Index: stable/11/lib/libc/gen/sysctl.3 =================================================================== --- stable/11/lib/libc/gen/sysctl.3 (revision 325821) +++ stable/11/lib/libc/gen/sysctl.3 (revision 325822) @@ -1,862 +1,866 @@ .\" Copyright (c) 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 4. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)sysctl.3 8.4 (Berkeley) 5/9/95 .\" $FreeBSD$ .\" -.Dd September 10, 2015 +.Dd October 22, 2017 .Dt SYSCTL 3 .Os .Sh NAME .Nm sysctl , .Nm sysctlbyname , .Nm sysctlnametomib .Nd get or set system information .Sh LIBRARY .Lb libc .Sh SYNOPSIS .In sys/types.h .In sys/sysctl.h .Ft int .Fn sysctl "const int *name" "u_int namelen" "void *oldp" "size_t *oldlenp" "const void *newp" "size_t newlen" .Ft int .Fn sysctlbyname "const char *name" "void *oldp" "size_t *oldlenp" "const void *newp" "size_t newlen" .Ft int .Fn sysctlnametomib "const char *name" "int *mibp" "size_t *sizep" .Sh DESCRIPTION The .Fn sysctl function retrieves system information and allows processes with appropriate privileges to set system information. The information available from .Fn sysctl consists of integers, strings, and tables. Information may be retrieved and set from the command interface using the .Xr sysctl 8 utility. .Pp Unless explicitly noted below, .Fn sysctl returns a consistent snapshot of the data requested. Consistency is obtained by locking the destination buffer into memory so that the data may be copied out without blocking. Calls to .Fn sysctl are serialized to avoid deadlock. .Pp The state is described using a ``Management Information Base'' (MIB) style name, listed in .Fa name , which is a .Fa namelen length array of integers. .Pp The .Fn sysctlbyname function accepts an ASCII representation of the name and internally looks up the integer name vector. Apart from that, it behaves the same as the standard .Fn sysctl function. .Pp The information is copied into the buffer specified by .Fa oldp . The size of the buffer is given by the location specified by .Fa oldlenp before the call, and that location gives the amount of data copied after a successful call and after a call that returns with the error code .Er ENOMEM . If the amount of data available is greater than the size of the buffer supplied, the call supplies as much data as fits in the buffer provided and returns with the error code .Er ENOMEM . If the old value is not desired, .Fa oldp and .Fa oldlenp should be set to NULL. .Pp The size of the available data can be determined by calling .Fn sysctl with the .Dv NULL argument for .Fa oldp . The size of the available data will be returned in the location pointed to by .Fa oldlenp . For some operations, the amount of space may change often. For these operations, the system attempts to round up so that the returned size is large enough for a call to return the data shortly thereafter. .Pp To set a new value, .Fa newp is set to point to a buffer of length .Fa newlen from which the requested value is to be taken. If a new value is not to be set, .Fa newp should be set to NULL and .Fa newlen set to 0. .Pp The .Fn sysctlnametomib function accepts an ASCII representation of the name, looks up the integer name vector, and returns the numeric representation in the mib array pointed to by .Fa mibp . The number of elements in the mib array is given by the location specified by .Fa sizep before the call, and that location gives the number of entries copied after a successful call. The resulting .Fa mib and .Fa size may be used in subsequent .Fn sysctl calls to get the data associated with the requested ASCII name. This interface is intended for use by applications that want to repeatedly request the same variable (the .Fn sysctl function runs in about a third the time as the same request made via the .Fn sysctlbyname function). The .Fn sysctlnametomib function is also useful for fetching mib prefixes and then adding a final component. For example, to fetch process information for processes with pid's less than 100: .Pp .Bd -literal -offset indent -compact int i, mib[4]; size_t len; struct kinfo_proc kp; /* Fill out the first three components of the mib */ len = 4; sysctlnametomib("kern.proc.pid", mib, &len); /* Fetch and print entries for pid's < 100 */ for (i = 0; i < 100; i++) { mib[3] = i; len = sizeof(kp); if (sysctl(mib, 4, &kp, &len, NULL, 0) == -1) perror("sysctl"); else if (len > 0) printkproc(&kp); } .Ed .Pp The top level names are defined with a CTL_ prefix in .In sys/sysctl.h , and are as follows. The next and subsequent levels down are found in the include files listed here, and described in separate sections below. .Bl -column CTLXMACHDEPXXX "Next Level NamesXXXXXX" -offset indent .It Sy Name Ta Sy Next Level Names Ta Sy Description .It Dv CTL_DEBUG Ta In sys/sysctl.h Ta Debugging .It Dv CTL_VFS Ta In sys/mount.h Ta File system .It Dv CTL_HW Ta In sys/sysctl.h Ta Generic CPU, I/O .It Dv CTL_KERN Ta In sys/sysctl.h Ta High kernel limits .It Dv CTL_MACHDEP Ta In sys/sysctl.h Ta Machine dependent .It Dv CTL_NET Ta In sys/socket.h Ta Networking .It Dv CTL_USER Ta In sys/sysctl.h Ta User-level .It Dv CTL_VM Ta In vm/vm_param.h Ta Virtual memory .El .Pp For example, the following retrieves the maximum number of processes allowed in the system: .Pp .Bd -literal -offset indent -compact int mib[2], maxproc; size_t len; mib[0] = CTL_KERN; mib[1] = KERN_MAXPROC; len = sizeof(maxproc); sysctl(mib, 2, &maxproc, &len, NULL, 0); .Ed .Pp To retrieve the standard search path for the system utilities: .Pp .Bd -literal -offset indent -compact int mib[2]; size_t len; char *p; mib[0] = CTL_USER; mib[1] = USER_CS_PATH; sysctl(mib, 2, NULL, &len, NULL, 0); p = malloc(len); sysctl(mib, 2, p, &len, NULL, 0); .Ed .Ss CTL_DEBUG The debugging variables vary from system to system. A debugging variable may be added or deleted without need to recompile .Fn sysctl to know about it. Each time it runs, .Fn sysctl gets the list of debugging variables from the kernel and displays their current values. The system defines twenty .Pq Vt "struct ctldebug" variables named .Va debug0 through .Va debug19 . They are declared as separate variables so that they can be individually initialized at the location of their associated variable. The loader prevents multiple use of the same variable by issuing errors if a variable is initialized in more than one place. For example, to export the variable .Va dospecialcheck as a debugging variable, the following declaration would be used: .Pp .Bd -literal -offset indent -compact int dospecialcheck = 1; struct ctldebug debug5 = { "dospecialcheck", &dospecialcheck }; .Ed .Ss CTL_VFS A distinguished second level name, VFS_GENERIC, is used to get general information about all file systems. One of its third level identifiers is VFS_MAXTYPENUM that gives the highest valid file system type number. Its other third level identifier is VFS_CONF that returns configuration information about the file system type given as a fourth level identifier (see .Xr getvfsbyname 3 as an example of its use). The remaining second level identifiers are the file system type number returned by a .Xr statfs 2 call or from VFS_CONF. The third level identifiers available for each file system are given in the header file that defines the mount argument structure for that file system. .Ss CTL_HW The string and integer information available for the CTL_HW level is detailed below. The changeable column shows whether a process with appropriate privilege may change the value. .Bl -column "Second Level Name" integerXXX Changeable -offset indent .It Sy Second Level Name Ta Sy Type Ta Sy Changeable .It Dv HW_MACHINE Ta string Ta no .It Dv HW_MODEL Ta string Ta no .It Dv HW_NCPU Ta integer Ta no .It Dv HW_BYTEORDER Ta integer Ta no .It Dv HW_PHYSMEM Ta integer Ta no .It Dv HW_USERMEM Ta integer Ta no .It Dv HW_PAGESIZE Ta integer Ta no .\".It Dv HW_DISKNAMES Ta integer Ta no .\".It Dv HW_DISKSTATS Ta integer Ta no .It Dv HW_FLOATINGPT Ta integer Ta no .It Dv HW_MACHINE_ARCH Ta string Ta no .It Dv HW_REALMEM Ta integer Ta no .El .Bl -tag -width 6n .It Li HW_MACHINE The machine class. .It Li HW_MODEL The machine model .It Li HW_NCPU The number of cpus. .It Li HW_BYTEORDER The byteorder (4321 or 1234). .It Li HW_PHYSMEM The bytes of physical memory. .It Li HW_USERMEM The bytes of non-kernel memory. .It Li HW_PAGESIZE The software page size. .\".It Fa HW_DISKNAMES .\".It Fa HW_DISKSTATS .It Li HW_FLOATINGPT Nonzero if the floating point support is in hardware. .It Li HW_MACHINE_ARCH The machine dependent architecture type. .It Li HW_REALMEM The bytes of real memory. .El .Ss CTL_KERN The string and integer information available for the CTL_KERN level is detailed below. The changeable column shows whether a process with appropriate privilege may change the value. The types of data currently available are process information, system vnodes, the open file entries, routing table entries, virtual memory statistics, load average history, and clock rate information. .Bl -column "KERNXMAXFILESPERPROCXXX" "struct clockrateXXX" -offset indent .It Sy Second Level Name Ta Sy Type Ta Sy Changeable .It Dv KERN_ARGMAX Ta integer Ta no .It Dv KERN_BOOTFILE Ta string Ta yes .It Dv KERN_BOOTTIME Ta struct timeval Ta no .It Dv KERN_CLOCKRATE Ta struct clockinfo Ta no .It Dv KERN_FILE Ta struct xfile Ta no .It Dv KERN_HOSTID Ta integer Ta yes .It Dv KERN_HOSTUUID Ta string Ta yes .It Dv KERN_HOSTNAME Ta string Ta yes .It Dv KERN_JOB_CONTROL Ta integer Ta no .It Dv KERN_MAXFILES Ta integer Ta yes .It Dv KERN_MAXFILESPERPROC Ta integer Ta yes .It Dv KERN_MAXPROC Ta integer Ta no .It Dv KERN_MAXPROCPERUID Ta integer Ta yes .It Dv KERN_MAXVNODES Ta integer Ta yes .It Dv KERN_NGROUPS Ta integer Ta no .It Dv KERN_NISDOMAINNAME Ta string Ta yes .It Dv KERN_OSRELDATE Ta integer Ta no .It Dv KERN_OSRELEASE Ta string Ta no .It Dv KERN_OSREV Ta integer Ta no .It Dv KERN_OSTYPE Ta string Ta no .It Dv KERN_POSIX1 Ta integer Ta no .It Dv KERN_PROC Ta node Ta not applicable .It Dv KERN_PROF Ta node Ta not applicable .It Dv KERN_QUANTUM Ta integer Ta yes .It Dv KERN_SAVED_IDS Ta integer Ta no .It Dv KERN_SECURELVL Ta integer Ta raise only .It Dv KERN_UPDATEINTERVAL Ta integer Ta no .It Dv KERN_VERSION Ta string Ta no .It Dv KERN_VNODE Ta struct xvnode Ta no .El .Bl -tag -width 6n .It Li KERN_ARGMAX The maximum bytes of argument to .Xr execve 2 . .It Li KERN_BOOTFILE The full pathname of the file from which the kernel was loaded. .It Li KERN_BOOTTIME A .Va struct timeval structure is returned. This structure contains the time that the system was booted. .It Li KERN_CLOCKRATE A .Va struct clockinfo structure is returned. This structure contains the clock, statistics clock and profiling clock frequencies, the number of micro-seconds per hz tick and the skew rate. .It Li KERN_FILE Return the entire file table. The returned data consists of an array of .Va struct xfile , whose size depends on the current number of such objects in the system. .It Li KERN_HOSTID Get or set the host ID. .It Li KERN_HOSTUUID Get or set the host's universally unique identifier (UUID). .It Li KERN_HOSTNAME Get or set the hostname. .It Li KERN_JOB_CONTROL Return 1 if job control is available on this system, otherwise 0. .It Li KERN_MAXFILES The maximum number of files that may be open in the system. .It Li KERN_MAXFILESPERPROC The maximum number of files that may be open for a single process. This limit only applies to processes with an effective uid of nonzero at the time of the open request. Files that have already been opened are not affected if the limit or the effective uid is changed. .It Li KERN_MAXPROC The maximum number of concurrent processes the system will allow. .It Li KERN_MAXPROCPERUID The maximum number of concurrent processes the system will allow for a single effective uid. This limit only applies to processes with an effective uid of nonzero at the time of a fork request. Processes that have already been started are not affected if the limit is changed. .It Li KERN_MAXVNODES The maximum number of vnodes available on the system. .It Li KERN_NGROUPS The maximum number of supplemental groups. .It Li KERN_NISDOMAINNAME The name of the current YP/NIS domain. .It Li KERN_OSRELDATE The kernel release version in the format .Ar M Ns Ar mm Ns Ar R Ns Ar xx , where .Ar M is the major version, .Ar mm is the two digit minor version, .Ar R is 0 if release branch, otherwise 1, and .Ar xx is updated when the available APIs change. .Pp The userland release version is available from .In osreldate.h ; parse this file if you need to get the release version of the currently installed userland. .It Li KERN_OSRELEASE The system release string. .It Li KERN_OSREV The system revision string. .It Li KERN_OSTYPE The system type string. .It Li KERN_POSIX1 The version of .St -p1003.1 with which the system attempts to comply. .It Li KERN_PROC Return selected information about specific running processes. .Pp For the following names, an array of .Va struct kinfo_proc structures is returned, whose size depends on the current number of such objects in the system. .Bl -column "Third Level NameXXXXXX" "Fourth LevelXXXXXX" -offset indent .It Sy Third Level Name Ta Sy Fourth Level .It Dv KERN_PROC_ALL Ta None .It Dv KERN_PROC_PID Ta A process ID .It Dv KERN_PROC_PGRP Ta A process group .It Dv KERN_PROC_TTY Ta A tty device .It Dv KERN_PROC_UID Ta A user ID .It Dv KERN_PROC_RUID Ta A real user ID .El .Pp If the third level name is .Dv KERN_PROC_ARGS then the command line argument array is returned in a flattened form, i.e., zero-terminated arguments follow each other. The total size of array is returned. It is also possible for a process to set its own process title this way. If the third level name is .Dv KERN_PROC_PATHNAME , the path of the process' text file is stored. For .Dv KERN_PROC_PATHNAME , a process ID of .Li \-1 implies the current process. .Bl -column "Third Level NameXXXXXX" "Fourth LevelXXXXXX" -offset indent .It Sy Third Level Name Ta Sy Fourth Level .It Dv KERN_PROC_ARGS Ta "A process ID" .It Dv KERN_PROC_PATHNAME Ta "A process ID" .El .It Li KERN_PROF Return profiling information about the kernel. If the kernel is not compiled for profiling, attempts to retrieve any of the KERN_PROF values will fail with .Er ENOENT . The third level names for the string and integer profiling information is detailed below. The changeable column shows whether a process with appropriate privilege may change the value. .Bl -column "GPROFXGMONPARAMXXX" "struct gmonparamXXX" -offset indent .It Sy Third Level Name Ta Sy Type Ta Sy Changeable .It Dv GPROF_STATE Ta integer Ta yes .It Dv GPROF_COUNT Ta u_short[\|] Ta yes .It Dv GPROF_FROMS Ta u_short[\|] Ta yes .It Dv GPROF_TOS Ta struct tostruct Ta yes .It Dv GPROF_GMONPARAM Ta struct gmonparam Ta no .El .Pp The variables are as follows: .Bl -tag -width 6n .It Li GPROF_STATE Returns GMON_PROF_ON or GMON_PROF_OFF to show that profiling is running or stopped. .It Li GPROF_COUNT Array of statistical program counter counts. .It Li GPROF_FROMS Array indexed by program counter of call-from points. .It Li GPROF_TOS Array of .Va struct tostruct describing destination of calls and their counts. .It Li GPROF_GMONPARAM Structure giving the sizes of the above arrays. .El .It Li KERN_QUANTUM The maximum period of time, in microseconds, for which a process is allowed to run without being preempted if other processes are in the run queue. .It Li KERN_SAVED_IDS Returns 1 if saved set-group and saved set-user ID is available. .It Li KERN_SECURELVL The system security level. This level may be raised by processes with appropriate privilege. It may not be lowered. .It Li KERN_VERSION The system version string. .It Li KERN_VNODE Return the entire vnode table. Note, the vnode table is not necessarily a consistent snapshot of the system. The returned data consists of an array whose size depends on the current number of such objects in the system. Each element of the array consists of a .Va struct xvnode . .El .Ss CTL_NET The string and integer information available for the CTL_NET level is detailed below. The changeable column shows whether a process with appropriate privilege may change the value. .Bl -column "Second Level NameXXXXXX" "routing messagesXXX" -offset indent .It Sy Second Level Name Ta Sy Type Ta Sy Changeable .It Dv PF_ROUTE Ta routing messages Ta no .It Dv PF_INET Ta IPv4 values Ta yes .It Dv PF_INET6 Ta IPv6 values Ta yes .El .Bl -tag -width 6n .It Li PF_ROUTE Return the entire routing table or a subset of it. The data is returned as a sequence of routing messages (see .Xr route 4 for the header file, format and meaning). The length of each message is contained in the message header. .Pp The third level name is a protocol number, which is currently always 0. The fourth level name is an address family, which may be set to 0 to select all address families. The fifth, sixth, and seventh level names are as follows: .Bl -column -offset indent "Fifth Level" "Sixth Level" "Seventh Level" .It Sy Fifth level Ta Sy Sixth Level Ta Sy Seventh Level .It Dv NET_RT_FLAGS Ta rtflags Ta None .It Dv NET_RT_DUMP Ta None Ta None or fib number .It Dv NET_RT_IFLIST Ta 0 or if_index Ta None .It Dv NET_RT_IFMALIST Ta 0 or if_index Ta None .It Dv NET_RT_IFLISTL Ta 0 or if_index Ta None .El .Pp The .Dv NET_RT_IFMALIST name returns information about multicast group memberships on all interfaces if 0 is specified, or for the interface specified by .Va if_index . .Pp The .Dv NET_RT_IFLISTL is like .Dv NET_RT_IFLIST , just returning message header structs with additional fields allowing the interface to be extended without breaking binary compatibility. The .Dv NET_RT_IFLISTL uses 'l' versions of the message header structures: .Va struct if_msghdrl and .Va struct ifa_msghdrl . .It Li PF_INET Get or set various global information about the IPv4 (Internet Protocol version 4). The third level name is the protocol. The fourth level name is the variable name. The currently defined protocols and names are: .Bl -column ProtocolXX VariableXX TypeXX ChangeableXX .It Sy Protocol Ta Sy Variable Ta Sy Type Ta Sy Changeable .It icmp Ta bmcastecho Ta integer Ta yes .It icmp Ta maskrepl Ta integer Ta yes .It ip Ta forwarding Ta integer Ta yes .It ip Ta redirect Ta integer Ta yes .It ip Ta ttl Ta integer Ta yes .It udp Ta checksum Ta integer Ta yes .El .Pp The variables are as follows: .Bl -tag -width 6n .It Li icmp.bmcastecho Returns 1 if an ICMP echo request to a broadcast or multicast address is to be answered. .It Li icmp.maskrepl Returns 1 if ICMP network mask requests are to be answered. .It Li ip.forwarding Returns 1 when IP forwarding is enabled for the host, meaning that the host is acting as a router. .It Li ip.redirect Returns 1 when ICMP redirects may be sent by the host. This option is ignored unless the host is routing IP packets, and should normally be enabled on all systems. .It Li ip.ttl The maximum time-to-live (hop count) value for an IP packet sourced by the system. This value applies to normal transport protocols, not to ICMP. .It Li udp.checksum Returns 1 when UDP checksums are being computed and checked. Disabling UDP checksums is strongly discouraged. .Pp For variables net.inet.*.ipsec, please refer to .Xr ipsec 4 . .El .It Li PF_INET6 Get or set various global information about the IPv6 (Internet Protocol version 6). The third level name is the protocol. The fourth level name is the variable name. .Pp For variables net.inet6.* please refer to .Xr inet6 4 . For variables net.inet6.*.ipsec6, please refer to .Xr ipsec 4 . .El .Ss CTL_USER The string and integer information available for the CTL_USER level is detailed below. The changeable column shows whether a process with appropriate privilege may change the value. .Bl -column "USER_COLL_WEIGHTS_MAXXXX" "integerXXX" -offset indent .It Sy Second Level Name Ta Sy Type Ta Sy Changeable .It Dv USER_BC_BASE_MAX Ta integer Ta no .It Dv USER_BC_DIM_MAX Ta integer Ta no .It Dv USER_BC_SCALE_MAX Ta integer Ta no .It Dv USER_BC_STRING_MAX Ta integer Ta no .It Dv USER_COLL_WEIGHTS_MAX Ta integer Ta no .It Dv USER_CS_PATH Ta string Ta no .It Dv USER_EXPR_NEST_MAX Ta integer Ta no .It Dv USER_LINE_MAX Ta integer Ta no .It Dv USER_POSIX2_CHAR_TERM Ta integer Ta no .It Dv USER_POSIX2_C_BIND Ta integer Ta no .It Dv USER_POSIX2_C_DEV Ta integer Ta no .It Dv USER_POSIX2_FORT_DEV Ta integer Ta no .It Dv USER_POSIX2_FORT_RUN Ta integer Ta no .It Dv USER_POSIX2_LOCALEDEF Ta integer Ta no .It Dv USER_POSIX2_SW_DEV Ta integer Ta no .It Dv USER_POSIX2_UPE Ta integer Ta no .It Dv USER_POSIX2_VERSION Ta integer Ta no .It Dv USER_RE_DUP_MAX Ta integer Ta no .It Dv USER_STREAM_MAX Ta integer Ta no .It Dv USER_TZNAME_MAX Ta integer Ta no .El .Bl -tag -width 6n .It Li USER_BC_BASE_MAX The maximum ibase/obase values in the .Xr bc 1 utility. .It Li USER_BC_DIM_MAX The maximum array size in the .Xr bc 1 utility. .It Li USER_BC_SCALE_MAX The maximum scale value in the .Xr bc 1 utility. .It Li USER_BC_STRING_MAX The maximum string length in the .Xr bc 1 utility. .It Li USER_COLL_WEIGHTS_MAX The maximum number of weights that can be assigned to any entry of the LC_COLLATE order keyword in the locale definition file. .It Li USER_CS_PATH Return a value for the .Ev PATH environment variable that finds all the standard utilities. .It Li USER_EXPR_NEST_MAX The maximum number of expressions that can be nested within parenthesis by the .Xr expr 1 utility. .It Li USER_LINE_MAX The maximum length in bytes of a text-processing utility's input line. .It Li USER_POSIX2_CHAR_TERM Return 1 if the system supports at least one terminal type capable of all operations described in .St -p1003.2 , otherwise 0. .It Li USER_POSIX2_C_BIND Return 1 if the system's C-language development facilities support the C-Language Bindings Option, otherwise 0. .It Li USER_POSIX2_C_DEV Return 1 if the system supports the C-Language Development Utilities Option, otherwise 0. .It Li USER_POSIX2_FORT_DEV Return 1 if the system supports the FORTRAN Development Utilities Option, otherwise 0. .It Li USER_POSIX2_FORT_RUN Return 1 if the system supports the FORTRAN Runtime Utilities Option, otherwise 0. .It Li USER_POSIX2_LOCALEDEF Return 1 if the system supports the creation of locales, otherwise 0. .It Li USER_POSIX2_SW_DEV Return 1 if the system supports the Software Development Utilities Option, otherwise 0. .It Li USER_POSIX2_UPE Return 1 if the system supports the User Portability Utilities Option, otherwise 0. .It Li USER_POSIX2_VERSION The version of .St -p1003.2 with which the system attempts to comply. .It Li USER_RE_DUP_MAX The maximum number of repeated occurrences of a regular expression permitted when using interval notation. .It Li USER_STREAM_MAX The minimum maximum number of streams that a process may have open at any one time. .It Li USER_TZNAME_MAX The minimum maximum number of types supported for the name of a timezone. .El .Ss CTL_VM The string and integer information available for the CTL_VM level is detailed below. The changeable column shows whether a process with appropriate privilege may change the value. .Bl -column "Second Level NameXXXXXX" "struct loadavgXXX" -offset indent .It Sy Second Level Name Ta Sy Type Ta Sy Changeable .It Dv VM_LOADAVG Ta struct loadavg Ta no .It Dv VM_TOTAL Ta struct vmtotal Ta no .It Dv VM_SWAPPING_ENABLED Ta integer Ta maybe .It Dv VM_V_FREE_MIN Ta integer Ta yes .It Dv VM_V_FREE_RESERVED Ta integer Ta yes .It Dv VM_V_FREE_TARGET Ta integer Ta yes .It Dv VM_V_INACTIVE_TARGET Ta integer Ta yes .It Dv VM_V_PAGEOUT_FREE_MIN Ta integer Ta yes +.It Dv VM_OVERCOMMIT Ta integer Ta yes .El .Bl -tag -width 6n .It Li VM_LOADAVG Return the load average history. The returned data consists of a .Va struct loadavg . .It Li VM_TOTAL Return the system wide virtual memory statistics. The returned data consists of a .Va struct vmtotal . .It Li VM_SWAPPING_ENABLED 1 if process swapping is enabled or 0 if disabled. This variable is permanently set to 0 if the kernel was built with swapping disabled. .It Li VM_V_FREE_MIN Minimum amount of memory (cache memory plus free memory) required to be available before a process waiting on memory will be awakened. .It Li VM_V_FREE_RESERVED Processes will awaken the pageout daemon and wait for memory if the number of free and cached pages drops below this value. .It Li VM_V_FREE_TARGET The total amount of free memory (including cache memory) that the pageout daemon tries to maintain. .It Li VM_V_INACTIVE_TARGET The desired number of inactive pages that the pageout daemon should achieve when it runs. Inactive pages can be quickly inserted into process address space when needed. .It Li VM_V_PAGEOUT_FREE_MIN If the amount of free and cache memory falls below this value, the pageout daemon will enter "memory conserving mode" to avoid deadlock. +.It Li VM_OVERCOMMIT +Overcommit behaviour, as described in +.Xr tuning 7 . .El .Sh RETURN VALUES .Rv -std .Sh FILES .Bl -tag -width -compact .It In sys/sysctl.h definitions for top level identifiers, second level kernel and hardware identifiers, and user level identifiers .It In sys/socket.h definitions for second level network identifiers .It In sys/gmon.h definitions for third level profiling identifiers .It In vm/vm_param.h definitions for second level virtual memory identifiers .It In netinet/in.h definitions for third level IPv4/IPv6 identifiers and fourth level IPv4/v6 identifiers .It In netinet/icmp_var.h definitions for fourth level ICMP identifiers .It In netinet/icmp6.h definitions for fourth level ICMPv6 identifiers .It In netinet/udp_var.h definitions for fourth level UDP identifiers .El .Sh ERRORS The following errors may be reported: .Bl -tag -width Er .It Bq Er EFAULT The buffer .Fa name , .Fa oldp , .Fa newp , or length pointer .Fa oldlenp contains an invalid address. .It Bq Er EINVAL The .Fa name array is less than two or greater than CTL_MAXNAME. .It Bq Er EINVAL A non-null .Fa newp is given and its specified length in .Fa newlen is too large or too small. .It Bq Er ENOMEM The length pointed to by .Fa oldlenp is too short to hold the requested value. .It Bq Er ENOMEM The smaller of either the length pointed to by .Fa oldlenp or the estimated size of the returned data exceeds the system limit on locked memory. .It Bq Er ENOMEM Locking the buffer .Fa oldp , or a portion of the buffer if the estimated size of the data to be returned is smaller, would cause the process to exceed its per-process locked memory limit. .It Bq Er ENOTDIR The .Fa name array specifies an intermediate rather than terminal name. .It Bq Er EISDIR The .Fa name array specifies a terminal name, but the actual name is not terminal. .It Bq Er ENOENT The .Fa name array specifies a value that is unknown. .It Bq Er EPERM An attempt is made to set a read-only value. .It Bq Er EPERM A process without appropriate privilege attempts to set a value. .El .Sh SEE ALSO .Xr confstr 3 , .Xr kvm 3 , .Xr sysconf 3 , .Xr sysctl 8 .Sh HISTORY The .Fn sysctl function first appeared in .Bx 4.4 . Index: stable/11/sys/vm/swap_pager.c =================================================================== --- stable/11/sys/vm/swap_pager.c (revision 325821) +++ stable/11/sys/vm/swap_pager.c (revision 325822) @@ -1,2828 +1,2828 @@ /*- * Copyright (c) 1998 Matthew Dillon, * Copyright (c) 1994 John S. Dyson * Copyright (c) 1990 University of Utah. * Copyright (c) 1982, 1986, 1989, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * New Swap System * Matthew Dillon * * Radix Bitmap 'blists'. * * - The new swapper uses the new radix bitmap code. This should scale * to arbitrarily small or arbitrarily large swap spaces and an almost * arbitrary degree of fragmentation. * * Features: * * - on the fly reallocation of swap during putpages. The new system * does not try to keep previously allocated swap blocks for dirty * pages. * * - on the fly deallocation of swap * * - No more garbage collection required. Unnecessarily allocated swap * blocks only exist for dirty vm_page_t's now and these are already * cycled (in a high-load system) by the pager. We also do on-the-fly * removal of invalidated swap blocks when a page is destroyed * or renamed. * * from: Utah $Hdr: swap_pager.c 1.4 91/04/30$ * * @(#)swap_pager.c 8.9 (Berkeley) 3/21/94 * @(#)vm_swap.c 8.5 (Berkeley) 2/17/94 */ #include __FBSDID("$FreeBSD$"); #include "opt_swap.h" #include "opt_vm.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * MAX_PAGEOUT_CLUSTER must be a power of 2 between 1 and 64. * The 64-page limit is due to the radix code (kern/subr_blist.c). */ #ifndef MAX_PAGEOUT_CLUSTER #define MAX_PAGEOUT_CLUSTER 32 #endif #if !defined(SWB_NPAGES) #define SWB_NPAGES MAX_PAGEOUT_CLUSTER #endif #define SWAP_META_PAGES PCTRIE_COUNT /* * A swblk structure maps each page index within a * SWAP_META_PAGES-aligned and sized range to the address of an * on-disk swap block (or SWAPBLK_NONE). The collection of these * mappings for an entire vm object is implemented as a pc-trie. */ struct swblk { vm_pindex_t p; daddr_t d[SWAP_META_PAGES]; }; static MALLOC_DEFINE(M_VMPGDATA, "vm_pgdata", "swap pager private data"); static struct mtx sw_dev_mtx; static TAILQ_HEAD(, swdevt) swtailq = TAILQ_HEAD_INITIALIZER(swtailq); static struct swdevt *swdevhd; /* Allocate from here next */ static int nswapdev; /* Number of swap devices */ int swap_pager_avail; static struct sx swdev_syscall_lock; /* serialize swap(on|off) */ static vm_ooffset_t swap_total; SYSCTL_QUAD(_vm, OID_AUTO, swap_total, CTLFLAG_RD, &swap_total, 0, "Total amount of available swap storage."); static vm_ooffset_t swap_reserved; SYSCTL_QUAD(_vm, OID_AUTO, swap_reserved, CTLFLAG_RD, &swap_reserved, 0, "Amount of swap storage needed to back all allocated anonymous memory."); static int overcommit = 0; -SYSCTL_INT(_vm, OID_AUTO, overcommit, CTLFLAG_RW, &overcommit, 0, +SYSCTL_INT(_vm, VM_OVERCOMMIT, overcommit, CTLFLAG_RW, &overcommit, 0, "Configure virtual memory overcommit behavior. See tuning(7) " "for details."); static unsigned long swzone; SYSCTL_ULONG(_vm, OID_AUTO, swzone, CTLFLAG_RD, &swzone, 0, "Actual size of swap metadata zone"); static unsigned long swap_maxpages; SYSCTL_ULONG(_vm, OID_AUTO, swap_maxpages, CTLFLAG_RD, &swap_maxpages, 0, "Maximum amount of swap supported"); /* bits from overcommit */ #define SWAP_RESERVE_FORCE_ON (1 << 0) #define SWAP_RESERVE_RLIMIT_ON (1 << 1) #define SWAP_RESERVE_ALLOW_NONWIRED (1 << 2) int swap_reserve(vm_ooffset_t incr) { return (swap_reserve_by_cred(incr, curthread->td_ucred)); } int swap_reserve_by_cred(vm_ooffset_t incr, struct ucred *cred) { vm_ooffset_t r, s; int res, error; static int curfail; static struct timeval lastfail; struct uidinfo *uip; uip = cred->cr_ruidinfo; if (incr & PAGE_MASK) panic("swap_reserve: & PAGE_MASK"); #ifdef RACCT if (racct_enable) { PROC_LOCK(curproc); error = racct_add(curproc, RACCT_SWAP, incr); PROC_UNLOCK(curproc); if (error != 0) return (0); } #endif res = 0; mtx_lock(&sw_dev_mtx); r = swap_reserved + incr; if (overcommit & SWAP_RESERVE_ALLOW_NONWIRED) { s = vm_cnt.v_page_count - vm_cnt.v_free_reserved - vm_cnt.v_wire_count; s *= PAGE_SIZE; } else s = 0; s += swap_total; if ((overcommit & SWAP_RESERVE_FORCE_ON) == 0 || r <= s || (error = priv_check(curthread, PRIV_VM_SWAP_NOQUOTA)) == 0) { res = 1; swap_reserved = r; } mtx_unlock(&sw_dev_mtx); if (res) { UIDINFO_VMSIZE_LOCK(uip); if ((overcommit & SWAP_RESERVE_RLIMIT_ON) != 0 && uip->ui_vmsize + incr > lim_cur(curthread, RLIMIT_SWAP) && priv_check(curthread, PRIV_VM_SWAP_NORLIMIT)) res = 0; else uip->ui_vmsize += incr; UIDINFO_VMSIZE_UNLOCK(uip); if (!res) { mtx_lock(&sw_dev_mtx); swap_reserved -= incr; mtx_unlock(&sw_dev_mtx); } } if (!res && ppsratecheck(&lastfail, &curfail, 1)) { printf("uid %d, pid %d: swap reservation for %jd bytes failed\n", uip->ui_uid, curproc->p_pid, incr); } #ifdef RACCT if (!res) { PROC_LOCK(curproc); racct_sub(curproc, RACCT_SWAP, incr); PROC_UNLOCK(curproc); } #endif return (res); } void swap_reserve_force(vm_ooffset_t incr) { struct uidinfo *uip; mtx_lock(&sw_dev_mtx); swap_reserved += incr; mtx_unlock(&sw_dev_mtx); #ifdef RACCT PROC_LOCK(curproc); racct_add_force(curproc, RACCT_SWAP, incr); PROC_UNLOCK(curproc); #endif uip = curthread->td_ucred->cr_ruidinfo; PROC_LOCK(curproc); UIDINFO_VMSIZE_LOCK(uip); uip->ui_vmsize += incr; UIDINFO_VMSIZE_UNLOCK(uip); PROC_UNLOCK(curproc); } void swap_release(vm_ooffset_t decr) { struct ucred *cred; PROC_LOCK(curproc); cred = curthread->td_ucred; swap_release_by_cred(decr, cred); PROC_UNLOCK(curproc); } void swap_release_by_cred(vm_ooffset_t decr, struct ucred *cred) { struct uidinfo *uip; uip = cred->cr_ruidinfo; if (decr & PAGE_MASK) panic("swap_release: & PAGE_MASK"); mtx_lock(&sw_dev_mtx); if (swap_reserved < decr) panic("swap_reserved < decr"); swap_reserved -= decr; mtx_unlock(&sw_dev_mtx); UIDINFO_VMSIZE_LOCK(uip); if (uip->ui_vmsize < decr) printf("negative vmsize for uid = %d\n", uip->ui_uid); uip->ui_vmsize -= decr; UIDINFO_VMSIZE_UNLOCK(uip); racct_sub_cred(cred, RACCT_SWAP, decr); } #define SWM_FREE 0x02 /* free, period */ #define SWM_POP 0x04 /* pop out */ static int swap_pager_full = 2; /* swap space exhaustion (task killing) */ static int swap_pager_almost_full = 1; /* swap space exhaustion (w/hysteresis)*/ static int nsw_rcount; /* free read buffers */ static int nsw_wcount_sync; /* limit write buffers / synchronous */ static int nsw_wcount_async; /* limit write buffers / asynchronous */ static int nsw_wcount_async_max;/* assigned maximum */ static int nsw_cluster_max; /* maximum VOP I/O allowed */ static int sysctl_swap_async_max(SYSCTL_HANDLER_ARGS); SYSCTL_PROC(_vm, OID_AUTO, swap_async_max, CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, NULL, 0, sysctl_swap_async_max, "I", "Maximum running async swap ops"); static int sysctl_swap_fragmentation(SYSCTL_HANDLER_ARGS); SYSCTL_PROC(_vm, OID_AUTO, swap_fragmentation, CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, 0, sysctl_swap_fragmentation, "A", "Swap Fragmentation Info"); static struct sx sw_alloc_sx; /* * "named" and "unnamed" anon region objects. Try to reduce the overhead * of searching a named list by hashing it just a little. */ #define NOBJLISTS 8 #define NOBJLIST(handle) \ (&swap_pager_object_list[((int)(intptr_t)handle >> 4) & (NOBJLISTS-1)]) static struct pagerlst swap_pager_object_list[NOBJLISTS]; static uma_zone_t swblk_zone; static uma_zone_t swpctrie_zone; /* * pagerops for OBJT_SWAP - "swap pager". Some ops are also global procedure * calls hooked from other parts of the VM system and do not appear here. * (see vm/swap_pager.h). */ static vm_object_t swap_pager_alloc(void *handle, vm_ooffset_t size, vm_prot_t prot, vm_ooffset_t offset, struct ucred *); static void swap_pager_dealloc(vm_object_t object); static int swap_pager_getpages(vm_object_t, vm_page_t *, int, int *, int *); static int swap_pager_getpages_async(vm_object_t, vm_page_t *, int, int *, int *, pgo_getpages_iodone_t, void *); static void swap_pager_putpages(vm_object_t, vm_page_t *, int, boolean_t, int *); static boolean_t swap_pager_haspage(vm_object_t object, vm_pindex_t pindex, int *before, int *after); static void swap_pager_init(void); static void swap_pager_unswapped(vm_page_t); static void swap_pager_swapoff(struct swdevt *sp); struct pagerops swappagerops = { .pgo_init = swap_pager_init, /* early system initialization of pager */ .pgo_alloc = swap_pager_alloc, /* allocate an OBJT_SWAP object */ .pgo_dealloc = swap_pager_dealloc, /* deallocate an OBJT_SWAP object */ .pgo_getpages = swap_pager_getpages, /* pagein */ .pgo_getpages_async = swap_pager_getpages_async, /* pagein (async) */ .pgo_putpages = swap_pager_putpages, /* pageout */ .pgo_haspage = swap_pager_haspage, /* get backing store status for page */ .pgo_pageunswapped = swap_pager_unswapped, /* remove swap related to page */ }; /* * swap_*() routines are externally accessible. swp_*() routines are * internal. */ static int nswap_lowat = 128; /* in pages, swap_pager_almost_full warn */ static int nswap_hiwat = 512; /* in pages, swap_pager_almost_full warn */ SYSCTL_INT(_vm, OID_AUTO, dmmax, CTLFLAG_RD, &nsw_cluster_max, 0, "Maximum size of a swap block in pages"); static void swp_sizecheck(void); static void swp_pager_async_iodone(struct buf *bp); static int swapongeom(struct vnode *); static int swaponvp(struct thread *, struct vnode *, u_long); static int swapoff_one(struct swdevt *sp, struct ucred *cred); /* * Swap bitmap functions */ static void swp_pager_freeswapspace(daddr_t blk, int npages); static daddr_t swp_pager_getswapspace(int npages); /* * Metadata functions */ static void swp_pager_meta_build(vm_object_t, vm_pindex_t, daddr_t); static void swp_pager_meta_free(vm_object_t, vm_pindex_t, vm_pindex_t); static void swp_pager_meta_free_all(vm_object_t); static daddr_t swp_pager_meta_ctl(vm_object_t, vm_pindex_t, int); static void * swblk_trie_alloc(struct pctrie *ptree) { return (uma_zalloc(swpctrie_zone, M_NOWAIT | (curproc == pageproc ? M_USE_RESERVE : 0))); } static void swblk_trie_free(struct pctrie *ptree, void *node) { uma_zfree(swpctrie_zone, node); } PCTRIE_DEFINE(SWAP, swblk, p, swblk_trie_alloc, swblk_trie_free); /* * SWP_SIZECHECK() - update swap_pager_full indication * * update the swap_pager_almost_full indication and warn when we are * about to run out of swap space, using lowat/hiwat hysteresis. * * Clear swap_pager_full ( task killing ) indication when lowat is met. * * No restrictions on call * This routine may not block. */ static void swp_sizecheck(void) { if (swap_pager_avail < nswap_lowat) { if (swap_pager_almost_full == 0) { printf("swap_pager: out of swap space\n"); swap_pager_almost_full = 1; } } else { swap_pager_full = 0; if (swap_pager_avail > nswap_hiwat) swap_pager_almost_full = 0; } } /* * SWAP_PAGER_INIT() - initialize the swap pager! * * Expected to be started from system init. NOTE: This code is run * before much else so be careful what you depend on. Most of the VM * system has yet to be initialized at this point. */ static void swap_pager_init(void) { /* * Initialize object lists */ int i; for (i = 0; i < NOBJLISTS; ++i) TAILQ_INIT(&swap_pager_object_list[i]); mtx_init(&sw_dev_mtx, "swapdev", NULL, MTX_DEF); sx_init(&sw_alloc_sx, "swspsx"); sx_init(&swdev_syscall_lock, "swsysc"); } /* * SWAP_PAGER_SWAP_INIT() - swap pager initialization from pageout process * * Expected to be started from pageout process once, prior to entering * its main loop. */ void swap_pager_swap_init(void) { unsigned long n, n2; /* * Number of in-transit swap bp operations. Don't * exhaust the pbufs completely. Make sure we * initialize workable values (0 will work for hysteresis * but it isn't very efficient). * * The nsw_cluster_max is constrained by the bp->b_pages[] * array (MAXPHYS/PAGE_SIZE) and our locally defined * MAX_PAGEOUT_CLUSTER. Also be aware that swap ops are * constrained by the swap device interleave stripe size. * * Currently we hardwire nsw_wcount_async to 4. This limit is * designed to prevent other I/O from having high latencies due to * our pageout I/O. The value 4 works well for one or two active swap * devices but is probably a little low if you have more. Even so, * a higher value would probably generate only a limited improvement * with three or four active swap devices since the system does not * typically have to pageout at extreme bandwidths. We will want * at least 2 per swap devices, and 4 is a pretty good value if you * have one NFS swap device due to the command/ack latency over NFS. * So it all works out pretty well. */ nsw_cluster_max = min((MAXPHYS/PAGE_SIZE), MAX_PAGEOUT_CLUSTER); mtx_lock(&pbuf_mtx); nsw_rcount = (nswbuf + 1) / 2; nsw_wcount_sync = (nswbuf + 3) / 4; nsw_wcount_async = 4; nsw_wcount_async_max = nsw_wcount_async; mtx_unlock(&pbuf_mtx); /* * Initialize our zone, guessing on the number we need based * on the number of pages in the system. */ n = vm_cnt.v_page_count / 2; if (maxswzone && n > maxswzone / sizeof(struct swblk)) n = maxswzone / sizeof(struct swblk); swpctrie_zone = uma_zcreate("swpctrie", pctrie_node_size(), NULL, NULL, pctrie_zone_init, NULL, UMA_ALIGN_PTR, UMA_ZONE_NOFREE | UMA_ZONE_VM); if (swpctrie_zone == NULL) panic("failed to create swap pctrie zone."); swblk_zone = uma_zcreate("swblk", sizeof(struct swblk), NULL, NULL, NULL, NULL, _Alignof(struct swblk) - 1, UMA_ZONE_NOFREE | UMA_ZONE_VM); if (swblk_zone == NULL) panic("failed to create swap blk zone."); n2 = n; do { if (uma_zone_reserve_kva(swblk_zone, n)) break; /* * if the allocation failed, try a zone two thirds the * size of the previous attempt. */ n -= ((n + 2) / 3); } while (n > 0); /* * Often uma_zone_reserve_kva() cannot reserve exactly the * requested size. Account for the difference when * calculating swap_maxpages. */ n = uma_zone_get_max(swblk_zone); if (n < n2) printf("Swap blk zone entries reduced from %lu to %lu.\n", n2, n); swap_maxpages = n * SWAP_META_PAGES; swzone = n * sizeof(struct swblk); if (!uma_zone_reserve_kva(swpctrie_zone, n)) printf("Cannot reserve swap pctrie zone, " "reduce kern.maxswzone.\n"); } static vm_object_t swap_pager_alloc_init(void *handle, struct ucred *cred, vm_ooffset_t size, vm_ooffset_t offset) { vm_object_t object; if (cred != NULL) { if (!swap_reserve_by_cred(size, cred)) return (NULL); crhold(cred); } /* * The un_pager.swp.swp_blks trie is initialized by * vm_object_allocate() to ensure the correct order of * visibility to other threads. */ object = vm_object_allocate(OBJT_SWAP, OFF_TO_IDX(offset + PAGE_MASK + size)); object->handle = handle; if (cred != NULL) { object->cred = cred; object->charge = size; } return (object); } /* * SWAP_PAGER_ALLOC() - allocate a new OBJT_SWAP VM object and instantiate * its metadata structures. * * This routine is called from the mmap and fork code to create a new * OBJT_SWAP object. * * This routine must ensure that no live duplicate is created for * the named object request, which is protected against by * holding the sw_alloc_sx lock in case handle != NULL. */ static vm_object_t swap_pager_alloc(void *handle, vm_ooffset_t size, vm_prot_t prot, vm_ooffset_t offset, struct ucred *cred) { vm_object_t object; if (handle != NULL) { /* * Reference existing named region or allocate new one. There * should not be a race here against swp_pager_meta_build() * as called from vm_page_remove() in regards to the lookup * of the handle. */ sx_xlock(&sw_alloc_sx); object = vm_pager_object_lookup(NOBJLIST(handle), handle); if (object == NULL) { object = swap_pager_alloc_init(handle, cred, size, offset); if (object != NULL) { TAILQ_INSERT_TAIL(NOBJLIST(object->handle), object, pager_object_list); } } sx_xunlock(&sw_alloc_sx); } else { object = swap_pager_alloc_init(handle, cred, size, offset); } return (object); } /* * SWAP_PAGER_DEALLOC() - remove swap metadata from object * * The swap backing for the object is destroyed. The code is * designed such that we can reinstantiate it later, but this * routine is typically called only when the entire object is * about to be destroyed. * * The object must be locked. */ static void swap_pager_dealloc(vm_object_t object) { VM_OBJECT_ASSERT_WLOCKED(object); KASSERT((object->flags & OBJ_DEAD) != 0, ("dealloc of reachable obj")); /* * Remove from list right away so lookups will fail if we block for * pageout completion. */ if (object->handle != NULL) { VM_OBJECT_WUNLOCK(object); sx_xlock(&sw_alloc_sx); TAILQ_REMOVE(NOBJLIST(object->handle), object, pager_object_list); sx_xunlock(&sw_alloc_sx); VM_OBJECT_WLOCK(object); } vm_object_pip_wait(object, "swpdea"); /* * Free all remaining metadata. We only bother to free it from * the swap meta data. We do not attempt to free swapblk's still * associated with vm_page_t's for this object. We do not care * if paging is still in progress on some objects. */ swp_pager_meta_free_all(object); object->handle = NULL; object->type = OBJT_DEAD; } /************************************************************************ * SWAP PAGER BITMAP ROUTINES * ************************************************************************/ /* * SWP_PAGER_GETSWAPSPACE() - allocate raw swap space * * Allocate swap for the requested number of pages. The starting * swap block number (a page index) is returned or SWAPBLK_NONE * if the allocation failed. * * Also has the side effect of advising that somebody made a mistake * when they configured swap and didn't configure enough. * * This routine may not sleep. * * We allocate in round-robin fashion from the configured devices. */ static daddr_t swp_pager_getswapspace(int npages) { daddr_t blk; struct swdevt *sp; int i; blk = SWAPBLK_NONE; mtx_lock(&sw_dev_mtx); sp = swdevhd; for (i = 0; i < nswapdev; i++) { if (sp == NULL) sp = TAILQ_FIRST(&swtailq); if (!(sp->sw_flags & SW_CLOSING)) { blk = blist_alloc(sp->sw_blist, npages); if (blk != SWAPBLK_NONE) { blk += sp->sw_first; sp->sw_used += npages; swap_pager_avail -= npages; swp_sizecheck(); swdevhd = TAILQ_NEXT(sp, sw_list); goto done; } } sp = TAILQ_NEXT(sp, sw_list); } if (swap_pager_full != 2) { printf("swap_pager_getswapspace(%d): failed\n", npages); swap_pager_full = 2; swap_pager_almost_full = 1; } swdevhd = NULL; done: mtx_unlock(&sw_dev_mtx); return (blk); } static int swp_pager_isondev(daddr_t blk, struct swdevt *sp) { return (blk >= sp->sw_first && blk < sp->sw_end); } static void swp_pager_strategy(struct buf *bp) { struct swdevt *sp; mtx_lock(&sw_dev_mtx); TAILQ_FOREACH(sp, &swtailq, sw_list) { if (bp->b_blkno >= sp->sw_first && bp->b_blkno < sp->sw_end) { mtx_unlock(&sw_dev_mtx); if ((sp->sw_flags & SW_UNMAPPED) != 0 && unmapped_buf_allowed) { bp->b_data = unmapped_buf; bp->b_offset = 0; } else { pmap_qenter((vm_offset_t)bp->b_data, &bp->b_pages[0], bp->b_bcount / PAGE_SIZE); } sp->sw_strategy(bp, sp); return; } } panic("Swapdev not found"); } /* * SWP_PAGER_FREESWAPSPACE() - free raw swap space * * This routine returns the specified swap blocks back to the bitmap. * * This routine may not sleep. */ static void swp_pager_freeswapspace(daddr_t blk, int npages) { struct swdevt *sp; mtx_lock(&sw_dev_mtx); TAILQ_FOREACH(sp, &swtailq, sw_list) { if (blk >= sp->sw_first && blk < sp->sw_end) { sp->sw_used -= npages; /* * If we are attempting to stop swapping on * this device, we don't want to mark any * blocks free lest they be reused. */ if ((sp->sw_flags & SW_CLOSING) == 0) { blist_free(sp->sw_blist, blk - sp->sw_first, npages); swap_pager_avail += npages; swp_sizecheck(); } mtx_unlock(&sw_dev_mtx); return; } } panic("Swapdev not found"); } /* * SYSCTL_SWAP_FRAGMENTATION() - produce raw swap space stats */ static int sysctl_swap_fragmentation(SYSCTL_HANDLER_ARGS) { struct sbuf sbuf; struct swdevt *sp; const char *devname; int error; error = sysctl_wire_old_buffer(req, 0); if (error != 0) return (error); sbuf_new_for_sysctl(&sbuf, NULL, 128, req); mtx_lock(&sw_dev_mtx); TAILQ_FOREACH(sp, &swtailq, sw_list) { if (vn_isdisk(sp->sw_vp, NULL)) devname = devtoname(sp->sw_vp->v_rdev); else devname = "[file]"; sbuf_printf(&sbuf, "\nFree space on device %s:\n", devname); blist_stats(sp->sw_blist, &sbuf); } mtx_unlock(&sw_dev_mtx); error = sbuf_finish(&sbuf); sbuf_delete(&sbuf); return (error); } /* * SWAP_PAGER_FREESPACE() - frees swap blocks associated with a page * range within an object. * * This is a globally accessible routine. * * This routine removes swapblk assignments from swap metadata. * * The external callers of this routine typically have already destroyed * or renamed vm_page_t's associated with this range in the object so * we should be ok. * * The object must be locked. */ void swap_pager_freespace(vm_object_t object, vm_pindex_t start, vm_size_t size) { swp_pager_meta_free(object, start, size); } /* * SWAP_PAGER_RESERVE() - reserve swap blocks in object * * Assigns swap blocks to the specified range within the object. The * swap blocks are not zeroed. Any previous swap assignment is destroyed. * * Returns 0 on success, -1 on failure. */ int swap_pager_reserve(vm_object_t object, vm_pindex_t start, vm_size_t size) { int n = 0; daddr_t blk = SWAPBLK_NONE; vm_pindex_t beg = start; /* save start index */ VM_OBJECT_WLOCK(object); while (size) { if (n == 0) { n = BLIST_MAX_ALLOC; while ((blk = swp_pager_getswapspace(n)) == SWAPBLK_NONE) { n >>= 1; if (n == 0) { swp_pager_meta_free(object, beg, start - beg); VM_OBJECT_WUNLOCK(object); return (-1); } } } swp_pager_meta_build(object, start, blk); --size; ++start; ++blk; --n; } swp_pager_meta_free(object, start, n); VM_OBJECT_WUNLOCK(object); return (0); } /* * SWAP_PAGER_COPY() - copy blocks from source pager to destination pager * and destroy the source. * * Copy any valid swapblks from the source to the destination. In * cases where both the source and destination have a valid swapblk, * we keep the destination's. * * This routine is allowed to sleep. It may sleep allocating metadata * indirectly through swp_pager_meta_build() or if paging is still in * progress on the source. * * The source object contains no vm_page_t's (which is just as well) * * The source object is of type OBJT_SWAP. * * The source and destination objects must be locked. * Both object locks may temporarily be released. */ void swap_pager_copy(vm_object_t srcobject, vm_object_t dstobject, vm_pindex_t offset, int destroysource) { vm_pindex_t i; VM_OBJECT_ASSERT_WLOCKED(srcobject); VM_OBJECT_ASSERT_WLOCKED(dstobject); /* * If destroysource is set, we remove the source object from the * swap_pager internal queue now. */ if (destroysource && srcobject->handle != NULL) { vm_object_pip_add(srcobject, 1); VM_OBJECT_WUNLOCK(srcobject); vm_object_pip_add(dstobject, 1); VM_OBJECT_WUNLOCK(dstobject); sx_xlock(&sw_alloc_sx); TAILQ_REMOVE(NOBJLIST(srcobject->handle), srcobject, pager_object_list); sx_xunlock(&sw_alloc_sx); VM_OBJECT_WLOCK(dstobject); vm_object_pip_wakeup(dstobject); VM_OBJECT_WLOCK(srcobject); vm_object_pip_wakeup(srcobject); } /* * transfer source to destination. */ for (i = 0; i < dstobject->size; ++i) { daddr_t dstaddr; /* * Locate (without changing) the swapblk on the destination, * unless it is invalid in which case free it silently, or * if the destination is a resident page, in which case the * source is thrown away. */ dstaddr = swp_pager_meta_ctl(dstobject, i, 0); if (dstaddr == SWAPBLK_NONE) { /* * Destination has no swapblk and is not resident, * copy source. */ daddr_t srcaddr; srcaddr = swp_pager_meta_ctl( srcobject, i + offset, SWM_POP ); if (srcaddr != SWAPBLK_NONE) { /* * swp_pager_meta_build() can sleep. */ vm_object_pip_add(srcobject, 1); VM_OBJECT_WUNLOCK(srcobject); vm_object_pip_add(dstobject, 1); swp_pager_meta_build(dstobject, i, srcaddr); vm_object_pip_wakeup(dstobject); VM_OBJECT_WLOCK(srcobject); vm_object_pip_wakeup(srcobject); } } else { /* * Destination has valid swapblk or it is represented * by a resident page. We destroy the sourceblock. */ swp_pager_meta_ctl(srcobject, i + offset, SWM_FREE); } } /* * Free left over swap blocks in source. * * We have to revert the type to OBJT_DEFAULT so we do not accidentally * double-remove the object from the swap queues. */ if (destroysource) { swp_pager_meta_free_all(srcobject); /* * Reverting the type is not necessary, the caller is going * to destroy srcobject directly, but I'm doing it here * for consistency since we've removed the object from its * queues. */ srcobject->type = OBJT_DEFAULT; } } /* * SWAP_PAGER_HASPAGE() - determine if we have good backing store for * the requested page. * * We determine whether good backing store exists for the requested * page and return TRUE if it does, FALSE if it doesn't. * * If TRUE, we also try to determine how much valid, contiguous backing * store exists before and after the requested page. */ static boolean_t swap_pager_haspage(vm_object_t object, vm_pindex_t pindex, int *before, int *after) { daddr_t blk, blk0; int i; VM_OBJECT_ASSERT_LOCKED(object); /* * do we have good backing store at the requested index ? */ blk0 = swp_pager_meta_ctl(object, pindex, 0); if (blk0 == SWAPBLK_NONE) { if (before) *before = 0; if (after) *after = 0; return (FALSE); } /* * find backwards-looking contiguous good backing store */ if (before != NULL) { for (i = 1; i < SWB_NPAGES; i++) { if (i > pindex) break; blk = swp_pager_meta_ctl(object, pindex - i, 0); if (blk != blk0 - i) break; } *before = i - 1; } /* * find forward-looking contiguous good backing store */ if (after != NULL) { for (i = 1; i < SWB_NPAGES; i++) { blk = swp_pager_meta_ctl(object, pindex + i, 0); if (blk != blk0 + i) break; } *after = i - 1; } return (TRUE); } /* * SWAP_PAGER_PAGE_UNSWAPPED() - remove swap backing store related to page * * This removes any associated swap backing store, whether valid or * not, from the page. * * This routine is typically called when a page is made dirty, at * which point any associated swap can be freed. MADV_FREE also * calls us in a special-case situation * * NOTE!!! If the page is clean and the swap was valid, the caller * should make the page dirty before calling this routine. This routine * does NOT change the m->dirty status of the page. Also: MADV_FREE * depends on it. * * This routine may not sleep. * * The object containing the page must be locked. */ static void swap_pager_unswapped(vm_page_t m) { swp_pager_meta_ctl(m->object, m->pindex, SWM_FREE); } /* * swap_pager_getpages() - bring pages in from swap * * Attempt to page in the pages in array "m" of length "count". The caller * may optionally specify that additional pages preceding and succeeding * the specified range be paged in. The number of such pages is returned * in the "rbehind" and "rahead" parameters, and they will be in the * inactive queue upon return. * * The pages in "m" must be busied and will remain busied upon return. */ static int swap_pager_getpages(vm_object_t object, vm_page_t *m, int count, int *rbehind, int *rahead) { struct buf *bp; vm_page_t mpred, msucc, p; vm_pindex_t pindex; daddr_t blk; int i, j, maxahead, maxbehind, reqcount, shift; reqcount = count; VM_OBJECT_WUNLOCK(object); bp = getpbuf(&nsw_rcount); VM_OBJECT_WLOCK(object); if (!swap_pager_haspage(object, m[0]->pindex, &maxbehind, &maxahead)) { relpbuf(bp, &nsw_rcount); return (VM_PAGER_FAIL); } /* * Clip the readahead and readbehind ranges to exclude resident pages. */ if (rahead != NULL) { KASSERT(reqcount - 1 <= maxahead, ("page count %d extends beyond swap block", reqcount)); *rahead = imin(*rahead, maxahead - (reqcount - 1)); pindex = m[reqcount - 1]->pindex; msucc = TAILQ_NEXT(m[reqcount - 1], listq); if (msucc != NULL && msucc->pindex - pindex - 1 < *rahead) *rahead = msucc->pindex - pindex - 1; } if (rbehind != NULL) { *rbehind = imin(*rbehind, maxbehind); pindex = m[0]->pindex; mpred = TAILQ_PREV(m[0], pglist, listq); if (mpred != NULL && pindex - mpred->pindex - 1 < *rbehind) *rbehind = pindex - mpred->pindex - 1; } /* * Allocate readahead and readbehind pages. */ shift = rbehind != NULL ? *rbehind : 0; if (shift != 0) { for (i = 1; i <= shift; i++) { p = vm_page_alloc(object, m[0]->pindex - i, VM_ALLOC_NORMAL); if (p == NULL) { /* Shift allocated pages to the left. */ for (j = 0; j < i - 1; j++) bp->b_pages[j] = bp->b_pages[j + shift - i + 1]; break; } bp->b_pages[shift - i] = p; } shift = i - 1; *rbehind = shift; } for (i = 0; i < reqcount; i++) bp->b_pages[i + shift] = m[i]; if (rahead != NULL) { for (i = 0; i < *rahead; i++) { p = vm_page_alloc(object, m[reqcount - 1]->pindex + i + 1, VM_ALLOC_NORMAL); if (p == NULL) break; bp->b_pages[shift + reqcount + i] = p; } *rahead = i; } if (rbehind != NULL) count += *rbehind; if (rahead != NULL) count += *rahead; vm_object_pip_add(object, count); for (i = 0; i < count; i++) bp->b_pages[i]->oflags |= VPO_SWAPINPROG; pindex = bp->b_pages[0]->pindex; blk = swp_pager_meta_ctl(object, pindex, 0); KASSERT(blk != SWAPBLK_NONE, ("no swap blocking containing %p(%jx)", object, (uintmax_t)pindex)); VM_OBJECT_WUNLOCK(object); bp->b_flags |= B_PAGING; bp->b_iocmd = BIO_READ; bp->b_iodone = swp_pager_async_iodone; bp->b_rcred = crhold(thread0.td_ucred); bp->b_wcred = crhold(thread0.td_ucred); bp->b_blkno = blk; bp->b_bcount = PAGE_SIZE * count; bp->b_bufsize = PAGE_SIZE * count; bp->b_npages = count; bp->b_pgbefore = rbehind != NULL ? *rbehind : 0; bp->b_pgafter = rahead != NULL ? *rahead : 0; PCPU_INC(cnt.v_swapin); PCPU_ADD(cnt.v_swappgsin, count); /* * perform the I/O. NOTE!!! bp cannot be considered valid after * this point because we automatically release it on completion. * Instead, we look at the one page we are interested in which we * still hold a lock on even through the I/O completion. * * The other pages in our m[] array are also released on completion, * so we cannot assume they are valid anymore either. * * NOTE: b_blkno is destroyed by the call to swapdev_strategy */ BUF_KERNPROC(bp); swp_pager_strategy(bp); /* * Wait for the pages we want to complete. VPO_SWAPINPROG is always * cleared on completion. If an I/O error occurs, SWAPBLK_NONE * is set in the metadata for each page in the request. */ VM_OBJECT_WLOCK(object); while ((m[0]->oflags & VPO_SWAPINPROG) != 0) { m[0]->oflags |= VPO_SWAPSLEEP; PCPU_INC(cnt.v_intrans); if (VM_OBJECT_SLEEP(object, &object->paging_in_progress, PSWP, "swread", hz * 20)) { printf( "swap_pager: indefinite wait buffer: bufobj: %p, blkno: %jd, size: %ld\n", bp->b_bufobj, (intmax_t)bp->b_blkno, bp->b_bcount); } } /* * If we had an unrecoverable read error pages will not be valid. */ for (i = 0; i < reqcount; i++) if (m[i]->valid != VM_PAGE_BITS_ALL) return (VM_PAGER_ERROR); return (VM_PAGER_OK); /* * A final note: in a low swap situation, we cannot deallocate swap * and mark a page dirty here because the caller is likely to mark * the page clean when we return, causing the page to possibly revert * to all-zero's later. */ } /* * swap_pager_getpages_async(): * * Right now this is emulation of asynchronous operation on top of * swap_pager_getpages(). */ static int swap_pager_getpages_async(vm_object_t object, vm_page_t *m, int count, int *rbehind, int *rahead, pgo_getpages_iodone_t iodone, void *arg) { int r, error; r = swap_pager_getpages(object, m, count, rbehind, rahead); VM_OBJECT_WUNLOCK(object); switch (r) { case VM_PAGER_OK: error = 0; break; case VM_PAGER_ERROR: error = EIO; break; case VM_PAGER_FAIL: error = EINVAL; break; default: panic("unhandled swap_pager_getpages() error %d", r); } (iodone)(arg, m, count, error); VM_OBJECT_WLOCK(object); return (r); } /* * swap_pager_putpages: * * Assign swap (if necessary) and initiate I/O on the specified pages. * * We support both OBJT_DEFAULT and OBJT_SWAP objects. DEFAULT objects * are automatically converted to SWAP objects. * * In a low memory situation we may block in VOP_STRATEGY(), but the new * vm_page reservation system coupled with properly written VFS devices * should ensure that no low-memory deadlock occurs. This is an area * which needs work. * * The parent has N vm_object_pip_add() references prior to * calling us and will remove references for rtvals[] that are * not set to VM_PAGER_PEND. We need to remove the rest on I/O * completion. * * The parent has soft-busy'd the pages it passes us and will unbusy * those whos rtvals[] entry is not set to VM_PAGER_PEND on return. * We need to unbusy the rest on I/O completion. */ static void swap_pager_putpages(vm_object_t object, vm_page_t *m, int count, int flags, int *rtvals) { int i, n; boolean_t sync; if (count && m[0]->object != object) { panic("swap_pager_putpages: object mismatch %p/%p", object, m[0]->object ); } /* * Step 1 * * Turn object into OBJT_SWAP * check for bogus sysops * force sync if not pageout process */ if (object->type != OBJT_SWAP) swp_pager_meta_build(object, 0, SWAPBLK_NONE); VM_OBJECT_WUNLOCK(object); n = 0; if (curproc != pageproc) sync = TRUE; else sync = (flags & VM_PAGER_PUT_SYNC) != 0; /* * Step 2 * * Assign swap blocks and issue I/O. We reallocate swap on the fly. * The page is left dirty until the pageout operation completes * successfully. */ for (i = 0; i < count; i += n) { int j; struct buf *bp; daddr_t blk; /* * Maximum I/O size is limited by a number of factors. */ n = min(BLIST_MAX_ALLOC, count - i); n = min(n, nsw_cluster_max); /* * Get biggest block of swap we can. If we fail, fall * back and try to allocate a smaller block. Don't go * overboard trying to allocate space if it would overly * fragment swap. */ while ( (blk = swp_pager_getswapspace(n)) == SWAPBLK_NONE && n > 4 ) { n >>= 1; } if (blk == SWAPBLK_NONE) { for (j = 0; j < n; ++j) rtvals[i+j] = VM_PAGER_FAIL; continue; } /* * All I/O parameters have been satisfied, build the I/O * request and assign the swap space. */ if (sync == TRUE) { bp = getpbuf(&nsw_wcount_sync); } else { bp = getpbuf(&nsw_wcount_async); bp->b_flags = B_ASYNC; } bp->b_flags |= B_PAGING; bp->b_iocmd = BIO_WRITE; bp->b_rcred = crhold(thread0.td_ucred); bp->b_wcred = crhold(thread0.td_ucred); bp->b_bcount = PAGE_SIZE * n; bp->b_bufsize = PAGE_SIZE * n; bp->b_blkno = blk; VM_OBJECT_WLOCK(object); for (j = 0; j < n; ++j) { vm_page_t mreq = m[i+j]; swp_pager_meta_build( mreq->object, mreq->pindex, blk + j ); MPASS(mreq->dirty == VM_PAGE_BITS_ALL); mreq->oflags |= VPO_SWAPINPROG; bp->b_pages[j] = mreq; } VM_OBJECT_WUNLOCK(object); bp->b_npages = n; /* * Must set dirty range for NFS to work. */ bp->b_dirtyoff = 0; bp->b_dirtyend = bp->b_bcount; PCPU_INC(cnt.v_swapout); PCPU_ADD(cnt.v_swappgsout, bp->b_npages); /* * We unconditionally set rtvals[] to VM_PAGER_PEND so that we * can call the async completion routine at the end of a * synchronous I/O operation. Otherwise, our caller would * perform duplicate unbusy and wakeup operations on the page * and object, respectively. */ for (j = 0; j < n; j++) rtvals[i + j] = VM_PAGER_PEND; /* * asynchronous * * NOTE: b_blkno is destroyed by the call to swapdev_strategy */ if (sync == FALSE) { bp->b_iodone = swp_pager_async_iodone; BUF_KERNPROC(bp); swp_pager_strategy(bp); continue; } /* * synchronous * * NOTE: b_blkno is destroyed by the call to swapdev_strategy */ bp->b_iodone = bdone; swp_pager_strategy(bp); /* * Wait for the sync I/O to complete. */ bwait(bp, PVM, "swwrt"); /* * Now that we are through with the bp, we can call the * normal async completion, which frees everything up. */ swp_pager_async_iodone(bp); } VM_OBJECT_WLOCK(object); } /* * swp_pager_async_iodone: * * Completion routine for asynchronous reads and writes from/to swap. * Also called manually by synchronous code to finish up a bp. * * This routine may not sleep. */ static void swp_pager_async_iodone(struct buf *bp) { int i; vm_object_t object = NULL; /* * report error */ if (bp->b_ioflags & BIO_ERROR) { printf( "swap_pager: I/O error - %s failed; blkno %ld," "size %ld, error %d\n", ((bp->b_iocmd == BIO_READ) ? "pagein" : "pageout"), (long)bp->b_blkno, (long)bp->b_bcount, bp->b_error ); } /* * remove the mapping for kernel virtual */ if (buf_mapped(bp)) pmap_qremove((vm_offset_t)bp->b_data, bp->b_npages); else bp->b_data = bp->b_kvabase; if (bp->b_npages) { object = bp->b_pages[0]->object; VM_OBJECT_WLOCK(object); } /* * cleanup pages. If an error occurs writing to swap, we are in * very serious trouble. If it happens to be a disk error, though, * we may be able to recover by reassigning the swap later on. So * in this case we remove the m->swapblk assignment for the page * but do not free it in the rlist. The errornous block(s) are thus * never reallocated as swap. Redirty the page and continue. */ for (i = 0; i < bp->b_npages; ++i) { vm_page_t m = bp->b_pages[i]; m->oflags &= ~VPO_SWAPINPROG; if (m->oflags & VPO_SWAPSLEEP) { m->oflags &= ~VPO_SWAPSLEEP; wakeup(&object->paging_in_progress); } if (bp->b_ioflags & BIO_ERROR) { /* * If an error occurs I'd love to throw the swapblk * away without freeing it back to swapspace, so it * can never be used again. But I can't from an * interrupt. */ if (bp->b_iocmd == BIO_READ) { /* * NOTE: for reads, m->dirty will probably * be overridden by the original caller of * getpages so don't play cute tricks here. */ m->valid = 0; } else { /* * If a write error occurs, reactivate page * so it doesn't clog the inactive list, * then finish the I/O. */ MPASS(m->dirty == VM_PAGE_BITS_ALL); vm_page_lock(m); vm_page_activate(m); vm_page_unlock(m); vm_page_sunbusy(m); } } else if (bp->b_iocmd == BIO_READ) { /* * NOTE: for reads, m->dirty will probably be * overridden by the original caller of getpages so * we cannot set them in order to free the underlying * swap in a low-swap situation. I don't think we'd * want to do that anyway, but it was an optimization * that existed in the old swapper for a time before * it got ripped out due to precisely this problem. */ KASSERT(!pmap_page_is_mapped(m), ("swp_pager_async_iodone: page %p is mapped", m)); KASSERT(m->dirty == 0, ("swp_pager_async_iodone: page %p is dirty", m)); m->valid = VM_PAGE_BITS_ALL; if (i < bp->b_pgbefore || i >= bp->b_npages - bp->b_pgafter) vm_page_readahead_finish(m); } else { /* * For write success, clear the dirty * status, then finish the I/O ( which decrements the * busy count and possibly wakes waiter's up ). * A page is only written to swap after a period of * inactivity. Therefore, we do not expect it to be * reused. */ KASSERT(!pmap_page_is_write_mapped(m), ("swp_pager_async_iodone: page %p is not write" " protected", m)); vm_page_undirty(m); vm_page_lock(m); vm_page_deactivate_noreuse(m); vm_page_unlock(m); vm_page_sunbusy(m); } } /* * adjust pip. NOTE: the original parent may still have its own * pip refs on the object. */ if (object != NULL) { vm_object_pip_wakeupn(object, bp->b_npages); VM_OBJECT_WUNLOCK(object); } /* * swapdev_strategy() manually sets b_vp and b_bufobj before calling * bstrategy(). Set them back to NULL now we're done with it, or we'll * trigger a KASSERT in relpbuf(). */ if (bp->b_vp) { bp->b_vp = NULL; bp->b_bufobj = NULL; } /* * release the physical I/O buffer */ relpbuf( bp, ((bp->b_iocmd == BIO_READ) ? &nsw_rcount : ((bp->b_flags & B_ASYNC) ? &nsw_wcount_async : &nsw_wcount_sync ) ) ); } /* * SWP_PAGER_FORCE_PAGEIN() - force a swap block to be paged in * * This routine dissociates the page at the given index within an object * from its backing store, paging it in if it does not reside in memory. * If the page is paged in, it is marked dirty and placed in the laundry * queue. The page is marked dirty because it no longer has backing * store. It is placed in the laundry queue because it has not been * accessed recently. Otherwise, it would already reside in memory. * * We also attempt to swap in all other pages in the swap block. * However, we only guarantee that the one at the specified index is * paged in. * * XXX - The code to page the whole block in doesn't work, so we * revert to the one-by-one behavior for now. Sigh. */ static inline void swp_pager_force_pagein(vm_object_t object, vm_pindex_t pindex) { vm_page_t m; vm_object_pip_add(object, 1); m = vm_page_grab(object, pindex, VM_ALLOC_NORMAL); if (m->valid == VM_PAGE_BITS_ALL) { vm_object_pip_wakeup(object); vm_page_dirty(m); vm_page_lock(m); vm_page_activate(m); vm_page_unlock(m); vm_page_xunbusy(m); vm_pager_page_unswapped(m); return; } if (swap_pager_getpages(object, &m, 1, NULL, NULL) != VM_PAGER_OK) panic("swap_pager_force_pagein: read from swap failed");/*XXX*/ vm_object_pip_wakeup(object); vm_page_dirty(m); vm_page_lock(m); vm_page_launder(m); vm_page_unlock(m); vm_page_xunbusy(m); vm_pager_page_unswapped(m); } /* * swap_pager_swapoff: * * Page in all of the pages that have been paged out to the * given device. The corresponding blocks in the bitmap must be * marked as allocated and the device must be flagged SW_CLOSING. * There may be no processes swapped out to the device. * * This routine may block. */ static void swap_pager_swapoff(struct swdevt *sp) { struct swblk *sb; vm_object_t object; vm_pindex_t pi; int i, retries; sx_assert(&swdev_syscall_lock, SA_XLOCKED); retries = 0; full_rescan: mtx_lock(&vm_object_list_mtx); TAILQ_FOREACH(object, &vm_object_list, object_list) { if (object->type != OBJT_SWAP) continue; mtx_unlock(&vm_object_list_mtx); /* Depends on type-stability. */ VM_OBJECT_WLOCK(object); /* * Dead objects are eventually terminated on their own. */ if ((object->flags & OBJ_DEAD) != 0) goto next_obj; /* * Sync with fences placed after pctrie * initialization. We must not access pctrie below * unless we checked that our object is swap and not * dead. */ atomic_thread_fence_acq(); if (object->type != OBJT_SWAP) goto next_obj; for (pi = 0; (sb = SWAP_PCTRIE_LOOKUP_GE( &object->un_pager.swp.swp_blks, pi)) != NULL; ) { pi = sb->p + SWAP_META_PAGES; for (i = 0; i < SWAP_META_PAGES; i++) { if (sb->d[i] == SWAPBLK_NONE) continue; if (swp_pager_isondev(sb->d[i], sp)) swp_pager_force_pagein(object, sb->p + i); } } next_obj: VM_OBJECT_WUNLOCK(object); mtx_lock(&vm_object_list_mtx); } mtx_unlock(&vm_object_list_mtx); if (sp->sw_used) { /* * Objects may be locked or paging to the device being * removed, so we will miss their pages and need to * make another pass. We have marked this device as * SW_CLOSING, so the activity should finish soon. */ retries++; if (retries > 100) { panic("swapoff: failed to locate %d swap blocks", sp->sw_used); } pause("swpoff", hz / 20); goto full_rescan; } } /************************************************************************ * SWAP META DATA * ************************************************************************ * * These routines manipulate the swap metadata stored in the * OBJT_SWAP object. * * Swap metadata is implemented with a global hash and not directly * linked into the object. Instead the object simply contains * appropriate tracking counters. */ /* * SWP_PAGER_META_BUILD() - add swap block to swap meta data for object * * We first convert the object to a swap object if it is a default * object. * * The specified swapblk is added to the object's swap metadata. If * the swapblk is not valid, it is freed instead. Any previously * assigned swapblk is freed. */ static void swp_pager_meta_build(vm_object_t object, vm_pindex_t pindex, daddr_t swapblk) { static volatile int swblk_zone_exhausted, swpctrie_zone_exhausted; struct swblk *sb, *sb1; vm_pindex_t modpi, rdpi; int error, i; VM_OBJECT_ASSERT_WLOCKED(object); /* * Convert default object to swap object if necessary */ if (object->type != OBJT_SWAP) { pctrie_init(&object->un_pager.swp.swp_blks); /* * Ensure that swap_pager_swapoff()'s iteration over * object_list does not see a garbage pctrie. */ atomic_thread_fence_rel(); object->type = OBJT_SWAP; KASSERT(object->handle == NULL, ("default pager with handle")); } rdpi = rounddown(pindex, SWAP_META_PAGES); sb = SWAP_PCTRIE_LOOKUP(&object->un_pager.swp.swp_blks, rdpi); if (sb == NULL) { if (swapblk == SWAPBLK_NONE) return; for (;;) { sb = uma_zalloc(swblk_zone, M_NOWAIT | (curproc == pageproc ? M_USE_RESERVE : 0)); if (sb != NULL) { sb->p = rdpi; for (i = 0; i < SWAP_META_PAGES; i++) sb->d[i] = SWAPBLK_NONE; if (atomic_cmpset_int(&swblk_zone_exhausted, 1, 0)) printf("swblk zone ok\n"); break; } VM_OBJECT_WUNLOCK(object); if (uma_zone_exhausted(swblk_zone)) { if (atomic_cmpset_int(&swblk_zone_exhausted, 0, 1)) printf("swap blk zone exhausted, " "increase kern.maxswzone\n"); vm_pageout_oom(VM_OOM_SWAPZ); pause("swzonxb", 10); } else VM_WAIT; VM_OBJECT_WLOCK(object); sb = SWAP_PCTRIE_LOOKUP(&object->un_pager.swp.swp_blks, rdpi); if (sb != NULL) /* * Somebody swapped out a nearby page, * allocating swblk at the rdpi index, * while we dropped the object lock. */ goto allocated; } for (;;) { error = SWAP_PCTRIE_INSERT( &object->un_pager.swp.swp_blks, sb); if (error == 0) { if (atomic_cmpset_int(&swpctrie_zone_exhausted, 1, 0)) printf("swpctrie zone ok\n"); break; } VM_OBJECT_WUNLOCK(object); if (uma_zone_exhausted(swpctrie_zone)) { if (atomic_cmpset_int(&swpctrie_zone_exhausted, 0, 1)) printf("swap pctrie zone exhausted, " "increase kern.maxswzone\n"); vm_pageout_oom(VM_OOM_SWAPZ); pause("swzonxp", 10); } else VM_WAIT; VM_OBJECT_WLOCK(object); sb1 = SWAP_PCTRIE_LOOKUP(&object->un_pager.swp.swp_blks, rdpi); if (sb1 != NULL) { uma_zfree(swblk_zone, sb); sb = sb1; goto allocated; } } } allocated: MPASS(sb->p == rdpi); modpi = pindex % SWAP_META_PAGES; /* Delete prior contents of metadata. */ if (sb->d[modpi] != SWAPBLK_NONE) swp_pager_freeswapspace(sb->d[modpi], 1); /* Enter block into metadata. */ sb->d[modpi] = swapblk; /* * Free the swblk if we end up with the empty page run. */ if (swapblk == SWAPBLK_NONE) { for (i = 0; i < SWAP_META_PAGES; i++) { if (sb->d[i] != SWAPBLK_NONE) break; } if (i == SWAP_META_PAGES) { SWAP_PCTRIE_REMOVE(&object->un_pager.swp.swp_blks, rdpi); uma_zfree(swblk_zone, sb); } } } /* * SWP_PAGER_META_FREE() - free a range of blocks in the object's swap metadata * * The requested range of blocks is freed, with any associated swap * returned to the swap bitmap. * * This routine will free swap metadata structures as they are cleaned * out. This routine does *NOT* operate on swap metadata associated * with resident pages. */ static void swp_pager_meta_free(vm_object_t object, vm_pindex_t pindex, vm_pindex_t count) { struct swblk *sb; vm_pindex_t last; int i; bool empty; VM_OBJECT_ASSERT_WLOCKED(object); if (object->type != OBJT_SWAP || count == 0) return; last = pindex + count - 1; for (;;) { sb = SWAP_PCTRIE_LOOKUP_GE(&object->un_pager.swp.swp_blks, rounddown(pindex, SWAP_META_PAGES)); if (sb == NULL || sb->p > last) break; empty = true; for (i = 0; i < SWAP_META_PAGES; i++) { if (sb->d[i] == SWAPBLK_NONE) continue; if (pindex <= sb->p + i && sb->p + i <= last) { swp_pager_freeswapspace(sb->d[i], 1); sb->d[i] = SWAPBLK_NONE; } else empty = false; } pindex = sb->p + SWAP_META_PAGES; if (empty) { SWAP_PCTRIE_REMOVE(&object->un_pager.swp.swp_blks, sb->p); uma_zfree(swblk_zone, sb); } } } /* * SWP_PAGER_META_FREE_ALL() - destroy all swap metadata associated with object * * This routine locates and destroys all swap metadata associated with * an object. */ static void swp_pager_meta_free_all(vm_object_t object) { struct swblk *sb; vm_pindex_t pindex; int i; VM_OBJECT_ASSERT_WLOCKED(object); if (object->type != OBJT_SWAP) return; for (pindex = 0; (sb = SWAP_PCTRIE_LOOKUP_GE( &object->un_pager.swp.swp_blks, pindex)) != NULL;) { pindex = sb->p + SWAP_META_PAGES; for (i = 0; i < SWAP_META_PAGES; i++) { if (sb->d[i] != SWAPBLK_NONE) swp_pager_freeswapspace(sb->d[i], 1); } SWAP_PCTRIE_REMOVE(&object->un_pager.swp.swp_blks, sb->p); uma_zfree(swblk_zone, sb); } } /* * SWP_PAGER_METACTL() - misc control of swap and vm_page_t meta data. * * This routine is capable of looking up, popping, or freeing * swapblk assignments in the swap meta data or in the vm_page_t. * The routine typically returns the swapblk being looked-up, or popped, * or SWAPBLK_NONE if the block was freed, or SWAPBLK_NONE if the block * was invalid. This routine will automatically free any invalid * meta-data swapblks. * * When acting on a busy resident page and paging is in progress, we * have to wait until paging is complete but otherwise can act on the * busy page. * * SWM_FREE remove and free swap block from metadata * SWM_POP remove from meta data but do not free.. pop it out */ static daddr_t swp_pager_meta_ctl(vm_object_t object, vm_pindex_t pindex, int flags) { struct swblk *sb; daddr_t r1; int i; if ((flags & (SWM_FREE | SWM_POP)) != 0) VM_OBJECT_ASSERT_WLOCKED(object); else VM_OBJECT_ASSERT_LOCKED(object); /* * The meta data only exists if the object is OBJT_SWAP * and even then might not be allocated yet. */ if (object->type != OBJT_SWAP) return (SWAPBLK_NONE); sb = SWAP_PCTRIE_LOOKUP(&object->un_pager.swp.swp_blks, rounddown(pindex, SWAP_META_PAGES)); if (sb == NULL) return (SWAPBLK_NONE); r1 = sb->d[pindex % SWAP_META_PAGES]; if (r1 == SWAPBLK_NONE) return (SWAPBLK_NONE); if ((flags & (SWM_FREE | SWM_POP)) != 0) { sb->d[pindex % SWAP_META_PAGES] = SWAPBLK_NONE; for (i = 0; i < SWAP_META_PAGES; i++) { if (sb->d[i] != SWAPBLK_NONE) break; } if (i == SWAP_META_PAGES) { SWAP_PCTRIE_REMOVE(&object->un_pager.swp.swp_blks, rounddown(pindex, SWAP_META_PAGES)); uma_zfree(swblk_zone, sb); } } if ((flags & SWM_FREE) != 0) { swp_pager_freeswapspace(r1, 1); r1 = SWAPBLK_NONE; } return (r1); } /* * Returns the least page index which is greater than or equal to the * parameter pindex and for which there is a swap block allocated. * Returns object's size if the object's type is not swap or if there * are no allocated swap blocks for the object after the requested * pindex. */ vm_pindex_t swap_pager_find_least(vm_object_t object, vm_pindex_t pindex) { struct swblk *sb; int i; VM_OBJECT_ASSERT_LOCKED(object); if (object->type != OBJT_SWAP) return (object->size); sb = SWAP_PCTRIE_LOOKUP_GE(&object->un_pager.swp.swp_blks, rounddown(pindex, SWAP_META_PAGES)); if (sb == NULL) return (object->size); if (sb->p < pindex) { for (i = pindex % SWAP_META_PAGES; i < SWAP_META_PAGES; i++) { if (sb->d[i] != SWAPBLK_NONE) return (sb->p + i); } sb = SWAP_PCTRIE_LOOKUP_GE(&object->un_pager.swp.swp_blks, roundup(pindex, SWAP_META_PAGES)); if (sb == NULL) return (object->size); } for (i = 0; i < SWAP_META_PAGES; i++) { if (sb->d[i] != SWAPBLK_NONE) return (sb->p + i); } /* * We get here if a swblk is present in the trie but it * doesn't map any blocks. */ MPASS(0); return (object->size); } /* * System call swapon(name) enables swapping on device name, * which must be in the swdevsw. Return EBUSY * if already swapping on this device. */ #ifndef _SYS_SYSPROTO_H_ struct swapon_args { char *name; }; #endif /* * MPSAFE */ /* ARGSUSED */ int sys_swapon(struct thread *td, struct swapon_args *uap) { struct vattr attr; struct vnode *vp; struct nameidata nd; int error; error = priv_check(td, PRIV_SWAPON); if (error) return (error); sx_xlock(&swdev_syscall_lock); /* * Swap metadata may not fit in the KVM if we have physical * memory of >1GB. */ if (swblk_zone == NULL) { error = ENOMEM; goto done; } NDINIT(&nd, LOOKUP, ISOPEN | FOLLOW | AUDITVNODE1, UIO_USERSPACE, uap->name, td); error = namei(&nd); if (error) goto done; NDFREE(&nd, NDF_ONLY_PNBUF); vp = nd.ni_vp; if (vn_isdisk(vp, &error)) { error = swapongeom(vp); } else if (vp->v_type == VREG && (vp->v_mount->mnt_vfc->vfc_flags & VFCF_NETWORK) != 0 && (error = VOP_GETATTR(vp, &attr, td->td_ucred)) == 0) { /* * Allow direct swapping to NFS regular files in the same * way that nfs_mountroot() sets up diskless swapping. */ error = swaponvp(td, vp, attr.va_size / DEV_BSIZE); } if (error) vrele(vp); done: sx_xunlock(&swdev_syscall_lock); return (error); } /* * Check that the total amount of swap currently configured does not * exceed half the theoretical maximum. If it does, print a warning * message. */ static void swapon_check_swzone(void) { unsigned long maxpages, npages; npages = swap_total / PAGE_SIZE; /* absolute maximum we can handle assuming 100% efficiency */ maxpages = uma_zone_get_max(swblk_zone) * SWAP_META_PAGES; /* recommend using no more than half that amount */ if (npages > maxpages / 2) { printf("warning: total configured swap (%lu pages) " "exceeds maximum recommended amount (%lu pages).\n", npages, maxpages / 2); printf("warning: increase kern.maxswzone " "or reduce amount of swap.\n"); } } static void swaponsomething(struct vnode *vp, void *id, u_long nblks, sw_strategy_t *strategy, sw_close_t *close, dev_t dev, int flags) { struct swdevt *sp, *tsp; swblk_t dvbase; u_long mblocks; /* * nblks is in DEV_BSIZE'd chunks, convert to PAGE_SIZE'd chunks. * First chop nblks off to page-align it, then convert. * * sw->sw_nblks is in page-sized chunks now too. */ nblks &= ~(ctodb(1) - 1); nblks = dbtoc(nblks); /* * If we go beyond this, we get overflows in the radix * tree bitmap code. */ mblocks = 0x40000000 / BLIST_META_RADIX; if (nblks > mblocks) { printf( "WARNING: reducing swap size to maximum of %luMB per unit\n", mblocks / 1024 / 1024 * PAGE_SIZE); nblks = mblocks; } sp = malloc(sizeof *sp, M_VMPGDATA, M_WAITOK | M_ZERO); sp->sw_vp = vp; sp->sw_id = id; sp->sw_dev = dev; sp->sw_flags = 0; sp->sw_nblks = nblks; sp->sw_used = 0; sp->sw_strategy = strategy; sp->sw_close = close; sp->sw_flags = flags; sp->sw_blist = blist_create(nblks, M_WAITOK); /* * Do not free the first two block in order to avoid overwriting * any bsd label at the front of the partition */ blist_free(sp->sw_blist, 2, nblks - 2); dvbase = 0; mtx_lock(&sw_dev_mtx); TAILQ_FOREACH(tsp, &swtailq, sw_list) { if (tsp->sw_end >= dvbase) { /* * We put one uncovered page between the devices * in order to definitively prevent any cross-device * I/O requests */ dvbase = tsp->sw_end + 1; } } sp->sw_first = dvbase; sp->sw_end = dvbase + nblks; TAILQ_INSERT_TAIL(&swtailq, sp, sw_list); nswapdev++; swap_pager_avail += nblks - 2; swap_total += (vm_ooffset_t)nblks * PAGE_SIZE; swapon_check_swzone(); swp_sizecheck(); mtx_unlock(&sw_dev_mtx); } /* * SYSCALL: swapoff(devname) * * Disable swapping on the given device. * * XXX: Badly designed system call: it should use a device index * rather than filename as specification. We keep sw_vp around * only to make this work. */ #ifndef _SYS_SYSPROTO_H_ struct swapoff_args { char *name; }; #endif /* * MPSAFE */ /* ARGSUSED */ int sys_swapoff(struct thread *td, struct swapoff_args *uap) { struct vnode *vp; struct nameidata nd; struct swdevt *sp; int error; error = priv_check(td, PRIV_SWAPOFF); if (error) return (error); sx_xlock(&swdev_syscall_lock); NDINIT(&nd, LOOKUP, FOLLOW | AUDITVNODE1, UIO_USERSPACE, uap->name, td); error = namei(&nd); if (error) goto done; NDFREE(&nd, NDF_ONLY_PNBUF); vp = nd.ni_vp; mtx_lock(&sw_dev_mtx); TAILQ_FOREACH(sp, &swtailq, sw_list) { if (sp->sw_vp == vp) break; } mtx_unlock(&sw_dev_mtx); if (sp == NULL) { error = EINVAL; goto done; } error = swapoff_one(sp, td->td_ucred); done: sx_xunlock(&swdev_syscall_lock); return (error); } static int swapoff_one(struct swdevt *sp, struct ucred *cred) { u_long nblks; #ifdef MAC int error; #endif sx_assert(&swdev_syscall_lock, SA_XLOCKED); #ifdef MAC (void) vn_lock(sp->sw_vp, LK_EXCLUSIVE | LK_RETRY); error = mac_system_check_swapoff(cred, sp->sw_vp); (void) VOP_UNLOCK(sp->sw_vp, 0); if (error != 0) return (error); #endif nblks = sp->sw_nblks; /* * We can turn off this swap device safely only if the * available virtual memory in the system will fit the amount * of data we will have to page back in, plus an epsilon so * the system doesn't become critically low on swap space. */ if (vm_cnt.v_free_count + swap_pager_avail < nblks + nswap_lowat) return (ENOMEM); /* * Prevent further allocations on this device. */ mtx_lock(&sw_dev_mtx); sp->sw_flags |= SW_CLOSING; swap_pager_avail -= blist_fill(sp->sw_blist, 0, nblks); swap_total -= (vm_ooffset_t)nblks * PAGE_SIZE; mtx_unlock(&sw_dev_mtx); /* * Page in the contents of the device and close it. */ swap_pager_swapoff(sp); sp->sw_close(curthread, sp); mtx_lock(&sw_dev_mtx); sp->sw_id = NULL; TAILQ_REMOVE(&swtailq, sp, sw_list); nswapdev--; if (nswapdev == 0) { swap_pager_full = 2; swap_pager_almost_full = 1; } if (swdevhd == sp) swdevhd = NULL; mtx_unlock(&sw_dev_mtx); blist_destroy(sp->sw_blist); free(sp, M_VMPGDATA); return (0); } void swapoff_all(void) { struct swdevt *sp, *spt; const char *devname; int error; sx_xlock(&swdev_syscall_lock); mtx_lock(&sw_dev_mtx); TAILQ_FOREACH_SAFE(sp, &swtailq, sw_list, spt) { mtx_unlock(&sw_dev_mtx); if (vn_isdisk(sp->sw_vp, NULL)) devname = devtoname(sp->sw_vp->v_rdev); else devname = "[file]"; error = swapoff_one(sp, thread0.td_ucred); if (error != 0) { printf("Cannot remove swap device %s (error=%d), " "skipping.\n", devname, error); } else if (bootverbose) { printf("Swap device %s removed.\n", devname); } mtx_lock(&sw_dev_mtx); } mtx_unlock(&sw_dev_mtx); sx_xunlock(&swdev_syscall_lock); } void swap_pager_status(int *total, int *used) { struct swdevt *sp; *total = 0; *used = 0; mtx_lock(&sw_dev_mtx); TAILQ_FOREACH(sp, &swtailq, sw_list) { *total += sp->sw_nblks; *used += sp->sw_used; } mtx_unlock(&sw_dev_mtx); } int swap_dev_info(int name, struct xswdev *xs, char *devname, size_t len) { struct swdevt *sp; const char *tmp_devname; int error, n; n = 0; error = ENOENT; mtx_lock(&sw_dev_mtx); TAILQ_FOREACH(sp, &swtailq, sw_list) { if (n != name) { n++; continue; } xs->xsw_version = XSWDEV_VERSION; xs->xsw_dev = sp->sw_dev; xs->xsw_flags = sp->sw_flags; xs->xsw_nblks = sp->sw_nblks; xs->xsw_used = sp->sw_used; if (devname != NULL) { if (vn_isdisk(sp->sw_vp, NULL)) tmp_devname = devtoname(sp->sw_vp->v_rdev); else tmp_devname = "[file]"; strncpy(devname, tmp_devname, len); } error = 0; break; } mtx_unlock(&sw_dev_mtx); return (error); } static int sysctl_vm_swap_info(SYSCTL_HANDLER_ARGS) { struct xswdev xs; int error; if (arg2 != 1) /* name length */ return (EINVAL); error = swap_dev_info(*(int *)arg1, &xs, NULL, 0); if (error != 0) return (error); error = SYSCTL_OUT(req, &xs, sizeof(xs)); return (error); } SYSCTL_INT(_vm, OID_AUTO, nswapdev, CTLFLAG_RD, &nswapdev, 0, "Number of swap devices"); SYSCTL_NODE(_vm, OID_AUTO, swap_info, CTLFLAG_RD | CTLFLAG_MPSAFE, sysctl_vm_swap_info, "Swap statistics by device"); /* * Count the approximate swap usage in pages for a vmspace. The * shadowed or not yet copied on write swap blocks are not accounted. * The map must be locked. */ long vmspace_swap_count(struct vmspace *vmspace) { vm_map_t map; vm_map_entry_t cur; vm_object_t object; struct swblk *sb; vm_pindex_t e, pi; long count; int i; map = &vmspace->vm_map; count = 0; for (cur = map->header.next; cur != &map->header; cur = cur->next) { if ((cur->eflags & MAP_ENTRY_IS_SUB_MAP) != 0) continue; object = cur->object.vm_object; if (object == NULL || object->type != OBJT_SWAP) continue; VM_OBJECT_RLOCK(object); if (object->type != OBJT_SWAP) goto unlock; pi = OFF_TO_IDX(cur->offset); e = pi + OFF_TO_IDX(cur->end - cur->start); for (;; pi = sb->p + SWAP_META_PAGES) { sb = SWAP_PCTRIE_LOOKUP_GE( &object->un_pager.swp.swp_blks, pi); if (sb == NULL || sb->p >= e) break; for (i = 0; i < SWAP_META_PAGES; i++) { if (sb->p + i < e && sb->d[i] != SWAPBLK_NONE) count++; } } unlock: VM_OBJECT_RUNLOCK(object); } return (count); } /* * GEOM backend * * Swapping onto disk devices. * */ static g_orphan_t swapgeom_orphan; static struct g_class g_swap_class = { .name = "SWAP", .version = G_VERSION, .orphan = swapgeom_orphan, }; DECLARE_GEOM_CLASS(g_swap_class, g_class); static void swapgeom_close_ev(void *arg, int flags) { struct g_consumer *cp; cp = arg; g_access(cp, -1, -1, 0); g_detach(cp); g_destroy_consumer(cp); } /* * Add a reference to the g_consumer for an inflight transaction. */ static void swapgeom_acquire(struct g_consumer *cp) { mtx_assert(&sw_dev_mtx, MA_OWNED); cp->index++; } /* * Remove a reference from the g_consumer. Post a close event if all * references go away, since the function might be called from the * biodone context. */ static void swapgeom_release(struct g_consumer *cp, struct swdevt *sp) { mtx_assert(&sw_dev_mtx, MA_OWNED); cp->index--; if (cp->index == 0) { if (g_post_event(swapgeom_close_ev, cp, M_NOWAIT, NULL) == 0) sp->sw_id = NULL; } } static void swapgeom_done(struct bio *bp2) { struct swdevt *sp; struct buf *bp; struct g_consumer *cp; bp = bp2->bio_caller2; cp = bp2->bio_from; bp->b_ioflags = bp2->bio_flags; if (bp2->bio_error) bp->b_ioflags |= BIO_ERROR; bp->b_resid = bp->b_bcount - bp2->bio_completed; bp->b_error = bp2->bio_error; bufdone(bp); sp = bp2->bio_caller1; mtx_lock(&sw_dev_mtx); swapgeom_release(cp, sp); mtx_unlock(&sw_dev_mtx); g_destroy_bio(bp2); } static void swapgeom_strategy(struct buf *bp, struct swdevt *sp) { struct bio *bio; struct g_consumer *cp; mtx_lock(&sw_dev_mtx); cp = sp->sw_id; if (cp == NULL) { mtx_unlock(&sw_dev_mtx); bp->b_error = ENXIO; bp->b_ioflags |= BIO_ERROR; bufdone(bp); return; } swapgeom_acquire(cp); mtx_unlock(&sw_dev_mtx); if (bp->b_iocmd == BIO_WRITE) bio = g_new_bio(); else bio = g_alloc_bio(); if (bio == NULL) { mtx_lock(&sw_dev_mtx); swapgeom_release(cp, sp); mtx_unlock(&sw_dev_mtx); bp->b_error = ENOMEM; bp->b_ioflags |= BIO_ERROR; bufdone(bp); return; } bio->bio_caller1 = sp; bio->bio_caller2 = bp; bio->bio_cmd = bp->b_iocmd; bio->bio_offset = (bp->b_blkno - sp->sw_first) * PAGE_SIZE; bio->bio_length = bp->b_bcount; bio->bio_done = swapgeom_done; if (!buf_mapped(bp)) { bio->bio_ma = bp->b_pages; bio->bio_data = unmapped_buf; bio->bio_ma_offset = (vm_offset_t)bp->b_offset & PAGE_MASK; bio->bio_ma_n = bp->b_npages; bio->bio_flags |= BIO_UNMAPPED; } else { bio->bio_data = bp->b_data; bio->bio_ma = NULL; } g_io_request(bio, cp); return; } static void swapgeom_orphan(struct g_consumer *cp) { struct swdevt *sp; int destroy; mtx_lock(&sw_dev_mtx); TAILQ_FOREACH(sp, &swtailq, sw_list) { if (sp->sw_id == cp) { sp->sw_flags |= SW_CLOSING; break; } } /* * Drop reference we were created with. Do directly since we're in a * special context where we don't have to queue the call to * swapgeom_close_ev(). */ cp->index--; destroy = ((sp != NULL) && (cp->index == 0)); if (destroy) sp->sw_id = NULL; mtx_unlock(&sw_dev_mtx); if (destroy) swapgeom_close_ev(cp, 0); } static void swapgeom_close(struct thread *td, struct swdevt *sw) { struct g_consumer *cp; mtx_lock(&sw_dev_mtx); cp = sw->sw_id; sw->sw_id = NULL; mtx_unlock(&sw_dev_mtx); /* * swapgeom_close() may be called from the biodone context, * where we cannot perform topology changes. Delegate the * work to the events thread. */ if (cp != NULL) g_waitfor_event(swapgeom_close_ev, cp, M_WAITOK, NULL); } static int swapongeom_locked(struct cdev *dev, struct vnode *vp) { struct g_provider *pp; struct g_consumer *cp; static struct g_geom *gp; struct swdevt *sp; u_long nblks; int error; pp = g_dev_getprovider(dev); if (pp == NULL) return (ENODEV); mtx_lock(&sw_dev_mtx); TAILQ_FOREACH(sp, &swtailq, sw_list) { cp = sp->sw_id; if (cp != NULL && cp->provider == pp) { mtx_unlock(&sw_dev_mtx); return (EBUSY); } } mtx_unlock(&sw_dev_mtx); if (gp == NULL) gp = g_new_geomf(&g_swap_class, "swap"); cp = g_new_consumer(gp); cp->index = 1; /* Number of active I/Os, plus one for being active. */ cp->flags |= G_CF_DIRECT_SEND | G_CF_DIRECT_RECEIVE; g_attach(cp, pp); /* * XXX: Every time you think you can improve the margin for * footshooting, somebody depends on the ability to do so: * savecore(8) wants to write to our swapdev so we cannot * set an exclusive count :-( */ error = g_access(cp, 1, 1, 0); if (error != 0) { g_detach(cp); g_destroy_consumer(cp); return (error); } nblks = pp->mediasize / DEV_BSIZE; swaponsomething(vp, cp, nblks, swapgeom_strategy, swapgeom_close, dev2udev(dev), (pp->flags & G_PF_ACCEPT_UNMAPPED) != 0 ? SW_UNMAPPED : 0); return (0); } static int swapongeom(struct vnode *vp) { int error; vn_lock(vp, LK_EXCLUSIVE | LK_RETRY); if (vp->v_type != VCHR || (vp->v_iflag & VI_DOOMED) != 0) { error = ENOENT; } else { g_topology_lock(); error = swapongeom_locked(vp->v_rdev, vp); g_topology_unlock(); } VOP_UNLOCK(vp, 0); return (error); } /* * VNODE backend * * This is used mainly for network filesystem (read: probably only tested * with NFS) swapfiles. * */ static void swapdev_strategy(struct buf *bp, struct swdevt *sp) { struct vnode *vp2; bp->b_blkno = ctodb(bp->b_blkno - sp->sw_first); vp2 = sp->sw_id; vhold(vp2); if (bp->b_iocmd == BIO_WRITE) { if (bp->b_bufobj) bufobj_wdrop(bp->b_bufobj); bufobj_wref(&vp2->v_bufobj); } if (bp->b_bufobj != &vp2->v_bufobj) bp->b_bufobj = &vp2->v_bufobj; bp->b_vp = vp2; bp->b_iooffset = dbtob(bp->b_blkno); bstrategy(bp); return; } static void swapdev_close(struct thread *td, struct swdevt *sp) { VOP_CLOSE(sp->sw_vp, FREAD | FWRITE, td->td_ucred, td); vrele(sp->sw_vp); } static int swaponvp(struct thread *td, struct vnode *vp, u_long nblks) { struct swdevt *sp; int error; if (nblks == 0) return (ENXIO); mtx_lock(&sw_dev_mtx); TAILQ_FOREACH(sp, &swtailq, sw_list) { if (sp->sw_id == vp) { mtx_unlock(&sw_dev_mtx); return (EBUSY); } } mtx_unlock(&sw_dev_mtx); (void) vn_lock(vp, LK_EXCLUSIVE | LK_RETRY); #ifdef MAC error = mac_system_check_swapon(td->td_ucred, vp); if (error == 0) #endif error = VOP_OPEN(vp, FREAD | FWRITE, td->td_ucred, td, NULL); (void) VOP_UNLOCK(vp, 0); if (error) return (error); swaponsomething(vp, vp, nblks, swapdev_strategy, swapdev_close, NODEV, 0); return (0); } static int sysctl_swap_async_max(SYSCTL_HANDLER_ARGS) { int error, new, n; new = nsw_wcount_async_max; error = sysctl_handle_int(oidp, &new, 0, req); if (error != 0 || req->newptr == NULL) return (error); if (new > nswbuf / 2 || new < 1) return (EINVAL); mtx_lock(&pbuf_mtx); while (nsw_wcount_async_max != new) { /* * Adjust difference. If the current async count is too low, * we will need to sqeeze our update slowly in. Sleep with a * higher priority than getpbuf() to finish faster. */ n = new - nsw_wcount_async_max; if (nsw_wcount_async + n >= 0) { nsw_wcount_async += n; nsw_wcount_async_max += n; wakeup(&nsw_wcount_async); } else { nsw_wcount_async_max -= nsw_wcount_async; nsw_wcount_async = 0; msleep(&nsw_wcount_async, &pbuf_mtx, PSWP, "swpsysctl", 0); } } mtx_unlock(&pbuf_mtx); return (0); } Index: stable/11/sys/vm/vm_param.h =================================================================== --- stable/11/sys/vm/vm_param.h (revision 325821) +++ stable/11/sys/vm/vm_param.h (revision 325822) @@ -1,134 +1,135 @@ /*- * Copyright (c) 1991, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * The Mach Operating System project at Carnegie-Mellon University. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)vm_param.h 8.1 (Berkeley) 6/11/93 * * * Copyright (c) 1987, 1990 Carnegie-Mellon University. * All rights reserved. * * Authors: Avadis Tevanian, Jr., Michael Wayne Young * * Permission to use, copy, modify and distribute this software and * its documentation is hereby granted, provided that both the copyright * notice and this permission notice appear in all copies of the * software, derivative works or modified versions, and any portions * thereof, and that both notices appear in supporting documentation. * * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. * * Carnegie Mellon requests users of this software to return to * * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU * School of Computer Science * Carnegie Mellon University * Pittsburgh PA 15213-3890 * * any improvements or extensions that they make and grant Carnegie the * rights to redistribute these changes. * * $FreeBSD$ */ /* * Machine independent virtual memory parameters. */ #ifndef _VM_PARAM_ #define _VM_PARAM_ #include /* * CTL_VM identifiers */ #define VM_TOTAL 1 /* struct vmtotal */ #define VM_METER VM_TOTAL/* deprecated, use VM_TOTAL */ #define VM_LOADAVG 2 /* struct loadavg */ #define VM_V_FREE_MIN 3 /* vm_cnt.v_free_min */ #define VM_V_FREE_TARGET 4 /* vm_cnt.v_free_target */ #define VM_V_FREE_RESERVED 5 /* vm_cnt.v_free_reserved */ #define VM_V_INACTIVE_TARGET 6 /* vm_cnt.v_inactive_target */ #define VM_OBSOLETE_7 7 /* unused, formerly v_cache_min */ #define VM_OBSOLETE_8 8 /* unused, formerly v_cache_max */ #define VM_V_PAGEOUT_FREE_MIN 9 /* vm_cnt.v_pageout_free_min */ #define VM_OBSOLETE_10 10 /* pageout algorithm */ #define VM_SWAPPING_ENABLED 11 /* swapping enabled */ -#define VM_MAXID 12 /* number of valid vm ids */ +#define VM_OVERCOMMIT 12 /* vm.overcommit */ +#define VM_MAXID 13 /* number of valid vm ids */ /* * Structure for swap device statistics */ #define XSWDEV_VERSION 1 struct xswdev { u_int xsw_version; dev_t xsw_dev; int xsw_flags; int xsw_nblks; int xsw_used; }; /* * Return values from the VM routines. */ #define KERN_SUCCESS 0 #define KERN_INVALID_ADDRESS 1 #define KERN_PROTECTION_FAILURE 2 #define KERN_NO_SPACE 3 #define KERN_INVALID_ARGUMENT 4 #define KERN_FAILURE 5 #define KERN_RESOURCE_SHORTAGE 6 #define KERN_NOT_RECEIVER 7 #define KERN_NO_ACCESS 8 #ifndef PA_LOCK_COUNT #ifdef SMP #define PA_LOCK_COUNT 32 #else #define PA_LOCK_COUNT 1 #endif /* !SMP */ #endif /* !PA_LOCK_COUNT */ #ifndef ASSEMBLER #ifdef _KERNEL #define num_pages(x) \ ((vm_offset_t)((((vm_offset_t)(x)) + PAGE_MASK) >> PAGE_SHIFT)) extern unsigned long maxtsiz; extern unsigned long dfldsiz; extern unsigned long maxdsiz; extern unsigned long dflssiz; extern unsigned long maxssiz; extern unsigned long sgrowsiz; #endif /* _KERNEL */ #endif /* ASSEMBLER */ #endif /* _VM_PARAM_ */ Index: stable/11 =================================================================== --- stable/11 (revision 325821) +++ stable/11 (revision 325822) Property changes on: stable/11 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r324857