Index: head/sys/arm/arm/bus_space_asm_generic.S =================================================================== --- head/sys/arm/arm/bus_space_asm_generic.S (revision 312291) +++ head/sys/arm/arm/bus_space_asm_generic.S (revision 312292) @@ -1,360 +1,359 @@ /* $NetBSD: bus_space_asm_generic.S,v 1.3 2003/03/27 19:46:14 mycroft Exp $ */ /*- * Copyright (c) 1997 Causality Limited. * Copyright (c) 1997 Mark Brinicombe. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Mark Brinicombe * for the NetBSD Project. * 4. The name of the company nor the name of the author may be used to * endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include -#include __FBSDID("$FreeBSD$"); /* * Generic bus_space functions. */ /* * read single */ ENTRY(generic_bs_r_1) ldrb r0, [r1, r2] RET END(generic_bs_r_1) ENTRY(generic_bs_r_2) ldrh r0, [r1, r2] RET END(generic_bs_r_2) ENTRY(generic_bs_r_4) ldr r0, [r1, r2] RET END(generic_bs_r_4) /* * write single */ ENTRY(generic_bs_w_1) strb r3, [r1, r2] RET END(generic_bs_w_1) ENTRY(generic_bs_w_2) strh r3, [r1, r2] RET END(generic_bs_w_2) ENTRY(generic_bs_w_4) str r3, [r1, r2] RET END(generic_bs_w_4) /* * read multiple */ ENTRY(generic_bs_rm_1) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldrb r3, [r0] strb r3, [r1], #1 subs r2, r2, #1 bne 1b RET END(generic_bs_rm_1) ENTRY(generic_bs_rm_2) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldrh r3, [r0] strh r3, [r1], #2 subs r2, r2, #1 bne 1b RET END(generic_bs_rm_2) ENTRY(generic_bs_rm_4) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldr r3, [r0] str r3, [r1], #4 subs r2, r2, #1 bne 1b RET END(generic_bs_rm_4) /* * write multiple */ ENTRY(generic_bs_wm_1) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldrb r3, [r1], #1 strb r3, [r0] subs r2, r2, #1 bne 1b RET END(generic_bs_wm_1) ENTRY(generic_bs_wm_2) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldrh r3, [r1], #2 strh r3, [r0] subs r2, r2, #1 bne 1b RET END(generic_bs_wm_2) ENTRY(generic_bs_wm_4) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldr r3, [r1], #4 str r3, [r0] subs r2, r2, #1 bne 1b RET END(generic_bs_wm_4) /* * read region */ ENTRY(generic_bs_rr_1) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldrb r3, [r0], #1 strb r3, [r1], #1 subs r2, r2, #1 bne 1b RET END(generic_bs_rr_1) ENTRY(generic_bs_rr_2) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldrh r3, [r0], #2 strh r3, [r1], #2 subs r2, r2, #1 bne 1b RET END(generic_bs_rr_2) ENTRY(generic_bs_rr_4) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldr r3, [r0], #4 str r3, [r1], #4 subs r2, r2, #1 bne 1b RET END(generic_bs_rr_4) /* * write region. */ ENTRY(generic_bs_wr_1) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldrb r3, [r1], #1 strb r3, [r0], #1 subs r2, r2, #1 bne 1b RET END(generic_bs_wr_1) ENTRY(generic_bs_wr_2) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldrh r3, [r1], #2 strh r3, [r0], #2 subs r2, r2, #1 bne 1b RET END(generic_bs_wr_2) ENTRY(generic_bs_wr_4) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: ldr r3, [r1], #4 str r3, [r0], #4 subs r2, r2, #1 bne 1b RET END(generic_bs_wr_4) /* * set region */ ENTRY(generic_bs_sr_1) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: strb r1, [r0], #1 subs r2, r2, #1 bne 1b RET END(generic_bs_sr_1) ENTRY(generic_bs_sr_2) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: strh r1, [r0], #2 subs r2, r2, #1 bne 1b RET END(generic_bs_sr_2) ENTRY(generic_bs_sr_4) add r0, r1, r2 mov r1, r3 ldr r2, [sp, #0] teq r2, #0 RETeq 1: str r1, [r0], #4 subs r2, r2, #1 bne 1b RET END(generic_bs_sr_4) /* * copy region */ ENTRY(generic_bs_c_2) add r0, r1, r2 ldr r2, [sp, #0] add r1, r2, r3 ldr r2, [sp, #4] teq r2, #0 RETeq cmp r0, r1 blt 2f 1: ldrh r3, [r0], #2 strh r3, [r1], #2 subs r2, r2, #1 bne 1b RET 2: add r0, r0, r2, lsl #1 add r1, r1, r2, lsl #1 sub r0, r0, #2 sub r1, r1, #2 3: ldrh r3, [r0], #-2 strh r3, [r1], #-2 subs r2, r2, #1 bne 3b RET END(generic_bs_c_2) Index: head/sys/arm/arm/cpufunc.c =================================================================== --- head/sys/arm/arm/cpufunc.c (revision 312291) +++ head/sys/arm/arm/cpufunc.c (revision 312292) @@ -1,1019 +1,1018 @@ /* $NetBSD: cpufunc.c,v 1.65 2003/11/05 12:53:15 scw Exp $ */ /*- * arm9 support code Copyright (C) 2001 ARM Ltd * Copyright (c) 1997 Mark Brinicombe. * Copyright (c) 1997 Causality Limited * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Causality Limited. * 4. The name of Causality Limited may not be used to endorse or promote * products derived from this software without specific prior written * permission. * * THIS SOFTWARE IS PROVIDED BY CAUSALITY LIMITED ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL CAUSALITY LIMITED BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * RiscBSD kernel project * * cpufuncs.c * * C functions for supporting CPU / MMU / TLB specific operations. * * Created : 30/01/97 */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include -#include #include #if defined(CPU_XSCALE_81342) #include #endif #ifdef CPU_XSCALE_IXP425 #include #include #endif /* PRIMARY CACHE VARIABLES */ int arm_picache_size; int arm_picache_line_size; int arm_picache_ways; int arm_pdcache_size; /* and unified */ int arm_pdcache_line_size; int arm_pdcache_ways; int arm_pcache_type; int arm_pcache_unified; int arm_dcache_align; int arm_dcache_align_mask; u_int arm_cache_level; u_int arm_cache_type[14]; u_int arm_cache_loc; #ifdef CPU_ARM9 struct cpu_functions arm9_cpufuncs = { /* CPU functions */ cpufunc_nullop, /* cpwait */ /* MMU functions */ cpufunc_control, /* control */ arm9_setttb, /* Setttb */ /* TLB functions */ armv4_tlb_flushID, /* tlb_flushID */ arm9_tlb_flushID_SE, /* tlb_flushID_SE */ armv4_tlb_flushD, /* tlb_flushD */ armv4_tlb_flushD_SE, /* tlb_flushD_SE */ /* Cache operations */ arm9_icache_sync_range, /* icache_sync_range */ arm9_dcache_wbinv_all, /* dcache_wbinv_all */ arm9_dcache_wbinv_range, /* dcache_wbinv_range */ arm9_dcache_inv_range, /* dcache_inv_range */ arm9_dcache_wb_range, /* dcache_wb_range */ armv4_idcache_inv_all, /* idcache_inv_all */ arm9_idcache_wbinv_all, /* idcache_wbinv_all */ arm9_idcache_wbinv_range, /* idcache_wbinv_range */ cpufunc_nullop, /* l2cache_wbinv_all */ (void *)cpufunc_nullop, /* l2cache_wbinv_range */ (void *)cpufunc_nullop, /* l2cache_inv_range */ (void *)cpufunc_nullop, /* l2cache_wb_range */ (void *)cpufunc_nullop, /* l2cache_drain_writebuf */ /* Other functions */ armv4_drain_writebuf, /* drain_writebuf */ (void *)cpufunc_nullop, /* sleep */ /* Soft functions */ arm9_context_switch, /* context_switch */ arm9_setup /* cpu setup */ }; #endif /* CPU_ARM9 */ #if defined(CPU_ARM9E) struct cpu_functions armv5_ec_cpufuncs = { /* CPU functions */ cpufunc_nullop, /* cpwait */ /* MMU functions */ cpufunc_control, /* control */ armv5_ec_setttb, /* Setttb */ /* TLB functions */ armv4_tlb_flushID, /* tlb_flushID */ arm9_tlb_flushID_SE, /* tlb_flushID_SE */ armv4_tlb_flushD, /* tlb_flushD */ armv4_tlb_flushD_SE, /* tlb_flushD_SE */ /* Cache operations */ armv5_ec_icache_sync_range, /* icache_sync_range */ armv5_ec_dcache_wbinv_all, /* dcache_wbinv_all */ armv5_ec_dcache_wbinv_range, /* dcache_wbinv_range */ armv5_ec_dcache_inv_range, /* dcache_inv_range */ armv5_ec_dcache_wb_range, /* dcache_wb_range */ armv4_idcache_inv_all, /* idcache_inv_all */ armv5_ec_idcache_wbinv_all, /* idcache_wbinv_all */ armv5_ec_idcache_wbinv_range, /* idcache_wbinv_range */ cpufunc_nullop, /* l2cache_wbinv_all */ (void *)cpufunc_nullop, /* l2cache_wbinv_range */ (void *)cpufunc_nullop, /* l2cache_inv_range */ (void *)cpufunc_nullop, /* l2cache_wb_range */ (void *)cpufunc_nullop, /* l2cache_drain_writebuf */ /* Other functions */ armv4_drain_writebuf, /* drain_writebuf */ (void *)cpufunc_nullop, /* sleep */ /* Soft functions */ arm9_context_switch, /* context_switch */ arm10_setup /* cpu setup */ }; struct cpu_functions sheeva_cpufuncs = { /* CPU functions */ cpufunc_nullop, /* cpwait */ /* MMU functions */ cpufunc_control, /* control */ sheeva_setttb, /* Setttb */ /* TLB functions */ armv4_tlb_flushID, /* tlb_flushID */ arm9_tlb_flushID_SE, /* tlb_flushID_SE */ armv4_tlb_flushD, /* tlb_flushD */ armv4_tlb_flushD_SE, /* tlb_flushD_SE */ /* Cache operations */ armv5_ec_icache_sync_range, /* icache_sync_range */ armv5_ec_dcache_wbinv_all, /* dcache_wbinv_all */ sheeva_dcache_wbinv_range, /* dcache_wbinv_range */ sheeva_dcache_inv_range, /* dcache_inv_range */ sheeva_dcache_wb_range, /* dcache_wb_range */ armv4_idcache_inv_all, /* idcache_inv_all */ armv5_ec_idcache_wbinv_all, /* idcache_wbinv_all */ sheeva_idcache_wbinv_range, /* idcache_wbinv_all */ sheeva_l2cache_wbinv_all, /* l2cache_wbinv_all */ sheeva_l2cache_wbinv_range, /* l2cache_wbinv_range */ sheeva_l2cache_inv_range, /* l2cache_inv_range */ sheeva_l2cache_wb_range, /* l2cache_wb_range */ (void *)cpufunc_nullop, /* l2cache_drain_writebuf */ /* Other functions */ armv4_drain_writebuf, /* drain_writebuf */ sheeva_cpu_sleep, /* sleep */ /* Soft functions */ arm9_context_switch, /* context_switch */ arm10_setup /* cpu setup */ }; #endif /* CPU_ARM9E */ #ifdef CPU_MV_PJ4B struct cpu_functions pj4bv7_cpufuncs = { /* Cache operations */ .cf_l2cache_wbinv_all = (void *)cpufunc_nullop, .cf_l2cache_wbinv_range = (void *)cpufunc_nullop, .cf_l2cache_inv_range = (void *)cpufunc_nullop, .cf_l2cache_wb_range = (void *)cpufunc_nullop, .cf_l2cache_drain_writebuf = (void *)cpufunc_nullop, /* Other functions */ .cf_sleep = (void *)cpufunc_nullop, /* Soft functions */ .cf_setup = pj4bv7_setup }; #endif /* CPU_MV_PJ4B */ #if defined(CPU_XSCALE_PXA2X0) || defined(CPU_XSCALE_IXP425) struct cpu_functions xscale_cpufuncs = { /* CPU functions */ xscale_cpwait, /* cpwait */ /* MMU functions */ xscale_control, /* control */ xscale_setttb, /* setttb */ /* TLB functions */ armv4_tlb_flushID, /* tlb_flushID */ xscale_tlb_flushID_SE, /* tlb_flushID_SE */ armv4_tlb_flushD, /* tlb_flushD */ armv4_tlb_flushD_SE, /* tlb_flushD_SE */ /* Cache operations */ xscale_cache_syncI_rng, /* icache_sync_range */ xscale_cache_purgeD, /* dcache_wbinv_all */ xscale_cache_purgeD_rng, /* dcache_wbinv_range */ xscale_cache_flushD_rng, /* dcache_inv_range */ xscale_cache_cleanD_rng, /* dcache_wb_range */ xscale_cache_flushID, /* idcache_inv_all */ xscale_cache_purgeID, /* idcache_wbinv_all */ xscale_cache_purgeID_rng, /* idcache_wbinv_range */ cpufunc_nullop, /* l2cache_wbinv_all */ (void *)cpufunc_nullop, /* l2cache_wbinv_range */ (void *)cpufunc_nullop, /* l2cache_inv_range */ (void *)cpufunc_nullop, /* l2cache_wb_range */ (void *)cpufunc_nullop, /* l2cache_drain_writebuf */ /* Other functions */ armv4_drain_writebuf, /* drain_writebuf */ xscale_cpu_sleep, /* sleep */ /* Soft functions */ xscale_context_switch, /* context_switch */ xscale_setup /* cpu setup */ }; #endif /* CPU_XSCALE_PXA2X0 || CPU_XSCALE_IXP425 */ #ifdef CPU_XSCALE_81342 struct cpu_functions xscalec3_cpufuncs = { /* CPU functions */ xscale_cpwait, /* cpwait */ /* MMU functions */ xscale_control, /* control */ xscalec3_setttb, /* setttb */ /* TLB functions */ armv4_tlb_flushID, /* tlb_flushID */ xscale_tlb_flushID_SE, /* tlb_flushID_SE */ armv4_tlb_flushD, /* tlb_flushD */ armv4_tlb_flushD_SE, /* tlb_flushD_SE */ /* Cache operations */ xscalec3_cache_syncI_rng, /* icache_sync_range */ xscalec3_cache_purgeD, /* dcache_wbinv_all */ xscalec3_cache_purgeD_rng, /* dcache_wbinv_range */ xscale_cache_flushD_rng, /* dcache_inv_range */ xscalec3_cache_cleanD_rng, /* dcache_wb_range */ xscale_cache_flushID, /* idcache_inv_all */ xscalec3_cache_purgeID, /* idcache_wbinv_all */ xscalec3_cache_purgeID_rng, /* idcache_wbinv_range */ xscalec3_l2cache_purge, /* l2cache_wbinv_all */ xscalec3_l2cache_purge_rng, /* l2cache_wbinv_range */ xscalec3_l2cache_flush_rng, /* l2cache_inv_range */ xscalec3_l2cache_clean_rng, /* l2cache_wb_range */ (void *)cpufunc_nullop, /* l2cache_drain_writebuf */ /* Other functions */ armv4_drain_writebuf, /* drain_writebuf */ xscale_cpu_sleep, /* sleep */ /* Soft functions */ xscalec3_context_switch, /* context_switch */ xscale_setup /* cpu setup */ }; #endif /* CPU_XSCALE_81342 */ #if defined(CPU_FA526) struct cpu_functions fa526_cpufuncs = { /* CPU functions */ cpufunc_nullop, /* cpwait */ /* MMU functions */ cpufunc_control, /* control */ fa526_setttb, /* setttb */ /* TLB functions */ armv4_tlb_flushID, /* tlb_flushID */ fa526_tlb_flushID_SE, /* tlb_flushID_SE */ armv4_tlb_flushD, /* tlb_flushD */ armv4_tlb_flushD_SE, /* tlb_flushD_SE */ /* Cache operations */ fa526_icache_sync_range, /* icache_sync_range */ fa526_dcache_wbinv_all, /* dcache_wbinv_all */ fa526_dcache_wbinv_range, /* dcache_wbinv_range */ fa526_dcache_inv_range, /* dcache_inv_range */ fa526_dcache_wb_range, /* dcache_wb_range */ armv4_idcache_inv_all, /* idcache_inv_all */ fa526_idcache_wbinv_all, /* idcache_wbinv_all */ fa526_idcache_wbinv_range, /* idcache_wbinv_range */ cpufunc_nullop, /* l2cache_wbinv_all */ (void *)cpufunc_nullop, /* l2cache_wbinv_range */ (void *)cpufunc_nullop, /* l2cache_inv_range */ (void *)cpufunc_nullop, /* l2cache_wb_range */ (void *)cpufunc_nullop, /* l2cache_drain_writebuf */ /* Other functions */ armv4_drain_writebuf, /* drain_writebuf */ fa526_cpu_sleep, /* sleep */ /* Soft functions */ fa526_context_switch, /* context_switch */ fa526_setup /* cpu setup */ }; #endif /* CPU_FA526 */ #if defined(CPU_ARM1176) struct cpu_functions arm1176_cpufuncs = { /* Cache operations */ .cf_l2cache_wbinv_all = (void *)cpufunc_nullop, .cf_l2cache_wbinv_range = (void *)cpufunc_nullop, .cf_l2cache_inv_range = (void *)cpufunc_nullop, .cf_l2cache_wb_range = (void *)cpufunc_nullop, .cf_l2cache_drain_writebuf = (void *)cpufunc_nullop, /* Other functions */ .cf_sleep = arm11x6_sleep, /* Soft functions */ .cf_setup = arm11x6_setup }; #endif /*CPU_ARM1176 */ #if defined(CPU_CORTEXA8) || defined(CPU_CORTEXA_MP) || defined(CPU_KRAIT) struct cpu_functions cortexa_cpufuncs = { /* Cache operations */ /* * Note: For CPUs using the PL310 the L2 ops are filled in when the * L2 cache controller is actually enabled. */ .cf_l2cache_wbinv_all = cpufunc_nullop, .cf_l2cache_wbinv_range = (void *)cpufunc_nullop, .cf_l2cache_inv_range = (void *)cpufunc_nullop, .cf_l2cache_wb_range = (void *)cpufunc_nullop, .cf_l2cache_drain_writebuf = (void *)cpufunc_nullop, /* Other functions */ .cf_sleep = armv7_cpu_sleep, /* Soft functions */ .cf_setup = cortexa_setup }; #endif /* CPU_CORTEXA8 || CPU_CORTEXA_MP || CPU_KRAIT */ /* * Global constants also used by locore.s */ struct cpu_functions cpufuncs; u_int cputype; #if __ARM_ARCH <= 5 u_int cpu_reset_needs_v4_MMU_disable; /* flag used in locore-v4.s */ #endif #if defined(CPU_ARM9) || \ defined (CPU_ARM9E) || \ defined(CPU_ARM1176) || \ defined(CPU_XSCALE_PXA2X0) || defined(CPU_XSCALE_IXP425) || \ defined(CPU_FA526) || defined(CPU_MV_PJ4B) || \ defined(CPU_XSCALE_81342) || \ defined(CPU_CORTEXA8) || defined(CPU_CORTEXA_MP) || defined(CPU_KRAIT) /* Global cache line sizes, use 32 as default */ int arm_dcache_min_line_size = 32; int arm_icache_min_line_size = 32; int arm_idcache_min_line_size = 32; static void get_cachetype_cp15(void); /* Additional cache information local to this file. Log2 of some of the above numbers. */ static int arm_dcache_l2_nsets; static int arm_dcache_l2_assoc; static int arm_dcache_l2_linesize; static void get_cachetype_cp15(void) { u_int ctype, isize, dsize, cpuid; u_int clevel, csize, i, sel; u_int multiplier; u_char type; __asm __volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctype)); cpuid = cpu_ident(); /* * ...and thus spake the ARM ARM: * * If an value corresponding to an unimplemented or * reserved ID register is encountered, the System Control * processor returns the value of the main ID register. */ if (ctype == cpuid) goto out; if (CPU_CT_FORMAT(ctype) == CPU_CT_ARMV7) { /* Resolve minimal cache line sizes */ arm_dcache_min_line_size = 1 << (CPU_CT_DMINLINE(ctype) + 2); arm_icache_min_line_size = 1 << (CPU_CT_IMINLINE(ctype) + 2); arm_idcache_min_line_size = min(arm_icache_min_line_size, arm_dcache_min_line_size); __asm __volatile("mrc p15, 1, %0, c0, c0, 1" : "=r" (clevel)); arm_cache_level = clevel; arm_cache_loc = CPU_CLIDR_LOC(arm_cache_level); i = 0; while ((type = (clevel & 0x7)) && i < 7) { if (type == CACHE_DCACHE || type == CACHE_UNI_CACHE || type == CACHE_SEP_CACHE) { sel = i << 1; __asm __volatile("mcr p15, 2, %0, c0, c0, 0" : : "r" (sel)); __asm __volatile("mrc p15, 1, %0, c0, c0, 0" : "=r" (csize)); arm_cache_type[sel] = csize; arm_dcache_align = 1 << (CPUV7_CT_xSIZE_LEN(csize) + 4); arm_dcache_align_mask = arm_dcache_align - 1; } if (type == CACHE_ICACHE || type == CACHE_SEP_CACHE) { sel = (i << 1) | 1; __asm __volatile("mcr p15, 2, %0, c0, c0, 0" : : "r" (sel)); __asm __volatile("mrc p15, 1, %0, c0, c0, 0" : "=r" (csize)); arm_cache_type[sel] = csize; } i++; clevel >>= 3; } } else { if ((ctype & CPU_CT_S) == 0) arm_pcache_unified = 1; /* * If you want to know how this code works, go read the ARM ARM. */ arm_pcache_type = CPU_CT_CTYPE(ctype); if (arm_pcache_unified == 0) { isize = CPU_CT_ISIZE(ctype); multiplier = (isize & CPU_CT_xSIZE_M) ? 3 : 2; arm_picache_line_size = 1U << (CPU_CT_xSIZE_LEN(isize) + 3); if (CPU_CT_xSIZE_ASSOC(isize) == 0) { if (isize & CPU_CT_xSIZE_M) arm_picache_line_size = 0; /* not present */ else arm_picache_ways = 1; } else { arm_picache_ways = multiplier << (CPU_CT_xSIZE_ASSOC(isize) - 1); } arm_picache_size = multiplier << (CPU_CT_xSIZE_SIZE(isize) + 8); } dsize = CPU_CT_DSIZE(ctype); multiplier = (dsize & CPU_CT_xSIZE_M) ? 3 : 2; arm_pdcache_line_size = 1U << (CPU_CT_xSIZE_LEN(dsize) + 3); if (CPU_CT_xSIZE_ASSOC(dsize) == 0) { if (dsize & CPU_CT_xSIZE_M) arm_pdcache_line_size = 0; /* not present */ else arm_pdcache_ways = 1; } else { arm_pdcache_ways = multiplier << (CPU_CT_xSIZE_ASSOC(dsize) - 1); } arm_pdcache_size = multiplier << (CPU_CT_xSIZE_SIZE(dsize) + 8); arm_dcache_align = arm_pdcache_line_size; arm_dcache_l2_assoc = CPU_CT_xSIZE_ASSOC(dsize) + multiplier - 2; arm_dcache_l2_linesize = CPU_CT_xSIZE_LEN(dsize) + 3; arm_dcache_l2_nsets = 6 + CPU_CT_xSIZE_SIZE(dsize) - CPU_CT_xSIZE_ASSOC(dsize) - CPU_CT_xSIZE_LEN(dsize); out: arm_dcache_align_mask = arm_dcache_align - 1; } } #endif /* ARM9 || XSCALE */ /* * Cannot panic here as we may not have a console yet ... */ int set_cpufuncs(void) { cputype = cpu_ident(); cputype &= CPU_ID_CPU_MASK; #ifdef CPU_ARM9 if (((cputype & CPU_ID_IMPLEMENTOR_MASK) == CPU_ID_ARM_LTD || (cputype & CPU_ID_IMPLEMENTOR_MASK) == CPU_ID_TI) && (cputype & 0x0000f000) == 0x00009000) { cpufuncs = arm9_cpufuncs; cpu_reset_needs_v4_MMU_disable = 1; /* V4 or higher */ get_cachetype_cp15(); arm9_dcache_sets_inc = 1U << arm_dcache_l2_linesize; arm9_dcache_sets_max = (1U << (arm_dcache_l2_linesize + arm_dcache_l2_nsets)) - arm9_dcache_sets_inc; arm9_dcache_index_inc = 1U << (32 - arm_dcache_l2_assoc); arm9_dcache_index_max = 0U - arm9_dcache_index_inc; pmap_pte_init_generic(); goto out; } #endif /* CPU_ARM9 */ #if defined(CPU_ARM9E) if (cputype == CPU_ID_MV88FR131 || cputype == CPU_ID_MV88FR571_VD || cputype == CPU_ID_MV88FR571_41) { uint32_t sheeva_ctrl; sheeva_ctrl = (MV_DC_STREAM_ENABLE | MV_BTB_DISABLE | MV_L2_ENABLE); /* * Workaround for Marvell MV78100 CPU: Cache prefetch * mechanism may affect the cache coherency validity, * so it needs to be disabled. * * Refer to errata document MV-S501058-00C.pdf (p. 3.1 * L2 Prefetching Mechanism) for details. */ if (cputype == CPU_ID_MV88FR571_VD || cputype == CPU_ID_MV88FR571_41) sheeva_ctrl |= MV_L2_PREFETCH_DISABLE; sheeva_control_ext(0xffffffff & ~MV_WA_ENABLE, sheeva_ctrl); cpufuncs = sheeva_cpufuncs; get_cachetype_cp15(); pmap_pte_init_generic(); goto out; } else if (cputype == CPU_ID_ARM926EJS) { cpufuncs = armv5_ec_cpufuncs; get_cachetype_cp15(); pmap_pte_init_generic(); goto out; } #endif /* CPU_ARM9E */ #if defined(CPU_ARM1176) if (cputype == CPU_ID_ARM1176JZS) { cpufuncs = arm1176_cpufuncs; get_cachetype_cp15(); goto out; } #endif /* CPU_ARM1176 */ #if defined(CPU_CORTEXA8) || defined(CPU_CORTEXA_MP) || defined(CPU_KRAIT) switch(cputype & CPU_ID_SCHEME_MASK) { case CPU_ID_CORTEXA5: case CPU_ID_CORTEXA7: case CPU_ID_CORTEXA8: case CPU_ID_CORTEXA9: case CPU_ID_CORTEXA12: case CPU_ID_CORTEXA15: case CPU_ID_CORTEXA53: case CPU_ID_CORTEXA57: case CPU_ID_CORTEXA72: case CPU_ID_KRAIT300: cpufuncs = cortexa_cpufuncs; get_cachetype_cp15(); goto out; default: break; } #endif /* CPU_CORTEXA8 || CPU_CORTEXA_MP || CPU_KRAIT */ #if defined(CPU_MV_PJ4B) if (cputype == CPU_ID_MV88SV581X_V7 || cputype == CPU_ID_MV88SV584X_V7 || cputype == CPU_ID_ARM_88SV581X_V7) { cpufuncs = pj4bv7_cpufuncs; get_cachetype_cp15(); goto out; } #endif /* CPU_MV_PJ4B */ #if defined(CPU_FA526) if (cputype == CPU_ID_FA526 || cputype == CPU_ID_FA626TE) { cpufuncs = fa526_cpufuncs; cpu_reset_needs_v4_MMU_disable = 1; /* SA needs it */ get_cachetype_cp15(); pmap_pte_init_generic(); goto out; } #endif /* CPU_FA526 */ #if defined(CPU_XSCALE_81342) if (cputype == CPU_ID_81342) { cpufuncs = xscalec3_cpufuncs; cpu_reset_needs_v4_MMU_disable = 1; /* XScale needs it */ get_cachetype_cp15(); pmap_pte_init_xscale(); goto out; } #endif /* CPU_XSCALE_81342 */ #ifdef CPU_XSCALE_PXA2X0 /* ignore core revision to test PXA2xx CPUs */ if ((cputype & ~CPU_ID_XSCALE_COREREV_MASK) == CPU_ID_PXA250 || (cputype & ~CPU_ID_XSCALE_COREREV_MASK) == CPU_ID_PXA27X || (cputype & ~CPU_ID_XSCALE_COREREV_MASK) == CPU_ID_PXA210) { cpufuncs = xscale_cpufuncs; cpu_reset_needs_v4_MMU_disable = 1; /* XScale needs it */ get_cachetype_cp15(); pmap_pte_init_xscale(); goto out; } #endif /* CPU_XSCALE_PXA2X0 */ #ifdef CPU_XSCALE_IXP425 if (cputype == CPU_ID_IXP425_533 || cputype == CPU_ID_IXP425_400 || cputype == CPU_ID_IXP425_266 || cputype == CPU_ID_IXP435) { cpufuncs = xscale_cpufuncs; cpu_reset_needs_v4_MMU_disable = 1; /* XScale needs it */ get_cachetype_cp15(); pmap_pte_init_xscale(); goto out; } #endif /* CPU_XSCALE_IXP425 */ /* * Bzzzz. And the answer was ... */ panic("No support for this CPU type (%08x) in kernel", cputype); return(ARCHITECTURE_NOT_PRESENT); out: uma_set_align(arm_dcache_align_mask); return (0); } /* * CPU Setup code */ #ifdef CPU_ARM9 void arm9_setup(void) { int cpuctrl, cpuctrlmask; cpuctrl = CPU_CONTROL_MMU_ENABLE | CPU_CONTROL_32BP_ENABLE | CPU_CONTROL_32BD_ENABLE | CPU_CONTROL_SYST_ENABLE | CPU_CONTROL_IC_ENABLE | CPU_CONTROL_DC_ENABLE | CPU_CONTROL_WBUF_ENABLE | CPU_CONTROL_LABT_ENABLE | CPU_CONTROL_ROUNDROBIN; cpuctrlmask = CPU_CONTROL_MMU_ENABLE | CPU_CONTROL_32BP_ENABLE | CPU_CONTROL_32BD_ENABLE | CPU_CONTROL_SYST_ENABLE | CPU_CONTROL_IC_ENABLE | CPU_CONTROL_DC_ENABLE | CPU_CONTROL_WBUF_ENABLE | CPU_CONTROL_ROM_ENABLE | CPU_CONTROL_BEND_ENABLE | CPU_CONTROL_AFLT_ENABLE | CPU_CONTROL_LABT_ENABLE | CPU_CONTROL_VECRELOC | CPU_CONTROL_ROUNDROBIN; #ifndef ARM32_DISABLE_ALIGNMENT_FAULTS cpuctrl |= CPU_CONTROL_AFLT_ENABLE; #endif #ifdef __ARMEB__ cpuctrl |= CPU_CONTROL_BEND_ENABLE; #endif if (vector_page == ARM_VECTORS_HIGH) cpuctrl |= CPU_CONTROL_VECRELOC; /* Clear out the cache */ cpu_idcache_wbinv_all(); /* Set the control register (SCTLR) */ cpu_control(cpuctrlmask, cpuctrl); } #endif /* CPU_ARM9 */ #if defined(CPU_ARM9E) void arm10_setup(void) { int cpuctrl, cpuctrlmask; cpuctrl = CPU_CONTROL_MMU_ENABLE | CPU_CONTROL_SYST_ENABLE | CPU_CONTROL_IC_ENABLE | CPU_CONTROL_DC_ENABLE | CPU_CONTROL_WBUF_ENABLE | CPU_CONTROL_BPRD_ENABLE; cpuctrlmask = CPU_CONTROL_MMU_ENABLE | CPU_CONTROL_SYST_ENABLE | CPU_CONTROL_IC_ENABLE | CPU_CONTROL_DC_ENABLE | CPU_CONTROL_WBUF_ENABLE | CPU_CONTROL_ROM_ENABLE | CPU_CONTROL_BEND_ENABLE | CPU_CONTROL_AFLT_ENABLE | CPU_CONTROL_BPRD_ENABLE | CPU_CONTROL_ROUNDROBIN | CPU_CONTROL_CPCLK; #ifndef ARM32_DISABLE_ALIGNMENT_FAULTS cpuctrl |= CPU_CONTROL_AFLT_ENABLE; #endif #ifdef __ARMEB__ cpuctrl |= CPU_CONTROL_BEND_ENABLE; #endif /* Clear out the cache */ cpu_idcache_wbinv_all(); /* Now really make sure they are clean. */ __asm __volatile ("mcr\tp15, 0, r0, c7, c7, 0" : : ); if (vector_page == ARM_VECTORS_HIGH) cpuctrl |= CPU_CONTROL_VECRELOC; /* Set the control register */ cpu_control(0xffffffff, cpuctrl); /* And again. */ cpu_idcache_wbinv_all(); } #endif /* CPU_ARM9E || CPU_ARM10 */ #if defined(CPU_ARM1176) \ || defined(CPU_MV_PJ4B) \ || defined(CPU_CORTEXA8) || defined(CPU_CORTEXA_MP) || defined(CPU_KRAIT) static __inline void cpu_scc_setup_ccnt(void) { /* This is how you give userland access to the CCNT and PMCn * registers. * BEWARE! This gives write access also, which may not be what * you want! */ #ifdef _PMC_USER_READ_WRITE_ /* Set PMUSERENR[0] to allow userland access */ cp15_pmuserenr_set(1); #endif #if defined(CPU_ARM1176) /* Set PMCR[2,0] to enable counters and reset CCNT */ cp15_pmcr_set(5); #else /* Set up the PMCCNTR register as a cyclecounter: * Set PMINTENCLR to 0xFFFFFFFF to block interrupts * Set PMCR[2,0] to enable counters and reset CCNT * Set PMCNTENSET to 0x80000000 to enable CCNT */ cp15_pminten_clr(0xFFFFFFFF); cp15_pmcr_set(5); cp15_pmcnten_set(0x80000000); #endif } #endif #if defined(CPU_ARM1176) void arm11x6_setup(void) { uint32_t auxctrl, auxctrl_wax; uint32_t tmp, tmp2; uint32_t cpuid; cpuid = cpu_ident(); auxctrl = 0; auxctrl_wax = ~0; /* * Enable an errata workaround */ if ((cpuid & CPU_ID_CPU_MASK) == CPU_ID_ARM1176JZS) { /* ARM1176JZSr0 */ auxctrl = ARM1176_AUXCTL_PHD; auxctrl_wax = ~ARM1176_AUXCTL_PHD; } tmp = cp15_actlr_get(); tmp2 = tmp; tmp &= auxctrl_wax; tmp |= auxctrl; if (tmp != tmp2) cp15_actlr_set(tmp); cpu_scc_setup_ccnt(); } #endif /* CPU_ARM1176 */ #ifdef CPU_MV_PJ4B void pj4bv7_setup(void) { pj4b_config(); cpu_scc_setup_ccnt(); } #endif /* CPU_MV_PJ4B */ #if defined(CPU_CORTEXA8) || defined(CPU_CORTEXA_MP) || defined(CPU_KRAIT) void cortexa_setup(void) { cpu_scc_setup_ccnt(); } #endif /* CPU_CORTEXA8 || CPU_CORTEXA_MP || CPU_KRAIT */ #if defined(CPU_FA526) void fa526_setup(void) { int cpuctrl, cpuctrlmask; cpuctrl = CPU_CONTROL_MMU_ENABLE | CPU_CONTROL_32BP_ENABLE | CPU_CONTROL_32BD_ENABLE | CPU_CONTROL_SYST_ENABLE | CPU_CONTROL_IC_ENABLE | CPU_CONTROL_DC_ENABLE | CPU_CONTROL_WBUF_ENABLE | CPU_CONTROL_LABT_ENABLE | CPU_CONTROL_BPRD_ENABLE; cpuctrlmask = CPU_CONTROL_MMU_ENABLE | CPU_CONTROL_32BP_ENABLE | CPU_CONTROL_32BD_ENABLE | CPU_CONTROL_SYST_ENABLE | CPU_CONTROL_IC_ENABLE | CPU_CONTROL_DC_ENABLE | CPU_CONTROL_WBUF_ENABLE | CPU_CONTROL_ROM_ENABLE | CPU_CONTROL_BEND_ENABLE | CPU_CONTROL_AFLT_ENABLE | CPU_CONTROL_LABT_ENABLE | CPU_CONTROL_BPRD_ENABLE | CPU_CONTROL_CPCLK | CPU_CONTROL_VECRELOC; #ifndef ARM32_DISABLE_ALIGNMENT_FAULTS cpuctrl |= CPU_CONTROL_AFLT_ENABLE; #endif #ifdef __ARMEB__ cpuctrl |= CPU_CONTROL_BEND_ENABLE; #endif if (vector_page == ARM_VECTORS_HIGH) cpuctrl |= CPU_CONTROL_VECRELOC; /* Clear out the cache */ cpu_idcache_wbinv_all(); /* Set the control register */ cpu_control(0xffffffff, cpuctrl); } #endif /* CPU_FA526 */ #if defined(CPU_XSCALE_PXA2X0) || defined(CPU_XSCALE_IXP425) || \ defined(CPU_XSCALE_81342) void xscale_setup(void) { uint32_t auxctl; int cpuctrl, cpuctrlmask; /* * The XScale Write Buffer is always enabled. Our option * is to enable/disable coalescing. Note that bits 6:3 * must always be enabled. */ cpuctrl = CPU_CONTROL_MMU_ENABLE | CPU_CONTROL_32BP_ENABLE | CPU_CONTROL_32BD_ENABLE | CPU_CONTROL_SYST_ENABLE | CPU_CONTROL_IC_ENABLE | CPU_CONTROL_DC_ENABLE | CPU_CONTROL_WBUF_ENABLE | CPU_CONTROL_LABT_ENABLE | CPU_CONTROL_BPRD_ENABLE; cpuctrlmask = CPU_CONTROL_MMU_ENABLE | CPU_CONTROL_32BP_ENABLE | CPU_CONTROL_32BD_ENABLE | CPU_CONTROL_SYST_ENABLE | CPU_CONTROL_IC_ENABLE | CPU_CONTROL_DC_ENABLE | CPU_CONTROL_WBUF_ENABLE | CPU_CONTROL_ROM_ENABLE | CPU_CONTROL_BEND_ENABLE | CPU_CONTROL_AFLT_ENABLE | CPU_CONTROL_LABT_ENABLE | CPU_CONTROL_BPRD_ENABLE | CPU_CONTROL_CPCLK | CPU_CONTROL_VECRELOC | \ CPU_CONTROL_L2_ENABLE; #ifndef ARM32_DISABLE_ALIGNMENT_FAULTS cpuctrl |= CPU_CONTROL_AFLT_ENABLE; #endif #ifdef __ARMEB__ cpuctrl |= CPU_CONTROL_BEND_ENABLE; #endif if (vector_page == ARM_VECTORS_HIGH) cpuctrl |= CPU_CONTROL_VECRELOC; #ifdef CPU_XSCALE_CORE3 cpuctrl |= CPU_CONTROL_L2_ENABLE; #endif /* Clear out the cache */ cpu_idcache_wbinv_all(); /* * Set the control register. Note that bits 6:3 must always * be set to 1. */ /* cpu_control(cpuctrlmask, cpuctrl);*/ cpu_control(0xffffffff, cpuctrl); /* Make sure write coalescing is turned on */ __asm __volatile("mrc p15, 0, %0, c1, c0, 1" : "=r" (auxctl)); #ifdef XSCALE_NO_COALESCE_WRITES auxctl |= XSCALE_AUXCTL_K; #else auxctl &= ~XSCALE_AUXCTL_K; #endif #ifdef CPU_XSCALE_CORE3 auxctl |= XSCALE_AUXCTL_LLR; auxctl |= XSCALE_AUXCTL_MD_MASK; #endif __asm __volatile("mcr p15, 0, %0, c1, c0, 1" : : "r" (auxctl)); } #endif /* CPU_XSCALE_PXA2X0 || CPU_XSCALE_IXP425 */ Index: head/sys/arm/arm/identcpu-v4.c =================================================================== --- head/sys/arm/arm/identcpu-v4.c (revision 312291) +++ head/sys/arm/arm/identcpu-v4.c (revision 312292) @@ -1,386 +1,385 @@ /* $NetBSD: cpu.c,v 1.55 2004/02/13 11:36:10 wiz Exp $ */ /*- * Copyright (c) 1995 Mark Brinicombe. * Copyright (c) 1995 Brini. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Brini. * 4. The name of the company nor the name of the author may be used to * endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY BRINI ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL BRINI OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * RiscBSD kernel project * * cpu.c * * Probing and configuration for the master CPU * * Created : 10/10/95 */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include -#include #include char machine[] = "arm"; SYSCTL_STRING(_hw, HW_MACHINE, machine, CTLFLAG_RD, machine, 0, "Machine class"); static const char * const generic_steppings[16] = { "rev 0", "rev 1", "rev 2", "rev 3", "rev 4", "rev 5", "rev 6", "rev 7", "rev 8", "rev 9", "rev 10", "rev 11", "rev 12", "rev 13", "rev 14", "rev 15", }; static const char * const xscale_steppings[16] = { "step A-0", "step A-1", "step B-0", "step C-0", "step D-0", "rev 5", "rev 6", "rev 7", "rev 8", "rev 9", "rev 10", "rev 11", "rev 12", "rev 13", "rev 14", "rev 15", }; static const char * const i80219_steppings[16] = { "step A-0", "rev 1", "rev 2", "rev 3", "rev 4", "rev 5", "rev 6", "rev 7", "rev 8", "rev 9", "rev 10", "rev 11", "rev 12", "rev 13", "rev 14", "rev 15", }; static const char * const i80321_steppings[16] = { "step A-0", "step B-0", "rev 2", "rev 3", "rev 4", "rev 5", "rev 6", "rev 7", "rev 8", "rev 9", "rev 10", "rev 11", "rev 12", "rev 13", "rev 14", "rev 15", }; static const char * const i81342_steppings[16] = { "step A-0", "rev 1", "rev 2", "rev 3", "rev 4", "rev 5", "rev 6", "rev 7", "rev 8", "rev 9", "rev 10", "rev 11", "rev 12", "rev 13", "rev 14", "rev 15", }; /* Steppings for PXA2[15]0 */ static const char * const pxa2x0_steppings[16] = { "step A-0", "step A-1", "step B-0", "step B-1", "step B-2", "step C-0", "rev 6", "rev 7", "rev 8", "rev 9", "rev 10", "rev 11", "rev 12", "rev 13", "rev 14", "rev 15", }; /* Steppings for PXA255/26x. * rev 5: PXA26x B0, rev 6: PXA255 A0 */ static const char * const pxa255_steppings[16] = { "rev 0", "rev 1", "rev 2", "step A-0", "rev 4", "step B-0", "step A-0", "rev 7", "rev 8", "rev 9", "rev 10", "rev 11", "rev 12", "rev 13", "rev 14", "rev 15", }; /* Stepping for PXA27x */ static const char * const pxa27x_steppings[16] = { "step A-0", "step A-1", "step B-0", "step B-1", "step C-0", "rev 5", "rev 6", "rev 7", "rev 8", "rev 9", "rev 10", "rev 11", "rev 12", "rev 13", "rev 14", "rev 15", }; static const char * const ixp425_steppings[16] = { "step 0 (A0)", "rev 1 (ARMv5TE)", "rev 2", "rev 3", "rev 4", "rev 5", "rev 6", "rev 7", "rev 8", "rev 9", "rev 10", "rev 11", "rev 12", "rev 13", "rev 14", "rev 15", }; struct cpuidtab { u_int32_t cpuid; enum cpu_class cpu_class; const char *cpu_name; const char * const *cpu_steppings; }; const struct cpuidtab cpuids[] = { { CPU_ID_ARM920T, CPU_CLASS_ARM9TDMI, "ARM920T", generic_steppings }, { CPU_ID_ARM920T_ALT, CPU_CLASS_ARM9TDMI, "ARM920T", generic_steppings }, { CPU_ID_ARM922T, CPU_CLASS_ARM9TDMI, "ARM922T", generic_steppings }, { CPU_ID_ARM926EJS, CPU_CLASS_ARM9EJS, "ARM926EJ-S", generic_steppings }, { CPU_ID_ARM940T, CPU_CLASS_ARM9TDMI, "ARM940T", generic_steppings }, { CPU_ID_ARM946ES, CPU_CLASS_ARM9ES, "ARM946E-S", generic_steppings }, { CPU_ID_ARM966ES, CPU_CLASS_ARM9ES, "ARM966E-S", generic_steppings }, { CPU_ID_ARM966ESR1, CPU_CLASS_ARM9ES, "ARM966E-S", generic_steppings }, { CPU_ID_FA526, CPU_CLASS_ARM9TDMI, "FA526", generic_steppings }, { CPU_ID_FA626TE, CPU_CLASS_ARM9ES, "FA626TE", generic_steppings }, { CPU_ID_TI925T, CPU_CLASS_ARM9TDMI, "TI ARM925T", generic_steppings }, { CPU_ID_ARM1020E, CPU_CLASS_ARM10E, "ARM1020E", generic_steppings }, { CPU_ID_ARM1022ES, CPU_CLASS_ARM10E, "ARM1022E-S", generic_steppings }, { CPU_ID_ARM1026EJS, CPU_CLASS_ARM10EJ, "ARM1026EJ-S", generic_steppings }, { CPU_ID_80200, CPU_CLASS_XSCALE, "i80200", xscale_steppings }, { CPU_ID_80321_400, CPU_CLASS_XSCALE, "i80321 400MHz", i80321_steppings }, { CPU_ID_80321_600, CPU_CLASS_XSCALE, "i80321 600MHz", i80321_steppings }, { CPU_ID_80321_400_B0, CPU_CLASS_XSCALE, "i80321 400MHz", i80321_steppings }, { CPU_ID_80321_600_B0, CPU_CLASS_XSCALE, "i80321 600MHz", i80321_steppings }, { CPU_ID_81342, CPU_CLASS_XSCALE, "i81342", i81342_steppings }, { CPU_ID_80219_400, CPU_CLASS_XSCALE, "i80219 400MHz", i80219_steppings }, { CPU_ID_80219_600, CPU_CLASS_XSCALE, "i80219 600MHz", i80219_steppings }, { CPU_ID_PXA27X, CPU_CLASS_XSCALE, "PXA27x", pxa27x_steppings }, { CPU_ID_PXA250A, CPU_CLASS_XSCALE, "PXA250", pxa2x0_steppings }, { CPU_ID_PXA210A, CPU_CLASS_XSCALE, "PXA210", pxa2x0_steppings }, { CPU_ID_PXA250B, CPU_CLASS_XSCALE, "PXA250", pxa2x0_steppings }, { CPU_ID_PXA210B, CPU_CLASS_XSCALE, "PXA210", pxa2x0_steppings }, { CPU_ID_PXA250C, CPU_CLASS_XSCALE, "PXA255", pxa255_steppings }, { CPU_ID_PXA210C, CPU_CLASS_XSCALE, "PXA210", pxa2x0_steppings }, { CPU_ID_IXP425_533, CPU_CLASS_XSCALE, "IXP425 533MHz", ixp425_steppings }, { CPU_ID_IXP425_400, CPU_CLASS_XSCALE, "IXP425 400MHz", ixp425_steppings }, { CPU_ID_IXP425_266, CPU_CLASS_XSCALE, "IXP425 266MHz", ixp425_steppings }, /* XXX ixp435 steppings? */ { CPU_ID_IXP435, CPU_CLASS_XSCALE, "IXP435", ixp425_steppings }, { CPU_ID_MV88FR131, CPU_CLASS_MARVELL, "Feroceon 88FR131", generic_steppings }, { CPU_ID_MV88FR571_VD, CPU_CLASS_MARVELL, "Feroceon 88FR571-VD", generic_steppings }, { 0, CPU_CLASS_NONE, NULL, NULL } }; struct cpu_classtab { const char *class_name; const char *class_option; }; const struct cpu_classtab cpu_classes[] = { { "unknown", NULL }, /* CPU_CLASS_NONE */ { "ARM9TDMI", "CPU_ARM9TDMI" }, /* CPU_CLASS_ARM9TDMI */ { "ARM9E-S", "CPU_ARM9E" }, /* CPU_CLASS_ARM9ES */ { "ARM9EJ-S", "CPU_ARM9E" }, /* CPU_CLASS_ARM9EJS */ { "ARM10E", "CPU_ARM10" }, /* CPU_CLASS_ARM10E */ { "ARM10EJ", "CPU_ARM10" }, /* CPU_CLASS_ARM10EJ */ { "XScale", "CPU_XSCALE_..." }, /* CPU_CLASS_XSCALE */ { "Marvell", "CPU_MARVELL" }, /* CPU_CLASS_MARVELL */ }; /* * Report the type of the specified arm processor. This uses the generic and * arm specific information in the cpu structure to identify the processor. * The remaining fields in the cpu structure are filled in appropriately. */ static const char * const wtnames[] = { "write-through", "write-back", "write-back", "**unknown 3**", "**unknown 4**", "write-back-locking", /* XXX XScale-specific? */ "write-back-locking-A", "write-back-locking-B", "**unknown 8**", "**unknown 9**", "**unknown 10**", "**unknown 11**", "**unknown 12**", "**unknown 13**", "write-back-locking-C", "**unknown 15**", }; static void print_enadis(int enadis, char *s) { printf(" %s %sabled", s, (enadis == 0) ? "dis" : "en"); } enum cpu_class cpu_class = CPU_CLASS_NONE; u_int cpu_pfr(int num) { u_int feat; switch (num) { case 0: __asm __volatile("mrc p15, 0, %0, c0, c1, 0" : "=r" (feat)); break; case 1: __asm __volatile("mrc p15, 0, %0, c0, c1, 1" : "=r" (feat)); break; default: panic("Processor Feature Register %d not implemented", num); break; } return (feat); } void identify_arm_cpu(void) { u_int cpuid; u_int8_t ctrl; int i; ctrl = cpu_get_control(); cpuid = cpu_ident(); if (cpuid == 0) { printf("Processor failed probe - no CPU ID\n"); return; } for (i = 0; cpuids[i].cpuid != 0; i++) if (cpuids[i].cpuid == (cpuid & CPU_ID_CPU_MASK)) { cpu_class = cpuids[i].cpu_class; printf("CPU: %s %s (%s core)\n", cpuids[i].cpu_name, cpuids[i].cpu_steppings[cpuid & CPU_ID_REVISION_MASK], cpu_classes[cpu_class].class_name); break; } if (cpuids[i].cpuid == 0) printf("unknown CPU (ID = 0x%x)\n", cpuid); printf(" "); if (ctrl & CPU_CONTROL_BEND_ENABLE) printf(" Big-endian"); else printf(" Little-endian"); switch (cpu_class) { case CPU_CLASS_ARM9TDMI: case CPU_CLASS_ARM9ES: case CPU_CLASS_ARM9EJS: case CPU_CLASS_ARM10E: case CPU_CLASS_ARM10EJ: case CPU_CLASS_XSCALE: case CPU_CLASS_MARVELL: print_enadis(ctrl & CPU_CONTROL_DC_ENABLE, "DC"); print_enadis(ctrl & CPU_CONTROL_IC_ENABLE, "IC"); #ifdef CPU_XSCALE_81342 print_enadis(ctrl & CPU_CONTROL_L2_ENABLE, "L2"); #endif #if defined(SOC_MV_KIRKWOOD) || defined(SOC_MV_DISCOVERY) i = sheeva_control_ext(0, 0); print_enadis(i & MV_WA_ENABLE, "WA"); print_enadis(i & MV_DC_STREAM_ENABLE, "DC streaming"); printf("\n "); print_enadis((i & MV_BTB_DISABLE) == 0, "BTB"); print_enadis(i & MV_L2_ENABLE, "L2"); print_enadis((i & MV_L2_PREFETCH_DISABLE) == 0, "L2 prefetch"); printf("\n "); #endif break; default: break; } print_enadis(ctrl & CPU_CONTROL_WBUF_ENABLE, "WB"); if (ctrl & CPU_CONTROL_LABT_ENABLE) printf(" LABT"); else printf(" EABT"); print_enadis(ctrl & CPU_CONTROL_BPRD_ENABLE, "branch prediction"); printf("\n"); /* Print cache info. */ if (arm_picache_line_size == 0 && arm_pdcache_line_size == 0) return; if (arm_pcache_unified) { printf(" %dKB/%dB %d-way %s unified cache\n", arm_pdcache_size / 1024, arm_pdcache_line_size, arm_pdcache_ways, wtnames[arm_pcache_type]); } else { printf(" %dKB/%dB %d-way instruction cache\n", arm_picache_size / 1024, arm_picache_line_size, arm_picache_ways); printf(" %dKB/%dB %d-way %s data cache\n", arm_pdcache_size / 1024, arm_pdcache_line_size, arm_pdcache_ways, wtnames[arm_pcache_type]); } } Index: head/sys/arm/arm/locore-v4.S =================================================================== --- head/sys/arm/arm/locore-v4.S (revision 312291) +++ head/sys/arm/arm/locore-v4.S (revision 312292) @@ -1,493 +1,492 @@ /* $NetBSD: locore.S,v 1.14 2003/04/20 16:21:40 thorpej Exp $ */ /*- * Copyright 2011 Semihalf * Copyright (C) 1994-1997 Mark Brinicombe * Copyright (C) 1994 Brini * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Brini. * 4. The name of Brini may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY BRINI ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL BRINI BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #include "assym.s" #include #include #include -#include #include __FBSDID("$FreeBSD$"); /* 2K initial stack is plenty, it is only used by initarm() */ #define INIT_ARM_STACK_SIZE 2048 #define CPWAIT_BRANCH \ sub pc, pc, #4 #define CPWAIT(tmp) \ mrc p15, 0, tmp, c2, c0, 0 /* arbitrary read of CP15 */ ;\ mov tmp, tmp /* wait for it to complete */ ;\ CPWAIT_BRANCH /* branch to next insn */ /* * This is for libkvm, and should be the address of the beginning * of the kernel text segment (not necessarily the same as kernbase). * * These are being phased out. Newer copies of libkvm don't need these * values as the information is added to the core file by inspecting * the running kernel. */ .text .align 2 #ifdef PHYSADDR .globl kernbase .set kernbase,KERNBASE .globl physaddr .set physaddr,PHYSADDR #endif /* * On entry for FreeBSD boot ABI: * r0 - metadata pointer or 0 (boothowto on AT91's boot2) * r1 - if (r0 == 0) then metadata pointer * On entry for Linux boot ABI: * r0 - 0 * r1 - machine type (passed as arg2 to initarm) * r2 - Pointer to a tagged list or dtb image (phys addr) (passed as arg1 initarm) * * For both types of boot we gather up the args, put them in a struct arm_boot_params * structure and pass that to initarm. */ .globl btext btext: ASENTRY_NP(_start) STOP_UNWINDING /* Can't unwind into the bootloader! */ mov r9, r0 /* 0 or boot mode from boot2 */ mov r8, r1 /* Save Machine type */ mov ip, r2 /* Save meta data */ mov fp, r3 /* Future expansion */ /* Make sure interrupts are disabled. */ mrs r7, cpsr orr r7, r7, #(PSR_I | PSR_F) msr cpsr_c, r7 #if defined (FLASHADDR) && defined(LOADERRAMADDR) /* * Sanity check the configuration. * FLASHADDR and LOADERRAMADDR depend on PHYSADDR in some cases. * ARMv4 and ARMv5 make assumptions on where they are loaded. * TODO: Fix the ARMv4/v5 case. */ #ifndef PHYSADDR #error PHYSADDR must be defined for this configuration #endif /* Check if we're running from flash. */ ldr r7, =FLASHADDR /* * If we're running with MMU disabled, test against the * physical address instead. */ mrc CP15_SCTLR(r2) ands r2, r2, #CPU_CONTROL_MMU_ENABLE ldreq r6, =PHYSADDR ldrne r6, =LOADERRAMADDR cmp r7, r6 bls flash_lower cmp r7, pc bhi from_ram b do_copy flash_lower: cmp r6, pc bls from_ram do_copy: ldr r7, =KERNBASE adr r1, _start ldr r0, Lreal_start ldr r2, Lend sub r2, r2, r0 sub r0, r0, r7 add r0, r0, r6 mov r4, r0 bl memcpy ldr r0, Lram_offset add pc, r4, r0 Lram_offset: .word from_ram-_C_LABEL(_start) from_ram: nop #endif disable_mmu: /* Disable MMU for a while */ mrc CP15_SCTLR(r2) bic r2, r2, #(CPU_CONTROL_MMU_ENABLE | CPU_CONTROL_DC_ENABLE |\ CPU_CONTROL_WBUF_ENABLE) bic r2, r2, #(CPU_CONTROL_IC_ENABLE) bic r2, r2, #(CPU_CONTROL_BPRD_ENABLE) mcr CP15_SCTLR(r2) nop nop nop CPWAIT(r0) Lunmapped: /* * Build page table from scratch. */ /* * Figure out the physical address we're loaded at by assuming this * entry point code is in the first L1 section and so if we clear the * offset bits of the pc that will give us the section-aligned load * address, which remains in r5 throughout all the following code. */ ldr r2, =(L1_S_OFFSET) bic r5, pc, r2 /* Find the delta between VA and PA, result stays in r0 throughout. */ adr r0, Lpagetable bl translate_va_to_pa /* * First map the entire 4GB address space as VA=PA. It's mapped as * normal (cached) memory because it's for things like accessing the * parameters passed in from the bootloader, which might be at any * physical address, different for every platform. */ mov r1, #0 mov r2, #0 mov r3, #4096 bl build_pagetables /* * Next we do 64MiB starting at the physical load address, mapped to * the VA the kernel is linked for. */ mov r1, r5 ldr r2, =(KERNVIRTADDR) mov r3, #64 bl build_pagetables #if defined(PHYSADDR) && (KERNVIRTADDR != KERNBASE) /* * If the kernel wasn't loaded at the beginning of the ram, map the memory * before the kernel too, as some ports use that for pagetables, stack, etc... */ ldr r1, =PHYSADDR ldr r2, =KERNBASE ldr r3, =((KERNVIRTADDR - KERNBASE) / L1_S_SIZE) bl build_pagetables #endif /* Create a device mapping for early_printf if specified. */ #if defined(SOCDEV_PA) && defined(SOCDEV_VA) ldr r1, =SOCDEV_PA ldr r2, =SOCDEV_VA mov r3, #1 bl build_device_pagetables #endif mcr p15, 0, r0, c2, c0, 0 /* Set TTB */ mcr p15, 0, r0, c8, c7, 0 /* Flush TLB */ /* Set the Domain Access register. Very important! */ mov r0, #((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2)) | DOMAIN_CLIENT) mcr p15, 0, r0, c3, c0, 0 /* * Enable MMU. */ mrc CP15_SCTLR(r0) orr r0, r0, #(CPU_CONTROL_MMU_ENABLE) mcr CP15_SCTLR(r0) nop nop nop CPWAIT(r0) /* Transition the PC from physical to virtual addressing. */ ldr pc,=mmu_done mmu_done: nop adr r1, .Lstart ldmia r1, {r1, r2, sp} /* Set initial stack and */ sub r2, r2, r1 /* get zero init data */ mov r3, #0 .L1: str r3, [r1], #0x0004 /* get zero init data */ subs r2, r2, #4 bgt .L1 virt_done: mov r1, #28 /* loader info size is 28 bytes also second arg */ subs sp, sp, r1 /* allocate arm_boot_params struct on stack */ mov r0, sp /* loader info pointer is first arg */ bic sp, sp, #7 /* align stack to 8 bytes */ str r1, [r0] /* Store length of loader info */ str r9, [r0, #4] /* Store r0 from boot loader */ str r8, [r0, #8] /* Store r1 from boot loader */ str ip, [r0, #12] /* store r2 from boot loader */ str fp, [r0, #16] /* store r3 from boot loader */ str r5, [r0, #20] /* store the physical address */ adr r4, Lpagetable /* load the pagetable address */ ldr r5, [r4, #4] str r5, [r0, #24] /* store the pagetable address */ mov fp, #0 /* trace back starts here */ bl _C_LABEL(initarm) /* Off we go */ /* init arm will return the new stack pointer. */ mov sp, r0 bl _C_LABEL(mi_startup) /* call mi_startup()! */ adr r0, .Lmainreturned b _C_LABEL(panic) /* NOTREACHED */ END(_start) #define VA_TO_PA_POINTER(name, table) \ name: ;\ .word . ;\ .word table /* * Returns the physical address of a magic va to pa pointer. * r0 - The pagetable data pointer. This must be built using the * VA_TO_PA_POINTER macro. * e.g. * VA_TO_PA_POINTER(Lpagetable, pagetable) * ... * adr r0, Lpagetable * bl translate_va_to_pa * r0 will now contain the physical address of pagetable * r1, r2 - Trashed */ translate_va_to_pa: ldr r1, [r0] sub r2, r1, r0 /* At this point: r2 = VA - PA */ /* * Find the physical address of the table. After these two * instructions: * r1 = va(pagetable) * * r0 = va(pagetable) - (VA - PA) * = va(pagetable) - VA + PA * = pa(pagetable) */ ldr r1, [r0, #4] sub r0, r1, r2 RET /* * Builds the page table * r0 - The table base address * r1 - The physical address (trashed) * r2 - The virtual address (trashed) * r3 - The number of 1MiB sections * r4 - Trashed * * Addresses must be 1MiB aligned */ build_device_pagetables: ldr r4, =(L1_TYPE_S|L1_S_AP(AP_KRW)) b 1f build_pagetables: /* Set the required page attributed */ ldr r4, =(L1_TYPE_S|L1_S_C|L1_S_AP(AP_KRW)) 1: orr r1, r4 /* Move the virtual address to the correct bit location */ lsr r2, #(L1_S_SHIFT - 2) mov r4, r3 2: str r1, [r0, r2] add r2, r2, #4 add r1, r1, #(L1_S_SIZE) adds r4, r4, #-1 bhi 2b RET VA_TO_PA_POINTER(Lpagetable, pagetable) Lreal_start: .word _start Lend: .word _edata .Lstart: .word _edata .word _ebss .word svcstk + INIT_ARM_STACK_SIZE .Lvirt_done: .word virt_done .Lmainreturned: .asciz "main() returned" .align 2 .bss svcstk: .space INIT_ARM_STACK_SIZE /* * Memory for the initial pagetable. We are unable to place this in * the bss as this will be cleared after the table is loaded. */ .section ".init_pagetable" .align 14 /* 16KiB aligned */ pagetable: .space L1_TABLE_SIZE .text .align 2 .Lcpufuncs: .word _C_LABEL(cpufuncs) ENTRY_NP(cpu_halt) mrs r2, cpsr bic r2, r2, #(PSR_MODE) orr r2, r2, #(PSR_SVC32_MODE) orr r2, r2, #(PSR_I | PSR_F) msr cpsr_fsxc, r2 ldr r4, .Lcpu_reset_address ldr r4, [r4] ldr r0, .Lcpufuncs mov lr, pc ldr pc, [r0, #CF_IDCACHE_WBINV_ALL] mov lr, pc ldr pc, [r0, #CF_L2CACHE_WBINV_ALL] /* * Load the cpu_reset_needs_v4_MMU_disable flag to determine if it's * necessary. */ ldr r1, .Lcpu_reset_needs_v4_MMU_disable ldr r1, [r1] cmp r1, #0 mov r2, #0 /* * MMU & IDC off, 32 bit program & data space * Hurl ourselves into the ROM */ mov r0, #(CPU_CONTROL_32BP_ENABLE | CPU_CONTROL_32BD_ENABLE) mcr CP15_SCTLR(r0) mcrne p15, 0, r2, c8, c7, 0 /* nail I+D TLB on ARMv4 and greater */ mov pc, r4 /* * _cpu_reset_address contains the address to branch to, to complete * the cpu reset after turning the MMU off * This variable is provided by the hardware specific code */ .Lcpu_reset_address: .word _C_LABEL(cpu_reset_address) /* * cpu_reset_needs_v4_MMU_disable contains a flag that signals if the * v4 MMU disable instruction needs executing... it is an illegal instruction * on f.e. ARM6/7 that locks up the computer in an endless illegal * instruction / data-abort / reset loop. */ .Lcpu_reset_needs_v4_MMU_disable: .word _C_LABEL(cpu_reset_needs_v4_MMU_disable) END(cpu_halt) /* * setjump + longjmp */ ENTRY(setjmp) stmia r0, {r4-r14} mov r0, #0x00000000 RET END(setjmp) ENTRY(longjmp) ldmia r0, {r4-r14} mov r0, #0x00000001 RET END(longjmp) .data .global _C_LABEL(esym) _C_LABEL(esym): .word _C_LABEL(end) ENTRY_NP(abort) b _C_LABEL(abort) END(abort) ENTRY_NP(sigcode) mov r0, sp add r0, r0, #SIGF_UC /* * Call the sigreturn system call. * * We have to load r7 manually rather than using * "ldr r7, =SYS_sigreturn" to ensure the value of szsigcode is * correct. Using the alternative places esigcode at the address * of the data rather than the address one past the data. */ ldr r7, [pc, #12] /* Load SYS_sigreturn */ swi SYS_sigreturn /* Well if that failed we better exit quick ! */ ldr r7, [pc, #8] /* Load SYS_exit */ swi SYS_exit /* Branch back to retry SYS_sigreturn */ b . - 16 END(sigcode) .word SYS_sigreturn .word SYS_exit .align 2 .global _C_LABEL(esigcode) _C_LABEL(esigcode): .data .global szsigcode szsigcode: .long esigcode-sigcode /* End of locore.S */ Index: head/sys/arm/arm/locore-v6.S =================================================================== --- head/sys/arm/arm/locore-v6.S (revision 312291) +++ head/sys/arm/arm/locore-v6.S (revision 312292) @@ -1,583 +1,582 @@ /*- * Copyright 2004-2014 Olivier Houchard * Copyright 2012-2014 Ian Lepore * Copyright 2013-2014 Andrew Turner * Copyright 2014 Svatopluk Kraus * Copyright 2014 Michal Meloun * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include "assym.s" #include #include #include #include #include -#include #include __FBSDID("$FreeBSD$"); #if __ARM_ARCH >= 7 #if defined(__ARM_ARCH_7VE__) || defined(__clang__) /* * HYP support is in bintuils >= 2.21 and gcc >= 4.9 defines __ARM_ARCH_7VE__ * when enabled. llvm >= 3.6 supports it too. */ .arch_extension virt #define MSR_ELR_HYP(regnum) msr elr_hyp, lr #define ERET eret #else #define MSR_ELR_HYP(regnum) .word (0xe12ef300 | regnum) #define ERET .word 0xe160006e #endif #endif /* __ARM_ARCH >= 7 */ /* A small statically-allocated stack used only during initarm() and AP startup. */ #define INIT_ARM_STACK_SIZE 2048 .text .align 2 #if __ARM_ARCH >= 7 #define LEAVE_HYP \ /* Leave HYP mode */ ;\ mrs r0, cpsr ;\ and r0, r0, #(PSR_MODE) /* Mode is in the low 5 bits of CPSR */ ;\ teq r0, #(PSR_HYP32_MODE) /* Hyp Mode? */ ;\ bne 1f ;\ /* Ensure that IRQ, FIQ and Aborts will be disabled after eret */ ;\ mrs r0, cpsr ;\ bic r0, r0, #(PSR_MODE) ;\ orr r0, r0, #(PSR_SVC32_MODE) ;\ orr r0, r0, #(PSR_I | PSR_F | PSR_A) ;\ msr spsr_cxsf, r0 ;\ /* Exit hypervisor mode */ ;\ adr lr, 1f ;\ MSR_ELR_HYP(14) ;\ ERET ;\ 1: #else #define LEAVE_HYP #endif /* __ARM_ARCH >= 7 */ /* * On entry for FreeBSD boot ABI: * r0 - metadata pointer or 0 (boothowto on AT91's boot2) * r1 - if (r0 == 0) then metadata pointer * On entry for Linux boot ABI: * r0 - 0 * r1 - machine type (passed as arg2 to initarm) * r2 - Pointer to a tagged list or dtb image (phys addr) (passed as arg1 initarm) * * For both types of boot we gather up the args, put them in a struct arm_boot_params * structure and pass that to initarm. */ .globl btext btext: ASENTRY_NP(_start) STOP_UNWINDING /* Can't unwind into the bootloader! */ /* Make sure interrupts are disabled. */ cpsid ifa mov r8, r0 /* 0 or boot mode from boot2 */ mov r9, r1 /* Save Machine type */ mov r10, r2 /* Save meta data */ mov r11, r3 /* Future expansion */ LEAVE_HYP /* * Check whether data cache is enabled. If it is, then we know * current tags are valid (not power-on garbage values) and there * might be dirty lines that need cleaning. Disable cache to prevent * new lines being allocated, then call wbinv_poc_all to clean it. */ mrc CP15_SCTLR(r7) tst r7, #CPU_CONTROL_DC_ENABLE blne dcache_wbinv_poc_all /* ! Do not write to memory between wbinv and disabling cache ! */ /* * Now there are no dirty lines, but there may still be lines marked * valid. Disable all caches and the MMU, and invalidate everything * before setting up new page tables and re-enabling the mmu. */ 1: bic r7, #CPU_CONTROL_DC_ENABLE bic r7, #CPU_CONTROL_AFLT_ENABLE bic r7, #CPU_CONTROL_MMU_ENABLE bic r7, #CPU_CONTROL_IC_ENABLE bic r7, #CPU_CONTROL_BPRD_ENABLE bic r7, #CPU_CONTROL_SW_ENABLE orr r7, #CPU_CONTROL_UNAL_ENABLE orr r7, #CPU_CONTROL_VECRELOC mcr CP15_SCTLR(r7) DSB ISB bl dcache_inv_poc_all mcr CP15_ICIALLU DSB ISB /* * Build page table from scratch. */ /* * Figure out the physical address we're loaded at by assuming this * entry point code is in the first L1 section and so if we clear the * offset bits of the pc that will give us the section-aligned load * address, which remains in r5 throughout all the following code. */ ldr r2, =(L1_S_OFFSET) bic r5, pc, r2 /* Find the delta between VA and PA, result stays in r0 throughout. */ adr r0, Lpagetable bl translate_va_to_pa /* * First map the entire 4GB address space as VA=PA. It's mapped as * normal (cached) memory because it's for things like accessing the * parameters passed in from the bootloader, which might be at any * physical address, different for every platform. */ mov r1, #0 mov r2, #0 mov r3, #4096 bl build_pagetables /* * Next we do 64MiB starting at the physical load address, mapped to * the VA the kernel is linked for. */ mov r1, r5 ldr r2, =(KERNVIRTADDR) mov r3, #64 bl build_pagetables /* Create a device mapping for early_printf if specified. */ #if defined(SOCDEV_PA) && defined(SOCDEV_VA) ldr r1, =SOCDEV_PA ldr r2, =SOCDEV_VA mov r3, #1 bl build_device_pagetables #endif bl init_mmu /* Transition the PC from physical to virtual addressing. */ ldr pc, =1f 1: /* Setup stack, clear BSS */ ldr r1, =.Lstart ldmia r1, {r1, r2, sp} /* Set initial stack and */ add sp, sp, #INIT_ARM_STACK_SIZE sub r2, r2, r1 /* get zero init data */ mov r3, #0 2: str r3, [r1], #0x0004 /* get zero init data */ subs r2, r2, #4 bgt 2b mov r1, #28 /* loader info size is 28 bytes also second arg */ subs sp, sp, r1 /* allocate arm_boot_params struct on stack */ mov r0, sp /* loader info pointer is first arg */ bic sp, sp, #7 /* align stack to 8 bytes */ str r1, [r0] /* Store length of loader info */ str r8, [r0, #4] /* Store r0 from boot loader */ str r9, [r0, #8] /* Store r1 from boot loader */ str r10, [r0, #12] /* store r2 from boot loader */ str r11, [r0, #16] /* store r3 from boot loader */ str r5, [r0, #20] /* store the physical address */ adr r4, Lpagetable /* load the pagetable address */ ldr r5, [r4, #4] str r5, [r0, #24] /* store the pagetable address */ mov fp, #0 /* trace back starts here */ bl _C_LABEL(initarm) /* Off we go */ /* init arm will return the new stack pointer. */ mov sp, r0 bl _C_LABEL(mi_startup) /* call mi_startup()! */ ldr r0, =.Lmainreturned b _C_LABEL(panic) /* NOTREACHED */ END(_start) #define VA_TO_PA_POINTER(name, table) \ name: ;\ .word . ;\ .word table /* * Returns the physical address of a magic va to pa pointer. * r0 - The pagetable data pointer. This must be built using the * VA_TO_PA_POINTER macro. * e.g. * VA_TO_PA_POINTER(Lpagetable, pagetable) * ... * adr r0, Lpagetable * bl translate_va_to_pa * r0 will now contain the physical address of pagetable * r1, r2 - Trashed */ translate_va_to_pa: ldr r1, [r0] sub r2, r1, r0 /* At this point: r2 = VA - PA */ /* * Find the physical address of the table. After these two * instructions: * r1 = va(pagetable) * * r0 = va(pagetable) - (VA - PA) * = va(pagetable) - VA + PA * = pa(pagetable) */ ldr r1, [r0, #4] sub r0, r1, r2 mov pc, lr /* * Init MMU * r0 - the table base address */ ASENTRY_NP(init_mmu) /* Setup TLB and MMU registers */ mcr CP15_TTBR0(r0) /* Set TTB */ mov r0, #0 mcr CP15_CONTEXTIDR(r0) /* Set ASID to 0 */ /* Set the Domain Access register */ mov r0, #DOMAIN_CLIENT /* Only domain #0 is used */ mcr CP15_DACR(r0) /* * Set TEX remap registers * - All is set to uncacheable memory */ ldr r0, =0xAAAAA mcr CP15_PRRR(r0) mov r0, #0 mcr CP15_NMRR(r0) mcr CP15_TLBIALL /* Flush TLB */ DSB ISB /* Enable MMU */ mrc CP15_SCTLR(r0) orr r0, r0, #CPU_CONTROL_MMU_ENABLE orr r0, r0, #CPU_CONTROL_V6_EXTPAGE orr r0, r0, #CPU_CONTROL_TR_ENABLE orr r0, r0, #CPU_CONTROL_AF_ENABLE mcr CP15_SCTLR(r0) DSB ISB mcr CP15_TLBIALL /* Flush TLB */ mcr CP15_BPIALL /* Flush Branch predictor */ DSB ISB mov pc, lr END(init_mmu) /* * Init SMP coherent mode, enable caching and switch to final MMU table. * Called with disabled caches * r0 - The table base address * r1 - clear bits for aux register * r2 - set bits for aux register */ ASENTRY_NP(reinit_mmu) push {r4-r11, lr} mov r4, r0 mov r5, r1 mov r6, r2 /* !! Be very paranoid here !! */ /* !! We cannot write single bit here !! */ #if 0 /* XXX writeback shouldn't be necessary */ /* Write back and invalidate all integrated caches */ bl dcache_wbinv_poc_all #else bl dcache_inv_pou_all #endif mcr CP15_ICIALLU DSB ISB /* Set auxiliary register */ mrc CP15_ACTLR(r7) bic r8, r7, r5 /* Mask bits */ eor r8, r8, r6 /* Set bits */ teq r7, r8 mcrne CP15_ACTLR(r8) DSB ISB /* Enable caches. */ mrc CP15_SCTLR(r7) orr r7, #CPU_CONTROL_DC_ENABLE orr r7, #CPU_CONTROL_IC_ENABLE orr r7, #CPU_CONTROL_BPRD_ENABLE mcr CP15_SCTLR(r7) DSB mcr CP15_TTBR0(r4) /* Set new TTB */ DSB ISB mcr CP15_TLBIALL /* Flush TLB */ mcr CP15_BPIALL /* Flush Branch predictor */ DSB ISB #if 0 /* XXX writeback shouldn't be necessary */ /* Write back and invalidate all integrated caches */ bl dcache_wbinv_poc_all #else bl dcache_inv_pou_all #endif mcr CP15_ICIALLU DSB ISB pop {r4-r11, pc} END(reinit_mmu) /* * Builds the page table * r0 - The table base address * r1 - The physical address (trashed) * r2 - The virtual address (trashed) * r3 - The number of 1MiB sections * r4 - Trashed * * Addresses must be 1MiB aligned */ build_device_pagetables: ldr r4, =PTE1_V|PTE1_A|PTE1_AP_KRW|TEX1_CLASS_0 b 1f build_pagetables: /* Set the required page attributed */ ldr r4, =PTE1_V|PTE1_A|PTE1_AP_KRW|TEX1_CLASS_0 1: orr r1, r4 /* Move the virtual address to the correct bit location */ lsr r2, #(PTE1_SHIFT - 2) mov r4, r3 2: str r1, [r0, r2] add r2, r2, #4 add r1, r1, #(PTE1_SIZE) adds r4, r4, #-1 bhi 2b mov pc, lr VA_TO_PA_POINTER(Lpagetable, boot_pt1) .Lstart: .word _edata /* Note that these three items are */ .word _ebss /* loaded with a single ldmia and */ .word svcstk /* must remain in order together. */ .Lmainreturned: .asciz "main() returned" .align 2 .bss svcstk: .space INIT_ARM_STACK_SIZE * MAXCPU /* * Memory for the initial pagetable. We are unable to place this in * the bss as this will be cleared after the table is loaded. */ .section ".init_pagetable" .align 14 /* 16KiB aligned */ .globl boot_pt1 boot_pt1: .space L1_TABLE_SIZE .text .align 2 #if defined(SMP) ASENTRY_NP(mpentry) /* Make sure interrupts are disabled. */ cpsid ifa LEAVE_HYP /* Setup core, disable all caches. */ mrc CP15_SCTLR(r0) bic r0, #CPU_CONTROL_MMU_ENABLE bic r0, #CPU_CONTROL_AFLT_ENABLE bic r0, #CPU_CONTROL_DC_ENABLE bic r0, #CPU_CONTROL_IC_ENABLE bic r0, #CPU_CONTROL_BPRD_ENABLE bic r0, #CPU_CONTROL_SW_ENABLE orr r0, #CPU_CONTROL_UNAL_ENABLE orr r0, #CPU_CONTROL_VECRELOC mcr CP15_SCTLR(r0) DSB ISB /* Invalidate L1 cache I+D cache */ bl dcache_inv_pou_all mcr CP15_ICIALLU DSB ISB /* Find the delta between VA and PA */ adr r0, Lpagetable bl translate_va_to_pa bl init_mmu adr r1, .Lstart+8 /* Get initstack pointer from */ ldr sp, [r1] /* startup data. */ mrc CP15_MPIDR(r0) /* Get processor id number. */ and r0, r0, #0x0f mov r1, #INIT_ARM_STACK_SIZE mul r2, r1, r0 /* Point sp to initstack */ add sp, sp, r2 /* area for this processor. */ /* Switch to virtual addresses. */ ldr pc, =1f 1: mov fp, #0 /* trace back starts here */ bl _C_LABEL(init_secondary)/* Off we go, cpu id in r0. */ adr r0, .Lmpreturned b _C_LABEL(panic) /* NOTREACHED */ END(mpentry) .Lmpreturned: .asciz "init_secondary() returned" .align 2 #endif ENTRY_NP(cpu_halt) /* XXX re-implement !!! */ cpsid ifa bl dcache_wbinv_poc_all ldr r4, .Lcpu_reset_address ldr r4, [r4] teq r4, #0 movne pc, r4 1: WFI b 1b /* * _cpu_reset_address contains the address to branch to, to complete * the cpu reset after turning the MMU off * This variable is provided by the hardware specific code */ .Lcpu_reset_address: .word _C_LABEL(cpu_reset_address) END(cpu_halt) /* * setjump + longjmp */ ENTRY(setjmp) stmia r0, {r4-r14} mov r0, #0x00000000 RET END(setjmp) ENTRY(longjmp) ldmia r0, {r4-r14} mov r0, #0x00000001 RET END(longjmp) .data .global _C_LABEL(esym) _C_LABEL(esym): .word _C_LABEL(end) ENTRY_NP(abort) b _C_LABEL(abort) END(abort) ENTRY_NP(sigcode) mov r0, sp add r0, r0, #SIGF_UC /* * Call the sigreturn system call. * * We have to load r7 manually rather than using * "ldr r7, =SYS_sigreturn" to ensure the value of szsigcode is * correct. Using the alternative places esigcode at the address * of the data rather than the address one past the data. */ ldr r7, [pc, #12] /* Load SYS_sigreturn */ swi SYS_sigreturn /* Well if that failed we better exit quick ! */ ldr r7, [pc, #8] /* Load SYS_exit */ swi SYS_exit /* Branch back to retry SYS_sigreturn */ b . - 16 END(sigcode) .word SYS_sigreturn .word SYS_exit .align 2 .global _C_LABEL(esigcode) _C_LABEL(esigcode): .data .global szsigcode szsigcode: .long esigcode-sigcode /* End of locore.S */ Index: head/sys/arm/include/cpuconf.h =================================================================== --- head/sys/arm/include/cpuconf.h (revision 312291) +++ head/sys/arm/include/cpuconf.h (nonexistent) @@ -1,195 +0,0 @@ -/* $NetBSD: cpuconf.h,v 1.8 2003/09/06 08:55:42 rearnsha Exp $ */ - -/*- - * Copyright (c) 2002 Wasabi Systems, Inc. - * All rights reserved. - * - * Written by Jason R. Thorpe for Wasabi Systems, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed for the NetBSD Project by - * Wasabi Systems, Inc. - * 4. The name of Wasabi Systems, Inc. may not be used to endorse - * or promote products derived from this software without specific prior - * written permission. - * - * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED - * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC - * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - * $FreeBSD$ - * - */ - -#ifndef _MACHINE_CPUCONF_H_ -#define _MACHINE_CPUCONF_H_ - -/* - * IF YOU CHANGE THIS FILE, MAKE SURE TO UPDATE THE DEFINITION OF - * "PMAP_NEEDS_PTE_SYNC" IN FOR THE CPU TYPE - * YOU ARE ADDING SUPPORT FOR. - */ - -/* - * Step 1: Count the number of CPU types configured into the kernel. - */ -#define CPU_NTYPES (defined(CPU_ARM9) + \ - defined(CPU_ARM9E) + \ - defined(CPU_ARM1176) + \ - defined(CPU_XSCALE_PXA2X0) + \ - defined(CPU_FA526) + \ - defined(CPU_XSCALE_IXP425)) + \ - defined(CPU_CORTEXA8) + \ - defined(CPU_CORTEXA_MP) + \ - defined(CPU_KRAIT) + \ - defined(CPU_MV_PJ4B) - -/* - * Step 2: Determine which ARM architecture versions are configured. - */ -#if defined(CPU_ARM9) || defined(CPU_FA526) -#define ARM_ARCH_4 1 -#else -#define ARM_ARCH_4 0 -#endif - -#if (defined(CPU_ARM9E) || \ - defined(CPU_XSCALE_81342) || \ - defined(CPU_XSCALE_PXA2X0) || defined(CPU_XSCALE_IXP425)) -#define ARM_ARCH_5 1 -#else -#define ARM_ARCH_5 0 -#endif - -#if !defined(ARM_ARCH_6) -#if defined(CPU_ARM1176) -#define ARM_ARCH_6 1 -#else -#define ARM_ARCH_6 0 -#endif -#endif - -#if defined(CPU_CORTEXA8) || defined(CPU_CORTEXA_MP) || \ - defined(CPU_KRAIT) || defined(CPU_MV_PJ4B) -#define ARM_ARCH_7A 1 -#else -#define ARM_ARCH_7A 0 -#endif - -#define ARM_NARCH (ARM_ARCH_4 + ARM_ARCH_5 + ARM_ARCH_6 | ARM_ARCH_7A) - -/* - * Compatibility for userland builds that have no CPUTYPE defined. Use the ARCH - * constants predefined by the compiler to define our old-school arch constants. - * This is a stopgap measure to tide us over until the conversion of all code - * to the newer ACLE constants defined by ARM (see acle-compat.h). - */ -#if ARM_NARCH == 0 -#if defined(__ARM_ARCH_4T__) -#undef ARM_ARCH_4 -#undef ARM_NARCH -#define ARM_ARCH_4 1 -#define ARM_NARCH 1 -#define CPU_ARM9 1 -#elif defined(__ARM_ARCH_6ZK__) -#undef ARM_ARCH_6 -#undef ARM_NARCH -#define ARM_ARCH_6 1 -#define ARM_NARCH 1 -#define CPU_ARM1176 1 -#endif -#endif - -#if ARM_NARCH == 0 && !defined(KLD_MODULE) && defined(_KERNEL) -#error ARM_NARCH is 0 -#endif - -#if ARM_ARCH_5 || ARM_ARCH_6 || ARM_ARCH_7A -/* - * We could support Thumb code on v4T, but the lack of clean interworking - * makes that hard. - */ -#define THUMB_CODE -#endif - -/* - * Step 3: Define which MMU classes are configured: - * - * ARM_MMU_MEMC Prehistoric, external memory controller - * and MMU for ARMv2 CPUs. - * - * ARM_MMU_GENERIC Generic ARM MMU, compatible with ARMv4 and v5. - * - * ARM_MMU_V6 ARMv6 MMU. - * - * ARM_MMU_V7 ARMv7 MMU. - * - * ARM_MMU_XSCALE XScale MMU. Compatible with generic ARM - * MMU, but also has several extensions which - * require different PTE layout to use. - */ -#if (defined(CPU_ARM9) || defined(CPU_ARM9E) || defined(CPU_FA526)) -#define ARM_MMU_GENERIC 1 -#else -#define ARM_MMU_GENERIC 0 -#endif - -#if defined(CPU_ARM1176) -#define ARM_MMU_V6 1 -#else -#define ARM_MMU_V6 0 -#endif - -#if defined(CPU_CORTEXA8) || defined(CPU_CORTEXA_MP) || \ - defined(CPU_KRAIT) || defined(CPU_MV_PJ4B) -#define ARM_MMU_V7 1 -#else -#define ARM_MMU_V7 0 -#endif - -#if (defined(CPU_XSCALE_PXA2X0) || defined(CPU_XSCALE_IXP425) || \ - defined(CPU_XSCALE_81342)) -#define ARM_MMU_XSCALE 1 -#else -#define ARM_MMU_XSCALE 0 -#endif - -#define ARM_NMMUS (ARM_MMU_GENERIC + ARM_MMU_V6 + \ - ARM_MMU_V7 + ARM_MMU_XSCALE) -#if ARM_NMMUS == 0 && !defined(KLD_MODULE) && defined(_KERNEL) -#error ARM_NMMUS is 0 -#endif - -/* - * Step 4: Define features that may be present on a subset of CPUs - * - * ARM_XSCALE_PMU Performance Monitoring Unit on 81342 - */ - -#if (defined(CPU_XSCALE_81342)) -#define ARM_XSCALE_PMU 1 -#else -#define ARM_XSCALE_PMU 0 -#endif - -#if defined(CPU_XSCALE_81342) -#define CPU_XSCALE_CORE3 -#endif -#endif /* _MACHINE_CPUCONF_H_ */ Property changes on: head/sys/arm/include/cpuconf.h ___________________________________________________________________ Deleted: svn:keywords ## -1 +0,0 ## -FreeBSD=%H \ No newline at end of property Index: head/sys/arm/include/atomic.h =================================================================== --- head/sys/arm/include/atomic.h (revision 312291) +++ head/sys/arm/include/atomic.h (revision 312292) @@ -1,119 +1,117 @@ /* $NetBSD: atomic.h,v 1.1 2002/10/19 12:22:34 bsh Exp $ */ /*- * Copyright (C) 2003-2004 Olivier Houchard * Copyright (C) 1994-1997 Mark Brinicombe * Copyright (C) 1994 Brini * All rights reserved. * * This code is derived from software written for Brini by Mark Brinicombe * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Brini. * 4. The name of Brini may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY BRINI ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL BRINI BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _MACHINE_ATOMIC_H_ #define _MACHINE_ATOMIC_H_ #include #include #ifndef _KERNEL #include -#else -#include #endif #if __ARM_ARCH >= 6 #include #else /* < armv6 */ #include #endif /* Arch >= v6 */ static __inline int atomic_load_32(volatile uint32_t *v) { return (*v); } static __inline void atomic_store_32(volatile uint32_t *dst, uint32_t src) { *dst = src; } static __inline int atomic_load_long(volatile u_long *v) { return (*v); } static __inline void atomic_store_long(volatile u_long *dst, u_long src) { *dst = src; } #define atomic_clear_ptr atomic_clear_32 #define atomic_clear_acq_ptr atomic_clear_acq_32 #define atomic_clear_rel_ptr atomic_clear_rel_32 #define atomic_set_ptr atomic_set_32 #define atomic_set_acq_ptr atomic_set_acq_32 #define atomic_set_rel_ptr atomic_set_rel_32 #define atomic_cmpset_ptr atomic_cmpset_32 #define atomic_cmpset_acq_ptr atomic_cmpset_acq_32 #define atomic_cmpset_rel_ptr atomic_cmpset_rel_32 #define atomic_load_acq_ptr atomic_load_acq_32 #define atomic_store_ptr atomic_store_32 #define atomic_store_rel_ptr atomic_store_rel_32 #define atomic_swap_ptr atomic_swap_32 #define atomic_readandclear_ptr atomic_readandclear_32 #define atomic_add_int atomic_add_32 #define atomic_add_acq_int atomic_add_acq_32 #define atomic_add_rel_int atomic_add_rel_32 #define atomic_subtract_int atomic_subtract_32 #define atomic_subtract_acq_int atomic_subtract_acq_32 #define atomic_subtract_rel_int atomic_subtract_rel_32 #define atomic_clear_int atomic_clear_32 #define atomic_clear_acq_int atomic_clear_acq_32 #define atomic_clear_rel_int atomic_clear_rel_32 #define atomic_set_int atomic_set_32 #define atomic_set_acq_int atomic_set_acq_32 #define atomic_set_rel_int atomic_set_rel_32 #define atomic_cmpset_int atomic_cmpset_32 #define atomic_cmpset_acq_int atomic_cmpset_acq_32 #define atomic_cmpset_rel_int atomic_cmpset_rel_32 #define atomic_fetchadd_int atomic_fetchadd_32 #define atomic_readandclear_int atomic_readandclear_32 #define atomic_load_acq_int atomic_load_acq_32 #define atomic_store_rel_int atomic_store_rel_32 #define atomic_swap_int atomic_swap_32 #endif /* _MACHINE_ATOMIC_H_ */ Index: head/sys/arm/include/cpufunc.h =================================================================== --- head/sys/arm/include/cpufunc.h (revision 312291) +++ head/sys/arm/include/cpufunc.h (revision 312292) @@ -1,501 +1,500 @@ /* $NetBSD: cpufunc.h,v 1.29 2003/09/06 09:08:35 rearnsha Exp $ */ /*- * Copyright (c) 1997 Mark Brinicombe. * Copyright (c) 1997 Causality Limited * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Causality Limited. * 4. The name of Causality Limited may not be used to endorse or promote * products derived from this software without specific prior written * permission. * * THIS SOFTWARE IS PROVIDED BY CAUSALITY LIMITED ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL CAUSALITY LIMITED BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * RiscBSD kernel project * * cpufunc.h * * Prototypes for cpu, mmu and tlb related functions. * * $FreeBSD$ */ #ifndef _MACHINE_CPUFUNC_H_ #define _MACHINE_CPUFUNC_H_ #ifdef _KERNEL #include #include -#include static __inline void breakpoint(void) { __asm(".word 0xe7ffffff"); } struct cpu_functions { /* CPU functions */ #if __ARM_ARCH < 6 void (*cf_cpwait) (void); /* MMU functions */ u_int (*cf_control) (u_int bic, u_int eor); void (*cf_setttb) (u_int ttb); /* TLB functions */ void (*cf_tlb_flushID) (void); void (*cf_tlb_flushID_SE) (u_int va); void (*cf_tlb_flushD) (void); void (*cf_tlb_flushD_SE) (u_int va); /* * Cache operations: * * We define the following primitives: * * icache_sync_range Synchronize I-cache range * * dcache_wbinv_all Write-back and Invalidate D-cache * dcache_wbinv_range Write-back and Invalidate D-cache range * dcache_inv_range Invalidate D-cache range * dcache_wb_range Write-back D-cache range * * idcache_wbinv_all Write-back and Invalidate D-cache, * Invalidate I-cache * idcache_wbinv_range Write-back and Invalidate D-cache, * Invalidate I-cache range * * Note that the ARM term for "write-back" is "clean". We use * the term "write-back" since it's a more common way to describe * the operation. * * There are some rules that must be followed: * * ID-cache Invalidate All: * Unlike other functions, this one must never write back. * It is used to intialize the MMU when it is in an unknown * state (such as when it may have lines tagged as valid * that belong to a previous set of mappings). * * I-cache Sync range: * The goal is to synchronize the instruction stream, * so you may beed to write-back dirty D-cache blocks * first. If a range is requested, and you can't * synchronize just a range, you have to hit the whole * thing. * * D-cache Write-Back and Invalidate range: * If you can't WB-Inv a range, you must WB-Inv the * entire D-cache. * * D-cache Invalidate: * If you can't Inv the D-cache, you must Write-Back * and Invalidate. Code that uses this operation * MUST NOT assume that the D-cache will not be written * back to memory. * * D-cache Write-Back: * If you can't Write-back without doing an Inv, * that's fine. Then treat this as a WB-Inv. * Skipping the invalidate is merely an optimization. * * All operations: * Valid virtual addresses must be passed to each * cache operation. */ void (*cf_icache_sync_range) (vm_offset_t, vm_size_t); void (*cf_dcache_wbinv_all) (void); void (*cf_dcache_wbinv_range) (vm_offset_t, vm_size_t); void (*cf_dcache_inv_range) (vm_offset_t, vm_size_t); void (*cf_dcache_wb_range) (vm_offset_t, vm_size_t); void (*cf_idcache_inv_all) (void); void (*cf_idcache_wbinv_all) (void); void (*cf_idcache_wbinv_range) (vm_offset_t, vm_size_t); #endif void (*cf_l2cache_wbinv_all) (void); void (*cf_l2cache_wbinv_range) (vm_offset_t, vm_size_t); void (*cf_l2cache_inv_range) (vm_offset_t, vm_size_t); void (*cf_l2cache_wb_range) (vm_offset_t, vm_size_t); void (*cf_l2cache_drain_writebuf) (void); /* Other functions */ #if __ARM_ARCH < 6 void (*cf_drain_writebuf) (void); #endif void (*cf_sleep) (int mode); #if __ARM_ARCH < 6 /* Soft functions */ void (*cf_context_switch) (void); #endif void (*cf_setup) (void); }; extern struct cpu_functions cpufuncs; extern u_int cputype; #if __ARM_ARCH < 6 #define cpu_cpwait() cpufuncs.cf_cpwait() #define cpu_control(c, e) cpufuncs.cf_control(c, e) #define cpu_setttb(t) cpufuncs.cf_setttb(t) #define cpu_tlb_flushID() cpufuncs.cf_tlb_flushID() #define cpu_tlb_flushID_SE(e) cpufuncs.cf_tlb_flushID_SE(e) #define cpu_tlb_flushD() cpufuncs.cf_tlb_flushD() #define cpu_tlb_flushD_SE(e) cpufuncs.cf_tlb_flushD_SE(e) #define cpu_icache_sync_range(a, s) cpufuncs.cf_icache_sync_range((a), (s)) #define cpu_dcache_wbinv_all() cpufuncs.cf_dcache_wbinv_all() #define cpu_dcache_wbinv_range(a, s) cpufuncs.cf_dcache_wbinv_range((a), (s)) #define cpu_dcache_inv_range(a, s) cpufuncs.cf_dcache_inv_range((a), (s)) #define cpu_dcache_wb_range(a, s) cpufuncs.cf_dcache_wb_range((a), (s)) #define cpu_idcache_inv_all() cpufuncs.cf_idcache_inv_all() #define cpu_idcache_wbinv_all() cpufuncs.cf_idcache_wbinv_all() #define cpu_idcache_wbinv_range(a, s) cpufuncs.cf_idcache_wbinv_range((a), (s)) #endif #define cpu_l2cache_wbinv_all() cpufuncs.cf_l2cache_wbinv_all() #define cpu_l2cache_wb_range(a, s) cpufuncs.cf_l2cache_wb_range((a), (s)) #define cpu_l2cache_inv_range(a, s) cpufuncs.cf_l2cache_inv_range((a), (s)) #define cpu_l2cache_wbinv_range(a, s) cpufuncs.cf_l2cache_wbinv_range((a), (s)) #define cpu_l2cache_drain_writebuf() cpufuncs.cf_l2cache_drain_writebuf() #if __ARM_ARCH < 6 #define cpu_drain_writebuf() cpufuncs.cf_drain_writebuf() #endif #define cpu_sleep(m) cpufuncs.cf_sleep(m) #define cpu_setup() cpufuncs.cf_setup() int set_cpufuncs (void); #define ARCHITECTURE_NOT_PRESENT 1 /* known but not configured */ #define ARCHITECTURE_NOT_SUPPORTED 2 /* not known */ void cpufunc_nullop (void); u_int cpu_ident (void); u_int cpufunc_control (u_int clear, u_int bic); void cpu_domains (u_int domains); u_int cpu_faultstatus (void); u_int cpu_faultaddress (void); u_int cpu_get_control (void); u_int cpu_pfr (int); #if defined(CPU_FA526) void fa526_setup (void); void fa526_setttb (u_int ttb); void fa526_context_switch (void); void fa526_cpu_sleep (int); void fa526_tlb_flushID_SE (u_int); void fa526_icache_sync_range(vm_offset_t start, vm_size_t end); void fa526_dcache_wbinv_all (void); void fa526_dcache_wbinv_range(vm_offset_t start, vm_size_t end); void fa526_dcache_inv_range (vm_offset_t start, vm_size_t end); void fa526_dcache_wb_range (vm_offset_t start, vm_size_t end); void fa526_idcache_wbinv_all(void); void fa526_idcache_wbinv_range(vm_offset_t start, vm_size_t end); #endif #if defined(CPU_ARM9) || defined(CPU_ARM9E) void arm9_setttb (u_int); void arm9_tlb_flushID_SE (u_int va); void arm9_context_switch (void); #endif #if defined(CPU_ARM9) void arm9_icache_sync_range (vm_offset_t, vm_size_t); void arm9_dcache_wbinv_all (void); void arm9_dcache_wbinv_range (vm_offset_t, vm_size_t); void arm9_dcache_inv_range (vm_offset_t, vm_size_t); void arm9_dcache_wb_range (vm_offset_t, vm_size_t); void arm9_idcache_wbinv_all (void); void arm9_idcache_wbinv_range (vm_offset_t, vm_size_t); void arm9_setup (void); extern unsigned arm9_dcache_sets_max; extern unsigned arm9_dcache_sets_inc; extern unsigned arm9_dcache_index_max; extern unsigned arm9_dcache_index_inc; #endif #if defined(CPU_ARM9E) void arm10_setup (void); u_int sheeva_control_ext (u_int, u_int); void sheeva_cpu_sleep (int); void sheeva_setttb (u_int); void sheeva_dcache_wbinv_range (vm_offset_t, vm_size_t); void sheeva_dcache_inv_range (vm_offset_t, vm_size_t); void sheeva_dcache_wb_range (vm_offset_t, vm_size_t); void sheeva_idcache_wbinv_range (vm_offset_t, vm_size_t); void sheeva_l2cache_wbinv_range (vm_offset_t, vm_size_t); void sheeva_l2cache_inv_range (vm_offset_t, vm_size_t); void sheeva_l2cache_wb_range (vm_offset_t, vm_size_t); void sheeva_l2cache_wbinv_all (void); #endif #if defined(CPU_MV_PJ4B) void armv6_idcache_wbinv_all (void); #endif #if defined(CPU_CORTEXA8) || defined(CPU_CORTEXA_MP) || \ defined(CPU_MV_PJ4B) || defined(CPU_KRAIT) void armv7_idcache_wbinv_all (void); void armv7_cpu_sleep (int); void armv7_setup (void); void armv7_drain_writebuf (void); void cortexa_setup (void); #endif #if defined(CPU_MV_PJ4B) void pj4b_config (void); void pj4bv7_setup (void); #endif #if defined(CPU_ARM1176) void arm11_drain_writebuf (void); void arm11x6_setup (void); void arm11x6_sleep (int); /* no ref. for errata */ #endif #if defined(CPU_ARM9E) void armv5_ec_setttb(u_int); void armv5_ec_icache_sync_range(vm_offset_t, vm_size_t); void armv5_ec_dcache_wbinv_all(void); void armv5_ec_dcache_wbinv_range(vm_offset_t, vm_size_t); void armv5_ec_dcache_inv_range(vm_offset_t, vm_size_t); void armv5_ec_dcache_wb_range(vm_offset_t, vm_size_t); void armv5_ec_idcache_wbinv_all(void); void armv5_ec_idcache_wbinv_range(vm_offset_t, vm_size_t); #endif #if defined(CPU_ARM9) || defined(CPU_ARM9E) || \ defined(CPU_FA526) || \ defined(CPU_XSCALE_PXA2X0) || defined(CPU_XSCALE_IXP425) || \ defined(CPU_XSCALE_81342) void armv4_tlb_flushID (void); void armv4_tlb_flushD (void); void armv4_tlb_flushD_SE (u_int va); void armv4_drain_writebuf (void); void armv4_idcache_inv_all (void); #endif #if defined(CPU_XSCALE_PXA2X0) || defined(CPU_XSCALE_IXP425) || \ defined(CPU_XSCALE_81342) void xscale_cpwait (void); void xscale_cpu_sleep (int mode); u_int xscale_control (u_int clear, u_int bic); void xscale_setttb (u_int ttb); void xscale_tlb_flushID_SE (u_int va); void xscale_cache_flushID (void); void xscale_cache_flushI (void); void xscale_cache_flushD (void); void xscale_cache_flushD_SE (u_int entry); void xscale_cache_cleanID (void); void xscale_cache_cleanD (void); void xscale_cache_cleanD_E (u_int entry); void xscale_cache_clean_minidata (void); void xscale_cache_purgeID (void); void xscale_cache_purgeID_E (u_int entry); void xscale_cache_purgeD (void); void xscale_cache_purgeD_E (u_int entry); void xscale_cache_syncI (void); void xscale_cache_cleanID_rng (vm_offset_t start, vm_size_t end); void xscale_cache_cleanD_rng (vm_offset_t start, vm_size_t end); void xscale_cache_purgeID_rng (vm_offset_t start, vm_size_t end); void xscale_cache_purgeD_rng (vm_offset_t start, vm_size_t end); void xscale_cache_syncI_rng (vm_offset_t start, vm_size_t end); void xscale_cache_flushD_rng (vm_offset_t start, vm_size_t end); void xscale_context_switch (void); void xscale_setup (void); #endif /* CPU_XSCALE_PXA2X0 || CPU_XSCALE_IXP425 */ #ifdef CPU_XSCALE_81342 void xscalec3_l2cache_purge (void); void xscalec3_cache_purgeID (void); void xscalec3_cache_purgeD (void); void xscalec3_cache_cleanID (void); void xscalec3_cache_cleanD (void); void xscalec3_cache_syncI (void); void xscalec3_cache_purgeID_rng (vm_offset_t start, vm_size_t end); void xscalec3_cache_purgeD_rng (vm_offset_t start, vm_size_t end); void xscalec3_cache_cleanID_rng (vm_offset_t start, vm_size_t end); void xscalec3_cache_cleanD_rng (vm_offset_t start, vm_size_t end); void xscalec3_cache_syncI_rng (vm_offset_t start, vm_size_t end); void xscalec3_l2cache_flush_rng (vm_offset_t, vm_size_t); void xscalec3_l2cache_clean_rng (vm_offset_t start, vm_size_t end); void xscalec3_l2cache_purge_rng (vm_offset_t start, vm_size_t end); void xscalec3_setttb (u_int ttb); void xscalec3_context_switch (void); #endif /* CPU_XSCALE_81342 */ /* * Macros for manipulating CPU interrupts */ #if __ARM_ARCH < 6 #define __ARM_INTR_BITS (PSR_I | PSR_F) #else #define __ARM_INTR_BITS (PSR_I | PSR_F | PSR_A) #endif static __inline uint32_t __set_cpsr(uint32_t bic, uint32_t eor) { uint32_t tmp, ret; __asm __volatile( "mrs %0, cpsr\n" /* Get the CPSR */ "bic %1, %0, %2\n" /* Clear bits */ "eor %1, %1, %3\n" /* XOR bits */ "msr cpsr_xc, %1\n" /* Set the CPSR */ : "=&r" (ret), "=&r" (tmp) : "r" (bic), "r" (eor) : "memory"); return ret; } static __inline uint32_t disable_interrupts(uint32_t mask) { return (__set_cpsr(mask & __ARM_INTR_BITS, mask & __ARM_INTR_BITS)); } static __inline uint32_t enable_interrupts(uint32_t mask) { return (__set_cpsr(mask & __ARM_INTR_BITS, 0)); } static __inline uint32_t restore_interrupts(uint32_t old_cpsr) { return (__set_cpsr(__ARM_INTR_BITS, old_cpsr & __ARM_INTR_BITS)); } static __inline register_t intr_disable(void) { return (disable_interrupts(PSR_I | PSR_F)); } static __inline void intr_restore(register_t s) { restore_interrupts(s); } #undef __ARM_INTR_BITS /* * Functions to manipulate cpu r13 * (in arm/arm32/setstack.S) */ void set_stackptr (u_int mode, u_int address); u_int get_stackptr (u_int mode); /* * Miscellany */ int get_pc_str_offset (void); /* * CPU functions from locore.S */ void cpu_reset (void) __attribute__((__noreturn__)); /* * Cache info variables. */ /* PRIMARY CACHE VARIABLES */ extern int arm_picache_size; extern int arm_picache_line_size; extern int arm_picache_ways; extern int arm_pdcache_size; /* and unified */ extern int arm_pdcache_line_size; extern int arm_pdcache_ways; extern int arm_pcache_type; extern int arm_pcache_unified; extern int arm_dcache_align; extern int arm_dcache_align_mask; extern u_int arm_cache_level; extern u_int arm_cache_loc; extern u_int arm_cache_type[14]; #endif /* _KERNEL */ #endif /* _MACHINE_CPUFUNC_H_ */ /* End of cpufunc.h */ Index: head/sys/arm/include/pcpu.h =================================================================== --- head/sys/arm/include/pcpu.h (revision 312291) +++ head/sys/arm/include/pcpu.h (revision 312292) @@ -1,141 +1,139 @@ /*- * Copyright (c) 1999 Luoqi Chen * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: FreeBSD: src/sys/i386/include/globaldata.h,v 1.27 2001/04/27 * $FreeBSD$ */ #ifndef _MACHINE_PCPU_H_ #define _MACHINE_PCPU_H_ #ifdef _KERNEL -#include - #define ALT_STACK_SIZE 128 struct vmspace; #endif /* _KERNEL */ #if __ARM_ARCH >= 6 #define PCPU_MD_FIELDS \ unsigned int pc_vfpsid; \ unsigned int pc_vfpmvfr0; \ unsigned int pc_vfpmvfr1; \ struct pmap *pc_curpmap; \ vm_offset_t pc_qmap_addr; \ void *pc_qmap_pte; \ unsigned int pc_dbreg[32]; \ int pc_dbreg_cmd; \ char __pad[1] #else #define PCPU_MD_FIELDS \ vm_offset_t qmap_addr; \ void *pc_qmap_pte; \ char __pad[149] #endif #ifdef _KERNEL #define PC_DBREG_CMD_NONE 0 #define PC_DBREG_CMD_LOAD 1 struct pcb; struct pcpu; extern struct pcpu *pcpup; #if __ARM_ARCH >= 6 #define CPU_MASK (0xf) #ifndef SMP #define get_pcpu() (pcpup) #else #define get_pcpu() __extension__ ({ \ int id; \ __asm __volatile("mrc p15, 0, %0, c0, c0, 5" : "=r" (id)); \ (pcpup + (id & CPU_MASK)); \ }) #endif static inline struct thread * get_curthread(void) { void *ret; __asm __volatile("mrc p15, 0, %0, c13, c0, 4" : "=r" (ret)); return (ret); } static inline void set_curthread(struct thread *td) { __asm __volatile("mcr p15, 0, %0, c13, c0, 4" : : "r" (td)); } static inline void * get_tls(void) { void *tls; /* TPIDRURW contains the authoritative value. */ __asm __volatile("mrc p15, 0, %0, c13, c0, 2" : "=r" (tls)); return (tls); } static inline void set_tls(void *tls) { /* * Update both TPIDRURW and TPIDRURO. TPIDRURW needs to be written * first to ensure that a context switch between the two writes will * still give the desired result of updating both. */ __asm __volatile( "mcr p15, 0, %0, c13, c0, 2\n" "mcr p15, 0, %0, c13, c0, 3\n" : : "r" (tls)); } #define curthread get_curthread() #else #define get_pcpu() pcpup #endif #define PCPU_GET(member) (get_pcpu()->pc_ ## member) #define PCPU_ADD(member, value) (get_pcpu()->pc_ ## member += (value)) #define PCPU_INC(member) PCPU_ADD(member, 1) #define PCPU_PTR(member) (&get_pcpu()->pc_ ## member) #define PCPU_SET(member,value) (get_pcpu()->pc_ ## member = (value)) void pcpu0_init(void); #endif /* _KERNEL */ #endif /* !_MACHINE_PCPU_H_ */ Index: head/sys/arm/include/pmap-v4.h =================================================================== --- head/sys/arm/include/pmap-v4.h (revision 312291) +++ head/sys/arm/include/pmap-v4.h (revision 312292) @@ -1,516 +1,539 @@ /*- * Copyright (c) 1991 Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department and William Jolitz of UUNET Technologies Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Derived from hp300 version by Mike Hibler, this version by William * Jolitz uses a recursive map [a pde points to the page directory] to * map the page tables using the pagetables themselves. This is done to * reduce the impact on kernel virtual memory for lots of sparse address * space, and to reduce the cost of memory to each process. * * from: hp300: @(#)pmap.h 7.2 (Berkeley) 12/16/90 * from: @(#)pmap.h 7.4 (Berkeley) 5/12/91 * from: FreeBSD: src/sys/i386/include/pmap.h,v 1.70 2000/11/30 * * $FreeBSD$ */ #ifndef _MACHINE_PMAP_V4_H_ #define _MACHINE_PMAP_V4_H_ #include -#include + +/* + * Define the MMU types we support based on the cpu types. While the code has + * some theoretical support for multiple MMU types in a single kernel, there are + * no actual working configurations that use that feature. + */ +#if (defined(CPU_ARM9) || defined(CPU_ARM9E) || defined(CPU_FA526)) +#define ARM_MMU_GENERIC 1 +#else +#define ARM_MMU_GENERIC 0 +#endif + +#if (defined(CPU_XSCALE_PXA2X0) || defined(CPU_XSCALE_IXP425) || \ + defined(CPU_XSCALE_81342)) +#define ARM_MMU_XSCALE 1 +#else +#define ARM_MMU_XSCALE 0 +#endif + +#define ARM_NMMUS (ARM_MMU_GENERIC + ARM_MMU_XSCALE) +#if ARM_NMMUS == 0 && !defined(KLD_MODULE) && defined(_KERNEL) +#error ARM_NMMUS is 0 +#endif + /* * Pte related macros */ #define PTE_NOCACHE 1 #define PTE_CACHE 2 #define PTE_DEVICE PTE_NOCACHE #define PTE_PAGETABLE 3 enum mem_type { STRONG_ORD = 0, DEVICE_NOSHARE, DEVICE_SHARE, NRML_NOCACHE, NRML_IWT_OWT, NRML_IWB_OWB, NRML_IWBA_OWBA }; #ifndef LOCORE #include #include #include #include #define PDESIZE sizeof(pd_entry_t) /* for assembly files */ #define PTESIZE sizeof(pt_entry_t) /* for assembly files */ #define pmap_page_get_memattr(m) ((m)->md.pv_memattr) #define pmap_page_is_mapped(m) (!TAILQ_EMPTY(&(m)->md.pv_list)) /* * Pmap stuff */ /* * This structure is used to hold a virtual<->physical address * association and is used mostly by bootstrap code */ struct pv_addr { SLIST_ENTRY(pv_addr) pv_list; vm_offset_t pv_va; vm_paddr_t pv_pa; }; struct pv_entry; struct pv_chunk; struct md_page { int pvh_attrs; vm_memattr_t pv_memattr; vm_offset_t pv_kva; /* first kernel VA mapping */ TAILQ_HEAD(,pv_entry) pv_list; }; struct l1_ttable; struct l2_dtable; /* * The number of L2 descriptor tables which can be tracked by an l2_dtable. * A bucket size of 16 provides for 16MB of contiguous virtual address * space per l2_dtable. Most processes will, therefore, require only two or * three of these to map their whole working set. */ #define L2_BUCKET_LOG2 4 #define L2_BUCKET_SIZE (1 << L2_BUCKET_LOG2) /* * Given the above "L2-descriptors-per-l2_dtable" constant, the number * of l2_dtable structures required to track all possible page descriptors * mappable by an L1 translation table is given by the following constants: */ #define L2_LOG2 ((32 - L1_S_SHIFT) - L2_BUCKET_LOG2) #define L2_SIZE (1 << L2_LOG2) struct pmap { struct mtx pm_mtx; u_int8_t pm_domain; struct l1_ttable *pm_l1; struct l2_dtable *pm_l2[L2_SIZE]; cpuset_t pm_active; /* active on cpus */ struct pmap_statistics pm_stats; /* pmap statictics */ TAILQ_HEAD(,pv_entry) pm_pvlist; /* list of mappings in pmap */ }; typedef struct pmap *pmap_t; #ifdef _KERNEL extern struct pmap kernel_pmap_store; #define kernel_pmap (&kernel_pmap_store) #define PMAP_ASSERT_LOCKED(pmap) \ mtx_assert(&(pmap)->pm_mtx, MA_OWNED) #define PMAP_LOCK(pmap) mtx_lock(&(pmap)->pm_mtx) #define PMAP_LOCK_DESTROY(pmap) mtx_destroy(&(pmap)->pm_mtx) #define PMAP_LOCK_INIT(pmap) mtx_init(&(pmap)->pm_mtx, "pmap", \ NULL, MTX_DEF | MTX_DUPOK) #define PMAP_OWNED(pmap) mtx_owned(&(pmap)->pm_mtx) #define PMAP_MTX(pmap) (&(pmap)->pm_mtx) #define PMAP_TRYLOCK(pmap) mtx_trylock(&(pmap)->pm_mtx) #define PMAP_UNLOCK(pmap) mtx_unlock(&(pmap)->pm_mtx) #endif /* * For each vm_page_t, there is a list of all currently valid virtual * mappings of that page. An entry is a pv_entry_t, the list is pv_list. */ typedef struct pv_entry { vm_offset_t pv_va; /* virtual address for mapping */ TAILQ_ENTRY(pv_entry) pv_list; int pv_flags; /* flags (wired, etc...) */ pmap_t pv_pmap; /* pmap where mapping lies */ TAILQ_ENTRY(pv_entry) pv_plist; } *pv_entry_t; /* * pv_entries are allocated in chunks per-process. This avoids the * need to track per-pmap assignments. */ #define _NPCM 8 #define _NPCPV 252 struct pv_chunk { pmap_t pc_pmap; TAILQ_ENTRY(pv_chunk) pc_list; uint32_t pc_map[_NPCM]; /* bitmap; 1 = free */ uint32_t pc_dummy[3]; /* aligns pv_chunk to 4KB */ TAILQ_ENTRY(pv_chunk) pc_lru; struct pv_entry pc_pventry[_NPCPV]; }; #ifdef _KERNEL boolean_t pmap_get_pde_pte(pmap_t, vm_offset_t, pd_entry_t **, pt_entry_t **); /* * virtual address to page table entry and * to physical address. Likewise for alternate address space. * Note: these work recursively, thus vtopte of a pte will give * the corresponding pde that in turn maps it. */ /* * The current top of kernel VM. */ extern vm_offset_t pmap_curmaxkvaddr; /* Virtual address to page table entry */ static __inline pt_entry_t * vtopte(vm_offset_t va) { pd_entry_t *pdep; pt_entry_t *ptep; if (pmap_get_pde_pte(kernel_pmap, va, &pdep, &ptep) == FALSE) return (NULL); return (ptep); } void pmap_bootstrap(vm_offset_t firstaddr, struct pv_addr *l1pt); int pmap_change_attr(vm_offset_t, vm_size_t, int); void pmap_kenter(vm_offset_t va, vm_paddr_t pa); void pmap_kenter_nocache(vm_offset_t va, vm_paddr_t pa); void pmap_kenter_user(vm_offset_t va, vm_paddr_t pa); vm_paddr_t pmap_dump_kextract(vm_offset_t, pt2_entry_t *); void pmap_kremove(vm_offset_t); vm_page_t pmap_use_pt(pmap_t, vm_offset_t); void pmap_debug(int); void pmap_map_section(vm_offset_t, vm_offset_t, vm_offset_t, int, int); void pmap_link_l2pt(vm_offset_t, vm_offset_t, struct pv_addr *); vm_size_t pmap_map_chunk(vm_offset_t, vm_offset_t, vm_offset_t, vm_size_t, int, int); void pmap_map_entry(vm_offset_t l1pt, vm_offset_t va, vm_offset_t pa, int prot, int cache); int pmap_fault_fixup(pmap_t, vm_offset_t, vm_prot_t, int); /* * Definitions for MMU domains */ #define PMAP_DOMAINS 15 /* 15 'user' domains (1-15) */ #define PMAP_DOMAIN_KERNEL 0 /* The kernel uses domain #0 */ /* * The new pmap ensures that page-tables are always mapping Write-Thru. * Thus, on some platforms we can run fast and loose and avoid syncing PTEs * on every change. * * Unfortunately, not all CPUs have a write-through cache mode. So we * define PMAP_NEEDS_PTE_SYNC for C code to conditionally do PTE syncs, * and if there is the chance for PTE syncs to be needed, we define * PMAP_INCLUDE_PTE_SYNC so e.g. assembly code can include (and run) * the code. */ extern int pmap_needs_pte_sync; /* * These macros define the various bit masks in the PTE. * * We use these macros since we use different bits on different processor * models. */ #define L1_S_CACHE_MASK_generic (L1_S_B|L1_S_C) #define L1_S_CACHE_MASK_xscale (L1_S_B|L1_S_C|L1_S_XSCALE_TEX(TEX_XSCALE_X)|\ L1_S_XSCALE_TEX(TEX_XSCALE_T)) #define L2_L_CACHE_MASK_generic (L2_B|L2_C) #define L2_L_CACHE_MASK_xscale (L2_B|L2_C|L2_XSCALE_L_TEX(TEX_XSCALE_X) | \ L2_XSCALE_L_TEX(TEX_XSCALE_T)) #define L2_S_PROT_U_generic (L2_AP(AP_U)) #define L2_S_PROT_W_generic (L2_AP(AP_W)) #define L2_S_PROT_MASK_generic (L2_S_PROT_U|L2_S_PROT_W) #define L2_S_PROT_U_xscale (L2_AP0(AP_U)) #define L2_S_PROT_W_xscale (L2_AP0(AP_W)) #define L2_S_PROT_MASK_xscale (L2_S_PROT_U|L2_S_PROT_W) #define L2_S_CACHE_MASK_generic (L2_B|L2_C) #define L2_S_CACHE_MASK_xscale (L2_B|L2_C|L2_XSCALE_T_TEX(TEX_XSCALE_X)| \ L2_XSCALE_T_TEX(TEX_XSCALE_X)) #define L1_S_PROTO_generic (L1_TYPE_S | L1_S_IMP) #define L1_S_PROTO_xscale (L1_TYPE_S) #define L1_C_PROTO_generic (L1_TYPE_C | L1_C_IMP2) #define L1_C_PROTO_xscale (L1_TYPE_C) #define L2_L_PROTO (L2_TYPE_L) #define L2_S_PROTO_generic (L2_TYPE_S) #define L2_S_PROTO_xscale (L2_TYPE_XSCALE_XS) /* * User-visible names for the ones that vary with MMU class. */ #define L2_AP(x) (L2_AP0(x) | L2_AP1(x) | L2_AP2(x) | L2_AP3(x)) #if ARM_NMMUS > 1 /* More than one MMU class configured; use variables. */ #define L2_S_PROT_U pte_l2_s_prot_u #define L2_S_PROT_W pte_l2_s_prot_w #define L2_S_PROT_MASK pte_l2_s_prot_mask #define L1_S_CACHE_MASK pte_l1_s_cache_mask #define L2_L_CACHE_MASK pte_l2_l_cache_mask #define L2_S_CACHE_MASK pte_l2_s_cache_mask #define L1_S_PROTO pte_l1_s_proto #define L1_C_PROTO pte_l1_c_proto #define L2_S_PROTO pte_l2_s_proto #elif ARM_MMU_GENERIC != 0 #define L2_S_PROT_U L2_S_PROT_U_generic #define L2_S_PROT_W L2_S_PROT_W_generic #define L2_S_PROT_MASK L2_S_PROT_MASK_generic #define L1_S_CACHE_MASK L1_S_CACHE_MASK_generic #define L2_L_CACHE_MASK L2_L_CACHE_MASK_generic #define L2_S_CACHE_MASK L2_S_CACHE_MASK_generic #define L1_S_PROTO L1_S_PROTO_generic #define L1_C_PROTO L1_C_PROTO_generic #define L2_S_PROTO L2_S_PROTO_generic #elif ARM_MMU_XSCALE == 1 #define L2_S_PROT_U L2_S_PROT_U_xscale #define L2_S_PROT_W L2_S_PROT_W_xscale #define L2_S_PROT_MASK L2_S_PROT_MASK_xscale #define L1_S_CACHE_MASK L1_S_CACHE_MASK_xscale #define L2_L_CACHE_MASK L2_L_CACHE_MASK_xscale #define L2_S_CACHE_MASK L2_S_CACHE_MASK_xscale #define L1_S_PROTO L1_S_PROTO_xscale #define L1_C_PROTO L1_C_PROTO_xscale #define L2_S_PROTO L2_S_PROTO_xscale #endif /* ARM_NMMUS > 1 */ #if defined(CPU_XSCALE_81342) #define PMAP_NEEDS_PTE_SYNC 1 #define PMAP_INCLUDE_PTE_SYNC #else #define PMAP_NEEDS_PTE_SYNC 0 #endif /* * These macros return various bits based on kernel/user and protection. * Note that the compiler will usually fold these at compile time. */ #define L1_S_PROT_U (L1_S_AP(AP_U)) #define L1_S_PROT_W (L1_S_AP(AP_W)) #define L1_S_PROT_MASK (L1_S_PROT_U|L1_S_PROT_W) #define L1_S_WRITABLE(pd) ((pd) & L1_S_PROT_W) #define L1_S_PROT(ku, pr) ((((ku) == PTE_USER) ? L1_S_PROT_U : 0) | \ (((pr) & VM_PROT_WRITE) ? L1_S_PROT_W : 0)) #define L2_L_PROT_U (L2_AP(AP_U)) #define L2_L_PROT_W (L2_AP(AP_W)) #define L2_L_PROT_MASK (L2_L_PROT_U|L2_L_PROT_W) #define L2_L_PROT(ku, pr) ((((ku) == PTE_USER) ? L2_L_PROT_U : 0) | \ (((pr) & VM_PROT_WRITE) ? L2_L_PROT_W : 0)) #define L2_S_PROT(ku, pr) ((((ku) == PTE_USER) ? L2_S_PROT_U : 0) | \ (((pr) & VM_PROT_WRITE) ? L2_S_PROT_W : 0)) /* * Macros to test if a mapping is mappable with an L1 Section mapping * or an L2 Large Page mapping. */ #define L1_S_MAPPABLE_P(va, pa, size) \ ((((va) | (pa)) & L1_S_OFFSET) == 0 && (size) >= L1_S_SIZE) #define L2_L_MAPPABLE_P(va, pa, size) \ ((((va) | (pa)) & L2_L_OFFSET) == 0 && (size) >= L2_L_SIZE) /* * Provide a fallback in case we were not able to determine it at * compile-time. */ #ifndef PMAP_NEEDS_PTE_SYNC #define PMAP_NEEDS_PTE_SYNC pmap_needs_pte_sync #define PMAP_INCLUDE_PTE_SYNC #endif #ifdef ARM_L2_PIPT #define _sync_l2(pte, size) cpu_l2cache_wb_range(vtophys(pte), size) #else #define _sync_l2(pte, size) cpu_l2cache_wb_range(pte, size) #endif #define PTE_SYNC(pte) \ do { \ if (PMAP_NEEDS_PTE_SYNC) { \ cpu_dcache_wb_range((vm_offset_t)(pte), sizeof(pt_entry_t));\ cpu_drain_writebuf(); \ _sync_l2((vm_offset_t)(pte), sizeof(pt_entry_t));\ } else \ cpu_drain_writebuf(); \ } while (/*CONSTCOND*/0) #define PTE_SYNC_RANGE(pte, cnt) \ do { \ if (PMAP_NEEDS_PTE_SYNC) { \ cpu_dcache_wb_range((vm_offset_t)(pte), \ (cnt) << 2); /* * sizeof(pt_entry_t) */ \ cpu_drain_writebuf(); \ _sync_l2((vm_offset_t)(pte), \ (cnt) << 2); /* * sizeof(pt_entry_t) */ \ } else \ cpu_drain_writebuf(); \ } while (/*CONSTCOND*/0) extern pt_entry_t pte_l1_s_cache_mode; extern pt_entry_t pte_l1_s_cache_mask; extern pt_entry_t pte_l2_l_cache_mode; extern pt_entry_t pte_l2_l_cache_mask; extern pt_entry_t pte_l2_s_cache_mode; extern pt_entry_t pte_l2_s_cache_mask; extern pt_entry_t pte_l1_s_cache_mode_pt; extern pt_entry_t pte_l2_l_cache_mode_pt; extern pt_entry_t pte_l2_s_cache_mode_pt; extern pt_entry_t pte_l2_s_prot_u; extern pt_entry_t pte_l2_s_prot_w; extern pt_entry_t pte_l2_s_prot_mask; extern pt_entry_t pte_l1_s_proto; extern pt_entry_t pte_l1_c_proto; extern pt_entry_t pte_l2_s_proto; extern void (*pmap_copy_page_func)(vm_paddr_t, vm_paddr_t); extern void (*pmap_copy_page_offs_func)(vm_paddr_t a_phys, vm_offset_t a_offs, vm_paddr_t b_phys, vm_offset_t b_offs, int cnt); extern void (*pmap_zero_page_func)(vm_paddr_t, int, int); #if ARM_MMU_GENERIC != 0 || defined(CPU_XSCALE_81342) void pmap_copy_page_generic(vm_paddr_t, vm_paddr_t); void pmap_zero_page_generic(vm_paddr_t, int, int); void pmap_pte_init_generic(void); #endif /* ARM_MMU_GENERIC != 0 */ #if ARM_MMU_XSCALE == 1 void pmap_copy_page_xscale(vm_paddr_t, vm_paddr_t); void pmap_zero_page_xscale(vm_paddr_t, int, int); void pmap_pte_init_xscale(void); void xscale_setup_minidata(vm_offset_t, vm_offset_t, vm_offset_t); void pmap_use_minicache(vm_offset_t, vm_size_t); #endif /* ARM_MMU_XSCALE == 1 */ #if defined(CPU_XSCALE_81342) #define ARM_HAVE_SUPERSECTIONS #endif #define PTE_KERNEL 0 #define PTE_USER 1 #define l1pte_valid(pde) ((pde) != 0) #define l1pte_section_p(pde) (((pde) & L1_TYPE_MASK) == L1_TYPE_S) #define l1pte_page_p(pde) (((pde) & L1_TYPE_MASK) == L1_TYPE_C) #define l1pte_fpage_p(pde) (((pde) & L1_TYPE_MASK) == L1_TYPE_F) #define l2pte_index(v) (((v) & L1_S_OFFSET) >> L2_S_SHIFT) #define l2pte_valid(pte) ((pte) != 0) #define l2pte_pa(pte) ((pte) & L2_S_FRAME) #define l2pte_minidata(pte) (((pte) & \ (L2_B | L2_C | L2_XSCALE_T_TEX(TEX_XSCALE_X)))\ == (L2_C | L2_XSCALE_T_TEX(TEX_XSCALE_X))) /* L1 and L2 page table macros */ #define pmap_pde_v(pde) l1pte_valid(*(pde)) #define pmap_pde_section(pde) l1pte_section_p(*(pde)) #define pmap_pde_page(pde) l1pte_page_p(*(pde)) #define pmap_pde_fpage(pde) l1pte_fpage_p(*(pde)) #define pmap_pte_v(pte) l2pte_valid(*(pte)) #define pmap_pte_pa(pte) l2pte_pa(*(pte)) /* * Flags that indicate attributes of pages or mappings of pages. * * The PVF_MOD and PVF_REF flags are stored in the mdpage for each * page. PVF_WIRED, PVF_WRITE, and PVF_NC are kept in individual * pv_entry's for each page. They live in the same "namespace" so * that we can clear multiple attributes at a time. * * Note the "non-cacheable" flag generally means the page has * multiple mappings in a given address space. */ #define PVF_MOD 0x01 /* page is modified */ #define PVF_REF 0x02 /* page is referenced */ #define PVF_WIRED 0x04 /* mapping is wired */ #define PVF_WRITE 0x08 /* mapping is writable */ #define PVF_EXEC 0x10 /* mapping is executable */ #define PVF_NC 0x20 /* mapping is non-cacheable */ #define PVF_MWC 0x40 /* mapping is used multiple times in userland */ #define PVF_UNMAN 0x80 /* mapping is unmanaged */ void vector_page_setprot(int); #define SECTION_CACHE 0x1 #define SECTION_PT 0x2 void pmap_kenter_section(vm_offset_t, vm_paddr_t, int flags); #ifdef ARM_HAVE_SUPERSECTIONS void pmap_kenter_supersection(vm_offset_t, uint64_t, int flags); #endif void pmap_postinit(void); #endif /* _KERNEL */ #endif /* !LOCORE */ #endif /* !_MACHINE_PMAP_V4_H_ */