Index: head/sys/mips/conf/TL-WDR4300
===================================================================
--- head/sys/mips/conf/TL-WDR4300	(revision 321634)
+++ head/sys/mips/conf/TL-WDR4300	(revision 321635)
@@ -1,55 +1,54 @@
 #
 # TPLink TL-WDR4300 - AR9344 based dual-band 2x2 wifi
 #
 # $FreeBSD$
 #
 
 #NO_UNIVERSE
 
 # Include the default AR934x parameters
 include         "std.AR934X"
 
 ident           TL-WDR4300
 
 # Override hints with board values
 hints           "TL-WDR4300.hints"
 
 # Force the board memory - the base DB120 has 128MB RAM
 options         AR71XX_REALMEM=(128*1024*1024)
 
 # i2c GPIO bus
 #device		gpioiic
 #device		iicbb
 #device		iicbus
 #device		iic
 
 # Options required for miiproxy and mdiobus
 options 	ARGE_DEBUG
 options 	ARGE_MDIO	# Export an MDIO bus separate from arge
 device		miiproxy	# MDIO bus <-> MII PHY rendezvous
 
 device		etherswitch
 device		arswitch
 
 # read MSDOS formatted disks - USB
 options 	MSDOSFS
 
 # Enable the uboot environment stuff rather then the
 # redboot stuff.
 options 	AR71XX_ENV_UBOOT
 
 # uzip - to boot natively from flash
 device		geom_uzip
 options 	GEOM_UZIP
 
 # Used for the static uboot partition map
 device          geom_map
 
-# yes, this board has a PCI connected atheros device
-device		ath_pci
+# Yes, this board has a PCI connected atheros device
 options 	AR71XX_ATH_EEPROM
 device		firmware		# Used by the above
 options 	ATH_EEPROM_FIRMWARE
 
 # Boot off of the rootfs, as defined in the geom_map setup.
 options 	ROOTDEVNAME=\"ufs:map/rootfs.uzip\"