Index: head/sys/opencrypto/cryptodev.h =================================================================== --- head/sys/opencrypto/cryptodev.h (revision 327838) +++ head/sys/opencrypto/cryptodev.h (revision 327839) @@ -1,542 +1,542 @@ /* $FreeBSD$ */ /* $OpenBSD: cryptodev.h,v 1.31 2002/06/11 11:14:29 beck Exp $ */ /*- * The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu) * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting * * This code was written by Angelos D. Keromytis in Athens, Greece, in * February 2000. Network Security Technologies Inc. (NSTI) kindly * supported the development of this code. * * Copyright (c) 2000 Angelos D. Keromytis * * Permission to use, copy, and modify this software with or without fee * is hereby granted, provided that this entire notice is included in * all source code copies of any software which is or includes a copy or * modification of this software. * * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR * PURPOSE. * * Copyright (c) 2001 Theo de Raadt * Copyright (c) 2014 The FreeBSD Foundation * All rights reserved. * * Portions of this software were developed by John-Mark Gurney * under sponsorship of the FreeBSD Foundation and * Rubicon Communications, LLC (Netgate). * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * Effort sponsored in part by the Defense Advanced Research Projects * Agency (DARPA) and Air Force Research Laboratory, Air Force * Materiel Command, USAF, under agreement number F30602-01-2-0537. * */ #ifndef _CRYPTO_CRYPTO_H_ #define _CRYPTO_CRYPTO_H_ #include #include /* Some initial values */ #define CRYPTO_DRIVERS_INITIAL 4 #define CRYPTO_SW_SESSIONS 32 /* Hash values */ #define NULL_HASH_LEN 16 #define MD5_HASH_LEN 16 #define SHA1_HASH_LEN 20 #define RIPEMD160_HASH_LEN 20 #define SHA2_256_HASH_LEN 32 #define SHA2_384_HASH_LEN 48 #define SHA2_512_HASH_LEN 64 #define MD5_KPDK_HASH_LEN 16 #define SHA1_KPDK_HASH_LEN 20 #define AES_GMAC_HASH_LEN 16 /* Maximum hash algorithm result length */ #define HASH_MAX_LEN SHA2_512_HASH_LEN /* Keep this updated */ /* HMAC values */ #define NULL_HMAC_BLOCK_LEN 64 #define MD5_HMAC_BLOCK_LEN 64 #define SHA1_HMAC_BLOCK_LEN 64 #define RIPEMD160_HMAC_BLOCK_LEN 64 #define SHA2_256_HMAC_BLOCK_LEN 64 #define SHA2_384_HMAC_BLOCK_LEN 128 #define SHA2_512_HMAC_BLOCK_LEN 128 /* Maximum HMAC block length */ #define HMAC_MAX_BLOCK_LEN SHA2_512_HMAC_BLOCK_LEN /* Keep this updated */ #define HMAC_IPAD_VAL 0x36 #define HMAC_OPAD_VAL 0x5C /* HMAC Key Length */ #define AES_128_GMAC_KEY_LEN 16 #define AES_192_GMAC_KEY_LEN 24 #define AES_256_GMAC_KEY_LEN 32 /* Encryption algorithm block sizes */ #define NULL_BLOCK_LEN 4 /* IPsec to maintain alignment */ #define DES_BLOCK_LEN 8 #define DES3_BLOCK_LEN 8 #define BLOWFISH_BLOCK_LEN 8 #define SKIPJACK_BLOCK_LEN 8 #define CAST128_BLOCK_LEN 8 #define RIJNDAEL128_BLOCK_LEN 16 #define AES_BLOCK_LEN 16 #define AES_ICM_BLOCK_LEN 1 #define ARC4_BLOCK_LEN 1 #define CAMELLIA_BLOCK_LEN 16 #define EALG_MAX_BLOCK_LEN AES_BLOCK_LEN /* Keep this updated */ /* IV Lengths */ #define ARC4_IV_LEN 1 #define AES_GCM_IV_LEN 12 #define AES_XTS_IV_LEN 8 #define AES_XTS_ALPHA 0x87 /* GF(2^128) generator polynomial */ /* Min and Max Encryption Key Sizes */ #define NULL_MIN_KEY 0 #define NULL_MAX_KEY 256 /* 2048 bits, max key */ #define DES_MIN_KEY 8 #define DES_MAX_KEY DES_MIN_KEY #define TRIPLE_DES_MIN_KEY 24 #define TRIPLE_DES_MAX_KEY TRIPLE_DES_MIN_KEY #define BLOWFISH_MIN_KEY 5 #define BLOWFISH_MAX_KEY 56 /* 448 bits, max key */ #define CAST_MIN_KEY 5 #define CAST_MAX_KEY 16 #define SKIPJACK_MIN_KEY 10 #define SKIPJACK_MAX_KEY SKIPJACK_MIN_KEY #define RIJNDAEL_MIN_KEY 16 #define RIJNDAEL_MAX_KEY 32 #define AES_MIN_KEY RIJNDAEL_MIN_KEY #define AES_MAX_KEY RIJNDAEL_MAX_KEY #define AES_XTS_MIN_KEY (2 * AES_MIN_KEY) #define AES_XTS_MAX_KEY (2 * AES_MAX_KEY) #define ARC4_MIN_KEY 1 #define ARC4_MAX_KEY 32 #define CAMELLIA_MIN_KEY 8 #define CAMELLIA_MAX_KEY 32 /* Maximum hash algorithm result length */ #define AALG_MAX_RESULT_LEN 64 /* Keep this updated */ #define CRYPTO_ALGORITHM_MIN 1 #define CRYPTO_DES_CBC 1 #define CRYPTO_3DES_CBC 2 #define CRYPTO_BLF_CBC 3 #define CRYPTO_CAST_CBC 4 #define CRYPTO_SKIPJACK_CBC 5 #define CRYPTO_MD5_HMAC 6 #define CRYPTO_SHA1_HMAC 7 #define CRYPTO_RIPEMD160_HMAC 8 #define CRYPTO_MD5_KPDK 9 #define CRYPTO_SHA1_KPDK 10 #define CRYPTO_RIJNDAEL128_CBC 11 /* 128 bit blocksize */ #define CRYPTO_AES_CBC 11 /* 128 bit blocksize -- the same as above */ #define CRYPTO_ARC4 12 #define CRYPTO_MD5 13 #define CRYPTO_SHA1 14 #define CRYPTO_NULL_HMAC 15 #define CRYPTO_NULL_CBC 16 #define CRYPTO_DEFLATE_COMP 17 /* Deflate compression algorithm */ #define CRYPTO_SHA2_256_HMAC 18 #define CRYPTO_SHA2_384_HMAC 19 #define CRYPTO_SHA2_512_HMAC 20 #define CRYPTO_CAMELLIA_CBC 21 #define CRYPTO_AES_XTS 22 #define CRYPTO_AES_ICM 23 /* commonly known as CTR mode */ #define CRYPTO_AES_NIST_GMAC 24 /* cipher side */ #define CRYPTO_AES_NIST_GCM_16 25 /* 16 byte ICV */ #define CRYPTO_AES_128_NIST_GMAC 26 /* auth side */ #define CRYPTO_AES_192_NIST_GMAC 27 /* auth side */ #define CRYPTO_AES_256_NIST_GMAC 28 /* auth side */ #define CRYPTO_ALGORITHM_MAX 28 /* Keep updated - see below */ #define CRYPTO_ALGO_VALID(x) ((x) >= CRYPTO_ALGORITHM_MIN && \ (x) <= CRYPTO_ALGORITHM_MAX) /* Algorithm flags */ #define CRYPTO_ALG_FLAG_SUPPORTED 0x01 /* Algorithm is supported */ #define CRYPTO_ALG_FLAG_RNG_ENABLE 0x02 /* Has HW RNG for DH/DSA */ #define CRYPTO_ALG_FLAG_DSA_SHA 0x04 /* Can do SHA on msg */ /* * Crypto driver/device flags. They can set in the crid * parameter when creating a session or submitting a key * op to affect the device/driver assigned. If neither * of these are specified then the crid is assumed to hold * the driver id of an existing (and suitable) device that * must be used to satisfy the request. */ #define CRYPTO_FLAG_HARDWARE 0x01000000 /* hardware accelerated */ #define CRYPTO_FLAG_SOFTWARE 0x02000000 /* software implementation */ /* NB: deprecated */ struct session_op { u_int32_t cipher; /* ie. CRYPTO_DES_CBC */ u_int32_t mac; /* ie. CRYPTO_MD5_HMAC */ u_int32_t keylen; /* cipher key */ c_caddr_t key; int mackeylen; /* mac key */ c_caddr_t mackey; u_int32_t ses; /* returns: session # */ }; struct session2_op { u_int32_t cipher; /* ie. CRYPTO_DES_CBC */ u_int32_t mac; /* ie. CRYPTO_MD5_HMAC */ u_int32_t keylen; /* cipher key */ c_caddr_t key; int mackeylen; /* mac key */ c_caddr_t mackey; u_int32_t ses; /* returns: session # */ int crid; /* driver id + flags (rw) */ int pad[4]; /* for future expansion */ }; struct crypt_op { u_int32_t ses; u_int16_t op; /* i.e. COP_ENCRYPT */ #define COP_ENCRYPT 1 #define COP_DECRYPT 2 u_int16_t flags; #define COP_F_CIPHER_FIRST 0x0001 /* Cipher before MAC. */ #define COP_F_BATCH 0x0008 /* Batch op if possible */ u_int len; c_caddr_t src; /* become iov[] inside kernel */ caddr_t dst; caddr_t mac; /* must be big enough for chosen MAC */ c_caddr_t iv; }; /* op and flags the same as crypt_op */ struct crypt_aead { u_int32_t ses; u_int16_t op; /* i.e. COP_ENCRYPT */ u_int16_t flags; u_int len; u_int aadlen; u_int ivlen; c_caddr_t src; /* become iov[] inside kernel */ caddr_t dst; c_caddr_t aad; /* additional authenticated data */ caddr_t tag; /* must fit for chosen TAG length */ c_caddr_t iv; }; /* * Parameters for looking up a crypto driver/device by * device name or by id. The latter are returned for * created sessions (crid) and completed key operations. */ struct crypt_find_op { int crid; /* driver id + flags */ char name[32]; /* device/driver name */ }; /* bignum parameter, in packed bytes, ... */ struct crparam { caddr_t crp_p; u_int crp_nbits; }; #define CRK_MAXPARAM 8 struct crypt_kop { u_int crk_op; /* ie. CRK_MOD_EXP or other */ u_int crk_status; /* return status */ u_short crk_iparams; /* # of input parameters */ u_short crk_oparams; /* # of output parameters */ u_int crk_crid; /* NB: only used by CIOCKEY2 (rw) */ struct crparam crk_param[CRK_MAXPARAM]; }; #define CRK_ALGORITM_MIN 0 #define CRK_MOD_EXP 0 #define CRK_MOD_EXP_CRT 1 #define CRK_DSA_SIGN 2 #define CRK_DSA_VERIFY 3 #define CRK_DH_COMPUTE_KEY 4 #define CRK_ALGORITHM_MAX 4 /* Keep updated - see below */ #define CRF_MOD_EXP (1 << CRK_MOD_EXP) #define CRF_MOD_EXP_CRT (1 << CRK_MOD_EXP_CRT) #define CRF_DSA_SIGN (1 << CRK_DSA_SIGN) #define CRF_DSA_VERIFY (1 << CRK_DSA_VERIFY) #define CRF_DH_COMPUTE_KEY (1 << CRK_DH_COMPUTE_KEY) /* * done against open of /dev/crypto, to get a cloned descriptor. * Please use F_SETFD against the cloned descriptor. */ #define CRIOGET _IOWR('c', 100, u_int32_t) #define CRIOASYMFEAT CIOCASYMFEAT #define CRIOFINDDEV CIOCFINDDEV /* the following are done against the cloned descriptor */ #define CIOCGSESSION _IOWR('c', 101, struct session_op) #define CIOCFSESSION _IOW('c', 102, u_int32_t) #define CIOCCRYPT _IOWR('c', 103, struct crypt_op) #define CIOCKEY _IOWR('c', 104, struct crypt_kop) #define CIOCASYMFEAT _IOR('c', 105, u_int32_t) #define CIOCGSESSION2 _IOWR('c', 106, struct session2_op) #define CIOCKEY2 _IOWR('c', 107, struct crypt_kop) #define CIOCFINDDEV _IOWR('c', 108, struct crypt_find_op) #define CIOCCRYPTAEAD _IOWR('c', 109, struct crypt_aead) struct cryptotstat { struct timespec acc; /* total accumulated time */ struct timespec min; /* min time */ struct timespec max; /* max time */ u_int32_t count; /* number of observations */ }; struct cryptostats { u_int32_t cs_ops; /* symmetric crypto ops submitted */ u_int32_t cs_errs; /* symmetric crypto ops that failed */ u_int32_t cs_kops; /* asymetric/key ops submitted */ u_int32_t cs_kerrs; /* asymetric/key ops that failed */ u_int32_t cs_intrs; /* crypto swi thread activations */ u_int32_t cs_rets; /* crypto return thread activations */ u_int32_t cs_blocks; /* symmetric op driver block */ u_int32_t cs_kblocks; /* symmetric op driver block */ /* * When CRYPTO_TIMING is defined at compile time and the * sysctl debug.crypto is set to 1, the crypto system will * accumulate statistics about how long it takes to process * crypto requests at various points during processing. */ struct cryptotstat cs_invoke; /* crypto_dipsatch -> crypto_invoke */ struct cryptotstat cs_done; /* crypto_invoke -> crypto_done */ struct cryptotstat cs_cb; /* crypto_done -> callback */ struct cryptotstat cs_finis; /* callback -> callback return */ }; #ifdef _KERNEL #if 0 #define CRYPTDEB(s) do { printf("%s:%d: %s\n", __FILE__, __LINE__, s); \ } while (0) #else #define CRYPTDEB(s) do { } while (0) #endif /* Standard initialization structure beginning */ struct cryptoini { int cri_alg; /* Algorithm to use */ int cri_klen; /* Key length, in bits */ int cri_mlen; /* Number of bytes we want from the entire hash. 0 means all. */ caddr_t cri_key; /* key to use */ u_int8_t cri_iv[EALG_MAX_BLOCK_LEN]; /* IV to use */ struct cryptoini *cri_next; }; /* Describe boundaries of a single crypto operation */ struct cryptodesc { int crd_skip; /* How many bytes to ignore from start */ int crd_len; /* How many bytes to process */ int crd_inject; /* Where to inject results, if applicable */ int crd_flags; #define CRD_F_ENCRYPT 0x01 /* Set when doing encryption */ #define CRD_F_IV_PRESENT 0x02 /* When encrypting, IV is already in place, so don't copy. */ #define CRD_F_IV_EXPLICIT 0x04 /* IV explicitly provided */ #define CRD_F_DSA_SHA_NEEDED 0x08 /* Compute SHA-1 of buffer for DSA */ #define CRD_F_COMP 0x0f /* Set when doing compression */ #define CRD_F_KEY_EXPLICIT 0x10 /* Key explicitly provided */ struct cryptoini CRD_INI; /* Initialization/context data */ #define crd_esn CRD_INI.cri_esn #define crd_iv CRD_INI.cri_iv #define crd_key CRD_INI.cri_key #define crd_alg CRD_INI.cri_alg #define crd_klen CRD_INI.cri_klen struct cryptodesc *crd_next; }; /* Structure describing complete operation */ struct cryptop { TAILQ_ENTRY(cryptop) crp_next; struct task crp_task; u_int64_t crp_sid; /* Session ID */ int crp_ilen; /* Input data total length */ int crp_olen; /* Result total length */ int crp_etype; /* * Error type (zero means no error). * All error codes except EAGAIN * indicate possible data corruption (as in, * the data have been touched). On all * errors, the crp_sid may have changed * (reset to a new one), so the caller * should always check and use the new * value on future requests. */ int crp_flags; #define CRYPTO_F_IMBUF 0x0001 /* Input/output are mbuf chains */ #define CRYPTO_F_IOV 0x0002 /* Input/output are uio */ #define CRYPTO_F_BATCH 0x0008 /* Batch op if possible */ #define CRYPTO_F_CBIMM 0x0010 /* Do callback immediately */ #define CRYPTO_F_DONE 0x0020 /* Operation completed */ #define CRYPTO_F_CBIFSYNC 0x0040 /* Do CBIMM if op is synchronous */ #define CRYPTO_F_ASYNC 0x0080 /* Dispatch crypto jobs on several threads * if op is synchronous */ #define CRYPTO_F_ASYNC_KEEPORDER 0x0100 /* * Dispatch the crypto jobs in the same * order there are submitted. Applied only * if CRYPTO_F_ASYNC flags is set */ caddr_t crp_buf; /* Data to be processed */ - caddr_t crp_opaque; /* Opaque pointer, passed along */ + void * crp_opaque; /* Opaque pointer, passed along */ struct cryptodesc *crp_desc; /* Linked list of processing descriptors */ int (*crp_callback)(struct cryptop *); /* Callback function */ struct bintime crp_tstamp; /* performance time stamp */ uint32_t crp_seq; /* used for ordered dispatch */ uint32_t crp_retw_id; /* * the return worker to be used, * used for ordered dispatch */ }; #define CRYPTOP_ASYNC(crp) \ (((crp)->crp_flags & CRYPTO_F_ASYNC) && \ CRYPTO_SESID2CAPS((crp)->crp_sid) & CRYPTOCAP_F_SYNC) #define CRYPTOP_ASYNC_KEEPORDER(crp) \ (CRYPTOP_ASYNC(crp) && \ (crp)->crp_flags & CRYPTO_F_ASYNC_KEEPORDER) #define CRYPTO_BUF_CONTIG 0x0 #define CRYPTO_BUF_IOV 0x1 #define CRYPTO_BUF_MBUF 0x2 #define CRYPTO_OP_DECRYPT 0x0 #define CRYPTO_OP_ENCRYPT 0x1 /* * Hints passed to process methods. */ #define CRYPTO_HINT_MORE 0x1 /* more ops coming shortly */ struct cryptkop { TAILQ_ENTRY(cryptkop) krp_next; u_int krp_op; /* ie. CRK_MOD_EXP or other */ u_int krp_status; /* return status */ u_short krp_iparams; /* # of input parameters */ u_short krp_oparams; /* # of output parameters */ u_int krp_crid; /* desired device, etc. */ u_int32_t krp_hid; struct crparam krp_param[CRK_MAXPARAM]; /* kvm */ int (*krp_callback)(struct cryptkop *); }; /* * Session ids are 64 bits. The lower 32 bits contain a "local id" which * is a driver-private session identifier. The upper 32 bits contain a * "hardware id" used by the core crypto code to identify the driver and * a copy of the driver's capabilities that can be used by client code to * optimize operation. */ #define CRYPTO_SESID2HID(_sid) (((_sid) >> 32) & 0x00ffffff) #define CRYPTO_SESID2CAPS(_sid) (((_sid) >> 32) & 0xff000000) #define CRYPTO_SESID2LID(_sid) (((u_int32_t) (_sid)) & 0xffffffff) MALLOC_DECLARE(M_CRYPTO_DATA); extern int crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int hard); extern int crypto_freesession(u_int64_t sid); #define CRYPTOCAP_F_HARDWARE CRYPTO_FLAG_HARDWARE #define CRYPTOCAP_F_SOFTWARE CRYPTO_FLAG_SOFTWARE #define CRYPTOCAP_F_SYNC 0x04000000 /* operates synchronously */ extern int32_t crypto_get_driverid(device_t dev, int flags); extern int crypto_find_driver(const char *); extern device_t crypto_find_device_byhid(int hid); extern int crypto_getcaps(int hid); extern int crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen, u_int32_t flags); extern int crypto_kregister(u_int32_t, int, u_int32_t); extern int crypto_unregister(u_int32_t driverid, int alg); extern int crypto_unregister_all(u_int32_t driverid); extern int crypto_dispatch(struct cryptop *crp); extern int crypto_kdispatch(struct cryptkop *); #define CRYPTO_SYMQ 0x1 #define CRYPTO_ASYMQ 0x2 extern int crypto_unblock(u_int32_t, int); extern void crypto_done(struct cryptop *crp); extern void crypto_kdone(struct cryptkop *); extern int crypto_getfeat(int *); extern void crypto_freereq(struct cryptop *crp); extern struct cryptop *crypto_getreq(int num); extern int crypto_usercrypto; /* userland may do crypto requests */ extern int crypto_userasymcrypto; /* userland may do asym crypto reqs */ extern int crypto_devallowsoft; /* only use hardware crypto */ /* * Crypto-related utility routines used mainly by drivers. * * XXX these don't really belong here; but for now they're * kept apart from the rest of the system. */ struct uio; extern void cuio_copydata(struct uio* uio, int off, int len, caddr_t cp); extern void cuio_copyback(struct uio* uio, int off, int len, c_caddr_t cp); extern int cuio_getptr(struct uio *uio, int loc, int *off); extern int cuio_apply(struct uio *uio, int off, int len, int (*f)(void *, void *, u_int), void *arg); struct mbuf; struct iovec; extern int crypto_mbuftoiov(struct mbuf *mbuf, struct iovec **iovptr, int *cnt, int *allocated); extern void crypto_copyback(int flags, caddr_t buf, int off, int size, c_caddr_t in); extern void crypto_copydata(int flags, caddr_t buf, int off, int size, caddr_t out); extern int crypto_apply(int flags, caddr_t buf, int off, int len, int (*f)(void *, void *, u_int), void *arg); #endif /* _KERNEL */ #endif /* _CRYPTO_CRYPTO_H_ */