Index: head/sys/i386/i386/genassym.c =================================================================== --- head/sys/i386/i386/genassym.c (revision 286287) +++ head/sys/i386/i386/genassym.c (revision 286288) @@ -1,243 +1,244 @@ /*- * Copyright (c) 1982, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)genassym.c 5.11 (Berkeley) 5/10/91 */ #include __FBSDID("$FreeBSD$"); #include "opt_apic.h" #include "opt_compat.h" #include "opt_hwpmc_hooks.h" #include "opt_kstack_pages.h" #include #include #include #include #include #ifdef HWPMC_HOOKS #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DEV_APIC #include #endif #include #include #include #include #include ASSYM(P_VMSPACE, offsetof(struct proc, p_vmspace)); ASSYM(VM_PMAP, offsetof(struct vmspace, vm_pmap)); ASSYM(PM_ACTIVE, offsetof(struct pmap, pm_active)); ASSYM(TD_FLAGS, offsetof(struct thread, td_flags)); ASSYM(TD_LOCK, offsetof(struct thread, td_lock)); ASSYM(TD_PCB, offsetof(struct thread, td_pcb)); ASSYM(TD_PFLAGS, offsetof(struct thread, td_pflags)); ASSYM(TD_PROC, offsetof(struct thread, td_proc)); ASSYM(TD_MD, offsetof(struct thread, td_md)); ASSYM(TD_TID, offsetof(struct thread, td_tid)); ASSYM(TDP_CALLCHAIN, TDP_CALLCHAIN); ASSYM(P_MD, offsetof(struct proc, p_md)); ASSYM(MD_LDT, offsetof(struct mdproc, md_ldt)); ASSYM(TDF_ASTPENDING, TDF_ASTPENDING); ASSYM(TDF_NEEDRESCHED, TDF_NEEDRESCHED); ASSYM(V_TRAP, offsetof(struct vmmeter, v_trap)); ASSYM(V_SYSCALL, offsetof(struct vmmeter, v_syscall)); ASSYM(V_INTR, offsetof(struct vmmeter, v_intr)); /* ASSYM(UPAGES, UPAGES);*/ ASSYM(KSTACK_PAGES, KSTACK_PAGES); +ASSYM(TD0_KSTACK_PAGES, TD0_KSTACK_PAGES); ASSYM(PAGE_SIZE, PAGE_SIZE); ASSYM(NPTEPG, NPTEPG); ASSYM(NPDEPG, NPDEPG); ASSYM(NPDEPTD, NPDEPTD); ASSYM(NPGPTD, NPGPTD); ASSYM(PDESIZE, sizeof(pd_entry_t)); ASSYM(PTESIZE, sizeof(pt_entry_t)); ASSYM(PDESHIFT, PDESHIFT); ASSYM(PTESHIFT, PTESHIFT); ASSYM(PAGE_SHIFT, PAGE_SHIFT); ASSYM(PAGE_MASK, PAGE_MASK); ASSYM(PDRSHIFT, PDRSHIFT); ASSYM(PDRMASK, PDRMASK); ASSYM(USRSTACK, USRSTACK); ASSYM(VM_MAXUSER_ADDRESS, VM_MAXUSER_ADDRESS); ASSYM(KERNBASE, KERNBASE); ASSYM(KERNLOAD, KERNLOAD); ASSYM(MCLBYTES, MCLBYTES); ASSYM(PCB_CR0, offsetof(struct pcb, pcb_cr0)); ASSYM(PCB_CR2, offsetof(struct pcb, pcb_cr2)); ASSYM(PCB_CR3, offsetof(struct pcb, pcb_cr3)); ASSYM(PCB_CR4, offsetof(struct pcb, pcb_cr4)); ASSYM(PCB_EDI, offsetof(struct pcb, pcb_edi)); ASSYM(PCB_ESI, offsetof(struct pcb, pcb_esi)); ASSYM(PCB_EBP, offsetof(struct pcb, pcb_ebp)); ASSYM(PCB_ESP, offsetof(struct pcb, pcb_esp)); ASSYM(PCB_EBX, offsetof(struct pcb, pcb_ebx)); ASSYM(PCB_EIP, offsetof(struct pcb, pcb_eip)); ASSYM(TSS_ESP0, offsetof(struct i386tss, tss_esp0)); ASSYM(PCB_DS, offsetof(struct pcb, pcb_ds)); ASSYM(PCB_ES, offsetof(struct pcb, pcb_es)); ASSYM(PCB_FS, offsetof(struct pcb, pcb_fs)); ASSYM(PCB_GS, offsetof(struct pcb, pcb_gs)); ASSYM(PCB_SS, offsetof(struct pcb, pcb_ss)); ASSYM(PCB_DR0, offsetof(struct pcb, pcb_dr0)); ASSYM(PCB_DR1, offsetof(struct pcb, pcb_dr1)); ASSYM(PCB_DR2, offsetof(struct pcb, pcb_dr2)); ASSYM(PCB_DR3, offsetof(struct pcb, pcb_dr3)); ASSYM(PCB_DR6, offsetof(struct pcb, pcb_dr6)); ASSYM(PCB_DR7, offsetof(struct pcb, pcb_dr7)); ASSYM(PCB_PSL, offsetof(struct pcb, pcb_psl)); ASSYM(PCB_DBREGS, PCB_DBREGS); ASSYM(PCB_EXT, offsetof(struct pcb, pcb_ext)); ASSYM(PCB_FSD, offsetof(struct pcb, pcb_fsd)); ASSYM(PCB_GSD, offsetof(struct pcb, pcb_gsd)); ASSYM(PCB_VM86, offsetof(struct pcb, pcb_vm86)); ASSYM(PCB_FLAGS, offsetof(struct pcb, pcb_flags)); ASSYM(PCB_SAVEFPU, offsetof(struct pcb, pcb_save)); ASSYM(PCB_ONFAULT, offsetof(struct pcb, pcb_onfault)); ASSYM(PCB_SIZE, sizeof(struct pcb)); ASSYM(PCB_VM86CALL, PCB_VM86CALL); ASSYM(PCB_GDT, offsetof(struct pcb, pcb_gdt)); ASSYM(PCB_IDT, offsetof(struct pcb, pcb_idt)); ASSYM(PCB_LDT, offsetof(struct pcb, pcb_ldt)); ASSYM(PCB_TR, offsetof(struct pcb, pcb_tr)); ASSYM(TF_TRAPNO, offsetof(struct trapframe, tf_trapno)); ASSYM(TF_ERR, offsetof(struct trapframe, tf_err)); ASSYM(TF_EIP, offsetof(struct trapframe, tf_eip)); ASSYM(TF_CS, offsetof(struct trapframe, tf_cs)); ASSYM(TF_EFLAGS, offsetof(struct trapframe, tf_eflags)); ASSYM(SIGF_HANDLER, offsetof(struct sigframe, sf_ahu.sf_handler)); #ifdef COMPAT_43 ASSYM(SIGF_SC, offsetof(struct osigframe, sf_siginfo.si_sc)); #endif ASSYM(SIGF_UC, offsetof(struct sigframe, sf_uc)); #ifdef COMPAT_FREEBSD4 ASSYM(SIGF_UC4, offsetof(struct sigframe4, sf_uc)); #endif #ifdef COMPAT_43 ASSYM(SC_PS, offsetof(struct osigcontext, sc_ps)); ASSYM(SC_FS, offsetof(struct osigcontext, sc_fs)); ASSYM(SC_GS, offsetof(struct osigcontext, sc_gs)); ASSYM(SC_TRAPNO, offsetof(struct osigcontext, sc_trapno)); #endif #ifdef COMPAT_FREEBSD4 ASSYM(UC4_EFLAGS, offsetof(struct ucontext4, uc_mcontext.mc_eflags)); ASSYM(UC4_GS, offsetof(struct ucontext4, uc_mcontext.mc_gs)); #endif ASSYM(UC_EFLAGS, offsetof(ucontext_t, uc_mcontext.mc_eflags)); ASSYM(UC_GS, offsetof(ucontext_t, uc_mcontext.mc_gs)); ASSYM(ENOENT, ENOENT); ASSYM(EFAULT, EFAULT); ASSYM(ENAMETOOLONG, ENAMETOOLONG); ASSYM(MAXCOMLEN, MAXCOMLEN); ASSYM(MAXPATHLEN, MAXPATHLEN); ASSYM(BOOTINFO_SIZE, sizeof(struct bootinfo)); ASSYM(BI_VERSION, offsetof(struct bootinfo, bi_version)); ASSYM(BI_KERNELNAME, offsetof(struct bootinfo, bi_kernelname)); ASSYM(BI_NFS_DISKLESS, offsetof(struct bootinfo, bi_nfs_diskless)); ASSYM(BI_ENDCOMMON, offsetof(struct bootinfo, bi_endcommon)); ASSYM(NFSDISKLESS_SIZE, sizeof(struct nfs_diskless)); ASSYM(BI_SIZE, offsetof(struct bootinfo, bi_size)); ASSYM(BI_SYMTAB, offsetof(struct bootinfo, bi_symtab)); ASSYM(BI_ESYMTAB, offsetof(struct bootinfo, bi_esymtab)); ASSYM(BI_KERNEND, offsetof(struct bootinfo, bi_kernend)); ASSYM(PC_SIZEOF, sizeof(struct pcpu)); ASSYM(PC_PRVSPACE, offsetof(struct pcpu, pc_prvspace)); ASSYM(PC_CURTHREAD, offsetof(struct pcpu, pc_curthread)); ASSYM(PC_FPCURTHREAD, offsetof(struct pcpu, pc_fpcurthread)); ASSYM(PC_IDLETHREAD, offsetof(struct pcpu, pc_idlethread)); ASSYM(PC_CURPCB, offsetof(struct pcpu, pc_curpcb)); ASSYM(PC_COMMON_TSS, offsetof(struct pcpu, pc_common_tss)); ASSYM(PC_COMMON_TSSD, offsetof(struct pcpu, pc_common_tssd)); ASSYM(PC_TSS_GDT, offsetof(struct pcpu, pc_tss_gdt)); ASSYM(PC_FSGS_GDT, offsetof(struct pcpu, pc_fsgs_gdt)); ASSYM(PC_CURRENTLDT, offsetof(struct pcpu, pc_currentldt)); ASSYM(PC_CPUID, offsetof(struct pcpu, pc_cpuid)); ASSYM(PC_CURPMAP, offsetof(struct pcpu, pc_curpmap)); ASSYM(PC_PRIVATE_TSS, offsetof(struct pcpu, pc_private_tss)); #ifdef DEV_APIC ASSYM(LA_EOI, LAPIC_EOI * LAPIC_MEM_MUL); ASSYM(LA_ISR, LAPIC_ISR0 * LAPIC_MEM_MUL); #endif ASSYM(KCSEL, GSEL(GCODE_SEL, SEL_KPL)); ASSYM(KDSEL, GSEL(GDATA_SEL, SEL_KPL)); ASSYM(KPSEL, GSEL(GPRIV_SEL, SEL_KPL)); ASSYM(BC32SEL, GSEL(GBIOSCODE32_SEL, SEL_KPL)); ASSYM(GPROC0_SEL, GPROC0_SEL); ASSYM(VM86_FRAMESIZE, sizeof(struct vm86frame)); #ifdef PC98 #include ASSYM(BUS_SPACE_HANDLE_BASE, offsetof(struct bus_space_handle, bsh_base)); ASSYM(BUS_SPACE_HANDLE_IAT, offsetof(struct bus_space_handle, bsh_iat)); #endif #ifdef HWPMC_HOOKS ASSYM(PMC_FN_USER_CALLCHAIN, PMC_FN_USER_CALLCHAIN); #endif Index: head/sys/i386/i386/locore.s =================================================================== --- head/sys/i386/i386/locore.s (revision 286287) +++ head/sys/i386/i386/locore.s (revision 286288) @@ -1,909 +1,909 @@ /*- * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)locore.s 7.3 (Berkeley) 5/13/91 * $FreeBSD$ * * originally from: locore.s, by William F. Jolitz * * Substantially rewritten by David Greenman, Rod Grimes, * Bruce Evans, Wolfgang Solfrank, Poul-Henning Kamp * and many others. */ #include "opt_bootp.h" #include "opt_compat.h" #include "opt_nfsroot.h" #include "opt_pmap.h" #include #include #include #include #include #include #include #include "assym.s" /* * XXX * * Note: This version greatly munged to avoid various assembler errors * that may be fixed in newer versions of gas. Perhaps newer versions * will have more pleasant appearance. */ /* * PTmap is recursive pagemap at top of virtual address space. * Within PTmap, the page directory can be found (third indirection). */ .globl PTmap,PTD,PTDpde .set PTmap,(PTDPTDI << PDRSHIFT) .set PTD,PTmap + (PTDPTDI * PAGE_SIZE) .set PTDpde,PTD + (PTDPTDI * PDESIZE) /* * Compiled KERNBASE location and the kernel load address */ .globl kernbase .set kernbase,KERNBASE .globl kernload .set kernload,KERNLOAD /* * Globals */ .data ALIGN_DATA /* just to be sure */ .space 0x2000 /* space for tmpstk - temporary stack */ tmpstk: .globl bootinfo bootinfo: .space BOOTINFO_SIZE /* bootinfo that we can handle */ .globl KERNend KERNend: .long 0 /* phys addr end of kernel (just after bss) */ physfree: .long 0 /* phys addr of next free page */ .globl IdlePTD IdlePTD: .long 0 /* phys addr of kernel PTD */ #if defined(PAE) || defined(PAE_TABLES) .globl IdlePDPT IdlePDPT: .long 0 /* phys addr of kernel PDPT */ #endif .globl KPTmap KPTmap: .long 0 /* address of kernel page tables */ .globl KPTphys KPTphys: .long 0 /* phys addr of kernel page tables */ .globl proc0kstack proc0kstack: .long 0 /* address of proc 0 kstack space */ p0kpa: .long 0 /* phys addr of proc0's STACK */ vm86phystk: .long 0 /* PA of vm86/bios stack */ .globl vm86paddr, vm86pa vm86paddr: .long 0 /* address of vm86 region */ vm86pa: .long 0 /* phys addr of vm86 region */ #ifdef PC98 .globl pc98_system_parameter pc98_system_parameter: .space 0x240 #endif /********************************************************************** * * Some handy macros * */ #define R(foo) ((foo)-KERNBASE) #define ALLOCPAGES(foo) \ movl R(physfree), %esi ; \ movl $((foo)*PAGE_SIZE), %eax ; \ addl %esi, %eax ; \ movl %eax, R(physfree) ; \ movl %esi, %edi ; \ movl $((foo)*PAGE_SIZE),%ecx ; \ xorl %eax,%eax ; \ cld ; \ rep ; \ stosb /* * fillkpt * eax = page frame address * ebx = index into page table * ecx = how many pages to map * base = base address of page dir/table * prot = protection bits */ #define fillkpt(base, prot) \ shll $PTESHIFT,%ebx ; \ addl base,%ebx ; \ orl $PG_V,%eax ; \ orl prot,%eax ; \ 1: movl %eax,(%ebx) ; \ addl $PAGE_SIZE,%eax ; /* increment physical address */ \ addl $PTESIZE,%ebx ; /* next pte */ \ loop 1b /* * fillkptphys(prot) * eax = physical address * ecx = how many pages to map * prot = protection bits */ #define fillkptphys(prot) \ movl %eax, %ebx ; \ shrl $PAGE_SHIFT, %ebx ; \ fillkpt(R(KPTphys), prot) .text /********************************************************************** * * This is where the bootblocks start us, set the ball rolling... * */ NON_GPROF_ENTRY(btext) #ifdef PC98 /* save SYSTEM PARAMETER for resume (NS/T or other) */ movl $0xa1400,%esi movl $R(pc98_system_parameter),%edi movl $0x0240,%ecx cld rep movsb #else /* IBM-PC */ /* Tell the bios to warmboot next time */ movw $0x1234,0x472 #endif /* PC98 */ /* Set up a real frame in case the double return in newboot is executed. */ pushl %ebp movl %esp, %ebp /* Don't trust what the BIOS gives for eflags. */ pushl $PSL_KERNEL popfl /* * Don't trust what the BIOS gives for %fs and %gs. Trust the bootstrap * to set %cs, %ds, %es and %ss. */ mov %ds, %ax mov %ax, %fs mov %ax, %gs /* * Clear the bss. Not all boot programs do it, and it is our job anyway. * * XXX we don't check that there is memory for our bss and page tables * before using it. * * Note: we must be careful to not overwrite an active gdt or idt. They * inactive from now until we switch to new ones, since we don't load any * more segment registers or permit interrupts until after the switch. */ movl $R(end),%ecx movl $R(edata),%edi subl %edi,%ecx xorl %eax,%eax cld rep stosb call recover_bootinfo /* Get onto a stack that we can trust. */ /* * XXX this step is delayed in case recover_bootinfo needs to return via * the old stack, but it need not be, since recover_bootinfo actually * returns via the old frame. */ movl $R(tmpstk),%esp #ifdef PC98 /* pc98_machine_type & M_EPSON_PC98 */ testb $0x02,R(pc98_system_parameter)+220 jz 3f /* epson_machine_id <= 0x0b */ cmpb $0x0b,R(pc98_system_parameter)+224 ja 3f /* count up memory */ movl $0x100000,%eax /* next, talley remaining memory */ movl $0xFFF-0x100,%ecx 1: movl 0(%eax),%ebx /* save location to check */ movl $0xa55a5aa5,0(%eax) /* write test pattern */ cmpl $0xa55a5aa5,0(%eax) /* does not check yet for rollover */ jne 2f movl %ebx,0(%eax) /* restore memory */ addl $PAGE_SIZE,%eax loop 1b 2: subl $0x100000,%eax shrl $17,%eax movb %al,R(pc98_system_parameter)+1 3: movw R(pc98_system_parameter+0x86),%ax movw %ax,R(cpu_id) #endif call identify_cpu call create_pagetables /* * If the CPU has support for VME, turn it on. */ testl $CPUID_VME, R(cpu_feature) jz 1f movl %cr4, %eax orl $CR4_VME, %eax movl %eax, %cr4 1: /* Now enable paging */ #if defined(PAE) || defined(PAE_TABLES) movl R(IdlePDPT), %eax movl %eax, %cr3 movl %cr4, %eax orl $CR4_PAE, %eax movl %eax, %cr4 #else movl R(IdlePTD), %eax movl %eax,%cr3 /* load ptd addr into mmu */ #endif movl %cr0,%eax /* get control word */ orl $CR0_PE|CR0_PG,%eax /* enable paging */ movl %eax,%cr0 /* and let's page NOW! */ pushl $begin /* jump to high virtualized address */ ret /* now running relocated at KERNBASE where the system is linked to run */ begin: /* set up bootstrap stack */ movl proc0kstack,%eax /* location of in-kernel stack */ /* * Only use bottom page for init386(). init386() calculates the * PCB + FPU save area size and returns the true top of stack. */ leal PAGE_SIZE(%eax),%esp xorl %ebp,%ebp /* mark end of frames */ pushl physfree /* value of first for init386(first) */ call init386 /* wire 386 chip for unix operation */ /* * Clean up the stack in a way that db_numargs() understands, so * that backtraces in ddb don't underrun the stack. Traps for * inaccessible memory are more fatal than usual this early. */ addl $4,%esp /* Switch to true top of stack. */ movl %eax,%esp call mi_startup /* autoconfiguration, mountroot etc */ /* NOTREACHED */ addl $0,%esp /* for db_numargs() again */ /* * Signal trampoline, copied to top of user stack */ NON_GPROF_ENTRY(sigcode) calll *SIGF_HANDLER(%esp) leal SIGF_UC(%esp),%eax /* get ucontext */ pushl %eax testl $PSL_VM,UC_EFLAGS(%eax) jne 1f mov UC_GS(%eax),%gs /* restore %gs */ 1: movl $SYS_sigreturn,%eax pushl %eax /* junk to fake return addr. */ int $0x80 /* enter kernel with args */ /* on stack */ 1: jmp 1b #ifdef COMPAT_FREEBSD4 ALIGN_TEXT freebsd4_sigcode: calll *SIGF_HANDLER(%esp) leal SIGF_UC4(%esp),%eax /* get ucontext */ pushl %eax testl $PSL_VM,UC4_EFLAGS(%eax) jne 1f mov UC4_GS(%eax),%gs /* restore %gs */ 1: movl $344,%eax /* 4.x SYS_sigreturn */ pushl %eax /* junk to fake return addr. */ int $0x80 /* enter kernel with args */ /* on stack */ 1: jmp 1b #endif #ifdef COMPAT_43 ALIGN_TEXT osigcode: call *SIGF_HANDLER(%esp) /* call signal handler */ lea SIGF_SC(%esp),%eax /* get sigcontext */ pushl %eax testl $PSL_VM,SC_PS(%eax) jne 9f mov SC_GS(%eax),%gs /* restore %gs */ 9: movl $103,%eax /* 3.x SYS_sigreturn */ pushl %eax /* junk to fake return addr. */ int $0x80 /* enter kernel with args */ 0: jmp 0b #endif /* COMPAT_43 */ ALIGN_TEXT esigcode: .data .globl szsigcode szsigcode: .long esigcode-sigcode #ifdef COMPAT_FREEBSD4 .globl szfreebsd4_sigcode szfreebsd4_sigcode: .long esigcode-freebsd4_sigcode #endif #ifdef COMPAT_43 .globl szosigcode szosigcode: .long esigcode-osigcode #endif .text /********************************************************************** * * Recover the bootinfo passed to us from the boot program * */ recover_bootinfo: /* * This code is called in different ways depending on what loaded * and started the kernel. This is used to detect how we get the * arguments from the other code and what we do with them. * * Old disk boot blocks: * (*btext)(howto, bootdev, cyloffset, esym); * [return address == 0, and can NOT be returned to] * [cyloffset was not supported by the FreeBSD boot code * and always passed in as 0] * [esym is also known as total in the boot code, and * was never properly supported by the FreeBSD boot code] * * Old diskless netboot code: * (*btext)(0,0,0,0,&nfsdiskless,0,0,0); * [return address != 0, and can NOT be returned to] * If we are being booted by this code it will NOT work, * so we are just going to halt if we find this case. * * New uniform boot code: * (*btext)(howto, bootdev, 0, 0, 0, &bootinfo) * [return address != 0, and can be returned to] * * There may seem to be a lot of wasted arguments in here, but * that is so the newer boot code can still load very old kernels * and old boot code can load new kernels. */ /* * The old style disk boot blocks fake a frame on the stack and * did an lret to get here. The frame on the stack has a return * address of 0. */ cmpl $0,4(%ebp) je olddiskboot /* * We have some form of return address, so this is either the * old diskless netboot code, or the new uniform code. That can * be detected by looking at the 5th argument, if it is 0 * we are being booted by the new uniform boot code. */ cmpl $0,24(%ebp) je newboot /* * Seems we have been loaded by the old diskless boot code, we * don't stand a chance of running as the diskless structure * changed considerably between the two, so just halt. */ hlt /* * We have been loaded by the new uniform boot code. * Let's check the bootinfo version, and if we do not understand * it we return to the loader with a status of 1 to indicate this error */ newboot: movl 28(%ebp),%ebx /* &bootinfo.version */ movl BI_VERSION(%ebx),%eax cmpl $1,%eax /* We only understand version 1 */ je 1f movl $1,%eax /* Return status */ leave /* * XXX this returns to our caller's caller (as is required) since * we didn't set up a frame and our caller did. */ ret 1: /* * If we have a kernelname copy it in */ movl BI_KERNELNAME(%ebx),%esi cmpl $0,%esi je 2f /* No kernelname */ movl $MAXPATHLEN,%ecx /* Brute force!!! */ movl $R(kernelname),%edi cmpb $'/',(%esi) /* Make sure it starts with a slash */ je 1f movb $'/',(%edi) incl %edi decl %ecx 1: cld rep movsb 2: /* * Determine the size of the boot loader's copy of the bootinfo * struct. This is impossible to do properly because old versions * of the struct don't contain a size field and there are 2 old * versions with the same version number. */ movl $BI_ENDCOMMON,%ecx /* prepare for sizeless version */ testl $RB_BOOTINFO,8(%ebp) /* bi_size (and bootinfo) valid? */ je got_bi_size /* no, sizeless version */ movl BI_SIZE(%ebx),%ecx got_bi_size: /* * Copy the common part of the bootinfo struct */ movl %ebx,%esi movl $R(bootinfo),%edi cmpl $BOOTINFO_SIZE,%ecx jbe got_common_bi_size movl $BOOTINFO_SIZE,%ecx got_common_bi_size: cld rep movsb #ifdef NFS_ROOT #ifndef BOOTP_NFSV3 /* * If we have a nfs_diskless structure copy it in */ movl BI_NFS_DISKLESS(%ebx),%esi cmpl $0,%esi je olddiskboot movl $R(nfs_diskless),%edi movl $NFSDISKLESS_SIZE,%ecx cld rep movsb movl $R(nfs_diskless_valid),%edi movl $1,(%edi) #endif #endif /* * The old style disk boot. * (*btext)(howto, bootdev, cyloffset, esym); * Note that the newer boot code just falls into here to pick * up howto and bootdev, cyloffset and esym are no longer used */ olddiskboot: movl 8(%ebp),%eax movl %eax,R(boothowto) movl 12(%ebp),%eax movl %eax,R(bootdev) ret /********************************************************************** * * Identify the CPU and initialize anything special about it * */ identify_cpu: /* Try to toggle alignment check flag; does not exist on 386. */ pushfl popl %eax movl %eax,%ecx orl $PSL_AC,%eax pushl %eax popfl pushfl popl %eax xorl %ecx,%eax andl $PSL_AC,%eax pushl %ecx popfl testl %eax,%eax jnz try486 /* NexGen CPU does not have aligment check flag. */ pushfl movl $0x5555, %eax xorl %edx, %edx movl $2, %ecx clc divl %ecx jz trynexgen popfl movl $CPU_386,R(cpu) jmp 3f trynexgen: popfl movl $CPU_NX586,R(cpu) movl $0x4778654e,R(cpu_vendor) # store vendor string movl $0x72446e65,R(cpu_vendor+4) movl $0x6e657669,R(cpu_vendor+8) movl $0,R(cpu_vendor+12) jmp 3f try486: /* Try to toggle identification flag; does not exist on early 486s. */ pushfl popl %eax movl %eax,%ecx xorl $PSL_ID,%eax pushl %eax popfl pushfl popl %eax xorl %ecx,%eax andl $PSL_ID,%eax pushl %ecx popfl testl %eax,%eax jnz trycpuid movl $CPU_486,R(cpu) /* * Check Cyrix CPU * Cyrix CPUs do not change the undefined flags following * execution of the divide instruction which divides 5 by 2. * * Note: CPUID is enabled on M2, so it passes another way. */ pushfl movl $0x5555, %eax xorl %edx, %edx movl $2, %ecx clc divl %ecx jnc trycyrix popfl jmp 3f /* You may use Intel CPU. */ trycyrix: popfl /* * IBM Bluelighting CPU also doesn't change the undefined flags. * Because IBM doesn't disclose the information for Bluelighting * CPU, we couldn't distinguish it from Cyrix's (including IBM * brand of Cyrix CPUs). */ movl $0x69727943,R(cpu_vendor) # store vendor string movl $0x736e4978,R(cpu_vendor+4) movl $0x64616574,R(cpu_vendor+8) jmp 3f trycpuid: /* Use the `cpuid' instruction. */ xorl %eax,%eax cpuid # cpuid 0 movl %eax,R(cpu_high) # highest capability movl %ebx,R(cpu_vendor) # store vendor string movl %edx,R(cpu_vendor+4) movl %ecx,R(cpu_vendor+8) movb $0,R(cpu_vendor+12) movl $1,%eax cpuid # cpuid 1 movl %eax,R(cpu_id) # store cpu_id movl %ebx,R(cpu_procinfo) # store cpu_procinfo movl %edx,R(cpu_feature) # store cpu_feature movl %ecx,R(cpu_feature2) # store cpu_feature2 rorl $8,%eax # extract family type andl $15,%eax cmpl $5,%eax jae 1f /* less than Pentium; must be 486 */ movl $CPU_486,R(cpu) jmp 3f 1: /* a Pentium? */ cmpl $5,%eax jne 2f movl $CPU_586,R(cpu) jmp 3f 2: /* Greater than Pentium...call it a Pentium Pro */ movl $CPU_686,R(cpu) 3: ret /********************************************************************** * * Create the first page directory and its page tables. * */ create_pagetables: /* Find end of kernel image (rounded up to a page boundary). */ movl $R(_end),%esi /* Include symbols, if any. */ movl R(bootinfo+BI_ESYMTAB),%edi testl %edi,%edi je over_symalloc movl %edi,%esi movl $KERNBASE,%edi addl %edi,R(bootinfo+BI_SYMTAB) addl %edi,R(bootinfo+BI_ESYMTAB) over_symalloc: /* If we are told where the end of the kernel space is, believe it. */ movl R(bootinfo+BI_KERNEND),%edi testl %edi,%edi je no_kernend movl %edi,%esi no_kernend: addl $PDRMASK,%esi /* Play conservative for now, and */ andl $~PDRMASK,%esi /* ... wrap to next 4M. */ movl %esi,R(KERNend) /* save end of kernel */ movl %esi,R(physfree) /* next free page is at end of kernel */ /* Allocate Kernel Page Tables */ ALLOCPAGES(NKPT) movl %esi,R(KPTphys) addl $(KERNBASE-(KPTDI<<(PDRSHIFT-PAGE_SHIFT+PTESHIFT))),%esi movl %esi,R(KPTmap) /* Allocate Page Table Directory */ #if defined(PAE) || defined(PAE_TABLES) /* XXX only need 32 bytes (easier for now) */ ALLOCPAGES(1) movl %esi,R(IdlePDPT) #endif ALLOCPAGES(NPGPTD) movl %esi,R(IdlePTD) /* Allocate KSTACK */ - ALLOCPAGES(KSTACK_PAGES) + ALLOCPAGES(TD0_KSTACK_PAGES) movl %esi,R(p0kpa) addl $KERNBASE, %esi movl %esi, R(proc0kstack) ALLOCPAGES(1) /* vm86/bios stack */ movl %esi,R(vm86phystk) ALLOCPAGES(3) /* pgtable + ext + IOPAGES */ movl %esi,R(vm86pa) addl $KERNBASE, %esi movl %esi, R(vm86paddr) /* * Enable PSE and PGE. */ #ifndef DISABLE_PSE testl $CPUID_PSE, R(cpu_feature) jz 1f movl $PG_PS, R(pseflag) movl %cr4, %eax orl $CR4_PSE, %eax movl %eax, %cr4 1: #endif #ifndef DISABLE_PG_G testl $CPUID_PGE, R(cpu_feature) jz 2f movl $PG_G, R(pgeflag) movl %cr4, %eax orl $CR4_PGE, %eax movl %eax, %cr4 2: #endif /* * Initialize page table pages mapping physical address zero through the * end of the kernel. All of the page table entries allow read and write * access. Write access to the first physical page is required by bios32 * calls, and write access to the first 1 MB of physical memory is required * by ACPI for implementing suspend and resume. We do this even * if we've enabled PSE above, we'll just switch the corresponding kernel * PDEs before we turn on paging. * * XXX: We waste some pages here in the PSE case! */ xorl %eax, %eax movl R(KERNend),%ecx shrl $PAGE_SHIFT,%ecx fillkptphys($PG_RW) /* Map page table pages. */ movl R(KPTphys),%eax movl $NKPT,%ecx fillkptphys($PG_RW) /* Map page directory. */ #if defined(PAE) || defined(PAE_TABLES) movl R(IdlePDPT), %eax movl $1, %ecx fillkptphys($PG_RW) #endif movl R(IdlePTD), %eax movl $NPGPTD, %ecx fillkptphys($PG_RW) /* Map proc0's KSTACK in the physical way ... */ movl R(p0kpa), %eax - movl $(KSTACK_PAGES), %ecx + movl $(TD0_KSTACK_PAGES), %ecx fillkptphys($PG_RW) /* Map ISA hole */ movl $ISA_HOLE_START, %eax movl $ISA_HOLE_LENGTH>>PAGE_SHIFT, %ecx fillkptphys($PG_RW) /* Map space for the vm86 region */ movl R(vm86phystk), %eax movl $4, %ecx fillkptphys($PG_RW) /* Map page 0 into the vm86 page table */ movl $0, %eax movl $0, %ebx movl $1, %ecx fillkpt(R(vm86pa), $PG_RW|PG_U) /* ...likewise for the ISA hole */ movl $ISA_HOLE_START, %eax movl $ISA_HOLE_START>>PAGE_SHIFT, %ebx movl $ISA_HOLE_LENGTH>>PAGE_SHIFT, %ecx fillkpt(R(vm86pa), $PG_RW|PG_U) /* * Create an identity mapping for low physical memory, including the kernel. * The part of this mapping that covers the first 1 MB of physical memory * becomes a permanent part of the kernel's address space. The rest of this * mapping is destroyed in pmap_bootstrap(). Ordinarily, the same page table * pages are shared by the identity mapping and the kernel's native mapping. * However, the permanent identity mapping cannot contain PG_G mappings. * Thus, if the kernel is loaded within the permanent identity mapping, that * page table page must be duplicated and not shared. * * N.B. Due to errata concerning large pages and physical address zero, * a PG_PS mapping is not used. */ movl R(KPTphys), %eax xorl %ebx, %ebx movl $NKPT, %ecx fillkpt(R(IdlePTD), $PG_RW) #if KERNLOAD < (1 << PDRSHIFT) testl $PG_G, R(pgeflag) jz 1f ALLOCPAGES(1) movl %esi, %edi movl R(IdlePTD), %eax movl (%eax), %esi movl %edi, (%eax) movl $PAGE_SIZE, %ecx cld rep movsb 1: #endif /* * For the non-PSE case, install PDEs for PTs covering the KVA. * For the PSE case, do the same, but clobber the ones corresponding * to the kernel (from btext to KERNend) with 4M (2M for PAE) ('PS') * PDEs immediately after. */ movl R(KPTphys), %eax movl $KPTDI, %ebx movl $NKPT, %ecx fillkpt(R(IdlePTD), $PG_RW) cmpl $0,R(pseflag) je done_pde movl R(KERNend), %ecx movl $KERNLOAD, %eax subl %eax, %ecx shrl $PDRSHIFT, %ecx movl $(KPTDI+(KERNLOAD/(1 << PDRSHIFT))), %ebx shll $PDESHIFT, %ebx addl R(IdlePTD), %ebx orl $(PG_V|PG_RW|PG_PS), %eax 1: movl %eax, (%ebx) addl $(1 << PDRSHIFT), %eax addl $PDESIZE, %ebx loop 1b done_pde: /* install a pde recursively mapping page directory as a page table */ movl R(IdlePTD), %eax movl $PTDPTDI, %ebx movl $NPGPTD,%ecx fillkpt(R(IdlePTD), $PG_RW) #if defined(PAE) || defined(PAE_TABLES) movl R(IdlePTD), %eax xorl %ebx, %ebx movl $NPGPTD, %ecx fillkpt(R(IdlePDPT), $0x0) #endif ret #ifdef XENHVM /* Xen Hypercall page */ .text .p2align PAGE_SHIFT, 0x90 /* Hypercall_page needs to be PAGE aligned */ NON_GPROF_ENTRY(hypercall_page) .skip 0x1000, 0x90 /* Fill with "nop"s */ #endif Index: head/sys/i386/i386/machdep.c =================================================================== --- head/sys/i386/i386/machdep.c (revision 286287) +++ head/sys/i386/i386/machdep.c (revision 286288) @@ -1,3408 +1,3408 @@ /*- * Copyright (c) 1992 Terrence R. Lambert. * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 */ #include __FBSDID("$FreeBSD$"); #include "opt_apic.h" #include "opt_atpic.h" #include "opt_compat.h" #include "opt_cpu.h" #include "opt_ddb.h" #include "opt_inet.h" #include "opt_isa.h" #include "opt_kstack_pages.h" #include "opt_maxmem.h" #include "opt_mp_watchdog.h" #include "opt_npx.h" #include "opt_perfmon.h" #include "opt_platform.h" #include "opt_xbox.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef SMP #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #ifndef KDB #error KDB must be enabled in order for DDB to work! #endif #include #include #endif #ifdef PC98 #include #else #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef PERFMON #include #endif #ifdef SMP #include #endif #ifdef FDT #include #endif #ifdef DEV_APIC #include #endif #ifdef DEV_ISA #include #endif #ifdef XBOX #include int arch_i386_is_xbox = 0; uint32_t arch_i386_xbox_memsize = 0; #endif /* Sanity check for __curthread() */ CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); extern register_t init386(int first); extern void dblfault_handler(void); #if !defined(CPU_DISABLE_SSE) && defined(I686_CPU) #define CPU_ENABLE_SSE #endif static void cpu_startup(void *); static void fpstate_drop(struct thread *td); static void get_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpusave, size_t xfpusave_len); static int set_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpustate, size_t xfpustate_len); SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL); /* Intel ICH registers */ #define ICH_PMBASE 0x400 #define ICH_SMI_EN ICH_PMBASE + 0x30 int _udatasel, _ucodesel; u_int basemem; #ifdef PC98 int need_pre_dma_flush; /* If 1, use wbinvd befor DMA transfer. */ int need_post_dma_flush; /* If 1, use invd after DMA transfer. */ static int ispc98 = 1; SYSCTL_INT(_machdep, OID_AUTO, ispc98, CTLFLAG_RD, &ispc98, 0, ""); #endif int cold = 1; #ifdef COMPAT_43 static void osendsig(sig_t catcher, ksiginfo_t *, sigset_t *mask); #endif #ifdef COMPAT_FREEBSD4 static void freebsd4_sendsig(sig_t catcher, ksiginfo_t *, sigset_t *mask); #endif long Maxmem = 0; long realmem = 0; #ifdef PAE FEATURE(pae, "Physical Address Extensions"); #endif /* * The number of PHYSMAP entries must be one less than the number of * PHYSSEG entries because the PHYSMAP entry that spans the largest * physical address that is accessible by ISA DMA is split into two * PHYSSEG entries. */ #define PHYSMAP_SIZE (2 * (VM_PHYSSEG_MAX - 1)) vm_paddr_t phys_avail[PHYSMAP_SIZE + 2]; vm_paddr_t dump_avail[PHYSMAP_SIZE + 2]; /* must be 2 less so 0 0 can signal end of chunks */ #define PHYS_AVAIL_ARRAY_END ((sizeof(phys_avail) / sizeof(phys_avail[0])) - 2) #define DUMP_AVAIL_ARRAY_END ((sizeof(dump_avail) / sizeof(dump_avail[0])) - 2) struct kva_md_info kmi; static struct trapframe proc0_tf; struct pcpu __pcpu[MAXCPU]; struct mtx icu_lock; struct mem_range_softc mem_range_softc; /* Default init_ops implementation. */ struct init_ops init_ops = { .early_clock_source_init = i8254_init, .early_delay = i8254_delay, #ifdef DEV_APIC .msi_init = msi_init, #endif }; static void cpu_startup(dummy) void *dummy; { uintmax_t memsize; char *sysenv; #ifndef PC98 /* * On MacBooks, we need to disallow the legacy USB circuit to * generate an SMI# because this can cause several problems, * namely: incorrect CPU frequency detection and failure to * start the APs. * We do this by disabling a bit in the SMI_EN (SMI Control and * Enable register) of the Intel ICH LPC Interface Bridge. */ sysenv = kern_getenv("smbios.system.product"); if (sysenv != NULL) { if (strncmp(sysenv, "MacBook1,1", 10) == 0 || strncmp(sysenv, "MacBook3,1", 10) == 0 || strncmp(sysenv, "MacBook4,1", 10) == 0 || strncmp(sysenv, "MacBookPro1,1", 13) == 0 || strncmp(sysenv, "MacBookPro1,2", 13) == 0 || strncmp(sysenv, "MacBookPro3,1", 13) == 0 || strncmp(sysenv, "MacBookPro4,1", 13) == 0 || strncmp(sysenv, "Macmini1,1", 10) == 0) { if (bootverbose) printf("Disabling LEGACY_USB_EN bit on " "Intel ICH.\n"); outl(ICH_SMI_EN, inl(ICH_SMI_EN) & ~0x8); } freeenv(sysenv); } #endif /* !PC98 */ /* * Good {morning,afternoon,evening,night}. */ startrtclock(); printcpuinfo(); panicifcpuunsupported(); #ifdef PERFMON perfmon_init(); #endif /* * Display physical memory if SMBIOS reports reasonable amount. */ memsize = 0; sysenv = kern_getenv("smbios.memory.enabled"); if (sysenv != NULL) { memsize = (uintmax_t)strtoul(sysenv, (char **)NULL, 10) << 10; freeenv(sysenv); } if (memsize < ptoa((uintmax_t)vm_cnt.v_free_count)) memsize = ptoa((uintmax_t)Maxmem); printf("real memory = %ju (%ju MB)\n", memsize, memsize >> 20); realmem = atop(memsize); /* * Display any holes after the first chunk of extended memory. */ if (bootverbose) { int indx; printf("Physical memory chunk(s):\n"); for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { vm_paddr_t size; size = phys_avail[indx + 1] - phys_avail[indx]; printf( "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", (uintmax_t)phys_avail[indx], (uintmax_t)phys_avail[indx + 1] - 1, (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); } } vm_ksubmap_init(&kmi); printf("avail memory = %ju (%ju MB)\n", ptoa((uintmax_t)vm_cnt.v_free_count), ptoa((uintmax_t)vm_cnt.v_free_count) / 1048576); /* * Set up buffers, so they can be used to read disk labels. */ bufinit(); vm_pager_bufferinit(); cpu_setregs(); } /* * Send an interrupt to process. * * Stack is set up to allow sigcode stored * at top to call routine, followed by call * to sigreturn routine below. After sigreturn * resets the signal mask, the stack, and the * frame pointer, it returns to the user * specified pc, psl. */ #ifdef COMPAT_43 static void osendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) { struct osigframe sf, *fp; struct proc *p; struct thread *td; struct sigacts *psp; struct trapframe *regs; int sig; int oonstack; td = curthread; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); sig = ksi->ksi_signo; psp = p->p_sigacts; mtx_assert(&psp->ps_mtx, MA_OWNED); regs = td->td_frame; oonstack = sigonstack(regs->tf_esp); /* Allocate space for the signal handler context. */ if ((td->td_pflags & TDP_ALTSTACK) && !oonstack && SIGISMEMBER(psp->ps_sigonstack, sig)) { fp = (struct osigframe *)(td->td_sigstk.ss_sp + td->td_sigstk.ss_size - sizeof(struct osigframe)); #if defined(COMPAT_43) td->td_sigstk.ss_flags |= SS_ONSTACK; #endif } else fp = (struct osigframe *)regs->tf_esp - 1; /* Build the argument list for the signal handler. */ sf.sf_signum = sig; sf.sf_scp = (register_t)&fp->sf_siginfo.si_sc; bzero(&sf.sf_siginfo, sizeof(sf.sf_siginfo)); if (SIGISMEMBER(psp->ps_siginfo, sig)) { /* Signal handler installed with SA_SIGINFO. */ sf.sf_arg2 = (register_t)&fp->sf_siginfo; sf.sf_siginfo.si_signo = sig; sf.sf_siginfo.si_code = ksi->ksi_code; sf.sf_ahu.sf_action = (__osiginfohandler_t *)catcher; sf.sf_addr = 0; } else { /* Old FreeBSD-style arguments. */ sf.sf_arg2 = ksi->ksi_code; sf.sf_addr = (register_t)ksi->ksi_addr; sf.sf_ahu.sf_handler = catcher; } mtx_unlock(&psp->ps_mtx); PROC_UNLOCK(p); /* Save most if not all of trap frame. */ sf.sf_siginfo.si_sc.sc_eax = regs->tf_eax; sf.sf_siginfo.si_sc.sc_ebx = regs->tf_ebx; sf.sf_siginfo.si_sc.sc_ecx = regs->tf_ecx; sf.sf_siginfo.si_sc.sc_edx = regs->tf_edx; sf.sf_siginfo.si_sc.sc_esi = regs->tf_esi; sf.sf_siginfo.si_sc.sc_edi = regs->tf_edi; sf.sf_siginfo.si_sc.sc_cs = regs->tf_cs; sf.sf_siginfo.si_sc.sc_ds = regs->tf_ds; sf.sf_siginfo.si_sc.sc_ss = regs->tf_ss; sf.sf_siginfo.si_sc.sc_es = regs->tf_es; sf.sf_siginfo.si_sc.sc_fs = regs->tf_fs; sf.sf_siginfo.si_sc.sc_gs = rgs(); sf.sf_siginfo.si_sc.sc_isp = regs->tf_isp; /* Build the signal context to be used by osigreturn(). */ sf.sf_siginfo.si_sc.sc_onstack = (oonstack) ? 1 : 0; SIG2OSIG(*mask, sf.sf_siginfo.si_sc.sc_mask); sf.sf_siginfo.si_sc.sc_sp = regs->tf_esp; sf.sf_siginfo.si_sc.sc_fp = regs->tf_ebp; sf.sf_siginfo.si_sc.sc_pc = regs->tf_eip; sf.sf_siginfo.si_sc.sc_ps = regs->tf_eflags; sf.sf_siginfo.si_sc.sc_trapno = regs->tf_trapno; sf.sf_siginfo.si_sc.sc_err = regs->tf_err; /* * If we're a vm86 process, we want to save the segment registers. * We also change eflags to be our emulated eflags, not the actual * eflags. */ if (regs->tf_eflags & PSL_VM) { /* XXX confusing names: `tf' isn't a trapframe; `regs' is. */ struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86; sf.sf_siginfo.si_sc.sc_gs = tf->tf_vm86_gs; sf.sf_siginfo.si_sc.sc_fs = tf->tf_vm86_fs; sf.sf_siginfo.si_sc.sc_es = tf->tf_vm86_es; sf.sf_siginfo.si_sc.sc_ds = tf->tf_vm86_ds; if (vm86->vm86_has_vme == 0) sf.sf_siginfo.si_sc.sc_ps = (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) | (vm86->vm86_eflags & (PSL_VIF | PSL_VIP)); /* See sendsig() for comments. */ tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP); } /* * Copy the sigframe out to the user's stack. */ if (copyout(&sf, fp, sizeof(*fp)) != 0) { #ifdef DEBUG printf("process %ld has trashed its stack\n", (long)p->p_pid); #endif PROC_LOCK(p); sigexit(td, SIGILL); } regs->tf_esp = (int)fp; if (p->p_sysent->sv_sigcode_base != 0) { regs->tf_eip = p->p_sysent->sv_sigcode_base + szsigcode - szosigcode; } else { /* a.out sysentvec does not use shared page */ regs->tf_eip = p->p_sysent->sv_psstrings - szosigcode; } regs->tf_eflags &= ~(PSL_T | PSL_D); regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; load_gs(_udatasel); regs->tf_ss = _udatasel; PROC_LOCK(p); mtx_lock(&psp->ps_mtx); } #endif /* COMPAT_43 */ #ifdef COMPAT_FREEBSD4 static void freebsd4_sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) { struct sigframe4 sf, *sfp; struct proc *p; struct thread *td; struct sigacts *psp; struct trapframe *regs; int sig; int oonstack; td = curthread; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); sig = ksi->ksi_signo; psp = p->p_sigacts; mtx_assert(&psp->ps_mtx, MA_OWNED); regs = td->td_frame; oonstack = sigonstack(regs->tf_esp); /* Save user context. */ bzero(&sf, sizeof(sf)); sf.sf_uc.uc_sigmask = *mask; sf.sf_uc.uc_stack = td->td_sigstk; sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; sf.sf_uc.uc_mcontext.mc_gs = rgs(); bcopy(regs, &sf.sf_uc.uc_mcontext.mc_fs, sizeof(*regs)); bzero(sf.sf_uc.uc_mcontext.mc_fpregs, sizeof(sf.sf_uc.uc_mcontext.mc_fpregs)); bzero(sf.sf_uc.uc_mcontext.__spare__, sizeof(sf.sf_uc.uc_mcontext.__spare__)); bzero(sf.sf_uc.__spare__, sizeof(sf.sf_uc.__spare__)); /* Allocate space for the signal handler context. */ if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && SIGISMEMBER(psp->ps_sigonstack, sig)) { sfp = (struct sigframe4 *)(td->td_sigstk.ss_sp + td->td_sigstk.ss_size - sizeof(struct sigframe4)); #if defined(COMPAT_43) td->td_sigstk.ss_flags |= SS_ONSTACK; #endif } else sfp = (struct sigframe4 *)regs->tf_esp - 1; /* Build the argument list for the signal handler. */ sf.sf_signum = sig; sf.sf_ucontext = (register_t)&sfp->sf_uc; bzero(&sf.sf_si, sizeof(sf.sf_si)); if (SIGISMEMBER(psp->ps_siginfo, sig)) { /* Signal handler installed with SA_SIGINFO. */ sf.sf_siginfo = (register_t)&sfp->sf_si; sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; /* Fill in POSIX parts */ sf.sf_si.si_signo = sig; sf.sf_si.si_code = ksi->ksi_code; sf.sf_si.si_addr = ksi->ksi_addr; } else { /* Old FreeBSD-style arguments. */ sf.sf_siginfo = ksi->ksi_code; sf.sf_addr = (register_t)ksi->ksi_addr; sf.sf_ahu.sf_handler = catcher; } mtx_unlock(&psp->ps_mtx); PROC_UNLOCK(p); /* * If we're a vm86 process, we want to save the segment registers. * We also change eflags to be our emulated eflags, not the actual * eflags. */ if (regs->tf_eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86; sf.sf_uc.uc_mcontext.mc_gs = tf->tf_vm86_gs; sf.sf_uc.uc_mcontext.mc_fs = tf->tf_vm86_fs; sf.sf_uc.uc_mcontext.mc_es = tf->tf_vm86_es; sf.sf_uc.uc_mcontext.mc_ds = tf->tf_vm86_ds; if (vm86->vm86_has_vme == 0) sf.sf_uc.uc_mcontext.mc_eflags = (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) | (vm86->vm86_eflags & (PSL_VIF | PSL_VIP)); /* * Clear PSL_NT to inhibit T_TSSFLT faults on return from * syscalls made by the signal handler. This just avoids * wasting time for our lazy fixup of such faults. PSL_NT * does nothing in vm86 mode, but vm86 programs can set it * almost legitimately in probes for old cpu types. */ tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP); } /* * Copy the sigframe out to the user's stack. */ if (copyout(&sf, sfp, sizeof(*sfp)) != 0) { #ifdef DEBUG printf("process %ld has trashed its stack\n", (long)p->p_pid); #endif PROC_LOCK(p); sigexit(td, SIGILL); } regs->tf_esp = (int)sfp; regs->tf_eip = p->p_sysent->sv_sigcode_base + szsigcode - szfreebsd4_sigcode; regs->tf_eflags &= ~(PSL_T | PSL_D); regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; regs->tf_ss = _udatasel; PROC_LOCK(p); mtx_lock(&psp->ps_mtx); } #endif /* COMPAT_FREEBSD4 */ void sendsig(sig_t catcher, ksiginfo_t *ksi, sigset_t *mask) { struct sigframe sf, *sfp; struct proc *p; struct thread *td; struct sigacts *psp; char *sp; struct trapframe *regs; struct segment_descriptor *sdp; char *xfpusave; size_t xfpusave_len; int sig; int oonstack; td = curthread; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); sig = ksi->ksi_signo; psp = p->p_sigacts; mtx_assert(&psp->ps_mtx, MA_OWNED); #ifdef COMPAT_FREEBSD4 if (SIGISMEMBER(psp->ps_freebsd4, sig)) { freebsd4_sendsig(catcher, ksi, mask); return; } #endif #ifdef COMPAT_43 if (SIGISMEMBER(psp->ps_osigset, sig)) { osendsig(catcher, ksi, mask); return; } #endif regs = td->td_frame; oonstack = sigonstack(regs->tf_esp); #ifdef CPU_ENABLE_SSE if (cpu_max_ext_state_size > sizeof(union savefpu) && use_xsave) { xfpusave_len = cpu_max_ext_state_size - sizeof(union savefpu); xfpusave = __builtin_alloca(xfpusave_len); } else { #else { #endif xfpusave_len = 0; xfpusave = NULL; } /* Save user context. */ bzero(&sf, sizeof(sf)); sf.sf_uc.uc_sigmask = *mask; sf.sf_uc.uc_stack = td->td_sigstk; sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; sf.sf_uc.uc_mcontext.mc_gs = rgs(); bcopy(regs, &sf.sf_uc.uc_mcontext.mc_fs, sizeof(*regs)); sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext); /* magic */ get_fpcontext(td, &sf.sf_uc.uc_mcontext, xfpusave, xfpusave_len); fpstate_drop(td); /* * Unconditionally fill the fsbase and gsbase into the mcontext. */ sdp = &td->td_pcb->pcb_fsd; sf.sf_uc.uc_mcontext.mc_fsbase = sdp->sd_hibase << 24 | sdp->sd_lobase; sdp = &td->td_pcb->pcb_gsd; sf.sf_uc.uc_mcontext.mc_gsbase = sdp->sd_hibase << 24 | sdp->sd_lobase; bzero(sf.sf_uc.uc_mcontext.mc_spare2, sizeof(sf.sf_uc.uc_mcontext.mc_spare2)); bzero(sf.sf_uc.__spare__, sizeof(sf.sf_uc.__spare__)); /* Allocate space for the signal handler context. */ if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && SIGISMEMBER(psp->ps_sigonstack, sig)) { sp = td->td_sigstk.ss_sp + td->td_sigstk.ss_size; #if defined(COMPAT_43) td->td_sigstk.ss_flags |= SS_ONSTACK; #endif } else sp = (char *)regs->tf_esp - 128; if (xfpusave != NULL) { sp -= xfpusave_len; sp = (char *)((unsigned int)sp & ~0x3F); sf.sf_uc.uc_mcontext.mc_xfpustate = (register_t)sp; } sp -= sizeof(struct sigframe); /* Align to 16 bytes. */ sfp = (struct sigframe *)((unsigned int)sp & ~0xF); /* Translate the signal if appropriate. */ if (p->p_sysent->sv_sigtbl && sig <= p->p_sysent->sv_sigsize) sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)]; /* Build the argument list for the signal handler. */ sf.sf_signum = sig; sf.sf_ucontext = (register_t)&sfp->sf_uc; bzero(&sf.sf_si, sizeof(sf.sf_si)); if (SIGISMEMBER(psp->ps_siginfo, sig)) { /* Signal handler installed with SA_SIGINFO. */ sf.sf_siginfo = (register_t)&sfp->sf_si; sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; /* Fill in POSIX parts */ sf.sf_si = ksi->ksi_info; sf.sf_si.si_signo = sig; /* maybe a translated signal */ } else { /* Old FreeBSD-style arguments. */ sf.sf_siginfo = ksi->ksi_code; sf.sf_addr = (register_t)ksi->ksi_addr; sf.sf_ahu.sf_handler = catcher; } mtx_unlock(&psp->ps_mtx); PROC_UNLOCK(p); /* * If we're a vm86 process, we want to save the segment registers. * We also change eflags to be our emulated eflags, not the actual * eflags. */ if (regs->tf_eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86; sf.sf_uc.uc_mcontext.mc_gs = tf->tf_vm86_gs; sf.sf_uc.uc_mcontext.mc_fs = tf->tf_vm86_fs; sf.sf_uc.uc_mcontext.mc_es = tf->tf_vm86_es; sf.sf_uc.uc_mcontext.mc_ds = tf->tf_vm86_ds; if (vm86->vm86_has_vme == 0) sf.sf_uc.uc_mcontext.mc_eflags = (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) | (vm86->vm86_eflags & (PSL_VIF | PSL_VIP)); /* * Clear PSL_NT to inhibit T_TSSFLT faults on return from * syscalls made by the signal handler. This just avoids * wasting time for our lazy fixup of such faults. PSL_NT * does nothing in vm86 mode, but vm86 programs can set it * almost legitimately in probes for old cpu types. */ tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP); } /* * Copy the sigframe out to the user's stack. */ if (copyout(&sf, sfp, sizeof(*sfp)) != 0 || (xfpusave != NULL && copyout(xfpusave, (void *)sf.sf_uc.uc_mcontext.mc_xfpustate, xfpusave_len) != 0)) { #ifdef DEBUG printf("process %ld has trashed its stack\n", (long)p->p_pid); #endif PROC_LOCK(p); sigexit(td, SIGILL); } regs->tf_esp = (int)sfp; regs->tf_eip = p->p_sysent->sv_sigcode_base; if (regs->tf_eip == 0) regs->tf_eip = p->p_sysent->sv_psstrings - szsigcode; regs->tf_eflags &= ~(PSL_T | PSL_D); regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; regs->tf_ss = _udatasel; PROC_LOCK(p); mtx_lock(&psp->ps_mtx); } /* * System call to cleanup state after a signal * has been taken. Reset signal mask and * stack state from context left by sendsig (above). * Return to previous pc and psl as specified by * context left by sendsig. Check carefully to * make sure that the user has not modified the * state to gain improper privileges. * * MPSAFE */ #ifdef COMPAT_43 int osigreturn(td, uap) struct thread *td; struct osigreturn_args /* { struct osigcontext *sigcntxp; } */ *uap; { struct osigcontext sc; struct trapframe *regs; struct osigcontext *scp; int eflags, error; ksiginfo_t ksi; regs = td->td_frame; error = copyin(uap->sigcntxp, &sc, sizeof(sc)); if (error != 0) return (error); scp = ≻ eflags = scp->sc_ps; if (eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86; /* * if pcb_ext == 0 or vm86_inited == 0, the user hasn't * set up the vm86 area, and we can't enter vm86 mode. */ if (td->td_pcb->pcb_ext == 0) return (EINVAL); vm86 = &td->td_pcb->pcb_ext->ext_vm86; if (vm86->vm86_inited == 0) return (EINVAL); /* Go back to user mode if both flags are set. */ if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) { ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); } if (vm86->vm86_has_vme) { eflags = (tf->tf_eflags & ~VME_USERCHANGE) | (eflags & VME_USERCHANGE) | PSL_VM; } else { vm86->vm86_eflags = eflags; /* save VIF, VIP */ eflags = (tf->tf_eflags & ~VM_USERCHANGE) | (eflags & VM_USERCHANGE) | PSL_VM; } tf->tf_vm86_ds = scp->sc_ds; tf->tf_vm86_es = scp->sc_es; tf->tf_vm86_fs = scp->sc_fs; tf->tf_vm86_gs = scp->sc_gs; tf->tf_ds = _udatasel; tf->tf_es = _udatasel; tf->tf_fs = _udatasel; } else { /* * Don't allow users to change privileged or reserved flags. */ if (!EFL_SECURE(eflags, regs->tf_eflags)) { return (EINVAL); } /* * Don't allow users to load a valid privileged %cs. Let the * hardware check for invalid selectors, excess privilege in * other selectors, invalid %eip's and invalid %esp's. */ if (!CS_SECURE(scp->sc_cs)) { ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_trapno = T_PROTFLT; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); return (EINVAL); } regs->tf_ds = scp->sc_ds; regs->tf_es = scp->sc_es; regs->tf_fs = scp->sc_fs; } /* Restore remaining registers. */ regs->tf_eax = scp->sc_eax; regs->tf_ebx = scp->sc_ebx; regs->tf_ecx = scp->sc_ecx; regs->tf_edx = scp->sc_edx; regs->tf_esi = scp->sc_esi; regs->tf_edi = scp->sc_edi; regs->tf_cs = scp->sc_cs; regs->tf_ss = scp->sc_ss; regs->tf_isp = scp->sc_isp; regs->tf_ebp = scp->sc_fp; regs->tf_esp = scp->sc_sp; regs->tf_eip = scp->sc_pc; regs->tf_eflags = eflags; #if defined(COMPAT_43) if (scp->sc_onstack & 1) td->td_sigstk.ss_flags |= SS_ONSTACK; else td->td_sigstk.ss_flags &= ~SS_ONSTACK; #endif kern_sigprocmask(td, SIG_SETMASK, (sigset_t *)&scp->sc_mask, NULL, SIGPROCMASK_OLD); return (EJUSTRETURN); } #endif /* COMPAT_43 */ #ifdef COMPAT_FREEBSD4 /* * MPSAFE */ int freebsd4_sigreturn(td, uap) struct thread *td; struct freebsd4_sigreturn_args /* { const ucontext4 *sigcntxp; } */ *uap; { struct ucontext4 uc; struct trapframe *regs; struct ucontext4 *ucp; int cs, eflags, error; ksiginfo_t ksi; error = copyin(uap->sigcntxp, &uc, sizeof(uc)); if (error != 0) return (error); ucp = &uc; regs = td->td_frame; eflags = ucp->uc_mcontext.mc_eflags; if (eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86; /* * if pcb_ext == 0 or vm86_inited == 0, the user hasn't * set up the vm86 area, and we can't enter vm86 mode. */ if (td->td_pcb->pcb_ext == 0) return (EINVAL); vm86 = &td->td_pcb->pcb_ext->ext_vm86; if (vm86->vm86_inited == 0) return (EINVAL); /* Go back to user mode if both flags are set. */ if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) { ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); } if (vm86->vm86_has_vme) { eflags = (tf->tf_eflags & ~VME_USERCHANGE) | (eflags & VME_USERCHANGE) | PSL_VM; } else { vm86->vm86_eflags = eflags; /* save VIF, VIP */ eflags = (tf->tf_eflags & ~VM_USERCHANGE) | (eflags & VM_USERCHANGE) | PSL_VM; } bcopy(&ucp->uc_mcontext.mc_fs, tf, sizeof(struct trapframe)); tf->tf_eflags = eflags; tf->tf_vm86_ds = tf->tf_ds; tf->tf_vm86_es = tf->tf_es; tf->tf_vm86_fs = tf->tf_fs; tf->tf_vm86_gs = ucp->uc_mcontext.mc_gs; tf->tf_ds = _udatasel; tf->tf_es = _udatasel; tf->tf_fs = _udatasel; } else { /* * Don't allow users to change privileged or reserved flags. */ if (!EFL_SECURE(eflags, regs->tf_eflags)) { uprintf("pid %d (%s): freebsd4_sigreturn eflags = 0x%x\n", td->td_proc->p_pid, td->td_name, eflags); return (EINVAL); } /* * Don't allow users to load a valid privileged %cs. Let the * hardware check for invalid selectors, excess privilege in * other selectors, invalid %eip's and invalid %esp's. */ cs = ucp->uc_mcontext.mc_cs; if (!CS_SECURE(cs)) { uprintf("pid %d (%s): freebsd4_sigreturn cs = 0x%x\n", td->td_proc->p_pid, td->td_name, cs); ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_trapno = T_PROTFLT; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); return (EINVAL); } bcopy(&ucp->uc_mcontext.mc_fs, regs, sizeof(*regs)); } #if defined(COMPAT_43) if (ucp->uc_mcontext.mc_onstack & 1) td->td_sigstk.ss_flags |= SS_ONSTACK; else td->td_sigstk.ss_flags &= ~SS_ONSTACK; #endif kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0); return (EJUSTRETURN); } #endif /* COMPAT_FREEBSD4 */ /* * MPSAFE */ int sys_sigreturn(td, uap) struct thread *td; struct sigreturn_args /* { const struct __ucontext *sigcntxp; } */ *uap; { ucontext_t uc; struct proc *p; struct trapframe *regs; ucontext_t *ucp; char *xfpustate; size_t xfpustate_len; int cs, eflags, error, ret; ksiginfo_t ksi; p = td->td_proc; error = copyin(uap->sigcntxp, &uc, sizeof(uc)); if (error != 0) return (error); ucp = &uc; if ((ucp->uc_mcontext.mc_flags & ~_MC_FLAG_MASK) != 0) { uprintf("pid %d (%s): sigreturn mc_flags %x\n", p->p_pid, td->td_name, ucp->uc_mcontext.mc_flags); return (EINVAL); } regs = td->td_frame; eflags = ucp->uc_mcontext.mc_eflags; if (eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86; /* * if pcb_ext == 0 or vm86_inited == 0, the user hasn't * set up the vm86 area, and we can't enter vm86 mode. */ if (td->td_pcb->pcb_ext == 0) return (EINVAL); vm86 = &td->td_pcb->pcb_ext->ext_vm86; if (vm86->vm86_inited == 0) return (EINVAL); /* Go back to user mode if both flags are set. */ if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) { ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); } if (vm86->vm86_has_vme) { eflags = (tf->tf_eflags & ~VME_USERCHANGE) | (eflags & VME_USERCHANGE) | PSL_VM; } else { vm86->vm86_eflags = eflags; /* save VIF, VIP */ eflags = (tf->tf_eflags & ~VM_USERCHANGE) | (eflags & VM_USERCHANGE) | PSL_VM; } bcopy(&ucp->uc_mcontext.mc_fs, tf, sizeof(struct trapframe)); tf->tf_eflags = eflags; tf->tf_vm86_ds = tf->tf_ds; tf->tf_vm86_es = tf->tf_es; tf->tf_vm86_fs = tf->tf_fs; tf->tf_vm86_gs = ucp->uc_mcontext.mc_gs; tf->tf_ds = _udatasel; tf->tf_es = _udatasel; tf->tf_fs = _udatasel; } else { /* * Don't allow users to change privileged or reserved flags. */ if (!EFL_SECURE(eflags, regs->tf_eflags)) { uprintf("pid %d (%s): sigreturn eflags = 0x%x\n", td->td_proc->p_pid, td->td_name, eflags); return (EINVAL); } /* * Don't allow users to load a valid privileged %cs. Let the * hardware check for invalid selectors, excess privilege in * other selectors, invalid %eip's and invalid %esp's. */ cs = ucp->uc_mcontext.mc_cs; if (!CS_SECURE(cs)) { uprintf("pid %d (%s): sigreturn cs = 0x%x\n", td->td_proc->p_pid, td->td_name, cs); ksiginfo_init_trap(&ksi); ksi.ksi_signo = SIGBUS; ksi.ksi_code = BUS_OBJERR; ksi.ksi_trapno = T_PROTFLT; ksi.ksi_addr = (void *)regs->tf_eip; trapsignal(td, &ksi); return (EINVAL); } if ((uc.uc_mcontext.mc_flags & _MC_HASFPXSTATE) != 0) { xfpustate_len = uc.uc_mcontext.mc_xfpustate_len; if (xfpustate_len > cpu_max_ext_state_size - sizeof(union savefpu)) { uprintf( "pid %d (%s): sigreturn xfpusave_len = 0x%zx\n", p->p_pid, td->td_name, xfpustate_len); return (EINVAL); } xfpustate = __builtin_alloca(xfpustate_len); error = copyin((const void *)uc.uc_mcontext.mc_xfpustate, xfpustate, xfpustate_len); if (error != 0) { uprintf( "pid %d (%s): sigreturn copying xfpustate failed\n", p->p_pid, td->td_name); return (error); } } else { xfpustate = NULL; xfpustate_len = 0; } ret = set_fpcontext(td, &ucp->uc_mcontext, xfpustate, xfpustate_len); if (ret != 0) return (ret); bcopy(&ucp->uc_mcontext.mc_fs, regs, sizeof(*regs)); } #if defined(COMPAT_43) if (ucp->uc_mcontext.mc_onstack & 1) td->td_sigstk.ss_flags |= SS_ONSTACK; else td->td_sigstk.ss_flags &= ~SS_ONSTACK; #endif kern_sigprocmask(td, SIG_SETMASK, &ucp->uc_sigmask, NULL, 0); return (EJUSTRETURN); } /* * Reset registers to default values on exec. */ void exec_setregs(struct thread *td, struct image_params *imgp, u_long stack) { struct trapframe *regs = td->td_frame; struct pcb *pcb = td->td_pcb; /* Reset pc->pcb_gs and %gs before possibly invalidating it. */ pcb->pcb_gs = _udatasel; load_gs(_udatasel); mtx_lock_spin(&dt_lock); if (td->td_proc->p_md.md_ldt) user_ldt_free(td); else mtx_unlock_spin(&dt_lock); bzero((char *)regs, sizeof(struct trapframe)); regs->tf_eip = imgp->entry_addr; regs->tf_esp = stack; regs->tf_eflags = PSL_USER | (regs->tf_eflags & PSL_T); regs->tf_ss = _udatasel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; regs->tf_cs = _ucodesel; /* PS_STRINGS value for BSD/OS binaries. It is 0 for non-BSD/OS. */ regs->tf_ebx = imgp->ps_strings; /* * Reset the hardware debug registers if they were in use. * They won't have any meaning for the newly exec'd process. */ if (pcb->pcb_flags & PCB_DBREGS) { pcb->pcb_dr0 = 0; pcb->pcb_dr1 = 0; pcb->pcb_dr2 = 0; pcb->pcb_dr3 = 0; pcb->pcb_dr6 = 0; pcb->pcb_dr7 = 0; if (pcb == curpcb) { /* * Clear the debug registers on the running * CPU, otherwise they will end up affecting * the next process we switch to. */ reset_dbregs(); } pcb->pcb_flags &= ~PCB_DBREGS; } pcb->pcb_initial_npxcw = __INITIAL_NPXCW__; /* * Drop the FP state if we hold it, so that the process gets a * clean FP state if it uses the FPU again. */ fpstate_drop(td); /* * XXX - Linux emulator * Make sure sure edx is 0x0 on entry. Linux binaries depend * on it. */ td->td_retval[1] = 0; } void cpu_setregs(void) { unsigned int cr0; cr0 = rcr0(); /* * CR0_MP, CR0_NE and CR0_TS are set for NPX (FPU) support: * * Prepare to trap all ESC (i.e., NPX) instructions and all WAIT * instructions. We must set the CR0_MP bit and use the CR0_TS * bit to control the trap, because setting the CR0_EM bit does * not cause WAIT instructions to trap. It's important to trap * WAIT instructions - otherwise the "wait" variants of no-wait * control instructions would degenerate to the "no-wait" variants * after FP context switches but work correctly otherwise. It's * particularly important to trap WAITs when there is no NPX - * otherwise the "wait" variants would always degenerate. * * Try setting CR0_NE to get correct error reporting on 486DX's. * Setting it should fail or do nothing on lesser processors. */ cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; load_cr0(cr0); load_gs(_udatasel); } u_long bootdev; /* not a struct cdev *- encoding is different */ SYSCTL_ULONG(_machdep, OID_AUTO, guessed_bootdev, CTLFLAG_RD, &bootdev, 0, "Maybe the Boot device (not in struct cdev *format)"); static char bootmethod[16] = "BIOS"; SYSCTL_STRING(_machdep, OID_AUTO, bootmethod, CTLFLAG_RD, bootmethod, 0, "System firmware boot method"); /* * Initialize 386 and configure to run kernel */ /* * Initialize segments & interrupt table */ int _default_ldt; union descriptor gdt[NGDT * MAXCPU]; /* global descriptor table */ union descriptor ldt[NLDT]; /* local descriptor table */ static struct gate_descriptor idt0[NIDT]; struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ struct region_descriptor r_gdt, r_idt; /* table descriptors */ struct mtx dt_lock; /* lock for GDT and LDT */ static struct i386tss dblfault_tss; static char dblfault_stack[PAGE_SIZE]; extern vm_offset_t proc0kstack; /* * software prototypes -- in more palatable form. * * GCODE_SEL through GUDATA_SEL must be in this order for syscall/sysret * GUFS_SEL and GUGS_SEL must be in this order (swtch.s knows it) */ struct soft_segment_descriptor gdt_segs[] = { /* GNULL_SEL 0 Null Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = SEL_KPL, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GPRIV_SEL 1 SMP Per-Processor Private Data Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUFS_SEL 2 %fs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUGS_SEL 3 %gs Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GCODE_SEL 4 Code Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GDATA_SEL 5 Data Descriptor for kernel */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUCODE_SEL 6 Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GUDATA_SEL 7 Data Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GBIOSLOWMEM_SEL 8 BIOS access to realmode segment 0x40, must be #8 in GDT */ { .ssd_base = 0x400, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_KPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GPROC0_SEL 9 Proc 0 Tss Descriptor */ { .ssd_base = 0x0, .ssd_limit = sizeof(struct i386tss)-1, .ssd_type = SDT_SYS386TSS, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GLDT_SEL 10 LDT Descriptor */ { .ssd_base = (int) ldt, .ssd_limit = sizeof(ldt)-1, .ssd_type = SDT_SYSLDT, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GUSERLDT_SEL 11 User LDT Descriptor per process */ { .ssd_base = (int) ldt, .ssd_limit = (512 * sizeof(union descriptor)-1), .ssd_type = SDT_SYSLDT, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GPANIC_SEL 12 Panic Tss Descriptor */ { .ssd_base = (int) &dblfault_tss, .ssd_limit = sizeof(struct i386tss)-1, .ssd_type = SDT_SYS386TSS, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* GBIOSCODE32_SEL 13 BIOS 32-bit interface (32bit Code) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GBIOSCODE16_SEL 14 BIOS 32-bit interface (16bit Code) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GBIOSDATA_SEL 15 BIOS 32-bit interface (Data) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* GBIOSUTIL_SEL 16 BIOS 16-bit interface (Utility) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GBIOSARGS_SEL 17 BIOS 16-bit interface (Arguments) */ { .ssd_base = 0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = 0, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 1 }, /* GNDIS_SEL 18 NDIS Descriptor */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, }; static struct soft_segment_descriptor ldt_segs[] = { /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Code Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMERA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, /* Null Descriptor - overwritten by call gate */ { .ssd_base = 0x0, .ssd_limit = 0x0, .ssd_type = 0, .ssd_dpl = 0, .ssd_p = 0, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 0, .ssd_gran = 0 }, /* Data Descriptor for user */ { .ssd_base = 0x0, .ssd_limit = 0xfffff, .ssd_type = SDT_MEMRWA, .ssd_dpl = SEL_UPL, .ssd_p = 1, .ssd_xx = 0, .ssd_xx1 = 0, .ssd_def32 = 1, .ssd_gran = 1 }, }; void setidt(idx, func, typ, dpl, selec) int idx; inthand_t *func; int typ; int dpl; int selec; { struct gate_descriptor *ip; ip = idt + idx; ip->gd_looffset = (int)func; ip->gd_selector = selec; ip->gd_stkcpy = 0; ip->gd_xx = 0; ip->gd_type = typ; ip->gd_dpl = dpl; ip->gd_p = 1; ip->gd_hioffset = ((int)func)>>16 ; } extern inthand_t IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), IDTVEC(xmm), #ifdef KDTRACE_HOOKS IDTVEC(dtrace_ret), #endif #ifdef XENHVM IDTVEC(xen_intr_upcall), #endif IDTVEC(lcall_syscall), IDTVEC(int0x80_syscall); #ifdef DDB /* * Display the index and function name of any IDT entries that don't use * the default 'rsvd' entry point. */ DB_SHOW_COMMAND(idt, db_show_idt) { struct gate_descriptor *ip; int idx; uintptr_t func; ip = idt; for (idx = 0; idx < NIDT && !db_pager_quit; idx++) { func = (ip->gd_hioffset << 16 | ip->gd_looffset); if (func != (uintptr_t)&IDTVEC(rsvd)) { db_printf("%3d\t", idx); db_printsym(func, DB_STGY_PROC); db_printf("\n"); } ip++; } } /* Show privileged registers. */ DB_SHOW_COMMAND(sysregs, db_show_sysregs) { uint64_t idtr, gdtr; idtr = ridt(); db_printf("idtr\t0x%08x/%04x\n", (u_int)(idtr >> 16), (u_int)idtr & 0xffff); gdtr = rgdt(); db_printf("gdtr\t0x%08x/%04x\n", (u_int)(gdtr >> 16), (u_int)gdtr & 0xffff); db_printf("ldtr\t0x%04x\n", rldt()); db_printf("tr\t0x%04x\n", rtr()); db_printf("cr0\t0x%08x\n", rcr0()); db_printf("cr2\t0x%08x\n", rcr2()); db_printf("cr3\t0x%08x\n", rcr3()); db_printf("cr4\t0x%08x\n", rcr4()); if (rcr4() & CR4_XSAVE) db_printf("xcr0\t0x%016llx\n", rxcr(0)); if (amd_feature & (AMDID_NX | AMDID_LM)) db_printf("EFER\t0x%016llx\n", rdmsr(MSR_EFER)); if (cpu_feature2 & (CPUID2_VMX | CPUID2_SMX)) db_printf("FEATURES_CTL\t0x%016llx\n", rdmsr(MSR_IA32_FEATURE_CONTROL)); if ((cpu_vendor_id == CPU_VENDOR_INTEL || cpu_vendor_id == CPU_VENDOR_AMD) && CPUID_TO_FAMILY(cpu_id) >= 6) db_printf("DEBUG_CTL\t0x%016llx\n", rdmsr(MSR_DEBUGCTLMSR)); if (cpu_feature & CPUID_PAT) db_printf("PAT\t0x%016llx\n", rdmsr(MSR_PAT)); } DB_SHOW_COMMAND(dbregs, db_show_dbregs) { db_printf("dr0\t0x%08x\n", rdr0()); db_printf("dr1\t0x%08x\n", rdr1()); db_printf("dr2\t0x%08x\n", rdr2()); db_printf("dr3\t0x%08x\n", rdr3()); db_printf("dr6\t0x%08x\n", rdr6()); db_printf("dr7\t0x%08x\n", rdr7()); } #endif void sdtossd(sd, ssd) struct segment_descriptor *sd; struct soft_segment_descriptor *ssd; { ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; ssd->ssd_type = sd->sd_type; ssd->ssd_dpl = sd->sd_dpl; ssd->ssd_p = sd->sd_p; ssd->ssd_def32 = sd->sd_def32; ssd->ssd_gran = sd->sd_gran; } #if !defined(PC98) static int add_physmap_entry(uint64_t base, uint64_t length, vm_paddr_t *physmap, int *physmap_idxp) { int i, insert_idx, physmap_idx; physmap_idx = *physmap_idxp; if (length == 0) return (1); #ifndef PAE if (base > 0xffffffff) { printf("%uK of memory above 4GB ignored\n", (u_int)(length / 1024)); return (1); } #endif /* * Find insertion point while checking for overlap. Start off by * assuming the new entry will be added to the end. */ insert_idx = physmap_idx + 2; for (i = 0; i <= physmap_idx; i += 2) { if (base < physmap[i + 1]) { if (base + length <= physmap[i]) { insert_idx = i; break; } if (boothowto & RB_VERBOSE) printf( "Overlapping memory regions, ignoring second region\n"); return (1); } } /* See if we can prepend to the next entry. */ if (insert_idx <= physmap_idx && base + length == physmap[insert_idx]) { physmap[insert_idx] = base; return (1); } /* See if we can append to the previous entry. */ if (insert_idx > 0 && base == physmap[insert_idx - 1]) { physmap[insert_idx - 1] += length; return (1); } physmap_idx += 2; *physmap_idxp = physmap_idx; if (physmap_idx == PHYSMAP_SIZE) { printf( "Too many segments in the physical address map, giving up\n"); return (0); } /* * Move the last 'N' entries down to make room for the new * entry if needed. */ for (i = physmap_idx; i > insert_idx; i -= 2) { physmap[i] = physmap[i - 2]; physmap[i + 1] = physmap[i - 1]; } /* Insert the new entry. */ physmap[insert_idx] = base; physmap[insert_idx + 1] = base + length; return (1); } static int add_smap_entry(struct bios_smap *smap, vm_paddr_t *physmap, int *physmap_idxp) { if (boothowto & RB_VERBOSE) printf("SMAP type=%02x base=%016llx len=%016llx\n", smap->type, smap->base, smap->length); if (smap->type != SMAP_TYPE_MEMORY) return (1); return (add_physmap_entry(smap->base, smap->length, physmap, physmap_idxp)); } static void add_smap_entries(struct bios_smap *smapbase, vm_paddr_t *physmap, int *physmap_idxp) { struct bios_smap *smap, *smapend; u_int32_t smapsize; /* * Memory map from INT 15:E820. * * subr_module.c says: * "Consumer may safely assume that size value precedes data." * ie: an int32_t immediately precedes SMAP. */ smapsize = *((u_int32_t *)smapbase - 1); smapend = (struct bios_smap *)((uintptr_t)smapbase + smapsize); for (smap = smapbase; smap < smapend; smap++) if (!add_smap_entry(smap, physmap, physmap_idxp)) break; } #endif /* !PC98 */ static void basemem_setup(void) { vm_paddr_t pa; pt_entry_t *pte; int i; if (basemem > 640) { printf("Preposterous BIOS basemem of %uK, truncating to 640K\n", basemem); basemem = 640; } /* * XXX if biosbasemem is now < 640, there is a `hole' * between the end of base memory and the start of * ISA memory. The hole may be empty or it may * contain BIOS code or data. Map it read/write so * that the BIOS can write to it. (Memory from 0 to * the physical end of the kernel is mapped read-only * to begin with and then parts of it are remapped. * The parts that aren't remapped form holes that * remain read-only and are unused by the kernel. * The base memory area is below the physical end of * the kernel and right now forms a read-only hole. * The part of it from PAGE_SIZE to * (trunc_page(biosbasemem * 1024) - 1) will be * remapped and used by the kernel later.) * * This code is similar to the code used in * pmap_mapdev, but since no memory needs to be * allocated we simply change the mapping. */ for (pa = trunc_page(basemem * 1024); pa < ISA_HOLE_START; pa += PAGE_SIZE) pmap_kenter(KERNBASE + pa, pa); /* * Map pages between basemem and ISA_HOLE_START, if any, r/w into * the vm86 page table so that vm86 can scribble on them using * the vm86 map too. XXX: why 2 ways for this and only 1 way for * page 0, at least as initialized here? */ pte = (pt_entry_t *)vm86paddr; for (i = basemem / 4; i < 160; i++) pte[i] = (i << PAGE_SHIFT) | PG_V | PG_RW | PG_U; } /* * Populate the (physmap) array with base/bound pairs describing the * available physical memory in the system, then test this memory and * build the phys_avail array describing the actually-available memory. * * If we cannot accurately determine the physical memory map, then use * value from the 0xE801 call, and failing that, the RTC. * * Total memory size may be set by the kernel environment variable * hw.physmem or the compile-time define MAXMEM. * * XXX first should be vm_paddr_t. */ #ifdef PC98 static void getmemsize(int first) { int off, physmap_idx, pa_indx, da_indx; u_long physmem_tunable, memtest; vm_paddr_t physmap[PHYSMAP_SIZE]; pt_entry_t *pte; quad_t dcons_addr, dcons_size; int i; int pg_n; u_int extmem; u_int under16; vm_paddr_t pa; bzero(physmap, sizeof(physmap)); /* XXX - some of EPSON machines can't use PG_N */ pg_n = PG_N; if (pc98_machine_type & M_EPSON_PC98) { switch (epson_machine_id) { #ifdef WB_CACHE default: #endif case EPSON_PC486_HX: case EPSON_PC486_HG: case EPSON_PC486_HA: pg_n = 0; break; } } under16 = pc98_getmemsize(&basemem, &extmem); basemem_setup(); physmap[0] = 0; physmap[1] = basemem * 1024; physmap_idx = 2; physmap[physmap_idx] = 0x100000; physmap[physmap_idx + 1] = physmap[physmap_idx] + extmem * 1024; /* * Now, physmap contains a map of physical memory. */ #ifdef SMP /* make hole for AP bootstrap code */ physmap[1] = mp_bootaddress(physmap[1]); #endif /* * Maxmem isn't the "maximum memory", it's one larger than the * highest page of the physical address space. It should be * called something like "Maxphyspage". We may adjust this * based on ``hw.physmem'' and the results of the memory test. */ Maxmem = atop(physmap[physmap_idx + 1]); #ifdef MAXMEM Maxmem = MAXMEM / 4; #endif if (TUNABLE_ULONG_FETCH("hw.physmem", &physmem_tunable)) Maxmem = atop(physmem_tunable); /* * By default keep the memtest enabled. Use a general name so that * one could eventually do more with the code than just disable it. */ memtest = 1; TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest); if (atop(physmap[physmap_idx + 1]) != Maxmem && (boothowto & RB_VERBOSE)) printf("Physical memory use set to %ldK\n", Maxmem * 4); /* * If Maxmem has been increased beyond what the system has detected, * extend the last memory segment to the new limit. */ if (atop(physmap[physmap_idx + 1]) < Maxmem) physmap[physmap_idx + 1] = ptoa((vm_paddr_t)Maxmem); /* * We need to divide chunk if Maxmem is larger than 16MB and * under 16MB area is not full of memory. * (1) system area (15-16MB region) is cut off * (2) extended memory is only over 16MB area (ex. Melco "HYPERMEMORY") */ if ((under16 != 16 * 1024) && (extmem > 15 * 1024)) { /* 15M - 16M region is cut off, so need to divide chunk */ physmap[physmap_idx + 1] = under16 * 1024; physmap_idx += 2; physmap[physmap_idx] = 0x1000000; physmap[physmap_idx + 1] = physmap[2] + extmem * 1024; } /* call pmap initialization to make new kernel address space */ pmap_bootstrap(first); /* * Size up each available chunk of physical memory. */ physmap[0] = PAGE_SIZE; /* mask off page 0 */ pa_indx = 0; da_indx = 1; phys_avail[pa_indx++] = physmap[0]; phys_avail[pa_indx] = physmap[0]; dump_avail[da_indx] = physmap[0]; pte = CMAP3; /* * Get dcons buffer address */ if (getenv_quad("dcons.addr", &dcons_addr) == 0 || getenv_quad("dcons.size", &dcons_size) == 0) dcons_addr = 0; /* * physmap is in bytes, so when converting to page boundaries, * round up the start address and round down the end address. */ for (i = 0; i <= physmap_idx; i += 2) { vm_paddr_t end; end = ptoa((vm_paddr_t)Maxmem); if (physmap[i + 1] < end) end = trunc_page(physmap[i + 1]); for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { int tmp, page_bad, full; int *ptr = (int *)CADDR3; full = FALSE; /* * block out kernel memory as not available. */ if (pa >= KERNLOAD && pa < first) goto do_dump_avail; /* * block out dcons buffer */ if (dcons_addr > 0 && pa >= trunc_page(dcons_addr) && pa < dcons_addr + dcons_size) goto do_dump_avail; page_bad = FALSE; if (memtest == 0) goto skip_memtest; /* * map page into kernel: valid, read/write,non-cacheable */ *pte = pa | PG_V | PG_RW | pg_n; invltlb(); tmp = *(int *)ptr; /* * Test for alternating 1's and 0's */ *(volatile int *)ptr = 0xaaaaaaaa; if (*(volatile int *)ptr != 0xaaaaaaaa) page_bad = TRUE; /* * Test for alternating 0's and 1's */ *(volatile int *)ptr = 0x55555555; if (*(volatile int *)ptr != 0x55555555) page_bad = TRUE; /* * Test for all 1's */ *(volatile int *)ptr = 0xffffffff; if (*(volatile int *)ptr != 0xffffffff) page_bad = TRUE; /* * Test for all 0's */ *(volatile int *)ptr = 0x0; if (*(volatile int *)ptr != 0x0) page_bad = TRUE; /* * Restore original value. */ *(int *)ptr = tmp; skip_memtest: /* * Adjust array of valid/good pages. */ if (page_bad == TRUE) continue; /* * If this good page is a continuation of the * previous set of good pages, then just increase * the end pointer. Otherwise start a new chunk. * Note that "end" points one higher than end, * making the range >= start and < end. * If we're also doing a speculative memory * test and we at or past the end, bump up Maxmem * so that we keep going. The first bad page * will terminate the loop. */ if (phys_avail[pa_indx] == pa) { phys_avail[pa_indx] += PAGE_SIZE; } else { pa_indx++; if (pa_indx == PHYS_AVAIL_ARRAY_END) { printf( "Too many holes in the physical address space, giving up\n"); pa_indx--; full = TRUE; goto do_dump_avail; } phys_avail[pa_indx++] = pa; /* start */ phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ } physmem++; do_dump_avail: if (dump_avail[da_indx] == pa) { dump_avail[da_indx] += PAGE_SIZE; } else { da_indx++; if (da_indx == DUMP_AVAIL_ARRAY_END) { da_indx--; goto do_next; } dump_avail[da_indx++] = pa; /* start */ dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ } do_next: if (full) break; } } *pte = 0; invltlb(); /* * XXX * The last chunk must contain at least one page plus the message * buffer to avoid complicating other code (message buffer address * calculation, etc.). */ while (phys_avail[pa_indx - 1] + PAGE_SIZE + round_page(msgbufsize) >= phys_avail[pa_indx]) { physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); phys_avail[pa_indx--] = 0; phys_avail[pa_indx--] = 0; } Maxmem = atop(phys_avail[pa_indx]); /* Trim off space for the message buffer. */ phys_avail[pa_indx] -= round_page(msgbufsize); /* Map the message buffer. */ for (off = 0; off < round_page(msgbufsize); off += PAGE_SIZE) pmap_kenter((vm_offset_t)msgbufp + off, phys_avail[pa_indx] + off); } #else /* PC98 */ static void getmemsize(int first) { int has_smap, off, physmap_idx, pa_indx, da_indx; u_long memtest; vm_paddr_t physmap[PHYSMAP_SIZE]; pt_entry_t *pte; quad_t dcons_addr, dcons_size, physmem_tunable; int hasbrokenint12, i, res; u_int extmem; struct vm86frame vmf; struct vm86context vmc; vm_paddr_t pa; struct bios_smap *smap, *smapbase; caddr_t kmdp; has_smap = 0; #ifdef XBOX if (arch_i386_is_xbox) { /* * We queried the memory size before, so chop off 4MB for * the framebuffer and inform the OS of this. */ physmap[0] = 0; physmap[1] = (arch_i386_xbox_memsize * 1024 * 1024) - XBOX_FB_SIZE; physmap_idx = 0; goto physmap_done; } #endif bzero(&vmf, sizeof(vmf)); bzero(physmap, sizeof(physmap)); basemem = 0; /* * Check if the loader supplied an SMAP memory map. If so, * use that and do not make any VM86 calls. */ physmap_idx = 0; smapbase = NULL; kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf32 kernel"); if (kmdp != NULL) smapbase = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (smapbase != NULL) { add_smap_entries(smapbase, physmap, &physmap_idx); has_smap = 1; goto have_smap; } /* * Some newer BIOSes have a broken INT 12H implementation * which causes a kernel panic immediately. In this case, we * need use the SMAP to determine the base memory size. */ hasbrokenint12 = 0; TUNABLE_INT_FETCH("hw.hasbrokenint12", &hasbrokenint12); if (hasbrokenint12 == 0) { /* Use INT12 to determine base memory size. */ vm86_intcall(0x12, &vmf); basemem = vmf.vmf_ax; basemem_setup(); } /* * Fetch the memory map with INT 15:E820. Map page 1 R/W into * the kernel page table so we can use it as a buffer. The * kernel will unmap this page later. */ pmap_kenter(KERNBASE + (1 << PAGE_SHIFT), 1 << PAGE_SHIFT); vmc.npages = 0; smap = (void *)vm86_addpage(&vmc, 1, KERNBASE + (1 << PAGE_SHIFT)); res = vm86_getptr(&vmc, (vm_offset_t)smap, &vmf.vmf_es, &vmf.vmf_di); KASSERT(res != 0, ("vm86_getptr() failed: address not found")); vmf.vmf_ebx = 0; do { vmf.vmf_eax = 0xE820; vmf.vmf_edx = SMAP_SIG; vmf.vmf_ecx = sizeof(struct bios_smap); i = vm86_datacall(0x15, &vmf, &vmc); if (i || vmf.vmf_eax != SMAP_SIG) break; has_smap = 1; if (!add_smap_entry(smap, physmap, &physmap_idx)) break; } while (vmf.vmf_ebx != 0); have_smap: /* * If we didn't fetch the "base memory" size from INT12, * figure it out from the SMAP (or just guess). */ if (basemem == 0) { for (i = 0; i <= physmap_idx; i += 2) { if (physmap[i] == 0x00000000) { basemem = physmap[i + 1] / 1024; break; } } /* XXX: If we couldn't find basemem from SMAP, just guess. */ if (basemem == 0) basemem = 640; basemem_setup(); } if (physmap[1] != 0) goto physmap_done; /* * If we failed to find an SMAP, figure out the extended * memory size. We will then build a simple memory map with * two segments, one for "base memory" and the second for * "extended memory". Note that "extended memory" starts at a * physical address of 1MB and that both basemem and extmem * are in units of 1KB. * * First, try to fetch the extended memory size via INT 15:E801. */ vmf.vmf_ax = 0xE801; if (vm86_intcall(0x15, &vmf) == 0) { extmem = vmf.vmf_cx + vmf.vmf_dx * 64; } else { /* * If INT15:E801 fails, this is our last ditch effort * to determine the extended memory size. Currently * we prefer the RTC value over INT15:88. */ #if 0 vmf.vmf_ah = 0x88; vm86_intcall(0x15, &vmf); extmem = vmf.vmf_ax; #else extmem = rtcin(RTC_EXTLO) + (rtcin(RTC_EXTHI) << 8); #endif } /* * Special hack for chipsets that still remap the 384k hole when * there's 16MB of memory - this really confuses people that * are trying to use bus mastering ISA controllers with the * "16MB limit"; they only have 16MB, but the remapping puts * them beyond the limit. * * If extended memory is between 15-16MB (16-17MB phys address range), * chop it to 15MB. */ if ((extmem > 15 * 1024) && (extmem < 16 * 1024)) extmem = 15 * 1024; physmap[0] = 0; physmap[1] = basemem * 1024; physmap_idx = 2; physmap[physmap_idx] = 0x100000; physmap[physmap_idx + 1] = physmap[physmap_idx] + extmem * 1024; physmap_done: /* * Now, physmap contains a map of physical memory. */ #ifdef SMP /* make hole for AP bootstrap code */ physmap[1] = mp_bootaddress(physmap[1]); #endif /* * Maxmem isn't the "maximum memory", it's one larger than the * highest page of the physical address space. It should be * called something like "Maxphyspage". We may adjust this * based on ``hw.physmem'' and the results of the memory test. */ Maxmem = atop(physmap[physmap_idx + 1]); #ifdef MAXMEM Maxmem = MAXMEM / 4; #endif if (TUNABLE_QUAD_FETCH("hw.physmem", &physmem_tunable)) Maxmem = atop(physmem_tunable); /* * If we have an SMAP, don't allow MAXMEM or hw.physmem to extend * the amount of memory in the system. */ if (has_smap && Maxmem > atop(physmap[physmap_idx + 1])) Maxmem = atop(physmap[physmap_idx + 1]); /* * By default enable the memory test on real hardware, and disable * it if we appear to be running in a VM. This avoids touching all * pages unnecessarily, which doesn't matter on real hardware but is * bad for shared VM hosts. Use a general name so that * one could eventually do more with the code than just disable it. */ memtest = (vm_guest > VM_GUEST_NO) ? 0 : 1; TUNABLE_ULONG_FETCH("hw.memtest.tests", &memtest); if (atop(physmap[physmap_idx + 1]) != Maxmem && (boothowto & RB_VERBOSE)) printf("Physical memory use set to %ldK\n", Maxmem * 4); /* * If Maxmem has been increased beyond what the system has detected, * extend the last memory segment to the new limit. */ if (atop(physmap[physmap_idx + 1]) < Maxmem) physmap[physmap_idx + 1] = ptoa((vm_paddr_t)Maxmem); /* call pmap initialization to make new kernel address space */ pmap_bootstrap(first); /* * Size up each available chunk of physical memory. */ physmap[0] = PAGE_SIZE; /* mask off page 0 */ pa_indx = 0; da_indx = 1; phys_avail[pa_indx++] = physmap[0]; phys_avail[pa_indx] = physmap[0]; dump_avail[da_indx] = physmap[0]; pte = CMAP3; /* * Get dcons buffer address */ if (getenv_quad("dcons.addr", &dcons_addr) == 0 || getenv_quad("dcons.size", &dcons_size) == 0) dcons_addr = 0; /* * physmap is in bytes, so when converting to page boundaries, * round up the start address and round down the end address. */ for (i = 0; i <= physmap_idx; i += 2) { vm_paddr_t end; end = ptoa((vm_paddr_t)Maxmem); if (physmap[i + 1] < end) end = trunc_page(physmap[i + 1]); for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { int tmp, page_bad, full; int *ptr = (int *)CADDR3; full = FALSE; /* * block out kernel memory as not available. */ if (pa >= KERNLOAD && pa < first) goto do_dump_avail; /* * block out dcons buffer */ if (dcons_addr > 0 && pa >= trunc_page(dcons_addr) && pa < dcons_addr + dcons_size) goto do_dump_avail; page_bad = FALSE; if (memtest == 0) goto skip_memtest; /* * map page into kernel: valid, read/write,non-cacheable */ *pte = pa | PG_V | PG_RW | PG_N; invltlb(); tmp = *(int *)ptr; /* * Test for alternating 1's and 0's */ *(volatile int *)ptr = 0xaaaaaaaa; if (*(volatile int *)ptr != 0xaaaaaaaa) page_bad = TRUE; /* * Test for alternating 0's and 1's */ *(volatile int *)ptr = 0x55555555; if (*(volatile int *)ptr != 0x55555555) page_bad = TRUE; /* * Test for all 1's */ *(volatile int *)ptr = 0xffffffff; if (*(volatile int *)ptr != 0xffffffff) page_bad = TRUE; /* * Test for all 0's */ *(volatile int *)ptr = 0x0; if (*(volatile int *)ptr != 0x0) page_bad = TRUE; /* * Restore original value. */ *(int *)ptr = tmp; skip_memtest: /* * Adjust array of valid/good pages. */ if (page_bad == TRUE) continue; /* * If this good page is a continuation of the * previous set of good pages, then just increase * the end pointer. Otherwise start a new chunk. * Note that "end" points one higher than end, * making the range >= start and < end. * If we're also doing a speculative memory * test and we at or past the end, bump up Maxmem * so that we keep going. The first bad page * will terminate the loop. */ if (phys_avail[pa_indx] == pa) { phys_avail[pa_indx] += PAGE_SIZE; } else { pa_indx++; if (pa_indx == PHYS_AVAIL_ARRAY_END) { printf( "Too many holes in the physical address space, giving up\n"); pa_indx--; full = TRUE; goto do_dump_avail; } phys_avail[pa_indx++] = pa; /* start */ phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ } physmem++; do_dump_avail: if (dump_avail[da_indx] == pa) { dump_avail[da_indx] += PAGE_SIZE; } else { da_indx++; if (da_indx == DUMP_AVAIL_ARRAY_END) { da_indx--; goto do_next; } dump_avail[da_indx++] = pa; /* start */ dump_avail[da_indx] = pa + PAGE_SIZE; /* end */ } do_next: if (full) break; } } *pte = 0; invltlb(); /* * XXX * The last chunk must contain at least one page plus the message * buffer to avoid complicating other code (message buffer address * calculation, etc.). */ while (phys_avail[pa_indx - 1] + PAGE_SIZE + round_page(msgbufsize) >= phys_avail[pa_indx]) { physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); phys_avail[pa_indx--] = 0; phys_avail[pa_indx--] = 0; } Maxmem = atop(phys_avail[pa_indx]); /* Trim off space for the message buffer. */ phys_avail[pa_indx] -= round_page(msgbufsize); /* Map the message buffer. */ for (off = 0; off < round_page(msgbufsize); off += PAGE_SIZE) pmap_kenter((vm_offset_t)msgbufp + off, phys_avail[pa_indx] + off); } #endif /* PC98 */ register_t init386(first) int first; { struct gate_descriptor *gdp; int gsel_tss, metadata_missing, x, pa; struct pcpu *pc; #ifdef CPU_ENABLE_SSE struct xstate_hdr *xhdr; #endif thread0.td_kstack = proc0kstack; - thread0.td_kstack_pages = KSTACK_PAGES; + thread0.td_kstack_pages = TD0_KSTACK_PAGES; /* * This may be done better later if it gets more high level * components in it. If so just link td->td_proc here. */ proc_linkup0(&proc0, &thread0); #ifdef PC98 /* * Initialize DMAC */ pc98_init_dmac(); #endif metadata_missing = 0; if (bootinfo.bi_modulep) { preload_metadata = (caddr_t)bootinfo.bi_modulep + KERNBASE; preload_bootstrap_relocate(KERNBASE); } else { metadata_missing = 1; } if (envmode == 1) kern_envp = static_env; else if (bootinfo.bi_envp) kern_envp = (caddr_t)bootinfo.bi_envp + KERNBASE; /* Init basic tunables, hz etc */ init_param1(); /* * Make gdt memory segments. All segments cover the full 4GB * of address space and permissions are enforced at page level. */ gdt_segs[GCODE_SEL].ssd_limit = atop(0 - 1); gdt_segs[GDATA_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUCODE_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUDATA_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUFS_SEL].ssd_limit = atop(0 - 1); gdt_segs[GUGS_SEL].ssd_limit = atop(0 - 1); pc = &__pcpu[0]; gdt_segs[GPRIV_SEL].ssd_limit = atop(0 - 1); gdt_segs[GPRIV_SEL].ssd_base = (int) pc; gdt_segs[GPROC0_SEL].ssd_base = (int) &pc->pc_common_tss; for (x = 0; x < NGDT; x++) ssdtosd(&gdt_segs[x], &gdt[x].sd); r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; r_gdt.rd_base = (int) gdt; mtx_init(&dt_lock, "descriptor tables", NULL, MTX_SPIN); lgdt(&r_gdt); pcpu_init(pc, 0, sizeof(struct pcpu)); for (pa = first; pa < first + DPCPU_SIZE; pa += PAGE_SIZE) pmap_kenter(pa + KERNBASE, pa); dpcpu_init((void *)(first + KERNBASE), 0); first += DPCPU_SIZE; PCPU_SET(prvspace, pc); PCPU_SET(curthread, &thread0); /* * Initialize mutexes. * * icu_lock: in order to allow an interrupt to occur in a critical * section, to set pcpu->ipending (etc...) properly, we * must be able to get the icu lock, so it can't be * under witness. */ mutex_init(); mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS | MTX_NOPROFILE); /* make ldt memory segments */ ldt_segs[LUCODE_SEL].ssd_limit = atop(0 - 1); ldt_segs[LUDATA_SEL].ssd_limit = atop(0 - 1); for (x = 0; x < sizeof ldt_segs / sizeof ldt_segs[0]; x++) ssdtosd(&ldt_segs[x], &ldt[x].sd); _default_ldt = GSEL(GLDT_SEL, SEL_KPL); lldt(_default_ldt); PCPU_SET(currentldt, _default_ldt); /* exceptions */ for (x = 0; x < NIDT; x++) setidt(x, &IDTVEC(rsvd), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DE, &IDTVEC(div), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DB, &IDTVEC(dbg), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_BP, &IDTVEC(bpt), SDT_SYS386IGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_OF, &IDTVEC(ofl), SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_BR, &IDTVEC(bnd), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_UD, &IDTVEC(ill), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NM, &IDTVEC(dna), SDT_SYS386TGT, SEL_KPL , GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DF, 0, SDT_SYSTASKGT, SEL_KPL, GSEL(GPANIC_SEL, SEL_KPL)); setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_TS, &IDTVEC(tss), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NP, &IDTVEC(missing), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_SS, &IDTVEC(stk), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_GP, &IDTVEC(prot), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_PF, &IDTVEC(page), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_MF, &IDTVEC(fpu), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_AC, &IDTVEC(align), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_MC, &IDTVEC(mchk), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_XF, &IDTVEC(xmm), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_SYSCALL, &IDTVEC(int0x80_syscall), SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); #ifdef KDTRACE_HOOKS setidt(IDT_DTRACE_RET, &IDTVEC(dtrace_ret), SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); #endif #ifdef XENHVM setidt(IDT_EVTCHN, &IDTVEC(xen_intr_upcall), SDT_SYS386IGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); #endif r_idt.rd_limit = sizeof(idt0) - 1; r_idt.rd_base = (int) idt; lidt(&r_idt); #ifdef XBOX /* * The following code queries the PCI ID of 0:0:0. For the XBOX, * This should be 0x10de / 0x02a5. * * This is exactly what Linux does. */ outl(0xcf8, 0x80000000); if (inl(0xcfc) == 0x02a510de) { arch_i386_is_xbox = 1; pic16l_setled(XBOX_LED_GREEN); /* * We are an XBOX, but we may have either 64MB or 128MB of * memory. The PCI host bridge should be programmed for this, * so we just query it. */ outl(0xcf8, 0x80000084); arch_i386_xbox_memsize = (inl(0xcfc) == 0x7FFFFFF) ? 128 : 64; } #endif /* XBOX */ /* * Initialize the clock before the console so that console * initialization can use DELAY(). */ clock_init(); /* * Initialize the console before we print anything out. */ cninit(); if (metadata_missing) printf("WARNING: loader(8) metadata is missing!\n"); #ifdef DEV_ISA #ifdef DEV_ATPIC #ifndef PC98 elcr_probe(); #endif atpic_startup(); #else /* Reset and mask the atpics and leave them shut down. */ atpic_reset(); /* * Point the ICU spurious interrupt vectors at the APIC spurious * interrupt handler. */ setidt(IDT_IO_INTS + 7, IDTVEC(spuriousint), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_IO_INTS + 15, IDTVEC(spuriousint), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); #endif #endif #ifdef DDB db_fetch_ksymtab(bootinfo.bi_symtab, bootinfo.bi_esymtab); #endif kdb_init(); #ifdef KDB if (boothowto & RB_KDB) kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger"); #endif finishidentcpu(); /* Final stage of CPU initialization */ setidt(IDT_UD, &IDTVEC(ill), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_GP, &IDTVEC(prot), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); initializecpu(); /* Initialize CPU registers */ initializecpucache(); /* pointer to selector slot for %fs/%gs */ PCPU_SET(fsgs_gdt, &gdt[GUFS_SEL].sd); dblfault_tss.tss_esp = dblfault_tss.tss_esp0 = dblfault_tss.tss_esp1 = dblfault_tss.tss_esp2 = (int)&dblfault_stack[sizeof(dblfault_stack)]; dblfault_tss.tss_ss = dblfault_tss.tss_ss0 = dblfault_tss.tss_ss1 = dblfault_tss.tss_ss2 = GSEL(GDATA_SEL, SEL_KPL); #if defined(PAE) || defined(PAE_TABLES) dblfault_tss.tss_cr3 = (int)IdlePDPT; #else dblfault_tss.tss_cr3 = (int)IdlePTD; #endif dblfault_tss.tss_eip = (int)dblfault_handler; dblfault_tss.tss_eflags = PSL_KERNEL; dblfault_tss.tss_ds = dblfault_tss.tss_es = dblfault_tss.tss_gs = GSEL(GDATA_SEL, SEL_KPL); dblfault_tss.tss_fs = GSEL(GPRIV_SEL, SEL_KPL); dblfault_tss.tss_cs = GSEL(GCODE_SEL, SEL_KPL); dblfault_tss.tss_ldt = GSEL(GLDT_SEL, SEL_KPL); vm86_initialize(); getmemsize(first); init_param2(physmem); /* now running on new page tables, configured,and u/iom is accessible */ msgbufinit(msgbufp, msgbufsize); #ifdef DEV_NPX npxinit(true); #endif /* * Set up thread0 pcb after npxinit calculated pcb + fpu save * area size. Zero out the extended state header in fpu save * area. */ thread0.td_pcb = get_pcb_td(&thread0); bzero(get_pcb_user_save_td(&thread0), cpu_max_ext_state_size); #ifdef CPU_ENABLE_SSE if (use_xsave) { xhdr = (struct xstate_hdr *)(get_pcb_user_save_td(&thread0) + 1); xhdr->xstate_bv = xsave_mask; } #endif PCPU_SET(curpcb, thread0.td_pcb); /* make an initial tss so cpu can get interrupt stack on syscall! */ /* Note: -16 is so we can grow the trapframe if we came from vm86 */ PCPU_SET(common_tss.tss_esp0, (vm_offset_t)thread0.td_pcb - 16); PCPU_SET(common_tss.tss_ss0, GSEL(GDATA_SEL, SEL_KPL)); gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); PCPU_SET(tss_gdt, &gdt[GPROC0_SEL].sd); PCPU_SET(common_tssd, *PCPU_GET(tss_gdt)); PCPU_SET(common_tss.tss_ioopt, (sizeof (struct i386tss)) << 16); ltr(gsel_tss); /* make a call gate to reenter kernel with */ gdp = &ldt[LSYS5CALLS_SEL].gd; x = (int) &IDTVEC(lcall_syscall); gdp->gd_looffset = x; gdp->gd_selector = GSEL(GCODE_SEL,SEL_KPL); gdp->gd_stkcpy = 1; gdp->gd_type = SDT_SYS386CGT; gdp->gd_dpl = SEL_UPL; gdp->gd_p = 1; gdp->gd_hioffset = x >> 16; /* XXX does this work? */ /* XXX yes! */ ldt[LBSDICALLS_SEL] = ldt[LSYS5CALLS_SEL]; ldt[LSOL26CALLS_SEL] = ldt[LSYS5CALLS_SEL]; /* transfer to user mode */ _ucodesel = GSEL(GUCODE_SEL, SEL_UPL); _udatasel = GSEL(GUDATA_SEL, SEL_UPL); /* setup proc 0's pcb */ thread0.td_pcb->pcb_flags = 0; #if defined(PAE) || defined(PAE_TABLES) thread0.td_pcb->pcb_cr3 = (int)IdlePDPT; #else thread0.td_pcb->pcb_cr3 = (int)IdlePTD; #endif thread0.td_pcb->pcb_ext = 0; thread0.td_frame = &proc0_tf; cpu_probe_amdc1e(); #ifdef FDT x86_init_fdt(); #endif /* Location of kernel stack for locore */ return ((register_t)thread0.td_pcb); } void cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) { pcpu->pc_acpi_id = 0xffffffff; } #ifndef PC98 static int smap_sysctl_handler(SYSCTL_HANDLER_ARGS) { struct bios_smap *smapbase; struct bios_smap_xattr smap; caddr_t kmdp; uint32_t *smapattr; int count, error, i; /* Retrieve the system memory map from the loader. */ kmdp = preload_search_by_type("elf kernel"); if (kmdp == NULL) kmdp = preload_search_by_type("elf32 kernel"); if (kmdp == NULL) return (0); smapbase = (struct bios_smap *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP); if (smapbase == NULL) return (0); smapattr = (uint32_t *)preload_search_info(kmdp, MODINFO_METADATA | MODINFOMD_SMAP_XATTR); count = *((u_int32_t *)smapbase - 1) / sizeof(*smapbase); error = 0; for (i = 0; i < count; i++) { smap.base = smapbase[i].base; smap.length = smapbase[i].length; smap.type = smapbase[i].type; if (smapattr != NULL) smap.xattr = smapattr[i]; else smap.xattr = 0; error = SYSCTL_OUT(req, &smap, sizeof(smap)); } return (error); } SYSCTL_PROC(_machdep, OID_AUTO, smap, CTLTYPE_OPAQUE|CTLFLAG_RD, NULL, 0, smap_sysctl_handler, "S,bios_smap_xattr", "Raw BIOS SMAP data"); #endif /* !PC98 */ void spinlock_enter(void) { struct thread *td; register_t flags; td = curthread; if (td->td_md.md_spinlock_count == 0) { flags = intr_disable(); td->td_md.md_spinlock_count = 1; td->td_md.md_saved_flags = flags; } else td->td_md.md_spinlock_count++; critical_enter(); } void spinlock_exit(void) { struct thread *td; register_t flags; td = curthread; critical_exit(); flags = td->td_md.md_saved_flags; td->td_md.md_spinlock_count--; if (td->td_md.md_spinlock_count == 0) intr_restore(flags); } #if defined(I586_CPU) && !defined(NO_F00F_HACK) static void f00f_hack(void *unused); SYSINIT(f00f_hack, SI_SUB_INTRINSIC, SI_ORDER_FIRST, f00f_hack, NULL); static void f00f_hack(void *unused) { struct gate_descriptor *new_idt; vm_offset_t tmp; if (!has_f00f_bug) return; GIANT_REQUIRED; printf("Intel Pentium detected, installing workaround for F00F bug\n"); tmp = kmem_malloc(kernel_arena, PAGE_SIZE * 2, M_WAITOK | M_ZERO); if (tmp == 0) panic("kmem_malloc returned 0"); /* Put the problematic entry (#6) at the end of the lower page. */ new_idt = (struct gate_descriptor*) (tmp + PAGE_SIZE - 7 * sizeof(struct gate_descriptor)); bcopy(idt, new_idt, sizeof(idt0)); r_idt.rd_base = (u_int)new_idt; lidt(&r_idt); idt = new_idt; pmap_protect(kernel_pmap, tmp, tmp + PAGE_SIZE, VM_PROT_READ); } #endif /* defined(I586_CPU) && !NO_F00F_HACK */ /* * Construct a PCB from a trapframe. This is called from kdb_trap() where * we want to start a backtrace from the function that caused us to enter * the debugger. We have the context in the trapframe, but base the trace * on the PCB. The PCB doesn't have to be perfect, as long as it contains * enough for a backtrace. */ void makectx(struct trapframe *tf, struct pcb *pcb) { pcb->pcb_edi = tf->tf_edi; pcb->pcb_esi = tf->tf_esi; pcb->pcb_ebp = tf->tf_ebp; pcb->pcb_ebx = tf->tf_ebx; pcb->pcb_eip = tf->tf_eip; pcb->pcb_esp = (ISPL(tf->tf_cs)) ? tf->tf_esp : (int)(tf + 1) - 8; pcb->pcb_gs = rgs(); } int ptrace_set_pc(struct thread *td, u_long addr) { td->td_frame->tf_eip = addr; return (0); } int ptrace_single_step(struct thread *td) { td->td_frame->tf_eflags |= PSL_T; return (0); } int ptrace_clear_single_step(struct thread *td) { td->td_frame->tf_eflags &= ~PSL_T; return (0); } int fill_regs(struct thread *td, struct reg *regs) { struct pcb *pcb; struct trapframe *tp; tp = td->td_frame; pcb = td->td_pcb; regs->r_gs = pcb->pcb_gs; return (fill_frame_regs(tp, regs)); } int fill_frame_regs(struct trapframe *tp, struct reg *regs) { regs->r_fs = tp->tf_fs; regs->r_es = tp->tf_es; regs->r_ds = tp->tf_ds; regs->r_edi = tp->tf_edi; regs->r_esi = tp->tf_esi; regs->r_ebp = tp->tf_ebp; regs->r_ebx = tp->tf_ebx; regs->r_edx = tp->tf_edx; regs->r_ecx = tp->tf_ecx; regs->r_eax = tp->tf_eax; regs->r_eip = tp->tf_eip; regs->r_cs = tp->tf_cs; regs->r_eflags = tp->tf_eflags; regs->r_esp = tp->tf_esp; regs->r_ss = tp->tf_ss; return (0); } int set_regs(struct thread *td, struct reg *regs) { struct pcb *pcb; struct trapframe *tp; tp = td->td_frame; if (!EFL_SECURE(regs->r_eflags, tp->tf_eflags) || !CS_SECURE(regs->r_cs)) return (EINVAL); pcb = td->td_pcb; tp->tf_fs = regs->r_fs; tp->tf_es = regs->r_es; tp->tf_ds = regs->r_ds; tp->tf_edi = regs->r_edi; tp->tf_esi = regs->r_esi; tp->tf_ebp = regs->r_ebp; tp->tf_ebx = regs->r_ebx; tp->tf_edx = regs->r_edx; tp->tf_ecx = regs->r_ecx; tp->tf_eax = regs->r_eax; tp->tf_eip = regs->r_eip; tp->tf_cs = regs->r_cs; tp->tf_eflags = regs->r_eflags; tp->tf_esp = regs->r_esp; tp->tf_ss = regs->r_ss; pcb->pcb_gs = regs->r_gs; return (0); } int fill_fpregs(struct thread *td, struct fpreg *fpregs) { KASSERT(td == curthread || TD_IS_SUSPENDED(td) || P_SHOULDSTOP(td->td_proc), ("not suspended thread %p", td)); #ifdef DEV_NPX npxgetregs(td); #else bzero(fpregs, sizeof(*fpregs)); #endif #ifdef CPU_ENABLE_SSE if (cpu_fxsr) npx_fill_fpregs_xmm(&get_pcb_user_save_td(td)->sv_xmm, (struct save87 *)fpregs); else #endif /* CPU_ENABLE_SSE */ bcopy(&get_pcb_user_save_td(td)->sv_87, fpregs, sizeof(*fpregs)); return (0); } int set_fpregs(struct thread *td, struct fpreg *fpregs) { #ifdef CPU_ENABLE_SSE if (cpu_fxsr) npx_set_fpregs_xmm((struct save87 *)fpregs, &get_pcb_user_save_td(td)->sv_xmm); else #endif /* CPU_ENABLE_SSE */ bcopy(fpregs, &get_pcb_user_save_td(td)->sv_87, sizeof(*fpregs)); #ifdef DEV_NPX npxuserinited(td); #endif return (0); } /* * Get machine context. */ int get_mcontext(struct thread *td, mcontext_t *mcp, int flags) { struct trapframe *tp; struct segment_descriptor *sdp; tp = td->td_frame; PROC_LOCK(curthread->td_proc); mcp->mc_onstack = sigonstack(tp->tf_esp); PROC_UNLOCK(curthread->td_proc); mcp->mc_gs = td->td_pcb->pcb_gs; mcp->mc_fs = tp->tf_fs; mcp->mc_es = tp->tf_es; mcp->mc_ds = tp->tf_ds; mcp->mc_edi = tp->tf_edi; mcp->mc_esi = tp->tf_esi; mcp->mc_ebp = tp->tf_ebp; mcp->mc_isp = tp->tf_isp; mcp->mc_eflags = tp->tf_eflags; if (flags & GET_MC_CLEAR_RET) { mcp->mc_eax = 0; mcp->mc_edx = 0; mcp->mc_eflags &= ~PSL_C; } else { mcp->mc_eax = tp->tf_eax; mcp->mc_edx = tp->tf_edx; } mcp->mc_ebx = tp->tf_ebx; mcp->mc_ecx = tp->tf_ecx; mcp->mc_eip = tp->tf_eip; mcp->mc_cs = tp->tf_cs; mcp->mc_esp = tp->tf_esp; mcp->mc_ss = tp->tf_ss; mcp->mc_len = sizeof(*mcp); get_fpcontext(td, mcp, NULL, 0); sdp = &td->td_pcb->pcb_fsd; mcp->mc_fsbase = sdp->sd_hibase << 24 | sdp->sd_lobase; sdp = &td->td_pcb->pcb_gsd; mcp->mc_gsbase = sdp->sd_hibase << 24 | sdp->sd_lobase; mcp->mc_flags = 0; mcp->mc_xfpustate = 0; mcp->mc_xfpustate_len = 0; bzero(mcp->mc_spare2, sizeof(mcp->mc_spare2)); return (0); } /* * Set machine context. * * However, we don't set any but the user modifiable flags, and we won't * touch the cs selector. */ int set_mcontext(struct thread *td, mcontext_t *mcp) { struct trapframe *tp; char *xfpustate; int eflags, ret; tp = td->td_frame; if (mcp->mc_len != sizeof(*mcp) || (mcp->mc_flags & ~_MC_FLAG_MASK) != 0) return (EINVAL); eflags = (mcp->mc_eflags & PSL_USERCHANGE) | (tp->tf_eflags & ~PSL_USERCHANGE); if (mcp->mc_flags & _MC_HASFPXSTATE) { if (mcp->mc_xfpustate_len > cpu_max_ext_state_size - sizeof(union savefpu)) return (EINVAL); xfpustate = __builtin_alloca(mcp->mc_xfpustate_len); ret = copyin((void *)mcp->mc_xfpustate, xfpustate, mcp->mc_xfpustate_len); if (ret != 0) return (ret); } else xfpustate = NULL; ret = set_fpcontext(td, mcp, xfpustate, mcp->mc_xfpustate_len); if (ret != 0) return (ret); tp->tf_fs = mcp->mc_fs; tp->tf_es = mcp->mc_es; tp->tf_ds = mcp->mc_ds; tp->tf_edi = mcp->mc_edi; tp->tf_esi = mcp->mc_esi; tp->tf_ebp = mcp->mc_ebp; tp->tf_ebx = mcp->mc_ebx; tp->tf_edx = mcp->mc_edx; tp->tf_ecx = mcp->mc_ecx; tp->tf_eax = mcp->mc_eax; tp->tf_eip = mcp->mc_eip; tp->tf_eflags = eflags; tp->tf_esp = mcp->mc_esp; tp->tf_ss = mcp->mc_ss; td->td_pcb->pcb_gs = mcp->mc_gs; return (0); } static void get_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpusave, size_t xfpusave_len) { #ifdef CPU_ENABLE_SSE size_t max_len, len; #endif #ifndef DEV_NPX mcp->mc_fpformat = _MC_FPFMT_NODEV; mcp->mc_ownedfp = _MC_FPOWNED_NONE; bzero(mcp->mc_fpstate, sizeof(mcp->mc_fpstate)); #else mcp->mc_ownedfp = npxgetregs(td); bcopy(get_pcb_user_save_td(td), &mcp->mc_fpstate[0], sizeof(mcp->mc_fpstate)); mcp->mc_fpformat = npxformat(); #ifdef CPU_ENABLE_SSE if (!use_xsave || xfpusave_len == 0) return; max_len = cpu_max_ext_state_size - sizeof(union savefpu); len = xfpusave_len; if (len > max_len) { len = max_len; bzero(xfpusave + max_len, len - max_len); } mcp->mc_flags |= _MC_HASFPXSTATE; mcp->mc_xfpustate_len = len; bcopy(get_pcb_user_save_td(td) + 1, xfpusave, len); #endif #endif } static int set_fpcontext(struct thread *td, mcontext_t *mcp, char *xfpustate, size_t xfpustate_len) { union savefpu *fpstate; int error; if (mcp->mc_fpformat == _MC_FPFMT_NODEV) return (0); else if (mcp->mc_fpformat != _MC_FPFMT_387 && mcp->mc_fpformat != _MC_FPFMT_XMM) return (EINVAL); else if (mcp->mc_ownedfp == _MC_FPOWNED_NONE) { /* We don't care what state is left in the FPU or PCB. */ fpstate_drop(td); error = 0; } else if (mcp->mc_ownedfp == _MC_FPOWNED_FPU || mcp->mc_ownedfp == _MC_FPOWNED_PCB) { #ifdef DEV_NPX fpstate = (union savefpu *)&mcp->mc_fpstate; #ifdef CPU_ENABLE_SSE if (cpu_fxsr) fpstate->sv_xmm.sv_env.en_mxcsr &= cpu_mxcsr_mask; #endif error = npxsetregs(td, fpstate, xfpustate, xfpustate_len); #else error = EINVAL; #endif } else return (EINVAL); return (error); } static void fpstate_drop(struct thread *td) { KASSERT(PCB_USER_FPU(td->td_pcb), ("fpstate_drop: kernel-owned fpu")); critical_enter(); #ifdef DEV_NPX if (PCPU_GET(fpcurthread) == td) npxdrop(); #endif /* * XXX force a full drop of the npx. The above only drops it if we * owned it. npxgetregs() has the same bug in the !cpu_fxsr case. * * XXX I don't much like npxgetregs()'s semantics of doing a full * drop. Dropping only to the pcb matches fnsave's behaviour. * We only need to drop to !PCB_INITDONE in sendsig(). But * sendsig() is the only caller of npxgetregs()... perhaps we just * have too many layers. */ curthread->td_pcb->pcb_flags &= ~(PCB_NPXINITDONE | PCB_NPXUSERINITDONE); critical_exit(); } int fill_dbregs(struct thread *td, struct dbreg *dbregs) { struct pcb *pcb; if (td == NULL) { dbregs->dr[0] = rdr0(); dbregs->dr[1] = rdr1(); dbregs->dr[2] = rdr2(); dbregs->dr[3] = rdr3(); dbregs->dr[4] = rdr4(); dbregs->dr[5] = rdr5(); dbregs->dr[6] = rdr6(); dbregs->dr[7] = rdr7(); } else { pcb = td->td_pcb; dbregs->dr[0] = pcb->pcb_dr0; dbregs->dr[1] = pcb->pcb_dr1; dbregs->dr[2] = pcb->pcb_dr2; dbregs->dr[3] = pcb->pcb_dr3; dbregs->dr[4] = 0; dbregs->dr[5] = 0; dbregs->dr[6] = pcb->pcb_dr6; dbregs->dr[7] = pcb->pcb_dr7; } return (0); } int set_dbregs(struct thread *td, struct dbreg *dbregs) { struct pcb *pcb; int i; if (td == NULL) { load_dr0(dbregs->dr[0]); load_dr1(dbregs->dr[1]); load_dr2(dbregs->dr[2]); load_dr3(dbregs->dr[3]); load_dr4(dbregs->dr[4]); load_dr5(dbregs->dr[5]); load_dr6(dbregs->dr[6]); load_dr7(dbregs->dr[7]); } else { /* * Don't let an illegal value for dr7 get set. Specifically, * check for undefined settings. Setting these bit patterns * result in undefined behaviour and can lead to an unexpected * TRCTRAP. */ for (i = 0; i < 4; i++) { if (DBREG_DR7_ACCESS(dbregs->dr[7], i) == 0x02) return (EINVAL); if (DBREG_DR7_LEN(dbregs->dr[7], i) == 0x02) return (EINVAL); } pcb = td->td_pcb; /* * Don't let a process set a breakpoint that is not within the * process's address space. If a process could do this, it * could halt the system by setting a breakpoint in the kernel * (if ddb was enabled). Thus, we need to check to make sure * that no breakpoints are being enabled for addresses outside * process's address space. * * XXX - what about when the watched area of the user's * address space is written into from within the kernel * ... wouldn't that still cause a breakpoint to be generated * from within kernel mode? */ if (DBREG_DR7_ENABLED(dbregs->dr[7], 0)) { /* dr0 is enabled */ if (dbregs->dr[0] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 1)) { /* dr1 is enabled */ if (dbregs->dr[1] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 2)) { /* dr2 is enabled */ if (dbregs->dr[2] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (DBREG_DR7_ENABLED(dbregs->dr[7], 3)) { /* dr3 is enabled */ if (dbregs->dr[3] >= VM_MAXUSER_ADDRESS) return (EINVAL); } pcb->pcb_dr0 = dbregs->dr[0]; pcb->pcb_dr1 = dbregs->dr[1]; pcb->pcb_dr2 = dbregs->dr[2]; pcb->pcb_dr3 = dbregs->dr[3]; pcb->pcb_dr6 = dbregs->dr[6]; pcb->pcb_dr7 = dbregs->dr[7]; pcb->pcb_flags |= PCB_DBREGS; } return (0); } /* * Return > 0 if a hardware breakpoint has been hit, and the * breakpoint was in user space. Return 0, otherwise. */ int user_dbreg_trap(void) { u_int32_t dr7, dr6; /* debug registers dr6 and dr7 */ u_int32_t bp; /* breakpoint bits extracted from dr6 */ int nbp; /* number of breakpoints that triggered */ caddr_t addr[4]; /* breakpoint addresses */ int i; dr7 = rdr7(); if ((dr7 & 0x000000ff) == 0) { /* * all GE and LE bits in the dr7 register are zero, * thus the trap couldn't have been caused by the * hardware debug registers */ return 0; } nbp = 0; dr6 = rdr6(); bp = dr6 & 0x0000000f; if (!bp) { /* * None of the breakpoint bits are set meaning this * trap was not caused by any of the debug registers */ return 0; } /* * at least one of the breakpoints were hit, check to see * which ones and if any of them are user space addresses */ if (bp & 0x01) { addr[nbp++] = (caddr_t)rdr0(); } if (bp & 0x02) { addr[nbp++] = (caddr_t)rdr1(); } if (bp & 0x04) { addr[nbp++] = (caddr_t)rdr2(); } if (bp & 0x08) { addr[nbp++] = (caddr_t)rdr3(); } for (i = 0; i < nbp; i++) { if (addr[i] < (caddr_t)VM_MAXUSER_ADDRESS) { /* * addr[i] is in user space */ return nbp; } } /* * None of the breakpoints are in user space. */ return 0; } #ifdef KDB /* * Provide inb() and outb() as functions. They are normally only available as * inline functions, thus cannot be called from the debugger. */ /* silence compiler warnings */ u_char inb_(u_short); void outb_(u_short, u_char); u_char inb_(u_short port) { return inb(port); } void outb_(u_short port, u_char data) { outb(port, data); } #endif /* KDB */ Index: head/sys/i386/include/param.h =================================================================== --- head/sys/i386/include/param.h (revision 286287) +++ head/sys/i386/include/param.h (revision 286288) @@ -1,163 +1,168 @@ /*- * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)param.h 5.8 (Berkeley) 6/28/91 * $FreeBSD$ */ #ifndef _I386_INCLUDE_PARAM_H_ #define _I386_INCLUDE_PARAM_H_ #include /* * Machine dependent constants for Intel 386. */ #define __HAVE_ACPI #define __HAVE_PIR #define __PCI_REROUTE_INTERRUPT #ifndef MACHINE #define MACHINE "i386" #endif #ifndef MACHINE_ARCH #define MACHINE_ARCH "i386" #endif #define MID_MACHINE MID_I386 #if defined(SMP) || defined(KLD_MODULE) #ifndef MAXCPU #define MAXCPU 32 #endif #else #define MAXCPU 1 #endif /* SMP || KLD_MODULE */ #ifndef MAXMEMDOM #define MAXMEMDOM 1 #endif #define ALIGNBYTES _ALIGNBYTES #define ALIGN(p) _ALIGN(p) /* * ALIGNED_POINTER is a boolean macro that checks whether an address * is valid to fetch data elements of type t from on this architecture. * This does not reflect the optimal alignment, just the possibility * (within reasonable limits). */ #define ALIGNED_POINTER(p, t) 1 /* * CACHE_LINE_SIZE is the compile-time maximum cache line size for an * architecture. It should be used with appropriate caution. */ #define CACHE_LINE_SHIFT 7 #define CACHE_LINE_SIZE (1 << CACHE_LINE_SHIFT) #define PAGE_SHIFT 12 /* LOG2(PAGE_SIZE) */ #define PAGE_SIZE (1<> PAGE_SHIFT) #define ptoa(x) ((x) << PAGE_SHIFT) #define i386_btop(x) ((x) >> PAGE_SHIFT) #define i386_ptob(x) ((x) << PAGE_SHIFT) #define pgtok(x) ((x) * (PAGE_SIZE / 1024)) #define INKERNEL(va) (((vm_offset_t)(va)) >= VM_MAXUSER_ADDRESS && \ ((vm_offset_t)(va)) < VM_MAX_KERNEL_ADDRESS) #endif /* !_I386_INCLUDE_PARAM_H_ */