Index: head/sys/net80211/ieee80211_freebsd.h =================================================================== --- head/sys/net80211/ieee80211_freebsd.h (revision 293021) +++ head/sys/net80211/ieee80211_freebsd.h (revision 293022) @@ -1,676 +1,678 @@ /*- * Copyright (c) 2003-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_FREEBSD_H_ #define _NET80211_IEEE80211_FREEBSD_H_ #ifdef _KERNEL #include #include #include #include #include #include #include #include /* * Common state locking definitions. */ typedef struct { char name[16]; /* e.g. "ath0_com_lock" */ struct mtx mtx; } ieee80211_com_lock_t; #define IEEE80211_LOCK_INIT(_ic, _name) do { \ ieee80211_com_lock_t *cl = &(_ic)->ic_comlock; \ snprintf(cl->name, sizeof(cl->name), "%s_com_lock", _name); \ mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF | MTX_RECURSE); \ } while (0) #define IEEE80211_LOCK_OBJ(_ic) (&(_ic)->ic_comlock.mtx) #define IEEE80211_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_LOCK_OBJ(_ic)) #define IEEE80211_LOCK(_ic) mtx_lock(IEEE80211_LOCK_OBJ(_ic)) #define IEEE80211_UNLOCK(_ic) mtx_unlock(IEEE80211_LOCK_OBJ(_ic)) #define IEEE80211_LOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_OWNED) #define IEEE80211_UNLOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_NOTOWNED) /* * Transmit lock. * * This is a (mostly) temporary lock designed to serialise all of the * transmission operations throughout the stack. */ typedef struct { char name[16]; /* e.g. "ath0_com_lock" */ struct mtx mtx; } ieee80211_tx_lock_t; #define IEEE80211_TX_LOCK_INIT(_ic, _name) do { \ ieee80211_tx_lock_t *cl = &(_ic)->ic_txlock; \ snprintf(cl->name, sizeof(cl->name), "%s_tx_lock", _name); \ mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF); \ } while (0) #define IEEE80211_TX_LOCK_OBJ(_ic) (&(_ic)->ic_txlock.mtx) #define IEEE80211_TX_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_TX_LOCK_OBJ(_ic)) #define IEEE80211_TX_LOCK(_ic) mtx_lock(IEEE80211_TX_LOCK_OBJ(_ic)) #define IEEE80211_TX_UNLOCK(_ic) mtx_unlock(IEEE80211_TX_LOCK_OBJ(_ic)) #define IEEE80211_TX_LOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_OWNED) #define IEEE80211_TX_UNLOCK_ASSERT(_ic) \ mtx_assert(IEEE80211_TX_LOCK_OBJ(_ic), MA_NOTOWNED) /* * Node locking definitions. */ typedef struct { char name[16]; /* e.g. "ath0_node_lock" */ struct mtx mtx; } ieee80211_node_lock_t; #define IEEE80211_NODE_LOCK_INIT(_nt, _name) do { \ ieee80211_node_lock_t *nl = &(_nt)->nt_nodelock; \ snprintf(nl->name, sizeof(nl->name), "%s_node_lock", _name); \ mtx_init(&nl->mtx, nl->name, NULL, MTX_DEF | MTX_RECURSE); \ } while (0) #define IEEE80211_NODE_LOCK_OBJ(_nt) (&(_nt)->nt_nodelock.mtx) #define IEEE80211_NODE_LOCK_DESTROY(_nt) \ mtx_destroy(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_LOCK(_nt) \ mtx_lock(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_IS_LOCKED(_nt) \ mtx_owned(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_UNLOCK(_nt) \ mtx_unlock(IEEE80211_NODE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_LOCK_ASSERT(_nt) \ mtx_assert(IEEE80211_NODE_LOCK_OBJ(_nt), MA_OWNED) /* * Node table iteration locking definitions; this protects the * scan generation # used to iterate over the station table * while grabbing+releasing the node lock. */ typedef struct { char name[16]; /* e.g. "ath0_scan_lock" */ struct mtx mtx; } ieee80211_scan_lock_t; #define IEEE80211_NODE_ITERATE_LOCK_INIT(_nt, _name) do { \ ieee80211_scan_lock_t *sl = &(_nt)->nt_scanlock; \ snprintf(sl->name, sizeof(sl->name), "%s_scan_lock", _name); \ mtx_init(&sl->mtx, sl->name, NULL, MTX_DEF); \ } while (0) #define IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt) (&(_nt)->nt_scanlock.mtx) #define IEEE80211_NODE_ITERATE_LOCK_DESTROY(_nt) \ mtx_destroy(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_ITERATE_LOCK(_nt) \ mtx_lock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) #define IEEE80211_NODE_ITERATE_UNLOCK(_nt) \ mtx_unlock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt)) /* * Power-save queue definitions. */ typedef struct mtx ieee80211_psq_lock_t; #define IEEE80211_PSQ_INIT(_psq, _name) \ mtx_init(&(_psq)->psq_lock, _name, "802.11 ps q", MTX_DEF) #define IEEE80211_PSQ_DESTROY(_psq) mtx_destroy(&(_psq)->psq_lock) #define IEEE80211_PSQ_LOCK(_psq) mtx_lock(&(_psq)->psq_lock) #define IEEE80211_PSQ_UNLOCK(_psq) mtx_unlock(&(_psq)->psq_lock) #ifndef IF_PREPEND_LIST #define _IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \ (mtail)->m_nextpkt = (ifq)->ifq_head; \ if ((ifq)->ifq_tail == NULL) \ (ifq)->ifq_tail = (mtail); \ (ifq)->ifq_head = (mhead); \ (ifq)->ifq_len += (mcount); \ } while (0) #define IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \ IF_LOCK(ifq); \ _IF_PREPEND_LIST(ifq, mhead, mtail, mcount); \ IF_UNLOCK(ifq); \ } while (0) #endif /* IF_PREPEND_LIST */ /* * Age queue definitions. */ typedef struct mtx ieee80211_ageq_lock_t; #define IEEE80211_AGEQ_INIT(_aq, _name) \ mtx_init(&(_aq)->aq_lock, _name, "802.11 age q", MTX_DEF) #define IEEE80211_AGEQ_DESTROY(_aq) mtx_destroy(&(_aq)->aq_lock) #define IEEE80211_AGEQ_LOCK(_aq) mtx_lock(&(_aq)->aq_lock) #define IEEE80211_AGEQ_UNLOCK(_aq) mtx_unlock(&(_aq)->aq_lock) /* * 802.1x MAC ACL database locking definitions. */ typedef struct mtx acl_lock_t; #define ACL_LOCK_INIT(_as, _name) \ mtx_init(&(_as)->as_lock, _name, "802.11 ACL", MTX_DEF) #define ACL_LOCK_DESTROY(_as) mtx_destroy(&(_as)->as_lock) #define ACL_LOCK(_as) mtx_lock(&(_as)->as_lock) #define ACL_UNLOCK(_as) mtx_unlock(&(_as)->as_lock) #define ACL_LOCK_ASSERT(_as) \ mtx_assert((&(_as)->as_lock), MA_OWNED) /* * Scan table definitions. */ typedef struct mtx ieee80211_scan_table_lock_t; #define IEEE80211_SCAN_TABLE_LOCK_INIT(_st, _name) \ mtx_init(&(_st)->st_lock, _name, "802.11 scan table", MTX_DEF) #define IEEE80211_SCAN_TABLE_LOCK_DESTROY(_st) mtx_destroy(&(_st)->st_lock) #define IEEE80211_SCAN_TABLE_LOCK(_st) mtx_lock(&(_st)->st_lock) #define IEEE80211_SCAN_TABLE_UNLOCK(_st) mtx_unlock(&(_st)->st_lock) typedef struct mtx ieee80211_scan_iter_lock_t; #define IEEE80211_SCAN_ITER_LOCK_INIT(_st, _name) \ mtx_init(&(_st)->st_scanlock, _name, "802.11 scangen", MTX_DEF) #define IEEE80211_SCAN_ITER_LOCK_DESTROY(_st) mtx_destroy(&(_st)->st_scanlock) #define IEEE80211_SCAN_ITER_LOCK(_st) mtx_lock(&(_st)->st_scanlock) #define IEEE80211_SCAN_ITER_UNLOCK(_st) mtx_unlock(&(_st)->st_scanlock) /* * Mesh node/routing definitions. */ typedef struct mtx ieee80211_rte_lock_t; #define MESH_RT_ENTRY_LOCK_INIT(_rt, _name) \ mtx_init(&(rt)->rt_lock, _name, "802.11s route entry", MTX_DEF) #define MESH_RT_ENTRY_LOCK_DESTROY(_rt) \ mtx_destroy(&(_rt)->rt_lock) #define MESH_RT_ENTRY_LOCK(rt) mtx_lock(&(rt)->rt_lock) #define MESH_RT_ENTRY_LOCK_ASSERT(rt) mtx_assert(&(rt)->rt_lock, MA_OWNED) #define MESH_RT_ENTRY_UNLOCK(rt) mtx_unlock(&(rt)->rt_lock) typedef struct mtx ieee80211_rt_lock_t; #define MESH_RT_LOCK(ms) mtx_lock(&(ms)->ms_rt_lock) #define MESH_RT_LOCK_ASSERT(ms) mtx_assert(&(ms)->ms_rt_lock, MA_OWNED) #define MESH_RT_UNLOCK(ms) mtx_unlock(&(ms)->ms_rt_lock) #define MESH_RT_LOCK_INIT(ms, name) \ mtx_init(&(ms)->ms_rt_lock, name, "802.11s routing table", MTX_DEF) #define MESH_RT_LOCK_DESTROY(ms) \ mtx_destroy(&(ms)->ms_rt_lock) /* * Node reference counting definitions. * * ieee80211_node_initref initialize the reference count to 1 * ieee80211_node_incref add a reference * ieee80211_node_decref remove a reference * ieee80211_node_dectestref remove a reference and return 1 if this * is the last reference, otherwise 0 * ieee80211_node_refcnt reference count for printing (only) */ #include #define ieee80211_node_initref(_ni) \ do { ((_ni)->ni_refcnt = 1); } while (0) #define ieee80211_node_incref(_ni) \ atomic_add_int(&(_ni)->ni_refcnt, 1) #define ieee80211_node_decref(_ni) \ atomic_subtract_int(&(_ni)->ni_refcnt, 1) struct ieee80211_node; int ieee80211_node_dectestref(struct ieee80211_node *ni); #define ieee80211_node_refcnt(_ni) (_ni)->ni_refcnt struct ifqueue; struct ieee80211vap; void ieee80211_drain_ifq(struct ifqueue *); void ieee80211_flush_ifq(struct ifqueue *, struct ieee80211vap *); void ieee80211_vap_destroy(struct ieee80211vap *); #define IFNET_IS_UP_RUNNING(_ifp) \ (((_ifp)->if_flags & IFF_UP) && \ ((_ifp)->if_drv_flags & IFF_DRV_RUNNING)) +/* XXX TODO: cap these at 1, as hz may not be 1000 */ #define msecs_to_ticks(ms) (((ms)*hz)/1000) #define ticks_to_msecs(t) (1000*(t) / hz) #define ticks_to_secs(t) ((t) / hz) + #define time_after(a,b) ((long)(b) - (long)(a) < 0) #define time_before(a,b) time_after(b,a) #define time_after_eq(a,b) ((long)(a) - (long)(b) >= 0) #define time_before_eq(a,b) time_after_eq(b,a) struct mbuf *ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen); /* tx path usage */ #define M_ENCAP M_PROTO1 /* 802.11 encap done */ #define M_EAPOL M_PROTO3 /* PAE/EAPOL frame */ #define M_PWR_SAV M_PROTO4 /* bypass PS handling */ #define M_MORE_DATA M_PROTO5 /* more data frames to follow */ #define M_FF M_PROTO6 /* fast frame */ #define M_TXCB M_PROTO7 /* do tx complete callback */ #define M_AMPDU_MPDU M_PROTO8 /* ok for A-MPDU aggregation */ #define M_FRAG M_PROTO9 /* frame fragmentation */ #define M_FIRSTFRAG M_PROTO10 /* first frame fragment */ #define M_LASTFRAG M_PROTO11 /* last frame fragment */ #define M_80211_TX \ (M_ENCAP|M_EAPOL|M_PWR_SAV|M_MORE_DATA|M_FF|M_TXCB| \ M_AMPDU_MPDU|M_FRAG|M_FIRSTFRAG|M_LASTFRAG) /* rx path usage */ #define M_AMPDU M_PROTO1 /* A-MPDU subframe */ #define M_WEP M_PROTO2 /* WEP done by hardware */ #if 0 #define M_AMPDU_MPDU M_PROTO8 /* A-MPDU re-order done */ #endif #define M_80211_RX (M_AMPDU|M_WEP|M_AMPDU_MPDU) #define IEEE80211_MBUF_TX_FLAG_BITS \ M_FLAG_BITS \ "\15M_ENCAP\17M_EAPOL\20M_PWR_SAV\21M_MORE_DATA\22M_FF\23M_TXCB" \ "\24M_AMPDU_MPDU\25M_FRAG\26M_FIRSTFRAG\27M_LASTFRAG" #define IEEE80211_MBUF_RX_FLAG_BITS \ M_FLAG_BITS \ "\15M_AMPDU\16M_WEP\24M_AMPDU_MPDU" /* * Store WME access control bits in the vlan tag. * This is safe since it's done after the packet is classified * (where we use any previous tag) and because it's passed * directly in to the driver and there's no chance someone * else will clobber them on us. */ #define M_WME_SETAC(m, ac) \ ((m)->m_pkthdr.ether_vtag = (ac)) #define M_WME_GETAC(m) ((m)->m_pkthdr.ether_vtag) /* * Mbufs on the power save queue are tagged with an age and * timed out. We reuse the hardware checksum field in the * mbuf packet header to store this data. */ #define M_AGE_SET(m,v) (m->m_pkthdr.csum_data = v) #define M_AGE_GET(m) (m->m_pkthdr.csum_data) #define M_AGE_SUB(m,adj) (m->m_pkthdr.csum_data -= adj) /* * Store the sequence number. */ #define M_SEQNO_SET(m, seqno) \ ((m)->m_pkthdr.tso_segsz = (seqno)) #define M_SEQNO_GET(m) ((m)->m_pkthdr.tso_segsz) #define MTAG_ABI_NET80211 1132948340 /* net80211 ABI */ struct ieee80211_cb { void (*func)(struct ieee80211_node *, void *, int status); void *arg; }; #define NET80211_TAG_CALLBACK 0 /* xmit complete callback */ int ieee80211_add_callback(struct mbuf *m, void (*func)(struct ieee80211_node *, void *, int), void *arg); void ieee80211_process_callback(struct ieee80211_node *, struct mbuf *, int); #define NET80211_TAG_XMIT_PARAMS 1 /* See below; this is after the bpf_params definition */ #define NET80211_TAG_RECV_PARAMS 2 struct ieee80211com; int ieee80211_parent_xmitpkt(struct ieee80211com *, struct mbuf *); int ieee80211_vap_xmitpkt(struct ieee80211vap *, struct mbuf *); void get_random_bytes(void *, size_t); void ieee80211_sysctl_attach(struct ieee80211com *); void ieee80211_sysctl_detach(struct ieee80211com *); void ieee80211_sysctl_vattach(struct ieee80211vap *); void ieee80211_sysctl_vdetach(struct ieee80211vap *); SYSCTL_DECL(_net_wlan); int ieee80211_sysctl_msecs_ticks(SYSCTL_HANDLER_ARGS); void ieee80211_load_module(const char *); /* * A "policy module" is an adjunct module to net80211 that provides * functionality that typically includes policy decisions. This * modularity enables extensibility and vendor-supplied functionality. */ #define _IEEE80211_POLICY_MODULE(policy, name, version) \ typedef void (*policy##_setup)(int); \ SET_DECLARE(policy##_set, policy##_setup); \ static int \ wlan_##name##_modevent(module_t mod, int type, void *unused) \ { \ policy##_setup * const *iter, f; \ switch (type) { \ case MOD_LOAD: \ SET_FOREACH(iter, policy##_set) { \ f = (void*) *iter; \ f(type); \ } \ return 0; \ case MOD_UNLOAD: \ case MOD_QUIESCE: \ if (nrefs) { \ printf("wlan_" #name ": still in use " \ "(%u dynamic refs)\n", nrefs); \ return EBUSY; \ } \ if (type == MOD_UNLOAD) { \ SET_FOREACH(iter, policy##_set) { \ f = (void*) *iter; \ f(type); \ } \ } \ return 0; \ } \ return EINVAL; \ } \ static moduledata_t name##_mod = { \ "wlan_" #name, \ wlan_##name##_modevent, \ 0 \ }; \ DECLARE_MODULE(wlan_##name, name##_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST);\ MODULE_VERSION(wlan_##name, version); \ MODULE_DEPEND(wlan_##name, wlan, 1, 1, 1) /* * Crypto modules implement cipher support. */ #define IEEE80211_CRYPTO_MODULE(name, version) \ _IEEE80211_POLICY_MODULE(crypto, name, version); \ static void \ name##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_crypto_register(&name); \ else \ ieee80211_crypto_unregister(&name); \ } \ TEXT_SET(crypto##_set, name##_modevent) /* * Scanner modules provide scanning policy. */ #define IEEE80211_SCANNER_MODULE(name, version) \ _IEEE80211_POLICY_MODULE(scanner, name, version) #define IEEE80211_SCANNER_ALG(name, alg, v) \ static void \ name##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_scanner_register(alg, &v); \ else \ ieee80211_scanner_unregister(alg, &v); \ } \ TEXT_SET(scanner_set, name##_modevent); \ /* * ACL modules implement acl policy. */ #define IEEE80211_ACL_MODULE(name, alg, version) \ _IEEE80211_POLICY_MODULE(acl, name, version); \ static void \ alg##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_aclator_register(&alg); \ else \ ieee80211_aclator_unregister(&alg); \ } \ TEXT_SET(acl_set, alg##_modevent); \ /* * Authenticator modules handle 802.1x/WPA authentication. */ #define IEEE80211_AUTH_MODULE(name, version) \ _IEEE80211_POLICY_MODULE(auth, name, version) #define IEEE80211_AUTH_ALG(name, alg, v) \ static void \ name##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_authenticator_register(alg, &v); \ else \ ieee80211_authenticator_unregister(alg); \ } \ TEXT_SET(auth_set, name##_modevent) /* * Rate control modules provide tx rate control support. */ #define IEEE80211_RATECTL_MODULE(alg, version) \ _IEEE80211_POLICY_MODULE(ratectl, alg, version); \ #define IEEE80211_RATECTL_ALG(name, alg, v) \ static void \ alg##_modevent(int type) \ { \ if (type == MOD_LOAD) \ ieee80211_ratectl_register(alg, &v); \ else \ ieee80211_ratectl_unregister(alg); \ } \ TEXT_SET(ratectl##_set, alg##_modevent) struct ieee80211req; typedef int ieee80211_ioctl_getfunc(struct ieee80211vap *, struct ieee80211req *); SET_DECLARE(ieee80211_ioctl_getset, ieee80211_ioctl_getfunc); #define IEEE80211_IOCTL_GET(_name, _get) TEXT_SET(ieee80211_ioctl_getset, _get) typedef int ieee80211_ioctl_setfunc(struct ieee80211vap *, struct ieee80211req *); SET_DECLARE(ieee80211_ioctl_setset, ieee80211_ioctl_setfunc); #define IEEE80211_IOCTL_SET(_name, _set) TEXT_SET(ieee80211_ioctl_setset, _set) #endif /* _KERNEL */ /* XXX this stuff belongs elsewhere */ /* * Message formats for messages from the net80211 layer to user * applications via the routing socket. These messages are appended * to an if_announcemsghdr structure. */ struct ieee80211_join_event { uint8_t iev_addr[6]; }; struct ieee80211_leave_event { uint8_t iev_addr[6]; }; struct ieee80211_replay_event { uint8_t iev_src[6]; /* src MAC */ uint8_t iev_dst[6]; /* dst MAC */ uint8_t iev_cipher; /* cipher type */ uint8_t iev_keyix; /* key id/index */ uint64_t iev_keyrsc; /* RSC from key */ uint64_t iev_rsc; /* RSC from frame */ }; struct ieee80211_michael_event { uint8_t iev_src[6]; /* src MAC */ uint8_t iev_dst[6]; /* dst MAC */ uint8_t iev_cipher; /* cipher type */ uint8_t iev_keyix; /* key id/index */ }; struct ieee80211_wds_event { uint8_t iev_addr[6]; }; struct ieee80211_csa_event { uint32_t iev_flags; /* channel flags */ uint16_t iev_freq; /* setting in Mhz */ uint8_t iev_ieee; /* IEEE channel number */ uint8_t iev_mode; /* CSA mode */ uint8_t iev_count; /* CSA count */ }; struct ieee80211_cac_event { uint32_t iev_flags; /* channel flags */ uint16_t iev_freq; /* setting in Mhz */ uint8_t iev_ieee; /* IEEE channel number */ /* XXX timestamp? */ uint8_t iev_type; /* IEEE80211_NOTIFY_CAC_* */ }; struct ieee80211_radar_event { uint32_t iev_flags; /* channel flags */ uint16_t iev_freq; /* setting in Mhz */ uint8_t iev_ieee; /* IEEE channel number */ /* XXX timestamp? */ }; struct ieee80211_auth_event { uint8_t iev_addr[6]; }; struct ieee80211_deauth_event { uint8_t iev_addr[6]; }; struct ieee80211_country_event { uint8_t iev_addr[6]; uint8_t iev_cc[2]; /* ISO country code */ }; struct ieee80211_radio_event { uint8_t iev_state; /* 1 on, 0 off */ }; #define RTM_IEEE80211_ASSOC 100 /* station associate (bss mode) */ #define RTM_IEEE80211_REASSOC 101 /* station re-associate (bss mode) */ #define RTM_IEEE80211_DISASSOC 102 /* station disassociate (bss mode) */ #define RTM_IEEE80211_JOIN 103 /* station join (ap mode) */ #define RTM_IEEE80211_LEAVE 104 /* station leave (ap mode) */ #define RTM_IEEE80211_SCAN 105 /* scan complete, results available */ #define RTM_IEEE80211_REPLAY 106 /* sequence counter replay detected */ #define RTM_IEEE80211_MICHAEL 107 /* Michael MIC failure detected */ #define RTM_IEEE80211_REJOIN 108 /* station re-associate (ap mode) */ #define RTM_IEEE80211_WDS 109 /* WDS discovery (ap mode) */ #define RTM_IEEE80211_CSA 110 /* Channel Switch Announcement event */ #define RTM_IEEE80211_RADAR 111 /* radar event */ #define RTM_IEEE80211_CAC 112 /* Channel Availability Check event */ #define RTM_IEEE80211_DEAUTH 113 /* station deauthenticate */ #define RTM_IEEE80211_AUTH 114 /* station authenticate (ap mode) */ #define RTM_IEEE80211_COUNTRY 115 /* discovered country code (sta mode) */ #define RTM_IEEE80211_RADIO 116 /* RF kill switch state change */ /* * Structure prepended to raw packets sent through the bpf * interface when set to DLT_IEEE802_11_RADIO. This allows * user applications to specify pretty much everything in * an Atheros tx descriptor. XXX need to generalize. * * XXX cannot be more than 14 bytes as it is copied to a sockaddr's * XXX sa_data area. */ struct ieee80211_bpf_params { uint8_t ibp_vers; /* version */ #define IEEE80211_BPF_VERSION 0 uint8_t ibp_len; /* header length in bytes */ uint8_t ibp_flags; #define IEEE80211_BPF_SHORTPRE 0x01 /* tx with short preamble */ #define IEEE80211_BPF_NOACK 0x02 /* tx with no ack */ #define IEEE80211_BPF_CRYPTO 0x04 /* tx with h/w encryption */ #define IEEE80211_BPF_FCS 0x10 /* frame incldues FCS */ #define IEEE80211_BPF_DATAPAD 0x20 /* frame includes data padding */ #define IEEE80211_BPF_RTS 0x40 /* tx with RTS/CTS */ #define IEEE80211_BPF_CTS 0x80 /* tx with CTS only */ uint8_t ibp_pri; /* WME/WMM AC+tx antenna */ uint8_t ibp_try0; /* series 1 try count */ uint8_t ibp_rate0; /* series 1 IEEE tx rate */ uint8_t ibp_power; /* tx power (device units) */ uint8_t ibp_ctsrate; /* IEEE tx rate for CTS */ uint8_t ibp_try1; /* series 2 try count */ uint8_t ibp_rate1; /* series 2 IEEE tx rate */ uint8_t ibp_try2; /* series 3 try count */ uint8_t ibp_rate2; /* series 3 IEEE tx rate */ uint8_t ibp_try3; /* series 4 try count */ uint8_t ibp_rate3; /* series 4 IEEE tx rate */ }; #ifdef _KERNEL struct ieee80211_tx_params { struct ieee80211_bpf_params params; }; int ieee80211_add_xmit_params(struct mbuf *m, const struct ieee80211_bpf_params *); int ieee80211_get_xmit_params(struct mbuf *m, struct ieee80211_bpf_params *); #define IEEE80211_MAX_CHAINS 3 #define IEEE80211_MAX_EVM_PILOTS 6 #define IEEE80211_R_NF 0x0000001 /* global NF value valid */ #define IEEE80211_R_RSSI 0x0000002 /* global RSSI value valid */ #define IEEE80211_R_C_CHAIN 0x0000004 /* RX chain count valid */ #define IEEE80211_R_C_NF 0x0000008 /* per-chain NF value valid */ #define IEEE80211_R_C_RSSI 0x0000010 /* per-chain RSSI value valid */ #define IEEE80211_R_C_EVM 0x0000020 /* per-chain EVM valid */ #define IEEE80211_R_C_HT40 0x0000040 /* RX'ed packet is 40mhz, pilots 4,5 valid */ #define IEEE80211_R_FREQ 0x0000080 /* Freq value populated, MHz */ #define IEEE80211_R_IEEE 0x0000100 /* IEEE value populated */ #define IEEE80211_R_BAND 0x0000200 /* Frequency band populated */ struct ieee80211_rx_stats { uint32_t r_flags; /* IEEE80211_R_* flags */ uint8_t c_chain; /* number of RX chains involved */ int16_t c_nf_ctl[IEEE80211_MAX_CHAINS]; /* per-chain NF */ int16_t c_nf_ext[IEEE80211_MAX_CHAINS]; /* per-chain NF */ int16_t c_rssi_ctl[IEEE80211_MAX_CHAINS]; /* per-chain RSSI */ int16_t c_rssi_ext[IEEE80211_MAX_CHAINS]; /* per-chain RSSI */ uint8_t nf; /* global NF */ uint8_t rssi; /* global RSSI */ uint8_t evm[IEEE80211_MAX_CHAINS][IEEE80211_MAX_EVM_PILOTS]; /* per-chain, per-pilot EVM values */ uint16_t c_freq; uint8_t c_ieee; }; struct ieee80211_rx_params { struct ieee80211_rx_stats params; }; int ieee80211_add_rx_params(struct mbuf *m, const struct ieee80211_rx_stats *rxs); int ieee80211_get_rx_params(struct mbuf *m, struct ieee80211_rx_stats *rxs); #endif /* _KERNEL */ /* * Malloc API. Other BSD operating systems have slightly * different malloc/free namings (eg DragonflyBSD.) */ #define IEEE80211_MALLOC malloc #define IEEE80211_FREE free /* XXX TODO: get rid of WAITOK, fix all the users of it? */ #define IEEE80211_M_NOWAIT M_NOWAIT #define IEEE80211_M_WAITOK M_WAITOK #define IEEE80211_M_ZERO M_ZERO /* XXX TODO: the type fields */ #endif /* _NET80211_IEEE80211_FREEBSD_H_ */ Index: head/sys/net80211/ieee80211_scan_sw.c =================================================================== --- head/sys/net80211/ieee80211_scan_sw.c (revision 293021) +++ head/sys/net80211/ieee80211_scan_sw.c (revision 293022) @@ -1,958 +1,958 @@ /*- * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 scanning support. */ #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include struct scan_state { struct ieee80211_scan_state base; /* public state */ u_int ss_iflags; /* flags used internally */ #define ISCAN_MINDWELL 0x0001 /* min dwell time reached */ #define ISCAN_DISCARD 0x0002 /* discard rx'd frames */ #define ISCAN_CANCEL 0x0004 /* cancel current scan */ #define ISCAN_ABORT 0x0008 /* end the scan immediately */ unsigned long ss_chanmindwell; /* min dwell on curchan */ unsigned long ss_scanend; /* time scan must stop */ u_int ss_duration; /* duration for next scan */ struct task ss_scan_task; /* scan execution */ struct cv ss_scan_cv; /* scan signal */ struct callout ss_scan_timer; /* scan timer */ }; #define SCAN_PRIVATE(ss) ((struct scan_state *) ss) /* * Amount of time to go off-channel during a background * scan. This value should be large enough to catch most * ap's but short enough that we can return on-channel * before our listen interval expires. * * XXX tunable * XXX check against configured listen interval */ #define IEEE80211_SCAN_OFFCHANNEL msecs_to_ticks(150) /* * Roaming-related defaults. RSSI thresholds are as returned by the * driver (.5dBm). Transmit rate thresholds are IEEE rate codes (i.e * .5M units) or MCS. */ /* rssi thresholds */ #define ROAM_RSSI_11A_DEFAULT 14 /* 11a bss */ #define ROAM_RSSI_11B_DEFAULT 14 /* 11b bss */ #define ROAM_RSSI_11BONLY_DEFAULT 14 /* 11b-only bss */ /* transmit rate thresholds */ #define ROAM_RATE_11A_DEFAULT 2*12 /* 11a bss */ #define ROAM_RATE_11B_DEFAULT 2*5 /* 11b bss */ #define ROAM_RATE_11BONLY_DEFAULT 2*1 /* 11b-only bss */ #define ROAM_RATE_HALF_DEFAULT 2*6 /* half-width 11a/g bss */ #define ROAM_RATE_QUARTER_DEFAULT 2*3 /* quarter-width 11a/g bss */ #define ROAM_MCS_11N_DEFAULT (1 | IEEE80211_RATE_MCS) /* 11n bss */ static void scan_curchan(struct ieee80211_scan_state *, unsigned long); static void scan_mindwell(struct ieee80211_scan_state *); static void scan_signal(void *); static void scan_task(void *, int); MALLOC_DEFINE(M_80211_SCAN, "80211scan", "802.11 scan state"); static void ieee80211_swscan_detach(struct ieee80211com *ic) { struct ieee80211_scan_state *ss = ic->ic_scan; if (ss != NULL) { IEEE80211_LOCK(ic); SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_ABORT; scan_signal(ss); IEEE80211_UNLOCK(ic); ieee80211_draintask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); callout_drain(&SCAN_PRIVATE(ss)->ss_scan_timer); KASSERT((ic->ic_flags & IEEE80211_F_SCAN) == 0, ("scan still running")); /* * For now, do the ss_ops detach here rather * than ieee80211_scan_detach(). * * I'll figure out how to cleanly split things up * at a later date. */ if (ss->ss_ops != NULL) { ss->ss_ops->scan_detach(ss); ss->ss_ops = NULL; } ic->ic_scan = NULL; IEEE80211_FREE(SCAN_PRIVATE(ss), M_80211_SCAN); } } static void ieee80211_swscan_vattach(struct ieee80211vap *vap) { /* nothing to do for now */ /* * TODO: all of the vap scan calls should be methods! */ } static void ieee80211_swscan_vdetach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_LOCK_ASSERT(ic); ss = ic->ic_scan; if (ss != NULL && ss->ss_vap == vap) { if (ic->ic_flags & IEEE80211_F_SCAN) { SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_ABORT; scan_signal(ss); } } } static void ieee80211_swscan_set_scan_duration(struct ieee80211vap *vap, u_int duration) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); /* NB: flush frames rx'd before 1st channel change */ SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_DISCARD; SCAN_PRIVATE(ss)->ss_duration = duration; } /* * Start a scan unless one is already going. */ static int ieee80211_swscan_start_scan_locked(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); if (ic->ic_flags & IEEE80211_F_CSAPENDING) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: scan inhibited by pending channel change\n", __func__); } else if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan, duration %u mindwell %u maxdwell %u, desired mode %s, %s%s%s%s%s%s\n" , __func__ , flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive" , duration, mindwell, maxdwell , ieee80211_phymode_name[vap->iv_des_mode] , flags & IEEE80211_SCAN_FLUSH ? "flush" : "append" , flags & IEEE80211_SCAN_NOPICK ? ", nopick" : "" , flags & IEEE80211_SCAN_NOJOIN ? ", nojoin" : "" , flags & IEEE80211_SCAN_NOBCAST ? ", nobcast" : "" , flags & IEEE80211_SCAN_PICK1ST ? ", pick1st" : "" , flags & IEEE80211_SCAN_ONCE ? ", once" : "" ); ieee80211_scan_update_locked(vap, scan); if (ss->ss_ops != NULL) { if ((flags & IEEE80211_SCAN_NOSSID) == 0) ieee80211_scan_copy_ssid(vap, ss, nssid, ssids); /* NB: top 4 bits for internal use */ ss->ss_flags = flags & 0xfff; if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) vap->iv_stats.is_scan_active++; else vap->iv_stats.is_scan_passive++; if (flags & IEEE80211_SCAN_FLUSH) ss->ss_ops->scan_flush(ss); if (flags & IEEE80211_SCAN_BGSCAN) ic->ic_flags_ext |= IEEE80211_FEXT_BGSCAN; /* Set duration for this particular scan */ ieee80211_swscan_set_scan_duration(vap, duration); ss->ss_next = 0; ss->ss_mindwell = mindwell; ss->ss_maxdwell = maxdwell; /* NB: scan_start must be before the scan runtask */ ss->ss_ops->scan_start(ss, vap); #ifdef IEEE80211_DEBUG if (ieee80211_msg_scan(vap)) ieee80211_scan_dump(ss); #endif /* IEEE80211_DEBUG */ ic->ic_flags |= IEEE80211_F_SCAN; /* Start scan task */ ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); } return 1; } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan already in progress\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); } return 0; } /* * Start a scan unless one is already going. * * Called without the comlock held; grab the comlock as appropriate. */ static int ieee80211_swscan_start_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; int result; IEEE80211_UNLOCK_ASSERT(ic); IEEE80211_LOCK(ic); result = ieee80211_swscan_start_scan_locked(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); IEEE80211_UNLOCK(ic); return result; } /* * Check the scan cache for an ap/channel to use; if that * fails then kick off a new scan. * * Called with the comlock held. * * XXX TODO: split out! */ static int ieee80211_swscan_check_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; int result; IEEE80211_LOCK_ASSERT(ic); if (ss->ss_ops != NULL) { /* XXX verify ss_ops matches vap->iv_opmode */ if ((flags & IEEE80211_SCAN_NOSSID) == 0) { /* * Update the ssid list and mark flags so if * we call start_scan it doesn't duplicate work. */ ieee80211_scan_copy_ssid(vap, ss, nssid, ssids); flags |= IEEE80211_SCAN_NOSSID; } if ((ic->ic_flags & IEEE80211_F_SCAN) == 0 && (flags & IEEE80211_SCAN_FLUSH) == 0 && time_before(ticks, ic->ic_lastscan + vap->iv_scanvalid)) { /* * We're not currently scanning and the cache is * deemed hot enough to consult. Lock out others * by marking IEEE80211_F_SCAN while we decide if * something is already in the scan cache we can * use. Also discard any frames that might come * in while temporarily marked as scanning. */ SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_DISCARD; ic->ic_flags |= IEEE80211_F_SCAN; /* NB: need to use supplied flags in check */ ss->ss_flags = flags & 0xff; result = ss->ss_ops->scan_end(ss, vap); ic->ic_flags &= ~IEEE80211_F_SCAN; SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_DISCARD; if (result) { ieee80211_notify_scan_done(vap); return 1; } } } result = ieee80211_swscan_start_scan_locked(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); return result; } /* * Restart a previous scan. If the previous scan completed * then we start again using the existing channel list. */ static int ieee80211_swscan_bg_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; /* XXX assert unlocked? */ // IEEE80211_UNLOCK_ASSERT(ic); IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { u_int duration; /* * Go off-channel for a fixed interval that is large * enough to catch most ap's but short enough that * we can return on-channel before our listen interval * expires. */ duration = IEEE80211_SCAN_OFFCHANNEL; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan, ticks %u duration %lu\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive", ticks, duration); ieee80211_scan_update_locked(vap, scan); if (ss->ss_ops != NULL) { ss->ss_vap = vap; /* * A background scan does not select a new sta; it * just refreshes the scan cache. Also, indicate * the scan logic should follow the beacon schedule: * we go off-channel and scan for a while, then * return to the bss channel to receive a beacon, * then go off-channel again. All during this time * we notify the ap we're in power save mode. When * the scan is complete we leave power save mode. * If any beacon indicates there are frames pending * for us then we drop out of power save mode * (and background scan) automatically by way of the * usual sta power save logic. */ ss->ss_flags |= IEEE80211_SCAN_NOPICK | IEEE80211_SCAN_BGSCAN | flags ; /* if previous scan completed, restart */ if (ss->ss_next >= ss->ss_last) { if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) vap->iv_stats.is_scan_active++; else vap->iv_stats.is_scan_passive++; /* * NB: beware of the scan cache being flushed; * if the channel list is empty use the * scan_start method to populate it. */ ss->ss_next = 0; if (ss->ss_last != 0) ss->ss_ops->scan_restart(ss, vap); else { ss->ss_ops->scan_start(ss, vap); #ifdef IEEE80211_DEBUG if (ieee80211_msg_scan(vap)) ieee80211_scan_dump(ss); #endif /* IEEE80211_DEBUG */ } } ieee80211_swscan_set_scan_duration(vap, duration); ss->ss_maxdwell = duration; ic->ic_flags |= IEEE80211_F_SCAN; ic->ic_flags_ext |= IEEE80211_FEXT_BGSCAN; ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); } else { /* XXX msg+stat */ } } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan already in progress\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); } IEEE80211_UNLOCK(ic); /* NB: racey, does it matter? */ return (ic->ic_flags & IEEE80211_F_SCAN); } /* * Cancel any scan currently going on for the specified vap. */ static void ieee80211_swscan_cancel_scan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) && ss->ss_vap == vap && (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: cancel %s scan\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); /* clear bg scan NOPICK and mark cancel request */ ss->ss_flags &= ~IEEE80211_SCAN_NOPICK; SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_CANCEL; /* wake up the scan task */ scan_signal(ss); } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called; F_SCAN=%d, vap=%s, CANCEL=%d\n", __func__, !! (ic->ic_flags & IEEE80211_F_SCAN), (ss->ss_vap == vap ? "match" : "nomatch"), !! (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL)); } IEEE80211_UNLOCK(ic); } /* * Cancel any scan currently going on. */ static void ieee80211_swscan_cancel_anyscan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) && (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: cancel %s scan\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); /* clear bg scan NOPICK and mark cancel request */ ss->ss_flags &= ~IEEE80211_SCAN_NOPICK; SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_CANCEL; /* wake up the scan task */ scan_signal(ss); } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called; F_SCAN=%d, vap=%s, CANCEL=%d\n", __func__, !! (ic->ic_flags & IEEE80211_F_SCAN), (ss->ss_vap == vap ? "match" : "nomatch"), !! (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL)); } IEEE80211_UNLOCK(ic); } /* * Public access to scan_next for drivers that manage * scanning themselves (e.g. for firmware-based devices). */ static void ieee80211_swscan_scan_next(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__); /* wake up the scan task */ IEEE80211_LOCK(ic); scan_signal(ss); IEEE80211_UNLOCK(ic); } /* * Public access to scan_next for drivers that are not able to scan single * channels (e.g. for firmware-based devices). */ static void ieee80211_swscan_scan_done(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_LOCK_ASSERT(ic); ss = ic->ic_scan; scan_signal(ss); } /* * Probe the curent channel, if allowed, while scanning. * If the channel is not marked passive-only then send * a probe request immediately. Otherwise mark state and * listen for beacons on the channel; if we receive something * then we'll transmit a probe request. */ static void ieee80211_swscan_probe_curchan(struct ieee80211vap *vap, int force) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; struct ifnet *ifp = vap->iv_ifp; int i; /* * Send directed probe requests followed by any * broadcast probe request. * XXX remove dependence on ic/vap->iv_bss */ for (i = 0; i < ss->ss_nssid; i++) ieee80211_send_probereq(vap->iv_bss, vap->iv_myaddr, ifp->if_broadcastaddr, ifp->if_broadcastaddr, ss->ss_ssid[i].ssid, ss->ss_ssid[i].len); if ((ss->ss_flags & IEEE80211_SCAN_NOBCAST) == 0) ieee80211_send_probereq(vap->iv_bss, vap->iv_myaddr, ifp->if_broadcastaddr, ifp->if_broadcastaddr, "", 0); } /* * Scan curchan. If this is an active scan and the channel * is not marked passive then send probe request frame(s). * Arrange for the channel change after maxdwell ticks. */ static void scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell) { struct ieee80211vap *vap = ss->ss_vap; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: calling; maxdwell=%lu\n", __func__, maxdwell); IEEE80211_LOCK(vap->iv_ic); if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) ieee80211_probe_curchan(vap, 0); callout_reset(&SCAN_PRIVATE(ss)->ss_scan_timer, maxdwell, scan_signal, ss); IEEE80211_UNLOCK(vap->iv_ic); } static void scan_signal(void *arg) { struct ieee80211_scan_state *ss = (struct ieee80211_scan_state *) arg; IEEE80211_LOCK_ASSERT(ss->ss_ic); cv_signal(&SCAN_PRIVATE(ss)->ss_scan_cv); } /* * Handle mindwell requirements completed; initiate a channel * change to the next channel asap. */ static void scan_mindwell(struct ieee80211_scan_state *ss) { struct ieee80211com *ic = ss->ss_ic; IEEE80211_DPRINTF(ss->ss_vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__); IEEE80211_LOCK(ic); scan_signal(ss); IEEE80211_UNLOCK(ic); } static void scan_task(void *arg, int pending) { #define ISCAN_REP (ISCAN_MINDWELL | ISCAN_DISCARD) struct ieee80211_scan_state *ss = (struct ieee80211_scan_state *) arg; struct ieee80211vap *vap = ss->ss_vap; struct ieee80211com *ic = ss->ss_ic; struct ieee80211_channel *chan; unsigned long maxdwell, scanend; int scandone = 0; IEEE80211_LOCK(ic); if (vap == NULL || (ic->ic_flags & IEEE80211_F_SCAN) == 0 || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT)) { /* Cancelled before we started */ goto done; } if (ss->ss_next == ss->ss_last) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no channels to scan\n", __func__); scandone = 1; goto done; } if (vap->iv_opmode == IEEE80211_M_STA && vap->iv_state == IEEE80211_S_RUN) { if ((vap->iv_bss->ni_flags & IEEE80211_NODE_PWR_MGT) == 0) { /* Enable station power save mode */ vap->iv_sta_ps(vap, 1); /* * Use an 1ms delay so the null data frame has a chance * to go out. * XXX Should use M_TXCB mechanism to eliminate this. */ cv_timedwait(&SCAN_PRIVATE(ss)->ss_scan_cv, - IEEE80211_LOCK_OBJ(ic), hz / 1000); + IEEE80211_LOCK_OBJ(ic), msecs_to_ticks(1)); if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) goto done; } } scanend = ticks + SCAN_PRIVATE(ss)->ss_duration; /* XXX scan state can change! Re-validate scan state! */ IEEE80211_UNLOCK(ic); ic->ic_scan_start(ic); /* notify driver */ IEEE80211_LOCK(ic); for (;;) { scandone = (ss->ss_next >= ss->ss_last) || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: loop start; scandone=%d\n", __func__, scandone); if (scandone || (ss->ss_flags & IEEE80211_SCAN_GOTPICK) || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) || time_after(ticks + ss->ss_mindwell, scanend)) break; chan = ss->ss_chans[ss->ss_next++]; /* * Watch for truncation due to the scan end time. */ if (time_after(ticks + ss->ss_maxdwell, scanend)) maxdwell = scanend - ticks; else maxdwell = ss->ss_maxdwell; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: chan %3d%c -> %3d%c [%s, dwell min %lums max %lums]\n", __func__, ieee80211_chan2ieee(ic, ic->ic_curchan), ieee80211_channel_type_char(ic->ic_curchan), ieee80211_chan2ieee(ic, chan), ieee80211_channel_type_char(chan), (ss->ss_flags & IEEE80211_SCAN_ACTIVE) && (chan->ic_flags & IEEE80211_CHAN_PASSIVE) == 0 ? "active" : "passive", ticks_to_msecs(ss->ss_mindwell), ticks_to_msecs(maxdwell)); /* * Potentially change channel and phy mode. */ ic->ic_curchan = chan; ic->ic_rt = ieee80211_get_ratetable(chan); IEEE80211_UNLOCK(ic); /* * Perform the channel change and scan unlocked so the driver * may sleep. Once set_channel returns the hardware has * completed the channel change. */ ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); /* * Scan curchan. Drivers for "intelligent hardware" * override ic_scan_curchan to tell the device to do * the work. Otherwise we manage the work outselves; * sending a probe request (as needed), and arming the * timeout to switch channels after maxdwell ticks. * * scan_curchan should only pause for the time required to * prepare/initiate the hardware for the scan (if at all), the * below condvar is used to sleep for the channels dwell time * and allows it to be signalled for abort. */ ic->ic_scan_curchan(ss, maxdwell); IEEE80211_LOCK(ic); /* XXX scan state can change! Re-validate scan state! */ SCAN_PRIVATE(ss)->ss_chanmindwell = ticks + ss->ss_mindwell; /* clear mindwell lock and initial channel change flush */ SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_REP; if ((SCAN_PRIVATE(ss)->ss_iflags & (ISCAN_CANCEL|ISCAN_ABORT))) continue; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: waiting\n", __func__); /* Wait to be signalled to scan the next channel */ cv_wait(&SCAN_PRIVATE(ss)->ss_scan_cv, IEEE80211_LOCK_OBJ(ic)); } IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: out\n", __func__); if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) goto done; IEEE80211_UNLOCK(ic); ic->ic_scan_end(ic); /* notify driver */ IEEE80211_LOCK(ic); /* XXX scan state can change! Re-validate scan state! */ /* * Since a cancellation may have occured during one of the * driver calls (whilst unlocked), update scandone. */ if (scandone == 0 && ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0)) { /* XXX printf? */ if_printf(vap->iv_ifp, "%s: OOPS! scan cancelled during driver call (1)!\n", __func__); scandone = 1; } /* * Record scan complete time. Note that we also do * this when canceled so any background scan will * not be restarted for a while. */ if (scandone) ic->ic_lastscan = ticks; /* return to the bss channel */ if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && ic->ic_curchan != ic->ic_bsschan) { ieee80211_setupcurchan(ic, ic->ic_bsschan); IEEE80211_UNLOCK(ic); ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); IEEE80211_LOCK(ic); } /* clear internal flags and any indication of a pick */ SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_REP; ss->ss_flags &= ~IEEE80211_SCAN_GOTPICK; /* * If not canceled and scan completed, do post-processing. * If the callback function returns 0, then it wants to * continue/restart scanning. Unfortunately we needed to * notify the driver to end the scan above to avoid having * rx frames alter the scan candidate list. */ if ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0 && !ss->ss_ops->scan_end(ss, vap) && (ss->ss_flags & IEEE80211_SCAN_ONCE) == 0 && time_before(ticks + ss->ss_mindwell, scanend)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: done, restart " "[ticks %u, dwell min %lu scanend %lu]\n", __func__, ticks, ss->ss_mindwell, scanend); ss->ss_next = 0; /* reset to begining */ if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) vap->iv_stats.is_scan_active++; else vap->iv_stats.is_scan_passive++; ss->ss_ops->scan_restart(ss, vap); /* XXX? */ ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); IEEE80211_UNLOCK(ic); return; } /* past here, scandone is ``true'' if not in bg mode */ if ((ss->ss_flags & IEEE80211_SCAN_BGSCAN) == 0) scandone = 1; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s, [ticks %u, dwell min %lu scanend %lu]\n", __func__, scandone ? "done" : "stopped", ticks, ss->ss_mindwell, scanend); /* * Since a cancellation may have occured during one of the * driver calls (whilst unlocked), update scandone. */ if (scandone == 0 && ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0)) { /* XXX printf? */ if_printf(vap->iv_ifp, "%s: OOPS! scan cancelled during driver call (2)!\n", __func__); scandone = 1; } /* * Clear the SCAN bit first in case frames are * pending on the station power save queue. If * we defer this then the dispatch of the frames * may generate a request to cancel scanning. */ done: ic->ic_flags &= ~IEEE80211_F_SCAN; /* * Drop out of power save mode when a scan has * completed. If this scan was prematurely terminated * because it is a background scan then don't notify * the ap; we'll either return to scanning after we * receive the beacon frame or we'll drop out of power * save mode because the beacon indicates we have frames * waiting for us. */ if (scandone) { vap->iv_sta_ps(vap, 0); if (ss->ss_next >= ss->ss_last) { ieee80211_notify_scan_done(vap); ic->ic_flags_ext &= ~IEEE80211_FEXT_BGSCAN; } } SCAN_PRIVATE(ss)->ss_iflags &= ~(ISCAN_CANCEL|ISCAN_ABORT); ss->ss_flags &= ~(IEEE80211_SCAN_ONCE | IEEE80211_SCAN_PICK1ST); IEEE80211_UNLOCK(ic); #undef ISCAN_REP } /* * Process a beacon or probe response frame. */ static void ieee80211_swscan_add_scan(struct ieee80211vap *vap, struct ieee80211_channel *curchan, const struct ieee80211_scanparams *sp, const struct ieee80211_frame *wh, int subtype, int rssi, int noise) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; /* XXX locking */ /* * Frames received during startup are discarded to avoid * using scan state setup on the initial entry to the timer * callback. This can occur because the device may enable * rx prior to our doing the initial channel change in the * timer routine. */ if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_DISCARD) return; #ifdef IEEE80211_DEBUG if (ieee80211_msg_scan(vap) && (ic->ic_flags & IEEE80211_F_SCAN)) ieee80211_scan_dump_probe_beacon(subtype, 1, wh->i_addr2, sp, rssi); #endif if (ss->ss_ops != NULL && ss->ss_ops->scan_add(ss, curchan, sp, wh, subtype, rssi, noise)) { /* * If we've reached the min dwell time terminate * the timer so we'll switch to the next channel. */ if ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_MINDWELL) == 0 && time_after_eq(ticks, SCAN_PRIVATE(ss)->ss_chanmindwell)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: chan %3d%c min dwell met (%u > %lu)\n", __func__, ieee80211_chan2ieee(ic, ic->ic_curchan), ieee80211_channel_type_char(ic->ic_curchan), ticks, SCAN_PRIVATE(ss)->ss_chanmindwell); SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_MINDWELL; /* * NB: trigger at next clock tick or wait for the * hardware. */ ic->ic_scan_mindwell(ss); } } } static struct ieee80211_scan_methods swscan_methods = { .sc_attach = ieee80211_swscan_attach, .sc_detach = ieee80211_swscan_detach, .sc_vattach = ieee80211_swscan_vattach, .sc_vdetach = ieee80211_swscan_vdetach, .sc_set_scan_duration = ieee80211_swscan_set_scan_duration, .sc_start_scan = ieee80211_swscan_start_scan, .sc_check_scan = ieee80211_swscan_check_scan, .sc_bg_scan = ieee80211_swscan_bg_scan, .sc_cancel_scan = ieee80211_swscan_cancel_scan, .sc_cancel_anyscan = ieee80211_swscan_cancel_anyscan, .sc_scan_next = ieee80211_swscan_scan_next, .sc_scan_done = ieee80211_swscan_scan_done, .sc_scan_probe_curchan = ieee80211_swscan_probe_curchan, .sc_add_scan = ieee80211_swscan_add_scan }; /* * Default scan attach method. */ void ieee80211_swscan_attach(struct ieee80211com *ic) { struct scan_state *ss; /* * Setup the default methods */ ic->ic_scan_methods = &swscan_methods; /* Allocate initial scan state */ ss = (struct scan_state *) IEEE80211_MALLOC(sizeof(struct scan_state), M_80211_SCAN, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); if (ss == NULL) { ic->ic_scan = NULL; return; } callout_init_mtx(&ss->ss_scan_timer, IEEE80211_LOCK_OBJ(ic), 0); cv_init(&ss->ss_scan_cv, "scan"); TASK_INIT(&ss->ss_scan_task, 0, scan_task, ss); ic->ic_scan = &ss->base; ss->base.ss_ic = ic; ic->ic_scan_curchan = scan_curchan; ic->ic_scan_mindwell = scan_mindwell; } Index: head/sys/net80211/ieee80211_var.h =================================================================== --- head/sys/net80211/ieee80211_var.h (revision 293021) +++ head/sys/net80211/ieee80211_var.h (revision 293022) @@ -1,1001 +1,1002 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_VAR_H_ #define _NET80211_IEEE80211_VAR_H_ /* * Definitions for IEEE 802.11 drivers. */ /* NB: portability glue must go first */ #if defined(__NetBSD__) #include #elif defined(__FreeBSD__) #include #elif defined(__linux__) #include #else #error "No support for your operating system!" #endif #include #include #include #include #include #include /* for ieee80211_stats */ #include #include #include #include #include #include #define IEEE80211_TXPOWER_MAX 100 /* .5 dBm (XXX units?) */ #define IEEE80211_TXPOWER_MIN 0 /* kill radio */ #define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */ #define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */ #define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */ #define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */ #define IEEE80211_BGSCAN_INTVAL_MIN 15 /* min bg scan intvl (secs) */ #define IEEE80211_BGSCAN_INTVAL_DEFAULT (5*60) /* default bg scan intvl */ #define IEEE80211_BGSCAN_IDLE_MIN 100 /* min idle time (ms) */ #define IEEE80211_BGSCAN_IDLE_DEFAULT 250 /* default idle time (ms) */ #define IEEE80211_SCAN_VALID_MIN 10 /* min scan valid time (secs) */ #define IEEE80211_SCAN_VALID_DEFAULT 60 /* default scan valid time */ #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ #define IEEE80211_FIXED_RATE_NONE 0xff #define IEEE80211_TXMAX_DEFAULT 6 /* default ucast max retries */ #define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX #define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024) #define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000) +/* XXX TODO: cap this at 1, in case hz is not 1000 */ #define IEEE80211_TU_TO_TICKS(x)(((x) * 1024 * hz) / (1000 * 1000)) /* * 802.11 control state is split into a common portion that maps * 1-1 to a physical device and one or more "Virtual AP's" (VAP) * that are bound to an ieee80211com instance and share a single * underlying device. Each VAP has a corresponding OS device * entity through which traffic flows and that applications use * for issuing ioctls, etc. */ /* * Data common to one or more virtual AP's. State shared by * the underlying device and the net80211 layer is exposed here; * e.g. device-specific callbacks. */ struct ieee80211vap; typedef void (*ieee80211vap_attach)(struct ieee80211vap *); struct ieee80211_appie { uint16_t ie_len; /* size of ie_data */ uint8_t ie_data[]; /* user-specified IE's */ }; struct ieee80211_tdma_param; struct ieee80211_rate_table; struct ieee80211_tx_ampdu; struct ieee80211_rx_ampdu; struct ieee80211_superg; struct ieee80211_frame; struct ieee80211com { void *ic_softc; /* driver softc */ const char *ic_name; /* usually device name */ ieee80211_com_lock_t ic_comlock; /* state update lock */ ieee80211_tx_lock_t ic_txlock; /* ic/vap TX lock */ LIST_ENTRY(ieee80211com) ic_next; /* on global list */ TAILQ_HEAD(, ieee80211vap) ic_vaps; /* list of vap instances */ int ic_headroom; /* driver tx headroom needs */ enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */ enum ieee80211_opmode ic_opmode; /* operation mode */ struct callout ic_inact; /* inactivity processing */ struct taskqueue *ic_tq; /* deferred state thread */ struct task ic_parent_task; /* deferred parent processing */ struct task ic_promisc_task;/* deferred promisc update */ struct task ic_mcast_task; /* deferred mcast update */ struct task ic_chan_task; /* deferred channel change */ struct task ic_bmiss_task; /* deferred beacon miss hndlr */ struct task ic_chw_task; /* deferred HT CHW update */ struct task ic_wme_task; /* deferred WME update */ struct task ic_restart_task; /* deferred device restart */ counter_u64_t ic_ierrors; /* input errors */ counter_u64_t ic_oerrors; /* output errors */ uint32_t ic_flags; /* state flags */ uint32_t ic_flags_ext; /* extended state flags */ uint32_t ic_flags_ht; /* HT state flags */ uint32_t ic_flags_ven; /* vendor state flags */ uint32_t ic_caps; /* capabilities */ uint32_t ic_htcaps; /* HT capabilities */ uint32_t ic_htextcaps; /* HT extended capabilities */ uint32_t ic_cryptocaps; /* crypto capabilities */ uint8_t ic_modecaps[2]; /* set of mode capabilities */ uint8_t ic_promisc; /* vap's needing promisc mode */ uint8_t ic_allmulti; /* vap's needing all multicast*/ uint8_t ic_nrunning; /* vap's marked running */ uint8_t ic_curmode; /* current mode */ uint8_t ic_macaddr[IEEE80211_ADDR_LEN]; uint16_t ic_bintval; /* beacon interval */ uint16_t ic_lintval; /* listen interval */ uint16_t ic_holdover; /* PM hold over duration */ uint16_t ic_txpowlimit; /* global tx power limit */ struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX]; /* * Channel state: * * ic_channels is the set of available channels for the device; * it is setup by the driver * ic_nchans is the number of valid entries in ic_channels * ic_chan_avail is a bit vector of these channels used to check * whether a channel is available w/o searching the channel table. * ic_chan_active is a (potentially) constrained subset of * ic_chan_avail that reflects any mode setting or user-specified * limit on the set of channels to use/scan * ic_curchan is the current channel the device is set to; it may * be different from ic_bsschan when we are off-channel scanning * or otherwise doing background work * ic_bsschan is the channel selected for operation; it may * be undefined (IEEE80211_CHAN_ANYC) * ic_prevchan is a cached ``previous channel'' used to optimize * lookups when switching back+forth between two channels * (e.g. for dynamic turbo) */ int ic_nchans; /* # entries in ic_channels */ struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX]; uint8_t ic_chan_avail[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_active[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_scan[IEEE80211_CHAN_BYTES]; struct ieee80211_channel *ic_curchan; /* current channel */ const struct ieee80211_rate_table *ic_rt; /* table for ic_curchan */ struct ieee80211_channel *ic_bsschan; /* bss channel */ struct ieee80211_channel *ic_prevchan; /* previous channel */ struct ieee80211_regdomain ic_regdomain;/* regulatory data */ struct ieee80211_appie *ic_countryie; /* calculated country ie */ struct ieee80211_channel *ic_countryie_chan; /* 802.11h/DFS state */ struct ieee80211_channel *ic_csa_newchan;/* channel for doing CSA */ short ic_csa_mode; /* mode for doing CSA */ short ic_csa_count; /* count for doing CSA */ struct ieee80211_dfs_state ic_dfs; /* DFS state */ struct ieee80211_scan_state *ic_scan; /* scan state */ struct ieee80211_scan_methods *ic_scan_methods; /* scan methods */ int ic_lastdata; /* time of last data frame */ int ic_lastscan; /* time last scan completed */ /* NB: this is the union of all vap stations/neighbors */ int ic_max_keyix; /* max h/w key index */ struct ieee80211_node_table ic_sta; /* stations/neighbors */ struct ieee80211_ageq ic_stageq; /* frame staging queue */ uint32_t ic_hash_key; /* random key for mac hash */ /* XXX multi-bss: split out common/vap parts */ struct ieee80211_wme_state ic_wme; /* WME/WMM state */ /* XXX multi-bss: can per-vap be done/make sense? */ enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */ uint16_t ic_nonerpsta; /* # non-ERP stations */ uint16_t ic_longslotsta; /* # long slot time stations */ uint16_t ic_sta_assoc; /* stations associated */ uint16_t ic_ht_sta_assoc;/* HT stations associated */ uint16_t ic_ht40_sta_assoc;/* HT40 stations associated */ uint8_t ic_curhtprotmode;/* HTINFO bss state */ enum ieee80211_protmode ic_htprotmode; /* HT protection mode */ int ic_lastnonerp; /* last time non-ERP sta noted*/ int ic_lastnonht; /* last time non-HT sta noted */ uint8_t ic_rxstream; /* # RX streams */ uint8_t ic_txstream; /* # TX streams */ /* optional state for Atheros SuperG protocol extensions */ struct ieee80211_superg *ic_superg; /* radiotap handling */ struct ieee80211_radiotap_header *ic_th;/* tx radiotap headers */ void *ic_txchan; /* channel state in ic_th */ struct ieee80211_radiotap_header *ic_rh;/* rx radiotap headers */ void *ic_rxchan; /* channel state in ic_rh */ int ic_montaps; /* active monitor mode taps */ /* virtual ap create/delete */ struct ieee80211vap* (*ic_vap_create)(struct ieee80211com *, const char [IFNAMSIZ], int, enum ieee80211_opmode, int, const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN]); void (*ic_vap_delete)(struct ieee80211vap *); /* device specific ioctls */ int (*ic_ioctl)(struct ieee80211com *, u_long, void *); /* start/stop device */ void (*ic_parent)(struct ieee80211com *); /* operating mode attachment */ ieee80211vap_attach ic_vattach[IEEE80211_OPMODE_MAX]; /* return hardware/radio capabilities */ void (*ic_getradiocaps)(struct ieee80211com *, int, int *, struct ieee80211_channel []); /* check and/or prepare regdomain state change */ int (*ic_setregdomain)(struct ieee80211com *, struct ieee80211_regdomain *, int, struct ieee80211_channel []); int (*ic_set_quiet)(struct ieee80211_node *, u_int8_t *quiet_elm); /* regular transmit */ int (*ic_transmit)(struct ieee80211com *, struct mbuf *); /* send/recv 802.11 management frame */ int (*ic_send_mgmt)(struct ieee80211_node *, int, int); /* send raw 802.11 frame */ int (*ic_raw_xmit)(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); /* update device state for 802.11 slot time change */ void (*ic_updateslot)(struct ieee80211com *); /* handle multicast state changes */ void (*ic_update_mcast)(struct ieee80211com *); /* handle promiscuous mode changes */ void (*ic_update_promisc)(struct ieee80211com *); /* new station association callback/notification */ void (*ic_newassoc)(struct ieee80211_node *, int); /* TDMA update notification */ void (*ic_tdma_update)(struct ieee80211_node *, const struct ieee80211_tdma_param *, int); /* node state management */ struct ieee80211_node* (*ic_node_alloc)(struct ieee80211vap *, const uint8_t [IEEE80211_ADDR_LEN]); void (*ic_node_free)(struct ieee80211_node *); void (*ic_node_cleanup)(struct ieee80211_node *); void (*ic_node_age)(struct ieee80211_node *); void (*ic_node_drain)(struct ieee80211_node *); int8_t (*ic_node_getrssi)(const struct ieee80211_node*); void (*ic_node_getsignal)(const struct ieee80211_node*, int8_t *, int8_t *); void (*ic_node_getmimoinfo)( const struct ieee80211_node*, struct ieee80211_mimo_info *); /* scanning support */ void (*ic_scan_start)(struct ieee80211com *); void (*ic_scan_end)(struct ieee80211com *); void (*ic_set_channel)(struct ieee80211com *); void (*ic_scan_curchan)(struct ieee80211_scan_state *, unsigned long); void (*ic_scan_mindwell)(struct ieee80211_scan_state *); /* * 802.11n ADDBA support. A simple/generic implementation * of A-MPDU tx aggregation is provided; the driver may * override these methods to provide their own support. * A-MPDU rx re-ordering happens automatically if the * driver passes out-of-order frames to ieee80211_input * from an assocated HT station. */ int (*ic_recv_action)(struct ieee80211_node *, const struct ieee80211_frame *, const uint8_t *frm, const uint8_t *efrm); int (*ic_send_action)(struct ieee80211_node *, int category, int action, void *); /* check if A-MPDU should be enabled this station+ac */ int (*ic_ampdu_enable)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); /* start/stop doing A-MPDU tx aggregation for a station */ int (*ic_addba_request)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int dialogtoken, int baparamset, int batimeout); int (*ic_addba_response)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int status, int baparamset, int batimeout); void (*ic_addba_stop)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); void (*ic_addba_response_timeout)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); /* BAR response received */ void (*ic_bar_response)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int status); /* start/stop doing A-MPDU rx processing for a station */ int (*ic_ampdu_rx_start)(struct ieee80211_node *, struct ieee80211_rx_ampdu *, int baparamset, int batimeout, int baseqctl); void (*ic_ampdu_rx_stop)(struct ieee80211_node *, struct ieee80211_rx_ampdu *); /* The channel width has changed (20<->2040) */ void (*ic_update_chw)(struct ieee80211com *); uint64_t ic_spare[7]; }; struct ieee80211_aclator; struct ieee80211_tdma_state; struct ieee80211_mesh_state; struct ieee80211_hwmp_state; struct ieee80211vap { struct ifmedia iv_media; /* interface media config */ struct ifnet *iv_ifp; /* associated device */ struct bpf_if *iv_rawbpf; /* packet filter structure */ struct sysctl_ctx_list *iv_sysctl; /* dynamic sysctl context */ struct sysctl_oid *iv_oid; /* net.wlan.X sysctl oid */ TAILQ_ENTRY(ieee80211vap) iv_next; /* list of vap instances */ struct ieee80211com *iv_ic; /* back ptr to common state */ const uint8_t *iv_myaddr; /* MAC address: ifp or ic */ uint32_t iv_debug; /* debug msg flags */ struct ieee80211_stats iv_stats; /* statistics */ uint32_t iv_flags; /* state flags */ uint32_t iv_flags_ext; /* extended state flags */ uint32_t iv_flags_ht; /* HT state flags */ uint32_t iv_flags_ven; /* vendor state flags */ uint32_t iv_ifflags; /* ifnet flags */ uint32_t iv_caps; /* capabilities */ uint32_t iv_htcaps; /* HT capabilities */ uint32_t iv_htextcaps; /* HT extended capabilities */ enum ieee80211_opmode iv_opmode; /* operation mode */ enum ieee80211_state iv_state; /* state machine state */ enum ieee80211_state iv_nstate; /* pending state */ int iv_nstate_arg; /* pending state arg */ struct task iv_nstate_task; /* deferred state processing */ struct task iv_swbmiss_task;/* deferred iv_bmiss call */ struct callout iv_mgtsend; /* mgmt frame response timer */ /* inactivity timer settings */ int iv_inact_init; /* setting for new station */ int iv_inact_auth; /* auth but not assoc setting */ int iv_inact_run; /* authorized setting */ int iv_inact_probe; /* inactive probe time */ int iv_des_nssid; /* # desired ssids */ struct ieee80211_scan_ssid iv_des_ssid[1];/* desired ssid table */ uint8_t iv_des_bssid[IEEE80211_ADDR_LEN]; struct ieee80211_channel *iv_des_chan; /* desired channel */ uint16_t iv_des_mode; /* desired mode */ int iv_nicknamelen; /* XXX junk */ uint8_t iv_nickname[IEEE80211_NWID_LEN]; u_int iv_bgscanidle; /* bg scan idle threshold */ u_int iv_bgscanintvl; /* bg scan min interval */ u_int iv_scanvalid; /* scan cache valid threshold */ u_int iv_scanreq_duration; u_int iv_scanreq_mindwell; u_int iv_scanreq_maxdwell; uint16_t iv_scanreq_flags;/* held scan request params */ uint8_t iv_scanreq_nssid; struct ieee80211_scan_ssid iv_scanreq_ssid[IEEE80211_SCAN_MAX_SSID]; /* sta-mode roaming state */ enum ieee80211_roamingmode iv_roaming; /* roaming mode */ struct ieee80211_roamparam iv_roamparms[IEEE80211_MODE_MAX]; uint8_t iv_bmissthreshold; uint8_t iv_bmiss_count; /* current beacon miss count */ int iv_bmiss_max; /* max bmiss before scan */ uint16_t iv_swbmiss_count;/* beacons in last period */ uint16_t iv_swbmiss_period;/* s/w bmiss period */ struct callout iv_swbmiss; /* s/w beacon miss timer */ int iv_ampdu_rxmax; /* A-MPDU rx limit (bytes) */ int iv_ampdu_density;/* A-MPDU density */ int iv_ampdu_limit; /* A-MPDU tx limit (bytes) */ int iv_amsdu_limit; /* A-MSDU tx limit (bytes) */ u_int iv_ampdu_mintraffic[WME_NUM_AC]; struct ieee80211_beacon_offsets iv_bcn_off; uint32_t *iv_aid_bitmap; /* association id map */ uint16_t iv_max_aid; uint16_t iv_sta_assoc; /* stations associated */ uint16_t iv_ps_sta; /* stations in power save */ uint16_t iv_ps_pending; /* ps sta's w/ pending frames */ uint16_t iv_txseq; /* mcast xmit seq# space */ uint16_t iv_tim_len; /* ic_tim_bitmap size (bytes) */ uint8_t *iv_tim_bitmap; /* power-save stations w/ data*/ uint8_t iv_dtim_period; /* DTIM period */ uint8_t iv_dtim_count; /* DTIM count from last bcn */ /* set/unset aid pwrsav state */ uint8_t iv_quiet; /* Quiet Element */ uint8_t iv_quiet_count; /* constant count for Quiet Element */ uint8_t iv_quiet_count_value; /* variable count for Quiet Element */ uint8_t iv_quiet_period; /* period for Quiet Element */ uint16_t iv_quiet_duration; /* duration for Quiet Element */ uint16_t iv_quiet_offset; /* offset for Quiet Element */ int iv_csa_count; /* count for doing CSA */ struct ieee80211_node *iv_bss; /* information for this node */ struct ieee80211_txparam iv_txparms[IEEE80211_MODE_MAX]; uint16_t iv_rtsthreshold; uint16_t iv_fragthreshold; int iv_inact_timer; /* inactivity timer wait */ /* application-specified IE's to attach to mgt frames */ struct ieee80211_appie *iv_appie_beacon; struct ieee80211_appie *iv_appie_probereq; struct ieee80211_appie *iv_appie_proberesp; struct ieee80211_appie *iv_appie_assocreq; struct ieee80211_appie *iv_appie_assocresp; struct ieee80211_appie *iv_appie_wpa; uint8_t *iv_wpa_ie; uint8_t *iv_rsn_ie; uint16_t iv_max_keyix; /* max h/w key index */ ieee80211_keyix iv_def_txkey; /* default/group tx key index */ struct ieee80211_key iv_nw_keys[IEEE80211_WEP_NKID]; int (*iv_key_alloc)(struct ieee80211vap *, struct ieee80211_key *, ieee80211_keyix *, ieee80211_keyix *); int (*iv_key_delete)(struct ieee80211vap *, const struct ieee80211_key *); int (*iv_key_set)(struct ieee80211vap *, const struct ieee80211_key *); void (*iv_key_update_begin)(struct ieee80211vap *); void (*iv_key_update_end)(struct ieee80211vap *); const struct ieee80211_authenticator *iv_auth; /* authenticator glue */ void *iv_ec; /* private auth state */ const struct ieee80211_aclator *iv_acl; /* acl glue */ void *iv_as; /* private aclator state */ const struct ieee80211_ratectl *iv_rate; void *iv_rs; /* private ratectl state */ struct ieee80211_tdma_state *iv_tdma; /* tdma state */ struct ieee80211_mesh_state *iv_mesh; /* MBSS state */ struct ieee80211_hwmp_state *iv_hwmp; /* HWMP state */ /* operate-mode detach hook */ void (*iv_opdetach)(struct ieee80211vap *); /* receive processing */ int (*iv_input)(struct ieee80211_node *, struct mbuf *, const struct ieee80211_rx_stats *, int, int); void (*iv_recv_mgmt)(struct ieee80211_node *, struct mbuf *, int, const struct ieee80211_rx_stats *, int, int); void (*iv_recv_ctl)(struct ieee80211_node *, struct mbuf *, int); void (*iv_deliver_data)(struct ieee80211vap *, struct ieee80211_node *, struct mbuf *); #if 0 /* send processing */ int (*iv_send_mgmt)(struct ieee80211_node *, int, int); #endif /* beacon miss processing */ void (*iv_bmiss)(struct ieee80211vap *); /* reset device state after 802.11 parameter/state change */ int (*iv_reset)(struct ieee80211vap *, u_long); /* [schedule] beacon frame update */ void (*iv_update_beacon)(struct ieee80211vap *, int); /* power save handling */ void (*iv_update_ps)(struct ieee80211vap *, int); int (*iv_set_tim)(struct ieee80211_node *, int); void (*iv_node_ps)(struct ieee80211_node *, int); void (*iv_sta_ps)(struct ieee80211vap *, int); void (*iv_recv_pspoll)(struct ieee80211_node *, struct mbuf *); /* state machine processing */ int (*iv_newstate)(struct ieee80211vap *, enum ieee80211_state, int); /* 802.3 output method for raw frame xmit */ int (*iv_output)(struct ifnet *, struct mbuf *, const struct sockaddr *, struct route *); uint64_t iv_spare[6]; }; MALLOC_DECLARE(M_80211_VAP); #define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0) #define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN) /* ic_flags/iv_flags */ #define IEEE80211_F_TURBOP 0x00000001 /* CONF: ATH Turbo enabled*/ #define IEEE80211_F_COMP 0x00000002 /* CONF: ATH comp enabled */ #define IEEE80211_F_FF 0x00000004 /* CONF: ATH FF enabled */ #define IEEE80211_F_BURST 0x00000008 /* CONF: bursting enabled */ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */ #define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */ #define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */ #define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */ #define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */ #define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */ #define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/ #define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */ #define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */ #define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */ #define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/ #define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */ #define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */ #define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */ #define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */ #define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */ #define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */ #define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/ #define IEEE80211_F_CSAPENDING 0x00400000 /* STATUS: chan switch pending*/ #define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */ #define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */ #define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */ #define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */ #define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */ #define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */ #define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */ #define IEEE80211_F_PCF 0x20000000 /* CONF: PCF enabled */ #define IEEE80211_F_DOTH 0x40000000 /* CONF: 11h enabled */ #define IEEE80211_F_DWDS 0x80000000 /* CONF: Dynamic WDS enabled */ #define IEEE80211_F_BITS \ "\20\1TURBOP\2COMP\3FF\4BURST\5PRIVACY\6PUREG\10SCAN\11ASCAN\12SIBSS" \ "\13SHSLOT\14PMGTON\15DESBSSID\16WME\17BGSCAN\20SWRETRY\21TXPOW_FIXED" \ "\22IBSSON\23SHPREAMBLE\24DATAPAD\25USEPROT\26USERBARKER\27CSAPENDING" \ "\30WPA1\31WPA2\32DROPUNENC\33COUNTERM\34HIDESSID\35NOBRIDG\36PCF" \ "\37DOTH\40DWDS" /* Atheros protocol-specific flags */ #define IEEE80211_F_ATHEROS \ (IEEE80211_F_FF | IEEE80211_F_COMP | IEEE80211_F_TURBOP) /* Check if an Atheros capability was negotiated for use */ #define IEEE80211_ATH_CAP(vap, ni, bit) \ ((vap)->iv_flags & (ni)->ni_ath_flags & (bit)) /* ic_flags_ext/iv_flags_ext */ #define IEEE80211_FEXT_INACT 0x00000002 /* CONF: sta inact handling */ #define IEEE80211_FEXT_SCANWAIT 0x00000004 /* STATUS: awaiting scan */ /* 0x00000006 reserved */ #define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: complete bgscan */ #define IEEE80211_FEXT_WPS 0x00000010 /* CONF: WPS enabled */ #define IEEE80211_FEXT_TSN 0x00000020 /* CONF: TSN enabled */ #define IEEE80211_FEXT_SCANREQ 0x00000040 /* STATUS: scan req params */ #define IEEE80211_FEXT_RESUME 0x00000080 /* STATUS: start on resume */ #define IEEE80211_FEXT_4ADDR 0x00000100 /* CONF: apply 4-addr encap */ #define IEEE80211_FEXT_NONERP_PR 0x00000200 /* STATUS: non-ERP sta present*/ #define IEEE80211_FEXT_SWBMISS 0x00000400 /* CONF: do bmiss in s/w */ #define IEEE80211_FEXT_DFS 0x00000800 /* CONF: DFS enabled */ #define IEEE80211_FEXT_DOTD 0x00001000 /* CONF: 11d enabled */ #define IEEE80211_FEXT_STATEWAIT 0x00002000 /* STATUS: awaiting state chg */ #define IEEE80211_FEXT_REINIT 0x00004000 /* STATUS: INIT state first */ #define IEEE80211_FEXT_BPF 0x00008000 /* STATUS: BPF tap present */ /* NB: immutable: should be set only when creating a vap */ #define IEEE80211_FEXT_WDSLEGACY 0x00010000 /* CONF: legacy WDS operation */ #define IEEE80211_FEXT_PROBECHAN 0x00020000 /* CONF: probe passive channel*/ #define IEEE80211_FEXT_UNIQMAC 0x00040000 /* CONF: user or computed mac */ #define IEEE80211_FEXT_BITS \ "\20\2INACT\3SCANWAIT\4BGSCAN\5WPS\6TSN\7SCANREQ\10RESUME" \ "\0114ADDR\12NONEPR_PR\13SWBMISS\14DFS\15DOTD\16STATEWAIT\17REINIT" \ "\20BPF\21WDSLEGACY\22PROBECHAN\23UNIQMAC" /* ic_flags_ht/iv_flags_ht */ #define IEEE80211_FHT_NONHT_PR 0x00000001 /* STATUS: non-HT sta present */ #define IEEE80211_FHT_GF 0x00040000 /* CONF: Greenfield enabled */ #define IEEE80211_FHT_HT 0x00080000 /* CONF: HT supported */ #define IEEE80211_FHT_AMPDU_TX 0x00100000 /* CONF: A-MPDU tx supported */ #define IEEE80211_FHT_AMPDU_RX 0x00200000 /* CONF: A-MPDU rx supported */ #define IEEE80211_FHT_AMSDU_TX 0x00400000 /* CONF: A-MSDU tx supported */ #define IEEE80211_FHT_AMSDU_RX 0x00800000 /* CONF: A-MSDU rx supported */ #define IEEE80211_FHT_USEHT40 0x01000000 /* CONF: 20/40 use enabled */ #define IEEE80211_FHT_PUREN 0x02000000 /* CONF: 11n w/o legacy sta's */ #define IEEE80211_FHT_SHORTGI20 0x04000000 /* CONF: short GI in HT20 */ #define IEEE80211_FHT_SHORTGI40 0x08000000 /* CONF: short GI in HT40 */ #define IEEE80211_FHT_HTCOMPAT 0x10000000 /* CONF: HT vendor OUI's */ #define IEEE80211_FHT_RIFS 0x20000000 /* CONF: RIFS enabled */ #define IEEE80211_FHT_STBC_TX 0x40000000 /* CONF: STBC tx enabled */ #define IEEE80211_FHT_STBC_RX 0x80000000 /* CONF: STBC rx enabled */ #define IEEE80211_FHT_BITS \ "\20\1NONHT_PR" \ "\23GF\24HT\25AMPDU_TX\26AMPDU_TX" \ "\27AMSDU_TX\30AMSDU_RX\31USEHT40\32PUREN\33SHORTGI20\34SHORTGI40" \ "\35HTCOMPAT\36RIFS\37STBC_TX\40STBC_RX" #define IEEE80211_FVEN_BITS "\20" /* ic_caps/iv_caps: device driver capabilities */ /* 0x2e available */ #define IEEE80211_C_STA 0x00000001 /* CAPABILITY: STA available */ #define IEEE80211_C_8023ENCAP 0x00000002 /* CAPABILITY: 802.3 encap */ #define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */ #define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/ #define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */ #define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */ #define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */ #define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */ #define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */ #define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */ #define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */ #define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */ #define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */ #define IEEE80211_C_DFS 0x00020000 /* CAPABILITY: DFS/radar avail*/ #define IEEE80211_C_MBSS 0x00040000 /* CAPABILITY: MBSS available */ #define IEEE80211_C_SWSLEEP 0x00080000 /* CAPABILITY: do sleep here */ /* 0x7c0000 available */ #define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */ #define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */ #define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/ #define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */ #define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */ #define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */ /* 0x10000000 reserved */ #define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */ #define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */ #define IEEE80211_C_TDMA 0x80000000 /* CAPABILITY: TDMA avail */ /* XXX protection/barker? */ #define IEEE80211_C_OPMODE \ (IEEE80211_C_STA | IEEE80211_C_IBSS | IEEE80211_C_HOSTAP | \ IEEE80211_C_AHDEMO | IEEE80211_C_MONITOR | IEEE80211_C_WDS | \ IEEE80211_C_TDMA | IEEE80211_C_MBSS) #define IEEE80211_C_BITS \ "\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \ "\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \ "\21MONITOR\22DFS\23MBSS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \ "\37TXFRAG\40TDMA" /* * ic_htcaps/iv_htcaps: HT-specific device/driver capabilities * * NB: the low 16-bits are the 802.11 definitions, the upper * 16-bits are used to define s/w/driver capabilities. */ #define IEEE80211_HTC_AMPDU 0x00010000 /* CAPABILITY: A-MPDU tx */ #define IEEE80211_HTC_AMSDU 0x00020000 /* CAPABILITY: A-MSDU tx */ /* NB: HT40 is implied by IEEE80211_HTCAP_CHWIDTH40 */ #define IEEE80211_HTC_HT 0x00040000 /* CAPABILITY: HT operation */ #define IEEE80211_HTC_SMPS 0x00080000 /* CAPABILITY: MIMO power save*/ #define IEEE80211_HTC_RIFS 0x00100000 /* CAPABILITY: RIFS support */ #define IEEE80211_HTC_RXUNEQUAL 0x00200000 /* CAPABILITY: RX unequal MCS */ #define IEEE80211_HTC_RXMCS32 0x00400000 /* CAPABILITY: MCS32 support */ #define IEEE80211_HTC_TXUNEQUAL 0x00800000 /* CAPABILITY: TX unequal MCS */ #define IEEE80211_HTC_TXMCS32 0x01000000 /* CAPABILITY: MCS32 suport */ #define IEEE80211_C_HTCAP_BITS \ "\20\1LDPC\2CHWIDTH40\5GREENFIELD\6SHORTGI20\7SHORTGI40\10TXSTBC" \ "\21AMPDU\22AMSDU\23HT\24SMPS\25RIFS" int ic_printf(struct ieee80211com *, const char *, ...) __printflike(2, 3); void ieee80211_ifattach(struct ieee80211com *); void ieee80211_ifdetach(struct ieee80211com *); int ieee80211_vap_setup(struct ieee80211com *, struct ieee80211vap *, const char name[IFNAMSIZ], int unit, enum ieee80211_opmode opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN]); int ieee80211_vap_attach(struct ieee80211vap *, ifm_change_cb_t, ifm_stat_cb_t, const uint8_t macaddr[IEEE80211_ADDR_LEN]); void ieee80211_vap_detach(struct ieee80211vap *); const struct ieee80211_rateset *ieee80211_get_suprates(struct ieee80211com *ic, const struct ieee80211_channel *); void ieee80211_announce(struct ieee80211com *); void ieee80211_announce_channels(struct ieee80211com *); void ieee80211_drain(struct ieee80211com *); void ieee80211_chan_init(struct ieee80211com *); struct ieee80211com *ieee80211_find_vap(const uint8_t mac[IEEE80211_ADDR_LEN]); struct ieee80211com *ieee80211_find_com(const char *name); int ieee80211_media_change(struct ifnet *); void ieee80211_media_status(struct ifnet *, struct ifmediareq *); int ieee80211_ioctl(struct ifnet *, u_long, caddr_t); int ieee80211_rate2media(struct ieee80211com *, int, enum ieee80211_phymode); int ieee80211_media2rate(int); int ieee80211_mhz2ieee(u_int, u_int); int ieee80211_chan2ieee(struct ieee80211com *, const struct ieee80211_channel *); u_int ieee80211_ieee2mhz(u_int, u_int); struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *, int freq, int flags); struct ieee80211_channel *ieee80211_find_channel_byieee(struct ieee80211com *, int ieee, int flags); struct ieee80211_channel *ieee80211_lookup_channel_rxstatus(struct ieee80211vap *, const struct ieee80211_rx_stats *); int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode); enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *); uint32_t ieee80211_mac_hash(const struct ieee80211com *, const uint8_t addr[IEEE80211_ADDR_LEN]); char ieee80211_channel_type_char(const struct ieee80211_channel *c); void ieee80211_radiotap_attach(struct ieee80211com *, struct ieee80211_radiotap_header *th, int tlen, uint32_t tx_radiotap, struct ieee80211_radiotap_header *rh, int rlen, uint32_t rx_radiotap); void ieee80211_radiotap_attachv(struct ieee80211com *, struct ieee80211_radiotap_header *th, int tlen, int n_tx_v, uint32_t tx_radiotap, struct ieee80211_radiotap_header *rh, int rlen, int n_rx_v, uint32_t rx_radiotap); void ieee80211_radiotap_detach(struct ieee80211com *); void ieee80211_radiotap_vattach(struct ieee80211vap *); void ieee80211_radiotap_vdetach(struct ieee80211vap *); void ieee80211_radiotap_chan_change(struct ieee80211com *); void ieee80211_radiotap_tx(struct ieee80211vap *, struct mbuf *); void ieee80211_radiotap_rx(struct ieee80211vap *, struct mbuf *); void ieee80211_radiotap_rx_all(struct ieee80211com *, struct mbuf *); static __inline int ieee80211_radiotap_active(const struct ieee80211com *ic) { return (ic->ic_flags_ext & IEEE80211_FEXT_BPF) != 0; } static __inline int ieee80211_radiotap_active_vap(const struct ieee80211vap *vap) { return (vap->iv_flags_ext & IEEE80211_FEXT_BPF) || vap->iv_ic->ic_montaps != 0; } /* * Enqueue a task on the state thread. */ static __inline void ieee80211_runtask(struct ieee80211com *ic, struct task *task) { taskqueue_enqueue(ic->ic_tq, task); } /* * Wait for a queued task to complete. */ static __inline void ieee80211_draintask(struct ieee80211com *ic, struct task *task) { taskqueue_drain(ic->ic_tq, task); } /* * Key update synchronization methods. XXX should not be visible. */ static __inline void ieee80211_key_update_begin(struct ieee80211vap *vap) { vap->iv_key_update_begin(vap); } static __inline void ieee80211_key_update_end(struct ieee80211vap *vap) { vap->iv_key_update_end(vap); } /* * XXX these need to be here for IEEE80211_F_DATAPAD */ /* * Return the space occupied by the 802.11 header and any * padding required by the driver. This works for a * management or data frame. */ static __inline int ieee80211_hdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_hdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(uint32_t)); return size; } /* * Like ieee80211_hdrspace, but handles any type of frame. */ static __inline int ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_anyhdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(uint32_t)); return size; } /* * Notify a vap that beacon state has been updated. */ static __inline void ieee80211_beacon_notify(struct ieee80211vap *vap, int what) { if (vap->iv_state == IEEE80211_S_RUN) vap->iv_update_beacon(vap, what); } /* * Calculate HT channel promotion flags for a channel. * XXX belongs in ieee80211_ht.h but needs IEEE80211_FHT_* */ static __inline int ieee80211_htchanflags(const struct ieee80211_channel *c) { return IEEE80211_IS_CHAN_HT40(c) ? IEEE80211_FHT_HT | IEEE80211_FHT_USEHT40 : IEEE80211_IS_CHAN_HT(c) ? IEEE80211_FHT_HT : 0; } /* * Fetch the current TX power (cap) for the given node. * * This includes the node and ic/vap TX power limit as needed, * but it doesn't take into account any per-rate limit. */ static __inline uint16_t ieee80211_get_node_txpower(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; uint16_t txpower; txpower = ni->ni_txpower; txpower = MIN(txpower, ic->ic_txpowlimit); if (ic->ic_curchan != NULL) { txpower = MIN(txpower, 2 * ic->ic_curchan->ic_maxregpower); txpower = MIN(txpower, ic->ic_curchan->ic_maxpower); } return (txpower); } /* * Debugging facilities compiled in when IEEE80211_DEBUG is defined. * * The intent is that any problem in the net80211 layer can be * diagnosed by inspecting the statistics (dumped by the wlanstats * program) and/or the msgs generated by net80211. Messages are * broken into functional classes and can be controlled with the * wlandebug program. Certain of these msg groups are for facilities * that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1XSM). */ #define IEEE80211_MSG_11N 0x80000000 /* 11n mode debug */ #define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */ #define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */ #define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */ #define IEEE80211_MSG_INPUT 0x08000000 /* input handling */ #define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */ #define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */ #define IEEE80211_MSG_NODE 0x01000000 /* node handling */ #define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */ #define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */ #define IEEE80211_MSG_SCAN 0x00200000 /* scanning */ #define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */ #define IEEE80211_MSG_STATE 0x00080000 /* state machine */ #define IEEE80211_MSG_POWER 0x00040000 /* power save handling */ #define IEEE80211_MSG_HWMP 0x00020000 /* hybrid mesh protocol */ #define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */ #define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */ #define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */ #define IEEE80211_MSG_MESH 0x00002000 /* mesh networking */ #define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */ #define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */ #define IEEE80211_MSG_WME 0x00000400 /* WME protocol */ #define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */ #define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */ #define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */ #define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */ #define IEEE80211_MSG_RATECTL 0x00000020 /* tx rate control */ #define IEEE80211_MSG_ACTION 0x00000010 /* action frame handling */ #define IEEE80211_MSG_WDS 0x00000008 /* WDS handling */ #define IEEE80211_MSG_IOCTL 0x00000004 /* ioctl handling */ #define IEEE80211_MSG_TDMA 0x00000002 /* TDMA handling */ #define IEEE80211_MSG_ANY 0xffffffff /* anything */ #define IEEE80211_MSG_BITS \ "\20\2TDMA\3IOCTL\4WDS\5ACTION\6RATECTL\7ROAM\10INACT\11DOTH\12SUPERG" \ "\13WME\14ACL\15WPA\16RADKEYS\17RADDUMP\20RADIUS\21DOT1XSM\22HWMP" \ "\23POWER\24STATE\25OUTPUT\26SCAN\27AUTH\30ASSOC\31NODE\32ELEMID" \ "\33XRATE\34INPUT\35CRYPTO\36DUPMPKTS\37DEBUG\04011N" #ifdef IEEE80211_DEBUG #define ieee80211_msg(_vap, _m) ((_vap)->iv_debug & (_m)) #define IEEE80211_DPRINTF(_vap, _m, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note(_vap, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_mac(_vap, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_mac(_vap, _mac, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_frame(_vap, _wh, _fmt, __VA_ARGS__); \ } while (0) void ieee80211_note(const struct ieee80211vap *, const char *, ...); void ieee80211_note_mac(const struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], const char *, ...); void ieee80211_note_frame(const struct ieee80211vap *, const struct ieee80211_frame *, const char *, ...); #define ieee80211_msg_debug(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_DEBUG) #define ieee80211_msg_dumppkts(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_DUMPPKTS) #define ieee80211_msg_input(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_INPUT) #define ieee80211_msg_radius(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADIUS) #define ieee80211_msg_dumpradius(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADDUMP) #define ieee80211_msg_dumpradkeys(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADKEYS) #define ieee80211_msg_scan(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_SCAN) #define ieee80211_msg_assoc(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_ASSOC) /* * Emit a debug message about discarding a frame or information * element. One format is for extracting the mac address from * the frame header; the other is for when a header is not * available or otherwise appropriate. */ #define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_frame(_vap, _wh, _type, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_ie(_vap, _wh, _type, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_mac(_vap, _mac, _type, _fmt, __VA_ARGS__);\ } while (0) void ieee80211_discard_frame(const struct ieee80211vap *, const struct ieee80211_frame *, const char *type, const char *fmt, ...); void ieee80211_discard_ie(const struct ieee80211vap *, const struct ieee80211_frame *, const char *type, const char *fmt, ...); void ieee80211_discard_mac(const struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], const char *type, const char *fmt, ...); #else #define IEEE80211_DPRINTF(_vap, _m, _fmt, ...) #define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) #define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) #define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) #define ieee80211_msg_dumppkts(_vap) 0 #define ieee80211_msg(_vap, _m) 0 #define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) #define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) #define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) #endif #endif /* _NET80211_IEEE80211_VAR_H_ */