Index: head/sys/net80211/ieee80211_scan.c =================================================================== --- head/sys/net80211/ieee80211_scan.c (revision 284142) +++ head/sys/net80211/ieee80211_scan.c (revision 284143) @@ -1,668 +1,665 @@ /*- * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 scanning support. */ #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include /* XXX until it's implemented as attach ops */ #include #include /* * Roaming-related defaults. RSSI thresholds are as returned by the * driver (.5dBm). Transmit rate thresholds are IEEE rate codes (i.e * .5M units) or MCS. */ /* rssi thresholds */ #define ROAM_RSSI_11A_DEFAULT 14 /* 11a bss */ #define ROAM_RSSI_11B_DEFAULT 14 /* 11b bss */ #define ROAM_RSSI_11BONLY_DEFAULT 14 /* 11b-only bss */ /* transmit rate thresholds */ #define ROAM_RATE_11A_DEFAULT 2*12 /* 11a bss */ #define ROAM_RATE_11B_DEFAULT 2*5 /* 11b bss */ #define ROAM_RATE_11BONLY_DEFAULT 2*1 /* 11b-only bss */ #define ROAM_RATE_HALF_DEFAULT 2*6 /* half-width 11a/g bss */ #define ROAM_RATE_QUARTER_DEFAULT 2*3 /* quarter-width 11a/g bss */ #define ROAM_MCS_11N_DEFAULT (1 | IEEE80211_RATE_MCS) /* 11n bss */ void ieee80211_scan_attach(struct ieee80211com *ic) { - /* - * For now, the swscan module does both the - * allocation (so it can pad it) and sets up the net80211 - * bits. - * - * I'll split this stuff later. + * If there's no scan method pointer, attach the + * swscan set as a default. */ - ieee80211_swscan_attach(ic); + if (ic->ic_scan_methods == NULL) + ieee80211_swscan_attach(ic); + else + ic->ic_scan_methods->sc_attach(ic); } void ieee80211_scan_detach(struct ieee80211com *ic) { /* * Ideally we'd do the ss_ops detach call here; - * but then ieee80211_swscan_detach would need - * to be split in two. + * but then sc_detach() would need to be split in two. * * I'll do that later. */ - ieee80211_swscan_detach(ic); + ic->ic_scan_methods->sc_detach(ic); } static const struct ieee80211_roamparam defroam[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_11A] = { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_11G] = { .rssi = ROAM_RSSI_11B_DEFAULT, .rate = ROAM_RATE_11B_DEFAULT }, [IEEE80211_MODE_11B] = { .rssi = ROAM_RSSI_11BONLY_DEFAULT, .rate = ROAM_RATE_11BONLY_DEFAULT }, [IEEE80211_MODE_TURBO_A]= { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_TURBO_G]= { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_STURBO_A]={ .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_HALF] = { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_HALF_DEFAULT }, [IEEE80211_MODE_QUARTER]= { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_QUARTER_DEFAULT }, [IEEE80211_MODE_11NA] = { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_MCS_11N_DEFAULT }, [IEEE80211_MODE_11NG] = { .rssi = ROAM_RSSI_11B_DEFAULT, .rate = ROAM_MCS_11N_DEFAULT }, }; void ieee80211_scan_vattach(struct ieee80211vap *vap) { + struct ieee80211com *ic = vap->iv_ic; + vap->iv_bgscanidle = (IEEE80211_BGSCAN_IDLE_DEFAULT*1000)/hz; vap->iv_bgscanintvl = IEEE80211_BGSCAN_INTVAL_DEFAULT*hz; vap->iv_scanvalid = IEEE80211_SCAN_VALID_DEFAULT*hz; vap->iv_roaming = IEEE80211_ROAMING_AUTO; memcpy(vap->iv_roamparms, defroam, sizeof(defroam)); - ieee80211_swscan_vattach(vap); + ic->ic_scan_methods->sc_vattach(vap); } void ieee80211_scan_vdetach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_LOCK(ic); ss = ic->ic_scan; - ieee80211_swscan_vdetach(vap); + ic->ic_scan_methods->sc_vdetach(vap); if (ss != NULL && ss->ss_vap == vap) { if (ss->ss_ops != NULL) { ss->ss_ops->scan_detach(ss); ss->ss_ops = NULL; } ss->ss_vap = NULL; } IEEE80211_UNLOCK(ic); } /* * Simple-minded scanner module support. */ static const char *scan_modnames[IEEE80211_OPMODE_MAX] = { "wlan_scan_sta", /* IEEE80211_M_IBSS */ "wlan_scan_sta", /* IEEE80211_M_STA */ "wlan_scan_wds", /* IEEE80211_M_WDS */ "wlan_scan_sta", /* IEEE80211_M_AHDEMO */ "wlan_scan_ap", /* IEEE80211_M_HOSTAP */ "wlan_scan_monitor", /* IEEE80211_M_MONITOR */ "wlan_scan_sta", /* IEEE80211_M_MBSS */ }; static const struct ieee80211_scanner *scanners[IEEE80211_OPMODE_MAX]; const struct ieee80211_scanner * ieee80211_scanner_get(enum ieee80211_opmode mode) { if (mode >= IEEE80211_OPMODE_MAX) return NULL; if (scanners[mode] == NULL) ieee80211_load_module(scan_modnames[mode]); return scanners[mode]; } void ieee80211_scanner_register(enum ieee80211_opmode mode, const struct ieee80211_scanner *scan) { if (mode >= IEEE80211_OPMODE_MAX) return; scanners[mode] = scan; } void ieee80211_scanner_unregister(enum ieee80211_opmode mode, const struct ieee80211_scanner *scan) { if (mode >= IEEE80211_OPMODE_MAX) return; if (scanners[mode] == scan) scanners[mode] = NULL; } void ieee80211_scanner_unregister_all(const struct ieee80211_scanner *scan) { int m; for (m = 0; m < IEEE80211_OPMODE_MAX; m++) if (scanners[m] == scan) scanners[m] = NULL; } /* * Update common scanner state to reflect the current * operating mode. This is called when the state machine * is transitioned to RUN state w/o scanning--e.g. when * operating in monitor mode. The purpose of this is to * ensure later callbacks find ss_ops set to properly * reflect current operating mode. */ void ieee80211_scan_update_locked(struct ieee80211vap *vap, const struct ieee80211_scanner *scan) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); #ifdef IEEE80211_DEBUG if (ss->ss_vap != vap || ss->ss_ops != scan) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: current scanner is <%s:%s>, switch to <%s:%s>\n", __func__, ss->ss_vap != NULL ? ss->ss_vap->iv_ifp->if_xname : "none", ss->ss_vap != NULL ? ieee80211_opmode_name[ss->ss_vap->iv_opmode] : "none", vap->iv_ifp->if_xname, ieee80211_opmode_name[vap->iv_opmode]); } #endif ss->ss_vap = vap; if (ss->ss_ops != scan) { /* * Switch scanners; detach old, attach new. Special * case where a single scan module implements multiple * policies by using different scan ops but a common * core. We assume if the old and new attach methods * are identical then it's ok to just change ss_ops * and not flush the internal state of the module. */ if (scan == NULL || ss->ss_ops == NULL || ss->ss_ops->scan_attach != scan->scan_attach) { if (ss->ss_ops != NULL) ss->ss_ops->scan_detach(ss); if (scan != NULL && !scan->scan_attach(ss)) { /* XXX attach failure */ /* XXX stat+msg */ scan = NULL; } } ss->ss_ops = scan; } } void ieee80211_scan_dump_channels(const struct ieee80211_scan_state *ss) { struct ieee80211com *ic = ss->ss_ic; const char *sep; int i; sep = ""; for (i = ss->ss_next; i < ss->ss_last; i++) { const struct ieee80211_channel *c = ss->ss_chans[i]; printf("%s%u%c", sep, ieee80211_chan2ieee(ic, c), ieee80211_channel_type_char(c)); sep = ", "; } } #ifdef IEEE80211_DEBUG void ieee80211_scan_dump(struct ieee80211_scan_state *ss) { struct ieee80211vap *vap = ss->ss_vap; if_printf(vap->iv_ifp, "scan set "); ieee80211_scan_dump_channels(ss); printf(" dwell min %lums max %lums\n", ticks_to_msecs(ss->ss_mindwell), ticks_to_msecs(ss->ss_maxdwell)); } #endif /* IEEE80211_DEBUG */ void ieee80211_scan_copy_ssid(struct ieee80211vap *vap, struct ieee80211_scan_state *ss, int nssid, const struct ieee80211_scan_ssid ssids[]) { if (nssid > IEEE80211_SCAN_MAX_SSID) { /* XXX printf */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: too many ssid %d, ignoring all of them\n", __func__, nssid); return; } memcpy(ss->ss_ssid, ssids, nssid * sizeof(ssids[0])); ss->ss_nssid = nssid; } /* * Start a scan unless one is already going. */ int ieee80211_start_scan(struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { const struct ieee80211_scanner *scan; + struct ieee80211com *ic = vap->iv_ic; scan = ieee80211_scanner_get(vap->iv_opmode); if (scan == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no scanner support for %s mode\n", __func__, ieee80211_opmode_name[vap->iv_opmode]); /* XXX stat */ return 0; } - /* XXX ops */ - return ieee80211_swscan_start_scan(scan, vap, flags, duration, + return ic->ic_scan_methods->sc_start_scan(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); } /* * Check the scan cache for an ap/channel to use; if that * fails then kick off a new scan. */ int ieee80211_check_scan(struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; const struct ieee80211_scanner *scan; int result; scan = ieee80211_scanner_get(vap->iv_opmode); if (scan == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no scanner support for %s mode\n", __func__, vap->iv_opmode); /* XXX stat */ return 0; } /* * Check if there's a list of scan candidates already. * XXX want more than the ap we're currently associated with */ IEEE80211_LOCK(ic); IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan, %s%s%s%s%s\n" , __func__ , flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive" , flags & IEEE80211_SCAN_FLUSH ? "flush" : "append" , flags & IEEE80211_SCAN_NOPICK ? ", nopick" : "" , flags & IEEE80211_SCAN_NOJOIN ? ", nojoin" : "" , flags & IEEE80211_SCAN_PICK1ST ? ", pick1st" : "" , flags & IEEE80211_SCAN_ONCE ? ", once" : "" ); if (ss->ss_ops != scan) { /* XXX re-use cache contents? e.g. adhoc<->sta */ flags |= IEEE80211_SCAN_FLUSH; } /* * XXX TODO: separate things out a bit better. - * XXX TODO: ops */ ieee80211_scan_update_locked(vap, scan); - result = ieee80211_swscan_check_scan(scan, vap, flags, duration, + result = ic->ic_scan_methods->sc_check_scan(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); IEEE80211_UNLOCK(ic); return (result); } /* * Check the scan cache for an ap/channel to use; if that fails * then kick off a scan using the current settings. */ int ieee80211_check_scan_current(struct ieee80211vap *vap) { return ieee80211_check_scan(vap, IEEE80211_SCAN_ACTIVE, IEEE80211_SCAN_FOREVER, 0, 0, vap->iv_des_nssid, vap->iv_des_ssid); } /* * Restart a previous scan. If the previous scan completed * then we start again using the existing channel list. */ int ieee80211_bg_scan(struct ieee80211vap *vap, int flags) { + struct ieee80211com *ic = vap->iv_ic; const struct ieee80211_scanner *scan; // IEEE80211_UNLOCK_ASSERT(sc); scan = ieee80211_scanner_get(vap->iv_opmode); if (scan == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no scanner support for %s mode\n", __func__, vap->iv_opmode); /* XXX stat */ return 0; } /* * XXX TODO: pull apart the bgscan logic into whatever * belongs here and whatever belongs in the software * scanner. - * - * XXX TODO: ops */ - return (ieee80211_swscan_bg_scan(scan, vap, flags)); + return (ic->ic_scan_methods->sc_bg_scan(scan, vap, flags)); } /* * Cancel any scan currently going on for the specified vap. */ void ieee80211_cancel_scan(struct ieee80211vap *vap) { + struct ieee80211com *ic = vap->iv_ic; - /* XXX TODO: ops */ - ieee80211_swscan_cancel_scan(vap); + ic->ic_scan_methods->sc_cancel_scan(vap); } /* * Cancel any scan currently going on. */ void ieee80211_cancel_anyscan(struct ieee80211vap *vap) { + struct ieee80211com *ic = vap->iv_ic; - /* XXX TODO: ops */ - ieee80211_swscan_cancel_anyscan(vap); + ic->ic_scan_methods->sc_cancel_anyscan(vap); } /* * Public access to scan_next for drivers that manage * scanning themselves (e.g. for firmware-based devices). */ void ieee80211_scan_next(struct ieee80211vap *vap) { + struct ieee80211com *ic = vap->iv_ic; - /* XXX TODO: ops */ - ieee80211_swscan_scan_next(vap); + ic->ic_scan_methods->sc_scan_next(vap); } /* * Public access to scan_next for drivers that are not able to scan single * channels (e.g. for firmware-based devices). */ void ieee80211_scan_done(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__); IEEE80211_LOCK(ic); ss = ic->ic_scan; ss->ss_next = ss->ss_last; /* all channels are complete */ - /* XXX TODO: ops */ - ieee80211_swscan_scan_done(vap); + ic->ic_scan_methods->sc_scan_done(vap); IEEE80211_UNLOCK(ic); } /* * Probe the curent channel, if allowed, while scanning. * If the channel is not marked passive-only then send * a probe request immediately. Otherwise mark state and * listen for beacons on the channel; if we receive something * then we'll transmit a probe request. */ void ieee80211_probe_curchan(struct ieee80211vap *vap, int force) { struct ieee80211com *ic = vap->iv_ic; if ((ic->ic_curchan->ic_flags & IEEE80211_CHAN_PASSIVE) && !force) { ic->ic_flags_ext |= IEEE80211_FEXT_PROBECHAN; return; } - /* XXX TODO: ops */ - ieee80211_swscan_probe_curchan(vap, force); + ic->ic_scan_methods->sc_scan_probe_curchan(vap, force); } #ifdef IEEE80211_DEBUG static void dump_country(const uint8_t *ie) { const struct ieee80211_country_ie *cie = (const struct ieee80211_country_ie *) ie; int i, nbands, schan, nchan; if (cie->len < 3) { printf(" ", cie->len); return; } printf(" country [%c%c%c", cie->cc[0], cie->cc[1], cie->cc[2]); nbands = (cie->len - 3) / sizeof(cie->band[0]); for (i = 0; i < nbands; i++) { schan = cie->band[i].schan; nchan = cie->band[i].nchan; if (nchan != 1) printf(" %u-%u,%u", schan, schan + nchan-1, cie->band[i].maxtxpwr); else printf(" %u,%u", schan, cie->band[i].maxtxpwr); } printf("]"); } void ieee80211_scan_dump_probe_beacon(uint8_t subtype, int isnew, const uint8_t mac[IEEE80211_ADDR_LEN], const struct ieee80211_scanparams *sp, int rssi) { printf("[%s] %s%s on chan %u (bss chan %u) ", ether_sprintf(mac), isnew ? "new " : "", ieee80211_mgt_subtype_name[subtype >> IEEE80211_FC0_SUBTYPE_SHIFT], sp->chan, sp->bchan); ieee80211_print_essid(sp->ssid + 2, sp->ssid[1]); printf(" rssi %d\n", rssi); if (isnew) { printf("[%s] caps 0x%x bintval %u erp 0x%x", ether_sprintf(mac), sp->capinfo, sp->bintval, sp->erp); if (sp->country != NULL) dump_country(sp->country); printf("\n"); } } #endif /* IEEE80211_DEBUG */ /* * Process a beacon or probe response frame. */ void ieee80211_add_scan(struct ieee80211vap *vap, struct ieee80211_channel *curchan, const struct ieee80211_scanparams *sp, const struct ieee80211_frame *wh, int subtype, int rssi, int noise) { + struct ieee80211com *ic = vap->iv_ic; - return (ieee80211_swscan_add_scan(vap, curchan, sp, wh, subtype, + return (ic->ic_scan_methods->sc_add_scan(vap, curchan, sp, wh, subtype, rssi, noise)); } /* * Timeout/age scan cache entries; called from sta timeout * timer (XXX should be self-contained). */ void ieee80211_scan_timeout(struct ieee80211com *ic) { struct ieee80211_scan_state *ss = ic->ic_scan; if (ss->ss_ops != NULL) ss->ss_ops->scan_age(ss); } /* * Mark a scan cache entry after a successful associate. */ void ieee80211_scan_assoc_success(struct ieee80211vap *vap, const uint8_t mac[]) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_SCAN, mac, "%s", __func__); ss->ss_ops->scan_assoc_success(ss, mac); } } /* * Demerit a scan cache entry after failing to associate. */ void ieee80211_scan_assoc_fail(struct ieee80211vap *vap, const uint8_t mac[], int reason) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_SCAN, mac, "%s: reason %u", __func__, reason); ss->ss_ops->scan_assoc_fail(ss, mac, reason); } } /* * Iterate over the contents of the scan cache. */ void ieee80211_scan_iterate(struct ieee80211vap *vap, ieee80211_scan_iter_func *f, void *arg) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL) ss->ss_ops->scan_iterate(ss, f, arg); } /* * Flush the contents of the scan cache. */ void ieee80211_scan_flush(struct ieee80211vap *vap) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL && ss->ss_vap == vap) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s\n", __func__); ss->ss_ops->scan_flush(ss); } } /* * Check the scan cache for an ap/channel to use; if that * fails then kick off a new scan. */ struct ieee80211_channel * ieee80211_scan_pickchannel(struct ieee80211com *ic, int flags) { struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); if (ss == NULL || ss->ss_ops == NULL || ss->ss_vap == NULL) { /* XXX printf? */ return NULL; } if (ss->ss_ops->scan_pickchan == NULL) { IEEE80211_DPRINTF(ss->ss_vap, IEEE80211_MSG_SCAN, "%s: scan module does not support picking a channel, " "opmode %s\n", __func__, ss->ss_vap->iv_opmode); return NULL; } return ss->ss_ops->scan_pickchan(ss, flags); } Index: head/sys/net80211/ieee80211_scan.h =================================================================== --- head/sys/net80211/ieee80211_scan.h (revision 284142) +++ head/sys/net80211/ieee80211_scan.h (revision 284143) @@ -1,314 +1,347 @@ /*- * Copyright (c) 2005-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_SCAN_H_ #define _NET80211_IEEE80211_SCAN_H_ /* * 802.11 scanning support. * * Scanning is the procedure by which a station locates a bss to join * (infrastructure/ibss mode), or a channel to use (when operating as * an ap or ibss master). Scans are either "active" or "passive". An * active scan causes one or more probe request frames to be sent on * visiting each channel. A passive request causes each channel in the * scan set to be visited but no frames to be transmitted; the station * only listens for traffic. Note that active scanning may still need * to listen for traffic before sending probe request frames depending * on regulatory constraints; the 802.11 layer handles this by generating * a callback when scanning on a ``passive channel'' when the * IEEE80211_FEXT_PROBECHAN flag is set. * * A scan operation involves constructing a set of channels to inspect * (the scan set), visiting each channel and collecting information * (e.g. what bss are present), and then analyzing the results to make * decisions like which bss to join. This process needs to be as fast * as possible so we do things like intelligently construct scan sets * and dwell on a channel only as long as necessary. The scan code also * maintains a cache of recent scan results and uses it to bypass scanning * whenever possible. The scan cache is also used to enable roaming * between access points when operating in infrastructure mode. * * Scanning is handled with pluggable modules that implement "policy" * per-operating mode. The core scanning support provides an * instrastructure to support these modules and exports a common api * to the rest of the 802.11 layer. Policy modules decide what * channels to visit, what state to record to make decisions (e.g. ap * mode scanning for auto channel selection keeps significantly less * state than sta mode scanning for an ap to associate to), and selects * the final station/channel to return as the result of a scan. * * Scanning is done synchronously when initially bringing a vap to an * operational state and optionally in the background to maintain the * scan cache for doing roaming and rogue ap monitoring. Scanning is * not tied to the 802.11 state machine that governs vaps though there * is linkage to the IEEE80211_SCAN state. Only one vap at a time may * be scanning; this scheduling policy is handled in ieee80211_new_state * and is invisible to the scanning code. */ #define IEEE80211_SCAN_MAX IEEE80211_CHAN_MAX struct ieee80211_scanner; /* scan policy state */ struct ieee80211_scan_ssid { int len; /* length in bytes */ uint8_t ssid[IEEE80211_NWID_LEN]; /* ssid contents */ }; #define IEEE80211_SCAN_MAX_SSID 1 /* max # ssid's to probe */ /* + * High-level implementation visible to ieee80211_scan.[ch]. + * + * The default scanner (ieee80211_scan_sw.[ch]) implements a software + * driven scanner. Firmware driven scanning needs a different set of + * behaviours. + */ +struct ieee80211_scan_methods { + void (*sc_attach)(struct ieee80211com *); + void (*sc_detach)(struct ieee80211com *); + void (*sc_vattach)(struct ieee80211vap *); + void (*sc_vdetach)(struct ieee80211vap *); + void (*sc_set_scan_duration)(struct ieee80211vap *, u_int); + int (*sc_start_scan)(const struct ieee80211_scanner *, + struct ieee80211vap *, int, u_int, u_int, u_int, u_int, + const struct ieee80211_scan_ssid ssids[]); + int (*sc_check_scan)(const struct ieee80211_scanner *, + struct ieee80211vap *, int, u_int, u_int, u_int, u_int, + const struct ieee80211_scan_ssid ssids[]); + int (*sc_bg_scan)(const struct ieee80211_scanner *, + struct ieee80211vap *, int); + void (*sc_cancel_scan)(struct ieee80211vap *); + void (*sc_cancel_anyscan)(struct ieee80211vap *); + void (*sc_scan_next)(struct ieee80211vap *); + void (*sc_scan_done)(struct ieee80211vap *); + void (*sc_scan_probe_curchan)(struct ieee80211vap *, int); + void (*sc_add_scan)(struct ieee80211vap *, + struct ieee80211_channel *, + const struct ieee80211_scanparams *, + const struct ieee80211_frame *, + int, int, int); +}; + +/* * Scan state visible to the 802.11 layer. Scan parameters and * results are stored in this data structure. The ieee80211_scan_state * structure is extended with space that is maintained private to * the core scanning support. We allocate one instance and link it * to the ieee80211com structure; then share it between all associated * vaps. We could allocate multiple of these, e.g. to hold multiple * scan results, but this is sufficient for current needs. */ struct ieee80211_scan_state { struct ieee80211vap *ss_vap; struct ieee80211com *ss_ic; const struct ieee80211_scanner *ss_ops; /* policy hookup, see below */ void *ss_priv; /* scanner private state */ uint16_t ss_flags; #define IEEE80211_SCAN_NOPICK 0x0001 /* scan only, no selection */ #define IEEE80211_SCAN_ACTIVE 0x0002 /* active scan (probe req) */ #define IEEE80211_SCAN_PICK1ST 0x0004 /* ``hey sailor'' mode */ #define IEEE80211_SCAN_BGSCAN 0x0008 /* bg scan, exit ps at end */ #define IEEE80211_SCAN_ONCE 0x0010 /* do one complete pass */ #define IEEE80211_SCAN_NOBCAST 0x0020 /* no broadcast probe req */ #define IEEE80211_SCAN_NOJOIN 0x0040 /* no auto-sequencing */ #define IEEE80211_SCAN_GOTPICK 0x1000 /* got candidate, can stop */ uint8_t ss_nssid; /* # ssid's to probe/match */ struct ieee80211_scan_ssid ss_ssid[IEEE80211_SCAN_MAX_SSID]; /* ssid's to probe/match */ /* ordered channel set */ struct ieee80211_channel *ss_chans[IEEE80211_SCAN_MAX]; uint16_t ss_next; /* ix of next chan to scan */ uint16_t ss_last; /* ix+1 of last chan to scan */ unsigned long ss_mindwell; /* min dwell on channel */ unsigned long ss_maxdwell; /* max dwell on channel */ }; /* * The upper 16 bits of the flags word is used to communicate * information to the scanning code that is NOT recorded in * ss_flags. It might be better to split this stuff out into * a separate variable to avoid confusion. */ #define IEEE80211_SCAN_FLUSH 0x00010000 /* flush candidate table */ #define IEEE80211_SCAN_NOSSID 0x80000000 /* don't update ssid list */ struct ieee80211com; void ieee80211_scan_attach(struct ieee80211com *); void ieee80211_scan_detach(struct ieee80211com *); void ieee80211_scan_vattach(struct ieee80211vap *); void ieee80211_scan_vdetach(struct ieee80211vap *); void ieee80211_scan_dump_channels(const struct ieee80211_scan_state *); #define IEEE80211_SCAN_FOREVER 0x7fffffff int ieee80211_start_scan(struct ieee80211vap *, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]); int ieee80211_check_scan(struct ieee80211vap *, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]); int ieee80211_check_scan_current(struct ieee80211vap *); int ieee80211_bg_scan(struct ieee80211vap *, int); void ieee80211_cancel_scan(struct ieee80211vap *); void ieee80211_cancel_anyscan(struct ieee80211vap *); void ieee80211_scan_next(struct ieee80211vap *); void ieee80211_scan_done(struct ieee80211vap *); void ieee80211_probe_curchan(struct ieee80211vap *, int); struct ieee80211_channel *ieee80211_scan_pickchannel(struct ieee80211com *, int); struct ieee80211_scanparams; void ieee80211_add_scan(struct ieee80211vap *, struct ieee80211_channel *, const struct ieee80211_scanparams *, const struct ieee80211_frame *, int subtype, int rssi, int noise); void ieee80211_scan_timeout(struct ieee80211com *); void ieee80211_scan_assoc_success(struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN]); enum { IEEE80211_SCAN_FAIL_TIMEOUT = 1, /* no response to mgmt frame */ IEEE80211_SCAN_FAIL_STATUS = 2 /* negative response to " " */ }; void ieee80211_scan_assoc_fail(struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], int reason); void ieee80211_scan_flush(struct ieee80211vap *); struct ieee80211_scan_entry; typedef void ieee80211_scan_iter_func(void *, const struct ieee80211_scan_entry *); void ieee80211_scan_iterate(struct ieee80211vap *, ieee80211_scan_iter_func, void *); enum { IEEE80211_BPARSE_BADIELEN = 0x01, /* ie len past end of frame */ IEEE80211_BPARSE_RATES_INVALID = 0x02, /* invalid RATES ie */ IEEE80211_BPARSE_XRATES_INVALID = 0x04, /* invalid XRATES ie */ IEEE80211_BPARSE_SSID_INVALID = 0x08, /* invalid SSID ie */ IEEE80211_BPARSE_CHAN_INVALID = 0x10, /* invalid FH/DSPARMS chan */ IEEE80211_BPARSE_OFFCHAN = 0x20, /* DSPARMS chan != curchan */ IEEE80211_BPARSE_BINTVAL_INVALID= 0x40, /* invalid beacon interval */ IEEE80211_BPARSE_CSA_INVALID = 0x80, /* invalid CSA ie */ }; /* * Parameters supplied when adding/updating an entry in a * scan cache. Pointer variables should be set to NULL * if no data is available. Pointer references can be to * local data; any information that is saved will be copied. * All multi-byte values must be in host byte order. */ struct ieee80211_scanparams { uint8_t status; /* bitmask of IEEE80211_BPARSE_* */ uint8_t chan; /* channel # from FH/DSPARMS */ uint8_t bchan; /* curchan's channel # */ uint8_t fhindex; uint16_t fhdwell; /* FHSS dwell interval */ uint16_t capinfo; /* 802.11 capabilities */ uint16_t erp; /* NB: 0x100 indicates ie present */ uint16_t bintval; uint8_t timoff; uint8_t *ies; /* all captured ies */ size_t ies_len; /* length of all captured ies */ uint8_t *tim; uint8_t *tstamp; uint8_t *country; uint8_t *ssid; uint8_t *rates; uint8_t *xrates; uint8_t *doth; uint8_t *wpa; uint8_t *rsn; uint8_t *wme; uint8_t *htcap; uint8_t *htinfo; uint8_t *ath; uint8_t *tdma; uint8_t *csa; uint8_t *quiet; uint8_t *meshid; uint8_t *meshconf; uint8_t *spare[3]; }; /* * Scan cache entry format used when exporting data from a policy * module; this data may be represented some other way internally. */ struct ieee80211_scan_entry { uint8_t se_macaddr[IEEE80211_ADDR_LEN]; uint8_t se_bssid[IEEE80211_ADDR_LEN]; /* XXX can point inside se_ies */ uint8_t se_ssid[2+IEEE80211_NWID_LEN]; uint8_t se_rates[2+IEEE80211_RATE_MAXSIZE]; uint8_t se_xrates[2+IEEE80211_RATE_MAXSIZE]; union { uint8_t data[8]; u_int64_t tsf; } se_tstamp; /* from last rcv'd beacon */ uint16_t se_intval; /* beacon interval (host byte order) */ uint16_t se_capinfo; /* capabilities (host byte order) */ struct ieee80211_channel *se_chan;/* channel where sta found */ uint16_t se_timoff; /* byte offset to TIM ie */ uint16_t se_fhdwell; /* FH only (host byte order) */ uint8_t se_fhindex; /* FH only */ uint8_t se_dtimperiod; /* DTIM period */ uint16_t se_erp; /* ERP from beacon/probe resp */ int8_t se_rssi; /* avg'd recv ssi */ int8_t se_noise; /* noise floor */ uint8_t se_cc[2]; /* captured country code */ uint8_t se_meshid[2+IEEE80211_MESHID_LEN]; struct ieee80211_ies se_ies; /* captured ie's */ u_int se_age; /* age of entry (0 on create) */ }; MALLOC_DECLARE(M_80211_SCAN); /* * Template for an in-kernel scan policy module. * Modules register with the scanning code and are * typically loaded as needed. */ struct ieee80211_scanner { const char *scan_name; /* printable name */ int (*scan_attach)(struct ieee80211_scan_state *); int (*scan_detach)(struct ieee80211_scan_state *); int (*scan_start)(struct ieee80211_scan_state *, struct ieee80211vap *); int (*scan_restart)(struct ieee80211_scan_state *, struct ieee80211vap *); int (*scan_cancel)(struct ieee80211_scan_state *, struct ieee80211vap *); int (*scan_end)(struct ieee80211_scan_state *, struct ieee80211vap *); int (*scan_flush)(struct ieee80211_scan_state *); struct ieee80211_channel *(*scan_pickchan)( struct ieee80211_scan_state *, int); /* add an entry to the cache */ int (*scan_add)(struct ieee80211_scan_state *, struct ieee80211_channel *, const struct ieee80211_scanparams *, const struct ieee80211_frame *, int subtype, int rssi, int noise); /* age and/or purge entries in the cache */ void (*scan_age)(struct ieee80211_scan_state *); /* note that association failed for an entry */ void (*scan_assoc_fail)(struct ieee80211_scan_state *, const uint8_t macaddr[IEEE80211_ADDR_LEN], int reason); /* note that association succeed for an entry */ void (*scan_assoc_success)(struct ieee80211_scan_state *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); /* iterate over entries in the scan cache */ void (*scan_iterate)(struct ieee80211_scan_state *, ieee80211_scan_iter_func *, void *); void (*scan_spare0)(void); void (*scan_spare1)(void); void (*scan_spare2)(void); void (*scan_spare4)(void); }; void ieee80211_scanner_register(enum ieee80211_opmode, const struct ieee80211_scanner *); void ieee80211_scanner_unregister(enum ieee80211_opmode, const struct ieee80211_scanner *); void ieee80211_scanner_unregister_all(const struct ieee80211_scanner *); const struct ieee80211_scanner *ieee80211_scanner_get(enum ieee80211_opmode); void ieee80211_scan_update_locked(struct ieee80211vap *vap, const struct ieee80211_scanner *scan); void ieee80211_scan_copy_ssid(struct ieee80211vap *vap, struct ieee80211_scan_state *ss, int nssid, const struct ieee80211_scan_ssid ssids[]); void ieee80211_scan_dump_probe_beacon(uint8_t subtype, int isnew, const uint8_t mac[IEEE80211_ADDR_LEN], const struct ieee80211_scanparams *sp, int rssi); void ieee80211_scan_dump(struct ieee80211_scan_state *ss); #endif /* _NET80211_IEEE80211_SCAN_H_ */ Index: head/sys/net80211/ieee80211_scan_sw.c =================================================================== --- head/sys/net80211/ieee80211_scan_sw.c (revision 284142) +++ head/sys/net80211/ieee80211_scan_sw.c (revision 284143) @@ -1,937 +1,958 @@ /*- * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 scanning support. */ #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include struct scan_state { struct ieee80211_scan_state base; /* public state */ u_int ss_iflags; /* flags used internally */ #define ISCAN_MINDWELL 0x0001 /* min dwell time reached */ #define ISCAN_DISCARD 0x0002 /* discard rx'd frames */ #define ISCAN_CANCEL 0x0004 /* cancel current scan */ #define ISCAN_ABORT 0x0008 /* end the scan immediately */ unsigned long ss_chanmindwell; /* min dwell on curchan */ unsigned long ss_scanend; /* time scan must stop */ u_int ss_duration; /* duration for next scan */ struct task ss_scan_task; /* scan execution */ struct cv ss_scan_cv; /* scan signal */ struct callout ss_scan_timer; /* scan timer */ }; #define SCAN_PRIVATE(ss) ((struct scan_state *) ss) /* * Amount of time to go off-channel during a background * scan. This value should be large enough to catch most * ap's but short enough that we can return on-channel * before our listen interval expires. * * XXX tunable * XXX check against configured listen interval */ #define IEEE80211_SCAN_OFFCHANNEL msecs_to_ticks(150) /* * Roaming-related defaults. RSSI thresholds are as returned by the * driver (.5dBm). Transmit rate thresholds are IEEE rate codes (i.e * .5M units) or MCS. */ /* rssi thresholds */ #define ROAM_RSSI_11A_DEFAULT 14 /* 11a bss */ #define ROAM_RSSI_11B_DEFAULT 14 /* 11b bss */ #define ROAM_RSSI_11BONLY_DEFAULT 14 /* 11b-only bss */ /* transmit rate thresholds */ #define ROAM_RATE_11A_DEFAULT 2*12 /* 11a bss */ #define ROAM_RATE_11B_DEFAULT 2*5 /* 11b bss */ #define ROAM_RATE_11BONLY_DEFAULT 2*1 /* 11b-only bss */ #define ROAM_RATE_HALF_DEFAULT 2*6 /* half-width 11a/g bss */ #define ROAM_RATE_QUARTER_DEFAULT 2*3 /* quarter-width 11a/g bss */ #define ROAM_MCS_11N_DEFAULT (1 | IEEE80211_RATE_MCS) /* 11n bss */ static void scan_curchan(struct ieee80211_scan_state *, unsigned long); static void scan_mindwell(struct ieee80211_scan_state *); static void scan_signal(void *); static void scan_task(void *, int); MALLOC_DEFINE(M_80211_SCAN, "80211scan", "802.11 scan state"); -void -ieee80211_swscan_attach(struct ieee80211com *ic) -{ - struct scan_state *ss; - - ss = (struct scan_state *) IEEE80211_MALLOC(sizeof(struct scan_state), - M_80211_SCAN, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); - if (ss == NULL) { - ic->ic_scan = NULL; - return; - } - callout_init_mtx(&ss->ss_scan_timer, IEEE80211_LOCK_OBJ(ic), 0); - cv_init(&ss->ss_scan_cv, "scan"); - TASK_INIT(&ss->ss_scan_task, 0, scan_task, ss); - - ic->ic_scan = &ss->base; - ss->base.ss_ic = ic; - - ic->ic_scan_curchan = scan_curchan; - ic->ic_scan_mindwell = scan_mindwell; - - /* - * TODO: all of the non-vap scan calls should be methods! - */ -} - -void +static void ieee80211_swscan_detach(struct ieee80211com *ic) { struct ieee80211_scan_state *ss = ic->ic_scan; if (ss != NULL) { IEEE80211_LOCK(ic); SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_ABORT; scan_signal(ss); IEEE80211_UNLOCK(ic); ieee80211_draintask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); callout_drain(&SCAN_PRIVATE(ss)->ss_scan_timer); KASSERT((ic->ic_flags & IEEE80211_F_SCAN) == 0, ("scan still running")); /* * For now, do the ss_ops detach here rather * than ieee80211_scan_detach(). * * I'll figure out how to cleanly split things up * at a later date. */ if (ss->ss_ops != NULL) { ss->ss_ops->scan_detach(ss); ss->ss_ops = NULL; } ic->ic_scan = NULL; IEEE80211_FREE(SCAN_PRIVATE(ss), M_80211_SCAN); } } -void +static void ieee80211_swscan_vattach(struct ieee80211vap *vap) { /* nothing to do for now */ /* * TODO: all of the vap scan calls should be methods! */ } -void +static void ieee80211_swscan_vdetach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_LOCK_ASSERT(ic); ss = ic->ic_scan; if (ss != NULL && ss->ss_vap == vap) { if (ic->ic_flags & IEEE80211_F_SCAN) { SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_ABORT; scan_signal(ss); } } } -void +static void ieee80211_swscan_set_scan_duration(struct ieee80211vap *vap, u_int duration) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); /* NB: flush frames rx'd before 1st channel change */ SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_DISCARD; SCAN_PRIVATE(ss)->ss_duration = duration; } /* * Start a scan unless one is already going. */ static int ieee80211_swscan_start_scan_locked(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); if (ic->ic_flags & IEEE80211_F_CSAPENDING) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: scan inhibited by pending channel change\n", __func__); } else if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan, duration %u mindwell %u maxdwell %u, desired mode %s, %s%s%s%s%s%s\n" , __func__ , flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive" , duration, mindwell, maxdwell , ieee80211_phymode_name[vap->iv_des_mode] , flags & IEEE80211_SCAN_FLUSH ? "flush" : "append" , flags & IEEE80211_SCAN_NOPICK ? ", nopick" : "" , flags & IEEE80211_SCAN_NOJOIN ? ", nojoin" : "" , flags & IEEE80211_SCAN_NOBCAST ? ", nobcast" : "" , flags & IEEE80211_SCAN_PICK1ST ? ", pick1st" : "" , flags & IEEE80211_SCAN_ONCE ? ", once" : "" ); ieee80211_scan_update_locked(vap, scan); if (ss->ss_ops != NULL) { if ((flags & IEEE80211_SCAN_NOSSID) == 0) ieee80211_scan_copy_ssid(vap, ss, nssid, ssids); /* NB: top 4 bits for internal use */ ss->ss_flags = flags & 0xfff; if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) vap->iv_stats.is_scan_active++; else vap->iv_stats.is_scan_passive++; if (flags & IEEE80211_SCAN_FLUSH) ss->ss_ops->scan_flush(ss); if (flags & IEEE80211_SCAN_BGSCAN) ic->ic_flags_ext |= IEEE80211_FEXT_BGSCAN; /* Set duration for this particular scan */ ieee80211_swscan_set_scan_duration(vap, duration); ss->ss_next = 0; ss->ss_mindwell = mindwell; ss->ss_maxdwell = maxdwell; /* NB: scan_start must be before the scan runtask */ ss->ss_ops->scan_start(ss, vap); #ifdef IEEE80211_DEBUG if (ieee80211_msg_scan(vap)) ieee80211_scan_dump(ss); #endif /* IEEE80211_DEBUG */ ic->ic_flags |= IEEE80211_F_SCAN; /* Start scan task */ ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); } return 1; } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan already in progress\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); } return 0; } /* * Start a scan unless one is already going. * * Called without the comlock held; grab the comlock as appropriate. */ -int +static int ieee80211_swscan_start_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; int result; IEEE80211_UNLOCK_ASSERT(ic); IEEE80211_LOCK(ic); result = ieee80211_swscan_start_scan_locked(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); IEEE80211_UNLOCK(ic); return result; } /* * Check the scan cache for an ap/channel to use; if that * fails then kick off a new scan. * * Called with the comlock held. * * XXX TODO: split out! */ -int +static int ieee80211_swscan_check_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; int result; IEEE80211_LOCK_ASSERT(ic); if (ss->ss_ops != NULL) { /* XXX verify ss_ops matches vap->iv_opmode */ if ((flags & IEEE80211_SCAN_NOSSID) == 0) { /* * Update the ssid list and mark flags so if * we call start_scan it doesn't duplicate work. */ ieee80211_scan_copy_ssid(vap, ss, nssid, ssids); flags |= IEEE80211_SCAN_NOSSID; } if ((ic->ic_flags & IEEE80211_F_SCAN) == 0 && (flags & IEEE80211_SCAN_FLUSH) == 0 && time_before(ticks, ic->ic_lastscan + vap->iv_scanvalid)) { /* * We're not currently scanning and the cache is * deemed hot enough to consult. Lock out others * by marking IEEE80211_F_SCAN while we decide if * something is already in the scan cache we can * use. Also discard any frames that might come * in while temporarily marked as scanning. */ SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_DISCARD; ic->ic_flags |= IEEE80211_F_SCAN; /* NB: need to use supplied flags in check */ ss->ss_flags = flags & 0xff; result = ss->ss_ops->scan_end(ss, vap); ic->ic_flags &= ~IEEE80211_F_SCAN; SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_DISCARD; if (result) { ieee80211_notify_scan_done(vap); return 1; } } } result = ieee80211_swscan_start_scan_locked(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); return result; } /* * Restart a previous scan. If the previous scan completed * then we start again using the existing channel list. */ -int +static int ieee80211_swscan_bg_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; /* XXX assert unlocked? */ // IEEE80211_UNLOCK_ASSERT(ic); IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { u_int duration; /* * Go off-channel for a fixed interval that is large * enough to catch most ap's but short enough that * we can return on-channel before our listen interval * expires. */ duration = IEEE80211_SCAN_OFFCHANNEL; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan, ticks %u duration %lu\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive", ticks, duration); ieee80211_scan_update_locked(vap, scan); if (ss->ss_ops != NULL) { ss->ss_vap = vap; /* * A background scan does not select a new sta; it * just refreshes the scan cache. Also, indicate * the scan logic should follow the beacon schedule: * we go off-channel and scan for a while, then * return to the bss channel to receive a beacon, * then go off-channel again. All during this time * we notify the ap we're in power save mode. When * the scan is complete we leave power save mode. * If any beacon indicates there are frames pending * for us then we drop out of power save mode * (and background scan) automatically by way of the * usual sta power save logic. */ ss->ss_flags |= IEEE80211_SCAN_NOPICK | IEEE80211_SCAN_BGSCAN | flags ; /* if previous scan completed, restart */ if (ss->ss_next >= ss->ss_last) { if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) vap->iv_stats.is_scan_active++; else vap->iv_stats.is_scan_passive++; /* * NB: beware of the scan cache being flushed; * if the channel list is empty use the * scan_start method to populate it. */ ss->ss_next = 0; if (ss->ss_last != 0) ss->ss_ops->scan_restart(ss, vap); else { ss->ss_ops->scan_start(ss, vap); #ifdef IEEE80211_DEBUG if (ieee80211_msg_scan(vap)) ieee80211_scan_dump(ss); #endif /* IEEE80211_DEBUG */ } } ieee80211_swscan_set_scan_duration(vap, duration); ss->ss_maxdwell = duration; ic->ic_flags |= IEEE80211_F_SCAN; ic->ic_flags_ext |= IEEE80211_FEXT_BGSCAN; ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); } else { /* XXX msg+stat */ } } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan already in progress\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); } IEEE80211_UNLOCK(ic); /* NB: racey, does it matter? */ return (ic->ic_flags & IEEE80211_F_SCAN); } /* * Cancel any scan currently going on for the specified vap. */ -void +static void ieee80211_swscan_cancel_scan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) && ss->ss_vap == vap && (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: cancel %s scan\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); /* clear bg scan NOPICK and mark cancel request */ ss->ss_flags &= ~IEEE80211_SCAN_NOPICK; SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_CANCEL; /* wake up the scan task */ scan_signal(ss); } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called; F_SCAN=%d, vap=%s, CANCEL=%d\n", __func__, !! (ic->ic_flags & IEEE80211_F_SCAN), (ss->ss_vap == vap ? "match" : "nomatch"), !! (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL)); } IEEE80211_UNLOCK(ic); } /* * Cancel any scan currently going on. */ -void +static void ieee80211_swscan_cancel_anyscan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) && (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: cancel %s scan\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); /* clear bg scan NOPICK and mark cancel request */ ss->ss_flags &= ~IEEE80211_SCAN_NOPICK; SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_CANCEL; /* wake up the scan task */ scan_signal(ss); } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called; F_SCAN=%d, vap=%s, CANCEL=%d\n", __func__, !! (ic->ic_flags & IEEE80211_F_SCAN), (ss->ss_vap == vap ? "match" : "nomatch"), !! (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL)); } IEEE80211_UNLOCK(ic); } /* * Public access to scan_next for drivers that manage * scanning themselves (e.g. for firmware-based devices). */ -void +static void ieee80211_swscan_scan_next(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__); /* wake up the scan task */ IEEE80211_LOCK(ic); scan_signal(ss); IEEE80211_UNLOCK(ic); } /* * Public access to scan_next for drivers that are not able to scan single * channels (e.g. for firmware-based devices). */ -void +static void ieee80211_swscan_scan_done(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_LOCK_ASSERT(ic); ss = ic->ic_scan; scan_signal(ss); } /* * Probe the curent channel, if allowed, while scanning. * If the channel is not marked passive-only then send * a probe request immediately. Otherwise mark state and * listen for beacons on the channel; if we receive something * then we'll transmit a probe request. */ -void +static void ieee80211_swscan_probe_curchan(struct ieee80211vap *vap, int force) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; struct ifnet *ifp = vap->iv_ifp; int i; /* * Send directed probe requests followed by any * broadcast probe request. * XXX remove dependence on ic/vap->iv_bss */ for (i = 0; i < ss->ss_nssid; i++) ieee80211_send_probereq(vap->iv_bss, vap->iv_myaddr, ifp->if_broadcastaddr, ifp->if_broadcastaddr, ss->ss_ssid[i].ssid, ss->ss_ssid[i].len); if ((ss->ss_flags & IEEE80211_SCAN_NOBCAST) == 0) ieee80211_send_probereq(vap->iv_bss, vap->iv_myaddr, ifp->if_broadcastaddr, ifp->if_broadcastaddr, "", 0); } /* * Scan curchan. If this is an active scan and the channel * is not marked passive then send probe request frame(s). * Arrange for the channel change after maxdwell ticks. */ static void scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell) { struct ieee80211vap *vap = ss->ss_vap; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: calling; maxdwell=%lu\n", __func__, maxdwell); IEEE80211_LOCK(vap->iv_ic); if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) ieee80211_probe_curchan(vap, 0); callout_reset(&SCAN_PRIVATE(ss)->ss_scan_timer, maxdwell, scan_signal, ss); IEEE80211_UNLOCK(vap->iv_ic); } static void scan_signal(void *arg) { struct ieee80211_scan_state *ss = (struct ieee80211_scan_state *) arg; IEEE80211_LOCK_ASSERT(ss->ss_ic); cv_signal(&SCAN_PRIVATE(ss)->ss_scan_cv); } /* * Handle mindwell requirements completed; initiate a channel * change to the next channel asap. */ static void scan_mindwell(struct ieee80211_scan_state *ss) { struct ieee80211com *ic = ss->ss_ic; IEEE80211_DPRINTF(ss->ss_vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__); IEEE80211_LOCK(ic); scan_signal(ss); IEEE80211_UNLOCK(ic); } static void scan_task(void *arg, int pending) { #define ISCAN_REP (ISCAN_MINDWELL | ISCAN_DISCARD) struct ieee80211_scan_state *ss = (struct ieee80211_scan_state *) arg; struct ieee80211vap *vap = ss->ss_vap; struct ieee80211com *ic = ss->ss_ic; struct ieee80211_channel *chan; unsigned long maxdwell, scanend; int scandone = 0; IEEE80211_LOCK(ic); if (vap == NULL || (ic->ic_flags & IEEE80211_F_SCAN) == 0 || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT)) { /* Cancelled before we started */ goto done; } if (ss->ss_next == ss->ss_last) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no channels to scan\n", __func__); scandone = 1; goto done; } if (vap->iv_opmode == IEEE80211_M_STA && vap->iv_state == IEEE80211_S_RUN) { if ((vap->iv_bss->ni_flags & IEEE80211_NODE_PWR_MGT) == 0) { /* Enable station power save mode */ vap->iv_sta_ps(vap, 1); /* * Use an 1ms delay so the null data frame has a chance * to go out. * XXX Should use M_TXCB mechanism to eliminate this. */ cv_timedwait(&SCAN_PRIVATE(ss)->ss_scan_cv, IEEE80211_LOCK_OBJ(ic), hz / 1000); if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) goto done; } } scanend = ticks + SCAN_PRIVATE(ss)->ss_duration; /* XXX scan state can change! Re-validate scan state! */ IEEE80211_UNLOCK(ic); ic->ic_scan_start(ic); /* notify driver */ IEEE80211_LOCK(ic); for (;;) { scandone = (ss->ss_next >= ss->ss_last) || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: loop start; scandone=%d\n", __func__, scandone); if (scandone || (ss->ss_flags & IEEE80211_SCAN_GOTPICK) || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) || time_after(ticks + ss->ss_mindwell, scanend)) break; chan = ss->ss_chans[ss->ss_next++]; /* * Watch for truncation due to the scan end time. */ if (time_after(ticks + ss->ss_maxdwell, scanend)) maxdwell = scanend - ticks; else maxdwell = ss->ss_maxdwell; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: chan %3d%c -> %3d%c [%s, dwell min %lums max %lums]\n", __func__, ieee80211_chan2ieee(ic, ic->ic_curchan), ieee80211_channel_type_char(ic->ic_curchan), ieee80211_chan2ieee(ic, chan), ieee80211_channel_type_char(chan), (ss->ss_flags & IEEE80211_SCAN_ACTIVE) && (chan->ic_flags & IEEE80211_CHAN_PASSIVE) == 0 ? "active" : "passive", ticks_to_msecs(ss->ss_mindwell), ticks_to_msecs(maxdwell)); /* * Potentially change channel and phy mode. */ ic->ic_curchan = chan; ic->ic_rt = ieee80211_get_ratetable(chan); IEEE80211_UNLOCK(ic); /* * Perform the channel change and scan unlocked so the driver * may sleep. Once set_channel returns the hardware has * completed the channel change. */ ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); /* * Scan curchan. Drivers for "intelligent hardware" * override ic_scan_curchan to tell the device to do * the work. Otherwise we manage the work outselves; * sending a probe request (as needed), and arming the * timeout to switch channels after maxdwell ticks. * * scan_curchan should only pause for the time required to * prepare/initiate the hardware for the scan (if at all), the * below condvar is used to sleep for the channels dwell time * and allows it to be signalled for abort. */ ic->ic_scan_curchan(ss, maxdwell); IEEE80211_LOCK(ic); /* XXX scan state can change! Re-validate scan state! */ SCAN_PRIVATE(ss)->ss_chanmindwell = ticks + ss->ss_mindwell; /* clear mindwell lock and initial channel change flush */ SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_REP; if ((SCAN_PRIVATE(ss)->ss_iflags & (ISCAN_CANCEL|ISCAN_ABORT))) continue; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: waiting\n", __func__); /* Wait to be signalled to scan the next channel */ cv_wait(&SCAN_PRIVATE(ss)->ss_scan_cv, IEEE80211_LOCK_OBJ(ic)); } IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: out\n", __func__); if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) goto done; IEEE80211_UNLOCK(ic); ic->ic_scan_end(ic); /* notify driver */ IEEE80211_LOCK(ic); /* XXX scan state can change! Re-validate scan state! */ /* * Since a cancellation may have occured during one of the * driver calls (whilst unlocked), update scandone. */ if (scandone == 0 && ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0)) { /* XXX printf? */ if_printf(vap->iv_ifp, "%s: OOPS! scan cancelled during driver call (1)!\n", __func__); scandone = 1; } /* * Record scan complete time. Note that we also do * this when canceled so any background scan will * not be restarted for a while. */ if (scandone) ic->ic_lastscan = ticks; /* return to the bss channel */ if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && ic->ic_curchan != ic->ic_bsschan) { ieee80211_setupcurchan(ic, ic->ic_bsschan); IEEE80211_UNLOCK(ic); ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); IEEE80211_LOCK(ic); } /* clear internal flags and any indication of a pick */ SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_REP; ss->ss_flags &= ~IEEE80211_SCAN_GOTPICK; /* * If not canceled and scan completed, do post-processing. * If the callback function returns 0, then it wants to * continue/restart scanning. Unfortunately we needed to * notify the driver to end the scan above to avoid having * rx frames alter the scan candidate list. */ if ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0 && !ss->ss_ops->scan_end(ss, vap) && (ss->ss_flags & IEEE80211_SCAN_ONCE) == 0 && time_before(ticks + ss->ss_mindwell, scanend)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: done, restart " "[ticks %u, dwell min %lu scanend %lu]\n", __func__, ticks, ss->ss_mindwell, scanend); ss->ss_next = 0; /* reset to begining */ if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) vap->iv_stats.is_scan_active++; else vap->iv_stats.is_scan_passive++; ss->ss_ops->scan_restart(ss, vap); /* XXX? */ ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); IEEE80211_UNLOCK(ic); return; } /* past here, scandone is ``true'' if not in bg mode */ if ((ss->ss_flags & IEEE80211_SCAN_BGSCAN) == 0) scandone = 1; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s, [ticks %u, dwell min %lu scanend %lu]\n", __func__, scandone ? "done" : "stopped", ticks, ss->ss_mindwell, scanend); /* * Since a cancellation may have occured during one of the * driver calls (whilst unlocked), update scandone. */ if (scandone == 0 && ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0)) { /* XXX printf? */ if_printf(vap->iv_ifp, "%s: OOPS! scan cancelled during driver call (2)!\n", __func__); scandone = 1; } /* * Clear the SCAN bit first in case frames are * pending on the station power save queue. If * we defer this then the dispatch of the frames * may generate a request to cancel scanning. */ done: ic->ic_flags &= ~IEEE80211_F_SCAN; /* * Drop out of power save mode when a scan has * completed. If this scan was prematurely terminated * because it is a background scan then don't notify * the ap; we'll either return to scanning after we * receive the beacon frame or we'll drop out of power * save mode because the beacon indicates we have frames * waiting for us. */ if (scandone) { vap->iv_sta_ps(vap, 0); if (ss->ss_next >= ss->ss_last) { ieee80211_notify_scan_done(vap); ic->ic_flags_ext &= ~IEEE80211_FEXT_BGSCAN; } } SCAN_PRIVATE(ss)->ss_iflags &= ~(ISCAN_CANCEL|ISCAN_ABORT); ss->ss_flags &= ~(IEEE80211_SCAN_ONCE | IEEE80211_SCAN_PICK1ST); IEEE80211_UNLOCK(ic); #undef ISCAN_REP } /* * Process a beacon or probe response frame. */ -void +static void ieee80211_swscan_add_scan(struct ieee80211vap *vap, struct ieee80211_channel *curchan, const struct ieee80211_scanparams *sp, const struct ieee80211_frame *wh, int subtype, int rssi, int noise) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; /* XXX locking */ /* * Frames received during startup are discarded to avoid * using scan state setup on the initial entry to the timer * callback. This can occur because the device may enable * rx prior to our doing the initial channel change in the * timer routine. */ if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_DISCARD) return; #ifdef IEEE80211_DEBUG if (ieee80211_msg_scan(vap) && (ic->ic_flags & IEEE80211_F_SCAN)) ieee80211_scan_dump_probe_beacon(subtype, 1, wh->i_addr2, sp, rssi); #endif if (ss->ss_ops != NULL && ss->ss_ops->scan_add(ss, curchan, sp, wh, subtype, rssi, noise)) { /* * If we've reached the min dwell time terminate * the timer so we'll switch to the next channel. */ if ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_MINDWELL) == 0 && time_after_eq(ticks, SCAN_PRIVATE(ss)->ss_chanmindwell)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: chan %3d%c min dwell met (%u > %lu)\n", __func__, ieee80211_chan2ieee(ic, ic->ic_curchan), ieee80211_channel_type_char(ic->ic_curchan), ticks, SCAN_PRIVATE(ss)->ss_chanmindwell); SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_MINDWELL; /* * NB: trigger at next clock tick or wait for the * hardware. */ ic->ic_scan_mindwell(ss); } } } +static struct ieee80211_scan_methods swscan_methods = { + .sc_attach = ieee80211_swscan_attach, + .sc_detach = ieee80211_swscan_detach, + .sc_vattach = ieee80211_swscan_vattach, + .sc_vdetach = ieee80211_swscan_vdetach, + .sc_set_scan_duration = ieee80211_swscan_set_scan_duration, + .sc_start_scan = ieee80211_swscan_start_scan, + .sc_check_scan = ieee80211_swscan_check_scan, + .sc_bg_scan = ieee80211_swscan_bg_scan, + .sc_cancel_scan = ieee80211_swscan_cancel_scan, + .sc_cancel_anyscan = ieee80211_swscan_cancel_anyscan, + .sc_scan_next = ieee80211_swscan_scan_next, + .sc_scan_done = ieee80211_swscan_scan_done, + .sc_scan_probe_curchan = ieee80211_swscan_probe_curchan, + .sc_add_scan = ieee80211_swscan_add_scan +}; + +/* + * Default scan attach method. + */ +void +ieee80211_swscan_attach(struct ieee80211com *ic) +{ + struct scan_state *ss; + + /* + * Setup the default methods + */ + ic->ic_scan_methods = &swscan_methods; + + /* Allocate initial scan state */ + ss = (struct scan_state *) IEEE80211_MALLOC(sizeof(struct scan_state), + M_80211_SCAN, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); + if (ss == NULL) { + ic->ic_scan = NULL; + return; + } + callout_init_mtx(&ss->ss_scan_timer, IEEE80211_LOCK_OBJ(ic), 0); + cv_init(&ss->ss_scan_cv, "scan"); + TASK_INIT(&ss->ss_scan_task, 0, scan_task, ss); + + ic->ic_scan = &ss->base; + ss->base.ss_ic = ic; + + ic->ic_scan_curchan = scan_curchan; + ic->ic_scan_mindwell = scan_mindwell; +} Index: head/sys/net80211/ieee80211_scan_sw.h =================================================================== --- head/sys/net80211/ieee80211_scan_sw.h (revision 284142) +++ head/sys/net80211/ieee80211_scan_sw.h (revision 284143) @@ -1,61 +1,32 @@ /*- * Copyright (c) 2015 Adrian Chadd * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef __NET80211_IEEE80211_SCAN_SW_H__ #define __NET80211_IEEE80211_SCAN_SW_H__ extern void ieee80211_swscan_attach(struct ieee80211com *ic); -extern void ieee80211_swscan_detach(struct ieee80211com *ic); - -extern void ieee80211_swscan_vattach(struct ieee80211vap *vap); -extern void ieee80211_swscan_vdetach(struct ieee80211vap *vap); - -extern int ieee80211_swscan_start_scan(const struct ieee80211_scanner *scan, - struct ieee80211vap *vap, int flags, - u_int duration, u_int mindwell, u_int maxdwell, - u_int nssid, const struct ieee80211_scan_ssid ssids[]); -extern void ieee80211_swscan_set_scan_duration(struct ieee80211vap *vap, - u_int duration); -extern void ieee80211_swscan_run_scan_task(struct ieee80211vap *vap); -extern int ieee80211_swscan_check_scan(const struct ieee80211_scanner *scan, - struct ieee80211vap *vap, int flags, - u_int duration, u_int mindwell, u_int maxdwell, - u_int nssid, const struct ieee80211_scan_ssid ssids[]); -extern int ieee80211_swscan_bg_scan(const struct ieee80211_scanner *scan, - struct ieee80211vap *vap, int flags); -extern void ieee80211_swscan_cancel_scan(struct ieee80211vap *vap); -extern void ieee80211_swscan_cancel_anyscan(struct ieee80211vap *vap); -extern void ieee80211_swscan_scan_next(struct ieee80211vap *vap); -extern void ieee80211_swscan_scan_done(struct ieee80211vap *vap); -extern void ieee80211_swscan_probe_curchan(struct ieee80211vap *vap, - int force); -extern void ieee80211_swscan_add_scan(struct ieee80211vap *vap, - struct ieee80211_channel *curchan, - const struct ieee80211_scanparams *sp, - const struct ieee80211_frame *wh, - int subtype, int rssi, int noise); #endif /* __NET80211_IEEE80211_SCAN_SW_H__ */ Index: head/sys/net80211/ieee80211_var.h =================================================================== --- head/sys/net80211/ieee80211_var.h (revision 284142) +++ head/sys/net80211/ieee80211_var.h (revision 284143) @@ -1,989 +1,990 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_VAR_H_ #define _NET80211_IEEE80211_VAR_H_ /* * Definitions for IEEE 802.11 drivers. */ /* NB: portability glue must go first */ #if defined(__NetBSD__) #include #elif defined(__FreeBSD__) #include #elif defined(__linux__) #include #else #error "No support for your operating system!" #endif #include #include #include #include #include #include /* for ieee80211_stats */ #include #include #include #include #include #include #define IEEE80211_TXPOWER_MAX 100 /* .5 dBm (XXX units?) */ #define IEEE80211_TXPOWER_MIN 0 /* kill radio */ #define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */ #define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */ #define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */ #define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */ #define IEEE80211_BGSCAN_INTVAL_MIN 15 /* min bg scan intvl (secs) */ #define IEEE80211_BGSCAN_INTVAL_DEFAULT (5*60) /* default bg scan intvl */ #define IEEE80211_BGSCAN_IDLE_MIN 100 /* min idle time (ms) */ #define IEEE80211_BGSCAN_IDLE_DEFAULT 250 /* default idle time (ms) */ #define IEEE80211_SCAN_VALID_MIN 10 /* min scan valid time (secs) */ #define IEEE80211_SCAN_VALID_DEFAULT 60 /* default scan valid time */ #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ #define IEEE80211_FIXED_RATE_NONE 0xff #define IEEE80211_TXMAX_DEFAULT 6 /* default ucast max retries */ #define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX #define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024) #define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000) #define IEEE80211_TU_TO_TICKS(x)(((x) * 1024 * hz) / (1000 * 1000)) /* * 802.11 control state is split into a common portion that maps * 1-1 to a physical device and one or more "Virtual AP's" (VAP) * that are bound to an ieee80211com instance and share a single * underlying device. Each VAP has a corresponding OS device * entity through which traffic flows and that applications use * for issuing ioctls, etc. */ /* * Data common to one or more virtual AP's. State shared by * the underlying device and the net80211 layer is exposed here; * e.g. device-specific callbacks. */ struct ieee80211vap; typedef void (*ieee80211vap_attach)(struct ieee80211vap *); struct ieee80211_appie { uint16_t ie_len; /* size of ie_data */ uint8_t ie_data[]; /* user-specified IE's */ }; struct ieee80211_tdma_param; struct ieee80211_rate_table; struct ieee80211_tx_ampdu; struct ieee80211_rx_ampdu; struct ieee80211_superg; struct ieee80211_frame; struct ieee80211com { struct ifnet *ic_ifp; /* associated device */ void *ic_softc; /* driver softc */ const char *ic_name; /* usually device name */ ieee80211_com_lock_t ic_comlock; /* state update lock */ ieee80211_tx_lock_t ic_txlock; /* ic/vap TX lock */ TAILQ_HEAD(, ieee80211vap) ic_vaps; /* list of vap instances */ int ic_headroom; /* driver tx headroom needs */ enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */ enum ieee80211_opmode ic_opmode; /* operation mode */ struct ifmedia ic_media; /* interface media config */ struct callout ic_inact; /* inactivity processing */ struct taskqueue *ic_tq; /* deferred state thread */ struct task ic_parent_task; /* deferred parent processing */ struct task ic_promisc_task;/* deferred promisc update */ struct task ic_mcast_task; /* deferred mcast update */ struct task ic_chan_task; /* deferred channel change */ struct task ic_bmiss_task; /* deferred beacon miss hndlr */ struct task ic_chw_task; /* deferred HT CHW update */ counter_u64_t ic_ierrors; /* input errors */ counter_u64_t ic_oerrors; /* output errors */ uint32_t ic_flags; /* state flags */ uint32_t ic_flags_ext; /* extended state flags */ uint32_t ic_flags_ht; /* HT state flags */ uint32_t ic_flags_ven; /* vendor state flags */ uint32_t ic_caps; /* capabilities */ uint32_t ic_htcaps; /* HT capabilities */ uint32_t ic_htextcaps; /* HT extended capabilities */ uint32_t ic_cryptocaps; /* crypto capabilities */ uint8_t ic_modecaps[2]; /* set of mode capabilities */ uint8_t ic_promisc; /* vap's needing promisc mode */ uint8_t ic_allmulti; /* vap's needing all multicast*/ uint8_t ic_nrunning; /* vap's marked running */ uint8_t ic_curmode; /* current mode */ uint16_t ic_bintval; /* beacon interval */ uint16_t ic_lintval; /* listen interval */ uint16_t ic_holdover; /* PM hold over duration */ uint16_t ic_txpowlimit; /* global tx power limit */ struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX]; /* * Channel state: * * ic_channels is the set of available channels for the device; * it is setup by the driver * ic_nchans is the number of valid entries in ic_channels * ic_chan_avail is a bit vector of these channels used to check * whether a channel is available w/o searching the channel table. * ic_chan_active is a (potentially) constrained subset of * ic_chan_avail that reflects any mode setting or user-specified * limit on the set of channels to use/scan * ic_curchan is the current channel the device is set to; it may * be different from ic_bsschan when we are off-channel scanning * or otherwise doing background work * ic_bsschan is the channel selected for operation; it may * be undefined (IEEE80211_CHAN_ANYC) * ic_prevchan is a cached ``previous channel'' used to optimize * lookups when switching back+forth between two channels * (e.g. for dynamic turbo) */ int ic_nchans; /* # entries in ic_channels */ struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX]; uint8_t ic_chan_avail[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_active[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_scan[IEEE80211_CHAN_BYTES]; struct ieee80211_channel *ic_curchan; /* current channel */ const struct ieee80211_rate_table *ic_rt; /* table for ic_curchan */ struct ieee80211_channel *ic_bsschan; /* bss channel */ struct ieee80211_channel *ic_prevchan; /* previous channel */ struct ieee80211_regdomain ic_regdomain;/* regulatory data */ struct ieee80211_appie *ic_countryie; /* calculated country ie */ struct ieee80211_channel *ic_countryie_chan; /* 802.11h/DFS state */ struct ieee80211_channel *ic_csa_newchan;/* channel for doing CSA */ short ic_csa_mode; /* mode for doing CSA */ short ic_csa_count; /* count for doing CSA */ struct ieee80211_dfs_state ic_dfs; /* DFS state */ struct ieee80211_scan_state *ic_scan; /* scan state */ + struct ieee80211_scan_methods *ic_scan_methods; /* scan methods */ int ic_lastdata; /* time of last data frame */ int ic_lastscan; /* time last scan completed */ /* NB: this is the union of all vap stations/neighbors */ int ic_max_keyix; /* max h/w key index */ struct ieee80211_node_table ic_sta; /* stations/neighbors */ struct ieee80211_ageq ic_stageq; /* frame staging queue */ uint32_t ic_hash_key; /* random key for mac hash */ /* XXX multi-bss: split out common/vap parts */ struct ieee80211_wme_state ic_wme; /* WME/WMM state */ /* XXX multi-bss: can per-vap be done/make sense? */ enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */ uint16_t ic_nonerpsta; /* # non-ERP stations */ uint16_t ic_longslotsta; /* # long slot time stations */ uint16_t ic_sta_assoc; /* stations associated */ uint16_t ic_ht_sta_assoc;/* HT stations associated */ uint16_t ic_ht40_sta_assoc;/* HT40 stations associated */ uint8_t ic_curhtprotmode;/* HTINFO bss state */ enum ieee80211_protmode ic_htprotmode; /* HT protection mode */ int ic_lastnonerp; /* last time non-ERP sta noted*/ int ic_lastnonht; /* last time non-HT sta noted */ uint8_t ic_rxstream; /* # RX streams */ uint8_t ic_txstream; /* # TX streams */ /* optional state for Atheros SuperG protocol extensions */ struct ieee80211_superg *ic_superg; /* radiotap handling */ struct ieee80211_radiotap_header *ic_th;/* tx radiotap headers */ void *ic_txchan; /* channel state in ic_th */ struct ieee80211_radiotap_header *ic_rh;/* rx radiotap headers */ void *ic_rxchan; /* channel state in ic_rh */ int ic_montaps; /* active monitor mode taps */ /* virtual ap create/delete */ struct ieee80211vap* (*ic_vap_create)(struct ieee80211com *, const char [IFNAMSIZ], int, enum ieee80211_opmode, int, const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN]); void (*ic_vap_delete)(struct ieee80211vap *); /* operating mode attachment */ ieee80211vap_attach ic_vattach[IEEE80211_OPMODE_MAX]; /* return hardware/radio capabilities */ void (*ic_getradiocaps)(struct ieee80211com *, int, int *, struct ieee80211_channel []); /* check and/or prepare regdomain state change */ int (*ic_setregdomain)(struct ieee80211com *, struct ieee80211_regdomain *, int, struct ieee80211_channel []); int (*ic_set_quiet)(struct ieee80211_node *, u_int8_t *quiet_elm); /* send/recv 802.11 management frame */ int (*ic_send_mgmt)(struct ieee80211_node *, int, int); /* send raw 802.11 frame */ int (*ic_raw_xmit)(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); /* update device state for 802.11 slot time change */ void (*ic_updateslot)(struct ieee80211com *); /* handle multicast state changes */ void (*ic_update_mcast)(struct ieee80211com *); /* handle promiscuous mode changes */ void (*ic_update_promisc)(struct ieee80211com *); /* new station association callback/notification */ void (*ic_newassoc)(struct ieee80211_node *, int); /* TDMA update notification */ void (*ic_tdma_update)(struct ieee80211_node *, const struct ieee80211_tdma_param *, int); /* node state management */ struct ieee80211_node* (*ic_node_alloc)(struct ieee80211vap *, const uint8_t [IEEE80211_ADDR_LEN]); void (*ic_node_free)(struct ieee80211_node *); void (*ic_node_cleanup)(struct ieee80211_node *); void (*ic_node_age)(struct ieee80211_node *); void (*ic_node_drain)(struct ieee80211_node *); int8_t (*ic_node_getrssi)(const struct ieee80211_node*); void (*ic_node_getsignal)(const struct ieee80211_node*, int8_t *, int8_t *); void (*ic_node_getmimoinfo)( const struct ieee80211_node*, struct ieee80211_mimo_info *); /* scanning support */ void (*ic_scan_start)(struct ieee80211com *); void (*ic_scan_end)(struct ieee80211com *); void (*ic_set_channel)(struct ieee80211com *); void (*ic_scan_curchan)(struct ieee80211_scan_state *, unsigned long); void (*ic_scan_mindwell)(struct ieee80211_scan_state *); /* * 802.11n ADDBA support. A simple/generic implementation * of A-MPDU tx aggregation is provided; the driver may * override these methods to provide their own support. * A-MPDU rx re-ordering happens automatically if the * driver passes out-of-order frames to ieee80211_input * from an assocated HT station. */ int (*ic_recv_action)(struct ieee80211_node *, const struct ieee80211_frame *, const uint8_t *frm, const uint8_t *efrm); int (*ic_send_action)(struct ieee80211_node *, int category, int action, void *); /* check if A-MPDU should be enabled this station+ac */ int (*ic_ampdu_enable)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); /* start/stop doing A-MPDU tx aggregation for a station */ int (*ic_addba_request)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int dialogtoken, int baparamset, int batimeout); int (*ic_addba_response)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int status, int baparamset, int batimeout); void (*ic_addba_stop)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); void (*ic_addba_response_timeout)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); /* BAR response received */ void (*ic_bar_response)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int status); /* start/stop doing A-MPDU rx processing for a station */ int (*ic_ampdu_rx_start)(struct ieee80211_node *, struct ieee80211_rx_ampdu *, int baparamset, int batimeout, int baseqctl); void (*ic_ampdu_rx_stop)(struct ieee80211_node *, struct ieee80211_rx_ampdu *); /* The channel width has changed (20<->2040) */ void (*ic_update_chw)(struct ieee80211com *); uint64_t ic_spare[7]; }; struct ieee80211_aclator; struct ieee80211_tdma_state; struct ieee80211_mesh_state; struct ieee80211_hwmp_state; struct ieee80211vap { struct ifmedia iv_media; /* interface media config */ struct ifnet *iv_ifp; /* associated device */ struct bpf_if *iv_rawbpf; /* packet filter structure */ struct sysctl_ctx_list *iv_sysctl; /* dynamic sysctl context */ struct sysctl_oid *iv_oid; /* net.wlan.X sysctl oid */ TAILQ_ENTRY(ieee80211vap) iv_next; /* list of vap instances */ struct ieee80211com *iv_ic; /* back ptr to common state */ uint32_t iv_debug; /* debug msg flags */ struct ieee80211_stats iv_stats; /* statistics */ uint8_t iv_myaddr[IEEE80211_ADDR_LEN]; uint32_t iv_flags; /* state flags */ uint32_t iv_flags_ext; /* extended state flags */ uint32_t iv_flags_ht; /* HT state flags */ uint32_t iv_flags_ven; /* vendor state flags */ uint32_t iv_caps; /* capabilities */ uint32_t iv_htcaps; /* HT capabilities */ uint32_t iv_htextcaps; /* HT extended capabilities */ enum ieee80211_opmode iv_opmode; /* operation mode */ enum ieee80211_state iv_state; /* state machine state */ enum ieee80211_state iv_nstate; /* pending state */ int iv_nstate_arg; /* pending state arg */ struct task iv_nstate_task; /* deferred state processing */ struct task iv_swbmiss_task;/* deferred iv_bmiss call */ struct callout iv_mgtsend; /* mgmt frame response timer */ /* inactivity timer settings */ int iv_inact_init; /* setting for new station */ int iv_inact_auth; /* auth but not assoc setting */ int iv_inact_run; /* authorized setting */ int iv_inact_probe; /* inactive probe time */ int iv_des_nssid; /* # desired ssids */ struct ieee80211_scan_ssid iv_des_ssid[1];/* desired ssid table */ uint8_t iv_des_bssid[IEEE80211_ADDR_LEN]; struct ieee80211_channel *iv_des_chan; /* desired channel */ uint16_t iv_des_mode; /* desired mode */ int iv_nicknamelen; /* XXX junk */ uint8_t iv_nickname[IEEE80211_NWID_LEN]; u_int iv_bgscanidle; /* bg scan idle threshold */ u_int iv_bgscanintvl; /* bg scan min interval */ u_int iv_scanvalid; /* scan cache valid threshold */ u_int iv_scanreq_duration; u_int iv_scanreq_mindwell; u_int iv_scanreq_maxdwell; uint16_t iv_scanreq_flags;/* held scan request params */ uint8_t iv_scanreq_nssid; struct ieee80211_scan_ssid iv_scanreq_ssid[IEEE80211_SCAN_MAX_SSID]; /* sta-mode roaming state */ enum ieee80211_roamingmode iv_roaming; /* roaming mode */ struct ieee80211_roamparam iv_roamparms[IEEE80211_MODE_MAX]; uint8_t iv_bmissthreshold; uint8_t iv_bmiss_count; /* current beacon miss count */ int iv_bmiss_max; /* max bmiss before scan */ uint16_t iv_swbmiss_count;/* beacons in last period */ uint16_t iv_swbmiss_period;/* s/w bmiss period */ struct callout iv_swbmiss; /* s/w beacon miss timer */ int iv_ampdu_rxmax; /* A-MPDU rx limit (bytes) */ int iv_ampdu_density;/* A-MPDU density */ int iv_ampdu_limit; /* A-MPDU tx limit (bytes) */ int iv_amsdu_limit; /* A-MSDU tx limit (bytes) */ u_int iv_ampdu_mintraffic[WME_NUM_AC]; uint32_t *iv_aid_bitmap; /* association id map */ uint16_t iv_max_aid; uint16_t iv_sta_assoc; /* stations associated */ uint16_t iv_ps_sta; /* stations in power save */ uint16_t iv_ps_pending; /* ps sta's w/ pending frames */ uint16_t iv_txseq; /* mcast xmit seq# space */ uint16_t iv_tim_len; /* ic_tim_bitmap size (bytes) */ uint8_t *iv_tim_bitmap; /* power-save stations w/ data*/ uint8_t iv_dtim_period; /* DTIM period */ uint8_t iv_dtim_count; /* DTIM count from last bcn */ /* set/unset aid pwrsav state */ uint8_t iv_quiet; /* Quiet Element */ uint8_t iv_quiet_count; /* constant count for Quiet Element */ uint8_t iv_quiet_count_value; /* variable count for Quiet Element */ uint8_t iv_quiet_period; /* period for Quiet Element */ uint16_t iv_quiet_duration; /* duration for Quiet Element */ uint16_t iv_quiet_offset; /* offset for Quiet Element */ int iv_csa_count; /* count for doing CSA */ struct ieee80211_node *iv_bss; /* information for this node */ struct ieee80211_txparam iv_txparms[IEEE80211_MODE_MAX]; uint16_t iv_rtsthreshold; uint16_t iv_fragthreshold; int iv_inact_timer; /* inactivity timer wait */ /* application-specified IE's to attach to mgt frames */ struct ieee80211_appie *iv_appie_beacon; struct ieee80211_appie *iv_appie_probereq; struct ieee80211_appie *iv_appie_proberesp; struct ieee80211_appie *iv_appie_assocreq; struct ieee80211_appie *iv_appie_assocresp; struct ieee80211_appie *iv_appie_wpa; uint8_t *iv_wpa_ie; uint8_t *iv_rsn_ie; uint16_t iv_max_keyix; /* max h/w key index */ ieee80211_keyix iv_def_txkey; /* default/group tx key index */ struct ieee80211_key iv_nw_keys[IEEE80211_WEP_NKID]; int (*iv_key_alloc)(struct ieee80211vap *, struct ieee80211_key *, ieee80211_keyix *, ieee80211_keyix *); int (*iv_key_delete)(struct ieee80211vap *, const struct ieee80211_key *); int (*iv_key_set)(struct ieee80211vap *, const struct ieee80211_key *, const uint8_t mac[IEEE80211_ADDR_LEN]); void (*iv_key_update_begin)(struct ieee80211vap *); void (*iv_key_update_end)(struct ieee80211vap *); const struct ieee80211_authenticator *iv_auth; /* authenticator glue */ void *iv_ec; /* private auth state */ const struct ieee80211_aclator *iv_acl; /* acl glue */ void *iv_as; /* private aclator state */ const struct ieee80211_ratectl *iv_rate; void *iv_rs; /* private ratectl state */ struct ieee80211_tdma_state *iv_tdma; /* tdma state */ struct ieee80211_mesh_state *iv_mesh; /* MBSS state */ struct ieee80211_hwmp_state *iv_hwmp; /* HWMP state */ /* operate-mode detach hook */ void (*iv_opdetach)(struct ieee80211vap *); /* receive processing */ int (*iv_input)(struct ieee80211_node *, struct mbuf *, const struct ieee80211_rx_stats *, int, int); void (*iv_recv_mgmt)(struct ieee80211_node *, struct mbuf *, int, const struct ieee80211_rx_stats *, int, int); void (*iv_recv_ctl)(struct ieee80211_node *, struct mbuf *, int); void (*iv_deliver_data)(struct ieee80211vap *, struct ieee80211_node *, struct mbuf *); #if 0 /* send processing */ int (*iv_send_mgmt)(struct ieee80211_node *, int, int); #endif /* beacon miss processing */ void (*iv_bmiss)(struct ieee80211vap *); /* reset device state after 802.11 parameter/state change */ int (*iv_reset)(struct ieee80211vap *, u_long); /* [schedule] beacon frame update */ void (*iv_update_beacon)(struct ieee80211vap *, int); /* power save handling */ void (*iv_update_ps)(struct ieee80211vap *, int); int (*iv_set_tim)(struct ieee80211_node *, int); void (*iv_node_ps)(struct ieee80211_node *, int); void (*iv_sta_ps)(struct ieee80211vap *, int); void (*iv_recv_pspoll)(struct ieee80211_node *, struct mbuf *); /* state machine processing */ int (*iv_newstate)(struct ieee80211vap *, enum ieee80211_state, int); /* 802.3 output method for raw frame xmit */ int (*iv_output)(struct ifnet *, struct mbuf *, const struct sockaddr *, struct route *); uint64_t iv_spare[6]; }; MALLOC_DECLARE(M_80211_VAP); #define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0) #define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN) /* ic_flags/iv_flags */ #define IEEE80211_F_TURBOP 0x00000001 /* CONF: ATH Turbo enabled*/ #define IEEE80211_F_COMP 0x00000002 /* CONF: ATH comp enabled */ #define IEEE80211_F_FF 0x00000004 /* CONF: ATH FF enabled */ #define IEEE80211_F_BURST 0x00000008 /* CONF: bursting enabled */ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */ #define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */ #define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */ #define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */ #define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */ #define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */ #define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/ #define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */ #define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */ #define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */ #define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/ #define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */ #define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */ #define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */ #define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */ #define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */ #define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */ #define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/ #define IEEE80211_F_CSAPENDING 0x00400000 /* STATUS: chan switch pending*/ #define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */ #define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */ #define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */ #define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */ #define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */ #define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */ #define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */ #define IEEE80211_F_PCF 0x20000000 /* CONF: PCF enabled */ #define IEEE80211_F_DOTH 0x40000000 /* CONF: 11h enabled */ #define IEEE80211_F_DWDS 0x80000000 /* CONF: Dynamic WDS enabled */ #define IEEE80211_F_BITS \ "\20\1TURBOP\2COMP\3FF\4BURST\5PRIVACY\6PUREG\10SCAN\11ASCAN\12SIBSS" \ "\13SHSLOT\14PMGTON\15DESBSSID\16WME\17BGSCAN\20SWRETRY\21TXPOW_FIXED" \ "\22IBSSON\23SHPREAMBLE\24DATAPAD\25USEPROT\26USERBARKER\27CSAPENDING" \ "\30WPA1\31WPA2\32DROPUNENC\33COUNTERM\34HIDESSID\35NOBRIDG\36PCF" \ "\37DOTH\40DWDS" /* Atheros protocol-specific flags */ #define IEEE80211_F_ATHEROS \ (IEEE80211_F_FF | IEEE80211_F_COMP | IEEE80211_F_TURBOP) /* Check if an Atheros capability was negotiated for use */ #define IEEE80211_ATH_CAP(vap, ni, bit) \ ((vap)->iv_flags & (ni)->ni_ath_flags & (bit)) /* ic_flags_ext/iv_flags_ext */ #define IEEE80211_FEXT_INACT 0x00000002 /* CONF: sta inact handling */ #define IEEE80211_FEXT_SCANWAIT 0x00000004 /* STATUS: awaiting scan */ /* 0x00000006 reserved */ #define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: complete bgscan */ #define IEEE80211_FEXT_WPS 0x00000010 /* CONF: WPS enabled */ #define IEEE80211_FEXT_TSN 0x00000020 /* CONF: TSN enabled */ #define IEEE80211_FEXT_SCANREQ 0x00000040 /* STATUS: scan req params */ #define IEEE80211_FEXT_RESUME 0x00000080 /* STATUS: start on resume */ #define IEEE80211_FEXT_4ADDR 0x00000100 /* CONF: apply 4-addr encap */ #define IEEE80211_FEXT_NONERP_PR 0x00000200 /* STATUS: non-ERP sta present*/ #define IEEE80211_FEXT_SWBMISS 0x00000400 /* CONF: do bmiss in s/w */ #define IEEE80211_FEXT_DFS 0x00000800 /* CONF: DFS enabled */ #define IEEE80211_FEXT_DOTD 0x00001000 /* CONF: 11d enabled */ #define IEEE80211_FEXT_STATEWAIT 0x00002000 /* STATUS: awaiting state chg */ #define IEEE80211_FEXT_REINIT 0x00004000 /* STATUS: INIT state first */ #define IEEE80211_FEXT_BPF 0x00008000 /* STATUS: BPF tap present */ /* NB: immutable: should be set only when creating a vap */ #define IEEE80211_FEXT_WDSLEGACY 0x00010000 /* CONF: legacy WDS operation */ #define IEEE80211_FEXT_PROBECHAN 0x00020000 /* CONF: probe passive channel*/ #define IEEE80211_FEXT_UNIQMAC 0x00040000 /* CONF: user or computed mac */ #define IEEE80211_FEXT_BITS \ "\20\2INACT\3SCANWAIT\4BGSCAN\5WPS\6TSN\7SCANREQ\10RESUME" \ "\0114ADDR\12NONEPR_PR\13SWBMISS\14DFS\15DOTD\16STATEWAIT\17REINIT" \ "\20BPF\21WDSLEGACY\22PROBECHAN\23UNIQMAC" /* ic_flags_ht/iv_flags_ht */ #define IEEE80211_FHT_NONHT_PR 0x00000001 /* STATUS: non-HT sta present */ #define IEEE80211_FHT_GF 0x00040000 /* CONF: Greenfield enabled */ #define IEEE80211_FHT_HT 0x00080000 /* CONF: HT supported */ #define IEEE80211_FHT_AMPDU_TX 0x00100000 /* CONF: A-MPDU tx supported */ #define IEEE80211_FHT_AMPDU_RX 0x00200000 /* CONF: A-MPDU rx supported */ #define IEEE80211_FHT_AMSDU_TX 0x00400000 /* CONF: A-MSDU tx supported */ #define IEEE80211_FHT_AMSDU_RX 0x00800000 /* CONF: A-MSDU rx supported */ #define IEEE80211_FHT_USEHT40 0x01000000 /* CONF: 20/40 use enabled */ #define IEEE80211_FHT_PUREN 0x02000000 /* CONF: 11n w/o legacy sta's */ #define IEEE80211_FHT_SHORTGI20 0x04000000 /* CONF: short GI in HT20 */ #define IEEE80211_FHT_SHORTGI40 0x08000000 /* CONF: short GI in HT40 */ #define IEEE80211_FHT_HTCOMPAT 0x10000000 /* CONF: HT vendor OUI's */ #define IEEE80211_FHT_RIFS 0x20000000 /* CONF: RIFS enabled */ #define IEEE80211_FHT_STBC_TX 0x40000000 /* CONF: STBC tx enabled */ #define IEEE80211_FHT_STBC_RX 0x80000000 /* CONF: STBC rx enabled */ #define IEEE80211_FHT_BITS \ "\20\1NONHT_PR" \ "\23GF\24HT\25AMPDU_TX\26AMPDU_TX" \ "\27AMSDU_TX\30AMSDU_RX\31USEHT40\32PUREN\33SHORTGI20\34SHORTGI40" \ "\35HTCOMPAT\36RIFS\37STBC_TX\40STBC_RX" #define IEEE80211_FVEN_BITS "\20" /* ic_caps/iv_caps: device driver capabilities */ /* 0x2e available */ #define IEEE80211_C_STA 0x00000001 /* CAPABILITY: STA available */ #define IEEE80211_C_8023ENCAP 0x00000002 /* CAPABILITY: 802.3 encap */ #define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */ #define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/ #define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */ #define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */ #define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */ #define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */ #define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */ #define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */ #define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */ #define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */ #define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */ #define IEEE80211_C_DFS 0x00020000 /* CAPABILITY: DFS/radar avail*/ #define IEEE80211_C_MBSS 0x00040000 /* CAPABILITY: MBSS available */ #define IEEE80211_C_SWSLEEP 0x00080000 /* CAPABILITY: do sleep here */ /* 0x7c0000 available */ #define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */ #define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */ #define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/ #define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */ #define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */ #define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */ /* 0x10000000 reserved */ #define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */ #define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */ #define IEEE80211_C_TDMA 0x80000000 /* CAPABILITY: TDMA avail */ /* XXX protection/barker? */ #define IEEE80211_C_OPMODE \ (IEEE80211_C_STA | IEEE80211_C_IBSS | IEEE80211_C_HOSTAP | \ IEEE80211_C_AHDEMO | IEEE80211_C_MONITOR | IEEE80211_C_WDS | \ IEEE80211_C_TDMA | IEEE80211_C_MBSS) #define IEEE80211_C_BITS \ "\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \ "\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \ "\21MONITOR\22DFS\23MBSS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \ "\37TXFRAG\40TDMA" /* * ic_htcaps/iv_htcaps: HT-specific device/driver capabilities * * NB: the low 16-bits are the 802.11 definitions, the upper * 16-bits are used to define s/w/driver capabilities. */ #define IEEE80211_HTC_AMPDU 0x00010000 /* CAPABILITY: A-MPDU tx */ #define IEEE80211_HTC_AMSDU 0x00020000 /* CAPABILITY: A-MSDU tx */ /* NB: HT40 is implied by IEEE80211_HTCAP_CHWIDTH40 */ #define IEEE80211_HTC_HT 0x00040000 /* CAPABILITY: HT operation */ #define IEEE80211_HTC_SMPS 0x00080000 /* CAPABILITY: MIMO power save*/ #define IEEE80211_HTC_RIFS 0x00100000 /* CAPABILITY: RIFS support */ #define IEEE80211_HTC_RXUNEQUAL 0x00200000 /* CAPABILITY: RX unequal MCS */ #define IEEE80211_HTC_RXMCS32 0x00400000 /* CAPABILITY: MCS32 support */ #define IEEE80211_HTC_TXUNEQUAL 0x00800000 /* CAPABILITY: TX unequal MCS */ #define IEEE80211_HTC_TXMCS32 0x01000000 /* CAPABILITY: MCS32 suport */ #define IEEE80211_C_HTCAP_BITS \ "\20\1LDPC\2CHWIDTH40\5GREENFIELD\6SHORTGI20\7SHORTGI40\10TXSTBC" \ "\21AMPDU\22AMSDU\23HT\24SMPS\25RIFS" int ic_printf(struct ieee80211com *, const char *, ...) __printflike(2, 3); void ieee80211_ifattach(struct ieee80211com *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); void ieee80211_ifdetach(struct ieee80211com *); int ieee80211_vap_setup(struct ieee80211com *, struct ieee80211vap *, const char name[IFNAMSIZ], int unit, enum ieee80211_opmode opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t macaddr[IEEE80211_ADDR_LEN]); int ieee80211_vap_attach(struct ieee80211vap *, ifm_change_cb_t, ifm_stat_cb_t); void ieee80211_vap_detach(struct ieee80211vap *); const struct ieee80211_rateset *ieee80211_get_suprates(struct ieee80211com *ic, const struct ieee80211_channel *); void ieee80211_announce(struct ieee80211com *); void ieee80211_announce_channels(struct ieee80211com *); void ieee80211_drain(struct ieee80211com *); void ieee80211_media_init(struct ieee80211com *); struct ieee80211com *ieee80211_find_vap(const uint8_t mac[IEEE80211_ADDR_LEN]); int ieee80211_media_change(struct ifnet *); void ieee80211_media_status(struct ifnet *, struct ifmediareq *); int ieee80211_ioctl(struct ifnet *, u_long, caddr_t); int ieee80211_rate2media(struct ieee80211com *, int, enum ieee80211_phymode); int ieee80211_media2rate(int); int ieee80211_mhz2ieee(u_int, u_int); int ieee80211_chan2ieee(struct ieee80211com *, const struct ieee80211_channel *); u_int ieee80211_ieee2mhz(u_int, u_int); struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *, int freq, int flags); struct ieee80211_channel *ieee80211_find_channel_byieee(struct ieee80211com *, int ieee, int flags); struct ieee80211_channel *ieee80211_lookup_channel_rxstatus(struct ieee80211vap *, const struct ieee80211_rx_stats *); int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode); enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *); uint32_t ieee80211_mac_hash(const struct ieee80211com *, const uint8_t addr[IEEE80211_ADDR_LEN]); char ieee80211_channel_type_char(const struct ieee80211_channel *c); void ieee80211_radiotap_attach(struct ieee80211com *, struct ieee80211_radiotap_header *th, int tlen, uint32_t tx_radiotap, struct ieee80211_radiotap_header *rh, int rlen, uint32_t rx_radiotap); void ieee80211_radiotap_attachv(struct ieee80211com *, struct ieee80211_radiotap_header *th, int tlen, int n_tx_v, uint32_t tx_radiotap, struct ieee80211_radiotap_header *rh, int rlen, int n_rx_v, uint32_t rx_radiotap); void ieee80211_radiotap_detach(struct ieee80211com *); void ieee80211_radiotap_vattach(struct ieee80211vap *); void ieee80211_radiotap_vdetach(struct ieee80211vap *); void ieee80211_radiotap_chan_change(struct ieee80211com *); void ieee80211_radiotap_tx(struct ieee80211vap *, struct mbuf *); void ieee80211_radiotap_rx(struct ieee80211vap *, struct mbuf *); void ieee80211_radiotap_rx_all(struct ieee80211com *, struct mbuf *); static __inline int ieee80211_radiotap_active(const struct ieee80211com *ic) { return (ic->ic_flags_ext & IEEE80211_FEXT_BPF) != 0; } static __inline int ieee80211_radiotap_active_vap(const struct ieee80211vap *vap) { return (vap->iv_flags_ext & IEEE80211_FEXT_BPF) || vap->iv_ic->ic_montaps != 0; } /* * Enqueue a task on the state thread. */ static __inline void ieee80211_runtask(struct ieee80211com *ic, struct task *task) { taskqueue_enqueue(ic->ic_tq, task); } /* * Wait for a queued task to complete. */ static __inline void ieee80211_draintask(struct ieee80211com *ic, struct task *task) { taskqueue_drain(ic->ic_tq, task); } /* * Key update synchronization methods. XXX should not be visible. */ static __inline void ieee80211_key_update_begin(struct ieee80211vap *vap) { vap->iv_key_update_begin(vap); } static __inline void ieee80211_key_update_end(struct ieee80211vap *vap) { vap->iv_key_update_end(vap); } /* * XXX these need to be here for IEEE80211_F_DATAPAD */ /* * Return the space occupied by the 802.11 header and any * padding required by the driver. This works for a * management or data frame. */ static __inline int ieee80211_hdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_hdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(uint32_t)); return size; } /* * Like ieee80211_hdrspace, but handles any type of frame. */ static __inline int ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_anyhdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(uint32_t)); return size; } /* * Notify a vap that beacon state has been updated. */ static __inline void ieee80211_beacon_notify(struct ieee80211vap *vap, int what) { if (vap->iv_state == IEEE80211_S_RUN) vap->iv_update_beacon(vap, what); } /* * Calculate HT channel promotion flags for a channel. * XXX belongs in ieee80211_ht.h but needs IEEE80211_FHT_* */ static __inline int ieee80211_htchanflags(const struct ieee80211_channel *c) { return IEEE80211_IS_CHAN_HT40(c) ? IEEE80211_FHT_HT | IEEE80211_FHT_USEHT40 : IEEE80211_IS_CHAN_HT(c) ? IEEE80211_FHT_HT : 0; } /* * Fetch the current TX power (cap) for the given node. * * This includes the node and ic/vap TX power limit as needed, * but it doesn't take into account any per-rate limit. */ static __inline uint16_t ieee80211_get_node_txpower(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; uint16_t txpower; txpower = ni->ni_txpower; txpower = MIN(txpower, ic->ic_txpowlimit); if (ic->ic_curchan != NULL) { txpower = MIN(txpower, 2 * ic->ic_curchan->ic_maxregpower); txpower = MIN(txpower, ic->ic_curchan->ic_maxpower); } return (txpower); } /* * Debugging facilities compiled in when IEEE80211_DEBUG is defined. * * The intent is that any problem in the net80211 layer can be * diagnosed by inspecting the statistics (dumped by the wlanstats * program) and/or the msgs generated by net80211. Messages are * broken into functional classes and can be controlled with the * wlandebug program. Certain of these msg groups are for facilities * that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1XSM). */ #define IEEE80211_MSG_11N 0x80000000 /* 11n mode debug */ #define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */ #define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */ #define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */ #define IEEE80211_MSG_INPUT 0x08000000 /* input handling */ #define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */ #define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */ #define IEEE80211_MSG_NODE 0x01000000 /* node handling */ #define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */ #define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */ #define IEEE80211_MSG_SCAN 0x00200000 /* scanning */ #define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */ #define IEEE80211_MSG_STATE 0x00080000 /* state machine */ #define IEEE80211_MSG_POWER 0x00040000 /* power save handling */ #define IEEE80211_MSG_HWMP 0x00020000 /* hybrid mesh protocol */ #define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */ #define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */ #define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */ #define IEEE80211_MSG_MESH 0x00002000 /* mesh networking */ #define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */ #define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */ #define IEEE80211_MSG_WME 0x00000400 /* WME protocol */ #define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */ #define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */ #define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */ #define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */ #define IEEE80211_MSG_RATECTL 0x00000020 /* tx rate control */ #define IEEE80211_MSG_ACTION 0x00000010 /* action frame handling */ #define IEEE80211_MSG_WDS 0x00000008 /* WDS handling */ #define IEEE80211_MSG_IOCTL 0x00000004 /* ioctl handling */ #define IEEE80211_MSG_TDMA 0x00000002 /* TDMA handling */ #define IEEE80211_MSG_ANY 0xffffffff /* anything */ #define IEEE80211_MSG_BITS \ "\20\2TDMA\3IOCTL\4WDS\5ACTION\6RATECTL\7ROAM\10INACT\11DOTH\12SUPERG" \ "\13WME\14ACL\15WPA\16RADKEYS\17RADDUMP\20RADIUS\21DOT1XSM\22HWMP" \ "\23POWER\24STATE\25OUTPUT\26SCAN\27AUTH\30ASSOC\31NODE\32ELEMID" \ "\33XRATE\34INPUT\35CRYPTO\36DUPMPKTS\37DEBUG\04011N" #ifdef IEEE80211_DEBUG #define ieee80211_msg(_vap, _m) ((_vap)->iv_debug & (_m)) #define IEEE80211_DPRINTF(_vap, _m, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note(_vap, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_mac(_vap, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_mac(_vap, _mac, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_frame(_vap, _wh, _fmt, __VA_ARGS__); \ } while (0) void ieee80211_note(const struct ieee80211vap *, const char *, ...); void ieee80211_note_mac(const struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], const char *, ...); void ieee80211_note_frame(const struct ieee80211vap *, const struct ieee80211_frame *, const char *, ...); #define ieee80211_msg_debug(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_DEBUG) #define ieee80211_msg_dumppkts(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_DUMPPKTS) #define ieee80211_msg_input(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_INPUT) #define ieee80211_msg_radius(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADIUS) #define ieee80211_msg_dumpradius(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADDUMP) #define ieee80211_msg_dumpradkeys(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADKEYS) #define ieee80211_msg_scan(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_SCAN) #define ieee80211_msg_assoc(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_ASSOC) /* * Emit a debug message about discarding a frame or information * element. One format is for extracting the mac address from * the frame header; the other is for when a header is not * available or otherwise appropriate. */ #define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_frame(_vap, _wh, _type, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_ie(_vap, _wh, _type, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_mac(_vap, _mac, _type, _fmt, __VA_ARGS__);\ } while (0) void ieee80211_discard_frame(const struct ieee80211vap *, const struct ieee80211_frame *, const char *type, const char *fmt, ...); void ieee80211_discard_ie(const struct ieee80211vap *, const struct ieee80211_frame *, const char *type, const char *fmt, ...); void ieee80211_discard_mac(const struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], const char *type, const char *fmt, ...); #else #define IEEE80211_DPRINTF(_vap, _m, _fmt, ...) #define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) #define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) #define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) #define ieee80211_msg_dumppkts(_vap) 0 #define ieee80211_msg(_vap, _m) 0 #define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) #define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) #define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) #endif #endif /* _NET80211_IEEE80211_VAR_H_ */