Index: head/sys/sys/ata.h =================================================================== --- head/sys/sys/ata.h (revision 321684) +++ head/sys/sys/ata.h (revision 321685) @@ -1,1015 +1,1015 @@ /*- * Copyright (c) 2000 - 2008 Søren Schmidt * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _SYS_ATA_H_ #define _SYS_ATA_H_ #include /* ATA/ATAPI device parameters */ struct ata_params { /*000*/ u_int16_t config; /* configuration info */ #define ATA_PROTO_MASK 0x8003 #define ATA_PROTO_ATAPI 0x8000 #define ATA_PROTO_ATAPI_12 0x8000 #define ATA_PROTO_ATAPI_16 0x8001 #define ATA_PROTO_CFA 0x848a #define ATA_ATAPI_TYPE_MASK 0x1f00 #define ATA_ATAPI_TYPE_DIRECT 0x0000 /* disk/floppy */ #define ATA_ATAPI_TYPE_TAPE 0x0100 /* streaming tape */ #define ATA_ATAPI_TYPE_CDROM 0x0500 /* CD-ROM device */ #define ATA_ATAPI_TYPE_OPTICAL 0x0700 /* optical disk */ #define ATA_DRQ_MASK 0x0060 #define ATA_DRQ_SLOW 0x0000 /* cpu 3 ms delay */ #define ATA_DRQ_INTR 0x0020 /* interrupt 10 ms delay */ #define ATA_DRQ_FAST 0x0040 /* accel 50 us delay */ #define ATA_RESP_INCOMPLETE 0x0004 /*001*/ u_int16_t cylinders; /* # of cylinders */ /*002*/ u_int16_t specconf; /* specific configuration */ /*003*/ u_int16_t heads; /* # heads */ u_int16_t obsolete4; u_int16_t obsolete5; /*006*/ u_int16_t sectors; /* # sectors/track */ /*007*/ u_int16_t vendor7[3]; /*010*/ u_int8_t serial[20]; /* serial number */ /*020*/ u_int16_t retired20; u_int16_t retired21; u_int16_t obsolete22; /*023*/ u_int8_t revision[8]; /* firmware revision */ /*027*/ u_int8_t model[40]; /* model name */ /*047*/ u_int16_t sectors_intr; /* sectors per interrupt */ /*048*/ u_int16_t usedmovsd; /* double word read/write? */ /*049*/ u_int16_t capabilities1; #define ATA_SUPPORT_DMA 0x0100 #define ATA_SUPPORT_LBA 0x0200 -#define ATA_SUPPORT_IORDY 0x0400 -#define ATA_SUPPORT_IORDYDIS 0x0800 +#define ATA_SUPPORT_IORDYDIS 0x0400 +#define ATA_SUPPORT_IORDY 0x0800 #define ATA_SUPPORT_OVERLAP 0x4000 /*050*/ u_int16_t capabilities2; /*051*/ u_int16_t retired_piomode; /* PIO modes 0-2 */ #define ATA_RETIRED_PIO_MASK 0x0300 /*052*/ u_int16_t retired_dmamode; /* DMA modes */ #define ATA_RETIRED_DMA_MASK 0x0003 /*053*/ u_int16_t atavalid; /* fields valid */ #define ATA_FLAG_54_58 0x0001 /* words 54-58 valid */ #define ATA_FLAG_64_70 0x0002 /* words 64-70 valid */ #define ATA_FLAG_88 0x0004 /* word 88 valid */ /*054*/ u_int16_t current_cylinders; /*055*/ u_int16_t current_heads; /*056*/ u_int16_t current_sectors; /*057*/ u_int16_t current_size_1; /*058*/ u_int16_t current_size_2; /*059*/ u_int16_t multi; #define ATA_MULTI_VALID 0x0100 /*060*/ u_int16_t lba_size_1; u_int16_t lba_size_2; u_int16_t obsolete62; /*063*/ u_int16_t mwdmamodes; /* multiword DMA modes */ /*064*/ u_int16_t apiomodes; /* advanced PIO modes */ /*065*/ u_int16_t mwdmamin; /* min. M/W DMA time/word ns */ /*066*/ u_int16_t mwdmarec; /* rec. M/W DMA time ns */ /*067*/ u_int16_t pioblind; /* min. PIO cycle w/o flow */ /*068*/ u_int16_t pioiordy; /* min. PIO cycle IORDY flow */ /*069*/ u_int16_t support3; #define ATA_SUPPORT_RZAT 0x0020 #define ATA_SUPPORT_DRAT 0x4000 #define ATA_SUPPORT_ZONE_MASK 0x0003 #define ATA_SUPPORT_ZONE_NR 0x0000 #define ATA_SUPPORT_ZONE_HOST_AWARE 0x0001 #define ATA_SUPPORT_ZONE_DEV_MANAGED 0x0002 u_int16_t reserved70; /*071*/ u_int16_t rlsovlap; /* rel time (us) for overlap */ /*072*/ u_int16_t rlsservice; /* rel time (us) for service */ u_int16_t reserved73; u_int16_t reserved74; /*075*/ u_int16_t queue; #define ATA_QUEUE_LEN(x) ((x) & 0x001f) /*76*/ u_int16_t satacapabilities; #define ATA_SATA_GEN1 0x0002 #define ATA_SATA_GEN2 0x0004 #define ATA_SATA_GEN3 0x0008 #define ATA_SUPPORT_NCQ 0x0100 #define ATA_SUPPORT_IFPWRMNGTRCV 0x0200 #define ATA_SUPPORT_PHYEVENTCNT 0x0400 #define ATA_SUPPORT_NCQ_UNLOAD 0x0800 #define ATA_SUPPORT_NCQ_PRIO 0x1000 #define ATA_SUPPORT_HAPST 0x2000 #define ATA_SUPPORT_DAPST 0x4000 #define ATA_SUPPORT_READLOGDMAEXT 0x8000 /*77*/ u_int16_t satacapabilities2; #define ATA_SATA_CURR_GEN_MASK 0x0006 #define ATA_SUPPORT_NCQ_STREAM 0x0010 #define ATA_SUPPORT_NCQ_QMANAGEMENT 0x0020 #define ATA_SUPPORT_RCVSND_FPDMA_QUEUED 0x0040 /*78*/ u_int16_t satasupport; #define ATA_SUPPORT_NONZERO 0x0002 #define ATA_SUPPORT_AUTOACTIVATE 0x0004 #define ATA_SUPPORT_IFPWRMNGT 0x0008 #define ATA_SUPPORT_INORDERDATA 0x0010 #define ATA_SUPPORT_ASYNCNOTIF 0x0020 #define ATA_SUPPORT_SOFTSETPRESERVE 0x0040 /*79*/ u_int16_t sataenabled; #define ATA_ENABLED_DAPST 0x0080 /*080*/ u_int16_t version_major; /*081*/ u_int16_t version_minor; struct { /*082/085*/ u_int16_t command1; #define ATA_SUPPORT_SMART 0x0001 #define ATA_SUPPORT_SECURITY 0x0002 #define ATA_SUPPORT_REMOVABLE 0x0004 #define ATA_SUPPORT_POWERMGT 0x0008 #define ATA_SUPPORT_PACKET 0x0010 #define ATA_SUPPORT_WRITECACHE 0x0020 #define ATA_SUPPORT_LOOKAHEAD 0x0040 #define ATA_SUPPORT_RELEASEIRQ 0x0080 #define ATA_SUPPORT_SERVICEIRQ 0x0100 #define ATA_SUPPORT_RESET 0x0200 #define ATA_SUPPORT_PROTECTED 0x0400 #define ATA_SUPPORT_WRITEBUFFER 0x1000 #define ATA_SUPPORT_READBUFFER 0x2000 #define ATA_SUPPORT_NOP 0x4000 /*083/086*/ u_int16_t command2; #define ATA_SUPPORT_MICROCODE 0x0001 #define ATA_SUPPORT_QUEUED 0x0002 #define ATA_SUPPORT_CFA 0x0004 #define ATA_SUPPORT_APM 0x0008 #define ATA_SUPPORT_NOTIFY 0x0010 #define ATA_SUPPORT_STANDBY 0x0020 #define ATA_SUPPORT_SPINUP 0x0040 #define ATA_SUPPORT_MAXSECURITY 0x0100 #define ATA_SUPPORT_AUTOACOUSTIC 0x0200 #define ATA_SUPPORT_ADDRESS48 0x0400 #define ATA_SUPPORT_OVERLAY 0x0800 #define ATA_SUPPORT_FLUSHCACHE 0x1000 #define ATA_SUPPORT_FLUSHCACHE48 0x2000 /*084/087*/ u_int16_t extension; #define ATA_SUPPORT_SMARTLOG 0x0001 #define ATA_SUPPORT_SMARTTEST 0x0002 #define ATA_SUPPORT_MEDIASN 0x0004 #define ATA_SUPPORT_MEDIAPASS 0x0008 #define ATA_SUPPORT_STREAMING 0x0010 #define ATA_SUPPORT_GENLOG 0x0020 #define ATA_SUPPORT_WRITEDMAFUAEXT 0x0040 #define ATA_SUPPORT_WRITEDMAQFUAEXT 0x0080 #define ATA_SUPPORT_64BITWWN 0x0100 #define ATA_SUPPORT_UNLOAD 0x2000 } __packed support, enabled; /*088*/ u_int16_t udmamodes; /* UltraDMA modes */ /*089*/ u_int16_t erase_time; /* time req'd in 2min units */ /*090*/ u_int16_t enhanced_erase_time; /* time req'd in 2min units */ /*091*/ u_int16_t apm_value; /*092*/ u_int16_t master_passwd_revision; /* password revision code */ /*093*/ u_int16_t hwres; #define ATA_CABLE_ID 0x2000 /*094*/ u_int16_t acoustic; #define ATA_ACOUSTIC_CURRENT(x) ((x) & 0x00ff) #define ATA_ACOUSTIC_VENDOR(x) (((x) & 0xff00) >> 8) /*095*/ u_int16_t stream_min_req_size; /*096*/ u_int16_t stream_transfer_time; /*097*/ u_int16_t stream_access_latency; /*098*/ u_int32_t stream_granularity; /*100*/ u_int16_t lba_size48_1; u_int16_t lba_size48_2; u_int16_t lba_size48_3; u_int16_t lba_size48_4; u_int16_t reserved104; /*105*/ u_int16_t max_dsm_blocks; /*106*/ u_int16_t pss; #define ATA_PSS_LSPPS 0x000F #define ATA_PSS_LSSABOVE512 0x1000 #define ATA_PSS_MULTLS 0x2000 #define ATA_PSS_VALID_MASK 0xC000 #define ATA_PSS_VALID_VALUE 0x4000 /*107*/ u_int16_t isd; /*108*/ u_int16_t wwn[4]; u_int16_t reserved112[5]; /*117*/ u_int16_t lss_1; /*118*/ u_int16_t lss_2; /*119*/ u_int16_t support2; #define ATA_SUPPORT_WRITEREADVERIFY 0x0002 #define ATA_SUPPORT_WRITEUNCORREXT 0x0004 #define ATA_SUPPORT_RWLOGDMAEXT 0x0008 #define ATA_SUPPORT_MICROCODE3 0x0010 #define ATA_SUPPORT_FREEFALL 0x0020 #define ATA_SUPPORT_SENSE_REPORT 0x0040 #define ATA_SUPPORT_EPC 0x0080 /*120*/ u_int16_t enabled2; #define ATA_ENABLED_WRITEREADVERIFY 0x0002 #define ATA_ENABLED_WRITEUNCORREXT 0x0004 #define ATA_ENABLED_FREEFALL 0x0020 #define ATA_ENABLED_SENSE_REPORT 0x0040 #define ATA_ENABLED_EPC 0x0080 u_int16_t reserved121[6]; /*127*/ u_int16_t removable_status; /*128*/ u_int16_t security_status; #define ATA_SECURITY_LEVEL 0x0100 /* 0: high, 1: maximum */ #define ATA_SECURITY_ENH_SUPP 0x0020 /* enhanced erase supported */ #define ATA_SECURITY_COUNT_EXP 0x0010 /* count expired */ #define ATA_SECURITY_FROZEN 0x0008 /* security config is frozen */ #define ATA_SECURITY_LOCKED 0x0004 /* drive is locked */ #define ATA_SECURITY_ENABLED 0x0002 /* ATA Security is enabled */ #define ATA_SECURITY_SUPPORTED 0x0001 /* ATA Security is supported */ u_int16_t reserved129[31]; /*160*/ u_int16_t cfa_powermode1; u_int16_t reserved161; /*162*/ u_int16_t cfa_kms_support; /*163*/ u_int16_t cfa_trueide_modes; /*164*/ u_int16_t cfa_memory_modes; u_int16_t reserved165[4]; /*169*/ u_int16_t support_dsm; #define ATA_SUPPORT_DSM_TRIM 0x0001 u_int16_t reserved170[6]; /*176*/ u_int8_t media_serial[60]; /*206*/ u_int16_t sct; u_int16_t reserved207[2]; /*209*/ u_int16_t lsalign; /*210*/ u_int16_t wrv_sectors_m3_1; u_int16_t wrv_sectors_m3_2; /*212*/ u_int16_t wrv_sectors_m2_1; u_int16_t wrv_sectors_m2_2; /*214*/ u_int16_t nv_cache_caps; /*215*/ u_int16_t nv_cache_size_1; u_int16_t nv_cache_size_2; /*217*/ u_int16_t media_rotation_rate; #define ATA_RATE_NOT_REPORTED 0x0000 #define ATA_RATE_NON_ROTATING 0x0001 u_int16_t reserved218; /*219*/ u_int16_t nv_cache_opt; /*220*/ u_int16_t wrv_mode; u_int16_t reserved221; /*222*/ u_int16_t transport_major; /*223*/ u_int16_t transport_minor; u_int16_t reserved224[31]; /*255*/ u_int16_t integrity; } __packed; /* ATA Dataset Management */ #define ATA_DSM_BLK_SIZE 512 #define ATA_DSM_BLK_RANGES 64 #define ATA_DSM_RANGE_SIZE 8 #define ATA_DSM_RANGE_MAX 65535 /* * ATA Device Register * * bit 7 Obsolete (was 1 in early ATA specs) * bit 6 Sets LBA/CHS mode. 1=LBA, 0=CHS * bit 5 Obsolete (was 1 in early ATA specs) * bit 4 1 = Slave Drive, 0 = Master Drive * bit 3-0 In LBA mode, 27-24 of address. In CHS mode, head number */ #define ATA_DEV_MASTER 0x00 #define ATA_DEV_SLAVE 0x10 #define ATA_DEV_LBA 0x40 /* ATA limits */ #define ATA_MAX_28BIT_LBA 268435455UL /* ATA Status Register */ #define ATA_STATUS_ERROR 0x01 #define ATA_STATUS_SENSE_AVAIL 0x02 #define ATA_STATUS_ALIGN_ERR 0x04 #define ATA_STATUS_DATA_REQ 0x08 #define ATA_STATUS_DEF_WRITE_ERR 0x10 #define ATA_STATUS_DEVICE_FAULT 0x20 #define ATA_STATUS_DEVICE_READY 0x40 #define ATA_STATUS_BUSY 0x80 /* ATA Error Register */ #define ATA_ERROR_ABORT 0x04 #define ATA_ERROR_ID_NOT_FOUND 0x10 /* ATA HPA Features */ #define ATA_HPA_FEAT_MAX_ADDR 0x00 #define ATA_HPA_FEAT_SET_PWD 0x01 #define ATA_HPA_FEAT_LOCK 0x02 #define ATA_HPA_FEAT_UNLOCK 0x03 #define ATA_HPA_FEAT_FREEZE 0x04 /* ATA transfer modes */ #define ATA_MODE_MASK 0x0f #define ATA_DMA_MASK 0xf0 #define ATA_PIO 0x00 #define ATA_PIO0 0x08 #define ATA_PIO1 0x09 #define ATA_PIO2 0x0a #define ATA_PIO3 0x0b #define ATA_PIO4 0x0c #define ATA_PIO_MAX 0x0f #define ATA_DMA 0x10 #define ATA_WDMA0 0x20 #define ATA_WDMA1 0x21 #define ATA_WDMA2 0x22 #define ATA_UDMA0 0x40 #define ATA_UDMA1 0x41 #define ATA_UDMA2 0x42 #define ATA_UDMA3 0x43 #define ATA_UDMA4 0x44 #define ATA_UDMA5 0x45 #define ATA_UDMA6 0x46 #define ATA_SA150 0x47 #define ATA_SA300 0x48 #define ATA_SA600 0x49 #define ATA_DMA_MAX 0x4f /* ATA commands */ #define ATA_NOP 0x00 /* NOP */ #define ATA_NF_FLUSHQUEUE 0x00 /* flush queued cmd's */ #define ATA_NF_AUTOPOLL 0x01 /* start autopoll function */ #define ATA_DATA_SET_MANAGEMENT 0x06 #define ATA_DSM_TRIM 0x01 #define ATA_DEVICE_RESET 0x08 /* reset device */ #define ATA_READ 0x20 /* read */ #define ATA_READ48 0x24 /* read 48bit LBA */ #define ATA_READ_DMA48 0x25 /* read DMA 48bit LBA */ #define ATA_READ_DMA_QUEUED48 0x26 /* read DMA QUEUED 48bit LBA */ #define ATA_READ_NATIVE_MAX_ADDRESS48 0x27 /* read native max addr 48bit */ #define ATA_READ_MUL48 0x29 /* read multi 48bit LBA */ #define ATA_READ_STREAM_DMA48 0x2a /* read DMA stream 48bit LBA */ #define ATA_READ_LOG_EXT 0x2f /* read log ext - PIO Data-In */ #define ATA_READ_STREAM48 0x2b /* read stream 48bit LBA */ #define ATA_WRITE 0x30 /* write */ #define ATA_WRITE48 0x34 /* write 48bit LBA */ #define ATA_WRITE_DMA48 0x35 /* write DMA 48bit LBA */ #define ATA_WRITE_DMA_QUEUED48 0x36 /* write DMA QUEUED 48bit LBA*/ #define ATA_SET_MAX_ADDRESS48 0x37 /* set max address 48bit */ #define ATA_WRITE_MUL48 0x39 /* write multi 48bit LBA */ #define ATA_WRITE_STREAM_DMA48 0x3a #define ATA_WRITE_STREAM48 0x3b #define ATA_WRITE_DMA_FUA48 0x3d #define ATA_WRITE_DMA_QUEUED_FUA48 0x3e #define ATA_WRITE_LOG_EXT 0x3f #define ATA_READ_VERIFY 0x40 #define ATA_READ_VERIFY48 0x42 #define ATA_WRITE_UNCORRECTABLE48 0x45 /* write uncorrectable 48bit LBA */ #define ATA_WU_PSEUDO 0x55 /* pseudo-uncorrectable error */ #define ATA_WU_FLAGGED 0xaa /* flagged-uncorrectable error */ #define ATA_READ_LOG_DMA_EXT 0x47 /* read log DMA ext - PIO Data-In */ #define ATA_ZAC_MANAGEMENT_IN 0x4a /* ZAC management in */ #define ATA_ZM_REPORT_ZONES 0x00 /* report zones */ #define ATA_READ_FPDMA_QUEUED 0x60 /* read DMA NCQ */ #define ATA_WRITE_FPDMA_QUEUED 0x61 /* write DMA NCQ */ #define ATA_NCQ_NON_DATA 0x63 /* NCQ non-data command */ #define ATA_ABORT_NCQ_QUEUE 0x00 /* abort NCQ queue */ #define ATA_DEADLINE_HANDLING 0x01 /* deadline handling */ #define ATA_SET_FEATURES 0x05 /* set features */ #define ATA_ZERO_EXT 0x06 /* zero ext */ #define ATA_NCQ_ZAC_MGMT_OUT 0x07 /* NCQ ZAC mgmt out no data */ #define ATA_SEND_FPDMA_QUEUED 0x64 /* send DMA NCQ */ #define ATA_SFPDMA_DSM 0x00 /* Data set management */ #define ATA_SFPDMA_DSM_TRIM 0x01 /* Set trim bit in auxiliary */ #define ATA_SFPDMA_HYBRID_EVICT 0x01 /* Hybrid Evict */ #define ATA_SFPDMA_WLDMA 0x02 /* Write Log DMA EXT */ #define ATA_SFPDMA_ZAC_MGMT_OUT 0x03 /* NCQ ZAC mgmt out w/data */ #define ATA_RECV_FPDMA_QUEUED 0x65 /* receive DMA NCQ */ #define ATA_RFPDMA_RL_DMA_EXT 0x00 /* Read Log DMA EXT */ #define ATA_RFPDMA_ZAC_MGMT_IN 0x02 /* NCQ ZAC mgmt in w/data */ #define ATA_SEP_ATTN 0x67 /* SEP request */ #define ATA_SEEK 0x70 /* seek */ #define ATA_ZAC_MANAGEMENT_OUT 0x9f /* ZAC management out */ #define ATA_ZM_CLOSE_ZONE 0x01 /* close zone */ #define ATA_ZM_FINISH_ZONE 0x02 /* finish zone */ #define ATA_ZM_OPEN_ZONE 0x03 /* open zone */ #define ATA_ZM_RWP 0x04 /* reset write pointer */ #define ATA_PACKET_CMD 0xa0 /* packet command */ #define ATA_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/ #define ATA_SERVICE 0xa2 /* service command */ #define ATA_SMART_CMD 0xb0 /* SMART command */ #define ATA_CFA_ERASE 0xc0 /* CFA erase */ #define ATA_READ_MUL 0xc4 /* read multi */ #define ATA_WRITE_MUL 0xc5 /* write multi */ #define ATA_SET_MULTI 0xc6 /* set multi size */ #define ATA_READ_DMA_QUEUED 0xc7 /* read DMA QUEUED */ #define ATA_READ_DMA 0xc8 /* read DMA */ #define ATA_WRITE_DMA 0xca /* write DMA */ #define ATA_WRITE_DMA_QUEUED 0xcc /* write DMA QUEUED */ #define ATA_WRITE_MUL_FUA48 0xce #define ATA_STANDBY_IMMEDIATE 0xe0 /* standby immediate */ #define ATA_IDLE_IMMEDIATE 0xe1 /* idle immediate */ #define ATA_STANDBY_CMD 0xe2 /* standby */ #define ATA_IDLE_CMD 0xe3 /* idle */ #define ATA_READ_BUFFER 0xe4 /* read buffer */ #define ATA_READ_PM 0xe4 /* read portmultiplier */ #define ATA_CHECK_POWER_MODE 0xe5 /* device power mode */ #define ATA_SLEEP 0xe6 /* sleep */ #define ATA_FLUSHCACHE 0xe7 /* flush cache to disk */ #define ATA_WRITE_PM 0xe8 /* write portmultiplier */ #define ATA_FLUSHCACHE48 0xea /* flush cache to disk */ #define ATA_ATA_IDENTIFY 0xec /* get ATA params */ #define ATA_SETFEATURES 0xef /* features command */ #define ATA_SF_ENAB_WCACHE 0x02 /* enable write cache */ #define ATA_SF_DIS_WCACHE 0x82 /* disable write cache */ #define ATA_SF_SETXFER 0x03 /* set transfer mode */ #define ATA_SF_APM 0x05 /* Enable APM feature set */ #define ATA_SF_ENAB_PUIS 0x06 /* enable PUIS */ #define ATA_SF_DIS_PUIS 0x86 /* disable PUIS */ #define ATA_SF_PUIS_SPINUP 0x07 /* PUIS spin-up */ #define ATA_SF_WRV 0x0b /* Enable Write-Read-Verify */ #define ATA_SF_DLC 0x0c /* Enable device life control */ #define ATA_SF_SATA 0x10 /* Enable use of SATA feature */ #define ATA_SF_FFC 0x41 /* Free-fall Control */ #define ATA_SF_MHIST 0x43 /* Set Max Host Sect. Times */ #define ATA_SF_RATE 0x45 /* Set Rate Basis */ #define ATA_SF_EPC 0x4A /* Extended Power Conditions */ #define ATA_SF_ENAB_RCACHE 0xaa /* enable readahead cache */ #define ATA_SF_DIS_RCACHE 0x55 /* disable readahead cache */ #define ATA_SF_ENAB_RELIRQ 0x5d /* enable release interrupt */ #define ATA_SF_DIS_RELIRQ 0xdd /* disable release interrupt */ #define ATA_SF_ENAB_SRVIRQ 0x5e /* enable service interrupt */ #define ATA_SF_DIS_SRVIRQ 0xde /* disable service interrupt */ #define ATA_SF_LPSAERC 0x62 /* Long Phys Sect Align ErrRep*/ #define ATA_SF_DSN 0x63 /* Device Stats Notification */ #define ATA_CHECK_POWER_MODE 0xe5 /* Check Power Mode */ #define ATA_SECURITY_SET_PASSWORD 0xf1 /* set drive password */ #define ATA_SECURITY_UNLOCK 0xf2 /* unlock drive using passwd */ #define ATA_SECURITY_ERASE_PREPARE 0xf3 /* prepare to erase drive */ #define ATA_SECURITY_ERASE_UNIT 0xf4 /* erase all blocks on drive */ #define ATA_SECURITY_FREEZE_LOCK 0xf5 /* freeze security config */ #define ATA_SECURITY_DISABLE_PASSWORD 0xf6 /* disable drive password */ #define ATA_READ_NATIVE_MAX_ADDRESS 0xf8 /* read native max address */ #define ATA_SET_MAX_ADDRESS 0xf9 /* set max address */ /* ATAPI commands */ #define ATAPI_TEST_UNIT_READY 0x00 /* check if device is ready */ #define ATAPI_REZERO 0x01 /* rewind */ #define ATAPI_REQUEST_SENSE 0x03 /* get sense data */ #define ATAPI_FORMAT 0x04 /* format unit */ #define ATAPI_READ 0x08 /* read data */ #define ATAPI_WRITE 0x0a /* write data */ #define ATAPI_WEOF 0x10 /* write filemark */ #define ATAPI_WF_WRITE 0x01 #define ATAPI_SPACE 0x11 /* space command */ #define ATAPI_SP_FM 0x01 #define ATAPI_SP_EOD 0x03 #define ATAPI_INQUIRY 0x12 /* get inquiry data */ #define ATAPI_MODE_SELECT 0x15 /* mode select */ #define ATAPI_ERASE 0x19 /* erase */ #define ATAPI_MODE_SENSE 0x1a /* mode sense */ #define ATAPI_START_STOP 0x1b /* start/stop unit */ #define ATAPI_SS_LOAD 0x01 #define ATAPI_SS_RETENSION 0x02 #define ATAPI_SS_EJECT 0x04 #define ATAPI_PREVENT_ALLOW 0x1e /* media removal */ #define ATAPI_READ_FORMAT_CAPACITIES 0x23 /* get format capacities */ #define ATAPI_READ_CAPACITY 0x25 /* get volume capacity */ #define ATAPI_READ_BIG 0x28 /* read data */ #define ATAPI_WRITE_BIG 0x2a /* write data */ #define ATAPI_LOCATE 0x2b /* locate to position */ #define ATAPI_READ_POSITION 0x34 /* read position */ #define ATAPI_SYNCHRONIZE_CACHE 0x35 /* flush buf, close channel */ #define ATAPI_WRITE_BUFFER 0x3b /* write device buffer */ #define ATAPI_READ_BUFFER 0x3c /* read device buffer */ #define ATAPI_READ_SUBCHANNEL 0x42 /* get subchannel info */ #define ATAPI_READ_TOC 0x43 /* get table of contents */ #define ATAPI_PLAY_10 0x45 /* play by lba */ #define ATAPI_PLAY_MSF 0x47 /* play by MSF address */ #define ATAPI_PLAY_TRACK 0x48 /* play by track number */ #define ATAPI_PAUSE 0x4b /* pause audio operation */ #define ATAPI_READ_DISK_INFO 0x51 /* get disk info structure */ #define ATAPI_READ_TRACK_INFO 0x52 /* get track info structure */ #define ATAPI_RESERVE_TRACK 0x53 /* reserve track */ #define ATAPI_SEND_OPC_INFO 0x54 /* send OPC structurek */ #define ATAPI_MODE_SELECT_BIG 0x55 /* set device parameters */ #define ATAPI_REPAIR_TRACK 0x58 /* repair track */ #define ATAPI_READ_MASTER_CUE 0x59 /* read master CUE info */ #define ATAPI_MODE_SENSE_BIG 0x5a /* get device parameters */ #define ATAPI_CLOSE_TRACK 0x5b /* close track/session */ #define ATAPI_READ_BUFFER_CAPACITY 0x5c /* get buffer capicity */ #define ATAPI_SEND_CUE_SHEET 0x5d /* send CUE sheet */ #define ATAPI_SERVICE_ACTION_IN 0x96 /* get service data */ #define ATAPI_BLANK 0xa1 /* blank the media */ #define ATAPI_SEND_KEY 0xa3 /* send DVD key structure */ #define ATAPI_REPORT_KEY 0xa4 /* get DVD key structure */ #define ATAPI_PLAY_12 0xa5 /* play by lba */ #define ATAPI_LOAD_UNLOAD 0xa6 /* changer control command */ #define ATAPI_READ_STRUCTURE 0xad /* get DVD structure */ #define ATAPI_PLAY_CD 0xb4 /* universal play command */ #define ATAPI_SET_SPEED 0xbb /* set drive speed */ #define ATAPI_MECH_STATUS 0xbd /* get changer status */ #define ATAPI_READ_CD 0xbe /* read data */ #define ATAPI_POLL_DSC 0xff /* poll DSC status bit */ struct ata_ioc_devices { int channel; char name[2][32]; struct ata_params params[2]; }; /* pr channel ATA ioctl calls */ #define IOCATAGMAXCHANNEL _IOR('a', 1, int) #define IOCATAREINIT _IOW('a', 2, int) #define IOCATAATTACH _IOW('a', 3, int) #define IOCATADETACH _IOW('a', 4, int) #define IOCATADEVICES _IOWR('a', 5, struct ata_ioc_devices) /* ATAPI request sense structure */ struct atapi_sense { u_int8_t error; /* current or deferred errors */ #define ATA_SENSE_VALID 0x80 u_int8_t segment; /* segment number */ u_int8_t key; /* sense key */ #define ATA_SENSE_KEY_MASK 0x0f /* sense key mask */ #define ATA_SENSE_NO_SENSE 0x00 /* no specific sense key info */ #define ATA_SENSE_RECOVERED_ERROR 0x01 /* command OK, data recovered */ #define ATA_SENSE_NOT_READY 0x02 /* no access to drive */ #define ATA_SENSE_MEDIUM_ERROR 0x03 /* non-recovered data error */ #define ATA_SENSE_HARDWARE_ERROR 0x04 /* non-recoverable HW failure */ #define ATA_SENSE_ILLEGAL_REQUEST 0x05 /* invalid command param(s) */ #define ATA_SENSE_UNIT_ATTENTION 0x06 /* media changed */ #define ATA_SENSE_DATA_PROTECT 0x07 /* write protect */ #define ATA_SENSE_BLANK_CHECK 0x08 /* blank check */ #define ATA_SENSE_VENDOR_SPECIFIC 0x09 /* vendor specific skey */ #define ATA_SENSE_COPY_ABORTED 0x0a /* copy aborted */ #define ATA_SENSE_ABORTED_COMMAND 0x0b /* command aborted, try again */ #define ATA_SENSE_EQUAL 0x0c /* equal */ #define ATA_SENSE_VOLUME_OVERFLOW 0x0d /* volume overflow */ #define ATA_SENSE_MISCOMPARE 0x0e /* data dont match the medium */ #define ATA_SENSE_RESERVED 0x0f #define ATA_SENSE_ILI 0x20; #define ATA_SENSE_EOM 0x40; #define ATA_SENSE_FILEMARK 0x80; u_int32_t cmd_info; /* cmd information */ u_int8_t sense_length; /* additional sense len (n-7) */ u_int32_t cmd_specific_info; /* additional cmd spec info */ u_int8_t asc; /* additional sense code */ u_int8_t ascq; /* additional sense code qual */ u_int8_t replaceable_unit_code; /* replaceable unit code */ u_int8_t specific; /* sense key specific */ #define ATA_SENSE_SPEC_VALID 0x80 #define ATA_SENSE_SPEC_MASK 0x7f u_int8_t specific1; /* sense key specific */ u_int8_t specific2; /* sense key specific */ } __packed; /* * SET FEATURES subcommands */ /* * SET FEATURES command * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A) * These values go in the LBA 3:0. */ #define ATA_SF_EPC_RESTORE 0x00 /* Restore Power Condition Settings */ #define ATA_SF_EPC_GOTO 0x01 /* Go To Power Condition */ #define ATA_SF_EPC_SET_TIMER 0x02 /* Set Power Condition Timer */ #define ATA_SF_EPC_SET_STATE 0x03 /* Set Power Condition State */ #define ATA_SF_EPC_ENABLE 0x04 /* Enable the EPC feature set */ #define ATA_SF_EPC_DISABLE 0x05 /* Disable the EPC feature set */ #define ATA_SF_EPC_SET_SOURCE 0x06 /* Set EPC Power Source */ /* * SET FEATURES command * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A) * Power Condition ID field * These values go in the count register. */ #define ATA_EPC_STANDBY_Z 0x00 /* Substate of PM2:Standby */ #define ATA_EPC_STANDBY_Y 0x01 /* Substate of PM2:Standby */ #define ATA_EPC_IDLE_A 0x81 /* Substate of PM1:Idle */ #define ATA_EPC_IDLE_B 0x82 /* Substate of PM1:Idle */ #define ATA_EPC_IDLE_C 0x83 /* Substate of PM1:Idle */ #define ATA_EPC_ALL 0xff /* All supported power conditions */ /* * SET FEATURES command * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A) * Restore Power Conditions Settings subcommand * These values go in the LBA register. */ #define ATA_SF_EPC_RST_DFLT 0x40 /* 1=Rst from Default, 0= from Saved */ #define ATA_SF_EPC_RST_SAVE 0x10 /* 1=Save on completion */ /* * SET FEATURES command * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A) * Got To Power Condition subcommand * These values go in the LBA register. */ #define ATA_SF_EPC_GOTO_DELAY 0x02000000 /* Delayed entry bit */ #define ATA_SF_EPC_GOTO_HOLD 0x01000000 /* Hold Power Cond bit */ /* * SET FEATURES command * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A) * Set Power Condition Timer subcommand * These values go in the LBA register. */ #define ATA_SF_EPC_TIMER_MASK 0x00ffff00 /* Timer field */ #define ATA_SF_EPC_TIMER_SHIFT 8 #define ATA_SF_EPC_TIMER_SEC 0x00000080 /* Timer units, 1=sec, 0=.1s */ #define ATA_SF_EPC_TIMER_EN 0x00000020 /* Enable/disable cond. */ #define ATA_SF_EPC_TIMER_SAVE 0x00000010 /* Save settings on comp. */ /* * SET FEATURES command * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A) * Set Power Condition State subcommand * These values go in the LBA register. */ #define ATA_SF_EPC_SETCON_EN 0x00000020 /* Enable power cond. */ #define ATA_SF_EPC_SETCON_SAVE 0x00000010 /* Save settings on comp */ /* * SET FEATURES command * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A) * Set EPC Power Source subcommand * These values go in the count register. */ #define ATA_SF_EPC_SRC_UNKNOWN 0x0000 /* Unknown source */ #define ATA_SF_EPC_SRC_BAT 0x0001 /* battery source */ #define ATA_SF_EPC_SRC_NOT_BAT 0x0002 /* not battery source */ #define ATA_LOG_DIRECTORY 0x00 /* Directory of all logs */ #define ATA_POWER_COND_LOG 0x08 /* Power Conditions Log */ #define ATA_PCL_IDLE 0x00 /* Idle Power Conditions Page */ #define ATA_PCL_STANDBY 0x01 /* Standby Power Conditions Page */ #define ATA_IDENTIFY_DATA_LOG 0x30 /* Identify Device Data Log */ #define ATA_IDL_PAGE_LIST 0x00 /* List of supported pages */ #define ATA_IDL_IDENTIFY_DATA 0x01 /* Copy of Identify Device data */ #define ATA_IDL_CAPACITY 0x02 /* Capacity */ #define ATA_IDL_SUP_CAP 0x03 /* Supported Capabilities */ #define ATA_IDL_CUR_SETTINGS 0x04 /* Current Settings */ #define ATA_IDL_ATA_STRINGS 0x05 /* ATA Strings */ #define ATA_IDL_SECURITY 0x06 /* Security */ #define ATA_IDL_PARALLEL_ATA 0x07 /* Parallel ATA */ #define ATA_IDL_SERIAL_ATA 0x08 /* Serial ATA */ #define ATA_IDL_ZDI 0x09 /* Zoned Device Information */ struct ata_gp_log_dir { uint8_t header[2]; #define ATA_GP_LOG_DIR_VERSION 0x0001 uint8_t num_pages[255*2]; /* Number of log pages at address */ }; /* * ATA Power Conditions log descriptor */ struct ata_power_cond_log_desc { uint8_t reserved1; uint8_t flags; #define ATA_PCL_COND_SUPPORTED 0x80 #define ATA_PCL_COND_SAVEABLE 0x40 #define ATA_PCL_COND_CHANGEABLE 0x20 #define ATA_PCL_DEFAULT_TIMER_EN 0x10 #define ATA_PCL_SAVED_TIMER_EN 0x08 #define ATA_PCL_CURRENT_TIMER_EN 0x04 #define ATA_PCL_HOLD_PC_NOT_SUP 0x02 uint8_t reserved2[2]; uint8_t default_timer[4]; uint8_t saved_timer[4]; uint8_t current_timer[4]; uint8_t nom_time_to_active[4]; uint8_t min_timer[4]; uint8_t max_timer[4]; uint8_t num_transitions_to_pc[4]; uint8_t hours_in_pc[4]; uint8_t reserved3[28]; }; /* * ATA Power Conditions Log (0x08), Idle power conditions page (0x00) */ struct ata_power_cond_log_idle { struct ata_power_cond_log_desc idle_a_desc; struct ata_power_cond_log_desc idle_b_desc; struct ata_power_cond_log_desc idle_c_desc; uint8_t reserved[320]; }; /* * ATA Power Conditions Log (0x08), Standby power conditions page (0x01) */ struct ata_power_cond_log_standby { uint8_t reserved[384]; struct ata_power_cond_log_desc standby_y_desc; struct ata_power_cond_log_desc standby_z_desc; }; /* * ATA IDENTIFY DEVICE data log (0x30) page 0x00 * List of Supported IDENTIFY DEVICE data pages. */ struct ata_identify_log_pages { uint8_t header[8]; #define ATA_IDLOG_REVISION 0x0000000000000001 uint8_t entry_count; uint8_t entries[503]; }; /* * ATA IDENTIFY DEVICE data log (0x30) * Capacity (Page 0x02). */ struct ata_identify_log_capacity { uint8_t header[8]; #define ATA_CAP_HEADER_VALID 0x8000000000000000 #define ATA_CAP_PAGE_NUM_MASK 0x0000000000ff0000 #define ATA_CAP_PAGE_NUM_SHIFT 16 #define ATA_CAP_REV_MASK 0x00000000000000ff uint8_t capacity[8]; #define ATA_CAP_CAPACITY_VALID 0x8000000000000000 #define ATA_CAP_ACCESSIBLE_CAP 0x0000ffffffffffff uint8_t phys_logical_sect_size[8]; #define ATA_CAP_PL_VALID 0x8000000000000000 #define ATA_CAP_LTOP_REL_SUP 0x4000000000000000 #define ATA_CAP_LOG_SECT_SUP 0x2000000000000000 #define ATA_CAP_ALIGN_ERR_MASK 0x0000000000300000 #define ATA_CAP_LTOP_MASK 0x00000000000f0000 #define ATA_CAP_LOG_SECT_OFF 0x000000000000ffff uint8_t logical_sect_size[8]; #define ATA_CAP_LOG_SECT_VALID 0x8000000000000000 #define ATA_CAP_LOG_SECT_SIZE 0x00000000ffffffff uint8_t nominal_buffer_size[8]; #define ATA_CAP_NOM_BUF_VALID 0x8000000000000000 #define ATA_CAP_NOM_BUF_SIZE 0x7fffffffffffffff uint8_t reserved[472]; }; /* * ATA IDENTIFY DEVICE data log (0x30) * Supported Capabilities (Page 0x03). */ struct ata_identify_log_sup_cap { uint8_t header[8]; #define ATA_SUP_CAP_HEADER_VALID 0x8000000000000000 #define ATA_SUP_CAP_PAGE_NUM_MASK 0x0000000000ff0000 #define ATA_SUP_CAP_PAGE_NUM_SHIFT 16 #define ATA_SUP_CAP_REV_MASK 0x00000000000000ff uint8_t sup_cap[8]; #define ATA_SUP_CAP_VALID 0x8000000000000000 #define ATA_SC_SET_SECT_CONFIG_SUP 0x0002000000000000 /* Set Sect Conf*/ #define ATA_SC_ZERO_EXT_SUP 0x0001000000000000 /* Zero EXT */ #define ATA_SC_SUCC_NCQ_SENSE_SUP 0x0000800000000000 /* Succ. NCQ Sns */ #define ATA_SC_DLC_SUP 0x0000400000000000 /* DLC */ #define ATA_SC_RQSN_DEV_FAULT_SUP 0x0000200000000000 /* Req Sns Dev Flt*/ #define ATA_SC_DSN_SUP 0x0000100000000000 /* DSN */ #define ATA_SC_LP_STANDBY_SUP 0x0000080000000000 /* LP Standby */ #define ATA_SC_SET_EPC_PS_SUP 0x0000040000000000 /* Set EPC PS */ #define ATA_SC_AMAX_ADDR_SUP 0x0000020000000000 /* AMAX Addr */ #define ATA_SC_DRAT_SUP 0x0000008000000000 /* DRAT */ #define ATA_SC_LPS_MISALGN_SUP 0x0000004000000000 /* LPS Misalign */ #define ATA_SC_RB_DMA_SUP 0x0000001000000000 /* Read Buf DMA */ #define ATA_SC_WB_DMA_SUP 0x0000000800000000 /* Write Buf DMA */ #define ATA_SC_DNLD_MC_DMA_SUP 0x0000000200000000 /* DL MCode DMA */ #define ATA_SC_28BIT_SUP 0x0000000100000000 /* 28-bit */ #define ATA_SC_RZAT_SUP 0x0000000080000000 /* RZAT */ #define ATA_SC_NOP_SUP 0x0000000020000000 /* NOP */ #define ATA_SC_READ_BUFFER_SUP 0x0000000010000000 /* Read Buffer */ #define ATA_SC_WRITE_BUFFER_SUP 0x0000000008000000 /* Write Buffer */ #define ATA_SC_READ_LOOK_AHEAD_SUP 0x0000000002000000 /* Read Look-Ahead*/ #define ATA_SC_VOLATILE_WC_SUP 0x0000000001000000 /* Volatile WC */ #define ATA_SC_SMART_SUP 0x0000000000800000 /* SMART */ #define ATA_SC_FLUSH_CACHE_EXT_SUP 0x0000000000400000 /* Flush Cache Ext */ #define ATA_SC_48BIT_SUP 0x0000000000100000 /* 48-Bit */ #define ATA_SC_SPINUP_SUP 0x0000000000040000 /* Spin-Up */ #define ATA_SC_PUIS_SUP 0x0000000000020000 /* PUIS */ #define ATA_SC_APM_SUP 0x0000000000010000 /* APM */ #define ATA_SC_DL_MICROCODE_SUP 0x0000000000004000 /* DL Microcode */ #define ATA_SC_UNLOAD_SUP 0x0000000000002000 /* Unload */ #define ATA_SC_WRITE_FUA_EXT_SUP 0x0000000000001000 /* Write FUA EXT */ #define ATA_SC_GPL_SUP 0x0000000000000800 /* GPL */ #define ATA_SC_STREAMING_SUP 0x0000000000000400 /* Streaming */ #define ATA_SC_SMART_SELFTEST_SUP 0x0000000000000100 /* SMART self-test */ #define ATA_SC_SMART_ERR_LOG_SUP 0x0000000000000080 /* SMART Err Log */ #define ATA_SC_EPC_SUP 0x0000000000000040 /* EPC */ #define ATA_SC_SENSE_SUP 0x0000000000000020 /* Sense data */ #define ATA_SC_FREEFALL_SUP 0x0000000000000010 /* Free-Fall */ #define ATA_SC_DM_MODE3_SUP 0x0000000000000008 /* DM Mode 3 */ #define ATA_SC_GPL_DMA_SUP 0x0000000000000004 /* GPL DMA */ #define ATA_SC_WRITE_UNCOR_SUP 0x0000000000000002 /* Write uncorr. */ #define ATA_SC_WRV_SUP 0x0000000000000001 /* WRV */ uint8_t download_code_cap[8]; #define ATA_DL_CODE_VALID 0x8000000000000000 #define ATA_DLC_DM_OFFSETS_DEFER_SUP 0x0000000400000000 #define ATA_DLC_DM_IMMED_SUP 0x0000000200000000 #define ATA_DLC_DM_OFF_IMMED_SUP 0x0000000100000000 #define ATA_DLC_DM_MAX_XFER_SIZE_MASK 0x00000000ffff0000 #define ATA_DLC_DM_MAX_XFER_SIZE_SHIFT 16 #define ATA_DLC_DM_MIN_XFER_SIZE_MASK 0x000000000000ffff uint8_t nom_media_rotation_rate[8]; #define ATA_NOM_MEDIA_ROTATION_VALID 0x8000000000000000 #define ATA_ROTATION_MASK 0x000000000000ffff uint8_t form_factor[8]; #define ATA_FORM_FACTOR_VALID 0x8000000000000000 #define ATA_FF_MASK 0x000000000000000f #define ATA_FF_NOT_REPORTED 0x0000000000000000 /* Not reported */ #define ATA_FF_525_IN 0x0000000000000001 /* 5.25 inch */ #define ATA_FF_35_IN 0x0000000000000002 /* 3.5 inch */ #define ATA_FF_25_IN 0x0000000000000003 /* 2.5 inch */ #define ATA_FF_18_IN 0x0000000000000004 /* 1.8 inch */ #define ATA_FF_LT_18_IN 0x0000000000000005 /* < 1.8 inch */ #define ATA_FF_MSATA 0x0000000000000006 /* mSATA */ #define ATA_FF_M2 0x0000000000000007 /* M.2 */ #define ATA_FF_MICROSSD 0x0000000000000008 /* MicroSSD */ #define ATA_FF_CFAST 0x0000000000000009 /* CFast */ uint8_t wrv_sec_cnt_mode3[8]; #define ATA_WRV_MODE3_VALID 0x8000000000000000 #define ATA_WRV_MODE3_COUNT 0x00000000ffffffff uint8_t wrv_sec_cnt_mode2[8]; #define ATA_WRV_MODE2_VALID 0x8000000000000000 #define ATA_WRV_MODE2_COUNT 0x00000000ffffffff uint8_t wwn[16]; /* XXX KDM need to figure out how to handle 128-bit fields */ uint8_t dsm[8]; #define ATA_DSM_VALID 0x8000000000000000 #define ATA_LB_MARKUP_SUP 0x000000000000ff00 #define ATA_TRIM_SUP 0x0000000000000001 uint8_t util_per_unit_time[16]; /* XXX KDM need to figure out how to handle 128-bit fields */ uint8_t util_usage_rate_sup[8]; #define ATA_UTIL_USAGE_RATE_VALID 0x8000000000000000 #define ATA_SETTING_RATE_SUP 0x0000000000800000 #define ATA_SINCE_POWERON_SUP 0x0000000000000100 #define ATA_POH_RATE_SUP 0x0000000000000010 #define ATA_DATE_TIME_RATE_SUP 0x0000000000000001 uint8_t zoned_cap[8]; #define ATA_ZONED_VALID 0x8000000000000000 #define ATA_ZONED_MASK 0x0000000000000003 uint8_t sup_zac_cap[8]; #define ATA_SUP_ZAC_CAP_VALID 0x8000000000000000 #define ATA_ND_RWP_SUP 0x0000000000000010 /* Reset Write Ptr*/ #define ATA_ND_FINISH_ZONE_SUP 0x0000000000000008 /* Finish Zone */ #define ATA_ND_CLOSE_ZONE_SUP 0x0000000000000004 /* Close Zone */ #define ATA_ND_OPEN_ZONE_SUP 0x0000000000000002 /* Open Zone */ #define ATA_REPORT_ZONES_SUP 0x0000000000000001 /* Report Zones */ uint8_t reserved[392]; }; /* * ATA Identify Device Data Log Zoned Device Information Page (0x09). * Current as of ZAC r04a, August 25, 2015. */ struct ata_zoned_info_log { uint8_t header[8]; #define ATA_ZDI_HEADER_VALID 0x8000000000000000 #define ATA_ZDI_PAGE_NUM_MASK 0x0000000000ff0000 #define ATA_ZDI_PAGE_NUM_SHIFT 16 #define ATA_ZDI_REV_MASK 0x00000000000000ff uint8_t zoned_cap[8]; #define ATA_ZDI_CAP_VALID 0x8000000000000000 #define ATA_ZDI_CAP_URSWRZ 0x0000000000000001 uint8_t zoned_settings[8]; #define ATA_ZDI_SETTINGS_VALID 0x8000000000000000 uint8_t optimal_seq_zones[8]; #define ATA_ZDI_OPT_SEQ_VALID 0x8000000000000000 #define ATA_ZDI_OPT_SEQ_MASK 0x00000000ffffffff uint8_t optimal_nonseq_zones[8]; #define ATA_ZDI_OPT_NS_VALID 0x8000000000000000 #define ATA_ZDI_OPT_NS_MASK 0x00000000ffffffff uint8_t max_seq_req_zones[8]; #define ATA_ZDI_MAX_SEQ_VALID 0x8000000000000000 #define ATA_ZDI_MAX_SEQ_MASK 0x00000000ffffffff uint8_t version_info[8]; #define ATA_ZDI_VER_VALID 0x8000000000000000 #define ATA_ZDI_VER_ZAC_SUP 0x0100000000000000 #define ATA_ZDI_VER_ZAC_MASK 0x00000000000000ff uint8_t reserved[456]; }; struct ata_ioc_request { union { struct { u_int8_t command; u_int8_t feature; u_int64_t lba; u_int16_t count; } ata; struct { char ccb[16]; struct atapi_sense sense; } atapi; } u; caddr_t data; int count; int flags; #define ATA_CMD_CONTROL 0x01 #define ATA_CMD_READ 0x02 #define ATA_CMD_WRITE 0x04 #define ATA_CMD_ATAPI 0x08 int timeout; int error; }; struct ata_security_password { u_int16_t ctrl; #define ATA_SECURITY_PASSWORD_USER 0x0000 #define ATA_SECURITY_PASSWORD_MASTER 0x0001 #define ATA_SECURITY_ERASE_NORMAL 0x0000 #define ATA_SECURITY_ERASE_ENHANCED 0x0002 #define ATA_SECURITY_LEVEL_HIGH 0x0000 #define ATA_SECURITY_LEVEL_MAXIMUM 0x0100 u_int8_t password[32]; u_int16_t revision; u_int16_t reserved[238]; }; /* pr device ATA ioctl calls */ #define IOCATAREQUEST _IOWR('a', 100, struct ata_ioc_request) #define IOCATAGPARM _IOR('a', 101, struct ata_params) #define IOCATAGMODE _IOR('a', 102, int) #define IOCATASMODE _IOW('a', 103, int) #define IOCATAGSPINDOWN _IOR('a', 104, int) #define IOCATASSPINDOWN _IOW('a', 105, int) struct ata_ioc_raid_config { int lun; int type; #define AR_JBOD 0x0001 #define AR_SPAN 0x0002 #define AR_RAID0 0x0004 #define AR_RAID1 0x0008 #define AR_RAID01 0x0010 #define AR_RAID3 0x0020 #define AR_RAID4 0x0040 #define AR_RAID5 0x0080 int interleave; int status; #define AR_READY 1 #define AR_DEGRADED 2 #define AR_REBUILDING 4 int progress; int total_disks; int disks[16]; }; struct ata_ioc_raid_status { int lun; int type; int interleave; int status; int progress; int total_disks; struct { int state; #define AR_DISK_ONLINE 0x01 #define AR_DISK_PRESENT 0x02 #define AR_DISK_SPARE 0x04 int lun; } disks[16]; }; /* ATA RAID ioctl calls */ #define IOCATARAIDCREATE _IOWR('a', 200, struct ata_ioc_raid_config) #define IOCATARAIDDELETE _IOW('a', 201, int) #define IOCATARAIDSTATUS _IOWR('a', 202, struct ata_ioc_raid_status) #define IOCATARAIDADDSPARE _IOW('a', 203, struct ata_ioc_raid_config) #define IOCATARAIDREBUILD _IOW('a', 204, int) #endif /* _SYS_ATA_H_ */