Index: head/sys/i386/isa/npx.c =================================================================== --- head/sys/i386/isa/npx.c (revision 312911) +++ head/sys/i386/isa/npx.c (revision 312912) @@ -1,1511 +1,1503 @@ /*- * Copyright (c) 1990 William Jolitz. * Copyright (c) 1991 The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)npx.c 7.2 (Berkeley) 5/12/91 */ #include __FBSDID("$FreeBSD$"); #include "opt_cpu.h" #include "opt_isa.h" #include "opt_npx.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef NPX_DEBUG #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DEV_ISA #include #endif #if !defined(CPU_DISABLE_SSE) && defined(I686_CPU) #define CPU_ENABLE_SSE #endif /* * 387 and 287 Numeric Coprocessor Extension (NPX) Driver. */ #if defined(__GNUCLIKE_ASM) && !defined(lint) #define fldcw(cw) __asm __volatile("fldcw %0" : : "m" (cw)) #define fnclex() __asm __volatile("fnclex") #define fninit() __asm __volatile("fninit") #define fnsave(addr) __asm __volatile("fnsave %0" : "=m" (*(addr))) #define fnstcw(addr) __asm __volatile("fnstcw %0" : "=m" (*(addr))) #define fnstsw(addr) __asm __volatile("fnstsw %0" : "=am" (*(addr))) #define fp_divide_by_0() __asm __volatile( \ "fldz; fld1; fdiv %st,%st(1); fnop") #define frstor(addr) __asm __volatile("frstor %0" : : "m" (*(addr))) #ifdef CPU_ENABLE_SSE #define fxrstor(addr) __asm __volatile("fxrstor %0" : : "m" (*(addr))) #define fxsave(addr) __asm __volatile("fxsave %0" : "=m" (*(addr))) #define ldmxcsr(csr) __asm __volatile("ldmxcsr %0" : : "m" (csr)) #define stmxcsr(addr) __asm __volatile("stmxcsr %0" : : "m" (*(addr))) static __inline void xrstor(char *addr, uint64_t mask) { uint32_t low, hi; low = mask; hi = mask >> 32; __asm __volatile("xrstor %0" : : "m" (*addr), "a" (low), "d" (hi)); } static __inline void xsave(char *addr, uint64_t mask) { uint32_t low, hi; low = mask; hi = mask >> 32; __asm __volatile("xsave %0" : "=m" (*addr) : "a" (low), "d" (hi) : "memory"); } static __inline void xsaveopt(char *addr, uint64_t mask) { uint32_t low, hi; low = mask; hi = mask >> 32; __asm __volatile("xsaveopt %0" : "=m" (*addr) : "a" (low), "d" (hi) : "memory"); } #endif #else /* !(__GNUCLIKE_ASM && !lint) */ void fldcw(u_short cw); void fnclex(void); void fninit(void); void fnsave(caddr_t addr); void fnstcw(caddr_t addr); void fnstsw(caddr_t addr); void fp_divide_by_0(void); void frstor(caddr_t addr); #ifdef CPU_ENABLE_SSE void fxsave(caddr_t addr); void fxrstor(caddr_t addr); void ldmxcsr(u_int csr); void stmxcsr(u_int *csr); void xrstor(char *addr, uint64_t mask); void xsave(char *addr, uint64_t mask); void xsaveopt(char *addr, uint64_t mask); #endif #endif /* __GNUCLIKE_ASM && !lint */ #define start_emulating() load_cr0(rcr0() | CR0_TS) #define stop_emulating() clts() #ifdef CPU_ENABLE_SSE #define GET_FPU_CW(thread) \ (cpu_fxsr ? \ (thread)->td_pcb->pcb_save->sv_xmm.sv_env.en_cw : \ (thread)->td_pcb->pcb_save->sv_87.sv_env.en_cw) #define GET_FPU_SW(thread) \ (cpu_fxsr ? \ (thread)->td_pcb->pcb_save->sv_xmm.sv_env.en_sw : \ (thread)->td_pcb->pcb_save->sv_87.sv_env.en_sw) #define SET_FPU_CW(savefpu, value) do { \ if (cpu_fxsr) \ (savefpu)->sv_xmm.sv_env.en_cw = (value); \ else \ (savefpu)->sv_87.sv_env.en_cw = (value); \ } while (0) #else /* CPU_ENABLE_SSE */ #define GET_FPU_CW(thread) \ (thread->td_pcb->pcb_save->sv_87.sv_env.en_cw) #define GET_FPU_SW(thread) \ (thread->td_pcb->pcb_save->sv_87.sv_env.en_sw) #define SET_FPU_CW(savefpu, value) \ (savefpu)->sv_87.sv_env.en_cw = (value) #endif /* CPU_ENABLE_SSE */ #ifdef CPU_ENABLE_SSE CTASSERT(sizeof(union savefpu) == 512); CTASSERT(sizeof(struct xstate_hdr) == 64); CTASSERT(sizeof(struct savefpu_ymm) == 832); /* * This requirement is to make it easier for asm code to calculate * offset of the fpu save area from the pcb address. FPU save area * must be 64-byte aligned. */ CTASSERT(sizeof(struct pcb) % XSAVE_AREA_ALIGN == 0); /* * Ensure the copy of XCR0 saved in a core is contained in the padding * area. */ CTASSERT(X86_XSTATE_XCR0_OFFSET >= offsetof(struct savexmm, sv_pad) && X86_XSTATE_XCR0_OFFSET + sizeof(uint64_t) <= sizeof(struct savexmm)); static void fpu_clean_state(void); #endif static void fpusave(union savefpu *); static void fpurstor(union savefpu *); int hw_float; SYSCTL_INT(_hw, HW_FLOATINGPT, floatingpoint, CTLFLAG_RD, &hw_float, 0, "Floating point instructions executed in hardware"); #ifdef CPU_ENABLE_SSE int use_xsave; uint64_t xsave_mask; #endif static uma_zone_t fpu_save_area_zone; static union savefpu *npx_initialstate; #ifdef CPU_ENABLE_SSE struct xsave_area_elm_descr { u_int offset; u_int size; } *xsave_area_desc; static int use_xsaveopt; #endif static volatile u_int npx_traps_while_probing; alias_for_inthand_t probetrap; __asm(" \n\ .text \n\ .p2align 2,0x90 \n\ .type " __XSTRING(CNAME(probetrap)) ",@function \n\ " __XSTRING(CNAME(probetrap)) ": \n\ ss \n\ incl " __XSTRING(CNAME(npx_traps_while_probing)) " \n\ fnclex \n\ iret \n\ "); /* * Determine if an FPU is present and how to use it. */ static int npx_probe(void) { struct gate_descriptor save_idt_npxtrap; u_short control, status; /* * Modern CPUs all have an FPU that uses the INT16 interface * and provide a simple way to verify that, so handle the * common case right away. */ if (cpu_feature & CPUID_FPU) { hw_float = 1; return (1); } save_idt_npxtrap = idt[IDT_MF]; setidt(IDT_MF, probetrap, SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); /* * Don't trap while we're probing. */ stop_emulating(); /* * Finish resetting the coprocessor, if any. If there is an error * pending, then we may get a bogus IRQ13, but npx_intr() will handle * it OK. Bogus halts have never been observed, but we enabled * IRQ13 and cleared the BUSY# latch early to handle them anyway. */ fninit(); /* * Don't use fwait here because it might hang. * Don't use fnop here because it usually hangs if there is no FPU. */ DELAY(1000); /* wait for any IRQ13 */ #ifdef DIAGNOSTIC if (npx_traps_while_probing != 0) printf("fninit caused %u bogus npx trap(s)\n", npx_traps_while_probing); #endif /* * Check for a status of mostly zero. */ status = 0x5a5a; fnstsw(&status); if ((status & 0xb8ff) == 0) { /* * Good, now check for a proper control word. */ control = 0x5a5a; fnstcw(&control); if ((control & 0x1f3f) == 0x033f) { /* * We have an npx, now divide by 0 to see if exception * 16 works. */ control &= ~(1 << 2); /* enable divide by 0 trap */ fldcw(control); -#ifdef FPU_ERROR_BROKEN - /* - * FPU error signal doesn't work on some CPU - * accelerator board. - */ - hw_float = 1; - return (1); -#endif npx_traps_while_probing = 0; fp_divide_by_0(); if (npx_traps_while_probing != 0) { /* * Good, exception 16 works. */ hw_float = 1; goto cleanup; } printf( "FPU does not use exception 16 for error reporting\n"); goto cleanup; } } /* * Probe failed. Floating point simply won't work. * Notify user and disable FPU/MMX/SSE instruction execution. */ printf("WARNING: no FPU!\n"); __asm __volatile("smsw %%ax; orb %0,%%al; lmsw %%ax" : : "n" (CR0_EM | CR0_MP) : "ax"); cleanup: idt[IDT_MF] = save_idt_npxtrap; return (hw_float); } #ifdef CPU_ENABLE_SSE /* * Enable XSAVE if supported and allowed by user. * Calculate the xsave_mask. */ static void npxinit_bsp1(void) { u_int cp[4]; uint64_t xsave_mask_user; if (cpu_fxsr && (cpu_feature2 & CPUID2_XSAVE) != 0) { use_xsave = 1; TUNABLE_INT_FETCH("hw.use_xsave", &use_xsave); } if (!use_xsave) return; cpuid_count(0xd, 0x0, cp); xsave_mask = XFEATURE_ENABLED_X87 | XFEATURE_ENABLED_SSE; if ((cp[0] & xsave_mask) != xsave_mask) panic("CPU0 does not support X87 or SSE: %x", cp[0]); xsave_mask = ((uint64_t)cp[3] << 32) | cp[0]; xsave_mask_user = xsave_mask; TUNABLE_QUAD_FETCH("hw.xsave_mask", &xsave_mask_user); xsave_mask_user |= XFEATURE_ENABLED_X87 | XFEATURE_ENABLED_SSE; xsave_mask &= xsave_mask_user; if ((xsave_mask & XFEATURE_AVX512) != XFEATURE_AVX512) xsave_mask &= ~XFEATURE_AVX512; if ((xsave_mask & XFEATURE_MPX) != XFEATURE_MPX) xsave_mask &= ~XFEATURE_MPX; cpuid_count(0xd, 0x1, cp); if ((cp[0] & CPUID_EXTSTATE_XSAVEOPT) != 0) use_xsaveopt = 1; } #endif /* * Calculate the fpu save area size. */ static void npxinit_bsp2(void) { #ifdef CPU_ENABLE_SSE u_int cp[4]; if (use_xsave) { cpuid_count(0xd, 0x0, cp); cpu_max_ext_state_size = cp[1]; /* * Reload the cpu_feature2, since we enabled OSXSAVE. */ do_cpuid(1, cp); cpu_feature2 = cp[2]; } else #endif cpu_max_ext_state_size = sizeof(union savefpu); } /* * Initialize floating point unit. */ void npxinit(bool bsp) { static union savefpu dummy; register_t saveintr; #ifdef CPU_ENABLE_SSE u_int mxcsr; #endif u_short control; if (bsp) { if (!npx_probe()) return; #ifdef CPU_ENABLE_SSE npxinit_bsp1(); #endif } #ifdef CPU_ENABLE_SSE if (use_xsave) { load_cr4(rcr4() | CR4_XSAVE); load_xcr(XCR0, xsave_mask); } #endif /* * XCR0 shall be set up before CPU can report the save area size. */ if (bsp) npxinit_bsp2(); /* * fninit has the same h/w bugs as fnsave. Use the detoxified * fnsave to throw away any junk in the fpu. fpusave() initializes * the fpu. * * It is too early for critical_enter() to work on AP. */ saveintr = intr_disable(); stop_emulating(); #ifdef CPU_ENABLE_SSE if (cpu_fxsr) fninit(); else #endif fnsave(&dummy); control = __INITIAL_NPXCW__; fldcw(control); #ifdef CPU_ENABLE_SSE if (cpu_fxsr) { mxcsr = __INITIAL_MXCSR__; ldmxcsr(mxcsr); } #endif start_emulating(); intr_restore(saveintr); } /* * On the boot CPU we generate a clean state that is used to * initialize the floating point unit when it is first used by a * process. */ static void npxinitstate(void *arg __unused) { register_t saveintr; #ifdef CPU_ENABLE_SSE int cp[4], i, max_ext_n; #endif if (!hw_float) return; npx_initialstate = malloc(cpu_max_ext_state_size, M_DEVBUF, M_WAITOK | M_ZERO); saveintr = intr_disable(); stop_emulating(); fpusave(npx_initialstate); #ifdef CPU_ENABLE_SSE if (cpu_fxsr) { if (npx_initialstate->sv_xmm.sv_env.en_mxcsr_mask) cpu_mxcsr_mask = npx_initialstate->sv_xmm.sv_env.en_mxcsr_mask; else cpu_mxcsr_mask = 0xFFBF; /* * The fninit instruction does not modify XMM * registers or x87 registers (MM/ST). The fpusave * call dumped the garbage contained in the registers * after reset to the initial state saved. Clear XMM * and x87 registers file image to make the startup * program state and signal handler XMM/x87 register * content predictable. */ bzero(npx_initialstate->sv_xmm.sv_fp, sizeof(npx_initialstate->sv_xmm.sv_fp)); bzero(npx_initialstate->sv_xmm.sv_xmm, sizeof(npx_initialstate->sv_xmm.sv_xmm)); } else #endif bzero(npx_initialstate->sv_87.sv_ac, sizeof(npx_initialstate->sv_87.sv_ac)); #ifdef CPU_ENABLE_SSE /* * Create a table describing the layout of the CPU Extended * Save Area. */ if (use_xsave) { if (xsave_mask >> 32 != 0) max_ext_n = fls(xsave_mask >> 32) + 32; else max_ext_n = fls(xsave_mask); xsave_area_desc = malloc(max_ext_n * sizeof(struct xsave_area_elm_descr), M_DEVBUF, M_WAITOK | M_ZERO); /* x87 state */ xsave_area_desc[0].offset = 0; xsave_area_desc[0].size = 160; /* XMM */ xsave_area_desc[1].offset = 160; xsave_area_desc[1].size = 288 - 160; for (i = 2; i < max_ext_n; i++) { cpuid_count(0xd, i, cp); xsave_area_desc[i].offset = cp[1]; xsave_area_desc[i].size = cp[0]; } } #endif fpu_save_area_zone = uma_zcreate("FPU_save_area", cpu_max_ext_state_size, NULL, NULL, NULL, NULL, XSAVE_AREA_ALIGN - 1, 0); start_emulating(); intr_restore(saveintr); } SYSINIT(npxinitstate, SI_SUB_DRIVERS, SI_ORDER_ANY, npxinitstate, NULL); /* * Free coprocessor (if we have it). */ void npxexit(td) struct thread *td; { critical_enter(); if (curthread == PCPU_GET(fpcurthread)) { stop_emulating(); fpusave(curpcb->pcb_save); start_emulating(); PCPU_SET(fpcurthread, NULL); } critical_exit(); #ifdef NPX_DEBUG if (hw_float) { u_int masked_exceptions; masked_exceptions = GET_FPU_CW(td) & GET_FPU_SW(td) & 0x7f; /* * Log exceptions that would have trapped with the old * control word (overflow, divide by 0, and invalid operand). */ if (masked_exceptions & 0x0d) log(LOG_ERR, "pid %d (%s) exited with masked floating point exceptions 0x%02x\n", td->td_proc->p_pid, td->td_proc->p_comm, masked_exceptions); } #endif } int npxformat() { if (!hw_float) return (_MC_FPFMT_NODEV); #ifdef CPU_ENABLE_SSE if (cpu_fxsr) return (_MC_FPFMT_XMM); #endif return (_MC_FPFMT_387); } /* * The following mechanism is used to ensure that the FPE_... value * that is passed as a trapcode to the signal handler of the user * process does not have more than one bit set. * * Multiple bits may be set if the user process modifies the control * word while a status word bit is already set. While this is a sign * of bad coding, we have no choise than to narrow them down to one * bit, since we must not send a trapcode that is not exactly one of * the FPE_ macros. * * The mechanism has a static table with 127 entries. Each combination * of the 7 FPU status word exception bits directly translates to a * position in this table, where a single FPE_... value is stored. * This FPE_... value stored there is considered the "most important" * of the exception bits and will be sent as the signal code. The * precedence of the bits is based upon Intel Document "Numerical * Applications", Chapter "Special Computational Situations". * * The macro to choose one of these values does these steps: 1) Throw * away status word bits that cannot be masked. 2) Throw away the bits * currently masked in the control word, assuming the user isn't * interested in them anymore. 3) Reinsert status word bit 7 (stack * fault) if it is set, which cannot be masked but must be presered. * 4) Use the remaining bits to point into the trapcode table. * * The 6 maskable bits in order of their preference, as stated in the * above referenced Intel manual: * 1 Invalid operation (FP_X_INV) * 1a Stack underflow * 1b Stack overflow * 1c Operand of unsupported format * 1d SNaN operand. * 2 QNaN operand (not an exception, irrelavant here) * 3 Any other invalid-operation not mentioned above or zero divide * (FP_X_INV, FP_X_DZ) * 4 Denormal operand (FP_X_DNML) * 5 Numeric over/underflow (FP_X_OFL, FP_X_UFL) * 6 Inexact result (FP_X_IMP) */ static char fpetable[128] = { 0, FPE_FLTINV, /* 1 - INV */ FPE_FLTUND, /* 2 - DNML */ FPE_FLTINV, /* 3 - INV | DNML */ FPE_FLTDIV, /* 4 - DZ */ FPE_FLTINV, /* 5 - INV | DZ */ FPE_FLTDIV, /* 6 - DNML | DZ */ FPE_FLTINV, /* 7 - INV | DNML | DZ */ FPE_FLTOVF, /* 8 - OFL */ FPE_FLTINV, /* 9 - INV | OFL */ FPE_FLTUND, /* A - DNML | OFL */ FPE_FLTINV, /* B - INV | DNML | OFL */ FPE_FLTDIV, /* C - DZ | OFL */ FPE_FLTINV, /* D - INV | DZ | OFL */ FPE_FLTDIV, /* E - DNML | DZ | OFL */ FPE_FLTINV, /* F - INV | DNML | DZ | OFL */ FPE_FLTUND, /* 10 - UFL */ FPE_FLTINV, /* 11 - INV | UFL */ FPE_FLTUND, /* 12 - DNML | UFL */ FPE_FLTINV, /* 13 - INV | DNML | UFL */ FPE_FLTDIV, /* 14 - DZ | UFL */ FPE_FLTINV, /* 15 - INV | DZ | UFL */ FPE_FLTDIV, /* 16 - DNML | DZ | UFL */ FPE_FLTINV, /* 17 - INV | DNML | DZ | UFL */ FPE_FLTOVF, /* 18 - OFL | UFL */ FPE_FLTINV, /* 19 - INV | OFL | UFL */ FPE_FLTUND, /* 1A - DNML | OFL | UFL */ FPE_FLTINV, /* 1B - INV | DNML | OFL | UFL */ FPE_FLTDIV, /* 1C - DZ | OFL | UFL */ FPE_FLTINV, /* 1D - INV | DZ | OFL | UFL */ FPE_FLTDIV, /* 1E - DNML | DZ | OFL | UFL */ FPE_FLTINV, /* 1F - INV | DNML | DZ | OFL | UFL */ FPE_FLTRES, /* 20 - IMP */ FPE_FLTINV, /* 21 - INV | IMP */ FPE_FLTUND, /* 22 - DNML | IMP */ FPE_FLTINV, /* 23 - INV | DNML | IMP */ FPE_FLTDIV, /* 24 - DZ | IMP */ FPE_FLTINV, /* 25 - INV | DZ | IMP */ FPE_FLTDIV, /* 26 - DNML | DZ | IMP */ FPE_FLTINV, /* 27 - INV | DNML | DZ | IMP */ FPE_FLTOVF, /* 28 - OFL | IMP */ FPE_FLTINV, /* 29 - INV | OFL | IMP */ FPE_FLTUND, /* 2A - DNML | OFL | IMP */ FPE_FLTINV, /* 2B - INV | DNML | OFL | IMP */ FPE_FLTDIV, /* 2C - DZ | OFL | IMP */ FPE_FLTINV, /* 2D - INV | DZ | OFL | IMP */ FPE_FLTDIV, /* 2E - DNML | DZ | OFL | IMP */ FPE_FLTINV, /* 2F - INV | DNML | DZ | OFL | IMP */ FPE_FLTUND, /* 30 - UFL | IMP */ FPE_FLTINV, /* 31 - INV | UFL | IMP */ FPE_FLTUND, /* 32 - DNML | UFL | IMP */ FPE_FLTINV, /* 33 - INV | DNML | UFL | IMP */ FPE_FLTDIV, /* 34 - DZ | UFL | IMP */ FPE_FLTINV, /* 35 - INV | DZ | UFL | IMP */ FPE_FLTDIV, /* 36 - DNML | DZ | UFL | IMP */ FPE_FLTINV, /* 37 - INV | DNML | DZ | UFL | IMP */ FPE_FLTOVF, /* 38 - OFL | UFL | IMP */ FPE_FLTINV, /* 39 - INV | OFL | UFL | IMP */ FPE_FLTUND, /* 3A - DNML | OFL | UFL | IMP */ FPE_FLTINV, /* 3B - INV | DNML | OFL | UFL | IMP */ FPE_FLTDIV, /* 3C - DZ | OFL | UFL | IMP */ FPE_FLTINV, /* 3D - INV | DZ | OFL | UFL | IMP */ FPE_FLTDIV, /* 3E - DNML | DZ | OFL | UFL | IMP */ FPE_FLTINV, /* 3F - INV | DNML | DZ | OFL | UFL | IMP */ FPE_FLTSUB, /* 40 - STK */ FPE_FLTSUB, /* 41 - INV | STK */ FPE_FLTUND, /* 42 - DNML | STK */ FPE_FLTSUB, /* 43 - INV | DNML | STK */ FPE_FLTDIV, /* 44 - DZ | STK */ FPE_FLTSUB, /* 45 - INV | DZ | STK */ FPE_FLTDIV, /* 46 - DNML | DZ | STK */ FPE_FLTSUB, /* 47 - INV | DNML | DZ | STK */ FPE_FLTOVF, /* 48 - OFL | STK */ FPE_FLTSUB, /* 49 - INV | OFL | STK */ FPE_FLTUND, /* 4A - DNML | OFL | STK */ FPE_FLTSUB, /* 4B - INV | DNML | OFL | STK */ FPE_FLTDIV, /* 4C - DZ | OFL | STK */ FPE_FLTSUB, /* 4D - INV | DZ | OFL | STK */ FPE_FLTDIV, /* 4E - DNML | DZ | OFL | STK */ FPE_FLTSUB, /* 4F - INV | DNML | DZ | OFL | STK */ FPE_FLTUND, /* 50 - UFL | STK */ FPE_FLTSUB, /* 51 - INV | UFL | STK */ FPE_FLTUND, /* 52 - DNML | UFL | STK */ FPE_FLTSUB, /* 53 - INV | DNML | UFL | STK */ FPE_FLTDIV, /* 54 - DZ | UFL | STK */ FPE_FLTSUB, /* 55 - INV | DZ | UFL | STK */ FPE_FLTDIV, /* 56 - DNML | DZ | UFL | STK */ FPE_FLTSUB, /* 57 - INV | DNML | DZ | UFL | STK */ FPE_FLTOVF, /* 58 - OFL | UFL | STK */ FPE_FLTSUB, /* 59 - INV | OFL | UFL | STK */ FPE_FLTUND, /* 5A - DNML | OFL | UFL | STK */ FPE_FLTSUB, /* 5B - INV | DNML | OFL | UFL | STK */ FPE_FLTDIV, /* 5C - DZ | OFL | UFL | STK */ FPE_FLTSUB, /* 5D - INV | DZ | OFL | UFL | STK */ FPE_FLTDIV, /* 5E - DNML | DZ | OFL | UFL | STK */ FPE_FLTSUB, /* 5F - INV | DNML | DZ | OFL | UFL | STK */ FPE_FLTRES, /* 60 - IMP | STK */ FPE_FLTSUB, /* 61 - INV | IMP | STK */ FPE_FLTUND, /* 62 - DNML | IMP | STK */ FPE_FLTSUB, /* 63 - INV | DNML | IMP | STK */ FPE_FLTDIV, /* 64 - DZ | IMP | STK */ FPE_FLTSUB, /* 65 - INV | DZ | IMP | STK */ FPE_FLTDIV, /* 66 - DNML | DZ | IMP | STK */ FPE_FLTSUB, /* 67 - INV | DNML | DZ | IMP | STK */ FPE_FLTOVF, /* 68 - OFL | IMP | STK */ FPE_FLTSUB, /* 69 - INV | OFL | IMP | STK */ FPE_FLTUND, /* 6A - DNML | OFL | IMP | STK */ FPE_FLTSUB, /* 6B - INV | DNML | OFL | IMP | STK */ FPE_FLTDIV, /* 6C - DZ | OFL | IMP | STK */ FPE_FLTSUB, /* 6D - INV | DZ | OFL | IMP | STK */ FPE_FLTDIV, /* 6E - DNML | DZ | OFL | IMP | STK */ FPE_FLTSUB, /* 6F - INV | DNML | DZ | OFL | IMP | STK */ FPE_FLTUND, /* 70 - UFL | IMP | STK */ FPE_FLTSUB, /* 71 - INV | UFL | IMP | STK */ FPE_FLTUND, /* 72 - DNML | UFL | IMP | STK */ FPE_FLTSUB, /* 73 - INV | DNML | UFL | IMP | STK */ FPE_FLTDIV, /* 74 - DZ | UFL | IMP | STK */ FPE_FLTSUB, /* 75 - INV | DZ | UFL | IMP | STK */ FPE_FLTDIV, /* 76 - DNML | DZ | UFL | IMP | STK */ FPE_FLTSUB, /* 77 - INV | DNML | DZ | UFL | IMP | STK */ FPE_FLTOVF, /* 78 - OFL | UFL | IMP | STK */ FPE_FLTSUB, /* 79 - INV | OFL | UFL | IMP | STK */ FPE_FLTUND, /* 7A - DNML | OFL | UFL | IMP | STK */ FPE_FLTSUB, /* 7B - INV | DNML | OFL | UFL | IMP | STK */ FPE_FLTDIV, /* 7C - DZ | OFL | UFL | IMP | STK */ FPE_FLTSUB, /* 7D - INV | DZ | OFL | UFL | IMP | STK */ FPE_FLTDIV, /* 7E - DNML | DZ | OFL | UFL | IMP | STK */ FPE_FLTSUB, /* 7F - INV | DNML | DZ | OFL | UFL | IMP | STK */ }; /* * Read the FP status and control words, then generate si_code value * for SIGFPE. The error code chosen will be one of the * FPE_... macros. It will be sent as the second argument to old * BSD-style signal handlers and as "siginfo_t->si_code" (second * argument) to SA_SIGINFO signal handlers. * * Some time ago, we cleared the x87 exceptions with FNCLEX there. * Clearing exceptions was necessary mainly to avoid IRQ13 bugs. The * usermode code which understands the FPU hardware enough to enable * the exceptions, can also handle clearing the exception state in the * handler. The only consequence of not clearing the exception is the * rethrow of the SIGFPE on return from the signal handler and * reexecution of the corresponding instruction. * * For XMM traps, the exceptions were never cleared. */ int npxtrap_x87(void) { u_short control, status; if (!hw_float) { printf( "npxtrap_x87: fpcurthread = %p, curthread = %p, hw_float = %d\n", PCPU_GET(fpcurthread), curthread, hw_float); panic("npxtrap from nowhere"); } critical_enter(); /* * Interrupt handling (for another interrupt) may have pushed the * state to memory. Fetch the relevant parts of the state from * wherever they are. */ if (PCPU_GET(fpcurthread) != curthread) { control = GET_FPU_CW(curthread); status = GET_FPU_SW(curthread); } else { fnstcw(&control); fnstsw(&status); } critical_exit(); return (fpetable[status & ((~control & 0x3f) | 0x40)]); } #ifdef CPU_ENABLE_SSE int npxtrap_sse(void) { u_int mxcsr; if (!hw_float) { printf( "npxtrap_sse: fpcurthread = %p, curthread = %p, hw_float = %d\n", PCPU_GET(fpcurthread), curthread, hw_float); panic("npxtrap from nowhere"); } critical_enter(); if (PCPU_GET(fpcurthread) != curthread) mxcsr = curthread->td_pcb->pcb_save->sv_xmm.sv_env.en_mxcsr; else stmxcsr(&mxcsr); critical_exit(); return (fpetable[(mxcsr & (~mxcsr >> 7)) & 0x3f]); } #endif /* * Implement device not available (DNA) exception * * It would be better to switch FP context here (if curthread != fpcurthread) * and not necessarily for every context switch, but it is too hard to * access foreign pcb's. */ static int err_count = 0; int npxdna(void) { if (!hw_float) return (0); critical_enter(); if (PCPU_GET(fpcurthread) == curthread) { printf("npxdna: fpcurthread == curthread %d times\n", ++err_count); stop_emulating(); critical_exit(); return (1); } if (PCPU_GET(fpcurthread) != NULL) { printf("npxdna: fpcurthread = %p (%d), curthread = %p (%d)\n", PCPU_GET(fpcurthread), PCPU_GET(fpcurthread)->td_proc->p_pid, curthread, curthread->td_proc->p_pid); panic("npxdna"); } stop_emulating(); /* * Record new context early in case frstor causes a trap. */ PCPU_SET(fpcurthread, curthread); #ifdef CPU_ENABLE_SSE if (cpu_fxsr) fpu_clean_state(); #endif if ((curpcb->pcb_flags & PCB_NPXINITDONE) == 0) { /* * This is the first time this thread has used the FPU or * the PCB doesn't contain a clean FPU state. Explicitly * load an initial state. * * We prefer to restore the state from the actual save * area in PCB instead of directly loading from * npx_initialstate, to ignite the XSAVEOPT * tracking engine. */ bcopy(npx_initialstate, curpcb->pcb_save, cpu_max_ext_state_size); fpurstor(curpcb->pcb_save); if (curpcb->pcb_initial_npxcw != __INITIAL_NPXCW__) fldcw(curpcb->pcb_initial_npxcw); curpcb->pcb_flags |= PCB_NPXINITDONE; if (PCB_USER_FPU(curpcb)) curpcb->pcb_flags |= PCB_NPXUSERINITDONE; } else { fpurstor(curpcb->pcb_save); } critical_exit(); return (1); } /* * Wrapper for fpusave() called from context switch routines. * * npxsave() must be called with interrupts disabled, so that it clears * fpcurthread atomically with saving the state. We require callers to do the * disabling, since most callers need to disable interrupts anyway to call * npxsave() atomically with checking fpcurthread. */ void npxsave(addr) union savefpu *addr; { stop_emulating(); #ifdef CPU_ENABLE_SSE if (use_xsaveopt) xsaveopt((char *)addr, xsave_mask); else #endif fpusave(addr); start_emulating(); PCPU_SET(fpcurthread, NULL); } /* * Unconditionally save the current co-processor state across suspend and * resume. */ void npxsuspend(union savefpu *addr) { register_t cr0; if (!hw_float) return; if (PCPU_GET(fpcurthread) == NULL) { bcopy(npx_initialstate, addr, cpu_max_ext_state_size); return; } cr0 = rcr0(); stop_emulating(); fpusave(addr); load_cr0(cr0); } void npxresume(union savefpu *addr) { register_t cr0; if (!hw_float) return; cr0 = rcr0(); npxinit(false); stop_emulating(); fpurstor(addr); load_cr0(cr0); } void npxdrop() { struct thread *td; /* * Discard pending exceptions in the !cpu_fxsr case so that unmasked * ones don't cause a panic on the next frstor. */ #ifdef CPU_ENABLE_SSE if (!cpu_fxsr) #endif fnclex(); td = PCPU_GET(fpcurthread); KASSERT(td == curthread, ("fpudrop: fpcurthread != curthread")); CRITICAL_ASSERT(td); PCPU_SET(fpcurthread, NULL); td->td_pcb->pcb_flags &= ~PCB_NPXINITDONE; start_emulating(); } /* * Get the user state of the FPU into pcb->pcb_user_save without * dropping ownership (if possible). It returns the FPU ownership * status. */ int npxgetregs(struct thread *td) { struct pcb *pcb; #ifdef CPU_ENABLE_SSE uint64_t *xstate_bv, bit; char *sa; int max_ext_n, i; #endif int owned; if (!hw_float) return (_MC_FPOWNED_NONE); pcb = td->td_pcb; if ((pcb->pcb_flags & PCB_NPXINITDONE) == 0) { bcopy(npx_initialstate, get_pcb_user_save_pcb(pcb), cpu_max_ext_state_size); SET_FPU_CW(get_pcb_user_save_pcb(pcb), pcb->pcb_initial_npxcw); npxuserinited(td); return (_MC_FPOWNED_PCB); } critical_enter(); if (td == PCPU_GET(fpcurthread)) { fpusave(get_pcb_user_save_pcb(pcb)); #ifdef CPU_ENABLE_SSE if (!cpu_fxsr) #endif /* * fnsave initializes the FPU and destroys whatever * context it contains. Make sure the FPU owner * starts with a clean state next time. */ npxdrop(); owned = _MC_FPOWNED_FPU; } else { owned = _MC_FPOWNED_PCB; } critical_exit(); #ifdef CPU_ENABLE_SSE if (use_xsave) { /* * Handle partially saved state. */ sa = (char *)get_pcb_user_save_pcb(pcb); xstate_bv = (uint64_t *)(sa + sizeof(union savefpu) + offsetof(struct xstate_hdr, xstate_bv)); if (xsave_mask >> 32 != 0) max_ext_n = fls(xsave_mask >> 32) + 32; else max_ext_n = fls(xsave_mask); for (i = 0; i < max_ext_n; i++) { bit = 1ULL << i; if ((xsave_mask & bit) == 0 || (*xstate_bv & bit) != 0) continue; bcopy((char *)npx_initialstate + xsave_area_desc[i].offset, sa + xsave_area_desc[i].offset, xsave_area_desc[i].size); *xstate_bv |= bit; } } #endif return (owned); } void npxuserinited(struct thread *td) { struct pcb *pcb; pcb = td->td_pcb; if (PCB_USER_FPU(pcb)) pcb->pcb_flags |= PCB_NPXINITDONE; pcb->pcb_flags |= PCB_NPXUSERINITDONE; } #ifdef CPU_ENABLE_SSE int npxsetxstate(struct thread *td, char *xfpustate, size_t xfpustate_size) { struct xstate_hdr *hdr, *ehdr; size_t len, max_len; uint64_t bv; /* XXXKIB should we clear all extended state in xstate_bv instead ? */ if (xfpustate == NULL) return (0); if (!use_xsave) return (EOPNOTSUPP); len = xfpustate_size; if (len < sizeof(struct xstate_hdr)) return (EINVAL); max_len = cpu_max_ext_state_size - sizeof(union savefpu); if (len > max_len) return (EINVAL); ehdr = (struct xstate_hdr *)xfpustate; bv = ehdr->xstate_bv; /* * Avoid #gp. */ if (bv & ~xsave_mask) return (EINVAL); hdr = (struct xstate_hdr *)(get_pcb_user_save_td(td) + 1); hdr->xstate_bv = bv; bcopy(xfpustate + sizeof(struct xstate_hdr), (char *)(hdr + 1), len - sizeof(struct xstate_hdr)); return (0); } #endif int npxsetregs(struct thread *td, union savefpu *addr, char *xfpustate, size_t xfpustate_size) { struct pcb *pcb; #ifdef CPU_ENABLE_SSE int error; #endif if (!hw_float) return (ENXIO); pcb = td->td_pcb; critical_enter(); if (td == PCPU_GET(fpcurthread) && PCB_USER_FPU(pcb)) { #ifdef CPU_ENABLE_SSE error = npxsetxstate(td, xfpustate, xfpustate_size); if (error != 0) { critical_exit(); return (error); } if (!cpu_fxsr) #endif fnclex(); /* As in npxdrop(). */ bcopy(addr, get_pcb_user_save_td(td), sizeof(*addr)); fpurstor(get_pcb_user_save_td(td)); critical_exit(); pcb->pcb_flags |= PCB_NPXUSERINITDONE | PCB_NPXINITDONE; } else { critical_exit(); #ifdef CPU_ENABLE_SSE error = npxsetxstate(td, xfpustate, xfpustate_size); if (error != 0) return (error); #endif bcopy(addr, get_pcb_user_save_td(td), sizeof(*addr)); npxuserinited(td); } return (0); } static void fpusave(addr) union savefpu *addr; { #ifdef CPU_ENABLE_SSE if (use_xsave) xsave((char *)addr, xsave_mask); else if (cpu_fxsr) fxsave(addr); else #endif fnsave(addr); } #ifdef CPU_ENABLE_SSE static void npx_fill_fpregs_xmm1(struct savexmm *sv_xmm, struct save87 *sv_87) { struct env87 *penv_87; struct envxmm *penv_xmm; int i; penv_87 = &sv_87->sv_env; penv_xmm = &sv_xmm->sv_env; /* FPU control/status */ penv_87->en_cw = penv_xmm->en_cw; penv_87->en_sw = penv_xmm->en_sw; penv_87->en_fip = penv_xmm->en_fip; penv_87->en_fcs = penv_xmm->en_fcs; penv_87->en_opcode = penv_xmm->en_opcode; penv_87->en_foo = penv_xmm->en_foo; penv_87->en_fos = penv_xmm->en_fos; /* FPU registers and tags */ penv_87->en_tw = 0xffff; for (i = 0; i < 8; ++i) { sv_87->sv_ac[i] = sv_xmm->sv_fp[i].fp_acc; if ((penv_xmm->en_tw & (1 << i)) != 0) /* zero and special are set as valid */ penv_87->en_tw &= ~(3 << i); } } void npx_fill_fpregs_xmm(struct savexmm *sv_xmm, struct save87 *sv_87) { bzero(sv_87, sizeof(*sv_87)); npx_fill_fpregs_xmm1(sv_xmm, sv_87); } void npx_set_fpregs_xmm(struct save87 *sv_87, struct savexmm *sv_xmm) { struct env87 *penv_87; struct envxmm *penv_xmm; int i; penv_87 = &sv_87->sv_env; penv_xmm = &sv_xmm->sv_env; /* FPU control/status */ penv_xmm->en_cw = penv_87->en_cw; penv_xmm->en_sw = penv_87->en_sw; penv_xmm->en_fip = penv_87->en_fip; penv_xmm->en_fcs = penv_87->en_fcs; penv_xmm->en_opcode = penv_87->en_opcode; penv_xmm->en_foo = penv_87->en_foo; penv_xmm->en_fos = penv_87->en_fos; /* FPU registers and tags */ penv_xmm->en_tw = 0; for (i = 0; i < 8; ++i) { sv_xmm->sv_fp[i].fp_acc = sv_87->sv_ac[i]; if ((penv_87->en_tw && (3 << i)) != (3 << i)) penv_xmm->en_tw |= 1 << i; } } #endif /* CPU_ENABLE_SSE */ void npx_get_fsave(void *addr) { struct thread *td; union savefpu *sv; td = curthread; npxgetregs(td); sv = get_pcb_user_save_td(td); #ifdef CPU_ENABLE_SSE if (cpu_fxsr) npx_fill_fpregs_xmm1(&sv->sv_xmm, addr); else #endif bcopy(sv, addr, sizeof(struct env87) + sizeof(struct fpacc87[8])); } int npx_set_fsave(void *addr) { union savefpu sv; int error; bzero(&sv, sizeof(sv)); #ifdef CPU_ENABLE_SSE if (cpu_fxsr) npx_set_fpregs_xmm(addr, &sv.sv_xmm); else #endif bcopy(addr, &sv, sizeof(struct env87) + sizeof(struct fpacc87[8])); error = npxsetregs(curthread, &sv, NULL, 0); return (error); } #ifdef CPU_ENABLE_SSE /* * On AuthenticAMD processors, the fxrstor instruction does not restore * the x87's stored last instruction pointer, last data pointer, and last * opcode values, except in the rare case in which the exception summary * (ES) bit in the x87 status word is set to 1. * * In order to avoid leaking this information across processes, we clean * these values by performing a dummy load before executing fxrstor(). */ static void fpu_clean_state(void) { static float dummy_variable = 0.0; u_short status; /* * Clear the ES bit in the x87 status word if it is currently * set, in order to avoid causing a fault in the upcoming load. */ fnstsw(&status); if (status & 0x80) fnclex(); /* * Load the dummy variable into the x87 stack. This mangles * the x87 stack, but we don't care since we're about to call * fxrstor() anyway. */ __asm __volatile("ffree %%st(7); flds %0" : : "m" (dummy_variable)); } #endif /* CPU_ENABLE_SSE */ static void fpurstor(addr) union savefpu *addr; { #ifdef CPU_ENABLE_SSE if (use_xsave) xrstor((char *)addr, xsave_mask); else if (cpu_fxsr) fxrstor(addr); else #endif frstor(addr); } #ifdef DEV_ISA /* * This sucks up the legacy ISA support assignments from PNPBIOS/ACPI. */ static struct isa_pnp_id npxisa_ids[] = { { 0x040cd041, "Legacy ISA coprocessor support" }, /* PNP0C04 */ { 0 } }; static int npxisa_probe(device_t dev) { int result; if ((result = ISA_PNP_PROBE(device_get_parent(dev), dev, npxisa_ids)) <= 0) { device_quiet(dev); } return(result); } static int npxisa_attach(device_t dev) { return (0); } static device_method_t npxisa_methods[] = { /* Device interface */ DEVMETHOD(device_probe, npxisa_probe), DEVMETHOD(device_attach, npxisa_attach), DEVMETHOD(device_detach, bus_generic_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), { 0, 0 } }; static driver_t npxisa_driver = { "npxisa", npxisa_methods, 1, /* no softc */ }; static devclass_t npxisa_devclass; DRIVER_MODULE(npxisa, isa, npxisa_driver, npxisa_devclass, 0, 0); DRIVER_MODULE(npxisa, acpi, npxisa_driver, npxisa_devclass, 0, 0); #endif /* DEV_ISA */ static MALLOC_DEFINE(M_FPUKERN_CTX, "fpukern_ctx", "Kernel contexts for FPU state"); #define FPU_KERN_CTX_NPXINITDONE 0x01 #define FPU_KERN_CTX_DUMMY 0x02 #define FPU_KERN_CTX_INUSE 0x04 struct fpu_kern_ctx { union savefpu *prev; uint32_t flags; char hwstate1[]; }; struct fpu_kern_ctx * fpu_kern_alloc_ctx(u_int flags) { struct fpu_kern_ctx *res; size_t sz; sz = sizeof(struct fpu_kern_ctx) + XSAVE_AREA_ALIGN + cpu_max_ext_state_size; res = malloc(sz, M_FPUKERN_CTX, ((flags & FPU_KERN_NOWAIT) ? M_NOWAIT : M_WAITOK) | M_ZERO); return (res); } void fpu_kern_free_ctx(struct fpu_kern_ctx *ctx) { KASSERT((ctx->flags & FPU_KERN_CTX_INUSE) == 0, ("free'ing inuse ctx")); /* XXXKIB clear the memory ? */ free(ctx, M_FPUKERN_CTX); } static union savefpu * fpu_kern_ctx_savefpu(struct fpu_kern_ctx *ctx) { vm_offset_t p; p = (vm_offset_t)&ctx->hwstate1; p = roundup2(p, XSAVE_AREA_ALIGN); return ((union savefpu *)p); } int fpu_kern_enter(struct thread *td, struct fpu_kern_ctx *ctx, u_int flags) { struct pcb *pcb; KASSERT((ctx->flags & FPU_KERN_CTX_INUSE) == 0, ("using inuse ctx")); if ((flags & FPU_KERN_KTHR) != 0 && is_fpu_kern_thread(0)) { ctx->flags = FPU_KERN_CTX_DUMMY | FPU_KERN_CTX_INUSE; return (0); } pcb = td->td_pcb; KASSERT(!PCB_USER_FPU(pcb) || pcb->pcb_save == get_pcb_user_save_pcb(pcb), ("mangled pcb_save")); ctx->flags = FPU_KERN_CTX_INUSE; if ((pcb->pcb_flags & PCB_NPXINITDONE) != 0) ctx->flags |= FPU_KERN_CTX_NPXINITDONE; npxexit(td); ctx->prev = pcb->pcb_save; pcb->pcb_save = fpu_kern_ctx_savefpu(ctx); pcb->pcb_flags |= PCB_KERNNPX; pcb->pcb_flags &= ~PCB_NPXINITDONE; return (0); } int fpu_kern_leave(struct thread *td, struct fpu_kern_ctx *ctx) { struct pcb *pcb; KASSERT((ctx->flags & FPU_KERN_CTX_INUSE) != 0, ("leaving not inuse ctx")); ctx->flags &= ~FPU_KERN_CTX_INUSE; if (is_fpu_kern_thread(0) && (ctx->flags & FPU_KERN_CTX_DUMMY) != 0) return (0); pcb = td->td_pcb; critical_enter(); if (curthread == PCPU_GET(fpcurthread)) npxdrop(); critical_exit(); pcb->pcb_save = ctx->prev; if (pcb->pcb_save == get_pcb_user_save_pcb(pcb)) { if ((pcb->pcb_flags & PCB_NPXUSERINITDONE) != 0) pcb->pcb_flags |= PCB_NPXINITDONE; else pcb->pcb_flags &= ~PCB_NPXINITDONE; pcb->pcb_flags &= ~PCB_KERNNPX; } else { if ((ctx->flags & FPU_KERN_CTX_NPXINITDONE) != 0) pcb->pcb_flags |= PCB_NPXINITDONE; else pcb->pcb_flags &= ~PCB_NPXINITDONE; KASSERT(!PCB_USER_FPU(pcb), ("unpaired fpu_kern_leave")); } return (0); } int fpu_kern_thread(u_int flags) { KASSERT((curthread->td_pflags & TDP_KTHREAD) != 0, ("Only kthread may use fpu_kern_thread")); KASSERT(curpcb->pcb_save == get_pcb_user_save_pcb(curpcb), ("mangled pcb_save")); KASSERT(PCB_USER_FPU(curpcb), ("recursive call")); curpcb->pcb_flags |= PCB_KERNNPX; return (0); } int is_fpu_kern_thread(u_int flags) { if ((curthread->td_pflags & TDP_KTHREAD) == 0) return (0); return ((curpcb->pcb_flags & PCB_KERNNPX) != 0); } /* * FPU save area alloc/free/init utility routines */ union savefpu * fpu_save_area_alloc(void) { return (uma_zalloc(fpu_save_area_zone, 0)); } void fpu_save_area_free(union savefpu *fsa) { uma_zfree(fpu_save_area_zone, fsa); } void fpu_save_area_reset(union savefpu *fsa) { bcopy(npx_initialstate, fsa, cpu_max_ext_state_size); }