Index: stable/11/sys/dev/iwi/if_iwi.c =================================================================== --- stable/11/sys/dev/iwi/if_iwi.c (revision 314221) +++ stable/11/sys/dev/iwi/if_iwi.c (revision 314222) @@ -1,3616 +1,3616 @@ /*- * Copyright (c) 2004, 2005 * Damien Bergamini . All rights reserved. * Copyright (c) 2005-2006 Sam Leffler, Errno Consulting * Copyright (c) 2007 Andrew Thompson * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /*- * Intel(R) PRO/Wireless 2200BG/2225BG/2915ABG driver * http://www.intel.com/network/connectivity/products/wireless/prowireless_mobile.htm */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define IWI_DEBUG #ifdef IWI_DEBUG #define DPRINTF(x) do { if (iwi_debug > 0) printf x; } while (0) #define DPRINTFN(n, x) do { if (iwi_debug >= (n)) printf x; } while (0) int iwi_debug = 0; SYSCTL_INT(_debug, OID_AUTO, iwi, CTLFLAG_RW, &iwi_debug, 0, "iwi debug level"); static const char *iwi_fw_states[] = { "IDLE", /* IWI_FW_IDLE */ "LOADING", /* IWI_FW_LOADING */ "ASSOCIATING", /* IWI_FW_ASSOCIATING */ "DISASSOCIATING", /* IWI_FW_DISASSOCIATING */ "SCANNING", /* IWI_FW_SCANNING */ }; #else #define DPRINTF(x) #define DPRINTFN(n, x) #endif MODULE_DEPEND(iwi, pci, 1, 1, 1); MODULE_DEPEND(iwi, wlan, 1, 1, 1); MODULE_DEPEND(iwi, firmware, 1, 1, 1); enum { IWI_LED_TX, IWI_LED_RX, IWI_LED_POLL, }; struct iwi_ident { uint16_t vendor; uint16_t device; const char *name; }; static const struct iwi_ident iwi_ident_table[] = { { 0x8086, 0x4220, "Intel(R) PRO/Wireless 2200BG" }, { 0x8086, 0x4221, "Intel(R) PRO/Wireless 2225BG" }, { 0x8086, 0x4223, "Intel(R) PRO/Wireless 2915ABG" }, { 0x8086, 0x4224, "Intel(R) PRO/Wireless 2915ABG" }, { 0, 0, NULL } }; static const uint8_t def_chan_2ghz[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 }; static const uint8_t def_chan_5ghz_band1[] = { 36, 40, 44, 48, 52, 56, 60, 64 }; static const uint8_t def_chan_5ghz_band2[] = { 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 }; static const uint8_t def_chan_5ghz_band3[] = { 149, 153, 157, 161, 165 }; static struct ieee80211vap *iwi_vap_create(struct ieee80211com *, const char [IFNAMSIZ], int, enum ieee80211_opmode, int, const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN]); static void iwi_vap_delete(struct ieee80211vap *); static void iwi_dma_map_addr(void *, bus_dma_segment_t *, int, int); static int iwi_alloc_cmd_ring(struct iwi_softc *, struct iwi_cmd_ring *, int); static void iwi_reset_cmd_ring(struct iwi_softc *, struct iwi_cmd_ring *); static void iwi_free_cmd_ring(struct iwi_softc *, struct iwi_cmd_ring *); static int iwi_alloc_tx_ring(struct iwi_softc *, struct iwi_tx_ring *, int, bus_addr_t, bus_addr_t); static void iwi_reset_tx_ring(struct iwi_softc *, struct iwi_tx_ring *); static void iwi_free_tx_ring(struct iwi_softc *, struct iwi_tx_ring *); static int iwi_alloc_rx_ring(struct iwi_softc *, struct iwi_rx_ring *, int); static void iwi_reset_rx_ring(struct iwi_softc *, struct iwi_rx_ring *); static void iwi_free_rx_ring(struct iwi_softc *, struct iwi_rx_ring *); static struct ieee80211_node *iwi_node_alloc(struct ieee80211vap *, const uint8_t [IEEE80211_ADDR_LEN]); static void iwi_node_free(struct ieee80211_node *); static void iwi_media_status(struct ifnet *, struct ifmediareq *); static int iwi_newstate(struct ieee80211vap *, enum ieee80211_state, int); static void iwi_wme_init(struct iwi_softc *); static int iwi_wme_setparams(struct iwi_softc *); static int iwi_wme_update(struct ieee80211com *); static uint16_t iwi_read_prom_word(struct iwi_softc *, uint8_t); static void iwi_frame_intr(struct iwi_softc *, struct iwi_rx_data *, int, struct iwi_frame *); static void iwi_notification_intr(struct iwi_softc *, struct iwi_notif *); static void iwi_rx_intr(struct iwi_softc *); static void iwi_tx_intr(struct iwi_softc *, struct iwi_tx_ring *); static void iwi_intr(void *); static int iwi_cmd(struct iwi_softc *, uint8_t, void *, uint8_t); static void iwi_write_ibssnode(struct iwi_softc *, const u_int8_t [], int); static int iwi_tx_start(struct iwi_softc *, struct mbuf *, struct ieee80211_node *, int); static int iwi_raw_xmit(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); static void iwi_start(struct iwi_softc *); static int iwi_transmit(struct ieee80211com *, struct mbuf *); static void iwi_watchdog(void *); static int iwi_ioctl(struct ieee80211com *, u_long, void *); static void iwi_parent(struct ieee80211com *); static void iwi_stop_master(struct iwi_softc *); static int iwi_reset(struct iwi_softc *); static int iwi_load_ucode(struct iwi_softc *, const struct iwi_fw *); static int iwi_load_firmware(struct iwi_softc *, const struct iwi_fw *); static void iwi_release_fw_dma(struct iwi_softc *sc); static int iwi_config(struct iwi_softc *); static int iwi_get_firmware(struct iwi_softc *, enum ieee80211_opmode); static void iwi_put_firmware(struct iwi_softc *); static void iwi_monitor_scan(void *, int); static int iwi_scanchan(struct iwi_softc *, unsigned long, int); static void iwi_scan_start(struct ieee80211com *); static void iwi_scan_end(struct ieee80211com *); static void iwi_set_channel(struct ieee80211com *); static void iwi_scan_curchan(struct ieee80211_scan_state *, unsigned long maxdwell); static void iwi_scan_mindwell(struct ieee80211_scan_state *); static int iwi_auth_and_assoc(struct iwi_softc *, struct ieee80211vap *); static void iwi_disassoc(void *, int); static int iwi_disassociate(struct iwi_softc *, int quiet); static void iwi_init_locked(struct iwi_softc *); static void iwi_init(void *); static int iwi_init_fw_dma(struct iwi_softc *, int); static void iwi_stop_locked(void *); static void iwi_stop(struct iwi_softc *); static void iwi_restart(void *, int); static int iwi_getrfkill(struct iwi_softc *); static void iwi_radio_on(void *, int); static void iwi_radio_off(void *, int); static void iwi_sysctlattach(struct iwi_softc *); static void iwi_led_event(struct iwi_softc *, int); static void iwi_ledattach(struct iwi_softc *); static void iwi_collect_bands(struct ieee80211com *, uint8_t [], size_t); static void iwi_getradiocaps(struct ieee80211com *, int, int *, struct ieee80211_channel []); static int iwi_probe(device_t); static int iwi_attach(device_t); static int iwi_detach(device_t); static int iwi_shutdown(device_t); static int iwi_suspend(device_t); static int iwi_resume(device_t); static device_method_t iwi_methods[] = { /* Device interface */ DEVMETHOD(device_probe, iwi_probe), DEVMETHOD(device_attach, iwi_attach), DEVMETHOD(device_detach, iwi_detach), DEVMETHOD(device_shutdown, iwi_shutdown), DEVMETHOD(device_suspend, iwi_suspend), DEVMETHOD(device_resume, iwi_resume), DEVMETHOD_END }; static driver_t iwi_driver = { "iwi", iwi_methods, sizeof (struct iwi_softc) }; static devclass_t iwi_devclass; DRIVER_MODULE(iwi, pci, iwi_driver, iwi_devclass, NULL, NULL); MODULE_VERSION(iwi, 1); static __inline uint8_t MEM_READ_1(struct iwi_softc *sc, uint32_t addr) { CSR_WRITE_4(sc, IWI_CSR_INDIRECT_ADDR, addr); return CSR_READ_1(sc, IWI_CSR_INDIRECT_DATA); } static __inline uint32_t MEM_READ_4(struct iwi_softc *sc, uint32_t addr) { CSR_WRITE_4(sc, IWI_CSR_INDIRECT_ADDR, addr); return CSR_READ_4(sc, IWI_CSR_INDIRECT_DATA); } static int iwi_probe(device_t dev) { const struct iwi_ident *ident; for (ident = iwi_ident_table; ident->name != NULL; ident++) { if (pci_get_vendor(dev) == ident->vendor && pci_get_device(dev) == ident->device) { device_set_desc(dev, ident->name); return (BUS_PROBE_DEFAULT); } } return ENXIO; } static int iwi_attach(device_t dev) { struct iwi_softc *sc = device_get_softc(dev); struct ieee80211com *ic = &sc->sc_ic; uint16_t val; int i, error; sc->sc_dev = dev; IWI_LOCK_INIT(sc); mbufq_init(&sc->sc_snd, ifqmaxlen); sc->sc_unr = new_unrhdr(1, IWI_MAX_IBSSNODE-1, &sc->sc_mtx); TASK_INIT(&sc->sc_radiontask, 0, iwi_radio_on, sc); TASK_INIT(&sc->sc_radiofftask, 0, iwi_radio_off, sc); TASK_INIT(&sc->sc_restarttask, 0, iwi_restart, sc); TASK_INIT(&sc->sc_disassoctask, 0, iwi_disassoc, sc); TASK_INIT(&sc->sc_monitortask, 0, iwi_monitor_scan, sc); callout_init_mtx(&sc->sc_wdtimer, &sc->sc_mtx, 0); callout_init_mtx(&sc->sc_rftimer, &sc->sc_mtx, 0); pci_write_config(dev, 0x41, 0, 1); /* enable bus-mastering */ pci_enable_busmaster(dev); i = PCIR_BAR(0); sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &i, RF_ACTIVE); if (sc->mem == NULL) { device_printf(dev, "could not allocate memory resource\n"); goto fail; } sc->sc_st = rman_get_bustag(sc->mem); sc->sc_sh = rman_get_bushandle(sc->mem); i = 0; sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i, RF_ACTIVE | RF_SHAREABLE); if (sc->irq == NULL) { device_printf(dev, "could not allocate interrupt resource\n"); goto fail; } if (iwi_reset(sc) != 0) { device_printf(dev, "could not reset adapter\n"); goto fail; } /* * Allocate rings. */ if (iwi_alloc_cmd_ring(sc, &sc->cmdq, IWI_CMD_RING_COUNT) != 0) { device_printf(dev, "could not allocate Cmd ring\n"); goto fail; } for (i = 0; i < 4; i++) { error = iwi_alloc_tx_ring(sc, &sc->txq[i], IWI_TX_RING_COUNT, IWI_CSR_TX1_RIDX + i * 4, IWI_CSR_TX1_WIDX + i * 4); if (error != 0) { device_printf(dev, "could not allocate Tx ring %d\n", i+i); goto fail; } } if (iwi_alloc_rx_ring(sc, &sc->rxq, IWI_RX_RING_COUNT) != 0) { device_printf(dev, "could not allocate Rx ring\n"); goto fail; } iwi_wme_init(sc); ic->ic_softc = sc; ic->ic_name = device_get_nameunit(dev); ic->ic_opmode = IEEE80211_M_STA; ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ /* set device capabilities */ ic->ic_caps = IEEE80211_C_STA /* station mode supported */ | IEEE80211_C_IBSS /* IBSS mode supported */ | IEEE80211_C_MONITOR /* monitor mode supported */ | IEEE80211_C_PMGT /* power save supported */ | IEEE80211_C_SHPREAMBLE /* short preamble supported */ | IEEE80211_C_WPA /* 802.11i */ | IEEE80211_C_WME /* 802.11e */ #if 0 | IEEE80211_C_BGSCAN /* capable of bg scanning */ #endif ; /* read MAC address from EEPROM */ val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 0); ic->ic_macaddr[0] = val & 0xff; ic->ic_macaddr[1] = val >> 8; val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 1); ic->ic_macaddr[2] = val & 0xff; ic->ic_macaddr[3] = val >> 8; val = iwi_read_prom_word(sc, IWI_EEPROM_MAC + 2); ic->ic_macaddr[4] = val & 0xff; ic->ic_macaddr[5] = val >> 8; iwi_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans, ic->ic_channels); ieee80211_ifattach(ic); /* override default methods */ ic->ic_node_alloc = iwi_node_alloc; sc->sc_node_free = ic->ic_node_free; ic->ic_node_free = iwi_node_free; ic->ic_raw_xmit = iwi_raw_xmit; ic->ic_scan_start = iwi_scan_start; ic->ic_scan_end = iwi_scan_end; ic->ic_set_channel = iwi_set_channel; ic->ic_scan_curchan = iwi_scan_curchan; ic->ic_scan_mindwell = iwi_scan_mindwell; ic->ic_wme.wme_update = iwi_wme_update; ic->ic_vap_create = iwi_vap_create; ic->ic_vap_delete = iwi_vap_delete; ic->ic_ioctl = iwi_ioctl; ic->ic_transmit = iwi_transmit; ic->ic_parent = iwi_parent; ic->ic_getradiocaps = iwi_getradiocaps; ieee80211_radiotap_attach(ic, &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), IWI_TX_RADIOTAP_PRESENT, &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), IWI_RX_RADIOTAP_PRESENT); iwi_sysctlattach(sc); iwi_ledattach(sc); /* * Hook our interrupt after all initialization is complete. */ error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET | INTR_MPSAFE, NULL, iwi_intr, sc, &sc->sc_ih); if (error != 0) { device_printf(dev, "could not set up interrupt\n"); goto fail; } if (bootverbose) ieee80211_announce(ic); return 0; fail: /* XXX fix */ iwi_detach(dev); return ENXIO; } static int iwi_detach(device_t dev) { struct iwi_softc *sc = device_get_softc(dev); struct ieee80211com *ic = &sc->sc_ic; bus_teardown_intr(dev, sc->irq, sc->sc_ih); /* NB: do early to drain any pending tasks */ ieee80211_draintask(ic, &sc->sc_radiontask); ieee80211_draintask(ic, &sc->sc_radiofftask); ieee80211_draintask(ic, &sc->sc_restarttask); ieee80211_draintask(ic, &sc->sc_disassoctask); ieee80211_draintask(ic, &sc->sc_monitortask); iwi_stop(sc); ieee80211_ifdetach(ic); iwi_put_firmware(sc); iwi_release_fw_dma(sc); iwi_free_cmd_ring(sc, &sc->cmdq); iwi_free_tx_ring(sc, &sc->txq[0]); iwi_free_tx_ring(sc, &sc->txq[1]); iwi_free_tx_ring(sc, &sc->txq[2]); iwi_free_tx_ring(sc, &sc->txq[3]); iwi_free_rx_ring(sc, &sc->rxq); bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq), sc->irq); bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(sc->mem), sc->mem); delete_unrhdr(sc->sc_unr); mbufq_drain(&sc->sc_snd); IWI_LOCK_DESTROY(sc); return 0; } static struct ieee80211vap * iwi_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, enum ieee80211_opmode opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t mac[IEEE80211_ADDR_LEN]) { struct iwi_softc *sc = ic->ic_softc; struct iwi_vap *ivp; struct ieee80211vap *vap; int i; if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */ return NULL; /* * Get firmware image (and possibly dma memory) on mode change. */ if (iwi_get_firmware(sc, opmode)) return NULL; /* allocate DMA memory for mapping firmware image */ i = sc->fw_fw.size; if (sc->fw_boot.size > i) i = sc->fw_boot.size; /* XXX do we dma the ucode as well ? */ if (sc->fw_uc.size > i) i = sc->fw_uc.size; if (iwi_init_fw_dma(sc, i)) return NULL; ivp = malloc(sizeof(struct iwi_vap), M_80211_VAP, M_WAITOK | M_ZERO); vap = &ivp->iwi_vap; ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid); /* override the default, the setting comes from the linux driver */ vap->iv_bmissthreshold = 24; /* override with driver methods */ ivp->iwi_newstate = vap->iv_newstate; vap->iv_newstate = iwi_newstate; /* complete setup */ ieee80211_vap_attach(vap, ieee80211_media_change, iwi_media_status, mac); ic->ic_opmode = opmode; return vap; } static void iwi_vap_delete(struct ieee80211vap *vap) { struct iwi_vap *ivp = IWI_VAP(vap); ieee80211_vap_detach(vap); free(ivp, M_80211_VAP); } static void iwi_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) { if (error != 0) return; KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); *(bus_addr_t *)arg = segs[0].ds_addr; } static int iwi_alloc_cmd_ring(struct iwi_softc *sc, struct iwi_cmd_ring *ring, int count) { int error; ring->count = count; ring->queued = 0; ring->cur = ring->next = 0; error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, count * IWI_CMD_DESC_SIZE, 1, count * IWI_CMD_DESC_SIZE, 0, NULL, NULL, &ring->desc_dmat); if (error != 0) { device_printf(sc->sc_dev, "could not create desc DMA tag\n"); goto fail; } error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); if (error != 0) { device_printf(sc->sc_dev, "could not allocate DMA memory\n"); goto fail; } error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, count * IWI_CMD_DESC_SIZE, iwi_dma_map_addr, &ring->physaddr, 0); if (error != 0) { device_printf(sc->sc_dev, "could not load desc DMA map\n"); goto fail; } return 0; fail: iwi_free_cmd_ring(sc, ring); return error; } static void iwi_reset_cmd_ring(struct iwi_softc *sc, struct iwi_cmd_ring *ring) { ring->queued = 0; ring->cur = ring->next = 0; } static void iwi_free_cmd_ring(struct iwi_softc *sc, struct iwi_cmd_ring *ring) { if (ring->desc != NULL) { bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->desc_dmat, ring->desc_map); bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); } if (ring->desc_dmat != NULL) bus_dma_tag_destroy(ring->desc_dmat); } static int iwi_alloc_tx_ring(struct iwi_softc *sc, struct iwi_tx_ring *ring, int count, bus_addr_t csr_ridx, bus_addr_t csr_widx) { int i, error; ring->count = count; ring->queued = 0; ring->cur = ring->next = 0; ring->csr_ridx = csr_ridx; ring->csr_widx = csr_widx; error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, count * IWI_TX_DESC_SIZE, 1, count * IWI_TX_DESC_SIZE, 0, NULL, NULL, &ring->desc_dmat); if (error != 0) { device_printf(sc->sc_dev, "could not create desc DMA tag\n"); goto fail; } error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); if (error != 0) { device_printf(sc->sc_dev, "could not allocate DMA memory\n"); goto fail; } error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, count * IWI_TX_DESC_SIZE, iwi_dma_map_addr, &ring->physaddr, 0); if (error != 0) { device_printf(sc->sc_dev, "could not load desc DMA map\n"); goto fail; } ring->data = malloc(count * sizeof (struct iwi_tx_data), M_DEVBUF, M_NOWAIT | M_ZERO); if (ring->data == NULL) { device_printf(sc->sc_dev, "could not allocate soft data\n"); error = ENOMEM; goto fail; } error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, IWI_MAX_NSEG, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); if (error != 0) { device_printf(sc->sc_dev, "could not create data DMA tag\n"); goto fail; } for (i = 0; i < count; i++) { error = bus_dmamap_create(ring->data_dmat, 0, &ring->data[i].map); if (error != 0) { device_printf(sc->sc_dev, "could not create DMA map\n"); goto fail; } } return 0; fail: iwi_free_tx_ring(sc, ring); return error; } static void iwi_reset_tx_ring(struct iwi_softc *sc, struct iwi_tx_ring *ring) { struct iwi_tx_data *data; int i; for (i = 0; i < ring->count; i++) { data = &ring->data[i]; if (data->m != NULL) { bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->data_dmat, data->map); m_freem(data->m); data->m = NULL; } if (data->ni != NULL) { ieee80211_free_node(data->ni); data->ni = NULL; } } ring->queued = 0; ring->cur = ring->next = 0; } static void iwi_free_tx_ring(struct iwi_softc *sc, struct iwi_tx_ring *ring) { struct iwi_tx_data *data; int i; if (ring->desc != NULL) { bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->desc_dmat, ring->desc_map); bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); } if (ring->desc_dmat != NULL) bus_dma_tag_destroy(ring->desc_dmat); if (ring->data != NULL) { for (i = 0; i < ring->count; i++) { data = &ring->data[i]; if (data->m != NULL) { bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->data_dmat, data->map); m_freem(data->m); } if (data->ni != NULL) ieee80211_free_node(data->ni); if (data->map != NULL) bus_dmamap_destroy(ring->data_dmat, data->map); } free(ring->data, M_DEVBUF); } if (ring->data_dmat != NULL) bus_dma_tag_destroy(ring->data_dmat); } static int iwi_alloc_rx_ring(struct iwi_softc *sc, struct iwi_rx_ring *ring, int count) { struct iwi_rx_data *data; int i, error; ring->count = count; ring->cur = 0; ring->data = malloc(count * sizeof (struct iwi_rx_data), M_DEVBUF, M_NOWAIT | M_ZERO); if (ring->data == NULL) { device_printf(sc->sc_dev, "could not allocate soft data\n"); error = ENOMEM; goto fail; } error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); if (error != 0) { device_printf(sc->sc_dev, "could not create data DMA tag\n"); goto fail; } for (i = 0; i < count; i++) { data = &ring->data[i]; error = bus_dmamap_create(ring->data_dmat, 0, &data->map); if (error != 0) { device_printf(sc->sc_dev, "could not create DMA map\n"); goto fail; } data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); if (data->m == NULL) { device_printf(sc->sc_dev, "could not allocate rx mbuf\n"); error = ENOMEM; goto fail; } error = bus_dmamap_load(ring->data_dmat, data->map, mtod(data->m, void *), MCLBYTES, iwi_dma_map_addr, &data->physaddr, 0); if (error != 0) { device_printf(sc->sc_dev, "could not load rx buf DMA map"); goto fail; } data->reg = IWI_CSR_RX_BASE + i * 4; } return 0; fail: iwi_free_rx_ring(sc, ring); return error; } static void iwi_reset_rx_ring(struct iwi_softc *sc, struct iwi_rx_ring *ring) { ring->cur = 0; } static void iwi_free_rx_ring(struct iwi_softc *sc, struct iwi_rx_ring *ring) { struct iwi_rx_data *data; int i; if (ring->data != NULL) { for (i = 0; i < ring->count; i++) { data = &ring->data[i]; if (data->m != NULL) { bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(ring->data_dmat, data->map); m_freem(data->m); } if (data->map != NULL) bus_dmamap_destroy(ring->data_dmat, data->map); } free(ring->data, M_DEVBUF); } if (ring->data_dmat != NULL) bus_dma_tag_destroy(ring->data_dmat); } static int iwi_shutdown(device_t dev) { struct iwi_softc *sc = device_get_softc(dev); iwi_stop(sc); iwi_put_firmware(sc); /* ??? XXX */ return 0; } static int iwi_suspend(device_t dev) { struct iwi_softc *sc = device_get_softc(dev); struct ieee80211com *ic = &sc->sc_ic; ieee80211_suspend_all(ic); return 0; } static int iwi_resume(device_t dev) { struct iwi_softc *sc = device_get_softc(dev); struct ieee80211com *ic = &sc->sc_ic; pci_write_config(dev, 0x41, 0, 1); ieee80211_resume_all(ic); return 0; } static struct ieee80211_node * iwi_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN]) { struct iwi_node *in; in = malloc(sizeof (struct iwi_node), M_80211_NODE, M_NOWAIT | M_ZERO); if (in == NULL) return NULL; /* XXX assign sta table entry for adhoc */ in->in_station = -1; return &in->in_node; } static void iwi_node_free(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct iwi_softc *sc = ic->ic_softc; struct iwi_node *in = (struct iwi_node *)ni; if (in->in_station != -1) { DPRINTF(("%s mac %6D station %u\n", __func__, ni->ni_macaddr, ":", in->in_station)); free_unr(sc->sc_unr, in->in_station); } sc->sc_node_free(ni); } /* * Convert h/w rate code to IEEE rate code. */ static int iwi_cvtrate(int iwirate) { switch (iwirate) { case IWI_RATE_DS1: return 2; case IWI_RATE_DS2: return 4; case IWI_RATE_DS5: return 11; case IWI_RATE_DS11: return 22; case IWI_RATE_OFDM6: return 12; case IWI_RATE_OFDM9: return 18; case IWI_RATE_OFDM12: return 24; case IWI_RATE_OFDM18: return 36; case IWI_RATE_OFDM24: return 48; case IWI_RATE_OFDM36: return 72; case IWI_RATE_OFDM48: return 96; case IWI_RATE_OFDM54: return 108; } return 0; } /* * The firmware automatically adapts the transmit speed. We report its current * value here. */ static void iwi_media_status(struct ifnet *ifp, struct ifmediareq *imr) { struct ieee80211vap *vap = ifp->if_softc; struct ieee80211com *ic = vap->iv_ic; struct iwi_softc *sc = ic->ic_softc; struct ieee80211_node *ni; /* read current transmission rate from adapter */ ni = ieee80211_ref_node(vap->iv_bss); ni->ni_txrate = iwi_cvtrate(CSR_READ_4(sc, IWI_CSR_CURRENT_TX_RATE)); ieee80211_free_node(ni); ieee80211_media_status(ifp, imr); } static int iwi_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct iwi_vap *ivp = IWI_VAP(vap); struct ieee80211com *ic = vap->iv_ic; struct iwi_softc *sc = ic->ic_softc; IWI_LOCK_DECL; DPRINTF(("%s: %s -> %s flags 0x%x\n", __func__, ieee80211_state_name[vap->iv_state], ieee80211_state_name[nstate], sc->flags)); IEEE80211_UNLOCK(ic); IWI_LOCK(sc); switch (nstate) { case IEEE80211_S_INIT: /* * NB: don't try to do this if iwi_stop_master has * shutdown the firmware and disabled interrupts. */ if (vap->iv_state == IEEE80211_S_RUN && (sc->flags & IWI_FLAG_FW_INITED)) iwi_disassociate(sc, 0); break; case IEEE80211_S_AUTH: iwi_auth_and_assoc(sc, vap); break; case IEEE80211_S_RUN: if (vap->iv_opmode == IEEE80211_M_IBSS && vap->iv_state == IEEE80211_S_SCAN) { /* * XXX when joining an ibss network we are called * with a SCAN -> RUN transition on scan complete. * Use that to call iwi_auth_and_assoc. On completing * the join we are then called again with an * AUTH -> RUN transition and we want to do nothing. * This is all totally bogus and needs to be redone. */ iwi_auth_and_assoc(sc, vap); } else if (vap->iv_opmode == IEEE80211_M_MONITOR) ieee80211_runtask(ic, &sc->sc_monitortask); break; case IEEE80211_S_ASSOC: /* * If we are transitioning from AUTH then just wait * for the ASSOC status to come back from the firmware. * Otherwise we need to issue the association request. */ if (vap->iv_state == IEEE80211_S_AUTH) break; iwi_auth_and_assoc(sc, vap); break; default: break; } IWI_UNLOCK(sc); IEEE80211_LOCK(ic); return ivp->iwi_newstate(vap, nstate, arg); } /* * WME parameters coming from IEEE 802.11e specification. These values are * already declared in ieee80211_proto.c, but they are static so they can't * be reused here. */ static const struct wmeParams iwi_wme_cck_params[WME_NUM_AC] = { { 0, 3, 5, 7, 0 }, /* WME_AC_BE */ { 0, 3, 5, 10, 0 }, /* WME_AC_BK */ { 0, 2, 4, 5, 188 }, /* WME_AC_VI */ { 0, 2, 3, 4, 102 } /* WME_AC_VO */ }; static const struct wmeParams iwi_wme_ofdm_params[WME_NUM_AC] = { { 0, 3, 4, 6, 0 }, /* WME_AC_BE */ { 0, 3, 4, 10, 0 }, /* WME_AC_BK */ { 0, 2, 3, 4, 94 }, /* WME_AC_VI */ { 0, 2, 2, 3, 47 } /* WME_AC_VO */ }; #define IWI_EXP2(v) htole16((1 << (v)) - 1) #define IWI_USEC(v) htole16(IEEE80211_TXOP_TO_US(v)) static void iwi_wme_init(struct iwi_softc *sc) { const struct wmeParams *wmep; int ac; memset(sc->wme, 0, sizeof sc->wme); for (ac = 0; ac < WME_NUM_AC; ac++) { /* set WME values for CCK modulation */ wmep = &iwi_wme_cck_params[ac]; sc->wme[1].aifsn[ac] = wmep->wmep_aifsn; sc->wme[1].cwmin[ac] = IWI_EXP2(wmep->wmep_logcwmin); sc->wme[1].cwmax[ac] = IWI_EXP2(wmep->wmep_logcwmax); sc->wme[1].burst[ac] = IWI_USEC(wmep->wmep_txopLimit); sc->wme[1].acm[ac] = wmep->wmep_acm; /* set WME values for OFDM modulation */ wmep = &iwi_wme_ofdm_params[ac]; sc->wme[2].aifsn[ac] = wmep->wmep_aifsn; sc->wme[2].cwmin[ac] = IWI_EXP2(wmep->wmep_logcwmin); sc->wme[2].cwmax[ac] = IWI_EXP2(wmep->wmep_logcwmax); sc->wme[2].burst[ac] = IWI_USEC(wmep->wmep_txopLimit); sc->wme[2].acm[ac] = wmep->wmep_acm; } } static int iwi_wme_setparams(struct iwi_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; const struct wmeParams *wmep; int ac; for (ac = 0; ac < WME_NUM_AC; ac++) { /* set WME values for current operating mode */ wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac]; sc->wme[0].aifsn[ac] = wmep->wmep_aifsn; sc->wme[0].cwmin[ac] = IWI_EXP2(wmep->wmep_logcwmin); sc->wme[0].cwmax[ac] = IWI_EXP2(wmep->wmep_logcwmax); sc->wme[0].burst[ac] = IWI_USEC(wmep->wmep_txopLimit); sc->wme[0].acm[ac] = wmep->wmep_acm; } DPRINTF(("Setting WME parameters\n")); return iwi_cmd(sc, IWI_CMD_SET_WME_PARAMS, sc->wme, sizeof sc->wme); } #undef IWI_USEC #undef IWI_EXP2 static int iwi_wme_update(struct ieee80211com *ic) { struct iwi_softc *sc = ic->ic_softc; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); IWI_LOCK_DECL; /* * We may be called to update the WME parameters in * the adapter at various places. If we're already * associated then initiate the request immediately; * otherwise we assume the params will get sent down * to the adapter as part of the work iwi_auth_and_assoc * does. */ if (vap->iv_state == IEEE80211_S_RUN) { IWI_LOCK(sc); iwi_wme_setparams(sc); IWI_UNLOCK(sc); } return (0); } static int iwi_wme_setie(struct iwi_softc *sc) { struct ieee80211_wme_info wme; memset(&wme, 0, sizeof wme); wme.wme_id = IEEE80211_ELEMID_VENDOR; wme.wme_len = sizeof (struct ieee80211_wme_info) - 2; wme.wme_oui[0] = 0x00; wme.wme_oui[1] = 0x50; wme.wme_oui[2] = 0xf2; wme.wme_type = WME_OUI_TYPE; wme.wme_subtype = WME_INFO_OUI_SUBTYPE; wme.wme_version = WME_VERSION; wme.wme_info = 0; DPRINTF(("Setting WME IE (len=%u)\n", wme.wme_len)); return iwi_cmd(sc, IWI_CMD_SET_WMEIE, &wme, sizeof wme); } /* * Read 16 bits at address 'addr' from the serial EEPROM. */ static uint16_t iwi_read_prom_word(struct iwi_softc *sc, uint8_t addr) { uint32_t tmp; uint16_t val; int n; /* clock C once before the first command */ IWI_EEPROM_CTL(sc, 0); IWI_EEPROM_CTL(sc, IWI_EEPROM_S); IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_C); IWI_EEPROM_CTL(sc, IWI_EEPROM_S); /* write start bit (1) */ IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D); IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D | IWI_EEPROM_C); /* write READ opcode (10) */ IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D); IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_D | IWI_EEPROM_C); IWI_EEPROM_CTL(sc, IWI_EEPROM_S); IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_C); /* write address A7-A0 */ for (n = 7; n >= 0; n--) { IWI_EEPROM_CTL(sc, IWI_EEPROM_S | (((addr >> n) & 1) << IWI_EEPROM_SHIFT_D)); IWI_EEPROM_CTL(sc, IWI_EEPROM_S | (((addr >> n) & 1) << IWI_EEPROM_SHIFT_D) | IWI_EEPROM_C); } IWI_EEPROM_CTL(sc, IWI_EEPROM_S); /* read data Q15-Q0 */ val = 0; for (n = 15; n >= 0; n--) { IWI_EEPROM_CTL(sc, IWI_EEPROM_S | IWI_EEPROM_C); IWI_EEPROM_CTL(sc, IWI_EEPROM_S); tmp = MEM_READ_4(sc, IWI_MEM_EEPROM_CTL); val |= ((tmp & IWI_EEPROM_Q) >> IWI_EEPROM_SHIFT_Q) << n; } IWI_EEPROM_CTL(sc, 0); /* clear Chip Select and clock C */ IWI_EEPROM_CTL(sc, IWI_EEPROM_S); IWI_EEPROM_CTL(sc, 0); IWI_EEPROM_CTL(sc, IWI_EEPROM_C); return val; } static void iwi_setcurchan(struct iwi_softc *sc, int chan) { struct ieee80211com *ic = &sc->sc_ic; sc->curchan = chan; ieee80211_radiotap_chan_change(ic); } static void iwi_frame_intr(struct iwi_softc *sc, struct iwi_rx_data *data, int i, struct iwi_frame *frame) { struct ieee80211com *ic = &sc->sc_ic; struct mbuf *mnew, *m; struct ieee80211_node *ni; int type, error, framelen; int8_t rssi, nf; IWI_LOCK_DECL; framelen = le16toh(frame->len); if (framelen < IEEE80211_MIN_LEN || framelen > MCLBYTES) { /* * XXX >MCLBYTES is bogus as it means the h/w dma'd * out of bounds; need to figure out how to limit * frame size in the firmware */ /* XXX stat */ DPRINTFN(1, ("drop rx frame len=%u chan=%u rssi=%u rssi_dbm=%u\n", le16toh(frame->len), frame->chan, frame->rssi, frame->rssi_dbm)); return; } DPRINTFN(5, ("received frame len=%u chan=%u rssi=%u rssi_dbm=%u\n", le16toh(frame->len), frame->chan, frame->rssi, frame->rssi_dbm)); if (frame->chan != sc->curchan) iwi_setcurchan(sc, frame->chan); /* * Try to allocate a new mbuf for this ring element and load it before * processing the current mbuf. If the ring element cannot be loaded, * drop the received packet and reuse the old mbuf. In the unlikely * case that the old mbuf can't be reloaded either, explicitly panic. */ mnew = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); if (mnew == NULL) { counter_u64_add(ic->ic_ierrors, 1); return; } bus_dmamap_unload(sc->rxq.data_dmat, data->map); error = bus_dmamap_load(sc->rxq.data_dmat, data->map, mtod(mnew, void *), MCLBYTES, iwi_dma_map_addr, &data->physaddr, 0); if (error != 0) { m_freem(mnew); /* try to reload the old mbuf */ error = bus_dmamap_load(sc->rxq.data_dmat, data->map, mtod(data->m, void *), MCLBYTES, iwi_dma_map_addr, &data->physaddr, 0); if (error != 0) { /* very unlikely that it will fail... */ panic("%s: could not load old rx mbuf", device_get_name(sc->sc_dev)); } counter_u64_add(ic->ic_ierrors, 1); return; } /* * New mbuf successfully loaded, update Rx ring and continue * processing. */ m = data->m; data->m = mnew; CSR_WRITE_4(sc, data->reg, data->physaddr); /* finalize mbuf */ m->m_pkthdr.len = m->m_len = sizeof (struct iwi_hdr) + sizeof (struct iwi_frame) + framelen; m_adj(m, sizeof (struct iwi_hdr) + sizeof (struct iwi_frame)); rssi = frame->rssi_dbm; nf = -95; if (ieee80211_radiotap_active(ic)) { struct iwi_rx_radiotap_header *tap = &sc->sc_rxtap; tap->wr_flags = 0; tap->wr_antsignal = rssi; tap->wr_antnoise = nf; tap->wr_rate = iwi_cvtrate(frame->rate); tap->wr_antenna = frame->antenna; } IWI_UNLOCK(sc); ni = ieee80211_find_rxnode(ic, mtod(m, struct ieee80211_frame_min *)); if (ni != NULL) { type = ieee80211_input(ni, m, rssi, nf); ieee80211_free_node(ni); } else type = ieee80211_input_all(ic, m, rssi, nf); IWI_LOCK(sc); if (sc->sc_softled) { /* * Blink for any data frame. Otherwise do a * heartbeat-style blink when idle. The latter * is mainly for station mode where we depend on * periodic beacon frames to trigger the poll event. */ if (type == IEEE80211_FC0_TYPE_DATA) { sc->sc_rxrate = frame->rate; iwi_led_event(sc, IWI_LED_RX); } else if (ticks - sc->sc_ledevent >= sc->sc_ledidle) iwi_led_event(sc, IWI_LED_POLL); } } /* * Check for an association response frame to see if QoS * has been negotiated. We parse just enough to figure * out if we're supposed to use QoS. The proper solution * is to pass the frame up so ieee80211_input can do the * work but that's made hard by how things currently are * done in the driver. */ static void iwi_checkforqos(struct ieee80211vap *vap, const struct ieee80211_frame *wh, int len) { #define SUBTYPE(wh) ((wh)->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) const uint8_t *frm, *efrm, *wme; struct ieee80211_node *ni; uint16_t capinfo, status, associd; /* NB: +8 for capinfo, status, associd, and first ie */ if (!(sizeof(*wh)+8 < len && len < IEEE80211_MAX_LEN) || SUBTYPE(wh) != IEEE80211_FC0_SUBTYPE_ASSOC_RESP) return; /* * asresp frame format * [2] capability information * [2] status * [2] association ID * [tlv] supported rates * [tlv] extended supported rates * [tlv] WME */ frm = (const uint8_t *)&wh[1]; efrm = ((const uint8_t *) wh) + len; capinfo = le16toh(*(const uint16_t *)frm); frm += 2; status = le16toh(*(const uint16_t *)frm); frm += 2; associd = le16toh(*(const uint16_t *)frm); frm += 2; wme = NULL; while (efrm - frm > 1) { IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return); switch (*frm) { case IEEE80211_ELEMID_VENDOR: if (iswmeoui(frm)) wme = frm; break; } frm += frm[1] + 2; } ni = ieee80211_ref_node(vap->iv_bss); ni->ni_capinfo = capinfo; ni->ni_associd = associd & 0x3fff; if (wme != NULL) ni->ni_flags |= IEEE80211_NODE_QOS; else ni->ni_flags &= ~IEEE80211_NODE_QOS; ieee80211_free_node(ni); #undef SUBTYPE } static void iwi_notif_link_quality(struct iwi_softc *sc, struct iwi_notif *notif) { struct iwi_notif_link_quality *lq; int len; len = le16toh(notif->len); DPRINTFN(5, ("Notification (%u) - len=%d, sizeof=%zu\n", notif->type, len, sizeof(struct iwi_notif_link_quality) )); /* enforce length */ if (len != sizeof(struct iwi_notif_link_quality)) { DPRINTFN(5, ("Notification: (%u) too short (%d)\n", notif->type, len)); return; } lq = (struct iwi_notif_link_quality *)(notif + 1); memcpy(&sc->sc_linkqual, lq, sizeof(sc->sc_linkqual)); sc->sc_linkqual_valid = 1; } /* * Task queue callbacks for iwi_notification_intr used to avoid LOR's. */ static void iwi_notification_intr(struct iwi_softc *sc, struct iwi_notif *notif) { struct ieee80211com *ic = &sc->sc_ic; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); struct iwi_notif_scan_channel *chan; struct iwi_notif_scan_complete *scan; struct iwi_notif_authentication *auth; struct iwi_notif_association *assoc; struct iwi_notif_beacon_state *beacon; switch (notif->type) { case IWI_NOTIF_TYPE_SCAN_CHANNEL: chan = (struct iwi_notif_scan_channel *)(notif + 1); DPRINTFN(3, ("Scan of channel %u complete (%u)\n", ieee80211_ieee2mhz(chan->nchan, 0), chan->nchan)); /* Reset the timer, the scan is still going */ sc->sc_state_timer = 3; break; case IWI_NOTIF_TYPE_SCAN_COMPLETE: scan = (struct iwi_notif_scan_complete *)(notif + 1); DPRINTFN(2, ("Scan completed (%u, %u)\n", scan->nchan, scan->status)); IWI_STATE_END(sc, IWI_FW_SCANNING); /* * Monitor mode works by doing a passive scan to set * the channel and enable rx. Because we don't want * to abort a scan lest the firmware crash we scan * for a short period of time and automatically restart * the scan when notified the sweep has completed. */ if (vap->iv_opmode == IEEE80211_M_MONITOR) { ieee80211_runtask(ic, &sc->sc_monitortask); break; } if (scan->status == IWI_SCAN_COMPLETED) { /* NB: don't need to defer, net80211 does it for us */ ieee80211_scan_next(vap); } break; case IWI_NOTIF_TYPE_AUTHENTICATION: auth = (struct iwi_notif_authentication *)(notif + 1); switch (auth->state) { case IWI_AUTH_SUCCESS: DPRINTFN(2, ("Authentication succeeeded\n")); ieee80211_new_state(vap, IEEE80211_S_ASSOC, -1); break; case IWI_AUTH_FAIL: /* * These are delivered as an unsolicited deauth * (e.g. due to inactivity) or in response to an * associate request. */ sc->flags &= ~IWI_FLAG_ASSOCIATED; if (vap->iv_state != IEEE80211_S_RUN) { DPRINTFN(2, ("Authentication failed\n")); vap->iv_stats.is_rx_auth_fail++; IWI_STATE_END(sc, IWI_FW_ASSOCIATING); } else { DPRINTFN(2, ("Deauthenticated\n")); vap->iv_stats.is_rx_deauth++; } ieee80211_new_state(vap, IEEE80211_S_SCAN, -1); break; case IWI_AUTH_SENT_1: case IWI_AUTH_RECV_2: case IWI_AUTH_SEQ1_PASS: break; case IWI_AUTH_SEQ1_FAIL: DPRINTFN(2, ("Initial authentication handshake failed; " "you probably need shared key\n")); vap->iv_stats.is_rx_auth_fail++; IWI_STATE_END(sc, IWI_FW_ASSOCIATING); /* XXX retry shared key when in auto */ break; default: device_printf(sc->sc_dev, "unknown authentication state %u\n", auth->state); break; } break; case IWI_NOTIF_TYPE_ASSOCIATION: assoc = (struct iwi_notif_association *)(notif + 1); switch (assoc->state) { case IWI_AUTH_SUCCESS: /* re-association, do nothing */ break; case IWI_ASSOC_SUCCESS: DPRINTFN(2, ("Association succeeded\n")); sc->flags |= IWI_FLAG_ASSOCIATED; IWI_STATE_END(sc, IWI_FW_ASSOCIATING); iwi_checkforqos(vap, (const struct ieee80211_frame *)(assoc+1), le16toh(notif->len) - sizeof(*assoc) - 1); ieee80211_new_state(vap, IEEE80211_S_RUN, -1); break; case IWI_ASSOC_INIT: sc->flags &= ~IWI_FLAG_ASSOCIATED; switch (sc->fw_state) { case IWI_FW_ASSOCIATING: DPRINTFN(2, ("Association failed\n")); IWI_STATE_END(sc, IWI_FW_ASSOCIATING); ieee80211_new_state(vap, IEEE80211_S_SCAN, -1); break; case IWI_FW_DISASSOCIATING: DPRINTFN(2, ("Dissassociated\n")); IWI_STATE_END(sc, IWI_FW_DISASSOCIATING); vap->iv_stats.is_rx_disassoc++; ieee80211_new_state(vap, IEEE80211_S_SCAN, -1); break; } break; default: device_printf(sc->sc_dev, "unknown association state %u\n", assoc->state); break; } break; case IWI_NOTIF_TYPE_BEACON: /* XXX check struct length */ beacon = (struct iwi_notif_beacon_state *)(notif + 1); DPRINTFN(5, ("Beacon state (%u, %u)\n", beacon->state, le32toh(beacon->number))); if (beacon->state == IWI_BEACON_MISS) { /* * The firmware notifies us of every beacon miss * so we need to track the count against the * configured threshold before notifying the * 802.11 layer. * XXX try to roam, drop assoc only on much higher count */ if (le32toh(beacon->number) >= vap->iv_bmissthreshold) { DPRINTF(("Beacon miss: %u >= %u\n", le32toh(beacon->number), vap->iv_bmissthreshold)); vap->iv_stats.is_beacon_miss++; /* * It's pointless to notify the 802.11 layer * as it'll try to send a probe request (which * we'll discard) and then timeout and drop us * into scan state. Instead tell the firmware * to disassociate and then on completion we'll * kick the state machine to scan. */ ieee80211_runtask(ic, &sc->sc_disassoctask); } } break; case IWI_NOTIF_TYPE_CALIBRATION: case IWI_NOTIF_TYPE_NOISE: /* XXX handle? */ DPRINTFN(5, ("Notification (%u)\n", notif->type)); break; case IWI_NOTIF_TYPE_LINK_QUALITY: iwi_notif_link_quality(sc, notif); break; default: DPRINTF(("unknown notification type %u flags 0x%x len %u\n", notif->type, notif->flags, le16toh(notif->len))); break; } } static void iwi_rx_intr(struct iwi_softc *sc) { struct iwi_rx_data *data; struct iwi_hdr *hdr; uint32_t hw; hw = CSR_READ_4(sc, IWI_CSR_RX_RIDX); for (; sc->rxq.cur != hw;) { data = &sc->rxq.data[sc->rxq.cur]; bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); hdr = mtod(data->m, struct iwi_hdr *); switch (hdr->type) { case IWI_HDR_TYPE_FRAME: iwi_frame_intr(sc, data, sc->rxq.cur, (struct iwi_frame *)(hdr + 1)); break; case IWI_HDR_TYPE_NOTIF: iwi_notification_intr(sc, (struct iwi_notif *)(hdr + 1)); break; default: device_printf(sc->sc_dev, "unknown hdr type %u\n", hdr->type); } DPRINTFN(15, ("rx done idx=%u\n", sc->rxq.cur)); sc->rxq.cur = (sc->rxq.cur + 1) % IWI_RX_RING_COUNT; } /* tell the firmware what we have processed */ hw = (hw == 0) ? IWI_RX_RING_COUNT - 1 : hw - 1; CSR_WRITE_4(sc, IWI_CSR_RX_WIDX, hw); } static void iwi_tx_intr(struct iwi_softc *sc, struct iwi_tx_ring *txq) { struct iwi_tx_data *data; uint32_t hw; hw = CSR_READ_4(sc, txq->csr_ridx); while (txq->next != hw) { data = &txq->data[txq->next]; DPRINTFN(15, ("tx done idx=%u\n", txq->next)); bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(txq->data_dmat, data->map); ieee80211_tx_complete(data->ni, data->m, 0); data->ni = NULL; data->m = NULL; txq->queued--; txq->next = (txq->next + 1) % IWI_TX_RING_COUNT; } sc->sc_tx_timer = 0; if (sc->sc_softled) iwi_led_event(sc, IWI_LED_TX); iwi_start(sc); } static void iwi_fatal_error_intr(struct iwi_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); device_printf(sc->sc_dev, "firmware error\n"); if (vap != NULL) ieee80211_cancel_scan(vap); ieee80211_runtask(ic, &sc->sc_restarttask); sc->flags &= ~IWI_FLAG_BUSY; sc->sc_busy_timer = 0; wakeup(sc); } static void iwi_radio_off_intr(struct iwi_softc *sc) { ieee80211_runtask(&sc->sc_ic, &sc->sc_radiofftask); } static void iwi_intr(void *arg) { struct iwi_softc *sc = arg; uint32_t r; IWI_LOCK_DECL; IWI_LOCK(sc); if ((r = CSR_READ_4(sc, IWI_CSR_INTR)) == 0 || r == 0xffffffff) { IWI_UNLOCK(sc); return; } /* acknowledge interrupts */ CSR_WRITE_4(sc, IWI_CSR_INTR, r); if (r & IWI_INTR_FATAL_ERROR) { iwi_fatal_error_intr(sc); goto done; } if (r & IWI_INTR_FW_INITED) { if (!(r & (IWI_INTR_FATAL_ERROR | IWI_INTR_PARITY_ERROR))) wakeup(sc); } if (r & IWI_INTR_RADIO_OFF) iwi_radio_off_intr(sc); if (r & IWI_INTR_CMD_DONE) { sc->flags &= ~IWI_FLAG_BUSY; sc->sc_busy_timer = 0; wakeup(sc); } if (r & IWI_INTR_TX1_DONE) iwi_tx_intr(sc, &sc->txq[0]); if (r & IWI_INTR_TX2_DONE) iwi_tx_intr(sc, &sc->txq[1]); if (r & IWI_INTR_TX3_DONE) iwi_tx_intr(sc, &sc->txq[2]); if (r & IWI_INTR_TX4_DONE) iwi_tx_intr(sc, &sc->txq[3]); if (r & IWI_INTR_RX_DONE) iwi_rx_intr(sc); if (r & IWI_INTR_PARITY_ERROR) { /* XXX rate-limit */ device_printf(sc->sc_dev, "parity error\n"); } done: IWI_UNLOCK(sc); } static int iwi_cmd(struct iwi_softc *sc, uint8_t type, void *data, uint8_t len) { struct iwi_cmd_desc *desc; IWI_LOCK_ASSERT(sc); if (sc->flags & IWI_FLAG_BUSY) { device_printf(sc->sc_dev, "%s: cmd %d not sent, busy\n", __func__, type); return EAGAIN; } sc->flags |= IWI_FLAG_BUSY; sc->sc_busy_timer = 2; desc = &sc->cmdq.desc[sc->cmdq.cur]; desc->hdr.type = IWI_HDR_TYPE_COMMAND; desc->hdr.flags = IWI_HDR_FLAG_IRQ; desc->type = type; desc->len = len; memcpy(desc->data, data, len); bus_dmamap_sync(sc->cmdq.desc_dmat, sc->cmdq.desc_map, BUS_DMASYNC_PREWRITE); DPRINTFN(2, ("sending command idx=%u type=%u len=%u\n", sc->cmdq.cur, type, len)); sc->cmdq.cur = (sc->cmdq.cur + 1) % IWI_CMD_RING_COUNT; CSR_WRITE_4(sc, IWI_CSR_CMD_WIDX, sc->cmdq.cur); return msleep(sc, &sc->sc_mtx, 0, "iwicmd", hz); } static void iwi_write_ibssnode(struct iwi_softc *sc, const u_int8_t addr[IEEE80211_ADDR_LEN], int entry) { struct iwi_ibssnode node; /* write node information into NIC memory */ memset(&node, 0, sizeof node); IEEE80211_ADDR_COPY(node.bssid, addr); DPRINTF(("%s mac %6D station %u\n", __func__, node.bssid, ":", entry)); CSR_WRITE_REGION_1(sc, IWI_CSR_NODE_BASE + entry * sizeof node, (uint8_t *)&node, sizeof node); } static int iwi_tx_start(struct iwi_softc *sc, struct mbuf *m0, struct ieee80211_node *ni, int ac) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct iwi_node *in = (struct iwi_node *)ni; const struct ieee80211_frame *wh; struct ieee80211_key *k; const struct chanAccParams *cap; struct iwi_tx_ring *txq = &sc->txq[ac]; struct iwi_tx_data *data; struct iwi_tx_desc *desc; struct mbuf *mnew; bus_dma_segment_t segs[IWI_MAX_NSEG]; int error, nsegs, hdrlen, i; int ismcast, flags, xflags, staid; IWI_LOCK_ASSERT(sc); wh = mtod(m0, const struct ieee80211_frame *); /* NB: only data frames use this path */ hdrlen = ieee80211_hdrsize(wh); ismcast = IEEE80211_IS_MULTICAST(wh->i_addr1); flags = xflags = 0; if (!ismcast) flags |= IWI_DATA_FLAG_NEED_ACK; if (vap->iv_flags & IEEE80211_F_SHPREAMBLE) flags |= IWI_DATA_FLAG_SHPREAMBLE; if (IEEE80211_QOS_HAS_SEQ(wh)) { xflags |= IWI_DATA_XFLAG_QOS; cap = &ic->ic_wme.wme_chanParams; if (!cap->cap_wmeParams[ac].wmep_noackPolicy) flags &= ~IWI_DATA_FLAG_NEED_ACK; } /* * This is only used in IBSS mode where the firmware expect an index * in a h/w table instead of a destination address. */ if (vap->iv_opmode == IEEE80211_M_IBSS) { if (!ismcast) { if (in->in_station == -1) { in->in_station = alloc_unr(sc->sc_unr); if (in->in_station == -1) { /* h/w table is full */ if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1); m_freem(m0); ieee80211_free_node(ni); return 0; } iwi_write_ibssnode(sc, ni->ni_macaddr, in->in_station); } staid = in->in_station; } else { /* * Multicast addresses have no associated node * so there will be no station entry. We reserve * entry 0 for one mcast address and use that. * If there are many being used this will be * expensive and we'll need to do a better job * but for now this handles the broadcast case. */ if (!IEEE80211_ADDR_EQ(wh->i_addr1, sc->sc_mcast)) { IEEE80211_ADDR_COPY(sc->sc_mcast, wh->i_addr1); iwi_write_ibssnode(sc, sc->sc_mcast, 0); } staid = 0; } } else staid = 0; if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { k = ieee80211_crypto_encap(ni, m0); if (k == NULL) { m_freem(m0); return ENOBUFS; } /* packet header may have moved, reset our local pointer */ wh = mtod(m0, struct ieee80211_frame *); } if (ieee80211_radiotap_active_vap(vap)) { struct iwi_tx_radiotap_header *tap = &sc->sc_txtap; tap->wt_flags = 0; ieee80211_radiotap_tx(vap, m0); } data = &txq->data[txq->cur]; desc = &txq->desc[txq->cur]; /* save and trim IEEE802.11 header */ m_copydata(m0, 0, hdrlen, (caddr_t)&desc->wh); m_adj(m0, hdrlen); error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs, &nsegs, 0); if (error != 0 && error != EFBIG) { device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", error); m_freem(m0); return error; } if (error != 0) { mnew = m_defrag(m0, M_NOWAIT); if (mnew == NULL) { device_printf(sc->sc_dev, "could not defragment mbuf\n"); m_freem(m0); return ENOBUFS; } m0 = mnew; error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs, &nsegs, 0); if (error != 0) { device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", error); m_freem(m0); return error; } } data->m = m0; data->ni = ni; desc->hdr.type = IWI_HDR_TYPE_DATA; desc->hdr.flags = IWI_HDR_FLAG_IRQ; desc->station = staid; desc->cmd = IWI_DATA_CMD_TX; desc->len = htole16(m0->m_pkthdr.len); desc->flags = flags; desc->xflags = xflags; #if 0 if (vap->iv_flags & IEEE80211_F_PRIVACY) desc->wep_txkey = vap->iv_def_txkey; else #endif desc->flags |= IWI_DATA_FLAG_NO_WEP; desc->nseg = htole32(nsegs); for (i = 0; i < nsegs; i++) { desc->seg_addr[i] = htole32(segs[i].ds_addr); desc->seg_len[i] = htole16(segs[i].ds_len); } bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); DPRINTFN(5, ("sending data frame txq=%u idx=%u len=%u nseg=%u\n", ac, txq->cur, le16toh(desc->len), nsegs)); txq->queued++; txq->cur = (txq->cur + 1) % IWI_TX_RING_COUNT; CSR_WRITE_4(sc, txq->csr_widx, txq->cur); return 0; } static int iwi_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, const struct ieee80211_bpf_params *params) { /* no support; just discard */ m_freem(m); ieee80211_free_node(ni); return 0; } static int iwi_transmit(struct ieee80211com *ic, struct mbuf *m) { struct iwi_softc *sc = ic->ic_softc; int error; IWI_LOCK_DECL; IWI_LOCK(sc); if (!sc->sc_running) { IWI_UNLOCK(sc); return (ENXIO); } error = mbufq_enqueue(&sc->sc_snd, m); if (error) { IWI_UNLOCK(sc); return (error); } iwi_start(sc); IWI_UNLOCK(sc); return (0); } static void iwi_start(struct iwi_softc *sc) { struct mbuf *m; struct ieee80211_node *ni; int ac; IWI_LOCK_ASSERT(sc); while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { ac = M_WME_GETAC(m); if (sc->txq[ac].queued > IWI_TX_RING_COUNT - 8) { /* there is no place left in this ring; tail drop */ /* XXX tail drop */ mbufq_prepend(&sc->sc_snd, m); break; } ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; if (iwi_tx_start(sc, m, ni, ac) != 0) { - ieee80211_free_node(ni); if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1); + ieee80211_free_node(ni); break; } sc->sc_tx_timer = 5; } } static void iwi_watchdog(void *arg) { struct iwi_softc *sc = arg; struct ieee80211com *ic = &sc->sc_ic; IWI_LOCK_ASSERT(sc); if (sc->sc_tx_timer > 0) { if (--sc->sc_tx_timer == 0) { device_printf(sc->sc_dev, "device timeout\n"); counter_u64_add(ic->ic_oerrors, 1); ieee80211_runtask(ic, &sc->sc_restarttask); } } if (sc->sc_state_timer > 0) { if (--sc->sc_state_timer == 0) { device_printf(sc->sc_dev, "firmware stuck in state %d, resetting\n", sc->fw_state); if (sc->fw_state == IWI_FW_SCANNING) ieee80211_cancel_scan(TAILQ_FIRST(&ic->ic_vaps)); ieee80211_runtask(ic, &sc->sc_restarttask); sc->sc_state_timer = 3; } } if (sc->sc_busy_timer > 0) { if (--sc->sc_busy_timer == 0) { device_printf(sc->sc_dev, "firmware command timeout, resetting\n"); ieee80211_runtask(ic, &sc->sc_restarttask); } } callout_reset(&sc->sc_wdtimer, hz, iwi_watchdog, sc); } static void iwi_parent(struct ieee80211com *ic) { struct iwi_softc *sc = ic->ic_softc; int startall = 0; IWI_LOCK_DECL; IWI_LOCK(sc); if (ic->ic_nrunning > 0) { if (!sc->sc_running) { iwi_init_locked(sc); startall = 1; } } else if (sc->sc_running) iwi_stop_locked(sc); IWI_UNLOCK(sc); if (startall) ieee80211_start_all(ic); } static int iwi_ioctl(struct ieee80211com *ic, u_long cmd, void *data) { struct ifreq *ifr = data; struct iwi_softc *sc = ic->ic_softc; int error; IWI_LOCK_DECL; IWI_LOCK(sc); switch (cmd) { case SIOCGIWISTATS: /* XXX validate permissions/memory/etc? */ error = copyout(&sc->sc_linkqual, ifr->ifr_data, sizeof(struct iwi_notif_link_quality)); break; case SIOCZIWISTATS: memset(&sc->sc_linkqual, 0, sizeof(struct iwi_notif_link_quality)); error = 0; break; default: error = ENOTTY; break; } IWI_UNLOCK(sc); return (error); } static void iwi_stop_master(struct iwi_softc *sc) { uint32_t tmp; int ntries; /* disable interrupts */ CSR_WRITE_4(sc, IWI_CSR_INTR_MASK, 0); CSR_WRITE_4(sc, IWI_CSR_RST, IWI_RST_STOP_MASTER); for (ntries = 0; ntries < 5; ntries++) { if (CSR_READ_4(sc, IWI_CSR_RST) & IWI_RST_MASTER_DISABLED) break; DELAY(10); } if (ntries == 5) device_printf(sc->sc_dev, "timeout waiting for master\n"); tmp = CSR_READ_4(sc, IWI_CSR_RST); CSR_WRITE_4(sc, IWI_CSR_RST, tmp | IWI_RST_PRINCETON_RESET); sc->flags &= ~IWI_FLAG_FW_INITED; } static int iwi_reset(struct iwi_softc *sc) { uint32_t tmp; int i, ntries; iwi_stop_master(sc); tmp = CSR_READ_4(sc, IWI_CSR_CTL); CSR_WRITE_4(sc, IWI_CSR_CTL, tmp | IWI_CTL_INIT); CSR_WRITE_4(sc, IWI_CSR_READ_INT, IWI_READ_INT_INIT_HOST); /* wait for clock stabilization */ for (ntries = 0; ntries < 1000; ntries++) { if (CSR_READ_4(sc, IWI_CSR_CTL) & IWI_CTL_CLOCK_READY) break; DELAY(200); } if (ntries == 1000) { device_printf(sc->sc_dev, "timeout waiting for clock stabilization\n"); return EIO; } tmp = CSR_READ_4(sc, IWI_CSR_RST); CSR_WRITE_4(sc, IWI_CSR_RST, tmp | IWI_RST_SOFT_RESET); DELAY(10); tmp = CSR_READ_4(sc, IWI_CSR_CTL); CSR_WRITE_4(sc, IWI_CSR_CTL, tmp | IWI_CTL_INIT); /* clear NIC memory */ CSR_WRITE_4(sc, IWI_CSR_AUTOINC_ADDR, 0); for (i = 0; i < 0xc000; i++) CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, 0); return 0; } static const struct iwi_firmware_ohdr * iwi_setup_ofw(struct iwi_softc *sc, struct iwi_fw *fw) { const struct firmware *fp = fw->fp; const struct iwi_firmware_ohdr *hdr; if (fp->datasize < sizeof (struct iwi_firmware_ohdr)) { device_printf(sc->sc_dev, "image '%s' too small\n", fp->name); return NULL; } hdr = (const struct iwi_firmware_ohdr *)fp->data; if ((IWI_FW_GET_MAJOR(le32toh(hdr->version)) != IWI_FW_REQ_MAJOR) || (IWI_FW_GET_MINOR(le32toh(hdr->version)) != IWI_FW_REQ_MINOR)) { device_printf(sc->sc_dev, "version for '%s' %d.%d != %d.%d\n", fp->name, IWI_FW_GET_MAJOR(le32toh(hdr->version)), IWI_FW_GET_MINOR(le32toh(hdr->version)), IWI_FW_REQ_MAJOR, IWI_FW_REQ_MINOR); return NULL; } fw->data = ((const char *) fp->data) + sizeof(struct iwi_firmware_ohdr); fw->size = fp->datasize - sizeof(struct iwi_firmware_ohdr); fw->name = fp->name; return hdr; } static const struct iwi_firmware_ohdr * iwi_setup_oucode(struct iwi_softc *sc, struct iwi_fw *fw) { const struct iwi_firmware_ohdr *hdr; hdr = iwi_setup_ofw(sc, fw); if (hdr != NULL && le32toh(hdr->mode) != IWI_FW_MODE_UCODE) { device_printf(sc->sc_dev, "%s is not a ucode image\n", fw->name); hdr = NULL; } return hdr; } static void iwi_getfw(struct iwi_fw *fw, const char *fwname, struct iwi_fw *uc, const char *ucname) { if (fw->fp == NULL) fw->fp = firmware_get(fwname); /* NB: pre-3.0 ucode is packaged separately */ if (uc->fp == NULL && fw->fp != NULL && fw->fp->version < 300) uc->fp = firmware_get(ucname); } /* * Get the required firmware images if not already loaded. * Note that we hold firmware images so long as the device * is marked up in case we need to reload them on device init. * This is necessary because we re-init the device sometimes * from a context where we cannot read from the filesystem * (e.g. from the taskqueue thread when rfkill is re-enabled). * XXX return 0 on success, 1 on error. * * NB: the order of get'ing and put'ing images here is * intentional to support handling firmware images bundled * by operating mode and/or all together in one file with * the boot firmware as "master". */ static int iwi_get_firmware(struct iwi_softc *sc, enum ieee80211_opmode opmode) { const struct iwi_firmware_hdr *hdr; const struct firmware *fp; /* invalidate cached firmware on mode change */ if (sc->fw_mode != opmode) iwi_put_firmware(sc); switch (opmode) { case IEEE80211_M_STA: iwi_getfw(&sc->fw_fw, "iwi_bss", &sc->fw_uc, "iwi_ucode_bss"); break; case IEEE80211_M_IBSS: iwi_getfw(&sc->fw_fw, "iwi_ibss", &sc->fw_uc, "iwi_ucode_ibss"); break; case IEEE80211_M_MONITOR: iwi_getfw(&sc->fw_fw, "iwi_monitor", &sc->fw_uc, "iwi_ucode_monitor"); break; default: device_printf(sc->sc_dev, "unknown opmode %d\n", opmode); return EINVAL; } fp = sc->fw_fw.fp; if (fp == NULL) { device_printf(sc->sc_dev, "could not load firmware\n"); goto bad; } if (fp->version < 300) { /* * Firmware prior to 3.0 was packaged as separate * boot, firmware, and ucode images. Verify the * ucode image was read in, retrieve the boot image * if needed, and check version stamps for consistency. * The version stamps in the data are also checked * above; this is a bit paranoid but is a cheap * safeguard against mis-packaging. */ if (sc->fw_uc.fp == NULL) { device_printf(sc->sc_dev, "could not load ucode\n"); goto bad; } if (sc->fw_boot.fp == NULL) { sc->fw_boot.fp = firmware_get("iwi_boot"); if (sc->fw_boot.fp == NULL) { device_printf(sc->sc_dev, "could not load boot firmware\n"); goto bad; } } if (sc->fw_boot.fp->version != sc->fw_fw.fp->version || sc->fw_boot.fp->version != sc->fw_uc.fp->version) { device_printf(sc->sc_dev, "firmware version mismatch: " "'%s' is %d, '%s' is %d, '%s' is %d\n", sc->fw_boot.fp->name, sc->fw_boot.fp->version, sc->fw_uc.fp->name, sc->fw_uc.fp->version, sc->fw_fw.fp->name, sc->fw_fw.fp->version ); goto bad; } /* * Check and setup each image. */ if (iwi_setup_oucode(sc, &sc->fw_uc) == NULL || iwi_setup_ofw(sc, &sc->fw_boot) == NULL || iwi_setup_ofw(sc, &sc->fw_fw) == NULL) goto bad; } else { /* * Check and setup combined image. */ if (fp->datasize < sizeof(struct iwi_firmware_hdr)) { device_printf(sc->sc_dev, "image '%s' too small\n", fp->name); goto bad; } hdr = (const struct iwi_firmware_hdr *)fp->data; if (fp->datasize < sizeof(*hdr) + le32toh(hdr->bsize) + le32toh(hdr->usize) + le32toh(hdr->fsize)) { device_printf(sc->sc_dev, "image '%s' too small (2)\n", fp->name); goto bad; } sc->fw_boot.data = ((const char *) fp->data) + sizeof(*hdr); sc->fw_boot.size = le32toh(hdr->bsize); sc->fw_boot.name = fp->name; sc->fw_uc.data = sc->fw_boot.data + sc->fw_boot.size; sc->fw_uc.size = le32toh(hdr->usize); sc->fw_uc.name = fp->name; sc->fw_fw.data = sc->fw_uc.data + sc->fw_uc.size; sc->fw_fw.size = le32toh(hdr->fsize); sc->fw_fw.name = fp->name; } #if 0 device_printf(sc->sc_dev, "boot %d ucode %d fw %d bytes\n", sc->fw_boot.size, sc->fw_uc.size, sc->fw_fw.size); #endif sc->fw_mode = opmode; return 0; bad: iwi_put_firmware(sc); return 1; } static void iwi_put_fw(struct iwi_fw *fw) { if (fw->fp != NULL) { firmware_put(fw->fp, FIRMWARE_UNLOAD); fw->fp = NULL; } fw->data = NULL; fw->size = 0; fw->name = NULL; } /* * Release any cached firmware images. */ static void iwi_put_firmware(struct iwi_softc *sc) { iwi_put_fw(&sc->fw_uc); iwi_put_fw(&sc->fw_fw); iwi_put_fw(&sc->fw_boot); } static int iwi_load_ucode(struct iwi_softc *sc, const struct iwi_fw *fw) { uint32_t tmp; const uint16_t *w; const char *uc = fw->data; size_t size = fw->size; int i, ntries, error; IWI_LOCK_ASSERT(sc); error = 0; CSR_WRITE_4(sc, IWI_CSR_RST, CSR_READ_4(sc, IWI_CSR_RST) | IWI_RST_STOP_MASTER); for (ntries = 0; ntries < 5; ntries++) { if (CSR_READ_4(sc, IWI_CSR_RST) & IWI_RST_MASTER_DISABLED) break; DELAY(10); } if (ntries == 5) { device_printf(sc->sc_dev, "timeout waiting for master\n"); error = EIO; goto fail; } MEM_WRITE_4(sc, 0x3000e0, 0x80000000); DELAY(5000); tmp = CSR_READ_4(sc, IWI_CSR_RST); tmp &= ~IWI_RST_PRINCETON_RESET; CSR_WRITE_4(sc, IWI_CSR_RST, tmp); DELAY(5000); MEM_WRITE_4(sc, 0x3000e0, 0); DELAY(1000); MEM_WRITE_4(sc, IWI_MEM_EEPROM_EVENT, 1); DELAY(1000); MEM_WRITE_4(sc, IWI_MEM_EEPROM_EVENT, 0); DELAY(1000); MEM_WRITE_1(sc, 0x200000, 0x00); MEM_WRITE_1(sc, 0x200000, 0x40); DELAY(1000); /* write microcode into adapter memory */ for (w = (const uint16_t *)uc; size > 0; w++, size -= 2) MEM_WRITE_2(sc, 0x200010, htole16(*w)); MEM_WRITE_1(sc, 0x200000, 0x00); MEM_WRITE_1(sc, 0x200000, 0x80); /* wait until we get an answer */ for (ntries = 0; ntries < 100; ntries++) { if (MEM_READ_1(sc, 0x200000) & 1) break; DELAY(100); } if (ntries == 100) { device_printf(sc->sc_dev, "timeout waiting for ucode to initialize\n"); error = EIO; goto fail; } /* read the answer or the firmware will not initialize properly */ for (i = 0; i < 7; i++) MEM_READ_4(sc, 0x200004); MEM_WRITE_1(sc, 0x200000, 0x00); fail: return error; } /* macro to handle unaligned little endian data in firmware image */ #define GETLE32(p) ((p)[0] | (p)[1] << 8 | (p)[2] << 16 | (p)[3] << 24) static int iwi_load_firmware(struct iwi_softc *sc, const struct iwi_fw *fw) { u_char *p, *end; uint32_t sentinel, ctl, src, dst, sum, len, mlen, tmp; int ntries, error; IWI_LOCK_ASSERT(sc); /* copy firmware image to DMA memory */ memcpy(sc->fw_virtaddr, fw->data, fw->size); /* make sure the adapter will get up-to-date values */ bus_dmamap_sync(sc->fw_dmat, sc->fw_map, BUS_DMASYNC_PREWRITE); /* tell the adapter where the command blocks are stored */ MEM_WRITE_4(sc, 0x3000a0, 0x27000); /* * Store command blocks into adapter's internal memory using register * indirections. The adapter will read the firmware image through DMA * using information stored in command blocks. */ src = sc->fw_physaddr; p = sc->fw_virtaddr; end = p + fw->size; CSR_WRITE_4(sc, IWI_CSR_AUTOINC_ADDR, 0x27000); while (p < end) { dst = GETLE32(p); p += 4; src += 4; len = GETLE32(p); p += 4; src += 4; p += len; while (len > 0) { mlen = min(len, IWI_CB_MAXDATALEN); ctl = IWI_CB_DEFAULT_CTL | mlen; sum = ctl ^ src ^ dst; /* write a command block */ CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, ctl); CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, src); CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, dst); CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, sum); src += mlen; dst += mlen; len -= mlen; } } /* write a fictive final command block (sentinel) */ sentinel = CSR_READ_4(sc, IWI_CSR_AUTOINC_ADDR); CSR_WRITE_4(sc, IWI_CSR_AUTOINC_DATA, 0); tmp = CSR_READ_4(sc, IWI_CSR_RST); tmp &= ~(IWI_RST_MASTER_DISABLED | IWI_RST_STOP_MASTER); CSR_WRITE_4(sc, IWI_CSR_RST, tmp); /* tell the adapter to start processing command blocks */ MEM_WRITE_4(sc, 0x3000a4, 0x540100); /* wait until the adapter reaches the sentinel */ for (ntries = 0; ntries < 400; ntries++) { if (MEM_READ_4(sc, 0x3000d0) >= sentinel) break; DELAY(100); } /* sync dma, just in case */ bus_dmamap_sync(sc->fw_dmat, sc->fw_map, BUS_DMASYNC_POSTWRITE); if (ntries == 400) { device_printf(sc->sc_dev, "timeout processing command blocks for %s firmware\n", fw->name); return EIO; } /* we're done with command blocks processing */ MEM_WRITE_4(sc, 0x3000a4, 0x540c00); /* allow interrupts so we know when the firmware is ready */ CSR_WRITE_4(sc, IWI_CSR_INTR_MASK, IWI_INTR_MASK); /* tell the adapter to initialize the firmware */ CSR_WRITE_4(sc, IWI_CSR_RST, 0); tmp = CSR_READ_4(sc, IWI_CSR_CTL); CSR_WRITE_4(sc, IWI_CSR_CTL, tmp | IWI_CTL_ALLOW_STANDBY); /* wait at most one second for firmware initialization to complete */ if ((error = msleep(sc, &sc->sc_mtx, 0, "iwiinit", hz)) != 0) { device_printf(sc->sc_dev, "timeout waiting for %s firmware " "initialization to complete\n", fw->name); } return error; } static int iwi_setpowermode(struct iwi_softc *sc, struct ieee80211vap *vap) { uint32_t data; if (vap->iv_flags & IEEE80211_F_PMGTON) { /* XXX set more fine-grained operation */ data = htole32(IWI_POWER_MODE_MAX); } else data = htole32(IWI_POWER_MODE_CAM); DPRINTF(("Setting power mode to %u\n", le32toh(data))); return iwi_cmd(sc, IWI_CMD_SET_POWER_MODE, &data, sizeof data); } static int iwi_setwepkeys(struct iwi_softc *sc, struct ieee80211vap *vap) { struct iwi_wep_key wepkey; struct ieee80211_key *wk; int error, i; for (i = 0; i < IEEE80211_WEP_NKID; i++) { wk = &vap->iv_nw_keys[i]; wepkey.cmd = IWI_WEP_KEY_CMD_SETKEY; wepkey.idx = i; wepkey.len = wk->wk_keylen; memset(wepkey.key, 0, sizeof wepkey.key); memcpy(wepkey.key, wk->wk_key, wk->wk_keylen); DPRINTF(("Setting wep key index %u len %u\n", wepkey.idx, wepkey.len)); error = iwi_cmd(sc, IWI_CMD_SET_WEP_KEY, &wepkey, sizeof wepkey); if (error != 0) return error; } return 0; } static int iwi_config(struct iwi_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct iwi_configuration config; struct iwi_rateset rs; struct iwi_txpower power; uint32_t data; int error, i; IWI_LOCK_ASSERT(sc); DPRINTF(("Setting MAC address to %6D\n", ic->ic_macaddr, ":")); error = iwi_cmd(sc, IWI_CMD_SET_MAC_ADDRESS, ic->ic_macaddr, IEEE80211_ADDR_LEN); if (error != 0) return error; memset(&config, 0, sizeof config); config.bluetooth_coexistence = sc->bluetooth; config.silence_threshold = 0x1e; config.antenna = sc->antenna; config.multicast_enabled = 1; config.answer_pbreq = (ic->ic_opmode == IEEE80211_M_IBSS) ? 1 : 0; config.disable_unicast_decryption = 1; config.disable_multicast_decryption = 1; if (ic->ic_opmode == IEEE80211_M_MONITOR) { config.allow_invalid_frames = 1; config.allow_beacon_and_probe_resp = 1; config.allow_mgt = 1; } DPRINTF(("Configuring adapter\n")); error = iwi_cmd(sc, IWI_CMD_SET_CONFIG, &config, sizeof config); if (error != 0) return error; if (ic->ic_opmode == IEEE80211_M_IBSS) { power.mode = IWI_MODE_11B; power.nchan = 11; for (i = 0; i < 11; i++) { power.chan[i].chan = i + 1; power.chan[i].power = IWI_TXPOWER_MAX; } DPRINTF(("Setting .11b channels tx power\n")); error = iwi_cmd(sc, IWI_CMD_SET_TX_POWER, &power, sizeof power); if (error != 0) return error; power.mode = IWI_MODE_11G; DPRINTF(("Setting .11g channels tx power\n")); error = iwi_cmd(sc, IWI_CMD_SET_TX_POWER, &power, sizeof power); if (error != 0) return error; } memset(&rs, 0, sizeof rs); rs.mode = IWI_MODE_11G; rs.type = IWI_RATESET_TYPE_SUPPORTED; rs.nrates = ic->ic_sup_rates[IEEE80211_MODE_11G].rs_nrates; memcpy(rs.rates, ic->ic_sup_rates[IEEE80211_MODE_11G].rs_rates, rs.nrates); DPRINTF(("Setting .11bg supported rates (%u)\n", rs.nrates)); error = iwi_cmd(sc, IWI_CMD_SET_RATES, &rs, sizeof rs); if (error != 0) return error; memset(&rs, 0, sizeof rs); rs.mode = IWI_MODE_11A; rs.type = IWI_RATESET_TYPE_SUPPORTED; rs.nrates = ic->ic_sup_rates[IEEE80211_MODE_11A].rs_nrates; memcpy(rs.rates, ic->ic_sup_rates[IEEE80211_MODE_11A].rs_rates, rs.nrates); DPRINTF(("Setting .11a supported rates (%u)\n", rs.nrates)); error = iwi_cmd(sc, IWI_CMD_SET_RATES, &rs, sizeof rs); if (error != 0) return error; data = htole32(arc4random()); DPRINTF(("Setting initialization vector to %u\n", le32toh(data))); error = iwi_cmd(sc, IWI_CMD_SET_IV, &data, sizeof data); if (error != 0) return error; /* enable adapter */ DPRINTF(("Enabling adapter\n")); return iwi_cmd(sc, IWI_CMD_ENABLE, NULL, 0); } static __inline void set_scan_type(struct iwi_scan_ext *scan, int ix, int scan_type) { uint8_t *st = &scan->scan_type[ix / 2]; if (ix % 2) *st = (*st & 0xf0) | ((scan_type & 0xf) << 0); else *st = (*st & 0x0f) | ((scan_type & 0xf) << 4); } static int scan_type(const struct ieee80211_scan_state *ss, const struct ieee80211_channel *chan) { /* We can only set one essid for a directed scan */ if (ss->ss_nssid != 0) return IWI_SCAN_TYPE_BDIRECTED; if ((ss->ss_flags & IEEE80211_SCAN_ACTIVE) && (chan->ic_flags & IEEE80211_CHAN_PASSIVE) == 0) return IWI_SCAN_TYPE_BROADCAST; return IWI_SCAN_TYPE_PASSIVE; } static __inline int scan_band(const struct ieee80211_channel *c) { return IEEE80211_IS_CHAN_5GHZ(c) ? IWI_CHAN_5GHZ : IWI_CHAN_2GHZ; } static void iwi_monitor_scan(void *arg, int npending) { struct iwi_softc *sc = arg; IWI_LOCK_DECL; IWI_LOCK(sc); (void) iwi_scanchan(sc, 2000, 0); IWI_UNLOCK(sc); } /* * Start a scan on the current channel or all channels. */ static int iwi_scanchan(struct iwi_softc *sc, unsigned long maxdwell, int allchan) { struct ieee80211com *ic = &sc->sc_ic; struct ieee80211_channel *chan; struct ieee80211_scan_state *ss; struct iwi_scan_ext scan; int error = 0; IWI_LOCK_ASSERT(sc); if (sc->fw_state == IWI_FW_SCANNING) { /* * This should not happen as we only trigger scan_next after * completion */ DPRINTF(("%s: called too early - still scanning\n", __func__)); return (EBUSY); } IWI_STATE_BEGIN(sc, IWI_FW_SCANNING); ss = ic->ic_scan; memset(&scan, 0, sizeof scan); scan.full_scan_index = htole32(++sc->sc_scangen); scan.dwell_time[IWI_SCAN_TYPE_PASSIVE] = htole16(maxdwell); if (ic->ic_flags_ext & IEEE80211_FEXT_BGSCAN) { /* * Use very short dwell times for when we send probe request * frames. Without this bg scans hang. Ideally this should * be handled with early-termination as done by net80211 but * that's not feasible (aborting a scan is problematic). */ scan.dwell_time[IWI_SCAN_TYPE_BROADCAST] = htole16(30); scan.dwell_time[IWI_SCAN_TYPE_BDIRECTED] = htole16(30); } else { scan.dwell_time[IWI_SCAN_TYPE_BROADCAST] = htole16(maxdwell); scan.dwell_time[IWI_SCAN_TYPE_BDIRECTED] = htole16(maxdwell); } /* We can only set one essid for a directed scan */ if (ss->ss_nssid != 0) { error = iwi_cmd(sc, IWI_CMD_SET_ESSID, ss->ss_ssid[0].ssid, ss->ss_ssid[0].len); if (error) return (error); } if (allchan) { int i, next, band, b, bstart; /* * Convert scan list to run-length encoded channel list * the firmware requires (preserving the order setup by * net80211). The first entry in each run specifies the * band and the count of items in the run. */ next = 0; /* next open slot */ bstart = 0; /* NB: not needed, silence compiler */ band = -1; /* NB: impossible value */ KASSERT(ss->ss_last > 0, ("no channels")); for (i = 0; i < ss->ss_last; i++) { chan = ss->ss_chans[i]; b = scan_band(chan); if (b != band) { if (band != -1) scan.channels[bstart] = (next - bstart) | band; /* NB: this allocates a slot for the run-len */ band = b, bstart = next++; } if (next >= IWI_SCAN_CHANNELS) { DPRINTF(("truncating scan list\n")); break; } scan.channels[next] = ieee80211_chan2ieee(ic, chan); set_scan_type(&scan, next, scan_type(ss, chan)); next++; } scan.channels[bstart] = (next - bstart) | band; } else { /* Scan the current channel only */ chan = ic->ic_curchan; scan.channels[0] = 1 | scan_band(chan); scan.channels[1] = ieee80211_chan2ieee(ic, chan); set_scan_type(&scan, 1, scan_type(ss, chan)); } #ifdef IWI_DEBUG if (iwi_debug > 0) { static const char *scantype[8] = { "PSTOP", "PASV", "DIR", "BCAST", "BDIR", "5", "6", "7" }; int i; printf("Scan request: index %u dwell %d/%d/%d\n" , le32toh(scan.full_scan_index) , le16toh(scan.dwell_time[IWI_SCAN_TYPE_PASSIVE]) , le16toh(scan.dwell_time[IWI_SCAN_TYPE_BROADCAST]) , le16toh(scan.dwell_time[IWI_SCAN_TYPE_BDIRECTED]) ); i = 0; do { int run = scan.channels[i]; if (run == 0) break; printf("Scan %d %s channels:", run & 0x3f, run & IWI_CHAN_2GHZ ? "2.4GHz" : "5GHz"); for (run &= 0x3f, i++; run > 0; run--, i++) { uint8_t type = scan.scan_type[i/2]; printf(" %u/%s", scan.channels[i], scantype[(i & 1 ? type : type>>4) & 7]); } printf("\n"); } while (i < IWI_SCAN_CHANNELS); } #endif return (iwi_cmd(sc, IWI_CMD_SCAN_EXT, &scan, sizeof scan)); } static int iwi_set_sensitivity(struct iwi_softc *sc, int8_t rssi_dbm) { struct iwi_sensitivity sens; DPRINTF(("Setting sensitivity to %d\n", rssi_dbm)); memset(&sens, 0, sizeof sens); sens.rssi = htole16(rssi_dbm); return iwi_cmd(sc, IWI_CMD_SET_SENSITIVITY, &sens, sizeof sens); } static int iwi_auth_and_assoc(struct iwi_softc *sc, struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ifnet *ifp = vap->iv_ifp; struct ieee80211_node *ni; struct iwi_configuration config; struct iwi_associate *assoc = &sc->assoc; struct iwi_rateset rs; uint16_t capinfo; uint32_t data; int error, mode; IWI_LOCK_ASSERT(sc); ni = ieee80211_ref_node(vap->iv_bss); if (sc->flags & IWI_FLAG_ASSOCIATED) { DPRINTF(("Already associated\n")); return (-1); } IWI_STATE_BEGIN(sc, IWI_FW_ASSOCIATING); error = 0; mode = 0; if (IEEE80211_IS_CHAN_A(ic->ic_curchan)) mode = IWI_MODE_11A; else if (IEEE80211_IS_CHAN_G(ic->ic_curchan)) mode = IWI_MODE_11G; if (IEEE80211_IS_CHAN_B(ic->ic_curchan)) mode = IWI_MODE_11B; if (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) { memset(&config, 0, sizeof config); config.bluetooth_coexistence = sc->bluetooth; config.antenna = sc->antenna; config.multicast_enabled = 1; if (mode == IWI_MODE_11G) config.use_protection = 1; config.answer_pbreq = (vap->iv_opmode == IEEE80211_M_IBSS) ? 1 : 0; config.disable_unicast_decryption = 1; config.disable_multicast_decryption = 1; DPRINTF(("Configuring adapter\n")); error = iwi_cmd(sc, IWI_CMD_SET_CONFIG, &config, sizeof config); if (error != 0) goto done; } #ifdef IWI_DEBUG if (iwi_debug > 0) { printf("Setting ESSID to "); ieee80211_print_essid(ni->ni_essid, ni->ni_esslen); printf("\n"); } #endif error = iwi_cmd(sc, IWI_CMD_SET_ESSID, ni->ni_essid, ni->ni_esslen); if (error != 0) goto done; error = iwi_setpowermode(sc, vap); if (error != 0) goto done; data = htole32(vap->iv_rtsthreshold); DPRINTF(("Setting RTS threshold to %u\n", le32toh(data))); error = iwi_cmd(sc, IWI_CMD_SET_RTS_THRESHOLD, &data, sizeof data); if (error != 0) goto done; data = htole32(vap->iv_fragthreshold); DPRINTF(("Setting fragmentation threshold to %u\n", le32toh(data))); error = iwi_cmd(sc, IWI_CMD_SET_FRAG_THRESHOLD, &data, sizeof data); if (error != 0) goto done; /* the rate set has already been "negotiated" */ memset(&rs, 0, sizeof rs); rs.mode = mode; rs.type = IWI_RATESET_TYPE_NEGOTIATED; rs.nrates = ni->ni_rates.rs_nrates; if (rs.nrates > IWI_RATESET_SIZE) { DPRINTF(("Truncating negotiated rate set from %u\n", rs.nrates)); rs.nrates = IWI_RATESET_SIZE; } memcpy(rs.rates, ni->ni_rates.rs_rates, rs.nrates); DPRINTF(("Setting negotiated rates (%u)\n", rs.nrates)); error = iwi_cmd(sc, IWI_CMD_SET_RATES, &rs, sizeof rs); if (error != 0) goto done; memset(assoc, 0, sizeof *assoc); if ((vap->iv_flags & IEEE80211_F_WME) && ni->ni_ies.wme_ie != NULL) { /* NB: don't treat WME setup as failure */ if (iwi_wme_setparams(sc) == 0 && iwi_wme_setie(sc) == 0) assoc->policy |= htole16(IWI_POLICY_WME); /* XXX complain on failure? */ } if (vap->iv_appie_wpa != NULL) { struct ieee80211_appie *ie = vap->iv_appie_wpa; DPRINTF(("Setting optional IE (len=%u)\n", ie->ie_len)); error = iwi_cmd(sc, IWI_CMD_SET_OPTIE, ie->ie_data, ie->ie_len); if (error != 0) goto done; } error = iwi_set_sensitivity(sc, ic->ic_node_getrssi(ni)); if (error != 0) goto done; assoc->mode = mode; assoc->chan = ic->ic_curchan->ic_ieee; /* * NB: do not arrange for shared key auth w/o privacy * (i.e. a wep key); it causes a firmware error. */ if ((vap->iv_flags & IEEE80211_F_PRIVACY) && ni->ni_authmode == IEEE80211_AUTH_SHARED) { assoc->auth = IWI_AUTH_SHARED; /* * It's possible to have privacy marked but no default * key setup. This typically is due to a user app bug * but if we blindly grab the key the firmware will * barf so avoid it for now. */ if (vap->iv_def_txkey != IEEE80211_KEYIX_NONE) assoc->auth |= vap->iv_def_txkey << 4; error = iwi_setwepkeys(sc, vap); if (error != 0) goto done; } if (vap->iv_flags & IEEE80211_F_WPA) assoc->policy |= htole16(IWI_POLICY_WPA); if (vap->iv_opmode == IEEE80211_M_IBSS && ni->ni_tstamp.tsf == 0) assoc->type = IWI_HC_IBSS_START; else assoc->type = IWI_HC_ASSOC; memcpy(assoc->tstamp, ni->ni_tstamp.data, 8); if (vap->iv_opmode == IEEE80211_M_IBSS) capinfo = IEEE80211_CAPINFO_IBSS; else capinfo = IEEE80211_CAPINFO_ESS; if (vap->iv_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; assoc->capinfo = htole16(capinfo); assoc->lintval = htole16(ic->ic_lintval); assoc->intval = htole16(ni->ni_intval); IEEE80211_ADDR_COPY(assoc->bssid, ni->ni_bssid); if (vap->iv_opmode == IEEE80211_M_IBSS) IEEE80211_ADDR_COPY(assoc->dst, ifp->if_broadcastaddr); else IEEE80211_ADDR_COPY(assoc->dst, ni->ni_bssid); DPRINTF(("%s bssid %6D dst %6D channel %u policy 0x%x " "auth %u capinfo 0x%x lintval %u bintval %u\n", assoc->type == IWI_HC_IBSS_START ? "Start" : "Join", assoc->bssid, ":", assoc->dst, ":", assoc->chan, le16toh(assoc->policy), assoc->auth, le16toh(assoc->capinfo), le16toh(assoc->lintval), le16toh(assoc->intval))); error = iwi_cmd(sc, IWI_CMD_ASSOCIATE, assoc, sizeof *assoc); done: ieee80211_free_node(ni); if (error) IWI_STATE_END(sc, IWI_FW_ASSOCIATING); return (error); } static void iwi_disassoc(void *arg, int pending) { struct iwi_softc *sc = arg; IWI_LOCK_DECL; IWI_LOCK(sc); iwi_disassociate(sc, 0); IWI_UNLOCK(sc); } static int iwi_disassociate(struct iwi_softc *sc, int quiet) { struct iwi_associate *assoc = &sc->assoc; if ((sc->flags & IWI_FLAG_ASSOCIATED) == 0) { DPRINTF(("Not associated\n")); return (-1); } IWI_STATE_BEGIN(sc, IWI_FW_DISASSOCIATING); if (quiet) assoc->type = IWI_HC_DISASSOC_QUIET; else assoc->type = IWI_HC_DISASSOC; DPRINTF(("Trying to disassociate from %6D channel %u\n", assoc->bssid, ":", assoc->chan)); return iwi_cmd(sc, IWI_CMD_ASSOCIATE, assoc, sizeof *assoc); } /* * release dma resources for the firmware */ static void iwi_release_fw_dma(struct iwi_softc *sc) { if (sc->fw_flags & IWI_FW_HAVE_PHY) bus_dmamap_unload(sc->fw_dmat, sc->fw_map); if (sc->fw_flags & IWI_FW_HAVE_MAP) bus_dmamem_free(sc->fw_dmat, sc->fw_virtaddr, sc->fw_map); if (sc->fw_flags & IWI_FW_HAVE_DMAT) bus_dma_tag_destroy(sc->fw_dmat); sc->fw_flags = 0; sc->fw_dma_size = 0; sc->fw_dmat = NULL; sc->fw_map = NULL; sc->fw_physaddr = 0; sc->fw_virtaddr = NULL; } /* * allocate the dma descriptor for the firmware. * Return 0 on success, 1 on error. * Must be called unlocked, protected by IWI_FLAG_FW_LOADING. */ static int iwi_init_fw_dma(struct iwi_softc *sc, int size) { if (sc->fw_dma_size >= size) return 0; if (bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, size, 1, size, 0, NULL, NULL, &sc->fw_dmat) != 0) { device_printf(sc->sc_dev, "could not create firmware DMA tag\n"); goto error; } sc->fw_flags |= IWI_FW_HAVE_DMAT; if (bus_dmamem_alloc(sc->fw_dmat, &sc->fw_virtaddr, 0, &sc->fw_map) != 0) { device_printf(sc->sc_dev, "could not allocate firmware DMA memory\n"); goto error; } sc->fw_flags |= IWI_FW_HAVE_MAP; if (bus_dmamap_load(sc->fw_dmat, sc->fw_map, sc->fw_virtaddr, size, iwi_dma_map_addr, &sc->fw_physaddr, 0) != 0) { device_printf(sc->sc_dev, "could not load firmware DMA map\n"); goto error; } sc->fw_flags |= IWI_FW_HAVE_PHY; sc->fw_dma_size = size; return 0; error: iwi_release_fw_dma(sc); return 1; } static void iwi_init_locked(struct iwi_softc *sc) { struct iwi_rx_data *data; int i; IWI_LOCK_ASSERT(sc); if (sc->fw_state == IWI_FW_LOADING) { device_printf(sc->sc_dev, "%s: already loading\n", __func__); return; /* XXX: condvar? */ } iwi_stop_locked(sc); IWI_STATE_BEGIN(sc, IWI_FW_LOADING); if (iwi_reset(sc) != 0) { device_printf(sc->sc_dev, "could not reset adapter\n"); goto fail; } if (iwi_load_firmware(sc, &sc->fw_boot) != 0) { device_printf(sc->sc_dev, "could not load boot firmware %s\n", sc->fw_boot.name); goto fail; } if (iwi_load_ucode(sc, &sc->fw_uc) != 0) { device_printf(sc->sc_dev, "could not load microcode %s\n", sc->fw_uc.name); goto fail; } iwi_stop_master(sc); CSR_WRITE_4(sc, IWI_CSR_CMD_BASE, sc->cmdq.physaddr); CSR_WRITE_4(sc, IWI_CSR_CMD_SIZE, sc->cmdq.count); CSR_WRITE_4(sc, IWI_CSR_CMD_WIDX, sc->cmdq.cur); CSR_WRITE_4(sc, IWI_CSR_TX1_BASE, sc->txq[0].physaddr); CSR_WRITE_4(sc, IWI_CSR_TX1_SIZE, sc->txq[0].count); CSR_WRITE_4(sc, IWI_CSR_TX1_WIDX, sc->txq[0].cur); CSR_WRITE_4(sc, IWI_CSR_TX2_BASE, sc->txq[1].physaddr); CSR_WRITE_4(sc, IWI_CSR_TX2_SIZE, sc->txq[1].count); CSR_WRITE_4(sc, IWI_CSR_TX2_WIDX, sc->txq[1].cur); CSR_WRITE_4(sc, IWI_CSR_TX3_BASE, sc->txq[2].physaddr); CSR_WRITE_4(sc, IWI_CSR_TX3_SIZE, sc->txq[2].count); CSR_WRITE_4(sc, IWI_CSR_TX3_WIDX, sc->txq[2].cur); CSR_WRITE_4(sc, IWI_CSR_TX4_BASE, sc->txq[3].physaddr); CSR_WRITE_4(sc, IWI_CSR_TX4_SIZE, sc->txq[3].count); CSR_WRITE_4(sc, IWI_CSR_TX4_WIDX, sc->txq[3].cur); for (i = 0; i < sc->rxq.count; i++) { data = &sc->rxq.data[i]; CSR_WRITE_4(sc, data->reg, data->physaddr); } CSR_WRITE_4(sc, IWI_CSR_RX_WIDX, sc->rxq.count - 1); if (iwi_load_firmware(sc, &sc->fw_fw) != 0) { device_printf(sc->sc_dev, "could not load main firmware %s\n", sc->fw_fw.name); goto fail; } sc->flags |= IWI_FLAG_FW_INITED; IWI_STATE_END(sc, IWI_FW_LOADING); if (iwi_config(sc) != 0) { device_printf(sc->sc_dev, "unable to enable adapter\n"); goto fail2; } callout_reset(&sc->sc_wdtimer, hz, iwi_watchdog, sc); sc->sc_running = 1; return; fail: IWI_STATE_END(sc, IWI_FW_LOADING); fail2: iwi_stop_locked(sc); } static void iwi_init(void *priv) { struct iwi_softc *sc = priv; struct ieee80211com *ic = &sc->sc_ic; IWI_LOCK_DECL; IWI_LOCK(sc); iwi_init_locked(sc); IWI_UNLOCK(sc); if (sc->sc_running) ieee80211_start_all(ic); } static void iwi_stop_locked(void *priv) { struct iwi_softc *sc = priv; IWI_LOCK_ASSERT(sc); sc->sc_running = 0; if (sc->sc_softled) { callout_stop(&sc->sc_ledtimer); sc->sc_blinking = 0; } callout_stop(&sc->sc_wdtimer); callout_stop(&sc->sc_rftimer); iwi_stop_master(sc); CSR_WRITE_4(sc, IWI_CSR_RST, IWI_RST_SOFT_RESET); /* reset rings */ iwi_reset_cmd_ring(sc, &sc->cmdq); iwi_reset_tx_ring(sc, &sc->txq[0]); iwi_reset_tx_ring(sc, &sc->txq[1]); iwi_reset_tx_ring(sc, &sc->txq[2]); iwi_reset_tx_ring(sc, &sc->txq[3]); iwi_reset_rx_ring(sc, &sc->rxq); sc->sc_tx_timer = 0; sc->sc_state_timer = 0; sc->sc_busy_timer = 0; sc->flags &= ~(IWI_FLAG_BUSY | IWI_FLAG_ASSOCIATED); sc->fw_state = IWI_FW_IDLE; wakeup(sc); } static void iwi_stop(struct iwi_softc *sc) { IWI_LOCK_DECL; IWI_LOCK(sc); iwi_stop_locked(sc); IWI_UNLOCK(sc); } static void iwi_restart(void *arg, int npending) { struct iwi_softc *sc = arg; iwi_init(sc); } /* * Return whether or not the radio is enabled in hardware * (i.e. the rfkill switch is "off"). */ static int iwi_getrfkill(struct iwi_softc *sc) { return (CSR_READ_4(sc, IWI_CSR_IO) & IWI_IO_RADIO_ENABLED) == 0; } static void iwi_radio_on(void *arg, int pending) { struct iwi_softc *sc = arg; struct ieee80211com *ic = &sc->sc_ic; device_printf(sc->sc_dev, "radio turned on\n"); iwi_init(sc); ieee80211_notify_radio(ic, 1); } static void iwi_rfkill_poll(void *arg) { struct iwi_softc *sc = arg; IWI_LOCK_ASSERT(sc); /* * Check for a change in rfkill state. We get an * interrupt when a radio is disabled but not when * it is enabled so we must poll for the latter. */ if (!iwi_getrfkill(sc)) { ieee80211_runtask(&sc->sc_ic, &sc->sc_radiontask); return; } callout_reset(&sc->sc_rftimer, 2*hz, iwi_rfkill_poll, sc); } static void iwi_radio_off(void *arg, int pending) { struct iwi_softc *sc = arg; struct ieee80211com *ic = &sc->sc_ic; IWI_LOCK_DECL; device_printf(sc->sc_dev, "radio turned off\n"); ieee80211_notify_radio(ic, 0); IWI_LOCK(sc); iwi_stop_locked(sc); iwi_rfkill_poll(sc); IWI_UNLOCK(sc); } static int iwi_sysctl_stats(SYSCTL_HANDLER_ARGS) { struct iwi_softc *sc = arg1; uint32_t size, buf[128]; memset(buf, 0, sizeof buf); if (!(sc->flags & IWI_FLAG_FW_INITED)) return SYSCTL_OUT(req, buf, sizeof buf); size = min(CSR_READ_4(sc, IWI_CSR_TABLE0_SIZE), 128 - 1); CSR_READ_REGION_4(sc, IWI_CSR_TABLE0_BASE, &buf[1], size); return SYSCTL_OUT(req, buf, size); } static int iwi_sysctl_radio(SYSCTL_HANDLER_ARGS) { struct iwi_softc *sc = arg1; int val = !iwi_getrfkill(sc); return SYSCTL_OUT(req, &val, sizeof val); } /* * Add sysctl knobs. */ static void iwi_sysctlattach(struct iwi_softc *sc) { struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "radio", CTLTYPE_INT | CTLFLAG_RD, sc, 0, iwi_sysctl_radio, "I", "radio transmitter switch state (0=off, 1=on)"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "stats", CTLTYPE_OPAQUE | CTLFLAG_RD, sc, 0, iwi_sysctl_stats, "S", "statistics"); sc->bluetooth = 0; SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "bluetooth", CTLFLAG_RW, &sc->bluetooth, 0, "bluetooth coexistence"); sc->antenna = IWI_ANTENNA_AUTO; SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "antenna", CTLFLAG_RW, &sc->antenna, 0, "antenna (0=auto)"); } /* * LED support. * * Different cards have different capabilities. Some have three * led's while others have only one. The linux ipw driver defines * led's for link state (associated or not), band (11a, 11g, 11b), * and for link activity. We use one led and vary the blink rate * according to the tx/rx traffic a la the ath driver. */ static __inline uint32_t iwi_toggle_event(uint32_t r) { return r &~ (IWI_RST_STANDBY | IWI_RST_GATE_ODMA | IWI_RST_GATE_IDMA | IWI_RST_GATE_ADMA); } static uint32_t iwi_read_event(struct iwi_softc *sc) { return MEM_READ_4(sc, IWI_MEM_EEPROM_EVENT); } static void iwi_write_event(struct iwi_softc *sc, uint32_t v) { MEM_WRITE_4(sc, IWI_MEM_EEPROM_EVENT, v); } static void iwi_led_done(void *arg) { struct iwi_softc *sc = arg; sc->sc_blinking = 0; } /* * Turn the activity LED off: flip the pin and then set a timer so no * update will happen for the specified duration. */ static void iwi_led_off(void *arg) { struct iwi_softc *sc = arg; uint32_t v; v = iwi_read_event(sc); v &= ~sc->sc_ledpin; iwi_write_event(sc, iwi_toggle_event(v)); callout_reset(&sc->sc_ledtimer, sc->sc_ledoff, iwi_led_done, sc); } /* * Blink the LED according to the specified on/off times. */ static void iwi_led_blink(struct iwi_softc *sc, int on, int off) { uint32_t v; v = iwi_read_event(sc); v |= sc->sc_ledpin; iwi_write_event(sc, iwi_toggle_event(v)); sc->sc_blinking = 1; sc->sc_ledoff = off; callout_reset(&sc->sc_ledtimer, on, iwi_led_off, sc); } static void iwi_led_event(struct iwi_softc *sc, int event) { /* NB: on/off times from the Atheros NDIS driver, w/ permission */ static const struct { u_int rate; /* tx/rx iwi rate */ u_int16_t timeOn; /* LED on time (ms) */ u_int16_t timeOff; /* LED off time (ms) */ } blinkrates[] = { { IWI_RATE_OFDM54, 40, 10 }, { IWI_RATE_OFDM48, 44, 11 }, { IWI_RATE_OFDM36, 50, 13 }, { IWI_RATE_OFDM24, 57, 14 }, { IWI_RATE_OFDM18, 67, 16 }, { IWI_RATE_OFDM12, 80, 20 }, { IWI_RATE_DS11, 100, 25 }, { IWI_RATE_OFDM9, 133, 34 }, { IWI_RATE_OFDM6, 160, 40 }, { IWI_RATE_DS5, 200, 50 }, { 6, 240, 58 }, /* XXX 3Mb/s if it existed */ { IWI_RATE_DS2, 267, 66 }, { IWI_RATE_DS1, 400, 100 }, { 0, 500, 130 }, /* unknown rate/polling */ }; uint32_t txrate; int j = 0; /* XXX silence compiler */ sc->sc_ledevent = ticks; /* time of last event */ if (sc->sc_blinking) /* don't interrupt active blink */ return; switch (event) { case IWI_LED_POLL: j = nitems(blinkrates)-1; break; case IWI_LED_TX: /* read current transmission rate from adapter */ txrate = CSR_READ_4(sc, IWI_CSR_CURRENT_TX_RATE); if (blinkrates[sc->sc_txrix].rate != txrate) { for (j = 0; j < nitems(blinkrates)-1; j++) if (blinkrates[j].rate == txrate) break; sc->sc_txrix = j; } else j = sc->sc_txrix; break; case IWI_LED_RX: if (blinkrates[sc->sc_rxrix].rate != sc->sc_rxrate) { for (j = 0; j < nitems(blinkrates)-1; j++) if (blinkrates[j].rate == sc->sc_rxrate) break; sc->sc_rxrix = j; } else j = sc->sc_rxrix; break; } /* XXX beware of overflow */ iwi_led_blink(sc, (blinkrates[j].timeOn * hz) / 1000, (blinkrates[j].timeOff * hz) / 1000); } static int iwi_sysctl_softled(SYSCTL_HANDLER_ARGS) { struct iwi_softc *sc = arg1; int softled = sc->sc_softled; int error; error = sysctl_handle_int(oidp, &softled, 0, req); if (error || !req->newptr) return error; softled = (softled != 0); if (softled != sc->sc_softled) { if (softled) { uint32_t v = iwi_read_event(sc); v &= ~sc->sc_ledpin; iwi_write_event(sc, iwi_toggle_event(v)); } sc->sc_softled = softled; } return 0; } static void iwi_ledattach(struct iwi_softc *sc) { struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); sc->sc_blinking = 0; sc->sc_ledstate = 1; sc->sc_ledidle = (2700*hz)/1000; /* 2.7sec */ callout_init_mtx(&sc->sc_ledtimer, &sc->sc_mtx, 0); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "softled", CTLTYPE_INT | CTLFLAG_RW, sc, 0, iwi_sysctl_softled, "I", "enable/disable software LED support"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "ledpin", CTLFLAG_RW, &sc->sc_ledpin, 0, "pin setting to turn activity LED on"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "ledidle", CTLFLAG_RW, &sc->sc_ledidle, 0, "idle time for inactivity LED (ticks)"); /* XXX for debugging */ SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "nictype", CTLFLAG_RD, &sc->sc_nictype, 0, "NIC type from EEPROM"); sc->sc_ledpin = IWI_RST_LED_ACTIVITY; sc->sc_softled = 1; sc->sc_nictype = (iwi_read_prom_word(sc, IWI_EEPROM_NIC) >> 8) & 0xff; if (sc->sc_nictype == 1) { /* * NB: led's are reversed. */ sc->sc_ledpin = IWI_RST_LED_ASSOCIATED; } } static void iwi_scan_start(struct ieee80211com *ic) { /* ignore */ } static void iwi_set_channel(struct ieee80211com *ic) { struct iwi_softc *sc = ic->ic_softc; if (sc->fw_state == IWI_FW_IDLE) iwi_setcurchan(sc, ic->ic_curchan->ic_ieee); } static void iwi_scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell) { struct ieee80211vap *vap = ss->ss_vap; struct iwi_softc *sc = vap->iv_ic->ic_softc; IWI_LOCK_DECL; IWI_LOCK(sc); if (iwi_scanchan(sc, maxdwell, 0)) ieee80211_cancel_scan(vap); IWI_UNLOCK(sc); } static void iwi_scan_mindwell(struct ieee80211_scan_state *ss) { /* NB: don't try to abort scan; wait for firmware to finish */ } static void iwi_scan_end(struct ieee80211com *ic) { struct iwi_softc *sc = ic->ic_softc; IWI_LOCK_DECL; IWI_LOCK(sc); sc->flags &= ~IWI_FLAG_CHANNEL_SCAN; /* NB: make sure we're still scanning */ if (sc->fw_state == IWI_FW_SCANNING) iwi_cmd(sc, IWI_CMD_ABORT_SCAN, NULL, 0); IWI_UNLOCK(sc); } static void iwi_collect_bands(struct ieee80211com *ic, uint8_t bands[], size_t bands_sz) { struct iwi_softc *sc = ic->ic_softc; device_t dev = sc->sc_dev; memset(bands, 0, bands_sz); setbit(bands, IEEE80211_MODE_11B); setbit(bands, IEEE80211_MODE_11G); if (pci_get_device(dev) >= 0x4223) setbit(bands, IEEE80211_MODE_11A); } static void iwi_getradiocaps(struct ieee80211com *ic, int maxchans, int *nchans, struct ieee80211_channel chans[]) { uint8_t bands[IEEE80211_MODE_BYTES]; iwi_collect_bands(ic, bands, sizeof(bands)); *nchans = 0; if (isset(bands, IEEE80211_MODE_11B) || isset(bands, IEEE80211_MODE_11G)) ieee80211_add_channel_list_2ghz(chans, maxchans, nchans, def_chan_2ghz, nitems(def_chan_2ghz), bands, 0); if (isset(bands, IEEE80211_MODE_11A)) { ieee80211_add_channel_list_5ghz(chans, maxchans, nchans, def_chan_5ghz_band1, nitems(def_chan_5ghz_band1), bands, 0); ieee80211_add_channel_list_5ghz(chans, maxchans, nchans, def_chan_5ghz_band2, nitems(def_chan_5ghz_band2), bands, 0); ieee80211_add_channel_list_5ghz(chans, maxchans, nchans, def_chan_5ghz_band3, nitems(def_chan_5ghz_band3), bands, 0); } } Index: stable/11/sys/dev/ral/rt2661.c =================================================================== --- stable/11/sys/dev/ral/rt2661.c (revision 314221) +++ stable/11/sys/dev/ral/rt2661.c (revision 314222) @@ -1,2798 +1,2798 @@ /* $FreeBSD$ */ /*- * Copyright (c) 2006 * Damien Bergamini * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include __FBSDID("$FreeBSD$"); /*- * Ralink Technology RT2561, RT2561S and RT2661 chipset driver * http://www.ralinktech.com/ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define RAL_DEBUG #ifdef RAL_DEBUG #define DPRINTF(sc, fmt, ...) do { \ if (sc->sc_debug > 0) \ printf(fmt, __VA_ARGS__); \ } while (0) #define DPRINTFN(sc, n, fmt, ...) do { \ if (sc->sc_debug >= (n)) \ printf(fmt, __VA_ARGS__); \ } while (0) #else #define DPRINTF(sc, fmt, ...) #define DPRINTFN(sc, n, fmt, ...) #endif static struct ieee80211vap *rt2661_vap_create(struct ieee80211com *, const char [IFNAMSIZ], int, enum ieee80211_opmode, int, const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN]); static void rt2661_vap_delete(struct ieee80211vap *); static void rt2661_dma_map_addr(void *, bus_dma_segment_t *, int, int); static int rt2661_alloc_tx_ring(struct rt2661_softc *, struct rt2661_tx_ring *, int); static void rt2661_reset_tx_ring(struct rt2661_softc *, struct rt2661_tx_ring *); static void rt2661_free_tx_ring(struct rt2661_softc *, struct rt2661_tx_ring *); static int rt2661_alloc_rx_ring(struct rt2661_softc *, struct rt2661_rx_ring *, int); static void rt2661_reset_rx_ring(struct rt2661_softc *, struct rt2661_rx_ring *); static void rt2661_free_rx_ring(struct rt2661_softc *, struct rt2661_rx_ring *); static int rt2661_newstate(struct ieee80211vap *, enum ieee80211_state, int); static uint16_t rt2661_eeprom_read(struct rt2661_softc *, uint8_t); static void rt2661_rx_intr(struct rt2661_softc *); static void rt2661_tx_intr(struct rt2661_softc *); static void rt2661_tx_dma_intr(struct rt2661_softc *, struct rt2661_tx_ring *); static void rt2661_mcu_beacon_expire(struct rt2661_softc *); static void rt2661_mcu_wakeup(struct rt2661_softc *); static void rt2661_mcu_cmd_intr(struct rt2661_softc *); static void rt2661_scan_start(struct ieee80211com *); static void rt2661_scan_end(struct ieee80211com *); static void rt2661_getradiocaps(struct ieee80211com *, int, int *, struct ieee80211_channel[]); static void rt2661_set_channel(struct ieee80211com *); static void rt2661_setup_tx_desc(struct rt2661_softc *, struct rt2661_tx_desc *, uint32_t, uint16_t, int, int, const bus_dma_segment_t *, int, int); static int rt2661_tx_data(struct rt2661_softc *, struct mbuf *, struct ieee80211_node *, int); static int rt2661_tx_mgt(struct rt2661_softc *, struct mbuf *, struct ieee80211_node *); static int rt2661_transmit(struct ieee80211com *, struct mbuf *); static void rt2661_start(struct rt2661_softc *); static int rt2661_raw_xmit(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); static void rt2661_watchdog(void *); static void rt2661_parent(struct ieee80211com *); static void rt2661_bbp_write(struct rt2661_softc *, uint8_t, uint8_t); static uint8_t rt2661_bbp_read(struct rt2661_softc *, uint8_t); static void rt2661_rf_write(struct rt2661_softc *, uint8_t, uint32_t); static int rt2661_tx_cmd(struct rt2661_softc *, uint8_t, uint16_t); static void rt2661_select_antenna(struct rt2661_softc *); static void rt2661_enable_mrr(struct rt2661_softc *); static void rt2661_set_txpreamble(struct rt2661_softc *); static void rt2661_set_basicrates(struct rt2661_softc *, const struct ieee80211_rateset *); static void rt2661_select_band(struct rt2661_softc *, struct ieee80211_channel *); static void rt2661_set_chan(struct rt2661_softc *, struct ieee80211_channel *); static void rt2661_set_bssid(struct rt2661_softc *, const uint8_t *); static void rt2661_set_macaddr(struct rt2661_softc *, const uint8_t *); static void rt2661_update_promisc(struct ieee80211com *); static int rt2661_wme_update(struct ieee80211com *) __unused; static void rt2661_update_slot(struct ieee80211com *); static const char *rt2661_get_rf(int); static void rt2661_read_eeprom(struct rt2661_softc *, uint8_t macaddr[IEEE80211_ADDR_LEN]); static int rt2661_bbp_init(struct rt2661_softc *); static void rt2661_init_locked(struct rt2661_softc *); static void rt2661_init(void *); static void rt2661_stop_locked(struct rt2661_softc *); static void rt2661_stop(void *); static int rt2661_load_microcode(struct rt2661_softc *); #ifdef notyet static void rt2661_rx_tune(struct rt2661_softc *); static void rt2661_radar_start(struct rt2661_softc *); static int rt2661_radar_stop(struct rt2661_softc *); #endif static int rt2661_prepare_beacon(struct rt2661_softc *, struct ieee80211vap *); static void rt2661_enable_tsf_sync(struct rt2661_softc *); static void rt2661_enable_tsf(struct rt2661_softc *); static int rt2661_get_rssi(struct rt2661_softc *, uint8_t); static const struct { uint32_t reg; uint32_t val; } rt2661_def_mac[] = { RT2661_DEF_MAC }; static const struct { uint8_t reg; uint8_t val; } rt2661_def_bbp[] = { RT2661_DEF_BBP }; static const struct rfprog { uint8_t chan; uint32_t r1, r2, r3, r4; } rt2661_rf5225_1[] = { RT2661_RF5225_1 }, rt2661_rf5225_2[] = { RT2661_RF5225_2 }; static const uint8_t rt2661_chan_2ghz[] = { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 }; static const uint8_t rt2661_chan_5ghz[] = { 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 }; int rt2661_attach(device_t dev, int id) { struct rt2661_softc *sc = device_get_softc(dev); struct ieee80211com *ic = &sc->sc_ic; uint32_t val; int error, ac, ntries; sc->sc_id = id; sc->sc_dev = dev; mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, MTX_DEF | MTX_RECURSE); callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0); mbufq_init(&sc->sc_snd, ifqmaxlen); /* wait for NIC to initialize */ for (ntries = 0; ntries < 1000; ntries++) { if ((val = RAL_READ(sc, RT2661_MAC_CSR0)) != 0) break; DELAY(1000); } if (ntries == 1000) { device_printf(sc->sc_dev, "timeout waiting for NIC to initialize\n"); error = EIO; goto fail1; } /* retrieve RF rev. no and various other things from EEPROM */ rt2661_read_eeprom(sc, ic->ic_macaddr); device_printf(dev, "MAC/BBP RT%X, RF %s\n", val, rt2661_get_rf(sc->rf_rev)); /* * Allocate Tx and Rx rings. */ for (ac = 0; ac < 4; ac++) { error = rt2661_alloc_tx_ring(sc, &sc->txq[ac], RT2661_TX_RING_COUNT); if (error != 0) { device_printf(sc->sc_dev, "could not allocate Tx ring %d\n", ac); goto fail2; } } error = rt2661_alloc_tx_ring(sc, &sc->mgtq, RT2661_MGT_RING_COUNT); if (error != 0) { device_printf(sc->sc_dev, "could not allocate Mgt ring\n"); goto fail2; } error = rt2661_alloc_rx_ring(sc, &sc->rxq, RT2661_RX_RING_COUNT); if (error != 0) { device_printf(sc->sc_dev, "could not allocate Rx ring\n"); goto fail3; } ic->ic_softc = sc; ic->ic_name = device_get_nameunit(dev); ic->ic_opmode = IEEE80211_M_STA; ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ /* set device capabilities */ ic->ic_caps = IEEE80211_C_STA /* station mode */ | IEEE80211_C_IBSS /* ibss, nee adhoc, mode */ | IEEE80211_C_HOSTAP /* hostap mode */ | IEEE80211_C_MONITOR /* monitor mode */ | IEEE80211_C_AHDEMO /* adhoc demo mode */ | IEEE80211_C_WDS /* 4-address traffic works */ | IEEE80211_C_MBSS /* mesh point link mode */ | IEEE80211_C_SHPREAMBLE /* short preamble supported */ | IEEE80211_C_SHSLOT /* short slot time supported */ | IEEE80211_C_WPA /* capable of WPA1+WPA2 */ | IEEE80211_C_BGSCAN /* capable of bg scanning */ #ifdef notyet | IEEE80211_C_TXFRAG /* handle tx frags */ | IEEE80211_C_WME /* 802.11e */ #endif ; rt2661_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans, ic->ic_channels); ieee80211_ifattach(ic); #if 0 ic->ic_wme.wme_update = rt2661_wme_update; #endif ic->ic_scan_start = rt2661_scan_start; ic->ic_scan_end = rt2661_scan_end; ic->ic_getradiocaps = rt2661_getradiocaps; ic->ic_set_channel = rt2661_set_channel; ic->ic_updateslot = rt2661_update_slot; ic->ic_update_promisc = rt2661_update_promisc; ic->ic_raw_xmit = rt2661_raw_xmit; ic->ic_transmit = rt2661_transmit; ic->ic_parent = rt2661_parent; ic->ic_vap_create = rt2661_vap_create; ic->ic_vap_delete = rt2661_vap_delete; ieee80211_radiotap_attach(ic, &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), RT2661_TX_RADIOTAP_PRESENT, &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), RT2661_RX_RADIOTAP_PRESENT); #ifdef RAL_DEBUG SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, "debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs"); #endif if (bootverbose) ieee80211_announce(ic); return 0; fail3: rt2661_free_tx_ring(sc, &sc->mgtq); fail2: while (--ac >= 0) rt2661_free_tx_ring(sc, &sc->txq[ac]); fail1: mtx_destroy(&sc->sc_mtx); return error; } int rt2661_detach(void *xsc) { struct rt2661_softc *sc = xsc; struct ieee80211com *ic = &sc->sc_ic; RAL_LOCK(sc); rt2661_stop_locked(sc); RAL_UNLOCK(sc); ieee80211_ifdetach(ic); mbufq_drain(&sc->sc_snd); rt2661_free_tx_ring(sc, &sc->txq[0]); rt2661_free_tx_ring(sc, &sc->txq[1]); rt2661_free_tx_ring(sc, &sc->txq[2]); rt2661_free_tx_ring(sc, &sc->txq[3]); rt2661_free_tx_ring(sc, &sc->mgtq); rt2661_free_rx_ring(sc, &sc->rxq); mtx_destroy(&sc->sc_mtx); return 0; } static struct ieee80211vap * rt2661_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, enum ieee80211_opmode opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t mac[IEEE80211_ADDR_LEN]) { struct rt2661_softc *sc = ic->ic_softc; struct rt2661_vap *rvp; struct ieee80211vap *vap; switch (opmode) { case IEEE80211_M_STA: case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: case IEEE80211_M_MONITOR: case IEEE80211_M_HOSTAP: case IEEE80211_M_MBSS: /* XXXRP: TBD */ if (!TAILQ_EMPTY(&ic->ic_vaps)) { device_printf(sc->sc_dev, "only 1 vap supported\n"); return NULL; } if (opmode == IEEE80211_M_STA) flags |= IEEE80211_CLONE_NOBEACONS; break; case IEEE80211_M_WDS: if (TAILQ_EMPTY(&ic->ic_vaps) || ic->ic_opmode != IEEE80211_M_HOSTAP) { device_printf(sc->sc_dev, "wds only supported in ap mode\n"); return NULL; } /* * Silently remove any request for a unique * bssid; WDS vap's always share the local * mac address. */ flags &= ~IEEE80211_CLONE_BSSID; break; default: device_printf(sc->sc_dev, "unknown opmode %d\n", opmode); return NULL; } rvp = malloc(sizeof(struct rt2661_vap), M_80211_VAP, M_WAITOK | M_ZERO); vap = &rvp->ral_vap; ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid); /* override state transition machine */ rvp->ral_newstate = vap->iv_newstate; vap->iv_newstate = rt2661_newstate; #if 0 vap->iv_update_beacon = rt2661_beacon_update; #endif ieee80211_ratectl_init(vap); /* complete setup */ ieee80211_vap_attach(vap, ieee80211_media_change, ieee80211_media_status, mac); if (TAILQ_FIRST(&ic->ic_vaps) == vap) ic->ic_opmode = opmode; return vap; } static void rt2661_vap_delete(struct ieee80211vap *vap) { struct rt2661_vap *rvp = RT2661_VAP(vap); ieee80211_ratectl_deinit(vap); ieee80211_vap_detach(vap); free(rvp, M_80211_VAP); } void rt2661_shutdown(void *xsc) { struct rt2661_softc *sc = xsc; rt2661_stop(sc); } void rt2661_suspend(void *xsc) { struct rt2661_softc *sc = xsc; rt2661_stop(sc); } void rt2661_resume(void *xsc) { struct rt2661_softc *sc = xsc; if (sc->sc_ic.ic_nrunning > 0) rt2661_init(sc); } static void rt2661_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) { if (error != 0) return; KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); *(bus_addr_t *)arg = segs[0].ds_addr; } static int rt2661_alloc_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring, int count) { int i, error; ring->count = count; ring->queued = 0; ring->cur = ring->next = ring->stat = 0; error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, count * RT2661_TX_DESC_SIZE, 1, count * RT2661_TX_DESC_SIZE, 0, NULL, NULL, &ring->desc_dmat); if (error != 0) { device_printf(sc->sc_dev, "could not create desc DMA tag\n"); goto fail; } error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); if (error != 0) { device_printf(sc->sc_dev, "could not allocate DMA memory\n"); goto fail; } error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, count * RT2661_TX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 0); if (error != 0) { device_printf(sc->sc_dev, "could not load desc DMA map\n"); goto fail; } ring->data = malloc(count * sizeof (struct rt2661_tx_data), M_DEVBUF, M_NOWAIT | M_ZERO); if (ring->data == NULL) { device_printf(sc->sc_dev, "could not allocate soft data\n"); error = ENOMEM; goto fail; } error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, RT2661_MAX_SCATTER, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); if (error != 0) { device_printf(sc->sc_dev, "could not create data DMA tag\n"); goto fail; } for (i = 0; i < count; i++) { error = bus_dmamap_create(ring->data_dmat, 0, &ring->data[i].map); if (error != 0) { device_printf(sc->sc_dev, "could not create DMA map\n"); goto fail; } } return 0; fail: rt2661_free_tx_ring(sc, ring); return error; } static void rt2661_reset_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) { struct rt2661_tx_desc *desc; struct rt2661_tx_data *data; int i; for (i = 0; i < ring->count; i++) { desc = &ring->desc[i]; data = &ring->data[i]; if (data->m != NULL) { bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->data_dmat, data->map); m_freem(data->m); data->m = NULL; } if (data->ni != NULL) { ieee80211_free_node(data->ni); data->ni = NULL; } desc->flags = 0; } bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); ring->queued = 0; ring->cur = ring->next = ring->stat = 0; } static void rt2661_free_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring) { struct rt2661_tx_data *data; int i; if (ring->desc != NULL) { bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->desc_dmat, ring->desc_map); bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); } if (ring->desc_dmat != NULL) bus_dma_tag_destroy(ring->desc_dmat); if (ring->data != NULL) { for (i = 0; i < ring->count; i++) { data = &ring->data[i]; if (data->m != NULL) { bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->data_dmat, data->map); m_freem(data->m); } if (data->ni != NULL) ieee80211_free_node(data->ni); if (data->map != NULL) bus_dmamap_destroy(ring->data_dmat, data->map); } free(ring->data, M_DEVBUF); } if (ring->data_dmat != NULL) bus_dma_tag_destroy(ring->data_dmat); } static int rt2661_alloc_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring, int count) { struct rt2661_rx_desc *desc; struct rt2661_rx_data *data; bus_addr_t physaddr; int i, error; ring->count = count; ring->cur = ring->next = 0; error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, count * RT2661_RX_DESC_SIZE, 1, count * RT2661_RX_DESC_SIZE, 0, NULL, NULL, &ring->desc_dmat); if (error != 0) { device_printf(sc->sc_dev, "could not create desc DMA tag\n"); goto fail; } error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc, BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map); if (error != 0) { device_printf(sc->sc_dev, "could not allocate DMA memory\n"); goto fail; } error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc, count * RT2661_RX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr, 0); if (error != 0) { device_printf(sc->sc_dev, "could not load desc DMA map\n"); goto fail; } ring->data = malloc(count * sizeof (struct rt2661_rx_data), M_DEVBUF, M_NOWAIT | M_ZERO); if (ring->data == NULL) { device_printf(sc->sc_dev, "could not allocate soft data\n"); error = ENOMEM; goto fail; } /* * Pre-allocate Rx buffers and populate Rx ring. */ error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, 1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat); if (error != 0) { device_printf(sc->sc_dev, "could not create data DMA tag\n"); goto fail; } for (i = 0; i < count; i++) { desc = &sc->rxq.desc[i]; data = &sc->rxq.data[i]; error = bus_dmamap_create(ring->data_dmat, 0, &data->map); if (error != 0) { device_printf(sc->sc_dev, "could not create DMA map\n"); goto fail; } data->m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); if (data->m == NULL) { device_printf(sc->sc_dev, "could not allocate rx mbuf\n"); error = ENOMEM; goto fail; } error = bus_dmamap_load(ring->data_dmat, data->map, mtod(data->m, void *), MCLBYTES, rt2661_dma_map_addr, &physaddr, 0); if (error != 0) { device_printf(sc->sc_dev, "could not load rx buf DMA map"); goto fail; } desc->flags = htole32(RT2661_RX_BUSY); desc->physaddr = htole32(physaddr); } bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); return 0; fail: rt2661_free_rx_ring(sc, ring); return error; } static void rt2661_reset_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) { int i; for (i = 0; i < ring->count; i++) ring->desc[i].flags = htole32(RT2661_RX_BUSY); bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE); ring->cur = ring->next = 0; } static void rt2661_free_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring) { struct rt2661_rx_data *data; int i; if (ring->desc != NULL) { bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->desc_dmat, ring->desc_map); bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map); } if (ring->desc_dmat != NULL) bus_dma_tag_destroy(ring->desc_dmat); if (ring->data != NULL) { for (i = 0; i < ring->count; i++) { data = &ring->data[i]; if (data->m != NULL) { bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(ring->data_dmat, data->map); m_freem(data->m); } if (data->map != NULL) bus_dmamap_destroy(ring->data_dmat, data->map); } free(ring->data, M_DEVBUF); } if (ring->data_dmat != NULL) bus_dma_tag_destroy(ring->data_dmat); } static int rt2661_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct rt2661_vap *rvp = RT2661_VAP(vap); struct ieee80211com *ic = vap->iv_ic; struct rt2661_softc *sc = ic->ic_softc; int error; if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) { uint32_t tmp; /* abort TSF synchronization */ tmp = RAL_READ(sc, RT2661_TXRX_CSR9); RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0x00ffffff); } error = rvp->ral_newstate(vap, nstate, arg); if (error == 0 && nstate == IEEE80211_S_RUN) { struct ieee80211_node *ni = vap->iv_bss; if (vap->iv_opmode != IEEE80211_M_MONITOR) { rt2661_enable_mrr(sc); rt2661_set_txpreamble(sc); rt2661_set_basicrates(sc, &ni->ni_rates); rt2661_set_bssid(sc, ni->ni_bssid); } if (vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_IBSS || vap->iv_opmode == IEEE80211_M_MBSS) { error = rt2661_prepare_beacon(sc, vap); if (error != 0) return error; } if (vap->iv_opmode != IEEE80211_M_MONITOR) rt2661_enable_tsf_sync(sc); else rt2661_enable_tsf(sc); } return error; } /* * Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or * 93C66). */ static uint16_t rt2661_eeprom_read(struct rt2661_softc *sc, uint8_t addr) { uint32_t tmp; uint16_t val; int n; /* clock C once before the first command */ RT2661_EEPROM_CTL(sc, 0); RT2661_EEPROM_CTL(sc, RT2661_S); RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); RT2661_EEPROM_CTL(sc, RT2661_S); /* write start bit (1) */ RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); /* write READ opcode (10) */ RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D); RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C); RT2661_EEPROM_CTL(sc, RT2661_S); RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); /* write address (A5-A0 or A7-A0) */ n = (RAL_READ(sc, RT2661_E2PROM_CSR) & RT2661_93C46) ? 5 : 7; for (; n >= 0; n--) { RT2661_EEPROM_CTL(sc, RT2661_S | (((addr >> n) & 1) << RT2661_SHIFT_D)); RT2661_EEPROM_CTL(sc, RT2661_S | (((addr >> n) & 1) << RT2661_SHIFT_D) | RT2661_C); } RT2661_EEPROM_CTL(sc, RT2661_S); /* read data Q15-Q0 */ val = 0; for (n = 15; n >= 0; n--) { RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C); tmp = RAL_READ(sc, RT2661_E2PROM_CSR); val |= ((tmp & RT2661_Q) >> RT2661_SHIFT_Q) << n; RT2661_EEPROM_CTL(sc, RT2661_S); } RT2661_EEPROM_CTL(sc, 0); /* clear Chip Select and clock C */ RT2661_EEPROM_CTL(sc, RT2661_S); RT2661_EEPROM_CTL(sc, 0); RT2661_EEPROM_CTL(sc, RT2661_C); return val; } static void rt2661_tx_intr(struct rt2661_softc *sc) { struct rt2661_tx_ring *txq; struct rt2661_tx_data *data; uint32_t val; int error, qid, retrycnt; struct ieee80211vap *vap; for (;;) { struct ieee80211_node *ni; struct mbuf *m; val = RAL_READ(sc, RT2661_STA_CSR4); if (!(val & RT2661_TX_STAT_VALID)) break; /* retrieve the queue in which this frame was sent */ qid = RT2661_TX_QID(val); txq = (qid <= 3) ? &sc->txq[qid] : &sc->mgtq; /* retrieve rate control algorithm context */ data = &txq->data[txq->stat]; m = data->m; data->m = NULL; ni = data->ni; data->ni = NULL; /* if no frame has been sent, ignore */ if (ni == NULL) continue; else vap = ni->ni_vap; switch (RT2661_TX_RESULT(val)) { case RT2661_TX_SUCCESS: retrycnt = RT2661_TX_RETRYCNT(val); DPRINTFN(sc, 10, "data frame sent successfully after " "%d retries\n", retrycnt); if (data->rix != IEEE80211_FIXED_RATE_NONE) ieee80211_ratectl_tx_complete(vap, ni, IEEE80211_RATECTL_TX_SUCCESS, &retrycnt, NULL); error = 0; break; case RT2661_TX_RETRY_FAIL: retrycnt = RT2661_TX_RETRYCNT(val); DPRINTFN(sc, 9, "%s\n", "sending data frame failed (too much retries)"); if (data->rix != IEEE80211_FIXED_RATE_NONE) ieee80211_ratectl_tx_complete(vap, ni, IEEE80211_RATECTL_TX_FAILURE, &retrycnt, NULL); error = 1; break; default: /* other failure */ device_printf(sc->sc_dev, "sending data frame failed 0x%08x\n", val); error = 1; } DPRINTFN(sc, 15, "tx done q=%d idx=%u\n", qid, txq->stat); txq->queued--; if (++txq->stat >= txq->count) /* faster than % count */ txq->stat = 0; ieee80211_tx_complete(ni, m, error); } sc->sc_tx_timer = 0; rt2661_start(sc); } static void rt2661_tx_dma_intr(struct rt2661_softc *sc, struct rt2661_tx_ring *txq) { struct rt2661_tx_desc *desc; struct rt2661_tx_data *data; bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_POSTREAD); for (;;) { desc = &txq->desc[txq->next]; data = &txq->data[txq->next]; if ((le32toh(desc->flags) & RT2661_TX_BUSY) || !(le32toh(desc->flags) & RT2661_TX_VALID)) break; bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(txq->data_dmat, data->map); /* descriptor is no longer valid */ desc->flags &= ~htole32(RT2661_TX_VALID); DPRINTFN(sc, 15, "tx dma done q=%p idx=%u\n", txq, txq->next); if (++txq->next >= txq->count) /* faster than % count */ txq->next = 0; } bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); } static void rt2661_rx_intr(struct rt2661_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct rt2661_rx_desc *desc; struct rt2661_rx_data *data; bus_addr_t physaddr; struct ieee80211_frame *wh; struct ieee80211_node *ni; struct mbuf *mnew, *m; int error; bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, BUS_DMASYNC_POSTREAD); for (;;) { int8_t rssi, nf; desc = &sc->rxq.desc[sc->rxq.cur]; data = &sc->rxq.data[sc->rxq.cur]; if (le32toh(desc->flags) & RT2661_RX_BUSY) break; if ((le32toh(desc->flags) & RT2661_RX_PHY_ERROR) || (le32toh(desc->flags) & RT2661_RX_CRC_ERROR)) { /* * This should not happen since we did not request * to receive those frames when we filled TXRX_CSR0. */ DPRINTFN(sc, 5, "PHY or CRC error flags 0x%08x\n", le32toh(desc->flags)); counter_u64_add(ic->ic_ierrors, 1); goto skip; } if ((le32toh(desc->flags) & RT2661_RX_CIPHER_MASK) != 0) { counter_u64_add(ic->ic_ierrors, 1); goto skip; } /* * Try to allocate a new mbuf for this ring element and load it * before processing the current mbuf. If the ring element * cannot be loaded, drop the received packet and reuse the old * mbuf. In the unlikely case that the old mbuf can't be * reloaded either, explicitly panic. */ mnew = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); if (mnew == NULL) { counter_u64_add(ic->ic_ierrors, 1); goto skip; } bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->rxq.data_dmat, data->map); error = bus_dmamap_load(sc->rxq.data_dmat, data->map, mtod(mnew, void *), MCLBYTES, rt2661_dma_map_addr, &physaddr, 0); if (error != 0) { m_freem(mnew); /* try to reload the old mbuf */ error = bus_dmamap_load(sc->rxq.data_dmat, data->map, mtod(data->m, void *), MCLBYTES, rt2661_dma_map_addr, &physaddr, 0); if (error != 0) { /* very unlikely that it will fail... */ panic("%s: could not load old rx mbuf", device_get_name(sc->sc_dev)); } counter_u64_add(ic->ic_ierrors, 1); goto skip; } /* * New mbuf successfully loaded, update Rx ring and continue * processing. */ m = data->m; data->m = mnew; desc->physaddr = htole32(physaddr); /* finalize mbuf */ m->m_pkthdr.len = m->m_len = (le32toh(desc->flags) >> 16) & 0xfff; rssi = rt2661_get_rssi(sc, desc->rssi); /* Error happened during RSSI conversion. */ if (rssi < 0) rssi = -30; /* XXX ignored by net80211 */ nf = RT2661_NOISE_FLOOR; if (ieee80211_radiotap_active(ic)) { struct rt2661_rx_radiotap_header *tap = &sc->sc_rxtap; uint32_t tsf_lo, tsf_hi; /* get timestamp (low and high 32 bits) */ tsf_hi = RAL_READ(sc, RT2661_TXRX_CSR13); tsf_lo = RAL_READ(sc, RT2661_TXRX_CSR12); tap->wr_tsf = htole64(((uint64_t)tsf_hi << 32) | tsf_lo); tap->wr_flags = 0; tap->wr_rate = ieee80211_plcp2rate(desc->rate, (desc->flags & htole32(RT2661_RX_OFDM)) ? IEEE80211_T_OFDM : IEEE80211_T_CCK); tap->wr_antsignal = nf + rssi; tap->wr_antnoise = nf; } sc->sc_flags |= RAL_INPUT_RUNNING; RAL_UNLOCK(sc); wh = mtod(m, struct ieee80211_frame *); /* send the frame to the 802.11 layer */ ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)wh); if (ni != NULL) { (void) ieee80211_input(ni, m, rssi, nf); ieee80211_free_node(ni); } else (void) ieee80211_input_all(ic, m, rssi, nf); RAL_LOCK(sc); sc->sc_flags &= ~RAL_INPUT_RUNNING; skip: desc->flags |= htole32(RT2661_RX_BUSY); DPRINTFN(sc, 15, "rx intr idx=%u\n", sc->rxq.cur); sc->rxq.cur = (sc->rxq.cur + 1) % RT2661_RX_RING_COUNT; } bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map, BUS_DMASYNC_PREWRITE); } /* ARGSUSED */ static void rt2661_mcu_beacon_expire(struct rt2661_softc *sc) { /* do nothing */ } static void rt2661_mcu_wakeup(struct rt2661_softc *sc) { RAL_WRITE(sc, RT2661_MAC_CSR11, 5 << 16); RAL_WRITE(sc, RT2661_SOFT_RESET_CSR, 0x7); RAL_WRITE(sc, RT2661_IO_CNTL_CSR, 0x18); RAL_WRITE(sc, RT2661_PCI_USEC_CSR, 0x20); /* send wakeup command to MCU */ rt2661_tx_cmd(sc, RT2661_MCU_CMD_WAKEUP, 0); } static void rt2661_mcu_cmd_intr(struct rt2661_softc *sc) { RAL_READ(sc, RT2661_M2H_CMD_DONE_CSR); RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); } void rt2661_intr(void *arg) { struct rt2661_softc *sc = arg; uint32_t r1, r2; RAL_LOCK(sc); /* disable MAC and MCU interrupts */ RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffff7f); RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); /* don't re-enable interrupts if we're shutting down */ if (!(sc->sc_flags & RAL_RUNNING)) { RAL_UNLOCK(sc); return; } r1 = RAL_READ(sc, RT2661_INT_SOURCE_CSR); RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, r1); r2 = RAL_READ(sc, RT2661_MCU_INT_SOURCE_CSR); RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, r2); if (r1 & RT2661_MGT_DONE) rt2661_tx_dma_intr(sc, &sc->mgtq); if (r1 & RT2661_RX_DONE) rt2661_rx_intr(sc); if (r1 & RT2661_TX0_DMA_DONE) rt2661_tx_dma_intr(sc, &sc->txq[0]); if (r1 & RT2661_TX1_DMA_DONE) rt2661_tx_dma_intr(sc, &sc->txq[1]); if (r1 & RT2661_TX2_DMA_DONE) rt2661_tx_dma_intr(sc, &sc->txq[2]); if (r1 & RT2661_TX3_DMA_DONE) rt2661_tx_dma_intr(sc, &sc->txq[3]); if (r1 & RT2661_TX_DONE) rt2661_tx_intr(sc); if (r2 & RT2661_MCU_CMD_DONE) rt2661_mcu_cmd_intr(sc); if (r2 & RT2661_MCU_BEACON_EXPIRE) rt2661_mcu_beacon_expire(sc); if (r2 & RT2661_MCU_WAKEUP) rt2661_mcu_wakeup(sc); /* re-enable MAC and MCU interrupts */ RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); RAL_UNLOCK(sc); } static uint8_t rt2661_plcp_signal(int rate) { switch (rate) { /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ case 12: return 0xb; case 18: return 0xf; case 24: return 0xa; case 36: return 0xe; case 48: return 0x9; case 72: return 0xd; case 96: return 0x8; case 108: return 0xc; /* CCK rates (NB: not IEEE std, device-specific) */ case 2: return 0x0; case 4: return 0x1; case 11: return 0x2; case 22: return 0x3; } return 0xff; /* XXX unsupported/unknown rate */ } static void rt2661_setup_tx_desc(struct rt2661_softc *sc, struct rt2661_tx_desc *desc, uint32_t flags, uint16_t xflags, int len, int rate, const bus_dma_segment_t *segs, int nsegs, int ac) { struct ieee80211com *ic = &sc->sc_ic; uint16_t plcp_length; int i, remainder; desc->flags = htole32(flags); desc->flags |= htole32(len << 16); desc->flags |= htole32(RT2661_TX_BUSY | RT2661_TX_VALID); desc->xflags = htole16(xflags); desc->xflags |= htole16(nsegs << 13); desc->wme = htole16( RT2661_QID(ac) | RT2661_AIFSN(2) | RT2661_LOGCWMIN(4) | RT2661_LOGCWMAX(10)); /* * Remember in which queue this frame was sent. This field is driver * private data only. It will be made available by the NIC in STA_CSR4 * on Tx interrupts. */ desc->qid = ac; /* setup PLCP fields */ desc->plcp_signal = rt2661_plcp_signal(rate); desc->plcp_service = 4; len += IEEE80211_CRC_LEN; if (ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) { desc->flags |= htole32(RT2661_TX_OFDM); plcp_length = len & 0xfff; desc->plcp_length_hi = plcp_length >> 6; desc->plcp_length_lo = plcp_length & 0x3f; } else { plcp_length = howmany(16 * len, rate); if (rate == 22) { remainder = (16 * len) % 22; if (remainder != 0 && remainder < 7) desc->plcp_service |= RT2661_PLCP_LENGEXT; } desc->plcp_length_hi = plcp_length >> 8; desc->plcp_length_lo = plcp_length & 0xff; if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) desc->plcp_signal |= 0x08; } /* RT2x61 supports scatter with up to 5 segments */ for (i = 0; i < nsegs; i++) { desc->addr[i] = htole32(segs[i].ds_addr); desc->len [i] = htole16(segs[i].ds_len); } } static int rt2661_tx_mgt(struct rt2661_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct rt2661_tx_desc *desc; struct rt2661_tx_data *data; struct ieee80211_frame *wh; struct ieee80211_key *k; bus_dma_segment_t segs[RT2661_MAX_SCATTER]; uint16_t dur; uint32_t flags = 0; /* XXX HWSEQ */ int nsegs, rate, error; desc = &sc->mgtq.desc[sc->mgtq.cur]; data = &sc->mgtq.data[sc->mgtq.cur]; rate = vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)].mgmtrate; wh = mtod(m0, struct ieee80211_frame *); if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { k = ieee80211_crypto_encap(ni, m0); if (k == NULL) { m_freem(m0); return ENOBUFS; } } error = bus_dmamap_load_mbuf_sg(sc->mgtq.data_dmat, data->map, m0, segs, &nsegs, 0); if (error != 0) { device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", error); m_freem(m0); return error; } if (ieee80211_radiotap_active_vap(vap)) { struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; tap->wt_flags = 0; tap->wt_rate = rate; ieee80211_radiotap_tx(vap, m0); } data->m = m0; data->ni = ni; /* management frames are not taken into account for amrr */ data->rix = IEEE80211_FIXED_RATE_NONE; wh = mtod(m0, struct ieee80211_frame *); if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { flags |= RT2661_TX_NEED_ACK; dur = ieee80211_ack_duration(ic->ic_rt, rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); *(uint16_t *)wh->i_dur = htole16(dur); /* tell hardware to add timestamp in probe responses */ if ((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) flags |= RT2661_TX_TIMESTAMP; } rt2661_setup_tx_desc(sc, desc, flags, 0 /* XXX HWSEQ */, m0->m_pkthdr.len, rate, segs, nsegs, RT2661_QID_MGT); bus_dmamap_sync(sc->mgtq.data_dmat, data->map, BUS_DMASYNC_PREWRITE); bus_dmamap_sync(sc->mgtq.desc_dmat, sc->mgtq.desc_map, BUS_DMASYNC_PREWRITE); DPRINTFN(sc, 10, "sending mgt frame len=%u idx=%u rate=%u\n", m0->m_pkthdr.len, sc->mgtq.cur, rate); /* kick mgt */ sc->mgtq.queued++; sc->mgtq.cur = (sc->mgtq.cur + 1) % RT2661_MGT_RING_COUNT; RAL_WRITE(sc, RT2661_TX_CNTL_CSR, RT2661_KICK_MGT); return 0; } static int rt2661_sendprot(struct rt2661_softc *sc, int ac, const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) { struct ieee80211com *ic = ni->ni_ic; struct rt2661_tx_ring *txq = &sc->txq[ac]; const struct ieee80211_frame *wh; struct rt2661_tx_desc *desc; struct rt2661_tx_data *data; struct mbuf *mprot; int protrate, ackrate, pktlen, flags, isshort, error; uint16_t dur; bus_dma_segment_t segs[RT2661_MAX_SCATTER]; int nsegs; KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY, ("protection %d", prot)); wh = mtod(m, const struct ieee80211_frame *); pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN; protrate = ieee80211_ctl_rate(ic->ic_rt, rate); ackrate = ieee80211_ack_rate(ic->ic_rt, rate); isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0; dur = ieee80211_compute_duration(ic->ic_rt, pktlen, rate, isshort) + ieee80211_ack_duration(ic->ic_rt, rate, isshort); flags = RT2661_TX_MORE_FRAG; if (prot == IEEE80211_PROT_RTSCTS) { /* NB: CTS is the same size as an ACK */ dur += ieee80211_ack_duration(ic->ic_rt, rate, isshort); flags |= RT2661_TX_NEED_ACK; mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur); } else { mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur); } if (mprot == NULL) { /* XXX stat + msg */ return ENOBUFS; } data = &txq->data[txq->cur]; desc = &txq->desc[txq->cur]; error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, mprot, segs, &nsegs, 0); if (error != 0) { device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", error); m_freem(mprot); return error; } data->m = mprot; data->ni = ieee80211_ref_node(ni); /* ctl frames are not taken into account for amrr */ data->rix = IEEE80211_FIXED_RATE_NONE; rt2661_setup_tx_desc(sc, desc, flags, 0, mprot->m_pkthdr.len, protrate, segs, 1, ac); bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); txq->queued++; txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; return 0; } static int rt2661_tx_data(struct rt2661_softc *sc, struct mbuf *m0, struct ieee80211_node *ni, int ac) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = &sc->sc_ic; struct rt2661_tx_ring *txq = &sc->txq[ac]; struct rt2661_tx_desc *desc; struct rt2661_tx_data *data; struct ieee80211_frame *wh; const struct ieee80211_txparam *tp; struct ieee80211_key *k; const struct chanAccParams *cap; struct mbuf *mnew; bus_dma_segment_t segs[RT2661_MAX_SCATTER]; uint16_t dur; uint32_t flags; int error, nsegs, rate, noack = 0; wh = mtod(m0, struct ieee80211_frame *); tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)]; if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { rate = tp->mcastrate; } else if (m0->m_flags & M_EAPOL) { rate = tp->mgmtrate; } else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { rate = tp->ucastrate; } else { (void) ieee80211_ratectl_rate(ni, NULL, 0); rate = ni->ni_txrate; } rate &= IEEE80211_RATE_VAL; if (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS) { cap = &ic->ic_wme.wme_chanParams; noack = cap->cap_wmeParams[ac].wmep_noackPolicy; } if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { k = ieee80211_crypto_encap(ni, m0); if (k == NULL) { m_freem(m0); return ENOBUFS; } /* packet header may have moved, reset our local pointer */ wh = mtod(m0, struct ieee80211_frame *); } flags = 0; if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { int prot = IEEE80211_PROT_NONE; if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) prot = IEEE80211_PROT_RTSCTS; else if ((ic->ic_flags & IEEE80211_F_USEPROT) && ieee80211_rate2phytype(ic->ic_rt, rate) == IEEE80211_T_OFDM) prot = ic->ic_protmode; if (prot != IEEE80211_PROT_NONE) { error = rt2661_sendprot(sc, ac, m0, ni, prot, rate); if (error) { m_freem(m0); return error; } flags |= RT2661_TX_LONG_RETRY | RT2661_TX_IFS; } } data = &txq->data[txq->cur]; desc = &txq->desc[txq->cur]; error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs, &nsegs, 0); if (error != 0 && error != EFBIG) { device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", error); m_freem(m0); return error; } if (error != 0) { mnew = m_defrag(m0, M_NOWAIT); if (mnew == NULL) { device_printf(sc->sc_dev, "could not defragment mbuf\n"); m_freem(m0); return ENOBUFS; } m0 = mnew; error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs, &nsegs, 0); if (error != 0) { device_printf(sc->sc_dev, "could not map mbuf (error %d)\n", error); m_freem(m0); return error; } /* packet header have moved, reset our local pointer */ wh = mtod(m0, struct ieee80211_frame *); } if (ieee80211_radiotap_active_vap(vap)) { struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap; tap->wt_flags = 0; tap->wt_rate = rate; ieee80211_radiotap_tx(vap, m0); } data->m = m0; data->ni = ni; /* remember link conditions for rate adaptation algorithm */ if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) { data->rix = ni->ni_txrate; /* XXX probably need last rssi value and not avg */ data->rssi = ic->ic_node_getrssi(ni); } else data->rix = IEEE80211_FIXED_RATE_NONE; if (!noack && !IEEE80211_IS_MULTICAST(wh->i_addr1)) { flags |= RT2661_TX_NEED_ACK; dur = ieee80211_ack_duration(ic->ic_rt, rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE); *(uint16_t *)wh->i_dur = htole16(dur); } rt2661_setup_tx_desc(sc, desc, flags, 0, m0->m_pkthdr.len, rate, segs, nsegs, ac); bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE); bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE); DPRINTFN(sc, 10, "sending data frame len=%u idx=%u rate=%u\n", m0->m_pkthdr.len, txq->cur, rate); /* kick Tx */ txq->queued++; txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT; RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 1 << ac); return 0; } static int rt2661_transmit(struct ieee80211com *ic, struct mbuf *m) { struct rt2661_softc *sc = ic->ic_softc; int error; RAL_LOCK(sc); if ((sc->sc_flags & RAL_RUNNING) == 0) { RAL_UNLOCK(sc); return (ENXIO); } error = mbufq_enqueue(&sc->sc_snd, m); if (error) { RAL_UNLOCK(sc); return (error); } rt2661_start(sc); RAL_UNLOCK(sc); return (0); } static void rt2661_start(struct rt2661_softc *sc) { struct mbuf *m; struct ieee80211_node *ni; int ac; RAL_LOCK_ASSERT(sc); /* prevent management frames from being sent if we're not ready */ if (!(sc->sc_flags & RAL_RUNNING) || sc->sc_invalid) return; while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { ac = M_WME_GETAC(m); if (sc->txq[ac].queued >= RT2661_TX_RING_COUNT - 1) { /* there is no place left in this ring */ mbufq_prepend(&sc->sc_snd, m); break; } ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; if (rt2661_tx_data(sc, m, ni, ac) != 0) { - ieee80211_free_node(ni); if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1); + ieee80211_free_node(ni); break; } sc->sc_tx_timer = 5; } } static int rt2661_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, const struct ieee80211_bpf_params *params) { struct ieee80211com *ic = ni->ni_ic; struct rt2661_softc *sc = ic->ic_softc; RAL_LOCK(sc); /* prevent management frames from being sent if we're not ready */ if (!(sc->sc_flags & RAL_RUNNING)) { RAL_UNLOCK(sc); m_freem(m); return ENETDOWN; } if (sc->mgtq.queued >= RT2661_MGT_RING_COUNT) { RAL_UNLOCK(sc); m_freem(m); return ENOBUFS; /* XXX */ } /* * Legacy path; interpret frame contents to decide * precisely how to send the frame. * XXX raw path */ if (rt2661_tx_mgt(sc, m, ni) != 0) goto bad; sc->sc_tx_timer = 5; RAL_UNLOCK(sc); return 0; bad: RAL_UNLOCK(sc); return EIO; /* XXX */ } static void rt2661_watchdog(void *arg) { struct rt2661_softc *sc = (struct rt2661_softc *)arg; RAL_LOCK_ASSERT(sc); KASSERT(sc->sc_flags & RAL_RUNNING, ("not running")); if (sc->sc_invalid) /* card ejected */ return; if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) { device_printf(sc->sc_dev, "device timeout\n"); rt2661_init_locked(sc); counter_u64_add(sc->sc_ic.ic_oerrors, 1); /* NB: callout is reset in rt2661_init() */ return; } callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); } static void rt2661_parent(struct ieee80211com *ic) { struct rt2661_softc *sc = ic->ic_softc; int startall = 0; RAL_LOCK(sc); if (ic->ic_nrunning > 0) { if ((sc->sc_flags & RAL_RUNNING) == 0) { rt2661_init_locked(sc); startall = 1; } else rt2661_update_promisc(ic); } else if (sc->sc_flags & RAL_RUNNING) rt2661_stop_locked(sc); RAL_UNLOCK(sc); if (startall) ieee80211_start_all(ic); } static void rt2661_bbp_write(struct rt2661_softc *sc, uint8_t reg, uint8_t val) { uint32_t tmp; int ntries; for (ntries = 0; ntries < 100; ntries++) { if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) break; DELAY(1); } if (ntries == 100) { device_printf(sc->sc_dev, "could not write to BBP\n"); return; } tmp = RT2661_BBP_BUSY | (reg & 0x7f) << 8 | val; RAL_WRITE(sc, RT2661_PHY_CSR3, tmp); DPRINTFN(sc, 15, "BBP R%u <- 0x%02x\n", reg, val); } static uint8_t rt2661_bbp_read(struct rt2661_softc *sc, uint8_t reg) { uint32_t val; int ntries; for (ntries = 0; ntries < 100; ntries++) { if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY)) break; DELAY(1); } if (ntries == 100) { device_printf(sc->sc_dev, "could not read from BBP\n"); return 0; } val = RT2661_BBP_BUSY | RT2661_BBP_READ | reg << 8; RAL_WRITE(sc, RT2661_PHY_CSR3, val); for (ntries = 0; ntries < 100; ntries++) { val = RAL_READ(sc, RT2661_PHY_CSR3); if (!(val & RT2661_BBP_BUSY)) return val & 0xff; DELAY(1); } device_printf(sc->sc_dev, "could not read from BBP\n"); return 0; } static void rt2661_rf_write(struct rt2661_softc *sc, uint8_t reg, uint32_t val) { uint32_t tmp; int ntries; for (ntries = 0; ntries < 100; ntries++) { if (!(RAL_READ(sc, RT2661_PHY_CSR4) & RT2661_RF_BUSY)) break; DELAY(1); } if (ntries == 100) { device_printf(sc->sc_dev, "could not write to RF\n"); return; } tmp = RT2661_RF_BUSY | RT2661_RF_21BIT | (val & 0x1fffff) << 2 | (reg & 3); RAL_WRITE(sc, RT2661_PHY_CSR4, tmp); /* remember last written value in sc */ sc->rf_regs[reg] = val; DPRINTFN(sc, 15, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0x1fffff); } static int rt2661_tx_cmd(struct rt2661_softc *sc, uint8_t cmd, uint16_t arg) { if (RAL_READ(sc, RT2661_H2M_MAILBOX_CSR) & RT2661_H2M_BUSY) return EIO; /* there is already a command pending */ RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, RT2661_H2M_BUSY | RT2661_TOKEN_NO_INTR << 16 | arg); RAL_WRITE(sc, RT2661_HOST_CMD_CSR, RT2661_KICK_CMD | cmd); return 0; } static void rt2661_select_antenna(struct rt2661_softc *sc) { uint8_t bbp4, bbp77; uint32_t tmp; bbp4 = rt2661_bbp_read(sc, 4); bbp77 = rt2661_bbp_read(sc, 77); /* TBD */ /* make sure Rx is disabled before switching antenna */ tmp = RAL_READ(sc, RT2661_TXRX_CSR0); RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); rt2661_bbp_write(sc, 4, bbp4); rt2661_bbp_write(sc, 77, bbp77); /* restore Rx filter */ RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); } /* * Enable multi-rate retries for frames sent at OFDM rates. * In 802.11b/g mode, allow fallback to CCK rates. */ static void rt2661_enable_mrr(struct rt2661_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; uint32_t tmp; tmp = RAL_READ(sc, RT2661_TXRX_CSR4); tmp &= ~RT2661_MRR_CCK_FALLBACK; if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan)) tmp |= RT2661_MRR_CCK_FALLBACK; tmp |= RT2661_MRR_ENABLED; RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); } static void rt2661_set_txpreamble(struct rt2661_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; uint32_t tmp; tmp = RAL_READ(sc, RT2661_TXRX_CSR4); tmp &= ~RT2661_SHORT_PREAMBLE; if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) tmp |= RT2661_SHORT_PREAMBLE; RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp); } static void rt2661_set_basicrates(struct rt2661_softc *sc, const struct ieee80211_rateset *rs) { struct ieee80211com *ic = &sc->sc_ic; uint32_t mask = 0; uint8_t rate; int i; for (i = 0; i < rs->rs_nrates; i++) { rate = rs->rs_rates[i]; if (!(rate & IEEE80211_RATE_BASIC)) continue; mask |= 1 << ieee80211_legacy_rate_lookup(ic->ic_rt, IEEE80211_RV(rate)); } RAL_WRITE(sc, RT2661_TXRX_CSR5, mask); DPRINTF(sc, "Setting basic rate mask to 0x%x\n", mask); } /* * Reprogram MAC/BBP to switch to a new band. Values taken from the reference * driver. */ static void rt2661_select_band(struct rt2661_softc *sc, struct ieee80211_channel *c) { uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104; uint32_t tmp; /* update all BBP registers that depend on the band */ bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c; bbp35 = 0x50; bbp97 = 0x48; bbp98 = 0x48; if (IEEE80211_IS_CHAN_5GHZ(c)) { bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c; bbp35 += 0x10; bbp97 += 0x10; bbp98 += 0x10; } if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10; } rt2661_bbp_write(sc, 17, bbp17); rt2661_bbp_write(sc, 96, bbp96); rt2661_bbp_write(sc, 104, bbp104); if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) || (IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) { rt2661_bbp_write(sc, 75, 0x80); rt2661_bbp_write(sc, 86, 0x80); rt2661_bbp_write(sc, 88, 0x80); } rt2661_bbp_write(sc, 35, bbp35); rt2661_bbp_write(sc, 97, bbp97); rt2661_bbp_write(sc, 98, bbp98); tmp = RAL_READ(sc, RT2661_PHY_CSR0); tmp &= ~(RT2661_PA_PE_2GHZ | RT2661_PA_PE_5GHZ); if (IEEE80211_IS_CHAN_2GHZ(c)) tmp |= RT2661_PA_PE_2GHZ; else tmp |= RT2661_PA_PE_5GHZ; RAL_WRITE(sc, RT2661_PHY_CSR0, tmp); } static void rt2661_set_chan(struct rt2661_softc *sc, struct ieee80211_channel *c) { struct ieee80211com *ic = &sc->sc_ic; const struct rfprog *rfprog; uint8_t bbp3, bbp94 = RT2661_BBPR94_DEFAULT; int8_t power; u_int i, chan; chan = ieee80211_chan2ieee(ic, c); KASSERT(chan != 0 && chan != IEEE80211_CHAN_ANY, ("chan 0x%x", chan)); /* select the appropriate RF settings based on what EEPROM says */ rfprog = (sc->rfprog == 0) ? rt2661_rf5225_1 : rt2661_rf5225_2; /* find the settings for this channel (we know it exists) */ for (i = 0; rfprog[i].chan != chan; i++); power = sc->txpow[i]; if (power < 0) { bbp94 += power; power = 0; } else if (power > 31) { bbp94 += power - 31; power = 31; } /* * If we are switching from the 2GHz band to the 5GHz band or * vice-versa, BBP registers need to be reprogrammed. */ if (c->ic_flags != sc->sc_curchan->ic_flags) { rt2661_select_band(sc, c); rt2661_select_antenna(sc); } sc->sc_curchan = c; rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); DELAY(200); rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7 | 1); rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); DELAY(200); rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1); rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2); rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7); rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10); /* enable smart mode for MIMO-capable RFs */ bbp3 = rt2661_bbp_read(sc, 3); bbp3 &= ~RT2661_SMART_MODE; if (sc->rf_rev == RT2661_RF_5325 || sc->rf_rev == RT2661_RF_2529) bbp3 |= RT2661_SMART_MODE; rt2661_bbp_write(sc, 3, bbp3); if (bbp94 != RT2661_BBPR94_DEFAULT) rt2661_bbp_write(sc, 94, bbp94); /* 5GHz radio needs a 1ms delay here */ if (IEEE80211_IS_CHAN_5GHZ(c)) DELAY(1000); } static void rt2661_set_bssid(struct rt2661_softc *sc, const uint8_t *bssid) { uint32_t tmp; tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24; RAL_WRITE(sc, RT2661_MAC_CSR4, tmp); tmp = bssid[4] | bssid[5] << 8 | RT2661_ONE_BSSID << 16; RAL_WRITE(sc, RT2661_MAC_CSR5, tmp); } static void rt2661_set_macaddr(struct rt2661_softc *sc, const uint8_t *addr) { uint32_t tmp; tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24; RAL_WRITE(sc, RT2661_MAC_CSR2, tmp); tmp = addr[4] | addr[5] << 8; RAL_WRITE(sc, RT2661_MAC_CSR3, tmp); } static void rt2661_update_promisc(struct ieee80211com *ic) { struct rt2661_softc *sc = ic->ic_softc; uint32_t tmp; tmp = RAL_READ(sc, RT2661_TXRX_CSR0); tmp &= ~RT2661_DROP_NOT_TO_ME; if (ic->ic_promisc == 0) tmp |= RT2661_DROP_NOT_TO_ME; RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); DPRINTF(sc, "%s promiscuous mode\n", (ic->ic_promisc > 0) ? "entering" : "leaving"); } /* * Update QoS (802.11e) settings for each h/w Tx ring. */ static int rt2661_wme_update(struct ieee80211com *ic) { struct rt2661_softc *sc = ic->ic_softc; const struct wmeParams *wmep; wmep = ic->ic_wme.wme_chanParams.cap_wmeParams; /* XXX: not sure about shifts. */ /* XXX: the reference driver plays with AC_VI settings too. */ /* update TxOp */ RAL_WRITE(sc, RT2661_AC_TXOP_CSR0, wmep[WME_AC_BE].wmep_txopLimit << 16 | wmep[WME_AC_BK].wmep_txopLimit); RAL_WRITE(sc, RT2661_AC_TXOP_CSR1, wmep[WME_AC_VI].wmep_txopLimit << 16 | wmep[WME_AC_VO].wmep_txopLimit); /* update CWmin */ RAL_WRITE(sc, RT2661_CWMIN_CSR, wmep[WME_AC_BE].wmep_logcwmin << 12 | wmep[WME_AC_BK].wmep_logcwmin << 8 | wmep[WME_AC_VI].wmep_logcwmin << 4 | wmep[WME_AC_VO].wmep_logcwmin); /* update CWmax */ RAL_WRITE(sc, RT2661_CWMAX_CSR, wmep[WME_AC_BE].wmep_logcwmax << 12 | wmep[WME_AC_BK].wmep_logcwmax << 8 | wmep[WME_AC_VI].wmep_logcwmax << 4 | wmep[WME_AC_VO].wmep_logcwmax); /* update Aifsn */ RAL_WRITE(sc, RT2661_AIFSN_CSR, wmep[WME_AC_BE].wmep_aifsn << 12 | wmep[WME_AC_BK].wmep_aifsn << 8 | wmep[WME_AC_VI].wmep_aifsn << 4 | wmep[WME_AC_VO].wmep_aifsn); return 0; } static void rt2661_update_slot(struct ieee80211com *ic) { struct rt2661_softc *sc = ic->ic_softc; uint8_t slottime; uint32_t tmp; slottime = IEEE80211_GET_SLOTTIME(ic); tmp = RAL_READ(sc, RT2661_MAC_CSR9); tmp = (tmp & ~0xff) | slottime; RAL_WRITE(sc, RT2661_MAC_CSR9, tmp); } static const char * rt2661_get_rf(int rev) { switch (rev) { case RT2661_RF_5225: return "RT5225"; case RT2661_RF_5325: return "RT5325 (MIMO XR)"; case RT2661_RF_2527: return "RT2527"; case RT2661_RF_2529: return "RT2529 (MIMO XR)"; default: return "unknown"; } } static void rt2661_read_eeprom(struct rt2661_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN]) { uint16_t val; int i; /* read MAC address */ val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC01); macaddr[0] = val & 0xff; macaddr[1] = val >> 8; val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC23); macaddr[2] = val & 0xff; macaddr[3] = val >> 8; val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC45); macaddr[4] = val & 0xff; macaddr[5] = val >> 8; val = rt2661_eeprom_read(sc, RT2661_EEPROM_ANTENNA); /* XXX: test if different from 0xffff? */ sc->rf_rev = (val >> 11) & 0x1f; sc->hw_radio = (val >> 10) & 0x1; sc->rx_ant = (val >> 4) & 0x3; sc->tx_ant = (val >> 2) & 0x3; sc->nb_ant = val & 0x3; DPRINTF(sc, "RF revision=%d\n", sc->rf_rev); val = rt2661_eeprom_read(sc, RT2661_EEPROM_CONFIG2); sc->ext_5ghz_lna = (val >> 6) & 0x1; sc->ext_2ghz_lna = (val >> 4) & 0x1; DPRINTF(sc, "External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n", sc->ext_2ghz_lna, sc->ext_5ghz_lna); val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_2GHZ_OFFSET); if ((val & 0xff) != 0xff) sc->rssi_2ghz_corr = (int8_t)(val & 0xff); /* signed */ /* Only [-10, 10] is valid */ if (sc->rssi_2ghz_corr < -10 || sc->rssi_2ghz_corr > 10) sc->rssi_2ghz_corr = 0; val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_5GHZ_OFFSET); if ((val & 0xff) != 0xff) sc->rssi_5ghz_corr = (int8_t)(val & 0xff); /* signed */ /* Only [-10, 10] is valid */ if (sc->rssi_5ghz_corr < -10 || sc->rssi_5ghz_corr > 10) sc->rssi_5ghz_corr = 0; /* adjust RSSI correction for external low-noise amplifier */ if (sc->ext_2ghz_lna) sc->rssi_2ghz_corr -= 14; if (sc->ext_5ghz_lna) sc->rssi_5ghz_corr -= 14; DPRINTF(sc, "RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n", sc->rssi_2ghz_corr, sc->rssi_5ghz_corr); val = rt2661_eeprom_read(sc, RT2661_EEPROM_FREQ_OFFSET); if ((val >> 8) != 0xff) sc->rfprog = (val >> 8) & 0x3; if ((val & 0xff) != 0xff) sc->rffreq = val & 0xff; DPRINTF(sc, "RF prog=%d\nRF freq=%d\n", sc->rfprog, sc->rffreq); /* read Tx power for all a/b/g channels */ for (i = 0; i < 19; i++) { val = rt2661_eeprom_read(sc, RT2661_EEPROM_TXPOWER + i); sc->txpow[i * 2] = (int8_t)(val >> 8); /* signed */ DPRINTF(sc, "Channel=%d Tx power=%d\n", rt2661_rf5225_1[i * 2].chan, sc->txpow[i * 2]); sc->txpow[i * 2 + 1] = (int8_t)(val & 0xff); /* signed */ DPRINTF(sc, "Channel=%d Tx power=%d\n", rt2661_rf5225_1[i * 2 + 1].chan, sc->txpow[i * 2 + 1]); } /* read vendor-specific BBP values */ for (i = 0; i < 16; i++) { val = rt2661_eeprom_read(sc, RT2661_EEPROM_BBP_BASE + i); if (val == 0 || val == 0xffff) continue; /* skip invalid entries */ sc->bbp_prom[i].reg = val >> 8; sc->bbp_prom[i].val = val & 0xff; DPRINTF(sc, "BBP R%d=%02x\n", sc->bbp_prom[i].reg, sc->bbp_prom[i].val); } } static int rt2661_bbp_init(struct rt2661_softc *sc) { int i, ntries; uint8_t val; /* wait for BBP to be ready */ for (ntries = 0; ntries < 100; ntries++) { val = rt2661_bbp_read(sc, 0); if (val != 0 && val != 0xff) break; DELAY(100); } if (ntries == 100) { device_printf(sc->sc_dev, "timeout waiting for BBP\n"); return EIO; } /* initialize BBP registers to default values */ for (i = 0; i < nitems(rt2661_def_bbp); i++) { rt2661_bbp_write(sc, rt2661_def_bbp[i].reg, rt2661_def_bbp[i].val); } /* write vendor-specific BBP values (from EEPROM) */ for (i = 0; i < 16; i++) { if (sc->bbp_prom[i].reg == 0) continue; rt2661_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val); } return 0; } static void rt2661_init_locked(struct rt2661_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); uint32_t tmp, sta[3]; int i, error, ntries; RAL_LOCK_ASSERT(sc); if ((sc->sc_flags & RAL_FW_LOADED) == 0) { error = rt2661_load_microcode(sc); if (error != 0) { device_printf(sc->sc_dev, "%s: could not load 8051 microcode, error %d\n", __func__, error); return; } sc->sc_flags |= RAL_FW_LOADED; } rt2661_stop_locked(sc); /* initialize Tx rings */ RAL_WRITE(sc, RT2661_AC1_BASE_CSR, sc->txq[1].physaddr); RAL_WRITE(sc, RT2661_AC0_BASE_CSR, sc->txq[0].physaddr); RAL_WRITE(sc, RT2661_AC2_BASE_CSR, sc->txq[2].physaddr); RAL_WRITE(sc, RT2661_AC3_BASE_CSR, sc->txq[3].physaddr); /* initialize Mgt ring */ RAL_WRITE(sc, RT2661_MGT_BASE_CSR, sc->mgtq.physaddr); /* initialize Rx ring */ RAL_WRITE(sc, RT2661_RX_BASE_CSR, sc->rxq.physaddr); /* initialize Tx rings sizes */ RAL_WRITE(sc, RT2661_TX_RING_CSR0, RT2661_TX_RING_COUNT << 24 | RT2661_TX_RING_COUNT << 16 | RT2661_TX_RING_COUNT << 8 | RT2661_TX_RING_COUNT); RAL_WRITE(sc, RT2661_TX_RING_CSR1, RT2661_TX_DESC_WSIZE << 16 | RT2661_TX_RING_COUNT << 8 | /* XXX: HCCA ring unused */ RT2661_MGT_RING_COUNT); /* initialize Rx rings */ RAL_WRITE(sc, RT2661_RX_RING_CSR, RT2661_RX_DESC_BACK << 16 | RT2661_RX_DESC_WSIZE << 8 | RT2661_RX_RING_COUNT); /* XXX: some magic here */ RAL_WRITE(sc, RT2661_TX_DMA_DST_CSR, 0xaa); /* load base addresses of all 5 Tx rings (4 data + 1 mgt) */ RAL_WRITE(sc, RT2661_LOAD_TX_RING_CSR, 0x1f); /* load base address of Rx ring */ RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 2); /* initialize MAC registers to default values */ for (i = 0; i < nitems(rt2661_def_mac); i++) RAL_WRITE(sc, rt2661_def_mac[i].reg, rt2661_def_mac[i].val); rt2661_set_macaddr(sc, vap ? vap->iv_myaddr : ic->ic_macaddr); /* set host ready */ RAL_WRITE(sc, RT2661_MAC_CSR1, 3); RAL_WRITE(sc, RT2661_MAC_CSR1, 0); /* wait for BBP/RF to wakeup */ for (ntries = 0; ntries < 1000; ntries++) { if (RAL_READ(sc, RT2661_MAC_CSR12) & 8) break; DELAY(1000); } if (ntries == 1000) { printf("timeout waiting for BBP/RF to wakeup\n"); rt2661_stop_locked(sc); return; } if (rt2661_bbp_init(sc) != 0) { rt2661_stop_locked(sc); return; } /* select default channel */ sc->sc_curchan = ic->ic_curchan; rt2661_select_band(sc, sc->sc_curchan); rt2661_select_antenna(sc); rt2661_set_chan(sc, sc->sc_curchan); /* update Rx filter */ tmp = RAL_READ(sc, RT2661_TXRX_CSR0) & 0xffff; tmp |= RT2661_DROP_PHY_ERROR | RT2661_DROP_CRC_ERROR; if (ic->ic_opmode != IEEE80211_M_MONITOR) { tmp |= RT2661_DROP_CTL | RT2661_DROP_VER_ERROR | RT2661_DROP_ACKCTS; if (ic->ic_opmode != IEEE80211_M_HOSTAP && ic->ic_opmode != IEEE80211_M_MBSS) tmp |= RT2661_DROP_TODS; if (ic->ic_promisc == 0) tmp |= RT2661_DROP_NOT_TO_ME; } RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); /* clear STA registers */ RAL_READ_REGION_4(sc, RT2661_STA_CSR0, sta, nitems(sta)); /* initialize ASIC */ RAL_WRITE(sc, RT2661_MAC_CSR1, 4); /* clear any pending interrupt */ RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); /* enable interrupts */ RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10); RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0); /* kick Rx */ RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 1); sc->sc_flags |= RAL_RUNNING; callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc); } static void rt2661_init(void *priv) { struct rt2661_softc *sc = priv; struct ieee80211com *ic = &sc->sc_ic; RAL_LOCK(sc); rt2661_init_locked(sc); RAL_UNLOCK(sc); if (sc->sc_flags & RAL_RUNNING) ieee80211_start_all(ic); /* start all vap's */ } void rt2661_stop_locked(struct rt2661_softc *sc) { volatile int *flags = &sc->sc_flags; uint32_t tmp; while (*flags & RAL_INPUT_RUNNING) msleep(sc, &sc->sc_mtx, 0, "ralrunning", hz/10); callout_stop(&sc->watchdog_ch); sc->sc_tx_timer = 0; if (sc->sc_flags & RAL_RUNNING) { sc->sc_flags &= ~RAL_RUNNING; /* abort Tx (for all 5 Tx rings) */ RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 0x1f << 16); /* disable Rx (value remains after reset!) */ tmp = RAL_READ(sc, RT2661_TXRX_CSR0); RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); /* reset ASIC */ RAL_WRITE(sc, RT2661_MAC_CSR1, 3); RAL_WRITE(sc, RT2661_MAC_CSR1, 0); /* disable interrupts */ RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffffff); RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff); /* clear any pending interrupt */ RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff); RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, 0xffffffff); /* reset Tx and Rx rings */ rt2661_reset_tx_ring(sc, &sc->txq[0]); rt2661_reset_tx_ring(sc, &sc->txq[1]); rt2661_reset_tx_ring(sc, &sc->txq[2]); rt2661_reset_tx_ring(sc, &sc->txq[3]); rt2661_reset_tx_ring(sc, &sc->mgtq); rt2661_reset_rx_ring(sc, &sc->rxq); } } void rt2661_stop(void *priv) { struct rt2661_softc *sc = priv; RAL_LOCK(sc); rt2661_stop_locked(sc); RAL_UNLOCK(sc); } static int rt2661_load_microcode(struct rt2661_softc *sc) { const struct firmware *fp; const char *imagename; int ntries, error; RAL_LOCK_ASSERT(sc); switch (sc->sc_id) { case 0x0301: imagename = "rt2561sfw"; break; case 0x0302: imagename = "rt2561fw"; break; case 0x0401: imagename = "rt2661fw"; break; default: device_printf(sc->sc_dev, "%s: unexpected pci device id 0x%x, " "don't know how to retrieve firmware\n", __func__, sc->sc_id); return EINVAL; } RAL_UNLOCK(sc); fp = firmware_get(imagename); RAL_LOCK(sc); if (fp == NULL) { device_printf(sc->sc_dev, "%s: unable to retrieve firmware image %s\n", __func__, imagename); return EINVAL; } /* * Load 8051 microcode into NIC. */ /* reset 8051 */ RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); /* cancel any pending Host to MCU command */ RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 0); RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff); RAL_WRITE(sc, RT2661_HOST_CMD_CSR, 0); /* write 8051's microcode */ RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET | RT2661_MCU_SEL); RAL_WRITE_REGION_1(sc, RT2661_MCU_CODE_BASE, fp->data, fp->datasize); RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET); /* kick 8051's ass */ RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, 0); /* wait for 8051 to initialize */ for (ntries = 0; ntries < 500; ntries++) { if (RAL_READ(sc, RT2661_MCU_CNTL_CSR) & RT2661_MCU_READY) break; DELAY(100); } if (ntries == 500) { device_printf(sc->sc_dev, "%s: timeout waiting for MCU to initialize\n", __func__); error = EIO; } else error = 0; firmware_put(fp, FIRMWARE_UNLOAD); return error; } #ifdef notyet /* * Dynamically tune Rx sensitivity (BBP register 17) based on average RSSI and * false CCA count. This function is called periodically (every seconds) when * in the RUN state. Values taken from the reference driver. */ static void rt2661_rx_tune(struct rt2661_softc *sc) { uint8_t bbp17; uint16_t cca; int lo, hi, dbm; /* * Tuning range depends on operating band and on the presence of an * external low-noise amplifier. */ lo = 0x20; if (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan)) lo += 0x08; if ((IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan) && sc->ext_2ghz_lna) || (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan) && sc->ext_5ghz_lna)) lo += 0x10; hi = lo + 0x20; /* retrieve false CCA count since last call (clear on read) */ cca = RAL_READ(sc, RT2661_STA_CSR1) & 0xffff; if (dbm >= -35) { bbp17 = 0x60; } else if (dbm >= -58) { bbp17 = hi; } else if (dbm >= -66) { bbp17 = lo + 0x10; } else if (dbm >= -74) { bbp17 = lo + 0x08; } else { /* RSSI < -74dBm, tune using false CCA count */ bbp17 = sc->bbp17; /* current value */ hi -= 2 * (-74 - dbm); if (hi < lo) hi = lo; if (bbp17 > hi) { bbp17 = hi; } else if (cca > 512) { if (++bbp17 > hi) bbp17 = hi; } else if (cca < 100) { if (--bbp17 < lo) bbp17 = lo; } } if (bbp17 != sc->bbp17) { rt2661_bbp_write(sc, 17, bbp17); sc->bbp17 = bbp17; } } /* * Enter/Leave radar detection mode. * This is for 802.11h additional regulatory domains. */ static void rt2661_radar_start(struct rt2661_softc *sc) { uint32_t tmp; /* disable Rx */ tmp = RAL_READ(sc, RT2661_TXRX_CSR0); RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX); rt2661_bbp_write(sc, 82, 0x20); rt2661_bbp_write(sc, 83, 0x00); rt2661_bbp_write(sc, 84, 0x40); /* save current BBP registers values */ sc->bbp18 = rt2661_bbp_read(sc, 18); sc->bbp21 = rt2661_bbp_read(sc, 21); sc->bbp22 = rt2661_bbp_read(sc, 22); sc->bbp16 = rt2661_bbp_read(sc, 16); sc->bbp17 = rt2661_bbp_read(sc, 17); sc->bbp64 = rt2661_bbp_read(sc, 64); rt2661_bbp_write(sc, 18, 0xff); rt2661_bbp_write(sc, 21, 0x3f); rt2661_bbp_write(sc, 22, 0x3f); rt2661_bbp_write(sc, 16, 0xbd); rt2661_bbp_write(sc, 17, sc->ext_5ghz_lna ? 0x44 : 0x34); rt2661_bbp_write(sc, 64, 0x21); /* restore Rx filter */ RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp); } static int rt2661_radar_stop(struct rt2661_softc *sc) { uint8_t bbp66; /* read radar detection result */ bbp66 = rt2661_bbp_read(sc, 66); /* restore BBP registers values */ rt2661_bbp_write(sc, 16, sc->bbp16); rt2661_bbp_write(sc, 17, sc->bbp17); rt2661_bbp_write(sc, 18, sc->bbp18); rt2661_bbp_write(sc, 21, sc->bbp21); rt2661_bbp_write(sc, 22, sc->bbp22); rt2661_bbp_write(sc, 64, sc->bbp64); return bbp66 == 1; } #endif static int rt2661_prepare_beacon(struct rt2661_softc *sc, struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct rt2661_tx_desc desc; struct mbuf *m0; int rate; if ((m0 = ieee80211_beacon_alloc(vap->iv_bss))== NULL) { device_printf(sc->sc_dev, "could not allocate beacon frame\n"); return ENOBUFS; } /* send beacons at the lowest available rate */ rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan) ? 12 : 2; rt2661_setup_tx_desc(sc, &desc, RT2661_TX_TIMESTAMP, RT2661_TX_HWSEQ, m0->m_pkthdr.len, rate, NULL, 0, RT2661_QID_MGT); /* copy the first 24 bytes of Tx descriptor into NIC memory */ RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0, (uint8_t *)&desc, 24); /* copy beacon header and payload into NIC memory */ RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0 + 24, mtod(m0, uint8_t *), m0->m_pkthdr.len); m_freem(m0); return 0; } /* * Enable TSF synchronization and tell h/w to start sending beacons for IBSS * and HostAP operating modes. */ static void rt2661_enable_tsf_sync(struct rt2661_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); uint32_t tmp; if (vap->iv_opmode != IEEE80211_M_STA) { /* * Change default 16ms TBTT adjustment to 8ms. * Must be done before enabling beacon generation. */ RAL_WRITE(sc, RT2661_TXRX_CSR10, 1 << 12 | 8); } tmp = RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000; /* set beacon interval (in 1/16ms unit) */ tmp |= vap->iv_bss->ni_intval * 16; tmp |= RT2661_TSF_TICKING | RT2661_ENABLE_TBTT; if (vap->iv_opmode == IEEE80211_M_STA) tmp |= RT2661_TSF_MODE(1); else tmp |= RT2661_TSF_MODE(2) | RT2661_GENERATE_BEACON; RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp); } static void rt2661_enable_tsf(struct rt2661_softc *sc) { RAL_WRITE(sc, RT2661_TXRX_CSR9, (RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000) | RT2661_TSF_TICKING | RT2661_TSF_MODE(2)); } /* * Retrieve the "Received Signal Strength Indicator" from the raw values * contained in Rx descriptors. The computation depends on which band the * frame was received. Correction values taken from the reference driver. */ static int rt2661_get_rssi(struct rt2661_softc *sc, uint8_t raw) { int lna, agc, rssi; lna = (raw >> 5) & 0x3; agc = raw & 0x1f; if (lna == 0) { /* * No mapping available. * * NB: Since RSSI is relative to noise floor, -1 is * adequate for caller to know error happened. */ return -1; } rssi = (2 * agc) - RT2661_NOISE_FLOOR; if (IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan)) { rssi += sc->rssi_2ghz_corr; if (lna == 1) rssi -= 64; else if (lna == 2) rssi -= 74; else if (lna == 3) rssi -= 90; } else { rssi += sc->rssi_5ghz_corr; if (lna == 1) rssi -= 64; else if (lna == 2) rssi -= 86; else if (lna == 3) rssi -= 100; } return rssi; } static void rt2661_scan_start(struct ieee80211com *ic) { struct rt2661_softc *sc = ic->ic_softc; uint32_t tmp; /* abort TSF synchronization */ tmp = RAL_READ(sc, RT2661_TXRX_CSR9); RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0xffffff); rt2661_set_bssid(sc, ieee80211broadcastaddr); } static void rt2661_scan_end(struct ieee80211com *ic) { struct rt2661_softc *sc = ic->ic_softc; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); rt2661_enable_tsf_sync(sc); /* XXX keep local copy */ rt2661_set_bssid(sc, vap->iv_bss->ni_bssid); } static void rt2661_getradiocaps(struct ieee80211com *ic, int maxchans, int *nchans, struct ieee80211_channel chans[]) { struct rt2661_softc *sc = ic->ic_softc; uint8_t bands[IEEE80211_MODE_BYTES]; memset(bands, 0, sizeof(bands)); setbit(bands, IEEE80211_MODE_11B); setbit(bands, IEEE80211_MODE_11G); ieee80211_add_channel_list_2ghz(chans, maxchans, nchans, rt2661_chan_2ghz, nitems(rt2661_chan_2ghz), bands, 0); if (sc->rf_rev == RT2661_RF_5225 || sc->rf_rev == RT2661_RF_5325) { setbit(bands, IEEE80211_MODE_11A); ieee80211_add_channel_list_5ghz(chans, maxchans, nchans, rt2661_chan_5ghz, nitems(rt2661_chan_5ghz), bands, 0); } } static void rt2661_set_channel(struct ieee80211com *ic) { struct rt2661_softc *sc = ic->ic_softc; RAL_LOCK(sc); rt2661_set_chan(sc, ic->ic_curchan); RAL_UNLOCK(sc); } Index: stable/11/sys/dev/usb/wlan/if_zyd.c =================================================================== --- stable/11/sys/dev/usb/wlan/if_zyd.c (revision 314221) +++ stable/11/sys/dev/usb/wlan/if_zyd.c (revision 314222) @@ -1,2910 +1,2910 @@ /* $OpenBSD: if_zyd.c,v 1.52 2007/02/11 00:08:04 jsg Exp $ */ /* $NetBSD: if_zyd.c,v 1.7 2007/06/21 04:04:29 kiyohara Exp $ */ /* $FreeBSD$ */ /*- * Copyright (c) 2006 by Damien Bergamini * Copyright (c) 2006 by Florian Stoehr * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include __FBSDID("$FreeBSD$"); /* * ZyDAS ZD1211/ZD1211B USB WLAN driver. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #include #include #include #include #include #include #include #include "usbdevs.h" #include #include #ifdef USB_DEBUG static int zyd_debug = 0; static SYSCTL_NODE(_hw_usb, OID_AUTO, zyd, CTLFLAG_RW, 0, "USB zyd"); SYSCTL_INT(_hw_usb_zyd, OID_AUTO, debug, CTLFLAG_RWTUN, &zyd_debug, 0, "zyd debug level"); enum { ZYD_DEBUG_XMIT = 0x00000001, /* basic xmit operation */ ZYD_DEBUG_RECV = 0x00000002, /* basic recv operation */ ZYD_DEBUG_RESET = 0x00000004, /* reset processing */ ZYD_DEBUG_INIT = 0x00000008, /* device init */ ZYD_DEBUG_TX_PROC = 0x00000010, /* tx ISR proc */ ZYD_DEBUG_RX_PROC = 0x00000020, /* rx ISR proc */ ZYD_DEBUG_STATE = 0x00000040, /* 802.11 state transitions */ ZYD_DEBUG_STAT = 0x00000080, /* statistic */ ZYD_DEBUG_FW = 0x00000100, /* firmware */ ZYD_DEBUG_CMD = 0x00000200, /* fw commands */ ZYD_DEBUG_ANY = 0xffffffff }; #define DPRINTF(sc, m, fmt, ...) do { \ if (zyd_debug & (m)) \ printf("%s: " fmt, __func__, ## __VA_ARGS__); \ } while (0) #else #define DPRINTF(sc, m, fmt, ...) do { \ (void) sc; \ } while (0) #endif #define zyd_do_request(sc,req,data) \ usbd_do_request_flags((sc)->sc_udev, &(sc)->sc_mtx, req, data, 0, NULL, 5000) static device_probe_t zyd_match; static device_attach_t zyd_attach; static device_detach_t zyd_detach; static usb_callback_t zyd_intr_read_callback; static usb_callback_t zyd_intr_write_callback; static usb_callback_t zyd_bulk_read_callback; static usb_callback_t zyd_bulk_write_callback; static struct ieee80211vap *zyd_vap_create(struct ieee80211com *, const char [IFNAMSIZ], int, enum ieee80211_opmode, int, const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN]); static void zyd_vap_delete(struct ieee80211vap *); static void zyd_tx_free(struct zyd_tx_data *, int); static void zyd_setup_tx_list(struct zyd_softc *); static void zyd_unsetup_tx_list(struct zyd_softc *); static int zyd_newstate(struct ieee80211vap *, enum ieee80211_state, int); static int zyd_cmd(struct zyd_softc *, uint16_t, const void *, int, void *, int, int); static int zyd_read16(struct zyd_softc *, uint16_t, uint16_t *); static int zyd_read32(struct zyd_softc *, uint16_t, uint32_t *); static int zyd_write16(struct zyd_softc *, uint16_t, uint16_t); static int zyd_write32(struct zyd_softc *, uint16_t, uint32_t); static int zyd_rfwrite(struct zyd_softc *, uint32_t); static int zyd_lock_phy(struct zyd_softc *); static int zyd_unlock_phy(struct zyd_softc *); static int zyd_rf_attach(struct zyd_softc *, uint8_t); static const char *zyd_rf_name(uint8_t); static int zyd_hw_init(struct zyd_softc *); static int zyd_read_pod(struct zyd_softc *); static int zyd_read_eeprom(struct zyd_softc *); static int zyd_get_macaddr(struct zyd_softc *); static int zyd_set_macaddr(struct zyd_softc *, const uint8_t *); static int zyd_set_bssid(struct zyd_softc *, const uint8_t *); static int zyd_switch_radio(struct zyd_softc *, int); static int zyd_set_led(struct zyd_softc *, int, int); static void zyd_set_multi(struct zyd_softc *); static void zyd_update_mcast(struct ieee80211com *); static int zyd_set_rxfilter(struct zyd_softc *); static void zyd_set_chan(struct zyd_softc *, struct ieee80211_channel *); static int zyd_set_beacon_interval(struct zyd_softc *, int); static void zyd_rx_data(struct usb_xfer *, int, uint16_t); static int zyd_tx_start(struct zyd_softc *, struct mbuf *, struct ieee80211_node *); static int zyd_transmit(struct ieee80211com *, struct mbuf *); static void zyd_start(struct zyd_softc *); static int zyd_raw_xmit(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); static void zyd_parent(struct ieee80211com *); static void zyd_init_locked(struct zyd_softc *); static void zyd_stop(struct zyd_softc *); static int zyd_loadfirmware(struct zyd_softc *); static void zyd_scan_start(struct ieee80211com *); static void zyd_scan_end(struct ieee80211com *); static void zyd_getradiocaps(struct ieee80211com *, int, int *, struct ieee80211_channel[]); static void zyd_set_channel(struct ieee80211com *); static int zyd_rfmd_init(struct zyd_rf *); static int zyd_rfmd_switch_radio(struct zyd_rf *, int); static int zyd_rfmd_set_channel(struct zyd_rf *, uint8_t); static int zyd_al2230_init(struct zyd_rf *); static int zyd_al2230_switch_radio(struct zyd_rf *, int); static int zyd_al2230_set_channel(struct zyd_rf *, uint8_t); static int zyd_al2230_set_channel_b(struct zyd_rf *, uint8_t); static int zyd_al2230_init_b(struct zyd_rf *); static int zyd_al7230B_init(struct zyd_rf *); static int zyd_al7230B_switch_radio(struct zyd_rf *, int); static int zyd_al7230B_set_channel(struct zyd_rf *, uint8_t); static int zyd_al2210_init(struct zyd_rf *); static int zyd_al2210_switch_radio(struct zyd_rf *, int); static int zyd_al2210_set_channel(struct zyd_rf *, uint8_t); static int zyd_gct_init(struct zyd_rf *); static int zyd_gct_switch_radio(struct zyd_rf *, int); static int zyd_gct_set_channel(struct zyd_rf *, uint8_t); static int zyd_gct_mode(struct zyd_rf *); static int zyd_gct_set_channel_synth(struct zyd_rf *, int, int); static int zyd_gct_write(struct zyd_rf *, uint16_t); static int zyd_gct_txgain(struct zyd_rf *, uint8_t); static int zyd_maxim2_init(struct zyd_rf *); static int zyd_maxim2_switch_radio(struct zyd_rf *, int); static int zyd_maxim2_set_channel(struct zyd_rf *, uint8_t); static const struct zyd_phy_pair zyd_def_phy[] = ZYD_DEF_PHY; static const struct zyd_phy_pair zyd_def_phyB[] = ZYD_DEF_PHYB; /* various supported device vendors/products */ #define ZYD_ZD1211 0 #define ZYD_ZD1211B 1 #define ZYD_ZD1211_DEV(v,p) \ { USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, ZYD_ZD1211) } #define ZYD_ZD1211B_DEV(v,p) \ { USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, ZYD_ZD1211B) } static const STRUCT_USB_HOST_ID zyd_devs[] = { /* ZYD_ZD1211 */ ZYD_ZD1211_DEV(3COM2, 3CRUSB10075), ZYD_ZD1211_DEV(ABOCOM, WL54), ZYD_ZD1211_DEV(ASUS, WL159G), ZYD_ZD1211_DEV(CYBERTAN, TG54USB), ZYD_ZD1211_DEV(DRAYTEK, VIGOR550), ZYD_ZD1211_DEV(PLANEX2, GWUS54GD), ZYD_ZD1211_DEV(PLANEX2, GWUS54GZL), ZYD_ZD1211_DEV(PLANEX3, GWUS54GZ), ZYD_ZD1211_DEV(PLANEX3, GWUS54MINI), ZYD_ZD1211_DEV(SAGEM, XG760A), ZYD_ZD1211_DEV(SENAO, NUB8301), ZYD_ZD1211_DEV(SITECOMEU, WL113), ZYD_ZD1211_DEV(SWEEX, ZD1211), ZYD_ZD1211_DEV(TEKRAM, QUICKWLAN), ZYD_ZD1211_DEV(TEKRAM, ZD1211_1), ZYD_ZD1211_DEV(TEKRAM, ZD1211_2), ZYD_ZD1211_DEV(TWINMOS, G240), ZYD_ZD1211_DEV(UMEDIA, ALL0298V2), ZYD_ZD1211_DEV(UMEDIA, TEW429UB_A), ZYD_ZD1211_DEV(UMEDIA, TEW429UB), ZYD_ZD1211_DEV(WISTRONNEWEB, UR055G), ZYD_ZD1211_DEV(ZCOM, ZD1211), ZYD_ZD1211_DEV(ZYDAS, ZD1211), ZYD_ZD1211_DEV(ZYXEL, AG225H), ZYD_ZD1211_DEV(ZYXEL, ZYAIRG220), ZYD_ZD1211_DEV(ZYXEL, G200V2), /* ZYD_ZD1211B */ ZYD_ZD1211B_DEV(ACCTON, SMCWUSBG_NF), ZYD_ZD1211B_DEV(ACCTON, SMCWUSBG), ZYD_ZD1211B_DEV(ACCTON, ZD1211B), ZYD_ZD1211B_DEV(ASUS, A9T_WIFI), ZYD_ZD1211B_DEV(BELKIN, F5D7050_V4000), ZYD_ZD1211B_DEV(BELKIN, ZD1211B), ZYD_ZD1211B_DEV(CISCOLINKSYS, WUSBF54G), ZYD_ZD1211B_DEV(FIBERLINE, WL430U), ZYD_ZD1211B_DEV(MELCO, KG54L), ZYD_ZD1211B_DEV(PHILIPS, SNU5600), ZYD_ZD1211B_DEV(PLANEX2, GW_US54GXS), ZYD_ZD1211B_DEV(SAGEM, XG76NA), ZYD_ZD1211B_DEV(SITECOMEU, ZD1211B), ZYD_ZD1211B_DEV(UMEDIA, TEW429UBC1), ZYD_ZD1211B_DEV(USR, USR5423), ZYD_ZD1211B_DEV(VTECH, ZD1211B), ZYD_ZD1211B_DEV(ZCOM, ZD1211B), ZYD_ZD1211B_DEV(ZYDAS, ZD1211B), ZYD_ZD1211B_DEV(ZYXEL, M202), ZYD_ZD1211B_DEV(ZYXEL, G202), ZYD_ZD1211B_DEV(ZYXEL, G220V2) }; static const struct usb_config zyd_config[ZYD_N_TRANSFER] = { [ZYD_BULK_WR] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .bufsize = ZYD_MAX_TXBUFSZ, .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, .callback = zyd_bulk_write_callback, .ep_index = 0, .timeout = 10000, /* 10 seconds */ }, [ZYD_BULK_RD] = { .type = UE_BULK, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, .bufsize = ZYX_MAX_RXBUFSZ, .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, .callback = zyd_bulk_read_callback, .ep_index = 0, }, [ZYD_INTR_WR] = { .type = UE_BULK_INTR, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_OUT, .bufsize = sizeof(struct zyd_cmd), .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, .callback = zyd_intr_write_callback, .timeout = 1000, /* 1 second */ .ep_index = 1, }, [ZYD_INTR_RD] = { .type = UE_INTERRUPT, .endpoint = UE_ADDR_ANY, .direction = UE_DIR_IN, .bufsize = sizeof(struct zyd_cmd), .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, .callback = zyd_intr_read_callback, }, }; #define zyd_read16_m(sc, val, data) do { \ error = zyd_read16(sc, val, data); \ if (error != 0) \ goto fail; \ } while (0) #define zyd_write16_m(sc, val, data) do { \ error = zyd_write16(sc, val, data); \ if (error != 0) \ goto fail; \ } while (0) #define zyd_read32_m(sc, val, data) do { \ error = zyd_read32(sc, val, data); \ if (error != 0) \ goto fail; \ } while (0) #define zyd_write32_m(sc, val, data) do { \ error = zyd_write32(sc, val, data); \ if (error != 0) \ goto fail; \ } while (0) static int zyd_match(device_t dev) { struct usb_attach_arg *uaa = device_get_ivars(dev); if (uaa->usb_mode != USB_MODE_HOST) return (ENXIO); if (uaa->info.bConfigIndex != ZYD_CONFIG_INDEX) return (ENXIO); if (uaa->info.bIfaceIndex != ZYD_IFACE_INDEX) return (ENXIO); return (usbd_lookup_id_by_uaa(zyd_devs, sizeof(zyd_devs), uaa)); } static int zyd_attach(device_t dev) { struct usb_attach_arg *uaa = device_get_ivars(dev); struct zyd_softc *sc = device_get_softc(dev); struct ieee80211com *ic = &sc->sc_ic; uint8_t iface_index; int error; if (uaa->info.bcdDevice < 0x4330) { device_printf(dev, "device version mismatch: 0x%X " "(only >= 43.30 supported)\n", uaa->info.bcdDevice); return (EINVAL); } device_set_usb_desc(dev); sc->sc_dev = dev; sc->sc_udev = uaa->device; sc->sc_macrev = USB_GET_DRIVER_INFO(uaa); mtx_init(&sc->sc_mtx, device_get_nameunit(sc->sc_dev), MTX_NETWORK_LOCK, MTX_DEF); STAILQ_INIT(&sc->sc_rqh); mbufq_init(&sc->sc_snd, ifqmaxlen); iface_index = ZYD_IFACE_INDEX; error = usbd_transfer_setup(uaa->device, &iface_index, sc->sc_xfer, zyd_config, ZYD_N_TRANSFER, sc, &sc->sc_mtx); if (error) { device_printf(dev, "could not allocate USB transfers, " "err=%s\n", usbd_errstr(error)); goto detach; } ZYD_LOCK(sc); if ((error = zyd_get_macaddr(sc)) != 0) { device_printf(sc->sc_dev, "could not read EEPROM\n"); ZYD_UNLOCK(sc); goto detach; } ZYD_UNLOCK(sc); ic->ic_softc = sc; ic->ic_name = device_get_nameunit(dev); ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ ic->ic_opmode = IEEE80211_M_STA; /* set device capabilities */ ic->ic_caps = IEEE80211_C_STA /* station mode */ | IEEE80211_C_MONITOR /* monitor mode */ | IEEE80211_C_SHPREAMBLE /* short preamble supported */ | IEEE80211_C_SHSLOT /* short slot time supported */ | IEEE80211_C_BGSCAN /* capable of bg scanning */ | IEEE80211_C_WPA /* 802.11i */ ; zyd_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans, ic->ic_channels); ieee80211_ifattach(ic); ic->ic_raw_xmit = zyd_raw_xmit; ic->ic_scan_start = zyd_scan_start; ic->ic_scan_end = zyd_scan_end; ic->ic_getradiocaps = zyd_getradiocaps; ic->ic_set_channel = zyd_set_channel; ic->ic_vap_create = zyd_vap_create; ic->ic_vap_delete = zyd_vap_delete; ic->ic_update_mcast = zyd_update_mcast; ic->ic_update_promisc = zyd_update_mcast; ic->ic_parent = zyd_parent; ic->ic_transmit = zyd_transmit; ieee80211_radiotap_attach(ic, &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), ZYD_TX_RADIOTAP_PRESENT, &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), ZYD_RX_RADIOTAP_PRESENT); if (bootverbose) ieee80211_announce(ic); return (0); detach: zyd_detach(dev); return (ENXIO); /* failure */ } static void zyd_drain_mbufq(struct zyd_softc *sc) { struct mbuf *m; struct ieee80211_node *ni; ZYD_LOCK_ASSERT(sc, MA_OWNED); while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; m->m_pkthdr.rcvif = NULL; ieee80211_free_node(ni); m_freem(m); } } static int zyd_detach(device_t dev) { struct zyd_softc *sc = device_get_softc(dev); struct ieee80211com *ic = &sc->sc_ic; unsigned int x; /* * Prevent further allocations from RX/TX data * lists and ioctls: */ ZYD_LOCK(sc); sc->sc_flags |= ZYD_FLAG_DETACHED; zyd_drain_mbufq(sc); STAILQ_INIT(&sc->tx_q); STAILQ_INIT(&sc->tx_free); ZYD_UNLOCK(sc); /* drain USB transfers */ for (x = 0; x != ZYD_N_TRANSFER; x++) usbd_transfer_drain(sc->sc_xfer[x]); /* free TX list, if any */ ZYD_LOCK(sc); zyd_unsetup_tx_list(sc); ZYD_UNLOCK(sc); /* free USB transfers and some data buffers */ usbd_transfer_unsetup(sc->sc_xfer, ZYD_N_TRANSFER); if (ic->ic_softc == sc) ieee80211_ifdetach(ic); mtx_destroy(&sc->sc_mtx); return (0); } static struct ieee80211vap * zyd_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, enum ieee80211_opmode opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t mac[IEEE80211_ADDR_LEN]) { struct zyd_vap *zvp; struct ieee80211vap *vap; if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */ return (NULL); zvp = malloc(sizeof(struct zyd_vap), M_80211_VAP, M_WAITOK | M_ZERO); vap = &zvp->vap; /* enable s/w bmiss handling for sta mode */ if (ieee80211_vap_setup(ic, vap, name, unit, opmode, flags | IEEE80211_CLONE_NOBEACONS, bssid) != 0) { /* out of memory */ free(zvp, M_80211_VAP); return (NULL); } /* override state transition machine */ zvp->newstate = vap->iv_newstate; vap->iv_newstate = zyd_newstate; ieee80211_ratectl_init(vap); ieee80211_ratectl_setinterval(vap, 1000 /* 1 sec */); /* complete setup */ ieee80211_vap_attach(vap, ieee80211_media_change, ieee80211_media_status, mac); ic->ic_opmode = opmode; return (vap); } static void zyd_vap_delete(struct ieee80211vap *vap) { struct zyd_vap *zvp = ZYD_VAP(vap); ieee80211_ratectl_deinit(vap); ieee80211_vap_detach(vap); free(zvp, M_80211_VAP); } static void zyd_tx_free(struct zyd_tx_data *data, int txerr) { struct zyd_softc *sc = data->sc; if (data->m != NULL) { ieee80211_tx_complete(data->ni, data->m, txerr); data->m = NULL; data->ni = NULL; } STAILQ_INSERT_TAIL(&sc->tx_free, data, next); sc->tx_nfree++; } static void zyd_setup_tx_list(struct zyd_softc *sc) { struct zyd_tx_data *data; int i; sc->tx_nfree = 0; STAILQ_INIT(&sc->tx_q); STAILQ_INIT(&sc->tx_free); for (i = 0; i < ZYD_TX_LIST_CNT; i++) { data = &sc->tx_data[i]; data->sc = sc; STAILQ_INSERT_TAIL(&sc->tx_free, data, next); sc->tx_nfree++; } } static void zyd_unsetup_tx_list(struct zyd_softc *sc) { struct zyd_tx_data *data; int i; /* make sure any subsequent use of the queues will fail */ sc->tx_nfree = 0; STAILQ_INIT(&sc->tx_q); STAILQ_INIT(&sc->tx_free); /* free up all node references and mbufs */ for (i = 0; i < ZYD_TX_LIST_CNT; i++) { data = &sc->tx_data[i]; if (data->m != NULL) { m_freem(data->m); data->m = NULL; } if (data->ni != NULL) { ieee80211_free_node(data->ni); data->ni = NULL; } } } static int zyd_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct zyd_vap *zvp = ZYD_VAP(vap); struct ieee80211com *ic = vap->iv_ic; struct zyd_softc *sc = ic->ic_softc; int error; DPRINTF(sc, ZYD_DEBUG_STATE, "%s: %s -> %s\n", __func__, ieee80211_state_name[vap->iv_state], ieee80211_state_name[nstate]); IEEE80211_UNLOCK(ic); ZYD_LOCK(sc); switch (nstate) { case IEEE80211_S_AUTH: zyd_set_chan(sc, ic->ic_curchan); break; case IEEE80211_S_RUN: if (vap->iv_opmode == IEEE80211_M_MONITOR) break; /* turn link LED on */ error = zyd_set_led(sc, ZYD_LED1, 1); if (error != 0) break; /* make data LED blink upon Tx */ zyd_write32_m(sc, sc->sc_fwbase + ZYD_FW_LINK_STATUS, 1); IEEE80211_ADDR_COPY(sc->sc_bssid, vap->iv_bss->ni_bssid); zyd_set_bssid(sc, sc->sc_bssid); break; default: break; } fail: ZYD_UNLOCK(sc); IEEE80211_LOCK(ic); return (zvp->newstate(vap, nstate, arg)); } /* * Callback handler for interrupt transfer */ static void zyd_intr_read_callback(struct usb_xfer *xfer, usb_error_t error) { struct zyd_softc *sc = usbd_xfer_softc(xfer); struct ieee80211com *ic = &sc->sc_ic; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); struct ieee80211_node *ni; struct zyd_cmd *cmd = &sc->sc_ibuf; struct usb_page_cache *pc; int datalen; int actlen; usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: pc = usbd_xfer_get_frame(xfer, 0); usbd_copy_out(pc, 0, cmd, sizeof(*cmd)); switch (le16toh(cmd->code)) { case ZYD_NOTIF_RETRYSTATUS: { struct zyd_notif_retry *retry = (struct zyd_notif_retry *)cmd->data; DPRINTF(sc, ZYD_DEBUG_TX_PROC, "retry intr: rate=0x%x addr=%s count=%d (0x%x)\n", le16toh(retry->rate), ether_sprintf(retry->macaddr), le16toh(retry->count)&0xff, le16toh(retry->count)); /* * Find the node to which the packet was sent and * update its retry statistics. In BSS mode, this node * is the AP we're associated to so no lookup is * actually needed. */ ni = ieee80211_find_txnode(vap, retry->macaddr); if (ni != NULL) { int retrycnt = (int)(le16toh(retry->count) & 0xff); ieee80211_ratectl_tx_complete(vap, ni, IEEE80211_RATECTL_TX_FAILURE, &retrycnt, NULL); ieee80211_free_node(ni); } if (le16toh(retry->count) & 0x100) /* too many retries */ if_inc_counter(vap->iv_ifp, IFCOUNTER_OERRORS, 1); break; } case ZYD_NOTIF_IORD: { struct zyd_rq *rqp; if (le16toh(*(uint16_t *)cmd->data) == ZYD_CR_INTERRUPT) break; /* HMAC interrupt */ datalen = actlen - sizeof(cmd->code); datalen -= 2; /* XXX: padding? */ STAILQ_FOREACH(rqp, &sc->sc_rqh, rq) { int i; int count; if (rqp->olen != datalen) continue; count = rqp->olen / sizeof(struct zyd_pair); for (i = 0; i < count; i++) { if (*(((const uint16_t *)rqp->idata) + i) != (((struct zyd_pair *)cmd->data) + i)->reg) break; } if (i != count) continue; /* copy answer into caller-supplied buffer */ memcpy(rqp->odata, cmd->data, rqp->olen); DPRINTF(sc, ZYD_DEBUG_CMD, "command %p complete, data = %*D \n", rqp, rqp->olen, (char *)rqp->odata, ":"); wakeup(rqp); /* wakeup caller */ break; } if (rqp == NULL) { device_printf(sc->sc_dev, "unexpected IORD notification %*D\n", datalen, cmd->data, ":"); } break; } default: device_printf(sc->sc_dev, "unknown notification %x\n", le16toh(cmd->code)); } /* FALLTHROUGH */ case USB_ST_SETUP: tr_setup: usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); usbd_transfer_submit(xfer); break; default: /* Error */ DPRINTF(sc, ZYD_DEBUG_CMD, "error = %s\n", usbd_errstr(error)); if (error != USB_ERR_CANCELLED) { /* try to clear stall first */ usbd_xfer_set_stall(xfer); goto tr_setup; } break; } } static void zyd_intr_write_callback(struct usb_xfer *xfer, usb_error_t error) { struct zyd_softc *sc = usbd_xfer_softc(xfer); struct zyd_rq *rqp, *cmd; struct usb_page_cache *pc; switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: cmd = usbd_xfer_get_priv(xfer); DPRINTF(sc, ZYD_DEBUG_CMD, "command %p transferred\n", cmd); STAILQ_FOREACH(rqp, &sc->sc_rqh, rq) { /* Ensure the cached rq pointer is still valid */ if (rqp == cmd && (rqp->flags & ZYD_CMD_FLAG_READ) == 0) wakeup(rqp); /* wakeup caller */ } /* FALLTHROUGH */ case USB_ST_SETUP: tr_setup: STAILQ_FOREACH(rqp, &sc->sc_rqh, rq) { if (rqp->flags & ZYD_CMD_FLAG_SENT) continue; pc = usbd_xfer_get_frame(xfer, 0); usbd_copy_in(pc, 0, rqp->cmd, rqp->ilen); usbd_xfer_set_frame_len(xfer, 0, rqp->ilen); usbd_xfer_set_priv(xfer, rqp); rqp->flags |= ZYD_CMD_FLAG_SENT; usbd_transfer_submit(xfer); break; } break; default: /* Error */ DPRINTF(sc, ZYD_DEBUG_ANY, "error = %s\n", usbd_errstr(error)); if (error != USB_ERR_CANCELLED) { /* try to clear stall first */ usbd_xfer_set_stall(xfer); goto tr_setup; } break; } } static int zyd_cmd(struct zyd_softc *sc, uint16_t code, const void *idata, int ilen, void *odata, int olen, int flags) { struct zyd_cmd cmd; struct zyd_rq rq; int error; if (ilen > (int)sizeof(cmd.data)) return (EINVAL); cmd.code = htole16(code); memcpy(cmd.data, idata, ilen); DPRINTF(sc, ZYD_DEBUG_CMD, "sending cmd %p = %*D\n", &rq, ilen, idata, ":"); rq.cmd = &cmd; rq.idata = idata; rq.odata = odata; rq.ilen = sizeof(uint16_t) + ilen; rq.olen = olen; rq.flags = flags; STAILQ_INSERT_TAIL(&sc->sc_rqh, &rq, rq); usbd_transfer_start(sc->sc_xfer[ZYD_INTR_RD]); usbd_transfer_start(sc->sc_xfer[ZYD_INTR_WR]); /* wait at most one second for command reply */ error = mtx_sleep(&rq, &sc->sc_mtx, 0 , "zydcmd", hz); if (error) device_printf(sc->sc_dev, "command timeout\n"); STAILQ_REMOVE(&sc->sc_rqh, &rq, zyd_rq, rq); DPRINTF(sc, ZYD_DEBUG_CMD, "finsihed cmd %p, error = %d \n", &rq, error); return (error); } static int zyd_read16(struct zyd_softc *sc, uint16_t reg, uint16_t *val) { struct zyd_pair tmp; int error; reg = htole16(reg); error = zyd_cmd(sc, ZYD_CMD_IORD, ®, sizeof(reg), &tmp, sizeof(tmp), ZYD_CMD_FLAG_READ); if (error == 0) *val = le16toh(tmp.val); return (error); } static int zyd_read32(struct zyd_softc *sc, uint16_t reg, uint32_t *val) { struct zyd_pair tmp[2]; uint16_t regs[2]; int error; regs[0] = htole16(ZYD_REG32_HI(reg)); regs[1] = htole16(ZYD_REG32_LO(reg)); error = zyd_cmd(sc, ZYD_CMD_IORD, regs, sizeof(regs), tmp, sizeof(tmp), ZYD_CMD_FLAG_READ); if (error == 0) *val = le16toh(tmp[0].val) << 16 | le16toh(tmp[1].val); return (error); } static int zyd_write16(struct zyd_softc *sc, uint16_t reg, uint16_t val) { struct zyd_pair pair; pair.reg = htole16(reg); pair.val = htole16(val); return zyd_cmd(sc, ZYD_CMD_IOWR, &pair, sizeof(pair), NULL, 0, 0); } static int zyd_write32(struct zyd_softc *sc, uint16_t reg, uint32_t val) { struct zyd_pair pair[2]; pair[0].reg = htole16(ZYD_REG32_HI(reg)); pair[0].val = htole16(val >> 16); pair[1].reg = htole16(ZYD_REG32_LO(reg)); pair[1].val = htole16(val & 0xffff); return zyd_cmd(sc, ZYD_CMD_IOWR, pair, sizeof(pair), NULL, 0, 0); } static int zyd_rfwrite(struct zyd_softc *sc, uint32_t val) { struct zyd_rf *rf = &sc->sc_rf; struct zyd_rfwrite_cmd req; uint16_t cr203; int error, i; zyd_read16_m(sc, ZYD_CR203, &cr203); cr203 &= ~(ZYD_RF_IF_LE | ZYD_RF_CLK | ZYD_RF_DATA); req.code = htole16(2); req.width = htole16(rf->width); for (i = 0; i < rf->width; i++) { req.bit[i] = htole16(cr203); if (val & (1 << (rf->width - 1 - i))) req.bit[i] |= htole16(ZYD_RF_DATA); } error = zyd_cmd(sc, ZYD_CMD_RFCFG, &req, 4 + 2 * rf->width, NULL, 0, 0); fail: return (error); } static int zyd_rfwrite_cr(struct zyd_softc *sc, uint32_t val) { int error; zyd_write16_m(sc, ZYD_CR244, (val >> 16) & 0xff); zyd_write16_m(sc, ZYD_CR243, (val >> 8) & 0xff); zyd_write16_m(sc, ZYD_CR242, (val >> 0) & 0xff); fail: return (error); } static int zyd_lock_phy(struct zyd_softc *sc) { int error; uint32_t tmp; zyd_read32_m(sc, ZYD_MAC_MISC, &tmp); tmp &= ~ZYD_UNLOCK_PHY_REGS; zyd_write32_m(sc, ZYD_MAC_MISC, tmp); fail: return (error); } static int zyd_unlock_phy(struct zyd_softc *sc) { int error; uint32_t tmp; zyd_read32_m(sc, ZYD_MAC_MISC, &tmp); tmp |= ZYD_UNLOCK_PHY_REGS; zyd_write32_m(sc, ZYD_MAC_MISC, tmp); fail: return (error); } /* * RFMD RF methods. */ static int zyd_rfmd_init(struct zyd_rf *rf) { struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair phyini[] = ZYD_RFMD_PHY; static const uint32_t rfini[] = ZYD_RFMD_RF; int i, error; /* init RF-dependent PHY registers */ for (i = 0; i < nitems(phyini); i++) { zyd_write16_m(sc, phyini[i].reg, phyini[i].val); } /* init RFMD radio */ for (i = 0; i < nitems(rfini); i++) { if ((error = zyd_rfwrite(sc, rfini[i])) != 0) return (error); } fail: return (error); } static int zyd_rfmd_switch_radio(struct zyd_rf *rf, int on) { int error; struct zyd_softc *sc = rf->rf_sc; zyd_write16_m(sc, ZYD_CR10, on ? 0x89 : 0x15); zyd_write16_m(sc, ZYD_CR11, on ? 0x00 : 0x81); fail: return (error); } static int zyd_rfmd_set_channel(struct zyd_rf *rf, uint8_t chan) { int error; struct zyd_softc *sc = rf->rf_sc; static const struct { uint32_t r1, r2; } rfprog[] = ZYD_RFMD_CHANTABLE; error = zyd_rfwrite(sc, rfprog[chan - 1].r1); if (error != 0) goto fail; error = zyd_rfwrite(sc, rfprog[chan - 1].r2); if (error != 0) goto fail; fail: return (error); } /* * AL2230 RF methods. */ static int zyd_al2230_init(struct zyd_rf *rf) { struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair phyini[] = ZYD_AL2230_PHY; static const struct zyd_phy_pair phy2230s[] = ZYD_AL2230S_PHY_INIT; static const struct zyd_phy_pair phypll[] = { { ZYD_CR251, 0x2f }, { ZYD_CR251, 0x3f }, { ZYD_CR138, 0x28 }, { ZYD_CR203, 0x06 } }; static const uint32_t rfini1[] = ZYD_AL2230_RF_PART1; static const uint32_t rfini2[] = ZYD_AL2230_RF_PART2; static const uint32_t rfini3[] = ZYD_AL2230_RF_PART3; int i, error; /* init RF-dependent PHY registers */ for (i = 0; i < nitems(phyini); i++) zyd_write16_m(sc, phyini[i].reg, phyini[i].val); if (sc->sc_rfrev == ZYD_RF_AL2230S || sc->sc_al2230s != 0) { for (i = 0; i < nitems(phy2230s); i++) zyd_write16_m(sc, phy2230s[i].reg, phy2230s[i].val); } /* init AL2230 radio */ for (i = 0; i < nitems(rfini1); i++) { error = zyd_rfwrite(sc, rfini1[i]); if (error != 0) goto fail; } if (sc->sc_rfrev == ZYD_RF_AL2230S || sc->sc_al2230s != 0) error = zyd_rfwrite(sc, 0x000824); else error = zyd_rfwrite(sc, 0x0005a4); if (error != 0) goto fail; for (i = 0; i < nitems(rfini2); i++) { error = zyd_rfwrite(sc, rfini2[i]); if (error != 0) goto fail; } for (i = 0; i < nitems(phypll); i++) zyd_write16_m(sc, phypll[i].reg, phypll[i].val); for (i = 0; i < nitems(rfini3); i++) { error = zyd_rfwrite(sc, rfini3[i]); if (error != 0) goto fail; } fail: return (error); } static int zyd_al2230_fini(struct zyd_rf *rf) { int error, i; struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair phy[] = ZYD_AL2230_PHY_FINI_PART1; for (i = 0; i < nitems(phy); i++) zyd_write16_m(sc, phy[i].reg, phy[i].val); if (sc->sc_newphy != 0) zyd_write16_m(sc, ZYD_CR9, 0xe1); zyd_write16_m(sc, ZYD_CR203, 0x6); fail: return (error); } static int zyd_al2230_init_b(struct zyd_rf *rf) { struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair phy1[] = ZYD_AL2230_PHY_PART1; static const struct zyd_phy_pair phy2[] = ZYD_AL2230_PHY_PART2; static const struct zyd_phy_pair phy3[] = ZYD_AL2230_PHY_PART3; static const struct zyd_phy_pair phy2230s[] = ZYD_AL2230S_PHY_INIT; static const struct zyd_phy_pair phyini[] = ZYD_AL2230_PHY_B; static const uint32_t rfini_part1[] = ZYD_AL2230_RF_B_PART1; static const uint32_t rfini_part2[] = ZYD_AL2230_RF_B_PART2; static const uint32_t rfini_part3[] = ZYD_AL2230_RF_B_PART3; static const uint32_t zyd_al2230_chtable[][3] = ZYD_AL2230_CHANTABLE; int i, error; for (i = 0; i < nitems(phy1); i++) zyd_write16_m(sc, phy1[i].reg, phy1[i].val); /* init RF-dependent PHY registers */ for (i = 0; i < nitems(phyini); i++) zyd_write16_m(sc, phyini[i].reg, phyini[i].val); if (sc->sc_rfrev == ZYD_RF_AL2230S || sc->sc_al2230s != 0) { for (i = 0; i < nitems(phy2230s); i++) zyd_write16_m(sc, phy2230s[i].reg, phy2230s[i].val); } for (i = 0; i < 3; i++) { error = zyd_rfwrite_cr(sc, zyd_al2230_chtable[0][i]); if (error != 0) return (error); } for (i = 0; i < nitems(rfini_part1); i++) { error = zyd_rfwrite_cr(sc, rfini_part1[i]); if (error != 0) return (error); } if (sc->sc_rfrev == ZYD_RF_AL2230S || sc->sc_al2230s != 0) error = zyd_rfwrite(sc, 0x241000); else error = zyd_rfwrite(sc, 0x25a000); if (error != 0) goto fail; for (i = 0; i < nitems(rfini_part2); i++) { error = zyd_rfwrite_cr(sc, rfini_part2[i]); if (error != 0) return (error); } for (i = 0; i < nitems(phy2); i++) zyd_write16_m(sc, phy2[i].reg, phy2[i].val); for (i = 0; i < nitems(rfini_part3); i++) { error = zyd_rfwrite_cr(sc, rfini_part3[i]); if (error != 0) return (error); } for (i = 0; i < nitems(phy3); i++) zyd_write16_m(sc, phy3[i].reg, phy3[i].val); error = zyd_al2230_fini(rf); fail: return (error); } static int zyd_al2230_switch_radio(struct zyd_rf *rf, int on) { struct zyd_softc *sc = rf->rf_sc; int error, on251 = (sc->sc_macrev == ZYD_ZD1211) ? 0x3f : 0x7f; zyd_write16_m(sc, ZYD_CR11, on ? 0x00 : 0x04); zyd_write16_m(sc, ZYD_CR251, on ? on251 : 0x2f); fail: return (error); } static int zyd_al2230_set_channel(struct zyd_rf *rf, uint8_t chan) { int error, i; struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair phy1[] = { { ZYD_CR138, 0x28 }, { ZYD_CR203, 0x06 }, }; static const struct { uint32_t r1, r2, r3; } rfprog[] = ZYD_AL2230_CHANTABLE; error = zyd_rfwrite(sc, rfprog[chan - 1].r1); if (error != 0) goto fail; error = zyd_rfwrite(sc, rfprog[chan - 1].r2); if (error != 0) goto fail; error = zyd_rfwrite(sc, rfprog[chan - 1].r3); if (error != 0) goto fail; for (i = 0; i < nitems(phy1); i++) zyd_write16_m(sc, phy1[i].reg, phy1[i].val); fail: return (error); } static int zyd_al2230_set_channel_b(struct zyd_rf *rf, uint8_t chan) { int error, i; struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair phy1[] = ZYD_AL2230_PHY_PART1; static const struct { uint32_t r1, r2, r3; } rfprog[] = ZYD_AL2230_CHANTABLE_B; for (i = 0; i < nitems(phy1); i++) zyd_write16_m(sc, phy1[i].reg, phy1[i].val); error = zyd_rfwrite_cr(sc, rfprog[chan - 1].r1); if (error != 0) goto fail; error = zyd_rfwrite_cr(sc, rfprog[chan - 1].r2); if (error != 0) goto fail; error = zyd_rfwrite_cr(sc, rfprog[chan - 1].r3); if (error != 0) goto fail; error = zyd_al2230_fini(rf); fail: return (error); } #define ZYD_AL2230_PHY_BANDEDGE6 \ { \ { ZYD_CR128, 0x14 }, { ZYD_CR129, 0x12 }, { ZYD_CR130, 0x10 }, \ { ZYD_CR47, 0x1e } \ } static int zyd_al2230_bandedge6(struct zyd_rf *rf, struct ieee80211_channel *c) { int error = 0, i; struct zyd_softc *sc = rf->rf_sc; struct ieee80211com *ic = &sc->sc_ic; struct zyd_phy_pair r[] = ZYD_AL2230_PHY_BANDEDGE6; int chan = ieee80211_chan2ieee(ic, c); if (chan == 1 || chan == 11) r[0].val = 0x12; for (i = 0; i < nitems(r); i++) zyd_write16_m(sc, r[i].reg, r[i].val); fail: return (error); } /* * AL7230B RF methods. */ static int zyd_al7230B_init(struct zyd_rf *rf) { struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair phyini_1[] = ZYD_AL7230B_PHY_1; static const struct zyd_phy_pair phyini_2[] = ZYD_AL7230B_PHY_2; static const struct zyd_phy_pair phyini_3[] = ZYD_AL7230B_PHY_3; static const uint32_t rfini_1[] = ZYD_AL7230B_RF_1; static const uint32_t rfini_2[] = ZYD_AL7230B_RF_2; int i, error; /* for AL7230B, PHY and RF need to be initialized in "phases" */ /* init RF-dependent PHY registers, part one */ for (i = 0; i < nitems(phyini_1); i++) zyd_write16_m(sc, phyini_1[i].reg, phyini_1[i].val); /* init AL7230B radio, part one */ for (i = 0; i < nitems(rfini_1); i++) { if ((error = zyd_rfwrite(sc, rfini_1[i])) != 0) return (error); } /* init RF-dependent PHY registers, part two */ for (i = 0; i < nitems(phyini_2); i++) zyd_write16_m(sc, phyini_2[i].reg, phyini_2[i].val); /* init AL7230B radio, part two */ for (i = 0; i < nitems(rfini_2); i++) { if ((error = zyd_rfwrite(sc, rfini_2[i])) != 0) return (error); } /* init RF-dependent PHY registers, part three */ for (i = 0; i < nitems(phyini_3); i++) zyd_write16_m(sc, phyini_3[i].reg, phyini_3[i].val); fail: return (error); } static int zyd_al7230B_switch_radio(struct zyd_rf *rf, int on) { int error; struct zyd_softc *sc = rf->rf_sc; zyd_write16_m(sc, ZYD_CR11, on ? 0x00 : 0x04); zyd_write16_m(sc, ZYD_CR251, on ? 0x3f : 0x2f); fail: return (error); } static int zyd_al7230B_set_channel(struct zyd_rf *rf, uint8_t chan) { struct zyd_softc *sc = rf->rf_sc; static const struct { uint32_t r1, r2; } rfprog[] = ZYD_AL7230B_CHANTABLE; static const uint32_t rfsc[] = ZYD_AL7230B_RF_SETCHANNEL; int i, error; zyd_write16_m(sc, ZYD_CR240, 0x57); zyd_write16_m(sc, ZYD_CR251, 0x2f); for (i = 0; i < nitems(rfsc); i++) { if ((error = zyd_rfwrite(sc, rfsc[i])) != 0) return (error); } zyd_write16_m(sc, ZYD_CR128, 0x14); zyd_write16_m(sc, ZYD_CR129, 0x12); zyd_write16_m(sc, ZYD_CR130, 0x10); zyd_write16_m(sc, ZYD_CR38, 0x38); zyd_write16_m(sc, ZYD_CR136, 0xdf); error = zyd_rfwrite(sc, rfprog[chan - 1].r1); if (error != 0) goto fail; error = zyd_rfwrite(sc, rfprog[chan - 1].r2); if (error != 0) goto fail; error = zyd_rfwrite(sc, 0x3c9000); if (error != 0) goto fail; zyd_write16_m(sc, ZYD_CR251, 0x3f); zyd_write16_m(sc, ZYD_CR203, 0x06); zyd_write16_m(sc, ZYD_CR240, 0x08); fail: return (error); } /* * AL2210 RF methods. */ static int zyd_al2210_init(struct zyd_rf *rf) { struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair phyini[] = ZYD_AL2210_PHY; static const uint32_t rfini[] = ZYD_AL2210_RF; uint32_t tmp; int i, error; zyd_write32_m(sc, ZYD_CR18, 2); /* init RF-dependent PHY registers */ for (i = 0; i < nitems(phyini); i++) zyd_write16_m(sc, phyini[i].reg, phyini[i].val); /* init AL2210 radio */ for (i = 0; i < nitems(rfini); i++) { if ((error = zyd_rfwrite(sc, rfini[i])) != 0) return (error); } zyd_write16_m(sc, ZYD_CR47, 0x1e); zyd_read32_m(sc, ZYD_CR_RADIO_PD, &tmp); zyd_write32_m(sc, ZYD_CR_RADIO_PD, tmp & ~1); zyd_write32_m(sc, ZYD_CR_RADIO_PD, tmp | 1); zyd_write32_m(sc, ZYD_CR_RFCFG, 0x05); zyd_write32_m(sc, ZYD_CR_RFCFG, 0x00); zyd_write16_m(sc, ZYD_CR47, 0x1e); zyd_write32_m(sc, ZYD_CR18, 3); fail: return (error); } static int zyd_al2210_switch_radio(struct zyd_rf *rf, int on) { /* vendor driver does nothing for this RF chip */ return (0); } static int zyd_al2210_set_channel(struct zyd_rf *rf, uint8_t chan) { int error; struct zyd_softc *sc = rf->rf_sc; static const uint32_t rfprog[] = ZYD_AL2210_CHANTABLE; uint32_t tmp; zyd_write32_m(sc, ZYD_CR18, 2); zyd_write16_m(sc, ZYD_CR47, 0x1e); zyd_read32_m(sc, ZYD_CR_RADIO_PD, &tmp); zyd_write32_m(sc, ZYD_CR_RADIO_PD, tmp & ~1); zyd_write32_m(sc, ZYD_CR_RADIO_PD, tmp | 1); zyd_write32_m(sc, ZYD_CR_RFCFG, 0x05); zyd_write32_m(sc, ZYD_CR_RFCFG, 0x00); zyd_write16_m(sc, ZYD_CR47, 0x1e); /* actually set the channel */ error = zyd_rfwrite(sc, rfprog[chan - 1]); if (error != 0) goto fail; zyd_write32_m(sc, ZYD_CR18, 3); fail: return (error); } /* * GCT RF methods. */ static int zyd_gct_init(struct zyd_rf *rf) { #define ZYD_GCT_INTR_REG 0x85c1 struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair phyini[] = ZYD_GCT_PHY; static const uint32_t rfini[] = ZYD_GCT_RF; static const uint16_t vco[11][7] = ZYD_GCT_VCO; int i, idx = -1, error; uint16_t data; /* init RF-dependent PHY registers */ for (i = 0; i < nitems(phyini); i++) zyd_write16_m(sc, phyini[i].reg, phyini[i].val); /* init cgt radio */ for (i = 0; i < nitems(rfini); i++) { if ((error = zyd_rfwrite(sc, rfini[i])) != 0) return (error); } error = zyd_gct_mode(rf); if (error != 0) return (error); for (i = 0; i < (int)(nitems(vco) - 1); i++) { error = zyd_gct_set_channel_synth(rf, 1, 0); if (error != 0) goto fail; error = zyd_gct_write(rf, vco[i][0]); if (error != 0) goto fail; zyd_write16_m(sc, ZYD_GCT_INTR_REG, 0xf); zyd_read16_m(sc, ZYD_GCT_INTR_REG, &data); if ((data & 0xf) == 0) { idx = i; break; } } if (idx == -1) { error = zyd_gct_set_channel_synth(rf, 1, 1); if (error != 0) goto fail; error = zyd_gct_write(rf, 0x6662); if (error != 0) goto fail; } rf->idx = idx; zyd_write16_m(sc, ZYD_CR203, 0x6); fail: return (error); #undef ZYD_GCT_INTR_REG } static int zyd_gct_mode(struct zyd_rf *rf) { struct zyd_softc *sc = rf->rf_sc; static const uint32_t mode[] = { 0x25f98, 0x25f9a, 0x25f94, 0x27fd4 }; int i, error; for (i = 0; i < nitems(mode); i++) { if ((error = zyd_rfwrite(sc, mode[i])) != 0) break; } return (error); } static int zyd_gct_set_channel_synth(struct zyd_rf *rf, int chan, int acal) { int error, idx = chan - 1; struct zyd_softc *sc = rf->rf_sc; static uint32_t acal_synth[] = ZYD_GCT_CHANNEL_ACAL; static uint32_t std_synth[] = ZYD_GCT_CHANNEL_STD; static uint32_t div_synth[] = ZYD_GCT_CHANNEL_DIV; error = zyd_rfwrite(sc, (acal == 1) ? acal_synth[idx] : std_synth[idx]); if (error != 0) return (error); return zyd_rfwrite(sc, div_synth[idx]); } static int zyd_gct_write(struct zyd_rf *rf, uint16_t value) { struct zyd_softc *sc = rf->rf_sc; return zyd_rfwrite(sc, 0x300000 | 0x40000 | value); } static int zyd_gct_switch_radio(struct zyd_rf *rf, int on) { int error; struct zyd_softc *sc = rf->rf_sc; error = zyd_rfwrite(sc, on ? 0x25f94 : 0x25f90); if (error != 0) return (error); zyd_write16_m(sc, ZYD_CR11, on ? 0x00 : 0x04); zyd_write16_m(sc, ZYD_CR251, on ? ((sc->sc_macrev == ZYD_ZD1211B) ? 0x7f : 0x3f) : 0x2f); fail: return (error); } static int zyd_gct_set_channel(struct zyd_rf *rf, uint8_t chan) { int error, i; struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair cmd[] = { { ZYD_CR80, 0x30 }, { ZYD_CR81, 0x30 }, { ZYD_CR79, 0x58 }, { ZYD_CR12, 0xf0 }, { ZYD_CR77, 0x1b }, { ZYD_CR78, 0x58 }, }; static const uint16_t vco[11][7] = ZYD_GCT_VCO; error = zyd_gct_set_channel_synth(rf, chan, 0); if (error != 0) goto fail; error = zyd_gct_write(rf, (rf->idx == -1) ? 0x6662 : vco[rf->idx][((chan - 1) / 2)]); if (error != 0) goto fail; error = zyd_gct_mode(rf); if (error != 0) return (error); for (i = 0; i < nitems(cmd); i++) zyd_write16_m(sc, cmd[i].reg, cmd[i].val); error = zyd_gct_txgain(rf, chan); if (error != 0) return (error); zyd_write16_m(sc, ZYD_CR203, 0x6); fail: return (error); } static int zyd_gct_txgain(struct zyd_rf *rf, uint8_t chan) { struct zyd_softc *sc = rf->rf_sc; static uint32_t txgain[] = ZYD_GCT_TXGAIN; uint8_t idx = sc->sc_pwrint[chan - 1]; if (idx >= nitems(txgain)) { device_printf(sc->sc_dev, "could not set TX gain (%d %#x)\n", chan, idx); return 0; } return zyd_rfwrite(sc, 0x700000 | txgain[idx]); } /* * Maxim2 RF methods. */ static int zyd_maxim2_init(struct zyd_rf *rf) { struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair phyini[] = ZYD_MAXIM2_PHY; static const uint32_t rfini[] = ZYD_MAXIM2_RF; uint16_t tmp; int i, error; /* init RF-dependent PHY registers */ for (i = 0; i < nitems(phyini); i++) zyd_write16_m(sc, phyini[i].reg, phyini[i].val); zyd_read16_m(sc, ZYD_CR203, &tmp); zyd_write16_m(sc, ZYD_CR203, tmp & ~(1 << 4)); /* init maxim2 radio */ for (i = 0; i < nitems(rfini); i++) { if ((error = zyd_rfwrite(sc, rfini[i])) != 0) return (error); } zyd_read16_m(sc, ZYD_CR203, &tmp); zyd_write16_m(sc, ZYD_CR203, tmp | (1 << 4)); fail: return (error); } static int zyd_maxim2_switch_radio(struct zyd_rf *rf, int on) { /* vendor driver does nothing for this RF chip */ return (0); } static int zyd_maxim2_set_channel(struct zyd_rf *rf, uint8_t chan) { struct zyd_softc *sc = rf->rf_sc; static const struct zyd_phy_pair phyini[] = ZYD_MAXIM2_PHY; static const uint32_t rfini[] = ZYD_MAXIM2_RF; static const struct { uint32_t r1, r2; } rfprog[] = ZYD_MAXIM2_CHANTABLE; uint16_t tmp; int i, error; /* * Do the same as we do when initializing it, except for the channel * values coming from the two channel tables. */ /* init RF-dependent PHY registers */ for (i = 0; i < nitems(phyini); i++) zyd_write16_m(sc, phyini[i].reg, phyini[i].val); zyd_read16_m(sc, ZYD_CR203, &tmp); zyd_write16_m(sc, ZYD_CR203, tmp & ~(1 << 4)); /* first two values taken from the chantables */ error = zyd_rfwrite(sc, rfprog[chan - 1].r1); if (error != 0) goto fail; error = zyd_rfwrite(sc, rfprog[chan - 1].r2); if (error != 0) goto fail; /* init maxim2 radio - skipping the two first values */ for (i = 2; i < nitems(rfini); i++) { if ((error = zyd_rfwrite(sc, rfini[i])) != 0) return (error); } zyd_read16_m(sc, ZYD_CR203, &tmp); zyd_write16_m(sc, ZYD_CR203, tmp | (1 << 4)); fail: return (error); } static int zyd_rf_attach(struct zyd_softc *sc, uint8_t type) { struct zyd_rf *rf = &sc->sc_rf; rf->rf_sc = sc; rf->update_pwr = 1; switch (type) { case ZYD_RF_RFMD: rf->init = zyd_rfmd_init; rf->switch_radio = zyd_rfmd_switch_radio; rf->set_channel = zyd_rfmd_set_channel; rf->width = 24; /* 24-bit RF values */ break; case ZYD_RF_AL2230: case ZYD_RF_AL2230S: if (sc->sc_macrev == ZYD_ZD1211B) { rf->init = zyd_al2230_init_b; rf->set_channel = zyd_al2230_set_channel_b; } else { rf->init = zyd_al2230_init; rf->set_channel = zyd_al2230_set_channel; } rf->switch_radio = zyd_al2230_switch_radio; rf->bandedge6 = zyd_al2230_bandedge6; rf->width = 24; /* 24-bit RF values */ break; case ZYD_RF_AL7230B: rf->init = zyd_al7230B_init; rf->switch_radio = zyd_al7230B_switch_radio; rf->set_channel = zyd_al7230B_set_channel; rf->width = 24; /* 24-bit RF values */ break; case ZYD_RF_AL2210: rf->init = zyd_al2210_init; rf->switch_radio = zyd_al2210_switch_radio; rf->set_channel = zyd_al2210_set_channel; rf->width = 24; /* 24-bit RF values */ break; case ZYD_RF_MAXIM_NEW: case ZYD_RF_GCT: rf->init = zyd_gct_init; rf->switch_radio = zyd_gct_switch_radio; rf->set_channel = zyd_gct_set_channel; rf->width = 24; /* 24-bit RF values */ rf->update_pwr = 0; break; case ZYD_RF_MAXIM_NEW2: rf->init = zyd_maxim2_init; rf->switch_radio = zyd_maxim2_switch_radio; rf->set_channel = zyd_maxim2_set_channel; rf->width = 18; /* 18-bit RF values */ break; default: device_printf(sc->sc_dev, "sorry, radio \"%s\" is not supported yet\n", zyd_rf_name(type)); return (EINVAL); } return (0); } static const char * zyd_rf_name(uint8_t type) { static const char * const zyd_rfs[] = { "unknown", "unknown", "UW2451", "UCHIP", "AL2230", "AL7230B", "THETA", "AL2210", "MAXIM_NEW", "GCT", "AL2230S", "RALINK", "INTERSIL", "RFMD", "MAXIM_NEW2", "PHILIPS" }; return zyd_rfs[(type > 15) ? 0 : type]; } static int zyd_hw_init(struct zyd_softc *sc) { int error; const struct zyd_phy_pair *phyp; struct zyd_rf *rf = &sc->sc_rf; uint16_t val; /* specify that the plug and play is finished */ zyd_write32_m(sc, ZYD_MAC_AFTER_PNP, 1); zyd_read16_m(sc, ZYD_FIRMWARE_BASE_ADDR, &sc->sc_fwbase); DPRINTF(sc, ZYD_DEBUG_FW, "firmware base address=0x%04x\n", sc->sc_fwbase); /* retrieve firmware revision number */ zyd_read16_m(sc, sc->sc_fwbase + ZYD_FW_FIRMWARE_REV, &sc->sc_fwrev); zyd_write32_m(sc, ZYD_CR_GPI_EN, 0); zyd_write32_m(sc, ZYD_MAC_CONT_WIN_LIMIT, 0x7f043f); /* set mandatory rates - XXX assumes 802.11b/g */ zyd_write32_m(sc, ZYD_MAC_MAN_RATE, 0x150f); /* disable interrupts */ zyd_write32_m(sc, ZYD_CR_INTERRUPT, 0); if ((error = zyd_read_pod(sc)) != 0) { device_printf(sc->sc_dev, "could not read EEPROM\n"); goto fail; } /* PHY init (resetting) */ error = zyd_lock_phy(sc); if (error != 0) goto fail; phyp = (sc->sc_macrev == ZYD_ZD1211B) ? zyd_def_phyB : zyd_def_phy; for (; phyp->reg != 0; phyp++) zyd_write16_m(sc, phyp->reg, phyp->val); if (sc->sc_macrev == ZYD_ZD1211 && sc->sc_fix_cr157 != 0) { zyd_read16_m(sc, ZYD_EEPROM_PHY_REG, &val); zyd_write32_m(sc, ZYD_CR157, val >> 8); } error = zyd_unlock_phy(sc); if (error != 0) goto fail; /* HMAC init */ zyd_write32_m(sc, ZYD_MAC_ACK_EXT, 0x00000020); zyd_write32_m(sc, ZYD_CR_ADDA_MBIAS_WT, 0x30000808); zyd_write32_m(sc, ZYD_MAC_SNIFFER, 0x00000000); zyd_write32_m(sc, ZYD_MAC_RXFILTER, 0x00000000); zyd_write32_m(sc, ZYD_MAC_GHTBL, 0x00000000); zyd_write32_m(sc, ZYD_MAC_GHTBH, 0x80000000); zyd_write32_m(sc, ZYD_MAC_MISC, 0x000000a4); zyd_write32_m(sc, ZYD_CR_ADDA_PWR_DWN, 0x0000007f); zyd_write32_m(sc, ZYD_MAC_BCNCFG, 0x00f00401); zyd_write32_m(sc, ZYD_MAC_PHY_DELAY2, 0x00000000); zyd_write32_m(sc, ZYD_MAC_ACK_EXT, 0x00000080); zyd_write32_m(sc, ZYD_CR_ADDA_PWR_DWN, 0x00000000); zyd_write32_m(sc, ZYD_MAC_SIFS_ACK_TIME, 0x00000100); zyd_write32_m(sc, ZYD_CR_RX_PE_DELAY, 0x00000070); zyd_write32_m(sc, ZYD_CR_PS_CTRL, 0x10000000); zyd_write32_m(sc, ZYD_MAC_RTSCTSRATE, 0x02030203); zyd_write32_m(sc, ZYD_MAC_AFTER_PNP, 1); zyd_write32_m(sc, ZYD_MAC_BACKOFF_PROTECT, 0x00000114); zyd_write32_m(sc, ZYD_MAC_DIFS_EIFS_SIFS, 0x0a47c032); zyd_write32_m(sc, ZYD_MAC_CAM_MODE, 0x3); if (sc->sc_macrev == ZYD_ZD1211) { zyd_write32_m(sc, ZYD_MAC_RETRY, 0x00000002); zyd_write32_m(sc, ZYD_MAC_RX_THRESHOLD, 0x000c0640); } else { zyd_write32_m(sc, ZYD_MACB_MAX_RETRY, 0x02020202); zyd_write32_m(sc, ZYD_MACB_TXPWR_CTL4, 0x007f003f); zyd_write32_m(sc, ZYD_MACB_TXPWR_CTL3, 0x007f003f); zyd_write32_m(sc, ZYD_MACB_TXPWR_CTL2, 0x003f001f); zyd_write32_m(sc, ZYD_MACB_TXPWR_CTL1, 0x001f000f); zyd_write32_m(sc, ZYD_MACB_AIFS_CTL1, 0x00280028); zyd_write32_m(sc, ZYD_MACB_AIFS_CTL2, 0x008C003C); zyd_write32_m(sc, ZYD_MACB_TXOP, 0x01800824); zyd_write32_m(sc, ZYD_MAC_RX_THRESHOLD, 0x000c0eff); } /* init beacon interval to 100ms */ if ((error = zyd_set_beacon_interval(sc, 100)) != 0) goto fail; if ((error = zyd_rf_attach(sc, sc->sc_rfrev)) != 0) { device_printf(sc->sc_dev, "could not attach RF, rev 0x%x\n", sc->sc_rfrev); goto fail; } /* RF chip init */ error = zyd_lock_phy(sc); if (error != 0) goto fail; error = (*rf->init)(rf); if (error != 0) { device_printf(sc->sc_dev, "radio initialization failed, error %d\n", error); goto fail; } error = zyd_unlock_phy(sc); if (error != 0) goto fail; if ((error = zyd_read_eeprom(sc)) != 0) { device_printf(sc->sc_dev, "could not read EEPROM\n"); goto fail; } fail: return (error); } static int zyd_read_pod(struct zyd_softc *sc) { int error; uint32_t tmp; zyd_read32_m(sc, ZYD_EEPROM_POD, &tmp); sc->sc_rfrev = tmp & 0x0f; sc->sc_ledtype = (tmp >> 4) & 0x01; sc->sc_al2230s = (tmp >> 7) & 0x01; sc->sc_cckgain = (tmp >> 8) & 0x01; sc->sc_fix_cr157 = (tmp >> 13) & 0x01; sc->sc_parev = (tmp >> 16) & 0x0f; sc->sc_bandedge6 = (tmp >> 21) & 0x01; sc->sc_newphy = (tmp >> 31) & 0x01; sc->sc_txled = ((tmp & (1 << 24)) && (tmp & (1 << 29))) ? 0 : 1; fail: return (error); } static int zyd_read_eeprom(struct zyd_softc *sc) { uint16_t val; int error, i; /* read Tx power calibration tables */ for (i = 0; i < 7; i++) { zyd_read16_m(sc, ZYD_EEPROM_PWR_CAL + i, &val); sc->sc_pwrcal[i * 2] = val >> 8; sc->sc_pwrcal[i * 2 + 1] = val & 0xff; zyd_read16_m(sc, ZYD_EEPROM_PWR_INT + i, &val); sc->sc_pwrint[i * 2] = val >> 8; sc->sc_pwrint[i * 2 + 1] = val & 0xff; zyd_read16_m(sc, ZYD_EEPROM_36M_CAL + i, &val); sc->sc_ofdm36_cal[i * 2] = val >> 8; sc->sc_ofdm36_cal[i * 2 + 1] = val & 0xff; zyd_read16_m(sc, ZYD_EEPROM_48M_CAL + i, &val); sc->sc_ofdm48_cal[i * 2] = val >> 8; sc->sc_ofdm48_cal[i * 2 + 1] = val & 0xff; zyd_read16_m(sc, ZYD_EEPROM_54M_CAL + i, &val); sc->sc_ofdm54_cal[i * 2] = val >> 8; sc->sc_ofdm54_cal[i * 2 + 1] = val & 0xff; } fail: return (error); } static int zyd_get_macaddr(struct zyd_softc *sc) { struct usb_device_request req; usb_error_t error; req.bmRequestType = UT_READ_VENDOR_DEVICE; req.bRequest = ZYD_READFWDATAREQ; USETW(req.wValue, ZYD_EEPROM_MAC_ADDR_P1); USETW(req.wIndex, 0); USETW(req.wLength, IEEE80211_ADDR_LEN); error = zyd_do_request(sc, &req, sc->sc_ic.ic_macaddr); if (error != 0) { device_printf(sc->sc_dev, "could not read EEPROM: %s\n", usbd_errstr(error)); } return (error); } static int zyd_set_macaddr(struct zyd_softc *sc, const uint8_t *addr) { int error; uint32_t tmp; tmp = addr[3] << 24 | addr[2] << 16 | addr[1] << 8 | addr[0]; zyd_write32_m(sc, ZYD_MAC_MACADRL, tmp); tmp = addr[5] << 8 | addr[4]; zyd_write32_m(sc, ZYD_MAC_MACADRH, tmp); fail: return (error); } static int zyd_set_bssid(struct zyd_softc *sc, const uint8_t *addr) { int error; uint32_t tmp; tmp = addr[3] << 24 | addr[2] << 16 | addr[1] << 8 | addr[0]; zyd_write32_m(sc, ZYD_MAC_BSSADRL, tmp); tmp = addr[5] << 8 | addr[4]; zyd_write32_m(sc, ZYD_MAC_BSSADRH, tmp); fail: return (error); } static int zyd_switch_radio(struct zyd_softc *sc, int on) { struct zyd_rf *rf = &sc->sc_rf; int error; error = zyd_lock_phy(sc); if (error != 0) goto fail; error = (*rf->switch_radio)(rf, on); if (error != 0) goto fail; error = zyd_unlock_phy(sc); fail: return (error); } static int zyd_set_led(struct zyd_softc *sc, int which, int on) { int error; uint32_t tmp; zyd_read32_m(sc, ZYD_MAC_TX_PE_CONTROL, &tmp); tmp &= ~which; if (on) tmp |= which; zyd_write32_m(sc, ZYD_MAC_TX_PE_CONTROL, tmp); fail: return (error); } static void zyd_set_multi(struct zyd_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; uint32_t low, high; int error; if ((sc->sc_flags & ZYD_FLAG_RUNNING) == 0) return; low = 0x00000000; high = 0x80000000; if (ic->ic_opmode == IEEE80211_M_MONITOR || ic->ic_allmulti > 0 || ic->ic_promisc > 0) { low = 0xffffffff; high = 0xffffffff; } else { struct ieee80211vap *vap; struct ifnet *ifp; struct ifmultiaddr *ifma; uint8_t v; TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { ifp = vap->iv_ifp; if_maddr_rlock(ifp); TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { if (ifma->ifma_addr->sa_family != AF_LINK) continue; v = ((uint8_t *)LLADDR((struct sockaddr_dl *) ifma->ifma_addr))[5] >> 2; if (v < 32) low |= 1 << v; else high |= 1 << (v - 32); } if_maddr_runlock(ifp); } } /* reprogram multicast global hash table */ zyd_write32_m(sc, ZYD_MAC_GHTBL, low); zyd_write32_m(sc, ZYD_MAC_GHTBH, high); fail: if (error != 0) device_printf(sc->sc_dev, "could not set multicast hash table\n"); } static void zyd_update_mcast(struct ieee80211com *ic) { struct zyd_softc *sc = ic->ic_softc; ZYD_LOCK(sc); zyd_set_multi(sc); ZYD_UNLOCK(sc); } static int zyd_set_rxfilter(struct zyd_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; uint32_t rxfilter; switch (ic->ic_opmode) { case IEEE80211_M_STA: rxfilter = ZYD_FILTER_BSS; break; case IEEE80211_M_IBSS: case IEEE80211_M_HOSTAP: rxfilter = ZYD_FILTER_HOSTAP; break; case IEEE80211_M_MONITOR: rxfilter = ZYD_FILTER_MONITOR; break; default: /* should not get there */ return (EINVAL); } return zyd_write32(sc, ZYD_MAC_RXFILTER, rxfilter); } static void zyd_set_chan(struct zyd_softc *sc, struct ieee80211_channel *c) { int error; struct ieee80211com *ic = &sc->sc_ic; struct zyd_rf *rf = &sc->sc_rf; uint32_t tmp; int chan; chan = ieee80211_chan2ieee(ic, c); if (chan == 0 || chan == IEEE80211_CHAN_ANY) { /* XXX should NEVER happen */ device_printf(sc->sc_dev, "%s: invalid channel %x\n", __func__, chan); return; } error = zyd_lock_phy(sc); if (error != 0) goto fail; error = (*rf->set_channel)(rf, chan); if (error != 0) goto fail; if (rf->update_pwr) { /* update Tx power */ zyd_write16_m(sc, ZYD_CR31, sc->sc_pwrint[chan - 1]); if (sc->sc_macrev == ZYD_ZD1211B) { zyd_write16_m(sc, ZYD_CR67, sc->sc_ofdm36_cal[chan - 1]); zyd_write16_m(sc, ZYD_CR66, sc->sc_ofdm48_cal[chan - 1]); zyd_write16_m(sc, ZYD_CR65, sc->sc_ofdm54_cal[chan - 1]); zyd_write16_m(sc, ZYD_CR68, sc->sc_pwrcal[chan - 1]); zyd_write16_m(sc, ZYD_CR69, 0x28); zyd_write16_m(sc, ZYD_CR69, 0x2a); } } if (sc->sc_cckgain) { /* set CCK baseband gain from EEPROM */ if (zyd_read32(sc, ZYD_EEPROM_PHY_REG, &tmp) == 0) zyd_write16_m(sc, ZYD_CR47, tmp & 0xff); } if (sc->sc_bandedge6 && rf->bandedge6 != NULL) { error = (*rf->bandedge6)(rf, c); if (error != 0) goto fail; } zyd_write32_m(sc, ZYD_CR_CONFIG_PHILIPS, 0); error = zyd_unlock_phy(sc); if (error != 0) goto fail; sc->sc_rxtap.wr_chan_freq = sc->sc_txtap.wt_chan_freq = htole16(c->ic_freq); sc->sc_rxtap.wr_chan_flags = sc->sc_txtap.wt_chan_flags = htole16(c->ic_flags); fail: return; } static int zyd_set_beacon_interval(struct zyd_softc *sc, int bintval) { int error; uint32_t val; zyd_read32_m(sc, ZYD_CR_ATIM_WND_PERIOD, &val); sc->sc_atim_wnd = val; zyd_read32_m(sc, ZYD_CR_PRE_TBTT, &val); sc->sc_pre_tbtt = val; sc->sc_bcn_int = bintval; if (sc->sc_bcn_int <= 5) sc->sc_bcn_int = 5; if (sc->sc_pre_tbtt < 4 || sc->sc_pre_tbtt >= sc->sc_bcn_int) sc->sc_pre_tbtt = sc->sc_bcn_int - 1; if (sc->sc_atim_wnd >= sc->sc_pre_tbtt) sc->sc_atim_wnd = sc->sc_pre_tbtt - 1; zyd_write32_m(sc, ZYD_CR_ATIM_WND_PERIOD, sc->sc_atim_wnd); zyd_write32_m(sc, ZYD_CR_PRE_TBTT, sc->sc_pre_tbtt); zyd_write32_m(sc, ZYD_CR_BCN_INTERVAL, sc->sc_bcn_int); fail: return (error); } static void zyd_rx_data(struct usb_xfer *xfer, int offset, uint16_t len) { struct zyd_softc *sc = usbd_xfer_softc(xfer); struct ieee80211com *ic = &sc->sc_ic; struct zyd_plcphdr plcp; struct zyd_rx_stat stat; struct usb_page_cache *pc; struct mbuf *m; int rlen, rssi; if (len < ZYD_MIN_FRAGSZ) { DPRINTF(sc, ZYD_DEBUG_RECV, "%s: frame too short (length=%d)\n", device_get_nameunit(sc->sc_dev), len); counter_u64_add(ic->ic_ierrors, 1); return; } pc = usbd_xfer_get_frame(xfer, 0); usbd_copy_out(pc, offset, &plcp, sizeof(plcp)); usbd_copy_out(pc, offset + len - sizeof(stat), &stat, sizeof(stat)); if (stat.flags & ZYD_RX_ERROR) { DPRINTF(sc, ZYD_DEBUG_RECV, "%s: RX status indicated error (%x)\n", device_get_nameunit(sc->sc_dev), stat.flags); counter_u64_add(ic->ic_ierrors, 1); return; } /* compute actual frame length */ rlen = len - sizeof(struct zyd_plcphdr) - sizeof(struct zyd_rx_stat) - IEEE80211_CRC_LEN; /* allocate a mbuf to store the frame */ if (rlen > (int)MCLBYTES) { DPRINTF(sc, ZYD_DEBUG_RECV, "%s: frame too long (length=%d)\n", device_get_nameunit(sc->sc_dev), rlen); counter_u64_add(ic->ic_ierrors, 1); return; } else if (rlen > (int)MHLEN) m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); else m = m_gethdr(M_NOWAIT, MT_DATA); if (m == NULL) { DPRINTF(sc, ZYD_DEBUG_RECV, "%s: could not allocate rx mbuf\n", device_get_nameunit(sc->sc_dev)); counter_u64_add(ic->ic_ierrors, 1); return; } m->m_pkthdr.len = m->m_len = rlen; usbd_copy_out(pc, offset + sizeof(plcp), mtod(m, uint8_t *), rlen); if (ieee80211_radiotap_active(ic)) { struct zyd_rx_radiotap_header *tap = &sc->sc_rxtap; tap->wr_flags = 0; if (stat.flags & (ZYD_RX_BADCRC16 | ZYD_RX_BADCRC32)) tap->wr_flags |= IEEE80211_RADIOTAP_F_BADFCS; /* XXX toss, no way to express errors */ if (stat.flags & ZYD_RX_DECRYPTERR) tap->wr_flags |= IEEE80211_RADIOTAP_F_BADFCS; tap->wr_rate = ieee80211_plcp2rate(plcp.signal, (stat.flags & ZYD_RX_OFDM) ? IEEE80211_T_OFDM : IEEE80211_T_CCK); tap->wr_antsignal = stat.rssi + -95; tap->wr_antnoise = -95; /* XXX */ } rssi = (stat.rssi > 63) ? 127 : 2 * stat.rssi; sc->sc_rx_data[sc->sc_rx_count].rssi = rssi; sc->sc_rx_data[sc->sc_rx_count].m = m; sc->sc_rx_count++; } static void zyd_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error) { struct zyd_softc *sc = usbd_xfer_softc(xfer); struct ieee80211com *ic = &sc->sc_ic; struct ieee80211_node *ni; struct zyd_rx_desc desc; struct mbuf *m; struct usb_page_cache *pc; uint32_t offset; uint8_t rssi; int8_t nf; int i; int actlen; usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); sc->sc_rx_count = 0; switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: pc = usbd_xfer_get_frame(xfer, 0); usbd_copy_out(pc, actlen - sizeof(desc), &desc, sizeof(desc)); offset = 0; if (UGETW(desc.tag) == ZYD_TAG_MULTIFRAME) { DPRINTF(sc, ZYD_DEBUG_RECV, "%s: received multi-frame transfer\n", __func__); for (i = 0; i < ZYD_MAX_RXFRAMECNT; i++) { uint16_t len16 = UGETW(desc.len[i]); if (len16 == 0 || len16 > actlen) break; zyd_rx_data(xfer, offset, len16); /* next frame is aligned on a 32-bit boundary */ len16 = (len16 + 3) & ~3; offset += len16; if (len16 > actlen) break; actlen -= len16; } } else { DPRINTF(sc, ZYD_DEBUG_RECV, "%s: received single-frame transfer\n", __func__); zyd_rx_data(xfer, 0, actlen); } /* FALLTHROUGH */ case USB_ST_SETUP: tr_setup: usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); usbd_transfer_submit(xfer); /* * At the end of a USB callback it is always safe to unlock * the private mutex of a device! That is why we do the * "ieee80211_input" here, and not some lines up! */ ZYD_UNLOCK(sc); for (i = 0; i < sc->sc_rx_count; i++) { rssi = sc->sc_rx_data[i].rssi; m = sc->sc_rx_data[i].m; sc->sc_rx_data[i].m = NULL; nf = -95; /* XXX */ ni = ieee80211_find_rxnode(ic, mtod(m, struct ieee80211_frame_min *)); if (ni != NULL) { (void)ieee80211_input(ni, m, rssi, nf); ieee80211_free_node(ni); } else (void)ieee80211_input_all(ic, m, rssi, nf); } ZYD_LOCK(sc); zyd_start(sc); break; default: /* Error */ DPRINTF(sc, ZYD_DEBUG_ANY, "frame error: %s\n", usbd_errstr(error)); if (error != USB_ERR_CANCELLED) { /* try to clear stall first */ usbd_xfer_set_stall(xfer); goto tr_setup; } break; } } static uint8_t zyd_plcp_signal(struct zyd_softc *sc, int rate) { switch (rate) { /* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */ case 12: return (0xb); case 18: return (0xf); case 24: return (0xa); case 36: return (0xe); case 48: return (0x9); case 72: return (0xd); case 96: return (0x8); case 108: return (0xc); /* CCK rates (NB: not IEEE std, device-specific) */ case 2: return (0x0); case 4: return (0x1); case 11: return (0x2); case 22: return (0x3); } device_printf(sc->sc_dev, "unsupported rate %d\n", rate); return (0x0); } static void zyd_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error) { struct zyd_softc *sc = usbd_xfer_softc(xfer); struct ieee80211vap *vap; struct zyd_tx_data *data; struct mbuf *m; struct usb_page_cache *pc; int actlen; usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); switch (USB_GET_STATE(xfer)) { case USB_ST_TRANSFERRED: DPRINTF(sc, ZYD_DEBUG_ANY, "transfer complete, %u bytes\n", actlen); /* free resources */ data = usbd_xfer_get_priv(xfer); zyd_tx_free(data, 0); usbd_xfer_set_priv(xfer, NULL); /* FALLTHROUGH */ case USB_ST_SETUP: tr_setup: data = STAILQ_FIRST(&sc->tx_q); if (data) { STAILQ_REMOVE_HEAD(&sc->tx_q, next); m = data->m; if (m->m_pkthdr.len > (int)ZYD_MAX_TXBUFSZ) { DPRINTF(sc, ZYD_DEBUG_ANY, "data overflow, %u bytes\n", m->m_pkthdr.len); m->m_pkthdr.len = ZYD_MAX_TXBUFSZ; } pc = usbd_xfer_get_frame(xfer, 0); usbd_copy_in(pc, 0, &data->desc, ZYD_TX_DESC_SIZE); usbd_m_copy_in(pc, ZYD_TX_DESC_SIZE, m, 0, m->m_pkthdr.len); vap = data->ni->ni_vap; if (ieee80211_radiotap_active_vap(vap)) { struct zyd_tx_radiotap_header *tap = &sc->sc_txtap; tap->wt_flags = 0; tap->wt_rate = data->rate; ieee80211_radiotap_tx(vap, m); } usbd_xfer_set_frame_len(xfer, 0, ZYD_TX_DESC_SIZE + m->m_pkthdr.len); usbd_xfer_set_priv(xfer, data); usbd_transfer_submit(xfer); } zyd_start(sc); break; default: /* Error */ DPRINTF(sc, ZYD_DEBUG_ANY, "transfer error, %s\n", usbd_errstr(error)); counter_u64_add(sc->sc_ic.ic_oerrors, 1); data = usbd_xfer_get_priv(xfer); usbd_xfer_set_priv(xfer, NULL); if (data != NULL) zyd_tx_free(data, error); if (error != USB_ERR_CANCELLED) { if (error == USB_ERR_TIMEOUT) device_printf(sc->sc_dev, "device timeout\n"); /* * Try to clear stall first, also if other * errors occur, hence clearing stall * introduces a 50 ms delay: */ usbd_xfer_set_stall(xfer); goto tr_setup; } break; } } static int zyd_tx_start(struct zyd_softc *sc, struct mbuf *m0, struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct zyd_tx_desc *desc; struct zyd_tx_data *data; struct ieee80211_frame *wh; const struct ieee80211_txparam *tp; struct ieee80211_key *k; int rate, totlen; static const uint8_t ratediv[] = ZYD_TX_RATEDIV; uint8_t phy; uint16_t pktlen; uint32_t bits; wh = mtod(m0, struct ieee80211_frame *); data = STAILQ_FIRST(&sc->tx_free); STAILQ_REMOVE_HEAD(&sc->tx_free, next); sc->tx_nfree--; if ((wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_MGT || (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL) { tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; rate = tp->mgmtrate; } else { tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)]; /* for data frames */ if (IEEE80211_IS_MULTICAST(wh->i_addr1)) rate = tp->mcastrate; else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) rate = tp->ucastrate; else { (void) ieee80211_ratectl_rate(ni, NULL, 0); rate = ni->ni_txrate; } } if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { k = ieee80211_crypto_encap(ni, m0); if (k == NULL) { return (ENOBUFS); } /* packet header may have moved, reset our local pointer */ wh = mtod(m0, struct ieee80211_frame *); } data->ni = ni; data->m = m0; data->rate = rate; /* fill Tx descriptor */ desc = &data->desc; phy = zyd_plcp_signal(sc, rate); desc->phy = phy; if (ZYD_RATE_IS_OFDM(rate)) { desc->phy |= ZYD_TX_PHY_OFDM; if (IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan)) desc->phy |= ZYD_TX_PHY_5GHZ; } else if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) desc->phy |= ZYD_TX_PHY_SHPREAMBLE; totlen = m0->m_pkthdr.len + IEEE80211_CRC_LEN; desc->len = htole16(totlen); desc->flags = ZYD_TX_FLAG_BACKOFF; if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { /* multicast frames are not sent at OFDM rates in 802.11b/g */ if (totlen > vap->iv_rtsthreshold) { desc->flags |= ZYD_TX_FLAG_RTS; } else if (ZYD_RATE_IS_OFDM(rate) && (ic->ic_flags & IEEE80211_F_USEPROT)) { if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) desc->flags |= ZYD_TX_FLAG_CTS_TO_SELF; else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) desc->flags |= ZYD_TX_FLAG_RTS; } } else desc->flags |= ZYD_TX_FLAG_MULTICAST; if ((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == (IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_PS_POLL)) desc->flags |= ZYD_TX_FLAG_TYPE(ZYD_TX_TYPE_PS_POLL); /* actual transmit length (XXX why +10?) */ pktlen = ZYD_TX_DESC_SIZE + 10; if (sc->sc_macrev == ZYD_ZD1211) pktlen += totlen; desc->pktlen = htole16(pktlen); bits = (rate == 11) ? (totlen * 16) + 10 : ((rate == 22) ? (totlen * 8) + 10 : (totlen * 8)); desc->plcp_length = htole16(bits / ratediv[phy]); desc->plcp_service = 0; if (rate == 22 && (bits % 11) > 0 && (bits % 11) <= 3) desc->plcp_service |= ZYD_PLCP_LENGEXT; desc->nextlen = 0; if (ieee80211_radiotap_active_vap(vap)) { struct zyd_tx_radiotap_header *tap = &sc->sc_txtap; tap->wt_flags = 0; tap->wt_rate = rate; ieee80211_radiotap_tx(vap, m0); } DPRINTF(sc, ZYD_DEBUG_XMIT, "%s: sending data frame len=%zu rate=%u\n", device_get_nameunit(sc->sc_dev), (size_t)m0->m_pkthdr.len, rate); STAILQ_INSERT_TAIL(&sc->tx_q, data, next); usbd_transfer_start(sc->sc_xfer[ZYD_BULK_WR]); return (0); } static int zyd_transmit(struct ieee80211com *ic, struct mbuf *m) { struct zyd_softc *sc = ic->ic_softc; int error; ZYD_LOCK(sc); if ((sc->sc_flags & ZYD_FLAG_RUNNING) == 0) { ZYD_UNLOCK(sc); return (ENXIO); } error = mbufq_enqueue(&sc->sc_snd, m); if (error) { ZYD_UNLOCK(sc); return (error); } zyd_start(sc); ZYD_UNLOCK(sc); return (0); } static void zyd_start(struct zyd_softc *sc) { struct ieee80211_node *ni; struct mbuf *m; ZYD_LOCK_ASSERT(sc, MA_OWNED); while (sc->tx_nfree > 0 && (m = mbufq_dequeue(&sc->sc_snd)) != NULL) { ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; if (zyd_tx_start(sc, m, ni) != 0) { - ieee80211_free_node(ni); m_freem(m); if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1); + ieee80211_free_node(ni); break; } } } static int zyd_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, const struct ieee80211_bpf_params *params) { struct ieee80211com *ic = ni->ni_ic; struct zyd_softc *sc = ic->ic_softc; ZYD_LOCK(sc); /* prevent management frames from being sent if we're not ready */ if (!(sc->sc_flags & ZYD_FLAG_RUNNING)) { ZYD_UNLOCK(sc); m_freem(m); return (ENETDOWN); } if (sc->tx_nfree == 0) { ZYD_UNLOCK(sc); m_freem(m); return (ENOBUFS); /* XXX */ } /* * Legacy path; interpret frame contents to decide * precisely how to send the frame. * XXX raw path */ if (zyd_tx_start(sc, m, ni) != 0) { ZYD_UNLOCK(sc); m_freem(m); return (EIO); } ZYD_UNLOCK(sc); return (0); } static void zyd_parent(struct ieee80211com *ic) { struct zyd_softc *sc = ic->ic_softc; int startall = 0; ZYD_LOCK(sc); if (sc->sc_flags & ZYD_FLAG_DETACHED) { ZYD_UNLOCK(sc); return; } if (ic->ic_nrunning > 0) { if ((sc->sc_flags & ZYD_FLAG_RUNNING) == 0) { zyd_init_locked(sc); startall = 1; } else zyd_set_multi(sc); } else if (sc->sc_flags & ZYD_FLAG_RUNNING) zyd_stop(sc); ZYD_UNLOCK(sc); if (startall) ieee80211_start_all(ic); } static void zyd_init_locked(struct zyd_softc *sc) { struct ieee80211com *ic = &sc->sc_ic; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); struct usb_config_descriptor *cd; int error; uint32_t val; ZYD_LOCK_ASSERT(sc, MA_OWNED); if (!(sc->sc_flags & ZYD_FLAG_INITONCE)) { error = zyd_loadfirmware(sc); if (error != 0) { device_printf(sc->sc_dev, "could not load firmware (error=%d)\n", error); goto fail; } /* reset device */ cd = usbd_get_config_descriptor(sc->sc_udev); error = usbd_req_set_config(sc->sc_udev, &sc->sc_mtx, cd->bConfigurationValue); if (error) device_printf(sc->sc_dev, "reset failed, continuing\n"); error = zyd_hw_init(sc); if (error) { device_printf(sc->sc_dev, "hardware initialization failed\n"); goto fail; } device_printf(sc->sc_dev, "HMAC ZD1211%s, FW %02x.%02x, RF %s S%x, PA%x LED %x " "BE%x NP%x Gain%x F%x\n", (sc->sc_macrev == ZYD_ZD1211) ? "": "B", sc->sc_fwrev >> 8, sc->sc_fwrev & 0xff, zyd_rf_name(sc->sc_rfrev), sc->sc_al2230s, sc->sc_parev, sc->sc_ledtype, sc->sc_bandedge6, sc->sc_newphy, sc->sc_cckgain, sc->sc_fix_cr157); /* read regulatory domain (currently unused) */ zyd_read32_m(sc, ZYD_EEPROM_SUBID, &val); sc->sc_regdomain = val >> 16; DPRINTF(sc, ZYD_DEBUG_INIT, "regulatory domain %x\n", sc->sc_regdomain); /* we'll do software WEP decryption for now */ DPRINTF(sc, ZYD_DEBUG_INIT, "%s: setting encryption type\n", __func__); zyd_write32_m(sc, ZYD_MAC_ENCRYPTION_TYPE, ZYD_ENC_SNIFFER); sc->sc_flags |= ZYD_FLAG_INITONCE; } if (sc->sc_flags & ZYD_FLAG_RUNNING) zyd_stop(sc); DPRINTF(sc, ZYD_DEBUG_INIT, "setting MAC address to %6D\n", vap ? vap->iv_myaddr : ic->ic_macaddr, ":"); error = zyd_set_macaddr(sc, vap ? vap->iv_myaddr : ic->ic_macaddr); if (error != 0) return; /* set basic rates */ if (ic->ic_curmode == IEEE80211_MODE_11B) zyd_write32_m(sc, ZYD_MAC_BAS_RATE, 0x0003); else if (ic->ic_curmode == IEEE80211_MODE_11A) zyd_write32_m(sc, ZYD_MAC_BAS_RATE, 0x1500); else /* assumes 802.11b/g */ zyd_write32_m(sc, ZYD_MAC_BAS_RATE, 0xff0f); /* promiscuous mode */ zyd_write32_m(sc, ZYD_MAC_SNIFFER, 0); /* multicast setup */ zyd_set_multi(sc); /* set RX filter */ error = zyd_set_rxfilter(sc); if (error != 0) goto fail; /* switch radio transmitter ON */ error = zyd_switch_radio(sc, 1); if (error != 0) goto fail; /* set default BSS channel */ zyd_set_chan(sc, ic->ic_curchan); /* * Allocate Tx and Rx xfer queues. */ zyd_setup_tx_list(sc); /* enable interrupts */ zyd_write32_m(sc, ZYD_CR_INTERRUPT, ZYD_HWINT_MASK); sc->sc_flags |= ZYD_FLAG_RUNNING; usbd_xfer_set_stall(sc->sc_xfer[ZYD_BULK_WR]); usbd_transfer_start(sc->sc_xfer[ZYD_BULK_RD]); usbd_transfer_start(sc->sc_xfer[ZYD_INTR_RD]); return; fail: zyd_stop(sc); return; } static void zyd_stop(struct zyd_softc *sc) { int error; ZYD_LOCK_ASSERT(sc, MA_OWNED); sc->sc_flags &= ~ZYD_FLAG_RUNNING; zyd_drain_mbufq(sc); /* * Drain all the transfers, if not already drained: */ ZYD_UNLOCK(sc); usbd_transfer_drain(sc->sc_xfer[ZYD_BULK_WR]); usbd_transfer_drain(sc->sc_xfer[ZYD_BULK_RD]); ZYD_LOCK(sc); zyd_unsetup_tx_list(sc); /* Stop now if the device was never set up */ if (!(sc->sc_flags & ZYD_FLAG_INITONCE)) return; /* switch radio transmitter OFF */ error = zyd_switch_radio(sc, 0); if (error != 0) goto fail; /* disable Rx */ zyd_write32_m(sc, ZYD_MAC_RXFILTER, 0); /* disable interrupts */ zyd_write32_m(sc, ZYD_CR_INTERRUPT, 0); fail: return; } static int zyd_loadfirmware(struct zyd_softc *sc) { struct usb_device_request req; size_t size; u_char *fw; uint8_t stat; uint16_t addr; if (sc->sc_flags & ZYD_FLAG_FWLOADED) return (0); if (sc->sc_macrev == ZYD_ZD1211) { fw = (u_char *)zd1211_firmware; size = sizeof(zd1211_firmware); } else { fw = (u_char *)zd1211b_firmware; size = sizeof(zd1211b_firmware); } req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = ZYD_DOWNLOADREQ; USETW(req.wIndex, 0); addr = ZYD_FIRMWARE_START_ADDR; while (size > 0) { /* * When the transfer size is 4096 bytes, it is not * likely to be able to transfer it. * The cause is port or machine or chip? */ const int mlen = min(size, 64); DPRINTF(sc, ZYD_DEBUG_FW, "loading firmware block: len=%d, addr=0x%x\n", mlen, addr); USETW(req.wValue, addr); USETW(req.wLength, mlen); if (zyd_do_request(sc, &req, fw) != 0) return (EIO); addr += mlen / 2; fw += mlen; size -= mlen; } /* check whether the upload succeeded */ req.bmRequestType = UT_READ_VENDOR_DEVICE; req.bRequest = ZYD_DOWNLOADSTS; USETW(req.wValue, 0); USETW(req.wIndex, 0); USETW(req.wLength, sizeof(stat)); if (zyd_do_request(sc, &req, &stat) != 0) return (EIO); sc->sc_flags |= ZYD_FLAG_FWLOADED; return (stat & 0x80) ? (EIO) : (0); } static void zyd_scan_start(struct ieee80211com *ic) { struct zyd_softc *sc = ic->ic_softc; ZYD_LOCK(sc); /* want broadcast address while scanning */ zyd_set_bssid(sc, ieee80211broadcastaddr); ZYD_UNLOCK(sc); } static void zyd_scan_end(struct ieee80211com *ic) { struct zyd_softc *sc = ic->ic_softc; ZYD_LOCK(sc); /* restore previous bssid */ zyd_set_bssid(sc, sc->sc_bssid); ZYD_UNLOCK(sc); } static void zyd_getradiocaps(struct ieee80211com *ic, int maxchans, int *nchans, struct ieee80211_channel chans[]) { uint8_t bands[IEEE80211_MODE_BYTES]; memset(bands, 0, sizeof(bands)); setbit(bands, IEEE80211_MODE_11B); setbit(bands, IEEE80211_MODE_11G); ieee80211_add_channel_list_2ghz(chans, maxchans, nchans, zyd_chan_2ghz, nitems(zyd_chan_2ghz), bands, 0); } static void zyd_set_channel(struct ieee80211com *ic) { struct zyd_softc *sc = ic->ic_softc; ZYD_LOCK(sc); zyd_set_chan(sc, ic->ic_curchan); ZYD_UNLOCK(sc); } static device_method_t zyd_methods[] = { /* Device interface */ DEVMETHOD(device_probe, zyd_match), DEVMETHOD(device_attach, zyd_attach), DEVMETHOD(device_detach, zyd_detach), DEVMETHOD_END }; static driver_t zyd_driver = { .name = "zyd", .methods = zyd_methods, .size = sizeof(struct zyd_softc) }; static devclass_t zyd_devclass; DRIVER_MODULE(zyd, uhub, zyd_driver, zyd_devclass, NULL, 0); MODULE_DEPEND(zyd, usb, 1, 1, 1); MODULE_DEPEND(zyd, wlan, 1, 1, 1); MODULE_VERSION(zyd, 1); USB_PNP_HOST_INFO(zyd_devs); Index: stable/11 =================================================================== --- stable/11 (revision 314221) +++ stable/11 (revision 314222) Property changes on: stable/11 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r313906