Index: head/sys/mips/conf/MEDIATEK
===================================================================
--- head/sys/mips/conf/MEDIATEK	(nonexistent)
+++ head/sys/mips/conf/MEDIATEK	(revision 298057)
@@ -0,0 +1,81 @@
+#
+# MEDIATEK -- Kernel configuration file for FreeBSD/MIPS Mediatek/Ralink SoCs
+#
+# This includes all the configurable parts of the kernel. Please read through
+# the sections below and customize the options to fit your board if needed.
+#
+# $FreeBSD$
+#
+
+#NO_UNIVERSE
+
+# Don't build any modules by default
+makeoptions 	MODULES_OVERRIDE=""
+
+#
+# Default rootfs device configuration, should be changed to suit target board
+#
+options 	ROOTDEVNAME=\"ufs:md0.uzip\"
+
+#
+# Optional drivers section
+#
+# What follows is optional support drivers for the Mediatek SoCs.
+# The kernel can be compiled without them if size is a concern.
+# All optional drivers are built by default.
+#
+
+# Support geom_uzip(4) compressed disk images
+device 		geom_uzip
+options 	GEOM_UZIP
+
+# Support md(4) and md-based rootfs
+device 		md
+options 	MD_ROOT
+
+# SPI and SPI flash support
+device 		spibus
+device 		mx25l
+
+# GPIO and gpioled support
+device 		gpio
+device 		gpioled
+
+# PCI support
+device 		pci
+
+#
+# USB (ehci, ohci, xhci, otg) support. Unneeded drivers can be commented in
+# order to lower kernel size. See below for driver SoC support.
+#
+# For all SoCs that require USB support
+device 		usb
+# For RT3050, RT3052 and RT3350 SoCs
+device 		dwcotg
+# For RT3352, RT3662, RT3883, RT5350, MT7620, MT7628 and MT7688
+device 		ohci
+device 		ehci
+# For MT7621, or cases where the target board has a XHCI controller on PCI
+# (for example Asus RT-N65U)
+device 		xhci
+
+# USB umass(4) storage and da(4) support
+device 		umass
+device 		da
+
+# ahci(4) and ada(4) support, depends on PCI
+device 		ahci
+device 		ada
+
+# CAM support, required if either umass(4) or ahci(4) is enabled above
+device 		pass
+device 		scbus
+
+# Ethernet, BPS and bridge support
+device 		rt
+device 		bpf
+device 		if_bridge
+
+# Extres
+device 		ext_resources
+device 		clk

Property changes on: head/sys/mips/conf/MEDIATEK
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/sys/mips/conf/MEDIATEK_BASE
===================================================================
--- head/sys/mips/conf/MEDIATEK_BASE	(nonexistent)
+++ head/sys/mips/conf/MEDIATEK_BASE	(revision 298057)
@@ -0,0 +1,89 @@
+#
+# MEDIATEK_BASE -- Base kernel configuration file for FreeBSD/MIPS
+# Mediatek/Ralink SoCs.
+#
+# This includes all the required drivers for the SoCs.
+# Ususally, users should not build this kernel configuration. It is provided
+# only as a minimum base, from which customizations can be made. Please look
+# at MEDIATEK kernel configuration for customization details.
+#
+# $FreeBSD$
+#
+
+#NO_UNIVERSE
+
+# Include the standard file list for Mediatek SoCs.
+files 		"../mediatek/files.mtk"
+
+# Building a mips/mipsel kernel
+machine 	mips mipsel
+
+# Little-endian machine
+makeoptions 	MIPS_LITTLE_ENDIAN=defined
+
+# Default kernel load address
+makeoptions 	KERNLOADADDR=0x80001000
+
+# Mediatek/Ralink SoC support depends on FDT (with static DTB for the moment)
+options 	FDT
+options 	FDT_DTB_STATIC
+
+# We rely on MIPS_INTRNG code
+options 	MIPS_INTRNG
+options 	MIPS_NIRQ=256
+
+# We rely on NEW_PCIB code
+options 	NEW_PCIB
+
+# Build kernel with gdb(1) debug symbols
+makeoptions 	DEBUG=-g
+
+# Support for DDB and KDB
+options 	DDB
+options 	KDB
+
+# Debugging for use in -current
+options 	INVARIANTS
+options 	INVARIANT_SUPPORT
+options 	WITNESS
+options 	WITNESS_SKIPSPIN
+options 	DEBUG_REDZONE
+options 	DEBUG_MEMGUARD
+
+# For small memory footprints
+options 	VM_KMEM_SIZE_SCALE=1
+
+# General options, including scheduler, etc.
+options 	SCHED_ULE	# ULE scheduler
+options 	INET		# InterNETworking
+#options 	INET6		# IPv6
+options 	PSEUDOFS	# Pseude-filesystem framework
+options 	FFS		# Berkeley Fast Filesystem
+#options 	SOFTUPDATES	# Enable FFS soft updates support
+#options 	UFS_ACL		# Support for access control lists
+#options 	UFS_DIRHASH	# Improve big directory performance
+#options 	MSDOSFS		# Enable support for MSDOS filesystems
+options 	_KPOSIX_PRIORITY_SCHEDULING	# Posix P1003_1B real-time ext.
+
+#
+# Standard drivers section
+#
+# The drivers in the following section are required in order to successfully
+# compile the kernel.
+#
+
+# FDT clock and pinctrl framework
+device 		fdt_clock
+device 		fdt_pinctrl
+
+# UART support
+device 		uart
+
+# random support
+device 		random
+
+# loop device support
+device 		loop
+
+# ether device support
+device 		ether

Property changes on: head/sys/mips/conf/MEDIATEK_BASE
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/sys/mips/conf/MT7620A_FDT
===================================================================
--- head/sys/mips/conf/MT7620A_FDT	(nonexistent)
+++ head/sys/mips/conf/MT7620A_FDT	(revision 298057)
@@ -0,0 +1,30 @@
+#
+# MT7620A_FDT -- Kernel configuration file for FreeBSD/MIPS MT7620A SoC
+#
+# This includes all the configurable parts of the kernel. Please read through
+# MEDIATEK kernel config and customize the options to fit your board if needed.
+#
+# $FreeBSD$
+#
+
+#NO_UNIVERSE
+
+#
+# FDT_DTS_FILE should be modified to suit the target board type.
+#
+#makeoptions 	FDT_DTS_FILE=MT7620a.dts
+
+#
+# The user should never have to edit what's below this line.
+# If customizations are needed, they should be done to the MEDIATEK kernel
+# configuration.
+#
+
+# Start with a base configuration
+include 	MEDIATEK_BASE
+
+ident 		MT7620A
+cpu 		CPU_MIPS24K
+
+# Include optional configuration (to be edited by the user if needed)
+include 	MEDIATEK

Property changes on: head/sys/mips/conf/MT7620A_FDT
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/sys/mips/conf/MT7620N_FDT
===================================================================
--- head/sys/mips/conf/MT7620N_FDT	(nonexistent)
+++ head/sys/mips/conf/MT7620N_FDT	(revision 298057)
@@ -0,0 +1,30 @@
+#
+# MT7620N_FDT -- Kernel configuration file for FreeBSD/MIPS MT7620N SoC
+#
+# This includes all the configurable parts of the kernel. Please read through
+# MEDIATEK kernel config and customize the options to fit your board if needed.
+#
+# $FreeBSD$
+#
+
+#NO_UNIVERSE
+
+#
+# FDT_DTS_FILE should be modified to suit the target board type.
+#
+#makeoptions 	FDT_DTS_FILE=WRTNODE.dts
+
+#
+# The user should never have to edit what's below this line.
+# If customizations are needed, they should be done to the MEDIATEK kernel
+# configuration.
+#
+
+# Start with a base configuration
+include 	MEDIATEK_BASE
+
+ident 		MT7620N
+cpu 		CPU_MIPS24K
+
+# Include optional configuration (to be edited by the user if needed)
+include 	MEDIATEK

Property changes on: head/sys/mips/conf/MT7620N_FDT
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/sys/mips/conf/MT7621_FDT
===================================================================
--- head/sys/mips/conf/MT7621_FDT	(nonexistent)
+++ head/sys/mips/conf/MT7621_FDT	(revision 298057)
@@ -0,0 +1,30 @@
+#
+# MT7621_FDT -- Kernel configuration file for FreeBSD/MIPS MT7621 SoC
+#
+# This includes all the configurable parts of the kernel. Please read through
+# MEDIATEK kernel config and customize the options to fit your board if needed.
+#
+# $FreeBSD$
+#
+
+#NO_UNIVERSE
+
+#
+# FDT_DTS_FILE should be modified to suit the target board type.
+#
+#makeoptions 	FDT_DTS_FILE=ZBT-WG2626.dts
+
+#
+# The user should never have to edit what's below this line.
+# If customizations are needed, they should be done to the MEDIATEK kernel
+# configuration.
+#
+
+# Start with a base configuration
+include 	MEDIATEK_BASE
+
+ident 		MT7621
+cpu 		CPU_MIPS1004K
+
+# Include optional configuration (to be edited by the user if needed)
+include 	MEDIATEK

Property changes on: head/sys/mips/conf/MT7621_FDT
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/sys/mips/conf/MT7628_FDT
===================================================================
--- head/sys/mips/conf/MT7628_FDT	(nonexistent)
+++ head/sys/mips/conf/MT7628_FDT	(revision 298057)
@@ -0,0 +1,30 @@
+#
+# MT7628_FDT -- Kernel configuration file for FreeBSD/MIPS MT7628/MT7688 SoCs
+#
+# This includes all the configurable parts of the kernel. Please read through
+# MEDIATEK kernel config and customize the options to fit your board if needed.
+#
+# $FreeBSD$
+#
+
+#NO_UNIVERSE
+
+#
+# FDT_DTS_FILE should be modified to suit the target board type.
+#
+#makeoptions 	FDT_DTS_FILE=MT7628.dts
+
+#
+# The user should never have to edit what's below this line.
+# If customizations are needed, they should be done to the MEDIATEK kernel
+# configuration.
+#
+
+# Start with a base configuration
+include 	MEDIATEK_BASE
+
+ident 		MT7628
+cpu 		CPU_MIPS24K
+
+# Include optional configuration (to be edited by the user if needed)
+include 	MEDIATEK

Property changes on: head/sys/mips/conf/MT7628_FDT
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/sys/mips/conf/RT3050_FDT
===================================================================
--- head/sys/mips/conf/RT3050_FDT	(nonexistent)
+++ head/sys/mips/conf/RT3050_FDT	(revision 298057)
@@ -0,0 +1,31 @@
+#
+# RT3050_FDT -- Kernel configuration file for FreeBSD/MIPS RT3050/RT3052/RT3350
+# SoCs
+#
+# This includes all the configurable parts of the kernel. Please read through
+# MEDIATEK kernel config and customize the options to fit your board if needed.
+#
+# $FreeBSD$
+#
+
+#NO_UNIVERSE
+
+#
+# FDT_DTS_FILE should be modified to suit the target board type.
+#
+#makeoptions 	FDT_DTS_FILE=DIR-600-B1.dts
+
+#
+# The user should never have to edit what's below this line.
+# If customizations are needed, they should be done to the MEDIATEK kernel
+# configuration.
+#
+
+# Start with a base configuration
+include 	MEDIATEK_BASE
+
+ident 		RT3050
+cpu 		CPU_MIPS24K
+
+# Include optional configuration (to be edited by the user if needed)
+include 	MEDIATEK

Property changes on: head/sys/mips/conf/RT3050_FDT
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/sys/mips/conf/RT3352_FDT
===================================================================
--- head/sys/mips/conf/RT3352_FDT	(nonexistent)
+++ head/sys/mips/conf/RT3352_FDT	(revision 298057)
@@ -0,0 +1,30 @@
+#
+# RT3352_FDT -- Kernel configuration file for FreeBSD/MIPS RT3352 SoC
+#
+# This includes all the configurable parts of the kernel. Please read through
+# MEDIATEK kernel config and customize the options to fit your board if needed.
+#
+# $FreeBSD$
+#
+
+#NO_UNIVERSE
+
+#
+# FDT_DTS_FILE should be modified to suit the target board type.
+#
+#makeoptions 	FDT_DTS_FILE=DIR-615-H1.dts
+
+#
+# The user should never have to edit what's below this line.
+# If customizations are needed, they should be done to the MEDIATEK kernel
+# configuration.
+#
+
+# Start with a base configuration
+include 	MEDIATEK_BASE
+
+ident 		RT3352
+cpu 		CPU_MIPS24K
+
+# Include optional configuration (to be edited by the user if needed)
+include 	MEDIATEK

Property changes on: head/sys/mips/conf/RT3352_FDT
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/sys/mips/conf/RT3883_FDT
===================================================================
--- head/sys/mips/conf/RT3883_FDT	(nonexistent)
+++ head/sys/mips/conf/RT3883_FDT	(revision 298057)
@@ -0,0 +1,30 @@
+#
+# RT3883_FDT -- Kernel configuration file for FreeBSD/MIPS RT3662/RT3883 SoCs
+#
+# This includes all the configurable parts of the kernel. Please read through
+# MEDIATEK kernel config and customize the options to fit your board if needed.
+#
+# $FreeBSD$
+#
+
+#NO_UNIVERSE
+
+#
+# FDT_DTS_FILE should be modified to suit the target board type.
+#
+#makeoptions 	FDT_DTS_FILE=DIR-645.dts
+
+#
+# The user should never have to edit what's below this line.
+# If customizations are needed, they should be done to the MEDIATEK kernel
+# configuration.
+#
+
+# Start with a base configuration
+include 	MEDIATEK_BASE
+
+ident 		RT3883
+cpu 		CPU_MIPS74K
+
+# Include optional configuration (to be edited by the user if needed)
+include 	MEDIATEK

Property changes on: head/sys/mips/conf/RT3883_FDT
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Index: head/sys/mips/conf/RT5350_FDT
===================================================================
--- head/sys/mips/conf/RT5350_FDT	(nonexistent)
+++ head/sys/mips/conf/RT5350_FDT	(revision 298057)
@@ -0,0 +1,30 @@
+#
+# RT5350_FDT -- Kernel configuration file for FreeBSD/MIPS RT5350 SoC
+#
+# This includes all the configurable parts of the kernel. Please read through
+# MEDIATEK kernel config and customize the options to fit your board if needed.
+#
+# $FreeBSD$
+#
+
+#NO_UNIVERSE
+
+#
+# FDT_DTS_FILE should be modified to suit the target board type.
+#
+#makeoptions 	FDT_DTS_FILE=DIR-300-B7.dts
+
+#
+# The user should never have to edit what's below this line.
+# If customizations are needed, they should be done to the MEDIATEK kernel
+# configuration.
+#
+
+# Start with a base configuration
+include 	MEDIATEK_BASE
+
+ident 		RT5350
+cpu 		CPU_MIPS24K
+
+# Include optional configuration (to be edited by the user if needed)
+include 	MEDIATEK

Property changes on: head/sys/mips/conf/RT5350_FDT
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property