Index: head/sys/dev/ppc/ppc.c =================================================================== --- head/sys/dev/ppc/ppc.c (revision 323711) +++ head/sys/dev/ppc/ppc.c (revision 323712) @@ -1,2003 +1,2004 @@ /*- * Copyright (c) 1997-2000 Nicolas Souchu * Copyright (c) 2001 Alcove - Nicolas Souchu * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_ppc.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __i386__ #include #include #include #endif #include #include #include #include #include "ppbus_if.h" static void ppcintr(void *arg); #define IO_LPTSIZE_EXTENDED 8 /* "Extended" LPT controllers */ #define IO_LPTSIZE_NORMAL 4 /* "Normal" LPT controllers */ #define LOG_PPC(function, ppc, string) \ if (bootverbose) printf("%s: %s\n", function, string) #define DEVTOSOFTC(dev) ((struct ppc_data *)device_get_softc(dev)) /* * We use critical enter/exit for the simple config locking needed to * detect the devices. We just want to make sure that both of our writes * happen without someone else also writing to those config registers. Since * we just do this at startup, Giant keeps multiple threads from executing, * and critical_enter() then is all that's needed to keep us from being preempted * during the critical sequences with the hardware. * * Note: this doesn't prevent multiple threads from putting the chips into * config mode, but since we only do that to detect the type at startup the * extra overhead isn't needed since Giant protects us from multiple entry * and no other code changes these registers. */ #define PPC_CONFIG_LOCK(ppc) critical_enter() #define PPC_CONFIG_UNLOCK(ppc) critical_exit() devclass_t ppc_devclass; const char ppc_driver_name[] = "ppc"; static char *ppc_models[] = { "SMC-like", "SMC FDC37C665GT", "SMC FDC37C666GT", "PC87332", "PC87306", "82091AA", "Generic", "W83877F", "W83877AF", "Winbond", "PC87334", "SMC FDC37C935", "PC87303", 0 }; /* list of available modes */ static char *ppc_avms[] = { "COMPATIBLE", "NIBBLE-only", "PS2-only", "PS2/NIBBLE", "EPP-only", "EPP/NIBBLE", "EPP/PS2", "EPP/PS2/NIBBLE", "ECP-only", "ECP/NIBBLE", "ECP/PS2", "ECP/PS2/NIBBLE", "ECP/EPP", "ECP/EPP/NIBBLE", "ECP/EPP/PS2", "ECP/EPP/PS2/NIBBLE", 0 }; /* list of current executing modes * Note that few modes do not actually exist. */ static char *ppc_modes[] = { "COMPATIBLE", "NIBBLE", "PS/2", "PS/2", "EPP", "EPP", "EPP", "EPP", "ECP", "ECP", "ECP+PS2", "ECP+PS2", "ECP+EPP", "ECP+EPP", "ECP+EPP", "ECP+EPP", 0 }; static char *ppc_epp_protocol[] = { " (EPP 1.9)", " (EPP 1.7)", 0 }; #ifdef __i386__ /* * BIOS printer list - used by BIOS probe. */ #define BIOS_PPC_PORTS 0x408 #define BIOS_PORTS (short *)(KERNBASE+BIOS_PPC_PORTS) #define BIOS_MAX_PPC 4 #endif /* * ppc_ecp_sync() XXX */ int ppc_ecp_sync(device_t dev) { int i, r; struct ppc_data *ppc = DEVTOSOFTC(dev); PPC_ASSERT_LOCKED(ppc); if (!(ppc->ppc_avm & PPB_ECP) && !(ppc->ppc_dtm & PPB_ECP)) return 0; r = r_ecr(ppc); if ((r & 0xe0) != PPC_ECR_EPP) return 0; for (i = 0; i < 100; i++) { r = r_ecr(ppc); if (r & 0x1) return 0; DELAY(100); } device_printf(dev, "ECP sync failed as data still present in FIFO.\n"); return 0; } /* * ppc_detect_fifo() * * Detect parallel port FIFO */ static int ppc_detect_fifo(struct ppc_data *ppc) { char ecr_sav; char ctr_sav, ctr, cc; short i; /* save registers */ ecr_sav = r_ecr(ppc); ctr_sav = r_ctr(ppc); /* enter ECP configuration mode, no interrupt, no DMA */ w_ecr(ppc, 0xf4); /* read PWord size - transfers in FIFO mode must be PWord aligned */ ppc->ppc_pword = (r_cnfgA(ppc) & PPC_PWORD_MASK); /* XXX 16 and 32 bits implementations not supported */ if (ppc->ppc_pword != PPC_PWORD_8) { LOG_PPC(__func__, ppc, "PWord not supported"); goto error; } w_ecr(ppc, 0x34); /* byte mode, no interrupt, no DMA */ ctr = r_ctr(ppc); w_ctr(ppc, ctr | PCD); /* set direction to 1 */ /* enter ECP test mode, no interrupt, no DMA */ w_ecr(ppc, 0xd4); /* flush the FIFO */ for (i=0; i<1024; i++) { if (r_ecr(ppc) & PPC_FIFO_EMPTY) break; cc = r_fifo(ppc); } if (i >= 1024) { LOG_PPC(__func__, ppc, "can't flush FIFO"); goto error; } /* enable interrupts, no DMA */ w_ecr(ppc, 0xd0); /* determine readIntrThreshold * fill the FIFO until serviceIntr is set */ for (i=0; i<1024; i++) { w_fifo(ppc, (char)i); if (!ppc->ppc_rthr && (r_ecr(ppc) & PPC_SERVICE_INTR)) { /* readThreshold reached */ ppc->ppc_rthr = i+1; } if (r_ecr(ppc) & PPC_FIFO_FULL) { ppc->ppc_fifo = i+1; break; } } if (i >= 1024) { LOG_PPC(__func__, ppc, "can't fill FIFO"); goto error; } w_ecr(ppc, 0xd4); /* test mode, no interrupt, no DMA */ w_ctr(ppc, ctr & ~PCD); /* set direction to 0 */ w_ecr(ppc, 0xd0); /* enable interrupts */ /* determine writeIntrThreshold * empty the FIFO until serviceIntr is set */ for (i=ppc->ppc_fifo; i>0; i--) { if (r_fifo(ppc) != (char)(ppc->ppc_fifo-i)) { LOG_PPC(__func__, ppc, "invalid data in FIFO"); goto error; } if (r_ecr(ppc) & PPC_SERVICE_INTR) { /* writeIntrThreshold reached */ ppc->ppc_wthr = ppc->ppc_fifo - i+1; } /* if FIFO empty before the last byte, error */ if (i>1 && (r_ecr(ppc) & PPC_FIFO_EMPTY)) { LOG_PPC(__func__, ppc, "data lost in FIFO"); goto error; } } /* FIFO must be empty after the last byte */ if (!(r_ecr(ppc) & PPC_FIFO_EMPTY)) { LOG_PPC(__func__, ppc, "can't empty the FIFO"); goto error; } w_ctr(ppc, ctr_sav); w_ecr(ppc, ecr_sav); return (0); error: w_ctr(ppc, ctr_sav); w_ecr(ppc, ecr_sav); return (EINVAL); } static int ppc_detect_port(struct ppc_data *ppc) { w_ctr(ppc, 0x0c); /* To avoid missing PS2 ports */ w_dtr(ppc, 0xaa); if (r_dtr(ppc) != 0xaa) return (0); return (1); } /* * EPP timeout, according to the PC87332 manual * Semantics of clearing EPP timeout bit. * PC87332 - reading SPP_STR does it... * SMC - write 1 to EPP timeout bit XXX * Others - (?) write 0 to EPP timeout bit */ static void ppc_reset_epp_timeout(struct ppc_data *ppc) { char r; r = r_str(ppc); w_str(ppc, r | 0x1); w_str(ppc, r & 0xfe); return; } static int ppc_check_epp_timeout(struct ppc_data *ppc) { ppc_reset_epp_timeout(ppc); return (!(r_str(ppc) & TIMEOUT)); } /* * Configure current operating mode */ static int ppc_generic_setmode(struct ppc_data *ppc, int mode) { u_char ecr = 0; /* check if mode is available */ if (mode && !(ppc->ppc_avm & mode)) return (EINVAL); /* if ECP mode, configure ecr register */ if ((ppc->ppc_avm & PPB_ECP) || (ppc->ppc_dtm & PPB_ECP)) { /* return to byte mode (keeping direction bit), * no interrupt, no DMA to be able to change to * ECP */ w_ecr(ppc, PPC_ECR_RESET); ecr = PPC_DISABLE_INTR; if (mode & PPB_EPP) return (EINVAL); else if (mode & PPB_ECP) /* select ECP mode */ ecr |= PPC_ECR_ECP; else if (mode & PPB_PS2) /* select PS2 mode with ECP */ ecr |= PPC_ECR_PS2; else /* select COMPATIBLE/NIBBLE mode */ ecr |= PPC_ECR_STD; w_ecr(ppc, ecr); } ppc->ppc_mode = mode; return (0); } /* * The ppc driver is free to choose options like FIFO or DMA * if ECP mode is available. * * The 'RAW' option allows the upper drivers to force the ppc mode * even with FIFO, DMA available. */ static int ppc_smclike_setmode(struct ppc_data *ppc, int mode) { u_char ecr = 0; /* check if mode is available */ if (mode && !(ppc->ppc_avm & mode)) return (EINVAL); /* if ECP mode, configure ecr register */ if ((ppc->ppc_avm & PPB_ECP) || (ppc->ppc_dtm & PPB_ECP)) { /* return to byte mode (keeping direction bit), * no interrupt, no DMA to be able to change to * ECP or EPP mode */ w_ecr(ppc, PPC_ECR_RESET); ecr = PPC_DISABLE_INTR; if (mode & PPB_EPP) /* select EPP mode */ ecr |= PPC_ECR_EPP; else if (mode & PPB_ECP) /* select ECP mode */ ecr |= PPC_ECR_ECP; else if (mode & PPB_PS2) /* select PS2 mode with ECP */ ecr |= PPC_ECR_PS2; else /* select COMPATIBLE/NIBBLE mode */ ecr |= PPC_ECR_STD; w_ecr(ppc, ecr); } ppc->ppc_mode = mode; return (0); } #ifdef PPC_PROBE_CHIPSET /* * ppc_pc873xx_detect * * Probe for a Natsemi PC873xx-family part. * * References in this function are to the National Semiconductor * PC87332 datasheet TL/C/11930, May 1995 revision. */ static int pc873xx_basetab[] = {0x0398, 0x026e, 0x015c, 0x002e, 0}; static int pc873xx_porttab[] = {0x0378, 0x03bc, 0x0278, 0}; static int pc873xx_irqtab[] = {5, 7, 5, 0}; static int pc873xx_regstab[] = { PC873_FER, PC873_FAR, PC873_PTR, PC873_FCR, PC873_PCR, PC873_PMC, PC873_TUP, PC873_SID, PC873_PNP0, PC873_PNP1, PC873_LPTBA, -1 }; static char *pc873xx_rnametab[] = { "FER", "FAR", "PTR", "FCR", "PCR", "PMC", "TUP", "SID", "PNP0", "PNP1", "LPTBA", NULL }; static int ppc_pc873xx_detect(struct ppc_data *ppc, int chipset_mode) /* XXX mode never forced */ { static int index = 0; int idport, irq; int ptr, pcr, val, i; while ((idport = pc873xx_basetab[index++])) { /* XXX should check first to see if this location is already claimed */ /* * Pull the 873xx through the power-on ID cycle (2.2,1.). * We can't use this to locate the chip as it may already have * been used by the BIOS. */ (void)inb(idport); (void)inb(idport); (void)inb(idport); (void)inb(idport); /* * Read the SID byte. Possible values are : * * 01010xxx PC87334 * 0001xxxx PC87332 * 01110xxx PC87306 * 00110xxx PC87303 */ outb(idport, PC873_SID); val = inb(idport + 1); if ((val & 0xf0) == 0x10) { ppc->ppc_model = NS_PC87332; } else if ((val & 0xf8) == 0x70) { ppc->ppc_model = NS_PC87306; } else if ((val & 0xf8) == 0x50) { ppc->ppc_model = NS_PC87334; } else if ((val & 0xf8) == 0x40) { /* Should be 0x30 by the documentation, but probing yielded 0x40... */ ppc->ppc_model = NS_PC87303; } else { if (bootverbose && (val != 0xff)) printf("PC873xx probe at 0x%x got unknown ID 0x%x\n", idport, val); continue ; /* not recognised */ } /* print registers */ if (bootverbose) { printf("PC873xx"); for (i=0; pc873xx_regstab[i] != -1; i++) { outb(idport, pc873xx_regstab[i]); printf(" %s=0x%x", pc873xx_rnametab[i], inb(idport + 1) & 0xff); } printf("\n"); } /* * We think we have one. Is it enabled and where we want it to be? */ outb(idport, PC873_FER); val = inb(idport + 1); if (!(val & PC873_PPENABLE)) { if (bootverbose) printf("PC873xx parallel port disabled\n"); continue; } outb(idport, PC873_FAR); val = inb(idport + 1); /* XXX we should create a driver instance for every port found */ if (pc873xx_porttab[val & 0x3] != ppc->ppc_base) { /* First try to change the port address to that requested... */ switch (ppc->ppc_base) { case 0x378: val &= 0xfc; break; case 0x3bc: val &= 0xfd; break; case 0x278: val &= 0xfe; break; default: val &= 0xfd; break; } outb(idport, PC873_FAR); outb(idport + 1, val); outb(idport + 1, val); /* Check for success by reading back the value we supposedly wrote and comparing...*/ outb(idport, PC873_FAR); val = inb(idport + 1) & 0x3; /* If we fail, report the failure... */ if (pc873xx_porttab[val] != ppc->ppc_base) { if (bootverbose) printf("PC873xx at 0x%x not for driver at port 0x%x\n", pc873xx_porttab[val], ppc->ppc_base); } continue; } outb(idport, PC873_PTR); ptr = inb(idport + 1); /* get irq settings */ if (ppc->ppc_base == 0x378) irq = (ptr & PC873_LPTBIRQ7) ? 7 : 5; else irq = pc873xx_irqtab[val]; if (bootverbose) printf("PC873xx irq %d at 0x%x\n", irq, ppc->ppc_base); /* * Check if irq settings are correct */ if (irq != ppc->ppc_irq) { /* * If the chipset is not locked and base address is 0x378, * we have another chance */ if (ppc->ppc_base == 0x378 && !(ptr & PC873_CFGLOCK)) { if (ppc->ppc_irq == 7) { outb(idport + 1, (ptr | PC873_LPTBIRQ7)); outb(idport + 1, (ptr | PC873_LPTBIRQ7)); } else { outb(idport + 1, (ptr & ~PC873_LPTBIRQ7)); outb(idport + 1, (ptr & ~PC873_LPTBIRQ7)); } if (bootverbose) printf("PC873xx irq set to %d\n", ppc->ppc_irq); } else { if (bootverbose) printf("PC873xx sorry, can't change irq setting\n"); } } else { if (bootverbose) printf("PC873xx irq settings are correct\n"); } outb(idport, PC873_PCR); pcr = inb(idport + 1); if ((ptr & PC873_CFGLOCK) || !chipset_mode) { if (bootverbose) printf("PC873xx %s", (ptr & PC873_CFGLOCK)?"locked":"unlocked"); ppc->ppc_avm |= PPB_NIBBLE; if (bootverbose) printf(", NIBBLE"); if (pcr & PC873_EPPEN) { ppc->ppc_avm |= PPB_EPP; if (bootverbose) printf(", EPP"); if (pcr & PC873_EPP19) ppc->ppc_epp = EPP_1_9; else ppc->ppc_epp = EPP_1_7; if ((ppc->ppc_model == NS_PC87332) && bootverbose) { outb(idport, PC873_PTR); ptr = inb(idport + 1); if (ptr & PC873_EPPRDIR) printf(", Regular mode"); else printf(", Automatic mode"); } } else if (pcr & PC873_ECPEN) { ppc->ppc_avm |= PPB_ECP; if (bootverbose) printf(", ECP"); if (pcr & PC873_ECPCLK) { /* XXX */ ppc->ppc_avm |= PPB_PS2; if (bootverbose) printf(", PS/2"); } } else { outb(idport, PC873_PTR); ptr = inb(idport + 1); if (ptr & PC873_EXTENDED) { ppc->ppc_avm |= PPB_SPP; if (bootverbose) printf(", SPP"); } } } else { if (bootverbose) printf("PC873xx unlocked"); if (chipset_mode & PPB_ECP) { if ((chipset_mode & PPB_EPP) && bootverbose) printf(", ECP+EPP not supported"); pcr &= ~PC873_EPPEN; pcr |= (PC873_ECPEN | PC873_ECPCLK); /* XXX */ outb(idport + 1, pcr); outb(idport + 1, pcr); if (bootverbose) printf(", ECP"); } else if (chipset_mode & PPB_EPP) { pcr &= ~(PC873_ECPEN | PC873_ECPCLK); pcr |= (PC873_EPPEN | PC873_EPP19); outb(idport + 1, pcr); outb(idport + 1, pcr); ppc->ppc_epp = EPP_1_9; /* XXX */ if (bootverbose) printf(", EPP1.9"); /* enable automatic direction turnover */ if (ppc->ppc_model == NS_PC87332) { outb(idport, PC873_PTR); ptr = inb(idport + 1); ptr &= ~PC873_EPPRDIR; outb(idport + 1, ptr); outb(idport + 1, ptr); if (bootverbose) printf(", Automatic mode"); } } else { pcr &= ~(PC873_ECPEN | PC873_ECPCLK | PC873_EPPEN); outb(idport + 1, pcr); outb(idport + 1, pcr); /* configure extended bit in PTR */ outb(idport, PC873_PTR); ptr = inb(idport + 1); if (chipset_mode & PPB_PS2) { ptr |= PC873_EXTENDED; if (bootverbose) printf(", PS/2"); } else { /* default to NIBBLE mode */ ptr &= ~PC873_EXTENDED; if (bootverbose) printf(", NIBBLE"); } outb(idport + 1, ptr); outb(idport + 1, ptr); } ppc->ppc_avm = chipset_mode; } if (bootverbose) printf("\n"); ppc->ppc_type = PPC_TYPE_GENERIC; ppc_generic_setmode(ppc, chipset_mode); return(chipset_mode); } return(-1); } /* * ppc_smc37c66xgt_detect * * SMC FDC37C66xGT configuration. */ static int ppc_smc37c66xgt_detect(struct ppc_data *ppc, int chipset_mode) { int i; u_char r; int type = -1; int csr = SMC66x_CSR; /* initial value is 0x3F0 */ int port_address[] = { -1 /* disabled */ , 0x3bc, 0x378, 0x278 }; #define cio csr+1 /* config IO port is either 0x3F1 or 0x371 */ /* * Detection: enter configuration mode and read CRD register. */ PPC_CONFIG_LOCK(ppc); outb(csr, SMC665_iCODE); outb(csr, SMC665_iCODE); PPC_CONFIG_UNLOCK(ppc); outb(csr, 0xd); if (inb(cio) == 0x65) { type = SMC_37C665GT; goto config; } for (i = 0; i < 2; i++) { PPC_CONFIG_LOCK(ppc); outb(csr, SMC666_iCODE); outb(csr, SMC666_iCODE); PPC_CONFIG_UNLOCK(ppc); outb(csr, 0xd); if (inb(cio) == 0x66) { type = SMC_37C666GT; break; } /* Another chance, CSR may be hard-configured to be at 0x370 */ csr = SMC666_CSR; } config: /* * If chipset not found, do not continue. */ if (type == -1) { outb(csr, 0xaa); /* end config mode */ return (-1); } /* select CR1 */ outb(csr, 0x1); /* read the port's address: bits 0 and 1 of CR1 */ r = inb(cio) & SMC_CR1_ADDR; if (port_address[(int)r] != ppc->ppc_base) { outb(csr, 0xaa); /* end config mode */ return (-1); } ppc->ppc_model = type; /* * CR1 and CR4 registers bits 3 and 0/1 for mode configuration * If SPP mode is detected, try to set ECP+EPP mode */ if (bootverbose) { outb(csr, 0x1); device_printf(ppc->ppc_dev, "SMC registers CR1=0x%x", inb(cio) & 0xff); outb(csr, 0x4); printf(" CR4=0x%x", inb(cio) & 0xff); } /* select CR1 */ outb(csr, 0x1); if (!chipset_mode) { /* autodetect mode */ /* 666GT is ~certainly~ hardwired to an extended ECP+EPP mode */ if (type == SMC_37C666GT) { ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; if (bootverbose) printf(" configuration hardwired, supposing " \ "ECP+EPP SPP"); } else if ((inb(cio) & SMC_CR1_MODE) == 0) { /* already in extended parallel port mode, read CR4 */ outb(csr, 0x4); r = (inb(cio) & SMC_CR4_EMODE); switch (r) { case SMC_SPP: ppc->ppc_avm |= PPB_SPP; if (bootverbose) printf(" SPP"); break; case SMC_EPPSPP: ppc->ppc_avm |= PPB_EPP | PPB_SPP; if (bootverbose) printf(" EPP SPP"); break; case SMC_ECP: ppc->ppc_avm |= PPB_ECP | PPB_SPP; if (bootverbose) printf(" ECP SPP"); break; case SMC_ECPEPP: ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; if (bootverbose) printf(" ECP+EPP SPP"); break; } } else { /* not an extended port mode */ ppc->ppc_avm |= PPB_SPP; if (bootverbose) printf(" SPP"); } } else { /* mode forced */ ppc->ppc_avm = chipset_mode; /* 666GT is ~certainly~ hardwired to an extended ECP+EPP mode */ if (type == SMC_37C666GT) goto end_detect; r = inb(cio); if ((chipset_mode & (PPB_ECP | PPB_EPP)) == 0) { /* do not use ECP when the mode is not forced to */ outb(cio, r | SMC_CR1_MODE); if (bootverbose) printf(" SPP"); } else { /* an extended mode is selected */ outb(cio, r & ~SMC_CR1_MODE); /* read CR4 register and reset mode field */ outb(csr, 0x4); r = inb(cio) & ~SMC_CR4_EMODE; if (chipset_mode & PPB_ECP) { if (chipset_mode & PPB_EPP) { outb(cio, r | SMC_ECPEPP); if (bootverbose) printf(" ECP+EPP"); } else { outb(cio, r | SMC_ECP); if (bootverbose) printf(" ECP"); } } else { /* PPB_EPP is set */ outb(cio, r | SMC_EPPSPP); if (bootverbose) printf(" EPP SPP"); } } ppc->ppc_avm = chipset_mode; } /* set FIFO threshold to 16 */ if (ppc->ppc_avm & PPB_ECP) { /* select CRA */ outb(csr, 0xa); outb(cio, 16); } end_detect: if (bootverbose) printf ("\n"); if (ppc->ppc_avm & PPB_EPP) { /* select CR4 */ outb(csr, 0x4); r = inb(cio); /* * Set the EPP protocol... * Low=EPP 1.9 (1284 standard) and High=EPP 1.7 */ if (ppc->ppc_epp == EPP_1_9) outb(cio, (r & ~SMC_CR4_EPPTYPE)); else outb(cio, (r | SMC_CR4_EPPTYPE)); } outb(csr, 0xaa); /* end config mode */ ppc->ppc_type = PPC_TYPE_SMCLIKE; ppc_smclike_setmode(ppc, chipset_mode); return (chipset_mode); } /* * SMC FDC37C935 configuration * Found on many Alpha machines */ static int ppc_smc37c935_detect(struct ppc_data *ppc, int chipset_mode) { int type = -1; PPC_CONFIG_LOCK(ppc); outb(SMC935_CFG, 0x55); /* enter config mode */ outb(SMC935_CFG, 0x55); PPC_CONFIG_UNLOCK(ppc); outb(SMC935_IND, SMC935_ID); /* check device id */ if (inb(SMC935_DAT) == 0x2) type = SMC_37C935; if (type == -1) { outb(SMC935_CFG, 0xaa); /* exit config mode */ return (-1); } ppc->ppc_model = type; outb(SMC935_IND, SMC935_LOGDEV); /* select parallel port, */ outb(SMC935_DAT, 3); /* which is logical device 3 */ /* set io port base */ outb(SMC935_IND, SMC935_PORTHI); outb(SMC935_DAT, (u_char)((ppc->ppc_base & 0xff00) >> 8)); outb(SMC935_IND, SMC935_PORTLO); outb(SMC935_DAT, (u_char)(ppc->ppc_base & 0xff)); if (!chipset_mode) ppc->ppc_avm = PPB_COMPATIBLE; /* default mode */ else { ppc->ppc_avm = chipset_mode; outb(SMC935_IND, SMC935_PPMODE); outb(SMC935_DAT, SMC935_CENT); /* start in compatible mode */ /* SPP + EPP or just plain SPP */ if (chipset_mode & (PPB_SPP)) { if (chipset_mode & PPB_EPP) { if (ppc->ppc_epp == EPP_1_9) { outb(SMC935_IND, SMC935_PPMODE); outb(SMC935_DAT, SMC935_EPP19SPP); } if (ppc->ppc_epp == EPP_1_7) { outb(SMC935_IND, SMC935_PPMODE); outb(SMC935_DAT, SMC935_EPP17SPP); } } else { outb(SMC935_IND, SMC935_PPMODE); outb(SMC935_DAT, SMC935_SPP); } } /* ECP + EPP or just plain ECP */ if (chipset_mode & PPB_ECP) { if (chipset_mode & PPB_EPP) { if (ppc->ppc_epp == EPP_1_9) { outb(SMC935_IND, SMC935_PPMODE); outb(SMC935_DAT, SMC935_ECPEPP19); } if (ppc->ppc_epp == EPP_1_7) { outb(SMC935_IND, SMC935_PPMODE); outb(SMC935_DAT, SMC935_ECPEPP17); } } else { outb(SMC935_IND, SMC935_PPMODE); outb(SMC935_DAT, SMC935_ECP); } } } outb(SMC935_CFG, 0xaa); /* exit config mode */ ppc->ppc_type = PPC_TYPE_SMCLIKE; ppc_smclike_setmode(ppc, chipset_mode); return (chipset_mode); } /* * Winbond W83877F stuff * * EFER: extended function enable register * EFIR: extended function index register * EFDR: extended function data register */ #define efir ((efer == 0x250) ? 0x251 : 0x3f0) #define efdr ((efer == 0x250) ? 0x252 : 0x3f1) static int w83877f_efers[] = { 0x250, 0x3f0, 0x3f0, 0x250 }; static int w83877f_keys[] = { 0x89, 0x86, 0x87, 0x88 }; static int w83877f_keyiter[] = { 1, 2, 2, 1 }; static int w83877f_hefs[] = { WINB_HEFERE, WINB_HEFRAS, WINB_HEFERE | WINB_HEFRAS, 0 }; static int ppc_w83877f_detect(struct ppc_data *ppc, int chipset_mode) { int i, j, efer; unsigned char r, hefere, hefras; for (i = 0; i < 4; i ++) { /* first try to enable configuration registers */ efer = w83877f_efers[i]; /* write the key to the EFER */ for (j = 0; j < w83877f_keyiter[i]; j ++) outb (efer, w83877f_keys[i]); /* then check HEFERE and HEFRAS bits */ outb (efir, 0x0c); hefere = inb(efdr) & WINB_HEFERE; outb (efir, 0x16); hefras = inb(efdr) & WINB_HEFRAS; /* * HEFRAS HEFERE * 0 1 write 89h to 250h (power-on default) * 1 0 write 86h twice to 3f0h * 1 1 write 87h twice to 3f0h * 0 0 write 88h to 250h */ if ((hefere | hefras) == w83877f_hefs[i]) goto found; } return (-1); /* failed */ found: /* check base port address - read from CR23 */ outb(efir, 0x23); if (ppc->ppc_base != inb(efdr) * 4) /* 4 bytes boundaries */ return (-1); /* read CHIP ID from CR9/bits0-3 */ outb(efir, 0x9); switch (inb(efdr) & WINB_CHIPID) { case WINB_W83877F_ID: ppc->ppc_model = WINB_W83877F; break; case WINB_W83877AF_ID: ppc->ppc_model = WINB_W83877AF; break; default: ppc->ppc_model = WINB_UNKNOWN; } if (bootverbose) { /* dump of registers */ device_printf(ppc->ppc_dev, "0x%x - ", w83877f_keys[i]); for (i = 0; i <= 0xd; i ++) { outb(efir, i); printf("0x%x ", inb(efdr)); } for (i = 0x10; i <= 0x17; i ++) { outb(efir, i); printf("0x%x ", inb(efdr)); } outb(efir, 0x1e); printf("0x%x ", inb(efdr)); for (i = 0x20; i <= 0x29; i ++) { outb(efir, i); printf("0x%x ", inb(efdr)); } printf("\n"); } ppc->ppc_type = PPC_TYPE_GENERIC; if (!chipset_mode) { /* autodetect mode */ /* select CR0 */ outb(efir, 0x0); r = inb(efdr) & (WINB_PRTMODS0 | WINB_PRTMODS1); /* select CR9 */ outb(efir, 0x9); r |= (inb(efdr) & WINB_PRTMODS2); switch (r) { case WINB_W83757: if (bootverbose) device_printf(ppc->ppc_dev, "W83757 compatible mode\n"); return (-1); /* generic or SMC-like */ case WINB_EXTFDC: case WINB_EXTADP: case WINB_EXT2FDD: case WINB_JOYSTICK: if (bootverbose) device_printf(ppc->ppc_dev, "not in parallel port mode\n"); return (-1); case (WINB_PARALLEL | WINB_EPP_SPP): ppc->ppc_avm |= PPB_EPP | PPB_SPP; if (bootverbose) device_printf(ppc->ppc_dev, "EPP SPP\n"); break; case (WINB_PARALLEL | WINB_ECP): ppc->ppc_avm |= PPB_ECP | PPB_SPP; if (bootverbose) device_printf(ppc->ppc_dev, "ECP SPP\n"); break; case (WINB_PARALLEL | WINB_ECP_EPP): ppc->ppc_avm |= PPB_ECP | PPB_EPP | PPB_SPP; ppc->ppc_type = PPC_TYPE_SMCLIKE; if (bootverbose) device_printf(ppc->ppc_dev, "ECP+EPP SPP\n"); break; default: printf("%s: unknown case (0x%x)!\n", __func__, r); } } else { /* mode forced */ /* select CR9 and set PRTMODS2 bit */ outb(efir, 0x9); outb(efdr, inb(efdr) & ~WINB_PRTMODS2); /* select CR0 and reset PRTMODSx bits */ outb(efir, 0x0); outb(efdr, inb(efdr) & ~(WINB_PRTMODS0 | WINB_PRTMODS1)); if (chipset_mode & PPB_ECP) { if (chipset_mode & PPB_EPP) { outb(efdr, inb(efdr) | WINB_ECP_EPP); if (bootverbose) device_printf(ppc->ppc_dev, "ECP+EPP\n"); ppc->ppc_type = PPC_TYPE_SMCLIKE; } else { outb(efdr, inb(efdr) | WINB_ECP); if (bootverbose) device_printf(ppc->ppc_dev, "ECP\n"); } } else { /* select EPP_SPP otherwise */ outb(efdr, inb(efdr) | WINB_EPP_SPP); if (bootverbose) device_printf(ppc->ppc_dev, "EPP SPP\n"); } ppc->ppc_avm = chipset_mode; } /* exit configuration mode */ outb(efer, 0xaa); switch (ppc->ppc_type) { case PPC_TYPE_SMCLIKE: ppc_smclike_setmode(ppc, chipset_mode); break; default: ppc_generic_setmode(ppc, chipset_mode); break; } return (chipset_mode); } #endif /* * ppc_generic_detect */ static int ppc_generic_detect(struct ppc_data *ppc, int chipset_mode) { /* default to generic */ ppc->ppc_type = PPC_TYPE_GENERIC; if (bootverbose) device_printf(ppc->ppc_dev, "SPP"); /* first, check for ECP */ w_ecr(ppc, PPC_ECR_PS2); if ((r_ecr(ppc) & 0xe0) == PPC_ECR_PS2) { ppc->ppc_dtm |= PPB_ECP | PPB_SPP; if (bootverbose) printf(" ECP "); /* search for SMC style ECP+EPP mode */ w_ecr(ppc, PPC_ECR_EPP); } /* try to reset EPP timeout bit */ if (ppc_check_epp_timeout(ppc)) { ppc->ppc_dtm |= PPB_EPP; if (ppc->ppc_dtm & PPB_ECP) { /* SMC like chipset found */ ppc->ppc_model = SMC_LIKE; ppc->ppc_type = PPC_TYPE_SMCLIKE; if (bootverbose) printf(" ECP+EPP"); } else { if (bootverbose) printf(" EPP"); } } else { /* restore to standard mode */ w_ecr(ppc, PPC_ECR_STD); } /* XXX try to detect NIBBLE and PS2 modes */ ppc->ppc_dtm |= PPB_NIBBLE; if (chipset_mode) ppc->ppc_avm = chipset_mode; else ppc->ppc_avm = ppc->ppc_dtm; if (bootverbose) printf("\n"); switch (ppc->ppc_type) { case PPC_TYPE_SMCLIKE: ppc_smclike_setmode(ppc, chipset_mode); break; default: ppc_generic_setmode(ppc, chipset_mode); break; } return (chipset_mode); } /* * ppc_detect() * * mode is the mode suggested at boot */ static int ppc_detect(struct ppc_data *ppc, int chipset_mode) { #ifdef PPC_PROBE_CHIPSET int i, mode; /* list of supported chipsets */ int (*chipset_detect[])(struct ppc_data *, int) = { ppc_pc873xx_detect, ppc_smc37c66xgt_detect, ppc_w83877f_detect, ppc_smc37c935_detect, ppc_generic_detect, NULL }; #endif /* if can't find the port and mode not forced return error */ if (!ppc_detect_port(ppc) && chipset_mode == 0) return (EIO); /* failed, port not present */ /* assume centronics compatible mode is supported */ ppc->ppc_avm = PPB_COMPATIBLE; #ifdef PPC_PROBE_CHIPSET /* we have to differenciate available chipset modes, * chipset running modes and IEEE-1284 operating modes * * after detection, the port must support running in compatible mode */ if (ppc->ppc_flags & 0x40) { if (bootverbose) printf("ppc: chipset forced to generic\n"); #endif ppc->ppc_mode = ppc_generic_detect(ppc, chipset_mode); #ifdef PPC_PROBE_CHIPSET } else { for (i=0; chipset_detect[i] != NULL; i++) { if ((mode = chipset_detect[i](ppc, chipset_mode)) != -1) { ppc->ppc_mode = mode; break; } } } #endif /* configure/detect ECP FIFO */ if ((ppc->ppc_avm & PPB_ECP) && !(ppc->ppc_flags & 0x80)) ppc_detect_fifo(ppc); return (0); } /* * ppc_exec_microseq() * * Execute a microsequence. * Microsequence mechanism is supposed to handle fast I/O operations. */ int ppc_exec_microseq(device_t dev, struct ppb_microseq **p_msq) { struct ppc_data *ppc = DEVTOSOFTC(dev); struct ppb_microseq *mi; char cc, *p; int i, iter, len; int error; int reg; char mask; int accum = 0; char *ptr = NULL; struct ppb_microseq *stack = NULL; /* microsequence registers are equivalent to PC-like port registers */ #define r_reg(reg,ppc) (bus_read_1((ppc)->res_ioport, reg)) #define w_reg(reg, ppc, byte) (bus_write_1((ppc)->res_ioport, reg, byte)) #define INCR_PC (mi ++) /* increment program counter */ PPC_ASSERT_LOCKED(ppc); mi = *p_msq; for (;;) { switch (mi->opcode) { case MS_OP_RSET: cc = r_reg(mi->arg[0].i, ppc); cc &= (char)mi->arg[2].i; /* clear mask */ cc |= (char)mi->arg[1].i; /* assert mask */ w_reg(mi->arg[0].i, ppc, cc); INCR_PC; break; case MS_OP_RASSERT_P: reg = mi->arg[1].i; ptr = ppc->ppc_ptr; if ((len = mi->arg[0].i) == MS_ACCUM) { accum = ppc->ppc_accum; for (; accum; accum--) w_reg(reg, ppc, *ptr++); ppc->ppc_accum = accum; } else for (i=0; ippc_ptr = ptr; INCR_PC; break; case MS_OP_RFETCH_P: reg = mi->arg[1].i; mask = (char)mi->arg[2].i; ptr = ppc->ppc_ptr; if ((len = mi->arg[0].i) == MS_ACCUM) { accum = ppc->ppc_accum; for (; accum; accum--) *ptr++ = r_reg(reg, ppc) & mask; ppc->ppc_accum = accum; } else for (i=0; ippc_ptr = ptr; INCR_PC; break; case MS_OP_RFETCH: *((char *) mi->arg[2].p) = r_reg(mi->arg[0].i, ppc) & (char)mi->arg[1].i; INCR_PC; break; case MS_OP_RASSERT: case MS_OP_DELAY: /* let's suppose the next instr. is the same */ prefetch: for (;mi->opcode == MS_OP_RASSERT; INCR_PC) w_reg(mi->arg[0].i, ppc, (char)mi->arg[1].i); if (mi->opcode == MS_OP_DELAY) { DELAY(mi->arg[0].i); INCR_PC; goto prefetch; } break; case MS_OP_ADELAY: if (mi->arg[0].i) { PPC_UNLOCK(ppc); pause("ppbdelay", mi->arg[0].i * (hz/1000)); PPC_LOCK(ppc); } INCR_PC; break; case MS_OP_TRIG: reg = mi->arg[0].i; iter = mi->arg[1].i; p = (char *)mi->arg[2].p; /* XXX delay limited to 255 us */ for (i=0; ippc_accum = mi->arg[0].i; INCR_PC; break; case MS_OP_DBRA: if (--ppc->ppc_accum > 0) mi += mi->arg[0].i; INCR_PC; break; case MS_OP_BRSET: cc = r_str(ppc); if ((cc & (char)mi->arg[0].i) == (char)mi->arg[0].i) mi += mi->arg[1].i; INCR_PC; break; case MS_OP_BRCLEAR: cc = r_str(ppc); if ((cc & (char)mi->arg[0].i) == 0) mi += mi->arg[1].i; INCR_PC; break; case MS_OP_BRSTAT: cc = r_str(ppc); if ((cc & ((char)mi->arg[0].i | (char)mi->arg[1].i)) == (char)mi->arg[0].i) mi += mi->arg[2].i; INCR_PC; break; case MS_OP_C_CALL: /* * If the C call returns !0 then end the microseq. * The current state of ptr is passed to the C function */ if ((error = mi->arg[0].f(mi->arg[1].p, ppc->ppc_ptr))) return (error); INCR_PC; break; case MS_OP_PTR: ppc->ppc_ptr = (char *)mi->arg[0].p; INCR_PC; break; case MS_OP_CALL: if (stack) panic("%s: too much calls", __func__); if (mi->arg[0].p) { /* store the state of the actual * microsequence */ stack = mi; /* jump to the new microsequence */ mi = (struct ppb_microseq *)mi->arg[0].p; } else INCR_PC; break; case MS_OP_SUBRET: /* retrieve microseq and pc state before the call */ mi = stack; /* reset the stack */ stack = NULL; /* XXX return code */ INCR_PC; break; case MS_OP_PUT: case MS_OP_GET: case MS_OP_RET: /* can't return to ppb level during the execution * of a submicrosequence */ if (stack) panic("%s: can't return to ppb level", __func__); /* update pc for ppb level of execution */ *p_msq = mi; /* return to ppb level of execution */ return (0); default: panic("%s: unknown microsequence opcode 0x%x", __func__, mi->opcode); } } /* unreached */ } static void ppcintr(void *arg) { struct ppc_data *ppc = arg; u_char ctr, ecr, str; /* * If we have any child interrupt handlers registered, let * them handle this interrupt. * * XXX: If DMA is in progress should we just complete that w/o * doing this? */ PPC_LOCK(ppc); if (ppc->ppc_intr_hook != NULL && ppc->ppc_intr_hook(ppc->ppc_intr_arg) == 0) { PPC_UNLOCK(ppc); return; } str = r_str(ppc); ctr = r_ctr(ppc); ecr = r_ecr(ppc); #if defined(PPC_DEBUG) && PPC_DEBUG > 1 printf("![%x/%x/%x]", ctr, ecr, str); #endif /* don't use ecp mode with IRQENABLE set */ if (ctr & IRQENABLE) { PPC_UNLOCK(ppc); return; } /* interrupts are generated by nFault signal * only in ECP mode */ if ((str & nFAULT) && (ppc->ppc_mode & PPB_ECP)) { /* check if ppc driver has programmed the * nFault interrupt */ if (ppc->ppc_irqstat & PPC_IRQ_nFAULT) { w_ecr(ppc, ecr | PPC_nFAULT_INTR); ppc->ppc_irqstat &= ~PPC_IRQ_nFAULT; } else { /* shall be handled by underlying layers XXX */ PPC_UNLOCK(ppc); return; } } if (ppc->ppc_irqstat & PPC_IRQ_DMA) { /* disable interrupts (should be done by hardware though) */ w_ecr(ppc, ecr | PPC_SERVICE_INTR); ppc->ppc_irqstat &= ~PPC_IRQ_DMA; ecr = r_ecr(ppc); /* check if DMA completed */ if ((ppc->ppc_avm & PPB_ECP) && (ecr & PPC_ENABLE_DMA)) { #ifdef PPC_DEBUG printf("a"); #endif /* stop DMA */ w_ecr(ppc, ecr & ~PPC_ENABLE_DMA); ecr = r_ecr(ppc); if (ppc->ppc_dmastat == PPC_DMA_STARTED) { #ifdef PPC_DEBUG printf("d"); #endif ppc->ppc_dmadone(ppc); ppc->ppc_dmastat = PPC_DMA_COMPLETE; /* wakeup the waiting process */ wakeup(ppc); } } } else if (ppc->ppc_irqstat & PPC_IRQ_FIFO) { /* classic interrupt I/O */ ppc->ppc_irqstat &= ~PPC_IRQ_FIFO; } PPC_UNLOCK(ppc); return; } int ppc_read(device_t dev, char *buf, int len, int mode) { return (EINVAL); } int ppc_write(device_t dev, char *buf, int len, int how) { return (EINVAL); } int ppc_reset_epp(device_t dev) { struct ppc_data *ppc = DEVTOSOFTC(dev); PPC_ASSERT_LOCKED(ppc); ppc_reset_epp_timeout(ppc); return 0; } int ppc_setmode(device_t dev, int mode) { struct ppc_data *ppc = DEVTOSOFTC(dev); PPC_ASSERT_LOCKED(ppc); switch (ppc->ppc_type) { case PPC_TYPE_SMCLIKE: return (ppc_smclike_setmode(ppc, mode)); break; case PPC_TYPE_GENERIC: default: return (ppc_generic_setmode(ppc, mode)); break; } /* not reached */ return (ENXIO); } int ppc_probe(device_t dev, int rid) { #ifdef __i386__ static short next_bios_ppc = 0; #endif struct ppc_data *ppc; int error; rman_res_t port; /* * Allocate the ppc_data structure. */ ppc = DEVTOSOFTC(dev); bzero(ppc, sizeof(struct ppc_data)); ppc->rid_ioport = rid; /* retrieve ISA parameters */ error = bus_get_resource(dev, SYS_RES_IOPORT, rid, &port, NULL); #ifdef __i386__ /* * If port not specified, use bios list. */ if (error) { if ((next_bios_ppc < BIOS_MAX_PPC) && (*(BIOS_PORTS + next_bios_ppc) != 0)) { port = *(BIOS_PORTS + next_bios_ppc++); if (bootverbose) device_printf(dev, "parallel port found at 0x%jx\n", port); } else { device_printf(dev, "parallel port not found.\n"); return (ENXIO); } bus_set_resource(dev, SYS_RES_IOPORT, rid, port, IO_LPTSIZE_EXTENDED); } #endif /* IO port is mandatory */ /* Try "extended" IO port range...*/ ppc->res_ioport = bus_alloc_resource_anywhere(dev, SYS_RES_IOPORT, &ppc->rid_ioport, IO_LPTSIZE_EXTENDED, RF_ACTIVE); if (ppc->res_ioport != 0) { if (bootverbose) device_printf(dev, "using extended I/O port range\n"); } else { /* Failed? If so, then try the "normal" IO port range... */ ppc->res_ioport = bus_alloc_resource_anywhere(dev, SYS_RES_IOPORT, &ppc->rid_ioport, IO_LPTSIZE_NORMAL, RF_ACTIVE); if (ppc->res_ioport != 0) { if (bootverbose) device_printf(dev, "using normal I/O port range\n"); } else { - device_printf(dev, "cannot reserve I/O port range\n"); + if (bootverbose) + device_printf(dev, "cannot reserve I/O port range\n"); goto error; } } ppc->ppc_base = rman_get_start(ppc->res_ioport); ppc->ppc_flags = device_get_flags(dev); if (!(ppc->ppc_flags & 0x20)) { ppc->res_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &ppc->rid_irq, RF_SHAREABLE); ppc->res_drq = bus_alloc_resource_any(dev, SYS_RES_DRQ, &ppc->rid_drq, RF_ACTIVE); } if (ppc->res_irq) ppc->ppc_irq = rman_get_start(ppc->res_irq); if (ppc->res_drq) ppc->ppc_dmachan = rman_get_start(ppc->res_drq); ppc->ppc_dev = dev; ppc->ppc_model = GENERIC; ppc->ppc_mode = PPB_COMPATIBLE; ppc->ppc_epp = (ppc->ppc_flags & 0x10) >> 4; ppc->ppc_type = PPC_TYPE_GENERIC; /* * Try to detect the chipset and its mode. */ if (ppc_detect(ppc, ppc->ppc_flags & 0xf)) goto error; return (0); error: if (ppc->res_irq != 0) { bus_release_resource(dev, SYS_RES_IRQ, ppc->rid_irq, ppc->res_irq); } if (ppc->res_ioport != 0) { bus_release_resource(dev, SYS_RES_IOPORT, ppc->rid_ioport, ppc->res_ioport); } if (ppc->res_drq != 0) { bus_release_resource(dev, SYS_RES_DRQ, ppc->rid_drq, ppc->res_drq); } return (ENXIO); } int ppc_attach(device_t dev) { struct ppc_data *ppc = DEVTOSOFTC(dev); int error; mtx_init(&ppc->ppc_lock, device_get_nameunit(dev), "ppc", MTX_DEF); device_printf(dev, "%s chipset (%s) in %s mode%s\n", ppc_models[ppc->ppc_model], ppc_avms[ppc->ppc_avm], ppc_modes[ppc->ppc_mode], (PPB_IS_EPP(ppc->ppc_mode)) ? ppc_epp_protocol[ppc->ppc_epp] : ""); if (ppc->ppc_fifo) device_printf(dev, "FIFO with %d/%d/%d bytes threshold\n", ppc->ppc_fifo, ppc->ppc_wthr, ppc->ppc_rthr); if (ppc->res_irq) { /* default to the tty mask for registration */ /* XXX */ error = bus_setup_intr(dev, ppc->res_irq, INTR_TYPE_TTY | INTR_MPSAFE, NULL, ppcintr, ppc, &ppc->intr_cookie); if (error) { device_printf(dev, "failed to register interrupt handler: %d\n", error); mtx_destroy(&ppc->ppc_lock); return (error); } } /* add ppbus as a child of this isa to parallel bridge */ ppc->ppbus = device_add_child(dev, "ppbus", -1); /* * Probe the ppbus and attach devices found. */ device_probe_and_attach(ppc->ppbus); return (0); } int ppc_detach(device_t dev) { struct ppc_data *ppc = DEVTOSOFTC(dev); if (ppc->res_irq == 0) { return (ENXIO); } /* detach & delete all children */ device_delete_children(dev); if (ppc->res_irq != 0) { bus_teardown_intr(dev, ppc->res_irq, ppc->intr_cookie); bus_release_resource(dev, SYS_RES_IRQ, ppc->rid_irq, ppc->res_irq); } if (ppc->res_ioport != 0) { bus_release_resource(dev, SYS_RES_IOPORT, ppc->rid_ioport, ppc->res_ioport); } if (ppc->res_drq != 0) { bus_release_resource(dev, SYS_RES_DRQ, ppc->rid_drq, ppc->res_drq); } mtx_destroy(&ppc->ppc_lock); return (0); } u_char ppc_io(device_t ppcdev, int iop, u_char *addr, int cnt, u_char byte) { struct ppc_data *ppc = DEVTOSOFTC(ppcdev); PPC_ASSERT_LOCKED(ppc); switch (iop) { case PPB_OUTSB_EPP: bus_write_multi_1(ppc->res_ioport, PPC_EPP_DATA, addr, cnt); break; case PPB_OUTSW_EPP: bus_write_multi_2(ppc->res_ioport, PPC_EPP_DATA, (u_int16_t *)addr, cnt); break; case PPB_OUTSL_EPP: bus_write_multi_4(ppc->res_ioport, PPC_EPP_DATA, (u_int32_t *)addr, cnt); break; case PPB_INSB_EPP: bus_read_multi_1(ppc->res_ioport, PPC_EPP_DATA, addr, cnt); break; case PPB_INSW_EPP: bus_read_multi_2(ppc->res_ioport, PPC_EPP_DATA, (u_int16_t *)addr, cnt); break; case PPB_INSL_EPP: bus_read_multi_4(ppc->res_ioport, PPC_EPP_DATA, (u_int32_t *)addr, cnt); break; case PPB_RDTR: return (r_dtr(ppc)); case PPB_RSTR: return (r_str(ppc)); case PPB_RCTR: return (r_ctr(ppc)); case PPB_REPP_A: return (r_epp_A(ppc)); case PPB_REPP_D: return (r_epp_D(ppc)); case PPB_RECR: return (r_ecr(ppc)); case PPB_RFIFO: return (r_fifo(ppc)); case PPB_WDTR: w_dtr(ppc, byte); break; case PPB_WSTR: w_str(ppc, byte); break; case PPB_WCTR: w_ctr(ppc, byte); break; case PPB_WEPP_A: w_epp_A(ppc, byte); break; case PPB_WEPP_D: w_epp_D(ppc, byte); break; case PPB_WECR: w_ecr(ppc, byte); break; case PPB_WFIFO: w_fifo(ppc, byte); break; default: panic("%s: unknown I/O operation", __func__); break; } return (0); /* not significative */ } int ppc_read_ivar(device_t bus, device_t dev, int index, uintptr_t *val) { struct ppc_data *ppc = (struct ppc_data *)device_get_softc(bus); switch (index) { case PPC_IVAR_EPP_PROTO: PPC_ASSERT_LOCKED(ppc); *val = (u_long)ppc->ppc_epp; break; case PPC_IVAR_LOCK: *val = (uintptr_t)&ppc->ppc_lock; break; default: return (ENOENT); } return (0); } int ppc_write_ivar(device_t bus, device_t dev, int index, uintptr_t val) { struct ppc_data *ppc = (struct ppc_data *)device_get_softc(bus); switch (index) { case PPC_IVAR_INTR_HANDLER: PPC_ASSERT_LOCKED(ppc); if (dev != ppc->ppbus) return (EINVAL); if (val == 0) { ppc->ppc_intr_hook = NULL; break; } if (ppc->ppc_intr_hook != NULL) return (EBUSY); ppc->ppc_intr_hook = (void *)val; ppc->ppc_intr_arg = device_get_softc(dev); break; default: return (ENOENT); } return (0); } /* * We allow child devices to allocate an IRQ resource at rid 0 for their * interrupt handlers. */ struct resource * ppc_alloc_resource(device_t bus, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct ppc_data *ppc = DEVTOSOFTC(bus); switch (type) { case SYS_RES_IRQ: if (*rid == 0) return (ppc->res_irq); break; } return (NULL); } int ppc_release_resource(device_t bus, device_t child, int type, int rid, struct resource *r) { #ifdef INVARIANTS struct ppc_data *ppc = DEVTOSOFTC(bus); #endif switch (type) { case SYS_RES_IRQ: if (rid == 0) { KASSERT(r == ppc->res_irq, ("ppc child IRQ resource mismatch")); return (0); } break; } return (EINVAL); } MODULE_DEPEND(ppc, ppbus, 1, 1, 1);