Index: vendor/openresolv/dist/Makefile =================================================================== --- vendor/openresolv/dist/Makefile (revision 295108) +++ vendor/openresolv/dist/Makefile (revision 295109) @@ -1,85 +1,85 @@ PKG= openresolv -VERSION= 3.7.0 +VERSION= 3.7.1 # Nasty hack so that make clean works without configure being run _CONFIG_MK!= test -e config.mk && echo config.mk || echo config-null.mk CONFIG_MK?= ${_CONFIG_MK} include ${CONFIG_MK} SBINDIR?= /sbin SYSCONFDIR?= /etc LIBEXECDIR?= /libexec/resolvconf VARDIR?= /var/run/resolvconf RCDIR?= /etc/rc.d RESTARTCMD?= if ${RCDIR}/\1 status >/dev/null 2>\&1; then \ ${RCDIR}/\1 restart; \ fi INSTALL?= install SED?= sed BINMODE?= 0755 DOCMODE?= 0644 MANMODE?= 0444 RESOLVCONF= resolvconf resolvconf.8 resolvconf.conf.5 SUBSCRIBERS= libc dnsmasq named pdnsd unbound TARGET= ${RESOLVCONF} ${SUBSCRIBERS} SRCS= ${TARGET:C,$,.in,} # pmake SRCS:= ${TARGET:=.in} # gmake SED_SBINDIR= -e 's:@SBINDIR@:${SBINDIR}:g' SED_SYSCONFDIR= -e 's:@SYSCONFDIR@:${SYSCONFDIR}:g' SED_LIBEXECDIR= -e 's:@LIBEXECDIR@:${LIBEXECDIR}:g' SED_VARDIR= -e 's:@VARDIR@:${VARDIR}:g' SED_RCDIR= -e 's:@RCDIR@:${RCDIR}:g' SED_RESTARTCMD= -e 's:@RESTARTCMD \(.*\)@:${RESTARTCMD}:g' DISTPREFIX?= ${PKG}-${VERSION} DISTFILEGZ?= ${DISTPREFIX}.tar.gz -DISTFILE?= ${DISTPREFIX}.tar.bz2 +DISTFILE?= ${DISTPREFIX}.tar.xz FOSSILID?= current .SUFFIXES: .in all: ${TARGET} .in: ${SED} ${SED_SBINDIR} ${SED_SYSCONFDIR} ${SED_LIBEXECDIR} \ ${SED_VARDIR} ${SED_RCDIR} ${SED_RESTARTCMD} \ $< > $@ clean: rm -f ${TARGET} distclean: clean rm -f config.mk ${DISTFILE} installdirs: proginstall: ${TARGET} ${INSTALL} -d ${DESTDIR}${SBINDIR} ${INSTALL} -m ${BINMODE} resolvconf ${DESTDIR}${SBINDIR} ${INSTALL} -d ${DESTDIR}${SYSCONFDIR} test -e ${DESTDIR}${SYSCONFDIR}/resolvconf.conf || \ ${INSTALL} -m ${DOCMODE} resolvconf.conf ${DESTDIR}${SYSCONFDIR} ${INSTALL} -d ${DESTDIR}${LIBEXECDIR} ${INSTALL} -m ${DOCMODE} ${SUBSCRIBERS} ${DESTDIR}${LIBEXECDIR} maninstall: ${INSTALL} -d ${DESTDIR}${MANDIR}/man8 ${INSTALL} -m ${MANMODE} resolvconf.8 ${DESTDIR}${MANDIR}/man8 ${INSTALL} -d ${DESTDIR}${MANDIR}/man5 ${INSTALL} -m ${MANMODE} resolvconf.conf.5 ${DESTDIR}${MANDIR}/man5 install: proginstall maninstall import: rm -rf /tmp/${DISTPREFIX} ${INSTALL} -d /tmp/${DISTPREFIX} - cp README ${SRCS} /tmp/${DISPREFIX} + cp README ${SRCS} /tmp/${DISTPREFIX} dist: fossil tarball --name ${DISTPREFIX} ${FOSSILID} ${DISTFILEGZ} - gunzip -c ${DISTFILEGZ} | bzip2 >${DISTFILE} + gunzip -c ${DISTFILEGZ} | xz >${DISTFILE} rm ${DISTFILEGZ} Index: vendor/openresolv/dist/resolvconf.8.in =================================================================== --- vendor/openresolv/dist/resolvconf.8.in (revision 295108) +++ vendor/openresolv/dist/resolvconf.8.in (revision 295109) @@ -1,306 +1,306 @@ .\" Copyright (c) 2007-2015 Roy Marples .\" All rights reserved .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd April 27, 2014 +.Dd April 27, 2015 .Dt RESOLVCONF 8 .Os .Sh NAME .Nm resolvconf .Nd a framework for managing multiple DNS configurations .Sh SYNOPSIS .Nm .Fl I .Nm .Op Fl m Ar metric .Op Fl p .Op Fl x .Fl a Ar interface Ns Op Ar .protocol .No < Ns Pa file .Nm .Op Fl f .Fl d Ar interface Ns Op Ar .protocol .Nm .Op Fl x .Fl il Ar pattern .Nm .Fl u .Sh DESCRIPTION .Nm manages .Xr resolv.conf 5 files from multiple sources, such as DHCP and VPN clients. Traditionally, the host runs just one client and that updates .Pa /etc/resolv.conf . More modern systems frequently have wired and wireless interfaces and there is no guarantee both are on the same network. With the advent of VPN and other types of networking daemons, many things now contend for the contents of .Pa /etc/resolv.conf . .Pp .Nm solves this by letting the daemon send their .Xr resolv.conf 5 file to .Nm via .Xr stdin 3 with the argument .Fl a Ar interface Ns Op Ar .protocol instead of the filesystem. .Nm then updates .Pa /etc/resolv.conf as it thinks best. When a local resolver other than libc is installed, such as .Xr dnsmasq 8 or .Xr named 8 , then .Nm will supply files that the resolver should be configured to include. .Pp .Nm assumes it has a job to do. In some situations .Nm needs to act as a deterrent to writing to .Pa /etc/resolv.conf . Where this file cannot be made immutable or you just need to toggle this behaviour, .Nm can be disabled by adding .Sy resolvconf Ns = Ns NO to .Xr resolvconf.conf 5 . .Pp .Nm can mark an interfaces .Pa resolv.conf as private. This means that the name servers listed in that .Pa resolv.conf are only used for queries against the domain/search listed in the same file. This only works when a local resolver other than libc is installed. See .Xr resolvconf.conf 5 for how to configure .Nm to use a local name server. .Pp .Nm can mark an interfaces .Pa resolv.conf as exclusive. Only the latest exclusive interface is used for processing, otherwise all are. .Pp When an interface goes down, it should then call .Nm with .Fl d Ar interface.* arguments to delete the .Pa resolv.conf file(s) for all the .Ar protocols on the .Ar interface . .Pp Here are some more options that .Nm has:- .Bl -tag -width indent .It Fl I Initialise the state directory .Pa @VARDIR@ . This only needs to be called if the initial system boot sequence does not automatically clean it out; for example the state directory is moved somewhere other than .Pa /var/run . If used, it should only be called once as early in the system boot sequence as possible and before .Nm is used to add interfaces. .It Fl f Ignore non existant interfaces. Only really useful for deleting interfaces. .It Fl i Ar pattern List the interfaces and protocols, optionally matching .Ar pattern , we have .Pa resolv.conf files for. .It Fl l Ar pattern List the .Pa resolv.conf files we have. If .Ar pattern is specified then we list the files for the interfaces and protocols that match it. .It Fl m Ar metric Set the metric of the interface when adding it, default of 0. Lower metrics take precedence. This affects the default order of interfaces when listed. .It Fl p Marks the interface .Pa resolv.conf as private. .It Fl u Force .Nm to update all its subscribers. .Nm does not update the subscribers when adding a resolv.conf that matches what it already has for that interface. .It Fl x Mark the interface .Pa resolv.conf as exclusive when adding, otherwise only use the latest exclusive interface. .El .Pp .Nm also has some options designed to be used by its subscribers:- .Bl -tag -width indent .It Fl v Echo variables DOMAINS, SEARCH and NAMESERVERS so that the subscriber can configure the resolver easily. .It Fl V Same as .Fl v except that only the information configured in .Xr resolvconf.conf 5 is set. .El .Sh INTERFACE ORDERING For .Nm to work effectively, it has to process the resolv.confs for the interfaces in the correct order. .Nm first processes interfaces from the .Sy interface_order list, then interfaces without a metic and that match the .Sy dynamic_order list, then interfaces with a metric in order and finally the rest in the operating systems lexical order. See .Xr resolvconf.conf 5 for details on these lists. .Sh PROTOCOLS Here are some suggested protocol tags to use for each .Pa resolv.conf file registered on an .Ar interface Ns No :- .Bl -tag -width indent .It dhcp Dynamic Host Configuration Protocol. Initial versions of .Nm did not recommend a .Ar protocol tag be appended to the .Ar interface name. When the protocol is absent, it is assumed to be the DHCP protocol. .It ppp Point-to-Point Protocol. .It ra IPv6 Router Advertisement. .It dhcp6 Dynamic Host Configuration Protocol, version 6. .El .Sh IMPLEMENTATION NOTES If a subscriber has the executable bit then it is executed otherwise it is assumed to be a shell script and sourced into the current environment in a subshell. This is done so that subscribers can remain fast, but are also not limited to the shell language. .Pp Portable subscribers should not use anything outside of .Pa /bin and .Pa /sbin because .Pa /usr and others may not be available when booting. Also, it would be unwise to assume any shell specific features. .Sh ENVIRONMENT .Bl -ohang .It Va IF_METRIC If the .Fl m option is not present then we use .Va IF_METRIC for the metric. .It Va IF_PRIVATE Marks the interface .Pa resolv.conf as private. .It Va IF_EXCLUSIVE Marks the interface .Pa resolv.conf as exclusive. .El .Sh FILES .Bl -ohang .It Pa /etc/resolv.conf.bak Backup file of the original resolv.conf. .It Pa @SYSCONFDIR@/resolvconf.conf Configuration file for .Nm . .It Pa @LIBEXECDIR@ Directory of subscribers which are run every time .Nm adds, deletes or updates. .It Pa @LIBEXECDIR@/libc.d Directory of subscribers which are run after the libc subscriber is run. .It Pa @VARDIR@ State directory for .Nm . .El .Sh HISTORY This implementation of .Nm is called openresolv and is fully command line compatible with Debian's resolvconf, as written by Thomas Hood. .Sh SEE ALSO .Xr resolv.conf 5 , .Xr resolvconf.conf 5 , .Xr resolver 3 , .Xr stdin 3 .Sh AUTHORS .An Roy Marples Aq Mt roy@marples.name .Sh BUGS Please report them to .Lk http://roy.marples.name/projects/openresolv .Pp .Nm does not validate any of the files given to it. .Pp When running a local resolver other than libc, you will need to configure it to include files that .Nm will generate. You should consult .Xr resolvconf.conf 5 for instructions on how to configure your resolver. Index: vendor/openresolv/dist/resolvconf.conf.5.in =================================================================== --- vendor/openresolv/dist/resolvconf.conf.5.in (revision 295108) +++ vendor/openresolv/dist/resolvconf.conf.5.in (revision 295109) @@ -1,313 +1,318 @@ .\" Copyright (c) 2009-2015 Roy Marples .\" All rights reserved .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" -.Dd March 20, 2015 +.Dd May 14, 2015 .Dt RESOLVCONF.CONF 5 .Os .Sh NAME .Nm resolvconf.conf .Nd resolvconf configuration file .Sh DESCRIPTION .Nm is the configuration file for .Xr resolvconf 8 . The .Nm file is a shell script that is sourced by .Xr resolvconf 8 , meaning that .Nm must contain valid shell commands. Listed below are the standard .Nm variables that may be set. If the values contain white space for special shell characters, ensure they are quoted and escaped correctly. .Pp After updating this file, you may wish to run .Nm resolvconf -u to apply the new configuration. .Pp When a dynamically generated list is appended or prepended to, the whole is made unique where left-most wins. .Sh RESOLVCONF OPTIONS .Bl -tag -width indent .It Sy resolvconf Set to NO to disable .Nm resolvconf from running any subscribers. Defaults to YES. .It Sy interface_order These interfaces will always be processed first. If unset, defaults to the following:- .D1 lo lo[0-9]* .It Sy dynamic_order These interfaces will be processed next, unless they have a metric. If unset, defaults to the following:- .D1 tap[0-9]* tun[0-9]* vpn vpn[0-9]* ppp[0-9]* ippp[0-9]* .It Sy local_nameservers If unset, defaults to the following:- .D1 127.* 0.0.0.0 255.255.255.255 ::1 .It Sy search_domains Prepend search domains to the dynamically generated list. .It Sy search_domains_append Append search domains to the dynamically generated list. .It Sy domain_blacklist A list of domains to be removed from consideration. To remove a domain, you can use foo.* To remove a sub domain, you can use *.bar .It Sy name_servers Prepend name servers to the dynamically generated list. You should set this to 127.0.0.1 if you use a local name server other than libc. .It Sy name_servers_append Append name servers to the dynamically generated list. .It Sy name_server_blacklist A list of name servers to be removed from consideration. The default is 0.0.0.0 as some faulty routers send it via DHCP. To remove a block, you can use 192.168.* .It Sy private_interfaces These interfaces name servers will only be queried for the domains listed in their resolv.conf. Useful for VPN domains. +Setting +.Sy private_interfaces Ns ="*" +will stop the forwarding of the root zone and allows the local resolver to +recursively query the root servers directly. +Requires a local nameserver other than libc. This is equivalent to the .Nm resolvconf -p option. .It Sy replace Is a space separated list of replacement keywords. The syntax is this: .Va $keyword Ns / Ns Va $match Ns / Ns Va $replacement .Pp Example, given this resolv.conf: .D1 domain foo.org .D1 search foo.org dead.beef .D1 nameserver 1.2.3.4 .D1 nameserver 2.3.4.5 and this configuaration: .D1 replace="search/foo*/bar.com nameserver/1.2.3.4/5.6.7.8 nameserver/2.3.4.5/" you would get this resolv.conf instead: .D1 domain foo.org .D1 search bar.com .D1 nameserver 5.6.7.8 .It Sy replace_sub Works the same way as .Sy replace except it works on each space separated value rather than the whole line, so it's useful for the replacing a single domain within the search directive. Using the same example resolv.conf and changing .Sy replace to .Sy replace_sub , you would get this resolv.conf instead: .D1 domain foo.org .D1 search bar.com dead.beef .D1 nameserver 5.6.7.8 .It Sy state_dir Override the default state directory of .Pa @VARDIR@ . This should not be changed once .Nm resolvconf is in use unless the old directory is copied to the new one. .El .Sh LIBC OPTIONS The following variables affect .Xr resolv.conf 5 directly:- .Bl -tag -width indent .It Sy resolv_conf Defaults to .Pa /etc/resolv.conf if not set. .It Sy resolv_conf_options A list of libc resolver options, as specified in .Xr resolv.conf 5 . .It Sy resolv_conf_passthrough When set to YES the latest resolv.conf is written to .Sy resolv_conf without any alteration. When set to /dev/null or NULL, .Sy resolv_conf_local_only is defaulted to NO, .Sy local_nameservers -is unset unless overriden and only the information set in +is unset unless overridden and only the information set in .Nm is written to .Sy resolv_conf . .It Sy resolv_conf_sortlist A libc resolver sortlist, as specified in .Xr resolv.conf 5 . .It Sy resolv_conf_local_only If a local name server is configured then the default is just to specify that and ignore all other entries as they will be configured for the local name server. Set this to NO to also list non-local nameservers. This will give you working DNS even if the local nameserver stops functioning at the expense of duplicated server queries. .It Sy append_nameservers Append name servers to the dynamically generated list. .It Sy prepend_nameservers Prepend name servers to the dynamically generated list. .It Sy append_search Append search domains to the dynamically generated list. .It Sy prepend_search Prepend search domains to the dynamically generated list. .El .Sh SUBSCRIBER OPTIONS openresolv ships with subscribers for the name servers .Xr dnsmasq 8 , .Xr named 8 , .Xr pdnsd 8 and .Xr unbound 8 . Each subscriber can create configuration files which should be included in in the subscribers main configuration file. .Pp To disable a subscriber, simply set it's name to NO. For example, to disable the libc subscriber you would set: .D1 libc=NO .Bl -tag -width indent .It Sy dnsmasq_conf This file tells dnsmasq which name servers to use for specific domains. .It Sy dnsmasq_resolv This file tells dnsmasq which name servers to use for global lookups. .Pp Example resolvconf.conf for dnsmasq: .D1 name_servers=127.0.0.1 .D1 dnsmasq_conf=/etc/dnsmasq-conf.conf .D1 dnsmasq_resolv=/etc/dnsmasq-resolv.conf .Pp Example dnsmasq.conf: .D1 listen-address=127.0.0.1 .D1 # If dnsmasq is compiled for DBus then we can take .D1 # advantage of not having to restart dnsmasq. .D1 enable-dbus .D1 conf-file=/etc/dnsmasq-conf.conf .D1 resolv-file=/etc/dnsmasq-resolv.conf .It Sy named_options Include this file in the named options block. This file tells named which name servers to use for global lookups. .It Sy named_zones Include this file in the named global scope, after the options block. This file tells named which name servers to use for specific domains. .Pp Example resolvconf.conf for named: .D1 name_servers=127.0.0.1 .D1 named_options=/etc/named-options.conf .D1 named_zones=/etc/named-zones.conf .Pp Example named.conf: .D1 options { .D1 listen-on { 127.0.0.1; }; .D1 include "/etc/named-options.conf"; .D1 }; .D1 include "/etc/named-zones.conf"; .It Sy pdnsd_conf This is the main pdnsd configuration file which we modify to add our forward domains to. If this variable is not set then we rely on the pdnsd configuration file setup to read .Pa pdnsd_resolv as documented below. .It Sy pdnsd_resolv This file tells pdnsd about global name servers. If this variable is not set then it's written to .Pa pdnsd_conf . .Pp Example resolvconf.conf for pdnsd: .D1 name_servers=127.0.0.1 .D1 pdnsd_conf=/etc/pdnsd.conf .D1 # pdnsd_resolv=/etc/pdnsd-resolv.conf .Pp Example pdnsd.conf: .D1 global { .D1 server_ip = 127.0.0.1; .D1 status_ctl = on; .D1 } .D1 server { .D1 # A server definition is required, even if emtpy. .D1 label="empty"; .D1 proxy_only=on; .D1 # file="/etc/pdnsd-resolv.conf"; .D1 } .It Sy unbound_conf This file tells unbound about specific and global name servers. .It Sy unbound_insecure When set to YES, unbound marks the domains as insecure, thus ignoring DNSSEC. .Pp Example resolvconf.conf for unbound: .D1 name_servers=127.0.0.1 .D1 unbound_conf=/etc/unbound-resolvconf.conf .Pp Example unbound.conf: .D1 include: /etc/unbound-resolvconf.conf .El .Sh SUBSCRIBER INTEGRATION Not all distributions store the files the subscribers need in the same locations. For example, named service scripts have been called named, bind and rc.bind and they could be located in a directory called /etc/rc.d, /etc/init.d or similar. Each subscriber attempts to automatically configure itself, but not every distribution has been catered for. Also, users could equally want to use a different version from the one installed by default, such as bind8 and bind9. -To accomodate this, the subscribers have these files in configurable +To accommodate this, the subscribers have these files in configurable variables, documented below. .Pp .Bl -tag -width indent .It Sy dnsmasq_service Location of the dnsmasq service. .It Sy dnsmasq_restart Command to restart the dnsmasq service. .It Sy dnsmasq_pid Location of the dnsmasq pidfile. .It Sy libc_service Location of the libc service. .It Sy libc_restart Command to restart the libc service. .It Sy named_service Location of the named service. .It Sy named_restart Command to restart the named service. .It Sy pdnsd_restart Command to restart the pdnsd service. .It Sy unbound_service Location of the unbound service. .It Sy unbound_restart Command to restart the unbound service. .It Sy unbound_pid Location of the unbound pidfile. .El .Sh SEE ALSO .Xr resolv.conf 5 , .Xr resolvconf 8 and .Xr sh 1 . .Sh AUTHORS .An Roy Marples Aq Mt roy@marples.name .Sh BUGS Each distribution is a special snowflake and likes to name the same thing differently, namely the named service script. .Pp Please report them to .Lk http://roy.marples.name/projects/openresolv Index: vendor/openresolv/dist/resolvconf.in =================================================================== --- vendor/openresolv/dist/resolvconf.in (revision 295108) +++ vendor/openresolv/dist/resolvconf.in (revision 295109) @@ -1,771 +1,770 @@ #!/bin/sh # Copyright (c) 2007-2015 Roy Marples # All rights reserved # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above # copyright notice, this list of conditions and the following # disclaimer in the documentation and/or other materials provided # with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. RESOLVCONF="$0" SYSCONFDIR=@SYSCONFDIR@ LIBEXECDIR=@LIBEXECDIR@ VARDIR=@VARDIR@ # Disregard dhcpcd setting unset interface_order state_dir # If you change this, change the test in VFLAG and libc.in as well local_nameservers="127.* 0.0.0.0 255.255.255.255 ::1" dynamic_order="tap[0-9]* tun[0-9]* vpn vpn[0-9]* ppp[0-9]* ippp[0-9]*" interface_order="lo lo[0-9]*" name_server_blacklist="0.0.0.0" # Support original resolvconf configuration layout # as well as the openresolv config file if [ -f "$SYSCONFDIR"/resolvconf.conf ]; then . "$SYSCONFDIR"/resolvconf.conf [ -n "$state_dir" ] && VARDIR="$state_dir" elif [ -d "$SYSCONFDIR/resolvconf" ]; then SYSCONFDIR="$SYSCONFDIR/resolvconf" if [ -f "$SYSCONFDIR"/interface-order ]; then interface_order="$(cat "$SYSCONFDIR"/interface-order)" fi fi -TMPDIR="$VARDIR/tmp" IFACEDIR="$VARDIR/interfaces" METRICDIR="$VARDIR/metrics" PRIVATEDIR="$VARDIR/private" EXCLUSIVEDIR="$VARDIR/exclusive" LOCKDIR="$VARDIR/lock" warn() { echo "$*" >&2 } error_exit() { echo "$*" >&2 exit 1 } usage() { cat <<-EOF Usage: ${RESOLVCONF##*/} [options] Inform the system about any DNS updates. Options: -a \$INTERFACE Add DNS information to the specified interface (DNS supplied via stdin in resolv.conf format) -m metric Give the added DNS information a metric -p Mark the interface as private -x Mark the interface as exclusive -d \$INTERFACE Delete DNS information from the specified interface -f Ignore non existant interfaces -I Init the state dir -u Run updates from our current DNS information -l [\$PATTERN] Show DNS information, optionally from interfaces that match the specified pattern -i [\$PATTERN] Show interfaces that have supplied DNS information optionally from interfaces that match the specified pattern -v [\$PATTERN] echo NEWDOMAIN, NEWSEARCH and NEWNS variables to the console -h Show this help cruft EOF [ -z "$1" ] && exit 0 echo error_exit "$*" } echo_resolv() { local line= OIFS="$IFS" [ -n "$1" -a -f "$IFACEDIR/$1" ] || return 1 echo "# resolv.conf from $1" # Our variable maker works of the fact each resolv.conf per interface # is separated by blank lines. # So we remove them when echoing them. while read -r line; do IFS="$OIFS" if [ -n "$line" ]; then # We need to set IFS here to preserve any whitespace IFS='' printf "%s\n" "$line" fi done < "$IFACEDIR/$1" echo IFS="$OIFS" } # Parse resolv.conf's and make variables # for domain name servers, search name servers and global nameservers parse_resolv() { local line= ns= ds= search= d= n= newns= local new=true iface= private=false p= domain= l= islocal= newns= while read -r line; do case "$line" in "# resolv.conf from "*) if ${new}; then iface="${line#\# resolv.conf from *}" new=false if [ -e "$PRIVATEDIR/$iface" ]; then private=true else # Allow expansion cd "$IFACEDIR" private=false for p in $private_interfaces; do case "$iface" in "$p"|"$p":*) private=true; break;; esac done fi fi ;; "nameserver "*) islocal=false for l in $local_nameservers; do case "${line#* }" in $l) islocal=true echo "LOCALNAMESERVERS=\"\$LOCALNAMESERVERS ${line#* }\"" break ;; esac done $islocal || ns="$ns${line#* } " ;; "domain "*) if [ -z "$domain" ]; then domain="${line#* }" echo "DOMAIN=\"$domain\"" fi search="${line#* }" ;; "search "*) search="${line#* }" ;; *) [ -n "$line" ] && continue if [ -n "$ns" -a -n "$search" ]; then newns= for n in $ns; do newns="$newns${newns:+,}$n" done ds= for d in $search; do ds="$ds${ds:+ }$d:$newns" done echo "DOMAINS=\"\$DOMAINS $ds\"" fi echo "SEARCH=\"\$SEARCH $search\"" if ! $private; then echo "NAMESERVERS=\"\$NAMESERVERS $ns\"" fi ns= search= new=true ;; esac done } uniqify() { local result= while [ -n "$1" ]; do case " $result " in *" $1 "*);; *) result="$result $1";; esac shift done echo "${result# *}" } dirname() { local dir= OIFS="$IFS" local IFS=/ set -- $@ IFS="$OIFS" if [ -n "$1" ]; then printf %s . else shift fi while [ -n "$2" ]; do printf "/%s" "$1" shift done printf "\n" } config_mkdirs() { local e=0 f d for f; do [ -n "$f" ] || continue d="$(dirname "$f")" if [ ! -d "$d" ]; then if type install >/dev/null 2>&1; then install -d "$d" || e=$? else mkdir "$d" || e=$? fi fi done return $e } list_resolv() { [ -d "$IFACEDIR" ] || return 0 local report=false list= retval=0 cmd="$1" excl= shift case "$IF_EXCLUSIVE" in [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) if [ -d "$EXCLUSIVEDIR" ]; then cd "$EXCLUSIVEDIR" for i in *; do if [ -f "$i" ]; then list="${i#* }" break fi done fi excl=true ;; *) excl=false ;; esac # If we have an interface ordering list, then use that. # It works by just using pathname expansion in the interface directory. if [ -n "$1" ]; then list="$*" $force || report=true elif ! $excl; then cd "$IFACEDIR" for i in $interface_order; do [ -f "$i" ] && list="$list $i" for ii in "$i":* "$i".*; do [ -f "$ii" ] && list="$list $ii" done done for i in $dynamic_order; do if [ -e "$i" -a ! -e "$METRICDIR/"*" $i" ]; then list="$list $i" fi for ii in "$i":* "$i".*; do if [ -f "$ii" -a ! -e "$METRICDIR/"*" $ii" ]; then list="$list $ii" fi done done if [ -d "$METRICDIR" ]; then cd "$METRICDIR" for i in *; do [ -f "$i" ] && list="$list ${i#* }" done fi list="$list *" fi cd "$IFACEDIR" retval=1 for i in $(uniqify $list); do # Only list interfaces which we really have if ! [ -f "$i" ]; then if $report; then echo "No resolv.conf for interface $i" >&2 retval=2 fi continue fi if [ "$cmd" = i -o "$cmd" = "-i" ]; then printf %s "$i " else echo_resolv "$i" fi [ $? = 0 -a "$retval" = 1 ] && retval=0 done [ "$cmd" = i -o "$cmd" = "-i" ] && echo return $retval } list_remove() { local list= e= l= result= found= retval=0 [ -z "$2" ] && return 0 eval list=\"\$$1\" shift set -f for e; do found=false for l in $list; do case "$e" in $l) found=true;; esac $found && break done if $found; then retval=$(($retval + 1)) else result="$result $e" fi done set +f echo "${result# *}" return $retval } echo_prepend() { echo "# Generated by resolvconf" if [ -n "$search_domains" ]; then echo "search $search_domains" fi for n in $name_servers; do echo "nameserver $n" done echo } echo_append() { echo "# Generated by resolvconf" if [ -n "$search_domains_append" ]; then echo "search $search_domains_append" fi for n in $name_servers_append; do echo "nameserver $n" done echo } replace() { local r= k= f= v= val= sub= while read -r keyword value; do for r in $replace; do k="${r%%/*}" r="${r#*/}" f="${r%%/*}" r="${r#*/}" v="${r%%/*}" case "$keyword" in $k) case "$value" in $f) value="$v";; esac ;; esac done val= for sub in $value; do for r in $replace_sub; do k="${r%%/*}" r="${r#*/}" f="${r%%/*}" r="${r#*/}" v="${r%%/*}" case "$keyword" in $k) case "$sub" in $f) sub="$v";; esac ;; esac done val="$val${val:+ }$sub" done printf "%s %s\n" "$keyword" "$val" done } make_vars() { local newdomains= d= dn= newns= ns= # Clear variables DOMAIN= DOMAINS= SEARCH= NAMESERVERS= LOCALNAMESERVERS= if [ -n "$name_servers" -o -n "$search_domains" ]; then eval "$(echo_prepend | parse_resolv)" fi if [ -z "$VFLAG" ]; then IF_EXCLUSIVE=1 list_resolv -i "$@" >/dev/null || IF_EXCLUSIVE=0 eval "$(list_resolv -l "$@" | replace | parse_resolv)" fi if [ -n "$name_servers_append" -o -n "$search_domains_append" ]; then eval "$(echo_append | parse_resolv)" fi # Ensure that we only list each domain once for d in $DOMAINS; do dn="${d%%:*}" list_remove domain_blacklist "$dn" >/dev/null || continue case " $newdomains" in *" ${dn}:"*) continue;; esac newns= for nd in $DOMAINS; do if [ "$dn" = "${nd%%:*}" ]; then ns="${nd#*:}" while [ -n "$ns" ]; do case ",$newns," in *,${ns%%,*},*) ;; *) list_remove name_server_blacklist \ "${ns%%,*}" >/dev/null \ && newns="$newns${newns:+,}${ns%%,*}";; esac [ "$ns" = "${ns#*,}" ] && break ns="${ns#*,}" done fi done if [ -n "$newns" ]; then newdomains="$newdomains${newdomains:+ }$dn:$newns" fi done DOMAIN="$(list_remove domain_blacklist $DOMAIN)" SEARCH="$(uniqify $SEARCH)" SEARCH="$(list_remove domain_blacklist $SEARCH)" NAMESERVERS="$(uniqify $NAMESERVERS)" NAMESERVERS="$(list_remove name_server_blacklist $NAMESERVERS)" LOCALNAMESERVERS="$(uniqify $LOCALNAMESERVERS)" LOCALNAMESERVERS="$(list_remove name_server_blacklist $LOCALNAMESERVERS)" echo "DOMAIN='$DOMAIN'" echo "SEARCH='$SEARCH'" echo "NAMESERVERS='$NAMESERVERS'" echo "LOCALNAMESERVERS='$LOCALNAMESERVERS'" echo "DOMAINS='$newdomains'" } force=false VFLAG= while getopts a:Dd:fhIilm:puvVx OPT; do case "$OPT" in f) force=true;; h) usage;; m) IF_METRIC="$OPTARG";; p) IF_PRIVATE=1;; V) VFLAG=1 if [ "$local_nameservers" = \ "127.* 0.0.0.0 255.255.255.255 ::1" ] then local_nameservers= fi ;; x) IF_EXCLUSIVE=1;; '?') ;; *) cmd="$OPT"; iface="$OPTARG";; esac done shift $(($OPTIND - 1)) args="$iface${iface:+ }$*" # -I inits the state dir if [ "$cmd" = I ]; then if [ -d "$VARDIR" ]; then rm -rf "$VARDIR"/* fi exit $? fi # -D ensures that the listed config file base dirs exist if [ "$cmd" = D ]; then config_mkdirs "$@" exit $? fi # -l lists our resolv files, optionally for a specific interface if [ "$cmd" = l -o "$cmd" = i ]; then list_resolv "$cmd" "$args" exit $? fi # Not normally needed, but subscribers should be able to run independently if [ "$cmd" = v -o -n "$VFLAG" ]; then make_vars "$iface" exit $? fi # Test that we have valid options if [ "$cmd" = a -o "$cmd" = d ]; then if [ -z "$iface" ]; then usage "Interface not specified" fi elif [ "$cmd" != u ]; then [ -n "$cmd" -a "$cmd" != h ] && usage "Unknown option $cmd" usage fi if [ "$cmd" = a ]; then for x in '/' \\ ' ' '*'; do case "$iface" in *[$x]*) error_exit "$x not allowed in interface name";; esac done for x in '.' '-' '~'; do case "$iface" in [$x]*) error_exit \ "$x not allowed at start of interface name";; esac done [ "$cmd" = a -a -t 0 ] && error_exit "No file given via stdin" fi if [ ! -d "$VARDIR" ]; then if [ -L "$VARDIR" ]; then dir="$(readlink "$VARDIR")" # link maybe relative cd "${VARDIR%/*}" if ! mkdir -m 0755 -p "$dir"; then error_exit "Failed to create needed" \ "directory $dir" fi else if ! mkdir -m 0755 -p "$VARDIR"; then error_exit "Failed to create needed" \ "directory $VARDIR" fi fi fi if [ ! -d "$IFACEDIR" ]; then mkdir -m 0755 -p "$IFACEDIR" || \ error_exit "Failed to create needed directory $IFACEDIR" if [ "$cmd" = d ]; then # Provide the same error messages as below if ! ${force}; then cd "$IFACEDIR" for i in $args; do warn "No resolv.conf for interface $i" done fi ${force} exit $? fi fi # An interface was added, changed, deleted or a general update was called. # Due to exclusivity we need to ensure that this is an atomic operation. # Our subscribers *may* need this as well if the init system is sub par. # As such we spinlock at this point as best we can. # We don't use flock(1) because it's not widely available and normally resides # in /usr which we do our very best to operate without. [ -w "$VARDIR" ] || error_exit "Cannot write to $LOCKDIR" : ${lock_timeout:=10} while true; do if mkdir "$LOCKDIR" 2>/dev/null; then trap 'rm -rf "$LOCKDIR";' EXIT trap 'rm -rf "$LOCKDIR"; exit 1' INT QUIT ABRT SEGV ALRM TERM echo $$ >"$LOCKDIR/pid" break fi pid=$(cat "$LOCKDIR/pid") if ! kill -0 "$pid"; then warn "clearing stale lock pid $pid" rm -rf "$LOCKDIR" continue fi lock_timeout=$(($lock_timeout - 1)) if [ "$lock_timeout" -le 0 ]; then error_exit "timed out waiting for lock from pid $pid" fi sleep 1 done case "$cmd" in a) # Read resolv.conf from stdin resolv="$(cat)" changed=false changedfile=false # If what we are given matches what we have, then do nothing if [ -e "$IFACEDIR/$iface" ]; then if [ "$(echo "$resolv")" != \ "$(cat "$IFACEDIR/$iface")" ] then changed=true changedfile=true fi else changed=true changedfile=true fi # Set metric and private before creating the interface resolv.conf file # to ensure that it will have the correct flags [ ! -d "$METRICDIR" ] && mkdir "$METRICDIR" oldmetric="$METRICDIR/"*" $iface" newmetric= if [ -n "$IF_METRIC" ]; then # Pad metric to 6 characters, so 5 is less than 10 while [ ${#IF_METRIC} -le 6 ]; do IF_METRIC="0$IF_METRIC" done newmetric="$METRICDIR/$IF_METRIC $iface" fi rm -f "$METRICDIR/"*" $iface" [ "$oldmetric" != "$newmetric" -a \ "$oldmetric" != "$METRICDIR/* $iface" ] && changed=true [ -n "$newmetric" ] && echo " " >"$newmetric" case "$IF_PRIVATE" in [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) if [ ! -d "$PRIVATEDIR" ]; then [ -e "$PRIVATEDIR" ] && rm "$PRIVATEDIR" mkdir "$PRIVATEDIR" fi [ -e "$PRIVATEDIR/$iface" ] || changed=true [ -d "$PRIVATEDIR" ] && echo " " >"$PRIVATEDIR/$iface" ;; *) if [ -e "$PRIVATEDIR/$iface" ]; then rm -f "$PRIVATEDIR/$iface" changed=true fi ;; esac oldexcl= for x in "$EXCLUSIVEDIR/"*" $iface"; do if [ -f "$x" ]; then oldexcl="$x" break fi done case "$IF_EXCLUSIVE" in [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) if [ ! -d "$EXCLUSIVEDIR" ]; then [ -e "$EXCLUSIVEDIR" ] && rm "$EXCLUSIVEDIR" mkdir "$EXCLUSIVEDIR" fi cd "$EXCLUSIVEDIR" for x in *; do [ -f "$x" ] && break done if [ "${x#* }" != "$iface" ]; then if [ "$x" = "${x% *}" ]; then x=10000000 else x="${x% *}" fi if [ "$x" = "0000000" ]; then warn "exclusive underflow" else x=$(($x - 1)) fi if [ -d "$EXCLUSIVEDIR" ]; then echo " " >"$EXCLUSIVEDIR/$x $iface" fi changed=true fi ;; *) if [ -f "$oldexcl" ]; then rm -f "$oldexcl" changed=true fi ;; esac if $changedfile; then printf "%s\n" "$resolv" >"$IFACEDIR/$iface" || exit $? elif ! $changed; then exit 0 fi unset changed changedfile oldmetric newmetric x oldexcl ;; d) # Delete any existing information about the interface cd "$IFACEDIR" changed=false for i in $args; do if [ -e "$i" ]; then changed=true elif ! ${force}; then warn "No resolv.conf for interface $i" fi rm -f "$i" "$METRICDIR/"*" $i" \ "$PRIVATEDIR/$i" \ "$EXCLUSIVEDIR/"*" $i" || exit $? done if ! ${changed}; then # Set the return code based on the forced flag ${force} exit $? fi unset changed i ;; esac case "${resolvconf:-YES}" in [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) ;; *) exit 0;; esac eval "$(make_vars)" export RESOLVCONF DOMAINS SEARCH NAMESERVERS LOCALNAMESERVERS : ${list_resolv:=list_resolv -l} retval=0 for script in "$LIBEXECDIR"/*; do if [ -f "$script" ]; then eval script_enabled="\$${script##*/}" case "${script_enabled:-YES}" in [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) ;; *) continue;; esac if [ -x "$script" ]; then "$script" "$cmd" "$iface" else (set -- "$cmd" "$iface"; . "$script") fi retval=$(($retval + $?)) fi done exit $retval Index: vendor/openresolv/dist/unbound.in =================================================================== --- vendor/openresolv/dist/unbound.in (revision 295108) +++ vendor/openresolv/dist/unbound.in (revision 295109) @@ -1,85 +1,86 @@ #!/bin/sh # Copyright (c) 2009-2014 Roy Marples # All rights reserved # unbound subscriber for resolvconf # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above # copyright notice, this list of conditions and the following # disclaimer in the documentation and/or other materials provided # with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. unbound_insecure= [ -f "@SYSCONFDIR@"/resolvconf.conf ] || exit 0 . "@SYSCONFDIR@/resolvconf.conf" || exit 1 [ -z "$unbound_conf" ] && exit 0 [ -z "$RESOLVCONF" ] && eval "$(@SBINDIR@/resolvconf -v)" NL=" " : ${unbound_pid:=/var/run/unbound.pid} : ${unbound_service:=unbound} : ${unbound_restart:=@RESTARTCMD ${unbound_service}@} newconf="# Generated by resolvconf$NL" for d in $DOMAINS; do dn="${d%%:*}" ns="${d#*:}" case "$unbound_insecure" in [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1) - newconf="$newconf${NL}domain-insecure: \"$dn\"" + newconf="$newconf${NL}server:$NL" + newconf="$newconf domain-insecure: \"$dn\"$NL" ;; esac newconf="$newconf${NL}forward-zone:$NL name: \"$dn\"$NL" while [ -n "$ns" ]; do newconf="$newconf forward-addr: ${ns%%,*}$NL" [ "$ns" = "${ns#*,}" ] && break ns="${ns#*,}" done done if [ -n "$NAMESERVERS" ]; then newconf="$newconf${NL}forward-zone:$NL name: \".\"$NL" for n in $NAMESERVERS; do newconf="$newconf forward-addr: $n$NL" done fi # Try to ensure that config dirs exist if type config_mkdirs >/dev/null 2>&1; then config_mkdirs "$unbound_conf" else @SBINDIR@/resolvconf -D "$unbound_conf" fi if [ ! -f "$unbound_conf" ] || \ [ "$(cat "$unbound_conf")" != "$(printf %s "$newconf")" ] then printf %s "$newconf" >"$unbound_conf" # If we can't sent a HUP then force a restart if [ -s "$unbound_pid" ]; then if ! kill -HUP $(cat "$unbound_pid") 2>/dev/null; then eval $unbound_restart fi else eval $unbound_restart fi fi