Index: head/sys/conf/kern.opts.mk =================================================================== --- head/sys/conf/kern.opts.mk (revision 301813) +++ head/sys/conf/kern.opts.mk (revision 301814) @@ -1,160 +1,161 @@ # $FreeBSD$ # Options set in the build system that affect the kernel somehow. # # Define MK_* variables (which are either "yes" or "no") for users # to set via WITH_*/WITHOUT_* in /etc/src.conf and override in the # make(1) environment. # These should be tested with `== "no"' or `!= "no"' in makefiles. # The NO_* variables should only be set by makefiles for variables # that haven't been converted over. # # Note: bsd.own.mk must be included before the rest of kern.opts.mk to make # building on 10.x and earlier work. This should be removed when that's no # longer supported since it confounds the defaults (since it uses the host's # notion of defaults rather than what's default in current when building # within sys/modules). .include # These options are used by the kernel build process (kern.mk and kmod.mk) # They have to be listed here so we can build modules outside of the # src tree. __DEFAULT_YES_OPTIONS = \ AUTOFS \ BHYVE \ BLUETOOTH \ CCD \ CDDL \ CRYPT \ CUSE \ FORMAT_EXTENSIONS \ INET \ INET6 \ IPFILTER \ ISCSI \ KERNEL_SYMBOLS \ NETGRAPH \ PF \ SOURCELESS_HOST \ SOURCELESS_UCODE \ USB_GADGET_EXAMPLES \ ZFS __DEFAULT_NO_OPTIONS = \ EISA \ + EXTRA_TCP_STACKS \ NAND \ OFED # Some options are totally broken on some architectures. We disable # them. If you need to enable them on an experimental basis, you # must change this code. # Note: These only apply to the list of modules we build by default # and sometimes what is in the opt_*.h files by default. # Kernel config files are unaffected, though some targets can be # affected by KERNEL_SYMBOLS, FORMAT_EXTENSIONS, CTF and SSP. # Things that don't work based on the CPU .if ${MACHINE_CPUARCH} == "arm" . if ${MACHINE_ARCH:Marmv6*} == "" BROKEN_OPTIONS+= CDDL ZFS . endif .endif .if ${MACHINE_CPUARCH} == "mips" BROKEN_OPTIONS+= CDDL ZFS .endif .if ${MACHINE_CPUARCH} == "powerpc" && ${MACHINE_ARCH} == "powerpc" BROKEN_OPTIONS+= ZFS .endif # Things that don't work because the kernel doesn't have the support # for them. .if ${MACHINE} != "i386" BROKEN_OPTIONS+= EISA .endif .if ${MACHINE} != "i386" && ${MACHINE} != "amd64" BROKEN_OPTIONS+= OFED .endif # expanded inline from bsd.mkopt.mk to avoid share/mk dependency # Those that default to yes .for var in ${__DEFAULT_YES_OPTIONS} .if !defined(MK_${var}) .if defined(WITHOUT_${var}) # WITHOUT always wins MK_${var}:= no .else MK_${var}:= yes .endif .else .if ${MK_${var}} != "yes" && ${MK_${var}} != "no" .error "Illegal value for MK_${var}: ${MK_${var}}" .endif .endif # !defined(MK_${var}) .endfor .undef __DEFAULT_YES_OPTIONS # Those that default to no .for var in ${__DEFAULT_NO_OPTIONS} .if !defined(MK_${var}) .if defined(WITH_${var}) && !defined(WITHOUT_${var}) # WITHOUT always wins MK_${var}:= yes .else MK_${var}:= no .endif .else .if ${MK_${var}} != "yes" && ${MK_${var}} != "no" .error "Illegal value for MK_${var}: ${MK_${var}}" .endif .endif # !defined(MK_${var}) .endfor .undef __DEFAULT_NO_OPTIONS # # MK_* options which are always no, usually because they are # unsupported/badly broken on this architecture. # .for var in ${BROKEN_OPTIONS} MK_${var}:= no .endfor .undef BROKEN_OPTIONS #end of bsd.mkopt.mk expanded inline. # # MK_*_SUPPORT options which default to "yes" unless their corresponding # MK_* variable is set to "no". # .for var in \ INET \ INET6 .if defined(WITHOUT_${var}_SUPPORT) || ${MK_${var}} == "no" MK_${var}_SUPPORT:= no .else .if defined(KERNBUILDDIR) # See if there's an opt_foo.h .if !defined(OPT_${var}) OPT_${var}!= cat ${KERNBUILDDIR}/opt_${var:tl}.h; echo .export OPT_${var} .endif .if ${OPT_${var}} == "" # nothing -> no MK_${var}_SUPPORT:= no .else MK_${var}_SUPPORT:= yes .endif .else # otherwise, yes MK_${var}_SUPPORT:= yes .endif .endif .endfor # Some modules only compile successfully if option FDT is set, due to #ifdef FDT # wrapped around declarations. Module makefiles can optionally compile such # things using .if !empty(OPT_FDT) .if !defined(OPT_FDT) && defined(KERNBUILDDIR) OPT_FDT!= sed -n '/FDT/p' ${KERNBUILDDIR}/opt_platform.h .export OPT_FDT .endif Index: head/sys/conf/kern.post.mk =================================================================== --- head/sys/conf/kern.post.mk (revision 301813) +++ head/sys/conf/kern.post.mk (revision 301814) @@ -1,390 +1,394 @@ # $FreeBSD$ # Part of a unified Makefile for building kernels. This part includes all # the definitions that need to be after all the % directives except %RULES # and ones that act like they are part of %RULES. # # Most make variables should not be defined in this file. Instead, they # should be defined in the kern.pre.mk so that port makefiles can # override or augment them. # In case the config had a makeoptions DESTDIR... .if defined(DESTDIR) MKMODULESENV+= DESTDIR="${DESTDIR}" .endif SYSDIR?= ${S:C;^[^/];${.CURDIR}/&;:tA} MKMODULESENV+= KERNBUILDDIR="${.CURDIR}" SYSDIR="${SYSDIR}" .if defined(CONF_CFLAGS) MKMODULESENV+= CONF_CFLAGS="${CONF_CFLAGS}" .endif .if defined(WITH_CTF) MKMODULESENV+= WITH_CTF="${WITH_CTF}" .endif +.if defined(WITH_EXTRA_TCP_STACKS) +MKMODULESENV+= WITH_EXTRA_TCP_STACKS="${WITH_EXTRA_TCP_STACKS}" +.endif + # Allow overriding the kernel debug directory, so kernel and user debug may be # installed in different directories. Setting it to "" restores the historical # behavior of installing debug files in the kernel directory. KERN_DEBUGDIR?= ${DEBUGDIR} .MAIN: all .for target in all clean cleandepend cleandir clobber depend install \ obj reinstall tags ${target}: kernel-${target} .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists($S/modules) ${target}: modules-${target} modules-${target}: cd $S/modules; ${MKMODULESENV} ${MAKE} \ ${target:S/^reinstall$/install/:S/^clobber$/cleandir/} .endif .endfor # Handle ports (as defined by the user) that build kernel modules .if !defined(NO_MODULES) && defined(PORTS_MODULES) # # The ports tree needs some environment variables defined to match the new kernel # # Ports search for some dependencies in PATH, so add the location of the installed files LOCALBASE?= /usr/local # SRC_BASE is how the ports tree refers to the location of the base source files .if !defined(SRC_BASE) SRC_BASE= ${SYSDIR:H:tA} .endif # OSVERSION is used by some ports to determine build options .if !defined(OSRELDATE) # Definition copied from src/Makefile.inc1 OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \ ${MAKEOBJDIRPREFIX}${SRC_BASE}/include/osreldate.h .endif # Keep the related ports builds in the obj directory so that they are only rebuilt once per kernel build WRKDIRPREFIX?= ${MAKEOBJDIRPREFIX}${SRC_BASE}/sys/${KERNCONF} PORTSMODULESENV=\ PATH=${PATH}:${LOCALBASE}/bin:${LOCALBASE}/sbin \ SRC_BASE=${SRC_BASE} \ OSVERSION=${OSRELDATE} \ WRKDIRPREFIX=${WRKDIRPREFIX} # The WRKDIR needs to be cleaned before building, and trying to change the target # with a :C pattern below results in install -> instclean all: .for __i in ${PORTS_MODULES} @${ECHO} "===> Ports module ${__i} (all)" cd $${PORTSDIR:-/usr/ports}/${__i}; ${PORTSMODULESENV} ${MAKE} -B clean all .endfor .for __target in install reinstall clean ${__target}: ports-${__target} ports-${__target}: .for __i in ${PORTS_MODULES} @${ECHO} "===> Ports module ${__i} (${__target})" cd $${PORTSDIR:-/usr/ports}/${__i}; ${PORTSMODULESENV} ${MAKE} -B ${__target:C/install/deinstall reinstall/:C/reinstall/deinstall reinstall/} .endfor .endfor .endif .ORDER: kernel-install modules-install beforebuild: .PHONY kernel-all: beforebuild .WAIT ${KERNEL_KO} ${KERNEL_EXTRA} kernel-cleandir: kernel-clean kernel-cleandepend kernel-clobber: find . -maxdepth 1 ! -type d ! -name version -delete kernel-obj: .if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists($S/modules) modules: modules-all .if !defined(NO_MODULES_OBJ) modules-all modules-depend: modules-obj .endif .endif .if !defined(DEBUG) FULLKERNEL= ${KERNEL_KO} .else FULLKERNEL= ${KERNEL_KO}.full ${KERNEL_KO}: ${FULLKERNEL} ${KERNEL_KO}.debug ${OBJCOPY} --strip-debug --add-gnu-debuglink=${KERNEL_KO}.debug \ ${FULLKERNEL} ${.TARGET} ${KERNEL_KO}.debug: ${FULLKERNEL} ${OBJCOPY} --only-keep-debug ${FULLKERNEL} ${.TARGET} install.debug reinstall.debug: gdbinit cd ${.CURDIR}; ${MAKE} ${.TARGET:R} # Install gdbinit files for kernel debugging. gdbinit: grep -v '# XXX' ${S}/../tools/debugscripts/dot.gdbinit | \ sed "s:MODPATH:${.OBJDIR}/modules:" > .gdbinit cp ${S}/../tools/debugscripts/gdbinit.kernel ${.CURDIR} .if exists(${S}/../tools/debugscripts/gdbinit.${MACHINE_CPUARCH}) cp ${S}/../tools/debugscripts/gdbinit.${MACHINE_CPUARCH} \ ${.CURDIR}/gdbinit.machine .endif .endif ${FULLKERNEL}: ${SYSTEM_DEP} vers.o @rm -f ${.TARGET} @echo linking ${.TARGET} ${SYSTEM_LD} .if !empty(MD_ROOT_SIZE_CONFIGURED) && defined(MFS_IMAGE) @sh ${S}/tools/embed_mfs.sh ${.TARGET} ${MFS_IMAGE} .endif .if ${MK_CTF} != "no" @echo ${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ... @${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ${SYSTEM_OBJS} vers.o .endif .if !defined(DEBUG) ${OBJCOPY} --strip-debug ${.TARGET} .endif ${SYSTEM_LD_TAIL} OBJS_DEPEND_GUESS+= assym.s vnode_if.h ${BEFORE_DEPEND:M*.h} \ ${MFILES:T:S/.m$/.h/} LNFILES= ${CFILES:T:S/.c$/.ln/} .for mfile in ${MFILES} # XXX the low quality .m.o rules gnerated by config are normally used # instead of the .m.c rules here. ${mfile:T:S/.m$/.c/}: ${mfile} ${AWK} -f $S/tools/makeobjops.awk ${mfile} -c ${mfile:T:S/.m$/.h/}: ${mfile} ${AWK} -f $S/tools/makeobjops.awk ${mfile} -h .endfor kernel-clean: rm -f *.o *.so *.So *.ko *.s eddep errs \ ${FULLKERNEL} ${KERNEL_KO} ${KERNEL_KO}.debug \ linterrs tags vers.c \ vnode_if.c vnode_if.h vnode_if_newproto.h vnode_if_typedef.h \ ${MFILES:T:S/.m$/.c/} ${MFILES:T:S/.m$/.h/} \ ${CLEAN} lint: ${LNFILES} ${LINT} ${LINTKERNFLAGS} ${CFLAGS:M-[DILU]*} ${.ALLSRC} 2>&1 | \ tee -a linterrs # This is a hack. BFD "optimizes" away dynamic mode if there are no # dynamic references. We could probably do a '-Bforcedynamic' mode like # in the a.out ld. For now, this works. HACK_EXTRA_FLAGS?= -shared hack.So: Makefile :> hack.c ${CC} ${HACK_EXTRA_FLAGS} -nostdlib hack.c -o hack.So rm -f hack.c assym.s: $S/kern/genassym.sh genassym.o NM='${NM}' NMFLAGS='${NMFLAGS}' sh $S/kern/genassym.sh genassym.o > ${.TARGET} genassym.o: $S/$M/$M/genassym.c ${CC} -c ${CFLAGS:N-fno-common} $S/$M/$M/genassym.c ${SYSTEM_OBJS} genassym.o vers.o: opt_global.h # Skip reading .depend when not needed to speed up tree-walks # and simple lookups. .if !empty(.MAKEFLAGS:M-V${_V_READ_DEPEND}) || make(obj) || make(clean*) || \ make(install*) || make(kernel-obj) || make(kernel-clean*) || \ make(kernel-install*) _SKIP_READ_DEPEND= 1 .MAKE.DEPENDFILE= /dev/null .endif kernel-depend: .depend SRCS= assym.s vnode_if.h ${BEFORE_DEPEND} ${CFILES} \ ${SYSTEM_CFILES} ${GEN_CFILES} ${SFILES} \ ${MFILES:T:S/.m$/.h/} DEPENDFILES= .depend .depend.* # Skip generating or including .depend.* files if in meta+filemon mode since # it will track dependencies itself. OBJS_DEPEND_GUESS is still used though. .if !empty(.MAKE.MODE:Unormal:Mmeta) && empty(.MAKE.MODE:Unormal:Mnofilemon) _meta_filemon= 1 .endif DEPENDOBJS+= ${SYSTEM_OBJS} genassym.o DEPENDFILES_OBJS= ${DEPENDOBJS:O:u:C/^/.depend./} .if ${MAKE_VERSION} < 20160220 DEPEND_MP?= -MP .endif DEPEND_CFLAGS+= -MD ${DEPEND_MP} -MF.depend.${.TARGET} DEPEND_CFLAGS+= -MT${.TARGET} .if !defined(_meta_filemon) .if defined(.PARSEDIR) # Only add in DEPEND_CFLAGS for CFLAGS on files we expect from DEPENDOBJS # as those are the only ones we will include. DEPEND_CFLAGS_CONDITION= "${DEPENDOBJS:M${.TARGET}}" != "" CFLAGS+= ${${DEPEND_CFLAGS_CONDITION}:?${DEPEND_CFLAGS}:} .else CFLAGS+= ${DEPEND_CFLAGS} .endif .if !defined(_SKIP_READ_DEPEND) .for __depend_obj in ${DEPENDFILES_OBJS} .if ${MAKE_VERSION} < 20160220 .sinclude "${.OBJDIR}/${__depend_obj}" .else .dinclude "${.OBJDIR}/${__depend_obj}" .endif .endfor .endif # !defined(_SKIP_READ_DEPEND) .endif # !defined(_meta_filemon) # Always run 'make depend' to generate dependencies early and to avoid the # need for manually running it. For the kernel this is mostly a NOP since # all dependencies are correctly added or accounted for. This is mostly to # ensure downstream uses of kernel-depend are handled. beforebuild: kernel-depend # Guess some dependencies for when no ${DEPENDFILE}.OBJ is generated yet. # For meta+filemon the .meta file is checked for since it is the dependency # file used. .for __obj in ${DEPENDOBJS:O:u} .if (defined(_meta_filemon) && !exists(${.OBJDIR}/${__obj}.meta)) || \ (!defined(_meta_filemon) && !exists(${.OBJDIR}/.depend.${__obj})) .if ${SYSTEM_OBJS:M${__obj}} ${__obj}: ${OBJS_DEPEND_GUESS} .endif ${__obj}: ${OBJS_DEPEND_GUESS.${__obj}} .elif defined(_meta_filemon) # For meta mode we still need to know which file to depend on to avoid # ambiguous suffix transformation rules from .PATH. Meta mode does not # use .depend files. We really only need source files, not headers. .if ${SYSTEM_OBJS:M${__obj}} ${__obj}: ${OBJS_DEPEND_GUESS:N*.h} .endif ${__obj}: ${OBJS_DEPEND_GUESS.${__obj}:N*.h} .endif .endfor .NOPATH: .depend ${DEPENDFILES_OBJS} .depend: .PRECIOUS ${SRCS} _ILINKS= machine .if ${MACHINE} != ${MACHINE_CPUARCH} && ${MACHINE} != "arm64" _ILINKS+= ${MACHINE_CPUARCH} .endif .if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64" _ILINKS+= x86 .endif # Ensure that the link exists without depending on it when it exists. .for _link in ${_ILINKS} .if !exists(${.OBJDIR}/${_link}) ${SRCS} ${CLEAN:M*.o}: ${_link} .endif .endfor ${_ILINKS}: @case ${.TARGET} in \ machine) \ path=${S}/${MACHINE}/include ;; \ *) \ path=${S}/${.TARGET}/include ;; \ esac ; \ ${ECHO} ${.TARGET} "->" $$path ; \ ln -fhs $$path ${.TARGET} # .depend needs include links so we remove them only together. kernel-cleandepend: .PHONY rm -f ${DEPENDFILES} ${_ILINKS} kernel-tags: @[ -f .depend ] || { echo "you must make depend first"; exit 1; } sh $S/conf/systags.sh kernel-install: .PHONY @if [ ! -f ${KERNEL_KO} ] ; then \ echo "You must build a kernel first." ; \ exit 1 ; \ fi .if exists(${DESTDIR}${KODIR}) -thiskernel=`sysctl -n kern.bootfile` ; \ if [ ! "`dirname "$$thiskernel"`" -ef ${DESTDIR}${KODIR} ] ; then \ chflags -R noschg ${DESTDIR}${KODIR} ; \ rm -rf ${DESTDIR}${KODIR} ; \ rm -rf ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ; \ else \ if [ -d ${DESTDIR}${KODIR}.old ] ; then \ chflags -R noschg ${DESTDIR}${KODIR}.old ; \ rm -rf ${DESTDIR}${KODIR}.old ; \ fi ; \ mv ${DESTDIR}${KODIR} ${DESTDIR}${KODIR}.old ; \ if [ -n "${KERN_DEBUGDIR}" -a \ -d ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ]; then \ rm -rf ${DESTDIR}${KERN_DEBUGDIR}${KODIR}.old ; \ mv ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ${DESTDIR}${KERN_DEBUGDIR}${KODIR}.old ; \ fi ; \ sysctl kern.bootfile=${DESTDIR}${KODIR}.old/"`basename "$$thiskernel"`" ; \ fi .endif mkdir -p ${DESTDIR}${KODIR} ${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO} ${DESTDIR}${KODIR}/ .if defined(DEBUG) && !defined(INSTALL_NODEBUG) && ${MK_KERNEL_SYMBOLS} != "no" mkdir -p ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO}.debug ${DESTDIR}${KERN_DEBUGDIR}${KODIR}/ .endif .if defined(KERNEL_EXTRA_INSTALL) ${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_EXTRA_INSTALL} ${DESTDIR}${KODIR}/ .endif kernel-reinstall: @-chflags -R noschg ${DESTDIR}${KODIR} ${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO} ${DESTDIR}${KODIR}/ .if defined(DEBUG) && !defined(INSTALL_NODEBUG) && ${MK_KERNEL_SYMBOLS} != "no" ${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO}.debug ${DESTDIR}${KERN_DEBUGDIR}${KODIR}/ .endif config.o env.o hints.o vers.o vnode_if.o: ${NORMAL_C} ${NORMAL_CTFCONVERT} config.ln env.ln hints.ln vers.ln vnode_if.ln: ${NORMAL_LINT} vers.c: $S/conf/newvers.sh $S/sys/param.h ${SYSTEM_DEP} MAKE=${MAKE} sh $S/conf/newvers.sh ${KERN_IDENT} vnode_if.c: $S/tools/vnode_if.awk $S/kern/vnode_if.src ${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -c vnode_if.h vnode_if_newproto.h vnode_if_typedef.h: $S/tools/vnode_if.awk \ $S/kern/vnode_if.src vnode_if.h: vnode_if_newproto.h vnode_if_typedef.h ${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -h vnode_if_newproto.h: ${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -p vnode_if_typedef.h: ${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -q .if ${MFS_IMAGE:Uno} != "no" .if empty(MD_ROOT_SIZE_CONFIGURED) # Generate an object file from the file system image to embed in the kernel # via linking. Make sure the contents are in the mfs section and rename the # start/end/size variables to __start_mfs, __stop_mfs, and mfs_size, # respectively. embedfs_${MFS_IMAGE:T:R}.o: ${MFS_IMAGE} ${OBJCOPY} --input-target binary \ --output-target ${EMBEDFS_FORMAT.${MACHINE_ARCH}} \ --binary-architecture ${EMBEDFS_ARCH.${MACHINE_ARCH}} \ ${MFS_IMAGE} ${.TARGET} ${OBJCOPY} \ --rename-section .data=mfs,contents,alloc,load,readonly,data \ --redefine-sym \ _binary_${MFS_IMAGE:C,[^[:alnum:]],_,g}_size=__mfs_root_size \ --redefine-sym \ _binary_${MFS_IMAGE:C,[^[:alnum:]],_,g}_start=mfs_root \ --redefine-sym \ _binary_${MFS_IMAGE:C,[^[:alnum:]],_,g}_end=mfs_root_end \ ${.TARGET} .endif .endif # XXX strictly, everything depends on Makefile because changes to ${PROF} # only appear there, but we don't handle that. .include "kern.mk" Index: head/sys/modules/Makefile =================================================================== --- head/sys/modules/Makefile (revision 301813) +++ head/sys/modules/Makefile (revision 301814) @@ -1,790 +1,794 @@ # $FreeBSD$ SYSDIR?=${.CURDIR}/.. .include "${SYSDIR}/conf/kern.opts.mk" SUBDIR_PARALLEL= # Modules that include binary-only blobs of microcode should be selectable by # MK_SOURCELESS_UCODE option (see below). .if defined(MODULES_OVERRIDE) && !defined(ALL_MODULES) SUBDIR=${MODULES_OVERRIDE} .else SUBDIR= \ ${_3dfx} \ ${_3dfx_linux} \ ${_aac} \ ${_aacraid} \ accf_data \ accf_dns \ accf_http \ acl_nfs4 \ acl_posix1e \ ${_acpi} \ ae \ ${_aesni} \ age \ ${_agp} \ aha \ ${_ahb} \ ahci \ ${_aic} \ aic7xxx \ alc \ ale \ alq \ ${_amdsbwd} \ ${_amdtemp} \ amr \ ${_an} \ ${_aout} \ ${_apm} \ ${_arcmsr} \ ${_arcnet} \ ${_asmc} \ ata \ ath \ ath_pci \ ${_autofs} \ ${_auxio} \ ${_bce} \ bfe \ bhnd \ bge \ bhnd \ ${_bxe} \ ${_bios} \ ${_bktr} \ ${_bm} \ bridgestp \ bwi \ bwn \ bwn_pci \ cam \ ${_canbepm} \ ${_canbus} \ ${_cardbus} \ ${_carp} \ cas \ ${_cbb} \ cc \ cd9660 \ cd9660_iconv \ ${_ce} \ ${_cfi} \ ${_ciss} \ cloudabi \ ${_cloudabi64} \ ${_cm} \ ${_cmx} \ ${_coff} \ ${_coretemp} \ ${_cp} \ ${_cpsw} \ ${_cpuctl} \ ${_cpufreq} \ ${_crypto} \ ${_cryptodev} \ ${_cs} \ ${_ct} \ ${_ctau} \ ctl \ ${_cxgb} \ ${_cxgbe} \ dc \ dcons \ dcons_crom \ de \ ${_dpms} \ ${_dpt} \ ${_drm} \ ${_drm2} \ dummynet \ ${_ed} \ ${_elink} \ ${_em} \ en \ ${_ep} \ ${_epic} \ esp \ ${_et} \ ${_ex} \ ${_exca} \ ext2fs \ ${_fatm} \ fdc \ fdescfs \ ${_fe} \ filemon \ firewire \ firmware \ fuse \ ${_fxp} \ gem \ geom \ ${_glxiic} \ ${_glxsb} \ gpio \ hatm \ hifn \ hme \ ${_hpt27xx} \ ${_hptiop} \ ${_hptmv} \ ${_hptnr} \ ${_hptrr} \ hwpmc \ ${_hyperv} \ i2c \ ${_ibcore} \ ${_ibcs2} \ ${_ichwd} \ ${_ida} \ ${_ie} \ if_bridge \ if_disc \ if_edsc \ ${_if_enc} \ if_epair \ ${_if_gif} \ ${_if_gre} \ ${_if_me} \ if_lagg \ ${_if_ndis} \ ${_if_stf} \ if_tap \ if_tun \ if_vlan \ if_vxlan \ ${_igb} \ ${_iir} \ imgact_binmisc \ ${_io} \ ${_ioat} \ ${_ipoib} \ ${_ipdivert} \ ${_ipfilter} \ ${_ipfw} \ ipfw_nat \ ${_ipmi} \ ip6_mroute_mod \ ip_mroute_mod \ ${_ips} \ ${_ipw} \ ${_ipwfw} \ ${_isci} \ ${_iser} \ isp \ ${_ispfw} \ ${_iwi} \ ${_iwifw} \ ${_iwm} \ ${_iwmfw} \ ${_iwn} \ ${_iwnfw} \ ${_ix} \ ${_ixv} \ ${_ixgb} \ ${_ixl} \ ${_ixlv} \ jme \ joy \ kbdmux \ kgssapi \ kgssapi_krb5 \ khelp \ krpc \ ksyms \ le \ lge \ libalias \ libiconv \ libmbpool \ libmchain \ ${_linprocfs} \ ${_linsysfs} \ ${_linux} \ ${_linux_common} \ ${_linux64} \ linuxkpi \ lmc \ lpt \ mac_biba \ mac_bsdextended \ mac_ifoff \ mac_lomac \ mac_mls \ mac_none \ mac_partition \ mac_portacl \ mac_seeotheruids \ mac_stub \ mac_test \ malo \ mcd \ md \ mdio \ mem \ mfi \ mii \ mlx \ ${_mlx4} \ ${_mlx4ib} \ ${_mlxen} \ ${_mlx5} \ ${_mlx5en} \ ${_mly} \ mmc \ mmcsd \ mpr \ mps \ mpt \ mqueue \ mrsas \ msdosfs \ msdosfs_iconv \ ${_mse} \ msk \ ${_mthca} \ mvs \ mwl \ ${_mwlfw} \ mxge \ my \ ${_nandfs} \ ${_nandsim} \ ${_ncr} \ ${_nctgpio} \ ${_ncv} \ ${_ndis} \ netfpga10g \ ${_netgraph} \ ${_nfe} \ nfscl \ nfscommon \ nfsd \ nfslock \ nfslockd \ nfssvc \ nge \ nmdm \ ${_nsp} \ nullfs \ ${_ntb} \ ${_nvd} \ ${_nvme} \ ${_nvram} \ ${_nxge} \ oce \ otus \ otusfw \ ow \ ${_padlock} \ ${_padlock_rng} \ patm \ ${_pccard} \ ${_pcfclock} \ pcn \ ${_pf} \ ${_pflog} \ ${_pfsync} \ plip \ ${_pmc} \ ${_pms} \ ppbus \ ppc \ ppi \ pps \ procfs \ proto \ pseudofs \ ${_pst} \ pty \ puc \ ${_qlxge} \ ${_qlxgb} \ ${_qlxgbe} \ ral \ ${_ralfw} \ ${_random_fortuna} \ ${_random_yarrow} \ ${_random_other} \ rc4 \ ${_rdma} \ ${_rdrand_rng} \ re \ rl \ rtwn \ ${_rtwnfw} \ ${_s3} \ ${_safe} \ ${_sbni} \ scc \ scd \ ${_scsi_low} \ sdhci \ sdhci_pci \ sem \ send \ ${_sf} \ ${_sfxge} \ sge \ ${_si} \ siba_bwn \ siftr \ siis \ sis \ sk \ smbfs \ sn \ ${_snc} \ snp \ sound \ ${_speaker} \ ${_splash} \ ${_sppp} \ ste \ ${_stg} \ stge \ ${_streams} \ ${_svr4} \ ${_sym} \ ${_syscons} \ sysvipc \ ${_ti} \ - tcp/fastpath \ + ${_tcp_fastpath} \ tests/framework \ tests/callout_test \ tl \ tmpfs \ ${_toecore} \ ${_tpm} \ trm \ ${_twa} \ twe \ tws \ tx \ ${_txp} \ uart \ ubsec \ udf \ udf_iconv \ ufs \ unionfs \ urtwn \ ${_urtwnfw} \ usb \ utopia \ ${_vesa} \ ${_virtio} \ vge \ ${_viawd} \ videomode \ vkbd \ ${_vmm} \ ${_vmware} \ ${_vpo} \ vr \ vte \ vx \ ${_vxge} \ wb \ ${_wbwd} \ ${_wds} \ ${_wi} \ ${_wl} \ wlan \ wlan_acl \ wlan_amrr \ wlan_ccmp \ wlan_rssadapt \ wlan_tkip \ wlan_wep \ wlan_xauth \ ${_wpi} \ ${_wpifw} \ ${_x86bios} \ ${_xe} \ xl \ zlib .if ${MK_AUTOFS} != "no" || defined(ALL_MODULES) _autofs= autofs .endif .if ${MK_CDDL} != "no" || defined(ALL_MODULES) .if (${MACHINE_CPUARCH} != "arm" || ${MACHINE_ARCH:Marmv6*} != "") && \ ${MACHINE_CPUARCH} != "mips" && \ ${MACHINE_CPUARCH} != "sparc64" SUBDIR+= dtrace .endif SUBDIR+= opensolaris .endif .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) .if exists(${.CURDIR}/../opencrypto) _crypto= crypto _cryptodev= cryptodev _random_fortuna=random_fortuna _random_yarrow= random_yarrow _random_other= random_other .endif .endif .if ${MK_CUSE} != "no" || defined(ALL_MODULES) SUBDIR+= cuse +.endif + +.if ${MK_EXTRA_TCP_STACKS} != "no" || defined(ALL_MODULES) +_tcp_fastpath= tcp/fastpath .endif .if (${MK_INET_SUPPORT} != "no" || ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _carp= carp _toecore= toecore _if_enc= if_enc _if_gif= if_gif _if_gre= if_gre .endif .if (${MK_INET_SUPPORT} != "no" && ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _if_stf= if_stf .endif .if ${MK_INET_SUPPORT} != "no" || defined(ALL_MODULES) _if_me= if_me _ipdivert= ipdivert _ipfw= ipfw .endif .if ${MK_IPFILTER} != "no" || defined(ALL_MODULES) _ipfilter= ipfilter .endif .if ${MK_ISCSI} != "no" || defined(ALL_MODULES) SUBDIR+= iscsi SUBDIR+= iscsi_initiator .endif .if ${MK_NAND} != "no" || defined(ALL_MODULES) _nandfs= nandfs _nandsim= nandsim .endif .if ${MK_NETGRAPH} != "no" || defined(ALL_MODULES) _netgraph= netgraph .endif .if (${MK_PF} != "no" && (${MK_INET_SUPPORT} != "no" || \ ${MK_INET6_SUPPORT} != "no")) || defined(ALL_MODULES) _pf= pf _pflog= pflog .if ${MK_INET_SUPPORT} != "no" _pfsync= pfsync .endif .endif .if ${MK_SOURCELESS_UCODE} != "no" _bce= bce _fatm= fatm _fxp= fxp _ispfw= ispfw _mwlfw= mwlfw _ralfw= ralfw _rtwnfw= rtwnfw _urtwnfw= urtwnfw _sf= sf _ti= ti _txp= txp .endif .if ${MK_SOURCELESS_UCODE} != "no" && ${MACHINE_CPUARCH} != "arm" && \ ${MACHINE_ARCH:C/mips(el)?/mips/} != "mips" && \ ${MACHINE_ARCH} != "powerpc" && ${MACHINE_CPUARCH} != "riscv" _cxgbe= cxgbe .endif .if ${MK_ZFS} != "no" || defined(ALL_MODULES) SUBDIR+= zfs .endif .if ${MACHINE_CPUARCH} != "aarch64" && ${MACHINE_CPUARCH} != "arm" && \ ${MACHINE_CPUARCH} != "mips" && ${MACHINE_CPUARCH} != "powerpc" && \ ${MACHINE_CPUARCH} != "riscv" _syscons= syscons _vpo= vpo .endif .if ${MACHINE_CPUARCH} != "mips" # no BUS_SPACE_UNSPECIFIED # No barrier instruction support (specific to this driver) _sym= sym # intr_disable() is a macro, causes problems .if ${MK_SOURCELESS_UCODE} != "no" _cxgb= cxgb .endif .endif .if ${MACHINE_CPUARCH} == "aarch64" _em= em _igb= igb .endif .if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64" _agp= agp _an= an _aout= aout _bktr= bktr _bxe= bxe _cardbus= cardbus _cbb= cbb _cpuctl= cpuctl _cpufreq= cpufreq _cs= cs _dpms= dpms _drm= drm _drm2= drm2 _ed= ed _em= em _ep= ep _et= et _exca= exca _fe= fe .if ${MK_OFED} != "no" || defined(ALL_MODULES) _ibcore= ibcore .endif _if_ndis= if_ndis _igb= igb _io= io .if ${MK_OFED} != "no" || defined(ALL_MODULES) _ipoib= ipoib _iser= iser .endif _ix= ix _ixv= ixv _linprocfs= linprocfs _linsysfs= linsysfs _linux= linux _nctgpio= nctgpio _ndis= ndis _pccard= pccard .if ${MK_OFED} != "no" || defined(ALL_MODULES) _rdma= rdma .endif _safe= safe _scsi_low= scsi_low _si= si _speaker= speaker _splash= splash _sppp= sppp _vmware= vmware _vxge= vxge _wbwd= wbwd _wi= wi _xe= xe .if ${MACHINE} != "pc98" _aac= aac _aacraid= aacraid _acpi= acpi .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) _aesni= aesni .endif _amdsbwd= amdsbwd _amdtemp= amdtemp _arcmsr= arcmsr _asmc= asmc _ciss= ciss _cmx= cmx _coretemp= coretemp .if ${MK_SOURCELESS_HOST} != "no" _hpt27xx= hpt27xx .endif _hptiop= hptiop .if ${MK_SOURCELESS_HOST} != "no" _hptmv= hptmv _hptnr= hptnr _hptrr= hptrr .endif _hyperv= hyperv _ichwd= ichwd _ida= ida _iir= iir _ipmi= ipmi _ips= ips _isci= isci _ipw= ipw _iwi= iwi _iwm= iwm _iwn= iwn _ixgb= ixgb .if ${MK_SOURCELESS_UCODE} != "no" _ipwfw= ipwfw _iwifw= iwifw _iwmfw= iwmfw _iwnfw= iwnfw .endif .if ${MK_OFED} != "no" || defined(ALL_MODULES) _mlx4= mlx4 _mlx4ib= mlx4ib _mlxen= mlxen .endif _mlx5= mlx5 .if (${MK_INET_SUPPORT} != "no" && ${MK_INET6_SUPPORT} != "no") || \ defined(ALL_MODULES) _mlx5en= mlx5en .endif _mly= mly .if ${MK_OFED} != "no" || defined(ALL_MODULES) _mthca= mthca .endif _nfe= nfe _nvd= nvd _nvme= nvme _nvram= nvram _nxge= nxge .if ${MK_CRYPT} != "no" || defined(ALL_MODULES) _padlock= padlock _padlock_rng= padlock_rng _rdrand_rng= rdrand_rng .endif _s3= s3 _tpm= tpm _twa= twa _vesa= vesa _viawd= viawd _virtio= virtio _wpi= wpi .if ${MK_SOURCELESS_UCODE} != "no" _wpifw= wpifw .endif _x86bios= x86bios .endif .endif .if ${MACHINE_CPUARCH} == "amd64" _ioat= ioat _ixl= ixl _ixlv= ixlv _linux64= linux64 _linux_common= linux_common _ntb= ntb _pms= pms _qlxge= qlxge _qlxgb= qlxgb _qlxgbe= qlxgbe _sfxge= sfxge .if ${MK_BHYVE} != "no" || defined(ALL_MODULES) _vmm= vmm .endif .endif .if ${MACHINE_CPUARCH} == "i386" # XXX some of these can move to the general case when de-i386'ed # XXX some of these can move now, but are untested on other architectures. _3dfx= 3dfx _3dfx_linux= 3dfx_linux _aic= aic _apm= apm _arcnet= arcnet .if ${MK_SOURCELESS_UCODE} != "no" _ce= ce .endif _coff= coff .if ${MK_SOURCELESS_UCODE} != "no" _cp= cp .endif _elink= elink _glxiic= glxiic _glxsb= glxsb #_ibcs2= ibcs2 _ie= ie _mse= mse _ncr= ncr _ncv= ncv _nsp= nsp _pcfclock= pcfclock _pst= pst _sbni= sbni _streams= streams _stg= stg _svr4= svr4 _wds= wds .if ${MACHINE} == "i386" .if ${MK_EISA} != "no" _ahb= ahb .endif _bios= bios _cm= cm .if ${MK_SOURCELESS_UCODE} != "no" _ctau= ctau .endif _dpt= dpt _ex= ex _wl= wl .elif ${MACHINE} == "pc98" _canbepm= canbepm _canbus= canbus _ct= ct _pmc= pmc _snc= snc .endif .endif .if ${MACHINE_CPUARCH} == "arm" _cfi= cfi _cpsw= cpsw .endif .if ${MACHINE_CPUARCH} == "powerpc" _agp= agp _an= an _bm= bm _cardbus= cardbus _cbb= cbb _cfi= cfi _cpufreq= cpufreq _drm= drm _exca= exca _nvram= powermac_nvram _pccard= pccard _wi= wi .endif .if ${MACHINE_ARCH} == "powerpc64" _drm2= drm2 .endif .if ${MACHINE_CPUARCH} == "sparc64" _auxio= auxio _em= em _epic= epic _igb= igb .endif .if ${MACHINE_CPUARCH} == "aarch64" || ${MACHINE_CPUARCH} == "amd64" _cloudabi64= cloudabi64 .endif .endif SUBDIR+=${MODULES_EXTRA} .for reject in ${WITHOUT_MODULES} SUBDIR:= ${SUBDIR:N${reject}} .endfor # Calling kldxref(8) for each module is expensive. .if !defined(NO_XREF) .MAKEFLAGS+= -DNO_XREF afterinstall: .PHONY @if type kldxref >/dev/null 2>&1; then \ ${ECHO} kldxref ${DESTDIR}${KMODDIR}; \ kldxref ${DESTDIR}${KMODDIR}; \ fi .endif .include "${SYSDIR}/conf/config.mk" SUBDIR:= ${SUBDIR:u:O} .include