Index: head/sys/boot/mips/beri/loader/Makefile
===================================================================
--- head/sys/boot/mips/beri/loader/Makefile	(revision 284596)
+++ head/sys/boot/mips/beri/loader/Makefile	(revision 284597)
@@ -1,148 +1,149 @@
 #-
 # Copyright (c) 2013-2014 Robert N. M. Watson
 # All rights reserved.
 #
 # This software was developed by SRI International and the University of
 # Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237)
 # ("CTSRD"), as part of the DARPA CRASH research programme.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
 # are met:
 # 1. Redistributions of source code must retain the above copyright
 #    notice, this list of conditions and the following disclaimer.
 # 2. Redistributions in binary form must reproduce the above copyright
 #    notice, this list of conditions and the following disclaimer in the
 #    documentation and/or other materials provided with the distribution.
 #
 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 # ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 # SUCH DAMAGE.
 #
 # $FreeBSD$
 
 .include <src.opts.mk>
 MK_SSP=		no
+MAN=
 
 PROG?=		loader
 NEWVERSWHAT=	"BERI loader" ${MACHINE_CPUARCH}
 INSTALLFLAGS=	-b
 
 # Architecture-specific loader code
 SRCS=		start.S						\
 		main.c						\
 		devicename.c					\
 		exec.c						\
 		metadata.c					\
 		vers.c						\
 		arch.c
 
 # libstand front-ends for shared driver code
 SRCS+=		beri_console.c					\
 		beri_disk_cfi.c					\
 		beri_disk_sdcard.c
 
 # Common code with boot2
 SRCS+=		altera_jtag_uart.c				\
 		cfi.c						\
 		sdcard.c
 
 # Since we don't have a backward compatibility issue, default to this on BERI.
 CFLAGS+=	-DBOOT_PROMPT_123
 
 CFLAGS+=	-DLOADER_DISK_SUPPORT
 CFLAGS+=	-DLOADER_UFS_SUPPORT
 CFLAGS+=	-DLOADER_GZIP_SUPPORT
 CFLAGS+=	-DLOADER_BZIP2_SUPPORT
 
 #CFLAGS+=	-DLOADER_NET_SUPPORT
 #CFLAGS+=	-DLOADER_NFS_SUPPORT
 #CFLAGS+=	-DLOADER_TFTP_SUPPORT
 
 .if ${MK_FORTH} != "no"
 # Enable BootForth
 BOOT_FORTH=	yes
 CFLAGS+=	-DBOOT_FORTH -I${.CURDIR}/../../../ficl
 CFLAGS+=	-I${.CURDIR}/../../../ficl/mips
 LIBFICL=	${.OBJDIR}/../../../ficl/libficl.a
 .endif
 
 # Common code across BERI boot loader parts
 .PATH:		${.CURDIR}/../common
 CFLAGS+=	-I${.CURDIR}/../common
 
 # Always add MI sources
 .PATH:		${.CURDIR}/../../../common
 .include	"${.CURDIR}/../../../common/Makefile.inc"
 CFLAGS+=	-I${.CURDIR}/../../../common
 
 # BERI files common to boot2 and loader
 .PATH:		${.CURDIR}/../common
 CFLAGS+=	-I${.CURDIR}/../common
 
 # Loader-specific MD headers
 CFLAGS+=	-I${.CURDIR}
 
 CLEANFILES+=	vers.c loader.help
 
 # Generate code appropriate for the loader environment
 CFLAGS+=	-G0					\
 		-fno-pic				\
 		-mno-abicalls				\
 		-msoft-float				\
 		-g
 
 LDFLAGS=	-nostdlib				\
 		-static					\
 		-T ${.CURDIR}/loader.ldscript		\
 		-L${.CURDIR}				\
 		-e __start
 
 # where to get libstand from
 CFLAGS+=	-I${.CURDIR}/../../../../../lib/libstand/
 LIBSTAND=	${.OBJDIR}/../../../../../lib/libstand/libstand.a
 
 DPADD=		${LIBFICL} ${LIBSTAND}
 LDADD=		${LIBFICL} ${LIBSTAND}
 
 vers.c: ${.CURDIR}/../../../common/newvers.sh ${.CURDIR}/version
 	sh ${.CURDIR}/../../../common/newvers.sh ${.CURDIR}/version	\
 	    ${NEWVERSWHAT}
 
 loader.help: help.common help.mips
 	cat ${.ALLSRC} | \
 	    awk -f ${.CURDIR}/../../../common/merge_help.awk > ${.TARGET}
 
 .PATH: ${.CURDIR}/../../../forth
 .include	"${.CURDIR}/../../../forth/Makefile.inc"
 
 .if !exists(${DESTDIR}/boot/loader.rc)
 FILES+= loader.rc
 .endif
 
 .if !exists(${DESTDIR}/boot/menu.rc)
 FILES+= menu.rc
 .endif
 
 .if defined(LOADER_USB_SUPPORT)
 # Do garbage collection
 CFLAGS+= -ffunction-sections -fdata-sections
 CFLAGS+= -Wl,--gc-sections
 # Link USB BOOT library
 LDADD+= ${.OBJDIR}/../../../usb/libusbboot.a
 CFLAGS+= -I${.CURDIR}/../../../usb
 # Define USB SUPPORT
 CFLAGS+= -DLOADER_USB_SUPPORT
 .endif
 
 all: loader
 
 .include <bsd.prog.mk>
Index: head/sys/boot/pc98/loader/Makefile
===================================================================
--- head/sys/boot/pc98/loader/Makefile	(revision 284596)
+++ head/sys/boot/pc98/loader/Makefile	(revision 284597)
@@ -1,105 +1,106 @@
 # $FreeBSD$
 
 .include <src.opts.mk>
 MK_SSP=		no
+MAN=
 
 LOADER?=	loader
 PROG=		${LOADER}.sym
 INTERNALPROG=
 NEWVERSWHAT=	"bootstrap loader" pc98
 
 # architecture-specific loader code
 SRCS=		main.c conf.c vers.c
 .PATH:		${.CURDIR}/../../i386/loader
 
 # Enable PXE TFTP or NFS support, not both.
 .if defined(LOADER_TFTP_SUPPORT)
 CFLAGS+=	-DLOADER_TFTP_SUPPORT
 .else
 CFLAGS+=	-DLOADER_NFS_SUPPORT
 .endif
 
 # Include bcache code.
 HAVE_BCACHE=	yes
 
 # Enable PnP and ISA-PnP code.
 HAVE_PNP=	yes
 HAVE_ISABUS=	yes
 
 .if ${MK_FORTH} != "no"
 # Enable BootForth
 BOOT_FORTH=	yes
 CFLAGS+=	-DBOOT_FORTH -I${.CURDIR}/../../ficl -I${.CURDIR}/../../ficl/i386
 LIBFICL=	${.OBJDIR}/../../ficl/libficl.a
 .endif
 
 .if defined(LOADER_BZIP2_SUPPORT)
 CFLAGS+=	-DLOADER_BZIP2_SUPPORT
 .endif
 .if !defined(LOADER_NO_GZIP_SUPPORT)
 CFLAGS+=	-DLOADER_GZIP_SUPPORT
 .endif
 
 # Always add MI sources
 .PATH:		${.CURDIR}/../../common
 .include	"${.CURDIR}/../../common/Makefile.inc"
 CFLAGS+=	-I${.CURDIR}/../../common
 CFLAGS+=	-I${.CURDIR}/../../i386
 CFLAGS+=	-I.
 
 CLEANFILES=	vers.c ${LOADER} ${LOADER}.bin loader.help
 
 CFLAGS+=	-Wall
 LDFLAGS=	-static -Ttext 0x0
 
 # pc98 standalone support library
 LIBPC98=	${.OBJDIR}/../libpc98/libpc98.a
 CFLAGS+=	-I${.CURDIR}/..
 
 LIBSTAND=	${.OBJDIR}/../../libstand32/libstand.a
 
 # BTX components
 CFLAGS+=	-I${.CURDIR}/../btx/lib
 
 # Debug me!
 #CFLAGS+=	-g
 #LDFLAGS+=	-g
 
 # Pick up ../Makefile.inc early.
 .include <bsd.init.mk>
 
 vers.c:	${.CURDIR}/../../common/newvers.sh ${.CURDIR}/../../i386/loader/version
 	sh ${.CURDIR}/../../common/newvers.sh ${.CURDIR}/../../i386/loader/version ${NEWVERSWHAT}
 
 ${LOADER}: ${LOADER}.bin ${BTXLDR} ${BTXKERN}
 	btxld -v -f aout -e ${LOADER_ADDRESS} -o ${.TARGET} -l ${BTXLDR} \
 		-b ${BTXKERN} ${LOADER}.bin
 
 ${LOADER}.bin: ${LOADER}.sym
 	cp ${.ALLSRC} ${.TARGET}
 	strip -R .comment -R .note ${.TARGET}
 
 loader.help: help.common help.pc98
 	cat ${.ALLSRC} | awk -f ${.CURDIR}/../../common/merge_help.awk > ${.TARGET}
 
 FILES=	${LOADER}
 # XXX INSTALLFLAGS_loader= -b
 FILESMODE_${LOADER}= ${BINMODE} -b
 
 .PATH: ${.CURDIR}/../../forth
 .include	"${.CURDIR}/../../forth/Makefile.inc"
 
 .if !exists(${DESTDIR}/boot/loader.rc)
 FILES+=	${.CURDIR}/../../i386/loader/loader.rc
 .endif
 .if !exists(${DESTDIR}/boot/menu.rc)
 FILES+= menu.rc
 .endif
 
 # XXX crt0.o needs to be first for pxeboot(8) to work
 OBJS=	${BTXCRT}
 
 DPADD=	${LIBFICL} ${LIBPC98} ${LIBSTAND}
 LDADD=	${LIBFICL} ${LIBPC98} ${LIBSTAND}
 
 .include <bsd.prog.mk>
Index: head/sys/boot/powerpc/kboot/Makefile
===================================================================
--- head/sys/boot/powerpc/kboot/Makefile	(revision 284596)
+++ head/sys/boot/powerpc/kboot/Makefile	(revision 284597)
@@ -1,127 +1,128 @@
 # $FreeBSD$
 
 .include <src.opts.mk>
 MK_SSP=		no
+MAN=
 
 PROG=		loader.kboot
 NEWVERSWHAT=	"kboot loader" ${MACHINE_ARCH}
 BINDIR?=	/boot
 INSTALLFLAGS=	-b
 
 # Architecture-specific loader code
 SRCS=		conf.c metadata.c vers.c main.c ppc64_elf_freebsd.c
 SRCS+=		host_syscall.S hostcons.c hostdisk.c kerneltramp.S kbootfdt.c
 SRCS+=		ucmpdi2.c
 
 LOADER_DISK_SUPPORT?=	yes
 LOADER_UFS_SUPPORT?=	yes
 LOADER_CD9660_SUPPORT?=	yes
 LOADER_EXT2FS_SUPPORT?=	yes
 LOADER_NET_SUPPORT?=	yes
 LOADER_NFS_SUPPORT?=	yes
 LOADER_TFTP_SUPPORT?=	no
 LOADER_GZIP_SUPPORT?=	yes
 LOADER_FDT_SUPPORT=	yes
 LOADER_BZIP2_SUPPORT?=	no
 
 .if ${LOADER_DISK_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_DISK_SUPPORT
 .endif
 .if ${LOADER_UFS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_UFS_SUPPORT
 .endif
 .if ${LOADER_CD9660_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_CD9660_SUPPORT
 .endif
 .if ${LOADER_EXT2FS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_EXT2FS_SUPPORT
 .endif
 .if ${LOADER_GZIP_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_GZIP_SUPPORT
 .endif
 .if ${LOADER_BZIP2_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_BZIP2_SUPPORT
 .endif
 .if ${LOADER_NET_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_NET_SUPPORT
 .endif
 .if ${LOADER_NFS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_NFS_SUPPORT
 .endif
 .if ${LOADER_TFTP_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_TFTP_SUPPORT
 .endif
 .if ${LOADER_FDT_SUPPORT} == "yes"
 CFLAGS+=	-I${.CURDIR}/../../fdt
 CFLAGS+=	-I${.OBJDIR}/../../fdt
 CFLAGS+=	-I${.CURDIR}/../../../contrib/libfdt
 CFLAGS+=	-DLOADER_FDT_SUPPORT
 LIBFDT=		${.OBJDIR}/../../fdt/libfdt.a
 .endif
 
 
 .if ${MK_FORTH} != "no"
 # Enable BootForth
 BOOT_FORTH=	yes
 CFLAGS+=	-DBOOT_FORTH -I${.CURDIR}/../../ficl -I${.CURDIR}/../../ficl/powerpc
 LIBFICL=	${.OBJDIR}/../../ficl/libficl.a
 .endif
 
 # Avoid the open-close-dance for every file access as some firmwares perform
 # an auto-negotiation on every open of the network interface and thus causes
 # netbooting to take horribly long.
 CFLAGS+=	-DNETIF_OPEN_CLOSE_ONCE -mcpu=powerpc64
 
 # Always add MI sources
 .PATH:		${.CURDIR}/../../common ${.CURDIR}/../../../libkern
 .include	"${.CURDIR}/../../common/Makefile.inc"
 CFLAGS+=	-I${.CURDIR}/../../common -I${.CURDIR}/../../..
 CFLAGS+=	-I.
 
 CLEANFILES+=	vers.c loader.help
 
 CFLAGS+=	-Wall -ffreestanding -msoft-float -DAIM
 # load address. set in linker script
 RELOC?=		0x0
 CFLAGS+=	-DRELOC=${RELOC}
 
 LDFLAGS=	-nostdlib -static -T ${.CURDIR}/ldscript.powerpc
 
 # 64-bit bridge extensions
 CFLAGS+= -Wa,-mppc64bridge
 
 # Pull in common loader code
 #.PATH:		${.CURDIR}/../../ofw/common
 #.include	"${.CURDIR}/../../ofw/common/Makefile.inc"
 
 # where to get libstand from
 LIBSTAND=	${.OBJDIR}/../../libstand32/libstand.a
 CFLAGS+=	-I${.CURDIR}/../../../../lib/libstand/
 
 DPADD=		${LIBFICL} ${LIBOFW} ${LIBFDT} ${LIBSTAND}
 LDADD=		${LIBFICL} ${LIBOFW} ${LIBFDT} ${LIBSTAND}
 
 SC_DFLT_FONT=cp437
 
 font.h:
 	uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h
 
 vers.c:	${.CURDIR}/../../common/newvers.sh ${.CURDIR}/version
 	sh ${.CURDIR}/../../common/newvers.sh ${.CURDIR}/version ${NEWVERSWHAT}
 
 loader.help: help.common help.kboot ${.CURDIR}/../../fdt/help.fdt
 	cat ${.ALLSRC} | \
 	    awk -f ${.CURDIR}/../../common/merge_help.awk > ${.TARGET}
 
 .PATH: ${.CURDIR}/../../forth
 .include	"${.CURDIR}/../../forth/Makefile.inc"
 
 .if !exists(${DESTDIR}/boot/loader.rc)
 FILES+= loader.rc
 .endif
 
 .if !exists(${DESTDIR}/boot/menu.rc)
 FILES+= menu.rc
 .endif
 
 .include <bsd.prog.mk>
Index: head/sys/boot/powerpc/ofw/Makefile
===================================================================
--- head/sys/boot/powerpc/ofw/Makefile	(revision 284596)
+++ head/sys/boot/powerpc/ofw/Makefile	(revision 284597)
@@ -1,122 +1,123 @@
 # $FreeBSD$
 
 .include <src.opts.mk>
 MK_SSP=		no
+MAN=
 
 PROG=		loader
 NEWVERSWHAT=	"Open Firmware loader" ${MACHINE_ARCH}
 BINDIR?=	/boot
 INSTALLFLAGS=	-b
 
 # Architecture-specific loader code
 SRCS=		conf.c metadata.c vers.c start.c
 SRCS+=		ucmpdi2.c
 
 LOADER_DISK_SUPPORT?=	yes
 LOADER_UFS_SUPPORT?=	yes
 LOADER_CD9660_SUPPORT?=	yes
 LOADER_EXT2FS_SUPPORT?=	no
 LOADER_NET_SUPPORT?=	yes
 LOADER_NFS_SUPPORT?=	yes
 LOADER_TFTP_SUPPORT?=	no
 LOADER_GZIP_SUPPORT?=	yes
 LOADER_BZIP2_SUPPORT?=	no
 LOADER_FDT_SUPPORT?=	yes
 
 .if ${LOADER_DISK_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_DISK_SUPPORT
 .endif
 .if ${LOADER_UFS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_UFS_SUPPORT
 .endif
 .if ${LOADER_CD9660_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_CD9660_SUPPORT
 .endif
 .if ${LOADER_EXT2FS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_EXT2FS_SUPPORT
 .endif
 .if ${LOADER_GZIP_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_GZIP_SUPPORT
 .endif
 .if ${LOADER_BZIP2_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_BZIP2_SUPPORT
 .endif
 .if ${LOADER_NET_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_NET_SUPPORT
 .endif
 .if ${LOADER_NFS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_NFS_SUPPORT
 .endif
 .if ${LOADER_TFTP_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_TFTP_SUPPORT
 .endif
 .if ${LOADER_FDT_SUPPORT} == "yes"
 SRCS+=		ofwfdt.c
 CFLAGS+=	-I${.CURDIR}/../../fdt
 CFLAGS+=	-I${.OBJDIR}/../../fdt
 CFLAGS+=	-I${.CURDIR}/../../../contrib/libfdt
 CFLAGS+=	-DLOADER_FDT_SUPPORT
 LIBFDT=		${.OBJDIR}/../../fdt/libfdt.a
 .endif
 
 .if ${MK_FORTH} != "no"
 # Enable BootForth
 BOOT_FORTH=	yes
 CFLAGS+=	-DBOOT_FORTH -I${.CURDIR}/../../ficl -I${.CURDIR}/../../ficl/powerpc
 LIBFICL=	${.OBJDIR}/../../ficl/libficl.a
 .endif
 
 # Avoid the open-close-dance for every file access as some firmwares perform
 # an auto-negotiation on every open of the network interface and thus causes
 # netbooting to take horribly long.
 CFLAGS+=	-DNETIF_OPEN_CLOSE_ONCE
 
 # Always add MI sources
 .PATH:		${.CURDIR}/../../common ${.CURDIR}/../../../libkern
 .include	"${.CURDIR}/../../common/Makefile.inc"
 CFLAGS+=	-I${.CURDIR}/../../common -I${.CURDIR}/../../..
 CFLAGS+=	-I.
 
 CLEANFILES+=	vers.c loader.help
 
 CFLAGS+=	-ffreestanding -msoft-float
 # load address. set in linker script
 RELOC?=		0x1C00000
 CFLAGS+=	-DRELOC=${RELOC}
 
 LDFLAGS=	-nostdlib -static -T ${.CURDIR}/ldscript.powerpc
 
 # Pull in common loader code
 .PATH:		${.CURDIR}/../../ofw/common
 .include	"${.CURDIR}/../../ofw/common/Makefile.inc"
 
 # Open Firmware standalone support library
 LIBOFW=		${.OBJDIR}/../../ofw/libofw/libofw.a
 CFLAGS+=	-I${.CURDIR}/../../ofw/libofw
 
 # where to get libstand from
 LIBSTAND=	${.OBJDIR}/../../libstand32/libstand.a
 CFLAGS+=	-I${.CURDIR}/../../../../lib/libstand/
 
 DPADD=		${LIBFICL} ${LIBOFW} ${LIBFDT} ${LIBSTAND}
 LDADD=		${LIBFICL} ${LIBOFW} ${LIBFDT} ${LIBSTAND}
 
 vers.c:	${.CURDIR}/../../common/newvers.sh ${.CURDIR}/version
 	sh ${.CURDIR}/../../common/newvers.sh ${.CURDIR}/version ${NEWVERSWHAT}
 
 loader.help: help.common help.ofw ${.CURDIR}/../../fdt/help.fdt
 	cat ${.ALLSRC} | \
 	    awk -f ${.CURDIR}/../../common/merge_help.awk > ${.TARGET}
 
 .PATH: ${.CURDIR}/../../forth
 .include	"${.CURDIR}/../../forth/Makefile.inc"
 
 .if !exists(${DESTDIR}/boot/loader.rc)
 FILES+= loader.rc
 .endif
 
 .if !exists(${DESTDIR}/boot/menu.rc)
 FILES+= menu.rc
 .endif
 
 .include <bsd.prog.mk>
Index: head/sys/boot/powerpc/ps3/Makefile
===================================================================
--- head/sys/boot/powerpc/ps3/Makefile	(revision 284596)
+++ head/sys/boot/powerpc/ps3/Makefile	(revision 284597)
@@ -1,124 +1,125 @@
 # $FreeBSD$
 
 .include <src.opts.mk>
 MK_SSP=		no
+MAN=
 
 PROG=		loader.ps3
 NEWVERSWHAT=	"Playstation 3 loader" ${MACHINE_ARCH}
 BINDIR?=	/boot
 INSTALLFLAGS=	-b
 
 # Architecture-specific loader code
 SRCS=		start.S conf.c metadata.c vers.c main.c devicename.c ppc64_elf_freebsd.c
 SRCS+=		lv1call.S ps3cons.c font.h ps3mmu.c ps3net.c ps3repo.c \
 		ps3stor.c ps3disk.c ps3cdrom.c
 SRCS+=		ucmpdi2.c
 
 LOADER_DISK_SUPPORT?=	yes
 LOADER_UFS_SUPPORT?=	yes
 LOADER_CD9660_SUPPORT?=	yes
 LOADER_EXT2FS_SUPPORT?=	yes
 LOADER_NET_SUPPORT?=	yes
 LOADER_NFS_SUPPORT?=	yes
 LOADER_TFTP_SUPPORT?=	no
 LOADER_GZIP_SUPPORT?=	yes
 LOADER_FDT_SUPPORT?=	no
 LOADER_BZIP2_SUPPORT?=	no
 
 .if ${LOADER_DISK_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_DISK_SUPPORT
 .endif
 .if ${LOADER_UFS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_UFS_SUPPORT
 .endif
 .if ${LOADER_CD9660_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_CD9660_SUPPORT
 .endif
 .if ${LOADER_EXT2FS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_EXT2FS_SUPPORT
 .endif
 .if ${LOADER_GZIP_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_GZIP_SUPPORT
 .endif
 .if ${LOADER_BZIP2_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_BZIP2_SUPPORT
 .endif
 .if ${LOADER_NET_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_NET_SUPPORT
 .endif
 .if ${LOADER_NFS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_NFS_SUPPORT
 .endif
 .if ${LOADER_TFTP_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_TFTP_SUPPORT
 .endif
 .if ${LOADER_FDT_SUPPORT} == "yes"
 CFLAGS+=	-I${.CURDIR}/../../fdt
 CFLAGS+=	-I${.OBJDIR}/../../fdt
 CFLAGS+=	-DLOADER_FDT_SUPPORT
 LIBFDT=		${.OBJDIR}/../../fdt/libfdt.a
 .endif
 
 
 .if ${MK_FORTH} != "no"
 # Enable BootForth
 BOOT_FORTH=	yes
 CFLAGS+=	-DBOOT_FORTH -I${.CURDIR}/../../ficl -I${.CURDIR}/../../ficl/powerpc
 LIBFICL=	${.OBJDIR}/../../ficl/libficl.a
 .endif
 
 # Avoid the open-close-dance for every file access as some firmwares perform
 # an auto-negotiation on every open of the network interface and thus causes
 # netbooting to take horribly long.
 CFLAGS+=	-DNETIF_OPEN_CLOSE_ONCE -mcpu=powerpc64
 
 # Always add MI sources
 .PATH:		${.CURDIR}/../../common ${.CURDIR}/../../../libkern
 .include	"${.CURDIR}/../../common/Makefile.inc"
 CFLAGS+=	-I${.CURDIR}/../../common -I${.CURDIR}/../../..
 CFLAGS+=	-I.
 
 CLEANFILES+=	vers.c loader.help
 
 CFLAGS+=	-Wall -ffreestanding -msoft-float -DAIM
 # load address. set in linker script
 RELOC?=		0x0
 CFLAGS+=	-DRELOC=${RELOC}
 
 LDFLAGS=	-nostdlib -static -T ${.CURDIR}/ldscript.powerpc
 
 # Pull in common loader code
 #.PATH:		${.CURDIR}/../../ofw/common
 #.include	"${.CURDIR}/../../ofw/common/Makefile.inc"
 
 # where to get libstand from
 LIBSTAND=	${.OBJDIR}/../../libstand32/libstand.a
 CFLAGS+=	-I${.CURDIR}/../../../../lib/libstand/
 
 DPADD=		${LIBFICL} ${LIBOFW} ${LIBSTAND}
 LDADD=		${LIBFICL} ${LIBOFW} ${LIBSTAND}
 
 SC_DFLT_FONT=cp437
 
 font.h:
 	uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h
 
 vers.c:	${.CURDIR}/../../common/newvers.sh ${.CURDIR}/version
 	sh ${.CURDIR}/../../common/newvers.sh ${.CURDIR}/version ${NEWVERSWHAT}
 
 loader.help: help.common help.ps3 ${.CURDIR}/../../fdt/help.fdt
 	cat ${.ALLSRC} | \
 	    awk -f ${.CURDIR}/../../common/merge_help.awk > ${.TARGET}
 
 .PATH: ${.CURDIR}/../../forth
 .include	"${.CURDIR}/../../forth/Makefile.inc"
 
 .if !exists(${DESTDIR}/boot/loader.rc)
 FILES+= loader.rc
 .endif
 
 .if !exists(${DESTDIR}/boot/menu.rc)
 FILES+= menu.rc
 .endif
 
 .include <bsd.prog.mk>
Index: head/sys/boot/sparc64/loader/Makefile
===================================================================
--- head/sys/boot/sparc64/loader/Makefile	(revision 284596)
+++ head/sys/boot/sparc64/loader/Makefile	(revision 284597)
@@ -1,109 +1,110 @@
 # $FreeBSD$
 
 .include <src.opts.mk>
 MK_SSP=		no
+MAN=
 
 PROG?=		loader
 NEWVERSWHAT?=	"bootstrap loader" sparc64
 INSTALLFLAGS=	-b
 
 # Architecture-specific loader code
 SRCS=		locore.S main.c metadata.c vers.c
 
 LOADER_DISK_SUPPORT?=	yes
 LOADER_UFS_SUPPORT?=	yes
 LOADER_CD9660_SUPPORT?=	yes
 LOADER_ZFS_SUPPORT?=	no
 LOADER_NET_SUPPORT?=	yes
 LOADER_NFS_SUPPORT?=	yes
 LOADER_TFTP_SUPPORT?=	yes
 LOADER_GZIP_SUPPORT?=	yes
 LOADER_BZIP2_SUPPORT?=	no
 LOADER_DEBUG?=		no
 
 .if ${LOADER_DEBUG} == "yes"
 CFLAGS+=	-DLOADER_DEBUG
 .endif
 .if ${LOADER_DISK_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_DISK_SUPPORT
 .endif
 .if ${LOADER_UFS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_UFS_SUPPORT
 .endif
 .if ${LOADER_CD9660_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_CD9660_SUPPORT
 .endif
 .if ${LOADER_ZFS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_ZFS_SUPPORT
 CFLAGS+=	-I${.CURDIR}/../../zfs
 CFLAGS+=	-I${.CURDIR}/../../../cddl/boot/zfs
 LIBZFSBOOT=	${.OBJDIR}/../../zfs/libzfsboot.a
 .endif
 .if ${LOADER_GZIP_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_GZIP_SUPPORT
 .endif
 .if ${LOADER_BZIP2_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_BZIP2_SUPPORT
 .endif
 .if ${LOADER_NET_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_NET_SUPPORT
 .endif
 .if ${LOADER_NFS_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_NFS_SUPPORT
 .endif
 .if ${LOADER_TFTP_SUPPORT} == "yes"
 CFLAGS+=	-DLOADER_TFTP_SUPPORT
 .endif
 
 .if ${MK_FORTH} != "no"
 # Enable BootForth
 BOOT_FORTH=	yes
 CFLAGS+=	-DBOOT_FORTH -I${.CURDIR}/../../ficl
 CFLAGS+=	-I${.CURDIR}/../../ficl/sparc64
 LIBFICL=	${.OBJDIR}/../../ficl/libficl.a
 .endif
 
 # Always add MI sources
 .PATH:		${.CURDIR}/../../common
 .include	"${.CURDIR}/../../common/Makefile.inc"
 CFLAGS+=	-I${.CURDIR}/../../common
 CFLAGS+=	-I.
 # Avoid the open-close-dance for every file access as some firmwares perform
 # an auto-negotiation on every open of the network interface and thus causes
 # netbooting to take horribly long.
 CFLAGS+=	-DNETIF_OPEN_CLOSE_ONCE
 
 CLEANFILES+=	vers.c loader.help
 
 LDFLAGS=	-static
 
 # Open Firmware standalone support library
 LIBOFW=		${.OBJDIR}/../../ofw/libofw/libofw.a
 CFLAGS+=	-I${.CURDIR}/../../ofw/libofw/
 
 # where to get libstand from
 CFLAGS+=	-I${.CURDIR}/../../../../lib/libstand/
 
 DPADD=		${LIBFICL} ${LIBZFSBOOT} ${LIBOFW} ${LIBSTAND}
 LDADD=		${LIBFICL} ${LIBZFSBOOT} ${LIBOFW} -lstand
 
 vers.c:	${.CURDIR}/../../common/newvers.sh ${.CURDIR}/../loader/version
 	sh ${.CURDIR}/../../common/newvers.sh ${.CURDIR}/../loader/version \
 	    ${NEWVERSWHAT}
 
 loader.help: help.common help.sparc64
 	cat ${.ALLSRC} | \
 	    awk -f ${.CURDIR}/../../common/merge_help.awk > ${.TARGET}
 
 .PATH: ${.CURDIR}/../../forth
 .include	"${.CURDIR}/../../forth/Makefile.inc"
 
 .if !exists(${DESTDIR}/boot/loader.rc)
 FILES+= loader.rc
 .endif
 
 .if !exists(${DESTDIR}/boot/menu.rc)
 FILES+= menu.rc
 .endif
 
 .include <bsd.prog.mk>