Index: stable/11/UPDATING =================================================================== --- stable/11/UPDATING (revision 327836) +++ stable/11/UPDATING (revision 327837) @@ -1,1720 +1,1726 @@ Updating Information for FreeBSD current users. This file is maintained and copyrighted by M. Warner Losh . See end of file for further details. For commonly done items, please see the COMMON ITEMS: section later in the file. These instructions assume that you basically know what you are doing. If not, then please consult the FreeBSD handbook: https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/updating-src.html Items affecting the ports and packages system can be found in /usr/ports/UPDATING. Please read that file before running portupgrade. NOTE: FreeBSD has switched from gcc to clang. If you have trouble bootstrapping from older versions of FreeBSD, try WITHOUT_CLANG and WITH_GCC to bootstrap to the tip of head, and then rebuild without this option. The bootstrap process from older version of current across the gcc/clang cutover is a bit fragile. +20180108: + lint(1) binaries and library are no longer built by default. To + enable building them, define WITH_LINT in src.conf. If you are using + a FreeBSD 12 or later system to build 11-stable, you may need to + install a lint(1) binary to use WITH_LINT. + 20171003: When building multiple kernels using KERNCONF, non-existent KERNCONF files will produce an error and buildkernel will fail. Previously missing KERNCONF files silently failed giving no indication as to why, only to subsequently discover during installkernel that the desired kernel was never built in the first place. 20170926: Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 5.0.0. Please see the 20141231 entry below for information about prerequisites and upgrading, if you are not already using clang 3.5.0 or higher. 20170822: Since the switch to GPT disk labels, fsck for UFS/FFS has been unable to automatically find alternate superblocks. As of r322806, the information needed to find alternate superblocks has been moved to the end of the area reserved for the boot block. Filesystems created with a newfs of this vintage or later will create the recovery information. If you have a filesystem created prior to this change and wish to have a recovery block created for your filesystem, you can do so by running fsck in forground mode (i.e., do not use the -p or -y options). As it starts, fsck will ask ``SAVE DATA TO FIND ALTERNATE SUPERBLOCKS'' to which you should answer yes. 20170518: arm64 builds now use the base system LLD 4.0.0 linker by default, instead of requiring that the aarch64-binutils port or package be installed. To continue using aarch64-binutils, set CROSS_BINUTILS_PREFIX=/usr/local/aarch64-freebsd/bin . 20170529: The ctl.ko module no longer implements the iSCSI target frontend: cfiscsi.ko does instead. If building cfiscsi.ko as a kernel module, the module can be loaded via one of the following methods: - `cfiscsi_load="YES"` in loader.conf(5). - Add `cfiscsi` to `$kld_list` in rc.conf(5). - ctladm(8)/ctld(8), when compiled with iSCSI support (`WITH_ISCSI=yes` in src.conf(5)) Please see cfiscsi(4) for more details. 20170511: The mmcsd.ko module now additionally depends on geom_flashmap.ko. Also, mmc.ko and mmcsd.ko need to be a matching pair built from the same source (previously, the dependency of mmcsd.ko on mmc.ko was missing, but mmcsd.ko now will refuse to load if it is incompatible with mmc.ko). 20170414: Binds and sends to the loopback addresses, IPv6 and IPv4, will now use any explicitly assigned loopback address available in the jail instead of using the first assigned address of the jail. 20170413: As of r316810 for ipfilter, keep frags is no longer assumed when keep state is specified in a rule. r316810 aligns ipfilter with documentation in man pages separating keep frags from keep state. This allows keep state to specified without forcing keep frags and allows keep frags to be specified independently of keep state. To maintain previous behaviour, also specify keep frags with keep state (as documented in ipf.conf.5). 20170402: Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 4.0.0. Please see the 20141231 entry below for information about prerequisites and upgrading, if you are not already using clang 3.5.0 or higher. 20170323: The code that provides support for ZFS .zfs/ directory functionality has been reimplemented. It's not possible now to create a snapshot by mkdir under .zfs/snapshot/. That should be the only user visible change. 20170319: Many changes in the IPsec code have been merged from the FreeBSD-CURRENT branch. The IPSEC_FILTERTUNNEL kernel option is removed in favour of corresponding sysctl. The IPSEC_NAT_T kernel option is also removed, and now NAT-T is supported by default. Security associations now use the single namespace for SPI allocation, so if you use several manually configured security associations with the same SPI, this configuration needs modification. 20161217: Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 3.9.1. Please see the 20141231 entry below for information about prerequisites and upgrading, if you are not already using clang 3.5.0 or higher. 20161124: Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 3.9.0. Please see the 20141231 entry below for information about prerequisites and upgrading, if you are not already using clang 3.5.0 or higher. 20161119: The layout of the pmap structure has changed for powerpc to put the pmap statistics at the front for all CPU variations. libkvm(3) and all tools that link against it need to be recompiled. 20161030: isl(4) and cyapa(4) drivers now require a new driver, chromebook_platform(4), to work properly on Chromebook-class hardware. On other types of hardware the drivers may need to be configured using device hints. Please see the corresponding manual pages for details. 20161210: Relocatable object files with the extension of .So have been renamed to use an extension of .pico instead. The purpose of this change is to avoid a name clash with shared libraries on case-insensitive file systems. On those file systems, foo.So is the same file as foo.so. 20160622: The libc stub for the pipe(2) system call has been replaced with a wrapper that calls the pipe2(2) system call and the pipe(2) system call is now only implemented by the kernels that include "options COMPAT_FREEBSD10" in their config file (this is the default). Users should ensure that this option is enabled in their kernel or upgrade userspace to r302092 before upgrading their kernel. 20160527: CAM will now strip leading spaces from SCSI disks' serial numbers. This will effect users who create UFS filesystems on SCSI disks using those disk's diskid device nodes. For example, if /etc/fstab previously contained a line like "/dev/diskid/DISK-%20%20%20%20%20%20%20ABCDEFG0123456", you should change it to "/dev/diskid/DISK-ABCDEFG0123456". Users of geom transforms like gmirror may also be affected. ZFS users should generally be fine. 20160523: The bitstring(3) API has been updated with new functionality and improved performance. But it is binary-incompatible with the old API. Objects built with the new headers may not be linked against objects built with the old headers. 20160520: The brk and sbrk functions have been removed from libc on arm64. Binutils from ports has been updated to not link to these functions and should be updated to the latest version before installing a new libc. 20160517: The armv6 port now defaults to hard float ABI. Limited support for running both hardfloat and soft float on the same system is available using the libraries installed with -DWITH_LIBSOFT. This has only been tested as an upgrade path for installworld and packages may fail or need manual intervention to run. New packages will be needed. To update an existing self-hosted armv6hf system, you must add TARGET_ARCH=armv6 on the make command line for both the build and the install steps. 20160510: Kernel modules compiled outside of a kernel build now default to installing to /boot/modules instead of /boot/kernel. Many kernel modules built this way (such as those in ports) already overrode KMODDIR explicitly to install into /boot/modules. However, manually building and installing a module from /sys/modules will now install to /boot/modules instead of /boot/kernel. 20160414: The CAM I/O scheduler has been committed to the kernel. There should be no user visible impact. This does enable NCQ Trim on ada SSDs. While the list of known rogues that claim support for this but actually corrupt data is believed to be complete, be on the lookout for data corruption. The known rogue list is believed to be complete: o Crucial MX100, M550 drives with MU01 firmware. o Micron M510 and M550 drives with MU01 firmware. o Micron M500 prior to MU07 firmware o Samsung 830, 840, and 850 all firmwares o FCCT M500 all firmwares Crucial has firmware http://www.crucial.com/usa/en/support-ssd-firmware with working NCQ TRIM. For Micron branded drives, see your sales rep for updated firmware. Black listed drives will work correctly because these drives work correctly so long as no NCQ TRIMs are sent to them. Given this list is the same as found in Linux, it's believed there are no other rogues in the market place. All other models from the above vendors work. To be safe, if you are at all concerned, you can quirk each of your drives to prevent NCQ from being sent by setting: kern.cam.ada.X.quirks="0x2" in loader.conf. If the drive requires the 4k sector quirk, set the quirks entry to 0x3. 20160330: The FAST_DEPEND build option has been removed and its functionality is now the one true way. The old mkdep(1) style of 'make depend' has been removed. See 20160311 for further details. 20160317: Resource range types have grown from unsigned long to uintmax_t. All drivers, and anything using libdevinfo, need to be recompiled. 20160311: WITH_FAST_DEPEND is now enabled by default for in-tree and out-of-tree builds. It no longer runs mkdep(1) during 'make depend', and the 'make depend' stage can safely be skipped now as it is auto ran when building 'make all' and will generate all SRCS and DPSRCS before building anything else. Dependencies are gathered at compile time with -MF flags kept in separate .depend files per object file. Users should run 'make cleandepend' once if using -DNO_CLEAN to clean out older stale .depend files. 20160306: On amd64, clang 3.8.0 can now insert sections of type AMD64_UNWIND into kernel modules. Therefore, if you load any kernel modules at boot time, please install the boot loaders after you install the kernel, but before rebooting, e.g.: make buildworld make kernel KERNCONF=YOUR_KERNEL_HERE make -C sys/boot install Then follow the usual steps, described in the General Notes section, below. 20160305: Clang, llvm, lldb and compiler-rt have been upgraded to 3.8.0. Please see the 20141231 entry below for information about prerequisites and upgrading, if you are not already using clang 3.5.0 or higher. 20160301: The AIO subsystem is now a standard part of the kernel. The VFS_AIO kernel option and aio.ko kernel module have been removed. Due to stability concerns, asynchronous I/O requests are only permitted on sockets and raw disks by default. To enable asynchronous I/O requests on all file types, set the vfs.aio.enable_unsafe sysctl to a non-zero value. 20160226: The ELF object manipulation tool objcopy is now provided by the ELF Tool Chain project rather than by GNU binutils. It should be a drop-in replacement, with the addition of arm64 support. The (temporary) src.conf knob WITHOUT_ELFCOPY_AS_OBJCOPY knob may be set to obtain the GNU version if necessary. 20160129: Building ZFS pools on top of zvols is prohibited by default. That feature has never worked safely; it's always been prone to deadlocks. Using a zvol as the backing store for a VM guest's virtual disk will still work, even if the guest is using ZFS. Legacy behavior can be restored by setting vfs.zfs.vol.recursive=1. 20160119: The NONE and HPN patches has been removed from OpenSSH. They are still available in the security/openssh-portable port. 20160113: With the addition of ypldap(8), a new _ypldap user is now required during installworld. "mergemaster -p" can be used to add the user prior to installworld, as documented in the handbook. 20151216: The tftp loader (pxeboot) now uses the option root-path directive. As a consequence it no longer looks for a pxeboot.4th file on the tftp server. Instead it uses the regular /boot infrastructure as with the other loaders. 20151211: The code to start recording plug and play data into the modules has been committed. While the old tools will properly build a new kernel, a number of warnings about "unknown metadata record 4" will be produced for an older kldxref. To avoid such warnings, make sure to rebuild the kernel toolchain (or world). Make sure that you have r292078 or later when trying to build 292077 or later before rebuilding. 20151207: Debug data files are now built by default with 'make buildworld' and installed with 'make installworld'. This facilitates debugging but requires more disk space both during the build and for the installed world. Debug files may be disabled by setting WITHOUT_DEBUG_FILES=yes in src.conf(5). 20151130: r291527 changed the internal interface between the nfsd.ko and nfscommon.ko modules. As such, they must both be upgraded to-gether. __FreeBSD_version has been bumped because of this. 20151108: Add support for unicode collation strings leads to a change of order of files listed by ls(1) for example. To get back to the old behaviour, set LC_COLLATE environment variable to "C". Databases administrators will need to reindex their databases given collation results will be different. Due to a bug in install(1) it is recommended to remove the ancient locales before running make installworld. rm -rf /usr/share/locale/* 20151030: The OpenSSL has been upgraded to 1.0.2d. Any binaries requiring libcrypto.so.7 or libssl.so.7 must be recompiled. 20151020: Qlogic 24xx/25xx firmware images were updated from 5.5.0 to 7.3.0. Kernel modules isp_2400_multi and isp_2500_multi were removed and should be replaced with isp_2400 and isp_2500 modules respectively. 20151017: The build previously allowed using 'make -n' to not recurse into sub-directories while showing what commands would be executed, and 'make -n -n' to recursively show commands. Now 'make -n' will recurse and 'make -N' will not. 20151012: If you specify SENDMAIL_MC or SENDMAIL_CF in make.conf, mergemaster and etcupdate will now use this file. A custom sendmail.cf is now updated via this mechanism rather than via installworld. If you had excluded sendmail.cf in mergemaster.rc or etcupdate.conf, you may want to remove the exclusion or change it to "always install". /etc/mail/sendmail.cf is now managed the same way regardless of whether SENDMAIL_MC/SENDMAIL_CF is used. If you are not using SENDMAIL_MC/SENDMAIL_CF there should be no change in behavior. 20151011: Compatibility shims for legacy ATA device names have been removed. It includes ATA_STATIC_ID kernel option, kern.cam.ada.legacy_aliases and kern.geom.raid.legacy_aliases loader tunables, kern.devalias.* environment variables, /dev/ad* and /dev/ar* symbolic links. 20151006: Clang, llvm, lldb, compiler-rt and libc++ have been upgraded to 3.7.0. Please see the 20141231 entry below for information about prerequisites and upgrading, if you are not already using clang 3.5.0 or higher. 20150924: Kernel debug files have been moved to /usr/lib/debug/boot/kernel/, and renamed from .symbols to .debug. This reduces the size requirements on the boot partition or file system and provides consistency with userland debug files. When using the supported kernel installation method the /usr/lib/debug/boot/kernel directory will be renamed (to kernel.old) as is done with /boot/kernel. Developers wishing to maintain the historical behavior of installing debug files in /boot/kernel/ can set KERN_DEBUGDIR="" in src.conf(5). 20150827: The wireless drivers had undergone changes that remove the 'parent interface' from the ifconfig -l output. The rc.d network scripts used to check presence of a parent interface in the list, so old scripts would fail to start wireless networking. Thus, etcupdate(3) or mergemaster(8) run is required after kernel update, to update your rc.d scripts in /etc. 20150827: pf no longer supports 'scrub fragment crop' or 'scrub fragment drop-ovl' These configurations are now automatically interpreted as 'scrub fragment reassemble'. 20150817: Kernel-loadable modules for the random(4) device are back. To use them, the kernel must have device random options RANDOM_LOADABLE kldload(8) can then be used to load random_fortuna.ko or random_yarrow.ko. Please note that due to the indirect function calls that the loadable modules need to provide, the build-in variants will be slightly more efficient. The random(4) kernel option RANDOM_DUMMY has been retired due to unpopularity. It was not all that useful anyway. 20150813: The WITHOUT_ELFTOOLCHAIN_TOOLS src.conf(5) knob has been retired. Control over building the ELF Tool Chain tools is now provided by the WITHOUT_TOOLCHAIN knob. 20150810: The polarity of Pulse Per Second (PPS) capture events with the uart(4) driver has been corrected. Prior to this change the PPS "assert" event corresponded to the trailing edge of a positive PPS pulse and the "clear" event was the leading edge of the next pulse. As the width of a PPS pulse in a typical GPS receiver is on the order of 1 millisecond, most users will not notice any significant difference with this change. Anyone who has compensated for the historical polarity reversal by configuring a negative offset equal to the pulse width will need to remove that workaround. 20150809: The default group assigned to /dev/dri entries has been changed from 'wheel' to 'video' with the id of '44'. If you want to have access to the dri devices please add yourself to the video group with: # pw groupmod video -m $USER 20150806: The menu.rc and loader.rc files will now be replaced during upgrades. Please migrate local changes to menu.rc.local and loader.rc.local instead. 20150805: GNU Binutils versions of addr2line, c++filt, nm, readelf, size, strings and strip have been removed. The src.conf(5) knob WITHOUT_ELFTOOLCHAIN_TOOLS no longer provides the binutils tools. 20150728: As ZFS requires more kernel stack pages than is the default on some architectures e.g. i386, it now warns if KSTACK_PAGES is less than ZFS_MIN_KSTACK_PAGES (which is 4 at the time of writing). Please consider using 'options KSTACK_PAGES=X' where X is greater than or equal to ZFS_MIN_KSTACK_PAGES i.e. 4 in such configurations. 20150706: sendmail has been updated to 8.15.2. Starting with FreeBSD 11.0 and sendmail 8.15, sendmail uses uncompressed IPv6 addresses by default, i.e., they will not contain "::". For example, instead of ::1, it will be 0:0:0:0:0:0:0:1. This permits a zero subnet to have a more specific match, such as different map entries for IPv6:0:0 vs IPv6:0. This change requires that configuration data (including maps, files, classes, custom ruleset, etc.) must use the same format, so make certain such configuration data is upgrading. As a very simple check search for patterns like 'IPv6:[0-9a-fA-F:]*::' and 'IPv6::'. To return to the old behavior, set the m4 option confUSE_COMPRESSED_IPV6_ADDRESSES or the cf option UseCompressedIPv6Addresses. 20150630: The default kernel entropy-processing algorithm is now Fortuna, replacing Yarrow. Assuming you have 'device random' in your kernel config file, the configurations allow a kernel option to override this default. You may choose *ONE* of: options RANDOM_YARROW # Legacy /dev/random algorithm. options RANDOM_DUMMY # Blocking-only driver. If you have neither, you get Fortuna. For most people, read no further, Fortuna will give a /dev/random that works like it always used to, and the difference will be irrelevant. If you remove 'device random', you get *NO* kernel-processed entropy at all. This may be acceptable to folks building embedded systems, but has complications. Carry on reading, and it is assumed you know what you need. *PLEASE* read random(4) and random(9) if you are in the habit of tweaking kernel configs, and/or if you are a member of the embedded community, wanting specific and not-usual behaviour from your security subsystems. NOTE!! If you use RANDOM_DUMMY and/or have no 'device random', you will NOT have a functioning /dev/random, and many cryptographic features will not work, including SSH. You may also find strange behaviour from the random(3) set of library functions, in particular sranddev(3), srandomdev(3) and arc4random(3). The reason for this is that the KERN_ARND sysctl only returns entropy if it thinks it has some to share, and with RANDOM_DUMMY or no 'device random' this will never happen. 20150623: An additional fix for the issue described in the 20150614 sendmail entry below has been been committed in revision 284717. 20150616: FreeBSD's old make (fmake) has been removed from the system. It is available as the devel/fmake port or via pkg install fmake. 20150615: The fix for the issue described in the 20150614 sendmail entry below has been been committed in revision 284436. The work around described in that entry is no longer needed unless the default setting is overridden by a confDH_PARAMETERS configuration setting of '5' or pointing to a 512 bit DH parameter file. 20150614: ALLOW_DEPRECATED_ATF_TOOLS/ATFFILE support has been removed from atf.test.mk (included from bsd.test.mk). Please upgrade devel/atf and devel/kyua to version 0.20+ and adjust any calling code to work with Kyuafile and kyua. 20150614: The import of openssl to address the FreeBSD-SA-15:10.openssl security advisory includes a change which rejects handshakes with DH parameters below 768 bits. sendmail releases prior to 8.15.2 (not yet released), defaulted to a 512 bit DH parameter setting for client connections. To work around this interoperability, sendmail can be configured to use a 2048 bit DH parameter by: 1. Edit /etc/mail/`hostname`.mc 2. If a setting for confDH_PARAMETERS does not exist or exists and is set to a string beginning with '5', replace it with '2'. 3. If a setting for confDH_PARAMETERS exists and is set to a file path, create a new file with: openssl dhparam -out /path/to/file 2048 4. Rebuild the .cf file: cd /etc/mail/; make; make install 5. Restart sendmail: cd /etc/mail/; make restart A sendmail patch is coming, at which time this file will be updated. 20150604: Generation of legacy formatted entries have been disabled by default in pwd_mkdb(8), as all base system consumers of the legacy formatted entries were converted to use the new format by default when the new, machine independent format have been added and supported since FreeBSD 5.x. Please see the pwd_mkdb(8) manual page for further details. 20150525: Clang and llvm have been upgraded to 3.6.1 release. Please see the 20141231 entry below for information about prerequisites and upgrading, if you are not already using 3.5.0 or higher. 20150521: TI platform code switched to using vendor DTS files and this update may break existing systems running on Beaglebone, Beaglebone Black, and Pandaboard: - dtb files should be regenerated/reinstalled. Filenames are the same but content is different now - GPIO addressing was changed, now each GPIO bank (32 pins per bank) has its own /dev/gpiocX device, e.g. pin 121 on /dev/gpioc0 in old addressing scheme is now pin 25 on /dev/gpioc3. - Pandaboard: /etc/ttys should be updated, serial console device is now /dev/ttyu2, not /dev/ttyu0 20150501: soelim(1) from gnu/usr.bin/groff has been replaced by usr.bin/soelim. If you need the GNU extension from groff soelim(1), install groff from package: pkg install groff, or via ports: textproc/groff. 20150423: chmod, chflags, chown and chgrp now affect symlinks in -R mode as defined in symlink(7); previously symlinks were silently ignored. 20150415: The const qualifier has been removed from iconv(3) to comply with POSIX. The ports tree is aware of this from r384038 onwards. 20150416: Libraries specified by LIBADD in Makefiles must have a corresponding DPADD_ variable to ensure correct dependencies. This is now enforced in src.libnames.mk. 20150324: From legacy ata(4) driver was removed support for SATA controllers supported by more functional drivers ahci(4), siis(4) and mvs(4). Kernel modules ataahci and ataadaptec were removed completely, replaced by ahci and mvs modules respectively. 20150315: Clang, llvm and lldb have been upgraded to 3.6.0 release. Please see the 20141231 entry below for information about prerequisites and upgrading, if you are not already using 3.5.0 or higher. 20150307: The 32-bit PowerPC kernel has been changed to a position-independent executable. This can only be booted with a version of loader(8) newer than January 31, 2015, so make sure to update both world and kernel before rebooting. 20150217: If you are running a -CURRENT kernel since r273872 (Oct 30th, 2014), but before r278950, the RNG was not seeded properly. Immediately upgrade the kernel to r278950 or later and regenerate any keys (e.g. ssh keys or openssl keys) that were generated w/ a kernel from that range. This does not affect programs that directly used /dev/random or /dev/urandom. All userland uses of arc4random(3) are affected. 20150210: The autofs(4) ABI was changed in order to restore binary compatibility with 10.1-RELEASE. The automountd(8) daemon needs to be rebuilt to work with the new kernel. 20150131: The powerpc64 kernel has been changed to a position-independent executable. This can only be booted with a new version of loader(8), so make sure to update both world and kernel before rebooting. 20150118: Clang and llvm have been upgraded to 3.5.1 release. This is a bugfix only release, no new features have been added. Please see the 20141231 entry below for information about prerequisites and upgrading, if you are not already using 3.5.0. 20150107: ELF tools addr2line, elfcopy (strip), nm, size, and strings are now taken from the ELF Tool Chain project rather than GNU binutils. They should be drop-in replacements, with the addition of arm64 support. The WITHOUT_ELFTOOLCHAIN_TOOLS= knob may be used to obtain the binutils tools, if necessary. See 20150805 for updated information. 20150105: The default Unbound configuration now enables remote control using a local socket. Users who have already enabled the local_unbound service should regenerate their configuration by running "service local_unbound setup" as root. 20150102: The GNU texinfo and GNU info pages have been removed. To be able to view GNU info pages please install texinfo from ports. 20141231: Clang, llvm and lldb have been upgraded to 3.5.0 release. As of this release, a prerequisite for building clang, llvm and lldb is a C++11 capable compiler and C++11 standard library. This means that to be able to successfully build the cross-tools stage of buildworld, with clang as the bootstrap compiler, your system compiler or cross compiler should either be clang 3.3 or later, or gcc 4.8 or later, and your system C++ library should be libc++, or libdstdc++ from gcc 4.8 or later. On any standard FreeBSD 10.x or 11.x installation, where clang and libc++ are on by default (that is, on x86 or arm), this should work out of the box. On 9.x installations where clang is enabled by default, e.g. on x86 and powerpc, libc++ will not be enabled by default, so libc++ should be built (with clang) and installed first. If both clang and libc++ are missing, build clang first, then use it to build libc++. On 8.x and earlier installations, upgrade to 9.x first, and then follow the instructions for 9.x above. Sparc64 and mips users are unaffected, as they still use gcc 4.2.1 by default, and do not build clang. Many embedded systems are resource constrained, and will not be able to build clang in a reasonable time, or in some cases at all. In those cases, cross building bootable systems on amd64 is a workaround. This new version of clang introduces a number of new warnings, of which the following are most likely to appear: -Wabsolute-value This warns in two cases, for both C and C++: * When the code is trying to take the absolute value of an unsigned quantity, which is effectively a no-op, and almost never what was intended. The code should be fixed, if at all possible. If you are sure that the unsigned quantity can be safely cast to signed, without loss of information or undefined behavior, you can add an explicit cast, or disable the warning. * When the code is trying to take an absolute value, but the called abs() variant is for the wrong type, which can lead to truncation. If you want to disable the warning instead of fixing the code, please make sure that truncation will not occur, or it might lead to unwanted side-effects. -Wtautological-undefined-compare and -Wundefined-bool-conversion These warn when C++ code is trying to compare 'this' against NULL, while 'this' should never be NULL in well-defined C++ code. However, there is some legacy (pre C++11) code out there, which actively abuses this feature, which was less strictly defined in previous C++ versions. Squid and openjdk do this, for example. The warning can be turned off for C++98 and earlier, but compiling the code in C++11 mode might result in unexpected behavior; for example, the parts of the program that are unreachable could be optimized away. 20141222: The old NFS client and server (kernel options NFSCLIENT, NFSSERVER) kernel sources have been removed. The .h files remain, since some utilities include them. This will need to be fixed later. If "mount -t oldnfs ..." is attempted, it will fail. If the "-o" option on mountd(8), nfsd(8) or nfsstat(1) is used, the utilities will report errors. 20141121: The handling of LOCAL_LIB_DIRS has been altered to skip addition of directories to top level SUBDIR variable when their parent directory is included in LOCAL_DIRS. Users with build systems with such hierarchies and without SUBDIR entries in the parent directory Makefiles should add them or add the directories to LOCAL_DIRS. 20141109: faith(4) and faithd(8) have been removed from the base system. Faith has been obsolete for a very long time. 20141104: vt(4), the new console driver, is enabled by default. It brings support for Unicode and double-width characters, as well as support for UEFI and integration with the KMS kernel video drivers. You may need to update your console settings in /etc/rc.conf, most probably the keymap. During boot, /etc/rc.d/syscons will indicate what you need to do. vt(4) still has issues and lacks some features compared to syscons(4). See the wiki for up-to-date information: https://wiki.freebsd.org/Newcons If you want to keep using syscons(4), you can do so by adding the following line to /boot/loader.conf: kern.vty=sc 20141102: pjdfstest has been integrated into kyua as an opt-in test suite. Please see share/doc/pjdfstest/README for more details on how to execute it. 20141009: gperf has been removed from the base system for architectures that use clang. Ports that require gperf will obtain it from the devel/gperf port. 20140923: pjdfstest has been moved from tools/regression/pjdfstest to contrib/pjdfstest . 20140922: At svn r271982, The default linux compat kernel ABI has been adjusted to 2.6.18 in support of the linux-c6 compat ports infrastructure update. If you wish to continue using the linux-f10 compat ports, add compat.linux.osrelease=2.6.16 to your local sysctl.conf. Users are encouraged to update their linux-compat packages to linux-c6 during their next update cycle. 20140729: The ofwfb driver, used to provide a graphics console on PowerPC when using vt(4), no longer allows mmap() of all physical memory. This will prevent Xorg on PowerPC with some ATI graphics cards from initializing properly unless x11-servers/xorg-server is updated to 1.12.4_8 or newer. 20140723: The xdev targets have been converted to using TARGET and TARGET_ARCH instead of XDEV and XDEV_ARCH. 20140719: The default unbound configuration has been modified to address issues with reverse lookups on networks that use private address ranges. If you use the local_unbound service, run "service local_unbound setup" as root to regenerate your configuration, then "service local_unbound reload" to load the new configuration. 20140709: The GNU texinfo and GNU info pages are not built and installed anymore, WITH_INFO knob has been added to allow to built and install them again. UPDATE: see 20150102 entry on texinfo's removal 20140708: The GNU readline library is now an INTERNALLIB - that is, it is statically linked into consumers (GDB and variants) in the base system, and the shared library is no longer installed. The devel/readline port is available for third party software that requires readline. 20140702: The Itanium architecture (ia64) has been removed from the list of known architectures. This is the first step in the removal of the architecture. 20140701: Commit r268115 has added NFSv4.1 server support, merged from projects/nfsv4.1-server. Since this includes changes to the internal interfaces between the NFS related modules, a full build of the kernel and modules will be necessary. __FreeBSD_version has been bumped. 20140629: The WITHOUT_VT_SUPPORT kernel config knob has been renamed WITHOUT_VT. (The other _SUPPORT knobs have a consistent meaning which differs from the behaviour controlled by this knob.) 20140619: Maximal length of the serial number in CTL was increased from 16 to 64 chars, that breaks ABI. All CTL-related tools, such as ctladm and ctld, need to be rebuilt to work with a new kernel. 20140606: The libatf-c and libatf-c++ major versions were downgraded to 0 and 1 respectively to match the upstream numbers. They were out of sync because, when they were originally added to FreeBSD, the upstream versions were not respected. These libraries are private and not yet built by default, so renumbering them should be a non-issue. However, unclean source trees will yield broken test programs once the operator executes "make delete-old-libs" after a "make installworld". Additionally, the atf-sh binary was made private by moving it into /usr/libexec/. Already-built shell test programs will keep the path to the old binary so they will break after "make delete-old" is run. If you are using WITH_TESTS=yes (not the default), wipe the object tree and rebuild from scratch to prevent spurious test failures. This is only needed once: the misnumbered libraries and misplaced binaries have been added to OptionalObsoleteFiles.inc so they will be removed during a clean upgrade. 20140512: Clang and llvm have been upgraded to 3.4.1 release. 20140508: We bogusly installed src.opts.mk in /usr/share/mk. This file should be removed to avoid issues in the future (and has been added to ObsoleteFiles.inc). 20140505: /etc/src.conf now affects only builds of the FreeBSD src tree. In the past, it affected all builds that used the bsd.*.mk files. The old behavior was a bug, but people may have relied upon it. To get this behavior back, you can .include /etc/src.conf from /etc/make.conf (which is still global and isn't changed). This also changes the behavior of incremental builds inside the tree of individual directories. Set MAKESYSPATH to ".../share/mk" to do that. Although this has survived make universe and some upgrade scenarios, other upgrade scenarios may have broken. At least one form of temporary breakage was fixed with MAKESYSPATH settings for buildworld as well... In cases where MAKESYSPATH isn't working with this setting, you'll need to set it to the full path to your tree. One side effect of all this cleaning up is that bsd.compiler.mk is no longer implicitly included by bsd.own.mk. If you wish to use COMPILER_TYPE, you must now explicitly include bsd.compiler.mk as well. 20140430: The lindev device has been removed since /dev/full has been made a standard device. __FreeBSD_version has been bumped. 20140424: The knob WITHOUT_VI was added to the base system, which controls building ex(1), vi(1), etc. Older releases of FreeBSD required ex(1) in order to reorder files share/termcap and didn't build ex(1) as a build tool, so building/installing with WITH_VI is highly advised for build hosts for older releases. This issue has been fixed in stable/9 and stable/10 in r277022 and r276991, respectively. 20140418: The YES_HESIOD knob has been removed. It has been obsolete for a decade. Please move to using WITH_HESIOD instead or your builds will silently lack HESIOD. 20140405: The uart(4) driver has been changed with respect to its handling of the low-level console. Previously the uart(4) driver prevented any process from changing the baudrate or the CLOCAL and HUPCL control flags. By removing the restrictions, operators can make changes to the serial console port without having to reboot. However, when getty(8) is started on the serial device that is associated with the low-level console, a misconfigured terminal line in /etc/ttys will now have a real impact. Before upgrading the kernel, make sure that /etc/ttys has the serial console device configured as 3wire without baudrate to preserve the previous behaviour. E.g: ttyu0 "/usr/libexec/getty 3wire" vt100 on secure 20140306: Support for libwrap (TCP wrappers) in rpcbind was disabled by default to improve performance. To re-enable it, if needed, run rpcbind with command line option -W. 20140226: Switched back to the GPL dtc compiler due to updates in the upstream dts files not being supported by the BSDL dtc compiler. You will need to rebuild your kernel toolchain to pick up the new compiler. Core dumps may result while building dtb files during a kernel build if you fail to do so. Set WITHOUT_GPL_DTC if you require the BSDL compiler. 20140216: Clang and llvm have been upgraded to 3.4 release. 20140216: The nve(4) driver has been removed. Please use the nfe(4) driver for NVIDIA nForce MCP Ethernet adapters instead. 20140212: An ABI incompatibility crept into the libc++ 3.4 import in r261283. This could cause certain C++ applications using shared libraries built against the previous version of libc++ to crash. The incompatibility has now been fixed, but any C++ applications or shared libraries built between r261283 and r261801 should be recompiled. 20140204: OpenSSH will now ignore errors caused by kernel lacking of Capsicum capability mode support. Please note that enabling the feature in kernel is still highly recommended. 20140131: OpenSSH is now built with sandbox support, and will use sandbox as the default privilege separation method. This requires Capsicum capability mode support in kernel. 20140128: The libelf and libdwarf libraries have been updated to newer versions from upstream. Shared library version numbers for these two libraries were bumped. Any ports or binaries requiring these two libraries should be recompiled. __FreeBSD_version is bumped to 1100006. 20140110: If a Makefile in a tests/ directory was auto-generating a Kyuafile instead of providing an explicit one, this would prevent such Makefile from providing its own Kyuafile in the future during NO_CLEAN builds. This has been fixed in the Makefiles but manual intervention is needed to clean an objdir if you use NO_CLEAN: # find /usr/obj -name Kyuafile | xargs rm -f 20131213: The behavior of gss_pseudo_random() for the krb5 mechanism has changed, for applications requesting a longer random string than produced by the underlying enctype's pseudo-random() function. In particular, the random string produced from a session key of enctype aes256-cts-hmac-sha1-96 or aes256-cts-hmac-sha1-96 will be different at the 17th octet and later, after this change. The counter used in the PRF+ construction is now encoded as a big-endian integer in accordance with RFC 4402. __FreeBSD_version is bumped to 1100004. 20131108: The WITHOUT_ATF build knob has been removed and its functionality has been subsumed into the more generic WITHOUT_TESTS. If you were using the former to disable the build of the ATF libraries, you should change your settings to use the latter. 20131025: The default version of mtree is nmtree which is obtained from NetBSD. The output is generally the same, but may vary slightly. If you found you need identical output adding "-F freebsd9" to the command line should do the trick. For the time being, the old mtree is available as fmtree. 20131014: libbsdyml has been renamed to libyaml and moved to /usr/lib/private. This will break ports-mgmt/pkg. Rebuild the port, or upgrade to pkg 1.1.4_8 and verify bsdyml not linked in, before running "make delete-old-libs": # make -C /usr/ports/ports-mgmt/pkg build deinstall install clean or # pkg install pkg; ldd /usr/local/sbin/pkg | grep bsdyml 20131010: The stable/10 branch has been created in subversion from head revision r256279. 20131010: The rc.d/jail script has been updated to support jail(8) configuration file. The "jail__*" rc.conf(5) variables for per-jail configuration are automatically converted to /var/run/jail..conf before the jail(8) utility is invoked. This is transparently backward compatible. See below about some incompatibilities and rc.conf(5) manual page for more details. These variables are now deprecated in favor of jail(8) configuration file. One can use "rc.d/jail config " command to generate a jail(8) configuration file in /var/run/jail..conf without running the jail(8) utility. The default pathname of the configuration file is /etc/jail.conf and can be specified by using $jail_conf or $jail__conf variables. Please note that jail_devfs_ruleset accepts an integer at this moment. Please consider to rewrite the ruleset name with an integer. 20130930: BIND has been removed from the base system. If all you need is a local resolver, simply enable and start the local_unbound service instead. Otherwise, several versions of BIND are available in the ports tree. The dns/bind99 port is one example. With this change, nslookup(1) and dig(1) are no longer in the base system. Users should instead use host(1) and drill(1) which are in the base system. Alternatively, nslookup and dig can be obtained by installing the dns/bind-tools port. 20130916: With the addition of unbound(8), a new unbound user is now required during installworld. "mergemaster -p" can be used to add the user prior to installworld, as documented in the handbook. 20130911: OpenSSH is now built with DNSSEC support, and will by default silently trust signed SSHFP records. This can be controlled with the VerifyHostKeyDNS client configuration setting. DNSSEC support can be disabled entirely with the WITHOUT_LDNS option in src.conf. 20130906: The GNU Compiler Collection and C++ standard library (libstdc++) are no longer built by default on platforms where clang is the system compiler. You can enable them with the WITH_GCC and WITH_GNUCXX options in src.conf. 20130905: The PROCDESC kernel option is now part of the GENERIC kernel configuration and is required for the rwhod(8) to work. If you are using custom kernel configuration, you should include 'options PROCDESC'. 20130905: The API and ABI related to the Capsicum framework was modified in backward incompatible way. The userland libraries and programs have to be recompiled to work with the new kernel. This includes the following libraries and programs, but the whole buildworld is advised: libc, libprocstat, dhclient, tcpdump, hastd, hastctl, kdump, procstat, rwho, rwhod, uniq. 20130903: AES-NI intrinsic support has been added to gcc. The AES-NI module has been updated to use this support. A new gcc is required to build the aesni module on both i386 and amd64. 20130821: The PADLOCK_RNG and RDRAND_RNG kernel options are now devices. Thus "device padlock_rng" and "device rdrand_rng" should be used instead of "options PADLOCK_RNG" & "options RDRAND_RNG". 20130813: WITH_ICONV has been split into two feature sets. WITH_ICONV now enables just the iconv* functionality and is now on by default. WITH_LIBICONV_COMPAT enables the libiconv api and link time compatibility. Set WITHOUT_ICONV to build the old way. If you have been using WITH_ICONV before, you will very likely need to turn on WITH_LIBICONV_COMPAT. 20130806: INVARIANTS option now enables DEBUG for code with OpenSolaris and Illumos origin, including ZFS. If you have INVARIANTS in your kernel configuration, then there is no need to set DEBUG or ZFS_DEBUG explicitly. DEBUG used to enable witness(9) tracking of OpenSolaris (mostly ZFS) locks if WITNESS option was set. Because that generated a lot of witness(9) reports and all of them were believed to be false positives, this is no longer done. New option OPENSOLARIS_WITNESS can be used to achieve the previous behavior. 20130806: Timer values in IPv6 data structures now use time_uptime instead of time_second. Although this is not a user-visible functional change, userland utilities which directly use them---ndp(8), rtadvd(8), and rtsold(8) in the base system---need to be updated to r253970 or later. 20130802: find -delete can now delete the pathnames given as arguments, instead of only files found below them or if the pathname did not contain any slashes. Formerly, the following error message would result: find: -delete: : relative path potentially not safe Deleting the pathnames given as arguments can be prevented without error messages using -mindepth 1 or by changing directory and passing "." as argument to find. This works in the old as well as the new version of find. 20130726: Behavior of devfs rules path matching has been changed. Pattern is now always matched against fully qualified devfs path and slash characters must be explicitly matched by slashes in pattern (FNM_PATHNAME). Rulesets involving devfs subdirectories must be reviewed. 20130716: The default ARM ABI has changed to the ARM EABI. The old ABI is incompatible with the ARM EABI and all programs and modules will need to be rebuilt to work with a new kernel. To keep using the old ABI ensure the WITHOUT_ARM_EABI knob is set. NOTE: Support for the old ABI will be removed in the future and users are advised to upgrade. 20130709: pkg_install has been disconnected from the build if you really need it you should add WITH_PKGTOOLS in your src.conf(5). 20130709: Most of network statistics structures were changed to be able keep 64-bits counters. Thus all tools, that work with networking statistics, must be rebuilt (netstat(1), bsnmpd(1), etc.) 20130618: Fix a bug that allowed a tracing process (e.g. gdb) to write to a memory-mapped file in the traced process's address space even if neither the traced process nor the tracing process had write access to that file. 20130615: CVS has been removed from the base system. An exact copy of the code is available from the devel/cvs port. 20130613: Some people report the following error after the switch to bmake: make: illegal option -- J usage: make [-BPSXeiknpqrstv] [-C directory] [-D variable] ... *** [buildworld] Error code 2 this likely due to an old instance of make in ${MAKEPATH} (${MAKEOBJDIRPREFIX}${.CURDIR}/make.${MACHINE}) which src/Makefile will use that blindly, if it exists, so if you see the above error: rm -rf `make -V MAKEPATH` should resolve it. 20130516: Use bmake by default. Whereas before one could choose to build with bmake via -DWITH_BMAKE one must now use -DWITHOUT_BMAKE to use the old make. The goal is to remove these knobs for 10-RELEASE. It is worth noting that bmake (like gmake) treats the command line as the unit of failure, rather than statements within the command line. Thus '(cd some/where && dosomething)' is safer than 'cd some/where; dosomething'. The '()' allows consistent behavior in parallel build. 20130429: Fix a bug that allows NFS clients to issue READDIR on files. 20130426: The WITHOUT_IDEA option has been removed because the IDEA patent expired. 20130426: The sysctl which controls TRIM support under ZFS has been renamed from vfs.zfs.trim_disable -> vfs.zfs.trim.enabled and has been enabled by default. 20130425: The mergemaster command now uses the default MAKEOBJDIRPREFIX rather than creating it's own in the temporary directory in order allow access to bootstrapped versions of tools such as install and mtree. When upgrading from version of FreeBSD where the install command does not support -l, you will need to install a new mergemaster command if mergemaster -p is required. This can be accomplished with the command (cd src/usr.sbin/mergemaster && make install). 20130404: Legacy ATA stack, disabled and replaced by new CAM-based one since FreeBSD 9.0, completely removed from the sources. Kernel modules atadisk and atapi*, user-level tools atacontrol and burncd are removed. Kernel option `options ATA_CAM` is now permanently enabled and removed. 20130319: SOCK_CLOEXEC and SOCK_NONBLOCK flags have been added to socket(2) and socketpair(2). Software, in particular Kerberos, may automatically detect and use these during building. The resulting binaries will not work on older kernels. 20130308: CTL_DISABLE has also been added to the sparc64 GENERIC (for further information, see the respective 20130304 entry). 20130304: Recent commits to callout(9) changed the size of struct callout, so the KBI is probably heavily disturbed. Also, some functions in callout(9)/sleep(9)/sleepqueue(9)/condvar(9) KPIs were replaced by macros. Every kernel module using it won't load, so rebuild is requested. The ctl device has been re-enabled in GENERIC for i386 and amd64, but does not initialize by default (because of the new CTL_DISABLE option) to save memory. To re-enable it, remove the CTL_DISABLE option from the kernel config file or set kern.cam.ctl.disable=0 in /boot/loader.conf. 20130301: The ctl device has been disabled in GENERIC for i386 and amd64. This was done due to the extra memory being allocated at system initialisation time by the ctl driver which was only used if a CAM target device was created. This makes a FreeBSD system unusable on 128MB or less of RAM. 20130208: A new compression method (lz4) has been merged to -HEAD. Please refer to zpool-features(7) for more information. Please refer to the "ZFS notes" section of this file for information on upgrading boot ZFS pools. 20130129: A BSD-licensed patch(1) variant has been added and is installed as bsdpatch, being the GNU version the default patch. To inverse the logic and use the BSD-licensed one as default, while having the GNU version installed as gnupatch, rebuild and install world with the WITH_BSD_PATCH knob set. 20130121: Due to the use of the new -l option to install(1) during build and install, you must take care not to directly set the INSTALL make variable in your /etc/make.conf, /etc/src.conf, or on the command line. If you wish to use the -C flag for all installs you may be able to add INSTALL+=-C to /etc/make.conf or /etc/src.conf. 20130118: The install(1) option -M has changed meaning and now takes an argument that is a file or path to append logs to. In the unlikely event that -M was the last option on the command line and the command line contained at least two files and a target directory the first file will have logs appended to it. The -M option served little practical purpose in the last decade so its use is expected to be extremely rare. 20121223: After switching to Clang as the default compiler some users of ZFS on i386 systems started to experience stack overflow kernel panics. Please consider using 'options KSTACK_PAGES=4' in such configurations. 20121222: GEOM_LABEL now mangles label names read from file system metadata. Mangling affect labels containing spaces, non-printable characters, '%' or '"'. Device names in /etc/fstab and other places may need to be updated. 20121217: By default, only the 10 most recent kernel dumps will be saved. To restore the previous behaviour (no limit on the number of kernel dumps stored in the dump directory) add the following line to /etc/rc.conf: savecore_flags="" 20121201: With the addition of auditdistd(8), a new auditdistd user is now required during installworld. "mergemaster -p" can be used to add the user prior to installworld, as documented in the handbook. 20121117: The sin6_scope_id member variable in struct sockaddr_in6 is now filled by the kernel before passing the structure to the userland via sysctl or routing socket. This means the KAME-specific embedded scope id in sin6_addr.s6_addr[2] is always cleared in userland application. This behavior can be controlled by net.inet6.ip6.deembed_scopeid. __FreeBSD_version is bumped to 1000025. 20121105: On i386 and amd64 systems WITH_CLANG_IS_CC is now the default. This means that the world and kernel will be compiled with clang and that clang will be installed as /usr/bin/cc, /usr/bin/c++, and /usr/bin/cpp. To disable this behavior and revert to building with gcc, compile with WITHOUT_CLANG_IS_CC. Really old versions of current may need to bootstrap WITHOUT_CLANG first if the clang build fails (its compatibility window doesn't extend to the 9 stable branch point). 20121102: The IPFIREWALL_FORWARD kernel option has been removed. Its functionality now turned on by default. 20121023: The ZERO_COPY_SOCKET kernel option has been removed and split into SOCKET_SEND_COW and SOCKET_RECV_PFLIP. NB: SOCKET_SEND_COW uses the VM page based copy-on-write mechanism which is not safe and may result in kernel crashes. NB: The SOCKET_RECV_PFLIP mechanism is useless as no current driver supports disposeable external page sized mbuf storage. Proper replacements for both zero-copy mechanisms are under consideration and will eventually lead to complete removal of the two kernel options. 20121023: The IPv4 network stack has been converted to network byte order. The following modules need to be recompiled together with kernel: carp(4), divert(4), gif(4), siftr(4), gre(4), pf(4), ipfw(4), ng_ipfw(4), stf(4). 20121022: Support for non-MPSAFE filesystems was removed from VFS. The VFS_VERSION was bumped, all filesystem modules shall be recompiled. 20121018: All the non-MPSAFE filesystems have been disconnected from the build. The full list includes: codafs, hpfs, ntfs, nwfs, portalfs, smbfs, xfs. 20121016: The interface cloning API and ABI has changed. The following modules need to be recompiled together with kernel: ipfw(4), pfsync(4), pflog(4), usb(4), wlan(4), stf(4), vlan(4), disc(4), edsc(4), if_bridge(4), gif(4), tap(4), faith(4), epair(4), enc(4), tun(4), if_lagg(4), gre(4). 20121015: The sdhci driver was split in two parts: sdhci (generic SD Host Controller logic) and sdhci_pci (actual hardware driver). No kernel config modifications are required, but if you load sdhc as a module you must switch to sdhci_pci instead. 20121014: Import the FUSE kernel and userland support into base system. 20121013: The GNU sort(1) program has been removed since the BSD-licensed sort(1) has been the default for quite some time and no serious problems have been reported. The corresponding WITH_GNU_SORT knob has also gone. 20121006: The pfil(9) API/ABI for AF_INET family has been changed. Packet filtering modules: pf(4), ipfw(4), ipfilter(4) need to be recompiled with new kernel. 20121001: The net80211(4) ABI has been changed to allow for improved driver PS-POLL and power-save support. All wireless drivers need to be recompiled to work with the new kernel. 20120913: The random(4) support for the VIA hardware random number generator (`PADLOCK') is no longer enabled unconditionally. Add the padlock_rng device in the custom kernel config if needed. The GENERIC kernels on i386 and amd64 do include the device, so the change only affects the custom kernel configurations. 20120908: The pf(4) packet filter ABI has been changed. pfctl(8) and snmp_pf module need to be recompiled to work with new kernel. 20120828: A new ZFS feature flag "com.delphix:empty_bpobj" has been merged to -HEAD. Pools that have empty_bpobj in active state can not be imported read-write with ZFS implementations that do not support this feature. For more information read the zpool-features(5) manual page. 20120727: The sparc64 ZFS loader has been changed to no longer try to auto- detect ZFS providers based on diskN aliases but now requires these to be explicitly listed in the OFW boot-device environment variable. 20120712: The OpenSSL has been upgraded to 1.0.1c. Any binaries requiring libcrypto.so.6 or libssl.so.6 must be recompiled. Also, there are configuration changes. Make sure to merge /etc/ssl/openssl.cnf. 20120712: The following sysctls and tunables have been renamed for consistency with other variables: kern.cam.da.da_send_ordered -> kern.cam.da.send_ordered kern.cam.ada.ada_send_ordered -> kern.cam.ada.send_ordered 20120628: The sort utility has been replaced with BSD sort. For now, GNU sort is also available as "gnusort" or the default can be set back to GNU sort by setting WITH_GNU_SORT. In this case, BSD sort will be installed as "bsdsort". 20120611: A new version of ZFS (pool version 5000) has been merged to -HEAD. Starting with this version the old system of ZFS pool versioning is superseded by "feature flags". This concept enables forward compatibility against certain future changes in functionality of ZFS pools. The first read-only compatible "feature flag" for ZFS pools is named "com.delphix:async_destroy". For more information read the new zpool-features(5) manual page. Please refer to the "ZFS notes" section of this file for information on upgrading boot ZFS pools. 20120417: The malloc(3) implementation embedded in libc now uses sources imported as contrib/jemalloc. The most disruptive API change is to /etc/malloc.conf. If your system has an old-style /etc/malloc.conf, delete it prior to installworld, and optionally re-create it using the new format after rebooting. See malloc.conf(5) for details (specifically the TUNING section and the "opt.*" entries in the MALLCTL NAMESPACE section). 20120328: Big-endian MIPS TARGET_ARCH values no longer end in "eb". mips64eb is now spelled mips64. mipsn32eb is now spelled mipsn32. mipseb is now spelled mips. This is to aid compatibility with third-party software that expects this naming scheme in uname(3). Little-endian settings are unchanged. If you are updating a big-endian mips64 machine from before this change, you may need to set MACHINE_ARCH=mips64 in your environment before the new build system will recognize your machine. 20120306: Disable by default the option VFS_ALLOW_NONMPSAFE for all supported platforms. 20120229: Now unix domain sockets behave "as expected" on nullfs(5). Previously nullfs(5) did not pass through all behaviours to the underlying layer, as a result if we bound to a socket on the lower layer we could connect only to the lower path; if we bound to the upper layer we could connect only to the upper path. The new behavior is one can connect to both the lower and the upper paths regardless what layer path one binds to. 20120211: The getifaddrs upgrade path broken with 20111215 has been restored. If you have upgraded in between 20111215 and 20120209 you need to recompile libc again with your kernel. You still need to recompile world to be able to configure CARP but this restriction already comes from 20111215. 20120114: The set_rcvar() function has been removed from /etc/rc.subr. All base and ports rc.d scripts have been updated, so if you have a port installed with a script in /usr/local/etc/rc.d you can either hand-edit the rcvar= line, or reinstall the port. An easy way to handle the mass-update of /etc/rc.d: rm /etc/rc.d/* && mergemaster -i 20120109: panic(9) now stops other CPUs in the SMP systems, disables interrupts on the current CPU and prevents other threads from running. This behavior can be reverted using the kern.stop_scheduler_on_panic tunable/sysctl. The new behavior can be incompatible with kern.sync_on_panic. 20111215: The carp(4) facility has been changed significantly. Configuration of the CARP protocol via ifconfig(8) has changed, as well as format of CARP events submitted to devd(8) has changed. See manual pages for more information. The arpbalance feature of carp(4) is currently not supported anymore. Size of struct in_aliasreq, struct in6_aliasreq has changed. User utilities using SIOCAIFADDR, SIOCAIFADDR_IN6, e.g. ifconfig(8), need to be recompiled. 20111122: The acpi_wmi(4) status device /dev/wmistat has been renamed to /dev/wmistat0. 20111108: The option VFS_ALLOW_NONMPSAFE option has been added in order to explicitely support non-MPSAFE filesystems. It is on by default for all supported platform at this present time. 20111101: The broken amd(4) driver has been replaced with esp(4) in the amd64, i386 and pc98 GENERIC kernel configuration files. 20110930: sysinstall has been removed 20110923: The stable/9 branch created in subversion. This corresponds to the RELENG_9 branch in CVS. COMMON ITEMS: General Notes ------------- Avoid using make -j when upgrading. While generally safe, there are sometimes problems using -j to upgrade. If your upgrade fails with -j, please try again without -j. From time to time in the past there have been problems using -j with buildworld and/or installworld. This is especially true when upgrading between "distant" versions (eg one that cross a major release boundary or several minor releases, or when several months have passed on the -current branch). Sometimes, obscure build problems are the result of environment poisoning. This can happen because the make utility reads its environment when searching for values for global variables. To run your build attempts in an "environmental clean room", prefix all make commands with 'env -i '. See the env(1) manual page for more details. When upgrading from one major version to another it is generally best to upgrade to the latest code in the currently installed branch first, then do an upgrade to the new branch. This is the best-tested upgrade path, and has the highest probability of being successful. Please try this approach before reporting problems with a major version upgrade. When upgrading a live system, having a root shell around before installing anything can help undo problems. Not having a root shell around can lead to problems if pam has changed too much from your starting point to allow continued authentication after the upgrade. This file should be read as a log of events. When a later event changes information of a prior event, the prior event should not be deleted. Instead, a pointer to the entry with the new information should be placed in the old entry. Readers of this file should also sanity check older entries before relying on them blindly. Authors of new entries should write them with this in mind. ZFS notes --------- When upgrading the boot ZFS pool to a new version, always follow these two steps: 1.) recompile and reinstall the ZFS boot loader and boot block (this is part of "make buildworld" and "make installworld") 2.) update the ZFS boot block on your boot drive The following example updates the ZFS boot block on the first partition (freebsd-boot) of a GPT partitioned drive ada0: "gpart bootcode -p /boot/gptzfsboot -i 1 ada0" Non-boot pools do not need these updates. To build a kernel ----------------- If you are updating from a prior version of FreeBSD (even one just a few days old), you should follow this procedure. It is the most failsafe as it uses a /usr/obj tree with a fresh mini-buildworld, make kernel-toolchain make -DALWAYS_CHECK_MAKE buildkernel KERNCONF=YOUR_KERNEL_HERE make -DALWAYS_CHECK_MAKE installkernel KERNCONF=YOUR_KERNEL_HERE To test a kernel once --------------------- If you just want to boot a kernel once (because you are not sure if it works, or if you want to boot a known bad kernel to provide debugging information) run make installkernel KERNCONF=YOUR_KERNEL_HERE KODIR=/boot/testkernel nextboot -k testkernel To just build a kernel when you know that it won't mess you up -------------------------------------------------------------- This assumes you are already running a CURRENT system. Replace ${arch} with the architecture of your machine (e.g. "i386", "arm", "amd64", "ia64", "pc98", "sparc64", "powerpc", "mips", etc). cd src/sys/${arch}/conf config KERNEL_NAME_HERE cd ../compile/KERNEL_NAME_HERE make depend make make install If this fails, go to the "To build a kernel" section. To rebuild everything and install it on the current system. ----------------------------------------------------------- # Note: sometimes if you are running current you gotta do more than # is listed here if you are upgrading from a really old current. make buildworld make kernel KERNCONF=YOUR_KERNEL_HERE [1] [3] mergemaster -Fp [5] make installworld mergemaster -Fi [4] make delete-old [6] To cross-install current onto a separate partition -------------------------------------------------- # In this approach we use a separate partition to hold # current's root, 'usr', and 'var' directories. A partition # holding "/", "/usr" and "/var" should be about 2GB in # size. make buildworld make buildkernel KERNCONF=YOUR_KERNEL_HERE make installworld DESTDIR=${CURRENT_ROOT} -DDB_FROM_SRC make distribution DESTDIR=${CURRENT_ROOT} # if newfs'd make installkernel KERNCONF=YOUR_KERNEL_HERE DESTDIR=${CURRENT_ROOT} cp /etc/fstab ${CURRENT_ROOT}/etc/fstab # if newfs'd To upgrade in-place from stable to current ---------------------------------------------- make buildworld [9] make kernel KERNCONF=YOUR_KERNEL_HERE [8] [1] [3] mergemaster -Fp [5] make installworld mergemaster -Fi [4] make delete-old [6] Make sure that you've read the UPDATING file to understand the tweaks to various things you need. At this point in the life cycle of current, things change often and you are on your own to cope. The defaults can also change, so please read ALL of the UPDATING entries. Also, if you are tracking -current, you must be subscribed to freebsd-current@freebsd.org. Make sure that before you update your sources that you have read and understood all the recent messages there. If in doubt, please track -stable which has much fewer pitfalls. [1] If you have third party modules, such as vmware, you should disable them at this point so they don't crash your system on reboot. [3] From the bootblocks, boot -s, and then do fsck -p mount -u / mount -a cd src adjkerntz -i # if CMOS is wall time Also, when doing a major release upgrade, it is required that you boot into single user mode to do the installworld. [4] Note: This step is non-optional. Failure to do this step can result in a significant reduction in the functionality of the system. Attempting to do it by hand is not recommended and those that pursue this avenue should read this file carefully, as well as the archives of freebsd-current and freebsd-hackers mailing lists for potential gotchas. The -U option is also useful to consider. See mergemaster(8) for more information. [5] Usually this step is a noop. However, from time to time you may need to do this if you get unknown user in the following step. It never hurts to do it all the time. You may need to install a new mergemaster (cd src/usr.sbin/mergemaster && make install) after the buildworld before this step if you last updated from current before 20130425 or from -stable before 20130430. [6] This only deletes old files and directories. Old libraries can be deleted by "make delete-old-libs", but you have to make sure that no program is using those libraries anymore. [8] In order to have a kernel that can run the 4.x binaries needed to do an installworld, you must include the COMPAT_FREEBSD4 option in your kernel. Failure to do so may leave you with a system that is hard to boot to recover. A similar kernel option COMPAT_FREEBSD5 is required to run the 5.x binaries on more recent kernels. And so on for COMPAT_FREEBSD6 and COMPAT_FREEBSD7. Make sure that you merge any new devices from GENERIC since the last time you updated your kernel config file. [9] When checking out sources, you must include the -P flag to have cvs prune empty directories. If CPUTYPE is defined in your /etc/make.conf, make sure to use the "?=" instead of the "=" assignment operator, so that buildworld can override the CPUTYPE if it needs to. MAKEOBJDIRPREFIX must be defined in an environment variable, and not on the command line, or in /etc/make.conf. buildworld will warn if it is improperly defined. FORMAT: This file contains a list, in reverse chronological order, of major breakages in tracking -current. It is not guaranteed to be a complete list of such breakages, and only contains entries since September 23, 2011. If you need to see UPDATING entries from before that date, you will need to fetch an UPDATING file from an older FreeBSD release. Copyright information: Copyright 1998-2009 M. Warner Losh. All Rights Reserved. Redistribution, publication, translation and use, with or without modification, in full or in part, in any form or format of this document are permitted without further permission from the author. THIS DOCUMENT IS PROVIDED BY WARNER LOSH ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WARNER LOSH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Contact Warner Losh if you have any questions about your use of this document. $FreeBSD$ Index: stable/11/share/man/man5/src.conf.5 =================================================================== --- stable/11/share/man/man5/src.conf.5 (revision 327836) +++ stable/11/share/man/man5/src.conf.5 (revision 327837) @@ -1,1592 +1,1594 @@ .\" DO NOT EDIT-- this file is generated by tools/build/options/makeman. .\" $FreeBSD$ -.Dd September 7, 2017 +.Dd January 8, 2018 .Dt SRC.CONF 5 .Os .Sh NAME .Nm src.conf .Nd "source build options" .Sh DESCRIPTION The .Nm file contains settings that will apply to every build involving the .Fx source tree; see .Xr build 7 . .Pp The .Nm file uses the standard makefile syntax. However, .Nm should not specify any dependencies to .Xr make 1 . Instead, .Nm is to set .Xr make 1 variables that control the aspects of how the system builds. .Pp The default location of .Nm is .Pa /etc/src.conf , though an alternative location can be specified in the .Xr make 1 variable .Va SRCCONF . Overriding the location of .Nm may be necessary if the system-wide settings are not suitable for a particular build. For instance, setting .Va SRCCONF to .Pa /dev/null effectively resets all build controls to their defaults. .Pp The only purpose of .Nm is to control the compilation of the .Fx source code, which is usually located in .Pa /usr/src . As a rule, the system administrator creates .Nm when the values of certain control variables need to be changed from their defaults. .Pp In addition, control variables can be specified for a particular build via the .Fl D option of .Xr make 1 or in its environment; see .Xr environ 7 . .Pp The environment of .Xr make 1 for the build can be controlled via the .Va SRC_ENV_CONF variable, which defaults to .Pa /etc/src-env.conf . Some examples that may only be set in this file are .Va WITH_DIRDEPS_BUILD , and .Va WITH_META_MODE as they are environment-only variables. Note that .Va MAKEOBJDIRPREFIX may be set here only when using .Va WITH_DIRDEPS_BUILD . .Pp The values of variables are ignored regardless of their setting; even if they would be set to .Dq Li FALSE or .Dq Li NO . The presence of an option causes it to be honored by .Xr make 1 . .Pp This list provides a name and short description for variables that can be used for source builds. .Bl -tag -width indent .It Va WITHOUT_ACCT Set to not build process accounting tools such as .Xr accton 8 and .Xr sa 8 . .It Va WITHOUT_ACPI Set to not build .Xr acpiconf 8 , .Xr acpidump 8 and related programs. .It Va WITHOUT_AMD Set to not build .Xr amd 8 , and related programs. .It Va WITHOUT_APM Set to not build .Xr apm 8 , .Xr apmd 8 and related programs. .It Va WITHOUT_ASSERT_DEBUG Set to compile programs and libraries without the .Xr assert 3 checks. .It Va WITHOUT_AT Set to not build .Xr at 1 and related utilities. .It Va WITHOUT_ATM Set to not build programs and libraries related to ATM networking. .It Va WITHOUT_AUDIT Set to not build audit support into system programs. .It Va WITHOUT_AUTHPF Set to not build .Xr authpf 8 . .It Va WITHOUT_AUTOFS Set to not build .Xr autofs 5 related programs, libraries, and kernel modules. .It Va WITH_AUTO_OBJ Enable automatic creation of objdirs. .Pp This must be set in the environment, make command line, or .Pa /etc/src-env.conf , not .Pa /etc/src.conf . .It Va WITHOUT_BHYVE Set to not build or install .Xr bhyve 8 , associated utilities, and examples. .Pp This option only affects amd64/amd64. .It Va WITHOUT_BINUTILS Set to not build or install binutils (as, ld, objcopy, and objdump ) as part of the normal system build. The resulting system cannot build programs from source. .Pp This is a default setting on arm64/aarch64. .It Va WITH_BINUTILS Set to build and install binutils (as, ld, objcopy, and objdump) as part of the normal system build. .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, pc98/i386, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITHOUT_BINUTILS_BOOTSTRAP Set to not build binutils (as, ld, objcopy and objdump) as part of the bootstrap process. .Bf -symbolic The option does not work for build targets unless some alternative toolchain is provided. .Ef .Pp This is a default setting on arm64/aarch64. .It Va WITH_BINUTILS_BOOTSTRAP Set build binutils (as, ld, objcopy and objdump) as part of the bootstrap process. .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, pc98/i386, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITHOUT_BLACKLIST Set this if you do not want to build .Xr blacklistd 8 and .Xr blacklistctl 8 . When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_BLACKLIST_SUPPORT .El .It Va WITHOUT_BLACKLIST_SUPPORT Set to build some programs without .Xr libblacklist 3 support, like .Xr fingerd 8 , .Xr ftpd 8 , .Xr rlogind 8 , .Xr rshd 8 , and .Xr sshd 8 . .It Va WITHOUT_BLUETOOTH Set to not build Bluetooth related kernel modules, programs and libraries. .It Va WITHOUT_BOOT Set to not build the boot blocks and loader. .It Va WITHOUT_BOOTPARAMD Set to not build or install .Xr bootparamd 8 . .It Va WITHOUT_BOOTPD Set to not build or install .Xr bootpd 8 . .It Va WITHOUT_BSDINSTALL Set to not build .Xr bsdinstall 8 , .Xr sade 8 , and related programs. .It Va WITHOUT_BSD_CPIO Set to not build the BSD licensed version of cpio based on .Xr libarchive 3 . .It Va WITH_BSD_GREP Install BSD-licensed grep as '[ef]grep' instead of GNU grep. .It Va WITHOUT_BSD_GREP_FASTMATCH Set this option to exclude the fastmatch implementation from .Xr bsdgrep 1 , instead using only .Xr regex 3 . .It Va WITHOUT_BSNMP Set to not build or install .Xr bsnmpd 1 and related libraries and data files. .It Va WITHOUT_BZIP2 Set to not build contributed bzip2 software as a part of the base system. .Bf -symbolic The option has no effect yet. .Ef When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_BZIP2_SUPPORT .El .It Va WITHOUT_BZIP2_SUPPORT Set to build some programs without optional bzip2 support. .It Va WITHOUT_CALENDAR Set to not build .Xr calendar 1 . .It Va WITHOUT_CAPSICUM Set to not build Capsicum support into system programs. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_CASPER .El .It Va WITHOUT_CASPER Set to not build Casper program and related libraries. .It Va WITH_CCACHE_BUILD Set to use .Xr ccache 1 for the build. No configuration is required except to install the .Sy devel/ccache package. When using with .Xr distcc 1 , set .Sy CCACHE_PREFIX=/usr/local/bin/distcc . The default cache directory of .Pa $HOME/.ccache will be used, which can be overridden by setting .Sy CCACHE_DIR . The .Sy CCACHE_COMPILERCHECK option defaults to .Sy content when using the in-tree bootstrap compiler, and .Sy mtime when using an external compiler. The .Sy CCACHE_CPP2 option is used for Clang but not GCC. .Pp Sharing a cache between multiple work directories requires using a layout similar to .Pa /some/prefix/src .Pa /some/prefix/obj and an environment such as: .Bd -literal -offset indent CCACHE_BASEDIR='${SRCTOP:H}' MAKEOBJDIRPREFIX='${SRCTOP:H}/obj' .Ed .Pp See .Xr ccache 1 for more configuration options. .It Va WITHOUT_CCD Set to not build .Xr geom_ccd 4 and related utilities. .It Va WITHOUT_CDDL Set to not build code licensed under Sun's CDDL. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_CTF .It .Va WITHOUT_ZFS .El .It Va WITHOUT_CLANG Set to not build the Clang C/C++ compiler during the regular phase of the build. .Pp This is a default setting on sparc64/sparc64. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_CLANG_EXTRAS .It .Va WITHOUT_CLANG_FULL .El .It Va WITH_CLANG Set to build the Clang C/C++ compiler during the normal phase of the build. .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, pc98/i386, powerpc/powerpc and powerpc/powerpc64. .It Va WITHOUT_CLANG_BOOTSTRAP Set to not build the Clang C/C++ compiler during the bootstrap phase of the build. To be able to build the system, either gcc or clang bootstrap must be enabled unless an alternate compiler is provided via XCC. .Pp This is a default setting on mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITH_CLANG_BOOTSTRAP Set to build the Clang C/C++ compiler during the bootstrap phase of the build. .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386 and pc98/i386. .It Va WITH_CLANG_EXTRAS Set to build additional clang and llvm tools, such as bugpoint. .It Va WITHOUT_CLANG_FULL Set to avoid building the ARCMigrate, Rewriter and StaticAnalyzer components of the Clang C/C++ compiler. .Pp This is a default setting on sparc64/sparc64. .It Va WITH_CLANG_FULL Set to build the ARCMigrate, Rewriter and StaticAnalyzer components of the Clang C/C++ compiler. .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, pc98/i386, powerpc/powerpc and powerpc/powerpc64. .It Va WITHOUT_CLANG_IS_CC Set to install the GCC compiler as .Pa /usr/bin/cc , .Pa /usr/bin/c++ and .Pa /usr/bin/cpp . .Pp This is a default setting on mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITH_CLANG_IS_CC Set to install the Clang C/C++ compiler as .Pa /usr/bin/cc , .Pa /usr/bin/c++ and .Pa /usr/bin/cpp . .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386 and pc98/i386. .It Va WITHOUT_CPP Set to not build .Xr cpp 1 . .It Va WITHOUT_CROSS_COMPILER Set to not build any cross compiler in the cross-tools stage of buildworld. When compiling a different version of .Fx than what is installed on the system, provide an alternate compiler with XCC to ensure success. When compiling with an identical version of .Fx to the host, this option may be safely used. This option may also be safe when the host version of .Fx is close to the sources being built, but all bets are off if there have been any changes to the toolchain between the versions. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_BINUTILS_BOOTSTRAP .It .Va WITHOUT_CLANG_BOOTSTRAP .It .Va WITHOUT_ELFTOOLCHAIN_BOOTSTRAP .It .Va WITHOUT_GCC_BOOTSTRAP .El .It Va WITHOUT_CRYPT Set to not build any crypto code. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_KERBEROS .It .Va WITHOUT_KERBEROS_SUPPORT .It .Va WITHOUT_OPENSSH .It .Va WITHOUT_OPENSSL .El .Pp When set, these options are also in effect: .Pp .Bl -inset -compact .It Va WITHOUT_GSSAPI (unless .Va WITH_GSSAPI is set explicitly) .El .It Va WITH_CTF Set to compile with CTF (Compact C Type Format) data. CTF data encapsulates a reduced form of debugging information similar to DWARF and the venerable stabs and is required for DTrace. .It Va WITHOUT_CTM Set to not build .Xr ctm 1 and related utilities. .It Va WITHOUT_CUSE Set to not build CUSE-related programs and libraries. .It Va WITHOUT_CXGBETOOL Set to not build .Xr cxgbetool 8 .Pp This is a default setting on arm/arm, arm/armeb, arm/armv6, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32 and powerpc/powerpc. .It Va WITH_CXGBETOOL Set to build .Xr cxgbetool 8 .Pp This is a default setting on amd64/amd64, arm64/aarch64, i386/i386, pc98/i386, powerpc/powerpc64 and sparc64/sparc64. .It Va WITHOUT_CXX Set to not build .Xr c++ 1 and related libraries. It will also prevent building of .Xr gperf 1 and .Xr devd 8 . When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_CLANG .It .Va WITHOUT_CLANG_EXTRAS .It .Va WITHOUT_CLANG_FULL .It .Va WITHOUT_GNUCXX .It .Va WITHOUT_GROFF .El .It Va WITHOUT_DEBUG_FILES Set to avoid building or installing standalone debug files for each executable binary and shared library. .It Va WITHOUT_DIALOG Set to not build .Xr dialog 1 , .Xr dialog 3 , .Xr dpv 1 , and .Xr dpv 3 . When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_BSDINSTALL .El .It Va WITHOUT_DICT Set to not build the Webster dictionary files. .It Va WITH_DIRDEPS_BUILD This is an experimental build system. For details see http://www.crufty.net/sjg/docs/freebsd-meta-mode.htm. Build commands can be seen from the top-level with: .Dl make show-valid-targets The build is driven by dirdeps.mk using .Va DIRDEPS stored in Makefile.depend files found in each directory. .Pp The build can be started from anywhere, and behaves the same. The initial instance of .Xr make 1 recursively reads .Va DIRDEPS from .Pa Makefile.depend , computing a graph of tree dependencies from the current origin. Setting .Va NO_DIRDEPS skips checking dirdep dependencies and will only build in the current and child directories. .Va NO_DIRDEPS_BELOW skips building any dirdeps and only build the current directory. .Pp This also utilizes the .Va WITH_META_MODE logic for incremental builds. .Pp The build hides commands executed unless .Va NO_SILENT is defined. .Pp Note that there is currently no mass install feature for this. .Pp When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITH_INSTALL_AS_USER .El .Pp When set, these options are also in effect: .Pp .Bl -inset -compact .It Va WITHOUT_SYSTEM_COMPILER (unless .Va WITH_SYSTEM_COMPILER is set explicitly) .It Va WITH_AUTO_OBJ (unless .Va WITHOUT_AUTO_OBJ is set explicitly) .It Va WITH_META_MODE (unless .Va WITHOUT_META_MODE is set explicitly) .It Va WITH_STAGING (unless .Va WITHOUT_STAGING is set explicitly) .It Va WITH_STAGING_MAN (unless .Va WITHOUT_STAGING_MAN is set explicitly) .It Va WITH_STAGING_PROG (unless .Va WITHOUT_STAGING_PROG is set explicitly) .It Va WITH_SYSROOT (unless .Va WITHOUT_SYSROOT is set explicitly) .El .Pp This must be set in the environment, make command line, or .Pa /etc/src-env.conf , not .Pa /etc/src.conf . .It Va WITH_DIRDEPS_CACHE Cache result of dirdeps.mk which can save significant time for subsequent builds. Depends on .Va WITH_DIRDEPS_BUILD . .Pp This must be set in the environment, make command line, or .Pa /etc/src-env.conf , not .Pa /etc/src.conf . .It Va WITHOUT_DMAGENT Set to not build dma Mail Transport Agent. .It Va WITHOUT_DOCCOMPRESS Set to not install compressed system documentation. Only the uncompressed version will be installed. .It Va WITH_DTRACE_TESTS Set to build and install the DTrace test suite in .Pa /usr/tests/cddl/usr.sbin/dtrace . This test suite is considered experimental on architectures other than amd64/amd64 and running it may cause system instability. .It Va WITHOUT_DYNAMICROOT Set this if you do not want to link .Pa /bin and .Pa /sbin dynamically. .It Va WITHOUT_ED_CRYPTO Set to build .Xr ed 1 without support for encryption/decryption. .It Va WITHOUT_EE Set to not build and install .Xr edit 1 , .Xr ee 1 , and related programs. .It Va WITHOUT_EFI Set not to build .Xr efivar 3 and .Xr efivar 8 . .Pp This is a default setting on mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITH_EFI Set to build .Xr efivar 3 and .Xr efivar 8 . .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386 and pc98/i386. .It Va WITH_EISA Set to build EISA kernel modules. .It Va WITHOUT_ELFCOPY_AS_OBJCOPY Set to build and install .Xr objcopy 1 from GNU Binutils, instead of the one from ELF Tool Chain. This option is provided as a transition aid and will be removed in due time. .It Va WITHOUT_ELFTOOLCHAIN_BOOTSTRAP Set to not build ELF Tool Chain tools (addr2line, nm, size, strings and strip) as part of the bootstrap process. .Bf -symbolic An alternate bootstrap tool chain must be provided. .Ef .It Va WITHOUT_EXAMPLES Set to avoid installing examples to .Pa /usr/share/examples/ . .It Va WITH_EXTRA_TCP_STACKS Set to build extra TCP stack modules. .It Va WITHOUT_FDT Set to not build Flattened Device Tree support as part of the base system. This includes the device tree compiler (dtc) and libfdt support library. .It Va WITHOUT_FILE Set to not build .Xr file 1 and related programs. .It Va WITHOUT_FINGER Set to not build or install .Xr finger 1 and .Xr fingerd 8 . .It Va WITHOUT_FLOPPY Set to not build or install programs for operating floppy disk driver. .It Va WITHOUT_FMTREE Set to not build and install .Pa /usr/sbin/fmtree . .It Va WITHOUT_FORMAT_EXTENSIONS Set to not enable .Fl fformat-extensions when compiling the kernel. Also disables all format checking. .It Va WITHOUT_FORTH Set to build bootloaders without Forth support. .It Va WITHOUT_FP_LIBC Set to build .Nm libc without floating-point support. .It Va WITHOUT_FREEBSD_UPDATE Set to not build .Xr freebsd-update 8 . .It Va WITHOUT_FTP Set to not build or install .Xr ftp 1 and .Xr ftpd 8 . .It Va WITHOUT_GAMES Set to not build games. .It Va WITHOUT_GCC Set to not build and install gcc and g++ as part of the normal build process. .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386 and pc98/i386. .It Va WITH_GCC Set to build and install gcc and g++. .Pp This is a default setting on mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITHOUT_GCC_BOOTSTRAP Set to not build gcc and g++ as part of the bootstrap process. You must enable either gcc or clang bootstrap to be able to build the system, unless an alternative compiler is provided via XCC. .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386 and pc98/i386. .It Va WITH_GCC_BOOTSTRAP Set to build gcc and g++ as part of the bootstrap process. .Pp This is a default setting on mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITHOUT_GCOV Set to not build the .Xr gcov 1 tool. .It Va WITHOUT_GDB Set to not build .Xr gdb 1 . .Pp This is a default setting on arm64/aarch64. .It Va WITH_GDB Set to build .Xr gdb 1 . .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, pc98/i386, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITHOUT_GNU Set to not build contributed GNU software as a part of the base system. This option can be useful if the system built must not contain any code covered by the GNU Public License due to legal reasons. .Bf -symbolic The option has no effect yet. .Ef When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_GNU_SUPPORT .El .It Va WITHOUT_GNUCXX Do not build the GNU C++ stack (g++, libstdc++). This is the default on platforms where clang is the system compiler. .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386 and pc98/i386. .It Va WITH_GNUCXX Build the GNU C++ stack (g++, libstdc++). This is the default on platforms where gcc is the system compiler. .Pp This is a default setting on mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITHOUT_GNU_GREP_COMPAT Set this option to omit the gnu extensions to grep from being included in BSD grep. .It Va WITHOUT_GNU_SUPPORT Set to build some programs without optional GNU support. .It Va WITHOUT_GPIO Set to not build .Xr gpioctl 8 as part of the base system. .It Va WITHOUT_GPL_DTC Set to build the BSD licensed version of the device tree compiler rather than the GPLed one from elinux.org. .It Va WITHOUT_GROFF Set to not build .Xr groff 1 and .Xr vgrind 1 . You should consider installing the textproc/groff port to not break .Xr man 1 . .It Va WITHOUT_GSSAPI Set to not build libgssapi. .It Va WITHOUT_HAST Set to not build .Xr hastd 8 and related utilities. .It Va WITH_HESIOD Set to build Hesiod support. .It Va WITHOUT_HTML Set to not build HTML docs. .It Va WITHOUT_HYPERV Set to not build or install HyperV utilities. .It Va WITHOUT_ICONV Set to not build iconv as part of libc. .It Va WITHOUT_INCLUDES Set to not install header files. This option used to be spelled .Va NO_INCS . .Bf -symbolic The option does not work for build targets. .Ef .It Va WITHOUT_INET Set to not build programs and libraries related to IPv4 networking. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_INET_SUPPORT .El .It Va WITHOUT_INET6 Set to not build programs and libraries related to IPv6 networking. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_INET6_SUPPORT .El .It Va WITHOUT_INET6_SUPPORT Set to build libraries, programs, and kernel modules without IPv6 support. .It Va WITHOUT_INETD Set to not build .Xr inetd 8 . .It Va WITHOUT_INET_SUPPORT Set to build libraries, programs, and kernel modules without IPv4 support. .It Va WITHOUT_INSTALLLIB Set this if to not install optional libraries. For example, when creating a .Xr nanobsd 8 image. .Bf -symbolic The option does not work for build targets. .Ef .It Va WITH_INSTALL_AS_USER Set to make install targets succeed for non-root users by installing files with owner and group attributes set to that of the user running the .Xr make 1 command. The user still must set the .Va DESTDIR variable to point to a directory where the user has write permissions. .It Va WITHOUT_IPFILTER Set to not build IP Filter package. .It Va WITHOUT_IPFW Set to not build IPFW tools. .It Va WITHOUT_IPSEC_SUPPORT Set to not build the kernel with .Xr ipsec 4 support. This option is needed for .Xr ipsec 4 and .Xr tcpmd5 4 . .It Va WITHOUT_ISCSI Set to not build .Xr iscid 8 and related utilities. .It Va WITHOUT_JAIL Set to not build tools for the support of jails; e.g., .Xr jail 8 . .It Va WITHOUT_KDUMP Set to not build .Xr kdump 1 and .Xr truss 1 . .It Va WITHOUT_KERBEROS Set this to not build Kerberos 5 (KTH Heimdal). When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_KERBEROS_SUPPORT .El .Pp When set, these options are also in effect: .Pp .Bl -inset -compact .It Va WITHOUT_GSSAPI (unless .Va WITH_GSSAPI is set explicitly) .El .It Va WITHOUT_KERBEROS_SUPPORT Set to build some programs without Kerberos support, like .Xr ssh 1 , .Xr telnet 1 , .Xr sshd 8 , and .Xr telnetd 8 . .It Va WITHOUT_KERNEL_SYMBOLS Set to not install kernel symbol files. .Bf -symbolic This option is recommended for those people who have small root partitions. .Ef .It Va WITHOUT_KVM Set to not build the .Nm libkvm library as a part of the base system. .Bf -symbolic The option has no effect yet. .Ef When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_KVM_SUPPORT .El .It Va WITHOUT_KVM_SUPPORT Set to build some programs without optional .Nm libkvm support. .It Va WITHOUT_LDNS Setting this variable will prevent the LDNS library from being built. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_LDNS_UTILS .It .Va WITHOUT_UNBOUND .El .It Va WITHOUT_LDNS_UTILS Setting this variable will prevent building the LDNS utilities .Xr drill 1 and .Xr host 1 . .It Va WITHOUT_LEGACY_CONSOLE Set to not build programs that support a legacy PC console; e.g., .Xr kbdcontrol 1 and .Xr vidcontrol 1 . .It Va WITHOUT_LIB32 On 64-bit platforms, set to not build 32-bit library set and a .Nm ld-elf32.so.1 runtime linker. .It Va WITHOUT_LIBCPLUSPLUS Set to avoid building libcxxrt and libc++. .It Va WITHOUT_LIBPTHREAD Set to not build the .Nm libpthread providing library, .Nm libthr . When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_LIBTHR .El .It Va WITH_LIBSOFT On armv6 only, set to enable soft float ABI compatibility libraries. This option is for transitioning to the new hard float ABI. .It Va WITHOUT_LIBTHR Set to not build the .Nm libthr (1:1 threading) library. +.It Va WITH_LINT +Set to build the lint binaries and library. .It Va WITHOUT_LLD Set to not build LLVM's lld linker. .Pp This is a default setting on mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITH_LLD Set to build LLVM's lld linker. .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386 and pc98/i386. .It Va WITHOUT_LLDB Set to not build the LLDB debugger. .Pp This is a default setting on arm/arm, arm/armeb, arm/armv6, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, pc98/i386, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITH_LLDB Set to build the LLDB debugger. .Pp This is a default setting on amd64/amd64 and arm64/aarch64. .It Va WITHOUT_LLD_BOOTSTRAP Set to not build the LLD linker during the bootstrap phase of the build. To be able to build the system, either Binutils or LLD bootstrap must be enabled unless an alternate linker is provided via XLD. .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, pc98/i386, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITH_LLD_BOOTSTRAP Set to build the LLD linker during the bootstrap phase of the build. .Pp This is a default setting on arm64/aarch64. .It Va WITHOUT_LLD_IS_LD Set to use GNU binutils ld as the system linker, instead of LLVM's LLD. .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, pc98/i386, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITH_LLD_IS_LD Set to use LLVM's LLD as the system linker, instead of GNU binutils ld. .Pp This is a default setting on arm64/aarch64. .It Va WITHOUT_LLVM_LIBUNWIND Set to use GCC's stack unwinder (instead of LLVM's libunwind). .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mips64, mips/mipsn32, pc98/i386, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITH_LLVM_LIBUNWIND Set to use LLVM's libunwind stack unwinder (instead of GCC's unwinder). .Pp This is a default setting on arm64/aarch64. .It Va WITHOUT_LOCALES Set to not build localization files; see .Xr locale 1 . .It Va WITHOUT_LOCATE Set to not build .Xr locate 1 and related programs. .It Va WITHOUT_LPR Set to not build .Xr lpr 1 and related programs. .It Va WITHOUT_LS_COLORS Set to build .Xr ls 1 without support for colors to distinguish file types. .It Va WITHOUT_LZMA_SUPPORT Set to build some programs without optional lzma compression support. .It Va WITHOUT_MAIL Set to not build any mail support (MUA or MTA). When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_DMAGENT .It .Va WITHOUT_MAILWRAPPER .It .Va WITHOUT_SENDMAIL .El .It Va WITHOUT_MAILWRAPPER Set to not build the .Xr mailwrapper 8 MTA selector. .It Va WITHOUT_MAKE Set to not install .Xr make 1 and related support files. .It Va WITHOUT_MAN Set to not build manual pages. When set, these options are also in effect: .Pp .Bl -inset -compact .It Va WITHOUT_MAN_UTILS (unless .Va WITH_MAN_UTILS is set explicitly) .El .It Va WITHOUT_MANCOMPRESS Set to not to install compressed man pages. Only the uncompressed versions will be installed. .It Va WITHOUT_MANDOCDB Use the version of .Xr makewhatis 1 introduced in .Fx 2.1 , instead of the .Xr makewhatis 8 database and utilities from .Xr mandoc 1 . .It Va WITHOUT_MAN_UTILS Set to not build utilities for manual pages, .Xr apropos 1 , .Xr catman 1 , .Xr makewhatis 1 , .Xr man 1 , .Xr whatis 1 , .Xr manctl 8 , and related support files. .It Va WITH_META_MODE Create .Xr make 1 meta files when building, which can provide a reliable incremental build when using .Xr filemon 4 . The meta file is created in OBJDIR as .Pa target.meta . These meta files track the command that was executed, its output, and the current directory. The .Xr filemon 4 module is required unless .Va NO_FILEMON is defined. When the module is loaded, any files used by the commands executed are tracked as dependencies for the target in its meta file. The target is considered out-of-date and rebuilt if any of these conditions are true compared to the last build: .Bl -bullet -compact .It The command to execute changes. .It The current working directory changes. .It The target's meta file is missing. .It The target's meta file is missing filemon data when filemon is loaded and a previous run did not have it loaded. .It [requires .Xr filemon 4 ] Files read, executed or linked to are newer than the target. .It [requires .Xr filemon 4 ] Files read, written, executed or linked are missing. .El The meta files can also be useful for debugging. .Pp The build hides commands that are executed unless .Va NO_SILENT is defined. Errors cause .Xr make 1 to show some of its environment for further debugging. .Pp The build operates as it normally would otherwise. This option originally invoked a different build system but that was renamed to .Va WITH_DIRDEPS_BUILD . .Pp Currently this also enforces .Va WITHOUT_SYSTEM_COMPILER . When set, these options are also in effect: .Pp .Bl -inset -compact .It Va WITHOUT_SYSTEM_COMPILER (unless .Va WITH_SYSTEM_COMPILER is set explicitly) .El .Pp This must be set in the environment, make command line, or .Pa /etc/src-env.conf , not .Pa /etc/src.conf . .It Va WITH_NAND Set to build the NAND Flash components. .It Va WITHOUT_NDIS Set to not build programs and libraries related to NDIS emulation support. .It Va WITHOUT_NETCAT Set to not build .Xr nc 1 utility. .It Va WITHOUT_NETGRAPH Set to not build applications to support .Xr netgraph 4 . When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_ATM .It .Va WITHOUT_BLUETOOTH .It .Va WITHOUT_NETGRAPH_SUPPORT .El .It Va WITHOUT_NETGRAPH_SUPPORT Set to build libraries, programs, and kernel modules without netgraph support. .It Va WITHOUT_NIS Set to not build .Xr NIS 8 support and related programs. If set, you might need to adopt your .Xr nsswitch.conf 5 and remove .Sq nis entries. .It Va WITHOUT_NLS Set to not build NLS catalogs. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_NLS_CATALOGS .El .It Va WITHOUT_NLS_CATALOGS Set to not build NLS catalog support for .Xr csh 1 . .It Va WITHOUT_NS_CACHING Set to disable name caching in the .Pa nsswitch subsystem. The generic caching daemon, .Xr nscd 8 , will not be built either if this option is set. .It Va WITHOUT_NTP Set to not build .Xr ntpd 8 and related programs. .It Va WITH_OFED Set to build the .Dq "OpenFabrics Enterprise Distribution" Infiniband software stack. .It Va WITH_OPENLDAP Enable building openldap support for kerberos. .It Va WITHOUT_OPENSSH Set to not build OpenSSH. .It Va WITHOUT_OPENSSL Set to not build OpenSSL. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_KERBEROS .It .Va WITHOUT_KERBEROS_SUPPORT .It .Va WITHOUT_OPENSSH .El .Pp When set, these options are also in effect: .Pp .Bl -inset -compact .It Va WITHOUT_GSSAPI (unless .Va WITH_GSSAPI is set explicitly) .El .It Va WITHOUT_PAM Set to not build PAM library and modules. .Bf -symbolic This option is deprecated and does nothing. .Ef When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_PAM_SUPPORT .El .It Va WITHOUT_PAM_SUPPORT Set to build some programs without PAM support, particularly .Xr ftpd 8 and .Xr ppp 8 . .It Va WITHOUT_PC_SYSINSTALL Set to not build .Xr pc-sysinstall 8 and related programs. .It Va WITHOUT_PF Set to not build PF firewall package. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_AUTHPF .El .It Va WITHOUT_PKGBOOTSTRAP Set to not build .Xr pkg 7 bootstrap tool. .It Va WITHOUT_PMC Set to not build .Xr pmccontrol 8 and related programs. .It Va WITHOUT_PORTSNAP Set to not build or install .Xr portsnap 8 and related files. .It Va WITHOUT_PPP Set to not build .Xr ppp 8 and related programs. .It Va WITHOUT_PROFILE Set to not build profiled libraries for use with .Xr gprof 8 . .Pp This is a default setting on mips/mips64el and mips/mips64. .It Va WITH_PROFILE Set to build profiled libraries for use with .Xr gprof 8 . .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mipsn32, pc98/i386, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITHOUT_PROFILE Set to not build profiled libraries for use with .Xr gprof 8 . .Pp This is a default setting on mips/mips64el. .It Va WITH_PROFILE Set to build profiled libraries for use with .Xr gprof 8 . .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64, mips/mipsn32, pc98/i386, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITHOUT_PROFILE Set to not build profiled libraries for use with .Xr gprof 8 . .Pp This is a default setting on mips/mips64. .It Va WITH_PROFILE Set to build profiled libraries for use with .Xr gprof 8 . .Pp This is a default setting on amd64/amd64, arm/arm, arm/armeb, arm/armv6, arm64/aarch64, i386/i386, mips/mipsel, mips/mips, mips/mips64el, mips/mipsn32, pc98/i386, powerpc/powerpc, powerpc/powerpc64 and sparc64/sparc64. .It Va WITHOUT_PROFILE Set to not build profiled libraries for use with .Xr gprof 8 . .It Va WITHOUT_QUOTAS Set to not build .Xr quota 1 and related programs. .It Va WITHOUT_RADIUS_SUPPORT Set to not build radius support into various applications, like .Xr pam_radius 8 and .Xr ppp 8 . .It Va WITHOUT_RBOOTD Set to not build or install .Xr rbootd 8 . .It Va WITHOUT_RCMDS Disable building of the .Bx r-commands. This includes .Xr rlogin 1 , .Xr rsh 1 , etc. .It Va WITHOUT_RCS Set to not build .Xr rcs 1 , .Xr etcupdate 8 , and related utilities. .It Va WITH_REPRODUCIBLE_BUILD Set to exclude build metadata (such as the build time, user, or host) from the kernel, boot loaders, and uname output, so that builds produce bit-for-bit identical output. .It Va WITHOUT_RESCUE Set to not build .Xr rescue 8 . .It Va WITHOUT_ROUTED Set to not build .Xr routed 8 utility. .It Va WITH_RPCBIND_WARMSTART_SUPPORT Set to build .Xr rpcbind 8 with warmstart support. .It Va WITHOUT_SENDMAIL Set to not build .Xr sendmail 8 and related programs. .It Va WITHOUT_SETUID_LOGIN Set this to disable the installation of .Xr login 1 as a set-user-ID root program. .It Va WITHOUT_SHAREDOCS Set to not build the .Bx 4.4 legacy docs. .It Va WITH_SHARED_TOOLCHAIN Set to build the toolchain binaries shared. The set includes .Xr cc 1 , .Xr make 1 and necessary utilities like assembler, linker and library archive manager. .It Va WITH_SORT_THREADS Set to enable threads in .Xr sort 1 . .It Va WITHOUT_SOURCELESS Set to not build kernel modules that include sourceless code (either microcode or native code for host CPU). When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_SOURCELESS_HOST .It .Va WITHOUT_SOURCELESS_UCODE .El .It Va WITHOUT_SOURCELESS_HOST Set to not build kernel modules that include sourceless native code for host CPU. .It Va WITHOUT_SOURCELESS_UCODE Set to not build kernel modules that include sourceless microcode. .It Va WITHOUT_SSP Set to not build world with propolice stack smashing protection. .It Va WITH_STAGING Enable staging of files to a stage tree. This can be best thought of as auto-install to .Va DESTDIR with some extra meta data to ensure dependencies can be tracked. Depends on .Va WITH_DIRDEPS_BUILD . When set, these options are also in effect: .Pp .Bl -inset -compact .It Va WITH_STAGING_MAN (unless .Va WITHOUT_STAGING_MAN is set explicitly) .It Va WITH_STAGING_PROG (unless .Va WITHOUT_STAGING_PROG is set explicitly) .El .Pp This must be set in the environment, make command line, or .Pa /etc/src-env.conf , not .Pa /etc/src.conf . .It Va WITH_STAGING_MAN Enable staging of man pages to stage tree. .It Va WITH_STAGING_PROG Enable staging of PROGs to stage tree. .It Va WITH_STALE_STAGED Check staged files are not stale. .It Va WITH_SVN Set to install .Xr svnlite 1 as .Xr svn 1 . .It Va WITHOUT_SVNLITE Set to not build .Xr svnlite 1 and related programs. .It Va WITHOUT_SYMVER Set to disable symbol versioning when building shared libraries. .It Va WITHOUT_SYSCONS Set to not build .Xr syscons 4 support files such as keyboard maps, fonts, and screen output maps. .It Va WITH_SYSROOT Enable use of sysroot during build. Depends on .Va WITH_DIRDEPS_BUILD . .Pp This must be set in the environment, make command line, or .Pa /etc/src-env.conf , not .Pa /etc/src.conf . .It Va WITHOUT_SYSTEM_COMPILER Set to not opportunistically skip building a cross-compiler during the bootstrap phase of the build. Normally, if the currently installed compiler matches the planned bootstrap compiler type and revision, then it will not be built. This does not prevent a compiler from being built for installation though, only for building one for the build itself. The .Va WITHOUT_CLANG and .Va WITHOUT_GCC options control those. .It Va WITHOUT_TALK Set to not build or install .Xr talk 1 and .Xr talkd 8 . .It Va WITHOUT_TCP_WRAPPERS Set to not build or install .Xr tcpd 8 , and related utilities. .It Va WITHOUT_TCSH Set to not build and install .Pa /bin/csh (which is .Xr tcsh 1 ) . .It Va WITHOUT_TELNET Set to not build .Xr telnet 1 and related programs. .It Va WITHOUT_TESTS Set to not build nor install the .Fx Test Suite in .Pa /usr/tests/ . See .Xr tests 7 for more details. This also disables the build of all test-related dependencies, including ATF. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_DTRACE_TESTS .It .Va WITHOUT_TESTS_SUPPORT .El .It Va WITHOUT_TESTS_SUPPORT Set to disables the build of all test-related dependencies, including ATF. .It Va WITHOUT_TEXTPROC Set to not build programs used for text processing. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_GROFF .El .It Va WITHOUT_TFTP Set to not build or install .Xr tftp 1 and .Xr tftpd 8 . .It Va WITHOUT_TIMED Set to not build or install .Xr timed 8 . .It Va WITHOUT_TOOLCHAIN Set to not install header or programs used for program development, compilers, debuggers etc. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_BINUTILS .It .Va WITHOUT_CLANG .It .Va WITHOUT_CLANG_EXTRAS .It .Va WITHOUT_CLANG_FULL .It .Va WITHOUT_GCC .It .Va WITHOUT_GDB .It .Va WITHOUT_INCLUDES .It .Va WITHOUT_LLD .It .Va WITHOUT_LLDB .El .It Va WITHOUT_UNBOUND Set to not build .Xr unbound 8 and related programs. .It Va WITHOUT_USB Set to not build USB-related programs and libraries. .It Va WITHOUT_USB_GADGET_EXAMPLES Set to not build USB gadget kernel modules. .It Va WITHOUT_UTMPX Set to not build user accounting tools such as .Xr last 1 , .Xr users 1 , .Xr who 1 , .Xr ac 8 , .Xr lastlogin 8 and .Xr utx 8 . .It Va WITHOUT_VI Set to not build and install vi, view, ex and related programs. .It Va WITHOUT_VT Set to not build .Xr vt 4 support files (fonts and keymaps). .It Va WITHOUT_WARNS Set this to not add warning flags to the compiler invocations. Useful as a temporary workaround when code enters the tree which triggers warnings in environments that differ from the original developer. .It Va WITHOUT_WIRELESS Set to not build programs used for 802.11 wireless networks; especially .Xr wpa_supplicant 8 and .Xr hostapd 8 . When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_WIRELESS_SUPPORT .El .It Va WITHOUT_WIRELESS_SUPPORT Set to build libraries, programs, and kernel modules without 802.11 wireless support. .It Va WITHOUT_WPA_SUPPLICANT_EAPOL Build .Xr wpa_supplicant 8 without support for the IEEE 802.1X protocol and without support for EAP-PEAP, EAP-TLS, EAP-LEAP, and EAP-TTLS protocols (usable only via 802.1X). .It Va WITHOUT_ZFS Set to not build ZFS file system. .It Va WITHOUT_ZONEINFO Set to not build the timezone database. When set, it enforces these options: .Pp .Bl -item -compact .It .Va WITHOUT_ZONEINFO_LEAPSECONDS_SUPPORT .It .Va WITHOUT_ZONEINFO_OLD_TIMEZONES_SUPPORT .El .It Va WITH_ZONEINFO_LEAPSECONDS_SUPPORT Set to build leapsecond information in to the timezone database. .It Va WITH_ZONEINFO_OLD_TIMEZONES_SUPPORT Set to build backward compatibility timezone aliases in to the timezone database. .El .Sh FILES .Bl -tag -compact -width Pa .It Pa /etc/src.conf .It Pa /etc/src-env.conf .It Pa /usr/share/mk/bsd.own.mk .El .Sh SEE ALSO .Xr make 1 , .Xr make.conf 5 , .Xr build 7 , .Xr ports 7 .Sh HISTORY The .Nm file appeared in .Fx 7.0 . .Sh AUTHORS This manual page was autogenerated by .An tools/build/options/makeman . Index: stable/11/share/mk/src.opts.mk =================================================================== --- stable/11/share/mk/src.opts.mk (revision 327836) +++ stable/11/share/mk/src.opts.mk (revision 327837) @@ -1,474 +1,475 @@ # $FreeBSD$ # # Option file for FreeBSD /usr/src builds. # # Users define WITH_FOO and WITHOUT_FOO on the command line or in /etc/src.conf # and /etc/make.conf files. These translate in the build system to MK_FOO={yes,no} # with sensible (usually) defaults. # # Makefiles must include bsd.opts.mk after defining specific MK_FOO options that # are applicable for that Makefile (typically there are none, but sometimes there # are exceptions). Recursive makes usually add MK_FOO=no for options that they wish # to omit from that make. # # Makefiles must include bsd.mkopt.mk before they test the value of any MK_FOO # variable. # # Makefiles may also assume that this file is included by src.opts.mk should it # need variables defined there prior to the end of the Makefile where # bsd.{subdir,lib.bin}.mk is traditionally included. # # The old-style YES_FOO and NO_FOO are being phased out. No new instances of them # should be added. Old instances should be removed since they were just to # bridge the gap between FreeBSD 4 and FreeBSD 5. # # Makefiles should never test WITH_FOO or WITHOUT_FOO directly (although an # exception is made for _WITHOUT_SRCONF which turns off this mechanism # completely inside bsd.*.mk files). # .if !target(____) ____: .include # # Define MK_* variables (which are either "yes" or "no") for users # to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the # make(1) environment. # These should be tested with `== "no"' or `!= "no"' in makefiles. # The NO_* variables should only be set by makefiles for variables # that haven't been converted over. # # These options are used by src the builds __DEFAULT_YES_OPTIONS = \ ACCT \ ACPI \ AMD \ APM \ AT \ ATM \ AUDIT \ AUTHPF \ AUTOFS \ BHYVE \ BINUTILS \ BINUTILS_BOOTSTRAP \ BLACKLIST \ BLUETOOTH \ BOOT \ BOOTPARAMD \ BOOTPD \ BSD_CPIO \ BSD_GREP_FASTMATCH \ BSDINSTALL \ BSNMP \ BZIP2 \ CALENDAR \ CAPSICUM \ CASPER \ CCD \ CDDL \ CPP \ CROSS_COMPILER \ CRYPT \ CTM \ CUSE \ CXX \ DIALOG \ DICT \ DMAGENT \ DYNAMICROOT \ ED_CRYPTO \ EE \ ELFCOPY_AS_OBJCOPY \ EFI \ ELFTOOLCHAIN_BOOTSTRAP \ EXAMPLES \ FDT \ FILE \ FINGER \ FLOPPY \ FMTREE \ FORTH \ FP_LIBC \ FREEBSD_UPDATE \ FTP \ GAMES \ GCOV \ GDB \ GNU \ GNU_GREP_COMPAT \ GPIO \ GPL_DTC \ GROFF \ HAST \ HTML \ HYPERV \ ICONV \ INET \ INET6 \ INETD \ IPFILTER \ IPFW \ ISCSI \ JAIL \ KDUMP \ KVM \ LDNS \ LDNS_UTILS \ LEGACY_CONSOLE \ LIB32 \ LIBPTHREAD \ LIBTHR \ LOCALES \ LOCATE \ LPR \ LS_COLORS \ LZMA_SUPPORT \ MAIL \ MAILWRAPPER \ MAKE \ MANDOCDB \ NDIS \ NETCAT \ NETGRAPH \ NLS_CATALOGS \ NS_CACHING \ NTP \ OPENSSL \ PAM \ PC_SYSINSTALL \ PF \ PKGBOOTSTRAP \ PMC \ PORTSNAP \ PPP \ QUOTAS \ RADIUS_SUPPORT \ RCMDS \ RBOOTD \ RCS \ RESCUE \ ROUTED \ SENDMAIL \ SETUID_LOGIN \ SHAREDOCS \ SOURCELESS \ SOURCELESS_HOST \ SOURCELESS_UCODE \ SVNLITE \ SYSCONS \ SYSTEM_COMPILER \ TALK \ TCP_WRAPPERS \ TCSH \ TELNET \ TESTS \ TEXTPROC \ TFTP \ TIMED \ UNBOUND \ USB \ UTMPX \ VI \ VT \ WIRELESS \ WPA_SUPPLICANT_EAPOL \ ZFS \ ZONEINFO __DEFAULT_NO_OPTIONS = \ BSD_GREP \ CLANG_EXTRAS \ DTRACE_TESTS \ EISA \ HESIOD \ LIBSOFT \ + LINT \ NAND \ OFED \ OPENLDAP \ REPRODUCIBLE_BUILD \ RPCBIND_WARMSTART_SUPPORT \ SHARED_TOOLCHAIN \ SORT_THREADS \ SVN \ ZONEINFO_LEAPSECONDS_SUPPORT \ ZONEINFO_OLD_TIMEZONES_SUPPORT \ # # Default behaviour of some options depends on the architecture. Unfortunately # this means that we have to test TARGET_ARCH (the buildworld case) as well # as MACHINE_ARCH (the non-buildworld case). Normally TARGET_ARCH is not # used at all in bsd.*.mk, but we have to make an exception here if we want # to allow defaults for some things like clang to vary by target architecture. # Additional, per-target behavior should be rarely added only after much # gnashing of teeth and grinding of gears. # .if defined(TARGET_ARCH) __T=${TARGET_ARCH} .else __T=${MACHINE_ARCH} .endif .if defined(TARGET) __TT=${TARGET} .else __TT=${MACHINE} .endif .include # If the compiler is not C++11 capable, disable Clang and use GCC instead. # This means that architectures that have GCC 4.2 as default can not # build Clang without using an external compiler. .if ${COMPILER_FEATURES:Mc++11} && (${__T} == "aarch64" || \ ${__T} == "amd64" || ${__TT} == "arm" || ${__T} == "i386") # Clang is enabled, and will be installed as the default /usr/bin/cc. __DEFAULT_YES_OPTIONS+=CLANG CLANG_BOOTSTRAP CLANG_FULL CLANG_IS_CC LLD __DEFAULT_NO_OPTIONS+=GCC GCC_BOOTSTRAP GNUCXX .elif ${COMPILER_FEATURES:Mc++11} && ${__T} != "riscv64" && ${__T} != "sparc64" # If an external compiler that supports C++11 is used as ${CC} and Clang # supports the target, then Clang is enabled but GCC is installed as the # default /usr/bin/cc. __DEFAULT_YES_OPTIONS+=CLANG CLANG_FULL GCC GCC_BOOTSTRAP GNUCXX __DEFAULT_NO_OPTIONS+=CLANG_BOOTSTRAP CLANG_IS_CC LLD .else # Everything else disables Clang, and uses GCC instead. __DEFAULT_YES_OPTIONS+=GCC GCC_BOOTSTRAP GNUCXX __DEFAULT_NO_OPTIONS+=CLANG CLANG_BOOTSTRAP CLANG_FULL CLANG_IS_CC LLD .endif # In-tree binutils/gcc are older versions without modern architecture support. .if ${__T} == "aarch64" || ${__T} == "riscv64" BROKEN_OPTIONS+=BINUTILS BINUTILS_BOOTSTRAP GCC GCC_BOOTSTRAP GDB __DEFAULT_YES_OPTIONS+=LLVM_LIBUNWIND .else __DEFAULT_NO_OPTIONS+=LLVM_LIBUNWIND .endif .if ${__T} == "riscv64" BROKEN_OPTIONS+=PROFILE # "sorry, unimplemented: profiler support for RISC-V" BROKEN_OPTIONS+=TESTS # "undefined reference to `_Unwind_Resume'" BROKEN_OPTIONS+=CXX # "libcxxrt.so: undefined reference to `_Unwind_Resume_or_Rethrow'" .endif .if ${__T} == "aarch64" __DEFAULT_YES_OPTIONS+=LLD_BOOTSTRAP LLD_IS_LD .else __DEFAULT_NO_OPTIONS+=LLD_BOOTSTRAP LLD_IS_LD .endif .if ${__T} == "aarch64" || ${__T} == "amd64" __DEFAULT_YES_OPTIONS+=LLDB .else __DEFAULT_NO_OPTIONS+=LLDB .endif # LLVM lacks support for FreeBSD 64-bit atomic operations for ARMv4/ARMv5 .if ${__T} == "arm" || ${__T} == "armeb" BROKEN_OPTIONS+=LLDB .endif # Only doing soft float API stuff on armv6 .if ${__T} != "armv6" BROKEN_OPTIONS+=LIBSOFT .endif .if ${__T:Mmips*} || ${__T:Mpowerpc*} || ${__T:Msparc64} || ${__T:Mriscv*} BROKEN_OPTIONS+=EFI .endif .if ${__T:Mmips64*} # profiling won't work on MIPS64 because there is only assembly for o32 BROKEN_OPTIONS+=PROFILE .endif .if ${__T} == "aarch64" || ${__T} == "amd64" || ${__T} == "i386" || \ ${__T} == "powerpc64" || ${__T} == "sparc64" __DEFAULT_YES_OPTIONS+=CXGBETOOL .else __DEFAULT_NO_OPTIONS+=CXGBETOOL .endif .include # # MK_* options that default to "yes" if the compiler is a C++11 compiler. # .for var in \ LIBCPLUSPLUS .if !defined(MK_${var}) .if ${COMPILER_FEATURES:Mc++11} .if defined(WITHOUT_${var}) MK_${var}:= no .else MK_${var}:= yes .endif .else .if defined(WITH_${var}) MK_${var}:= yes .else MK_${var}:= no .endif .endif .endif .endfor # # Force some options off if their dependencies are off. # Order is somewhat important. # .if ${MK_CAPSICUM} == "no" MK_CASPER:= no .endif .if ${MK_LIBPTHREAD} == "no" MK_LIBTHR:= no .endif .if ${MK_LDNS} == "no" MK_LDNS_UTILS:= no MK_UNBOUND:= no .endif .if ${MK_SOURCELESS} == "no" MK_SOURCELESS_HOST:= no MK_SOURCELESS_UCODE:= no .endif .if ${MK_CDDL} == "no" MK_ZFS:= no MK_CTF:= no .endif .if ${MK_CRYPT} == "no" MK_OPENSSL:= no MK_OPENSSH:= no MK_KERBEROS:= no .endif .if ${MK_CXX} == "no" MK_CLANG:= no MK_GROFF:= no MK_GNUCXX:= no .endif .if ${MK_DIALOG} == "no" MK_BSDINSTALL:= no .endif .if ${MK_MAIL} == "no" MK_MAILWRAPPER:= no MK_SENDMAIL:= no MK_DMAGENT:= no .endif .if ${MK_NETGRAPH} == "no" MK_ATM:= no MK_BLUETOOTH:= no .endif .if ${MK_NLS} == "no" MK_NLS_CATALOGS:= no .endif .if ${MK_OPENSSL} == "no" MK_OPENSSH:= no MK_KERBEROS:= no .endif .if ${MK_PF} == "no" MK_AUTHPF:= no .endif .if ${MK_TESTS} == "no" MK_DTRACE_TESTS:= no .endif .if ${MK_TEXTPROC} == "no" MK_GROFF:= no .endif .if ${MK_ZONEINFO} == "no" MK_ZONEINFO_LEAPSECONDS_SUPPORT:= no MK_ZONEINFO_OLD_TIMEZONES_SUPPORT:= no .endif .if ${MK_CROSS_COMPILER} == "no" MK_BINUTILS_BOOTSTRAP:= no MK_CLANG_BOOTSTRAP:= no MK_ELFTOOLCHAIN_BOOTSTRAP:= no MK_GCC_BOOTSTRAP:= no .endif .if ${MK_META_MODE} == "yes" MK_SYSTEM_COMPILER:= no .endif .if ${MK_TOOLCHAIN} == "no" MK_BINUTILS:= no MK_CLANG:= no MK_GCC:= no MK_GDB:= no MK_INCLUDES:= no MK_LLD:= no MK_LLDB:= no .endif .if ${MK_CLANG} == "no" MK_CLANG_EXTRAS:= no MK_CLANG_FULL:= no .endif # # MK_* options whose default value depends on another option. # .for vv in \ GSSAPI/KERBEROS \ MAN_UTILS/MAN .if defined(WITH_${vv:H}) MK_${vv:H}:= yes .elif defined(WITHOUT_${vv:H}) MK_${vv:H}:= no .else MK_${vv:H}:= ${MK_${vv:T}} .endif .endfor # # Set defaults for the MK_*_SUPPORT variables. # # # MK_*_SUPPORT options which default to "yes" unless their corresponding # MK_* variable is set to "no". # .for var in \ BLACKLIST \ BZIP2 \ GNU \ INET \ INET6 \ KERBEROS \ KVM \ NETGRAPH \ PAM \ TESTS \ WIRELESS .if defined(WITHOUT_${var}_SUPPORT) || ${MK_${var}} == "no" MK_${var}_SUPPORT:= no .else MK_${var}_SUPPORT:= yes .endif .endfor .if !${COMPILER_FEATURES:Mc++11} MK_LLDB:= no .endif # gcc 4.8 and newer supports libc++, so suppress gnuc++ in that case. # while in theory we could build it with that, we don't want to do # that since it creates too much confusion for too little gain. # XXX: This is incomplete and needs X_COMPILER_TYPE/VERSION checks too # to prevent Makefile.inc1 from bootstrapping unneeded dependencies # and to support 'make delete-old' when supplying an external toolchain. .if ${COMPILER_TYPE} == "gcc" && ${COMPILER_VERSION} >= 40800 MK_GNUCXX:=no MK_GCC:=no .endif .endif # !target(____) Index: stable/11/usr.bin/Makefile =================================================================== --- stable/11/usr.bin/Makefile (revision 327836) +++ stable/11/usr.bin/Makefile (revision 327837) @@ -1,316 +1,316 @@ # From: @(#)Makefile 8.3 (Berkeley) 1/7/94 # $FreeBSD$ .include # XXX MISSING: deroff diction graph learn plot # spell spline struct xsend # XXX Use GNU versions: diff ld patch # Moved to secure: bdes # SUBDIR= alias \ apply \ asa \ awk \ banner \ basename \ brandelf \ bsdcat \ bsdiff \ bzip2 \ bzip2recover \ cap_mkdb \ chat \ chpass \ cksum \ cmp \ col \ colldef \ colrm \ column \ comm \ compress \ cpuset \ csplit \ ctlstat \ cut \ dirname \ du \ elf2aout \ elfdump \ enigma \ env \ expand \ false \ fetch \ find \ fmt \ fold \ fstat \ fsync \ gcore \ gencat \ getaddrinfo \ getconf \ getent \ getopt \ grep \ gzip \ head \ hexdump \ id \ ident \ ipcrm \ ipcs \ join \ jot \ keylogin \ keylogout \ killall \ ktrace \ ktrdump \ lam \ lastcomm \ ldd \ leave \ less \ lessecho \ lesskey \ limits \ locale \ localedef \ lock \ lockf \ logger \ login \ logins \ logname \ look \ lorder \ lsvfs \ lzmainfo \ m4 \ mandoc \ mesg \ minigzip \ ministat \ mkdep \ mkfifo \ mkimg \ mklocale \ mktemp \ mkuzip \ mt \ ncal \ netstat \ newgrp \ nfsstat \ nice \ nl \ numactl \ nohup \ opieinfo \ opiekey \ opiepasswd \ pagesize \ passwd \ paste \ patch \ pathchk \ perror \ pr \ printenv \ printf \ proccontrol \ procstat \ protect \ rctl \ renice \ resizewin \ rev \ revoke \ rpcinfo \ rs \ rup \ rusers \ rwall \ script \ sdiff \ sed \ send-pr \ seq \ shar \ showmount \ sockstat \ soelim \ sort \ split \ stat \ stdbuf \ strings \ su \ systat \ tabs \ tail \ tar \ tcopy \ tee \ time \ timeout \ tip \ top \ touch \ tput \ tr \ true \ truncate \ tset \ tsort \ tty \ uname \ unexpand \ uniq \ unzip \ units \ unvis \ uudecode \ uuencode \ vis \ vmstat \ w \ wall \ wc \ what \ whereis \ which \ whois \ write \ xargs \ xinstall \ xo \ xz \ xzdec \ yes # NB: keep these sorted by MK_* knobs SUBDIR.${MK_AT}+= at SUBDIR.${MK_ATM}+= atm SUBDIR.${MK_BLUETOOTH}+= bluetooth SUBDIR.${MK_BSD_CPIO}+= cpio SUBDIR.${MK_CALENDAR}+= calendar SUBDIR.${MK_CLANG}+= clang SUBDIR.${MK_DIALOG}+= dpv SUBDIR.${MK_EE}+= ee SUBDIR.${MK_FILE}+= file SUBDIR.${MK_FINGER}+= finger SUBDIR.${MK_FTP}+= ftp SUBDIR.${MK_GAMES}+= caesar SUBDIR.${MK_GAMES}+= factor SUBDIR.${MK_GAMES}+= fortune SUBDIR.${MK_GAMES}+= grdc SUBDIR.${MK_GAMES}+= morse SUBDIR.${MK_GAMES}+= number SUBDIR.${MK_GAMES}+= pom SUBDIR.${MK_GAMES}+= primes SUBDIR.${MK_GAMES}+= random .if ${MK_GPL_DTC} != "yes" .if ${COMPILER_FEATURES:Mc++11} SUBDIR+= dtc .endif .endif SUBDIR.${MK_GROFF}+= vgrind SUBDIR.${MK_HESIOD}+= hesinfo SUBDIR.${MK_ICONV}+= iconv SUBDIR.${MK_ICONV}+= mkcsmapper SUBDIR.${MK_ICONV}+= mkesdb SUBDIR.${MK_ISCSI}+= iscsictl SUBDIR.${MK_KDUMP}+= kdump SUBDIR.${MK_KDUMP}+= truss SUBDIR.${MK_KERBEROS_SUPPORT}+= compile_et SUBDIR.${MK_LDNS_UTILS}+= drill SUBDIR.${MK_LDNS_UTILS}+= host SUBDIR.${MK_LOCATE}+= locate # XXX msgs? SUBDIR.${MK_MAIL}+= biff SUBDIR.${MK_MAIL}+= from SUBDIR.${MK_MAIL}+= mail SUBDIR.${MK_MAIL}+= msgs SUBDIR.${MK_MAKE}+= bmake SUBDIR.${MK_MAN_UTILS}+= catman .if ${MK_MANDOCDB} == "no" # AND SUBDIR.${MK_MAN_UTILS}+= makewhatis .endif SUBDIR.${MK_MAN_UTILS}+= man SUBDIR.${MK_NETCAT}+= nc SUBDIR.${MK_NIS}+= ypcat SUBDIR.${MK_NIS}+= ypmatch SUBDIR.${MK_NIS}+= ypwhich SUBDIR.${MK_OPENSSH}+= ssh-copy-id SUBDIR.${MK_OPENSSL}+= bc SUBDIR.${MK_OPENSSL}+= chkey SUBDIR.${MK_OPENSSL}+= dc SUBDIR.${MK_OPENSSL}+= newkey SUBDIR.${MK_QUOTAS}+= quota SUBDIR.${MK_RCMDS}+= rlogin SUBDIR.${MK_RCMDS}+= rsh SUBDIR.${MK_RCMDS}+= ruptime SUBDIR.${MK_RCMDS}+= rwho SUBDIR.${MK_SENDMAIL}+= vacation SUBDIR.${MK_TALK}+= talk SUBDIR.${MK_TELNET}+= telnet SUBDIR.${MK_TESTS}+= tests SUBDIR.${MK_TEXTPROC}+= checknr SUBDIR.${MK_TEXTPROC}+= colcrt SUBDIR.${MK_TEXTPROC}+= ul SUBDIR.${MK_TFTP}+= tftp SUBDIR.${MK_TOOLCHAIN}+= addr2line SUBDIR.${MK_TOOLCHAIN}+= ar SUBDIR.${MK_TOOLCHAIN}+= c89 SUBDIR.${MK_TOOLCHAIN}+= c99 SUBDIR.${MK_TOOLCHAIN}+= ctags SUBDIR.${MK_TOOLCHAIN}+= cxxfilt SUBDIR.${MK_TOOLCHAIN}+= elfcopy SUBDIR.${MK_TOOLCHAIN}+= file2c # ARM64TODO gprof does not build # RISCVTODO gprof does not build .if ${MACHINE_ARCH} != "aarch64" && ${MACHINE_CPUARCH} != "riscv" SUBDIR.${MK_TOOLCHAIN}+= gprof .endif SUBDIR.${MK_TOOLCHAIN}+= indent SUBDIR.${MK_TOOLCHAIN}+= lex SUBDIR.${MK_TOOLCHAIN}+= mkstr SUBDIR.${MK_TOOLCHAIN}+= nm SUBDIR.${MK_TOOLCHAIN}+= readelf SUBDIR.${MK_TOOLCHAIN}+= rpcgen SUBDIR.${MK_TOOLCHAIN}+= unifdef SUBDIR.${MK_TOOLCHAIN}+= size -.if ${MACHINE_ARCH} != "aarch64" # ARM64TODO xlint does not build +.if ${MK_LINT} != "no" && ${MACHINE_ARCH} != "aarch64" # ARM64TODO xlint does not build SUBDIR.${MK_TOOLCHAIN}+= xlint .endif SUBDIR.${MK_TOOLCHAIN}+= xstr SUBDIR.${MK_TOOLCHAIN}+= yacc SUBDIR.${MK_VI}+= vi SUBDIR.${MK_VT}+= vtfontcvt SUBDIR.${MK_USB}+= usbhidaction SUBDIR.${MK_USB}+= usbhidctl SUBDIR.${MK_UTMPX}+= last .if ${MACHINE_CPUARCH} != "riscv" # RISCVTODO users does not build SUBDIR.${MK_UTMPX}+= users .endif SUBDIR.${MK_UTMPX}+= who SUBDIR.${MK_SVN}+= svn SUBDIR.${MK_SVNLITE}+= svn # These are normally only handled for build-tools. .if make(clean*) SUBDIR+= mkcsmapper_static SUBDIR+= mkesdb_static .endif .include SUBDIR_PARALLEL= .include