocols -options TCP_HHOOK # hhook(9) framework for TCP -options FFS # Berkeley Fast Filesystem -#options SOFTUPDATES # Enable FFS soft updates support -#options UFS_ACL # Support for access control lists -#options UFS_DIRHASH # Improve performance on big directories -#options MD_ROOT # MD is a potential root device -#options MD_ROOT_SIZE=4096 # 4MB ram disk -options NFSCL # Network Filesystem Client -#options NFSD # Network Filesystem Server -#options NFSLOCKD # Network Lock Manager -#options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem -#options MSDOSFS # MSDOS Filesystem -#options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) -#options PSEUDOFS # Pseudo-filesystem framework -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -#options KTRACE # ktrace(1) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions - -# NFS root from boopt/dhcp -#options BOOTP -#options BOOTP_NFSROOT -#options BOOTP_COMPAT -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=ate0 - -# alternatively, boot from a MMC/SD memory card -options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" - -# kernel/memory size reduction -options MUTEX_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -options RWLOCK_NOINLINE - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# Ethernet -device mii # Minimal MII support -device ate # Atmel AT91 Ethernet driver -options AT91_ATE_USE_RMII - -# I2C -#device at91_twi # Atmel AT91 Two-wire Interface -device iic -device iicbus -device icee - -# NOTE: SPI DataFlash and mci/mmc/mmcsd have hardware -# confilict on this card. Use one or the other. -# see board_sam9g20ek.c - -# MMC/SD -device at91_mci # Atmel AT91 Multimedia Card Interface -options AT91_MCI_HAS_4WIRE -#options AT91_MCI_SLOT_B -device mmc # MMC/SD bus -device mmcsd # MMC/SD memory card - -# DataFlash -#device at91_spi # Atmel AT91 Serial Peripheral Interface -#device spibus # SPI bus -#device at45d # Atmel AT45D - -# Pseudo devices. -device loop # Network loopback -device random # Entropy device -device ether # Ethernet support -device md # Memory "disks" -device pty - -# SCSI peripherals -device scbus # SCSI bus (required for ATA/SCSI) -device da # Direct Access (disks) -device cd # CD -device pass # Passthrough device (direct ATA/SCSI access) - -# Serial (COM) ports -device uart # Multi-uart driver - -# USB support -#device ohci # OHCI USB interface -#device usb # USB Bus (required) -#device umass # Disks/Mass storage - Requires scbus and da -#device uhid # "Human Interface Devices" -#device ulpt # Printer -#device udbp # USB Double Bulk Pipe devices - -# USB Ethernet, requires miibus -device miibus -#device aue # ADMtek USB Ethernet -#device axe # ASIX Electronics USB Ethernet -#device cdce # Generic USB over Ethernet -#device cue # CATC USB Ethernet -#device kue # Kawasaki LSI USB Ethernet -#device rue # RealTek RTL8150 USB Ethernet -#device udav # Davicom DM9601E USB - -# USB Wireless -#device rum # Ralink Technology RT2501USB wireless NICs -#device uath # Atheros AR5523 wireless NICs -#device ural # Ralink Technology RT2500USB wireless NICs -#device zyd # ZyDAS zd1211/zd1211b wireless NICs - -# Wireless NIC cards -#device wlan # 802.11 support -#device wlan_wep # 802.11 WEP support -#device wlan_ccmp # 802.11 CCMP support -#device wlan_tkip # 802.11 TKIP support -#device wlan_amrr # AMRR transmit rate control algorithm - -# watchdog -device at91_wdt # Atmel AT91 Watchdog Timer Property changes on: head/sys/arm/conf/SAM9X25EK ___________________________________________________________________ Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Deleted: svn:mime-type ## -1 +0,0 ## -text/plain \ No newline at end of property Index: head/sys/arm/conf/SN9G45 =================================================================== --- head/sys/arm/conf/SN9G45 (revision 328983) +++ head/sys/arm/conf/SN9G45 (nonexistent) @@ -1,132 +0,0 @@ -# Kernel configuration for DesignA Electronics Snapper9G45 System on Module -# -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: -# -# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -#NO_UNIVERSE - -ident SN9G45 - -include "std.arm" -include "../at91/std.sn9g45" - -#To statically compile in device wiring instead of /boot/device.hints -#hints "SN9G45.hints" -makeoptions MODULES_OVERRIDE="" - -options SCHED_4BSD # 4BSD scheduler -options INET # InterNETworking -#options INET6 # IPv6 communications protocols -options TCP_HHOOK # hhook(9) framework for TCP -options FFS # Berkeley Fast Filesystem -#options SOFTUPDATES # Enable FFS soft updates support -#options UFS_ACL # Support for access control lists -#options UFS_DIRHASH # Improve performance on big directories -#options MD_ROOT # MD is a potential root device -#options MD_ROOT_SIZE=4096 # 4MB ram disk -options NFSCL # Network Filesystem Client -#options NFSD # Network Filesystem Server -#options NFSLOCKD # Network Lock Manager -#options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem -#options MSDOSFS # MSDOS Filesystem -#options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) -#options PSEUDOFS # Pseudo-filesystem framework -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options SCSI_DELAY=1000 # Delay (in ms) before probing SCSI -#options KTRACE # ktrace(1) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions - -# NFS root from boopt/dhcp -#options BOOTP -#options BOOTP_NFSROOT -#options BOOTP_COMPAT -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=ate0 - -# alternatively, boot from a MMC/SD memory card -options ROOTDEVNAME=\"ufs:/dev/da0s1\" - -# kernel/memory size reduction -options MUTEX_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -options RWLOCK_NOINLINE - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# Ethernet -device mii # Minimal MII support -device ate # Atmel AT91 Ethernet driver -options AT91_ATE_USE_RMII - -# Pseudo devices. -device loop # Network loopback -device random # Entropy device -device ether # Ethernet support -device md # Memory "disks" - -# SCSI peripherals -device scbus # SCSI bus (required for ATA/SCSI) -device da # Direct Access (disks) -device cd # CD -device pass # Passthrough device (direct ATA/SCSI access) - -# Serial (COM) ports -device uart # Multi-uart driver - -# USB support -device ohci # OHCI USB interface -device usb # USB Bus (required) -device umass # Disks/Mass storage - Requires scbus and da -device uhid # "Human Interface Devices" -#device ulpt # Printer -#device udbp # USB Double Bulk Pipe devices - -# USB Ethernet, requires miibus -device miibus -#device aue # ADMtek USB Ethernet -#device axe # ASIX Electronics USB Ethernet -#device cdce # Generic USB over Ethernet -#device cue # CATC USB Ethernet -#device kue # Kawasaki LSI USB Ethernet -#device rue # RealTek RTL8150 USB Ethernet -device udav # Davicom DM9601E USB - -# USB Wireless -#device rum # Ralink Technology RT2501USB wireless NICs -#device uath # Atheros AR5523 wireless NICs -#device ural # Ralink Technology RT2500USB wireless NICs -#device zyd # ZyDAS zd1211/zd1211b wireless NICs - -# Wireless NIC cards -#device wlan # 802.11 support -#device wlan_wep # 802.11 WEP support -#device wlan_ccmp # 802.11 CCMP support -#device wlan_tkip # 802.11 TKIP support -#device wlan_amrr # AMRR transmit rate control algorithm - -# watchdog -device at91_wdt # Atmel AT91 Watchdog Timer Property changes on: head/sys/arm/conf/SN9G45 ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/KB920X =================================================================== --- head/sys/arm/conf/KB920X (revision 328983) +++ head/sys/arm/conf/KB920X (nonexistent) @@ -1,161 +0,0 @@ -# KB920X -- Custom kernel configuration for the KB9202 (no letter, A and B) -# AT91RM9200 evaluation boards from kwikbyte.com. -# -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: -# -# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -#NO_UNIVERSE - -ident KB920X - -include "std.arm" -include "../at91/std.kb920x" -# The AT91 platform doesn't use /boot/loader, so we have to statically wire -# hints. -hints "KB920X.hints" -makeoptions MODULES_OVERRIDE="" - -options SCHED_4BSD # 4BSD scheduler -options INET # InterNETworking -#options INET6 # IPv6 communications protocols -options TCP_HHOOK # hhook(9) framework for TCP -options FFS # Berkeley Fast Filesystem -#options SOFTUPDATES # Enable FFS soft updates support -#options UFS_ACL # Support for access control lists -#options UFS_DIRHASH # Improve performance on big directories -#options MD_ROOT # MD is a potential root device -#options MD_ROOT_SIZE=4096 # 4MB ram disk -options NFSCL # Network Filesystem Client -#options NFSD # Network Filesystem Server -#options NFSLOCKD # Network Lock Manager -#options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem -#options MSDOSFS # MSDOS Filesystem -#options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) -options PSEUDOFS # Pseudo-filesystem framework -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -#options KTRACE # ktrace(1) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions - -# NFS root from boopt/dhcp -#options BOOTP -#options BOOTP_NFSROOT - -# alternatively, boot from a MMC/SD memory card -options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" - -# kernel/memory size reduction -options MUTEX_NOINLINE -options SX_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -#options NO_SYSCTL_DESCR -options RWLOCK_NOINLINE - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# Ethernet -device mii # Minimal MII support -device ate # Atmel AT91 Ethernet driver -device lxtphy - -# I2C -device at91_twi # Atmel AT91 Two-wire Interface -device iic # I2C generic I/O device driver -device iicbus # I2C bus system -device icee - -# MMC/SD -device at91_mci # Atmel AT91 Multimedia Card Interface -device mmc # MMC/SD bus -device mmcsd # MMC/SD memory card - -# DataFlash -device at91_spi # Atmel AT91 Serial Peripheral Interface -device spibus # SPI bus - -# Pseudo devices. -device loop # Network loopback -device random # Entropy device -device ether # Ethernet support -device md # Memory "disks" - -# SCSI peripherals -device scbus # SCSI bus (required for ATA/SCSI) -device da # Direct Access (disks) -device cd # CD -device pass # Passthrough device (direct ATA/SCSI access) - -# Serial (COM) ports -device uart # Multi-uart driver - -# Wireless NIC cards -device wlan # 802.11 support -device wlan_wep # 802.11 WEP support -device wlan_ccmp # 802.11 CCMP support -device wlan_tkip # 802.11 TKIP support -device wlan_amrr # AMRR transmit rate control algorithm - -# USB support -device ohci # OHCI USB interface -device usb # USB Bus (required) -#device udbp # USB Double Bulk Pipe devices -device uhid # "Human Interface Devices" -device ulpt # Printer -device umass # Disks/Mass storage - Requires scbus and da -device urio # Diamond Rio 500 MP3 player -# USB Serial devices -device uark # Technologies ARK3116 based serial adapters -device ubsa # Belkin F5U103 and compatible serial adapters -device uftdi # For FTDI usb serial adapters -device uipaq # Some WinCE based devices -device uplcom # Prolific PL-2303 serial adapters -device uslcom # SI Labs CP2101/CP2102 serial adapters -device uvisor # Visor and Palm devices -device uvscom # USB serial support for DDI pocket's PHS -# USB Ethernet, requires miibus -device miibus -device aue # ADMtek USB Ethernet -device axe # ASIX Electronics USB Ethernet -device cdce # Generic USB over Ethernet -device cue # CATC USB Ethernet -device kue # Kawasaki LSI USB Ethernet -device rue # RealTek RTL8150 USB Ethernet -device udav # Davicom DM9601E USB -# USB Wireless -device rum # Ralink Technology RT2501USB wireless NICs -device uath # Atheros AR5523 wireless NICs -device ural # Ralink Technology RT2500USB wireless NICs -device zyd # ZyDAS zd1211/zd1211b wireless NICs - -# USB device (gadget) support -device at91_dci # Atmel's usb device -device cdce # emulate an ethernet -device usb_template # Control of the gadget - -options IEEE80211_SUPPORT_MESH - -options AH_SUPPORT_AR5416 Property changes on: head/sys/arm/conf/KB920X ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/HL200 =================================================================== --- head/sys/arm/conf/HL200 (revision 328983) +++ head/sys/arm/conf/HL200 (nonexistent) @@ -1,153 +0,0 @@ -# Kernel configuration for the AT91RM9200 based Hot-e configuration file -# -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: -# -# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -#NO_UNIVERSE - -ident HL200 - -include "std.arm" -include "../at91/std.hl200" - -#To statically compile in device wiring instead of /boot/device.hints -hints "KB920X.hints" -makeoptions MODULES_OVERRIDE="" - -options SCHED_4BSD # 4BSD scheduler -options INET # InterNETworking -#options INET6 # IPv6 communications protocols -options TCP_HHOOK # hhook(9) framework for TCP -options FFS # Berkeley Fast Filesystem -#options SOFTUPDATES # Enable FFS soft updates support -#options UFS_ACL # Support for access control lists -#options UFS_DIRHASH # Improve performance on big directories -#options MD_ROOT # MD is a potential root device -#options MD_ROOT_SIZE=4096 # 4MB ram disk -options NFSCL # Network Filesystem Client -#options NFSD # Network Filesystem Server -#options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem -#options MSDOSFS # MSDOS Filesystem -#options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) -options PSEUDOFS # Pseudo-filesystem framework -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -#options KTRACE # ktrace(1) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions - -options BOOTP -options BOOTP_NFSROOT -options BOOTP_COMPAT -options BOOTP_NFSV3 -options BOOTP_WIRED_TO=ate0 - -# alternatively, boot from a MMC/SD memory card -#options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" - -# kernel/memory size reduction -options MUTEX_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -#options NO_SYSCTL_DESCR -options RWLOCK_NOINLINE - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# Ethernet -device mii # Minimal MII support -device ate # Atmel AT91 Ethernet driver -device lxtphy - -# I2C -device at91_twi # Atmel AT91 Two-wire Interface -device iic # I2C generic I/O device driver -device iicbus # I2C bus system -device icee - -# MMC/SD -device at91_mci # Atmel AT91 Multimedia Card Interface -device mmc # MMC/SD bus -device mmcsd # MMC/SD memory card - -# DataFlash -device at91_spi # Atmel AT91 Serial Peripheral Interface -device spibus # SPI bus - -# Pseudo devices. -device loop # Network loopback -device random # Entropy device -device ether # Ethernet support -device md # Memory "disks" - -# SCSI peripherals -device scbus # SCSI bus (required for ATA/SCSI) -device da # Direct Access (disks) -device cd # CD -device pass # Passthrough device (direct ATA/SCSI access) - -# Serial (COM) ports -device uart # Multi-uart driver - -# USB support -device ohci # OHCI USB interface -device usb # USB Bus (required) -#device udbp # USB Double Bulk Pipe devices -device uhid # "Human Interface Devices" -device ulpt # Printer -device umass # Disks/Mass storage - Requires scbus and da -device urio # Diamond Rio 500 MP3 player -# USB Serial devices -device uark # Technologies ARK3116 based serial adapters -device ubsa # Belkin F5U103 and compatible serial adapters -#device ubser # not yet converted. -device uftdi # For FTDI usb serial adapters -device uipaq # Some WinCE based devices -device uplcom # Prolific PL-2303 serial adapters -device uslcom # SI Labs CP2101/CP2102 serial adapters -device uvisor # Visor and Palm devices -device uvscom # USB serial support for DDI pocket's PHS -# USB Ethernet, requires miibus -device miibus -device aue # ADMtek USB Ethernet -device axe # ASIX Electronics USB Ethernet -device cdce # Generic USB over Ethernet -device cue # CATC USB Ethernet -device kue # Kawasaki LSI USB Ethernet -device rue # RealTek RTL8150 USB Ethernet -device udav # Davicom DM9601E USB -# USB Wireless -device rum # Ralink Technology RT2501USB wireless NICs -device uath # Atheros AR5523 wireless NICs -device ural # Ralink Technology RT2500USB wireless NICs -device zyd # ZyDAS zd1211/zd1211b wireless NICs - -# Wireless NIC cards -device wlan # 802.11 support -device wlan_wep # 802.11 WEP support -device wlan_ccmp # 802.11 CCMP support -device wlan_tkip # 802.11 TKIP support -device wlan_amrr # AMRR transmit rate control algorithm Property changes on: head/sys/arm/conf/HL200 ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/HL201 =================================================================== --- head/sys/arm/conf/HL201 (revision 328983) +++ head/sys/arm/conf/HL201 (nonexistent) @@ -1,152 +0,0 @@ -# Kernel configuration for the AT91SAM9G20 based Hot-e configuration file -# -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: -# -# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -#NO_UNIVERSE - -ident HL201 - -include "std.arm" -include "../at91/std.hl201" - -makeoptions MODULES_OVERRIDE="" - -options SCHED_4BSD # 4BSD scheduler -options INET # InterNETworking -#options INET6 # IPv6 communications protocols -options TCP_HHOOK # hhook(9) framework for TCP -options FFS # Berkeley Fast Filesystem -#options SOFTUPDATES # Enable FFS soft updates support -#options UFS_ACL # Support for access control lists -#options UFS_DIRHASH # Improve performance on big directories -#options MD_ROOT # MD is a potential root device -#options MD_ROOT_SIZE=4096 # 4MB ram disk -options NANDFS # NAND file system -options NFSCL # Network Filesystem Client -#options NFSD # Network Filesystem Server -#options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem -#options MSDOSFS # MSDOS Filesystem -#options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) -options PSEUDOFS # Pseudo-filesystem framework -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -#options KTRACE # ktrace(1) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions - -# NFS root from boopt/dhcp -#options BOOTP -#options BOOTP_NFSROOT -#options BOOTP_COMPAT -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=macb0 - -options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" - -# kernel/memory size reduction -options MUTEX_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -options RWLOCK_NOINLINE - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# Ethernet -device mii # Minimal MII support -device macb # Atmel AT91 Ethernet driver -device lxtphy - -# I2C -device at91_twi # Atmel AT91 Two-wire Interface -device iic # I2C generic I/O device driver -device iicbus # I2C bus system - -# DataFlash -device at91_spi # Atmel AT91 Serial Peripheral Interface -device spibus # SPI bus -device at45d # Atmel AT45D - -# Pseudo devices. -device loop # Network loopback -device random # Entropy device -device ether # Ethernet support -device md # Memory "disks" - -# SCSI peripherals -device scbus # SCSI bus (required for ATA/SCSI) -device da # Direct Access (disks) -device cd # CD -device pass # Passthrough device (direct ATA/SCSI access) - -# Serial (COM) ports -device uart # Multi-uart driver - -# USB support -device ohci # OHCI USB interface -device usb # USB Bus (required) -#device udbp # USB Double Bulk Pipe devices -device uhid # "Human Interface Devices" -#device ulpt # Printer -device umass # Disks/Mass storage - Requires scbus and da - -# USB Ethernet, requires miibus -device miibus -#device aue # ADMtek USB Ethernet -#device axe # ASIX Electronics USB Ethernet -#device cdce # Generic USB over Ethernet -#device cue # CATC USB Ethernet -#device kue # Kawasaki LSI USB Ethernet -#device rue # RealTek RTL8150 USB Ethernet -#device udav # Davicom DM9601E USB -# USB Wireless -#device rum # Ralink Technology RT2501USB wireless NICs -#device uath # Atheros AR5523 wireless NICs -#device ural # Ralink Technology RT2500USB wireless NICs -#device zyd # ZyDAS zd1211/zd1211b wireless NICs - -# Wireless NIC cards -#device wlan # 802.11 support -#device wlan_wep # 802.11 WEP support -#device wlan_ccmp # 802.11 CCMP support -#device wlan_tkip # 802.11 TKIP support -#device wlan_amrr # AMRR transmit rate control algorithm -options ROOTDEVNAME=\"ufs:da0s1a\" - -# watchdog -device at91_wdt # Atmel AT91 Watchdog Timer - -# NAND Flash - my board as 128MB Samsung part, YMMV. -device nand # NAND interface on CS3 - -# Coming soon, but not yet -options FDT -options FDT_DTB_STATIC -makeoptions FDT_DTS_FILE=hl201.dts - -options EARLY_PRINTF -options SOCDEV_PA=0xfc000000 -options SOCDEV_VA=0xdc000000 Property changes on: head/sys/arm/conf/HL201 ___________________________________________________________________ Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Deleted: svn:mime-type ## -1 +0,0 ## -text/plain \ No newline at end of property Index: head/sys/arm/conf/ETHERNUT5 =================================================================== --- head/sys/arm/conf/ETHERNUT5 (revision 328983) +++ head/sys/arm/conf/ETHERNUT5 (nonexistent) @@ -1,143 +0,0 @@ -# Kernel configuration for Ethernut 5 boards -# -# For more information on this file, please read the config(5) manual page, -# and/or the handbook section on Kernel Configuration Files: -# -# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -#NO_UNIVERSE - -ident ETHERNUT5 - -include "std.arm" -include "../at91/std.ethernut5" - -# To statically compile in device wiring instead of /boot/device.hints -hints "ETHERNUT5.hints" - -options SCHED_4BSD # 4BSD scheduler -#options PREEMPTION # Enable kernel thread preemption -options INET # InterNETworking -#options INET6 # IPv6 communications protocols -options TCP_HHOOK # hhook(9) framework for TCP -#options SCTP # Stream Control Transmission Protocol -options FFS # Berkeley Fast Filesystem -options SOFTUPDATES # Enable FFS soft updates support -#options UFS_ACL # Support for access control lists -options UFS_DIRHASH # Improve performance on big directories -#options UFS_GJOURNAL # Enable gjournal-based UFS journaling -#options MD_ROOT # MD is a potential root device -options NFSCL # Network Filesystem Client -#options NFSD # Network Filesystem Server -options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem -#options MSDOSFS # MSDOS Filesystem -#options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) -#options PSEUDOFS # Pseudo-filesystem framework -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -#options GEOM_PART_GPT # GUID Partition Tables. -#options GEOM_LABEL # Provides labelization -options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -options KTRACE # ktrace(1) support -#options STACK # stack(9) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions -options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. -#options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) -#options AUDIT # Security event auditing -#options CAPABILITY_MODE # Capsicum capability mode -#options CAPABILITIES # Capsicum capabilities -#options MAC # TrustedBSD MAC Framework -#options INCLUDE_CONFIG_FILE # Include this file in kernel - -# NFS root from boopt/dhcp -options BOOTP -options BOOTP_NFSROOT -options BOOTP_COMPAT -options BOOTP_NFSV3 -options BOOTP_WIRED_TO=ate0 - -# alternatively, boot from a MMC/SD memory card -#options ROOTDEVNAME=\"ufs:/dev/mmcsd0a\" - -# kernel/memory size reduction -options MUTEX_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -options NO_SYSCTL_DESCR -options RWLOCK_NOINLINE - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# Ethernet -device mii # Minimal MII support -device ate # Atmel AT91 Ethernet driver - -# I2C -device at91_twi # Atmel AT91 Two-wire Interface -device iic # I2C generic I/O device driver -device iicbus # I2C bus system -device pcf8563 # NXP PCF8563 clock/calendar - -# MMC/SD -device at91_mci # Atmel AT91 Multimedia Card Interface -options AT91_MCI_HAS_4WIRE -device mmc # MMC/SD bus -device mmcsd # MMC/SD memory card - -# DataFlash -device at91_spi # Atmel AT91 Serial Peripheral Interface -device spibus # SPI bus -device at45d # Atmel AT45D -device geom_map # GEOM partition mapping - -# Pseudo devices. -device loop # Network loopback -device random # Entropy device -device ether # Ethernet support -#device vlan # 802.1Q VLAN support -#device tun # Packet tunnel. -#device md # Memory "disks" -#device gif # IPv6 and IPv4 tunneling -#device firmware # firmware assist module - -# SCSI peripherals -#device scbus # SCSI bus (required for ATA/SCSI) -#device ch # SCSI media changers -#device da # Direct Access (disks) -#device sa # Sequential Access (tape etc) -#device cd # CD -#device pass # Passthrough device (direct ATA/SCSI access) -#device ses # Enclosure Services (SES and SAF-TE) -#device ctl # CAM Target Layer - -# Serial (COM) ports -device uart # Multi-uart driver - -# USB support -device ohci # OHCI USB interface -device usb # USB Bus (required) -#device umass # Disks/Mass storage - Requires scbus and da - -# watchdog -device at91_wdt # Atmel AT91 Watchdog Timer Property changes on: head/sys/arm/conf/ETHERNUT5 ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/QILA9G20 =================================================================== --- head/sys/arm/conf/QILA9G20 (revision 328983) +++ head/sys/arm/conf/QILA9G20 (nonexistent) @@ -1,154 +0,0 @@ -# Kernel configuration for Calao Syatems QIL-A9G20 development card -# http://www.calao-systems.com -# -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: -# -# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -#NO_UNIVERSE - -ident QILA9G20 - -include "std.arm" -include "../at91/std.qila9g20" - -#To statically compile in device wiring instead of /boot/device.hints -hints "QILA9G20.hints" -makeoptions MODULES_OVERRIDE="" - -options SCHED_4BSD # 4BSD scheduler -options INET # InterNETworking -#options INET6 # IPv6 communications protocols -options TCP_HHOOK # hhook(9) framework for TCP -options FFS # Berkeley Fast Filesystem -#options SOFTUPDATES # Enable FFS soft updates support -#options UFS_ACL # Support for access control lists -#options UFS_DIRHASH # Improve performance on big directories -#options MD_ROOT # MD is a potential root device -#options MD_ROOT_SIZE=4096 # 4MB ram disk -options NFSCL # Network Filesystem Client -#options NFSD # Network Filesystem Server -#options NFSLOCKD # Network Lock Manager -#options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem -#options MSDOSFS # MSDOS Filesystem -#options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) -#options PSEUDOFS # Pseudo-filesystem framework -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -#options KTRACE # ktrace(1) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions - -# NFS root from boopt/dhcp -#options BOOTP -#options BOOTP_NFSROOT -#options BOOTP_COMPAT -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=ate0 - -# alternatively, boot from a MMC/SD memory card -options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" - -# kernel/memory size reduction -options MUTEX_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -options RWLOCK_NOINLINE - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# Ethernet -device mii # Minimal MII support -device ate # Atmel AT91 Ethernet driver -options AT91_ATE_USE_RMII - -# I2C -device at91_twi # Atmel AT91 Two-wire Interface -device iic # I2C generic I/O device driver -device iicbus # I2C bus system -device icee - -# NOTE: SPI DataFlash and mci/mmc/mmcsd have hardware -# confilict on this card. Use one or the other. -# see board_sam9g20ek.c - -# MMC/SD -device at91_mci # Atmel AT91 Multimedia Card Interface -options AT91_MCI_HAS_4WIRE -device mmc # MMC/SD bus -device mmcsd # MMC/SD memory card - -# DataFlash -#device at91_spi # Atmel AT91 Serial Peripheral Interface -#device spibus # SPI bus -#device at45d # Atmel AT45D - -# Pseudo devices. -device loop # Network loopback -device random # Entropy device -device ether # Ethernet support -device md # Memory "disks" - -# SCSI peripherals -device scbus # SCSI bus (required for ATA/SCSI) -device da # Direct Access (disks) -device cd # CD -device pass # Passthrough device (direct ATA/SCSI access) - -# Serial (COM) ports -device uart # Multi-uart driver - -# USB support -device ohci # OHCI USB interface -device usb # USB Bus (required) -device umass # Disks/Mass storage - Requires scbus and da -device uhid # "Human Interface Devices" -#device ulpt # Printer -#device udbp # USB Double Bulk Pipe devices - -# USB Ethernet, requires miibus -device miibus -#device aue # ADMtek USB Ethernet -#device axe # ASIX Electronics USB Ethernet -#device cdce # Generic USB over Ethernet -#device cue # CATC USB Ethernet -#device kue # Kawasaki LSI USB Ethernet -#device rue # RealTek RTL8150 USB Ethernet -device udav # Davicom DM9601E USB - -# USB Wireless -#device rum # Ralink Technology RT2501USB wireless NICs -#device uath # Atheros AR5523 wireless NICs -#device ural # Ralink Technology RT2500USB wireless NICs -#device zyd # ZyDAS zd1211/zd1211b wireless NICs - -# Wireless NIC cards -#device wlan # 802.11 support -#device wlan_wep # 802.11 WEP support -#device wlan_ccmp # 802.11 CCMP support -#device wlan_tkip # 802.11 TKIP support -#device wlan_amrr # AMRR transmit rate control algorithm - -# watchdog -device at91_wdt # Atmel AT91 Watchdog Timer Property changes on: head/sys/arm/conf/QILA9G20 ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Deleted: svn:mime-type ## -1 +0,0 ## -text/plain \ No newline at end of property Deleted: vn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Index: head/sys/arm/conf/EB9200.hints =================================================================== --- head/sys/arm/conf/EB9200.hints (revision 328983) +++ head/sys/arm/conf/EB9200.hints (nonexistent) @@ -1,6 +0,0 @@ -# $FreeBSD$ - -# should likely list CF here since its address isn't fixed. -# but since it is at an external chip select, do we use that or the address -# to configure it as its bus address? Need to fix arbitrary bus mapping -# before I can list it here. Property changes on: head/sys/arm/conf/EB9200.hints ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/KB920X.hints =================================================================== --- head/sys/arm/conf/KB920X.hints (revision 328983) +++ head/sys/arm/conf/KB920X.hints (nonexistent) @@ -1,16 +0,0 @@ -# $FreeBSD$ -# -# Kwikbyte KB9202A description (will also work for 9202 and might work with -# a boot loader tweak on the KB9202B). For the moment, all we list is the -# eeprom. The temperature sensor isn't listed. -# - -# boot eeprom at 'default' address of 0xa0 -hint.icee.0.at="iicbus0" -hint.icee.0.addr=0xa0 -hint.icee.0.type=16 -hint.icee.0.size=16384 -hint.icee.0.rd_sz=256 -hint.icee.0.wr_sz=16 - -# XXX add temperature sensor Property changes on: head/sys/arm/conf/KB920X.hints ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/QILA9G20.hints =================================================================== --- head/sys/arm/conf/QILA9G20.hints (revision 328983) +++ head/sys/arm/conf/QILA9G20.hints (nonexistent) @@ -1,9 +0,0 @@ -# $FreeBSD$ -# Kernel configuration hits for Calao Syatems QIL-A9G20 development card -# http://www.calao-systems.com - -# STMicroelctrtronics M41T94 Real-Time Clock -# on SPI0 NPCS0 - -# STMicroelctrtronics M95640 8k x 8 EEPROM -# on SPI0 NPCS1 Property changes on: head/sys/arm/conf/QILA9G20.hints ___________________________________________________________________ Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Deleted: svn:mime-type ## -1 +0,0 ## -text/plain \ No newline at end of property Index: head/sys/arm/conf/SAM9260EK.hints =================================================================== --- head/sys/arm/conf/SAM9260EK.hints (revision 328983) +++ head/sys/arm/conf/SAM9260EK.hints (nonexistent) @@ -1,48 +0,0 @@ -# $FreeBSD$ - -# Atmel AT45DB21D -hint.at45d.0.at="spibus0" -hint.at45d.0.cs=1 -# Area 0: 00000000 to 000041FF (RO) Bootstrap -# Area 1: 00004200 to 000083FF Environment -# Area 2: 00008400 to 00041FFF (RO) U-Boot -# Area 3: 00042000 to 00251FFF Kernel -# Area 4: 00252000 to 0083FFFF FS -# bootstrap -hint.map.0.at="flash/spi0" -hint.map.0.start=0x00000000 -hint.map.0.end=0x000041ff -hint.map.0.name="bootstrap" -hint.map.0.readonly=1 -# uboot environment -hint.map.1.at="flash/spi0" -hint.map.1.start=0x00004200 -hint.map.1.end=0x00083ff -hint.map.1.name="uboot-env" -#hint.map.1.readonly=1 -# uboot -hint.map.2.at="flash/spi0" -hint.map.2.start=0x00008400 -hint.map.2.end=0x00041fff -hint.map.2.name="uboot" -hint.map.2.readonly=1 -# kernel -hint.map.3.at="flash/spi0" -hint.map.3.start=0x00042000 -hint.map.3.end=0x00251fff -hint.map.3.name="fs" -#hint.map.3.readonly=1 -# fs -hint.map.4.at="flash/spi0" -hint.map.4.start=0x00252000 -hint.map.4.end=0x0083ffff -hint.map.4.name="fs" -#hint.map.4.readonly=1 - -# EEPROM at24c512 - 512kbit 65,536x8 memory -hint.icee.0.at="iicbus0" -hint.icee.0.addr=0xa0 -hint.icee.0.type=16 -hint.icee.0.size=65536 -hint.icee.0.rd_sz=128 -hint.icee.0.wr_sz=128 Property changes on: head/sys/arm/conf/SAM9260EK.hints ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/HL201.hints =================================================================== --- head/sys/arm/conf/HL201.hints (revision 328983) +++ head/sys/arm/conf/HL201.hints (nonexistent) @@ -1,48 +0,0 @@ -# $FreeBSD$ - -# Atmel AT45DB21D -hint.at45d.0.at="spibus0" -hint.at45d.0.cs=0 -# Area 0: 00000000 to 000041FF (RO) Bootstrap -# Area 1: 00004200 to 000083FF Environment -# Area 2: 00008400 to 00041FFF (RO) U-Boot -# Area 3: 00042000 to 00251FFF Kernel -# Area 4: 00252000 to 0083FFFF FS -# bootstrap -hint.map.0.at="flash/spi0" -hint.map.0.start=0x00000000 -hint.map.0.end=0x000041ff -hint.map.0.name="bootstrap" -hint.map.0.readonly=1 -# uboot environment -hint.map.1.at="flash/spi0" -hint.map.1.start=0x00004200 -hint.map.1.end=0x00083ff -hint.map.1.name="uboot-env" -#hint.map.1.readonly=1 -# uboot -hint.map.2.at="flash/spi0" -hint.map.2.start=0x00008400 -hint.map.2.end=0x00041fff -hint.map.2.name="uboot" -hint.map.2.readonly=1 -# kernel -hint.map.3.at="flash/spi0" -hint.map.3.start=0x00042000 -hint.map.3.end=0x00251fff -hint.map.3.name="fs" -#hint.map.3.readonly=1 -# fs -hint.map.4.at="flash/spi0" -hint.map.4.start=0x00252000 -hint.map.4.end=0x0083ffff -hint.map.4.name="fs" -#hint.map.4.readonly=1 - -# EEPROM at24c512 - 512kbit 65,536x8 memory -hint.icee.0.at="iicbus0" -hint.icee.0.addr=0xa0 -hint.icee.0.type=16 -hint.icee.0.size=65536 -hint.icee.0.rd_sz=128 -hint.icee.0.wr_sz=128 Property changes on: head/sys/arm/conf/HL201.hints ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/ETHERNUT5.hints =================================================================== --- head/sys/arm/conf/ETHERNUT5.hints (revision 328983) +++ head/sys/arm/conf/ETHERNUT5.hints (nonexistent) @@ -1,51 +0,0 @@ -# $FreeBSD$ - -# Atmel AT45DB21D -hint.at45d.0.at="spibus0" -hint.at45d.0.cs=0 -# user 132 kbytes -hint.map.0.at="flash/spi0" -hint.map.0.start=0x00000000 -hint.map.0.end=0x00020fff -hint.map.0.name="user" -hint.map.0.readonly=1 -# setup 132 kbytes -hint.map.1.at="flash/spi0" -hint.map.1.start=0x00021000 -hint.map.1.end=0x00041fff -hint.map.1.name="setup" -hint.map.1.readonly=1 -# uboot 528 kbytes -hint.map.2.at="flash/spi0" -hint.map.2.start=0x00042000 -hint.map.2.end=0x000c5fff -hint.map.2.name="uboot" -hint.map.2.readonly=1 -# kernel 2640 kbytes -hint.map.3.at="flash/spi0" -hint.map.3.start=0x000c6000 -hint.map.3.end=0x00359fff -hint.map.3.name="kernel" -#hint.map.3.readonly=1 -# nutos 528 kbytes -hint.map.4.at="flash/spi0" -hint.map.4.start=0x0035a000 -hint.map.4.end=0x003ddfff -hint.map.4.name="nutos" -hint.map.4.readonly=1 -# env 132 kbytes -hint.map.5.at="flash/spi0" -hint.map.5.start=0x003de000 -hint.map.5.end=0x003fefff -hint.map.5.name="env" -hint.map.5.readonly=1 -# env 132 kbytes -hint.map.6.at="flash/spi0" -hint.map.6.start=0x003ff000 -hint.map.6.end=0x0041ffff -hint.map.6.name="nutoscfg" -hint.map.6.readonly=1 - -# NXP PCF8563 clock/calendar -hint.pcf8563_rtc.0.at="iicbus0" -hint.pcf8563_rtc.0.addr=0xa2 Property changes on: head/sys/arm/conf/ETHERNUT5.hints ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/BWCT =================================================================== --- head/sys/arm/conf/BWCT (revision 328983) +++ head/sys/arm/conf/BWCT (nonexistent) @@ -1,118 +0,0 @@ -# BWCT -- Custom kernel configuration for the AT91RM9200 boards from bwct.de. -# -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: -# -# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -#NO_UNIVERSE - -ident BWCT - -include "std.arm" -options VERBOSE_INIT_ARM - -include "../at91/std.bwct" - -#To statically compile in device wiring instead of /boot/device.hints -hints "BWCT.hints" -makeoptions MODULES_OVERRIDE="" - -options SCHED_4BSD # 4BSD scheduler -options INET # InterNETworking -#options INET6 # IPv6 communications protocols -options TCP_HHOOK # hhook(9) framework for TCP -options FFS # Berkeley Fast Filesystem -options SOFTUPDATES # Enable FFS soft updates support -#options UFS_ACL # Support for access control lists -#options UFS_DIRHASH # Improve performance on big directories -#options MD_ROOT # MD is a potential root device -#options MD_ROOT_SIZE=4096 # 4MB ram disk -options NFSCL # Network Filesystem Client -#options NFSD # Network Filesystem Server -#options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem -#options MSDOSFS # MSDOS Filesystem -#options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) -options PSEUDOFS # Pseudo-filesystem framework -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -#options KTRACE # ktrace(1) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING #POSIX P1003_1B real-time extensions - -options BOOTP -options BOOTP_NFSROOT - -#options ROOTDEVNAME=\"ufs:md0\" -#options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" - -# kernel/memory size reduction -options MUTEX_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -#options NO_SYSCTL_DESCR -options RWLOCK_NOINLINE - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# Ethernet -device mii # Minimal MII support -device ate # Atmel AT91 Ethernet driver -device rlswitch - -# I2C -device at91_twi # Atmel AT91 Two-wire Interface -device iic # I2C generic I/O device driver -device iicbus # I2C bus system -device ds1672 # DS1672 on I2C bus -#device iicsmb # smb over i2c bridge -#device smbus # Bus support, required for smb below. -#device smb - -# MMC/SD -device at91_mci # Atmel AT91 Multimedia Card Interface -device mmc # MMC/SD bus -device mmcsd # MMC/SD memory card - -# DataFlash -device at91_spi # Atmel AT91 Serial Peripheral Interface -device spibus # SPI bus -#device at45d # Atmel AT45D - -# Pseudo devices. -device loop # Network loopback -device random # Entropy device -device ether # Ethernet support -device vlan # 802.1Q VLAN support -device md # Memory "disks" - -# Serial (COM) ports -device uart # Multi-uart driver - -# USB support -#device ohci -#device usb -#device umass # Disks/Mass storage - Requires scbus and da - -device at91_ssc Property changes on: head/sys/arm/conf/BWCT ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/BWCT.hints =================================================================== --- head/sys/arm/conf/BWCT.hints (revision 328983) +++ head/sys/arm/conf/BWCT.hints (nonexistent) @@ -1,13 +0,0 @@ -# $FreeBSD$ - -# Dallas Semiconductor DS1672 RTC sitting on the I2C bus -hint.ds1672_rtc.0.at="iicbus0" -hint.ds1672_rtc.0.addr=0xd0 - -# National Semiconductor LM75 temperature sensor sitting on the I2C bus -hint.lm75.0.at="iicbus0" -hint.lm75.0.addr=0x9e - -# Atmel SPIflash sitting on the spibus -hint.at45d.0.at="spibus0" -hint.at45d.0.addr=0x00 Property changes on: head/sys/arm/conf/BWCT.hints ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/SAM9260EK =================================================================== --- head/sys/arm/conf/SAM9260EK (revision 328983) +++ head/sys/arm/conf/SAM9260EK (nonexistent) @@ -1,185 +0,0 @@ -# Kernel configuration for Atmel SAM9260-EK eval board -# -# For more information on this file, please read the config(5) manual page, -# and/or the handbook section on Kernel Configuration Files: -# -# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD$ - -#NO_UNIVERSE - -ident SAM9260EK - -include "std.arm" -include "../at91/std.sam9260ek" - -# Coming soon, but not yet -#options FDT -#options FDT_DTB_STATIC -#makeoptions FDT_DTS_FILE=sam9260ek.dts - -options EARLY_PRINTF -options SOCDEV_PA=0xfc000000 -options SOCDEV_VA=0xdc000000 - -# To statically compile in device wiring instead of /boot/device.hints -hints "SAM9260EK.hints" - -makeoptions MODULES_OVERRIDE="" - -options SCHED_4BSD # 4BSD scheduler -#options PREEMPTION # Enable kernel thread preemption -options INET # InterNETworking -#options INET6 # IPv6 communications protocols -options TCP_HHOOK # hhook(9) framework for TCP -#options SCTP # Stream Control Transmission Protocol -options FFS # Berkeley Fast Filesystem -options SOFTUPDATES # Enable FFS soft updates support -#options UFS_ACL # Support for access control lists -options UFS_DIRHASH # Improve performance on big directories -#options UFS_GJOURNAL # Enable gjournal-based UFS journaling -#options MD_ROOT # MD is a potential root device -options NANDFS # NAND file system -options NFSCL # Network Filesystem Client -#options NFSD # Network Filesystem Server -options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem -#options MSDOSFS # MSDOS Filesystem -#options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) -#options PSEUDOFS # Pseudo-filesystem framework -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -#options GEOM_PART_GPT # GUID Partition Tables. -#options GEOM_LABEL # Provides labelization -options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -options KTRACE # ktrace(1) support -#options STACK # stack(9) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions -options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. -#options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) -#options AUDIT # Security event auditing -#options CAPABILITY_MODE # Capsicum capability mode -#options CAPABILITIES # Capsicum capabilities -#options MAC # TrustedBSD MAC Framework -#options INCLUDE_CONFIG_FILE # Include this file in kernel - -# NFS root from boopt/dhcp -#options BOOTP -#options BOOTP_NFSROOT -#options BOOTP_COMPAT -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=macb0 - -# s3 because s1 is reserved for the DOS parittions sometimes needed to -# boot off SD cards on the G20 and newer chips. s2 is reserved for -# nanobsd's config partition. s3 and s4 are for the ping-pong upgrade -# path. 9260 doesn't boot off SD, but let's keep things sane. -options ROOTDEVNAME=\"ufs:/dev/mmcsd0s3a\" - -# Alternatively, boot from a USB card. -#options ROOTDEVNAME=\"ufs:/dev/da0s1a\" - -# kernel/memory size reduction -options MUTEX_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -options NO_SYSCTL_DESCR -options RWLOCK_NOINLINE - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# Ethernet -device mii # Minimal MII support -device macb # Atmel AT91 Ethernet driver - -# I2C -device at91_twi # Atmel AT91 Two-wire Interface -device iic # I2C generic I/O device driver -device iicbus # I2C bus system -device icee # I2C eeprom - -# MMC/SD -# See comment for DataFlash below -device at91_mci # Atmel AT91 Multimedia Card Interface -options AT91_MCI_HAS_4WIRE # 4 wires -options AT91_MCI_SLOT_B # Wired to slot B -device mmc # MMC/SD bus -device mmcsd # MMC/SD memory card - -# DataFlash -# The DataFlash and MMC card are wired together, so we must pick one or the -# other. This is due to pin mux, and also due to the design of the -# SAM9260EK board. SLOT A wouldn't have this issue. -#device at91_spi # Atmel AT91 Serial Peripheral Interface -#device spibus # SPI bus -#device at45d # Atmel AT45D -#device geom_map # GEOM partition mapping - -# Pseudo devices. -device loop # Network loopback -device random # Entropy device -device ether # Ethernet support -#device vlan # 802.1Q VLAN support -#device tun # Packet tunnel. -device md # Memory "disks" -#device gif # IPv6 and IPv4 tunneling -#device firmware # firmware assist module - -# SCSI peripherals -#device scbus # SCSI bus (required for ATA/SCSI) -#device ch # SCSI media changers -#device da # Direct Access (disks) -#device sa # Sequential Access (tape etc) -#device cd # CD/DVD -#device pass # Passthrough device (direct ATA/SCSI access) -#device ses # Enclosure Services (SES and SAF-TE) -#device ctl # CAM Target Layer - -# Serial (COM) ports -device uart # Multi-uart driver - -# USB support -#device ohci # OHCI USB interface -#device usb # USB Bus (required) -#device umass # Disks/Mass storage - Requires scbus and da - -# watchdog -device at91_wdt # Atmel AT91 Watchdog Timer - -# NAND Flash - Reference design has Samsung 256MB but others possible -device nand # NAND interface on CS3 - -options NSFBUFS=128 -maxusers 32 - -# Limit IO size -options NBUF=128 - -# Don't include the SCSI/CAM strings in the default build -options SCSI_NO_SENSE_STRINGS -options SCSI_NO_OP_STRINGS - -# .. And no sysctl strings -options NO_SYSCTL_DESCR - -# For small memory footprints -options VM_KMEM_SIZE_SCALE=1 Property changes on: head/sys/arm/conf/SAM9260EK ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/SAM9X25EK.hints =================================================================== --- head/sys/arm/conf/SAM9X25EK.hints (revision 328983) +++ head/sys/arm/conf/SAM9X25EK.hints (nonexistent) @@ -1,10 +0,0 @@ -# $FreeBSD$ -# - -# EEPROM -hint.icee.0.at="iicbus0" -hint.icee.0.addr=0xa0 -hint.icee.0.type=16 -hint.icee.0.size=65536 -hint.icee.0.rd_sz=256 -hint.icee.0.wr_sz=256 Property changes on: head/sys/arm/conf/SAM9X25EK.hints ___________________________________________________________________ Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Deleted: svn:mime-type ## -1 +0,0 ## -text/plain \ No newline at end of property