Index: stable/10/sys/amd64/amd64/machdep.c =================================================================== --- stable/10/sys/amd64/amd64/machdep.c (revision 322204) +++ stable/10/sys/amd64/amd64/machdep.c (revision 322205) @@ -1,2792 +1,2794 @@ /*- * Copyright (c) 2003 Peter Wemm. * Copyright (c) 1992 Terrence R. Lambert. * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 */ #include __FBSDID("$FreeBSD$"); #include "opt_atalk.h" #include "opt_atpic.h" #include "opt_compat.h" #include "opt_cpu.h" #include "opt_ddb.h" #include "opt_inet.h" #include "opt_ipx.h" #include "opt_isa.h" #include "opt_kstack_pages.h" #include "opt_maxmem.h" #include "opt_mp_watchdog.h" #include "opt_perfmon.h" #include "opt_platform.h" #include "opt_sched.h" #include "opt_kdtrace.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef SMP #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #ifndef KDB #error KDB must be enabled in order for DDB to work! #endif #include #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef PERFMON #include #endif #include #ifdef SMP #include #endif #ifdef FDT #include #endif #ifdef DEV_ATPIC #include #else #include #endif #include #include /* Sanity check for __curthread() */ CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); extern u_int64_t hammer_time(u_int64_t, u_int64_t); #define CS_SECURE(cs) (ISPL(cs) == SEL_UPL) #define EFL_SECURE(ef, oef) ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0) static void cpu_startup(void *); static void get_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpusave, size_t xfpusave_len); static int set_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpustate, size_t xfpustate_len); SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL); /* * The file "conf/ldscript.amd64" defines the symbol "kernphys". Its value is * the physical address at which the kernel is loaded. */ extern char kernphys[]; #ifdef DDB extern vm_offset_t ksym_start, ksym_end; #endif struct msgbuf *msgbufp; /* Intel ICH registers */ #define ICH_PMBASE 0x400 #define ICH_SMI_EN ICH_PMBASE + 0x30 int _udatasel, _ucodesel, _ucode32sel, _ufssel, _ugssel; int cold = 1; long Maxmem = 0; long realmem = 0; /* * The number of PHYSMAP entries must be one less than the number of * PHYSSEG entries because the PHYSMAP entry that spans the largest * physical address that is accessible by ISA DMA is split into two * PHYSSEG entries. */ #define PHYSMAP_SIZE (2 * (VM_PHYSSEG_MAX - 1)) vm_paddr_t phys_avail[PHYSMAP_SIZE + 2]; vm_paddr_t dump_avail[PHYSMAP_SIZE + 2]; /* must be 2 less so 0 0 can signal end of chunks */ #define PHYS_AVAIL_ARRAY_END ((sizeof(phys_avail) / sizeof(phys_avail[0])) - 2) #define DUMP_AVAIL_ARRAY_END ((sizeof(dump_avail) / sizeof(dump_avail[0])) - 2) struct kva_md_info kmi; static struct trapframe proc0_tf; struct region_descriptor r_gdt, r_idt; struct pcpu __pcpu[MAXCPU]; struct mtx icu_lock; struct mem_range_softc mem_range_softc; struct mtx dt_lock; /* lock for GDT and LDT */ void (*vmm_resume_p)(void); static void cpu_startup(dummy) void *dummy; { uintmax_t memsize; char *sysenv; /* * On MacBooks, we need to disallow the legacy USB circuit to * generate an SMI# because this can cause several problems, * namely: incorrect CPU frequency detection and failure to * start the APs. * We do this by disabling a bit in the SMI_EN (SMI Control and * Enable register) of the Intel ICH LPC Interface Bridge. */ sysenv = getenv("smbios.system.product"); if (sysenv != NULL) { if (strncmp(sysenv, "MacBook1,1", 10) == 0 || strncmp(sysenv, "MacBook3,1", 10) == 0 || strncmp(sysenv, "MacBook4,1", 10) == 0 || strncmp(sysenv, "MacBookPro1,1", 13) == 0 || strncmp(sysenv, "MacBookPro1,2", 13) == 0 || strncmp(sysenv, "MacBookPro3,1", 13) == 0 || strncmp(sysenv, "MacBookPro4,1", 13) == 0 || strncmp(sysenv, "Macmini1,1", 10) == 0) { if (bootverbose) printf("Disabling LEGACY_USB_EN bit on " "Intel ICH.\n"); outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8); } freeenv(sysenv); } /* * Good {morning,afternoon,evening,night}. */ startrtclock(); printcpuinfo(); panicifcpuunsupported(); #ifdef PERFMON perfmon_init(); #endif /* * Display physical memory if SMBIOS reports reasonable amount. */ memsize = 0; sysenv = getenv("smbios.memory.enabled"); if (sysenv != NULL) { memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10; freeenv(sysenv); } if (memsize < ptoa((uintmax_t)cnt.v_free_count)) memsize = ptoa((uintmax_t)Maxmem); printf("real memory = %ju (%ju MB)\n", memsize, memsize >> 20); realmem = atop(memsize); /* * Display any holes after the first chunk of extended memory. */ if (bootverbose) { int indx; printf("Physical memory chunk(s):\n"); for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { vm_paddr_t size; size = phys_avail[indx + 1] - phys_avail[indx]; printf( "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", (uintmax_t)phys_avail[indx], (uintmax_t)phys_avail[indx + 1] - 1, (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); } } vm_ksubmap_init(&kmi); printf("avail memory = %ju (%ju MB)\n", ptoa((uintmax_t)cnt.v_free_count), ptoa((uintmax_t)cnt.v_free_count) / 1048576); /* * Set up buffers, so they can be used to read disk labels. */ bufinit(); vm_pager_bufferinit(); cpu_setregs(); } /* * Send an interrupt to process. * * Stack is set up to allow sigcode stored * at top to call routine, followed by call * to sigreturn routine below. After sigreturn * resets the signal mask, the stack, and the * frame pointer, it returns to the user * specified pc, psl. */ void sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) { struct sigframe sf, *sfp; struct pcb *pcb; struct proc *p; struct thread *td; struct sigacts *psp; char *sp; struct trapframe *regs; char *xfpusave; size_t xfpusave_len; int sig; int oonstack; td = curthread; pcb = td->td_pcb; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); sig = ksi->ksi_signo; psp = p->p_sigacts; mtx_assert(&psp->ps_mtx, MA_OWNED); regs = td->td_frame; oonstack = sigonstack(regs->tf_rsp); if (cpu_max_ext_state_size > sizeof(struct savefpu) && use_xsave) { xfpusave_len = cpu_max_ext_state_size - sizeof(struct savefpu); xfpusave = __builtin_alloca(xfpusave_len); } else { xfpusave_len = 0; xfpusave = NULL; } /* Save user context. */ bzero(&sf, sizeof(sf)); sf.sf_uc.uc_sigmask = *mask; sf.sf_uc.uc_stack = td->td_sigstk; sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; bcopy(regs, &sf.sf_uc.uc_mcontext.mc_rdi, sizeof(*regs)); sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext); /* magic */ get_fpcontext(td, &sf.sf_uc.uc_mcontext, xfpusave, xfpusave_len); fpstate_drop(td); sf.sf_uc.uc_mcontext.mc_fsbase = pcb->pcb_fsbase; sf.sf_uc.uc_mcontext.mc_gsbase = pcb->pcb_gsbase; bzero(sf.sf_uc.uc_mcontext.mc_spare, sizeof(sf.sf_uc.uc_mcontext.mc_spare)); bzero(sf.sf_uc.__spare__, sizeof(sf.sf_uc.__spare__)); /* Allocate space for the signal handler context. */ if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && SIGISMEMBER(psp->ps_sigonstack, sig)) { sp = td->td_sigstk.ss_sp + td->td_sigstk.ss_size; #if defined(COMPAT_43) td->td_sigstk.ss_flags |= SS_ONSTACK; #endif } else sp = (char *)regs->tf_rsp - 128; if (xfpusave != NULL) { sp -= xfpusave_len; sp = (char *)((unsigned long)sp & ~0x3Ful); sf.sf_uc.uc_mcontext.mc_xfpustate = (register_t)sp; } sp -= sizeof(struct sigframe); /* Align to 16 bytes. */ sfp = (struct sigframe *)((unsigned long)sp & ~0xFul); /* Build the argument list for the signal handler. */ regs->tf_rdi = sig; /* arg 1 in %rdi */ regs->tf_rdx = (register_t)&sfp->sf_uc; /* arg 3 in %rdx */ bzero(&sf.sf_si, sizeof(sf.sf_si)); if (SIGISMEMBER(psp->ps_siginfo, sig)) { /* Signal handler installed with SA_SIGINFO. */ regs->tf_rsi = (register_t)&sfp->sf_si; /* arg 2 in %rsi */ sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; /* Fill in POSIX parts */ sf.sf_si = ksi->ksi_info; sf.sf_si.si_signo = sig; /* maybe a translated signal */ regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ } else { /* Old FreeBSD-style arguments. */ regs->tf_rsi = ksi->ksi_code; /* arg 2 in %rsi */ regs->tf_rcx = (register_t)ksi->ksi_addr; /* arg 4 in %rcx */ sf.sf_ahu.sf_handler = catcher; } mtx_unlock(&psp->ps_mtx); PROC_UNLOCK(p); /* * Copy the sigframe out to the user's stack. */ if (copyout(&sf, sfp, sizeof(*sfp)) != 0 || (xfpusave != NULL && copyout(xfpusave, (void *)sf.sf_uc.uc_mcontext.mc_xfpustate, xfpusave_len) != 0)) { #ifdef DEBUG printf("process %ld has trashed its stack\n", (long)p->p_pid); #endif PROC_LOCK(p); sigexit(td, SIGILL); } regs->tf_rsp = (long)sfp; regs->tf_rip = p->p_sysent->sv_sigcode_base; regs->tf_rflags &= ~(PSL_T | PSL_D); regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_ss = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _ufssel; regs->tf_gs = _ugssel; regs->tf_flags = TF_HASSEGS; set_pcb_flags(pcb, PCB_FULL_IRET); PROC_LOCK(p); mtx_lock(&psp->ps_mtx); } /* * System call to cleanup state after a signal * has been taken. Reset signal mask and * stack state from context left by sendsig (above). * Return to previous pc and psl as specified by * context left by sendsig. Check carefully to * make sure that the user has not modified the * state to gain improper privileges. * * MPSAFE */ int sys_sigreturn(td, uap) struct thread *td; struct sigreturn_args /* { const struct __ucontext *sigcntxp; } */ *uap; { ucontext_t uc; struct pcb *pcb; struct proc *p; struct trapframe *regs; ucontext_t *ucp; char *xfpustate; size_t xfpustate_len; long rflags; int cs, error, ret; ksiginfo_t ksi; pcb = td->td_pcb; p = td->td_proc; error = copyin(uap->sigcntxp, &uc, sizeof(uc)); if (error != 0) { uprintf("pid %d (%s): sigreturn copyin failed\n", p->p_pid, td->td_name); return (error); } ucp = &uc; if ((ucp->uc_mcontext.mc_flags & ~_MC_FLAG_MASK) != 0) { uprintf("pid %d (%s): sigreturn mc_flags %x\n", p->p_pid, td->td_name, ucp->uc_mcontext.mc_flags); return (EINVAL); } regs = td->td_frame; rflags = ucp->uc_mcontext.mc_rflags; /* * Don't allow users to change privileged or reserved flags. */ if (!EFL_SECURE(rflags, regs->tf_rflags)) { uprintf("pid %d (%s): sigreturn rflags = 0x%lx\n", p->p_pid, td->td_name, rflags); return (EINVAL); } /* * Don't allow users to load a valid privileged %cs. Let the * hardware check for invalid selectors, excess privilege in * other selectors, invalid %eip's and invalid %esp's. */ cs = ucp->uc_mcontext.mc_cs; if (!CS_SECURE(cs)) { uprintf("pid %d (%s): sigreturn cs = 0x%x\n", p->p_pid, td->td_name, cs); ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_trapno = T_PROTFLT; ksi.ksi_addr = (void *)regs->tf_rip; trapsignal(td, &ksi); return (EINVAL); } if ((uc.uc_mcontext.mc_flags & _MC_HASFPXSTATE) != 0) { xfpustate_len = uc.uc_mcontext.mc_xfpustate_len; if (xfpustate_len > cpu_max_ext_state_size - sizeof(struct savefpu)) { uprintf("pid %d (%s): sigreturn xfpusave_len = 0x%zx\n", p->p_pid, td->td_name, xfpustate_len); return (EINVAL); } xfpustate = __builtin_alloca(xfpustate_len); error = copyin((const void *)uc.uc_mcontext.mc_xfpustate, xfpustate, xfpustate_len); if (error != 0) { uprintf( "pid %d (%s): sigreturn copying xfpustate failed\n", p->p_pid, td->td_name); return (error); } } else { xfpustate = NULL; xfpustate_len = 0; } ret = set_fpcontext(td, &ucp->uc_mcontext, xfpustate, xfpustate_len); if (ret != 0) { uprintf("pid %d (%s): sigreturn set_fpcontext err %d\n", p->p_pid, td->td_name, ret); return (ret); } bcopy(&ucp->uc_mcontext.mc_rdi, regs, sizeof(*regs)); pcb->pcb_fsbase = ucp->uc_mcontext.mc_fsbase; pcb->pcb_gsbase = ucp->uc_mcontext.mc_gsbase; #if defined(COMPAT_43) if (ucp->uc_mcontext.mc_onstack & 1) td->td_sigstk.ss_flags |= SS_ONSTACK; else td->td_sigstk.ss_flags &= ~SS_ONSTACK; #endif kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0); set_pcb_flags(pcb, PCB_FULL_IRET); return (EJUSTRETURN); } #ifdef COMPAT_FREEBSD4 int freebsd4_sigreturn(struct thread *td, struct freebsd4_sigreturn_args *uap) { return sys_sigreturn(td, (struct sigreturn_args *)uap); } #endif /* * Machine dependent boot() routine * * I haven't seen anything to put here yet * Possibly some stuff might be grafted back here from boot() */ void cpu_boot(int howto) { } /* * Flush the D-cache for non-DMA I/O so that the I-cache can * be made coherent later. */ void cpu_flush_dcache(void *ptr, size_t len) { /* Not applicable */ } /* Get current clock frequency for the given cpu id. */ int cpu_est_clockrate(int cpu_id, uint64_t *rate) { uint64_t tsc1, tsc2; uint64_t acnt, mcnt, perf; register_t reg; if (pcpu_find(cpu_id) == NULL || rate == NULL) return (EINVAL); /* * If TSC is P-state invariant and APERF/MPERF MSRs do not exist, * DELAY(9) based logic fails. */ if (tsc_is_invariant && !tsc_perf_stat) return (EOPNOTSUPP); #ifdef SMP if (smp_cpus > 1) { /* Schedule ourselves on the indicated cpu. */ thread_lock(curthread); sched_bind(curthread, cpu_id); thread_unlock(curthread); } #endif /* Calibrate by measuring a short delay. */ reg = intr_disable(); if (tsc_is_invariant) { wrmsr(MSR_MPERF, 0); wrmsr(MSR_APERF, 0); tsc1 = rdtsc(); DELAY(1000); mcnt = rdmsr(MSR_MPERF); acnt = rdmsr(MSR_APERF); tsc2 = rdtsc(); intr_restore(reg); perf = 1000 * acnt / mcnt; *rate = (tsc2 - tsc1) * perf; } else { tsc1 = rdtsc(); DELAY(1000); tsc2 = rdtsc(); intr_restore(reg); *rate = (tsc2 - tsc1) * 1000; } #ifdef SMP if (smp_cpus > 1) { thread_lock(curthread); sched_unbind(curthread); thread_unlock(curthread); } #endif return (0); } /* * Shutdown the CPU as much as possible */ void cpu_halt(void) { for (;;) halt(); } void (*cpu_idle_hook)(sbintime_t) = NULL; /* ACPI idle hook. */ static int cpu_ident_amdc1e = 0; /* AMD C1E supported. */ static int idle_mwait = 1; /* Use MONITOR/MWAIT for short idle. */ TUNABLE_INT("machdep.idle_mwait", &idle_mwait); SYSCTL_INT(_machdep, OID_AUTO, idle_mwait, CTLFLAG_RW, &idle_mwait, 0, "Use MONITOR/MWAIT for short idle"); #define STATE_RUNNING 0x0 #define STATE_MWAIT 0x1 #define STATE_SLEEPING 0x2 static void cpu_idle_acpi(sbintime_t sbt) { int *state; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_SLEEPING; /* See comments in cpu_idle_hlt(). */ disable_intr(); if (sched_runnable()) enable_intr(); else if (cpu_idle_hook) cpu_idle_hook(sbt); else __asm __volatile("sti; hlt"); *state = STATE_RUNNING; } static void cpu_idle_hlt(sbintime_t sbt) { int *state; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_SLEEPING; /* * Since we may be in a critical section from cpu_idle(), if * an interrupt fires during that critical section we may have * a pending preemption. If the CPU halts, then that thread * may not execute until a later interrupt awakens the CPU. * To handle this race, check for a runnable thread after * disabling interrupts and immediately return if one is * found. Also, we must absolutely guarentee that hlt is * the next instruction after sti. This ensures that any * interrupt that fires after the call to disable_intr() will * immediately awaken the CPU from hlt. Finally, please note * that on x86 this works fine because of interrupts enabled only * after the instruction following sti takes place, while IF is set * to 1 immediately, allowing hlt instruction to acknowledge the * interrupt. */ disable_intr(); if (sched_runnable()) enable_intr(); else __asm __volatile("sti; hlt"); *state = STATE_RUNNING; } static void cpu_idle_mwait(sbintime_t sbt) { int *state; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_MWAIT; /* See comments in cpu_idle_hlt(). */ disable_intr(); if (sched_runnable()) { enable_intr(); *state = STATE_RUNNING; return; } cpu_monitor(state, 0, 0); if (*state == STATE_MWAIT) __asm __volatile("sti; mwait" : : "a" (MWAIT_C1), "c" (0)); else enable_intr(); *state = STATE_RUNNING; } static void cpu_idle_spin(sbintime_t sbt) { int *state; int i; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_RUNNING; /* * The sched_runnable() call is racy but as long as there is * a loop missing it one time will have just a little impact if any * (and it is much better than missing the check at all). */ for (i = 0; i < 1000; i++) { if (sched_runnable()) return; cpu_spinwait(); } } /* * C1E renders the local APIC timer dead, so we disable it by * reading the Interrupt Pending Message register and clearing * both C1eOnCmpHalt (bit 28) and SmiOnCmpHalt (bit 27). * * Reference: * "BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors" * #32559 revision 3.00+ */ #define MSR_AMDK8_IPM 0xc0010055 #define AMDK8_SMIONCMPHALT (1ULL << 27) #define AMDK8_C1EONCMPHALT (1ULL << 28) #define AMDK8_CMPHALT (AMDK8_SMIONCMPHALT | AMDK8_C1EONCMPHALT) static void cpu_probe_amdc1e(void) { /* * Detect the presence of C1E capability mostly on latest * dual-cores (or future) k8 family. */ if (cpu_vendor_id == CPU_VENDOR_AMD && (cpu_id & 0x00000f00) == 0x00000f00 && (cpu_id & 0x0fff0000) >= 0x00040000) { cpu_ident_amdc1e = 1; } } void (*cpu_idle_fn)(sbintime_t) = cpu_idle_acpi; void cpu_idle(int busy) { uint64_t msr; sbintime_t sbt = -1; CTR2(KTR_SPARE2, "cpu_idle(%d) at %d", busy, curcpu); #ifdef MP_WATCHDOG ap_watchdog(PCPU_GET(cpuid)); #endif /* If we are busy - try to use fast methods. */ if (busy) { if ((cpu_feature2 & CPUID2_MON) && idle_mwait) { cpu_idle_mwait(busy); goto out; } } /* If we have time - switch timers into idle mode. */ if (!busy) { critical_enter(); sbt = cpu_idleclock(); } /* Apply AMD APIC timer C1E workaround. */ if (cpu_ident_amdc1e && cpu_disable_c3_sleep) { msr = rdmsr(MSR_AMDK8_IPM); if (msr & AMDK8_CMPHALT) wrmsr(MSR_AMDK8_IPM, msr & ~AMDK8_CMPHALT); } /* Call main idle method. */ cpu_idle_fn(sbt); /* Switch timers mack into active mode. */ if (!busy) { cpu_activeclock(); critical_exit(); } out: CTR2(KTR_SPARE2, "cpu_idle(%d) at %d done", busy, curcpu); } int cpu_idle_wakeup(int cpu) { struct pcpu *pcpu; int *state; pcpu = pcpu_find(cpu); state = (int *)pcpu->pc_monitorbuf; /* * This doesn't need to be atomic since missing the race will * simply result in unnecessary IPIs. */ if (*state == STATE_SLEEPING) return (0); if (*state == STATE_MWAIT) *state = STATE_RUNNING; return (1); } /* * Ordered by speed/power consumption. */ struct { void *id_fn; char *id_name; } idle_tbl[] = { { cpu_idle_spin, "spin" }, { cpu_idle_mwait, "mwait" }, { cpu_idle_hlt, "hlt" }, { cpu_idle_acpi, "acpi" }, { NULL, NULL } }; static int idle_sysctl_available(SYSCTL_HANDLER_ARGS) { char *avail, *p; int error; int i; avail = malloc(256, M_TEMP, M_WAITOK); p = avail; for (i = 0; idle_tbl[i].id_name != NULL; i++) { if (strstr(idle_tbl[i].id_name, "mwait") && (cpu_feature2 & CPUID2_MON) == 0) continue; if (strcmp(idle_tbl[i].id_name, "acpi") == 0 && cpu_idle_hook == NULL) continue; p += sprintf(p, "%s%s", p != avail ? ", " : "", idle_tbl[i].id_name); } error = sysctl_handle_string(oidp, avail, 0, req); free(avail, M_TEMP); return (error); } SYSCTL_PROC(_machdep, OID_AUTO, idle_available, CTLTYPE_STRING | CTLFLAG_RD, 0, 0, idle_sysctl_available, "A", "list of available idle functions"); static int idle_sysctl(SYSCTL_HANDLER_ARGS) { char buf[16]; int error; char *p; int i; p = "unknown"; for (i = 0; idle_tbl[i].id_name != NULL; i++) { if (idle_tbl[i].id_fn == cpu_idle_fn) { p = idle_tbl[i].id_name; break; } } strncpy(buf, p, sizeof(buf)); error = sysctl_handle_string(oidp, buf, sizeof(buf), req); if (error != 0 || req->newptr == NULL) return (error); for (i = 0; idle_tbl[i].id_name != NULL; i++) { if (strstr(idle_tbl[i].id_name, "mwait") && (cpu_feature2 & CPUID2_MON) == 0) continue; if (strcmp(idle_tbl[i].id_name, "acpi") == 0 && cpu_idle_hook == NULL) continue; if (strcmp(idle_tbl[i].id_name, buf)) continue; cpu_idle_fn = idle_tbl[i].id_fn; return (0); } return (EINVAL); } SYSCTL_PROC(_machdep, OID_AUTO, idle, CTLTYPE_STRING | CTLFLAG_RW, 0, 0, idle_sysctl, "A", "currently selected idle function"); /* * Reset registers to default values on exec. */ void exec_setregs(struct thread *td, struct image_params *imgp, u_long stack) { struct trapframe *regs = td->td_frame; struct pcb *pcb = td->td_pcb; mtx_lock(&dt_lock); if (td->td_proc->p_md.md_ldt != NULL) user_ldt_free(td); else mtx_unlock(&dt_lock); pcb->pcb_fsbase = 0; pcb->pcb_gsbase = 0; clear_pcb_flags(pcb, PCB_32BIT); pcb->pcb_initial_fpucw = __INITIAL_FPUCW__; set_pcb_flags(pcb, PCB_FULL_IRET); bzero((char *)regs, sizeof(struct trapframe)); regs->tf_rip = imgp->entry_addr; regs->tf_rsp = ((stack - 8) & ~0xFul) + 8; regs->tf_rdi = stack; /* argv */ regs->tf_rflags = PSL_USER | (regs->tf_rflags & PSL_T); regs->tf_ss = _udatasel; regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _ufssel; regs->tf_gs = _ugssel; regs->tf_flags = TF_HASSEGS; td->td_retval[1] = 0; /* * Reset the hardware debug registers if they were in use. * They won't have any meaning for the newly exec'd process. */ if (pcb->pcb_flags & PCB_DBREGS) { pcb->pcb_dr0 = 0; pcb->pcb_dr1 = 0; pcb->pcb_dr2 = 0; pcb->pcb_dr3 = 0; pcb->pcb_dr6 = 0; pcb->pcb_dr7 = 0; if (pcb == curpcb) { /* * Clear the debug registers on the running * CPU, otherwise they will end up affecting * the next process we switch to. */ reset_dbregs(); } clear_pcb_flags(pcb, PCB_DBREGS); } /* * Drop the FP state if we hold it, so that the process gets a * clean FP state if it uses the FPU again. */ fpstate_drop(td); } void cpu_setregs(void) { register_t cr0; cr0 = rcr0(); /* * CR0_MP, CR0_NE and CR0_TS are also set by npx_probe() for the * BSP. See the comments there about why we set them. */ cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; load_cr0(cr0); } /* * Initialize amd64 and configure to run kernel */ /* * Initialize segments & interrupt table */ struct user_segment_descriptor gdt[NGDT * MAXCPU];/* global descriptor tables */ static struct gate_descriptor idt0[NIDT]; struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ static char dblfault_stack[PAGE_SIZE] __aligned(16); static char nmi0_stack[PAGE_SIZE] __aligned(16); CTASSERT(sizeof(struct nmi_pcpu) == 16); struct amd64tss common_tss[MAXCPU]; /* * Software prototypes -- in more palatable form. * * Keep GUFS32, GUGS32, GUCODE32 and GUDATA at the same * slots as corresponding segments for i386 kernel. */ struct soft_segment_descriptor gdt_segs[] = { /* GNULL_SEL 0 Null Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GNULL2_SEL 1 Null Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUFS32_SEL 2 32 bit %gs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUGS32_SEL 3 32 bit %fs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GCODE_SEL 4 Code Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_long = 1, .ssd_def32 = 0, .ssd_gran = 1 }, /* GDATA_SEL 5 Data Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_long = 1, .ssd_def32 = 0, .ssd_gran = 1 }, /* GUCODE32_SEL 6 32 bit Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUDATA_SEL 7 32/64 bit Data Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUCODE_SEL 8 64 bit Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_long = 1, .ssd_def32 = 0, .ssd_gran = 1 }, /* GPROC0_SEL 9 Proc 0 Tss Descriptor */ { .ssd_base = 0x0, .ssd_limit = sizeof(struct amd64tss) + IOPAGES * PAGE_SIZE - 1, .ssd_type = SDT_SYSTSS, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Actually, the TSS is a system descriptor which is double size */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUSERLDT_SEL 11 LDT Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUSERLDT_SEL 12 LDT Descriptor, double size */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_long = 0, .ssd_def32 = 0, .ssd_gran = 0 }, }; void setidt(int idx, inthand_t *func, int typ, int dpl, int ist) { struct gate_descriptor *ip; ip = idt + idx; ip->gd_looffset = (uintptr_t)func; ip->gd_selector = GSEL(GCODE_SEL, SEL_KPL); ip->gd_ist = ist; ip->gd_xx = 0; ip->gd_type = typ; ip->gd_dpl = dpl; ip->gd_p = 1; ip->gd_hioffset = ((uintptr_t)func)>>16 ; } extern inthand_t IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), IDTVEC(xmm), IDTVEC(dblfault), #ifdef KDTRACE_HOOKS IDTVEC(dtrace_ret), #endif #ifdef XENHVM IDTVEC(xen_intr_upcall), #endif IDTVEC(fast_syscall), IDTVEC(fast_syscall32); #ifdef DDB /* * Display the index and function name of any IDT entries that don't use * the default 'rsvd' entry point. */ DB_SHOW_COMMAND(idt, db_show_idt) { struct gate_descriptor *ip; int idx; uintptr_t func; ip = idt; for (idx = 0; idx < NIDT && !db_pager_quit; idx++) { func = ((long)ip->gd_hioffset << 16 | ip->gd_looffset); if (func != (uintptr_t)&IDTVEC(rsvd)) { db_printf("%3d\t", idx); db_printsym(func, DB_STGY_PROC); db_printf("\n"); } ip++; } } /* Show privileged registers. */ DB_SHOW_COMMAND(sysregs, db_show_sysregs) { struct { uint16_t limit; uint64_t base; } __packed idtr, gdtr; uint16_t ldt, tr; __asm __volatile("sidt %0" : "=m" (idtr)); db_printf("idtr\t0x%016lx/%04x\n", (u_long)idtr.base, (u_int)idtr.limit); __asm __volatile("sgdt %0" : "=m" (gdtr)); db_printf("gdtr\t0x%016lx/%04x\n", (u_long)gdtr.base, (u_int)gdtr.limit); __asm __volatile("sldt %0" : "=r" (ldt)); db_printf("ldtr\t0x%04x\n", ldt); __asm __volatile("str %0" : "=r" (tr)); db_printf("tr\t0x%04x\n", tr); db_printf("cr0\t0x%016lx\n", rcr0()); db_printf("cr2\t0x%016lx\n", rcr2()); db_printf("cr3\t0x%016lx\n", rcr3()); db_printf("cr4\t0x%016lx\n", rcr4()); if (rcr4() & CR4_XSAVE) db_printf("xcr0\t0x%016lx\n", rxcr(0)); db_printf("EFER\t0x%016lx\n", rdmsr(MSR_EFER)); if (cpu_feature2 & (CPUID2_VMX | CPUID2_SMX)) db_printf("FEATURES_CTL\t%016lx\n", rdmsr(MSR_IA32_FEATURE_CONTROL)); db_printf("DEBUG_CTL\t0x%016lx\n", rdmsr(MSR_DEBUGCTLMSR)); db_printf("PAT\t0x%016lx\n", rdmsr(MSR_PAT)); db_printf("GSBASE\t0x%016lx\n", rdmsr(MSR_GSBASE)); } DB_SHOW_COMMAND(dbregs, db_show_dbregs) { db_printf("dr0\t0x%016lx\n", rdr0()); db_printf("dr1\t0x%016lx\n", rdr1()); db_printf("dr2\t0x%016lx\n", rdr2()); db_printf("dr3\t0x%016lx\n", rdr3()); db_printf("dr6\t0x%016lx\n", rdr6()); db_printf("dr7\t0x%016lx\n", rdr7()); } #endif void sdtossd(sd, ssd) struct user_segment_descriptor *sd; struct soft_segment_descriptor *ssd; { ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; ssd->ssd_type = sd->sd_type; ssd->ssd_dpl = sd->sd_dpl; ssd->ssd_p = sd->sd_p; ssd->ssd_long = sd->sd_long; ssd->ssd_def32 = sd->sd_def32; ssd->ssd_gran = sd->sd_gran; } void ssdtosd(ssd, sd) struct soft_segment_descriptor *ssd; struct user_segment_descriptor *sd; { sd->sd_lobase = (ssd->ssd_base) & 0xffffff; sd->sd_hibase = (ssd->ssd_base >> 24) & 0xff; sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; sd->sd_type = ssd->ssd_type; sd->sd_dpl = ssd->ssd_dpl; sd->sd_p = ssd->ssd_p; sd->sd_long = ssd->ssd_long; sd->sd_def32 = ssd->ssd_def32; sd->sd_gran = ssd->ssd_gran; } void ssdtosyssd(ssd, sd) struct soft_segment_descriptor *ssd; struct system_segment_descriptor *sd; { sd->sd_lobase = (ssd->ssd_base) & 0xffffff; sd->sd_hibase = (ssd->ssd_base >> 24) & 0xfffffffffful; sd->sd_lolimit = (ssd->ssd_limit) & 0xffff; sd->sd_hilimit = (ssd->ssd_limit >> 16) & 0xf; sd->sd_type = ssd->ssd_type; sd->sd_dpl = ssd->ssd_dpl; sd->sd_p = ssd->ssd_p; sd->sd_gran = ssd->ssd_gran; } #if !defined(DEV_ATPIC) && defined(DEV_ISA) #include #include /* * Return a bitmap of the current interrupt requests. This is 8259-specific * and is only suitable for use at probe time. * This is only here to pacify sio. It is NOT FATAL if this doesn't work. * It shouldn't be here. There should probably be an APIC centric * implementation in the apic driver code, if at all. */ intrmask_t isa_irq_pending(void) { u_char irr1; u_char irr2; irr1 = inb(IO_ICU1); irr2 = inb(IO_ICU2); return ((irr2 << 8) | irr1); } #endif u_int basemem; static int add_physmap_entry(uint64_t base, uint64_t length, vm_paddr_t *physmap, int *physmap_idxp) { int i, insert_idx, physmap_idx; physmap_idx = *physmap_idxp; if (length == 0) return (1); /* * Find insertion point while checking for overlap. Start off by * assuming the new entry will be added to the end. * * NB: physmap_idx points to the next free slot. */ insert_idx = physmap_idx; for (i = 0; i <= physmap_idx; i += 2) { if (base < physmap[i + 1]) { if (base + length <= physmap[i]) { insert_idx = i; break; } if (boothowto & RB_VERBOSE) printf( "Overlapping memory regions, ignoring second region\n"); return (1); } } /* See if we can prepend to the next entry. */ if (insert_idx <= physmap_idx && base + length == physmap[insert_idx]) { physmap[insert_idx] = base; return (1); } /* See if we can append to the previous entry. */ if (insert_idx > 0 && base == physmap[insert_idx - 1]) { physmap[insert_idx - 1] += length; return (1); } physmap_idx += 2; *physmap_idxp = physmap_idx; if (physmap_idx == PHYSMAP_SIZE) { printf( "Too many segments in the physical address map, giving up\n"); return (0); } /* * Move the last 'N' entries down to make room for the new * entry if needed. */ for (i = (physmap_idx - 2); i > insert_idx; i -= 2) { physmap[i] = physmap[i - 2]; physmap[i + 1] = physmap[i - 1]; } /* Insert the new entry. */ physmap[insert_idx] = base; physmap[insert_idx + 1] = base + length; return (1); } static void add_smap_entries(struct bios_smap *smapbase, vm_paddr_t *physmap, int *physmap_idx) { struct bios_smap *smap, *smapend; u_int32_t smapsize; /* * Memory map from INT 15:E820. * * subr_module.c says: * "Consumer may safely assume that size value precedes data." * ie: an int32_t immediately precedes smap. */ smapsize = *((u_int32_t *)smapbase - 1); smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize); for (smap = smapbase; smap < smapend; smap++) { if (boothowto & RB_VERBOSE) printf("SMAP type=%02x base=%016lx len=%016lx\n", smap->type, smap->base, smap->length); if (smap->type != SMAP_TYPE_MEMORY) continue; if (!add_physmap_entry(smap->base, smap->length, physmap, physmap_idx)) break; } } #define efi_next_descriptor(ptr, size) \ ((struct efi_md *)(((uint8_t *) ptr) + size)) static void add_efi_map_entries(struct efi_map_header *efihdr, vm_paddr_t *physmap, int *physmap_idx) { struct efi_md *map, *p; const char *type; size_t efisz; int ndesc, i; static const char *types[] = { "Reserved", "LoaderCode", "LoaderData", "BootServicesCode", "BootServicesData", "RuntimeServicesCode", "RuntimeServicesData", "ConventionalMemory", "UnusableMemory", "ACPIReclaimMemory", "ACPIMemoryNVS", "MemoryMappedIO", "MemoryMappedIOPortSpace", "PalCode" }; /* * Memory map data provided by UEFI via the GetMemoryMap * Boot Services API. */ efisz = (sizeof(struct efi_map_header) + 0xf) & ~0xf; map = (struct efi_md *)((uint8_t *)efihdr + efisz); if (efihdr->descriptor_size == 0) return; ndesc = efihdr->memory_size / efihdr->descriptor_size; if (boothowto & RB_VERBOSE) printf("%23s %12s %12s %8s %4s\n", "Type", "Physical", "Virtual", "#Pages", "Attr"); for (i = 0, p = map; i < ndesc; i++, p = efi_next_descriptor(p, efihdr->descriptor_size)) { if (boothowto & RB_VERBOSE) { if (p->md_type <= EFI_MD_TYPE_PALCODE) type = types[p->md_type]; else type = ""; printf("%23s %012lx %12p %08lx ", type, p->md_phys, p->md_virt, p->md_pages); if (p->md_attr & EFI_MD_ATTR_UC) printf("UC "); if (p->md_attr & EFI_MD_ATTR_WC) printf("WC "); if (p->md_attr & EFI_MD_ATTR_WT) printf("WT "); if (p->md_attr & EFI_MD_ATTR_WB) printf("WB "); if (p->md_attr & EFI_MD_ATTR_UCE) printf("UCE "); if (p->md_attr & EFI_MD_ATTR_WP) printf("WP "); if (p->md_attr & EFI_MD_ATTR_RP) printf("RP "); if (p->md_attr & EFI_MD_ATTR_XP) printf("XP "); if (p->md_attr & EFI_MD_ATTR_RT) printf("RUNTIME"); printf("\n"); } switch (p->md_type) { case EFI_MD_TYPE_CODE: case EFI_MD_TYPE_DATA: case EFI_MD_TYPE_BS_CODE: case EFI_MD_TYPE_BS_DATA: case EFI_MD_TYPE_FREE: /* * We're allowed to use any entry with these types. */ break; default: continue; } if (!add_physmap_entry(p->md_phys, (p->md_pages * PAGE_SIZE), physmap, physmap_idx)) break; } } static char bootmethod[16] = ""; SYSCTL_STRING(_machdep, OID_AUTO, bootmethod, CTLFLAG_RD, bootmethod, 0, "System firmware boot method"); #define PAGES_PER_GB (1024 * 1024 * 1024 / PAGE_SIZE) /* * Populate the (physmap) array with base/bound pairs describing the * available physical memory in the system, then test this memory and * build the phys_avail array describing the actually-available memory. * * Total memory size may be set by the kernel environment variable * hw.physmem or the compile-time define MAXMEM. * * XXX first should be vm_paddr_t. */ static void getmemsize(caddr_t kmdp, u_int64_t first) { int i, physmap_idx, pa_indx, da_indx; vm_paddr_t pa, physmap[PHYSMAP_SIZE]; u_long physmem_start, physmem_tunable, memtest; pt_entry_t *pte; struct bios_smap *smapbase; struct efi_map_header *efihdr; quad_t dcons_addr, dcons_size; int page_counter; bzero(physmap, sizeof(physmap)); physmap_idx = 0; efihdr = (struct efi_map_header *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_EFI_MAP); smapbase = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (efihdr != NULL) { add_efi_map_entries(efihdr, physmap, &physmap_idx); strlcpy(bootmethod, "UEFI", sizeof(bootmethod)); } else if (smapbase != NULL) { add_smap_entries(smapbase, physmap, &physmap_idx); strlcpy(bootmethod, "BIOS", sizeof(bootmethod)); } else { panic("No BIOS smap or EFI map info from loader!"); } physmap_idx -= 2; /* * Find the 'base memory' segment for SMP */ basemem = 0; for (i = 0; i <= physmap_idx; i += 2) { if (physmap[i] <= 0xA0000) { basemem = physmap[i + 1] / 1024; break; } } if (basemem == 0 || basemem > 640) { if (bootverbose) printf( "Memory map doesn't contain a basemem segment, faking it"); basemem = 640; } #ifdef SMP /* make hole for AP bootstrap code */ if (physmap[1] >= 0x100000000) panic("Basemem segment is not suitable for AP bootstrap code!"); physmap[1] = mp_bootaddress(physmap[1] / 1024); #endif /* * Maxmem isn't the "maximum memory", it's one larger than the * highest page of the physical address space. It should be * called something like "Maxphyspage". We may adjust this * based on ``hw.physmem'' and the results of the memory test. */ Maxmem = atop(physmap[physmap_idx + 1]); #ifdef MAXMEM Maxmem = MAXMEM / 4; #endif if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable)) Maxmem = atop(physmem_tunable); /* * The boot memory test is disabled by default, as it takes a * significant amount of time on large-memory systems, and is * unfriendly to virtual machines as it unnecessarily touches all * pages. * * A general name is used as the code may be extended to support * additional tests beyond the current "page present" test. */ memtest = 0; TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest); /* * Don't allow MAXMEM or hw.physmem to extend the amount of memory * in the system. */ if (Maxmem > atop(physmap[physmap_idx + 1])) Maxmem = atop(physmap[physmap_idx + 1]); if (atop(physmap[physmap_idx + 1]) != Maxmem && (boothowto & RB_VERBOSE)) printf("Physical memory use set to %ldK\n", Maxmem * 4); /* call pmap initialization to make new kernel address space */ pmap_bootstrap(&first); /* * Size up each available chunk of physical memory. * * XXX Some BIOSes corrupt low 64KB between suspend and resume. * By default, mask off the first 16 pages unless we appear to be * running in a VM. */ physmem_start = (vm_guest > VM_GUEST_NO ? 1 : 16) << PAGE_SHIFT; TUNABLE_ULONG_FETCH("hw.physmem.start", &physmem_start); if (physmap[0] < physmem_start) { if (physmem_start < PAGE_SIZE) physmap[0] = PAGE_SIZE; else if (physmem_start >= physmap[1]) physmap[0] = round_page(physmap[1] - PAGE_SIZE); else physmap[0] = round_page(physmem_start); } pa_indx = 0; da_indx = 1; phys_avail[pa_indx++] = physmap[0]; phys_avail[pa_indx] = physmap[0]; dump_avail[da_indx] = physmap[0]; pte = CMAP1; /* * Get dcons buffer address */ if (getenv_quad("dcons.addr", &dcons_addr) == 0 || getenv_quad("dcons.size", &dcons_size) == 0) dcons_addr = 0; /* * physmap is in bytes, so when converting to page boundaries, * round up the start address and round down the end address. */ page_counter = 0; if (memtest != 0) printf("Testing system memory"); for (i = 0; i <= physmap_idx; i += 2) { vm_paddr_t end; end = ptoa((vm_paddr_t)Maxmem); if (physmap[i + 1] < end) end = trunc_page(physmap[i + 1]); for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { int tmp, page_bad, full; int *ptr = (int *)CADDR1; full = FALSE; /* * block out kernel memory as not available. */ if (pa >= (vm_paddr_t)kernphys && pa < first) goto do_dump_avail; /* * block out dcons buffer */ if (dcons_addr > 0 && pa >= trunc_page(dcons_addr) && pa < dcons_addr + dcons_size) goto do_dump_avail; page_bad = FALSE; if (memtest == 0) goto skip_memtest; /* * Print a "." every GB to show we're making * progress. */ page_counter++; if ((page_counter % PAGES_PER_GB) == 0) printf("."); /* * map page into kernel: valid, read/write,non-cacheable */ *pte = pa | PG_V | PG_RW | PG_NC_PWT | PG_NC_PCD; invltlb(); tmp = *(int *)ptr; /* * Test for alternating 1's and 0's */ *(volatile int *)ptr = 0xaaaaaaaa; if (*(volatile int *)ptr != 0xaaaaaaaa) page_bad = TRUE; /* * Test for alternating 0's and 1's */ *(volatile int *)ptr = 0x55555555; if (*(volatile int *)ptr != 0x55555555) page_bad = TRUE; /* * Test for all 1's */ *(volatile int *)ptr = 0xffffffff; if (*(volatile int *)ptr != 0xffffffff) page_bad = TRUE; /* * Test for all 0's */ *(volatile int *)ptr = 0x0; if (*(volatile int *)ptr != 0x0) page_bad = TRUE; /* * Restore original value. */ *(int *)ptr = tmp; skip_memtest: /* * Adjust array of valid/good pages. */ if (page_bad == TRUE) continue; /* * If this good page is a continuation of the * previous set of good pages, then just increase * the end pointer. Otherwise start a new chunk. * Note that "end" points one higher than end, * making the range >= start and < end. * If we're also doing a speculative memory * test and we at or past the end, bump up Maxmem * so that we keep going. The first bad page * will terminate the loop. */ if (phys_avail[pa_indx] == pa) { phys_avail[pa_indx] += PAGE_SIZE; } else { pa_indx++; if (pa_indx == PHYS_AVAIL_ARRAY_END) { printf( "Too many holes in the physical address space, giving up\n"); pa_indx--; full = TRUE; goto do_dump_avail; } phys_avail[pa_indx++] = pa; /* start */ phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ } physmem++; do_dump_avail: if (dump_avail[da_indx] == pa) { dump_avail[da_indx] += PAGE_SIZE; } else { da_indx++; if (da_indx == DUMP_AVAIL_ARRAY_END) { da_indx--; goto do_next; } dump_avail[da_indx++] = pa; /* start */ dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ } do_next: if (full) break; } } *pte = 0; invltlb(); if (memtest != 0) printf("\n"); /* * XXX * The last chunk must contain at least one page plus the message * buffer to avoid complicating other code (message buffer address * calculation, etc.). */ while (phys_avail[pa_indx - 1] + PAGE_SIZE + round_page(msgbufsize) >= phys_avail[pa_indx]) { physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); phys_avail[pa_indx--] = 0; phys_avail[pa_indx--] = 0; } Maxmem = atop(phys_avail[pa_indx]); /* Trim off space for the message buffer. */ phys_avail[pa_indx] -= round_page(msgbufsize); /* Map the message buffer. */ msgbufp = (struct msgbuf *)PHYS_TO_DMAP(phys_avail[pa_indx]); } u_int64_t hammer_time(u_int64_t modulep, u_int64_t physfree) { caddr_t kmdp; int gsel_tss, x; struct pcpu *pc; struct nmi_pcpu *np; struct xstate_hdr *xhdr; u_int64_t msr; char *env; size_t kstack0_sz; thread0.td_kstack = physfree + KERNBASE; thread0.td_kstack_pages = KSTACK_PAGES; kstack0_sz = thread0.td_kstack_pages * PAGE_SIZE; bzero((void *)thread0.td_kstack, kstack0_sz); physfree += kstack0_sz; /* * This may be done better later if it gets more high level * components in it. If so just link td->td_proc here. */ proc_linkup0(&proc0, &thread0); preload_metadata = (caddr_t)(uintptr_t)(modulep + KERNBASE); preload_bootstrap_relocate(KERNBASE); kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf64 kernel"); boothowto = MD_FETCH(kmdp, MODINFOMD_HOWTO, int); init_static_kenv(MD_FETCH(kmdp, MODINFOMD_ENVP, char *) + KERNBASE, 0); #ifdef DDB ksym_start = MD_FETCH(kmdp, MODINFOMD_SSYM, uintptr_t); ksym_end = MD_FETCH(kmdp, MODINFOMD_ESYM, uintptr_t); #endif + identify_hypervisor(); + /* Init basic tunables, hz etc */ init_param1(); /* * make gdt memory segments */ for (x = 0; x < NGDT; x++) { if (x != GPROC0_SEL && x != (GPROC0_SEL + 1) && x != GUSERLDT_SEL && x != (GUSERLDT_SEL) + 1) ssdtosd(&gdt_segs[x], &gdt[x]); } gdt_segs[GPROC0_SEL].ssd_base = (uintptr_t)&common_tss[0]; ssdtosyssd(&gdt_segs[GPROC0_SEL], (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; r_gdt.rd_base = (long) gdt; lgdt(&r_gdt); pc = &__pcpu[0]; wrmsr(MSR_FSBASE, 0); /* User value */ wrmsr(MSR_GSBASE, (u_int64_t)pc); wrmsr(MSR_KGSBASE, 0); /* User value while in the kernel */ pcpu_init(pc, 0, sizeof(struct pcpu)); dpcpu_init((void *)(physfree + KERNBASE), 0); physfree += DPCPU_SIZE; PCPU_SET(prvspace, pc); PCPU_SET(curthread, &thread0); PCPU_SET(tssp, &common_tss[0]); PCPU_SET(commontssp, &common_tss[0]); PCPU_SET(tss, (struct system_segment_descriptor *)&gdt[GPROC0_SEL]); PCPU_SET(ldt, (struct system_segment_descriptor *)&gdt[GUSERLDT_SEL]); PCPU_SET(fs32p, &gdt[GUFS32_SEL]); PCPU_SET(gs32p, &gdt[GUGS32_SEL]); /* * Initialize mutexes. * * icu_lock: in order to allow an interrupt to occur in a critical * section, to set pcpu->ipending (etc...) properly, we * must be able to get the icu lock, so it can't be * under witness. */ mutex_init(); mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS); mtx_init(&dt_lock, "descriptor tables", NULL, MTX_DEF); /* exceptions */ for (x = 0; x < NIDT; x++) setidt(x, &IDTVEC(rsvd), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_DE, &IDTVEC(div), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_DB, &IDTVEC(dbg), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYSIGT, SEL_KPL, 2); setidt(IDT_BP, &IDTVEC(bpt), SDT_SYSIGT, SEL_UPL, 0); setidt(IDT_OF, &IDTVEC(ofl), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_BR, &IDTVEC(bnd), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_UD, &IDTVEC(ill), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_NM, &IDTVEC(dna), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_DF, &IDTVEC(dblfault), SDT_SYSIGT, SEL_KPL, 1); setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_TS, &IDTVEC(tss), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_NP, &IDTVEC(missing), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_SS, &IDTVEC(stk), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_GP, &IDTVEC(prot), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_PF, &IDTVEC(page), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_MF, &IDTVEC(fpu), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_AC, &IDTVEC(align), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_MC, &IDTVEC(mchk), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_XF, &IDTVEC(xmm), SDT_SYSIGT, SEL_KPL, 0); #ifdef KDTRACE_HOOKS setidt(IDT_DTRACE_RET, &IDTVEC(dtrace_ret), SDT_SYSIGT, SEL_UPL, 0); #endif #ifdef XENHVM setidt(IDT_EVTCHN, &IDTVEC(xen_intr_upcall), SDT_SYSIGT, SEL_UPL, 0); #endif r_idt.rd_limit = sizeof(idt0) - 1; r_idt.rd_base = (long) idt; lidt(&r_idt); /* * Initialize the i8254 before the console so that console * initialization can use DELAY(). */ i8254_init(); /* * Use vt(4) by default for UEFI boot (during the sc(4)/vt(4) * transition). */ if (kmdp != NULL && preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_EFI_MAP) != NULL) vty_set_preferred(VTY_VT); identify_cpu(); /* Final stage of CPU initialization */ initializecpu(); /* Initialize CPU registers */ initializecpucache(); /* doublefault stack space, runs on ist1 */ common_tss[0].tss_ist1 = (long)&dblfault_stack[sizeof(dblfault_stack)]; /* * NMI stack, runs on ist2. The pcpu pointer is stored just * above the start of the ist2 stack. */ np = ((struct nmi_pcpu *) &nmi0_stack[sizeof(nmi0_stack)]) - 1; np->np_pcpu = (register_t) pc; common_tss[0].tss_ist2 = (long) np; /* Set the IO permission bitmap (empty due to tss seg limit) */ common_tss[0].tss_iobase = sizeof(struct amd64tss) + IOPAGES * PAGE_SIZE; gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); ltr(gsel_tss); /* Set up the fast syscall stuff */ msr = rdmsr(MSR_EFER) | EFER_SCE; wrmsr(MSR_EFER, msr); wrmsr(MSR_LSTAR, (u_int64_t)IDTVEC(fast_syscall)); wrmsr(MSR_CSTAR, (u_int64_t)IDTVEC(fast_syscall32)); msr = ((u_int64_t)GSEL(GCODE_SEL, SEL_KPL) << 32) | ((u_int64_t)GSEL(GUCODE32_SEL, SEL_UPL) << 48); wrmsr(MSR_STAR, msr); wrmsr(MSR_SF_MASK, PSL_NT|PSL_T|PSL_I|PSL_C|PSL_D); getmemsize(kmdp, physfree); init_param2(physmem); /* now running on new page tables, configured,and u/iom is accessible */ cninit(); #ifdef DEV_ISA #ifdef DEV_ATPIC elcr_probe(); atpic_startup(); #else /* Reset and mask the atpics and leave them shut down. */ atpic_reset(); /* * Point the ICU spurious interrupt vectors at the APIC spurious * interrupt handler. */ setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYSIGT, SEL_KPL, 0); #endif #else #error "have you forgotten the isa device?"; #endif kdb_init(); #ifdef KDB if (boothowto & RB_KDB) kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger"); #endif msgbufinit(msgbufp, msgbufsize); fpuinit(); /* * Set up thread0 pcb after fpuinit calculated pcb + fpu save * area size. Zero out the extended state header in fpu save * area. */ thread0.td_pcb = get_pcb_td(&thread0); thread0.td_pcb->pcb_save = get_pcb_user_save_td(&thread0); bzero(get_pcb_user_save_td(&thread0), cpu_max_ext_state_size); if (use_xsave) { xhdr = (struct xstate_hdr *)(get_pcb_user_save_td(&thread0) + 1); xhdr->xstate_bv = xsave_mask; } /* make an initial tss so cpu can get interrupt stack on syscall! */ common_tss[0].tss_rsp0 = (vm_offset_t)thread0.td_pcb; /* Ensure the stack is aligned to 16 bytes */ common_tss[0].tss_rsp0 &= ~0xFul; PCPU_SET(rsp0, common_tss[0].tss_rsp0); PCPU_SET(curpcb, thread0.td_pcb); /* transfer to user mode */ _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); _udatasel = GSEL(GUDATA_SEL, SEL_UPL); _ucode32sel = GSEL(GUCODE32_SEL, SEL_UPL); _ufssel = GSEL(GUFS32_SEL, SEL_UPL); _ugssel = GSEL(GUGS32_SEL, SEL_UPL); load_ds(_udatasel); load_es(_udatasel); load_fs(_ufssel); /* setup proc 0's pcb */ thread0.td_pcb->pcb_flags = 0; thread0.td_pcb->pcb_cr3 = KPML4phys; /* PCID 0 is reserved for kernel */ thread0.td_frame = &proc0_tf; env = getenv("kernelname"); if (env != NULL) strlcpy(kernelname, env, sizeof(kernelname)); cpu_probe_amdc1e(); #ifdef FDT x86_init_fdt(); #endif /* Location of kernel stack for locore */ return ((u_int64_t)thread0.td_pcb); } void cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) { pcpu->pc_acpi_id = 0xffffffff; } static int smap_sysctl_handler(SYSCTL_HANDLER_ARGS) { struct bios_smap *smapbase; struct bios_smap_xattr smap; caddr_t kmdp; uint32_t *smapattr; int count, error, i; /* Retrieve the system memory map from the loader. */ kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf64 kernel"); smapbase = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (smapbase == NULL) return (0); smapattr = (uint32_t *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP_XATTR); count = *((uint32_t *)smapbase - 1) / sizeof(*smapbase); error = 0; for (i = 0; i < count; i++) { smap.base = smapbase[i].base; smap.length = smapbase[i].length; smap.type = smapbase[i].type; if (smapattr != NULL) smap.xattr = smapattr[i]; else smap.xattr = 0; error = SYSCTL_OUT(req, &smap, sizeof(smap)); } return (error); } SYSCTL_PROC(_machdep, OID_AUTO, smap, CTLTYPE_OPAQUE|CTLFLAG_RD, NULL, 0, smap_sysctl_handler, "S,bios_smap_xattr", "Raw BIOS SMAP data"); static int efi_map_sysctl_handler(SYSCTL_HANDLER_ARGS) { struct efi_map_header *efihdr; caddr_t kmdp; uint32_t efisize; kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf64 kernel"); efihdr = (struct efi_map_header *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_EFI_MAP); if (efihdr == NULL) return (0); efisize = *((uint32_t *)efihdr - 1); return (SYSCTL_OUT(req, efihdr, efisize)); } SYSCTL_PROC(_machdep, OID_AUTO, efi_map, CTLTYPE_OPAQUE|CTLFLAG_RD, NULL, 0, efi_map_sysctl_handler, "S,efi_map_header", "Raw EFI Memory Map"); void spinlock_enter(void) { struct thread *td; register_t flags; td = curthread; if (td->td_md.md_spinlock_count == 0) { flags = intr_disable(); td->td_md.md_spinlock_count = 1; td->td_md.md_saved_flags = flags; } else td->td_md.md_spinlock_count++; critical_enter(); } void spinlock_exit(void) { struct thread *td; register_t flags; td = curthread; critical_exit(); flags = td->td_md.md_saved_flags; td->td_md.md_spinlock_count--; if (td->td_md.md_spinlock_count == 0) intr_restore(flags); } /* * Construct a PCB from a trapframe. This is called from kdb_trap() where * we want to start a backtrace from the function that caused us to enter * the debugger. We have the context in the trapframe, but base the trace * on the PCB. The PCB doesn't have to be perfect, as long as it contains * enough for a backtrace. */ void makectx(struct trapframe *tf, struct pcb *pcb) { pcb->pcb_r12 = tf->tf_r12; pcb->pcb_r13 = tf->tf_r13; pcb->pcb_r14 = tf->tf_r14; pcb->pcb_r15 = tf->tf_r15; pcb->pcb_rbp = tf->tf_rbp; pcb->pcb_rbx = tf->tf_rbx; pcb->pcb_rip = tf->tf_rip; pcb->pcb_rsp = tf->tf_rsp; } int ptrace_set_pc(struct thread *td, unsigned long addr) { td->td_frame->tf_rip = addr; set_pcb_flags(td->td_pcb, PCB_FULL_IRET); return (0); } int ptrace_single_step(struct thread *td) { td->td_frame->tf_rflags |= PSL_T; return (0); } int ptrace_clear_single_step(struct thread *td) { td->td_frame->tf_rflags &= ~PSL_T; return (0); } int fill_regs(struct thread *td, struct reg *regs) { struct trapframe *tp; tp = td->td_frame; return (fill_frame_regs(tp, regs)); } int fill_frame_regs(struct trapframe *tp, struct reg *regs) { regs->r_r15 = tp->tf_r15; regs->r_r14 = tp->tf_r14; regs->r_r13 = tp->tf_r13; regs->r_r12 = tp->tf_r12; regs->r_r11 = tp->tf_r11; regs->r_r10 = tp->tf_r10; regs->r_r9 = tp->tf_r9; regs->r_r8 = tp->tf_r8; regs->r_rdi = tp->tf_rdi; regs->r_rsi = tp->tf_rsi; regs->r_rbp = tp->tf_rbp; regs->r_rbx = tp->tf_rbx; regs->r_rdx = tp->tf_rdx; regs->r_rcx = tp->tf_rcx; regs->r_rax = tp->tf_rax; regs->r_rip = tp->tf_rip; regs->r_cs = tp->tf_cs; regs->r_rflags = tp->tf_rflags; regs->r_rsp = tp->tf_rsp; regs->r_ss = tp->tf_ss; if (tp->tf_flags & TF_HASSEGS) { regs->r_ds = tp->tf_ds; regs->r_es = tp->tf_es; regs->r_fs = tp->tf_fs; regs->r_gs = tp->tf_gs; } else { regs->r_ds = 0; regs->r_es = 0; regs->r_fs = 0; regs->r_gs = 0; } return (0); } int set_regs(struct thread *td, struct reg *regs) { struct trapframe *tp; register_t rflags; tp = td->td_frame; rflags = regs->r_rflags & 0xffffffff; if (!EFL_SECURE(rflags, tp->tf_rflags) || !CS_SECURE(regs->r_cs)) return (EINVAL); tp->tf_r15 = regs->r_r15; tp->tf_r14 = regs->r_r14; tp->tf_r13 = regs->r_r13; tp->tf_r12 = regs->r_r12; tp->tf_r11 = regs->r_r11; tp->tf_r10 = regs->r_r10; tp->tf_r9 = regs->r_r9; tp->tf_r8 = regs->r_r8; tp->tf_rdi = regs->r_rdi; tp->tf_rsi = regs->r_rsi; tp->tf_rbp = regs->r_rbp; tp->tf_rbx = regs->r_rbx; tp->tf_rdx = regs->r_rdx; tp->tf_rcx = regs->r_rcx; tp->tf_rax = regs->r_rax; tp->tf_rip = regs->r_rip; tp->tf_cs = regs->r_cs; tp->tf_rflags = rflags; tp->tf_rsp = regs->r_rsp; tp->tf_ss = regs->r_ss; if (0) { /* XXXKIB */ tp->tf_ds = regs->r_ds; tp->tf_es = regs->r_es; tp->tf_fs = regs->r_fs; tp->tf_gs = regs->r_gs; tp->tf_flags = TF_HASSEGS; } set_pcb_flags(td->td_pcb, PCB_FULL_IRET); return (0); } /* XXX check all this stuff! */ /* externalize from sv_xmm */ static void fill_fpregs_xmm(struct savefpu *sv_xmm, struct fpreg *fpregs) { struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; struct envxmm *penv_xmm = &sv_xmm->sv_env; int i; /* pcb -> fpregs */ bzero(fpregs, sizeof(*fpregs)); /* FPU control/status */ penv_fpreg->en_cw = penv_xmm->en_cw; penv_fpreg->en_sw = penv_xmm->en_sw; penv_fpreg->en_tw = penv_xmm->en_tw; penv_fpreg->en_opcode = penv_xmm->en_opcode; penv_fpreg->en_rip = penv_xmm->en_rip; penv_fpreg->en_rdp = penv_xmm->en_rdp; penv_fpreg->en_mxcsr = penv_xmm->en_mxcsr; penv_fpreg->en_mxcsr_mask = penv_xmm->en_mxcsr_mask; /* FPU registers */ for (i = 0; i < 8; ++i) bcopy(sv_xmm->sv_fp[i].fp_acc.fp_bytes, fpregs->fpr_acc[i], 10); /* SSE registers */ for (i = 0; i < 16; ++i) bcopy(sv_xmm->sv_xmm[i].xmm_bytes, fpregs->fpr_xacc[i], 16); } /* internalize from fpregs into sv_xmm */ static void set_fpregs_xmm(struct fpreg *fpregs, struct savefpu *sv_xmm) { struct envxmm *penv_xmm = &sv_xmm->sv_env; struct envxmm *penv_fpreg = (struct envxmm *)&fpregs->fpr_env; int i; /* fpregs -> pcb */ /* FPU control/status */ penv_xmm->en_cw = penv_fpreg->en_cw; penv_xmm->en_sw = penv_fpreg->en_sw; penv_xmm->en_tw = penv_fpreg->en_tw; penv_xmm->en_opcode = penv_fpreg->en_opcode; penv_xmm->en_rip = penv_fpreg->en_rip; penv_xmm->en_rdp = penv_fpreg->en_rdp; penv_xmm->en_mxcsr = penv_fpreg->en_mxcsr; penv_xmm->en_mxcsr_mask = penv_fpreg->en_mxcsr_mask & cpu_mxcsr_mask; /* FPU registers */ for (i = 0; i < 8; ++i) bcopy(fpregs->fpr_acc[i], sv_xmm->sv_fp[i].fp_acc.fp_bytes, 10); /* SSE registers */ for (i = 0; i < 16; ++i) bcopy(fpregs->fpr_xacc[i], sv_xmm->sv_xmm[i].xmm_bytes, 16); } /* externalize from td->pcb */ int fill_fpregs(struct thread *td, struct fpreg *fpregs) { KASSERT(td == curthread || TD_IS_SUSPENDED(td) || P_SHOULDSTOP(td->td_proc), ("not suspended thread %p", td)); fpugetregs(td); fill_fpregs_xmm(get_pcb_user_save_td(td), fpregs); return (0); } /* internalize to td->pcb */ int set_fpregs(struct thread *td, struct fpreg *fpregs) { set_fpregs_xmm(fpregs, get_pcb_user_save_td(td)); fpuuserinited(td); return (0); } /* * Get machine context. */ int get_mcontext(struct thread *td, mcontext_t *mcp, int flags) { struct pcb *pcb; struct trapframe *tp; pcb = td->td_pcb; tp = td->td_frame; PROC_LOCK(curthread->td_proc); mcp->mc_onstack = sigonstack(tp->tf_rsp); PROC_UNLOCK(curthread->td_proc); mcp->mc_r15 = tp->tf_r15; mcp->mc_r14 = tp->tf_r14; mcp->mc_r13 = tp->tf_r13; mcp->mc_r12 = tp->tf_r12; mcp->mc_r11 = tp->tf_r11; mcp->mc_r10 = tp->tf_r10; mcp->mc_r9 = tp->tf_r9; mcp->mc_r8 = tp->tf_r8; mcp->mc_rdi = tp->tf_rdi; mcp->mc_rsi = tp->tf_rsi; mcp->mc_rbp = tp->tf_rbp; mcp->mc_rbx = tp->tf_rbx; mcp->mc_rcx = tp->tf_rcx; mcp->mc_rflags = tp->tf_rflags; if (flags & GET_MC_CLEAR_RET) { mcp->mc_rax = 0; mcp->mc_rdx = 0; mcp->mc_rflags &= ~PSL_C; } else { mcp->mc_rax = tp->tf_rax; mcp->mc_rdx = tp->tf_rdx; } mcp->mc_rip = tp->tf_rip; mcp->mc_cs = tp->tf_cs; mcp->mc_rsp = tp->tf_rsp; mcp->mc_ss = tp->tf_ss; mcp->mc_ds = tp->tf_ds; mcp->mc_es = tp->tf_es; mcp->mc_fs = tp->tf_fs; mcp->mc_gs = tp->tf_gs; mcp->mc_flags = tp->tf_flags; mcp->mc_len = sizeof(*mcp); get_fpcontext(td, mcp, NULL, 0); mcp->mc_fsbase = pcb->pcb_fsbase; mcp->mc_gsbase = pcb->pcb_gsbase; mcp->mc_xfpustate = 0; mcp->mc_xfpustate_len = 0; bzero(mcp->mc_spare, sizeof(mcp->mc_spare)); return (0); } /* * Set machine context. * * However, we don't set any but the user modifiable flags, and we won't * touch the cs selector. */ int set_mcontext(struct thread *td, mcontext_t *mcp) { struct pcb *pcb; struct trapframe *tp; char *xfpustate; long rflags; int ret; pcb = td->td_pcb; tp = td->td_frame; if (mcp->mc_len != sizeof(*mcp) || (mcp->mc_flags & ~_MC_FLAG_MASK) != 0) return (EINVAL); rflags = (mcp->mc_rflags & PSL_USERCHANGE) | (tp->tf_rflags & ~PSL_USERCHANGE); if (mcp->mc_flags & _MC_HASFPXSTATE) { if (mcp->mc_xfpustate_len > cpu_max_ext_state_size - sizeof(struct savefpu)) return (EINVAL); xfpustate = __builtin_alloca(mcp->mc_xfpustate_len); ret = copyin((void *)mcp->mc_xfpustate, xfpustate, mcp->mc_xfpustate_len); if (ret != 0) return (ret); } else xfpustate = NULL; ret = set_fpcontext(td, mcp, xfpustate, mcp->mc_xfpustate_len); if (ret != 0) return (ret); tp->tf_r15 = mcp->mc_r15; tp->tf_r14 = mcp->mc_r14; tp->tf_r13 = mcp->mc_r13; tp->tf_r12 = mcp->mc_r12; tp->tf_r11 = mcp->mc_r11; tp->tf_r10 = mcp->mc_r10; tp->tf_r9 = mcp->mc_r9; tp->tf_r8 = mcp->mc_r8; tp->tf_rdi = mcp->mc_rdi; tp->tf_rsi = mcp->mc_rsi; tp->tf_rbp = mcp->mc_rbp; tp->tf_rbx = mcp->mc_rbx; tp->tf_rdx = mcp->mc_rdx; tp->tf_rcx = mcp->mc_rcx; tp->tf_rax = mcp->mc_rax; tp->tf_rip = mcp->mc_rip; tp->tf_rflags = rflags; tp->tf_rsp = mcp->mc_rsp; tp->tf_ss = mcp->mc_ss; tp->tf_flags = mcp->mc_flags; if (tp->tf_flags & TF_HASSEGS) { tp->tf_ds = mcp->mc_ds; tp->tf_es = mcp->mc_es; tp->tf_fs = mcp->mc_fs; tp->tf_gs = mcp->mc_gs; } if (mcp->mc_flags & _MC_HASBASES) { pcb->pcb_fsbase = mcp->mc_fsbase; pcb->pcb_gsbase = mcp->mc_gsbase; } set_pcb_flags(pcb, PCB_FULL_IRET); return (0); } static void get_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpusave, size_t xfpusave_len) { size_t max_len, len; mcp->mc_ownedfp = fpugetregs(td); bcopy(get_pcb_user_save_td(td), &mcp->mc_fpstate[0], sizeof(mcp->mc_fpstate)); mcp->mc_fpformat = fpuformat(); if (!use_xsave || xfpusave_len == 0) return; max_len = cpu_max_ext_state_size - sizeof(struct savefpu); len = xfpusave_len; if (len > max_len) { len = max_len; bzero(xfpusave + max_len, len - max_len); } mcp->mc_flags |= _MC_HASFPXSTATE; mcp->mc_xfpustate_len = len; bcopy(get_pcb_user_save_td(td) + 1, xfpusave, len); } static int set_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpustate, size_t xfpustate_len) { struct savefpu *fpstate; int error; if (mcp->mc_fpformat == _MC_FPFMT_NODEV) return (0); else if (mcp->mc_fpformat != _MC_FPFMT_XMM) return (EINVAL); else if (mcp->mc_ownedfp == _MC_FPOWNED_NONE) { /* We don't care what state is left in the FPU or PCB. */ fpstate_drop(td); error = 0; } else if (mcp->mc_ownedfp == _MC_FPOWNED_FPU || mcp->mc_ownedfp == _MC_FPOWNED_PCB) { fpstate = (struct savefpu *)&mcp->mc_fpstate; fpstate->sv_env.en_mxcsr &= cpu_mxcsr_mask; error = fpusetregs(td, fpstate, xfpustate, xfpustate_len); } else return (EINVAL); return (error); } void fpstate_drop(struct thread *td) { KASSERT(PCB_USER_FPU(td->td_pcb), ("fpstate_drop: kernel-owned fpu")); critical_enter(); if (PCPU_GET(fpcurthread) == td) fpudrop(); /* * XXX force a full drop of the fpu. The above only drops it if we * owned it. * * XXX I don't much like fpugetuserregs()'s semantics of doing a full * drop. Dropping only to the pcb matches fnsave's behaviour. * We only need to drop to !PCB_INITDONE in sendsig(). But * sendsig() is the only caller of fpugetuserregs()... perhaps we just * have too many layers. */ clear_pcb_flags(curthread->td_pcb, PCB_FPUINITDONE | PCB_USERFPUINITDONE); critical_exit(); } int fill_dbregs(struct thread *td, struct dbreg *dbregs) { struct pcb *pcb; if (td == NULL) { dbregs->dr[0] = rdr0(); dbregs->dr[1] = rdr1(); dbregs->dr[2] = rdr2(); dbregs->dr[3] = rdr3(); dbregs->dr[6] = rdr6(); dbregs->dr[7] = rdr7(); } else { pcb = td->td_pcb; dbregs->dr[0] = pcb->pcb_dr0; dbregs->dr[1] = pcb->pcb_dr1; dbregs->dr[2] = pcb->pcb_dr2; dbregs->dr[3] = pcb->pcb_dr3; dbregs->dr[6] = pcb->pcb_dr6; dbregs->dr[7] = pcb->pcb_dr7; } dbregs->dr[4] = 0; dbregs->dr[5] = 0; dbregs->dr[8] = 0; dbregs->dr[9] = 0; dbregs->dr[10] = 0; dbregs->dr[11] = 0; dbregs->dr[12] = 0; dbregs->dr[13] = 0; dbregs->dr[14] = 0; dbregs->dr[15] = 0; return (0); } int set_dbregs(struct thread *td, struct dbreg *dbregs) { struct pcb *pcb; int i; if (td == NULL) { load_dr0(dbregs->dr[0]); load_dr1(dbregs->dr[1]); load_dr2(dbregs->dr[2]); load_dr3(dbregs->dr[3]); load_dr6(dbregs->dr[6]); load_dr7(dbregs->dr[7]); } else { /* * Don't let an illegal value for dr7 get set. Specifically, * check for undefined settings. Setting these bit patterns * result in undefined behaviour and can lead to an unexpected * TRCTRAP or a general protection fault right here. * Upper bits of dr6 and dr7 must not be set */ for (i = 0; i < 4; i++) { if (DBREG_DR7_ACCESS(dbregs->dr[7], i) == 0x02) return (EINVAL); if (td->td_frame->tf_cs == _ucode32sel && DBREG_DR7_LEN(dbregs->dr[7], i) == DBREG_DR7_LEN_8) return (EINVAL); } if ((dbregs->dr[6] & 0xffffffff00000000ul) != 0 || (dbregs->dr[7] & 0xffffffff00000000ul) != 0) return (EINVAL); pcb = td->td_pcb; /* * Don't let a process set a breakpoint that is not within the * process's address space. If a process could do this, it * could halt the system by setting a breakpoint in the kernel * (if ddb was enabled). Thus, we need to check to make sure * that no breakpoints are being enabled for addresses outside * process's address space. * * XXX - what about when the watched area of the user's * address space is written into from within the kernel * ... wouldn't that still cause a breakpoint to be generated * from within kernel mode? */ if (DBREG_DR7_ENABLED(dbregs->dr[7], 0)) { /* dr0 is enabled */ if (dbregs->dr[0] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 1)) { /* dr1 is enabled */ if (dbregs->dr[1] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 2)) { /* dr2 is enabled */ if (dbregs->dr[2] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 3)) { /* dr3 is enabled */ if (dbregs->dr[3] >= VM_MAXUSER_ADDRESS) return (EINVAL); } pcb->pcb_dr0 = dbregs->dr[0]; pcb->pcb_dr1 = dbregs->dr[1]; pcb->pcb_dr2 = dbregs->dr[2]; pcb->pcb_dr3 = dbregs->dr[3]; pcb->pcb_dr6 = dbregs->dr[6]; pcb->pcb_dr7 = dbregs->dr[7]; set_pcb_flags(pcb, PCB_DBREGS); } return (0); } void reset_dbregs(void) { load_dr7(0); /* Turn off the control bits first */ load_dr0(0); load_dr1(0); load_dr2(0); load_dr3(0); load_dr6(0); } /* * Return > 0 if a hardware breakpoint has been hit, and the * breakpoint was in user space. Return 0, otherwise. */ int user_dbreg_trap(void) { u_int64_t dr7, dr6; /* debug registers dr6 and dr7 */ u_int64_t bp; /* breakpoint bits extracted from dr6 */ int nbp; /* number of breakpoints that triggered */ caddr_t addr[4]; /* breakpoint addresses */ int i; dr7 = rdr7(); if ((dr7 & 0x000000ff) == 0) { /* * all GE and LE bits in the dr7 register are zero, * thus the trap couldn't have been caused by the * hardware debug registers */ return 0; } nbp = 0; dr6 = rdr6(); bp = dr6 & 0x0000000f; if (!bp) { /* * None of the breakpoint bits are set meaning this * trap was not caused by any of the debug registers */ return 0; } /* * at least one of the breakpoints were hit, check to see * which ones and if any of them are user space addresses */ if (bp & 0x01) { addr[nbp++] = (caddr_t)rdr0(); } if (bp & 0x02) { addr[nbp++] = (caddr_t)rdr1(); } if (bp & 0x04) { addr[nbp++] = (caddr_t)rdr2(); } if (bp & 0x08) { addr[nbp++] = (caddr_t)rdr3(); } for (i = 0; i < nbp; i++) { if (addr[i] < (caddr_t)VM_MAXUSER_ADDRESS) { /* * addr[i] is in user space */ return nbp; } } /* * None of the breakpoints are in user space. */ return 0; } #ifdef KDB /* * Provide inb() and outb() as functions. They are normally only available as * inline functions, thus cannot be called from the debugger. */ /* silence compiler warnings */ u_char inb_(u_short); void outb_(u_short, u_char); u_char inb_(u_short port) { return inb(port); } void outb_(u_short port, u_char data) { outb(port, data); } #endif /* KDB */ Index: stable/10/sys/amd64/include/md_var.h =================================================================== --- stable/10/sys/amd64/include/md_var.h (revision 322204) +++ stable/10/sys/amd64/include/md_var.h (revision 322205) @@ -1,142 +1,143 @@ /*- * Copyright (c) 1995 Bruce D. Evans. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _MACHINE_MD_VAR_H_ #define _MACHINE_MD_VAR_H_ /* * Miscellaneous machine-dependent declarations. */ extern long Maxmem; extern u_int basemem; extern int busdma_swi_pending; extern u_int cpu_exthigh; extern u_int cpu_feature; extern u_int cpu_feature2; extern u_int amd_feature; extern u_int amd_feature2; extern u_int amd_pminfo; extern u_int via_feature_rng; extern u_int via_feature_xcrypt; extern u_int cpu_clflush_line_size; extern u_int cpu_stdext_feature; extern u_int cpu_stdext_feature2; extern u_int cpu_fxsr; extern u_int cpu_high; extern u_int cpu_id; extern u_int cpu_max_ext_state_size; extern u_int cpu_mxcsr_mask; extern u_int cpu_procinfo; extern u_int cpu_procinfo2; extern char cpu_vendor[]; extern u_int cpu_vendor_id; extern u_int cpu_mon_mwait_flags; extern u_int cpu_mon_min_size; extern u_int cpu_mon_max_size; extern u_int cpu_maxphyaddr; extern char ctx_switch_xsave[]; extern u_int hv_high; extern char hv_vendor[]; extern char kstack[]; extern char sigcode[]; extern int szsigcode; extern uint64_t *vm_page_dump; extern int vm_page_dump_size; extern int workaround_erratum383; extern int _udatasel; extern int _ucodesel; extern int _ucode32sel; extern int _ufssel; extern int _ugssel; extern int use_xsave; extern uint64_t xsave_mask; typedef void alias_for_inthand_t(u_int cs, u_int ef, u_int esp, u_int ss); struct pcb; struct savefpu; struct thread; struct reg; struct fpreg; struct dbreg; struct dumperinfo; /* * Returns the maximum physical address that can be used with the * current system. */ static __inline vm_paddr_t cpu_getmaxphyaddr(void) { return ((1ULL << cpu_maxphyaddr) - 1); } void *alloc_fpusave(int flags); void amd64_syscall(struct thread *td, int traced); void busdma_swi(void); void cpu_setregs(void); void doreti_iret(void) __asm(__STRING(doreti_iret)); void doreti_iret_fault(void) __asm(__STRING(doreti_iret_fault)); void ld_ds(void) __asm(__STRING(ld_ds)); void ld_es(void) __asm(__STRING(ld_es)); void ld_fs(void) __asm(__STRING(ld_fs)); void ld_gs(void) __asm(__STRING(ld_gs)); void ld_fsbase(void) __asm(__STRING(ld_fsbase)); void ld_gsbase(void) __asm(__STRING(ld_gsbase)); void ds_load_fault(void) __asm(__STRING(ds_load_fault)); void es_load_fault(void) __asm(__STRING(es_load_fault)); void fs_load_fault(void) __asm(__STRING(fs_load_fault)); void gs_load_fault(void) __asm(__STRING(gs_load_fault)); void fsbase_load_fault(void) __asm(__STRING(fsbase_load_fault)); void gsbase_load_fault(void) __asm(__STRING(gsbase_load_fault)); void dump_add_page(vm_paddr_t); void dump_drop_page(vm_paddr_t); void identify_cpu(void); +void identify_hypervisor(void); void initializecpu(void); void initializecpucache(void); bool fix_cpuid(void); void fillw(int /*u_short*/ pat, void *base, size_t cnt); void fpstate_drop(struct thread *td); int is_physical_memory(vm_paddr_t addr); int isa_nmi(int cd); void panicifcpuunsupported(void); void pagecopy(void *from, void *to); void pagezero(void *addr); void printcpuinfo(void); void setidt(int idx, alias_for_inthand_t *func, int typ, int dpl, int ist); int user_dbreg_trap(void); void minidumpsys(struct dumperinfo *); struct savefpu *get_pcb_user_save_td(struct thread *td); struct savefpu *get_pcb_user_save_pcb(struct pcb *pcb); struct pcb *get_pcb_td(struct thread *td); void amd64_db_resume_dbreg(void); #endif /* !_MACHINE_MD_VAR_H_ */ Index: stable/10/sys/i386/i386/machdep.c =================================================================== --- stable/10/sys/i386/i386/machdep.c (revision 322204) +++ stable/10/sys/i386/i386/machdep.c (revision 322205) @@ -1,4186 +1,4190 @@ /*- * Copyright (c) 1992 Terrence R. Lambert. * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 */ #include __FBSDID("$FreeBSD$"); #include "opt_apic.h" #include "opt_atalk.h" #include "opt_atpic.h" #include "opt_compat.h" #include "opt_cpu.h" #include "opt_ddb.h" #include "opt_inet.h" #include "opt_ipx.h" #include "opt_isa.h" #include "opt_kstack_pages.h" #include "opt_maxmem.h" #include "opt_mp_watchdog.h" #include "opt_npx.h" #include "opt_perfmon.h" #include "opt_platform.h" #include "opt_xbox.h" #include "opt_kdtrace.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef SMP #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #ifndef KDB #error KDB must be enabled in order for DDB to work! #endif #include #include #endif #ifdef PC98 #include #else #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef PERFMON #include #endif #ifdef SMP #include #endif #ifdef FDT #include #endif #ifdef DEV_APIC #include #endif #ifdef DEV_ISA #include #endif #ifdef XBOX #include int arch_i386_is_xbox = 0; uint32_t arch_i386_xbox_memsize = 0; #endif #ifdef XEN /* XEN includes */ #include #include #include #include #include void Xhypervisor_callback(void); void failsafe_callback(void); extern trap_info_t trap_table[]; struct proc_ldt default_proc_ldt; extern int init_first; int running_xen = 1; extern unsigned long physfree; #endif /* XEN */ /* Sanity check for __curthread() */ CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); extern register_t init386(int first); extern void dblfault_handler(void); #define CS_SECURE(cs) (ISPL(cs) == SEL_UPL) #define EFL_SECURE(ef, oef) ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0) #if !defined(CPU_DISABLE_SSE) && defined(I686_CPU) #define CPU_ENABLE_SSE #endif static void cpu_startup(void *); static void fpstate_drop(struct thread *td); static void get_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpusave, size_t xfpusave_len); static int set_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpustate, size_t xfpustate_len); #ifdef CPU_ENABLE_SSE static void set_fpregs_xmm(struct save87 *, struct savexmm *); static void fill_fpregs_xmm(struct savexmm *, struct save87 *); #endif /* CPU_ENABLE_SSE */ SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL); #ifdef DDB extern vm_offset_t ksym_start, ksym_end; #endif /* Intel ICH registers */ #define ICH_PMBASE 0x400 #define ICH_SMI_EN ICH_PMBASE + 0x30 int _udatasel, _ucodesel; u_int basemem; #ifdef PC98 int need_pre_dma_flush; /* If 1, use wbinvd befor DMA transfer. */ int need_post_dma_flush; /* If 1, use invd after DMA transfer. */ static int ispc98 = 1; SYSCTL_INT(_machdep, OID_AUTO, ispc98, CTLFLAG_RD, &ispc98, 0, ""); #endif int cold = 1; #ifdef COMPAT_43 static void osendsig(sig_t catcher, ksiginfo_t *, sigset_t *mask); #endif #ifdef COMPAT_FREEBSD4 static void freebsd4_sendsig(sig_t catcher, ksiginfo_t *, sigset_t *mask); #endif long Maxmem = 0; long realmem = 0; #ifdef PAE FEATURE(pae, "Physical Address Extensions"); #endif /* * The number of PHYSMAP entries must be one less than the number of * PHYSSEG entries because the PHYSMAP entry that spans the largest * physical address that is accessible by ISA DMA is split into two * PHYSSEG entries. */ #define PHYSMAP_SIZE (2 * (VM_PHYSSEG_MAX - 1)) vm_paddr_t phys_avail[PHYSMAP_SIZE + 2]; vm_paddr_t dump_avail[PHYSMAP_SIZE + 2]; /* must be 2 less so 0 0 can signal end of chunks */ #define PHYS_AVAIL_ARRAY_END ((sizeof(phys_avail) / sizeof(phys_avail[0])) - 2) #define DUMP_AVAIL_ARRAY_END ((sizeof(dump_avail) / sizeof(dump_avail[0])) - 2) struct kva_md_info kmi; static struct trapframe proc0_tf; struct pcpu __pcpu[MAXCPU]; struct mtx icu_lock; struct mem_range_softc mem_range_softc; static void cpu_startup(dummy) void *dummy; { uintmax_t memsize; char *sysenv; #ifndef PC98 /* * On MacBooks, we need to disallow the legacy USB circuit to * generate an SMI# because this can cause several problems, * namely: incorrect CPU frequency detection and failure to * start the APs. * We do this by disabling a bit in the SMI_EN (SMI Control and * Enable register) of the Intel ICH LPC Interface Bridge. */ sysenv = getenv("smbios.system.product"); if (sysenv != NULL) { if (strncmp(sysenv, "MacBook1,1", 10) == 0 || strncmp(sysenv, "MacBook3,1", 10) == 0 || strncmp(sysenv, "MacBook4,1", 10) == 0 || strncmp(sysenv, "MacBookPro1,1", 13) == 0 || strncmp(sysenv, "MacBookPro1,2", 13) == 0 || strncmp(sysenv, "MacBookPro3,1", 13) == 0 || strncmp(sysenv, "MacBookPro4,1", 13) == 0 || strncmp(sysenv, "Macmini1,1", 10) == 0) { if (bootverbose) printf("Disabling LEGACY_USB_EN bit on " "Intel ICH.\n"); outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8); } freeenv(sysenv); } #endif /* !PC98 */ /* * Good {morning,afternoon,evening,night}. */ startrtclock(); printcpuinfo(); panicifcpuunsupported(); #ifdef PERFMON perfmon_init(); #endif /* * Display physical memory if SMBIOS reports reasonable amount. */ memsize = 0; sysenv = getenv("smbios.memory.enabled"); if (sysenv != NULL) { memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10; freeenv(sysenv); } if (memsize < ptoa((uintmax_t)cnt.v_free_count)) memsize = ptoa((uintmax_t)Maxmem); printf("real memory = %ju (%ju MB)\n", memsize, memsize >> 20); realmem = atop(memsize); /* * Display any holes after the first chunk of extended memory. */ if (bootverbose) { int indx; printf("Physical memory chunk(s):\n"); for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { vm_paddr_t size; size = phys_avail[indx + 1] - phys_avail[indx]; printf( "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", (uintmax_t)phys_avail[indx], (uintmax_t)phys_avail[indx + 1] - 1, (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); } } vm_ksubmap_init(&kmi); printf("avail memory = %ju (%ju MB)\n", ptoa((uintmax_t)cnt.v_free_count), ptoa((uintmax_t)cnt.v_free_count) / 1048576); /* * Set up buffers, so they can be used to read disk labels. */ bufinit(); vm_pager_bufferinit(); #ifndef XEN cpu_setregs(); #endif } /* * Send an interrupt to process. * * Stack is set up to allow sigcode stored * at top to call routine, followed by call * to sigreturn routine below. After sigreturn * resets the signal mask, the stack, and the * frame pointer, it returns to the user * specified pc, psl. */ #ifdef COMPAT_43 static void osendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) { struct osigframe sf, *fp; struct proc *p; struct thread *td; struct sigacts *psp; struct trapframe *regs; int sig; int oonstack; td = curthread; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); sig = ksi->ksi_signo; psp = p->p_sigacts; mtx_assert(&psp->ps_mtx, MA_OWNED); regs = td->td_frame; oonstack = sigonstack(regs->tf_esp); /* Allocate space for the signal handler context. */ if ((td->td_pflags & TDP_ALTSTACK) && !oonstack && SIGISMEMBER(psp->ps_sigonstack, sig)) { fp = (struct osigframe *)(td->td_sigstk.ss_sp + td->td_sigstk.ss_size - sizeof(struct osigframe)); #if defined(COMPAT_43) td->td_sigstk.ss_flags |= SS_ONSTACK; #endif } else fp = (struct osigframe *)regs->tf_esp - 1; /* Build the argument list for the signal handler. */ sf.sf_signum = sig; sf.sf_scp = (register_t)&fp->sf_siginfo.si_sc; bzero(&sf.sf_siginfo, sizeof(sf.sf_siginfo)); if (SIGISMEMBER(psp->ps_siginfo, sig)) { /* Signal handler installed with SA_SIGINFO. */ sf.sf_arg2 = (register_t)&fp->sf_siginfo; sf.sf_siginfo.si_signo = sig; sf.sf_siginfo.si_code = ksi->ksi_code; sf.sf_ahu.sf_action = (__osiginfohandler_t *)catcher; sf.sf_addr = 0; } else { /* Old FreeBSD-style arguments. */ sf.sf_arg2 = ksi->ksi_code; sf.sf_addr = (register_t)ksi->ksi_addr; sf.sf_ahu.sf_handler = catcher; } mtx_unlock(&psp->ps_mtx); PROC_UNLOCK(p); /* Save most if not all of trap frame. */ sf.sf_siginfo.si_sc.sc_eax = regs->tf_eax; sf.sf_siginfo.si_sc.sc_ebx = regs->tf_ebx; sf.sf_siginfo.si_sc.sc_ecx = regs->tf_ecx; sf.sf_siginfo.si_sc.sc_edx = regs->tf_edx; sf.sf_siginfo.si_sc.sc_esi = regs->tf_esi; sf.sf_siginfo.si_sc.sc_edi = regs->tf_edi; sf.sf_siginfo.si_sc.sc_cs = regs->tf_cs; sf.sf_siginfo.si_sc.sc_ds = regs->tf_ds; sf.sf_siginfo.si_sc.sc_ss = regs->tf_ss; sf.sf_siginfo.si_sc.sc_es = regs->tf_es; sf.sf_siginfo.si_sc.sc_fs = regs->tf_fs; sf.sf_siginfo.si_sc.sc_gs = rgs(); sf.sf_siginfo.si_sc.sc_isp = regs->tf_isp; /* Build the signal context to be used by osigreturn(). */ sf.sf_siginfo.si_sc.sc_onstack = (oonstack) ? 1 : 0; SIG2OSIG(*mask, sf.sf_siginfo.si_sc.sc_mask); sf.sf_siginfo.si_sc.sc_sp = regs->tf_esp; sf.sf_siginfo.si_sc.sc_fp = regs->tf_ebp; sf.sf_siginfo.si_sc.sc_pc = regs->tf_eip; sf.sf_siginfo.si_sc.sc_ps = regs->tf_eflags; sf.sf_siginfo.si_sc.sc_trapno = regs->tf_trapno; sf.sf_siginfo.si_sc.sc_err = regs->tf_err; /* * If we're a vm86 process, we want to save the segment registers. * We also change eflags to be our emulated eflags, not the actual * eflags. */ if (regs->tf_eflags & PSL_VM) { /* XXX confusing names: `tf' isn't a trapframe; `regs' is. */ struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86; sf.sf_siginfo.si_sc.sc_gs = tf->tf_vm86_gs; sf.sf_siginfo.si_sc.sc_fs = tf->tf_vm86_fs; sf.sf_siginfo.si_sc.sc_es = tf->tf_vm86_es; sf.sf_siginfo.si_sc.sc_ds = tf->tf_vm86_ds; if (vm86->vm86_has_vme == 0) sf.sf_siginfo.si_sc.sc_ps = (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) | (vm86->vm86_eflags & (PSL_VIF | PSL_VIP)); /* See sendsig() for comments. */ tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP); } /* * Copy the sigframe out to the user's stack. */ if (copyout(&sf, fp, sizeof(*fp)) != 0) { #ifdef DEBUG printf("process %ld has trashed its stack\n", (long)p->p_pid); #endif PROC_LOCK(p); sigexit(td, SIGILL); } regs->tf_esp = (int)fp; if (p->p_sysent->sv_sigcode_base != 0) { regs->tf_eip = p->p_sysent->sv_sigcode_base + szsigcode - szosigcode; } else { /* a.out sysentvec does not use shared page */ regs->tf_eip = p->p_sysent->sv_psstrings - szosigcode; } regs->tf_eflags &= ~(PSL_T | PSL_D); regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; load_gs(_udatasel); regs->tf_ss = _udatasel; PROC_LOCK(p); mtx_lock(&psp->ps_mtx); } #endif /* COMPAT_43 */ #ifdef COMPAT_FREEBSD4 static void freebsd4_sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) { struct sigframe4 sf, *sfp; struct proc *p; struct thread *td; struct sigacts *psp; struct trapframe *regs; int sig; int oonstack; td = curthread; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); sig = ksi->ksi_signo; psp = p->p_sigacts; mtx_assert(&psp->ps_mtx, MA_OWNED); regs = td->td_frame; oonstack = sigonstack(regs->tf_esp); /* Save user context. */ bzero(&sf, sizeof(sf)); sf.sf_uc.uc_sigmask = *mask; sf.sf_uc.uc_stack = td->td_sigstk; sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; sf.sf_uc.uc_mcontext.mc_gs = rgs(); bcopy(regs, &sf.sf_uc.uc_mcontext.mc_fs, sizeof(*regs)); bzero(sf.sf_uc.uc_mcontext.mc_fpregs, sizeof(sf.sf_uc.uc_mcontext.mc_fpregs)); bzero(sf.sf_uc.uc_mcontext.__spare__, sizeof(sf.sf_uc.uc_mcontext.__spare__)); bzero(sf.sf_uc.__spare__, sizeof(sf.sf_uc.__spare__)); /* Allocate space for the signal handler context. */ if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && SIGISMEMBER(psp->ps_sigonstack, sig)) { sfp = (struct sigframe4 *)(td->td_sigstk.ss_sp + td->td_sigstk.ss_size - sizeof(struct sigframe4)); #if defined(COMPAT_43) td->td_sigstk.ss_flags |= SS_ONSTACK; #endif } else sfp = (struct sigframe4 *)regs->tf_esp - 1; /* Build the argument list for the signal handler. */ sf.sf_signum = sig; sf.sf_ucontext = (register_t)&sfp->sf_uc; bzero(&sf.sf_si, sizeof(sf.sf_si)); if (SIGISMEMBER(psp->ps_siginfo, sig)) { /* Signal handler installed with SA_SIGINFO. */ sf.sf_siginfo = (register_t)&sfp->sf_si; sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; /* Fill in POSIX parts */ sf.sf_si.si_signo = sig; sf.sf_si.si_code = ksi->ksi_code; sf.sf_si.si_addr = ksi->ksi_addr; } else { /* Old FreeBSD-style arguments. */ sf.sf_siginfo = ksi->ksi_code; sf.sf_addr = (register_t)ksi->ksi_addr; sf.sf_ahu.sf_handler = catcher; } mtx_unlock(&psp->ps_mtx); PROC_UNLOCK(p); /* * If we're a vm86 process, we want to save the segment registers. * We also change eflags to be our emulated eflags, not the actual * eflags. */ if (regs->tf_eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86; sf.sf_uc.uc_mcontext.mc_gs = tf->tf_vm86_gs; sf.sf_uc.uc_mcontext.mc_fs = tf->tf_vm86_fs; sf.sf_uc.uc_mcontext.mc_es = tf->tf_vm86_es; sf.sf_uc.uc_mcontext.mc_ds = tf->tf_vm86_ds; if (vm86->vm86_has_vme == 0) sf.sf_uc.uc_mcontext.mc_eflags = (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) | (vm86->vm86_eflags & (PSL_VIF | PSL_VIP)); /* * Clear PSL_NT to inhibit T_TSSFLT faults on return from * syscalls made by the signal handler. This just avoids * wasting time for our lazy fixup of such faults. PSL_NT * does nothing in vm86 mode, but vm86 programs can set it * almost legitimately in probes for old cpu types. */ tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP); } /* * Copy the sigframe out to the user's stack. */ if (copyout(&sf, sfp, sizeof(*sfp)) != 0) { #ifdef DEBUG printf("process %ld has trashed its stack\n", (long)p->p_pid); #endif PROC_LOCK(p); sigexit(td, SIGILL); } regs->tf_esp = (int)sfp; regs->tf_eip = p->p_sysent->sv_sigcode_base + szsigcode - szfreebsd4_sigcode; regs->tf_eflags &= ~(PSL_T | PSL_D); regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; regs->tf_ss = _udatasel; PROC_LOCK(p); mtx_lock(&psp->ps_mtx); } #endif /* COMPAT_FREEBSD4 */ void sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) { struct sigframe sf, *sfp; struct proc *p; struct thread *td; struct sigacts *psp; char *sp; struct trapframe *regs; struct segment_descriptor *sdp; char *xfpusave; size_t xfpusave_len; int sig; int oonstack; td = curthread; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); sig = ksi->ksi_signo; psp = p->p_sigacts; mtx_assert(&psp->ps_mtx, MA_OWNED); #ifdef COMPAT_FREEBSD4 if (SIGISMEMBER(psp->ps_freebsd4, sig)) { freebsd4_sendsig(catcher, ksi, mask); return; } #endif #ifdef COMPAT_43 if (SIGISMEMBER(psp->ps_osigset, sig)) { osendsig(catcher, ksi, mask); return; } #endif regs = td->td_frame; oonstack = sigonstack(regs->tf_esp); #ifdef CPU_ENABLE_SSE if (cpu_max_ext_state_size > sizeof(union savefpu) && use_xsave) { xfpusave_len = cpu_max_ext_state_size - sizeof(union savefpu); xfpusave = __builtin_alloca(xfpusave_len); } else { #else { #endif xfpusave_len = 0; xfpusave = NULL; } /* Save user context. */ bzero(&sf, sizeof(sf)); sf.sf_uc.uc_sigmask = *mask; sf.sf_uc.uc_stack = td->td_sigstk; sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; sf.sf_uc.uc_mcontext.mc_gs = rgs(); bcopy(regs, &sf.sf_uc.uc_mcontext.mc_fs, sizeof(*regs)); sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext); /* magic */ get_fpcontext(td, &sf.sf_uc.uc_mcontext, xfpusave, xfpusave_len); fpstate_drop(td); /* * Unconditionally fill the fsbase and gsbase into the mcontext. */ sdp = &td->td_pcb->pcb_fsd; sf.sf_uc.uc_mcontext.mc_fsbase = sdp->sd_hibase << 24 | sdp->sd_lobase; sdp = &td->td_pcb->pcb_gsd; sf.sf_uc.uc_mcontext.mc_gsbase = sdp->sd_hibase << 24 | sdp->sd_lobase; bzero(sf.sf_uc.uc_mcontext.mc_spare2, sizeof(sf.sf_uc.uc_mcontext.mc_spare2)); bzero(sf.sf_uc.__spare__, sizeof(sf.sf_uc.__spare__)); /* Allocate space for the signal handler context. */ if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && SIGISMEMBER(psp->ps_sigonstack, sig)) { sp = td->td_sigstk.ss_sp + td->td_sigstk.ss_size; #if defined(COMPAT_43) td->td_sigstk.ss_flags |= SS_ONSTACK; #endif } else sp = (char *)regs->tf_esp - 128; if (xfpusave != NULL) { sp -= xfpusave_len; sp = (char *)((unsigned int)sp & ~0x3F); sf.sf_uc.uc_mcontext.mc_xfpustate = (register_t)sp; } sp -= sizeof(struct sigframe); /* Align to 16 bytes. */ sfp = (struct sigframe *)((unsigned int)sp & ~0xF); /* Translate the signal if appropriate. */ if (p->p_sysent->sv_sigtbl && sig <= p->p_sysent->sv_sigsize) sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)]; /* Build the argument list for the signal handler. */ sf.sf_signum = sig; sf.sf_ucontext = (register_t)&sfp->sf_uc; bzero(&sf.sf_si, sizeof(sf.sf_si)); if (SIGISMEMBER(psp->ps_siginfo, sig)) { /* Signal handler installed with SA_SIGINFO. */ sf.sf_siginfo = (register_t)&sfp->sf_si; sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; /* Fill in POSIX parts */ sf.sf_si = ksi->ksi_info; sf.sf_si.si_signo = sig; /* maybe a translated signal */ } else { /* Old FreeBSD-style arguments. */ sf.sf_siginfo = ksi->ksi_code; sf.sf_addr = (register_t)ksi->ksi_addr; sf.sf_ahu.sf_handler = catcher; } mtx_unlock(&psp->ps_mtx); PROC_UNLOCK(p); /* * If we're a vm86 process, we want to save the segment registers. * We also change eflags to be our emulated eflags, not the actual * eflags. */ if (regs->tf_eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86; sf.sf_uc.uc_mcontext.mc_gs = tf->tf_vm86_gs; sf.sf_uc.uc_mcontext.mc_fs = tf->tf_vm86_fs; sf.sf_uc.uc_mcontext.mc_es = tf->tf_vm86_es; sf.sf_uc.uc_mcontext.mc_ds = tf->tf_vm86_ds; if (vm86->vm86_has_vme == 0) sf.sf_uc.uc_mcontext.mc_eflags = (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) | (vm86->vm86_eflags & (PSL_VIF | PSL_VIP)); /* * Clear PSL_NT to inhibit T_TSSFLT faults on return from * syscalls made by the signal handler. This just avoids * wasting time for our lazy fixup of such faults. PSL_NT * does nothing in vm86 mode, but vm86 programs can set it * almost legitimately in probes for old cpu types. */ tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP); } /* * Copy the sigframe out to the user's stack. */ if (copyout(&sf, sfp, sizeof(*sfp)) != 0 || (xfpusave != NULL && copyout(xfpusave, (void *)sf.sf_uc.uc_mcontext.mc_xfpustate, xfpusave_len) != 0)) { #ifdef DEBUG printf("process %ld has trashed its stack\n", (long)p->p_pid); #endif PROC_LOCK(p); sigexit(td, SIGILL); } regs->tf_esp = (int)sfp; regs->tf_eip = p->p_sysent->sv_sigcode_base; if (regs->tf_eip == 0) regs->tf_eip = p->p_sysent->sv_psstrings - szsigcode; regs->tf_eflags &= ~(PSL_T | PSL_D); regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; regs->tf_ss = _udatasel; PROC_LOCK(p); mtx_lock(&psp->ps_mtx); } /* * System call to cleanup state after a signal * has been taken. Reset signal mask and * stack state from context left by sendsig (above). * Return to previous pc and psl as specified by * context left by sendsig. Check carefully to * make sure that the user has not modified the * state to gain improper privileges. * * MPSAFE */ #ifdef COMPAT_43 int osigreturn(td, uap) struct thread *td; struct osigreturn_args /* { struct osigcontext *sigcntxp; } */ *uap; { struct osigcontext sc; struct trapframe *regs; struct osigcontext *scp; int eflags, error; ksiginfo_t ksi; regs = td->td_frame; error = copyin(uap->sigcntxp, &sc, sizeof(sc)); if (error != 0) return (error); scp = ≻ eflags = scp->sc_ps; if (eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86; /* * if pcb_ext == 0 or vm86_inited == 0, the user hasn't * set up the vm86 area, and we can't enter vm86 mode. */ if (td->td_pcb->pcb_ext == 0) return (EINVAL); vm86 = &td->td_pcb->pcb_ext->ext_vm86; if (vm86->vm86_inited == 0) return (EINVAL); /* Go back to user mode if both flags are set. */ if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) { ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); } if (vm86->vm86_has_vme) { eflags = (tf->tf_eflags & ~VME_USERCHANGE) | (eflags & VME_USERCHANGE) | PSL_VM; } else { vm86->vm86_eflags = eflags; /* save VIF, VIP */ eflags = (tf->tf_eflags & ~VM_USERCHANGE) | (eflags & VM_USERCHANGE) | PSL_VM; } tf->tf_vm86_ds = scp->sc_ds; tf->tf_vm86_es = scp->sc_es; tf->tf_vm86_fs = scp->sc_fs; tf->tf_vm86_gs = scp->sc_gs; tf->tf_ds = _udatasel; tf->tf_es = _udatasel; tf->tf_fs = _udatasel; } else { /* * Don't allow users to change privileged or reserved flags. */ if (!EFL_SECURE(eflags, regs->tf_eflags)) { return (EINVAL); } /* * Don't allow users to load a valid privileged %cs. Let the * hardware check for invalid selectors, excess privilege in * other selectors, invalid %eip's and invalid %esp's. */ if (!CS_SECURE(scp->sc_cs)) { ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_trapno = T_PROTFLT; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); return (EINVAL); } regs->tf_ds = scp->sc_ds; regs->tf_es = scp->sc_es; regs->tf_fs = scp->sc_fs; } /* Restore remaining registers. */ regs->tf_eax = scp->sc_eax; regs->tf_ebx = scp->sc_ebx; regs->tf_ecx = scp->sc_ecx; regs->tf_edx = scp->sc_edx; regs->tf_esi = scp->sc_esi; regs->tf_edi = scp->sc_edi; regs->tf_cs = scp->sc_cs; regs->tf_ss = scp->sc_ss; regs->tf_isp = scp->sc_isp; regs->tf_ebp = scp->sc_fp; regs->tf_esp = scp->sc_sp; regs->tf_eip = scp->sc_pc; regs->tf_eflags = eflags; #if defined(COMPAT_43) if (scp->sc_onstack & 1) td->td_sigstk.ss_flags |= SS_ONSTACK; else td->td_sigstk.ss_flags &= ~SS_ONSTACK; #endif kern_sigprocmask(td, SIG_SETMASK, (sigset_t *)&scp->sc_mask, NULL, SIGPROCMASK_OLD); return (EJUSTRETURN); } #endif /* COMPAT_43 */ #ifdef COMPAT_FREEBSD4 /* * MPSAFE */ int freebsd4_sigreturn(td, uap) struct thread *td; struct freebsd4_sigreturn_args /* { const ucontext4 *sigcntxp; } */ *uap; { struct ucontext4 uc; struct trapframe *regs; struct ucontext4 *ucp; int cs, eflags, error; ksiginfo_t ksi; error = copyin(uap->sigcntxp, &uc, sizeof(uc)); if (error != 0) return (error); ucp = &uc; regs = td->td_frame; eflags = ucp->uc_mcontext.mc_eflags; if (eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86; /* * if pcb_ext == 0 or vm86_inited == 0, the user hasn't * set up the vm86 area, and we can't enter vm86 mode. */ if (td->td_pcb->pcb_ext == 0) return (EINVAL); vm86 = &td->td_pcb->pcb_ext->ext_vm86; if (vm86->vm86_inited == 0) return (EINVAL); /* Go back to user mode if both flags are set. */ if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) { ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); } if (vm86->vm86_has_vme) { eflags = (tf->tf_eflags & ~VME_USERCHANGE) | (eflags & VME_USERCHANGE) | PSL_VM; } else { vm86->vm86_eflags = eflags; /* save VIF, VIP */ eflags = (tf->tf_eflags & ~VM_USERCHANGE) | (eflags & VM_USERCHANGE) | PSL_VM; } bcopy(&ucp->uc_mcontext.mc_fs, tf, sizeof(struct trapframe)); tf->tf_eflags = eflags; tf->tf_vm86_ds = tf->tf_ds; tf->tf_vm86_es = tf->tf_es; tf->tf_vm86_fs = tf->tf_fs; tf->tf_vm86_gs = ucp->uc_mcontext.mc_gs; tf->tf_ds = _udatasel; tf->tf_es = _udatasel; tf->tf_fs = _udatasel; } else { /* * Don't allow users to change privileged or reserved flags. */ if (!EFL_SECURE(eflags, regs->tf_eflags)) { uprintf("pid %d (%s): freebsd4_sigreturn eflags = 0x%x\n", td->td_proc->p_pid, td->td_name, eflags); return (EINVAL); } /* * Don't allow users to load a valid privileged %cs. Let the * hardware check for invalid selectors, excess privilege in * other selectors, invalid %eip's and invalid %esp's. */ cs = ucp->uc_mcontext.mc_cs; if (!CS_SECURE(cs)) { uprintf("pid %d (%s): freebsd4_sigreturn cs = 0x%x\n", td->td_proc->p_pid, td->td_name, cs); ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_trapno = T_PROTFLT; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); return (EINVAL); } bcopy(&ucp->uc_mcontext.mc_fs, regs, sizeof(*regs)); } #if defined(COMPAT_43) if (ucp->uc_mcontext.mc_onstack & 1) td->td_sigstk.ss_flags |= SS_ONSTACK; else td->td_sigstk.ss_flags &= ~SS_ONSTACK; #endif kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0); return (EJUSTRETURN); } #endif /* COMPAT_FREEBSD4 */ /* * MPSAFE */ int sys_sigreturn(td, uap) struct thread *td; struct sigreturn_args /* { const struct __ucontext *sigcntxp; } */ *uap; { ucontext_t uc; struct proc *p; struct trapframe *regs; ucontext_t *ucp; char *xfpustate; size_t xfpustate_len; int cs, eflags, error, ret; ksiginfo_t ksi; p = td->td_proc; error = copyin(uap->sigcntxp, &uc, sizeof(uc)); if (error != 0) return (error); ucp = &uc; if ((ucp->uc_mcontext.mc_flags & ~_MC_FLAG_MASK) != 0) { uprintf("pid %d (%s): sigreturn mc_flags %x\n", p->p_pid, td->td_name, ucp->uc_mcontext.mc_flags); return (EINVAL); } regs = td->td_frame; eflags = ucp->uc_mcontext.mc_eflags; if (eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86; /* * if pcb_ext == 0 or vm86_inited == 0, the user hasn't * set up the vm86 area, and we can't enter vm86 mode. */ if (td->td_pcb->pcb_ext == 0) return (EINVAL); vm86 = &td->td_pcb->pcb_ext->ext_vm86; if (vm86->vm86_inited == 0) return (EINVAL); /* Go back to user mode if both flags are set. */ if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) { ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); } if (vm86->vm86_has_vme) { eflags = (tf->tf_eflags & ~VME_USERCHANGE) | (eflags & VME_USERCHANGE) | PSL_VM; } else { vm86->vm86_eflags = eflags; /* save VIF, VIP */ eflags = (tf->tf_eflags & ~VM_USERCHANGE) | (eflags & VM_USERCHANGE) | PSL_VM; } bcopy(&ucp->uc_mcontext.mc_fs, tf, sizeof(struct trapframe)); tf->tf_eflags = eflags; tf->tf_vm86_ds = tf->tf_ds; tf->tf_vm86_es = tf->tf_es; tf->tf_vm86_fs = tf->tf_fs; tf->tf_vm86_gs = ucp->uc_mcontext.mc_gs; tf->tf_ds = _udatasel; tf->tf_es = _udatasel; tf->tf_fs = _udatasel; } else { /* * Don't allow users to change privileged or reserved flags. */ if (!EFL_SECURE(eflags, regs->tf_eflags)) { uprintf("pid %d (%s): sigreturn eflags = 0x%x\n", td->td_proc->p_pid, td->td_name, eflags); return (EINVAL); } /* * Don't allow users to load a valid privileged %cs. Let the * hardware check for invalid selectors, excess privilege in * other selectors, invalid %eip's and invalid %esp's. */ cs = ucp->uc_mcontext.mc_cs; if (!CS_SECURE(cs)) { uprintf("pid %d (%s): sigreturn cs = 0x%x\n", td->td_proc->p_pid, td->td_name, cs); ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_trapno = T_PROTFLT; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); return (EINVAL); } if ((uc.uc_mcontext.mc_flags & _MC_HASFPXSTATE) != 0) { xfpustate_len = uc.uc_mcontext.mc_xfpustate_len; if (xfpustate_len > cpu_max_ext_state_size - sizeof(union savefpu)) { uprintf( "pid %d (%s): sigreturn xfpusave_len = 0x%zx\n", p->p_pid, td->td_name, xfpustate_len); return (EINVAL); } xfpustate = __builtin_alloca(xfpustate_len); error = copyin((const void *)uc.uc_mcontext.mc_xfpustate, xfpustate, xfpustate_len); if (error != 0) { uprintf( "pid %d (%s): sigreturn copying xfpustate failed\n", p->p_pid, td->td_name); return (error); } } else { xfpustate = NULL; xfpustate_len = 0; } ret = set_fpcontext(td, &ucp->uc_mcontext, xfpustate, xfpustate_len); if (ret != 0) return (ret); bcopy(&ucp->uc_mcontext.mc_fs, regs, sizeof(*regs)); } #if defined(COMPAT_43) if (ucp->uc_mcontext.mc_onstack & 1) td->td_sigstk.ss_flags |= SS_ONSTACK; else td->td_sigstk.ss_flags &= ~SS_ONSTACK; #endif kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0); return (EJUSTRETURN); } /* * Machine dependent boot() routine * * I haven't seen anything to put here yet * Possibly some stuff might be grafted back here from boot() */ void cpu_boot(int howto) { } /* * Flush the D-cache for non-DMA I/O so that the I-cache can * be made coherent later. */ void cpu_flush_dcache(void *ptr, size_t len) { /* Not applicable */ } /* Get current clock frequency for the given cpu id. */ int cpu_est_clockrate(int cpu_id, uint64_t *rate) { uint64_t tsc1, tsc2; uint64_t acnt, mcnt, perf; register_t reg; if (pcpu_find(cpu_id) == NULL || rate == NULL) return (EINVAL); if ((cpu_feature & CPUID_TSC) == 0) return (EOPNOTSUPP); /* * If TSC is P-state invariant and APERF/MPERF MSRs do not exist, * DELAY(9) based logic fails. */ if (tsc_is_invariant && !tsc_perf_stat) return (EOPNOTSUPP); #ifdef SMP if (smp_cpus > 1) { /* Schedule ourselves on the indicated cpu. */ thread_lock(curthread); sched_bind(curthread, cpu_id); thread_unlock(curthread); } #endif /* Calibrate by measuring a short delay. */ reg = intr_disable(); if (tsc_is_invariant) { wrmsr(MSR_MPERF, 0); wrmsr(MSR_APERF, 0); tsc1 = rdtsc(); DELAY(1000); mcnt = rdmsr(MSR_MPERF); acnt = rdmsr(MSR_APERF); tsc2 = rdtsc(); intr_restore(reg); perf = 1000 * acnt / mcnt; *rate = (tsc2 - tsc1) * perf; } else { tsc1 = rdtsc(); DELAY(1000); tsc2 = rdtsc(); intr_restore(reg); *rate = (tsc2 - tsc1) * 1000; } #ifdef SMP if (smp_cpus > 1) { thread_lock(curthread); sched_unbind(curthread); thread_unlock(curthread); } #endif return (0); } #ifdef XEN static void idle_block(void) { HYPERVISOR_sched_op(SCHEDOP_block, 0); } void cpu_halt(void) { HYPERVISOR_shutdown(SHUTDOWN_poweroff); } int scheduler_running; static void cpu_idle_hlt(sbintime_t sbt) { scheduler_running = 1; enable_intr(); idle_block(); } #else /* * Shutdown the CPU as much as possible */ void cpu_halt(void) { for (;;) halt(); } #endif void (*cpu_idle_hook)(sbintime_t) = NULL; /* ACPI idle hook. */ static int cpu_ident_amdc1e = 0; /* AMD C1E supported. */ static int idle_mwait = 1; /* Use MONITOR/MWAIT for short idle. */ TUNABLE_INT("machdep.idle_mwait", &idle_mwait); SYSCTL_INT(_machdep, OID_AUTO, idle_mwait, CTLFLAG_RW, &idle_mwait, 0, "Use MONITOR/MWAIT for short idle"); #define STATE_RUNNING 0x0 #define STATE_MWAIT 0x1 #define STATE_SLEEPING 0x2 #ifndef PC98 static void cpu_idle_acpi(sbintime_t sbt) { int *state; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_SLEEPING; /* See comments in cpu_idle_hlt(). */ disable_intr(); if (sched_runnable()) enable_intr(); else if (cpu_idle_hook) cpu_idle_hook(sbt); else __asm __volatile("sti; hlt"); *state = STATE_RUNNING; } #endif /* !PC98 */ #ifndef XEN static void cpu_idle_hlt(sbintime_t sbt) { int *state; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_SLEEPING; /* * Since we may be in a critical section from cpu_idle(), if * an interrupt fires during that critical section we may have * a pending preemption. If the CPU halts, then that thread * may not execute until a later interrupt awakens the CPU. * To handle this race, check for a runnable thread after * disabling interrupts and immediately return if one is * found. Also, we must absolutely guarentee that hlt is * the next instruction after sti. This ensures that any * interrupt that fires after the call to disable_intr() will * immediately awaken the CPU from hlt. Finally, please note * that on x86 this works fine because of interrupts enabled only * after the instruction following sti takes place, while IF is set * to 1 immediately, allowing hlt instruction to acknowledge the * interrupt. */ disable_intr(); if (sched_runnable()) enable_intr(); else __asm __volatile("sti; hlt"); *state = STATE_RUNNING; } #endif static void cpu_idle_mwait(sbintime_t sbt) { int *state; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_MWAIT; /* See comments in cpu_idle_hlt(). */ disable_intr(); if (sched_runnable()) { enable_intr(); *state = STATE_RUNNING; return; } cpu_monitor(state, 0, 0); if (*state == STATE_MWAIT) __asm __volatile("sti; mwait" : : "a" (MWAIT_C1), "c" (0)); else enable_intr(); *state = STATE_RUNNING; } static void cpu_idle_spin(sbintime_t sbt) { int *state; int i; state = (int *)PCPU_PTR(monitorbuf); *state = STATE_RUNNING; /* * The sched_runnable() call is racy but as long as there is * a loop missing it one time will have just a little impact if any * (and it is much better than missing the check at all). */ for (i = 0; i < 1000; i++) { if (sched_runnable()) return; cpu_spinwait(); } } /* * C1E renders the local APIC timer dead, so we disable it by * reading the Interrupt Pending Message register and clearing * both C1eOnCmpHalt (bit 28) and SmiOnCmpHalt (bit 27). * * Reference: * "BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors" * #32559 revision 3.00+ */ #define MSR_AMDK8_IPM 0xc0010055 #define AMDK8_SMIONCMPHALT (1ULL << 27) #define AMDK8_C1EONCMPHALT (1ULL << 28) #define AMDK8_CMPHALT (AMDK8_SMIONCMPHALT | AMDK8_C1EONCMPHALT) static void cpu_probe_amdc1e(void) { /* * Detect the presence of C1E capability mostly on latest * dual-cores (or future) k8 family. */ if (cpu_vendor_id == CPU_VENDOR_AMD && (cpu_id & 0x00000f00) == 0x00000f00 && (cpu_id & 0x0fff0000) >= 0x00040000) { cpu_ident_amdc1e = 1; } } #if defined(PC98) || defined(XEN) void (*cpu_idle_fn)(sbintime_t) = cpu_idle_hlt; #else void (*cpu_idle_fn)(sbintime_t) = cpu_idle_acpi; #endif void cpu_idle(int busy) { #ifndef XEN uint64_t msr; #endif sbintime_t sbt = -1; CTR2(KTR_SPARE2, "cpu_idle(%d) at %d", busy, curcpu); #if defined(MP_WATCHDOG) && !defined(XEN) ap_watchdog(PCPU_GET(cpuid)); #endif #ifndef XEN /* If we are busy - try to use fast methods. */ if (busy) { if ((cpu_feature2 & CPUID2_MON) && idle_mwait) { cpu_idle_mwait(busy); goto out; } } #endif /* If we have time - switch timers into idle mode. */ if (!busy) { critical_enter(); sbt = cpu_idleclock(); } #ifndef XEN /* Apply AMD APIC timer C1E workaround. */ if (cpu_ident_amdc1e && cpu_disable_c3_sleep) { msr = rdmsr(MSR_AMDK8_IPM); if (msr & AMDK8_CMPHALT) wrmsr(MSR_AMDK8_IPM, msr & ~AMDK8_CMPHALT); } #endif /* Call main idle method. */ cpu_idle_fn(sbt); /* Switch timers mack into active mode. */ if (!busy) { cpu_activeclock(); critical_exit(); } #ifndef XEN out: #endif CTR2(KTR_SPARE2, "cpu_idle(%d) at %d done", busy, curcpu); } int cpu_idle_wakeup(int cpu) { struct pcpu *pcpu; int *state; pcpu = pcpu_find(cpu); state = (int *)pcpu->pc_monitorbuf; /* * This doesn't need to be atomic since missing the race will * simply result in unnecessary IPIs. */ if (*state == STATE_SLEEPING) return (0); if (*state == STATE_MWAIT) *state = STATE_RUNNING; return (1); } /* * Ordered by speed/power consumption. */ struct { void *id_fn; char *id_name; } idle_tbl[] = { { cpu_idle_spin, "spin" }, { cpu_idle_mwait, "mwait" }, { cpu_idle_hlt, "hlt" }, #ifndef PC98 { cpu_idle_acpi, "acpi" }, #endif { NULL, NULL } }; static int idle_sysctl_available(SYSCTL_HANDLER_ARGS) { char *avail, *p; int error; int i; avail = malloc(256, M_TEMP, M_WAITOK); p = avail; for (i = 0; idle_tbl[i].id_name != NULL; i++) { if (strstr(idle_tbl[i].id_name, "mwait") && (cpu_feature2 & CPUID2_MON) == 0) continue; #ifndef PC98 if (strcmp(idle_tbl[i].id_name, "acpi") == 0 && cpu_idle_hook == NULL) continue; #endif p += sprintf(p, "%s%s", p != avail ? ", " : "", idle_tbl[i].id_name); } error = sysctl_handle_string(oidp, avail, 0, req); free(avail, M_TEMP); return (error); } SYSCTL_PROC(_machdep, OID_AUTO, idle_available, CTLTYPE_STRING | CTLFLAG_RD, 0, 0, idle_sysctl_available, "A", "list of available idle functions"); static int idle_sysctl(SYSCTL_HANDLER_ARGS) { char buf[16]; int error; char *p; int i; p = "unknown"; for (i = 0; idle_tbl[i].id_name != NULL; i++) { if (idle_tbl[i].id_fn == cpu_idle_fn) { p = idle_tbl[i].id_name; break; } } strncpy(buf, p, sizeof(buf)); error = sysctl_handle_string(oidp, buf, sizeof(buf), req); if (error != 0 || req->newptr == NULL) return (error); for (i = 0; idle_tbl[i].id_name != NULL; i++) { if (strstr(idle_tbl[i].id_name, "mwait") && (cpu_feature2 & CPUID2_MON) == 0) continue; #ifndef PC98 if (strcmp(idle_tbl[i].id_name, "acpi") == 0 && cpu_idle_hook == NULL) continue; #endif if (strcmp(idle_tbl[i].id_name, buf)) continue; cpu_idle_fn = idle_tbl[i].id_fn; return (0); } return (EINVAL); } SYSCTL_PROC(_machdep, OID_AUTO, idle, CTLTYPE_STRING | CTLFLAG_RW, 0, 0, idle_sysctl, "A", "currently selected idle function"); /* * Reset registers to default values on exec. */ void exec_setregs(struct thread *td, struct image_params *imgp, u_long stack) { struct trapframe *regs = td->td_frame; struct pcb *pcb = td->td_pcb; /* Reset pc->pcb_gs and %gs before possibly invalidating it. */ pcb->pcb_gs = _udatasel; load_gs(_udatasel); mtx_lock_spin(&dt_lock); if (td->td_proc->p_md.md_ldt) user_ldt_free(td); else mtx_unlock_spin(&dt_lock); bzero((char *)regs, sizeof(struct trapframe)); regs->tf_eip = imgp->entry_addr; regs->tf_esp = stack; regs->tf_eflags = PSL_USER | (regs->tf_eflags & PSL_T); regs->tf_ss = _udatasel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; regs->tf_cs = _ucodesel; /* PS_STRINGS value for BSD/OS binaries. It is 0 for non-BSD/OS. */ regs->tf_ebx = imgp->ps_strings; /* * Reset the hardware debug registers if they were in use. * They won't have any meaning for the newly exec'd process. */ if (pcb->pcb_flags & PCB_DBREGS) { pcb->pcb_dr0 = 0; pcb->pcb_dr1 = 0; pcb->pcb_dr2 = 0; pcb->pcb_dr3 = 0; pcb->pcb_dr6 = 0; pcb->pcb_dr7 = 0; if (pcb == curpcb) { /* * Clear the debug registers on the running * CPU, otherwise they will end up affecting * the next process we switch to. */ reset_dbregs(); } pcb->pcb_flags &= ~PCB_DBREGS; } pcb->pcb_initial_npxcw = __INITIAL_NPXCW__; /* * Drop the FP state if we hold it, so that the process gets a * clean FP state if it uses the FPU again. */ fpstate_drop(td); /* * XXX - Linux emulator * Make sure sure edx is 0x0 on entry. Linux binaries depend * on it. */ td->td_retval[1] = 0; } void cpu_setregs(void) { unsigned int cr0; cr0 = rcr0(); /* * CR0_MP, CR0_NE and CR0_TS are set for NPX (FPU) support: * * Prepare to trap all ESC (i.e., NPX) instructions and all WAIT * instructions. We must set the CR0_MP bit and use the CR0_TS * bit to control the trap, because setting the CR0_EM bit does * not cause WAIT instructions to trap. It's important to trap * WAIT instructions - otherwise the "wait" variants of no-wait * control instructions would degenerate to the "no-wait" variants * after FP context switches but work correctly otherwise. It's * particularly important to trap WAITs when there is no NPX - * otherwise the "wait" variants would always degenerate. * * Try setting CR0_NE to get correct error reporting on 486DX's. * Setting it should fail or do nothing on lesser processors. */ cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; load_cr0(cr0); load_gs(_udatasel); } u_long bootdev; /* not a struct cdev *- encoding is different */ SYSCTL_ULONG(_machdep, OID_AUTO, guessed_bootdev, CTLFLAG_RD, &bootdev, 0, "Maybe the Boot device (not in struct cdev *format)"); static char bootmethod[16] = "BIOS"; SYSCTL_STRING(_machdep, OID_AUTO, bootmethod, CTLFLAG_RD, bootmethod, 0, "System firmware boot method"); /* * Initialize 386 and configure to run kernel */ /* * Initialize segments & interrupt table */ int _default_ldt; #ifdef XEN union descriptor *gdt; union descriptor *ldt; #else union descriptor gdt[NGDT * MAXCPU]; /* global descriptor table */ union descriptor ldt[NLDT]; /* local descriptor table */ #endif static struct gate_descriptor idt0[NIDT]; struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ struct region_descriptor r_gdt, r_idt; /* table descriptors */ struct mtx dt_lock; /* lock for GDT and LDT */ static struct i386tss dblfault_tss; static char dblfault_stack[PAGE_SIZE]; extern vm_offset_t proc0kstack; /* * software prototypes -- in more palatable form. * * GCODE_SEL through GUDATA_SEL must be in this order for syscall/sysret * GUFS_SEL and GUGS_SEL must be in this order (swtch.s knows it) */ struct soft_segment_descriptor gdt_segs[] = { /* GNULL_SEL 0 Null Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = SEL_KPL, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GPRIV_SEL 1 SMP Per-Processor Private Data Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUFS_SEL 2 %fs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUGS_SEL 3 %gs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GCODE_SEL 4 Code Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GDATA_SEL 5 Data Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUCODE_SEL 6 Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUDATA_SEL 7 Data Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GBIOSLOWMEM_SEL 8 BIOS access to realmode segment 0x40, must be #8 in GDT */ { .ssd_base = 0x400, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, #ifndef XEN /* GPROC0_SEL 9 Proc 0 Tss Descriptor */ { .ssd_base = 0x0, .ssd_limit = sizeof(struct i386tss)-1, .ssd_type = SDT_SYS386TSS, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GLDT_SEL 10 LDT Descriptor */ { .ssd_base = (int) ldt, .ssd_limit = sizeof(ldt)-1, .ssd_type = SDT_SYSLDT, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUSERLDT_SEL 11 User LDT Descriptor per process */ { .ssd_base = (int) ldt, .ssd_limit = (512 * sizeof(union descriptor)-1), .ssd_type = SDT_SYSLDT, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GPANIC_SEL 12 Panic Tss Descriptor */ { .ssd_base = (int) &dblfault_tss, .ssd_limit = sizeof(struct i386tss)-1, .ssd_type = SDT_SYS386TSS, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GBIOSCODE32_SEL 13 BIOS 32-bit interface (32bit Code) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GBIOSCODE16_SEL 14 BIOS 32-bit interface (16bit Code) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GBIOSDATA_SEL 15 BIOS 32-bit interface (Data) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GBIOSUTIL_SEL 16 BIOS 16-bit interface (Utility) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GBIOSARGS_SEL 17 BIOS 16-bit interface (Arguments) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GNDIS_SEL 18 NDIS Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, #endif /* !XEN */ }; static struct soft_segment_descriptor ldt_segs[] = { /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Data Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, }; void setidt(idx, func, typ, dpl, selec) int idx; inthand_t *func; int typ; int dpl; int selec; { struct gate_descriptor *ip; ip = idt + idx; ip->gd_looffset = (int)func; ip->gd_selector = selec; ip->gd_stkcpy = 0; ip->gd_xx = 0; ip->gd_type = typ; ip->gd_dpl = dpl; ip->gd_p = 1; ip->gd_hioffset = ((int)func)>>16 ; } extern inthand_t IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), IDTVEC(xmm), #ifdef KDTRACE_HOOKS IDTVEC(dtrace_ret), #endif #ifdef XENHVM IDTVEC(xen_intr_upcall), #endif IDTVEC(lcall_syscall), IDTVEC(int0x80_syscall); #ifdef DDB /* * Display the index and function name of any IDT entries that don't use * the default 'rsvd' entry point. */ DB_SHOW_COMMAND(idt, db_show_idt) { struct gate_descriptor *ip; int idx; uintptr_t func; ip = idt; for (idx = 0; idx < NIDT && !db_pager_quit; idx++) { func = (ip->gd_hioffset << 16 | ip->gd_looffset); if (func != (uintptr_t)&IDTVEC(rsvd)) { db_printf("%3d\t", idx); db_printsym(func, DB_STGY_PROC); db_printf("\n"); } ip++; } } /* Show privileged registers. */ DB_SHOW_COMMAND(sysregs, db_show_sysregs) { uint64_t idtr, gdtr; idtr = ridt(); db_printf("idtr\t0x%08x/%04x\n", (u_int)(idtr >> 16), (u_int)idtr & 0xffff); gdtr = rgdt(); db_printf("gdtr\t0x%08x/%04x\n", (u_int)(gdtr >> 16), (u_int)gdtr & 0xffff); db_printf("ldtr\t0x%04x\n", rldt()); db_printf("tr\t0x%04x\n", rtr()); db_printf("cr0\t0x%08x\n", rcr0()); db_printf("cr2\t0x%08x\n", rcr2()); db_printf("cr3\t0x%08x\n", rcr3()); db_printf("cr4\t0x%08x\n", rcr4()); if (rcr4() & CR4_XSAVE) db_printf("xcr0\t0x%016llx\n", rxcr(0)); if (amd_feature & (AMDID_NX | AMDID_LM)) db_printf("EFER\t0x%016llx\n", rdmsr(MSR_EFER)); if (cpu_feature2 & (CPUID2_VMX | CPUID2_SMX)) db_printf("FEATURES_CTL\t0x%016llx\n", rdmsr(MSR_IA32_FEATURE_CONTROL)); if ((cpu_vendor_id == CPU_VENDOR_INTEL || cpu_vendor_id == CPU_VENDOR_AMD) && CPUID_TO_FAMILY(cpu_id) >= 6) db_printf("DEBUG_CTL\t0x%016llx\n", rdmsr(MSR_DEBUGCTLMSR)); if (cpu_feature & CPUID_PAT) db_printf("PAT\t0x%016llx\n", rdmsr(MSR_PAT)); } DB_SHOW_COMMAND(dbregs, db_show_dbregs) { db_printf("dr0\t0x%08x\n", rdr0()); db_printf("dr1\t0x%08x\n", rdr1()); db_printf("dr2\t0x%08x\n", rdr2()); db_printf("dr3\t0x%08x\n", rdr3()); db_printf("dr6\t0x%08x\n", rdr6()); db_printf("dr7\t0x%08x\n", rdr7()); } #endif void sdtossd(sd, ssd) struct segment_descriptor *sd; struct soft_segment_descriptor *ssd; { ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; ssd->ssd_type = sd->sd_type; ssd->ssd_dpl = sd->sd_dpl; ssd->ssd_p = sd->sd_p; ssd->ssd_def32 = sd->sd_def32; ssd->ssd_gran = sd->sd_gran; } #if !defined(PC98) && !defined(XEN) static int add_smap_entry(struct bios_smap *smap, vm_paddr_t *physmap, int *physmap_idxp) { int i, insert_idx, physmap_idx; physmap_idx = *physmap_idxp; if (boothowto & RB_VERBOSE) printf("SMAP type=%02x base=%016llx len=%016llx\n", smap->type, smap->base, smap->length); if (smap->type != SMAP_TYPE_MEMORY) return (1); if (smap->length == 0) return (1); #ifndef PAE if (smap->base > 0xffffffff) { printf("%uK of memory above 4GB ignored\n", (u_int)(smap->length / 1024)); return (1); } #endif /* * Find insertion point while checking for overlap. Start off by * assuming the new entry will be added to the end. */ insert_idx = physmap_idx + 2; for (i = 0; i <= physmap_idx; i += 2) { if (smap->base < physmap[i + 1]) { if (smap->base + smap->length <= physmap[i]) { insert_idx = i; break; } if (boothowto & RB_VERBOSE) printf( "Overlapping memory regions, ignoring second region\n"); return (1); } } /* See if we can prepend to the next entry. */ if (insert_idx <= physmap_idx && smap->base + smap->length == physmap[insert_idx]) { physmap[insert_idx] = smap->base; return (1); } /* See if we can append to the previous entry. */ if (insert_idx > 0 && smap->base == physmap[insert_idx - 1]) { physmap[insert_idx - 1] += smap->length; return (1); } physmap_idx += 2; *physmap_idxp = physmap_idx; if (physmap_idx == PHYSMAP_SIZE) { printf( "Too many segments in the physical address map, giving up\n"); return (0); } /* * Move the last 'N' entries down to make room for the new * entry if needed. */ for (i = physmap_idx; i > insert_idx; i -= 2) { physmap[i] = physmap[i - 2]; physmap[i + 1] = physmap[i - 1]; } /* Insert the new entry. */ physmap[insert_idx] = smap->base; physmap[insert_idx + 1] = smap->base + smap->length; return (1); } #endif /* !PC98 && !XEN */ #ifndef XEN static void basemem_setup(void) { vm_paddr_t pa; pt_entry_t *pte; int i; if (basemem > 640) { printf("Preposterous BIOS basemem of %uK, truncating to 640K\n", basemem); basemem = 640; } /* * XXX if biosbasemem is now < 640, there is a `hole' * between the end of base memory and the start of * ISA memory. The hole may be empty or it may * contain BIOS code or data. Map it read/write so * that the BIOS can write to it. (Memory from 0 to * the physical end of the kernel is mapped read-only * to begin with and then parts of it are remapped. * The parts that aren't remapped form holes that * remain read-only and are unused by the kernel. * The base memory area is below the physical end of * the kernel and right now forms a read-only hole. * The part of it from PAGE_SIZE to * (trunc_page(biosbasemem * 1024) - 1) will be * remapped and used by the kernel later.) * * This code is similar to the code used in * pmap_mapdev, but since no memory needs to be * allocated we simply change the mapping. */ for (pa = trunc_page(basemem * 1024); pa < ISA_HOLE_START; pa += PAGE_SIZE) pmap_kenter(KERNBASE + pa, pa); /* * Map pages between basemem and ISA_HOLE_START, if any, r/w into * the vm86 page table so that vm86 can scribble on them using * the vm86 map too. XXX: why 2 ways for this and only 1 way for * page 0, at least as initialized here? */ pte = (pt_entry_t *)vm86paddr; for (i = basemem / 4; i < 160; i++) pte[i] = (i << PAGE_SHIFT) | PG_V | PG_RW | PG_U; } #endif /* !XEN */ /* * Populate the (physmap) array with base/bound pairs describing the * available physical memory in the system, then test this memory and * build the phys_avail array describing the actually-available memory. * * If we cannot accurately determine the physical memory map, then use * value from the 0xE801 call, and failing that, the RTC. * * Total memory size may be set by the kernel environment variable * hw.physmem or the compile-time define MAXMEM. * * XXX first should be vm_paddr_t. */ #ifdef PC98 static void getmemsize(int first) { int off, physmap_idx, pa_indx, da_indx; u_long physmem_tunable, memtest; vm_paddr_t physmap[PHYSMAP_SIZE]; pt_entry_t *pte; quad_t dcons_addr, dcons_size; int i; int pg_n; u_int extmem; u_int under16; vm_paddr_t pa; bzero(physmap, sizeof(physmap)); /* XXX - some of EPSON machines can't use PG_N */ pg_n = PG_N; if (pc98_machine_type & M_EPSON_PC98) { switch (epson_machine_id) { #ifdef WB_CACHE default: #endif case EPSON_PC486_HX: case EPSON_PC486_HG: case EPSON_PC486_HA: pg_n = 0; break; } } under16 = pc98_getmemsize(&basemem, &extmem); basemem_setup(); physmap[0] = 0; physmap[1] = basemem * 1024; physmap_idx = 2; physmap[physmap_idx] = 0x100000; physmap[physmap_idx + 1] = physmap[physmap_idx] + extmem * 1024; /* * Now, physmap contains a map of physical memory. */ #ifdef SMP /* make hole for AP bootstrap code */ physmap[1] = mp_bootaddress(physmap[1]); #endif /* * Maxmem isn't the "maximum memory", it's one larger than the * highest page of the physical address space. It should be * called something like "Maxphyspage". We may adjust this * based on ``hw.physmem'' and the results of the memory test. */ Maxmem = atop(physmap[physmap_idx + 1]); #ifdef MAXMEM Maxmem = MAXMEM / 4; #endif if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable)) Maxmem = atop(physmem_tunable); /* * By default keep the memtest enabled. Use a general name so that * one could eventually do more with the code than just disable it. */ memtest = 1; TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest); if (atop(physmap[physmap_idx + 1]) != Maxmem && (boothowto & RB_VERBOSE)) printf("Physical memory use set to %ldK\n", Maxmem * 4); /* * If Maxmem has been increased beyond what the system has detected, * extend the last memory segment to the new limit. */ if (atop(physmap[physmap_idx + 1]) < Maxmem) physmap[physmap_idx + 1] = ptoa((vm_paddr_t)Maxmem); /* * We need to divide chunk if Maxmem is larger than 16MB and * under 16MB area is not full of memory. * (1) system area (15-16MB region) is cut off * (2) extended memory is only over 16MB area (ex. Melco "HYPERMEMORY") */ if ((under16 != 16 * 1024) && (extmem > 15 * 1024)) { /* 15M - 16M region is cut off, so need to divide chunk */ physmap[physmap_idx + 1] = under16 * 1024; physmap_idx += 2; physmap[physmap_idx] = 0x1000000; physmap[physmap_idx + 1] = physmap[2] + extmem * 1024; } /* call pmap initialization to make new kernel address space */ pmap_bootstrap(first); /* * Size up each available chunk of physical memory. */ physmap[0] = PAGE_SIZE; /* mask off page 0 */ pa_indx = 0; da_indx = 1; phys_avail[pa_indx++] = physmap[0]; phys_avail[pa_indx] = physmap[0]; dump_avail[da_indx] = physmap[0]; pte = CMAP3; /* * Get dcons buffer address */ if (getenv_quad("dcons.addr", &dcons_addr) == 0 || getenv_quad("dcons.size", &dcons_size) == 0) dcons_addr = 0; /* * physmap is in bytes, so when converting to page boundaries, * round up the start address and round down the end address. */ for (i = 0; i <= physmap_idx; i += 2) { vm_paddr_t end; end = ptoa((vm_paddr_t)Maxmem); if (physmap[i + 1] < end) end = trunc_page(physmap[i + 1]); for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { int tmp, page_bad, full; int *ptr = (int *)CADDR3; full = FALSE; /* * block out kernel memory as not available. */ if (pa >= KERNLOAD && pa < first) goto do_dump_avail; /* * block out dcons buffer */ if (dcons_addr > 0 && pa >= trunc_page(dcons_addr) && pa < dcons_addr + dcons_size) goto do_dump_avail; page_bad = FALSE; if (memtest == 0) goto skip_memtest; /* * map page into kernel: valid, read/write,non-cacheable */ *pte = pa | PG_V | PG_RW | pg_n; invltlb(); tmp = *(int *)ptr; /* * Test for alternating 1's and 0's */ *(volatile int *)ptr = 0xaaaaaaaa; if (*(volatile int *)ptr != 0xaaaaaaaa) page_bad = TRUE; /* * Test for alternating 0's and 1's */ *(volatile int *)ptr = 0x55555555; if (*(volatile int *)ptr != 0x55555555) page_bad = TRUE; /* * Test for all 1's */ *(volatile int *)ptr = 0xffffffff; if (*(volatile int *)ptr != 0xffffffff) page_bad = TRUE; /* * Test for all 0's */ *(volatile int *)ptr = 0x0; if (*(volatile int *)ptr != 0x0) page_bad = TRUE; /* * Restore original value. */ *(int *)ptr = tmp; skip_memtest: /* * Adjust array of valid/good pages. */ if (page_bad == TRUE) continue; /* * If this good page is a continuation of the * previous set of good pages, then just increase * the end pointer. Otherwise start a new chunk. * Note that "end" points one higher than end, * making the range >= start and < end. * If we're also doing a speculative memory * test and we at or past the end, bump up Maxmem * so that we keep going. The first bad page * will terminate the loop. */ if (phys_avail[pa_indx] == pa) { phys_avail[pa_indx] += PAGE_SIZE; } else { pa_indx++; if (pa_indx == PHYS_AVAIL_ARRAY_END) { printf( "Too many holes in the physical address space, giving up\n"); pa_indx--; full = TRUE; goto do_dump_avail; } phys_avail[pa_indx++] = pa; /* start */ phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ } physmem++; do_dump_avail: if (dump_avail[da_indx] == pa) { dump_avail[da_indx] += PAGE_SIZE; } else { da_indx++; if (da_indx == DUMP_AVAIL_ARRAY_END) { da_indx--; goto do_next; } dump_avail[da_indx++] = pa; /* start */ dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ } do_next: if (full) break; } } *pte = 0; invltlb(); /* * XXX * The last chunk must contain at least one page plus the message * buffer to avoid complicating other code (message buffer address * calculation, etc.). */ while (phys_avail[pa_indx - 1] + PAGE_SIZE + round_page(msgbufsize) >= phys_avail[pa_indx]) { physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); phys_avail[pa_indx--] = 0; phys_avail[pa_indx--] = 0; } Maxmem = atop(phys_avail[pa_indx]); /* Trim off space for the message buffer. */ phys_avail[pa_indx] -= round_page(msgbufsize); /* Map the message buffer. */ for (off = 0; off < round_page(msgbufsize); off += PAGE_SIZE) pmap_kenter((vm_offset_t)msgbufp + off, phys_avail[pa_indx] + off); PT_UPDATES_FLUSH(); } #else /* PC98 */ static void getmemsize(int first) { int has_smap, off, physmap_idx, pa_indx, da_indx; u_long physmem_tunable, memtest; vm_paddr_t physmap[PHYSMAP_SIZE]; pt_entry_t *pte; quad_t dcons_addr, dcons_size; #ifndef XEN int hasbrokenint12, i, res; u_int extmem; struct vm86frame vmf; struct vm86context vmc; vm_paddr_t pa; struct bios_smap *smap, *smapbase, *smapend; u_int32_t smapsize; caddr_t kmdp; #endif has_smap = 0; #if defined(XEN) Maxmem = xen_start_info->nr_pages - init_first; physmem = Maxmem; basemem = 0; physmap[0] = init_first << PAGE_SHIFT; physmap[1] = ptoa(Maxmem) - round_page(msgbufsize); physmap_idx = 0; #else #ifdef XBOX if (arch_i386_is_xbox) { /* * We queried the memory size before, so chop off 4MB for * the framebuffer and inform the OS of this. */ physmap[0] = 0; physmap[1] = (arch_i386_xbox_memsize * 1024 * 1024) - XBOX_FB_SIZE; physmap_idx = 0; goto physmap_done; } #endif bzero(&vmf, sizeof(vmf)); bzero(physmap, sizeof(physmap)); basemem = 0; /* * Check if the loader supplied an SMAP memory map. If so, * use that and do not make any VM86 calls. */ physmap_idx = 0; smapbase = NULL; kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf32 kernel"); if (kmdp != NULL) smapbase = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (smapbase != NULL) { /* * subr_module.c says: * "Consumer may safely assume that size value precedes data." * ie: an int32_t immediately precedes SMAP. */ smapsize = *((u_int32_t *)smapbase - 1); smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize); has_smap = 1; for (smap = smapbase; smap < smapend; smap++) if (!add_smap_entry(smap, physmap, &physmap_idx)) break; goto have_smap; } /* * Some newer BIOSes have a broken INT 12H implementation * which causes a kernel panic immediately. In this case, we * need use the SMAP to determine the base memory size. */ hasbrokenint12 = 0; TUNABLE_INT_FETCH("hw.hasbrokenint12", &hasbrokenint12); if (hasbrokenint12 == 0) { /* Use INT12 to determine base memory size. */ vm86_intcall(0x12, &vmf); basemem = vmf.vmf_ax; basemem_setup(); } /* * Fetch the memory map with INT 15:E820. Map page 1 R/W into * the kernel page table so we can use it as a buffer. The * kernel will unmap this page later. */ pmap_kenter(KERNBASE + (1 << PAGE_SHIFT), 1 << PAGE_SHIFT); vmc.npages = 0; smap = (void *)vm86_addpage(&vmc, 1, KERNBASE + (1 << PAGE_SHIFT)); res = vm86_getptr(&vmc, (vm_offset_t)smap, &vmf.vmf_es, &vmf.vmf_di); KASSERT(res != 0, ("vm86_getptr() failed: address not found")); vmf.vmf_ebx = 0; do { vmf.vmf_eax = 0xE820; vmf.vmf_edx = SMAP_SIG; vmf.vmf_ecx = sizeof(struct bios_smap); i = vm86_datacall(0x15, &vmf, &vmc); if (i || vmf.vmf_eax != SMAP_SIG) break; has_smap = 1; if (!add_smap_entry(smap, physmap, &physmap_idx)) break; } while (vmf.vmf_ebx != 0); have_smap: /* * If we didn't fetch the "base memory" size from INT12, * figure it out from the SMAP (or just guess). */ if (basemem == 0) { for (i = 0; i <= physmap_idx; i += 2) { if (physmap[i] == 0x00000000) { basemem = physmap[i + 1] / 1024; break; } } /* XXX: If we couldn't find basemem from SMAP, just guess. */ if (basemem == 0) basemem = 640; basemem_setup(); } if (physmap[1] != 0) goto physmap_done; /* * If we failed to find an SMAP, figure out the extended * memory size. We will then build a simple memory map with * two segments, one for "base memory" and the second for * "extended memory". Note that "extended memory" starts at a * physical address of 1MB and that both basemem and extmem * are in units of 1KB. * * First, try to fetch the extended memory size via INT 15:E801. */ vmf.vmf_ax = 0xE801; if (vm86_intcall(0x15, &vmf) == 0) { extmem = vmf.vmf_cx + vmf.vmf_dx * 64; } else { /* * If INT15:E801 fails, this is our last ditch effort * to determine the extended memory size. Currently * we prefer the RTC value over INT15:88. */ #if 0 vmf.vmf_ah = 0x88; vm86_intcall(0x15, &vmf); extmem = vmf.vmf_ax; #else extmem = rtcin(RTC_EXTLO) + (rtcin(RTC_EXTHI) << 8); #endif } /* * Special hack for chipsets that still remap the 384k hole when * there's 16MB of memory - this really confuses people that * are trying to use bus mastering ISA controllers with the * "16MB limit"; they only have 16MB, but the remapping puts * them beyond the limit. * * If extended memory is between 15-16MB (16-17MB phys address range), * chop it to 15MB. */ if ((extmem > 15 * 1024) && (extmem < 16 * 1024)) extmem = 15 * 1024; physmap[0] = 0; physmap[1] = basemem * 1024; physmap_idx = 2; physmap[physmap_idx] = 0x100000; physmap[physmap_idx + 1] = physmap[physmap_idx] + extmem * 1024; physmap_done: #endif /* * Now, physmap contains a map of physical memory. */ #ifdef SMP /* make hole for AP bootstrap code */ physmap[1] = mp_bootaddress(physmap[1]); #endif /* * Maxmem isn't the "maximum memory", it's one larger than the * highest page of the physical address space. It should be * called something like "Maxphyspage". We may adjust this * based on ``hw.physmem'' and the results of the memory test. */ Maxmem = atop(physmap[physmap_idx + 1]); #ifdef MAXMEM Maxmem = MAXMEM / 4; #endif if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable)) Maxmem = atop(physmem_tunable); /* * If we have an SMAP, don't allow MAXMEM or hw.physmem to extend * the amount of memory in the system. */ if (has_smap && Maxmem > atop(physmap[physmap_idx + 1])) Maxmem = atop(physmap[physmap_idx + 1]); /* * By default enable the memory test on real hardware, and disable * it if we appear to be running in a VM. This avoids touching all * pages unnecessarily, which doesn't matter on real hardware but is * bad for shared VM hosts. Use a general name so that * one could eventually do more with the code than just disable it. */ memtest = (vm_guest > VM_GUEST_NO) ? 0 : 1; TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest); if (atop(physmap[physmap_idx + 1]) != Maxmem && (boothowto & RB_VERBOSE)) printf("Physical memory use set to %ldK\n", Maxmem * 4); /* * If Maxmem has been increased beyond what the system has detected, * extend the last memory segment to the new limit. */ if (atop(physmap[physmap_idx + 1]) < Maxmem) physmap[physmap_idx + 1] = ptoa((vm_paddr_t)Maxmem); /* call pmap initialization to make new kernel address space */ pmap_bootstrap(first); /* * Size up each available chunk of physical memory. */ physmap[0] = PAGE_SIZE; /* mask off page 0 */ pa_indx = 0; da_indx = 1; phys_avail[pa_indx++] = physmap[0]; phys_avail[pa_indx] = physmap[0]; dump_avail[da_indx] = physmap[0]; pte = CMAP3; /* * Get dcons buffer address */ if (getenv_quad("dcons.addr", &dcons_addr) == 0 || getenv_quad("dcons.size", &dcons_size) == 0) dcons_addr = 0; #ifndef XEN /* * physmap is in bytes, so when converting to page boundaries, * round up the start address and round down the end address. */ for (i = 0; i <= physmap_idx; i += 2) { vm_paddr_t end; end = ptoa((vm_paddr_t)Maxmem); if (physmap[i + 1] < end) end = trunc_page(physmap[i + 1]); for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { int tmp, page_bad, full; int *ptr = (int *)CADDR3; full = FALSE; /* * block out kernel memory as not available. */ if (pa >= KERNLOAD && pa < first) goto do_dump_avail; /* * block out dcons buffer */ if (dcons_addr > 0 && pa >= trunc_page(dcons_addr) && pa < dcons_addr + dcons_size) goto do_dump_avail; page_bad = FALSE; if (memtest == 0) goto skip_memtest; /* * map page into kernel: valid, read/write,non-cacheable */ *pte = pa | PG_V | PG_RW | PG_N; invltlb(); tmp = *(int *)ptr; /* * Test for alternating 1's and 0's */ *(volatile int *)ptr = 0xaaaaaaaa; if (*(volatile int *)ptr != 0xaaaaaaaa) page_bad = TRUE; /* * Test for alternating 0's and 1's */ *(volatile int *)ptr = 0x55555555; if (*(volatile int *)ptr != 0x55555555) page_bad = TRUE; /* * Test for all 1's */ *(volatile int *)ptr = 0xffffffff; if (*(volatile int *)ptr != 0xffffffff) page_bad = TRUE; /* * Test for all 0's */ *(volatile int *)ptr = 0x0; if (*(volatile int *)ptr != 0x0) page_bad = TRUE; /* * Restore original value. */ *(int *)ptr = tmp; skip_memtest: /* * Adjust array of valid/good pages. */ if (page_bad == TRUE) continue; /* * If this good page is a continuation of the * previous set of good pages, then just increase * the end pointer. Otherwise start a new chunk. * Note that "end" points one higher than end, * making the range >= start and < end. * If we're also doing a speculative memory * test and we at or past the end, bump up Maxmem * so that we keep going. The first bad page * will terminate the loop. */ if (phys_avail[pa_indx] == pa) { phys_avail[pa_indx] += PAGE_SIZE; } else { pa_indx++; if (pa_indx == PHYS_AVAIL_ARRAY_END) { printf( "Too many holes in the physical address space, giving up\n"); pa_indx--; full = TRUE; goto do_dump_avail; } phys_avail[pa_indx++] = pa; /* start */ phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ } physmem++; do_dump_avail: if (dump_avail[da_indx] == pa) { dump_avail[da_indx] += PAGE_SIZE; } else { da_indx++; if (da_indx == DUMP_AVAIL_ARRAY_END) { da_indx--; goto do_next; } dump_avail[da_indx++] = pa; /* start */ dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ } do_next: if (full) break; } } *pte = 0; invltlb(); #else phys_avail[0] = physfree; phys_avail[1] = xen_start_info->nr_pages*PAGE_SIZE; dump_avail[0] = 0; dump_avail[1] = xen_start_info->nr_pages*PAGE_SIZE; #endif /* * XXX * The last chunk must contain at least one page plus the message * buffer to avoid complicating other code (message buffer address * calculation, etc.). */ while (phys_avail[pa_indx - 1] + PAGE_SIZE + round_page(msgbufsize) >= phys_avail[pa_indx]) { physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); phys_avail[pa_indx--] = 0; phys_avail[pa_indx--] = 0; } Maxmem = atop(phys_avail[pa_indx]); /* Trim off space for the message buffer. */ phys_avail[pa_indx] -= round_page(msgbufsize); /* Map the message buffer. */ for (off = 0; off < round_page(msgbufsize); off += PAGE_SIZE) pmap_kenter((vm_offset_t)msgbufp + off, phys_avail[pa_indx] + off); PT_UPDATES_FLUSH(); } #endif /* PC98 */ #ifdef XEN #define MTOPSIZE (1<<(14 + PAGE_SHIFT)) register_t init386(first) int first; { unsigned long gdtmachpfn; int error, gsel_tss, metadata_missing, x, pa; struct pcpu *pc; #ifdef CPU_ENABLE_SSE struct xstate_hdr *xhdr; #endif struct callback_register event = { .type = CALLBACKTYPE_event, .address = {GSEL(GCODE_SEL, SEL_KPL), (unsigned long)Xhypervisor_callback }, }; struct callback_register failsafe = { .type = CALLBACKTYPE_failsafe, .address = {GSEL(GCODE_SEL, SEL_KPL), (unsigned long)failsafe_callback }, }; thread0.td_kstack = proc0kstack; thread0.td_kstack_pages = KSTACK_PAGES; /* * This may be done better later if it gets more high level * components in it. If so just link td->td_proc here. */ proc_linkup0(&proc0, &thread0); metadata_missing = 0; if (xen_start_info->mod_start) { preload_metadata = (caddr_t)xen_start_info->mod_start; preload_bootstrap_relocate(KERNBASE); } else { metadata_missing = 1; } if (envmode == 1) kern_envp = static_env; else if ((caddr_t)xen_start_info->cmd_line) kern_envp = xen_setbootenv((caddr_t)xen_start_info->cmd_line); boothowto |= xen_boothowto(kern_envp); /* Init basic tunables, hz etc */ init_param1(); /* * XEN occupies a portion of the upper virtual address space * At its base it manages an array mapping machine page frames * to physical page frames - hence we need to be able to * access 4GB - (64MB - 4MB + 64k) */ gdt_segs[GPRIV_SEL].ssd_limit = atop(HYPERVISOR_VIRT_START + MTOPSIZE); gdt_segs[GUFS_SEL].ssd_limit = atop(HYPERVISOR_VIRT_START + MTOPSIZE); gdt_segs[GUGS_SEL].ssd_limit = atop(HYPERVISOR_VIRT_START + MTOPSIZE); gdt_segs[GCODE_SEL].ssd_limit = atop(HYPERVISOR_VIRT_START + MTOPSIZE); gdt_segs[GDATA_SEL].ssd_limit = atop(HYPERVISOR_VIRT_START + MTOPSIZE); gdt_segs[GUCODE_SEL].ssd_limit = atop(HYPERVISOR_VIRT_START + MTOPSIZE); gdt_segs[GUDATA_SEL].ssd_limit = atop(HYPERVISOR_VIRT_START + MTOPSIZE); gdt_segs[GBIOSLOWMEM_SEL].ssd_limit = atop(HYPERVISOR_VIRT_START + MTOPSIZE); pc = &__pcpu[0]; gdt_segs[GPRIV_SEL].ssd_base = (int) pc; gdt_segs[GPROC0_SEL].ssd_base = (int) &pc->pc_common_tss; PT_SET_MA(gdt, xpmap_ptom(VTOP(gdt)) | PG_V | PG_RW); bzero(gdt, PAGE_SIZE); for (x = 0; x < NGDT; x++) ssdtosd(&gdt_segs[x], &gdt[x].sd); mtx_init(&dt_lock, "descriptor tables", NULL, MTX_SPIN); gdtmachpfn = vtomach(gdt) >> PAGE_SHIFT; PT_SET_MA(gdt, xpmap_ptom(VTOP(gdt)) | PG_V); PANIC_IF(HYPERVISOR_set_gdt(&gdtmachpfn, 512) != 0); lgdt(&r_gdt); gdtset = 1; if ((error = HYPERVISOR_set_trap_table(trap_table)) != 0) { panic("set_trap_table failed - error %d\n", error); } error = HYPERVISOR_callback_op(CALLBACKOP_register, &event); if (error == 0) error = HYPERVISOR_callback_op(CALLBACKOP_register, &failsafe); #if CONFIG_XEN_COMPAT <= 0x030002 if (error == -ENOXENSYS) HYPERVISOR_set_callbacks(GSEL(GCODE_SEL, SEL_KPL), (unsigned long)Xhypervisor_callback, GSEL(GCODE_SEL, SEL_KPL), (unsigned long)failsafe_callback); #endif pcpu_init(pc, 0, sizeof(struct pcpu)); for (pa = first; pa < first + DPCPU_SIZE; pa += PAGE_SIZE) pmap_kenter(pa + KERNBASE, pa); dpcpu_init((void *)(first + KERNBASE), 0); first += DPCPU_SIZE; physfree += DPCPU_SIZE; init_first += DPCPU_SIZE / PAGE_SIZE; PCPU_SET(prvspace, pc); PCPU_SET(curthread, &thread0); /* * Initialize mutexes. * * icu_lock: in order to allow an interrupt to occur in a critical * section, to set pcpu->ipending (etc...) properly, we * must be able to get the icu lock, so it can't be * under witness. */ mutex_init(); mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS | MTX_NOPROFILE); /* make ldt memory segments */ PT_SET_MA(ldt, xpmap_ptom(VTOP(ldt)) | PG_V | PG_RW); bzero(ldt, PAGE_SIZE); ldt_segs[LUCODE_SEL].ssd_limit = atop(0 - 1); ldt_segs[LUDATA_SEL].ssd_limit = atop(0 - 1); for (x = 0; x < sizeof ldt_segs / sizeof ldt_segs[0]; x++) ssdtosd(&ldt_segs[x], &ldt[x].sd); default_proc_ldt.ldt_base = (caddr_t)ldt; default_proc_ldt.ldt_len = 6; _default_ldt = (int)&default_proc_ldt; PCPU_SET(currentldt, _default_ldt); PT_SET_MA(ldt, *vtopte((unsigned long)ldt) & ~PG_RW); xen_set_ldt((unsigned long) ldt, (sizeof ldt_segs / sizeof ldt_segs[0])); #if defined(XEN_PRIVILEGED) /* * Initialize the i8254 before the console so that console * initialization can use DELAY(). */ i8254_init(); #endif /* * Initialize the console before we print anything out. */ cninit(); if (metadata_missing) printf("WARNING: loader(8) metadata is missing!\n"); #ifdef DEV_ISA #ifdef DEV_ATPIC elcr_probe(); atpic_startup(); #else /* Reset and mask the atpics and leave them shut down. */ atpic_reset(); /* * Point the ICU spurious interrupt vectors at the APIC spurious * interrupt handler. */ setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); #endif #endif #ifdef DDB ksym_start = bootinfo.bi_symtab; ksym_end = bootinfo.bi_esymtab; #endif kdb_init(); #ifdef KDB if (boothowto & RB_KDB) kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger"); #endif finishidentcpu(); /* Final stage of CPU initialization */ setidt(IDT_UD, &IDTVEC(ill), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_GP, &IDTVEC(prot), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); initializecpu(); /* Initialize CPU registers */ initializecpucache(); /* pointer to selector slot for %fs/%gs */ PCPU_SET(fsgs_gdt, &gdt[GUFS_SEL].sd); dblfault_tss.tss_esp = dblfault_tss.tss_esp0 = dblfault_tss.tss_esp1 = dblfault_tss.tss_esp2 = (int)&dblfault_stack[sizeof(dblfault_stack)]; dblfault_tss.tss_ss = dblfault_tss.tss_ss0 = dblfault_tss.tss_ss1 = dblfault_tss.tss_ss2 = GSEL(GDATA_SEL, SEL_KPL); #if defined(PAE) || defined(PAE_TABLES) dblfault_tss.tss_cr3 = (int)IdlePDPT; #else dblfault_tss.tss_cr3 = (int)IdlePTD; #endif dblfault_tss.tss_eip = (int)dblfault_handler; dblfault_tss.tss_eflags = PSL_KERNEL; dblfault_tss.tss_ds = dblfault_tss.tss_es = dblfault_tss.tss_gs = GSEL(GDATA_SEL, SEL_KPL); dblfault_tss.tss_fs = GSEL(GPRIV_SEL, SEL_KPL); dblfault_tss.tss_cs = GSEL(GCODE_SEL, SEL_KPL); dblfault_tss.tss_ldt = GSEL(GLDT_SEL, SEL_KPL); vm86_initialize(); getmemsize(first); init_param2(physmem); /* now running on new page tables, configured,and u/iom is accessible */ msgbufinit(msgbufp, msgbufsize); #ifdef DEV_NPX npxinit(true); #endif /* * Set up thread0 pcb after npxinit calculated pcb + fpu save * area size. Zero out the extended state header in fpu save * area. */ thread0.td_pcb = get_pcb_td(&thread0); bzero(get_pcb_user_save_td(&thread0), cpu_max_ext_state_size); #ifdef CPU_ENABLE_SSE if (use_xsave) { xhdr = (struct xstate_hdr *)(get_pcb_user_save_td(&thread0) + 1); xhdr->xstate_bv = xsave_mask; } #endif PCPU_SET(curpcb, thread0.td_pcb); /* make an initial tss so cpu can get interrupt stack on syscall! */ /* Note: -16 is so we can grow the trapframe if we came from vm86 */ PCPU_SET(common_tss.tss_esp0, (vm_offset_t)thread0.td_pcb - 16); PCPU_SET(common_tss.tss_ss0, GSEL(GDATA_SEL, SEL_KPL)); gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); HYPERVISOR_stack_switch(GSEL(GDATA_SEL, SEL_KPL), PCPU_GET(common_tss.tss_esp0)); /* transfer to user mode */ _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); _udatasel = GSEL(GUDATA_SEL, SEL_UPL); /* setup proc 0's pcb */ thread0.td_pcb->pcb_flags = 0; #if defined(PAE) || defined(PAE_TABLES) thread0.td_pcb->pcb_cr3 = (int)IdlePDPT; #else thread0.td_pcb->pcb_cr3 = (int)IdlePTD; #endif thread0.td_pcb->pcb_ext = 0; thread0.td_frame = &proc0_tf; thread0.td_pcb->pcb_fsd = PCPU_GET(fsgs_gdt)[0]; thread0.td_pcb->pcb_gsd = PCPU_GET(fsgs_gdt)[1]; cpu_probe_amdc1e(); /* Location of kernel stack for locore */ return ((register_t)thread0.td_pcb); } #else register_t init386(int first) { struct gate_descriptor *gdp; int gsel_tss, metadata_missing, x, pa; struct pcpu *pc; #ifdef CPU_ENABLE_SSE struct xstate_hdr *xhdr; #endif thread0.td_kstack = proc0kstack; thread0.td_kstack_pages = TD0_KSTACK_PAGES; /* * This may be done better later if it gets more high level * components in it. If so just link td->td_proc here. */ proc_linkup0(&proc0, &thread0); #ifdef PC98 /* * Initialize DMAC */ pc98_init_dmac(); #endif metadata_missing = 0; if (bootinfo.bi_modulep) { preload_metadata = (caddr_t)bootinfo.bi_modulep + KERNBASE; preload_bootstrap_relocate(KERNBASE); } else { metadata_missing = 1; } if (bootinfo.bi_envp) init_static_kenv((caddr_t)bootinfo.bi_envp + KERNBASE, 0); else init_static_kenv(NULL, 0); +#ifndef XEN + identify_hypervisor(); +#endif + /* Init basic tunables, hz etc */ init_param1(); /* * Make gdt memory segments. All segments cover the full 4GB * of address space and permissions are enforced at page level. */ gdt_segs[GCODE_SEL].ssd_limit = atop(0 - 1); gdt_segs[GDATA_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUCODE_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUDATA_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUFS_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUGS_SEL].ssd_limit = atop(0 - 1); pc = &__pcpu[0]; gdt_segs[GPRIV_SEL].ssd_limit = atop(0 - 1); gdt_segs[GPRIV_SEL].ssd_base = (int) pc; gdt_segs[GPROC0_SEL].ssd_base = (int) &pc->pc_common_tss; for (x = 0; x < NGDT; x++) ssdtosd(&gdt_segs[x], &gdt[x].sd); r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; r_gdt.rd_base = (int) gdt; mtx_init(&dt_lock, "descriptor tables", NULL, MTX_SPIN); lgdt(&r_gdt); pcpu_init(pc, 0, sizeof(struct pcpu)); for (pa = first; pa < first + DPCPU_SIZE; pa += PAGE_SIZE) pmap_kenter(pa + KERNBASE, pa); dpcpu_init((void *)(first + KERNBASE), 0); first += DPCPU_SIZE; PCPU_SET(prvspace, pc); PCPU_SET(curthread, &thread0); /* * Initialize mutexes. * * icu_lock: in order to allow an interrupt to occur in a critical * section, to set pcpu->ipending (etc...) properly, we * must be able to get the icu lock, so it can't be * under witness. */ mutex_init(); mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS | MTX_NOPROFILE); /* make ldt memory segments */ ldt_segs[LUCODE_SEL].ssd_limit = atop(0 - 1); ldt_segs[LUDATA_SEL].ssd_limit = atop(0 - 1); for (x = 0; x < sizeof ldt_segs / sizeof ldt_segs[0]; x++) ssdtosd(&ldt_segs[x], &ldt[x].sd); _default_ldt = GSEL(GLDT_SEL, SEL_KPL); lldt(_default_ldt); PCPU_SET(currentldt, _default_ldt); /* exceptions */ for (x = 0; x < NIDT; x++) setidt(x, &IDTVEC(rsvd), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DE, &IDTVEC(div), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DB, &IDTVEC(dbg), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_BP, &IDTVEC(bpt), SDT_SYS386IGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_OF, &IDTVEC(ofl), SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_BR, &IDTVEC(bnd), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_UD, &IDTVEC(ill), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NM, &IDTVEC(dna), SDT_SYS386TGT, SEL_KPL , GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DF, 0, SDT_SYSTASKGT, SEL_KPL, GSEL(GPANIC_SEL, SEL_KPL)); setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_TS, &IDTVEC(tss), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NP, &IDTVEC(missing), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_SS, &IDTVEC(stk), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_GP, &IDTVEC(prot), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_PF, &IDTVEC(page), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_MF, &IDTVEC(fpu), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_AC, &IDTVEC(align), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_MC, &IDTVEC(mchk), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_XF, &IDTVEC(xmm), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_SYSCALL, &IDTVEC(int0x80_syscall), SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); #ifdef KDTRACE_HOOKS setidt(IDT_DTRACE_RET, &IDTVEC(dtrace_ret), SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); #endif #ifdef XENHVM setidt(IDT_EVTCHN, &IDTVEC(xen_intr_upcall), SDT_SYS386IGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); #endif r_idt.rd_limit = sizeof(idt0) - 1; r_idt.rd_base = (int) idt; lidt(&r_idt); #ifdef XBOX /* * The following code queries the PCI ID of 0:0:0. For the XBOX, * This should be 0x10de / 0x02a5. * * This is exactly what Linux does. */ outl(0xcf8, 0x80000000); if (inl(0xcfc) == 0x02a510de) { arch_i386_is_xbox = 1; pic16l_setled(XBOX_LED_GREEN); /* * We are an XBOX, but we may have either 64MB or 128MB of * memory. The PCI host bridge should be programmed for this, * so we just query it. */ outl(0xcf8, 0x80000084); arch_i386_xbox_memsize = (inl(0xcfc) == 0x7FFFFFF) ? 128 : 64; } #endif /* XBOX */ /* * Initialize the i8254 before the console so that console * initialization can use DELAY(). */ i8254_init(); finishidentcpu(); /* Final stage of CPU initialization */ setidt(IDT_UD, &IDTVEC(ill), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_GP, &IDTVEC(prot), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); initializecpu(); /* Initialize CPU registers */ initializecpucache(); /* pointer to selector slot for %fs/%gs */ PCPU_SET(fsgs_gdt, &gdt[GUFS_SEL].sd); dblfault_tss.tss_esp = dblfault_tss.tss_esp0 = dblfault_tss.tss_esp1 = dblfault_tss.tss_esp2 = (int)&dblfault_stack[sizeof(dblfault_stack)]; dblfault_tss.tss_ss = dblfault_tss.tss_ss0 = dblfault_tss.tss_ss1 = dblfault_tss.tss_ss2 = GSEL(GDATA_SEL, SEL_KPL); #if defined(PAE) || defined(PAE_TABLES) dblfault_tss.tss_cr3 = (int)IdlePDPT; #else dblfault_tss.tss_cr3 = (int)IdlePTD; #endif dblfault_tss.tss_eip = (int)dblfault_handler; dblfault_tss.tss_eflags = PSL_KERNEL; dblfault_tss.tss_ds = dblfault_tss.tss_es = dblfault_tss.tss_gs = GSEL(GDATA_SEL, SEL_KPL); dblfault_tss.tss_fs = GSEL(GPRIV_SEL, SEL_KPL); dblfault_tss.tss_cs = GSEL(GCODE_SEL, SEL_KPL); dblfault_tss.tss_ldt = GSEL(GLDT_SEL, SEL_KPL); vm86_initialize(); getmemsize(first); init_param2(physmem); /* now running on new page tables, configured,and u/iom is accessible */ /* * Initialize the console before we print anything out. */ cninit(); if (metadata_missing) printf("WARNING: loader(8) metadata is missing!\n"); #ifdef DEV_ISA #ifdef DEV_ATPIC #ifndef PC98 elcr_probe(); #endif atpic_startup(); #else /* Reset and mask the atpics and leave them shut down. */ atpic_reset(); /* * Point the ICU spurious interrupt vectors at the APIC spurious * interrupt handler. */ setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); #endif #endif #ifdef DDB ksym_start = bootinfo.bi_symtab; ksym_end = bootinfo.bi_esymtab; #endif kdb_init(); #ifdef KDB if (boothowto & RB_KDB) kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger"); #endif msgbufinit(msgbufp, msgbufsize); #ifdef DEV_NPX npxinit(true); #endif /* * Set up thread0 pcb after npxinit calculated pcb + fpu save * area size. Zero out the extended state header in fpu save * area. */ thread0.td_pcb = get_pcb_td(&thread0); thread0.td_pcb->pcb_save = get_pcb_user_save_td(&thread0); bzero(get_pcb_user_save_td(&thread0), cpu_max_ext_state_size); #ifdef CPU_ENABLE_SSE if (use_xsave) { xhdr = (struct xstate_hdr *)(get_pcb_user_save_td(&thread0) + 1); xhdr->xstate_bv = xsave_mask; } #endif PCPU_SET(curpcb, thread0.td_pcb); /* make an initial tss so cpu can get interrupt stack on syscall! */ /* Note: -16 is so we can grow the trapframe if we came from vm86 */ PCPU_SET(common_tss.tss_esp0, (vm_offset_t)thread0.td_pcb - 16); PCPU_SET(common_tss.tss_ss0, GSEL(GDATA_SEL, SEL_KPL)); gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); PCPU_SET(tss_gdt, &gdt[GPROC0_SEL].sd); PCPU_SET(common_tssd, *PCPU_GET(tss_gdt)); PCPU_SET(common_tss.tss_ioopt, (sizeof (struct i386tss)) << 16); ltr(gsel_tss); /* make a call gate to reenter kernel with */ gdp = &ldt[LSYS5CALLS_SEL].gd; x = (int) &IDTVEC(lcall_syscall); gdp->gd_looffset = x; gdp->gd_selector = GSEL(GCODE_SEL,SEL_KPL); gdp->gd_stkcpy = 1; gdp->gd_type = SDT_SYS386CGT; gdp->gd_dpl = SEL_UPL; gdp->gd_p = 1; gdp->gd_hioffset = x >> 16; /* XXX does this work? */ /* XXX yes! */ ldt[LBSDICALLS_SEL] = ldt[LSYS5CALLS_SEL]; ldt[LSOL26CALLS_SEL] = ldt[LSYS5CALLS_SEL]; /* transfer to user mode */ _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); _udatasel = GSEL(GUDATA_SEL, SEL_UPL); /* setup proc 0's pcb */ thread0.td_pcb->pcb_flags = 0; #if defined(PAE) || defined(PAE_TABLES) thread0.td_pcb->pcb_cr3 = (int)IdlePDPT; #else thread0.td_pcb->pcb_cr3 = (int)IdlePTD; #endif thread0.td_pcb->pcb_ext = 0; thread0.td_frame = &proc0_tf; cpu_probe_amdc1e(); #ifdef FDT x86_init_fdt(); #endif /* Location of kernel stack for locore */ return ((register_t)thread0.td_pcb); } #endif void cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) { pcpu->pc_acpi_id = 0xffffffff; } #ifndef PC98 static int smap_sysctl_handler(SYSCTL_HANDLER_ARGS) { struct bios_smap *smapbase; struct bios_smap_xattr smap; caddr_t kmdp; uint32_t *smapattr; int count, error, i; /* Retrieve the system memory map from the loader. */ kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf32 kernel"); if (kmdp == NULL) return (0); smapbase = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (smapbase == NULL) return (0); smapattr = (uint32_t *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP_XATTR); count = *((u_int32_t *)smapbase - 1) / sizeof(*smapbase); error = 0; for (i = 0; i < count; i++) { smap.base = smapbase[i].base; smap.length = smapbase[i].length; smap.type = smapbase[i].type; if (smapattr != NULL) smap.xattr = smapattr[i]; else smap.xattr = 0; error = SYSCTL_OUT(req, &smap, sizeof(smap)); } return (error); } SYSCTL_PROC(_machdep, OID_AUTO, smap, CTLTYPE_OPAQUE|CTLFLAG_RD, NULL, 0, smap_sysctl_handler, "S,bios_smap_xattr", "Raw BIOS SMAP data"); #endif /* !PC98 */ void spinlock_enter(void) { struct thread *td; register_t flags; td = curthread; if (td->td_md.md_spinlock_count == 0) { flags = intr_disable(); td->td_md.md_spinlock_count = 1; td->td_md.md_saved_flags = flags; } else td->td_md.md_spinlock_count++; critical_enter(); } void spinlock_exit(void) { struct thread *td; register_t flags; td = curthread; critical_exit(); flags = td->td_md.md_saved_flags; td->td_md.md_spinlock_count--; if (td->td_md.md_spinlock_count == 0) intr_restore(flags); } #if defined(I586_CPU) && !defined(NO_F00F_HACK) static void f00f_hack(void *unused); SYSINIT(f00f_hack, SI_SUB_INTRINSIC, SI_ORDER_FIRST, f00f_hack, NULL); static void f00f_hack(void *unused) { struct gate_descriptor *new_idt; vm_offset_t tmp; if (!has_f00f_bug) return; GIANT_REQUIRED; printf("Intel Pentium detected, installing workaround for F00F bug\n"); tmp = kmem_malloc(kernel_arena, PAGE_SIZE * 2, M_WAITOK | M_ZERO); if (tmp == 0) panic("kmem_malloc returned 0"); /* Put the problematic entry (#6) at the end of the lower page. */ new_idt = (struct gate_descriptor*) (tmp + PAGE_SIZE - 7 * sizeof(struct gate_descriptor)); bcopy(idt, new_idt, sizeof(idt0)); r_idt.rd_base = (u_int)new_idt; lidt(&r_idt); idt = new_idt; pmap_protect(kernel_pmap, tmp, tmp + PAGE_SIZE, VM_PROT_READ); } #endif /* defined(I586_CPU) && !NO_F00F_HACK */ /* * Construct a PCB from a trapframe. This is called from kdb_trap() where * we want to start a backtrace from the function that caused us to enter * the debugger. We have the context in the trapframe, but base the trace * on the PCB. The PCB doesn't have to be perfect, as long as it contains * enough for a backtrace. */ void makectx(struct trapframe *tf, struct pcb *pcb) { pcb->pcb_edi = tf->tf_edi; pcb->pcb_esi = tf->tf_esi; pcb->pcb_ebp = tf->tf_ebp; pcb->pcb_ebx = tf->tf_ebx; pcb->pcb_eip = tf->tf_eip; pcb->pcb_esp = (ISPL(tf->tf_cs)) ? tf->tf_esp : (int)(tf + 1) - 8; pcb->pcb_gs = rgs(); } int ptrace_set_pc(struct thread *td, u_long addr) { td->td_frame->tf_eip = addr; return (0); } int ptrace_single_step(struct thread *td) { td->td_frame->tf_eflags |= PSL_T; return (0); } int ptrace_clear_single_step(struct thread *td) { td->td_frame->tf_eflags &= ~PSL_T; return (0); } int fill_regs(struct thread *td, struct reg *regs) { struct pcb *pcb; struct trapframe *tp; tp = td->td_frame; pcb = td->td_pcb; regs->r_gs = pcb->pcb_gs; return (fill_frame_regs(tp, regs)); } int fill_frame_regs(struct trapframe *tp, struct reg *regs) { regs->r_fs = tp->tf_fs; regs->r_es = tp->tf_es; regs->r_ds = tp->tf_ds; regs->r_edi = tp->tf_edi; regs->r_esi = tp->tf_esi; regs->r_ebp = tp->tf_ebp; regs->r_ebx = tp->tf_ebx; regs->r_edx = tp->tf_edx; regs->r_ecx = tp->tf_ecx; regs->r_eax = tp->tf_eax; regs->r_eip = tp->tf_eip; regs->r_cs = tp->tf_cs; regs->r_eflags = tp->tf_eflags; regs->r_esp = tp->tf_esp; regs->r_ss = tp->tf_ss; return (0); } int set_regs(struct thread *td, struct reg *regs) { struct pcb *pcb; struct trapframe *tp; tp = td->td_frame; if (!EFL_SECURE(regs->r_eflags, tp->tf_eflags) || !CS_SECURE(regs->r_cs)) return (EINVAL); pcb = td->td_pcb; tp->tf_fs = regs->r_fs; tp->tf_es = regs->r_es; tp->tf_ds = regs->r_ds; tp->tf_edi = regs->r_edi; tp->tf_esi = regs->r_esi; tp->tf_ebp = regs->r_ebp; tp->tf_ebx = regs->r_ebx; tp->tf_edx = regs->r_edx; tp->tf_ecx = regs->r_ecx; tp->tf_eax = regs->r_eax; tp->tf_eip = regs->r_eip; tp->tf_cs = regs->r_cs; tp->tf_eflags = regs->r_eflags; tp->tf_esp = regs->r_esp; tp->tf_ss = regs->r_ss; pcb->pcb_gs = regs->r_gs; return (0); } #ifdef CPU_ENABLE_SSE static void fill_fpregs_xmm(sv_xmm, sv_87) struct savexmm *sv_xmm; struct save87 *sv_87; { register struct env87 *penv_87 = &sv_87->sv_env; register struct envxmm *penv_xmm = &sv_xmm->sv_env; int i; bzero(sv_87, sizeof(*sv_87)); /* FPU control/status */ penv_87->en_cw = penv_xmm->en_cw; penv_87->en_sw = penv_xmm->en_sw; penv_87->en_tw = penv_xmm->en_tw; penv_87->en_fip = penv_xmm->en_fip; penv_87->en_fcs = penv_xmm->en_fcs; penv_87->en_opcode = penv_xmm->en_opcode; penv_87->en_foo = penv_xmm->en_foo; penv_87->en_fos = penv_xmm->en_fos; /* FPU registers */ for (i = 0; i < 8; ++i) sv_87->sv_ac[i] = sv_xmm->sv_fp[i].fp_acc; } static void set_fpregs_xmm(sv_87, sv_xmm) struct save87 *sv_87; struct savexmm *sv_xmm; { register struct env87 *penv_87 = &sv_87->sv_env; register struct envxmm *penv_xmm = &sv_xmm->sv_env; int i; /* FPU control/status */ penv_xmm->en_cw = penv_87->en_cw; penv_xmm->en_sw = penv_87->en_sw; penv_xmm->en_tw = penv_87->en_tw; penv_xmm->en_fip = penv_87->en_fip; penv_xmm->en_fcs = penv_87->en_fcs; penv_xmm->en_opcode = penv_87->en_opcode; penv_xmm->en_foo = penv_87->en_foo; penv_xmm->en_fos = penv_87->en_fos; /* FPU registers */ for (i = 0; i < 8; ++i) sv_xmm->sv_fp[i].fp_acc = sv_87->sv_ac[i]; } #endif /* CPU_ENABLE_SSE */ int fill_fpregs(struct thread *td, struct fpreg *fpregs) { KASSERT(td == curthread || TD_IS_SUSPENDED(td) || P_SHOULDSTOP(td->td_proc), ("not suspended thread %p", td)); #ifdef DEV_NPX npxgetregs(td); #else bzero(fpregs, sizeof(*fpregs)); #endif #ifdef CPU_ENABLE_SSE if (cpu_fxsr) fill_fpregs_xmm(&get_pcb_user_save_td(td)->sv_xmm, (struct save87 *)fpregs); else #endif /* CPU_ENABLE_SSE */ bcopy(&get_pcb_user_save_td(td)->sv_87, fpregs, sizeof(*fpregs)); return (0); } int set_fpregs(struct thread *td, struct fpreg *fpregs) { #ifdef CPU_ENABLE_SSE if (cpu_fxsr) set_fpregs_xmm((struct save87 *)fpregs, &get_pcb_user_save_td(td)->sv_xmm); else #endif /* CPU_ENABLE_SSE */ bcopy(fpregs, &get_pcb_user_save_td(td)->sv_87, sizeof(*fpregs)); #ifdef DEV_NPX npxuserinited(td); #endif return (0); } /* * Get machine context. */ int get_mcontext(struct thread *td, mcontext_t *mcp, int flags) { struct trapframe *tp; struct segment_descriptor *sdp; tp = td->td_frame; PROC_LOCK(curthread->td_proc); mcp->mc_onstack = sigonstack(tp->tf_esp); PROC_UNLOCK(curthread->td_proc); mcp->mc_gs = td->td_pcb->pcb_gs; mcp->mc_fs = tp->tf_fs; mcp->mc_es = tp->tf_es; mcp->mc_ds = tp->tf_ds; mcp->mc_edi = tp->tf_edi; mcp->mc_esi = tp->tf_esi; mcp->mc_ebp = tp->tf_ebp; mcp->mc_isp = tp->tf_isp; mcp->mc_eflags = tp->tf_eflags; if (flags & GET_MC_CLEAR_RET) { mcp->mc_eax = 0; mcp->mc_edx = 0; mcp->mc_eflags &= ~PSL_C; } else { mcp->mc_eax = tp->tf_eax; mcp->mc_edx = tp->tf_edx; } mcp->mc_ebx = tp->tf_ebx; mcp->mc_ecx = tp->tf_ecx; mcp->mc_eip = tp->tf_eip; mcp->mc_cs = tp->tf_cs; mcp->mc_esp = tp->tf_esp; mcp->mc_ss = tp->tf_ss; mcp->mc_len = sizeof(*mcp); get_fpcontext(td, mcp, NULL, 0); sdp = &td->td_pcb->pcb_fsd; mcp->mc_fsbase = sdp->sd_hibase << 24 | sdp->sd_lobase; sdp = &td->td_pcb->pcb_gsd; mcp->mc_gsbase = sdp->sd_hibase << 24 | sdp->sd_lobase; mcp->mc_flags = 0; mcp->mc_xfpustate = 0; mcp->mc_xfpustate_len = 0; bzero(mcp->mc_spare2, sizeof(mcp->mc_spare2)); return (0); } /* * Set machine context. * * However, we don't set any but the user modifiable flags, and we won't * touch the cs selector. */ int set_mcontext(struct thread *td, mcontext_t *mcp) { struct trapframe *tp; char *xfpustate; int eflags, ret; tp = td->td_frame; if (mcp->mc_len != sizeof(*mcp) || (mcp->mc_flags & ~_MC_FLAG_MASK) != 0) return (EINVAL); eflags = (mcp->mc_eflags & PSL_USERCHANGE) | (tp->tf_eflags & ~PSL_USERCHANGE); if (mcp->mc_flags & _MC_HASFPXSTATE) { if (mcp->mc_xfpustate_len > cpu_max_ext_state_size - sizeof(union savefpu)) return (EINVAL); xfpustate = __builtin_alloca(mcp->mc_xfpustate_len); ret = copyin((void *)mcp->mc_xfpustate, xfpustate, mcp->mc_xfpustate_len); if (ret != 0) return (ret); } else xfpustate = NULL; ret = set_fpcontext(td, mcp, xfpustate, mcp->mc_xfpustate_len); if (ret != 0) return (ret); tp->tf_fs = mcp->mc_fs; tp->tf_es = mcp->mc_es; tp->tf_ds = mcp->mc_ds; tp->tf_edi = mcp->mc_edi; tp->tf_esi = mcp->mc_esi; tp->tf_ebp = mcp->mc_ebp; tp->tf_ebx = mcp->mc_ebx; tp->tf_edx = mcp->mc_edx; tp->tf_ecx = mcp->mc_ecx; tp->tf_eax = mcp->mc_eax; tp->tf_eip = mcp->mc_eip; tp->tf_eflags = eflags; tp->tf_esp = mcp->mc_esp; tp->tf_ss = mcp->mc_ss; td->td_pcb->pcb_gs = mcp->mc_gs; return (0); } static void get_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpusave, size_t xfpusave_len) { #ifdef CPU_ENABLE_SSE size_t max_len, len; #endif #ifndef DEV_NPX mcp->mc_fpformat = _MC_FPFMT_NODEV; mcp->mc_ownedfp = _MC_FPOWNED_NONE; bzero(mcp->mc_fpstate, sizeof(mcp->mc_fpstate)); #else mcp->mc_ownedfp = npxgetregs(td); bcopy(get_pcb_user_save_td(td), &mcp->mc_fpstate[0], sizeof(mcp->mc_fpstate)); mcp->mc_fpformat = npxformat(); #ifdef CPU_ENABLE_SSE if (!use_xsave || xfpusave_len == 0) return; max_len = cpu_max_ext_state_size - sizeof(union savefpu); len = xfpusave_len; if (len > max_len) { len = max_len; bzero(xfpusave + max_len, len - max_len); } mcp->mc_flags |= _MC_HASFPXSTATE; mcp->mc_xfpustate_len = len; bcopy(get_pcb_user_save_td(td) + 1, xfpusave, len); #endif #endif } static int set_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpustate, size_t xfpustate_len) { union savefpu *fpstate; int error; if (mcp->mc_fpformat == _MC_FPFMT_NODEV) return (0); else if (mcp->mc_fpformat != _MC_FPFMT_387 && mcp->mc_fpformat != _MC_FPFMT_XMM) return (EINVAL); else if (mcp->mc_ownedfp == _MC_FPOWNED_NONE) { /* We don't care what state is left in the FPU or PCB. */ fpstate_drop(td); error = 0; } else if (mcp->mc_ownedfp == _MC_FPOWNED_FPU || mcp->mc_ownedfp == _MC_FPOWNED_PCB) { #ifdef DEV_NPX fpstate = (union savefpu *)&mcp->mc_fpstate; #ifdef CPU_ENABLE_SSE if (cpu_fxsr) fpstate->sv_xmm.sv_env.en_mxcsr &= cpu_mxcsr_mask; #endif error = npxsetregs(td, fpstate, xfpustate, xfpustate_len); #else error = EINVAL; #endif } else return (EINVAL); return (error); } static void fpstate_drop(struct thread *td) { KASSERT(PCB_USER_FPU(td->td_pcb), ("fpstate_drop: kernel-owned fpu")); critical_enter(); #ifdef DEV_NPX if (PCPU_GET(fpcurthread) == td) npxdrop(); #endif /* * XXX force a full drop of the npx. The above only drops it if we * owned it. npxgetregs() has the same bug in the !cpu_fxsr case. * * XXX I don't much like npxgetregs()'s semantics of doing a full * drop. Dropping only to the pcb matches fnsave's behaviour. * We only need to drop to !PCB_INITDONE in sendsig(). But * sendsig() is the only caller of npxgetregs()... perhaps we just * have too many layers. */ curthread->td_pcb->pcb_flags &= ~(PCB_NPXINITDONE | PCB_NPXUSERINITDONE); critical_exit(); } int fill_dbregs(struct thread *td, struct dbreg *dbregs) { struct pcb *pcb; if (td == NULL) { dbregs->dr[0] = rdr0(); dbregs->dr[1] = rdr1(); dbregs->dr[2] = rdr2(); dbregs->dr[3] = rdr3(); dbregs->dr[4] = rdr4(); dbregs->dr[5] = rdr5(); dbregs->dr[6] = rdr6(); dbregs->dr[7] = rdr7(); } else { pcb = td->td_pcb; dbregs->dr[0] = pcb->pcb_dr0; dbregs->dr[1] = pcb->pcb_dr1; dbregs->dr[2] = pcb->pcb_dr2; dbregs->dr[3] = pcb->pcb_dr3; dbregs->dr[4] = 0; dbregs->dr[5] = 0; dbregs->dr[6] = pcb->pcb_dr6; dbregs->dr[7] = pcb->pcb_dr7; } return (0); } int set_dbregs(struct thread *td, struct dbreg *dbregs) { struct pcb *pcb; int i; if (td == NULL) { load_dr0(dbregs->dr[0]); load_dr1(dbregs->dr[1]); load_dr2(dbregs->dr[2]); load_dr3(dbregs->dr[3]); load_dr4(dbregs->dr[4]); load_dr5(dbregs->dr[5]); load_dr6(dbregs->dr[6]); load_dr7(dbregs->dr[7]); } else { /* * Don't let an illegal value for dr7 get set. Specifically, * check for undefined settings. Setting these bit patterns * result in undefined behaviour and can lead to an unexpected * TRCTRAP. */ for (i = 0; i < 4; i++) { if (DBREG_DR7_ACCESS(dbregs->dr[7], i) == 0x02) return (EINVAL); if (DBREG_DR7_LEN(dbregs->dr[7], i) == 0x02) return (EINVAL); } pcb = td->td_pcb; /* * Don't let a process set a breakpoint that is not within the * process's address space. If a process could do this, it * could halt the system by setting a breakpoint in the kernel * (if ddb was enabled). Thus, we need to check to make sure * that no breakpoints are being enabled for addresses outside * process's address space. * * XXX - what about when the watched area of the user's * address space is written into from within the kernel * ... wouldn't that still cause a breakpoint to be generated * from within kernel mode? */ if (DBREG_DR7_ENABLED(dbregs->dr[7], 0)) { /* dr0 is enabled */ if (dbregs->dr[0] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 1)) { /* dr1 is enabled */ if (dbregs->dr[1] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 2)) { /* dr2 is enabled */ if (dbregs->dr[2] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 3)) { /* dr3 is enabled */ if (dbregs->dr[3] >= VM_MAXUSER_ADDRESS) return (EINVAL); } pcb->pcb_dr0 = dbregs->dr[0]; pcb->pcb_dr1 = dbregs->dr[1]; pcb->pcb_dr2 = dbregs->dr[2]; pcb->pcb_dr3 = dbregs->dr[3]; pcb->pcb_dr6 = dbregs->dr[6]; pcb->pcb_dr7 = dbregs->dr[7]; pcb->pcb_flags |= PCB_DBREGS; } return (0); } /* * Return > 0 if a hardware breakpoint has been hit, and the * breakpoint was in user space. Return 0, otherwise. */ int user_dbreg_trap(void) { u_int32_t dr7, dr6; /* debug registers dr6 and dr7 */ u_int32_t bp; /* breakpoint bits extracted from dr6 */ int nbp; /* number of breakpoints that triggered */ caddr_t addr[4]; /* breakpoint addresses */ int i; dr7 = rdr7(); if ((dr7 & 0x000000ff) == 0) { /* * all GE and LE bits in the dr7 register are zero, * thus the trap couldn't have been caused by the * hardware debug registers */ return 0; } nbp = 0; dr6 = rdr6(); bp = dr6 & 0x0000000f; if (!bp) { /* * None of the breakpoint bits are set meaning this * trap was not caused by any of the debug registers */ return 0; } /* * at least one of the breakpoints were hit, check to see * which ones and if any of them are user space addresses */ if (bp & 0x01) { addr[nbp++] = (caddr_t)rdr0(); } if (bp & 0x02) { addr[nbp++] = (caddr_t)rdr1(); } if (bp & 0x04) { addr[nbp++] = (caddr_t)rdr2(); } if (bp & 0x08) { addr[nbp++] = (caddr_t)rdr3(); } for (i = 0; i < nbp; i++) { if (addr[i] < (caddr_t)VM_MAXUSER_ADDRESS) { /* * addr[i] is in user space */ return nbp; } } /* * None of the breakpoints are in user space. */ return 0; } #ifdef KDB /* * Provide inb() and outb() as functions. They are normally only available as * inline functions, thus cannot be called from the debugger. */ /* silence compiler warnings */ u_char inb_(u_short); void outb_(u_short, u_char); u_char inb_(u_short port) { return inb(port); } void outb_(u_short port, u_char data) { outb(port, data); } #endif /* KDB */ Index: stable/10/sys/i386/include/md_var.h =================================================================== --- stable/10/sys/i386/include/md_var.h (revision 322204) +++ stable/10/sys/i386/include/md_var.h (revision 322205) @@ -1,150 +1,151 @@ /*- * Copyright (c) 1995 Bruce D. Evans. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _MACHINE_MD_VAR_H_ #define _MACHINE_MD_VAR_H_ /* * Miscellaneous machine-dependent declarations. */ extern long Maxmem; extern u_int basemem; /* PA of original top of base memory */ extern int busdma_swi_pending; extern u_int cpu_exthigh; extern u_int cpu_feature; extern u_int cpu_feature2; extern u_int amd_feature; extern u_int amd_feature2; extern u_int amd_pminfo; extern u_int via_feature_rng; extern u_int via_feature_xcrypt; extern u_int cpu_clflush_line_size; extern u_int cpu_stdext_feature; extern u_int cpu_stdext_feature2; extern u_int cpu_fxsr; extern u_int cpu_high; extern u_int cpu_id; extern u_int cpu_max_ext_state_size; extern u_int cpu_mxcsr_mask; extern u_int cpu_procinfo; extern u_int cpu_procinfo2; extern char cpu_vendor[]; extern u_int cpu_vendor_id; extern u_int cpu_mon_mwait_flags; extern u_int cpu_mon_min_size; extern u_int cpu_mon_max_size; extern u_int cpu_maxphyaddr; extern u_int cyrix_did; #if defined(I586_CPU) && !defined(NO_F00F_HACK) extern int has_f00f_bug; #endif extern u_int hv_high; extern char hv_vendor[]; extern char kstack[]; extern char sigcode[]; extern int szsigcode; #ifdef COMPAT_FREEBSD4 extern int szfreebsd4_sigcode; #endif #ifdef COMPAT_43 extern int szosigcode; #endif extern uint32_t *vm_page_dump; extern int vm_page_dump_size; extern int workaround_erratum383; extern int _udatasel; extern int _ucodesel; extern int use_xsave; extern uint64_t xsave_mask; typedef void alias_for_inthand_t(u_int cs, u_int ef, u_int esp, u_int ss); struct pcb; union savefpu; struct thread; struct reg; struct fpreg; struct dbreg; struct dumperinfo; struct segment_descriptor; /* * Returns the maximum physical address that can be used with the * current system. */ static __inline vm_paddr_t cpu_getmaxphyaddr(void) { #if !defined(PAE) return (0xffffffff); #else return ((1ULL << cpu_maxphyaddr) - 1); #endif } void *alloc_fpusave(int flags); void bcopyb(const void *from, void *to, size_t len); void busdma_swi(void); void cpu_setregs(void); void cpu_switch_load_gs(void) __asm(__STRING(cpu_switch_load_gs)); void doreti_iret(void) __asm(__STRING(doreti_iret)); void doreti_iret_fault(void) __asm(__STRING(doreti_iret_fault)); void doreti_popl_ds(void) __asm(__STRING(doreti_popl_ds)); void doreti_popl_ds_fault(void) __asm(__STRING(doreti_popl_ds_fault)); void doreti_popl_es(void) __asm(__STRING(doreti_popl_es)); void doreti_popl_es_fault(void) __asm(__STRING(doreti_popl_es_fault)); void doreti_popl_fs(void) __asm(__STRING(doreti_popl_fs)); void doreti_popl_fs_fault(void) __asm(__STRING(doreti_popl_fs_fault)); void dump_add_page(vm_paddr_t); void dump_drop_page(vm_paddr_t); void finishidentcpu(void); void fillw(int /*u_short*/ pat, void *base, size_t cnt); void fill_based_sd(struct segment_descriptor *sdp, uint32_t base); +void identify_hypervisor(void); void initializecpu(void); void initializecpucache(void); bool fix_cpuid(void); void i686_pagezero(void *addr); void sse2_pagezero(void *addr); void init_AMD_Elan_sc520(void); int is_physical_memory(vm_paddr_t addr); int isa_nmi(int cd); vm_paddr_t kvtop(void *addr); void panicifcpuunsupported(void); void ppro_reenable_apic(void); void printcpuinfo(void); void setidt(int idx, alias_for_inthand_t *func, int typ, int dpl, int selec); int user_dbreg_trap(void); void minidumpsys(struct dumperinfo *); union savefpu *get_pcb_user_save_td(struct thread *td); union savefpu *get_pcb_user_save_pcb(struct pcb *pcb); struct pcb *get_pcb_td(struct thread *td); #endif /* !_MACHINE_MD_VAR_H_ */ Index: stable/10/sys/x86/x86/identcpu.c =================================================================== --- stable/10/sys/x86/x86/identcpu.c (revision 322204) +++ stable/10/sys/x86/x86/identcpu.c (revision 322205) @@ -1,2395 +1,2392 @@ /*- * Copyright (c) 1992 Terrence R. Lambert. * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. * Copyright (c) 1997 KATO Takenori. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Id: machdep.c,v 1.193 1996/06/18 01:22:04 bde Exp */ #include __FBSDID("$FreeBSD$"); #include "opt_cpu.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef __i386__ #define IDENTBLUE_CYRIX486 0 #define IDENTBLUE_IBMCPU 1 #define IDENTBLUE_CYRIXM2 2 static void identifycyrix(void); static void print_transmeta_info(void); #endif static u_int find_cpu_vendor_id(void); static void print_AMD_info(void); static void print_INTEL_info(void); static void print_INTEL_TLB(u_int data); static void print_hypervisor_info(void); static void print_svm_info(void); static void print_via_padlock_info(void); static void print_vmx_info(void); int cpu_class; char machine[] = MACHINE; #ifdef __amd64__ #ifdef SCTL_MASK32 extern int adaptive_machine_arch; #endif static int sysctl_hw_machine(SYSCTL_HANDLER_ARGS) { #ifdef SCTL_MASK32 static const char machine32[] = "i386"; #endif int error; #ifdef SCTL_MASK32 if ((req->flags & SCTL_MASK32) != 0 && adaptive_machine_arch) error = SYSCTL_OUT(req, machine32, sizeof(machine32)); else #endif error = SYSCTL_OUT(req, machine, sizeof(machine)); return (error); } SYSCTL_PROC(_hw, HW_MACHINE, machine, CTLTYPE_STRING | CTLFLAG_RD, NULL, 0, sysctl_hw_machine, "A", "Machine class"); #else SYSCTL_STRING(_hw, HW_MACHINE, machine, CTLFLAG_RD, machine, 0, "Machine class"); #endif static char cpu_model[128]; SYSCTL_STRING(_hw, HW_MODEL, model, CTLFLAG_RD, cpu_model, 0, "Machine model"); static int hw_clockrate; SYSCTL_INT(_hw, OID_AUTO, clockrate, CTLFLAG_RD, &hw_clockrate, 0, "CPU instruction clock rate"); u_int hv_high; char hv_vendor[16]; SYSCTL_STRING(_hw, OID_AUTO, hv_vendor, CTLFLAG_RD, hv_vendor, 0, "Hypervisor vendor"); static eventhandler_tag tsc_post_tag; static char cpu_brand[48]; #ifdef __i386__ #define MAX_BRAND_INDEX 8 static const char *cpu_brandtable[MAX_BRAND_INDEX + 1] = { NULL, /* No brand */ "Intel Celeron", "Intel Pentium III", "Intel Pentium III Xeon", NULL, NULL, NULL, NULL, "Intel Pentium 4" }; #endif static struct { char *cpu_name; int cpu_class; } cpus[] = { #ifdef __i386__ { "Intel 80286", CPUCLASS_286 }, /* CPU_286 */ { "i386SX", CPUCLASS_386 }, /* CPU_386SX */ { "i386DX", CPUCLASS_386 }, /* CPU_386 */ { "i486SX", CPUCLASS_486 }, /* CPU_486SX */ { "i486DX", CPUCLASS_486 }, /* CPU_486 */ { "Pentium", CPUCLASS_586 }, /* CPU_586 */ { "Cyrix 486", CPUCLASS_486 }, /* CPU_486DLC */ { "Pentium Pro", CPUCLASS_686 }, /* CPU_686 */ { "Cyrix 5x86", CPUCLASS_486 }, /* CPU_M1SC */ { "Cyrix 6x86", CPUCLASS_486 }, /* CPU_M1 */ { "Blue Lightning", CPUCLASS_486 }, /* CPU_BLUE */ { "Cyrix 6x86MX", CPUCLASS_686 }, /* CPU_M2 */ { "NexGen 586", CPUCLASS_386 }, /* CPU_NX586 (XXX) */ { "Cyrix 486S/DX", CPUCLASS_486 }, /* CPU_CY486DX */ { "Pentium II", CPUCLASS_686 }, /* CPU_PII */ { "Pentium III", CPUCLASS_686 }, /* CPU_PIII */ { "Pentium 4", CPUCLASS_686 }, /* CPU_P4 */ #else { "Clawhammer", CPUCLASS_K8 }, /* CPU_CLAWHAMMER */ { "Sledgehammer", CPUCLASS_K8 }, /* CPU_SLEDGEHAMMER */ #endif }; static struct { char *vendor; u_int vendor_id; } cpu_vendors[] = { { INTEL_VENDOR_ID, CPU_VENDOR_INTEL }, /* GenuineIntel */ { AMD_VENDOR_ID, CPU_VENDOR_AMD }, /* AuthenticAMD */ { CENTAUR_VENDOR_ID, CPU_VENDOR_CENTAUR }, /* CentaurHauls */ #ifdef __i386__ { NSC_VENDOR_ID, CPU_VENDOR_NSC }, /* Geode by NSC */ { CYRIX_VENDOR_ID, CPU_VENDOR_CYRIX }, /* CyrixInstead */ { TRANSMETA_VENDOR_ID, CPU_VENDOR_TRANSMETA }, /* GenuineTMx86 */ { SIS_VENDOR_ID, CPU_VENDOR_SIS }, /* SiS SiS SiS */ { UMC_VENDOR_ID, CPU_VENDOR_UMC }, /* UMC UMC UMC */ { NEXGEN_VENDOR_ID, CPU_VENDOR_NEXGEN }, /* NexGenDriven */ { RISE_VENDOR_ID, CPU_VENDOR_RISE }, /* RiseRiseRise */ #if 0 /* XXX CPUID 8000_0000h and 8086_0000h, not 0000_0000h */ { "TransmetaCPU", CPU_VENDOR_TRANSMETA }, #endif #endif }; void printcpuinfo(void) { u_int regs[4], i; char *brand; cpu_class = cpus[cpu].cpu_class; printf("CPU: "); strncpy(cpu_model, cpus[cpu].cpu_name, sizeof (cpu_model)); /* Check for extended CPUID information and a processor name. */ if (cpu_exthigh >= 0x80000004) { brand = cpu_brand; for (i = 0x80000002; i < 0x80000005; i++) { do_cpuid(i, regs); memcpy(brand, regs, sizeof(regs)); brand += sizeof(regs); } } switch (cpu_vendor_id) { case CPU_VENDOR_INTEL: #ifdef __i386__ if ((cpu_id & 0xf00) > 0x300) { u_int brand_index; cpu_model[0] = '\0'; switch (cpu_id & 0x3000) { case 0x1000: strcpy(cpu_model, "Overdrive "); break; case 0x2000: strcpy(cpu_model, "Dual "); break; } switch (cpu_id & 0xf00) { case 0x400: strcat(cpu_model, "i486 "); /* Check the particular flavor of 486 */ switch (cpu_id & 0xf0) { case 0x00: case 0x10: strcat(cpu_model, "DX"); break; case 0x20: strcat(cpu_model, "SX"); break; case 0x30: strcat(cpu_model, "DX2"); break; case 0x40: strcat(cpu_model, "SL"); break; case 0x50: strcat(cpu_model, "SX2"); break; case 0x70: strcat(cpu_model, "DX2 Write-Back Enhanced"); break; case 0x80: strcat(cpu_model, "DX4"); break; } break; case 0x500: /* Check the particular flavor of 586 */ strcat(cpu_model, "Pentium"); switch (cpu_id & 0xf0) { case 0x00: strcat(cpu_model, " A-step"); break; case 0x10: strcat(cpu_model, "/P5"); break; case 0x20: strcat(cpu_model, "/P54C"); break; case 0x30: strcat(cpu_model, "/P24T"); break; case 0x40: strcat(cpu_model, "/P55C"); break; case 0x70: strcat(cpu_model, "/P54C"); break; case 0x80: strcat(cpu_model, "/P55C (quarter-micron)"); break; default: /* nothing */ break; } #if defined(I586_CPU) && !defined(NO_F00F_HACK) /* * XXX - If/when Intel fixes the bug, this * should also check the version of the * CPU, not just that it's a Pentium. */ has_f00f_bug = 1; #endif break; case 0x600: /* Check the particular flavor of 686 */ switch (cpu_id & 0xf0) { case 0x00: strcat(cpu_model, "Pentium Pro A-step"); break; case 0x10: strcat(cpu_model, "Pentium Pro"); break; case 0x30: case 0x50: case 0x60: strcat(cpu_model, "Pentium II/Pentium II Xeon/Celeron"); cpu = CPU_PII; break; case 0x70: case 0x80: case 0xa0: case 0xb0: strcat(cpu_model, "Pentium III/Pentium III Xeon/Celeron"); cpu = CPU_PIII; break; default: strcat(cpu_model, "Unknown 80686"); break; } break; case 0xf00: strcat(cpu_model, "Pentium 4"); cpu = CPU_P4; break; default: strcat(cpu_model, "unknown"); break; } /* * If we didn't get a brand name from the extended * CPUID, try to look it up in the brand table. */ if (cpu_high > 0 && *cpu_brand == '\0') { brand_index = cpu_procinfo & CPUID_BRAND_INDEX; if (brand_index <= MAX_BRAND_INDEX && cpu_brandtable[brand_index] != NULL) strcpy(cpu_brand, cpu_brandtable[brand_index]); } } #else /* Please make up your mind folks! */ strcat(cpu_model, "EM64T"); #endif break; case CPU_VENDOR_AMD: /* * Values taken from AMD Processor Recognition * http://www.amd.com/K6/k6docs/pdf/20734g.pdf * (also describes ``Features'' encodings. */ strcpy(cpu_model, "AMD "); #ifdef __i386__ switch (cpu_id & 0xFF0) { case 0x410: strcat(cpu_model, "Standard Am486DX"); break; case 0x430: strcat(cpu_model, "Enhanced Am486DX2 Write-Through"); break; case 0x470: strcat(cpu_model, "Enhanced Am486DX2 Write-Back"); break; case 0x480: strcat(cpu_model, "Enhanced Am486DX4/Am5x86 Write-Through"); break; case 0x490: strcat(cpu_model, "Enhanced Am486DX4/Am5x86 Write-Back"); break; case 0x4E0: strcat(cpu_model, "Am5x86 Write-Through"); break; case 0x4F0: strcat(cpu_model, "Am5x86 Write-Back"); break; case 0x500: strcat(cpu_model, "K5 model 0"); break; case 0x510: strcat(cpu_model, "K5 model 1"); break; case 0x520: strcat(cpu_model, "K5 PR166 (model 2)"); break; case 0x530: strcat(cpu_model, "K5 PR200 (model 3)"); break; case 0x560: strcat(cpu_model, "K6"); break; case 0x570: strcat(cpu_model, "K6 266 (model 1)"); break; case 0x580: strcat(cpu_model, "K6-2"); break; case 0x590: strcat(cpu_model, "K6-III"); break; case 0x5a0: strcat(cpu_model, "Geode LX"); break; default: strcat(cpu_model, "Unknown"); break; } #else if ((cpu_id & 0xf00) == 0xf00) strcat(cpu_model, "AMD64 Processor"); else strcat(cpu_model, "Unknown"); #endif break; #ifdef __i386__ case CPU_VENDOR_CYRIX: strcpy(cpu_model, "Cyrix "); switch (cpu_id & 0xff0) { case 0x440: strcat(cpu_model, "MediaGX"); break; case 0x520: strcat(cpu_model, "6x86"); break; case 0x540: cpu_class = CPUCLASS_586; strcat(cpu_model, "GXm"); break; case 0x600: strcat(cpu_model, "6x86MX"); break; default: /* * Even though CPU supports the cpuid * instruction, it can be disabled. * Therefore, this routine supports all Cyrix * CPUs. */ switch (cyrix_did & 0xf0) { case 0x00: switch (cyrix_did & 0x0f) { case 0x00: strcat(cpu_model, "486SLC"); break; case 0x01: strcat(cpu_model, "486DLC"); break; case 0x02: strcat(cpu_model, "486SLC2"); break; case 0x03: strcat(cpu_model, "486DLC2"); break; case 0x04: strcat(cpu_model, "486SRx"); break; case 0x05: strcat(cpu_model, "486DRx"); break; case 0x06: strcat(cpu_model, "486SRx2"); break; case 0x07: strcat(cpu_model, "486DRx2"); break; case 0x08: strcat(cpu_model, "486SRu"); break; case 0x09: strcat(cpu_model, "486DRu"); break; case 0x0a: strcat(cpu_model, "486SRu2"); break; case 0x0b: strcat(cpu_model, "486DRu2"); break; default: strcat(cpu_model, "Unknown"); break; } break; case 0x10: switch (cyrix_did & 0x0f) { case 0x00: strcat(cpu_model, "486S"); break; case 0x01: strcat(cpu_model, "486S2"); break; case 0x02: strcat(cpu_model, "486Se"); break; case 0x03: strcat(cpu_model, "486S2e"); break; case 0x0a: strcat(cpu_model, "486DX"); break; case 0x0b: strcat(cpu_model, "486DX2"); break; case 0x0f: strcat(cpu_model, "486DX4"); break; default: strcat(cpu_model, "Unknown"); break; } break; case 0x20: if ((cyrix_did & 0x0f) < 8) strcat(cpu_model, "6x86"); /* Where did you get it? */ else strcat(cpu_model, "5x86"); break; case 0x30: strcat(cpu_model, "6x86"); break; case 0x40: if ((cyrix_did & 0xf000) == 0x3000) { cpu_class = CPUCLASS_586; strcat(cpu_model, "GXm"); } else strcat(cpu_model, "MediaGX"); break; case 0x50: strcat(cpu_model, "6x86MX"); break; case 0xf0: switch (cyrix_did & 0x0f) { case 0x0d: strcat(cpu_model, "Overdrive CPU"); break; case 0x0e: strcpy(cpu_model, "Texas Instruments 486SXL"); break; case 0x0f: strcat(cpu_model, "486SLC/DLC"); break; default: strcat(cpu_model, "Unknown"); break; } break; default: strcat(cpu_model, "Unknown"); break; } break; } break; case CPU_VENDOR_RISE: strcpy(cpu_model, "Rise "); switch (cpu_id & 0xff0) { case 0x500: /* 6401 and 6441 (Kirin) */ case 0x520: /* 6510 (Lynx) */ strcat(cpu_model, "mP6"); break; default: strcat(cpu_model, "Unknown"); } break; #endif case CPU_VENDOR_CENTAUR: #ifdef __i386__ switch (cpu_id & 0xff0) { case 0x540: strcpy(cpu_model, "IDT WinChip C6"); break; case 0x580: strcpy(cpu_model, "IDT WinChip 2"); break; case 0x590: strcpy(cpu_model, "IDT WinChip 3"); break; case 0x660: strcpy(cpu_model, "VIA C3 Samuel"); break; case 0x670: if (cpu_id & 0x8) strcpy(cpu_model, "VIA C3 Ezra"); else strcpy(cpu_model, "VIA C3 Samuel 2"); break; case 0x680: strcpy(cpu_model, "VIA C3 Ezra-T"); break; case 0x690: strcpy(cpu_model, "VIA C3 Nehemiah"); break; case 0x6a0: case 0x6d0: strcpy(cpu_model, "VIA C7 Esther"); break; case 0x6f0: strcpy(cpu_model, "VIA Nano"); break; default: strcpy(cpu_model, "VIA/IDT Unknown"); } #else strcpy(cpu_model, "VIA "); if ((cpu_id & 0xff0) == 0x6f0) strcat(cpu_model, "Nano Processor"); else strcat(cpu_model, "Unknown"); #endif break; #ifdef __i386__ case CPU_VENDOR_IBM: strcpy(cpu_model, "Blue Lightning CPU"); break; case CPU_VENDOR_NSC: switch (cpu_id & 0xff0) { case 0x540: strcpy(cpu_model, "Geode SC1100"); cpu = CPU_GEODE1100; break; default: strcpy(cpu_model, "Geode/NSC unknown"); break; } break; #endif default: strcat(cpu_model, "Unknown"); break; } /* * Replace cpu_model with cpu_brand minus leading spaces if * we have one. */ brand = cpu_brand; while (*brand == ' ') ++brand; if (*brand != '\0') strcpy(cpu_model, brand); printf("%s (", cpu_model); if (tsc_freq != 0) { hw_clockrate = (tsc_freq + 5000) / 1000000; printf("%jd.%02d-MHz ", (intmax_t)(tsc_freq + 4999) / 1000000, (u_int)((tsc_freq + 4999) / 10000) % 100); } switch(cpu_class) { #ifdef __i386__ case CPUCLASS_286: printf("286"); break; case CPUCLASS_386: printf("386"); break; #if defined(I486_CPU) case CPUCLASS_486: printf("486"); break; #endif #if defined(I586_CPU) case CPUCLASS_586: printf("586"); break; #endif #if defined(I686_CPU) case CPUCLASS_686: printf("686"); break; #endif #else case CPUCLASS_K8: printf("K8"); break; #endif default: printf("Unknown"); /* will panic below... */ } printf("-class CPU)\n"); if (*cpu_vendor) printf(" Origin=\"%s\"", cpu_vendor); if (cpu_id) printf(" Id=0x%x", cpu_id); if (cpu_vendor_id == CPU_VENDOR_INTEL || cpu_vendor_id == CPU_VENDOR_AMD || cpu_vendor_id == CPU_VENDOR_CENTAUR || #ifdef __i386__ cpu_vendor_id == CPU_VENDOR_TRANSMETA || cpu_vendor_id == CPU_VENDOR_RISE || cpu_vendor_id == CPU_VENDOR_NSC || (cpu_vendor_id == CPU_VENDOR_CYRIX && ((cpu_id & 0xf00) > 0x500)) || #endif 0) { printf(" Family=0x%x", CPUID_TO_FAMILY(cpu_id)); printf(" Model=0x%x", CPUID_TO_MODEL(cpu_id)); printf(" Stepping=%u", cpu_id & CPUID_STEPPING); #ifdef __i386__ if (cpu_vendor_id == CPU_VENDOR_CYRIX) printf("\n DIR=0x%04x", cyrix_did); #endif /* * AMD CPUID Specification * http://support.amd.com/us/Embedded_TechDocs/25481.pdf * * Intel Processor Identification and CPUID Instruction * http://www.intel.com/assets/pdf/appnote/241618.pdf */ if (cpu_high > 0) { /* * Here we should probably set up flags indicating * whether or not various features are available. * The interesting ones are probably VME, PSE, PAE, * and PGE. The code already assumes without bothering * to check that all CPUs >= Pentium have a TSC and * MSRs. */ printf("\n Features=0x%b", cpu_feature, "\020" "\001FPU" /* Integral FPU */ "\002VME" /* Extended VM86 mode support */ "\003DE" /* Debugging Extensions (CR4.DE) */ "\004PSE" /* 4MByte page tables */ "\005TSC" /* Timestamp counter */ "\006MSR" /* Machine specific registers */ "\007PAE" /* Physical address extension */ "\010MCE" /* Machine Check support */ "\011CX8" /* CMPEXCH8 instruction */ "\012APIC" /* SMP local APIC */ "\013oldMTRR" /* Previous implementation of MTRR */ "\014SEP" /* Fast System Call */ "\015MTRR" /* Memory Type Range Registers */ "\016PGE" /* PG_G (global bit) support */ "\017MCA" /* Machine Check Architecture */ "\020CMOV" /* CMOV instruction */ "\021PAT" /* Page attributes table */ "\022PSE36" /* 36 bit address space support */ "\023PN" /* Processor Serial number */ "\024CLFLUSH" /* Has the CLFLUSH instruction */ "\025" "\026DTS" /* Debug Trace Store */ "\027ACPI" /* ACPI support */ "\030MMX" /* MMX instructions */ "\031FXSR" /* FXSAVE/FXRSTOR */ "\032SSE" /* Streaming SIMD Extensions */ "\033SSE2" /* Streaming SIMD Extensions #2 */ "\034SS" /* Self snoop */ "\035HTT" /* Hyperthreading (see EBX bit 16-23) */ "\036TM" /* Thermal Monitor clock slowdown */ "\037IA64" /* CPU can execute IA64 instructions */ "\040PBE" /* Pending Break Enable */ ); if (cpu_feature2 != 0) { printf("\n Features2=0x%b", cpu_feature2, "\020" "\001SSE3" /* SSE3 */ "\002PCLMULQDQ" /* Carry-Less Mul Quadword */ "\003DTES64" /* 64-bit Debug Trace */ "\004MON" /* MONITOR/MWAIT Instructions */ "\005DS_CPL" /* CPL Qualified Debug Store */ "\006VMX" /* Virtual Machine Extensions */ "\007SMX" /* Safer Mode Extensions */ "\010EST" /* Enhanced SpeedStep */ "\011TM2" /* Thermal Monitor 2 */ "\012SSSE3" /* SSSE3 */ "\013CNXT-ID" /* L1 context ID available */ "\014SDBG" /* IA32 silicon debug */ "\015FMA" /* Fused Multiply Add */ "\016CX16" /* CMPXCHG16B Instruction */ "\017xTPR" /* Send Task Priority Messages*/ "\020PDCM" /* Perf/Debug Capability MSR */ "\021" "\022PCID" /* Process-context Identifiers*/ "\023DCA" /* Direct Cache Access */ "\024SSE4.1" /* SSE 4.1 */ "\025SSE4.2" /* SSE 4.2 */ "\026x2APIC" /* xAPIC Extensions */ "\027MOVBE" /* MOVBE Instruction */ "\030POPCNT" /* POPCNT Instruction */ "\031TSCDLT" /* TSC-Deadline Timer */ "\032AESNI" /* AES Crypto */ "\033XSAVE" /* XSAVE/XRSTOR States */ "\034OSXSAVE" /* OS-Enabled State Management*/ "\035AVX" /* Advanced Vector Extensions */ "\036F16C" /* Half-precision conversions */ "\037RDRAND" /* RDRAND Instruction */ "\040HV" /* Hypervisor */ ); } if (amd_feature != 0) { printf("\n AMD Features=0x%b", amd_feature, "\020" /* in hex */ "\001" /* Same */ "\002" /* Same */ "\003" /* Same */ "\004" /* Same */ "\005" /* Same */ "\006" /* Same */ "\007" /* Same */ "\010" /* Same */ "\011" /* Same */ "\012" /* Same */ "\013" /* Undefined */ "\014SYSCALL" /* Have SYSCALL/SYSRET */ "\015" /* Same */ "\016" /* Same */ "\017" /* Same */ "\020" /* Same */ "\021" /* Same */ "\022" /* Same */ "\023" /* Reserved, unknown */ "\024MP" /* Multiprocessor Capable */ "\025NX" /* Has EFER.NXE, NX */ "\026" /* Undefined */ "\027MMX+" /* AMD MMX Extensions */ "\030" /* Same */ "\031" /* Same */ "\032FFXSR" /* Fast FXSAVE/FXRSTOR */ "\033Page1GB" /* 1-GB large page support */ "\034RDTSCP" /* RDTSCP */ "\035" /* Undefined */ "\036LM" /* 64 bit long mode */ "\0373DNow!+" /* AMD 3DNow! Extensions */ "\0403DNow!" /* AMD 3DNow! */ ); } if (amd_feature2 != 0) { printf("\n AMD Features2=0x%b", amd_feature2, "\020" "\001LAHF" /* LAHF/SAHF in long mode */ "\002CMP" /* CMP legacy */ "\003SVM" /* Secure Virtual Mode */ "\004ExtAPIC" /* Extended APIC register */ "\005CR8" /* CR8 in legacy mode */ "\006ABM" /* LZCNT instruction */ "\007SSE4A" /* SSE4A */ "\010MAS" /* Misaligned SSE mode */ "\011Prefetch" /* 3DNow! Prefetch/PrefetchW */ "\012OSVW" /* OS visible workaround */ "\013IBS" /* Instruction based sampling */ "\014XOP" /* XOP extended instructions */ "\015SKINIT" /* SKINIT/STGI */ "\016WDT" /* Watchdog timer */ "\017" "\020LWP" /* Lightweight Profiling */ "\021FMA4" /* 4-operand FMA instructions */ "\022TCE" /* Translation Cache Extension */ "\023" "\024NodeId" /* NodeId MSR support */ "\025" "\026TBM" /* Trailing Bit Manipulation */ "\027Topology" /* Topology Extensions */ "\030PCXC" /* Core perf count */ "\031PNXC" /* NB perf count */ "\032" "\033DBE" /* Data Breakpoint extension */ "\034PTSC" /* Performance TSC */ "\035PL2I" /* L2I perf count */ "\036MWAITX" /* MONITORX/MWAITX instructions */ "\037" "\040" ); } if (cpu_stdext_feature != 0) { printf("\n Structured Extended Features=0x%b", cpu_stdext_feature, "\020" /* RDFSBASE/RDGSBASE/WRFSBASE/WRGSBASE */ "\001FSGSBASE" "\002TSCADJ" "\003SGX" /* Bit Manipulation Instructions */ "\004BMI1" /* Hardware Lock Elision */ "\005HLE" /* Advanced Vector Instructions 2 */ "\006AVX2" /* FDP_EXCPTN_ONLY */ "\007FDPEXC" /* Supervisor Mode Execution Prot. */ "\010SMEP" /* Bit Manipulation Instructions */ "\011BMI2" "\012ERMS" /* Invalidate Processor Context ID */ "\013INVPCID" /* Restricted Transactional Memory */ "\014RTM" "\015PQM" "\016NFPUSG" /* Intel Memory Protection Extensions */ "\017MPX" "\020PQE" /* AVX512 Foundation */ "\021AVX512F" /* Enhanced NRBG */ "\023RDSEED" /* ADCX + ADOX */ "\024ADX" /* Supervisor Mode Access Prevention */ "\025SMAP" "\030CLFLUSHOPT" "\032PROCTRACE" "\033AVX512PF" "\034AVX512ER" "\035AVX512CD" "\036SHA" ); } if (cpu_stdext_feature2 != 0) { printf("\n Structured Extended Features2=0x%b", cpu_stdext_feature2, "\020" "\001PREFETCHWT1" "\003UMIP" "\004PKU" "\005OSPKE" "\027RDPID" "\037SGXLC" ); } if ((cpu_feature2 & CPUID2_XSAVE) != 0) { cpuid_count(0xd, 0x1, regs); if (regs[0] != 0) { printf("\n XSAVE Features=0x%b", regs[0], "\020" "\001XSAVEOPT" "\002XSAVEC" "\003XINUSE" "\004XSAVES"); } } if (via_feature_rng != 0 || via_feature_xcrypt != 0) print_via_padlock_info(); if (cpu_feature2 & CPUID2_VMX) print_vmx_info(); if (amd_feature2 & AMDID2_SVM) print_svm_info(); if ((cpu_feature & CPUID_HTT) && cpu_vendor_id == CPU_VENDOR_AMD) cpu_feature &= ~CPUID_HTT; /* * If this CPU supports P-state invariant TSC then * mention the capability. */ if (tsc_is_invariant) { printf("\n TSC: P-state invariant"); if (tsc_perf_stat) printf(", performance statistics"); } } #ifdef __i386__ } else if (cpu_vendor_id == CPU_VENDOR_CYRIX) { printf(" DIR=0x%04x", cyrix_did); printf(" Stepping=%u", (cyrix_did & 0xf000) >> 12); printf(" Revision=%u", (cyrix_did & 0x0f00) >> 8); #ifndef CYRIX_CACHE_REALLY_WORKS if (cpu == CPU_M1 && (cyrix_did & 0xff00) < 0x1700) printf("\n CPU cache: write-through mode"); #endif #endif } /* Avoid ugly blank lines: only print newline when we have to. */ if (*cpu_vendor || cpu_id) printf("\n"); if (bootverbose) { if (cpu_vendor_id == CPU_VENDOR_AMD) print_AMD_info(); else if (cpu_vendor_id == CPU_VENDOR_INTEL) print_INTEL_info(); #ifdef __i386__ else if (cpu_vendor_id == CPU_VENDOR_TRANSMETA) print_transmeta_info(); #endif } print_hypervisor_info(); } void panicifcpuunsupported(void) { #ifdef __i386__ #if !defined(lint) #if !defined(I486_CPU) && !defined(I586_CPU) && !defined(I686_CPU) #error This kernel is not configured for one of the supported CPUs #endif #else /* lint */ #endif /* lint */ #else /* __amd64__ */ #ifndef HAMMER #error "You need to specify a cpu type" #endif #endif /* * Now that we have told the user what they have, * let them know if that machine type isn't configured. */ switch (cpu_class) { #ifdef __i386__ case CPUCLASS_286: /* a 286 should not make it this far, anyway */ case CPUCLASS_386: #if !defined(I486_CPU) case CPUCLASS_486: #endif #if !defined(I586_CPU) case CPUCLASS_586: #endif #if !defined(I686_CPU) case CPUCLASS_686: #endif #else /* __amd64__ */ case CPUCLASS_X86: #ifndef HAMMER case CPUCLASS_K8: #endif #endif panic("CPU class not configured"); default: break; } } #ifdef __i386__ static volatile u_int trap_by_rdmsr; /* * Special exception 6 handler. * The rdmsr instruction generates invalid opcodes fault on 486-class * Cyrix CPU. Stacked eip register points the rdmsr instruction in the * function identblue() when this handler is called. Stacked eip should * be advanced. */ inthand_t bluetrap6; #ifdef __GNUCLIKE_ASM __asm (" \n\ .text \n\ .p2align 2,0x90 \n\ .type " __XSTRING(CNAME(bluetrap6)) ",@function \n\ " __XSTRING(CNAME(bluetrap6)) ": \n\ ss \n\ movl $0xa8c1d," __XSTRING(CNAME(trap_by_rdmsr)) " \n\ addl $2, (%esp) /* rdmsr is a 2-byte instruction */ \n\ iret \n\ "); #endif /* * Special exception 13 handler. * Accessing non-existent MSR generates general protection fault. */ inthand_t bluetrap13; #ifdef __GNUCLIKE_ASM __asm (" \n\ .text \n\ .p2align 2,0x90 \n\ .type " __XSTRING(CNAME(bluetrap13)) ",@function \n\ " __XSTRING(CNAME(bluetrap13)) ": \n\ ss \n\ movl $0xa89c4," __XSTRING(CNAME(trap_by_rdmsr)) " \n\ popl %eax /* discard error code */ \n\ addl $2, (%esp) /* rdmsr is a 2-byte instruction */ \n\ iret \n\ "); #endif /* * Distinguish IBM Blue Lightning CPU from Cyrix CPUs that does not * support cpuid instruction. This function should be called after * loading interrupt descriptor table register. * * I don't like this method that handles fault, but I couldn't get * information for any other methods. Does blue giant know? */ static int identblue(void) { trap_by_rdmsr = 0; /* * Cyrix 486-class CPU does not support rdmsr instruction. * The rdmsr instruction generates invalid opcode fault, and exception * will be trapped by bluetrap6() on Cyrix 486-class CPU. The * bluetrap6() set the magic number to trap_by_rdmsr. */ setidt(IDT_UD, bluetrap6, SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); /* * Certain BIOS disables cpuid instruction of Cyrix 6x86MX CPU. * In this case, rdmsr generates general protection fault, and * exception will be trapped by bluetrap13(). */ setidt(IDT_GP, bluetrap13, SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); rdmsr(0x1002); /* Cyrix CPU generates fault. */ if (trap_by_rdmsr == 0xa8c1d) return IDENTBLUE_CYRIX486; else if (trap_by_rdmsr == 0xa89c4) return IDENTBLUE_CYRIXM2; return IDENTBLUE_IBMCPU; } /* * identifycyrix() set lower 16 bits of cyrix_did as follows: * * F E D C B A 9 8 7 6 5 4 3 2 1 0 * +-------+-------+---------------+ * | SID | RID | Device ID | * | (DIR 1) | (DIR 0) | * +-------+-------+---------------+ */ static void identifycyrix(void) { register_t saveintr; int ccr2_test = 0, dir_test = 0; u_char ccr2, ccr3; saveintr = intr_disable(); ccr2 = read_cyrix_reg(CCR2); write_cyrix_reg(CCR2, ccr2 ^ CCR2_LOCK_NW); read_cyrix_reg(CCR2); if (read_cyrix_reg(CCR2) != ccr2) ccr2_test = 1; write_cyrix_reg(CCR2, ccr2); ccr3 = read_cyrix_reg(CCR3); write_cyrix_reg(CCR3, ccr3 ^ CCR3_MAPEN3); read_cyrix_reg(CCR3); if (read_cyrix_reg(CCR3) != ccr3) dir_test = 1; /* CPU supports DIRs. */ write_cyrix_reg(CCR3, ccr3); if (dir_test) { /* Device ID registers are available. */ cyrix_did = read_cyrix_reg(DIR1) << 8; cyrix_did += read_cyrix_reg(DIR0); } else if (ccr2_test) cyrix_did = 0x0010; /* 486S A-step */ else cyrix_did = 0x00ff; /* Old 486SLC/DLC and TI486SXLC/SXL */ intr_restore(saveintr); } #endif /* Update TSC freq with the value indicated by the caller. */ static void tsc_freq_changed(void *arg __unused, const struct cf_level *level, int status) { /* If there was an error during the transition, don't do anything. */ if (status != 0) return; /* Total setting for this level gives the new frequency in MHz. */ hw_clockrate = level->total_set.freq; } static void hook_tsc_freq(void *arg __unused) { if (tsc_is_invariant) return; tsc_post_tag = EVENTHANDLER_REGISTER(cpufreq_post_change, tsc_freq_changed, NULL, EVENTHANDLER_PRI_ANY); } SYSINIT(hook_tsc_freq, SI_SUB_CONFIGURE, SI_ORDER_ANY, hook_tsc_freq, NULL); #ifndef XEN static const char *const vm_bnames[] = { "QEMU", /* QEMU */ "Plex86", /* Plex86 */ "Bochs", /* Bochs */ "Xen", /* Xen */ "BHYVE", /* bhyve */ "Seabios", /* KVM */ NULL }; static const char *const vm_pnames[] = { "VMware Virtual Platform", /* VMWare VM */ "Virtual Machine", /* Microsoft VirtualPC */ "VirtualBox", /* Sun xVM VirtualBox */ "Parallels Virtual Platform", /* Parallels VM */ "KVM", /* KVM */ NULL }; -static void +void identify_hypervisor(void) { u_int regs[4]; char *p; int i; /* * [RFC] CPUID usage for interaction between Hypervisors and Linux. * http://lkml.org/lkml/2008/10/1/246 * * KB1009458: Mechanisms to determine if software is running in * a VMware virtual machine * http://kb.vmware.com/kb/1009458 */ if (cpu_feature2 & CPUID2_HV) { vm_guest = VM_GUEST_VM; do_cpuid(0x40000000, regs); if (regs[0] >= 0x40000000) { hv_high = regs[0]; ((u_int *)&hv_vendor)[0] = regs[1]; ((u_int *)&hv_vendor)[1] = regs[2]; ((u_int *)&hv_vendor)[2] = regs[3]; hv_vendor[12] = '\0'; if (strcmp(hv_vendor, "VMwareVMware") == 0) vm_guest = VM_GUEST_VMWARE; else if (strcmp(hv_vendor, "Microsoft Hv") == 0) vm_guest = VM_GUEST_HV; } return; } /* * Examine SMBIOS strings for older hypervisors. */ p = getenv("smbios.system.serial"); if (p != NULL) { if (strncmp(p, "VMware-", 7) == 0 || strncmp(p, "VMW", 3) == 0) { vmware_hvcall(VMW_HVCMD_GETVERSION, regs); if (regs[1] == VMW_HVMAGIC) { vm_guest = VM_GUEST_VMWARE; freeenv(p); return; } } freeenv(p); } /* * XXX: Some of these entries may not be needed since they were * added to FreeBSD before the checks above. */ p = getenv("smbios.bios.vendor"); if (p != NULL) { for (i = 0; vm_bnames[i] != NULL; i++) if (strcmp(p, vm_bnames[i]) == 0) { vm_guest = VM_GUEST_VM; freeenv(p); return; } freeenv(p); } p = getenv("smbios.system.product"); if (p != NULL) { for (i = 0; vm_pnames[i] != NULL; i++) if (strcmp(p, vm_pnames[i]) == 0) { vm_guest = VM_GUEST_VM; freeenv(p); return; } freeenv(p); } } #endif bool fix_cpuid(void) { uint64_t msr; /* * Clear "Limit CPUID Maxval" bit and return true if the caller should * get the largest standard CPUID function number again if it is set * from BIOS. It is necessary for probing correct CPU topology later * and for the correct operation of the AVX-aware userspace. */ if (cpu_vendor_id == CPU_VENDOR_INTEL && ((CPUID_TO_FAMILY(cpu_id) == 0xf && CPUID_TO_MODEL(cpu_id) >= 0x3) || (CPUID_TO_FAMILY(cpu_id) == 0x6 && CPUID_TO_MODEL(cpu_id) >= 0xe))) { msr = rdmsr(MSR_IA32_MISC_ENABLE); if ((msr & IA32_MISC_EN_LIMCPUID) != 0) { msr &= ~IA32_MISC_EN_LIMCPUID; wrmsr(MSR_IA32_MISC_ENABLE, msr); return (true); } } /* * Re-enable AMD Topology Extension that could be disabled by BIOS * on some notebook processors. Without the extension it's really * hard to determine the correct CPU cache topology. * See BIOS and Kernel Developer’s Guide (BKDG) for AMD Family 15h * Models 60h-6Fh Processors, Publication # 50742. */ if (cpu_vendor_id == CPU_VENDOR_AMD && CPUID_TO_FAMILY(cpu_id) == 0x15) { msr = rdmsr(MSR_EXTFEATURES); if ((msr & ((uint64_t)1 << 54)) == 0) { msr |= (uint64_t)1 << 54; wrmsr(MSR_EXTFEATURES, msr); return (true); } } return (false); } /* * Final stage of CPU identification. */ #ifdef __i386__ void finishidentcpu(void) #else void identify_cpu(void) #endif { u_int regs[4], cpu_stdext_disable; #ifdef __i386__ u_char ccr3; #endif #ifdef __amd64__ do_cpuid(0, regs); cpu_high = regs[0]; ((u_int *)&cpu_vendor)[0] = regs[1]; ((u_int *)&cpu_vendor)[1] = regs[3]; ((u_int *)&cpu_vendor)[2] = regs[2]; cpu_vendor[12] = '\0'; do_cpuid(1, regs); cpu_id = regs[0]; cpu_procinfo = regs[1]; cpu_feature = regs[3]; cpu_feature2 = regs[2]; #endif -#ifndef XEN - identify_hypervisor(); -#endif cpu_vendor_id = find_cpu_vendor_id(); if (fix_cpuid()) { do_cpuid(0, regs); cpu_high = regs[0]; } if (cpu_high >= 5 && (cpu_feature2 & CPUID2_MON) != 0) { do_cpuid(5, regs); cpu_mon_mwait_flags = regs[2]; cpu_mon_min_size = regs[0] & CPUID5_MON_MIN_SIZE; cpu_mon_max_size = regs[1] & CPUID5_MON_MAX_SIZE; } if (cpu_high >= 7) { cpuid_count(7, 0, regs); cpu_stdext_feature = regs[1]; /* * Some hypervisors fail to filter out unsupported * extended features. For now, disable the * extensions, activation of which requires setting a * bit in CR4, and which VM monitors do not support. */ if (cpu_feature2 & CPUID2_HV) { cpu_stdext_disable = CPUID_STDEXT_FSGSBASE | CPUID_STDEXT_SMEP; } else cpu_stdext_disable = 0; TUNABLE_INT_FETCH("hw.cpu_stdext_disable", &cpu_stdext_disable); cpu_stdext_feature &= ~cpu_stdext_disable; cpu_stdext_feature2 = regs[2]; } #ifdef __i386__ if (cpu_high > 0 && (cpu_vendor_id == CPU_VENDOR_INTEL || cpu_vendor_id == CPU_VENDOR_AMD || cpu_vendor_id == CPU_VENDOR_TRANSMETA || cpu_vendor_id == CPU_VENDOR_CENTAUR || cpu_vendor_id == CPU_VENDOR_NSC)) { do_cpuid(0x80000000, regs); if (regs[0] >= 0x80000000) cpu_exthigh = regs[0]; } #else if (cpu_vendor_id == CPU_VENDOR_INTEL || cpu_vendor_id == CPU_VENDOR_AMD || cpu_vendor_id == CPU_VENDOR_CENTAUR) { do_cpuid(0x80000000, regs); cpu_exthigh = regs[0]; } #endif if (cpu_exthigh >= 0x80000001) { do_cpuid(0x80000001, regs); amd_feature = regs[3] & ~(cpu_feature & 0x0183f3ff); amd_feature2 = regs[2]; } if (cpu_exthigh >= 0x80000007) { do_cpuid(0x80000007, regs); amd_pminfo = regs[3]; } if (cpu_exthigh >= 0x80000008) { do_cpuid(0x80000008, regs); cpu_maxphyaddr = regs[0] & 0xff; cpu_procinfo2 = regs[2]; } else { cpu_maxphyaddr = (cpu_feature & CPUID_PAE) != 0 ? 36 : 32; } #ifdef __i386__ if (cpu_vendor_id == CPU_VENDOR_CYRIX) { if (cpu == CPU_486) { /* * These conditions are equivalent to: * - CPU does not support cpuid instruction. * - Cyrix/IBM CPU is detected. */ if (identblue() == IDENTBLUE_IBMCPU) { strcpy(cpu_vendor, "IBM"); cpu_vendor_id = CPU_VENDOR_IBM; cpu = CPU_BLUE; return; } } switch (cpu_id & 0xf00) { case 0x600: /* * Cyrix's datasheet does not describe DIRs. * Therefor, I assume it does not have them * and use the result of the cpuid instruction. * XXX they seem to have it for now at least. -Peter */ identifycyrix(); cpu = CPU_M2; break; default: identifycyrix(); /* * This routine contains a trick. * Don't check (cpu_id & 0x00f0) == 0x50 to detect M2, now. */ switch (cyrix_did & 0x00f0) { case 0x00: case 0xf0: cpu = CPU_486DLC; break; case 0x10: cpu = CPU_CY486DX; break; case 0x20: if ((cyrix_did & 0x000f) < 8) cpu = CPU_M1; else cpu = CPU_M1SC; break; case 0x30: cpu = CPU_M1; break; case 0x40: /* MediaGX CPU */ cpu = CPU_M1SC; break; default: /* M2 and later CPUs are treated as M2. */ cpu = CPU_M2; /* * enable cpuid instruction. */ ccr3 = read_cyrix_reg(CCR3); write_cyrix_reg(CCR3, CCR3_MAPEN0); write_cyrix_reg(CCR4, read_cyrix_reg(CCR4) | CCR4_CPUID); write_cyrix_reg(CCR3, ccr3); do_cpuid(0, regs); cpu_high = regs[0]; /* eax */ do_cpuid(1, regs); cpu_id = regs[0]; /* eax */ cpu_feature = regs[3]; /* edx */ break; } } } else if (cpu == CPU_486 && *cpu_vendor == '\0') { /* * There are BlueLightning CPUs that do not change * undefined flags by dividing 5 by 2. In this case, * the CPU identification routine in locore.s leaves * cpu_vendor null string and puts CPU_486 into the * cpu. */ if (identblue() == IDENTBLUE_IBMCPU) { strcpy(cpu_vendor, "IBM"); cpu_vendor_id = CPU_VENDOR_IBM; cpu = CPU_BLUE; return; } } #else /* XXX */ cpu = CPU_CLAWHAMMER; #endif } static u_int find_cpu_vendor_id(void) { int i; for (i = 0; i < sizeof(cpu_vendors) / sizeof(cpu_vendors[0]); i++) if (strcmp(cpu_vendor, cpu_vendors[i].vendor) == 0) return (cpu_vendors[i].vendor_id); return (0); } static void print_AMD_assoc(int i) { if (i == 255) printf(", fully associative\n"); else printf(", %d-way associative\n", i); } static void print_AMD_l2_assoc(int i) { switch (i & 0x0f) { case 0: printf(", disabled/not present\n"); break; case 1: printf(", direct mapped\n"); break; case 2: printf(", 2-way associative\n"); break; case 4: printf(", 4-way associative\n"); break; case 6: printf(", 8-way associative\n"); break; case 8: printf(", 16-way associative\n"); break; case 15: printf(", fully associative\n"); break; default: printf(", reserved configuration\n"); break; } } static void print_AMD_info(void) { #ifdef __i386__ uint64_t amd_whcr; #endif u_int regs[4]; if (cpu_exthigh >= 0x80000005) { do_cpuid(0x80000005, regs); printf("L1 2MB data TLB: %d entries", (regs[0] >> 16) & 0xff); print_AMD_assoc(regs[0] >> 24); printf("L1 2MB instruction TLB: %d entries", regs[0] & 0xff); print_AMD_assoc((regs[0] >> 8) & 0xff); printf("L1 4KB data TLB: %d entries", (regs[1] >> 16) & 0xff); print_AMD_assoc(regs[1] >> 24); printf("L1 4KB instruction TLB: %d entries", regs[1] & 0xff); print_AMD_assoc((regs[1] >> 8) & 0xff); printf("L1 data cache: %d kbytes", regs[2] >> 24); printf(", %d bytes/line", regs[2] & 0xff); printf(", %d lines/tag", (regs[2] >> 8) & 0xff); print_AMD_assoc((regs[2] >> 16) & 0xff); printf("L1 instruction cache: %d kbytes", regs[3] >> 24); printf(", %d bytes/line", regs[3] & 0xff); printf(", %d lines/tag", (regs[3] >> 8) & 0xff); print_AMD_assoc((regs[3] >> 16) & 0xff); } if (cpu_exthigh >= 0x80000006) { do_cpuid(0x80000006, regs); if ((regs[0] >> 16) != 0) { printf("L2 2MB data TLB: %d entries", (regs[0] >> 16) & 0xfff); print_AMD_l2_assoc(regs[0] >> 28); printf("L2 2MB instruction TLB: %d entries", regs[0] & 0xfff); print_AMD_l2_assoc((regs[0] >> 28) & 0xf); } else { printf("L2 2MB unified TLB: %d entries", regs[0] & 0xfff); print_AMD_l2_assoc((regs[0] >> 28) & 0xf); } if ((regs[1] >> 16) != 0) { printf("L2 4KB data TLB: %d entries", (regs[1] >> 16) & 0xfff); print_AMD_l2_assoc(regs[1] >> 28); printf("L2 4KB instruction TLB: %d entries", (regs[1] >> 16) & 0xfff); print_AMD_l2_assoc((regs[1] >> 28) & 0xf); } else { printf("L2 4KB unified TLB: %d entries", (regs[1] >> 16) & 0xfff); print_AMD_l2_assoc((regs[1] >> 28) & 0xf); } printf("L2 unified cache: %d kbytes", regs[2] >> 16); printf(", %d bytes/line", regs[2] & 0xff); printf(", %d lines/tag", (regs[2] >> 8) & 0x0f); print_AMD_l2_assoc((regs[2] >> 12) & 0x0f); } #ifdef __i386__ if (((cpu_id & 0xf00) == 0x500) && (((cpu_id & 0x0f0) > 0x80) || (((cpu_id & 0x0f0) == 0x80) && (cpu_id & 0x00f) > 0x07))) { /* K6-2(new core [Stepping 8-F]), K6-III or later */ amd_whcr = rdmsr(0xc0000082); if (!(amd_whcr & (0x3ff << 22))) { printf("Write Allocate Disable\n"); } else { printf("Write Allocate Enable Limit: %dM bytes\n", (u_int32_t)((amd_whcr & (0x3ff << 22)) >> 22) * 4); printf("Write Allocate 15-16M bytes: %s\n", (amd_whcr & (1 << 16)) ? "Enable" : "Disable"); } } else if (((cpu_id & 0xf00) == 0x500) && ((cpu_id & 0x0f0) > 0x50)) { /* K6, K6-2(old core) */ amd_whcr = rdmsr(0xc0000082); if (!(amd_whcr & (0x7f << 1))) { printf("Write Allocate Disable\n"); } else { printf("Write Allocate Enable Limit: %dM bytes\n", (u_int32_t)((amd_whcr & (0x7f << 1)) >> 1) * 4); printf("Write Allocate 15-16M bytes: %s\n", (amd_whcr & 0x0001) ? "Enable" : "Disable"); printf("Hardware Write Allocate Control: %s\n", (amd_whcr & 0x0100) ? "Enable" : "Disable"); } } #endif /* * Opteron Rev E shows a bug as in very rare occasions a read memory * barrier is not performed as expected if it is followed by a * non-atomic read-modify-write instruction. * As long as that bug pops up very rarely (intensive machine usage * on other operating systems generally generates one unexplainable * crash any 2 months) and as long as a model specific fix would be * impractical at this stage, print out a warning string if the broken * model and family are identified. */ if (CPUID_TO_FAMILY(cpu_id) == 0xf && CPUID_TO_MODEL(cpu_id) >= 0x20 && CPUID_TO_MODEL(cpu_id) <= 0x3f) printf("WARNING: This architecture revision has known SMP " "hardware bugs which may cause random instability\n"); } static void print_INTEL_info(void) { u_int regs[4]; u_int rounds, regnum; u_int nwaycode, nway; if (cpu_high >= 2) { rounds = 0; do { do_cpuid(0x2, regs); if (rounds == 0 && (rounds = (regs[0] & 0xff)) == 0) break; /* we have a buggy CPU */ for (regnum = 0; regnum <= 3; ++regnum) { if (regs[regnum] & (1<<31)) continue; if (regnum != 0) print_INTEL_TLB(regs[regnum] & 0xff); print_INTEL_TLB((regs[regnum] >> 8) & 0xff); print_INTEL_TLB((regs[regnum] >> 16) & 0xff); print_INTEL_TLB((regs[regnum] >> 24) & 0xff); } } while (--rounds > 0); } if (cpu_exthigh >= 0x80000006) { do_cpuid(0x80000006, regs); nwaycode = (regs[2] >> 12) & 0x0f; if (nwaycode >= 0x02 && nwaycode <= 0x08) nway = 1 << (nwaycode / 2); else nway = 0; printf("L2 cache: %u kbytes, %u-way associative, %u bytes/line\n", (regs[2] >> 16) & 0xffff, nway, regs[2] & 0xff); } } static void print_INTEL_TLB(u_int data) { switch (data) { case 0x0: case 0x40: default: break; case 0x1: printf("Instruction TLB: 4 KB pages, 4-way set associative, 32 entries\n"); break; case 0x2: printf("Instruction TLB: 4 MB pages, fully associative, 2 entries\n"); break; case 0x3: printf("Data TLB: 4 KB pages, 4-way set associative, 64 entries\n"); break; case 0x4: printf("Data TLB: 4 MB Pages, 4-way set associative, 8 entries\n"); break; case 0x6: printf("1st-level instruction cache: 8 KB, 4-way set associative, 32 byte line size\n"); break; case 0x8: printf("1st-level instruction cache: 16 KB, 4-way set associative, 32 byte line size\n"); break; case 0x9: printf("1st-level instruction cache: 32 KB, 4-way set associative, 64 byte line size\n"); break; case 0xa: printf("1st-level data cache: 8 KB, 2-way set associative, 32 byte line size\n"); break; case 0xb: printf("Instruction TLB: 4 MByte pages, 4-way set associative, 4 entries\n"); break; case 0xc: printf("1st-level data cache: 16 KB, 4-way set associative, 32 byte line size\n"); break; case 0xd: printf("1st-level data cache: 16 KBytes, 4-way set associative, 64 byte line size"); break; case 0xe: printf("1st-level data cache: 24 KBytes, 6-way set associative, 64 byte line size\n"); break; case 0x1d: printf("2nd-level cache: 128 KBytes, 2-way set associative, 64 byte line size\n"); break; case 0x21: printf("2nd-level cache: 256 KBytes, 8-way set associative, 64 byte line size\n"); break; case 0x22: printf("3rd-level cache: 512 KB, 4-way set associative, sectored cache, 64 byte line size\n"); break; case 0x23: printf("3rd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x24: printf("2nd-level cache: 1 MBytes, 16-way set associative, 64 byte line size\n"); break; case 0x25: printf("3rd-level cache: 2 MB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x29: printf("3rd-level cache: 4 MB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x2c: printf("1st-level data cache: 32 KB, 8-way set associative, 64 byte line size\n"); break; case 0x30: printf("1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size\n"); break; case 0x39: /* De-listed in SDM rev. 54 */ printf("2nd-level cache: 128 KB, 4-way set associative, sectored cache, 64 byte line size\n"); break; case 0x3b: /* De-listed in SDM rev. 54 */ printf("2nd-level cache: 128 KB, 2-way set associative, sectored cache, 64 byte line size\n"); break; case 0x3c: /* De-listed in SDM rev. 54 */ printf("2nd-level cache: 256 KB, 4-way set associative, sectored cache, 64 byte line size\n"); break; case 0x41: printf("2nd-level cache: 128 KB, 4-way set associative, 32 byte line size\n"); break; case 0x42: printf("2nd-level cache: 256 KB, 4-way set associative, 32 byte line size\n"); break; case 0x43: printf("2nd-level cache: 512 KB, 4-way set associative, 32 byte line size\n"); break; case 0x44: printf("2nd-level cache: 1 MB, 4-way set associative, 32 byte line size\n"); break; case 0x45: printf("2nd-level cache: 2 MB, 4-way set associative, 32 byte line size\n"); break; case 0x46: printf("3rd-level cache: 4 MB, 4-way set associative, 64 byte line size\n"); break; case 0x47: printf("3rd-level cache: 8 MB, 8-way set associative, 64 byte line size\n"); break; case 0x48: printf("2nd-level cache: 3MByte, 12-way set associative, 64 byte line size\n"); break; case 0x49: if (CPUID_TO_FAMILY(cpu_id) == 0xf && CPUID_TO_MODEL(cpu_id) == 0x6) printf("3rd-level cache: 4MB, 16-way set associative, 64-byte line size\n"); else printf("2nd-level cache: 4 MByte, 16-way set associative, 64 byte line size"); break; case 0x4a: printf("3rd-level cache: 6MByte, 12-way set associative, 64 byte line size\n"); break; case 0x4b: printf("3rd-level cache: 8MByte, 16-way set associative, 64 byte line size\n"); break; case 0x4c: printf("3rd-level cache: 12MByte, 12-way set associative, 64 byte line size\n"); break; case 0x4d: printf("3rd-level cache: 16MByte, 16-way set associative, 64 byte line size\n"); break; case 0x4e: printf("2nd-level cache: 6MByte, 24-way set associative, 64 byte line size\n"); break; case 0x4f: printf("Instruction TLB: 4 KByte pages, 32 entries\n"); break; case 0x50: printf("Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries\n"); break; case 0x51: printf("Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128 entries\n"); break; case 0x52: printf("Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 256 entries\n"); break; case 0x55: printf("Instruction TLB: 2-MByte or 4-MByte pages, fully associative, 7 entries\n"); break; case 0x56: printf("Data TLB0: 4 MByte pages, 4-way set associative, 16 entries\n"); break; case 0x57: printf("Data TLB0: 4 KByte pages, 4-way associative, 16 entries\n"); break; case 0x59: printf("Data TLB0: 4 KByte pages, fully associative, 16 entries\n"); break; case 0x5a: printf("Data TLB0: 2-MByte or 4 MByte pages, 4-way set associative, 32 entries\n"); break; case 0x5b: printf("Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries\n"); break; case 0x5c: printf("Data TLB: 4 KB or 4 MB pages, fully associative, 128 entries\n"); break; case 0x5d: printf("Data TLB: 4 KB or 4 MB pages, fully associative, 256 entries\n"); break; case 0x60: printf("1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x61: printf("Instruction TLB: 4 KByte pages, fully associative, 48 entries\n"); break; case 0x63: printf("Data TLB: 2 MByte or 4 MByte pages, 4-way set associative, 32 entries and a separate array with 1 GByte pages, 4-way set associative, 4 entries\n"); break; case 0x64: printf("Data TLB: 4 KBytes pages, 4-way set associative, 512 entries\n"); break; case 0x66: printf("1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64 byte line size\n"); break; case 0x67: printf("1st-level data cache: 16 KB, 4-way set associative, sectored cache, 64 byte line size\n"); break; case 0x68: printf("1st-level data cache: 32 KB, 4 way set associative, sectored cache, 64 byte line size\n"); break; case 0x6a: printf("uTLB: 4KByte pages, 8-way set associative, 64 entries\n"); break; case 0x6b: printf("DTLB: 4KByte pages, 8-way set associative, 256 entries\n"); break; case 0x6c: printf("DTLB: 2M/4M pages, 8-way set associative, 128 entries\n"); break; case 0x6d: printf("DTLB: 1 GByte pages, fully associative, 16 entries\n"); break; case 0x70: printf("Trace cache: 12K-uops, 8-way set associative\n"); break; case 0x71: printf("Trace cache: 16K-uops, 8-way set associative\n"); break; case 0x72: printf("Trace cache: 32K-uops, 8-way set associative\n"); break; case 0x76: printf("Instruction TLB: 2M/4M pages, fully associative, 8 entries\n"); break; case 0x78: printf("2nd-level cache: 1 MB, 4-way set associative, 64-byte line size\n"); break; case 0x79: printf("2nd-level cache: 128 KB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x7a: printf("2nd-level cache: 256 KB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x7b: printf("2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x7c: printf("2nd-level cache: 1 MB, 8-way set associative, sectored cache, 64 byte line size\n"); break; case 0x7d: printf("2nd-level cache: 2-MB, 8-way set associative, 64-byte line size\n"); break; case 0x7f: printf("2nd-level cache: 512-KB, 2-way set associative, 64-byte line size\n"); break; case 0x80: printf("2nd-level cache: 512 KByte, 8-way set associative, 64-byte line size\n"); break; case 0x82: printf("2nd-level cache: 256 KB, 8-way set associative, 32 byte line size\n"); break; case 0x83: printf("2nd-level cache: 512 KB, 8-way set associative, 32 byte line size\n"); break; case 0x84: printf("2nd-level cache: 1 MB, 8-way set associative, 32 byte line size\n"); break; case 0x85: printf("2nd-level cache: 2 MB, 8-way set associative, 32 byte line size\n"); break; case 0x86: printf("2nd-level cache: 512 KB, 4-way set associative, 64 byte line size\n"); break; case 0x87: printf("2nd-level cache: 1 MB, 8-way set associative, 64 byte line size\n"); break; case 0xa0: printf("DTLB: 4k pages, fully associative, 32 entries\n"); break; case 0xb0: printf("Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries\n"); break; case 0xb1: printf("Instruction TLB: 2M pages, 4-way, 8 entries or 4M pages, 4-way, 4 entries\n"); break; case 0xb2: printf("Instruction TLB: 4KByte pages, 4-way set associative, 64 entries\n"); break; case 0xb3: printf("Data TLB: 4 KB Pages, 4-way set associative, 128 entries\n"); break; case 0xb4: printf("Data TLB1: 4 KByte pages, 4-way associative, 256 entries\n"); break; case 0xb5: printf("Instruction TLB: 4KByte pages, 8-way set associative, 64 entries\n"); break; case 0xb6: printf("Instruction TLB: 4KByte pages, 8-way set associative, 128 entries\n"); break; case 0xba: printf("Data TLB1: 4 KByte pages, 4-way associative, 64 entries\n"); break; case 0xc0: printf("Data TLB: 4 KByte and 4 MByte pages, 4-way associative, 8 entries\n"); break; case 0xc1: printf("Shared 2nd-Level TLB: 4 KByte/2MByte pages, 8-way associative, 1024 entries\n"); break; case 0xc2: printf("DTLB: 4 KByte/2 MByte pages, 4-way associative, 16 entries\n"); break; case 0xc3: printf("Shared 2nd-Level TLB: 4 KByte /2 MByte pages, 6-way associative, 1536 entries. Also 1GBbyte pages, 4-way, 16 entries\n"); break; case 0xc4: printf("DTLB: 2M/4M Byte pages, 4-way associative, 32 entries\n"); break; case 0xca: printf("Shared 2nd-Level TLB: 4 KByte pages, 4-way associative, 512 entries\n"); break; case 0xd0: printf("3rd-level cache: 512 KByte, 4-way set associative, 64 byte line size\n"); break; case 0xd1: printf("3rd-level cache: 1 MByte, 4-way set associative, 64 byte line size\n"); break; case 0xd2: printf("3rd-level cache: 2 MByte, 4-way set associative, 64 byte line size\n"); break; case 0xd6: printf("3rd-level cache: 1 MByte, 8-way set associative, 64 byte line size\n"); break; case 0xd7: printf("3rd-level cache: 2 MByte, 8-way set associative, 64 byte line size\n"); break; case 0xd8: printf("3rd-level cache: 4 MByte, 8-way set associative, 64 byte line size\n"); break; case 0xdc: printf("3rd-level cache: 1.5 MByte, 12-way set associative, 64 byte line size\n"); break; case 0xdd: printf("3rd-level cache: 3 MByte, 12-way set associative, 64 byte line size\n"); break; case 0xde: printf("3rd-level cache: 6 MByte, 12-way set associative, 64 byte line size\n"); break; case 0xe2: printf("3rd-level cache: 2 MByte, 16-way set associative, 64 byte line size\n"); break; case 0xe3: printf("3rd-level cache: 4 MByte, 16-way set associative, 64 byte line size\n"); break; case 0xe4: printf("3rd-level cache: 8 MByte, 16-way set associative, 64 byte line size\n"); break; case 0xea: printf("3rd-level cache: 12MByte, 24-way set associative, 64 byte line size\n"); break; case 0xeb: printf("3rd-level cache: 18MByte, 24-way set associative, 64 byte line size\n"); break; case 0xec: printf("3rd-level cache: 24MByte, 24-way set associative, 64 byte line size\n"); break; case 0xf0: printf("64-Byte prefetching\n"); break; case 0xf1: printf("128-Byte prefetching\n"); break; } } static void print_svm_info(void) { u_int features, regs[4]; uint64_t msr; int comma; printf("\n SVM: "); do_cpuid(0x8000000A, regs); features = regs[3]; msr = rdmsr(MSR_VM_CR); if ((msr & VM_CR_SVMDIS) == VM_CR_SVMDIS) printf("(disabled in BIOS) "); if (!bootverbose) { comma = 0; if (features & (1 << 0)) { printf("%sNP", comma ? "," : ""); comma = 1; } if (features & (1 << 3)) { printf("%sNRIP", comma ? "," : ""); comma = 1; } if (features & (1 << 5)) { printf("%sVClean", comma ? "," : ""); comma = 1; } if (features & (1 << 6)) { printf("%sAFlush", comma ? "," : ""); comma = 1; } if (features & (1 << 7)) { printf("%sDAssist", comma ? "," : ""); comma = 1; } printf("%sNAsids=%d", comma ? "," : "", regs[1]); return; } printf("Features=0x%b", features, "\020" "\001NP" /* Nested paging */ "\002LbrVirt" /* LBR virtualization */ "\003SVML" /* SVM lock */ "\004NRIPS" /* NRIP save */ "\005TscRateMsr" /* MSR based TSC rate control */ "\006VmcbClean" /* VMCB clean bits */ "\007FlushByAsid" /* Flush by ASID */ "\010DecodeAssist" /* Decode assist */ "\011" "\012" "\013PauseFilter" /* PAUSE intercept filter */ "\014" "\015PauseFilterThreshold" /* PAUSE filter threshold */ "\016AVIC" /* virtual interrupt controller */ ); printf("\nRevision=%d, ASIDs=%d", regs[0] & 0xff, regs[1]); } #ifdef __i386__ static void print_transmeta_info(void) { u_int regs[4], nreg = 0; do_cpuid(0x80860000, regs); nreg = regs[0]; if (nreg >= 0x80860001) { do_cpuid(0x80860001, regs); printf(" Processor revision %u.%u.%u.%u\n", (regs[1] >> 24) & 0xff, (regs[1] >> 16) & 0xff, (regs[1] >> 8) & 0xff, regs[1] & 0xff); } if (nreg >= 0x80860002) { do_cpuid(0x80860002, regs); printf(" Code Morphing Software revision %u.%u.%u-%u-%u\n", (regs[1] >> 24) & 0xff, (regs[1] >> 16) & 0xff, (regs[1] >> 8) & 0xff, regs[1] & 0xff, regs[2]); } if (nreg >= 0x80860006) { char info[65]; do_cpuid(0x80860003, (u_int*) &info[0]); do_cpuid(0x80860004, (u_int*) &info[16]); do_cpuid(0x80860005, (u_int*) &info[32]); do_cpuid(0x80860006, (u_int*) &info[48]); info[64] = 0; printf(" %s\n", info); } } #endif static void print_via_padlock_info(void) { u_int regs[4]; do_cpuid(0xc0000001, regs); printf("\n VIA Padlock Features=0x%b", regs[3], "\020" "\003RNG" /* RNG */ "\007AES" /* ACE */ "\011AES-CTR" /* ACE2 */ "\013SHA1,SHA256" /* PHE */ "\015RSA" /* PMM */ ); } static uint32_t vmx_settable(uint64_t basic, int msr, int true_msr) { uint64_t val; if (basic & (1ULL << 55)) val = rdmsr(true_msr); else val = rdmsr(msr); /* Just report the controls that can be set to 1. */ return (val >> 32); } static void print_vmx_info(void) { uint64_t basic, msr; uint32_t entry, exit, mask, pin, proc, proc2; int comma; printf("\n VT-x: "); msr = rdmsr(MSR_IA32_FEATURE_CONTROL); if (!(msr & IA32_FEATURE_CONTROL_VMX_EN)) printf("(disabled in BIOS) "); basic = rdmsr(MSR_VMX_BASIC); pin = vmx_settable(basic, MSR_VMX_PINBASED_CTLS, MSR_VMX_TRUE_PINBASED_CTLS); proc = vmx_settable(basic, MSR_VMX_PROCBASED_CTLS, MSR_VMX_TRUE_PROCBASED_CTLS); if (proc & PROCBASED_SECONDARY_CONTROLS) proc2 = vmx_settable(basic, MSR_VMX_PROCBASED_CTLS2, MSR_VMX_PROCBASED_CTLS2); else proc2 = 0; exit = vmx_settable(basic, MSR_VMX_EXIT_CTLS, MSR_VMX_TRUE_EXIT_CTLS); entry = vmx_settable(basic, MSR_VMX_ENTRY_CTLS, MSR_VMX_TRUE_ENTRY_CTLS); if (!bootverbose) { comma = 0; if (exit & VM_EXIT_SAVE_PAT && exit & VM_EXIT_LOAD_PAT && entry & VM_ENTRY_LOAD_PAT) { printf("%sPAT", comma ? "," : ""); comma = 1; } if (proc & PROCBASED_HLT_EXITING) { printf("%sHLT", comma ? "," : ""); comma = 1; } if (proc & PROCBASED_MTF) { printf("%sMTF", comma ? "," : ""); comma = 1; } if (proc & PROCBASED_PAUSE_EXITING) { printf("%sPAUSE", comma ? "," : ""); comma = 1; } if (proc2 & PROCBASED2_ENABLE_EPT) { printf("%sEPT", comma ? "," : ""); comma = 1; } if (proc2 & PROCBASED2_UNRESTRICTED_GUEST) { printf("%sUG", comma ? "," : ""); comma = 1; } if (proc2 & PROCBASED2_ENABLE_VPID) { printf("%sVPID", comma ? "," : ""); comma = 1; } if (proc & PROCBASED_USE_TPR_SHADOW && proc2 & PROCBASED2_VIRTUALIZE_APIC_ACCESSES && proc2 & PROCBASED2_VIRTUALIZE_X2APIC_MODE && proc2 & PROCBASED2_APIC_REGISTER_VIRTUALIZATION && proc2 & PROCBASED2_VIRTUAL_INTERRUPT_DELIVERY) { printf("%sVID", comma ? "," : ""); comma = 1; if (pin & PINBASED_POSTED_INTERRUPT) printf(",PostIntr"); } return; } mask = basic >> 32; printf("Basic Features=0x%b", mask, "\020" "\02132PA" /* 32-bit physical addresses */ "\022SMM" /* SMM dual-monitor */ "\027INS/OUTS" /* VM-exit info for INS and OUTS */ "\030TRUE" /* TRUE_CTLS MSRs */ ); printf("\n Pin-Based Controls=0x%b", pin, "\020" "\001ExtINT" /* External-interrupt exiting */ "\004NMI" /* NMI exiting */ "\006VNMI" /* Virtual NMIs */ "\007PreTmr" /* Activate VMX-preemption timer */ "\010PostIntr" /* Process posted interrupts */ ); printf("\n Primary Processor Controls=0x%b", proc, "\020" "\003INTWIN" /* Interrupt-window exiting */ "\004TSCOff" /* Use TSC offsetting */ "\010HLT" /* HLT exiting */ "\012INVLPG" /* INVLPG exiting */ "\013MWAIT" /* MWAIT exiting */ "\014RDPMC" /* RDPMC exiting */ "\015RDTSC" /* RDTSC exiting */ "\020CR3-LD" /* CR3-load exiting */ "\021CR3-ST" /* CR3-store exiting */ "\024CR8-LD" /* CR8-load exiting */ "\025CR8-ST" /* CR8-store exiting */ "\026TPR" /* Use TPR shadow */ "\027NMIWIN" /* NMI-window exiting */ "\030MOV-DR" /* MOV-DR exiting */ "\031IO" /* Unconditional I/O exiting */ "\032IOmap" /* Use I/O bitmaps */ "\034MTF" /* Monitor trap flag */ "\035MSRmap" /* Use MSR bitmaps */ "\036MONITOR" /* MONITOR exiting */ "\037PAUSE" /* PAUSE exiting */ ); if (proc & PROCBASED_SECONDARY_CONTROLS) printf("\n Secondary Processor Controls=0x%b", proc2, "\020" "\001APIC" /* Virtualize APIC accesses */ "\002EPT" /* Enable EPT */ "\003DT" /* Descriptor-table exiting */ "\004RDTSCP" /* Enable RDTSCP */ "\005x2APIC" /* Virtualize x2APIC mode */ "\006VPID" /* Enable VPID */ "\007WBINVD" /* WBINVD exiting */ "\010UG" /* Unrestricted guest */ "\011APIC-reg" /* APIC-register virtualization */ "\012VID" /* Virtual-interrupt delivery */ "\013PAUSE-loop" /* PAUSE-loop exiting */ "\014RDRAND" /* RDRAND exiting */ "\015INVPCID" /* Enable INVPCID */ "\016VMFUNC" /* Enable VM functions */ "\017VMCS" /* VMCS shadowing */ "\020EPT#VE" /* EPT-violation #VE */ "\021XSAVES" /* Enable XSAVES/XRSTORS */ ); printf("\n Exit Controls=0x%b", mask, "\020" "\003DR" /* Save debug controls */ /* Ignore Host address-space size */ "\015PERF" /* Load MSR_PERF_GLOBAL_CTRL */ "\020AckInt" /* Acknowledge interrupt on exit */ "\023PAT-SV" /* Save MSR_PAT */ "\024PAT-LD" /* Load MSR_PAT */ "\025EFER-SV" /* Save MSR_EFER */ "\026EFER-LD" /* Load MSR_EFER */ "\027PTMR-SV" /* Save VMX-preemption timer value */ ); printf("\n Entry Controls=0x%b", mask, "\020" "\003DR" /* Save debug controls */ /* Ignore IA-32e mode guest */ /* Ignore Entry to SMM */ /* Ignore Deactivate dual-monitor treatment */ "\016PERF" /* Load MSR_PERF_GLOBAL_CTRL */ "\017PAT" /* Load MSR_PAT */ "\020EFER" /* Load MSR_EFER */ ); if (proc & PROCBASED_SECONDARY_CONTROLS && (proc2 & (PROCBASED2_ENABLE_EPT | PROCBASED2_ENABLE_VPID)) != 0) { msr = rdmsr(MSR_VMX_EPT_VPID_CAP); mask = msr; printf("\n EPT Features=0x%b", mask, "\020" "\001XO" /* Execute-only translations */ "\007PW4" /* Page-walk length of 4 */ "\011UC" /* EPT paging-structure mem can be UC */ "\017WB" /* EPT paging-structure mem can be WB */ "\0212M" /* EPT PDE can map a 2-Mbyte page */ "\0221G" /* EPT PDPTE can map a 1-Gbyte page */ "\025INVEPT" /* INVEPT is supported */ "\026AD" /* Accessed and dirty flags for EPT */ "\032single" /* INVEPT single-context type */ "\033all" /* INVEPT all-context type */ ); mask = msr >> 32; printf("\n VPID Features=0x%b", mask, "\020" "\001INVVPID" /* INVVPID is supported */ "\011individual" /* INVVPID individual-address type */ "\012single" /* INVVPID single-context type */ "\013all" /* INVVPID all-context type */ /* INVVPID single-context-retaining-globals type */ "\014single-globals" ); } } static void print_hypervisor_info(void) { if (*hv_vendor) printf("Hypervisor: Origin = \"%s\"\n", hv_vendor); } Index: stable/10 =================================================================== --- stable/10 (revision 322204) +++ stable/10 (revision 322205) Property changes on: stable/10 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r322076