Index: stable/11/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c =================================================================== --- stable/11/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c (revision 302861) +++ stable/11/sys/dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c (revision 302862) @@ -1,2170 +1,2174 @@ /*- * Copyright (c) 2009-2012,2016 Microsoft Corp. * Copyright (c) 2012 NetApp Inc. * Copyright (c) 2012 Citrix Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /** * StorVSC driver for Hyper-V. This driver presents a SCSI HBA interface * to the Comman Access Method (CAM) layer. CAM control blocks (CCBs) are * converted into VSCSI protocol messages which are delivered to the parent * partition StorVSP driver over the Hyper-V VMBUS. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "hv_vstorage.h" #define STORVSC_RINGBUFFER_SIZE (20*PAGE_SIZE) #define STORVSC_MAX_LUNS_PER_TARGET (64) #define STORVSC_MAX_IO_REQUESTS (STORVSC_MAX_LUNS_PER_TARGET * 2) #define BLKVSC_MAX_IDE_DISKS_PER_TARGET (1) #define BLKVSC_MAX_IO_REQUESTS STORVSC_MAX_IO_REQUESTS #define STORVSC_MAX_TARGETS (2) #define VSTOR_PKT_SIZE (sizeof(struct vstor_packet) - vmscsi_size_delta) #define HV_ALIGN(x, a) roundup2(x, a) struct storvsc_softc; struct hv_sgl_node { LIST_ENTRY(hv_sgl_node) link; struct sglist *sgl_data; }; struct hv_sgl_page_pool{ LIST_HEAD(, hv_sgl_node) in_use_sgl_list; LIST_HEAD(, hv_sgl_node) free_sgl_list; boolean_t is_init; } g_hv_sgl_page_pool; #define STORVSC_MAX_SG_PAGE_CNT STORVSC_MAX_IO_REQUESTS * HV_MAX_MULTIPAGE_BUFFER_COUNT enum storvsc_request_type { WRITE_TYPE, READ_TYPE, UNKNOWN_TYPE }; struct hv_storvsc_request { LIST_ENTRY(hv_storvsc_request) link; struct vstor_packet vstor_packet; hv_vmbus_multipage_buffer data_buf; void *sense_data; uint8_t sense_info_len; uint8_t retries; union ccb *ccb; struct storvsc_softc *softc; struct callout callout; struct sema synch_sema; /*Synchronize the request/response if needed */ struct sglist *bounce_sgl; unsigned int bounce_sgl_count; uint64_t not_aligned_seg_bits; }; struct storvsc_softc { struct hv_device *hs_dev; LIST_HEAD(, hv_storvsc_request) hs_free_list; struct mtx hs_lock; struct storvsc_driver_props *hs_drv_props; int hs_unit; uint32_t hs_frozen; struct cam_sim *hs_sim; struct cam_path *hs_path; uint32_t hs_num_out_reqs; boolean_t hs_destroy; boolean_t hs_drain_notify; struct sema hs_drain_sema; struct hv_storvsc_request hs_init_req; struct hv_storvsc_request hs_reset_req; }; /** * HyperV storvsc timeout testing cases: * a. IO returned after first timeout; * b. IO returned after second timeout and queue freeze; * c. IO returned while timer handler is running * The first can be tested by "sg_senddiag -vv /dev/daX", * and the second and third can be done by * "sg_wr_mode -v -p 08 -c 0,1a -m 0,ff /dev/daX". */ #define HVS_TIMEOUT_TEST 0 /* * Bus/adapter reset functionality on the Hyper-V host is * buggy and it will be disabled until * it can be further tested. */ #define HVS_HOST_RESET 0 struct storvsc_driver_props { char *drv_name; char *drv_desc; uint8_t drv_max_luns_per_target; uint8_t drv_max_ios_per_target; uint32_t drv_ringbuffer_size; }; enum hv_storage_type { DRIVER_BLKVSC, DRIVER_STORVSC, DRIVER_UNKNOWN }; #define HS_MAX_ADAPTERS 10 #define HV_STORAGE_SUPPORTS_MULTI_CHANNEL 0x1 /* {ba6163d9-04a1-4d29-b605-72e2ffb1dc7f} */ static const hv_guid gStorVscDeviceType={ .data = {0xd9, 0x63, 0x61, 0xba, 0xa1, 0x04, 0x29, 0x4d, 0xb6, 0x05, 0x72, 0xe2, 0xff, 0xb1, 0xdc, 0x7f} }; /* {32412632-86cb-44a2-9b5c-50d1417354f5} */ static const hv_guid gBlkVscDeviceType={ .data = {0x32, 0x26, 0x41, 0x32, 0xcb, 0x86, 0xa2, 0x44, 0x9b, 0x5c, 0x50, 0xd1, 0x41, 0x73, 0x54, 0xf5} }; static struct storvsc_driver_props g_drv_props_table[] = { {"blkvsc", "Hyper-V IDE Storage Interface", BLKVSC_MAX_IDE_DISKS_PER_TARGET, BLKVSC_MAX_IO_REQUESTS, STORVSC_RINGBUFFER_SIZE}, {"storvsc", "Hyper-V SCSI Storage Interface", STORVSC_MAX_LUNS_PER_TARGET, STORVSC_MAX_IO_REQUESTS, STORVSC_RINGBUFFER_SIZE} }; /* * Sense buffer size changed in win8; have a run-time * variable to track the size we should use. */ static int sense_buffer_size = PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE; /* * The size of the vmscsi_request has changed in win8. The * additional size is for the newly added elements in the * structure. These elements are valid only when we are talking * to a win8 host. * Track the correct size we need to apply. */ static int vmscsi_size_delta; /* * The storage protocol version is determined during the * initial exchange with the host. It will indicate which * storage functionality is available in the host. */ static int vmstor_proto_version; struct vmstor_proto { int proto_version; int sense_buffer_size; int vmscsi_size_delta; }; static const struct vmstor_proto vmstor_proto_list[] = { { VMSTOR_PROTOCOL_VERSION_WIN10, POST_WIN7_STORVSC_SENSE_BUFFER_SIZE, 0 }, { VMSTOR_PROTOCOL_VERSION_WIN8_1, POST_WIN7_STORVSC_SENSE_BUFFER_SIZE, 0 }, { VMSTOR_PROTOCOL_VERSION_WIN8, POST_WIN7_STORVSC_SENSE_BUFFER_SIZE, 0 }, { VMSTOR_PROTOCOL_VERSION_WIN7, PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE, sizeof(struct vmscsi_win8_extension), }, { VMSTOR_PROTOCOL_VERSION_WIN6, PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE, sizeof(struct vmscsi_win8_extension), } }; /* static functions */ static int storvsc_probe(device_t dev); static int storvsc_attach(device_t dev); static int storvsc_detach(device_t dev); static void storvsc_poll(struct cam_sim * sim); static void storvsc_action(struct cam_sim * sim, union ccb * ccb); static int create_storvsc_request(union ccb *ccb, struct hv_storvsc_request *reqp); static void storvsc_free_request(struct storvsc_softc *sc, struct hv_storvsc_request *reqp); static enum hv_storage_type storvsc_get_storage_type(device_t dev); static void hv_storvsc_rescan_target(struct storvsc_softc *sc); static void hv_storvsc_on_channel_callback(void *context); static void hv_storvsc_on_iocompletion( struct storvsc_softc *sc, struct vstor_packet *vstor_packet, struct hv_storvsc_request *request); static int hv_storvsc_connect_vsp(struct hv_device *device); static void storvsc_io_done(struct hv_storvsc_request *reqp); static void storvsc_copy_sgl_to_bounce_buf(struct sglist *bounce_sgl, bus_dma_segment_t *orig_sgl, unsigned int orig_sgl_count, uint64_t seg_bits); void storvsc_copy_from_bounce_buf_to_sgl(bus_dma_segment_t *dest_sgl, unsigned int dest_sgl_count, struct sglist* src_sgl, uint64_t seg_bits); static device_method_t storvsc_methods[] = { /* Device interface */ DEVMETHOD(device_probe, storvsc_probe), DEVMETHOD(device_attach, storvsc_attach), DEVMETHOD(device_detach, storvsc_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD_END }; static driver_t storvsc_driver = { "storvsc", storvsc_methods, sizeof(struct storvsc_softc), }; static devclass_t storvsc_devclass; DRIVER_MODULE(storvsc, vmbus, storvsc_driver, storvsc_devclass, 0, 0); MODULE_VERSION(storvsc, 1); MODULE_DEPEND(storvsc, vmbus, 1, 1, 1); /** * The host is capable of sending messages to us that are * completely unsolicited. So, we need to address the race * condition where we may be in the process of unloading the * driver when the host may send us an unsolicited message. * We address this issue by implementing a sequentially * consistent protocol: * * 1. Channel callback is invoked while holding the channel lock * and an unloading driver will reset the channel callback under * the protection of this channel lock. * * 2. To ensure bounded wait time for unloading a driver, we don't * permit outgoing traffic once the device is marked as being * destroyed. * * 3. Once the device is marked as being destroyed, we only * permit incoming traffic to properly account for * packets already sent out. */ static inline struct storvsc_softc * get_stor_device(struct hv_device *device, boolean_t outbound) { struct storvsc_softc *sc; sc = device_get_softc(device->device); if (outbound) { /* * Here we permit outgoing I/O only * if the device is not being destroyed. */ if (sc->hs_destroy) { sc = NULL; } } else { /* * inbound case; if being destroyed * only permit to account for * messages already sent out. */ if (sc->hs_destroy && (sc->hs_num_out_reqs == 0)) { sc = NULL; } } return sc; } static void storvsc_subchan_attach(struct hv_vmbus_channel *new_channel) { struct hv_device *device; struct storvsc_softc *sc; struct vmstor_chan_props props; int ret = 0; device = new_channel->device; sc = get_stor_device(device, TRUE); if (sc == NULL) return; memset(&props, 0, sizeof(props)); ret = hv_vmbus_channel_open(new_channel, sc->hs_drv_props->drv_ringbuffer_size, sc->hs_drv_props->drv_ringbuffer_size, (void *)&props, sizeof(struct vmstor_chan_props), hv_storvsc_on_channel_callback, new_channel); return; } /** * @brief Send multi-channel creation request to host * * @param device a Hyper-V device pointer * @param max_chans the max channels supported by vmbus */ static void storvsc_send_multichannel_request(struct hv_device *dev, int max_chans) { struct hv_vmbus_channel **subchan; struct storvsc_softc *sc; struct hv_storvsc_request *request; struct vstor_packet *vstor_packet; int request_channels_cnt = 0; int ret, i; /* get multichannels count that need to create */ request_channels_cnt = MIN(max_chans, mp_ncpus); sc = get_stor_device(dev, TRUE); if (sc == NULL) { printf("Storvsc_error: get sc failed while send mutilchannel " "request\n"); return; } request = &sc->hs_init_req; /* request the host to create multi-channel */ memset(request, 0, sizeof(struct hv_storvsc_request)); sema_init(&request->synch_sema, 0, ("stor_synch_sema")); vstor_packet = &request->vstor_packet; vstor_packet->operation = VSTOR_OPERATION_CREATE_MULTI_CHANNELS; vstor_packet->flags = REQUEST_COMPLETION_FLAG; vstor_packet->u.multi_channels_cnt = request_channels_cnt; ret = hv_vmbus_channel_send_packet( dev->channel, vstor_packet, VSTOR_PKT_SIZE, (uint64_t)(uintptr_t)request, HV_VMBUS_PACKET_TYPE_DATA_IN_BAND, HV_VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); /* wait for 5 seconds */ ret = sema_timedwait(&request->synch_sema, 5 * hz); if (ret != 0) { printf("Storvsc_error: create multi-channel timeout, %d\n", ret); return; } if (vstor_packet->operation != VSTOR_OPERATION_COMPLETEIO || vstor_packet->status != 0) { printf("Storvsc_error: create multi-channel invalid operation " "(%d) or statue (%u)\n", vstor_packet->operation, vstor_packet->status); return; } /* Wait for sub-channels setup to complete. */ subchan = vmbus_get_subchan(dev->channel, request_channels_cnt); /* Attach the sub-channels. */ for (i = 0; i < request_channels_cnt; ++i) storvsc_subchan_attach(subchan[i]); /* Release the sub-channels. */ vmbus_rel_subchan(subchan, request_channels_cnt); if (bootverbose) printf("Storvsc create multi-channel success!\n"); } /** * @brief initialize channel connection to parent partition * * @param dev a Hyper-V device pointer * @returns 0 on success, non-zero error on failure */ static int hv_storvsc_channel_init(struct hv_device *dev) { int ret = 0, i; struct hv_storvsc_request *request; struct vstor_packet *vstor_packet; struct storvsc_softc *sc; uint16_t max_chans = 0; boolean_t support_multichannel = FALSE; max_chans = 0; support_multichannel = FALSE; sc = get_stor_device(dev, TRUE); if (sc == NULL) return (ENODEV); request = &sc->hs_init_req; memset(request, 0, sizeof(struct hv_storvsc_request)); vstor_packet = &request->vstor_packet; request->softc = sc; /** * Initiate the vsc/vsp initialization protocol on the open channel */ sema_init(&request->synch_sema, 0, ("stor_synch_sema")); vstor_packet->operation = VSTOR_OPERATION_BEGININITIALIZATION; vstor_packet->flags = REQUEST_COMPLETION_FLAG; ret = hv_vmbus_channel_send_packet( dev->channel, vstor_packet, VSTOR_PKT_SIZE, (uint64_t)(uintptr_t)request, HV_VMBUS_PACKET_TYPE_DATA_IN_BAND, HV_VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret != 0) goto cleanup; /* wait 5 seconds */ ret = sema_timedwait(&request->synch_sema, 5 * hz); if (ret != 0) goto cleanup; if (vstor_packet->operation != VSTOR_OPERATION_COMPLETEIO || vstor_packet->status != 0) { goto cleanup; } for (i = 0; i < nitems(vmstor_proto_list); i++) { /* reuse the packet for version range supported */ memset(vstor_packet, 0, sizeof(struct vstor_packet)); vstor_packet->operation = VSTOR_OPERATION_QUERYPROTOCOLVERSION; vstor_packet->flags = REQUEST_COMPLETION_FLAG; vstor_packet->u.version.major_minor = vmstor_proto_list[i].proto_version; /* revision is only significant for Windows guests */ vstor_packet->u.version.revision = 0; ret = hv_vmbus_channel_send_packet( dev->channel, vstor_packet, VSTOR_PKT_SIZE, (uint64_t)(uintptr_t)request, HV_VMBUS_PACKET_TYPE_DATA_IN_BAND, HV_VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret != 0) goto cleanup; /* wait 5 seconds */ ret = sema_timedwait(&request->synch_sema, 5 * hz); if (ret) goto cleanup; if (vstor_packet->operation != VSTOR_OPERATION_COMPLETEIO) { ret = EINVAL; goto cleanup; } if (vstor_packet->status == 0) { vmstor_proto_version = vmstor_proto_list[i].proto_version; sense_buffer_size = vmstor_proto_list[i].sense_buffer_size; vmscsi_size_delta = vmstor_proto_list[i].vmscsi_size_delta; break; } } if (vstor_packet->status != 0) { ret = EINVAL; goto cleanup; } /** * Query channel properties */ memset(vstor_packet, 0, sizeof(struct vstor_packet)); vstor_packet->operation = VSTOR_OPERATION_QUERYPROPERTIES; vstor_packet->flags = REQUEST_COMPLETION_FLAG; ret = hv_vmbus_channel_send_packet( dev->channel, vstor_packet, VSTOR_PKT_SIZE, (uint64_t)(uintptr_t)request, HV_VMBUS_PACKET_TYPE_DATA_IN_BAND, HV_VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if ( ret != 0) goto cleanup; /* wait 5 seconds */ ret = sema_timedwait(&request->synch_sema, 5 * hz); if (ret != 0) goto cleanup; /* TODO: Check returned version */ if (vstor_packet->operation != VSTOR_OPERATION_COMPLETEIO || vstor_packet->status != 0) { goto cleanup; } /* multi-channels feature is supported by WIN8 and above version */ max_chans = vstor_packet->u.chan_props.max_channel_cnt; if ((hv_vmbus_protocal_version != HV_VMBUS_VERSION_WIN7) && (hv_vmbus_protocal_version != HV_VMBUS_VERSION_WS2008) && (vstor_packet->u.chan_props.flags & HV_STORAGE_SUPPORTS_MULTI_CHANNEL)) { support_multichannel = TRUE; } memset(vstor_packet, 0, sizeof(struct vstor_packet)); vstor_packet->operation = VSTOR_OPERATION_ENDINITIALIZATION; vstor_packet->flags = REQUEST_COMPLETION_FLAG; ret = hv_vmbus_channel_send_packet( dev->channel, vstor_packet, VSTOR_PKT_SIZE, (uint64_t)(uintptr_t)request, HV_VMBUS_PACKET_TYPE_DATA_IN_BAND, HV_VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret != 0) { goto cleanup; } /* wait 5 seconds */ ret = sema_timedwait(&request->synch_sema, 5 * hz); if (ret != 0) goto cleanup; if (vstor_packet->operation != VSTOR_OPERATION_COMPLETEIO || vstor_packet->status != 0) goto cleanup; /* * If multi-channel is supported, send multichannel create * request to host. */ if (support_multichannel) storvsc_send_multichannel_request(dev, max_chans); cleanup: sema_destroy(&request->synch_sema); return (ret); } /** * @brief Open channel connection to paraent partition StorVSP driver * * Open and initialize channel connection to parent partition StorVSP driver. * * @param pointer to a Hyper-V device * @returns 0 on success, non-zero error on failure */ static int hv_storvsc_connect_vsp(struct hv_device *dev) { int ret = 0; struct vmstor_chan_props props; struct storvsc_softc *sc; sc = device_get_softc(dev->device); memset(&props, 0, sizeof(struct vmstor_chan_props)); /* * Open the channel */ ret = hv_vmbus_channel_open( dev->channel, sc->hs_drv_props->drv_ringbuffer_size, sc->hs_drv_props->drv_ringbuffer_size, (void *)&props, sizeof(struct vmstor_chan_props), hv_storvsc_on_channel_callback, dev->channel); if (ret != 0) { return ret; } ret = hv_storvsc_channel_init(dev); return (ret); } #if HVS_HOST_RESET static int hv_storvsc_host_reset(struct hv_device *dev) { int ret = 0; struct storvsc_softc *sc; struct hv_storvsc_request *request; struct vstor_packet *vstor_packet; sc = get_stor_device(dev, TRUE); if (sc == NULL) { return ENODEV; } request = &sc->hs_reset_req; request->softc = sc; vstor_packet = &request->vstor_packet; sema_init(&request->synch_sema, 0, "stor synch sema"); vstor_packet->operation = VSTOR_OPERATION_RESETBUS; vstor_packet->flags = REQUEST_COMPLETION_FLAG; ret = hv_vmbus_channel_send_packet(dev->channel, vstor_packet, VSTOR_PKT_SIZE, (uint64_t)(uintptr_t)&sc->hs_reset_req, HV_VMBUS_PACKET_TYPE_DATA_IN_BAND, HV_VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); if (ret != 0) { goto cleanup; } ret = sema_timedwait(&request->synch_sema, 5 * hz); /* KYS 5 seconds */ if (ret) { goto cleanup; } /* * At this point, all outstanding requests in the adapter * should have been flushed out and return to us */ cleanup: sema_destroy(&request->synch_sema); return (ret); } #endif /* HVS_HOST_RESET */ /** * @brief Function to initiate an I/O request * * @param device Hyper-V device pointer * @param request pointer to a request structure * @returns 0 on success, non-zero error on failure */ static int hv_storvsc_io_request(struct hv_device *device, struct hv_storvsc_request *request) { struct storvsc_softc *sc; struct vstor_packet *vstor_packet = &request->vstor_packet; struct hv_vmbus_channel* outgoing_channel = NULL; int ret = 0; sc = get_stor_device(device, TRUE); if (sc == NULL) { return ENODEV; } vstor_packet->flags |= REQUEST_COMPLETION_FLAG; vstor_packet->u.vm_srb.length = VSTOR_PKT_SIZE; vstor_packet->u.vm_srb.sense_info_len = sense_buffer_size; vstor_packet->u.vm_srb.transfer_len = request->data_buf.length; vstor_packet->operation = VSTOR_OPERATION_EXECUTESRB; outgoing_channel = vmbus_select_outgoing_channel(device->channel); mtx_unlock(&request->softc->hs_lock); if (request->data_buf.length) { ret = hv_vmbus_channel_send_packet_multipagebuffer( outgoing_channel, &request->data_buf, vstor_packet, VSTOR_PKT_SIZE, (uint64_t)(uintptr_t)request); } else { ret = hv_vmbus_channel_send_packet( outgoing_channel, vstor_packet, VSTOR_PKT_SIZE, (uint64_t)(uintptr_t)request, HV_VMBUS_PACKET_TYPE_DATA_IN_BAND, HV_VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED); } mtx_lock(&request->softc->hs_lock); if (ret != 0) { printf("Unable to send packet %p ret %d", vstor_packet, ret); } else { atomic_add_int(&sc->hs_num_out_reqs, 1); } return (ret); } /** * Process IO_COMPLETION_OPERATION and ready * the result to be completed for upper layer * processing by the CAM layer. */ static void hv_storvsc_on_iocompletion(struct storvsc_softc *sc, struct vstor_packet *vstor_packet, struct hv_storvsc_request *request) { struct vmscsi_req *vm_srb; vm_srb = &vstor_packet->u.vm_srb; + /* + * Copy some fields of the host's response into the request structure, + * because the fields will be used later in storvsc_io_done(). + */ + request->vstor_packet.u.vm_srb.scsi_status = vm_srb->scsi_status; + request->vstor_packet.u.vm_srb.transfer_len = vm_srb->transfer_len; + if (((vm_srb->scsi_status & 0xFF) == SCSI_STATUS_CHECK_COND) && (vm_srb->srb_status & SRB_STATUS_AUTOSENSE_VALID)) { /* Autosense data available */ KASSERT(vm_srb->sense_info_len <= request->sense_info_len, ("vm_srb->sense_info_len <= " "request->sense_info_len")); memcpy(request->sense_data, vm_srb->u.sense_data, vm_srb->sense_info_len); request->sense_info_len = vm_srb->sense_info_len; } /* Complete request by passing to the CAM layer */ storvsc_io_done(request); atomic_subtract_int(&sc->hs_num_out_reqs, 1); if (sc->hs_drain_notify && (sc->hs_num_out_reqs == 0)) { sema_post(&sc->hs_drain_sema); } } static void hv_storvsc_rescan_target(struct storvsc_softc *sc) { path_id_t pathid; target_id_t targetid; union ccb *ccb; pathid = cam_sim_path(sc->hs_sim); targetid = CAM_TARGET_WILDCARD; /* * Allocate a CCB and schedule a rescan. */ ccb = xpt_alloc_ccb_nowait(); if (ccb == NULL) { printf("unable to alloc CCB for rescan\n"); return; } if (xpt_create_path(&ccb->ccb_h.path, NULL, pathid, targetid, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { printf("unable to create path for rescan, pathid: %u," "targetid: %u\n", pathid, targetid); xpt_free_ccb(ccb); return; } if (targetid == CAM_TARGET_WILDCARD) ccb->ccb_h.func_code = XPT_SCAN_BUS; else ccb->ccb_h.func_code = XPT_SCAN_TGT; xpt_rescan(ccb); } static void hv_storvsc_on_channel_callback(void *context) { int ret = 0; hv_vmbus_channel *channel = (hv_vmbus_channel *)context; struct hv_device *device = NULL; struct storvsc_softc *sc; uint32_t bytes_recvd; uint64_t request_id; uint8_t packet[roundup2(sizeof(struct vstor_packet), 8)]; struct hv_storvsc_request *request; struct vstor_packet *vstor_packet; device = channel->device; KASSERT(device, ("device is NULL")); sc = get_stor_device(device, FALSE); if (sc == NULL) { printf("Storvsc_error: get stor device failed.\n"); return; } ret = hv_vmbus_channel_recv_packet( channel, packet, roundup2(VSTOR_PKT_SIZE, 8), &bytes_recvd, &request_id); while ((ret == 0) && (bytes_recvd > 0)) { request = (struct hv_storvsc_request *)(uintptr_t)request_id; if ((request == &sc->hs_init_req) || (request == &sc->hs_reset_req)) { memcpy(&request->vstor_packet, packet, sizeof(struct vstor_packet)); sema_post(&request->synch_sema); } else { vstor_packet = (struct vstor_packet *)packet; switch(vstor_packet->operation) { case VSTOR_OPERATION_COMPLETEIO: if (request == NULL) panic("VMBUS: storvsc received a " "packet with NULL request id in " "COMPLETEIO operation."); hv_storvsc_on_iocompletion(sc, vstor_packet, request); break; case VSTOR_OPERATION_REMOVEDEVICE: printf("VMBUS: storvsc operation %d not " "implemented.\n", vstor_packet->operation); /* TODO: implement */ break; case VSTOR_OPERATION_ENUMERATE_BUS: hv_storvsc_rescan_target(sc); break; default: break; } } ret = hv_vmbus_channel_recv_packet( channel, packet, roundup2(VSTOR_PKT_SIZE, 8), &bytes_recvd, &request_id); } } /** * @brief StorVSC probe function * * Device probe function. Returns 0 if the input device is a StorVSC * device. Otherwise, a ENXIO is returned. If the input device is * for BlkVSC (paravirtual IDE) device and this support is disabled in * favor of the emulated ATA/IDE device, return ENXIO. * * @param a device * @returns 0 on success, ENXIO if not a matcing StorVSC device */ static int storvsc_probe(device_t dev) { int ata_disk_enable = 0; int ret = ENXIO; switch (storvsc_get_storage_type(dev)) { case DRIVER_BLKVSC: if(bootverbose) device_printf(dev, "DRIVER_BLKVSC-Emulated ATA/IDE probe\n"); if (!getenv_int("hw.ata.disk_enable", &ata_disk_enable)) { if(bootverbose) device_printf(dev, "Enlightened ATA/IDE detected\n"); device_set_desc(dev, g_drv_props_table[DRIVER_BLKVSC].drv_desc); ret = BUS_PROBE_DEFAULT; } else if(bootverbose) device_printf(dev, "Emulated ATA/IDE set (hw.ata.disk_enable set)\n"); break; case DRIVER_STORVSC: if(bootverbose) device_printf(dev, "Enlightened SCSI device detected\n"); device_set_desc(dev, g_drv_props_table[DRIVER_STORVSC].drv_desc); ret = BUS_PROBE_DEFAULT; break; default: ret = ENXIO; } return (ret); } /** * @brief StorVSC attach function * * Function responsible for allocating per-device structures, * setting up CAM interfaces and scanning for available LUNs to * be used for SCSI device peripherals. * * @param a device * @returns 0 on success or an error on failure */ static int storvsc_attach(device_t dev) { struct hv_device *hv_dev = vmbus_get_devctx(dev); enum hv_storage_type stor_type; struct storvsc_softc *sc; struct cam_devq *devq; int ret, i, j; struct hv_storvsc_request *reqp; struct root_hold_token *root_mount_token = NULL; struct hv_sgl_node *sgl_node = NULL; void *tmp_buff = NULL; /* * We need to serialize storvsc attach calls. */ root_mount_token = root_mount_hold("storvsc"); sc = device_get_softc(dev); stor_type = storvsc_get_storage_type(dev); if (stor_type == DRIVER_UNKNOWN) { ret = ENODEV; goto cleanup; } /* fill in driver specific properties */ sc->hs_drv_props = &g_drv_props_table[stor_type]; /* fill in device specific properties */ sc->hs_unit = device_get_unit(dev); sc->hs_dev = hv_dev; LIST_INIT(&sc->hs_free_list); mtx_init(&sc->hs_lock, "hvslck", NULL, MTX_DEF); for (i = 0; i < sc->hs_drv_props->drv_max_ios_per_target; ++i) { reqp = malloc(sizeof(struct hv_storvsc_request), M_DEVBUF, M_WAITOK|M_ZERO); reqp->softc = sc; LIST_INSERT_HEAD(&sc->hs_free_list, reqp, link); } /* create sg-list page pool */ if (FALSE == g_hv_sgl_page_pool.is_init) { g_hv_sgl_page_pool.is_init = TRUE; LIST_INIT(&g_hv_sgl_page_pool.in_use_sgl_list); LIST_INIT(&g_hv_sgl_page_pool.free_sgl_list); /* * Pre-create SG list, each SG list with * HV_MAX_MULTIPAGE_BUFFER_COUNT segments, each * segment has one page buffer */ for (i = 0; i < STORVSC_MAX_IO_REQUESTS; i++) { sgl_node = malloc(sizeof(struct hv_sgl_node), M_DEVBUF, M_WAITOK|M_ZERO); sgl_node->sgl_data = sglist_alloc(HV_MAX_MULTIPAGE_BUFFER_COUNT, M_WAITOK|M_ZERO); for (j = 0; j < HV_MAX_MULTIPAGE_BUFFER_COUNT; j++) { tmp_buff = malloc(PAGE_SIZE, M_DEVBUF, M_WAITOK|M_ZERO); sgl_node->sgl_data->sg_segs[j].ss_paddr = (vm_paddr_t)tmp_buff; } LIST_INSERT_HEAD(&g_hv_sgl_page_pool.free_sgl_list, sgl_node, link); } } sc->hs_destroy = FALSE; sc->hs_drain_notify = FALSE; sema_init(&sc->hs_drain_sema, 0, "Store Drain Sema"); ret = hv_storvsc_connect_vsp(hv_dev); if (ret != 0) { goto cleanup; } /* * Create the device queue. * Hyper-V maps each target to one SCSI HBA */ devq = cam_simq_alloc(sc->hs_drv_props->drv_max_ios_per_target); if (devq == NULL) { device_printf(dev, "Failed to alloc device queue\n"); ret = ENOMEM; goto cleanup; } sc->hs_sim = cam_sim_alloc(storvsc_action, storvsc_poll, sc->hs_drv_props->drv_name, sc, sc->hs_unit, &sc->hs_lock, 1, sc->hs_drv_props->drv_max_ios_per_target, devq); if (sc->hs_sim == NULL) { device_printf(dev, "Failed to alloc sim\n"); cam_simq_free(devq); ret = ENOMEM; goto cleanup; } mtx_lock(&sc->hs_lock); /* bus_id is set to 0, need to get it from VMBUS channel query? */ if (xpt_bus_register(sc->hs_sim, dev, 0) != CAM_SUCCESS) { cam_sim_free(sc->hs_sim, /*free_devq*/TRUE); mtx_unlock(&sc->hs_lock); device_printf(dev, "Unable to register SCSI bus\n"); ret = ENXIO; goto cleanup; } if (xpt_create_path(&sc->hs_path, /*periph*/NULL, cam_sim_path(sc->hs_sim), CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) { xpt_bus_deregister(cam_sim_path(sc->hs_sim)); cam_sim_free(sc->hs_sim, /*free_devq*/TRUE); mtx_unlock(&sc->hs_lock); device_printf(dev, "Unable to create path\n"); ret = ENXIO; goto cleanup; } mtx_unlock(&sc->hs_lock); root_mount_rel(root_mount_token); return (0); cleanup: root_mount_rel(root_mount_token); while (!LIST_EMPTY(&sc->hs_free_list)) { reqp = LIST_FIRST(&sc->hs_free_list); LIST_REMOVE(reqp, link); free(reqp, M_DEVBUF); } while (!LIST_EMPTY(&g_hv_sgl_page_pool.free_sgl_list)) { sgl_node = LIST_FIRST(&g_hv_sgl_page_pool.free_sgl_list); LIST_REMOVE(sgl_node, link); for (j = 0; j < HV_MAX_MULTIPAGE_BUFFER_COUNT; j++) { if (NULL != (void*)sgl_node->sgl_data->sg_segs[j].ss_paddr) { free((void*)sgl_node->sgl_data->sg_segs[j].ss_paddr, M_DEVBUF); } } sglist_free(sgl_node->sgl_data); free(sgl_node, M_DEVBUF); } return (ret); } /** * @brief StorVSC device detach function * * This function is responsible for safely detaching a * StorVSC device. This includes waiting for inbound responses * to complete and freeing associated per-device structures. * * @param dev a device * returns 0 on success */ static int storvsc_detach(device_t dev) { struct storvsc_softc *sc = device_get_softc(dev); struct hv_storvsc_request *reqp = NULL; struct hv_device *hv_device = vmbus_get_devctx(dev); struct hv_sgl_node *sgl_node = NULL; int j = 0; sc->hs_destroy = TRUE; /* * At this point, all outbound traffic should be disabled. We * only allow inbound traffic (responses) to proceed so that * outstanding requests can be completed. */ sc->hs_drain_notify = TRUE; sema_wait(&sc->hs_drain_sema); sc->hs_drain_notify = FALSE; /* * Since we have already drained, we don't need to busy wait. * The call to close the channel will reset the callback * under the protection of the incoming channel lock. */ hv_vmbus_channel_close(hv_device->channel); mtx_lock(&sc->hs_lock); while (!LIST_EMPTY(&sc->hs_free_list)) { reqp = LIST_FIRST(&sc->hs_free_list); LIST_REMOVE(reqp, link); free(reqp, M_DEVBUF); } mtx_unlock(&sc->hs_lock); while (!LIST_EMPTY(&g_hv_sgl_page_pool.free_sgl_list)) { sgl_node = LIST_FIRST(&g_hv_sgl_page_pool.free_sgl_list); LIST_REMOVE(sgl_node, link); for (j = 0; j < HV_MAX_MULTIPAGE_BUFFER_COUNT; j++){ if (NULL != (void*)sgl_node->sgl_data->sg_segs[j].ss_paddr) { free((void*)sgl_node->sgl_data->sg_segs[j].ss_paddr, M_DEVBUF); } } sglist_free(sgl_node->sgl_data); free(sgl_node, M_DEVBUF); } return (0); } #if HVS_TIMEOUT_TEST /** * @brief unit test for timed out operations * * This function provides unit testing capability to simulate * timed out operations. Recompilation with HV_TIMEOUT_TEST=1 * is required. * * @param reqp pointer to a request structure * @param opcode SCSI operation being performed * @param wait if 1, wait for I/O to complete */ static void storvsc_timeout_test(struct hv_storvsc_request *reqp, uint8_t opcode, int wait) { int ret; union ccb *ccb = reqp->ccb; struct storvsc_softc *sc = reqp->softc; if (reqp->vstor_packet.vm_srb.cdb[0] != opcode) { return; } if (wait) { mtx_lock(&reqp->event.mtx); } ret = hv_storvsc_io_request(sc->hs_dev, reqp); if (ret != 0) { if (wait) { mtx_unlock(&reqp->event.mtx); } printf("%s: io_request failed with %d.\n", __func__, ret); ccb->ccb_h.status = CAM_PROVIDE_FAIL; mtx_lock(&sc->hs_lock); storvsc_free_request(sc, reqp); xpt_done(ccb); mtx_unlock(&sc->hs_lock); return; } if (wait) { xpt_print(ccb->ccb_h.path, "%u: %s: waiting for IO return.\n", ticks, __func__); ret = cv_timedwait(&reqp->event.cv, &reqp->event.mtx, 60*hz); mtx_unlock(&reqp->event.mtx); xpt_print(ccb->ccb_h.path, "%u: %s: %s.\n", ticks, __func__, (ret == 0)? "IO return detected" : "IO return not detected"); /* * Now both the timer handler and io done are running * simultaneously. We want to confirm the io done always * finishes after the timer handler exits. So reqp used by * timer handler is not freed or stale. Do busy loop for * another 1/10 second to make sure io done does * wait for the timer handler to complete. */ DELAY(100*1000); mtx_lock(&sc->hs_lock); xpt_print(ccb->ccb_h.path, "%u: %s: finishing, queue frozen %d, " "ccb status 0x%x scsi_status 0x%x.\n", ticks, __func__, sc->hs_frozen, ccb->ccb_h.status, ccb->csio.scsi_status); mtx_unlock(&sc->hs_lock); } } #endif /* HVS_TIMEOUT_TEST */ #ifdef notyet /** * @brief timeout handler for requests * * This function is called as a result of a callout expiring. * * @param arg pointer to a request */ static void storvsc_timeout(void *arg) { struct hv_storvsc_request *reqp = arg; struct storvsc_softc *sc = reqp->softc; union ccb *ccb = reqp->ccb; if (reqp->retries == 0) { mtx_lock(&sc->hs_lock); xpt_print(ccb->ccb_h.path, "%u: IO timed out (req=0x%p), wait for another %u secs.\n", ticks, reqp, ccb->ccb_h.timeout / 1000); cam_error_print(ccb, CAM_ESF_ALL, CAM_EPF_ALL); mtx_unlock(&sc->hs_lock); reqp->retries++; callout_reset_sbt(&reqp->callout, SBT_1MS * ccb->ccb_h.timeout, 0, storvsc_timeout, reqp, 0); #if HVS_TIMEOUT_TEST storvsc_timeout_test(reqp, SEND_DIAGNOSTIC, 0); #endif return; } mtx_lock(&sc->hs_lock); xpt_print(ccb->ccb_h.path, "%u: IO (reqp = 0x%p) did not return for %u seconds, %s.\n", ticks, reqp, ccb->ccb_h.timeout * (reqp->retries+1) / 1000, (sc->hs_frozen == 0)? "freezing the queue" : "the queue is already frozen"); if (sc->hs_frozen == 0) { sc->hs_frozen = 1; xpt_freeze_simq(xpt_path_sim(ccb->ccb_h.path), 1); } mtx_unlock(&sc->hs_lock); #if HVS_TIMEOUT_TEST storvsc_timeout_test(reqp, MODE_SELECT_10, 1); #endif } #endif /** * @brief StorVSC device poll function * * This function is responsible for servicing requests when * interrupts are disabled (i.e when we are dumping core.) * * @param sim a pointer to a CAM SCSI interface module */ static void storvsc_poll(struct cam_sim *sim) { struct storvsc_softc *sc = cam_sim_softc(sim); mtx_assert(&sc->hs_lock, MA_OWNED); mtx_unlock(&sc->hs_lock); hv_storvsc_on_channel_callback(sc->hs_dev->channel); mtx_lock(&sc->hs_lock); } /** * @brief StorVSC device action function * * This function is responsible for handling SCSI operations which * are passed from the CAM layer. The requests are in the form of * CAM control blocks which indicate the action being performed. * Not all actions require converting the request to a VSCSI protocol * message - these actions can be responded to by this driver. * Requests which are destined for a backend storage device are converted * to a VSCSI protocol message and sent on the channel connection associated * with this device. * * @param sim pointer to a CAM SCSI interface module * @param ccb pointer to a CAM control block */ static void storvsc_action(struct cam_sim *sim, union ccb *ccb) { struct storvsc_softc *sc = cam_sim_softc(sim); int res; mtx_assert(&sc->hs_lock, MA_OWNED); switch (ccb->ccb_h.func_code) { case XPT_PATH_INQ: { struct ccb_pathinq *cpi = &ccb->cpi; cpi->version_num = 1; cpi->hba_inquiry = PI_TAG_ABLE|PI_SDTR_ABLE; cpi->target_sprt = 0; cpi->hba_misc = PIM_NOBUSRESET; cpi->hba_eng_cnt = 0; cpi->max_target = STORVSC_MAX_TARGETS; cpi->max_lun = sc->hs_drv_props->drv_max_luns_per_target; cpi->initiator_id = cpi->max_target; cpi->bus_id = cam_sim_bus(sim); cpi->base_transfer_speed = 300000; cpi->transport = XPORT_SAS; cpi->transport_version = 0; cpi->protocol = PROTO_SCSI; cpi->protocol_version = SCSI_REV_SPC2; strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); strncpy(cpi->hba_vid, sc->hs_drv_props->drv_name, HBA_IDLEN); strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); cpi->unit_number = cam_sim_unit(sim); ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); return; } case XPT_GET_TRAN_SETTINGS: { struct ccb_trans_settings *cts = &ccb->cts; cts->transport = XPORT_SAS; cts->transport_version = 0; cts->protocol = PROTO_SCSI; cts->protocol_version = SCSI_REV_SPC2; /* enable tag queuing and disconnected mode */ cts->proto_specific.valid = CTS_SCSI_VALID_TQ; cts->proto_specific.scsi.valid = CTS_SCSI_VALID_TQ; cts->proto_specific.scsi.flags = CTS_SCSI_FLAGS_TAG_ENB; cts->xport_specific.valid = CTS_SPI_VALID_DISC; cts->xport_specific.spi.flags = CTS_SPI_FLAGS_DISC_ENB; ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); return; } case XPT_SET_TRAN_SETTINGS: { ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); return; } case XPT_CALC_GEOMETRY:{ cam_calc_geometry(&ccb->ccg, 1); xpt_done(ccb); return; } case XPT_RESET_BUS: case XPT_RESET_DEV:{ #if HVS_HOST_RESET if ((res = hv_storvsc_host_reset(sc->hs_dev)) != 0) { xpt_print(ccb->ccb_h.path, "hv_storvsc_host_reset failed with %d\n", res); ccb->ccb_h.status = CAM_PROVIDE_FAIL; xpt_done(ccb); return; } ccb->ccb_h.status = CAM_REQ_CMP; xpt_done(ccb); return; #else xpt_print(ccb->ccb_h.path, "%s reset not supported.\n", (ccb->ccb_h.func_code == XPT_RESET_BUS)? "bus" : "dev"); ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); return; #endif /* HVS_HOST_RESET */ } case XPT_SCSI_IO: case XPT_IMMED_NOTIFY: { struct hv_storvsc_request *reqp = NULL; if (ccb->csio.cdb_len == 0) { panic("cdl_len is 0\n"); } if (LIST_EMPTY(&sc->hs_free_list)) { ccb->ccb_h.status = CAM_REQUEUE_REQ; if (sc->hs_frozen == 0) { sc->hs_frozen = 1; xpt_freeze_simq(sim, /* count*/1); } xpt_done(ccb); return; } reqp = LIST_FIRST(&sc->hs_free_list); LIST_REMOVE(reqp, link); bzero(reqp, sizeof(struct hv_storvsc_request)); reqp->softc = sc; ccb->ccb_h.status |= CAM_SIM_QUEUED; if ((res = create_storvsc_request(ccb, reqp)) != 0) { ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); return; } #ifdef notyet if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) { callout_init(&reqp->callout, 1); callout_reset_sbt(&reqp->callout, SBT_1MS * ccb->ccb_h.timeout, 0, storvsc_timeout, reqp, 0); #if HVS_TIMEOUT_TEST cv_init(&reqp->event.cv, "storvsc timeout cv"); mtx_init(&reqp->event.mtx, "storvsc timeout mutex", NULL, MTX_DEF); switch (reqp->vstor_packet.vm_srb.cdb[0]) { case MODE_SELECT_10: case SEND_DIAGNOSTIC: /* To have timer send the request. */ return; default: break; } #endif /* HVS_TIMEOUT_TEST */ } #endif if ((res = hv_storvsc_io_request(sc->hs_dev, reqp)) != 0) { xpt_print(ccb->ccb_h.path, "hv_storvsc_io_request failed with %d\n", res); ccb->ccb_h.status = CAM_PROVIDE_FAIL; storvsc_free_request(sc, reqp); xpt_done(ccb); return; } return; } default: ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); return; } } /** * @brief destroy bounce buffer * * This function is responsible for destroy a Scatter/Gather list * that create by storvsc_create_bounce_buffer() * * @param sgl- the Scatter/Gather need be destroy * @param sg_count- page count of the SG list. * */ static void storvsc_destroy_bounce_buffer(struct sglist *sgl) { struct hv_sgl_node *sgl_node = NULL; if (LIST_EMPTY(&g_hv_sgl_page_pool.in_use_sgl_list)) { printf("storvsc error: not enough in use sgl\n"); return; } sgl_node = LIST_FIRST(&g_hv_sgl_page_pool.in_use_sgl_list); LIST_REMOVE(sgl_node, link); sgl_node->sgl_data = sgl; LIST_INSERT_HEAD(&g_hv_sgl_page_pool.free_sgl_list, sgl_node, link); } /** * @brief create bounce buffer * * This function is responsible for create a Scatter/Gather list, * which hold several pages that can be aligned with page size. * * @param seg_count- SG-list segments count * @param write - if WRITE_TYPE, set SG list page used size to 0, * otherwise set used size to page size. * * return NULL if create failed */ static struct sglist * storvsc_create_bounce_buffer(uint16_t seg_count, int write) { int i = 0; struct sglist *bounce_sgl = NULL; unsigned int buf_len = ((write == WRITE_TYPE) ? 0 : PAGE_SIZE); struct hv_sgl_node *sgl_node = NULL; /* get struct sglist from free_sgl_list */ if (LIST_EMPTY(&g_hv_sgl_page_pool.free_sgl_list)) { printf("storvsc error: not enough free sgl\n"); return NULL; } sgl_node = LIST_FIRST(&g_hv_sgl_page_pool.free_sgl_list); LIST_REMOVE(sgl_node, link); bounce_sgl = sgl_node->sgl_data; LIST_INSERT_HEAD(&g_hv_sgl_page_pool.in_use_sgl_list, sgl_node, link); bounce_sgl->sg_maxseg = seg_count; if (write == WRITE_TYPE) bounce_sgl->sg_nseg = 0; else bounce_sgl->sg_nseg = seg_count; for (i = 0; i < seg_count; i++) bounce_sgl->sg_segs[i].ss_len = buf_len; return bounce_sgl; } /** * @brief copy data from SG list to bounce buffer * * This function is responsible for copy data from one SG list's segments * to another SG list which used as bounce buffer. * * @param bounce_sgl - the destination SG list * @param orig_sgl - the segment of the source SG list. * @param orig_sgl_count - the count of segments. * @param orig_sgl_count - indicate which segment need bounce buffer, * set 1 means need. * */ static void storvsc_copy_sgl_to_bounce_buf(struct sglist *bounce_sgl, bus_dma_segment_t *orig_sgl, unsigned int orig_sgl_count, uint64_t seg_bits) { int src_sgl_idx = 0; for (src_sgl_idx = 0; src_sgl_idx < orig_sgl_count; src_sgl_idx++) { if (seg_bits & (1 << src_sgl_idx)) { memcpy((void*)bounce_sgl->sg_segs[src_sgl_idx].ss_paddr, (void*)orig_sgl[src_sgl_idx].ds_addr, orig_sgl[src_sgl_idx].ds_len); bounce_sgl->sg_segs[src_sgl_idx].ss_len = orig_sgl[src_sgl_idx].ds_len; } } } /** * @brief copy data from SG list which used as bounce to another SG list * * This function is responsible for copy data from one SG list with bounce * buffer to another SG list's segments. * * @param dest_sgl - the destination SG list's segments * @param dest_sgl_count - the count of destination SG list's segment. * @param src_sgl - the source SG list. * @param seg_bits - indicate which segment used bounce buffer of src SG-list. * */ void storvsc_copy_from_bounce_buf_to_sgl(bus_dma_segment_t *dest_sgl, unsigned int dest_sgl_count, struct sglist* src_sgl, uint64_t seg_bits) { int sgl_idx = 0; for (sgl_idx = 0; sgl_idx < dest_sgl_count; sgl_idx++) { if (seg_bits & (1 << sgl_idx)) { memcpy((void*)(dest_sgl[sgl_idx].ds_addr), (void*)(src_sgl->sg_segs[sgl_idx].ss_paddr), src_sgl->sg_segs[sgl_idx].ss_len); } } } /** * @brief check SG list with bounce buffer or not * * This function is responsible for check if need bounce buffer for SG list. * * @param sgl - the SG list's segments * @param sg_count - the count of SG list's segment. * @param bits - segmengs number that need bounce buffer * * return -1 if SG list needless bounce buffer */ static int storvsc_check_bounce_buffer_sgl(bus_dma_segment_t *sgl, unsigned int sg_count, uint64_t *bits) { int i = 0; int offset = 0; uint64_t phys_addr = 0; uint64_t tmp_bits = 0; boolean_t found_hole = FALSE; boolean_t pre_aligned = TRUE; if (sg_count < 2){ return -1; } *bits = 0; phys_addr = vtophys(sgl[0].ds_addr); offset = phys_addr - trunc_page(phys_addr); if (offset != 0) { pre_aligned = FALSE; tmp_bits |= 1; } for (i = 1; i < sg_count; i++) { phys_addr = vtophys(sgl[i].ds_addr); offset = phys_addr - trunc_page(phys_addr); if (offset == 0) { if (FALSE == pre_aligned){ /* * This segment is aligned, if the previous * one is not aligned, find a hole */ found_hole = TRUE; } pre_aligned = TRUE; } else { tmp_bits |= 1 << i; if (!pre_aligned) { if (phys_addr != vtophys(sgl[i-1].ds_addr + sgl[i-1].ds_len)) { /* * Check whether connect to previous * segment,if not, find the hole */ found_hole = TRUE; } } else { found_hole = TRUE; } pre_aligned = FALSE; } } if (!found_hole) { return (-1); } else { *bits = tmp_bits; return 0; } } /** * @brief Fill in a request structure based on a CAM control block * * Fills in a request structure based on the contents of a CAM control * block. The request structure holds the payload information for * VSCSI protocol request. * * @param ccb pointer to a CAM contorl block * @param reqp pointer to a request structure */ static int create_storvsc_request(union ccb *ccb, struct hv_storvsc_request *reqp) { struct ccb_scsiio *csio = &ccb->csio; uint64_t phys_addr; uint32_t bytes_to_copy = 0; uint32_t pfn_num = 0; uint32_t pfn; uint64_t not_aligned_seg_bits = 0; /* refer to struct vmscsi_req for meanings of these two fields */ reqp->vstor_packet.u.vm_srb.port = cam_sim_unit(xpt_path_sim(ccb->ccb_h.path)); reqp->vstor_packet.u.vm_srb.path_id = cam_sim_bus(xpt_path_sim(ccb->ccb_h.path)); reqp->vstor_packet.u.vm_srb.target_id = ccb->ccb_h.target_id; reqp->vstor_packet.u.vm_srb.lun = ccb->ccb_h.target_lun; reqp->vstor_packet.u.vm_srb.cdb_len = csio->cdb_len; if(ccb->ccb_h.flags & CAM_CDB_POINTER) { memcpy(&reqp->vstor_packet.u.vm_srb.u.cdb, csio->cdb_io.cdb_ptr, csio->cdb_len); } else { memcpy(&reqp->vstor_packet.u.vm_srb.u.cdb, csio->cdb_io.cdb_bytes, csio->cdb_len); } switch (ccb->ccb_h.flags & CAM_DIR_MASK) { case CAM_DIR_OUT: reqp->vstor_packet.u.vm_srb.data_in = WRITE_TYPE; break; case CAM_DIR_IN: reqp->vstor_packet.u.vm_srb.data_in = READ_TYPE; break; case CAM_DIR_NONE: reqp->vstor_packet.u.vm_srb.data_in = UNKNOWN_TYPE; break; default: reqp->vstor_packet.u.vm_srb.data_in = UNKNOWN_TYPE; break; } reqp->sense_data = &csio->sense_data; reqp->sense_info_len = csio->sense_len; reqp->ccb = ccb; if (0 == csio->dxfer_len) { return (0); } reqp->data_buf.length = csio->dxfer_len; switch (ccb->ccb_h.flags & CAM_DATA_MASK) { case CAM_DATA_VADDR: { bytes_to_copy = csio->dxfer_len; phys_addr = vtophys(csio->data_ptr); reqp->data_buf.offset = phys_addr & PAGE_MASK; while (bytes_to_copy != 0) { int bytes, page_offset; phys_addr = vtophys(&csio->data_ptr[reqp->data_buf.length - bytes_to_copy]); pfn = phys_addr >> PAGE_SHIFT; reqp->data_buf.pfn_array[pfn_num] = pfn; page_offset = phys_addr & PAGE_MASK; bytes = min(PAGE_SIZE - page_offset, bytes_to_copy); bytes_to_copy -= bytes; pfn_num++; } break; } case CAM_DATA_SG: { int i = 0; int offset = 0; int ret; bus_dma_segment_t *storvsc_sglist = (bus_dma_segment_t *)ccb->csio.data_ptr; u_int16_t storvsc_sg_count = ccb->csio.sglist_cnt; printf("Storvsc: get SG I/O operation, %d\n", reqp->vstor_packet.u.vm_srb.data_in); if (storvsc_sg_count > HV_MAX_MULTIPAGE_BUFFER_COUNT){ printf("Storvsc: %d segments is too much, " "only support %d segments\n", storvsc_sg_count, HV_MAX_MULTIPAGE_BUFFER_COUNT); return (EINVAL); } /* * We create our own bounce buffer function currently. Idealy * we should use BUS_DMA(9) framework. But with current BUS_DMA * code there is no callback API to check the page alignment of * middle segments before busdma can decide if a bounce buffer * is needed for particular segment. There is callback, * "bus_dma_filter_t *filter", but the parrameters are not * sufficient for storvsc driver. * TODO: * Add page alignment check in BUS_DMA(9) callback. Once * this is complete, switch the following code to use * BUS_DMA(9) for storvsc bounce buffer support. */ /* check if we need to create bounce buffer */ ret = storvsc_check_bounce_buffer_sgl(storvsc_sglist, storvsc_sg_count, ¬_aligned_seg_bits); if (ret != -1) { reqp->bounce_sgl = storvsc_create_bounce_buffer(storvsc_sg_count, reqp->vstor_packet.u.vm_srb.data_in); if (NULL == reqp->bounce_sgl) { printf("Storvsc_error: " "create bounce buffer failed.\n"); return (ENOMEM); } reqp->bounce_sgl_count = storvsc_sg_count; reqp->not_aligned_seg_bits = not_aligned_seg_bits; /* * if it is write, we need copy the original data *to bounce buffer */ if (WRITE_TYPE == reqp->vstor_packet.u.vm_srb.data_in) { storvsc_copy_sgl_to_bounce_buf( reqp->bounce_sgl, storvsc_sglist, storvsc_sg_count, reqp->not_aligned_seg_bits); } /* transfer virtual address to physical frame number */ if (reqp->not_aligned_seg_bits & 0x1){ phys_addr = vtophys(reqp->bounce_sgl->sg_segs[0].ss_paddr); }else{ phys_addr = vtophys(storvsc_sglist[0].ds_addr); } reqp->data_buf.offset = phys_addr & PAGE_MASK; pfn = phys_addr >> PAGE_SHIFT; reqp->data_buf.pfn_array[0] = pfn; for (i = 1; i < storvsc_sg_count; i++) { if (reqp->not_aligned_seg_bits & (1 << i)) { phys_addr = vtophys(reqp->bounce_sgl->sg_segs[i].ss_paddr); } else { phys_addr = vtophys(storvsc_sglist[i].ds_addr); } pfn = phys_addr >> PAGE_SHIFT; reqp->data_buf.pfn_array[i] = pfn; } } else { phys_addr = vtophys(storvsc_sglist[0].ds_addr); reqp->data_buf.offset = phys_addr & PAGE_MASK; for (i = 0; i < storvsc_sg_count; i++) { phys_addr = vtophys(storvsc_sglist[i].ds_addr); pfn = phys_addr >> PAGE_SHIFT; reqp->data_buf.pfn_array[i] = pfn; } /* check the last segment cross boundary or not */ offset = phys_addr & PAGE_MASK; if (offset) { phys_addr = vtophys(storvsc_sglist[i-1].ds_addr + PAGE_SIZE - offset); pfn = phys_addr >> PAGE_SHIFT; reqp->data_buf.pfn_array[i] = pfn; } reqp->bounce_sgl_count = 0; } break; } default: printf("Unknow flags: %d\n", ccb->ccb_h.flags); return(EINVAL); } return(0); } /* - * Modified based on scsi_print_inquiry which is responsible to - * print the detail information for scsi_inquiry_data. - * + * SCSI Inquiry checks qualifier and type. + * If qualifier is 011b, means the device server is not capable + * of supporting a peripheral device on this logical unit, and + * the type should be set to 1Fh. + * * Return 1 if it is valid, 0 otherwise. */ static inline int is_inquiry_valid(const struct scsi_inquiry_data *inq_data) { uint8_t type; - char vendor[16], product[48], revision[16]; - - /* - * Check device type and qualifier - */ - if (!(SID_QUAL_IS_VENDOR_UNIQUE(inq_data) || - SID_QUAL(inq_data) == SID_QUAL_LU_CONNECTED)) + if (SID_QUAL(inq_data) != SID_QUAL_LU_CONNECTED) { return (0); - + } type = SID_TYPE(inq_data); - switch (type) { - case T_DIRECT: - case T_SEQUENTIAL: - case T_PRINTER: - case T_PROCESSOR: - case T_WORM: - case T_CDROM: - case T_SCANNER: - case T_OPTICAL: - case T_CHANGER: - case T_COMM: - case T_STORARRAY: - case T_ENCLOSURE: - case T_RBC: - case T_OCRW: - case T_OSD: - case T_ADC: - break; - case T_NODEVICE: - default: + if (type == T_NODEVICE) { return (0); } - - /* - * Check vendor, product, and revision - */ - cam_strvis(vendor, inq_data->vendor, sizeof(inq_data->vendor), - sizeof(vendor)); - cam_strvis(product, inq_data->product, sizeof(inq_data->product), - sizeof(product)); - cam_strvis(revision, inq_data->revision, sizeof(inq_data->revision), - sizeof(revision)); - if (strlen(vendor) == 0 || - strlen(product) == 0 || - strlen(revision) == 0) - return (0); - return (1); } /** * @brief completion function before returning to CAM * * I/O process has been completed and the result needs * to be passed to the CAM layer. * Free resources related to this request. * * @param reqp pointer to a request structure */ static void storvsc_io_done(struct hv_storvsc_request *reqp) { union ccb *ccb = reqp->ccb; struct ccb_scsiio *csio = &ccb->csio; struct storvsc_softc *sc = reqp->softc; struct vmscsi_req *vm_srb = &reqp->vstor_packet.u.vm_srb; bus_dma_segment_t *ori_sglist = NULL; int ori_sg_count = 0; /* destroy bounce buffer if it is used */ if (reqp->bounce_sgl_count) { ori_sglist = (bus_dma_segment_t *)ccb->csio.data_ptr; ori_sg_count = ccb->csio.sglist_cnt; /* * If it is READ operation, we should copy back the data * to original SG list. */ if (READ_TYPE == reqp->vstor_packet.u.vm_srb.data_in) { storvsc_copy_from_bounce_buf_to_sgl(ori_sglist, ori_sg_count, reqp->bounce_sgl, reqp->not_aligned_seg_bits); } storvsc_destroy_bounce_buffer(reqp->bounce_sgl); reqp->bounce_sgl_count = 0; } if (reqp->retries > 0) { mtx_lock(&sc->hs_lock); #if HVS_TIMEOUT_TEST xpt_print(ccb->ccb_h.path, "%u: IO returned after timeout, " "waking up timer handler if any.\n", ticks); mtx_lock(&reqp->event.mtx); cv_signal(&reqp->event.cv); mtx_unlock(&reqp->event.mtx); #endif reqp->retries = 0; xpt_print(ccb->ccb_h.path, "%u: IO returned after timeout, " "stopping timer if any.\n", ticks); mtx_unlock(&sc->hs_lock); } #ifdef notyet /* * callout_drain() will wait for the timer handler to finish * if it is running. So we don't need any lock to synchronize * between this routine and the timer handler. * Note that we need to make sure reqp is not freed when timer * handler is using or will use it. */ if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) { callout_drain(&reqp->callout); } #endif ccb->ccb_h.status &= ~CAM_SIM_QUEUED; ccb->ccb_h.status &= ~CAM_STATUS_MASK; if (vm_srb->scsi_status == SCSI_STATUS_OK) { const struct scsi_generic *cmd; - /* * Check whether the data for INQUIRY cmd is valid or * not. Windows 10 and Windows 2016 send all zero * inquiry data to VM even for unpopulated slots. */ cmd = (const struct scsi_generic *) ((ccb->ccb_h.flags & CAM_CDB_POINTER) ? csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes); - if (cmd->opcode == INQUIRY && - /* - * XXX: Temporary work around disk hot plugin on win2k12r2, - * only filtering the invalid disk on win10 or 2016 server. - * So, the hot plugin on win10 and 2016 server needs - * to be fixed. + if (cmd->opcode == INQUIRY) { + /* + * The host of Windows 10 or 2016 server will response + * the inquiry request with invalid data for unexisted device: + [0x7f 0x0 0x5 0x2 0x1f ... ] + * But on windows 2012 R2, the response is: + [0x7f 0x0 0x0 0x0 0x0 ] + * That is why here wants to validate the inquiry response. + * The validation will skip the INQUIRY whose response is short, + * which is less than SHORT_INQUIRY_LENGTH (36). + * + * For more information about INQUIRY, please refer to: + * ftp://ftp.avc-pioneer.com/Mtfuji_7/Proposal/Jun09/INQUIRY.pdf */ - vmstor_proto_version == VMSTOR_PROTOCOL_VERSION_WIN10 && - is_inquiry_valid( - (const struct scsi_inquiry_data *)csio->data_ptr) == 0) { + const struct scsi_inquiry_data *inq_data = + (const struct scsi_inquiry_data *)csio->data_ptr; + uint8_t* resp_buf = (uint8_t*)csio->data_ptr; + /* Get the buffer length reported by host */ + int resp_xfer_len = vm_srb->transfer_len; + /* Get the available buffer length */ + int resp_buf_len = resp_xfer_len >= 5 ? resp_buf[4] + 5 : 0; + int data_len = (resp_buf_len < resp_xfer_len) ? resp_buf_len : resp_xfer_len; + if (data_len < SHORT_INQUIRY_LENGTH) { + ccb->ccb_h.status |= CAM_REQ_CMP; + if (bootverbose && data_len >= 5) { + mtx_lock(&sc->hs_lock); + xpt_print(ccb->ccb_h.path, + "storvsc skips the validation for short inquiry (%d)" + " [%x %x %x %x %x]\n", + data_len,resp_buf[0],resp_buf[1],resp_buf[2], + resp_buf[3],resp_buf[4]); + mtx_unlock(&sc->hs_lock); + } + } else if (is_inquiry_valid(inq_data) == 0) { ccb->ccb_h.status |= CAM_DEV_NOT_THERE; + if (bootverbose && data_len >= 5) { + mtx_lock(&sc->hs_lock); + xpt_print(ccb->ccb_h.path, + "storvsc uninstalled invalid device" + " [%x %x %x %x %x]\n", + resp_buf[0],resp_buf[1],resp_buf[2],resp_buf[3],resp_buf[4]); + mtx_unlock(&sc->hs_lock); + } + } else { + ccb->ccb_h.status |= CAM_REQ_CMP; if (bootverbose) { mtx_lock(&sc->hs_lock); xpt_print(ccb->ccb_h.path, - "storvsc uninstalled device\n"); + "storvsc has passed inquiry response (%d) validation\n", + data_len); mtx_unlock(&sc->hs_lock); } + } } else { ccb->ccb_h.status |= CAM_REQ_CMP; } } else { mtx_lock(&sc->hs_lock); xpt_print(ccb->ccb_h.path, "storvsc scsi_status = %d\n", vm_srb->scsi_status); mtx_unlock(&sc->hs_lock); ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; } ccb->csio.scsi_status = (vm_srb->scsi_status & 0xFF); ccb->csio.resid = ccb->csio.dxfer_len - vm_srb->transfer_len; if (reqp->sense_info_len != 0) { csio->sense_resid = csio->sense_len - reqp->sense_info_len; ccb->ccb_h.status |= CAM_AUTOSNS_VALID; } mtx_lock(&sc->hs_lock); if (reqp->softc->hs_frozen == 1) { xpt_print(ccb->ccb_h.path, "%u: storvsc unfreezing softc 0x%p.\n", ticks, reqp->softc); ccb->ccb_h.status |= CAM_RELEASE_SIMQ; reqp->softc->hs_frozen = 0; } storvsc_free_request(sc, reqp); mtx_unlock(&sc->hs_lock); xpt_done_direct(ccb); } /** * @brief Free a request structure * * Free a request structure by returning it to the free list * * @param sc pointer to a softc * @param reqp pointer to a request structure */ static void storvsc_free_request(struct storvsc_softc *sc, struct hv_storvsc_request *reqp) { LIST_INSERT_HEAD(&sc->hs_free_list, reqp, link); } /** * @brief Determine type of storage device from GUID * * Using the type GUID, determine if this is a StorVSC (paravirtual * SCSI or BlkVSC (paravirtual IDE) device. * * @param dev a device * returns an enum */ static enum hv_storage_type storvsc_get_storage_type(device_t dev) { const char *p = vmbus_get_type(dev); if (!memcmp(p, &gBlkVscDeviceType, sizeof(hv_guid))) { return DRIVER_BLKVSC; } else if (!memcmp(p, &gStorVscDeviceType, sizeof(hv_guid))) { return DRIVER_STORVSC; } return (DRIVER_UNKNOWN); } Index: stable/11 =================================================================== --- stable/11 (revision 302861) +++ stable/11 (revision 302862) Property changes on: stable/11 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r302541,302605