Index: head/sys/mips/conf/DIR-825C1 =================================================================== --- head/sys/mips/conf/DIR-825C1 (revision 295955) +++ head/sys/mips/conf/DIR-825C1 (revision 295956) @@ -1,68 +1,68 @@ # $FreeBSD$ # # Specific board setup for the D-Link DIR-825C1 router. # # The DIR-825C1 has the following hardware: # # + AR9344 CPU SoC 74k MIPS # + ARxxx 2.4GHz 11n # + ARXXX 5GHz 11n # + AR8327 Gigabit switch # + m25p80 based 16MB flash # + 128MB RAM # + uboot environment #NO_UNIVERSE # Include the default AR934x parameters include "AR934X_BASE" ident DIR825C1 # Override hints with board values hints "DIR-825C1.hints" # Force the board memory - the base DB120 has 128MB RAM options AR71XX_REALMEM=(128*1024*1024) # i2c GPIO bus device gpioiic device iicbb device iicbus device iic # Options required for miiproxy and mdiobus options ARGE_MDIO # Export an MDIO bus separate from arge device miiproxy # MDIO bus <-> MII PHY rendezvous device etherswitch device arswitch # read MSDOS formatted disks - USB options MSDOSFS # Enable the uboot environment stuff rather then the # redboot stuff. options AR71XX_ENV_UBOOT # Used for the static uboot partition map device geom_map # uzip - to boot natively from flash -options GEOM_UNCOMPRESS +options GEOM_UZIP options GEOM_PART_GPT # yes, this board has a PCI connected atheros device device ath_pci options AR71XX_ATH_EEPROM device firmware # Used by the above options ATH_EEPROM_FIRMWARE # Boot off of the rootfs, as defined in the geom_map setup. options ROOTDEVNAME=\"ufs:map/rootfs.uzip\" # In order to netboot, you have to build the mfsroot into the kernel # 19443712 or 19M is the biggest rootfs via netboot this thing supports #options MD_ROOT # md device usable as a potential root device #options MD_ROOT_SIZE=19444 #makeoptions MFS_IMAGE=/tftpboot/mfsroot-dir825c1.img.ulzma #options ROOTDEVNAME=\"ufs:md0.uzip\" Index: head/sys/mips/conf/MT7620 =================================================================== --- head/sys/mips/conf/MT7620 (revision 295955) +++ head/sys/mips/conf/MT7620 (revision 295956) @@ -1,149 +1,149 @@ # MT7620 -- Kernel configuration file for FreeBSD/mips for Ralink MT7620 systems # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident MT7620 machine mips mipsel makeoptions MIPS_LITTLE_ENDIAN=defined makeoptions KERNLOADADDR=0x80010000 # Don't build any modules yet. #makeoptions MODULES_OVERRIDE="wlan_xauth wlan_wep wlan_tkip wlan_acl wlan_amrr wlan_ccmp wlan_rssadapt if_bridge bridgestp msdosfs md ipfw dummynet libalias geom/geom_label ufs usb/uplcom usb/u3g usb/umodem usb/umass usb/ucom cam zlib" makeoptions MODULES_OVERRIDE="" makeoptions MT7620 include "../rt305x/std.rt305x" hints "MT7620.hints" #Default places to look for devices. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MT7620 options RT305X_UBOOT # Debugging for use in -current options DEADLKRES #Enable the deadlock resolver options INVARIANTS #Enable calls of extra sanity checking options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS options WITNESS #Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed #options DIAGNOSTIC #options DEBUG_LOCKS #options DEBUG_VFS_LOCKS #options GDB options DDB options KDB options SCHED_ULE #options SCHED_4BSD #4BSD scheduler #options COMPAT_43 options INET #InterNETworking options NFSCL #Network Filesystem Client options NFS_ROOT #NFS usable as /, requires NFSCL options PSEUDOFS #Pseudo-filesystem framework #options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions #options BOOTP #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=rt0 #options BOOTP_COMPAT #options CD9660 # ISO 9660 Filesystem #options ROOTDEVNAME=\"cd9660:/dev/map/rootfs.uzip\" #options TMPFS # TMP Memory Filesystem options FFS #Berkeley Fast Filesystem #options SOFTUPDATES #Enable FFS soft updates support #options UFS_ACL #Support for access control lists #options UFS_DIRHASH #Improve performance on big directories #options ROOTDEVNAME=\"nfs:10.0.0.1:/mnt/bsd\" # Options for making kernel less hangry #makeoptions INLINE_LIMIT=1024 #options MAXUSERS=3 #options MAXFILES=512 #options NSFBUFS=256 #options SHMALL=128 #options MSGBUF_SIZE=65536 # Options for making kernel smallest #options NO_SYSCTL_DESCR # No description string of sysctl #options NO_FFS_SNAPSHOT # Disable Snapshot supporting #options SCSI_NO_SENSE_STRINGS #options SCSI_NO_OP_STRINGS #options RWLOCK_NOINLINE #options SX_NOINLINE #options NO_SWAPPING options MROUTING # Multicast routing options IPFIREWALL_DEFAULT_TO_ACCEPT -options GEOM_UNCOMPRESS +options GEOM_UZIP options MD_ROOT options ROOTDEVNAME=\"ufs:da0s1\" device md device random device loop # RT3050F, RT3052F have only pseudo PHYs, so mii not required device rt device spibus device mx25l device ether device miibus device bpf # Berkeley packet filter device vlan device lagg device if_bridge device uart nodevice uart_ns8250 #device tun # Packet tunnel. #device wlan #device gpio #device gpioled #device cfi # Detect Flash memmory #device cfid #device nvram2env device usb device ehci #device ohci #device dwcotg # DWC like USB OTG Controller driver #device u3g #device umodem #device uplcom device cdce device umass device da device pass device scbus options SCSI_DELAY=1000 # Delay (in ms) before probing SCSI #options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order #options USB_DEBUG #options USB_REQ_DEBUG device pci