Index: projects/intel_net_refactor/sys/contrib/dev/igb/Makefile =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/Makefile (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/Makefile (revision 291673) @@ -0,0 +1,30 @@ +#$FreeBSD$ +.PATH: ${.CURDIR} +KMOD = if_igb +SRCS = device_if.h bus_if.h pci_if.h opt_bdg.h +SRCS += if_igb.c $(SHARED_SRCS) +SHARED_SRCS = e1000_api.c e1000_phy.c e1000_nvm.c e1000_mac.c e1000_manage.c +SHARED_SRCS += e1000_osdep.c e1000_82575.c e1000_i210.c e1000_vf.c e1000_mbx.c +CFLAGS += -DSMP -DINET -DINET6 + +# DEVICE_POLLING gives you non-interrupt handling +#CFLAGS += -DDEVICE_POLLING + +# Some workloads seem to perform better using the legacy +# stack interface, while others will benefit from the +# MULTIQUEUE interface. +# IGB_LEGACY_TX gives you the older non-mq stack interface; +# it should be used with a single queue configuration +#CFLAGS += -DIGB_LEGACY_TX + +clean: + rm -f opt_bdg.h device_if.h bus_if.h pci_if.h setdef* + rm -f *.o *.kld *.ko + rm -f @ machine x86 export_syms + rm -f ${CLEANFILES} + +man: + mv /usr/share/man/man4/igb.4.gz /usr/share/man/man4/igbSAVE.4.gz + cp igb.4 /usr/share/man/man4/ + +.include Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/Makefile ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/README =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/README (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/README (revision 291673) @@ -0,0 +1,460 @@ +FreeBSD* Driver for Intel® Ethernet +=================================== +December 8, 2014 + + +Contents +======== + +- Overview +- Identifying Your Adapter +- Building and Installation +- Speed and Duplex Configuration +- Additional Configurations +- Known Limitations +- Support +- License + + +Overview +======== + +This file describes the FreeBSD* driver for Intel® Ethernet. +This driver has been developed for use with all community-suppported versions +of FreeBSD. + +For questions related to hardware requirements, refer to the documentation +supplied with your Gigabit adapter. All hardware requirements listed +apply to use with FreeBSD. + +NOTE: This release includes two gigabit FreeBSD base Drivers for Intel(R) + Ethernet. These drivers are em and igb. + + - The igb driver supports all 82575 and 82576-based gigabit network + connections. + - The em driver supports all other gigabit network connections. + + +Identifying Your Adapter +======================== + +For information on how to identify your adapter, go to the Adapter & +Driver ID Guide at: + + http://support.intel.com/support/go/network/adapter/proidguide.htm + +For the latest Intel network drivers for FreeBSD, see: + + http://downloadcenter.intel.com + +NOTE: Mobile adapters are not fully supported. + + +Building and Installation +========================= + +NOTE: This driver package is to be used only as a standalone archive and the +user should not attempt to incorporate it into the kernel source tree. + +In the instructions below, x.x.x is the driver version as indicated in the +name of the driver tar file. + +1. Move the base driver tar file to the directory of your choice. For + example, use /home/username/igb or /usr/local/src/igb. + +2. Untar/unzip the archive: + + tar xzvf igb-x.x.x.tar.gz + + This will create an igb-x.x.x directory. + +3. To create a loadable module, perform the following steps. + + a. To compile the module + + cd igb-x.x.x + make + + b. To install the compiled module to the system directory: + + make install + + c. If you want the driver to load automatically when the system is booted: + + 1. Edit /boot/loader.conf, and add the following line: + + if_igb_load="YES" + +4. To assign an IP address to the interface, enter the following: + + ifconfig igbX + +5. Verify that the interface works. Enter the following, where + is the IP address for another machine on the same subnet as the interface + that is being tested: + + ping + +6. To configure the IP address to remain after reboot, edit /etc/rc.conf, + and create the appropriate ifconfig_igb entry: + + ifconfig_igb="" + + Example usage: + + ifconfig_igb0="inet 192.168.10.1 netmask 255.255.255.0" + + NOTE: For assistance, see the ifconfig man page. + + +Speed and Duplex Configuration +============================== + +In addressing speed and duplex configuration issues, you need to +distinguish between copper-based adapters and fiber-based adapters. + +In the default mode, an Intel(R) Network Adapter using copper connections +will attempt to auto-negotiate with its link partner to determine the best +setting. If the adapter cannot establish link with the link partner using +auto-negotiation, you may need to manually configure the adapter and link +partner to identical settings to establish link and pass packets. This +should only be needed when attempting to link with an older switch that +does not support auto-negotiation or one that has been forced to a specific +speed or duplex mode. Your link partner must match the setting you choose. + +Speed and Duplex are configured through the ethtool* utility. ethtool is +included with all versions of Red Hat after Red Hat 7.2. For other Linux +distributions, download and install ethtool from the following website: + + http://ftp.kernel.org/pub/software/network/ethtool/ + +Caution: Only experienced network administrators should force speed and +duplex manually. The settings at the switch must always match the adapter +settings. Adapter performance may suffer or your adapter may not +operate if you configure the adapter differently from your switch. + +An Intel® Network Adapter using fiber-based connections, however, will not +attempt to auto-negotiate with its link partner since those adapters operate +only in full duplex and only at their native speed. + +By default, the adapter auto-negotiates the speed and duplex of the +connection. If there is a specific need, the ifconfig utility can be +used to configure the speed and duplex settings on the adapter. + +Example usage: + + ifconfig emX media 100baseTX mediaopt full-duplex + +NOTE: Only use mediaopt to set the driver to full-duplex. If mediaopt is + not specified and you are not running at gigabit speed, the driver + defaults to half-duplex. + +If the interface is currently forced to 100 full duplex, you must use this +command to change to half duplex: + + ifconfig emX media 100baseTX -mediaopt full-duplex + +This driver supports the following media type options: + +Media Type Description +---------- ----------- +autoselect Enables auto-negotiation for speed and duplex. + +10baseT/UTP Sets speed to 10 Mbps. Use the ifconfig mediaopt + option to select full-duplex mode. + +100baseTX Sets speed to 100 Mbps. Use the ifconfig mediaopt + option to select full-duplex mode. + +1000baseTX Sets speed to 1000 Mbps. In this case, the driver + supports only full-duplex mode. + +1000baseSX Sets speed to 1000 Mbps. In this case, the driver + supports only full-duplex mode. + +For more information on the ifconfig utility, see the ifconfig man page. + + +Additional Configurations +========================= + +The driver supports Transmit/Receive Checksum Offload and Jumbo Frames. + +Jumbo Frames +------------ +To enable Jumbo Frames, use the ifconfig utility to set the Maximum +Transport Unit (MTU) frame size above its default of 1500 bytes. + +The Jumbo Frames MTU range for Intel Adapters is 1500 to 9216. To modify +the setting, enter the following: + + ifconfig igbX mtu 9000 + +To confirm the MTU used between two specific devices, use: + + route get + +NOTES: +- Only enable Jumbo Frames if your network infrastructure supports them. +- To enable Jumbo Frames, increase the MTU size on the interface beyond + 1500. +- The Jumbo Frames setting on the switch must be set to at least 22 bytes + larger than that of the MTU. +- The maximum MTU setting for Jumbo Frames is 9216. This value coincides + with the maximum Jumbo Frames size of 9234 bytes. +- Using Jumbo frames at 10 or 100 Mbps is not supported and may result in + poor performance or loss of link. +- The following adapters do not support Jumbo Frames: + Intel®PRO/1000 Gigabit Server Adapter + Intel® PRO/1000 PM Network Connection + Intel® 82562V 10/100 Network Connection + Intel® 82566DM Gigabit Network Connection + Intel® 82566DC Gigabit Network Connection + Intel® 82566MM Gigabit Network Connection + Intel® 82566MC Gigabit Network Connection + Intel® 82562GT 10/100 Network Connection + Intel® 82562G 10/100 Network Connection + Intel® 82566DC-2 Gigabit Network Connection + Intel® 82562V-2 10/100 Network Connection + Intel® 82562G-2 10/100 Network Connection + Intel® 82562GT-2 10/100 Network Connection + Intel® 82567V-3 Gigabit Network Connection + +VLANs +----- +To create a new VLAN interface: + + ifconfig create + +To associate the VLAN interface with a physical interface and +assign a VLAN ID, IP address, and netmask: + + ifconfig netmask vlan + vlandev + +Example: + + ifconfig vlan10 10.0.0.1 netmask 255.255.255.0 vlan 10 vlandev igb0 + +In this example, all packets will be marked on egress with 802.1Q VLAN +tags, specifying a VLAN ID of 10. + +To remove a VLAN interface: + + ifconfig destroy + +Polling +------- +NOTES: +- Device Polling is only valid for non-SMP kernels. +- The driver has to be built into the kernel for Device Polling to be + enabled in the driver. + +To enable polling in the driver, add the following options to the kernel +configuration, and then recompile the kernel: + + options DEVICE_POLLING + options HZ=1000 + +At runtime use: + + ifconfig igbX polling (to turn polling on) + ifconfig igbX -polling (to turn it off) + +Checksum Offload +---------------- +Checksum offloading supports both TCP and UDP packets and is +supported for both transmit and receive. + +Checksum offloading can be enabled or disabled using ifconfig. +Both transmit and receive offloading will be either enabled or +disabled together. You cannot enable/disable one without the other. + +NOTE: Checksum offloading is not supported on 82542-based gigabit adapters. + +To enable checksum offloading: + + ifconfig igbX rxcsum + +To disable checksum offloading: + + ifconfig igbX -rxcsum + +To confirm the current setting: + + ifconfig igbX + +Look for the presence or absence of the following line: + + options=3 + +See the ifconfig man page for further information. + +TSO +--- +The FreeBSD driver offers support for TSO (TCP Segmentation Offload). + +You can enable/disable it in two ways/places: + + - sysctl net.inet.tcp.tso=0 (or 1 to enable it) + + Doing this disables TSO in the stack and will affect all adapters. + + - ifconfig igbX -tso + + Doing this will disable TSO only for this adapter. + +To enable: + + - ifconfig igbX tso + + NOTES: By default only PCI-Express adapters are ENABLED to do TSO. + Others can be enabled by the user at their own risk. + + TSO is not supported on 82547 and 82544-based adapters, + as well as older adapters. + + +MSI-X +----- +The FreeBSD driver offers MSIX support with 82574L-based network connections. +82574L-based network connections will use MSI-X by default. + +MSI or MSI-X can be turned off by an entry in /etc/sysctl.conf + + - hw.em.enable_msi=0 + + Unload and reload the driver. + + +LRO +--- +Large Receive Offload is available in the driver; it is on by default. + +It can be disabled by using: + + ifconfig -lro + +To enable: + + ifconfig lro + +EEE +--- +Valid Range: 0-1 +Default Value: 1 (enabled) + +A link between two EEE-compliant devices will result in periodic bursts of +data followed by long periods where in the link is in an idle state. This Low +Power Idle (LPI) state is supported in both 1Gbps and 100Mbps link speeds. + +NOTE: EEE support requires autonegotiation. + +DMAC +---- +Valid Range: 0, 1, 250, 500, 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, + 9000, and 10000 +Default Value: 1 (enabled) + +Enables or disables DMA Coalescing feature. DMA (Direct Memory Access) allows +the network device to move packet data directly to the system's memory, +reducing CPU utilitzation. However, the frequency and random intervals at +which packets arrive do not allow the system to enter a lower power state. +DMA Coalescing allows the adapter to collect packets before it initiates a +DMA event. This may increase network latency but also increases the chances +that the system will enter a lower power state. + +InterruptThrottleRate (ITR) should be set to dynamic. This will impart the +greatest chance for your system to consume less power. DMA Coalescing is +effective in helping potentially saving the platform power only when it is +enabled across all active ports. + +A whitepaper containing information on how to best configure your platform +is available on the Intel website. + + +Known Limitations +================= + +For known hardware and troubleshooting issues, refer to the following website. + + http://support.intel.com/support/go/network/adapter/home.htm + +Either select the link for your adapter or perform a search for the adapter +number. The adapter's page lists many issues. For a complete list of hardware +issues download your adapter's user guide and read the Release Notes. + + +Detected Tx Unit Hang in Quad Port Adapters +------------------------------------------- +In some cases ports 3 and 4 won’t pass traffic. Ports 1 and 2 don't show +any errors and will pass traffic. + +This issue MAY be resolved by updating to the latest BIOS. You can +check your system's BIOS by downloading the Linux Firmware Developer Kit +that can be obtained at http://www.linuxfirmwarekit.org/ + + +There are known performance issues with this driver when running UDP traffic +with Jumbo Frames. +---------------------------------------------------------------------------- + + +82541/82547 can't link or is slow to link with some link partners +----------------------------------------------------------------- +There is a known compatibility issue where time to link is slow or link is not established between 82541/82547 controllers and some switches. Known switches include: + + - Planex FXG-08TE + - I-O Data ETG-SH8 + +The driver can be compiled with the following changes: + + Edit ./em.x.x.x/src/if_em.h to change the #define EM_MASTER_SLAVE + For example, change from: + + #define EM_MASTER_SLAVE e1000_ms_hw_default + to: + #define EM_MASTER_SLAVE 2 + +Use one of the following options: + + 1 = Master mode + 2 = Slave mode + 3 = Auto master/slave + Setting 2 is recommended. + +Recompile the module: + + cd em-x.x.x + make clean + make + +To install the compiled module in system directory: + + make install + + +Support +======= + +For general information and support, go to the Intel support website at: + + www.intel.com/support/ + +If an issue is identified, support is through email only at: + + freebsd@intel.com + + +License +======= + +This software program is released under the terms of a license agreement +between you ('Licensee') and Intel. Do not use or load this software or any +associated materials (collectively, the 'Software') until you have carefully +read the full terms and conditions of the LICENSE located in this software +package. By loading or using the Software, you agree to the terms of this +Agreement. If you do not agree with the terms of this Agreement, do not +install or use the Software. + +* Other names and brands may be claimed as the property of others. Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/README ___________________________________________________________________ Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_82575.c =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_82575.c (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_82575.c (revision 291673) @@ -0,0 +1,3675 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +/* + * 82575EB Gigabit Network Connection + * 82575EB Gigabit Backplane Connection + * 82575GB Gigabit Network Connection + * 82576 Gigabit Network Connection + * 82576 Quad Port Gigabit Mezzanine Adapter + * 82580 Gigabit Network Connection + * I350 Gigabit Network Connection + */ + +#include "e1000_api.h" +#include "e1000_i210.h" + +static s32 e1000_init_phy_params_82575(struct e1000_hw *hw); +static s32 e1000_init_mac_params_82575(struct e1000_hw *hw); +static s32 e1000_acquire_phy_82575(struct e1000_hw *hw); +static void e1000_release_phy_82575(struct e1000_hw *hw); +static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw); +static void e1000_release_nvm_82575(struct e1000_hw *hw); +static s32 e1000_check_for_link_82575(struct e1000_hw *hw); +static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw); +static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw); +static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw); +static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, + u16 *data); +static s32 e1000_reset_hw_82575(struct e1000_hw *hw); +static s32 e1000_reset_hw_82580(struct e1000_hw *hw); +static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, + u32 offset, u16 *data); +static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, + u32 offset, u16 data); +static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, + bool active); +static s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, + bool active); +static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, + bool active); +static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw); +static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw); +static s32 e1000_get_media_type_82575(struct e1000_hw *hw); +static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw); +static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data); +static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, + u32 offset, u16 data); +static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw); +static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask); +static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, + u16 *speed, u16 *duplex); +static s32 e1000_get_phy_id_82575(struct e1000_hw *hw); +static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask); +static bool e1000_sgmii_active_82575(struct e1000_hw *hw); +static s32 e1000_reset_init_script_82575(struct e1000_hw *hw); +static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw); +static void e1000_config_collision_dist_82575(struct e1000_hw *hw); +static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw); +static void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw); +static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw); +static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw); +static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw); +static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw); +static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw); +static s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, + u16 offset); +static s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, + u16 offset); +static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw); +static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw); +static void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value); +static void e1000_clear_vfta_i350(struct e1000_hw *hw); + +static void e1000_i2c_start(struct e1000_hw *hw); +static void e1000_i2c_stop(struct e1000_hw *hw); +static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data); +static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data); +static s32 e1000_get_i2c_ack(struct e1000_hw *hw); +static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data); +static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data); +static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); +static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); +static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data); +static bool e1000_get_i2c_data(u32 *i2cctl); + +static const u16 e1000_82580_rxpbs_table[] = { + 36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 }; +#define E1000_82580_RXPBS_TABLE_SIZE \ + (sizeof(e1000_82580_rxpbs_table) / \ + sizeof(e1000_82580_rxpbs_table[0])) + + +/** + * e1000_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO + * @hw: pointer to the HW structure + * + * Called to determine if the I2C pins are being used for I2C or as an + * external MDIO interface since the two options are mutually exclusive. + **/ +static bool e1000_sgmii_uses_mdio_82575(struct e1000_hw *hw) +{ + u32 reg = 0; + bool ext_mdio = FALSE; + + DEBUGFUNC("e1000_sgmii_uses_mdio_82575"); + + switch (hw->mac.type) { + case e1000_82575: + case e1000_82576: + reg = E1000_READ_REG(hw, E1000_MDIC); + ext_mdio = !!(reg & E1000_MDIC_DEST); + break; + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + reg = E1000_READ_REG(hw, E1000_MDICNFG); + ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO); + break; + default: + break; + } + return ext_mdio; +} + +/** + * e1000_init_phy_params_82575 - Init PHY func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 e1000_init_phy_params_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u32 ctrl_ext; + + DEBUGFUNC("e1000_init_phy_params_82575"); + + phy->ops.read_i2c_byte = e1000_read_i2c_byte_generic; + phy->ops.write_i2c_byte = e1000_write_i2c_byte_generic; + + if (hw->phy.media_type != e1000_media_type_copper) { + phy->type = e1000_phy_none; + goto out; + } + + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_82575; + + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; + + phy->ops.acquire = e1000_acquire_phy_82575; + phy->ops.check_reset_block = e1000_check_reset_block_generic; + phy->ops.commit = e1000_phy_sw_reset_generic; + phy->ops.get_cfg_done = e1000_get_cfg_done_82575; + phy->ops.release = e1000_release_phy_82575; + + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + + if (e1000_sgmii_active_82575(hw)) { + phy->ops.reset = e1000_phy_hw_reset_sgmii_82575; + ctrl_ext |= E1000_CTRL_I2C_ENA; + } else { + phy->ops.reset = e1000_phy_hw_reset_generic; + ctrl_ext &= ~E1000_CTRL_I2C_ENA; + } + + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + e1000_reset_mdicnfg_82580(hw); + + if (e1000_sgmii_active_82575(hw) && !e1000_sgmii_uses_mdio_82575(hw)) { + phy->ops.read_reg = e1000_read_phy_reg_sgmii_82575; + phy->ops.write_reg = e1000_write_phy_reg_sgmii_82575; + } else { + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + case e1000_i354: + phy->ops.read_reg = e1000_read_phy_reg_82580; + phy->ops.write_reg = e1000_write_phy_reg_82580; + break; + case e1000_i210: + case e1000_i211: + phy->ops.read_reg = e1000_read_phy_reg_gs40g; + phy->ops.write_reg = e1000_write_phy_reg_gs40g; + break; + default: + phy->ops.read_reg = e1000_read_phy_reg_igp; + phy->ops.write_reg = e1000_write_phy_reg_igp; + } + } + + /* Set phy->phy_addr and phy->id. */ + ret_val = e1000_get_phy_id_82575(hw); + + /* Verify phy id and set remaining function pointers */ + switch (phy->id) { + case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case M88E1111_I_PHY_ID: + phy->type = e1000_phy_m88; + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.get_info = e1000_get_phy_info_m88; + if (phy->id == I347AT4_E_PHY_ID || + phy->id == M88E1112_E_PHY_ID || + phy->id == M88E1340M_E_PHY_ID) + phy->ops.get_cable_length = + e1000_get_cable_length_m88_gen2; + else if (phy->id == M88E1543_E_PHY_ID || + phy->id == M88E1512_E_PHY_ID) + phy->ops.get_cable_length = + e1000_get_cable_length_m88_gen2; + else + phy->ops.get_cable_length = e1000_get_cable_length_m88; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; + /* Check if this PHY is confgured for media swap. */ + if (phy->id == M88E1112_E_PHY_ID) { + u16 data; + + ret_val = phy->ops.write_reg(hw, + E1000_M88E1112_PAGE_ADDR, + 2); + if (ret_val) + goto out; + + ret_val = phy->ops.read_reg(hw, + E1000_M88E1112_MAC_CTRL_1, + &data); + if (ret_val) + goto out; + + data = (data & E1000_M88E1112_MAC_CTRL_1_MODE_MASK) >> + E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT; + if (data == E1000_M88E1112_AUTO_COPPER_SGMII || + data == E1000_M88E1112_AUTO_COPPER_BASEX) + hw->mac.ops.check_for_link = + e1000_check_for_link_media_swap; + } + if (phy->id == M88E1512_E_PHY_ID) { + ret_val = e1000_initialize_M88E1512_phy(hw); + if (ret_val) + goto out; + } + break; + case IGP03E1000_E_PHY_ID: + case IGP04E1000_E_PHY_ID: + phy->type = e1000_phy_igp_3; + phy->ops.check_polarity = e1000_check_polarity_igp; + phy->ops.get_info = e1000_get_phy_info_igp; + phy->ops.get_cable_length = e1000_get_cable_length_igp_2; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82575; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic; + break; + case I82580_I_PHY_ID: + case I350_I_PHY_ID: + phy->type = e1000_phy_82580; + phy->ops.check_polarity = e1000_check_polarity_82577; + phy->ops.force_speed_duplex = + e1000_phy_force_speed_duplex_82577; + phy->ops.get_cable_length = e1000_get_cable_length_82577; + phy->ops.get_info = e1000_get_phy_info_82577; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; + break; + case I210_I_PHY_ID: + phy->type = e1000_phy_i210; + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.get_info = e1000_get_phy_info_m88; + phy->ops.get_cable_length = e1000_get_cable_length_m88_gen2; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; + break; + default: + ret_val = -E1000_ERR_PHY; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_init_nvm_params_82575 - Init NVM func ptrs. + * @hw: pointer to the HW structure + **/ +s32 e1000_init_nvm_params_82575(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + u16 size; + + DEBUGFUNC("e1000_init_nvm_params_82575"); + + size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> + E1000_EECD_SIZE_EX_SHIFT); + /* + * Added to a constant, "size" becomes the left-shift value + * for setting word_size. + */ + size += NVM_WORD_SIZE_BASE_SHIFT; + + /* Just in case size is out of range, cap it to the largest + * EEPROM size supported + */ + if (size > 15) + size = 15; + + nvm->word_size = 1 << size; + if (hw->mac.type < e1000_i210) { + nvm->opcode_bits = 8; + nvm->delay_usec = 1; + + switch (nvm->override) { + case e1000_nvm_override_spi_large: + nvm->page_size = 32; + nvm->address_bits = 16; + break; + case e1000_nvm_override_spi_small: + nvm->page_size = 8; + nvm->address_bits = 8; + break; + default: + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? + 16 : 8; + break; + } + if (nvm->word_size == (1 << 15)) + nvm->page_size = 128; + + nvm->type = e1000_nvm_eeprom_spi; + } else { + nvm->type = e1000_nvm_flash_hw; + } + + /* Function Pointers */ + nvm->ops.acquire = e1000_acquire_nvm_82575; + nvm->ops.release = e1000_release_nvm_82575; + if (nvm->word_size < (1 << 15)) + nvm->ops.read = e1000_read_nvm_eerd; + else + nvm->ops.read = e1000_read_nvm_spi; + + nvm->ops.write = e1000_write_nvm_spi; + nvm->ops.validate = e1000_validate_nvm_checksum_generic; + nvm->ops.update = e1000_update_nvm_checksum_generic; + nvm->ops.valid_led_default = e1000_valid_led_default_82575; + + /* override generic family function pointers for specific descendants */ + switch (hw->mac.type) { + case e1000_82580: + nvm->ops.validate = e1000_validate_nvm_checksum_82580; + nvm->ops.update = e1000_update_nvm_checksum_82580; + break; + case e1000_i350: + case e1000_i354: + nvm->ops.validate = e1000_validate_nvm_checksum_i350; + nvm->ops.update = e1000_update_nvm_checksum_i350; + break; + default: + break; + } + + return E1000_SUCCESS; +} + +/** + * e1000_init_mac_params_82575 - Init MAC func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 e1000_init_mac_params_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + + DEBUGFUNC("e1000_init_mac_params_82575"); + + /* Derives media type */ + e1000_get_media_type_82575(hw); + /* Set mta register count */ + mac->mta_reg_count = 128; + /* Set uta register count */ + mac->uta_reg_count = (hw->mac.type == e1000_82575) ? 0 : 128; + /* Set rar entry count */ + mac->rar_entry_count = E1000_RAR_ENTRIES_82575; + if (mac->type == e1000_82576) + mac->rar_entry_count = E1000_RAR_ENTRIES_82576; + if (mac->type == e1000_82580) + mac->rar_entry_count = E1000_RAR_ENTRIES_82580; + if (mac->type == e1000_i350 || mac->type == e1000_i354) + mac->rar_entry_count = E1000_RAR_ENTRIES_I350; + + /* Enable EEE default settings for EEE supported devices */ + if (mac->type >= e1000_i350) + dev_spec->eee_disable = FALSE; + + /* Allow a single clear of the SW semaphore on I210 and newer */ + if (mac->type >= e1000_i210) + dev_spec->clear_semaphore_once = TRUE; + + /* Set if part includes ASF firmware */ + mac->asf_firmware_present = TRUE; + /* FWSM register */ + mac->has_fwsm = TRUE; + /* ARC supported; valid only if manageability features are enabled. */ + mac->arc_subsystem_valid = + !!(E1000_READ_REG(hw, E1000_FWSM) & E1000_FWSM_MODE_MASK); + + /* Function pointers */ + + /* bus type/speed/width */ + mac->ops.get_bus_info = e1000_get_bus_info_pcie_generic; + /* reset */ + if (mac->type >= e1000_82580) + mac->ops.reset_hw = e1000_reset_hw_82580; + else + mac->ops.reset_hw = e1000_reset_hw_82575; + /* hw initialization */ + if ((mac->type == e1000_i210) || (mac->type == e1000_i211)) + mac->ops.init_hw = e1000_init_hw_i210; + else + mac->ops.init_hw = e1000_init_hw_82575; + /* link setup */ + mac->ops.setup_link = e1000_setup_link_generic; + /* physical interface link setup */ + mac->ops.setup_physical_interface = + (hw->phy.media_type == e1000_media_type_copper) + ? e1000_setup_copper_link_82575 : e1000_setup_serdes_link_82575; + /* physical interface shutdown */ + mac->ops.shutdown_serdes = e1000_shutdown_serdes_link_82575; + /* physical interface power up */ + mac->ops.power_up_serdes = e1000_power_up_serdes_link_82575; + /* check for link */ + mac->ops.check_for_link = e1000_check_for_link_82575; + /* read mac address */ + mac->ops.read_mac_addr = e1000_read_mac_addr_82575; + /* configure collision distance */ + mac->ops.config_collision_dist = e1000_config_collision_dist_82575; + /* multicast address update */ + mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic; + if (hw->mac.type == e1000_i350 || mac->type == e1000_i354) { + /* writing VFTA */ + mac->ops.write_vfta = e1000_write_vfta_i350; + /* clearing VFTA */ + mac->ops.clear_vfta = e1000_clear_vfta_i350; + } else { + /* writing VFTA */ + mac->ops.write_vfta = e1000_write_vfta_generic; + /* clearing VFTA */ + mac->ops.clear_vfta = e1000_clear_vfta_generic; + } + if (hw->mac.type >= e1000_82580) + mac->ops.validate_mdi_setting = + e1000_validate_mdi_setting_crossover_generic; + /* ID LED init */ + mac->ops.id_led_init = e1000_id_led_init_generic; + /* blink LED */ + mac->ops.blink_led = e1000_blink_led_generic; + /* setup LED */ + mac->ops.setup_led = e1000_setup_led_generic; + /* cleanup LED */ + mac->ops.cleanup_led = e1000_cleanup_led_generic; + /* turn on/off LED */ + mac->ops.led_on = e1000_led_on_generic; + mac->ops.led_off = e1000_led_off_generic; + /* clear hardware counters */ + mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82575; + /* link info */ + mac->ops.get_link_up_info = e1000_get_link_up_info_82575; + /* acquire SW_FW sync */ + mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_82575; + mac->ops.release_swfw_sync = e1000_release_swfw_sync_82575; + if (mac->type >= e1000_i210) { + mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_i210; + mac->ops.release_swfw_sync = e1000_release_swfw_sync_i210; + } + + /* set lan id for port to determine which phy lock to use */ + hw->mac.ops.set_lan_id(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_init_function_pointers_82575 - Init func ptrs. + * @hw: pointer to the HW structure + * + * Called to initialize all function pointers and parameters. + **/ +void e1000_init_function_pointers_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_init_function_pointers_82575"); + + hw->mac.ops.init_params = e1000_init_mac_params_82575; + hw->nvm.ops.init_params = e1000_init_nvm_params_82575; + hw->phy.ops.init_params = e1000_init_phy_params_82575; + hw->mbx.ops.init_params = e1000_init_mbx_params_pf; +} + +/** + * e1000_acquire_phy_82575 - Acquire rights to access PHY + * @hw: pointer to the HW structure + * + * Acquire access rights to the correct PHY. + **/ +static s32 e1000_acquire_phy_82575(struct e1000_hw *hw) +{ + u16 mask = E1000_SWFW_PHY0_SM; + + DEBUGFUNC("e1000_acquire_phy_82575"); + + if (hw->bus.func == E1000_FUNC_1) + mask = E1000_SWFW_PHY1_SM; + else if (hw->bus.func == E1000_FUNC_2) + mask = E1000_SWFW_PHY2_SM; + else if (hw->bus.func == E1000_FUNC_3) + mask = E1000_SWFW_PHY3_SM; + + return hw->mac.ops.acquire_swfw_sync(hw, mask); +} + +/** + * e1000_release_phy_82575 - Release rights to access PHY + * @hw: pointer to the HW structure + * + * A wrapper to release access rights to the correct PHY. + **/ +static void e1000_release_phy_82575(struct e1000_hw *hw) +{ + u16 mask = E1000_SWFW_PHY0_SM; + + DEBUGFUNC("e1000_release_phy_82575"); + + if (hw->bus.func == E1000_FUNC_1) + mask = E1000_SWFW_PHY1_SM; + else if (hw->bus.func == E1000_FUNC_2) + mask = E1000_SWFW_PHY2_SM; + else if (hw->bus.func == E1000_FUNC_3) + mask = E1000_SWFW_PHY3_SM; + + hw->mac.ops.release_swfw_sync(hw, mask); +} + +/** + * e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the serial gigabit media independent + * interface and stores the retrieved information in data. + **/ +static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, + u16 *data) +{ + s32 ret_val = -E1000_ERR_PARAM; + + DEBUGFUNC("e1000_read_phy_reg_sgmii_82575"); + + if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { + DEBUGOUT1("PHY Address %u is out of range\n", offset); + goto out; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_read_phy_reg_i2c(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset using the serial gigabit + * media independent interface. + **/ +static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, + u16 data) +{ + s32 ret_val = -E1000_ERR_PARAM; + + DEBUGFUNC("e1000_write_phy_reg_sgmii_82575"); + + if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { + DEBUGOUT1("PHY Address %d is out of range\n", offset); + goto out; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_write_phy_reg_i2c(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_get_phy_id_82575 - Retrieve PHY addr and id + * @hw: pointer to the HW structure + * + * Retrieves the PHY address and ID for both PHY's which do and do not use + * sgmi interface. + **/ +static s32 e1000_get_phy_id_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_id; + u32 ctrl_ext; + u32 mdic; + + DEBUGFUNC("e1000_get_phy_id_82575"); + + /* some i354 devices need an extra read for phy id */ + if (hw->mac.type == e1000_i354) + e1000_get_phy_id(hw); + + /* + * For SGMII PHYs, we try the list of possible addresses until + * we find one that works. For non-SGMII PHYs + * (e.g. integrated copper PHYs), an address of 1 should + * work. The result of this function should mean phy->phy_addr + * and phy->id are set correctly. + */ + if (!e1000_sgmii_active_82575(hw)) { + phy->addr = 1; + ret_val = e1000_get_phy_id(hw); + goto out; + } + + if (e1000_sgmii_uses_mdio_82575(hw)) { + switch (hw->mac.type) { + case e1000_82575: + case e1000_82576: + mdic = E1000_READ_REG(hw, E1000_MDIC); + mdic &= E1000_MDIC_PHY_MASK; + phy->addr = mdic >> E1000_MDIC_PHY_SHIFT; + break; + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + mdic = E1000_READ_REG(hw, E1000_MDICNFG); + mdic &= E1000_MDICNFG_PHY_MASK; + phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT; + break; + default: + ret_val = -E1000_ERR_PHY; + goto out; + break; + } + ret_val = e1000_get_phy_id(hw); + goto out; + } + + /* Power on sgmii phy if it is disabled */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + E1000_WRITE_REG(hw, E1000_CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA); + E1000_WRITE_FLUSH(hw); + msec_delay(300); + + /* + * The address field in the I2CCMD register is 3 bits and 0 is invalid. + * Therefore, we need to test 1-7 + */ + for (phy->addr = 1; phy->addr < 8; phy->addr++) { + ret_val = e1000_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id); + if (ret_val == E1000_SUCCESS) { + DEBUGOUT2("Vendor ID 0x%08X read at address %u\n", + phy_id, phy->addr); + /* + * At the time of this writing, The M88 part is + * the only supported SGMII PHY product. + */ + if (phy_id == M88_VENDOR) + break; + } else { + DEBUGOUT1("PHY address %u was unreadable\n", + phy->addr); + } + } + + /* A valid PHY type couldn't be found. */ + if (phy->addr == 8) { + phy->addr = 0; + ret_val = -E1000_ERR_PHY; + } else { + ret_val = e1000_get_phy_id(hw); + } + + /* restore previous sfp cage power state */ + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + +out: + return ret_val; +} + +/** + * e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset + * @hw: pointer to the HW structure + * + * Resets the PHY using the serial gigabit media independent interface. + **/ +static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + struct e1000_phy_info *phy = &hw->phy; + + DEBUGFUNC("e1000_phy_hw_reset_sgmii_82575"); + + /* + * This isn't a TRUE "hard" reset, but is the only reset + * available to us at this time. + */ + + DEBUGOUT("Soft resetting SGMII attached PHY...\n"); + + if (!(hw->phy.ops.write_reg)) + goto out; + + /* + * SFP documentation requires the following to configure the SPF module + * to work on SGMII. No further documentation is given. + */ + ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084); + if (ret_val) + goto out; + + ret_val = hw->phy.ops.commit(hw); + if (ret_val) + goto out; + + if (phy->id == M88E1512_E_PHY_ID) + ret_val = e1000_initialize_M88E1512_phy(hw); +out: + return ret_val; +} + +/** + * e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state + * @hw: pointer to the HW structure + * @active: TRUE to enable LPLU, FALSE to disable + * + * Sets the LPLU D0 state according to the active flag. When + * activating LPLU this function also disables smart speed + * and vice versa. LPLU will not be activated unless the + * device autonegotiation advertisement meets standards of + * either 10 or 10/100 or 10/100/1000 at all duplexes. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 data; + + DEBUGFUNC("e1000_set_d0_lplu_state_82575"); + + if (!(hw->phy.ops.read_reg)) + goto out; + + ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); + if (ret_val) + goto out; + + if (active) { + data |= IGP02E1000_PM_D0_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + goto out; + + /* When LPLU is enabled, we should disable SmartSpeed */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } else { + data &= ~IGP02E1000_PM_D0_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } else if (phy->smart_speed == e1000_smart_speed_off) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } + } + +out: + return ret_val; +} + +/** + * e1000_set_d0_lplu_state_82580 - Set Low Power Linkup D0 state + * @hw: pointer to the HW structure + * @active: TRUE to enable LPLU, FALSE to disable + * + * Sets the LPLU D0 state according to the active flag. When + * activating LPLU this function also disables smart speed + * and vice versa. LPLU will not be activated unless the + * device autonegotiation advertisement meets standards of + * either 10 or 10/100 or 10/100/1000 at all duplexes. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 data; + + DEBUGFUNC("e1000_set_d0_lplu_state_82580"); + + data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); + + if (active) { + data |= E1000_82580_PM_D0_LPLU; + + /* When LPLU is enabled, we should disable SmartSpeed */ + data &= ~E1000_82580_PM_SPD; + } else { + data &= ~E1000_82580_PM_D0_LPLU; + + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) + data |= E1000_82580_PM_SPD; + else if (phy->smart_speed == e1000_smart_speed_off) + data &= ~E1000_82580_PM_SPD; + } + + E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); + return E1000_SUCCESS; +} + +/** + * e1000_set_d3_lplu_state_82580 - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D3 + * and SmartSpeed is disabled when active is TRUE, else clear lplu for D3 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. + **/ +s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 data; + + DEBUGFUNC("e1000_set_d3_lplu_state_82580"); + + data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); + + if (!active) { + data &= ~E1000_82580_PM_D3_LPLU; + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) + data |= E1000_82580_PM_SPD; + else if (phy->smart_speed == e1000_smart_speed_off) + data &= ~E1000_82580_PM_SPD; + } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || + (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || + (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { + data |= E1000_82580_PM_D3_LPLU; + /* When LPLU is enabled, we should disable SmartSpeed */ + data &= ~E1000_82580_PM_SPD; + } + + E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); + return E1000_SUCCESS; +} + +/** + * e1000_acquire_nvm_82575 - Request for access to EEPROM + * @hw: pointer to the HW structure + * + * Acquire the necessary semaphores for exclusive access to the EEPROM. + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -E1000_ERR_NVM (-1). + **/ +static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_acquire_nvm_82575"); + + ret_val = e1000_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); + if (ret_val) + goto out; + + /* + * Check if there is some access + * error this access may hook on + */ + if (hw->mac.type == e1000_i350) { + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + if (eecd & (E1000_EECD_BLOCKED | E1000_EECD_ABORT | + E1000_EECD_TIMEOUT)) { + /* Clear all access error flags */ + E1000_WRITE_REG(hw, E1000_EECD, eecd | + E1000_EECD_ERROR_CLR); + DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); + } + } + + if (hw->mac.type == e1000_82580) { + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + if (eecd & E1000_EECD_BLOCKED) { + /* Clear access error flag */ + E1000_WRITE_REG(hw, E1000_EECD, eecd | + E1000_EECD_BLOCKED); + DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); + } + } + + ret_val = e1000_acquire_nvm_generic(hw); + if (ret_val) + e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); + +out: + return ret_val; +} + +/** + * e1000_release_nvm_82575 - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit, + * then release the semaphores acquired. + **/ +static void e1000_release_nvm_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_release_nvm_82575"); + + e1000_release_nvm_generic(hw); + + e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); +} + +/** + * e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Acquire the SW/FW semaphore to access the PHY or NVM. The mask + * will also specify which port we're acquiring the lock for. + **/ +static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + u32 fwmask = mask << 16; + s32 ret_val = E1000_SUCCESS; + s32 i = 0, timeout = 200; + + DEBUGFUNC("e1000_acquire_swfw_sync_82575"); + + while (i < timeout) { + if (e1000_get_hw_semaphore_generic(hw)) { + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + if (!(swfw_sync & (fwmask | swmask))) + break; + + /* + * Firmware currently using resource (fwmask) + * or other software thread using resource (swmask) + */ + e1000_put_hw_semaphore_generic(hw); + msec_delay_irq(5); + i++; + } + + if (i == timeout) { + DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n"); + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync |= swmask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); + +out: + return ret_val; +} + +/** + * e1000_release_swfw_sync_82575 - Release SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Release the SW/FW semaphore used to access the PHY or NVM. The mask + * will also specify which port we're releasing the lock for. + **/ +static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + + DEBUGFUNC("e1000_release_swfw_sync_82575"); + + while (e1000_get_hw_semaphore_generic(hw) != E1000_SUCCESS) + ; /* Empty */ + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + swfw_sync &= ~mask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); +} + +/** + * e1000_get_cfg_done_82575 - Read config done bit + * @hw: pointer to the HW structure + * + * Read the management control register for the config done bit for + * completion status. NOTE: silicon which is EEPROM-less will fail trying + * to read the config done bit, so an error is *ONLY* logged and returns + * E1000_SUCCESS. If we were to return with error, EEPROM-less silicon + * would not be able to be reset or change link. + **/ +static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw) +{ + s32 timeout = PHY_CFG_TIMEOUT; + u32 mask = E1000_NVM_CFG_DONE_PORT_0; + + DEBUGFUNC("e1000_get_cfg_done_82575"); + + if (hw->bus.func == E1000_FUNC_1) + mask = E1000_NVM_CFG_DONE_PORT_1; + else if (hw->bus.func == E1000_FUNC_2) + mask = E1000_NVM_CFG_DONE_PORT_2; + else if (hw->bus.func == E1000_FUNC_3) + mask = E1000_NVM_CFG_DONE_PORT_3; + while (timeout) { + if (E1000_READ_REG(hw, E1000_EEMNGCTL) & mask) + break; + msec_delay(1); + timeout--; + } + if (!timeout) + DEBUGOUT("MNG configuration cycle has not completed.\n"); + + /* If EEPROM is not marked present, init the PHY manually */ + if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES) && + (hw->phy.type == e1000_phy_igp_3)) + e1000_phy_init_script_igp3(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_get_link_up_info_82575 - Get link speed/duplex info + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * This is a wrapper function, if using the serial gigabit media independent + * interface, use PCS to retrieve the link speed and duplex information. + * Otherwise, use the generic function to get the link speed and duplex info. + **/ +static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + s32 ret_val; + + DEBUGFUNC("e1000_get_link_up_info_82575"); + + if (hw->phy.media_type != e1000_media_type_copper) + ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, speed, + duplex); + else + ret_val = e1000_get_speed_and_duplex_copper_generic(hw, speed, + duplex); + + return ret_val; +} + +/** + * e1000_check_for_link_82575 - Check for link + * @hw: pointer to the HW structure + * + * If sgmii is enabled, then use the pcs register to determine link, otherwise + * use the generic interface for determining link. + **/ +static s32 e1000_check_for_link_82575(struct e1000_hw *hw) +{ + s32 ret_val; + u16 speed, duplex; + + DEBUGFUNC("e1000_check_for_link_82575"); + + if (hw->phy.media_type != e1000_media_type_copper) { + ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, &speed, + &duplex); + /* + * Use this flag to determine if link needs to be checked or + * not. If we have link clear the flag so that we do not + * continue to check for link. + */ + hw->mac.get_link_status = !hw->mac.serdes_has_link; + + /* + * Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) + DEBUGOUT("Error configuring flow control\n"); + } else { + ret_val = e1000_check_for_copper_link_generic(hw); + } + + return ret_val; +} + +/** + * e1000_check_for_link_media_swap - Check which M88E1112 interface linked + * @hw: pointer to the HW structure + * + * Poll the M88E1112 interfaces to see which interface achieved link. + */ +static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + u8 port = 0; + + DEBUGFUNC("e1000_check_for_link_media_swap"); + + /* Check for copper. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); + if (ret_val) + return ret_val; + + if (data & E1000_M88E1112_STATUS_LINK) + port = E1000_MEDIA_PORT_COPPER; + + /* Check for other. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); + if (ret_val) + return ret_val; + + if (data & E1000_M88E1112_STATUS_LINK) + port = E1000_MEDIA_PORT_OTHER; + + /* Determine if a swap needs to happen. */ + if (port && (hw->dev_spec._82575.media_port != port)) { + hw->dev_spec._82575.media_port = port; + hw->dev_spec._82575.media_changed = TRUE; + } + + if (port == E1000_MEDIA_PORT_COPPER) { + /* reset page to 0 */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; + e1000_check_for_link_82575(hw); + } else { + e1000_check_for_link_82575(hw); + /* reset page to 0 */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; + } + + return E1000_SUCCESS; +} + +/** + * e1000_power_up_serdes_link_82575 - Power up the serdes link after shutdown + * @hw: pointer to the HW structure + **/ +static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw) +{ + u32 reg; + + DEBUGFUNC("e1000_power_up_serdes_link_82575"); + + if ((hw->phy.media_type != e1000_media_type_internal_serdes) && + !e1000_sgmii_active_82575(hw)) + return; + + /* Enable PCS to turn on link */ + reg = E1000_READ_REG(hw, E1000_PCS_CFG0); + reg |= E1000_PCS_CFG_PCS_EN; + E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); + + /* Power up the laser */ + reg = E1000_READ_REG(hw, E1000_CTRL_EXT); + reg &= ~E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); + + /* flush the write to verify completion */ + E1000_WRITE_FLUSH(hw); + msec_delay(1); +} + +/** + * e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Using the physical coding sub-layer (PCS), retrieve the current speed and + * duplex, then store the values in the pointers provided. + **/ +static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, + u16 *speed, u16 *duplex) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 pcs; + u32 status; + + DEBUGFUNC("e1000_get_pcs_speed_and_duplex_82575"); + + /* + * Read the PCS Status register for link state. For non-copper mode, + * the status register is not accurate. The PCS status register is + * used instead. + */ + pcs = E1000_READ_REG(hw, E1000_PCS_LSTAT); + + /* + * The link up bit determines when link is up on autoneg. + */ + if (pcs & E1000_PCS_LSTS_LINK_OK) { + mac->serdes_has_link = TRUE; + + /* Detect and store PCS speed */ + if (pcs & E1000_PCS_LSTS_SPEED_1000) + *speed = SPEED_1000; + else if (pcs & E1000_PCS_LSTS_SPEED_100) + *speed = SPEED_100; + else + *speed = SPEED_10; + + /* Detect and store PCS duplex */ + if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + /* Check if it is an I354 2.5Gb backplane connection. */ + if (mac->type == e1000_i354) { + status = E1000_READ_REG(hw, E1000_STATUS); + if ((status & E1000_STATUS_2P5_SKU) && + !(status & E1000_STATUS_2P5_SKU_OVER)) { + *speed = SPEED_2500; + *duplex = FULL_DUPLEX; + DEBUGOUT("2500 Mbs, "); + DEBUGOUT("Full Duplex\n"); + } + } + + } else { + mac->serdes_has_link = FALSE; + *speed = 0; + *duplex = 0; + } + + return E1000_SUCCESS; +} + +/** + * e1000_shutdown_serdes_link_82575 - Remove link during power down + * @hw: pointer to the HW structure + * + * In the case of serdes shut down sfp and PCS on driver unload + * when management pass thru is not enabled. + **/ +void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw) +{ + u32 reg; + + DEBUGFUNC("e1000_shutdown_serdes_link_82575"); + + if ((hw->phy.media_type != e1000_media_type_internal_serdes) && + !e1000_sgmii_active_82575(hw)) + return; + + if (!e1000_enable_mng_pass_thru(hw)) { + /* Disable PCS to turn off link */ + reg = E1000_READ_REG(hw, E1000_PCS_CFG0); + reg &= ~E1000_PCS_CFG_PCS_EN; + E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); + + /* shutdown the laser */ + reg = E1000_READ_REG(hw, E1000_CTRL_EXT); + reg |= E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); + + /* flush the write to verify completion */ + E1000_WRITE_FLUSH(hw); + msec_delay(1); + } + + return; +} + +/** + * e1000_reset_hw_82575 - Reset hardware + * @hw: pointer to the HW structure + * + * This resets the hardware into a known state. + **/ +static s32 e1000_reset_hw_82575(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + + DEBUGFUNC("e1000_reset_hw_82575"); + + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + ret_val = e1000_disable_pcie_master_generic(hw); + if (ret_val) + DEBUGOUT("PCI-E Master disable polling has failed.\n"); + + /* set the completion timeout for interface */ + ret_val = e1000_set_pcie_completion_timeout(hw); + if (ret_val) + DEBUGOUT("PCI-E Set completion timeout has failed.\n"); + + DEBUGOUT("Masking off all interrupts\n"); + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + + E1000_WRITE_REG(hw, E1000_RCTL, 0); + E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP); + E1000_WRITE_FLUSH(hw); + + msec_delay(10); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + DEBUGOUT("Issuing a global reset to MAC\n"); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST); + + ret_val = e1000_get_auto_rd_done_generic(hw); + if (ret_val) { + /* + * When auto config read does not complete, do not + * return with an error. This can happen in situations + * where there is no eeprom and prevents getting link. + */ + DEBUGOUT("Auto Read Done did not complete\n"); + } + + /* If EEPROM is not present, run manual init scripts */ + if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES)) + e1000_reset_init_script_82575(hw); + + /* Clear any pending interrupt events. */ + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + E1000_READ_REG(hw, E1000_ICR); + + /* Install any alternate MAC address into RAR0 */ + ret_val = e1000_check_alt_mac_addr_generic(hw); + + return ret_val; +} + +/** + * e1000_init_hw_82575 - Initialize hardware + * @hw: pointer to the HW structure + * + * This inits the hardware readying it for operation. + **/ +s32 e1000_init_hw_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + u16 i, rar_count = mac->rar_entry_count; + + DEBUGFUNC("e1000_init_hw_82575"); + + /* Initialize identification LED */ + ret_val = mac->ops.id_led_init(hw); + if (ret_val) { + DEBUGOUT("Error initializing identification LED\n"); + /* This is not fatal and we should not stop init due to this */ + } + + /* Disabling VLAN filtering */ + DEBUGOUT("Initializing the IEEE VLAN\n"); + mac->ops.clear_vfta(hw); + + /* Setup the receive address */ + e1000_init_rx_addrs_generic(hw, rar_count); + + /* Zero out the Multicast HASH table */ + DEBUGOUT("Zeroing the MTA\n"); + for (i = 0; i < mac->mta_reg_count; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); + + /* Zero out the Unicast HASH table */ + DEBUGOUT("Zeroing the UTA\n"); + for (i = 0; i < mac->uta_reg_count; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_UTA, i, 0); + + /* Setup link and flow control */ + ret_val = mac->ops.setup_link(hw); + + /* Set the default MTU size */ + hw->dev_spec._82575.mtu = 1500; + + /* + * Clear all of the statistics registers (clear on read). It is + * important that we do this after we have tried to establish link + * because the symbol error count will increment wildly if there + * is no link. + */ + e1000_clear_hw_cntrs_82575(hw); + + return ret_val; +} + +/** + * e1000_setup_copper_link_82575 - Configure copper link settings + * @hw: pointer to the HW structure + * + * Configures the link for auto-neg or forced speed and duplex. Then we check + * for link, once link is established calls to configure collision distance + * and flow control are called. + **/ +static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + u32 phpm_reg; + + DEBUGFUNC("e1000_setup_copper_link_82575"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= E1000_CTRL_SLU; + ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Clear Go Link Disconnect bit on supported devices */ + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + case e1000_i210: + case e1000_i211: + phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); + phpm_reg &= ~E1000_82580_PM_GO_LINKD; + E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, phpm_reg); + break; + default: + break; + } + + ret_val = e1000_setup_serdes_link_82575(hw); + if (ret_val) + goto out; + + if (e1000_sgmii_active_82575(hw)) { + /* allow time for SFP cage time to power up phy */ + msec_delay(300); + + ret_val = hw->phy.ops.reset(hw); + if (ret_val) { + DEBUGOUT("Error resetting the PHY.\n"); + goto out; + } + } + switch (hw->phy.type) { + case e1000_phy_i210: + case e1000_phy_m88: + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: + case I210_I_PHY_ID: + ret_val = e1000_copper_link_setup_m88_gen2(hw); + break; + default: + ret_val = e1000_copper_link_setup_m88(hw); + break; + } + break; + case e1000_phy_igp_3: + ret_val = e1000_copper_link_setup_igp(hw); + break; + case e1000_phy_82580: + ret_val = e1000_copper_link_setup_82577(hw); + break; + default: + ret_val = -E1000_ERR_PHY; + break; + } + + if (ret_val) + goto out; + + ret_val = e1000_setup_copper_link_generic(hw); +out: + return ret_val; +} + +/** + * e1000_setup_serdes_link_82575 - Setup link for serdes + * @hw: pointer to the HW structure + * + * Configure the physical coding sub-layer (PCS) link. The PCS link is + * used on copper connections where the serialized gigabit media independent + * interface (sgmii), or serdes fiber is being used. Configures the link + * for auto-negotiation or forces speed/duplex. + **/ +static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw) +{ + u32 ctrl_ext, ctrl_reg, reg, anadv_reg; + bool pcs_autoneg; + s32 ret_val = E1000_SUCCESS; + u16 data; + + DEBUGFUNC("e1000_setup_serdes_link_82575"); + + if ((hw->phy.media_type != e1000_media_type_internal_serdes) && + !e1000_sgmii_active_82575(hw)) + return ret_val; + + /* + * On the 82575, SerDes loopback mode persists until it is + * explicitly turned off or a power cycle is performed. A read to + * the register does not indicate its status. Therefore, we ensure + * loopback mode is disabled during initialization. + */ + E1000_WRITE_REG(hw, E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); + + /* power on the sfp cage if present */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + + ctrl_reg = E1000_READ_REG(hw, E1000_CTRL); + ctrl_reg |= E1000_CTRL_SLU; + + /* set both sw defined pins on 82575/82576*/ + if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) + ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1; + + reg = E1000_READ_REG(hw, E1000_PCS_LCTL); + + /* default pcs_autoneg to the same setting as mac autoneg */ + pcs_autoneg = hw->mac.autoneg; + + switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) { + case E1000_CTRL_EXT_LINK_MODE_SGMII: + /* sgmii mode lets the phy handle forcing speed/duplex */ + pcs_autoneg = TRUE; + /* autoneg time out should be disabled for SGMII mode */ + reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT); + break; + case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: + /* disable PCS autoneg and support parallel detect only */ + pcs_autoneg = FALSE; + /* fall through to default case */ + default: + if (hw->mac.type == e1000_82575 || + hw->mac.type == e1000_82576) { + ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT) + pcs_autoneg = FALSE; + } + + /* + * non-SGMII modes only supports a speed of 1000/Full for the + * link so it is best to just force the MAC and let the pcs + * link either autoneg or be forced to 1000/Full + */ + ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD | + E1000_CTRL_FD | E1000_CTRL_FRCDPX; + + /* set speed of 1000/Full if speed/duplex is forced */ + reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL; + break; + } + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl_reg); + + /* + * New SerDes mode allows for forcing speed or autonegotiating speed + * at 1gb. Autoneg should be default set by most drivers. This is the + * mode that will be compatible with older link partners and switches. + * However, both are supported by the hardware and some drivers/tools. + */ + reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | + E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); + + if (pcs_autoneg) { + /* Set PCS register for autoneg */ + reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ + E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ + + /* Disable force flow control for autoneg */ + reg &= ~E1000_PCS_LCTL_FORCE_FCTRL; + + /* Configure flow control advertisement for autoneg */ + anadv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV); + anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE); + + switch (hw->fc.requested_mode) { + case e1000_fc_full: + case e1000_fc_rx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + anadv_reg |= E1000_TXCW_PAUSE; + break; + case e1000_fc_tx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + break; + default: + break; + } + + E1000_WRITE_REG(hw, E1000_PCS_ANADV, anadv_reg); + + DEBUGOUT1("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); + } else { + /* Set PCS register for forced link */ + reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ + + /* Force flow control for forced link */ + reg |= E1000_PCS_LCTL_FORCE_FCTRL; + + DEBUGOUT1("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); + } + + E1000_WRITE_REG(hw, E1000_PCS_LCTL, reg); + + if (!pcs_autoneg && !e1000_sgmii_active_82575(hw)) + e1000_force_mac_fc_generic(hw); + + return ret_val; +} + +/** + * e1000_get_media_type_82575 - derives current media type. + * @hw: pointer to the HW structure + * + * The media type is chosen reflecting few settings. + * The following are taken into account: + * - link mode set in the current port Init Control Word #3 + * - current link mode settings in CSR register + * - MDIO vs. I2C PHY control interface chosen + * - SFP module media type + **/ +static s32 e1000_get_media_type_82575(struct e1000_hw *hw) +{ + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + s32 ret_val = E1000_SUCCESS; + u32 ctrl_ext = 0; + u32 link_mode = 0; + + /* Set internal phy as default */ + dev_spec->sgmii_active = FALSE; + dev_spec->module_plugged = FALSE; + + /* Get CSR setting */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + + /* extract link mode setting */ + link_mode = ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK; + + switch (link_mode) { + case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: + hw->phy.media_type = e1000_media_type_internal_serdes; + break; + case E1000_CTRL_EXT_LINK_MODE_GMII: + hw->phy.media_type = e1000_media_type_copper; + break; + case E1000_CTRL_EXT_LINK_MODE_SGMII: + /* Get phy control interface type set (MDIO vs. I2C)*/ + if (e1000_sgmii_uses_mdio_82575(hw)) { + hw->phy.media_type = e1000_media_type_copper; + dev_spec->sgmii_active = TRUE; + break; + } + /* fall through for I2C based SGMII */ + case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: + /* read media type from SFP EEPROM */ + ret_val = e1000_set_sfp_media_type_82575(hw); + if ((ret_val != E1000_SUCCESS) || + (hw->phy.media_type == e1000_media_type_unknown)) { + /* + * If media type was not identified then return media + * type defined by the CTRL_EXT settings. + */ + hw->phy.media_type = e1000_media_type_internal_serdes; + + if (link_mode == E1000_CTRL_EXT_LINK_MODE_SGMII) { + hw->phy.media_type = e1000_media_type_copper; + dev_spec->sgmii_active = TRUE; + } + + break; + } + + /* do not change link mode for 100BaseFX */ + if (dev_spec->eth_flags.e100_base_fx) + break; + + /* change current link mode setting */ + ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK; + + if (hw->phy.media_type == e1000_media_type_copper) + ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_SGMII; + else + ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; + + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + + break; + } + + return ret_val; +} + +/** + * e1000_set_sfp_media_type_82575 - derives SFP module media type. + * @hw: pointer to the HW structure + * + * The media type is chosen based on SFP module. + * compatibility flags retrieved from SFP ID EEPROM. + **/ +static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw) +{ + s32 ret_val = E1000_ERR_CONFIG; + u32 ctrl_ext = 0; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + struct sfp_e1000_flags *eth_flags = &dev_spec->eth_flags; + u8 tranceiver_type = 0; + s32 timeout = 3; + + /* Turn I2C interface ON and power on sfp cage */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_I2C_ENA); + + E1000_WRITE_FLUSH(hw); + + /* Read SFP module data */ + while (timeout) { + ret_val = e1000_read_sfp_data_byte(hw, + E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_IDENTIFIER_OFFSET), + &tranceiver_type); + if (ret_val == E1000_SUCCESS) + break; + msec_delay(100); + timeout--; + } + if (ret_val != E1000_SUCCESS) + goto out; + + ret_val = e1000_read_sfp_data_byte(hw, + E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_ETH_FLAGS_OFFSET), + (u8 *)eth_flags); + if (ret_val != E1000_SUCCESS) + goto out; + + /* Check if there is some SFP module plugged and powered */ + if ((tranceiver_type == E1000_SFF_IDENTIFIER_SFP) || + (tranceiver_type == E1000_SFF_IDENTIFIER_SFF)) { + dev_spec->module_plugged = TRUE; + if (eth_flags->e1000_base_lx || eth_flags->e1000_base_sx) { + hw->phy.media_type = e1000_media_type_internal_serdes; + } else if (eth_flags->e100_base_fx) { + dev_spec->sgmii_active = TRUE; + hw->phy.media_type = e1000_media_type_internal_serdes; + } else if (eth_flags->e1000_base_t) { + dev_spec->sgmii_active = TRUE; + hw->phy.media_type = e1000_media_type_copper; + } else { + hw->phy.media_type = e1000_media_type_unknown; + DEBUGOUT("PHY module has not been recognized\n"); + goto out; + } + } else { + hw->phy.media_type = e1000_media_type_unknown; + } + ret_val = E1000_SUCCESS; +out: + /* Restore I2C interface setting */ + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + return ret_val; +} + +/** + * e1000_valid_led_default_82575 - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_valid_led_default_82575"); + + ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { + switch (hw->phy.media_type) { + case e1000_media_type_internal_serdes: + *data = ID_LED_DEFAULT_82575_SERDES; + break; + case e1000_media_type_copper: + default: + *data = ID_LED_DEFAULT; + break; + } + } +out: + return ret_val; +} + +/** + * e1000_sgmii_active_82575 - Return sgmii state + * @hw: pointer to the HW structure + * + * 82575 silicon has a serialized gigabit media independent interface (sgmii) + * which can be enabled for use in the embedded applications. Simply + * return the current state of the sgmii interface. + **/ +static bool e1000_sgmii_active_82575(struct e1000_hw *hw) +{ + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + return dev_spec->sgmii_active; +} + +/** + * e1000_reset_init_script_82575 - Inits HW defaults after reset + * @hw: pointer to the HW structure + * + * Inits recommended HW defaults after a reset when there is no EEPROM + * detected. This is only for the 82575. + **/ +static s32 e1000_reset_init_script_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_reset_init_script_82575"); + + if (hw->mac.type == e1000_82575) { + DEBUGOUT("Running reset init script for 82575\n"); + /* SerDes configuration via SERDESCTRL */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x00, 0x0C); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x01, 0x78); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x1B, 0x23); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x23, 0x15); + + /* CCM configuration via CCMCTL register */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x14, 0x00); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x10, 0x00); + + /* PCIe lanes configuration */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x00, 0xEC); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x61, 0xDF); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x34, 0x05); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x2F, 0x81); + + /* PCIe PLL Configuration */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x02, 0x47); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x14, 0x00); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x10, 0x00); + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_mac_addr_82575 - Read device MAC address + * @hw: pointer to the HW structure + **/ +static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_read_mac_addr_82575"); + + /* + * If there's an alternate MAC address place it in RAR0 + * so that it will override the Si installed default perm + * address. + */ + ret_val = e1000_check_alt_mac_addr_generic(hw); + if (ret_val) + goto out; + + ret_val = e1000_read_mac_addr_generic(hw); + +out: + return ret_val; +} + +/** + * e1000_config_collision_dist_82575 - Configure collision distance + * @hw: pointer to the HW structure + * + * Configures the collision distance to the default value and is used + * during link setup. + **/ +static void e1000_config_collision_dist_82575(struct e1000_hw *hw) +{ + u32 tctl_ext; + + DEBUGFUNC("e1000_config_collision_dist_82575"); + + tctl_ext = E1000_READ_REG(hw, E1000_TCTL_EXT); + + tctl_ext &= ~E1000_TCTL_EXT_COLD; + tctl_ext |= E1000_COLLISION_DISTANCE << E1000_TCTL_EXT_COLD_SHIFT; + + E1000_WRITE_REG(hw, E1000_TCTL_EXT, tctl_ext); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_power_down_phy_copper_82575 - Remove link during PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, remove the link. + **/ +static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + + if (!(phy->ops.check_reset_block)) + return; + + /* If the management interface is not enabled, then power down */ + if (!(e1000_enable_mng_pass_thru(hw) || phy->ops.check_reset_block(hw))) + e1000_power_down_phy_copper(hw); + + return; +} + +/** + * e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters + * @hw: pointer to the HW structure + * + * Clears the hardware counters by reading the counter registers. + **/ +static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_clear_hw_cntrs_82575"); + + e1000_clear_hw_cntrs_base_generic(hw); + + E1000_READ_REG(hw, E1000_PRC64); + E1000_READ_REG(hw, E1000_PRC127); + E1000_READ_REG(hw, E1000_PRC255); + E1000_READ_REG(hw, E1000_PRC511); + E1000_READ_REG(hw, E1000_PRC1023); + E1000_READ_REG(hw, E1000_PRC1522); + E1000_READ_REG(hw, E1000_PTC64); + E1000_READ_REG(hw, E1000_PTC127); + E1000_READ_REG(hw, E1000_PTC255); + E1000_READ_REG(hw, E1000_PTC511); + E1000_READ_REG(hw, E1000_PTC1023); + E1000_READ_REG(hw, E1000_PTC1522); + + E1000_READ_REG(hw, E1000_ALGNERRC); + E1000_READ_REG(hw, E1000_RXERRC); + E1000_READ_REG(hw, E1000_TNCRS); + E1000_READ_REG(hw, E1000_CEXTERR); + E1000_READ_REG(hw, E1000_TSCTC); + E1000_READ_REG(hw, E1000_TSCTFC); + + E1000_READ_REG(hw, E1000_MGTPRC); + E1000_READ_REG(hw, E1000_MGTPDC); + E1000_READ_REG(hw, E1000_MGTPTC); + + E1000_READ_REG(hw, E1000_IAC); + E1000_READ_REG(hw, E1000_ICRXOC); + + E1000_READ_REG(hw, E1000_ICRXPTC); + E1000_READ_REG(hw, E1000_ICRXATC); + E1000_READ_REG(hw, E1000_ICTXPTC); + E1000_READ_REG(hw, E1000_ICTXATC); + E1000_READ_REG(hw, E1000_ICTXQEC); + E1000_READ_REG(hw, E1000_ICTXQMTC); + E1000_READ_REG(hw, E1000_ICRXDMTC); + + E1000_READ_REG(hw, E1000_CBTMPC); + E1000_READ_REG(hw, E1000_HTDPMC); + E1000_READ_REG(hw, E1000_CBRMPC); + E1000_READ_REG(hw, E1000_RPTHC); + E1000_READ_REG(hw, E1000_HGPTC); + E1000_READ_REG(hw, E1000_HTCBDPC); + E1000_READ_REG(hw, E1000_HGORCL); + E1000_READ_REG(hw, E1000_HGORCH); + E1000_READ_REG(hw, E1000_HGOTCL); + E1000_READ_REG(hw, E1000_HGOTCH); + E1000_READ_REG(hw, E1000_LENERRS); + + /* This register should not be read in copper configurations */ + if ((hw->phy.media_type == e1000_media_type_internal_serdes) || + e1000_sgmii_active_82575(hw)) + E1000_READ_REG(hw, E1000_SCVPC); +} + +/** + * e1000_rx_fifo_flush_82575 - Clean rx fifo after Rx enable + * @hw: pointer to the HW structure + * + * After Rx enable, if manageability is enabled then there is likely some + * bad data at the start of the fifo and possibly in the DMA fifo. This + * function clears the fifos and flushes any packets that came in as rx was + * being enabled. + **/ +void e1000_rx_fifo_flush_82575(struct e1000_hw *hw) +{ + u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled; + int i, ms_wait; + + DEBUGFUNC("e1000_rx_fifo_flush_82575"); + + /* disable IPv6 options as per hardware errata */ + rfctl = E1000_READ_REG(hw, E1000_RFCTL); + rfctl |= E1000_RFCTL_IPV6_EX_DIS; + E1000_WRITE_REG(hw, E1000_RFCTL, rfctl); + + if (hw->mac.type != e1000_82575 || + !(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN)) + return; + + /* Disable all Rx queues */ + for (i = 0; i < 4; i++) { + rxdctl[i] = E1000_READ_REG(hw, E1000_RXDCTL(i)); + E1000_WRITE_REG(hw, E1000_RXDCTL(i), + rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE); + } + /* Poll all queues to verify they have shut down */ + for (ms_wait = 0; ms_wait < 10; ms_wait++) { + msec_delay(1); + rx_enabled = 0; + for (i = 0; i < 4; i++) + rx_enabled |= E1000_READ_REG(hw, E1000_RXDCTL(i)); + if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE)) + break; + } + + if (ms_wait == 10) + DEBUGOUT("Queue disable timed out after 10ms\n"); + + /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all + * incoming packets are rejected. Set enable and wait 2ms so that + * any packet that was coming in as RCTL.EN was set is flushed + */ + E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF); + + rlpml = E1000_READ_REG(hw, E1000_RLPML); + E1000_WRITE_REG(hw, E1000_RLPML, 0); + + rctl = E1000_READ_REG(hw, E1000_RCTL); + temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP); + temp_rctl |= E1000_RCTL_LPE; + + E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl); + E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl | E1000_RCTL_EN); + E1000_WRITE_FLUSH(hw); + msec_delay(2); + + /* Enable Rx queues that were previously enabled and restore our + * previous state + */ + for (i = 0; i < 4; i++) + E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl[i]); + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + E1000_WRITE_FLUSH(hw); + + E1000_WRITE_REG(hw, E1000_RLPML, rlpml); + E1000_WRITE_REG(hw, E1000_RFCTL, rfctl); + + /* Flush receive errors generated by workaround */ + E1000_READ_REG(hw, E1000_ROC); + E1000_READ_REG(hw, E1000_RNBC); + E1000_READ_REG(hw, E1000_MPC); +} + +/** + * e1000_set_pcie_completion_timeout - set pci-e completion timeout + * @hw: pointer to the HW structure + * + * The defaults for 82575 and 82576 should be in the range of 50us to 50ms, + * however the hardware default for these parts is 500us to 1ms which is less + * than the 10ms recommended by the pci-e spec. To address this we need to + * increase the value to either 10ms to 200ms for capability version 1 config, + * or 16ms to 55ms for version 2. + **/ +static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw) +{ + u32 gcr = E1000_READ_REG(hw, E1000_GCR); + s32 ret_val = E1000_SUCCESS; + u16 pcie_devctl2; + + /* only take action if timeout value is defaulted to 0 */ + if (gcr & E1000_GCR_CMPL_TMOUT_MASK) + goto out; + + /* + * if capababilities version is type 1 we can write the + * timeout of 10ms to 200ms through the GCR register + */ + if (!(gcr & E1000_GCR_CAP_VER2)) { + gcr |= E1000_GCR_CMPL_TMOUT_10ms; + goto out; + } + + /* + * for version 2 capabilities we need to write the config space + * directly in order to set the completion timeout value for + * 16ms to 55ms + */ + ret_val = e1000_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, + &pcie_devctl2); + if (ret_val) + goto out; + + pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms; + + ret_val = e1000_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, + &pcie_devctl2); +out: + /* disable completion timeout resend */ + gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND; + + E1000_WRITE_REG(hw, E1000_GCR, gcr); + return ret_val; +} + +/** + * e1000_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing + * @hw: pointer to the hardware struct + * @enable: state to enter, either enabled or disabled + * @pf: Physical Function pool - do not set anti-spoofing for the PF + * + * enables/disables L2 switch anti-spoofing functionality. + **/ +void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf) +{ + u32 reg_val, reg_offset; + + switch (hw->mac.type) { + case e1000_82576: + reg_offset = E1000_DTXSWC; + break; + case e1000_i350: + case e1000_i354: + reg_offset = E1000_TXSWC; + break; + default: + return; + } + + reg_val = E1000_READ_REG(hw, reg_offset); + if (enable) { + reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); + /* The PF can spoof - it has to in order to + * support emulation mode NICs + */ + reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); + } else { + reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); + } + E1000_WRITE_REG(hw, reg_offset, reg_val); +} + +/** + * e1000_vmdq_set_loopback_pf - enable or disable vmdq loopback + * @hw: pointer to the hardware struct + * @enable: state to enter, either enabled or disabled + * + * enables/disables L2 switch loopback functionality. + **/ +void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable) +{ + u32 dtxswc; + + switch (hw->mac.type) { + case e1000_82576: + dtxswc = E1000_READ_REG(hw, E1000_DTXSWC); + if (enable) + dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN; + else + dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; + E1000_WRITE_REG(hw, E1000_DTXSWC, dtxswc); + break; + case e1000_i350: + case e1000_i354: + dtxswc = E1000_READ_REG(hw, E1000_TXSWC); + if (enable) + dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN; + else + dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; + E1000_WRITE_REG(hw, E1000_TXSWC, dtxswc); + break; + default: + /* Currently no other hardware supports loopback */ + break; + } + + +} + +/** + * e1000_vmdq_set_replication_pf - enable or disable vmdq replication + * @hw: pointer to the hardware struct + * @enable: state to enter, either enabled or disabled + * + * enables/disables replication of packets across multiple pools. + **/ +void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable) +{ + u32 vt_ctl = E1000_READ_REG(hw, E1000_VT_CTL); + + if (enable) + vt_ctl |= E1000_VT_CTL_VM_REPL_EN; + else + vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN; + + E1000_WRITE_REG(hw, E1000_VT_CTL, vt_ctl); +} + +/** + * e1000_read_phy_reg_82580 - Read 82580 MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the MDI control register in the PHY at offset and stores the + * information read to data. + **/ +static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_read_phy_reg_82580"); + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_read_phy_reg_mdic(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_write_phy_reg_82580 - Write 82580 MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write to register at offset + * + * Writes data to MDI control register in the PHY at offset. + **/ +static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_write_phy_reg_82580"); + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_write_phy_reg_mdic(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits + * @hw: pointer to the HW structure + * + * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on + * the values found in the EEPROM. This addresses an issue in which these + * bits are not restored from EEPROM after reset. + **/ +static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u32 mdicnfg; + u16 nvm_data = 0; + + DEBUGFUNC("e1000_reset_mdicnfg_82580"); + + if (hw->mac.type != e1000_82580) + goto out; + if (!e1000_sgmii_active_82575(hw)) + goto out; + + ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + + NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, + &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + mdicnfg = E1000_READ_REG(hw, E1000_MDICNFG); + if (nvm_data & NVM_WORD24_EXT_MDIO) + mdicnfg |= E1000_MDICNFG_EXT_MDIO; + if (nvm_data & NVM_WORD24_COM_MDIO) + mdicnfg |= E1000_MDICNFG_COM_MDIO; + E1000_WRITE_REG(hw, E1000_MDICNFG, mdicnfg); +out: + return ret_val; +} + +/** + * e1000_reset_hw_82580 - Reset hardware + * @hw: pointer to the HW structure + * + * This resets function or entire device (all ports, etc.) + * to a known state. + **/ +static s32 e1000_reset_hw_82580(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + /* BH SW mailbox bit in SW_FW_SYNC */ + u16 swmbsw_mask = E1000_SW_SYNCH_MB; + u32 ctrl; + bool global_device_reset = hw->dev_spec._82575.global_device_reset; + + DEBUGFUNC("e1000_reset_hw_82580"); + + hw->dev_spec._82575.global_device_reset = FALSE; + + /* 82580 does not reliably do global_device_reset due to hw errata */ + if (hw->mac.type == e1000_82580) + global_device_reset = FALSE; + + /* Get current control state. */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + ret_val = e1000_disable_pcie_master_generic(hw); + if (ret_val) + DEBUGOUT("PCI-E Master disable polling has failed.\n"); + + DEBUGOUT("Masking off all interrupts\n"); + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + E1000_WRITE_REG(hw, E1000_RCTL, 0); + E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP); + E1000_WRITE_FLUSH(hw); + + msec_delay(10); + + /* Determine whether or not a global dev reset is requested */ + if (global_device_reset && hw->mac.ops.acquire_swfw_sync(hw, + swmbsw_mask)) + global_device_reset = FALSE; + + if (global_device_reset && !(E1000_READ_REG(hw, E1000_STATUS) & + E1000_STAT_DEV_RST_SET)) + ctrl |= E1000_CTRL_DEV_RST; + else + ctrl |= E1000_CTRL_RST; + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + switch (hw->device_id) { + case E1000_DEV_ID_DH89XXCC_SGMII: + break; + default: + E1000_WRITE_FLUSH(hw); + break; + } + + /* Add delay to insure DEV_RST or RST has time to complete */ + msec_delay(5); + + ret_val = e1000_get_auto_rd_done_generic(hw); + if (ret_val) { + /* + * When auto config read does not complete, do not + * return with an error. This can happen in situations + * where there is no eeprom and prevents getting link. + */ + DEBUGOUT("Auto Read Done did not complete\n"); + } + + /* clear global device reset status bit */ + E1000_WRITE_REG(hw, E1000_STATUS, E1000_STAT_DEV_RST_SET); + + /* Clear any pending interrupt events. */ + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + E1000_READ_REG(hw, E1000_ICR); + + ret_val = e1000_reset_mdicnfg_82580(hw); + if (ret_val) + DEBUGOUT("Could not reset MDICNFG based on EEPROM\n"); + + /* Install any alternate MAC address into RAR0 */ + ret_val = e1000_check_alt_mac_addr_generic(hw); + + /* Release semaphore */ + if (global_device_reset) + hw->mac.ops.release_swfw_sync(hw, swmbsw_mask); + + return ret_val; +} + +/** + * e1000_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual Rx PBA size + * @data: data received by reading RXPBS register + * + * The 82580 uses a table based approach for packet buffer allocation sizes. + * This function converts the retrieved value into the correct table value + * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 + * 0x0 36 72 144 1 2 4 8 16 + * 0x8 35 70 140 rsv rsv rsv rsv rsv + */ +u16 e1000_rxpbs_adjust_82580(u32 data) +{ + u16 ret_val = 0; + + if (data < E1000_82580_RXPBS_TABLE_SIZE) + ret_val = e1000_82580_rxpbs_table[data]; + + return ret_val; +} + +/** + * e1000_validate_nvm_checksum_with_offset - Validate EEPROM + * checksum + * @hw: pointer to the HW structure + * @offset: offset in words of the checksum protected region + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset) +{ + s32 ret_val = E1000_SUCCESS; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_validate_nvm_checksum_with_offset"); + + for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + checksum += nvm_data; + } + + if (checksum != (u16) NVM_SUM) { + DEBUGOUT("NVM Checksum Invalid\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_update_nvm_checksum_with_offset - Update EEPROM + * checksum + * @hw: pointer to the HW structure + * @offset: offset in words of the checksum protected region + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. + **/ +s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset) +{ + s32 ret_val; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_update_nvm_checksum_with_offset"); + + for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (u16) NVM_SUM - checksum; + ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1, + &checksum); + if (ret_val) + DEBUGOUT("NVM Write Error while updating checksum.\n"); + +out: + return ret_val; +} + +/** + * e1000_validate_nvm_checksum_82580 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM section checksum by reading/adding each word of + * the EEPROM and then verifies that the sum of the EEPROM is + * equal to 0xBABA. + **/ +static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw) +{ + s32 ret_val; + u16 eeprom_regions_count = 1; + u16 j, nvm_data; + u16 nvm_offset; + + DEBUGFUNC("e1000_validate_nvm_checksum_82580"); + + ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) { + /* if chekcsums compatibility bit is set validate checksums + * for all 4 ports. */ + eeprom_regions_count = 4; + } + + for (j = 0; j < eeprom_regions_count; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_validate_nvm_checksum_with_offset(hw, + nvm_offset); + if (ret_val != E1000_SUCCESS) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_update_nvm_checksum_82580 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM section checksums for all 4 ports by reading/adding + * each word of the EEPROM up to the checksum. Then calculates the EEPROM + * checksum and writes the value to the EEPROM. + **/ +static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw) +{ + s32 ret_val; + u16 j, nvm_data; + u16 nvm_offset; + + DEBUGFUNC("e1000_update_nvm_checksum_82580"); + + ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error while updating checksum compatibility bit.\n"); + goto out; + } + + if (!(nvm_data & NVM_COMPATIBILITY_BIT_MASK)) { + /* set compatibility bit to validate checksums appropriately */ + nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK; + ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1, + &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Write Error while updating checksum compatibility bit.\n"); + goto out; + } + } + + for (j = 0; j < 4; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset); + if (ret_val) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_validate_nvm_checksum_i350 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM section checksum by reading/adding each word of + * the EEPROM and then verifies that the sum of the EEPROM is + * equal to 0xBABA. + **/ +static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 j; + u16 nvm_offset; + + DEBUGFUNC("e1000_validate_nvm_checksum_i350"); + + for (j = 0; j < 4; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_validate_nvm_checksum_with_offset(hw, + nvm_offset); + if (ret_val != E1000_SUCCESS) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_update_nvm_checksum_i350 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM section checksums for all 4 ports by reading/adding + * each word of the EEPROM up to the checksum. Then calculates the EEPROM + * checksum and writes the value to the EEPROM. + **/ +static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 j; + u16 nvm_offset; + + DEBUGFUNC("e1000_update_nvm_checksum_i350"); + + for (j = 0; j < 4; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset); + if (ret_val != E1000_SUCCESS) + goto out; + } + +out: + return ret_val; +} + +/** + * __e1000_access_emi_reg - Read/write EMI register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: pointer to value to read/write from/to the EMI address + * @read: boolean flag to indicate read or write + **/ +static s32 __e1000_access_emi_reg(struct e1000_hw *hw, u16 address, + u16 *data, bool read) +{ + s32 ret_val; + + DEBUGFUNC("__e1000_access_emi_reg"); + + ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address); + if (ret_val) + return ret_val; + + if (read) + ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA, data); + else + ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data); + + return ret_val; +} + +/** + * e1000_read_emi_reg - Read Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be read from the EMI address + **/ +s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data) +{ + DEBUGFUNC("e1000_read_emi_reg"); + + return __e1000_access_emi_reg(hw, addr, data, TRUE); +} + +/** + * e1000_initialize_M88E1512_phy - Initialize M88E1512 PHY + * @hw: pointer to the HW structure + * + * Initialize Marverl 1512 to work correctly with Avoton. + **/ +s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_initialize_M88E1512_phy"); + + /* Check if this is correct PHY. */ + if (phy->id != M88E1512_E_PHY_ID) + goto out; + + /* Switch to PHY page 0xFF. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xCC0C); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159); + if (ret_val) + goto out; + + /* Switch to PHY page 0xFB. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB); + if (ret_val) + goto out; + + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0x000D); + if (ret_val) + goto out; + + /* Switch to PHY page 0x12. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12); + if (ret_val) + goto out; + + /* Change mode to SGMII-to-Copper */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001); + if (ret_val) + goto out; + + /* Return the PHY to page 0. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); + if (ret_val) + goto out; + + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + + msec_delay(1000); +out: + return ret_val; +} + +/** + * e1000_set_eee_i350 - Enable/disable EEE support + * @hw: pointer to the HW structure + * @adv1g: boolean flag enabling 1G EEE advertisement + * @adv100m: boolean flag enabling 100M EEE advertisement + * + * Enable/disable EEE based on setting in dev_spec structure. + * + **/ +s32 e1000_set_eee_i350(struct e1000_hw *hw, bool adv1G, bool adv100M) +{ + u32 ipcnfg, eeer; + + DEBUGFUNC("e1000_set_eee_i350"); + + if ((hw->mac.type < e1000_i350) || + (hw->phy.media_type != e1000_media_type_copper)) + goto out; + ipcnfg = E1000_READ_REG(hw, E1000_IPCNFG); + eeer = E1000_READ_REG(hw, E1000_EEER); + + /* enable or disable per user setting */ + if (!(hw->dev_spec._82575.eee_disable)) { + u32 eee_su = E1000_READ_REG(hw, E1000_EEE_SU); + + if (adv100M) + ipcnfg |= E1000_IPCNFG_EEE_100M_AN; + else + ipcnfg &= ~E1000_IPCNFG_EEE_100M_AN; + + if (adv1G) + ipcnfg |= E1000_IPCNFG_EEE_1G_AN; + else + ipcnfg &= ~E1000_IPCNFG_EEE_1G_AN; + + eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | + E1000_EEER_LPI_FC); + + /* This bit should not be set in normal operation. */ + if (eee_su & E1000_EEE_SU_LPI_CLK_STP) + DEBUGOUT("LPI Clock Stop Bit should not be set!\n"); + } else { + ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); + eeer &= ~(E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | + E1000_EEER_LPI_FC); + } + E1000_WRITE_REG(hw, E1000_IPCNFG, ipcnfg); + E1000_WRITE_REG(hw, E1000_EEER, eeer); + E1000_READ_REG(hw, E1000_IPCNFG); + E1000_READ_REG(hw, E1000_EEER); +out: + + return E1000_SUCCESS; +} + +/** + * e1000_set_eee_i354 - Enable/disable EEE support + * @hw: pointer to the HW structure + * @adv1g: boolean flag enabling 1G EEE advertisement + * @adv100m: boolean flag enabling 100M EEE advertisement + * + * Enable/disable EEE legacy mode based on setting in dev_spec structure. + * + **/ +s32 e1000_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_data; + + DEBUGFUNC("e1000_set_eee_i354"); + + if ((hw->phy.media_type != e1000_media_type_copper) || + ((phy->id != M88E1543_E_PHY_ID) && + (phy->id != M88E1512_E_PHY_ID))) + goto out; + + if (!hw->dev_spec._82575.eee_disable) { + /* Switch to PHY page 18. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18); + if (ret_val) + goto out; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1543_EEE_CTRL_1, + &phy_data); + if (ret_val) + goto out; + + phy_data |= E1000_M88E1543_EEE_CTRL_1_MS; + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1, + phy_data); + if (ret_val) + goto out; + + /* Return the PHY to page 0. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); + if (ret_val) + goto out; + + /* Turn on EEE advertisement. */ + ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + if (adv100M) + phy_data |= E1000_EEE_ADV_100_SUPPORTED; + else + phy_data &= ~E1000_EEE_ADV_100_SUPPORTED; + + if (adv1G) + phy_data |= E1000_EEE_ADV_1000_SUPPORTED; + else + phy_data &= ~E1000_EEE_ADV_1000_SUPPORTED; + + ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + phy_data); + } else { + /* Turn off EEE advertisement. */ + ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED | + E1000_EEE_ADV_1000_SUPPORTED); + ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + phy_data); + } + +out: + return ret_val; +} + +/** + * e1000_get_eee_status_i354 - Get EEE status + * @hw: pointer to the HW structure + * @status: EEE status + * + * Get EEE status by guessing based on whether Tx or Rx LPI indications have + * been received. + **/ +s32 e1000_get_eee_status_i354(struct e1000_hw *hw, bool *status) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_data; + + DEBUGFUNC("e1000_get_eee_status_i354"); + + /* Check if EEE is supported on this device. */ + if ((hw->phy.media_type != e1000_media_type_copper) || + ((phy->id != M88E1543_E_PHY_ID) && + (phy->id != M88E1512_E_PHY_ID))) + goto out; + + ret_val = e1000_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354, + E1000_PCS_STATUS_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + *status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD | + E1000_PCS_STATUS_RX_LPI_RCVD) ? TRUE : FALSE; + +out: + return ret_val; +} + +/* Due to a hw errata, if the host tries to configure the VFTA register + * while performing queries from the BMC or DMA, then the VFTA in some + * cases won't be written. + */ + +/** + * e1000_clear_vfta_i350 - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * Clears the register array which contains the VLAN filter table by + * setting all the values to 0. + **/ +void e1000_clear_vfta_i350(struct e1000_hw *hw) +{ + u32 offset; + int i; + + DEBUGFUNC("e1000_clear_vfta_350"); + + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + for (i = 0; i < 10; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); + + E1000_WRITE_FLUSH(hw); + } +} + +/** + * e1000_write_vfta_i350 - Write value to VLAN filter table + * @hw: pointer to the HW structure + * @offset: register offset in VLAN filter table + * @value: register value written to VLAN filter table + * + * Writes value at the given offset in the register array which stores + * the VLAN filter table. + **/ +void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value) +{ + int i; + + DEBUGFUNC("e1000_write_vfta_350"); + + for (i = 0; i < 10; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); + + E1000_WRITE_FLUSH(hw); +} + + +/** + * e1000_set_i2c_bb - Enable I2C bit-bang + * @hw: pointer to the HW structure + * + * Enable I2C bit-bang interface + * + **/ +s32 e1000_set_i2c_bb(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u32 ctrl_ext, i2cparams; + + DEBUGFUNC("e1000_set_i2c_bb"); + + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext |= E1000_CTRL_I2C_ENA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); + + i2cparams = E1000_READ_REG(hw, E1000_I2CPARAMS); + i2cparams |= E1000_I2CBB_EN; + i2cparams |= E1000_I2C_DATA_OE_N; + i2cparams |= E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cparams); + E1000_WRITE_FLUSH(hw); + + return ret_val; +} + +/** + * e1000_read_i2c_byte_generic - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: device address + * @data: value read + * + * Performs byte read operation over I2C interface at + * a specified device address. + **/ +s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + s32 status = E1000_SUCCESS; + u32 max_retry = 10; + u32 retry = 1; + u16 swfw_mask = 0; + + bool nack = TRUE; + + DEBUGFUNC("e1000_read_i2c_byte_generic"); + + swfw_mask = E1000_SWFW_PHY0_SM; + + do { + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) + != E1000_SUCCESS) { + status = E1000_ERR_SWFW_SYNC; + goto read_byte_out; + } + + e1000_i2c_start(hw); + + /* Device Address and write indication */ + status = e1000_clock_out_i2c_byte(hw, dev_addr); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_byte(hw, byte_offset); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + e1000_i2c_start(hw); + + /* Device Address and read indication */ + status = e1000_clock_out_i2c_byte(hw, (dev_addr | 0x1)); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_in_i2c_byte(hw, data); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_bit(hw, nack); + if (status != E1000_SUCCESS) + goto fail; + + e1000_i2c_stop(hw); + break; + +fail: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msec_delay(100); + e1000_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + DEBUGOUT("I2C byte read error - Retrying.\n"); + else + DEBUGOUT("I2C byte read error.\n"); + + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +read_byte_out: + + return status; +} + +/** + * e1000_write_i2c_byte_generic - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: value to write + * + * Performs byte write operation over I2C interface at + * a specified device address. + **/ +s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + s32 status = E1000_SUCCESS; + u32 max_retry = 1; + u32 retry = 0; + u16 swfw_mask = 0; + + DEBUGFUNC("e1000_write_i2c_byte_generic"); + + swfw_mask = E1000_SWFW_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) { + status = E1000_ERR_SWFW_SYNC; + goto write_byte_out; + } + + do { + e1000_i2c_start(hw); + + status = e1000_clock_out_i2c_byte(hw, dev_addr); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_byte(hw, byte_offset); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_byte(hw, data); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + e1000_i2c_stop(hw); + break; + +fail: + e1000_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + DEBUGOUT("I2C byte write error - Retrying.\n"); + else + DEBUGOUT("I2C byte write error.\n"); + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +write_byte_out: + + return status; +} + +/** + * e1000_i2c_start - Sets I2C start condition + * @hw: pointer to hardware structure + * + * Sets I2C start condition (High -> Low on SDA while SCL is High) + **/ +static void e1000_i2c_start(struct e1000_hw *hw) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_i2c_start"); + + /* Start condition must begin with data and clock high */ + e1000_set_i2c_data(hw, &i2cctl, 1); + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for start condition (4.7us) */ + usec_delay(E1000_I2C_T_SU_STA); + + e1000_set_i2c_data(hw, &i2cctl, 0); + + /* Hold time for start condition (4us) */ + usec_delay(E1000_I2C_T_HD_STA); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + usec_delay(E1000_I2C_T_LOW); + +} + +/** + * e1000_i2c_stop - Sets I2C stop condition + * @hw: pointer to hardware structure + * + * Sets I2C stop condition (Low -> High on SDA while SCL is High) + **/ +static void e1000_i2c_stop(struct e1000_hw *hw) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_i2c_stop"); + + /* Stop condition must begin with data low and clock high */ + e1000_set_i2c_data(hw, &i2cctl, 0); + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for stop condition (4us) */ + usec_delay(E1000_I2C_T_SU_STO); + + e1000_set_i2c_data(hw, &i2cctl, 1); + + /* bus free time between stop and start (4.7us)*/ + usec_delay(E1000_I2C_T_BUF); +} + +/** + * e1000_clock_in_i2c_byte - Clocks in one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte to clock in + * + * Clocks in one byte data via I2C data/clock + **/ +static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data) +{ + s32 i; + bool bit = 0; + + DEBUGFUNC("e1000_clock_in_i2c_byte"); + + *data = 0; + for (i = 7; i >= 0; i--) { + e1000_clock_in_i2c_bit(hw, &bit); + *data |= bit << i; + } + + return E1000_SUCCESS; +} + +/** + * e1000_clock_out_i2c_byte - Clocks out one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte clocked out + * + * Clocks out one byte data via I2C data/clock + **/ +static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data) +{ + s32 status = E1000_SUCCESS; + s32 i; + u32 i2cctl; + bool bit = 0; + + DEBUGFUNC("e1000_clock_out_i2c_byte"); + + for (i = 7; i >= 0; i--) { + bit = (data >> i) & 0x1; + status = e1000_clock_out_i2c_bit(hw, bit); + + if (status != E1000_SUCCESS) + break; + } + + /* Release SDA line (set high) */ + i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + i2cctl |= E1000_I2C_DATA_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); + E1000_WRITE_FLUSH(hw); + + return status; +} + +/** + * e1000_get_i2c_ack - Polls for I2C ACK + * @hw: pointer to hardware structure + * + * Clocks in/out one bit via I2C data/clock + **/ +static s32 e1000_get_i2c_ack(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u32 i = 0; + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + u32 timeout = 10; + bool ack = TRUE; + + DEBUGFUNC("e1000_get_i2c_ack"); + + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + /* Wait until SCL returns high */ + for (i = 0; i < timeout; i++) { + usec_delay(1); + i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + if (i2cctl & E1000_I2C_CLK_IN) + break; + } + if (!(i2cctl & E1000_I2C_CLK_IN)) + return E1000_ERR_I2C; + + ack = e1000_get_i2c_data(&i2cctl); + if (ack) { + DEBUGOUT("I2C ack was not received.\n"); + status = E1000_ERR_I2C; + } + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + usec_delay(E1000_I2C_T_LOW); + + return status; +} + +/** + * e1000_clock_in_i2c_bit - Clocks in one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: read data value + * + * Clocks in one bit via I2C data/clock + **/ +static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_clock_in_i2c_bit"); + + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + *data = e1000_get_i2c_data(&i2cctl); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + usec_delay(E1000_I2C_T_LOW); + + return E1000_SUCCESS; +} + +/** + * e1000_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: data value to write + * + * Clocks out one bit via I2C data/clock + **/ +static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data) +{ + s32 status; + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_clock_out_i2c_bit"); + + status = e1000_set_i2c_data(hw, &i2cctl, data); + if (status == E1000_SUCCESS) { + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us. + * This also takes care of the data hold time. + */ + usec_delay(E1000_I2C_T_LOW); + } else { + status = E1000_ERR_I2C; + DEBUGOUT1("I2C data was not set to %X\n", data); + } + + return status; +} +/** + * e1000_raise_i2c_clk - Raises the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Raises the I2C clock line '0'->'1' + **/ +static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl) +{ + DEBUGFUNC("e1000_raise_i2c_clk"); + + *i2cctl |= E1000_I2C_CLK_OUT; + *i2cctl &= ~E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); + E1000_WRITE_FLUSH(hw); + + /* SCL rise time (1000ns) */ + usec_delay(E1000_I2C_T_RISE); +} + +/** + * e1000_lower_i2c_clk - Lowers the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Lowers the I2C clock line '1'->'0' + **/ +static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl) +{ + + DEBUGFUNC("e1000_lower_i2c_clk"); + + *i2cctl &= ~E1000_I2C_CLK_OUT; + *i2cctl &= ~E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); + E1000_WRITE_FLUSH(hw); + + /* SCL fall time (300ns) */ + usec_delay(E1000_I2C_T_FALL); +} + +/** + * e1000_set_i2c_data - Sets the I2C data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * @data: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + **/ +static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data) +{ + s32 status = E1000_SUCCESS; + + DEBUGFUNC("e1000_set_i2c_data"); + + if (data) + *i2cctl |= E1000_I2C_DATA_OUT; + else + *i2cctl &= ~E1000_I2C_DATA_OUT; + + *i2cctl &= ~E1000_I2C_DATA_OE_N; + *i2cctl |= E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); + E1000_WRITE_FLUSH(hw); + + /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ + usec_delay(E1000_I2C_T_RISE + E1000_I2C_T_FALL + E1000_I2C_T_SU_DATA); + + *i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + if (data != e1000_get_i2c_data(i2cctl)) { + status = E1000_ERR_I2C; + DEBUGOUT1("Error - I2C data was not set to %X.\n", data); + } + + return status; +} + +/** + * e1000_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + **/ +static bool e1000_get_i2c_data(u32 *i2cctl) +{ + bool data; + + DEBUGFUNC("e1000_get_i2c_data"); + + if (*i2cctl & E1000_I2C_DATA_IN) + data = 1; + else + data = 0; + + return data; +} + +/** + * e1000_i2c_bus_clear - Clears the I2C bus + * @hw: pointer to hardware structure + * + * Clears the I2C bus by sending nine clock pulses. + * Used when data line is stuck low. + **/ +void e1000_i2c_bus_clear(struct e1000_hw *hw) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + u32 i; + + DEBUGFUNC("e1000_i2c_bus_clear"); + + e1000_i2c_start(hw); + + e1000_set_i2c_data(hw, &i2cctl, 1); + + for (i = 0; i < 9; i++) { + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Min high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Min low period of clock is 4.7us*/ + usec_delay(E1000_I2C_T_LOW); + } + + e1000_i2c_start(hw); + + /* Put the i2c bus back to default state */ + e1000_i2c_stop(hw); +} + Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_82575.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_82575.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_82575.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_82575.h (revision 291673) @@ -0,0 +1,521 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_82575_H_ +#define _E1000_82575_H_ + +#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_DEF1_DEF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_OFF1_ON2)) +/* + * Receive Address Register Count + * Number of high/low register pairs in the RAR. The RAR (Receive Address + * Registers) holds the directed and multicast addresses that we monitor. + * These entries are also used for MAC-based filtering. + */ +/* + * For 82576, there are an additional set of RARs that begin at an offset + * separate from the first set of RARs. + */ +#define E1000_RAR_ENTRIES_82575 16 +#define E1000_RAR_ENTRIES_82576 24 +#define E1000_RAR_ENTRIES_82580 24 +#define E1000_RAR_ENTRIES_I350 32 +#define E1000_SW_SYNCH_MB 0x00000100 +#define E1000_STAT_DEV_RST_SET 0x00100000 +#define E1000_CTRL_DEV_RST 0x20000000 + +#ifdef E1000_BIT_FIELDS +struct e1000_adv_data_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + union { + u32 data; + struct { + u32 datalen:16; /* Data buffer length */ + u32 rsvd:4; + u32 dtyp:4; /* Descriptor type */ + u32 dcmd:8; /* Descriptor command */ + } config; + } lower; + union { + u32 data; + struct { + u32 status:4; /* Descriptor status */ + u32 idx:4; + u32 popts:6; /* Packet Options */ + u32 paylen:18; /* Payload length */ + } options; + } upper; +}; + +#define E1000_TXD_DTYP_ADV_C 0x2 /* Advanced Context Descriptor */ +#define E1000_TXD_DTYP_ADV_D 0x3 /* Advanced Data Descriptor */ +#define E1000_ADV_TXD_CMD_DEXT 0x20 /* Descriptor extension (0 = legacy) */ +#define E1000_ADV_TUCMD_IPV4 0x2 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADV_TUCMD_IPV6 0x0 /* IP Packet Type: 0=IPv6 */ +#define E1000_ADV_TUCMD_L4T_UDP 0x0 /* L4 Packet TYPE of UDP */ +#define E1000_ADV_TUCMD_L4T_TCP 0x4 /* L4 Packet TYPE of TCP */ +#define E1000_ADV_TUCMD_MKRREQ 0x10 /* Indicates markers are required */ +#define E1000_ADV_DCMD_EOP 0x1 /* End of Packet */ +#define E1000_ADV_DCMD_IFCS 0x2 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADV_DCMD_RS 0x8 /* Report Status */ +#define E1000_ADV_DCMD_VLE 0x40 /* Add VLAN tag */ +#define E1000_ADV_DCMD_TSE 0x80 /* TCP Seg enable */ +/* Extended Device Control */ +#define E1000_CTRL_EXT_NSICR 0x00000001 /* Disable Intr Clear all on read */ + +struct e1000_adv_context_desc { + union { + u32 ip_config; + struct { + u32 iplen:9; + u32 maclen:7; + u32 vlan_tag:16; + } fields; + } ip_setup; + u32 seq_num; + union { + u64 l4_config; + struct { + u32 mkrloc:9; + u32 tucmd:11; + u32 dtyp:4; + u32 adv:8; + u32 rsvd:4; + u32 idx:4; + u32 l4len:8; + u32 mss:16; + } fields; + } l4_setup; +}; +#endif + +/* SRRCTL bit definitions */ +#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ +#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00 +#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */ +#define E1000_SRRCTL_DESCTYPE_LEGACY 0x00000000 +#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 +#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION 0x06000000 +#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000 +#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000 +#define E1000_SRRCTL_TIMESTAMP 0x40000000 +#define E1000_SRRCTL_DROP_EN 0x80000000 + +#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F +#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00 + +#define E1000_TX_HEAD_WB_ENABLE 0x1 +#define E1000_TX_SEQNUM_WB_ENABLE 0x2 + +#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002 +#define E1000_MRQC_ENABLE_VMDQ 0x00000003 +#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005 +#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 +#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 +#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000 +#define E1000_MRQC_ENABLE_RSS_8Q 0x00000002 + +#define E1000_VMRCTL_MIRROR_PORT_SHIFT 8 +#define E1000_VMRCTL_MIRROR_DSTPORT_MASK (7 << \ + E1000_VMRCTL_MIRROR_PORT_SHIFT) +#define E1000_VMRCTL_POOL_MIRROR_ENABLE (1 << 0) +#define E1000_VMRCTL_UPLINK_MIRROR_ENABLE (1 << 1) +#define E1000_VMRCTL_DOWNLINK_MIRROR_ENABLE (1 << 2) + +#define E1000_EICR_TX_QUEUE ( \ + E1000_EICR_TX_QUEUE0 | \ + E1000_EICR_TX_QUEUE1 | \ + E1000_EICR_TX_QUEUE2 | \ + E1000_EICR_TX_QUEUE3) + +#define E1000_EICR_RX_QUEUE ( \ + E1000_EICR_RX_QUEUE0 | \ + E1000_EICR_RX_QUEUE1 | \ + E1000_EICR_RX_QUEUE2 | \ + E1000_EICR_RX_QUEUE3) + +#define E1000_EIMS_RX_QUEUE E1000_EICR_RX_QUEUE +#define E1000_EIMS_TX_QUEUE E1000_EICR_TX_QUEUE + +#define EIMS_ENABLE_MASK ( \ + E1000_EIMS_RX_QUEUE | \ + E1000_EIMS_TX_QUEUE | \ + E1000_EIMS_TCP_TIMER | \ + E1000_EIMS_OTHER) + +/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */ +#define E1000_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */ +#define E1000_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */ +#define E1000_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */ +#define E1000_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */ +#define E1000_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */ +#define E1000_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */ +#define E1000_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */ +#define E1000_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */ +#define E1000_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */ +#define E1000_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of ctrl bits */ + +/* Receive Descriptor - Advanced */ +union e1000_adv_rx_desc { + struct { + __le64 pkt_addr; /* Packet buffer address */ + __le64 hdr_addr; /* Header buffer address */ + } read; + struct { + struct { + union { + __le32 data; + struct { + __le16 pkt_info; /*RSS type, Pkt type*/ + /* Split Header, header buffer len */ + __le16 hdr_info; + } hs_rss; + } lo_dword; + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length; /* Packet length */ + __le16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define E1000_RXDADV_RSSTYPE_MASK 0x0000000F +#define E1000_RXDADV_RSSTYPE_SHIFT 12 +#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0 +#define E1000_RXDADV_HDRBUFLEN_SHIFT 5 +#define E1000_RXDADV_SPLITHEADER_EN 0x00001000 +#define E1000_RXDADV_SPH 0x8000 +#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */ +#define E1000_RXDADV_STAT_TSIP 0x08000 /* timestamp in packet */ +#define E1000_RXDADV_ERR_HBO 0x00800000 + +/* RSS Hash results */ +#define E1000_RXDADV_RSSTYPE_NONE 0x00000000 +#define E1000_RXDADV_RSSTYPE_IPV4_TCP 0x00000001 +#define E1000_RXDADV_RSSTYPE_IPV4 0x00000002 +#define E1000_RXDADV_RSSTYPE_IPV6_TCP 0x00000003 +#define E1000_RXDADV_RSSTYPE_IPV6_EX 0x00000004 +#define E1000_RXDADV_RSSTYPE_IPV6 0x00000005 +#define E1000_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006 +#define E1000_RXDADV_RSSTYPE_IPV4_UDP 0x00000007 +#define E1000_RXDADV_RSSTYPE_IPV6_UDP 0x00000008 +#define E1000_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009 + +/* RSS Packet Types as indicated in the receive descriptor */ +#define E1000_RXDADV_PKTTYPE_ILMASK 0x000000F0 +#define E1000_RXDADV_PKTTYPE_TLMASK 0x00000F00 +#define E1000_RXDADV_PKTTYPE_NONE 0x00000000 +#define E1000_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPV4 hdr present */ +#define E1000_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPV4 hdr + extensions */ +#define E1000_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPV6 hdr present */ +#define E1000_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPV6 hdr + extensions */ +#define E1000_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */ +#define E1000_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */ +#define E1000_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */ +#define E1000_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */ + +#define E1000_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */ +#define E1000_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */ +#define E1000_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */ +#define E1000_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */ +#define E1000_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */ +#define E1000_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */ + +/* LinkSec results */ +/* Security Processing bit Indication */ +#define E1000_RXDADV_LNKSEC_STATUS_SECP 0x00020000 +#define E1000_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000 +#define E1000_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000 +#define E1000_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000 +#define E1000_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000 + +#define E1000_RXDADV_IPSEC_STATUS_SECP 0x00020000 +#define E1000_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000 +#define E1000_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000 +#define E1000_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000 +#define E1000_RXDADV_IPSEC_ERROR_AUTHENTICATION_FAILED 0x18000000 + +/* Transmit Descriptor - Advanced */ +union e1000_adv_tx_desc { + struct { + __le64 buffer_addr; /* Address of descriptor's data buf */ + __le32 cmd_type_len; + __le32 olinfo_status; + } read; + struct { + __le64 rsvd; /* Reserved */ + __le32 nxtseq_seed; + __le32 status; + } wb; +}; + +/* Adv Transmit Descriptor Config Masks */ +#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ +#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ +#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */ +#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */ +#define E1000_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */ +#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */ +#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */ +#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ +#define E1000_ADVTXD_MAC_LINKSEC 0x00040000 /* Apply LinkSec on pkt */ +#define E1000_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 Timestamp pkt */ +#define E1000_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED prsnt in WB */ +#define E1000_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */ +#define E1000_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */ +#define E1000_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */ +#define E1000_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */ +/* 1st & Last TSO-full iSCSI PDU*/ +#define E1000_ADVTXD_POPTS_ISCO_FULL 0x00001800 +#define E1000_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */ +#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ + +/* Context descriptors */ +struct e1000_adv_tx_context_desc { + __le32 vlan_macip_lens; + __le32 seqnum_seed; + __le32 type_tucmd_mlhl; + __le32 mss_l4len_idx; +}; + +#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ +#define E1000_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */ +#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */ +#define E1000_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */ +#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ +#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */ +#define E1000_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */ +/* IPSec Encrypt Enable for ESP */ +#define E1000_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000 +/* Req requires Markers and CRC */ +#define E1000_ADVTXD_TUCMD_MKRREQ 0x00002000 +#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ +#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ +/* Adv ctxt IPSec SA IDX mask */ +#define E1000_ADVTXD_IPSEC_SA_INDEX_MASK 0x000000FF +/* Adv ctxt IPSec ESP len mask */ +#define E1000_ADVTXD_IPSEC_ESP_LEN_MASK 0x000000FF + +/* Additional Transmit Descriptor Control definitions */ +#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Tx Queue */ +#define E1000_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. wbk flushing */ +/* Tx Queue Arbitration Priority 0=low, 1=high */ +#define E1000_TXDCTL_PRIORITY 0x08000000 + +/* Additional Receive Descriptor Control definitions */ +#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Rx Queue */ +#define E1000_RXDCTL_SWFLSH 0x04000000 /* Rx Desc. wbk flushing */ + +/* Direct Cache Access (DCA) definitions */ +#define E1000_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */ +#define E1000_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */ + +#define E1000_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */ +#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ + +#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ +#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ +#define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header ena */ +#define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload ena */ +#define E1000_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx Desc Relax Order */ + +#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ +#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ +#define E1000_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */ +#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ +#define E1000_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */ + +#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */ +#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */ +#define E1000_DCA_TXCTRL_CPUID_SHIFT_82576 24 /* Tx CPUID */ +#define E1000_DCA_RXCTRL_CPUID_SHIFT_82576 24 /* Rx CPUID */ + +/* Additional interrupt register bit definitions */ +#define E1000_ICR_LSECPNS 0x00000020 /* PN threshold - server */ +#define E1000_IMS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ +#define E1000_ICS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ + +/* ETQF register bit definitions */ +#define E1000_ETQF_FILTER_ENABLE (1 << 26) +#define E1000_ETQF_IMM_INT (1 << 29) +#define E1000_ETQF_1588 (1 << 30) +#define E1000_ETQF_QUEUE_ENABLE (1 << 31) +/* + * ETQF filter list: one static filter per filter consumer. This is + * to avoid filter collisions later. Add new filters + * here!! + * + * Current filters: + * EAPOL 802.1x (0x888e): Filter 0 + */ +#define E1000_ETQF_FILTER_EAPOL 0 + +#define E1000_FTQF_VF_BP 0x00008000 +#define E1000_FTQF_1588_TIME_STAMP 0x08000000 +#define E1000_FTQF_MASK 0xF0000000 +#define E1000_FTQF_MASK_PROTO_BP 0x10000000 +#define E1000_FTQF_MASK_SOURCE_ADDR_BP 0x20000000 +#define E1000_FTQF_MASK_DEST_ADDR_BP 0x40000000 +#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000 + +#define E1000_NVM_APME_82575 0x0400 +#define MAX_NUM_VFS 7 + +#define E1000_DTXSWC_MAC_SPOOF_MASK 0x000000FF /* Per VF MAC spoof cntrl */ +#define E1000_DTXSWC_VLAN_SPOOF_MASK 0x0000FF00 /* Per VF VLAN spoof cntrl */ +#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */ +#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8 +#define E1000_DTXSWC_LLE_SHIFT 16 +#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */ + +/* Easy defines for setting default pool, would normally be left a zero */ +#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7 +#define E1000_VT_CTL_DEFAULT_POOL_MASK (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT) + +/* Other useful VMD_CTL register defines */ +#define E1000_VT_CTL_IGNORE_MAC (1 << 28) +#define E1000_VT_CTL_DISABLE_DEF_POOL (1 << 29) +#define E1000_VT_CTL_VM_REPL_EN (1 << 30) + +/* Per VM Offload register setup */ +#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */ +#define E1000_VMOLR_LPE 0x00010000 /* Accept Long packet */ +#define E1000_VMOLR_RSSE 0x00020000 /* Enable RSS */ +#define E1000_VMOLR_AUPE 0x01000000 /* Accept untagged packets */ +#define E1000_VMOLR_ROMPE 0x02000000 /* Accept overflow multicast */ +#define E1000_VMOLR_ROPE 0x04000000 /* Accept overflow unicast */ +#define E1000_VMOLR_BAM 0x08000000 /* Accept Broadcast packets */ +#define E1000_VMOLR_MPME 0x10000000 /* Multicast promiscuous mode */ +#define E1000_VMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ +#define E1000_VMOLR_STRCRC 0x80000000 /* CRC stripping enable */ + +#define E1000_VMOLR_VPE 0x00800000 /* VLAN promiscuous enable */ +#define E1000_VMOLR_UPE 0x20000000 /* Unicast promisuous enable */ +#define E1000_DVMOLR_HIDVLAN 0x20000000 /* Vlan hiding enable */ +#define E1000_DVMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ +#define E1000_DVMOLR_STRCRC 0x80000000 /* CRC stripping enable */ + +#define E1000_PBRWAC_WALPB 0x00000007 /* Wrap around event on LAN Rx PB */ +#define E1000_PBRWAC_PBE 0x00000008 /* Rx packet buffer empty */ + +#define E1000_VLVF_ARRAY_SIZE 32 +#define E1000_VLVF_VLANID_MASK 0x00000FFF +#define E1000_VLVF_POOLSEL_SHIFT 12 +#define E1000_VLVF_POOLSEL_MASK (0xFF << E1000_VLVF_POOLSEL_SHIFT) +#define E1000_VLVF_LVLAN 0x00100000 +#define E1000_VLVF_VLANID_ENABLE 0x80000000 + +#define E1000_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */ +#define E1000_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */ + +#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */ + +#define E1000_IOVCTL 0x05BBC +#define E1000_IOVCTL_REUSE_VFQ 0x00000001 + +#define E1000_RPLOLR_STRVLAN 0x40000000 +#define E1000_RPLOLR_STRCRC 0x80000000 + +#define E1000_TCTL_EXT_COLD 0x000FFC00 +#define E1000_TCTL_EXT_COLD_SHIFT 10 + +#define E1000_DTXCTL_8023LL 0x0004 +#define E1000_DTXCTL_VLAN_ADDED 0x0008 +#define E1000_DTXCTL_OOS_ENABLE 0x0010 +#define E1000_DTXCTL_MDP_EN 0x0020 +#define E1000_DTXCTL_SPOOF_INT 0x0040 + +#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT (1 << 14) + +#define ALL_QUEUES 0xFFFF + +/* Rx packet buffer size defines */ +#define E1000_RXPBS_SIZE_MASK_82576 0x0000007F +void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable); +void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf); +void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable); +s32 e1000_init_nvm_params_82575(struct e1000_hw *hw); +s32 e1000_init_hw_82575(struct e1000_hw *hw); + +enum e1000_promisc_type { + e1000_promisc_disabled = 0, /* all promisc modes disabled */ + e1000_promisc_unicast = 1, /* unicast promiscuous enabled */ + e1000_promisc_multicast = 2, /* multicast promiscuous enabled */ + e1000_promisc_enabled = 3, /* both uni and multicast promisc */ + e1000_num_promisc_types +}; + +void e1000_vfta_set_vf(struct e1000_hw *, u16, bool); +void e1000_rlpml_set_vf(struct e1000_hw *, u16); +s32 e1000_promisc_set_vf(struct e1000_hw *, enum e1000_promisc_type type); +u16 e1000_rxpbs_adjust_82580(u32 data); +s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data); +s32 e1000_set_eee_i350(struct e1000_hw *hw, bool adv1G, bool adv100M); +s32 e1000_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M); +s32 e1000_get_eee_status_i354(struct e1000_hw *, bool *); +s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw); + +/* I2C SDA and SCL timing parameters for standard mode */ +#define E1000_I2C_T_HD_STA 4 +#define E1000_I2C_T_LOW 5 +#define E1000_I2C_T_HIGH 4 +#define E1000_I2C_T_SU_STA 5 +#define E1000_I2C_T_HD_DATA 5 +#define E1000_I2C_T_SU_DATA 1 +#define E1000_I2C_T_RISE 1 +#define E1000_I2C_T_FALL 1 +#define E1000_I2C_T_SU_STO 4 +#define E1000_I2C_T_BUF 5 + +s32 e1000_set_i2c_bb(struct e1000_hw *hw); +s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +void e1000_i2c_bus_clear(struct e1000_hw *hw); +#endif /* _E1000_82575_H_ */ Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_82575.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_api.c =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_api.c (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_api.c (revision 291673) @@ -0,0 +1,1155 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#include "e1000_api.h" + +/** + * e1000_init_mac_params - Initialize MAC function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the MAC + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_mac_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->mac.ops.init_params) { + ret_val = hw->mac.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("MAC Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("mac.init_mac_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_init_nvm_params - Initialize NVM function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the NVM + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_nvm_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->nvm.ops.init_params) { + ret_val = hw->nvm.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("NVM Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("nvm.init_nvm_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_init_phy_params - Initialize PHY function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the PHY + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_phy_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->phy.ops.init_params) { + ret_val = hw->phy.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("PHY Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("phy.init_phy_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_init_mbx_params - Initialize mailbox function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the PHY + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_mbx_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->mbx.ops.init_params) { + ret_val = hw->mbx.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("Mailbox Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("mbx.init_mbx_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_set_mac_type - Sets MAC type + * @hw: pointer to the HW structure + * + * This function sets the mac type of the adapter based on the + * device ID stored in the hw structure. + * MUST BE FIRST FUNCTION CALLED (explicitly or through + * e1000_setup_init_funcs()). + **/ +s32 e1000_set_mac_type(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_set_mac_type"); + + switch (hw->device_id) { + case E1000_DEV_ID_82575EB_COPPER: + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82575GB_QUAD_COPPER: + mac->type = e1000_82575; + break; + case E1000_DEV_ID_82576: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + case E1000_DEV_ID_82576_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER_ET2: + case E1000_DEV_ID_82576_NS: + case E1000_DEV_ID_82576_NS_SERDES: + case E1000_DEV_ID_82576_SERDES_QUAD: + mac->type = e1000_82576; + break; + case E1000_DEV_ID_82580_COPPER: + case E1000_DEV_ID_82580_FIBER: + case E1000_DEV_ID_82580_SERDES: + case E1000_DEV_ID_82580_SGMII: + case E1000_DEV_ID_82580_COPPER_DUAL: + case E1000_DEV_ID_82580_QUAD_FIBER: + case E1000_DEV_ID_DH89XXCC_SGMII: + case E1000_DEV_ID_DH89XXCC_SERDES: + case E1000_DEV_ID_DH89XXCC_BACKPLANE: + case E1000_DEV_ID_DH89XXCC_SFP: + mac->type = e1000_82580; + break; + case E1000_DEV_ID_I350_COPPER: + case E1000_DEV_ID_I350_FIBER: + case E1000_DEV_ID_I350_SERDES: + case E1000_DEV_ID_I350_SGMII: + case E1000_DEV_ID_I350_DA4: + mac->type = e1000_i350; + break; + case E1000_DEV_ID_I210_COPPER_FLASHLESS: + case E1000_DEV_ID_I210_SERDES_FLASHLESS: + case E1000_DEV_ID_I210_COPPER: + case E1000_DEV_ID_I210_COPPER_OEM1: + case E1000_DEV_ID_I210_COPPER_IT: + case E1000_DEV_ID_I210_FIBER: + case E1000_DEV_ID_I210_SERDES: + case E1000_DEV_ID_I210_SGMII: + mac->type = e1000_i210; + break; + case E1000_DEV_ID_I211_COPPER: + mac->type = e1000_i211; + break; + case E1000_DEV_ID_82576_VF: + case E1000_DEV_ID_82576_VF_HV: + mac->type = e1000_vfadapt; + break; + case E1000_DEV_ID_I350_VF: + case E1000_DEV_ID_I350_VF_HV: + mac->type = e1000_vfadapt_i350; + break; + + case E1000_DEV_ID_I354_BACKPLANE_1GBPS: + case E1000_DEV_ID_I354_SGMII: + case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS: + mac->type = e1000_i354; + break; + default: + /* Should never have loaded on this device */ + ret_val = -E1000_ERR_MAC_INIT; + break; + } + + return ret_val; +} + +/** + * e1000_setup_init_funcs - Initializes function pointers + * @hw: pointer to the HW structure + * @init_device: TRUE will initialize the rest of the function pointers + * getting the device ready for use. FALSE will only set + * MAC type and the function pointers for the other init + * functions. Passing FALSE will not generate any hardware + * reads or writes. + * + * This function must be called by a driver in order to use the rest + * of the 'shared' code files. Called by drivers only. + **/ +s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device) +{ + s32 ret_val; + + /* Can't do much good without knowing the MAC type. */ + ret_val = e1000_set_mac_type(hw); + if (ret_val) { + DEBUGOUT("ERROR: MAC type could not be set properly.\n"); + goto out; + } + + if (!hw->hw_addr) { + DEBUGOUT("ERROR: Registers not mapped\n"); + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + /* + * Init function pointers to generic implementations. We do this first + * allowing a driver module to override it afterward. + */ + e1000_init_mac_ops_generic(hw); + e1000_init_phy_ops_generic(hw); + e1000_init_nvm_ops_generic(hw); + e1000_init_mbx_ops_generic(hw); + + /* + * Set up the init function pointers. These are functions within the + * adapter family file that sets up function pointers for the rest of + * the functions in that family. + */ + switch (hw->mac.type) { + case e1000_82575: + case e1000_82576: + case e1000_82580: + case e1000_i350: + case e1000_i354: + e1000_init_function_pointers_82575(hw); + break; + case e1000_i210: + case e1000_i211: + e1000_init_function_pointers_i210(hw); + break; + case e1000_vfadapt: + e1000_init_function_pointers_vf(hw); + break; + case e1000_vfadapt_i350: + e1000_init_function_pointers_vf(hw); + break; + default: + DEBUGOUT("Hardware not supported\n"); + ret_val = -E1000_ERR_CONFIG; + break; + } + + /* + * Initialize the rest of the function pointers. These require some + * register reads/writes in some cases. + */ + if (!(ret_val) && init_device) { + ret_val = e1000_init_mac_params(hw); + if (ret_val) + goto out; + + ret_val = e1000_init_nvm_params(hw); + if (ret_val) + goto out; + + ret_val = e1000_init_phy_params(hw); + if (ret_val) + goto out; + + ret_val = e1000_init_mbx_params(hw); + if (ret_val) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_get_bus_info - Obtain bus information for adapter + * @hw: pointer to the HW structure + * + * This will obtain information about the HW bus for which the + * adapter is attached and stores it in the hw structure. This is a + * function pointer entry point called by drivers. + **/ +s32 e1000_get_bus_info(struct e1000_hw *hw) +{ + if (hw->mac.ops.get_bus_info) + return hw->mac.ops.get_bus_info(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_clear_vfta - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * This clears the VLAN filter table on the adapter. This is a function + * pointer entry point called by drivers. + **/ +void e1000_clear_vfta(struct e1000_hw *hw) +{ + if (hw->mac.ops.clear_vfta) + hw->mac.ops.clear_vfta(hw); +} + +/** + * e1000_write_vfta - Write value to VLAN filter table + * @hw: pointer to the HW structure + * @offset: the 32-bit offset in which to write the value to. + * @value: the 32-bit value to write at location offset. + * + * This writes a 32-bit value to a 32-bit offset in the VLAN filter + * table. This is a function pointer entry point called by drivers. + **/ +void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) +{ + if (hw->mac.ops.write_vfta) + hw->mac.ops.write_vfta(hw, offset, value); +} + +/** + * e1000_update_mc_addr_list - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * + * Updates the Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + **/ +void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count) +{ + if (hw->mac.ops.update_mc_addr_list) + hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, + mc_addr_count); +} + +/** + * e1000_force_mac_fc - Force MAC flow control + * @hw: pointer to the HW structure + * + * Force the MAC's flow control settings. Currently no func pointer exists + * and all implementations are handled in the generic version of this + * function. + **/ +s32 e1000_force_mac_fc(struct e1000_hw *hw) +{ + return e1000_force_mac_fc_generic(hw); +} + +/** + * e1000_check_for_link - Check/Store link connection + * @hw: pointer to the HW structure + * + * This checks the link condition of the adapter and stores the + * results in the hw->mac structure. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_check_for_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.check_for_link) + return hw->mac.ops.check_for_link(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_check_mng_mode - Check management mode + * @hw: pointer to the HW structure + * + * This checks if the adapter has manageability enabled. + * This is a function pointer entry point called by drivers. + **/ +bool e1000_check_mng_mode(struct e1000_hw *hw) +{ + if (hw->mac.ops.check_mng_mode) + return hw->mac.ops.check_mng_mode(hw); + + return FALSE; +} + +/** + * e1000_mng_write_dhcp_info - Writes DHCP info to host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface + * @length: size of the buffer + * + * Writes the DHCP information to the host interface. + **/ +s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) +{ + return e1000_mng_write_dhcp_info_generic(hw, buffer, length); +} + +/** + * e1000_reset_hw - Reset hardware + * @hw: pointer to the HW structure + * + * This resets the hardware into a known state. This is a function pointer + * entry point called by drivers. + **/ +s32 e1000_reset_hw(struct e1000_hw *hw) +{ + if (hw->mac.ops.reset_hw) + return hw->mac.ops.reset_hw(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_init_hw - Initialize hardware + * @hw: pointer to the HW structure + * + * This inits the hardware readying it for operation. This is a function + * pointer entry point called by drivers. + **/ +s32 e1000_init_hw(struct e1000_hw *hw) +{ + if (hw->mac.ops.init_hw) + return hw->mac.ops.init_hw(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_setup_link - Configures link and flow control + * @hw: pointer to the HW structure + * + * This configures link and flow control settings for the adapter. This + * is a function pointer entry point called by drivers. While modules can + * also call this, they probably call their own version of this function. + **/ +s32 e1000_setup_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.setup_link) + return hw->mac.ops.setup_link(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_get_speed_and_duplex - Returns current speed and duplex + * @hw: pointer to the HW structure + * @speed: pointer to a 16-bit value to store the speed + * @duplex: pointer to a 16-bit value to store the duplex. + * + * This returns the speed and duplex of the adapter in the two 'out' + * variables passed in. This is a function pointer entry point called + * by drivers. + **/ +s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) +{ + if (hw->mac.ops.get_link_up_info) + return hw->mac.ops.get_link_up_info(hw, speed, duplex); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_setup_led - Configures SW controllable LED + * @hw: pointer to the HW structure + * + * This prepares the SW controllable LED for use and saves the current state + * of the LED so it can be later restored. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_setup_led(struct e1000_hw *hw) +{ + if (hw->mac.ops.setup_led) + return hw->mac.ops.setup_led(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_cleanup_led - Restores SW controllable LED + * @hw: pointer to the HW structure + * + * This restores the SW controllable LED to the value saved off by + * e1000_setup_led. This is a function pointer entry point called by drivers. + **/ +s32 e1000_cleanup_led(struct e1000_hw *hw) +{ + if (hw->mac.ops.cleanup_led) + return hw->mac.ops.cleanup_led(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_blink_led - Blink SW controllable LED + * @hw: pointer to the HW structure + * + * This starts the adapter LED blinking. Request the LED to be setup first + * and cleaned up after. This is a function pointer entry point called by + * drivers. + **/ +s32 e1000_blink_led(struct e1000_hw *hw) +{ + if (hw->mac.ops.blink_led) + return hw->mac.ops.blink_led(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_id_led_init - store LED configurations in SW + * @hw: pointer to the HW structure + * + * Initializes the LED config in SW. This is a function pointer entry point + * called by drivers. + **/ +s32 e1000_id_led_init(struct e1000_hw *hw) +{ + if (hw->mac.ops.id_led_init) + return hw->mac.ops.id_led_init(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_led_on - Turn on SW controllable LED + * @hw: pointer to the HW structure + * + * Turns the SW defined LED on. This is a function pointer entry point + * called by drivers. + **/ +s32 e1000_led_on(struct e1000_hw *hw) +{ + if (hw->mac.ops.led_on) + return hw->mac.ops.led_on(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_led_off - Turn off SW controllable LED + * @hw: pointer to the HW structure + * + * Turns the SW defined LED off. This is a function pointer entry point + * called by drivers. + **/ +s32 e1000_led_off(struct e1000_hw *hw) +{ + if (hw->mac.ops.led_off) + return hw->mac.ops.led_off(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_reset_adaptive - Reset adaptive IFS + * @hw: pointer to the HW structure + * + * Resets the adaptive IFS. Currently no func pointer exists and all + * implementations are handled in the generic version of this function. + **/ +void e1000_reset_adaptive(struct e1000_hw *hw) +{ + e1000_reset_adaptive_generic(hw); +} + +/** + * e1000_update_adaptive - Update adaptive IFS + * @hw: pointer to the HW structure + * + * Updates adapter IFS. Currently no func pointer exists and all + * implementations are handled in the generic version of this function. + **/ +void e1000_update_adaptive(struct e1000_hw *hw) +{ + e1000_update_adaptive_generic(hw); +} + +/** + * e1000_disable_pcie_master - Disable PCI-Express master access + * @hw: pointer to the HW structure + * + * Disables PCI-Express master access and verifies there are no pending + * requests. Currently no func pointer exists and all implementations are + * handled in the generic version of this function. + **/ +s32 e1000_disable_pcie_master(struct e1000_hw *hw) +{ + return e1000_disable_pcie_master_generic(hw); +} + +/** + * e1000_config_collision_dist - Configure collision distance + * @hw: pointer to the HW structure + * + * Configures the collision distance to the default value and is used + * during link setup. + **/ +void e1000_config_collision_dist(struct e1000_hw *hw) +{ + if (hw->mac.ops.config_collision_dist) + hw->mac.ops.config_collision_dist(hw); +} + +/** + * e1000_rar_set - Sets a receive address register + * @hw: pointer to the HW structure + * @addr: address to set the RAR to + * @index: the RAR to set + * + * Sets a Receive Address Register (RAR) to the specified address. + **/ +int e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) +{ + if (hw->mac.ops.rar_set) + return hw->mac.ops.rar_set(hw, addr, index); + + return E1000_SUCCESS; +} + +/** + * e1000_validate_mdi_setting - Ensures valid MDI/MDIX SW state + * @hw: pointer to the HW structure + * + * Ensures that the MDI/MDIX SW state is valid. + **/ +s32 e1000_validate_mdi_setting(struct e1000_hw *hw) +{ + if (hw->mac.ops.validate_mdi_setting) + return hw->mac.ops.validate_mdi_setting(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_hash_mc_addr - Determines address location in multicast table + * @hw: pointer to the HW structure + * @mc_addr: Multicast address to hash. + * + * This hashes an address to determine its location in the multicast + * table. Currently no func pointer exists and all implementations + * are handled in the generic version of this function. + **/ +u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) +{ + return e1000_hash_mc_addr_generic(hw, mc_addr); +} + +/** + * e1000_enable_tx_pkt_filtering - Enable packet filtering on TX + * @hw: pointer to the HW structure + * + * Enables packet filtering on transmit packets if manageability is enabled + * and host interface is enabled. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) +{ + return e1000_enable_tx_pkt_filtering_generic(hw); +} + +/** + * e1000_mng_host_if_write - Writes to the manageability host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface buffer + * @length: size of the buffer + * @offset: location in the buffer to write to + * @sum: sum of the data (not checksum) + * + * This function writes the buffer content at the offset given on the host if. + * It also does alignment considerations to do the writes in most efficient + * way. Also fills up the sum of the buffer in *buffer parameter. + **/ +s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, + u16 offset, u8 *sum) +{ + return e1000_mng_host_if_write_generic(hw, buffer, length, offset, sum); +} + +/** + * e1000_mng_write_cmd_header - Writes manageability command header + * @hw: pointer to the HW structure + * @hdr: pointer to the host interface command header + * + * Writes the command header after does the checksum calculation. + **/ +s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr) +{ + return e1000_mng_write_cmd_header_generic(hw, hdr); +} + +/** + * e1000_mng_enable_host_if - Checks host interface is enabled + * @hw: pointer to the HW structure + * + * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND + * + * This function checks whether the HOST IF is enabled for command operation + * and also checks whether the previous command is completed. It busy waits + * in case of previous command is not completed. + **/ +s32 e1000_mng_enable_host_if(struct e1000_hw *hw) +{ + return e1000_mng_enable_host_if_generic(hw); +} + +/** + * e1000_check_reset_block - Verifies PHY can be reset + * @hw: pointer to the HW structure + * + * Checks if the PHY is in a state that can be reset or if manageability + * has it tied up. This is a function pointer entry point called by drivers. + **/ +s32 e1000_check_reset_block(struct e1000_hw *hw) +{ + if (hw->phy.ops.check_reset_block) + return hw->phy.ops.check_reset_block(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_read_phy_reg - Reads PHY register + * @hw: pointer to the HW structure + * @offset: the register to read + * @data: the buffer to store the 16-bit read. + * + * Reads the PHY register and returns the value in data. + * This is a function pointer entry point called by drivers. + **/ +s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data) +{ + if (hw->phy.ops.read_reg) + return hw->phy.ops.read_reg(hw, offset, data); + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg - Writes PHY register + * @hw: pointer to the HW structure + * @offset: the register to write + * @data: the value to write. + * + * Writes the PHY register at offset with the value in data. + * This is a function pointer entry point called by drivers. + **/ +s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data) +{ + if (hw->phy.ops.write_reg) + return hw->phy.ops.write_reg(hw, offset, data); + + return E1000_SUCCESS; +} + +/** + * e1000_release_phy - Generic release PHY + * @hw: pointer to the HW structure + * + * Return if silicon family does not require a semaphore when accessing the + * PHY. + **/ +void e1000_release_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.release) + hw->phy.ops.release(hw); +} + +/** + * e1000_acquire_phy - Generic acquire PHY + * @hw: pointer to the HW structure + * + * Return success if silicon family does not require a semaphore when + * accessing the PHY. + **/ +s32 e1000_acquire_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.acquire) + return hw->phy.ops.acquire(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_read_kmrn_reg - Reads register using Kumeran interface + * @hw: pointer to the HW structure + * @offset: the register to read + * @data: the location to store the 16-bit value read. + * + * Reads a register out of the Kumeran interface. Currently no func pointer + * exists and all implementations are handled in the generic version of + * this function. + **/ +s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return e1000_read_kmrn_reg_generic(hw, offset, data); +} + +/** + * e1000_write_kmrn_reg - Writes register using Kumeran interface + * @hw: pointer to the HW structure + * @offset: the register to write + * @data: the value to write. + * + * Writes a register to the Kumeran interface. Currently no func pointer + * exists and all implementations are handled in the generic version of + * this function. + **/ +s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) +{ + return e1000_write_kmrn_reg_generic(hw, offset, data); +} + +/** + * e1000_get_cable_length - Retrieves cable length estimation + * @hw: pointer to the HW structure + * + * This function estimates the cable length and stores them in + * hw->phy.min_length and hw->phy.max_length. This is a function pointer + * entry point called by drivers. + **/ +s32 e1000_get_cable_length(struct e1000_hw *hw) +{ + if (hw->phy.ops.get_cable_length) + return hw->phy.ops.get_cable_length(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_get_phy_info - Retrieves PHY information from registers + * @hw: pointer to the HW structure + * + * This function gets some information from various PHY registers and + * populates hw->phy values with it. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_get_phy_info(struct e1000_hw *hw) +{ + if (hw->phy.ops.get_info) + return hw->phy.ops.get_info(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_phy_hw_reset - Hard PHY reset + * @hw: pointer to the HW structure + * + * Performs a hard PHY reset. This is a function pointer entry point called + * by drivers. + **/ +s32 e1000_phy_hw_reset(struct e1000_hw *hw) +{ + if (hw->phy.ops.reset) + return hw->phy.ops.reset(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_phy_commit - Soft PHY reset + * @hw: pointer to the HW structure + * + * Performs a soft PHY reset on those that apply. This is a function pointer + * entry point called by drivers. + **/ +s32 e1000_phy_commit(struct e1000_hw *hw) +{ + if (hw->phy.ops.commit) + return hw->phy.ops.commit(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_set_d0_lplu_state - Sets low power link up state for D0 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D0 + * and SmartSpeed is disabled when active is TRUE, else clear lplu for D0 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. This is a function pointer entry point called by drivers. + **/ +s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) +{ + if (hw->phy.ops.set_d0_lplu_state) + return hw->phy.ops.set_d0_lplu_state(hw, active); + + return E1000_SUCCESS; +} + +/** + * e1000_set_d3_lplu_state - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D3 + * and SmartSpeed is disabled when active is TRUE, else clear lplu for D3 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. This is a function pointer entry point called by drivers. + **/ +s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) +{ + if (hw->phy.ops.set_d3_lplu_state) + return hw->phy.ops.set_d3_lplu_state(hw, active); + + return E1000_SUCCESS; +} + +/** + * e1000_read_mac_addr - Reads MAC address + * @hw: pointer to the HW structure + * + * Reads the MAC address out of the adapter and stores it in the HW structure. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +s32 e1000_read_mac_addr(struct e1000_hw *hw) +{ + if (hw->mac.ops.read_mac_addr) + return hw->mac.ops.read_mac_addr(hw); + + return e1000_read_mac_addr_generic(hw); +} + +/** + * e1000_read_pba_string - Read device part number string + * @hw: pointer to the HW structure + * @pba_num: pointer to device part number + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number from the EEPROM and stores + * the value in pba_num. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size) +{ + return e1000_read_pba_string_generic(hw, pba_num, pba_num_size); +} + +/** + * e1000_read_pba_length - Read device part number string length + * @hw: pointer to the HW structure + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number length from the EEPROM and + * stores the value in pba_num. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size) +{ + return e1000_read_pba_length_generic(hw, pba_num_size); +} + +/** + * e1000_validate_nvm_checksum - Verifies NVM (EEPROM) checksum + * @hw: pointer to the HW structure + * + * Validates the NVM checksum is correct. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_validate_nvm_checksum(struct e1000_hw *hw) +{ + if (hw->nvm.ops.validate) + return hw->nvm.ops.validate(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_update_nvm_checksum - Updates NVM (EEPROM) checksum + * @hw: pointer to the HW structure + * + * Updates the NVM checksum. Currently no func pointer exists and all + * implementations are handled in the generic version of this function. + **/ +s32 e1000_update_nvm_checksum(struct e1000_hw *hw) +{ + if (hw->nvm.ops.update) + return hw->nvm.ops.update(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_reload_nvm - Reloads EEPROM + * @hw: pointer to the HW structure + * + * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the + * extended control register. + **/ +void e1000_reload_nvm(struct e1000_hw *hw) +{ + if (hw->nvm.ops.reload) + hw->nvm.ops.reload(hw); +} + +/** + * e1000_read_nvm - Reads NVM (EEPROM) + * @hw: pointer to the HW structure + * @offset: the word offset to read + * @words: number of 16-bit words to read + * @data: pointer to the properly sized buffer for the data. + * + * Reads 16-bit chunks of data from the NVM (EEPROM). This is a function + * pointer entry point called by drivers. + **/ +s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + if (hw->nvm.ops.read) + return hw->nvm.ops.read(hw, offset, words, data); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_write_nvm - Writes to NVM (EEPROM) + * @hw: pointer to the HW structure + * @offset: the word offset to read + * @words: number of 16-bit words to write + * @data: pointer to the properly sized buffer for the data. + * + * Writes 16-bit chunks of data to the NVM (EEPROM). This is a function + * pointer entry point called by drivers. + **/ +s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + if (hw->nvm.ops.write) + return hw->nvm.ops.write(hw, offset, words, data); + + return E1000_SUCCESS; +} + +/** + * e1000_write_8bit_ctrl_reg - Writes 8bit Control register + * @hw: pointer to the HW structure + * @reg: 32bit register offset + * @offset: the register to write + * @data: the value to write. + * + * Writes the PHY register at offset with the value in data. + * This is a function pointer entry point called by drivers. + **/ +s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, + u8 data) +{ + return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data); +} + +/** + * e1000_power_up_phy - Restores link in case of PHY power down + * @hw: pointer to the HW structure + * + * The phy may be powered down to save power, to turn off link when the + * driver is unloaded, or wake on lan is not enabled (among others). + **/ +void e1000_power_up_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.power_up) + hw->phy.ops.power_up(hw); + + e1000_setup_link(hw); +} + +/** + * e1000_power_down_phy - Power down PHY + * @hw: pointer to the HW structure + * + * The phy may be powered down to save power, to turn off link when the + * driver is unloaded, or wake on lan is not enabled (among others). + **/ +void e1000_power_down_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.power_down) + hw->phy.ops.power_down(hw); +} + +/** + * e1000_power_up_fiber_serdes_link - Power up serdes link + * @hw: pointer to the HW structure + * + * Power on the optics and PCS. + **/ +void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.power_up_serdes) + hw->mac.ops.power_up_serdes(hw); +} + +/** + * e1000_shutdown_fiber_serdes_link - Remove link during power down + * @hw: pointer to the HW structure + * + * Shutdown the optics and PCS on driver unload. + **/ +void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.shutdown_serdes) + hw->mac.ops.shutdown_serdes(hw); +} + Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_api.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_api.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_api.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_api.h (revision 291673) @@ -0,0 +1,158 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_API_H_ +#define _E1000_API_H_ + +#include "e1000_hw.h" + +extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); +extern void e1000_rx_fifo_flush_82575(struct e1000_hw *hw); +extern void e1000_init_function_pointers_vf(struct e1000_hw *hw); +extern void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw); +extern void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw); +extern void e1000_init_function_pointers_i210(struct e1000_hw *hw); + +s32 e1000_set_obff_timer(struct e1000_hw *hw, u32 itr); +s32 e1000_set_mac_type(struct e1000_hw *hw); +s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device); +s32 e1000_init_mac_params(struct e1000_hw *hw); +s32 e1000_init_nvm_params(struct e1000_hw *hw); +s32 e1000_init_phy_params(struct e1000_hw *hw); +s32 e1000_init_mbx_params(struct e1000_hw *hw); +s32 e1000_get_bus_info(struct e1000_hw *hw); +void e1000_clear_vfta(struct e1000_hw *hw); +void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value); +s32 e1000_force_mac_fc(struct e1000_hw *hw); +s32 e1000_check_for_link(struct e1000_hw *hw); +s32 e1000_reset_hw(struct e1000_hw *hw); +s32 e1000_init_hw(struct e1000_hw *hw); +s32 e1000_setup_link(struct e1000_hw *hw); +s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex); +s32 e1000_disable_pcie_master(struct e1000_hw *hw); +void e1000_config_collision_dist(struct e1000_hw *hw); +int e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); +u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); +void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count); +s32 e1000_setup_led(struct e1000_hw *hw); +s32 e1000_cleanup_led(struct e1000_hw *hw); +s32 e1000_check_reset_block(struct e1000_hw *hw); +s32 e1000_blink_led(struct e1000_hw *hw); +s32 e1000_led_on(struct e1000_hw *hw); +s32 e1000_led_off(struct e1000_hw *hw); +s32 e1000_id_led_init(struct e1000_hw *hw); +void e1000_reset_adaptive(struct e1000_hw *hw); +void e1000_update_adaptive(struct e1000_hw *hw); +s32 e1000_get_cable_length(struct e1000_hw *hw); +s32 e1000_validate_mdi_setting(struct e1000_hw *hw); +s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, + u8 data); +s32 e1000_get_phy_info(struct e1000_hw *hw); +void e1000_release_phy(struct e1000_hw *hw); +s32 e1000_acquire_phy(struct e1000_hw *hw); +s32 e1000_phy_hw_reset(struct e1000_hw *hw); +s32 e1000_phy_commit(struct e1000_hw *hw); +void e1000_power_up_phy(struct e1000_hw *hw); +void e1000_power_down_phy(struct e1000_hw *hw); +s32 e1000_read_mac_addr(struct e1000_hw *hw); +s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size); +s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size); +void e1000_reload_nvm(struct e1000_hw *hw); +s32 e1000_update_nvm_checksum(struct e1000_hw *hw); +s32 e1000_validate_nvm_checksum(struct e1000_hw *hw); +s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active); +s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); +bool e1000_check_mng_mode(struct e1000_hw *hw); +bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); +s32 e1000_mng_enable_host_if(struct e1000_hw *hw); +s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, + u16 offset, u8 *sum); +s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr); +s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length); + + + +/* + * TBI_ACCEPT macro definition: + * + * This macro requires: + * a = a pointer to struct e1000_hw + * status = the 8 bit status field of the Rx descriptor with EOP set + * errors = the 8 bit error field of the Rx descriptor with EOP set + * length = the sum of all the length fields of the Rx descriptors that + * make up the current frame + * last_byte = the last byte of the frame DMAed by the hardware + * min_frame_size = the minimum frame length we want to accept. + * max_frame_size = the maximum frame length we want to accept. + * + * This macro is a conditional that should be used in the interrupt + * handler's Rx processing routine when RxErrors have been detected. + * + * Typical use: + * ... + * if (TBI_ACCEPT) { + * accept_frame = TRUE; + * e1000_tbi_adjust_stats(adapter, MacAddress); + * frame_length--; + * } else { + * accept_frame = FALSE; + * } + * ... + */ + +/* The carrier extension symbol, as received by the NIC. */ +#define CARRIER_EXTENSION 0x0F + +#define TBI_ACCEPT(a, status, errors, length, last_byte, \ + min_frame_size, max_frame_size) \ + (e1000_tbi_sbp_enabled_82543(a) && \ + (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \ + ((last_byte) == CARRIER_EXTENSION) && \ + (((status) & E1000_RXD_STAT_VP) ? \ + (((length) > ((min_frame_size) - VLAN_TAG_SIZE)) && \ + ((length) <= ((max_frame_size) + 1))) : \ + (((length) > (min_frame_size)) && \ + ((length) <= ((max_frame_size) + VLAN_TAG_SIZE + 1))))) + +#define E1000_MAX(a, b) ((a) > (b) ? (a) : (b)) +#define E1000_DIVIDE_ROUND_UP(a, b) (((a) + (b) - 1) / (b)) /* ceil(a/b) */ +#endif /* _E1000_API_H_ */ Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_api.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_defines.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_defines.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_defines.h (revision 291673) @@ -0,0 +1,1431 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_DEFINES_H_ +#define _E1000_DEFINES_H_ + +/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ +#define REQ_TX_DESCRIPTOR_MULTIPLE 8 +#define REQ_RX_DESCRIPTOR_MULTIPLE 8 + +/* Definitions for power management and wakeup registers */ +/* Wake Up Control */ +#define E1000_WUC_APME 0x00000001 /* APM Enable */ +#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ +#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ +#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ +#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */ + +/* Wake Up Filter Control */ +#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ +#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ +#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ +#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ +#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ + +/* Wake Up Status */ +#define E1000_WUS_LNKC E1000_WUFC_LNKC +#define E1000_WUS_MAG E1000_WUFC_MAG +#define E1000_WUS_EX E1000_WUFC_EX +#define E1000_WUS_MC E1000_WUFC_MC +#define E1000_WUS_BC E1000_WUFC_BC + +/* Extended Device Control */ +#define E1000_CTRL_EXT_LPCD 0x00000004 /* LCD Power Cycle Done */ +#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* SW Definable Pin 4 data */ +#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* SW Definable Pin 6 data */ +#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* SW Definable Pin 3 data */ +#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ +#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* Direction of SDP3 0=in 1=out */ +#define E1000_CTRL_EXT_FORCE_SMBUS 0x00000800 /* Force SMBus mode */ +#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ +/* Physical Func Reset Done Indication */ +#define E1000_CTRL_EXT_PFRSTD 0x00004000 +#define E1000_CTRL_EXT_SDLPE 0X00040000 /* SerDes Low Power Enable */ +#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ +#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ +#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clk Gating */ +#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 +/* Offset of the link mode field in Ctrl Ext register */ +#define E1000_CTRL_EXT_LINK_MODE_OFFSET 22 +#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 +#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 +#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 +#define E1000_CTRL_EXT_EIAME 0x01000000 +#define E1000_CTRL_EXT_IRCA 0x00000001 +#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Drv loaded bit for FW */ +#define E1000_CTRL_EXT_IAME 0x08000000 /* Int ACK Auto-mask */ +#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ +#define E1000_CTRL_EXT_PHYPDEN 0x00100000 +#define E1000_I2CCMD_REG_ADDR_SHIFT 16 +#define E1000_I2CCMD_PHY_ADDR_SHIFT 24 +#define E1000_I2CCMD_OPCODE_READ 0x08000000 +#define E1000_I2CCMD_OPCODE_WRITE 0x00000000 +#define E1000_I2CCMD_READY 0x20000000 +#define E1000_I2CCMD_ERROR 0x80000000 +#define E1000_I2CCMD_SFP_DATA_ADDR(a) (0x0000 + (a)) +#define E1000_I2CCMD_SFP_DIAG_ADDR(a) (0x0100 + (a)) +#define E1000_MAX_SGMII_PHY_REG_ADDR 255 +#define E1000_I2CCMD_PHY_TIMEOUT 200 +#define E1000_IVAR_VALID 0x80 +#define E1000_GPIE_NSICR 0x00000001 +#define E1000_GPIE_MSIX_MODE 0x00000010 +#define E1000_GPIE_EIAME 0x40000000 +#define E1000_GPIE_PBA 0x80000000 + +/* Receive Descriptor bit definitions */ +#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ +#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ +#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ +#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ +#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ +#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ +#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ +#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ +#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ +#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ +#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ +#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ +#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ +#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ +#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ +#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ + +#define E1000_RXDEXT_STATERR_TST 0x00000100 /* Time Stamp taken */ +#define E1000_RXDEXT_STATERR_LB 0x00040000 +#define E1000_RXDEXT_STATERR_CE 0x01000000 +#define E1000_RXDEXT_STATERR_SE 0x02000000 +#define E1000_RXDEXT_STATERR_SEQ 0x04000000 +#define E1000_RXDEXT_STATERR_CXE 0x10000000 +#define E1000_RXDEXT_STATERR_TCPE 0x20000000 +#define E1000_RXDEXT_STATERR_IPE 0x40000000 +#define E1000_RXDEXT_STATERR_RXE 0x80000000 + +/* mask to determine if packets should be dropped due to frame errors */ +#define E1000_RXD_ERR_FRAME_ERR_MASK ( \ + E1000_RXD_ERR_CE | \ + E1000_RXD_ERR_SE | \ + E1000_RXD_ERR_SEQ | \ + E1000_RXD_ERR_CXE | \ + E1000_RXD_ERR_RXE) + +/* Same mask, but for extended and packet split descriptors */ +#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) + +#if !defined(EXTERNAL_RELEASE) || defined(E1000E_MQ) +#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001 +#endif /* !EXTERNAL_RELEASE || E1000E_MQ */ +#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 +#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 +#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 +#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 + +#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 + +/* Management Control */ +#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ +#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ +#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ +#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ +#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ +/* Enable MAC address filtering */ +#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 +/* Enable MNG packets to host memory */ +#define E1000_MANC_EN_MNG2HOST 0x00200000 + +#define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */ +#define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */ +#define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */ +#define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */ + +/* Receive Control */ +#define E1000_RCTL_RST 0x00000001 /* Software reset */ +#define E1000_RCTL_EN 0x00000002 /* enable */ +#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ +#define E1000_RCTL_UPE 0x00000008 /* unicast promisc enable */ +#define E1000_RCTL_MPE 0x00000010 /* multicast promisc enable */ +#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ +#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ +#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ +#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ +#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ +#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min thresh size */ +#define E1000_RCTL_RDMTS_HEX 0x00010000 +#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ +#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ +#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ +/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ +#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */ +#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */ +#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */ +#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */ +/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ +#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */ +#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */ +#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */ +#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ +#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ +#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ +#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ +#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ +#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ +#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ + +/* Use byte values for the following shift parameters + * Usage: + * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & + * E1000_PSRCTL_BSIZE0_MASK) | + * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & + * E1000_PSRCTL_BSIZE1_MASK) | + * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & + * E1000_PSRCTL_BSIZE2_MASK) | + * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; + * E1000_PSRCTL_BSIZE3_MASK)) + * where value0 = [128..16256], default=256 + * value1 = [1024..64512], default=4096 + * value2 = [0..64512], default=4096 + * value3 = [0..64512], default=0 + */ + +#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F +#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 +#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 +#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 + +#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ +#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ +#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ +#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ + +/* SWFW_SYNC Definitions */ +#define E1000_SWFW_EEP_SM 0x01 +#define E1000_SWFW_PHY0_SM 0x02 +#define E1000_SWFW_PHY1_SM 0x04 +#define E1000_SWFW_CSR_SM 0x08 +#define E1000_SWFW_PHY2_SM 0x20 +#define E1000_SWFW_PHY3_SM 0x40 +#define E1000_SWFW_SW_MNG_SM 0x400 + +/* Device Control */ +#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ +#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ +#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master reqs */ +#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ +#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ +#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ +#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ +#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ +#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ +#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ +#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ +#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ +#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ +#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ +#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ +#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */ +#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ +#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ +#define E1000_CTRL_RST 0x04000000 /* Global reset */ +#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ +#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ +#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ +#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ +#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */ + + +#define E1000_CONNSW_ENRGSRC 0x4 +#define E1000_CONNSW_PHYSD 0x400 +#define E1000_CONNSW_PHY_PDN 0x800 +#define E1000_CONNSW_SERDESD 0x200 +#define E1000_CONNSW_AUTOSENSE_CONF 0x2 +#define E1000_CONNSW_AUTOSENSE_EN 0x1 +#define E1000_PCS_CFG_PCS_EN 8 +#define E1000_PCS_LCTL_FLV_LINK_UP 1 +#define E1000_PCS_LCTL_FSV_10 0 +#define E1000_PCS_LCTL_FSV_100 2 +#define E1000_PCS_LCTL_FSV_1000 4 +#define E1000_PCS_LCTL_FDV_FULL 8 +#define E1000_PCS_LCTL_FSD 0x10 +#define E1000_PCS_LCTL_FORCE_LINK 0x20 +#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 +#define E1000_PCS_LCTL_AN_ENABLE 0x10000 +#define E1000_PCS_LCTL_AN_RESTART 0x20000 +#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000 +#define E1000_ENABLE_SERDES_LOOPBACK 0x0410 + +#define E1000_PCS_LSTS_LINK_OK 1 +#define E1000_PCS_LSTS_SPEED_100 2 +#define E1000_PCS_LSTS_SPEED_1000 4 +#define E1000_PCS_LSTS_DUPLEX_FULL 8 +#define E1000_PCS_LSTS_SYNK_OK 0x10 +#define E1000_PCS_LSTS_AN_COMPLETE 0x10000 + +/* Device Status */ +#define E1000_STATUS_FD 0x00000001 /* Duplex 0=half 1=full */ +#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ +#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ +#define E1000_STATUS_FUNC_SHIFT 2 +#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ +#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ +#define E1000_STATUS_SPEED_MASK 0x000000C0 +#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ +#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ +#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ +#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Compltn by NVM */ +#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */ +#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Master request status */ +#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ +#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ +#define E1000_STATUS_2P5_SKU 0x00001000 /* Val of 2.5GBE SKU strap */ +#define E1000_STATUS_2P5_SKU_OVER 0x00002000 /* Val of 2.5GBE SKU Over */ +#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */ +#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */ + +/* Constants used to interpret the masked PCI-X bus speed. */ +#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus spd 50-66MHz */ +#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus spd 66-100MHz */ +#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus spd 100-133MHz*/ + +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define SPEED_2500 2500 +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + + +#define ADVERTISE_10_HALF 0x0001 +#define ADVERTISE_10_FULL 0x0002 +#define ADVERTISE_100_HALF 0x0004 +#define ADVERTISE_100_FULL 0x0008 +#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */ +#define ADVERTISE_1000_FULL 0x0020 + +/* 1000/H is not supported, nor spec-compliant. */ +#define E1000_ALL_SPEED_DUPLEX ( \ + ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ + ADVERTISE_100_FULL | ADVERTISE_1000_FULL) +#define E1000_ALL_NOT_GIG ( \ + ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ + ADVERTISE_100_FULL) +#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) +#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) +#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) + +#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX + +/* LED Control */ +#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F +#define E1000_LEDCTL_LED0_MODE_SHIFT 0 +#define E1000_LEDCTL_LED0_IVRT 0x00000040 +#define E1000_LEDCTL_LED0_BLINK 0x00000080 + +#define E1000_LEDCTL_MODE_LED_ON 0xE +#define E1000_LEDCTL_MODE_LED_OFF 0xF + +/* Transmit Descriptor bit definitions */ +#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ +#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ +#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ +#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ +#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ +#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ +#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ +#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ +#define E1000_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */ +#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ +#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ +#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ +#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ +#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ +#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ +#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ +#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ +#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ +#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ +#define E1000_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */ + +/* Transmit Control */ +#define E1000_TCTL_EN 0x00000002 /* enable Tx */ +#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ +#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ +#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ +#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ +#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ + +/* Transmit Arbitration Count */ +#define E1000_TARC0_ENABLE 0x00000400 /* Enable Tx Queue 0 */ + +/* SerDes Control */ +#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 +#define E1000_SCTL_ENABLE_SERDES_LOOPBACK 0x0410 + +/* Receive Checksum Control */ +#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ +#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ +#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */ +#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ + +/* Header split receive */ +#define E1000_RFCTL_NFSW_DIS 0x00000040 +#define E1000_RFCTL_NFSR_DIS 0x00000080 +#define E1000_RFCTL_ACK_DIS 0x00001000 +#define E1000_RFCTL_EXTEN 0x00008000 +#define E1000_RFCTL_IPV6_EX_DIS 0x00010000 +#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 +#define E1000_RFCTL_LEF 0x00040000 + +/* Collision related configuration parameters */ +#define E1000_COLLISION_THRESHOLD 15 +#define E1000_CT_SHIFT 4 +#define E1000_COLLISION_DISTANCE 63 +#define E1000_COLD_SHIFT 12 + +/* Default values for the transmit IPG register */ +#define DEFAULT_82543_TIPG_IPGT_FIBER 9 +#define DEFAULT_82543_TIPG_IPGT_COPPER 8 + +#define E1000_TIPG_IPGT_MASK 0x000003FF + +#define DEFAULT_82543_TIPG_IPGR1 8 +#define E1000_TIPG_IPGR1_SHIFT 10 + +#define DEFAULT_82543_TIPG_IPGR2 6 +#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7 +#define E1000_TIPG_IPGR2_SHIFT 20 + +/* Ethertype field values */ +#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ + +#define ETHERNET_FCS_SIZE 4 +#define MAX_JUMBO_FRAME_SIZE 0x3F00 +#define E1000_TX_PTR_GAP 0x1F + +/* Extended Configuration Control and Size */ +#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 +#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008 +#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 +#define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080 +#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000 +#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16 + +#define E1000_PHY_CTRL_D0A_LPLU 0x00000002 +#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004 +#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008 +#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040 + +#define E1000_KABGTXD_BGSQLBIAS 0x00050000 + +/* PBA constants */ +#define E1000_PBA_8K 0x0008 /* 8KB */ +#define E1000_PBA_10K 0x000A /* 10KB */ +#define E1000_PBA_12K 0x000C /* 12KB */ +#define E1000_PBA_14K 0x000E /* 14KB */ +#define E1000_PBA_16K 0x0010 /* 16KB */ +#define E1000_PBA_18K 0x0012 +#define E1000_PBA_20K 0x0014 +#define E1000_PBA_22K 0x0016 +#define E1000_PBA_24K 0x0018 +#define E1000_PBA_26K 0x001A +#define E1000_PBA_30K 0x001E +#define E1000_PBA_32K 0x0020 +#define E1000_PBA_34K 0x0022 +#define E1000_PBA_35K 0x0023 +#define E1000_PBA_38K 0x0026 +#define E1000_PBA_40K 0x0028 +#define E1000_PBA_48K 0x0030 /* 48KB */ +#define E1000_PBA_64K 0x0040 /* 64KB */ + +#define E1000_PBA_RXA_MASK 0xFFFF + +#define E1000_PBS_16K E1000_PBA_16K + +/* Uncorrectable/correctable ECC Error counts and enable bits */ +#define E1000_PBECCSTS_CORR_ERR_CNT_MASK 0x000000FF +#define E1000_PBECCSTS_UNCORR_ERR_CNT_MASK 0x0000FF00 +#define E1000_PBECCSTS_UNCORR_ERR_CNT_SHIFT 8 +#define E1000_PBECCSTS_ECC_ENABLE 0x00010000 + +#define IFS_MAX 80 +#define IFS_MIN 40 +#define IFS_RATIO 4 +#define IFS_STEP 10 +#define MIN_NUM_XMITS 1000 + +/* SW Semaphore Register */ +#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ + +#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */ + +/* Interrupt Cause Read */ +#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ +#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ +#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ +#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ +#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ +#define E1000_ICR_RXO 0x00000040 /* Rx overrun */ +#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ +#define E1000_ICR_VMMB 0x00000100 /* VM MB event */ +#define E1000_ICR_RXCFG 0x00000400 /* Rx /c/ ordered set */ +#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ +#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ +#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ +#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ +#define E1000_ICR_TXD_LOW 0x00008000 +#define E1000_ICR_MNG 0x00040000 /* Manageability event */ +#define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */ +#define E1000_ICR_TS 0x00080000 /* Time Sync Interrupt */ +#define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */ +/* If this bit asserted, the driver should claim the interrupt */ +#define E1000_ICR_INT_ASSERTED 0x80000000 +#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */ +#define E1000_ICR_FER 0x00400000 /* Fatal Error */ + +#define E1000_ICR_THS 0x00800000 /* ICR.THS: Thermal Sensor Event*/ +#define E1000_ICR_MDDET 0x10000000 /* Malicious Driver Detect */ + + +/* Extended Interrupt Cause Read */ +#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */ +#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */ +#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */ +#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */ +#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */ +#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */ +#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */ +#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */ +#define E1000_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ +#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ +/* TCP Timer */ +#define E1000_TCPTIMER_KS 0x00000100 /* KickStart */ +#define E1000_TCPTIMER_COUNT_ENABLE 0x00000200 /* Count Enable */ +#define E1000_TCPTIMER_COUNT_FINISH 0x00000400 /* Count finish */ +#define E1000_TCPTIMER_LOOP 0x00000800 /* Loop */ + +/* This defines the bits that are set in the Interrupt Mask + * Set/Read Register. Each bit is documented below: + * o RXT0 = Receiver Timer Interrupt (ring 0) + * o TXDW = Transmit Descriptor Written Back + * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) + * o RXSEQ = Receive Sequence Error + * o LSC = Link Status Change + */ +#define IMS_ENABLE_MASK ( \ + E1000_IMS_RXT0 | \ + E1000_IMS_TXDW | \ + E1000_IMS_RXDMT0 | \ + E1000_IMS_RXSEQ | \ + E1000_IMS_LSC) + +/* Interrupt Mask Set */ +#define E1000_IMS_TXDW E1000_ICR_TXDW /* Tx desc written back */ +#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ +#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */ +#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ +#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ +#define E1000_IMS_RXO E1000_ICR_RXO /* Rx overrun */ +#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ +#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW +#define E1000_IMS_ECCER E1000_ICR_ECCER /* Uncorrectable ECC Error */ +#define E1000_IMS_TS E1000_ICR_TS /* Time Sync Interrupt */ +#define E1000_IMS_DRSTA E1000_ICR_DRSTA /* Device Reset Asserted */ +#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */ +#define E1000_IMS_FER E1000_ICR_FER /* Fatal Error */ + +#define E1000_IMS_THS E1000_ICR_THS /* ICR.TS: Thermal Sensor Event*/ +#define E1000_IMS_MDDET E1000_ICR_MDDET /* Malicious Driver Detect */ +/* Extended Interrupt Mask Set */ +#define E1000_EIMS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ +#define E1000_EIMS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ +#define E1000_EIMS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ +#define E1000_EIMS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ +#define E1000_EIMS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ +#define E1000_EIMS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ +#define E1000_EIMS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ +#define E1000_EIMS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ +#define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ +#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ + +/* Interrupt Cause Set */ +#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ +#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ + +/* Extended Interrupt Cause Set */ +#define E1000_EICS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ +#define E1000_EICS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ +#define E1000_EICS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ +#define E1000_EICS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ +#define E1000_EICS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ +#define E1000_EICS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ +#define E1000_EICS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ +#define E1000_EICS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ +#define E1000_EICS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ +#define E1000_EICS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ + +#define E1000_EITR_ITR_INT_MASK 0x0000FFFF +/* E1000_EITR_CNT_IGNR is only for 82576 and newer */ +#define E1000_EITR_CNT_IGNR 0x80000000 /* Don't reset counters on write */ +#define E1000_EITR_INTERVAL 0x00007FFC + +/* Transmit Descriptor Control */ +#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ +#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ +#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ +#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ +#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ +#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */ +/* Enable the counting of descriptors still to be processed. */ +#define E1000_TXDCTL_COUNT_DESC 0x00400000 + +/* Flow Control Constants */ +#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 +#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 +#define FLOW_CONTROL_TYPE 0x8808 + +/* 802.1q VLAN Packet Size */ +#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ +#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ + +/* Receive Address + * Number of high/low register pairs in the RAR. The RAR (Receive Address + * Registers) holds the directed and multicast addresses that we monitor. + * Technically, we have 16 spots. However, we reserve one of these spots + * (RAR[15]) for our directed address used by controllers with + * manageability enabled, allowing us room for 15 multicast addresses. + */ +#define E1000_RAR_ENTRIES 15 +#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ +#define E1000_RAL_MAC_ADDR_LEN 4 +#define E1000_RAH_MAC_ADDR_LEN 2 +#define E1000_RAH_QUEUE_MASK_82575 0x000C0000 +#define E1000_RAH_POOL_1 0x00040000 + +/* Error Codes */ +#define E1000_SUCCESS 0 +#define E1000_ERR_NVM 1 +#define E1000_ERR_PHY 2 +#define E1000_ERR_CONFIG 3 +#define E1000_ERR_PARAM 4 +#define E1000_ERR_MAC_INIT 5 +#define E1000_ERR_PHY_TYPE 6 +#define E1000_ERR_RESET 9 +#define E1000_ERR_MASTER_REQUESTS_PENDING 10 +#define E1000_ERR_HOST_INTERFACE_COMMAND 11 +#define E1000_BLK_PHY_RESET 12 +#define E1000_ERR_SWFW_SYNC 13 +#define E1000_NOT_IMPLEMENTED 14 +#define E1000_ERR_MBX 15 +#define E1000_ERR_INVALID_ARGUMENT 16 +#define E1000_ERR_NO_SPACE 17 +#define E1000_ERR_NVM_PBA_SECTION 18 +#define E1000_ERR_I2C 19 +#define E1000_ERR_INVM_VALUE_NOT_FOUND 20 + +/* Loop limit on how long we wait for auto-negotiation to complete */ +#define FIBER_LINK_UP_LIMIT 50 +#define COPPER_LINK_UP_LIMIT 10 +#define PHY_AUTO_NEG_LIMIT 45 +#define PHY_FORCE_LIMIT 20 +/* Number of 100 microseconds we wait for PCI Express master disable */ +#define MASTER_DISABLE_TIMEOUT 800 +/* Number of milliseconds we wait for PHY configuration done after MAC reset */ +#define PHY_CFG_TIMEOUT 100 +/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */ +#define MDIO_OWNERSHIP_TIMEOUT 10 +/* Number of milliseconds for NVM auto read done after MAC reset. */ +#define AUTO_READ_DONE_TIMEOUT 10 + +/* Flow Control */ +#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ +#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ +#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ + +/* Transmit Configuration Word */ +#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ +#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ +#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ +#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ +#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ + +/* Receive Configuration Word */ +#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ +#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ +#define E1000_RXCW_C 0x20000000 /* Receive config */ +#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ + +#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ +#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ + +#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ +#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ +#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00 +#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02 +#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 +#define E1000_TSYNCRXCTL_TYPE_ALL 0x08 +#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A +#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */ +#define E1000_TSYNCRXCTL_SYSCFI 0x00000020 /* Sys clock frequency */ + +#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF +#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00 +#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01 +#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE 0x02 +#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03 +#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04 + +#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK 0x00000F00 +#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE 0x0000 +#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE 0x0100 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE 0x0200 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE 0x0300 +#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE 0x0800 +#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE 0x0900 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00 +#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE 0x0B00 +#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE 0x0C00 +#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE 0x0D00 + +#define E1000_TIMINCA_16NS_SHIFT 24 +#define E1000_TIMINCA_INCPERIOD_SHIFT 24 +#define E1000_TIMINCA_INCVALUE_MASK 0x00FFFFFF + +#define E1000_TSICR_TXTS 0x00000002 +#define E1000_TSIM_TXTS 0x00000002 +/* TUPLE Filtering Configuration */ +#define E1000_TTQF_DISABLE_MASK 0xF0008000 /* TTQF Disable Mask */ +#define E1000_TTQF_QUEUE_ENABLE 0x100 /* TTQF Queue Enable Bit */ +#define E1000_TTQF_PROTOCOL_MASK 0xFF /* TTQF Protocol Mask */ +/* TTQF TCP Bit, shift with E1000_TTQF_PROTOCOL SHIFT */ +#define E1000_TTQF_PROTOCOL_TCP 0x0 +/* TTQF UDP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */ +#define E1000_TTQF_PROTOCOL_UDP 0x1 +/* TTQF SCTP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */ +#define E1000_TTQF_PROTOCOL_SCTP 0x2 +#define E1000_TTQF_PROTOCOL_SHIFT 5 /* TTQF Protocol Shift */ +#define E1000_TTQF_QUEUE_SHIFT 16 /* TTQF Queue Shfit */ +#define E1000_TTQF_RX_QUEUE_MASK 0x70000 /* TTQF Queue Mask */ +#define E1000_TTQF_MASK_ENABLE 0x10000000 /* TTQF Mask Enable Bit */ +#define E1000_IMIR_CLEAR_MASK 0xF001FFFF /* IMIR Reg Clear Mask */ +#define E1000_IMIR_PORT_BYPASS 0x20000 /* IMIR Port Bypass Bit */ +#define E1000_IMIR_PRIORITY_SHIFT 29 /* IMIR Priority Shift */ +#define E1000_IMIREXT_CLEAR_MASK 0x7FFFF /* IMIREXT Reg Clear Mask */ + +#define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */ +#define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */ +#define E1000_MDICNFG_PHY_MASK 0x03E00000 +#define E1000_MDICNFG_PHY_SHIFT 21 + +#define E1000_MEDIA_PORT_COPPER 1 +#define E1000_MEDIA_PORT_OTHER 2 +#define E1000_M88E1112_AUTO_COPPER_SGMII 0x2 +#define E1000_M88E1112_AUTO_COPPER_BASEX 0x3 +#define E1000_M88E1112_STATUS_LINK 0x0004 /* Interface Link Bit */ +#define E1000_M88E1112_MAC_CTRL_1 0x10 +#define E1000_M88E1112_MAC_CTRL_1_MODE_MASK 0x0380 /* Mode Select */ +#define E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT 7 +#define E1000_M88E1112_PAGE_ADDR 0x16 +#define E1000_M88E1112_STATUS 0x01 + +#define E1000_THSTAT_LOW_EVENT 0x20000000 /* Low thermal threshold */ +#define E1000_THSTAT_MID_EVENT 0x00200000 /* Mid thermal threshold */ +#define E1000_THSTAT_HIGH_EVENT 0x00002000 /* High thermal threshold */ +#define E1000_THSTAT_PWR_DOWN 0x00000001 /* Power Down Event */ +#define E1000_THSTAT_LINK_THROTTLE 0x00000002 /* Link Spd Throttle Event */ + +/* I350 EEE defines */ +#define E1000_IPCNFG_EEE_1G_AN 0x00000008 /* IPCNFG EEE Ena 1G AN */ +#define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* IPCNFG EEE Ena 100M AN */ +#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEER Tx LPI Enable */ +#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEER Rx LPI Enable */ +#define E1000_EEER_LPI_FC 0x00040000 /* EEER Ena on Flow Cntrl */ +/* EEE status */ +#define E1000_EEER_EEE_NEG 0x20000000 /* EEE capability nego */ +#define E1000_EEER_RX_LPI_STATUS 0x40000000 /* Rx in LPI state */ +#define E1000_EEER_TX_LPI_STATUS 0x80000000 /* Tx in LPI state */ +#define E1000_EEE_LP_ADV_ADDR_I350 0x040F /* EEE LP Advertisement */ +#define E1000_M88E1543_PAGE_ADDR 0x16 /* Page Offset Register */ +#define E1000_M88E1543_EEE_CTRL_1 0x0 +#define E1000_M88E1543_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */ +#define E1000_EEE_ADV_DEV_I354 7 +#define E1000_EEE_ADV_ADDR_I354 60 +#define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */ +#define E1000_EEE_ADV_1000_SUPPORTED (1 << 2) /* 1000BaseT EEE Supported */ +#define E1000_PCS_STATUS_DEV_I354 3 +#define E1000_PCS_STATUS_ADDR_I354 1 +#define E1000_PCS_STATUS_RX_LPI_RCVD 0x0400 +#define E1000_PCS_STATUS_TX_LPI_RCVD 0x0800 +#define E1000_M88E1512_CFG_REG_1 0x0010 +#define E1000_M88E1512_CFG_REG_2 0x0011 +#define E1000_M88E1512_CFG_REG_3 0x0007 +#define E1000_M88E1512_MODE 0x0014 +#define E1000_EEE_SU_LPI_CLK_STP 0x00800000 /* EEE LPI Clock Stop */ +#define E1000_EEE_LP_ADV_DEV_I210 7 /* EEE LP Adv Device */ +#define E1000_EEE_LP_ADV_ADDR_I210 61 /* EEE LP Adv Register */ +/* PCI Express Control */ +#define E1000_GCR_RXD_NO_SNOOP 0x00000001 +#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002 +#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004 +#define E1000_GCR_TXD_NO_SNOOP 0x00000008 +#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010 +#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020 +#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000 +#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000 +#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000 +#define E1000_GCR_CAP_VER2 0x00040000 + +#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \ + E1000_GCR_RXDSCW_NO_SNOOP | \ + E1000_GCR_RXDSCR_NO_SNOOP | \ + E1000_GCR_TXD_NO_SNOOP | \ + E1000_GCR_TXDSCW_NO_SNOOP | \ + E1000_GCR_TXDSCR_NO_SNOOP) + +#define E1000_MMDAC_FUNC_DATA 0x4000 /* Data, no post increment */ + +/* mPHY address control and data registers */ +#define E1000_MPHY_ADDR_CTL 0x0024 /* Address Control Reg */ +#define E1000_MPHY_ADDR_CTL_OFFSET_MASK 0xFFFF0000 +#define E1000_MPHY_DATA 0x0E10 /* Data Register */ + +/* AFE CSR Offset for PCS CLK */ +#define E1000_MPHY_PCS_CLK_REG_OFFSET 0x0004 +/* Override for near end digital loopback. */ +#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10 + +/* PHY Control Register */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_1000 0x0040 +#define MII_CR_SPEED_100 0x2000 +#define MII_CR_SPEED_10 0x0000 + +/* PHY Status Register */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +/* Autoneg Advertisement Register */ +#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ +#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Link Partner Ability Register (Base Page) */ +#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ +#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP 10T Half Dplx Capable */ +#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP 10T Full Dplx Capable */ +#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP 100TX Half Dplx Capable */ +#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP 100TX Full Dplx Capable */ +#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ +#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ +#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asym Pause Direction bit */ +#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP detected Remote Fault */ +#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP rx'd link code word */ +#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Autoneg Expansion Register */ +#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ +#define NWAY_ER_PAGE_RXD 0x0002 /* LP 10T Half Dplx Capable */ +#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP 10T Full Dplx Capable */ +#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP 100TX Half Dplx Capable */ +#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP 100TX Full Dplx Capable */ + +/* 1000BASE-T Control Register */ +#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ +#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +/* 1=Repeater/switch device port 0=DTE device */ +#define CR_1000T_REPEATER_DTE 0x0400 +/* 1=Configure PHY as Master 0=Configure PHY as Slave */ +#define CR_1000T_MS_VALUE 0x0800 +/* 1=Master/Slave manual config value 0=Automatic Master/Slave config */ +#define CR_1000T_MS_ENABLE 0x1000 +#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ + +/* 1000BASE-T Status Register */ +#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle err since last rd */ +#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asym pause direction bit */ +#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local Tx Master, 0=Slave */ +#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ + +#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 + +/* PHY 1000 MII Register/Bit Definitions */ +/* PHY Registers defined by IEEE */ +#define PHY_CONTROL 0x00 /* Control Register */ +#define PHY_STATUS 0x01 /* Status Register */ +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ +#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX 0x07 /* Next Page Tx */ +#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ +#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ + +#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */ + +/* NVM Control */ +#define E1000_EECD_SK 0x00000001 /* NVM Clock */ +#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ +#define E1000_EECD_DI 0x00000004 /* NVM Data In */ +#define E1000_EECD_DO 0x00000008 /* NVM Data Out */ +#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */ +#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */ +#define E1000_EECD_PRES 0x00000100 /* NVM Present */ +#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */ +#define E1000_EECD_BLOCKED 0x00008000 /* Bit banging access blocked flag */ +#define E1000_EECD_ABORT 0x00010000 /* NVM operation aborted flag */ +#define E1000_EECD_TIMEOUT 0x00020000 /* NVM read operation timeout flag */ +#define E1000_EECD_ERROR_CLR 0x00040000 /* NVM error status clear bit */ +/* NVM Addressing bits based on type 0=small, 1=large */ +#define E1000_EECD_ADDR_BITS 0x00000400 +#ifndef E1000_NVM_GRANT_ATTEMPTS +#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */ +#endif +#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ +#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ +#define E1000_EECD_SIZE_EX_SHIFT 11 +#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ +#define E1000_EECD_AUPDEN 0x00100000 /* Ena Auto FLASH update */ +#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES) +#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */ +#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done */ +#define E1000_EECD_FLASH_DETECTED_I210 0x00080000 /* FLASH detected */ +#define E1000_EECD_SEC1VAL_I210 0x02000000 /* Sector One Valid */ +#define E1000_FLUDONE_ATTEMPTS 20000 +#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */ +#define E1000_I210_FIFO_SEL_RX 0x00 +#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i)) +#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0) +#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06 +#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01 + +#define E1000_I210_FLASH_SECTOR_SIZE 0x1000 /* 4KB FLASH sector unit size */ +/* Secure FLASH mode requires removing MSb */ +#define E1000_I210_FW_PTR_MASK 0x7FFF +/* Firmware code revision field word offset*/ +#define E1000_I210_FW_VER_OFFSET 328 + +#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write regs */ +#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ +#define E1000_NVM_RW_REG_START 1 /* Start operation */ +#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */ +#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */ +#define E1000_FLASH_UPDATES 2000 + +/* NVM Word Offsets */ +#define NVM_COMPAT 0x0003 +#define NVM_ID_LED_SETTINGS 0x0004 +#define NVM_VERSION 0x0005 +#define E1000_I210_NVM_FW_MODULE_PTR 0x0010 +#define E1000_I350_NVM_FW_MODULE_PTR 0x0051 +#define NVM_FUTURE_INIT_WORD1 0x0019 +#define NVM_ETRACK_WORD 0x0042 +#define NVM_ETRACK_HIWORD 0x0043 +#define NVM_COMB_VER_OFF 0x0083 +#define NVM_COMB_VER_PTR 0x003d + +/* NVM version defines */ +#define NVM_MAJOR_MASK 0xF000 +#define NVM_MINOR_MASK 0x0FF0 +#define NVM_IMAGE_ID_MASK 0x000F +#define NVM_COMB_VER_MASK 0x00FF +#define NVM_MAJOR_SHIFT 12 +#define NVM_MINOR_SHIFT 4 +#define NVM_COMB_VER_SHFT 8 +#define NVM_VER_INVALID 0xFFFF +#define NVM_ETRACK_SHIFT 16 +#define NVM_ETRACK_VALID 0x8000 +#define NVM_NEW_DEC_MASK 0x0F00 +#define NVM_HEX_CONV 16 +#define NVM_HEX_TENS 10 + +/* FW version defines */ +/* Offset of "Loader patch ptr" in Firmware Header */ +#define E1000_I350_NVM_FW_LOADER_PATCH_PTR_OFFSET 0x01 +/* Patch generation hour & minutes */ +#define E1000_I350_NVM_FW_VER_WORD1_OFFSET 0x04 +/* Patch generation month & day */ +#define E1000_I350_NVM_FW_VER_WORD2_OFFSET 0x05 +/* Patch generation year */ +#define E1000_I350_NVM_FW_VER_WORD3_OFFSET 0x06 +/* Patch major & minor numbers */ +#define E1000_I350_NVM_FW_VER_WORD4_OFFSET 0x07 + +#define NVM_MAC_ADDR 0x0000 +#define NVM_SUB_DEV_ID 0x000B +#define NVM_SUB_VEN_ID 0x000C +#define NVM_DEV_ID 0x000D +#define NVM_VEN_ID 0x000E +#define NVM_INIT_CTRL_2 0x000F +#define NVM_INIT_CTRL_4 0x0013 +#define NVM_LED_1_CFG 0x001C +#define NVM_LED_0_2_CFG 0x001F + +#define NVM_COMPAT_VALID_CSUM 0x0001 +#define NVM_FUTURE_INIT_WORD1_VALID_CSUM 0x0040 + +#define NVM_INIT_CONTROL2_REG 0x000F +#define NVM_INIT_CONTROL3_PORT_B 0x0014 +#define NVM_INIT_3GIO_3 0x001A +#define NVM_SWDEF_PINS_CTRL_PORT_0 0x0020 +#define NVM_INIT_CONTROL3_PORT_A 0x0024 +#define NVM_CFG 0x0012 +#define NVM_ALT_MAC_ADDR_PTR 0x0037 +#define NVM_CHECKSUM_REG 0x003F +#define NVM_COMPATIBILITY_REG_3 0x0003 +#define NVM_COMPATIBILITY_BIT_MASK 0x8000 + +#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */ +#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */ +#define E1000_NVM_CFG_DONE_PORT_2 0x100000 /* ...for third port */ +#define E1000_NVM_CFG_DONE_PORT_3 0x200000 /* ...for fourth port */ + +#define NVM_82580_LAN_FUNC_OFFSET(a) ((a) ? (0x40 + (0x40 * (a))) : 0) + +/* Mask bits for fields in Word 0x24 of the NVM */ +#define NVM_WORD24_COM_MDIO 0x0008 /* MDIO interface shared */ +#define NVM_WORD24_EXT_MDIO 0x0004 /* MDIO accesses routed extrnl */ +/* Offset of Link Mode bits for 82575/82576 */ +#define NVM_WORD24_LNK_MODE_OFFSET 8 +/* Offset of Link Mode bits for 82580 up */ +#define NVM_WORD24_82580_LNK_MODE_OFFSET 4 + + +/* Mask bits for fields in Word 0x0f of the NVM */ +#define NVM_WORD0F_PAUSE_MASK 0x3000 +#define NVM_WORD0F_PAUSE 0x1000 +#define NVM_WORD0F_ASM_DIR 0x2000 + +/* Mask bits for fields in Word 0x1a of the NVM */ +#define NVM_WORD1A_ASPM_MASK 0x000C + +/* Mask bits for fields in Word 0x03 of the EEPROM */ +#define NVM_COMPAT_LOM 0x0800 + +/* length of string needed to store PBA number */ +#define E1000_PBANUM_LENGTH 11 + +/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */ +#define NVM_SUM 0xBABA + +/* PBA (printed board assembly) number words */ +#define NVM_PBA_OFFSET_0 8 +#define NVM_PBA_OFFSET_1 9 +#define NVM_PBA_PTR_GUARD 0xFAFA +#define NVM_RESERVED_WORD 0xFFFF +#define NVM_WORD_SIZE_BASE_SHIFT 6 + +/* NVM Commands - Microwire */ +#define NVM_READ_OPCODE_MICROWIRE 0x6 /* NVM read opcode */ +#define NVM_WRITE_OPCODE_MICROWIRE 0x5 /* NVM write opcode */ +#define NVM_ERASE_OPCODE_MICROWIRE 0x7 /* NVM erase opcode */ +#define NVM_EWEN_OPCODE_MICROWIRE 0x13 /* NVM erase/write enable */ +#define NVM_EWDS_OPCODE_MICROWIRE 0x10 /* NVM erase/write disable */ + +/* NVM Commands - SPI */ +#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ +#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */ +#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */ +#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ +#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */ +#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */ + +/* SPI NVM Status Register */ +#define NVM_STATUS_RDY_SPI 0x01 + +/* Word definitions for ID LED Settings */ +#define ID_LED_RESERVED_0000 0x0000 +#define ID_LED_RESERVED_FFFF 0xFFFF +#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ + (ID_LED_OFF1_OFF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_DEF1_DEF2)) +#define ID_LED_DEF1_DEF2 0x1 +#define ID_LED_DEF1_ON2 0x2 +#define ID_LED_DEF1_OFF2 0x3 +#define ID_LED_ON1_DEF2 0x4 +#define ID_LED_ON1_ON2 0x5 +#define ID_LED_ON1_OFF2 0x6 +#define ID_LED_OFF1_DEF2 0x7 +#define ID_LED_OFF1_ON2 0x8 +#define ID_LED_OFF1_OFF2 0x9 + +#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF +#define IGP_ACTIVITY_LED_ENABLE 0x0300 +#define IGP_LED3_MODE 0x07000000 + +/* PCI/PCI-X/PCI-EX Config space */ +#define PCIX_COMMAND_REGISTER 0xE6 +#define PCIX_STATUS_REGISTER_LO 0xE8 +#define PCIX_STATUS_REGISTER_HI 0xEA +#define PCI_HEADER_TYPE_REGISTER 0x0E +#define PCIE_LINK_STATUS 0x12 +#define PCIE_DEVICE_CONTROL2 0x28 + +#define PCIX_COMMAND_MMRBC_MASK 0x000C +#define PCIX_COMMAND_MMRBC_SHIFT 0x2 +#define PCIX_STATUS_HI_MMRBC_MASK 0x0060 +#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5 +#define PCIX_STATUS_HI_MMRBC_4K 0x3 +#define PCIX_STATUS_HI_MMRBC_2K 0x2 +#define PCIX_STATUS_LO_FUNC_MASK 0x7 +#define PCI_HEADER_TYPE_MULTIFUNC 0x80 +#define PCIE_LINK_WIDTH_MASK 0x3F0 +#define PCIE_LINK_WIDTH_SHIFT 4 +#define PCIE_LINK_SPEED_MASK 0x0F +#define PCIE_LINK_SPEED_2500 0x01 +#define PCIE_LINK_SPEED_5000 0x02 +#define PCIE_DEVICE_CONTROL2_16ms 0x0005 + +#ifndef ETH_ADDR_LEN +#define ETH_ADDR_LEN 6 +#endif + +#define PHY_REVISION_MASK 0xFFFFFFF0 +#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ +#define MAX_PHY_MULTI_PAGE_REG 0xF + +/* Bit definitions for valid PHY IDs. + * I = Integrated + * E = External + */ +#define M88E1000_E_PHY_ID 0x01410C50 +#define M88E1000_I_PHY_ID 0x01410C30 +#define M88E1011_I_PHY_ID 0x01410C20 +#define IGP01E1000_I_PHY_ID 0x02A80380 +#define M88E1111_I_PHY_ID 0x01410CC0 +#define M88E1543_E_PHY_ID 0x01410EA0 +#define M88E1512_E_PHY_ID 0x01410DD0 +#define M88E1112_E_PHY_ID 0x01410C90 +#define I347AT4_E_PHY_ID 0x01410DC0 +#define M88E1340M_E_PHY_ID 0x01410DF0 +#define GG82563_E_PHY_ID 0x01410CA0 +#define IGP03E1000_E_PHY_ID 0x02A80390 +#define IFE_E_PHY_ID 0x02A80330 +#define IFE_PLUS_E_PHY_ID 0x02A80320 +#define IFE_C_E_PHY_ID 0x02A80310 +#define I82580_I_PHY_ID 0x015403A0 +#define I350_I_PHY_ID 0x015403B0 +#define I210_I_PHY_ID 0x01410C00 +#define IGP04E1000_E_PHY_ID 0x02A80391 +#define M88_VENDOR 0x0141 + +/* M88E1000 Specific Registers */ +#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Reg */ +#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Reg */ +#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Cntrl */ +#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ + +#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for pg number setting */ +#define M88E1000_PHY_GEN_CONTROL 0x1E /* meaning depends on reg 29 */ + +/* M88E1000 PHY Specific Control Register */ +#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reverse enabled */ +/* MDI Crossover Mode bits 6:5 Manual MDI configuration */ +#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 +#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ +/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ +#define M88E1000_PSCR_AUTO_X_1000T 0x0040 +/* Auto crossover enabled all speeds */ +#define M88E1000_PSCR_AUTO_X_MODE 0x0060 +#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Tx */ + +/* M88E1000 PHY Specific Status Register */ +#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ +#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ +#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ +/* 0 = <50M + * 1 = 50-80M + * 2 = 80-110M + * 3 = 110-140M + * 4 = >140M + */ +#define M88E1000_PSSR_CABLE_LENGTH 0x0380 +#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ +#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ + +#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 + +/* Number of times we will attempt to autonegotiate before downshifting if we + * are the master + */ +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 +/* Number of times we will attempt to autonegotiate before downshifting if we + * are the slave + */ +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 +#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ + +/* Intel I347AT4 Registers */ +#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */ +#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */ +#define I347AT4_PAGE_SELECT 0x16 + +/* I347AT4 Extended PHY Specific Control Register */ + +/* Number of times we will attempt to autonegotiate before downshifting if we + * are the master + */ +#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800 +#define I347AT4_PSCR_DOWNSHIFT_MASK 0x7000 +#define I347AT4_PSCR_DOWNSHIFT_1X 0x0000 +#define I347AT4_PSCR_DOWNSHIFT_2X 0x1000 +#define I347AT4_PSCR_DOWNSHIFT_3X 0x2000 +#define I347AT4_PSCR_DOWNSHIFT_4X 0x3000 +#define I347AT4_PSCR_DOWNSHIFT_5X 0x4000 +#define I347AT4_PSCR_DOWNSHIFT_6X 0x5000 +#define I347AT4_PSCR_DOWNSHIFT_7X 0x6000 +#define I347AT4_PSCR_DOWNSHIFT_8X 0x7000 + +/* I347AT4 PHY Cable Diagnostics Control */ +#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */ + +/* M88E1112 only registers */ +#define M88E1112_VCT_DSP_DISTANCE 0x001A + +/* M88EC018 Rev 2 specific DownShift settings */ +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 + +/* Bits... + * 15-5: page + * 4-0: register offset + */ +#define GG82563_PAGE_SHIFT 5 +#define GG82563_REG(page, reg) \ + (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) +#define GG82563_MIN_ALT_REG 30 + +/* GG82563 Specific Registers */ +#define GG82563_PHY_SPEC_CTRL GG82563_REG(0, 16) /* PHY Spec Cntrl */ +#define GG82563_PHY_PAGE_SELECT GG82563_REG(0, 22) /* Page Select */ +#define GG82563_PHY_SPEC_CTRL_2 GG82563_REG(0, 26) /* PHY Spec Cntrl2 */ +#define GG82563_PHY_PAGE_SELECT_ALT GG82563_REG(0, 29) /* Alt Page Select */ + +/* MAC Specific Control Register */ +#define GG82563_PHY_MAC_SPEC_CTRL GG82563_REG(2, 21) + +#define GG82563_PHY_DSP_DISTANCE GG82563_REG(5, 26) /* DSP Distance */ + +/* Page 193 - Port Control Registers */ +/* Kumeran Mode Control */ +#define GG82563_PHY_KMRN_MODE_CTRL GG82563_REG(193, 16) +#define GG82563_PHY_PWR_MGMT_CTRL GG82563_REG(193, 20) /* Pwr Mgt Ctrl */ + +/* Page 194 - KMRN Registers */ +#define GG82563_PHY_INBAND_CTRL GG82563_REG(194, 18) /* Inband Ctrl */ + +/* MDI Control */ +#define E1000_MDIC_REG_MASK 0x001F0000 +#define E1000_MDIC_REG_SHIFT 16 +#define E1000_MDIC_PHY_MASK 0x03E00000 +#define E1000_MDIC_PHY_SHIFT 21 +#define E1000_MDIC_OP_WRITE 0x04000000 +#define E1000_MDIC_OP_READ 0x08000000 +#define E1000_MDIC_READY 0x10000000 +#define E1000_MDIC_ERROR 0x40000000 +#define E1000_MDIC_DEST 0x80000000 + +/* SerDes Control */ +#define E1000_GEN_CTL_READY 0x80000000 +#define E1000_GEN_CTL_ADDRESS_SHIFT 8 +#define E1000_GEN_POLL_TIMEOUT 640 + +/* LinkSec register fields */ +#define E1000_LSECTXCAP_SUM_MASK 0x00FF0000 +#define E1000_LSECTXCAP_SUM_SHIFT 16 +#define E1000_LSECRXCAP_SUM_MASK 0x00FF0000 +#define E1000_LSECRXCAP_SUM_SHIFT 16 + +#define E1000_LSECTXCTRL_EN_MASK 0x00000003 +#define E1000_LSECTXCTRL_DISABLE 0x0 +#define E1000_LSECTXCTRL_AUTH 0x1 +#define E1000_LSECTXCTRL_AUTH_ENCRYPT 0x2 +#define E1000_LSECTXCTRL_AISCI 0x00000020 +#define E1000_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00 +#define E1000_LSECTXCTRL_RSV_MASK 0x000000D8 + +#define E1000_LSECRXCTRL_EN_MASK 0x0000000C +#define E1000_LSECRXCTRL_EN_SHIFT 2 +#define E1000_LSECRXCTRL_DISABLE 0x0 +#define E1000_LSECRXCTRL_CHECK 0x1 +#define E1000_LSECRXCTRL_STRICT 0x2 +#define E1000_LSECRXCTRL_DROP 0x3 +#define E1000_LSECRXCTRL_PLSH 0x00000040 +#define E1000_LSECRXCTRL_RP 0x00000080 +#define E1000_LSECRXCTRL_RSV_MASK 0xFFFFFF33 + +/* Tx Rate-Scheduler Config fields */ +#define E1000_RTTBCNRC_RS_ENA 0x80000000 +#define E1000_RTTBCNRC_RF_DEC_MASK 0x00003FFF +#define E1000_RTTBCNRC_RF_INT_SHIFT 14 +#define E1000_RTTBCNRC_RF_INT_MASK \ + (E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT) + +/* DMA Coalescing register fields */ +/* DMA Coalescing Watchdog Timer */ +#define E1000_DMACR_DMACWT_MASK 0x00003FFF +/* DMA Coalescing Rx Threshold */ +#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 +#define E1000_DMACR_DMACTHR_SHIFT 16 +/* Lx when no PCIe transactions */ +#define E1000_DMACR_DMAC_LX_MASK 0x30000000 +#define E1000_DMACR_DMAC_LX_SHIFT 28 +#define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */ +/* DMA Coalescing BMC-to-OS Watchdog Enable */ +#define E1000_DMACR_DC_BMC2OSW_EN 0x00008000 + +/* DMA Coalescing Transmit Threshold */ +#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF + +#define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */ + +/* Rx Traffic Rate Threshold */ +#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF +/* Rx packet rate in current window */ +#define E1000_DMCRTRH_LRPRCW 0x80000000 + +/* DMA Coal Rx Traffic Current Count */ +#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF + +/* Flow ctrl Rx Threshold High val */ +#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 +#define E1000_FCRTC_RTH_COAL_SHIFT 4 +/* Lx power decision based on DMA coal */ +#define E1000_PCIEMISC_LX_DECISION 0x00000080 + +#define E1000_RXPBS_CFG_TS_EN 0x80000000 /* Timestamp in Rx buffer */ +#define E1000_RXPBS_SIZE_I210_MASK 0x0000003F /* Rx packet buffer size */ +#define E1000_TXPB0S_SIZE_I210_MASK 0x0000003F /* Tx packet buffer 0 size */ +#define I210_RXPBSIZE_DEFAULT 0x000000A2 /* RXPBSIZE default */ +#define I210_TXPBSIZE_DEFAULT 0x04000014 /* TXPBSIZE default */ + + +/* Proxy Filter Control */ +#define E1000_PROXYFC_D0 0x00000001 /* Enable offload in D0 */ +#define E1000_PROXYFC_EX 0x00000004 /* Directed exact proxy */ +#define E1000_PROXYFC_MC 0x00000008 /* Directed MC Proxy */ +#define E1000_PROXYFC_BC 0x00000010 /* Broadcast Proxy Enable */ +#define E1000_PROXYFC_ARP_DIRECTED 0x00000020 /* Directed ARP Proxy Ena */ +#define E1000_PROXYFC_IPV4 0x00000040 /* Directed IPv4 Enable */ +#define E1000_PROXYFC_IPV6 0x00000080 /* Directed IPv6 Enable */ +#define E1000_PROXYFC_NS 0x00000200 /* IPv6 Neighbor Solicitation */ +#define E1000_PROXYFC_ARP 0x00000800 /* ARP Request Proxy Ena */ +/* Proxy Status */ +#define E1000_PROXYS_CLEAR 0xFFFFFFFF /* Clear */ + +/* Firmware Status */ +#define E1000_FWSTS_FWRI 0x80000000 /* FW Reset Indication */ +/* VF Control */ +#define E1000_VTCTRL_RST 0x04000000 /* Reset VF */ + +#define E1000_STATUS_LAN_ID_MASK 0x00000000C /* Mask for Lan ID field */ +/* Lan ID bit field offset in status register */ +#define E1000_STATUS_LAN_ID_OFFSET 2 +#define E1000_VFTA_ENTRIES 128 +#ifndef E1000_UNUSEDARG +#define E1000_UNUSEDARG +#endif /* E1000_UNUSEDARG */ +#ifndef ERROR_REPORT +#define ERROR_REPORT(fmt) do { } while (0) +#endif /* ERROR_REPORT */ +#endif /* _E1000_DEFINES_H_ */ Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_defines.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_hw.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_hw.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_hw.h (revision 291673) @@ -0,0 +1,819 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_HW_H_ +#define _E1000_HW_H_ + +#include "e1000_osdep.h" +#include "e1000_regs.h" +#include "e1000_defines.h" + +struct e1000_hw; + +#define E1000_DEV_ID_82576 0x10C9 +#define E1000_DEV_ID_82576_FIBER 0x10E6 +#define E1000_DEV_ID_82576_SERDES 0x10E7 +#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 +#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526 +#define E1000_DEV_ID_82576_NS 0x150A +#define E1000_DEV_ID_82576_NS_SERDES 0x1518 +#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D +#define E1000_DEV_ID_82576_VF 0x10CA +#define E1000_DEV_ID_82576_VF_HV 0x152D +#define E1000_DEV_ID_I350_VF 0x1520 +#define E1000_DEV_ID_I350_VF_HV 0x152F +#define E1000_DEV_ID_82575EB_COPPER 0x10A7 +#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 +#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 +#define E1000_DEV_ID_82580_COPPER 0x150E +#define E1000_DEV_ID_82580_FIBER 0x150F +#define E1000_DEV_ID_82580_SERDES 0x1510 +#define E1000_DEV_ID_82580_SGMII 0x1511 +#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516 +#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527 +#define E1000_DEV_ID_I350_COPPER 0x1521 +#define E1000_DEV_ID_I350_FIBER 0x1522 +#define E1000_DEV_ID_I350_SERDES 0x1523 +#define E1000_DEV_ID_I350_SGMII 0x1524 +#define E1000_DEV_ID_I350_DA4 0x1546 +#define E1000_DEV_ID_I210_COPPER 0x1533 +#define E1000_DEV_ID_I210_COPPER_OEM1 0x1534 +#define E1000_DEV_ID_I210_COPPER_IT 0x1535 +#define E1000_DEV_ID_I210_FIBER 0x1536 +#define E1000_DEV_ID_I210_SERDES 0x1537 +#define E1000_DEV_ID_I210_SGMII 0x1538 +#define E1000_DEV_ID_I210_COPPER_FLASHLESS 0x157B +#define E1000_DEV_ID_I210_SERDES_FLASHLESS 0x157C +#define E1000_DEV_ID_I211_COPPER 0x1539 +#define E1000_DEV_ID_I354_BACKPLANE_1GBPS 0x1F40 +#define E1000_DEV_ID_I354_SGMII 0x1F41 +#define E1000_DEV_ID_I354_BACKPLANE_2_5GBPS 0x1F45 +#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438 +#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A +#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C +#define E1000_DEV_ID_DH89XXCC_SFP 0x0440 + +#define E1000_REVISION_0 0 +#define E1000_REVISION_1 1 +#define E1000_REVISION_2 2 +#define E1000_REVISION_3 3 +#define E1000_REVISION_4 4 + +#define E1000_FUNC_0 0 +#define E1000_FUNC_1 1 +#define E1000_FUNC_2 2 +#define E1000_FUNC_3 3 + +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2 6 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3 9 + +enum e1000_mac_type { + e1000_undefined = 0, + e1000_82575, + e1000_82576, + e1000_82580, + e1000_i350, + e1000_i354, + e1000_i210, + e1000_i211, + e1000_vfadapt, + e1000_vfadapt_i350, + e1000_num_macs /* List is 1-based, so subtract 1 for TRUE count. */ +}; + +enum e1000_media_type { + e1000_media_type_unknown = 0, + e1000_media_type_copper = 1, + e1000_media_type_fiber = 2, + e1000_media_type_internal_serdes = 3, + e1000_num_media_types +}; + +enum e1000_nvm_type { + e1000_nvm_unknown = 0, + e1000_nvm_none, + e1000_nvm_eeprom_spi, + e1000_nvm_eeprom_microwire, + e1000_nvm_flash_hw, + e1000_nvm_invm, + e1000_nvm_flash_sw +}; + +enum e1000_nvm_override { + e1000_nvm_override_none = 0, + e1000_nvm_override_spi_small, + e1000_nvm_override_spi_large, + e1000_nvm_override_microwire_small, + e1000_nvm_override_microwire_large +}; + +enum e1000_phy_type { + e1000_phy_unknown = 0, + e1000_phy_none, + e1000_phy_m88, + e1000_phy_igp, + e1000_phy_igp_2, + e1000_phy_gg82563, + e1000_phy_igp_3, + e1000_phy_ife, + e1000_phy_82580, + e1000_phy_vf, + e1000_phy_i210, +}; + +enum e1000_bus_type { + e1000_bus_type_unknown = 0, + e1000_bus_type_pci, + e1000_bus_type_pcix, + e1000_bus_type_pci_express, + e1000_bus_type_reserved +}; + +enum e1000_bus_speed { + e1000_bus_speed_unknown = 0, + e1000_bus_speed_33, + e1000_bus_speed_66, + e1000_bus_speed_100, + e1000_bus_speed_120, + e1000_bus_speed_133, + e1000_bus_speed_2500, + e1000_bus_speed_5000, + e1000_bus_speed_reserved +}; + +enum e1000_bus_width { + e1000_bus_width_unknown = 0, + e1000_bus_width_pcie_x1, + e1000_bus_width_pcie_x2, + e1000_bus_width_pcie_x4 = 4, + e1000_bus_width_pcie_x8 = 8, + e1000_bus_width_32, + e1000_bus_width_64, + e1000_bus_width_reserved +}; + +enum e1000_1000t_rx_status { + e1000_1000t_rx_status_not_ok = 0, + e1000_1000t_rx_status_ok, + e1000_1000t_rx_status_undefined = 0xFF +}; + +enum e1000_rev_polarity { + e1000_rev_polarity_normal = 0, + e1000_rev_polarity_reversed, + e1000_rev_polarity_undefined = 0xFF +}; + +enum e1000_fc_mode { + e1000_fc_none = 0, + e1000_fc_rx_pause, + e1000_fc_tx_pause, + e1000_fc_full, + e1000_fc_default = 0xFF +}; + +enum e1000_ms_type { + e1000_ms_hw_default = 0, + e1000_ms_force_master, + e1000_ms_force_slave, + e1000_ms_auto +}; + +enum e1000_smart_speed { + e1000_smart_speed_default = 0, + e1000_smart_speed_on, + e1000_smart_speed_off +}; + +enum e1000_serdes_link_state { + e1000_serdes_link_down = 0, + e1000_serdes_link_autoneg_progress, + e1000_serdes_link_autoneg_complete, + e1000_serdes_link_forced_up +}; + +#define __le16 u16 +#define __le32 u32 +#define __le64 u64 +/* Receive Descriptor */ +struct e1000_rx_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + __le16 length; /* Length of data DMAed into data buffer */ + __le16 csum; /* Packet checksum */ + u8 status; /* Descriptor status */ + u8 errors; /* Descriptor Errors */ + __le16 special; +}; + +/* Receive Descriptor - Extended */ +union e1000_rx_desc_extended { + struct { + __le64 buffer_addr; + __le64 reserved; + } read; + struct { + struct { + __le32 mrq; /* Multiple Rx Queues */ + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length; + __le16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define MAX_PS_BUFFERS 4 + +/* Number of packet split data buffers (not including the header buffer) */ +#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1) + +/* Receive Descriptor - Packet Split */ +union e1000_rx_desc_packet_split { + struct { + /* one buffer for protocol header(s), three data buffers */ + __le64 buffer_addr[MAX_PS_BUFFERS]; + } read; + struct { + struct { + __le32 mrq; /* Multiple Rx Queues */ + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length0; /* length of buffer 0 */ + __le16 vlan; /* VLAN tag */ + } middle; + struct { + __le16 header_status; + /* length of buffers 1-3 */ + __le16 length[PS_PAGE_BUFFERS]; + } upper; + __le64 reserved; + } wb; /* writeback */ +}; + +/* Transmit Descriptor */ +struct e1000_tx_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + union { + __le32 data; + struct { + __le16 length; /* Data buffer length */ + u8 cso; /* Checksum offset */ + u8 cmd; /* Descriptor control */ + } flags; + } lower; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 css; /* Checksum start */ + __le16 special; + } fields; + } upper; +}; + +/* Offload Context Descriptor */ +struct e1000_context_desc { + union { + __le32 ip_config; + struct { + u8 ipcss; /* IP checksum start */ + u8 ipcso; /* IP checksum offset */ + __le16 ipcse; /* IP checksum end */ + } ip_fields; + } lower_setup; + union { + __le32 tcp_config; + struct { + u8 tucss; /* TCP checksum start */ + u8 tucso; /* TCP checksum offset */ + __le16 tucse; /* TCP checksum end */ + } tcp_fields; + } upper_setup; + __le32 cmd_and_length; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 hdr_len; /* Header length */ + __le16 mss; /* Maximum segment size */ + } fields; + } tcp_seg_setup; +}; + +/* Offload data descriptor */ +struct e1000_data_desc { + __le64 buffer_addr; /* Address of the descriptor's buffer address */ + union { + __le32 data; + struct { + __le16 length; /* Data buffer length */ + u8 typ_len_ext; + u8 cmd; + } flags; + } lower; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 popts; /* Packet Options */ + __le16 special; + } fields; + } upper; +}; + +/* Statistics counters collected by the MAC */ +struct e1000_hw_stats { + u64 crcerrs; + u64 algnerrc; + u64 symerrs; + u64 rxerrc; + u64 mpc; + u64 scc; + u64 ecol; + u64 mcc; + u64 latecol; + u64 colc; + u64 dc; + u64 tncrs; + u64 sec; + u64 cexterr; + u64 rlec; + u64 xonrxc; + u64 xontxc; + u64 xoffrxc; + u64 xofftxc; + u64 fcruc; + u64 prc64; + u64 prc127; + u64 prc255; + u64 prc511; + u64 prc1023; + u64 prc1522; + u64 gprc; + u64 bprc; + u64 mprc; + u64 gptc; + u64 gorc; + u64 gotc; + u64 rnbc; + u64 ruc; + u64 rfc; + u64 roc; + u64 rjc; + u64 mgprc; + u64 mgpdc; + u64 mgptc; + u64 tor; + u64 tot; + u64 tpr; + u64 tpt; + u64 ptc64; + u64 ptc127; + u64 ptc255; + u64 ptc511; + u64 ptc1023; + u64 ptc1522; + u64 mptc; + u64 bptc; + u64 tsctc; + u64 tsctfc; + u64 iac; + u64 icrxptc; + u64 icrxatc; + u64 ictxptc; + u64 ictxatc; + u64 ictxqec; + u64 ictxqmtc; + u64 icrxdmtc; + u64 icrxoc; + u64 cbtmpc; + u64 htdpmc; + u64 cbrdpc; + u64 cbrmpc; + u64 rpthc; + u64 hgptc; + u64 htcbdpc; + u64 hgorc; + u64 hgotc; + u64 lenerrs; + u64 scvpc; + u64 hrmpc; + u64 doosync; + u64 o2bgptc; + u64 o2bspc; + u64 b2ospc; + u64 b2ogprc; +}; + +struct e1000_vf_stats { + u64 base_gprc; + u64 base_gptc; + u64 base_gorc; + u64 base_gotc; + u64 base_mprc; + u64 base_gotlbc; + u64 base_gptlbc; + u64 base_gorlbc; + u64 base_gprlbc; + + u32 last_gprc; + u32 last_gptc; + u32 last_gorc; + u32 last_gotc; + u32 last_mprc; + u32 last_gotlbc; + u32 last_gptlbc; + u32 last_gorlbc; + u32 last_gprlbc; + + u64 gprc; + u64 gptc; + u64 gorc; + u64 gotc; + u64 mprc; + u64 gotlbc; + u64 gptlbc; + u64 gorlbc; + u64 gprlbc; +}; + +struct e1000_phy_stats { + u32 idle_errors; + u32 receive_errors; +}; + +struct e1000_host_mng_dhcp_cookie { + u32 signature; + u8 status; + u8 reserved0; + u16 vlan_id; + u32 reserved1; + u16 reserved2; + u8 reserved3; + u8 checksum; +}; + +/* Host Interface "Rev 1" */ +struct e1000_host_command_header { + u8 command_id; + u8 command_length; + u8 command_options; + u8 checksum; +}; + +#define E1000_HI_MAX_DATA_LENGTH 252 +struct e1000_host_command_info { + struct e1000_host_command_header command_header; + u8 command_data[E1000_HI_MAX_DATA_LENGTH]; +}; + +/* Host Interface "Rev 2" */ +struct e1000_host_mng_command_header { + u8 command_id; + u8 checksum; + u16 reserved1; + u16 reserved2; + u16 command_length; +}; + +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 +struct e1000_host_mng_command_info { + struct e1000_host_mng_command_header command_header; + u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; +}; + +#include "e1000_mac.h" +#include "e1000_phy.h" +#include "e1000_nvm.h" +#include "e1000_manage.h" +#include "e1000_mbx.h" + +/* Function pointers for the MAC. */ +struct e1000_mac_operations { + s32 (*init_params)(struct e1000_hw *); + s32 (*id_led_init)(struct e1000_hw *); + s32 (*blink_led)(struct e1000_hw *); + bool (*check_mng_mode)(struct e1000_hw *); + s32 (*check_for_link)(struct e1000_hw *); + s32 (*cleanup_led)(struct e1000_hw *); + void (*clear_hw_cntrs)(struct e1000_hw *); + void (*clear_vfta)(struct e1000_hw *); + s32 (*get_bus_info)(struct e1000_hw *); + void (*set_lan_id)(struct e1000_hw *); + s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *); + s32 (*led_on)(struct e1000_hw *); + s32 (*led_off)(struct e1000_hw *); + void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32); + s32 (*reset_hw)(struct e1000_hw *); + s32 (*init_hw)(struct e1000_hw *); + void (*shutdown_serdes)(struct e1000_hw *); + void (*power_up_serdes)(struct e1000_hw *); + s32 (*setup_link)(struct e1000_hw *); + s32 (*setup_physical_interface)(struct e1000_hw *); + s32 (*setup_led)(struct e1000_hw *); + void (*write_vfta)(struct e1000_hw *, u32, u32); + void (*config_collision_dist)(struct e1000_hw *); + int (*rar_set)(struct e1000_hw *, u8*, u32); + s32 (*read_mac_addr)(struct e1000_hw *); + s32 (*validate_mdi_setting)(struct e1000_hw *); + s32 (*acquire_swfw_sync)(struct e1000_hw *, u16); + void (*release_swfw_sync)(struct e1000_hw *, u16); +}; + +/* When to use various PHY register access functions: + * + * Func Caller + * Function Does Does When to use + * ~~~~~~~~~~~~ ~~~~~ ~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * X_reg L,P,A n/a for simple PHY reg accesses + * X_reg_locked P,A L for multiple accesses of different regs + * on different pages + * X_reg_page A L,P for multiple accesses of different regs + * on the same page + * + * Where X=[read|write], L=locking, P=sets page, A=register access + * + */ +struct e1000_phy_operations { + s32 (*init_params)(struct e1000_hw *); + s32 (*acquire)(struct e1000_hw *); + s32 (*check_polarity)(struct e1000_hw *); + s32 (*check_reset_block)(struct e1000_hw *); + s32 (*commit)(struct e1000_hw *); + s32 (*force_speed_duplex)(struct e1000_hw *); + s32 (*get_cfg_done)(struct e1000_hw *hw); + s32 (*get_cable_length)(struct e1000_hw *); + s32 (*get_info)(struct e1000_hw *); + s32 (*set_page)(struct e1000_hw *, u16); + s32 (*read_reg)(struct e1000_hw *, u32, u16 *); + s32 (*read_reg_locked)(struct e1000_hw *, u32, u16 *); + s32 (*read_reg_page)(struct e1000_hw *, u32, u16 *); + void (*release)(struct e1000_hw *); + s32 (*reset)(struct e1000_hw *); + s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); + s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); + s32 (*write_reg)(struct e1000_hw *, u32, u16); + s32 (*write_reg_locked)(struct e1000_hw *, u32, u16); + s32 (*write_reg_page)(struct e1000_hw *, u32, u16); + void (*power_up)(struct e1000_hw *); + void (*power_down)(struct e1000_hw *); + s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *); + s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8); +}; + +/* Function pointers for the NVM. */ +struct e1000_nvm_operations { + s32 (*init_params)(struct e1000_hw *); + s32 (*acquire)(struct e1000_hw *); + s32 (*read)(struct e1000_hw *, u16, u16, u16 *); + void (*release)(struct e1000_hw *); + void (*reload)(struct e1000_hw *); + s32 (*update)(struct e1000_hw *); + s32 (*valid_led_default)(struct e1000_hw *, u16 *); + s32 (*validate)(struct e1000_hw *); + s32 (*write)(struct e1000_hw *, u16, u16, u16 *); +}; + +struct e1000_mac_info { + struct e1000_mac_operations ops; + u8 addr[ETH_ADDR_LEN]; + u8 perm_addr[ETH_ADDR_LEN]; + + enum e1000_mac_type type; + + u32 collision_delta; + u32 ledctl_default; + u32 ledctl_mode1; + u32 ledctl_mode2; + u32 mc_filter_type; + u32 tx_packet_delta; + u32 txcw; + + u16 current_ifs_val; + u16 ifs_max_val; + u16 ifs_min_val; + u16 ifs_ratio; + u16 ifs_step_size; + u16 mta_reg_count; + u16 uta_reg_count; + + /* Maximum size of the MTA register table in all supported adapters */ +#define MAX_MTA_REG 128 + u32 mta_shadow[MAX_MTA_REG]; + u16 rar_entry_count; + + u8 forced_speed_duplex; + + bool adaptive_ifs; + bool has_fwsm; + bool arc_subsystem_valid; + bool asf_firmware_present; + bool autoneg; + bool autoneg_failed; + bool get_link_status; + bool in_ifs_mode; + enum e1000_serdes_link_state serdes_link_state; + bool serdes_has_link; + bool tx_pkt_filtering; +}; + +struct e1000_phy_info { + struct e1000_phy_operations ops; + enum e1000_phy_type type; + + enum e1000_1000t_rx_status local_rx; + enum e1000_1000t_rx_status remote_rx; + enum e1000_ms_type ms_type; + enum e1000_ms_type original_ms_type; + enum e1000_rev_polarity cable_polarity; + enum e1000_smart_speed smart_speed; + + u32 addr; + u32 id; + u32 reset_delay_us; /* in usec */ + u32 revision; + + enum e1000_media_type media_type; + + u16 autoneg_advertised; + u16 autoneg_mask; + u16 cable_length; + u16 max_cable_length; + u16 min_cable_length; + + u8 mdix; + + bool disable_polarity_correction; + bool is_mdix; + bool polarity_correction; + bool speed_downgraded; + bool autoneg_wait_to_complete; +}; + +struct e1000_nvm_info { + struct e1000_nvm_operations ops; + enum e1000_nvm_type type; + enum e1000_nvm_override override; + + u32 flash_bank_size; + u32 flash_base_addr; + + u16 word_size; + u16 delay_usec; + u16 address_bits; + u16 opcode_bits; + u16 page_size; +}; + +struct e1000_bus_info { + enum e1000_bus_type type; + enum e1000_bus_speed speed; + enum e1000_bus_width width; + + u16 func; + u16 pci_cmd_word; +}; + +struct e1000_fc_info { + u32 high_water; /* Flow control high-water mark */ + u32 low_water; /* Flow control low-water mark */ + u16 pause_time; /* Flow control pause timer */ + u16 refresh_time; /* Flow control refresh timer */ + bool send_xon; /* Flow control send XON */ + bool strict_ieee; /* Strict IEEE mode */ + enum e1000_fc_mode current_mode; /* FC mode in effect */ + enum e1000_fc_mode requested_mode; /* FC mode requested by caller */ +}; + +struct e1000_mbx_operations { + s32 (*init_params)(struct e1000_hw *hw); + s32 (*read)(struct e1000_hw *, u32 *, u16, u16); + s32 (*write)(struct e1000_hw *, u32 *, u16, u16); + s32 (*read_posted)(struct e1000_hw *, u32 *, u16, u16); + s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16); + s32 (*check_for_msg)(struct e1000_hw *, u16); + s32 (*check_for_ack)(struct e1000_hw *, u16); + s32 (*check_for_rst)(struct e1000_hw *, u16); +}; + +struct e1000_mbx_stats { + u32 msgs_tx; + u32 msgs_rx; + + u32 acks; + u32 reqs; + u32 rsts; +}; + +struct e1000_mbx_info { + struct e1000_mbx_operations ops; + struct e1000_mbx_stats stats; + u32 timeout; + u32 usec_delay; + u16 size; +}; + +struct e1000_dev_spec_82575 { + bool sgmii_active; + bool global_device_reset; + bool eee_disable; + bool module_plugged; + bool clear_semaphore_once; + u32 mtu; + struct sfp_e1000_flags eth_flags; + u8 media_port; + bool media_changed; +}; + +struct e1000_dev_spec_vf { + u32 vf_number; + u32 v2p_mailbox; +}; + +struct e1000_hw { + void *back; + + u8 *hw_addr; + u8 *flash_address; + unsigned long io_base; + + struct e1000_mac_info mac; + struct e1000_fc_info fc; + struct e1000_phy_info phy; + struct e1000_nvm_info nvm; + struct e1000_bus_info bus; + struct e1000_mbx_info mbx; + struct e1000_host_mng_dhcp_cookie mng_cookie; + + union { + struct e1000_dev_spec_82575 _82575; + struct e1000_dev_spec_vf vf; + } dev_spec; + + u16 device_id; + u16 subsystem_vendor_id; + u16 subsystem_device_id; + u16 vendor_id; + + u8 revision_id; +}; + +#include "e1000_82575.h" +#include "e1000_i210.h" + +/* These functions must be implemented by drivers */ +s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); +s32 e1000_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); +void e1000_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value); +void e1000_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value); + +#endif Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_hw.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_i210.c =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_i210.c (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_i210.c (revision 291673) @@ -0,0 +1,1003 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#include "e1000_api.h" + + +static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw); +static void e1000_release_nvm_i210(struct e1000_hw *hw); +static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw); +static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +static s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw); +static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data); + +/** + * e1000_acquire_nvm_i210 - Request for access to EEPROM + * @hw: pointer to the HW structure + * + * Acquire the necessary semaphores for exclusive access to the EEPROM. + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -E1000_ERR_NVM (-1). + **/ +static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_acquire_nvm_i210"); + + ret_val = e1000_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM); + + return ret_val; +} + +/** + * e1000_release_nvm_i210 - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit, + * then release the semaphores acquired. + **/ +static void e1000_release_nvm_i210(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_release_nvm_i210"); + + e1000_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM); +} + +/** + * e1000_acquire_swfw_sync_i210 - Acquire SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Acquire the SW/FW semaphore to access the PHY or NVM. The mask + * will also specify which port we're acquiring the lock for. + **/ +s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + u32 fwmask = mask << 16; + s32 ret_val = E1000_SUCCESS; + s32 i = 0, timeout = 200; /* FIXME: find real value to use here */ + + DEBUGFUNC("e1000_acquire_swfw_sync_i210"); + + while (i < timeout) { + if (e1000_get_hw_semaphore_i210(hw)) { + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + if (!(swfw_sync & (fwmask | swmask))) + break; + + /* + * Firmware currently using resource (fwmask) + * or other software thread using resource (swmask) + */ + e1000_put_hw_semaphore_generic(hw); + msec_delay_irq(5); + i++; + } + + if (i == timeout) { + DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n"); + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync |= swmask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); + +out: + return ret_val; +} + +/** + * e1000_release_swfw_sync_i210 - Release SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Release the SW/FW semaphore used to access the PHY or NVM. The mask + * will also specify which port we're releasing the lock for. + **/ +void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + + DEBUGFUNC("e1000_release_swfw_sync_i210"); + + while (e1000_get_hw_semaphore_i210(hw) != E1000_SUCCESS) + ; /* Empty */ + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + swfw_sync &= ~mask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); +} + +/** + * e1000_get_hw_semaphore_i210 - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM + **/ +static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw) +{ + u32 swsm; + s32 timeout = hw->nvm.word_size + 1; + s32 i = 0; + + DEBUGFUNC("e1000_get_hw_semaphore_i210"); + + /* Get the SW semaphore */ + while (i < timeout) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + usec_delay(50); + i++; + } + + if (i == timeout) { + /* In rare circumstances, the SW semaphore may already be held + * unintentionally. Clear the semaphore once before giving up. + */ + if (hw->dev_spec._82575.clear_semaphore_once) { + hw->dev_spec._82575.clear_semaphore_once = FALSE; + e1000_put_hw_semaphore_generic(hw); + for (i = 0; i < timeout; i++) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + usec_delay(50); + } + } + + /* If we do not have the semaphore here, we have to give up. */ + if (i == timeout) { + DEBUGOUT("Driver can't access device - SMBI bit is set.\n"); + return -E1000_ERR_NVM; + } + } + + /* Get the FW semaphore. */ + for (i = 0; i < timeout; i++) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI); + + /* Semaphore acquired if bit latched */ + if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI) + break; + + usec_delay(50); + } + + if (i == timeout) { + /* Release semaphores */ + e1000_put_hw_semaphore_generic(hw); + DEBUGOUT("Driver can't access the NVM\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register + * @hw: pointer to the HW structure + * @offset: offset of word in the Shadow Ram to read + * @words: number of words to read + * @data: word read from the Shadow Ram + * + * Reads a 16 bit word from the Shadow Ram using the EERD register. + * Uses necessary synchronization semaphores. + **/ +s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 status = E1000_SUCCESS; + u16 i, count; + + DEBUGFUNC("e1000_read_nvm_srrd_i210"); + + /* We cannot hold synchronization semaphores for too long, + * because of forceful takeover procedure. However it is more efficient + * to read in bursts than synchronizing access for each word. */ + for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) { + count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ? + E1000_EERD_EEWR_MAX_COUNT : (words - i); + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + status = e1000_read_nvm_eerd(hw, offset, count, + data + i); + hw->nvm.ops.release(hw); + } else { + status = E1000_ERR_SWFW_SYNC; + } + + if (status != E1000_SUCCESS) + break; + } + + return status; +} + +/** + * e1000_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow RAM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow RAM + * + * Writes data to Shadow RAM at offset using EEWR register. + * + * If e1000_update_nvm_checksum is not called after this function , the + * data will not be committed to FLASH and also Shadow RAM will most likely + * contain an invalid checksum. + * + * If error code is returned, data and Shadow RAM may be inconsistent - buffer + * partially written. + **/ +s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 status = E1000_SUCCESS; + u16 i, count; + + DEBUGFUNC("e1000_write_nvm_srwr_i210"); + + /* We cannot hold synchronization semaphores for too long, + * because of forceful takeover procedure. However it is more efficient + * to write in bursts than synchronizing access for each word. */ + for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) { + count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ? + E1000_EERD_EEWR_MAX_COUNT : (words - i); + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + status = e1000_write_nvm_srwr(hw, offset, count, + data + i); + hw->nvm.ops.release(hw); + } else { + status = E1000_ERR_SWFW_SYNC; + } + + if (status != E1000_SUCCESS) + break; + } + + return status; +} + +/** + * e1000_write_nvm_srwr - Write to Shadow Ram using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow Ram to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow Ram + * + * Writes data to Shadow Ram at offset using EEWR register. + * + * If e1000_update_nvm_checksum is not called after this function , the + * Shadow Ram will most likely contain an invalid checksum. + **/ +static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i, k, eewr = 0; + u32 attempts = 100000; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_write_nvm_srwr"); + + /* + * A check for invalid values: offset too large, too many words, + * too many words for the offset, and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + + for (i = 0; i < words; i++) { + eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) | + (data[i] << E1000_NVM_RW_REG_DATA) | + E1000_NVM_RW_REG_START; + + E1000_WRITE_REG(hw, E1000_SRWR, eewr); + + for (k = 0; k < attempts; k++) { + if (E1000_NVM_RW_REG_DONE & + E1000_READ_REG(hw, E1000_SRWR)) { + ret_val = E1000_SUCCESS; + break; + } + usec_delay(5); + } + + if (ret_val != E1000_SUCCESS) { + DEBUGOUT("Shadow RAM write EEWR timed out\n"); + break; + } + } + +out: + return ret_val; +} + +/** e1000_read_invm_word_i210 - Reads OTP + * @hw: pointer to the HW structure + * @address: the word address (aka eeprom offset) to read + * @data: pointer to the data read + * + * Reads 16-bit words from the OTP. Return error when the word is not + * stored in OTP. + **/ +static s32 e1000_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data) +{ + s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND; + u32 invm_dword; + u16 i; + u8 record_type, word_address; + + DEBUGFUNC("e1000_read_invm_word_i210"); + + for (i = 0; i < E1000_INVM_SIZE; i++) { + invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i)); + /* Get record type */ + record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword); + if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE) + break; + if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE) + i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS; + if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE) + i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS; + if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) { + word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword); + if (word_address == address) { + *data = INVM_DWORD_TO_WORD_DATA(invm_dword); + DEBUGOUT2("Read INVM Word 0x%02x = %x", + address, *data); + status = E1000_SUCCESS; + break; + } + } + } + if (status != E1000_SUCCESS) + DEBUGOUT1("Requested word 0x%02x not found in OTP\n", address); + return status; +} + +/** e1000_read_invm_i210 - Read invm wrapper function for I210/I211 + * @hw: pointer to the HW structure + * @address: the word address (aka eeprom offset) to read + * @data: pointer to the data read + * + * Wrapper function to return data formerly found in the NVM. + **/ +static s32 e1000_read_invm_i210(struct e1000_hw *hw, u16 offset, + u16 E1000_UNUSEDARG words, u16 *data) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_read_invm_i210"); + + /* Only the MAC addr is required to be present in the iNVM */ + switch (offset) { + case NVM_MAC_ADDR: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, &data[0]); + ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+1, + &data[1]); + ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+2, + &data[2]); + if (ret_val != E1000_SUCCESS) + DEBUGOUT("MAC Addr not found in iNVM\n"); + break; + case NVM_INIT_CTRL_2: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_INIT_CTRL_2_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_INIT_CTRL_4: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_INIT_CTRL_4_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_LED_1_CFG: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_LED_1_CFG_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_LED_0_2_CFG: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_LED_0_2_CFG_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_ID_LED_SETTINGS: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = ID_LED_RESERVED_FFFF; + ret_val = E1000_SUCCESS; + } + break; + case NVM_SUB_DEV_ID: + *data = hw->subsystem_device_id; + break; + case NVM_SUB_VEN_ID: + *data = hw->subsystem_vendor_id; + break; + case NVM_DEV_ID: + *data = hw->device_id; + break; + case NVM_VEN_ID: + *data = hw->vendor_id; + break; + default: + DEBUGOUT1("NVM word 0x%02x is not mapped.\n", offset); + *data = NVM_RESERVED_WORD; + break; + } + return ret_val; +} + +/** + * e1000_read_invm_version - Reads iNVM version and image type + * @hw: pointer to the HW structure + * @invm_ver: version structure for the version read + * + * Reads iNVM version and image type. + **/ +s32 e1000_read_invm_version(struct e1000_hw *hw, + struct e1000_fw_version *invm_ver) +{ + u32 *record = NULL; + u32 *next_record = NULL; + u32 i = 0; + u32 invm_dword = 0; + u32 invm_blocks = E1000_INVM_SIZE - (E1000_INVM_ULT_BYTES_SIZE / + E1000_INVM_RECORD_SIZE_IN_BYTES); + u32 buffer[E1000_INVM_SIZE]; + s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND; + u16 version = 0; + + DEBUGFUNC("e1000_read_invm_version"); + + /* Read iNVM memory */ + for (i = 0; i < E1000_INVM_SIZE; i++) { + invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i)); + buffer[i] = invm_dword; + } + + /* Read version number */ + for (i = 1; i < invm_blocks; i++) { + record = &buffer[invm_blocks - i]; + next_record = &buffer[invm_blocks - i + 1]; + + /* Check if we have first version location used */ + if ((i == 1) && ((*record & E1000_INVM_VER_FIELD_ONE) == 0)) { + version = 0; + status = E1000_SUCCESS; + break; + } + /* Check if we have second version location used */ + else if ((i == 1) && + ((*record & E1000_INVM_VER_FIELD_TWO) == 0)) { + version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3; + status = E1000_SUCCESS; + break; + } + /* + * Check if we have odd version location + * used and it is the last one used + */ + else if ((((*record & E1000_INVM_VER_FIELD_ONE) == 0) && + ((*record & 0x3) == 0)) || (((*record & 0x3) != 0) && + (i != 1))) { + version = (*next_record & E1000_INVM_VER_FIELD_TWO) + >> 13; + status = E1000_SUCCESS; + break; + } + /* + * Check if we have even version location + * used and it is the last one used + */ + else if (((*record & E1000_INVM_VER_FIELD_TWO) == 0) && + ((*record & 0x3) == 0)) { + version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3; + status = E1000_SUCCESS; + break; + } + } + + if (status == E1000_SUCCESS) { + invm_ver->invm_major = (version & E1000_INVM_MAJOR_MASK) + >> E1000_INVM_MAJOR_SHIFT; + invm_ver->invm_minor = version & E1000_INVM_MINOR_MASK; + } + /* Read Image Type */ + for (i = 1; i < invm_blocks; i++) { + record = &buffer[invm_blocks - i]; + next_record = &buffer[invm_blocks - i + 1]; + + /* Check if we have image type in first location used */ + if ((i == 1) && ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) { + invm_ver->invm_img_type = 0; + status = E1000_SUCCESS; + break; + } + /* Check if we have image type in first location used */ + else if ((((*record & 0x3) == 0) && + ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) || + ((((*record & 0x3) != 0) && (i != 1)))) { + invm_ver->invm_img_type = + (*next_record & E1000_INVM_IMGTYPE_FIELD) >> 23; + status = E1000_SUCCESS; + break; + } + } + return status; +} + +/** + * e1000_validate_nvm_checksum_i210 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + s32 (*read_op_ptr)(struct e1000_hw *, u16, u16, u16 *); + + DEBUGFUNC("e1000_validate_nvm_checksum_i210"); + + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + + /* + * Replace the read function with semaphore grabbing with + * the one that skips this for a while. + * We have semaphore taken already here. + */ + read_op_ptr = hw->nvm.ops.read; + hw->nvm.ops.read = e1000_read_nvm_eerd; + + status = e1000_validate_nvm_checksum_generic(hw); + + /* Revert original read operation. */ + hw->nvm.ops.read = read_op_ptr; + + hw->nvm.ops.release(hw); + } else { + status = E1000_ERR_SWFW_SYNC; + } + + return status; +} + + +/** + * e1000_update_nvm_checksum_i210 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. Next commit EEPROM data onto the Flash. + **/ +s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw) +{ + s32 ret_val; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_update_nvm_checksum_i210"); + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + ret_val = e1000_read_nvm_eerd(hw, 0, 1, &nvm_data); + if (ret_val != E1000_SUCCESS) { + DEBUGOUT("EEPROM read failed\n"); + goto out; + } + + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + /* + * Do not use hw->nvm.ops.write, hw->nvm.ops.read + * because we do not want to take the synchronization + * semaphores twice here. + */ + + for (i = 0; i < NVM_CHECKSUM_REG; i++) { + ret_val = e1000_read_nvm_eerd(hw, i, 1, &nvm_data); + if (ret_val) { + hw->nvm.ops.release(hw); + DEBUGOUT("NVM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (u16) NVM_SUM - checksum; + ret_val = e1000_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1, + &checksum); + if (ret_val != E1000_SUCCESS) { + hw->nvm.ops.release(hw); + DEBUGOUT("NVM Write Error while updating checksum.\n"); + goto out; + } + + hw->nvm.ops.release(hw); + + ret_val = e1000_update_flash_i210(hw); + } else { + ret_val = E1000_ERR_SWFW_SYNC; + } +out: + return ret_val; +} + +/** + * e1000_get_flash_presence_i210 - Check if flash device is detected. + * @hw: pointer to the HW structure + * + **/ +bool e1000_get_flash_presence_i210(struct e1000_hw *hw) +{ + u32 eec = 0; + bool ret_val = FALSE; + + DEBUGFUNC("e1000_get_flash_presence_i210"); + + eec = E1000_READ_REG(hw, E1000_EECD); + + if (eec & E1000_EECD_FLASH_DETECTED_I210) + ret_val = TRUE; + + return ret_val; +} + +/** + * e1000_update_flash_i210 - Commit EEPROM to the flash + * @hw: pointer to the HW structure + * + **/ +s32 e1000_update_flash_i210(struct e1000_hw *hw) +{ + s32 ret_val; + u32 flup; + + DEBUGFUNC("e1000_update_flash_i210"); + + ret_val = e1000_pool_flash_update_done_i210(hw); + if (ret_val == -E1000_ERR_NVM) { + DEBUGOUT("Flash update time out\n"); + goto out; + } + + flup = E1000_READ_REG(hw, E1000_EECD) | E1000_EECD_FLUPD_I210; + E1000_WRITE_REG(hw, E1000_EECD, flup); + + ret_val = e1000_pool_flash_update_done_i210(hw); + if (ret_val == E1000_SUCCESS) + DEBUGOUT("Flash update complete\n"); + else + DEBUGOUT("Flash update time out\n"); + +out: + return ret_val; +} + +/** + * e1000_pool_flash_update_done_i210 - Pool FLUDONE status. + * @hw: pointer to the HW structure + * + **/ +s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw) +{ + s32 ret_val = -E1000_ERR_NVM; + u32 i, reg; + + DEBUGFUNC("e1000_pool_flash_update_done_i210"); + + for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) { + reg = E1000_READ_REG(hw, E1000_EECD); + if (reg & E1000_EECD_FLUDONE_I210) { + ret_val = E1000_SUCCESS; + break; + } + usec_delay(5); + } + + return ret_val; +} + +/** + * e1000_init_nvm_params_i210 - Initialize i210 NVM function pointers + * @hw: pointer to the HW structure + * + * Initialize the i210/i211 NVM parameters and function pointers. + **/ +static s32 e1000_init_nvm_params_i210(struct e1000_hw *hw) +{ + s32 ret_val; + struct e1000_nvm_info *nvm = &hw->nvm; + + DEBUGFUNC("e1000_init_nvm_params_i210"); + + ret_val = e1000_init_nvm_params_82575(hw); + nvm->ops.acquire = e1000_acquire_nvm_i210; + nvm->ops.release = e1000_release_nvm_i210; + nvm->ops.valid_led_default = e1000_valid_led_default_i210; + if (e1000_get_flash_presence_i210(hw)) { + hw->nvm.type = e1000_nvm_flash_hw; + nvm->ops.read = e1000_read_nvm_srrd_i210; + nvm->ops.write = e1000_write_nvm_srwr_i210; + nvm->ops.validate = e1000_validate_nvm_checksum_i210; + nvm->ops.update = e1000_update_nvm_checksum_i210; + } else { + hw->nvm.type = e1000_nvm_invm; + nvm->ops.read = e1000_read_invm_i210; + nvm->ops.write = e1000_null_write_nvm; + nvm->ops.validate = e1000_null_ops_generic; + nvm->ops.update = e1000_null_ops_generic; + } + return ret_val; +} + +/** + * e1000_init_function_pointers_i210 - Init func ptrs. + * @hw: pointer to the HW structure + * + * Called to initialize all function pointers and parameters. + **/ +void e1000_init_function_pointers_i210(struct e1000_hw *hw) +{ + e1000_init_function_pointers_82575(hw); + hw->nvm.ops.init_params = e1000_init_nvm_params_i210; + + return; +} + +/** + * e1000_valid_led_default_i210 - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_valid_led_default_i210"); + + ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { + switch (hw->phy.media_type) { + case e1000_media_type_internal_serdes: + *data = ID_LED_DEFAULT_I210_SERDES; + break; + case e1000_media_type_copper: + default: + *data = ID_LED_DEFAULT_I210; + break; + } + } +out: + return ret_val; +} + +/** + * __e1000_access_xmdio_reg - Read/write XMDIO register + * @hw: pointer to the HW structure + * @address: XMDIO address to program + * @dev_addr: device address to program + * @data: pointer to value to read/write from/to the XMDIO address + * @read: boolean flag to indicate read or write + **/ +static s32 __e1000_access_xmdio_reg(struct e1000_hw *hw, u16 address, + u8 dev_addr, u16 *data, bool read) +{ + s32 ret_val; + + DEBUGFUNC("__e1000_access_xmdio_reg"); + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA | + dev_addr); + if (ret_val) + return ret_val; + + if (read) + ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data); + else + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data); + if (ret_val) + return ret_val; + + /* Recalibrate the device back to 0 */ + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0); + if (ret_val) + return ret_val; + + return ret_val; +} + +/** + * e1000_read_xmdio_reg - Read XMDIO register + * @hw: pointer to the HW structure + * @addr: XMDIO address to program + * @dev_addr: device address to program + * @data: value to be read from the EMI address + **/ +s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data) +{ + DEBUGFUNC("e1000_read_xmdio_reg"); + + return __e1000_access_xmdio_reg(hw, addr, dev_addr, data, TRUE); +} + +/** + * e1000_write_xmdio_reg - Write XMDIO register + * @hw: pointer to the HW structure + * @addr: XMDIO address to program + * @dev_addr: device address to program + * @data: value to be written to the XMDIO address + **/ +s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data) +{ + DEBUGFUNC("e1000_read_xmdio_reg"); + + return __e1000_access_xmdio_reg(hw, addr, dev_addr, &data, FALSE); +} + +/** + * e1000_pll_workaround_i210 + * @hw: pointer to the HW structure + * + * Works around an errata in the PLL circuit where it occasionally + * provides the wrong clock frequency after power up. + **/ +static s32 e1000_pll_workaround_i210(struct e1000_hw *hw) +{ + s32 ret_val; + u32 wuc, mdicnfg, ctrl, ctrl_ext, reg_val; + u16 nvm_word, phy_word, pci_word, tmp_nvm; + int i; + + /* Get and set needed register values */ + wuc = E1000_READ_REG(hw, E1000_WUC); + mdicnfg = E1000_READ_REG(hw, E1000_MDICNFG); + reg_val = mdicnfg & ~E1000_MDICNFG_EXT_MDIO; + E1000_WRITE_REG(hw, E1000_MDICNFG, reg_val); + + /* Get data from NVM, or set default */ + ret_val = e1000_read_invm_word_i210(hw, E1000_INVM_AUTOLOAD, + &nvm_word); + if (ret_val != E1000_SUCCESS) + nvm_word = E1000_INVM_DEFAULT_AL; + tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL; + for (i = 0; i < E1000_MAX_PLL_TRIES; i++) { + /* check current state directly from internal PHY */ + e1000_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE | + E1000_PHY_PLL_FREQ_REG), &phy_word); + if ((phy_word & E1000_PHY_PLL_UNCONF) + != E1000_PHY_PLL_UNCONF) { + ret_val = E1000_SUCCESS; + break; + } else { + ret_val = -E1000_ERR_PHY; + } + /* directly reset the internal PHY */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl|E1000_CTRL_PHY_RST); + + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext |= (E1000_CTRL_EXT_PHYPDEN | E1000_CTRL_EXT_SDLPE); + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + + E1000_WRITE_REG(hw, E1000_WUC, 0); + reg_val = (E1000_INVM_AUTOLOAD << 4) | (tmp_nvm << 16); + E1000_WRITE_REG(hw, E1000_EEARBC_I210, reg_val); + + e1000_read_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word); + pci_word |= E1000_PCI_PMCSR_D3; + e1000_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word); + msec_delay(1); + pci_word &= ~E1000_PCI_PMCSR_D3; + e1000_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word); + reg_val = (E1000_INVM_AUTOLOAD << 4) | (nvm_word << 16); + E1000_WRITE_REG(hw, E1000_EEARBC_I210, reg_val); + + /* restore WUC register */ + E1000_WRITE_REG(hw, E1000_WUC, wuc); + } + /* restore MDICNFG setting */ + E1000_WRITE_REG(hw, E1000_MDICNFG, mdicnfg); + return ret_val; +} + +/** + * e1000_init_hw_i210 - Init hw for I210/I211 + * @hw: pointer to the HW structure + * + * Called to initialize hw for i210 hw family. + **/ +s32 e1000_init_hw_i210(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_init_hw_i210"); + if ((hw->mac.type >= e1000_i210) && + !(e1000_get_flash_presence_i210(hw))) { + ret_val = e1000_pll_workaround_i210(hw); + if (ret_val != E1000_SUCCESS) + return ret_val; + } + ret_val = e1000_init_hw_82575(hw); + return ret_val; +} Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_i210.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_i210.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_i210.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_i210.h (revision 291673) @@ -0,0 +1,111 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_I210_H_ +#define _E1000_I210_H_ + +bool e1000_get_flash_presence_i210(struct e1000_hw *hw); +s32 e1000_update_flash_i210(struct e1000_hw *hw); +s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw); +s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw); +s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); +s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); +s32 e1000_read_invm_version(struct e1000_hw *hw, + struct e1000_fw_version *invm_ver); +s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask); +void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask); +s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, + u16 *data); +s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, + u16 data); +s32 e1000_init_hw_i210(struct e1000_hw *hw); + +#define E1000_STM_OPCODE 0xDB00 +#define E1000_EEPROM_FLASH_SIZE_WORD 0x11 + +#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \ + (u8)((invm_dword) & 0x7) +#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \ + (u8)(((invm_dword) & 0x0000FE00) >> 9) +#define INVM_DWORD_TO_WORD_DATA(invm_dword) \ + (u16)(((invm_dword) & 0xFFFF0000) >> 16) + +enum E1000_INVM_STRUCTURE_TYPE { + E1000_INVM_UNINITIALIZED_STRUCTURE = 0x00, + E1000_INVM_WORD_AUTOLOAD_STRUCTURE = 0x01, + E1000_INVM_CSR_AUTOLOAD_STRUCTURE = 0x02, + E1000_INVM_PHY_REGISTER_AUTOLOAD_STRUCTURE = 0x03, + E1000_INVM_RSA_KEY_SHA256_STRUCTURE = 0x04, + E1000_INVM_INVALIDATED_STRUCTURE = 0x0F, +}; + +#define E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS 8 +#define E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS 1 +#define E1000_INVM_ULT_BYTES_SIZE 8 +#define E1000_INVM_RECORD_SIZE_IN_BYTES 4 +#define E1000_INVM_VER_FIELD_ONE 0x1FF8 +#define E1000_INVM_VER_FIELD_TWO 0x7FE000 +#define E1000_INVM_IMGTYPE_FIELD 0x1F800000 + +#define E1000_INVM_MAJOR_MASK 0x3F0 +#define E1000_INVM_MINOR_MASK 0xF +#define E1000_INVM_MAJOR_SHIFT 4 + +#define ID_LED_DEFAULT_I210 ((ID_LED_OFF1_ON2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_OFF1_OFF2)) +#define ID_LED_DEFAULT_I210_SERDES ((ID_LED_DEF1_DEF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_OFF1_ON2)) + +/* NVM offset defaults for I211 devices */ +#define NVM_INIT_CTRL_2_DEFAULT_I211 0X7243 +#define NVM_INIT_CTRL_4_DEFAULT_I211 0x00C1 +#define NVM_LED_1_CFG_DEFAULT_I211 0x0184 +#define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C + +/* PLL Defines */ +#define E1000_PCI_PMCSR 0x44 +#define E1000_PCI_PMCSR_D3 0x03 +#define E1000_MAX_PLL_TRIES 5 +#define E1000_PHY_PLL_UNCONF 0xFF +#define E1000_PHY_PLL_FREQ_PAGE 0xFC0000 +#define E1000_PHY_PLL_FREQ_REG 0x000E +#define E1000_INVM_DEFAULT_AL 0x202F +#define E1000_INVM_AUTOLOAD 0x0A +#define E1000_INVM_PLL_WO_VAL 0x0010 + +#endif Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_i210.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mac.c =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mac.c (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mac.c (revision 291673) @@ -0,0 +1,2238 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#include "e1000_api.h" + +static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw); +static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw); +static void e1000_config_collision_dist_generic(struct e1000_hw *hw); +static int e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); + +/** + * e1000_init_mac_ops_generic - Initialize MAC function pointers + * @hw: pointer to the HW structure + * + * Setups up the function pointers to no-op functions + **/ +void e1000_init_mac_ops_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + DEBUGFUNC("e1000_init_mac_ops_generic"); + + /* General Setup */ + mac->ops.init_params = e1000_null_ops_generic; + mac->ops.init_hw = e1000_null_ops_generic; + mac->ops.reset_hw = e1000_null_ops_generic; + mac->ops.setup_physical_interface = e1000_null_ops_generic; + mac->ops.get_bus_info = e1000_null_ops_generic; + mac->ops.set_lan_id = e1000_set_lan_id_multi_port_pcie; + mac->ops.read_mac_addr = e1000_read_mac_addr_generic; + mac->ops.config_collision_dist = e1000_config_collision_dist_generic; + mac->ops.clear_hw_cntrs = e1000_null_mac_generic; + /* LED */ + mac->ops.cleanup_led = e1000_null_ops_generic; + mac->ops.setup_led = e1000_null_ops_generic; + mac->ops.blink_led = e1000_null_ops_generic; + mac->ops.led_on = e1000_null_ops_generic; + mac->ops.led_off = e1000_null_ops_generic; + /* LINK */ + mac->ops.setup_link = e1000_null_ops_generic; + mac->ops.get_link_up_info = e1000_null_link_info; + mac->ops.check_for_link = e1000_null_ops_generic; + /* Management */ + mac->ops.check_mng_mode = e1000_null_mng_mode; + /* VLAN, MC, etc. */ + mac->ops.update_mc_addr_list = e1000_null_update_mc; + mac->ops.clear_vfta = e1000_null_mac_generic; + mac->ops.write_vfta = e1000_null_write_vfta; + mac->ops.rar_set = e1000_rar_set_generic; + mac->ops.validate_mdi_setting = e1000_validate_mdi_setting_generic; +} + +/** + * e1000_null_ops_generic - No-op function, returns 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_ops_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_ops_generic"); + return E1000_SUCCESS; +} + +/** + * e1000_null_mac_generic - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_mac_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_mac_generic"); + return; +} + +/** + * e1000_null_link_info - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_link_info(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG *s, u16 E1000_UNUSEDARG *d) +{ + DEBUGFUNC("e1000_null_link_info"); + return E1000_SUCCESS; +} + +/** + * e1000_null_mng_mode - No-op function, return FALSE + * @hw: pointer to the HW structure + **/ +bool e1000_null_mng_mode(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_mng_mode"); + return FALSE; +} + +/** + * e1000_null_update_mc - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_update_mc(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a) +{ + DEBUGFUNC("e1000_null_update_mc"); + return; +} + +/** + * e1000_null_write_vfta - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_write_vfta(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG a, u32 E1000_UNUSEDARG b) +{ + DEBUGFUNC("e1000_null_write_vfta"); + return; +} + +/** + * e1000_null_rar_set - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +int e1000_null_rar_set(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a) +{ + DEBUGFUNC("e1000_null_rar_set"); + return E1000_SUCCESS; +} + +/** + * e1000_get_bus_info_pci_generic - Get PCI(x) bus information + * @hw: pointer to the HW structure + * + * Determines and stores the system bus information for a particular + * network interface. The following bus information is determined and stored: + * bus speed, bus width, type (PCI/PCIx), and PCI(-x) function. + **/ +s32 e1000_get_bus_info_pci_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_bus_info *bus = &hw->bus; + u32 status = E1000_READ_REG(hw, E1000_STATUS); + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_get_bus_info_pci_generic"); + + /* PCI or PCI-X? */ + bus->type = (status & E1000_STATUS_PCIX_MODE) + ? e1000_bus_type_pcix + : e1000_bus_type_pci; + + /* Bus speed */ + if (bus->type == e1000_bus_type_pci) { + bus->speed = (status & E1000_STATUS_PCI66) + ? e1000_bus_speed_66 + : e1000_bus_speed_33; + } else { + switch (status & E1000_STATUS_PCIX_SPEED) { + case E1000_STATUS_PCIX_SPEED_66: + bus->speed = e1000_bus_speed_66; + break; + case E1000_STATUS_PCIX_SPEED_100: + bus->speed = e1000_bus_speed_100; + break; + case E1000_STATUS_PCIX_SPEED_133: + bus->speed = e1000_bus_speed_133; + break; + default: + bus->speed = e1000_bus_speed_reserved; + break; + } + } + + /* Bus width */ + bus->width = (status & E1000_STATUS_BUS64) + ? e1000_bus_width_64 + : e1000_bus_width_32; + + /* Which PCI(-X) function? */ + mac->ops.set_lan_id(hw); + + return ret_val; +} + +/** + * e1000_get_bus_info_pcie_generic - Get PCIe bus information + * @hw: pointer to the HW structure + * + * Determines and stores the system bus information for a particular + * network interface. The following bus information is determined and stored: + * bus speed, bus width, type (PCIe), and PCIe function. + **/ +s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_bus_info *bus = &hw->bus; + s32 ret_val; + u16 pcie_link_status; + + DEBUGFUNC("e1000_get_bus_info_pcie_generic"); + + bus->type = e1000_bus_type_pci_express; + + ret_val = e1000_read_pcie_cap_reg(hw, PCIE_LINK_STATUS, + &pcie_link_status); + if (ret_val) { + bus->width = e1000_bus_width_unknown; + bus->speed = e1000_bus_speed_unknown; + } else { + switch (pcie_link_status & PCIE_LINK_SPEED_MASK) { + case PCIE_LINK_SPEED_2500: + bus->speed = e1000_bus_speed_2500; + break; + case PCIE_LINK_SPEED_5000: + bus->speed = e1000_bus_speed_5000; + break; + default: + bus->speed = e1000_bus_speed_unknown; + break; + } + + bus->width = (enum e1000_bus_width)((pcie_link_status & + PCIE_LINK_WIDTH_MASK) >> PCIE_LINK_WIDTH_SHIFT); + } + + mac->ops.set_lan_id(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices + * + * @hw: pointer to the HW structure + * + * Determines the LAN function id by reading memory-mapped registers + * and swaps the port value if requested. + **/ +static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw) +{ + struct e1000_bus_info *bus = &hw->bus; + u32 reg; + + /* The status register reports the correct function number + * for the device regardless of function swap state. + */ + reg = E1000_READ_REG(hw, E1000_STATUS); + bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT; +} + +/** + * e1000_set_lan_id_multi_port_pci - Set LAN id for PCI multiple port devices + * @hw: pointer to the HW structure + * + * Determines the LAN function id by reading PCI config space. + **/ +void e1000_set_lan_id_multi_port_pci(struct e1000_hw *hw) +{ + struct e1000_bus_info *bus = &hw->bus; + u16 pci_header_type; + u32 status; + + e1000_read_pci_cfg(hw, PCI_HEADER_TYPE_REGISTER, &pci_header_type); + if (pci_header_type & PCI_HEADER_TYPE_MULTIFUNC) { + status = E1000_READ_REG(hw, E1000_STATUS); + bus->func = (status & E1000_STATUS_FUNC_MASK) + >> E1000_STATUS_FUNC_SHIFT; + } else { + bus->func = 0; + } +} + +/** + * e1000_set_lan_id_single_port - Set LAN id for a single port device + * @hw: pointer to the HW structure + * + * Sets the LAN function id to zero for a single port device. + **/ +void e1000_set_lan_id_single_port(struct e1000_hw *hw) +{ + struct e1000_bus_info *bus = &hw->bus; + + bus->func = 0; +} + +/** + * e1000_clear_vfta_generic - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * Clears the register array which contains the VLAN filter table by + * setting all the values to 0. + **/ +void e1000_clear_vfta_generic(struct e1000_hw *hw) +{ + u32 offset; + + DEBUGFUNC("e1000_clear_vfta_generic"); + + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); + E1000_WRITE_FLUSH(hw); + } +} + +/** + * e1000_write_vfta_generic - Write value to VLAN filter table + * @hw: pointer to the HW structure + * @offset: register offset in VLAN filter table + * @value: register value written to VLAN filter table + * + * Writes value at the given offset in the register array which stores + * the VLAN filter table. + **/ +void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value) +{ + DEBUGFUNC("e1000_write_vfta_generic"); + + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_init_rx_addrs_generic - Initialize receive address's + * @hw: pointer to the HW structure + * @rar_count: receive address registers + * + * Setup the receive address registers by setting the base receive address + * register to the devices MAC address and clearing all the other receive + * address registers to 0. + **/ +void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count) +{ + u32 i; + u8 mac_addr[ETH_ADDR_LEN] = {0}; + + DEBUGFUNC("e1000_init_rx_addrs_generic"); + + /* Setup the receive address */ + DEBUGOUT("Programming MAC Address into RAR[0]\n"); + + hw->mac.ops.rar_set(hw, hw->mac.addr, 0); + + /* Zero out the other (rar_entry_count - 1) receive addresses */ + DEBUGOUT1("Clearing RAR[1-%u]\n", rar_count-1); + for (i = 1; i < rar_count; i++) + hw->mac.ops.rar_set(hw, mac_addr, i); +} + +/** + * e1000_check_alt_mac_addr_generic - Check for alternate MAC addr + * @hw: pointer to the HW structure + * + * Checks the nvm for an alternate MAC address. An alternate MAC address + * can be setup by pre-boot software and must be treated like a permanent + * address and must override the actual permanent MAC address. If an + * alternate MAC address is found it is programmed into RAR0, replacing + * the permanent address that was installed into RAR0 by the Si on reset. + * This function will return SUCCESS unless it encounters an error while + * reading the EEPROM. + **/ +s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) +{ + u32 i; + s32 ret_val; + u16 offset, nvm_alt_mac_addr_offset, nvm_data; + u8 alt_mac_addr[ETH_ADDR_LEN]; + + DEBUGFUNC("e1000_check_alt_mac_addr_generic"); + + ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &nvm_data); + if (ret_val) + return ret_val; + + + /* Alternate MAC address is handled by the option ROM for 82580 + * and newer. SW support not required. + */ + if (hw->mac.type >= e1000_82580) + return E1000_SUCCESS; + + ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1, + &nvm_alt_mac_addr_offset); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if ((nvm_alt_mac_addr_offset == 0xFFFF) || + (nvm_alt_mac_addr_offset == 0x0000)) + /* There is no Alternate MAC Address */ + return E1000_SUCCESS; + + if (hw->bus.func == E1000_FUNC_1) + nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1; + if (hw->bus.func == E1000_FUNC_2) + nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN2; + + if (hw->bus.func == E1000_FUNC_3) + nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN3; + for (i = 0; i < ETH_ADDR_LEN; i += 2) { + offset = nvm_alt_mac_addr_offset + (i >> 1); + ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + alt_mac_addr[i] = (u8)(nvm_data & 0xFF); + alt_mac_addr[i + 1] = (u8)(nvm_data >> 8); + } + + /* if multicast bit is set, the alternate address will not be used */ + if (alt_mac_addr[0] & 0x01) { + DEBUGOUT("Ignoring Alternate Mac Address with MC bit set\n"); + return E1000_SUCCESS; + } + + /* We have a valid alternate MAC address, and we want to treat it the + * same as the normal permanent MAC address stored by the HW into the + * RAR. Do this by mapping this address into RAR0. + */ + hw->mac.ops.rar_set(hw, alt_mac_addr, 0); + + return E1000_SUCCESS; +} + +/** + * e1000_rar_set_generic - Set receive address register + * @hw: pointer to the HW structure + * @addr: pointer to the receive address + * @index: receive address array register + * + * Sets the receive address array register at index to the address passed + * in by addr. + **/ +static int e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) +{ + u32 rar_low, rar_high; + + DEBUGFUNC("e1000_rar_set_generic"); + + /* HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + + rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); + + /* If MAC address zero, no need to set the AV bit */ + if (rar_low || rar_high) + rar_high |= E1000_RAH_AV; + + /* Some bridges will combine consecutive 32-bit writes into + * a single burst write, which will malfunction on some parts. + * The flushes avoid this. + */ + E1000_WRITE_REG(hw, E1000_RAL(index), rar_low); + E1000_WRITE_FLUSH(hw); + E1000_WRITE_REG(hw, E1000_RAH(index), rar_high); + E1000_WRITE_FLUSH(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_hash_mc_addr_generic - Generate a multicast hash value + * @hw: pointer to the HW structure + * @mc_addr: pointer to a multicast address + * + * Generates a multicast address hash value which is used to determine + * the multicast filter table array address and new table value. + **/ +u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr) +{ + u32 hash_value, hash_mask; + u8 bit_shift = 0; + + DEBUGFUNC("e1000_hash_mc_addr_generic"); + + /* Register count multiplied by bits per register */ + hash_mask = (hw->mac.mta_reg_count * 32) - 1; + + /* For a mc_filter_type of 0, bit_shift is the number of left-shifts + * where 0xFF would still fall within the hash mask. + */ + while (hash_mask >> bit_shift != 0xFF) + bit_shift++; + + /* The portion of the address that is used for the hash table + * is determined by the mc_filter_type setting. + * The algorithm is such that there is a total of 8 bits of shifting. + * The bit_shift for a mc_filter_type of 0 represents the number of + * left-shifts where the MSB of mc_addr[5] would still fall within + * the hash_mask. Case 0 does this exactly. Since there are a total + * of 8 bits of shifting, then mc_addr[4] will shift right the + * remaining number of bits. Thus 8 - bit_shift. The rest of the + * cases are a variation of this algorithm...essentially raising the + * number of bits to shift mc_addr[5] left, while still keeping the + * 8-bit shifting total. + * + * For example, given the following Destination MAC Address and an + * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask), + * we can see that the bit_shift for case 0 is 4. These are the hash + * values resulting from each mc_filter_type... + * [0] [1] [2] [3] [4] [5] + * 01 AA 00 12 34 56 + * LSB MSB + * + * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563 + * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6 + * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163 + * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634 + */ + switch (hw->mac.mc_filter_type) { + default: + case 0: + break; + case 1: + bit_shift += 1; + break; + case 2: + bit_shift += 2; + break; + case 3: + bit_shift += 4; + break; + } + + hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | + (((u16) mc_addr[5]) << bit_shift))); + + return hash_value; +} + +/** + * e1000_update_mc_addr_list_generic - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * + * Updates entire Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + **/ +void e1000_update_mc_addr_list_generic(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count) +{ + u32 hash_value, hash_bit, hash_reg; + int i; + + DEBUGFUNC("e1000_update_mc_addr_list_generic"); + + /* clear mta_shadow */ + memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); + + /* update mta_shadow from mc_addr_list */ + for (i = 0; (u32) i < mc_addr_count; i++) { + hash_value = e1000_hash_mc_addr_generic(hw, mc_addr_list); + + hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); + hash_bit = hash_value & 0x1F; + + hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit); + mc_addr_list += (ETH_ADDR_LEN); + } + + /* replace the entire MTA table */ + for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) + E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_pcix_mmrbc_workaround_generic - Fix incorrect MMRBC value + * @hw: pointer to the HW structure + * + * In certain situations, a system BIOS may report that the PCIx maximum + * memory read byte count (MMRBC) value is higher than than the actual + * value. We check the PCIx command register with the current PCIx status + * register. + **/ +void e1000_pcix_mmrbc_workaround_generic(struct e1000_hw *hw) +{ + u16 cmd_mmrbc; + u16 pcix_cmd; + u16 pcix_stat_hi_word; + u16 stat_mmrbc; + + DEBUGFUNC("e1000_pcix_mmrbc_workaround_generic"); + + /* Workaround for PCI-X issue when BIOS sets MMRBC incorrectly */ + if (hw->bus.type != e1000_bus_type_pcix) + return; + + e1000_read_pci_cfg(hw, PCIX_COMMAND_REGISTER, &pcix_cmd); + e1000_read_pci_cfg(hw, PCIX_STATUS_REGISTER_HI, &pcix_stat_hi_word); + cmd_mmrbc = (pcix_cmd & PCIX_COMMAND_MMRBC_MASK) >> + PCIX_COMMAND_MMRBC_SHIFT; + stat_mmrbc = (pcix_stat_hi_word & PCIX_STATUS_HI_MMRBC_MASK) >> + PCIX_STATUS_HI_MMRBC_SHIFT; + if (stat_mmrbc == PCIX_STATUS_HI_MMRBC_4K) + stat_mmrbc = PCIX_STATUS_HI_MMRBC_2K; + if (cmd_mmrbc > stat_mmrbc) { + pcix_cmd &= ~PCIX_COMMAND_MMRBC_MASK; + pcix_cmd |= stat_mmrbc << PCIX_COMMAND_MMRBC_SHIFT; + e1000_write_pci_cfg(hw, PCIX_COMMAND_REGISTER, &pcix_cmd); + } +} + +/** + * e1000_clear_hw_cntrs_base_generic - Clear base hardware counters + * @hw: pointer to the HW structure + * + * Clears the base hardware counters by reading the counter registers. + **/ +void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_clear_hw_cntrs_base_generic"); + + E1000_READ_REG(hw, E1000_CRCERRS); + E1000_READ_REG(hw, E1000_SYMERRS); + E1000_READ_REG(hw, E1000_MPC); + E1000_READ_REG(hw, E1000_SCC); + E1000_READ_REG(hw, E1000_ECOL); + E1000_READ_REG(hw, E1000_MCC); + E1000_READ_REG(hw, E1000_LATECOL); + E1000_READ_REG(hw, E1000_COLC); + E1000_READ_REG(hw, E1000_DC); + E1000_READ_REG(hw, E1000_SEC); + E1000_READ_REG(hw, E1000_RLEC); + E1000_READ_REG(hw, E1000_XONRXC); + E1000_READ_REG(hw, E1000_XONTXC); + E1000_READ_REG(hw, E1000_XOFFRXC); + E1000_READ_REG(hw, E1000_XOFFTXC); + E1000_READ_REG(hw, E1000_FCRUC); + E1000_READ_REG(hw, E1000_GPRC); + E1000_READ_REG(hw, E1000_BPRC); + E1000_READ_REG(hw, E1000_MPRC); + E1000_READ_REG(hw, E1000_GPTC); + E1000_READ_REG(hw, E1000_GORCL); + E1000_READ_REG(hw, E1000_GORCH); + E1000_READ_REG(hw, E1000_GOTCL); + E1000_READ_REG(hw, E1000_GOTCH); + E1000_READ_REG(hw, E1000_RNBC); + E1000_READ_REG(hw, E1000_RUC); + E1000_READ_REG(hw, E1000_RFC); + E1000_READ_REG(hw, E1000_ROC); + E1000_READ_REG(hw, E1000_RJC); + E1000_READ_REG(hw, E1000_TORL); + E1000_READ_REG(hw, E1000_TORH); + E1000_READ_REG(hw, E1000_TOTL); + E1000_READ_REG(hw, E1000_TOTH); + E1000_READ_REG(hw, E1000_TPR); + E1000_READ_REG(hw, E1000_TPT); + E1000_READ_REG(hw, E1000_MPTC); + E1000_READ_REG(hw, E1000_BPTC); +} + +/** + * e1000_check_for_copper_link_generic - Check for link (Copper) + * @hw: pointer to the HW structure + * + * Checks to see of the link status of the hardware has changed. If a + * change in link status has been detected, then we read the PHY registers + * to get the current speed/duplex if link exists. + **/ +s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + bool link; + + DEBUGFUNC("e1000_check_for_copper_link"); + + /* We only want to go out to the PHY registers to see if Auto-Neg + * has completed and/or if our link status has changed. The + * get_link_status flag is set upon receiving a Link Status + * Change or Rx Sequence Error interrupt. + */ + if (!mac->get_link_status) + return E1000_SUCCESS; + + /* First we want to see if the MII Status Register reports + * link. If so, then we want to get the current speed/duplex + * of the PHY. + */ + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) + return E1000_SUCCESS; /* No link detected */ + + mac->get_link_status = FALSE; + + /* Check if there was DownShift, must be checked + * immediately after link-up + */ + e1000_check_downshift_generic(hw); + + /* If we are forcing speed/duplex, then we simply return since + * we have already determined whether we have link or not. + */ + if (!mac->autoneg) + return -E1000_ERR_CONFIG; + + /* Auto-Neg is enabled. Auto Speed Detection takes care + * of MAC speed/duplex configuration. So we only need to + * configure Collision Distance in the MAC. + */ + mac->ops.config_collision_dist(hw); + + /* Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) + DEBUGOUT("Error configuring flow control\n"); + + return ret_val; +} + +/** + * e1000_check_for_fiber_link_generic - Check for link (Fiber) + * @hw: pointer to the HW structure + * + * Checks for link up on the hardware. If link is not up and we have + * a signal, then we need to force link up. + **/ +s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 rxcw; + u32 ctrl; + u32 status; + s32 ret_val; + + DEBUGFUNC("e1000_check_for_fiber_link_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + status = E1000_READ_REG(hw, E1000_STATUS); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + + /* If we don't have link (auto-negotiation failed or link partner + * cannot auto-negotiate), the cable is plugged in (we have signal), + * and our link partner is not trying to auto-negotiate with us (we + * are receiving idles or data), we need to force link up. We also + * need to give auto-negotiation time to complete, in case the cable + * was just plugged in. The autoneg_failed flag does this. + */ + /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ + if ((ctrl & E1000_CTRL_SWDPIN1) && !(status & E1000_STATUS_LU) && + !(rxcw & E1000_RXCW_C)) { + if (!mac->autoneg_failed) { + mac->autoneg_failed = TRUE; + return E1000_SUCCESS; + } + DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); + + /* Disable auto-negotiation in the TXCW register */ + E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE)); + + /* Force link-up and also force full-duplex. */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Configure Flow Control after forcing link up. */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) { + DEBUGOUT("Error configuring flow control\n"); + return ret_val; + } + } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { + /* If we are forcing link and we are receiving /C/ ordered + * sets, re-enable auto-negotiation in the TXCW register + * and disable forced link in the Device Control register + * in an attempt to auto-negotiate with our link partner. + */ + DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); + E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw); + E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU)); + + mac->serdes_has_link = TRUE; + } + + return E1000_SUCCESS; +} + +/** + * e1000_check_for_serdes_link_generic - Check for link (Serdes) + * @hw: pointer to the HW structure + * + * Checks for link up on the hardware. If link is not up and we have + * a signal, then we need to force link up. + **/ +s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 rxcw; + u32 ctrl; + u32 status; + s32 ret_val; + + DEBUGFUNC("e1000_check_for_serdes_link_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + status = E1000_READ_REG(hw, E1000_STATUS); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + + /* If we don't have link (auto-negotiation failed or link partner + * cannot auto-negotiate), and our link partner is not trying to + * auto-negotiate with us (we are receiving idles or data), + * we need to force link up. We also need to give auto-negotiation + * time to complete. + */ + /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ + if (!(status & E1000_STATUS_LU) && !(rxcw & E1000_RXCW_C)) { + if (!mac->autoneg_failed) { + mac->autoneg_failed = TRUE; + return E1000_SUCCESS; + } + DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); + + /* Disable auto-negotiation in the TXCW register */ + E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE)); + + /* Force link-up and also force full-duplex. */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Configure Flow Control after forcing link up. */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) { + DEBUGOUT("Error configuring flow control\n"); + return ret_val; + } + } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { + /* If we are forcing link and we are receiving /C/ ordered + * sets, re-enable auto-negotiation in the TXCW register + * and disable forced link in the Device Control register + * in an attempt to auto-negotiate with our link partner. + */ + DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); + E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw); + E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU)); + + mac->serdes_has_link = TRUE; + } else if (!(E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW))) { + /* If we force link for non-auto-negotiation switch, check + * link status based on MAC synchronization for internal + * serdes media type. + */ + /* SYNCH bit and IV bit are sticky. */ + usec_delay(10); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + if (rxcw & E1000_RXCW_SYNCH) { + if (!(rxcw & E1000_RXCW_IV)) { + mac->serdes_has_link = TRUE; + DEBUGOUT("SERDES: Link up - forced.\n"); + } + } else { + mac->serdes_has_link = FALSE; + DEBUGOUT("SERDES: Link down - force failed.\n"); + } + } + + if (E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW)) { + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_LU) { + /* SYNCH bit and IV bit are sticky, so reread rxcw. */ + usec_delay(10); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + if (rxcw & E1000_RXCW_SYNCH) { + if (!(rxcw & E1000_RXCW_IV)) { + mac->serdes_has_link = TRUE; + DEBUGOUT("SERDES: Link up - autoneg completed successfully.\n"); + } else { + mac->serdes_has_link = FALSE; + DEBUGOUT("SERDES: Link down - invalid codewords detected in autoneg.\n"); + } + } else { + mac->serdes_has_link = FALSE; + DEBUGOUT("SERDES: Link down - no sync.\n"); + } + } else { + mac->serdes_has_link = FALSE; + DEBUGOUT("SERDES: Link down - autoneg failed\n"); + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_set_default_fc_generic - Set flow control default values + * @hw: pointer to the HW structure + * + * Read the EEPROM for the default values for flow control and store the + * values. + **/ +static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 nvm_data; + u16 nvm_offset = 0; + + DEBUGFUNC("e1000_set_default_fc_generic"); + + /* Read and store word 0x0F of the EEPROM. This word contains bits + * that determine the hardware's default PAUSE (flow control) mode, + * a bit that determines whether the HW defaults to enabling or + * disabling auto-negotiation, and the direction of the + * SW defined pins. If there is no SW over-ride of the flow + * control setting, then the variable hw->fc will + * be initialized based on a value in the EEPROM. + */ + if (hw->mac.type == e1000_i350) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(hw->bus.func); + ret_val = hw->nvm.ops.read(hw, + NVM_INIT_CONTROL2_REG + + nvm_offset, + 1, &nvm_data); + } else { + ret_val = hw->nvm.ops.read(hw, + NVM_INIT_CONTROL2_REG, + 1, &nvm_data); + } + + + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (!(nvm_data & NVM_WORD0F_PAUSE_MASK)) + hw->fc.requested_mode = e1000_fc_none; + else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == + NVM_WORD0F_ASM_DIR) + hw->fc.requested_mode = e1000_fc_tx_pause; + else + hw->fc.requested_mode = e1000_fc_full; + + return E1000_SUCCESS; +} + +/** + * e1000_setup_link_generic - Setup flow control and link settings + * @hw: pointer to the HW structure + * + * Determines which flow control settings to use, then configures flow + * control. Calls the appropriate media-specific link configuration + * function. Assuming the adapter has a valid link partner, a valid link + * should be established. Assumes the hardware has previously been reset + * and the transmitter and receiver are not enabled. + **/ +s32 e1000_setup_link_generic(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_setup_link_generic"); + + /* In the case of the phy reset being blocked, we already have a link. + * We do not need to set it up again. + */ + if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) + return E1000_SUCCESS; + + /* If requested flow control is set to default, set flow control + * based on the EEPROM flow control settings. + */ + if (hw->fc.requested_mode == e1000_fc_default) { + ret_val = e1000_set_default_fc_generic(hw); + if (ret_val) + return ret_val; + } + + /* Save off the requested flow control mode for use later. Depending + * on the link partner's capabilities, we may or may not use this mode. + */ + hw->fc.current_mode = hw->fc.requested_mode; + + DEBUGOUT1("After fix-ups FlowControl is now = %x\n", + hw->fc.current_mode); + + /* Call the necessary media_type subroutine to configure the link. */ + ret_val = hw->mac.ops.setup_physical_interface(hw); + if (ret_val) + return ret_val; + + /* Initialize the flow control address, type, and PAUSE timer + * registers to their default values. This is done even if flow + * control is disabled, because it does not hurt anything to + * initialize these registers. + */ + DEBUGOUT("Initializing the Flow Control address, type and timer regs\n"); + E1000_WRITE_REG(hw, E1000_FCT, FLOW_CONTROL_TYPE); + E1000_WRITE_REG(hw, E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH); + E1000_WRITE_REG(hw, E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW); + + E1000_WRITE_REG(hw, E1000_FCTTV, hw->fc.pause_time); + + return e1000_set_fc_watermarks_generic(hw); +} + +/** + * e1000_commit_fc_settings_generic - Configure flow control + * @hw: pointer to the HW structure + * + * Write the flow control settings to the Transmit Config Word Register (TXCW) + * base on the flow control settings in e1000_mac_info. + **/ +static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 txcw; + + DEBUGFUNC("e1000_commit_fc_settings_generic"); + + /* Check for a software override of the flow control settings, and + * setup the device accordingly. If auto-negotiation is enabled, then + * software will have to set the "PAUSE" bits to the correct value in + * the Transmit Config Word Register (TXCW) and re-start auto- + * negotiation. However, if auto-negotiation is disabled, then + * software will have to manually configure the two flow control enable + * bits in the CTRL register. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but we + * do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + */ + switch (hw->fc.current_mode) { + case e1000_fc_none: + /* Flow control completely disabled by a software over-ride. */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); + break; + case e1000_fc_rx_pause: + /* Rx Flow control is enabled and Tx Flow control is disabled + * by a software over-ride. Since there really isn't a way to + * advertise that we are capable of Rx Pause ONLY, we will + * advertise that we support both symmetric and asymmetric Rx + * PAUSE. Later, we will disable the adapter's ability to send + * PAUSE frames. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); + break; + case e1000_fc_tx_pause: + /* Tx Flow control is enabled, and Rx Flow control is disabled, + * by a software over-ride. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); + break; + case e1000_fc_full: + /* Flow control (both Rx and Tx) is enabled by a software + * over-ride. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + break; + } + + E1000_WRITE_REG(hw, E1000_TXCW, txcw); + mac->txcw = txcw; + + return E1000_SUCCESS; +} + +/** + * e1000_poll_fiber_serdes_link_generic - Poll for link up + * @hw: pointer to the HW structure + * + * Polls for link up by reading the status register, if link fails to come + * up with auto-negotiation, then the link is forced if a signal is detected. + **/ +static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 i, status; + s32 ret_val; + + DEBUGFUNC("e1000_poll_fiber_serdes_link_generic"); + + /* If we have a signal (the cable is plugged in, or assumed TRUE for + * serdes media) then poll for a "Link-Up" indication in the Device + * Status Register. Time-out if a link isn't seen in 500 milliseconds + * seconds (Auto-negotiation should complete in less than 500 + * milliseconds even if the other end is doing it in SW). + */ + for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) { + msec_delay(10); + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_LU) + break; + } + if (i == FIBER_LINK_UP_LIMIT) { + DEBUGOUT("Never got a valid link from auto-neg!!!\n"); + mac->autoneg_failed = TRUE; + /* AutoNeg failed to achieve a link, so we'll call + * mac->check_for_link. This routine will force the + * link up if we detect a signal. This will allow us to + * communicate with non-autonegotiating link partners. + */ + ret_val = mac->ops.check_for_link(hw); + if (ret_val) { + DEBUGOUT("Error while checking for link\n"); + return ret_val; + } + mac->autoneg_failed = FALSE; + } else { + mac->autoneg_failed = FALSE; + DEBUGOUT("Valid Link Found\n"); + } + + return E1000_SUCCESS; +} + +/** + * e1000_setup_fiber_serdes_link_generic - Setup link for fiber/serdes + * @hw: pointer to the HW structure + * + * Configures collision distance and flow control for fiber and serdes + * links. Upon successful setup, poll for link. + **/ +s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + + DEBUGFUNC("e1000_setup_fiber_serdes_link_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + /* Take the link out of reset */ + ctrl &= ~E1000_CTRL_LRST; + + hw->mac.ops.config_collision_dist(hw); + + ret_val = e1000_commit_fc_settings_generic(hw); + if (ret_val) + return ret_val; + + /* Since auto-negotiation is enabled, take the link out of reset (the + * link will be in reset, because we previously reset the chip). This + * will restart auto-negotiation. If auto-negotiation is successful + * then the link-up status bit will be set and the flow control enable + * bits (RFCE and TFCE) will be set according to their negotiated value. + */ + DEBUGOUT("Auto-negotiation enabled\n"); + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + E1000_WRITE_FLUSH(hw); + msec_delay(1); + + /* For these adapters, the SW definable pin 1 is set when the optics + * detect a signal. If we have a signal, then poll for a "Link-Up" + * indication. + */ + if (hw->phy.media_type == e1000_media_type_internal_serdes || + (E1000_READ_REG(hw, E1000_CTRL) & E1000_CTRL_SWDPIN1)) { + ret_val = e1000_poll_fiber_serdes_link_generic(hw); + } else { + DEBUGOUT("No signal detected\n"); + } + + return ret_val; +} + +/** + * e1000_config_collision_dist_generic - Configure collision distance + * @hw: pointer to the HW structure + * + * Configures the collision distance to the default value and is used + * during link setup. + **/ +static void e1000_config_collision_dist_generic(struct e1000_hw *hw) +{ + u32 tctl; + + DEBUGFUNC("e1000_config_collision_dist_generic"); + + tctl = E1000_READ_REG(hw, E1000_TCTL); + + tctl &= ~E1000_TCTL_COLD; + tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT; + + E1000_WRITE_REG(hw, E1000_TCTL, tctl); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_set_fc_watermarks_generic - Set flow control high/low watermarks + * @hw: pointer to the HW structure + * + * Sets the flow control high/low threshold (watermark) registers. If + * flow control XON frame transmission is enabled, then set XON frame + * transmission as well. + **/ +s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw) +{ + u32 fcrtl = 0, fcrth = 0; + + DEBUGFUNC("e1000_set_fc_watermarks_generic"); + + /* Set the flow control receive threshold registers. Normally, + * these registers will be set to a default threshold that may be + * adjusted later by the driver's runtime code. However, if the + * ability to transmit pause frames is not enabled, then these + * registers will be set to 0. + */ + if (hw->fc.current_mode & e1000_fc_tx_pause) { + /* We need to set up the Receive Threshold high and low water + * marks as well as (optionally) enabling the transmission of + * XON frames. + */ + fcrtl = hw->fc.low_water; + if (hw->fc.send_xon) + fcrtl |= E1000_FCRTL_XONE; + + fcrth = hw->fc.high_water; + } + E1000_WRITE_REG(hw, E1000_FCRTL, fcrtl); + E1000_WRITE_REG(hw, E1000_FCRTH, fcrth); + + return E1000_SUCCESS; +} + +/** + * e1000_force_mac_fc_generic - Force the MAC's flow control settings + * @hw: pointer to the HW structure + * + * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the + * device control register to reflect the adapter settings. TFCE and RFCE + * need to be explicitly set by software when a copper PHY is used because + * autonegotiation is managed by the PHY rather than the MAC. Software must + * also configure these bits when link is forced on a fiber connection. + **/ +s32 e1000_force_mac_fc_generic(struct e1000_hw *hw) +{ + u32 ctrl; + + DEBUGFUNC("e1000_force_mac_fc_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + /* Because we didn't get link via the internal auto-negotiation + * mechanism (we either forced link or we got link via PHY + * auto-neg), we have to manually enable/disable transmit an + * receive flow control. + * + * The "Case" statement below enables/disable flow control + * according to the "hw->fc.current_mode" parameter. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause + * frames but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * frames but we do not receive pause frames). + * 3: Both Rx and Tx flow control (symmetric) is enabled. + * other: No other values should be possible at this point. + */ + DEBUGOUT1("hw->fc.current_mode = %u\n", hw->fc.current_mode); + + switch (hw->fc.current_mode) { + case e1000_fc_none: + ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); + break; + case e1000_fc_rx_pause: + ctrl &= (~E1000_CTRL_TFCE); + ctrl |= E1000_CTRL_RFCE; + break; + case e1000_fc_tx_pause: + ctrl &= (~E1000_CTRL_RFCE); + ctrl |= E1000_CTRL_TFCE; + break; + case e1000_fc_full: + ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + } + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + return E1000_SUCCESS; +} + +/** + * e1000_config_fc_after_link_up_generic - Configures flow control after link + * @hw: pointer to the HW structure + * + * Checks the status of auto-negotiation after link up to ensure that the + * speed and duplex were not forced. If the link needed to be forced, then + * flow control needs to be forced also. If auto-negotiation is enabled + * and did not fail, then we configure flow control based on our link + * partner. + **/ +s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val = E1000_SUCCESS; + u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg; + u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; + u16 speed, duplex; + + DEBUGFUNC("e1000_config_fc_after_link_up_generic"); + + /* Check for the case where we have fiber media and auto-neg failed + * so we had to force link. In this case, we need to force the + * configuration of the MAC to match the "fc" parameter. + */ + if (mac->autoneg_failed) { + if (hw->phy.media_type == e1000_media_type_fiber || + hw->phy.media_type == e1000_media_type_internal_serdes) + ret_val = e1000_force_mac_fc_generic(hw); + } else { + if (hw->phy.media_type == e1000_media_type_copper) + ret_val = e1000_force_mac_fc_generic(hw); + } + + if (ret_val) { + DEBUGOUT("Error forcing flow control settings\n"); + return ret_val; + } + + /* Check for the case where we have copper media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) { + /* Read the MII Status Register and check to see if AutoNeg + * has completed. We read this twice because this reg has + * some "sticky" (latched) bits. + */ + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { + DEBUGOUT("Copper PHY and Auto Neg has not completed.\n"); + return ret_val; + } + + /* The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement + * Register (Address 4) and the Auto_Negotiation Base + * Page Ability Register (Address 5) to determine how + * flow control was negotiated. + */ + ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV, + &mii_nway_adv_reg); + if (ret_val) + return ret_val; + ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY, + &mii_nway_lp_ability_reg); + if (ret_val) + return ret_val; + + /* Two bits in the Auto Negotiation Advertisement Register + * (Address 4) and two bits in the Auto Negotiation Base + * Page Ability Register (Address 5) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | e1000_fc_none + * 0 | 1 | 0 | DC | e1000_fc_none + * 0 | 1 | 1 | 0 | e1000_fc_none + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 1 | 0 | 0 | DC | e1000_fc_none + * 1 | DC | 1 | DC | e1000_fc_full + * 1 | 1 | 0 | 0 | e1000_fc_none + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * + * Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | E1000_fc_full + * + */ + if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { + /* Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise Rx + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == e1000_fc_full) { + hw->fc.current_mode = e1000_fc_full; + DEBUGOUT("Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } + } + /* For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + */ + else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_tx_pause; + DEBUGOUT("Flow Control = Tx PAUSE frames only.\n"); + } + /* For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + */ + else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } else { + /* Per the IEEE spec, at this point flow control + * should be disabled. + */ + hw->fc.current_mode = e1000_fc_none; + DEBUGOUT("Flow Control = NONE.\n"); + } + + /* Now we need to do one last check... If we auto- + * negotiated to HALF DUPLEX, flow control should not be + * enabled per IEEE 802.3 spec. + */ + ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex); + if (ret_val) { + DEBUGOUT("Error getting link speed and duplex\n"); + return ret_val; + } + + if (duplex == HALF_DUPLEX) + hw->fc.current_mode = e1000_fc_none; + + /* Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + ret_val = e1000_force_mac_fc_generic(hw); + if (ret_val) { + DEBUGOUT("Error forcing flow control settings\n"); + return ret_val; + } + } + + /* Check for the case where we have SerDes media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->phy.media_type == e1000_media_type_internal_serdes) && + mac->autoneg) { + /* Read the PCS_LSTS and check to see if AutoNeg + * has completed. + */ + pcs_status_reg = E1000_READ_REG(hw, E1000_PCS_LSTAT); + + if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) { + DEBUGOUT("PCS Auto Neg has not completed.\n"); + return ret_val; + } + + /* The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement + * Register (PCS_ANADV) and the Auto_Negotiation Base + * Page Ability Register (PCS_LPAB) to determine how + * flow control was negotiated. + */ + pcs_adv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV); + pcs_lp_ability_reg = E1000_READ_REG(hw, E1000_PCS_LPAB); + + /* Two bits in the Auto Negotiation Advertisement Register + * (PCS_ANADV) and two bits in the Auto Negotiation Base + * Page Ability Register (PCS_LPAB) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | e1000_fc_none + * 0 | 1 | 0 | DC | e1000_fc_none + * 0 | 1 | 1 | 0 | e1000_fc_none + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 1 | 0 | 0 | DC | e1000_fc_none + * 1 | DC | 1 | DC | e1000_fc_full + * 1 | 1 | 0 | 0 | e1000_fc_none + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * + * Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | e1000_fc_full + * + */ + if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) { + /* Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise Rx + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == e1000_fc_full) { + hw->fc.current_mode = e1000_fc_full; + DEBUGOUT("Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } + } + /* For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + */ + else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_tx_pause; + DEBUGOUT("Flow Control = Tx PAUSE frames only.\n"); + } + /* For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + */ + else if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } else { + /* Per the IEEE spec, at this point flow control + * should be disabled. + */ + hw->fc.current_mode = e1000_fc_none; + DEBUGOUT("Flow Control = NONE.\n"); + } + + /* Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + pcs_ctrl_reg = E1000_READ_REG(hw, E1000_PCS_LCTL); + pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL; + E1000_WRITE_REG(hw, E1000_PCS_LCTL, pcs_ctrl_reg); + + ret_val = e1000_force_mac_fc_generic(hw); + if (ret_val) { + DEBUGOUT("Error forcing flow control settings\n"); + return ret_val; + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_get_speed_and_duplex_copper_generic - Retrieve current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Read the status register for the current speed/duplex and store the current + * speed and duplex for copper connections. + **/ +s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + u32 status; + + DEBUGFUNC("e1000_get_speed_and_duplex_copper_generic"); + + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_SPEED_1000) { + *speed = SPEED_1000; + DEBUGOUT("1000 Mbs, "); + } else if (status & E1000_STATUS_SPEED_100) { + *speed = SPEED_100; + DEBUGOUT("100 Mbs, "); + } else { + *speed = SPEED_10; + DEBUGOUT("10 Mbs, "); + } + + if (status & E1000_STATUS_FD) { + *duplex = FULL_DUPLEX; + DEBUGOUT("Full Duplex\n"); + } else { + *duplex = HALF_DUPLEX; + DEBUGOUT("Half Duplex\n"); + } + + return E1000_SUCCESS; +} + +/** + * e1000_get_speed_and_duplex_fiber_generic - Retrieve current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Sets the speed and duplex to gigabit full duplex (the only possible option) + * for fiber/serdes links. + **/ +s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw E1000_UNUSEDARG *hw, + u16 *speed, u16 *duplex) +{ + DEBUGFUNC("e1000_get_speed_and_duplex_fiber_serdes_generic"); + + *speed = SPEED_1000; + *duplex = FULL_DUPLEX; + + return E1000_SUCCESS; +} + +/** + * e1000_get_hw_semaphore_generic - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM + **/ +s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw) +{ + u32 swsm; + s32 timeout = hw->nvm.word_size + 1; + s32 i = 0; + + DEBUGFUNC("e1000_get_hw_semaphore_generic"); + + /* Get the SW semaphore */ + while (i < timeout) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + usec_delay(50); + i++; + } + + if (i == timeout) { + DEBUGOUT("Driver can't access device - SMBI bit is set.\n"); + return -E1000_ERR_NVM; + } + + /* Get the FW semaphore. */ + for (i = 0; i < timeout; i++) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI); + + /* Semaphore acquired if bit latched */ + if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI) + break; + + usec_delay(50); + } + + if (i == timeout) { + /* Release semaphores */ + e1000_put_hw_semaphore_generic(hw); + DEBUGOUT("Driver can't access the NVM\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_put_hw_semaphore_generic - Release hardware semaphore + * @hw: pointer to the HW structure + * + * Release hardware semaphore used to access the PHY or NVM + **/ +void e1000_put_hw_semaphore_generic(struct e1000_hw *hw) +{ + u32 swsm; + + DEBUGFUNC("e1000_put_hw_semaphore_generic"); + + swsm = E1000_READ_REG(hw, E1000_SWSM); + + swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + + E1000_WRITE_REG(hw, E1000_SWSM, swsm); +} + +/** + * e1000_get_auto_rd_done_generic - Check for auto read completion + * @hw: pointer to the HW structure + * + * Check EEPROM for Auto Read done bit. + **/ +s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw) +{ + s32 i = 0; + + DEBUGFUNC("e1000_get_auto_rd_done_generic"); + + while (i < AUTO_READ_DONE_TIMEOUT) { + if (E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_AUTO_RD) + break; + msec_delay(1); + i++; + } + + if (i == AUTO_READ_DONE_TIMEOUT) { + DEBUGOUT("Auto read by HW from NVM has not completed.\n"); + return -E1000_ERR_RESET; + } + + return E1000_SUCCESS; +} + +/** + * e1000_valid_led_default_generic - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_valid_led_default_generic"); + + ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) + *data = ID_LED_DEFAULT; + + return E1000_SUCCESS; +} + +/** + * e1000_id_led_init_generic - + * @hw: pointer to the HW structure + * + **/ +s32 e1000_id_led_init_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + const u32 ledctl_mask = 0x000000FF; + const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; + const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; + u16 data, i, temp; + const u16 led_mask = 0x0F; + + DEBUGFUNC("e1000_id_led_init_generic"); + + ret_val = hw->nvm.ops.valid_led_default(hw, &data); + if (ret_val) + return ret_val; + + mac->ledctl_default = E1000_READ_REG(hw, E1000_LEDCTL); + mac->ledctl_mode1 = mac->ledctl_default; + mac->ledctl_mode2 = mac->ledctl_default; + + for (i = 0; i < 4; i++) { + temp = (data >> (i << 2)) & led_mask; + switch (temp) { + case ID_LED_ON1_DEF2: + case ID_LED_ON1_ON2: + case ID_LED_ON1_OFF2: + mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode1 |= ledctl_on << (i << 3); + break; + case ID_LED_OFF1_DEF2: + case ID_LED_OFF1_ON2: + case ID_LED_OFF1_OFF2: + mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode1 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + switch (temp) { + case ID_LED_DEF1_ON2: + case ID_LED_ON1_ON2: + case ID_LED_OFF1_ON2: + mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode2 |= ledctl_on << (i << 3); + break; + case ID_LED_DEF1_OFF2: + case ID_LED_ON1_OFF2: + case ID_LED_OFF1_OFF2: + mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode2 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_setup_led_generic - Configures SW controllable LED + * @hw: pointer to the HW structure + * + * This prepares the SW controllable LED for use and saves the current state + * of the LED so it can be later restored. + **/ +s32 e1000_setup_led_generic(struct e1000_hw *hw) +{ + u32 ledctl; + + DEBUGFUNC("e1000_setup_led_generic"); + + if (hw->mac.ops.setup_led != e1000_setup_led_generic) + return -E1000_ERR_CONFIG; + + if (hw->phy.media_type == e1000_media_type_fiber) { + ledctl = E1000_READ_REG(hw, E1000_LEDCTL); + hw->mac.ledctl_default = ledctl; + /* Turn off LED0 */ + ledctl &= ~(E1000_LEDCTL_LED0_IVRT | E1000_LEDCTL_LED0_BLINK | + E1000_LEDCTL_LED0_MODE_MASK); + ledctl |= (E1000_LEDCTL_MODE_LED_OFF << + E1000_LEDCTL_LED0_MODE_SHIFT); + E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl); + } else if (hw->phy.media_type == e1000_media_type_copper) { + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1); + } + + return E1000_SUCCESS; +} + +/** + * e1000_cleanup_led_generic - Set LED config to default operation + * @hw: pointer to the HW structure + * + * Remove the current LED configuration and set the LED configuration + * to the default value, saved from the EEPROM. + **/ +s32 e1000_cleanup_led_generic(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_cleanup_led_generic"); + + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_default); + return E1000_SUCCESS; +} + +/** + * e1000_blink_led_generic - Blink LED + * @hw: pointer to the HW structure + * + * Blink the LEDs which are set to be on. + **/ +s32 e1000_blink_led_generic(struct e1000_hw *hw) +{ + u32 ledctl_blink = 0; + u32 i; + + DEBUGFUNC("e1000_blink_led_generic"); + + if (hw->phy.media_type == e1000_media_type_fiber) { + /* always blink LED0 for PCI-E fiber */ + ledctl_blink = E1000_LEDCTL_LED0_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); + } else { + /* Set the blink bit for each LED that's "on" (0x0E) + * (or "off" if inverted) in ledctl_mode2. The blink + * logic in hardware only works when mode is set to "on" + * so it must be changed accordingly when the mode is + * "off" and inverted. + */ + ledctl_blink = hw->mac.ledctl_mode2; + for (i = 0; i < 32; i += 8) { + u32 mode = (hw->mac.ledctl_mode2 >> i) & + E1000_LEDCTL_LED0_MODE_MASK; + u32 led_default = hw->mac.ledctl_default >> i; + + if ((!(led_default & E1000_LEDCTL_LED0_IVRT) && + (mode == E1000_LEDCTL_MODE_LED_ON)) || + ((led_default & E1000_LEDCTL_LED0_IVRT) && + (mode == E1000_LEDCTL_MODE_LED_OFF))) { + ledctl_blink &= + ~(E1000_LEDCTL_LED0_MODE_MASK << i); + ledctl_blink |= (E1000_LEDCTL_LED0_BLINK | + E1000_LEDCTL_MODE_LED_ON) << i; + } + } + } + + E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl_blink); + + return E1000_SUCCESS; +} + +/** + * e1000_led_on_generic - Turn LED on + * @hw: pointer to the HW structure + * + * Turn LED on. + **/ +s32 e1000_led_on_generic(struct e1000_hw *hw) +{ + u32 ctrl; + + DEBUGFUNC("e1000_led_on_generic"); + + switch (hw->phy.media_type) { + case e1000_media_type_fiber: + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl &= ~E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + break; + case e1000_media_type_copper: + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode2); + break; + default: + break; + } + + return E1000_SUCCESS; +} + +/** + * e1000_led_off_generic - Turn LED off + * @hw: pointer to the HW structure + * + * Turn LED off. + **/ +s32 e1000_led_off_generic(struct e1000_hw *hw) +{ + u32 ctrl; + + DEBUGFUNC("e1000_led_off_generic"); + + switch (hw->phy.media_type) { + case e1000_media_type_fiber: + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + break; + case e1000_media_type_copper: + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1); + break; + default: + break; + } + + return E1000_SUCCESS; +} + +/** + * e1000_set_pcie_no_snoop_generic - Set PCI-express capabilities + * @hw: pointer to the HW structure + * @no_snoop: bitmap of snoop events + * + * Set the PCI-express register to snoop for events enabled in 'no_snoop'. + **/ +void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop) +{ + u32 gcr; + + DEBUGFUNC("e1000_set_pcie_no_snoop_generic"); + + if (hw->bus.type != e1000_bus_type_pci_express) + return; + + if (no_snoop) { + gcr = E1000_READ_REG(hw, E1000_GCR); + gcr &= ~(PCIE_NO_SNOOP_ALL); + gcr |= no_snoop; + E1000_WRITE_REG(hw, E1000_GCR, gcr); + } +} + +/** + * e1000_disable_pcie_master_generic - Disables PCI-express master access + * @hw: pointer to the HW structure + * + * Returns E1000_SUCCESS if successful, else returns -10 + * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused + * the master requests to be disabled. + * + * Disables PCI-Express master access and verifies there are no pending + * requests. + **/ +s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw) +{ + u32 ctrl; + s32 timeout = MASTER_DISABLE_TIMEOUT; + + DEBUGFUNC("e1000_disable_pcie_master_generic"); + + if (hw->bus.type != e1000_bus_type_pci_express) + return E1000_SUCCESS; + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + while (timeout) { + if (!(E1000_READ_REG(hw, E1000_STATUS) & + E1000_STATUS_GIO_MASTER_ENABLE) || + E1000_REMOVED(hw->hw_addr)) + break; + usec_delay(100); + timeout--; + } + + if (!timeout) { + DEBUGOUT("Master requests are pending.\n"); + return -E1000_ERR_MASTER_REQUESTS_PENDING; + } + + return E1000_SUCCESS; +} + +/** + * e1000_reset_adaptive_generic - Reset Adaptive Interframe Spacing + * @hw: pointer to the HW structure + * + * Reset the Adaptive Interframe Spacing throttle to default values. + **/ +void e1000_reset_adaptive_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + DEBUGFUNC("e1000_reset_adaptive_generic"); + + if (!mac->adaptive_ifs) { + DEBUGOUT("Not in Adaptive IFS mode!\n"); + return; + } + + mac->current_ifs_val = 0; + mac->ifs_min_val = IFS_MIN; + mac->ifs_max_val = IFS_MAX; + mac->ifs_step_size = IFS_STEP; + mac->ifs_ratio = IFS_RATIO; + + mac->in_ifs_mode = FALSE; + E1000_WRITE_REG(hw, E1000_AIT, 0); +} + +/** + * e1000_update_adaptive_generic - Update Adaptive Interframe Spacing + * @hw: pointer to the HW structure + * + * Update the Adaptive Interframe Spacing Throttle value based on the + * time between transmitted packets and time between collisions. + **/ +void e1000_update_adaptive_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + DEBUGFUNC("e1000_update_adaptive_generic"); + + if (!mac->adaptive_ifs) { + DEBUGOUT("Not in Adaptive IFS mode!\n"); + return; + } + + if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { + if (mac->tx_packet_delta > MIN_NUM_XMITS) { + mac->in_ifs_mode = TRUE; + if (mac->current_ifs_val < mac->ifs_max_val) { + if (!mac->current_ifs_val) + mac->current_ifs_val = mac->ifs_min_val; + else + mac->current_ifs_val += + mac->ifs_step_size; + E1000_WRITE_REG(hw, E1000_AIT, + mac->current_ifs_val); + } + } + } else { + if (mac->in_ifs_mode && + (mac->tx_packet_delta <= MIN_NUM_XMITS)) { + mac->current_ifs_val = 0; + mac->in_ifs_mode = FALSE; + E1000_WRITE_REG(hw, E1000_AIT, 0); + } + } +} + +/** + * e1000_validate_mdi_setting_generic - Verify MDI/MDIx settings + * @hw: pointer to the HW structure + * + * Verify that when not using auto-negotiation that MDI/MDIx is correctly + * set, which is forced to MDI mode only. + **/ +static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_validate_mdi_setting_generic"); + + if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) { + DEBUGOUT("Invalid MDI setting detected\n"); + hw->phy.mdix = 1; + return -E1000_ERR_CONFIG; + } + + return E1000_SUCCESS; +} + +/** + * e1000_validate_mdi_setting_crossover_generic - Verify MDI/MDIx settings + * @hw: pointer to the HW structure + * + * Validate the MDI/MDIx setting, allowing for auto-crossover during forced + * operation. + **/ +s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_validate_mdi_setting_crossover_generic"); + + return E1000_SUCCESS; +} + +/** + * e1000_write_8bit_ctrl_reg_generic - Write a 8bit CTRL register + * @hw: pointer to the HW structure + * @reg: 32bit register offset such as E1000_SCTL + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes an address/data control type register. There are several of these + * and they all have the format address << 8 | data and bit 31 is polled for + * completion. + **/ +s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg, + u32 offset, u8 data) +{ + u32 i, regvalue = 0; + + DEBUGFUNC("e1000_write_8bit_ctrl_reg_generic"); + + /* Set up the address and data */ + regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT); + E1000_WRITE_REG(hw, reg, regvalue); + + /* Poll the ready bit to see if the MDI read completed */ + for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) { + usec_delay(5); + regvalue = E1000_READ_REG(hw, reg); + if (regvalue & E1000_GEN_CTL_READY) + break; + } + if (!(regvalue & E1000_GEN_CTL_READY)) { + DEBUGOUT1("Reg %08x did not indicate ready\n", reg); + return -E1000_ERR_PHY; + } + + return E1000_SUCCESS; +} Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mac.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mac.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mac.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mac.h (revision 291673) @@ -0,0 +1,93 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_MAC_H_ +#define _E1000_MAC_H_ + +void e1000_init_mac_ops_generic(struct e1000_hw *hw); +#ifndef E1000_REMOVED +#define E1000_REMOVED(a) (0) +#endif /* E1000_REMOVED */ +void e1000_null_mac_generic(struct e1000_hw *hw); +s32 e1000_null_ops_generic(struct e1000_hw *hw); +s32 e1000_null_link_info(struct e1000_hw *hw, u16 *s, u16 *d); +bool e1000_null_mng_mode(struct e1000_hw *hw); +void e1000_null_update_mc(struct e1000_hw *hw, u8 *h, u32 a); +void e1000_null_write_vfta(struct e1000_hw *hw, u32 a, u32 b); +int e1000_null_rar_set(struct e1000_hw *hw, u8 *h, u32 a); +s32 e1000_blink_led_generic(struct e1000_hw *hw); +s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw); +s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw); +s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw); +s32 e1000_cleanup_led_generic(struct e1000_hw *hw); +s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw); +s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw); +s32 e1000_force_mac_fc_generic(struct e1000_hw *hw); +s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw); +s32 e1000_get_bus_info_pci_generic(struct e1000_hw *hw); +s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw); +void e1000_set_lan_id_single_port(struct e1000_hw *hw); +void e1000_set_lan_id_multi_port_pci(struct e1000_hw *hw); +s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw); +s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw *hw, + u16 *speed, u16 *duplex); +s32 e1000_id_led_init_generic(struct e1000_hw *hw); +s32 e1000_led_on_generic(struct e1000_hw *hw); +s32 e1000_led_off_generic(struct e1000_hw *hw); +void e1000_update_mc_addr_list_generic(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count); +s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw); +s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw); +s32 e1000_setup_led_generic(struct e1000_hw *hw); +s32 e1000_setup_link_generic(struct e1000_hw *hw); +s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw *hw); +s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg, + u32 offset, u8 data); + +u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr); + +void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw); +void e1000_clear_vfta_generic(struct e1000_hw *hw); +void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count); +void e1000_pcix_mmrbc_workaround_generic(struct e1000_hw *hw); +void e1000_put_hw_semaphore_generic(struct e1000_hw *hw); +s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw); +void e1000_reset_adaptive_generic(struct e1000_hw *hw); +void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop); +void e1000_update_adaptive_generic(struct e1000_hw *hw); +void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); + +#endif Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mac.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_manage.c =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_manage.c (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_manage.c (revision 291673) @@ -0,0 +1,563 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#include "e1000_api.h" + +/** + * e1000_calculate_checksum - Calculate checksum for buffer + * @buffer: pointer to EEPROM + * @length: size of EEPROM to calculate a checksum for + * + * Calculates the checksum for some buffer on a specified length. The + * checksum calculated is returned. + **/ +u8 e1000_calculate_checksum(u8 *buffer, u32 length) +{ + u32 i; + u8 sum = 0; + + DEBUGFUNC("e1000_calculate_checksum"); + + if (!buffer) + return 0; + + for (i = 0; i < length; i++) + sum += buffer[i]; + + return (u8) (0 - sum); +} + +/** + * e1000_mng_enable_host_if_generic - Checks host interface is enabled + * @hw: pointer to the HW structure + * + * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND + * + * This function checks whether the HOST IF is enabled for command operation + * and also checks whether the previous command is completed. It busy waits + * in case of previous command is not completed. + **/ +s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw) +{ + u32 hicr; + u8 i; + + DEBUGFUNC("e1000_mng_enable_host_if_generic"); + + if (!hw->mac.arc_subsystem_valid) { + DEBUGOUT("ARC subsystem not valid.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_EN)) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + /* check the previous command is completed */ + for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay_irq(1); + } + + if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { + DEBUGOUT("Previous command timeout failed .\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + return E1000_SUCCESS; +} + +/** + * e1000_check_mng_mode_generic - Generic check management mode + * @hw: pointer to the HW structure + * + * Reads the firmware semaphore register and returns TRUE (>0) if + * manageability is enabled, else FALSE (0). + **/ +bool e1000_check_mng_mode_generic(struct e1000_hw *hw) +{ + u32 fwsm = E1000_READ_REG(hw, E1000_FWSM); + + DEBUGFUNC("e1000_check_mng_mode_generic"); + + + return (fwsm & E1000_FWSM_MODE_MASK) == + (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); +} + +/** + * e1000_enable_tx_pkt_filtering_generic - Enable packet filtering on Tx + * @hw: pointer to the HW structure + * + * Enables packet filtering on transmit packets if manageability is enabled + * and host interface is enabled. + **/ +bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw) +{ + struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie; + u32 *buffer = (u32 *)&hw->mng_cookie; + u32 offset; + s32 ret_val, hdr_csum, csum; + u8 i, len; + + DEBUGFUNC("e1000_enable_tx_pkt_filtering_generic"); + + hw->mac.tx_pkt_filtering = TRUE; + + /* No manageability, no filtering */ + if (!hw->mac.ops.check_mng_mode(hw)) { + hw->mac.tx_pkt_filtering = FALSE; + return hw->mac.tx_pkt_filtering; + } + + /* If we can't read from the host interface for whatever + * reason, disable filtering. + */ + ret_val = e1000_mng_enable_host_if_generic(hw); + if (ret_val != E1000_SUCCESS) { + hw->mac.tx_pkt_filtering = FALSE; + return hw->mac.tx_pkt_filtering; + } + + /* Read in the header. Length and offset are in dwords. */ + len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2; + offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; + for (i = 0; i < len; i++) + *(buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, + offset + i); + hdr_csum = hdr->checksum; + hdr->checksum = 0; + csum = e1000_calculate_checksum((u8 *)hdr, + E1000_MNG_DHCP_COOKIE_LENGTH); + /* If either the checksums or signature don't match, then + * the cookie area isn't considered valid, in which case we + * take the safe route of assuming Tx filtering is enabled. + */ + if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { + hw->mac.tx_pkt_filtering = TRUE; + return hw->mac.tx_pkt_filtering; + } + + /* Cookie area is valid, make the final check for filtering. */ + if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) + hw->mac.tx_pkt_filtering = FALSE; + + return hw->mac.tx_pkt_filtering; +} + +/** + * e1000_mng_write_cmd_header_generic - Writes manageability command header + * @hw: pointer to the HW structure + * @hdr: pointer to the host interface command header + * + * Writes the command header after does the checksum calculation. + **/ +s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr) +{ + u16 i, length = sizeof(struct e1000_host_mng_command_header); + + DEBUGFUNC("e1000_mng_write_cmd_header_generic"); + + /* Write the whole command header structure with new checksum. */ + + hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length); + + length >>= 2; + /* Write the relevant command block into the ram area. */ + for (i = 0; i < length; i++) { + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, + *((u32 *) hdr + i)); + E1000_WRITE_FLUSH(hw); + } + + return E1000_SUCCESS; +} + +/** + * e1000_mng_host_if_write_generic - Write to the manageability host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface buffer + * @length: size of the buffer + * @offset: location in the buffer to write to + * @sum: sum of the data (not checksum) + * + * This function writes the buffer content at the offset given on the host if. + * It also does alignment considerations to do the writes in most efficient + * way. Also fills up the sum of the buffer in *buffer parameter. + **/ +s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, + u16 length, u16 offset, u8 *sum) +{ + u8 *tmp; + u8 *bufptr = buffer; + u32 data = 0; + u16 remaining, i, j, prev_bytes; + + DEBUGFUNC("e1000_mng_host_if_write_generic"); + + /* sum = only sum of the data and it is not checksum */ + + if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) + return -E1000_ERR_PARAM; + + tmp = (u8 *)&data; + prev_bytes = offset & 0x3; + offset >>= 2; + + if (prev_bytes) { + data = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset); + for (j = prev_bytes; j < sizeof(u32); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset, data); + length -= j - prev_bytes; + offset++; + } + + remaining = length & 0x3; + length -= remaining; + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant command block into the + * ram area. + */ + for (i = 0; i < length; i++) { + for (j = 0; j < sizeof(u32); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, + data); + } + if (remaining) { + for (j = 0; j < sizeof(u32); j++) { + if (j < remaining) + *(tmp + j) = *bufptr++; + else + *(tmp + j) = 0; + + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, + data); + } + + return E1000_SUCCESS; +} + +/** + * e1000_mng_write_dhcp_info_generic - Writes DHCP info to host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface + * @length: size of the buffer + * + * Writes the DHCP information to the host interface. + **/ +s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, u8 *buffer, + u16 length) +{ + struct e1000_host_mng_command_header hdr; + s32 ret_val; + u32 hicr; + + DEBUGFUNC("e1000_mng_write_dhcp_info_generic"); + + hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; + hdr.command_length = length; + hdr.reserved1 = 0; + hdr.reserved2 = 0; + hdr.checksum = 0; + + /* Enable the host interface */ + ret_val = e1000_mng_enable_host_if_generic(hw); + if (ret_val) + return ret_val; + + /* Populate the host interface with the contents of "buffer". */ + ret_val = e1000_mng_host_if_write_generic(hw, buffer, length, + sizeof(hdr), &(hdr.checksum)); + if (ret_val) + return ret_val; + + /* Write the manageability command header */ + ret_val = e1000_mng_write_cmd_header_generic(hw, &hdr); + if (ret_val) + return ret_val; + + /* Tell the ARC a new command is pending. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); + + return E1000_SUCCESS; +} + +/** + * e1000_enable_mng_pass_thru - Check if management passthrough is needed + * @hw: pointer to the HW structure + * + * Verifies the hardware needs to leave interface enabled so that frames can + * be directed to and from the management interface. + **/ +bool e1000_enable_mng_pass_thru(struct e1000_hw *hw) +{ + u32 manc; + u32 fwsm, factps; + + DEBUGFUNC("e1000_enable_mng_pass_thru"); + + if (!hw->mac.asf_firmware_present) + return FALSE; + + manc = E1000_READ_REG(hw, E1000_MANC); + + if (!(manc & E1000_MANC_RCV_TCO_EN)) + return FALSE; + + if (hw->mac.has_fwsm) { + fwsm = E1000_READ_REG(hw, E1000_FWSM); + factps = E1000_READ_REG(hw, E1000_FACTPS); + + if (!(factps & E1000_FACTPS_MNGCG) && + ((fwsm & E1000_FWSM_MODE_MASK) == + (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) + return TRUE; + } else if ((manc & E1000_MANC_SMBUS_EN) && + !(manc & E1000_MANC_ASF_EN)) { + return TRUE; + } + + return FALSE; +} + +/** + * e1000_host_interface_command - Writes buffer to host interface + * @hw: pointer to the HW structure + * @buffer: contains a command to write + * @length: the byte length of the buffer, must be multiple of 4 bytes + * + * Writes a buffer to the Host Interface. Upon success, returns E1000_SUCCESS + * else returns E1000_ERR_HOST_INTERFACE_COMMAND. + **/ +s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length) +{ + u32 hicr, i; + + DEBUGFUNC("e1000_host_interface_command"); + + if (!(hw->mac.arc_subsystem_valid)) { + DEBUGOUT("Hardware doesn't support host interface command.\n"); + return E1000_SUCCESS; + } + + if (!hw->mac.asf_firmware_present) { + DEBUGOUT("Firmware is not present.\n"); + return E1000_SUCCESS; + } + + if (length == 0 || length & 0x3 || + length > E1000_HI_MAX_BLOCK_BYTE_LENGTH) { + DEBUGOUT("Buffer length failure.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_EN)) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant command block + * into the ram area. + */ + for (i = 0; i < length; i++) + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, + *((u32 *)buffer + i)); + + /* Setting this bit tells the ARC that a new command is pending. */ + E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); + + for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay(1); + } + + /* Check command successful completion. */ + if (i == E1000_HI_COMMAND_TIMEOUT || + (!(E1000_READ_REG(hw, E1000_HICR) & E1000_HICR_SV))) { + DEBUGOUT("Command has failed with no status valid.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + for (i = 0; i < length; i++) + *((u32 *)buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, + E1000_HOST_IF, + i); + + return E1000_SUCCESS; +} +/** + * e1000_load_firmware - Writes proxy FW code buffer to host interface + * and execute. + * @hw: pointer to the HW structure + * @buffer: contains a firmware to write + * @length: the byte length of the buffer, must be multiple of 4 bytes + * + * Upon success returns E1000_SUCCESS, returns E1000_ERR_CONFIG if not enabled + * in HW else returns E1000_ERR_HOST_INTERFACE_COMMAND. + **/ +s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length) +{ + u32 hicr, hibba, fwsm, icr, i; + + DEBUGFUNC("e1000_load_firmware"); + + if (hw->mac.type < e1000_i210) { + DEBUGOUT("Hardware doesn't support loading FW by the driver\n"); + return -E1000_ERR_CONFIG; + } + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_EN)) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_CONFIG; + } + if (!(hicr & E1000_HICR_MEMORY_BASE_EN)) { + DEBUGOUT("E1000_HICR_MEMORY_BASE_EN bit disabled.\n"); + return -E1000_ERR_CONFIG; + } + + if (length == 0 || length & 0x3 || length > E1000_HI_FW_MAX_LENGTH) { + DEBUGOUT("Buffer length failure.\n"); + return -E1000_ERR_INVALID_ARGUMENT; + } + + /* Clear notification from ROM-FW by reading ICR register */ + icr = E1000_READ_REG(hw, E1000_ICR_V2); + + /* Reset ROM-FW */ + hicr = E1000_READ_REG(hw, E1000_HICR); + hicr |= E1000_HICR_FW_RESET_ENABLE; + E1000_WRITE_REG(hw, E1000_HICR, hicr); + hicr |= E1000_HICR_FW_RESET; + E1000_WRITE_REG(hw, E1000_HICR, hicr); + E1000_WRITE_FLUSH(hw); + + /* Wait till MAC notifies about its readiness after ROM-FW reset */ + for (i = 0; i < (E1000_HI_COMMAND_TIMEOUT * 2); i++) { + icr = E1000_READ_REG(hw, E1000_ICR_V2); + if (icr & E1000_ICR_MNG) + break; + msec_delay(1); + } + + /* Check for timeout */ + if (i == E1000_HI_COMMAND_TIMEOUT) { + DEBUGOUT("FW reset failed.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Wait till MAC is ready to accept new FW code */ + for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { + fwsm = E1000_READ_REG(hw, E1000_FWSM); + if ((fwsm & E1000_FWSM_FW_VALID) && + ((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT == + E1000_FWSM_HI_EN_ONLY_MODE)) + break; + msec_delay(1); + } + + /* Check for timeout */ + if (i == E1000_HI_COMMAND_TIMEOUT) { + DEBUGOUT("FW reset failed.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant FW code block + * into the ram area in DWORDs via 1kB ram addressing window. + */ + for (i = 0; i < length; i++) { + if (!(i % E1000_HI_FW_BLOCK_DWORD_LENGTH)) { + /* Point to correct 1kB ram window */ + hibba = E1000_HI_FW_BASE_ADDRESS + + ((E1000_HI_FW_BLOCK_DWORD_LENGTH << 2) * + (i / E1000_HI_FW_BLOCK_DWORD_LENGTH)); + + E1000_WRITE_REG(hw, E1000_HIBBA, hibba); + } + + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, + i % E1000_HI_FW_BLOCK_DWORD_LENGTH, + *((u32 *)buffer + i)); + } + + /* Setting this bit tells the ARC that a new FW is ready to execute. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); + + for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay(1); + } + + /* Check for successful FW start. */ + if (i == E1000_HI_COMMAND_TIMEOUT) { + DEBUGOUT("New FW did not start within timeout period.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + return E1000_SUCCESS; +} + + Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_manage.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_manage.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_manage.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_manage.h (revision 291673) @@ -0,0 +1,96 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_MANAGE_H_ +#define _E1000_MANAGE_H_ + +bool e1000_check_mng_mode_generic(struct e1000_hw *hw); +bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw); +s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw); +s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, + u16 length, u16 offset, u8 *sum); +s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr); +s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, + u8 *buffer, u16 length); +bool e1000_enable_mng_pass_thru(struct e1000_hw *hw); +u8 e1000_calculate_checksum(u8 *buffer, u32 length); +s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length); +s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length); + +enum e1000_mng_mode { + e1000_mng_mode_none = 0, + e1000_mng_mode_asf, + e1000_mng_mode_pt, + e1000_mng_mode_ipmi, + e1000_mng_mode_host_if_only +}; + +#define E1000_FACTPS_MNGCG 0x20000000 + +#define E1000_FWSM_MODE_MASK 0xE +#define E1000_FWSM_MODE_SHIFT 1 +#define E1000_FWSM_FW_VALID 0x00008000 +#define E1000_FWSM_HI_EN_ONLY_MODE 0x4 + +#define E1000_MNG_IAMT_MODE 0x3 +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 +#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 +#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1 +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 + +#define E1000_VFTA_ENTRY_SHIFT 5 +#define E1000_VFTA_ENTRY_MASK 0x7F +#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F + +#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */ +#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */ +#define E1000_HI_COMMAND_TIMEOUT 500 /* Process HI cmd limit */ +#define E1000_HI_FW_BASE_ADDRESS 0x10000 +#define E1000_HI_FW_MAX_LENGTH (64 * 1024) /* Num of bytes */ +#define E1000_HI_FW_BLOCK_DWORD_LENGTH 256 /* Num of DWORDs per page */ +#define E1000_HICR_MEMORY_BASE_EN 0x200 /* MB Enable bit - RO */ +#define E1000_HICR_EN 0x01 /* Enable bit - RO */ +/* Driver sets this bit when done to put command in RAM */ +#define E1000_HICR_C 0x02 +#define E1000_HICR_SV 0x04 /* Status Validity */ +#define E1000_HICR_FW_RESET_ENABLE 0x40 +#define E1000_HICR_FW_RESET 0x80 + +/* Intel(R) Active Management Technology signature */ +#define E1000_IAMT_SIGNATURE 0x544D4149 + +#endif Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_manage.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mbx.c =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mbx.c (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mbx.c (revision 291673) @@ -0,0 +1,771 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#include "e1000_mbx.h" + +/** + * e1000_null_mbx_check_for_flag - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +static s32 e1000_null_mbx_check_for_flag(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG mbx_id) +{ + DEBUGFUNC("e1000_null_mbx_check_flag"); + + return E1000_SUCCESS; +} + +/** + * e1000_null_mbx_transact - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +static s32 e1000_null_mbx_transact(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG *msg, + u16 E1000_UNUSEDARG size, + u16 E1000_UNUSEDARG mbx_id) +{ + DEBUGFUNC("e1000_null_mbx_rw_msg"); + + return E1000_SUCCESS; +} + +/** + * e1000_read_mbx - Reads a message from the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to read + * + * returns SUCCESS if it successfuly read message from buffer + **/ +s32 e1000_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_read_mbx"); + + /* limit read to size of mailbox */ + if (size > mbx->size) + size = mbx->size; + + if (mbx->ops.read) + ret_val = mbx->ops.read(hw, msg, size, mbx_id); + + return ret_val; +} + +/** + * e1000_write_mbx - Write a message to the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully copied message into the buffer + **/ +s32 e1000_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_write_mbx"); + + if (size > mbx->size) + ret_val = -E1000_ERR_MBX; + + else if (mbx->ops.write) + ret_val = mbx->ops.write(hw, msg, size, mbx_id); + + return ret_val; +} + +/** + * e1000_check_for_msg - checks to see if someone sent us mail + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 e1000_check_for_msg(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_msg"); + + if (mbx->ops.check_for_msg) + ret_val = mbx->ops.check_for_msg(hw, mbx_id); + + return ret_val; +} + +/** + * e1000_check_for_ack - checks to see if someone sent us ACK + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 e1000_check_for_ack(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_ack"); + + if (mbx->ops.check_for_ack) + ret_val = mbx->ops.check_for_ack(hw, mbx_id); + + return ret_val; +} + +/** + * e1000_check_for_rst - checks to see if other side has reset + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 e1000_check_for_rst(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_rst"); + + if (mbx->ops.check_for_rst) + ret_val = mbx->ops.check_for_rst(hw, mbx_id); + + return ret_val; +} + +/** + * e1000_poll_for_msg - Wait for message notification + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message notification + **/ +static s32 e1000_poll_for_msg(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + int countdown = mbx->timeout; + + DEBUGFUNC("e1000_poll_for_msg"); + + if (!countdown || !mbx->ops.check_for_msg) + goto out; + + while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) { + countdown--; + if (!countdown) + break; + usec_delay(mbx->usec_delay); + } + + /* if we failed, all future posted messages fail until reset */ + if (!countdown) + mbx->timeout = 0; +out: + return countdown ? E1000_SUCCESS : -E1000_ERR_MBX; +} + +/** + * e1000_poll_for_ack - Wait for message acknowledgement + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message acknowledgement + **/ +static s32 e1000_poll_for_ack(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + int countdown = mbx->timeout; + + DEBUGFUNC("e1000_poll_for_ack"); + + if (!countdown || !mbx->ops.check_for_ack) + goto out; + + while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) { + countdown--; + if (!countdown) + break; + usec_delay(mbx->usec_delay); + } + + /* if we failed, all future posted messages fail until reset */ + if (!countdown) + mbx->timeout = 0; +out: + return countdown ? E1000_SUCCESS : -E1000_ERR_MBX; +} + +/** + * e1000_read_posted_mbx - Wait for message notification and receive message + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message notification and + * copied it into the receive buffer. + **/ +s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_read_posted_mbx"); + + if (!mbx->ops.read) + goto out; + + ret_val = e1000_poll_for_msg(hw, mbx_id); + + /* if ack received read message, otherwise we timed out */ + if (!ret_val) + ret_val = mbx->ops.read(hw, msg, size, mbx_id); +out: + return ret_val; +} + +/** + * e1000_write_posted_mbx - Write a message to the mailbox, wait for ack + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully copied message into the buffer and + * received an ack to that message within delay * timeout period + **/ +s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_write_posted_mbx"); + + /* exit if either we can't write or there isn't a defined timeout */ + if (!mbx->ops.write || !mbx->timeout) + goto out; + + /* send msg */ + ret_val = mbx->ops.write(hw, msg, size, mbx_id); + + /* if msg sent wait until we receive an ack */ + if (!ret_val) + ret_val = e1000_poll_for_ack(hw, mbx_id); +out: + return ret_val; +} + +/** + * e1000_init_mbx_ops_generic - Initialize mbx function pointers + * @hw: pointer to the HW structure + * + * Sets the function pointers to no-op functions + **/ +void e1000_init_mbx_ops_generic(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + mbx->ops.init_params = e1000_null_ops_generic; + mbx->ops.read = e1000_null_mbx_transact; + mbx->ops.write = e1000_null_mbx_transact; + mbx->ops.check_for_msg = e1000_null_mbx_check_for_flag; + mbx->ops.check_for_ack = e1000_null_mbx_check_for_flag; + mbx->ops.check_for_rst = e1000_null_mbx_check_for_flag; + mbx->ops.read_posted = e1000_read_posted_mbx; + mbx->ops.write_posted = e1000_write_posted_mbx; +} + +/** + * e1000_read_v2p_mailbox - read v2p mailbox + * @hw: pointer to the HW structure + * + * This function is used to read the v2p mailbox without losing the read to + * clear status bits. + **/ +static u32 e1000_read_v2p_mailbox(struct e1000_hw *hw) +{ + u32 v2p_mailbox = E1000_READ_REG(hw, E1000_V2PMAILBOX(0)); + + v2p_mailbox |= hw->dev_spec.vf.v2p_mailbox; + hw->dev_spec.vf.v2p_mailbox |= v2p_mailbox & E1000_V2PMAILBOX_R2C_BITS; + + return v2p_mailbox; +} + +/** + * e1000_check_for_bit_vf - Determine if a status bit was set + * @hw: pointer to the HW structure + * @mask: bitmask for bits to be tested and cleared + * + * This function is used to check for the read to clear bits within + * the V2P mailbox. + **/ +static s32 e1000_check_for_bit_vf(struct e1000_hw *hw, u32 mask) +{ + u32 v2p_mailbox = e1000_read_v2p_mailbox(hw); + s32 ret_val = -E1000_ERR_MBX; + + if (v2p_mailbox & mask) + ret_val = E1000_SUCCESS; + + hw->dev_spec.vf.v2p_mailbox &= ~mask; + + return ret_val; +} + +/** + * e1000_check_for_msg_vf - checks to see if the PF has sent mail + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the PF has set the Status bit or else ERR_MBX + **/ +static s32 e1000_check_for_msg_vf(struct e1000_hw *hw, + u16 E1000_UNUSEDARG mbx_id) +{ + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_msg_vf"); + + if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFSTS)) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.reqs++; + } + + return ret_val; +} + +/** + * e1000_check_for_ack_vf - checks to see if the PF has ACK'd + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the PF has set the ACK bit or else ERR_MBX + **/ +static s32 e1000_check_for_ack_vf(struct e1000_hw *hw, + u16 E1000_UNUSEDARG mbx_id) +{ + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_ack_vf"); + + if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFACK)) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.acks++; + } + + return ret_val; +} + +/** + * e1000_check_for_rst_vf - checks to see if the PF has reset + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns TRUE if the PF has set the reset done bit or else FALSE + **/ +static s32 e1000_check_for_rst_vf(struct e1000_hw *hw, + u16 E1000_UNUSEDARG mbx_id) +{ + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_rst_vf"); + + if (!e1000_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD | + E1000_V2PMAILBOX_RSTI))) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.rsts++; + } + + return ret_val; +} + +/** + * e1000_obtain_mbx_lock_vf - obtain mailbox lock + * @hw: pointer to the HW structure + * + * return SUCCESS if we obtained the mailbox lock + **/ +static s32 e1000_obtain_mbx_lock_vf(struct e1000_hw *hw) +{ + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_obtain_mbx_lock_vf"); + + /* Take ownership of the buffer */ + E1000_WRITE_REG(hw, E1000_V2PMAILBOX(0), E1000_V2PMAILBOX_VFU); + + /* reserve mailbox for vf use */ + if (e1000_read_v2p_mailbox(hw) & E1000_V2PMAILBOX_VFU) + ret_val = E1000_SUCCESS; + + return ret_val; +} + +/** + * e1000_write_mbx_vf - Write a message to the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully copied message into the buffer + **/ +static s32 e1000_write_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size, + u16 E1000_UNUSEDARG mbx_id) +{ + s32 ret_val; + u16 i; + + + DEBUGFUNC("e1000_write_mbx_vf"); + + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = e1000_obtain_mbx_lock_vf(hw); + if (ret_val) + goto out_no_write; + + /* flush msg and acks as we are overwriting the message buffer */ + e1000_check_for_msg_vf(hw, 0); + e1000_check_for_ack_vf(hw, 0); + + /* copy the caller specified message to the mailbox memory buffer */ + for (i = 0; i < size; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_VMBMEM(0), i, msg[i]); + + /* update stats */ + hw->mbx.stats.msgs_tx++; + + /* Drop VFU and interrupt the PF to tell it a message has been sent */ + E1000_WRITE_REG(hw, E1000_V2PMAILBOX(0), E1000_V2PMAILBOX_REQ); + +out_no_write: + return ret_val; +} + +/** + * e1000_read_mbx_vf - Reads a message from the inbox intended for vf + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to read + * + * returns SUCCESS if it successfuly read message from buffer + **/ +static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size, + u16 E1000_UNUSEDARG mbx_id) +{ + s32 ret_val = E1000_SUCCESS; + u16 i; + + DEBUGFUNC("e1000_read_mbx_vf"); + + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = e1000_obtain_mbx_lock_vf(hw); + if (ret_val) + goto out_no_read; + + /* copy the message from the mailbox memory buffer */ + for (i = 0; i < size; i++) + msg[i] = E1000_READ_REG_ARRAY(hw, E1000_VMBMEM(0), i); + + /* Acknowledge receipt and release mailbox, then we're done */ + E1000_WRITE_REG(hw, E1000_V2PMAILBOX(0), E1000_V2PMAILBOX_ACK); + + /* update stats */ + hw->mbx.stats.msgs_rx++; + +out_no_read: + return ret_val; +} + +/** + * e1000_init_mbx_params_vf - set initial values for vf mailbox + * @hw: pointer to the HW structure + * + * Initializes the hw->mbx struct to correct values for vf mailbox + */ +s32 e1000_init_mbx_params_vf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + + /* start mailbox as timed out and let the reset_hw call set the timeout + * value to begin communications */ + mbx->timeout = 0; + mbx->usec_delay = E1000_VF_MBX_INIT_DELAY; + + mbx->size = E1000_VFMAILBOX_SIZE; + + mbx->ops.read = e1000_read_mbx_vf; + mbx->ops.write = e1000_write_mbx_vf; + mbx->ops.read_posted = e1000_read_posted_mbx; + mbx->ops.write_posted = e1000_write_posted_mbx; + mbx->ops.check_for_msg = e1000_check_for_msg_vf; + mbx->ops.check_for_ack = e1000_check_for_ack_vf; + mbx->ops.check_for_rst = e1000_check_for_rst_vf; + + mbx->stats.msgs_tx = 0; + mbx->stats.msgs_rx = 0; + mbx->stats.reqs = 0; + mbx->stats.acks = 0; + mbx->stats.rsts = 0; + + return E1000_SUCCESS; +} + +static s32 e1000_check_for_bit_pf(struct e1000_hw *hw, u32 mask) +{ + u32 mbvficr = E1000_READ_REG(hw, E1000_MBVFICR); + s32 ret_val = -E1000_ERR_MBX; + + if (mbvficr & mask) { + ret_val = E1000_SUCCESS; + E1000_WRITE_REG(hw, E1000_MBVFICR, mask); + } + + return ret_val; +} + +/** + * e1000_check_for_msg_pf - checks to see if the VF has sent mail + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 e1000_check_for_msg_pf(struct e1000_hw *hw, u16 vf_number) +{ + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_msg_pf"); + + if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFREQ_VF1 << vf_number)) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.reqs++; + } + + return ret_val; +} + +/** + * e1000_check_for_ack_pf - checks to see if the VF has ACKed + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 e1000_check_for_ack_pf(struct e1000_hw *hw, u16 vf_number) +{ + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_ack_pf"); + + if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFACK_VF1 << vf_number)) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.acks++; + } + + return ret_val; +} + +/** + * e1000_check_for_rst_pf - checks to see if the VF has reset + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 e1000_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number) +{ + u32 vflre = E1000_READ_REG(hw, E1000_VFLRE); + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_rst_pf"); + + if (vflre & (1 << vf_number)) { + ret_val = E1000_SUCCESS; + E1000_WRITE_REG(hw, E1000_VFLRE, (1 << vf_number)); + hw->mbx.stats.rsts++; + } + + return ret_val; +} + +/** + * e1000_obtain_mbx_lock_pf - obtain mailbox lock + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * return SUCCESS if we obtained the mailbox lock + **/ +static s32 e1000_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number) +{ + s32 ret_val = -E1000_ERR_MBX; + u32 p2v_mailbox; + + DEBUGFUNC("e1000_obtain_mbx_lock_pf"); + + /* Take ownership of the buffer */ + E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU); + + /* reserve mailbox for vf use */ + p2v_mailbox = E1000_READ_REG(hw, E1000_P2VMAILBOX(vf_number)); + if (p2v_mailbox & E1000_P2VMAILBOX_PFU) + ret_val = E1000_SUCCESS; + + return ret_val; +} + +/** + * e1000_write_mbx_pf - Places a message in the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @vf_number: the VF index + * + * returns SUCCESS if it successfully copied message into the buffer + **/ +static s32 e1000_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, + u16 vf_number) +{ + s32 ret_val; + u16 i; + + DEBUGFUNC("e1000_write_mbx_pf"); + + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number); + if (ret_val) + goto out_no_write; + + /* flush msg and acks as we are overwriting the message buffer */ + e1000_check_for_msg_pf(hw, vf_number); + e1000_check_for_ack_pf(hw, vf_number); + + /* copy the caller specified message to the mailbox memory buffer */ + for (i = 0; i < size; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i, msg[i]); + + /* Interrupt VF to tell it a message has been sent and release buffer*/ + E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_STS); + + /* update stats */ + hw->mbx.stats.msgs_tx++; + +out_no_write: + return ret_val; + +} + +/** + * e1000_read_mbx_pf - Read a message from the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @vf_number: the VF index + * + * This function copies a message from the mailbox buffer to the caller's + * memory buffer. The presumption is that the caller knows that there was + * a message due to a VF request so no polling for message is needed. + **/ +static s32 e1000_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, + u16 vf_number) +{ + s32 ret_val; + u16 i; + + DEBUGFUNC("e1000_read_mbx_pf"); + + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number); + if (ret_val) + goto out_no_read; + + /* copy the message to the mailbox memory buffer */ + for (i = 0; i < size; i++) + msg[i] = E1000_READ_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i); + + /* Acknowledge the message and release buffer */ + E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_ACK); + + /* update stats */ + hw->mbx.stats.msgs_rx++; + +out_no_read: + return ret_val; +} + +/** + * e1000_init_mbx_params_pf - set initial values for pf mailbox + * @hw: pointer to the HW structure + * + * Initializes the hw->mbx struct to correct values for pf mailbox + */ +s32 e1000_init_mbx_params_pf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + + switch (hw->mac.type) { + case e1000_82576: + case e1000_i350: + case e1000_i354: + mbx->timeout = 0; + mbx->usec_delay = 0; + + mbx->size = E1000_VFMAILBOX_SIZE; + + mbx->ops.read = e1000_read_mbx_pf; + mbx->ops.write = e1000_write_mbx_pf; + mbx->ops.read_posted = e1000_read_posted_mbx; + mbx->ops.write_posted = e1000_write_posted_mbx; + mbx->ops.check_for_msg = e1000_check_for_msg_pf; + mbx->ops.check_for_ack = e1000_check_for_ack_pf; + mbx->ops.check_for_rst = e1000_check_for_rst_pf; + + mbx->stats.msgs_tx = 0; + mbx->stats.msgs_rx = 0; + mbx->stats.reqs = 0; + mbx->stats.acks = 0; + mbx->stats.rsts = 0; + default: + return E1000_SUCCESS; + } +} + Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mbx.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mbx.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mbx.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mbx.h (revision 291673) @@ -0,0 +1,106 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_MBX_H_ +#define _E1000_MBX_H_ + +#include "e1000_api.h" + +/* Define mailbox register bits */ +#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */ +#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */ +#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ +#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ +#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */ +#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */ +#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */ +#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */ +#define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */ + +#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */ +#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */ +#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ +#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ +#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */ + +#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */ +#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */ +#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */ +#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */ + +#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ + +/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the + * PF. The reverse is TRUE if it is E1000_PF_*. + * Message ACK's are the value or'd with 0xF0000000 + */ +/* Msgs below or'd with this are the ACK */ +#define E1000_VT_MSGTYPE_ACK 0x80000000 +/* Msgs below or'd with this are the NACK */ +#define E1000_VT_MSGTYPE_NACK 0x40000000 +/* Indicates that VF is still clear to send requests */ +#define E1000_VT_MSGTYPE_CTS 0x20000000 +#define E1000_VT_MSGINFO_SHIFT 16 +/* bits 23:16 are used for extra info for certain messages */ +#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT) + +#define E1000_VF_RESET 0x01 /* VF requests reset */ +#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */ +#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */ +#define E1000_VF_SET_MULTICAST_COUNT_MASK (0x1F << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_MULTICAST_OVERFLOW (0x80 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */ +#define E1000_VF_SET_VLAN_ADD (0x01 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_LPE 0x05 /* reqs to set VMOLR.LPE */ +#define E1000_VF_SET_PROMISC 0x06 /* reqs to clear VMOLR.ROPE/MPME*/ +#define E1000_VF_SET_PROMISC_UNICAST (0x01 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT) + +#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */ + +#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ +#define E1000_VF_MBX_INIT_DELAY 500 /* microseconds between retries */ + +s32 e1000_read_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_write_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_read_posted_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_write_posted_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_check_for_msg(struct e1000_hw *, u16); +s32 e1000_check_for_ack(struct e1000_hw *, u16); +s32 e1000_check_for_rst(struct e1000_hw *, u16); +void e1000_init_mbx_ops_generic(struct e1000_hw *hw); +s32 e1000_init_mbx_params_vf(struct e1000_hw *); +s32 e1000_init_mbx_params_pf(struct e1000_hw *); + +#endif /* _E1000_MBX_H_ */ Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_mbx.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_nvm.c =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_nvm.c (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_nvm.c (revision 291673) @@ -0,0 +1,1346 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#include "e1000_api.h" + +static void e1000_reload_nvm_generic(struct e1000_hw *hw); + +/** + * e1000_init_nvm_ops_generic - Initialize NVM function pointers + * @hw: pointer to the HW structure + * + * Setups up the function pointers to no-op functions + **/ +void e1000_init_nvm_ops_generic(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + DEBUGFUNC("e1000_init_nvm_ops_generic"); + + /* Initialize function pointers */ + nvm->ops.init_params = e1000_null_ops_generic; + nvm->ops.acquire = e1000_null_ops_generic; + nvm->ops.read = e1000_null_read_nvm; + nvm->ops.release = e1000_null_nvm_generic; + nvm->ops.reload = e1000_reload_nvm_generic; + nvm->ops.update = e1000_null_ops_generic; + nvm->ops.valid_led_default = e1000_null_led_default; + nvm->ops.validate = e1000_null_ops_generic; + nvm->ops.write = e1000_null_write_nvm; +} + +/** + * e1000_null_nvm_read - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_read_nvm(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, + u16 E1000_UNUSEDARG *c) +{ + DEBUGFUNC("e1000_null_read_nvm"); + return E1000_SUCCESS; +} + +/** + * e1000_null_nvm_generic - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_nvm_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_nvm_generic"); + return; +} + +/** + * e1000_null_led_default - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_led_default(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG *data) +{ + DEBUGFUNC("e1000_null_led_default"); + return E1000_SUCCESS; +} + +/** + * e1000_null_write_nvm - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_write_nvm(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, + u16 E1000_UNUSEDARG *c) +{ + DEBUGFUNC("e1000_null_write_nvm"); + return E1000_SUCCESS; +} + +/** + * e1000_raise_eec_clk - Raise EEPROM clock + * @hw: pointer to the HW structure + * @eecd: pointer to the EEPROM + * + * Enable/Raise the EEPROM clock bit. + **/ +static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) +{ + *eecd = *eecd | E1000_EECD_SK; + E1000_WRITE_REG(hw, E1000_EECD, *eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(hw->nvm.delay_usec); +} + +/** + * e1000_lower_eec_clk - Lower EEPROM clock + * @hw: pointer to the HW structure + * @eecd: pointer to the EEPROM + * + * Clear/Lower the EEPROM clock bit. + **/ +static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) +{ + *eecd = *eecd & ~E1000_EECD_SK; + E1000_WRITE_REG(hw, E1000_EECD, *eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(hw->nvm.delay_usec); +} + +/** + * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM + * @hw: pointer to the HW structure + * @data: data to send to the EEPROM + * @count: number of bits to shift out + * + * We need to shift 'count' bits out to the EEPROM. So, the value in the + * "data" parameter will be shifted out to the EEPROM one bit at a time. + * In order to do this, "data" must be broken down into bits. + **/ +static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + u32 mask; + + DEBUGFUNC("e1000_shift_out_eec_bits"); + + mask = 0x01 << (count - 1); + if (nvm->type == e1000_nvm_eeprom_microwire) + eecd &= ~E1000_EECD_DO; + else + if (nvm->type == e1000_nvm_eeprom_spi) + eecd |= E1000_EECD_DO; + + do { + eecd &= ~E1000_EECD_DI; + + if (data & mask) + eecd |= E1000_EECD_DI; + + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + + usec_delay(nvm->delay_usec); + + e1000_raise_eec_clk(hw, &eecd); + e1000_lower_eec_clk(hw, &eecd); + + mask >>= 1; + } while (mask); + + eecd &= ~E1000_EECD_DI; + E1000_WRITE_REG(hw, E1000_EECD, eecd); +} + +/** + * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM + * @hw: pointer to the HW structure + * @count: number of bits to shift in + * + * In order to read a register from the EEPROM, we need to shift 'count' bits + * in from the EEPROM. Bits are "shifted in" by raising the clock input to + * the EEPROM (setting the SK bit), and then reading the value of the data out + * "DO" bit. During this "shifting in" process the data in "DI" bit should + * always be clear. + **/ +static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count) +{ + u32 eecd; + u32 i; + u16 data; + + DEBUGFUNC("e1000_shift_in_eec_bits"); + + eecd = E1000_READ_REG(hw, E1000_EECD); + + eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); + data = 0; + + for (i = 0; i < count; i++) { + data <<= 1; + e1000_raise_eec_clk(hw, &eecd); + + eecd = E1000_READ_REG(hw, E1000_EECD); + + eecd &= ~E1000_EECD_DI; + if (eecd & E1000_EECD_DO) + data |= 1; + + e1000_lower_eec_clk(hw, &eecd); + } + + return data; +} + +/** + * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion + * @hw: pointer to the HW structure + * @ee_reg: EEPROM flag for polling + * + * Polls the EEPROM status bit for either read or write completion based + * upon the value of 'ee_reg'. + **/ +s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) +{ + u32 attempts = 100000; + u32 i, reg = 0; + + DEBUGFUNC("e1000_poll_eerd_eewr_done"); + + for (i = 0; i < attempts; i++) { + if (ee_reg == E1000_NVM_POLL_READ) + reg = E1000_READ_REG(hw, E1000_EERD); + else + reg = E1000_READ_REG(hw, E1000_EEWR); + + if (reg & E1000_NVM_RW_REG_DONE) + return E1000_SUCCESS; + + usec_delay(5); + } + + return -E1000_ERR_NVM; +} + +/** + * e1000_acquire_nvm_generic - Generic request for access to EEPROM + * @hw: pointer to the HW structure + * + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -E1000_ERR_NVM (-1). + **/ +s32 e1000_acquire_nvm_generic(struct e1000_hw *hw) +{ + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + s32 timeout = E1000_NVM_GRANT_ATTEMPTS; + + DEBUGFUNC("e1000_acquire_nvm_generic"); + + E1000_WRITE_REG(hw, E1000_EECD, eecd | E1000_EECD_REQ); + eecd = E1000_READ_REG(hw, E1000_EECD); + + while (timeout) { + if (eecd & E1000_EECD_GNT) + break; + usec_delay(5); + eecd = E1000_READ_REG(hw, E1000_EECD); + timeout--; + } + + if (!timeout) { + eecd &= ~E1000_EECD_REQ; + E1000_WRITE_REG(hw, E1000_EECD, eecd); + DEBUGOUT("Could not acquire NVM grant\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_standby_nvm - Return EEPROM to standby state + * @hw: pointer to the HW structure + * + * Return the EEPROM to a standby state. + **/ +static void e1000_standby_nvm(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + + DEBUGFUNC("e1000_standby_nvm"); + + if (nvm->type == e1000_nvm_eeprom_microwire) { + eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(nvm->delay_usec); + + e1000_raise_eec_clk(hw, &eecd); + + /* Select EEPROM */ + eecd |= E1000_EECD_CS; + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(nvm->delay_usec); + + e1000_lower_eec_clk(hw, &eecd); + } else if (nvm->type == e1000_nvm_eeprom_spi) { + /* Toggle CS to flush commands */ + eecd |= E1000_EECD_CS; + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(nvm->delay_usec); + eecd &= ~E1000_EECD_CS; + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(nvm->delay_usec); + } +} + +/** + * e1000_stop_nvm - Terminate EEPROM command + * @hw: pointer to the HW structure + * + * Terminates the current command by inverting the EEPROM's chip select pin. + **/ +static void e1000_stop_nvm(struct e1000_hw *hw) +{ + u32 eecd; + + DEBUGFUNC("e1000_stop_nvm"); + + eecd = E1000_READ_REG(hw, E1000_EECD); + if (hw->nvm.type == e1000_nvm_eeprom_spi) { + /* Pull CS high */ + eecd |= E1000_EECD_CS; + e1000_lower_eec_clk(hw, &eecd); + } else if (hw->nvm.type == e1000_nvm_eeprom_microwire) { + /* CS on Microwire is active-high */ + eecd &= ~(E1000_EECD_CS | E1000_EECD_DI); + E1000_WRITE_REG(hw, E1000_EECD, eecd); + e1000_raise_eec_clk(hw, &eecd); + e1000_lower_eec_clk(hw, &eecd); + } +} + +/** + * e1000_release_nvm_generic - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit. + **/ +void e1000_release_nvm_generic(struct e1000_hw *hw) +{ + u32 eecd; + + DEBUGFUNC("e1000_release_nvm_generic"); + + e1000_stop_nvm(hw); + + eecd = E1000_READ_REG(hw, E1000_EECD); + eecd &= ~E1000_EECD_REQ; + E1000_WRITE_REG(hw, E1000_EECD, eecd); +} + +/** + * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write + * @hw: pointer to the HW structure + * + * Setups the EEPROM for reading and writing. + **/ +static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + u8 spi_stat_reg; + + DEBUGFUNC("e1000_ready_nvm_eeprom"); + + if (nvm->type == e1000_nvm_eeprom_microwire) { + /* Clear SK and DI */ + eecd &= ~(E1000_EECD_DI | E1000_EECD_SK); + E1000_WRITE_REG(hw, E1000_EECD, eecd); + /* Set CS */ + eecd |= E1000_EECD_CS; + E1000_WRITE_REG(hw, E1000_EECD, eecd); + } else if (nvm->type == e1000_nvm_eeprom_spi) { + u16 timeout = NVM_MAX_RETRY_SPI; + + /* Clear SK and CS */ + eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(1); + + /* Read "Status Register" repeatedly until the LSB is cleared. + * The EEPROM will signal that the command has been completed + * by clearing bit 0 of the internal status register. If it's + * not cleared within 'timeout', then error out. + */ + while (timeout) { + e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, + hw->nvm.opcode_bits); + spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8); + if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) + break; + + usec_delay(5); + e1000_standby_nvm(hw); + timeout--; + } + + if (!timeout) { + DEBUGOUT("SPI NVM Status error\n"); + return -E1000_ERR_NVM; + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_nvm_spi - Read EEPROM's using SPI + * @hw: pointer to the HW structure + * @offset: offset of word in the EEPROM to read + * @words: number of words to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM. + **/ +s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i = 0; + s32 ret_val; + u16 word_in; + u8 read_opcode = NVM_READ_OPCODE_SPI; + + DEBUGFUNC("e1000_read_nvm_spi"); + + /* A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + ret_val = nvm->ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_ready_nvm_eeprom(hw); + if (ret_val) + goto release; + + e1000_standby_nvm(hw); + + if ((nvm->address_bits == 8) && (offset >= 128)) + read_opcode |= NVM_A8_OPCODE_SPI; + + /* Send the READ command (opcode + addr) */ + e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits); + e1000_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits); + + /* Read the data. SPI NVMs increment the address with each byte + * read and will roll over if reading beyond the end. This allows + * us to read the whole NVM from any offset + */ + for (i = 0; i < words; i++) { + word_in = e1000_shift_in_eec_bits(hw, 16); + data[i] = (word_in >> 8) | (word_in << 8); + } + +release: + nvm->ops.release(hw); + + return ret_val; +} + +/** + * e1000_read_nvm_microwire - Reads EEPROM's using microwire + * @hw: pointer to the HW structure + * @offset: offset of word in the EEPROM to read + * @words: number of words to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM. + **/ +s32 e1000_read_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i = 0; + s32 ret_val; + u8 read_opcode = NVM_READ_OPCODE_MICROWIRE; + + DEBUGFUNC("e1000_read_nvm_microwire"); + + /* A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + ret_val = nvm->ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_ready_nvm_eeprom(hw); + if (ret_val) + goto release; + + for (i = 0; i < words; i++) { + /* Send the READ command (opcode + addr) */ + e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits); + e1000_shift_out_eec_bits(hw, (u16)(offset + i), + nvm->address_bits); + + /* Read the data. For microwire, each word requires the + * overhead of setup and tear-down. + */ + data[i] = e1000_shift_in_eec_bits(hw, 16); + e1000_standby_nvm(hw); + } + +release: + nvm->ops.release(hw); + + return ret_val; +} + +/** + * e1000_read_nvm_eerd - Reads EEPROM using EERD register + * @hw: pointer to the HW structure + * @offset: offset of word in the EEPROM to read + * @words: number of words to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i, eerd = 0; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_read_nvm_eerd"); + + /* A check for invalid values: offset too large, too many words, + * too many words for the offset, and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + for (i = 0; i < words; i++) { + eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + + E1000_NVM_RW_REG_START; + + E1000_WRITE_REG(hw, E1000_EERD, eerd); + ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); + if (ret_val) + break; + + data[i] = (E1000_READ_REG(hw, E1000_EERD) >> + E1000_NVM_RW_REG_DATA); + } + + if (ret_val) + DEBUGOUT1("NVM read error: %d\n", ret_val); + + return ret_val; +} + +/** + * e1000_write_nvm_spi - Write to EEPROM using SPI + * @hw: pointer to the HW structure + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the EEPROM + * + * Writes data to EEPROM at offset using SPI interface. + * + * If e1000_update_nvm_checksum is not called after this function , the + * EEPROM will most likely contain an invalid checksum. + **/ +s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + s32 ret_val = -E1000_ERR_NVM; + u16 widx = 0; + + DEBUGFUNC("e1000_write_nvm_spi"); + + /* A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + while (widx < words) { + u8 write_opcode = NVM_WRITE_OPCODE_SPI; + + ret_val = nvm->ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_ready_nvm_eeprom(hw); + if (ret_val) { + nvm->ops.release(hw); + return ret_val; + } + + e1000_standby_nvm(hw); + + /* Send the WRITE ENABLE command (8 bit opcode) */ + e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, + nvm->opcode_bits); + + e1000_standby_nvm(hw); + + /* Some SPI eeproms use the 8th address bit embedded in the + * opcode + */ + if ((nvm->address_bits == 8) && (offset >= 128)) + write_opcode |= NVM_A8_OPCODE_SPI; + + /* Send the Write command (8-bit opcode + addr) */ + e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); + e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), + nvm->address_bits); + + /* Loop to allow for up to whole page write of eeprom */ + while (widx < words) { + u16 word_out = data[widx]; + word_out = (word_out >> 8) | (word_out << 8); + e1000_shift_out_eec_bits(hw, word_out, 16); + widx++; + + if ((((offset + widx) * 2) % nvm->page_size) == 0) { + e1000_standby_nvm(hw); + break; + } + } + msec_delay(10); + nvm->ops.release(hw); + } + + return ret_val; +} + +/** + * e1000_write_nvm_microwire - Writes EEPROM using microwire + * @hw: pointer to the HW structure + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the EEPROM + * + * Writes data to EEPROM at offset using microwire interface. + * + * If e1000_update_nvm_checksum is not called after this function , the + * EEPROM will most likely contain an invalid checksum. + **/ +s32 e1000_write_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + s32 ret_val; + u32 eecd; + u16 words_written = 0; + u16 widx = 0; + + DEBUGFUNC("e1000_write_nvm_microwire"); + + /* A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + ret_val = nvm->ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_ready_nvm_eeprom(hw); + if (ret_val) + goto release; + + e1000_shift_out_eec_bits(hw, NVM_EWEN_OPCODE_MICROWIRE, + (u16)(nvm->opcode_bits + 2)); + + e1000_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2)); + + e1000_standby_nvm(hw); + + while (words_written < words) { + e1000_shift_out_eec_bits(hw, NVM_WRITE_OPCODE_MICROWIRE, + nvm->opcode_bits); + + e1000_shift_out_eec_bits(hw, (u16)(offset + words_written), + nvm->address_bits); + + e1000_shift_out_eec_bits(hw, data[words_written], 16); + + e1000_standby_nvm(hw); + + for (widx = 0; widx < 200; widx++) { + eecd = E1000_READ_REG(hw, E1000_EECD); + if (eecd & E1000_EECD_DO) + break; + usec_delay(50); + } + + if (widx == 200) { + DEBUGOUT("NVM Write did not complete\n"); + ret_val = -E1000_ERR_NVM; + goto release; + } + + e1000_standby_nvm(hw); + + words_written++; + } + + e1000_shift_out_eec_bits(hw, NVM_EWDS_OPCODE_MICROWIRE, + (u16)(nvm->opcode_bits + 2)); + + e1000_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2)); + +release: + nvm->ops.release(hw); + + return ret_val; +} + +/** + * e1000_read_pba_string_generic - Read device part number + * @hw: pointer to the HW structure + * @pba_num: pointer to device part number + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number from the EEPROM and stores + * the value in pba_num. + **/ +s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, + u32 pba_num_size) +{ + s32 ret_val; + u16 nvm_data; + u16 pba_ptr; + u16 offset; + u16 length; + + DEBUGFUNC("e1000_read_pba_string_generic"); + + if ((hw->mac.type >= e1000_i210) && + !e1000_get_flash_presence_i210(hw)) { + DEBUGOUT("Flashless no PBA string\n"); + return -E1000_ERR_NVM_PBA_SECTION; + } + + if (pba_num == NULL) { + DEBUGOUT("PBA string buffer was null\n"); + return -E1000_ERR_INVALID_ARGUMENT; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + /* if nvm_data is not ptr guard the PBA must be in legacy format which + * means pba_ptr is actually our second data word for the PBA number + * and we can decode it into an ascii string + */ + if (nvm_data != NVM_PBA_PTR_GUARD) { + DEBUGOUT("NVM PBA number is not stored as string\n"); + + /* make sure callers buffer is big enough to store the PBA */ + if (pba_num_size < E1000_PBANUM_LENGTH) { + DEBUGOUT("PBA string buffer too small\n"); + return E1000_ERR_NO_SPACE; + } + + /* extract hex string from data and pba_ptr */ + pba_num[0] = (nvm_data >> 12) & 0xF; + pba_num[1] = (nvm_data >> 8) & 0xF; + pba_num[2] = (nvm_data >> 4) & 0xF; + pba_num[3] = nvm_data & 0xF; + pba_num[4] = (pba_ptr >> 12) & 0xF; + pba_num[5] = (pba_ptr >> 8) & 0xF; + pba_num[6] = '-'; + pba_num[7] = 0; + pba_num[8] = (pba_ptr >> 4) & 0xF; + pba_num[9] = pba_ptr & 0xF; + + /* put a null character on the end of our string */ + pba_num[10] = '\0'; + + /* switch all the data but the '-' to hex char */ + for (offset = 0; offset < 10; offset++) { + if (pba_num[offset] < 0xA) + pba_num[offset] += '0'; + else if (pba_num[offset] < 0x10) + pba_num[offset] += 'A' - 0xA; + } + + return E1000_SUCCESS; + } + + ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (length == 0xFFFF || length == 0) { + DEBUGOUT("NVM PBA number section invalid length\n"); + return -E1000_ERR_NVM_PBA_SECTION; + } + /* check if pba_num buffer is big enough */ + if (pba_num_size < (((u32)length * 2) - 1)) { + DEBUGOUT("PBA string buffer too small\n"); + return -E1000_ERR_NO_SPACE; + } + + /* trim pba length from start of string */ + pba_ptr++; + length--; + + for (offset = 0; offset < length; offset++) { + ret_val = hw->nvm.ops.read(hw, pba_ptr + offset, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + pba_num[offset * 2] = (u8)(nvm_data >> 8); + pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF); + } + pba_num[offset * 2] = '\0'; + + return E1000_SUCCESS; +} + +/** + * e1000_read_pba_length_generic - Read device part number length + * @hw: pointer to the HW structure + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number length from the EEPROM and + * stores the value in pba_num_size. + **/ +s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size) +{ + s32 ret_val; + u16 nvm_data; + u16 pba_ptr; + u16 length; + + DEBUGFUNC("e1000_read_pba_length_generic"); + + if (pba_num_size == NULL) { + DEBUGOUT("PBA buffer size was null\n"); + return -E1000_ERR_INVALID_ARGUMENT; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + /* if data is not ptr guard the PBA must be in legacy format */ + if (nvm_data != NVM_PBA_PTR_GUARD) { + *pba_num_size = E1000_PBANUM_LENGTH; + return E1000_SUCCESS; + } + + ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (length == 0xFFFF || length == 0) { + DEBUGOUT("NVM PBA number section invalid length\n"); + return -E1000_ERR_NVM_PBA_SECTION; + } + + /* Convert from length in u16 values to u8 chars, add 1 for NULL, + * and subtract 2 because length field is included in length. + */ + *pba_num_size = ((u32)length * 2) - 1; + + return E1000_SUCCESS; +} + + +/** + * e1000_read_pba_raw + * @hw: pointer to the HW structure + * @eeprom_buf: optional pointer to EEPROM image + * @eeprom_buf_size: size of EEPROM image in words + * @max_pba_block_size: PBA block size limit + * @pba: pointer to output PBA structure + * + * Reads PBA from EEPROM image when eeprom_buf is not NULL. + * Reads PBA from physical EEPROM device when eeprom_buf is NULL. + * + **/ +s32 e1000_read_pba_raw(struct e1000_hw *hw, u16 *eeprom_buf, + u32 eeprom_buf_size, u16 max_pba_block_size, + struct e1000_pba *pba) +{ + s32 ret_val; + u16 pba_block_size; + + if (pba == NULL) + return -E1000_ERR_PARAM; + + if (eeprom_buf == NULL) { + ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 2, + &pba->word[0]); + if (ret_val) + return ret_val; + } else { + if (eeprom_buf_size > NVM_PBA_OFFSET_1) { + pba->word[0] = eeprom_buf[NVM_PBA_OFFSET_0]; + pba->word[1] = eeprom_buf[NVM_PBA_OFFSET_1]; + } else { + return -E1000_ERR_PARAM; + } + } + + if (pba->word[0] == NVM_PBA_PTR_GUARD) { + if (pba->pba_block == NULL) + return -E1000_ERR_PARAM; + + ret_val = e1000_get_pba_block_size(hw, eeprom_buf, + eeprom_buf_size, + &pba_block_size); + if (ret_val) + return ret_val; + + if (pba_block_size > max_pba_block_size) + return -E1000_ERR_PARAM; + + if (eeprom_buf == NULL) { + ret_val = e1000_read_nvm(hw, pba->word[1], + pba_block_size, + pba->pba_block); + if (ret_val) + return ret_val; + } else { + if (eeprom_buf_size > (u32)(pba->word[1] + + pba_block_size)) { + memcpy(pba->pba_block, + &eeprom_buf[pba->word[1]], + pba_block_size * sizeof(u16)); + } else { + return -E1000_ERR_PARAM; + } + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_write_pba_raw + * @hw: pointer to the HW structure + * @eeprom_buf: optional pointer to EEPROM image + * @eeprom_buf_size: size of EEPROM image in words + * @pba: pointer to PBA structure + * + * Writes PBA to EEPROM image when eeprom_buf is not NULL. + * Writes PBA to physical EEPROM device when eeprom_buf is NULL. + * + **/ +s32 e1000_write_pba_raw(struct e1000_hw *hw, u16 *eeprom_buf, + u32 eeprom_buf_size, struct e1000_pba *pba) +{ + s32 ret_val; + + if (pba == NULL) + return -E1000_ERR_PARAM; + + if (eeprom_buf == NULL) { + ret_val = e1000_write_nvm(hw, NVM_PBA_OFFSET_0, 2, + &pba->word[0]); + if (ret_val) + return ret_val; + } else { + if (eeprom_buf_size > NVM_PBA_OFFSET_1) { + eeprom_buf[NVM_PBA_OFFSET_0] = pba->word[0]; + eeprom_buf[NVM_PBA_OFFSET_1] = pba->word[1]; + } else { + return -E1000_ERR_PARAM; + } + } + + if (pba->word[0] == NVM_PBA_PTR_GUARD) { + if (pba->pba_block == NULL) + return -E1000_ERR_PARAM; + + if (eeprom_buf == NULL) { + ret_val = e1000_write_nvm(hw, pba->word[1], + pba->pba_block[0], + pba->pba_block); + if (ret_val) + return ret_val; + } else { + if (eeprom_buf_size > (u32)(pba->word[1] + + pba->pba_block[0])) { + memcpy(&eeprom_buf[pba->word[1]], + pba->pba_block, + pba->pba_block[0] * sizeof(u16)); + } else { + return -E1000_ERR_PARAM; + } + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_get_pba_block_size + * @hw: pointer to the HW structure + * @eeprom_buf: optional pointer to EEPROM image + * @eeprom_buf_size: size of EEPROM image in words + * @pba_data_size: pointer to output variable + * + * Returns the size of the PBA block in words. Function operates on EEPROM + * image if the eeprom_buf pointer is not NULL otherwise it accesses physical + * EEPROM device. + * + **/ +s32 e1000_get_pba_block_size(struct e1000_hw *hw, u16 *eeprom_buf, + u32 eeprom_buf_size, u16 *pba_block_size) +{ + s32 ret_val; + u16 pba_word[2]; + u16 length; + + DEBUGFUNC("e1000_get_pba_block_size"); + + if (eeprom_buf == NULL) { + ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 2, &pba_word[0]); + if (ret_val) + return ret_val; + } else { + if (eeprom_buf_size > NVM_PBA_OFFSET_1) { + pba_word[0] = eeprom_buf[NVM_PBA_OFFSET_0]; + pba_word[1] = eeprom_buf[NVM_PBA_OFFSET_1]; + } else { + return -E1000_ERR_PARAM; + } + } + + if (pba_word[0] == NVM_PBA_PTR_GUARD) { + if (eeprom_buf == NULL) { + ret_val = e1000_read_nvm(hw, pba_word[1] + 0, 1, + &length); + if (ret_val) + return ret_val; + } else { + if (eeprom_buf_size > pba_word[1]) + length = eeprom_buf[pba_word[1] + 0]; + else + return -E1000_ERR_PARAM; + } + + if (length == 0xFFFF || length == 0) + return -E1000_ERR_NVM_PBA_SECTION; + } else { + /* PBA number in legacy format, there is no PBA Block. */ + length = 0; + } + + if (pba_block_size != NULL) + *pba_block_size = length; + + return E1000_SUCCESS; +} + +/** + * e1000_read_mac_addr_generic - Read device MAC address + * @hw: pointer to the HW structure + * + * Reads the device MAC address from the EEPROM and stores the value. + * Since devices with two ports use the same EEPROM, we increment the + * last bit in the MAC address for the second port. + **/ +s32 e1000_read_mac_addr_generic(struct e1000_hw *hw) +{ + u32 rar_high; + u32 rar_low; + u16 i; + + rar_high = E1000_READ_REG(hw, E1000_RAH(0)); + rar_low = E1000_READ_REG(hw, E1000_RAL(0)); + + for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++) + hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8)); + + for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++) + hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8)); + + for (i = 0; i < ETH_ADDR_LEN; i++) + hw->mac.addr[i] = hw->mac.perm_addr[i]; + + return E1000_SUCCESS; +} + +/** + * e1000_validate_nvm_checksum_generic - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_validate_nvm_checksum_generic"); + + for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + checksum += nvm_data; + } + + if (checksum != (u16) NVM_SUM) { + DEBUGOUT("NVM Checksum Invalid\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_update_nvm_checksum_generic - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. + **/ +s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_update_nvm_checksum"); + + for (i = 0; i < NVM_CHECKSUM_REG; i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error while updating checksum.\n"); + return ret_val; + } + checksum += nvm_data; + } + checksum = (u16) NVM_SUM - checksum; + ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum); + if (ret_val) + DEBUGOUT("NVM Write Error while updating checksum.\n"); + + return ret_val; +} + +/** + * e1000_reload_nvm_generic - Reloads EEPROM + * @hw: pointer to the HW structure + * + * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the + * extended control register. + **/ +static void e1000_reload_nvm_generic(struct e1000_hw *hw) +{ + u32 ctrl_ext; + + DEBUGFUNC("e1000_reload_nvm_generic"); + + usec_delay(10); + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_get_fw_version - Get firmware version information + * @hw: pointer to the HW structure + * @fw_vers: pointer to output version structure + * + * unsupported/not present features return 0 in version structure + **/ +void e1000_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) +{ + u16 eeprom_verh, eeprom_verl, etrack_test, fw_version; + u8 q, hval, rem, result; + u16 comb_verh, comb_verl, comb_offset; + + memset(fw_vers, 0, sizeof(struct e1000_fw_version)); + + /* basic eeprom version numbers, bits used vary by part and by tool + * used to create the nvm images */ + /* Check which data format we have */ + switch (hw->mac.type) { + case e1000_i211: + e1000_read_invm_version(hw, fw_vers); + return; + case e1000_82575: + case e1000_82576: + case e1000_82580: + hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test); + /* Use this format, unless EETRACK ID exists, + * then use alternate format + */ + if ((etrack_test & NVM_MAJOR_MASK) != NVM_ETRACK_VALID) { + hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); + fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) + >> NVM_MAJOR_SHIFT; + fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK) + >> NVM_MINOR_SHIFT; + fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK); + goto etrack_id; + } + break; + case e1000_i210: + if (!(e1000_get_flash_presence_i210(hw))) { + e1000_read_invm_version(hw, fw_vers); + return; + } + /* fall through */ + case e1000_i350: + hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test); + /* find combo image version */ + hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset); + if ((comb_offset != 0x0) && + (comb_offset != NVM_VER_INVALID)) { + + hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset + + 1), 1, &comb_verh); + hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset), + 1, &comb_verl); + + /* get Option Rom version if it exists and is valid */ + if ((comb_verh && comb_verl) && + ((comb_verh != NVM_VER_INVALID) && + (comb_verl != NVM_VER_INVALID))) { + + fw_vers->or_valid = TRUE; + fw_vers->or_major = + comb_verl >> NVM_COMB_VER_SHFT; + fw_vers->or_build = + (comb_verl << NVM_COMB_VER_SHFT) + | (comb_verh >> NVM_COMB_VER_SHFT); + fw_vers->or_patch = + comb_verh & NVM_COMB_VER_MASK; + } + } + break; + default: + hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test); + return; + } + hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); + fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) + >> NVM_MAJOR_SHIFT; + + /* check for old style version format in newer images*/ + if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) { + eeprom_verl = (fw_version & NVM_COMB_VER_MASK); + } else { + eeprom_verl = (fw_version & NVM_MINOR_MASK) + >> NVM_MINOR_SHIFT; + } + /* Convert minor value to hex before assigning to output struct + * Val to be converted will not be higher than 99, per tool output + */ + q = eeprom_verl / NVM_HEX_CONV; + hval = q * NVM_HEX_TENS; + rem = eeprom_verl % NVM_HEX_CONV; + result = hval + rem; + fw_vers->eep_minor = result; + +etrack_id: + if ((etrack_test & NVM_MAJOR_MASK) == NVM_ETRACK_VALID) { + hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl); + hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh); + fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) + | eeprom_verl; + } else if ((etrack_test & NVM_ETRACK_VALID) == 0) { + hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verh); + hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verl); + fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) | + eeprom_verl; + } +} + + Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_nvm.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_nvm.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_nvm.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_nvm.h (revision 291673) @@ -0,0 +1,97 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_NVM_H_ +#define _E1000_NVM_H_ + +struct e1000_pba { + u16 word[2]; + u16 *pba_block; +}; + +struct e1000_fw_version { + u32 etrack_id; + u16 eep_major; + u16 eep_minor; + u16 eep_build; + + u8 invm_major; + u8 invm_minor; + u8 invm_img_type; + + bool or_valid; + u16 or_major; + u16 or_build; + u16 or_patch; +}; + + +void e1000_init_nvm_ops_generic(struct e1000_hw *hw); +s32 e1000_null_read_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c); +void e1000_null_nvm_generic(struct e1000_hw *hw); +s32 e1000_null_led_default(struct e1000_hw *hw, u16 *data); +s32 e1000_null_write_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c); +s32 e1000_acquire_nvm_generic(struct e1000_hw *hw); + +s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg); +s32 e1000_read_mac_addr_generic(struct e1000_hw *hw); +s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, + u32 pba_num_size); +s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size); +s32 e1000_read_pba_raw(struct e1000_hw *hw, u16 *eeprom_buf, + u32 eeprom_buf_size, u16 max_pba_block_size, + struct e1000_pba *pba); +s32 e1000_write_pba_raw(struct e1000_hw *hw, u16 *eeprom_buf, + u32 eeprom_buf_size, struct e1000_pba *pba); +s32 e1000_get_pba_block_size(struct e1000_hw *hw, u16 *eeprom_buf, + u32 eeprom_buf_size, u16 *pba_block_size); +s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000_read_nvm_microwire(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); +s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data); +s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw); +s32 e1000_write_nvm_microwire(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); +s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw); +void e1000_release_nvm_generic(struct e1000_hw *hw); +void e1000_get_fw_version(struct e1000_hw *hw, + struct e1000_fw_version *fw_vers); + +#define E1000_STM_OPCODE 0xDB00 + +#endif Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_nvm.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_osdep.c =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_osdep.c (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_osdep.c (revision 291673) @@ -0,0 +1,81 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#include "e1000_api.h" + +/* + * NOTE: the following routines using the e1000 + * naming style are provided to the shared + * code but are OS specific + */ + +void +e1000_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + pci_write_config(((struct e1000_osdep *)hw->back)->dev, reg, *value, 2); +} + +void +e1000_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + *value = pci_read_config(((struct e1000_osdep *)hw->back)->dev, reg, 2); +} + +/* + * Read the PCI Express capabilities + */ +int32_t +e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + device_t dev = ((struct e1000_osdep *)hw->back)->dev; + u32 offset; + + pci_find_extcap(dev, PCIY_EXPRESS, &offset); + *value = pci_read_config(dev, offset + reg, 2); + return (E1000_SUCCESS); +} + +/* + * Write the PCI Express capabilities + */ +int32_t +e1000_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + device_t dev = ((struct e1000_osdep *)hw->back)->dev; + u32 offset; + + pci_find_extcap(dev, PCIY_EXPRESS, &offset); + pci_write_config(dev, offset + reg, *value, 2); + return (E1000_SUCCESS); +} Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_osdep.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_osdep.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_osdep.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_osdep.h (revision 291673) @@ -0,0 +1,222 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + + +#ifndef _FREEBSD_OS_H_ +#define _FREEBSD_OS_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define ASSERT(x) if(!(x)) panic("EM: x") + +#define usec_delay(x) DELAY(x) +#define usec_delay_irq(x) DELAY(x) +#define msec_delay(x) DELAY(1000*(x)) +#define msec_delay_irq(x) DELAY(1000*(x)) + +#define MSGOUT(S, A, B) printf(S "\n", A, B) +#define DEBUGFUNC(F) DEBUGOUT(F); +#define DEBUGOUT(S) do {} while (0) +#define DEBUGOUT1(S,A) do {} while (0) +#define DEBUGOUT2(S,A,B) do {} while (0) +#define DEBUGOUT3(S,A,B,C) do {} while (0) +#define DEBUGOUT7(S,A,B,C,D,E,F,G) do {} while (0) + +#define STATIC static +#define FALSE 0 +#define TRUE 1 +#ifndef __bool_true_false_are_defined +#define false FALSE +#define true TRUE +#endif +#define CMD_MEM_WRT_INVALIDATE 0x0010 /* BIT_4 */ +#define PCI_COMMAND_REGISTER PCIR_COMMAND +#define I210_LINK_DELAY 1000 + +/* Mutex used in the shared code */ +#define E1000_MUTEX struct mtx +#define E1000_MUTEX_INIT(mutex) mtx_init((mutex), #mutex, \ + MTX_NETWORK_LOCK, \ + MTX_DEF | MTX_DUPOK) +#define E1000_MUTEX_DESTROY(mutex) mtx_destroy(mutex) +#define E1000_MUTEX_LOCK(mutex) mtx_lock(mutex) +#define E1000_MUTEX_TRYLOCK(mutex) mtx_trylock(mutex) +#define E1000_MUTEX_UNLOCK(mutex) mtx_unlock(mutex) + +typedef uint64_t u64; +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; +typedef int64_t s64; +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; +#ifndef __bool_true_false_are_defined +typedef boolean_t bool; +#endif + +#define __le16 u16 +#define __le32 u32 +#define __le64 u64 + +#if __FreeBSD_version < 800000 +#if defined(__i386__) || defined(__amd64__) +#define mb() __asm volatile("mfence" ::: "memory") +#define wmb() __asm volatile("sfence" ::: "memory") +#define rmb() __asm volatile("lfence" ::: "memory") +#else +#define mb() +#define rmb() +#define wmb() +#endif +#endif /*__FreeBSD_version < 800000 */ + +#if defined(__i386__) || defined(__amd64__) +static __inline +void prefetch(void *x) +{ + __asm volatile("prefetcht0 %0" :: "m" (*(unsigned long *)x)); +} +#else +#define prefetch(x) +#endif + +struct e1000_osdep +{ + bus_space_tag_t mem_bus_space_tag; + bus_space_handle_t mem_bus_space_handle; + bus_space_tag_t io_bus_space_tag; + bus_space_handle_t io_bus_space_handle; + bus_space_tag_t flash_bus_space_tag; + bus_space_handle_t flash_bus_space_handle; + struct device *dev; +}; + +#define E1000_REGISTER(hw, reg) reg + +#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, E1000_STATUS) + +/* Read from an absolute offset in the adapter's memory space */ +#define E1000_READ_OFFSET(hw, offset) \ + bus_space_read_4(((struct e1000_osdep *)(hw)->back)->mem_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->mem_bus_space_handle, offset) + +/* Write to an absolute offset in the adapter's memory space */ +#define E1000_WRITE_OFFSET(hw, offset, value) \ + bus_space_write_4(((struct e1000_osdep *)(hw)->back)->mem_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->mem_bus_space_handle, offset, value) + +/* Register READ/WRITE macros */ + +#define E1000_READ_REG(hw, reg) \ + bus_space_read_4(((struct e1000_osdep *)(hw)->back)->mem_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->mem_bus_space_handle, \ + E1000_REGISTER(hw, reg)) + +#define E1000_WRITE_REG(hw, reg, value) \ + bus_space_write_4(((struct e1000_osdep *)(hw)->back)->mem_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->mem_bus_space_handle, \ + E1000_REGISTER(hw, reg), value) + +#define E1000_READ_REG_ARRAY(hw, reg, index) \ + bus_space_read_4(((struct e1000_osdep *)(hw)->back)->mem_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->mem_bus_space_handle, \ + E1000_REGISTER(hw, reg) + ((index)<< 2)) + +#define E1000_WRITE_REG_ARRAY(hw, reg, index, value) \ + bus_space_write_4(((struct e1000_osdep *)(hw)->back)->mem_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->mem_bus_space_handle, \ + E1000_REGISTER(hw, reg) + ((index)<< 2), value) + +#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY +#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY + +#define E1000_READ_REG_ARRAY_BYTE(hw, reg, index) \ + bus_space_read_1(((struct e1000_osdep *)(hw)->back)->mem_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->mem_bus_space_handle, \ + E1000_REGISTER(hw, reg) + index) + +#define E1000_WRITE_REG_ARRAY_BYTE(hw, reg, index, value) \ + bus_space_write_1(((struct e1000_osdep *)(hw)->back)->mem_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->mem_bus_space_handle, \ + E1000_REGISTER(hw, reg) + index, value) + +#define E1000_WRITE_REG_ARRAY_WORD(hw, reg, index, value) \ + bus_space_write_2(((struct e1000_osdep *)(hw)->back)->mem_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->mem_bus_space_handle, \ + E1000_REGISTER(hw, reg) + (index << 1), value) + +#define E1000_WRITE_REG_IO(hw, reg, value) do {\ + bus_space_write_4(((struct e1000_osdep *)(hw)->back)->io_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->io_bus_space_handle, \ + (hw)->io_base, reg); \ + bus_space_write_4(((struct e1000_osdep *)(hw)->back)->io_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->io_bus_space_handle, \ + (hw)->io_base + 4, value); } while (0) + +#define E1000_READ_FLASH_REG(hw, reg) \ + bus_space_read_4(((struct e1000_osdep *)(hw)->back)->flash_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->flash_bus_space_handle, reg) + +#define E1000_READ_FLASH_REG16(hw, reg) \ + bus_space_read_2(((struct e1000_osdep *)(hw)->back)->flash_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->flash_bus_space_handle, reg) + +#define E1000_WRITE_FLASH_REG(hw, reg, value) \ + bus_space_write_4(((struct e1000_osdep *)(hw)->back)->flash_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->flash_bus_space_handle, reg, value) + +#define E1000_WRITE_FLASH_REG16(hw, reg, value) \ + bus_space_write_2(((struct e1000_osdep *)(hw)->back)->flash_bus_space_tag, \ + ((struct e1000_osdep *)(hw)->back)->flash_bus_space_handle, reg, value) + +#endif /* _FREEBSD_OS_H_ */ + Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_osdep.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_phy.c =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_phy.c (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_phy.c (revision 291673) @@ -0,0 +1,3402 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#include "e1000_api.h" + +static s32 e1000_wait_autoneg(struct e1000_hw *hw); +/* Cable length tables */ +static const u16 e1000_m88_cable_length_table[] = { + 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; +#define M88E1000_CABLE_LENGTH_TABLE_SIZE \ + (sizeof(e1000_m88_cable_length_table) / \ + sizeof(e1000_m88_cable_length_table[0])) + +static const u16 e1000_igp_2_cable_length_table[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, + 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22, + 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40, + 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61, + 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82, + 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95, + 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, + 124}; +#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ + (sizeof(e1000_igp_2_cable_length_table) / \ + sizeof(e1000_igp_2_cable_length_table[0])) + +/** + * e1000_init_phy_ops_generic - Initialize PHY function pointers + * @hw: pointer to the HW structure + * + * Setups up the function pointers to no-op functions + **/ +void e1000_init_phy_ops_generic(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + DEBUGFUNC("e1000_init_phy_ops_generic"); + + /* Initialize function pointers */ + phy->ops.init_params = e1000_null_ops_generic; + phy->ops.acquire = e1000_null_ops_generic; + phy->ops.check_polarity = e1000_null_ops_generic; + phy->ops.check_reset_block = e1000_null_ops_generic; + phy->ops.commit = e1000_null_ops_generic; + phy->ops.force_speed_duplex = e1000_null_ops_generic; + phy->ops.get_cfg_done = e1000_null_ops_generic; + phy->ops.get_cable_length = e1000_null_ops_generic; + phy->ops.get_info = e1000_null_ops_generic; + phy->ops.set_page = e1000_null_set_page; + phy->ops.read_reg = e1000_null_read_reg; + phy->ops.read_reg_locked = e1000_null_read_reg; + phy->ops.read_reg_page = e1000_null_read_reg; + phy->ops.release = e1000_null_phy_generic; + phy->ops.reset = e1000_null_ops_generic; + phy->ops.set_d0_lplu_state = e1000_null_lplu_state; + phy->ops.set_d3_lplu_state = e1000_null_lplu_state; + phy->ops.write_reg = e1000_null_write_reg; + phy->ops.write_reg_locked = e1000_null_write_reg; + phy->ops.write_reg_page = e1000_null_write_reg; + phy->ops.power_up = e1000_null_phy_generic; + phy->ops.power_down = e1000_null_phy_generic; + phy->ops.read_i2c_byte = e1000_read_i2c_byte_null; + phy->ops.write_i2c_byte = e1000_write_i2c_byte_null; +} + +/** + * e1000_null_set_page - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_set_page(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG data) +{ + DEBUGFUNC("e1000_null_set_page"); + return E1000_SUCCESS; +} + +/** + * e1000_null_read_reg - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_read_reg(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG *data) +{ + DEBUGFUNC("e1000_null_read_reg"); + return E1000_SUCCESS; +} + +/** + * e1000_null_phy_generic - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_phy_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_phy_generic"); + return; +} + +/** + * e1000_null_lplu_state - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_lplu_state(struct e1000_hw E1000_UNUSEDARG *hw, + bool E1000_UNUSEDARG active) +{ + DEBUGFUNC("e1000_null_lplu_state"); + return E1000_SUCCESS; +} + +/** + * e1000_null_write_reg - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_write_reg(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG data) +{ + DEBUGFUNC("e1000_null_write_reg"); + return E1000_SUCCESS; +} + +/** + * e1000_read_i2c_byte_null - No-op function, return 0 + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: data value read + * + **/ +s32 e1000_read_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG byte_offset, + u8 E1000_UNUSEDARG dev_addr, + u8 E1000_UNUSEDARG *data) +{ + DEBUGFUNC("e1000_read_i2c_byte_null"); + return E1000_SUCCESS; +} + +/** + * e1000_write_i2c_byte_null - No-op function, return 0 + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: data value to write + * + **/ +s32 e1000_write_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG byte_offset, + u8 E1000_UNUSEDARG dev_addr, + u8 E1000_UNUSEDARG data) +{ + DEBUGFUNC("e1000_write_i2c_byte_null"); + return E1000_SUCCESS; +} + +/** + * e1000_check_reset_block_generic - Check if PHY reset is blocked + * @hw: pointer to the HW structure + * + * Read the PHY management control register and check whether a PHY reset + * is blocked. If a reset is not blocked return E1000_SUCCESS, otherwise + * return E1000_BLK_PHY_RESET (12). + **/ +s32 e1000_check_reset_block_generic(struct e1000_hw *hw) +{ + u32 manc; + + DEBUGFUNC("e1000_check_reset_block"); + + manc = E1000_READ_REG(hw, E1000_MANC); + + return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? + E1000_BLK_PHY_RESET : E1000_SUCCESS; +} + +/** + * e1000_get_phy_id - Retrieve the PHY ID and revision + * @hw: pointer to the HW structure + * + * Reads the PHY registers and stores the PHY ID and possibly the PHY + * revision in the hardware structure. + **/ +s32 e1000_get_phy_id(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_id; + + DEBUGFUNC("e1000_get_phy_id"); + + if (!phy->ops.read_reg) + return E1000_SUCCESS; + + ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id); + if (ret_val) + return ret_val; + + phy->id = (u32)(phy_id << 16); + usec_delay(20); + ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id); + if (ret_val) + return ret_val; + + phy->id |= (u32)(phy_id & PHY_REVISION_MASK); + phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); + + + return E1000_SUCCESS; +} + +/** + * e1000_phy_reset_dsp_generic - Reset PHY DSP + * @hw: pointer to the HW structure + * + * Reset the digital signal processor. + **/ +s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_phy_reset_dsp_generic"); + + if (!hw->phy.ops.write_reg) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1); + if (ret_val) + return ret_val; + + return hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0); +} + +/** + * e1000_read_phy_reg_mdic - Read MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the MDI control register in the PHY at offset and stores the + * information read to data. + **/ +s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, mdic = 0; + + DEBUGFUNC("e1000_read_phy_reg_mdic"); + + if (offset > MAX_PHY_REG_ADDRESS) { + DEBUGOUT1("PHY Address %d is out of range\n", offset); + return -E1000_ERR_PARAM; + } + + /* Set up Op-code, Phy Address, and register offset in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + mdic = ((offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_READ)); + + E1000_WRITE_REG(hw, E1000_MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { + usec_delay_irq(50); + mdic = E1000_READ_REG(hw, E1000_MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + DEBUGOUT("MDI Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (mdic & E1000_MDIC_ERROR) { + DEBUGOUT("MDI Error\n"); + return -E1000_ERR_PHY; + } + if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { + DEBUGOUT2("MDI Read offset error - requested %d, returned %d\n", + offset, + (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); + return -E1000_ERR_PHY; + } + *data = (u16) mdic; + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_mdic - Write MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write to register at offset + * + * Writes data to MDI control register in the PHY at offset. + **/ +s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, mdic = 0; + + DEBUGFUNC("e1000_write_phy_reg_mdic"); + + if (offset > MAX_PHY_REG_ADDRESS) { + DEBUGOUT1("PHY Address %d is out of range\n", offset); + return -E1000_ERR_PARAM; + } + + /* Set up Op-code, Phy Address, and register offset in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + mdic = (((u32)data) | + (offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_WRITE)); + + E1000_WRITE_REG(hw, E1000_MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { + usec_delay_irq(50); + mdic = E1000_READ_REG(hw, E1000_MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + DEBUGOUT("MDI Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (mdic & E1000_MDIC_ERROR) { + DEBUGOUT("MDI Error\n"); + return -E1000_ERR_PHY; + } + if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { + DEBUGOUT2("MDI Write offset error - requested %d, returned %d\n", + offset, + (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); + return -E1000_ERR_PHY; + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_phy_reg_i2c - Read PHY register using i2c + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the i2c interface and stores the + * retrieved information in data. + **/ +s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, i2ccmd = 0; + + DEBUGFUNC("e1000_read_phy_reg_i2c"); + + /* Set up Op-code, Phy Address, and register address in the I2CCMD + * register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + (E1000_I2CCMD_OPCODE_READ)); + + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) + break; + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + + /* Need to byte-swap the 16-bit value. */ + *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00); + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_i2c - Write PHY register using i2c + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset using the i2c interface. + **/ +s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, i2ccmd = 0; + u16 phy_data_swapped; + + DEBUGFUNC("e1000_write_phy_reg_i2c"); + + /* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/ + if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) { + DEBUGOUT1("PHY I2C Address %d is out of range.\n", + hw->phy.addr); + return -E1000_ERR_CONFIG; + } + + /* Swap the data bytes for the I2C interface */ + phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00); + + /* Set up Op-code, Phy Address, and register address in the I2CCMD + * register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | + phy_data_swapped); + + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) + break; + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_sfp_data_byte - Reads SFP module data. + * @hw: pointer to the HW structure + * @offset: byte location offset to be read + * @data: read data buffer pointer + * + * Reads one byte from SFP module data stored + * in SFP resided EEPROM memory or SFP diagnostic area. + * Function should be called with + * E1000_I2CCMD_SFP_DATA_ADDR() for SFP module database access + * E1000_I2CCMD_SFP_DIAG_ADDR() for SFP diagnostics parameters + * access + **/ +s32 e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data) +{ + u32 i = 0; + u32 i2ccmd = 0; + u32 data_local = 0; + + DEBUGFUNC("e1000_read_sfp_data_byte"); + + if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) { + DEBUGOUT("I2CCMD command address exceeds upper limit\n"); + return -E1000_ERR_PHY; + } + + /* Set up Op-code, EEPROM Address,in the I2CCMD + * register. The MAC will take care of interfacing with the + * EEPROM to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_READ); + + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + data_local = E1000_READ_REG(hw, E1000_I2CCMD); + if (data_local & E1000_I2CCMD_READY) + break; + } + if (!(data_local & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (data_local & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + *data = (u8) data_local & 0xFF; + + return E1000_SUCCESS; +} + +/** + * e1000_write_sfp_data_byte - Writes SFP module data. + * @hw: pointer to the HW structure + * @offset: byte location offset to write to + * @data: data to write + * + * Writes one byte to SFP module data stored + * in SFP resided EEPROM memory or SFP diagnostic area. + * Function should be called with + * E1000_I2CCMD_SFP_DATA_ADDR() for SFP module database access + * E1000_I2CCMD_SFP_DIAG_ADDR() for SFP diagnostics parameters + * access + **/ +s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data) +{ + u32 i = 0; + u32 i2ccmd = 0; + u32 data_local = 0; + + DEBUGFUNC("e1000_write_sfp_data_byte"); + + if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) { + DEBUGOUT("I2CCMD command address exceeds upper limit\n"); + return -E1000_ERR_PHY; + } + /* The programming interface is 16 bits wide + * so we need to read the whole word first + * then update appropriate byte lane and write + * the updated word back. + */ + /* Set up Op-code, EEPROM Address,in the I2CCMD + * register. The MAC will take care of interfacing + * with an EEPROM to write the data given. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_READ); + /* Set a command to read single word */ + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + /* Poll the ready bit to see if lastly + * launched I2C operation completed + */ + i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) { + /* Check if this is READ or WRITE phase */ + if ((i2ccmd & E1000_I2CCMD_OPCODE_READ) == + E1000_I2CCMD_OPCODE_READ) { + /* Write the selected byte + * lane and update whole word + */ + data_local = i2ccmd & 0xFF00; + data_local |= data; + i2ccmd = ((offset << + E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | data_local); + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + } else { + break; + } + } + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + return E1000_SUCCESS; +} + +/** + * e1000_read_phy_reg_m88 - Read m88 PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore, if necessary, then reads the PHY register at offset + * and storing the retrieved information in data. Release any acquired + * semaphores before exiting. + **/ +s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_read_phy_reg_m88"); + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); + + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_write_phy_reg_m88 - Write m88 PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_write_phy_reg_m88"); + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); + + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_set_page_igp - Set page as on IGP-like PHY(s) + * @hw: pointer to the HW structure + * @page: page to set (shifted left when necessary) + * + * Sets PHY page required for PHY register access. Assumes semaphore is + * already acquired. Note, this function sets phy.addr to 1 so the caller + * must set it appropriately (if necessary) after this function returns. + **/ +s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page) +{ + DEBUGFUNC("e1000_set_page_igp"); + + DEBUGOUT1("Setting page 0x%x\n", page); + + hw->phy.addr = 1; + + return e1000_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page); +} + +/** + * __e1000_read_phy_reg_igp - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary, then reads the PHY register at offset + * and stores the retrieved information in data. Release any acquired + * semaphores before exiting. + **/ +static s32 __e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("__e1000_read_phy_reg_igp"); + + if (!locked) { + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + if (offset > MAX_PHY_MULTI_PAGE_REG) + ret_val = e1000_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); + if (!ret_val) + ret_val = e1000_read_phy_reg_mdic(hw, + MAX_PHY_REG_ADDRESS & offset, + data); + if (!locked) + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_read_phy_reg_igp - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores the + * retrieved information in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_igp(hw, offset, data, FALSE); +} + +/** + * e1000_read_phy_reg_igp_locked - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_igp(hw, offset, data, TRUE); +} + +/** + * e1000_write_phy_reg_igp - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +static s32 __e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_write_phy_reg_igp"); + + if (!locked) { + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + if (offset > MAX_PHY_MULTI_PAGE_REG) + ret_val = e1000_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); + if (!ret_val) + ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & + offset, + data); + if (!locked) + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_write_phy_reg_igp - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_igp(hw, offset, data, FALSE); +} + +/** + * e1000_write_phy_reg_igp_locked - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. + * Assumes semaphore already acquired. + **/ +s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_igp(hw, offset, data, TRUE); +} + +/** + * __e1000_read_kmrn_reg - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary. Then reads the PHY register at offset + * using the kumeran interface. The information retrieved is stored in data. + * Release any acquired semaphores before exiting. + **/ +static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) +{ + u32 kmrnctrlsta; + + DEBUGFUNC("__e1000_read_kmrn_reg"); + + if (!locked) { + s32 ret_val = E1000_SUCCESS; + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & + E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; + E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); + E1000_WRITE_FLUSH(hw); + + usec_delay(2); + + kmrnctrlsta = E1000_READ_REG(hw, E1000_KMRNCTRLSTA); + *data = (u16)kmrnctrlsta; + + if (!locked) + hw->phy.ops.release(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_read_kmrn_reg_generic - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset using the + * kumeran interface. The information retrieved is stored in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, FALSE); +} + +/** + * e1000_read_kmrn_reg_locked - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the kumeran interface. The + * information retrieved is stored in data. + * Assumes semaphore already acquired. + **/ +s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, TRUE); +} + +/** + * __e1000_write_kmrn_reg - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary. Then write the data to PHY register + * at the offset using the kumeran interface. Release any acquired semaphores + * before exiting. + **/ +static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) +{ + u32 kmrnctrlsta; + + DEBUGFUNC("e1000_write_kmrn_reg_generic"); + + if (!locked) { + s32 ret_val = E1000_SUCCESS; + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & + E1000_KMRNCTRLSTA_OFFSET) | data; + E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); + E1000_WRITE_FLUSH(hw); + + usec_delay(2); + + if (!locked) + hw->phy.ops.release(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_write_kmrn_reg_generic - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to the PHY register at the offset + * using the kumeran interface. Release the acquired semaphore before exiting. + **/ +s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, FALSE); +} + +/** + * e1000_write_kmrn_reg_locked - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Write the data to PHY register at the offset using the kumeran interface. + * Assumes semaphore already acquired. + **/ +s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, TRUE); +} + +/** + * e1000_set_master_slave_mode - Setup PHY for Master/slave mode + * @hw: pointer to the HW structure + * + * Sets up Master/slave mode + **/ +static s32 e1000_set_master_slave_mode(struct e1000_hw *hw) +{ + s32 ret_val; + u16 phy_data; + + /* Resolve Master/Slave mode */ + ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* load defaults for future use */ + hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ? + ((phy_data & CR_1000T_MS_VALUE) ? + e1000_ms_force_master : + e1000_ms_force_slave) : e1000_ms_auto; + + switch (hw->phy.ms_type) { + case e1000_ms_force_master: + phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + break; + case e1000_ms_force_slave: + phy_data |= CR_1000T_MS_ENABLE; + phy_data &= ~(CR_1000T_MS_VALUE); + break; + case e1000_ms_auto: + phy_data &= ~CR_1000T_MS_ENABLE; + /* fall-through */ + default: + break; + } + + return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data); +} + +/** + * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link + * @hw: pointer to the HW structure + * + * Sets up Carrier-sense on Transmit and downshift values. + **/ +s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) +{ + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_setup_82577"); + + if (hw->phy.type == e1000_phy_82580) { + ret_val = hw->phy.ops.reset(hw); + if (ret_val) { + DEBUGOUT("Error resetting the PHY.\n"); + return ret_val; + } + } + + /* Enable CRS on Tx. This must be set for half-duplex operation. */ + ret_val = hw->phy.ops.read_reg(hw, I82577_CFG_REG, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= I82577_CFG_ASSERT_CRS_ON_TX; + + /* Enable downshift */ + phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; + + ret_val = hw->phy.ops.write_reg(hw, I82577_CFG_REG, phy_data); + if (ret_val) + return ret_val; + + /* Set MDI/MDIX mode */ + ret_val = hw->phy.ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data); + if (ret_val) + return ret_val; + phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK; + /* Options: + * 0 - Auto (default) + * 1 - MDI mode + * 2 - MDI-X mode + */ + switch (hw->phy.mdix) { + case 1: + break; + case 2: + phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX; + break; + case 0: + default: + phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX; + break; + } + ret_val = hw->phy.ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data); + if (ret_val) + return ret_val; + + return e1000_set_master_slave_mode(hw); +} + +/** + * e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock + * and downshift values are set also. + **/ +s32 e1000_copper_link_setup_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_setup_m88"); + + + /* Enable CRS on Tx. This must be set for half-duplex operation. */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + + /* Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (phy->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if (phy->disable_polarity_correction) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + if (phy->revision < E1000_REVISION_4) { + /* Force TX_CLK in the Extended PHY Specific Control Register + * to 25MHz clock. + */ + ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + + if ((phy->revision == E1000_REVISION_2) && + (phy->id == M88E1111_I_PHY_ID)) { + /* 82573L PHY - set the downshift counter to 5x. */ + phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK; + phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X; + } else { + /* Configure Master and Slave downshift values */ + phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); + phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); + } + ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } + + /* Commit the changes. */ + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + + return E1000_SUCCESS; +} + +/** + * e1000_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's. + * Also enables and sets the downshift parameters. + **/ +s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_setup_m88_gen2"); + + + /* Enable CRS on Tx. This must be set for half-duplex operation. */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (phy->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + /* M88E1112 does not support this mode) */ + if (phy->id != M88E1112_E_PHY_ID) { + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + } + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if (phy->disable_polarity_correction) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + + /* Enable downshift and setting it to X6 */ + if (phy->id == M88E1543_E_PHY_ID) { + phy_data &= ~I347AT4_PSCR_DOWNSHIFT_ENABLE; + ret_val = + phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + } + + phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK; + phy_data |= I347AT4_PSCR_DOWNSHIFT_6X; + phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE; + + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + /* Commit the changes. */ + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + + ret_val = e1000_set_master_slave_mode(hw); + if (ret_val) + return ret_val; + + return E1000_SUCCESS; +} + +/** + * e1000_copper_link_setup_igp - Setup igp PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for + * igp PHY's. + **/ +s32 e1000_copper_link_setup_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_copper_link_setup_igp"); + + + ret_val = hw->phy.ops.reset(hw); + if (ret_val) { + DEBUGOUT("Error resetting the PHY.\n"); + return ret_val; + } + + /* Wait 100ms for MAC to configure PHY from NVM settings, to avoid + * timeout issues when LFS is enabled. + */ + msec_delay(100); + + /* disable lplu d0 during driver init */ + if (hw->phy.ops.set_d0_lplu_state) { + ret_val = hw->phy.ops.set_d0_lplu_state(hw, FALSE); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D0\n"); + return ret_val; + } + } + /* Configure mdi-mdix settings */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCR_AUTO_MDIX; + + switch (phy->mdix) { + case 1: + data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 2: + data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 0: + default: + data |= IGP01E1000_PSCR_AUTO_MDIX; + break; + } + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data); + if (ret_val) + return ret_val; + + /* set auto-master slave resolution settings */ + if (hw->mac.autoneg) { + /* when autonegotiation advertisement is only 1000Mbps then we + * should disable SmartSpeed and enable Auto MasterSlave + * resolution as hardware default. + */ + if (phy->autoneg_advertised == ADVERTISE_1000_FULL) { + /* Disable SmartSpeed */ + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + + /* Set auto Master/Slave resolution process */ + ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data); + if (ret_val) + return ret_val; + + data &= ~CR_1000T_MS_ENABLE; + ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data); + if (ret_val) + return ret_val; + } + + ret_val = e1000_set_master_slave_mode(hw); + } + + return ret_val; +} + +/** + * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation + * @hw: pointer to the HW structure + * + * Reads the MII auto-neg advertisement register and/or the 1000T control + * register and if the PHY is already setup for auto-negotiation, then + * return successful. Otherwise, setup advertisement and flow control to + * the appropriate values for the wanted auto-negotiation. + **/ +#if !defined(NO_82543_SUPPORT) || defined(QV_RELEASE) || defined(ULP_IN_D0_SUPPORT) +s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) +#else +static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) +#endif +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg = 0; + + DEBUGFUNC("e1000_phy_setup_autoneg"); + + phy->autoneg_advertised &= phy->autoneg_mask; + + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + if (phy->autoneg_mask & ADVERTISE_1000_FULL) { + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, + &mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + } + + /* Need to parse both autoneg_advertised and fc and set up + * the appropriate PHY registers. First we will parse for + * autoneg_advertised software override. Since we can advertise + * a plethora of combinations, we need to check each bit + * individually. + */ + + /* First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | + NWAY_AR_100TX_HD_CAPS | + NWAY_AR_10T_FD_CAPS | + NWAY_AR_10T_HD_CAPS); + mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); + + DEBUGOUT1("autoneg_advertised %x\n", phy->autoneg_advertised); + + /* Do we want to advertise 10 Mb Half Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_10_HALF) { + DEBUGOUT("Advertise 10mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; + } + + /* Do we want to advertise 10 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_10_FULL) { + DEBUGOUT("Advertise 10mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; + } + + /* Do we want to advertise 100 Mb Half Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_100_HALF) { + DEBUGOUT("Advertise 100mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; + } + + /* Do we want to advertise 100 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_100_FULL) { + DEBUGOUT("Advertise 100mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; + } + + /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ + if (phy->autoneg_advertised & ADVERTISE_1000_HALF) + DEBUGOUT("Advertise 1000mb Half duplex request denied!\n"); + + /* Do we want to advertise 1000 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { + DEBUGOUT("Advertise 1000mb Full duplex\n"); + mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; + } + + /* Check for a software override of the flow control settings, and + * setup the PHY advertisement registers accordingly. If + * auto-negotiation is enabled, then software will have to set the + * "PAUSE" bits to the correct value in the Auto-Negotiation + * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto- + * negotiation. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * but we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: No software override. The flow control configuration + * in the EEPROM is used. + */ + switch (hw->fc.current_mode) { + case e1000_fc_none: + /* Flow control (Rx & Tx) is completely disabled by a + * software over-ride. + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case e1000_fc_rx_pause: + /* Rx Flow control is enabled, and Tx Flow control is + * disabled, by a software over-ride. + * + * Since there really isn't a way to advertise that we are + * capable of Rx Pause ONLY, we will advertise that we + * support both symmetric and asymmetric Rx PAUSE. Later + * (in e1000_config_fc_after_link_up) we will disable the + * hw's ability to send PAUSE frames. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case e1000_fc_tx_pause: + /* Tx Flow control is enabled, and Rx Flow control is + * disabled, by a software over-ride. + */ + mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; + mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; + break; + case e1000_fc_full: + /* Flow control (both Rx and Tx) is enabled by a software + * over-ride. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); + + if (phy->autoneg_mask & ADVERTISE_1000_FULL) + ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, + mii_1000t_ctrl_reg); + + return ret_val; +} + +/** + * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link + * @hw: pointer to the HW structure + * + * Performs initial bounds checking on autoneg advertisement parameter, then + * configure to advertise the full capability. Setup the PHY to autoneg + * and restart the negotiation process between the link partner. If + * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. + **/ +static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_ctrl; + + DEBUGFUNC("e1000_copper_link_autoneg"); + + /* Perform some bounds checking on the autoneg advertisement + * parameter. + */ + phy->autoneg_advertised &= phy->autoneg_mask; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if (!phy->autoneg_advertised) + phy->autoneg_advertised = phy->autoneg_mask; + + DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); + ret_val = e1000_phy_setup_autoneg(hw); + if (ret_val) { + DEBUGOUT("Error Setting up Auto-Negotiation\n"); + return ret_val; + } + DEBUGOUT("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + return ret_val; + + phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + return ret_val; + + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if (phy->autoneg_wait_to_complete) { + ret_val = e1000_wait_autoneg(hw); + if (ret_val) { + DEBUGOUT("Error while waiting for autoneg to complete\n"); + return ret_val; + } + } + + hw->mac.get_link_status = TRUE; + + return ret_val; +} + +/** + * e1000_setup_copper_link_generic - Configure copper link settings + * @hw: pointer to the HW structure + * + * Calls the appropriate function to configure the link for auto-neg or forced + * speed and duplex. Then we check for link, once link is established calls + * to configure collision distance and flow control are called. If link is + * not established, we return -E1000_ERR_PHY (-2). + **/ +s32 e1000_setup_copper_link_generic(struct e1000_hw *hw) +{ + s32 ret_val; + bool link; + + DEBUGFUNC("e1000_setup_copper_link_generic"); + + if (hw->mac.autoneg) { + /* Setup autoneg and flow control advertisement and perform + * autonegotiation. + */ + ret_val = e1000_copper_link_autoneg(hw); + if (ret_val) + return ret_val; + } else { + /* PHY will be set to 10H, 10F, 100H or 100F + * depending on user settings. + */ + DEBUGOUT("Forcing Speed and Duplex\n"); + ret_val = hw->phy.ops.force_speed_duplex(hw); + if (ret_val) { + DEBUGOUT("Error Forcing Speed and Duplex\n"); + return ret_val; + } + } + + /* Check link status. Wait up to 100 microseconds for link to become + * valid. + */ + ret_val = e1000_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10, + &link); + if (ret_val) + return ret_val; + + if (link) { + DEBUGOUT("Valid link established!!!\n"); + hw->mac.ops.config_collision_dist(hw); + ret_val = e1000_config_fc_after_link_up_generic(hw); + } else { + DEBUGOUT("Unable to establish link!!!\n"); + } + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. Clears the + * auto-crossover to force MDI manually. Waits for link and returns + * successful if link up is successful, else -E1000_ERR_PHY (-2). + **/ +s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_igp"); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &phy_data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + return ret_val; + + /* Clear Auto-Crossover to force MDI manually. IGP requires MDI + * forced whenever speed and duplex are forced. + */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; + phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); + if (ret_val) + return ret_val; + + DEBUGOUT1("IGP PSCR: %X\n", phy_data); + + usec_delay(1); + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on IGP phy.\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) + DEBUGOUT("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + } + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. Clears the + * auto-crossover to force MDI manually. Resets the PHY to commit the + * changes. If time expires while waiting for link up, we reset the DSP. + * After reset, TX_CLK and CRS on Tx must be set. Return successful upon + * successful completion, else return corresponding error code. + **/ +s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_m88"); + + /* I210 and I211 devices support Auto-Crossover in forced operation. */ + if (phy->type != e1000_phy_i210) { + /* Clear Auto-Crossover to force MDI manually. M88E1000 + * requires MDI forced whenever speed and duplex are forced. + */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } + + DEBUGOUT1("M88E1000 PSCR: %X\n", phy_data); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &phy_data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + return ret_val; + + /* Reset the phy to commit changes. */ + ret_val = hw->phy.ops.commit(hw); + if (ret_val) + return ret_val; + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on M88 phy.\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) { + bool reset_dsp = TRUE; + + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: + case I210_I_PHY_ID: + reset_dsp = FALSE; + break; + default: + if (hw->phy.type != e1000_phy_m88) + reset_dsp = FALSE; + break; + } + + if (!reset_dsp) { + DEBUGOUT("Link taking longer than expected.\n"); + } else { + /* We didn't get link. + * Reset the DSP and cross our fingers. + */ + ret_val = phy->ops.write_reg(hw, + M88E1000_PHY_PAGE_SELECT, + 0x001d); + if (ret_val) + return ret_val; + ret_val = e1000_phy_reset_dsp_generic(hw); + if (ret_val) + return ret_val; + } + } + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + } + + if (hw->phy.type != e1000_phy_m88) + return E1000_SUCCESS; + + if (hw->phy.id == I347AT4_E_PHY_ID || + hw->phy.id == M88E1340M_E_PHY_ID || + hw->phy.id == M88E1112_E_PHY_ID) + return E1000_SUCCESS; + if (hw->phy.id == I210_I_PHY_ID) + return E1000_SUCCESS; + if ((hw->phy.id == M88E1543_E_PHY_ID) || + (hw->phy.id == M88E1512_E_PHY_ID)) + return E1000_SUCCESS; + ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* Resetting the phy means we need to re-force TX_CLK in the + * Extended PHY Specific Control Register to 25MHz clock from + * the reset value of 2.5MHz. + */ + phy_data |= M88E1000_EPSCR_TX_CLK_25; + ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + /* In addition, we must re-enable CRS on Tx for both half and full + * duplex. + */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex + * @hw: pointer to the HW structure + * + * Forces the speed and duplex settings of the PHY. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_ife"); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, data); + if (ret_val) + return ret_val; + + /* Disable MDI-X support for 10/100 */ + ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data); + if (ret_val) + return ret_val; + + data &= ~IFE_PMC_AUTO_MDIX; + data &= ~IFE_PMC_FORCE_MDIX; + + ret_val = phy->ops.write_reg(hw, IFE_PHY_MDIX_CONTROL, data); + if (ret_val) + return ret_val; + + DEBUGOUT1("IFE PMC: %X\n", data); + + usec_delay(1); + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on IFE phy.\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) + DEBUGOUT("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + } + + return E1000_SUCCESS; +} + +/** + * e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex + * @hw: pointer to the HW structure + * @phy_ctrl: pointer to current value of PHY_CONTROL + * + * Forces speed and duplex on the PHY by doing the following: disable flow + * control, force speed/duplex on the MAC, disable auto speed detection, + * disable auto-negotiation, configure duplex, configure speed, configure + * the collision distance, write configuration to CTRL register. The + * caller must write to the PHY_CONTROL register for these settings to + * take affect. + **/ +void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 ctrl; + + DEBUGFUNC("e1000_phy_force_speed_duplex_setup"); + + /* Turn off flow control when forcing speed/duplex */ + hw->fc.current_mode = e1000_fc_none; + + /* Force speed/duplex on the mac */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ctrl &= ~E1000_CTRL_SPD_SEL; + + /* Disable Auto Speed Detection */ + ctrl &= ~E1000_CTRL_ASDE; + + /* Disable autoneg on the phy */ + *phy_ctrl &= ~MII_CR_AUTO_NEG_EN; + + /* Forcing Full or Half Duplex? */ + if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { + ctrl &= ~E1000_CTRL_FD; + *phy_ctrl &= ~MII_CR_FULL_DUPLEX; + DEBUGOUT("Half Duplex\n"); + } else { + ctrl |= E1000_CTRL_FD; + *phy_ctrl |= MII_CR_FULL_DUPLEX; + DEBUGOUT("Full Duplex\n"); + } + + /* Forcing 10mb or 100mb? */ + if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) { + ctrl |= E1000_CTRL_SPD_100; + *phy_ctrl |= MII_CR_SPEED_100; + *phy_ctrl &= ~MII_CR_SPEED_1000; + DEBUGOUT("Forcing 100mb\n"); + } else { + ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); + *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); + DEBUGOUT("Forcing 10mb\n"); + } + + hw->mac.ops.config_collision_dist(hw); + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); +} + +/** + * e1000_set_d3_lplu_state_generic - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D3 + * and SmartSpeed is disabled when active is TRUE, else clear lplu for D3 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. + **/ +s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_set_d3_lplu_state_generic"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); + if (ret_val) + return ret_val; + + if (!active) { + data &= ~IGP02E1000_PM_D3_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + return ret_val; + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + } else if (phy->smart_speed == e1000_smart_speed_off) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + } + } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || + (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || + (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { + data |= IGP02E1000_PM_D3_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + return ret_val; + + /* When LPLU is enabled, we should disable SmartSpeed */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + data); + } + + return ret_val; +} + +/** + * e1000_check_downshift_generic - Checks whether a downshift in speed occurred + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns 1 + * + * A downshift is detected by querying the PHY link health. + **/ +s32 e1000_check_downshift_generic(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, offset, mask; + + DEBUGFUNC("e1000_check_downshift_generic"); + + switch (phy->type) { + case e1000_phy_i210: + case e1000_phy_m88: + case e1000_phy_gg82563: + offset = M88E1000_PHY_SPEC_STATUS; + mask = M88E1000_PSSR_DOWNSHIFT; + break; + case e1000_phy_igp_2: + case e1000_phy_igp_3: + offset = IGP01E1000_PHY_LINK_HEALTH; + mask = IGP01E1000_PLHR_SS_DOWNGRADE; + break; + default: + /* speed downshift not supported */ + phy->speed_downgraded = FALSE; + return E1000_SUCCESS; + } + + ret_val = phy->ops.read_reg(hw, offset, &phy_data); + + if (!ret_val) + phy->speed_downgraded = !!(phy_data & mask); + + return ret_val; +} + +/** + * e1000_check_polarity_m88 - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY specific status register. + **/ +s32 e1000_check_polarity_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_check_polarity_m88"); + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data); + + if (!ret_val) + phy->cable_polarity = ((data & M88E1000_PSSR_REV_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_check_polarity_igp - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY port status register, and the + * current speed (since there is no polarity at 100Mbps). + **/ +s32 e1000_check_polarity_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data, offset, mask; + + DEBUGFUNC("e1000_check_polarity_igp"); + + /* Polarity is determined based on the speed of + * our connection. + */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data); + if (ret_val) + return ret_val; + + if ((data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + offset = IGP01E1000_PHY_PCS_INIT_REG; + mask = IGP01E1000_PHY_POLARITY_MASK; + } else { + /* This really only applies to 10Mbps since + * there is no polarity for 100Mbps (always 0). + */ + offset = IGP01E1000_PHY_PORT_STATUS; + mask = IGP01E1000_PSSR_POLARITY_REVERSED; + } + + ret_val = phy->ops.read_reg(hw, offset, &data); + + if (!ret_val) + phy->cable_polarity = ((data & mask) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_check_polarity_ife - Check cable polarity for IFE PHY + * @hw: pointer to the HW structure + * + * Polarity is determined on the polarity reversal feature being enabled. + **/ +s32 e1000_check_polarity_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, offset, mask; + + DEBUGFUNC("e1000_check_polarity_ife"); + + /* Polarity is determined based on the reversal feature being enabled. + */ + if (phy->polarity_correction) { + offset = IFE_PHY_EXTENDED_STATUS_CONTROL; + mask = IFE_PESC_POLARITY_REVERSED; + } else { + offset = IFE_PHY_SPECIAL_CONTROL; + mask = IFE_PSC_FORCE_POLARITY; + } + + ret_val = phy->ops.read_reg(hw, offset, &phy_data); + + if (!ret_val) + phy->cable_polarity = ((phy_data & mask) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_wait_autoneg - Wait for auto-neg completion + * @hw: pointer to the HW structure + * + * Waits for auto-negotiation to complete or for the auto-negotiation time + * limit to expire, which ever happens first. + **/ +static s32 e1000_wait_autoneg(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 i, phy_status; + + DEBUGFUNC("e1000_wait_autoneg"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ + for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_AUTONEG_COMPLETE) + break; + msec_delay(100); + } + + /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation + * has completed. + */ + return ret_val; +} + +/** + * e1000_phy_has_link_generic - Polls PHY for link + * @hw: pointer to the HW structure + * @iterations: number of times to poll for link + * @usec_interval: delay between polling attempts + * @success: pointer to whether polling was successful or not + * + * Polls the PHY status register for link, 'iterations' number of times. + **/ +s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, + u32 usec_interval, bool *success) +{ + s32 ret_val = E1000_SUCCESS; + u16 i, phy_status; + + DEBUGFUNC("e1000_phy_has_link_generic"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + for (i = 0; i < iterations; i++) { + /* Some PHYs require the PHY_STATUS register to be read + * twice due to the link bit being sticky. No harm doing + * it across the board. + */ + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) { + /* If the first read fails, another entity may have + * ownership of the resources, wait and try again to + * see if they have relinquished the resources yet. + */ + if (usec_interval >= 1000) + msec_delay(usec_interval/1000); + else + usec_delay(usec_interval); + } + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_LINK_STATUS) + break; + if (usec_interval >= 1000) + msec_delay(usec_interval/1000); + else + usec_delay(usec_interval); + } + + *success = (i < iterations); + + return ret_val; +} + +/** + * e1000_get_cable_length_m88 - Determine cable length for m88 PHY + * @hw: pointer to the HW structure + * + * Reads the PHY specific status register to retrieve the cable length + * information. The cable length is determined by averaging the minimum and + * maximum values to get the "average" cable length. The m88 PHY has four + * possible cable length values, which are: + * Register Value Cable Length + * 0 < 50 meters + * 1 50 - 80 meters + * 2 80 - 110 meters + * 3 110 - 140 meters + * 4 > 140 meters + **/ +s32 e1000_get_cable_length_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, index; + + DEBUGFUNC("e1000_get_cable_length_m88"); + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if (ret_val) + return ret_val; + + index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT); + + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) + return -E1000_ERR_PHY; + + phy->min_cable_length = e1000_m88_cable_length_table[index]; + phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; + + phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; + + return E1000_SUCCESS; +} + +s32 e1000_get_cable_length_m88_gen2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, phy_data2, is_cm; + u16 index, default_page; + + DEBUGFUNC("e1000_get_cable_length_m88_gen2"); + + switch (hw->phy.id) { + case I210_I_PHY_ID: + /* Get cable length from PHY Cable Diagnostics Control Reg */ + ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + + (I347AT4_PCDL + phy->addr), + &phy_data); + if (ret_val) + return ret_val; + + /* Check if the unit of cable length is meters or cm */ + ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + + I347AT4_PCDC, &phy_data2); + if (ret_val) + return ret_val; + + is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); + + /* Populate the phy structure with cable length in meters */ + phy->min_cable_length = phy_data / (is_cm ? 100 : 1); + phy->max_cable_length = phy_data / (is_cm ? 100 : 1); + phy->cable_length = phy_data / (is_cm ? 100 : 1); + break; + case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case I347AT4_E_PHY_ID: + /* Remember the original page select and set it to 7 */ + ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, + &default_page); + if (ret_val) + return ret_val; + + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07); + if (ret_val) + return ret_val; + + /* Get cable length from PHY Cable Diagnostics Control Reg */ + ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr), + &phy_data); + if (ret_val) + return ret_val; + + /* Check if the unit of cable length is meters or cm */ + ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2); + if (ret_val) + return ret_val; + + is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); + + /* Populate the phy structure with cable length in meters */ + phy->min_cable_length = phy_data / (is_cm ? 100 : 1); + phy->max_cable_length = phy_data / (is_cm ? 100 : 1); + phy->cable_length = phy_data / (is_cm ? 100 : 1); + + /* Reset the page select to its original value */ + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, + default_page); + if (ret_val) + return ret_val; + break; + + case M88E1112_E_PHY_ID: + /* Remember the original page select and set it to 5 */ + ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, + &default_page); + if (ret_val) + return ret_val; + + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE, + &phy_data); + if (ret_val) + return ret_val; + + index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT; + + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) + return -E1000_ERR_PHY; + + phy->min_cable_length = e1000_m88_cable_length_table[index]; + phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; + + phy->cable_length = (phy->min_cable_length + + phy->max_cable_length) / 2; + + /* Reset the page select to its original value */ + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, + default_page); + if (ret_val) + return ret_val; + + break; + default: + return -E1000_ERR_PHY; + } + + return ret_val; +} + +/** + * e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY + * @hw: pointer to the HW structure + * + * The automatic gain control (agc) normalizes the amplitude of the + * received signal, adjusting for the attenuation produced by the + * cable. By reading the AGC registers, which represent the + * combination of coarse and fine gain value, the value can be put + * into a lookup table to obtain the approximate cable length + * for each channel. + **/ +s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, i, agc_value = 0; + u16 cur_agc_index, max_agc_index = 0; + u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; + static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { + IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D + }; + + DEBUGFUNC("e1000_get_cable_length_igp_2"); + + /* Read the AGC registers for all channels */ + for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { + ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data); + if (ret_val) + return ret_val; + + /* Getting bits 15:9, which represent the combination of + * coarse and fine gain values. The result is a number + * that can be put into the lookup table to obtain the + * approximate cable length. + */ + cur_agc_index = ((phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & + IGP02E1000_AGC_LENGTH_MASK); + + /* Array index bound check. */ + if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) || + (cur_agc_index == 0)) + return -E1000_ERR_PHY; + + /* Remove min & max AGC values from calculation. */ + if (e1000_igp_2_cable_length_table[min_agc_index] > + e1000_igp_2_cable_length_table[cur_agc_index]) + min_agc_index = cur_agc_index; + if (e1000_igp_2_cable_length_table[max_agc_index] < + e1000_igp_2_cable_length_table[cur_agc_index]) + max_agc_index = cur_agc_index; + + agc_value += e1000_igp_2_cable_length_table[cur_agc_index]; + } + + agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] + + e1000_igp_2_cable_length_table[max_agc_index]); + agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); + + /* Calculate cable length with the error range of +/- 10 meters. */ + phy->min_cable_length = (((agc_value - IGP02E1000_AGC_RANGE) > 0) ? + (agc_value - IGP02E1000_AGC_RANGE) : 0); + phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE; + + phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; + + return E1000_SUCCESS; +} + +/** + * e1000_get_phy_info_m88 - Retrieve PHY information + * @hw: pointer to the HW structure + * + * Valid for only copper links. Read the PHY status register (sticky read) + * to verify that link is up. Read the PHY special control register to + * determine the polarity and 10base-T extended distance. Read the PHY + * special status register to determine MDI/MDIx and current speed. If + * speed is 1000, then determine cable length, local and remote receiver. + **/ +s32 e1000_get_phy_info_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_m88"); + + if (phy->media_type != e1000_media_type_copper) { + DEBUGOUT("Phy info is only valid for copper media\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy->polarity_correction = !!(phy_data & + M88E1000_PSCR_POLARITY_REVERSAL); + + ret_val = e1000_check_polarity_m88(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX); + + if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { + ret_val = hw->phy.ops.get_cable_length(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + /* Set values to "undefined" */ + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + + return ret_val; +} + +/** + * e1000_get_phy_info_igp - Retrieve igp PHY information + * @hw: pointer to the HW structure + * + * Read PHY status to determine if link is up. If link is up, then + * set/determine 10base-T extended distance and polarity correction. Read + * PHY port status to determine MDI/MDIx and speed. Based on the speed, + * determine on the cable length, local and remote receiver. + **/ +s32 e1000_get_phy_info_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_igp"); + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + phy->polarity_correction = TRUE; + + ret_val = e1000_check_polarity_igp(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX); + + if ((data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + ret_val = phy->ops.get_cable_length(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); + if (ret_val) + return ret_val; + + phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + + return ret_val; +} + +/** + * e1000_get_phy_info_ife - Retrieves various IFE PHY states + * @hw: pointer to the HW structure + * + * Populates "phy" structure with various feature states. + **/ +s32 e1000_get_phy_info_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_ife"); + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = phy->ops.read_reg(hw, IFE_PHY_SPECIAL_CONTROL, &data); + if (ret_val) + return ret_val; + phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE); + + if (phy->polarity_correction) { + ret_val = e1000_check_polarity_ife(hw); + if (ret_val) + return ret_val; + } else { + /* Polarity is forced */ + phy->cable_polarity = ((data & IFE_PSC_FORCE_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + } + + ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS); + + /* The following parameters are undefined for 10/100 operation. */ + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + + return E1000_SUCCESS; +} + +/** + * e1000_phy_sw_reset_generic - PHY software reset + * @hw: pointer to the HW structure + * + * Does a software reset of the PHY by reading the PHY control register and + * setting/write the control register reset bit to the PHY. + **/ +s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 phy_ctrl; + + DEBUGFUNC("e1000_phy_sw_reset_generic"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + return ret_val; + + phy_ctrl |= MII_CR_RESET; + ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + return ret_val; + + usec_delay(1); + + return ret_val; +} + +/** + * e1000_phy_hw_reset_generic - PHY hardware reset + * @hw: pointer to the HW structure + * + * Verify the reset block is not blocking us from resetting. Acquire + * semaphore (if necessary) and read/set/write the device control reset + * bit in the PHY. Wait the appropriate delay time for the device to + * reset and release the semaphore (if necessary). + **/ +s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u32 ctrl; + + DEBUGFUNC("e1000_phy_hw_reset_generic"); + + if (phy->ops.check_reset_block) { + ret_val = phy->ops.check_reset_block(hw); + if (ret_val) + return E1000_SUCCESS; + } + + ret_val = phy->ops.acquire(hw); + if (ret_val) + return ret_val; + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_PHY_RST); + E1000_WRITE_FLUSH(hw); + + usec_delay(phy->reset_delay_us); + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + E1000_WRITE_FLUSH(hw); + + usec_delay(150); + + phy->ops.release(hw); + + return phy->ops.get_cfg_done(hw); +} + +/** + * e1000_get_cfg_done_generic - Generic configuration done + * @hw: pointer to the HW structure + * + * Generic function to wait 10 milli-seconds for configuration to complete + * and return success. + **/ +s32 e1000_get_cfg_done_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_get_cfg_done_generic"); + + msec_delay_irq(10); + + return E1000_SUCCESS; +} + +/** + * e1000_phy_init_script_igp3 - Inits the IGP3 PHY + * @hw: pointer to the HW structure + * + * Initializes a Intel Gigabit PHY3 when an EEPROM is not present. + **/ +s32 e1000_phy_init_script_igp3(struct e1000_hw *hw) +{ + DEBUGOUT("Running IGP 3 PHY init script\n"); + + /* PHY init IGP 3 */ + /* Enable rise/fall, 10-mode work in class-A */ + hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018); + /* Remove all caps from Replica path filter */ + hw->phy.ops.write_reg(hw, 0x2F52, 0x0000); + /* Bias trimming for ADC, AFE and Driver (Default) */ + hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24); + /* Increase Hybrid poly bias */ + hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0); + /* Add 4% to Tx amplitude in Gig mode */ + hw->phy.ops.write_reg(hw, 0x2010, 0x10B0); + /* Disable trimming (TTT) */ + hw->phy.ops.write_reg(hw, 0x2011, 0x0000); + /* Poly DC correction to 94.6% + 2% for all channels */ + hw->phy.ops.write_reg(hw, 0x20DD, 0x249A); + /* ABS DC correction to 95.9% */ + hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3); + /* BG temp curve trim */ + hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE); + /* Increasing ADC OPAMP stage 1 currents to max */ + hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4); + /* Force 1000 ( required for enabling PHY regs configuration) */ + hw->phy.ops.write_reg(hw, 0x0000, 0x0140); + /* Set upd_freq to 6 */ + hw->phy.ops.write_reg(hw, 0x1F30, 0x1606); + /* Disable NPDFE */ + hw->phy.ops.write_reg(hw, 0x1F31, 0xB814); + /* Disable adaptive fixed FFE (Default) */ + hw->phy.ops.write_reg(hw, 0x1F35, 0x002A); + /* Enable FFE hysteresis */ + hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067); + /* Fixed FFE for short cable lengths */ + hw->phy.ops.write_reg(hw, 0x1F54, 0x0065); + /* Fixed FFE for medium cable lengths */ + hw->phy.ops.write_reg(hw, 0x1F55, 0x002A); + /* Fixed FFE for long cable lengths */ + hw->phy.ops.write_reg(hw, 0x1F56, 0x002A); + /* Enable Adaptive Clip Threshold */ + hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0); + /* AHT reset limit to 1 */ + hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF); + /* Set AHT master delay to 127 msec */ + hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC); + /* Set scan bits for AHT */ + hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF); + /* Set AHT Preset bits */ + hw->phy.ops.write_reg(hw, 0x1F79, 0x0210); + /* Change integ_factor of channel A to 3 */ + hw->phy.ops.write_reg(hw, 0x1895, 0x0003); + /* Change prop_factor of channels BCD to 8 */ + hw->phy.ops.write_reg(hw, 0x1796, 0x0008); + /* Change cg_icount + enable integbp for channels BCD */ + hw->phy.ops.write_reg(hw, 0x1798, 0xD008); + /* Change cg_icount + enable integbp + change prop_factor_master + * to 8 for channel A + */ + hw->phy.ops.write_reg(hw, 0x1898, 0xD918); + /* Disable AHT in Slave mode on channel A */ + hw->phy.ops.write_reg(hw, 0x187A, 0x0800); + /* Enable LPLU and disable AN to 1000 in non-D0a states, + * Enable SPD+B2B + */ + hw->phy.ops.write_reg(hw, 0x0019, 0x008D); + /* Enable restart AN on an1000_dis change */ + hw->phy.ops.write_reg(hw, 0x001B, 0x2080); + /* Enable wh_fifo read clock in 10/100 modes */ + hw->phy.ops.write_reg(hw, 0x0014, 0x0045); + /* Restart AN, Speed selection is 1000 */ + hw->phy.ops.write_reg(hw, 0x0000, 0x1340); + + return E1000_SUCCESS; +} + +/** + * e1000_get_phy_type_from_id - Get PHY type from id + * @phy_id: phy_id read from the phy + * + * Returns the phy type from the id. + **/ +enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id) +{ + enum e1000_phy_type phy_type = e1000_phy_unknown; + + switch (phy_id) { + case M88E1000_I_PHY_ID: + case M88E1000_E_PHY_ID: + case M88E1111_I_PHY_ID: + case M88E1011_I_PHY_ID: + case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1340M_E_PHY_ID: + phy_type = e1000_phy_m88; + break; + case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */ + phy_type = e1000_phy_igp_2; + break; + case GG82563_E_PHY_ID: + phy_type = e1000_phy_gg82563; + break; + case IGP03E1000_E_PHY_ID: + phy_type = e1000_phy_igp_3; + break; + case IFE_E_PHY_ID: + case IFE_PLUS_E_PHY_ID: + case IFE_C_E_PHY_ID: + phy_type = e1000_phy_ife; + break; + case I82580_I_PHY_ID: + phy_type = e1000_phy_82580; + break; + case I210_I_PHY_ID: + phy_type = e1000_phy_i210; + break; + default: + phy_type = e1000_phy_unknown; + break; + } + return phy_type; +} + +/** + * e1000_determine_phy_address - Determines PHY address. + * @hw: pointer to the HW structure + * + * This uses a trial and error method to loop through possible PHY + * addresses. It tests each by reading the PHY ID registers and + * checking for a match. + **/ +s32 e1000_determine_phy_address(struct e1000_hw *hw) +{ + u32 phy_addr = 0; + u32 i; + enum e1000_phy_type phy_type = e1000_phy_unknown; + + hw->phy.id = phy_type; + + for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) { + hw->phy.addr = phy_addr; + i = 0; + + do { + e1000_get_phy_id(hw); + phy_type = e1000_get_phy_type_from_id(hw->phy.id); + + /* If phy_type is valid, break - we found our + * PHY address + */ + if (phy_type != e1000_phy_unknown) + return E1000_SUCCESS; + + msec_delay(1); + i++; + } while (i < 10); + } + + return -E1000_ERR_PHY_TYPE; +} + +/** + * e1000_power_up_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_up_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); + mii_reg &= ~MII_CR_POWER_DOWN; + hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); +} + +/** + * e1000_power_down_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_down_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); + mii_reg |= MII_CR_POWER_DOWN; + hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); + msec_delay(1); +} + +/** + * e1000_check_polarity_82577 - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY specific status register. + **/ +s32 e1000_check_polarity_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_check_polarity_82577"); + + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); + + if (!ret_val) + phy->cable_polarity = ((data & I82577_PHY_STATUS2_REV_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. + **/ +s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_82577"); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &phy_data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + return ret_val; + + usec_delay(1); + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on 82577 phy\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) + DEBUGOUT("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + } + + return ret_val; +} + +/** + * e1000_get_phy_info_82577 - Retrieve I82577 PHY information + * @hw: pointer to the HW structure + * + * Read PHY status to determine if link is up. If link is up, then + * set/determine 10base-T extended distance and polarity correction. Read + * PHY port status to determine MDI/MDIx and speed. Based on the speed, + * determine on the cable length, local and remote receiver. + **/ +s32 e1000_get_phy_info_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_82577"); + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + phy->polarity_correction = TRUE; + + ret_val = e1000_check_polarity_82577(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX); + + if ((data & I82577_PHY_STATUS2_SPEED_MASK) == + I82577_PHY_STATUS2_SPEED_1000MBPS) { + ret_val = hw->phy.ops.get_cable_length(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); + if (ret_val) + return ret_val; + + phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + + return E1000_SUCCESS; +} + +/** + * e1000_get_cable_length_82577 - Determine cable length for 82577 PHY + * @hw: pointer to the HW structure + * + * Reads the diagnostic status register and verifies result is valid before + * placing it in the phy_cable_length field. + **/ +s32 e1000_get_cable_length_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, length; + + DEBUGFUNC("e1000_get_cable_length_82577"); + + ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data); + if (ret_val) + return ret_val; + + length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >> + I82577_DSTATUS_CABLE_LENGTH_SHIFT); + + if (length == E1000_CABLE_LENGTH_UNDEFINED) + return -E1000_ERR_PHY; + + phy->cable_length = length; + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_gs40g - Write GS40G PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + u16 page = offset >> GS40G_PAGE_SHIFT; + + DEBUGFUNC("e1000_write_phy_reg_gs40g"); + + offset = offset & GS40G_OFFSET_MASK; + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); + if (ret_val) + goto release; + ret_val = e1000_write_phy_reg_mdic(hw, offset, data); + +release: + hw->phy.ops.release(hw); + return ret_val; +} + +/** + * e1000_read_phy_reg_gs40g - Read GS40G PHY register + * @hw: pointer to the HW structure + * @offset: lower half is register offset to read to + * upper half is page to use. + * @data: data to read at register offset + * + * Acquires semaphore, if necessary, then reads the data in the PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + u16 page = offset >> GS40G_PAGE_SHIFT; + + DEBUGFUNC("e1000_read_phy_reg_gs40g"); + + offset = offset & GS40G_OFFSET_MASK; + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); + if (ret_val) + goto release; + ret_val = e1000_read_phy_reg_mdic(hw, offset, data); + +release: + hw->phy.ops.release(hw); + return ret_val; +} + +/** + * e1000_read_phy_reg_mphy - Read mPHY control register + * @hw: pointer to the HW structure + * @address: address to be read + * @data: pointer to the read data + * + * Reads the mPHY control register in the PHY at offset and stores the + * information read to data. + **/ +s32 e1000_read_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 *data) +{ + u32 mphy_ctrl = 0; + bool locked = FALSE; + bool ready; + + DEBUGFUNC("e1000_read_phy_reg_mphy"); + + /* Check if mPHY is ready to read/write operations */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* Check if mPHY access is disabled and enable it if so */ + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) { + locked = TRUE; + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + mphy_ctrl |= E1000_MPHY_ENA_ACCESS; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + } + + /* Set the address that we want to read */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* We mask address, because we want to use only current lane */ + mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK & + ~E1000_MPHY_ADDRESS_FNC_OVERRIDE) | + (address & E1000_MPHY_ADDRESS_MASK); + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + + /* Read data from the address */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + *data = E1000_READ_REG(hw, E1000_MPHY_DATA); + + /* Disable access to mPHY if it was originally disabled */ + if (locked) + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, + E1000_MPHY_DIS_ACCESS); + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_mphy - Write mPHY control register + * @hw: pointer to the HW structure + * @address: address to write to + * @data: data to write to register at offset + * @line_override: used when we want to use different line than default one + * + * Writes data to mPHY control register. + **/ +s32 e1000_write_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 data, + bool line_override) +{ + u32 mphy_ctrl = 0; + bool locked = FALSE; + bool ready; + + DEBUGFUNC("e1000_write_phy_reg_mphy"); + + /* Check if mPHY is ready to read/write operations */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* Check if mPHY access is disabled and enable it if so */ + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) { + locked = TRUE; + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + mphy_ctrl |= E1000_MPHY_ENA_ACCESS; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + } + + /* Set the address that we want to read */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* We mask address, because we want to use only current lane */ + if (line_override) + mphy_ctrl |= E1000_MPHY_ADDRESS_FNC_OVERRIDE; + else + mphy_ctrl &= ~E1000_MPHY_ADDRESS_FNC_OVERRIDE; + mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK) | + (address & E1000_MPHY_ADDRESS_MASK); + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + + /* Read data from the address */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_DATA, data); + + /* Disable access to mPHY if it was originally disabled */ + if (locked) + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, + E1000_MPHY_DIS_ACCESS); + + return E1000_SUCCESS; +} + +/** + * e1000_is_mphy_ready - Check if mPHY control register is not busy + * @hw: pointer to the HW structure + * + * Returns mPHY control register status. + **/ +bool e1000_is_mphy_ready(struct e1000_hw *hw) +{ + u16 retry_count = 0; + u32 mphy_ctrl = 0; + bool ready = FALSE; + + while (retry_count < 2) { + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_BUSY) { + usec_delay(20); + retry_count++; + continue; + } + ready = TRUE; + break; + } + + if (!ready) + DEBUGOUT("ERROR READING mPHY control register, phy is busy.\n"); + + return ready; +} Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_phy.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_phy.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_phy.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_phy.h (revision 291673) @@ -0,0 +1,276 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_PHY_H_ +#define _E1000_PHY_H_ + +void e1000_init_phy_ops_generic(struct e1000_hw *hw); +s32 e1000_null_read_reg(struct e1000_hw *hw, u32 offset, u16 *data); +void e1000_null_phy_generic(struct e1000_hw *hw); +s32 e1000_null_lplu_state(struct e1000_hw *hw, bool active); +s32 e1000_null_write_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_null_set_page(struct e1000_hw *hw, u16 data); +s32 e1000_read_i2c_byte_null(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +s32 e1000_write_i2c_byte_null(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +s32 e1000_check_downshift_generic(struct e1000_hw *hw); +s32 e1000_check_polarity_m88(struct e1000_hw *hw); +s32 e1000_check_polarity_igp(struct e1000_hw *hw); +s32 e1000_check_polarity_ife(struct e1000_hw *hw); +s32 e1000_check_reset_block_generic(struct e1000_hw *hw); +#if !defined(NO_82543_SUPPORT) || defined(QV_RELEASE) || defined(ULP_IN_D0_SUPPORT) +s32 e1000_phy_setup_autoneg(struct e1000_hw *hw); +#endif +s32 e1000_copper_link_setup_igp(struct e1000_hw *hw); +s32 e1000_copper_link_setup_m88(struct e1000_hw *hw); +s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); +s32 e1000_get_cable_length_m88(struct e1000_hw *hw); +s32 e1000_get_cable_length_m88_gen2(struct e1000_hw *hw); +s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw); +s32 e1000_get_cfg_done_generic(struct e1000_hw *hw); +s32 e1000_get_phy_id(struct e1000_hw *hw); +s32 e1000_get_phy_info_igp(struct e1000_hw *hw); +s32 e1000_get_phy_info_m88(struct e1000_hw *hw); +s32 e1000_get_phy_info_ife(struct e1000_hw *hw); +s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw); +void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); +s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw); +s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw); +s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page); +s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active); +s32 e1000_setup_copper_link_generic(struct e1000_hw *hw); +s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, + u32 usec_interval, bool *success); +s32 e1000_phy_init_script_igp3(struct e1000_hw *hw); +enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id); +s32 e1000_determine_phy_address(struct e1000_hw *hw); +s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); +s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); +void e1000_power_up_phy_copper(struct e1000_hw *hw); +void e1000_power_down_phy_copper(struct e1000_hw *hw); +s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data); +s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data); +s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); +s32 e1000_check_polarity_82577(struct e1000_hw *hw); +s32 e1000_get_phy_info_82577(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw); +s32 e1000_get_cable_length_82577(struct e1000_hw *hw); +s32 e1000_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 *data); +s32 e1000_write_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 data, + bool line_override); +bool e1000_is_mphy_ready(struct e1000_hw *hw); + +#define E1000_MAX_PHY_ADDR 8 + +/* IGP01E1000 Specific Registers */ +#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ +#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */ +#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */ +#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */ +#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */ +#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */ +#define IGP_PAGE_SHIFT 5 +#define PHY_REG_MASK 0x1F + +/* GS40G - I210 PHY defines */ +#define GS40G_PAGE_SELECT 0x16 +#define GS40G_PAGE_SHIFT 16 +#define GS40G_OFFSET_MASK 0xFFFF +#define GS40G_PAGE_2 0x20000 +#define GS40G_MAC_REG2 0x15 +#define GS40G_MAC_LB 0x4140 +#define GS40G_MAC_SPEED_1G 0X0006 +#define GS40G_COPPER_SPEC 0x0010 + +#define HV_INTC_FC_PAGE_START 768 +#define I82578_ADDR_REG 29 +#define I82577_ADDR_REG 16 +#define I82577_CFG_REG 22 +#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) +#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift */ +#define I82577_CTRL_REG 23 + +/* 82577 specific PHY registers */ +#define I82577_PHY_CTRL_2 18 +#define I82577_PHY_LBK_CTRL 19 +#define I82577_PHY_STATUS_2 26 +#define I82577_PHY_DIAG_STATUS 31 + +/* I82577 PHY Status 2 */ +#define I82577_PHY_STATUS2_REV_POLARITY 0x0400 +#define I82577_PHY_STATUS2_MDIX 0x0800 +#define I82577_PHY_STATUS2_SPEED_MASK 0x0300 +#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200 + +/* I82577 PHY Control 2 */ +#define I82577_PHY_CTRL2_MANUAL_MDIX 0x0200 +#define I82577_PHY_CTRL2_AUTO_MDI_MDIX 0x0400 +#define I82577_PHY_CTRL2_MDIX_CFG_MASK 0x0600 + +/* I82577 PHY Diagnostics Status */ +#define I82577_DSTATUS_CABLE_LENGTH 0x03FC +#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2 + +/* 82580 PHY Power Management */ +#define E1000_82580_PHY_POWER_MGMT 0xE14 +#define E1000_82580_PM_SPD 0x0001 /* Smart Power Down */ +#define E1000_82580_PM_D0_LPLU 0x0002 /* For D0a states */ +#define E1000_82580_PM_D3_LPLU 0x0004 /* For all other states */ +#define E1000_82580_PM_GO_LINKD 0x0020 /* Go Link Disconnect */ + +#define E1000_MPHY_DIS_ACCESS 0x80000000 /* disable_access bit */ +#define E1000_MPHY_ENA_ACCESS 0x40000000 /* enable_access bit */ +#define E1000_MPHY_BUSY 0x00010000 /* busy bit */ +#define E1000_MPHY_ADDRESS_FNC_OVERRIDE 0x20000000 /* fnc_override bit */ +#define E1000_MPHY_ADDRESS_MASK 0x0000FFFF /* address mask */ + +#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 +#define IGP01E1000_PHY_POLARITY_MASK 0x0078 + +#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 +#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */ + +#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 + +#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */ + +#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 + +#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 +#define IGP01E1000_PSSR_MDIX 0x0800 +#define IGP01E1000_PSSR_SPEED_MASK 0xC000 +#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 + +#define IGP02E1000_PHY_CHANNEL_NUM 4 +#define IGP02E1000_PHY_AGC_A 0x11B1 +#define IGP02E1000_PHY_AGC_B 0x12B1 +#define IGP02E1000_PHY_AGC_C 0x14B1 +#define IGP02E1000_PHY_AGC_D 0x18B1 + +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course=15:13, Fine=12:9 */ +#define IGP02E1000_AGC_LENGTH_MASK 0x7F +#define IGP02E1000_AGC_RANGE 15 + +#define E1000_CABLE_LENGTH_UNDEFINED 0xFF + +#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000 +#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16 +#define E1000_KMRNCTRLSTA_REN 0x00200000 +#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ +#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */ +#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */ +#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */ +#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ +#if !defined(EXTERNAL_RELEASE) || defined(ULP_IN_D0_SUPPORT) +#define E1000_KMRNCTRLSTA_K0S_CTRL 0x1E /* Kumeran K0s Control */ +#define E1000_KMRNCTRLSTA_K0S_CTRL_ENTRY_LTNCY_SHIFT 0 +#define E1000_KMRNCTRLSTA_K0S_CTRL_MIN_TIME_SHIFT 4 +#define E1000_KMRNCTRLSTA_K0S_CTRL_ENTRY_LTNCY_MASK \ + (3 << E1000_KMRNCTRLSTA_K0S_CTRL_ENTRY_LTNCY_SHIFT) +#define E1000_KMRNCTRLSTA_K0S_CTRL_MIN_TIME_MASK \ + (7 << E1000_KMRNCTRLSTA_K0S_CTRL_MIN_TIME_SHIFT) +#define E1000_KMRNCTRLSTA_OP_MODES 0x1F /* Kumeran Modes of Operation */ +#define E1000_KMRNCTRLSTA_OP_MODES_LSC2CSC 0x0002 /* change LSC to CSC */ +#endif /* !EXTERNAL_RELEASE || ULP_IN_D0_SUPPORT */ + +#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 +#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Ctrl */ +#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Ctrl */ +#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */ + +/* IFE PHY Extended Status Control */ +#define IFE_PESC_POLARITY_REVERSED 0x0100 + +/* IFE PHY Special Control */ +#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 +#define IFE_PSC_FORCE_POLARITY 0x0020 + +/* IFE PHY Special Control and LED Control */ +#define IFE_PSCL_PROBE_MODE 0x0020 +#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ +#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ + +/* IFE PHY MDIX Control */ +#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ +#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */ +#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto, 0=disable */ + +/* SFP modules ID memory locations */ +#define E1000_SFF_IDENTIFIER_OFFSET 0x00 +#define E1000_SFF_IDENTIFIER_SFF 0x02 +#define E1000_SFF_IDENTIFIER_SFP 0x03 + +#define E1000_SFF_ETH_FLAGS_OFFSET 0x06 +/* Flags for SFP modules compatible with ETH up to 1Gb */ +struct sfp_e1000_flags { + u8 e1000_base_sx:1; + u8 e1000_base_lx:1; + u8 e1000_base_cx:1; + u8 e1000_base_t:1; + u8 e100_base_lx:1; + u8 e100_base_fx:1; + u8 e10_base_bx10:1; + u8 e10_base_px:1; +}; + +/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */ +#define E1000_SFF_VENDOR_OUI_TYCO 0x00407600 +#define E1000_SFF_VENDOR_OUI_FTL 0x00906500 +#define E1000_SFF_VENDOR_OUI_AVAGO 0x00176A00 +#define E1000_SFF_VENDOR_OUI_INTEL 0x001B2100 + +#endif Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_phy.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_regs.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_regs.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_regs.h (revision 291673) @@ -0,0 +1,664 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_REGS_H_ +#define _E1000_REGS_H_ + +#define E1000_CTRL 0x00000 /* Device Control - RW */ +#define E1000_STATUS 0x00008 /* Device Status - RO */ +#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ +#define E1000_EERD 0x00014 /* EEPROM Read - RW */ +#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ +#define E1000_FLA 0x0001C /* Flash Access - RW */ +#define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_MDICNFG 0x00E04 /* MDI Config - RW */ +#define E1000_REGISTER_SET_SIZE 0x20000 /* CSR Size */ +#define E1000_EEPROM_INIT_CTRL_WORD_2 0x0F /* EEPROM Init Ctrl Word 2 */ +#define E1000_EEPROM_PCIE_CTRL_WORD_2 0x28 /* EEPROM PCIe Ctrl Word 2 */ +#define E1000_BARCTRL 0x5BBC /* BAR ctrl reg */ +#define E1000_BARCTRL_FLSIZE 0x0700 /* BAR ctrl Flsize */ +#define E1000_BARCTRL_CSRSIZE 0x2000 /* BAR ctrl CSR size */ +#define E1000_MPHY_ADDR_CTRL 0x0024 /* GbE MPHY Address Control */ +#define E1000_MPHY_DATA 0x0E10 /* GBE MPHY Data */ +#define E1000_MPHY_STAT 0x0E0C /* GBE MPHY Statistics */ +#define E1000_PPHY_CTRL 0x5b48 /* PCIe PHY Control */ +#define E1000_I350_BARCTRL 0x5BFC /* BAR ctrl reg */ +#define E1000_I350_DTXMXPKTSZ 0x355C /* Maximum sent packet size reg*/ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ +#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ +#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ +#if !defined(EXTERNAL_RELEASE) || defined(ULP_SUPPORT) +#define E1000_FEXT 0x0002C /* Future Extended - RW */ +#endif /* !EXTERNAL_RELEASE || ULP_SUPPORT */ +#define E1000_FCT 0x00030 /* Flow Control Type - RW */ +#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */ +#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ +#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ +#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ +#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ +#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ +#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ +#define E1000_RCTL 0x00100 /* Rx Control - RW */ +#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ +#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */ +#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */ +#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ +#define E1000_EITR(_n) (0x01680 + (0x4 * (_n))) +#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */ +#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */ +#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ +#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ +#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ +#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */ +#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */ +#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */ +#define E1000_TCTL 0x00400 /* Tx Control - RW */ +#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */ +#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */ +#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ +#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_LEDMUX 0x08130 /* LED MUX Control */ +#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ +#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ +#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ +#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ +#define E1000_EEARBC_I210 0x12024 /* EEPROM Auto Read Bus Control */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ +#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */ +#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */ +#define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */ +#define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */ +#define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */ +#define E1000_I2C_DATA_OE_N 0x00000800 /* I2C- Data Output Enable */ +#define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */ +#define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */ +#define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */ +#define E1000_I2C_CLK_STRETCH_DIS 0x00008000 /* I2C- Dis Clk Stretching */ +#define E1000_WDSTP 0x01040 /* Watchdog Setup - RW */ +#define E1000_SWDSTS 0x01044 /* SW Device Status - RW */ +#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */ +#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */ +#define E1000_VPDDIAG 0x01060 /* VPD Diagnostic - RO */ +#define E1000_ICR_V2 0x01500 /* Intr Cause - new location - RC */ +#define E1000_ICS_V2 0x01504 /* Intr Cause Set - new location - WO */ +#define E1000_IMS_V2 0x01508 /* Intr Mask Set/Read - new location - RW */ +#define E1000_IMC_V2 0x0150C /* Intr Mask Clear - new location - WO */ +#define E1000_IAM_V2 0x01510 /* Intr Ack Auto Mask - new location - RW */ +#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ +#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ +#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ +#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ +#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ +#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ +#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ +#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ +#define E1000_PBRTH 0x02458 /* PB Rx Arbitration Threshold - RW */ +#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */ +/* Split and Replication Rx Control - RW */ +#define E1000_RDPUMB 0x025CC /* DMA Rx Descriptor uC Mailbox - RW */ +#define E1000_RDPUAD 0x025D0 /* DMA Rx Descriptor uC Addr Command - RW */ +#define E1000_RDPUWD 0x025D4 /* DMA Rx Descriptor uC Data Write - RW */ +#define E1000_RDPURD 0x025D8 /* DMA Rx Descriptor uC Data Read - RW */ +#define E1000_RDPUCTL 0x025DC /* DMA Rx Descriptor uC Control - RW */ +#define E1000_PBDIAG 0x02458 /* Packet Buffer Diagnostic - RW */ +#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */ +#define E1000_IRPBS 0x02404 /* Same as RXPBS, renamed for newer Si - RW */ +#define E1000_PBRWAC 0x024E8 /* Rx packet buffer wrap around counter - RO */ +#define E1000_RDTR 0x02820 /* Rx Delay Timer - RW */ +#define E1000_RADV 0x0282C /* Rx Interrupt Absolute Delay Timer - RW */ +#define E1000_EMIADD 0x10 /* Extended Memory Indirect Address */ +#define E1000_EMIDATA 0x11 /* Extended Memory Indirect Data */ +#define E1000_SRWR 0x12018 /* Shadow Ram Write Register - RW */ +#define E1000_I210_FLMNGCTL 0x12038 +#define E1000_I210_FLMNGDATA 0x1203C +#define E1000_I210_FLMNGCNT 0x12040 + +#define E1000_I210_FLSWCTL 0x12048 +#define E1000_I210_FLSWDATA 0x1204C +#define E1000_I210_FLSWCNT 0x12050 + +#define E1000_I210_FLA 0x1201C + +#define E1000_INVM_DATA_REG(_n) (0x12120 + 4*(_n)) +#define E1000_INVM_SIZE 64 /* Number of INVM Data Registers */ + +/* QAV Tx mode control register */ +#define E1000_I210_TQAVCTRL 0x3570 + +/* QAV Tx mode control register bitfields masks */ +/* QAV enable */ +#define E1000_TQAVCTRL_MODE (1 << 0) +/* Fetching arbitration type */ +#define E1000_TQAVCTRL_FETCH_ARB (1 << 4) +/* Fetching timer enable */ +#define E1000_TQAVCTRL_FETCH_TIMER_ENABLE (1 << 5) +/* Launch arbitration type */ +#define E1000_TQAVCTRL_LAUNCH_ARB (1 << 8) +/* Launch timer enable */ +#define E1000_TQAVCTRL_LAUNCH_TIMER_ENABLE (1 << 9) +/* SP waits for SR enable */ +#define E1000_TQAVCTRL_SP_WAIT_SR (1 << 10) +/* Fetching timer correction */ +#define E1000_TQAVCTRL_FETCH_TIMER_DELTA_OFFSET 16 +#define E1000_TQAVCTRL_FETCH_TIMER_DELTA \ + (0xFFFF << E1000_TQAVCTRL_FETCH_TIMER_DELTA_OFFSET) + +/* High credit registers where _n can be 0 or 1. */ +#define E1000_I210_TQAVHC(_n) (0x300C + 0x40 * (_n)) + +/* Queues fetch arbitration priority control register */ +#define E1000_I210_TQAVARBCTRL 0x3574 +/* Queues priority masks where _n and _p can be 0-3. */ +#define E1000_TQAVARBCTRL_QUEUE_PRI(_n, _p) ((_p) << (2 * (_n))) +/* QAV Tx mode control registers where _n can be 0 or 1. */ +#define E1000_I210_TQAVCC(_n) (0x3004 + 0x40 * (_n)) + +/* QAV Tx mode control register bitfields masks */ +#define E1000_TQAVCC_IDLE_SLOPE 0xFFFF /* Idle slope */ +#define E1000_TQAVCC_KEEP_CREDITS (1 << 30) /* Keep credits opt enable */ +#define E1000_TQAVCC_QUEUE_MODE (1 << 31) /* SP vs. SR Tx mode */ + +/* Good transmitted packets counter registers */ +#define E1000_PQGPTC(_n) (0x010014 + (0x100 * (_n))) + +/* Queues packet buffer size masks where _n can be 0-3 and _s 0-63 [kB] */ +#define E1000_I210_TXPBS_SIZE(_n, _s) ((_s) << (6 * (_n))) + +#define E1000_MMDAC 13 /* MMD Access Control */ +#define E1000_MMDAAD 14 /* MMD Access Address/Data */ + +/* Convenience macros + * + * Note: "_n" is the queue number of the register to be written to. + * + * Example usage: + * E1000_RDBAL_REG(current_rx_queue) + */ +#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \ + (0x0C000 + ((_n) * 0x40))) +#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \ + (0x0C004 + ((_n) * 0x40))) +#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \ + (0x0C008 + ((_n) * 0x40))) +#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \ + (0x0C00C + ((_n) * 0x40))) +#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \ + (0x0C010 + ((_n) * 0x40))) +#define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \ + (0x0C014 + ((_n) * 0x40))) +#define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n) +#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \ + (0x0C018 + ((_n) * 0x40))) +#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \ + (0x0C028 + ((_n) * 0x40))) +#define E1000_RQDPC(_n) ((_n) < 4 ? (0x02830 + ((_n) * 0x100)) : \ + (0x0C030 + ((_n) * 0x40))) +#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \ + (0x0E000 + ((_n) * 0x40))) +#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \ + (0x0E004 + ((_n) * 0x40))) +#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \ + (0x0E008 + ((_n) * 0x40))) +#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \ + (0x0E010 + ((_n) * 0x40))) +#define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \ + (0x0E014 + ((_n) * 0x40))) +#define E1000_DCA_TXCTRL(_n) E1000_TXCTL(_n) +#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \ + (0x0E018 + ((_n) * 0x40))) +#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \ + (0x0E028 + ((_n) * 0x40))) +#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) : \ + (0x0E038 + ((_n) * 0x40))) +#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) : \ + (0x0E03C + ((_n) * 0x40))) +#define E1000_TARC(_n) (0x03840 + ((_n) * 0x100)) +#define E1000_RSRPD 0x02C00 /* Rx Small Packet Detect - RW */ +#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ +#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ +#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4)) +#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ + (0x054E0 + ((_i - 16) * 8))) +#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ + (0x054E4 + ((_i - 16) * 8))) +#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8)) +#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8)) +#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8)) +#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4)) +#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4)) +#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8)) +#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8)) +#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8)) +#define E1000_PBSLAC 0x03100 /* Pkt Buffer Slave Access Control */ +#define E1000_PBSLAD(_n) (0x03110 + (0x4 * (_n))) /* Pkt Buffer DWORD */ +#define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */ +/* Same as TXPBS, renamed for newer Si - RW */ +#define E1000_ITPBS 0x03404 +#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ +#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ +#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ +#define E1000_TDPUMB 0x0357C /* DMA Tx Desc uC Mail Box - RW */ +#define E1000_TDPUAD 0x03580 /* DMA Tx Desc uC Addr Command - RW */ +#define E1000_TDPUWD 0x03584 /* DMA Tx Desc uC Data Write - RW */ +#define E1000_TDPURD 0x03588 /* DMA Tx Desc uC Data Read - RW */ +#define E1000_TDPUCTL 0x0358C /* DMA Tx Desc uC Control - RW */ +#define E1000_DTXCTL 0x03590 /* DMA Tx Control - RW */ +#define E1000_DTXTCPFLGL 0x0359C /* DMA Tx Control flag low - RW */ +#define E1000_DTXTCPFLGH 0x035A0 /* DMA Tx Control flag high - RW */ +/* DMA Tx Max Total Allow Size Reqs - RW */ +#define E1000_DTXMXSZRQ 0x03540 +#define E1000_TIDV 0x03820 /* Tx Interrupt Delay Value - RW */ +#define E1000_TADV 0x0382C /* Tx Interrupt Absolute Delay Val - RW */ +#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ +#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ +#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ +#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ +#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ +#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ +#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ +#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ +#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ +#define E1000_COLC 0x04028 /* Collision Count - R/clr */ +#define E1000_DC 0x04030 /* Defer Count - R/clr */ +#define E1000_TNCRS 0x04034 /* Tx-No CRS - R/clr */ +#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ +#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ +#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ +#define E1000_XONRXC 0x04048 /* XON Rx Count - R/clr */ +#define E1000_XONTXC 0x0404C /* XON Tx Count - R/clr */ +#define E1000_XOFFRXC 0x04050 /* XOFF Rx Count - R/clr */ +#define E1000_XOFFTXC 0x04054 /* XOFF Tx Count - R/clr */ +#define E1000_FCRUC 0x04058 /* Flow Control Rx Unsupported Count- R/clr */ +#define E1000_PRC64 0x0405C /* Packets Rx (64 bytes) - R/clr */ +#define E1000_PRC127 0x04060 /* Packets Rx (65-127 bytes) - R/clr */ +#define E1000_PRC255 0x04064 /* Packets Rx (128-255 bytes) - R/clr */ +#define E1000_PRC511 0x04068 /* Packets Rx (255-511 bytes) - R/clr */ +#define E1000_PRC1023 0x0406C /* Packets Rx (512-1023 bytes) - R/clr */ +#define E1000_PRC1522 0x04070 /* Packets Rx (1024-1522 bytes) - R/clr */ +#define E1000_GPRC 0x04074 /* Good Packets Rx Count - R/clr */ +#define E1000_BPRC 0x04078 /* Broadcast Packets Rx Count - R/clr */ +#define E1000_MPRC 0x0407C /* Multicast Packets Rx Count - R/clr */ +#define E1000_GPTC 0x04080 /* Good Packets Tx Count - R/clr */ +#define E1000_GORCL 0x04088 /* Good Octets Rx Count Low - R/clr */ +#define E1000_GORCH 0x0408C /* Good Octets Rx Count High - R/clr */ +#define E1000_GOTCL 0x04090 /* Good Octets Tx Count Low - R/clr */ +#define E1000_GOTCH 0x04094 /* Good Octets Tx Count High - R/clr */ +#define E1000_RNBC 0x040A0 /* Rx No Buffers Count - R/clr */ +#define E1000_RUC 0x040A4 /* Rx Undersize Count - R/clr */ +#define E1000_RFC 0x040A8 /* Rx Fragment Count - R/clr */ +#define E1000_ROC 0x040AC /* Rx Oversize Count - R/clr */ +#define E1000_RJC 0x040B0 /* Rx Jabber Count - R/clr */ +#define E1000_MGTPRC 0x040B4 /* Management Packets Rx Count - R/clr */ +#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ +#define E1000_MGTPTC 0x040BC /* Management Packets Tx Count - R/clr */ +#define E1000_TORL 0x040C0 /* Total Octets Rx Low - R/clr */ +#define E1000_TORH 0x040C4 /* Total Octets Rx High - R/clr */ +#define E1000_TOTL 0x040C8 /* Total Octets Tx Low - R/clr */ +#define E1000_TOTH 0x040CC /* Total Octets Tx High - R/clr */ +#define E1000_TPR 0x040D0 /* Total Packets Rx - R/clr */ +#define E1000_TPT 0x040D4 /* Total Packets Tx - R/clr */ +#define E1000_PTC64 0x040D8 /* Packets Tx (64 bytes) - R/clr */ +#define E1000_PTC127 0x040DC /* Packets Tx (65-127 bytes) - R/clr */ +#define E1000_PTC255 0x040E0 /* Packets Tx (128-255 bytes) - R/clr */ +#define E1000_PTC511 0x040E4 /* Packets Tx (256-511 bytes) - R/clr */ +#define E1000_PTC1023 0x040E8 /* Packets Tx (512-1023 bytes) - R/clr */ +#define E1000_PTC1522 0x040EC /* Packets Tx (1024-1522 Bytes) - R/clr */ +#define E1000_MPTC 0x040F0 /* Multicast Packets Tx Count - R/clr */ +#define E1000_BPTC 0x040F4 /* Broadcast Packets Tx Count - R/clr */ +#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context Tx - R/clr */ +#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context Tx Fail - R/clr */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Pkt Timer Expire Count */ +#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Abs Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Pkt Timer Expire Count */ +#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Abs Timer Expire Count */ +#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Min Thresh Count */ +#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Desc Min Thresh Count */ +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ + +#define E1000_VFGPRC 0x00F10 +#define E1000_VFGORC 0x00F18 +#define E1000_VFMPRC 0x00F3C +#define E1000_VFGPTC 0x00F14 +#define E1000_VFGOTC 0x00F34 +#define E1000_VFGOTLBC 0x00F50 +#define E1000_VFGPTLBC 0x00F44 +#define E1000_VFGORLBC 0x00F48 +#define E1000_VFGPRLBC 0x00F40 +/* Virtualization statistical counters */ +#define E1000_PFVFGPRC(_n) (0x010010 + (0x100 * (_n))) +#define E1000_PFVFGPTC(_n) (0x010014 + (0x100 * (_n))) +#define E1000_PFVFGORC(_n) (0x010018 + (0x100 * (_n))) +#define E1000_PFVFGOTC(_n) (0x010034 + (0x100 * (_n))) +#define E1000_PFVFMPRC(_n) (0x010038 + (0x100 * (_n))) +#define E1000_PFVFGPRLBC(_n) (0x010040 + (0x100 * (_n))) +#define E1000_PFVFGPTLBC(_n) (0x010044 + (0x100 * (_n))) +#define E1000_PFVFGORLBC(_n) (0x010048 + (0x100 * (_n))) +#define E1000_PFVFGOTLBC(_n) (0x010050 + (0x100 * (_n))) + +/* LinkSec */ +#define E1000_LSECTXUT 0x04300 /* Tx Untagged Pkt Cnt */ +#define E1000_LSECTXPKTE 0x04304 /* Encrypted Tx Pkts Cnt */ +#define E1000_LSECTXPKTP 0x04308 /* Protected Tx Pkt Cnt */ +#define E1000_LSECTXOCTE 0x0430C /* Encrypted Tx Octets Cnt */ +#define E1000_LSECTXOCTP 0x04310 /* Protected Tx Octets Cnt */ +#define E1000_LSECRXUT 0x04314 /* Untagged non-Strict Rx Pkt Cnt */ +#define E1000_LSECRXOCTD 0x0431C /* Rx Octets Decrypted Count */ +#define E1000_LSECRXOCTV 0x04320 /* Rx Octets Validated */ +#define E1000_LSECRXBAD 0x04324 /* Rx Bad Tag */ +#define E1000_LSECRXNOSCI 0x04328 /* Rx Packet No SCI Count */ +#define E1000_LSECRXUNSCI 0x0432C /* Rx Packet Unknown SCI Count */ +#define E1000_LSECRXUNCH 0x04330 /* Rx Unchecked Packets Count */ +#define E1000_LSECRXDELAY 0x04340 /* Rx Delayed Packet Count */ +#define E1000_LSECRXLATE 0x04350 /* Rx Late Packets Count */ +#define E1000_LSECRXOK(_n) (0x04360 + (0x04 * (_n))) /* Rx Pkt OK Cnt */ +#define E1000_LSECRXINV(_n) (0x04380 + (0x04 * (_n))) /* Rx Invalid Cnt */ +#define E1000_LSECRXNV(_n) (0x043A0 + (0x04 * (_n))) /* Rx Not Valid Cnt */ +#define E1000_LSECRXUNSA 0x043C0 /* Rx Unused SA Count */ +#define E1000_LSECRXNUSA 0x043D0 /* Rx Not Using SA Count */ +#define E1000_LSECTXCAP 0x0B000 /* Tx Capabilities Register - RO */ +#define E1000_LSECRXCAP 0x0B300 /* Rx Capabilities Register - RO */ +#define E1000_LSECTXCTRL 0x0B004 /* Tx Control - RW */ +#define E1000_LSECRXCTRL 0x0B304 /* Rx Control - RW */ +#define E1000_LSECTXSCL 0x0B008 /* Tx SCI Low - RW */ +#define E1000_LSECTXSCH 0x0B00C /* Tx SCI High - RW */ +#define E1000_LSECTXSA 0x0B010 /* Tx SA0 - RW */ +#define E1000_LSECTXPN0 0x0B018 /* Tx SA PN 0 - RW */ +#define E1000_LSECTXPN1 0x0B01C /* Tx SA PN 1 - RW */ +#define E1000_LSECRXSCL 0x0B3D0 /* Rx SCI Low - RW */ +#define E1000_LSECRXSCH 0x0B3E0 /* Rx SCI High - RW */ +/* LinkSec Tx 128-bit Key 0 - WO */ +#define E1000_LSECTXKEY0(_n) (0x0B020 + (0x04 * (_n))) +/* LinkSec Tx 128-bit Key 1 - WO */ +#define E1000_LSECTXKEY1(_n) (0x0B030 + (0x04 * (_n))) +#define E1000_LSECRXSA(_n) (0x0B310 + (0x04 * (_n))) /* Rx SAs - RW */ +#define E1000_LSECRXPN(_n) (0x0B330 + (0x04 * (_n))) /* Rx SAs - RW */ +/* LinkSec Rx Keys - where _n is the SA no. and _m the 4 dwords of the 128 bit + * key - RW. + */ +#define E1000_LSECRXKEY(_n, _m) (0x0B350 + (0x10 * (_n)) + (0x04 * (_m))) + +#define E1000_SSVPC 0x041A0 /* Switch Security Violation Pkt Cnt */ +#define E1000_IPSCTRL 0xB430 /* IpSec Control Register */ +#define E1000_IPSRXCMD 0x0B408 /* IPSec Rx Command Register - RW */ +#define E1000_IPSRXIDX 0x0B400 /* IPSec Rx Index - RW */ +/* IPSec Rx IPv4/v6 Address - RW */ +#define E1000_IPSRXIPADDR(_n) (0x0B420 + (0x04 * (_n))) +/* IPSec Rx 128-bit Key - RW */ +#define E1000_IPSRXKEY(_n) (0x0B410 + (0x04 * (_n))) +#define E1000_IPSRXSALT 0x0B404 /* IPSec Rx Salt - RW */ +#define E1000_IPSRXSPI 0x0B40C /* IPSec Rx SPI - RW */ +/* IPSec Tx 128-bit Key - RW */ +#define E1000_IPSTXKEY(_n) (0x0B460 + (0x04 * (_n))) +#define E1000_IPSTXSALT 0x0B454 /* IPSec Tx Salt - RW */ +#define E1000_IPSTXIDX 0x0B450 /* IPSec Tx SA IDX - RW */ +#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */ +#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */ +#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */ +#define E1000_CBTMPC 0x0402C /* Circuit Breaker Tx Packet Count */ +#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */ +#define E1000_CBRDPC 0x04044 /* Circuit Breaker Rx Dropped Count */ +#define E1000_CBRMPC 0x040FC /* Circuit Breaker Rx Packet Count */ +#define E1000_RPTHC 0x04104 /* Rx Packets To Host */ +#define E1000_HGPTC 0x04118 /* Host Good Packets Tx Count */ +#define E1000_HTCBDPC 0x04124 /* Host Tx Circuit Breaker Dropped Count */ +#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */ +#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */ +#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */ +#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */ +#define E1000_LENERRS 0x04138 /* Length Errors Count */ +#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */ +#define E1000_HRMPC 0x0A018 /* Header Redirection Missed Packet Count */ +#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */ +#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */ +#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */ +#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Pg - RW */ +#define E1000_RXCSUM 0x05000 /* Rx Checksum Control - RW */ +#define E1000_RLPML 0x05004 /* Rx Long Packet Max Length */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ +#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ +#define E1000_RA 0x05400 /* Receive Address - RW Array */ +#define E1000_RA2 0x054E0 /* 2nd half of Rx address array - RW Array */ +#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ +#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */ +#define E1000_CIAA 0x05B88 /* Config Indirect Access Address - RW */ +#define E1000_CIAD 0x05B8C /* Config Indirect Access Data - RW */ +#define E1000_VFQA0 0x0B000 /* VLAN Filter Queue Array 0 - RW Array */ +#define E1000_VFQA1 0x0B200 /* VLAN Filter Queue Array 1 - RW Array */ +#define E1000_WUC 0x05800 /* Wakeup Control - RW */ +#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ +#define E1000_WUS 0x05810 /* Wakeup Status - RO */ +#define E1000_MANC 0x05820 /* Management Control - RW */ +#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ +#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ +#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ +#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ +#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ +#define E1000_PBACL 0x05B68 /* MSIx PBA Clear - Read/Write 1's to clear */ +#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ +#define E1000_HOST_IF 0x08800 /* Host Interface */ +#define E1000_HIBBA 0x8F40 /* Host Interface Buffer Base Address */ +/* Flexible Host Filter Table */ +#define E1000_FHFT(_n) (0x09000 + ((_n) * 0x100)) +/* Ext Flexible Host Filter Table */ +#define E1000_FHFT_EXT(_n) (0x09A00 + ((_n) * 0x100)) + + +#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */ +#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ +/* Management Decision Filters */ +#define E1000_MDEF(_n) (0x05890 + (4 * (_n))) +#define E1000_SW_FW_SYNC 0x05B5C /* SW-FW Synchronization - RW */ +#define E1000_CCMCTL 0x05B48 /* CCM Control Register */ +#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */ +#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */ +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ +#define E1000_GCR2 0x05B64 /* PCI-Ex Control #2 */ +#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ +#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ +#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ +#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ +/* Driver-only SW semaphore (not used by BOOT agents) */ +#define E1000_SWSM2 0x05B58 +#define E1000_DCA_ID 0x05B70 /* DCA Requester ID Information - RO */ +#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */ +#define E1000_UFUSE 0x05B78 /* UFUSE - RO */ +#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ +#define E1000_HICR 0x08F00 /* Host Interface Control */ +#define E1000_FWSTS 0x08F0C /* FW Status */ + +/* RSS registers */ +#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */ +#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate INTR Ext*/ +#define E1000_IMIRVP 0x05AC0 /* Immediate INT Rx VLAN Priority -RW */ +#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4)) /* MSI-X Alloc Reg -RW */ +#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW */ +#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW */ +#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ +#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ +/* VT Registers */ +#define E1000_SWPBS 0x03004 /* Switch Packet Buffer Size - RW */ +#define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */ +#define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */ +#define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */ +#define E1000_VFRE 0x00C8C /* VF Receive Enables */ +#define E1000_VFTE 0x00C90 /* VF Transmit Enables */ +#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */ +#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */ +#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */ +#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */ +#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */ +#define E1000_IOVTCL 0x05BBC /* IOV Control Register */ +#define E1000_VMRCTL 0X05D80 /* Virtual Mirror Rule Control */ +#define E1000_VMRVLAN 0x05D90 /* Virtual Mirror Rule VLAN */ +#define E1000_VMRVM 0x05DA0 /* Virtual Mirror Rule VM */ +#define E1000_MDFB 0x03558 /* Malicious Driver free block */ +#define E1000_LVMMC 0x03548 /* Last VM Misbehavior cause */ +#define E1000_TXSWC 0x05ACC /* Tx Switch Control */ +#define E1000_SCCRL 0x05DB0 /* Storm Control Control */ +#define E1000_BSCTRH 0x05DB8 /* Broadcast Storm Control Threshold */ +#define E1000_MSCTRH 0x05DBC /* Multicast Storm Control Threshold */ +/* These act per VF so an array friendly macro is used */ +#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n))) +#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n))) +#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n))) +#define E1000_VFVMBMEM(_n) (0x00800 + (_n)) +#define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n))) +/* VLAN Virtual Machine Filter - RW */ +#define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) +#define E1000_VMVIR(_n) (0x03700 + (4 * (_n))) +#define E1000_DVMOLR(_n) (0x0C038 + (0x40 * (_n))) /* DMA VM offload */ +#define E1000_VTCTRL(_n) (0x10000 + (0x100 * (_n))) /* VT Control */ +#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ +#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */ +#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */ +#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */ +#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */ +#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */ +#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */ +#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */ +#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */ +#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */ +#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */ +#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */ +#define E1000_TIMADJL 0x0B60C /* Time sync time adjustment offset Low - RW */ +#define E1000_TIMADJH 0x0B610 /* Time sync time adjustment offset High - RW */ +#define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */ +#define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */ +#define E1000_TSICR 0x0B66C /* Interrupt Cause Register */ +#define E1000_TSIM 0x0B674 /* Interrupt Mask Register */ + +/* Filtering Registers */ +#define E1000_SAQF(_n) (0x05980 + (4 * (_n))) /* Source Address Queue Fltr */ +#define E1000_DAQF(_n) (0x059A0 + (4 * (_n))) /* Dest Address Queue Fltr */ +#define E1000_SPQF(_n) (0x059C0 + (4 * (_n))) /* Source Port Queue Fltr */ +#define E1000_FTQF(_n) (0x059E0 + (4 * (_n))) /* 5-tuple Queue Fltr */ +#define E1000_TTQF(_n) (0x059E0 + (4 * (_n))) /* 2-tuple Queue Fltr */ +#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */ +#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */ + +#define E1000_RTTDCS 0x3600 /* Reedtown Tx Desc plane control and status */ +#define E1000_RTTPCS 0x3474 /* Reedtown Tx Packet Plane control and status */ +#define E1000_RTRPCS 0x2474 /* Rx packet plane control and status */ +#define E1000_RTRUP2TC 0x05AC4 /* Rx User Priority to Traffic Class */ +#define E1000_RTTUP2TC 0x0418 /* Transmit User Priority to Traffic Class */ +/* Tx Desc plane TC Rate-scheduler config */ +#define E1000_RTTDTCRC(_n) (0x3610 + ((_n) * 4)) +/* Tx Packet plane TC Rate-Scheduler Config */ +#define E1000_RTTPTCRC(_n) (0x3480 + ((_n) * 4)) +/* Rx Packet plane TC Rate-Scheduler Config */ +#define E1000_RTRPTCRC(_n) (0x2480 + ((_n) * 4)) +/* Tx Desc Plane TC Rate-Scheduler Status */ +#define E1000_RTTDTCRS(_n) (0x3630 + ((_n) * 4)) +/* Tx Desc Plane TC Rate-Scheduler MMW */ +#define E1000_RTTDTCRM(_n) (0x3650 + ((_n) * 4)) +/* Tx Packet plane TC Rate-Scheduler Status */ +#define E1000_RTTPTCRS(_n) (0x34A0 + ((_n) * 4)) +/* Tx Packet plane TC Rate-scheduler MMW */ +#define E1000_RTTPTCRM(_n) (0x34C0 + ((_n) * 4)) +/* Rx Packet plane TC Rate-Scheduler Status */ +#define E1000_RTRPTCRS(_n) (0x24A0 + ((_n) * 4)) +/* Rx Packet plane TC Rate-Scheduler MMW */ +#define E1000_RTRPTCRM(_n) (0x24C0 + ((_n) * 4)) +/* Tx Desc plane VM Rate-Scheduler MMW*/ +#define E1000_RTTDVMRM(_n) (0x3670 + ((_n) * 4)) +/* Tx BCN Rate-Scheduler MMW */ +#define E1000_RTTBCNRM(_n) (0x3690 + ((_n) * 4)) +#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select */ +#define E1000_RTTDVMRC 0x3608 /* Tx Desc Plane VM Rate-Scheduler Config */ +#define E1000_RTTDVMRS 0x360C /* Tx Desc Plane VM Rate-Scheduler Status */ +#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config */ +#define E1000_RTTBCNRS 0x36B4 /* Tx BCN Rate-Scheduler Status */ +#define E1000_RTTBCNCR 0xB200 /* Tx BCN Control Register */ +#define E1000_RTTBCNTG 0x35A4 /* Tx BCN Tagging */ +#define E1000_RTTBCNCP 0xB208 /* Tx BCN Congestion point */ +#define E1000_RTRBCNCR 0xB20C /* Rx BCN Control Register */ +#define E1000_RTTBCNRD 0x36B8 /* Tx BCN Rate Drift */ +#define E1000_PFCTOP 0x1080 /* Priority Flow Control Type and Opcode */ +#define E1000_RTTBCNIDX 0xB204 /* Tx BCN Congestion Point */ +#define E1000_RTTBCNACH 0x0B214 /* Tx BCN Control High */ +#define E1000_RTTBCNACL 0x0B210 /* Tx BCN Control Low */ + +/* DMA Coalescing registers */ +#define E1000_DMACR 0x02508 /* Control Register */ +#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */ +#define E1000_DMCTLX 0x02514 /* Time to Lx Request */ +#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */ +#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */ +#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */ +#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */ + +/* PCIe Parity Status Register */ +#define E1000_PCIEERRSTS 0x05BA8 + +#define E1000_PROXYS 0x5F64 /* Proxying Status */ +#define E1000_PROXYFC 0x5F60 /* Proxying Filter Control */ +/* Thermal sensor configuration and status registers */ +#define E1000_THMJT 0x08100 /* Junction Temperature */ +#define E1000_THLOWTC 0x08104 /* Low Threshold Control */ +#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */ +#define E1000_THHIGHTC 0x0810C /* High Threshold Control */ +#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ + +/* Energy Efficient Ethernet "EEE" registers */ +#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */ +#define E1000_LTRC 0x01A0 /* Latency Tolerance Reporting Control */ +#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet "EEE"*/ +#define E1000_EEE_SU 0x0E34 /* EEE Setup */ +#define E1000_TLPIC 0x4148 /* EEE Tx LPI Count - TLPIC */ +#define E1000_RLPIC 0x414C /* EEE Rx LPI Count - RLPIC */ + +/* OS2BMC Registers */ +#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */ +#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */ +#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */ +#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */ + + + +#endif Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_regs.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_vf.c =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_vf.c (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_vf.c (revision 291673) @@ -0,0 +1,585 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + + +#include "e1000_api.h" + + +static s32 e1000_init_phy_params_vf(struct e1000_hw *hw); +static s32 e1000_init_nvm_params_vf(struct e1000_hw *hw); +static void e1000_release_vf(struct e1000_hw *hw); +static s32 e1000_acquire_vf(struct e1000_hw *hw); +static s32 e1000_setup_link_vf(struct e1000_hw *hw); +static s32 e1000_get_bus_info_pcie_vf(struct e1000_hw *hw); +static s32 e1000_init_mac_params_vf(struct e1000_hw *hw); +static s32 e1000_check_for_link_vf(struct e1000_hw *hw); +static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +static s32 e1000_init_hw_vf(struct e1000_hw *hw); +static s32 e1000_reset_hw_vf(struct e1000_hw *hw); +static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *, u32); +static int e1000_rar_set_vf(struct e1000_hw *, u8 *, u32); +static s32 e1000_read_mac_addr_vf(struct e1000_hw *); + +/** + * e1000_init_phy_params_vf - Inits PHY params + * @hw: pointer to the HW structure + * + * Doesn't do much - there's no PHY available to the VF. + **/ +static s32 e1000_init_phy_params_vf(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_init_phy_params_vf"); + hw->phy.type = e1000_phy_vf; + hw->phy.ops.acquire = e1000_acquire_vf; + hw->phy.ops.release = e1000_release_vf; + + return E1000_SUCCESS; +} + +/** + * e1000_init_nvm_params_vf - Inits NVM params + * @hw: pointer to the HW structure + * + * Doesn't do much - there's no NVM available to the VF. + **/ +static s32 e1000_init_nvm_params_vf(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_init_nvm_params_vf"); + hw->nvm.type = e1000_nvm_none; + hw->nvm.ops.acquire = e1000_acquire_vf; + hw->nvm.ops.release = e1000_release_vf; + + return E1000_SUCCESS; +} + +/** + * e1000_init_mac_params_vf - Inits MAC params + * @hw: pointer to the HW structure + **/ +static s32 e1000_init_mac_params_vf(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + DEBUGFUNC("e1000_init_mac_params_vf"); + + /* Set media type */ + /* + * Virtual functions don't care what they're media type is as they + * have no direct access to the PHY, or the media. That is handled + * by the physical function driver. + */ + hw->phy.media_type = e1000_media_type_unknown; + + /* No ASF features for the VF driver */ + mac->asf_firmware_present = FALSE; + /* ARC subsystem not supported */ + mac->arc_subsystem_valid = FALSE; + /* Disable adaptive IFS mode so the generic funcs don't do anything */ + mac->adaptive_ifs = FALSE; + /* VF's have no MTA Registers - PF feature only */ + mac->mta_reg_count = 128; + /* VF's have no access to RAR entries */ + mac->rar_entry_count = 1; + + /* Function pointers */ + /* link setup */ + mac->ops.setup_link = e1000_setup_link_vf; + /* bus type/speed/width */ + mac->ops.get_bus_info = e1000_get_bus_info_pcie_vf; + /* reset */ + mac->ops.reset_hw = e1000_reset_hw_vf; + /* hw initialization */ + mac->ops.init_hw = e1000_init_hw_vf; + /* check for link */ + mac->ops.check_for_link = e1000_check_for_link_vf; + /* link info */ + mac->ops.get_link_up_info = e1000_get_link_up_info_vf; + /* multicast address update */ + mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_vf; + /* set mac address */ + mac->ops.rar_set = e1000_rar_set_vf; + /* read mac address */ + mac->ops.read_mac_addr = e1000_read_mac_addr_vf; + + + return E1000_SUCCESS; +} + +/** + * e1000_init_function_pointers_vf - Inits function pointers + * @hw: pointer to the HW structure + **/ +void e1000_init_function_pointers_vf(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_init_function_pointers_vf"); + + hw->mac.ops.init_params = e1000_init_mac_params_vf; + hw->nvm.ops.init_params = e1000_init_nvm_params_vf; + hw->phy.ops.init_params = e1000_init_phy_params_vf; + hw->mbx.ops.init_params = e1000_init_mbx_params_vf; +} + +/** + * e1000_acquire_vf - Acquire rights to access PHY or NVM. + * @hw: pointer to the HW structure + * + * There is no PHY or NVM so we want all attempts to acquire these to fail. + * In addition, the MAC registers to access PHY/NVM don't exist so we don't + * even want any SW to attempt to use them. + **/ +static s32 e1000_acquire_vf(struct e1000_hw E1000_UNUSEDARG *hw) +{ + return -E1000_ERR_PHY; +} + +/** + * e1000_release_vf - Release PHY or NVM + * @hw: pointer to the HW structure + * + * There is no PHY or NVM so we want all attempts to acquire these to fail. + * In addition, the MAC registers to access PHY/NVM don't exist so we don't + * even want any SW to attempt to use them. + **/ +static void e1000_release_vf(struct e1000_hw E1000_UNUSEDARG *hw) +{ + return; +} + +/** + * e1000_setup_link_vf - Sets up link. + * @hw: pointer to the HW structure + * + * Virtual functions cannot change link. + **/ +static s32 e1000_setup_link_vf(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_setup_link_vf"); + + return E1000_SUCCESS; +} + +/** + * e1000_get_bus_info_pcie_vf - Gets the bus info. + * @hw: pointer to the HW structure + * + * Virtual functions are not really on their own bus. + **/ +static s32 e1000_get_bus_info_pcie_vf(struct e1000_hw *hw) +{ + struct e1000_bus_info *bus = &hw->bus; + + DEBUGFUNC("e1000_get_bus_info_pcie_vf"); + + /* Do not set type PCI-E because we don't want disable master to run */ + bus->type = e1000_bus_type_reserved; + bus->speed = e1000_bus_speed_2500; + + return 0; +} + +/** + * e1000_get_link_up_info_vf - Gets link info. + * @hw: pointer to the HW structure + * @speed: pointer to 16 bit value to store link speed. + * @duplex: pointer to 16 bit value to store duplex. + * + * Since we cannot read the PHY and get accurate link info, we must rely upon + * the status register's data which is often stale and inaccurate. + **/ +static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + s32 status; + + DEBUGFUNC("e1000_get_link_up_info_vf"); + + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_SPEED_1000) { + *speed = SPEED_1000; + DEBUGOUT("1000 Mbs, "); + } else if (status & E1000_STATUS_SPEED_100) { + *speed = SPEED_100; + DEBUGOUT("100 Mbs, "); + } else { + *speed = SPEED_10; + DEBUGOUT("10 Mbs, "); + } + + if (status & E1000_STATUS_FD) { + *duplex = FULL_DUPLEX; + DEBUGOUT("Full Duplex\n"); + } else { + *duplex = HALF_DUPLEX; + DEBUGOUT("Half Duplex\n"); + } + + return E1000_SUCCESS; +} + +/** + * e1000_reset_hw_vf - Resets the HW + * @hw: pointer to the HW structure + * + * VF's provide a function level reset. This is done using bit 26 of ctrl_reg. + * This is all the reset we can perform on a VF. + **/ +static s32 e1000_reset_hw_vf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 timeout = E1000_VF_INIT_TIMEOUT; + s32 ret_val = -E1000_ERR_MAC_INIT; + u32 ctrl, msgbuf[3]; + u8 *addr = (u8 *)(&msgbuf[1]); + + DEBUGFUNC("e1000_reset_hw_vf"); + + DEBUGOUT("Issuing a function level reset to MAC\n"); + ctrl = E1000_READ_REG(hw, E1000_CTRL); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST); + + /* we cannot reset while the RSTI / RSTD bits are asserted */ + while (!mbx->ops.check_for_rst(hw, 0) && timeout) { + timeout--; + usec_delay(5); + } + + if (timeout) { + /* mailbox timeout can now become active */ + mbx->timeout = E1000_VF_MBX_INIT_TIMEOUT; + + msgbuf[0] = E1000_VF_RESET; + mbx->ops.write_posted(hw, msgbuf, 1, 0); + + msec_delay(10); + + /* set our "perm_addr" based on info provided by PF */ + ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0); + if (!ret_val) { + if (msgbuf[0] == (E1000_VF_RESET | + E1000_VT_MSGTYPE_ACK)) + memcpy(hw->mac.perm_addr, addr, 6); + else + ret_val = -E1000_ERR_MAC_INIT; + } + } + + return ret_val; +} + +/** + * e1000_init_hw_vf - Inits the HW + * @hw: pointer to the HW structure + * + * Not much to do here except clear the PF Reset indication if there is one. + **/ +static s32 e1000_init_hw_vf(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_init_hw_vf"); + + /* attempt to set and restore our mac address */ + e1000_rar_set_vf(hw, hw->mac.addr, 0); + + return E1000_SUCCESS; +} + +/** + * e1000_rar_set_vf - set device MAC address + * @hw: pointer to the HW structure + * @addr: pointer to the receive address + * @index receive address array register + **/ +static int e1000_rar_set_vf(struct e1000_hw *hw, u8 *addr, + u32 E1000_UNUSEDARG index) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[3]; + u8 *msg_addr = (u8 *)(&msgbuf[1]); + s32 ret_val; + + memset(msgbuf, 0, 12); + msgbuf[0] = E1000_VF_SET_MAC_ADDR; + memcpy(msg_addr, addr, 6); + ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0); + + if (!ret_val) + ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0); + + msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS; + + /* if nacked the address was rejected, use "perm_addr" */ + if (!ret_val && + (msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK))) + e1000_read_mac_addr_vf(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_hash_mc_addr_vf - Generate a multicast hash value + * @hw: pointer to the HW structure + * @mc_addr: pointer to a multicast address + * + * Generates a multicast address hash value which is used to determine + * the multicast filter table array address and new table value. + **/ +static u32 e1000_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr) +{ + u32 hash_value, hash_mask; + u8 bit_shift = 0; + + DEBUGFUNC("e1000_hash_mc_addr_generic"); + + /* Register count multiplied by bits per register */ + hash_mask = (hw->mac.mta_reg_count * 32) - 1; + + /* + * The bit_shift is the number of left-shifts + * where 0xFF would still fall within the hash mask. + */ + while (hash_mask >> bit_shift != 0xFF) + bit_shift++; + + hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | + (((u16) mc_addr[5]) << bit_shift))); + + return hash_value; +} + +static void e1000_write_msg_read_ack(struct e1000_hw *hw, + u32 *msg, u16 size) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 retmsg[E1000_VFMAILBOX_SIZE]; + s32 retval = mbx->ops.write_posted(hw, msg, size, 0); + + if (!retval) + mbx->ops.read_posted(hw, retmsg, E1000_VFMAILBOX_SIZE, 0); +} + +/** + * e1000_update_mc_addr_list_vf - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * + * Updates the Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + **/ +void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count) +{ + u32 msgbuf[E1000_VFMAILBOX_SIZE]; + u16 *hash_list = (u16 *)&msgbuf[1]; + u32 hash_value; + u32 i; + + DEBUGFUNC("e1000_update_mc_addr_list_vf"); + + /* Each entry in the list uses 1 16 bit word. We have 30 + * 16 bit words available in our HW msg buffer (minus 1 for the + * msg type). That's 30 hash values if we pack 'em right. If + * there are more than 30 MC addresses to add then punt the + * extras for now and then add code to handle more than 30 later. + * It would be unusual for a server to request that many multi-cast + * addresses except for in large enterprise network environments. + */ + + DEBUGOUT1("MC Addr Count = %d\n", mc_addr_count); + + if (mc_addr_count > 30) { + msgbuf[0] |= E1000_VF_SET_MULTICAST_OVERFLOW; + mc_addr_count = 30; + } + + msgbuf[0] = E1000_VF_SET_MULTICAST; + msgbuf[0] |= mc_addr_count << E1000_VT_MSGINFO_SHIFT; + + for (i = 0; i < mc_addr_count; i++) { + hash_value = e1000_hash_mc_addr_vf(hw, mc_addr_list); + DEBUGOUT1("Hash value = 0x%03X\n", hash_value); + hash_list[i] = hash_value & 0x0FFF; + mc_addr_list += ETH_ADDR_LEN; + } + + e1000_write_msg_read_ack(hw, msgbuf, E1000_VFMAILBOX_SIZE); +} + +/** + * e1000_vfta_set_vf - Set/Unset vlan filter table address + * @hw: pointer to the HW structure + * @vid: determines the vfta register and bit to set/unset + * @set: if TRUE then set bit, else clear bit + **/ +void e1000_vfta_set_vf(struct e1000_hw *hw, u16 vid, bool set) +{ + u32 msgbuf[2]; + + msgbuf[0] = E1000_VF_SET_VLAN; + msgbuf[1] = vid; + /* Setting the 8 bit field MSG INFO to TRUE indicates "add" */ + if (set) + msgbuf[0] |= E1000_VF_SET_VLAN_ADD; + + e1000_write_msg_read_ack(hw, msgbuf, 2); +} + +/** e1000_rlpml_set_vf - Set the maximum receive packet length + * @hw: pointer to the HW structure + * @max_size: value to assign to max frame size + **/ +void e1000_rlpml_set_vf(struct e1000_hw *hw, u16 max_size) +{ + u32 msgbuf[2]; + + msgbuf[0] = E1000_VF_SET_LPE; + msgbuf[1] = max_size; + + e1000_write_msg_read_ack(hw, msgbuf, 2); +} + +/** + * e1000_promisc_set_vf - Set flags for Unicast or Multicast promisc + * @hw: pointer to the HW structure + * @uni: boolean indicating unicast promisc status + * @multi: boolean indicating multicast promisc status + **/ +s32 e1000_promisc_set_vf(struct e1000_hw *hw, enum e1000_promisc_type type) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf = E1000_VF_SET_PROMISC; + s32 ret_val; + + switch (type) { + case e1000_promisc_multicast: + msgbuf |= E1000_VF_SET_PROMISC_MULTICAST; + break; + case e1000_promisc_enabled: + msgbuf |= E1000_VF_SET_PROMISC_MULTICAST; + case e1000_promisc_unicast: + msgbuf |= E1000_VF_SET_PROMISC_UNICAST; + case e1000_promisc_disabled: + break; + default: + return -E1000_ERR_MAC_INIT; + } + + ret_val = mbx->ops.write_posted(hw, &msgbuf, 1, 0); + + if (!ret_val) + ret_val = mbx->ops.read_posted(hw, &msgbuf, 1, 0); + + if (!ret_val && !(msgbuf & E1000_VT_MSGTYPE_ACK)) + ret_val = -E1000_ERR_MAC_INIT; + + return ret_val; +} + +/** + * e1000_read_mac_addr_vf - Read device MAC address + * @hw: pointer to the HW structure + **/ +static s32 e1000_read_mac_addr_vf(struct e1000_hw *hw) +{ + int i; + + for (i = 0; i < ETH_ADDR_LEN; i++) + hw->mac.addr[i] = hw->mac.perm_addr[i]; + + return E1000_SUCCESS; +} + +/** + * e1000_check_for_link_vf - Check for link for a virtual interface + * @hw: pointer to the HW structure + * + * Checks to see if the underlying PF is still talking to the VF and + * if it is then it reports the link state to the hardware, otherwise + * it reports link down and returns an error. + **/ +static s32 e1000_check_for_link_vf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val = E1000_SUCCESS; + u32 in_msg = 0; + + DEBUGFUNC("e1000_check_for_link_vf"); + + /* + * We only want to run this if there has been a rst asserted. + * in this case that could mean a link change, device reset, + * or a virtual function reset + */ + + /* If we were hit with a reset or timeout drop the link */ + if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout) + mac->get_link_status = TRUE; + + if (!mac->get_link_status) + goto out; + + /* if link status is down no point in checking to see if pf is up */ + if (!(E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) + goto out; + + /* if the read failed it could just be a mailbox collision, best wait + * until we are called again and don't report an error */ + if (mbx->ops.read(hw, &in_msg, 1, 0)) + goto out; + + /* if incoming message isn't clear to send we are waiting on response */ + if (!(in_msg & E1000_VT_MSGTYPE_CTS)) { + /* message is not CTS and is NACK we have lost CTS status */ + if (in_msg & E1000_VT_MSGTYPE_NACK) + ret_val = -E1000_ERR_MAC_INIT; + goto out; + } + + /* at this point we know the PF is talking to us, check and see if + * we are still accepting timeout or if we had a timeout failure. + * if we failed then we will need to reinit */ + if (!mbx->timeout) { + ret_val = -E1000_ERR_MAC_INIT; + goto out; + } + + /* if we passed all the tests above then the link is up and we no + * longer need to check for link */ + mac->get_link_status = FALSE; + +out: + return ret_val; +} + Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_vf.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_vf.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/e1000_vf.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/e1000_vf.h (revision 291673) @@ -0,0 +1,296 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _E1000_VF_H_ +#define _E1000_VF_H_ + +#include "e1000_osdep.h" +#include "e1000_regs.h" +#include "e1000_defines.h" + +struct e1000_hw; + +#define E1000_DEV_ID_82576_VF 0x10CA +#define E1000_DEV_ID_I350_VF 0x1520 + +#define E1000_VF_INIT_TIMEOUT 200 /* Num of retries to clear RSTI */ + +/* Additional Descriptor Control definitions */ +#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Tx Queue */ +#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Rx Queue */ + +/* SRRCTL bit definitions */ +#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \ + (0x0C00C + ((_n) * 0x40))) +#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ +#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00 +#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */ +#define E1000_SRRCTL_DESCTYPE_LEGACY 0x00000000 +#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 +#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION 0x06000000 +#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000 +#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000 +#define E1000_SRRCTL_DROP_EN 0x80000000 + +#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F +#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00 + +/* Interrupt Defines */ +#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ +#define E1000_EITR(_n) (0x01680 + ((_n) << 2)) +#define E1000_EICS 0x01520 /* Ext. Intr Cause Set -W0 */ +#define E1000_EIMS 0x01524 /* Ext. Intr Mask Set/Read -RW */ +#define E1000_EIMC 0x01528 /* Ext. Intr Mask Clear -WO */ +#define E1000_EIAC 0x0152C /* Ext. Intr Auto Clear -RW */ +#define E1000_EIAM 0x01530 /* Ext. Intr Ack Auto Clear Mask -RW */ +#define E1000_IVAR0 0x01700 /* Intr Vector Alloc (array) -RW */ +#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes -RW */ +#define E1000_IVAR_VALID 0x80 + +/* Receive Descriptor - Advanced */ +union e1000_adv_rx_desc { + struct { + u64 pkt_addr; /* Packet buffer address */ + u64 hdr_addr; /* Header buffer address */ + } read; + struct { + struct { + union { + u32 data; + struct { + /* RSS type, Packet type */ + u16 pkt_info; + /* Split Header, header buffer len */ + u16 hdr_info; + } hs_rss; + } lo_dword; + union { + u32 rss; /* RSS Hash */ + struct { + u16 ip_id; /* IP id */ + u16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + u32 status_error; /* ext status/error */ + u16 length; /* Packet length */ + u16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0 +#define E1000_RXDADV_HDRBUFLEN_SHIFT 5 + +/* Transmit Descriptor - Advanced */ +union e1000_adv_tx_desc { + struct { + u64 buffer_addr; /* Address of descriptor's data buf */ + u32 cmd_type_len; + u32 olinfo_status; + } read; + struct { + u64 rsvd; /* Reserved */ + u32 nxtseq_seed; + u32 status; + } wb; +}; + +/* Adv Transmit Descriptor Config Masks */ +#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ +#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ +#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */ +#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */ +#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */ +#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */ +#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ +#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ + +/* Context descriptors */ +struct e1000_adv_tx_context_desc { + u32 vlan_macip_lens; + u32 seqnum_seed; + u32 type_tucmd_mlhl; + u32 mss_l4len_idx; +}; + +#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ +#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ +#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ +#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ + +enum e1000_mac_type { + e1000_undefined = 0, + e1000_vfadapt, + e1000_vfadapt_i350, + e1000_num_macs /* List is 1-based, so subtract 1 for TRUE count. */ +}; + +struct e1000_vf_stats { + u64 base_gprc; + u64 base_gptc; + u64 base_gorc; + u64 base_gotc; + u64 base_mprc; + u64 base_gotlbc; + u64 base_gptlbc; + u64 base_gorlbc; + u64 base_gprlbc; + + u32 last_gprc; + u32 last_gptc; + u32 last_gorc; + u32 last_gotc; + u32 last_mprc; + u32 last_gotlbc; + u32 last_gptlbc; + u32 last_gorlbc; + u32 last_gprlbc; + + u64 gprc; + u64 gptc; + u64 gorc; + u64 gotc; + u64 mprc; + u64 gotlbc; + u64 gptlbc; + u64 gorlbc; + u64 gprlbc; +}; + +#include "e1000_mbx.h" + +struct e1000_mac_operations { + /* Function pointers for the MAC. */ + s32 (*init_params)(struct e1000_hw *); + s32 (*check_for_link)(struct e1000_hw *); + void (*clear_vfta)(struct e1000_hw *); + s32 (*get_bus_info)(struct e1000_hw *); + s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *); + void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32); + s32 (*reset_hw)(struct e1000_hw *); + s32 (*init_hw)(struct e1000_hw *); + s32 (*setup_link)(struct e1000_hw *); + void (*write_vfta)(struct e1000_hw *, u32, u32); + int (*rar_set)(struct e1000_hw *, u8*, u32); + s32 (*read_mac_addr)(struct e1000_hw *); +}; + +struct e1000_mac_info { + struct e1000_mac_operations ops; + u8 addr[6]; + u8 perm_addr[6]; + + enum e1000_mac_type type; + + u16 mta_reg_count; + u16 rar_entry_count; + + bool get_link_status; +}; + +struct e1000_mbx_operations { + s32 (*init_params)(struct e1000_hw *hw); + s32 (*read)(struct e1000_hw *, u32 *, u16, u16); + s32 (*write)(struct e1000_hw *, u32 *, u16, u16); + s32 (*read_posted)(struct e1000_hw *, u32 *, u16, u16); + s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16); + s32 (*check_for_msg)(struct e1000_hw *, u16); + s32 (*check_for_ack)(struct e1000_hw *, u16); + s32 (*check_for_rst)(struct e1000_hw *, u16); +}; + +struct e1000_mbx_stats { + u32 msgs_tx; + u32 msgs_rx; + + u32 acks; + u32 reqs; + u32 rsts; +}; + +struct e1000_mbx_info { + struct e1000_mbx_operations ops; + struct e1000_mbx_stats stats; + u32 timeout; + u32 usec_delay; + u16 size; +}; + +struct e1000_dev_spec_vf { + u32 vf_number; + u32 v2p_mailbox; +}; + +struct e1000_hw { + void *back; + + u8 *hw_addr; + u8 *flash_address; + unsigned long io_base; + + struct e1000_mac_info mac; + struct e1000_mbx_info mbx; + + union { + struct e1000_dev_spec_vf vf; + } dev_spec; + + u16 device_id; + u16 subsystem_vendor_id; + u16 subsystem_device_id; + u16 vendor_id; + + u8 revision_id; +}; + +enum e1000_promisc_type { + e1000_promisc_disabled = 0, /* all promisc modes disabled */ + e1000_promisc_unicast = 1, /* unicast promiscuous enabled */ + e1000_promisc_multicast = 2, /* multicast promiscuous enabled */ + e1000_promisc_enabled = 3, /* both uni and multicast promisc */ + e1000_num_promisc_types +}; + +/* These functions must be implemented by drivers */ +s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); +void e1000_vfta_set_vf(struct e1000_hw *, u16, bool); +void e1000_rlpml_set_vf(struct e1000_hw *, u16); +s32 e1000_promisc_set_vf(struct e1000_hw *, enum e1000_promisc_type); +#endif /* _E1000_VF_H_ */ Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/e1000_vf.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/if_igb.c =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/if_igb.c (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/if_igb.c (revision 291673) @@ -0,0 +1,6130 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + + +#ifdef HAVE_KERNEL_OPTION_HEADERS +#include "opt_device_polling.h" +#include "opt_inet.h" +#include "opt_inet6.h" +#include "opt_altq.h" +#endif + +#include +#include +#ifndef IGB_LEGACY_TX +#include +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "e1000_api.h" +#include "e1000_82575.h" +#include "if_igb.h" + +/********************************************************************* + * Set this to one to display debug statistics + *********************************************************************/ +int igb_display_debug_stats = 0; + +/********************************************************************* + * Driver version: + *********************************************************************/ +char igb_driver_version[] = "version - 2.4.3"; + + +/********************************************************************* + * PCI Device ID Table + * + * Used by probe to select devices to load on + * Last field stores an index into e1000_strings + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index } + *********************************************************************/ + +static igb_vendor_info_t igb_vendor_info_array[] = +{ + { 0x8086, E1000_DEV_ID_82575EB_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82575EB_FIBER_SERDES, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82575GB_QUAD_COPPER, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82576, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82576_NS, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82576_NS_SERDES, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82576_FIBER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82576_SERDES, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82576_SERDES_QUAD, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82576_QUAD_COPPER, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82576_QUAD_COPPER_ET2, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82576_VF, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82580_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82580_FIBER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82580_SERDES, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82580_SGMII, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82580_COPPER_DUAL, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_82580_QUAD_FIBER, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_DH89XXCC_SERDES, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_DH89XXCC_SGMII, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_DH89XXCC_SFP, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_DH89XXCC_BACKPLANE, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I350_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I350_FIBER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I350_SERDES, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I350_SGMII, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I350_VF, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I210_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I210_COPPER_IT, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I210_COPPER_OEM1, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I210_COPPER_FLASHLESS, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I210_SERDES_FLASHLESS, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I210_FIBER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I210_SERDES, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I210_SGMII, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I211_COPPER, PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I354_BACKPLANE_1GBPS, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS, + PCI_ANY_ID, PCI_ANY_ID, 0}, + { 0x8086, E1000_DEV_ID_I354_SGMII, PCI_ANY_ID, PCI_ANY_ID, 0}, + /* required last entry */ + { 0, 0, 0, 0, 0} +}; + +/********************************************************************* + * Table of branding strings for all supported NICs. + *********************************************************************/ + +static char *igb_strings[] = { + "Intel(R) PRO/1000 Network Connection" +}; + +/********************************************************************* + * Function prototypes + *********************************************************************/ +static int igb_probe(device_t); +static int igb_attach(device_t); +static int igb_detach(device_t); +static int igb_shutdown(device_t); +static int igb_suspend(device_t); +static int igb_resume(device_t); +#ifndef IGB_LEGACY_TX +static int igb_mq_start(struct ifnet *, struct mbuf *); +static int igb_mq_start_locked(struct ifnet *, struct tx_ring *); +static void igb_qflush(struct ifnet *); +static void igb_deferred_mq_start(void *, int); +#else +static void igb_start(struct ifnet *); +static void igb_start_locked(struct tx_ring *, struct ifnet *ifp); +#endif +static int igb_ioctl(struct ifnet *, u_long, caddr_t); +static void igb_init(void *); +static void igb_init_locked(struct adapter *); +static void igb_stop(void *); +static void igb_media_status(struct ifnet *, struct ifmediareq *); +static int igb_media_change(struct ifnet *); +static void igb_identify_hardware(struct adapter *); +static int igb_allocate_pci_resources(struct adapter *); +static int igb_allocate_msix(struct adapter *); +static int igb_allocate_legacy(struct adapter *); +static int igb_setup_msix(struct adapter *); +static void igb_free_pci_resources(struct adapter *); +static void igb_local_timer(void *); +static void igb_reset(struct adapter *); +static int igb_setup_interface(device_t, struct adapter *); +static int igb_allocate_queues(struct adapter *); +static void igb_configure_queues(struct adapter *); + +static int igb_allocate_transmit_buffers(struct tx_ring *); +static void igb_setup_transmit_structures(struct adapter *); +static void igb_setup_transmit_ring(struct tx_ring *); +static void igb_initialize_transmit_units(struct adapter *); +static void igb_free_transmit_structures(struct adapter *); +static void igb_free_transmit_buffers(struct tx_ring *); + +static int igb_allocate_receive_buffers(struct rx_ring *); +static int igb_setup_receive_structures(struct adapter *); +static int igb_setup_receive_ring(struct rx_ring *); +static void igb_initialize_receive_units(struct adapter *); +static void igb_free_receive_structures(struct adapter *); +static void igb_free_receive_buffers(struct rx_ring *); +static void igb_free_receive_ring(struct rx_ring *); + +static void igb_enable_intr(struct adapter *); +static void igb_disable_intr(struct adapter *); +static void igb_update_stats_counters(struct adapter *); +static bool igb_txeof(struct tx_ring *); + +static __inline void igb_rx_discard(struct rx_ring *, int); +static __inline void igb_rx_input(struct rx_ring *, + struct ifnet *, struct mbuf *, u32); + +static bool igb_rxeof(struct igb_queue *, int, int *); +static void igb_rx_checksum(u32, struct mbuf *, u32); +static int igb_tx_ctx_setup(struct tx_ring *, + struct mbuf *, u32 *, u32 *); +static int igb_tso_setup(struct tx_ring *, + struct mbuf *, u32 *, u32 *); +static void igb_set_promisc(struct adapter *); +static void igb_disable_promisc(struct adapter *); +static void igb_set_multi(struct adapter *); +static void igb_update_link_status(struct adapter *); +static void igb_refresh_mbufs(struct rx_ring *, int); + +static void igb_register_vlan(void *, struct ifnet *, u16); +static void igb_unregister_vlan(void *, struct ifnet *, u16); +static void igb_setup_vlan_hw_support(struct adapter *); + +static int igb_xmit(struct tx_ring *, struct mbuf **); +static int igb_dma_malloc(struct adapter *, bus_size_t, + struct igb_dma_alloc *, int); +static void igb_dma_free(struct adapter *, struct igb_dma_alloc *); +static int igb_sysctl_nvm_info(SYSCTL_HANDLER_ARGS); +static void igb_print_nvm_info(struct adapter *); +static int igb_is_valid_ether_addr(u8 *); +static void igb_add_hw_stats(struct adapter *); + +static void igb_vf_init_stats(struct adapter *); +static void igb_update_vf_stats_counters(struct adapter *); + +/* Management and WOL Support */ +static void igb_init_manageability(struct adapter *); +static void igb_release_manageability(struct adapter *); +static void igb_get_hw_control(struct adapter *); +static void igb_release_hw_control(struct adapter *); +static void igb_enable_wakeup(device_t); +static void igb_led_func(void *, int); + +static int igb_irq_fast(void *); +static void igb_msix_que(void *); +static void igb_msix_link(void *); +static void igb_handle_que(void *context, int pending); +static void igb_handle_link(void *context, int pending); +static void igb_handle_link_locked(struct adapter *); + +static void igb_set_sysctl_value(struct adapter *, const char *, + const char *, int *, int); +static int igb_set_flowcntl(SYSCTL_HANDLER_ARGS); +static int igb_sysctl_dmac(SYSCTL_HANDLER_ARGS); +static int igb_sysctl_eee(SYSCTL_HANDLER_ARGS); + +#ifdef DEVICE_POLLING +static poll_handler_t igb_poll; +#endif /* POLLING */ + +/********************************************************************* + * FreeBSD Device Interface Entry Points + *********************************************************************/ + +static device_method_t igb_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, igb_probe), + DEVMETHOD(device_attach, igb_attach), + DEVMETHOD(device_detach, igb_detach), + DEVMETHOD(device_shutdown, igb_shutdown), + DEVMETHOD(device_suspend, igb_suspend), + DEVMETHOD(device_resume, igb_resume), + DEVMETHOD_END +}; + +static driver_t igb_driver = { + "igb", igb_methods, sizeof(struct adapter), +}; + +static devclass_t igb_devclass; +DRIVER_MODULE(igb, pci, igb_driver, igb_devclass, 0, 0); +MODULE_DEPEND(igb, pci, 1, 1, 1); +MODULE_DEPEND(igb, ether, 1, 1, 1); + +/********************************************************************* + * Tunable default values. + *********************************************************************/ + +static SYSCTL_NODE(_hw, OID_AUTO, igb, CTLFLAG_RD, 0, "IGB driver parameters"); + +/* Descriptor defaults */ +static int igb_rxd = IGB_DEFAULT_RXD; +static int igb_txd = IGB_DEFAULT_TXD; +TUNABLE_INT("hw.igb.rxd", &igb_rxd); +TUNABLE_INT("hw.igb.txd", &igb_txd); +SYSCTL_INT(_hw_igb, OID_AUTO, rxd, CTLFLAG_RDTUN, &igb_rxd, 0, + "Number of receive descriptors per queue"); +SYSCTL_INT(_hw_igb, OID_AUTO, txd, CTLFLAG_RDTUN, &igb_txd, 0, + "Number of transmit descriptors per queue"); + +/* +** AIM: Adaptive Interrupt Moderation +** which means that the interrupt rate +** is varied over time based on the +** traffic for that interrupt vector +*/ +static int igb_enable_aim = TRUE; +TUNABLE_INT("hw.igb.enable_aim", &igb_enable_aim); +SYSCTL_INT(_hw_igb, OID_AUTO, enable_aim, CTLFLAG_RW, &igb_enable_aim, 0, + "Enable adaptive interrupt moderation"); + +/* + * MSIX should be the default for best performance, + * but this allows it to be forced off for testing. + */ +static int igb_enable_msix = 1; +TUNABLE_INT("hw.igb.enable_msix", &igb_enable_msix); +SYSCTL_INT(_hw_igb, OID_AUTO, enable_msix, CTLFLAG_RDTUN, &igb_enable_msix, 0, + "Enable MSI-X interrupts"); + +/* +** Tuneable Interrupt rate +*/ +static int igb_max_interrupt_rate = 8000; +TUNABLE_INT("hw.igb.max_interrupt_rate", &igb_max_interrupt_rate); +SYSCTL_INT(_hw_igb, OID_AUTO, max_interrupt_rate, CTLFLAG_RDTUN, + &igb_max_interrupt_rate, 0, "Maximum interrupts per second"); + +#ifndef IGB_LEGACY_TX +/* +** Tuneable number of buffers in the buf-ring (drbr_xxx) +*/ +static int igb_buf_ring_size = IGB_BR_SIZE; +TUNABLE_INT("hw.igb.buf_ring_size", &igb_buf_ring_size); +SYSCTL_INT(_hw_igb, OID_AUTO, buf_ring_size, CTLFLAG_RDTUN, + &igb_buf_ring_size, 0, "Size of the bufring"); +#endif + +/* +** Header split causes the packet header to +** be dma'd to a seperate mbuf from the payload. +** this can have memory alignment benefits. But +** another plus is that small packets often fit +** into the header and thus use no cluster. Its +** a very workload dependent type feature. +*/ +static int igb_header_split = FALSE; +TUNABLE_INT("hw.igb.hdr_split", &igb_header_split); +SYSCTL_INT(_hw_igb, OID_AUTO, header_split, CTLFLAG_RDTUN, &igb_header_split, 0, + "Enable receive mbuf header split"); + +/* +** This will autoconfigure based on the +** number of CPUs and max supported +** MSIX messages if left at 0. +*/ +static int igb_num_queues = 0; +TUNABLE_INT("hw.igb.num_queues", &igb_num_queues); +SYSCTL_INT(_hw_igb, OID_AUTO, num_queues, CTLFLAG_RDTUN, &igb_num_queues, 0, + "Number of queues to configure, 0 indicates autoconfigure"); + +/* +** Global variable to store last used CPU when binding queues +** to CPUs in igb_allocate_msix. Starts at CPU_FIRST and increments when a +** queue is bound to a cpu. +*/ +static int igb_last_bind_cpu = -1; + +/* How many packets rxeof tries to clean at a time */ +static int igb_rx_process_limit = 100; +TUNABLE_INT("hw.igb.rx_process_limit", &igb_rx_process_limit); +SYSCTL_INT(_hw_igb, OID_AUTO, rx_process_limit, CTLFLAG_RDTUN, + &igb_rx_process_limit, 0, + "Maximum number of received packets to process at a time, -1 means unlimited"); + +#ifdef DEV_NETMAP /* see ixgbe.c for details */ +#include +#endif /* DEV_NETMAP */ +/********************************************************************* + * Device identification routine + * + * igb_probe determines if the driver should be loaded on + * adapter based on PCI vendor/device id of the adapter. + * + * return BUS_PROBE_DEFAULT on success, positive on failure + *********************************************************************/ + +static int +igb_probe(device_t dev) +{ + char adapter_name[60]; + uint16_t pci_vendor_id = 0; + uint16_t pci_device_id = 0; + uint16_t pci_subvendor_id = 0; + uint16_t pci_subdevice_id = 0; + igb_vendor_info_t *ent; + + INIT_DEBUGOUT("igb_probe: begin"); + + pci_vendor_id = pci_get_vendor(dev); + if (pci_vendor_id != IGB_VENDOR_ID) + return (ENXIO); + + pci_device_id = pci_get_device(dev); + pci_subvendor_id = pci_get_subvendor(dev); + pci_subdevice_id = pci_get_subdevice(dev); + + ent = igb_vendor_info_array; + while (ent->vendor_id != 0) { + if ((pci_vendor_id == ent->vendor_id) && + (pci_device_id == ent->device_id) && + + ((pci_subvendor_id == ent->subvendor_id) || + (ent->subvendor_id == PCI_ANY_ID)) && + + ((pci_subdevice_id == ent->subdevice_id) || + (ent->subdevice_id == PCI_ANY_ID))) { + sprintf(adapter_name, "%s %s", + igb_strings[ent->index], + igb_driver_version); + device_set_desc_copy(dev, adapter_name); + return (BUS_PROBE_DEFAULT); + } + ent++; + } + + return (ENXIO); +} + +/********************************************************************* + * Device initialization routine + * + * The attach entry point is called when the driver is being loaded. + * This routine identifies the type of hardware, allocates all resources + * and initializes the hardware. + * + * return 0 on success, positive on failure + *********************************************************************/ + +static int +igb_attach(device_t dev) +{ + struct adapter *adapter; + int error = 0; + u16 eeprom_data; + + INIT_DEBUGOUT("igb_attach: begin"); + + if (resource_disabled("igb", device_get_unit(dev))) { + device_printf(dev, "Disabled by device hint\n"); + return (ENXIO); + } + + adapter = device_get_softc(dev); + adapter->dev = adapter->osdep.dev = dev; + IGB_CORE_LOCK_INIT(adapter, device_get_nameunit(dev)); + + /* SYSCTL stuff */ + SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), + SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), + OID_AUTO, "nvm", CTLTYPE_INT|CTLFLAG_RW, adapter, 0, + igb_sysctl_nvm_info, "I", "NVM Information"); + + igb_set_sysctl_value(adapter, "enable_aim", + "Interrupt Moderation", &adapter->enable_aim, + igb_enable_aim); + + SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), + SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), + OID_AUTO, "fc", CTLTYPE_INT|CTLFLAG_RW, + adapter, 0, igb_set_flowcntl, "I", "Flow Control"); + + callout_init_mtx(&adapter->timer, &adapter->core_mtx, 0); + + /* Determine hardware and mac info */ + igb_identify_hardware(adapter); + + /* Setup PCI resources */ + if (igb_allocate_pci_resources(adapter)) { + device_printf(dev, "Allocation of PCI resources failed\n"); + error = ENXIO; + goto err_pci; + } + + /* Do Shared Code initialization */ + if (e1000_setup_init_funcs(&adapter->hw, TRUE)) { + device_printf(dev, "Setup of Shared code failed\n"); + error = ENXIO; + goto err_pci; + } + + e1000_get_bus_info(&adapter->hw); + + /* Sysctl for limiting the amount of work done in the taskqueue */ + igb_set_sysctl_value(adapter, "rx_processing_limit", + "max number of rx packets to process", + &adapter->rx_process_limit, igb_rx_process_limit); + + /* + * Validate number of transmit and receive descriptors. It + * must not exceed hardware maximum, and must be multiple + * of E1000_DBA_ALIGN. + */ + if (((igb_txd * sizeof(struct e1000_tx_desc)) % IGB_DBA_ALIGN) != 0 || + (igb_txd > IGB_MAX_TXD) || (igb_txd < IGB_MIN_TXD)) { + device_printf(dev, "Using %d TX descriptors instead of %d!\n", + IGB_DEFAULT_TXD, igb_txd); + adapter->num_tx_desc = IGB_DEFAULT_TXD; + } else + adapter->num_tx_desc = igb_txd; + if (((igb_rxd * sizeof(struct e1000_rx_desc)) % IGB_DBA_ALIGN) != 0 || + (igb_rxd > IGB_MAX_RXD) || (igb_rxd < IGB_MIN_RXD)) { + device_printf(dev, "Using %d RX descriptors instead of %d!\n", + IGB_DEFAULT_RXD, igb_rxd); + adapter->num_rx_desc = IGB_DEFAULT_RXD; + } else + adapter->num_rx_desc = igb_rxd; + + adapter->hw.mac.autoneg = DO_AUTO_NEG; + adapter->hw.phy.autoneg_wait_to_complete = FALSE; + adapter->hw.phy.autoneg_advertised = AUTONEG_ADV_DEFAULT; + + /* Copper options */ + if (adapter->hw.phy.media_type == e1000_media_type_copper) { + adapter->hw.phy.mdix = AUTO_ALL_MODES; + adapter->hw.phy.disable_polarity_correction = FALSE; + adapter->hw.phy.ms_type = IGB_MASTER_SLAVE; + } + + /* + * Set the frame limits assuming + * standard ethernet sized frames. + */ + adapter->max_frame_size = ETHERMTU + ETHER_HDR_LEN + ETHERNET_FCS_SIZE; + + /* + ** Allocate and Setup Queues + */ + if (igb_allocate_queues(adapter)) { + error = ENOMEM; + goto err_pci; + } + + /* Allocate the appropriate stats memory */ + if (adapter->vf_ifp) { + adapter->stats = + (struct e1000_vf_stats *)malloc(sizeof \ + (struct e1000_vf_stats), M_DEVBUF, M_NOWAIT | M_ZERO); + igb_vf_init_stats(adapter); + } else + adapter->stats = + (struct e1000_hw_stats *)malloc(sizeof \ + (struct e1000_hw_stats), M_DEVBUF, M_NOWAIT | M_ZERO); + if (adapter->stats == NULL) { + device_printf(dev, "Can not allocate stats memory\n"); + error = ENOMEM; + goto err_late; + } + + /* Allocate multicast array memory. */ + adapter->mta = malloc(sizeof(u8) * ETH_ADDR_LEN * + MAX_NUM_MULTICAST_ADDRESSES, M_DEVBUF, M_NOWAIT); + if (adapter->mta == NULL) { + device_printf(dev, "Can not allocate multicast setup array\n"); + error = ENOMEM; + goto err_late; + } + + /* Some adapter-specific advanced features */ + if (adapter->hw.mac.type >= e1000_i350) { + SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), + SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), + OID_AUTO, "dmac", CTLTYPE_INT|CTLFLAG_RW, + adapter, 0, igb_sysctl_dmac, "I", "DMA Coalesce"); + SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev), + SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), + OID_AUTO, "eee_disabled", CTLTYPE_INT|CTLFLAG_RW, + adapter, 0, igb_sysctl_eee, "I", + "Disable Energy Efficient Ethernet"); + if (adapter->hw.phy.media_type == e1000_media_type_copper) { + if (adapter->hw.mac.type == e1000_i354) + e1000_set_eee_i354(&adapter->hw, true, true); + else + e1000_set_eee_i350(&adapter->hw, true, true); + } + } + + /* + ** Start from a known state, this is + ** important in reading the nvm and + ** mac from that. + */ + e1000_reset_hw(&adapter->hw); + + /* Make sure we have a good EEPROM before we read from it */ + if (((adapter->hw.mac.type != e1000_i210) && + (adapter->hw.mac.type != e1000_i211)) && + (e1000_validate_nvm_checksum(&adapter->hw) < 0)) { + /* + ** Some PCI-E parts fail the first check due to + ** the link being in sleep state, call it again, + ** if it fails a second time its a real issue. + */ + if (e1000_validate_nvm_checksum(&adapter->hw) < 0) { + device_printf(dev, + "The EEPROM Checksum Is Not Valid\n"); + error = EIO; + goto err_late; + } + } + + /* + ** Copy the permanent MAC address out of the EEPROM + */ + if (e1000_read_mac_addr(&adapter->hw) < 0) { + device_printf(dev, "EEPROM read error while reading MAC" + " address\n"); + error = EIO; + goto err_late; + } + /* Check its sanity */ + if (!igb_is_valid_ether_addr(adapter->hw.mac.addr)) { + device_printf(dev, "Invalid MAC address\n"); + error = EIO; + goto err_late; + } + + /* Setup OS specific network interface */ + if (igb_setup_interface(dev, adapter) != 0) + goto err_late; + + /* Now get a good starting state */ + igb_reset(adapter); + + /* Initialize statistics */ + igb_update_stats_counters(adapter); + + adapter->hw.mac.get_link_status = 1; + igb_update_link_status(adapter); + + /* Indicate SOL/IDER usage */ + if (e1000_check_reset_block(&adapter->hw)) + device_printf(dev, + "PHY reset is blocked due to SOL/IDER session.\n"); + + /* Determine if we have to control management hardware */ + adapter->has_manage = e1000_enable_mng_pass_thru(&adapter->hw); + + /* + * Setup Wake-on-Lan + */ + /* APME bit in EEPROM is mapped to WUC.APME */ + eeprom_data = E1000_READ_REG(&adapter->hw, E1000_WUC) & E1000_WUC_APME; + if (eeprom_data) + adapter->wol = E1000_WUFC_MAG; + + /* Register for VLAN events */ + adapter->vlan_attach = EVENTHANDLER_REGISTER(vlan_config, + igb_register_vlan, adapter, EVENTHANDLER_PRI_FIRST); + adapter->vlan_detach = EVENTHANDLER_REGISTER(vlan_unconfig, + igb_unregister_vlan, adapter, EVENTHANDLER_PRI_FIRST); + + igb_add_hw_stats(adapter); + + /* Tell the stack that the interface is not active */ + adapter->ifp->if_drv_flags &= ~IFF_DRV_RUNNING; + adapter->ifp->if_drv_flags |= IFF_DRV_OACTIVE; + + adapter->led_dev = led_create(igb_led_func, adapter, + device_get_nameunit(dev)); + + /* + ** Configure Interrupts + */ + if ((adapter->msix > 1) && (igb_enable_msix)) + error = igb_allocate_msix(adapter); + else /* MSI or Legacy */ + error = igb_allocate_legacy(adapter); + if (error) + goto err_late; + +#ifdef DEV_NETMAP + igb_netmap_attach(adapter); +#endif /* DEV_NETMAP */ + INIT_DEBUGOUT("igb_attach: end"); + + return (0); + +err_late: + igb_detach(dev); + igb_free_transmit_structures(adapter); + igb_free_receive_structures(adapter); + igb_release_hw_control(adapter); +err_pci: + igb_free_pci_resources(adapter); + if (adapter->ifp != NULL) + if_free(adapter->ifp); + free(adapter->mta, M_DEVBUF); + IGB_CORE_LOCK_DESTROY(adapter); + + return (error); +} + +/********************************************************************* + * Device removal routine + * + * The detach entry point is called when the driver is being removed. + * This routine stops the adapter and deallocates all the resources + * that were allocated for driver operation. + * + * return 0 on success, positive on failure + *********************************************************************/ + +static int +igb_detach(device_t dev) +{ + struct adapter *adapter = device_get_softc(dev); + struct ifnet *ifp = adapter->ifp; + + INIT_DEBUGOUT("igb_detach: begin"); + + /* Make sure VLANS are not using driver */ + if (adapter->ifp->if_vlantrunk != NULL) { + device_printf(dev,"Vlan in use, detach first\n"); + return (EBUSY); + } + + ether_ifdetach(adapter->ifp); + + if (adapter->led_dev != NULL) + led_destroy(adapter->led_dev); + +#ifdef DEVICE_POLLING + if (ifp->if_capenable & IFCAP_POLLING) + ether_poll_deregister(ifp); +#endif + + IGB_CORE_LOCK(adapter); + adapter->in_detach = 1; + igb_stop(adapter); + IGB_CORE_UNLOCK(adapter); + + e1000_phy_hw_reset(&adapter->hw); + + /* Give control back to firmware */ + igb_release_manageability(adapter); + igb_release_hw_control(adapter); + + if (adapter->wol) { + E1000_WRITE_REG(&adapter->hw, E1000_WUC, E1000_WUC_PME_EN); + E1000_WRITE_REG(&adapter->hw, E1000_WUFC, adapter->wol); + igb_enable_wakeup(dev); + } + + /* Unregister VLAN events */ + if (adapter->vlan_attach != NULL) + EVENTHANDLER_DEREGISTER(vlan_config, adapter->vlan_attach); + if (adapter->vlan_detach != NULL) + EVENTHANDLER_DEREGISTER(vlan_unconfig, adapter->vlan_detach); + + callout_drain(&adapter->timer); + +#ifdef DEV_NETMAP + netmap_detach(adapter->ifp); +#endif /* DEV_NETMAP */ + igb_free_pci_resources(adapter); + bus_generic_detach(dev); + if_free(ifp); + + igb_free_transmit_structures(adapter); + igb_free_receive_structures(adapter); + if (adapter->mta != NULL) + free(adapter->mta, M_DEVBUF); + + IGB_CORE_LOCK_DESTROY(adapter); + + return (0); +} + +/********************************************************************* + * + * Shutdown entry point + * + **********************************************************************/ + +static int +igb_shutdown(device_t dev) +{ + return igb_suspend(dev); +} + +/* + * Suspend/resume device methods. + */ +static int +igb_suspend(device_t dev) +{ + struct adapter *adapter = device_get_softc(dev); + + IGB_CORE_LOCK(adapter); + + igb_stop(adapter); + + igb_release_manageability(adapter); + igb_release_hw_control(adapter); + + if (adapter->wol) { + E1000_WRITE_REG(&adapter->hw, E1000_WUC, E1000_WUC_PME_EN); + E1000_WRITE_REG(&adapter->hw, E1000_WUFC, adapter->wol); + igb_enable_wakeup(dev); + } + + IGB_CORE_UNLOCK(adapter); + + return bus_generic_suspend(dev); +} + +static int +igb_resume(device_t dev) +{ + struct adapter *adapter = device_get_softc(dev); + struct tx_ring *txr = adapter->tx_rings; + struct ifnet *ifp = adapter->ifp; + + IGB_CORE_LOCK(adapter); + igb_init_locked(adapter); + igb_init_manageability(adapter); + + if ((ifp->if_flags & IFF_UP) && + (ifp->if_drv_flags & IFF_DRV_RUNNING) && adapter->link_active) { + for (int i = 0; i < adapter->num_queues; i++, txr++) { + IGB_TX_LOCK(txr); +#ifndef IGB_LEGACY_TX + /* Process the stack queue only if not depleted */ + if (((txr->queue_status & IGB_QUEUE_DEPLETED) == 0) && + !drbr_empty(ifp, txr->br)) + igb_mq_start_locked(ifp, txr); +#else + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + igb_start_locked(txr, ifp); +#endif + IGB_TX_UNLOCK(txr); + } + } + IGB_CORE_UNLOCK(adapter); + + return bus_generic_resume(dev); +} + + +#ifdef IGB_LEGACY_TX + +/********************************************************************* + * Transmit entry point + * + * igb_start is called by the stack to initiate a transmit. + * The driver will remain in this routine as long as there are + * packets to transmit and transmit resources are available. + * In case resources are not available stack is notified and + * the packet is requeued. + **********************************************************************/ + +static void +igb_start_locked(struct tx_ring *txr, struct ifnet *ifp) +{ + struct adapter *adapter = ifp->if_softc; + struct mbuf *m_head; + + IGB_TX_LOCK_ASSERT(txr); + + if ((ifp->if_drv_flags & (IFF_DRV_RUNNING|IFF_DRV_OACTIVE)) != + IFF_DRV_RUNNING) + return; + if (!adapter->link_active) + return; + + /* Call cleanup if number of TX descriptors low */ + if (txr->tx_avail <= IGB_TX_CLEANUP_THRESHOLD) + igb_txeof(txr); + + while (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) { + if (txr->tx_avail <= IGB_MAX_SCATTER) { + txr->queue_status |= IGB_QUEUE_DEPLETED; + break; + } + IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); + if (m_head == NULL) + break; + /* + * Encapsulation can modify our pointer, and or make it + * NULL on failure. In that event, we can't requeue. + */ + if (igb_xmit(txr, &m_head)) { + if (m_head != NULL) + IFQ_DRV_PREPEND(&ifp->if_snd, m_head); + if (txr->tx_avail <= IGB_MAX_SCATTER) + txr->queue_status |= IGB_QUEUE_DEPLETED; + break; + } + + /* Send a copy of the frame to the BPF listener */ + ETHER_BPF_MTAP(ifp, m_head); + + /* Set watchdog on */ + txr->watchdog_time = ticks; + txr->queue_status |= IGB_QUEUE_WORKING; + } +} + +/* + * Legacy TX driver routine, called from the + * stack, always uses tx[0], and spins for it. + * Should not be used with multiqueue tx + */ +static void +igb_start(struct ifnet *ifp) +{ + struct adapter *adapter = ifp->if_softc; + struct tx_ring *txr = adapter->tx_rings; + + if (ifp->if_drv_flags & IFF_DRV_RUNNING) { + IGB_TX_LOCK(txr); + igb_start_locked(txr, ifp); + IGB_TX_UNLOCK(txr); + } + return; +} + +#else /* ~IGB_LEGACY_TX */ + +/* +** Multiqueue Transmit Entry: +** quick turnaround to the stack +** +*/ +static int +igb_mq_start(struct ifnet *ifp, struct mbuf *m) +{ + struct adapter *adapter = ifp->if_softc; + struct igb_queue *que; + struct tx_ring *txr; + int i, err = 0; + + /* Which queue to use */ + if ((m->m_flags & M_FLOWID) != 0) + i = m->m_pkthdr.flowid % adapter->num_queues; + else + i = curcpu % adapter->num_queues; + txr = &adapter->tx_rings[i]; + que = &adapter->queues[i]; + + err = drbr_enqueue(ifp, txr->br, m); + if (err) + return (err); + if (IGB_TX_TRYLOCK(txr)) { + err = igb_mq_start_locked(ifp, txr); + IGB_TX_UNLOCK(txr); + } else + taskqueue_enqueue(que->tq, &txr->txq_task); + + return (err); +} + +static int +igb_mq_start_locked(struct ifnet *ifp, struct tx_ring *txr) +{ + struct adapter *adapter = txr->adapter; + struct mbuf *next; + int err = 0, enq = 0; + + IGB_TX_LOCK_ASSERT(txr); + + if (((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) || + adapter->link_active == 0) + return (ENETDOWN); + + + /* Process the queue */ +#if __FreeBSD_version < 901504 + next = drbr_dequeue(ifp, txr->br); + while (next != NULL) { + if ((err = igb_xmit(txr, &next)) != 0) { + if (next != NULL) + err = drbr_enqueue(ifp, txr->br, next); +#else + while ((next = drbr_peek(ifp, txr->br)) != NULL) { + if ((err = igb_xmit(txr, &next)) != 0) { + if (next == NULL) { + /* It was freed, move forward */ + drbr_advance(ifp, txr->br); + } else { + /* + * Still have one left, it may not be + * the same since the transmit function + * may have changed it. + */ + drbr_putback(ifp, txr->br, next); + } +#endif + break; + } +#if __FreeBSD_version >= 901504 + drbr_advance(ifp, txr->br); +#endif + enq++; + ifp->if_obytes += next->m_pkthdr.len; + if (next->m_flags & M_MCAST) + ifp->if_omcasts++; + ETHER_BPF_MTAP(ifp, next); + if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) + break; +#if __FreeBSD_version < 901504 + next = drbr_dequeue(ifp, txr->br); +#endif + } + if (enq > 0) { + /* Set the watchdog */ + txr->queue_status |= IGB_QUEUE_WORKING; + txr->watchdog_time = ticks; + } + if (txr->tx_avail <= IGB_TX_CLEANUP_THRESHOLD) + igb_txeof(txr); + if (txr->tx_avail <= IGB_MAX_SCATTER) + txr->queue_status |= IGB_QUEUE_DEPLETED; + return (err); +} + +/* + * Called from a taskqueue to drain queued transmit packets. + */ +static void +igb_deferred_mq_start(void *arg, int pending) +{ + struct tx_ring *txr = arg; + struct adapter *adapter = txr->adapter; + struct ifnet *ifp = adapter->ifp; + + IGB_TX_LOCK(txr); + if (!drbr_empty(ifp, txr->br)) + igb_mq_start_locked(ifp, txr); + IGB_TX_UNLOCK(txr); +} + +/* +** Flush all ring buffers +*/ +static void +igb_qflush(struct ifnet *ifp) +{ + struct adapter *adapter = ifp->if_softc; + struct tx_ring *txr = adapter->tx_rings; + struct mbuf *m; + + for (int i = 0; i < adapter->num_queues; i++, txr++) { + IGB_TX_LOCK(txr); + while ((m = buf_ring_dequeue_sc(txr->br)) != NULL) + m_freem(m); + IGB_TX_UNLOCK(txr); + } + if_qflush(ifp); +} +#endif /* ~IGB_LEGACY_TX */ + +/********************************************************************* + * Ioctl entry point + * + * igb_ioctl is called when the user wants to configure the + * interface. + * + * return 0 on success, positive on failure + **********************************************************************/ + +static int +igb_ioctl(struct ifnet *ifp, u_long command, caddr_t data) +{ + struct adapter *adapter = ifp->if_softc; + struct ifreq *ifr = (struct ifreq *)data; +#if defined(INET) || defined(INET6) + struct ifaddr *ifa = (struct ifaddr *)data; +#endif + bool avoid_reset = FALSE; + int error = 0; + + if (adapter->in_detach) + return (error); + + switch (command) { + case SIOCSIFADDR: +#ifdef INET + if (ifa->ifa_addr->sa_family == AF_INET) + avoid_reset = TRUE; +#endif +#ifdef INET6 + if (ifa->ifa_addr->sa_family == AF_INET6) + avoid_reset = TRUE; +#endif + /* + ** Calling init results in link renegotiation, + ** so we avoid doing it when possible. + */ + if (avoid_reset) { + ifp->if_flags |= IFF_UP; + if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) + igb_init(adapter); +#ifdef INET + if (!(ifp->if_flags & IFF_NOARP)) + arp_ifinit(ifp, ifa); +#endif + } else + error = ether_ioctl(ifp, command, data); + break; + case SIOCSIFMTU: + { + int max_frame_size; + + IOCTL_DEBUGOUT("ioctl rcv'd: SIOCSIFMTU (Set Interface MTU)"); + + IGB_CORE_LOCK(adapter); + max_frame_size = 9234; + if (ifr->ifr_mtu > max_frame_size - ETHER_HDR_LEN - + ETHER_CRC_LEN) { + IGB_CORE_UNLOCK(adapter); + error = EINVAL; + break; + } + + ifp->if_mtu = ifr->ifr_mtu; + adapter->max_frame_size = + ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN; + igb_init_locked(adapter); + IGB_CORE_UNLOCK(adapter); + break; + } + case SIOCSIFFLAGS: + IOCTL_DEBUGOUT("ioctl rcv'd:\ + SIOCSIFFLAGS (Set Interface Flags)"); + IGB_CORE_LOCK(adapter); + if (ifp->if_flags & IFF_UP) { + if ((ifp->if_drv_flags & IFF_DRV_RUNNING)) { + if ((ifp->if_flags ^ adapter->if_flags) & + (IFF_PROMISC | IFF_ALLMULTI)) { + igb_disable_promisc(adapter); + igb_set_promisc(adapter); + } + } else + igb_init_locked(adapter); + } else + if (ifp->if_drv_flags & IFF_DRV_RUNNING) + igb_stop(adapter); + adapter->if_flags = ifp->if_flags; + IGB_CORE_UNLOCK(adapter); + break; + case SIOCADDMULTI: + case SIOCDELMULTI: + IOCTL_DEBUGOUT("ioctl rcv'd: SIOC(ADD|DEL)MULTI"); + if (ifp->if_drv_flags & IFF_DRV_RUNNING) { + IGB_CORE_LOCK(adapter); + igb_disable_intr(adapter); + igb_set_multi(adapter); +#ifdef DEVICE_POLLING + if (!(ifp->if_capenable & IFCAP_POLLING)) +#endif + igb_enable_intr(adapter); + IGB_CORE_UNLOCK(adapter); + } + break; + case SIOCSIFMEDIA: + /* Check SOL/IDER usage */ + IGB_CORE_LOCK(adapter); + if (e1000_check_reset_block(&adapter->hw)) { + IGB_CORE_UNLOCK(adapter); + device_printf(adapter->dev, "Media change is" + " blocked due to SOL/IDER session.\n"); + break; + } + IGB_CORE_UNLOCK(adapter); + case SIOCGIFMEDIA: + IOCTL_DEBUGOUT("ioctl rcv'd: \ + SIOCxIFMEDIA (Get/Set Interface Media)"); + error = ifmedia_ioctl(ifp, ifr, &adapter->media, command); + break; + case SIOCSIFCAP: + { + int mask, reinit; + + IOCTL_DEBUGOUT("ioctl rcv'd: SIOCSIFCAP (Set Capabilities)"); + reinit = 0; + mask = ifr->ifr_reqcap ^ ifp->if_capenable; +#ifdef DEVICE_POLLING + if (mask & IFCAP_POLLING) { + if (ifr->ifr_reqcap & IFCAP_POLLING) { + error = ether_poll_register(igb_poll, ifp); + if (error) + return (error); + IGB_CORE_LOCK(adapter); + igb_disable_intr(adapter); + ifp->if_capenable |= IFCAP_POLLING; + IGB_CORE_UNLOCK(adapter); + } else { + error = ether_poll_deregister(ifp); + /* Enable interrupt even in error case */ + IGB_CORE_LOCK(adapter); + igb_enable_intr(adapter); + ifp->if_capenable &= ~IFCAP_POLLING; + IGB_CORE_UNLOCK(adapter); + } + } +#endif + if (mask & IFCAP_HWCSUM) { + ifp->if_capenable ^= IFCAP_HWCSUM; + reinit = 1; + } + if (mask & IFCAP_TSO4) { + ifp->if_capenable ^= IFCAP_TSO4; + reinit = 1; + } + if (mask & IFCAP_TSO6) { + ifp->if_capenable ^= IFCAP_TSO6; + reinit = 1; + } + if (mask & IFCAP_VLAN_HWTAGGING) { + ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING; + reinit = 1; + } + if (mask & IFCAP_VLAN_HWFILTER) { + ifp->if_capenable ^= IFCAP_VLAN_HWFILTER; + reinit = 1; + } + if (mask & IFCAP_VLAN_HWTSO) { + ifp->if_capenable ^= IFCAP_VLAN_HWTSO; + reinit = 1; + } + if (mask & IFCAP_LRO) { + ifp->if_capenable ^= IFCAP_LRO; + reinit = 1; + } + if (reinit && (ifp->if_drv_flags & IFF_DRV_RUNNING)) + igb_init(adapter); + VLAN_CAPABILITIES(ifp); + break; + } + + default: + error = ether_ioctl(ifp, command, data); + break; + } + + return (error); +} + + +/********************************************************************* + * Init entry point + * + * This routine is used in two ways. It is used by the stack as + * init entry point in network interface structure. It is also used + * by the driver as a hw/sw initialization routine to get to a + * consistent state. + * + * return 0 on success, positive on failure + **********************************************************************/ + +static void +igb_init_locked(struct adapter *adapter) +{ + struct ifnet *ifp = adapter->ifp; + device_t dev = adapter->dev; + + INIT_DEBUGOUT("igb_init: begin"); + + IGB_CORE_LOCK_ASSERT(adapter); + + igb_disable_intr(adapter); + callout_stop(&adapter->timer); + + /* Get the latest mac address, User can use a LAA */ + bcopy(IF_LLADDR(adapter->ifp), adapter->hw.mac.addr, + ETHER_ADDR_LEN); + + /* Put the address into the Receive Address Array */ + e1000_rar_set(&adapter->hw, adapter->hw.mac.addr, 0); + + igb_reset(adapter); + igb_update_link_status(adapter); + + E1000_WRITE_REG(&adapter->hw, E1000_VET, ETHERTYPE_VLAN); + + /* Set hardware offload abilities */ + ifp->if_hwassist = 0; + if (ifp->if_capenable & IFCAP_TXCSUM) { + ifp->if_hwassist |= (CSUM_TCP | CSUM_UDP); + if (ifp->if_capenable & IFCAP_TSO) + ifp->if_hwassist |= CSUM_TSO; +#if __FreeBSD_version >= 800000 + if (adapter->hw.mac.type == e1000_82576) + ifp->if_hwassist |= CSUM_SCTP; +#endif + } + + /* Configure for OS presence */ + igb_init_manageability(adapter); + + /* Prepare transmit descriptors and buffers */ + igb_setup_transmit_structures(adapter); + igb_initialize_transmit_units(adapter); + + /* Setup Multicast table */ + igb_set_multi(adapter); + + /* + ** Figure out the desired mbuf pool + ** for doing jumbo/packetsplit + */ + if (adapter->max_frame_size <= 2048) + adapter->rx_mbuf_sz = MCLBYTES; + else if (adapter->max_frame_size <= 4096) + adapter->rx_mbuf_sz = MJUMPAGESIZE; + else + adapter->rx_mbuf_sz = MJUM9BYTES; + + /* Prepare receive descriptors and buffers */ + if (igb_setup_receive_structures(adapter)) { + device_printf(dev, "Could not setup receive structures\n"); + return; + } + igb_initialize_receive_units(adapter); + + /* Enable VLAN support */ + if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) + igb_setup_vlan_hw_support(adapter); + + /* Don't lose promiscuous settings */ + igb_set_promisc(adapter); + + ifp->if_drv_flags |= IFF_DRV_RUNNING; + ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; + + callout_reset(&adapter->timer, hz, igb_local_timer, adapter); + e1000_clear_hw_cntrs_base_generic(&adapter->hw); + + if (adapter->msix > 1) /* Set up queue routing */ + igb_configure_queues(adapter); + + /* this clears any pending interrupts */ + E1000_READ_REG(&adapter->hw, E1000_ICR); +#ifdef DEVICE_POLLING + /* + * Only enable interrupts if we are not polling, make sure + * they are off otherwise. + */ + if (ifp->if_capenable & IFCAP_POLLING) + igb_disable_intr(adapter); + else +#endif /* DEVICE_POLLING */ + { + igb_enable_intr(adapter); + E1000_WRITE_REG(&adapter->hw, E1000_ICS, E1000_ICS_LSC); + } + + /* Set Energy Efficient Ethernet */ + if (adapter->hw.phy.media_type == e1000_media_type_copper) { + if (adapter->hw.mac.type == e1000_i354) + e1000_set_eee_i354(&adapter->hw, true, true); + else + e1000_set_eee_i350(&adapter->hw, true, true); + } +} + +static void +igb_init(void *arg) +{ + struct adapter *adapter = arg; + + IGB_CORE_LOCK(adapter); + igb_init_locked(adapter); + IGB_CORE_UNLOCK(adapter); +} + + +static void +igb_handle_que(void *context, int pending) +{ + struct igb_queue *que = context; + struct adapter *adapter = que->adapter; + struct tx_ring *txr = que->txr; + struct ifnet *ifp = adapter->ifp; + + if (ifp->if_drv_flags & IFF_DRV_RUNNING) { + bool more; + + more = igb_rxeof(que, adapter->rx_process_limit, NULL); + + IGB_TX_LOCK(txr); + igb_txeof(txr); +#ifndef IGB_LEGACY_TX + /* Process the stack queue only if not depleted */ + if (((txr->queue_status & IGB_QUEUE_DEPLETED) == 0) && + !drbr_empty(ifp, txr->br)) + igb_mq_start_locked(ifp, txr); +#else + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + igb_start_locked(txr, ifp); +#endif + IGB_TX_UNLOCK(txr); + /* Do we need another? */ + if (more) { + taskqueue_enqueue(que->tq, &que->que_task); + return; + } + } + +#ifdef DEVICE_POLLING + if (ifp->if_capenable & IFCAP_POLLING) + return; +#endif + /* Reenable this interrupt */ + if (que->eims) + E1000_WRITE_REG(&adapter->hw, E1000_EIMS, que->eims); + else + igb_enable_intr(adapter); +} + +/* Deal with link in a sleepable context */ +static void +igb_handle_link(void *context, int pending) +{ + struct adapter *adapter = context; + + IGB_CORE_LOCK(adapter); + igb_handle_link_locked(adapter); + IGB_CORE_UNLOCK(adapter); +} + +static void +igb_handle_link_locked(struct adapter *adapter) +{ + struct tx_ring *txr = adapter->tx_rings; + struct ifnet *ifp = adapter->ifp; + + IGB_CORE_LOCK_ASSERT(adapter); + adapter->hw.mac.get_link_status = 1; + igb_update_link_status(adapter); + if ((ifp->if_drv_flags & IFF_DRV_RUNNING) && adapter->link_active) { + for (int i = 0; i < adapter->num_queues; i++, txr++) { + IGB_TX_LOCK(txr); +#ifndef IGB_LEGACY_TX + /* Process the stack queue only if not depleted */ + if (((txr->queue_status & IGB_QUEUE_DEPLETED) == 0) && + !drbr_empty(ifp, txr->br)) + igb_mq_start_locked(ifp, txr); +#else + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + igb_start_locked(txr, ifp); +#endif + IGB_TX_UNLOCK(txr); + } + } +} + +/********************************************************************* + * + * MSI/Legacy Deferred + * Interrupt Service routine + * + *********************************************************************/ +static int +igb_irq_fast(void *arg) +{ + struct adapter *adapter = arg; + struct igb_queue *que = adapter->queues; + u32 reg_icr; + + + reg_icr = E1000_READ_REG(&adapter->hw, E1000_ICR); + + /* Hot eject? */ + if (reg_icr == 0xffffffff) + return FILTER_STRAY; + + /* Definitely not our interrupt. */ + if (reg_icr == 0x0) + return FILTER_STRAY; + + if ((reg_icr & E1000_ICR_INT_ASSERTED) == 0) + return FILTER_STRAY; + + /* + * Mask interrupts until the taskqueue is finished running. This is + * cheap, just assume that it is needed. This also works around the + * MSI message reordering errata on certain systems. + */ + igb_disable_intr(adapter); + taskqueue_enqueue(que->tq, &que->que_task); + + /* Link status change */ + if (reg_icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) + taskqueue_enqueue(que->tq, &adapter->link_task); + + if (reg_icr & E1000_ICR_RXO) + adapter->rx_overruns++; + return FILTER_HANDLED; +} + +#ifdef DEVICE_POLLING +#if __FreeBSD_version >= 800000 +#define POLL_RETURN_COUNT(a) (a) +static int +#else +#define POLL_RETURN_COUNT(a) +static void +#endif +igb_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) +{ + struct adapter *adapter = ifp->if_softc; + struct igb_queue *que; + struct tx_ring *txr; + u32 reg_icr, rx_done = 0; + u32 loop = IGB_MAX_LOOP; + bool more; + + IGB_CORE_LOCK(adapter); + if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { + IGB_CORE_UNLOCK(adapter); + return POLL_RETURN_COUNT(rx_done); + } + + if (cmd == POLL_AND_CHECK_STATUS) { + reg_icr = E1000_READ_REG(&adapter->hw, E1000_ICR); + /* Link status change */ + if (reg_icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) + igb_handle_link_locked(adapter); + + if (reg_icr & E1000_ICR_RXO) + adapter->rx_overruns++; + } + IGB_CORE_UNLOCK(adapter); + + for (int i = 0; i < adapter->num_queues; i++) { + que = &adapter->queues[i]; + txr = que->txr; + + igb_rxeof(que, count, &rx_done); + + IGB_TX_LOCK(txr); + do { + more = igb_txeof(txr); + } while (loop-- && more); +#ifndef IGB_LEGACY_TX + if (!drbr_empty(ifp, txr->br)) + igb_mq_start_locked(ifp, txr); +#else + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + igb_start_locked(txr, ifp); +#endif + IGB_TX_UNLOCK(txr); + } + + return POLL_RETURN_COUNT(rx_done); +} +#endif /* DEVICE_POLLING */ + +/********************************************************************* + * + * MSIX Que Interrupt Service routine + * + **********************************************************************/ +static void +igb_msix_que(void *arg) +{ + struct igb_queue *que = arg; + struct adapter *adapter = que->adapter; + struct ifnet *ifp = adapter->ifp; + struct tx_ring *txr = que->txr; + struct rx_ring *rxr = que->rxr; + u32 newitr = 0; + bool more_rx; + + /* Ignore spurious interrupts */ + if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) + return; + + E1000_WRITE_REG(&adapter->hw, E1000_EIMC, que->eims); + ++que->irqs; + + IGB_TX_LOCK(txr); + igb_txeof(txr); +#ifndef IGB_LEGACY_TX + /* Process the stack queue only if not depleted */ + if (((txr->queue_status & IGB_QUEUE_DEPLETED) == 0) && + !drbr_empty(ifp, txr->br)) + igb_mq_start_locked(ifp, txr); +#else + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + igb_start_locked(txr, ifp); +#endif + IGB_TX_UNLOCK(txr); + + more_rx = igb_rxeof(que, adapter->rx_process_limit, NULL); + + if (adapter->enable_aim == FALSE) + goto no_calc; + /* + ** Do Adaptive Interrupt Moderation: + ** - Write out last calculated setting + ** - Calculate based on average size over + ** the last interval. + */ + if (que->eitr_setting) + E1000_WRITE_REG(&adapter->hw, + E1000_EITR(que->msix), que->eitr_setting); + + que->eitr_setting = 0; + + /* Idle, do nothing */ + if ((txr->bytes == 0) && (rxr->bytes == 0)) + goto no_calc; + + /* Used half Default if sub-gig */ + if (adapter->link_speed != 1000) + newitr = IGB_DEFAULT_ITR / 2; + else { + if ((txr->bytes) && (txr->packets)) + newitr = txr->bytes/txr->packets; + if ((rxr->bytes) && (rxr->packets)) + newitr = max(newitr, + (rxr->bytes / rxr->packets)); + newitr += 24; /* account for hardware frame, crc */ + /* set an upper boundary */ + newitr = min(newitr, 3000); + /* Be nice to the mid range */ + if ((newitr > 300) && (newitr < 1200)) + newitr = (newitr / 3); + else + newitr = (newitr / 2); + } + newitr &= 0x7FFC; /* Mask invalid bits */ + if (adapter->hw.mac.type == e1000_82575) + newitr |= newitr << 16; + else + newitr |= E1000_EITR_CNT_IGNR; + + /* save for next interrupt */ + que->eitr_setting = newitr; + + /* Reset state */ + txr->bytes = 0; + txr->packets = 0; + rxr->bytes = 0; + rxr->packets = 0; + +no_calc: + /* Schedule a clean task if needed*/ + if (more_rx) + taskqueue_enqueue(que->tq, &que->que_task); + else + /* Reenable this interrupt */ + E1000_WRITE_REG(&adapter->hw, E1000_EIMS, que->eims); + return; +} + + +/********************************************************************* + * + * MSIX Link Interrupt Service routine + * + **********************************************************************/ + +static void +igb_msix_link(void *arg) +{ + struct adapter *adapter = arg; + u32 icr; + + ++adapter->link_irq; + icr = E1000_READ_REG(&adapter->hw, E1000_ICR); + if (!(icr & E1000_ICR_LSC)) + goto spurious; + igb_handle_link(adapter, 0); + +spurious: + /* Rearm */ + E1000_WRITE_REG(&adapter->hw, E1000_IMS, E1000_IMS_LSC); + E1000_WRITE_REG(&adapter->hw, E1000_EIMS, adapter->link_mask); + return; +} + + +/********************************************************************* + * + * Media Ioctl callback + * + * This routine is called whenever the user queries the status of + * the interface using ifconfig. + * + **********************************************************************/ +static void +igb_media_status(struct ifnet *ifp, struct ifmediareq *ifmr) +{ + struct adapter *adapter = ifp->if_softc; + + INIT_DEBUGOUT("igb_media_status: begin"); + + IGB_CORE_LOCK(adapter); + igb_update_link_status(adapter); + + ifmr->ifm_status = IFM_AVALID; + ifmr->ifm_active = IFM_ETHER; + + if (!adapter->link_active) { + IGB_CORE_UNLOCK(adapter); + return; + } + + ifmr->ifm_status |= IFM_ACTIVE; + + switch (adapter->link_speed) { + case 10: + ifmr->ifm_active |= IFM_10_T; + break; + case 100: + /* + ** Support for 100Mb SFP - these are Fiber + ** but the media type appears as serdes + */ + if (adapter->hw.phy.media_type == + e1000_media_type_internal_serdes) + ifmr->ifm_active |= IFM_100_FX; + else + ifmr->ifm_active |= IFM_100_TX; + break; + case 1000: + ifmr->ifm_active |= IFM_1000_T; + break; + case 2500: + ifmr->ifm_active |= IFM_2500_SX; + break; + } + + if (adapter->link_duplex == FULL_DUPLEX) + ifmr->ifm_active |= IFM_FDX; + else + ifmr->ifm_active |= IFM_HDX; + + IGB_CORE_UNLOCK(adapter); +} + +/********************************************************************* + * + * Media Ioctl callback + * + * This routine is called when the user changes speed/duplex using + * media/mediopt option with ifconfig. + * + **********************************************************************/ +static int +igb_media_change(struct ifnet *ifp) +{ + struct adapter *adapter = ifp->if_softc; + struct ifmedia *ifm = &adapter->media; + + INIT_DEBUGOUT("igb_media_change: begin"); + + if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) + return (EINVAL); + + IGB_CORE_LOCK(adapter); + switch (IFM_SUBTYPE(ifm->ifm_media)) { + case IFM_AUTO: + adapter->hw.mac.autoneg = DO_AUTO_NEG; + adapter->hw.phy.autoneg_advertised = AUTONEG_ADV_DEFAULT; + break; + case IFM_1000_LX: + case IFM_1000_SX: + case IFM_1000_T: + adapter->hw.mac.autoneg = DO_AUTO_NEG; + adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL; + break; + case IFM_100_TX: + adapter->hw.mac.autoneg = FALSE; + adapter->hw.phy.autoneg_advertised = 0; + if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) + adapter->hw.mac.forced_speed_duplex = ADVERTISE_100_FULL; + else + adapter->hw.mac.forced_speed_duplex = ADVERTISE_100_HALF; + break; + case IFM_10_T: + adapter->hw.mac.autoneg = FALSE; + adapter->hw.phy.autoneg_advertised = 0; + if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) + adapter->hw.mac.forced_speed_duplex = ADVERTISE_10_FULL; + else + adapter->hw.mac.forced_speed_duplex = ADVERTISE_10_HALF; + break; + default: + device_printf(adapter->dev, "Unsupported media type\n"); + } + + igb_init_locked(adapter); + IGB_CORE_UNLOCK(adapter); + + return (0); +} + + +/********************************************************************* + * + * This routine maps the mbufs to Advanced TX descriptors. + * + **********************************************************************/ +static int +igb_xmit(struct tx_ring *txr, struct mbuf **m_headp) +{ + struct adapter *adapter = txr->adapter; + u32 olinfo_status = 0, cmd_type_len; + int i, j, error, nsegs; + int first; + bool remap = TRUE; + struct mbuf *m_head; + bus_dma_segment_t segs[IGB_MAX_SCATTER]; + bus_dmamap_t map; + struct igb_tx_buf *txbuf; + union e1000_adv_tx_desc *txd = NULL; + + m_head = *m_headp; + + /* Basic descriptor defines */ + cmd_type_len = (E1000_ADVTXD_DTYP_DATA | + E1000_ADVTXD_DCMD_IFCS | E1000_ADVTXD_DCMD_DEXT); + + if (m_head->m_flags & M_VLANTAG) + cmd_type_len |= E1000_ADVTXD_DCMD_VLE; + + /* + * Important to capture the first descriptor + * used because it will contain the index of + * the one we tell the hardware to report back + */ + first = txr->next_avail_desc; + txbuf = &txr->tx_buffers[first]; + map = txbuf->map; + + /* + * Map the packet for DMA. + */ +retry: + error = bus_dmamap_load_mbuf_sg(txr->txtag, map, + *m_headp, segs, &nsegs, BUS_DMA_NOWAIT); + + if (__predict_false(error)) { + struct mbuf *m; + + switch (error) { + case EFBIG: + /* Try it again? - one try */ + if (remap == TRUE) { + remap = FALSE; + m = m_defrag(*m_headp, M_NOWAIT); + if (m == NULL) { + adapter->mbuf_defrag_failed++; + m_freem(*m_headp); + *m_headp = NULL; + return (ENOBUFS); + } + *m_headp = m; + goto retry; + } else + return (error); + case ENOMEM: + txr->no_tx_dma_setup++; + return (error); + default: + txr->no_tx_dma_setup++; + m_freem(*m_headp); + *m_headp = NULL; + return (error); + } + } + + /* Make certain there are enough descriptors */ + if (nsegs > txr->tx_avail - 2) { + txr->no_desc_avail++; + bus_dmamap_unload(txr->txtag, map); + return (ENOBUFS); + } + m_head = *m_headp; + + /* + ** Set up the appropriate offload context + ** this will consume the first descriptor + */ + error = igb_tx_ctx_setup(txr, m_head, &cmd_type_len, &olinfo_status); + if (__predict_false(error)) { + m_freem(*m_headp); + *m_headp = NULL; + return (error); + } + + /* 82575 needs the queue index added */ + if (adapter->hw.mac.type == e1000_82575) + olinfo_status |= txr->me << 4; + + i = txr->next_avail_desc; + for (j = 0; j < nsegs; j++) { + bus_size_t seglen; + bus_addr_t segaddr; + + txbuf = &txr->tx_buffers[i]; + txd = &txr->tx_base[i]; + seglen = segs[j].ds_len; + segaddr = htole64(segs[j].ds_addr); + + txd->read.buffer_addr = segaddr; + txd->read.cmd_type_len = htole32(E1000_TXD_CMD_IFCS | + cmd_type_len | seglen); + txd->read.olinfo_status = htole32(olinfo_status); + + if (++i == txr->num_desc) + i = 0; + } + + txd->read.cmd_type_len |= + htole32(E1000_TXD_CMD_EOP | E1000_TXD_CMD_RS); + txr->tx_avail -= nsegs; + txr->next_avail_desc = i; + + txbuf->m_head = m_head; + /* + ** Here we swap the map so the last descriptor, + ** which gets the completion interrupt has the + ** real map, and the first descriptor gets the + ** unused map from this descriptor. + */ + txr->tx_buffers[first].map = txbuf->map; + txbuf->map = map; + bus_dmamap_sync(txr->txtag, map, BUS_DMASYNC_PREWRITE); + + /* Set the EOP descriptor that will be marked done */ + txbuf = &txr->tx_buffers[first]; + txbuf->eop = txd; + + bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + /* + * Advance the Transmit Descriptor Tail (Tdt), this tells the + * hardware that this frame is available to transmit. + */ + ++txr->total_packets; + E1000_WRITE_REG(&adapter->hw, E1000_TDT(txr->me), i); + + return (0); +} +static void +igb_set_promisc(struct adapter *adapter) +{ + struct ifnet *ifp = adapter->ifp; + struct e1000_hw *hw = &adapter->hw; + u32 reg; + + if (adapter->vf_ifp) { + e1000_promisc_set_vf(hw, e1000_promisc_enabled); + return; + } + + reg = E1000_READ_REG(hw, E1000_RCTL); + if (ifp->if_flags & IFF_PROMISC) { + reg |= (E1000_RCTL_UPE | E1000_RCTL_MPE); + E1000_WRITE_REG(hw, E1000_RCTL, reg); + } else if (ifp->if_flags & IFF_ALLMULTI) { + reg |= E1000_RCTL_MPE; + reg &= ~E1000_RCTL_UPE; + E1000_WRITE_REG(hw, E1000_RCTL, reg); + } +} + +static void +igb_disable_promisc(struct adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct ifnet *ifp = adapter->ifp; + u32 reg; + int mcnt = 0; + + if (adapter->vf_ifp) { + e1000_promisc_set_vf(hw, e1000_promisc_disabled); + return; + } + reg = E1000_READ_REG(hw, E1000_RCTL); + reg &= (~E1000_RCTL_UPE); + if (ifp->if_flags & IFF_ALLMULTI) + mcnt = MAX_NUM_MULTICAST_ADDRESSES; + else { + struct ifmultiaddr *ifma; +#if __FreeBSD_version < 800000 + IF_ADDR_LOCK(ifp); +#else + if_maddr_rlock(ifp); +#endif + TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + if (mcnt == MAX_NUM_MULTICAST_ADDRESSES) + break; + mcnt++; + } +#if __FreeBSD_version < 800000 + IF_ADDR_UNLOCK(ifp); +#else + if_maddr_runlock(ifp); +#endif + } + /* Don't disable if in MAX groups */ + if (mcnt < MAX_NUM_MULTICAST_ADDRESSES) + reg &= (~E1000_RCTL_MPE); + E1000_WRITE_REG(hw, E1000_RCTL, reg); +} + + +/********************************************************************* + * Multicast Update + * + * This routine is called whenever multicast address list is updated. + * + **********************************************************************/ + +static void +igb_set_multi(struct adapter *adapter) +{ + struct ifnet *ifp = adapter->ifp; + struct ifmultiaddr *ifma; + u32 reg_rctl = 0; + u8 *mta; + + int mcnt = 0; + + IOCTL_DEBUGOUT("igb_set_multi: begin"); + + mta = adapter->mta; + bzero(mta, sizeof(uint8_t) * ETH_ADDR_LEN * + MAX_NUM_MULTICAST_ADDRESSES); + +#if __FreeBSD_version < 800000 + IF_ADDR_LOCK(ifp); +#else + if_maddr_rlock(ifp); +#endif + TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + + if (mcnt == MAX_NUM_MULTICAST_ADDRESSES) + break; + + bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr), + &mta[mcnt * ETH_ADDR_LEN], ETH_ADDR_LEN); + mcnt++; + } +#if __FreeBSD_version < 800000 + IF_ADDR_UNLOCK(ifp); +#else + if_maddr_runlock(ifp); +#endif + + if (mcnt >= MAX_NUM_MULTICAST_ADDRESSES) { + reg_rctl = E1000_READ_REG(&adapter->hw, E1000_RCTL); + reg_rctl |= E1000_RCTL_MPE; + E1000_WRITE_REG(&adapter->hw, E1000_RCTL, reg_rctl); + } else + e1000_update_mc_addr_list(&adapter->hw, mta, mcnt); +} + + +/********************************************************************* + * Timer routine: + * This routine checks for link status, + * updates statistics, and does the watchdog. + * + **********************************************************************/ + +static void +igb_local_timer(void *arg) +{ + struct adapter *adapter = arg; + device_t dev = adapter->dev; + struct ifnet *ifp = adapter->ifp; + struct tx_ring *txr = adapter->tx_rings; + struct igb_queue *que = adapter->queues; + int hung = 0, busy = 0; + + + IGB_CORE_LOCK_ASSERT(adapter); + + igb_update_link_status(adapter); + igb_update_stats_counters(adapter); + + /* + ** Check the TX queues status + ** - central locked handling of OACTIVE + ** - watchdog only if all queues show hung + */ + for (int i = 0; i < adapter->num_queues; i++, que++, txr++) { + if ((txr->queue_status & IGB_QUEUE_HUNG) && + (adapter->pause_frames == 0)) + ++hung; + if (txr->queue_status & IGB_QUEUE_DEPLETED) + ++busy; + if ((txr->queue_status & IGB_QUEUE_IDLE) == 0) + taskqueue_enqueue(que->tq, &que->que_task); + } + if (hung == adapter->num_queues) + goto timeout; + if (busy == adapter->num_queues) + ifp->if_drv_flags |= IFF_DRV_OACTIVE; + else if ((ifp->if_drv_flags & IFF_DRV_OACTIVE) && + (busy < adapter->num_queues)) + ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; + + adapter->pause_frames = 0; + callout_reset(&adapter->timer, hz, igb_local_timer, adapter); +#ifndef DEVICE_POLLING + /* Schedule all queue interrupts - deadlock protection */ + E1000_WRITE_REG(&adapter->hw, E1000_EICS, adapter->que_mask); +#endif + return; + +timeout: + device_printf(adapter->dev, "Watchdog timeout -- resetting\n"); + device_printf(dev,"Queue(%d) tdh = %d, hw tdt = %d\n", txr->me, + E1000_READ_REG(&adapter->hw, E1000_TDH(txr->me)), + E1000_READ_REG(&adapter->hw, E1000_TDT(txr->me))); + device_printf(dev,"TX(%d) desc avail = %d," + "Next TX to Clean = %d\n", + txr->me, txr->tx_avail, txr->next_to_clean); + adapter->ifp->if_drv_flags &= ~IFF_DRV_RUNNING; + adapter->watchdog_events++; + igb_init_locked(adapter); +} + +static void +igb_update_link_status(struct adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_fc_info *fc = &hw->fc; + struct ifnet *ifp = adapter->ifp; + device_t dev = adapter->dev; + struct tx_ring *txr = adapter->tx_rings; + u32 link_check, thstat, ctrl; + char *flowctl = NULL; + + link_check = thstat = ctrl = 0; + + /* Get the cached link value or read for real */ + switch (hw->phy.media_type) { + case e1000_media_type_copper: + if (hw->mac.get_link_status) { + /* Do the work to read phy */ + e1000_check_for_link(hw); + link_check = !hw->mac.get_link_status; + } else + link_check = TRUE; + break; + case e1000_media_type_fiber: + e1000_check_for_link(hw); + link_check = (E1000_READ_REG(hw, E1000_STATUS) & + E1000_STATUS_LU); + break; + case e1000_media_type_internal_serdes: + e1000_check_for_link(hw); + link_check = adapter->hw.mac.serdes_has_link; + break; + /* VF device is type_unknown */ + case e1000_media_type_unknown: + e1000_check_for_link(hw); + link_check = !hw->mac.get_link_status; + /* Fall thru */ + default: + break; + } + + /* Check for thermal downshift or shutdown */ + if (hw->mac.type == e1000_i350) { + thstat = E1000_READ_REG(hw, E1000_THSTAT); + ctrl = E1000_READ_REG(hw, E1000_CTRL_EXT); + } + + /* Get the flow control for display */ + switch (fc->current_mode) { + case e1000_fc_rx_pause: + flowctl = "RX"; + break; + case e1000_fc_tx_pause: + flowctl = "TX"; + break; + case e1000_fc_full: + flowctl = "Full"; + break; + case e1000_fc_none: + default: + flowctl = "None"; + break; + } + + /* Now we check if a transition has happened */ + if (link_check && (adapter->link_active == 0)) { + e1000_get_speed_and_duplex(&adapter->hw, + &adapter->link_speed, &adapter->link_duplex); + if (bootverbose) + device_printf(dev, "Link is up %d Mbps %s," + " Flow Control: %s\n", + adapter->link_speed, + ((adapter->link_duplex == FULL_DUPLEX) ? + "Full Duplex" : "Half Duplex"), flowctl); + adapter->link_active = 1; + ifp->if_baudrate = adapter->link_speed * 1000000; + if ((ctrl & E1000_CTRL_EXT_LINK_MODE_GMII) && + (thstat & E1000_THSTAT_LINK_THROTTLE)) + device_printf(dev, "Link: thermal downshift\n"); + /* Delay Link Up for Phy update */ + if (((hw->mac.type == e1000_i210) || + (hw->mac.type == e1000_i211)) && + (hw->phy.id == I210_I_PHY_ID)) + msec_delay(I210_LINK_DELAY); + /* Reset if the media type changed. */ + if (hw->dev_spec._82575.media_changed) { + hw->dev_spec._82575.media_changed = false; + adapter->flags |= IGB_MEDIA_RESET; + igb_reset(adapter); + } + /* This can sleep */ + if_link_state_change(ifp, LINK_STATE_UP); + } else if (!link_check && (adapter->link_active == 1)) { + ifp->if_baudrate = adapter->link_speed = 0; + adapter->link_duplex = 0; + if (bootverbose) + device_printf(dev, "Link is Down\n"); + if ((ctrl & E1000_CTRL_EXT_LINK_MODE_GMII) && + (thstat & E1000_THSTAT_PWR_DOWN)) + device_printf(dev, "Link: thermal shutdown\n"); + adapter->link_active = 0; + /* This can sleep */ + if_link_state_change(ifp, LINK_STATE_DOWN); + /* Reset queue state */ + for (int i = 0; i < adapter->num_queues; i++, txr++) + txr->queue_status = IGB_QUEUE_IDLE; + } +} + +/********************************************************************* + * + * This routine disables all traffic on the adapter by issuing a + * global reset on the MAC and deallocates TX/RX buffers. + * + **********************************************************************/ + +static void +igb_stop(void *arg) +{ + struct adapter *adapter = arg; + struct ifnet *ifp = adapter->ifp; + struct tx_ring *txr = adapter->tx_rings; + + IGB_CORE_LOCK_ASSERT(adapter); + + INIT_DEBUGOUT("igb_stop: begin"); + + igb_disable_intr(adapter); + + callout_stop(&adapter->timer); + + /* Tell the stack that the interface is no longer active */ + ifp->if_drv_flags &= ~IFF_DRV_RUNNING; + ifp->if_drv_flags |= IFF_DRV_OACTIVE; + + /* Disarm watchdog timer. */ + for (int i = 0; i < adapter->num_queues; i++, txr++) { + IGB_TX_LOCK(txr); + txr->queue_status = IGB_QUEUE_IDLE; + IGB_TX_UNLOCK(txr); + } + + e1000_reset_hw(&adapter->hw); + E1000_WRITE_REG(&adapter->hw, E1000_WUC, 0); + + e1000_led_off(&adapter->hw); + e1000_cleanup_led(&adapter->hw); +} + + +/********************************************************************* + * + * Determine hardware revision. + * + **********************************************************************/ +static void +igb_identify_hardware(struct adapter *adapter) +{ + device_t dev = adapter->dev; + + /* Make sure our PCI config space has the necessary stuff set */ + pci_enable_busmaster(dev); + adapter->hw.bus.pci_cmd_word = pci_read_config(dev, PCIR_COMMAND, 2); + + /* Save off the information about this board */ + adapter->hw.vendor_id = pci_get_vendor(dev); + adapter->hw.device_id = pci_get_device(dev); + adapter->hw.revision_id = pci_read_config(dev, PCIR_REVID, 1); + adapter->hw.subsystem_vendor_id = + pci_read_config(dev, PCIR_SUBVEND_0, 2); + adapter->hw.subsystem_device_id = + pci_read_config(dev, PCIR_SUBDEV_0, 2); + + /* Set MAC type early for PCI setup */ + e1000_set_mac_type(&adapter->hw); + + /* Are we a VF device? */ + if ((adapter->hw.mac.type == e1000_vfadapt) || + (adapter->hw.mac.type == e1000_vfadapt_i350)) + adapter->vf_ifp = 1; + else + adapter->vf_ifp = 0; +} + +static int +igb_allocate_pci_resources(struct adapter *adapter) +{ + device_t dev = adapter->dev; + int rid; + + rid = PCIR_BAR(0); + adapter->pci_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, + &rid, RF_ACTIVE); + if (adapter->pci_mem == NULL) { + device_printf(dev, "Unable to allocate bus resource: memory\n"); + return (ENXIO); + } + adapter->osdep.mem_bus_space_tag = + rman_get_bustag(adapter->pci_mem); + adapter->osdep.mem_bus_space_handle = + rman_get_bushandle(adapter->pci_mem); + adapter->hw.hw_addr = (u8 *)&adapter->osdep.mem_bus_space_handle; + + adapter->num_queues = 1; /* Defaults for Legacy or MSI */ + + /* This will setup either MSI/X or MSI */ + adapter->msix = igb_setup_msix(adapter); + adapter->hw.back = &adapter->osdep; + + return (0); +} + +/********************************************************************* + * + * Setup the Legacy or MSI Interrupt handler + * + **********************************************************************/ +static int +igb_allocate_legacy(struct adapter *adapter) +{ + device_t dev = adapter->dev; + struct igb_queue *que = adapter->queues; +#ifndef IGB_LEGACY_TX + struct tx_ring *txr = adapter->tx_rings; +#endif + int error, rid = 0; + + /* Turn off all interrupts */ + E1000_WRITE_REG(&adapter->hw, E1000_IMC, 0xffffffff); + + /* MSI RID is 1 */ + if (adapter->msix == 1) + rid = 1; + + /* We allocate a single interrupt resource */ + adapter->res = bus_alloc_resource_any(dev, + SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE); + if (adapter->res == NULL) { + device_printf(dev, "Unable to allocate bus resource: " + "interrupt\n"); + return (ENXIO); + } + +#ifndef IGB_LEGACY_TX + TASK_INIT(&txr->txq_task, 0, igb_deferred_mq_start, txr); +#endif + + /* + * Try allocating a fast interrupt and the associated deferred + * processing contexts. + */ + TASK_INIT(&que->que_task, 0, igb_handle_que, que); + /* Make tasklet for deferred link handling */ + TASK_INIT(&adapter->link_task, 0, igb_handle_link, adapter); + que->tq = taskqueue_create_fast("igb_taskq", M_NOWAIT, + taskqueue_thread_enqueue, &que->tq); + taskqueue_start_threads(&que->tq, 1, PI_NET, "%s taskq", + device_get_nameunit(adapter->dev)); + if ((error = bus_setup_intr(dev, adapter->res, + INTR_TYPE_NET | INTR_MPSAFE, igb_irq_fast, NULL, + adapter, &adapter->tag)) != 0) { + device_printf(dev, "Failed to register fast interrupt " + "handler: %d\n", error); + taskqueue_free(que->tq); + que->tq = NULL; + return (error); + } + + return (0); +} + + +/********************************************************************* + * + * Setup the MSIX Queue Interrupt handlers: + * + **********************************************************************/ +static int +igb_allocate_msix(struct adapter *adapter) +{ + device_t dev = adapter->dev; + struct igb_queue *que = adapter->queues; + int error, rid, vector = 0; + + /* Be sure to start with all interrupts disabled */ + E1000_WRITE_REG(&adapter->hw, E1000_IMC, ~0); + E1000_WRITE_FLUSH(&adapter->hw); + + for (int i = 0; i < adapter->num_queues; i++, vector++, que++) { + rid = vector +1; + que->res = bus_alloc_resource_any(dev, + SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE); + if (que->res == NULL) { + device_printf(dev, + "Unable to allocate bus resource: " + "MSIX Queue Interrupt\n"); + return (ENXIO); + } + error = bus_setup_intr(dev, que->res, + INTR_TYPE_NET | INTR_MPSAFE, NULL, + igb_msix_que, que, &que->tag); + if (error) { + que->res = NULL; + device_printf(dev, "Failed to register Queue handler"); + return (error); + } +#if __FreeBSD_version >= 800504 + bus_describe_intr(dev, que->res, que->tag, "que %d", i); +#endif + que->msix = vector; + if (adapter->hw.mac.type == e1000_82575) + que->eims = E1000_EICR_TX_QUEUE0 << i; + else + que->eims = 1 << vector; + /* + ** Bind the msix vector, and thus the + ** rings to the corresponding cpu. + */ + if (adapter->num_queues > 1) { + if (igb_last_bind_cpu < 0) + igb_last_bind_cpu = CPU_FIRST(); + bus_bind_intr(dev, que->res, igb_last_bind_cpu); + device_printf(dev, + "Bound queue %d to cpu %d\n", + i,igb_last_bind_cpu); + igb_last_bind_cpu = CPU_NEXT(igb_last_bind_cpu); + } +#ifndef IGB_LEGACY_TX + TASK_INIT(&que->txr->txq_task, 0, igb_deferred_mq_start, + que->txr); +#endif + /* Make tasklet for deferred handling */ + TASK_INIT(&que->que_task, 0, igb_handle_que, que); + que->tq = taskqueue_create("igb_que", M_NOWAIT, + taskqueue_thread_enqueue, &que->tq); + taskqueue_start_threads(&que->tq, 1, PI_NET, "%s que", + device_get_nameunit(adapter->dev)); + } + + /* And Link */ + rid = vector + 1; + adapter->res = bus_alloc_resource_any(dev, + SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE); + if (adapter->res == NULL) { + device_printf(dev, + "Unable to allocate bus resource: " + "MSIX Link Interrupt\n"); + return (ENXIO); + } + if ((error = bus_setup_intr(dev, adapter->res, + INTR_TYPE_NET | INTR_MPSAFE, NULL, + igb_msix_link, adapter, &adapter->tag)) != 0) { + device_printf(dev, "Failed to register Link handler"); + return (error); + } +#if __FreeBSD_version >= 800504 + bus_describe_intr(dev, adapter->res, adapter->tag, "link"); +#endif + adapter->linkvec = vector; + + return (0); +} + + +static void +igb_configure_queues(struct adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct igb_queue *que; + u32 tmp, ivar = 0, newitr = 0; + + /* First turn on RSS capability */ + if (adapter->hw.mac.type != e1000_82575) + E1000_WRITE_REG(hw, E1000_GPIE, + E1000_GPIE_MSIX_MODE | E1000_GPIE_EIAME | + E1000_GPIE_PBA | E1000_GPIE_NSICR); + + /* Turn on MSIX */ + switch (adapter->hw.mac.type) { + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + case e1000_vfadapt: + case e1000_vfadapt_i350: + /* RX entries */ + for (int i = 0; i < adapter->num_queues; i++) { + u32 index = i >> 1; + ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index); + que = &adapter->queues[i]; + if (i & 1) { + ivar &= 0xFF00FFFF; + ivar |= (que->msix | E1000_IVAR_VALID) << 16; + } else { + ivar &= 0xFFFFFF00; + ivar |= que->msix | E1000_IVAR_VALID; + } + E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar); + } + /* TX entries */ + for (int i = 0; i < adapter->num_queues; i++) { + u32 index = i >> 1; + ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index); + que = &adapter->queues[i]; + if (i & 1) { + ivar &= 0x00FFFFFF; + ivar |= (que->msix | E1000_IVAR_VALID) << 24; + } else { + ivar &= 0xFFFF00FF; + ivar |= (que->msix | E1000_IVAR_VALID) << 8; + } + E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar); + adapter->que_mask |= que->eims; + } + + /* And for the link interrupt */ + ivar = (adapter->linkvec | E1000_IVAR_VALID) << 8; + adapter->link_mask = 1 << adapter->linkvec; + E1000_WRITE_REG(hw, E1000_IVAR_MISC, ivar); + break; + case e1000_82576: + /* RX entries */ + for (int i = 0; i < adapter->num_queues; i++) { + u32 index = i & 0x7; /* Each IVAR has two entries */ + ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index); + que = &adapter->queues[i]; + if (i < 8) { + ivar &= 0xFFFFFF00; + ivar |= que->msix | E1000_IVAR_VALID; + } else { + ivar &= 0xFF00FFFF; + ivar |= (que->msix | E1000_IVAR_VALID) << 16; + } + E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar); + adapter->que_mask |= que->eims; + } + /* TX entries */ + for (int i = 0; i < adapter->num_queues; i++) { + u32 index = i & 0x7; /* Each IVAR has two entries */ + ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index); + que = &adapter->queues[i]; + if (i < 8) { + ivar &= 0xFFFF00FF; + ivar |= (que->msix | E1000_IVAR_VALID) << 8; + } else { + ivar &= 0x00FFFFFF; + ivar |= (que->msix | E1000_IVAR_VALID) << 24; + } + E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar); + adapter->que_mask |= que->eims; + } + + /* And for the link interrupt */ + ivar = (adapter->linkvec | E1000_IVAR_VALID) << 8; + adapter->link_mask = 1 << adapter->linkvec; + E1000_WRITE_REG(hw, E1000_IVAR_MISC, ivar); + break; + + case e1000_82575: + /* enable MSI-X support*/ + tmp = E1000_READ_REG(hw, E1000_CTRL_EXT); + tmp |= E1000_CTRL_EXT_PBA_CLR; + /* Auto-Mask interrupts upon ICR read. */ + tmp |= E1000_CTRL_EXT_EIAME; + tmp |= E1000_CTRL_EXT_IRCA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, tmp); + + /* Queues */ + for (int i = 0; i < adapter->num_queues; i++) { + que = &adapter->queues[i]; + tmp = E1000_EICR_RX_QUEUE0 << i; + tmp |= E1000_EICR_TX_QUEUE0 << i; + que->eims = tmp; + E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0), + i, que->eims); + adapter->que_mask |= que->eims; + } + + /* Link */ + E1000_WRITE_REG(hw, E1000_MSIXBM(adapter->linkvec), + E1000_EIMS_OTHER); + adapter->link_mask |= E1000_EIMS_OTHER; + default: + break; + } + + /* Set the starting interrupt rate */ + if (igb_max_interrupt_rate > 0) + newitr = (4000000 / igb_max_interrupt_rate) & 0x7FFC; + + if (hw->mac.type == e1000_82575) + newitr |= newitr << 16; + else + newitr |= E1000_EITR_CNT_IGNR; + + for (int i = 0; i < adapter->num_queues; i++) { + que = &adapter->queues[i]; + E1000_WRITE_REG(hw, E1000_EITR(que->msix), newitr); + } + + return; +} + + +static void +igb_free_pci_resources(struct adapter *adapter) +{ + struct igb_queue *que = adapter->queues; + device_t dev = adapter->dev; + int rid; + + /* + ** There is a slight possibility of a failure mode + ** in attach that will result in entering this function + ** before interrupt resources have been initialized, and + ** in that case we do not want to execute the loops below + ** We can detect this reliably by the state of the adapter + ** res pointer. + */ + if (adapter->res == NULL) + goto mem; + + /* + * First release all the interrupt resources: + */ + for (int i = 0; i < adapter->num_queues; i++, que++) { + rid = que->msix + 1; + if (que->tag != NULL) { + bus_teardown_intr(dev, que->res, que->tag); + que->tag = NULL; + } + if (que->res != NULL) + bus_release_resource(dev, + SYS_RES_IRQ, rid, que->res); + } + + /* Clean the Legacy or Link interrupt last */ + if (adapter->linkvec) /* we are doing MSIX */ + rid = adapter->linkvec + 1; + else + (adapter->msix != 0) ? (rid = 1):(rid = 0); + + que = adapter->queues; + if (adapter->tag != NULL) { + taskqueue_drain(que->tq, &adapter->link_task); + bus_teardown_intr(dev, adapter->res, adapter->tag); + adapter->tag = NULL; + } + if (adapter->res != NULL) + bus_release_resource(dev, SYS_RES_IRQ, rid, adapter->res); + + for (int i = 0; i < adapter->num_queues; i++, que++) { + if (que->tq != NULL) { +#ifndef IGB_LEGACY_TX + taskqueue_drain(que->tq, &que->txr->txq_task); +#endif + taskqueue_drain(que->tq, &que->que_task); + taskqueue_free(que->tq); + } + } +mem: + if (adapter->msix) + pci_release_msi(dev); + + if (adapter->msix_mem != NULL) + bus_release_resource(dev, SYS_RES_MEMORY, + adapter->memrid, adapter->msix_mem); + + if (adapter->pci_mem != NULL) + bus_release_resource(dev, SYS_RES_MEMORY, + PCIR_BAR(0), adapter->pci_mem); + +} + +/* + * Setup Either MSI/X or MSI + */ +static int +igb_setup_msix(struct adapter *adapter) +{ + device_t dev = adapter->dev; + int bar, want, queues, msgs, maxqueues; + + /* tuneable override */ + if (igb_enable_msix == 0) + goto msi; + + /* First try MSI/X */ + msgs = pci_msix_count(dev); + if (msgs == 0) + goto msi; + /* + ** Some new devices, as with ixgbe, now may + ** use a different BAR, so we need to keep + ** track of which is used. + */ + adapter->memrid = PCIR_BAR(IGB_MSIX_BAR); + bar = pci_read_config(dev, adapter->memrid, 4); + if (bar == 0) /* use next bar */ + adapter->memrid += 4; + adapter->msix_mem = bus_alloc_resource_any(dev, + SYS_RES_MEMORY, &adapter->memrid, RF_ACTIVE); + if (adapter->msix_mem == NULL) { + /* May not be enabled */ + device_printf(adapter->dev, + "Unable to map MSIX table \n"); + goto msi; + } + + /* Figure out a reasonable auto config value */ + queues = (mp_ncpus > (msgs-1)) ? (msgs-1) : mp_ncpus; + + /* Manual override */ + if (igb_num_queues != 0) + queues = igb_num_queues; + + /* Sanity check based on HW */ + switch (adapter->hw.mac.type) { + case e1000_82575: + maxqueues = 4; + break; + case e1000_82576: + case e1000_82580: + case e1000_i350: + case e1000_i354: + maxqueues = 8; + break; + case e1000_i210: + maxqueues = 4; + break; + case e1000_i211: + maxqueues = 2; + break; + default: /* VF interfaces */ + maxqueues = 1; + break; + } + if (queues > maxqueues) + queues = maxqueues; + + /* Manual override */ + if (igb_num_queues != 0) + queues = igb_num_queues; + + /* + ** One vector (RX/TX pair) per queue + ** plus an additional for Link interrupt + */ + want = queues + 1; + if (msgs >= want) + msgs = want; + else { + device_printf(adapter->dev, + "MSIX Configuration Problem, " + "%d vectors configured, but %d queues wanted!\n", + msgs, want); + goto msi; + } + if ((pci_alloc_msix(dev, &msgs) == 0) && (msgs == want)) { + device_printf(adapter->dev, + "Using MSIX interrupts with %d vectors\n", msgs); + adapter->num_queues = queues; + return (msgs); + } + /* + ** If MSIX alloc failed or provided us with + ** less than needed, free and fall through to MSI + */ + pci_release_msi(dev); + +msi: + if (adapter->msix_mem != NULL) { + bus_release_resource(dev, SYS_RES_MEMORY, + PCIR_BAR(IGB_MSIX_BAR), adapter->msix_mem); + adapter->msix_mem = NULL; + } + msgs = 1; + if (pci_alloc_msi(dev, &msgs) == 0) { + device_printf(adapter->dev," Using an MSI interrupt\n"); + return (msgs); + } + device_printf(adapter->dev," Using a Legacy interrupt\n"); + return (0); +} + +/********************************************************************* + * + * Initialize the DMA Coalescing feature + * + **********************************************************************/ +static void +igb_init_dmac(struct adapter *adapter, u32 pba) +{ + device_t dev = adapter->dev; + struct e1000_hw *hw = &adapter->hw; + u32 dmac, reg = ~E1000_DMACR_DMAC_EN; + u16 hwm; + + if (hw->mac.type == e1000_i211) + return; + + if (hw->mac.type > e1000_82580) { + + if (adapter->dmac == 0) { /* Disabling it */ + E1000_WRITE_REG(hw, E1000_DMACR, reg); + return; + } else + device_printf(dev, "DMA Coalescing enabled\n"); + + /* Set starting threshold */ + E1000_WRITE_REG(hw, E1000_DMCTXTH, 0); + + hwm = 64 * pba - adapter->max_frame_size / 16; + if (hwm < 64 * (pba - 6)) + hwm = 64 * (pba - 6); + reg = E1000_READ_REG(hw, E1000_FCRTC); + reg &= ~E1000_FCRTC_RTH_COAL_MASK; + reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT) + & E1000_FCRTC_RTH_COAL_MASK); + E1000_WRITE_REG(hw, E1000_FCRTC, reg); + + + dmac = pba - adapter->max_frame_size / 512; + if (dmac < pba - 10) + dmac = pba - 10; + reg = E1000_READ_REG(hw, E1000_DMACR); + reg &= ~E1000_DMACR_DMACTHR_MASK; + reg = ((dmac << E1000_DMACR_DMACTHR_SHIFT) + & E1000_DMACR_DMACTHR_MASK); + + /* transition to L0x or L1 if available..*/ + reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK); + + /* Check if status is 2.5Gb backplane connection + * before configuration of watchdog timer, which is + * in msec values in 12.8usec intervals + * watchdog timer= msec values in 32usec intervals + * for non 2.5Gb connection + */ + if (hw->mac.type == e1000_i354) { + int status = E1000_READ_REG(hw, E1000_STATUS); + if ((status & E1000_STATUS_2P5_SKU) && + (!(status & E1000_STATUS_2P5_SKU_OVER))) + reg |= ((adapter->dmac * 5) >> 6); + else + reg |= (adapter->dmac >> 5); + } else { + reg |= (adapter->dmac >> 5); + } + + E1000_WRITE_REG(hw, E1000_DMACR, reg); + + E1000_WRITE_REG(hw, E1000_DMCRTRH, 0); + + /* Set the interval before transition */ + reg = E1000_READ_REG(hw, E1000_DMCTLX); + if (hw->mac.type == e1000_i350) + reg |= IGB_DMCTLX_DCFLUSH_DIS; + /* + ** in 2.5Gb connection, TTLX unit is 0.4 usec + ** which is 0x4*2 = 0xA. But delay is still 4 usec + */ + if (hw->mac.type == e1000_i354) { + int status = E1000_READ_REG(hw, E1000_STATUS); + if ((status & E1000_STATUS_2P5_SKU) && + (!(status & E1000_STATUS_2P5_SKU_OVER))) + reg |= 0xA; + else + reg |= 0x4; + } else { + reg |= 0x4; + } + + E1000_WRITE_REG(hw, E1000_DMCTLX, reg); + + /* free space in tx packet buffer to wake from DMA coal */ + E1000_WRITE_REG(hw, E1000_DMCTXTH, (IGB_TXPBSIZE - + (2 * adapter->max_frame_size)) >> 6); + + /* make low power state decision controlled by DMA coal */ + reg = E1000_READ_REG(hw, E1000_PCIEMISC); + reg &= ~E1000_PCIEMISC_LX_DECISION; + E1000_WRITE_REG(hw, E1000_PCIEMISC, reg); + + } else if (hw->mac.type == e1000_82580) { + u32 reg = E1000_READ_REG(hw, E1000_PCIEMISC); + E1000_WRITE_REG(hw, E1000_PCIEMISC, + reg & ~E1000_PCIEMISC_LX_DECISION); + E1000_WRITE_REG(hw, E1000_DMACR, 0); + } +} + + +/********************************************************************* + * + * Set up an fresh starting state + * + **********************************************************************/ +static void +igb_reset(struct adapter *adapter) +{ + device_t dev = adapter->dev; + struct e1000_hw *hw = &adapter->hw; + struct e1000_fc_info *fc = &hw->fc; + struct ifnet *ifp = adapter->ifp; + u32 pba = 0; + u16 hwm; + + INIT_DEBUGOUT("igb_reset: begin"); + + /* Let the firmware know the OS is in control */ + igb_get_hw_control(adapter); + + /* + * Packet Buffer Allocation (PBA) + * Writing PBA sets the receive portion of the buffer + * the remainder is used for the transmit buffer. + */ + switch (hw->mac.type) { + case e1000_82575: + pba = E1000_PBA_32K; + break; + case e1000_82576: + case e1000_vfadapt: + pba = E1000_READ_REG(hw, E1000_RXPBS); + pba &= E1000_RXPBS_SIZE_MASK_82576; + break; + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_vfadapt_i350: + pba = E1000_READ_REG(hw, E1000_RXPBS); + pba = e1000_rxpbs_adjust_82580(pba); + break; + case e1000_i210: + case e1000_i211: + pba = E1000_PBA_34K; + default: + break; + } + + /* Special needs in case of Jumbo frames */ + if ((hw->mac.type == e1000_82575) && (ifp->if_mtu > ETHERMTU)) { + u32 tx_space, min_tx, min_rx; + pba = E1000_READ_REG(hw, E1000_PBA); + tx_space = pba >> 16; + pba &= 0xffff; + min_tx = (adapter->max_frame_size + + sizeof(struct e1000_tx_desc) - ETHERNET_FCS_SIZE) * 2; + min_tx = roundup2(min_tx, 1024); + min_tx >>= 10; + min_rx = adapter->max_frame_size; + min_rx = roundup2(min_rx, 1024); + min_rx >>= 10; + if (tx_space < min_tx && + ((min_tx - tx_space) < pba)) { + pba = pba - (min_tx - tx_space); + /* + * if short on rx space, rx wins + * and must trump tx adjustment + */ + if (pba < min_rx) + pba = min_rx; + } + E1000_WRITE_REG(hw, E1000_PBA, pba); + } + + INIT_DEBUGOUT1("igb_init: pba=%dK",pba); + + /* + * These parameters control the automatic generation (Tx) and + * response (Rx) to Ethernet PAUSE frames. + * - High water mark should allow for at least two frames to be + * received after sending an XOFF. + * - Low water mark works best when it is very near the high water mark. + * This allows the receiver to restart by sending XON when it has + * drained a bit. + */ + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - 2 * adapter->max_frame_size)); + + if (hw->mac.type < e1000_82576) { + fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */ + fc->low_water = fc->high_water - 8; + } else { + fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */ + fc->low_water = fc->high_water - 16; + } + + fc->pause_time = IGB_FC_PAUSE_TIME; + fc->send_xon = TRUE; + if (adapter->fc) + fc->requested_mode = adapter->fc; + else + fc->requested_mode = e1000_fc_default; + + /* Issue a global reset */ + e1000_reset_hw(hw); + E1000_WRITE_REG(hw, E1000_WUC, 0); + + /* Reset for AutoMediaDetect */ + if (adapter->flags & IGB_MEDIA_RESET) { + e1000_setup_init_funcs(hw, TRUE); + e1000_get_bus_info(hw); + adapter->flags &= ~IGB_MEDIA_RESET; + } + + if (e1000_init_hw(hw) < 0) + device_printf(dev, "Hardware Initialization Failed\n"); + + /* Setup DMA Coalescing */ + igb_init_dmac(adapter, pba); + + E1000_WRITE_REG(&adapter->hw, E1000_VET, ETHERTYPE_VLAN); + e1000_get_phy_info(hw); + e1000_check_for_link(hw); + return; +} + +/********************************************************************* + * + * Setup networking device structure and register an interface. + * + **********************************************************************/ +static int +igb_setup_interface(device_t dev, struct adapter *adapter) +{ + struct ifnet *ifp; + + INIT_DEBUGOUT("igb_setup_interface: begin"); + + ifp = adapter->ifp = if_alloc(IFT_ETHER); + if (ifp == NULL) { + device_printf(dev, "can not allocate ifnet structure\n"); + return (-1); + } + if_initname(ifp, device_get_name(dev), device_get_unit(dev)); + ifp->if_init = igb_init; + ifp->if_softc = adapter; + ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; + ifp->if_ioctl = igb_ioctl; +#ifndef IGB_LEGACY_TX + ifp->if_transmit = igb_mq_start; + ifp->if_qflush = igb_qflush; +#else + ifp->if_start = igb_start; + IFQ_SET_MAXLEN(&ifp->if_snd, adapter->num_tx_desc - 1); + ifp->if_snd.ifq_drv_maxlen = adapter->num_tx_desc - 1; + IFQ_SET_READY(&ifp->if_snd); +#endif + + ether_ifattach(ifp, adapter->hw.mac.addr); + + ifp->if_capabilities = ifp->if_capenable = 0; + + ifp->if_capabilities = IFCAP_HWCSUM | IFCAP_VLAN_HWCSUM; + ifp->if_capabilities |= IFCAP_TSO; + ifp->if_capabilities |= IFCAP_JUMBO_MTU; + ifp->if_capenable = ifp->if_capabilities; + + /* Don't enable LRO by default */ + ifp->if_capabilities |= IFCAP_LRO; + +#ifdef DEVICE_POLLING + ifp->if_capabilities |= IFCAP_POLLING; +#endif + + /* + * Tell the upper layer(s) we + * support full VLAN capability. + */ + ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header); + ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING + | IFCAP_VLAN_HWTSO + | IFCAP_VLAN_MTU; + ifp->if_capenable |= IFCAP_VLAN_HWTAGGING + | IFCAP_VLAN_HWTSO + | IFCAP_VLAN_MTU; + + /* + ** Don't turn this on by default, if vlans are + ** created on another pseudo device (eg. lagg) + ** then vlan events are not passed thru, breaking + ** operation, but with HW FILTER off it works. If + ** using vlans directly on the igb driver you can + ** enable this and get full hardware tag filtering. + */ + ifp->if_capabilities |= IFCAP_VLAN_HWFILTER; + + /* + * Specify the media types supported by this adapter and register + * callbacks to update media and link information + */ + ifmedia_init(&adapter->media, IFM_IMASK, + igb_media_change, igb_media_status); + if ((adapter->hw.phy.media_type == e1000_media_type_fiber) || + (adapter->hw.phy.media_type == e1000_media_type_internal_serdes)) { + ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_SX | IFM_FDX, + 0, NULL); + ifmedia_add(&adapter->media, IFM_ETHER | IFM_1000_SX, 0, NULL); + } else { + ifmedia_add(&adapter->media, IFM_ETHER | IFM_10_T, 0, NULL); + ifmedia_add(&adapter->media, IFM_ETHER | IFM_10_T | IFM_FDX, + 0, NULL); + ifmedia_add(&adapter->media, IFM_ETHER | IFM_100_TX, + 0, NULL); + ifmedia_add(&adapter->media, IFM_ETHER | IFM_100_TX | IFM_FDX, + 0, NULL); + if (adapter->hw.phy.type != e1000_phy_ife) { + ifmedia_add(&adapter->media, + IFM_ETHER | IFM_1000_T | IFM_FDX, 0, NULL); + ifmedia_add(&adapter->media, + IFM_ETHER | IFM_1000_T, 0, NULL); + } + } + ifmedia_add(&adapter->media, IFM_ETHER | IFM_AUTO, 0, NULL); + ifmedia_set(&adapter->media, IFM_ETHER | IFM_AUTO); + return (0); +} + + +/* + * Manage DMA'able memory. + */ +static void +igb_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) +{ + if (error) + return; + *(bus_addr_t *) arg = segs[0].ds_addr; +} + +static int +igb_dma_malloc(struct adapter *adapter, bus_size_t size, + struct igb_dma_alloc *dma, int mapflags) +{ + int error; + + error = bus_dma_tag_create(bus_get_dma_tag(adapter->dev), /* parent */ + IGB_DBA_ALIGN, 0, /* alignment, bounds */ + BUS_SPACE_MAXADDR, /* lowaddr */ + BUS_SPACE_MAXADDR, /* highaddr */ + NULL, NULL, /* filter, filterarg */ + size, /* maxsize */ + 1, /* nsegments */ + size, /* maxsegsize */ + 0, /* flags */ + NULL, /* lockfunc */ + NULL, /* lockarg */ + &dma->dma_tag); + if (error) { + device_printf(adapter->dev, + "%s: bus_dma_tag_create failed: %d\n", + __func__, error); + goto fail_0; + } + + error = bus_dmamem_alloc(dma->dma_tag, (void**) &dma->dma_vaddr, + BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &dma->dma_map); + if (error) { + device_printf(adapter->dev, + "%s: bus_dmamem_alloc(%ju) failed: %d\n", + __func__, (uintmax_t)size, error); + goto fail_2; + } + + dma->dma_paddr = 0; + error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, + size, igb_dmamap_cb, &dma->dma_paddr, mapflags | BUS_DMA_NOWAIT); + if (error || dma->dma_paddr == 0) { + device_printf(adapter->dev, + "%s: bus_dmamap_load failed: %d\n", + __func__, error); + goto fail_3; + } + + return (0); + +fail_3: + bus_dmamap_unload(dma->dma_tag, dma->dma_map); +fail_2: + bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); + bus_dma_tag_destroy(dma->dma_tag); +fail_0: + dma->dma_map = NULL; + dma->dma_tag = NULL; + + return (error); +} + +static void +igb_dma_free(struct adapter *adapter, struct igb_dma_alloc *dma) +{ + if (dma->dma_tag == NULL) + return; + if (dma->dma_map != NULL) { + bus_dmamap_sync(dma->dma_tag, dma->dma_map, + BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(dma->dma_tag, dma->dma_map); + bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); + dma->dma_map = NULL; + } + bus_dma_tag_destroy(dma->dma_tag); + dma->dma_tag = NULL; +} + + +/********************************************************************* + * + * Allocate memory for the transmit and receive rings, and then + * the descriptors associated with each, called only once at attach. + * + **********************************************************************/ +static int +igb_allocate_queues(struct adapter *adapter) +{ + device_t dev = adapter->dev; + struct igb_queue *que = NULL; + struct tx_ring *txr = NULL; + struct rx_ring *rxr = NULL; + int rsize, tsize, error = E1000_SUCCESS; + int txconf = 0, rxconf = 0; + + /* First allocate the top level queue structs */ + if (!(adapter->queues = + (struct igb_queue *) malloc(sizeof(struct igb_queue) * + adapter->num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) { + device_printf(dev, "Unable to allocate queue memory\n"); + error = ENOMEM; + goto fail; + } + + /* Next allocate the TX ring struct memory */ + if (!(adapter->tx_rings = + (struct tx_ring *) malloc(sizeof(struct tx_ring) * + adapter->num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) { + device_printf(dev, "Unable to allocate TX ring memory\n"); + error = ENOMEM; + goto tx_fail; + } + + /* Now allocate the RX */ + if (!(adapter->rx_rings = + (struct rx_ring *) malloc(sizeof(struct rx_ring) * + adapter->num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) { + device_printf(dev, "Unable to allocate RX ring memory\n"); + error = ENOMEM; + goto rx_fail; + } + + tsize = roundup2(adapter->num_tx_desc * + sizeof(union e1000_adv_tx_desc), IGB_DBA_ALIGN); + /* + * Now set up the TX queues, txconf is needed to handle the + * possibility that things fail midcourse and we need to + * undo memory gracefully + */ + for (int i = 0; i < adapter->num_queues; i++, txconf++) { + /* Set up some basics */ + txr = &adapter->tx_rings[i]; + txr->adapter = adapter; + txr->me = i; + txr->num_desc = adapter->num_tx_desc; + + /* Initialize the TX lock */ + snprintf(txr->mtx_name, sizeof(txr->mtx_name), "%s:tx(%d)", + device_get_nameunit(dev), txr->me); + mtx_init(&txr->tx_mtx, txr->mtx_name, NULL, MTX_DEF); + + if (igb_dma_malloc(adapter, tsize, + &txr->txdma, BUS_DMA_NOWAIT)) { + device_printf(dev, + "Unable to allocate TX Descriptor memory\n"); + error = ENOMEM; + goto err_tx_desc; + } + txr->tx_base = (union e1000_adv_tx_desc *)txr->txdma.dma_vaddr; + bzero((void *)txr->tx_base, tsize); + + /* Now allocate transmit buffers for the ring */ + if (igb_allocate_transmit_buffers(txr)) { + device_printf(dev, + "Critical Failure setting up transmit buffers\n"); + error = ENOMEM; + goto err_tx_desc; + } +#ifndef IGB_LEGACY_TX + /* Allocate a buf ring */ + txr->br = buf_ring_alloc(igb_buf_ring_size, M_DEVBUF, + M_WAITOK, &txr->tx_mtx); +#endif + } + + /* + * Next the RX queues... + */ + rsize = roundup2(adapter->num_rx_desc * + sizeof(union e1000_adv_rx_desc), IGB_DBA_ALIGN); + for (int i = 0; i < adapter->num_queues; i++, rxconf++) { + rxr = &adapter->rx_rings[i]; + rxr->adapter = adapter; + rxr->me = i; + + /* Initialize the RX lock */ + snprintf(rxr->mtx_name, sizeof(rxr->mtx_name), "%s:rx(%d)", + device_get_nameunit(dev), txr->me); + mtx_init(&rxr->rx_mtx, rxr->mtx_name, NULL, MTX_DEF); + + if (igb_dma_malloc(adapter, rsize, + &rxr->rxdma, BUS_DMA_NOWAIT)) { + device_printf(dev, + "Unable to allocate RxDescriptor memory\n"); + error = ENOMEM; + goto err_rx_desc; + } + rxr->rx_base = (union e1000_adv_rx_desc *)rxr->rxdma.dma_vaddr; + bzero((void *)rxr->rx_base, rsize); + + /* Allocate receive buffers for the ring*/ + if (igb_allocate_receive_buffers(rxr)) { + device_printf(dev, + "Critical Failure setting up receive buffers\n"); + error = ENOMEM; + goto err_rx_desc; + } + } + + /* + ** Finally set up the queue holding structs + */ + for (int i = 0; i < adapter->num_queues; i++) { + que = &adapter->queues[i]; + que->adapter = adapter; + que->txr = &adapter->tx_rings[i]; + que->rxr = &adapter->rx_rings[i]; + } + + return (0); + +err_rx_desc: + for (rxr = adapter->rx_rings; rxconf > 0; rxr++, rxconf--) + igb_dma_free(adapter, &rxr->rxdma); +err_tx_desc: + for (txr = adapter->tx_rings; txconf > 0; txr++, txconf--) + igb_dma_free(adapter, &txr->txdma); + free(adapter->rx_rings, M_DEVBUF); +rx_fail: +#ifndef IGB_LEGACY_TX + buf_ring_free(txr->br, M_DEVBUF); +#endif + free(adapter->tx_rings, M_DEVBUF); +tx_fail: + free(adapter->queues, M_DEVBUF); +fail: + return (error); +} + +/********************************************************************* + * + * Allocate memory for tx_buffer structures. The tx_buffer stores all + * the information needed to transmit a packet on the wire. This is + * called only once at attach, setup is done every reset. + * + **********************************************************************/ +static int +igb_allocate_transmit_buffers(struct tx_ring *txr) +{ + struct adapter *adapter = txr->adapter; + device_t dev = adapter->dev; + struct igb_tx_buf *txbuf; + int error, i; + + /* + * Setup DMA descriptor areas. + */ + if ((error = bus_dma_tag_create(bus_get_dma_tag(dev), + 1, 0, /* alignment, bounds */ + BUS_SPACE_MAXADDR, /* lowaddr */ + BUS_SPACE_MAXADDR, /* highaddr */ + NULL, NULL, /* filter, filterarg */ + IGB_TSO_SIZE, /* maxsize */ + IGB_MAX_SCATTER, /* nsegments */ + PAGE_SIZE, /* maxsegsize */ + 0, /* flags */ + NULL, /* lockfunc */ + NULL, /* lockfuncarg */ + &txr->txtag))) { + device_printf(dev,"Unable to allocate TX DMA tag\n"); + goto fail; + } + + if (!(txr->tx_buffers = + (struct igb_tx_buf *) malloc(sizeof(struct igb_tx_buf) * + adapter->num_tx_desc, M_DEVBUF, M_NOWAIT | M_ZERO))) { + device_printf(dev, "Unable to allocate tx_buffer memory\n"); + error = ENOMEM; + goto fail; + } + + /* Create the descriptor buffer dma maps */ + txbuf = txr->tx_buffers; + for (i = 0; i < adapter->num_tx_desc; i++, txbuf++) { + error = bus_dmamap_create(txr->txtag, 0, &txbuf->map); + if (error != 0) { + device_printf(dev, "Unable to create TX DMA map\n"); + goto fail; + } + } + + return 0; +fail: + /* We free all, it handles case where we are in the middle */ + igb_free_transmit_structures(adapter); + return (error); +} + +/********************************************************************* + * + * Initialize a transmit ring. + * + **********************************************************************/ +static void +igb_setup_transmit_ring(struct tx_ring *txr) +{ + struct adapter *adapter = txr->adapter; + struct igb_tx_buf *txbuf; + int i; +#ifdef DEV_NETMAP + struct netmap_adapter *na = NA(adapter->ifp); + struct netmap_slot *slot; +#endif /* DEV_NETMAP */ + + /* Clear the old descriptor contents */ + IGB_TX_LOCK(txr); +#ifdef DEV_NETMAP + slot = netmap_reset(na, NR_TX, txr->me, 0); +#endif /* DEV_NETMAP */ + bzero((void *)txr->tx_base, + (sizeof(union e1000_adv_tx_desc)) * adapter->num_tx_desc); + /* Reset indices */ + txr->next_avail_desc = 0; + txr->next_to_clean = 0; + + /* Free any existing tx buffers. */ + txbuf = txr->tx_buffers; + for (i = 0; i < adapter->num_tx_desc; i++, txbuf++) { + if (txbuf->m_head != NULL) { + bus_dmamap_sync(txr->txtag, txbuf->map, + BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(txr->txtag, txbuf->map); + m_freem(txbuf->m_head); + txbuf->m_head = NULL; + } +#ifdef DEV_NETMAP + if (slot) { + int si = netmap_idx_n2k(&na->tx_rings[txr->me], i); + /* no need to set the address */ + netmap_load_map(txr->txtag, txbuf->map, NMB(slot + si)); + } +#endif /* DEV_NETMAP */ + /* clear the watch index */ + txbuf->eop = NULL; + } + + /* Set number of descriptors available */ + txr->tx_avail = adapter->num_tx_desc; + + bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + IGB_TX_UNLOCK(txr); +} + +/********************************************************************* + * + * Initialize all transmit rings. + * + **********************************************************************/ +static void +igb_setup_transmit_structures(struct adapter *adapter) +{ + struct tx_ring *txr = adapter->tx_rings; + + for (int i = 0; i < adapter->num_queues; i++, txr++) + igb_setup_transmit_ring(txr); + + return; +} + +/********************************************************************* + * + * Enable transmit unit. + * + **********************************************************************/ +static void +igb_initialize_transmit_units(struct adapter *adapter) +{ + struct tx_ring *txr = adapter->tx_rings; + struct e1000_hw *hw = &adapter->hw; + u32 tctl, txdctl; + + INIT_DEBUGOUT("igb_initialize_transmit_units: begin"); + tctl = txdctl = 0; + + /* Setup the Tx Descriptor Rings */ + for (int i = 0; i < adapter->num_queues; i++, txr++) { + u64 bus_addr = txr->txdma.dma_paddr; + + E1000_WRITE_REG(hw, E1000_TDLEN(i), + adapter->num_tx_desc * sizeof(struct e1000_tx_desc)); + E1000_WRITE_REG(hw, E1000_TDBAH(i), + (uint32_t)(bus_addr >> 32)); + E1000_WRITE_REG(hw, E1000_TDBAL(i), + (uint32_t)bus_addr); + + /* Setup the HW Tx Head and Tail descriptor pointers */ + E1000_WRITE_REG(hw, E1000_TDT(i), 0); + E1000_WRITE_REG(hw, E1000_TDH(i), 0); + + HW_DEBUGOUT2("Base = %x, Length = %x\n", + E1000_READ_REG(hw, E1000_TDBAL(i)), + E1000_READ_REG(hw, E1000_TDLEN(i))); + + txr->queue_status = IGB_QUEUE_IDLE; + + txdctl |= IGB_TX_PTHRESH; + txdctl |= IGB_TX_HTHRESH << 8; + txdctl |= IGB_TX_WTHRESH << 16; + txdctl |= E1000_TXDCTL_QUEUE_ENABLE; + E1000_WRITE_REG(hw, E1000_TXDCTL(i), txdctl); + } + + if (adapter->vf_ifp) + return; + + e1000_config_collision_dist(hw); + + /* Program the Transmit Control Register */ + tctl = E1000_READ_REG(hw, E1000_TCTL); + tctl &= ~E1000_TCTL_CT; + tctl |= (E1000_TCTL_PSP | E1000_TCTL_RTLC | E1000_TCTL_EN | + (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT)); + + /* This write will effectively turn on the transmit unit. */ + E1000_WRITE_REG(hw, E1000_TCTL, tctl); +} + +/********************************************************************* + * + * Free all transmit rings. + * + **********************************************************************/ +static void +igb_free_transmit_structures(struct adapter *adapter) +{ + struct tx_ring *txr = adapter->tx_rings; + + for (int i = 0; i < adapter->num_queues; i++, txr++) { + IGB_TX_LOCK(txr); + igb_free_transmit_buffers(txr); + igb_dma_free(adapter, &txr->txdma); + IGB_TX_UNLOCK(txr); + IGB_TX_LOCK_DESTROY(txr); + } + free(adapter->tx_rings, M_DEVBUF); +} + +/********************************************************************* + * + * Free transmit ring related data structures. + * + **********************************************************************/ +static void +igb_free_transmit_buffers(struct tx_ring *txr) +{ + struct adapter *adapter = txr->adapter; + struct igb_tx_buf *tx_buffer; + int i; + + INIT_DEBUGOUT("free_transmit_ring: begin"); + + if (txr->tx_buffers == NULL) + return; + + tx_buffer = txr->tx_buffers; + for (i = 0; i < adapter->num_tx_desc; i++, tx_buffer++) { + if (tx_buffer->m_head != NULL) { + bus_dmamap_sync(txr->txtag, tx_buffer->map, + BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(txr->txtag, + tx_buffer->map); + m_freem(tx_buffer->m_head); + tx_buffer->m_head = NULL; + if (tx_buffer->map != NULL) { + bus_dmamap_destroy(txr->txtag, + tx_buffer->map); + tx_buffer->map = NULL; + } + } else if (tx_buffer->map != NULL) { + bus_dmamap_unload(txr->txtag, + tx_buffer->map); + bus_dmamap_destroy(txr->txtag, + tx_buffer->map); + tx_buffer->map = NULL; + } + } +#ifndef IGB_LEGACY_TX + if (txr->br != NULL) + buf_ring_free(txr->br, M_DEVBUF); +#endif + if (txr->tx_buffers != NULL) { + free(txr->tx_buffers, M_DEVBUF); + txr->tx_buffers = NULL; + } + if (txr->txtag != NULL) { + bus_dma_tag_destroy(txr->txtag); + txr->txtag = NULL; + } + return; +} + +/********************************************************************** + * + * Setup work for hardware segmentation offload (TSO) on + * adapters using advanced tx descriptors + * + **********************************************************************/ +static int +igb_tso_setup(struct tx_ring *txr, struct mbuf *mp, + u32 *cmd_type_len, u32 *olinfo_status) +{ + struct adapter *adapter = txr->adapter; + struct e1000_adv_tx_context_desc *TXD; + u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0; + u32 mss_l4len_idx = 0, paylen; + u16 vtag = 0, eh_type; + int ctxd, ehdrlen, ip_hlen, tcp_hlen; + struct ether_vlan_header *eh; +#ifdef INET6 + struct ip6_hdr *ip6; +#endif +#ifdef INET + struct ip *ip; +#endif + struct tcphdr *th; + + + /* + * Determine where frame payload starts. + * Jump over vlan headers if already present + */ + eh = mtod(mp, struct ether_vlan_header *); + if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) { + ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN; + eh_type = eh->evl_proto; + } else { + ehdrlen = ETHER_HDR_LEN; + eh_type = eh->evl_encap_proto; + } + + switch (ntohs(eh_type)) { +#ifdef INET6 + case ETHERTYPE_IPV6: + ip6 = (struct ip6_hdr *)(mp->m_data + ehdrlen); +#if __FreeBSD_version < 901504 + /* TSO6 is not supported on stable/8 */ + return (ENXIO); +#else + /* XXX-BZ For now we do not pretend to support ext. hdrs. */ + if (ip6->ip6_nxt != IPPROTO_TCP) + return (ENXIO); + ip_hlen = sizeof(struct ip6_hdr); + ip6 = (struct ip6_hdr *)(mp->m_data + ehdrlen); + th = (struct tcphdr *)((caddr_t)ip6 + ip_hlen); + th->th_sum = in6_cksum_pseudo(ip6, 0, IPPROTO_TCP, 0); + type_tucmd_mlhl |= E1000_ADVTXD_TUCMD_IPV6; + break; +#endif /* __FreeBSD_version */ +#endif +#ifdef INET + case ETHERTYPE_IP: + ip = (struct ip *)(mp->m_data + ehdrlen); + if (ip->ip_p != IPPROTO_TCP) + return (ENXIO); + ip->ip_sum = 0; + ip_hlen = ip->ip_hl << 2; + th = (struct tcphdr *)((caddr_t)ip + ip_hlen); + th->th_sum = in_pseudo(ip->ip_src.s_addr, + ip->ip_dst.s_addr, htons(IPPROTO_TCP)); + type_tucmd_mlhl |= E1000_ADVTXD_TUCMD_IPV4; + /* Tell transmit desc to also do IPv4 checksum. */ + *olinfo_status |= E1000_TXD_POPTS_IXSM << 8; + break; +#endif + default: + panic("%s: CSUM_TSO but no supported IP version (0x%04x)", + __func__, ntohs(eh_type)); + break; + } + + ctxd = txr->next_avail_desc; + TXD = (struct e1000_adv_tx_context_desc *) &txr->tx_base[ctxd]; + + tcp_hlen = th->th_off << 2; + + /* This is used in the transmit desc in encap */ + paylen = mp->m_pkthdr.len - ehdrlen - ip_hlen - tcp_hlen; + + /* VLAN MACLEN IPLEN */ + if (mp->m_flags & M_VLANTAG) { + vtag = htole16(mp->m_pkthdr.ether_vtag); + vlan_macip_lens |= (vtag << E1000_ADVTXD_VLAN_SHIFT); + } + + vlan_macip_lens |= ehdrlen << E1000_ADVTXD_MACLEN_SHIFT; + vlan_macip_lens |= ip_hlen; + TXD->vlan_macip_lens = htole32(vlan_macip_lens); + + /* ADV DTYPE TUCMD */ + type_tucmd_mlhl |= E1000_ADVTXD_DCMD_DEXT | E1000_ADVTXD_DTYP_CTXT; + type_tucmd_mlhl |= E1000_ADVTXD_TUCMD_L4T_TCP; + TXD->type_tucmd_mlhl = htole32(type_tucmd_mlhl); + + /* MSS L4LEN IDX */ + mss_l4len_idx |= (mp->m_pkthdr.tso_segsz << E1000_ADVTXD_MSS_SHIFT); + mss_l4len_idx |= (tcp_hlen << E1000_ADVTXD_L4LEN_SHIFT); + /* 82575 needs the queue index added */ + if (adapter->hw.mac.type == e1000_82575) + mss_l4len_idx |= txr->me << 4; + TXD->mss_l4len_idx = htole32(mss_l4len_idx); + + TXD->seqnum_seed = htole32(0); + + if (++ctxd == txr->num_desc) + ctxd = 0; + + txr->tx_avail--; + txr->next_avail_desc = ctxd; + *cmd_type_len |= E1000_ADVTXD_DCMD_TSE; + *olinfo_status |= E1000_TXD_POPTS_TXSM << 8; + *olinfo_status |= paylen << E1000_ADVTXD_PAYLEN_SHIFT; + ++txr->tso_tx; + return (0); +} + +/********************************************************************* + * + * Advanced Context Descriptor setup for VLAN, CSUM or TSO + * + **********************************************************************/ + +static int +igb_tx_ctx_setup(struct tx_ring *txr, struct mbuf *mp, + u32 *cmd_type_len, u32 *olinfo_status) +{ + struct e1000_adv_tx_context_desc *TXD; + struct adapter *adapter = txr->adapter; + struct ether_vlan_header *eh; + struct ip *ip; + struct ip6_hdr *ip6; + u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0, mss_l4len_idx = 0; + int ehdrlen, ip_hlen = 0; + u16 etype; + u8 ipproto = 0; + int offload = TRUE; + int ctxd = txr->next_avail_desc; + u16 vtag = 0; + + /* First check if TSO is to be used */ + if (mp->m_pkthdr.csum_flags & CSUM_TSO) + return (igb_tso_setup(txr, mp, cmd_type_len, olinfo_status)); + + if ((mp->m_pkthdr.csum_flags & CSUM_OFFLOAD) == 0) + offload = FALSE; + + /* Indicate the whole packet as payload when not doing TSO */ + *olinfo_status |= mp->m_pkthdr.len << E1000_ADVTXD_PAYLEN_SHIFT; + + /* Now ready a context descriptor */ + TXD = (struct e1000_adv_tx_context_desc *) &txr->tx_base[ctxd]; + + /* + ** In advanced descriptors the vlan tag must + ** be placed into the context descriptor. Hence + ** we need to make one even if not doing offloads. + */ + if (mp->m_flags & M_VLANTAG) { + vtag = htole16(mp->m_pkthdr.ether_vtag); + vlan_macip_lens |= (vtag << E1000_ADVTXD_VLAN_SHIFT); + } else if (offload == FALSE) /* ... no offload to do */ + return (0); + + /* + * Determine where frame payload starts. + * Jump over vlan headers if already present, + * helpful for QinQ too. + */ + eh = mtod(mp, struct ether_vlan_header *); + if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) { + etype = ntohs(eh->evl_proto); + ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN; + } else { + etype = ntohs(eh->evl_encap_proto); + ehdrlen = ETHER_HDR_LEN; + } + + /* Set the ether header length */ + vlan_macip_lens |= ehdrlen << E1000_ADVTXD_MACLEN_SHIFT; + + switch (etype) { + case ETHERTYPE_IP: + ip = (struct ip *)(mp->m_data + ehdrlen); + ip_hlen = ip->ip_hl << 2; + ipproto = ip->ip_p; + type_tucmd_mlhl |= E1000_ADVTXD_TUCMD_IPV4; + break; + case ETHERTYPE_IPV6: + ip6 = (struct ip6_hdr *)(mp->m_data + ehdrlen); + ip_hlen = sizeof(struct ip6_hdr); + /* XXX-BZ this will go badly in case of ext hdrs. */ + ipproto = ip6->ip6_nxt; + type_tucmd_mlhl |= E1000_ADVTXD_TUCMD_IPV6; + break; + default: + offload = FALSE; + break; + } + + vlan_macip_lens |= ip_hlen; + type_tucmd_mlhl |= E1000_ADVTXD_DCMD_DEXT | E1000_ADVTXD_DTYP_CTXT; + + switch (ipproto) { + case IPPROTO_TCP: + if (mp->m_pkthdr.csum_flags & CSUM_TCP) + type_tucmd_mlhl |= E1000_ADVTXD_TUCMD_L4T_TCP; + break; + case IPPROTO_UDP: + if (mp->m_pkthdr.csum_flags & CSUM_UDP) + type_tucmd_mlhl |= E1000_ADVTXD_TUCMD_L4T_UDP; + break; + +#if __FreeBSD_version >= 800000 + case IPPROTO_SCTP: + if (mp->m_pkthdr.csum_flags & CSUM_SCTP) + type_tucmd_mlhl |= E1000_ADVTXD_TUCMD_L4T_SCTP; + break; +#endif + default: + offload = FALSE; + break; + } + + if (offload) /* For the TX descriptor setup */ + *olinfo_status |= E1000_TXD_POPTS_TXSM << 8; + + /* 82575 needs the queue index added */ + if (adapter->hw.mac.type == e1000_82575) + mss_l4len_idx = txr->me << 4; + + /* Now copy bits into descriptor */ + TXD->vlan_macip_lens = htole32(vlan_macip_lens); + TXD->type_tucmd_mlhl = htole32(type_tucmd_mlhl); + TXD->seqnum_seed = htole32(0); + TXD->mss_l4len_idx = htole32(mss_l4len_idx); + + /* We've consumed the first desc, adjust counters */ + if (++ctxd == txr->num_desc) + ctxd = 0; + txr->next_avail_desc = ctxd; + --txr->tx_avail; + + return (0); +} + +/********************************************************************** + * + * Examine each tx_buffer in the used queue. If the hardware is done + * processing the packet then free associated resources. The + * tx_buffer is put back on the free queue. + * + * TRUE return means there's work in the ring to clean, FALSE its empty. + **********************************************************************/ +static bool +igb_txeof(struct tx_ring *txr) +{ + struct adapter *adapter = txr->adapter; + struct ifnet *ifp = adapter->ifp; + u32 work, processed = 0; + u16 limit = txr->process_limit; + struct igb_tx_buf *buf; + union e1000_adv_tx_desc *txd; + + mtx_assert(&txr->tx_mtx, MA_OWNED); + +#ifdef DEV_NETMAP + if (netmap_tx_irq(ifp, txr->me)) + return (FALSE); +#endif /* DEV_NETMAP */ + + if (txr->tx_avail == txr->num_desc) { + txr->queue_status = IGB_QUEUE_IDLE; + return FALSE; + } + + /* Get work starting point */ + work = txr->next_to_clean; + buf = &txr->tx_buffers[work]; + txd = &txr->tx_base[work]; + work -= txr->num_desc; /* The distance to ring end */ + bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map, + BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); + do { + union e1000_adv_tx_desc *eop = buf->eop; + if (eop == NULL) /* No work */ + break; + + if ((eop->wb.status & E1000_TXD_STAT_DD) == 0) + break; /* I/O not complete */ + + if (buf->m_head) { + txr->bytes += + buf->m_head->m_pkthdr.len; + bus_dmamap_sync(txr->txtag, + buf->map, + BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(txr->txtag, + buf->map); + m_freem(buf->m_head); + buf->m_head = NULL; + } + buf->eop = NULL; + ++txr->tx_avail; + + /* We clean the range if multi segment */ + while (txd != eop) { + ++txd; + ++buf; + ++work; + /* wrap the ring? */ + if (__predict_false(!work)) { + work -= txr->num_desc; + buf = txr->tx_buffers; + txd = txr->tx_base; + } + if (buf->m_head) { + txr->bytes += + buf->m_head->m_pkthdr.len; + bus_dmamap_sync(txr->txtag, + buf->map, + BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(txr->txtag, + buf->map); + m_freem(buf->m_head); + buf->m_head = NULL; + } + ++txr->tx_avail; + buf->eop = NULL; + + } + ++txr->packets; + ++processed; + ++ifp->if_opackets; + txr->watchdog_time = ticks; + + /* Try the next packet */ + ++txd; + ++buf; + ++work; + /* reset with a wrap */ + if (__predict_false(!work)) { + work -= txr->num_desc; + buf = txr->tx_buffers; + txd = txr->tx_base; + } + prefetch(txd); + } while (__predict_true(--limit)); + + bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + + work += txr->num_desc; + txr->next_to_clean = work; + + /* + ** Watchdog calculation, we know there's + ** work outstanding or the first return + ** would have been taken, so none processed + ** for too long indicates a hang. + */ + if ((!processed) && ((ticks - txr->watchdog_time) > IGB_WATCHDOG)) + txr->queue_status |= IGB_QUEUE_HUNG; + + if (txr->tx_avail >= IGB_QUEUE_THRESHOLD) + txr->queue_status &= ~IGB_QUEUE_DEPLETED; + + if (txr->tx_avail == txr->num_desc) { + txr->queue_status = IGB_QUEUE_IDLE; + return (FALSE); + } + + return (TRUE); +} + +/********************************************************************* + * + * Refresh mbuf buffers for RX descriptor rings + * - now keeps its own state so discards due to resource + * exhaustion are unnecessary, if an mbuf cannot be obtained + * it just returns, keeping its placeholder, thus it can simply + * be recalled to try again. + * + **********************************************************************/ +static void +igb_refresh_mbufs(struct rx_ring *rxr, int limit) +{ + struct adapter *adapter = rxr->adapter; + bus_dma_segment_t hseg[1]; + bus_dma_segment_t pseg[1]; + struct igb_rx_buf *rxbuf; + struct mbuf *mh, *mp; + int i, j, nsegs, error; + bool refreshed = FALSE; + + i = j = rxr->next_to_refresh; + /* + ** Get one descriptor beyond + ** our work mark to control + ** the loop. + */ + if (++j == adapter->num_rx_desc) + j = 0; + + while (j != limit) { + rxbuf = &rxr->rx_buffers[i]; + /* No hdr mbuf used with header split off */ + if (rxr->hdr_split == FALSE) + goto no_split; + if (rxbuf->m_head == NULL) { + mh = m_gethdr(M_NOWAIT, MT_DATA); + if (mh == NULL) + goto update; + } else + mh = rxbuf->m_head; + + mh->m_pkthdr.len = mh->m_len = MHLEN; + mh->m_len = MHLEN; + mh->m_flags |= M_PKTHDR; + /* Get the memory mapping */ + error = bus_dmamap_load_mbuf_sg(rxr->htag, + rxbuf->hmap, mh, hseg, &nsegs, BUS_DMA_NOWAIT); + if (error != 0) { + printf("Refresh mbufs: hdr dmamap load" + " failure - %d\n", error); + m_free(mh); + rxbuf->m_head = NULL; + goto update; + } + rxbuf->m_head = mh; + bus_dmamap_sync(rxr->htag, rxbuf->hmap, + BUS_DMASYNC_PREREAD); + rxr->rx_base[i].read.hdr_addr = + htole64(hseg[0].ds_addr); +no_split: + if (rxbuf->m_pack == NULL) { + mp = m_getjcl(M_NOWAIT, MT_DATA, + M_PKTHDR, adapter->rx_mbuf_sz); + if (mp == NULL) + goto update; + } else + mp = rxbuf->m_pack; + + mp->m_pkthdr.len = mp->m_len = adapter->rx_mbuf_sz; + /* Get the memory mapping */ + error = bus_dmamap_load_mbuf_sg(rxr->ptag, + rxbuf->pmap, mp, pseg, &nsegs, BUS_DMA_NOWAIT); + if (error != 0) { + printf("Refresh mbufs: payload dmamap load" + " failure - %d\n", error); + m_free(mp); + rxbuf->m_pack = NULL; + goto update; + } + rxbuf->m_pack = mp; + bus_dmamap_sync(rxr->ptag, rxbuf->pmap, + BUS_DMASYNC_PREREAD); + rxr->rx_base[i].read.pkt_addr = + htole64(pseg[0].ds_addr); + refreshed = TRUE; /* I feel wefreshed :) */ + + i = j; /* our next is precalculated */ + rxr->next_to_refresh = i; + if (++j == adapter->num_rx_desc) + j = 0; + } +update: + if (refreshed) /* update tail */ + E1000_WRITE_REG(&adapter->hw, + E1000_RDT(rxr->me), rxr->next_to_refresh); + return; +} + + +/********************************************************************* + * + * Allocate memory for rx_buffer structures. Since we use one + * rx_buffer per received packet, the maximum number of rx_buffer's + * that we'll need is equal to the number of receive descriptors + * that we've allocated. + * + **********************************************************************/ +static int +igb_allocate_receive_buffers(struct rx_ring *rxr) +{ + struct adapter *adapter = rxr->adapter; + device_t dev = adapter->dev; + struct igb_rx_buf *rxbuf; + int i, bsize, error; + + bsize = sizeof(struct igb_rx_buf) * adapter->num_rx_desc; + if (!(rxr->rx_buffers = + (struct igb_rx_buf *) malloc(bsize, + M_DEVBUF, M_NOWAIT | M_ZERO))) { + device_printf(dev, "Unable to allocate rx_buffer memory\n"); + error = ENOMEM; + goto fail; + } + + if ((error = bus_dma_tag_create(bus_get_dma_tag(dev), + 1, 0, /* alignment, bounds */ + BUS_SPACE_MAXADDR, /* lowaddr */ + BUS_SPACE_MAXADDR, /* highaddr */ + NULL, NULL, /* filter, filterarg */ + MSIZE, /* maxsize */ + 1, /* nsegments */ + MSIZE, /* maxsegsize */ + 0, /* flags */ + NULL, /* lockfunc */ + NULL, /* lockfuncarg */ + &rxr->htag))) { + device_printf(dev, "Unable to create RX DMA tag\n"); + goto fail; + } + + if ((error = bus_dma_tag_create(bus_get_dma_tag(dev), + 1, 0, /* alignment, bounds */ + BUS_SPACE_MAXADDR, /* lowaddr */ + BUS_SPACE_MAXADDR, /* highaddr */ + NULL, NULL, /* filter, filterarg */ + MJUM9BYTES, /* maxsize */ + 1, /* nsegments */ + MJUM9BYTES, /* maxsegsize */ + 0, /* flags */ + NULL, /* lockfunc */ + NULL, /* lockfuncarg */ + &rxr->ptag))) { + device_printf(dev, "Unable to create RX payload DMA tag\n"); + goto fail; + } + + for (i = 0; i < adapter->num_rx_desc; i++) { + rxbuf = &rxr->rx_buffers[i]; + error = bus_dmamap_create(rxr->htag, 0, &rxbuf->hmap); + if (error) { + device_printf(dev, + "Unable to create RX head DMA maps\n"); + goto fail; + } + error = bus_dmamap_create(rxr->ptag, 0, &rxbuf->pmap); + if (error) { + device_printf(dev, + "Unable to create RX packet DMA maps\n"); + goto fail; + } + } + + return (0); + +fail: + /* Frees all, but can handle partial completion */ + igb_free_receive_structures(adapter); + return (error); +} + + +static void +igb_free_receive_ring(struct rx_ring *rxr) +{ + struct adapter *adapter = rxr->adapter; + struct igb_rx_buf *rxbuf; + + + for (int i = 0; i < adapter->num_rx_desc; i++) { + rxbuf = &rxr->rx_buffers[i]; + if (rxbuf->m_head != NULL) { + bus_dmamap_sync(rxr->htag, rxbuf->hmap, + BUS_DMASYNC_POSTREAD); + bus_dmamap_unload(rxr->htag, rxbuf->hmap); + rxbuf->m_head->m_flags |= M_PKTHDR; + m_freem(rxbuf->m_head); + } + if (rxbuf->m_pack != NULL) { + bus_dmamap_sync(rxr->ptag, rxbuf->pmap, + BUS_DMASYNC_POSTREAD); + bus_dmamap_unload(rxr->ptag, rxbuf->pmap); + rxbuf->m_pack->m_flags |= M_PKTHDR; + m_freem(rxbuf->m_pack); + } + rxbuf->m_head = NULL; + rxbuf->m_pack = NULL; + } +} + + +/********************************************************************* + * + * Initialize a receive ring and its buffers. + * + **********************************************************************/ +static int +igb_setup_receive_ring(struct rx_ring *rxr) +{ + struct adapter *adapter; + struct ifnet *ifp; + device_t dev; + struct igb_rx_buf *rxbuf; + bus_dma_segment_t pseg[1], hseg[1]; + struct lro_ctrl *lro = &rxr->lro; + int rsize, nsegs, error = 0; +#ifdef DEV_NETMAP + struct netmap_adapter *na = NA(rxr->adapter->ifp); + struct netmap_slot *slot; +#endif /* DEV_NETMAP */ + + adapter = rxr->adapter; + dev = adapter->dev; + ifp = adapter->ifp; + + /* Clear the ring contents */ + IGB_RX_LOCK(rxr); +#ifdef DEV_NETMAP + slot = netmap_reset(na, NR_RX, rxr->me, 0); +#endif /* DEV_NETMAP */ + rsize = roundup2(adapter->num_rx_desc * + sizeof(union e1000_adv_rx_desc), IGB_DBA_ALIGN); + bzero((void *)rxr->rx_base, rsize); + + /* + ** Free current RX buffer structures and their mbufs + */ + igb_free_receive_ring(rxr); + + /* Configure for header split? */ + if (igb_header_split) + rxr->hdr_split = TRUE; + + /* Now replenish the ring mbufs */ + for (int j = 0; j < adapter->num_rx_desc; ++j) { + struct mbuf *mh, *mp; + + rxbuf = &rxr->rx_buffers[j]; +#ifdef DEV_NETMAP + if (slot) { + /* slot sj is mapped to the i-th NIC-ring entry */ + int sj = netmap_idx_n2k(&na->rx_rings[rxr->me], j); + uint64_t paddr; + void *addr; + + addr = PNMB(slot + sj, &paddr); + netmap_load_map(rxr->ptag, rxbuf->pmap, addr); + /* Update descriptor */ + rxr->rx_base[j].read.pkt_addr = htole64(paddr); + continue; + } +#endif /* DEV_NETMAP */ + if (rxr->hdr_split == FALSE) + goto skip_head; + + /* First the header */ + rxbuf->m_head = m_gethdr(M_NOWAIT, MT_DATA); + if (rxbuf->m_head == NULL) { + error = ENOBUFS; + goto fail; + } + m_adj(rxbuf->m_head, ETHER_ALIGN); + mh = rxbuf->m_head; + mh->m_len = mh->m_pkthdr.len = MHLEN; + mh->m_flags |= M_PKTHDR; + /* Get the memory mapping */ + error = bus_dmamap_load_mbuf_sg(rxr->htag, + rxbuf->hmap, rxbuf->m_head, hseg, + &nsegs, BUS_DMA_NOWAIT); + if (error != 0) /* Nothing elegant to do here */ + goto fail; + bus_dmamap_sync(rxr->htag, + rxbuf->hmap, BUS_DMASYNC_PREREAD); + /* Update descriptor */ + rxr->rx_base[j].read.hdr_addr = htole64(hseg[0].ds_addr); + +skip_head: + /* Now the payload cluster */ + rxbuf->m_pack = m_getjcl(M_NOWAIT, MT_DATA, + M_PKTHDR, adapter->rx_mbuf_sz); + if (rxbuf->m_pack == NULL) { + error = ENOBUFS; + goto fail; + } + mp = rxbuf->m_pack; + mp->m_pkthdr.len = mp->m_len = adapter->rx_mbuf_sz; + /* Get the memory mapping */ + error = bus_dmamap_load_mbuf_sg(rxr->ptag, + rxbuf->pmap, mp, pseg, + &nsegs, BUS_DMA_NOWAIT); + if (error != 0) + goto fail; + bus_dmamap_sync(rxr->ptag, + rxbuf->pmap, BUS_DMASYNC_PREREAD); + /* Update descriptor */ + rxr->rx_base[j].read.pkt_addr = htole64(pseg[0].ds_addr); + } + + /* Setup our descriptor indices */ + rxr->next_to_check = 0; + rxr->next_to_refresh = adapter->num_rx_desc - 1; + rxr->lro_enabled = FALSE; + rxr->rx_split_packets = 0; + rxr->rx_bytes = 0; + + rxr->fmp = NULL; + rxr->lmp = NULL; + rxr->discard = FALSE; + + bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + + /* + ** Now set up the LRO interface, we + ** also only do head split when LRO + ** is enabled, since so often they + ** are undesireable in similar setups. + */ + if (ifp->if_capenable & IFCAP_LRO) { + error = tcp_lro_init(lro); + if (error) { + device_printf(dev, "LRO Initialization failed!\n"); + goto fail; + } + INIT_DEBUGOUT("RX LRO Initialized\n"); + rxr->lro_enabled = TRUE; + lro->ifp = adapter->ifp; + } + + IGB_RX_UNLOCK(rxr); + return (0); + +fail: + igb_free_receive_ring(rxr); + IGB_RX_UNLOCK(rxr); + return (error); +} + + +/********************************************************************* + * + * Initialize all receive rings. + * + **********************************************************************/ +static int +igb_setup_receive_structures(struct adapter *adapter) +{ + struct rx_ring *rxr = adapter->rx_rings; + int i; + + for (i = 0; i < adapter->num_queues; i++, rxr++) + if (igb_setup_receive_ring(rxr)) + goto fail; + + return (0); +fail: + /* + * Free RX buffers allocated so far, we will only handle + * the rings that completed, the failing case will have + * cleaned up for itself. 'i' is the endpoint. + */ + for (int j = 0; j < i; ++j) { + rxr = &adapter->rx_rings[j]; + IGB_RX_LOCK(rxr); + igb_free_receive_ring(rxr); + IGB_RX_UNLOCK(rxr); + } + + return (ENOBUFS); +} + +/********************************************************************* + * + * Enable receive unit. + * + **********************************************************************/ +static void +igb_initialize_receive_units(struct adapter *adapter) +{ + struct rx_ring *rxr = adapter->rx_rings; + struct ifnet *ifp = adapter->ifp; + struct e1000_hw *hw = &adapter->hw; + u32 rctl, rxcsum, psize, srrctl = 0; + + INIT_DEBUGOUT("igb_initialize_receive_unit: begin"); + + /* + * Make sure receives are disabled while setting + * up the descriptor ring + */ + rctl = E1000_READ_REG(hw, E1000_RCTL); + E1000_WRITE_REG(hw, E1000_RCTL, rctl & ~E1000_RCTL_EN); + + /* + ** Set up for header split + */ + if (igb_header_split) { + /* Use a standard mbuf for the header */ + srrctl |= IGB_HDR_BUF << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; + srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; + } else + srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF; + + /* + ** Set up for jumbo frames + */ + if (ifp->if_mtu > ETHERMTU) { + rctl |= E1000_RCTL_LPE; + if (adapter->rx_mbuf_sz == MJUMPAGESIZE) { + srrctl |= 4096 >> E1000_SRRCTL_BSIZEPKT_SHIFT; + rctl |= E1000_RCTL_SZ_4096 | E1000_RCTL_BSEX; + } else if (adapter->rx_mbuf_sz > MJUMPAGESIZE) { + srrctl |= 8192 >> E1000_SRRCTL_BSIZEPKT_SHIFT; + rctl |= E1000_RCTL_SZ_8192 | E1000_RCTL_BSEX; + } + /* Set maximum packet len */ + psize = adapter->max_frame_size; + /* are we on a vlan? */ + if (adapter->ifp->if_vlantrunk != NULL) + psize += VLAN_TAG_SIZE; + E1000_WRITE_REG(&adapter->hw, E1000_RLPML, psize); + } else { + rctl &= ~E1000_RCTL_LPE; + srrctl |= 2048 >> E1000_SRRCTL_BSIZEPKT_SHIFT; + rctl |= E1000_RCTL_SZ_2048; + } + + /* Setup the Base and Length of the Rx Descriptor Rings */ + for (int i = 0; i < adapter->num_queues; i++, rxr++) { + u64 bus_addr = rxr->rxdma.dma_paddr; + u32 rxdctl; + + E1000_WRITE_REG(hw, E1000_RDLEN(i), + adapter->num_rx_desc * sizeof(struct e1000_rx_desc)); + E1000_WRITE_REG(hw, E1000_RDBAH(i), + (uint32_t)(bus_addr >> 32)); + E1000_WRITE_REG(hw, E1000_RDBAL(i), + (uint32_t)bus_addr); + E1000_WRITE_REG(hw, E1000_SRRCTL(i), srrctl); + /* Enable this Queue */ + rxdctl = E1000_READ_REG(hw, E1000_RXDCTL(i)); + rxdctl |= E1000_RXDCTL_QUEUE_ENABLE; + rxdctl &= 0xFFF00000; + rxdctl |= IGB_RX_PTHRESH; + rxdctl |= IGB_RX_HTHRESH << 8; + rxdctl |= IGB_RX_WTHRESH << 16; + E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl); + } + + /* + ** Setup for RX MultiQueue + */ + rxcsum = E1000_READ_REG(hw, E1000_RXCSUM); + if (adapter->num_queues >1) { + u32 random[10], mrqc, shift = 0; + union igb_reta { + u32 dword; + u8 bytes[4]; + } reta; + + arc4rand(&random, sizeof(random), 0); + if (adapter->hw.mac.type == e1000_82575) + shift = 6; + /* Warning FM follows */ + for (int i = 0; i < 128; i++) { + reta.bytes[i & 3] = + (i % adapter->num_queues) << shift; + if ((i & 3) == 3) + E1000_WRITE_REG(hw, + E1000_RETA(i >> 2), reta.dword); + } + /* Now fill in hash table */ + mrqc = E1000_MRQC_ENABLE_RSS_4Q; + for (int i = 0; i < 10; i++) + E1000_WRITE_REG_ARRAY(hw, + E1000_RSSRK(0), i, random[i]); + + mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 | + E1000_MRQC_RSS_FIELD_IPV4_TCP); + mrqc |= (E1000_MRQC_RSS_FIELD_IPV6 | + E1000_MRQC_RSS_FIELD_IPV6_TCP); + mrqc |=( E1000_MRQC_RSS_FIELD_IPV4_UDP | + E1000_MRQC_RSS_FIELD_IPV6_UDP); + mrqc |=( E1000_MRQC_RSS_FIELD_IPV6_UDP_EX | + E1000_MRQC_RSS_FIELD_IPV6_TCP_EX); + + E1000_WRITE_REG(hw, E1000_MRQC, mrqc); + + /* + ** NOTE: Receive Full-Packet Checksum Offload + ** is mutually exclusive with Multiqueue. However + ** this is not the same as TCP/IP checksums which + ** still work. + */ + rxcsum |= E1000_RXCSUM_PCSD; +#if __FreeBSD_version >= 800000 + /* For SCTP Offload */ + if ((hw->mac.type == e1000_82576) + && (ifp->if_capenable & IFCAP_RXCSUM)) + rxcsum |= E1000_RXCSUM_CRCOFL; +#endif + } else { + /* Non RSS setup */ + if (ifp->if_capenable & IFCAP_RXCSUM) { + rxcsum |= E1000_RXCSUM_IPPCSE; +#if __FreeBSD_version >= 800000 + if (adapter->hw.mac.type == e1000_82576) + rxcsum |= E1000_RXCSUM_CRCOFL; +#endif + } else + rxcsum &= ~E1000_RXCSUM_TUOFL; + } + E1000_WRITE_REG(hw, E1000_RXCSUM, rxcsum); + + /* Setup the Receive Control Register */ + rctl &= ~(3 << E1000_RCTL_MO_SHIFT); + rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_LBM_NO | + E1000_RCTL_RDMTS_HALF | + (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT); + /* Strip CRC bytes. */ + rctl |= E1000_RCTL_SECRC; + /* Make sure VLAN Filters are off */ + rctl &= ~E1000_RCTL_VFE; + /* Don't store bad packets */ + rctl &= ~E1000_RCTL_SBP; + + /* Enable Receives */ + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + + /* + * Setup the HW Rx Head and Tail Descriptor Pointers + * - needs to be after enable + */ + for (int i = 0; i < adapter->num_queues; i++) { + rxr = &adapter->rx_rings[i]; + E1000_WRITE_REG(hw, E1000_RDH(i), rxr->next_to_check); +#ifdef DEV_NETMAP + /* + * an init() while a netmap client is active must + * preserve the rx buffers passed to userspace. + * In this driver it means we adjust RDT to + * something different from next_to_refresh + * (which is not used in netmap mode). + */ + if (ifp->if_capenable & IFCAP_NETMAP) { + struct netmap_adapter *na = NA(adapter->ifp); + struct netmap_kring *kring = &na->rx_rings[i]; + int t = rxr->next_to_refresh - nm_kr_rxspace(kring); + + if (t >= adapter->num_rx_desc) + t -= adapter->num_rx_desc; + else if (t < 0) + t += adapter->num_rx_desc; + E1000_WRITE_REG(hw, E1000_RDT(i), t); + } else +#endif /* DEV_NETMAP */ + E1000_WRITE_REG(hw, E1000_RDT(i), rxr->next_to_refresh); + } + return; +} + +/********************************************************************* + * + * Free receive rings. + * + **********************************************************************/ +static void +igb_free_receive_structures(struct adapter *adapter) +{ + struct rx_ring *rxr = adapter->rx_rings; + + for (int i = 0; i < adapter->num_queues; i++, rxr++) { + struct lro_ctrl *lro = &rxr->lro; + igb_free_receive_buffers(rxr); + tcp_lro_free(lro); + igb_dma_free(adapter, &rxr->rxdma); + } + + free(adapter->rx_rings, M_DEVBUF); +} + +/********************************************************************* + * + * Free receive ring data structures. + * + **********************************************************************/ +static void +igb_free_receive_buffers(struct rx_ring *rxr) +{ + struct adapter *adapter = rxr->adapter; + struct igb_rx_buf *rxbuf; + int i; + + INIT_DEBUGOUT("free_receive_structures: begin"); + + /* Cleanup any existing buffers */ + if (rxr->rx_buffers != NULL) { + for (i = 0; i < adapter->num_rx_desc; i++) { + rxbuf = &rxr->rx_buffers[i]; + if (rxbuf->m_head != NULL) { + bus_dmamap_sync(rxr->htag, rxbuf->hmap, + BUS_DMASYNC_POSTREAD); + bus_dmamap_unload(rxr->htag, rxbuf->hmap); + rxbuf->m_head->m_flags |= M_PKTHDR; + m_freem(rxbuf->m_head); + } + if (rxbuf->m_pack != NULL) { + bus_dmamap_sync(rxr->ptag, rxbuf->pmap, + BUS_DMASYNC_POSTREAD); + bus_dmamap_unload(rxr->ptag, rxbuf->pmap); + rxbuf->m_pack->m_flags |= M_PKTHDR; + m_freem(rxbuf->m_pack); + } + rxbuf->m_head = NULL; + rxbuf->m_pack = NULL; + if (rxbuf->hmap != NULL) { + bus_dmamap_destroy(rxr->htag, rxbuf->hmap); + rxbuf->hmap = NULL; + } + if (rxbuf->pmap != NULL) { + bus_dmamap_destroy(rxr->ptag, rxbuf->pmap); + rxbuf->pmap = NULL; + } + } + if (rxr->rx_buffers != NULL) { + free(rxr->rx_buffers, M_DEVBUF); + rxr->rx_buffers = NULL; + } + } + + if (rxr->htag != NULL) { + bus_dma_tag_destroy(rxr->htag); + rxr->htag = NULL; + } + if (rxr->ptag != NULL) { + bus_dma_tag_destroy(rxr->ptag); + rxr->ptag = NULL; + } +} + +static __inline void +igb_rx_discard(struct rx_ring *rxr, int i) +{ + struct igb_rx_buf *rbuf; + + rbuf = &rxr->rx_buffers[i]; + + /* Partially received? Free the chain */ + if (rxr->fmp != NULL) { + rxr->fmp->m_flags |= M_PKTHDR; + m_freem(rxr->fmp); + rxr->fmp = NULL; + rxr->lmp = NULL; + } + + /* + ** With advanced descriptors the writeback + ** clobbers the buffer addrs, so its easier + ** to just free the existing mbufs and take + ** the normal refresh path to get new buffers + ** and mapping. + */ + if (rbuf->m_head) { + m_free(rbuf->m_head); + rbuf->m_head = NULL; + bus_dmamap_unload(rxr->htag, rbuf->hmap); + } + + if (rbuf->m_pack) { + m_free(rbuf->m_pack); + rbuf->m_pack = NULL; + bus_dmamap_unload(rxr->ptag, rbuf->pmap); + } + + return; +} + +static __inline void +igb_rx_input(struct rx_ring *rxr, struct ifnet *ifp, struct mbuf *m, u32 ptype) +{ + + /* + * ATM LRO is only for IPv4/TCP packets and TCP checksum of the packet + * should be computed by hardware. Also it should not have VLAN tag in + * ethernet header. + */ + if (rxr->lro_enabled && + (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0 && + (ptype & E1000_RXDADV_PKTTYPE_ETQF) == 0 && + (ptype & (E1000_RXDADV_PKTTYPE_IPV4 | E1000_RXDADV_PKTTYPE_TCP)) == + (E1000_RXDADV_PKTTYPE_IPV4 | E1000_RXDADV_PKTTYPE_TCP) && + (m->m_pkthdr.csum_flags & (CSUM_DATA_VALID | CSUM_PSEUDO_HDR)) == + (CSUM_DATA_VALID | CSUM_PSEUDO_HDR)) { + /* + * Send to the stack if: + ** - LRO not enabled, or + ** - no LRO resources, or + ** - lro enqueue fails + */ + if (rxr->lro.lro_cnt != 0) + if (tcp_lro_rx(&rxr->lro, m, 0) == 0) + return; + } + IGB_RX_UNLOCK(rxr); + (*ifp->if_input)(ifp, m); + IGB_RX_LOCK(rxr); +} + +/********************************************************************* + * + * This routine executes in interrupt context. It replenishes + * the mbufs in the descriptor and sends data which has been + * dma'ed into host memory to upper layer. + * + * We loop at most count times if count is > 0, or until done if + * count < 0. + * + * Return TRUE if more to clean, FALSE otherwise + *********************************************************************/ +static bool +igb_rxeof(struct igb_queue *que, int count, int *done) +{ + struct adapter *adapter = que->adapter; + struct rx_ring *rxr = que->rxr; + struct ifnet *ifp = adapter->ifp; + struct lro_ctrl *lro = &rxr->lro; + struct lro_entry *queued; + int i, processed = 0, rxdone = 0; + u32 ptype, staterr = 0; + union e1000_adv_rx_desc *cur; + + IGB_RX_LOCK(rxr); + /* Sync the ring. */ + bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map, + BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); + +#ifdef DEV_NETMAP + if (netmap_rx_irq(ifp, rxr->me, &processed)) { + IGB_RX_UNLOCK(rxr); + return (FALSE); + } +#endif /* DEV_NETMAP */ + + /* Main clean loop */ + for (i = rxr->next_to_check; count != 0;) { + struct mbuf *sendmp, *mh, *mp; + struct igb_rx_buf *rxbuf; + u16 hlen, plen, hdr, vtag; + bool eop = FALSE; + + cur = &rxr->rx_base[i]; + staterr = le32toh(cur->wb.upper.status_error); + if ((staterr & E1000_RXD_STAT_DD) == 0) + break; + if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) + break; + count--; + sendmp = mh = mp = NULL; + cur->wb.upper.status_error = 0; + rxbuf = &rxr->rx_buffers[i]; + plen = le16toh(cur->wb.upper.length); + ptype = le32toh(cur->wb.lower.lo_dword.data) & IGB_PKTTYPE_MASK; + if (((adapter->hw.mac.type == e1000_i350) || + (adapter->hw.mac.type == e1000_i354)) && + (staterr & E1000_RXDEXT_STATERR_LB)) + vtag = be16toh(cur->wb.upper.vlan); + else + vtag = le16toh(cur->wb.upper.vlan); + hdr = le16toh(cur->wb.lower.lo_dword.hs_rss.hdr_info); + eop = ((staterr & E1000_RXD_STAT_EOP) == E1000_RXD_STAT_EOP); + + /* Make sure all segments of a bad packet are discarded */ + if (((staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) != 0) || + (rxr->discard)) { + adapter->dropped_pkts++; + ++rxr->rx_discarded; + if (!eop) /* Catch subsequent segs */ + rxr->discard = TRUE; + else + rxr->discard = FALSE; + igb_rx_discard(rxr, i); + goto next_desc; + } + + /* + ** The way the hardware is configured to + ** split, it will ONLY use the header buffer + ** when header split is enabled, otherwise we + ** get normal behavior, ie, both header and + ** payload are DMA'd into the payload buffer. + ** + ** The fmp test is to catch the case where a + ** packet spans multiple descriptors, in that + ** case only the first header is valid. + */ + if (rxr->hdr_split && rxr->fmp == NULL) { + bus_dmamap_unload(rxr->htag, rxbuf->hmap); + hlen = (hdr & E1000_RXDADV_HDRBUFLEN_MASK) >> + E1000_RXDADV_HDRBUFLEN_SHIFT; + if (hlen > IGB_HDR_BUF) + hlen = IGB_HDR_BUF; + mh = rxr->rx_buffers[i].m_head; + mh->m_len = hlen; + /* clear buf pointer for refresh */ + rxbuf->m_head = NULL; + /* + ** Get the payload length, this + ** could be zero if its a small + ** packet. + */ + if (plen > 0) { + mp = rxr->rx_buffers[i].m_pack; + mp->m_len = plen; + mh->m_next = mp; + /* clear buf pointer */ + rxbuf->m_pack = NULL; + rxr->rx_split_packets++; + } + } else { + /* + ** Either no header split, or a + ** secondary piece of a fragmented + ** split packet. + */ + mh = rxr->rx_buffers[i].m_pack; + mh->m_len = plen; + /* clear buf info for refresh */ + rxbuf->m_pack = NULL; + } + bus_dmamap_unload(rxr->ptag, rxbuf->pmap); + + ++processed; /* So we know when to refresh */ + + /* Initial frame - setup */ + if (rxr->fmp == NULL) { + mh->m_pkthdr.len = mh->m_len; + /* Save the head of the chain */ + rxr->fmp = mh; + rxr->lmp = mh; + if (mp != NULL) { + /* Add payload if split */ + mh->m_pkthdr.len += mp->m_len; + rxr->lmp = mh->m_next; + } + } else { + /* Chain mbuf's together */ + rxr->lmp->m_next = mh; + rxr->lmp = rxr->lmp->m_next; + rxr->fmp->m_pkthdr.len += mh->m_len; + } + + if (eop) { + rxr->fmp->m_pkthdr.rcvif = ifp; + ifp->if_ipackets++; + rxr->rx_packets++; + /* capture data for AIM */ + rxr->packets++; + rxr->bytes += rxr->fmp->m_pkthdr.len; + rxr->rx_bytes += rxr->fmp->m_pkthdr.len; + + if ((ifp->if_capenable & IFCAP_RXCSUM) != 0) + igb_rx_checksum(staterr, rxr->fmp, ptype); + + if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0 && + (staterr & E1000_RXD_STAT_VP) != 0) { + rxr->fmp->m_pkthdr.ether_vtag = vtag; + rxr->fmp->m_flags |= M_VLANTAG; + } +#ifndef IGB_LEGACY_TX + rxr->fmp->m_pkthdr.flowid = que->msix; + rxr->fmp->m_flags |= M_FLOWID; +#endif + sendmp = rxr->fmp; + /* Make sure to set M_PKTHDR. */ + sendmp->m_flags |= M_PKTHDR; + rxr->fmp = NULL; + rxr->lmp = NULL; + } + +next_desc: + bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + + /* Advance our pointers to the next descriptor. */ + if (++i == adapter->num_rx_desc) + i = 0; + /* + ** Send to the stack or LRO + */ + if (sendmp != NULL) { + rxr->next_to_check = i; + igb_rx_input(rxr, ifp, sendmp, ptype); + i = rxr->next_to_check; + rxdone++; + } + + /* Every 8 descriptors we go to refresh mbufs */ + if (processed == 8) { + igb_refresh_mbufs(rxr, i); + processed = 0; + } + } + + /* Catch any remainders */ + if (igb_rx_unrefreshed(rxr)) + igb_refresh_mbufs(rxr, i); + + rxr->next_to_check = i; + + /* + * Flush any outstanding LRO work + */ + while ((queued = SLIST_FIRST(&lro->lro_active)) != NULL) { + SLIST_REMOVE_HEAD(&lro->lro_active, next); + tcp_lro_flush(lro, queued); + } + + if (done != NULL) + *done += rxdone; + + IGB_RX_UNLOCK(rxr); + return ((staterr & E1000_RXD_STAT_DD) ? TRUE : FALSE); +} + +/********************************************************************* + * + * Verify that the hardware indicated that the checksum is valid. + * Inform the stack about the status of checksum so that stack + * doesn't spend time verifying the checksum. + * + *********************************************************************/ +static void +igb_rx_checksum(u32 staterr, struct mbuf *mp, u32 ptype) +{ + u16 status = (u16)staterr; + u8 errors = (u8) (staterr >> 24); + int sctp; + + /* Ignore Checksum bit is set */ + if (status & E1000_RXD_STAT_IXSM) { + mp->m_pkthdr.csum_flags = 0; + return; + } + + if ((ptype & E1000_RXDADV_PKTTYPE_ETQF) == 0 && + (ptype & E1000_RXDADV_PKTTYPE_SCTP) != 0) + sctp = 1; + else + sctp = 0; + if (status & E1000_RXD_STAT_IPCS) { + /* Did it pass? */ + if (!(errors & E1000_RXD_ERR_IPE)) { + /* IP Checksum Good */ + mp->m_pkthdr.csum_flags = CSUM_IP_CHECKED; + mp->m_pkthdr.csum_flags |= CSUM_IP_VALID; + } else + mp->m_pkthdr.csum_flags = 0; + } + + if (status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)) { + u64 type = (CSUM_DATA_VALID | CSUM_PSEUDO_HDR); +#if __FreeBSD_version >= 800000 + if (sctp) /* reassign */ + type = CSUM_SCTP_VALID; +#endif + /* Did it pass? */ + if (!(errors & E1000_RXD_ERR_TCPE)) { + mp->m_pkthdr.csum_flags |= type; + if (sctp == 0) + mp->m_pkthdr.csum_data = htons(0xffff); + } + } + return; +} + +/* + * This routine is run via an vlan + * config EVENT + */ +static void +igb_register_vlan(void *arg, struct ifnet *ifp, u16 vtag) +{ + struct adapter *adapter = ifp->if_softc; + u32 index, bit; + + if (ifp->if_softc != arg) /* Not our event */ + return; + + if ((vtag == 0) || (vtag > 4095)) /* Invalid */ + return; + + IGB_CORE_LOCK(adapter); + index = (vtag >> 5) & 0x7F; + bit = vtag & 0x1F; + adapter->shadow_vfta[index] |= (1 << bit); + ++adapter->num_vlans; + /* Change hw filter setting */ + if (ifp->if_capenable & IFCAP_VLAN_HWFILTER) + igb_setup_vlan_hw_support(adapter); + IGB_CORE_UNLOCK(adapter); +} + +/* + * This routine is run via an vlan + * unconfig EVENT + */ +static void +igb_unregister_vlan(void *arg, struct ifnet *ifp, u16 vtag) +{ + struct adapter *adapter = ifp->if_softc; + u32 index, bit; + + if (ifp->if_softc != arg) + return; + + if ((vtag == 0) || (vtag > 4095)) /* Invalid */ + return; + + IGB_CORE_LOCK(adapter); + index = (vtag >> 5) & 0x7F; + bit = vtag & 0x1F; + adapter->shadow_vfta[index] &= ~(1 << bit); + --adapter->num_vlans; + /* Change hw filter setting */ + if (ifp->if_capenable & IFCAP_VLAN_HWFILTER) + igb_setup_vlan_hw_support(adapter); + IGB_CORE_UNLOCK(adapter); +} + +static void +igb_setup_vlan_hw_support(struct adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct ifnet *ifp = adapter->ifp; + u32 reg; + + if (adapter->vf_ifp) { + e1000_rlpml_set_vf(hw, + adapter->max_frame_size + VLAN_TAG_SIZE); + return; + } + + reg = E1000_READ_REG(hw, E1000_CTRL); + reg |= E1000_CTRL_VME; + E1000_WRITE_REG(hw, E1000_CTRL, reg); + + /* Enable the Filter Table */ + if (ifp->if_capenable & IFCAP_VLAN_HWFILTER) { + reg = E1000_READ_REG(hw, E1000_RCTL); + reg &= ~E1000_RCTL_CFIEN; + reg |= E1000_RCTL_VFE; + E1000_WRITE_REG(hw, E1000_RCTL, reg); + } + + /* Update the frame size */ + E1000_WRITE_REG(&adapter->hw, E1000_RLPML, + adapter->max_frame_size + VLAN_TAG_SIZE); + + /* Don't bother with table if no vlans */ + if ((adapter->num_vlans == 0) || + ((ifp->if_capenable & IFCAP_VLAN_HWFILTER) == 0)) + return; + /* + ** A soft reset zero's out the VFTA, so + ** we need to repopulate it now. + */ + for (int i = 0; i < IGB_VFTA_SIZE; i++) + if (adapter->shadow_vfta[i] != 0) { + if (adapter->vf_ifp) + e1000_vfta_set_vf(hw, + adapter->shadow_vfta[i], TRUE); + else + e1000_write_vfta(hw, + i, adapter->shadow_vfta[i]); + } +} + +static void +igb_enable_intr(struct adapter *adapter) +{ + /* With RSS set up what to auto clear */ + if (adapter->msix_mem) { + u32 mask = (adapter->que_mask | adapter->link_mask); + E1000_WRITE_REG(&adapter->hw, E1000_EIAC, mask); + E1000_WRITE_REG(&adapter->hw, E1000_EIAM, mask); + E1000_WRITE_REG(&adapter->hw, E1000_EIMS, mask); + E1000_WRITE_REG(&adapter->hw, E1000_IMS, + E1000_IMS_LSC); + } else { + E1000_WRITE_REG(&adapter->hw, E1000_IMS, + IMS_ENABLE_MASK); + } + E1000_WRITE_FLUSH(&adapter->hw); + + return; +} + +static void +igb_disable_intr(struct adapter *adapter) +{ + if (adapter->msix_mem) { + E1000_WRITE_REG(&adapter->hw, E1000_EIMC, ~0); + E1000_WRITE_REG(&adapter->hw, E1000_EIAC, 0); + } + E1000_WRITE_REG(&adapter->hw, E1000_IMC, ~0); + E1000_WRITE_FLUSH(&adapter->hw); + return; +} + +/* + * Bit of a misnomer, what this really means is + * to enable OS management of the system... aka + * to disable special hardware management features + */ +static void +igb_init_manageability(struct adapter *adapter) +{ + if (adapter->has_manage) { + int manc2h = E1000_READ_REG(&adapter->hw, E1000_MANC2H); + int manc = E1000_READ_REG(&adapter->hw, E1000_MANC); + + /* disable hardware interception of ARP */ + manc &= ~(E1000_MANC_ARP_EN); + + /* enable receiving management packets to the host */ + manc |= E1000_MANC_EN_MNG2HOST; + manc2h |= 1 << 5; /* Mng Port 623 */ + manc2h |= 1 << 6; /* Mng Port 664 */ + E1000_WRITE_REG(&adapter->hw, E1000_MANC2H, manc2h); + E1000_WRITE_REG(&adapter->hw, E1000_MANC, manc); + } +} + +/* + * Give control back to hardware management + * controller if there is one. + */ +static void +igb_release_manageability(struct adapter *adapter) +{ + if (adapter->has_manage) { + int manc = E1000_READ_REG(&adapter->hw, E1000_MANC); + + /* re-enable hardware interception of ARP */ + manc |= E1000_MANC_ARP_EN; + manc &= ~E1000_MANC_EN_MNG2HOST; + + E1000_WRITE_REG(&adapter->hw, E1000_MANC, manc); + } +} + +/* + * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that + * the driver is loaded. + * + */ +static void +igb_get_hw_control(struct adapter *adapter) +{ + u32 ctrl_ext; + + if (adapter->vf_ifp) + return; + + /* Let firmware know the driver has taken over */ + ctrl_ext = E1000_READ_REG(&adapter->hw, E1000_CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, E1000_CTRL_EXT, + ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); +} + +/* + * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that the + * driver is no longer loaded. + * + */ +static void +igb_release_hw_control(struct adapter *adapter) +{ + u32 ctrl_ext; + + if (adapter->vf_ifp) + return; + + /* Let firmware taken over control of h/w */ + ctrl_ext = E1000_READ_REG(&adapter->hw, E1000_CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, E1000_CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); +} + +static int +igb_is_valid_ether_addr(uint8_t *addr) +{ + char zero_addr[6] = { 0, 0, 0, 0, 0, 0 }; + + if ((addr[0] & 1) || (!bcmp(addr, zero_addr, ETHER_ADDR_LEN))) { + return (FALSE); + } + + return (TRUE); +} + + +/* + * Enable PCI Wake On Lan capability + */ +static void +igb_enable_wakeup(device_t dev) +{ + u16 cap, status; + u8 id; + + /* First find the capabilities pointer*/ + cap = pci_read_config(dev, PCIR_CAP_PTR, 2); + /* Read the PM Capabilities */ + id = pci_read_config(dev, cap, 1); + if (id != PCIY_PMG) /* Something wrong */ + return; + /* OK, we have the power capabilities, so + now get the status register */ + cap += PCIR_POWER_STATUS; + status = pci_read_config(dev, cap, 2); + status |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE; + pci_write_config(dev, cap, status, 2); + return; +} + +static void +igb_led_func(void *arg, int onoff) +{ + struct adapter *adapter = arg; + + IGB_CORE_LOCK(adapter); + if (onoff) { + e1000_setup_led(&adapter->hw); + e1000_led_on(&adapter->hw); + } else { + e1000_led_off(&adapter->hw); + e1000_cleanup_led(&adapter->hw); + } + IGB_CORE_UNLOCK(adapter); +} + +/********************************************************************** + * + * Update the board statistics counters. + * + **********************************************************************/ +static void +igb_update_stats_counters(struct adapter *adapter) +{ + struct ifnet *ifp; + struct e1000_hw *hw = &adapter->hw; + struct e1000_hw_stats *stats; + + /* + ** The virtual function adapter has only a + ** small controlled set of stats, do only + ** those and return. + */ + if (adapter->vf_ifp) { + igb_update_vf_stats_counters(adapter); + return; + } + + stats = (struct e1000_hw_stats *)adapter->stats; + + if(adapter->hw.phy.media_type == e1000_media_type_copper || + (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) { + stats->symerrs += + E1000_READ_REG(hw,E1000_SYMERRS); + stats->sec += E1000_READ_REG(hw, E1000_SEC); + } + + stats->crcerrs += E1000_READ_REG(hw, E1000_CRCERRS); + stats->mpc += E1000_READ_REG(hw, E1000_MPC); + stats->scc += E1000_READ_REG(hw, E1000_SCC); + stats->ecol += E1000_READ_REG(hw, E1000_ECOL); + + stats->mcc += E1000_READ_REG(hw, E1000_MCC); + stats->latecol += E1000_READ_REG(hw, E1000_LATECOL); + stats->colc += E1000_READ_REG(hw, E1000_COLC); + stats->dc += E1000_READ_REG(hw, E1000_DC); + stats->rlec += E1000_READ_REG(hw, E1000_RLEC); + stats->xonrxc += E1000_READ_REG(hw, E1000_XONRXC); + stats->xontxc += E1000_READ_REG(hw, E1000_XONTXC); + /* + ** For watchdog management we need to know if we have been + ** paused during the last interval, so capture that here. + */ + adapter->pause_frames = E1000_READ_REG(&adapter->hw, E1000_XOFFRXC); + stats->xoffrxc += adapter->pause_frames; + stats->xofftxc += E1000_READ_REG(hw, E1000_XOFFTXC); + stats->fcruc += E1000_READ_REG(hw, E1000_FCRUC); + stats->prc64 += E1000_READ_REG(hw, E1000_PRC64); + stats->prc127 += E1000_READ_REG(hw, E1000_PRC127); + stats->prc255 += E1000_READ_REG(hw, E1000_PRC255); + stats->prc511 += E1000_READ_REG(hw, E1000_PRC511); + stats->prc1023 += E1000_READ_REG(hw, E1000_PRC1023); + stats->prc1522 += E1000_READ_REG(hw, E1000_PRC1522); + stats->gprc += E1000_READ_REG(hw, E1000_GPRC); + stats->bprc += E1000_READ_REG(hw, E1000_BPRC); + stats->mprc += E1000_READ_REG(hw, E1000_MPRC); + stats->gptc += E1000_READ_REG(hw, E1000_GPTC); + + /* For the 64-bit byte counters the low dword must be read first. */ + /* Both registers clear on the read of the high dword */ + + stats->gorc += E1000_READ_REG(hw, E1000_GORCL) + + ((u64)E1000_READ_REG(hw, E1000_GORCH) << 32); + stats->gotc += E1000_READ_REG(hw, E1000_GOTCL) + + ((u64)E1000_READ_REG(hw, E1000_GOTCH) << 32); + + stats->rnbc += E1000_READ_REG(hw, E1000_RNBC); + stats->ruc += E1000_READ_REG(hw, E1000_RUC); + stats->rfc += E1000_READ_REG(hw, E1000_RFC); + stats->roc += E1000_READ_REG(hw, E1000_ROC); + stats->rjc += E1000_READ_REG(hw, E1000_RJC); + + stats->tor += E1000_READ_REG(hw, E1000_TORH); + stats->tot += E1000_READ_REG(hw, E1000_TOTH); + + stats->tpr += E1000_READ_REG(hw, E1000_TPR); + stats->tpt += E1000_READ_REG(hw, E1000_TPT); + stats->ptc64 += E1000_READ_REG(hw, E1000_PTC64); + stats->ptc127 += E1000_READ_REG(hw, E1000_PTC127); + stats->ptc255 += E1000_READ_REG(hw, E1000_PTC255); + stats->ptc511 += E1000_READ_REG(hw, E1000_PTC511); + stats->ptc1023 += E1000_READ_REG(hw, E1000_PTC1023); + stats->ptc1522 += E1000_READ_REG(hw, E1000_PTC1522); + stats->mptc += E1000_READ_REG(hw, E1000_MPTC); + stats->bptc += E1000_READ_REG(hw, E1000_BPTC); + + /* Interrupt Counts */ + + stats->iac += E1000_READ_REG(hw, E1000_IAC); + stats->icrxptc += E1000_READ_REG(hw, E1000_ICRXPTC); + stats->icrxatc += E1000_READ_REG(hw, E1000_ICRXATC); + stats->ictxptc += E1000_READ_REG(hw, E1000_ICTXPTC); + stats->ictxatc += E1000_READ_REG(hw, E1000_ICTXATC); + stats->ictxqec += E1000_READ_REG(hw, E1000_ICTXQEC); + stats->ictxqmtc += E1000_READ_REG(hw, E1000_ICTXQMTC); + stats->icrxdmtc += E1000_READ_REG(hw, E1000_ICRXDMTC); + stats->icrxoc += E1000_READ_REG(hw, E1000_ICRXOC); + + /* Host to Card Statistics */ + + stats->cbtmpc += E1000_READ_REG(hw, E1000_CBTMPC); + stats->htdpmc += E1000_READ_REG(hw, E1000_HTDPMC); + stats->cbrdpc += E1000_READ_REG(hw, E1000_CBRDPC); + stats->cbrmpc += E1000_READ_REG(hw, E1000_CBRMPC); + stats->rpthc += E1000_READ_REG(hw, E1000_RPTHC); + stats->hgptc += E1000_READ_REG(hw, E1000_HGPTC); + stats->htcbdpc += E1000_READ_REG(hw, E1000_HTCBDPC); + stats->hgorc += (E1000_READ_REG(hw, E1000_HGORCL) + + ((u64)E1000_READ_REG(hw, E1000_HGORCH) << 32)); + stats->hgotc += (E1000_READ_REG(hw, E1000_HGOTCL) + + ((u64)E1000_READ_REG(hw, E1000_HGOTCH) << 32)); + stats->lenerrs += E1000_READ_REG(hw, E1000_LENERRS); + stats->scvpc += E1000_READ_REG(hw, E1000_SCVPC); + stats->hrmpc += E1000_READ_REG(hw, E1000_HRMPC); + + stats->algnerrc += E1000_READ_REG(hw, E1000_ALGNERRC); + stats->rxerrc += E1000_READ_REG(hw, E1000_RXERRC); + stats->tncrs += E1000_READ_REG(hw, E1000_TNCRS); + stats->cexterr += E1000_READ_REG(hw, E1000_CEXTERR); + stats->tsctc += E1000_READ_REG(hw, E1000_TSCTC); + stats->tsctfc += E1000_READ_REG(hw, E1000_TSCTFC); + + ifp = adapter->ifp; + ifp->if_collisions = stats->colc; + + /* Rx Errors */ + ifp->if_ierrors = adapter->dropped_pkts + stats->rxerrc + + stats->crcerrs + stats->algnerrc + + stats->ruc + stats->roc + stats->mpc + stats->cexterr; + + /* Tx Errors */ + ifp->if_oerrors = stats->ecol + + stats->latecol + adapter->watchdog_events; + + /* Driver specific counters */ + adapter->device_control = E1000_READ_REG(hw, E1000_CTRL); + adapter->rx_control = E1000_READ_REG(hw, E1000_RCTL); + adapter->int_mask = E1000_READ_REG(hw, E1000_IMS); + adapter->eint_mask = E1000_READ_REG(hw, E1000_EIMS); + adapter->packet_buf_alloc_tx = + ((E1000_READ_REG(hw, E1000_PBA) & 0xffff0000) >> 16); + adapter->packet_buf_alloc_rx = + (E1000_READ_REG(hw, E1000_PBA) & 0xffff); +} + + +/********************************************************************** + * + * Initialize the VF board statistics counters. + * + **********************************************************************/ +static void +igb_vf_init_stats(struct adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_vf_stats *stats; + + stats = (struct e1000_vf_stats *)adapter->stats; + if (stats == NULL) + return; + stats->last_gprc = E1000_READ_REG(hw, E1000_VFGPRC); + stats->last_gorc = E1000_READ_REG(hw, E1000_VFGORC); + stats->last_gptc = E1000_READ_REG(hw, E1000_VFGPTC); + stats->last_gotc = E1000_READ_REG(hw, E1000_VFGOTC); + stats->last_mprc = E1000_READ_REG(hw, E1000_VFMPRC); +} + +/********************************************************************** + * + * Update the VF board statistics counters. + * + **********************************************************************/ +static void +igb_update_vf_stats_counters(struct adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_vf_stats *stats; + + if (adapter->link_speed == 0) + return; + + stats = (struct e1000_vf_stats *)adapter->stats; + + UPDATE_VF_REG(E1000_VFGPRC, + stats->last_gprc, stats->gprc); + UPDATE_VF_REG(E1000_VFGORC, + stats->last_gorc, stats->gorc); + UPDATE_VF_REG(E1000_VFGPTC, + stats->last_gptc, stats->gptc); + UPDATE_VF_REG(E1000_VFGOTC, + stats->last_gotc, stats->gotc); + UPDATE_VF_REG(E1000_VFMPRC, + stats->last_mprc, stats->mprc); +} + +/* Export a single 32-bit register via a read-only sysctl. */ +static int +igb_sysctl_reg_handler(SYSCTL_HANDLER_ARGS) +{ + struct adapter *adapter; + u_int val; + + adapter = oidp->oid_arg1; + val = E1000_READ_REG(&adapter->hw, oidp->oid_arg2); + return (sysctl_handle_int(oidp, &val, 0, req)); +} + +/* +** Tuneable interrupt rate handler +*/ +static int +igb_sysctl_interrupt_rate_handler(SYSCTL_HANDLER_ARGS) +{ + struct igb_queue *que = ((struct igb_queue *)oidp->oid_arg1); + int error; + u32 reg, usec, rate; + + reg = E1000_READ_REG(&que->adapter->hw, E1000_EITR(que->msix)); + usec = ((reg & 0x7FFC) >> 2); + if (usec > 0) + rate = 1000000 / usec; + else + rate = 0; + error = sysctl_handle_int(oidp, &rate, 0, req); + if (error || !req->newptr) + return error; + return 0; +} + +/* + * Add sysctl variables, one per statistic, to the system. + */ +static void +igb_add_hw_stats(struct adapter *adapter) +{ + device_t dev = adapter->dev; + + struct tx_ring *txr = adapter->tx_rings; + struct rx_ring *rxr = adapter->rx_rings; + + struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev); + struct sysctl_oid *tree = device_get_sysctl_tree(dev); + struct sysctl_oid_list *child = SYSCTL_CHILDREN(tree); + struct e1000_hw_stats *stats = adapter->stats; + + struct sysctl_oid *stat_node, *queue_node, *int_node, *host_node; + struct sysctl_oid_list *stat_list, *queue_list, *int_list, *host_list; + +#define QUEUE_NAME_LEN 32 + char namebuf[QUEUE_NAME_LEN]; + + /* Driver Statistics */ + SYSCTL_ADD_UINT(ctx, child, OID_AUTO, "link_irq", + CTLFLAG_RD, &adapter->link_irq, 0, + "Link MSIX IRQ Handled"); + SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "dropped", + CTLFLAG_RD, &adapter->dropped_pkts, + "Driver dropped packets"); + SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "tx_dma_fail", + CTLFLAG_RD, &adapter->no_tx_dma_setup, + "Driver tx dma failure in xmit"); + SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "rx_overruns", + CTLFLAG_RD, &adapter->rx_overruns, + "RX overruns"); + SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "watchdog_timeouts", + CTLFLAG_RD, &adapter->watchdog_events, + "Watchdog timeouts"); + + SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "device_control", + CTLFLAG_RD, &adapter->device_control, + "Device Control Register"); + SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "rx_control", + CTLFLAG_RD, &adapter->rx_control, + "Receiver Control Register"); + SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "interrupt_mask", + CTLFLAG_RD, &adapter->int_mask, + "Interrupt Mask"); + SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "extended_int_mask", + CTLFLAG_RD, &adapter->eint_mask, + "Extended Interrupt Mask"); + SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "tx_buf_alloc", + CTLFLAG_RD, &adapter->packet_buf_alloc_tx, + "Transmit Buffer Packet Allocation"); + SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "rx_buf_alloc", + CTLFLAG_RD, &adapter->packet_buf_alloc_rx, + "Receive Buffer Packet Allocation"); + SYSCTL_ADD_UINT(ctx, child, OID_AUTO, "fc_high_water", + CTLFLAG_RD, &adapter->hw.fc.high_water, 0, + "Flow Control High Watermark"); + SYSCTL_ADD_UINT(ctx, child, OID_AUTO, "fc_low_water", + CTLFLAG_RD, &adapter->hw.fc.low_water, 0, + "Flow Control Low Watermark"); + + for (int i = 0; i < adapter->num_queues; i++, rxr++, txr++) { + struct lro_ctrl *lro = &rxr->lro; + + snprintf(namebuf, QUEUE_NAME_LEN, "queue%d", i); + queue_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, namebuf, + CTLFLAG_RD, NULL, "Queue Name"); + queue_list = SYSCTL_CHILDREN(queue_node); + + SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "interrupt_rate", + CTLFLAG_RD, &adapter->queues[i], + sizeof(&adapter->queues[i]), + igb_sysctl_interrupt_rate_handler, + "IU", "Interrupt Rate"); + + SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "txd_head", + CTLFLAG_RD, adapter, E1000_TDH(txr->me), + igb_sysctl_reg_handler, "IU", + "Transmit Descriptor Head"); + SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "txd_tail", + CTLFLAG_RD, adapter, E1000_TDT(txr->me), + igb_sysctl_reg_handler, "IU", + "Transmit Descriptor Tail"); + SYSCTL_ADD_QUAD(ctx, queue_list, OID_AUTO, "no_desc_avail", + CTLFLAG_RD, &txr->no_desc_avail, + "Queue No Descriptor Available"); + SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "tx_packets", + CTLFLAG_RD, &txr->total_packets, + "Queue Packets Transmitted"); + + SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "rxd_head", + CTLFLAG_RD, adapter, E1000_RDH(rxr->me), + igb_sysctl_reg_handler, "IU", + "Receive Descriptor Head"); + SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "rxd_tail", + CTLFLAG_RD, adapter, E1000_RDT(rxr->me), + igb_sysctl_reg_handler, "IU", + "Receive Descriptor Tail"); + SYSCTL_ADD_QUAD(ctx, queue_list, OID_AUTO, "rx_packets", + CTLFLAG_RD, &rxr->rx_packets, + "Queue Packets Received"); + SYSCTL_ADD_QUAD(ctx, queue_list, OID_AUTO, "rx_bytes", + CTLFLAG_RD, &rxr->rx_bytes, + "Queue Bytes Received"); + SYSCTL_ADD_UINT(ctx, queue_list, OID_AUTO, "lro_queued", + CTLFLAG_RD, &lro->lro_queued, 0, + "LRO Queued"); + SYSCTL_ADD_UINT(ctx, queue_list, OID_AUTO, "lro_flushed", + CTLFLAG_RD, &lro->lro_flushed, 0, + "LRO Flushed"); + } + + /* MAC stats get their own sub node */ + + stat_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "mac_stats", + CTLFLAG_RD, NULL, "MAC Statistics"); + stat_list = SYSCTL_CHILDREN(stat_node); + + /* + ** VF adapter has a very limited set of stats + ** since its not managing the metal, so to speak. + */ + if (adapter->vf_ifp) { + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "good_pkts_recvd", + CTLFLAG_RD, &stats->gprc, + "Good Packets Received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "good_pkts_txd", + CTLFLAG_RD, &stats->gptc, + "Good Packets Transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "good_octets_recvd", + CTLFLAG_RD, &stats->gorc, + "Good Octets Received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "good_octets_txd", + CTLFLAG_RD, &stats->gotc, + "Good Octets Transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "mcast_pkts_recvd", + CTLFLAG_RD, &stats->mprc, + "Multicast Packets Received"); + return; + } + + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "excess_coll", + CTLFLAG_RD, &stats->ecol, + "Excessive collisions"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "single_coll", + CTLFLAG_RD, &stats->scc, + "Single collisions"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "multiple_coll", + CTLFLAG_RD, &stats->mcc, + "Multiple collisions"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "late_coll", + CTLFLAG_RD, &stats->latecol, + "Late collisions"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "collision_count", + CTLFLAG_RD, &stats->colc, + "Collision Count"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "symbol_errors", + CTLFLAG_RD, &stats->symerrs, + "Symbol Errors"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "sequence_errors", + CTLFLAG_RD, &stats->sec, + "Sequence Errors"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "defer_count", + CTLFLAG_RD, &stats->dc, + "Defer Count"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "missed_packets", + CTLFLAG_RD, &stats->mpc, + "Missed Packets"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "recv_no_buff", + CTLFLAG_RD, &stats->rnbc, + "Receive No Buffers"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "recv_undersize", + CTLFLAG_RD, &stats->ruc, + "Receive Undersize"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "recv_fragmented", + CTLFLAG_RD, &stats->rfc, + "Fragmented Packets Received "); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "recv_oversize", + CTLFLAG_RD, &stats->roc, + "Oversized Packets Received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "recv_jabber", + CTLFLAG_RD, &stats->rjc, + "Recevied Jabber"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "recv_errs", + CTLFLAG_RD, &stats->rxerrc, + "Receive Errors"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "crc_errs", + CTLFLAG_RD, &stats->crcerrs, + "CRC errors"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "alignment_errs", + CTLFLAG_RD, &stats->algnerrc, + "Alignment Errors"); + /* On 82575 these are collision counts */ + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "coll_ext_errs", + CTLFLAG_RD, &stats->cexterr, + "Collision/Carrier extension errors"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "xon_recvd", + CTLFLAG_RD, &stats->xonrxc, + "XON Received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "xon_txd", + CTLFLAG_RD, &stats->xontxc, + "XON Transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "xoff_recvd", + CTLFLAG_RD, &stats->xoffrxc, + "XOFF Received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "xoff_txd", + CTLFLAG_RD, &stats->xofftxc, + "XOFF Transmitted"); + /* Packet Reception Stats */ + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "total_pkts_recvd", + CTLFLAG_RD, &stats->tpr, + "Total Packets Received "); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "good_pkts_recvd", + CTLFLAG_RD, &stats->gprc, + "Good Packets Received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "bcast_pkts_recvd", + CTLFLAG_RD, &stats->bprc, + "Broadcast Packets Received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "mcast_pkts_recvd", + CTLFLAG_RD, &stats->mprc, + "Multicast Packets Received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "rx_frames_64", + CTLFLAG_RD, &stats->prc64, + "64 byte frames received "); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "rx_frames_65_127", + CTLFLAG_RD, &stats->prc127, + "65-127 byte frames received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "rx_frames_128_255", + CTLFLAG_RD, &stats->prc255, + "128-255 byte frames received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "rx_frames_256_511", + CTLFLAG_RD, &stats->prc511, + "256-511 byte frames received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "rx_frames_512_1023", + CTLFLAG_RD, &stats->prc1023, + "512-1023 byte frames received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "rx_frames_1024_1522", + CTLFLAG_RD, &stats->prc1522, + "1023-1522 byte frames received"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "good_octets_recvd", + CTLFLAG_RD, &stats->gorc, + "Good Octets Received"); + + /* Packet Transmission Stats */ + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "good_octets_txd", + CTLFLAG_RD, &stats->gotc, + "Good Octets Transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "total_pkts_txd", + CTLFLAG_RD, &stats->tpt, + "Total Packets Transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "good_pkts_txd", + CTLFLAG_RD, &stats->gptc, + "Good Packets Transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "bcast_pkts_txd", + CTLFLAG_RD, &stats->bptc, + "Broadcast Packets Transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "mcast_pkts_txd", + CTLFLAG_RD, &stats->mptc, + "Multicast Packets Transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "tx_frames_64", + CTLFLAG_RD, &stats->ptc64, + "64 byte frames transmitted "); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "tx_frames_65_127", + CTLFLAG_RD, &stats->ptc127, + "65-127 byte frames transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "tx_frames_128_255", + CTLFLAG_RD, &stats->ptc255, + "128-255 byte frames transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "tx_frames_256_511", + CTLFLAG_RD, &stats->ptc511, + "256-511 byte frames transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "tx_frames_512_1023", + CTLFLAG_RD, &stats->ptc1023, + "512-1023 byte frames transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "tx_frames_1024_1522", + CTLFLAG_RD, &stats->ptc1522, + "1024-1522 byte frames transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "tso_txd", + CTLFLAG_RD, &stats->tsctc, + "TSO Contexts Transmitted"); + SYSCTL_ADD_QUAD(ctx, stat_list, OID_AUTO, "tso_ctx_fail", + CTLFLAG_RD, &stats->tsctfc, + "TSO Contexts Failed"); + + + /* Interrupt Stats */ + + int_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "interrupts", + CTLFLAG_RD, NULL, "Interrupt Statistics"); + int_list = SYSCTL_CHILDREN(int_node); + + SYSCTL_ADD_QUAD(ctx, int_list, OID_AUTO, "asserts", + CTLFLAG_RD, &stats->iac, + "Interrupt Assertion Count"); + + SYSCTL_ADD_QUAD(ctx, int_list, OID_AUTO, "rx_pkt_timer", + CTLFLAG_RD, &stats->icrxptc, + "Interrupt Cause Rx Pkt Timer Expire Count"); + + SYSCTL_ADD_QUAD(ctx, int_list, OID_AUTO, "rx_abs_timer", + CTLFLAG_RD, &stats->icrxatc, + "Interrupt Cause Rx Abs Timer Expire Count"); + + SYSCTL_ADD_QUAD(ctx, int_list, OID_AUTO, "tx_pkt_timer", + CTLFLAG_RD, &stats->ictxptc, + "Interrupt Cause Tx Pkt Timer Expire Count"); + + SYSCTL_ADD_QUAD(ctx, int_list, OID_AUTO, "tx_abs_timer", + CTLFLAG_RD, &stats->ictxatc, + "Interrupt Cause Tx Abs Timer Expire Count"); + + SYSCTL_ADD_QUAD(ctx, int_list, OID_AUTO, "tx_queue_empty", + CTLFLAG_RD, &stats->ictxqec, + "Interrupt Cause Tx Queue Empty Count"); + + SYSCTL_ADD_QUAD(ctx, int_list, OID_AUTO, "tx_queue_min_thresh", + CTLFLAG_RD, &stats->ictxqmtc, + "Interrupt Cause Tx Queue Min Thresh Count"); + + SYSCTL_ADD_QUAD(ctx, int_list, OID_AUTO, "rx_desc_min_thresh", + CTLFLAG_RD, &stats->icrxdmtc, + "Interrupt Cause Rx Desc Min Thresh Count"); + + SYSCTL_ADD_QUAD(ctx, int_list, OID_AUTO, "rx_overrun", + CTLFLAG_RD, &stats->icrxoc, + "Interrupt Cause Receiver Overrun Count"); + + /* Host to Card Stats */ + + host_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "host", + CTLFLAG_RD, NULL, + "Host to Card Statistics"); + + host_list = SYSCTL_CHILDREN(host_node); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "breaker_tx_pkt", + CTLFLAG_RD, &stats->cbtmpc, + "Circuit Breaker Tx Packet Count"); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "host_tx_pkt_discard", + CTLFLAG_RD, &stats->htdpmc, + "Host Transmit Discarded Packets"); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "rx_pkt", + CTLFLAG_RD, &stats->rpthc, + "Rx Packets To Host"); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "breaker_rx_pkts", + CTLFLAG_RD, &stats->cbrmpc, + "Circuit Breaker Rx Packet Count"); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "breaker_rx_pkt_drop", + CTLFLAG_RD, &stats->cbrdpc, + "Circuit Breaker Rx Dropped Count"); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "tx_good_pkt", + CTLFLAG_RD, &stats->hgptc, + "Host Good Packets Tx Count"); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "breaker_tx_pkt_drop", + CTLFLAG_RD, &stats->htcbdpc, + "Host Tx Circuit Breaker Dropped Count"); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "rx_good_bytes", + CTLFLAG_RD, &stats->hgorc, + "Host Good Octets Received Count"); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "tx_good_bytes", + CTLFLAG_RD, &stats->hgotc, + "Host Good Octets Transmit Count"); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "length_errors", + CTLFLAG_RD, &stats->lenerrs, + "Length Errors"); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "serdes_violation_pkt", + CTLFLAG_RD, &stats->scvpc, + "SerDes/SGMII Code Violation Pkt Count"); + + SYSCTL_ADD_QUAD(ctx, host_list, OID_AUTO, "header_redir_missed", + CTLFLAG_RD, &stats->hrmpc, + "Header Redirection Missed Packet Count"); +} + + +/********************************************************************** + * + * This routine provides a way to dump out the adapter eeprom, + * often a useful debug/service tool. This only dumps the first + * 32 words, stuff that matters is in that extent. + * + **********************************************************************/ +static int +igb_sysctl_nvm_info(SYSCTL_HANDLER_ARGS) +{ + struct adapter *adapter; + int error; + int result; + + result = -1; + error = sysctl_handle_int(oidp, &result, 0, req); + + if (error || !req->newptr) + return (error); + + /* + * This value will cause a hex dump of the + * first 32 16-bit words of the EEPROM to + * the screen. + */ + if (result == 1) { + adapter = (struct adapter *)arg1; + igb_print_nvm_info(adapter); + } + + return (error); +} + +static void +igb_print_nvm_info(struct adapter *adapter) +{ + u16 eeprom_data; + int i, j, row = 0; + + /* Its a bit crude, but it gets the job done */ + printf("\nInterface EEPROM Dump:\n"); + printf("Offset\n0x0000 "); + for (i = 0, j = 0; i < 32; i++, j++) { + if (j == 8) { /* Make the offset block */ + j = 0; ++row; + printf("\n0x00%x0 ",row); + } + e1000_read_nvm(&adapter->hw, i, 1, &eeprom_data); + printf("%04x ", eeprom_data); + } + printf("\n"); +} + +static void +igb_set_sysctl_value(struct adapter *adapter, const char *name, + const char *description, int *limit, int value) +{ + *limit = value; + SYSCTL_ADD_INT(device_get_sysctl_ctx(adapter->dev), + SYSCTL_CHILDREN(device_get_sysctl_tree(adapter->dev)), + OID_AUTO, name, CTLTYPE_INT|CTLFLAG_RW, limit, value, description); +} + +/* +** Set flow control using sysctl: +** Flow control values: +** 0 - off +** 1 - rx pause +** 2 - tx pause +** 3 - full +*/ +static int +igb_set_flowcntl(SYSCTL_HANDLER_ARGS) +{ + int error; + static int input = 3; /* default is full */ + struct adapter *adapter = (struct adapter *) arg1; + + error = sysctl_handle_int(oidp, &input, 0, req); + + if ((error) || (req->newptr == NULL)) + return (error); + + switch (input) { + case e1000_fc_rx_pause: + case e1000_fc_tx_pause: + case e1000_fc_full: + case e1000_fc_none: + adapter->hw.fc.requested_mode = input; + adapter->fc = input; + break; + default: + /* Do nothing */ + return (error); + } + + adapter->hw.fc.current_mode = adapter->hw.fc.requested_mode; + e1000_force_mac_fc(&adapter->hw); + return (error); +} + +/* +** Manage DMA Coalesce: +** Control values: +** 0/1 - off/on +** Legal timer values are: +** 250,500,1000-10000 in thousands +*/ +static int +igb_sysctl_dmac(SYSCTL_HANDLER_ARGS) +{ + struct adapter *adapter = (struct adapter *) arg1; + int error; + + error = sysctl_handle_int(oidp, &adapter->dmac, 0, req); + + if ((error) || (req->newptr == NULL)) + return (error); + + switch (adapter->dmac) { + case 0: + /*Disabling */ + break; + case 1: /* Just enable and use default */ + adapter->dmac = 1000; + break; + case 250: + case 500: + case 1000: + case 2000: + case 3000: + case 4000: + case 5000: + case 6000: + case 7000: + case 8000: + case 9000: + case 10000: + /* Legal values - allow */ + break; + default: + /* Do nothing, illegal value */ + adapter->dmac = 0; + return (EINVAL); + } + /* Reinit the interface */ + igb_init(adapter); + return (error); +} + +/* +** Manage Energy Efficient Ethernet: +** Control values: +** 0/1 - enabled/disabled +*/ +static int +igb_sysctl_eee(SYSCTL_HANDLER_ARGS) +{ + struct adapter *adapter = (struct adapter *) arg1; + int error, value; + + value = adapter->hw.dev_spec._82575.eee_disable; + error = sysctl_handle_int(oidp, &value, 0, req); + if (error || req->newptr == NULL) + return (error); + IGB_CORE_LOCK(adapter); + adapter->hw.dev_spec._82575.eee_disable = (value != 0); + igb_init_locked(adapter); + IGB_CORE_UNLOCK(adapter); + return (0); +} Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/if_igb.c ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/if_igb.h =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/if_igb.h (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/if_igb.h (revision 291673) @@ -0,0 +1,578 @@ +/****************************************************************************** + + Copyright (c) 2001-2013, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#ifndef _IGB_H_DEFINED_ +#define _IGB_H_DEFINED_ + +/* Tunables */ + +/* + * IGB_TXD: Maximum number of Transmit Descriptors + * + * This value is the number of transmit descriptors allocated by the driver. + * Increasing this value allows the driver to queue more transmits. Each + * descriptor is 16 bytes. + * Since TDLEN should be multiple of 128bytes, the number of transmit + * desscriptors should meet the following condition. + * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 + */ +#define IGB_MIN_TXD 256 +#define IGB_DEFAULT_TXD 1024 +#define IGB_MAX_TXD 4096 + +/* + * IGB_RXD: Maximum number of Receive Descriptors + * + * This value is the number of receive descriptors allocated by the driver. + * Increasing this value allows the driver to buffer more incoming packets. + * Each descriptor is 16 bytes. A receive buffer is also allocated for each + * descriptor. The maximum MTU size is 16110. + * Since TDLEN should be multiple of 128bytes, the number of transmit + * desscriptors should meet the following condition. + * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 + */ +#define IGB_MIN_RXD 256 +#define IGB_DEFAULT_RXD 1024 +#define IGB_MAX_RXD 4096 + +/* + * IGB_TIDV - Transmit Interrupt Delay Value + * Valid Range: 0-65535 (0=off) + * Default Value: 64 + * This value delays the generation of transmit interrupts in units of + * 1.024 microseconds. Transmit interrupt reduction can improve CPU + * efficiency if properly tuned for specific network traffic. If the + * system is reporting dropped transmits, this value may be set too high + * causing the driver to run out of available transmit descriptors. + */ +#define IGB_TIDV 64 + +/* + * IGB_TADV - Transmit Absolute Interrupt Delay Value + * Valid Range: 0-65535 (0=off) + * Default Value: 64 + * This value, in units of 1.024 microseconds, limits the delay in which a + * transmit interrupt is generated. Useful only if IGB_TIDV is non-zero, + * this value ensures that an interrupt is generated after the initial + * packet is sent on the wire within the set amount of time. Proper tuning, + * along with IGB_TIDV, may improve traffic throughput in specific + * network conditions. + */ +#define IGB_TADV 64 + +/* + * IGB_RDTR - Receive Interrupt Delay Timer (Packet Timer) + * Valid Range: 0-65535 (0=off) + * Default Value: 0 + * This value delays the generation of receive interrupts in units of 1.024 + * microseconds. Receive interrupt reduction can improve CPU efficiency if + * properly tuned for specific network traffic. Increasing this value adds + * extra latency to frame reception and can end up decreasing the throughput + * of TCP traffic. If the system is reporting dropped receives, this value + * may be set too high, causing the driver to run out of available receive + * descriptors. + * + * CAUTION: When setting IGB_RDTR to a value other than 0, adapters + * may hang (stop transmitting) under certain network conditions. + * If this occurs a WATCHDOG message is logged in the system + * event log. In addition, the controller is automatically reset, + * restoring the network connection. To eliminate the potential + * for the hang ensure that IGB_RDTR is set to 0. + */ +#define IGB_RDTR 0 + +/* + * Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544) + * Valid Range: 0-65535 (0=off) + * Default Value: 64 + * This value, in units of 1.024 microseconds, limits the delay in which a + * receive interrupt is generated. Useful only if IGB_RDTR is non-zero, + * this value ensures that an interrupt is generated after the initial + * packet is received within the set amount of time. Proper tuning, + * along with IGB_RDTR, may improve traffic throughput in specific network + * conditions. + */ +#define IGB_RADV 64 + +/* + * This parameter controls the duration of transmit watchdog timer. + */ +#define IGB_WATCHDOG (10 * hz) + +/* + * This parameter controls when the driver calls the routine to reclaim + * transmit descriptors. Cleaning earlier seems a win. + */ +#define IGB_TX_CLEANUP_THRESHOLD (adapter->num_tx_desc / 2) + +/* + * This parameter controls whether or not autonegotation is enabled. + * 0 - Disable autonegotiation + * 1 - Enable autonegotiation + */ +#define DO_AUTO_NEG 1 + +/* + * This parameter control whether or not the driver will wait for + * autonegotiation to complete. + * 1 - Wait for autonegotiation to complete + * 0 - Don't wait for autonegotiation to complete + */ +#define WAIT_FOR_AUTO_NEG_DEFAULT 0 + +/* Tunables -- End */ + +#define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ + ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ + ADVERTISE_1000_FULL) + +#define AUTO_ALL_MODES 0 + +/* PHY master/slave setting */ +#define IGB_MASTER_SLAVE e1000_ms_hw_default + +/* Support AutoMediaDetect for Marvell M88 PHY in i354 */ +#define IGB_MEDIA_RESET (1 << 0) + +/* + * Micellaneous constants + */ +#define IGB_VENDOR_ID 0x8086 + +#define IGB_JUMBO_PBA 0x00000028 +#define IGB_DEFAULT_PBA 0x00000030 +#define IGB_SMARTSPEED_DOWNSHIFT 3 +#define IGB_SMARTSPEED_MAX 15 +#define IGB_MAX_LOOP 10 + +#define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : \ + ((hw->mac.type <= e1000_82576) ? 16 : 8)) +#define IGB_RX_HTHRESH 8 +#define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \ + adapter->msix_mem) ? 1 : 4) + +#define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8) +#define IGB_TX_HTHRESH 1 +#define IGB_TX_WTHRESH ((hw->mac.type != e1000_82575 && \ + adapter->msix_mem) ? 1 : 16) + +#define MAX_NUM_MULTICAST_ADDRESSES 128 +#define PCI_ANY_ID (~0U) +#define ETHER_ALIGN 2 +#define IGB_TX_BUFFER_SIZE ((uint32_t) 1514) +#define IGB_FC_PAUSE_TIME 0x0680 +#define IGB_EEPROM_APME 0x400; +/* Queue minimum free for use */ +#define IGB_QUEUE_THRESHOLD (adapter->num_tx_desc / 8) + +/* + * TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be + * multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will + * also optimize cache line size effect. H/W supports up to cache line size 128. + */ +#define IGB_DBA_ALIGN 128 + +#define SPEED_MODE_BIT (1<<21) /* On PCI-E MACs only */ + +/* PCI Config defines */ +#define IGB_MSIX_BAR 3 + +/* Defines for printing debug information */ +#define DEBUG_INIT 0 +#define DEBUG_IOCTL 0 +#define DEBUG_HW 0 + +#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") +#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) +#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) +#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") +#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) +#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) +#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") +#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) +#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) + +#define IGB_MAX_SCATTER 64 +#define IGB_VFTA_SIZE 128 +#define IGB_BR_SIZE 4096 /* ring buf size */ +#define IGB_TSO_SIZE (65535 + sizeof(struct ether_vlan_header)) +#define IGB_TSO_SEG_SIZE 4096 /* Max dma segment size */ +#define IGB_TXPBSIZE 20408 +#define IGB_HDR_BUF 128 +#define IGB_PKTTYPE_MASK 0x0000FFF0 +#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coalesce Flush */ +#define ETH_ZLEN 60 +#define ETH_ADDR_LEN 6 + +/* Offload bits in mbuf flag */ +#if __FreeBSD_version >= 800000 +#define CSUM_OFFLOAD (CSUM_IP|CSUM_TCP|CSUM_UDP|CSUM_SCTP) +#else +#define CSUM_OFFLOAD (CSUM_IP|CSUM_TCP|CSUM_UDP) +#endif + +/* Backward compatibility for stable/8 */ +#if __FreeBSD_version < 900000 +#define SYSCTL_ADD_UQUAD SYSCTL_ADD_QUAD +#endif + +/* Define the starting Interrupt rate per Queue */ +#define IGB_INTS_PER_SEC 8000 +#define IGB_DEFAULT_ITR ((1000000/IGB_INTS_PER_SEC) << 2) + +#define IGB_LINK_ITR 2000 +#define I210_LINK_DELAY 1000 + +/* Precision Time Sync (IEEE 1588) defines */ +#define ETHERTYPE_IEEE1588 0x88F7 +#define PICOSECS_PER_TICK 20833 +#define TSYNC_PORT 319 /* UDP port for the protocol */ + +/* + * Bus dma allocation structure used by + * e1000_dma_malloc and e1000_dma_free. + */ +struct igb_dma_alloc { + bus_addr_t dma_paddr; + caddr_t dma_vaddr; + bus_dma_tag_t dma_tag; + bus_dmamap_t dma_map; + bus_dma_segment_t dma_seg; + int dma_nseg; +}; + + +/* +** Driver queue struct: this is the interrupt container +** for the associated tx and rx ring. +*/ +struct igb_queue { + struct adapter *adapter; + u32 msix; /* This queue's MSIX vector */ + u32 eims; /* This queue's EIMS bit */ + u32 eitr_setting; + struct resource *res; + void *tag; + struct tx_ring *txr; + struct rx_ring *rxr; + struct task que_task; + struct taskqueue *tq; + u64 irqs; +}; + +/* + * The transmit ring, one per queue + */ +struct tx_ring { + struct adapter *adapter; + struct mtx tx_mtx; + u32 me; + int watchdog_time; + union e1000_adv_tx_desc *tx_base; + struct igb_tx_buf *tx_buffers; + struct igb_dma_alloc txdma; + volatile u16 tx_avail; + u16 next_avail_desc; + u16 next_to_clean; + u16 process_limit; + u16 num_desc; + enum { + IGB_QUEUE_IDLE = 1, + IGB_QUEUE_WORKING = 2, + IGB_QUEUE_HUNG = 4, + IGB_QUEUE_DEPLETED = 8, + } queue_status; + u32 txd_cmd; + bus_dma_tag_t txtag; + char mtx_name[16]; +#ifndef IGB_LEGACY_TX + struct buf_ring *br; + struct task txq_task; +#endif + u32 bytes; /* used for AIM */ + u32 packets; + /* Soft Stats */ + unsigned long tso_tx; + unsigned long no_tx_map_avail; + unsigned long no_tx_dma_setup; + u64 no_desc_avail; + u64 total_packets; +}; + +/* + * Receive ring: one per queue + */ +struct rx_ring { + struct adapter *adapter; + u32 me; + struct igb_dma_alloc rxdma; + union e1000_adv_rx_desc *rx_base; + struct lro_ctrl lro; + bool lro_enabled; + bool hdr_split; + bool discard; + struct mtx rx_mtx; + char mtx_name[16]; + u32 next_to_refresh; + u32 next_to_check; + struct igb_rx_buf *rx_buffers; + bus_dma_tag_t htag; /* dma tag for rx head */ + bus_dma_tag_t ptag; /* dma tag for rx packet */ + /* + * First/last mbuf pointers, for + * collecting multisegment RX packets. + */ + struct mbuf *fmp; + struct mbuf *lmp; + + u32 bytes; + u32 packets; + int rdt; + int rdh; + + /* Soft stats */ + u64 rx_split_packets; + u64 rx_discarded; + u64 rx_packets; + u64 rx_bytes; +}; + +struct adapter { + struct ifnet *ifp; + struct e1000_hw hw; + + struct e1000_osdep osdep; + struct device *dev; + struct cdev *led_dev; + + struct resource *pci_mem; + struct resource *msix_mem; + int memrid; + + /* + * Interrupt resources: this set is + * either used for legacy, or for Link + * when doing MSIX + */ + void *tag; + struct resource *res; + + struct ifmedia media; + struct callout timer; + int msix; + int if_flags; + int pause_frames; + + struct mtx core_mtx; + + eventhandler_tag vlan_attach; + eventhandler_tag vlan_detach; + + u16 num_vlans; + u16 num_queues; + + /* + ** Shadow VFTA table, this is needed because + ** the real vlan filter table gets cleared during + ** a soft reset and the driver needs to be able + ** to repopulate it. + */ + u32 shadow_vfta[IGB_VFTA_SIZE]; + + /* Info about the interface */ + u32 optics; + u32 fc; /* local flow ctrl setting */ + int advertise; /* link speeds */ + bool link_active; + u16 max_frame_size; + u16 num_segs; + u16 link_speed; + bool link_up; + u32 linkvec; + u16 link_duplex; + u32 dmac; + int link_mask; + + /* Flags */ + u32 flags; + + /* Mbuf cluster size */ + u32 rx_mbuf_sz; + + /* Support for pluggable optics */ + bool sfp_probe; + struct task link_task; /* Link tasklet */ + struct task mod_task; /* SFP tasklet */ + struct task msf_task; /* Multispeed Fiber */ + struct taskqueue *tq; + + /* + ** Queues: + ** This is the irq holder, it has + ** and RX/TX pair or rings associated + ** with it. + */ + struct igb_queue *queues; + + /* + * Transmit rings: + * Allocated at run time, an array of rings. + */ + struct tx_ring *tx_rings; + u32 num_tx_desc; + + /* + * Receive rings: + * Allocated at run time, an array of rings. + */ + struct rx_ring *rx_rings; + u64 que_mask; + u32 num_rx_desc; + + /* Multicast array memory */ + u8 *mta; + + /* Misc stats maintained by the driver */ + unsigned long dropped_pkts; + unsigned long mbuf_defrag_failed; + unsigned long mbuf_header_failed; + unsigned long mbuf_packet_failed; + unsigned long no_tx_dma_setup; + unsigned long watchdog_events; + unsigned long link_irq; + unsigned long rx_overruns; + unsigned long device_control; + unsigned long rx_control; + unsigned long int_mask; + unsigned long eint_mask; + unsigned long packet_buf_alloc_rx; + unsigned long packet_buf_alloc_tx; + /* Used in pf and vf */ + void *stats; + + int enable_aim; + int has_manage; + int wol; + int rx_process_limit; + u16 vf_ifp; /* a VF interface */ + bool in_detach; /* Used only in igb_ioctl */ + +}; + +/* ****************************************************************************** + * vendor_info_array + * + * This array contains the list of Subvendor/Subdevice IDs on which the driver + * should load. + * + * ******************************************************************************/ +typedef struct _igb_vendor_info_t { + unsigned int vendor_id; + unsigned int device_id; + unsigned int subvendor_id; + unsigned int subdevice_id; + unsigned int index; +} igb_vendor_info_t; + +struct igb_tx_buf { + union e1000_adv_tx_desc *eop; + struct mbuf *m_head; + bus_dmamap_t map; +}; + +struct igb_rx_buf { + struct mbuf *m_head; + struct mbuf *m_pack; + bus_dmamap_t hmap; /* bus_dma map for header */ + bus_dmamap_t pmap; /* bus_dma map for packet */ +}; + +/* +** Find the number of unrefreshed RX descriptors +*/ +static inline u16 +igb_rx_unrefreshed(struct rx_ring *rxr) +{ + struct adapter *adapter = rxr->adapter; + + if (rxr->next_to_check > rxr->next_to_refresh) + return (rxr->next_to_check - rxr->next_to_refresh - 1); + else + return ((adapter->num_rx_desc + rxr->next_to_check) - + rxr->next_to_refresh - 1); +} + +#define IGB_CORE_LOCK_INIT(_sc, _name) \ + mtx_init(&(_sc)->core_mtx, _name, "IGB Core Lock", MTX_DEF) +#define IGB_CORE_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->core_mtx) +#define IGB_CORE_LOCK(_sc) mtx_lock(&(_sc)->core_mtx) +#define IGB_CORE_UNLOCK(_sc) mtx_unlock(&(_sc)->core_mtx) +#define IGB_CORE_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->core_mtx, MA_OWNED) + +#define IGB_TX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->tx_mtx) +#define IGB_TX_LOCK(_sc) mtx_lock(&(_sc)->tx_mtx) +#define IGB_TX_UNLOCK(_sc) mtx_unlock(&(_sc)->tx_mtx) +#define IGB_TX_TRYLOCK(_sc) mtx_trylock(&(_sc)->tx_mtx) +#define IGB_TX_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->tx_mtx, MA_OWNED) + +#define IGB_RX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->rx_mtx) +#define IGB_RX_LOCK(_sc) mtx_lock(&(_sc)->rx_mtx) +#define IGB_RX_UNLOCK(_sc) mtx_unlock(&(_sc)->rx_mtx) +#define IGB_RX_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->rx_mtx, MA_OWNED) + +#define UPDATE_VF_REG(reg, last, cur) \ +{ \ + u32 new = E1000_READ_REG(hw, reg); \ + if (new < last) \ + cur += 0x100000000LL; \ + last = new; \ + cur &= 0xFFFFFFFF00000000LL; \ + cur |= new; \ +} + +#if __FreeBSD_version >= 800000 && __FreeBSD_version < 800504 +static __inline int +drbr_needs_enqueue(struct ifnet *ifp, struct buf_ring *br) +{ +#ifdef ALTQ + if (ALTQ_IS_ENABLED(&ifp->if_snd)) + return (1); +#endif + return (!buf_ring_empty(br)); +} +#endif + +#endif /* _IGB_H_DEFINED_ */ + + Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/if_igb.h ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: projects/intel_net_refactor/sys/contrib/dev/igb/igb.4 =================================================================== --- projects/intel_net_refactor/sys/contrib/dev/igb/igb.4 (nonexistent) +++ projects/intel_net_refactor/sys/contrib/dev/igb/igb.4 (revision 291673) @@ -0,0 +1,142 @@ +.\" Copyright (c) 2012 Intel Corporation +.\" All rights reserved. +.\" Redistribution and use in source and binary forms of the Software, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code of the Software may retain the above +.\" copyright notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form of the Software may reproduce the +.\" above copyright notice, this list of conditions and the following +.\" disclaimer in the documentation and/or other materials provided with the +.\" distribution. +.\" 3. Neither the name of the Intel Corporation nor the names of its contributors +.\" shall be used to endorse or promote products derived from this Software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +.\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL THE INTEL OR ITS CONTRIBUTORS BE LIABLE +.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +.\" SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +.\" CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +.\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE +.\" USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.\" +.\" * Other names and brands may be claimed as the property of others. +.\" +.\" $FreeBSD$ +.\" +.Dd January 5, 2012 +.Dt IGB 4 +.Os +.Sh NAME +.Nm igb +.Nd "FreeBSD* Driver for Intel® Ethernet" +.Sh SYNOPSIS +.Cd "device igb" +.Sh DESCRIPTION +The igb driver provides support for PCI gigabit Ethernet adapters based on +the Intel 82575 Ethernet controller chips. For a list of supported adapters, +see the +.Pa README +included with the driver. +.Pp +For questions related to hardware requirements, +refer to the documentation supplied with your Intel PRO/1000 adapter. +All hardware requirements listed apply to use with +.Fx . +.Pp +Support for Jumbo Frames is provided via the interface MTU setting. +Selecting an MTU larger than 1500 bytes with the +.Xr ifconfig 8 +utility configures the adapter to receive and transmit Jumbo Frames. +The maximum MTU setting for Jumbo Frames is 9216. This value coincides +with the maximum Jumbo Frames size of 9234. +.Pp +This driver version supports VLANs. +For information on enabling VLANs, see the +.Pa README . +The +.Nm +driver supports the following media types: +.Bl -tag -width ".Cm 10baseT/UTP" +.It Cm autoselect +Enables auto-negotiation for speed and duplex. +.It Cm 10baseT/UTP +Sets 10Mbps operation. +Use the +.Cm mediaopt +option to select +.Cm full-duplex +mode. +.It Cm 100baseTX +Sets 100Mbps operation. +Use the +.Cm mediaopt +option to select +.Cm full-duplex +mode. +.It Cm 1000baseSX +Sets 1000Mbps operation. +Only +.Cm full-duplex +mode is supported at this speed. +.It Cm 1000baseTX +Sets 1000Mbps operation. +Only +.Cm full-duplex +mode is supported at this speed. +.El +.Pp +The +.Nm +driver supports both full-duplex and half-duplex. +Use mediaopt to force the driver to either of these settings. +Note that the only valid parameter for mediaopt is full-duplex; +to force the driver to half-duplex when running at less than gibabit speed, +leave mediaopt unspecified. +.Pp +For more information on configuring this device, see +.Xr ifconfig 8 . +.Sh DIAGNOSTICS +.Bl -diag +.It "igb%d: Unable to allocate bus resource: memory" +A fatal initialization error has occurred. +.It "igb%d: Unable to allocate bus resource: interrupt" +A fatal initialization error has occurred. +.It "igb%d: watchdog timeout -- resetting" +The device has stopped responding to the network, or there is a problem with +the network connection (cable). +.El +.Sh SUPPORT +For additional information regarding building and installation, +see the +.Pa README +included with the driver. +For general information and support, +go to the Intel support website at: +.Pa http://support.intel.com . +.Pp +If an issue is identified with the released source code on the supported kernel +with a supported adapter, email the specific information related to the +issue to +.Aq freebsdnic@mailbox.intel.com . +.Sh SEE ALSO +.Xr arp 4 , +.Xr gx 4 , +.Xr netintro 4 , +.Xr ng_ether 4 , +.Xr vlan 4 , +.Xr ifconfig 8 +.Sh HISTORY +The +.Nm +device driver first appeared in +.Fx 4.4 . +.Sh AUTHORS +The +.Nm +driver was written by +.An Intel Corporation Aq freebsd@intel.com Property changes on: projects/intel_net_refactor/sys/contrib/dev/igb/igb.4 ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property