Index: head/sys/boot/fdt/dts/riscv/qemu.dts =================================================================== --- head/sys/boot/fdt/dts/riscv/qemu.dts (nonexistent) +++ head/sys/boot/fdt/dts/riscv/qemu.dts (revision 295521) @@ -0,0 +1,92 @@ +/*- + * Copyright (c) 2016 Ruslan Bukin + * All rights reserved. + * + * Portions of this software were developed by SRI International and the + * University of Cambridge Computer Laboratory under DARPA/AFRL contract + * FA8750-10-C-0237 ("CTSRD"), as part of the DARPA CRASH research programme. + * + * Portions of this software were developed by the University of Cambridge + * Computer Laboratory as part of the CTSRD Project, with support from the + * UK Higher Education Innovation Fund (HEIF). + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/dts-v1/; + +/ { + model = "QEMU RV64I"; + compatible = "riscv,rv64i"; + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <1>; + + aliases { + console0 = &console0; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x8000000>; /* 128MB at 0x0 */ + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + #interrupt-cells = <1>; + + compatible = "simple-bus"; + ranges; + + pic0: pic@0 { + compatible = "riscv,pic"; + interrupt-controller; + }; + + timer0: timer@0 { + compatible = "riscv,timer"; + interrupts = < 1 >; + interrupt-parent = < &pic0 >; + clock-frequency = < 400000000 >; + }; + + htif0: htif@0 { + compatible = "riscv,htif"; + interrupts = < 0 >; + interrupt-parent = < &pic0 >; + + console0: console@0 { + compatible = "htif,console"; + status = "okay"; + }; + }; + }; + + chosen { + bootargs = "-v"; + stdin = "console0"; + stdout = "console0"; + }; +}; Property changes on: head/sys/boot/fdt/dts/riscv/qemu.dts ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: head/sys/riscv/conf/GENERIC =================================================================== --- head/sys/riscv/conf/GENERIC (revision 295520) +++ head/sys/riscv/conf/GENERIC (revision 295521) @@ -1,104 +1,101 @@ # # GENERIC -- Generic kernel configuration file for FreeBSD/RISC-V # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ cpu RISCV ident GENERIC makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols # makeoptions WITH_CTF=1 # Run ctfconvert(1) for DTrace support makeoptions NO_MODULES=1 # We don't yet support modules on RISC-V options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options IPSEC # IP (v4/v6) security options TCP_OFFLOAD # TCP offload options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options MD_ROOT # MD is a potential root device options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_GPT # GUID Partition Tables. # options GEOM_RAID # Soft RAID functionality. options GEOM_LABEL # Provides labelization options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support # options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options KBD_INSTALL_CDEV # install a CDEV entry in /dev # options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) options AUDIT # Security event auditing options CAPABILITY_MODE # Capsicum capability mode options CAPABILITIES # Capsicum capabilities options MAC # TrustedBSD MAC Framework # options KDTRACE_FRAME # Ensure frames are compiled in # options KDTRACE_HOOKS # Kernel DTrace hooks # options VFP # Floating-point support options RACCT # Resource accounting framework options RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default options RCTL # Resource limits # options SMP # Debugging support. Always need this: # options KDB # Enable kernel debugger support. # options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use (turn off in stable branch): # options DDB # Support DDB. # options GDB # Support remote GDB. options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS # options WITNESS # Enable checks to detect deadlocks and cycles # options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones options ROOTDEVNAME=\"ufs:/dev/htif_blk0\" # options EARLY_PRINTF # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device firmware # firmware assist module -# RISCVTODO: This needs to be done via loader (when it's available). options FDT -options FDT_DTB_STATIC -makeoptions FDT_DTS_FILE=spike.dts Index: head/sys/riscv/conf/QEMU =================================================================== --- head/sys/riscv/conf/QEMU (nonexistent) +++ head/sys/riscv/conf/QEMU (revision 295521) @@ -0,0 +1,26 @@ +# +# Kernel configuration file for QEMU emulator. +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +include GENERIC +ident QEMU + +# RISCVTODO: This needs to be done via loader (when it's available). +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=qemu.dts Property changes on: head/sys/riscv/conf/QEMU ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: head/sys/riscv/conf/SPIKE =================================================================== --- head/sys/riscv/conf/SPIKE (nonexistent) +++ head/sys/riscv/conf/SPIKE (revision 295521) @@ -0,0 +1,26 @@ +# +# Kernel configuration file for UCB Spike simulator. +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ + +include GENERIC +ident SPIKE + +# RISCVTODO: This needs to be done via loader (when it's available). +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=spike.dts Property changes on: head/sys/riscv/conf/SPIKE ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property