Index: head/sys/boot/forth/loader.conf =================================================================== --- head/sys/boot/forth/loader.conf (revision 315738) +++ head/sys/boot/forth/loader.conf (revision 315739) @@ -1,573 +1,572 @@ # This is loader.conf - a file full of useful variables that you can # set to change the default load behavior of your system. You should # not edit this file! Put any overrides into one of the # loader_conf_files instead and you will be able to update these # defaults later without spamming your local configuration information. # # All arguments must be in double quotes. # # $FreeBSD$ ############################################################## ### Basic configuration options ############################ ############################################################## exec="echo Loading /boot/defaults/loader.conf" kernel="kernel" # /boot sub-directory containing kernel and modules bootfile="kernel" # Kernel name (possibly absolute path) kernel_options="" # Flags to be passed to the kernel loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local" nextboot_conf="/boot/nextboot.conf" nextboot_enable="NO" verbose_loading="NO" # Set to YES for verbose loader output ############################################################## ### Splash screen configuration ############################ ############################################################## splash_bmp_load="NO" # Set this to YES for bmp splash screen! splash_pcx_load="NO" # Set this to YES for pcx splash screen! splash_txt_load="NO" # Set this to YES for TheDraw splash screen! vesa_load="NO" # Set this to YES to load the vesa module bitmap_load="NO" # Set this to YES if you want splash screen! bitmap_name="splash.bmp" # Set this to the name of the file bitmap_type="splash_image_data" # and place it on the module_path ############################################################## ### Random number generator configuration ################## ############################################################## # See rc.conf(5). The entropy_boot_file config variable must agree with the # settings below. entropy_cache_load="YES" # Set this to NO to disable loading # entropy at boot time entropy_cache_name="/boot/entropy" # Set this to the name of the file entropy_cache_type="/boot/entropy" # Required for the kernel to find # the boot-time entropy cache. This # must not change value even if the # _name above does change! ############################################################## ### RAM Blacklist configuration ############################ ############################################################## ram_blacklist_load="NO" # Set this to YES to load a file # containing a list of addresses to # exclude from the running system. ram_blacklist_name="/boot/blacklist.txt" # Set this to the name of the file ram_blacklist_type="ram_blacklist" # Required for the kernel to find # the blacklist module ############################################################## ### Initial memory disk settings ########################### ############################################################## #initmd_load="YES" # The "initmd" prefix is arbitrary. #initmd_type="md_image" # Create md(4) disk at boot. #initmd_name="/boot/root.img" # Path to a file containing the image. #rootdev="ufs:/dev/md0" # Set the root filesystem to md(4) device. ############################################################## ### Loader settings ######################################## ############################################################## #loader_delay="3" # Delay in seconds before loading anything. # Default is unset and disabled (no delay). #autoboot_delay="10" # Delay in seconds before autobooting, # set to -1 if you don't want user to be # allowed to interrupt autoboot process and # escape to the loader prompt, set to # "NO" to disable autobooting #password="" # Prevent changes to boot options #bootlock_password="" # Prevent booting (see check-password.4th(8)) #geom_eli_passphrase_prompt="NO" # Prompt for geli(8) passphrase to mount root bootenv_autolist="YES" # Auto populate the list of ZFS Boot Environments #beastie_disable="NO" # Turn the beastie boot menu on and off #kernels="kernel kernel.old" # Kernels to display in the boot menu #loader_logo="orbbw" # Desired logo: orbbw, orb, fbsdbw, beastiebw, beastie, none #comconsole_speed="9600" # Set the current serial console speed #console="vidconsole" # A comma separated list of console(s) #currdev="disk1s1a" # Set the current device module_path="/boot/modules" # Set the module search path #prompt="\\${interpret}" # Set the command prompt #root_disk_unit="0" # Force the root disk unit number #rootdev="disk1s1a" # Set the root filesystem #dumpdev="disk1s1b" # Set a dump device early in the boot process #tftp.blksize="1428" # Set the RFC 2348 TFTP block size. # If the TFTP server does not support RFC 2348, # the block size is set to 512. If the value # is out of range ( < 8 || > 9008 ) an error is # returned. #twiddle_divisor="1" # >1 means slow down the progress indicator. ############################################################## ### Kernel settings ######################################## ############################################################## # The following boot_ variables are enabled by setting them to any value. # Their presence in the kernel environment (see kenv(1)) has the same # effect as setting the given boot flag (see boot(8)). #boot_askname="" # -a: Prompt the user for the name of the root device #boot_cdrom="" # -C: Attempt to mount root file system from CD-ROM #boot_ddb="" # -d: Instructs the kernel to start in the DDB debugger #boot_dfltroot="" # -r: Use the statically configured root file system #boot_gdb="" # -g: Selects gdb-remote mode for the kernel debugger #boot_multicons="" # -D: Use multiple consoles #boot_mute="" # -m: Mute the console #boot_pause="" # -p: Pause after each line during device probing #boot_serial="" # -h: Use serial console #boot_single="" # -s: Start system in single-user mode #boot_verbose="" # -v: Causes extra debugging information to be printed #init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/rescue/init" # Sets the list of init candidates #init_shell="/bin/sh" # The shell binary used by init(8). #init_script="" # Initial script to run by init(8) before chrooting. #init_chroot="" # Directory for init(8) to chroot into. ############################################################## ### Kernel tunables ######################################## ############################################################## #hw.physmem="1G" # Limit physical memory. See loader(8) #kern.dfldsiz="" # Set the initial data size limit #kern.dflssiz="" # Set the initial stack size limit #kern.hz="100" # Set the kernel interval timer rate #kern.maxbcache="" # Set the max buffer cache KVA storage #kern.maxdsiz="" # Set the max data size #kern.maxfiles="" # Set the sys. wide open files limit #kern.maxproc="" # Set the maximum # of processes #kern.maxssiz="" # Set the max stack size #kern.maxswzone="" # Set the max swmeta KVA storage #kern.maxtsiz="" # Set the max text size #kern.maxusers="32" # Set size of various static tables #kern.msgbufsize="65536" # Set size of kernel message buffer #kern.nbuf="" # Set the number of buffer headers #kern.ncallout="" # Set the maximum # of timer events #kern.ngroups="1023" # Set the maximum # of supplemental groups #kern.sgrowsiz="" # Set the amount to grow stack #kern.cam.boot_delay="10000" # Delay (in ms) of root mount for CAM bus # registration, useful for USB sticks as root #kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI #kern.ipc.maxsockets="" # Set the maximum number of sockets available #kern.ipc.nmbclusters="" # Set the number of mbuf clusters #kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs #net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE #vfs.root.mountfrom="" # Specify root partition in a way the # kernel understands #vm.kmem_size="" # Sets the size of kernel memory (bytes) #debug.kdb.break_to_debugger="0" # Allow console to break into debugger. #debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on #debug.ktr.mask="0x1200" # Bitmask of KTR events to enable #debug.ktr.verbose="1" # Enable console dump of KTR events #net.graph.maxalloc="128" # Maximum number of queue items to allocate ############################################################## ### ATA modules ############################################ ############################################################## ataacard_load="NO" # ACARD ataacerlabs_load="NO" # Acer Labs Inc. (ALI) ataamd_load="NO" # American Micro Devices (AMD) ataati_load="NO" # ATI atacenatek_load="NO" # Cenatek atacypress_load="NO" # Cypress atacyrix_load="NO" # Cyrix atahighpoint_load="NO" # HighPoint ataintel_load="NO" # Intel ataite_load="NO" # Integrated Technology Inc. (ITE) atajmicron_load="NO" # JMicron atamarvell_load="NO" # Marvell atamicron_load="NO" # Micron atanational_load="NO" # National atanetcell_load="NO" # NetCell atanvidia_load="NO" # nVidia atapromise_load="NO" # Promise ataserverworks_load="NO" # ServerWorks atasiliconimage_load="NO" # Silicon Image Inc. (SiI) (formerly CMD) atasis_load="NO" # Silicon Integrated Systems Corp.(SiS) atavia_load="NO" # VIA Technologies Inc. ############################################################## ### Filesystem and related modules ######################### ############################################################## # Filesystems cd9660_load="NO" # ISO 9660 filesystem fdescfs_load="NO" # Filedescriptors filesystem linprocfs_load="NO" # Linux compatibility process filesystem linsysfs_load="NO" # Linux compatibility system filesystem msdosfs_load="NO" # FAT-12/16/32 nfsclient_load="NO" # NFS client nfsserver_load="NO" # NFS server nullfs_load="NO" # Null filesystem procfs_load="NO" # Process filesystem unionfs_load="NO" # Union filesystem zfs_load="NO" # ZFS # Related stuff geom_bde_load="NO" # Disk encryption driver (see gbde(4,8)) geom_ccd_load="NO" # Concatenated disk driver (see ccd(4), # ccdconfig(8)) geom_concat_load="NO" # Concatenated disk driver (see gconcat(8)) geom_eli_load="NO" # Disk encryption driver (see geli(8)) geom_gate_load="NO" # Userland disk driver (see geom_gate(4), # ggatec(8), ggated(8), ggatel(8)) geom_journal_load="NO" # Journaled filesystem driver (see gjournal(8)) geom_label_load="NO" # File system labels (see glabel(8)) geom_md_load="NO" # Memory disk driver (vnode/swap/malloc) (see # md(4), mdconfig(8)) geom_mirror_load="NO" # RAID1 disk driver (see gmirror(8)) geom_mountver_load="NO" # Mount verification disk driver geom_nop_load="NO" # Transparent disk driver (see gnop(8)) geom_raid3_load="NO" # RAID3 disk driver (see graid3(8)) geom_shsec_load="NO" # Shared secret disk driver (see gshsec(8)) geom_stripe_load="NO" # RAID0 disk driver (see gstripe(8)) geom_uzip_load="NO" # Compressed disk images driver (see mkuzip(8)) geom_vinum_load="NO" # Concatenated/mirror/raid driver (see vinum(4)) ############################################################## ### FireWire modules ####################################### ############################################################## firewire_load="NO" # IEEE1394 High-performance Serial Bus fwe_load="NO" # Ethernet emulation driver for FireWire fwip_load="NO" # IP over FireWire driver fwohci_load="NO" # OHCI FireWire chipset device driver sbp_load="NO" # SBP-2 Mass Storage Devices driver sbp_targ_load="NO" # SBP-2 Target mode ############################################################## ### Screen saver modules ################################### ############################################################## # This is best done in rc.conf screensave_load="NO" # Set to YES to load a screensaver module screensave_name="green_saver" # Set to the name of the screensaver module ############################################################## ### Emulation modules ###################################### ############################################################## cloudabi_load="NO" # Platform independent CloudABI support cloudabi64_load="NO" # 64-bit CloudABI executables support ibcs2_load="NO" # IBCS2 (SCO) emulation ibcs2_coff_load="NO" linux_load="NO" # Linux emulation ############################################################## ### Networking modules ##################################### ############################################################## if_disc_load="NO" # Discard device if_ef_load="NO" # pseudo-device providing support for multiple # ethernet frame types if_epair_load="NO" # Virtual b-t-b Ethernet-like interface pair if_gif_load="NO" # generic tunnel interface if_gre_load="NO" # encapsulating network device if_stf_load="NO" # 6to4 tunnel interface if_tap_load="NO" # Ethernet tunnel software network interface if_tun_load="NO" # Tunnel driver (user process ppp) if_vlan_load="NO" # IEEE 802.1Q VLAN network interface ipfw_load="NO" # Firewall pf_load="NO" # packet filter ############################################################## ### Networking drivers ##################################### ############################################################## bridgestp_load="NO" # if_bridge(4) support miibus_load="NO" # miibus support, needed for some drivers carp_load="NO" # carp(4) protocol if_ae_load="NO" # Attansic/Atheros L2 FastEthernet if_age_load="NO" # Attansic/Atheros L1 Gigabit Ethernet if_alc_load="NO" # Atheros AR8131/AR8132 Ethernet if_ale_load="NO" # Atheros AR8121/AR8113/AR8114 Ethernet if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs if_ath_load="NO" # Atheros IEEE 802.11 wireless NICs if_aue_load="NO" # ADMtek AN986 Pegasus USB Ethernet if_axe_load="NO" # ASIX Electronics AX88172 USB Ethernet if_bce_load="NO" # Broadcom NetXtreme II Gigabit Ethernet if_bfe_load="NO" # Broadcom BCM4401 if_bge_load="NO" # Broadcom BCM570x PCI Gigabit Ethernet if_bnxt_load="NO" # Broadcom NetXtreme-C/NetXtreme-E if_bridge_load="NO" # if_bridge(4) devices if_bwi_load="NO" # Broadcom BCM53xx IEEE 802.11b/g wireness NICs if_bwn_load="NO" # Broadcom BCM43xx IEEE 802.11 wireless NICs if_bxe_load="NO" # Broadcom NetXtreme II 10Gb Ethernet if_cas_load="NO" # Sun Cassini/Cassini+ and NS DP83065 Saturn if_cm_load="NO" # SMC (90c26, 90c56, 90c66) if_cs_load="NO" # Crystal Semiconductor CS8920 if_cue_load="NO" # CATC USB-EL1210A USB Ethernet if_cxgb_load="NO" # Chelsio T3 10 Gigabit Ethernet if_cxgbe_load="NO" # Chelsio T4/T5/T6 1/10/25/40/100 Gigabit Ethernet if_dc_load="NO" # DEC/Intel 21143 and various workalikes if_de_load="NO" # DEC DC21x4x Ethernet if_ed_load="NO" # National Semiconductor DS8390/WD83C690 # Ethernet if_em_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet if_en_load="NO" # Midway-based ATM interfaces if_ep_load="NO" # 3Com Etherlink III (3c5x9) if_et_load="NO" # Agere ET1310 10/100/Gigabit Ethernet if_ex_load="NO" # Intel EtherExpress Pro/10 Ethernet if_fatm_load="NO" # Fore PCA200E ATM if_fe_load="NO" # Fujitsu MB86960A/MB86965A based Ethernet # adapters if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558) if_gem_load="NO" # Sun GEM/Sun ERI/Apple GMAC if_hatm_load="NO" # Fore/Marconi HE155 and HE622 if_hme_load="NO" # Sun Microelectronics STP2002-STQ Ethernet if_ie_load="NO" # Intel 82586 -if_igb_load="NO" # Intel(R) PRO/1000 Gigabit Ethernet if_ipw_load="NO" # Intel PRO/Wireless 2100 wireless if_iwi_load="NO" # Intel PRO/Wireless 2200BG/2225BG/2915ABG # wireless if_iwn_load="NO" # Intel Wireless WiFi Link 802.11n wireless if_ixgb_load="NO" # Intel PRO/10Gb Ethernet if_ixgbe_load="NO" # Intel PRO/10Gb Ethernet PCI Express if_ixl_load="NO" # Intel XL710 Ethernet 40Gb Base driver if_ixlv_load="NO" # Intel XL710 Ethernet 40Gb VF driver if_jme_load="NO" # JMicron JMC250 Gigabit/JMC260 Fast Ethernet if_lagg_load="NO" # lagg(4) devices if_le_load="NO" # AMD Am7900 LANCE and Am79C9xx PCnet if_lge_load="NO" # Level 1 LXT1001 NetCellerator PCI Gigabit # Ethernet if_malo_load="NO" # Marvell Libertas 88W8335 802.11 wireless # adapter if_msk_load="NO" # Marvell/SysKonnect Yukon II Gigabit Ethernet if_mxge_load="NO" # Myricom Myri10GE 10Gb Ethernet if_my_load="NO" # Myson PCI Fast Ethernet if_nfe_load="NO" # NVIDIA nForce MCP Networking Adapter if_nge_load="NO" # National Semiconductor PCI Gigabit Ethernet if_nxge_load="NO" # Neterion Xframe 10Gb Ethernet if_patm_load="NO" # IDT77252 ATM if_pcn_load="NO" # AMD PCnet PCI if_ral_load="NO" # Ralink Technology wireless if_re_load="NO" # RealTek 8139C+/8169/8169S/8110S if_rl_load="NO" # RealTek 8129/8139 if_rue_load="NO" # RealTek RTL8150 USB to Fast Ethernet if_rum_load="NO" # Ralink Technology USB 802.11a/b/g wireless if_run_load="NO" # Ralink Technology USB 802.11a/g/n wireless if_sbni_load="NO" # Granch SBNI12 leased line adapters if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire") if_sge_load="NO" # Silicon Integrated Systems SiS 190/191 if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016 if_sk_load="NO" # SysKonnect SK-984x series PCI Gigabit Ethernet if_sn_load="NO" # SMC 91Cxx if_ste_load="NO" # Sundance Technologies ST201 Fast Ethernet if_stge_load="NO" # Sundance/Tamarack TC9021 Gigabit Ethernet if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2 if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN") if_tx_load="NO" # SMC 83c17x Fast Ethernet if_txp_load="NO" # 3Com 3XP Typhoon/Sidewinder (3CR990) if_vge_load="NO" # VIA VT6122 PCI Gigabit Ethernet if_vte_load="NO" # DM&P Vortex86 RDC R6040 Fast Ethernet if_uath_load="NO" # Atheros USB wireless for AR5005UG & AR5005UX if_udav_load="NO" # Davicom DM9601 USB Ethernet if_upgt_load="NO" # Conexant/Intersil PrismGT USB wireless if_ural_load="NO" # Ralink Technology USB wireless if_urtw_load="NO" # Realtek 8187L USB wireless if_vr_load="NO" # VIA Rhine I and Rhine II if_vx_load="NO" # 3Com 3C590 family if_wb_load="NO" # Winbond W89C840F if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs if_wpi_load="NO" # Intel 3945ABG Wireless LAN IEEE 802.11 if_xe_load="NO" # Xircom CreditCard PCMCIA if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B) sfxge_load="NO" # Solarflare 10Gb Ethernet adapter driver utopia_load="NO" # ATM PHY driver ############################################################## ### Netgraph modules ####################################### ############################################################## ng_UI_load="NO" # UI netgraph node type ng_async_load="NO" # asynchronous framing netgraph node type ng_bpf_load="NO" # Berkeley packet filter netgraph node type ng_bridge_load="NO" # Ethernet bridging netgraph node type ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type ng_echo_load="NO" # Netgraph echo node type ng_eiface_load="NO" # generic Ethernet interface netgraph node type ng_etf_load="NO" # Ethertype filtering netgraph node type ng_ether_load="NO" # Ethernet netgraph node type ng_frame_relay_load="NO" # frame relay netgraph node type ng_gif_load="NO" # generic tunnel interface netgraph node type ng_gif_demux_load="NO" # demultiplexer for packets from ng_gif(4) nodes ng_hole_load="NO" # Netgraph discard node type ng_hub_load="NO" # packet distribution netgraph node type ng_iface_load="NO" # interface Netgraph node type ng_ip_input_load="NO" # netgraph IP input node type ng_ksocket_load="NO" # kernel socket netgraph node type ng_l2tp_load="NO" # L2TP protocol netgraph node type ng_lmi_load="NO" # frame relay LMI protocol netgraph node type ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and # encryption netgraph node type ng_netflow_load="NO" # Cisco's NetFlow netgraph node type ng_one2many_load="NO" # packet multiplexing netgraph node type ng_ppp_load="NO" # PPP protocol netgraph node type ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type ng_rfc1490_load="NO" # RFC 1490 netgraph node type ng_socket_load="NO" # Netgraph socket node type ng_split_load="NO" # netgraph node to separate incoming and # outgoing flows ng_sppp_load="NO" # sppp netgraph node type ng_tee_load="NO" # Netgraph ``tee'' node type ng_tty_load="NO" # Netgraph node type that is also a line # discipline ng_vjc_load="NO" # Van Jacobsen compression netgraph node type ng_vlan_load="NO" # IEEE 802.1Q VLAN tagging netgraph node type ############################################################## ### Sound modules ########################################## ############################################################## sound_load="NO" # Digital sound subsystem snd_ad1816_load="NO" # ad1816 snd_als4000_load="NO" # als4000 snd_atiixp_load="NO" # atiixp snd_cmi_load="NO" # cmi snd_cs4281_load="NO" # cs4281 snd_csa_load="NO" # csa snd_ds1_load="NO" # ds1 snd_emu10k1_load="NO" # Creative Sound Blaster Live snd_emu10kx_load="NO" # Creative SoundBlaster Live! and Audigy snd_envy24_load="NO" # VIA Envy24 snd_envy24ht_load="NO" # VIA Envy24HT snd_es137x_load="NO" # es137x snd_ess_load="NO" # ess snd_fm801_load="NO" # fm801 snd_hda_load="NO" # Intel High Definition Audio (Controller) snd_ich_load="NO" # Intel ICH snd_maestro_load="NO" # Maestro snd_maestro3_load="NO" # Maestro3 snd_mss_load="NO" # Mss snd_neomagic_load="NO" # Neomagic snd_sb16_load="NO" # Sound Blaster 16 snd_sb8_load="NO" # Sound Blaster Pro snd_sbc_load="NO" # Sbc snd_solo_load="NO" # Solo snd_spicds_load="NO" # SPI codecs snd_t4dwave_load="NO" # t4dwave snd_via8233_load="NO" # via8233 snd_via82c686_load="NO" # via82c686 snd_vibes_load="NO" # vibes snd_driver_load="NO" # All sound drivers ############################################################## ### USB modules ############################################ ############################################################## usb_load="NO" # USB subsystem udbp_load="NO" # USB double bulk pipe host 2 host cables ugen_load="NO" # USB generic device, if all else fails ... ucycom_load="NO" # Cyprus USB serial adapters ufm_load="NO" # Fm Radio uhid_load="NO" # Human Interface Devices ukbd_load="NO" # Keyboard ulpt_load="NO" # Printer ums_load="NO" # Mouse umass_load="NO" # Mass Storage Devices umct_load="NO" # Magic Control Technology USB-RS232 umodem_load="NO" # Modems uplcom_load="NO" # Prolific USB serial adapters urio_load="NO" # Rio MP3 players uvisor_load="NO" # PalmOS based PDAs if_aue_load="NO" # ADMtek USB ethernet if_axe_load="NO" # ASIX Electronics AX88172 USB ethernet if_cdce_load="NO" # Ethernet over USB (CDC) if_cue_load="NO" # CATC USB ethernet if_kue_load="NO" # Kawasaki LSI USB ethernet if_rae_load="NO" # Realtek RTL8150 USB adapter. if_rum_load="NO" # Ralink USB 802.11 wireless adapter if_uath_load="NO" # Atheros AR5523 wireless adapter if_run_load="NO" # Ralink USB 802.11 wireless adapter if_ural_load="NO" # Ralink RT2500USB 802.11 wireless adapter if_zyd_load="NO" # ZyDAS ZD1211(B) USB 802.11 wireless adapter snd_uaudio_load="NO" # USB audio ############################################################## ### Other modules ########################################## ############################################################## aio_load="NO" # Asynchronous I/O bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card ispfw_load="NO" # Qlogic ISP Firmware agp_load="NO" # agp module accf_data_load="NO" # Wait for data accept filter accf_dns_load="NO" # Wait for full DNS request accept filter accf_http_load="NO" # Wait for full HTTP request accept filter ppi_load="NO" # Interface to ppbus parallel 'geek' port pps_load="NO" # Pulse per second devices puc_load="NO" # PCI "Universal" Communications driver random_load="NO" # Random device speaker_load="NO" # AT speaker module coretemp_load="NO" # Intel Core CPU temperature monitor vkbd_load="NO" # Virtual AT keyboard interface vpd_load="NO" # Vital Product Data kernel interface vpo_load="NO" # Parallel to SCSI interface driver amdtemp_load="NO" # AMD K8/K10/K11 temperature monitor tpm_load="NO" # Trusted Platform Module wbwd_load="NO" # Winbond watchdog ############################################################## ### ACPI settings ########################################## ############################################################## acpi_dsdt_load="NO" # DSDT Overriding acpi_dsdt_type="acpi_dsdt" # Don't change this acpi_dsdt_name="/boot/acpi_dsdt.aml" # Override DSDT in BIOS by this file acpi_video_load="NO" # Load the ACPI video extension driver ############################################################## ### TrustedBSD MAC settings ################################ ############################################################## mac_biba_load="NO" # Biba MAC policy mac_bsdextended_load="NO" # BSD/extended MAC policy mac_ifoff="NO" # Interface silencing policy mac_mls_load="NO" # MLS MAC policy mac_none_load="NO" # Null MAC policy mac_partition_load="NO" # Partition MAC policy mac_seeotheruids_load="NO" # UID visbility MAC policy ############################################################## ### Module loading syntax example ########################## ############################################################## #module_load="YES" # loads module "module" #module_name="realname" # uses "realname" instead of "module" #module_type="type" # passes "-t type" to load #module_flags="flags" # passes "flags" to the module #module_before="cmd" # executes "cmd" before loading the module #module_after="cmd" # executes "cmd" after loading the module #module_error="cmd" # executes "cmd" if load fails