Index: head/sys/net80211/ieee80211_ddb.c =================================================================== --- head/sys/net80211/ieee80211_ddb.c (revision 302017) +++ head/sys/net80211/ieee80211_ddb.c (revision 302018) @@ -1,897 +1,894 @@ /*- * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_ddb.h" #include "opt_wlan.h" #ifdef DDB /* * IEEE 802.11 DDB support */ #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_TDMA #include #endif #ifdef IEEE80211_SUPPORT_MESH #include #endif #include #include #define DB_PRINTSYM(prefix, name, addr) do { \ db_printf("%s%-25s : ", prefix, name); \ db_printsym((db_addr_t) addr, DB_STGY_ANY); \ db_printf("\n"); \ } while (0) static void _db_show_sta(const struct ieee80211_node *); static void _db_show_vap(const struct ieee80211vap *, int, int); static void _db_show_com(const struct ieee80211com *, int showvaps, int showsta, int showmesh, int showprocs); static void _db_show_all_vaps(void *, struct ieee80211com *); static void _db_show_node_table(const char *tag, const struct ieee80211_node_table *); static void _db_show_channel(const char *tag, const struct ieee80211_channel *); static void _db_show_ssid(const char *tag, int ix, int len, const uint8_t *); static void _db_show_appie(const char *tag, const struct ieee80211_appie *); static void _db_show_key(const char *tag, int ix, const struct ieee80211_key *); static void _db_show_roamparams(const char *tag, const void *arg, const struct ieee80211_roamparam *rp); static void _db_show_txparams(const char *tag, const void *arg, const struct ieee80211_txparam *tp); static void _db_show_ageq(const char *tag, const struct ieee80211_ageq *q); static void _db_show_stats(const struct ieee80211_stats *); #ifdef IEEE80211_SUPPORT_MESH static void _db_show_mesh(const struct ieee80211_mesh_state *); #endif DB_SHOW_COMMAND(sta, db_show_sta) { if (!have_addr) { db_printf("usage: show sta \n"); return; } _db_show_sta((const struct ieee80211_node *) addr); } DB_SHOW_COMMAND(statab, db_show_statab) { if (!have_addr) { db_printf("usage: show statab \n"); return; } _db_show_node_table("", (const struct ieee80211_node_table *) addr); } DB_SHOW_COMMAND(vap, db_show_vap) { int i, showmesh = 0, showprocs = 0; if (!have_addr) { db_printf("usage: show vap \n"); return; } for (i = 0; modif[i] != '\0'; i++) switch (modif[i]) { case 'a': showprocs = 1; showmesh = 1; break; case 'm': showmesh = 1; break; case 'p': showprocs = 1; break; } _db_show_vap((const struct ieee80211vap *) addr, showmesh, showprocs); } DB_SHOW_COMMAND(com, db_show_com) { const struct ieee80211com *ic; int i, showprocs = 0, showvaps = 0, showsta = 0, showmesh = 0; if (!have_addr) { db_printf("usage: show com \n"); return; } for (i = 0; modif[i] != '\0'; i++) switch (modif[i]) { case 'a': showsta = showmesh = showvaps = showprocs = 1; break; case 's': showsta = 1; break; case 'm': showmesh = 1; break; case 'v': showvaps = 1; break; case 'p': showprocs = 1; break; } ic = (const struct ieee80211com *) addr; _db_show_com(ic, showvaps, showsta, showmesh, showprocs); } DB_SHOW_ALL_COMMAND(vaps, db_show_all_vaps) { int i, showall = 0; for (i = 0; modif[i] != '\0'; i++) switch (modif[i]) { case 'a': showall = 1; break; } ieee80211_iterate_coms(_db_show_all_vaps, &showall); } #ifdef IEEE80211_SUPPORT_MESH DB_SHOW_ALL_COMMAND(mesh, db_show_mesh) { const struct ieee80211_mesh_state *ms; if (!have_addr) { db_printf("usage: show mesh \n"); return; } ms = (const struct ieee80211_mesh_state *) addr; _db_show_mesh(ms); } #endif /* IEEE80211_SUPPORT_MESH */ static void _db_show_txampdu(const char *sep, int ix, const struct ieee80211_tx_ampdu *tap) { db_printf("%stxampdu[%d]: %p flags %b %s\n", sep, ix, tap, tap->txa_flags, IEEE80211_AGGR_BITS, ieee80211_wme_acnames[TID_TO_WME_AC(tap->txa_tid)]); db_printf("%s token %u lastsample %d pkts %d avgpps %d qbytes %d qframes %d\n", sep, tap->txa_token, tap->txa_lastsample, tap->txa_pkts, tap->txa_avgpps, tap->txa_qbytes, tap->txa_qframes); db_printf("%s start %u seqpending %u wnd %u attempts %d nextrequest %d\n", sep, tap->txa_start, tap->txa_seqpending, tap->txa_wnd, tap->txa_attempts, tap->txa_nextrequest); /* XXX timer */ } static void _db_show_rxampdu(const char *sep, int ix, const struct ieee80211_rx_ampdu *rap) { int i; db_printf("%srxampdu[%d]: %p flags 0x%x tid %u\n", sep, ix, rap, rap->rxa_flags, ix /*XXX */); db_printf("%s qbytes %d qframes %d seqstart %u start %u wnd %u\n", sep, rap->rxa_qbytes, rap->rxa_qframes, rap->rxa_seqstart, rap->rxa_start, rap->rxa_wnd); db_printf("%s age %d nframes %d\n", sep, rap->rxa_age, rap->rxa_nframes); for (i = 0; i < IEEE80211_AGGR_BAWMAX; i++) if (rap->rxa_m[i] != NULL) db_printf("%s m[%2u:%4u] %p\n", sep, i, IEEE80211_SEQ_ADD(rap->rxa_start, i), rap->rxa_m[i]); } static void _db_show_sta(const struct ieee80211_node *ni) { int i; db_printf("0x%p: mac %s refcnt %d\n", ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); db_printf("\tvap %p wdsvap %p ic %p table %p\n", ni->ni_vap, ni->ni_wdsvap, ni->ni_ic, ni->ni_table); db_printf("\tflags=%b\n", ni->ni_flags, IEEE80211_NODE_BITS); - db_printf("\tscangen %u authmode %u ath_flags 0x%x ath_defkeyix %u\n", - ni->ni_scangen, ni->ni_authmode, - ni->ni_ath_flags, ni->ni_ath_defkeyix); + db_printf("\tauthmode %u ath_flags 0x%x ath_defkeyix %u\n", + ni->ni_authmode, ni->ni_ath_flags, ni->ni_ath_defkeyix); db_printf("\tassocid 0x%x txpower %u vlan %u\n", ni->ni_associd, ni->ni_txpower, ni->ni_vlan); db_printf("\tjointime %d (%lu secs) challenge %p\n", ni->ni_jointime, (unsigned long)(time_uptime - ni->ni_jointime), ni->ni_challenge); db_printf("\ties: data %p len %d\n", ni->ni_ies.data, ni->ni_ies.len); db_printf("\t[wpa_ie %p rsn_ie %p wme_ie %p ath_ie %p\n", ni->ni_ies.wpa_ie, ni->ni_ies.rsn_ie, ni->ni_ies.wme_ie, ni->ni_ies.ath_ie); db_printf("\t htcap_ie %p htinfo_ie %p]\n", ni->ni_ies.htcap_ie, ni->ni_ies.htinfo_ie); if (ni->ni_flags & IEEE80211_NODE_QOS) { for (i = 0; i < WME_NUM_TID; i++) { if (ni->ni_txseqs[i] || ni->ni_rxseqs[i]) db_printf("\t[%u] txseq %u rxseq %u fragno %u\n", i, ni->ni_txseqs[i], ni->ni_rxseqs[i] >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[i] & IEEE80211_SEQ_FRAG_MASK); } } db_printf("\ttxseq %u rxseq %u fragno %u rxfragstamp %u\n", ni->ni_txseqs[IEEE80211_NONQOS_TID], ni->ni_rxseqs[IEEE80211_NONQOS_TID] >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[IEEE80211_NONQOS_TID] & IEEE80211_SEQ_FRAG_MASK, ni->ni_rxfragstamp); db_printf("\trxfrag[0] %p rxfrag[1] %p rxfrag[2] %p\n", ni->ni_rxfrag[0], ni->ni_rxfrag[1], ni->ni_rxfrag[2]); _db_show_key("\tucastkey", 0, &ni->ni_ucastkey); db_printf("\tavgrssi 0x%x (rssi %d) noise %d\n", ni->ni_avgrssi, IEEE80211_RSSI_GET(ni->ni_avgrssi), ni->ni_noise); db_printf("\tintval %u capinfo %b\n", ni->ni_intval, ni->ni_capinfo, IEEE80211_CAPINFO_BITS); db_printf("\tbssid %s", ether_sprintf(ni->ni_bssid)); _db_show_ssid(" essid ", 0, ni->ni_esslen, ni->ni_essid); db_printf("\n"); _db_show_channel("\tchannel", ni->ni_chan); db_printf("\n"); db_printf("\terp %b dtim_period %u dtim_count %u\n", ni->ni_erp, IEEE80211_ERP_BITS, ni->ni_dtim_period, ni->ni_dtim_count); db_printf("\thtcap %b htparam 0x%x htctlchan %u ht2ndchan %u\n", ni->ni_htcap, IEEE80211_HTCAP_BITS, ni->ni_htparam, ni->ni_htctlchan, ni->ni_ht2ndchan); db_printf("\thtopmode 0x%x htstbc 0x%x chw %u\n", ni->ni_htopmode, ni->ni_htstbc, ni->ni_chw); /* XXX ampdu state */ for (i = 0; i < WME_NUM_TID; i++) if (ni->ni_tx_ampdu[i].txa_flags & IEEE80211_AGGR_SETUP) _db_show_txampdu("\t", i, &ni->ni_tx_ampdu[i]); for (i = 0; i < WME_NUM_TID; i++) if (ni->ni_rx_ampdu[i].rxa_flags) _db_show_rxampdu("\t", i, &ni->ni_rx_ampdu[i]); db_printf("\tinact %u inact_reload %u txrate %u\n", ni->ni_inact, ni->ni_inact_reload, ni->ni_txrate); #ifdef IEEE80211_SUPPORT_MESH _db_show_ssid("\tmeshid ", 0, ni->ni_meshidlen, ni->ni_meshid); db_printf(" mlstate %b mllid 0x%x mlpid 0x%x mlrcnt %u mltval %u\n", ni->ni_mlstate, IEEE80211_MESH_MLSTATE_BITS, ni->ni_mllid, ni->ni_mlpid, ni->ni_mlrcnt, ni->ni_mltval); #endif } #ifdef IEEE80211_SUPPORT_TDMA static void _db_show_tdma(const char *sep, const struct ieee80211_tdma_state *ts, int showprocs) { db_printf("%stdma %p:\n", sep, ts); db_printf("%s version %u slot %u bintval %u peer %p\n", sep, ts->tdma_version, ts->tdma_slot, ts->tdma_bintval, ts->tdma_peer); db_printf("%s slotlen %u slotcnt %u", sep, ts->tdma_slotlen, ts->tdma_slotcnt); db_printf(" inuse 0x%x active 0x%x count %d\n", ts->tdma_inuse[0], ts->tdma_active[0], ts->tdma_count); if (showprocs) { DB_PRINTSYM(sep, " tdma_newstate", ts->tdma_newstate); DB_PRINTSYM(sep, " tdma_recv_mgmt", ts->tdma_recv_mgmt); DB_PRINTSYM(sep, " tdma_opdetach", ts->tdma_opdetach); } } #endif /* IEEE80211_SUPPORT_TDMA */ static void _db_show_vap(const struct ieee80211vap *vap, int showmesh, int showprocs) { const struct ieee80211com *ic = vap->iv_ic; int i; db_printf("%p:", vap); db_printf(" bss %p", vap->iv_bss); db_printf(" myaddr %s", ether_sprintf(vap->iv_myaddr)); db_printf("\n"); db_printf("\topmode %s", ieee80211_opmode_name[vap->iv_opmode]); #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) db_printf("(%p)", vap->iv_mesh); #endif db_printf(" state %s", ieee80211_state_name[vap->iv_state]); db_printf(" ifp %p(%s)", vap->iv_ifp, vap->iv_ifp->if_xname); db_printf("\n"); db_printf("\tic %p", vap->iv_ic); db_printf(" media %p", &vap->iv_media); db_printf(" bpf_if %p", vap->iv_rawbpf); db_printf(" mgtsend %p", &vap->iv_mgtsend); #if 0 struct sysctllog *iv_sysctl; /* dynamic sysctl context */ #endif db_printf("\n"); db_printf("\tdebug=%b\n", vap->iv_debug, IEEE80211_MSG_BITS); db_printf("\tflags=%b\n", vap->iv_flags, IEEE80211_F_BITS); db_printf("\tflags_ext=%b\n", vap->iv_flags_ext, IEEE80211_FEXT_BITS); db_printf("\tflags_ht=%b\n", vap->iv_flags_ht, IEEE80211_FHT_BITS); db_printf("\tflags_ven=%b\n", vap->iv_flags_ven, IEEE80211_FVEN_BITS); db_printf("\tcaps=%b\n", vap->iv_caps, IEEE80211_C_BITS); db_printf("\thtcaps=%b\n", vap->iv_htcaps, IEEE80211_C_HTCAP_BITS); _db_show_stats(&vap->iv_stats); db_printf("\tinact_init %d", vap->iv_inact_init); db_printf(" inact_auth %d", vap->iv_inact_auth); db_printf(" inact_run %d", vap->iv_inact_run); db_printf(" inact_probe %d", vap->iv_inact_probe); db_printf("\n"); db_printf("\tdes_nssid %d", vap->iv_des_nssid); if (vap->iv_des_nssid) _db_show_ssid(" des_ssid[%u] ", 0, vap->iv_des_ssid[0].len, vap->iv_des_ssid[0].ssid); db_printf(" des_bssid %s", ether_sprintf(vap->iv_des_bssid)); db_printf("\n"); db_printf("\tdes_mode %d", vap->iv_des_mode); _db_show_channel(" des_chan", vap->iv_des_chan); db_printf("\n"); #if 0 int iv_nicknamelen; /* XXX junk */ uint8_t iv_nickname[IEEE80211_NWID_LEN]; #endif db_printf("\tbgscanidle %u", vap->iv_bgscanidle); db_printf(" bgscanintvl %u", vap->iv_bgscanintvl); db_printf(" scanvalid %u", vap->iv_scanvalid); db_printf("\n"); db_printf("\tscanreq_duration %u", vap->iv_scanreq_duration); db_printf(" scanreq_mindwell %u", vap->iv_scanreq_mindwell); db_printf(" scanreq_maxdwell %u", vap->iv_scanreq_maxdwell); db_printf("\n"); db_printf("\tscanreq_flags 0x%x", vap->iv_scanreq_flags); db_printf(" scanreq_nssid %d", vap->iv_scanreq_nssid); for (i = 0; i < vap->iv_scanreq_nssid; i++) _db_show_ssid(" scanreq_ssid[%u]", i, vap->iv_scanreq_ssid[i].len, vap->iv_scanreq_ssid[i].ssid); db_printf(" roaming %d", vap->iv_roaming); db_printf("\n"); for (i = IEEE80211_MODE_11A; i < IEEE80211_MODE_MAX; i++) if (isset(ic->ic_modecaps, i)) { _db_show_roamparams("\troamparms[%s]", ieee80211_phymode_name[i], &vap->iv_roamparms[i]); db_printf("\n"); } db_printf("\tbmissthreshold %u", vap->iv_bmissthreshold); db_printf(" bmiss_max %u", vap->iv_bmiss_count); db_printf(" bmiss_max %d", vap->iv_bmiss_max); db_printf("\n"); db_printf("\tswbmiss_count %u", vap->iv_swbmiss_count); db_printf(" swbmiss_period %u", vap->iv_swbmiss_period); db_printf(" swbmiss %p", &vap->iv_swbmiss); db_printf("\n"); db_printf("\tampdu_rxmax %d", vap->iv_ampdu_rxmax); db_printf(" ampdu_density %d", vap->iv_ampdu_density); db_printf(" ampdu_limit %d", vap->iv_ampdu_limit); db_printf(" amsdu_limit %d", vap->iv_amsdu_limit); db_printf("\n"); db_printf("\tmax_aid %u", vap->iv_max_aid); db_printf(" aid_bitmap %p", vap->iv_aid_bitmap); db_printf("\n"); db_printf("\tsta_assoc %u", vap->iv_sta_assoc); db_printf(" ps_sta %u", vap->iv_ps_sta); db_printf(" ps_pending %u", vap->iv_ps_pending); db_printf(" tim_len %u", vap->iv_tim_len); db_printf(" tim_bitmap %p", vap->iv_tim_bitmap); db_printf("\n"); db_printf("\tdtim_period %u", vap->iv_dtim_period); db_printf(" dtim_count %u", vap->iv_dtim_count); db_printf(" set_tim %p", vap->iv_set_tim); db_printf(" csa_count %d", vap->iv_csa_count); db_printf("\n"); db_printf("\trtsthreshold %u", vap->iv_rtsthreshold); db_printf(" fragthreshold %u", vap->iv_fragthreshold); db_printf(" inact_timer %d", vap->iv_inact_timer); db_printf("\n"); for (i = IEEE80211_MODE_11A; i < IEEE80211_MODE_MAX; i++) if (isset(ic->ic_modecaps, i)) { _db_show_txparams("\ttxparms[%s]", ieee80211_phymode_name[i], &vap->iv_txparms[i]); db_printf("\n"); } /* application-specified IE's to attach to mgt frames */ _db_show_appie("\tappie_beacon", vap->iv_appie_beacon); _db_show_appie("\tappie_probereq", vap->iv_appie_probereq); _db_show_appie("\tappie_proberesp", vap->iv_appie_proberesp); _db_show_appie("\tappie_assocreq", vap->iv_appie_assocreq); _db_show_appie("\tappie_asscoresp", vap->iv_appie_assocresp); _db_show_appie("\tappie_wpa", vap->iv_appie_wpa); if (vap->iv_wpa_ie != NULL || vap->iv_rsn_ie != NULL) { if (vap->iv_wpa_ie != NULL) db_printf("\twpa_ie %p", vap->iv_wpa_ie); if (vap->iv_rsn_ie != NULL) db_printf("\trsn_ie %p", vap->iv_rsn_ie); db_printf("\n"); } db_printf("\tmax_keyix %u", vap->iv_max_keyix); db_printf(" def_txkey %d", vap->iv_def_txkey); db_printf("\n"); for (i = 0; i < IEEE80211_WEP_NKID; i++) _db_show_key("\tnw_keys[%u]", i, &vap->iv_nw_keys[i]); db_printf("\tauth %p(%s)", vap->iv_auth, vap->iv_auth->ia_name); db_printf(" ec %p", vap->iv_ec); db_printf(" acl %p", vap->iv_acl); db_printf(" as %p", vap->iv_as); db_printf("\n"); #ifdef IEEE80211_SUPPORT_MESH if (showmesh && vap->iv_mesh != NULL) _db_show_mesh(vap->iv_mesh); #endif #ifdef IEEE80211_SUPPORT_TDMA if (vap->iv_tdma != NULL) _db_show_tdma("\t", vap->iv_tdma, showprocs); #endif /* IEEE80211_SUPPORT_TDMA */ if (showprocs) { DB_PRINTSYM("\t", "iv_key_alloc", vap->iv_key_alloc); DB_PRINTSYM("\t", "iv_key_delete", vap->iv_key_delete); DB_PRINTSYM("\t", "iv_key_set", vap->iv_key_set); DB_PRINTSYM("\t", "iv_key_update_begin", vap->iv_key_update_begin); DB_PRINTSYM("\t", "iv_key_update_end", vap->iv_key_update_end); DB_PRINTSYM("\t", "iv_opdetach", vap->iv_opdetach); DB_PRINTSYM("\t", "iv_input", vap->iv_input); DB_PRINTSYM("\t", "iv_recv_mgmt", vap->iv_recv_mgmt); DB_PRINTSYM("\t", "iv_deliver_data", vap->iv_deliver_data); DB_PRINTSYM("\t", "iv_bmiss", vap->iv_bmiss); DB_PRINTSYM("\t", "iv_reset", vap->iv_reset); DB_PRINTSYM("\t", "iv_update_beacon", vap->iv_update_beacon); DB_PRINTSYM("\t", "iv_newstate", vap->iv_newstate); DB_PRINTSYM("\t", "iv_output", vap->iv_output); } } static void _db_show_com(const struct ieee80211com *ic, int showvaps, int showsta, int showmesh, int showprocs) { struct ieee80211vap *vap; db_printf("%p:", ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) db_printf(" %s(%p)", vap->iv_ifp->if_xname, vap); db_printf("\n"); db_printf("\tsoftc %p", ic->ic_softc); db_printf("\tname %s", ic->ic_name); db_printf(" comlock %p", &ic->ic_comlock); db_printf("\n"); db_printf("\theadroom %d", ic->ic_headroom); db_printf(" phytype %d", ic->ic_phytype); db_printf(" opmode %s", ieee80211_opmode_name[ic->ic_opmode]); db_printf("\n"); db_printf(" inact %p", &ic->ic_inact); db_printf("\n"); db_printf("\tflags=%b\n", ic->ic_flags, IEEE80211_F_BITS); db_printf("\tflags_ext=%b\n", ic->ic_flags_ext, IEEE80211_FEXT_BITS); db_printf("\tflags_ht=%b\n", ic->ic_flags_ht, IEEE80211_FHT_BITS); db_printf("\tflags_ven=%b\n", ic->ic_flags_ven, IEEE80211_FVEN_BITS); db_printf("\tcaps=%b\n", ic->ic_caps, IEEE80211_C_BITS); db_printf("\tcryptocaps=%b\n", ic->ic_cryptocaps, IEEE80211_CRYPTO_BITS); db_printf("\thtcaps=%b\n", ic->ic_htcaps, IEEE80211_HTCAP_BITS); #if 0 uint8_t ic_modecaps[2]; /* set of mode capabilities */ #endif db_printf("\tcurmode %u", ic->ic_curmode); db_printf(" promisc %u", ic->ic_promisc); db_printf(" allmulti %u", ic->ic_allmulti); db_printf(" nrunning %u", ic->ic_nrunning); db_printf("\n"); db_printf("\tbintval %u", ic->ic_bintval); db_printf(" lintval %u", ic->ic_lintval); db_printf(" holdover %u", ic->ic_holdover); db_printf(" txpowlimit %u", ic->ic_txpowlimit); db_printf("\n"); #if 0 struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX]; #endif /* * Channel state: * * ic_channels is the set of available channels for the device; * it is setup by the driver * ic_nchans is the number of valid entries in ic_channels * ic_chan_avail is a bit vector of these channels used to check * whether a channel is available w/o searching the channel table. * ic_chan_active is a (potentially) constrained subset of * ic_chan_avail that reflects any mode setting or user-specified * limit on the set of channels to use/scan * ic_curchan is the current channel the device is set to; it may * be different from ic_bsschan when we are off-channel scanning * or otherwise doing background work * ic_bsschan is the channel selected for operation; it may * be undefined (IEEE80211_CHAN_ANYC) * ic_prevchan is a cached ``previous channel'' used to optimize * lookups when switching back+forth between two channels * (e.g. for dynamic turbo) */ db_printf("\tnchans %d", ic->ic_nchans); #if 0 struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX]; uint8_t ic_chan_avail[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_active[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_scan[IEEE80211_CHAN_BYTES]; #endif db_printf("\n"); _db_show_channel("\tcurchan", ic->ic_curchan); db_printf("\n"); _db_show_channel("\tbsschan", ic->ic_bsschan); db_printf("\n"); _db_show_channel("\tprevchan", ic->ic_prevchan); db_printf("\n"); db_printf("\tregdomain %p", &ic->ic_regdomain); db_printf("\n"); _db_show_channel("\tcsa_newchan", ic->ic_csa_newchan); db_printf(" csa_count %d", ic->ic_csa_count); db_printf( "dfs %p", &ic->ic_dfs); db_printf("\n"); db_printf("\tscan %p", ic->ic_scan); db_printf(" lastdata %d", ic->ic_lastdata); db_printf(" lastscan %d", ic->ic_lastscan); db_printf("\n"); db_printf("\tmax_keyix %d", ic->ic_max_keyix); db_printf(" hash_key 0x%x", ic->ic_hash_key); db_printf(" wme %p", &ic->ic_wme); if (!showsta) db_printf(" sta %p", &ic->ic_sta); db_printf("\n"); db_printf("\tstageq@%p:\n", &ic->ic_stageq); _db_show_ageq("\t", &ic->ic_stageq); if (showsta) _db_show_node_table("\t", &ic->ic_sta); db_printf("\tprotmode %d", ic->ic_protmode); db_printf(" nonerpsta %u", ic->ic_nonerpsta); db_printf(" longslotsta %u", ic->ic_longslotsta); db_printf(" lastnonerp %d", ic->ic_lastnonerp); db_printf("\n"); db_printf("\tsta_assoc %u", ic->ic_sta_assoc); db_printf(" ht_sta_assoc %u", ic->ic_ht_sta_assoc); db_printf(" ht40_sta_assoc %u", ic->ic_ht40_sta_assoc); db_printf("\n"); db_printf("\tcurhtprotmode 0x%x", ic->ic_curhtprotmode); db_printf(" htprotmode %d", ic->ic_htprotmode); db_printf(" lastnonht %d", ic->ic_lastnonht); db_printf("\n"); db_printf("\tsuperg %p\n", ic->ic_superg); db_printf("\tmontaps %d th %p txchan %p rh %p rxchan %p\n", ic->ic_montaps, ic->ic_th, ic->ic_txchan, ic->ic_rh, ic->ic_rxchan); if (showprocs) { DB_PRINTSYM("\t", "ic_vap_create", ic->ic_vap_create); DB_PRINTSYM("\t", "ic_vap_delete", ic->ic_vap_delete); #if 0 /* operating mode attachment */ ieee80211vap_attach ic_vattach[IEEE80211_OPMODE_MAX]; #endif DB_PRINTSYM("\t", "ic_newassoc", ic->ic_newassoc); DB_PRINTSYM("\t", "ic_getradiocaps", ic->ic_getradiocaps); DB_PRINTSYM("\t", "ic_setregdomain", ic->ic_setregdomain); DB_PRINTSYM("\t", "ic_send_mgmt", ic->ic_send_mgmt); DB_PRINTSYM("\t", "ic_raw_xmit", ic->ic_raw_xmit); DB_PRINTSYM("\t", "ic_updateslot", ic->ic_updateslot); DB_PRINTSYM("\t", "ic_update_mcast", ic->ic_update_mcast); DB_PRINTSYM("\t", "ic_update_promisc", ic->ic_update_promisc); DB_PRINTSYM("\t", "ic_node_alloc", ic->ic_node_alloc); DB_PRINTSYM("\t", "ic_node_free", ic->ic_node_free); DB_PRINTSYM("\t", "ic_node_cleanup", ic->ic_node_cleanup); DB_PRINTSYM("\t", "ic_node_getrssi", ic->ic_node_getrssi); DB_PRINTSYM("\t", "ic_node_getsignal", ic->ic_node_getsignal); DB_PRINTSYM("\t", "ic_node_getmimoinfo", ic->ic_node_getmimoinfo); DB_PRINTSYM("\t", "ic_scan_start", ic->ic_scan_start); DB_PRINTSYM("\t", "ic_scan_end", ic->ic_scan_end); DB_PRINTSYM("\t", "ic_set_channel", ic->ic_set_channel); DB_PRINTSYM("\t", "ic_scan_curchan", ic->ic_scan_curchan); DB_PRINTSYM("\t", "ic_scan_mindwell", ic->ic_scan_mindwell); DB_PRINTSYM("\t", "ic_recv_action", ic->ic_recv_action); DB_PRINTSYM("\t", "ic_send_action", ic->ic_send_action); DB_PRINTSYM("\t", "ic_addba_request", ic->ic_addba_request); DB_PRINTSYM("\t", "ic_addba_response", ic->ic_addba_response); DB_PRINTSYM("\t", "ic_addba_stop", ic->ic_addba_stop); } if (showvaps && !TAILQ_EMPTY(&ic->ic_vaps)) { db_printf("\n"); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) _db_show_vap(vap, showmesh, showprocs); } if (showsta && !TAILQ_EMPTY(&ic->ic_sta.nt_node)) { const struct ieee80211_node_table *nt = &ic->ic_sta; const struct ieee80211_node *ni; TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { db_printf("\n"); _db_show_sta(ni); } } } static void _db_show_all_vaps(void *arg, struct ieee80211com *ic) { int showall = *(int *)arg; if (!showall) { const struct ieee80211vap *vap; db_printf("%s: com %p vaps:", ic->ic_name, ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) db_printf(" %s(%p)", vap->iv_ifp->if_xname, vap); db_printf("\n"); } else _db_show_com(ic, 1, 1, 1, 1); } static void _db_show_node_table(const char *tag, const struct ieee80211_node_table *nt) { int i; db_printf("%s%s@%p:\n", tag, nt->nt_name, nt); db_printf("%s nodelock %p", tag, &nt->nt_nodelock); db_printf(" inact_init %d", nt->nt_inact_init); - db_printf(" scanlock %p", &nt->nt_scanlock); - db_printf(" scangen %u\n", nt->nt_scangen); db_printf("%s keyixmax %d keyixmap %p\n", tag, nt->nt_keyixmax, nt->nt_keyixmap); for (i = 0; i < nt->nt_keyixmax; i++) { const struct ieee80211_node *ni = nt->nt_keyixmap[i]; if (ni != NULL) db_printf("%s [%3u] %p %s\n", tag, i, ni, ether_sprintf(ni->ni_macaddr)); } } static void _db_show_channel(const char *tag, const struct ieee80211_channel *c) { db_printf("%s ", tag); if (c == NULL) db_printf(""); else if (c == IEEE80211_CHAN_ANYC) db_printf(""); else db_printf("[%u (%u) flags=%b maxreg %d maxpow %d minpow %d state 0x%x extieee %u]", c->ic_freq, c->ic_ieee, c->ic_flags, IEEE80211_CHAN_BITS, c->ic_maxregpower, c->ic_maxpower, c->ic_minpower, c->ic_state, c->ic_extieee); } static void _db_show_ssid(const char *tag, int ix, int len, const uint8_t *ssid) { const uint8_t *p; int i; db_printf(tag, ix); if (len > IEEE80211_NWID_LEN) len = IEEE80211_NWID_LEN; /* determine printable or not */ for (i = 0, p = ssid; i < len; i++, p++) { if (*p < ' ' || *p > 0x7e) break; } if (i == len) { db_printf("\""); for (i = 0, p = ssid; i < len; i++, p++) db_printf("%c", *p); db_printf("\""); } else { db_printf("0x"); for (i = 0, p = ssid; i < len; i++, p++) db_printf("%02x", *p); } } static void _db_show_appie(const char *tag, const struct ieee80211_appie *ie) { const uint8_t *p; int i; if (ie == NULL) return; db_printf("%s [0x", tag); for (i = 0, p = ie->ie_data; i < ie->ie_len; i++, p++) db_printf("%02x", *p); db_printf("]\n"); } static void _db_show_key(const char *tag, int ix, const struct ieee80211_key *wk) { static const uint8_t zerodata[IEEE80211_KEYBUF_SIZE]; const struct ieee80211_cipher *cip = wk->wk_cipher; int keylen = wk->wk_keylen; db_printf(tag, ix); switch (cip->ic_cipher) { case IEEE80211_CIPHER_WEP: /* compatibility */ db_printf(" wepkey %u:%s", wk->wk_keyix, keylen <= 5 ? "40-bit" : keylen <= 13 ? "104-bit" : "128-bit"); break; case IEEE80211_CIPHER_TKIP: if (keylen > 128/8) keylen -= 128/8; /* ignore MIC for now */ db_printf(" TKIP %u:%u-bit", wk->wk_keyix, 8*keylen); break; case IEEE80211_CIPHER_AES_OCB: db_printf(" AES-OCB %u:%u-bit", wk->wk_keyix, 8*keylen); break; case IEEE80211_CIPHER_AES_CCM: db_printf(" AES-CCM %u:%u-bit", wk->wk_keyix, 8*keylen); break; case IEEE80211_CIPHER_CKIP: db_printf(" CKIP %u:%u-bit", wk->wk_keyix, 8*keylen); break; case IEEE80211_CIPHER_NONE: db_printf(" NULL %u:%u-bit", wk->wk_keyix, 8*keylen); break; default: db_printf(" UNKNOWN (0x%x) %u:%u-bit", cip->ic_cipher, wk->wk_keyix, 8*keylen); break; } if (wk->wk_rxkeyix != wk->wk_keyix) db_printf(" rxkeyix %u", wk->wk_rxkeyix); if (memcmp(wk->wk_key, zerodata, keylen) != 0) { int i; db_printf(" <"); for (i = 0; i < keylen; i++) db_printf("%02x", wk->wk_key[i]); db_printf(">"); if (cip->ic_cipher != IEEE80211_CIPHER_WEP && wk->wk_keyrsc[IEEE80211_NONQOS_TID] != 0) db_printf(" rsc %ju", (uintmax_t)wk->wk_keyrsc[IEEE80211_NONQOS_TID]); if (cip->ic_cipher != IEEE80211_CIPHER_WEP && wk->wk_keytsc != 0) db_printf(" tsc %ju", (uintmax_t)wk->wk_keytsc); db_printf(" flags=%b", wk->wk_flags, IEEE80211_KEY_BITS); } db_printf("\n"); } static void printrate(const char *tag, int v) { if (v == IEEE80211_FIXED_RATE_NONE) db_printf(" %s ", tag); else if (v == 11) db_printf(" %s 5.5", tag); else if (v & IEEE80211_RATE_MCS) db_printf(" %s MCS%d", tag, v &~ IEEE80211_RATE_MCS); else db_printf(" %s %d", tag, v/2); } static void _db_show_roamparams(const char *tag, const void *arg, const struct ieee80211_roamparam *rp) { db_printf(tag, arg); if (rp->rssi & 1) db_printf(" rssi %u.5", rp->rssi/2); else db_printf(" rssi %u", rp->rssi/2); printrate("rate", rp->rate); } static void _db_show_txparams(const char *tag, const void *arg, const struct ieee80211_txparam *tp) { db_printf(tag, arg); printrate("ucastrate", tp->ucastrate); printrate("mcastrate", tp->mcastrate); printrate("mgmtrate", tp->mgmtrate); db_printf(" maxretry %d", tp->maxretry); } static void _db_show_ageq(const char *tag, const struct ieee80211_ageq *q) { const struct mbuf *m; db_printf("%s lock %p len %d maxlen %d drops %d head %p tail %p\n", tag, &q->aq_lock, q->aq_len, q->aq_maxlen, q->aq_drops, q->aq_head, q->aq_tail); for (m = q->aq_head; m != NULL; m = m->m_nextpkt) db_printf("%s %p (len %d, %b)\n", tag, m, m->m_len, /* XXX could be either TX or RX but is mostly TX */ m->m_flags, IEEE80211_MBUF_TX_FLAG_BITS); } static void _db_show_stats(const struct ieee80211_stats *is) { } #ifdef IEEE80211_SUPPORT_MESH static void _db_show_mesh(const struct ieee80211_mesh_state *ms) { struct ieee80211_mesh_route *rt; int i; _db_show_ssid(" meshid ", 0, ms->ms_idlen, ms->ms_id); db_printf("nextseq %u ttl %u flags 0x%x\n", ms->ms_seq, ms->ms_ttl, ms->ms_flags); db_printf("routing table:\n"); i = 0; TAILQ_FOREACH(rt, &ms->ms_routes, rt_next) { db_printf("entry %d:\tdest: %6D nexthop: %6D metric: %u", i, rt->rt_dest, ":", rt->rt_nexthop, ":", rt->rt_metric); db_printf("\tlifetime: %u lastseq: %u priv: %p\n", ieee80211_mesh_rt_update(rt, 0), rt->rt_lastmseq, rt->rt_priv); i++; } } #endif /* IEEE80211_SUPPORT_MESH */ #endif /* DDB */ Index: head/sys/net80211/ieee80211_freebsd.h =================================================================== --- head/sys/net80211/ieee80211_freebsd.h (revision 302017) +++ head/sys/net80211/ieee80211_freebsd.h (revision 302018) @@ -1,678 +1,656 @@ /*- * Copyright (c) 2003-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_FREEBSD_H_ #define _NET80211_IEEE80211_FREEBSD_H_ #ifdef _KERNEL #include #include #include #include #include #include #include #include /* * Common state locking definitions. */ typedef struct { char name[16]; /* e.g. "ath0_com_lock" */ struct mtx mtx; } ieee80211_com_lock_t; #define IEEE80211_LOCK_INIT(_ic, _name) do { \ ieee80211_com_lock_t *cl = &(_ic)->ic_comlock; \ snprintf(cl->name, sizeof(cl->name), "%s_com_lock", _name); \ mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF | MTX_RECURSE); \ } while (0) #define IEEE80211_LOCK_OBJ(_ic) (&(_ic)->ic_comlock.mtx) #define IEEE80211_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_LOCK_OBJ(_ic)) #define IEEE80211_LOCK(_ic) mtx_lock(IEEE80211_LOCK_OBJ(_ic)) #define IEEE80211_UNLOCK(_ic) mtx_unlock(IEEE80211_LOCK_OBJ(_ic)) #define IEEE80211_LOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_OWNED) #define IEEE80211_UNLOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_NOTOWNED) /* * Transmit lock. * * This is a (mostly) temporary lock designed to serialise all of the * transmission operations throughout the stack. */ typedef struct { char name[16]; /* e.g. "ath0_tx_lock" */ struct mtx mtx; } ieee80211_tx_lock_t; #define IEEE80211_TX_LOCK_INIT(_ic, _name) do { \ ieee80211_tx_lock_t *cl = &(_ic)->ic_txlock; \ snprintf(cl->name, sizeof(cl->name), "%s_tx_lock", _name); \ mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF); \ } while (0) #define IEEE80211_TX_LOCK_OBJ(_ic) (&(_ic)->ic_txlock.mtx) #define IEEE80211_TX_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_TX_LOCK_OBJ(_ic)) #define IEEE80211_TX_LOCK(_ic) mtx_lock(IEEE80211_TX_LOCK_OBJ(_ic)) #define IEEE80211_TX_UNLOCK(_ic) mtx_unlock(IEEE80211_TX_LOCK_OBJ(_ic)) #define IEEE80211_TX_LOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_OWNED) #define IEEE80211_TX_UNLOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_NOTOWNED) /* * Node locking definitions. */ typedef struct { char name[16]; /* e.g. "ath0_node_lock" */ struct mtx mtx; } ieee80211_node_lock_t; #define IEEE80211_NODE_LOCK_INIT(_nt, _name) do { \ ieee80211_node_lock_t *nl = &(_nt)->nt_nodelock; \ snprintf(nl->name, sizeof(nl->name), "%s_node_lock", _name); \ mtx_init(&nl->mtx, nl->name, NULL, MTX_DEF | MTX_RECURSE); \ } while (0) #define IEEE80211_NODE_LOCK_OBJ(_nt) (&(_nt)->nt_nodelock.mtx) #define IEEE80211_NODE_LOCK_DESTROY(_nt) \ mtx_destroy(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_LOCK(_nt) \ mtx_lock(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_IS_LOCKED(_nt) \ mtx_owned(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_UNLOCK(_nt) \ mtx_unlock(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_LOCK_ASSERT(_nt) \ mtx_assert(IEEE80211_NODE_LOCK_OBJ(_nt), MA_OWNED) /* - * Node table iteration locking definitions; this protects the - * scan generation # used to iterate over the station table - * while grabbing+releasing the node lock. - */ -typedef struct { - char name[16]; /* e.g. "ath0_scan_lock" */ - struct mtx mtx; -} ieee80211_scan_lock_t; -#define IEEE80211_NODE_ITERATE_LOCK_INIT(_nt, _name) do { \ - ieee80211_scan_lock_t *sl = &(_nt)->nt_scanlock; \ - snprintf(sl->name, sizeof(sl->name), "%s_scan_lock", _name); \ - mtx_init(&sl->mtx, sl->name, NULL, MTX_DEF); \ -} while (0) -#define IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt) (&(_nt)->nt_scanlock.mtx) -#define IEEE80211_NODE_ITERATE_LOCK_DESTROY(_nt) \ - mtx_destroy(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) -#define IEEE80211_NODE_ITERATE_LOCK(_nt) \ - mtx_lock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) -#define IEEE80211_NODE_ITERATE_UNLOCK(_nt) \ - mtx_unlock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) - -/* * Power-save queue definitions. */ typedef struct mtx ieee80211_psq_lock_t; #define IEEE80211_PSQ_INIT(_psq, _name) \ mtx_init(&(_psq)->psq_lock, _name, "802.11 ps q", MTX_DEF) #define IEEE80211_PSQ_DESTROY(_psq) mtx_destroy(&(_psq)->psq_lock) #define IEEE80211_PSQ_LOCK(_psq) mtx_lock(&(_psq)->psq_lock) #define IEEE80211_PSQ_UNLOCK(_psq) mtx_unlock(&(_psq)->psq_lock) #ifndef IF_PREPEND_LIST #define _IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \ (mtail)->m_nextpkt = (ifq)->ifq_head; \ if ((ifq)->ifq_tail == NULL) \ (ifq)->ifq_tail = (mtail); \ (ifq)->ifq_head = (mhead); \ (ifq)->ifq_len += (mcount); \ } while (0) #define IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \ IF_LOCK(ifq); \ _IF_PREPEND_LIST(ifq, mhead, mtail, mcount); \ IF_UNLOCK(ifq); \ } while (0) #endif /* IF_PREPEND_LIST */ /* * Age queue definitions. */ typedef struct mtx ieee80211_ageq_lock_t; #define IEEE80211_AGEQ_INIT(_aq, _name) \ mtx_init(&(_aq)->aq_lock, _name, "802.11 age q", MTX_DEF) #define IEEE80211_AGEQ_DESTROY(_aq) mtx_destroy(&(_aq)->aq_lock) #define IEEE80211_AGEQ_LOCK(_aq) mtx_lock(&(_aq)->aq_lock) #define IEEE80211_AGEQ_UNLOCK(_aq) mtx_unlock(&(_aq)->aq_lock) /* * 802.1x MAC ACL database locking definitions. */ typedef struct mtx acl_lock_t; #define ACL_LOCK_INIT(_as, _name) \ mtx_init(&(_as)->as_lock, _name, "802.11 ACL", MTX_DEF) #define ACL_LOCK_DESTROY(_as) mtx_destroy(&(_as)->as_lock) #define ACL_LOCK(_as) mtx_lock(&(_as)->as_lock) #define ACL_UNLOCK(_as) mtx_unlock(&(_as)->as_lock) #define ACL_LOCK_ASSERT(_as) \ mtx_assert((&(_as)->as_lock), MA_OWNED) /* * Scan table definitions. */ typedef struct mtx ieee80211_scan_table_lock_t; #define IEEE80211_SCAN_TABLE_LOCK_INIT(_st, _name) \ mtx_init(&(_st)->st_lock, _name, "802.11 scan table", MTX_DEF) #define IEEE80211_SCAN_TABLE_LOCK_DESTROY(_st) mtx_destroy(&(_st)->st_lock) #define IEEE80211_SCAN_TABLE_LOCK(_st) mtx_lock(&(_st)->st_lock) #define IEEE80211_SCAN_TABLE_UNLOCK(_st) mtx_unlock(&(_st)->st_lock) typedef struct mtx ieee80211_scan_iter_lock_t; #define IEEE80211_SCAN_ITER_LOCK_INIT(_st, _name) \ mtx_init(&(_st)->st_scanlock, _name, "802.11 scangen", MTX_DEF) #define IEEE80211_SCAN_ITER_LOCK_DESTROY(_st) mtx_destroy(&(_st)->st_scanlock) #define IEEE80211_SCAN_ITER_LOCK(_st) mtx_lock(&(_st)->st_scanlock) #define IEEE80211_SCAN_ITER_UNLOCK(_st) mtx_unlock(&(_st)->st_scanlock) /* * Mesh node/routing definitions. */ typedef struct mtx ieee80211_rte_lock_t; #define MESH_RT_ENTRY_LOCK_INIT(_rt, _name) \ mtx_init(&(rt)->rt_lock, _name, "802.11s route entry", MTX_DEF) #define MESH_RT_ENTRY_LOCK_DESTROY(_rt) \ mtx_destroy(&(_rt)->rt_lock) #define MESH_RT_ENTRY_LOCK(rt) mtx_lock(&(rt)->rt_lock) #define MESH_RT_ENTRY_LOCK_ASSERT(rt) mtx_assert(&(rt)->rt_lock, MA_OWNED) #define MESH_RT_ENTRY_UNLOCK(rt) mtx_unlock(&(rt)->rt_lock) typedef struct mtx ieee80211_rt_lock_t; #define MESH_RT_LOCK(ms) mtx_lock(&(ms)->ms_rt_lock) #define MESH_RT_LOCK_ASSERT(ms) mtx_assert(&(ms)->ms_rt_lock, MA_OWNED) #define MESH_RT_UNLOCK(ms) mtx_unlock(&(ms)->ms_rt_lock) #define MESH_RT_LOCK_INIT(ms, name) \ mtx_init(&(ms)->ms_rt_lock, name, "802.11s routing table", MTX_DEF) #define MESH_RT_LOCK_DESTROY(ms) \ mtx_destroy(&(ms)->ms_rt_lock) /* * Node reference counting definitions. * * ieee80211_node_initref initialize the reference count to 1 * ieee80211_node_incref add a reference * ieee80211_node_decref remove a reference * ieee80211_node_dectestref remove a reference and return 1 if this * is the last reference, otherwise 0 * ieee80211_node_refcnt reference count for printing (only) */ #include #define ieee80211_node_initref(_ni) \ do { ((_ni)->ni_refcnt = 1); } while (0) #define ieee80211_node_incref(_ni) \ atomic_add_int(&(_ni)->ni_refcnt, 1) #define ieee80211_node_decref(_ni) \ atomic_subtract_int(&(_ni)->ni_refcnt, 1) struct ieee80211_node; int ieee80211_node_dectestref(struct ieee80211_node *ni); #define ieee80211_node_refcnt(_ni) (_ni)->ni_refcnt struct ifqueue; struct ieee80211vap; void ieee80211_drain_ifq(struct ifqueue *); void ieee80211_flush_ifq(struct ifqueue *, struct ieee80211vap *); void ieee80211_vap_destroy(struct ieee80211vap *); #define IFNET_IS_UP_RUNNING(_ifp) \ (((_ifp)->if_flags & IFF_UP) && \ ((_ifp)->if_drv_flags & IFF_DRV_RUNNING)) /* XXX TODO: cap these at 1, as hz may not be 1000 */ #define msecs_to_ticks(ms) (((ms)*hz)/1000) #define ticks_to_msecs(t) (1000*(t) / hz) #define ticks_to_secs(t) ((t) / hz) #define ieee80211_time_after(a,b) ((long)(b) - (long)(a) < 0) #define ieee80211_time_before(a,b) ieee80211_time_after(b,a) #define ieee80211_time_after_eq(a,b) ((long)(a) - (long)(b) >= 0) #define ieee80211_time_before_eq(a,b) ieee80211_time_after_eq(b,a) struct mbuf *ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen); /* tx path usage */ #define M_ENCAP M_PROTO1 /* 802.11 encap done */ #define M_EAPOL M_PROTO3 /* PAE/EAPOL frame */ #define M_PWR_SAV M_PROTO4 /* bypass PS handling */ #define M_MORE_DATA M_PROTO5 /* more data frames to follow */ #define M_FF M_PROTO6 /* fast frame / A-MSDU */ #define M_TXCB M_PROTO7 /* do tx complete callback */ #define M_AMPDU_MPDU M_PROTO8 /* ok for A-MPDU aggregation */ #define M_FRAG M_PROTO9 /* frame fragmentation */ #define M_FIRSTFRAG M_PROTO10 /* first frame fragment */ #define M_LASTFRAG M_PROTO11 /* last frame fragment */ #define M_80211_TX \ (M_ENCAP|M_EAPOL|M_PWR_SAV|M_MORE_DATA|M_FF|M_TXCB| \ M_AMPDU_MPDU|M_FRAG|M_FIRSTFRAG|M_LASTFRAG) /* rx path usage */ #define M_AMPDU M_PROTO1 /* A-MPDU subframe */ #define M_WEP M_PROTO2 /* WEP done by hardware */ #if 0 #define M_AMPDU_MPDU M_PROTO8 /* A-MPDU re-order done */ #endif #define M_80211_RX (M_AMPDU|M_WEP|M_AMPDU_MPDU) #define IEEE80211_MBUF_TX_FLAG_BITS \ M_FLAG_BITS \ "\15M_ENCAP\17M_EAPOL\20M_PWR_SAV\21M_MORE_DATA\22M_FF\23M_TXCB" \ "\24M_AMPDU_MPDU\25M_FRAG\26M_FIRSTFRAG\27M_LASTFRAG" #define IEEE80211_MBUF_RX_FLAG_BITS \ M_FLAG_BITS \ "\15M_AMPDU\16M_WEP\24M_AMPDU_MPDU" /* * Store WME access control bits in the vlan tag. * This is safe since it's done after the packet is classified * (where we use any previous tag) and because it's passed * directly in to the driver and there's no chance someone * else will clobber them on us. */ #define M_WME_SETAC(m, ac) \ ((m)->m_pkthdr.ether_vtag = (ac)) #define M_WME_GETAC(m) ((m)->m_pkthdr.ether_vtag) /* * Mbufs on the power save queue are tagged with an age and * timed out. We reuse the hardware checksum field in the * mbuf packet header to store this data. */ #define M_AGE_SET(m,v) (m->m_pkthdr.csum_data = v) #define M_AGE_GET(m) (m->m_pkthdr.csum_data) #define M_AGE_SUB(m,adj) (m->m_pkthdr.csum_data -= adj) /* * Store the sequence number. */ #define M_SEQNO_SET(m, seqno) \ ((m)->m_pkthdr.tso_segsz = (seqno)) #define M_SEQNO_GET(m) ((m)->m_pkthdr.tso_segsz) #define MTAG_ABI_NET80211 1132948340 /* net80211 ABI */ struct ieee80211_cb { void (*func)(struct ieee80211_node *, void *, int status); void *arg; }; #define NET80211_TAG_CALLBACK 0 /* xmit complete callback */ int ieee80211_add_callback(struct mbuf *m, void (*func)(struct ieee80211_node *, void *, int), void *arg); void ieee80211_process_callback(struct ieee80211_node *, struct mbuf *, int); #define NET80211_TAG_XMIT_PARAMS 1 /* See below; this is after the bpf_params definition */ #define NET80211_TAG_RECV_PARAMS 2 struct ieee80211com; int ieee80211_parent_xmitpkt(struct ieee80211com *, struct mbuf *); int ieee80211_vap_xmitpkt(struct ieee80211vap *, struct mbuf *); void get_random_bytes(void *, size_t); void ieee80211_sysctl_attach(struct ieee80211com *); void ieee80211_sysctl_detach(struct ieee80211com *); void ieee80211_sysctl_vattach(struct ieee80211vap *); void ieee80211_sysctl_vdetach(struct ieee80211vap *); SYSCTL_DECL(_net_wlan); int ieee80211_sysctl_msecs_ticks(SYSCTL_HANDLER_ARGS); void ieee80211_load_module(const char *); /* * A "policy module" is an adjunct module to net80211 that provides * functionality that typically includes policy decisions. This * modularity enables extensibility and vendor-supplied functionality. */ #define _IEEE80211_POLICY_MODULE(policy, name, version) \ typedef void (*policy##_setup)(int); \ SET_DECLARE(policy##_set, policy##_setup); \ static int \ wlan_##name##_modevent(module_t mod, int type, void *unused) \ { \ policy##_setup * const *iter, f; \ switch (type) { \ case MOD_LOAD: \ SET_FOREACH(iter, policy##_set) { \ f = (void*) *iter; \ f(type); \ } \ return 0; \ case MOD_UNLOAD: \ case MOD_QUIESCE: \ if (nrefs) { \ printf("wlan_" #name ": still in use " \ "(%u dynamic refs)\n", nrefs); \ return EBUSY; \ } \ if (type == MOD_UNLOAD) { \ SET_FOREACH(iter, policy##_set) { \ f = (void*) *iter; \ f(type); \ } \ } \ return 0; \ } \ return EINVAL; \ } \ static moduledata_t name##_mod = { \ "wlan_" #name, \ wlan_##name##_modevent, \ 0 \ }; \ DECLARE_MODULE(wlan_##name, name##_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);\ MODULE_VERSION(wlan_##name, version); \ MODULE_DEPEND(wlan_##name, wlan, 1, 1, 1) /* * Crypto modules implement cipher support. */ #define IEEE80211_CRYPTO_MODULE(name, version) \ _IEEE80211_POLICY_MODULE(crypto, name, version); \ static void \ name##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_crypto_register(&name); \ else \ ieee80211_crypto_unregister(&name); \ } \ TEXT_SET(crypto##_set, name##_modevent) /* * Scanner modules provide scanning policy. */ #define IEEE80211_SCANNER_MODULE(name, version) \ _IEEE80211_POLICY_MODULE(scanner, name, version) #define IEEE80211_SCANNER_ALG(name, alg, v) \ static void \ name##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_scanner_register(alg, &v); \ else \ ieee80211_scanner_unregister(alg, &v); \ } \ TEXT_SET(scanner_set, name##_modevent); \ /* * ACL modules implement acl policy. */ #define IEEE80211_ACL_MODULE(name, alg, version) \ _IEEE80211_POLICY_MODULE(acl, name, version); \ static void \ alg##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_aclator_register(&alg); \ else \ ieee80211_aclator_unregister(&alg); \ } \ TEXT_SET(acl_set, alg##_modevent); \ /* * Authenticator modules handle 802.1x/WPA authentication. */ #define IEEE80211_AUTH_MODULE(name, version) \ _IEEE80211_POLICY_MODULE(auth, name, version) #define IEEE80211_AUTH_ALG(name, alg, v) \ static void \ name##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_authenticator_register(alg, &v); \ else \ ieee80211_authenticator_unregister(alg); \ } \ TEXT_SET(auth_set, name##_modevent) /* * Rate control modules provide tx rate control support. */ #define IEEE80211_RATECTL_MODULE(alg, version) \ _IEEE80211_POLICY_MODULE(ratectl, alg, version); \ #define IEEE80211_RATECTL_ALG(name, alg, v) \ static void \ alg##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_ratectl_register(alg, &v); \ else \ ieee80211_ratectl_unregister(alg); \ } \ TEXT_SET(ratectl##_set, alg##_modevent) struct ieee80211req; typedef int ieee80211_ioctl_getfunc(struct ieee80211vap *, struct ieee80211req *); SET_DECLARE(ieee80211_ioctl_getset, ieee80211_ioctl_getfunc); #define IEEE80211_IOCTL_GET(_name, _get) TEXT_SET(ieee80211_ioctl_getset, _get) typedef int ieee80211_ioctl_setfunc(struct ieee80211vap *, struct ieee80211req *); SET_DECLARE(ieee80211_ioctl_setset, ieee80211_ioctl_setfunc); #define IEEE80211_IOCTL_SET(_name, _set) TEXT_SET(ieee80211_ioctl_setset, _set) #endif /* _KERNEL */ /* XXX this stuff belongs elsewhere */ /* * Message formats for messages from the net80211 layer to user * applications via the routing socket. These messages are appended * to an if_announcemsghdr structure. */ struct ieee80211_join_event { uint8_t iev_addr[6]; }; struct ieee80211_leave_event { uint8_t iev_addr[6]; }; struct ieee80211_replay_event { uint8_t iev_src[6]; /* src MAC */ uint8_t iev_dst[6]; /* dst MAC */ uint8_t iev_cipher; /* cipher type */ uint8_t iev_keyix; /* key id/index */ uint64_t iev_keyrsc; /* RSC from key */ uint64_t iev_rsc; /* RSC from frame */ }; struct ieee80211_michael_event { uint8_t iev_src[6]; /* src MAC */ uint8_t iev_dst[6]; /* dst MAC */ uint8_t iev_cipher; /* cipher type */ uint8_t iev_keyix; /* key id/index */ }; struct ieee80211_wds_event { uint8_t iev_addr[6]; }; struct ieee80211_csa_event { uint32_t iev_flags; /* channel flags */ uint16_t iev_freq; /* setting in Mhz */ uint8_t iev_ieee; /* IEEE channel number */ uint8_t iev_mode; /* CSA mode */ uint8_t iev_count; /* CSA count */ }; struct ieee80211_cac_event { uint32_t iev_flags; /* channel flags */ uint16_t iev_freq; /* setting in Mhz */ uint8_t iev_ieee; /* IEEE channel number */ /* XXX timestamp? */ uint8_t iev_type; /* IEEE80211_NOTIFY_CAC_* */ }; struct ieee80211_radar_event { uint32_t iev_flags; /* channel flags */ uint16_t iev_freq; /* setting in Mhz */ uint8_t iev_ieee; /* IEEE channel number */ /* XXX timestamp? */ }; struct ieee80211_auth_event { uint8_t iev_addr[6]; }; struct ieee80211_deauth_event { uint8_t iev_addr[6]; }; struct ieee80211_country_event { uint8_t iev_addr[6]; uint8_t iev_cc[2]; /* ISO country code */ }; struct ieee80211_radio_event { uint8_t iev_state; /* 1 on, 0 off */ }; #define RTM_IEEE80211_ASSOC 100 /* station associate (bss mode) */ #define RTM_IEEE80211_REASSOC 101 /* station re-associate (bss mode) */ #define RTM_IEEE80211_DISASSOC 102 /* station disassociate (bss mode) */ #define RTM_IEEE80211_JOIN 103 /* station join (ap mode) */ #define RTM_IEEE80211_LEAVE 104 /* station leave (ap mode) */ #define RTM_IEEE80211_SCAN 105 /* scan complete, results available */ #define RTM_IEEE80211_REPLAY 106 /* sequence counter replay detected */ #define RTM_IEEE80211_MICHAEL 107 /* Michael MIC failure detected */ #define RTM_IEEE80211_REJOIN 108 /* station re-associate (ap mode) */ #define RTM_IEEE80211_WDS 109 /* WDS discovery (ap mode) */ #define RTM_IEEE80211_CSA 110 /* Channel Switch Announcement event */ #define RTM_IEEE80211_RADAR 111 /* radar event */ #define RTM_IEEE80211_CAC 112 /* Channel Availability Check event */ #define RTM_IEEE80211_DEAUTH 113 /* station deauthenticate */ #define RTM_IEEE80211_AUTH 114 /* station authenticate (ap mode) */ #define RTM_IEEE80211_COUNTRY 115 /* discovered country code (sta mode) */ #define RTM_IEEE80211_RADIO 116 /* RF kill switch state change */ /* * Structure prepended to raw packets sent through the bpf * interface when set to DLT_IEEE802_11_RADIO. This allows * user applications to specify pretty much everything in * an Atheros tx descriptor. XXX need to generalize. * * XXX cannot be more than 14 bytes as it is copied to a sockaddr's * XXX sa_data area. */ struct ieee80211_bpf_params { uint8_t ibp_vers; /* version */ #define IEEE80211_BPF_VERSION 0 uint8_t ibp_len; /* header length in bytes */ uint8_t ibp_flags; #define IEEE80211_BPF_SHORTPRE 0x01 /* tx with short preamble */ #define IEEE80211_BPF_NOACK 0x02 /* tx with no ack */ #define IEEE80211_BPF_CRYPTO 0x04 /* tx with h/w encryption */ #define IEEE80211_BPF_FCS 0x10 /* frame incldues FCS */ #define IEEE80211_BPF_DATAPAD 0x20 /* frame includes data padding */ #define IEEE80211_BPF_RTS 0x40 /* tx with RTS/CTS */ #define IEEE80211_BPF_CTS 0x80 /* tx with CTS only */ uint8_t ibp_pri; /* WME/WMM AC+tx antenna */ uint8_t ibp_try0; /* series 1 try count */ uint8_t ibp_rate0; /* series 1 IEEE tx rate */ uint8_t ibp_power; /* tx power (device units) */ uint8_t ibp_ctsrate; /* IEEE tx rate for CTS */ uint8_t ibp_try1; /* series 2 try count */ uint8_t ibp_rate1; /* series 2 IEEE tx rate */ uint8_t ibp_try2; /* series 3 try count */ uint8_t ibp_rate2; /* series 3 IEEE tx rate */ uint8_t ibp_try3; /* series 4 try count */ uint8_t ibp_rate3; /* series 4 IEEE tx rate */ }; #ifdef _KERNEL struct ieee80211_tx_params { struct ieee80211_bpf_params params; }; int ieee80211_add_xmit_params(struct mbuf *m, const struct ieee80211_bpf_params *); int ieee80211_get_xmit_params(struct mbuf *m, struct ieee80211_bpf_params *); #define IEEE80211_MAX_CHAINS 3 #define IEEE80211_MAX_EVM_PILOTS 6 #define IEEE80211_R_NF 0x0000001 /* global NF value valid */ #define IEEE80211_R_RSSI 0x0000002 /* global RSSI value valid */ #define IEEE80211_R_C_CHAIN 0x0000004 /* RX chain count valid */ #define IEEE80211_R_C_NF 0x0000008 /* per-chain NF value valid */ #define IEEE80211_R_C_RSSI 0x0000010 /* per-chain RSSI value valid */ #define IEEE80211_R_C_EVM 0x0000020 /* per-chain EVM valid */ #define IEEE80211_R_C_HT40 0x0000040 /* RX'ed packet is 40mhz, pilots 4,5 valid */ #define IEEE80211_R_FREQ 0x0000080 /* Freq value populated, MHz */ #define IEEE80211_R_IEEE 0x0000100 /* IEEE value populated */ #define IEEE80211_R_BAND 0x0000200 /* Frequency band populated */ struct ieee80211_rx_stats { uint32_t r_flags; /* IEEE80211_R_* flags */ uint8_t c_chain; /* number of RX chains involved */ int16_t c_nf_ctl[IEEE80211_MAX_CHAINS]; /* per-chain NF */ int16_t c_nf_ext[IEEE80211_MAX_CHAINS]; /* per-chain NF */ int16_t c_rssi_ctl[IEEE80211_MAX_CHAINS]; /* per-chain RSSI */ int16_t c_rssi_ext[IEEE80211_MAX_CHAINS]; /* per-chain RSSI */ uint8_t nf; /* global NF */ uint8_t rssi; /* global RSSI */ uint8_t evm[IEEE80211_MAX_CHAINS][IEEE80211_MAX_EVM_PILOTS]; /* per-chain, per-pilot EVM values */ uint16_t c_freq; uint8_t c_ieee; }; struct ieee80211_rx_params { struct ieee80211_rx_stats params; }; int ieee80211_add_rx_params(struct mbuf *m, const struct ieee80211_rx_stats *rxs); int ieee80211_get_rx_params(struct mbuf *m, struct ieee80211_rx_stats *rxs); #endif /* _KERNEL */ /* * Malloc API. Other BSD operating systems have slightly * different malloc/free namings (eg DragonflyBSD.) */ #define IEEE80211_MALLOC malloc #define IEEE80211_FREE free /* XXX TODO: get rid of WAITOK, fix all the users of it? */ #define IEEE80211_M_NOWAIT M_NOWAIT #define IEEE80211_M_WAITOK M_WAITOK #define IEEE80211_M_ZERO M_ZERO /* XXX TODO: the type fields */ #endif /* _NET80211_IEEE80211_FREEBSD_H_ */ Index: head/sys/net80211/ieee80211_node.c =================================================================== --- head/sys/net80211/ieee80211_node.c (revision 302017) +++ head/sys/net80211/ieee80211_node.c (revision 302018) @@ -1,2837 +1,2798 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif #ifdef IEEE80211_SUPPORT_TDMA #include #endif #include #include #include #include /* * IEEE80211_NODE_HASHSIZE must be a power of 2. */ CTASSERT((IEEE80211_NODE_HASHSIZE & (IEEE80211_NODE_HASHSIZE-1)) == 0); /* * Association id's are managed with a bit vector. */ #define IEEE80211_AID_SET(_vap, b) \ ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] |= \ (1 << (IEEE80211_AID(b) % 32))) #define IEEE80211_AID_CLR(_vap, b) \ ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] &= \ ~(1 << (IEEE80211_AID(b) % 32))) #define IEEE80211_AID_ISSET(_vap, b) \ ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] & (1 << (IEEE80211_AID(b) % 32))) static int ieee80211_sta_join1(struct ieee80211_node *); static struct ieee80211_node *node_alloc(struct ieee80211vap *, const uint8_t [IEEE80211_ADDR_LEN]); static void node_cleanup(struct ieee80211_node *); static void node_free(struct ieee80211_node *); static void node_age(struct ieee80211_node *); static int8_t node_getrssi(const struct ieee80211_node *); static void node_getsignal(const struct ieee80211_node *, int8_t *, int8_t *); static void node_getmimoinfo(const struct ieee80211_node *, struct ieee80211_mimo_info *); static void _ieee80211_free_node(struct ieee80211_node *); static void node_reclaim(struct ieee80211_node_table *nt, struct ieee80211_node *ni); static void ieee80211_node_table_init(struct ieee80211com *ic, struct ieee80211_node_table *nt, const char *name, int inact, int keymaxix); static void ieee80211_node_table_reset(struct ieee80211_node_table *, struct ieee80211vap *); static void ieee80211_node_table_cleanup(struct ieee80211_node_table *nt); static void ieee80211_erp_timeout(struct ieee80211com *); MALLOC_DEFINE(M_80211_NODE, "80211node", "802.11 node state"); MALLOC_DEFINE(M_80211_NODE_IE, "80211nodeie", "802.11 node ie"); void ieee80211_node_attach(struct ieee80211com *ic) { /* XXX really want maxlen enforced per-sta */ ieee80211_ageq_init(&ic->ic_stageq, ic->ic_max_keyix * 8, "802.11 staging q"); ieee80211_node_table_init(ic, &ic->ic_sta, "station", IEEE80211_INACT_INIT, ic->ic_max_keyix); callout_init(&ic->ic_inact, 1); callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz, ieee80211_node_timeout, ic); ic->ic_node_alloc = node_alloc; ic->ic_node_free = node_free; ic->ic_node_cleanup = node_cleanup; ic->ic_node_age = node_age; ic->ic_node_drain = node_age; /* NB: same as age */ ic->ic_node_getrssi = node_getrssi; ic->ic_node_getsignal = node_getsignal; ic->ic_node_getmimoinfo = node_getmimoinfo; /* * Set flags to be propagated to all vap's; * these define default behaviour/configuration. */ ic->ic_flags_ext |= IEEE80211_FEXT_INACT; /* inactivity processing */ } void ieee80211_node_detach(struct ieee80211com *ic) { callout_drain(&ic->ic_inact); ieee80211_node_table_cleanup(&ic->ic_sta); ieee80211_ageq_cleanup(&ic->ic_stageq); } void ieee80211_node_vattach(struct ieee80211vap *vap) { /* NB: driver can override */ vap->iv_max_aid = IEEE80211_AID_DEF; /* default station inactivity timer setings */ vap->iv_inact_init = IEEE80211_INACT_INIT; vap->iv_inact_auth = IEEE80211_INACT_AUTH; vap->iv_inact_run = IEEE80211_INACT_RUN; vap->iv_inact_probe = IEEE80211_INACT_PROBE; IEEE80211_DPRINTF(vap, IEEE80211_MSG_INACT, "%s: init %u auth %u run %u probe %u\n", __func__, vap->iv_inact_init, vap->iv_inact_auth, vap->iv_inact_run, vap->iv_inact_probe); } void ieee80211_node_latevattach(struct ieee80211vap *vap) { if (vap->iv_opmode == IEEE80211_M_HOSTAP) { /* XXX should we allow max aid to be zero? */ if (vap->iv_max_aid < IEEE80211_AID_MIN) { vap->iv_max_aid = IEEE80211_AID_MIN; if_printf(vap->iv_ifp, "WARNING: max aid too small, changed to %d\n", vap->iv_max_aid); } vap->iv_aid_bitmap = (uint32_t *) IEEE80211_MALLOC( howmany(vap->iv_max_aid, 32) * sizeof(uint32_t), M_80211_NODE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); if (vap->iv_aid_bitmap == NULL) { /* XXX no way to recover */ printf("%s: no memory for AID bitmap, max aid %d!\n", __func__, vap->iv_max_aid); vap->iv_max_aid = 0; } } ieee80211_reset_bss(vap); vap->iv_auth = ieee80211_authenticator_get(vap->iv_bss->ni_authmode); } void ieee80211_node_vdetach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; ieee80211_node_table_reset(&ic->ic_sta, vap); if (vap->iv_bss != NULL) { ieee80211_free_node(vap->iv_bss); vap->iv_bss = NULL; } if (vap->iv_aid_bitmap != NULL) { IEEE80211_FREE(vap->iv_aid_bitmap, M_80211_NODE); vap->iv_aid_bitmap = NULL; } } /* * Port authorize/unauthorize interfaces for use by an authenticator. */ void ieee80211_node_authorize(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; ni->ni_flags |= IEEE80211_NODE_AUTH; ni->ni_inact_reload = vap->iv_inact_run; ni->ni_inact = ni->ni_inact_reload; IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact_reload %u", __func__, ni->ni_inact_reload); } void ieee80211_node_unauthorize(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; ni->ni_flags &= ~IEEE80211_NODE_AUTH; ni->ni_inact_reload = vap->iv_inact_auth; if (ni->ni_inact > ni->ni_inact_reload) ni->ni_inact = ni->ni_inact_reload; IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact_reload %u inact %u", __func__, ni->ni_inact_reload, ni->ni_inact); } /* * Fix tx parameters for a node according to ``association state''. */ void ieee80211_node_setuptxparms(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; enum ieee80211_phymode mode; if (ni->ni_flags & IEEE80211_NODE_HT) { if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan)) mode = IEEE80211_MODE_11NA; else mode = IEEE80211_MODE_11NG; } else { /* legacy rate handling */ if (IEEE80211_IS_CHAN_ST(ni->ni_chan)) mode = IEEE80211_MODE_STURBO_A; else if (IEEE80211_IS_CHAN_HALF(ni->ni_chan)) mode = IEEE80211_MODE_HALF; else if (IEEE80211_IS_CHAN_QUARTER(ni->ni_chan)) mode = IEEE80211_MODE_QUARTER; /* NB: 108A should be handled as 11a */ else if (IEEE80211_IS_CHAN_A(ni->ni_chan)) mode = IEEE80211_MODE_11A; else if (IEEE80211_IS_CHAN_108G(ni->ni_chan) || (ni->ni_flags & IEEE80211_NODE_ERP)) mode = IEEE80211_MODE_11G; else mode = IEEE80211_MODE_11B; } ni->ni_txparms = &vap->iv_txparms[mode]; } /* * Set/change the channel. The rate set is also updated as * to insure a consistent view by drivers. * XXX should be private but hostap needs it to deal with CSA */ void ieee80211_node_set_chan(struct ieee80211_node *ni, struct ieee80211_channel *chan) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; enum ieee80211_phymode mode; KASSERT(chan != IEEE80211_CHAN_ANYC, ("no channel")); ni->ni_chan = chan; mode = ieee80211_chan2mode(chan); if (IEEE80211_IS_CHAN_HT(chan)) { /* * We must install the legacy rate est in ni_rates and the * HT rate set in ni_htrates. */ ni->ni_htrates = *ieee80211_get_suphtrates(ic, chan); /* * Setup bss tx parameters based on operating mode. We * use legacy rates when operating in a mixed HT+non-HT bss * and non-ERP rates in 11g for mixed ERP+non-ERP bss. */ if (mode == IEEE80211_MODE_11NA && (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0) mode = IEEE80211_MODE_11A; else if (mode == IEEE80211_MODE_11NG && (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0) mode = IEEE80211_MODE_11G; if (mode == IEEE80211_MODE_11G && (vap->iv_flags & IEEE80211_F_PUREG) == 0) mode = IEEE80211_MODE_11B; } ni->ni_txparms = &vap->iv_txparms[mode]; ni->ni_rates = *ieee80211_get_suprates(ic, chan); } static __inline void copy_bss(struct ieee80211_node *nbss, const struct ieee80211_node *obss) { /* propagate useful state */ nbss->ni_authmode = obss->ni_authmode; nbss->ni_txpower = obss->ni_txpower; nbss->ni_vlan = obss->ni_vlan; /* XXX statistics? */ /* XXX legacy WDS bssid? */ } void ieee80211_create_ibss(struct ieee80211vap* vap, struct ieee80211_channel *chan) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: creating %s on channel %u%c\n", __func__, ieee80211_opmode_name[vap->iv_opmode], ieee80211_chan2ieee(ic, chan), ieee80211_channel_type_char(chan)); ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr); if (ni == NULL) { /* XXX recovery? */ return; } IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr); ni->ni_esslen = vap->iv_des_ssid[0].len; memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen); if (vap->iv_bss != NULL) copy_bss(ni, vap->iv_bss); ni->ni_intval = ic->ic_bintval; if (vap->iv_flags & IEEE80211_F_PRIVACY) ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY; if (ic->ic_phytype == IEEE80211_T_FH) { ni->ni_fhdwell = 200; /* XXX */ ni->ni_fhindex = 1; } if (vap->iv_opmode == IEEE80211_M_IBSS) { vap->iv_flags |= IEEE80211_F_SIBSS; ni->ni_capinfo |= IEEE80211_CAPINFO_IBSS; /* XXX */ if (vap->iv_flags & IEEE80211_F_DESBSSID) IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid); else { get_random_bytes(ni->ni_bssid, IEEE80211_ADDR_LEN); /* clear group bit, add local bit */ ni->ni_bssid[0] = (ni->ni_bssid[0] &~ 0x01) | 0x02; } } else if (vap->iv_opmode == IEEE80211_M_AHDEMO) { if (vap->iv_flags & IEEE80211_F_DESBSSID) IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid); else #ifdef IEEE80211_SUPPORT_TDMA if ((vap->iv_caps & IEEE80211_C_TDMA) == 0) #endif memset(ni->ni_bssid, 0, IEEE80211_ADDR_LEN); #ifdef IEEE80211_SUPPORT_MESH } else if (vap->iv_opmode == IEEE80211_M_MBSS) { ni->ni_meshidlen = vap->iv_mesh->ms_idlen; memcpy(ni->ni_meshid, vap->iv_mesh->ms_id, ni->ni_meshidlen); #endif } /* * Fix the channel and related attributes. */ /* clear DFS CAC state on previous channel */ if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && ic->ic_bsschan->ic_freq != chan->ic_freq && IEEE80211_IS_CHAN_CACDONE(ic->ic_bsschan)) ieee80211_dfs_cac_clear(ic, ic->ic_bsschan); ic->ic_bsschan = chan; ieee80211_node_set_chan(ni, chan); ic->ic_curmode = ieee80211_chan2mode(chan); /* * Do mode-specific setup. */ if (IEEE80211_IS_CHAN_FULL(chan)) { if (IEEE80211_IS_CHAN_ANYG(chan)) { /* * Use a mixed 11b/11g basic rate set. */ ieee80211_setbasicrates(&ni->ni_rates, IEEE80211_MODE_11G); if (vap->iv_flags & IEEE80211_F_PUREG) { /* * Also mark OFDM rates basic so 11b * stations do not join (WiFi compliance). */ ieee80211_addbasicrates(&ni->ni_rates, IEEE80211_MODE_11A); } } else if (IEEE80211_IS_CHAN_B(chan)) { /* * Force pure 11b rate set. */ ieee80211_setbasicrates(&ni->ni_rates, IEEE80211_MODE_11B); } } (void) ieee80211_sta_join1(ieee80211_ref_node(ni)); } /* * Reset bss state on transition to the INIT state. * Clear any stations from the table (they have been * deauth'd) and reset the bss node (clears key, rate * etc. state). */ void ieee80211_reset_bss(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni, *obss; ieee80211_node_table_reset(&ic->ic_sta, vap); /* XXX multi-bss: wrong */ ieee80211_reset_erp(ic); ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr); KASSERT(ni != NULL, ("unable to setup initial BSS node")); obss = vap->iv_bss; vap->iv_bss = ieee80211_ref_node(ni); if (obss != NULL) { copy_bss(ni, obss); ni->ni_intval = ic->ic_bintval; ieee80211_free_node(obss); } else IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr); } static int match_ssid(const struct ieee80211_node *ni, int nssid, const struct ieee80211_scan_ssid ssids[]) { int i; for (i = 0; i < nssid; i++) { if (ni->ni_esslen == ssids[i].len && memcmp(ni->ni_essid, ssids[i].ssid, ni->ni_esslen) == 0) return 1; } return 0; } /* * Test a node for suitability/compatibility. */ static int check_bss(struct ieee80211vap *vap, struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; uint8_t rate; if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan))) return 0; if (vap->iv_opmode == IEEE80211_M_IBSS) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) return 0; } else { if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0) return 0; } if (vap->iv_flags & IEEE80211_F_PRIVACY) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0) return 0; } else { /* XXX does this mean privacy is supported or required? */ if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) return 0; } rate = ieee80211_fix_rate(ni, &ni->ni_rates, IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE); if (rate & IEEE80211_RATE_BASIC) return 0; if (vap->iv_des_nssid != 0 && !match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid)) return 0; if ((vap->iv_flags & IEEE80211_F_DESBSSID) && !IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid)) return 0; return 1; } #ifdef IEEE80211_DEBUG /* * Display node suitability/compatibility. */ static void check_bss_debug(struct ieee80211vap *vap, struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; uint8_t rate; int fail; fail = 0; if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan))) fail |= 0x01; if (vap->iv_opmode == IEEE80211_M_IBSS) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) fail |= 0x02; } else { if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0) fail |= 0x02; } if (vap->iv_flags & IEEE80211_F_PRIVACY) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0) fail |= 0x04; } else { /* XXX does this mean privacy is supported or required? */ if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) fail |= 0x04; } rate = ieee80211_fix_rate(ni, &ni->ni_rates, IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE); if (rate & IEEE80211_RATE_BASIC) fail |= 0x08; if (vap->iv_des_nssid != 0 && !match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid)) fail |= 0x10; if ((vap->iv_flags & IEEE80211_F_DESBSSID) && !IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid)) fail |= 0x20; printf(" %c %s", fail ? '-' : '+', ether_sprintf(ni->ni_macaddr)); printf(" %s%c", ether_sprintf(ni->ni_bssid), fail & 0x20 ? '!' : ' '); printf(" %3d%c", ieee80211_chan2ieee(ic, ni->ni_chan), fail & 0x01 ? '!' : ' '); printf(" %2dM%c", (rate & IEEE80211_RATE_VAL) / 2, fail & 0x08 ? '!' : ' '); printf(" %4s%c", (ni->ni_capinfo & IEEE80211_CAPINFO_ESS) ? "ess" : (ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) ? "ibss" : "????", fail & 0x02 ? '!' : ' '); printf(" %3s%c ", (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) ? "wep" : "no", fail & 0x04 ? '!' : ' '); ieee80211_print_essid(ni->ni_essid, ni->ni_esslen); printf("%s\n", fail & 0x10 ? "!" : ""); } #endif /* IEEE80211_DEBUG */ int ieee80211_ibss_merge_check(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; if (ni == vap->iv_bss || IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) { /* unchanged, nothing to do */ return 0; } if (!check_bss(vap, ni)) { /* capabilities mismatch */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, "%s: merge failed, capabilities mismatch\n", __func__); #ifdef IEEE80211_DEBUG if (ieee80211_msg_assoc(vap)) check_bss_debug(vap, ni); #endif vap->iv_stats.is_ibss_capmismatch++; return 0; } return 1; } /* * Handle 802.11 ad hoc network merge. The * convention, set by the Wireless Ethernet Compatibility Alliance * (WECA), is that an 802.11 station will change its BSSID to match * the "oldest" 802.11 ad hoc network, on the same channel, that * has the station's desired SSID. The "oldest" 802.11 network * sends beacons with the greatest TSF timestamp. * * The caller is assumed to validate TSF's before attempting a merge. * * Return !0 if the BSSID changed, 0 otherwise. */ int ieee80211_ibss_merge(struct ieee80211_node *ni) { #ifdef IEEE80211_DEBUG struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; #endif if (! ieee80211_ibss_merge_check(ni)) return 0; IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, "%s: new bssid %s: %s preamble, %s slot time%s\n", __func__, ether_sprintf(ni->ni_bssid), ic->ic_flags&IEEE80211_F_SHPREAMBLE ? "short" : "long", ic->ic_flags&IEEE80211_F_SHSLOT ? "short" : "long", ic->ic_flags&IEEE80211_F_USEPROT ? ", protection" : "" ); return ieee80211_sta_join1(ieee80211_ref_node(ni)); } /* * Calculate HT channel promotion flags for all vaps. * This assumes ni_chan have been setup for each vap. */ static int gethtadjustflags(struct ieee80211com *ic) { struct ieee80211vap *vap; int flags; flags = 0; /* XXX locking */ TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { if (vap->iv_state < IEEE80211_S_RUN) continue; switch (vap->iv_opmode) { case IEEE80211_M_WDS: case IEEE80211_M_STA: case IEEE80211_M_AHDEMO: case IEEE80211_M_HOSTAP: case IEEE80211_M_IBSS: case IEEE80211_M_MBSS: flags |= ieee80211_htchanflags(vap->iv_bss->ni_chan); break; default: break; } } return flags; } /* * Check if the current channel needs to change based on whether * any vap's are using HT20/HT40. This is used to sync the state * of ic_curchan after a channel width change on a running vap. */ void ieee80211_sync_curchan(struct ieee80211com *ic) { struct ieee80211_channel *c; c = ieee80211_ht_adjust_channel(ic, ic->ic_curchan, gethtadjustflags(ic)); if (c != ic->ic_curchan) { ic->ic_curchan = c; ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan); ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan); IEEE80211_UNLOCK(ic); ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); IEEE80211_LOCK(ic); } } /* * Setup the current channel. The request channel may be * promoted if other vap's are operating with HT20/HT40. */ void ieee80211_setupcurchan(struct ieee80211com *ic, struct ieee80211_channel *c) { if (ic->ic_htcaps & IEEE80211_HTC_HT) { int flags = gethtadjustflags(ic); /* * Check for channel promotion required to support the * set of running vap's. This assumes we are called * after ni_chan is setup for each vap. */ /* NB: this assumes IEEE80211_FHT_USEHT40 > IEEE80211_FHT_HT */ if (flags > ieee80211_htchanflags(c)) c = ieee80211_ht_adjust_channel(ic, c, flags); } ic->ic_bsschan = ic->ic_curchan = c; ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan); ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan); } /* * Change the current channel. The channel change is guaranteed to have * happened before the next state change. */ void ieee80211_setcurchan(struct ieee80211com *ic, struct ieee80211_channel *c) { ieee80211_setupcurchan(ic, c); ieee80211_runtask(ic, &ic->ic_chan_task); } void ieee80211_update_chw(struct ieee80211com *ic) { ieee80211_setupcurchan(ic, ic->ic_curchan); ieee80211_runtask(ic, &ic->ic_chw_task); } /* * Join the specified IBSS/BSS network. The node is assumed to * be passed in with a held reference. */ static int ieee80211_sta_join1(struct ieee80211_node *selbs) { struct ieee80211vap *vap = selbs->ni_vap; struct ieee80211com *ic = selbs->ni_ic; struct ieee80211_node *obss; int canreassoc; /* * Committed to selbs, setup state. */ obss = vap->iv_bss; /* * Check if old+new node have the same address in which * case we can reassociate when operating in sta mode. */ canreassoc = (obss != NULL && vap->iv_state == IEEE80211_S_RUN && IEEE80211_ADDR_EQ(obss->ni_macaddr, selbs->ni_macaddr)); vap->iv_bss = selbs; /* NB: caller assumed to bump refcnt */ if (obss != NULL) { struct ieee80211_node_table *nt = obss->ni_table; copy_bss(selbs, obss); ieee80211_node_decref(obss); /* iv_bss reference */ IEEE80211_NODE_LOCK(nt); node_reclaim(nt, obss); /* station table reference */ IEEE80211_NODE_UNLOCK(nt); obss = NULL; /* NB: guard against later use */ } /* * Delete unusable rates; we've already checked * that the negotiated rate set is acceptable. */ ieee80211_fix_rate(vap->iv_bss, &vap->iv_bss->ni_rates, IEEE80211_F_DODEL | IEEE80211_F_JOIN); ieee80211_setcurchan(ic, selbs->ni_chan); /* * Set the erp state (mostly the slot time) to deal with * the auto-select case; this should be redundant if the * mode is locked. */ ieee80211_reset_erp(ic); ieee80211_wme_initparams(vap); if (vap->iv_opmode == IEEE80211_M_STA) { if (canreassoc) { /* Reassociate */ ieee80211_new_state(vap, IEEE80211_S_ASSOC, 1); } else { /* * Act as if we received a DEAUTH frame in case we * are invoked from the RUN state. This will cause * us to try to re-authenticate if we are operating * as a station. */ ieee80211_new_state(vap, IEEE80211_S_AUTH, IEEE80211_FC0_SUBTYPE_DEAUTH); } } else ieee80211_new_state(vap, IEEE80211_S_RUN, -1); return 1; } int ieee80211_sta_join(struct ieee80211vap *vap, struct ieee80211_channel *chan, const struct ieee80211_scan_entry *se) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; ni = ieee80211_alloc_node(&ic->ic_sta, vap, se->se_macaddr); if (ni == NULL) { /* XXX msg */ return 0; } /* * Expand scan state into node's format. * XXX may not need all this stuff */ IEEE80211_ADDR_COPY(ni->ni_bssid, se->se_bssid); ni->ni_esslen = se->se_ssid[1]; memcpy(ni->ni_essid, se->se_ssid+2, ni->ni_esslen); ni->ni_tstamp.tsf = se->se_tstamp.tsf; ni->ni_intval = se->se_intval; ni->ni_capinfo = se->se_capinfo; ni->ni_chan = chan; ni->ni_timoff = se->se_timoff; ni->ni_fhdwell = se->se_fhdwell; ni->ni_fhindex = se->se_fhindex; ni->ni_erp = se->se_erp; IEEE80211_RSSI_LPF(ni->ni_avgrssi, se->se_rssi); ni->ni_noise = se->se_noise; if (vap->iv_opmode == IEEE80211_M_STA) { /* NB: only infrastructure mode requires an associd */ ni->ni_flags |= IEEE80211_NODE_ASSOCID; } if (ieee80211_ies_init(&ni->ni_ies, se->se_ies.data, se->se_ies.len)) { ieee80211_ies_expand(&ni->ni_ies); #ifdef IEEE80211_SUPPORT_SUPERG if (ni->ni_ies.ath_ie != NULL) ieee80211_parse_ath(ni, ni->ni_ies.ath_ie); #endif if (ni->ni_ies.htcap_ie != NULL) ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie); if (ni->ni_ies.htinfo_ie != NULL) ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie); #ifdef IEEE80211_SUPPORT_MESH if (ni->ni_ies.meshid_ie != NULL) ieee80211_parse_meshid(ni, ni->ni_ies.meshid_ie); #endif #ifdef IEEE80211_SUPPORT_TDMA if (ni->ni_ies.tdma_ie != NULL) ieee80211_parse_tdma(ni, ni->ni_ies.tdma_ie); #endif } vap->iv_dtim_period = se->se_dtimperiod; vap->iv_dtim_count = 0; /* NB: must be after ni_chan is setup */ ieee80211_setup_rates(ni, se->se_rates, se->se_xrates, IEEE80211_F_DOSORT); if (ieee80211_iserp_rateset(&ni->ni_rates)) ni->ni_flags |= IEEE80211_NODE_ERP; /* * Setup HT state for this node if it's available, otherwise * non-STA modes won't pick this state up. * * For IBSS and related modes that don't go through an * association request/response, the only appropriate place * to setup the HT state is here. */ if (ni->ni_ies.htinfo_ie != NULL && ni->ni_ies.htcap_ie != NULL && vap->iv_flags_ht & IEEE80211_FHT_HT) { ieee80211_ht_node_init(ni); ieee80211_ht_updateparams(ni, ni->ni_ies.htcap_ie, ni->ni_ies.htinfo_ie); ieee80211_setup_htrates(ni, ni->ni_ies.htcap_ie, IEEE80211_F_JOIN | IEEE80211_F_DOBRS); ieee80211_setup_basic_htrates(ni, ni->ni_ies.htinfo_ie); } /* XXX else check for ath FF? */ /* XXX QoS? Difficult given that WME config is specific to a master */ ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); return ieee80211_sta_join1(ieee80211_ref_node(ni)); } /* * Leave the specified IBSS/BSS network. The node is assumed to * be passed in with a held reference. */ void ieee80211_sta_leave(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; ic->ic_node_cleanup(ni); ieee80211_notify_node_leave(ni); } /* * Send a deauthenticate frame and drop the station. */ void ieee80211_node_deauth(struct ieee80211_node *ni, int reason) { /* NB: bump the refcnt to be sure temporary nodes are not reclaimed */ ieee80211_ref_node(ni); if (ni->ni_associd != 0) IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, reason); ieee80211_node_leave(ni); ieee80211_free_node(ni); } static struct ieee80211_node * node_alloc(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211_node *ni; ni = (struct ieee80211_node *) IEEE80211_MALLOC(sizeof(struct ieee80211_node), M_80211_NODE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); return ni; } /* * Initialize an ie blob with the specified data. If previous * data exists re-use the data block. As a side effect we clear * all references to specific ie's; the caller is required to * recalculate them. */ int ieee80211_ies_init(struct ieee80211_ies *ies, const uint8_t *data, int len) { /* NB: assumes data+len are the last fields */ memset(ies, 0, offsetof(struct ieee80211_ies, data)); if (ies->data != NULL && ies->len != len) { /* data size changed */ IEEE80211_FREE(ies->data, M_80211_NODE_IE); ies->data = NULL; } if (ies->data == NULL) { ies->data = (uint8_t *) IEEE80211_MALLOC(len, M_80211_NODE_IE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); if (ies->data == NULL) { ies->len = 0; /* NB: pointers have already been zero'd above */ return 0; } } memcpy(ies->data, data, len); ies->len = len; return 1; } /* * Reclaim storage for an ie blob. */ void ieee80211_ies_cleanup(struct ieee80211_ies *ies) { if (ies->data != NULL) IEEE80211_FREE(ies->data, M_80211_NODE_IE); } /* * Expand an ie blob data contents and to fillin individual * ie pointers. The data blob is assumed to be well-formed; * we don't do any validity checking of ie lengths. */ void ieee80211_ies_expand(struct ieee80211_ies *ies) { uint8_t *ie; int ielen; ie = ies->data; ielen = ies->len; while (ielen > 0) { switch (ie[0]) { case IEEE80211_ELEMID_VENDOR: if (iswpaoui(ie)) ies->wpa_ie = ie; else if (iswmeoui(ie)) ies->wme_ie = ie; #ifdef IEEE80211_SUPPORT_SUPERG else if (isatherosoui(ie)) ies->ath_ie = ie; #endif #ifdef IEEE80211_SUPPORT_TDMA else if (istdmaoui(ie)) ies->tdma_ie = ie; #endif break; case IEEE80211_ELEMID_RSN: ies->rsn_ie = ie; break; case IEEE80211_ELEMID_HTCAP: ies->htcap_ie = ie; break; case IEEE80211_ELEMID_HTINFO: ies->htinfo_ie = ie; break; #ifdef IEEE80211_SUPPORT_MESH case IEEE80211_ELEMID_MESHID: ies->meshid_ie = ie; break; #endif } ielen -= 2 + ie[1]; ie += 2 + ie[1]; } } /* * Reclaim any resources in a node and reset any critical * state. Typically nodes are free'd immediately after, * but in some cases the storage may be reused so we need * to insure consistent state (should probably fix that). */ static void node_cleanup(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; int i; /* NB: preserve ni_table */ if (ni->ni_flags & IEEE80211_NODE_PWR_MGT) { if (vap->iv_opmode != IEEE80211_M_STA) vap->iv_ps_sta--; ni->ni_flags &= ~IEEE80211_NODE_PWR_MGT; IEEE80211_NOTE(vap, IEEE80211_MSG_POWER, ni, "power save mode off, %u sta's in ps mode", vap->iv_ps_sta); } /* * Cleanup any HT-related state. */ if (ni->ni_flags & IEEE80211_NODE_HT) ieee80211_ht_node_cleanup(ni); #ifdef IEEE80211_SUPPORT_SUPERG /* Always do FF node cleanup; for A-MSDU */ ieee80211_ff_node_cleanup(ni); #endif #ifdef IEEE80211_SUPPORT_MESH /* * Cleanup any mesh-related state. */ if (vap->iv_opmode == IEEE80211_M_MBSS) ieee80211_mesh_node_cleanup(ni); #endif /* * Clear any staging queue entries. */ ieee80211_ageq_drain_node(&ic->ic_stageq, ni); /* * Clear AREF flag that marks the authorization refcnt bump * has happened. This is probably not needed as the node * should always be removed from the table so not found but * do it just in case. * Likewise clear the ASSOCID flag as these flags are intended * to be managed in tandem. */ ni->ni_flags &= ~(IEEE80211_NODE_AREF | IEEE80211_NODE_ASSOCID); /* * Drain power save queue and, if needed, clear TIM. */ if (ieee80211_node_psq_drain(ni) != 0 && vap->iv_set_tim != NULL) vap->iv_set_tim(ni, 0); ni->ni_associd = 0; if (ni->ni_challenge != NULL) { IEEE80211_FREE(ni->ni_challenge, M_80211_NODE); ni->ni_challenge = NULL; } /* * Preserve SSID, WPA, and WME ie's so the bss node is * reusable during a re-auth/re-assoc state transition. * If we remove these data they will not be recreated * because they come from a probe-response or beacon frame * which cannot be expected prior to the association-response. * This should not be an issue when operating in other modes * as stations leaving always go through a full state transition * which will rebuild this state. * * XXX does this leave us open to inheriting old state? */ for (i = 0; i < nitems(ni->ni_rxfrag); i++) if (ni->ni_rxfrag[i] != NULL) { m_freem(ni->ni_rxfrag[i]); ni->ni_rxfrag[i] = NULL; } /* * Must be careful here to remove any key map entry w/o a LOR. */ ieee80211_node_delucastkey(ni); } static void node_free(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; ieee80211_ratectl_node_deinit(ni); ic->ic_node_cleanup(ni); ieee80211_ies_cleanup(&ni->ni_ies); ieee80211_psq_cleanup(&ni->ni_psq); IEEE80211_FREE(ni, M_80211_NODE); } static void node_age(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; - IEEE80211_NODE_LOCK_ASSERT(&vap->iv_ic->ic_sta); - /* * Age frames on the power save queue. */ if (ieee80211_node_psq_age(ni) != 0 && ni->ni_psq.psq_len == 0 && vap->iv_set_tim != NULL) vap->iv_set_tim(ni, 0); /* * Age out HT resources (e.g. frames on the * A-MPDU reorder queues). */ if (ni->ni_associd != 0 && (ni->ni_flags & IEEE80211_NODE_HT)) ieee80211_ht_node_age(ni); } static int8_t node_getrssi(const struct ieee80211_node *ni) { uint32_t avgrssi = ni->ni_avgrssi; int32_t rssi; if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER) return 0; rssi = IEEE80211_RSSI_GET(avgrssi); return rssi < 0 ? 0 : rssi > 127 ? 127 : rssi; } static void node_getsignal(const struct ieee80211_node *ni, int8_t *rssi, int8_t *noise) { *rssi = node_getrssi(ni); *noise = ni->ni_noise; } static void node_getmimoinfo(const struct ieee80211_node *ni, struct ieee80211_mimo_info *info) { int i; uint32_t avgrssi; int32_t rssi; bzero(info, sizeof(*info)); for (i = 0; i < ni->ni_mimo_chains; i++) { avgrssi = ni->ni_mimo_rssi_ctl[i]; if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER) { info->rssi[i] = 0; } else { rssi = IEEE80211_RSSI_GET(avgrssi); info->rssi[i] = rssi < 0 ? 0 : rssi > 127 ? 127 : rssi; } info->noise[i] = ni->ni_mimo_noise_ctl[i]; } /* XXX ext radios? */ /* XXX EVM? */ } struct ieee80211_node * ieee80211_alloc_node(struct ieee80211_node_table *nt, struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic = nt->nt_ic; struct ieee80211_node *ni; int hash; ni = ic->ic_node_alloc(vap, macaddr); if (ni == NULL) { vap->iv_stats.is_rx_nodealloc++; return NULL; } IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "%s %p<%s> in %s table\n", __func__, ni, ether_sprintf(macaddr), nt->nt_name); IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr); hash = IEEE80211_NODE_HASH(ic, macaddr); ieee80211_node_initref(ni); /* mark referenced */ ni->ni_chan = IEEE80211_CHAN_ANYC; ni->ni_authmode = IEEE80211_AUTH_OPEN; ni->ni_txpower = ic->ic_txpowlimit; /* max power */ ni->ni_txparms = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey, IEEE80211_KEYIX_NONE); ni->ni_avgrssi = IEEE80211_RSSI_DUMMY_MARKER; ni->ni_inact_reload = nt->nt_inact_init; ni->ni_inact = ni->ni_inact_reload; ni->ni_ath_defkeyix = 0x7fff; ieee80211_psq_init(&ni->ni_psq, "unknown"); #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) ieee80211_mesh_node_init(vap, ni); #endif IEEE80211_NODE_LOCK(nt); TAILQ_INSERT_TAIL(&nt->nt_node, ni, ni_list); LIST_INSERT_HEAD(&nt->nt_hash[hash], ni, ni_hash); ni->ni_table = nt; ni->ni_vap = vap; ni->ni_ic = ic; IEEE80211_NODE_UNLOCK(nt); IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact_reload %u", __func__, ni->ni_inact_reload); ieee80211_ratectl_node_init(ni); return ni; } /* * Craft a temporary node suitable for sending a management frame * to the specified station. We craft only as much state as we * need to do the work since the node will be immediately reclaimed * once the send completes. */ struct ieee80211_node * ieee80211_tmp_node(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; ni = ic->ic_node_alloc(vap, macaddr); if (ni != NULL) { struct ieee80211_node *bss = vap->iv_bss; IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "%s %p<%s>\n", __func__, ni, ether_sprintf(macaddr)); ni->ni_table = NULL; /* NB: pedantic */ ni->ni_ic = ic; /* NB: needed to set channel */ ni->ni_vap = vap; IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr); IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid); ieee80211_node_initref(ni); /* mark referenced */ /* NB: required by ieee80211_fix_rate */ ieee80211_node_set_chan(ni, bss->ni_chan); ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey, IEEE80211_KEYIX_NONE); ni->ni_txpower = bss->ni_txpower; /* XXX optimize away */ ieee80211_psq_init(&ni->ni_psq, "unknown"); ieee80211_ratectl_node_init(ni); } else { /* XXX msg */ vap->iv_stats.is_rx_nodealloc++; } return ni; } struct ieee80211_node * ieee80211_dup_bss(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; ni = ieee80211_alloc_node(&ic->ic_sta, vap, macaddr); if (ni != NULL) { struct ieee80211_node *bss = vap->iv_bss; /* * Inherit from iv_bss. */ copy_bss(ni, bss); IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid); ieee80211_node_set_chan(ni, bss->ni_chan); } return ni; } /* * Create a bss node for a legacy WDS vap. The far end does * not associate so we just create create a new node and * simulate an association. The caller is responsible for * installing the node as the bss node and handling any further * setup work like authorizing the port. */ struct ieee80211_node * ieee80211_node_create_wds(struct ieee80211vap *vap, const uint8_t bssid[IEEE80211_ADDR_LEN], struct ieee80211_channel *chan) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; /* XXX check if node already in sta table? */ ni = ieee80211_alloc_node(&ic->ic_sta, vap, bssid); if (ni != NULL) { ni->ni_wdsvap = vap; IEEE80211_ADDR_COPY(ni->ni_bssid, bssid); /* * Inherit any manually configured settings. */ copy_bss(ni, vap->iv_bss); ieee80211_node_set_chan(ni, chan); /* NB: propagate ssid so available to WPA supplicant */ ni->ni_esslen = vap->iv_des_ssid[0].len; memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen); /* NB: no associd for peer */ /* * There are no management frames to use to * discover neighbor capabilities, so blindly * propagate the local configuration. */ if (vap->iv_flags & IEEE80211_F_WME) ni->ni_flags |= IEEE80211_NODE_QOS; #ifdef IEEE80211_SUPPORT_SUPERG if (vap->iv_flags & IEEE80211_F_FF) ni->ni_flags |= IEEE80211_NODE_FF; #endif if ((ic->ic_htcaps & IEEE80211_HTC_HT) && (vap->iv_flags_ht & IEEE80211_FHT_HT)) { /* * Device is HT-capable and HT is enabled for * the vap; setup HT operation. On return * ni_chan will be adjusted to an HT channel. */ ieee80211_ht_wds_init(ni); } else { struct ieee80211_channel *c = ni->ni_chan; /* * Force a legacy channel to be used. */ c = ieee80211_find_channel(ic, c->ic_freq, c->ic_flags &~ IEEE80211_CHAN_HT); KASSERT(c != NULL, ("no legacy channel, %u/%x", ni->ni_chan->ic_freq, ni->ni_chan->ic_flags)); ni->ni_chan = c; } } return ni; } struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_node_locked_debug(struct ieee80211_node_table *nt, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) #else ieee80211_find_node_locked(struct ieee80211_node_table *nt, const uint8_t macaddr[IEEE80211_ADDR_LEN]) #endif { struct ieee80211_node *ni; int hash; IEEE80211_NODE_LOCK_ASSERT(nt); hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr); LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) { if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) { ieee80211_ref_node(ni); /* mark referenced */ #ifdef IEEE80211_DEBUG_REFCNT IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); #endif return ni; } } return NULL; } struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_node_debug(struct ieee80211_node_table *nt, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) #else ieee80211_find_node(struct ieee80211_node_table *nt, const uint8_t macaddr[IEEE80211_ADDR_LEN]) #endif { struct ieee80211_node *ni; IEEE80211_NODE_LOCK(nt); ni = ieee80211_find_node_locked(nt, macaddr); IEEE80211_NODE_UNLOCK(nt); return ni; } struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_vap_node_locked_debug(struct ieee80211_node_table *nt, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) #else ieee80211_find_vap_node_locked(struct ieee80211_node_table *nt, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) #endif { struct ieee80211_node *ni; int hash; IEEE80211_NODE_LOCK_ASSERT(nt); hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr); LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) { if (ni->ni_vap == vap && IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) { ieee80211_ref_node(ni); /* mark referenced */ #ifdef IEEE80211_DEBUG_REFCNT IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); #endif return ni; } } return NULL; } struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_vap_node_debug(struct ieee80211_node_table *nt, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) #else ieee80211_find_vap_node(struct ieee80211_node_table *nt, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) #endif { struct ieee80211_node *ni; IEEE80211_NODE_LOCK(nt); ni = ieee80211_find_vap_node_locked(nt, vap, macaddr); IEEE80211_NODE_UNLOCK(nt); return ni; } /* * Fake up a node; this handles node discovery in adhoc mode. * Note that for the driver's benefit we we treat this like * an association so the driver has an opportunity to setup * it's private state. */ struct ieee80211_node * ieee80211_fakeup_adhoc_node(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211_node *ni; IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE | IEEE80211_MSG_ASSOC, "%s: mac<%s>\n", __func__, ether_sprintf(macaddr)); ni = ieee80211_dup_bss(vap, macaddr); if (ni != NULL) { struct ieee80211com *ic = vap->iv_ic; /* XXX no rate negotiation; just dup */ ni->ni_rates = vap->iv_bss->ni_rates; if (ieee80211_iserp_rateset(&ni->ni_rates)) ni->ni_flags |= IEEE80211_NODE_ERP; if (vap->iv_opmode == IEEE80211_M_AHDEMO) { /* * In adhoc demo mode there are no management * frames to use to discover neighbor capabilities, * so blindly propagate the local configuration * so we can do interesting things (e.g. use * WME to disable ACK's). */ if (vap->iv_flags & IEEE80211_F_WME) ni->ni_flags |= IEEE80211_NODE_QOS; #ifdef IEEE80211_SUPPORT_SUPERG if (vap->iv_flags & IEEE80211_F_FF) ni->ni_flags |= IEEE80211_NODE_FF; #endif } ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); if (ic->ic_newassoc != NULL) ic->ic_newassoc(ni, 1); /* XXX not right for 802.1x/WPA */ ieee80211_node_authorize(ni); } return ni; } void ieee80211_init_neighbor(struct ieee80211_node *ni, const struct ieee80211_frame *wh, const struct ieee80211_scanparams *sp) { int do_ht_setup = 0; ni->ni_esslen = sp->ssid[1]; memcpy(ni->ni_essid, sp->ssid + 2, sp->ssid[1]); IEEE80211_ADDR_COPY(ni->ni_bssid, wh->i_addr3); memcpy(ni->ni_tstamp.data, sp->tstamp, sizeof(ni->ni_tstamp)); ni->ni_intval = sp->bintval; ni->ni_capinfo = sp->capinfo; ni->ni_chan = ni->ni_ic->ic_curchan; ni->ni_fhdwell = sp->fhdwell; ni->ni_fhindex = sp->fhindex; ni->ni_erp = sp->erp; ni->ni_timoff = sp->timoff; #ifdef IEEE80211_SUPPORT_MESH if (ni->ni_vap->iv_opmode == IEEE80211_M_MBSS) ieee80211_mesh_init_neighbor(ni, wh, sp); #endif if (ieee80211_ies_init(&ni->ni_ies, sp->ies, sp->ies_len)) { ieee80211_ies_expand(&ni->ni_ies); if (ni->ni_ies.wme_ie != NULL) ni->ni_flags |= IEEE80211_NODE_QOS; else ni->ni_flags &= ~IEEE80211_NODE_QOS; #ifdef IEEE80211_SUPPORT_SUPERG if (ni->ni_ies.ath_ie != NULL) ieee80211_parse_ath(ni, ni->ni_ies.ath_ie); #endif if (ni->ni_ies.htcap_ie != NULL) ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie); if (ni->ni_ies.htinfo_ie != NULL) ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie); if ((ni->ni_ies.htcap_ie != NULL) && (ni->ni_ies.htinfo_ie != NULL) && (ni->ni_vap->iv_flags_ht & IEEE80211_FHT_HT)) { do_ht_setup = 1; } } /* NB: must be after ni_chan is setup */ ieee80211_setup_rates(ni, sp->rates, sp->xrates, IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE | IEEE80211_F_DONEGO | IEEE80211_F_DODEL); /* * If the neighbor is HT compatible, flip that on. */ if (do_ht_setup) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: doing HT setup\n", __func__); ieee80211_ht_node_init(ni); ieee80211_ht_updateparams(ni, ni->ni_ies.htcap_ie, ni->ni_ies.htinfo_ie); ieee80211_setup_htrates(ni, ni->ni_ies.htcap_ie, IEEE80211_F_JOIN | IEEE80211_F_DOBRS); ieee80211_setup_basic_htrates(ni, ni->ni_ies.htinfo_ie); ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); } } /* * Do node discovery in adhoc mode on receipt of a beacon * or probe response frame. Note that for the driver's * benefit we we treat this like an association so the * driver has an opportunity to setup it's private state. */ struct ieee80211_node * ieee80211_add_neighbor(struct ieee80211vap *vap, const struct ieee80211_frame *wh, const struct ieee80211_scanparams *sp) { struct ieee80211_node *ni; IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, "%s: mac<%s>\n", __func__, ether_sprintf(wh->i_addr2)); ni = ieee80211_dup_bss(vap, wh->i_addr2);/* XXX alloc_node? */ if (ni != NULL) { struct ieee80211com *ic = vap->iv_ic; ieee80211_init_neighbor(ni, wh, sp); if (ieee80211_iserp_rateset(&ni->ni_rates)) ni->ni_flags |= IEEE80211_NODE_ERP; ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); if (ic->ic_newassoc != NULL) ic->ic_newassoc(ni, 1); /* XXX not right for 802.1x/WPA */ ieee80211_node_authorize(ni); } return ni; } #define IS_PROBEREQ(wh) \ ((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK|IEEE80211_FC0_SUBTYPE_MASK)) \ == (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ)) #define IS_BCAST_PROBEREQ(wh) \ (IS_PROBEREQ(wh) && IEEE80211_IS_MULTICAST( \ ((const struct ieee80211_frame *)(wh))->i_addr3)) static __inline struct ieee80211_node * _find_rxnode(struct ieee80211_node_table *nt, const struct ieee80211_frame_min *wh) { if (IS_BCAST_PROBEREQ(wh)) return NULL; /* spam bcast probe req to all vap's */ return ieee80211_find_node_locked(nt, wh->i_addr2); } /* * Locate the node for sender, track state, and then pass the * (referenced) node up to the 802.11 layer for its use. Note * we can return NULL if the sender is not in the table. */ struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_rxnode_debug(struct ieee80211com *ic, const struct ieee80211_frame_min *wh, const char *func, int line) #else ieee80211_find_rxnode(struct ieee80211com *ic, const struct ieee80211_frame_min *wh) #endif { struct ieee80211_node_table *nt; struct ieee80211_node *ni; nt = &ic->ic_sta; IEEE80211_NODE_LOCK(nt); ni = _find_rxnode(nt, wh); IEEE80211_NODE_UNLOCK(nt); return ni; } /* * Like ieee80211_find_rxnode but use the supplied h/w * key index as a hint to locate the node in the key * mapping table. If an entry is present at the key * index we return it; otherwise do a normal lookup and * update the mapping table if the station has a unicast * key assigned to it. */ struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_rxnode_withkey_debug(struct ieee80211com *ic, const struct ieee80211_frame_min *wh, ieee80211_keyix keyix, const char *func, int line) #else ieee80211_find_rxnode_withkey(struct ieee80211com *ic, const struct ieee80211_frame_min *wh, ieee80211_keyix keyix) #endif { struct ieee80211_node_table *nt; struct ieee80211_node *ni; nt = &ic->ic_sta; IEEE80211_NODE_LOCK(nt); if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax) ni = nt->nt_keyixmap[keyix]; else ni = NULL; if (ni == NULL) { ni = _find_rxnode(nt, wh); if (ni != NULL && nt->nt_keyixmap != NULL) { /* * If the station has a unicast key cache slot * assigned update the key->node mapping table. */ keyix = ni->ni_ucastkey.wk_rxkeyix; /* XXX can keyixmap[keyix] != NULL? */ if (keyix < nt->nt_keyixmax && nt->nt_keyixmap[keyix] == NULL) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: add key map entry %p<%s> refcnt %d\n", __func__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); nt->nt_keyixmap[keyix] = ieee80211_ref_node(ni); } } } else { if (IS_BCAST_PROBEREQ(wh)) ni = NULL; /* spam bcast probe req to all vap's */ else ieee80211_ref_node(ni); } IEEE80211_NODE_UNLOCK(nt); return ni; } #undef IS_BCAST_PROBEREQ #undef IS_PROBEREQ /* * Return a reference to the appropriate node for sending * a data frame. This handles node discovery in adhoc networks. */ struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_txnode_debug(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) #else ieee80211_find_txnode(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) #endif { struct ieee80211_node_table *nt = &vap->iv_ic->ic_sta; struct ieee80211_node *ni; /* * The destination address should be in the node table * unless this is a multicast/broadcast frame. We can * also optimize station mode operation, all frames go * to the bss node. */ /* XXX can't hold lock across dup_bss 'cuz of recursive locking */ IEEE80211_NODE_LOCK(nt); if (vap->iv_opmode == IEEE80211_M_STA || vap->iv_opmode == IEEE80211_M_WDS || IEEE80211_IS_MULTICAST(macaddr)) ni = ieee80211_ref_node(vap->iv_bss); else ni = ieee80211_find_node_locked(nt, macaddr); IEEE80211_NODE_UNLOCK(nt); if (ni == NULL) { if (vap->iv_opmode == IEEE80211_M_IBSS || vap->iv_opmode == IEEE80211_M_AHDEMO) { /* * In adhoc mode cons up a node for the destination. * Note that we need an additional reference for the * caller to be consistent with * ieee80211_find_node_locked. */ ni = ieee80211_fakeup_adhoc_node(vap, macaddr); if (ni != NULL) (void) ieee80211_ref_node(ni); } else { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, macaddr, "no node, discard frame (%s)", __func__); vap->iv_stats.is_tx_nonode++; } } return ni; } static void _ieee80211_free_node(struct ieee80211_node *ni) { struct ieee80211_node_table *nt = ni->ni_table; /* * NB: careful about referencing the vap as it may be * gone if the last reference was held by a driver. * We know the com will always be present so it's safe * to use ni_ic below to reclaim resources. */ #if 0 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "%s %p<%s> in %s table\n", __func__, ni, ether_sprintf(ni->ni_macaddr), nt != NULL ? nt->nt_name : ""); #endif if (ni->ni_associd != 0) { struct ieee80211vap *vap = ni->ni_vap; if (vap->iv_aid_bitmap != NULL) IEEE80211_AID_CLR(vap, ni->ni_associd); } if (nt != NULL) { TAILQ_REMOVE(&nt->nt_node, ni, ni_list); LIST_REMOVE(ni, ni_hash); } ni->ni_ic->ic_node_free(ni); } /* * Clear any entry in the unicast key mapping table. */ static int node_clear_keyixmap(struct ieee80211_node_table *nt, struct ieee80211_node *ni) { ieee80211_keyix keyix; keyix = ni->ni_ucastkey.wk_rxkeyix; if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax && nt->nt_keyixmap[keyix] == ni) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: %p<%s> clear key map entry %u\n", __func__, ni, ether_sprintf(ni->ni_macaddr), keyix); nt->nt_keyixmap[keyix] = NULL; ieee80211_node_decref(ni); return 1; } return 0; } void #ifdef IEEE80211_DEBUG_REFCNT ieee80211_free_node_debug(struct ieee80211_node *ni, const char *func, int line) #else ieee80211_free_node(struct ieee80211_node *ni) #endif { struct ieee80211_node_table *nt = ni->ni_table; #ifdef IEEE80211_DEBUG_REFCNT IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)-1); #endif if (nt != NULL) { IEEE80211_NODE_LOCK(nt); if (ieee80211_node_dectestref(ni)) { /* * Last reference, reclaim state. */ _ieee80211_free_node(ni); } else if (ieee80211_node_refcnt(ni) == 1) if (node_clear_keyixmap(nt, ni)) _ieee80211_free_node(ni); IEEE80211_NODE_UNLOCK(nt); } else { if (ieee80211_node_dectestref(ni)) _ieee80211_free_node(ni); } } /* * Reclaim a unicast key and clear any key cache state. */ int ieee80211_node_delucastkey(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211_node_table *nt = &ic->ic_sta; struct ieee80211_node *nikey; ieee80211_keyix keyix; int isowned, status; /* * NB: We must beware of LOR here; deleting the key * can cause the crypto layer to block traffic updates * which can generate a LOR against the node table lock; * grab it here and stash the key index for our use below. * * Must also beware of recursion on the node table lock. * When called from node_cleanup we may already have * the node table lock held. Unfortunately there's no * way to separate out this path so we must do this * conditionally. */ isowned = IEEE80211_NODE_IS_LOCKED(nt); if (!isowned) IEEE80211_NODE_LOCK(nt); nikey = NULL; status = 1; /* NB: success */ if (ni->ni_ucastkey.wk_keyix != IEEE80211_KEYIX_NONE) { keyix = ni->ni_ucastkey.wk_rxkeyix; status = ieee80211_crypto_delkey(ni->ni_vap, &ni->ni_ucastkey); if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax) { nikey = nt->nt_keyixmap[keyix]; nt->nt_keyixmap[keyix] = NULL; } } if (!isowned) IEEE80211_NODE_UNLOCK(nt); if (nikey != NULL) { KASSERT(nikey == ni, ("key map out of sync, ni %p nikey %p", ni, nikey)); IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: delete key map entry %p<%s> refcnt %d\n", __func__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)-1); ieee80211_free_node(ni); } return status; } /* * Reclaim a node. If this is the last reference count then * do the normal free work. Otherwise remove it from the node * table and mark it gone by clearing the back-reference. */ static void node_reclaim(struct ieee80211_node_table *nt, struct ieee80211_node *ni) { IEEE80211_NODE_LOCK_ASSERT(nt); IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: remove %p<%s> from %s table, refcnt %d\n", __func__, ni, ether_sprintf(ni->ni_macaddr), nt->nt_name, ieee80211_node_refcnt(ni)-1); /* * Clear any entry in the unicast key mapping table. * We need to do it here so rx lookups don't find it * in the mapping table even if it's not in the hash * table. We cannot depend on the mapping table entry * being cleared because the node may not be free'd. */ (void)node_clear_keyixmap(nt, ni); if (!ieee80211_node_dectestref(ni)) { /* * Other references are present, just remove the * node from the table so it cannot be found. When * the references are dropped storage will be * reclaimed. */ TAILQ_REMOVE(&nt->nt_node, ni, ni_list); LIST_REMOVE(ni, ni_hash); ni->ni_table = NULL; /* clear reference */ } else _ieee80211_free_node(ni); } /* * Node table support. */ static void ieee80211_node_table_init(struct ieee80211com *ic, struct ieee80211_node_table *nt, const char *name, int inact, int keyixmax) { nt->nt_ic = ic; IEEE80211_NODE_LOCK_INIT(nt, ic->ic_name); - IEEE80211_NODE_ITERATE_LOCK_INIT(nt, ic->ic_name); TAILQ_INIT(&nt->nt_node); nt->nt_name = name; - nt->nt_scangen = 1; nt->nt_inact_init = inact; nt->nt_keyixmax = keyixmax; if (nt->nt_keyixmax > 0) { nt->nt_keyixmap = (struct ieee80211_node **) IEEE80211_MALLOC( keyixmax * sizeof(struct ieee80211_node *), M_80211_NODE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); if (nt->nt_keyixmap == NULL) ic_printf(ic, "Cannot allocate key index map with %u entries\n", keyixmax); } else nt->nt_keyixmap = NULL; } static void ieee80211_node_table_reset(struct ieee80211_node_table *nt, struct ieee80211vap *match) { struct ieee80211_node *ni, *next; IEEE80211_NODE_LOCK(nt); TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next) { if (match != NULL && ni->ni_vap != match) continue; /* XXX can this happen? if so need's work */ if (ni->ni_associd != 0) { struct ieee80211vap *vap = ni->ni_vap; if (vap->iv_auth->ia_node_leave != NULL) vap->iv_auth->ia_node_leave(ni); if (vap->iv_aid_bitmap != NULL) IEEE80211_AID_CLR(vap, ni->ni_associd); } ni->ni_wdsvap = NULL; /* clear reference */ node_reclaim(nt, ni); } if (match != NULL && match->iv_opmode == IEEE80211_M_WDS) { /* * Make a separate pass to clear references to this vap * held by DWDS entries. They will not be matched above * because ni_vap will point to the ap vap but we still * need to clear ni_wdsvap when the WDS vap is destroyed * and/or reset. */ TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next) if (ni->ni_wdsvap == match) ni->ni_wdsvap = NULL; } IEEE80211_NODE_UNLOCK(nt); } static void ieee80211_node_table_cleanup(struct ieee80211_node_table *nt) { ieee80211_node_table_reset(nt, NULL); if (nt->nt_keyixmap != NULL) { #ifdef DIAGNOSTIC /* XXX verify all entries are NULL */ int i; for (i = 0; i < nt->nt_keyixmax; i++) if (nt->nt_keyixmap[i] != NULL) printf("%s: %s[%u] still active\n", __func__, nt->nt_name, i); #endif IEEE80211_FREE(nt->nt_keyixmap, M_80211_NODE); nt->nt_keyixmap = NULL; } - IEEE80211_NODE_ITERATE_LOCK_DESTROY(nt); IEEE80211_NODE_LOCK_DESTROY(nt); } -/* - * Timeout inactive stations and do related housekeeping. - * Note that we cannot hold the node lock while sending a - * frame as this would lead to a LOR. Instead we use a - * generation number to mark nodes that we've scanned and - * drop the lock and restart a scan if we have to time out - * a node. Since we are single-threaded by virtue of - * controlling the inactivity timer we can be sure this will - * process each node only once. - */ static void -ieee80211_timeout_stations(struct ieee80211com *ic) +timeout_stations(void *arg __unused, struct ieee80211_node *ni) { - struct ieee80211_node_table *nt = &ic->ic_sta; - struct ieee80211vap *vap; - struct ieee80211_node *ni; - int gen = 0; + struct ieee80211com *ic = ni->ni_ic; + struct ieee80211vap *vap = ni->ni_vap; - IEEE80211_NODE_ITERATE_LOCK(nt); - gen = ++nt->nt_scangen; -restart: - IEEE80211_NODE_LOCK(nt); - TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { - if (ni->ni_scangen == gen) /* previously handled */ - continue; - ni->ni_scangen = gen; + /* + * Only process stations when in RUN state. This + * insures, for example, that we don't timeout an + * inactive station during CAC. Note that CSA state + * is actually handled in ieee80211_node_timeout as + * it applies to more than timeout processing. + */ + if (vap->iv_state != IEEE80211_S_RUN) + return; + /* + * Ignore entries for which have yet to receive an + * authentication frame. These are transient and + * will be reclaimed when the last reference to them + * goes away (when frame xmits complete). + */ + if ((vap->iv_opmode == IEEE80211_M_HOSTAP || + vap->iv_opmode == IEEE80211_M_STA) && + (ni->ni_flags & IEEE80211_NODE_AREF) == 0) + return; + /* + * Free fragment if not needed anymore + * (last fragment older than 1s). + * XXX doesn't belong here, move to node_age + */ + if (ni->ni_rxfrag[0] != NULL && + ticks > ni->ni_rxfragstamp + hz) { + m_freem(ni->ni_rxfrag[0]); + ni->ni_rxfrag[0] = NULL; + } + if (ni->ni_inact > 0) { + ni->ni_inact--; + IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, + "%s: inact %u inact_reload %u nrates %u", + __func__, ni->ni_inact, ni->ni_inact_reload, + ni->ni_rates.rs_nrates); + } + /* + * Special case ourself; we may be idle for extended periods + * of time and regardless reclaiming our state is wrong. + * XXX run ic_node_age + */ + /* XXX before inact decrement? */ + if (ni == vap->iv_bss) + return; + if (ni->ni_associd != 0 || + (vap->iv_opmode == IEEE80211_M_IBSS || + vap->iv_opmode == IEEE80211_M_AHDEMO)) { /* - * Ignore entries for which have yet to receive an - * authentication frame. These are transient and - * will be reclaimed when the last reference to them - * goes away (when frame xmits complete). + * Age/drain resources held by the station. */ - vap = ni->ni_vap; + ic->ic_node_age(ni); /* - * Only process stations when in RUN state. This - * insures, for example, that we don't timeout an - * inactive station during CAC. Note that CSA state - * is actually handled in ieee80211_node_timeout as - * it applies to more than timeout processing. + * Probe the station before time it out. We + * send a null data frame which may not be + * universally supported by drivers (need it + * for ps-poll support so it should be...). + * + * XXX don't probe the station unless we've + * received a frame from them (and have + * some idea of the rates they are capable + * of); this will get fixed more properly + * soon with better handling of the rate set. */ - if (vap->iv_state != IEEE80211_S_RUN) - continue; - /* XXX can vap be NULL? */ - if ((vap->iv_opmode == IEEE80211_M_HOSTAP || - vap->iv_opmode == IEEE80211_M_STA) && - (ni->ni_flags & IEEE80211_NODE_AREF) == 0) - continue; - /* - * Free fragment if not needed anymore - * (last fragment older than 1s). - * XXX doesn't belong here, move to node_age - */ - if (ni->ni_rxfrag[0] != NULL && - ticks > ni->ni_rxfragstamp + hz) { - m_freem(ni->ni_rxfrag[0]); - ni->ni_rxfrag[0] = NULL; - } - if (ni->ni_inact > 0) { - ni->ni_inact--; - IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, - "%s: inact %u inact_reload %u nrates %u", - __func__, ni->ni_inact, ni->ni_inact_reload, - ni->ni_rates.rs_nrates); - } - /* - * Special case ourself; we may be idle for extended periods - * of time and regardless reclaiming our state is wrong. - * XXX run ic_node_age - */ - if (ni == vap->iv_bss) - continue; - if (ni->ni_associd != 0 || - (vap->iv_opmode == IEEE80211_M_IBSS || - vap->iv_opmode == IEEE80211_M_AHDEMO)) { - /* - * Age/drain resources held by the station. - */ - ic->ic_node_age(ni); - /* - * Probe the station before time it out. We - * send a null data frame which may not be - * universally supported by drivers (need it - * for ps-poll support so it should be...). - * - * XXX don't probe the station unless we've - * received a frame from them (and have - * some idea of the rates they are capable - * of); this will get fixed more properly - * soon with better handling of the rate set. - */ - if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) && - (0 < ni->ni_inact && - ni->ni_inact <= vap->iv_inact_probe) && - ni->ni_rates.rs_nrates != 0) { - IEEE80211_NOTE(vap, - IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, - ni, "%s", - "probe station due to inactivity"); - /* - * Grab a reference before unlocking the table - * so the node cannot be reclaimed before we - * send the frame. ieee80211_send_nulldata - * understands we've done this and reclaims the - * ref for us as needed. - */ - ieee80211_ref_node(ni); - IEEE80211_NODE_UNLOCK(nt); - ieee80211_send_nulldata(ni); - /* XXX stat? */ - goto restart; - } - } if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) && - ni->ni_inact <= 0) { + (0 < ni->ni_inact && + ni->ni_inact <= vap->iv_inact_probe) && + ni->ni_rates.rs_nrates != 0) { IEEE80211_NOTE(vap, - IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, ni, - "station timed out due to inactivity " - "(refcnt %u)", ieee80211_node_refcnt(ni)); + IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, + ni, "%s", + "probe station due to inactivity"); /* - * Send a deauthenticate frame and drop the station. - * This is somewhat complicated due to reference counts - * and locking. At this point a station will typically - * have a reference count of 1. ieee80211_node_leave - * will do a "free" of the node which will drop the - * reference count. But in the meantime a reference - * wil be held by the deauth frame. The actual reclaim - * of the node will happen either after the tx is - * completed or by ieee80211_node_leave. - * - * Separately we must drop the node lock before sending - * in case the driver takes a lock, as this can result - * in a LOR between the node lock and the driver lock. + * Grab a reference so the node cannot + * be reclaimed before we send the frame. + * ieee80211_send_nulldata understands + * we've done this and reclaims the + * ref for us as needed. */ + /* XXX fix this (not required anymore). */ ieee80211_ref_node(ni); - IEEE80211_NODE_UNLOCK(nt); - if (ni->ni_associd != 0) { - IEEE80211_SEND_MGMT(ni, - IEEE80211_FC0_SUBTYPE_DEAUTH, - IEEE80211_REASON_AUTH_EXPIRE); - } - ieee80211_node_leave(ni); - ieee80211_free_node(ni); - vap->iv_stats.is_node_timeout++; - goto restart; + /* XXX useless */ + ieee80211_send_nulldata(ni); + /* XXX stat? */ + return; } } - IEEE80211_NODE_UNLOCK(nt); + if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) && + ni->ni_inact <= 0) { + IEEE80211_NOTE(vap, + IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, ni, + "station timed out due to inactivity " + "(refcnt %u)", ieee80211_node_refcnt(ni)); + /* + * Send a deauthenticate frame and drop the station. + * This is somewhat complicated due to reference counts + * and locking. At this point a station will typically + * have a reference count of 2. ieee80211_node_leave + * will do a "free" of the node which will drop the + * reference count. But in the meantime a reference + * wil be held by the deauth frame. The actual reclaim + * of the node will happen either after the tx is + * completed or by ieee80211_node_leave. + */ + if (ni->ni_associd != 0) { + IEEE80211_SEND_MGMT(ni, + IEEE80211_FC0_SUBTYPE_DEAUTH, + IEEE80211_REASON_AUTH_EXPIRE); + } + ieee80211_node_leave(ni); + vap->iv_stats.is_node_timeout++; + } +} - IEEE80211_NODE_ITERATE_UNLOCK(nt); +/* + * Timeout inactive stations and do related housekeeping. + */ +static void +ieee80211_timeout_stations(struct ieee80211com *ic) +{ + struct ieee80211_node_table *nt = &ic->ic_sta; + + ieee80211_iterate_nodes(nt, timeout_stations, NULL); } /* * Aggressively reclaim resources. This should be used * only in a critical situation to reclaim mbuf resources. */ void ieee80211_drain(struct ieee80211com *ic) { struct ieee80211_node_table *nt = &ic->ic_sta; struct ieee80211vap *vap; struct ieee80211_node *ni; IEEE80211_NODE_LOCK(nt); TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { /* * Ignore entries for which have yet to receive an * authentication frame. These are transient and * will be reclaimed when the last reference to them * goes away (when frame xmits complete). */ vap = ni->ni_vap; /* * Only process stations when in RUN state. This * insures, for example, that we don't timeout an * inactive station during CAC. Note that CSA state * is actually handled in ieee80211_node_timeout as * it applies to more than timeout processing. */ if (vap->iv_state != IEEE80211_S_RUN) continue; /* XXX can vap be NULL? */ if ((vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_STA) && (ni->ni_flags & IEEE80211_NODE_AREF) == 0) continue; /* * Free fragments. * XXX doesn't belong here, move to node_drain */ if (ni->ni_rxfrag[0] != NULL) { m_freem(ni->ni_rxfrag[0]); ni->ni_rxfrag[0] = NULL; } /* * Drain resources held by the station. */ ic->ic_node_drain(ni); } IEEE80211_NODE_UNLOCK(nt); } /* * Per-ieee80211com inactivity timer callback. */ void ieee80211_node_timeout(void *arg) { struct ieee80211com *ic = arg; /* * Defer timeout processing if a channel switch is pending. * We typically need to be mute so not doing things that * might generate frames is good to handle in one place. * Suppressing the station timeout processing may extend the * lifetime of inactive stations (by not decrementing their * idle counters) but this should be ok unless the CSA is * active for an unusually long time. */ if ((ic->ic_flags & IEEE80211_F_CSAPENDING) == 0) { ieee80211_scan_timeout(ic); ieee80211_timeout_stations(ic); ieee80211_ageq_age(&ic->ic_stageq, IEEE80211_INACT_WAIT); IEEE80211_LOCK(ic); ieee80211_erp_timeout(ic); ieee80211_ht_timeout(ic); IEEE80211_UNLOCK(ic); } callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz, ieee80211_node_timeout, ic); } /* * Iterate over the node table and return an array of ref'ed nodes. * * This is separated out from calling the actual node function so that * no LORs will occur. * * If there are too many nodes (ie, the number of nodes doesn't fit * within 'max_aid' entries) then the node references will be freed * and an error will be returned. * * The responsibility of allocating and freeing "ni_arr" is up to * the caller. */ int ieee80211_iterate_nt(struct ieee80211_node_table *nt, struct ieee80211_node **ni_arr, uint16_t max_aid) { - u_int gen; int i, j, ret; struct ieee80211_node *ni; - IEEE80211_NODE_ITERATE_LOCK(nt); IEEE80211_NODE_LOCK(nt); - gen = ++nt->nt_scangen; i = ret = 0; - - /* - * We simply assume here that since the node - * scan generation doesn't change (as - * we are holding both the node table and - * node table iteration locks), we can simply - * assign it to the node here. - */ TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { if (i >= max_aid) { ret = E2BIG; ic_printf(nt->nt_ic, "Node array overflow: max=%u", max_aid); break; } ni_arr[i] = ieee80211_ref_node(ni); - ni_arr[i]->ni_scangen = gen; i++; } /* * It's safe to unlock here. * * If we're successful, the list is returned. * If we're unsuccessful, the list is ignored * and we remove our references. * * This avoids any potential LOR with * ieee80211_free_node(). */ IEEE80211_NODE_UNLOCK(nt); - IEEE80211_NODE_ITERATE_UNLOCK(nt); /* * If ret is non-zero, we hit some kind of error. * Rather than walking some nodes, we'll walk none * of them. */ if (ret) { for (j = 0; j < i; j++) { /* ieee80211_free_node() locks by itself */ ieee80211_free_node(ni_arr[j]); } } return (ret); } /* * Just a wrapper, so we don't have to change every ieee80211_iterate_nodes() * reference in the source. * * Note that this fetches 'max_aid' from the first VAP, rather than finding * the largest max_aid from all VAPs. */ void ieee80211_iterate_nodes(struct ieee80211_node_table *nt, ieee80211_iter_func *f, void *arg) { struct ieee80211_node **ni_arr; size_t size; int i; uint16_t max_aid; struct ieee80211vap *vap; /* Overdoing it default */ max_aid = IEEE80211_AID_MAX; /* Handle the case of there being no vaps just yet */ vap = TAILQ_FIRST(&nt->nt_ic->ic_vaps); if (vap != NULL) max_aid = vap->iv_max_aid; size = max_aid * sizeof(struct ieee80211_node *); ni_arr = (struct ieee80211_node **) IEEE80211_MALLOC(size, M_80211_NODE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); if (ni_arr == NULL) return; /* * If this fails, the node table won't have any * valid entries - ieee80211_iterate_nt() frees * the references to them. So don't try walking * the table; just skip to the end and free the * temporary memory. */ if (ieee80211_iterate_nt(nt, ni_arr, max_aid) != 0) goto done; for (i = 0; i < max_aid; i++) { if (ni_arr[i] == NULL) /* end of the list */ break; (*f)(arg, ni_arr[i]); /* ieee80211_free_node() locks by itself */ ieee80211_free_node(ni_arr[i]); } done: IEEE80211_FREE(ni_arr, M_80211_NODE); } void ieee80211_dump_node(struct ieee80211_node_table *nt, struct ieee80211_node *ni) { printf("0x%p: mac %s refcnt %d\n", ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); - printf("\tscangen %u authmode %u flags 0x%x\n", - ni->ni_scangen, ni->ni_authmode, ni->ni_flags); + printf("\tauthmode %u flags 0x%x\n", + ni->ni_authmode, ni->ni_flags); printf("\tassocid 0x%x txpower %u vlan %u\n", ni->ni_associd, ni->ni_txpower, ni->ni_vlan); printf("\ttxseq %u rxseq %u fragno %u rxfragstamp %u\n", ni->ni_txseqs[IEEE80211_NONQOS_TID], ni->ni_rxseqs[IEEE80211_NONQOS_TID] >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[IEEE80211_NONQOS_TID] & IEEE80211_SEQ_FRAG_MASK, ni->ni_rxfragstamp); printf("\trssi %d noise %d intval %u capinfo 0x%x\n", node_getrssi(ni), ni->ni_noise, ni->ni_intval, ni->ni_capinfo); printf("\tbssid %s essid \"%.*s\" channel %u:0x%x\n", ether_sprintf(ni->ni_bssid), ni->ni_esslen, ni->ni_essid, ni->ni_chan->ic_freq, ni->ni_chan->ic_flags); printf("\tinact %u inact_reload %u txrate %u\n", ni->ni_inact, ni->ni_inact_reload, ni->ni_txrate); printf("\thtcap %x htparam %x htctlchan %u ht2ndchan %u\n", ni->ni_htcap, ni->ni_htparam, ni->ni_htctlchan, ni->ni_ht2ndchan); printf("\thtopmode %x htstbc %x chw %u\n", ni->ni_htopmode, ni->ni_htstbc, ni->ni_chw); } void ieee80211_dump_nodes(struct ieee80211_node_table *nt) { ieee80211_iterate_nodes(nt, (ieee80211_iter_func *) ieee80211_dump_node, nt); } static void ieee80211_notify_erp_locked(struct ieee80211com *ic) { struct ieee80211vap *vap; IEEE80211_LOCK_ASSERT(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_opmode == IEEE80211_M_HOSTAP) ieee80211_beacon_notify(vap, IEEE80211_BEACON_ERP); } void ieee80211_notify_erp(struct ieee80211com *ic) { IEEE80211_LOCK(ic); ieee80211_notify_erp_locked(ic); IEEE80211_UNLOCK(ic); } /* * Handle a station joining an 11g network. */ static void ieee80211_node_join_11g(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; IEEE80211_LOCK_ASSERT(ic); /* * Station isn't capable of short slot time. Bump * the count of long slot time stations and disable * use of short slot time. Note that the actual switch * over to long slot time use may not occur until the * next beacon transmission (per sec. 7.3.1.4 of 11g). */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) { ic->ic_longslotsta++; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "station needs long slot time, count %d", ic->ic_longslotsta); /* XXX vap's w/ conflicting needs won't work */ if (!IEEE80211_IS_CHAN_108G(ic->ic_bsschan)) { /* * Don't force slot time when switched to turbo * mode as non-ERP stations won't be present; this * need only be done when on the normal G channel. */ ieee80211_set_shortslottime(ic, 0); } } /* * If the new station is not an ERP station * then bump the counter and enable protection * if configured. */ if (!ieee80211_iserp_rateset(&ni->ni_rates)) { ic->ic_nonerpsta++; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "station is !ERP, %d non-ERP stations associated", ic->ic_nonerpsta); /* * If station does not support short preamble * then we must enable use of Barker preamble. */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE) == 0) { IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "%s", "station needs long preamble"); ic->ic_flags |= IEEE80211_F_USEBARKER; ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE; } /* * If protection is configured and this is the first * indication we should use protection, enable it. */ if (ic->ic_protmode != IEEE80211_PROT_NONE && ic->ic_nonerpsta == 1 && (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: enable use of protection\n", __func__); ic->ic_flags |= IEEE80211_F_USEPROT; ieee80211_notify_erp_locked(ic); } } else ni->ni_flags |= IEEE80211_NODE_ERP; } void ieee80211_node_join(struct ieee80211_node *ni, int resp) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; int newassoc; if (ni->ni_associd == 0) { uint16_t aid; KASSERT(vap->iv_aid_bitmap != NULL, ("no aid bitmap")); /* * It would be good to search the bitmap * more efficiently, but this will do for now. */ for (aid = 1; aid < vap->iv_max_aid; aid++) { if (!IEEE80211_AID_ISSET(vap, aid)) break; } if (aid >= vap->iv_max_aid) { IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_TOOMANY); ieee80211_node_leave(ni); return; } ni->ni_associd = aid | 0xc000; ni->ni_jointime = time_uptime; IEEE80211_LOCK(ic); IEEE80211_AID_SET(vap, ni->ni_associd); vap->iv_sta_assoc++; ic->ic_sta_assoc++; if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan)) ieee80211_ht_node_join(ni); if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) && IEEE80211_IS_CHAN_FULL(ic->ic_bsschan)) ieee80211_node_join_11g(ni); IEEE80211_UNLOCK(ic); newassoc = 1; } else newassoc = 0; IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni, "station associated at aid %d: %s preamble, %s slot time%s%s%s%s%s%s%s%s", IEEE80211_NODE_AID(ni), ic->ic_flags & IEEE80211_F_SHPREAMBLE ? "short" : "long", ic->ic_flags & IEEE80211_F_SHSLOT ? "short" : "long", ic->ic_flags & IEEE80211_F_USEPROT ? ", protection" : "", ni->ni_flags & IEEE80211_NODE_QOS ? ", QoS" : "", ni->ni_flags & IEEE80211_NODE_HT ? (ni->ni_chw == 40 ? ", HT40" : ", HT20") : "", ni->ni_flags & IEEE80211_NODE_AMPDU ? " (+AMPDU)" : "", ni->ni_flags & IEEE80211_NODE_MIMO_RTS ? " (+SMPS-DYN)" : ni->ni_flags & IEEE80211_NODE_MIMO_PS ? " (+SMPS)" : "", ni->ni_flags & IEEE80211_NODE_RIFS ? " (+RIFS)" : "", IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF) ? ", fast-frames" : "", IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_TURBOP) ? ", turbo" : "" ); ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); /* give driver a chance to setup state like ni_txrate */ if (ic->ic_newassoc != NULL) ic->ic_newassoc(ni, newassoc); IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_SUCCESS); /* tell the authenticator about new station */ if (vap->iv_auth->ia_node_join != NULL) vap->iv_auth->ia_node_join(ni); ieee80211_notify_node_join(ni, resp == IEEE80211_FC0_SUBTYPE_ASSOC_RESP); } static void disable_protection(struct ieee80211com *ic) { KASSERT(ic->ic_nonerpsta == 0 && (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0, ("%d non ERP stations, flags 0x%x", ic->ic_nonerpsta, ic->ic_flags_ext)); ic->ic_flags &= ~IEEE80211_F_USEPROT; /* XXX verify mode? */ if (ic->ic_caps & IEEE80211_C_SHPREAMBLE) { ic->ic_flags |= IEEE80211_F_SHPREAMBLE; ic->ic_flags &= ~IEEE80211_F_USEBARKER; } ieee80211_notify_erp_locked(ic); } /* * Handle a station leaving an 11g network. */ static void ieee80211_node_leave_11g(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; IEEE80211_LOCK_ASSERT(ic); KASSERT(IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan), ("not in 11g, bss %u:0x%x", ic->ic_bsschan->ic_freq, ic->ic_bsschan->ic_flags)); /* * If a long slot station do the slot time bookkeeping. */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) { KASSERT(ic->ic_longslotsta > 0, ("bogus long slot station count %d", ic->ic_longslotsta)); ic->ic_longslotsta--; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "long slot time station leaves, count now %d", ic->ic_longslotsta); if (ic->ic_longslotsta == 0) { /* * Re-enable use of short slot time if supported * and not operating in IBSS mode (per spec). */ if ((ic->ic_caps & IEEE80211_C_SHSLOT) && ic->ic_opmode != IEEE80211_M_IBSS) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: re-enable use of short slot time\n", __func__); ieee80211_set_shortslottime(ic, 1); } } } /* * If a non-ERP station do the protection-related bookkeeping. */ if ((ni->ni_flags & IEEE80211_NODE_ERP) == 0) { KASSERT(ic->ic_nonerpsta > 0, ("bogus non-ERP station count %d", ic->ic_nonerpsta)); ic->ic_nonerpsta--; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "non-ERP station leaves, count now %d%s", ic->ic_nonerpsta, (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) ? " (non-ERP sta present)" : ""); if (ic->ic_nonerpsta == 0 && (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: disable use of protection\n", __func__); disable_protection(ic); } } } /* * Time out presence of an overlapping bss with non-ERP * stations. When operating in hostap mode we listen for * beacons from other stations and if we identify a non-ERP * station is present we enable protection. To identify * when all non-ERP stations are gone we time out this * condition. */ static void ieee80211_erp_timeout(struct ieee80211com *ic) { IEEE80211_LOCK_ASSERT(ic); if ((ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) && ieee80211_time_after(ticks, ic->ic_lastnonerp + IEEE80211_NONERP_PRESENT_AGE)) { #if 0 IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni, "%s", "age out non-ERP sta present on channel"); #endif ic->ic_flags_ext &= ~IEEE80211_FEXT_NONERP_PR; if (ic->ic_nonerpsta == 0) disable_protection(ic); } } /* * Handle bookkeeping for station deauthentication/disassociation * when operating as an ap. */ void ieee80211_node_leave(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_node_table *nt = ni->ni_table; IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni, "station with aid %d leaves", IEEE80211_NODE_AID(ni)); KASSERT(vap->iv_opmode != IEEE80211_M_STA, ("unexpected operating mode %u", vap->iv_opmode)); /* * If node wasn't previously associated all * we need to do is reclaim the reference. */ /* XXX ibss mode bypasses 11g and notification */ if (ni->ni_associd == 0) goto done; /* * Tell the authenticator the station is leaving. * Note that we must do this before yanking the * association id as the authenticator uses the * associd to locate it's state block. */ if (vap->iv_auth->ia_node_leave != NULL) vap->iv_auth->ia_node_leave(ni); IEEE80211_LOCK(ic); IEEE80211_AID_CLR(vap, ni->ni_associd); vap->iv_sta_assoc--; ic->ic_sta_assoc--; if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan)) ieee80211_ht_node_leave(ni); if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) && IEEE80211_IS_CHAN_FULL(ic->ic_bsschan)) ieee80211_node_leave_11g(ni); IEEE80211_UNLOCK(ic); /* * Cleanup station state. In particular clear various * state that might otherwise be reused if the node * is reused before the reference count goes to zero * (and memory is reclaimed). */ ieee80211_sta_leave(ni); done: /* * Remove the node from any table it's recorded in and * drop the caller's reference. Removal from the table * is important to insure the node is not reprocessed * for inactivity. */ if (nt != NULL) { IEEE80211_NODE_LOCK(nt); node_reclaim(nt, ni); IEEE80211_NODE_UNLOCK(nt); } else ieee80211_free_node(ni); } struct rssiinfo { struct ieee80211vap *vap; int rssi_samples; uint32_t rssi_total; }; static void get_hostap_rssi(void *arg, struct ieee80211_node *ni) { struct rssiinfo *info = arg; struct ieee80211vap *vap = ni->ni_vap; int8_t rssi; if (info->vap != vap) return; /* only associated stations */ if (ni->ni_associd == 0) return; rssi = vap->iv_ic->ic_node_getrssi(ni); if (rssi != 0) { info->rssi_samples++; info->rssi_total += rssi; } } static void get_adhoc_rssi(void *arg, struct ieee80211_node *ni) { struct rssiinfo *info = arg; struct ieee80211vap *vap = ni->ni_vap; int8_t rssi; if (info->vap != vap) return; /* only neighbors */ /* XXX check bssid */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) return; rssi = vap->iv_ic->ic_node_getrssi(ni); if (rssi != 0) { info->rssi_samples++; info->rssi_total += rssi; } } #ifdef IEEE80211_SUPPORT_MESH static void get_mesh_rssi(void *arg, struct ieee80211_node *ni) { struct rssiinfo *info = arg; struct ieee80211vap *vap = ni->ni_vap; int8_t rssi; if (info->vap != vap) return; /* only neighbors that peered successfully */ if (ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED) return; rssi = vap->iv_ic->ic_node_getrssi(ni); if (rssi != 0) { info->rssi_samples++; info->rssi_total += rssi; } } #endif /* IEEE80211_SUPPORT_MESH */ int8_t ieee80211_getrssi(struct ieee80211vap *vap) { #define NZ(x) ((x) == 0 ? 1 : (x)) struct ieee80211com *ic = vap->iv_ic; struct rssiinfo info; info.rssi_total = 0; info.rssi_samples = 0; info.vap = vap; switch (vap->iv_opmode) { case IEEE80211_M_IBSS: /* average of all ibss neighbors */ case IEEE80211_M_AHDEMO: /* average of all neighbors */ ieee80211_iterate_nodes(&ic->ic_sta, get_adhoc_rssi, &info); break; case IEEE80211_M_HOSTAP: /* average of all associated stations */ ieee80211_iterate_nodes(&ic->ic_sta, get_hostap_rssi, &info); break; #ifdef IEEE80211_SUPPORT_MESH case IEEE80211_M_MBSS: /* average of all mesh neighbors */ ieee80211_iterate_nodes(&ic->ic_sta, get_mesh_rssi, &info); break; #endif case IEEE80211_M_MONITOR: /* XXX */ case IEEE80211_M_STA: /* use stats from associated ap */ default: if (vap->iv_bss != NULL) info.rssi_total = ic->ic_node_getrssi(vap->iv_bss); info.rssi_samples = 1; break; } return info.rssi_total / NZ(info.rssi_samples); #undef NZ } void ieee80211_getsignal(struct ieee80211vap *vap, int8_t *rssi, int8_t *noise) { if (vap->iv_bss == NULL) /* NB: shouldn't happen */ return; vap->iv_ic->ic_node_getsignal(vap->iv_bss, rssi, noise); /* for non-station mode return avg'd rssi accounting */ if (vap->iv_opmode != IEEE80211_M_STA) *rssi = ieee80211_getrssi(vap); } Index: head/sys/net80211/ieee80211_node.h =================================================================== --- head/sys/net80211/ieee80211_node.h (revision 302017) +++ head/sys/net80211/ieee80211_node.h (revision 302018) @@ -1,470 +1,467 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_NODE_H_ #define _NET80211_IEEE80211_NODE_H_ #include /* for ieee80211_nodestats */ #include /* for aggregation state */ /* * Each ieee80211com instance has a single timer that fires every * IEEE80211_INACT_WAIT seconds to handle "inactivity processing". * This is used to do node inactivity processing when operating * as an AP, adhoc or mesh mode. For inactivity processing each node * has a timeout set in it's ni_inact field that is decremented * on each timeout and the node is reclaimed when the counter goes * to zero. We use different inactivity timeout values depending * on whether the node is associated and authorized (either by * 802.1x or open/shared key authentication) or associated but yet * to be authorized. The latter timeout is shorter to more aggressively * reclaim nodes that leave part way through the 802.1x exchange. */ #define IEEE80211_INACT_WAIT 15 /* inactivity interval (secs) */ #define IEEE80211_INACT_INIT (30/IEEE80211_INACT_WAIT) /* initial */ #define IEEE80211_INACT_AUTH (180/IEEE80211_INACT_WAIT) /* associated but not authorized */ #define IEEE80211_INACT_RUN (300/IEEE80211_INACT_WAIT) /* authorized */ #define IEEE80211_INACT_PROBE (30/IEEE80211_INACT_WAIT) /* probe */ #define IEEE80211_INACT_SCAN (300/IEEE80211_INACT_WAIT) /* scanned */ #define IEEE80211_TRANS_WAIT 2 /* mgt frame tx timer (secs) */ /* threshold for aging overlapping non-ERP bss */ #define IEEE80211_NONERP_PRESENT_AGE msecs_to_ticks(60*1000) #define IEEE80211_NODE_HASHSIZE 32 /* NB: hash size must be pow2 */ /* simple hash is enough for variation of macaddr */ #define IEEE80211_NODE_HASH(ic, addr) \ (((const uint8_t *)(addr))[IEEE80211_ADDR_LEN - 1] % \ IEEE80211_NODE_HASHSIZE) struct ieee80211_node_table; struct ieee80211com; struct ieee80211vap; /* * Information element ``blob''. We use this structure * to capture management frame payloads that need to be * retained. Information elements within the payload that * we need to consult have references recorded. */ struct ieee80211_ies { /* the following are either NULL or point within data */ uint8_t *wpa_ie; /* captured WPA ie */ uint8_t *rsn_ie; /* captured RSN ie */ uint8_t *wme_ie; /* captured WME ie */ uint8_t *ath_ie; /* captured Atheros ie */ uint8_t *htcap_ie; /* captured HTCAP ie */ uint8_t *htinfo_ie; /* captured HTINFO ie */ uint8_t *tdma_ie; /* captured TDMA ie */ uint8_t *meshid_ie; /* captured MESH ID ie */ uint8_t *spare[4]; /* NB: these must be the last members of this structure */ uint8_t *data; /* frame data > 802.11 header */ int len; /* data size in bytes */ }; /* * 802.11s (Mesh) Peer Link FSM state. */ enum ieee80211_mesh_mlstate { IEEE80211_NODE_MESH_IDLE = 0, IEEE80211_NODE_MESH_OPENSNT = 1, /* open frame sent */ IEEE80211_NODE_MESH_OPENRCV = 2, /* open frame received */ IEEE80211_NODE_MESH_CONFIRMRCV = 3, /* confirm frame received */ IEEE80211_NODE_MESH_ESTABLISHED = 4, /* link established */ IEEE80211_NODE_MESH_HOLDING = 5, /* link closing */ }; #define IEEE80211_MESH_MLSTATE_BITS \ "\20\1IDLE\2OPENSNT\2OPENRCV\3CONFIRMRCV\4ESTABLISHED\5HOLDING" /* * Node specific information. Note that drivers are expected * to derive from this structure to add device-specific per-node * state. This is done by overriding the ic_node_* methods in * the ieee80211com structure. */ struct ieee80211_node { struct ieee80211vap *ni_vap; /* associated vap */ struct ieee80211com *ni_ic; /* copy from vap to save deref*/ struct ieee80211_node_table *ni_table; /* NB: may be NULL */ TAILQ_ENTRY(ieee80211_node) ni_list; /* list of all nodes */ LIST_ENTRY(ieee80211_node) ni_hash; /* hash collision list */ u_int ni_refcnt; /* count of held references */ - u_int ni_scangen; /* gen# for timeout scan */ u_int ni_flags; #define IEEE80211_NODE_AUTH 0x000001 /* authorized for data */ #define IEEE80211_NODE_QOS 0x000002 /* QoS enabled */ #define IEEE80211_NODE_ERP 0x000004 /* ERP enabled */ /* NB: this must have the same value as IEEE80211_FC1_PWR_MGT */ #define IEEE80211_NODE_PWR_MGT 0x000010 /* power save mode enabled */ #define IEEE80211_NODE_AREF 0x000020 /* authentication ref held */ #define IEEE80211_NODE_HT 0x000040 /* HT enabled */ #define IEEE80211_NODE_HTCOMPAT 0x000080 /* HT setup w/ vendor OUI's */ #define IEEE80211_NODE_WPS 0x000100 /* WPS association */ #define IEEE80211_NODE_TSN 0x000200 /* TSN association */ #define IEEE80211_NODE_AMPDU_RX 0x000400 /* AMPDU rx enabled */ #define IEEE80211_NODE_AMPDU_TX 0x000800 /* AMPDU tx enabled */ #define IEEE80211_NODE_MIMO_PS 0x001000 /* MIMO power save enabled */ #define IEEE80211_NODE_MIMO_RTS 0x002000 /* send RTS in MIMO PS */ #define IEEE80211_NODE_RIFS 0x004000 /* RIFS enabled */ #define IEEE80211_NODE_SGI20 0x008000 /* Short GI in HT20 enabled */ #define IEEE80211_NODE_SGI40 0x010000 /* Short GI in HT40 enabled */ #define IEEE80211_NODE_ASSOCID 0x020000 /* xmit requires associd */ #define IEEE80211_NODE_AMSDU_RX 0x040000 /* AMSDU rx enabled */ #define IEEE80211_NODE_AMSDU_TX 0x080000 /* AMSDU tx enabled */ uint16_t ni_associd; /* association ID */ uint16_t ni_vlan; /* vlan tag */ uint16_t ni_txpower; /* current transmit power */ uint8_t ni_authmode; /* authentication algorithm */ uint8_t ni_ath_flags; /* Atheros feature flags */ /* NB: These must have the same values as IEEE80211_ATHC_* */ #define IEEE80211_NODE_TURBOP 0x0001 /* Turbo prime enable */ #define IEEE80211_NODE_COMP 0x0002 /* Compresssion enable */ #define IEEE80211_NODE_FF 0x0004 /* Fast Frame capable */ #define IEEE80211_NODE_XR 0x0008 /* Atheros WME enable */ #define IEEE80211_NODE_AR 0x0010 /* AR capable */ #define IEEE80211_NODE_BOOST 0x0080 /* Dynamic Turbo boosted */ uint16_t ni_ath_defkeyix;/* Atheros def key index */ const struct ieee80211_txparam *ni_txparms; uint32_t ni_jointime; /* time of join (secs) */ uint32_t *ni_challenge; /* shared-key challenge */ struct ieee80211_ies ni_ies; /* captured ie's */ /* tx seq per-tid */ ieee80211_seq ni_txseqs[IEEE80211_TID_SIZE]; /* rx seq previous per-tid*/ ieee80211_seq ni_rxseqs[IEEE80211_TID_SIZE]; uint32_t ni_rxfragstamp; /* time stamp of last rx frag */ struct mbuf *ni_rxfrag[3]; /* rx frag reassembly */ struct ieee80211_key ni_ucastkey; /* unicast key */ /* hardware */ uint32_t ni_avgrssi; /* recv ssi state */ int8_t ni_noise; /* noise floor */ /* mimo statistics */ uint32_t ni_mimo_rssi_ctl[IEEE80211_MAX_CHAINS]; uint32_t ni_mimo_rssi_ext[IEEE80211_MAX_CHAINS]; uint8_t ni_mimo_noise_ctl[IEEE80211_MAX_CHAINS]; uint8_t ni_mimo_noise_ext[IEEE80211_MAX_CHAINS]; uint8_t ni_mimo_chains; /* header */ uint8_t ni_macaddr[IEEE80211_ADDR_LEN]; uint8_t ni_bssid[IEEE80211_ADDR_LEN]; /* beacon, probe response */ union { uint8_t data[8]; u_int64_t tsf; } ni_tstamp; /* from last rcv'd beacon */ uint16_t ni_intval; /* beacon interval */ uint16_t ni_capinfo; /* capabilities */ uint8_t ni_esslen; uint8_t ni_essid[IEEE80211_NWID_LEN]; struct ieee80211_rateset ni_rates; /* negotiated rate set */ struct ieee80211_channel *ni_chan; uint16_t ni_fhdwell; /* FH only */ uint8_t ni_fhindex; /* FH only */ uint16_t ni_erp; /* ERP from beacon/probe resp */ uint16_t ni_timoff; /* byte offset to TIM ie */ uint8_t ni_dtim_period; /* DTIM period */ uint8_t ni_dtim_count; /* DTIM count for last bcn */ /* 11s state */ uint8_t ni_meshidlen; uint8_t ni_meshid[IEEE80211_MESHID_LEN]; enum ieee80211_mesh_mlstate ni_mlstate; /* peering management state */ uint16_t ni_mllid; /* link local ID */ uint16_t ni_mlpid; /* link peer ID */ struct callout ni_mltimer; /* link mesh timer */ uint8_t ni_mlrcnt; /* link mesh retry counter */ uint8_t ni_mltval; /* link mesh timer value */ struct callout ni_mlhtimer; /* link mesh backoff timer */ uint8_t ni_mlhcnt; /* link mesh holding counter */ /* 11n state */ uint16_t ni_htcap; /* HT capabilities */ uint8_t ni_htparam; /* HT params */ uint8_t ni_htctlchan; /* HT control channel */ uint8_t ni_ht2ndchan; /* HT 2nd channel */ uint8_t ni_htopmode; /* HT operating mode */ uint8_t ni_htstbc; /* HT */ uint8_t ni_chw; /* negotiated channel width */ struct ieee80211_htrateset ni_htrates; /* negotiated ht rate set */ struct ieee80211_tx_ampdu ni_tx_ampdu[WME_NUM_TID]; struct ieee80211_rx_ampdu ni_rx_ampdu[WME_NUM_TID]; /* fast-frames state */ struct mbuf * ni_tx_superg[WME_NUM_TID]; /* others */ short ni_inact; /* inactivity mark count */ short ni_inact_reload;/* inactivity reload value */ int ni_txrate; /* legacy rate/MCS */ struct ieee80211_psq ni_psq; /* power save queue */ struct ieee80211_nodestats ni_stats; /* per-node statistics */ struct ieee80211vap *ni_wdsvap; /* associated WDS vap */ void *ni_rctls; /* private ratectl state */ uint64_t ni_spare[3]; }; MALLOC_DECLARE(M_80211_NODE); MALLOC_DECLARE(M_80211_NODE_IE); #define IEEE80211_NODE_ATH (IEEE80211_NODE_FF | IEEE80211_NODE_TURBOP) #define IEEE80211_NODE_AMPDU \ (IEEE80211_NODE_AMPDU_RX | IEEE80211_NODE_AMPDU_TX) #define IEEE80211_NODE_AMSDU \ (IEEE80211_NODE_AMSDU_RX | IEEE80211_NODE_AMSDU_TX) #define IEEE80211_NODE_HT_ALL \ (IEEE80211_NODE_HT | IEEE80211_NODE_HTCOMPAT | \ IEEE80211_NODE_AMPDU | IEEE80211_NODE_AMSDU | \ IEEE80211_NODE_MIMO_PS | IEEE80211_NODE_MIMO_RTS | \ IEEE80211_NODE_RIFS | IEEE80211_NODE_SGI20 | IEEE80211_NODE_SGI40) #define IEEE80211_NODE_BITS \ "\20\1AUTH\2QOS\3ERP\5PWR_MGT\6AREF\7HT\10HTCOMPAT\11WPS\12TSN" \ "\13AMPDU_RX\14AMPDU_TX\15MIMO_PS\16MIMO_RTS\17RIFS\20SGI20\21SGI40" \ "\22ASSOCID" #define IEEE80211_NODE_AID(ni) IEEE80211_AID(ni->ni_associd) #define IEEE80211_NODE_STAT(ni,stat) (ni->ni_stats.ns_##stat++) #define IEEE80211_NODE_STAT_ADD(ni,stat,v) (ni->ni_stats.ns_##stat += v) #define IEEE80211_NODE_STAT_SET(ni,stat,v) (ni->ni_stats.ns_##stat = v) /* * Filtered rssi calculation support. The receive rssi is maintained * as an average over the last 10 frames received using a low pass filter * (all frames for now, possibly need to be more selective). Calculations * are designed such that a good compiler can optimize them. The avg * rssi state should be initialized to IEEE80211_RSSI_DUMMY_MARKER and * each sample incorporated with IEEE80211_RSSI_LPF. Use IEEE80211_RSSI_GET * to extract the current value. * * Note that we assume rssi data are in the range [-127..127] and we * discard values <-20. This is consistent with assumptions throughout * net80211 that signal strength data are in .5 dBm units relative to * the current noise floor (linear, not log). */ #define IEEE80211_RSSI_LPF_LEN 10 #define IEEE80211_RSSI_DUMMY_MARKER 127 /* NB: pow2 to optimize out * and / */ #define IEEE80211_RSSI_EP_MULTIPLIER (1<<7) #define IEEE80211_RSSI_IN(x) ((x) * IEEE80211_RSSI_EP_MULTIPLIER) #define _IEEE80211_RSSI_LPF(x, y, len) \ (((x) != IEEE80211_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y)) #define IEEE80211_RSSI_LPF(x, y) do { \ if ((y) >= -20) { \ x = _IEEE80211_RSSI_LPF((x), IEEE80211_RSSI_IN((y)), \ IEEE80211_RSSI_LPF_LEN); \ } \ } while (0) #define IEEE80211_RSSI_EP_RND(x, mul) \ ((((x) % (mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul)) #define IEEE80211_RSSI_GET(x) \ IEEE80211_RSSI_EP_RND(x, IEEE80211_RSSI_EP_MULTIPLIER) static __inline struct ieee80211_node * ieee80211_ref_node(struct ieee80211_node *ni) { ieee80211_node_incref(ni); return ni; } static __inline void ieee80211_unref_node(struct ieee80211_node **ni) { ieee80211_node_decref(*ni); *ni = NULL; /* guard against use */ } void ieee80211_node_attach(struct ieee80211com *); void ieee80211_node_lateattach(struct ieee80211com *); void ieee80211_node_detach(struct ieee80211com *); void ieee80211_node_vattach(struct ieee80211vap *); void ieee80211_node_latevattach(struct ieee80211vap *); void ieee80211_node_vdetach(struct ieee80211vap *); static __inline int ieee80211_node_is_authorized(const struct ieee80211_node *ni) { return (ni->ni_flags & IEEE80211_NODE_AUTH); } void ieee80211_node_authorize(struct ieee80211_node *); void ieee80211_node_unauthorize(struct ieee80211_node *); void ieee80211_node_setuptxparms(struct ieee80211_node *); void ieee80211_node_set_chan(struct ieee80211_node *, struct ieee80211_channel *); void ieee80211_create_ibss(struct ieee80211vap*, struct ieee80211_channel *); void ieee80211_reset_bss(struct ieee80211vap *); void ieee80211_sync_curchan(struct ieee80211com *); void ieee80211_setupcurchan(struct ieee80211com *, struct ieee80211_channel *); void ieee80211_setcurchan(struct ieee80211com *, struct ieee80211_channel *); void ieee80211_update_chw(struct ieee80211com *); int ieee80211_ibss_merge_check(struct ieee80211_node *); int ieee80211_ibss_merge(struct ieee80211_node *); struct ieee80211_scan_entry; int ieee80211_sta_join(struct ieee80211vap *, struct ieee80211_channel *, const struct ieee80211_scan_entry *); void ieee80211_sta_leave(struct ieee80211_node *); void ieee80211_node_deauth(struct ieee80211_node *, int); int ieee80211_ies_init(struct ieee80211_ies *, const uint8_t *, int); void ieee80211_ies_cleanup(struct ieee80211_ies *); void ieee80211_ies_expand(struct ieee80211_ies *); #define ieee80211_ies_setie(_ies, _ie, _off) do { \ (_ies)._ie = (_ies).data + (_off); \ } while (0) /* * Table of ieee80211_node instances. Each ieee80211com * has one that holds association stations (when operating * as an ap) or neighbors (in ibss mode). * * XXX embed this in ieee80211com instead of indirect? */ struct ieee80211_node_table { struct ieee80211com *nt_ic; /* back reference */ ieee80211_node_lock_t nt_nodelock; /* on node table */ TAILQ_HEAD(, ieee80211_node) nt_node; /* information of all nodes */ LIST_HEAD(, ieee80211_node) nt_hash[IEEE80211_NODE_HASHSIZE]; struct ieee80211_node **nt_keyixmap; /* key ix -> node map */ int nt_keyixmax; /* keyixmap size */ const char *nt_name; /* table name for debug msgs */ - ieee80211_scan_lock_t nt_scanlock; /* on nt_scangen */ - u_int nt_scangen; /* gen# for iterators */ int nt_inact_init; /* initial node inact setting */ }; struct ieee80211_node *ieee80211_alloc_node(struct ieee80211_node_table *, struct ieee80211vap *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_node *ieee80211_tmp_node(struct ieee80211vap *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_node *ieee80211_dup_bss(struct ieee80211vap *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_node *ieee80211_node_create_wds(struct ieee80211vap *, const uint8_t bssid[IEEE80211_ADDR_LEN], struct ieee80211_channel *); #ifdef IEEE80211_DEBUG_REFCNT void ieee80211_free_node_debug(struct ieee80211_node *, const char *func, int line); struct ieee80211_node *ieee80211_find_node_locked_debug( struct ieee80211_node_table *, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line); struct ieee80211_node *ieee80211_find_node_debug(struct ieee80211_node_table *, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line); struct ieee80211_node *ieee80211_find_vap_node_locked_debug( struct ieee80211_node_table *, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line); struct ieee80211_node *ieee80211_find_vap_node_debug( struct ieee80211_node_table *, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line); struct ieee80211_node * ieee80211_find_rxnode_debug(struct ieee80211com *, const struct ieee80211_frame_min *, const char *func, int line); struct ieee80211_node * ieee80211_find_rxnode_withkey_debug( struct ieee80211com *, const struct ieee80211_frame_min *, uint16_t keyix, const char *func, int line); struct ieee80211_node *ieee80211_find_txnode_debug(struct ieee80211vap *, const uint8_t *, const char *func, int line); #define ieee80211_free_node(ni) \ ieee80211_free_node_debug(ni, __func__, __LINE__) #define ieee80211_find_node_locked(nt, mac) \ ieee80211_find_node_locked_debug(nt, mac, __func__, __LINE__) #define ieee80211_find_node(nt, mac) \ ieee80211_find_node_debug(nt, mac, __func__, __LINE__) #define ieee80211_find_vap_node_locked(nt, vap, mac) \ ieee80211_find_vap_node_locked_debug(nt, vap, mac, __func__, __LINE__) #define ieee80211_find_vap_node(nt, vap, mac) \ ieee80211_find_vap_node_debug(nt, vap, mac, __func__, __LINE__) #define ieee80211_find_rxnode(ic, wh) \ ieee80211_find_rxnode_debug(ic, wh, __func__, __LINE__) #define ieee80211_find_rxnode_withkey(ic, wh, keyix) \ ieee80211_find_rxnode_withkey_debug(ic, wh, keyix, __func__, __LINE__) #define ieee80211_find_txnode(vap, mac) \ ieee80211_find_txnode_debug(vap, mac, __func__, __LINE__) #else void ieee80211_free_node(struct ieee80211_node *); struct ieee80211_node *ieee80211_find_node_locked(struct ieee80211_node_table *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_node *ieee80211_find_node(struct ieee80211_node_table *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_node *ieee80211_find_vap_node_locked( struct ieee80211_node_table *, const struct ieee80211vap *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_node *ieee80211_find_vap_node( struct ieee80211_node_table *, const struct ieee80211vap *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_node * ieee80211_find_rxnode(struct ieee80211com *, const struct ieee80211_frame_min *); struct ieee80211_node * ieee80211_find_rxnode_withkey(struct ieee80211com *, const struct ieee80211_frame_min *, uint16_t keyix); struct ieee80211_node *ieee80211_find_txnode(struct ieee80211vap *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); #endif int ieee80211_node_delucastkey(struct ieee80211_node *); void ieee80211_node_timeout(void *arg); typedef void ieee80211_iter_func(void *, struct ieee80211_node *); int ieee80211_iterate_nt(struct ieee80211_node_table *, struct ieee80211_node **, uint16_t); void ieee80211_iterate_nodes(struct ieee80211_node_table *, ieee80211_iter_func *, void *); void ieee80211_notify_erp(struct ieee80211com *); void ieee80211_dump_node(struct ieee80211_node_table *, struct ieee80211_node *); void ieee80211_dump_nodes(struct ieee80211_node_table *); struct ieee80211_node *ieee80211_fakeup_adhoc_node(struct ieee80211vap *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); struct ieee80211_scanparams; void ieee80211_init_neighbor(struct ieee80211_node *, const struct ieee80211_frame *, const struct ieee80211_scanparams *); struct ieee80211_node *ieee80211_add_neighbor(struct ieee80211vap *, const struct ieee80211_frame *, const struct ieee80211_scanparams *); void ieee80211_node_join(struct ieee80211_node *,int); void ieee80211_node_leave(struct ieee80211_node *); int8_t ieee80211_getrssi(struct ieee80211vap *); void ieee80211_getsignal(struct ieee80211vap *, int8_t *, int8_t *); #endif /* _NET80211_IEEE80211_NODE_H_ */ Index: head/sys/net80211/ieee80211_superg.c =================================================================== --- head/sys/net80211/ieee80211_superg.c (revision 302017) +++ head/sys/net80211/ieee80211_superg.c (revision 302018) @@ -1,1050 +1,1056 @@ /*- * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_wlan.h" #ifdef IEEE80211_SUPPORT_SUPERG #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * Atheros fast-frame encapsulation format. * FF max payload: * 802.2 + FFHDR + HPAD + 802.3 + 802.2 + 1500 + SPAD + 802.3 + 802.2 + 1500: * 8 + 4 + 4 + 14 + 8 + 1500 + 6 + 14 + 8 + 1500 * = 3066 */ /* fast frame header is 32-bits */ #define ATH_FF_PROTO 0x0000003f /* protocol */ #define ATH_FF_PROTO_S 0 #define ATH_FF_FTYPE 0x000000c0 /* frame type */ #define ATH_FF_FTYPE_S 6 #define ATH_FF_HLEN32 0x00000300 /* optional hdr length */ #define ATH_FF_HLEN32_S 8 #define ATH_FF_SEQNUM 0x001ffc00 /* sequence number */ #define ATH_FF_SEQNUM_S 10 #define ATH_FF_OFFSET 0xffe00000 /* offset to 2nd payload */ #define ATH_FF_OFFSET_S 21 #define ATH_FF_MAX_HDR_PAD 4 #define ATH_FF_MAX_SEP_PAD 6 #define ATH_FF_MAX_HDR 30 #define ATH_FF_PROTO_L2TUNNEL 0 /* L2 tunnel protocol */ #define ATH_FF_ETH_TYPE 0x88bd /* Ether type for encapsulated frames */ #define ATH_FF_SNAP_ORGCODE_0 0x00 #define ATH_FF_SNAP_ORGCODE_1 0x03 #define ATH_FF_SNAP_ORGCODE_2 0x7f #define ATH_FF_TXQMIN 2 /* min txq depth for staging */ #define ATH_FF_TXQMAX 50 /* maximum # of queued frames allowed */ #define ATH_FF_STAGEMAX 5 /* max waiting period for staged frame*/ #define ETHER_HEADER_COPY(dst, src) \ memcpy(dst, src, sizeof(struct ether_header)) static int ieee80211_ffppsmin = 2; /* pps threshold for ff aggregation */ SYSCTL_INT(_net_wlan, OID_AUTO, ffppsmin, CTLFLAG_RW, &ieee80211_ffppsmin, 0, "min packet rate before fast-frame staging"); static int ieee80211_ffagemax = -1; /* max time frames held on stage q */ SYSCTL_PROC(_net_wlan, OID_AUTO, ffagemax, CTLTYPE_INT | CTLFLAG_RW, &ieee80211_ffagemax, 0, ieee80211_sysctl_msecs_ticks, "I", "max hold time for fast-frame staging (ms)"); void ieee80211_superg_attach(struct ieee80211com *ic) { struct ieee80211_superg *sg; sg = (struct ieee80211_superg *) IEEE80211_MALLOC( sizeof(struct ieee80211_superg), M_80211_VAP, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); if (sg == NULL) { printf("%s: cannot allocate SuperG state block\n", __func__); return; } ic->ic_superg = sg; /* * Default to not being so aggressive for FF/AMSDU * aging, otherwise we may hold a frame around * for way too long before we expire it out. */ ieee80211_ffagemax = msecs_to_ticks(2); } void ieee80211_superg_detach(struct ieee80211com *ic) { if (ic->ic_superg != NULL) { IEEE80211_FREE(ic->ic_superg, M_80211_VAP); ic->ic_superg = NULL; } } void ieee80211_superg_vattach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; if (ic->ic_superg == NULL) /* NB: can't do fast-frames w/o state */ vap->iv_caps &= ~IEEE80211_C_FF; if (vap->iv_caps & IEEE80211_C_FF) vap->iv_flags |= IEEE80211_F_FF; /* NB: we only implement sta mode */ if (vap->iv_opmode == IEEE80211_M_STA && (vap->iv_caps & IEEE80211_C_TURBOP)) vap->iv_flags |= IEEE80211_F_TURBOP; } void ieee80211_superg_vdetach(struct ieee80211vap *vap) { } #define ATH_OUI_BYTES 0x00, 0x03, 0x7f /* * Add a WME information element to a frame. */ uint8_t * ieee80211_add_ath(uint8_t *frm, uint8_t caps, ieee80211_keyix defkeyix) { static const struct ieee80211_ath_ie info = { .ath_id = IEEE80211_ELEMID_VENDOR, .ath_len = sizeof(struct ieee80211_ath_ie) - 2, .ath_oui = { ATH_OUI_BYTES }, .ath_oui_type = ATH_OUI_TYPE, .ath_oui_subtype= ATH_OUI_SUBTYPE, .ath_version = ATH_OUI_VERSION, }; struct ieee80211_ath_ie *ath = (struct ieee80211_ath_ie *) frm; memcpy(frm, &info, sizeof(info)); ath->ath_capability = caps; if (defkeyix != IEEE80211_KEYIX_NONE) { ath->ath_defkeyix[0] = (defkeyix & 0xff); ath->ath_defkeyix[1] = ((defkeyix >> 8) & 0xff); } else { ath->ath_defkeyix[0] = 0xff; ath->ath_defkeyix[1] = 0x7f; } return frm + sizeof(info); } #undef ATH_OUI_BYTES uint8_t * ieee80211_add_athcaps(uint8_t *frm, const struct ieee80211_node *bss) { const struct ieee80211vap *vap = bss->ni_vap; return ieee80211_add_ath(frm, vap->iv_flags & IEEE80211_F_ATHEROS, ((vap->iv_flags & IEEE80211_F_WPA) == 0 && bss->ni_authmode != IEEE80211_AUTH_8021X) ? vap->iv_def_txkey : IEEE80211_KEYIX_NONE); } void ieee80211_parse_ath(struct ieee80211_node *ni, uint8_t *ie) { const struct ieee80211_ath_ie *ath = (const struct ieee80211_ath_ie *) ie; ni->ni_ath_flags = ath->ath_capability; ni->ni_ath_defkeyix = le16dec(&ath->ath_defkeyix); } int ieee80211_parse_athparams(struct ieee80211_node *ni, uint8_t *frm, const struct ieee80211_frame *wh) { struct ieee80211vap *vap = ni->ni_vap; const struct ieee80211_ath_ie *ath; u_int len = frm[1]; int capschanged; uint16_t defkeyix; if (len < sizeof(struct ieee80211_ath_ie)-2) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_SUPERG, wh, "Atheros", "too short, len %u", len); return -1; } ath = (const struct ieee80211_ath_ie *)frm; capschanged = (ni->ni_ath_flags != ath->ath_capability); defkeyix = le16dec(ath->ath_defkeyix); if (capschanged || defkeyix != ni->ni_ath_defkeyix) { ni->ni_ath_flags = ath->ath_capability; ni->ni_ath_defkeyix = defkeyix; IEEE80211_NOTE(vap, IEEE80211_MSG_SUPERG, ni, "ath ie change: new caps 0x%x defkeyix 0x%x", ni->ni_ath_flags, ni->ni_ath_defkeyix); } if (IEEE80211_ATH_CAP(vap, ni, ATHEROS_CAP_TURBO_PRIME)) { uint16_t curflags, newflags; /* * Check for turbo mode switch. Calculate flags * for the new mode and effect the switch. */ newflags = curflags = vap->iv_ic->ic_bsschan->ic_flags; /* NB: BOOST is not in ic_flags, so get it from the ie */ if (ath->ath_capability & ATHEROS_CAP_BOOST) newflags |= IEEE80211_CHAN_TURBO; else newflags &= ~IEEE80211_CHAN_TURBO; if (newflags != curflags) ieee80211_dturbo_switch(vap, newflags); } return capschanged; } /* * Decap the encapsulated frame pair and dispatch the first * for delivery. The second frame is returned for delivery * via the normal path. */ struct mbuf * ieee80211_ff_decap(struct ieee80211_node *ni, struct mbuf *m) { #define FF_LLC_SIZE (sizeof(struct ether_header) + sizeof(struct llc)) #define MS(x,f) (((x) & f) >> f##_S) struct ieee80211vap *vap = ni->ni_vap; struct llc *llc; uint32_t ath; struct mbuf *n; int framelen; /* NB: we assume caller does this check for us */ KASSERT(IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF), ("ff not negotiated")); /* * Check for fast-frame tunnel encapsulation. */ if (m->m_pkthdr.len < 3*FF_LLC_SIZE) return m; if (m->m_len < FF_LLC_SIZE && (m = m_pullup(m, FF_LLC_SIZE)) == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "fast-frame", "%s", "m_pullup(llc) failed"); vap->iv_stats.is_rx_tooshort++; return NULL; } llc = (struct llc *)(mtod(m, uint8_t *) + sizeof(struct ether_header)); if (llc->llc_snap.ether_type != htons(ATH_FF_ETH_TYPE)) return m; m_adj(m, FF_LLC_SIZE); m_copydata(m, 0, sizeof(uint32_t), (caddr_t) &ath); if (MS(ath, ATH_FF_PROTO) != ATH_FF_PROTO_L2TUNNEL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "fast-frame", "unsupport tunnel protocol, header 0x%x", ath); vap->iv_stats.is_ff_badhdr++; m_freem(m); return NULL; } /* NB: skip header and alignment padding */ m_adj(m, roundup(sizeof(uint32_t) - 2, 4) + 2); vap->iv_stats.is_ff_decap++; /* * Decap the first frame, bust it apart from the * second and deliver; then decap the second frame * and return it to the caller for normal delivery. */ m = ieee80211_decap1(m, &framelen); if (m == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "fast-frame", "%s", "first decap failed"); vap->iv_stats.is_ff_tooshort++; return NULL; } n = m_split(m, framelen, M_NOWAIT); if (n == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "fast-frame", "%s", "unable to split encapsulated frames"); vap->iv_stats.is_ff_split++; m_freem(m); /* NB: must reclaim */ return NULL; } /* XXX not right for WDS */ vap->iv_deliver_data(vap, ni, m); /* 1st of pair */ /* * Decap second frame. */ m_adj(n, roundup2(framelen, 4) - framelen); /* padding */ n = ieee80211_decap1(n, &framelen); if (n == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "fast-frame", "%s", "second decap failed"); vap->iv_stats.is_ff_tooshort++; } /* XXX verify framelen against mbuf contents */ return n; /* 2nd delivered by caller */ #undef MS #undef FF_LLC_SIZE } /* * Fast frame encapsulation. There must be two packets * chained with m_nextpkt. We do header adjustment for * each, add the tunnel encapsulation, and then concatenate * the mbuf chains to form a single frame for transmission. */ struct mbuf * ieee80211_ff_encap(struct ieee80211vap *vap, struct mbuf *m1, int hdrspace, struct ieee80211_key *key) { struct mbuf *m2; struct ether_header eh1, eh2; struct llc *llc; struct mbuf *m; int pad; m2 = m1->m_nextpkt; if (m2 == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SUPERG, "%s: only one frame\n", __func__); goto bad; } m1->m_nextpkt = NULL; /* * Adjust to include 802.11 header requirement. */ KASSERT(m1->m_len >= sizeof(eh1), ("no ethernet header!")); ETHER_HEADER_COPY(&eh1, mtod(m1, caddr_t)); m1 = ieee80211_mbuf_adjust(vap, hdrspace, key, m1); if (m1 == NULL) { printf("%s: failed initial mbuf_adjust\n", __func__); /* NB: ieee80211_mbuf_adjust handles msgs+statistics */ m_freem(m2); goto bad; } /* * Copy second frame's Ethernet header out of line * and adjust for possible padding in case there isn't room * at the end of first frame. */ KASSERT(m2->m_len >= sizeof(eh2), ("no ethernet header!")); ETHER_HEADER_COPY(&eh2, mtod(m2, caddr_t)); m2 = ieee80211_mbuf_adjust(vap, 4, NULL, m2); if (m2 == NULL) { /* NB: ieee80211_mbuf_adjust handles msgs+statistics */ printf("%s: failed second \n", __func__); goto bad; } /* * Now do tunnel encapsulation. First, each * frame gets a standard encapsulation. */ m1 = ieee80211_ff_encap1(vap, m1, &eh1); if (m1 == NULL) goto bad; m2 = ieee80211_ff_encap1(vap, m2, &eh2); if (m2 == NULL) goto bad; /* * Pad leading frame to a 4-byte boundary. If there * is space at the end of the first frame, put it * there; otherwise prepend to the front of the second * frame. We know doing the second will always work * because we reserve space above. We prefer appending * as this typically has better DMA alignment properties. */ for (m = m1; m->m_next != NULL; m = m->m_next) ; pad = roundup2(m1->m_pkthdr.len, 4) - m1->m_pkthdr.len; if (pad) { if (M_TRAILINGSPACE(m) < pad) { /* prepend to second */ m2->m_data -= pad; m2->m_len += pad; m2->m_pkthdr.len += pad; } else { /* append to first */ m->m_len += pad; m1->m_pkthdr.len += pad; } } /* * A-MSDU's are just appended; the "I'm A-MSDU!" bit is in the * QoS header. * * XXX optimize by prepending together */ m->m_next = m2; /* NB: last mbuf from above */ m1->m_pkthdr.len += m2->m_pkthdr.len; M_PREPEND(m1, sizeof(uint32_t)+2, M_NOWAIT); if (m1 == NULL) { /* XXX cannot happen */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_SUPERG, "%s: no space for tunnel header\n", __func__); vap->iv_stats.is_tx_nobuf++; return NULL; } memset(mtod(m1, void *), 0, sizeof(uint32_t)+2); M_PREPEND(m1, sizeof(struct llc), M_NOWAIT); if (m1 == NULL) { /* XXX cannot happen */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_SUPERG, "%s: no space for llc header\n", __func__); vap->iv_stats.is_tx_nobuf++; return NULL; } llc = mtod(m1, struct llc *); llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP; llc->llc_control = LLC_UI; llc->llc_snap.org_code[0] = ATH_FF_SNAP_ORGCODE_0; llc->llc_snap.org_code[1] = ATH_FF_SNAP_ORGCODE_1; llc->llc_snap.org_code[2] = ATH_FF_SNAP_ORGCODE_2; llc->llc_snap.ether_type = htons(ATH_FF_ETH_TYPE); vap->iv_stats.is_ff_encap++; return m1; bad: vap->iv_stats.is_ff_encapfail++; if (m1 != NULL) m_freem(m1); if (m2 != NULL) m_freem(m2); return NULL; } /* * A-MSDU encapsulation. * * This assumes just two frames for now, since we're borrowing the * same queuing code and infrastructure as fast-frames. * * There must be two packets chained with m_nextpkt. * We do header adjustment for each, and then concatenate the mbuf chains * to form a single frame for transmission. */ struct mbuf * ieee80211_amsdu_encap(struct ieee80211vap *vap, struct mbuf *m1, int hdrspace, struct ieee80211_key *key) { struct mbuf *m2; struct ether_header eh1, eh2; struct mbuf *m; int pad; m2 = m1->m_nextpkt; if (m2 == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SUPERG, "%s: only one frame\n", __func__); goto bad; } m1->m_nextpkt = NULL; /* * Include A-MSDU header in adjusting header layout. */ KASSERT(m1->m_len >= sizeof(eh1), ("no ethernet header!")); ETHER_HEADER_COPY(&eh1, mtod(m1, caddr_t)); m1 = ieee80211_mbuf_adjust(vap, hdrspace + sizeof(struct llc) + sizeof(uint32_t) + sizeof(struct ether_header), key, m1); if (m1 == NULL) { /* NB: ieee80211_mbuf_adjust handles msgs+statistics */ m_freem(m2); goto bad; } /* * Copy second frame's Ethernet header out of line * and adjust for encapsulation headers. Note that * we make room for padding in case there isn't room * at the end of first frame. */ KASSERT(m2->m_len >= sizeof(eh2), ("no ethernet header!")); ETHER_HEADER_COPY(&eh2, mtod(m2, caddr_t)); m2 = ieee80211_mbuf_adjust(vap, 4, NULL, m2); if (m2 == NULL) { /* NB: ieee80211_mbuf_adjust handles msgs+statistics */ goto bad; } /* * Now do tunnel encapsulation. First, each * frame gets a standard encapsulation. */ m1 = ieee80211_ff_encap1(vap, m1, &eh1); if (m1 == NULL) goto bad; m2 = ieee80211_ff_encap1(vap, m2, &eh2); if (m2 == NULL) goto bad; /* * Pad leading frame to a 4-byte boundary. If there * is space at the end of the first frame, put it * there; otherwise prepend to the front of the second * frame. We know doing the second will always work * because we reserve space above. We prefer appending * as this typically has better DMA alignment properties. */ for (m = m1; m->m_next != NULL; m = m->m_next) ; pad = roundup2(m1->m_pkthdr.len, 4) - m1->m_pkthdr.len; if (pad) { if (M_TRAILINGSPACE(m) < pad) { /* prepend to second */ m2->m_data -= pad; m2->m_len += pad; m2->m_pkthdr.len += pad; } else { /* append to first */ m->m_len += pad; m1->m_pkthdr.len += pad; } } /* * Now, stick 'em together. */ m->m_next = m2; /* NB: last mbuf from above */ m1->m_pkthdr.len += m2->m_pkthdr.len; vap->iv_stats.is_amsdu_encap++; return m1; bad: vap->iv_stats.is_amsdu_encapfail++; if (m1 != NULL) m_freem(m1); if (m2 != NULL) m_freem(m2); return NULL; } static void ff_transmit(struct ieee80211_node *ni, struct mbuf *m) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; int error; IEEE80211_TX_LOCK_ASSERT(vap->iv_ic); /* encap and xmit */ m = ieee80211_encap(vap, ni, m); if (m != NULL) { struct ifnet *ifp = vap->iv_ifp; error = ieee80211_parent_xmitpkt(ic, m); if (!error) if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); } else ieee80211_free_node(ni); } /* * Flush frames to device; note we re-use the linked list * the frames were stored on and use the sentinel (unchanged) * which may be non-NULL. */ static void ff_flush(struct mbuf *head, struct mbuf *last) { struct mbuf *m, *next; struct ieee80211_node *ni; struct ieee80211vap *vap; for (m = head; m != last; m = next) { next = m->m_nextpkt; m->m_nextpkt = NULL; ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; vap = ni->ni_vap; IEEE80211_NOTE(vap, IEEE80211_MSG_SUPERG, ni, "%s: flush frame, age %u", __func__, M_AGE_GET(m)); vap->iv_stats.is_ff_flush++; ff_transmit(ni, m); } } /* * Age frames on the staging queue. * * This is called without the comlock held, but it does all its work * behind the comlock. Because of this, it's possible that the * staging queue will be serviced between the function which called * it and now; thus simply checking that the queue has work in it * may fail. * * See PR kern/174283 for more details. */ void ieee80211_ff_age(struct ieee80211com *ic, struct ieee80211_stageq *sq, int quanta) { struct mbuf *m, *head; struct ieee80211_node *ni; #if 0 KASSERT(sq->head != NULL, ("stageq empty")); #endif IEEE80211_LOCK(ic); head = sq->head; while ((m = sq->head) != NULL && M_AGE_GET(m) < quanta) { int tid = WME_AC_TO_TID(M_WME_GETAC(m)); /* clear staging ref to frame */ ni = (struct ieee80211_node *) m->m_pkthdr.rcvif; KASSERT(ni->ni_tx_superg[tid] == m, ("staging queue empty")); ni->ni_tx_superg[tid] = NULL; sq->head = m->m_nextpkt; sq->depth--; } if (m == NULL) sq->tail = NULL; else M_AGE_SUB(m, quanta); IEEE80211_UNLOCK(ic); IEEE80211_TX_LOCK(ic); ff_flush(head, m); IEEE80211_TX_UNLOCK(ic); } static void stageq_add(struct ieee80211com *ic, struct ieee80211_stageq *sq, struct mbuf *m) { int age = ieee80211_ffagemax; IEEE80211_LOCK_ASSERT(ic); if (sq->tail != NULL) { sq->tail->m_nextpkt = m; age -= M_AGE_GET(sq->head); } else sq->head = m; KASSERT(age >= 0, ("age %d", age)); M_AGE_SET(m, age); m->m_nextpkt = NULL; sq->tail = m; sq->depth++; } static void stageq_remove(struct ieee80211com *ic, struct ieee80211_stageq *sq, struct mbuf *mstaged) { struct mbuf *m, *mprev; IEEE80211_LOCK_ASSERT(ic); mprev = NULL; for (m = sq->head; m != NULL; m = m->m_nextpkt) { if (m == mstaged) { if (mprev == NULL) sq->head = m->m_nextpkt; else mprev->m_nextpkt = m->m_nextpkt; if (sq->tail == m) sq->tail = mprev; sq->depth--; return; } mprev = m; } printf("%s: packet not found\n", __func__); } static uint32_t ff_approx_txtime(struct ieee80211_node *ni, const struct mbuf *m1, const struct mbuf *m2) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; uint32_t framelen; uint32_t frame_time; /* * Approximate the frame length to be transmitted. A swag to add * the following maximal values to the skb payload: * - 32: 802.11 encap + CRC * - 24: encryption overhead (if wep bit) * - 4 + 6: fast-frame header and padding * - 16: 2 LLC FF tunnel headers * - 14: 1 802.3 FF tunnel header (mbuf already accounts for 2nd) */ framelen = m1->m_pkthdr.len + 32 + ATH_FF_MAX_HDR_PAD + ATH_FF_MAX_SEP_PAD + ATH_FF_MAX_HDR; if (vap->iv_flags & IEEE80211_F_PRIVACY) framelen += 24; if (m2 != NULL) framelen += m2->m_pkthdr.len; /* * For now, we assume non-shortgi, 20MHz, just because I want to * at least test 802.11n. */ if (ni->ni_txrate & IEEE80211_RATE_MCS) frame_time = ieee80211_compute_duration_ht(framelen, ni->ni_txrate, IEEE80211_HT_RC_2_STREAMS(ni->ni_txrate), 0, /* isht40 */ 0); /* isshortgi */ else frame_time = ieee80211_compute_duration(ic->ic_rt, framelen, ni->ni_txrate, 0); return (frame_time); } /* * Check if the supplied frame can be partnered with an existing * or pending frame. Return a reference to any frame that should be * sent on return; otherwise return NULL. */ struct mbuf * ieee80211_ff_check(struct ieee80211_node *ni, struct mbuf *m) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_superg *sg = ic->ic_superg; const int pri = M_WME_GETAC(m); struct ieee80211_stageq *sq; struct ieee80211_tx_ampdu *tap; struct mbuf *mstaged; uint32_t txtime, limit; IEEE80211_TX_UNLOCK_ASSERT(ic); /* * Check if the supplied frame can be aggregated. * * NB: we allow EAPOL frames to be aggregated with other ucast traffic. * Do 802.1x EAPOL frames proceed in the clear? Then they couldn't * be aggregated with other types of frames when encryption is on? */ IEEE80211_LOCK(ic); tap = &ni->ni_tx_ampdu[WME_AC_TO_TID(pri)]; mstaged = ni->ni_tx_superg[WME_AC_TO_TID(pri)]; /* XXX NOTE: reusing packet counter state from A-MPDU */ /* * XXX NOTE: this means we're double-counting; it should just * be done in ieee80211_output.c once for both superg and A-MPDU. */ ieee80211_txampdu_count_packet(tap); /* * When not in station mode never aggregate a multicast * frame; this insures, for example, that a combined frame * does not require multiple encryption keys. */ if (vap->iv_opmode != IEEE80211_M_STA && ETHER_IS_MULTICAST(mtod(m, struct ether_header *)->ether_dhost)) { /* XXX flush staged frame? */ IEEE80211_UNLOCK(ic); return m; } /* * If there is no frame to combine with and the pps is * too low; then do not attempt to aggregate this frame. */ if (mstaged == NULL && ieee80211_txampdu_getpps(tap) < ieee80211_ffppsmin) { IEEE80211_UNLOCK(ic); return m; } sq = &sg->ff_stageq[pri]; /* * Check the txop limit to insure the aggregate fits. */ limit = IEEE80211_TXOP_TO_US( ic->ic_wme.wme_chanParams.cap_wmeParams[pri].wmep_txopLimit); if (limit != 0 && (txtime = ff_approx_txtime(ni, m, mstaged)) > limit) { /* * Aggregate too long, return to the caller for direct * transmission. In addition, flush any pending frame * before sending this one. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_SUPERG, "%s: txtime %u exceeds txop limit %u\n", __func__, txtime, limit); ni->ni_tx_superg[WME_AC_TO_TID(pri)] = NULL; if (mstaged != NULL) stageq_remove(ic, sq, mstaged); IEEE80211_UNLOCK(ic); if (mstaged != NULL) { IEEE80211_TX_LOCK(ic); IEEE80211_NOTE(vap, IEEE80211_MSG_SUPERG, ni, "%s: flush staged frame", __func__); /* encap and xmit */ ff_transmit(ni, mstaged); IEEE80211_TX_UNLOCK(ic); } return m; /* NB: original frame */ } /* * An aggregation candidate. If there's a frame to partner * with then combine and return for processing. Otherwise * save this frame and wait for a partner to show up (or * the frame to be flushed). Note that staged frames also * hold their node reference. */ if (mstaged != NULL) { ni->ni_tx_superg[WME_AC_TO_TID(pri)] = NULL; stageq_remove(ic, sq, mstaged); IEEE80211_UNLOCK(ic); IEEE80211_NOTE(vap, IEEE80211_MSG_SUPERG, ni, "%s: aggregate fast-frame", __func__); /* * Release the node reference; we only need * the one already in mstaged. */ KASSERT(mstaged->m_pkthdr.rcvif == (void *)ni, ("rcvif %p ni %p", mstaged->m_pkthdr.rcvif, ni)); ieee80211_free_node(ni); m->m_nextpkt = NULL; mstaged->m_nextpkt = m; mstaged->m_flags |= M_FF; /* NB: mark for encap work */ } else { KASSERT(ni->ni_tx_superg[WME_AC_TO_TID(pri)]== NULL, ("ni_tx_superg[]: %p", ni->ni_tx_superg[WME_AC_TO_TID(pri)])); ni->ni_tx_superg[WME_AC_TO_TID(pri)] = m; stageq_add(ic, sq, m); IEEE80211_UNLOCK(ic); IEEE80211_NOTE(vap, IEEE80211_MSG_SUPERG, ni, "%s: stage frame, %u queued", __func__, sq->depth); /* NB: mstaged is NULL */ } return mstaged; } struct mbuf * ieee80211_amsdu_check(struct ieee80211_node *ni, struct mbuf *m) { /* * XXX TODO: actually enforce the node support * and HTCAP requirements for the maximum A-MSDU * size. */ /* First: software A-MSDU transmit? */ if (! ieee80211_amsdu_tx_ok(ni)) return (m); /* Next - EAPOL? Nope, don't aggregate; we don't QoS encap them */ if (m->m_flags & (M_EAPOL | M_MCAST | M_BCAST)) return (m); /* Next - needs to be a data frame, non-broadcast, etc */ if (ETHER_IS_MULTICAST(mtod(m, struct ether_header *)->ether_dhost)) return (m); return (ieee80211_ff_check(ni, m)); } void ieee80211_ff_node_init(struct ieee80211_node *ni) { /* * Clean FF state on re-associate. This handles the case * where a station leaves w/o notifying us and then returns * before node is reaped for inactivity. */ ieee80211_ff_node_cleanup(ni); } +/* + * Note: this comlock acquisition LORs with the node lock: + * + * 1: sta_join1 -> NODE_LOCK -> node_free -> node_cleanup -> ff_node_cleanup -> COM_LOCK + * 2: TBD + */ void ieee80211_ff_node_cleanup(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211_superg *sg = ic->ic_superg; struct mbuf *m, *next_m, *head; int tid; IEEE80211_LOCK(ic); head = NULL; for (tid = 0; tid < WME_NUM_TID; tid++) { int ac = TID_TO_WME_AC(tid); /* * XXX Initialise the packet counter. * * This may be double-work for 11n stations; * but without it we never setup things. */ ieee80211_txampdu_init_pps(&ni->ni_tx_ampdu[tid]); m = ni->ni_tx_superg[tid]; if (m != NULL) { ni->ni_tx_superg[tid] = NULL; stageq_remove(ic, &sg->ff_stageq[ac], m); m->m_nextpkt = head; head = m; } } IEEE80211_UNLOCK(ic); /* * Free mbufs, taking care to not dereference the mbuf after * we free it (hence grabbing m_nextpkt before we free it.) */ m = head; while (m != NULL) { next_m = m->m_nextpkt; m_freem(m); ieee80211_free_node(ni); m = next_m; } } /* * Switch between turbo and non-turbo operating modes. * Use the specified channel flags to locate the new * channel, update 802.11 state, and then call back into * the driver to effect the change. */ void ieee80211_dturbo_switch(struct ieee80211vap *vap, int newflags) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_channel *chan; chan = ieee80211_find_channel(ic, ic->ic_bsschan->ic_freq, newflags); if (chan == NULL) { /* XXX should not happen */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_SUPERG, "%s: no channel with freq %u flags 0x%x\n", __func__, ic->ic_bsschan->ic_freq, newflags); return; } IEEE80211_DPRINTF(vap, IEEE80211_MSG_SUPERG, "%s: %s -> %s (freq %u flags 0x%x)\n", __func__, ieee80211_phymode_name[ieee80211_chan2mode(ic->ic_bsschan)], ieee80211_phymode_name[ieee80211_chan2mode(chan)], chan->ic_freq, chan->ic_flags); ic->ic_bsschan = chan; ic->ic_prevchan = ic->ic_curchan; ic->ic_curchan = chan; ic->ic_rt = ieee80211_get_ratetable(chan); ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); /* NB: do not need to reset ERP state 'cuz we're in sta mode */ } /* * Return the current ``state'' of an Atheros capbility. * If associated in station mode report the negotiated * setting. Otherwise report the current setting. */ static int getathcap(struct ieee80211vap *vap, int cap) { if (vap->iv_opmode == IEEE80211_M_STA && vap->iv_state == IEEE80211_S_RUN) return IEEE80211_ATH_CAP(vap, vap->iv_bss, cap) != 0; else return (vap->iv_flags & cap) != 0; } static int superg_ioctl_get80211(struct ieee80211vap *vap, struct ieee80211req *ireq) { switch (ireq->i_type) { case IEEE80211_IOC_FF: ireq->i_val = getathcap(vap, IEEE80211_F_FF); break; case IEEE80211_IOC_TURBOP: ireq->i_val = getathcap(vap, IEEE80211_F_TURBOP); break; default: return ENOSYS; } return 0; } IEEE80211_IOCTL_GET(superg, superg_ioctl_get80211); static int superg_ioctl_set80211(struct ieee80211vap *vap, struct ieee80211req *ireq) { switch (ireq->i_type) { case IEEE80211_IOC_FF: if (ireq->i_val) { if ((vap->iv_caps & IEEE80211_C_FF) == 0) return EOPNOTSUPP; vap->iv_flags |= IEEE80211_F_FF; } else vap->iv_flags &= ~IEEE80211_F_FF; return ENETRESET; case IEEE80211_IOC_TURBOP: if (ireq->i_val) { if ((vap->iv_caps & IEEE80211_C_TURBOP) == 0) return EOPNOTSUPP; vap->iv_flags |= IEEE80211_F_TURBOP; } else vap->iv_flags &= ~IEEE80211_F_TURBOP; return ENETRESET; default: return ENOSYS; } } IEEE80211_IOCTL_SET(superg, superg_ioctl_set80211); #endif /* IEEE80211_SUPPORT_SUPERG */