Index: stable/10/sys/arm/conf/BEAGLEBONE =================================================================== --- stable/10/sys/arm/conf/BEAGLEBONE (revision 287081) +++ stable/10/sys/arm/conf/BEAGLEBONE (revision 287082) @@ -1,161 +1,161 @@ # # BEAGLEBONE -- Custom configuration for the BeagleBone ARM development # platforms, check out http://www.beagleboard.org/bone and # http://www.beagleboard.org/black. This kernel config file is used for the # original BeagleBone and the BeagleBone Black. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident BEAGLEBONE include "../ti/am335x/std.am335x" makeoptions MODULES_EXTRA="dtb/am335x" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options BREAK_TO_DEBUGGER +options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS server support #options NFSD # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:mmcsd0s2\" # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c device am335x_pmic # AM335x Power Management IC (TPC65217) device am335x_rtc # RTC support (power management only) # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # GPIO device gpio device gpioled # ADC support device ti_adc # Watchdog support # If we don't enable the watchdog driver, the system could potentially # reboot automatically because the boot loader might have enabled the # watchdog. device ti_wdt # TI Programmable Realtime Unit support device ti_pruss # Mailbox support device ti_mbox # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device musb device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smscphy device cpsw device bpf # USB Ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet # Device mode support and USFS template device usb_template # Control of the gadget device usfs # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: stable/10/sys/arm/conf/CUBIEBOARD =================================================================== --- stable/10/sys/arm/conf/CUBIEBOARD (revision 287081) +++ stable/10/sys/arm/conf/CUBIEBOARD (revision 287082) @@ -1,142 +1,142 @@ # # CUBIEBOARD -- Custom configuration for the CUBIEBOARD ARM development # platform, check out http://www.cubieboard.org # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD include "../allwinner/std.a10" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options BREAK_TO_DEBUGGER +options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" # MMC/SD/SDIO Card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers #options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf device emac # USB ethernet support, requires miibus device miibus # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard.dts Index: stable/10/sys/arm/conf/CUBIEBOARD2 =================================================================== --- stable/10/sys/arm/conf/CUBIEBOARD2 (revision 287081) +++ stable/10/sys/arm/conf/CUBIEBOARD2 (revision 287082) @@ -1,143 +1,143 @@ # # CUBIEBOARD2 -- Custom configuration for the CUBIEBOARD2 ARM development # platform, check out http://www.cubieboard.org # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD2 include "../allwinner/a20/std.a20" options HZ=100 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options BREAK_TO_DEBUGGER +options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" # MMC/SD/SDIO Card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers #options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf device emac # USB ethernet support, requires miibus device miibus # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard2.dts Index: stable/10/sys/arm/conf/DOCKSTAR =================================================================== --- stable/10/sys/arm/conf/DOCKSTAR (revision 287081) +++ stable/10/sys/arm/conf/DOCKSTAR (revision 287082) @@ -1,168 +1,167 @@ # # Custom kernel for Seagate DockStar (Marvell SheevaPlug based) devices. # # $FreeBSD$ # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ # #NO_UNIVERSE ident DOCKSTAR include "../mv/kirkwood/std.db88f6xxx" makeoptions FDT_DTS_FILE=dockstar.dts options SOC_MV_KIRKWOOD options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options SOFTUPDATES options CD9660 # ISO 9660 filesystem options FFS # Berkeley Fast Filesystem options TMPFS # Efficient memory filesystem options MSDOSFS # MS DOS File System (FAT, FAT32) options NULLFS # NULL filesystem options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_ELI # Disk encryption. options GEOM_LABEL # Providers labelization. options GEOM_PART_GPT # GPT partitioning # Flattened Device Tree device fdt options FDT options FDT_DTB_STATIC # Misc pseudo devices device bpf # Required for DHCP device faith # IPv6-to-IPv4 relaying (translation) device firmware # firmware(9) required for USB wlan device gif # IPv6 and IPv4 tunneling device loop # Network loopback device md # Memory/malloc disk device pty # BSD-style compatibility pseudo ttys device random # Entropy device device tun # Packet tunnel. device ether # Required for all ethernet devices device vlan # 802.1Q VLAN support device wlan # 802.11 WLAN support # cam support for umass and ahci device scbus device pass device da # Serial ports device uart # Networking device mge # Marvell Gigabit Ethernet controller device mii device e1000phy # USB options USB_HOST_ALIGN=32 # Align DMA to cacheline #options USB_DEBUG # Compile in USB debug support device usb # Basic usb support device ehci # USB host controller device umass # Mass storage device uhid # Human-interface devices device rum # Ralink Technology RT2501USB wireless NICs device uath # Atheros AR5523 wireless NICs device ural # Ralink Technology RT2500USB wireless NICs device zyd # ZyDAS zb1211/zb1211b wireless NICs device urtw # Realtek RTL8187B/L USB device upgt # Conexant/Intersil PrismGT SoftMAC USB device u3g # USB-based 3G modems (Option, Huawei, Sierra) # I2C (TWSI) device iic device iicbus # Sound device sound device snd_uaudio #crypto device cesa # Marvell security engine device crypto device cryptodev # IPSec device enc options IPSEC options IPSEC_NAT_T options TCP_SIGNATURE # include support for RFC 2385 # IPFW options IPFIREWALL options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options IPFIREWALL_NAT options LIBALIAS options DUMMYNET options IPDIVERT #PF device pf device pflog device pfsync # ALTQ, required for PF options ALTQ # Basic ALTQ support options ALTQ_CBQ # Class Based Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable #options ALTQ_DEBUG # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options BREAK_TO_DEBUGGER options ALT_BREAK_TO_DEBUGGER options DDB options KDB #options DIAGNOSTIC #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB # Enable these options for nfs root configured via BOOTP. options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options BOOTP #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=mge0 # If not using BOOTP, use something like one of these... #options ROOTDEVNAME=\"ufs:/dev/da0a\" options ROOTDEVNAME=\"ufs:/dev/da0s1a\" #options ROOTDEVNAME=\"ufs:/dev/da0p10\" #options ROOTDEVNAME=\"nfs:192.168.0.254/dreamplug\" Index: stable/10/sys/arm/conf/DREAMPLUG-1001 =================================================================== --- stable/10/sys/arm/conf/DREAMPLUG-1001 (revision 287081) +++ stable/10/sys/arm/conf/DREAMPLUG-1001 (revision 287082) @@ -1,184 +1,183 @@ # Kernel config for GlobalScale Technologies DreamPlug version 1001. # # This is for units that are version 10, revision 01, with NOR SPI flash. # These units are identified with the number "1001" on the S/N label. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ # #NO_UNIVERSE ident DREAMPLUG-1001 include "../mv/kirkwood/std.db88f6xxx" makeoptions FDT_DTS_FILE=dreamplug-1001.dts options SOC_MV_KIRKWOOD options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options SOFTUPDATES options TMPFS # Efficient memory filesystem options CD9660 # ISO 9660 filesystem options FFS # Berkeley Fast Filesystem options MSDOSFS # MS DOS File System (FAT, FAT32) options NULLFS # NULL filesystem options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_ELI # Disk encryption. options GEOM_LABEL # Providers labelization. options GEOM_PART_GPT # GPT partitioning # Flattened Device Tree device fdt options FDT options FDT_DTB_STATIC # Misc pseudo devices device bpf # Required for DHCP device faith # IPv6-to-IPv4 relaying (translation) device firmware # firmware(9) required for USB wlan device gif # IPv6 and IPv4 tunneling device loop # Network loopback device md # Memory/malloc disk device pty # BSD-style compatibility pseudo ttys device random # Entropy device device tun # Packet tunnel. device ether # Required for all ethernet devices device vlan # 802.1Q VLAN support device wlan # 802.11 WLAN support # cam support for umass and ahci device scbus device pass device da device cd # Serial ports device uart # Networking device mge # Marvell Gigabit Ethernet controller device mii device e1000phy # USB options USB_HOST_ALIGN=32 # Align DMA to cacheline #options USB_DEBUG # Compile in USB debug support device usb # Basic usb support device ehci # USB host controller device umass # Mass storage device uhid # Human-interface devices device rum # Ralink Technology RT2501USB wireless NICs device uath # Atheros AR5523 wireless NICs device ural # Ralink Technology RT2500USB wireless NICs device zyd # ZyDAS zb1211/zb1211b wireless NICs device urtw # Realtek RTL8187B/L USB device upgt # Conexant/Intersil PrismGT SoftMAC USB device u3g # USB-based 3G modems (Option, Huawei, Sierra) # I2C (TWSI) device iic device iicbus # SATA device mvs device ahci # Sound device sound device snd_uaudio #crypto device cesa # Marvell security engine device crypto device cryptodev # IPSec device enc options IPSEC options IPSEC_NAT_T options TCP_SIGNATURE # include support for RFC 2385 # IPFW options IPFIREWALL options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options IPFIREWALL_NAT options LIBALIAS options DUMMYNET options IPDIVERT #PF device pf device pflog device pfsync # ALTQ, required for PF options ALTQ # Basic ALTQ support options ALTQ_CBQ # Class Based Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable #options ALTQ_DEBUG # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options BREAK_TO_DEBUGGER options ALT_BREAK_TO_DEBUGGER options DDB options KDB #options DIAGNOSTIC #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB # Enable these options for nfs root configured via BOOTP. options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options BOOTP #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=mge0 # If not using BOOTP, use something like one of these... #options ROOTDEVNAME=\"ufs:/dev/da1a\" options ROOTDEVNAME=\"ufs:/dev/da1s1a\" #options ROOTDEVNAME=\"ufs:/dev/da1p10\" #options ROOTDEVNAME=\"nfs:192.168.0.254/dreamplug\" # To use this configuration with the (rare) model 1001N (nand flash), # create a kernel config file that looks like this: # # include DREAMPLUG-1001 # nomakeoptions FDT_DTS_FILE # makeoptions FDT_DTS_FILE=dreamplug-1001N.dts # device nand Index: stable/10/sys/arm/conf/EFIKA_MX =================================================================== --- stable/10/sys/arm/conf/EFIKA_MX (revision 287081) +++ stable/10/sys/arm/conf/EFIKA_MX (revision 287082) @@ -1,193 +1,193 @@ # # Kernel configuration for Efika MX Smarttop/Smartbook boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident EFIKA_MX include "../freescale/imx/std.imx51" makeoptions WITHOUT_MODULES="ahc" options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS #options MD_ROOT # MD is a potential root device options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options INCLUDE_CONFIG_FILE # Include this file in kernel options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options BREAK_TO_DEBUGGER +options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options GDB # Support remote GDB options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 options ROOTDEVNAME=\"ufs:ada0s2a\" # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # Debugging support. Always need this: options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: options DDB # Support DDB. #options GDB # Support remote GDB. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER device ata device atapci # Only for helper functions device imxata options ATA_STATIC_ID # Static device numbering device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB Ethernet, requires miibus device miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=efikamx.dts # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support device sc device kbdmux options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 device ukbd # Allow keyboard like HIDs to control console device ums Index: stable/10/sys/arm/conf/EXYNOS5.common =================================================================== --- stable/10/sys/arm/conf/EXYNOS5.common (revision 287081) +++ stable/10/sys/arm/conf/EXYNOS5.common (revision 287082) @@ -1,131 +1,131 @@ # # Kernel configuration for Samsung Exynos 5 SoC. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ makeoptions WERROR="-Werror" options HZ=100 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options BREAK_TO_DEBUGGER +options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 options ROOTDEVNAME=\"ufs:/dev/da0\" # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device ehci #device ohci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs # Serial ports device uart # I2C (TWSI) device iic device iicbus # Ethernet device ether device mii device smsc device smscphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter Index: stable/10/sys/arm/conf/PANDABOARD =================================================================== --- stable/10/sys/arm/conf/PANDABOARD (revision 287081) +++ stable/10/sys/arm/conf/PANDABOARD (revision 287082) @@ -1,154 +1,154 @@ # # PANDABOARD -- Custom configuration for the PandaBoard ARM development # platform, check out www.pandaboard.org # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident PANDABOARD # This probably wants to move somewhere else. Maybe we can create a basic # OMAP4340 config, then make a PANDABOARD config that includes the basic one, # adds the start addresses and custom devices plus pulls in this hints file. hints "PANDABOARD.hints" include "../ti/omap4/pandaboard/std.pandaboard" options HZ=100 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options BREAK_TO_DEBUGGER +options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device device pl310 # PL310 L2 cache controller # GPIO device gpio # The following enables MFS as root, this seems similar to an initramfs or initrd # as used in Linux. #options MD_ROOT #options MD_ROOT_SIZE=7560 # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device ohci device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smc device smcphy device bpf # USB Ethernet support, requires miibus device miibus #device axe # ASIX Electronics USB Ethernet device smsc # SMSC LAN95xx USB Ethernet # OMAP-specific devices device ti_sdma device twl device twl_vreg device twl_clks # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=pandaboard.dts Index: stable/10/sys/arm/conf/RPI-B =================================================================== --- stable/10/sys/arm/conf/RPI-B (revision 287081) +++ stable/10/sys/arm/conf/RPI-B (revision 287082) @@ -1,143 +1,142 @@ # # RPI-B -- Custom configuration for the Raspberry Pi # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident RPI-B include "../broadcom/bcm2835/std.rpi" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options BREAK_TO_DEBUGGER options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 #options ROOTDEVNAME=\"ufs:mmcsd0s2\" device bpf device loop device ether device uart device pty device snp device pl011 # Comment following lines for boot console on serial port device vt device kbdmux device ukbd device sdhci device mmc device mmcsd device gpio device gpioled # I2C device iic device iicbus device bcm2835_bsc options KDB options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS device md device random # Entropy device # USB support device usb options USB_DEBUG device dwcotg # DWC OTG controller # USB storage support device scbus device da device umass # USB ethernet support device smcphy device mii device smsc # SPI device spibus device bcm2835_spi # Flattened Device Tree options FDT # Configure using FDT/DTB data # Note: DTB is normally loaded and modified by RPi boot loader, then # handed to kernel via U-Boot and ubldr. #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=rpi.dts makeoptions MODULES_EXTRA=dtb/rpi Index: stable/10/sys/arm/conf/VYBRID =================================================================== --- stable/10/sys/arm/conf/VYBRID (revision 287081) +++ stable/10/sys/arm/conf/VYBRID (revision 287082) @@ -1,154 +1,154 @@ # # Kernel configuration for Vybrid Family boards. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident VYBRID include "../freescale/vybrid/std.vybrid" makeoptions WERROR="-Werror" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options NANDFS # NAND Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support #options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options BREAK_TO_DEBUGGER +options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 #options ROOTDEVNAME=\"nfs:10.5.0.1:/tftpboot/cosmic\" #options ROOTDEVNAME=\"nandfs:/dev/gnand0s.root\" options ROOTDEVNAME=\"ufs:/dev/da0\" options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device ehci #device ohci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs device nand # Serial ports device uart # I2C (TWSI) device iic device iicbus # Ethernet device ether device ffec # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter device sound # Framebuffer device vt device kbdmux options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 device ukbd # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: stable/10/sys/arm/conf/ZEDBOARD =================================================================== --- stable/10/sys/arm/conf/ZEDBOARD (revision 287081) +++ stable/10/sys/arm/conf/ZEDBOARD (revision 287082) @@ -1,114 +1,114 @@ # # ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based # ZedBoard (www.zedboard.org) # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident ZEDBOARD include "../xilinx/zedboard/std.zedboard" options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client #options NFSSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -#options BREAK_TO_DEBUGGER +options ALT_BREAK_TO_DEBUGGER options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 options ROOTDEVNAME=\"ufs:mmcsd0s2a\" device loop device random device ether device cgem # Zynq-7000 gig ethernet device device mii device e1000phy device pty device uart device gpio device md device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci device bpf # Berkeley packet filter # USB support device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device axe # USB-Ethernet # Flattened Device Tree options FDT # Configure using FDT/DTB data #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=zedboard.dts Index: stable/10 =================================================================== --- stable/10 (revision 287081) +++ stable/10 (revision 287082) Property changes on: stable/10 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r283547