Index: projects/clang380-import/libexec/rtld-elf/powerpc64/reloc.c =================================================================== --- projects/clang380-import/libexec/rtld-elf/powerpc64/reloc.c (revision 293035) +++ projects/clang380-import/libexec/rtld-elf/powerpc64/reloc.c (revision 293036) @@ -1,555 +1,556 @@ /* $NetBSD: ppc_reloc.c,v 1.10 2001/09/10 06:09:41 mycroft Exp $ */ /*- * Copyright (C) 1998 Tsubai Masanari * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #include #include #include #include #include #include #include #include #include #include "debug.h" #include "rtld.h" #if !defined(_CALL_ELF) || _CALL_ELF == 1 struct funcdesc { Elf_Addr addr; Elf_Addr toc; Elf_Addr env; }; #endif /* * Process the R_PPC_COPY relocations */ int do_copy_relocations(Obj_Entry *dstobj) { const Elf_Rela *relalim; const Elf_Rela *rela; /* * COPY relocs are invalid outside of the main program */ assert(dstobj->mainprog); relalim = (const Elf_Rela *) ((caddr_t) dstobj->rela + dstobj->relasize); for (rela = dstobj->rela; rela < relalim; rela++) { void *dstaddr; const Elf_Sym *dstsym; const char *name; size_t size; const void *srcaddr; const Elf_Sym *srcsym = NULL; const Obj_Entry *srcobj, *defobj; SymLook req; int res; if (ELF_R_TYPE(rela->r_info) != R_PPC_COPY) { continue; } dstaddr = (void *) (dstobj->relocbase + rela->r_offset); dstsym = dstobj->symtab + ELF_R_SYM(rela->r_info); name = dstobj->strtab + dstsym->st_name; size = dstsym->st_size; symlook_init(&req, name); req.ventry = fetch_ventry(dstobj, ELF_R_SYM(rela->r_info)); req.flags = SYMLOOK_EARLY; for (srcobj = dstobj->next; srcobj != NULL; srcobj = srcobj->next) { res = symlook_obj(&req, srcobj); if (res == 0) { srcsym = req.sym_out; defobj = req.defobj_out; break; } } if (srcobj == NULL) { _rtld_error("Undefined symbol \"%s\" " " referenced from COPY" " relocation in %s", name, dstobj->path); return (-1); } srcaddr = (const void *) (defobj->relocbase+srcsym->st_value); memcpy(dstaddr, srcaddr, size); dbg("copy_reloc: src=%p,dst=%p,size=%zd\n",srcaddr,dstaddr,size); } return (0); } /* * Perform early relocation of the run-time linker image */ void reloc_non_plt_self(Elf_Dyn *dynp, Elf_Addr relocbase) { const Elf_Rela *rela = 0, *relalim; Elf_Addr relasz = 0; Elf_Addr *where; /* * Extract the rela/relasz values from the dynamic section */ for (; dynp->d_tag != DT_NULL; dynp++) { switch (dynp->d_tag) { case DT_RELA: rela = (const Elf_Rela *)(relocbase+dynp->d_un.d_ptr); break; case DT_RELASZ: relasz = dynp->d_un.d_val; break; } } /* * Relocate these values */ relalim = (const Elf_Rela *)((caddr_t)rela + relasz); for (; rela < relalim; rela++) { where = (Elf_Addr *)(relocbase + rela->r_offset); *where = (Elf_Addr)(relocbase + rela->r_addend); } } /* * Relocate a non-PLT object with addend. */ static int reloc_nonplt_object(Obj_Entry *obj_rtld, Obj_Entry *obj, const Elf_Rela *rela, SymCache *cache, int flags, RtldLockState *lockstate) { Elf_Addr *where = (Elf_Addr *)(obj->relocbase + rela->r_offset); const Elf_Sym *def; const Obj_Entry *defobj; Elf_Addr tmp; switch (ELF_R_TYPE(rela->r_info)) { case R_PPC_NONE: break; case R_PPC64_UADDR64: /* doubleword64 S + A */ case R_PPC64_ADDR64: case R_PPC_GLOB_DAT: def = find_symdef(ELF_R_SYM(rela->r_info), obj, &defobj, flags, cache, lockstate); if (def == NULL) { return (-1); } tmp = (Elf_Addr)(defobj->relocbase + def->st_value + rela->r_addend); /* Don't issue write if unnecessary; avoid COW page fault */ if (*where != tmp) { *where = tmp; } break; case R_PPC_RELATIVE: /* doubleword64 B + A */ tmp = (Elf_Addr)(obj->relocbase + rela->r_addend); /* As above, don't issue write unnecessarily */ if (*where != tmp) { *where = tmp; } break; case R_PPC_COPY: /* * These are deferred until all other relocations * have been done. All we do here is make sure * that the COPY relocation is not in a shared * library. They are allowed only in executable * files. */ if (!obj->mainprog) { _rtld_error("%s: Unexpected R_COPY " " relocation in shared library", obj->path); return (-1); } break; case R_PPC_JMP_SLOT: /* * These will be handled by the plt/jmpslot routines */ break; case R_PPC64_DTPMOD64: def = find_symdef(ELF_R_SYM(rela->r_info), obj, &defobj, flags, cache, lockstate); if (def == NULL) return (-1); *where = (Elf_Addr) defobj->tlsindex; break; case R_PPC64_TPREL64: def = find_symdef(ELF_R_SYM(rela->r_info), obj, &defobj, flags, cache, lockstate); if (def == NULL) return (-1); /* * We lazily allocate offsets for static TLS as we * see the first relocation that references the * TLS block. This allows us to support (small * amounts of) static TLS in dynamically loaded * modules. If we run out of space, we generate an * error. */ if (!defobj->tls_done) { if (!allocate_tls_offset((Obj_Entry*) defobj)) { _rtld_error("%s: No space available for static " "Thread Local Storage", obj->path); return (-1); } } *(Elf_Addr **)where = *where * sizeof(Elf_Addr) + (Elf_Addr *)(def->st_value + rela->r_addend + defobj->tlsoffset - TLS_TP_OFFSET); break; case R_PPC64_DTPREL64: def = find_symdef(ELF_R_SYM(rela->r_info), obj, &defobj, flags, cache, lockstate); if (def == NULL) return (-1); *where += (Elf_Addr)(def->st_value + rela->r_addend - TLS_DTV_OFFSET); break; default: _rtld_error("%s: Unsupported relocation type %ld" " in non-PLT relocations\n", obj->path, ELF_R_TYPE(rela->r_info)); return (-1); } return (0); } /* * Process non-PLT relocations */ int reloc_non_plt(Obj_Entry *obj, Obj_Entry *obj_rtld, int flags, RtldLockState *lockstate) { const Elf_Rela *relalim; const Elf_Rela *rela; SymCache *cache; int bytes = obj->dynsymcount * sizeof(SymCache); int r = -1; if ((flags & SYMLOOK_IFUNC) != 0) /* XXX not implemented */ return (0); /* * The dynamic loader may be called from a thread, we have * limited amounts of stack available so we cannot use alloca(). */ if (obj != obj_rtld) { cache = mmap(NULL, bytes, PROT_READ|PROT_WRITE, MAP_ANON, -1, 0); if (cache == MAP_FAILED) cache = NULL; } else cache = NULL; /* * From the SVR4 PPC ABI: * "The PowerPC family uses only the Elf32_Rela relocation * entries with explicit addends." */ relalim = (const Elf_Rela *)((caddr_t)obj->rela + obj->relasize); for (rela = obj->rela; rela < relalim; rela++) { if (reloc_nonplt_object(obj_rtld, obj, rela, cache, flags, lockstate) < 0) goto done; } r = 0; done: if (cache) munmap(cache, bytes); /* Synchronize icache for text seg in case we made any changes */ __syncicache(obj->mapbase, obj->textsize); return (r); } /* * Initialise a PLT slot to the resolving trampoline */ static int reloc_plt_object(Obj_Entry *obj, const Elf_Rela *rela) { Elf_Addr *where = (Elf_Addr *)(obj->relocbase + rela->r_offset); -#if !defined(_CALL_ELF) || _CALL_ELF == 1 - Elf_Addr *glink; -#endif long reloff; reloff = rela - obj->pltrela; -#if !defined(_CALL_ELF) || _CALL_ELF == 1 - if (obj->priv == NULL) - obj->priv = xmalloc(obj->pltrelasize); - glink = obj->priv + reloff*sizeof(Elf_Addr)*2; + dbg(" reloc_plt_object: where=%p,reloff=%lx,glink=%#lx", (void *)where, + reloff, obj->glink); - dbg(" reloc_plt_object: where=%p,reloff=%lx,glink=%p", (void *)where, reloff, glink); - - memcpy(where, _rtld_bind_start, sizeof(struct funcdesc)); - ((struct funcdesc *)(where))->env = (Elf_Addr)glink; - *(glink++) = (Elf_Addr)obj; - *(glink++) = reloff*sizeof(Elf_Rela); +#if !defined(_CALL_ELF) || _CALL_ELF == 1 + /* Glink code is 3 instructions after the first 32k, 2 before */ + *where = (Elf_Addr)obj->glink + 32 + + 8*((reloff < 0x8000) ? reloff : 0x8000) + + 12*((reloff < 0x8000) ? 0 : (reloff - 0x8000)); #else - dbg(" reloc_plt_object: where=%p,reloff=%lx,glink=%#lx", (void *)where, reloff, obj->glink); *where = (Elf_Addr)obj->glink + 4*reloff + 32; #endif return (0); } /* * Process the PLT relocations. */ int reloc_plt(Obj_Entry *obj) { const Elf_Rela *relalim; const Elf_Rela *rela; if (obj->pltrelasize != 0) { relalim = (const Elf_Rela *)((char *)obj->pltrela + obj->pltrelasize); for (rela = obj->pltrela; rela < relalim; rela++) { assert(ELF_R_TYPE(rela->r_info) == R_PPC_JMP_SLOT); if (reloc_plt_object(obj, rela) < 0) { return (-1); } } } return (0); } /* * LD_BIND_NOW was set - force relocation for all jump slots */ int reloc_jmpslots(Obj_Entry *obj, int flags, RtldLockState *lockstate) { const Obj_Entry *defobj; const Elf_Rela *relalim; const Elf_Rela *rela; const Elf_Sym *def; Elf_Addr *where; Elf_Addr target; relalim = (const Elf_Rela *)((char *)obj->pltrela + obj->pltrelasize); for (rela = obj->pltrela; rela < relalim; rela++) { assert(ELF_R_TYPE(rela->r_info) == R_PPC_JMP_SLOT); where = (Elf_Addr *)(obj->relocbase + rela->r_offset); def = find_symdef(ELF_R_SYM(rela->r_info), obj, &defobj, SYMLOOK_IN_PLT | flags, NULL, lockstate); if (def == NULL) { dbg("reloc_jmpslots: sym not found"); return (-1); } target = (Elf_Addr)(defobj->relocbase + def->st_value); -#if 0 - /* PG XXX */ - dbg("\"%s\" in \"%s\" --> %p in \"%s\"", - defobj->strtab + def->st_name, basename(obj->path), - (void *)target, basename(defobj->path)); -#endif - if (def == &sym_zero) { /* Zero undefined weak symbols */ #if !defined(_CALL_ELF) || _CALL_ELF == 1 bzero(where, sizeof(struct funcdesc)); #else *where = 0; #endif } else { reloc_jmpslot(where, target, defobj, obj, (const Elf_Rel *) rela); } } obj->jmpslots_done = true; return (0); } /* * Update the value of a PLT jump slot. */ Elf_Addr reloc_jmpslot(Elf_Addr *wherep, Elf_Addr target, const Obj_Entry *defobj, const Obj_Entry *obj, const Elf_Rel *rel) { /* * At the PLT entry pointed at by `wherep', construct * a direct transfer to the now fully resolved function * address. */ #if !defined(_CALL_ELF) || _CALL_ELF == 1 dbg(" reloc_jmpslot: where=%p, target=%p (%#lx + %#lx)", (void *)wherep, (void *)target, *(Elf_Addr *)target, (Elf_Addr)defobj->relocbase); + /* + * For the trampoline, the second two elements of the function + * descriptor are unused, so we are fine replacing those at any time + * with the real ones with no thread safety implications. However, we + * need to make sure the main entry point pointer ([0]) is seen to be + * modified *after* the second two elements. This can't be done in + * general, since there are no barriers in the reading code, but put in + * some isyncs to at least make it a little better. + */ memcpy(wherep, (void *)target, sizeof(struct funcdesc)); + wherep[2] = ((Elf_Addr *)target)[2]; + wherep[1] = ((Elf_Addr *)target)[1]; + __asm __volatile ("isync" : : : "memory"); + wherep[0] = ((Elf_Addr *)target)[0]; + __asm __volatile ("isync" : : : "memory"); + if (((struct funcdesc *)(wherep))->addr < (Elf_Addr)defobj->relocbase) { /* - * XXX: It is possible (e.g. LD_BIND_NOW) that the function + * It is possible (LD_BIND_NOW) that the function * descriptor we are copying has not yet been relocated. - * If this happens, fix it. + * If this happens, fix it. Don't worry about threading in + * this case since LD_BIND_NOW makes it irrelevant. */ ((struct funcdesc *)(wherep))->addr += (Elf_Addr)defobj->relocbase; ((struct funcdesc *)(wherep))->toc += (Elf_Addr)defobj->relocbase; } #else dbg(" reloc_jmpslot: where=%p, target=%p", (void *)wherep, (void *)target); *wherep = target; #endif - __asm __volatile("sync" ::: "memory"); - return (target); } int reloc_iresolve(Obj_Entry *obj, struct Struct_RtldLockState *lockstate) { /* XXX not implemented */ return (0); } int reloc_gnu_ifunc(Obj_Entry *obj, int flags, struct Struct_RtldLockState *lockstate) { /* XXX not implemented */ return (0); } void init_pltgot(Obj_Entry *obj) { -#if defined(_CALL_ELF) && _CALL_ELF == 2 Elf_Addr *pltcall; pltcall = obj->pltgot; if (pltcall == NULL) { return; } +#if defined(_CALL_ELF) && _CALL_ELF == 2 pltcall[0] = (Elf_Addr)&_rtld_bind_start; pltcall[1] = (Elf_Addr)obj; - - __asm __volatile("sync" ::: "memory"); +#else + memcpy(pltcall, _rtld_bind_start, sizeof(struct funcdesc)); + pltcall[2] = (Elf_Addr)obj; #endif } void allocate_initial_tls(Obj_Entry *list) { Elf_Addr **tp; /* * Fix the size of the static TLS block by using the maximum * offset allocated so far and adding a bit for dynamic modules to * use. */ tls_static_space = tls_last_offset + tls_last_size + RTLD_STATIC_TLS_EXTRA; tp = (Elf_Addr **) ((char *)allocate_tls(list, NULL, TLS_TCB_SIZE, 16) + TLS_TP_OFFSET + TLS_TCB_SIZE); __asm __volatile("mr 13,%0" :: "r"(tp)); } void* __tls_get_addr(tls_index* ti) { Elf_Addr **tp; char *p; __asm __volatile("mr %0,13" : "=r"(tp)); p = tls_get_addr_common((Elf_Addr**)((Elf_Addr)tp - TLS_TP_OFFSET - TLS_TCB_SIZE), ti->ti_module, ti->ti_offset); return (p + TLS_DTV_OFFSET); } Index: projects/clang380-import/libexec/rtld-elf/powerpc64/rtld_start.S =================================================================== --- projects/clang380-import/libexec/rtld-elf/powerpc64/rtld_start.S (revision 293035) +++ projects/clang380-import/libexec/rtld-elf/powerpc64/rtld_start.S (revision 293036) @@ -1,178 +1,171 @@ /* $NetBSD: rtld_start.S,v 1.4 2001/09/26 04:06:43 mycroft Exp $ */ /*- * Copyright (C) 1998 Tsubai Masanari * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #include .extern _GLOBAL_OFFSET_TABLE_ .extern _DYNAMIC _ENTRY(_rtld_start) stdu %r1,-144(%r1) /* 16-byte aligned stack for reg saves + exit_proc & obj _rtld args + backchain & lrsave stack frame */ std %r3,96(%r1) /* argc */ std %r4,104(%r1) /* argv */ std %r5,112(%r1) /* envp */ /* std %r6,120(%r1) *//* obj (always 0) */ /* std %r7,128(%r1) *//* cleanup (always 0) */ std %r8,136(%r1) /* ps_strings */ /* * Perform initial relocation of ld-elf.so. Not as easy as it * sounds. * - perform small forward branch to put PC into link reg * - use link-time constants to determine offset to the * _DYNAMIC section and the GOT. Add these to the PC to * convert to absolute addresses. * - call reloc_non_plt_self() to fix up ld-elf.so's relocations */ bl 1f .llong _DYNAMIC-. 1: mflr %r3 /* PC value at .llong */ ld %r4,0(%r3) /* offset to _DYNAMIC */ add %r3,%r4,%r3 /* r3 = &_DYNAMIC, absolute value */ ld %r4,-0x8000(%r2) /* First TOC entry is TOC base */ subf %r4,%r4,%r2 /* Subtract from real TOC base to get base */ bl reloc_non_plt_self /* reloc_non_plt_self(&_DYNAMIC,base) */ nop /* * The _rtld() function likes to see a stack layout containing * { argc, argv[0], argv[1] ... argv[N], 0, env[0], ... , env[N] } * Since the PowerPC stack was 16-byte aligned at exec time, the * original stack layout has to be found by moving back a word * from the argv pointer. */ ld %r4,104(%r1) addi %r3,%r4,-8 /* locate argc ptr, &argv[-1] */ addi %r4,%r1,128 /* &exit_proc on stack */ addi %r5,%r1,120 /* &obj_main on stack */ bl _rtld /* &_start = _rtld(sp, &exit_proc, &obj_main)*/ nop #if !defined(_CALL_ELF) || _CALL_ELF == 1 ld %r2,8(%r3) ld %r11,16(%r3) ld %r3,0(%r3) #else mr %r12,%r3 #endif mtlr %r3 /* * Restore args, with new obj/exit proc */ ld %r3,96(%r1) /* argc */ ld %r4,104(%r1) /* argv */ ld %r5,112(%r1) /* envp */ ld %r6,120(%r1) /* obj */ ld %r7,128(%r1) /* exit proc */ ld %r8,136(%r1) /* ps_strings */ blrl /* _start(argc, argv, envp, obj, cleanup, ps_strings) */ li %r0,1 /* _exit() */ sc /* * _rtld_bind_start() * * Call into the MI binder. This routine is reached via the PLT call cell * - * For ELFv1, on entry, %r11 contains a pointer to the (object, relocation) - * tuple. + * On entry, %r11 contains an object pointer and %r0 contains the PLT index. * - * For ELFv2, %r11 contains an object pointer and %r0 contains the PLT index. - * * Save all registers, call into the binder to resolve and fixup the external * routine, and then transfer to the external routine on return. */ .globl _rtld_bind _ENTRY(_rtld_bind_start) - mr %r12,%r0 # shunt r0 immediately to r12 for ELFv2 + mr %r12,%r0 # save r0 (index) immediately to r12 mflr %r0 std %r0,16(%r1) # save lr mfcr %r0 std %r0,8(%r1) # save cr stdu %r1,-48-12*8(%r1) # stack space for 8 regs + header # + 2 save regs std %r3,64+0*8(%r1) # save r3-r10 (arguments) std %r4,64+1*8(%r1) std %r5,64+2*8(%r1) std %r6,64+3*8(%r1) std %r7,64+4*8(%r1) std %r8,64+5*8(%r1) std %r9,64+6*8(%r1) std %r10,64+7*8(%r1) -#if !defined(_CALL_ELF) || _CALL_ELF == 1 - ld %r3,0(%r11) - ld %r4,8(%r11) -#else mr %r3,%r11 - mulli %r4,%r12,24 /* Multiply index by sizeof(Elf_Rela) */ -#endif + mulli %r4,%r12,24 # Multiply index by sizeof(Elf_Rela) + bl _rtld_bind # target addr = _rtld_bind(obj, reloff) nop #if !defined(_CALL_ELF) || _CALL_ELF == 1 ld %r2,8(%r3) ld %r11,16(%r3) ld %r3,0(%r3) #else mr %r12,%r3 #endif mtctr %r3 # move absolute target addr into ctr ld %r3,64+0*8(%r1) # restore r3-r10 ld %r4,64+1*8(%r1) ld %r5,64+2*8(%r1) ld %r6,64+3*8(%r1) ld %r7,64+4*8(%r1) ld %r8,64+5*8(%r1) ld %r9,64+6*8(%r1) ld %r10,64+7*8(%r1) ld %r1,0(%r1) # restore stack ld %r0,8(%r1) # restore cr mtcr %r0 ld %r0,16(%r1) # restore lr mtlr %r0 bctr # jump to target .section .note.GNU-stack,"",%progbits Index: projects/clang380-import/share/man/man4/splash.4 =================================================================== --- projects/clang380-import/share/man/man4/splash.4 (revision 293035) +++ projects/clang380-import/share/man/man4/splash.4 (revision 293036) @@ -1,292 +1,302 @@ .\" .\" Copyright (c) 1999 .\" Kazutaka YOKOTA .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer as .\" the first lines of this file unmodified. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD$ .\" -.Dd November 29, 2010 +.Dd December 31, 2015 .Dt SPLASH 4 .Os .Sh NAME .Nm splash .Nd splash screen / screen saver interface .Sh SYNOPSIS .Cd "device splash" .Sh DESCRIPTION The .Nm pseudo device driver adds support for the splash screen and screen savers to the kernel. This driver is required if the splash bitmap image is to be loaded or any screen saver is to be used. .Ss Splash screen You can load and display an arbitrary bitmap image file as a welcome banner on the screen when the system is about to start. This image will remain on the screen during kernel initialization process until the login prompt appears on the screen or until a screen saver is loaded and initialized. The image will also disappear if you hit any key, although this may not work immediately if the kernel is still probing devices. .Pp If you specify the .Fl c or .Fl v boot option when loading the kernel, the splash image will not appear. However, it is still loaded and can be used as a screen saver later: see below. .Pp In order to display the bitmap, the bitmap file itself and the matching splash image decoder module must be loaded by the boot loader. Currently the following decoder modules are available: .Pp .Bl -tag -width splash_decoder -compact .It Pa splash_bmp.ko Windows BMP file decoder. While the BMP file format allows images of various color depths, this decoder currently only handles 256 color bitmaps. Bitmaps of other color depths will not be displayed. .It Pa splash_pcx.ko ZSoft PCX decoder. This decoder currently only supports version 5 8-bpp single-plane images. .It Pa splash_txt.ko TheDraw binary ASCII drawing file decoder. Displays a text-mode 80x25 ASCII drawing, such as that produced by the Binary save format in TheDraw. This format consists of a sequence of two byte pairs representing the 80x25 display, where the first byte is the ASCII character to draw and the second byte indicates the colors/attributes to use when drawing the character. .El .Pp The .Sx EXAMPLES section illustrates how to set up the splash screen. .Pp If the standard VGA video mode is used, the size of the bitmap must be 320x200 or less. If you enable the VESA mode support in the kernel, either by statically linking the VESA module or by loading the VESA module (see .Xr vga 4 ) , you can load bitmaps up to a resolution of 1024x768, depending on the VESA BIOS and the amount of video memory on the video card. .Ss Screen saver The screen saver will activate when the system is considered idle: i.e.\& when the user has not typed a key or moved the mouse for a specified period of time. As the screen saver is an optional module, it must be explicitly loaded into memory. Currently the following screen saver modules are available: .Pp .Bl -tag -width splash_module.ko -compact .It Pa blank_saver.ko This screen saver simply blanks the screen. .It Pa beastie_saver.ko Animated graphical .Bx Daemon. .It Pa daemon_saver.ko Animated .Bx Daemon screen saver. .It Pa dragon_saver.ko Draws a random dragon curve. .It Pa fade_saver.ko The screen will gradually fade away. .It Pa fire_saver.ko A fire which becomes higher as load increases. .It Pa green_saver.ko The screen will be blanked, similar to .Pa blank_saver.ko . If the monitor and the video card's BIOS support it the screen will also be powered off. .It Pa logo_saver.ko Animated graphical .Fx logo. +.It Pa plasma_saver.ko +Draws an animated interference pattern. .It Pa rain_saver.ko Draws a shower on the screen. .It Pa snake_saver.ko Draws a snake of string. .It Pa star_saver.ko Twinkling stars. .It Pa warp_saver.ko Streaking stars. .El .Pp Screen saver modules can be loaded using .Xr kldload 8 : .Pp .Dl kldload logo_saver .Pp The timeout value in seconds can be specified as follows: .Pp .Dl vidcontrol -t N .Pp Alternatively, you can set the .Ar saver variable in the .Pa /etc/rc.conf to the screen saver of your choice and the timeout value to the .Ar blanktime variable so that the screen saver is automatically loaded and the timeout value is set when the system starts. .Pp The screen saver may be instantly activated by hitting the .Ar saver key: the defaults are .Em Shift-Pause on the AT enhanced keyboard and .Em Shift-Ctrl-NumLock/Pause on the AT 84 keyboard. You can change the .Ar saver key by modifying the keymap (see .Xr kbdcontrol 1 , .Xr keymap 5 ) , and assign the .Ar saver function to a key of your preference. .Pp The screen saver will not run if the screen is not in text mode. .Ss Splash screen as a screen saver If you load a splash image but do not load a screen saver, you can continue using the splash module as a screen saver. The screen blanking interval can be specified as described in the .Sx Screen saver section above. .\".Sh DRIVER CONFIGURATION .Sh FILES .Bl -tag -width /boot/kernel/splash_xxxx.ko -compact .It Pa /boot/defaults/loader.conf boot loader configuration defaults .It Pa /etc/rc.conf system configuration information .It Pa /boot/kernel/splash_*.ko splash image decoder modules .It Pa /boot/kernel/*_saver.ko screen saver modules .It Pa /boot/kernel/vesa.ko the VESA support module .El .Sh EXAMPLES In order to load the splash screen or the screen saver, you must have the following line in the kernel configuration file. .Pp .Dl device splash .Pp Next, edit .Pa /boot/loader.conf (see .Xr loader.conf 5 ) and include the following lines: .Bd -literal -offset indent splash_bmp_load="YES" bitmap_load="YES" bitmap_name="/boot/chuck.bmp" .Ed .Pp In the above example, the file .Pa /boot/chuck.bmp is loaded. In the following example, the VESA module is loaded so that a bitmap file which cannot be displayed in standard VGA modes may be shown using one of the VESA video modes. .Bd -literal -offset indent splash_pcx_load="YES" vesa_load="YES" bitmap_load="YES" bitmap_name="/boot/chuck.pcx" .Ed .Pp If the VESA support is statically linked to the kernel, it is not necessary to load the VESA module. Just load the bitmap file and the splash decoder module as in the first example above. .Pp To load a binary ASCII drawing and display this while booting, include the following into your .Pa /boot/loader.conf : .Bd -literal -offset indent splash_txt_load="YES" bitmap_load="YES" bitmap_name="/boot/splash.bin" .Ed .\".Sh DIAGNOSTICS .Sh SEE ALSO .Xr vidcontrol 1 , .Xr syscons 4 , .Xr vga 4 , .Xr loader.conf 5 , .Xr rc.conf 5 , .Xr kldload 8 , .Xr kldunload 8 .Sh HISTORY The .Nm driver first appeared in .Fx 3.1 . .Sh AUTHORS .An -nosplit The .Nm driver and this manual page were written by .An Kazutaka Yokota Aq Mt yokota@FreeBSD.org . The .Pa splash_bmp module was written by .An Michael Smith Aq Mt msmith@FreeBSD.org and .An Kazutaka Yokota . The .Pa splash_pcx module was written by .An Dag-Erling Sm\(/orgrav Aq Mt des@FreeBSD.org based on the .Pa splash_bmp code. The .Pa splash_txt module was written by .An Antony Mawer Aq Mt antony@mawer.org based on the .Pa splash_bmp code, with some additional inspiration from the .Pa daemon_saver code. +The +.Pa logo_saver , +.Pa plasma_saver , +.Pa rain_saver +and +.Pa warp_saver +modules were written by +.An Dag-Erling Sm\(/orgrav Aq Mt des@FreeBSD.org . .Sh CAVEATS Both the splash screen and the screen saver work with .Xr syscons 4 only. .Sh BUGS If you load a screen saver while another screen saver has already been loaded, the first screen saver will not be automatically unloaded and will remain in memory, wasting kernel memory space. Index: projects/clang380-import/share/man/man4 =================================================================== --- projects/clang380-import/share/man/man4 (revision 293035) +++ projects/clang380-import/share/man/man4 (revision 293036) Property changes on: projects/clang380-import/share/man/man4 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head/share/man/man4:r293016-293035 Index: projects/clang380-import/share =================================================================== --- projects/clang380-import/share (revision 293035) +++ projects/clang380-import/share (revision 293036) Property changes on: projects/clang380-import/share ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head/share:r293016-293035 Index: projects/clang380-import/sys/conf/kmod.mk =================================================================== --- projects/clang380-import/sys/conf/kmod.mk (revision 293035) +++ projects/clang380-import/sys/conf/kmod.mk (revision 293036) @@ -1,453 +1,464 @@ # From: @(#)bsd.prog.mk 5.26 (Berkeley) 6/25/91 # $FreeBSD$ # # The include file handles building and installing loadable # kernel modules. # # # +++ variables +++ # # CLEANFILES Additional files to remove for the clean and cleandir targets. # # EXPORT_SYMS A list of symbols that should be exported from the module, # or the name of a file containing a list of symbols, or YES # to export all symbols. If not defined, no symbols are # exported. # # KMOD The name of the kernel module to build. # # KMODDIR Base path for kernel modules (see kld(4)). [/boot/kernel] # # KMODOWN Module file owner. [${BINOWN}] # # KMODGRP Module file group. [${BINGRP}] # # KMODMODE Module file mode. [${BINMODE}] # # KMODLOAD Command to load a kernel module [/sbin/kldload] # # KMODUNLOAD Command to unload a kernel module [/sbin/kldunload] # +# KMODISLOADED Command to check whether a kernel module is +# loaded [/sbin/kldstat -q -n] +# # PROG The name of the kernel module to build. # If not supplied, ${KMOD}.ko is used. # # SRCS List of source files. # # FIRMWS List of firmware images in format filename:shortname:version # # FIRMWARE_LICENSE # Set to the name of the license the user has to agree on in # order to use this firmware. See /usr/share/doc/legal # # DESTDIR The tree where the module gets installed. [not set] # # +++ targets +++ # # install: # install the kernel module; if the Makefile # does not itself define the target install, the targets # beforeinstall and afterinstall may also be used to cause # actions immediately before and after the install target # is executed. # # load: # Load a module. # # unload: # Unload a module. # +# reload: +# Unload if loaded, then load. +# AWK?= awk KMODLOAD?= /sbin/kldload KMODUNLOAD?= /sbin/kldunload +KMODISLOADED?= /sbin/kldstat -q -n OBJCOPY?= objcopy .include # Grab all the options for a kernel build. For backwards compat, we need to # do this after bsd.own.mk. .include "kern.opts.mk" .include .include "config.mk" .SUFFIXES: .out .o .c .cc .cxx .C .y .l .s .S .m # amd64 and mips use direct linking for kmod, all others use shared binaries .if ${MACHINE_CPUARCH} != amd64 && ${MACHINE_CPUARCH} != mips __KLD_SHARED=yes .else __KLD_SHARED=no .endif .if !empty(CFLAGS:M-O[23s]) && empty(CFLAGS:M-fno-strict-aliasing) CFLAGS+= -fno-strict-aliasing .endif WERROR?= -Werror CFLAGS+= ${WERROR} CFLAGS+= -D_KERNEL CFLAGS+= -DKLD_MODULE # Don't use any standard or source-relative include directories. NOSTDINC= -nostdinc CFLAGS:= ${CFLAGS:N-I*} ${NOSTDINC} ${INCLMAGIC} ${CFLAGS:M-I*} .if defined(KERNBUILDDIR) CFLAGS+= -DHAVE_KERNEL_OPTION_HEADERS -include ${KERNBUILDDIR}/opt_global.h .endif # Add -I paths for system headers. Individual module makefiles don't # need any -I paths for this. Similar defaults for .PATH can't be # set because there are no standard paths for non-headers. CFLAGS+= -I. -I${SYSDIR} CFLAGS.gcc+= -finline-limit=${INLINE_LIMIT} CFLAGS.gcc+= -fms-extensions CFLAGS.gcc+= --param inline-unit-growth=100 CFLAGS.gcc+= --param large-function-growth=1000 # Disallow common variables, and if we end up with commons from # somewhere unexpected, allocate storage for them in the module itself. CFLAGS+= -fno-common LDFLAGS+= -d -warn-common CFLAGS+= ${DEBUG_FLAGS} .if ${MACHINE_CPUARCH} == amd64 CFLAGS+= -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer .endif .if ${MACHINE_CPUARCH} == "aarch64" CFLAGS+= -fPIC .endif # Temporary workaround for PR 196407, which contains the fascinating details. # Don't allow clang to use fpu instructions or registers in kernel modules. .if ${MACHINE_CPUARCH} == arm CFLAGS.clang+= -mllvm -arm-use-movt=0 CFLAGS.clang+= -mfpu=none CFLAGS+= -funwind-tables .endif .if ${MACHINE_CPUARCH} == powerpc CFLAGS+= -mlongcall -fno-omit-frame-pointer .endif .if ${MACHINE_CPUARCH} == mips CFLAGS+= -G0 -fno-pic -mno-abicalls -mlong-calls .endif .if defined(DEBUG) || defined(DEBUG_FLAGS) CTFFLAGS+= -g .endif .if defined(FIRMWS) ${KMOD:S/$/.c/}: ${SYSDIR}/tools/fw_stub.awk ${AWK} -f ${SYSDIR}/tools/fw_stub.awk ${FIRMWS} -m${KMOD} -c${KMOD:S/$/.c/g} \ ${FIRMWARE_LICENSE:C/.+/-l/}${FIRMWARE_LICENSE} SRCS+= ${KMOD:S/$/.c/} CLEANFILES+= ${KMOD:S/$/.c/} .for _firmw in ${FIRMWS} ${_firmw:C/\:.*$/.fwo/}: ${_firmw:C/\:.*$//} @${ECHO} ${_firmw:C/\:.*$//} ${.ALLSRC:M*${_firmw:C/\:.*$//}} @if [ -e ${_firmw:C/\:.*$//} ]; then \ ${LD} -b binary --no-warn-mismatch ${_LDFLAGS} \ -r -d -o ${.TARGET} ${_firmw:C/\:.*$//}; \ else \ ln -s ${.ALLSRC:M*${_firmw:C/\:.*$//}} ${_firmw:C/\:.*$//}; \ ${LD} -b binary --no-warn-mismatch ${_LDFLAGS} \ -r -d -o ${.TARGET} ${_firmw:C/\:.*$//}; \ rm ${_firmw:C/\:.*$//}; \ fi OBJS+= ${_firmw:C/\:.*$/.fwo/} .endfor .endif # Conditionally include SRCS based on kernel config options. .for _o in ${KERN_OPTS} SRCS+=${SRCS.${_o}} .endfor OBJS+= ${SRCS:N*.h:R:S/$/.o/g} .if !defined(PROG) PROG= ${KMOD}.ko .endif .if !defined(DEBUG_FLAGS) FULLPROG= ${PROG} .else FULLPROG= ${PROG}.full ${PROG}: ${FULLPROG} ${PROG}.debug ${OBJCOPY} --strip-debug --add-gnu-debuglink=${PROG}.debug \ ${FULLPROG} ${.TARGET} ${PROG}.debug: ${FULLPROG} ${OBJCOPY} --only-keep-debug ${FULLPROG} ${.TARGET} .endif .if ${__KLD_SHARED} == yes ${FULLPROG}: ${KMOD}.kld .if ${MACHINE_CPUARCH} != "aarch64" ${LD} -Bshareable ${_LDFLAGS} -o ${.TARGET} ${KMOD}.kld .else #XXXKIB Relocatable linking in aarch64 ld from binutils 2.25.1 does # not work. The linker corrupts the references to the external # symbols which are defined by other object in the linking set # and should therefore loose the GOT entry. The problem seems # to be fixed in the binutils-gdb git HEAD as of 2015-10-04. Hack # below allows to get partially functioning modules for now. ${LD} -Bshareable ${_LDFLAGS} -o ${.TARGET} ${OBJS} .endif .if !defined(DEBUG_FLAGS) ${OBJCOPY} --strip-debug ${.TARGET} .endif .endif EXPORT_SYMS?= NO .if ${EXPORT_SYMS} != YES CLEANFILES+= export_syms .endif .if ${__KLD_SHARED} == yes ${KMOD}.kld: ${OBJS} .else ${FULLPROG}: ${OBJS} .endif ${LD} ${_LDFLAGS} -r -d -o ${.TARGET} ${OBJS} .if ${MK_CTF} != "no" ${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ${OBJS} .endif .if defined(EXPORT_SYMS) .if ${EXPORT_SYMS} != YES .if ${EXPORT_SYMS} == NO :> export_syms .elif !exists(${.CURDIR}/${EXPORT_SYMS}) echo ${EXPORT_SYMS} > export_syms .else grep -v '^#' < ${EXPORT_SYMS} > export_syms .endif ${AWK} -f ${SYSDIR}/conf/kmod_syms.awk ${.TARGET} \ export_syms | xargs -J% ${OBJCOPY} % ${.TARGET} .endif .endif .if !defined(DEBUG_FLAGS) && ${__KLD_SHARED} == no ${OBJCOPY} --strip-debug ${.TARGET} .endif _ILINKS=machine .if ${MACHINE} != ${MACHINE_CPUARCH} && ${MACHINE} != "arm64" _ILINKS+=${MACHINE_CPUARCH} .endif .if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64" _ILINKS+=x86 .endif CLEANFILES+=${_ILINKS} all: objwarn ${PROG} beforedepend: ${_ILINKS} # Ensure that the links exist without depending on it when it exists which # causes all the modules to be rebuilt when the directory pointed to changes. .for _link in ${_ILINKS} .if !exists(${.OBJDIR}/${_link}) ${OBJS}: ${_link} .endif .endfor # Search for kernel source tree in standard places. .for _dir in ${.CURDIR}/../.. ${.CURDIR}/../../.. /sys /usr/src/sys .if !defined(SYSDIR) && exists(${_dir}/kern/) SYSDIR= ${_dir} .endif .endfor .if !defined(SYSDIR) || !exists(${SYSDIR}/kern/) .error "can't find kernel source tree" .endif .NOPATH: ${_ILINKS} ${_ILINKS}: @case ${.TARGET} in \ machine) \ path=${SYSDIR}/${MACHINE}/include ;; \ *) \ path=${SYSDIR}/${.TARGET:T}/include ;; \ esac ; \ path=`(cd $$path && /bin/pwd)` ; \ ${ECHO} ${.TARGET:T} "->" $$path ; \ ln -sf $$path ${.TARGET:T} CLEANFILES+= ${PROG} ${KMOD}.kld ${OBJS} .if defined(DEBUG_FLAGS) CLEANFILES+= ${FULLPROG} ${PROG}.debug .endif .if !target(install) _INSTALLFLAGS:= ${INSTALLFLAGS} .for ie in ${INSTALLFLAGS_EDIT} _INSTALLFLAGS:= ${_INSTALLFLAGS${ie}} .endfor .if !target(realinstall) KERN_DEBUGDIR?= ${DEBUGDIR} realinstall: _kmodinstall .ORDER: beforeinstall _kmodinstall _kmodinstall: ${INSTALL} -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \ ${_INSTALLFLAGS} ${PROG} ${DESTDIR}${KMODDIR}/ .if defined(DEBUG_FLAGS) && !defined(INSTALL_NODEBUG) && ${MK_KERNEL_SYMBOLS} != "no" ${INSTALL} -o ${KMODOWN} -g ${KMODGRP} -m ${KMODMODE} \ ${_INSTALLFLAGS} ${PROG}.debug ${DESTDIR}${KERN_DEBUGDIR}${KMODDIR}/ .endif .include .if !defined(NO_XREF) afterinstall: _kldxref .ORDER: realinstall _kldxref .ORDER: _installlinks _kldxref _kldxref: @if type kldxref >/dev/null 2>&1; then \ ${ECHO} kldxref ${DESTDIR}${KMODDIR}; \ kldxref ${DESTDIR}${KMODDIR}; \ fi .endif .endif # !target(realinstall) .endif # !target(install) .if !target(load) load: ${PROG} ${KMODLOAD} -v ${.OBJDIR}/${PROG} .endif .if !target(unload) unload: - ${KMODUNLOAD} -v ${PROG} + if ${KMODISLOADED} ${PROG} ; then ${KMODUNLOAD} -v ${PROG} ; fi +.endif + +.if !target(reload) +reload: unload load .endif .if defined(KERNBUILDDIR) .PATH: ${KERNBUILDDIR} CFLAGS+= -I${KERNBUILDDIR} .for _src in ${SRCS:Mopt_*.h} CLEANFILES+= ${_src} .if !target(${_src}) ${_src}: ln -sf ${KERNBUILDDIR}/${_src} ${.TARGET} .endif .endfor .else .for _src in ${SRCS:Mopt_*.h} CLEANFILES+= ${_src} .if !target(${_src}) ${_src}: :> ${.TARGET} .endif .endfor .endif # Respect configuration-specific C flags. CFLAGS+= ${CONF_CFLAGS} .if !empty(SRCS:Mvnode_if.c) CLEANFILES+= vnode_if.c vnode_if.c: ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src ${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -c .endif .if !empty(SRCS:Mvnode_if.h) CLEANFILES+= vnode_if.h vnode_if_newproto.h vnode_if_typedef.h vnode_if.h vnode_if_newproto.h vnode_if_typedef.h: ${SYSDIR}/tools/vnode_if.awk \ ${SYSDIR}/kern/vnode_if.src vnode_if.h: vnode_if_newproto.h vnode_if_typedef.h ${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -h vnode_if_newproto.h: ${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -p vnode_if_typedef.h: ${AWK} -f ${SYSDIR}/tools/vnode_if.awk ${SYSDIR}/kern/vnode_if.src -q .endif # Build _if.[ch] from _if.m, and clean them when we're done. # This is duplicated in sys/modules/Makefile. .if !defined(__MPATH) __MPATH!=find ${SYSDIR:tA}/ -name \*_if.m .export __MPATH .endif _MFILES=${__MPATH:T:O} _MPATH=${__MPATH:H:O:u} .PATH.m: ${_MPATH} .for _i in ${SRCS:M*_if.[ch]} _MATCH=M${_i:R:S/$/.m/} _MATCHES=${_MFILES:${_MATCH}} .if !empty(_MATCHES) CLEANFILES+= ${_i} .endif .endfor # _i .m.c: ${SYSDIR}/tools/makeobjops.awk ${AWK} -f ${SYSDIR}/tools/makeobjops.awk ${.IMPSRC} -c .m.h: ${SYSDIR}/tools/makeobjops.awk ${AWK} -f ${SYSDIR}/tools/makeobjops.awk ${.IMPSRC} -h .for _i in mii pccard .if !empty(SRCS:M${_i}devs.h) CLEANFILES+= ${_i}devs.h ${_i}devs.h: ${SYSDIR}/tools/${_i}devs2h.awk ${SYSDIR}/dev/${_i}/${_i}devs ${AWK} -f ${SYSDIR}/tools/${_i}devs2h.awk ${SYSDIR}/dev/${_i}/${_i}devs .endif .endfor # _i .if !empty(SRCS:Musbdevs.h) CLEANFILES+= usbdevs.h usbdevs.h: ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs ${AWK} -f ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs -h .endif .if !empty(SRCS:Musbdevs_data.h) CLEANFILES+= usbdevs_data.h usbdevs_data.h: ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs ${AWK} -f ${SYSDIR}/tools/usbdevs2h.awk ${SYSDIR}/dev/usb/usbdevs -d .endif .if !empty(SRCS:Macpi_quirks.h) CLEANFILES+= acpi_quirks.h acpi_quirks.h: ${SYSDIR}/tools/acpi_quirks2h.awk ${SYSDIR}/dev/acpica/acpi_quirks ${AWK} -f ${SYSDIR}/tools/acpi_quirks2h.awk ${SYSDIR}/dev/acpica/acpi_quirks .endif .if !empty(SRCS:Massym.s) CLEANFILES+= assym.s genassym.o assym.s: genassym.o .if defined(KERNBUILDDIR) genassym.o: opt_global.h .endif assym.s: ${SYSDIR}/kern/genassym.sh sh ${SYSDIR}/kern/genassym.sh genassym.o > ${.TARGET} genassym.o: ${SYSDIR}/${MACHINE}/${MACHINE}/genassym.c genassym.o: ${SRCS:Mopt_*.h} ${CC} -c ${CFLAGS:N-fno-common} \ ${SYSDIR}/${MACHINE}/${MACHINE}/genassym.c .endif lint: ${SRCS} ${LINT} ${LINTKERNFLAGS} ${CFLAGS:M-[DILU]*} ${.ALLSRC:M*.c} .if defined(KERNBUILDDIR) ${OBJS}: opt_global.h .endif .include cleandepend: cleanilinks # .depend needs include links so we remove them only together. cleanilinks: rm -f ${_ILINKS} .if !exists(${.OBJDIR}/${DEPENDFILE}) ${OBJS}: ${SRCS:M*.h} .endif .include .include "kern.mk" Index: projects/clang380-import/sys/conf =================================================================== --- projects/clang380-import/sys/conf (revision 293035) +++ projects/clang380-import/sys/conf (revision 293036) Property changes on: projects/clang380-import/sys/conf ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head/sys/conf:r293016-293035 Index: projects/clang380-import/sys/dev/syscons/plasma/fp16.c =================================================================== --- projects/clang380-import/sys/dev/syscons/plasma/fp16.c (nonexistent) +++ projects/clang380-import/sys/dev/syscons/plasma/fp16.c (revision 293036) @@ -0,0 +1,131 @@ +/*- + * Copyright (c) 2015 Dag-Erling Smørgrav + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#ifdef _KERNEL +#include +#else +#include +#include +#endif + +#include "fp16.h" + +/* + * Compute the quare root of x, using Newton's method with 2^(log2(x)/2) + * as the initial estimate. + */ +fp16_t +fp16_sqrt(fp16_t x) +{ + fp16_t y, delta; + signed int log2x; + + /* special case */ + if (x == 0) + return (0); + + /* shift toward 0 by half the logarithm */ + log2x = flsl(x) - 1; + if (log2x >= 16) { + y = x >> (log2x - 16) / 2; + } else { +#if 0 + y = x << (16 - log2x) / 2; +#else + /* XXX for now, return 0 for anything < 1 */ + return (0); +#endif + } + while (y > 0) { + /* delta = y^2 / 2y */ + delta = fp16_div(fp16_sub(fp16_mul(y, y), x), y * 2); + if (delta == 0) + break; + y = fp16_sub(y, delta); + } + return (y); +} + +static fp16_t fp16_cos_table[256] = { + 65536, 65534, 65531, 65524, 65516, 65505, 65491, 65475, + 65457, 65436, 65412, 65386, 65358, 65327, 65294, 65258, + 65220, 65179, 65136, 65091, 65043, 64992, 64939, 64884, + 64826, 64766, 64703, 64638, 64571, 64501, 64428, 64353, + 64276, 64197, 64115, 64030, 63943, 63854, 63762, 63668, + 63571, 63473, 63371, 63268, 63162, 63053, 62942, 62829, + 62714, 62596, 62475, 62353, 62228, 62100, 61971, 61839, + 61705, 61568, 61429, 61288, 61144, 60998, 60850, 60700, + 60547, 60392, 60235, 60075, 59913, 59749, 59583, 59414, + 59243, 59070, 58895, 58718, 58538, 58356, 58172, 57986, + 57797, 57606, 57414, 57219, 57022, 56822, 56621, 56417, + 56212, 56004, 55794, 55582, 55368, 55152, 54933, 54713, + 54491, 54266, 54040, 53811, 53581, 53348, 53114, 52877, + 52639, 52398, 52155, 51911, 51665, 51416, 51166, 50914, + 50660, 50403, 50146, 49886, 49624, 49360, 49095, 48828, + 48558, 48288, 48015, 47740, 47464, 47186, 46906, 46624, + 46340, 46055, 45768, 45480, 45189, 44897, 44603, 44308, + 44011, 43712, 43412, 43110, 42806, 42501, 42194, 41885, + 41575, 41263, 40950, 40636, 40319, 40002, 39682, 39362, + 39039, 38716, 38390, 38064, 37736, 37406, 37075, 36743, + 36409, 36074, 35738, 35400, 35061, 34721, 34379, 34036, + 33692, 33346, 32999, 32651, 32302, 31952, 31600, 31247, + 30893, 30538, 30181, 29824, 29465, 29105, 28745, 28383, + 28020, 27656, 27291, 26925, 26557, 26189, 25820, 25450, + 25079, 24707, 24334, 23960, 23586, 23210, 22833, 22456, + 22078, 21699, 21319, 20938, 20557, 20175, 19792, 19408, + 19024, 18638, 18253, 17866, 17479, 17091, 16702, 16313, + 15923, 15533, 15142, 14751, 14359, 13966, 13573, 13179, + 12785, 12390, 11995, 11600, 11204, 10807, 10410, 10013, + 9616, 9218, 8819, 8421, 8022, 7623, 7223, 6823, + 6423, 6023, 5622, 5222, 4821, 4420, 4018, 3617, + 3215, 2814, 2412, 2010, 1608, 1206, 804, 402, +}; + +/* + * Compute the cosine of theta. + */ +fp16_t +fp16_cos(fp16_t theta) +{ + unsigned int i; + + i = 1024 * (theta % FP16_2PI) / FP16_2PI; + switch (i / 256) { + case 0: + return (fp16_cos_table[i % 256]); + case 1: + return (-fp16_cos_table[255 - i % 256]); + case 2: + return (-fp16_cos_table[i % 256]); + case 3: + return (fp16_cos_table[255 - i % 256]); + default: + /* inconceivable! */ + return (0); + } +} Property changes on: projects/clang380-import/sys/dev/syscons/plasma/fp16.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/clang380-import/sys/dev/syscons/plasma/fp16.h =================================================================== --- projects/clang380-import/sys/dev/syscons/plasma/fp16.h (nonexistent) +++ projects/clang380-import/sys/dev/syscons/plasma/fp16.h (revision 293036) @@ -0,0 +1,84 @@ +/*- + * Copyright (c) 2015 Dag-Erling Smørgrav + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +#ifndef FP16_H_INCLUDED +#define FP16_H_INCLUDED + +typedef signed long long fp16_t; + +#define ItoFP16(n) ((signed long long)(n) << 16) +#define FP16toI(n) ((signed long long)(n) >> 16) + +#ifndef _KERNEL +#define FP16toF(n) ((n) / 65536.0) +#endif + +/* add a and b */ +static inline fp16_t +fp16_add(fp16_t a, fp16_t b) +{ + + return (a + b); +} + +/* subtract b from a */ +static inline fp16_t +fp16_sub(fp16_t a, fp16_t b) +{ + + return (a - b); +} + +/* multiply a by b */ +static inline fp16_t +fp16_mul(fp16_t a, fp16_t b) +{ + + return (a * b >> 16); +} + +/* divide a by b */ +static inline fp16_t +fp16_div(fp16_t a, fp16_t b) +{ + + return ((a << 16) / b); +} + +/* square root */ +fp16_t fp16_sqrt(fp16_t); + +#define FP16_2PI 411774 +#define FP16_PI 205887 +#define FP16_PI_2 102943 +#define FP16_PI_4 51471 + +/* cosine */ +fp16_t fp16_cos(fp16_t); + +#endif Property changes on: projects/clang380-import/sys/dev/syscons/plasma/fp16.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/clang380-import/sys/dev/syscons/plasma/plasma_saver.c =================================================================== --- projects/clang380-import/sys/dev/syscons/plasma/plasma_saver.c (nonexistent) +++ projects/clang380-import/sys/dev/syscons/plasma/plasma_saver.c (revision 293036) @@ -0,0 +1,239 @@ +/*- + * Copyright (c) 2015 Dag-Erling Smørgrav + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + * + * To CJA, in appreciation of Nighthawk brunches past and future. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define SAVER_NAME "plasma_saver" + +#include "fp16.h" + +/* + * Preferred video modes + */ +static int modes[] = { + M_VGA_CG640, + M_PC98_PEGC640x480, + M_PC98_PEGC640x400, + M_VGA_CG320, + -1 +}; + +/* + * Display parameters + */ +static unsigned char *vid; +static unsigned int banksize, scrmode, scrw, scrh; +static unsigned int blanked; + +/* + * List of foci + */ +#define FOCI 3 +static struct { + int x, y; /* coordinates */ + int vx, vy; /* velocity */ +} plasma_foci[FOCI]; + +/* + * Palette + */ +static struct { + unsigned char r, g, b; +} plasma_pal[256]; + +/* + * Draw a new frame + */ +static void +plasma_update(video_adapter_t *adp) +{ + unsigned int x, y; /* coordinates */ + signed int dx, dy; /* horizontal / vertical distance */ + fp16_t sqd, d; /* square of distance and distance */ + fp16_t m; /* magnitude */ + unsigned int org, off; /* origin and offset */ + unsigned int i; /* loop index */ + + /* switch to bank 0 */ + vidd_set_win_org(adp, 0); + /* for each scan line */ + for (y = org = off = 0; y < scrh; ++y) { + /* for each pixel on scan line */ + for (x = 0; x < scrw; ++x, ++off) { + /* for each focus */ + for (i = m = 0; i < FOCI; ++i) { + dx = x - plasma_foci[i].x; + dy = y - plasma_foci[i].y; + sqd = ItoFP16(dx * dx + dy * dy); + d = fp16_sqrt(sqd); + /* divide by 4 to stretch out the pattern */ + m = fp16_add(m, fp16_cos(d / 4)); + } + /* + * m is now in the range +/- FOCI, but we need a + * value between 0 and 255. We scale to +/- 127 + * and add 127, which moves it into the range [0, + * 254]. + */ + m = fp16_mul(m, ItoFP16(127)); + m = fp16_div(m, ItoFP16(FOCI)); + m = fp16_add(m, ItoFP16(127)); + /* switch banks if necessary */ + if (off > banksize) { + off -= banksize; + org += banksize; + vidd_set_win_org(adp, org); + } + /* plot */ + vid[off] = FP16toI(m); + } + } + /* now move the foci */ + for (i = 0; i < FOCI; ++i) { + plasma_foci[i].x += plasma_foci[i].vx; + if (plasma_foci[i].x < 0) { + /* bounce against left wall */ + plasma_foci[i].vx = -plasma_foci[i].vx; + plasma_foci[i].x = -plasma_foci[i].x; + } else if (plasma_foci[i].x >= scrw) { + /* bounce against right wall */ + plasma_foci[i].vx = -plasma_foci[i].vx; + plasma_foci[i].x = scrw - (plasma_foci[i].x - scrw); + } + plasma_foci[i].y += plasma_foci[i].vy; + if (plasma_foci[i].y < 0) { + /* bounce against ceiling */ + plasma_foci[i].vy = -plasma_foci[i].vy; + plasma_foci[i].y = -plasma_foci[i].y; + } else if (plasma_foci[i].y >= scrh) { + /* bounce against floor */ + plasma_foci[i].vy = -plasma_foci[i].vy; + plasma_foci[i].y = scrh - (plasma_foci[i].y - scrh); + } + } +} + +/* + * Start or stop the screensaver + */ +static int +plasma_saver(video_adapter_t *adp, int blank) +{ + int pl; + + if (blank) { + /* switch to graphics mode */ + if (blanked <= 0) { + pl = splhigh(); + vidd_set_mode(adp, scrmode); + vidd_load_palette(adp, (unsigned char *)plasma_pal); + vidd_set_border(adp, 0); + blanked++; + vid = (unsigned char *)adp->va_window; + banksize = adp->va_window_size; + splx(pl); + vidd_clear(adp); + } + /* update display */ + plasma_update(adp); + } else { + blanked = 0; + } + return (0); +} + +/* + * Initialize on module load + */ +static int +plasma_init(video_adapter_t *adp) +{ + video_info_t info; + int i; + + /* select video mode */ + for (i = 0; modes[i] >= 0; ++i) + if (vidd_get_info(adp, modes[i], &info) == 0) + break; + if (modes[i] < 0) { + log(LOG_NOTICE, "%s: no supported video modes\n", SAVER_NAME); + return (ENODEV); + } + scrmode = modes[i]; + scrw = info.vi_width; + scrh = info.vi_height; + + /* initialize the palette */ + for (i = 0; i < 256; ++i) + plasma_pal[i].r = plasma_pal[i].g = plasma_pal[i].b = i; + + /* randomize the foci */ + for (i = 0; i < FOCI; i++) { + plasma_foci[i].x = random() % scrw; + plasma_foci[i].y = random() % scrh; + plasma_foci[i].vx = random() % 5 - 2; + plasma_foci[i].vy = random() % 5 - 2; + } + + return (0); +} + +/* + * Clean up before module unload + */ +static int +plasma_term(video_adapter_t *adp) +{ + + return (0); +} + +/* + * Boilerplate + */ +static scrn_saver_t plasma_module = { + SAVER_NAME, + plasma_init, + plasma_term, + plasma_saver, + NULL +}; + +SAVER_MODULE(plasma_saver, plasma_module); Property changes on: projects/clang380-import/sys/dev/syscons/plasma/plasma_saver.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/clang380-import/sys/modules/rtwn/Makefile =================================================================== --- projects/clang380-import/sys/modules/rtwn/Makefile (nonexistent) +++ projects/clang380-import/sys/modules/rtwn/Makefile (revision 293036) @@ -0,0 +1,8 @@ +# $FreeBSD$ + +.PATH: ${.CURDIR}/../../dev/rtwn + +KMOD = if_rtwn +SRCS = if_rtwn.c device_if.h bus_if.h pci_if.h + +.include Property changes on: projects/clang380-import/sys/modules/rtwn/Makefile ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/clang380-import/sys/modules/syscons/Makefile =================================================================== --- projects/clang380-import/sys/modules/syscons/Makefile (revision 293035) +++ projects/clang380-import/sys/modules/syscons/Makefile (revision 293036) @@ -1,34 +1,36 @@ # $FreeBSD$ SUBDIR= ${_apm} \ ${_beastie} \ blank \ ${_daemon} \ ${_dragon} \ fade \ ${_fire} \ green \ ${_logo} \ + ${_plasma} \ ${_rain} \ ${_snake} \ ${_star} \ ${_warp} .if ${MACHINE_CPUARCH} == "i386" _apm= apm .endif .if ${MACHINE_CPUARCH} != "sparc64" _beastie= beastie _beastie= beastie _daemon= daemon _dragon= dragon _fire= fire _logo= logo +_plasma= plasma _rain= rain _snake= snake _star= star _warp= warp .endif .include Index: projects/clang380-import/sys/modules/syscons/plasma/Makefile =================================================================== --- projects/clang380-import/sys/modules/syscons/plasma/Makefile (nonexistent) +++ projects/clang380-import/sys/modules/syscons/plasma/Makefile (revision 293036) @@ -0,0 +1,8 @@ +# $FreeBSD$ + +.PATH: ${.CURDIR}/../../../dev/syscons/plasma + +KMOD= plasma_saver +SRCS= fp16.c plasma_saver.c + +.include Property changes on: projects/clang380-import/sys/modules/syscons/plasma/Makefile ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/clang380-import/sys/net/if_ethersubr.c =================================================================== --- projects/clang380-import/sys/net/if_ethersubr.c (revision 293035) +++ projects/clang380-import/sys/net/if_ethersubr.c (revision 293036) @@ -1,1196 +1,1200 @@ /*- * Copyright (c) 1982, 1989, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)if_ethersubr.c 8.1 (Berkeley) 6/10/93 * $FreeBSD$ */ #include "opt_inet.h" #include "opt_inet6.h" #include "opt_netgraph.h" #include "opt_mbuf_profiling.h" #include "opt_rss.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(INET) || defined(INET6) #include #include #include #include #include #endif #ifdef INET6 #include #endif #include #ifdef CTASSERT CTASSERT(sizeof (struct ether_header) == ETHER_ADDR_LEN * 2 + 2); CTASSERT(sizeof (struct ether_addr) == ETHER_ADDR_LEN); #endif VNET_DEFINE(struct pfil_head, link_pfil_hook); /* Packet filter hooks */ /* netgraph node hooks for ng_ether(4) */ void (*ng_ether_input_p)(struct ifnet *ifp, struct mbuf **mp); void (*ng_ether_input_orphan_p)(struct ifnet *ifp, struct mbuf *m); int (*ng_ether_output_p)(struct ifnet *ifp, struct mbuf **mp); void (*ng_ether_attach_p)(struct ifnet *ifp); void (*ng_ether_detach_p)(struct ifnet *ifp); void (*vlan_input_p)(struct ifnet *, struct mbuf *); /* if_bridge(4) support */ struct mbuf *(*bridge_input_p)(struct ifnet *, struct mbuf *); int (*bridge_output_p)(struct ifnet *, struct mbuf *, struct sockaddr *, struct rtentry *); void (*bridge_dn_p)(struct mbuf *, struct ifnet *); /* if_lagg(4) support */ struct mbuf *(*lagg_input_p)(struct ifnet *, struct mbuf *); static const u_char etherbroadcastaddr[ETHER_ADDR_LEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; static int ether_resolvemulti(struct ifnet *, struct sockaddr **, struct sockaddr *); #ifdef VIMAGE static void ether_reassign(struct ifnet *, struct vnet *, char *); #endif static int ether_requestencap(struct ifnet *, struct if_encap_req *); #define ETHER_IS_BROADCAST(addr) \ (bcmp(etherbroadcastaddr, (addr), ETHER_ADDR_LEN) == 0) #define senderr(e) do { error = (e); goto bad;} while (0) static void update_mbuf_csumflags(struct mbuf *src, struct mbuf *dst) { int csum_flags = 0; if (src->m_pkthdr.csum_flags & CSUM_IP) csum_flags |= (CSUM_IP_CHECKED|CSUM_IP_VALID); if (src->m_pkthdr.csum_flags & CSUM_DELAY_DATA) csum_flags |= (CSUM_DATA_VALID|CSUM_PSEUDO_HDR); if (src->m_pkthdr.csum_flags & CSUM_SCTP) csum_flags |= CSUM_SCTP_VALID; dst->m_pkthdr.csum_flags |= csum_flags; if (csum_flags & CSUM_DATA_VALID) dst->m_pkthdr.csum_data = 0xffff; } /* * Handle link-layer encapsulation requests. */ static int ether_requestencap(struct ifnet *ifp, struct if_encap_req *req) { struct ether_header *eh; struct arphdr *ah; uint16_t etype; const u_char *lladdr; if (req->rtype != IFENCAP_LL) return (EOPNOTSUPP); if (req->bufsize < ETHER_HDR_LEN) return (ENOMEM); eh = (struct ether_header *)req->buf; lladdr = req->lladdr; req->lladdr_off = 0; switch (req->family) { case AF_INET: etype = htons(ETHERTYPE_IP); break; case AF_INET6: etype = htons(ETHERTYPE_IPV6); break; case AF_ARP: ah = (struct arphdr *)req->hdata; ah->ar_hrd = htons(ARPHRD_ETHER); switch(ntohs(ah->ar_op)) { case ARPOP_REVREQUEST: case ARPOP_REVREPLY: etype = htons(ETHERTYPE_REVARP); break; case ARPOP_REQUEST: case ARPOP_REPLY: default: etype = htons(ETHERTYPE_ARP); break; } if (req->flags & IFENCAP_FLAG_BROADCAST) lladdr = ifp->if_broadcastaddr; break; default: return (EAFNOSUPPORT); } memcpy(&eh->ether_type, &etype, sizeof(eh->ether_type)); memcpy(eh->ether_dhost, lladdr, ETHER_ADDR_LEN); memcpy(eh->ether_shost, IF_LLADDR(ifp), ETHER_ADDR_LEN); req->bufsize = sizeof(struct ether_header); return (0); } static int ether_resolve_addr(struct ifnet *ifp, struct mbuf *m, const struct sockaddr *dst, struct route *ro, u_char *phdr, uint32_t *pflags) { struct ether_header *eh; struct rtentry *rt; uint32_t lleflags = 0; int error = 0; #if defined(INET) || defined(INET6) uint16_t etype; #endif eh = (struct ether_header *)phdr; switch (dst->sa_family) { #ifdef INET case AF_INET: if ((m->m_flags & (M_BCAST | M_MCAST)) == 0) error = arpresolve(ifp, 0, m, dst, phdr, &lleflags); else { if (m->m_flags & M_BCAST) memcpy(eh->ether_dhost, ifp->if_broadcastaddr, ETHER_ADDR_LEN); else { const struct in_addr *a; a = &(((const struct sockaddr_in *)dst)->sin_addr); ETHER_MAP_IP_MULTICAST(a, eh->ether_dhost); } etype = htons(ETHERTYPE_IP); memcpy(&eh->ether_type, &etype, sizeof(etype)); memcpy(eh->ether_shost, IF_LLADDR(ifp), ETHER_ADDR_LEN); } break; #endif #ifdef INET6 case AF_INET6: if ((m->m_flags & M_MCAST) == 0) error = nd6_resolve(ifp, 0, m, dst, phdr, &lleflags); else { const struct in6_addr *a6; a6 = &(((const struct sockaddr_in6 *)dst)->sin6_addr); ETHER_MAP_IPV6_MULTICAST(a6, eh->ether_dhost); etype = htons(ETHERTYPE_IPV6); memcpy(&eh->ether_type, &etype, sizeof(etype)); memcpy(eh->ether_shost, IF_LLADDR(ifp), ETHER_ADDR_LEN); } break; #endif default: if_printf(ifp, "can't handle af%d\n", dst->sa_family); if (m != NULL) m_freem(m); return (EAFNOSUPPORT); } if (error == EHOSTDOWN) { rt = (ro != NULL) ? ro->ro_rt : NULL; if (rt != NULL && (rt->rt_flags & RTF_GATEWAY) != 0) error = EHOSTUNREACH; } if (error != 0) return (error); *pflags = RT_MAY_LOOP; if (lleflags & LLE_IFADDR) *pflags |= RT_L2_ME; return (0); } /* * Ethernet output routine. * Encapsulate a packet of type family for the local net. * Use trailer local net encapsulation if enough data in first * packet leaves a multiple of 512 bytes of data in remainder. */ int ether_output(struct ifnet *ifp, struct mbuf *m, const struct sockaddr *dst, struct route *ro) { int error = 0; char linkhdr[ETHER_HDR_LEN], *phdr; struct ether_header *eh; struct pf_mtag *t; int loop_copy = 1; int hlen; /* link layer header length */ uint32_t pflags; phdr = NULL; pflags = 0; if (ro != NULL) { phdr = ro->ro_prepend; hlen = ro->ro_plen; pflags = ro->ro_flags; } #ifdef MAC error = mac_ifnet_check_transmit(ifp, m); if (error) senderr(error); #endif M_PROFILE(m); if (ifp->if_flags & IFF_MONITOR) senderr(ENETDOWN); if (!((ifp->if_flags & IFF_UP) && (ifp->if_drv_flags & IFF_DRV_RUNNING))) senderr(ENETDOWN); if (phdr == NULL) { /* No prepend data supplied. Try to calculate ourselves. */ phdr = linkhdr; hlen = ETHER_HDR_LEN; error = ether_resolve_addr(ifp, m, dst, ro, phdr, &pflags); if (error != 0) return (error == EWOULDBLOCK ? 0 : error); } if ((pflags & RT_L2_ME) != 0) { update_mbuf_csumflags(m, m); return (if_simloop(ifp, m, dst->sa_family, 0)); } loop_copy = pflags & RT_MAY_LOOP; /* * Add local net header. If no space in first mbuf, * allocate another. + * + * Note that we do prepend regardless of RT_HAS_HEADER flag. + * This is done because BPF code shifts m_data pointer + * to the end of ethernet header prior to calling if_output(). */ M_PREPEND(m, hlen, M_NOWAIT); if (m == NULL) senderr(ENOBUFS); if ((pflags & RT_HAS_HEADER) == 0) { eh = mtod(m, struct ether_header *); memcpy(eh, phdr, hlen); } /* * If a simplex interface, and the packet is being sent to our * Ethernet address or a broadcast address, loopback a copy. * XXX To make a simplex device behave exactly like a duplex * device, we should copy in the case of sending to our own * ethernet address (thus letting the original actually appear * on the wire). However, we don't do that here for security * reasons and compatibility with the original behavior. */ if ((m->m_flags & M_BCAST) && loop_copy && (ifp->if_flags & IFF_SIMPLEX) && ((t = pf_find_mtag(m)) == NULL || !t->routed)) { struct mbuf *n; /* * Because if_simloop() modifies the packet, we need a * writable copy through m_dup() instead of a readonly * one as m_copy[m] would give us. The alternative would * be to modify if_simloop() to handle the readonly mbuf, * but performancewise it is mostly equivalent (trading * extra data copying vs. extra locking). * * XXX This is a local workaround. A number of less * often used kernel parts suffer from the same bug. * See PR kern/105943 for a proposed general solution. */ if ((n = m_dup(m, M_NOWAIT)) != NULL) { update_mbuf_csumflags(m, n); (void)if_simloop(ifp, n, dst->sa_family, hlen); } else if_inc_counter(ifp, IFCOUNTER_IQDROPS, 1); } /* * Bridges require special output handling. */ if (ifp->if_bridge) { BRIDGE_OUTPUT(ifp, m, error); return (error); } #if defined(INET) || defined(INET6) if (ifp->if_carp && (error = (*carp_output_p)(ifp, m, dst))) goto bad; #endif /* Handle ng_ether(4) processing, if any */ if (ifp->if_l2com != NULL) { KASSERT(ng_ether_output_p != NULL, ("ng_ether_output_p is NULL")); if ((error = (*ng_ether_output_p)(ifp, &m)) != 0) { bad: if (m != NULL) m_freem(m); return (error); } if (m == NULL) return (0); } /* Continue with link-layer output */ return ether_output_frame(ifp, m); } /* * Ethernet link layer output routine to send a raw frame to the device. * * This assumes that the 14 byte Ethernet header is present and contiguous * in the first mbuf (if BRIDGE'ing). */ int ether_output_frame(struct ifnet *ifp, struct mbuf *m) { int i; if (PFIL_HOOKED(&V_link_pfil_hook)) { i = pfil_run_hooks(&V_link_pfil_hook, &m, ifp, PFIL_OUT, NULL); if (i != 0) return (EACCES); if (m == NULL) return (0); } /* * Queue message on interface, update output statistics if * successful, and start output if interface not yet active. */ return ((ifp->if_transmit)(ifp, m)); } #if defined(INET) || defined(INET6) #endif /* * Process a received Ethernet packet; the packet is in the * mbuf chain m with the ethernet header at the front. */ static void ether_input_internal(struct ifnet *ifp, struct mbuf *m) { struct ether_header *eh; u_short etype; if ((ifp->if_flags & IFF_UP) == 0) { m_freem(m); return; } #ifdef DIAGNOSTIC if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { if_printf(ifp, "discard frame at !IFF_DRV_RUNNING\n"); m_freem(m); return; } #endif if (m->m_len < ETHER_HDR_LEN) { /* XXX maybe should pullup? */ if_printf(ifp, "discard frame w/o leading ethernet " "header (len %u pkt len %u)\n", m->m_len, m->m_pkthdr.len); if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); m_freem(m); return; } eh = mtod(m, struct ether_header *); etype = ntohs(eh->ether_type); random_harvest_queue(m, sizeof(*m), 2, RANDOM_NET_ETHER); CURVNET_SET_QUIET(ifp->if_vnet); if (ETHER_IS_MULTICAST(eh->ether_dhost)) { if (ETHER_IS_BROADCAST(eh->ether_dhost)) m->m_flags |= M_BCAST; else m->m_flags |= M_MCAST; if_inc_counter(ifp, IFCOUNTER_IMCASTS, 1); } #ifdef MAC /* * Tag the mbuf with an appropriate MAC label before any other * consumers can get to it. */ mac_ifnet_create_mbuf(ifp, m); #endif /* * Give bpf a chance at the packet. */ ETHER_BPF_MTAP(ifp, m); /* * If the CRC is still on the packet, trim it off. We do this once * and once only in case we are re-entered. Nothing else on the * Ethernet receive path expects to see the FCS. */ if (m->m_flags & M_HASFCS) { m_adj(m, -ETHER_CRC_LEN); m->m_flags &= ~M_HASFCS; } if (!(ifp->if_capenable & IFCAP_HWSTATS)) if_inc_counter(ifp, IFCOUNTER_IBYTES, m->m_pkthdr.len); /* Allow monitor mode to claim this frame, after stats are updated. */ if (ifp->if_flags & IFF_MONITOR) { m_freem(m); CURVNET_RESTORE(); return; } /* Handle input from a lagg(4) port */ if (ifp->if_type == IFT_IEEE8023ADLAG) { KASSERT(lagg_input_p != NULL, ("%s: if_lagg not loaded!", __func__)); m = (*lagg_input_p)(ifp, m); if (m != NULL) ifp = m->m_pkthdr.rcvif; else { CURVNET_RESTORE(); return; } } /* * If the hardware did not process an 802.1Q tag, do this now, * to allow 802.1P priority frames to be passed to the main input * path correctly. * TODO: Deal with Q-in-Q frames, but not arbitrary nesting levels. */ if ((m->m_flags & M_VLANTAG) == 0 && etype == ETHERTYPE_VLAN) { struct ether_vlan_header *evl; if (m->m_len < sizeof(*evl) && (m = m_pullup(m, sizeof(*evl))) == NULL) { #ifdef DIAGNOSTIC if_printf(ifp, "cannot pullup VLAN header\n"); #endif if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); CURVNET_RESTORE(); return; } evl = mtod(m, struct ether_vlan_header *); m->m_pkthdr.ether_vtag = ntohs(evl->evl_tag); m->m_flags |= M_VLANTAG; bcopy((char *)evl, (char *)evl + ETHER_VLAN_ENCAP_LEN, ETHER_HDR_LEN - ETHER_TYPE_LEN); m_adj(m, ETHER_VLAN_ENCAP_LEN); eh = mtod(m, struct ether_header *); } M_SETFIB(m, ifp->if_fib); /* Allow ng_ether(4) to claim this frame. */ if (ifp->if_l2com != NULL) { KASSERT(ng_ether_input_p != NULL, ("%s: ng_ether_input_p is NULL", __func__)); m->m_flags &= ~M_PROMISC; (*ng_ether_input_p)(ifp, &m); if (m == NULL) { CURVNET_RESTORE(); return; } eh = mtod(m, struct ether_header *); } /* * Allow if_bridge(4) to claim this frame. * The BRIDGE_INPUT() macro will update ifp if the bridge changed it * and the frame should be delivered locally. */ if (ifp->if_bridge != NULL) { m->m_flags &= ~M_PROMISC; BRIDGE_INPUT(ifp, m); if (m == NULL) { CURVNET_RESTORE(); return; } eh = mtod(m, struct ether_header *); } #if defined(INET) || defined(INET6) /* * Clear M_PROMISC on frame so that carp(4) will see it when the * mbuf flows up to Layer 3. * FreeBSD's implementation of carp(4) uses the inprotosw * to dispatch IPPROTO_CARP. carp(4) also allocates its own * Ethernet addresses of the form 00:00:5e:00:01:xx, which * is outside the scope of the M_PROMISC test below. * TODO: Maintain a hash table of ethernet addresses other than * ether_dhost which may be active on this ifp. */ if (ifp->if_carp && (*carp_forus_p)(ifp, eh->ether_dhost)) { m->m_flags &= ~M_PROMISC; } else #endif { /* * If the frame received was not for our MAC address, set the * M_PROMISC flag on the mbuf chain. The frame may need to * be seen by the rest of the Ethernet input path in case of * re-entry (e.g. bridge, vlan, netgraph) but should not be * seen by upper protocol layers. */ if (!ETHER_IS_MULTICAST(eh->ether_dhost) && bcmp(IF_LLADDR(ifp), eh->ether_dhost, ETHER_ADDR_LEN) != 0) m->m_flags |= M_PROMISC; } ether_demux(ifp, m); CURVNET_RESTORE(); } /* * Ethernet input dispatch; by default, direct dispatch here regardless of * global configuration. However, if RSS is enabled, hook up RSS affinity * so that when deferred or hybrid dispatch is enabled, we can redistribute * load based on RSS. * * XXXRW: Would be nice if the ifnet passed up a flag indicating whether or * not it had already done work distribution via multi-queue. Then we could * direct dispatch in the event load balancing was already complete and * handle the case of interfaces with different capabilities better. * * XXXRW: Sort of want an M_DISTRIBUTED flag to avoid multiple distributions * at multiple layers? * * XXXRW: For now, enable all this only if RSS is compiled in, although it * works fine without RSS. Need to characterise the performance overhead * of the detour through the netisr code in the event the result is always * direct dispatch. */ static void ether_nh_input(struct mbuf *m) { M_ASSERTPKTHDR(m); KASSERT(m->m_pkthdr.rcvif != NULL, ("%s: NULL interface pointer", __func__)); ether_input_internal(m->m_pkthdr.rcvif, m); } static struct netisr_handler ether_nh = { .nh_name = "ether", .nh_handler = ether_nh_input, .nh_proto = NETISR_ETHER, #ifdef RSS .nh_policy = NETISR_POLICY_CPU, .nh_dispatch = NETISR_DISPATCH_DIRECT, .nh_m2cpuid = rss_m2cpuid, #else .nh_policy = NETISR_POLICY_SOURCE, .nh_dispatch = NETISR_DISPATCH_DIRECT, #endif }; static void ether_init(__unused void *arg) { netisr_register(ðer_nh); } SYSINIT(ether, SI_SUB_INIT_IF, SI_ORDER_ANY, ether_init, NULL); static void vnet_ether_init(__unused void *arg) { int i; /* Initialize packet filter hooks. */ V_link_pfil_hook.ph_type = PFIL_TYPE_AF; V_link_pfil_hook.ph_af = AF_LINK; if ((i = pfil_head_register(&V_link_pfil_hook)) != 0) printf("%s: WARNING: unable to register pfil link hook, " "error %d\n", __func__, i); } VNET_SYSINIT(vnet_ether_init, SI_SUB_PROTO_IF, SI_ORDER_ANY, vnet_ether_init, NULL); static void vnet_ether_destroy(__unused void *arg) { int i; if ((i = pfil_head_unregister(&V_link_pfil_hook)) != 0) printf("%s: WARNING: unable to unregister pfil link hook, " "error %d\n", __func__, i); } VNET_SYSUNINIT(vnet_ether_uninit, SI_SUB_PROTO_IF, SI_ORDER_ANY, vnet_ether_destroy, NULL); static void ether_input(struct ifnet *ifp, struct mbuf *m) { struct mbuf *mn; /* * The drivers are allowed to pass in a chain of packets linked with * m_nextpkt. We split them up into separate packets here and pass * them up. This allows the drivers to amortize the receive lock. */ while (m) { mn = m->m_nextpkt; m->m_nextpkt = NULL; /* * We will rely on rcvif being set properly in the deferred context, * so assert it is correct here. */ KASSERT(m->m_pkthdr.rcvif == ifp, ("%s: ifnet mismatch", __func__)); netisr_dispatch(NETISR_ETHER, m); m = mn; } } /* * Upper layer processing for a received Ethernet packet. */ void ether_demux(struct ifnet *ifp, struct mbuf *m) { struct ether_header *eh; int i, isr; u_short ether_type; KASSERT(ifp != NULL, ("%s: NULL interface pointer", __func__)); /* Do not grab PROMISC frames in case we are re-entered. */ if (PFIL_HOOKED(&V_link_pfil_hook) && !(m->m_flags & M_PROMISC)) { i = pfil_run_hooks(&V_link_pfil_hook, &m, ifp, PFIL_IN, NULL); if (i != 0 || m == NULL) return; } eh = mtod(m, struct ether_header *); ether_type = ntohs(eh->ether_type); /* * If this frame has a VLAN tag other than 0, call vlan_input() * if its module is loaded. Otherwise, drop. */ if ((m->m_flags & M_VLANTAG) && EVL_VLANOFTAG(m->m_pkthdr.ether_vtag) != 0) { if (ifp->if_vlantrunk == NULL) { if_inc_counter(ifp, IFCOUNTER_NOPROTO, 1); m_freem(m); return; } KASSERT(vlan_input_p != NULL,("%s: VLAN not loaded!", __func__)); /* Clear before possibly re-entering ether_input(). */ m->m_flags &= ~M_PROMISC; (*vlan_input_p)(ifp, m); return; } /* * Pass promiscuously received frames to the upper layer if the user * requested this by setting IFF_PPROMISC. Otherwise, drop them. */ if ((ifp->if_flags & IFF_PPROMISC) == 0 && (m->m_flags & M_PROMISC)) { m_freem(m); return; } /* * Reset layer specific mbuf flags to avoid confusing upper layers. * Strip off Ethernet header. */ m->m_flags &= ~M_VLANTAG; m_clrprotoflags(m); m_adj(m, ETHER_HDR_LEN); /* * Dispatch frame to upper layer. */ switch (ether_type) { #ifdef INET case ETHERTYPE_IP: isr = NETISR_IP; break; case ETHERTYPE_ARP: if (ifp->if_flags & IFF_NOARP) { /* Discard packet if ARP is disabled on interface */ m_freem(m); return; } isr = NETISR_ARP; break; #endif #ifdef INET6 case ETHERTYPE_IPV6: isr = NETISR_IPV6; break; #endif default: goto discard; } netisr_dispatch(isr, m); return; discard: /* * Packet is to be discarded. If netgraph is present, * hand the packet to it for last chance processing; * otherwise dispose of it. */ if (ifp->if_l2com != NULL) { KASSERT(ng_ether_input_orphan_p != NULL, ("ng_ether_input_orphan_p is NULL")); /* * Put back the ethernet header so netgraph has a * consistent view of inbound packets. */ M_PREPEND(m, ETHER_HDR_LEN, M_NOWAIT); (*ng_ether_input_orphan_p)(ifp, m); return; } m_freem(m); } /* * Convert Ethernet address to printable (loggable) representation. * This routine is for compatibility; it's better to just use * * printf("%6D", , ":"); * * since there's no static buffer involved. */ char * ether_sprintf(const u_char *ap) { static char etherbuf[18]; snprintf(etherbuf, sizeof (etherbuf), "%6D", ap, ":"); return (etherbuf); } /* * Perform common duties while attaching to interface list */ void ether_ifattach(struct ifnet *ifp, const u_int8_t *lla) { int i; struct ifaddr *ifa; struct sockaddr_dl *sdl; ifp->if_addrlen = ETHER_ADDR_LEN; ifp->if_hdrlen = ETHER_HDR_LEN; if_attach(ifp); ifp->if_mtu = ETHERMTU; ifp->if_output = ether_output; ifp->if_input = ether_input; ifp->if_resolvemulti = ether_resolvemulti; ifp->if_requestencap = ether_requestencap; #ifdef VIMAGE ifp->if_reassign = ether_reassign; #endif if (ifp->if_baudrate == 0) ifp->if_baudrate = IF_Mbps(10); /* just a default */ ifp->if_broadcastaddr = etherbroadcastaddr; ifa = ifp->if_addr; KASSERT(ifa != NULL, ("%s: no lladdr!\n", __func__)); sdl = (struct sockaddr_dl *)ifa->ifa_addr; sdl->sdl_type = IFT_ETHER; sdl->sdl_alen = ifp->if_addrlen; bcopy(lla, LLADDR(sdl), ifp->if_addrlen); bpfattach(ifp, DLT_EN10MB, ETHER_HDR_LEN); if (ng_ether_attach_p != NULL) (*ng_ether_attach_p)(ifp); /* Announce Ethernet MAC address if non-zero. */ for (i = 0; i < ifp->if_addrlen; i++) if (lla[i] != 0) break; if (i != ifp->if_addrlen) if_printf(ifp, "Ethernet address: %6D\n", lla, ":"); uuid_ether_add(LLADDR(sdl)); } /* * Perform common duties while detaching an Ethernet interface */ void ether_ifdetach(struct ifnet *ifp) { struct sockaddr_dl *sdl; sdl = (struct sockaddr_dl *)(ifp->if_addr->ifa_addr); uuid_ether_del(LLADDR(sdl)); if (ifp->if_l2com != NULL) { KASSERT(ng_ether_detach_p != NULL, ("ng_ether_detach_p is NULL")); (*ng_ether_detach_p)(ifp); } bpfdetach(ifp); if_detach(ifp); } #ifdef VIMAGE void ether_reassign(struct ifnet *ifp, struct vnet *new_vnet, char *unused __unused) { if (ifp->if_l2com != NULL) { KASSERT(ng_ether_detach_p != NULL, ("ng_ether_detach_p is NULL")); (*ng_ether_detach_p)(ifp); } if (ng_ether_attach_p != NULL) { CURVNET_SET_QUIET(new_vnet); (*ng_ether_attach_p)(ifp); CURVNET_RESTORE(); } } #endif SYSCTL_DECL(_net_link); SYSCTL_NODE(_net_link, IFT_ETHER, ether, CTLFLAG_RW, 0, "Ethernet"); #if 0 /* * This is for reference. We have a table-driven version * of the little-endian crc32 generator, which is faster * than the double-loop. */ uint32_t ether_crc32_le(const uint8_t *buf, size_t len) { size_t i; uint32_t crc; int bit; uint8_t data; crc = 0xffffffff; /* initial value */ for (i = 0; i < len; i++) { for (data = *buf++, bit = 0; bit < 8; bit++, data >>= 1) { carry = (crc ^ data) & 1; crc >>= 1; if (carry) crc = (crc ^ ETHER_CRC_POLY_LE); } } return (crc); } #else uint32_t ether_crc32_le(const uint8_t *buf, size_t len) { static const uint32_t crctab[] = { 0x00000000, 0x1db71064, 0x3b6e20c8, 0x26d930ac, 0x76dc4190, 0x6b6b51f4, 0x4db26158, 0x5005713c, 0xedb88320, 0xf00f9344, 0xd6d6a3e8, 0xcb61b38c, 0x9b64c2b0, 0x86d3d2d4, 0xa00ae278, 0xbdbdf21c }; size_t i; uint32_t crc; crc = 0xffffffff; /* initial value */ for (i = 0; i < len; i++) { crc ^= buf[i]; crc = (crc >> 4) ^ crctab[crc & 0xf]; crc = (crc >> 4) ^ crctab[crc & 0xf]; } return (crc); } #endif uint32_t ether_crc32_be(const uint8_t *buf, size_t len) { size_t i; uint32_t crc, carry; int bit; uint8_t data; crc = 0xffffffff; /* initial value */ for (i = 0; i < len; i++) { for (data = *buf++, bit = 0; bit < 8; bit++, data >>= 1) { carry = ((crc & 0x80000000) ? 1 : 0) ^ (data & 0x01); crc <<= 1; if (carry) crc = (crc ^ ETHER_CRC_POLY_BE) | carry; } } return (crc); } int ether_ioctl(struct ifnet *ifp, u_long command, caddr_t data) { struct ifaddr *ifa = (struct ifaddr *) data; struct ifreq *ifr = (struct ifreq *) data; int error = 0; switch (command) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: ifp->if_init(ifp->if_softc); /* before arpwhohas */ arp_ifinit(ifp, ifa); break; #endif default: ifp->if_init(ifp->if_softc); break; } break; case SIOCGIFADDR: { struct sockaddr *sa; sa = (struct sockaddr *) & ifr->ifr_data; bcopy(IF_LLADDR(ifp), (caddr_t) sa->sa_data, ETHER_ADDR_LEN); } break; case SIOCSIFMTU: /* * Set the interface MTU. */ if (ifr->ifr_mtu > ETHERMTU) { error = EINVAL; } else { ifp->if_mtu = ifr->ifr_mtu; } break; default: error = EINVAL; /* XXX netbsd has ENOTTY??? */ break; } return (error); } static int ether_resolvemulti(struct ifnet *ifp, struct sockaddr **llsa, struct sockaddr *sa) { struct sockaddr_dl *sdl; #ifdef INET struct sockaddr_in *sin; #endif #ifdef INET6 struct sockaddr_in6 *sin6; #endif u_char *e_addr; switch(sa->sa_family) { case AF_LINK: /* * No mapping needed. Just check that it's a valid MC address. */ sdl = (struct sockaddr_dl *)sa; e_addr = LLADDR(sdl); if (!ETHER_IS_MULTICAST(e_addr)) return EADDRNOTAVAIL; *llsa = 0; return 0; #ifdef INET case AF_INET: sin = (struct sockaddr_in *)sa; if (!IN_MULTICAST(ntohl(sin->sin_addr.s_addr))) return EADDRNOTAVAIL; sdl = link_init_sdl(ifp, *llsa, IFT_ETHER); sdl->sdl_alen = ETHER_ADDR_LEN; e_addr = LLADDR(sdl); ETHER_MAP_IP_MULTICAST(&sin->sin_addr, e_addr); *llsa = (struct sockaddr *)sdl; return 0; #endif #ifdef INET6 case AF_INET6: sin6 = (struct sockaddr_in6 *)sa; if (IN6_IS_ADDR_UNSPECIFIED(&sin6->sin6_addr)) { /* * An IP6 address of 0 means listen to all * of the Ethernet multicast address used for IP6. * (This is used for multicast routers.) */ ifp->if_flags |= IFF_ALLMULTI; *llsa = 0; return 0; } if (!IN6_IS_ADDR_MULTICAST(&sin6->sin6_addr)) return EADDRNOTAVAIL; sdl = link_init_sdl(ifp, *llsa, IFT_ETHER); sdl->sdl_alen = ETHER_ADDR_LEN; e_addr = LLADDR(sdl); ETHER_MAP_IPV6_MULTICAST(&sin6->sin6_addr, e_addr); *llsa = (struct sockaddr *)sdl; return 0; #endif default: /* * Well, the text isn't quite right, but it's the name * that counts... */ return EAFNOSUPPORT; } } static moduledata_t ether_mod = { .name = "ether", }; void ether_vlan_mtap(struct bpf_if *bp, struct mbuf *m, void *data, u_int dlen) { struct ether_vlan_header vlan; struct mbuf mv, mb; KASSERT((m->m_flags & M_VLANTAG) != 0, ("%s: vlan information not present", __func__)); KASSERT(m->m_len >= sizeof(struct ether_header), ("%s: mbuf not large enough for header", __func__)); bcopy(mtod(m, char *), &vlan, sizeof(struct ether_header)); vlan.evl_proto = vlan.evl_encap_proto; vlan.evl_encap_proto = htons(ETHERTYPE_VLAN); vlan.evl_tag = htons(m->m_pkthdr.ether_vtag); m->m_len -= sizeof(struct ether_header); m->m_data += sizeof(struct ether_header); /* * If a data link has been supplied by the caller, then we will need to * re-create a stack allocated mbuf chain with the following structure: * * (1) mbuf #1 will contain the supplied data link * (2) mbuf #2 will contain the vlan header * (3) mbuf #3 will contain the original mbuf's packet data * * Otherwise, submit the packet and vlan header via bpf_mtap2(). */ if (data != NULL) { mv.m_next = m; mv.m_data = (caddr_t)&vlan; mv.m_len = sizeof(vlan); mb.m_next = &mv; mb.m_data = data; mb.m_len = dlen; bpf_mtap(bp, &mb); } else bpf_mtap2(bp, &vlan, sizeof(vlan), m); m->m_len += sizeof(struct ether_header); m->m_data -= sizeof(struct ether_header); } struct mbuf * ether_vlanencap(struct mbuf *m, uint16_t tag) { struct ether_vlan_header *evl; M_PREPEND(m, ETHER_VLAN_ENCAP_LEN, M_NOWAIT); if (m == NULL) return (NULL); /* M_PREPEND takes care of m_len, m_pkthdr.len for us */ if (m->m_len < sizeof(*evl)) { m = m_pullup(m, sizeof(*evl)); if (m == NULL) return (NULL); } /* * Transform the Ethernet header into an Ethernet header * with 802.1Q encapsulation. */ evl = mtod(m, struct ether_vlan_header *); bcopy((char *)evl + ETHER_VLAN_ENCAP_LEN, (char *)evl, ETHER_HDR_LEN - ETHER_TYPE_LEN); evl->evl_encap_proto = htons(ETHERTYPE_VLAN); evl->evl_tag = htons(tag); return (m); } DECLARE_MODULE(ether, ether_mod, SI_SUB_INIT_IF, SI_ORDER_ANY); MODULE_VERSION(ether, 1); Index: projects/clang380-import/sys/net80211/ieee80211_freebsd.h =================================================================== --- projects/clang380-import/sys/net80211/ieee80211_freebsd.h (revision 293035) +++ projects/clang380-import/sys/net80211/ieee80211_freebsd.h (revision 293036) @@ -1,676 +1,678 @@ /*- * Copyright (c) 2003-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_FREEBSD_H_ #define _NET80211_IEEE80211_FREEBSD_H_ #ifdef _KERNEL #include #include #include #include #include #include #include #include /* * Common state locking definitions. */ typedef struct { char name[16]; /* e.g. "ath0_com_lock" */ struct mtx mtx; } ieee80211_com_lock_t; #define IEEE80211_LOCK_INIT(_ic, _name) do { \ ieee80211_com_lock_t *cl = &(_ic)->ic_comlock; \ snprintf(cl->name, sizeof(cl->name), "%s_com_lock", _name); \ mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF | MTX_RECURSE); \ } while (0) #define IEEE80211_LOCK_OBJ(_ic) (&(_ic)->ic_comlock.mtx) #define IEEE80211_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_LOCK_OBJ(_ic)) #define IEEE80211_LOCK(_ic) mtx_lock(IEEE80211_LOCK_OBJ(_ic)) #define IEEE80211_UNLOCK(_ic) mtx_unlock(IEEE80211_LOCK_OBJ(_ic)) #define IEEE80211_LOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_OWNED) #define IEEE80211_UNLOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_NOTOWNED) /* * Transmit lock. * * This is a (mostly) temporary lock designed to serialise all of the * transmission operations throughout the stack. */ typedef struct { char name[16]; /* e.g. "ath0_com_lock" */ struct mtx mtx; } ieee80211_tx_lock_t; #define IEEE80211_TX_LOCK_INIT(_ic, _name) do { \ ieee80211_tx_lock_t *cl = &(_ic)->ic_txlock; \ snprintf(cl->name, sizeof(cl->name), "%s_tx_lock", _name); \ mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF); \ } while (0) #define IEEE80211_TX_LOCK_OBJ(_ic) (&(_ic)->ic_txlock.mtx) #define IEEE80211_TX_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_TX_LOCK_OBJ(_ic)) #define IEEE80211_TX_LOCK(_ic) mtx_lock(IEEE80211_TX_LOCK_OBJ(_ic)) #define IEEE80211_TX_UNLOCK(_ic) mtx_unlock(IEEE80211_TX_LOCK_OBJ(_ic)) #define IEEE80211_TX_LOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_OWNED) #define IEEE80211_TX_UNLOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_NOTOWNED) /* * Node locking definitions. */ typedef struct { char name[16]; /* e.g. "ath0_node_lock" */ struct mtx mtx; } ieee80211_node_lock_t; #define IEEE80211_NODE_LOCK_INIT(_nt, _name) do { \ ieee80211_node_lock_t *nl = &(_nt)->nt_nodelock; \ snprintf(nl->name, sizeof(nl->name), "%s_node_lock", _name); \ mtx_init(&nl->mtx, nl->name, NULL, MTX_DEF | MTX_RECURSE); \ } while (0) #define IEEE80211_NODE_LOCK_OBJ(_nt) (&(_nt)->nt_nodelock.mtx) #define IEEE80211_NODE_LOCK_DESTROY(_nt) \ mtx_destroy(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_LOCK(_nt) \ mtx_lock(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_IS_LOCKED(_nt) \ mtx_owned(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_UNLOCK(_nt) \ mtx_unlock(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_LOCK_ASSERT(_nt) \ mtx_assert(IEEE80211_NODE_LOCK_OBJ(_nt), MA_OWNED) /* * Node table iteration locking definitions; this protects the * scan generation # used to iterate over the station table * while grabbing+releasing the node lock. */ typedef struct { char name[16]; /* e.g. "ath0_scan_lock" */ struct mtx mtx; } ieee80211_scan_lock_t; #define IEEE80211_NODE_ITERATE_LOCK_INIT(_nt, _name) do { \ ieee80211_scan_lock_t *sl = &(_nt)->nt_scanlock; \ snprintf(sl->name, sizeof(sl->name), "%s_scan_lock", _name); \ mtx_init(&sl->mtx, sl->name, NULL, MTX_DEF); \ } while (0) #define IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt) (&(_nt)->nt_scanlock.mtx) #define IEEE80211_NODE_ITERATE_LOCK_DESTROY(_nt) \ mtx_destroy(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_ITERATE_LOCK(_nt) \ mtx_lock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_ITERATE_UNLOCK(_nt) \ mtx_unlock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) /* * Power-save queue definitions. */ typedef struct mtx ieee80211_psq_lock_t; #define IEEE80211_PSQ_INIT(_psq, _name) \ mtx_init(&(_psq)->psq_lock, _name, "802.11 ps q", MTX_DEF) #define IEEE80211_PSQ_DESTROY(_psq) mtx_destroy(&(_psq)->psq_lock) #define IEEE80211_PSQ_LOCK(_psq) mtx_lock(&(_psq)->psq_lock) #define IEEE80211_PSQ_UNLOCK(_psq) mtx_unlock(&(_psq)->psq_lock) #ifndef IF_PREPEND_LIST #define _IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \ (mtail)->m_nextpkt = (ifq)->ifq_head; \ if ((ifq)->ifq_tail == NULL) \ (ifq)->ifq_tail = (mtail); \ (ifq)->ifq_head = (mhead); \ (ifq)->ifq_len += (mcount); \ } while (0) #define IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \ IF_LOCK(ifq); \ _IF_PREPEND_LIST(ifq, mhead, mtail, mcount); \ IF_UNLOCK(ifq); \ } while (0) #endif /* IF_PREPEND_LIST */ /* * Age queue definitions. */ typedef struct mtx ieee80211_ageq_lock_t; #define IEEE80211_AGEQ_INIT(_aq, _name) \ mtx_init(&(_aq)->aq_lock, _name, "802.11 age q", MTX_DEF) #define IEEE80211_AGEQ_DESTROY(_aq) mtx_destroy(&(_aq)->aq_lock) #define IEEE80211_AGEQ_LOCK(_aq) mtx_lock(&(_aq)->aq_lock) #define IEEE80211_AGEQ_UNLOCK(_aq) mtx_unlock(&(_aq)->aq_lock) /* * 802.1x MAC ACL database locking definitions. */ typedef struct mtx acl_lock_t; #define ACL_LOCK_INIT(_as, _name) \ mtx_init(&(_as)->as_lock, _name, "802.11 ACL", MTX_DEF) #define ACL_LOCK_DESTROY(_as) mtx_destroy(&(_as)->as_lock) #define ACL_LOCK(_as) mtx_lock(&(_as)->as_lock) #define ACL_UNLOCK(_as) mtx_unlock(&(_as)->as_lock) #define ACL_LOCK_ASSERT(_as) \ mtx_assert((&(_as)->as_lock), MA_OWNED) /* * Scan table definitions. */ typedef struct mtx ieee80211_scan_table_lock_t; #define IEEE80211_SCAN_TABLE_LOCK_INIT(_st, _name) \ mtx_init(&(_st)->st_lock, _name, "802.11 scan table", MTX_DEF) #define IEEE80211_SCAN_TABLE_LOCK_DESTROY(_st) mtx_destroy(&(_st)->st_lock) #define IEEE80211_SCAN_TABLE_LOCK(_st) mtx_lock(&(_st)->st_lock) #define IEEE80211_SCAN_TABLE_UNLOCK(_st) mtx_unlock(&(_st)->st_lock) typedef struct mtx ieee80211_scan_iter_lock_t; #define IEEE80211_SCAN_ITER_LOCK_INIT(_st, _name) \ mtx_init(&(_st)->st_scanlock, _name, "802.11 scangen", MTX_DEF) #define IEEE80211_SCAN_ITER_LOCK_DESTROY(_st) mtx_destroy(&(_st)->st_scanlock) #define IEEE80211_SCAN_ITER_LOCK(_st) mtx_lock(&(_st)->st_scanlock) #define IEEE80211_SCAN_ITER_UNLOCK(_st) mtx_unlock(&(_st)->st_scanlock) /* * Mesh node/routing definitions. */ typedef struct mtx ieee80211_rte_lock_t; #define MESH_RT_ENTRY_LOCK_INIT(_rt, _name) \ mtx_init(&(rt)->rt_lock, _name, "802.11s route entry", MTX_DEF) #define MESH_RT_ENTRY_LOCK_DESTROY(_rt) \ mtx_destroy(&(_rt)->rt_lock) #define MESH_RT_ENTRY_LOCK(rt) mtx_lock(&(rt)->rt_lock) #define MESH_RT_ENTRY_LOCK_ASSERT(rt) mtx_assert(&(rt)->rt_lock, MA_OWNED) #define MESH_RT_ENTRY_UNLOCK(rt) mtx_unlock(&(rt)->rt_lock) typedef struct mtx ieee80211_rt_lock_t; #define MESH_RT_LOCK(ms) mtx_lock(&(ms)->ms_rt_lock) #define MESH_RT_LOCK_ASSERT(ms) mtx_assert(&(ms)->ms_rt_lock, MA_OWNED) #define MESH_RT_UNLOCK(ms) mtx_unlock(&(ms)->ms_rt_lock) #define MESH_RT_LOCK_INIT(ms, name) \ mtx_init(&(ms)->ms_rt_lock, name, "802.11s routing table", MTX_DEF) #define MESH_RT_LOCK_DESTROY(ms) \ mtx_destroy(&(ms)->ms_rt_lock) /* * Node reference counting definitions. * * ieee80211_node_initref initialize the reference count to 1 * ieee80211_node_incref add a reference * ieee80211_node_decref remove a reference * ieee80211_node_dectestref remove a reference and return 1 if this * is the last reference, otherwise 0 * ieee80211_node_refcnt reference count for printing (only) */ #include #define ieee80211_node_initref(_ni) \ do { ((_ni)->ni_refcnt = 1); } while (0) #define ieee80211_node_incref(_ni) \ atomic_add_int(&(_ni)->ni_refcnt, 1) #define ieee80211_node_decref(_ni) \ atomic_subtract_int(&(_ni)->ni_refcnt, 1) struct ieee80211_node; int ieee80211_node_dectestref(struct ieee80211_node *ni); #define ieee80211_node_refcnt(_ni) (_ni)->ni_refcnt struct ifqueue; struct ieee80211vap; void ieee80211_drain_ifq(struct ifqueue *); void ieee80211_flush_ifq(struct ifqueue *, struct ieee80211vap *); void ieee80211_vap_destroy(struct ieee80211vap *); #define IFNET_IS_UP_RUNNING(_ifp) \ (((_ifp)->if_flags & IFF_UP) && \ ((_ifp)->if_drv_flags & IFF_DRV_RUNNING)) +/* XXX TODO: cap these at 1, as hz may not be 1000 */ #define msecs_to_ticks(ms) (((ms)*hz)/1000) #define ticks_to_msecs(t) (1000*(t) / hz) #define ticks_to_secs(t) ((t) / hz) + #define time_after(a,b) ((long)(b) - (long)(a) < 0) #define time_before(a,b) time_after(b,a) #define time_after_eq(a,b) ((long)(a) - (long)(b) >= 0) #define time_before_eq(a,b) time_after_eq(b,a) struct mbuf *ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen); /* tx path usage */ #define M_ENCAP M_PROTO1 /* 802.11 encap done */ #define M_EAPOL M_PROTO3 /* PAE/EAPOL frame */ #define M_PWR_SAV M_PROTO4 /* bypass PS handling */ #define M_MORE_DATA M_PROTO5 /* more data frames to follow */ #define M_FF M_PROTO6 /* fast frame */ #define M_TXCB M_PROTO7 /* do tx complete callback */ #define M_AMPDU_MPDU M_PROTO8 /* ok for A-MPDU aggregation */ #define M_FRAG M_PROTO9 /* frame fragmentation */ #define M_FIRSTFRAG M_PROTO10 /* first frame fragment */ #define M_LASTFRAG M_PROTO11 /* last frame fragment */ #define M_80211_TX \ (M_ENCAP|M_EAPOL|M_PWR_SAV|M_MORE_DATA|M_FF|M_TXCB| \ M_AMPDU_MPDU|M_FRAG|M_FIRSTFRAG|M_LASTFRAG) /* rx path usage */ #define M_AMPDU M_PROTO1 /* A-MPDU subframe */ #define M_WEP M_PROTO2 /* WEP done by hardware */ #if 0 #define M_AMPDU_MPDU M_PROTO8 /* A-MPDU re-order done */ #endif #define M_80211_RX (M_AMPDU|M_WEP|M_AMPDU_MPDU) #define IEEE80211_MBUF_TX_FLAG_BITS \ M_FLAG_BITS \ "\15M_ENCAP\17M_EAPOL\20M_PWR_SAV\21M_MORE_DATA\22M_FF\23M_TXCB" \ "\24M_AMPDU_MPDU\25M_FRAG\26M_FIRSTFRAG\27M_LASTFRAG" #define IEEE80211_MBUF_RX_FLAG_BITS \ M_FLAG_BITS \ "\15M_AMPDU\16M_WEP\24M_AMPDU_MPDU" /* * Store WME access control bits in the vlan tag. * This is safe since it's done after the packet is classified * (where we use any previous tag) and because it's passed * directly in to the driver and there's no chance someone * else will clobber them on us. */ #define M_WME_SETAC(m, ac) \ ((m)->m_pkthdr.ether_vtag = (ac)) #define M_WME_GETAC(m) ((m)->m_pkthdr.ether_vtag) /* * Mbufs on the power save queue are tagged with an age and * timed out. We reuse the hardware checksum field in the * mbuf packet header to store this data. */ #define M_AGE_SET(m,v) (m->m_pkthdr.csum_data = v) #define M_AGE_GET(m) (m->m_pkthdr.csum_data) #define M_AGE_SUB(m,adj) (m->m_pkthdr.csum_data -= adj) /* * Store the sequence number. */ #define M_SEQNO_SET(m, seqno) \ ((m)->m_pkthdr.tso_segsz = (seqno)) #define M_SEQNO_GET(m) ((m)->m_pkthdr.tso_segsz) #define MTAG_ABI_NET80211 1132948340 /* net80211 ABI */ struct ieee80211_cb { void (*func)(struct ieee80211_node *, void *, int status); void *arg; }; #define NET80211_TAG_CALLBACK 0 /* xmit complete callback */ int ieee80211_add_callback(struct mbuf *m, void (*func)(struct ieee80211_node *, void *, int), void *arg); void ieee80211_process_callback(struct ieee80211_node *, struct mbuf *, int); #define NET80211_TAG_XMIT_PARAMS 1 /* See below; this is after the bpf_params definition */ #define NET80211_TAG_RECV_PARAMS 2 struct ieee80211com; int ieee80211_parent_xmitpkt(struct ieee80211com *, struct mbuf *); int ieee80211_vap_xmitpkt(struct ieee80211vap *, struct mbuf *); void get_random_bytes(void *, size_t); void ieee80211_sysctl_attach(struct ieee80211com *); void ieee80211_sysctl_detach(struct ieee80211com *); void ieee80211_sysctl_vattach(struct ieee80211vap *); void ieee80211_sysctl_vdetach(struct ieee80211vap *); SYSCTL_DECL(_net_wlan); int ieee80211_sysctl_msecs_ticks(SYSCTL_HANDLER_ARGS); void ieee80211_load_module(const char *); /* * A "policy module" is an adjunct module to net80211 that provides * functionality that typically includes policy decisions. This * modularity enables extensibility and vendor-supplied functionality. */ #define _IEEE80211_POLICY_MODULE(policy, name, version) \ typedef void (*policy##_setup)(int); \ SET_DECLARE(policy##_set, policy##_setup); \ static int \ wlan_##name##_modevent(module_t mod, int type, void *unused) \ { \ policy##_setup * const *iter, f; \ switch (type) { \ case MOD_LOAD: \ SET_FOREACH(iter, policy##_set) { \ f = (void*) *iter; \ f(type); \ } \ return 0; \ case MOD_UNLOAD: \ case MOD_QUIESCE: \ if (nrefs) { \ printf("wlan_" #name ": still in use " \ "(%u dynamic refs)\n", nrefs); \ return EBUSY; \ } \ if (type == MOD_UNLOAD) { \ SET_FOREACH(iter, policy##_set) { \ f = (void*) *iter; \ f(type); \ } \ } \ return 0; \ } \ return EINVAL; \ } \ static moduledata_t name##_mod = { \ "wlan_" #name, \ wlan_##name##_modevent, \ 0 \ }; \ DECLARE_MODULE(wlan_##name, name##_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);\ MODULE_VERSION(wlan_##name, version); \ MODULE_DEPEND(wlan_##name, wlan, 1, 1, 1) /* * Crypto modules implement cipher support. */ #define IEEE80211_CRYPTO_MODULE(name, version) \ _IEEE80211_POLICY_MODULE(crypto, name, version); \ static void \ name##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_crypto_register(&name); \ else \ ieee80211_crypto_unregister(&name); \ } \ TEXT_SET(crypto##_set, name##_modevent) /* * Scanner modules provide scanning policy. */ #define IEEE80211_SCANNER_MODULE(name, version) \ _IEEE80211_POLICY_MODULE(scanner, name, version) #define IEEE80211_SCANNER_ALG(name, alg, v) \ static void \ name##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_scanner_register(alg, &v); \ else \ ieee80211_scanner_unregister(alg, &v); \ } \ TEXT_SET(scanner_set, name##_modevent); \ /* * ACL modules implement acl policy. */ #define IEEE80211_ACL_MODULE(name, alg, version) \ _IEEE80211_POLICY_MODULE(acl, name, version); \ static void \ alg##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_aclator_register(&alg); \ else \ ieee80211_aclator_unregister(&alg); \ } \ TEXT_SET(acl_set, alg##_modevent); \ /* * Authenticator modules handle 802.1x/WPA authentication. */ #define IEEE80211_AUTH_MODULE(name, version) \ _IEEE80211_POLICY_MODULE(auth, name, version) #define IEEE80211_AUTH_ALG(name, alg, v) \ static void \ name##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_authenticator_register(alg, &v); \ else \ ieee80211_authenticator_unregister(alg); \ } \ TEXT_SET(auth_set, name##_modevent) /* * Rate control modules provide tx rate control support. */ #define IEEE80211_RATECTL_MODULE(alg, version) \ _IEEE80211_POLICY_MODULE(ratectl, alg, version); \ #define IEEE80211_RATECTL_ALG(name, alg, v) \ static void \ alg##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_ratectl_register(alg, &v); \ else \ ieee80211_ratectl_unregister(alg); \ } \ TEXT_SET(ratectl##_set, alg##_modevent) struct ieee80211req; typedef int ieee80211_ioctl_getfunc(struct ieee80211vap *, struct ieee80211req *); SET_DECLARE(ieee80211_ioctl_getset, ieee80211_ioctl_getfunc); #define IEEE80211_IOCTL_GET(_name, _get) TEXT_SET(ieee80211_ioctl_getset, _get) typedef int ieee80211_ioctl_setfunc(struct ieee80211vap *, struct ieee80211req *); SET_DECLARE(ieee80211_ioctl_setset, ieee80211_ioctl_setfunc); #define IEEE80211_IOCTL_SET(_name, _set) TEXT_SET(ieee80211_ioctl_setset, _set) #endif /* _KERNEL */ /* XXX this stuff belongs elsewhere */ /* * Message formats for messages from the net80211 layer to user * applications via the routing socket. These messages are appended * to an if_announcemsghdr structure. */ struct ieee80211_join_event { uint8_t iev_addr[6]; }; struct ieee80211_leave_event { uint8_t iev_addr[6]; }; struct ieee80211_replay_event { uint8_t iev_src[6]; /* src MAC */ uint8_t iev_dst[6]; /* dst MAC */ uint8_t iev_cipher; /* cipher type */ uint8_t iev_keyix; /* key id/index */ uint64_t iev_keyrsc; /* RSC from key */ uint64_t iev_rsc; /* RSC from frame */ }; struct ieee80211_michael_event { uint8_t iev_src[6]; /* src MAC */ uint8_t iev_dst[6]; /* dst MAC */ uint8_t iev_cipher; /* cipher type */ uint8_t iev_keyix; /* key id/index */ }; struct ieee80211_wds_event { uint8_t iev_addr[6]; }; struct ieee80211_csa_event { uint32_t iev_flags; /* channel flags */ uint16_t iev_freq; /* setting in Mhz */ uint8_t iev_ieee; /* IEEE channel number */ uint8_t iev_mode; /* CSA mode */ uint8_t iev_count; /* CSA count */ }; struct ieee80211_cac_event { uint32_t iev_flags; /* channel flags */ uint16_t iev_freq; /* setting in Mhz */ uint8_t iev_ieee; /* IEEE channel number */ /* XXX timestamp? */ uint8_t iev_type; /* IEEE80211_NOTIFY_CAC_* */ }; struct ieee80211_radar_event { uint32_t iev_flags; /* channel flags */ uint16_t iev_freq; /* setting in Mhz */ uint8_t iev_ieee; /* IEEE channel number */ /* XXX timestamp? */ }; struct ieee80211_auth_event { uint8_t iev_addr[6]; }; struct ieee80211_deauth_event { uint8_t iev_addr[6]; }; struct ieee80211_country_event { uint8_t iev_addr[6]; uint8_t iev_cc[2]; /* ISO country code */ }; struct ieee80211_radio_event { uint8_t iev_state; /* 1 on, 0 off */ }; #define RTM_IEEE80211_ASSOC 100 /* station associate (bss mode) */ #define RTM_IEEE80211_REASSOC 101 /* station re-associate (bss mode) */ #define RTM_IEEE80211_DISASSOC 102 /* station disassociate (bss mode) */ #define RTM_IEEE80211_JOIN 103 /* station join (ap mode) */ #define RTM_IEEE80211_LEAVE 104 /* station leave (ap mode) */ #define RTM_IEEE80211_SCAN 105 /* scan complete, results available */ #define RTM_IEEE80211_REPLAY 106 /* sequence counter replay detected */ #define RTM_IEEE80211_MICHAEL 107 /* Michael MIC failure detected */ #define RTM_IEEE80211_REJOIN 108 /* station re-associate (ap mode) */ #define RTM_IEEE80211_WDS 109 /* WDS discovery (ap mode) */ #define RTM_IEEE80211_CSA 110 /* Channel Switch Announcement event */ #define RTM_IEEE80211_RADAR 111 /* radar event */ #define RTM_IEEE80211_CAC 112 /* Channel Availability Check event */ #define RTM_IEEE80211_DEAUTH 113 /* station deauthenticate */ #define RTM_IEEE80211_AUTH 114 /* station authenticate (ap mode) */ #define RTM_IEEE80211_COUNTRY 115 /* discovered country code (sta mode) */ #define RTM_IEEE80211_RADIO 116 /* RF kill switch state change */ /* * Structure prepended to raw packets sent through the bpf * interface when set to DLT_IEEE802_11_RADIO. This allows * user applications to specify pretty much everything in * an Atheros tx descriptor. XXX need to generalize. * * XXX cannot be more than 14 bytes as it is copied to a sockaddr's * XXX sa_data area. */ struct ieee80211_bpf_params { uint8_t ibp_vers; /* version */ #define IEEE80211_BPF_VERSION 0 uint8_t ibp_len; /* header length in bytes */ uint8_t ibp_flags; #define IEEE80211_BPF_SHORTPRE 0x01 /* tx with short preamble */ #define IEEE80211_BPF_NOACK 0x02 /* tx with no ack */ #define IEEE80211_BPF_CRYPTO 0x04 /* tx with h/w encryption */ #define IEEE80211_BPF_FCS 0x10 /* frame incldues FCS */ #define IEEE80211_BPF_DATAPAD 0x20 /* frame includes data padding */ #define IEEE80211_BPF_RTS 0x40 /* tx with RTS/CTS */ #define IEEE80211_BPF_CTS 0x80 /* tx with CTS only */ uint8_t ibp_pri; /* WME/WMM AC+tx antenna */ uint8_t ibp_try0; /* series 1 try count */ uint8_t ibp_rate0; /* series 1 IEEE tx rate */ uint8_t ibp_power; /* tx power (device units) */ uint8_t ibp_ctsrate; /* IEEE tx rate for CTS */ uint8_t ibp_try1; /* series 2 try count */ uint8_t ibp_rate1; /* series 2 IEEE tx rate */ uint8_t ibp_try2; /* series 3 try count */ uint8_t ibp_rate2; /* series 3 IEEE tx rate */ uint8_t ibp_try3; /* series 4 try count */ uint8_t ibp_rate3; /* series 4 IEEE tx rate */ }; #ifdef _KERNEL struct ieee80211_tx_params { struct ieee80211_bpf_params params; }; int ieee80211_add_xmit_params(struct mbuf *m, const struct ieee80211_bpf_params *); int ieee80211_get_xmit_params(struct mbuf *m, struct ieee80211_bpf_params *); #define IEEE80211_MAX_CHAINS 3 #define IEEE80211_MAX_EVM_PILOTS 6 #define IEEE80211_R_NF 0x0000001 /* global NF value valid */ #define IEEE80211_R_RSSI 0x0000002 /* global RSSI value valid */ #define IEEE80211_R_C_CHAIN 0x0000004 /* RX chain count valid */ #define IEEE80211_R_C_NF 0x0000008 /* per-chain NF value valid */ #define IEEE80211_R_C_RSSI 0x0000010 /* per-chain RSSI value valid */ #define IEEE80211_R_C_EVM 0x0000020 /* per-chain EVM valid */ #define IEEE80211_R_C_HT40 0x0000040 /* RX'ed packet is 40mhz, pilots 4,5 valid */ #define IEEE80211_R_FREQ 0x0000080 /* Freq value populated, MHz */ #define IEEE80211_R_IEEE 0x0000100 /* IEEE value populated */ #define IEEE80211_R_BAND 0x0000200 /* Frequency band populated */ struct ieee80211_rx_stats { uint32_t r_flags; /* IEEE80211_R_* flags */ uint8_t c_chain; /* number of RX chains involved */ int16_t c_nf_ctl[IEEE80211_MAX_CHAINS]; /* per-chain NF */ int16_t c_nf_ext[IEEE80211_MAX_CHAINS]; /* per-chain NF */ int16_t c_rssi_ctl[IEEE80211_MAX_CHAINS]; /* per-chain RSSI */ int16_t c_rssi_ext[IEEE80211_MAX_CHAINS]; /* per-chain RSSI */ uint8_t nf; /* global NF */ uint8_t rssi; /* global RSSI */ uint8_t evm[IEEE80211_MAX_CHAINS][IEEE80211_MAX_EVM_PILOTS]; /* per-chain, per-pilot EVM values */ uint16_t c_freq; uint8_t c_ieee; }; struct ieee80211_rx_params { struct ieee80211_rx_stats params; }; int ieee80211_add_rx_params(struct mbuf *m, const struct ieee80211_rx_stats *rxs); int ieee80211_get_rx_params(struct mbuf *m, struct ieee80211_rx_stats *rxs); #endif /* _KERNEL */ /* * Malloc API. Other BSD operating systems have slightly * different malloc/free namings (eg DragonflyBSD.) */ #define IEEE80211_MALLOC malloc #define IEEE80211_FREE free /* XXX TODO: get rid of WAITOK, fix all the users of it? */ #define IEEE80211_M_NOWAIT M_NOWAIT #define IEEE80211_M_WAITOK M_WAITOK #define IEEE80211_M_ZERO M_ZERO /* XXX TODO: the type fields */ #endif /* _NET80211_IEEE80211_FREEBSD_H_ */ Index: projects/clang380-import/sys/net80211/ieee80211_scan_sw.c =================================================================== --- projects/clang380-import/sys/net80211/ieee80211_scan_sw.c (revision 293035) +++ projects/clang380-import/sys/net80211/ieee80211_scan_sw.c (revision 293036) @@ -1,958 +1,958 @@ /*- * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 scanning support. */ #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include struct scan_state { struct ieee80211_scan_state base; /* public state */ u_int ss_iflags; /* flags used internally */ #define ISCAN_MINDWELL 0x0001 /* min dwell time reached */ #define ISCAN_DISCARD 0x0002 /* discard rx'd frames */ #define ISCAN_CANCEL 0x0004 /* cancel current scan */ #define ISCAN_ABORT 0x0008 /* end the scan immediately */ unsigned long ss_chanmindwell; /* min dwell on curchan */ unsigned long ss_scanend; /* time scan must stop */ u_int ss_duration; /* duration for next scan */ struct task ss_scan_task; /* scan execution */ struct cv ss_scan_cv; /* scan signal */ struct callout ss_scan_timer; /* scan timer */ }; #define SCAN_PRIVATE(ss) ((struct scan_state *) ss) /* * Amount of time to go off-channel during a background * scan. This value should be large enough to catch most * ap's but short enough that we can return on-channel * before our listen interval expires. * * XXX tunable * XXX check against configured listen interval */ #define IEEE80211_SCAN_OFFCHANNEL msecs_to_ticks(150) /* * Roaming-related defaults. RSSI thresholds are as returned by the * driver (.5dBm). Transmit rate thresholds are IEEE rate codes (i.e * .5M units) or MCS. */ /* rssi thresholds */ #define ROAM_RSSI_11A_DEFAULT 14 /* 11a bss */ #define ROAM_RSSI_11B_DEFAULT 14 /* 11b bss */ #define ROAM_RSSI_11BONLY_DEFAULT 14 /* 11b-only bss */ /* transmit rate thresholds */ #define ROAM_RATE_11A_DEFAULT 2*12 /* 11a bss */ #define ROAM_RATE_11B_DEFAULT 2*5 /* 11b bss */ #define ROAM_RATE_11BONLY_DEFAULT 2*1 /* 11b-only bss */ #define ROAM_RATE_HALF_DEFAULT 2*6 /* half-width 11a/g bss */ #define ROAM_RATE_QUARTER_DEFAULT 2*3 /* quarter-width 11a/g bss */ #define ROAM_MCS_11N_DEFAULT (1 | IEEE80211_RATE_MCS) /* 11n bss */ static void scan_curchan(struct ieee80211_scan_state *, unsigned long); static void scan_mindwell(struct ieee80211_scan_state *); static void scan_signal(void *); static void scan_task(void *, int); MALLOC_DEFINE(M_80211_SCAN, "80211scan", "802.11 scan state"); static void ieee80211_swscan_detach(struct ieee80211com *ic) { struct ieee80211_scan_state *ss = ic->ic_scan; if (ss != NULL) { IEEE80211_LOCK(ic); SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_ABORT; scan_signal(ss); IEEE80211_UNLOCK(ic); ieee80211_draintask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); callout_drain(&SCAN_PRIVATE(ss)->ss_scan_timer); KASSERT((ic->ic_flags & IEEE80211_F_SCAN) == 0, ("scan still running")); /* * For now, do the ss_ops detach here rather * than ieee80211_scan_detach(). * * I'll figure out how to cleanly split things up * at a later date. */ if (ss->ss_ops != NULL) { ss->ss_ops->scan_detach(ss); ss->ss_ops = NULL; } ic->ic_scan = NULL; IEEE80211_FREE(SCAN_PRIVATE(ss), M_80211_SCAN); } } static void ieee80211_swscan_vattach(struct ieee80211vap *vap) { /* nothing to do for now */ /* * TODO: all of the vap scan calls should be methods! */ } static void ieee80211_swscan_vdetach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_LOCK_ASSERT(ic); ss = ic->ic_scan; if (ss != NULL && ss->ss_vap == vap) { if (ic->ic_flags & IEEE80211_F_SCAN) { SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_ABORT; scan_signal(ss); } } } static void ieee80211_swscan_set_scan_duration(struct ieee80211vap *vap, u_int duration) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); /* NB: flush frames rx'd before 1st channel change */ SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_DISCARD; SCAN_PRIVATE(ss)->ss_duration = duration; } /* * Start a scan unless one is already going. */ static int ieee80211_swscan_start_scan_locked(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); if (ic->ic_flags & IEEE80211_F_CSAPENDING) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: scan inhibited by pending channel change\n", __func__); } else if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan, duration %u mindwell %u maxdwell %u, desired mode %s, %s%s%s%s%s%s\n" , __func__ , flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive" , duration, mindwell, maxdwell , ieee80211_phymode_name[vap->iv_des_mode] , flags & IEEE80211_SCAN_FLUSH ? "flush" : "append" , flags & IEEE80211_SCAN_NOPICK ? ", nopick" : "" , flags & IEEE80211_SCAN_NOJOIN ? ", nojoin" : "" , flags & IEEE80211_SCAN_NOBCAST ? ", nobcast" : "" , flags & IEEE80211_SCAN_PICK1ST ? ", pick1st" : "" , flags & IEEE80211_SCAN_ONCE ? ", once" : "" ); ieee80211_scan_update_locked(vap, scan); if (ss->ss_ops != NULL) { if ((flags & IEEE80211_SCAN_NOSSID) == 0) ieee80211_scan_copy_ssid(vap, ss, nssid, ssids); /* NB: top 4 bits for internal use */ ss->ss_flags = flags & 0xfff; if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) vap->iv_stats.is_scan_active++; else vap->iv_stats.is_scan_passive++; if (flags & IEEE80211_SCAN_FLUSH) ss->ss_ops->scan_flush(ss); if (flags & IEEE80211_SCAN_BGSCAN) ic->ic_flags_ext |= IEEE80211_FEXT_BGSCAN; /* Set duration for this particular scan */ ieee80211_swscan_set_scan_duration(vap, duration); ss->ss_next = 0; ss->ss_mindwell = mindwell; ss->ss_maxdwell = maxdwell; /* NB: scan_start must be before the scan runtask */ ss->ss_ops->scan_start(ss, vap); #ifdef IEEE80211_DEBUG if (ieee80211_msg_scan(vap)) ieee80211_scan_dump(ss); #endif /* IEEE80211_DEBUG */ ic->ic_flags |= IEEE80211_F_SCAN; /* Start scan task */ ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); } return 1; } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan already in progress\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); } return 0; } /* * Start a scan unless one is already going. * * Called without the comlock held; grab the comlock as appropriate. */ static int ieee80211_swscan_start_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; int result; IEEE80211_UNLOCK_ASSERT(ic); IEEE80211_LOCK(ic); result = ieee80211_swscan_start_scan_locked(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); IEEE80211_UNLOCK(ic); return result; } /* * Check the scan cache for an ap/channel to use; if that * fails then kick off a new scan. * * Called with the comlock held. * * XXX TODO: split out! */ static int ieee80211_swscan_check_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; int result; IEEE80211_LOCK_ASSERT(ic); if (ss->ss_ops != NULL) { /* XXX verify ss_ops matches vap->iv_opmode */ if ((flags & IEEE80211_SCAN_NOSSID) == 0) { /* * Update the ssid list and mark flags so if * we call start_scan it doesn't duplicate work. */ ieee80211_scan_copy_ssid(vap, ss, nssid, ssids); flags |= IEEE80211_SCAN_NOSSID; } if ((ic->ic_flags & IEEE80211_F_SCAN) == 0 && (flags & IEEE80211_SCAN_FLUSH) == 0 && time_before(ticks, ic->ic_lastscan + vap->iv_scanvalid)) { /* * We're not currently scanning and the cache is * deemed hot enough to consult. Lock out others * by marking IEEE80211_F_SCAN while we decide if * something is already in the scan cache we can * use. Also discard any frames that might come * in while temporarily marked as scanning. */ SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_DISCARD; ic->ic_flags |= IEEE80211_F_SCAN; /* NB: need to use supplied flags in check */ ss->ss_flags = flags & 0xff; result = ss->ss_ops->scan_end(ss, vap); ic->ic_flags &= ~IEEE80211_F_SCAN; SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_DISCARD; if (result) { ieee80211_notify_scan_done(vap); return 1; } } } result = ieee80211_swscan_start_scan_locked(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); return result; } /* * Restart a previous scan. If the previous scan completed * then we start again using the existing channel list. */ static int ieee80211_swscan_bg_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; /* XXX assert unlocked? */ // IEEE80211_UNLOCK_ASSERT(ic); IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { u_int duration; /* * Go off-channel for a fixed interval that is large * enough to catch most ap's but short enough that * we can return on-channel before our listen interval * expires. */ duration = IEEE80211_SCAN_OFFCHANNEL; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan, ticks %u duration %lu\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive", ticks, duration); ieee80211_scan_update_locked(vap, scan); if (ss->ss_ops != NULL) { ss->ss_vap = vap; /* * A background scan does not select a new sta; it * just refreshes the scan cache. Also, indicate * the scan logic should follow the beacon schedule: * we go off-channel and scan for a while, then * return to the bss channel to receive a beacon, * then go off-channel again. All during this time * we notify the ap we're in power save mode. When * the scan is complete we leave power save mode. * If any beacon indicates there are frames pending * for us then we drop out of power save mode * (and background scan) automatically by way of the * usual sta power save logic. */ ss->ss_flags |= IEEE80211_SCAN_NOPICK | IEEE80211_SCAN_BGSCAN | flags ; /* if previous scan completed, restart */ if (ss->ss_next >= ss->ss_last) { if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) vap->iv_stats.is_scan_active++; else vap->iv_stats.is_scan_passive++; /* * NB: beware of the scan cache being flushed; * if the channel list is empty use the * scan_start method to populate it. */ ss->ss_next = 0; if (ss->ss_last != 0) ss->ss_ops->scan_restart(ss, vap); else { ss->ss_ops->scan_start(ss, vap); #ifdef IEEE80211_DEBUG if (ieee80211_msg_scan(vap)) ieee80211_scan_dump(ss); #endif /* IEEE80211_DEBUG */ } } ieee80211_swscan_set_scan_duration(vap, duration); ss->ss_maxdwell = duration; ic->ic_flags |= IEEE80211_F_SCAN; ic->ic_flags_ext |= IEEE80211_FEXT_BGSCAN; ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); } else { /* XXX msg+stat */ } } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan already in progress\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); } IEEE80211_UNLOCK(ic); /* NB: racey, does it matter? */ return (ic->ic_flags & IEEE80211_F_SCAN); } /* * Cancel any scan currently going on for the specified vap. */ static void ieee80211_swscan_cancel_scan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) && ss->ss_vap == vap && (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: cancel %s scan\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); /* clear bg scan NOPICK and mark cancel request */ ss->ss_flags &= ~IEEE80211_SCAN_NOPICK; SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_CANCEL; /* wake up the scan task */ scan_signal(ss); } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called; F_SCAN=%d, vap=%s, CANCEL=%d\n", __func__, !! (ic->ic_flags & IEEE80211_F_SCAN), (ss->ss_vap == vap ? "match" : "nomatch"), !! (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL)); } IEEE80211_UNLOCK(ic); } /* * Cancel any scan currently going on. */ static void ieee80211_swscan_cancel_anyscan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) && (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: cancel %s scan\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); /* clear bg scan NOPICK and mark cancel request */ ss->ss_flags &= ~IEEE80211_SCAN_NOPICK; SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_CANCEL; /* wake up the scan task */ scan_signal(ss); } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called; F_SCAN=%d, vap=%s, CANCEL=%d\n", __func__, !! (ic->ic_flags & IEEE80211_F_SCAN), (ss->ss_vap == vap ? "match" : "nomatch"), !! (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL)); } IEEE80211_UNLOCK(ic); } /* * Public access to scan_next for drivers that manage * scanning themselves (e.g. for firmware-based devices). */ static void ieee80211_swscan_scan_next(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__); /* wake up the scan task */ IEEE80211_LOCK(ic); scan_signal(ss); IEEE80211_UNLOCK(ic); } /* * Public access to scan_next for drivers that are not able to scan single * channels (e.g. for firmware-based devices). */ static void ieee80211_swscan_scan_done(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_LOCK_ASSERT(ic); ss = ic->ic_scan; scan_signal(ss); } /* * Probe the curent channel, if allowed, while scanning. * If the channel is not marked passive-only then send * a probe request immediately. Otherwise mark state and * listen for beacons on the channel; if we receive something * then we'll transmit a probe request. */ static void ieee80211_swscan_probe_curchan(struct ieee80211vap *vap, int force) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; struct ifnet *ifp = vap->iv_ifp; int i; /* * Send directed probe requests followed by any * broadcast probe request. * XXX remove dependence on ic/vap->iv_bss */ for (i = 0; i < ss->ss_nssid; i++) ieee80211_send_probereq(vap->iv_bss, vap->iv_myaddr, ifp->if_broadcastaddr, ifp->if_broadcastaddr, ss->ss_ssid[i].ssid, ss->ss_ssid[i].len); if ((ss->ss_flags & IEEE80211_SCAN_NOBCAST) == 0) ieee80211_send_probereq(vap->iv_bss, vap->iv_myaddr, ifp->if_broadcastaddr, ifp->if_broadcastaddr, "", 0); } /* * Scan curchan. If this is an active scan and the channel * is not marked passive then send probe request frame(s). * Arrange for the channel change after maxdwell ticks. */ static void scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell) { struct ieee80211vap *vap = ss->ss_vap; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: calling; maxdwell=%lu\n", __func__, maxdwell); IEEE80211_LOCK(vap->iv_ic); if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) ieee80211_probe_curchan(vap, 0); callout_reset(&SCAN_PRIVATE(ss)->ss_scan_timer, maxdwell, scan_signal, ss); IEEE80211_UNLOCK(vap->iv_ic); } static void scan_signal(void *arg) { struct ieee80211_scan_state *ss = (struct ieee80211_scan_state *) arg; IEEE80211_LOCK_ASSERT(ss->ss_ic); cv_signal(&SCAN_PRIVATE(ss)->ss_scan_cv); } /* * Handle mindwell requirements completed; initiate a channel * change to the next channel asap. */ static void scan_mindwell(struct ieee80211_scan_state *ss) { struct ieee80211com *ic = ss->ss_ic; IEEE80211_DPRINTF(ss->ss_vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__); IEEE80211_LOCK(ic); scan_signal(ss); IEEE80211_UNLOCK(ic); } static void scan_task(void *arg, int pending) { #define ISCAN_REP (ISCAN_MINDWELL | ISCAN_DISCARD) struct ieee80211_scan_state *ss = (struct ieee80211_scan_state *) arg; struct ieee80211vap *vap = ss->ss_vap; struct ieee80211com *ic = ss->ss_ic; struct ieee80211_channel *chan; unsigned long maxdwell, scanend; int scandone = 0; IEEE80211_LOCK(ic); if (vap == NULL || (ic->ic_flags & IEEE80211_F_SCAN) == 0 || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT)) { /* Cancelled before we started */ goto done; } if (ss->ss_next == ss->ss_last) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no channels to scan\n", __func__); scandone = 1; goto done; } if (vap->iv_opmode == IEEE80211_M_STA && vap->iv_state == IEEE80211_S_RUN) { if ((vap->iv_bss->ni_flags & IEEE80211_NODE_PWR_MGT) == 0) { /* Enable station power save mode */ vap->iv_sta_ps(vap, 1); /* * Use an 1ms delay so the null data frame has a chance * to go out. * XXX Should use M_TXCB mechanism to eliminate this. */ cv_timedwait(&SCAN_PRIVATE(ss)->ss_scan_cv, - IEEE80211_LOCK_OBJ(ic), hz / 1000); + IEEE80211_LOCK_OBJ(ic), msecs_to_ticks(1)); if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) goto done; } } scanend = ticks + SCAN_PRIVATE(ss)->ss_duration; /* XXX scan state can change! Re-validate scan state! */ IEEE80211_UNLOCK(ic); ic->ic_scan_start(ic); /* notify driver */ IEEE80211_LOCK(ic); for (;;) { scandone = (ss->ss_next >= ss->ss_last) || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: loop start; scandone=%d\n", __func__, scandone); if (scandone || (ss->ss_flags & IEEE80211_SCAN_GOTPICK) || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) || time_after(ticks + ss->ss_mindwell, scanend)) break; chan = ss->ss_chans[ss->ss_next++]; /* * Watch for truncation due to the scan end time. */ if (time_after(ticks + ss->ss_maxdwell, scanend)) maxdwell = scanend - ticks; else maxdwell = ss->ss_maxdwell; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: chan %3d%c -> %3d%c [%s, dwell min %lums max %lums]\n", __func__, ieee80211_chan2ieee(ic, ic->ic_curchan), ieee80211_channel_type_char(ic->ic_curchan), ieee80211_chan2ieee(ic, chan), ieee80211_channel_type_char(chan), (ss->ss_flags & IEEE80211_SCAN_ACTIVE) && (chan->ic_flags & IEEE80211_CHAN_PASSIVE) == 0 ? "active" : "passive", ticks_to_msecs(ss->ss_mindwell), ticks_to_msecs(maxdwell)); /* * Potentially change channel and phy mode. */ ic->ic_curchan = chan; ic->ic_rt = ieee80211_get_ratetable(chan); IEEE80211_UNLOCK(ic); /* * Perform the channel change and scan unlocked so the driver * may sleep. Once set_channel returns the hardware has * completed the channel change. */ ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); /* * Scan curchan. Drivers for "intelligent hardware" * override ic_scan_curchan to tell the device to do * the work. Otherwise we manage the work outselves; * sending a probe request (as needed), and arming the * timeout to switch channels after maxdwell ticks. * * scan_curchan should only pause for the time required to * prepare/initiate the hardware for the scan (if at all), the * below condvar is used to sleep for the channels dwell time * and allows it to be signalled for abort. */ ic->ic_scan_curchan(ss, maxdwell); IEEE80211_LOCK(ic); /* XXX scan state can change! Re-validate scan state! */ SCAN_PRIVATE(ss)->ss_chanmindwell = ticks + ss->ss_mindwell; /* clear mindwell lock and initial channel change flush */ SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_REP; if ((SCAN_PRIVATE(ss)->ss_iflags & (ISCAN_CANCEL|ISCAN_ABORT))) continue; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: waiting\n", __func__); /* Wait to be signalled to scan the next channel */ cv_wait(&SCAN_PRIVATE(ss)->ss_scan_cv, IEEE80211_LOCK_OBJ(ic)); } IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: out\n", __func__); if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) goto done; IEEE80211_UNLOCK(ic); ic->ic_scan_end(ic); /* notify driver */ IEEE80211_LOCK(ic); /* XXX scan state can change! Re-validate scan state! */ /* * Since a cancellation may have occured during one of the * driver calls (whilst unlocked), update scandone. */ if (scandone == 0 && ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0)) { /* XXX printf? */ if_printf(vap->iv_ifp, "%s: OOPS! scan cancelled during driver call (1)!\n", __func__); scandone = 1; } /* * Record scan complete time. Note that we also do * this when canceled so any background scan will * not be restarted for a while. */ if (scandone) ic->ic_lastscan = ticks; /* return to the bss channel */ if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && ic->ic_curchan != ic->ic_bsschan) { ieee80211_setupcurchan(ic, ic->ic_bsschan); IEEE80211_UNLOCK(ic); ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); IEEE80211_LOCK(ic); } /* clear internal flags and any indication of a pick */ SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_REP; ss->ss_flags &= ~IEEE80211_SCAN_GOTPICK; /* * If not canceled and scan completed, do post-processing. * If the callback function returns 0, then it wants to * continue/restart scanning. Unfortunately we needed to * notify the driver to end the scan above to avoid having * rx frames alter the scan candidate list. */ if ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0 && !ss->ss_ops->scan_end(ss, vap) && (ss->ss_flags & IEEE80211_SCAN_ONCE) == 0 && time_before(ticks + ss->ss_mindwell, scanend)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: done, restart " "[ticks %u, dwell min %lu scanend %lu]\n", __func__, ticks, ss->ss_mindwell, scanend); ss->ss_next = 0; /* reset to begining */ if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) vap->iv_stats.is_scan_active++; else vap->iv_stats.is_scan_passive++; ss->ss_ops->scan_restart(ss, vap); /* XXX? */ ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); IEEE80211_UNLOCK(ic); return; } /* past here, scandone is ``true'' if not in bg mode */ if ((ss->ss_flags & IEEE80211_SCAN_BGSCAN) == 0) scandone = 1; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s, [ticks %u, dwell min %lu scanend %lu]\n", __func__, scandone ? "done" : "stopped", ticks, ss->ss_mindwell, scanend); /* * Since a cancellation may have occured during one of the * driver calls (whilst unlocked), update scandone. */ if (scandone == 0 && ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0)) { /* XXX printf? */ if_printf(vap->iv_ifp, "%s: OOPS! scan cancelled during driver call (2)!\n", __func__); scandone = 1; } /* * Clear the SCAN bit first in case frames are * pending on the station power save queue. If * we defer this then the dispatch of the frames * may generate a request to cancel scanning. */ done: ic->ic_flags &= ~IEEE80211_F_SCAN; /* * Drop out of power save mode when a scan has * completed. If this scan was prematurely terminated * because it is a background scan then don't notify * the ap; we'll either return to scanning after we * receive the beacon frame or we'll drop out of power * save mode because the beacon indicates we have frames * waiting for us. */ if (scandone) { vap->iv_sta_ps(vap, 0); if (ss->ss_next >= ss->ss_last) { ieee80211_notify_scan_done(vap); ic->ic_flags_ext &= ~IEEE80211_FEXT_BGSCAN; } } SCAN_PRIVATE(ss)->ss_iflags &= ~(ISCAN_CANCEL|ISCAN_ABORT); ss->ss_flags &= ~(IEEE80211_SCAN_ONCE | IEEE80211_SCAN_PICK1ST); IEEE80211_UNLOCK(ic); #undef ISCAN_REP } /* * Process a beacon or probe response frame. */ static void ieee80211_swscan_add_scan(struct ieee80211vap *vap, struct ieee80211_channel *curchan, const struct ieee80211_scanparams *sp, const struct ieee80211_frame *wh, int subtype, int rssi, int noise) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; /* XXX locking */ /* * Frames received during startup are discarded to avoid * using scan state setup on the initial entry to the timer * callback. This can occur because the device may enable * rx prior to our doing the initial channel change in the * timer routine. */ if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_DISCARD) return; #ifdef IEEE80211_DEBUG if (ieee80211_msg_scan(vap) && (ic->ic_flags & IEEE80211_F_SCAN)) ieee80211_scan_dump_probe_beacon(subtype, 1, wh->i_addr2, sp, rssi); #endif if (ss->ss_ops != NULL && ss->ss_ops->scan_add(ss, curchan, sp, wh, subtype, rssi, noise)) { /* * If we've reached the min dwell time terminate * the timer so we'll switch to the next channel. */ if ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_MINDWELL) == 0 && time_after_eq(ticks, SCAN_PRIVATE(ss)->ss_chanmindwell)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: chan %3d%c min dwell met (%u > %lu)\n", __func__, ieee80211_chan2ieee(ic, ic->ic_curchan), ieee80211_channel_type_char(ic->ic_curchan), ticks, SCAN_PRIVATE(ss)->ss_chanmindwell); SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_MINDWELL; /* * NB: trigger at next clock tick or wait for the * hardware. */ ic->ic_scan_mindwell(ss); } } } static struct ieee80211_scan_methods swscan_methods = { .sc_attach = ieee80211_swscan_attach, .sc_detach = ieee80211_swscan_detach, .sc_vattach = ieee80211_swscan_vattach, .sc_vdetach = ieee80211_swscan_vdetach, .sc_set_scan_duration = ieee80211_swscan_set_scan_duration, .sc_start_scan = ieee80211_swscan_start_scan, .sc_check_scan = ieee80211_swscan_check_scan, .sc_bg_scan = ieee80211_swscan_bg_scan, .sc_cancel_scan = ieee80211_swscan_cancel_scan, .sc_cancel_anyscan = ieee80211_swscan_cancel_anyscan, .sc_scan_next = ieee80211_swscan_scan_next, .sc_scan_done = ieee80211_swscan_scan_done, .sc_scan_probe_curchan = ieee80211_swscan_probe_curchan, .sc_add_scan = ieee80211_swscan_add_scan }; /* * Default scan attach method. */ void ieee80211_swscan_attach(struct ieee80211com *ic) { struct scan_state *ss; /* * Setup the default methods */ ic->ic_scan_methods = &swscan_methods; /* Allocate initial scan state */ ss = (struct scan_state *) IEEE80211_MALLOC(sizeof(struct scan_state), M_80211_SCAN, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); if (ss == NULL) { ic->ic_scan = NULL; return; } callout_init_mtx(&ss->ss_scan_timer, IEEE80211_LOCK_OBJ(ic), 0); cv_init(&ss->ss_scan_cv, "scan"); TASK_INIT(&ss->ss_scan_task, 0, scan_task, ss); ic->ic_scan = &ss->base; ss->base.ss_ic = ic; ic->ic_scan_curchan = scan_curchan; ic->ic_scan_mindwell = scan_mindwell; } Index: projects/clang380-import/sys/net80211/ieee80211_var.h =================================================================== --- projects/clang380-import/sys/net80211/ieee80211_var.h (revision 293035) +++ projects/clang380-import/sys/net80211/ieee80211_var.h (revision 293036) @@ -1,1001 +1,1002 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_VAR_H_ #define _NET80211_IEEE80211_VAR_H_ /* * Definitions for IEEE 802.11 drivers. */ /* NB: portability glue must go first */ #if defined(__NetBSD__) #include #elif defined(__FreeBSD__) #include #elif defined(__linux__) #include #else #error "No support for your operating system!" #endif #include #include #include #include #include #include /* for ieee80211_stats */ #include #include #include #include #include #include #define IEEE80211_TXPOWER_MAX 100 /* .5 dBm (XXX units?) */ #define IEEE80211_TXPOWER_MIN 0 /* kill radio */ #define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */ #define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */ #define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */ #define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */ #define IEEE80211_BGSCAN_INTVAL_MIN 15 /* min bg scan intvl (secs) */ #define IEEE80211_BGSCAN_INTVAL_DEFAULT (5*60) /* default bg scan intvl */ #define IEEE80211_BGSCAN_IDLE_MIN 100 /* min idle time (ms) */ #define IEEE80211_BGSCAN_IDLE_DEFAULT 250 /* default idle time (ms) */ #define IEEE80211_SCAN_VALID_MIN 10 /* min scan valid time (secs) */ #define IEEE80211_SCAN_VALID_DEFAULT 60 /* default scan valid time */ #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ #define IEEE80211_FIXED_RATE_NONE 0xff #define IEEE80211_TXMAX_DEFAULT 6 /* default ucast max retries */ #define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX #define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024) #define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000) +/* XXX TODO: cap this at 1, in case hz is not 1000 */ #define IEEE80211_TU_TO_TICKS(x)(((x) * 1024 * hz) / (1000 * 1000)) /* * 802.11 control state is split into a common portion that maps * 1-1 to a physical device and one or more "Virtual AP's" (VAP) * that are bound to an ieee80211com instance and share a single * underlying device. Each VAP has a corresponding OS device * entity through which traffic flows and that applications use * for issuing ioctls, etc. */ /* * Data common to one or more virtual AP's. State shared by * the underlying device and the net80211 layer is exposed here; * e.g. device-specific callbacks. */ struct ieee80211vap; typedef void (*ieee80211vap_attach)(struct ieee80211vap *); struct ieee80211_appie { uint16_t ie_len; /* size of ie_data */ uint8_t ie_data[]; /* user-specified IE's */ }; struct ieee80211_tdma_param; struct ieee80211_rate_table; struct ieee80211_tx_ampdu; struct ieee80211_rx_ampdu; struct ieee80211_superg; struct ieee80211_frame; struct ieee80211com { void *ic_softc; /* driver softc */ const char *ic_name; /* usually device name */ ieee80211_com_lock_t ic_comlock; /* state update lock */ ieee80211_tx_lock_t ic_txlock; /* ic/vap TX lock */ LIST_ENTRY(ieee80211com) ic_next; /* on global list */ TAILQ_HEAD(, ieee80211vap) ic_vaps; /* list of vap instances */ int ic_headroom; /* driver tx headroom needs */ enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */ enum ieee80211_opmode ic_opmode; /* operation mode */ struct callout ic_inact; /* inactivity processing */ struct taskqueue *ic_tq; /* deferred state thread */ struct task ic_parent_task; /* deferred parent processing */ struct task ic_promisc_task;/* deferred promisc update */ struct task ic_mcast_task; /* deferred mcast update */ struct task ic_chan_task; /* deferred channel change */ struct task ic_bmiss_task; /* deferred beacon miss hndlr */ struct task ic_chw_task; /* deferred HT CHW update */ struct task ic_wme_task; /* deferred WME update */ struct task ic_restart_task; /* deferred device restart */ counter_u64_t ic_ierrors; /* input errors */ counter_u64_t ic_oerrors; /* output errors */ uint32_t ic_flags; /* state flags */ uint32_t ic_flags_ext; /* extended state flags */ uint32_t ic_flags_ht; /* HT state flags */ uint32_t ic_flags_ven; /* vendor state flags */ uint32_t ic_caps; /* capabilities */ uint32_t ic_htcaps; /* HT capabilities */ uint32_t ic_htextcaps; /* HT extended capabilities */ uint32_t ic_cryptocaps; /* crypto capabilities */ uint8_t ic_modecaps[2]; /* set of mode capabilities */ uint8_t ic_promisc; /* vap's needing promisc mode */ uint8_t ic_allmulti; /* vap's needing all multicast*/ uint8_t ic_nrunning; /* vap's marked running */ uint8_t ic_curmode; /* current mode */ uint8_t ic_macaddr[IEEE80211_ADDR_LEN]; uint16_t ic_bintval; /* beacon interval */ uint16_t ic_lintval; /* listen interval */ uint16_t ic_holdover; /* PM hold over duration */ uint16_t ic_txpowlimit; /* global tx power limit */ struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX]; /* * Channel state: * * ic_channels is the set of available channels for the device; * it is setup by the driver * ic_nchans is the number of valid entries in ic_channels * ic_chan_avail is a bit vector of these channels used to check * whether a channel is available w/o searching the channel table. * ic_chan_active is a (potentially) constrained subset of * ic_chan_avail that reflects any mode setting or user-specified * limit on the set of channels to use/scan * ic_curchan is the current channel the device is set to; it may * be different from ic_bsschan when we are off-channel scanning * or otherwise doing background work * ic_bsschan is the channel selected for operation; it may * be undefined (IEEE80211_CHAN_ANYC) * ic_prevchan is a cached ``previous channel'' used to optimize * lookups when switching back+forth between two channels * (e.g. for dynamic turbo) */ int ic_nchans; /* # entries in ic_channels */ struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX]; uint8_t ic_chan_avail[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_active[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_scan[IEEE80211_CHAN_BYTES]; struct ieee80211_channel *ic_curchan; /* current channel */ const struct ieee80211_rate_table *ic_rt; /* table for ic_curchan */ struct ieee80211_channel *ic_bsschan; /* bss channel */ struct ieee80211_channel *ic_prevchan; /* previous channel */ struct ieee80211_regdomain ic_regdomain;/* regulatory data */ struct ieee80211_appie *ic_countryie; /* calculated country ie */ struct ieee80211_channel *ic_countryie_chan; /* 802.11h/DFS state */ struct ieee80211_channel *ic_csa_newchan;/* channel for doing CSA */ short ic_csa_mode; /* mode for doing CSA */ short ic_csa_count; /* count for doing CSA */ struct ieee80211_dfs_state ic_dfs; /* DFS state */ struct ieee80211_scan_state *ic_scan; /* scan state */ struct ieee80211_scan_methods *ic_scan_methods; /* scan methods */ int ic_lastdata; /* time of last data frame */ int ic_lastscan; /* time last scan completed */ /* NB: this is the union of all vap stations/neighbors */ int ic_max_keyix; /* max h/w key index */ struct ieee80211_node_table ic_sta; /* stations/neighbors */ struct ieee80211_ageq ic_stageq; /* frame staging queue */ uint32_t ic_hash_key; /* random key for mac hash */ /* XXX multi-bss: split out common/vap parts */ struct ieee80211_wme_state ic_wme; /* WME/WMM state */ /* XXX multi-bss: can per-vap be done/make sense? */ enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */ uint16_t ic_nonerpsta; /* # non-ERP stations */ uint16_t ic_longslotsta; /* # long slot time stations */ uint16_t ic_sta_assoc; /* stations associated */ uint16_t ic_ht_sta_assoc;/* HT stations associated */ uint16_t ic_ht40_sta_assoc;/* HT40 stations associated */ uint8_t ic_curhtprotmode;/* HTINFO bss state */ enum ieee80211_protmode ic_htprotmode; /* HT protection mode */ int ic_lastnonerp; /* last time non-ERP sta noted*/ int ic_lastnonht; /* last time non-HT sta noted */ uint8_t ic_rxstream; /* # RX streams */ uint8_t ic_txstream; /* # TX streams */ /* optional state for Atheros SuperG protocol extensions */ struct ieee80211_superg *ic_superg; /* radiotap handling */ struct ieee80211_radiotap_header *ic_th;/* tx radiotap headers */ void *ic_txchan; /* channel state in ic_th */ struct ieee80211_radiotap_header *ic_rh;/* rx radiotap headers */ void *ic_rxchan; /* channel state in ic_rh */ int ic_montaps; /* active monitor mode taps */ /* virtual ap create/delete */ struct ieee80211vap* (*ic_vap_create)(struct ieee80211com *, const char [IFNAMSIZ], int, enum ieee80211_opmode, int, const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN]); void (*ic_vap_delete)(struct ieee80211vap *); /* device specific ioctls */ int (*ic_ioctl)(struct ieee80211com *, u_long, void *); /* start/stop device */ void (*ic_parent)(struct ieee80211com *); /* operating mode attachment */ ieee80211vap_attach ic_vattach[IEEE80211_OPMODE_MAX]; /* return hardware/radio capabilities */ void (*ic_getradiocaps)(struct ieee80211com *, int, int *, struct ieee80211_channel []); /* check and/or prepare regdomain state change */ int (*ic_setregdomain)(struct ieee80211com *, struct ieee80211_regdomain *, int, struct ieee80211_channel []); int (*ic_set_quiet)(struct ieee80211_node *, u_int8_t *quiet_elm); /* regular transmit */ int (*ic_transmit)(struct ieee80211com *, struct mbuf *); /* send/recv 802.11 management frame */ int (*ic_send_mgmt)(struct ieee80211_node *, int, int); /* send raw 802.11 frame */ int (*ic_raw_xmit)(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); /* update device state for 802.11 slot time change */ void (*ic_updateslot)(struct ieee80211com *); /* handle multicast state changes */ void (*ic_update_mcast)(struct ieee80211com *); /* handle promiscuous mode changes */ void (*ic_update_promisc)(struct ieee80211com *); /* new station association callback/notification */ void (*ic_newassoc)(struct ieee80211_node *, int); /* TDMA update notification */ void (*ic_tdma_update)(struct ieee80211_node *, const struct ieee80211_tdma_param *, int); /* node state management */ struct ieee80211_node* (*ic_node_alloc)(struct ieee80211vap *, const uint8_t [IEEE80211_ADDR_LEN]); void (*ic_node_free)(struct ieee80211_node *); void (*ic_node_cleanup)(struct ieee80211_node *); void (*ic_node_age)(struct ieee80211_node *); void (*ic_node_drain)(struct ieee80211_node *); int8_t (*ic_node_getrssi)(const struct ieee80211_node*); void (*ic_node_getsignal)(const struct ieee80211_node*, int8_t *, int8_t *); void (*ic_node_getmimoinfo)( const struct ieee80211_node*, struct ieee80211_mimo_info *); /* scanning support */ void (*ic_scan_start)(struct ieee80211com *); void (*ic_scan_end)(struct ieee80211com *); void (*ic_set_channel)(struct ieee80211com *); void (*ic_scan_curchan)(struct ieee80211_scan_state *, unsigned long); void (*ic_scan_mindwell)(struct ieee80211_scan_state *); /* * 802.11n ADDBA support. A simple/generic implementation * of A-MPDU tx aggregation is provided; the driver may * override these methods to provide their own support. * A-MPDU rx re-ordering happens automatically if the * driver passes out-of-order frames to ieee80211_input * from an assocated HT station. */ int (*ic_recv_action)(struct ieee80211_node *, const struct ieee80211_frame *, const uint8_t *frm, const uint8_t *efrm); int (*ic_send_action)(struct ieee80211_node *, int category, int action, void *); /* check if A-MPDU should be enabled this station+ac */ int (*ic_ampdu_enable)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); /* start/stop doing A-MPDU tx aggregation for a station */ int (*ic_addba_request)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int dialogtoken, int baparamset, int batimeout); int (*ic_addba_response)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int status, int baparamset, int batimeout); void (*ic_addba_stop)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); void (*ic_addba_response_timeout)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); /* BAR response received */ void (*ic_bar_response)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int status); /* start/stop doing A-MPDU rx processing for a station */ int (*ic_ampdu_rx_start)(struct ieee80211_node *, struct ieee80211_rx_ampdu *, int baparamset, int batimeout, int baseqctl); void (*ic_ampdu_rx_stop)(struct ieee80211_node *, struct ieee80211_rx_ampdu *); /* The channel width has changed (20<->2040) */ void (*ic_update_chw)(struct ieee80211com *); uint64_t ic_spare[7]; }; struct ieee80211_aclator; struct ieee80211_tdma_state; struct ieee80211_mesh_state; struct ieee80211_hwmp_state; struct ieee80211vap { struct ifmedia iv_media; /* interface media config */ struct ifnet *iv_ifp; /* associated device */ struct bpf_if *iv_rawbpf; /* packet filter structure */ struct sysctl_ctx_list *iv_sysctl; /* dynamic sysctl context */ struct sysctl_oid *iv_oid; /* net.wlan.X sysctl oid */ TAILQ_ENTRY(ieee80211vap) iv_next; /* list of vap instances */ struct ieee80211com *iv_ic; /* back ptr to common state */ const uint8_t *iv_myaddr; /* MAC address: ifp or ic */ uint32_t iv_debug; /* debug msg flags */ struct ieee80211_stats iv_stats; /* statistics */ uint32_t iv_flags; /* state flags */ uint32_t iv_flags_ext; /* extended state flags */ uint32_t iv_flags_ht; /* HT state flags */ uint32_t iv_flags_ven; /* vendor state flags */ uint32_t iv_ifflags; /* ifnet flags */ uint32_t iv_caps; /* capabilities */ uint32_t iv_htcaps; /* HT capabilities */ uint32_t iv_htextcaps; /* HT extended capabilities */ enum ieee80211_opmode iv_opmode; /* operation mode */ enum ieee80211_state iv_state; /* state machine state */ enum ieee80211_state iv_nstate; /* pending state */ int iv_nstate_arg; /* pending state arg */ struct task iv_nstate_task; /* deferred state processing */ struct task iv_swbmiss_task;/* deferred iv_bmiss call */ struct callout iv_mgtsend; /* mgmt frame response timer */ /* inactivity timer settings */ int iv_inact_init; /* setting for new station */ int iv_inact_auth; /* auth but not assoc setting */ int iv_inact_run; /* authorized setting */ int iv_inact_probe; /* inactive probe time */ int iv_des_nssid; /* # desired ssids */ struct ieee80211_scan_ssid iv_des_ssid[1];/* desired ssid table */ uint8_t iv_des_bssid[IEEE80211_ADDR_LEN]; struct ieee80211_channel *iv_des_chan; /* desired channel */ uint16_t iv_des_mode; /* desired mode */ int iv_nicknamelen; /* XXX junk */ uint8_t iv_nickname[IEEE80211_NWID_LEN]; u_int iv_bgscanidle; /* bg scan idle threshold */ u_int iv_bgscanintvl; /* bg scan min interval */ u_int iv_scanvalid; /* scan cache valid threshold */ u_int iv_scanreq_duration; u_int iv_scanreq_mindwell; u_int iv_scanreq_maxdwell; uint16_t iv_scanreq_flags;/* held scan request params */ uint8_t iv_scanreq_nssid; struct ieee80211_scan_ssid iv_scanreq_ssid[IEEE80211_SCAN_MAX_SSID]; /* sta-mode roaming state */ enum ieee80211_roamingmode iv_roaming; /* roaming mode */ struct ieee80211_roamparam iv_roamparms[IEEE80211_MODE_MAX]; uint8_t iv_bmissthreshold; uint8_t iv_bmiss_count; /* current beacon miss count */ int iv_bmiss_max; /* max bmiss before scan */ uint16_t iv_swbmiss_count;/* beacons in last period */ uint16_t iv_swbmiss_period;/* s/w bmiss period */ struct callout iv_swbmiss; /* s/w beacon miss timer */ int iv_ampdu_rxmax; /* A-MPDU rx limit (bytes) */ int iv_ampdu_density;/* A-MPDU density */ int iv_ampdu_limit; /* A-MPDU tx limit (bytes) */ int iv_amsdu_limit; /* A-MSDU tx limit (bytes) */ u_int iv_ampdu_mintraffic[WME_NUM_AC]; struct ieee80211_beacon_offsets iv_bcn_off; uint32_t *iv_aid_bitmap; /* association id map */ uint16_t iv_max_aid; uint16_t iv_sta_assoc; /* stations associated */ uint16_t iv_ps_sta; /* stations in power save */ uint16_t iv_ps_pending; /* ps sta's w/ pending frames */ uint16_t iv_txseq; /* mcast xmit seq# space */ uint16_t iv_tim_len; /* ic_tim_bitmap size (bytes) */ uint8_t *iv_tim_bitmap; /* power-save stations w/ data*/ uint8_t iv_dtim_period; /* DTIM period */ uint8_t iv_dtim_count; /* DTIM count from last bcn */ /* set/unset aid pwrsav state */ uint8_t iv_quiet; /* Quiet Element */ uint8_t iv_quiet_count; /* constant count for Quiet Element */ uint8_t iv_quiet_count_value; /* variable count for Quiet Element */ uint8_t iv_quiet_period; /* period for Quiet Element */ uint16_t iv_quiet_duration; /* duration for Quiet Element */ uint16_t iv_quiet_offset; /* offset for Quiet Element */ int iv_csa_count; /* count for doing CSA */ struct ieee80211_node *iv_bss; /* information for this node */ struct ieee80211_txparam iv_txparms[IEEE80211_MODE_MAX]; uint16_t iv_rtsthreshold; uint16_t iv_fragthreshold; int iv_inact_timer; /* inactivity timer wait */ /* application-specified IE's to attach to mgt frames */ struct ieee80211_appie *iv_appie_beacon; struct ieee80211_appie *iv_appie_probereq; struct ieee80211_appie *iv_appie_proberesp; struct ieee80211_appie *iv_appie_assocreq; struct ieee80211_appie *iv_appie_assocresp; struct ieee80211_appie *iv_appie_wpa; uint8_t *iv_wpa_ie; uint8_t *iv_rsn_ie; uint16_t iv_max_keyix; /* max h/w key index */ ieee80211_keyix iv_def_txkey; /* default/group tx key index */ struct ieee80211_key iv_nw_keys[IEEE80211_WEP_NKID]; int (*iv_key_alloc)(struct ieee80211vap *, struct ieee80211_key *, ieee80211_keyix *, ieee80211_keyix *); int (*iv_key_delete)(struct ieee80211vap *, const struct ieee80211_key *); int (*iv_key_set)(struct ieee80211vap *, const struct ieee80211_key *); void (*iv_key_update_begin)(struct ieee80211vap *); void (*iv_key_update_end)(struct ieee80211vap *); const struct ieee80211_authenticator *iv_auth; /* authenticator glue */ void *iv_ec; /* private auth state */ const struct ieee80211_aclator *iv_acl; /* acl glue */ void *iv_as; /* private aclator state */ const struct ieee80211_ratectl *iv_rate; void *iv_rs; /* private ratectl state */ struct ieee80211_tdma_state *iv_tdma; /* tdma state */ struct ieee80211_mesh_state *iv_mesh; /* MBSS state */ struct ieee80211_hwmp_state *iv_hwmp; /* HWMP state */ /* operate-mode detach hook */ void (*iv_opdetach)(struct ieee80211vap *); /* receive processing */ int (*iv_input)(struct ieee80211_node *, struct mbuf *, const struct ieee80211_rx_stats *, int, int); void (*iv_recv_mgmt)(struct ieee80211_node *, struct mbuf *, int, const struct ieee80211_rx_stats *, int, int); void (*iv_recv_ctl)(struct ieee80211_node *, struct mbuf *, int); void (*iv_deliver_data)(struct ieee80211vap *, struct ieee80211_node *, struct mbuf *); #if 0 /* send processing */ int (*iv_send_mgmt)(struct ieee80211_node *, int, int); #endif /* beacon miss processing */ void (*iv_bmiss)(struct ieee80211vap *); /* reset device state after 802.11 parameter/state change */ int (*iv_reset)(struct ieee80211vap *, u_long); /* [schedule] beacon frame update */ void (*iv_update_beacon)(struct ieee80211vap *, int); /* power save handling */ void (*iv_update_ps)(struct ieee80211vap *, int); int (*iv_set_tim)(struct ieee80211_node *, int); void (*iv_node_ps)(struct ieee80211_node *, int); void (*iv_sta_ps)(struct ieee80211vap *, int); void (*iv_recv_pspoll)(struct ieee80211_node *, struct mbuf *); /* state machine processing */ int (*iv_newstate)(struct ieee80211vap *, enum ieee80211_state, int); /* 802.3 output method for raw frame xmit */ int (*iv_output)(struct ifnet *, struct mbuf *, const struct sockaddr *, struct route *); uint64_t iv_spare[6]; }; MALLOC_DECLARE(M_80211_VAP); #define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0) #define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN) /* ic_flags/iv_flags */ #define IEEE80211_F_TURBOP 0x00000001 /* CONF: ATH Turbo enabled*/ #define IEEE80211_F_COMP 0x00000002 /* CONF: ATH comp enabled */ #define IEEE80211_F_FF 0x00000004 /* CONF: ATH FF enabled */ #define IEEE80211_F_BURST 0x00000008 /* CONF: bursting enabled */ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */ #define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */ #define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */ #define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */ #define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */ #define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */ #define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/ #define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */ #define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */ #define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */ #define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/ #define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */ #define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */ #define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */ #define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */ #define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */ #define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */ #define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/ #define IEEE80211_F_CSAPENDING 0x00400000 /* STATUS: chan switch pending*/ #define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */ #define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */ #define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */ #define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */ #define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */ #define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */ #define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */ #define IEEE80211_F_PCF 0x20000000 /* CONF: PCF enabled */ #define IEEE80211_F_DOTH 0x40000000 /* CONF: 11h enabled */ #define IEEE80211_F_DWDS 0x80000000 /* CONF: Dynamic WDS enabled */ #define IEEE80211_F_BITS \ "\20\1TURBOP\2COMP\3FF\4BURST\5PRIVACY\6PUREG\10SCAN\11ASCAN\12SIBSS" \ "\13SHSLOT\14PMGTON\15DESBSSID\16WME\17BGSCAN\20SWRETRY\21TXPOW_FIXED" \ "\22IBSSON\23SHPREAMBLE\24DATAPAD\25USEPROT\26USERBARKER\27CSAPENDING" \ "\30WPA1\31WPA2\32DROPUNENC\33COUNTERM\34HIDESSID\35NOBRIDG\36PCF" \ "\37DOTH\40DWDS" /* Atheros protocol-specific flags */ #define IEEE80211_F_ATHEROS \ (IEEE80211_F_FF | IEEE80211_F_COMP | IEEE80211_F_TURBOP) /* Check if an Atheros capability was negotiated for use */ #define IEEE80211_ATH_CAP(vap, ni, bit) \ ((vap)->iv_flags & (ni)->ni_ath_flags & (bit)) /* ic_flags_ext/iv_flags_ext */ #define IEEE80211_FEXT_INACT 0x00000002 /* CONF: sta inact handling */ #define IEEE80211_FEXT_SCANWAIT 0x00000004 /* STATUS: awaiting scan */ /* 0x00000006 reserved */ #define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: complete bgscan */ #define IEEE80211_FEXT_WPS 0x00000010 /* CONF: WPS enabled */ #define IEEE80211_FEXT_TSN 0x00000020 /* CONF: TSN enabled */ #define IEEE80211_FEXT_SCANREQ 0x00000040 /* STATUS: scan req params */ #define IEEE80211_FEXT_RESUME 0x00000080 /* STATUS: start on resume */ #define IEEE80211_FEXT_4ADDR 0x00000100 /* CONF: apply 4-addr encap */ #define IEEE80211_FEXT_NONERP_PR 0x00000200 /* STATUS: non-ERP sta present*/ #define IEEE80211_FEXT_SWBMISS 0x00000400 /* CONF: do bmiss in s/w */ #define IEEE80211_FEXT_DFS 0x00000800 /* CONF: DFS enabled */ #define IEEE80211_FEXT_DOTD 0x00001000 /* CONF: 11d enabled */ #define IEEE80211_FEXT_STATEWAIT 0x00002000 /* STATUS: awaiting state chg */ #define IEEE80211_FEXT_REINIT 0x00004000 /* STATUS: INIT state first */ #define IEEE80211_FEXT_BPF 0x00008000 /* STATUS: BPF tap present */ /* NB: immutable: should be set only when creating a vap */ #define IEEE80211_FEXT_WDSLEGACY 0x00010000 /* CONF: legacy WDS operation */ #define IEEE80211_FEXT_PROBECHAN 0x00020000 /* CONF: probe passive channel*/ #define IEEE80211_FEXT_UNIQMAC 0x00040000 /* CONF: user or computed mac */ #define IEEE80211_FEXT_BITS \ "\20\2INACT\3SCANWAIT\4BGSCAN\5WPS\6TSN\7SCANREQ\10RESUME" \ "\0114ADDR\12NONEPR_PR\13SWBMISS\14DFS\15DOTD\16STATEWAIT\17REINIT" \ "\20BPF\21WDSLEGACY\22PROBECHAN\23UNIQMAC" /* ic_flags_ht/iv_flags_ht */ #define IEEE80211_FHT_NONHT_PR 0x00000001 /* STATUS: non-HT sta present */ #define IEEE80211_FHT_GF 0x00040000 /* CONF: Greenfield enabled */ #define IEEE80211_FHT_HT 0x00080000 /* CONF: HT supported */ #define IEEE80211_FHT_AMPDU_TX 0x00100000 /* CONF: A-MPDU tx supported */ #define IEEE80211_FHT_AMPDU_RX 0x00200000 /* CONF: A-MPDU rx supported */ #define IEEE80211_FHT_AMSDU_TX 0x00400000 /* CONF: A-MSDU tx supported */ #define IEEE80211_FHT_AMSDU_RX 0x00800000 /* CONF: A-MSDU rx supported */ #define IEEE80211_FHT_USEHT40 0x01000000 /* CONF: 20/40 use enabled */ #define IEEE80211_FHT_PUREN 0x02000000 /* CONF: 11n w/o legacy sta's */ #define IEEE80211_FHT_SHORTGI20 0x04000000 /* CONF: short GI in HT20 */ #define IEEE80211_FHT_SHORTGI40 0x08000000 /* CONF: short GI in HT40 */ #define IEEE80211_FHT_HTCOMPAT 0x10000000 /* CONF: HT vendor OUI's */ #define IEEE80211_FHT_RIFS 0x20000000 /* CONF: RIFS enabled */ #define IEEE80211_FHT_STBC_TX 0x40000000 /* CONF: STBC tx enabled */ #define IEEE80211_FHT_STBC_RX 0x80000000 /* CONF: STBC rx enabled */ #define IEEE80211_FHT_BITS \ "\20\1NONHT_PR" \ "\23GF\24HT\25AMPDU_TX\26AMPDU_TX" \ "\27AMSDU_TX\30AMSDU_RX\31USEHT40\32PUREN\33SHORTGI20\34SHORTGI40" \ "\35HTCOMPAT\36RIFS\37STBC_TX\40STBC_RX" #define IEEE80211_FVEN_BITS "\20" /* ic_caps/iv_caps: device driver capabilities */ /* 0x2e available */ #define IEEE80211_C_STA 0x00000001 /* CAPABILITY: STA available */ #define IEEE80211_C_8023ENCAP 0x00000002 /* CAPABILITY: 802.3 encap */ #define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */ #define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/ #define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */ #define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */ #define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */ #define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */ #define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */ #define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */ #define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */ #define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */ #define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */ #define IEEE80211_C_DFS 0x00020000 /* CAPABILITY: DFS/radar avail*/ #define IEEE80211_C_MBSS 0x00040000 /* CAPABILITY: MBSS available */ #define IEEE80211_C_SWSLEEP 0x00080000 /* CAPABILITY: do sleep here */ /* 0x7c0000 available */ #define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */ #define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */ #define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/ #define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */ #define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */ #define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */ /* 0x10000000 reserved */ #define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */ #define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */ #define IEEE80211_C_TDMA 0x80000000 /* CAPABILITY: TDMA avail */ /* XXX protection/barker? */ #define IEEE80211_C_OPMODE \ (IEEE80211_C_STA | IEEE80211_C_IBSS | IEEE80211_C_HOSTAP | \ IEEE80211_C_AHDEMO | IEEE80211_C_MONITOR | IEEE80211_C_WDS | \ IEEE80211_C_TDMA | IEEE80211_C_MBSS) #define IEEE80211_C_BITS \ "\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \ "\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \ "\21MONITOR\22DFS\23MBSS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \ "\37TXFRAG\40TDMA" /* * ic_htcaps/iv_htcaps: HT-specific device/driver capabilities * * NB: the low 16-bits are the 802.11 definitions, the upper * 16-bits are used to define s/w/driver capabilities. */ #define IEEE80211_HTC_AMPDU 0x00010000 /* CAPABILITY: A-MPDU tx */ #define IEEE80211_HTC_AMSDU 0x00020000 /* CAPABILITY: A-MSDU tx */ /* NB: HT40 is implied by IEEE80211_HTCAP_CHWIDTH40 */ #define IEEE80211_HTC_HT 0x00040000 /* CAPABILITY: HT operation */ #define IEEE80211_HTC_SMPS 0x00080000 /* CAPABILITY: MIMO power save*/ #define IEEE80211_HTC_RIFS 0x00100000 /* CAPABILITY: RIFS support */ #define IEEE80211_HTC_RXUNEQUAL 0x00200000 /* CAPABILITY: RX unequal MCS */ #define IEEE80211_HTC_RXMCS32 0x00400000 /* CAPABILITY: MCS32 support */ #define IEEE80211_HTC_TXUNEQUAL 0x00800000 /* CAPABILITY: TX unequal MCS */ #define IEEE80211_HTC_TXMCS32 0x01000000 /* CAPABILITY: MCS32 suport */ #define IEEE80211_C_HTCAP_BITS \ "\20\1LDPC\2CHWIDTH40\5GREENFIELD\6SHORTGI20\7SHORTGI40\10TXSTBC" \ "\21AMPDU\22AMSDU\23HT\24SMPS\25RIFS" int ic_printf(struct ieee80211com *, const char *, ...) __printflike(2, 3); void ieee80211_ifattach(struct ieee80211com *); void ieee80211_ifdetach(struct ieee80211com *); int ieee80211_vap_setup(struct ieee80211com *, struct ieee80211vap *, const char name[IFNAMSIZ], int unit, enum ieee80211_opmode opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN]); int ieee80211_vap_attach(struct ieee80211vap *, ifm_change_cb_t, ifm_stat_cb_t, const uint8_t macaddr[IEEE80211_ADDR_LEN]); void ieee80211_vap_detach(struct ieee80211vap *); const struct ieee80211_rateset *ieee80211_get_suprates(struct ieee80211com *ic, const struct ieee80211_channel *); void ieee80211_announce(struct ieee80211com *); void ieee80211_announce_channels(struct ieee80211com *); void ieee80211_drain(struct ieee80211com *); void ieee80211_chan_init(struct ieee80211com *); struct ieee80211com *ieee80211_find_vap(const uint8_t mac[IEEE80211_ADDR_LEN]); struct ieee80211com *ieee80211_find_com(const char *name); int ieee80211_media_change(struct ifnet *); void ieee80211_media_status(struct ifnet *, struct ifmediareq *); int ieee80211_ioctl(struct ifnet *, u_long, caddr_t); int ieee80211_rate2media(struct ieee80211com *, int, enum ieee80211_phymode); int ieee80211_media2rate(int); int ieee80211_mhz2ieee(u_int, u_int); int ieee80211_chan2ieee(struct ieee80211com *, const struct ieee80211_channel *); u_int ieee80211_ieee2mhz(u_int, u_int); struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *, int freq, int flags); struct ieee80211_channel *ieee80211_find_channel_byieee(struct ieee80211com *, int ieee, int flags); struct ieee80211_channel *ieee80211_lookup_channel_rxstatus(struct ieee80211vap *, const struct ieee80211_rx_stats *); int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode); enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *); uint32_t ieee80211_mac_hash(const struct ieee80211com *, const uint8_t addr[IEEE80211_ADDR_LEN]); char ieee80211_channel_type_char(const struct ieee80211_channel *c); void ieee80211_radiotap_attach(struct ieee80211com *, struct ieee80211_radiotap_header *th, int tlen, uint32_t tx_radiotap, struct ieee80211_radiotap_header *rh, int rlen, uint32_t rx_radiotap); void ieee80211_radiotap_attachv(struct ieee80211com *, struct ieee80211_radiotap_header *th, int tlen, int n_tx_v, uint32_t tx_radiotap, struct ieee80211_radiotap_header *rh, int rlen, int n_rx_v, uint32_t rx_radiotap); void ieee80211_radiotap_detach(struct ieee80211com *); void ieee80211_radiotap_vattach(struct ieee80211vap *); void ieee80211_radiotap_vdetach(struct ieee80211vap *); void ieee80211_radiotap_chan_change(struct ieee80211com *); void ieee80211_radiotap_tx(struct ieee80211vap *, struct mbuf *); void ieee80211_radiotap_rx(struct ieee80211vap *, struct mbuf *); void ieee80211_radiotap_rx_all(struct ieee80211com *, struct mbuf *); static __inline int ieee80211_radiotap_active(const struct ieee80211com *ic) { return (ic->ic_flags_ext & IEEE80211_FEXT_BPF) != 0; } static __inline int ieee80211_radiotap_active_vap(const struct ieee80211vap *vap) { return (vap->iv_flags_ext & IEEE80211_FEXT_BPF) || vap->iv_ic->ic_montaps != 0; } /* * Enqueue a task on the state thread. */ static __inline void ieee80211_runtask(struct ieee80211com *ic, struct task *task) { taskqueue_enqueue(ic->ic_tq, task); } /* * Wait for a queued task to complete. */ static __inline void ieee80211_draintask(struct ieee80211com *ic, struct task *task) { taskqueue_drain(ic->ic_tq, task); } /* * Key update synchronization methods. XXX should not be visible. */ static __inline void ieee80211_key_update_begin(struct ieee80211vap *vap) { vap->iv_key_update_begin(vap); } static __inline void ieee80211_key_update_end(struct ieee80211vap *vap) { vap->iv_key_update_end(vap); } /* * XXX these need to be here for IEEE80211_F_DATAPAD */ /* * Return the space occupied by the 802.11 header and any * padding required by the driver. This works for a * management or data frame. */ static __inline int ieee80211_hdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_hdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(uint32_t)); return size; } /* * Like ieee80211_hdrspace, but handles any type of frame. */ static __inline int ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_anyhdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(uint32_t)); return size; } /* * Notify a vap that beacon state has been updated. */ static __inline void ieee80211_beacon_notify(struct ieee80211vap *vap, int what) { if (vap->iv_state == IEEE80211_S_RUN) vap->iv_update_beacon(vap, what); } /* * Calculate HT channel promotion flags for a channel. * XXX belongs in ieee80211_ht.h but needs IEEE80211_FHT_* */ static __inline int ieee80211_htchanflags(const struct ieee80211_channel *c) { return IEEE80211_IS_CHAN_HT40(c) ? IEEE80211_FHT_HT | IEEE80211_FHT_USEHT40 : IEEE80211_IS_CHAN_HT(c) ? IEEE80211_FHT_HT : 0; } /* * Fetch the current TX power (cap) for the given node. * * This includes the node and ic/vap TX power limit as needed, * but it doesn't take into account any per-rate limit. */ static __inline uint16_t ieee80211_get_node_txpower(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; uint16_t txpower; txpower = ni->ni_txpower; txpower = MIN(txpower, ic->ic_txpowlimit); if (ic->ic_curchan != NULL) { txpower = MIN(txpower, 2 * ic->ic_curchan->ic_maxregpower); txpower = MIN(txpower, ic->ic_curchan->ic_maxpower); } return (txpower); } /* * Debugging facilities compiled in when IEEE80211_DEBUG is defined. * * The intent is that any problem in the net80211 layer can be * diagnosed by inspecting the statistics (dumped by the wlanstats * program) and/or the msgs generated by net80211. Messages are * broken into functional classes and can be controlled with the * wlandebug program. Certain of these msg groups are for facilities * that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1XSM). */ #define IEEE80211_MSG_11N 0x80000000 /* 11n mode debug */ #define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */ #define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */ #define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */ #define IEEE80211_MSG_INPUT 0x08000000 /* input handling */ #define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */ #define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */ #define IEEE80211_MSG_NODE 0x01000000 /* node handling */ #define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */ #define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */ #define IEEE80211_MSG_SCAN 0x00200000 /* scanning */ #define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */ #define IEEE80211_MSG_STATE 0x00080000 /* state machine */ #define IEEE80211_MSG_POWER 0x00040000 /* power save handling */ #define IEEE80211_MSG_HWMP 0x00020000 /* hybrid mesh protocol */ #define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */ #define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */ #define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */ #define IEEE80211_MSG_MESH 0x00002000 /* mesh networking */ #define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */ #define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */ #define IEEE80211_MSG_WME 0x00000400 /* WME protocol */ #define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */ #define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */ #define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */ #define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */ #define IEEE80211_MSG_RATECTL 0x00000020 /* tx rate control */ #define IEEE80211_MSG_ACTION 0x00000010 /* action frame handling */ #define IEEE80211_MSG_WDS 0x00000008 /* WDS handling */ #define IEEE80211_MSG_IOCTL 0x00000004 /* ioctl handling */ #define IEEE80211_MSG_TDMA 0x00000002 /* TDMA handling */ #define IEEE80211_MSG_ANY 0xffffffff /* anything */ #define IEEE80211_MSG_BITS \ "\20\2TDMA\3IOCTL\4WDS\5ACTION\6RATECTL\7ROAM\10INACT\11DOTH\12SUPERG" \ "\13WME\14ACL\15WPA\16RADKEYS\17RADDUMP\20RADIUS\21DOT1XSM\22HWMP" \ "\23POWER\24STATE\25OUTPUT\26SCAN\27AUTH\30ASSOC\31NODE\32ELEMID" \ "\33XRATE\34INPUT\35CRYPTO\36DUPMPKTS\37DEBUG\04011N" #ifdef IEEE80211_DEBUG #define ieee80211_msg(_vap, _m) ((_vap)->iv_debug & (_m)) #define IEEE80211_DPRINTF(_vap, _m, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note(_vap, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_mac(_vap, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_mac(_vap, _mac, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_frame(_vap, _wh, _fmt, __VA_ARGS__); \ } while (0) void ieee80211_note(const struct ieee80211vap *, const char *, ...); void ieee80211_note_mac(const struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], const char *, ...); void ieee80211_note_frame(const struct ieee80211vap *, const struct ieee80211_frame *, const char *, ...); #define ieee80211_msg_debug(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_DEBUG) #define ieee80211_msg_dumppkts(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_DUMPPKTS) #define ieee80211_msg_input(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_INPUT) #define ieee80211_msg_radius(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADIUS) #define ieee80211_msg_dumpradius(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADDUMP) #define ieee80211_msg_dumpradkeys(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADKEYS) #define ieee80211_msg_scan(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_SCAN) #define ieee80211_msg_assoc(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_ASSOC) /* * Emit a debug message about discarding a frame or information * element. One format is for extracting the mac address from * the frame header; the other is for when a header is not * available or otherwise appropriate. */ #define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_frame(_vap, _wh, _type, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_ie(_vap, _wh, _type, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_mac(_vap, _mac, _type, _fmt, __VA_ARGS__);\ } while (0) void ieee80211_discard_frame(const struct ieee80211vap *, const struct ieee80211_frame *, const char *type, const char *fmt, ...); void ieee80211_discard_ie(const struct ieee80211vap *, const struct ieee80211_frame *, const char *type, const char *fmt, ...); void ieee80211_discard_mac(const struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], const char *type, const char *fmt, ...); #else #define IEEE80211_DPRINTF(_vap, _m, _fmt, ...) #define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) #define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) #define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) #define ieee80211_msg_dumppkts(_vap) 0 #define ieee80211_msg(_vap, _m) 0 #define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) #define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) #define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) #endif #endif /* _NET80211_IEEE80211_VAR_H_ */ Index: projects/clang380-import/sys/netinet/if_ether.c =================================================================== --- projects/clang380-import/sys/netinet/if_ether.c (revision 293035) +++ projects/clang380-import/sys/netinet/if_ether.c (revision 293036) @@ -1,1341 +1,1338 @@ /*- * Copyright (c) 1982, 1986, 1988, 1993 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)if_ether.c 8.1 (Berkeley) 6/10/93 */ /* * Ethernet address resolution protocol. * TODO: * add "inuse/lock" bit (or ref. count) along with valid bit */ #include __FBSDID("$FreeBSD$"); #include "opt_inet.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef INET #include #endif #include #define SIN(s) ((const struct sockaddr_in *)(s)) static struct timeval arp_lastlog; static int arp_curpps; static int arp_maxpps = 1; /* Simple ARP state machine */ enum arp_llinfo_state { ARP_LLINFO_INCOMPLETE = 0, /* No LLE data */ ARP_LLINFO_REACHABLE, /* LLE is valid */ ARP_LLINFO_VERIFY, /* LLE is valid, need refresh */ ARP_LLINFO_DELETED, /* LLE is deleted */ }; SYSCTL_DECL(_net_link_ether); static SYSCTL_NODE(_net_link_ether, PF_INET, inet, CTLFLAG_RW, 0, ""); static SYSCTL_NODE(_net_link_ether, PF_ARP, arp, CTLFLAG_RW, 0, ""); /* timer values */ static VNET_DEFINE(int, arpt_keep) = (20*60); /* once resolved, good for 20 * minutes */ static VNET_DEFINE(int, arp_maxtries) = 5; static VNET_DEFINE(int, arp_proxyall) = 0; static VNET_DEFINE(int, arpt_down) = 20; /* keep incomplete entries for * 20 seconds */ static VNET_DEFINE(int, arpt_rexmit) = 1; /* retransmit arp entries, sec*/ VNET_PCPUSTAT_DEFINE(struct arpstat, arpstat); /* ARP statistics, see if_arp.h */ VNET_PCPUSTAT_SYSINIT(arpstat); #ifdef VIMAGE VNET_PCPUSTAT_SYSUNINIT(arpstat); #endif /* VIMAGE */ static VNET_DEFINE(int, arp_maxhold) = 1; #define V_arpt_keep VNET(arpt_keep) #define V_arpt_down VNET(arpt_down) #define V_arpt_rexmit VNET(arpt_rexmit) #define V_arp_maxtries VNET(arp_maxtries) #define V_arp_proxyall VNET(arp_proxyall) #define V_arp_maxhold VNET(arp_maxhold) SYSCTL_INT(_net_link_ether_inet, OID_AUTO, max_age, CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(arpt_keep), 0, "ARP entry lifetime in seconds"); SYSCTL_INT(_net_link_ether_inet, OID_AUTO, maxtries, CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(arp_maxtries), 0, "ARP resolution attempts before returning error"); SYSCTL_INT(_net_link_ether_inet, OID_AUTO, proxyall, CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(arp_proxyall), 0, "Enable proxy ARP for all suitable requests"); SYSCTL_INT(_net_link_ether_inet, OID_AUTO, wait, CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(arpt_down), 0, "Incomplete ARP entry lifetime in seconds"); SYSCTL_VNET_PCPUSTAT(_net_link_ether_arp, OID_AUTO, stats, struct arpstat, arpstat, "ARP statistics (struct arpstat, net/if_arp.h)"); SYSCTL_INT(_net_link_ether_inet, OID_AUTO, maxhold, CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(arp_maxhold), 0, "Number of packets to hold per ARP entry"); SYSCTL_INT(_net_link_ether_inet, OID_AUTO, max_log_per_second, CTLFLAG_RW, &arp_maxpps, 0, "Maximum number of remotely triggered ARP messages that can be " "logged per second"); #define ARP_LOG(pri, ...) do { \ if (ppsratecheck(&arp_lastlog, &arp_curpps, arp_maxpps)) \ log((pri), "arp: " __VA_ARGS__); \ } while (0) static void arp_init(void); static void arpintr(struct mbuf *); static void arptimer(void *); #ifdef INET static void in_arpinput(struct mbuf *); #endif static void arp_check_update_lle(struct arphdr *ah, struct in_addr isaddr, struct ifnet *ifp, int bridged, struct llentry *la); static void arp_mark_lle_reachable(struct llentry *la); static void arp_iflladdr(void *arg __unused, struct ifnet *ifp); static eventhandler_tag iflladdr_tag; static const struct netisr_handler arp_nh = { .nh_name = "arp", .nh_handler = arpintr, .nh_proto = NETISR_ARP, .nh_policy = NETISR_POLICY_SOURCE, }; /* * Timeout routine. Age arp_tab entries periodically. */ static void arptimer(void *arg) { struct llentry *lle = (struct llentry *)arg; struct ifnet *ifp; int r_skip_req; if (lle->la_flags & LLE_STATIC) { return; } LLE_WLOCK(lle); if (callout_pending(&lle->lle_timer)) { /* * Here we are a bit odd here in the treatment of * active/pending. If the pending bit is set, it got * rescheduled before I ran. The active * bit we ignore, since if it was stopped * in ll_tablefree() and was currently running * it would have return 0 so the code would * not have deleted it since the callout could * not be stopped so we want to go through * with the delete here now. If the callout * was restarted, the pending bit will be back on and * we just want to bail since the callout_reset would * return 1 and our reference would have been removed * by arpresolve() below. */ LLE_WUNLOCK(lle); return; } ifp = lle->lle_tbl->llt_ifp; CURVNET_SET(ifp->if_vnet); switch (lle->ln_state) { case ARP_LLINFO_REACHABLE: /* * Expiration time is approaching. * Let's try to refresh entry if it is still * in use. * * Set r_skip_req to get feedback from * fast path. Change state and re-schedule * ourselves. */ LLE_REQ_LOCK(lle); lle->r_skip_req = 1; LLE_REQ_UNLOCK(lle); lle->ln_state = ARP_LLINFO_VERIFY; callout_schedule(&lle->lle_timer, hz * V_arpt_rexmit); LLE_WUNLOCK(lle); CURVNET_RESTORE(); return; case ARP_LLINFO_VERIFY: LLE_REQ_LOCK(lle); r_skip_req = lle->r_skip_req; LLE_REQ_UNLOCK(lle); if (r_skip_req == 0 && lle->la_preempt > 0) { /* Entry was used, issue refresh request */ struct in_addr dst; dst = lle->r_l3addr.addr4; lle->la_preempt--; callout_schedule(&lle->lle_timer, hz * V_arpt_rexmit); LLE_WUNLOCK(lle); arprequest(ifp, NULL, &dst, NULL); CURVNET_RESTORE(); return; } /* Nothing happened. Reschedule if not too late */ if (lle->la_expire > time_uptime) { callout_schedule(&lle->lle_timer, hz * V_arpt_rexmit); LLE_WUNLOCK(lle); CURVNET_RESTORE(); return; } break; case ARP_LLINFO_INCOMPLETE: case ARP_LLINFO_DELETED: break; } if ((lle->la_flags & LLE_DELETED) == 0) { int evt; if (lle->la_flags & LLE_VALID) evt = LLENTRY_EXPIRED; else evt = LLENTRY_TIMEDOUT; EVENTHANDLER_INVOKE(lle_event, lle, evt); } callout_stop(&lle->lle_timer); /* XXX: LOR avoidance. We still have ref on lle. */ LLE_WUNLOCK(lle); IF_AFDATA_LOCK(ifp); LLE_WLOCK(lle); /* Guard against race with other llentry_free(). */ if (lle->la_flags & LLE_LINKED) { LLE_REMREF(lle); lltable_unlink_entry(lle->lle_tbl, lle); } IF_AFDATA_UNLOCK(ifp); size_t pkts_dropped = llentry_free(lle); ARPSTAT_ADD(dropped, pkts_dropped); ARPSTAT_INC(timeouts); CURVNET_RESTORE(); } /* * Stores link-layer header for @ifp in format suitable for if_output() * into buffer @buf. Resulting header length is stored in @bufsize. * * Returns 0 on success. */ static int arp_fillheader(struct ifnet *ifp, struct arphdr *ah, int bcast, u_char *buf, size_t *bufsize) { struct if_encap_req ereq; int error; bzero(buf, *bufsize); bzero(&ereq, sizeof(ereq)); ereq.buf = buf; ereq.bufsize = *bufsize; ereq.rtype = IFENCAP_LL; ereq.family = AF_ARP; ereq.lladdr = ar_tha(ah); ereq.hdata = (u_char *)ah; if (bcast) ereq.flags = IFENCAP_FLAG_BROADCAST; error = ifp->if_requestencap(ifp, &ereq); if (error == 0) *bufsize = ereq.bufsize; return (error); } /* * Broadcast an ARP request. Caller specifies: * - arp header source ip address * - arp header target ip address * - arp header source ethernet address */ void arprequest(struct ifnet *ifp, const struct in_addr *sip, const struct in_addr *tip, u_char *enaddr) { struct mbuf *m; struct arphdr *ah; struct sockaddr sa; u_char *carpaddr = NULL; uint8_t linkhdr[LLE_MAX_LINKHDR]; size_t linkhdrsize; struct route ro; int error; if (sip == NULL) { /* * The caller did not supply a source address, try to find * a compatible one among those assigned to this interface. */ struct ifaddr *ifa; IF_ADDR_RLOCK(ifp); TAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) { if (ifa->ifa_addr->sa_family != AF_INET) continue; if (ifa->ifa_carp) { if ((*carp_iamatch_p)(ifa, &carpaddr) == 0) continue; sip = &IA_SIN(ifa)->sin_addr; } else { carpaddr = NULL; sip = &IA_SIN(ifa)->sin_addr; } if (0 == ((sip->s_addr ^ tip->s_addr) & IA_MASKSIN(ifa)->sin_addr.s_addr)) break; /* found it. */ } IF_ADDR_RUNLOCK(ifp); if (sip == NULL) { printf("%s: cannot find matching address\n", __func__); return; } } if (enaddr == NULL) enaddr = carpaddr ? carpaddr : (u_char *)IF_LLADDR(ifp); if ((m = m_gethdr(M_NOWAIT, MT_DATA)) == NULL) return; m->m_len = sizeof(*ah) + 2 * sizeof(struct in_addr) + 2 * ifp->if_addrlen; m->m_pkthdr.len = m->m_len; M_ALIGN(m, m->m_len); ah = mtod(m, struct arphdr *); bzero((caddr_t)ah, m->m_len); #ifdef MAC mac_netinet_arp_send(ifp, m); #endif ah->ar_pro = htons(ETHERTYPE_IP); ah->ar_hln = ifp->if_addrlen; /* hardware address length */ ah->ar_pln = sizeof(struct in_addr); /* protocol address length */ ah->ar_op = htons(ARPOP_REQUEST); bcopy(enaddr, ar_sha(ah), ah->ar_hln); bcopy(sip, ar_spa(ah), ah->ar_pln); bcopy(tip, ar_tpa(ah), ah->ar_pln); sa.sa_family = AF_ARP; sa.sa_len = 2; /* Calculate link header for sending frame */ bzero(&ro, sizeof(ro)); linkhdrsize = sizeof(linkhdr); error = arp_fillheader(ifp, ah, 1, linkhdr, &linkhdrsize); if (error != 0 && error != EAFNOSUPPORT) { ARP_LOG(LOG_ERR, "Failed to calculate ARP header on %s: %d\n", if_name(ifp), error); return; } ro.ro_prepend = linkhdr; ro.ro_plen = linkhdrsize; ro.ro_flags = 0; m->m_flags |= M_BCAST; m_clrprotoflags(m); /* Avoid confusing lower layers. */ (*ifp->if_output)(ifp, m, &sa, &ro); ARPSTAT_INC(txrequests); } /* * Resolve an IP address into an ethernet address - heavy version. * Used internally by arpresolve(). * We have already checked than we can't use existing lle without * modification so we have to acquire LLE_EXCLUSIVE lle lock. * * On success, desten and flags are filled in and the function returns 0; * If the packet must be held pending resolution, we return EWOULDBLOCK * On other errors, we return the corresponding error code. * Note that m_freem() handles NULL. */ static int arpresolve_full(struct ifnet *ifp, int is_gw, int flags, struct mbuf *m, const struct sockaddr *dst, u_char *desten, uint32_t *pflags) { struct llentry *la = NULL, *la_tmp; struct mbuf *curr = NULL; struct mbuf *next = NULL; int error, renew; char *lladdr; int ll_len; if (pflags != NULL) *pflags = 0; if ((flags & LLE_CREATE) == 0) { IF_AFDATA_RLOCK(ifp); la = lla_lookup(LLTABLE(ifp), LLE_EXCLUSIVE, dst); IF_AFDATA_RUNLOCK(ifp); } if (la == NULL && (ifp->if_flags & (IFF_NOARP | IFF_STATICARP)) == 0) { la = lltable_alloc_entry(LLTABLE(ifp), 0, dst); if (la == NULL) { log(LOG_DEBUG, "arpresolve: can't allocate llinfo for %s on %s\n", inet_ntoa(SIN(dst)->sin_addr), if_name(ifp)); m_freem(m); return (EINVAL); } IF_AFDATA_WLOCK(ifp); LLE_WLOCK(la); la_tmp = lla_lookup(LLTABLE(ifp), LLE_EXCLUSIVE, dst); /* Prefer ANY existing lle over newly-created one */ if (la_tmp == NULL) lltable_link_entry(LLTABLE(ifp), la); IF_AFDATA_WUNLOCK(ifp); if (la_tmp != NULL) { lltable_free_entry(LLTABLE(ifp), la); la = la_tmp; } } if (la == NULL) { m_freem(m); return (EINVAL); } if ((la->la_flags & LLE_VALID) && ((la->la_flags & LLE_STATIC) || la->la_expire > time_uptime)) { if (flags & LLE_ADDRONLY) { lladdr = la->ll_addr; ll_len = ifp->if_addrlen; } else { lladdr = la->r_linkdata; ll_len = la->r_hdrlen; } bcopy(lladdr, desten, ll_len); /* Check if we have feedback request from arptimer() */ if (la->r_skip_req != 0) { LLE_REQ_LOCK(la); la->r_skip_req = 0; /* Notify that entry was used */ LLE_REQ_UNLOCK(la); } if (pflags != NULL) *pflags = la->la_flags & (LLE_VALID|LLE_IFADDR); LLE_WUNLOCK(la); return (0); } renew = (la->la_asked == 0 || la->la_expire != time_uptime); /* * There is an arptab entry, but no ethernet address * response yet. Add the mbuf to the list, dropping * the oldest packet if we have exceeded the system * setting. */ if (m != NULL) { if (la->la_numheld >= V_arp_maxhold) { if (la->la_hold != NULL) { next = la->la_hold->m_nextpkt; m_freem(la->la_hold); la->la_hold = next; la->la_numheld--; ARPSTAT_INC(dropped); } } if (la->la_hold != NULL) { curr = la->la_hold; while (curr->m_nextpkt != NULL) curr = curr->m_nextpkt; curr->m_nextpkt = m; } else la->la_hold = m; la->la_numheld++; } /* * Return EWOULDBLOCK if we have tried less than arp_maxtries. It * will be masked by ether_output(). Return EHOSTDOWN/EHOSTUNREACH * if we have already sent arp_maxtries ARP requests. Retransmit the * ARP request, but not faster than one request per second. */ if (la->la_asked < V_arp_maxtries) error = EWOULDBLOCK; /* First request. */ else error = is_gw != 0 ? EHOSTUNREACH : EHOSTDOWN; if (renew) { int canceled; LLE_ADDREF(la); la->la_expire = time_uptime; canceled = callout_reset(&la->lle_timer, hz * V_arpt_down, arptimer, la); if (canceled) LLE_REMREF(la); la->la_asked++; LLE_WUNLOCK(la); arprequest(ifp, NULL, &SIN(dst)->sin_addr, NULL); return (error); } LLE_WUNLOCK(la); return (error); } /* * Resolve an IP address into an ethernet address. */ int arpresolve_addr(struct ifnet *ifp, int flags, const struct sockaddr *dst, char *desten, uint32_t *pflags) { int error; flags |= LLE_ADDRONLY; error = arpresolve_full(ifp, 0, flags, NULL, dst, desten, pflags); return (error); } /* * Lookups link header based on an IP address. * On input: * ifp is the interface we use * is_gw != 0 if @dst represents gateway to some destination * m is the mbuf. May be NULL if we don't have a packet. * dst is the next hop, * desten is the storage to put LL header. * flags returns subset of lle flags: LLE_VALID | LLE_IFADDR * * On success, full/partial link header and flags are filled in and * the function returns 0. * If the packet must be held pending resolution, we return EWOULDBLOCK * On other errors, we return the corresponding error code. * Note that m_freem() handles NULL. */ int arpresolve(struct ifnet *ifp, int is_gw, struct mbuf *m, const struct sockaddr *dst, u_char *desten, uint32_t *pflags) { struct llentry *la = 0; if (pflags != NULL) *pflags = 0; if (m != NULL) { if (m->m_flags & M_BCAST) { /* broadcast */ (void)memcpy(desten, ifp->if_broadcastaddr, ifp->if_addrlen); return (0); } if (m->m_flags & M_MCAST) { /* multicast */ ETHER_MAP_IP_MULTICAST(&SIN(dst)->sin_addr, desten); return (0); } } IF_AFDATA_RLOCK(ifp); la = lla_lookup(LLTABLE(ifp), LLE_UNLOCKED, dst); if (la != NULL && (la->r_flags & RLLE_VALID) != 0) { /* Entry found, let's copy lle info */ bcopy(la->r_linkdata, desten, la->r_hdrlen); if (pflags != NULL) *pflags = LLE_VALID | (la->r_flags & RLLE_IFADDR); /* Check if we have feedback request from arptimer() */ if (la->r_skip_req != 0) { LLE_REQ_LOCK(la); la->r_skip_req = 0; /* Notify that entry was used */ LLE_REQ_UNLOCK(la); } IF_AFDATA_RUNLOCK(ifp); return (0); } IF_AFDATA_RUNLOCK(ifp); return (arpresolve_full(ifp, is_gw, la == NULL ? LLE_CREATE : 0, m, dst, desten, pflags)); } /* * Common length and type checks are done here, * then the protocol-specific routine is called. */ static void arpintr(struct mbuf *m) { struct arphdr *ar; struct ifnet *ifp; char *layer; int hlen; ifp = m->m_pkthdr.rcvif; if (m->m_len < sizeof(struct arphdr) && ((m = m_pullup(m, sizeof(struct arphdr))) == NULL)) { ARP_LOG(LOG_NOTICE, "packet with short header received on %s\n", if_name(ifp)); return; } ar = mtod(m, struct arphdr *); /* Check if length is sufficient */ if (m->m_len < arphdr_len(ar)) { m = m_pullup(m, arphdr_len(ar)); if (m == NULL) { ARP_LOG(LOG_NOTICE, "short packet received on %s\n", if_name(ifp)); return; } ar = mtod(m, struct arphdr *); } hlen = 0; layer = ""; switch (ntohs(ar->ar_hrd)) { case ARPHRD_ETHER: hlen = ETHER_ADDR_LEN; /* RFC 826 */ layer = "ethernet"; break; case ARPHRD_IEEE802: hlen = 6; /* RFC 1390, FDDI_ADDR_LEN */ layer = "fddi"; break; case ARPHRD_ARCNET: hlen = 1; /* RFC 1201, ARC_ADDR_LEN */ layer = "arcnet"; break; case ARPHRD_INFINIBAND: hlen = 20; /* RFC 4391, INFINIBAND_ALEN */ layer = "infiniband"; break; case ARPHRD_IEEE1394: hlen = 0; /* SHALL be 16 */ /* RFC 2734 */ layer = "firewire"; /* * Restrict too long hardware addresses. * Currently we are capable of handling 20-byte * addresses ( sizeof(lle->ll_addr) ) */ if (ar->ar_hln >= 20) hlen = 16; break; default: ARP_LOG(LOG_NOTICE, "packet with unknown hardware format 0x%02d received on " "%s\n", ntohs(ar->ar_hrd), if_name(ifp)); m_freem(m); return; } if (hlen != 0 && hlen != ar->ar_hln) { ARP_LOG(LOG_NOTICE, "packet with invalid %s address length %d received on %s\n", layer, ar->ar_hln, if_name(ifp)); m_freem(m); return; } ARPSTAT_INC(received); switch (ntohs(ar->ar_pro)) { #ifdef INET case ETHERTYPE_IP: in_arpinput(m); return; #endif } m_freem(m); } #ifdef INET /* * ARP for Internet protocols on 10 Mb/s Ethernet. * Algorithm is that given in RFC 826. * In addition, a sanity check is performed on the sender * protocol address, to catch impersonators. * We no longer handle negotiations for use of trailer protocol: * Formerly, ARP replied for protocol type ETHERTYPE_TRAIL sent * along with IP replies if we wanted trailers sent to us, * and also sent them in response to IP replies. * This allowed either end to announce the desire to receive * trailer packets. * We no longer reply to requests for ETHERTYPE_TRAIL protocol either, * but formerly didn't normally send requests. */ static int log_arp_wrong_iface = 1; static int log_arp_movements = 1; static int log_arp_permanent_modify = 1; static int allow_multicast = 0; SYSCTL_INT(_net_link_ether_inet, OID_AUTO, log_arp_wrong_iface, CTLFLAG_RW, &log_arp_wrong_iface, 0, "log arp packets arriving on the wrong interface"); SYSCTL_INT(_net_link_ether_inet, OID_AUTO, log_arp_movements, CTLFLAG_RW, &log_arp_movements, 0, "log arp replies from MACs different than the one in the cache"); SYSCTL_INT(_net_link_ether_inet, OID_AUTO, log_arp_permanent_modify, CTLFLAG_RW, &log_arp_permanent_modify, 0, "log arp replies from MACs different than the one in the permanent arp entry"); SYSCTL_INT(_net_link_ether_inet, OID_AUTO, allow_multicast, CTLFLAG_RW, &allow_multicast, 0, "accept multicast addresses"); static void in_arpinput(struct mbuf *m) { struct rm_priotracker in_ifa_tracker; struct arphdr *ah; struct ifnet *ifp = m->m_pkthdr.rcvif; struct llentry *la = NULL, *la_tmp; struct ifaddr *ifa; struct in_ifaddr *ia; struct sockaddr sa; struct in_addr isaddr, itaddr, myaddr; u_int8_t *enaddr = NULL; int op; int bridged = 0, is_bridge = 0; int carped; struct sockaddr_in sin; struct sockaddr *dst; struct nhop4_basic nh4; uint8_t linkhdr[LLE_MAX_LINKHDR]; struct route ro; size_t linkhdrsize; int lladdr_off; int error; sin.sin_len = sizeof(struct sockaddr_in); sin.sin_family = AF_INET; sin.sin_addr.s_addr = 0; if (ifp->if_bridge) bridged = 1; if (ifp->if_type == IFT_BRIDGE) is_bridge = 1; /* * We already have checked that mbuf contains enough contiguous data * to hold entire arp message according to the arp header. */ ah = mtod(m, struct arphdr *); /* * ARP is only for IPv4 so we can reject packets with * a protocol length not equal to an IPv4 address. */ if (ah->ar_pln != sizeof(struct in_addr)) { ARP_LOG(LOG_NOTICE, "requested protocol length != %zu\n", sizeof(struct in_addr)); goto drop; } if (allow_multicast == 0 && ETHER_IS_MULTICAST(ar_sha(ah))) { ARP_LOG(LOG_NOTICE, "%*D is multicast\n", ifp->if_addrlen, (u_char *)ar_sha(ah), ":"); goto drop; } op = ntohs(ah->ar_op); (void)memcpy(&isaddr, ar_spa(ah), sizeof (isaddr)); (void)memcpy(&itaddr, ar_tpa(ah), sizeof (itaddr)); if (op == ARPOP_REPLY) ARPSTAT_INC(rxreplies); /* * For a bridge, we want to check the address irrespective * of the receive interface. (This will change slightly * when we have clusters of interfaces). */ IN_IFADDR_RLOCK(&in_ifa_tracker); LIST_FOREACH(ia, INADDR_HASH(itaddr.s_addr), ia_hash) { if (((bridged && ia->ia_ifp->if_bridge == ifp->if_bridge) || ia->ia_ifp == ifp) && itaddr.s_addr == ia->ia_addr.sin_addr.s_addr && (ia->ia_ifa.ifa_carp == NULL || (*carp_iamatch_p)(&ia->ia_ifa, &enaddr))) { ifa_ref(&ia->ia_ifa); IN_IFADDR_RUNLOCK(&in_ifa_tracker); goto match; } } LIST_FOREACH(ia, INADDR_HASH(isaddr.s_addr), ia_hash) if (((bridged && ia->ia_ifp->if_bridge == ifp->if_bridge) || ia->ia_ifp == ifp) && isaddr.s_addr == ia->ia_addr.sin_addr.s_addr) { ifa_ref(&ia->ia_ifa); IN_IFADDR_RUNLOCK(&in_ifa_tracker); goto match; } #define BDG_MEMBER_MATCHES_ARP(addr, ifp, ia) \ (ia->ia_ifp->if_bridge == ifp->if_softc && \ !bcmp(IF_LLADDR(ia->ia_ifp), IF_LLADDR(ifp), ifp->if_addrlen) && \ addr == ia->ia_addr.sin_addr.s_addr) /* * Check the case when bridge shares its MAC address with * some of its children, so packets are claimed by bridge * itself (bridge_input() does it first), but they are really * meant to be destined to the bridge member. */ if (is_bridge) { LIST_FOREACH(ia, INADDR_HASH(itaddr.s_addr), ia_hash) { if (BDG_MEMBER_MATCHES_ARP(itaddr.s_addr, ifp, ia)) { ifa_ref(&ia->ia_ifa); ifp = ia->ia_ifp; IN_IFADDR_RUNLOCK(&in_ifa_tracker); goto match; } } } #undef BDG_MEMBER_MATCHES_ARP IN_IFADDR_RUNLOCK(&in_ifa_tracker); /* * No match, use the first inet address on the receive interface * as a dummy address for the rest of the function. */ IF_ADDR_RLOCK(ifp); TAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) if (ifa->ifa_addr->sa_family == AF_INET && (ifa->ifa_carp == NULL || (*carp_iamatch_p)(ifa, &enaddr))) { ia = ifatoia(ifa); ifa_ref(ifa); IF_ADDR_RUNLOCK(ifp); goto match; } IF_ADDR_RUNLOCK(ifp); /* * If bridging, fall back to using any inet address. */ IN_IFADDR_RLOCK(&in_ifa_tracker); if (!bridged || (ia = TAILQ_FIRST(&V_in_ifaddrhead)) == NULL) { IN_IFADDR_RUNLOCK(&in_ifa_tracker); goto drop; } ifa_ref(&ia->ia_ifa); IN_IFADDR_RUNLOCK(&in_ifa_tracker); match: if (!enaddr) enaddr = (u_int8_t *)IF_LLADDR(ifp); carped = (ia->ia_ifa.ifa_carp != NULL); myaddr = ia->ia_addr.sin_addr; ifa_free(&ia->ia_ifa); if (!bcmp(ar_sha(ah), enaddr, ifp->if_addrlen)) goto drop; /* it's from me, ignore it. */ if (!bcmp(ar_sha(ah), ifp->if_broadcastaddr, ifp->if_addrlen)) { ARP_LOG(LOG_NOTICE, "link address is broadcast for IP address " "%s!\n", inet_ntoa(isaddr)); goto drop; } if (ifp->if_addrlen != ah->ar_hln) { ARP_LOG(LOG_WARNING, "from %*D: addr len: new %d, " "i/f %d (ignored)\n", ifp->if_addrlen, (u_char *) ar_sha(ah), ":", ah->ar_hln, ifp->if_addrlen); goto drop; } /* * Warn if another host is using the same IP address, but only if the * IP address isn't 0.0.0.0, which is used for DHCP only, in which * case we suppress the warning to avoid false positive complaints of * potential misconfiguration. */ if (!bridged && !carped && isaddr.s_addr == myaddr.s_addr && myaddr.s_addr != 0) { ARP_LOG(LOG_ERR, "%*D is using my IP address %s on %s!\n", ifp->if_addrlen, (u_char *)ar_sha(ah), ":", inet_ntoa(isaddr), ifp->if_xname); itaddr = myaddr; ARPSTAT_INC(dupips); goto reply; } if (ifp->if_flags & IFF_STATICARP) goto reply; bzero(&sin, sizeof(sin)); sin.sin_len = sizeof(struct sockaddr_in); sin.sin_family = AF_INET; sin.sin_addr = isaddr; dst = (struct sockaddr *)&sin; IF_AFDATA_RLOCK(ifp); la = lla_lookup(LLTABLE(ifp), LLE_EXCLUSIVE, dst); IF_AFDATA_RUNLOCK(ifp); if (la != NULL) arp_check_update_lle(ah, isaddr, ifp, bridged, la); else if (itaddr.s_addr == myaddr.s_addr) { /* * Request/reply to our address, but no lle exists yet. * Calculate full link prepend to use in lle. */ linkhdrsize = sizeof(linkhdr); if (lltable_calc_llheader(ifp, AF_INET, ar_sha(ah), linkhdr, &linkhdrsize, &lladdr_off) != 0) goto reply; /* Allocate new entry */ la = lltable_alloc_entry(LLTABLE(ifp), 0, dst); if (la == NULL) { /* * lle creation may fail if source address belongs * to non-directly connected subnet. However, we * will try to answer the request instead of dropping * frame. */ goto reply; } lltable_set_entry_addr(ifp, la, linkhdr, linkhdrsize, lladdr_off); IF_AFDATA_WLOCK(ifp); LLE_WLOCK(la); la_tmp = lla_lookup(LLTABLE(ifp), LLE_EXCLUSIVE, dst); /* * Check if lle still does not exists. * If it does, that means that we either * 1) have configured it explicitly, via * 1a) 'arp -s' static entry or * 1b) interface address static record * or * 2) it was the result of sending first packet to-host * or * 3) it was another arp reply packet we handled in * different thread. * * In all cases except 3) we definitely need to prefer * existing lle. For the sake of simplicity, prefer any * existing lle over newly-create one. */ if (la_tmp == NULL) lltable_link_entry(LLTABLE(ifp), la); IF_AFDATA_WUNLOCK(ifp); if (la_tmp == NULL) { arp_mark_lle_reachable(la); LLE_WUNLOCK(la); } else { /* Free newly-create entry and handle packet */ lltable_free_entry(LLTABLE(ifp), la); la = la_tmp; la_tmp = NULL; arp_check_update_lle(ah, isaddr, ifp, bridged, la); /* arp_check_update_lle() returns @la unlocked */ } la = NULL; } reply: if (op != ARPOP_REQUEST) goto drop; ARPSTAT_INC(rxrequests); if (itaddr.s_addr == myaddr.s_addr) { /* Shortcut.. the receiving interface is the target. */ (void)memcpy(ar_tha(ah), ar_sha(ah), ah->ar_hln); (void)memcpy(ar_sha(ah), enaddr, ah->ar_hln); } else { struct llentry *lle = NULL; sin.sin_addr = itaddr; IF_AFDATA_RLOCK(ifp); lle = lla_lookup(LLTABLE(ifp), 0, (struct sockaddr *)&sin); IF_AFDATA_RUNLOCK(ifp); if ((lle != NULL) && (lle->la_flags & LLE_PUB)) { (void)memcpy(ar_tha(ah), ar_sha(ah), ah->ar_hln); (void)memcpy(ar_sha(ah), lle->ll_addr, ah->ar_hln); LLE_RUNLOCK(lle); } else { if (lle != NULL) LLE_RUNLOCK(lle); if (!V_arp_proxyall) goto drop; /* XXX MRT use table 0 for arp reply */ if (fib4_lookup_nh_basic(0, itaddr, 0, 0, &nh4) != 0) goto drop; /* * Don't send proxies for nodes on the same interface * as this one came out of, or we'll get into a fight * over who claims what Ether address. */ if (nh4.nh_ifp == ifp) goto drop; (void)memcpy(ar_tha(ah), ar_sha(ah), ah->ar_hln); (void)memcpy(ar_sha(ah), enaddr, ah->ar_hln); /* * Also check that the node which sent the ARP packet * is on the interface we expect it to be on. This * avoids ARP chaos if an interface is connected to the * wrong network. */ /* XXX MRT use table 0 for arp checks */ if (fib4_lookup_nh_basic(0, isaddr, 0, 0, &nh4) != 0) goto drop; if (nh4.nh_ifp != ifp) { ARP_LOG(LOG_INFO, "proxy: ignoring request" " from %s via %s\n", inet_ntoa(isaddr), ifp->if_xname); goto drop; } #ifdef DEBUG_PROXY printf("arp: proxying for %s\n", inet_ntoa(itaddr)); #endif } } if (itaddr.s_addr == myaddr.s_addr && IN_LINKLOCAL(ntohl(itaddr.s_addr))) { /* RFC 3927 link-local IPv4; always reply by broadcast. */ #ifdef DEBUG_LINKLOCAL printf("arp: sending reply for link-local addr %s\n", inet_ntoa(itaddr)); #endif m->m_flags |= M_BCAST; m->m_flags &= ~M_MCAST; } else { /* default behaviour; never reply by broadcast. */ m->m_flags &= ~(M_BCAST|M_MCAST); } (void)memcpy(ar_tpa(ah), ar_spa(ah), ah->ar_pln); (void)memcpy(ar_spa(ah), &itaddr, ah->ar_pln); ah->ar_op = htons(ARPOP_REPLY); ah->ar_pro = htons(ETHERTYPE_IP); /* let's be sure! */ m->m_len = sizeof(*ah) + (2 * ah->ar_pln) + (2 * ah->ar_hln); m->m_pkthdr.len = m->m_len; m->m_pkthdr.rcvif = NULL; sa.sa_family = AF_ARP; sa.sa_len = 2; /* Calculate link header for sending frame */ bzero(&ro, sizeof(ro)); linkhdrsize = sizeof(linkhdr); error = arp_fillheader(ifp, ah, 0, linkhdr, &linkhdrsize); /* * arp_fillheader() may fail due to lack of support inside encap request * routing. This is not necessary an error, AF_ARP can/should be handled * by if_output(). */ if (error != 0 && error != EAFNOSUPPORT) { ARP_LOG(LOG_ERR, "Failed to calculate ARP header on %s: %d\n", if_name(ifp), error); return; } ro.ro_prepend = linkhdr; ro.ro_plen = linkhdrsize; ro.ro_flags = 0; m_clrprotoflags(m); /* Avoid confusing lower layers. */ (*ifp->if_output)(ifp, m, &sa, &ro); ARPSTAT_INC(txreplies); return; drop: m_freem(m); } #endif /* * Checks received arp data against existing @la. * Updates lle state/performs notification if necessary. */ static void arp_check_update_lle(struct arphdr *ah, struct in_addr isaddr, struct ifnet *ifp, int bridged, struct llentry *la) { struct sockaddr sa; struct mbuf *m_hold, *m_hold_next; uint8_t linkhdr[LLE_MAX_LINKHDR]; size_t linkhdrsize; int lladdr_off; LLE_WLOCK_ASSERT(la); /* the following is not an error when doing bridging */ if (!bridged && la->lle_tbl->llt_ifp != ifp) { if (log_arp_wrong_iface) ARP_LOG(LOG_WARNING, "%s is on %s " "but got reply from %*D on %s\n", inet_ntoa(isaddr), la->lle_tbl->llt_ifp->if_xname, ifp->if_addrlen, (u_char *)ar_sha(ah), ":", ifp->if_xname); LLE_WUNLOCK(la); return; } if ((la->la_flags & LLE_VALID) && bcmp(ar_sha(ah), la->ll_addr, ifp->if_addrlen)) { if (la->la_flags & LLE_STATIC) { LLE_WUNLOCK(la); if (log_arp_permanent_modify) ARP_LOG(LOG_ERR, "%*D attempts to modify " "permanent entry for %s on %s\n", ifp->if_addrlen, (u_char *)ar_sha(ah), ":", inet_ntoa(isaddr), ifp->if_xname); return; } if (log_arp_movements) { ARP_LOG(LOG_INFO, "%s moved from %*D " "to %*D on %s\n", inet_ntoa(isaddr), ifp->if_addrlen, (u_char *)&la->ll_addr, ":", ifp->if_addrlen, (u_char *)ar_sha(ah), ":", ifp->if_xname); } } /* Calculate full link prepend to use in lle */ linkhdrsize = sizeof(linkhdr); if (lltable_calc_llheader(ifp, AF_INET, ar_sha(ah), linkhdr, &linkhdrsize, &lladdr_off) != 0) return; /* Check if something has changed */ if (memcmp(la->r_linkdata, linkhdr, linkhdrsize) != 0 || (la->la_flags & LLE_VALID) == 0) { /* Try to perform LLE update */ if (lltable_try_set_entry_addr(ifp, la, linkhdr, linkhdrsize, lladdr_off) == 0) return; /* Clear fast path feedback request if set */ la->r_skip_req = 0; } arp_mark_lle_reachable(la); /* * The packets are all freed within the call to the output * routine. * * NB: The lock MUST be released before the call to the * output routine. */ if (la->la_hold != NULL) { m_hold = la->la_hold; la->la_hold = NULL; la->la_numheld = 0; lltable_fill_sa_entry(la, &sa); LLE_WUNLOCK(la); for (; m_hold != NULL; m_hold = m_hold_next) { m_hold_next = m_hold->m_nextpkt; m_hold->m_nextpkt = NULL; /* Avoid confusing lower layers. */ m_clrprotoflags(m_hold); (*ifp->if_output)(ifp, m_hold, &sa, NULL); } } else LLE_WUNLOCK(la); } static void arp_mark_lle_reachable(struct llentry *la) { int canceled, wtime; LLE_WLOCK_ASSERT(la); la->ln_state = ARP_LLINFO_REACHABLE; EVENTHANDLER_INVOKE(lle_event, la, LLENTRY_RESOLVED); if (!(la->la_flags & LLE_STATIC)) { LLE_ADDREF(la); la->la_expire = time_uptime + V_arpt_keep; wtime = V_arpt_keep - V_arp_maxtries * V_arpt_rexmit; if (wtime < 0) wtime = V_arpt_keep; canceled = callout_reset(&la->lle_timer, hz * wtime, arptimer, la); if (canceled) LLE_REMREF(la); } la->la_asked = 0; la->la_preempt = V_arp_maxtries; } /* * Add pernament link-layer record for given interface address. */ static __noinline void arp_add_ifa_lle(struct ifnet *ifp, const struct sockaddr *dst) { struct llentry *lle, *lle_tmp; /* * Interface address LLE record is considered static * because kernel code relies on LLE_STATIC flag to check * if these entries can be rewriten by arp updates. */ lle = lltable_alloc_entry(LLTABLE(ifp), LLE_IFADDR | LLE_STATIC, dst); if (lle == NULL) { log(LOG_INFO, "arp_ifinit: cannot create arp " "entry for interface address\n"); return; } IF_AFDATA_WLOCK(ifp); LLE_WLOCK(lle); /* Unlink any entry if exists */ lle_tmp = lla_lookup(LLTABLE(ifp), LLE_EXCLUSIVE, dst); if (lle_tmp != NULL) lltable_unlink_entry(LLTABLE(ifp), lle_tmp); lltable_link_entry(LLTABLE(ifp), lle); IF_AFDATA_WUNLOCK(ifp); if (lle_tmp != NULL) EVENTHANDLER_INVOKE(lle_event, lle_tmp, LLENTRY_EXPIRED); EVENTHANDLER_INVOKE(lle_event, lle, LLENTRY_RESOLVED); LLE_WUNLOCK(lle); if (lle_tmp != NULL) lltable_free_entry(LLTABLE(ifp), lle_tmp); } void arp_ifinit(struct ifnet *ifp, struct ifaddr *ifa) { const struct sockaddr_in *dst_in; const struct sockaddr *dst; if (ifa->ifa_carp != NULL) return; dst = ifa->ifa_addr; dst_in = (const struct sockaddr_in *)dst; if (ntohl(dst_in->sin_addr.s_addr) == INADDR_ANY) return; arp_announce_ifaddr(ifp, dst_in->sin_addr, IF_LLADDR(ifp)); arp_add_ifa_lle(ifp, dst); } void arp_announce_ifaddr(struct ifnet *ifp, struct in_addr addr, u_char *enaddr) { if (ntohl(addr.s_addr) != INADDR_ANY) arprequest(ifp, &addr, &addr, enaddr); } /* * Sends gratuitous ARPs for each ifaddr to notify other * nodes about the address change. */ static __noinline void arp_handle_ifllchange(struct ifnet *ifp) { struct ifaddr *ifa; TAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) { if (ifa->ifa_addr->sa_family == AF_INET) arp_ifinit(ifp, ifa); } } /* * A handler for interface link layer address change event. */ static void arp_iflladdr(void *arg __unused, struct ifnet *ifp) { lltable_update_ifaddr(LLTABLE(ifp)); if ((ifp->if_flags & IFF_UP) != 0) arp_handle_ifllchange(ifp); } static void arp_init(void) { netisr_register(&arp_nh); if (IS_DEFAULT_VNET(curvnet)) iflladdr_tag = EVENTHANDLER_REGISTER(iflladdr_event, arp_iflladdr, NULL, EVENTHANDLER_PRI_ANY); - if (IS_DEFAULT_VNET(curvnet)) - iflladdr_tag = EVENTHANDLER_REGISTER(iflladdr_event, - arp_iflladdr, NULL, EVENTHANDLER_PRI_ANY); } SYSINIT(arp, SI_SUB_PROTO_DOMAIN, SI_ORDER_ANY, arp_init, 0); Index: projects/clang380-import/sys/powerpc/include/platform.h =================================================================== --- projects/clang380-import/sys/powerpc/include/platform.h (revision 293035) +++ projects/clang380-import/sys/powerpc/include/platform.h (revision 293036) @@ -1,62 +1,64 @@ /*- * Copyright (C) 1996 Wolfgang Solfrank. * Copyright (C) 1996 TooLs GmbH. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by TooLs GmbH. * 4. The name of TooLs GmbH may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $NetBSD: powerpc.h,v 1.3 2000/06/01 00:49:59 matt Exp $ * $FreeBSD$ */ #ifndef _MACHINE_PLATFORM_H_ #define _MACHINE_PLATFORM_H_ #include #include struct mem_region { uint64_t mr_start; uint64_t mr_size; }; void mem_regions(struct mem_region **, int *, struct mem_region **, int *); vm_offset_t platform_real_maxaddr(void); u_long platform_timebase_freq(struct cpuref *); int platform_smp_first_cpu(struct cpuref *); int platform_smp_next_cpu(struct cpuref *); int platform_smp_get_bsp(struct cpuref *); int platform_smp_start_cpu(struct pcpu *); void platform_smp_ap_init(void); const char *installed_platform(void); void platform_probe_and_attach(void); +void platform_cpu_idle(int); + void platform_sleep(void); #endif /* _MACHINE_PLATFORM_H_ */ Index: projects/clang380-import/sys/powerpc/mpc85xx/mpc85xx.h =================================================================== --- projects/clang380-import/sys/powerpc/mpc85xx/mpc85xx.h (revision 293035) +++ projects/clang380-import/sys/powerpc/mpc85xx/mpc85xx.h (revision 293036) @@ -1,151 +1,157 @@ /*- * Copyright (C) 2008 Semihalf, Rafal Jaworowski * Copyright 2006 by Juniper Networks. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _MPC85XX_H_ #define _MPC85XX_H_ #include /* * Configuration control and status registers */ extern vm_offset_t ccsrbar_va; #define CCSRBAR_VA ccsrbar_va #define OCP85XX_CCSRBAR (CCSRBAR_VA + 0x0) #define OCP85XX_BPTR (CCSRBAR_VA + 0x20) #define OCP85XX_BSTRH (CCSRBAR_VA + 0x20) #define OCP85XX_BSTRL (CCSRBAR_VA + 0x24) #define OCP85XX_BSTAR (CCSRBAR_VA + 0x28) #define OCP85XX_COREDISR (CCSRBAR_VA + 0xE0094) #define OCP85XX_BRR (CCSRBAR_VA + 0xE00E4) /* * Run Control and Power Management registers */ #define CCSR_CTBENR (CCSRBAR_VA + 0xE2084) #define CCSR_CTBCKSELR (CCSRBAR_VA + 0xE208C) #define CCSR_CTBCHLTCR (CCSRBAR_VA + 0xE2094) /* * DDR Memory controller. */ #define OCP85XX_DDR1_CS0_CONFIG (CCSRBAR_VA + 0x8080) /* * E500 Coherency Module registers */ #define OCP85XX_EEBPCR (CCSRBAR_VA + 0x1010) /* * Local access registers */ #if defined(QORIQ_DPAA) /* Write order: OCP_LAWBARH -> OCP_LAWBARL -> OCP_LAWSR */ #define OCP85XX_LAWBARH(n) (CCSRBAR_VA + 0xc00 + 0x10 * (n)) #define OCP85XX_LAWBARL(n) (CCSRBAR_VA + 0xc04 + 0x10 * (n)) #define OCP85XX_LAWSR(n) (CCSRBAR_VA + 0xc08 + 0x10 * (n)) #else #define OCP85XX_LAWBAR(n) (CCSRBAR_VA + 0xc08 + 0x10 * (n)) #define OCP85XX_LAWSR(n) (CCSRBAR_VA + 0xc10 + 0x10 * (n)) #endif /* Attribute register */ #define OCP85XX_ENA_MASK 0x80000000 #define OCP85XX_DIS_MASK 0x7fffffff #if defined(QORIQ_DPAA) #define OCP85XX_TGTIF_LBC 0x1f #define OCP85XX_TGTIF_RAM_INTL 0x14 #define OCP85XX_TGTIF_RAM1 0x10 #define OCP85XX_TGTIF_RAM2 0x11 #define OCP85XX_TGTIF_BMAN 0x18 #define OCP85XX_TGTIF_DCSR 0x1D #define OCP85XX_TGTIF_QMAN 0x3C #define OCP85XX_TRGT_SHIFT 20 #else #define OCP85XX_TGTIF_LBC 0x04 #define OCP85XX_TGTIF_RAM_INTL 0x0b #define OCP85XX_TGTIF_RIO 0x0c #define OCP85XX_TGTIF_RAM1 0x0f #define OCP85XX_TGTIF_RAM2 0x16 #endif /* * L2 cache registers */ #define OCP85XX_L2CTL (CCSRBAR_VA + 0x20000) /* * L3 CoreNet platform cache (CPC) registers */ #define OCP85XX_CPC_CSR0 (CCSRBAR_VA + 0x10000) #define OCP85XX_CPC_CSR0_CE 0x80000000 #define OCP85XX_CPC_CSR0_PE 0x40000000 #define OCP85XX_CPC_CSR0_FI 0x00200000 #define OCP85XX_CPC_CSR0_WT 0x00080000 #define OCP85XX_CPC_CSR0_FL 0x00000800 #define OCP85XX_CPC_CSR0_LFC 0x00000400 #define OCP85XX_CPC_CFG0 (CCSRBAR_VA + 0x10008) #define OCP85XX_CPC_CFG_SZ_MASK 0x00003fff #define OCP85XX_CPC_CFG0_SZ_K(x) (((x) & OCP85XX_CPC_CFG_SZ_MASK) << 6) /* * Power-On Reset configuration */ #define OCP85XX_PORDEVSR (CCSRBAR_VA + 0xe000c) #define OCP85XX_PORDEVSR_IO_SEL 0x00780000 #define OCP85XX_PORDEVSR_IO_SEL_SHIFT 19 #define OCP85XX_PORDEVSR2 (CCSRBAR_VA + 0xe0014) /* * Status Registers. */ #define OCP85XX_RSTCR (CCSRBAR_VA + 0xe00b0) /* + * Run Control/Power Management Registers. + */ +#define OCP85XX_RCPM_CDOZSR (CCSRBAR_VA + 0xe2004) +#define OCP85XX_RCPM_CDOZCR (CCSRBAR_VA + 0xe200c) + +/* * Prototypes. */ uint32_t ccsr_read4(uintptr_t addr); void ccsr_write4(uintptr_t addr, uint32_t val); int law_enable(int trgt, uint64_t bar, uint32_t size); int law_disable(int trgt, uint64_t bar, uint32_t size); int law_getmax(void); int law_pci_target(struct resource *, int *, int *); DECLARE_CLASS(mpc85xx_platform); int mpc85xx_attach(platform_t); void mpc85xx_enable_l3_cache(void); void mpc85xx_fix_errata(vm_offset_t); void dataloss_erratum_access(vm_offset_t, uint32_t); #endif /* _MPC85XX_H_ */ Index: projects/clang380-import/sys/powerpc/mpc85xx/platform_mpc85xx.c =================================================================== --- projects/clang380-import/sys/powerpc/mpc85xx/platform_mpc85xx.c (revision 293035) +++ projects/clang380-import/sys/powerpc/mpc85xx/platform_mpc85xx.c (revision 293036) @@ -1,480 +1,517 @@ /*- * Copyright (c) 2008-2012 Semihalf. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "opt_platform.h" #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "platform_if.h" #ifdef SMP extern void *ap_pcpu; extern vm_paddr_t kernload; /* Kernel physical load address */ extern uint8_t __boot_page[]; /* Boot page body */ extern uint32_t bp_ntlb1s; extern uint32_t bp_tlb1[]; extern uint32_t bp_tlb1_end[]; #endif extern uint32_t *bootinfo; vm_offset_t ccsrbar_va; static int cpu, maxcpu; static int mpc85xx_probe(platform_t); static void mpc85xx_mem_regions(platform_t, struct mem_region *phys, int *physsz, struct mem_region *avail, int *availsz); static u_long mpc85xx_timebase_freq(platform_t, struct cpuref *cpuref); static int mpc85xx_smp_first_cpu(platform_t, struct cpuref *cpuref); static int mpc85xx_smp_next_cpu(platform_t, struct cpuref *cpuref); static int mpc85xx_smp_get_bsp(platform_t, struct cpuref *cpuref); static int mpc85xx_smp_start_cpu(platform_t, struct pcpu *cpu); +static void mpc85xx_idle(platform_t, int cpu); +static int mpc85xx_idle_wakeup(platform_t plat, int cpu); static void mpc85xx_reset(platform_t); static platform_method_t mpc85xx_methods[] = { PLATFORMMETHOD(platform_probe, mpc85xx_probe), PLATFORMMETHOD(platform_attach, mpc85xx_attach), PLATFORMMETHOD(platform_mem_regions, mpc85xx_mem_regions), PLATFORMMETHOD(platform_timebase_freq, mpc85xx_timebase_freq), PLATFORMMETHOD(platform_smp_first_cpu, mpc85xx_smp_first_cpu), PLATFORMMETHOD(platform_smp_next_cpu, mpc85xx_smp_next_cpu), PLATFORMMETHOD(platform_smp_get_bsp, mpc85xx_smp_get_bsp), PLATFORMMETHOD(platform_smp_start_cpu, mpc85xx_smp_start_cpu), PLATFORMMETHOD(platform_reset, mpc85xx_reset), + PLATFORMMETHOD(platform_idle, mpc85xx_idle), + PLATFORMMETHOD(platform_idle_wakeup, mpc85xx_idle_wakeup), PLATFORMMETHOD_END }; DEFINE_CLASS_0(mpc85xx, mpc85xx_platform, mpc85xx_methods, 0); PLATFORM_DEF(mpc85xx_platform); static int mpc85xx_probe(platform_t plat) { u_int pvr = mfpvr() >> 16; if ((pvr & 0xfff0) == FSL_E500v1) return (BUS_PROBE_DEFAULT); return (ENXIO); } int mpc85xx_attach(platform_t plat) { phandle_t cpus, child, ccsr; const char *soc_name_guesses[] = {"/soc", "soc", NULL}; const char **name; pcell_t ranges[6], acells, pacells, scells; uint32_t sr; uint64_t ccsrbar, ccsrsize; int i, law_max, tgt; if ((cpus = OF_finddevice("/cpus")) != -1) { for (maxcpu = 0, child = OF_child(cpus); child != 0; child = OF_peer(child), maxcpu++) ; } else maxcpu = 1; /* * Locate CCSR region. Irritatingly, there is no way to find it * unless you already know where it is. Try to infer its location * from the device tree. */ ccsr = -1; for (name = soc_name_guesses; *name != NULL && ccsr == -1; name++) ccsr = OF_finddevice(*name); if (ccsr == -1) { char type[64]; /* That didn't work. Search for devices of type "soc" */ child = OF_child(OF_peer(0)); for (OF_child(child); child != 0; child = OF_peer(child)) { if (OF_getprop(child, "device_type", type, sizeof(type)) <= 0) continue; if (strcmp(type, "soc") == 0) { ccsr = child; break; } } } if (ccsr == -1) panic("Could not locate CCSR window!"); OF_getprop(ccsr, "#size-cells", &scells, sizeof(scells)); OF_getprop(ccsr, "#address-cells", &acells, sizeof(acells)); OF_searchprop(OF_parent(ccsr), "#address-cells", &pacells, sizeof(pacells)); OF_getprop(ccsr, "ranges", ranges, sizeof(ranges)); ccsrbar = ccsrsize = 0; for (i = acells; i < acells + pacells; i++) { ccsrbar <<= 32; ccsrbar |= ranges[i]; } for (i = acells + pacells; i < acells + pacells + scells; i++) { ccsrsize <<= 32; ccsrsize |= ranges[i]; } ccsrbar_va = pmap_early_io_map(ccsrbar, ccsrsize); mpc85xx_fix_errata(ccsrbar_va); mpc85xx_enable_l3_cache(); /* * Clear local access windows. Skip DRAM entries, so we don't shoot * ourselves in the foot. */ law_max = law_getmax(); for (i = 0; i < law_max; i++) { sr = ccsr_read4(OCP85XX_LAWSR(i)); if ((sr & OCP85XX_ENA_MASK) == 0) continue; tgt = (sr & 0x01f00000) >> 20; if (tgt == OCP85XX_TGTIF_RAM1 || tgt == OCP85XX_TGTIF_RAM2 || tgt == OCP85XX_TGTIF_RAM_INTL) continue; ccsr_write4(OCP85XX_LAWSR(i), sr & OCP85XX_DIS_MASK); } return (0); } void mpc85xx_mem_regions(platform_t plat, struct mem_region *phys, int *physsz, struct mem_region *avail, int *availsz) { ofw_mem_regions(phys, physsz, avail, availsz); } static u_long mpc85xx_timebase_freq(platform_t plat, struct cpuref *cpuref) { u_long ticks; phandle_t cpus, child; pcell_t freq; if (bootinfo != NULL) { if (bootinfo[0] == 1) { /* Backward compatibility. See 8-STABLE. */ ticks = bootinfo[3] >> 3; } else { /* Compatibility with Juniper's loader. */ ticks = bootinfo[5] >> 3; } } else ticks = 0; if ((cpus = OF_finddevice("/cpus")) == -1) goto out; if ((child = OF_child(cpus)) == 0) goto out; switch (OF_getproplen(child, "timebase-frequency")) { case 4: { uint32_t tbase; OF_getprop(child, "timebase-frequency", &tbase, sizeof(tbase)); ticks = tbase; return (ticks); } case 8: { uint64_t tbase; OF_getprop(child, "timebase-frequency", &tbase, sizeof(tbase)); ticks = tbase; return (ticks); } default: break; } freq = 0; if (OF_getprop(child, "bus-frequency", (void *)&freq, sizeof(freq)) <= 0) goto out; /* * Time Base and Decrementer are updated every 8 CCB bus clocks. * HID0[SEL_TBCLK] = 0 */ if (freq != 0) #ifdef QORIQ_DPAA ticks = freq / 32; #else ticks = freq / 8; #endif out: if (ticks <= 0) panic("Unable to determine timebase frequency!"); return (ticks); } static int mpc85xx_smp_first_cpu(platform_t plat, struct cpuref *cpuref) { cpu = 0; cpuref->cr_cpuid = cpu; cpuref->cr_hwref = cpuref->cr_cpuid; if (bootverbose) printf("powerpc_smp_first_cpu: cpuid %d\n", cpuref->cr_cpuid); cpu++; return (0); } static int mpc85xx_smp_next_cpu(platform_t plat, struct cpuref *cpuref) { if (cpu >= maxcpu) return (ENOENT); cpuref->cr_cpuid = cpu++; cpuref->cr_hwref = cpuref->cr_cpuid; if (bootverbose) printf("powerpc_smp_next_cpu: cpuid %d\n", cpuref->cr_cpuid); return (0); } static int mpc85xx_smp_get_bsp(platform_t plat, struct cpuref *cpuref) { cpuref->cr_cpuid = mfspr(SPR_PIR); cpuref->cr_hwref = cpuref->cr_cpuid; return (0); } static int mpc85xx_smp_start_cpu(platform_t plat, struct pcpu *pc) { #ifdef SMP uint32_t *tlb1; vm_paddr_t bptr; uint32_t reg; int i, timeout; uintptr_t brr; int cpuid; #ifdef QORIQ_DPAA uint32_t tgt; reg = ccsr_read4(OCP85XX_COREDISR); cpuid = pc->pc_cpuid; if ((reg & cpuid) != 0) { printf("%s: CPU %d is disabled!\n", __func__, pc->pc_cpuid); return (-1); } brr = OCP85XX_BRR; #else /* QORIQ_DPAA */ brr = OCP85XX_EEBPCR; cpuid = pc->pc_cpuid + 24; #endif reg = ccsr_read4(brr); if ((reg & (1 << cpuid)) != 0) { printf("SMP: CPU %d already out of hold-off state!\n", pc->pc_cpuid); return (ENXIO); } ap_pcpu = pc; __asm __volatile("msync; isync"); i = 0; tlb1 = bp_tlb1; while (i < bp_ntlb1s && tlb1 < bp_tlb1_end) { mtspr(SPR_MAS0, MAS0_TLBSEL(1) | MAS0_ESEL(i)); __asm __volatile("isync; tlbre"); tlb1[0] = mfspr(SPR_MAS1); tlb1[1] = mfspr(SPR_MAS2); tlb1[2] = mfspr(SPR_MAS3); i++; tlb1 += 3; } if (i < bp_ntlb1s) bp_ntlb1s = i; /* Flush caches to have our changes hit DRAM. */ cpu_flush_dcache(__boot_page, 4096); bptr = ((vm_paddr_t)(uintptr_t)__boot_page - KERNBASE) + kernload; KASSERT((bptr & 0xfff) == 0, ("%s: boot page is not aligned (%#jx)", __func__, (uintmax_t)bptr)); #ifdef QORIQ_DPAA /* * Read DDR controller configuration to select proper BPTR target ID. * * On P5020 bit 29 of DDR1_CS0_CONFIG enables DDR controllers * interleaving. If this bit is set, we have to use * OCP85XX_TGTIF_RAM_INTL as BPTR target ID. On other QorIQ DPAA SoCs, * this bit is reserved and always 0. */ reg = ccsr_read4(OCP85XX_DDR1_CS0_CONFIG); if (reg & (1 << 29)) tgt = OCP85XX_TGTIF_RAM_INTL; else tgt = OCP85XX_TGTIF_RAM1; /* * Set BSTR to the physical address of the boot page */ ccsr_write4(OCP85XX_BSTRH, bptr >> 32); ccsr_write4(OCP85XX_BSTRL, bptr); ccsr_write4(OCP85XX_BSTAR, OCP85XX_ENA_MASK | (tgt << OCP85XX_TRGT_SHIFT) | (ffsl(PAGE_SIZE) - 2)); /* Read back OCP85XX_BSTAR to synchronize write */ ccsr_read4(OCP85XX_BSTAR); /* * Enable and configure time base on new CPU. */ /* Set TB clock source to platform clock / 32 */ reg = ccsr_read4(CCSR_CTBCKSELR); ccsr_write4(CCSR_CTBCKSELR, reg & ~(1 << pc->pc_cpuid)); /* Enable TB */ reg = ccsr_read4(CCSR_CTBENR); ccsr_write4(CCSR_CTBENR, reg | (1 << pc->pc_cpuid)); #else /* * Set BPTR to the physical address of the boot page */ bptr = (bptr >> 12) | 0x80000000u; ccsr_write4(OCP85XX_BPTR, bptr); __asm __volatile("isync; msync"); #endif /* QORIQ_DPAA */ /* * Release AP from hold-off state */ reg = ccsr_read4(brr); ccsr_write4(brr, reg | (1 << cpuid)); __asm __volatile("isync; msync"); timeout = 500; while (!pc->pc_awake && timeout--) DELAY(1000); /* wait 1ms */ /* * Disable boot page translation so that the 4K page at the default * address (= 0xfffff000) isn't permanently remapped and thus not * usable otherwise. */ #ifdef QORIQ_DPAA ccsr_write4(OCP85XX_BSTAR, 0); #else ccsr_write4(OCP85XX_BPTR, 0); #endif __asm __volatile("isync; msync"); if (!pc->pc_awake) printf("SMP: CPU %d didn't wake up.\n", pc->pc_cpuid); return ((pc->pc_awake) ? 0 : EBUSY); #else /* No SMP support */ return (ENXIO); #endif } static void mpc85xx_reset(platform_t plat) { /* * Try the dedicated reset register first. * If the SoC doesn't have one, we'll fall * back to using the debug control register. */ ccsr_write4(OCP85XX_RSTCR, 2); /* Clear DBCR0, disables debug interrupts and events. */ mtspr(SPR_DBCR0, 0); __asm __volatile("isync"); /* Enable Debug Interrupts in MSR. */ mtmsr(mfmsr() | PSL_DE); /* Enable debug interrupts and issue reset. */ mtspr(SPR_DBCR0, mfspr(SPR_DBCR0) | DBCR0_IDM | DBCR0_RST_SYSTEM); printf("Reset failed...\n"); while (1) ; } +static void +mpc85xx_idle(platform_t plat, int cpu) +{ +#ifdef QORIQ_DPAA + uint32_t reg; + + reg = ccsr_read4(OCP85XX_RCPM_CDOZCR); + ccsr_write4(OCP85XX_RCPM_CDOZCR, reg | (1 << cpu)); + ccsr_read4(OCP85XX_RCPM_CDOZCR); +#else + register_t msr; + + msr = mfmsr(); + /* Freescale E500 core RM section 6.4.1. */ + __asm __volatile("msync; mtmsr %0; isync" :: + "r" (msr | PSL_WE)); +#endif +} + +static int +mpc85xx_idle_wakeup(platform_t plat, int cpu) +{ +#ifdef QORIQ_DPAA + uint32_t reg; + + reg = ccsr_read4(OCP85XX_RCPM_CDOZCR); + ccsr_write4(OCP85XX_RCPM_CDOZCR, reg & ~(1 << cpu)); + ccsr_read4(OCP85XX_RCPM_CDOZCR); + + return (1); +#endif + return (0); +} Index: projects/clang380-import/sys/powerpc/powerpc/cpu.c =================================================================== --- projects/clang380-import/sys/powerpc/powerpc/cpu.c (revision 293035) +++ projects/clang380-import/sys/powerpc/powerpc/cpu.c (revision 293036) @@ -1,664 +1,653 @@ /*- * Copyright (c) 2001 Matt Thomas. * Copyright (c) 2001 Tsubai Masanari. * Copyright (c) 1998, 1999, 2001 Internet Research Institute, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by * Internet Research Institute, Inc. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (C) 2003 Benno Rice. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY Benno Rice ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * from $NetBSD: cpu_subr.c,v 1.1 2003/02/03 17:10:09 matt Exp $ * $FreeBSD$ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static void cpu_6xx_setup(int cpuid, uint16_t vers); static void cpu_970_setup(int cpuid, uint16_t vers); static void cpu_booke_setup(int cpuid, uint16_t vers); int powerpc_pow_enabled; void (*cpu_idle_hook)(sbintime_t) = NULL; static void cpu_idle_60x(sbintime_t); static void cpu_idle_booke(sbintime_t); struct cputab { const char *name; uint16_t version; uint16_t revfmt; int features; /* Do not include PPC_FEATURE_32 or * PPC_FEATURE_HAS_MMU */ void (*cpu_setup)(int cpuid, uint16_t vers); }; #define REVFMT_MAJMIN 1 /* %u.%u */ #define REVFMT_HEX 2 /* 0x%04x */ #define REVFMT_DEC 3 /* %u */ static const struct cputab models[] = { { "Motorola PowerPC 601", MPC601, REVFMT_DEC, PPC_FEATURE_HAS_FPU | PPC_FEATURE_UNIFIED_CACHE, cpu_6xx_setup }, { "Motorola PowerPC 602", MPC602, REVFMT_DEC, PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 603", MPC603, REVFMT_MAJMIN, PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 603e", MPC603e, REVFMT_MAJMIN, PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 603ev", MPC603ev, REVFMT_MAJMIN, PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 604", MPC604, REVFMT_MAJMIN, PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 604ev", MPC604ev, REVFMT_MAJMIN, PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 620", MPC620, REVFMT_HEX, PPC_FEATURE_64 | PPC_FEATURE_HAS_FPU, NULL }, { "Motorola PowerPC 750", MPC750, REVFMT_MAJMIN, PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "IBM PowerPC 750FX", IBM750FX, REVFMT_MAJMIN, PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "IBM PowerPC 970", IBM970, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_970_setup }, { "IBM PowerPC 970FX", IBM970FX, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_970_setup }, { "IBM PowerPC 970GX", IBM970GX, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_970_setup }, { "IBM PowerPC 970MP", IBM970MP, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_970_setup }, { "IBM POWER4", IBMPOWER4, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_FPU, NULL }, { "IBM POWER4+", IBMPOWER4PLUS, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_FPU, NULL }, { "IBM POWER5", IBMPOWER5, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_FPU, NULL }, { "IBM POWER5+", IBMPOWER5PLUS, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_FPU, NULL }, { "IBM POWER6", IBMPOWER6, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, NULL }, { "IBM POWER7", IBMPOWER7, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU | PPC_FEATURE_HAS_VSX, NULL }, { "IBM POWER7+", IBMPOWER7PLUS, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU | PPC_FEATURE_HAS_VSX, NULL }, { "IBM POWER8E", IBMPOWER8E, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU | PPC_FEATURE_HAS_VSX, NULL }, { "IBM POWER8", IBMPOWER8, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU | PPC_FEATURE_HAS_VSX, NULL }, { "Motorola PowerPC 7400", MPC7400, REVFMT_MAJMIN, PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 7410", MPC7410, REVFMT_MAJMIN, PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 7450", MPC7450, REVFMT_MAJMIN, PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 7455", MPC7455, REVFMT_MAJMIN, PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 7457", MPC7457, REVFMT_MAJMIN, PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 7447A", MPC7447A, REVFMT_MAJMIN, PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 7448", MPC7448, REVFMT_MAJMIN, PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 8240", MPC8240, REVFMT_MAJMIN, PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Motorola PowerPC 8245", MPC8245, REVFMT_MAJMIN, PPC_FEATURE_HAS_FPU, cpu_6xx_setup }, { "Freescale e500v1 core", FSL_E500v1, REVFMT_MAJMIN, 0, cpu_booke_setup }, { "Freescale e500v2 core", FSL_E500v2, REVFMT_MAJMIN, 0, cpu_booke_setup }, { "Freescale e500mc core", FSL_E500mc, REVFMT_MAJMIN, PPC_FEATURE_HAS_FPU, cpu_booke_setup }, { "Freescale e5500 core", FSL_E5500, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_FPU, cpu_booke_setup }, { "Freescale e6500 core", FSL_E6500, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, cpu_booke_setup }, { "IBM Cell Broadband Engine", IBMCELLBE, REVFMT_MAJMIN, PPC_FEATURE_64 | PPC_FEATURE_HAS_ALTIVEC | PPC_FEATURE_HAS_FPU, NULL}, { "Unknown PowerPC CPU", 0, REVFMT_HEX, 0, NULL }, }; static void cpu_6xx_print_cacheinfo(u_int, uint16_t); static int cpu_feature_bit(SYSCTL_HANDLER_ARGS); static char model[64]; SYSCTL_STRING(_hw, HW_MODEL, model, CTLFLAG_RD, model, 0, ""); int cpu_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU; SYSCTL_OPAQUE(_hw, OID_AUTO, cpu_features, CTLFLAG_RD, &cpu_features, sizeof(cpu_features), "IX", "PowerPC CPU features"); /* Provide some user-friendly aliases for bits in cpu_features */ SYSCTL_PROC(_hw, OID_AUTO, floatingpoint, CTLTYPE_INT | CTLFLAG_RD, 0, PPC_FEATURE_HAS_FPU, cpu_feature_bit, "I", "Floating point instructions executed in hardware"); SYSCTL_PROC(_hw, OID_AUTO, altivec, CTLTYPE_INT | CTLFLAG_RD, 0, PPC_FEATURE_HAS_ALTIVEC, cpu_feature_bit, "I", "CPU supports Altivec"); void cpu_setup(u_int cpuid) { u_int pvr, maj, min; uint16_t vers, rev, revfmt; uint64_t cps; const struct cputab *cp; const char *name; pvr = mfpvr(); vers = pvr >> 16; rev = pvr; switch (vers) { case MPC7410: min = (pvr >> 0) & 0xff; maj = min <= 4 ? 1 : 2; break; case FSL_E500v1: case FSL_E500v2: case FSL_E500mc: case FSL_E5500: maj = (pvr >> 4) & 0xf; min = (pvr >> 0) & 0xf; break; default: maj = (pvr >> 8) & 0xf; min = (pvr >> 0) & 0xf; } for (cp = models; cp->version != 0; cp++) { if (cp->version == vers) break; } revfmt = cp->revfmt; name = cp->name; if (rev == MPC750 && pvr == 15) { name = "Motorola MPC755"; revfmt = REVFMT_HEX; } strncpy(model, name, sizeof(model) - 1); printf("cpu%d: %s revision ", cpuid, name); switch (revfmt) { case REVFMT_MAJMIN: printf("%u.%u", maj, min); break; case REVFMT_HEX: printf("0x%04x", rev); break; case REVFMT_DEC: printf("%u", rev); break; } if (cpu_est_clockrate(0, &cps) == 0) printf(", %jd.%02jd MHz", cps / 1000000, (cps / 10000) % 100); printf("\n"); cpu_features |= cp->features; printf("cpu%d: Features %b\n", cpuid, cpu_features, PPC_FEATURE_BITMASK); /* * Configure CPU */ if (cp->cpu_setup != NULL) cp->cpu_setup(cpuid, vers); } /* Get current clock frequency for the given cpu id. */ int cpu_est_clockrate(int cpu_id, uint64_t *cps) { uint16_t vers; register_t msr; phandle_t cpu, dev, root; int res = 0; char buf[8]; vers = mfpvr() >> 16; msr = mfmsr(); mtmsr(msr & ~PSL_EE); switch (vers) { case MPC7450: case MPC7455: case MPC7457: case MPC750: case IBM750FX: case MPC7400: case MPC7410: case MPC7447A: case MPC7448: mtspr(SPR_MMCR0, SPR_MMCR0_FC); mtspr(SPR_PMC1, 0); mtspr(SPR_MMCR0, SPR_MMCR0_PMC1SEL(PMCN_CYCLES)); DELAY(1000); *cps = (mfspr(SPR_PMC1) * 1000) + 4999; mtspr(SPR_MMCR0, SPR_MMCR0_FC); mtmsr(msr); return (0); case IBM970: case IBM970FX: case IBM970MP: isync(); mtspr(SPR_970MMCR0, SPR_MMCR0_FC); isync(); mtspr(SPR_970MMCR1, 0); mtspr(SPR_970MMCRA, 0); mtspr(SPR_970PMC1, 0); mtspr(SPR_970MMCR0, SPR_970MMCR0_PMC1SEL(PMC970N_CYCLES)); isync(); DELAY(1000); powerpc_sync(); mtspr(SPR_970MMCR0, SPR_MMCR0_FC); *cps = (mfspr(SPR_970PMC1) * 1000) + 4999; mtmsr(msr); return (0); default: root = OF_peer(0); if (root == 0) return (ENXIO); dev = OF_child(root); while (dev != 0) { res = OF_getprop(dev, "name", buf, sizeof(buf)); if (res > 0 && strcmp(buf, "cpus") == 0) break; dev = OF_peer(dev); } cpu = OF_child(dev); while (cpu != 0) { res = OF_getprop(cpu, "device_type", buf, sizeof(buf)); if (res > 0 && strcmp(buf, "cpu") == 0) break; cpu = OF_peer(cpu); } if (cpu == 0) return (ENOENT); if (OF_getprop(cpu, "ibm,extended-clock-frequency", cps, sizeof(*cps)) >= 0) { return (0); } else if (OF_getprop(cpu, "clock-frequency", cps, sizeof(cell_t)) >= 0) { *cps >>= 32; return (0); } else { return (ENOENT); } } } void cpu_6xx_setup(int cpuid, uint16_t vers) { register_t hid0, pvr; const char *bitmask; hid0 = mfspr(SPR_HID0); pvr = mfpvr(); /* * Configure power-saving mode. */ switch (vers) { case MPC603: case MPC603e: case MPC603ev: case MPC604ev: case MPC750: case IBM750FX: case MPC7400: case MPC7410: case MPC8240: case MPC8245: /* Select DOZE mode. */ hid0 &= ~(HID0_DOZE | HID0_NAP | HID0_SLEEP); hid0 |= HID0_DOZE | HID0_DPM; powerpc_pow_enabled = 1; break; case MPC7448: case MPC7447A: case MPC7457: case MPC7455: case MPC7450: /* Enable the 7450 branch caches */ hid0 |= HID0_SGE | HID0_BTIC; hid0 |= HID0_LRSTK | HID0_FOLD | HID0_BHT; /* Disable BTIC on 7450 Rev 2.0 or earlier and on 7457 */ if (((pvr >> 16) == MPC7450 && (pvr & 0xFFFF) <= 0x0200) || (pvr >> 16) == MPC7457) hid0 &= ~HID0_BTIC; /* Select NAP mode. */ hid0 &= ~(HID0_DOZE | HID0_NAP | HID0_SLEEP); hid0 |= HID0_NAP | HID0_DPM; powerpc_pow_enabled = 1; break; default: /* No power-saving mode is available. */ ; } switch (vers) { case IBM750FX: case MPC750: hid0 &= ~HID0_DBP; /* XXX correct? */ hid0 |= HID0_EMCP | HID0_BTIC | HID0_SGE | HID0_BHT; break; case MPC7400: case MPC7410: hid0 &= ~HID0_SPD; hid0 |= HID0_EMCP | HID0_BTIC | HID0_SGE | HID0_BHT; hid0 |= HID0_EIEC; break; } mtspr(SPR_HID0, hid0); if (bootverbose) cpu_6xx_print_cacheinfo(cpuid, vers); switch (vers) { case MPC7447A: case MPC7448: case MPC7450: case MPC7455: case MPC7457: bitmask = HID0_7450_BITMASK; break; default: bitmask = HID0_BITMASK; break; } printf("cpu%d: HID0 %b\n", cpuid, (int)hid0, bitmask); if (cpu_idle_hook == NULL) cpu_idle_hook = cpu_idle_60x; } static void cpu_6xx_print_cacheinfo(u_int cpuid, uint16_t vers) { register_t hid; hid = mfspr(SPR_HID0); printf("cpu%u: ", cpuid); printf("L1 I-cache %sabled, ", (hid & HID0_ICE) ? "en" : "dis"); printf("L1 D-cache %sabled\n", (hid & HID0_DCE) ? "en" : "dis"); printf("cpu%u: ", cpuid); if (mfspr(SPR_L2CR) & L2CR_L2E) { switch (vers) { case MPC7450: case MPC7455: case MPC7457: printf("256KB L2 cache, "); if (mfspr(SPR_L3CR) & L3CR_L3E) printf("%cMB L3 backside cache", mfspr(SPR_L3CR) & L3CR_L3SIZ ? '2' : '1'); else printf("L3 cache disabled"); printf("\n"); break; case IBM750FX: printf("512KB L2 cache\n"); break; default: switch (mfspr(SPR_L2CR) & L2CR_L2SIZ) { case L2SIZ_256K: printf("256KB "); break; case L2SIZ_512K: printf("512KB "); break; case L2SIZ_1M: printf("1MB "); break; } printf("write-%s", (mfspr(SPR_L2CR) & L2CR_L2WT) ? "through" : "back"); if (mfspr(SPR_L2CR) & L2CR_L2PE) printf(", with parity"); printf(" backside cache\n"); break; } } else printf("L2 cache disabled\n"); } static void cpu_booke_setup(int cpuid, uint16_t vers) { #ifdef BOOKE_E500 register_t hid0; hid0 = mfspr(SPR_HID0); /* Programe power-management mode. */ hid0 &= ~(HID0_DOZE | HID0_NAP | HID0_SLEEP); hid0 |= HID0_DOZE; mtspr(SPR_HID0, hid0); printf("cpu%d: HID0 %b\n", cpuid, (int)hid0, HID0_E500_BITMASK); #endif if (cpu_idle_hook == NULL) cpu_idle_hook = cpu_idle_booke; } static void cpu_970_setup(int cpuid, uint16_t vers) { #ifdef AIM uint32_t hid0_hi, hid0_lo; __asm __volatile ("mfspr %0,%2; clrldi %1,%0,32; srdi %0,%0,32;" : "=r" (hid0_hi), "=r" (hid0_lo) : "K" (SPR_HID0)); /* Configure power-saving mode */ switch (vers) { case IBM970MP: hid0_hi |= (HID0_DEEPNAP | HID0_NAP | HID0_DPM); hid0_hi &= ~HID0_DOZE; break; default: hid0_hi |= (HID0_NAP | HID0_DPM); hid0_hi &= ~(HID0_DOZE | HID0_DEEPNAP); break; } powerpc_pow_enabled = 1; __asm __volatile (" \ sync; isync; \ sldi %0,%0,32; or %0,%0,%1; \ mtspr %2, %0; \ mfspr %0, %2; mfspr %0, %2; mfspr %0, %2; \ mfspr %0, %2; mfspr %0, %2; mfspr %0, %2; \ sync; isync" :: "r" (hid0_hi), "r"(hid0_lo), "K" (SPR_HID0)); __asm __volatile ("mfspr %0,%1; srdi %0,%0,32;" : "=r" (hid0_hi) : "K" (SPR_HID0)); printf("cpu%d: HID0 %b\n", cpuid, (int)(hid0_hi), HID0_970_BITMASK); #endif cpu_idle_hook = cpu_idle_60x; } static int cpu_feature_bit(SYSCTL_HANDLER_ARGS) { int result; result = (cpu_features & arg2) ? 1 : 0; return (sysctl_handle_int(oidp, &result, 0, req)); } void cpu_idle(int busy) { sbintime_t sbt = -1; #ifdef INVARIANTS if ((mfmsr() & PSL_EE) != PSL_EE) { struct thread *td = curthread; printf("td msr %#lx\n", (u_long)td->td_md.md_saved_msr); panic("ints disabled in idleproc!"); } #endif CTR2(KTR_SPARE2, "cpu_idle(%d) at %d", busy, curcpu); if (cpu_idle_hook != NULL) { if (!busy) { critical_enter(); sbt = cpu_idleclock(); } cpu_idle_hook(sbt); if (!busy) { cpu_activeclock(); critical_exit(); } } CTR2(KTR_SPARE2, "cpu_idle(%d) at %d done", busy, curcpu); } -int -cpu_idle_wakeup(int cpu) -{ - return (0); -} - static void cpu_idle_60x(sbintime_t sbt) { register_t msr; uint16_t vers; if (!powerpc_pow_enabled) return; msr = mfmsr(); vers = mfpvr() >> 16; #ifdef AIM switch (vers) { case IBM970: case IBM970FX: case IBM970MP: case MPC7447A: case MPC7448: case MPC7450: case MPC7455: case MPC7457: __asm __volatile("\ dssall; sync; mtmsr %0; isync" :: "r"(msr | PSL_POW)); break; default: powerpc_sync(); mtmsr(msr | PSL_POW); isync(); break; } #endif } static void cpu_idle_booke(sbintime_t sbt) { - register_t msr; - msr = mfmsr(); - #ifdef E500 - /* Freescale E500 core RM section 6.4.1. */ - __asm __volatile("msync; mtmsr %0; isync" :: - "r" (msr | PSL_WE)); + platform_cpu_idle(PCPU_GET(cpuid)); #endif } Index: projects/clang380-import/sys/powerpc/powerpc/platform.c =================================================================== --- projects/clang380-import/sys/powerpc/powerpc/platform.c (revision 293035) +++ projects/clang380-import/sys/powerpc/powerpc/platform.c (revision 293036) @@ -1,326 +1,340 @@ /*- * Copyright (c) 2005 Peter Grehan * Copyright (c) 2009 Nathan Whitehorn * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include __FBSDID("$FreeBSD$"); /* * Dispatch platform calls to the appropriate platform implementation * through a previously registered kernel object. */ #include #include #include #include #include +#include #include #include #include #include #include #include #include #include #include #include #include #include "platform_if.h" static platform_def_t *plat_def_impl; static platform_t plat_obj; static struct kobj_ops plat_kernel_kops; static struct platform_kobj plat_kernel_obj; static char plat_name[64] = ""; SYSCTL_STRING(_hw, OID_AUTO, platform, CTLFLAG_RD | CTLFLAG_TUN, plat_name, 0, "Platform currently in use"); static struct mem_region pregions[PHYS_AVAIL_SZ]; static struct mem_region aregions[PHYS_AVAIL_SZ]; static int npregions, naregions; /* * Memory region utilities: determine if two regions overlap, * and merge two overlapping regions into one */ static int memr_overlap(struct mem_region *r1, struct mem_region *r2) { if ((r1->mr_start + r1->mr_size) < r2->mr_start || (r2->mr_start + r2->mr_size) < r1->mr_start) return (FALSE); return (TRUE); } static void memr_merge(struct mem_region *from, struct mem_region *to) { vm_offset_t end; end = uqmax(to->mr_start + to->mr_size, from->mr_start + from->mr_size); to->mr_start = uqmin(from->mr_start, to->mr_start); to->mr_size = end - to->mr_start; } /* * Quick sort callout for comparing memory regions. */ static int mr_cmp(const void *a, const void *b) { const struct mem_region *regiona, *regionb; regiona = a; regionb = b; if (regiona->mr_start < regionb->mr_start) return (-1); else if (regiona->mr_start > regionb->mr_start) return (1); else return (0); } void mem_regions(struct mem_region **phys, int *physsz, struct mem_region **avail, int *availsz) { int i, j, still_merging; if (npregions == 0) { PLATFORM_MEM_REGIONS(plat_obj, pregions, &npregions, aregions, &naregions); qsort(pregions, npregions, sizeof(*pregions), mr_cmp); qsort(aregions, naregions, sizeof(*aregions), mr_cmp); /* Remove overlapping available regions */ do { still_merging = FALSE; for (i = 0; i < naregions; i++) { if (aregions[i].mr_size == 0) continue; for (j = i+1; j < naregions; j++) { if (aregions[j].mr_size == 0) continue; if (!memr_overlap(&aregions[j], &aregions[i])) continue; memr_merge(&aregions[j], &aregions[i]); /* mark inactive */ aregions[j].mr_size = 0; still_merging = TRUE; } } } while (still_merging == TRUE); /* Collapse zero-length available regions */ for (i = 0; i < naregions; i++) { if (aregions[i].mr_size == 0) { memcpy(&aregions[i], &aregions[i+1], (naregions - i - 1)*sizeof(*aregions)); naregions--; i--; } } } *phys = pregions; *avail = aregions; *physsz = npregions; *availsz = naregions; } int mem_valid(vm_offset_t addr, int len) { int i; if (npregions == 0) { struct mem_region *p, *a; int na, np; mem_regions(&p, &np, &a, &na); } for (i = 0; i < npregions; i++) if ((addr >= pregions[i].mr_start) && (addr + len <= pregions[i].mr_start + pregions[i].mr_size)) return (0); return (EFAULT); } vm_offset_t platform_real_maxaddr(void) { return (PLATFORM_REAL_MAXADDR(plat_obj)); } const char * installed_platform() { return (plat_def_impl->name); } u_long platform_timebase_freq(struct cpuref *cpu) { return (PLATFORM_TIMEBASE_FREQ(plat_obj, cpu)); } /* * Put the current CPU, as last step in suspend, to sleep */ void platform_sleep() { PLATFORM_SLEEP(plat_obj); } int platform_smp_first_cpu(struct cpuref *cpu) { return (PLATFORM_SMP_FIRST_CPU(plat_obj, cpu)); } int platform_smp_next_cpu(struct cpuref *cpu) { return (PLATFORM_SMP_NEXT_CPU(plat_obj, cpu)); } int platform_smp_get_bsp(struct cpuref *cpu) { return (PLATFORM_SMP_GET_BSP(plat_obj, cpu)); } int platform_smp_start_cpu(struct pcpu *cpu) { return (PLATFORM_SMP_START_CPU(plat_obj, cpu)); } void platform_smp_ap_init() { PLATFORM_SMP_AP_INIT(plat_obj); } #ifdef SMP struct cpu_group * cpu_topo(void) { return (PLATFORM_SMP_TOPO(plat_obj)); } #endif /* * Reset back to firmware. */ void cpu_reset() { PLATFORM_RESET(plat_obj); +} + +int +cpu_idle_wakeup(int cpu) +{ + return (PLATFORM_IDLE_WAKEUP(plat_obj, cpu)); +} + +void +platform_cpu_idle(int cpu) +{ + + PLATFORM_IDLE(plat_obj, cpu); } /* * Platform install routines. Highest priority wins, using the same * algorithm as bus attachment. */ SET_DECLARE(platform_set, platform_def_t); void platform_probe_and_attach() { platform_def_t **platpp, *platp; int prio, best_prio; plat_obj = &plat_kernel_obj; best_prio = 0; /* * Try to locate the best platform kobj */ SET_FOREACH(platpp, platform_set) { platp = *platpp; /* * Take care of compiling the selected class, and * then statically initialise the MMU object */ kobj_class_compile_static(platp, &plat_kernel_kops); kobj_init_static((kobj_t)plat_obj, platp); prio = PLATFORM_PROBE(plat_obj); /* Check for errors */ if (prio > 0) continue; /* * Check if this module was specifically requested through * the loader tunable we provide. */ if (strcmp(platp->name,plat_name) == 0) { plat_def_impl = platp; break; } /* Otherwise, see if it is better than our current best */ if (plat_def_impl == NULL || prio > best_prio) { best_prio = prio; plat_def_impl = platp; } /* * We can't free the KOBJ, since it is static. Reset the ops * member of this class so that we can come back later. */ platp->ops = NULL; } if (plat_def_impl == NULL) panic("No platform module found!"); /* * Recompile to make sure we ended with the * correct one, and then attach. */ kobj_class_compile_static(plat_def_impl, &plat_kernel_kops); kobj_init_static((kobj_t)plat_obj, plat_def_impl); strlcpy(plat_name,plat_def_impl->name,sizeof(plat_name)); PLATFORM_ATTACH(plat_obj); } Index: projects/clang380-import/sys/powerpc/powerpc/platform_if.m =================================================================== --- projects/clang380-import/sys/powerpc/powerpc/platform_if.m (revision 293035) +++ projects/clang380-import/sys/powerpc/powerpc/platform_if.m (revision 293036) @@ -1,219 +1,243 @@ #- # Copyright (c) 2009 Nathan Whitehorn # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # $FreeBSD$ # #include #include #include #include #include #include #include #include #include /** * @defgroup PLATFORM platform - KObj methods for PowerPC platform * implementations * @brief A set of methods required by all platform implementations. * These are used to bring up secondary CPUs, supply the physical memory * map, etc. *@{ */ INTERFACE platform; # # Default implementations # CODE { static void platform_null_attach(platform_t plat) { return; } static int platform_null_smp_first_cpu(platform_t plat, struct cpuref *cpuref) { cpuref->cr_hwref = -1; cpuref->cr_cpuid = 0; return (0); } static int platform_null_smp_next_cpu(platform_t plat, struct cpuref *_cpuref) { return (ENOENT); } static struct cpu_group *platform_null_smp_topo(platform_t plat) { #ifdef SMP return (smp_topo_none()); #else return (NULL); #endif } static vm_offset_t platform_null_real_maxaddr(platform_t plat) { return (VM_MAX_ADDRESS); } static void platform_null_smp_ap_init(platform_t plat) { return; } + static void platform_null_idle(platform_t plat, int cpu) + { + return; + } + static int platform_null_idle_wakeup(platform_t plat, int cpu) + { + return (0); + } }; /** * @brief Probe for whether we are on this platform, returning the standard * newbus probe codes. If we have Open Firmware or a flattened device tree, * it is guaranteed to be available at this point. */ METHOD int probe { platform_t _plat; }; /** * @brief Attach this platform module. This happens before the MMU is online, * so the platform module can install its own high-priority MMU module at * this point. */ METHOD int attach { platform_t _plat; } DEFAULT platform_null_attach; /** * @brief Return the system's physical memory map. * * It shall provide the total and the available regions of RAM. * The available regions need not take the kernel into account. * * @param _memp Array of physical memory chunks * @param _memsz Number of physical memory chunks * @param _availp Array of available physical memory chunks * @param _availsz Number of available physical memory chunks */ METHOD void mem_regions { platform_t _plat; struct mem_region *_memp; int *_memsz; struct mem_region *_availp; int *_availsz; }; /** * @brief Return the maximum address accessible in real mode * (for use with hypervisors) */ METHOD vm_offset_t real_maxaddr { platform_t _plat; } DEFAULT platform_null_real_maxaddr; /** * @brief Get the CPU's timebase frequency, in ticks per second. * * @param _cpu CPU whose timebase to query */ METHOD u_long timebase_freq { platform_t _plat; struct cpuref *_cpu; }; # SMP bits /** * @brief Fill the first CPU's cpuref * * @param _cpuref CPU */ METHOD int smp_first_cpu { platform_t _plat; struct cpuref *_cpuref; } DEFAULT platform_null_smp_first_cpu; /** * @brief Fill the next CPU's cpuref * * @param _cpuref CPU */ METHOD int smp_next_cpu { platform_t _plat; struct cpuref *_cpuref; } DEFAULT platform_null_smp_next_cpu; /** * @brief Find the boot processor * * @param _cpuref CPU */ METHOD int smp_get_bsp { platform_t _plat; struct cpuref *_cpuref; } DEFAULT platform_null_smp_first_cpu; /** * @brief Start a CPU * * @param _cpuref CPU */ METHOD int smp_start_cpu { platform_t _plat; struct pcpu *_cpu; }; /** * @brief Start a CPU * */ METHOD void smp_ap_init { platform_t _plat; } DEFAULT platform_null_smp_ap_init; /** * @brief Return SMP topology */ METHOD cpu_group_t smp_topo { platform_t _plat; } DEFAULT platform_null_smp_topo; /** * @brief Reset system */ METHOD void reset { platform_t _plat; }; + +/** + * @brief Idle a CPU + */ +METHOD void idle { + platform_t _plat; + int _cpu; +} DEFAULT platform_null_idle; + +/** + * @brief Wake up an idle CPU + */ +METHOD int idle_wakeup { + platform_t _plat; + int _cpu; +} DEFAULT platform_null_idle_wakeup; /** * @brief Suspend the CPU */ METHOD void sleep { platform_t _plat; }; Index: projects/clang380-import/sys =================================================================== --- projects/clang380-import/sys (revision 293035) +++ projects/clang380-import/sys (revision 293036) Property changes on: projects/clang380-import/sys ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head/sys:r293016-293035 Index: projects/clang380-import/tools/regression/geom_concat/conf.sh =================================================================== --- projects/clang380-import/tools/regression/geom_concat/conf.sh (revision 293035) +++ projects/clang380-import/tools/regression/geom_concat/conf.sh (revision 293036) @@ -1,8 +1,8 @@ #!/bin/sh # $FreeBSD$ -name="test" +name="$(mktemp -u concat.XXXXXX)" class="concat" base=`basename $0` . `dirname $0`/../geom_subr.sh Index: projects/clang380-import/tools/regression/geom_mirror/conf.sh =================================================================== --- projects/clang380-import/tools/regression/geom_mirror/conf.sh (revision 293035) +++ projects/clang380-import/tools/regression/geom_mirror/conf.sh (revision 293036) @@ -1,8 +1,8 @@ #!/bin/sh # $FreeBSD$ -name="test" +name="$(mktemp -u mirror.XXXXXX)" class="mirror" base=`basename $0` . `dirname $0`/../geom_subr.sh Index: projects/clang380-import/tools/regression/geom_raid3/conf.sh =================================================================== --- projects/clang380-import/tools/regression/geom_raid3/conf.sh (revision 293035) +++ projects/clang380-import/tools/regression/geom_raid3/conf.sh (revision 293036) @@ -1,8 +1,8 @@ #!/bin/sh # $FreeBSD$ -name="test" +name="$(mktemp -u graid3.XXXXXX)" class="raid3" base=`basename $0` . `dirname $0`/../geom_subr.sh Index: projects/clang380-import/tools/regression/geom_shsec/conf.sh =================================================================== --- projects/clang380-import/tools/regression/geom_shsec/conf.sh (revision 293035) +++ projects/clang380-import/tools/regression/geom_shsec/conf.sh (revision 293036) @@ -1,8 +1,8 @@ #!/bin/sh # $FreeBSD$ -name="test" +name="$(mktemp -u shsec.XXXXXX)" class="shsec" base=`basename $0` . `dirname $0`/../geom_subr.sh Index: projects/clang380-import/tools/regression/geom_stripe/conf.sh =================================================================== --- projects/clang380-import/tools/regression/geom_stripe/conf.sh (revision 293035) +++ projects/clang380-import/tools/regression/geom_stripe/conf.sh (revision 293036) @@ -1,8 +1,8 @@ #!/bin/sh # $FreeBSD$ -name="test" +name="$(mktemp -u stripe.XXXXXX)" class="stripe" base=`basename $0` . `dirname $0`/../geom_subr.sh Index: projects/clang380-import/tools/regression/geom_subr.sh =================================================================== --- projects/clang380-import/tools/regression/geom_subr.sh (revision 293035) +++ projects/clang380-import/tools/regression/geom_subr.sh (revision 293036) @@ -1,14 +1,48 @@ #!/bin/sh # $FreeBSD$ -kldstat -q -m g_${class} || g${class} load || exit 1 +if [ $(id -u) -ne 0 ]; then + echo 'Tests must be run as root' + echo 'Bail out!' + exit 1 +fi +kldstat -q -m g_${class} || geom ${class} load || exit 1 devwait() { while :; do if [ -c /dev/${class}/${name} ]; then return fi sleep 0.2 done +} + +# Need to keep track of the test md devices to avoid the scenario where a test +# failing will cause the other tests to bomb out, or a test failing will leave +# a large number of md(4) devices lingering around +: ${TMPDIR=/tmp} +export TMPDIR +TEST_MDS_FILE=${TMPDIR}/test_mds + +attach_md() +{ + local test_md + + test_md=$(mdconfig -a "$@") || exit + echo $test_md >> $TEST_MDS_FILE || exit + echo $test_md +} + +geom_test_cleanup() +{ + local test_md + + if [ -f $TEST_MDS_FILE ]; then + while read test_md; do + # The "#" tells the TAP parser this is a comment + echo "# Removing test memory disk: $test_md" + mdconfig -d -u $test_md + done < $TEST_MDS_FILE + fi } Index: projects/clang380-import =================================================================== --- projects/clang380-import (revision 293035) +++ projects/clang380-import (revision 293036) Property changes on: projects/clang380-import ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r293016-293035