Index: projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd.kshlib
===================================================================
--- projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd.kshlib	(revision 323935)
+++ projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd.kshlib	(revision 323936)
@@ -1,186 +1,187 @@
 #!/usr/local/bin/ksh93 -p
 #
 # CDDL HEADER START
 #
 # The contents of this file are subject to the terms of the
 # Common Development and Distribution License (the "License").
 # You may not use this file except in compliance with the License.
 #
 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 # or http://www.opensolaris.org/os/licensing.
 # See the License for the specific language governing permissions
 # and limitations under the License.
 #
 # When distributing Covered Code, include this CDDL HEADER in each
 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 # If applicable, add the following below this CDDL HEADER, with the
 # fields enclosed by brackets "[]" replaced with your own identifying
 # information: Portions Copyright [yyyy] [name of copyright owner]
 #
 # CDDL HEADER END
 #
 
 #
 # Copyright 2013 Spectra Logic.  All rights reserved.
 # Use is subject to license terms.
 #
 
 # Common routines used by multiple zfsd tests
 
 function wait_for_disk_to_reappear
 {
 	typeset -i timeout=$1
 	typeset EXPANDER=$2
 	typeset PHY=$3
 
 	for ((; $timeout > 0; timeout=$timeout-1)); do
 		find_disk_by_phy $EXPANDER $PHY
 		[ -n "$FOUNDDISK" -a -e "/dev/$FOUNDDISK" ] && return
 		$SLEEP 1
 	done
 	log_fail "ERROR: Disk at ${EXPANDER}:${PHY} never reappeared"
 }
 
 function wait_for_pool_dev_state_change
 {
 	typeset -i timeout=$1
 	typeset disk=$2
 	typeset state=$3
 
 	log_note "Waiting up to $timeout seconds for $disk to become $state ..."
 	for ((; $timeout > 0; timeout=$timeout-1)); do
 		check_state $TESTPOOL "$disk" "$state"
 		[ $? -eq 0 ] && return
 		$SLEEP 1
 	done
 	log_must $ZPOOL status $TESTPOOL
 	log_fail "ERROR: Disk $disk not marked as $state in $TESTPOOL"
 }
 
 function wait_for_pool_removal
 {
 	typeset -i timeout=$1
 	wait_for_pool_dev_state_change $timeout $REMOVAL_DISK "REMOVED|UNAVAIL"
 }
 
 function wait_until_scrubbed
 {
 	typeset pool=$1
 
 	while is_pool_scrubbing $pool; do
 		log_note "$pool still scrubbing..."
 		$SLEEP 1
 	done
 }
 
 function corrupt_pool_vdev
 {
 	typeset pool=$1
 	typeset vdev=$2
 	typeset file=$3
 
 	# do some IO on the pool
 	log_must $DD if=/dev/zero of=$file bs=1024k count=128
+	$FSYNC $file
+
 	# scribble on the underlying file to corrupt the vdev
 	log_must $DD if=/dev/urandom of=$vdev bs=1024k count=64 conv=notrunc
 
 	# Scrub the pool to detect the corruption
-	$SYNC
 	log_must $ZPOOL scrub $pool
 	wait_until_scrubbed $pool
 
 	# ZFSD can take up to 60 seconds to degrade an array in response to
 	# errors (though it's usually faster).  
 	wait_for_pool_dev_state_change 60 $vdev DEGRADED
 }
 
 #
 # do_autoreplace
 # Common code that walks through an autoreplace scenario
 # Does not verify the final behavior
 #
 # $1	spare disk name.  Empty if no spare
 #
 function do_autoreplace
 {
 	typeset SPARE_DISK=$1
 
 	# Remove a vdev by disabling its SAS phy
 	find_verify_sas_disk $REMOVAL_DISK
 	log_note "Disabling \"$REMOVAL_DISK\" on expander $EXPANDER phy $PHY"
 	disable_sas_disk $EXPANDER $PHY
 
 	# Check to make sure the disk is gone
 	log_mustnot camcontrol inquiry $REMOVAL_DISK
 
 	# Check to make sure ZFS sees the disk as removed
 	wait_for_pool_removal 30
 
 	if [ -n "$SPARE_DISK" ]; then
 		# Verify that the spare activates
 		for ((timeout=0; $timeout<10; timeout=$timeout+1)); do
 			check_state $TESTPOOL $SPARE_DISK "ONLINE" && break
 			$SLEEP 6
 		done
 		zpool status $TESTPOOL
 		log_must check_state $TESTPOOL "$SPARE_DISK" "ONLINE"
 
 		wait_until_resilvered
 	fi
 
 	# Export the pool
 	# This is to prevent REMOVAL_DISK from being added to the pool when
 	# we reenable its phy
 	log_must $ZPOOL export $TESTPOOL
 
 	# Reenable the missing dev's SAS phy
 	log_note "Reenabling phy on expander $EXPANDER phy $PHY"
 	enable_sas_disk $EXPANDER $PHY
 	rescan_disks $EXPANDER
 	wait_for_disk_to_reappear 30 $EXPANDER $PHY
 
 	# Erase the missing dev's ZFS label
 	log_must $ZPOOL labelclear -f $( find_disks $FOUNDDISK )
 
 	# Disable the missing dev's SAS phy again
 	find_verify_sas_disk $FOUNDDISK
 	log_note "Disabling \"$FOUNDDISK\" on expander $EXPANDER phy $PHY"
 	disable_sas_disk $EXPANDER $PHY
 
 	# Check to make sure the disk is gone
 	log_mustnot camcontrol inquiry $REMOVAL_DISK
 
 	# Import the pool
 	log_must $ZPOOL import $TESTPOOL
 	# Wait 5 seconds before enabling the phy so zfsd.log will be easier
 	# to interpret
 	$SLEEP 5
 
 	# Reenable the missing dev's SAS phy
 	log_note "Reenabling phy on expander $EXPANDER phy $PHY"
 	enable_sas_disk $EXPANDER $PHY
 	rescan_disks $EXPANDER
 	wait_for_disk_to_reappear 30 $EXPANDER $PHY
 }
 
 function autoreplace_cleanup
 {
 	destroy_pool $TESTPOOL
 
 	# See if the phy has been disabled, and try to re-enable it if possible.
 	if [ -n "$REMOVAL_DISK" -a -n "$EXPANDER" -a -n "$PHY" ]; then
 		log_note "Renabling ${EXPANDER}:${PHY} for disk ${REMOVAL_DISK}"
 		enable_sas_disk $EXPANDER $PHY
 		rescan_disks $EXPANDER
 
 		# For debugging purposes, log the partial output of
 		# camcontrol to see if the disk actually came back.
 		out=$(camcontrol smpphylist ${EXPANDER} | ${GREP} "^ *${PHY}")
 		log_note "Expander has: ${out}"
 	fi
 
 	[[ -e $TESTDIR ]] && log_must $RM -rf $TESTDIR/*
 
 	partition_cleanup
 	restart_zfsd
 }
Index: projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd_test.sh
===================================================================
--- projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd_test.sh	(revision 323935)
+++ projects/zfsd/head/tests/sys/cddl/zfs/tests/zfsd/zfsd_test.sh	(revision 323936)
@@ -1,558 +1,558 @@
 # CDDL HEADER START
 #
 # The contents of this file are subject to the terms of the
 # Common Development and Distribution License (the "License").
 # You may not use this file except in compliance with the License.
 #
 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 # or http://www.opensolaris.org/os/licensing.
 # See the License for the specific language governing permissions
 # and limitations under the License.
 #
 # When distributing Covered Code, include this CDDL HEADER in each
 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 # If applicable, add the following below this CDDL HEADER, with the
 # fields enclosed by brackets "[]" replaced with your own identifying
 # information: Portions Copyright [yyyy] [name of copyright owner]
 #
 # CDDL HEADER END
 #
 
 #
 # Copyright 2012,2013 Spectra Logic.  All rights reserved.
 # Use is subject to license terms.
 #
 
 
 atf_test_case zfsd_fault_001_pos cleanup
 zfsd_fault_001_pos_head()
 {
 	atf_set "descr" "ZFS will fault a vdev that produces IO errors"
 	atf_set "require.progs"  zfs zpool zfsd
 	atf_set "timeout" 300
 }
 zfsd_fault_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	verify_disk_count "$DISKS" 2
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_fault_001_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_fault_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case zfsd_degrade_001_pos cleanup
 zfsd_degrade_001_pos_head()
 {
 	atf_set "descr" "ZFS will degrade a vdev that produces checksum errors"
 	atf_set "require.progs"  zpool zfsd
-	atf_set "timeout" 300
+	atf_set "timeout" 600
 }
 zfsd_degrade_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	verify_disk_count "$DISKS" 2
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_degrade_001_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_degrade_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_degrade_002_pos cleanup
 zfsd_degrade_002_pos_head()
 {
 	atf_set "descr" "ZFS will degrade a spare that produces checksum errors"
 	atf_set "require.progs"  zpool zfsd
-	atf_set "timeout" 300
+	atf_set "timeout" 600
 }
 zfsd_degrade_002_pos_body()
 {
 	atf_expect_fail "https://www.illumos.org/issues/8614 Checksum errors on a mirrored child of a raidz are incorrectly accounted"
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_degrade_002_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_degrade_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case zfsd_hotspare_001_pos cleanup
 zfsd_hotspare_001_pos_head()
 {
 	atf_set "descr" "An active, damaged spare will be replaced by an available spare"
 	atf_set "require.progs"  zpool zfsd
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_001_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_hotspare_002_pos cleanup
 zfsd_hotspare_002_pos_head()
 {
 	atf_set "descr" "If a vdev becomes degraded, the spare will be activated."
 	atf_set "require.progs"  zpool zfsd zinject
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_002_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_002_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case zfsd_hotspare_003_pos cleanup
 zfsd_hotspare_003_pos_head()
 {
 	atf_set "descr" "A faulted vdev will be replaced by an available spare"
 	atf_set "require.progs"  zpool zfsd zinject
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_003_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_003_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_003_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_hotspare_004_pos cleanup
 zfsd_hotspare_004_pos_head()
 {
 	atf_set "descr" "Removing a disk from a pool results in the spare activating"
 	atf_set "require.progs"  zpool camcontrol zfsd
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_004_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_004_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_004_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_hotspare_005_pos cleanup
 zfsd_hotspare_005_pos_head()
 {
 	atf_set "descr" "A spare that is added to a degraded pool will be activated"
 	atf_set "require.progs"  zpool zfsd zinject
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_005_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_005_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_005_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_hotspare_006_pos cleanup
 zfsd_hotspare_006_pos_head()
 {
 	atf_set "descr" "zfsd will replace two vdevs that fail simultaneously"
 	atf_set "require.progs"  zpool zfsd zinject
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_006_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_006_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_006_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_hotspare_007_pos cleanup
 zfsd_hotspare_007_pos_head()
 {
 	atf_set "descr" "zfsd will swap failed drives at startup"
 	atf_set "require.progs"  zpool camcontrol zfsd
 	atf_set "timeout" 3600
 }
 zfsd_hotspare_007_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_hotspare_007_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_hotspare_007_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_autoreplace_001_neg cleanup
 zfsd_autoreplace_001_neg_head()
 {
 	atf_set "descr" "A pool without autoreplace set will not replace by physical path"
 	atf_set "require.progs"  zpool camcontrol zfsd
 	atf_set "timeout" 3600
 }
 zfsd_autoreplace_001_neg_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_autoreplace_001_neg.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_autoreplace_001_neg_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_autoreplace_002_pos cleanup
 zfsd_autoreplace_002_pos_head()
 {
 	atf_set "descr" "A pool with autoreplace set will replace by physical path"
 	atf_set "require.progs"  zpool camcontrol zfsd
 	atf_set "timeout" 3600
 }
 zfsd_autoreplace_002_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_autoreplace_002_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_autoreplace_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_autoreplace_003_pos cleanup
 zfsd_autoreplace_003_pos_head()
 {
 	atf_set "descr" "A pool with autoreplace set will replace by physical path even if a spare is active"
 	atf_set "require.progs"  zpool camcontrol zfsd
 	atf_set "timeout" 3600
 }
 zfsd_autoreplace_003_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/hotspare_setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_autoreplace_003_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_autoreplace_003_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/hotspare_cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_replace_001_pos cleanup
 zfsd_replace_001_pos_head()
 {
 	atf_set "descr" "ZFSD will automatically replace a SAS disk that dissapears and reappears in the same location, with the same devname"
 	atf_set "require.progs"  zpool camcontrol zfsd zfs
 }
 zfsd_replace_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	verify_disk_count "$DISKS" 2
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_replace_001_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_replace_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 atf_test_case zfsd_replace_002_pos cleanup
 zfsd_replace_002_pos_head()
 {
 	atf_set "descr" "A pool can come back online after all disks have dissapeared and reappeared"
 	atf_set "require.progs"  zpool camcontrol zfsd zfs
 }
 zfsd_replace_002_pos_body()
 {
 	atf_expect_fail "ZFS hangs when an array becomes critical"
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	verify_disk_count "$DISKS" 2
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_replace_002_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_replace_002_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_replace_003_pos cleanup
 zfsd_replace_003_pos_head()
 {
 	atf_set "descr" "ZFSD will correctly replace disks that dissapear and reappear with different devnames"
 	atf_set "require.progs"  zpool camcontrol zfsd zfs
 }
 zfsd_replace_003_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	verify_disk_count "$DISKS" 3
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_replace_003_pos.ksh
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_replace_003_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/zfsd.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 atf_test_case zfsd_import_001_pos cleanup
 zfsd_import_001_pos_head()
 {
 	atf_set "descr" "If a removed drive gets reinserted while the pool is exported, it will detach its spare when imported."
 	atf_set "require.progs"  zfsd zpool
 	atf_set "timeout" 3600
 }
 zfsd_import_001_pos_body()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	verify_disk_count "$DISKS" 5
 	ksh93 $(atf_get_srcdir)/setup.ksh || atf_fail "Setup failed"
 	ksh93 $(atf_get_srcdir)/zfsd_import_001_pos.ksh || atf_fail "Testcase failed"
 	if [[ $? != 0 ]]; then
 		save_artifacts
 		atf_fail "Testcase failed"
 	fi
 }
 zfsd_import_001_pos_cleanup()
 {
 	. $(atf_get_srcdir)/../../include/default.cfg
 	. $(atf_get_srcdir)/../hotspare/hotspare.kshlib
 	. $(atf_get_srcdir)/../hotspare/hotspare.cfg
 
 	ksh93 $(atf_get_srcdir)/cleanup.ksh || atf_fail "Cleanup failed"
 }
 
 
 
 
 atf_init_test_cases()
 {
 	atf_add_test_case zfsd_fault_001_pos
 	atf_add_test_case zfsd_degrade_001_pos
 	atf_add_test_case zfsd_degrade_002_pos
 	atf_add_test_case zfsd_hotspare_001_pos
 	atf_add_test_case zfsd_hotspare_002_pos
 	atf_add_test_case zfsd_hotspare_003_pos
 	atf_add_test_case zfsd_hotspare_004_pos
 	atf_add_test_case zfsd_hotspare_005_pos
 	atf_add_test_case zfsd_hotspare_006_pos
 	atf_add_test_case zfsd_hotspare_007_pos
 	atf_add_test_case zfsd_autoreplace_001_neg
 	atf_add_test_case zfsd_autoreplace_002_pos
 	atf_add_test_case zfsd_autoreplace_003_pos
 	atf_add_test_case zfsd_replace_001_pos
 	atf_add_test_case zfsd_replace_002_pos
 	atf_add_test_case zfsd_replace_003_pos
 	atf_add_test_case zfsd_import_001_pos
 }
 
 save_artifacts()
 {
 	# If ARTIFACTS_DIR is defined, save test artifacts for
 	# post-mortem analysis
 	if [[ -n $ARTIFACTS_DIR ]]; then
 		TC_ARTIFACTS_DIR=${ARTIFACTS_DIR}/sys/cddl/zfs/tests/zfsd/$(atf_get ident)
 		mkdir -p $TC_ARTIFACTS_DIR
 		cp -a /var/log/zfsd.log* $TC_ARTIFACTS_DIR
 		bzip2 $TC_ARTIFACTS_DIR/zfsd.log
 	fi
 }