Index: head/sys/x86/x86/identcpu.c =================================================================== --- head/sys/x86/x86/identcpu.c (revision 328623) +++ head/sys/x86/x86/identcpu.c (revision 328624) @@ -1,2487 +1,2488 @@ /*- * Copyright (c) 1992 Terrence R. Lambert. * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. * Copyright (c) 1997 KATO Takenori. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Id: machdep.c,v 1.193 1996/06/18 01:22:04 bde Exp */ #include __FBSDID("$FreeBSD$"); #include "opt_cpu.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __i386__ #define IDENTBLUE_CYRIX486 0 #define IDENTBLUE_IBMCPU 1 #define IDENTBLUE_CYRIXM2 2 static void identifycyrix(void); static void print_transmeta_info(void); #endif static u_int find_cpu_vendor_id(void); static void print_AMD_info(void); static void print_INTEL_info(void); static void print_INTEL_TLB(u_int data); static void print_hypervisor_info(void); static void print_svm_info(void); static void print_via_padlock_info(void); static void print_vmx_info(void); #ifdef __i386__ int cpu; /* Are we 386, 386sx, 486, etc? */ int cpu_class; #endif u_int cpu_feature; /* Feature flags */ u_int cpu_feature2; /* Feature flags */ u_int amd_feature; /* AMD feature flags */ u_int amd_feature2; /* AMD feature flags */ u_int amd_rascap; /* AMD RAS capabilities */ u_int amd_pminfo; /* AMD advanced power management info */ u_int amd_extended_feature_extensions; u_int via_feature_rng; /* VIA RNG features */ u_int via_feature_xcrypt; /* VIA ACE features */ u_int cpu_high; /* Highest arg to CPUID */ u_int cpu_exthigh; /* Highest arg to extended CPUID */ u_int cpu_id; /* Stepping ID */ u_int cpu_procinfo; /* HyperThreading Info / Brand Index / CLFUSH */ u_int cpu_procinfo2; /* Multicore info */ char cpu_vendor[20]; /* CPU Origin code */ u_int cpu_vendor_id; /* CPU vendor ID */ u_int cpu_fxsr; /* SSE enabled */ u_int cpu_mxcsr_mask; /* Valid bits in mxcsr */ u_int cpu_clflush_line_size = 32; u_int cpu_stdext_feature; /* %ebx */ u_int cpu_stdext_feature2; /* %ecx */ u_int cpu_stdext_feature3; /* %edx */ uint64_t cpu_ia32_arch_caps; u_int cpu_max_ext_state_size; u_int cpu_mon_mwait_flags; /* MONITOR/MWAIT flags (CPUID.05H.ECX) */ u_int cpu_mon_min_size; /* MONITOR minimum range size, bytes */ u_int cpu_mon_max_size; /* MONITOR minimum range size, bytes */ u_int cpu_maxphyaddr; /* Max phys addr width in bits */ char machine[] = MACHINE; SYSCTL_UINT(_hw, OID_AUTO, via_feature_rng, CTLFLAG_RD, &via_feature_rng, 0, "VIA RNG feature available in CPU"); SYSCTL_UINT(_hw, OID_AUTO, via_feature_xcrypt, CTLFLAG_RD, &via_feature_xcrypt, 0, "VIA xcrypt feature available in CPU"); #ifdef __amd64__ #ifdef SCTL_MASK32 extern int adaptive_machine_arch; #endif static int sysctl_hw_machine(SYSCTL_HANDLER_ARGS) { #ifdef SCTL_MASK32 static const char machine32[] = "i386"; #endif int error; #ifdef SCTL_MASK32 if ((req->flags & SCTL_MASK32) != 0 && adaptive_machine_arch) error = SYSCTL_OUT(req, machine32, sizeof(machine32)); else #endif error = SYSCTL_OUT(req, machine, sizeof(machine)); return (error); } SYSCTL_PROC(_hw, HW_MACHINE, machine, CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, sysctl_hw_machine, "A", "Machine class"); #else SYSCTL_STRING(_hw, HW_MACHINE, machine, CTLFLAG_RD, machine, 0, "Machine class"); #endif static char cpu_model[128]; SYSCTL_STRING(_hw, HW_MODEL, model, CTLFLAG_RD | CTLFLAG_MPSAFE, cpu_model, 0, "Machine model"); static int hw_clockrate; SYSCTL_INT(_hw, OID_AUTO, clockrate, CTLFLAG_RD, &hw_clockrate, 0, "CPU instruction clock rate"); u_int hv_high; char hv_vendor[16]; SYSCTL_STRING(_hw, OID_AUTO, hv_vendor, CTLFLAG_RD | CTLFLAG_MPSAFE, hv_vendor, 0, "Hypervisor vendor"); static eventhandler_tag tsc_post_tag; static char cpu_brand[48]; #ifdef __i386__ #define MAX_BRAND_INDEX 8 static const char *cpu_brandtable[MAX_BRAND_INDEX + 1] = { NULL, /* No brand */ "Intel Celeron", "Intel Pentium III", "Intel Pentium III Xeon", NULL, NULL, NULL, NULL, "Intel Pentium 4" }; static struct { char *cpu_name; int cpu_class; } cpus[] = { { "Intel 80286", CPUCLASS_286 }, /* CPU_286 */ { "i386SX", CPUCLASS_386 }, /* CPU_386SX */ { "i386DX", CPUCLASS_386 }, /* CPU_386 */ { "i486SX", CPUCLASS_486 }, /* CPU_486SX */ { "i486DX", CPUCLASS_486 }, /* CPU_486 */ { "Pentium", CPUCLASS_586 }, /* CPU_586 */ { "Cyrix 486", CPUCLASS_486 }, /* CPU_486DLC */ { "Pentium Pro", CPUCLASS_686 }, /* CPU_686 */ { "Cyrix 5x86", CPUCLASS_486 }, /* CPU_M1SC */ { "Cyrix 6x86", CPUCLASS_486 }, /* CPU_M1 */ { "Blue Lightning", CPUCLASS_486 }, /* CPU_BLUE */ { "Cyrix 6x86MX", CPUCLASS_686 }, /* CPU_M2 */ { "NexGen 586", CPUCLASS_386 }, /* CPU_NX586 (XXX) */ { "Cyrix 486S/DX", CPUCLASS_486 }, /* CPU_CY486DX */ { "Pentium II", CPUCLASS_686 }, /* CPU_PII */ { "Pentium III", CPUCLASS_686 }, /* CPU_PIII */ { "Pentium 4", CPUCLASS_686 }, /* CPU_P4 */ }; #endif static struct { char *vendor; u_int vendor_id; } cpu_vendors[] = { { INTEL_VENDOR_ID, CPU_VENDOR_INTEL }, /* GenuineIntel */ { AMD_VENDOR_ID, CPU_VENDOR_AMD }, /* AuthenticAMD */ { CENTAUR_VENDOR_ID, CPU_VENDOR_CENTAUR }, /* CentaurHauls */ #ifdef __i386__ { NSC_VENDOR_ID, CPU_VENDOR_NSC }, /* Geode by NSC */ { CYRIX_VENDOR_ID, CPU_VENDOR_CYRIX }, /* CyrixInstead */ { TRANSMETA_VENDOR_ID, CPU_VENDOR_TRANSMETA }, /* GenuineTMx86 */ { SIS_VENDOR_ID, CPU_VENDOR_SIS }, /* SiS SiS SiS */ { UMC_VENDOR_ID, CPU_VENDOR_UMC }, /* UMC UMC UMC */ { NEXGEN_VENDOR_ID, CPU_VENDOR_NEXGEN }, /* NexGenDriven */ { RISE_VENDOR_ID, CPU_VENDOR_RISE }, /* RiseRiseRise */ #if 0 /* XXX CPUID 8000_0000h and 8086_0000h, not 0000_0000h */ { "TransmetaCPU", CPU_VENDOR_TRANSMETA }, #endif #endif }; void printcpuinfo(void) { u_int regs[4], i; char *brand; printf("CPU: "); #ifdef __i386__ cpu_class = cpus[cpu].cpu_class; strncpy(cpu_model, cpus[cpu].cpu_name, sizeof (cpu_model)); #else strncpy(cpu_model, "Hammer", sizeof (cpu_model)); #endif /* Check for extended CPUID information and a processor name. */ if (cpu_exthigh >= 0x80000004) { brand = cpu_brand; for (i = 0x80000002; i < 0x80000005; i++) { do_cpuid(i, regs); memcpy(brand, regs, sizeof(regs)); brand += sizeof(regs); } } switch (cpu_vendor_id) { case CPU_VENDOR_INTEL: #ifdef __i386__ if ((cpu_id & 0xf00) > 0x300) { u_int brand_index; cpu_model[0] = '\0'; switch (cpu_id & 0x3000) { case 0x1000: strcpy(cpu_model, "Overdrive "); break; case 0x2000: strcpy(cpu_model, "Dual "); break; } switch (cpu_id & 0xf00) { case 0x400: strcat(cpu_model, "i486 "); /* Check the particular flavor of 486 */ switch (cpu_id & 0xf0) { case 0x00: case 0x10: strcat(cpu_model, "DX"); break; case 0x20: strcat(cpu_model, "SX"); break; case 0x30: strcat(cpu_model, "DX2"); break; case 0x40: strcat(cpu_model, "SL"); break; case 0x50: strcat(cpu_model, "SX2"); break; case 0x70: strcat(cpu_model, "DX2 Write-Back Enhanced"); break; case 0x80: strcat(cpu_model, "DX4"); break; } break; case 0x500: /* Check the particular flavor of 586 */ strcat(cpu_model, "Pentium"); switch (cpu_id & 0xf0) { case 0x00: strcat(cpu_model, " A-step"); break; case 0x10: strcat(cpu_model, "/P5"); break; case 0x20: strcat(cpu_model, "/P54C"); break; case 0x30: strcat(cpu_model, "/P24T"); break; case 0x40: strcat(cpu_model, "/P55C"); break; case 0x70: strcat(cpu_model, "/P54C"); break; case 0x80: strcat(cpu_model, "/P55C (quarter-micron)"); break; default: /* nothing */ break; } #if defined(I586_CPU) && !defined(NO_F00F_HACK) /* * XXX - If/when Intel fixes the bug, this * should also check the version of the * CPU, not just that it's a Pentium. */ has_f00f_bug = 1; #endif break; case 0x600: /* Check the particular flavor of 686 */ switch (cpu_id & 0xf0) { case 0x00: strcat(cpu_model, "Pentium Pro A-step"); break; case 0x10: strcat(cpu_model, "Pentium Pro"); break; case 0x30: case 0x50: case 0x60: strcat(cpu_model, "Pentium II/Pentium II Xeon/Celeron"); cpu = CPU_PII; break; case 0x70: case 0x80: case 0xa0: case 0xb0: strcat(cpu_model, "Pentium III/Pentium III Xeon/Celeron"); cpu = CPU_PIII; break; default: strcat(cpu_model, "Unknown 80686"); break; } break; case 0xf00: strcat(cpu_model, "Pentium 4"); cpu = CPU_P4; break; default: strcat(cpu_model, "unknown"); break; } /* * If we didn't get a brand name from the extended * CPUID, try to look it up in the brand table. */ if (cpu_high > 0 && *cpu_brand == '\0') { brand_index = cpu_procinfo & CPUID_BRAND_INDEX; if (brand_index <= MAX_BRAND_INDEX && cpu_brandtable[brand_index] != NULL) strcpy(cpu_brand, cpu_brandtable[brand_index]); } } #else /* Please make up your mind folks! */ strcat(cpu_model, "EM64T"); #endif break; case CPU_VENDOR_AMD: /* * Values taken from AMD Processor Recognition * http://www.amd.com/K6/k6docs/pdf/20734g.pdf * (also describes ``Features'' encodings. */ strcpy(cpu_model, "AMD "); #ifdef __i386__ switch (cpu_id & 0xFF0) { case 0x410: strcat(cpu_model, "Standard Am486DX"); break; case 0x430: strcat(cpu_model, "Enhanced Am486DX2 Write-Through"); break; case 0x470: strcat(cpu_model, "Enhanced Am486DX2 Write-Back"); break; case 0x480: strcat(cpu_model, "Enhanced Am486DX4/Am5x86 Write-Through"); break; case 0x490: strcat(cpu_model, "Enhanced Am486DX4/Am5x86 Write-Back"); break; case 0x4E0: strcat(cpu_model, "Am5x86 Write-Through"); break; case 0x4F0: strcat(cpu_model, "Am5x86 Write-Back"); break; case 0x500: strcat(cpu_model, "K5 model 0"); break; case 0x510: strcat(cpu_model, "K5 model 1"); break; case 0x520: strcat(cpu_model, "K5 PR166 (model 2)"); break; case 0x530: strcat(cpu_model, "K5 PR200 (model 3)"); break; case 0x560: strcat(cpu_model, "K6"); break; case 0x570: strcat(cpu_model, "K6 266 (model 1)"); break; case 0x580: strcat(cpu_model, "K6-2"); break; case 0x590: strcat(cpu_model, "K6-III"); break; case 0x5a0: strcat(cpu_model, "Geode LX"); break; default: strcat(cpu_model, "Unknown"); break; } #else if ((cpu_id & 0xf00) == 0xf00) strcat(cpu_model, "AMD64 Processor"); else strcat(cpu_model, "Unknown"); #endif break; #ifdef __i386__ case CPU_VENDOR_CYRIX: strcpy(cpu_model, "Cyrix "); switch (cpu_id & 0xff0) { case 0x440: strcat(cpu_model, "MediaGX"); break; case 0x520: strcat(cpu_model, "6x86"); break; case 0x540: cpu_class = CPUCLASS_586; strcat(cpu_model, "GXm"); break; case 0x600: strcat(cpu_model, "6x86MX"); break; default: /* * Even though CPU supports the cpuid * instruction, it can be disabled. * Therefore, this routine supports all Cyrix * CPUs. */ switch (cyrix_did & 0xf0) { case 0x00: switch (cyrix_did & 0x0f) { case 0x00: strcat(cpu_model, "486SLC"); break; case 0x01: strcat(cpu_model, "486DLC"); break; case 0x02: strcat(cpu_model, "486SLC2"); break; case 0x03: strcat(cpu_model, "486DLC2"); break; case 0x04: strcat(cpu_model, "486SRx"); break; case 0x05: strcat(cpu_model, "486DRx"); break; case 0x06: strcat(cpu_model, "486SRx2"); break; case 0x07: strcat(cpu_model, "486DRx2"); break; case 0x08: strcat(cpu_model, "486SRu"); break; case 0x09: strcat(cpu_model, "486DRu"); break; case 0x0a: strcat(cpu_model, "486SRu2"); break; case 0x0b: strcat(cpu_model, "486DRu2"); break; default: strcat(cpu_model, "Unknown"); break; } break; case 0x10: switch (cyrix_did & 0x0f) { case 0x00: strcat(cpu_model, "486S"); break; case 0x01: strcat(cpu_model, "486S2"); break; case 0x02: strcat(cpu_model, "486Se"); break; case 0x03: strcat(cpu_model, "486S2e"); break; case 0x0a: strcat(cpu_model, "486DX"); break; case 0x0b: strcat(cpu_model, "486DX2"); break; case 0x0f: strcat(cpu_model, "486DX4"); break; default: strcat(cpu_model, "Unknown"); break; } break; case 0x20: if ((cyrix_did & 0x0f) < 8) strcat(cpu_model, "6x86"); /* Where did you get it? */ else strcat(cpu_model, "5x86"); break; case 0x30: strcat(cpu_model, "6x86"); break; case 0x40: if ((cyrix_did & 0xf000) == 0x3000) { cpu_class = CPUCLASS_586; strcat(cpu_model, "GXm"); } else strcat(cpu_model, "MediaGX"); break; case 0x50: strcat(cpu_model, "6x86MX"); break; case 0xf0: switch (cyrix_did & 0x0f) { case 0x0d: strcat(cpu_model, "Overdrive CPU"); break; case 0x0e: strcpy(cpu_model, "Texas Instruments 486SXL"); break; case 0x0f: strcat(cpu_model, "486SLC/DLC"); break; default: strcat(cpu_model, "Unknown"); break; } break; default: strcat(cpu_model, "Unknown"); break; } break; } break; case CPU_VENDOR_RISE: strcpy(cpu_model, "Rise "); switch (cpu_id & 0xff0) { case 0x500: /* 6401 and 6441 (Kirin) */ case 0x520: /* 6510 (Lynx) */ strcat(cpu_model, "mP6"); break; default: strcat(cpu_model, "Unknown"); } break; #endif case CPU_VENDOR_CENTAUR: #ifdef __i386__ switch (cpu_id & 0xff0) { case 0x540: strcpy(cpu_model, "IDT WinChip C6"); break; case 0x580: strcpy(cpu_model, "IDT WinChip 2"); break; case 0x590: strcpy(cpu_model, "IDT WinChip 3"); break; case 0x660: strcpy(cpu_model, "VIA C3 Samuel"); break; case 0x670: if (cpu_id & 0x8) strcpy(cpu_model, "VIA C3 Ezra"); else strcpy(cpu_model, "VIA C3 Samuel 2"); break; case 0x680: strcpy(cpu_model, "VIA C3 Ezra-T"); break; case 0x690: strcpy(cpu_model, "VIA C3 Nehemiah"); break; case 0x6a0: case 0x6d0: strcpy(cpu_model, "VIA C7 Esther"); break; case 0x6f0: strcpy(cpu_model, "VIA Nano"); break; default: strcpy(cpu_model, "VIA/IDT Unknown"); } #else strcpy(cpu_model, "VIA "); if ((cpu_id & 0xff0) == 0x6f0) strcat(cpu_model, "Nano Processor"); else strcat(cpu_model, "Unknown"); #endif break; #ifdef __i386__ case CPU_VENDOR_IBM: strcpy(cpu_model, "Blue Lightning CPU"); break; case CPU_VENDOR_NSC: switch (cpu_id & 0xff0) { case 0x540: strcpy(cpu_model, "Geode SC1100"); cpu = CPU_GEODE1100; break; default: strcpy(cpu_model, "Geode/NSC unknown"); break; } break; #endif default: strcat(cpu_model, "Unknown"); break; } /* * Replace cpu_model with cpu_brand minus leading spaces if * we have one. */ brand = cpu_brand; while (*brand == ' ') ++brand; if (*brand != '\0') strcpy(cpu_model, brand); printf("%s (", cpu_model); if (tsc_freq != 0) { hw_clockrate = (tsc_freq + 5000) / 1000000; printf("%jd.%02d-MHz ", (intmax_t)(tsc_freq + 4999) / 1000000, (u_int)((tsc_freq + 4999) / 10000) % 100); } #ifdef __i386__ switch(cpu_class) { case CPUCLASS_286: printf("286"); break; case CPUCLASS_386: printf("386"); break; #if defined(I486_CPU) case CPUCLASS_486: printf("486"); break; #endif #if defined(I586_CPU) case CPUCLASS_586: printf("586"); break; #endif #if defined(I686_CPU) case CPUCLASS_686: printf("686"); break; #endif default: printf("Unknown"); /* will panic below... */ } #else printf("K8"); #endif printf("-class CPU)\n"); if (*cpu_vendor) printf(" Origin=\"%s\"", cpu_vendor); if (cpu_id) printf(" Id=0x%x", cpu_id); if (cpu_vendor_id == CPU_VENDOR_INTEL || cpu_vendor_id == CPU_VENDOR_AMD || cpu_vendor_id == CPU_VENDOR_CENTAUR || #ifdef __i386__ cpu_vendor_id == CPU_VENDOR_TRANSMETA || cpu_vendor_id == CPU_VENDOR_RISE || cpu_vendor_id == CPU_VENDOR_NSC || (cpu_vendor_id == CPU_VENDOR_CYRIX && ((cpu_id & 0xf00) > 0x500)) || #endif 0) { printf(" Family=0x%x", CPUID_TO_FAMILY(cpu_id)); printf(" Model=0x%x", CPUID_TO_MODEL(cpu_id)); printf(" Stepping=%u", cpu_id & CPUID_STEPPING); #ifdef __i386__ if (cpu_vendor_id == CPU_VENDOR_CYRIX) printf("\n DIR=0x%04x", cyrix_did); #endif /* * AMD CPUID Specification * http://support.amd.com/us/Embedded_TechDocs/25481.pdf * * Intel Processor Identification and CPUID Instruction * http://www.intel.com/assets/pdf/appnote/241618.pdf */ if (cpu_high > 0) { /* * Here we should probably set up flags indicating * whether or not various features are available. * The interesting ones are probably VME, PSE, PAE, * and PGE. The code already assumes without bothering * to check that all CPUs >= Pentium have a TSC and * MSRs. */ printf("\n Features=0x%b", cpu_feature, "\020" "\001FPU" /* Integral FPU */ "\002VME" /* Extended VM86 mode support */ "\003DE" /* Debugging Extensions (CR4.DE) */ "\004PSE" /* 4MByte page tables */ "\005TSC" /* Timestamp counter */ "\006MSR" /* Machine specific registers */ "\007PAE" /* Physical address extension */ "\010MCE" /* Machine Check support */ "\011CX8" /* CMPEXCH8 instruction */ "\012APIC" /* SMP local APIC */ "\013oldMTRR" /* Previous implementation of MTRR */ "\014SEP" /* Fast System Call */ "\015MTRR" /* Memory Type Range Registers */ "\016PGE" /* PG_G (global bit) support */ "\017MCA" /* Machine Check Architecture */ "\020CMOV" /* CMOV instruction */ "\021PAT" /* Page attributes table */ "\022PSE36" /* 36 bit address space support */ "\023PN" /* Processor Serial number */ "\024CLFLUSH" /* Has the CLFLUSH instruction */ "\025" "\026DTS" /* Debug Trace Store */ "\027ACPI" /* ACPI support */ "\030MMX" /* MMX instructions */ "\031FXSR" /* FXSAVE/FXRSTOR */ "\032SSE" /* Streaming SIMD Extensions */ "\033SSE2" /* Streaming SIMD Extensions #2 */ "\034SS" /* Self snoop */ "\035HTT" /* Hyperthreading (see EBX bit 16-23) */ "\036TM" /* Thermal Monitor clock slowdown */ "\037IA64" /* CPU can execute IA64 instructions */ "\040PBE" /* Pending Break Enable */ ); if (cpu_feature2 != 0) { printf("\n Features2=0x%b", cpu_feature2, "\020" "\001SSE3" /* SSE3 */ "\002PCLMULQDQ" /* Carry-Less Mul Quadword */ "\003DTES64" /* 64-bit Debug Trace */ "\004MON" /* MONITOR/MWAIT Instructions */ "\005DS_CPL" /* CPL Qualified Debug Store */ "\006VMX" /* Virtual Machine Extensions */ "\007SMX" /* Safer Mode Extensions */ "\010EST" /* Enhanced SpeedStep */ "\011TM2" /* Thermal Monitor 2 */ "\012SSSE3" /* SSSE3 */ "\013CNXT-ID" /* L1 context ID available */ "\014SDBG" /* IA32 silicon debug */ "\015FMA" /* Fused Multiply Add */ "\016CX16" /* CMPXCHG16B Instruction */ "\017xTPR" /* Send Task Priority Messages*/ "\020PDCM" /* Perf/Debug Capability MSR */ "\021" "\022PCID" /* Process-context Identifiers*/ "\023DCA" /* Direct Cache Access */ "\024SSE4.1" /* SSE 4.1 */ "\025SSE4.2" /* SSE 4.2 */ "\026x2APIC" /* xAPIC Extensions */ "\027MOVBE" /* MOVBE Instruction */ "\030POPCNT" /* POPCNT Instruction */ "\031TSCDLT" /* TSC-Deadline Timer */ "\032AESNI" /* AES Crypto */ "\033XSAVE" /* XSAVE/XRSTOR States */ "\034OSXSAVE" /* OS-Enabled State Management*/ "\035AVX" /* Advanced Vector Extensions */ "\036F16C" /* Half-precision conversions */ "\037RDRAND" /* RDRAND Instruction */ "\040HV" /* Hypervisor */ ); } if (amd_feature != 0) { printf("\n AMD Features=0x%b", amd_feature, "\020" /* in hex */ "\001" /* Same */ "\002" /* Same */ "\003" /* Same */ "\004" /* Same */ "\005" /* Same */ "\006" /* Same */ "\007" /* Same */ "\010" /* Same */ "\011" /* Same */ "\012" /* Same */ "\013" /* Undefined */ "\014SYSCALL" /* Have SYSCALL/SYSRET */ "\015" /* Same */ "\016" /* Same */ "\017" /* Same */ "\020" /* Same */ "\021" /* Same */ "\022" /* Same */ "\023" /* Reserved, unknown */ "\024MP" /* Multiprocessor Capable */ "\025NX" /* Has EFER.NXE, NX */ "\026" /* Undefined */ "\027MMX+" /* AMD MMX Extensions */ "\030" /* Same */ "\031" /* Same */ "\032FFXSR" /* Fast FXSAVE/FXRSTOR */ "\033Page1GB" /* 1-GB large page support */ "\034RDTSCP" /* RDTSCP */ "\035" /* Undefined */ "\036LM" /* 64 bit long mode */ "\0373DNow!+" /* AMD 3DNow! Extensions */ "\0403DNow!" /* AMD 3DNow! */ ); } if (amd_feature2 != 0) { printf("\n AMD Features2=0x%b", amd_feature2, "\020" "\001LAHF" /* LAHF/SAHF in long mode */ "\002CMP" /* CMP legacy */ "\003SVM" /* Secure Virtual Mode */ "\004ExtAPIC" /* Extended APIC register */ "\005CR8" /* CR8 in legacy mode */ "\006ABM" /* LZCNT instruction */ "\007SSE4A" /* SSE4A */ "\010MAS" /* Misaligned SSE mode */ "\011Prefetch" /* 3DNow! Prefetch/PrefetchW */ "\012OSVW" /* OS visible workaround */ "\013IBS" /* Instruction based sampling */ "\014XOP" /* XOP extended instructions */ "\015SKINIT" /* SKINIT/STGI */ "\016WDT" /* Watchdog timer */ "\017" "\020LWP" /* Lightweight Profiling */ "\021FMA4" /* 4-operand FMA instructions */ "\022TCE" /* Translation Cache Extension */ "\023" "\024NodeId" /* NodeId MSR support */ "\025" "\026TBM" /* Trailing Bit Manipulation */ "\027Topology" /* Topology Extensions */ "\030PCXC" /* Core perf count */ "\031PNXC" /* NB perf count */ "\032" "\033DBE" /* Data Breakpoint extension */ "\034PTSC" /* Performance TSC */ "\035PL2I" /* L2I perf count */ "\036MWAITX" /* MONITORX/MWAITX instructions */ "\037" "\040" ); } if (cpu_stdext_feature != 0) { printf("\n Structured Extended Features=0x%b", cpu_stdext_feature, "\020" /* RDFSBASE/RDGSBASE/WRFSBASE/WRGSBASE */ "\001FSGSBASE" "\002TSCADJ" "\003SGX" /* Bit Manipulation Instructions */ "\004BMI1" /* Hardware Lock Elision */ "\005HLE" /* Advanced Vector Instructions 2 */ "\006AVX2" /* FDP_EXCPTN_ONLY */ "\007FDPEXC" /* Supervisor Mode Execution Prot. */ "\010SMEP" /* Bit Manipulation Instructions */ "\011BMI2" "\012ERMS" /* Invalidate Processor Context ID */ "\013INVPCID" /* Restricted Transactional Memory */ "\014RTM" "\015PQM" "\016NFPUSG" /* Intel Memory Protection Extensions */ "\017MPX" "\020PQE" /* AVX512 Foundation */ "\021AVX512F" "\022AVX512DQ" /* Enhanced NRBG */ "\023RDSEED" /* ADCX + ADOX */ "\024ADX" /* Supervisor Mode Access Prevention */ "\025SMAP" "\026AVX512IFMA" "\027PCOMMIT" "\030CLFLUSHOPT" "\031CLWB" "\032PROCTRACE" "\033AVX512PF" "\034AVX512ER" "\035AVX512CD" "\036SHA" "\037AVX512BW" "\040AVX512VL" ); } if (cpu_stdext_feature2 != 0) { printf("\n Structured Extended Features2=0x%b", cpu_stdext_feature2, "\020" "\001PREFETCHWT1" "\002AVX512VBMI" "\003UMIP" "\004PKU" "\005OSPKE" "\027RDPID" "\037SGXLC" ); } if (cpu_stdext_feature3 != 0) { printf("\n Structured Extended Features3=0x%b", cpu_stdext_feature3, "\020" "\033IBPB" "\034STIBP" "\036ARCH_CAP" ); } if ((cpu_feature2 & CPUID2_XSAVE) != 0) { cpuid_count(0xd, 0x1, regs); if (regs[0] != 0) { printf("\n XSAVE Features=0x%b", regs[0], "\020" "\001XSAVEOPT" "\002XSAVEC" "\003XINUSE" "\004XSAVES"); } } if (cpu_ia32_arch_caps != 0) { printf("\n IA32_ARCH_CAPS=0x%b", (u_int)cpu_ia32_arch_caps, "\020" "\001RDCL_NO" "\002IBRS_ALL" ); } if (amd_extended_feature_extensions != 0) { printf("\n " "AMD Extended Feature Extensions ID EBX=" "0x%b", amd_extended_feature_extensions, "\020" "\001CLZERO" "\002IRPerf" "\003XSaveErPtr"); } if (via_feature_rng != 0 || via_feature_xcrypt != 0) print_via_padlock_info(); if (cpu_feature2 & CPUID2_VMX) print_vmx_info(); if (amd_feature2 & AMDID2_SVM) print_svm_info(); if ((cpu_feature & CPUID_HTT) && cpu_vendor_id == CPU_VENDOR_AMD) cpu_feature &= ~CPUID_HTT; /* * If this CPU supports P-state invariant TSC then * mention the capability. */ if (tsc_is_invariant) { printf("\n TSC: P-state invariant"); if (tsc_perf_stat) printf(", performance statistics"); } } #ifdef __i386__ } else if (cpu_vendor_id == CPU_VENDOR_CYRIX) { printf(" DIR=0x%04x", cyrix_did); printf(" Stepping=%u", (cyrix_did & 0xf000) >> 12); printf(" Revision=%u", (cyrix_did & 0x0f00) >> 8); #ifndef CYRIX_CACHE_REALLY_WORKS if (cpu == CPU_M1 && (cyrix_did & 0xff00) < 0x1700) printf("\n CPU cache: write-through mode"); #endif #endif } /* Avoid ugly blank lines: only print newline when we have to. */ if (*cpu_vendor || cpu_id) printf("\n"); if (bootverbose) { if (cpu_vendor_id == CPU_VENDOR_AMD) print_AMD_info(); else if (cpu_vendor_id == CPU_VENDOR_INTEL) print_INTEL_info(); #ifdef __i386__ else if (cpu_vendor_id == CPU_VENDOR_TRANSMETA) print_transmeta_info(); #endif } print_hypervisor_info(); } #ifdef __i386__ void panicifcpuunsupported(void) { #if !defined(lint) #if !defined(I486_CPU) && !defined(I586_CPU) && !defined(I686_CPU) #error This kernel is not configured for one of the supported CPUs #endif #else /* lint */ #endif /* lint */ /* * Now that we have told the user what they have, * let them know if that machine type isn't configured. */ switch (cpu_class) { case CPUCLASS_286: /* a 286 should not make it this far, anyway */ case CPUCLASS_386: #if !defined(I486_CPU) case CPUCLASS_486: #endif #if !defined(I586_CPU) case CPUCLASS_586: #endif #if !defined(I686_CPU) case CPUCLASS_686: #endif panic("CPU class not configured"); default: break; } } static volatile u_int trap_by_rdmsr; /* * Special exception 6 handler. * The rdmsr instruction generates invalid opcodes fault on 486-class * Cyrix CPU. Stacked eip register points the rdmsr instruction in the * function identblue() when this handler is called. Stacked eip should * be advanced. */ inthand_t bluetrap6; #ifdef __GNUCLIKE_ASM __asm (" \n\ .text \n\ .p2align 2,0x90 \n\ .type " __XSTRING(CNAME(bluetrap6)) ",@function \n\ " __XSTRING(CNAME(bluetrap6)) ": \n\ ss \n\ movl $0xa8c1d," __XSTRING(CNAME(trap_by_rdmsr)) " \n\ addl $2, (%esp) /* rdmsr is a 2-byte instruction */ \n\ iret \n\ "); #endif /* * Special exception 13 handler. * Accessing non-existent MSR generates general protection fault. */ inthand_t bluetrap13; #ifdef __GNUCLIKE_ASM __asm (" \n\ .text \n\ .p2align 2,0x90 \n\ .type " __XSTRING(CNAME(bluetrap13)) ",@function \n\ " __XSTRING(CNAME(bluetrap13)) ": \n\ ss \n\ movl $0xa89c4," __XSTRING(CNAME(trap_by_rdmsr)) " \n\ popl %eax /* discard error code */ \n\ addl $2, (%esp) /* rdmsr is a 2-byte instruction */ \n\ iret \n\ "); #endif /* * Distinguish IBM Blue Lightning CPU from Cyrix CPUs that does not * support cpuid instruction. This function should be called after * loading interrupt descriptor table register. * * I don't like this method that handles fault, but I couldn't get * information for any other methods. Does blue giant know? */ static int identblue(void) { trap_by_rdmsr = 0; /* * Cyrix 486-class CPU does not support rdmsr instruction. * The rdmsr instruction generates invalid opcode fault, and exception * will be trapped by bluetrap6() on Cyrix 486-class CPU. The * bluetrap6() set the magic number to trap_by_rdmsr. */ setidt(IDT_UD, bluetrap6, SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); /* * Certain BIOS disables cpuid instruction of Cyrix 6x86MX CPU. * In this case, rdmsr generates general protection fault, and * exception will be trapped by bluetrap13(). */ setidt(IDT_GP, bluetrap13, SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); rdmsr(0x1002); /* Cyrix CPU generates fault. */ if (trap_by_rdmsr == 0xa8c1d) return IDENTBLUE_CYRIX486; else if (trap_by_rdmsr == 0xa89c4) return IDENTBLUE_CYRIXM2; return IDENTBLUE_IBMCPU; } /* * identifycyrix() set lower 16 bits of cyrix_did as follows: * * F E D C B A 9 8 7 6 5 4 3 2 1 0 * +-------+-------+---------------+ * | SID | RID | Device ID | * | (DIR 1) | (DIR 0) | * +-------+-------+---------------+ */ static void identifycyrix(void) { register_t saveintr; int ccr2_test = 0, dir_test = 0; u_char ccr2, ccr3; saveintr = intr_disable(); ccr2 = read_cyrix_reg(CCR2); write_cyrix_reg(CCR2, ccr2 ^ CCR2_LOCK_NW); read_cyrix_reg(CCR2); if (read_cyrix_reg(CCR2) != ccr2) ccr2_test = 1; write_cyrix_reg(CCR2, ccr2); ccr3 = read_cyrix_reg(CCR3); write_cyrix_reg(CCR3, ccr3 ^ CCR3_MAPEN3); read_cyrix_reg(CCR3); if (read_cyrix_reg(CCR3) != ccr3) dir_test = 1; /* CPU supports DIRs. */ write_cyrix_reg(CCR3, ccr3); if (dir_test) { /* Device ID registers are available. */ cyrix_did = read_cyrix_reg(DIR1) << 8; cyrix_did += read_cyrix_reg(DIR0); } else if (ccr2_test) cyrix_did = 0x0010; /* 486S A-step */ else cyrix_did = 0x00ff; /* Old 486SLC/DLC and TI486SXLC/SXL */ intr_restore(saveintr); } #endif /* Update TSC freq with the value indicated by the caller. */ static void tsc_freq_changed(void *arg __unused, const struct cf_level *level, int status) { /* If there was an error during the transition, don't do anything. */ if (status != 0) return; /* Total setting for this level gives the new frequency in MHz. */ hw_clockrate = level->total_set.freq; } static void hook_tsc_freq(void *arg __unused) { if (tsc_is_invariant) return; tsc_post_tag = EVENTHANDLER_REGISTER(cpufreq_post_change, tsc_freq_changed, NULL, EVENTHANDLER_PRI_ANY); } SYSINIT(hook_tsc_freq, SI_SUB_CONFIGURE, SI_ORDER_ANY, hook_tsc_freq, NULL); static const char *const vm_bnames[] = { "QEMU", /* QEMU */ "Plex86", /* Plex86 */ "Bochs", /* Bochs */ "Xen", /* Xen */ "BHYVE", /* bhyve */ "Seabios", /* KVM */ NULL }; static const char *const vm_pnames[] = { "VMware Virtual Platform", /* VMWare VM */ "Virtual Machine", /* Microsoft VirtualPC */ "VirtualBox", /* Sun xVM VirtualBox */ "Parallels Virtual Platform", /* Parallels VM */ "KVM", /* KVM */ NULL }; void identify_hypervisor(void) { u_int regs[4]; char *p; int i; /* * [RFC] CPUID usage for interaction between Hypervisors and Linux. * http://lkml.org/lkml/2008/10/1/246 * * KB1009458: Mechanisms to determine if software is running in * a VMware virtual machine * http://kb.vmware.com/kb/1009458 */ if (cpu_feature2 & CPUID2_HV) { vm_guest = VM_GUEST_VM; do_cpuid(0x40000000, regs); if (regs[0] >= 0x40000000) { hv_high = regs[0]; ((u_int *)&hv_vendor)[0] = regs[1]; ((u_int *)&hv_vendor)[1] = regs[2]; ((u_int *)&hv_vendor)[2] = regs[3]; hv_vendor[12] = '\0'; if (strcmp(hv_vendor, "VMwareVMware") == 0) vm_guest = VM_GUEST_VMWARE; else if (strcmp(hv_vendor, "Microsoft Hv") == 0) vm_guest = VM_GUEST_HV; else if (strcmp(hv_vendor, "KVMKVMKVM") == 0) vm_guest = VM_GUEST_KVM; else if (strcmp(hv_vendor, "bhyve bhyve") == 0) vm_guest = VM_GUEST_BHYVE; } return; } /* * Examine SMBIOS strings for older hypervisors. */ p = kern_getenv("smbios.system.serial"); if (p != NULL) { if (strncmp(p, "VMware-", 7) == 0 || strncmp(p, "VMW", 3) == 0) { vmware_hvcall(VMW_HVCMD_GETVERSION, regs); if (regs[1] == VMW_HVMAGIC) { vm_guest = VM_GUEST_VMWARE; freeenv(p); return; } } freeenv(p); } /* * XXX: Some of these entries may not be needed since they were * added to FreeBSD before the checks above. */ p = kern_getenv("smbios.bios.vendor"); if (p != NULL) { for (i = 0; vm_bnames[i] != NULL; i++) if (strcmp(p, vm_bnames[i]) == 0) { vm_guest = VM_GUEST_VM; freeenv(p); return; } freeenv(p); } p = kern_getenv("smbios.system.product"); if (p != NULL) { for (i = 0; vm_pnames[i] != NULL; i++) if (strcmp(p, vm_pnames[i]) == 0) { vm_guest = VM_GUEST_VM; freeenv(p); return; } freeenv(p); } } bool fix_cpuid(void) { uint64_t msr; /* * Clear "Limit CPUID Maxval" bit and return true if the caller should * get the largest standard CPUID function number again if it is set * from BIOS. It is necessary for probing correct CPU topology later * and for the correct operation of the AVX-aware userspace. */ if (cpu_vendor_id == CPU_VENDOR_INTEL && ((CPUID_TO_FAMILY(cpu_id) == 0xf && CPUID_TO_MODEL(cpu_id) >= 0x3) || (CPUID_TO_FAMILY(cpu_id) == 0x6 && CPUID_TO_MODEL(cpu_id) >= 0xe))) { msr = rdmsr(MSR_IA32_MISC_ENABLE); if ((msr & IA32_MISC_EN_LIMCPUID) != 0) { msr &= ~IA32_MISC_EN_LIMCPUID; wrmsr(MSR_IA32_MISC_ENABLE, msr); return (true); } } /* * Re-enable AMD Topology Extension that could be disabled by BIOS * on some notebook processors. Without the extension it's really * hard to determine the correct CPU cache topology. * See BIOS and Kernel Developer’s Guide (BKDG) for AMD Family 15h * Models 60h-6Fh Processors, Publication # 50742. */ if (cpu_vendor_id == CPU_VENDOR_AMD && CPUID_TO_FAMILY(cpu_id) == 0x15) { msr = rdmsr(MSR_EXTFEATURES); if ((msr & ((uint64_t)1 << 54)) == 0) { msr |= (uint64_t)1 << 54; wrmsr(MSR_EXTFEATURES, msr); return (true); } } return (false); } void identify_cpu1(void) { u_int regs[4]; do_cpuid(0, regs); cpu_high = regs[0]; ((u_int *)&cpu_vendor)[0] = regs[1]; ((u_int *)&cpu_vendor)[1] = regs[3]; ((u_int *)&cpu_vendor)[2] = regs[2]; cpu_vendor[12] = '\0'; do_cpuid(1, regs); cpu_id = regs[0]; cpu_procinfo = regs[1]; cpu_feature = regs[3]; cpu_feature2 = regs[2]; } void identify_cpu2(void) { u_int regs[4], cpu_stdext_disable; if (cpu_high >= 7) { cpuid_count(7, 0, regs); cpu_stdext_feature = regs[1]; /* * Some hypervisors failed to filter out unsupported * extended features. Allow to disable the * extensions, activation of which requires setting a * bit in CR4, and which VM monitors do not support. */ cpu_stdext_disable = 0; TUNABLE_INT_FETCH("hw.cpu_stdext_disable", &cpu_stdext_disable); cpu_stdext_feature &= ~cpu_stdext_disable; cpu_stdext_feature2 = regs[2]; cpu_stdext_feature3 = regs[3]; if ((cpu_stdext_feature3 & CPUID_STDEXT3_ARCH_CAP) != 0) cpu_ia32_arch_caps = rdmsr(MSR_IA32_ARCH_CAP); } } /* * Final stage of CPU identification. */ void finishidentcpu(void) { u_int regs[4]; #ifdef __i386__ u_char ccr3; #endif cpu_vendor_id = find_cpu_vendor_id(); if (fix_cpuid()) { do_cpuid(0, regs); cpu_high = regs[0]; } if (cpu_high >= 5 && (cpu_feature2 & CPUID2_MON) != 0) { do_cpuid(5, regs); cpu_mon_mwait_flags = regs[2]; cpu_mon_min_size = regs[0] & CPUID5_MON_MIN_SIZE; cpu_mon_max_size = regs[1] & CPUID5_MON_MAX_SIZE; } identify_cpu2(); #ifdef __i386__ if (cpu_high > 0 && (cpu_vendor_id == CPU_VENDOR_INTEL || cpu_vendor_id == CPU_VENDOR_AMD || cpu_vendor_id == CPU_VENDOR_TRANSMETA || cpu_vendor_id == CPU_VENDOR_CENTAUR || cpu_vendor_id == CPU_VENDOR_NSC)) { do_cpuid(0x80000000, regs); if (regs[0] >= 0x80000000) cpu_exthigh = regs[0]; } #else if (cpu_vendor_id == CPU_VENDOR_INTEL || cpu_vendor_id == CPU_VENDOR_AMD || cpu_vendor_id == CPU_VENDOR_CENTAUR) { do_cpuid(0x80000000, regs); cpu_exthigh = regs[0]; } #endif if (cpu_exthigh >= 0x80000001) { do_cpuid(0x80000001, regs); amd_feature = regs[3] & ~(cpu_feature & 0x0183f3ff); amd_feature2 = regs[2]; } if (cpu_exthigh >= 0x80000007) { do_cpuid(0x80000007, regs); amd_rascap = regs[1]; amd_pminfo = regs[3]; } if (cpu_exthigh >= 0x80000008) { do_cpuid(0x80000008, regs); cpu_maxphyaddr = regs[0] & 0xff; amd_extended_feature_extensions = regs[1]; cpu_procinfo2 = regs[2]; } else { cpu_maxphyaddr = (cpu_feature & CPUID_PAE) != 0 ? 36 : 32; } #ifdef __i386__ if (cpu_vendor_id == CPU_VENDOR_CYRIX) { if (cpu == CPU_486) { /* * These conditions are equivalent to: * - CPU does not support cpuid instruction. * - Cyrix/IBM CPU is detected. */ if (identblue() == IDENTBLUE_IBMCPU) { strcpy(cpu_vendor, "IBM"); cpu_vendor_id = CPU_VENDOR_IBM; cpu = CPU_BLUE; return; } } switch (cpu_id & 0xf00) { case 0x600: /* * Cyrix's datasheet does not describe DIRs. * Therefor, I assume it does not have them * and use the result of the cpuid instruction. * XXX they seem to have it for now at least. -Peter */ identifycyrix(); cpu = CPU_M2; break; default: identifycyrix(); /* * This routine contains a trick. * Don't check (cpu_id & 0x00f0) == 0x50 to detect M2, now. */ switch (cyrix_did & 0x00f0) { case 0x00: case 0xf0: cpu = CPU_486DLC; break; case 0x10: cpu = CPU_CY486DX; break; case 0x20: if ((cyrix_did & 0x000f) < 8) cpu = CPU_M1; else cpu = CPU_M1SC; break; case 0x30: cpu = CPU_M1; break; case 0x40: /* MediaGX CPU */ cpu = CPU_M1SC; break; default: /* M2 and later CPUs are treated as M2. */ cpu = CPU_M2; /* * enable cpuid instruction. */ ccr3 = read_cyrix_reg(CCR3); write_cyrix_reg(CCR3, CCR3_MAPEN0); write_cyrix_reg(CCR4, read_cyrix_reg(CCR4) | CCR4_CPUID); write_cyrix_reg(CCR3, ccr3); do_cpuid(0, regs); cpu_high = regs[0]; /* eax */ do_cpuid(1, regs); cpu_id = regs[0]; /* eax */ cpu_feature = regs[3]; /* edx */ break; } } } else if (cpu == CPU_486 && *cpu_vendor == '\0') { /* * There are BlueLightning CPUs that do not change * undefined flags by dividing 5 by 2. In this case, * the CPU identification routine in locore.s leaves * cpu_vendor null string and puts CPU_486 into the * cpu. */ if (identblue() == IDENTBLUE_IBMCPU) { strcpy(cpu_vendor, "IBM"); cpu_vendor_id = CPU_VENDOR_IBM; cpu = CPU_BLUE; return; } } #endif } int pti_get_default(void) { if (strcmp(cpu_vendor, AMD_VENDOR_ID) == 0) return (0); - + if ((cpu_ia32_arch_caps & IA32_ARCH_CAP_RDCL_NO) != 0) + return (0); return (1); } static u_int find_cpu_vendor_id(void) { int i; for (i = 0; i < nitems(cpu_vendors); i++) if (strcmp(cpu_vendor, cpu_vendors[i].vendor) == 0) return (cpu_vendors[i].vendor_id); return (0); } static void print_AMD_assoc(int i) { if (i == 255) printf(", fully associative\n"); else printf(", %d-way associative\n", i); } static void print_AMD_l2_assoc(int i) { switch (i & 0x0f) { case 0: printf(", disabled/not present\n"); break; case 1: printf(", direct mapped\n"); break; case 2: printf(", 2-way associative\n"); break; case 4: printf(", 4-way associative\n"); break; case 6: printf(", 8-way associative\n"); break; case 8: printf(", 16-way associative\n"); break; case 15: printf(", fully associative\n"); break; default: printf(", reserved configuration\n"); break; } } static void print_AMD_info(void) { #ifdef __i386__ uint64_t amd_whcr; #endif u_int regs[4]; if (cpu_exthigh >= 0x80000005) { do_cpuid(0x80000005, regs); printf("L1 2MB data TLB: %d entries", (regs[0] >> 16) & 0xff); print_AMD_assoc(regs[0] >> 24); printf("L1 2MB instruction TLB: %d entries", regs[0] & 0xff); print_AMD_assoc((regs[0] >> 8) & 0xff); printf("L1 4KB data TLB: %d entries", (regs[1] >> 16) & 0xff); print_AMD_assoc(regs[1] >> 24); printf("L1 4KB instruction TLB: %d entries", regs[1] & 0xff); print_AMD_assoc((regs[1] >> 8) & 0xff); printf("L1 data cache: %d kbytes", regs[2] >> 24); printf(", %d bytes/line", regs[2] & 0xff); printf(", %d lines/tag", (regs[2] >> 8) & 0xff); print_AMD_assoc((regs[2] >> 16) & 0xff); printf("L1 instruction cache: %d kbytes", regs[3] >> 24); printf(", %d bytes/line", regs[3] & 0xff); printf(", %d lines/tag", (regs[3] >> 8) & 0xff); print_AMD_assoc((regs[3] >> 16) & 0xff); } if (cpu_exthigh >= 0x80000006) { do_cpuid(0x80000006, regs); if ((regs[0] >> 16) != 0) { printf("L2 2MB data TLB: %d entries", (regs[0] >> 16) & 0xfff); print_AMD_l2_assoc(regs[0] >> 28); printf("L2 2MB instruction TLB: %d entries", regs[0] & 0xfff); print_AMD_l2_assoc((regs[0] >> 28) & 0xf); } else { printf("L2 2MB unified TLB: %d entries", regs[0] & 0xfff); print_AMD_l2_assoc((regs[0] >> 28) & 0xf); } if ((regs[1] >> 16) != 0) { printf("L2 4KB data TLB: %d entries", (regs[1] >> 16) & 0xfff); print_AMD_l2_assoc(regs[1] >> 28); printf("L2 4KB instruction TLB: %d entries", (regs[1] >> 16) & 0xfff); print_AMD_l2_assoc((regs[1] >> 28) & 0xf); } else { printf("L2 4KB unified TLB: %d entries", (regs[1] >> 16) & 0xfff); print_AMD_l2_assoc((regs[1] >> 28) & 0xf); } printf("L2 unified cache: %d kbytes", regs[2] >> 16); printf(", %d bytes/line", regs[2] & 0xff); printf(", %d lines/tag", (regs[2] >> 8) & 0x0f); print_AMD_l2_assoc((regs[2] >> 12) & 0x0f); } #ifdef __i386__ if (((cpu_id & 0xf00) == 0x500) && (((cpu_id & 0x0f0) > 0x80) || (((cpu_id & 0x0f0) == 0x80) && (cpu_id & 0x00f) > 0x07))) { /* K6-2(new core [Stepping 8-F]), K6-III or later */ amd_whcr = rdmsr(0xc0000082); if (!(amd_whcr & (0x3ff << 22))) { printf("Write Allocate Disable\n"); } else { printf("Write Allocate Enable Limit: %dM bytes\n", (u_int32_t)((amd_whcr & (0x3ff << 22)) >> 22) * 4); printf("Write Allocate 15-16M bytes: %s\n", (amd_whcr & (1 << 16)) ? "Enable" : "Disable"); } } else if (((cpu_id & 0xf00) == 0x500) && ((cpu_id & 0x0f0) > 0x50)) { /* K6, K6-2(old core) */ amd_whcr = rdmsr(0xc0000082); if (!(amd_whcr & (0x7f << 1))) { printf("Write Allocate Disable\n"); } else { printf("Write Allocate Enable Limit: %dM bytes\n", (u_int32_t)((amd_whcr & (0x7f << 1)) >> 1) * 4); printf("Write Allocate 15-16M bytes: %s\n", (amd_whcr & 0x0001) ? "Enable" : "Disable"); printf("Hardware Write Allocate Control: %s\n", (amd_whcr & 0x0100) ? "Enable" : "Disable"); } } #endif /* * Opteron Rev E shows a bug as in very rare occasions a read memory * barrier is not performed as expected if it is followed by a * non-atomic read-modify-write instruction. * As long as that bug pops up very rarely (intensive machine usage * on other operating systems generally generates one unexplainable * crash any 2 months) and as long as a model specific fix would be * impractical at this stage, print out a warning string if the broken * model and family are identified. */ if (CPUID_TO_FAMILY(cpu_id) == 0xf && CPUID_TO_MODEL(cpu_id) >= 0x20 && CPUID_TO_MODEL(cpu_id) <= 0x3f) printf("WARNING: This architecture revision has known SMP " "hardware bugs which may cause random instability\n"); } static void print_INTEL_info(void) { u_int regs[4]; u_int rounds, regnum; u_int nwaycode, nway; if (cpu_high >= 2) { rounds = 0; do { do_cpuid(0x2, regs); if (rounds == 0 && (rounds = (regs[0] & 0xff)) == 0) break; /* we have a buggy CPU */ for (regnum = 0; regnum <= 3; ++regnum) { if (regs[regnum] & (1<<31)) continue; if (regnum != 0) print_INTEL_TLB(regs[regnum] & 0xff); print_INTEL_TLB((regs[regnum] >> 8) & 0xff); print_INTEL_TLB((regs[regnum] >> 16) & 0xff); print_INTEL_TLB((regs[regnum] >> 24) & 0xff); } } while (--rounds > 0); } if (cpu_exthigh >= 0x80000006) { do_cpuid(0x80000006, regs); nwaycode = (regs[2] >> 12) & 0x0f; if (nwaycode >= 0x02 && nwaycode <= 0x08) nway = 1 << (nwaycode / 2); else nway = 0; printf("L2 cache: %u kbytes, %u-way associative, %u bytes/line\n", (regs[2] >> 16) & 0xffff, nway, regs[2] & 0xff); } } static void print_INTEL_TLB(u_int data) { switch (data) { case 0x0: case 0x40: default: break; case 0x1: printf("Instruction TLB: 4 KB pages, 4-way set associative, 32 entries\n"); break; case 0x2: printf("Instruction TLB: 4 MB pages, fully associative, 2 entries\n"); break; case 0x3: printf("Data TLB: 4 KB pages, 4-way set associative, 64 entries\n"); break; case 0x4: printf("Data TLB: 4 MB Pages, 4-way set associative, 8 entries\n"); break; case 0x6: printf("1st-level instruction cache: 8 KB, 4-way set associative, 32 byte line size\n"); break; case 0x8: printf("1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size\n"); break; case 0x9: printf("1st-level instruction cache: 32 KB, 4-way set associative, 64 byte line size\n"); break; case 0xa: printf("1st-level data cache: 8 KB, 2-way set associative, 32 byte line size\n"); break; case 0xb: printf("Instruction TLB: 4 MByte pages, 4-way set associative, 4 entries\n"); break; case 0xc: printf("1st-level data cache: 16 KB, 4-way set associative, 32 byte line size\n"); break; case 0xd: printf("1st-level data cache: 16 KBytes, 4-way set associative, 64 byte line size"); break; case 0xe: printf("1st-level data cache: 24 KBytes, 6-way set associative, 64 byte line size\n"); break; case 0x1d: printf("2nd-level cache: 128 KBytes, 2-way set associative, 64 byte line size\n"); break; case 0x21: printf("2nd-level cache: 256 KBytes, 8-way set associative, 64 byte line size\n"); break; case 0x22: printf("3rd-level cache: 512 KB, 4-way set associative, sectored cache, 64 byte line size\n"); break; case 0x23: printf("3rd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x24: printf("2nd-level cache: 1 MBytes, 16-way set associative, 64 byte line size\n"); break; case 0x25: printf("3rd-level cache: 2 MB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x29: printf("3rd-level cache: 4 MB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x2c: printf("1st-level data cache: 32 KB, 8-way set associative, 64 byte line size\n"); break; case 0x30: printf("1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size\n"); break; case 0x39: /* De-listed in SDM rev. 54 */ printf("2nd-level cache: 128 KB, 4-way set associative, sectored cache, 64 byte line size\n"); break; case 0x3b: /* De-listed in SDM rev. 54 */ printf("2nd-level cache: 128 KB, 2-way set associative, sectored cache, 64 byte line size\n"); break; case 0x3c: /* De-listed in SDM rev. 54 */ printf("2nd-level cache: 256 KB, 4-way set associative, sectored cache, 64 byte line size\n"); break; case 0x41: printf("2nd-level cache: 128 KB, 4-way set associative, 32 byte line size\n"); break; case 0x42: printf("2nd-level cache: 256 KB, 4-way set associative, 32 byte line size\n"); break; case 0x43: printf("2nd-level cache: 512 KB, 4-way set associative, 32 byte line size\n"); break; case 0x44: printf("2nd-level cache: 1 MB, 4-way set associative, 32 byte line size\n"); break; case 0x45: printf("2nd-level cache: 2 MB, 4-way set associative, 32 byte line size\n"); break; case 0x46: printf("3rd-level cache: 4 MB, 4-way set associative, 64 byte line size\n"); break; case 0x47: printf("3rd-level cache: 8 MB, 8-way set associative, 64 byte line size\n"); break; case 0x48: printf("2nd-level cache: 3MByte, 12-way set associative, 64 byte line size\n"); break; case 0x49: if (CPUID_TO_FAMILY(cpu_id) == 0xf && CPUID_TO_MODEL(cpu_id) == 0x6) printf("3rd-level cache: 4MB, 16-way set associative, 64-byte line size\n"); else printf("2nd-level cache: 4 MByte, 16-way set associative, 64 byte line size"); break; case 0x4a: printf("3rd-level cache: 6MByte, 12-way set associative, 64 byte line size\n"); break; case 0x4b: printf("3rd-level cache: 8MByte, 16-way set associative, 64 byte line size\n"); break; case 0x4c: printf("3rd-level cache: 12MByte, 12-way set associative, 64 byte line size\n"); break; case 0x4d: printf("3rd-level cache: 16MByte, 16-way set associative, 64 byte line size\n"); break; case 0x4e: printf("2nd-level cache: 6MByte, 24-way set associative, 64 byte line size\n"); break; case 0x4f: printf("Instruction TLB: 4 KByte pages, 32 entries\n"); break; case 0x50: printf("Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries\n"); break; case 0x51: printf("Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries\n"); break; case 0x52: printf("Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 256 entries\n"); break; case 0x55: printf("Instruction TLB: 2-MByte or 4-MByte pages, fully associative, 7 entries\n"); break; case 0x56: printf("Data TLB0: 4 MByte pages, 4-way set associative, 16 entries\n"); break; case 0x57: printf("Data TLB0: 4 KByte pages, 4-way associative, 16 entries\n"); break; case 0x59: printf("Data TLB0: 4 KByte pages, fully associative, 16 entries\n"); break; case 0x5a: printf("Data TLB0: 2-MByte or 4 MByte pages, 4-way set associative, 32 entries\n"); break; case 0x5b: printf("Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries\n"); break; case 0x5c: printf("Data TLB: 4 KB or 4 MB pages, fully associative, 128 entries\n"); break; case 0x5d: printf("Data TLB: 4 KB or 4 MB pages, fully associative, 256 entries\n"); break; case 0x60: printf("1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x61: printf("Instruction TLB: 4 KByte pages, fully associative, 48 entries\n"); break; case 0x63: printf("Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries\n"); break; case 0x64: printf("Data TLB: 4 KBytes pages, 4-way set associative, 512 entries\n"); break; case 0x66: printf("1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size\n"); break; case 0x67: printf("1st-level data cache: 16 KB, 4-way set associative, sectored cache, 64 byte line size\n"); break; case 0x68: printf("1st-level data cache: 32 KB, 4 way set associative, sectored cache, 64 byte line size\n"); break; case 0x6a: printf("uTLB: 4KByte pages, 8-way set associative, 64 entries\n"); break; case 0x6b: printf("DTLB: 4KByte pages, 8-way set associative, 256 entries\n"); break; case 0x6c: printf("DTLB: 2M/4M pages, 8-way set associative, 128 entries\n"); break; case 0x6d: printf("DTLB: 1 GByte pages, fully associative, 16 entries\n"); break; case 0x70: printf("Trace cache: 12K-uops, 8-way set associative\n"); break; case 0x71: printf("Trace cache: 16K-uops, 8-way set associative\n"); break; case 0x72: printf("Trace cache: 32K-uops, 8-way set associative\n"); break; case 0x76: printf("Instruction TLB: 2M/4M pages, fully associative, 8 entries\n"); break; case 0x78: printf("2nd-level cache: 1 MB, 4-way set associative, 64-byte line size\n"); break; case 0x79: printf("2nd-level cache: 128 KB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x7a: printf("2nd-level cache: 256 KB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x7b: printf("2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x7c: printf("2nd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x7d: printf("2nd-level cache: 2-MB, 8-way set associative, 64-byte line size\n"); break; case 0x7f: printf("2nd-level cache: 512-KB, 2-way set associative, 64-byte line size\n"); break; case 0x80: printf("2nd-level cache: 512 KByte, 8-way set associative, 64-byte line size\n"); break; case 0x82: printf("2nd-level cache: 256 KB, 8-way set associative, 32 byte line size\n"); break; case 0x83: printf("2nd-level cache: 512 KB, 8-way set associative, 32 byte line size\n"); break; case 0x84: printf("2nd-level cache: 1 MB, 8-way set associative, 32 byte line size\n"); break; case 0x85: printf("2nd-level cache: 2 MB, 8-way set associative, 32 byte line size\n"); break; case 0x86: printf("2nd-level cache: 512 KB, 4-way set associative, 64 byte line size\n"); break; case 0x87: printf("2nd-level cache: 1 MB, 8-way set associative, 64 byte line size\n"); break; case 0xa0: printf("DTLB: 4k pages, fully associative, 32 entries\n"); break; case 0xb0: printf("Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries\n"); break; case 0xb1: printf("Instruction TLB: 2M pages, 4-way, 8 entries or 4M pages, 4-way, 4 entries\n"); break; case 0xb2: printf("Instruction TLB: 4KByte pages, 4-way set associative, 64 entries\n"); break; case 0xb3: printf("Data TLB: 4 KB Pages, 4-way set associative, 128 entries\n"); break; case 0xb4: printf("Data TLB1: 4 KByte pages, 4-way associative, 256 entries\n"); break; case 0xb5: printf("Instruction TLB: 4KByte pages, 8-way set associative, 64 entries\n"); break; case 0xb6: printf("Instruction TLB: 4KByte pages, 8-way set associative, 128 entries\n"); break; case 0xba: printf("Data TLB1: 4 KByte pages, 4-way associative, 64 entries\n"); break; case 0xc0: printf("Data TLB: 4 KByte and 4 MByte pages, 4-way associative, 8 entries\n"); break; case 0xc1: printf("Shared 2nd-Level TLB: 4 KByte/2MByte pages, 8-way associative, 1024 entries\n"); break; case 0xc2: printf("DTLB: 4 KByte/2 MByte pages, 4-way associative, 16 entries\n"); break; case 0xc3: printf("Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries\n"); break; case 0xc4: printf("DTLB: 2M/4M Byte pages, 4-way associative, 32 entries\n"); break; case 0xca: printf("Shared 2nd-Level TLB: 4 KByte pages, 4-way associative, 512 entries\n"); break; case 0xd0: printf("3rd-level cache: 512 KByte, 4-way set associative, 64 byte line size\n"); break; case 0xd1: printf("3rd-level cache: 1 MByte, 4-way set associative, 64 byte line size\n"); break; case 0xd2: printf("3rd-level cache: 2 MByte, 4-way set associative, 64 byte line size\n"); break; case 0xd6: printf("3rd-level cache: 1 MByte, 8-way set associative, 64 byte line size\n"); break; case 0xd7: printf("3rd-level cache: 2 MByte, 8-way set associative, 64 byte line size\n"); break; case 0xd8: printf("3rd-level cache: 4 MByte, 8-way set associative, 64 byte line size\n"); break; case 0xdc: printf("3rd-level cache: 1.5 MByte, 12-way set associative, 64 byte line size\n"); break; case 0xdd: printf("3rd-level cache: 3 MByte, 12-way set associative, 64 byte line size\n"); break; case 0xde: printf("3rd-level cache: 6 MByte, 12-way set associative, 64 byte line size\n"); break; case 0xe2: printf("3rd-level cache: 2 MByte, 16-way set associative, 64 byte line size\n"); break; case 0xe3: printf("3rd-level cache: 4 MByte, 16-way set associative, 64 byte line size\n"); break; case 0xe4: printf("3rd-level cache: 8 MByte, 16-way set associative, 64 byte line size\n"); break; case 0xea: printf("3rd-level cache: 12MByte, 24-way set associative, 64 byte line size\n"); break; case 0xeb: printf("3rd-level cache: 18MByte, 24-way set associative, 64 byte line size\n"); break; case 0xec: printf("3rd-level cache: 24MByte, 24-way set associative, 64 byte line size\n"); break; case 0xf0: printf("64-Byte prefetching\n"); break; case 0xf1: printf("128-Byte prefetching\n"); break; } } static void print_svm_info(void) { u_int features, regs[4]; uint64_t msr; int comma; printf("\n SVM: "); do_cpuid(0x8000000A, regs); features = regs[3]; msr = rdmsr(MSR_VM_CR); if ((msr & VM_CR_SVMDIS) == VM_CR_SVMDIS) printf("(disabled in BIOS) "); if (!bootverbose) { comma = 0; if (features & (1 << 0)) { printf("%sNP", comma ? "," : ""); comma = 1; } if (features & (1 << 3)) { printf("%sNRIP", comma ? "," : ""); comma = 1; } if (features & (1 << 5)) { printf("%sVClean", comma ? "," : ""); comma = 1; } if (features & (1 << 6)) { printf("%sAFlush", comma ? "," : ""); comma = 1; } if (features & (1 << 7)) { printf("%sDAssist", comma ? "," : ""); comma = 1; } printf("%sNAsids=%d", comma ? "," : "", regs[1]); return; } printf("Features=0x%b", features, "\020" "\001NP" /* Nested paging */ "\002LbrVirt" /* LBR virtualization */ "\003SVML" /* SVM lock */ "\004NRIPS" /* NRIP save */ "\005TscRateMsr" /* MSR based TSC rate control */ "\006VmcbClean" /* VMCB clean bits */ "\007FlushByAsid" /* Flush by ASID */ "\010DecodeAssist" /* Decode assist */ "\011" "\012" "\013PauseFilter" /* PAUSE intercept filter */ "\014EncryptedMcodePatch" "\015PauseFilterThreshold" /* PAUSE filter threshold */ "\016AVIC" /* virtual interrupt controller */ "\017" "\020V_VMSAVE_VMLOAD" "\021vGIF" "\022" "\023" "\024" "\025" "\026" "\027" "\030" "\031" "\032" "\033" "\034" "\035" "\036" "\037" "\040" ); printf("\nRevision=%d, ASIDs=%d", regs[0] & 0xff, regs[1]); } #ifdef __i386__ static void print_transmeta_info(void) { u_int regs[4], nreg = 0; do_cpuid(0x80860000, regs); nreg = regs[0]; if (nreg >= 0x80860001) { do_cpuid(0x80860001, regs); printf(" Processor revision %u.%u.%u.%u\n", (regs[1] >> 24) & 0xff, (regs[1] >> 16) & 0xff, (regs[1] >> 8) & 0xff, regs[1] & 0xff); } if (nreg >= 0x80860002) { do_cpuid(0x80860002, regs); printf(" Code Morphing Software revision %u.%u.%u-%u-%u\n", (regs[1] >> 24) & 0xff, (regs[1] >> 16) & 0xff, (regs[1] >> 8) & 0xff, regs[1] & 0xff, regs[2]); } if (nreg >= 0x80860006) { char info[65]; do_cpuid(0x80860003, (u_int*) &info[0]); do_cpuid(0x80860004, (u_int*) &info[16]); do_cpuid(0x80860005, (u_int*) &info[32]); do_cpuid(0x80860006, (u_int*) &info[48]); info[64] = 0; printf(" %s\n", info); } } #endif static void print_via_padlock_info(void) { u_int regs[4]; do_cpuid(0xc0000001, regs); printf("\n VIA Padlock Features=0x%b", regs[3], "\020" "\003RNG" /* RNG */ "\007AES" /* ACE */ "\011AES-CTR" /* ACE2 */ "\013SHA1,SHA256" /* PHE */ "\015RSA" /* PMM */ ); } static uint32_t vmx_settable(uint64_t basic, int msr, int true_msr) { uint64_t val; if (basic & (1ULL << 55)) val = rdmsr(true_msr); else val = rdmsr(msr); /* Just report the controls that can be set to 1. */ return (val >> 32); } static void print_vmx_info(void) { uint64_t basic, msr; uint32_t entry, exit, mask, pin, proc, proc2; int comma; printf("\n VT-x: "); msr = rdmsr(MSR_IA32_FEATURE_CONTROL); if (!(msr & IA32_FEATURE_CONTROL_VMX_EN)) printf("(disabled in BIOS) "); basic = rdmsr(MSR_VMX_BASIC); pin = vmx_settable(basic, MSR_VMX_PINBASED_CTLS, MSR_VMX_TRUE_PINBASED_CTLS); proc = vmx_settable(basic, MSR_VMX_PROCBASED_CTLS, MSR_VMX_TRUE_PROCBASED_CTLS); if (proc & PROCBASED_SECONDARY_CONTROLS) proc2 = vmx_settable(basic, MSR_VMX_PROCBASED_CTLS2, MSR_VMX_PROCBASED_CTLS2); else proc2 = 0; exit = vmx_settable(basic, MSR_VMX_EXIT_CTLS, MSR_VMX_TRUE_EXIT_CTLS); entry = vmx_settable(basic, MSR_VMX_ENTRY_CTLS, MSR_VMX_TRUE_ENTRY_CTLS); if (!bootverbose) { comma = 0; if (exit & VM_EXIT_SAVE_PAT && exit & VM_EXIT_LOAD_PAT && entry & VM_ENTRY_LOAD_PAT) { printf("%sPAT", comma ? "," : ""); comma = 1; } if (proc & PROCBASED_HLT_EXITING) { printf("%sHLT", comma ? "," : ""); comma = 1; } if (proc & PROCBASED_MTF) { printf("%sMTF", comma ? "," : ""); comma = 1; } if (proc & PROCBASED_PAUSE_EXITING) { printf("%sPAUSE", comma ? "," : ""); comma = 1; } if (proc2 & PROCBASED2_ENABLE_EPT) { printf("%sEPT", comma ? "," : ""); comma = 1; } if (proc2 & PROCBASED2_UNRESTRICTED_GUEST) { printf("%sUG", comma ? "," : ""); comma = 1; } if (proc2 & PROCBASED2_ENABLE_VPID) { printf("%sVPID", comma ? "," : ""); comma = 1; } if (proc & PROCBASED_USE_TPR_SHADOW && proc2 & PROCBASED2_VIRTUALIZE_APIC_ACCESSES && proc2 & PROCBASED2_VIRTUALIZE_X2APIC_MODE && proc2 & PROCBASED2_APIC_REGISTER_VIRTUALIZATION && proc2 & PROCBASED2_VIRTUAL_INTERRUPT_DELIVERY) { printf("%sVID", comma ? "," : ""); comma = 1; if (pin & PINBASED_POSTED_INTERRUPT) printf(",PostIntr"); } return; } mask = basic >> 32; printf("Basic Features=0x%b", mask, "\020" "\02132PA" /* 32-bit physical addresses */ "\022SMM" /* SMM dual-monitor */ "\027INS/OUTS" /* VM-exit info for INS and OUTS */ "\030TRUE" /* TRUE_CTLS MSRs */ ); printf("\n Pin-Based Controls=0x%b", pin, "\020" "\001ExtINT" /* External-interrupt exiting */ "\004NMI" /* NMI exiting */ "\006VNMI" /* Virtual NMIs */ "\007PreTmr" /* Activate VMX-preemption timer */ "\010PostIntr" /* Process posted interrupts */ ); printf("\n Primary Processor Controls=0x%b", proc, "\020" "\003INTWIN" /* Interrupt-window exiting */ "\004TSCOff" /* Use TSC offsetting */ "\010HLT" /* HLT exiting */ "\012INVLPG" /* INVLPG exiting */ "\013MWAIT" /* MWAIT exiting */ "\014RDPMC" /* RDPMC exiting */ "\015RDTSC" /* RDTSC exiting */ "\020CR3-LD" /* CR3-load exiting */ "\021CR3-ST" /* CR3-store exiting */ "\024CR8-LD" /* CR8-load exiting */ "\025CR8-ST" /* CR8-store exiting */ "\026TPR" /* Use TPR shadow */ "\027NMIWIN" /* NMI-window exiting */ "\030MOV-DR" /* MOV-DR exiting */ "\031IO" /* Unconditional I/O exiting */ "\032IOmap" /* Use I/O bitmaps */ "\034MTF" /* Monitor trap flag */ "\035MSRmap" /* Use MSR bitmaps */ "\036MONITOR" /* MONITOR exiting */ "\037PAUSE" /* PAUSE exiting */ ); if (proc & PROCBASED_SECONDARY_CONTROLS) printf("\n Secondary Processor Controls=0x%b", proc2, "\020" "\001APIC" /* Virtualize APIC accesses */ "\002EPT" /* Enable EPT */ "\003DT" /* Descriptor-table exiting */ "\004RDTSCP" /* Enable RDTSCP */ "\005x2APIC" /* Virtualize x2APIC mode */ "\006VPID" /* Enable VPID */ "\007WBINVD" /* WBINVD exiting */ "\010UG" /* Unrestricted guest */ "\011APIC-reg" /* APIC-register virtualization */ "\012VID" /* Virtual-interrupt delivery */ "\013PAUSE-loop" /* PAUSE-loop exiting */ "\014RDRAND" /* RDRAND exiting */ "\015INVPCID" /* Enable INVPCID */ "\016VMFUNC" /* Enable VM functions */ "\017VMCS" /* VMCS shadowing */ "\020EPT#VE" /* EPT-violation #VE */ "\021XSAVES" /* Enable XSAVES/XRSTORS */ ); printf("\n Exit Controls=0x%b", mask, "\020" "\003DR" /* Save debug controls */ /* Ignore Host address-space size */ "\015PERF" /* Load MSR_PERF_GLOBAL_CTRL */ "\020AckInt" /* Acknowledge interrupt on exit */ "\023PAT-SV" /* Save MSR_PAT */ "\024PAT-LD" /* Load MSR_PAT */ "\025EFER-SV" /* Save MSR_EFER */ "\026EFER-LD" /* Load MSR_EFER */ "\027PTMR-SV" /* Save VMX-preemption timer value */ ); printf("\n Entry Controls=0x%b", mask, "\020" "\003DR" /* Save debug controls */ /* Ignore IA-32e mode guest */ /* Ignore Entry to SMM */ /* Ignore Deactivate dual-monitor treatment */ "\016PERF" /* Load MSR_PERF_GLOBAL_CTRL */ "\017PAT" /* Load MSR_PAT */ "\020EFER" /* Load MSR_EFER */ ); if (proc & PROCBASED_SECONDARY_CONTROLS && (proc2 & (PROCBASED2_ENABLE_EPT | PROCBASED2_ENABLE_VPID)) != 0) { msr = rdmsr(MSR_VMX_EPT_VPID_CAP); mask = msr; printf("\n EPT Features=0x%b", mask, "\020" "\001XO" /* Execute-only translations */ "\007PW4" /* Page-walk length of 4 */ "\011UC" /* EPT paging-structure mem can be UC */ "\017WB" /* EPT paging-structure mem can be WB */ "\0212M" /* EPT PDE can map a 2-Mbyte page */ "\0221G" /* EPT PDPTE can map a 1-Gbyte page */ "\025INVEPT" /* INVEPT is supported */ "\026AD" /* Accessed and dirty flags for EPT */ "\032single" /* INVEPT single-context type */ "\033all" /* INVEPT all-context type */ ); mask = msr >> 32; printf("\n VPID Features=0x%b", mask, "\020" "\001INVVPID" /* INVVPID is supported */ "\011individual" /* INVVPID individual-address type */ "\012single" /* INVVPID single-context type */ "\013all" /* INVVPID all-context type */ /* INVVPID single-context-retaining-globals type */ "\014single-globals" ); } } static void print_hypervisor_info(void) { if (*hv_vendor) printf("Hypervisor: Origin = \"%s\"\n", hv_vendor); }