Index: head/sys/net80211/ieee80211.c =================================================================== --- head/sys/net80211/ieee80211.c (revision 283528) +++ head/sys/net80211/ieee80211.c (revision 283529) @@ -1,1769 +1,1782 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 generic handler */ #include "opt_wlan.h" #include #include #include - #include +#include + #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif #include #include const char *ieee80211_phymode_name[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = "auto", [IEEE80211_MODE_11A] = "11a", [IEEE80211_MODE_11B] = "11b", [IEEE80211_MODE_11G] = "11g", [IEEE80211_MODE_FH] = "FH", [IEEE80211_MODE_TURBO_A] = "turboA", [IEEE80211_MODE_TURBO_G] = "turboG", [IEEE80211_MODE_STURBO_A] = "sturboA", [IEEE80211_MODE_HALF] = "half", [IEEE80211_MODE_QUARTER] = "quarter", [IEEE80211_MODE_11NA] = "11na", [IEEE80211_MODE_11NG] = "11ng", }; /* map ieee80211_opmode to the corresponding capability bit */ const int ieee80211_opcap[IEEE80211_OPMODE_MAX] = { [IEEE80211_M_IBSS] = IEEE80211_C_IBSS, [IEEE80211_M_WDS] = IEEE80211_C_WDS, [IEEE80211_M_STA] = IEEE80211_C_STA, [IEEE80211_M_AHDEMO] = IEEE80211_C_AHDEMO, [IEEE80211_M_HOSTAP] = IEEE80211_C_HOSTAP, [IEEE80211_M_MONITOR] = IEEE80211_C_MONITOR, #ifdef IEEE80211_SUPPORT_MESH [IEEE80211_M_MBSS] = IEEE80211_C_MBSS, #endif }; static const uint8_t ieee80211broadcastaddr[IEEE80211_ADDR_LEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; static void ieee80211_syncflag_locked(struct ieee80211com *ic, int flag); static void ieee80211_syncflag_ht_locked(struct ieee80211com *ic, int flag); static void ieee80211_syncflag_ext_locked(struct ieee80211com *ic, int flag); static int ieee80211_media_setup(struct ieee80211com *ic, struct ifmedia *media, int caps, int addsta, ifm_change_cb_t media_change, ifm_stat_cb_t media_stat); static void ieee80211com_media_status(struct ifnet *, struct ifmediareq *); static int ieee80211com_media_change(struct ifnet *); static int media_status(enum ieee80211_opmode, const struct ieee80211_channel *); MALLOC_DEFINE(M_80211_VAP, "80211vap", "802.11 vap state"); /* * Default supported rates for 802.11 operation (in IEEE .5Mb units). */ #define B(r) ((r) | IEEE80211_RATE_BASIC) static const struct ieee80211_rateset ieee80211_rateset_11a = { 8, { B(12), 18, B(24), 36, B(48), 72, 96, 108 } }; static const struct ieee80211_rateset ieee80211_rateset_half = { 8, { B(6), 9, B(12), 18, B(24), 36, 48, 54 } }; static const struct ieee80211_rateset ieee80211_rateset_quarter = { 8, { B(3), 4, B(6), 9, B(12), 18, 24, 27 } }; static const struct ieee80211_rateset ieee80211_rateset_11b = { 4, { B(2), B(4), B(11), B(22) } }; /* NB: OFDM rates are handled specially based on mode */ static const struct ieee80211_rateset ieee80211_rateset_11g = { 12, { B(2), B(4), B(11), B(22), 12, 18, 24, 36, 48, 72, 96, 108 } }; #undef B /* * Fill in 802.11 available channel set, mark * all available channels as active, and pick * a default channel if not already specified. */ static void ieee80211_chan_init(struct ieee80211com *ic) { #define DEFAULTRATES(m, def) do { \ if (ic->ic_sup_rates[m].rs_nrates == 0) \ ic->ic_sup_rates[m] = def; \ } while (0) struct ieee80211_channel *c; int i; KASSERT(0 < ic->ic_nchans && ic->ic_nchans <= IEEE80211_CHAN_MAX, ("invalid number of channels specified: %u", ic->ic_nchans)); memset(ic->ic_chan_avail, 0, sizeof(ic->ic_chan_avail)); memset(ic->ic_modecaps, 0, sizeof(ic->ic_modecaps)); setbit(ic->ic_modecaps, IEEE80211_MODE_AUTO); for (i = 0; i < ic->ic_nchans; i++) { c = &ic->ic_channels[i]; KASSERT(c->ic_flags != 0, ("channel with no flags")); /* * Help drivers that work only with frequencies by filling * in IEEE channel #'s if not already calculated. Note this * mimics similar work done in ieee80211_setregdomain when * changing regulatory state. */ if (c->ic_ieee == 0) c->ic_ieee = ieee80211_mhz2ieee(c->ic_freq,c->ic_flags); if (IEEE80211_IS_CHAN_HT40(c) && c->ic_extieee == 0) c->ic_extieee = ieee80211_mhz2ieee(c->ic_freq + (IEEE80211_IS_CHAN_HT40U(c) ? 20 : -20), c->ic_flags); /* default max tx power to max regulatory */ if (c->ic_maxpower == 0) c->ic_maxpower = 2*c->ic_maxregpower; setbit(ic->ic_chan_avail, c->ic_ieee); /* * Identify mode capabilities. */ if (IEEE80211_IS_CHAN_A(c)) setbit(ic->ic_modecaps, IEEE80211_MODE_11A); if (IEEE80211_IS_CHAN_B(c)) setbit(ic->ic_modecaps, IEEE80211_MODE_11B); if (IEEE80211_IS_CHAN_ANYG(c)) setbit(ic->ic_modecaps, IEEE80211_MODE_11G); if (IEEE80211_IS_CHAN_FHSS(c)) setbit(ic->ic_modecaps, IEEE80211_MODE_FH); if (IEEE80211_IS_CHAN_108A(c)) setbit(ic->ic_modecaps, IEEE80211_MODE_TURBO_A); if (IEEE80211_IS_CHAN_108G(c)) setbit(ic->ic_modecaps, IEEE80211_MODE_TURBO_G); if (IEEE80211_IS_CHAN_ST(c)) setbit(ic->ic_modecaps, IEEE80211_MODE_STURBO_A); if (IEEE80211_IS_CHAN_HALF(c)) setbit(ic->ic_modecaps, IEEE80211_MODE_HALF); if (IEEE80211_IS_CHAN_QUARTER(c)) setbit(ic->ic_modecaps, IEEE80211_MODE_QUARTER); if (IEEE80211_IS_CHAN_HTA(c)) setbit(ic->ic_modecaps, IEEE80211_MODE_11NA); if (IEEE80211_IS_CHAN_HTG(c)) setbit(ic->ic_modecaps, IEEE80211_MODE_11NG); } /* initialize candidate channels to all available */ memcpy(ic->ic_chan_active, ic->ic_chan_avail, sizeof(ic->ic_chan_avail)); /* sort channel table to allow lookup optimizations */ ieee80211_sort_channels(ic->ic_channels, ic->ic_nchans); /* invalidate any previous state */ ic->ic_bsschan = IEEE80211_CHAN_ANYC; ic->ic_prevchan = NULL; ic->ic_csa_newchan = NULL; /* arbitrarily pick the first channel */ ic->ic_curchan = &ic->ic_channels[0]; ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan); /* fillin well-known rate sets if driver has not specified */ DEFAULTRATES(IEEE80211_MODE_11B, ieee80211_rateset_11b); DEFAULTRATES(IEEE80211_MODE_11G, ieee80211_rateset_11g); DEFAULTRATES(IEEE80211_MODE_11A, ieee80211_rateset_11a); DEFAULTRATES(IEEE80211_MODE_TURBO_A, ieee80211_rateset_11a); DEFAULTRATES(IEEE80211_MODE_TURBO_G, ieee80211_rateset_11g); DEFAULTRATES(IEEE80211_MODE_STURBO_A, ieee80211_rateset_11a); DEFAULTRATES(IEEE80211_MODE_HALF, ieee80211_rateset_half); DEFAULTRATES(IEEE80211_MODE_QUARTER, ieee80211_rateset_quarter); DEFAULTRATES(IEEE80211_MODE_11NA, ieee80211_rateset_11a); DEFAULTRATES(IEEE80211_MODE_11NG, ieee80211_rateset_11g); /* * Setup required information to fill the mcsset field, if driver did * not. Assume a 2T2R setup for historic reasons. */ if (ic->ic_rxstream == 0) ic->ic_rxstream = 2; if (ic->ic_txstream == 0) ic->ic_txstream = 2; /* * Set auto mode to reset active channel state and any desired channel. */ (void) ieee80211_setmode(ic, IEEE80211_MODE_AUTO); #undef DEFAULTRATES } static void null_update_mcast(struct ifnet *ifp) { if_printf(ifp, "need multicast update callback\n"); } static void null_update_promisc(struct ifnet *ifp) { if_printf(ifp, "need promiscuous mode update callback\n"); } static int null_transmit(struct ifnet *ifp, struct mbuf *m) { m_freem(m); if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); return EACCES; /* XXX EIO/EPERM? */ } #if __FreeBSD_version >= 1000031 static int null_output(struct ifnet *ifp, struct mbuf *m, const struct sockaddr *dst, struct route *ro) #else static int null_output(struct ifnet *ifp, struct mbuf *m, struct sockaddr *dst, struct route *ro) #endif { if_printf(ifp, "discard raw packet\n"); return null_transmit(ifp, m); } static void null_input(struct ifnet *ifp, struct mbuf *m) { if_printf(ifp, "if_input should not be called\n"); m_freem(m); } static void null_update_chw(struct ieee80211com *ic) { - if_printf(ic->ic_ifp, "%s: need callback\n", __func__); + ic_printf(ic, "%s: need callback\n", __func__); } +int +ic_printf(struct ieee80211com *ic, const char * fmt, ...) +{ + va_list ap; + int retval; + + retval = printf("%s: ", ic->ic_name); + va_start(ap, fmt); + retval += vprintf(fmt, ap); + va_end(ap); + return (retval); +} + /* * Attach/setup the common net80211 state. Called by * the driver on attach to prior to creating any vap's. */ void ieee80211_ifattach(struct ieee80211com *ic, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ifnet *ifp = ic->ic_ifp; struct sockaddr_dl *sdl; struct ifaddr *ifa; KASSERT(ifp->if_type == IFT_IEEE80211, ("if_type %d", ifp->if_type)); - IEEE80211_LOCK_INIT(ic, ifp->if_xname); - IEEE80211_TX_LOCK_INIT(ic, ifp->if_xname); + IEEE80211_LOCK_INIT(ic, ic->ic_name); + IEEE80211_TX_LOCK_INIT(ic, ic->ic_name); TAILQ_INIT(&ic->ic_vaps); /* Create a taskqueue for all state changes */ ic->ic_tq = taskqueue_create("ic_taskq", M_WAITOK | M_ZERO, taskqueue_thread_enqueue, &ic->ic_tq); taskqueue_start_threads(&ic->ic_tq, 1, PI_NET, "%s net80211 taskq", ifp->if_xname); /* * Fill in 802.11 available channel set, mark all * available channels as active, and pick a default * channel if not already specified. */ ieee80211_media_init(ic); ic->ic_update_mcast = null_update_mcast; ic->ic_update_promisc = null_update_promisc; ic->ic_update_chw = null_update_chw; ic->ic_hash_key = arc4random(); ic->ic_bintval = IEEE80211_BINTVAL_DEFAULT; ic->ic_lintval = ic->ic_bintval; ic->ic_txpowlimit = IEEE80211_TXPOWER_MAX; ieee80211_crypto_attach(ic); ieee80211_node_attach(ic); ieee80211_power_attach(ic); ieee80211_proto_attach(ic); #ifdef IEEE80211_SUPPORT_SUPERG ieee80211_superg_attach(ic); #endif ieee80211_ht_attach(ic); ieee80211_scan_attach(ic); ieee80211_regdomain_attach(ic); ieee80211_dfs_attach(ic); ieee80211_sysctl_attach(ic); ifp->if_addrlen = IEEE80211_ADDR_LEN; ifp->if_hdrlen = 0; CURVNET_SET(vnet0); if_attach(ifp); ifp->if_mtu = IEEE80211_MTU_MAX; ifp->if_broadcastaddr = ieee80211broadcastaddr; ifp->if_output = null_output; ifp->if_input = null_input; /* just in case */ ifp->if_resolvemulti = NULL; /* NB: callers check */ ifa = ifaddr_byindex(ifp->if_index); KASSERT(ifa != NULL, ("%s: no lladdr!\n", __func__)); sdl = (struct sockaddr_dl *)ifa->ifa_addr; sdl->sdl_type = IFT_ETHER; /* XXX IFT_IEEE80211? */ sdl->sdl_alen = IEEE80211_ADDR_LEN; IEEE80211_ADDR_COPY(LLADDR(sdl), macaddr); ifa_free(ifa); CURVNET_RESTORE(); } /* * Detach net80211 state on device detach. Tear down * all vap's and reclaim all common state prior to the * device state going away. Note we may call back into * driver; it must be prepared for this. */ void ieee80211_ifdetach(struct ieee80211com *ic) { struct ifnet *ifp = ic->ic_ifp; struct ieee80211vap *vap; /* * This detaches the main interface, but not the vaps. * Each VAP may be in a separate VIMAGE. */ CURVNET_SET(ifp->if_vnet); if_detach(ifp); CURVNET_RESTORE(); /* * The VAP is responsible for setting and clearing * the VIMAGE context. */ while ((vap = TAILQ_FIRST(&ic->ic_vaps)) != NULL) ieee80211_vap_destroy(vap); ieee80211_waitfor_parent(ic); ieee80211_sysctl_detach(ic); ieee80211_dfs_detach(ic); ieee80211_regdomain_detach(ic); ieee80211_scan_detach(ic); #ifdef IEEE80211_SUPPORT_SUPERG ieee80211_superg_detach(ic); #endif ieee80211_ht_detach(ic); /* NB: must be called before ieee80211_node_detach */ ieee80211_proto_detach(ic); ieee80211_crypto_detach(ic); ieee80211_power_detach(ic); ieee80211_node_detach(ic); /* XXX VNET needed? */ ifmedia_removeall(&ic->ic_media); taskqueue_free(ic->ic_tq); IEEE80211_TX_LOCK_DESTROY(ic); IEEE80211_LOCK_DESTROY(ic); } /* * Default reset method for use with the ioctl support. This * method is invoked after any state change in the 802.11 * layer that should be propagated to the hardware but not * require re-initialization of the 802.11 state machine (e.g * rescanning for an ap). We always return ENETRESET which * should cause the driver to re-initialize the device. Drivers * can override this method to implement more optimized support. */ static int default_reset(struct ieee80211vap *vap, u_long cmd) { return ENETRESET; } /* * Prepare a vap for use. Drivers use this call to * setup net80211 state in new vap's prior attaching * them with ieee80211_vap_attach (below). */ int ieee80211_vap_setup(struct ieee80211com *ic, struct ieee80211vap *vap, const char name[IFNAMSIZ], int unit, enum ieee80211_opmode opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ifnet *ifp; ifp = if_alloc(IFT_ETHER); if (ifp == NULL) { - if_printf(ic->ic_ifp, "%s: unable to allocate ifnet\n", + ic_printf(ic, "%s: unable to allocate ifnet\n", __func__); return ENOMEM; } if_initname(ifp, name, unit); ifp->if_softc = vap; /* back pointer */ ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST; ifp->if_transmit = ieee80211_vap_transmit; ifp->if_qflush = ieee80211_vap_qflush; ifp->if_ioctl = ieee80211_ioctl; ifp->if_init = ieee80211_init; vap->iv_ifp = ifp; vap->iv_ic = ic; vap->iv_flags = ic->ic_flags; /* propagate common flags */ vap->iv_flags_ext = ic->ic_flags_ext; vap->iv_flags_ven = ic->ic_flags_ven; vap->iv_caps = ic->ic_caps &~ IEEE80211_C_OPMODE; vap->iv_htcaps = ic->ic_htcaps; vap->iv_htextcaps = ic->ic_htextcaps; vap->iv_opmode = opmode; vap->iv_caps |= ieee80211_opcap[opmode]; switch (opmode) { case IEEE80211_M_WDS: /* * WDS links must specify the bssid of the far end. * For legacy operation this is a static relationship. * For non-legacy operation the station must associate * and be authorized to pass traffic. Plumbing the * vap to the proper node happens when the vap * transitions to RUN state. */ IEEE80211_ADDR_COPY(vap->iv_des_bssid, bssid); vap->iv_flags |= IEEE80211_F_DESBSSID; if (flags & IEEE80211_CLONE_WDSLEGACY) vap->iv_flags_ext |= IEEE80211_FEXT_WDSLEGACY; break; #ifdef IEEE80211_SUPPORT_TDMA case IEEE80211_M_AHDEMO: if (flags & IEEE80211_CLONE_TDMA) { /* NB: checked before clone operation allowed */ KASSERT(ic->ic_caps & IEEE80211_C_TDMA, ("not TDMA capable, ic_caps 0x%x", ic->ic_caps)); /* * Propagate TDMA capability to mark vap; this * cannot be removed and is used to distinguish * regular ahdemo operation from ahdemo+tdma. */ vap->iv_caps |= IEEE80211_C_TDMA; } break; #endif default: break; } /* auto-enable s/w beacon miss support */ if (flags & IEEE80211_CLONE_NOBEACONS) vap->iv_flags_ext |= IEEE80211_FEXT_SWBMISS; /* auto-generated or user supplied MAC address */ if (flags & (IEEE80211_CLONE_BSSID|IEEE80211_CLONE_MACADDR)) vap->iv_flags_ext |= IEEE80211_FEXT_UNIQMAC; /* * Enable various functionality by default if we're * capable; the driver can override us if it knows better. */ if (vap->iv_caps & IEEE80211_C_WME) vap->iv_flags |= IEEE80211_F_WME; if (vap->iv_caps & IEEE80211_C_BURST) vap->iv_flags |= IEEE80211_F_BURST; /* NB: bg scanning only makes sense for station mode right now */ if (vap->iv_opmode == IEEE80211_M_STA && (vap->iv_caps & IEEE80211_C_BGSCAN)) vap->iv_flags |= IEEE80211_F_BGSCAN; vap->iv_flags |= IEEE80211_F_DOTH; /* XXX no cap, just ena */ /* NB: DFS support only makes sense for ap mode right now */ if (vap->iv_opmode == IEEE80211_M_HOSTAP && (vap->iv_caps & IEEE80211_C_DFS)) vap->iv_flags_ext |= IEEE80211_FEXT_DFS; vap->iv_des_chan = IEEE80211_CHAN_ANYC; /* any channel is ok */ vap->iv_bmissthreshold = IEEE80211_HWBMISS_DEFAULT; vap->iv_dtim_period = IEEE80211_DTIM_DEFAULT; /* * Install a default reset method for the ioctl support; * the driver can override this. */ vap->iv_reset = default_reset; IEEE80211_ADDR_COPY(vap->iv_myaddr, macaddr); ieee80211_sysctl_vattach(vap); ieee80211_crypto_vattach(vap); ieee80211_node_vattach(vap); ieee80211_power_vattach(vap); ieee80211_proto_vattach(vap); #ifdef IEEE80211_SUPPORT_SUPERG ieee80211_superg_vattach(vap); #endif ieee80211_ht_vattach(vap); ieee80211_scan_vattach(vap); ieee80211_regdomain_vattach(vap); ieee80211_radiotap_vattach(vap); ieee80211_ratectl_set(vap, IEEE80211_RATECTL_NONE); return 0; } /* * Activate a vap. State should have been prepared with a * call to ieee80211_vap_setup and by the driver. On return * from this call the vap is ready for use. */ int ieee80211_vap_attach(struct ieee80211vap *vap, ifm_change_cb_t media_change, ifm_stat_cb_t media_stat) { struct ifnet *ifp = vap->iv_ifp; struct ieee80211com *ic = vap->iv_ic; struct ifmediareq imr; int maxrate; IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s parent %s flags 0x%x flags_ext 0x%x\n", __func__, ieee80211_opmode_name[vap->iv_opmode], - ic->ic_ifp->if_xname, vap->iv_flags, vap->iv_flags_ext); + ic->ic_name, vap->iv_flags, vap->iv_flags_ext); /* * Do late attach work that cannot happen until after * the driver has had a chance to override defaults. */ ieee80211_node_latevattach(vap); ieee80211_power_latevattach(vap); maxrate = ieee80211_media_setup(ic, &vap->iv_media, vap->iv_caps, vap->iv_opmode == IEEE80211_M_STA, media_change, media_stat); ieee80211_media_status(ifp, &imr); /* NB: strip explicit mode; we're actually in autoselect */ ifmedia_set(&vap->iv_media, imr.ifm_active &~ (IFM_MMASK | IFM_IEEE80211_TURBO)); if (maxrate) ifp->if_baudrate = IF_Mbps(maxrate); ether_ifattach(ifp, vap->iv_myaddr); /* hook output method setup by ether_ifattach */ vap->iv_output = ifp->if_output; ifp->if_output = ieee80211_output; /* NB: if_mtu set by ether_ifattach to ETHERMTU */ IEEE80211_LOCK(ic); TAILQ_INSERT_TAIL(&ic->ic_vaps, vap, iv_next); ieee80211_syncflag_locked(ic, IEEE80211_F_WME); #ifdef IEEE80211_SUPPORT_SUPERG ieee80211_syncflag_locked(ic, IEEE80211_F_TURBOP); #endif ieee80211_syncflag_locked(ic, IEEE80211_F_PCF); ieee80211_syncflag_locked(ic, IEEE80211_F_BURST); ieee80211_syncflag_ht_locked(ic, IEEE80211_FHT_HT); ieee80211_syncflag_ht_locked(ic, IEEE80211_FHT_USEHT40); ieee80211_syncifflag_locked(ic, IFF_PROMISC); ieee80211_syncifflag_locked(ic, IFF_ALLMULTI); IEEE80211_UNLOCK(ic); return 1; } /* * Tear down vap state and reclaim the ifnet. * The driver is assumed to have prepared for * this; e.g. by turning off interrupts for the * underlying device. */ void ieee80211_vap_detach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ifnet *ifp = vap->iv_ifp; CURVNET_SET(ifp->if_vnet); IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s parent %s\n", __func__, ieee80211_opmode_name[vap->iv_opmode], - ic->ic_ifp->if_xname); + ic->ic_name); /* NB: bpfdetach is called by ether_ifdetach and claims all taps */ ether_ifdetach(ifp); ieee80211_stop(vap); /* * Flush any deferred vap tasks. */ ieee80211_draintask(ic, &vap->iv_nstate_task); ieee80211_draintask(ic, &vap->iv_swbmiss_task); /* XXX band-aid until ifnet handles this for us */ taskqueue_drain(taskqueue_swi, &ifp->if_linktask); IEEE80211_LOCK(ic); KASSERT(vap->iv_state == IEEE80211_S_INIT , ("vap still running")); TAILQ_REMOVE(&ic->ic_vaps, vap, iv_next); ieee80211_syncflag_locked(ic, IEEE80211_F_WME); #ifdef IEEE80211_SUPPORT_SUPERG ieee80211_syncflag_locked(ic, IEEE80211_F_TURBOP); #endif ieee80211_syncflag_locked(ic, IEEE80211_F_PCF); ieee80211_syncflag_locked(ic, IEEE80211_F_BURST); ieee80211_syncflag_ht_locked(ic, IEEE80211_FHT_HT); ieee80211_syncflag_ht_locked(ic, IEEE80211_FHT_USEHT40); /* NB: this handles the bpfdetach done below */ ieee80211_syncflag_ext_locked(ic, IEEE80211_FEXT_BPF); ieee80211_syncifflag_locked(ic, IFF_PROMISC); ieee80211_syncifflag_locked(ic, IFF_ALLMULTI); IEEE80211_UNLOCK(ic); ifmedia_removeall(&vap->iv_media); ieee80211_radiotap_vdetach(vap); ieee80211_regdomain_vdetach(vap); ieee80211_scan_vdetach(vap); #ifdef IEEE80211_SUPPORT_SUPERG ieee80211_superg_vdetach(vap); #endif ieee80211_ht_vdetach(vap); /* NB: must be before ieee80211_node_vdetach */ ieee80211_proto_vdetach(vap); ieee80211_crypto_vdetach(vap); ieee80211_power_vdetach(vap); ieee80211_node_vdetach(vap); ieee80211_sysctl_vdetach(vap); if_free(ifp); CURVNET_RESTORE(); } /* * Synchronize flag bit state in the parent ifnet structure * according to the state of all vap ifnet's. This is used, * for example, to handle IFF_PROMISC and IFF_ALLMULTI. */ void ieee80211_syncifflag_locked(struct ieee80211com *ic, int flag) { struct ifnet *ifp = ic->ic_ifp; struct ieee80211vap *vap; int bit, oflags; IEEE80211_LOCK_ASSERT(ic); bit = 0; TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_ifp->if_flags & flag) { /* * XXX the bridge sets PROMISC but we don't want to * enable it on the device, discard here so all the * drivers don't need to special-case it */ if (flag == IFF_PROMISC && !(vap->iv_opmode == IEEE80211_M_MONITOR || (vap->iv_opmode == IEEE80211_M_AHDEMO && (vap->iv_caps & IEEE80211_C_TDMA) == 0))) continue; bit = 1; break; } oflags = ifp->if_flags; if (bit) ifp->if_flags |= flag; else ifp->if_flags &= ~flag; if ((ifp->if_flags ^ oflags) & flag) { /* XXX should we return 1/0 and let caller do this? */ if (ifp->if_drv_flags & IFF_DRV_RUNNING) { if (flag == IFF_PROMISC) ieee80211_runtask(ic, &ic->ic_promisc_task); else if (flag == IFF_ALLMULTI) ieee80211_runtask(ic, &ic->ic_mcast_task); } } } /* * Synchronize flag bit state in the com structure * according to the state of all vap's. This is used, * for example, to handle state changes via ioctls. */ static void ieee80211_syncflag_locked(struct ieee80211com *ic, int flag) { struct ieee80211vap *vap; int bit; IEEE80211_LOCK_ASSERT(ic); bit = 0; TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_flags & flag) { bit = 1; break; } if (bit) ic->ic_flags |= flag; else ic->ic_flags &= ~flag; } void ieee80211_syncflag(struct ieee80211vap *vap, int flag) { struct ieee80211com *ic = vap->iv_ic; IEEE80211_LOCK(ic); if (flag < 0) { flag = -flag; vap->iv_flags &= ~flag; } else vap->iv_flags |= flag; ieee80211_syncflag_locked(ic, flag); IEEE80211_UNLOCK(ic); } /* * Synchronize flags_ht bit state in the com structure * according to the state of all vap's. This is used, * for example, to handle state changes via ioctls. */ static void ieee80211_syncflag_ht_locked(struct ieee80211com *ic, int flag) { struct ieee80211vap *vap; int bit; IEEE80211_LOCK_ASSERT(ic); bit = 0; TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_flags_ht & flag) { bit = 1; break; } if (bit) ic->ic_flags_ht |= flag; else ic->ic_flags_ht &= ~flag; } void ieee80211_syncflag_ht(struct ieee80211vap *vap, int flag) { struct ieee80211com *ic = vap->iv_ic; IEEE80211_LOCK(ic); if (flag < 0) { flag = -flag; vap->iv_flags_ht &= ~flag; } else vap->iv_flags_ht |= flag; ieee80211_syncflag_ht_locked(ic, flag); IEEE80211_UNLOCK(ic); } /* * Synchronize flags_ext bit state in the com structure * according to the state of all vap's. This is used, * for example, to handle state changes via ioctls. */ static void ieee80211_syncflag_ext_locked(struct ieee80211com *ic, int flag) { struct ieee80211vap *vap; int bit; IEEE80211_LOCK_ASSERT(ic); bit = 0; TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_flags_ext & flag) { bit = 1; break; } if (bit) ic->ic_flags_ext |= flag; else ic->ic_flags_ext &= ~flag; } void ieee80211_syncflag_ext(struct ieee80211vap *vap, int flag) { struct ieee80211com *ic = vap->iv_ic; IEEE80211_LOCK(ic); if (flag < 0) { flag = -flag; vap->iv_flags_ext &= ~flag; } else vap->iv_flags_ext |= flag; ieee80211_syncflag_ext_locked(ic, flag); IEEE80211_UNLOCK(ic); } static __inline int mapgsm(u_int freq, u_int flags) { freq *= 10; if (flags & IEEE80211_CHAN_QUARTER) freq += 5; else if (flags & IEEE80211_CHAN_HALF) freq += 10; else freq += 20; /* NB: there is no 907/20 wide but leave room */ return (freq - 906*10) / 5; } static __inline int mappsb(u_int freq, u_int flags) { return 37 + ((freq * 10) + ((freq % 5) == 2 ? 5 : 0) - 49400) / 5; } /* * Convert MHz frequency to IEEE channel number. */ int ieee80211_mhz2ieee(u_int freq, u_int flags) { #define IS_FREQ_IN_PSB(_freq) ((_freq) > 4940 && (_freq) < 4990) if (flags & IEEE80211_CHAN_GSM) return mapgsm(freq, flags); if (flags & IEEE80211_CHAN_2GHZ) { /* 2GHz band */ if (freq == 2484) return 14; if (freq < 2484) return ((int) freq - 2407) / 5; else return 15 + ((freq - 2512) / 20); } else if (flags & IEEE80211_CHAN_5GHZ) { /* 5Ghz band */ if (freq <= 5000) { /* XXX check regdomain? */ if (IS_FREQ_IN_PSB(freq)) return mappsb(freq, flags); return (freq - 4000) / 5; } else return (freq - 5000) / 5; } else { /* either, guess */ if (freq == 2484) return 14; if (freq < 2484) { if (907 <= freq && freq <= 922) return mapgsm(freq, flags); return ((int) freq - 2407) / 5; } if (freq < 5000) { if (IS_FREQ_IN_PSB(freq)) return mappsb(freq, flags); else if (freq > 4900) return (freq - 4000) / 5; else return 15 + ((freq - 2512) / 20); } return (freq - 5000) / 5; } #undef IS_FREQ_IN_PSB } /* * Convert channel to IEEE channel number. */ int ieee80211_chan2ieee(struct ieee80211com *ic, const struct ieee80211_channel *c) { if (c == NULL) { - if_printf(ic->ic_ifp, "invalid channel (NULL)\n"); + ic_printf(ic, "invalid channel (NULL)\n"); return 0; /* XXX */ } return (c == IEEE80211_CHAN_ANYC ? IEEE80211_CHAN_ANY : c->ic_ieee); } /* * Convert IEEE channel number to MHz frequency. */ u_int ieee80211_ieee2mhz(u_int chan, u_int flags) { if (flags & IEEE80211_CHAN_GSM) return 907 + 5 * (chan / 10); if (flags & IEEE80211_CHAN_2GHZ) { /* 2GHz band */ if (chan == 14) return 2484; if (chan < 14) return 2407 + chan*5; else return 2512 + ((chan-15)*20); } else if (flags & IEEE80211_CHAN_5GHZ) {/* 5Ghz band */ if (flags & (IEEE80211_CHAN_HALF|IEEE80211_CHAN_QUARTER)) { chan -= 37; return 4940 + chan*5 + (chan % 5 ? 2 : 0); } return 5000 + (chan*5); } else { /* either, guess */ /* XXX can't distinguish PSB+GSM channels */ if (chan == 14) return 2484; if (chan < 14) /* 0-13 */ return 2407 + chan*5; if (chan < 27) /* 15-26 */ return 2512 + ((chan-15)*20); return 5000 + (chan*5); } } /* * Locate a channel given a frequency+flags. We cache * the previous lookup to optimize switching between two * channels--as happens with dynamic turbo. */ struct ieee80211_channel * ieee80211_find_channel(struct ieee80211com *ic, int freq, int flags) { struct ieee80211_channel *c; int i; flags &= IEEE80211_CHAN_ALLTURBO; c = ic->ic_prevchan; if (c != NULL && c->ic_freq == freq && (c->ic_flags & IEEE80211_CHAN_ALLTURBO) == flags) return c; /* brute force search */ for (i = 0; i < ic->ic_nchans; i++) { c = &ic->ic_channels[i]; if (c->ic_freq == freq && (c->ic_flags & IEEE80211_CHAN_ALLTURBO) == flags) return c; } return NULL; } /* * Locate a channel given a channel number+flags. We cache * the previous lookup to optimize switching between two * channels--as happens with dynamic turbo. */ struct ieee80211_channel * ieee80211_find_channel_byieee(struct ieee80211com *ic, int ieee, int flags) { struct ieee80211_channel *c; int i; flags &= IEEE80211_CHAN_ALLTURBO; c = ic->ic_prevchan; if (c != NULL && c->ic_ieee == ieee && (c->ic_flags & IEEE80211_CHAN_ALLTURBO) == flags) return c; /* brute force search */ for (i = 0; i < ic->ic_nchans; i++) { c = &ic->ic_channels[i]; if (c->ic_ieee == ieee && (c->ic_flags & IEEE80211_CHAN_ALLTURBO) == flags) return c; } return NULL; } static void addmedia(struct ifmedia *media, int caps, int addsta, int mode, int mword) { #define ADD(_ic, _s, _o) \ ifmedia_add(media, \ IFM_MAKEWORD(IFM_IEEE80211, (_s), (_o), 0), 0, NULL) static const u_int mopts[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = IFM_AUTO, [IEEE80211_MODE_11A] = IFM_IEEE80211_11A, [IEEE80211_MODE_11B] = IFM_IEEE80211_11B, [IEEE80211_MODE_11G] = IFM_IEEE80211_11G, [IEEE80211_MODE_FH] = IFM_IEEE80211_FH, [IEEE80211_MODE_TURBO_A] = IFM_IEEE80211_11A|IFM_IEEE80211_TURBO, [IEEE80211_MODE_TURBO_G] = IFM_IEEE80211_11G|IFM_IEEE80211_TURBO, [IEEE80211_MODE_STURBO_A] = IFM_IEEE80211_11A|IFM_IEEE80211_TURBO, [IEEE80211_MODE_HALF] = IFM_IEEE80211_11A, /* XXX */ [IEEE80211_MODE_QUARTER] = IFM_IEEE80211_11A, /* XXX */ [IEEE80211_MODE_11NA] = IFM_IEEE80211_11NA, [IEEE80211_MODE_11NG] = IFM_IEEE80211_11NG, }; u_int mopt; mopt = mopts[mode]; if (addsta) ADD(ic, mword, mopt); /* STA mode has no cap */ if (caps & IEEE80211_C_IBSS) ADD(media, mword, mopt | IFM_IEEE80211_ADHOC); if (caps & IEEE80211_C_HOSTAP) ADD(media, mword, mopt | IFM_IEEE80211_HOSTAP); if (caps & IEEE80211_C_AHDEMO) ADD(media, mword, mopt | IFM_IEEE80211_ADHOC | IFM_FLAG0); if (caps & IEEE80211_C_MONITOR) ADD(media, mword, mopt | IFM_IEEE80211_MONITOR); if (caps & IEEE80211_C_WDS) ADD(media, mword, mopt | IFM_IEEE80211_WDS); if (caps & IEEE80211_C_MBSS) ADD(media, mword, mopt | IFM_IEEE80211_MBSS); #undef ADD } /* * Setup the media data structures according to the channel and * rate tables. */ static int ieee80211_media_setup(struct ieee80211com *ic, struct ifmedia *media, int caps, int addsta, ifm_change_cb_t media_change, ifm_stat_cb_t media_stat) { int i, j, rate, maxrate, mword, r; enum ieee80211_phymode mode; const struct ieee80211_rateset *rs; struct ieee80211_rateset allrates; /* * Fill in media characteristics. */ ifmedia_init(media, 0, media_change, media_stat); maxrate = 0; /* * Add media for legacy operating modes. */ memset(&allrates, 0, sizeof(allrates)); for (mode = IEEE80211_MODE_AUTO; mode < IEEE80211_MODE_11NA; mode++) { if (isclr(ic->ic_modecaps, mode)) continue; addmedia(media, caps, addsta, mode, IFM_AUTO); if (mode == IEEE80211_MODE_AUTO) continue; rs = &ic->ic_sup_rates[mode]; for (i = 0; i < rs->rs_nrates; i++) { rate = rs->rs_rates[i]; mword = ieee80211_rate2media(ic, rate, mode); if (mword == 0) continue; addmedia(media, caps, addsta, mode, mword); /* * Add legacy rate to the collection of all rates. */ r = rate & IEEE80211_RATE_VAL; for (j = 0; j < allrates.rs_nrates; j++) if (allrates.rs_rates[j] == r) break; if (j == allrates.rs_nrates) { /* unique, add to the set */ allrates.rs_rates[j] = r; allrates.rs_nrates++; } rate = (rate & IEEE80211_RATE_VAL) / 2; if (rate > maxrate) maxrate = rate; } } for (i = 0; i < allrates.rs_nrates; i++) { mword = ieee80211_rate2media(ic, allrates.rs_rates[i], IEEE80211_MODE_AUTO); if (mword == 0) continue; /* NB: remove media options from mword */ addmedia(media, caps, addsta, IEEE80211_MODE_AUTO, IFM_SUBTYPE(mword)); } /* * Add HT/11n media. Note that we do not have enough * bits in the media subtype to express the MCS so we * use a "placeholder" media subtype and any fixed MCS * must be specified with a different mechanism. */ for (; mode <= IEEE80211_MODE_11NG; mode++) { if (isclr(ic->ic_modecaps, mode)) continue; addmedia(media, caps, addsta, mode, IFM_AUTO); addmedia(media, caps, addsta, mode, IFM_IEEE80211_MCS); } if (isset(ic->ic_modecaps, IEEE80211_MODE_11NA) || isset(ic->ic_modecaps, IEEE80211_MODE_11NG)) { addmedia(media, caps, addsta, IEEE80211_MODE_AUTO, IFM_IEEE80211_MCS); i = ic->ic_txstream * 8 - 1; if ((ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) && (ic->ic_htcaps & IEEE80211_HTCAP_SHORTGI40)) rate = ieee80211_htrates[i].ht40_rate_400ns; else if ((ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40)) rate = ieee80211_htrates[i].ht40_rate_800ns; else if ((ic->ic_htcaps & IEEE80211_HTCAP_SHORTGI20)) rate = ieee80211_htrates[i].ht20_rate_400ns; else rate = ieee80211_htrates[i].ht20_rate_800ns; if (rate > maxrate) maxrate = rate; } return maxrate; } void ieee80211_media_init(struct ieee80211com *ic) { struct ifnet *ifp = ic->ic_ifp; int maxrate; /* NB: this works because the structure is initialized to zero */ if (!LIST_EMPTY(&ic->ic_media.ifm_list)) { /* * We are re-initializing the channel list; clear * the existing media state as the media routines * don't suppress duplicates. */ ifmedia_removeall(&ic->ic_media); } ieee80211_chan_init(ic); /* * Recalculate media settings in case new channel list changes * the set of available modes. */ maxrate = ieee80211_media_setup(ic, &ic->ic_media, ic->ic_caps, 1, ieee80211com_media_change, ieee80211com_media_status); /* NB: strip explicit mode; we're actually in autoselect */ ifmedia_set(&ic->ic_media, media_status(ic->ic_opmode, ic->ic_curchan) &~ (IFM_MMASK | IFM_IEEE80211_TURBO)); if (maxrate) ifp->if_baudrate = IF_Mbps(maxrate); /* XXX need to propagate new media settings to vap's */ } /* XXX inline or eliminate? */ const struct ieee80211_rateset * ieee80211_get_suprates(struct ieee80211com *ic, const struct ieee80211_channel *c) { /* XXX does this work for 11ng basic rates? */ return &ic->ic_sup_rates[ieee80211_chan2mode(c)]; } void ieee80211_announce(struct ieee80211com *ic) { - struct ifnet *ifp = ic->ic_ifp; int i, rate, mword; enum ieee80211_phymode mode; const struct ieee80211_rateset *rs; /* NB: skip AUTO since it has no rates */ for (mode = IEEE80211_MODE_AUTO+1; mode < IEEE80211_MODE_11NA; mode++) { if (isclr(ic->ic_modecaps, mode)) continue; - if_printf(ifp, "%s rates: ", ieee80211_phymode_name[mode]); + ic_printf(ic, "%s rates: ", ieee80211_phymode_name[mode]); rs = &ic->ic_sup_rates[mode]; for (i = 0; i < rs->rs_nrates; i++) { mword = ieee80211_rate2media(ic, rs->rs_rates[i], mode); if (mword == 0) continue; rate = ieee80211_media2rate(mword); printf("%s%d%sMbps", (i != 0 ? " " : ""), rate / 2, ((rate & 0x1) != 0 ? ".5" : "")); } printf("\n"); } ieee80211_ht_announce(ic); } void ieee80211_announce_channels(struct ieee80211com *ic) { const struct ieee80211_channel *c; char type; int i, cw; printf("Chan Freq CW RegPwr MinPwr MaxPwr\n"); for (i = 0; i < ic->ic_nchans; i++) { c = &ic->ic_channels[i]; if (IEEE80211_IS_CHAN_ST(c)) type = 'S'; else if (IEEE80211_IS_CHAN_108A(c)) type = 'T'; else if (IEEE80211_IS_CHAN_108G(c)) type = 'G'; else if (IEEE80211_IS_CHAN_HT(c)) type = 'n'; else if (IEEE80211_IS_CHAN_A(c)) type = 'a'; else if (IEEE80211_IS_CHAN_ANYG(c)) type = 'g'; else if (IEEE80211_IS_CHAN_B(c)) type = 'b'; else type = 'f'; if (IEEE80211_IS_CHAN_HT40(c) || IEEE80211_IS_CHAN_TURBO(c)) cw = 40; else if (IEEE80211_IS_CHAN_HALF(c)) cw = 10; else if (IEEE80211_IS_CHAN_QUARTER(c)) cw = 5; else cw = 20; printf("%4d %4d%c %2d%c %6d %4d.%d %4d.%d\n" , c->ic_ieee, c->ic_freq, type , cw , IEEE80211_IS_CHAN_HT40U(c) ? '+' : IEEE80211_IS_CHAN_HT40D(c) ? '-' : ' ' , c->ic_maxregpower , c->ic_minpower / 2, c->ic_minpower & 1 ? 5 : 0 , c->ic_maxpower / 2, c->ic_maxpower & 1 ? 5 : 0 ); } } static int media2mode(const struct ifmedia_entry *ime, uint32_t flags, uint16_t *mode) { switch (IFM_MODE(ime->ifm_media)) { case IFM_IEEE80211_11A: *mode = IEEE80211_MODE_11A; break; case IFM_IEEE80211_11B: *mode = IEEE80211_MODE_11B; break; case IFM_IEEE80211_11G: *mode = IEEE80211_MODE_11G; break; case IFM_IEEE80211_FH: *mode = IEEE80211_MODE_FH; break; case IFM_IEEE80211_11NA: *mode = IEEE80211_MODE_11NA; break; case IFM_IEEE80211_11NG: *mode = IEEE80211_MODE_11NG; break; case IFM_AUTO: *mode = IEEE80211_MODE_AUTO; break; default: return 0; } /* * Turbo mode is an ``option''. * XXX does not apply to AUTO */ if (ime->ifm_media & IFM_IEEE80211_TURBO) { if (*mode == IEEE80211_MODE_11A) { if (flags & IEEE80211_F_TURBOP) *mode = IEEE80211_MODE_TURBO_A; else *mode = IEEE80211_MODE_STURBO_A; } else if (*mode == IEEE80211_MODE_11G) *mode = IEEE80211_MODE_TURBO_G; else return 0; } /* XXX HT40 +/- */ return 1; } /* * Handle a media change request on the underlying interface. */ int ieee80211com_media_change(struct ifnet *ifp) { return EINVAL; } /* * Handle a media change request on the vap interface. */ int ieee80211_media_change(struct ifnet *ifp) { struct ieee80211vap *vap = ifp->if_softc; struct ifmedia_entry *ime = vap->iv_media.ifm_cur; uint16_t newmode; if (!media2mode(ime, vap->iv_flags, &newmode)) return EINVAL; if (vap->iv_des_mode != newmode) { vap->iv_des_mode = newmode; /* XXX kick state machine if up+running */ } return 0; } /* * Common code to calculate the media status word * from the operating mode and channel state. */ static int media_status(enum ieee80211_opmode opmode, const struct ieee80211_channel *chan) { int status; status = IFM_IEEE80211; switch (opmode) { case IEEE80211_M_STA: break; case IEEE80211_M_IBSS: status |= IFM_IEEE80211_ADHOC; break; case IEEE80211_M_HOSTAP: status |= IFM_IEEE80211_HOSTAP; break; case IEEE80211_M_MONITOR: status |= IFM_IEEE80211_MONITOR; break; case IEEE80211_M_AHDEMO: status |= IFM_IEEE80211_ADHOC | IFM_FLAG0; break; case IEEE80211_M_WDS: status |= IFM_IEEE80211_WDS; break; case IEEE80211_M_MBSS: status |= IFM_IEEE80211_MBSS; break; } if (IEEE80211_IS_CHAN_HTA(chan)) { status |= IFM_IEEE80211_11NA; } else if (IEEE80211_IS_CHAN_HTG(chan)) { status |= IFM_IEEE80211_11NG; } else if (IEEE80211_IS_CHAN_A(chan)) { status |= IFM_IEEE80211_11A; } else if (IEEE80211_IS_CHAN_B(chan)) { status |= IFM_IEEE80211_11B; } else if (IEEE80211_IS_CHAN_ANYG(chan)) { status |= IFM_IEEE80211_11G; } else if (IEEE80211_IS_CHAN_FHSS(chan)) { status |= IFM_IEEE80211_FH; } /* XXX else complain? */ if (IEEE80211_IS_CHAN_TURBO(chan)) status |= IFM_IEEE80211_TURBO; #if 0 if (IEEE80211_IS_CHAN_HT20(chan)) status |= IFM_IEEE80211_HT20; if (IEEE80211_IS_CHAN_HT40(chan)) status |= IFM_IEEE80211_HT40; #endif return status; } static void ieee80211com_media_status(struct ifnet *ifp, struct ifmediareq *imr) { struct ieee80211com *ic = ifp->if_l2com; struct ieee80211vap *vap; imr->ifm_status = IFM_AVALID; TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_ifp->if_flags & IFF_UP) { imr->ifm_status |= IFM_ACTIVE; break; } imr->ifm_active = media_status(ic->ic_opmode, ic->ic_curchan); if (imr->ifm_status & IFM_ACTIVE) imr->ifm_current = imr->ifm_active; } void ieee80211_media_status(struct ifnet *ifp, struct ifmediareq *imr) { struct ieee80211vap *vap = ifp->if_softc; struct ieee80211com *ic = vap->iv_ic; enum ieee80211_phymode mode; imr->ifm_status = IFM_AVALID; /* * NB: use the current channel's mode to lock down a xmit * rate only when running; otherwise we may have a mismatch * in which case the rate will not be convertible. */ if (vap->iv_state == IEEE80211_S_RUN || vap->iv_state == IEEE80211_S_SLEEP) { imr->ifm_status |= IFM_ACTIVE; mode = ieee80211_chan2mode(ic->ic_curchan); } else mode = IEEE80211_MODE_AUTO; imr->ifm_active = media_status(vap->iv_opmode, ic->ic_curchan); /* * Calculate a current rate if possible. */ if (vap->iv_txparms[mode].ucastrate != IEEE80211_FIXED_RATE_NONE) { /* * A fixed rate is set, report that. */ imr->ifm_active |= ieee80211_rate2media(ic, vap->iv_txparms[mode].ucastrate, mode); } else if (vap->iv_opmode == IEEE80211_M_STA) { /* * In station mode report the current transmit rate. */ imr->ifm_active |= ieee80211_rate2media(ic, vap->iv_bss->ni_txrate, mode); } else imr->ifm_active |= IFM_AUTO; if (imr->ifm_status & IFM_ACTIVE) imr->ifm_current = imr->ifm_active; } /* * Set the current phy mode and recalculate the active channel * set based on the available channels for this mode. Also * select a new default/current channel if the current one is * inappropriate for this mode. */ int ieee80211_setmode(struct ieee80211com *ic, enum ieee80211_phymode mode) { /* * Adjust basic rates in 11b/11g supported rate set. * Note that if operating on a hal/quarter rate channel * this is a noop as those rates sets are different * and used instead. */ if (mode == IEEE80211_MODE_11G || mode == IEEE80211_MODE_11B) ieee80211_setbasicrates(&ic->ic_sup_rates[mode], mode); ic->ic_curmode = mode; ieee80211_reset_erp(ic); /* reset ERP state */ return 0; } /* * Return the phy mode for with the specified channel. */ enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *chan) { if (IEEE80211_IS_CHAN_HTA(chan)) return IEEE80211_MODE_11NA; else if (IEEE80211_IS_CHAN_HTG(chan)) return IEEE80211_MODE_11NG; else if (IEEE80211_IS_CHAN_108G(chan)) return IEEE80211_MODE_TURBO_G; else if (IEEE80211_IS_CHAN_ST(chan)) return IEEE80211_MODE_STURBO_A; else if (IEEE80211_IS_CHAN_TURBO(chan)) return IEEE80211_MODE_TURBO_A; else if (IEEE80211_IS_CHAN_HALF(chan)) return IEEE80211_MODE_HALF; else if (IEEE80211_IS_CHAN_QUARTER(chan)) return IEEE80211_MODE_QUARTER; else if (IEEE80211_IS_CHAN_A(chan)) return IEEE80211_MODE_11A; else if (IEEE80211_IS_CHAN_ANYG(chan)) return IEEE80211_MODE_11G; else if (IEEE80211_IS_CHAN_B(chan)) return IEEE80211_MODE_11B; else if (IEEE80211_IS_CHAN_FHSS(chan)) return IEEE80211_MODE_FH; /* NB: should not get here */ printf("%s: cannot map channel to mode; freq %u flags 0x%x\n", __func__, chan->ic_freq, chan->ic_flags); return IEEE80211_MODE_11B; } struct ratemedia { u_int match; /* rate + mode */ u_int media; /* if_media rate */ }; static int findmedia(const struct ratemedia rates[], int n, u_int match) { int i; for (i = 0; i < n; i++) if (rates[i].match == match) return rates[i].media; return IFM_AUTO; } /* * Convert IEEE80211 rate value to ifmedia subtype. * Rate is either a legacy rate in units of 0.5Mbps * or an MCS index. */ int ieee80211_rate2media(struct ieee80211com *ic, int rate, enum ieee80211_phymode mode) { static const struct ratemedia rates[] = { { 2 | IFM_IEEE80211_FH, IFM_IEEE80211_FH1 }, { 4 | IFM_IEEE80211_FH, IFM_IEEE80211_FH2 }, { 2 | IFM_IEEE80211_11B, IFM_IEEE80211_DS1 }, { 4 | IFM_IEEE80211_11B, IFM_IEEE80211_DS2 }, { 11 | IFM_IEEE80211_11B, IFM_IEEE80211_DS5 }, { 22 | IFM_IEEE80211_11B, IFM_IEEE80211_DS11 }, { 44 | IFM_IEEE80211_11B, IFM_IEEE80211_DS22 }, { 12 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM6 }, { 18 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM9 }, { 24 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM12 }, { 36 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM18 }, { 48 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM24 }, { 72 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM36 }, { 96 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM48 }, { 108 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM54 }, { 2 | IFM_IEEE80211_11G, IFM_IEEE80211_DS1 }, { 4 | IFM_IEEE80211_11G, IFM_IEEE80211_DS2 }, { 11 | IFM_IEEE80211_11G, IFM_IEEE80211_DS5 }, { 22 | IFM_IEEE80211_11G, IFM_IEEE80211_DS11 }, { 12 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM6 }, { 18 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM9 }, { 24 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM12 }, { 36 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM18 }, { 48 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM24 }, { 72 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM36 }, { 96 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM48 }, { 108 | IFM_IEEE80211_11G, IFM_IEEE80211_OFDM54 }, { 6 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM3 }, { 9 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM4 }, { 54 | IFM_IEEE80211_11A, IFM_IEEE80211_OFDM27 }, /* NB: OFDM72 doesn't realy exist so we don't handle it */ }; static const struct ratemedia htrates[] = { { 0, IFM_IEEE80211_MCS }, { 1, IFM_IEEE80211_MCS }, { 2, IFM_IEEE80211_MCS }, { 3, IFM_IEEE80211_MCS }, { 4, IFM_IEEE80211_MCS }, { 5, IFM_IEEE80211_MCS }, { 6, IFM_IEEE80211_MCS }, { 7, IFM_IEEE80211_MCS }, { 8, IFM_IEEE80211_MCS }, { 9, IFM_IEEE80211_MCS }, { 10, IFM_IEEE80211_MCS }, { 11, IFM_IEEE80211_MCS }, { 12, IFM_IEEE80211_MCS }, { 13, IFM_IEEE80211_MCS }, { 14, IFM_IEEE80211_MCS }, { 15, IFM_IEEE80211_MCS }, { 16, IFM_IEEE80211_MCS }, { 17, IFM_IEEE80211_MCS }, { 18, IFM_IEEE80211_MCS }, { 19, IFM_IEEE80211_MCS }, { 20, IFM_IEEE80211_MCS }, { 21, IFM_IEEE80211_MCS }, { 22, IFM_IEEE80211_MCS }, { 23, IFM_IEEE80211_MCS }, { 24, IFM_IEEE80211_MCS }, { 25, IFM_IEEE80211_MCS }, { 26, IFM_IEEE80211_MCS }, { 27, IFM_IEEE80211_MCS }, { 28, IFM_IEEE80211_MCS }, { 29, IFM_IEEE80211_MCS }, { 30, IFM_IEEE80211_MCS }, { 31, IFM_IEEE80211_MCS }, { 32, IFM_IEEE80211_MCS }, { 33, IFM_IEEE80211_MCS }, { 34, IFM_IEEE80211_MCS }, { 35, IFM_IEEE80211_MCS }, { 36, IFM_IEEE80211_MCS }, { 37, IFM_IEEE80211_MCS }, { 38, IFM_IEEE80211_MCS }, { 39, IFM_IEEE80211_MCS }, { 40, IFM_IEEE80211_MCS }, { 41, IFM_IEEE80211_MCS }, { 42, IFM_IEEE80211_MCS }, { 43, IFM_IEEE80211_MCS }, { 44, IFM_IEEE80211_MCS }, { 45, IFM_IEEE80211_MCS }, { 46, IFM_IEEE80211_MCS }, { 47, IFM_IEEE80211_MCS }, { 48, IFM_IEEE80211_MCS }, { 49, IFM_IEEE80211_MCS }, { 50, IFM_IEEE80211_MCS }, { 51, IFM_IEEE80211_MCS }, { 52, IFM_IEEE80211_MCS }, { 53, IFM_IEEE80211_MCS }, { 54, IFM_IEEE80211_MCS }, { 55, IFM_IEEE80211_MCS }, { 56, IFM_IEEE80211_MCS }, { 57, IFM_IEEE80211_MCS }, { 58, IFM_IEEE80211_MCS }, { 59, IFM_IEEE80211_MCS }, { 60, IFM_IEEE80211_MCS }, { 61, IFM_IEEE80211_MCS }, { 62, IFM_IEEE80211_MCS }, { 63, IFM_IEEE80211_MCS }, { 64, IFM_IEEE80211_MCS }, { 65, IFM_IEEE80211_MCS }, { 66, IFM_IEEE80211_MCS }, { 67, IFM_IEEE80211_MCS }, { 68, IFM_IEEE80211_MCS }, { 69, IFM_IEEE80211_MCS }, { 70, IFM_IEEE80211_MCS }, { 71, IFM_IEEE80211_MCS }, { 72, IFM_IEEE80211_MCS }, { 73, IFM_IEEE80211_MCS }, { 74, IFM_IEEE80211_MCS }, { 75, IFM_IEEE80211_MCS }, { 76, IFM_IEEE80211_MCS }, }; int m; /* * Check 11n rates first for match as an MCS. */ if (mode == IEEE80211_MODE_11NA) { if (rate & IEEE80211_RATE_MCS) { rate &= ~IEEE80211_RATE_MCS; m = findmedia(htrates, nitems(htrates), rate); if (m != IFM_AUTO) return m | IFM_IEEE80211_11NA; } } else if (mode == IEEE80211_MODE_11NG) { /* NB: 12 is ambiguous, it will be treated as an MCS */ if (rate & IEEE80211_RATE_MCS) { rate &= ~IEEE80211_RATE_MCS; m = findmedia(htrates, nitems(htrates), rate); if (m != IFM_AUTO) return m | IFM_IEEE80211_11NG; } } rate &= IEEE80211_RATE_VAL; switch (mode) { case IEEE80211_MODE_11A: case IEEE80211_MODE_HALF: /* XXX good 'nuf */ case IEEE80211_MODE_QUARTER: case IEEE80211_MODE_11NA: case IEEE80211_MODE_TURBO_A: case IEEE80211_MODE_STURBO_A: return findmedia(rates, nitems(rates), rate | IFM_IEEE80211_11A); case IEEE80211_MODE_11B: return findmedia(rates, nitems(rates), rate | IFM_IEEE80211_11B); case IEEE80211_MODE_FH: return findmedia(rates, nitems(rates), rate | IFM_IEEE80211_FH); case IEEE80211_MODE_AUTO: /* NB: ic may be NULL for some drivers */ if (ic != NULL && ic->ic_phytype == IEEE80211_T_FH) return findmedia(rates, nitems(rates), rate | IFM_IEEE80211_FH); /* NB: hack, 11g matches both 11b+11a rates */ /* fall thru... */ case IEEE80211_MODE_11G: case IEEE80211_MODE_11NG: case IEEE80211_MODE_TURBO_G: return findmedia(rates, nitems(rates), rate | IFM_IEEE80211_11G); } return IFM_AUTO; } int ieee80211_media2rate(int mword) { static const int ieeerates[] = { -1, /* IFM_AUTO */ 0, /* IFM_MANUAL */ 0, /* IFM_NONE */ 2, /* IFM_IEEE80211_FH1 */ 4, /* IFM_IEEE80211_FH2 */ 2, /* IFM_IEEE80211_DS1 */ 4, /* IFM_IEEE80211_DS2 */ 11, /* IFM_IEEE80211_DS5 */ 22, /* IFM_IEEE80211_DS11 */ 44, /* IFM_IEEE80211_DS22 */ 12, /* IFM_IEEE80211_OFDM6 */ 18, /* IFM_IEEE80211_OFDM9 */ 24, /* IFM_IEEE80211_OFDM12 */ 36, /* IFM_IEEE80211_OFDM18 */ 48, /* IFM_IEEE80211_OFDM24 */ 72, /* IFM_IEEE80211_OFDM36 */ 96, /* IFM_IEEE80211_OFDM48 */ 108, /* IFM_IEEE80211_OFDM54 */ 144, /* IFM_IEEE80211_OFDM72 */ 0, /* IFM_IEEE80211_DS354k */ 0, /* IFM_IEEE80211_DS512k */ 6, /* IFM_IEEE80211_OFDM3 */ 9, /* IFM_IEEE80211_OFDM4 */ 54, /* IFM_IEEE80211_OFDM27 */ -1, /* IFM_IEEE80211_MCS */ }; return IFM_SUBTYPE(mword) < nitems(ieeerates) ? ieeerates[IFM_SUBTYPE(mword)] : 0; } /* * The following hash function is adapted from "Hash Functions" by Bob Jenkins * ("Algorithm Alley", Dr. Dobbs Journal, September 1997). */ #define mix(a, b, c) \ do { \ a -= b; a -= c; a ^= (c >> 13); \ b -= c; b -= a; b ^= (a << 8); \ c -= a; c -= b; c ^= (b >> 13); \ a -= b; a -= c; a ^= (c >> 12); \ b -= c; b -= a; b ^= (a << 16); \ c -= a; c -= b; c ^= (b >> 5); \ a -= b; a -= c; a ^= (c >> 3); \ b -= c; b -= a; b ^= (a << 10); \ c -= a; c -= b; c ^= (b >> 15); \ } while (/*CONSTCOND*/0) uint32_t ieee80211_mac_hash(const struct ieee80211com *ic, const uint8_t addr[IEEE80211_ADDR_LEN]) { uint32_t a = 0x9e3779b9, b = 0x9e3779b9, c = ic->ic_hash_key; b += addr[5] << 8; b += addr[4]; a += addr[3] << 24; a += addr[2] << 16; a += addr[1] << 8; a += addr[0]; mix(a, b, c); return c; } #undef mix char ieee80211_channel_type_char(const struct ieee80211_channel *c) { if (IEEE80211_IS_CHAN_ST(c)) return 'S'; if (IEEE80211_IS_CHAN_108A(c)) return 'T'; if (IEEE80211_IS_CHAN_108G(c)) return 'G'; if (IEEE80211_IS_CHAN_HT(c)) return 'n'; if (IEEE80211_IS_CHAN_A(c)) return 'a'; if (IEEE80211_IS_CHAN_ANYG(c)) return 'g'; if (IEEE80211_IS_CHAN_B(c)) return 'b'; return 'f'; } Index: head/sys/net80211/ieee80211_ddb.c =================================================================== --- head/sys/net80211/ieee80211_ddb.c (revision 283528) +++ head/sys/net80211/ieee80211_ddb.c (revision 283529) @@ -1,898 +1,899 @@ /*- * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_ddb.h" #include "opt_wlan.h" #ifdef DDB /* * IEEE 802.11 DDB support */ #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_TDMA #include #endif #ifdef IEEE80211_SUPPORT_MESH #include #endif #include #include #define DB_PRINTSYM(prefix, name, addr) do { \ db_printf("%s%-25s : ", prefix, name); \ db_printsym((db_addr_t) addr, DB_STGY_ANY); \ db_printf("\n"); \ } while (0) static void _db_show_sta(const struct ieee80211_node *); static void _db_show_vap(const struct ieee80211vap *, int, int); static void _db_show_com(const struct ieee80211com *, int showvaps, int showsta, int showmesh, int showprocs); static void _db_show_node_table(const char *tag, const struct ieee80211_node_table *); static void _db_show_channel(const char *tag, const struct ieee80211_channel *); static void _db_show_ssid(const char *tag, int ix, int len, const uint8_t *); static void _db_show_appie(const char *tag, const struct ieee80211_appie *); static void _db_show_key(const char *tag, int ix, const struct ieee80211_key *); static void _db_show_roamparams(const char *tag, const void *arg, const struct ieee80211_roamparam *rp); static void _db_show_txparams(const char *tag, const void *arg, const struct ieee80211_txparam *tp); static void _db_show_ageq(const char *tag, const struct ieee80211_ageq *q); static void _db_show_stats(const struct ieee80211_stats *); #ifdef IEEE80211_SUPPORT_MESH static void _db_show_mesh(const struct ieee80211_mesh_state *); #endif DB_SHOW_COMMAND(sta, db_show_sta) { if (!have_addr) { db_printf("usage: show sta \n"); return; } _db_show_sta((const struct ieee80211_node *) addr); } DB_SHOW_COMMAND(statab, db_show_statab) { if (!have_addr) { db_printf("usage: show statab \n"); return; } _db_show_node_table("", (const struct ieee80211_node_table *) addr); } DB_SHOW_COMMAND(vap, db_show_vap) { int i, showmesh = 0, showprocs = 0; if (!have_addr) { db_printf("usage: show vap \n"); return; } for (i = 0; modif[i] != '\0'; i++) switch (modif[i]) { case 'a': showprocs = 1; showmesh = 1; break; case 'm': showmesh = 1; break; case 'p': showprocs = 1; break; } _db_show_vap((const struct ieee80211vap *) addr, showmesh, showprocs); } DB_SHOW_COMMAND(com, db_show_com) { const struct ieee80211com *ic; int i, showprocs = 0, showvaps = 0, showsta = 0, showmesh = 0; if (!have_addr) { db_printf("usage: show com \n"); return; } for (i = 0; modif[i] != '\0'; i++) switch (modif[i]) { case 'a': showsta = showmesh = showvaps = showprocs = 1; break; case 's': showsta = 1; break; case 'm': showmesh = 1; break; case 'v': showvaps = 1; break; case 'p': showprocs = 1; break; } ic = (const struct ieee80211com *) addr; _db_show_com(ic, showvaps, showsta, showmesh, showprocs); } DB_SHOW_ALL_COMMAND(vaps, db_show_all_vaps) { VNET_ITERATOR_DECL(vnet_iter); const struct ifnet *ifp; int i, showall = 0; for (i = 0; modif[i] != '\0'; i++) switch (modif[i]) { case 'a': showall = 1; break; } VNET_FOREACH(vnet_iter) { TAILQ_FOREACH(ifp, &V_ifnet, if_list) if (ifp->if_type == IFT_IEEE80211) { const struct ieee80211com *ic = ifp->if_l2com; if (!showall) { const struct ieee80211vap *vap; db_printf("%s: com %p vaps:", ifp->if_xname, ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) db_printf(" %s(%p)", vap->iv_ifp->if_xname, vap); db_printf("\n"); } else _db_show_com(ic, 1, 1, 1, 1); } } } #ifdef IEEE80211_SUPPORT_MESH DB_SHOW_ALL_COMMAND(mesh, db_show_mesh) { const struct ieee80211_mesh_state *ms; if (!have_addr) { db_printf("usage: show mesh \n"); return; } ms = (const struct ieee80211_mesh_state *) addr; _db_show_mesh(ms); } #endif /* IEEE80211_SUPPORT_MESH */ static void _db_show_txampdu(const char *sep, int ix, const struct ieee80211_tx_ampdu *tap) { db_printf("%stxampdu[%d]: %p flags %b %s\n", sep, ix, tap, tap->txa_flags, IEEE80211_AGGR_BITS, ieee80211_wme_acnames[TID_TO_WME_AC(tap->txa_tid)]); db_printf("%s token %u lastsample %d pkts %d avgpps %d qbytes %d qframes %d\n", sep, tap->txa_token, tap->txa_lastsample, tap->txa_pkts, tap->txa_avgpps, tap->txa_qbytes, tap->txa_qframes); db_printf("%s start %u seqpending %u wnd %u attempts %d nextrequest %d\n", sep, tap->txa_start, tap->txa_seqpending, tap->txa_wnd, tap->txa_attempts, tap->txa_nextrequest); /* XXX timer */ } static void _db_show_rxampdu(const char *sep, int ix, const struct ieee80211_rx_ampdu *rap) { int i; db_printf("%srxampdu[%d]: %p flags 0x%x tid %u\n", sep, ix, rap, rap->rxa_flags, ix /*XXX */); db_printf("%s qbytes %d qframes %d seqstart %u start %u wnd %u\n", sep, rap->rxa_qbytes, rap->rxa_qframes, rap->rxa_seqstart, rap->rxa_start, rap->rxa_wnd); db_printf("%s age %d nframes %d\n", sep, rap->rxa_age, rap->rxa_nframes); for (i = 0; i < IEEE80211_AGGR_BAWMAX; i++) if (rap->rxa_m[i] != NULL) db_printf("%s m[%2u:%4u] %p\n", sep, i, IEEE80211_SEQ_ADD(rap->rxa_start, i), rap->rxa_m[i]); } static void _db_show_sta(const struct ieee80211_node *ni) { int i; db_printf("0x%p: mac %s refcnt %d\n", ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); db_printf("\tvap %p wdsvap %p ic %p table %p\n", ni->ni_vap, ni->ni_wdsvap, ni->ni_ic, ni->ni_table); db_printf("\tflags=%b\n", ni->ni_flags, IEEE80211_NODE_BITS); db_printf("\tscangen %u authmode %u ath_flags 0x%x ath_defkeyix %u\n", ni->ni_scangen, ni->ni_authmode, ni->ni_ath_flags, ni->ni_ath_defkeyix); db_printf("\tassocid 0x%x txpower %u vlan %u\n", ni->ni_associd, ni->ni_txpower, ni->ni_vlan); db_printf("\tjointime %d (%lu secs) challenge %p\n", ni->ni_jointime, (unsigned long)(time_uptime - ni->ni_jointime), ni->ni_challenge); db_printf("\ties: data %p len %d\n", ni->ni_ies.data, ni->ni_ies.len); db_printf("\t[wpa_ie %p rsn_ie %p wme_ie %p ath_ie %p\n", ni->ni_ies.wpa_ie, ni->ni_ies.rsn_ie, ni->ni_ies.wme_ie, ni->ni_ies.ath_ie); db_printf("\t htcap_ie %p htinfo_ie %p]\n", ni->ni_ies.htcap_ie, ni->ni_ies.htinfo_ie); if (ni->ni_flags & IEEE80211_NODE_QOS) { for (i = 0; i < WME_NUM_TID; i++) { if (ni->ni_txseqs[i] || ni->ni_rxseqs[i]) db_printf("\t[%u] txseq %u rxseq %u fragno %u\n", i, ni->ni_txseqs[i], ni->ni_rxseqs[i] >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[i] & IEEE80211_SEQ_FRAG_MASK); } } db_printf("\ttxseq %u rxseq %u fragno %u rxfragstamp %u\n", ni->ni_txseqs[IEEE80211_NONQOS_TID], ni->ni_rxseqs[IEEE80211_NONQOS_TID] >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[IEEE80211_NONQOS_TID] & IEEE80211_SEQ_FRAG_MASK, ni->ni_rxfragstamp); db_printf("\trxfrag[0] %p rxfrag[1] %p rxfrag[2] %p\n", ni->ni_rxfrag[0], ni->ni_rxfrag[1], ni->ni_rxfrag[2]); _db_show_key("\tucastkey", 0, &ni->ni_ucastkey); db_printf("\tavgrssi 0x%x (rssi %d) noise %d\n", ni->ni_avgrssi, IEEE80211_RSSI_GET(ni->ni_avgrssi), ni->ni_noise); db_printf("\tintval %u capinfo %b\n", ni->ni_intval, ni->ni_capinfo, IEEE80211_CAPINFO_BITS); db_printf("\tbssid %s", ether_sprintf(ni->ni_bssid)); _db_show_ssid(" essid ", 0, ni->ni_esslen, ni->ni_essid); db_printf("\n"); _db_show_channel("\tchannel", ni->ni_chan); db_printf("\n"); db_printf("\terp %b dtim_period %u dtim_count %u\n", ni->ni_erp, IEEE80211_ERP_BITS, ni->ni_dtim_period, ni->ni_dtim_count); db_printf("\thtcap %b htparam 0x%x htctlchan %u ht2ndchan %u\n", ni->ni_htcap, IEEE80211_HTCAP_BITS, ni->ni_htparam, ni->ni_htctlchan, ni->ni_ht2ndchan); db_printf("\thtopmode 0x%x htstbc 0x%x chw %u\n", ni->ni_htopmode, ni->ni_htstbc, ni->ni_chw); /* XXX ampdu state */ for (i = 0; i < WME_NUM_TID; i++) if (ni->ni_tx_ampdu[i].txa_flags & IEEE80211_AGGR_SETUP) _db_show_txampdu("\t", i, &ni->ni_tx_ampdu[i]); for (i = 0; i < WME_NUM_TID; i++) if (ni->ni_rx_ampdu[i].rxa_flags) _db_show_rxampdu("\t", i, &ni->ni_rx_ampdu[i]); db_printf("\tinact %u inact_reload %u txrate %u\n", ni->ni_inact, ni->ni_inact_reload, ni->ni_txrate); #ifdef IEEE80211_SUPPORT_MESH _db_show_ssid("\tmeshid ", 0, ni->ni_meshidlen, ni->ni_meshid); db_printf(" mlstate %b mllid 0x%x mlpid 0x%x mlrcnt %u mltval %u\n", ni->ni_mlstate, IEEE80211_MESH_MLSTATE_BITS, ni->ni_mllid, ni->ni_mlpid, ni->ni_mlrcnt, ni->ni_mltval); #endif } #ifdef IEEE80211_SUPPORT_TDMA static void _db_show_tdma(const char *sep, const struct ieee80211_tdma_state *ts, int showprocs) { db_printf("%stdma %p:\n", sep, ts); db_printf("%s version %u slot %u bintval %u peer %p\n", sep, ts->tdma_version, ts->tdma_slot, ts->tdma_bintval, ts->tdma_peer); db_printf("%s slotlen %u slotcnt %u", sep, ts->tdma_slotlen, ts->tdma_slotcnt); db_printf(" inuse 0x%x active 0x%x count %d\n", ts->tdma_inuse[0], ts->tdma_active[0], ts->tdma_count); if (showprocs) { DB_PRINTSYM(sep, " tdma_newstate", ts->tdma_newstate); DB_PRINTSYM(sep, " tdma_recv_mgmt", ts->tdma_recv_mgmt); DB_PRINTSYM(sep, " tdma_opdetach", ts->tdma_opdetach); } } #endif /* IEEE80211_SUPPORT_TDMA */ static void _db_show_vap(const struct ieee80211vap *vap, int showmesh, int showprocs) { const struct ieee80211com *ic = vap->iv_ic; int i; db_printf("%p:", vap); db_printf(" bss %p", vap->iv_bss); db_printf(" myaddr %s", ether_sprintf(vap->iv_myaddr)); db_printf("\n"); db_printf("\topmode %s", ieee80211_opmode_name[vap->iv_opmode]); #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) db_printf("(%p)", vap->iv_mesh); #endif db_printf(" state %s", ieee80211_state_name[vap->iv_state]); db_printf(" ifp %p(%s)", vap->iv_ifp, vap->iv_ifp->if_xname); db_printf("\n"); db_printf("\tic %p", vap->iv_ic); db_printf(" media %p", &vap->iv_media); db_printf(" bpf_if %p", vap->iv_rawbpf); db_printf(" mgtsend %p", &vap->iv_mgtsend); #if 0 struct sysctllog *iv_sysctl; /* dynamic sysctl context */ #endif db_printf("\n"); db_printf("\tdebug=%b\n", vap->iv_debug, IEEE80211_MSG_BITS); db_printf("\tflags=%b\n", vap->iv_flags, IEEE80211_F_BITS); db_printf("\tflags_ext=%b\n", vap->iv_flags_ext, IEEE80211_FEXT_BITS); db_printf("\tflags_ht=%b\n", vap->iv_flags_ht, IEEE80211_FHT_BITS); db_printf("\tflags_ven=%b\n", vap->iv_flags_ven, IEEE80211_FVEN_BITS); db_printf("\tcaps=%b\n", vap->iv_caps, IEEE80211_C_BITS); db_printf("\thtcaps=%b\n", vap->iv_htcaps, IEEE80211_C_HTCAP_BITS); _db_show_stats(&vap->iv_stats); db_printf("\tinact_init %d", vap->iv_inact_init); db_printf(" inact_auth %d", vap->iv_inact_auth); db_printf(" inact_run %d", vap->iv_inact_run); db_printf(" inact_probe %d", vap->iv_inact_probe); db_printf("\n"); db_printf("\tdes_nssid %d", vap->iv_des_nssid); if (vap->iv_des_nssid) _db_show_ssid(" des_ssid[%u] ", 0, vap->iv_des_ssid[0].len, vap->iv_des_ssid[0].ssid); db_printf(" des_bssid %s", ether_sprintf(vap->iv_des_bssid)); db_printf("\n"); db_printf("\tdes_mode %d", vap->iv_des_mode); _db_show_channel(" des_chan", vap->iv_des_chan); db_printf("\n"); #if 0 int iv_nicknamelen; /* XXX junk */ uint8_t iv_nickname[IEEE80211_NWID_LEN]; #endif db_printf("\tbgscanidle %u", vap->iv_bgscanidle); db_printf(" bgscanintvl %u", vap->iv_bgscanintvl); db_printf(" scanvalid %u", vap->iv_scanvalid); db_printf("\n"); db_printf("\tscanreq_duration %u", vap->iv_scanreq_duration); db_printf(" scanreq_mindwell %u", vap->iv_scanreq_mindwell); db_printf(" scanreq_maxdwell %u", vap->iv_scanreq_maxdwell); db_printf("\n"); db_printf("\tscanreq_flags 0x%x", vap->iv_scanreq_flags); db_printf(" scanreq_nssid %d", vap->iv_scanreq_nssid); for (i = 0; i < vap->iv_scanreq_nssid; i++) _db_show_ssid(" scanreq_ssid[%u]", i, vap->iv_scanreq_ssid[i].len, vap->iv_scanreq_ssid[i].ssid); db_printf(" roaming %d", vap->iv_roaming); db_printf("\n"); for (i = IEEE80211_MODE_11A; i < IEEE80211_MODE_MAX; i++) if (isset(ic->ic_modecaps, i)) { _db_show_roamparams("\troamparms[%s]", ieee80211_phymode_name[i], &vap->iv_roamparms[i]); db_printf("\n"); } db_printf("\tbmissthreshold %u", vap->iv_bmissthreshold); db_printf(" bmiss_max %u", vap->iv_bmiss_count); db_printf(" bmiss_max %d", vap->iv_bmiss_max); db_printf("\n"); db_printf("\tswbmiss_count %u", vap->iv_swbmiss_count); db_printf(" swbmiss_period %u", vap->iv_swbmiss_period); db_printf(" swbmiss %p", &vap->iv_swbmiss); db_printf("\n"); db_printf("\tampdu_rxmax %d", vap->iv_ampdu_rxmax); db_printf(" ampdu_density %d", vap->iv_ampdu_density); db_printf(" ampdu_limit %d", vap->iv_ampdu_limit); db_printf(" amsdu_limit %d", vap->iv_amsdu_limit); db_printf("\n"); db_printf("\tmax_aid %u", vap->iv_max_aid); db_printf(" aid_bitmap %p", vap->iv_aid_bitmap); db_printf("\n"); db_printf("\tsta_assoc %u", vap->iv_sta_assoc); db_printf(" ps_sta %u", vap->iv_ps_sta); db_printf(" ps_pending %u", vap->iv_ps_pending); db_printf(" tim_len %u", vap->iv_tim_len); db_printf(" tim_bitmap %p", vap->iv_tim_bitmap); db_printf("\n"); db_printf("\tdtim_period %u", vap->iv_dtim_period); db_printf(" dtim_count %u", vap->iv_dtim_count); db_printf(" set_tim %p", vap->iv_set_tim); db_printf(" csa_count %d", vap->iv_csa_count); db_printf("\n"); db_printf("\trtsthreshold %u", vap->iv_rtsthreshold); db_printf(" fragthreshold %u", vap->iv_fragthreshold); db_printf(" inact_timer %d", vap->iv_inact_timer); db_printf("\n"); for (i = IEEE80211_MODE_11A; i < IEEE80211_MODE_MAX; i++) if (isset(ic->ic_modecaps, i)) { _db_show_txparams("\ttxparms[%s]", ieee80211_phymode_name[i], &vap->iv_txparms[i]); db_printf("\n"); } /* application-specified IE's to attach to mgt frames */ _db_show_appie("\tappie_beacon", vap->iv_appie_beacon); _db_show_appie("\tappie_probereq", vap->iv_appie_probereq); _db_show_appie("\tappie_proberesp", vap->iv_appie_proberesp); _db_show_appie("\tappie_assocreq", vap->iv_appie_assocreq); _db_show_appie("\tappie_asscoresp", vap->iv_appie_assocresp); _db_show_appie("\tappie_wpa", vap->iv_appie_wpa); if (vap->iv_wpa_ie != NULL || vap->iv_rsn_ie != NULL) { if (vap->iv_wpa_ie != NULL) db_printf("\twpa_ie %p", vap->iv_wpa_ie); if (vap->iv_rsn_ie != NULL) db_printf("\trsn_ie %p", vap->iv_rsn_ie); db_printf("\n"); } db_printf("\tmax_keyix %u", vap->iv_max_keyix); db_printf(" def_txkey %d", vap->iv_def_txkey); db_printf("\n"); for (i = 0; i < IEEE80211_WEP_NKID; i++) _db_show_key("\tnw_keys[%u]", i, &vap->iv_nw_keys[i]); db_printf("\tauth %p(%s)", vap->iv_auth, vap->iv_auth->ia_name); db_printf(" ec %p", vap->iv_ec); db_printf(" acl %p", vap->iv_acl); db_printf(" as %p", vap->iv_as); db_printf("\n"); #ifdef IEEE80211_SUPPORT_MESH if (showmesh && vap->iv_mesh != NULL) _db_show_mesh(vap->iv_mesh); #endif #ifdef IEEE80211_SUPPORT_TDMA if (vap->iv_tdma != NULL) _db_show_tdma("\t", vap->iv_tdma, showprocs); #endif /* IEEE80211_SUPPORT_TDMA */ if (showprocs) { DB_PRINTSYM("\t", "iv_key_alloc", vap->iv_key_alloc); DB_PRINTSYM("\t", "iv_key_delete", vap->iv_key_delete); DB_PRINTSYM("\t", "iv_key_set", vap->iv_key_set); DB_PRINTSYM("\t", "iv_key_update_begin", vap->iv_key_update_begin); DB_PRINTSYM("\t", "iv_key_update_end", vap->iv_key_update_end); DB_PRINTSYM("\t", "iv_opdetach", vap->iv_opdetach); DB_PRINTSYM("\t", "iv_input", vap->iv_input); DB_PRINTSYM("\t", "iv_recv_mgmt", vap->iv_recv_mgmt); DB_PRINTSYM("\t", "iv_deliver_data", vap->iv_deliver_data); DB_PRINTSYM("\t", "iv_bmiss", vap->iv_bmiss); DB_PRINTSYM("\t", "iv_reset", vap->iv_reset); DB_PRINTSYM("\t", "iv_update_beacon", vap->iv_update_beacon); DB_PRINTSYM("\t", "iv_newstate", vap->iv_newstate); DB_PRINTSYM("\t", "iv_output", vap->iv_output); } } static void _db_show_com(const struct ieee80211com *ic, int showvaps, int showsta, int showmesh, int showprocs) { struct ieee80211vap *vap; db_printf("%p:", ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) db_printf(" %s(%p)", vap->iv_ifp->if_xname, vap); db_printf("\n"); db_printf("\tifp %p(%s)", ic->ic_ifp, ic->ic_ifp->if_xname); + db_printf("\tname %s", ic->ic_name); db_printf(" comlock %p", &ic->ic_comlock); db_printf("\n"); db_printf("\theadroom %d", ic->ic_headroom); db_printf(" phytype %d", ic->ic_phytype); db_printf(" opmode %s", ieee80211_opmode_name[ic->ic_opmode]); db_printf("\n"); db_printf("\tmedia %p", &ic->ic_media); db_printf(" inact %p", &ic->ic_inact); db_printf("\n"); db_printf("\tflags=%b\n", ic->ic_flags, IEEE80211_F_BITS); db_printf("\tflags_ext=%b\n", ic->ic_flags_ext, IEEE80211_FEXT_BITS); db_printf("\tflags_ht=%b\n", ic->ic_flags_ht, IEEE80211_FHT_BITS); db_printf("\tflags_ven=%b\n", ic->ic_flags_ven, IEEE80211_FVEN_BITS); db_printf("\tcaps=%b\n", ic->ic_caps, IEEE80211_C_BITS); db_printf("\tcryptocaps=%b\n", ic->ic_cryptocaps, IEEE80211_CRYPTO_BITS); db_printf("\thtcaps=%b\n", ic->ic_htcaps, IEEE80211_HTCAP_BITS); #if 0 uint8_t ic_modecaps[2]; /* set of mode capabilities */ #endif db_printf("\tcurmode %u", ic->ic_curmode); db_printf(" promisc %u", ic->ic_promisc); db_printf(" allmulti %u", ic->ic_allmulti); db_printf(" nrunning %u", ic->ic_nrunning); db_printf("\n"); db_printf("\tbintval %u", ic->ic_bintval); db_printf(" lintval %u", ic->ic_lintval); db_printf(" holdover %u", ic->ic_holdover); db_printf(" txpowlimit %u", ic->ic_txpowlimit); db_printf("\n"); #if 0 struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX]; #endif /* * Channel state: * * ic_channels is the set of available channels for the device; * it is setup by the driver * ic_nchans is the number of valid entries in ic_channels * ic_chan_avail is a bit vector of these channels used to check * whether a channel is available w/o searching the channel table. * ic_chan_active is a (potentially) constrained subset of * ic_chan_avail that reflects any mode setting or user-specified * limit on the set of channels to use/scan * ic_curchan is the current channel the device is set to; it may * be different from ic_bsschan when we are off-channel scanning * or otherwise doing background work * ic_bsschan is the channel selected for operation; it may * be undefined (IEEE80211_CHAN_ANYC) * ic_prevchan is a cached ``previous channel'' used to optimize * lookups when switching back+forth between two channels * (e.g. for dynamic turbo) */ db_printf("\tnchans %d", ic->ic_nchans); #if 0 struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX]; uint8_t ic_chan_avail[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_active[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_scan[IEEE80211_CHAN_BYTES]; #endif db_printf("\n"); _db_show_channel("\tcurchan", ic->ic_curchan); db_printf("\n"); _db_show_channel("\tbsschan", ic->ic_bsschan); db_printf("\n"); _db_show_channel("\tprevchan", ic->ic_prevchan); db_printf("\n"); db_printf("\tregdomain %p", &ic->ic_regdomain); db_printf("\n"); _db_show_channel("\tcsa_newchan", ic->ic_csa_newchan); db_printf(" csa_count %d", ic->ic_csa_count); db_printf( "dfs %p", &ic->ic_dfs); db_printf("\n"); db_printf("\tscan %p", ic->ic_scan); db_printf(" lastdata %d", ic->ic_lastdata); db_printf(" lastscan %d", ic->ic_lastscan); db_printf("\n"); db_printf("\tmax_keyix %d", ic->ic_max_keyix); db_printf(" hash_key 0x%x", ic->ic_hash_key); db_printf(" wme %p", &ic->ic_wme); if (!showsta) db_printf(" sta %p", &ic->ic_sta); db_printf("\n"); db_printf("\tstageq@%p:\n", &ic->ic_stageq); _db_show_ageq("\t", &ic->ic_stageq); if (showsta) _db_show_node_table("\t", &ic->ic_sta); db_printf("\tprotmode %d", ic->ic_protmode); db_printf(" nonerpsta %u", ic->ic_nonerpsta); db_printf(" longslotsta %u", ic->ic_longslotsta); db_printf(" lastnonerp %d", ic->ic_lastnonerp); db_printf("\n"); db_printf("\tsta_assoc %u", ic->ic_sta_assoc); db_printf(" ht_sta_assoc %u", ic->ic_ht_sta_assoc); db_printf(" ht40_sta_assoc %u", ic->ic_ht40_sta_assoc); db_printf("\n"); db_printf("\tcurhtprotmode 0x%x", ic->ic_curhtprotmode); db_printf(" htprotmode %d", ic->ic_htprotmode); db_printf(" lastnonht %d", ic->ic_lastnonht); db_printf("\n"); db_printf("\tsuperg %p\n", ic->ic_superg); db_printf("\tmontaps %d th %p txchan %p rh %p rxchan %p\n", ic->ic_montaps, ic->ic_th, ic->ic_txchan, ic->ic_rh, ic->ic_rxchan); if (showprocs) { DB_PRINTSYM("\t", "ic_vap_create", ic->ic_vap_create); DB_PRINTSYM("\t", "ic_vap_delete", ic->ic_vap_delete); #if 0 /* operating mode attachment */ ieee80211vap_attach ic_vattach[IEEE80211_OPMODE_MAX]; #endif DB_PRINTSYM("\t", "ic_newassoc", ic->ic_newassoc); DB_PRINTSYM("\t", "ic_getradiocaps", ic->ic_getradiocaps); DB_PRINTSYM("\t", "ic_setregdomain", ic->ic_setregdomain); DB_PRINTSYM("\t", "ic_send_mgmt", ic->ic_send_mgmt); DB_PRINTSYM("\t", "ic_raw_xmit", ic->ic_raw_xmit); DB_PRINTSYM("\t", "ic_updateslot", ic->ic_updateslot); DB_PRINTSYM("\t", "ic_update_mcast", ic->ic_update_mcast); DB_PRINTSYM("\t", "ic_update_promisc", ic->ic_update_promisc); DB_PRINTSYM("\t", "ic_node_alloc", ic->ic_node_alloc); DB_PRINTSYM("\t", "ic_node_free", ic->ic_node_free); DB_PRINTSYM("\t", "ic_node_cleanup", ic->ic_node_cleanup); DB_PRINTSYM("\t", "ic_node_getrssi", ic->ic_node_getrssi); DB_PRINTSYM("\t", "ic_node_getsignal", ic->ic_node_getsignal); DB_PRINTSYM("\t", "ic_node_getmimoinfo", ic->ic_node_getmimoinfo); DB_PRINTSYM("\t", "ic_scan_start", ic->ic_scan_start); DB_PRINTSYM("\t", "ic_scan_end", ic->ic_scan_end); DB_PRINTSYM("\t", "ic_set_channel", ic->ic_set_channel); DB_PRINTSYM("\t", "ic_scan_curchan", ic->ic_scan_curchan); DB_PRINTSYM("\t", "ic_scan_mindwell", ic->ic_scan_mindwell); DB_PRINTSYM("\t", "ic_recv_action", ic->ic_recv_action); DB_PRINTSYM("\t", "ic_send_action", ic->ic_send_action); DB_PRINTSYM("\t", "ic_addba_request", ic->ic_addba_request); DB_PRINTSYM("\t", "ic_addba_response", ic->ic_addba_response); DB_PRINTSYM("\t", "ic_addba_stop", ic->ic_addba_stop); } if (showvaps && !TAILQ_EMPTY(&ic->ic_vaps)) { db_printf("\n"); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) _db_show_vap(vap, showmesh, showprocs); } if (showsta && !TAILQ_EMPTY(&ic->ic_sta.nt_node)) { const struct ieee80211_node_table *nt = &ic->ic_sta; const struct ieee80211_node *ni; TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { db_printf("\n"); _db_show_sta(ni); } } } static void _db_show_node_table(const char *tag, const struct ieee80211_node_table *nt) { int i; db_printf("%s%s@%p:\n", tag, nt->nt_name, nt); db_printf("%s nodelock %p", tag, &nt->nt_nodelock); db_printf(" inact_init %d", nt->nt_inact_init); db_printf(" scanlock %p", &nt->nt_scanlock); db_printf(" scangen %u\n", nt->nt_scangen); db_printf("%s keyixmax %d keyixmap %p\n", tag, nt->nt_keyixmax, nt->nt_keyixmap); for (i = 0; i < nt->nt_keyixmax; i++) { const struct ieee80211_node *ni = nt->nt_keyixmap[i]; if (ni != NULL) db_printf("%s [%3u] %p %s\n", tag, i, ni, ether_sprintf(ni->ni_macaddr)); } } static void _db_show_channel(const char *tag, const struct ieee80211_channel *c) { db_printf("%s ", tag); if (c == NULL) db_printf(""); else if (c == IEEE80211_CHAN_ANYC) db_printf(""); else db_printf("[%u (%u) flags=%b maxreg %d maxpow %d minpow %d state 0x%x extieee %u]", c->ic_freq, c->ic_ieee, c->ic_flags, IEEE80211_CHAN_BITS, c->ic_maxregpower, c->ic_maxpower, c->ic_minpower, c->ic_state, c->ic_extieee); } static void _db_show_ssid(const char *tag, int ix, int len, const uint8_t *ssid) { const uint8_t *p; int i; db_printf(tag, ix); if (len > IEEE80211_NWID_LEN) len = IEEE80211_NWID_LEN; /* determine printable or not */ for (i = 0, p = ssid; i < len; i++, p++) { if (*p < ' ' || *p > 0x7e) break; } if (i == len) { db_printf("\""); for (i = 0, p = ssid; i < len; i++, p++) db_printf("%c", *p); db_printf("\""); } else { db_printf("0x"); for (i = 0, p = ssid; i < len; i++, p++) db_printf("%02x", *p); } } static void _db_show_appie(const char *tag, const struct ieee80211_appie *ie) { const uint8_t *p; int i; if (ie == NULL) return; db_printf("%s [0x", tag); for (i = 0, p = ie->ie_data; i < ie->ie_len; i++, p++) db_printf("%02x", *p); db_printf("]\n"); } static void _db_show_key(const char *tag, int ix, const struct ieee80211_key *wk) { static const uint8_t zerodata[IEEE80211_KEYBUF_SIZE]; const struct ieee80211_cipher *cip = wk->wk_cipher; int keylen = wk->wk_keylen; db_printf(tag, ix); switch (cip->ic_cipher) { case IEEE80211_CIPHER_WEP: /* compatibility */ db_printf(" wepkey %u:%s", wk->wk_keyix, keylen <= 5 ? "40-bit" : keylen <= 13 ? "104-bit" : "128-bit"); break; case IEEE80211_CIPHER_TKIP: if (keylen > 128/8) keylen -= 128/8; /* ignore MIC for now */ db_printf(" TKIP %u:%u-bit", wk->wk_keyix, 8*keylen); break; case IEEE80211_CIPHER_AES_OCB: db_printf(" AES-OCB %u:%u-bit", wk->wk_keyix, 8*keylen); break; case IEEE80211_CIPHER_AES_CCM: db_printf(" AES-CCM %u:%u-bit", wk->wk_keyix, 8*keylen); break; case IEEE80211_CIPHER_CKIP: db_printf(" CKIP %u:%u-bit", wk->wk_keyix, 8*keylen); break; case IEEE80211_CIPHER_NONE: db_printf(" NULL %u:%u-bit", wk->wk_keyix, 8*keylen); break; default: db_printf(" UNKNOWN (0x%x) %u:%u-bit", cip->ic_cipher, wk->wk_keyix, 8*keylen); break; } if (wk->wk_rxkeyix != wk->wk_keyix) db_printf(" rxkeyix %u", wk->wk_rxkeyix); if (memcmp(wk->wk_key, zerodata, keylen) != 0) { int i; db_printf(" <"); for (i = 0; i < keylen; i++) db_printf("%02x", wk->wk_key[i]); db_printf(">"); if (cip->ic_cipher != IEEE80211_CIPHER_WEP && wk->wk_keyrsc[IEEE80211_NONQOS_TID] != 0) db_printf(" rsc %ju", (uintmax_t)wk->wk_keyrsc[IEEE80211_NONQOS_TID]); if (cip->ic_cipher != IEEE80211_CIPHER_WEP && wk->wk_keytsc != 0) db_printf(" tsc %ju", (uintmax_t)wk->wk_keytsc); db_printf(" flags=%b", wk->wk_flags, IEEE80211_KEY_BITS); } db_printf("\n"); } static void printrate(const char *tag, int v) { if (v == IEEE80211_FIXED_RATE_NONE) db_printf(" %s ", tag); else if (v == 11) db_printf(" %s 5.5", tag); else if (v & IEEE80211_RATE_MCS) db_printf(" %s MCS%d", tag, v &~ IEEE80211_RATE_MCS); else db_printf(" %s %d", tag, v/2); } static void _db_show_roamparams(const char *tag, const void *arg, const struct ieee80211_roamparam *rp) { db_printf(tag, arg); if (rp->rssi & 1) db_printf(" rssi %u.5", rp->rssi/2); else db_printf(" rssi %u", rp->rssi/2); printrate("rate", rp->rate); } static void _db_show_txparams(const char *tag, const void *arg, const struct ieee80211_txparam *tp) { db_printf(tag, arg); printrate("ucastrate", tp->ucastrate); printrate("mcastrate", tp->mcastrate); printrate("mgmtrate", tp->mgmtrate); db_printf(" maxretry %d", tp->maxretry); } static void _db_show_ageq(const char *tag, const struct ieee80211_ageq *q) { const struct mbuf *m; db_printf("%s lock %p len %d maxlen %d drops %d head %p tail %p\n", tag, &q->aq_lock, q->aq_len, q->aq_maxlen, q->aq_drops, q->aq_head, q->aq_tail); for (m = q->aq_head; m != NULL; m = m->m_nextpkt) db_printf("%s %p (len %d, %b)\n", tag, m, m->m_len, /* XXX could be either TX or RX but is mostly TX */ m->m_flags, IEEE80211_MBUF_TX_FLAG_BITS); } static void _db_show_stats(const struct ieee80211_stats *is) { } #ifdef IEEE80211_SUPPORT_MESH static void _db_show_mesh(const struct ieee80211_mesh_state *ms) { struct ieee80211_mesh_route *rt; int i; _db_show_ssid(" meshid ", 0, ms->ms_idlen, ms->ms_id); db_printf("nextseq %u ttl %u flags 0x%x\n", ms->ms_seq, ms->ms_ttl, ms->ms_flags); db_printf("routing table:\n"); i = 0; TAILQ_FOREACH(rt, &ms->ms_routes, rt_next) { db_printf("entry %d:\tdest: %6D nexthop: %6D metric: %u", i, rt->rt_dest, ":", rt->rt_nexthop, ":", rt->rt_metric); db_printf("\tlifetime: %u lastseq: %u priv: %p\n", ieee80211_mesh_rt_update(rt, 0), rt->rt_lastmseq, rt->rt_priv); i++; } } #endif /* IEEE80211_SUPPORT_MESH */ #endif /* DDB */ Index: head/sys/net80211/ieee80211_dfs.c =================================================================== --- head/sys/net80211/ieee80211_dfs.c (revision 283528) +++ head/sys/net80211/ieee80211_dfs.c (revision 283529) @@ -1,439 +1,439 @@ /*- * Copyright (c) 2007-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #ifdef __FreeBSD__ __FBSDID("$FreeBSD$"); #endif /* * IEEE 802.11 DFS/Radar support. */ #include "opt_inet.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static MALLOC_DEFINE(M_80211_DFS, "80211dfs", "802.11 DFS state"); static int ieee80211_nol_timeout = 30*60; /* 30 minutes */ SYSCTL_INT(_net_wlan, OID_AUTO, nol_timeout, CTLFLAG_RW, &ieee80211_nol_timeout, 0, "NOL timeout (secs)"); #define NOL_TIMEOUT msecs_to_ticks(ieee80211_nol_timeout*1000) static int ieee80211_cac_timeout = 60; /* 60 seconds */ SYSCTL_INT(_net_wlan, OID_AUTO, cac_timeout, CTLFLAG_RW, &ieee80211_cac_timeout, 0, "CAC timeout (secs)"); #define CAC_TIMEOUT msecs_to_ticks(ieee80211_cac_timeout*1000) /* DFS* In order to facilitate debugging, a couple of operating * modes aside from the default are needed. * * 0 - default CAC/NOL behaviour - ie, start CAC, place * channel on NOL list. * 1 - send CAC, but don't change channel or add the channel * to the NOL list. * 2 - just match on radar, don't send CAC or place channel in * the NOL list. */ static int ieee80211_dfs_debug = DFS_DBG_NONE; /* * This option must not be included in the default kernel * as it allows users to plainly disable CAC/NOL handling. */ #ifdef IEEE80211_DFS_DEBUG SYSCTL_INT(_net_wlan, OID_AUTO, dfs_debug, CTLFLAG_RW, &ieee80211_dfs_debug, 0, "DFS debug behaviour"); #endif static int null_set_quiet(struct ieee80211_node *ni, u_int8_t *quiet_elm) { return ENOSYS; } void ieee80211_dfs_attach(struct ieee80211com *ic) { struct ieee80211_dfs_state *dfs = &ic->ic_dfs; callout_init_mtx(&dfs->nol_timer, IEEE80211_LOCK_OBJ(ic), 0); callout_init_mtx(&dfs->cac_timer, IEEE80211_LOCK_OBJ(ic), 0); ic->ic_set_quiet = null_set_quiet; } void ieee80211_dfs_detach(struct ieee80211com *ic) { /* NB: we assume no locking is needed */ ieee80211_dfs_reset(ic); } void ieee80211_dfs_reset(struct ieee80211com *ic) { struct ieee80211_dfs_state *dfs = &ic->ic_dfs; int i; /* NB: we assume no locking is needed */ /* NB: cac_timer should be cleared by the state machine */ callout_drain(&dfs->nol_timer); for (i = 0; i < ic->ic_nchans; i++) ic->ic_channels[i].ic_state = 0; dfs->lastchan = NULL; } static void cac_timeout(void *arg) { struct ieee80211vap *vap = arg; struct ieee80211com *ic = vap->iv_ic; struct ieee80211_dfs_state *dfs = &ic->ic_dfs; int i; IEEE80211_LOCK_ASSERT(ic); if (vap->iv_state != IEEE80211_S_CAC) /* NB: just in case */ return; /* * When radar is detected during a CAC we are woken * up prematurely to switch to a new channel. * Check the channel to decide how to act. */ if (IEEE80211_IS_CHAN_RADAR(ic->ic_curchan)) { ieee80211_notify_cac(ic, ic->ic_curchan, IEEE80211_NOTIFY_CAC_RADAR); if_printf(vap->iv_ifp, "CAC timer on channel %u (%u MHz) stopped due to radar\n", ic->ic_curchan->ic_ieee, ic->ic_curchan->ic_freq); /* XXX clobbers any existing desired channel */ /* NB: dfs->newchan may be NULL, that's ok */ vap->iv_des_chan = dfs->newchan; /* XXX recursive lock need ieee80211_new_state_locked */ ieee80211_new_state(vap, IEEE80211_S_SCAN, 0); } else { if_printf(vap->iv_ifp, "CAC timer on channel %u (%u MHz) expired; " "no radar detected\n", ic->ic_curchan->ic_ieee, ic->ic_curchan->ic_freq); /* * Mark all channels with the current frequency * as having completed CAC; this keeps us from * doing it again until we change channels. */ for (i = 0; i < ic->ic_nchans; i++) { struct ieee80211_channel *c = &ic->ic_channels[i]; if (c->ic_freq == ic->ic_curchan->ic_freq) c->ic_state |= IEEE80211_CHANSTATE_CACDONE; } ieee80211_notify_cac(ic, ic->ic_curchan, IEEE80211_NOTIFY_CAC_EXPIRE); ieee80211_cac_completeswitch(vap); } } /* * Initiate the CAC timer. The driver is responsible * for setting up the hardware to scan for radar on the * channnel, we just handle timing things out. */ void ieee80211_dfs_cac_start(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_dfs_state *dfs = &ic->ic_dfs; IEEE80211_LOCK_ASSERT(ic); callout_reset(&dfs->cac_timer, CAC_TIMEOUT, cac_timeout, vap); if_printf(vap->iv_ifp, "start %d second CAC timer on channel %u (%u MHz)\n", ticks_to_secs(CAC_TIMEOUT), ic->ic_curchan->ic_ieee, ic->ic_curchan->ic_freq); ieee80211_notify_cac(ic, ic->ic_curchan, IEEE80211_NOTIFY_CAC_START); } /* * Clear the CAC timer. */ void ieee80211_dfs_cac_stop(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_dfs_state *dfs = &ic->ic_dfs; IEEE80211_LOCK_ASSERT(ic); /* NB: racey but not important */ if (callout_pending(&dfs->cac_timer)) { if_printf(vap->iv_ifp, "stop CAC timer on channel %u (%u MHz)\n", ic->ic_curchan->ic_ieee, ic->ic_curchan->ic_freq); ieee80211_notify_cac(ic, ic->ic_curchan, IEEE80211_NOTIFY_CAC_STOP); } callout_stop(&dfs->cac_timer); } void ieee80211_dfs_cac_clear(struct ieee80211com *ic, const struct ieee80211_channel *chan) { int i; for (i = 0; i < ic->ic_nchans; i++) { struct ieee80211_channel *c = &ic->ic_channels[i]; if (c->ic_freq == chan->ic_freq) c->ic_state &= ~IEEE80211_CHANSTATE_CACDONE; } } static void dfs_timeout(void *arg) { struct ieee80211com *ic = arg; struct ieee80211_dfs_state *dfs = &ic->ic_dfs; struct ieee80211_channel *c; int i, oldest, now; IEEE80211_LOCK_ASSERT(ic); now = oldest = ticks; for (i = 0; i < ic->ic_nchans; i++) { c = &ic->ic_channels[i]; if (IEEE80211_IS_CHAN_RADAR(c)) { if (time_after_eq(now, dfs->nol_event[i]+NOL_TIMEOUT)) { c->ic_state &= ~IEEE80211_CHANSTATE_RADAR; if (c->ic_state & IEEE80211_CHANSTATE_NORADAR) { /* * NB: do this here so we get only one * msg instead of one for every channel * table entry. */ - if_printf(ic->ic_ifp, "radar on channel" - " %u (%u MHz) cleared after timeout\n", + ic_printf(ic, "radar on channel %u " + "(%u MHz) cleared after timeout\n", c->ic_ieee, c->ic_freq); /* notify user space */ c->ic_state &= ~IEEE80211_CHANSTATE_NORADAR; ieee80211_notify_radar(ic, c); } } else if (dfs->nol_event[i] < oldest) oldest = dfs->nol_event[i]; } } if (oldest != now) { /* arrange to process next channel up for a status change */ callout_schedule(&dfs->nol_timer, oldest + NOL_TIMEOUT - now); } } static void -announce_radar(struct ifnet *ifp, const struct ieee80211_channel *curchan, +announce_radar(struct ieee80211com *ic, const struct ieee80211_channel *curchan, const struct ieee80211_channel *newchan) { if (newchan == NULL) - if_printf(ifp, "radar detected on channel %u (%u MHz)\n", + ic_printf(ic, "radar detected on channel %u (%u MHz)\n", curchan->ic_ieee, curchan->ic_freq); else - if_printf(ifp, "radar detected on channel %u (%u MHz), " + ic_printf(ic, "radar detected on channel %u (%u MHz), " "moving to channel %u (%u MHz)\n", curchan->ic_ieee, curchan->ic_freq, newchan->ic_ieee, newchan->ic_freq); } /* * Handle a radar detection event on a channel. The channel is * added to the NOL list and we record the time of the event. * Entries are aged out after NOL_TIMEOUT. If radar was * detected while doing CAC we force a state/channel change. * Otherwise radar triggers a channel switch using the CSA * mechanism (when the channel is the bss channel). */ void ieee80211_dfs_notify_radar(struct ieee80211com *ic, struct ieee80211_channel *chan) { struct ieee80211_dfs_state *dfs = &ic->ic_dfs; int i, now; IEEE80211_LOCK_ASSERT(ic); /* * If doing DFS debugging (mode 2), don't bother * running the rest of this function. * * Simply announce the presence of the radar and continue * along merrily. */ if (ieee80211_dfs_debug == DFS_DBG_NOCSANOL) { - announce_radar(ic->ic_ifp, chan, chan); + announce_radar(ic, chan, chan); ieee80211_notify_radar(ic, chan); return; } /* * Don't mark the channel and don't put it into NOL * if we're doing DFS debugging. */ if (ieee80211_dfs_debug == DFS_DBG_NONE) { /* * Mark all entries with this frequency. Notify user * space and arrange for notification when the radar * indication is cleared. Then kick the NOL processing * thread if not already running. */ now = ticks; for (i = 0; i < ic->ic_nchans; i++) { struct ieee80211_channel *c = &ic->ic_channels[i]; if (c->ic_freq == chan->ic_freq) { c->ic_state &= ~IEEE80211_CHANSTATE_CACDONE; c->ic_state |= IEEE80211_CHANSTATE_RADAR; dfs->nol_event[i] = now; } } ieee80211_notify_radar(ic, chan); chan->ic_state |= IEEE80211_CHANSTATE_NORADAR; if (!callout_pending(&dfs->nol_timer)) callout_reset(&dfs->nol_timer, NOL_TIMEOUT, dfs_timeout, ic); } /* * If radar is detected on the bss channel while * doing CAC; force a state change by scheduling the * callout to be dispatched asap. Otherwise, if this * event is for the bss channel then we must quiet * traffic and schedule a channel switch. * * Note this allows us to receive notification about * channels other than the bss channel; not sure * that can/will happen but it's simple to support. */ if (chan == ic->ic_bsschan) { /* XXX need a way to defer to user app */ /* * Don't flip over to a new channel if * we are currently doing DFS debugging. */ if (ieee80211_dfs_debug == DFS_DBG_NONE) dfs->newchan = ieee80211_dfs_pickchannel(ic); else dfs->newchan = chan; - announce_radar(ic->ic_ifp, chan, dfs->newchan); + announce_radar(ic, chan, dfs->newchan); if (callout_pending(&dfs->cac_timer)) callout_schedule(&dfs->cac_timer, 0); else if (dfs->newchan != NULL) { /* XXX mode 1, switch count 2 */ /* XXX calculate switch count based on max switch time and beacon interval? */ ieee80211_csa_startswitch(ic, dfs->newchan, 1, 2); } else { /* * Spec says to stop all transmissions and * wait on the current channel for an entry * on the NOL to expire. */ /*XXX*/ - if_printf(ic->ic_ifp, "%s: No free channels; waiting for entry " + ic_printf(ic, "%s: No free channels; waiting for entry " "on NOL to expire\n", __func__); } } else { /* * Issue rate-limited console msgs. */ if (dfs->lastchan != chan) { dfs->lastchan = chan; dfs->cureps = 0; - announce_radar(ic->ic_ifp, chan, NULL); + announce_radar(ic, chan, NULL); } else if (ppsratecheck(&dfs->lastevent, &dfs->cureps, 1)) { - announce_radar(ic->ic_ifp, chan, NULL); + announce_radar(ic, chan, NULL); } } } struct ieee80211_channel * ieee80211_dfs_pickchannel(struct ieee80211com *ic) { struct ieee80211_channel *c; int i, flags; uint16_t v; /* * Consult the scan cache first. */ flags = ic->ic_curchan->ic_flags & IEEE80211_CHAN_ALL; /* * XXX if curchan is HT this will never find a channel * XXX 'cuz we scan only legacy channels */ c = ieee80211_scan_pickchannel(ic, flags); if (c != NULL) return c; /* * No channel found in scan cache; select a compatible * one at random (skipping channels where radar has * been detected). */ get_random_bytes(&v, sizeof(v)); v %= ic->ic_nchans; for (i = v; i < ic->ic_nchans; i++) { c = &ic->ic_channels[i]; if (!IEEE80211_IS_CHAN_RADAR(c) && (c->ic_flags & flags) == flags) return c; } for (i = 0; i < v; i++) { c = &ic->ic_channels[i]; if (!IEEE80211_IS_CHAN_RADAR(c) && (c->ic_flags & flags) == flags) return c; } - if_printf(ic->ic_ifp, "HELP, no channel located to switch to!\n"); + ic_printf(ic, "HELP, no channel located to switch to!\n"); return NULL; } Index: head/sys/net80211/ieee80211_freebsd.c =================================================================== --- head/sys/net80211/ieee80211_freebsd.c (revision 283528) +++ head/sys/net80211/ieee80211_freebsd.c (revision 283529) @@ -1,915 +1,914 @@ /*- * Copyright (c) 2003-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 support (FreeBSD-specific code) */ #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include SYSCTL_NODE(_net, OID_AUTO, wlan, CTLFLAG_RD, 0, "IEEE 80211 parameters"); #ifdef IEEE80211_DEBUG int ieee80211_debug = 0; SYSCTL_INT(_net_wlan, OID_AUTO, debug, CTLFLAG_RW, &ieee80211_debug, 0, "debugging printfs"); #endif static MALLOC_DEFINE(M_80211_COM, "80211com", "802.11 com state"); #if __FreeBSD_version >= 1000020 static const char wlanname[] = "wlan"; static struct if_clone *wlan_cloner; #endif /* * Allocate/free com structure in conjunction with ifnet; * these routines are registered with if_register_com_alloc * below and are called automatically by the ifnet code * when the ifnet of the parent device is created. */ static void * wlan_alloc(u_char type, struct ifnet *ifp) { struct ieee80211com *ic; ic = malloc(sizeof(struct ieee80211com), M_80211_COM, M_WAITOK|M_ZERO); ic->ic_ifp = ifp; return (ic); } static void wlan_free(void *ic, u_char type) { free(ic, M_80211_COM); } static int wlan_clone_create(struct if_clone *ifc, int unit, caddr_t params) { struct ieee80211_clone_params cp; struct ieee80211vap *vap; struct ieee80211com *ic; struct ifnet *ifp; int error; error = copyin(params, &cp, sizeof(cp)); if (error) return error; ifp = ifunit(cp.icp_parent); if (ifp == NULL) return ENXIO; /* XXX move printfs to DIAGNOSTIC before release */ if (ifp->if_type != IFT_IEEE80211) { if_printf(ifp, "%s: reject, not an 802.11 device\n", __func__); return ENXIO; } if (cp.icp_opmode >= IEEE80211_OPMODE_MAX) { if_printf(ifp, "%s: invalid opmode %d\n", __func__, cp.icp_opmode); return EINVAL; } ic = ifp->if_l2com; if ((ic->ic_caps & ieee80211_opcap[cp.icp_opmode]) == 0) { if_printf(ifp, "%s mode not supported\n", ieee80211_opmode_name[cp.icp_opmode]); return EOPNOTSUPP; } if ((cp.icp_flags & IEEE80211_CLONE_TDMA) && #ifdef IEEE80211_SUPPORT_TDMA (ic->ic_caps & IEEE80211_C_TDMA) == 0 #else (1) #endif ) { if_printf(ifp, "TDMA not supported\n"); return EOPNOTSUPP; } #if __FreeBSD_version >= 1000020 vap = ic->ic_vap_create(ic, wlanname, unit, cp.icp_opmode, cp.icp_flags, cp.icp_bssid, cp.icp_flags & IEEE80211_CLONE_MACADDR ? cp.icp_macaddr : (const uint8_t *)IF_LLADDR(ifp)); #else vap = ic->ic_vap_create(ic, ifc->ifc_name, unit, cp.icp_opmode, cp.icp_flags, cp.icp_bssid, cp.icp_flags & IEEE80211_CLONE_MACADDR ? cp.icp_macaddr : (const uint8_t *)IF_LLADDR(ifp)); #endif return (vap == NULL ? EIO : 0); } static void wlan_clone_destroy(struct ifnet *ifp) { struct ieee80211vap *vap = ifp->if_softc; struct ieee80211com *ic = vap->iv_ic; ic->ic_vap_delete(vap); } #if __FreeBSD_version < 1000020 IFC_SIMPLE_DECLARE(wlan, 0); #endif void ieee80211_vap_destroy(struct ieee80211vap *vap) { CURVNET_SET(vap->iv_ifp->if_vnet); #if __FreeBSD_version >= 1000020 if_clone_destroyif(wlan_cloner, vap->iv_ifp); #else if_clone_destroyif(&wlan_cloner, vap->iv_ifp); #endif CURVNET_RESTORE(); } int ieee80211_sysctl_msecs_ticks(SYSCTL_HANDLER_ARGS) { int msecs = ticks_to_msecs(*(int *)arg1); int error, t; error = sysctl_handle_int(oidp, &msecs, 0, req); if (error || !req->newptr) return error; t = msecs_to_ticks(msecs); *(int *)arg1 = (t < 1) ? 1 : t; return 0; } static int ieee80211_sysctl_inact(SYSCTL_HANDLER_ARGS) { int inact = (*(int *)arg1) * IEEE80211_INACT_WAIT; int error; error = sysctl_handle_int(oidp, &inact, 0, req); if (error || !req->newptr) return error; *(int *)arg1 = inact / IEEE80211_INACT_WAIT; return 0; } static int ieee80211_sysctl_parent(SYSCTL_HANDLER_ARGS) { struct ieee80211com *ic = arg1; - const char *name = ic->ic_ifp->if_xname; - return SYSCTL_OUT_STR(req, name); + return SYSCTL_OUT_STR(req, ic->ic_name); } static int ieee80211_sysctl_radar(SYSCTL_HANDLER_ARGS) { struct ieee80211com *ic = arg1; int t = 0, error; error = sysctl_handle_int(oidp, &t, 0, req); if (error || !req->newptr) return error; IEEE80211_LOCK(ic); ieee80211_dfs_notify_radar(ic, ic->ic_curchan); IEEE80211_UNLOCK(ic); return 0; } void ieee80211_sysctl_attach(struct ieee80211com *ic) { } void ieee80211_sysctl_detach(struct ieee80211com *ic) { } void ieee80211_sysctl_vattach(struct ieee80211vap *vap) { struct ifnet *ifp = vap->iv_ifp; struct sysctl_ctx_list *ctx; struct sysctl_oid *oid; char num[14]; /* sufficient for 32 bits */ ctx = (struct sysctl_ctx_list *) malloc(sizeof(struct sysctl_ctx_list), M_DEVBUF, M_NOWAIT | M_ZERO); if (ctx == NULL) { if_printf(ifp, "%s: cannot allocate sysctl context!\n", __func__); return; } sysctl_ctx_init(ctx); snprintf(num, sizeof(num), "%u", ifp->if_dunit); oid = SYSCTL_ADD_NODE(ctx, &SYSCTL_NODE_CHILDREN(_net, wlan), OID_AUTO, num, CTLFLAG_RD, NULL, ""); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "%parent", CTLTYPE_STRING | CTLFLAG_RD, vap->iv_ic, 0, ieee80211_sysctl_parent, "A", "parent device"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "driver_caps", CTLFLAG_RW, &vap->iv_caps, 0, "driver capabilities"); #ifdef IEEE80211_DEBUG vap->iv_debug = ieee80211_debug; SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "debug", CTLFLAG_RW, &vap->iv_debug, 0, "control debugging printfs"); #endif SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "bmiss_max", CTLFLAG_RW, &vap->iv_bmiss_max, 0, "consecutive beacon misses before scanning"); /* XXX inherit from tunables */ SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "inact_run", CTLTYPE_INT | CTLFLAG_RW, &vap->iv_inact_run, 0, ieee80211_sysctl_inact, "I", "station inactivity timeout (sec)"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "inact_probe", CTLTYPE_INT | CTLFLAG_RW, &vap->iv_inact_probe, 0, ieee80211_sysctl_inact, "I", "station inactivity probe timeout (sec)"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "inact_auth", CTLTYPE_INT | CTLFLAG_RW, &vap->iv_inact_auth, 0, ieee80211_sysctl_inact, "I", "station authentication timeout (sec)"); SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "inact_init", CTLTYPE_INT | CTLFLAG_RW, &vap->iv_inact_init, 0, ieee80211_sysctl_inact, "I", "station initial state timeout (sec)"); if (vap->iv_htcaps & IEEE80211_HTC_HT) { SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "ampdu_mintraffic_bk", CTLFLAG_RW, &vap->iv_ampdu_mintraffic[WME_AC_BK], 0, "BK traffic tx aggr threshold (pps)"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "ampdu_mintraffic_be", CTLFLAG_RW, &vap->iv_ampdu_mintraffic[WME_AC_BE], 0, "BE traffic tx aggr threshold (pps)"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "ampdu_mintraffic_vo", CTLFLAG_RW, &vap->iv_ampdu_mintraffic[WME_AC_VO], 0, "VO traffic tx aggr threshold (pps)"); SYSCTL_ADD_UINT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "ampdu_mintraffic_vi", CTLFLAG_RW, &vap->iv_ampdu_mintraffic[WME_AC_VI], 0, "VI traffic tx aggr threshold (pps)"); } if (vap->iv_caps & IEEE80211_C_DFS) { SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, "radar", CTLTYPE_INT | CTLFLAG_RW, vap->iv_ic, 0, ieee80211_sysctl_radar, "I", "simulate radar event"); } vap->iv_sysctl = ctx; vap->iv_oid = oid; } void ieee80211_sysctl_vdetach(struct ieee80211vap *vap) { if (vap->iv_sysctl != NULL) { sysctl_ctx_free(vap->iv_sysctl); free(vap->iv_sysctl, M_DEVBUF); vap->iv_sysctl = NULL; } } int ieee80211_node_dectestref(struct ieee80211_node *ni) { /* XXX need equivalent of atomic_dec_and_test */ atomic_subtract_int(&ni->ni_refcnt, 1); return atomic_cmpset_int(&ni->ni_refcnt, 0, 1); } void ieee80211_drain_ifq(struct ifqueue *ifq) { struct ieee80211_node *ni; struct mbuf *m; for (;;) { IF_DEQUEUE(ifq, m); if (m == NULL) break; ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; KASSERT(ni != NULL, ("frame w/o node")); ieee80211_free_node(ni); m->m_pkthdr.rcvif = NULL; m_freem(m); } } void ieee80211_flush_ifq(struct ifqueue *ifq, struct ieee80211vap *vap) { struct ieee80211_node *ni; struct mbuf *m, **mprev; IF_LOCK(ifq); mprev = &ifq->ifq_head; while ((m = *mprev) != NULL) { ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; if (ni != NULL && ni->ni_vap == vap) { *mprev = m->m_nextpkt; /* remove from list */ ifq->ifq_len--; m_freem(m); ieee80211_free_node(ni); /* reclaim ref */ } else mprev = &m->m_nextpkt; } /* recalculate tail ptr */ m = ifq->ifq_head; for (; m != NULL && m->m_nextpkt != NULL; m = m->m_nextpkt) ; ifq->ifq_tail = m; IF_UNLOCK(ifq); } /* * As above, for mbufs allocated with m_gethdr/MGETHDR * or initialized by M_COPY_PKTHDR. */ #define MC_ALIGN(m, len) \ do { \ (m)->m_data += (MCLBYTES - (len)) &~ (sizeof(long) - 1); \ } while (/* CONSTCOND */ 0) /* * Allocate and setup a management frame of the specified * size. We return the mbuf and a pointer to the start * of the contiguous data area that's been reserved based * on the packet length. The data area is forced to 32-bit * alignment and the buffer length to a multiple of 4 bytes. * This is done mainly so beacon frames (that require this) * can use this interface too. */ struct mbuf * ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen) { struct mbuf *m; u_int len; /* * NB: we know the mbuf routines will align the data area * so we don't need to do anything special. */ len = roundup2(headroom + pktlen, 4); KASSERT(len <= MCLBYTES, ("802.11 mgt frame too large: %u", len)); if (len < MINCLSIZE) { m = m_gethdr(M_NOWAIT, MT_DATA); /* * Align the data in case additional headers are added. * This should only happen when a WEP header is added * which only happens for shared key authentication mgt * frames which all fit in MHLEN. */ if (m != NULL) M_ALIGN(m, len); } else { m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); if (m != NULL) MC_ALIGN(m, len); } if (m != NULL) { m->m_data += headroom; *frm = m->m_data; } return m; } #ifndef __NO_STRICT_ALIGNMENT /* * Re-align the payload in the mbuf. This is mainly used (right now) * to handle IP header alignment requirements on certain architectures. */ struct mbuf * ieee80211_realign(struct ieee80211vap *vap, struct mbuf *m, size_t align) { int pktlen, space; struct mbuf *n; pktlen = m->m_pkthdr.len; space = pktlen + align; if (space < MINCLSIZE) n = m_gethdr(M_NOWAIT, MT_DATA); else { n = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, space <= MCLBYTES ? MCLBYTES : #if MJUMPAGESIZE != MCLBYTES space <= MJUMPAGESIZE ? MJUMPAGESIZE : #endif space <= MJUM9BYTES ? MJUM9BYTES : MJUM16BYTES); } if (__predict_true(n != NULL)) { m_move_pkthdr(n, m); n->m_data = (caddr_t)(ALIGN(n->m_data + align) - align); m_copydata(m, 0, pktlen, mtod(n, caddr_t)); n->m_len = pktlen; } else { IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, mtod(m, const struct ieee80211_frame *), NULL, "%s", "no mbuf to realign"); vap->iv_stats.is_rx_badalign++; } m_freem(m); return n; } #endif /* !__NO_STRICT_ALIGNMENT */ int ieee80211_add_callback(struct mbuf *m, void (*func)(struct ieee80211_node *, void *, int), void *arg) { struct m_tag *mtag; struct ieee80211_cb *cb; mtag = m_tag_alloc(MTAG_ABI_NET80211, NET80211_TAG_CALLBACK, sizeof(struct ieee80211_cb), M_NOWAIT); if (mtag == NULL) return 0; cb = (struct ieee80211_cb *)(mtag+1); cb->func = func; cb->arg = arg; m_tag_prepend(m, mtag); m->m_flags |= M_TXCB; return 1; } void ieee80211_process_callback(struct ieee80211_node *ni, struct mbuf *m, int status) { struct m_tag *mtag; mtag = m_tag_locate(m, MTAG_ABI_NET80211, NET80211_TAG_CALLBACK, NULL); if (mtag != NULL) { struct ieee80211_cb *cb = (struct ieee80211_cb *)(mtag+1); cb->func(ni, cb->arg, status); } } /* * Transmit a frame to the parent interface. * * TODO: if the transmission fails, make sure the parent node is freed * (the callers will first need modifying.) */ int ieee80211_parent_xmitpkt(struct ieee80211com *ic, struct mbuf *m) { struct ifnet *parent = ic->ic_ifp; /* * Assert the IC TX lock is held - this enforces the * processing -> queuing order is maintained */ IEEE80211_TX_LOCK_ASSERT(ic); return (parent->if_transmit(parent, m)); } /* * Transmit a frame to the VAP interface. */ int ieee80211_vap_xmitpkt(struct ieee80211vap *vap, struct mbuf *m) { struct ifnet *ifp = vap->iv_ifp; /* * When transmitting via the VAP, we shouldn't hold * any IC TX lock as the VAP TX path will acquire it. */ IEEE80211_TX_UNLOCK_ASSERT(vap->iv_ic); return (ifp->if_transmit(ifp, m)); } #include void get_random_bytes(void *p, size_t n) { uint8_t *dp = p; while (n > 0) { uint32_t v = arc4random(); size_t nb = n > sizeof(uint32_t) ? sizeof(uint32_t) : n; bcopy(&v, dp, n > sizeof(uint32_t) ? sizeof(uint32_t) : n); dp += sizeof(uint32_t), n -= nb; } } /* * Helper function for events that pass just a single mac address. */ static void notify_macaddr(struct ifnet *ifp, int op, const uint8_t mac[IEEE80211_ADDR_LEN]) { struct ieee80211_join_event iev; CURVNET_SET(ifp->if_vnet); memset(&iev, 0, sizeof(iev)); IEEE80211_ADDR_COPY(iev.iev_addr, mac); rt_ieee80211msg(ifp, op, &iev, sizeof(iev)); CURVNET_RESTORE(); } void ieee80211_notify_node_join(struct ieee80211_node *ni, int newassoc) { struct ieee80211vap *vap = ni->ni_vap; struct ifnet *ifp = vap->iv_ifp; CURVNET_SET_QUIET(ifp->if_vnet); IEEE80211_NOTE(vap, IEEE80211_MSG_NODE, ni, "%snode join", (ni == vap->iv_bss) ? "bss " : ""); if (ni == vap->iv_bss) { notify_macaddr(ifp, newassoc ? RTM_IEEE80211_ASSOC : RTM_IEEE80211_REASSOC, ni->ni_bssid); if_link_state_change(ifp, LINK_STATE_UP); } else { notify_macaddr(ifp, newassoc ? RTM_IEEE80211_JOIN : RTM_IEEE80211_REJOIN, ni->ni_macaddr); } CURVNET_RESTORE(); } void ieee80211_notify_node_leave(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ifnet *ifp = vap->iv_ifp; CURVNET_SET_QUIET(ifp->if_vnet); IEEE80211_NOTE(vap, IEEE80211_MSG_NODE, ni, "%snode leave", (ni == vap->iv_bss) ? "bss " : ""); if (ni == vap->iv_bss) { rt_ieee80211msg(ifp, RTM_IEEE80211_DISASSOC, NULL, 0); if_link_state_change(ifp, LINK_STATE_DOWN); } else { /* fire off wireless event station leaving */ notify_macaddr(ifp, RTM_IEEE80211_LEAVE, ni->ni_macaddr); } CURVNET_RESTORE(); } void ieee80211_notify_scan_done(struct ieee80211vap *vap) { struct ifnet *ifp = vap->iv_ifp; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s\n", "notify scan done"); /* dispatch wireless event indicating scan completed */ CURVNET_SET(ifp->if_vnet); rt_ieee80211msg(ifp, RTM_IEEE80211_SCAN, NULL, 0); CURVNET_RESTORE(); } void ieee80211_notify_replay_failure(struct ieee80211vap *vap, const struct ieee80211_frame *wh, const struct ieee80211_key *k, u_int64_t rsc, int tid) { struct ifnet *ifp = vap->iv_ifp; IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_CRYPTO, wh->i_addr2, "%s replay detected tid %d ", k->wk_cipher->ic_name, tid, (intmax_t) rsc, (intmax_t) k->wk_keyrsc[tid], k->wk_keyix, k->wk_rxkeyix); if (ifp != NULL) { /* NB: for cipher test modules */ struct ieee80211_replay_event iev; IEEE80211_ADDR_COPY(iev.iev_dst, wh->i_addr1); IEEE80211_ADDR_COPY(iev.iev_src, wh->i_addr2); iev.iev_cipher = k->wk_cipher->ic_cipher; if (k->wk_rxkeyix != IEEE80211_KEYIX_NONE) iev.iev_keyix = k->wk_rxkeyix; else iev.iev_keyix = k->wk_keyix; iev.iev_keyrsc = k->wk_keyrsc[tid]; iev.iev_rsc = rsc; CURVNET_SET(ifp->if_vnet); rt_ieee80211msg(ifp, RTM_IEEE80211_REPLAY, &iev, sizeof(iev)); CURVNET_RESTORE(); } } void ieee80211_notify_michael_failure(struct ieee80211vap *vap, const struct ieee80211_frame *wh, u_int keyix) { struct ifnet *ifp = vap->iv_ifp; IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_CRYPTO, wh->i_addr2, "michael MIC verification failed ", keyix); vap->iv_stats.is_rx_tkipmic++; if (ifp != NULL) { /* NB: for cipher test modules */ struct ieee80211_michael_event iev; IEEE80211_ADDR_COPY(iev.iev_dst, wh->i_addr1); IEEE80211_ADDR_COPY(iev.iev_src, wh->i_addr2); iev.iev_cipher = IEEE80211_CIPHER_TKIP; iev.iev_keyix = keyix; CURVNET_SET(ifp->if_vnet); rt_ieee80211msg(ifp, RTM_IEEE80211_MICHAEL, &iev, sizeof(iev)); CURVNET_RESTORE(); } } void ieee80211_notify_wds_discover(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ifnet *ifp = vap->iv_ifp; notify_macaddr(ifp, RTM_IEEE80211_WDS, ni->ni_macaddr); } void ieee80211_notify_csa(struct ieee80211com *ic, const struct ieee80211_channel *c, int mode, int count) { struct ifnet *ifp = ic->ic_ifp; struct ieee80211_csa_event iev; memset(&iev, 0, sizeof(iev)); iev.iev_flags = c->ic_flags; iev.iev_freq = c->ic_freq; iev.iev_ieee = c->ic_ieee; iev.iev_mode = mode; iev.iev_count = count; CURVNET_SET(ifp->if_vnet); rt_ieee80211msg(ifp, RTM_IEEE80211_CSA, &iev, sizeof(iev)); CURVNET_RESTORE(); } void ieee80211_notify_radar(struct ieee80211com *ic, const struct ieee80211_channel *c) { struct ifnet *ifp = ic->ic_ifp; struct ieee80211_radar_event iev; memset(&iev, 0, sizeof(iev)); iev.iev_flags = c->ic_flags; iev.iev_freq = c->ic_freq; iev.iev_ieee = c->ic_ieee; CURVNET_SET(ifp->if_vnet); rt_ieee80211msg(ifp, RTM_IEEE80211_RADAR, &iev, sizeof(iev)); CURVNET_RESTORE(); } void ieee80211_notify_cac(struct ieee80211com *ic, const struct ieee80211_channel *c, enum ieee80211_notify_cac_event type) { struct ifnet *ifp = ic->ic_ifp; struct ieee80211_cac_event iev; memset(&iev, 0, sizeof(iev)); iev.iev_flags = c->ic_flags; iev.iev_freq = c->ic_freq; iev.iev_ieee = c->ic_ieee; iev.iev_type = type; CURVNET_SET(ifp->if_vnet); rt_ieee80211msg(ifp, RTM_IEEE80211_CAC, &iev, sizeof(iev)); CURVNET_RESTORE(); } void ieee80211_notify_node_deauth(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ifnet *ifp = vap->iv_ifp; IEEE80211_NOTE(vap, IEEE80211_MSG_NODE, ni, "%s", "node deauth"); notify_macaddr(ifp, RTM_IEEE80211_DEAUTH, ni->ni_macaddr); } void ieee80211_notify_node_auth(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ifnet *ifp = vap->iv_ifp; IEEE80211_NOTE(vap, IEEE80211_MSG_NODE, ni, "%s", "node auth"); notify_macaddr(ifp, RTM_IEEE80211_AUTH, ni->ni_macaddr); } void ieee80211_notify_country(struct ieee80211vap *vap, const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t cc[2]) { struct ifnet *ifp = vap->iv_ifp; struct ieee80211_country_event iev; memset(&iev, 0, sizeof(iev)); IEEE80211_ADDR_COPY(iev.iev_addr, bssid); iev.iev_cc[0] = cc[0]; iev.iev_cc[1] = cc[1]; CURVNET_SET(ifp->if_vnet); rt_ieee80211msg(ifp, RTM_IEEE80211_COUNTRY, &iev, sizeof(iev)); CURVNET_RESTORE(); } void ieee80211_notify_radio(struct ieee80211com *ic, int state) { struct ifnet *ifp = ic->ic_ifp; struct ieee80211_radio_event iev; memset(&iev, 0, sizeof(iev)); iev.iev_state = state; CURVNET_SET(ifp->if_vnet); rt_ieee80211msg(ifp, RTM_IEEE80211_RADIO, &iev, sizeof(iev)); CURVNET_RESTORE(); } void ieee80211_load_module(const char *modname) { #ifdef notyet (void)kern_kldload(curthread, modname, NULL); #else printf("%s: load the %s module by hand for now.\n", __func__, modname); #endif } static eventhandler_tag wlan_bpfevent; static eventhandler_tag wlan_ifllevent; static void bpf_track(void *arg, struct ifnet *ifp, int dlt, int attach) { /* NB: identify vap's by if_init */ if (dlt == DLT_IEEE802_11_RADIO && ifp->if_init == ieee80211_init) { struct ieee80211vap *vap = ifp->if_softc; /* * Track bpf radiotap listener state. We mark the vap * to indicate if any listener is present and the com * to indicate if any listener exists on any associated * vap. This flag is used by drivers to prepare radiotap * state only when needed. */ if (attach) { ieee80211_syncflag_ext(vap, IEEE80211_FEXT_BPF); if (vap->iv_opmode == IEEE80211_M_MONITOR) atomic_add_int(&vap->iv_ic->ic_montaps, 1); } else if (!bpf_peers_present(vap->iv_rawbpf)) { ieee80211_syncflag_ext(vap, -IEEE80211_FEXT_BPF); if (vap->iv_opmode == IEEE80211_M_MONITOR) atomic_subtract_int(&vap->iv_ic->ic_montaps, 1); } } } static void wlan_iflladdr(void *arg __unused, struct ifnet *ifp) { struct ieee80211com *ic = ifp->if_l2com; struct ieee80211vap *vap, *next; if (ifp->if_type != IFT_IEEE80211 || ic == NULL) return; IEEE80211_LOCK(ic); TAILQ_FOREACH_SAFE(vap, &ic->ic_vaps, iv_next, next) { /* * If the MAC address has changed on the parent and it was * copied to the vap on creation then re-sync. */ if (vap->iv_ic == ic && (vap->iv_flags_ext & IEEE80211_FEXT_UNIQMAC) == 0) { IEEE80211_ADDR_COPY(vap->iv_myaddr, IF_LLADDR(ifp)); IEEE80211_UNLOCK(ic); if_setlladdr(vap->iv_ifp, IF_LLADDR(ifp), IEEE80211_ADDR_LEN); IEEE80211_LOCK(ic); } } IEEE80211_UNLOCK(ic); } /* * Module glue. * * NB: the module name is "wlan" for compatibility with NetBSD. */ static int wlan_modevent(module_t mod, int type, void *unused) { switch (type) { case MOD_LOAD: if (bootverbose) printf("wlan: <802.11 Link Layer>\n"); wlan_bpfevent = EVENTHANDLER_REGISTER(bpf_track, bpf_track, 0, EVENTHANDLER_PRI_ANY); wlan_ifllevent = EVENTHANDLER_REGISTER(iflladdr_event, wlan_iflladdr, NULL, EVENTHANDLER_PRI_ANY); #if __FreeBSD_version >= 1000020 wlan_cloner = if_clone_simple(wlanname, wlan_clone_create, wlan_clone_destroy, 0); #else if_clone_attach(&wlan_cloner); #endif if_register_com_alloc(IFT_IEEE80211, wlan_alloc, wlan_free); return 0; case MOD_UNLOAD: if_deregister_com_alloc(IFT_IEEE80211); #if __FreeBSD_version >= 1000020 if_clone_detach(wlan_cloner); #else if_clone_detach(&wlan_cloner); #endif EVENTHANDLER_DEREGISTER(bpf_track, wlan_bpfevent); EVENTHANDLER_DEREGISTER(iflladdr_event, wlan_ifllevent); return 0; } return EINVAL; } static moduledata_t wlan_mod = { #if __FreeBSD_version >= 1000020 wlanname, #else "wlan", #endif wlan_modevent, 0 }; DECLARE_MODULE(wlan, wlan_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST); MODULE_VERSION(wlan, 1); MODULE_DEPEND(wlan, ether, 1, 1, 1); #ifdef IEEE80211_ALQ MODULE_DEPEND(wlan, alq, 1, 1, 1); #endif /* IEEE80211_ALQ */ Index: head/sys/net80211/ieee80211_ht.c =================================================================== --- head/sys/net80211/ieee80211_ht.c (revision 283528) +++ head/sys/net80211/ieee80211_ht.c (revision 283529) @@ -1,2902 +1,2899 @@ /*- * Copyright (c) 2007-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #ifdef __FreeBSD__ __FBSDID("$FreeBSD$"); #endif /* * IEEE 802.11n protocol support. */ #include "opt_inet.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include /* define here, used throughout file */ #define MS(_v, _f) (((_v) & _f) >> _f##_S) #define SM(_v, _f) (((_v) << _f##_S) & _f) const struct ieee80211_mcs_rates ieee80211_htrates[IEEE80211_HTRATE_MAXSIZE] = { { 13, 14, 27, 30 }, /* MCS 0 */ { 26, 29, 54, 60 }, /* MCS 1 */ { 39, 43, 81, 90 }, /* MCS 2 */ { 52, 58, 108, 120 }, /* MCS 3 */ { 78, 87, 162, 180 }, /* MCS 4 */ { 104, 116, 216, 240 }, /* MCS 5 */ { 117, 130, 243, 270 }, /* MCS 6 */ { 130, 144, 270, 300 }, /* MCS 7 */ { 26, 29, 54, 60 }, /* MCS 8 */ { 52, 58, 108, 120 }, /* MCS 9 */ { 78, 87, 162, 180 }, /* MCS 10 */ { 104, 116, 216, 240 }, /* MCS 11 */ { 156, 173, 324, 360 }, /* MCS 12 */ { 208, 231, 432, 480 }, /* MCS 13 */ { 234, 260, 486, 540 }, /* MCS 14 */ { 260, 289, 540, 600 }, /* MCS 15 */ { 39, 43, 81, 90 }, /* MCS 16 */ { 78, 87, 162, 180 }, /* MCS 17 */ { 117, 130, 243, 270 }, /* MCS 18 */ { 156, 173, 324, 360 }, /* MCS 19 */ { 234, 260, 486, 540 }, /* MCS 20 */ { 312, 347, 648, 720 }, /* MCS 21 */ { 351, 390, 729, 810 }, /* MCS 22 */ { 390, 433, 810, 900 }, /* MCS 23 */ { 52, 58, 108, 120 }, /* MCS 24 */ { 104, 116, 216, 240 }, /* MCS 25 */ { 156, 173, 324, 360 }, /* MCS 26 */ { 208, 231, 432, 480 }, /* MCS 27 */ { 312, 347, 648, 720 }, /* MCS 28 */ { 416, 462, 864, 960 }, /* MCS 29 */ { 468, 520, 972, 1080 }, /* MCS 30 */ { 520, 578, 1080, 1200 }, /* MCS 31 */ { 0, 0, 12, 13 }, /* MCS 32 */ { 78, 87, 162, 180 }, /* MCS 33 */ { 104, 116, 216, 240 }, /* MCS 34 */ { 130, 144, 270, 300 }, /* MCS 35 */ { 117, 130, 243, 270 }, /* MCS 36 */ { 156, 173, 324, 360 }, /* MCS 37 */ { 195, 217, 405, 450 }, /* MCS 38 */ { 104, 116, 216, 240 }, /* MCS 39 */ { 130, 144, 270, 300 }, /* MCS 40 */ { 130, 144, 270, 300 }, /* MCS 41 */ { 156, 173, 324, 360 }, /* MCS 42 */ { 182, 202, 378, 420 }, /* MCS 43 */ { 182, 202, 378, 420 }, /* MCS 44 */ { 208, 231, 432, 480 }, /* MCS 45 */ { 156, 173, 324, 360 }, /* MCS 46 */ { 195, 217, 405, 450 }, /* MCS 47 */ { 195, 217, 405, 450 }, /* MCS 48 */ { 234, 260, 486, 540 }, /* MCS 49 */ { 273, 303, 567, 630 }, /* MCS 50 */ { 273, 303, 567, 630 }, /* MCS 51 */ { 312, 347, 648, 720 }, /* MCS 52 */ { 130, 144, 270, 300 }, /* MCS 53 */ { 156, 173, 324, 360 }, /* MCS 54 */ { 182, 202, 378, 420 }, /* MCS 55 */ { 156, 173, 324, 360 }, /* MCS 56 */ { 182, 202, 378, 420 }, /* MCS 57 */ { 208, 231, 432, 480 }, /* MCS 58 */ { 234, 260, 486, 540 }, /* MCS 59 */ { 208, 231, 432, 480 }, /* MCS 60 */ { 234, 260, 486, 540 }, /* MCS 61 */ { 260, 289, 540, 600 }, /* MCS 62 */ { 260, 289, 540, 600 }, /* MCS 63 */ { 286, 318, 594, 660 }, /* MCS 64 */ { 195, 217, 405, 450 }, /* MCS 65 */ { 234, 260, 486, 540 }, /* MCS 66 */ { 273, 303, 567, 630 }, /* MCS 67 */ { 234, 260, 486, 540 }, /* MCS 68 */ { 273, 303, 567, 630 }, /* MCS 69 */ { 312, 347, 648, 720 }, /* MCS 70 */ { 351, 390, 729, 810 }, /* MCS 71 */ { 312, 347, 648, 720 }, /* MCS 72 */ { 351, 390, 729, 810 }, /* MCS 73 */ { 390, 433, 810, 900 }, /* MCS 74 */ { 390, 433, 810, 900 }, /* MCS 75 */ { 429, 477, 891, 990 }, /* MCS 76 */ }; #ifdef IEEE80211_AMPDU_AGE static int ieee80211_ampdu_age = -1; /* threshold for ampdu reorder q (ms) */ SYSCTL_PROC(_net_wlan, OID_AUTO, ampdu_age, CTLTYPE_INT | CTLFLAG_RW, &ieee80211_ampdu_age, 0, ieee80211_sysctl_msecs_ticks, "I", "AMPDU max reorder age (ms)"); #endif static int ieee80211_recv_bar_ena = 1; SYSCTL_INT(_net_wlan, OID_AUTO, recv_bar, CTLFLAG_RW, &ieee80211_recv_bar_ena, 0, "BAR frame processing (ena/dis)"); static int ieee80211_addba_timeout = -1;/* timeout for ADDBA response */ SYSCTL_PROC(_net_wlan, OID_AUTO, addba_timeout, CTLTYPE_INT | CTLFLAG_RW, &ieee80211_addba_timeout, 0, ieee80211_sysctl_msecs_ticks, "I", "ADDBA request timeout (ms)"); static int ieee80211_addba_backoff = -1;/* backoff after max ADDBA requests */ SYSCTL_PROC(_net_wlan, OID_AUTO, addba_backoff, CTLTYPE_INT | CTLFLAG_RW, &ieee80211_addba_backoff, 0, ieee80211_sysctl_msecs_ticks, "I", "ADDBA request backoff (ms)"); static int ieee80211_addba_maxtries = 3;/* max ADDBA requests before backoff */ SYSCTL_INT(_net_wlan, OID_AUTO, addba_maxtries, CTLFLAG_RW, &ieee80211_addba_maxtries, 0, "max ADDBA requests sent before backoff"); static int ieee80211_bar_timeout = -1; /* timeout waiting for BAR response */ static int ieee80211_bar_maxtries = 50;/* max BAR requests before DELBA */ static ieee80211_recv_action_func ht_recv_action_ba_addba_request; static ieee80211_recv_action_func ht_recv_action_ba_addba_response; static ieee80211_recv_action_func ht_recv_action_ba_delba; static ieee80211_recv_action_func ht_recv_action_ht_mimopwrsave; static ieee80211_recv_action_func ht_recv_action_ht_txchwidth; static ieee80211_send_action_func ht_send_action_ba_addba; static ieee80211_send_action_func ht_send_action_ba_delba; static ieee80211_send_action_func ht_send_action_ht_txchwidth; static void ieee80211_ht_init(void) { /* * Setup HT parameters that depends on the clock frequency. */ #ifdef IEEE80211_AMPDU_AGE ieee80211_ampdu_age = msecs_to_ticks(500); #endif ieee80211_addba_timeout = msecs_to_ticks(250); ieee80211_addba_backoff = msecs_to_ticks(10*1000); ieee80211_bar_timeout = msecs_to_ticks(250); /* * Register action frame handlers. */ ieee80211_recv_action_register(IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_ADDBA_REQUEST, ht_recv_action_ba_addba_request); ieee80211_recv_action_register(IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_ADDBA_RESPONSE, ht_recv_action_ba_addba_response); ieee80211_recv_action_register(IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_DELBA, ht_recv_action_ba_delba); ieee80211_recv_action_register(IEEE80211_ACTION_CAT_HT, IEEE80211_ACTION_HT_MIMOPWRSAVE, ht_recv_action_ht_mimopwrsave); ieee80211_recv_action_register(IEEE80211_ACTION_CAT_HT, IEEE80211_ACTION_HT_TXCHWIDTH, ht_recv_action_ht_txchwidth); ieee80211_send_action_register(IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_ADDBA_REQUEST, ht_send_action_ba_addba); ieee80211_send_action_register(IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_ADDBA_RESPONSE, ht_send_action_ba_addba); ieee80211_send_action_register(IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_DELBA, ht_send_action_ba_delba); ieee80211_send_action_register(IEEE80211_ACTION_CAT_HT, IEEE80211_ACTION_HT_TXCHWIDTH, ht_send_action_ht_txchwidth); } SYSINIT(wlan_ht, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_ht_init, NULL); static int ieee80211_ampdu_enable(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap); static int ieee80211_addba_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int dialogtoken, int baparamset, int batimeout); static int ieee80211_addba_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int code, int baparamset, int batimeout); static void ieee80211_addba_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap); static void null_addba_response_timeout(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap); static void ieee80211_bar_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int status); static void ampdu_tx_stop(struct ieee80211_tx_ampdu *tap); static void bar_stop_timer(struct ieee80211_tx_ampdu *tap); static int ampdu_rx_start(struct ieee80211_node *, struct ieee80211_rx_ampdu *, int baparamset, int batimeout, int baseqctl); static void ampdu_rx_stop(struct ieee80211_node *, struct ieee80211_rx_ampdu *); void ieee80211_ht_attach(struct ieee80211com *ic) { /* setup default aggregation policy */ ic->ic_recv_action = ieee80211_recv_action; ic->ic_send_action = ieee80211_send_action; ic->ic_ampdu_enable = ieee80211_ampdu_enable; ic->ic_addba_request = ieee80211_addba_request; ic->ic_addba_response = ieee80211_addba_response; ic->ic_addba_response_timeout = null_addba_response_timeout; ic->ic_addba_stop = ieee80211_addba_stop; ic->ic_bar_response = ieee80211_bar_response; ic->ic_ampdu_rx_start = ampdu_rx_start; ic->ic_ampdu_rx_stop = ampdu_rx_stop; ic->ic_htprotmode = IEEE80211_PROT_RTSCTS; ic->ic_curhtprotmode = IEEE80211_HTINFO_OPMODE_PURE; } void ieee80211_ht_detach(struct ieee80211com *ic) { } void ieee80211_ht_vattach(struct ieee80211vap *vap) { /* driver can override defaults */ vap->iv_ampdu_rxmax = IEEE80211_HTCAP_MAXRXAMPDU_8K; vap->iv_ampdu_density = IEEE80211_HTCAP_MPDUDENSITY_NA; vap->iv_ampdu_limit = vap->iv_ampdu_rxmax; vap->iv_amsdu_limit = vap->iv_htcaps & IEEE80211_HTCAP_MAXAMSDU; /* tx aggregation traffic thresholds */ vap->iv_ampdu_mintraffic[WME_AC_BK] = 128; vap->iv_ampdu_mintraffic[WME_AC_BE] = 64; vap->iv_ampdu_mintraffic[WME_AC_VO] = 32; vap->iv_ampdu_mintraffic[WME_AC_VI] = 32; if (vap->iv_htcaps & IEEE80211_HTC_HT) { /* * Device is HT capable; enable all HT-related * facilities by default. * XXX these choices may be too aggressive. */ vap->iv_flags_ht |= IEEE80211_FHT_HT | IEEE80211_FHT_HTCOMPAT ; if (vap->iv_htcaps & IEEE80211_HTCAP_SHORTGI20) vap->iv_flags_ht |= IEEE80211_FHT_SHORTGI20; /* XXX infer from channel list? */ if (vap->iv_htcaps & IEEE80211_HTCAP_CHWIDTH40) { vap->iv_flags_ht |= IEEE80211_FHT_USEHT40; if (vap->iv_htcaps & IEEE80211_HTCAP_SHORTGI40) vap->iv_flags_ht |= IEEE80211_FHT_SHORTGI40; } /* enable RIFS if capable */ if (vap->iv_htcaps & IEEE80211_HTC_RIFS) vap->iv_flags_ht |= IEEE80211_FHT_RIFS; /* NB: A-MPDU and A-MSDU rx are mandated, these are tx only */ vap->iv_flags_ht |= IEEE80211_FHT_AMPDU_RX; if (vap->iv_htcaps & IEEE80211_HTC_AMPDU) vap->iv_flags_ht |= IEEE80211_FHT_AMPDU_TX; vap->iv_flags_ht |= IEEE80211_FHT_AMSDU_RX; if (vap->iv_htcaps & IEEE80211_HTC_AMSDU) vap->iv_flags_ht |= IEEE80211_FHT_AMSDU_TX; } /* NB: disable default legacy WDS, too many issues right now */ if (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) vap->iv_flags_ht &= ~IEEE80211_FHT_HT; } void ieee80211_ht_vdetach(struct ieee80211vap *vap) { } static int ht_getrate(struct ieee80211com *ic, int index, enum ieee80211_phymode mode, int ratetype) { int mword, rate; mword = ieee80211_rate2media(ic, index | IEEE80211_RATE_MCS, mode); if (IFM_SUBTYPE(mword) != IFM_IEEE80211_MCS) return (0); switch (ratetype) { case 0: rate = ieee80211_htrates[index].ht20_rate_800ns; break; case 1: rate = ieee80211_htrates[index].ht20_rate_400ns; break; case 2: rate = ieee80211_htrates[index].ht40_rate_800ns; break; default: rate = ieee80211_htrates[index].ht40_rate_400ns; break; } return (rate); } static struct printranges { int minmcs; int maxmcs; int txstream; int ratetype; int htcapflags; } ranges[] = { { 0, 7, 1, 0, 0 }, { 8, 15, 2, 0, 0 }, { 16, 23, 3, 0, 0 }, { 24, 31, 4, 0, 0 }, { 32, 0, 1, 2, IEEE80211_HTC_TXMCS32 }, { 33, 38, 2, 0, IEEE80211_HTC_TXUNEQUAL }, { 39, 52, 3, 0, IEEE80211_HTC_TXUNEQUAL }, { 53, 76, 4, 0, IEEE80211_HTC_TXUNEQUAL }, { 0, 0, 0, 0, 0 }, }; static void ht_rateprint(struct ieee80211com *ic, enum ieee80211_phymode mode, int ratetype) { - struct ifnet *ifp = ic->ic_ifp; int minrate, maxrate; struct printranges *range; for (range = ranges; range->txstream != 0; range++) { if (ic->ic_txstream < range->txstream) continue; if (range->htcapflags && (ic->ic_htcaps & range->htcapflags) == 0) continue; if (ratetype < range->ratetype) continue; minrate = ht_getrate(ic, range->minmcs, mode, ratetype); maxrate = ht_getrate(ic, range->maxmcs, mode, ratetype); if (range->maxmcs) { - if_printf(ifp, "MCS %d-%d: %d%sMbps - %d%sMbps\n", + ic_printf(ic, "MCS %d-%d: %d%sMbps - %d%sMbps\n", range->minmcs, range->maxmcs, minrate/2, ((minrate & 0x1) != 0 ? ".5" : ""), maxrate/2, ((maxrate & 0x1) != 0 ? ".5" : "")); } else { - if_printf(ifp, "MCS %d: %d%sMbps\n", range->minmcs, + ic_printf(ic, "MCS %d: %d%sMbps\n", range->minmcs, minrate/2, ((minrate & 0x1) != 0 ? ".5" : "")); } } } static void ht_announce(struct ieee80211com *ic, enum ieee80211_phymode mode) { - struct ifnet *ifp = ic->ic_ifp; const char *modestr = ieee80211_phymode_name[mode]; - if_printf(ifp, "%s MCS 20MHz\n", modestr); + ic_printf(ic, "%s MCS 20MHz\n", modestr); ht_rateprint(ic, mode, 0); if (ic->ic_htcaps & IEEE80211_HTCAP_SHORTGI20) { - if_printf(ifp, "%s MCS 20MHz SGI\n", modestr); + ic_printf(ic, "%s MCS 20MHz SGI\n", modestr); ht_rateprint(ic, mode, 1); } if (ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) { - if_printf(ifp, "%s MCS 40MHz:\n", modestr); + ic_printf(ic, "%s MCS 40MHz:\n", modestr); ht_rateprint(ic, mode, 2); } if ((ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) && (ic->ic_htcaps & IEEE80211_HTCAP_SHORTGI40)) { - if_printf(ifp, "%s MCS 40MHz SGI:\n", modestr); + ic_printf(ic, "%s MCS 40MHz SGI:\n", modestr); ht_rateprint(ic, mode, 3); } } void ieee80211_ht_announce(struct ieee80211com *ic) { - struct ifnet *ifp = ic->ic_ifp; if (isset(ic->ic_modecaps, IEEE80211_MODE_11NA) || isset(ic->ic_modecaps, IEEE80211_MODE_11NG)) - if_printf(ifp, "%dT%dR\n", ic->ic_txstream, ic->ic_rxstream); + ic_printf(ic, "%dT%dR\n", ic->ic_txstream, ic->ic_rxstream); if (isset(ic->ic_modecaps, IEEE80211_MODE_11NA)) ht_announce(ic, IEEE80211_MODE_11NA); if (isset(ic->ic_modecaps, IEEE80211_MODE_11NG)) ht_announce(ic, IEEE80211_MODE_11NG); } static struct ieee80211_htrateset htrateset; const struct ieee80211_htrateset * ieee80211_get_suphtrates(struct ieee80211com *ic, const struct ieee80211_channel *c) { #define ADDRATE(x) do { \ htrateset.rs_rates[htrateset.rs_nrates] = x; \ htrateset.rs_nrates++; \ } while (0) int i; memset(&htrateset, 0, sizeof(struct ieee80211_htrateset)); for (i = 0; i < ic->ic_txstream * 8; i++) ADDRATE(i); if ((ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) && (ic->ic_htcaps & IEEE80211_HTC_TXMCS32)) ADDRATE(32); if (ic->ic_htcaps & IEEE80211_HTC_TXUNEQUAL) { if (ic->ic_txstream >= 2) { for (i = 33; i <= 38; i++) ADDRATE(i); } if (ic->ic_txstream >= 3) { for (i = 39; i <= 52; i++) ADDRATE(i); } if (ic->ic_txstream == 4) { for (i = 53; i <= 76; i++) ADDRATE(i); } } return &htrateset; #undef ADDRATE } /* * Receive processing. */ /* * Decap the encapsulated A-MSDU frames and dispatch all but * the last for delivery. The last frame is returned for * delivery via the normal path. */ struct mbuf * ieee80211_decap_amsdu(struct ieee80211_node *ni, struct mbuf *m) { struct ieee80211vap *vap = ni->ni_vap; int framelen; struct mbuf *n; /* discard 802.3 header inserted by ieee80211_decap */ m_adj(m, sizeof(struct ether_header)); vap->iv_stats.is_amsdu_decap++; for (;;) { /* * Decap the first frame, bust it apart from the * remainder and deliver. We leave the last frame * delivery to the caller (for consistency with other * code paths, could also do it here). */ m = ieee80211_decap1(m, &framelen); if (m == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "a-msdu", "%s", "decap failed"); vap->iv_stats.is_amsdu_tooshort++; return NULL; } if (m->m_pkthdr.len == framelen) break; n = m_split(m, framelen, M_NOWAIT); if (n == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "a-msdu", "%s", "unable to split encapsulated frames"); vap->iv_stats.is_amsdu_split++; m_freem(m); /* NB: must reclaim */ return NULL; } vap->iv_deliver_data(vap, ni, m); /* * Remove frame contents; each intermediate frame * is required to be aligned to a 4-byte boundary. */ m = n; m_adj(m, roundup2(framelen, 4) - framelen); /* padding */ } return m; /* last delivered by caller */ } /* * Purge all frames in the A-MPDU re-order queue. */ static void ampdu_rx_purge(struct ieee80211_rx_ampdu *rap) { struct mbuf *m; int i; for (i = 0; i < rap->rxa_wnd; i++) { m = rap->rxa_m[i]; if (m != NULL) { rap->rxa_m[i] = NULL; rap->rxa_qbytes -= m->m_pkthdr.len; m_freem(m); if (--rap->rxa_qframes == 0) break; } } KASSERT(rap->rxa_qbytes == 0 && rap->rxa_qframes == 0, ("lost %u data, %u frames on ampdu rx q", rap->rxa_qbytes, rap->rxa_qframes)); } /* * Start A-MPDU rx/re-order processing for the specified TID. */ static int ampdu_rx_start(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap, int baparamset, int batimeout, int baseqctl) { int bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ); if (rap->rxa_flags & IEEE80211_AGGR_RUNNING) { /* * AMPDU previously setup and not terminated with a DELBA, * flush the reorder q's in case anything remains. */ ampdu_rx_purge(rap); } memset(rap, 0, sizeof(*rap)); rap->rxa_wnd = (bufsiz == 0) ? IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX); rap->rxa_start = MS(baseqctl, IEEE80211_BASEQ_START); rap->rxa_flags |= IEEE80211_AGGR_RUNNING | IEEE80211_AGGR_XCHGPEND; return 0; } /* * Stop A-MPDU rx processing for the specified TID. */ static void ampdu_rx_stop(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap) { ampdu_rx_purge(rap); rap->rxa_flags &= ~(IEEE80211_AGGR_RUNNING | IEEE80211_AGGR_XCHGPEND); } /* * Dispatch a frame from the A-MPDU reorder queue. The * frame is fed back into ieee80211_input marked with an * M_AMPDU_MPDU flag so it doesn't come back to us (it also * permits ieee80211_input to optimize re-processing). */ static __inline void ampdu_dispatch(struct ieee80211_node *ni, struct mbuf *m) { m->m_flags |= M_AMPDU_MPDU; /* bypass normal processing */ /* NB: rssi and noise are ignored w/ M_AMPDU_MPDU set */ (void) ieee80211_input(ni, m, 0, 0); } /* * Dispatch as many frames as possible from the re-order queue. * Frames will always be "at the front"; we process all frames * up to the first empty slot in the window. On completion we * cleanup state if there are still pending frames in the current * BA window. We assume the frame at slot 0 is already handled * by the caller; we always start at slot 1. */ static void ampdu_rx_dispatch(struct ieee80211_rx_ampdu *rap, struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct mbuf *m; int i; /* flush run of frames */ for (i = 1; i < rap->rxa_wnd; i++) { m = rap->rxa_m[i]; if (m == NULL) break; rap->rxa_m[i] = NULL; rap->rxa_qbytes -= m->m_pkthdr.len; rap->rxa_qframes--; ampdu_dispatch(ni, m); } /* * If frames remain, copy the mbuf pointers down so * they correspond to the offsets in the new window. */ if (rap->rxa_qframes != 0) { int n = rap->rxa_qframes, j; for (j = i+1; j < rap->rxa_wnd; j++) { if (rap->rxa_m[j] != NULL) { rap->rxa_m[j-i] = rap->rxa_m[j]; rap->rxa_m[j] = NULL; if (--n == 0) break; } } KASSERT(n == 0, ("lost %d frames", n)); vap->iv_stats.is_ampdu_rx_copy += rap->rxa_qframes; } /* * Adjust the start of the BA window to * reflect the frames just dispatched. */ rap->rxa_start = IEEE80211_SEQ_ADD(rap->rxa_start, i); vap->iv_stats.is_ampdu_rx_oor += i; } #ifdef IEEE80211_AMPDU_AGE /* * Dispatch all frames in the A-MPDU re-order queue. */ static void ampdu_rx_flush(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap) { struct ieee80211vap *vap = ni->ni_vap; struct mbuf *m; int i; for (i = 0; i < rap->rxa_wnd; i++) { m = rap->rxa_m[i]; if (m == NULL) continue; rap->rxa_m[i] = NULL; rap->rxa_qbytes -= m->m_pkthdr.len; rap->rxa_qframes--; vap->iv_stats.is_ampdu_rx_oor++; ampdu_dispatch(ni, m); if (rap->rxa_qframes == 0) break; } } #endif /* IEEE80211_AMPDU_AGE */ /* * Dispatch all frames in the A-MPDU re-order queue * preceding the specified sequence number. This logic * handles window moves due to a received MSDU or BAR. */ static void ampdu_rx_flush_upto(struct ieee80211_node *ni, struct ieee80211_rx_ampdu *rap, ieee80211_seq winstart) { struct ieee80211vap *vap = ni->ni_vap; struct mbuf *m; ieee80211_seq seqno; int i; /* * Flush any complete MSDU's with a sequence number lower * than winstart. Gaps may exist. Note that we may actually * dispatch frames past winstart if a run continues; this is * an optimization that avoids having to do a separate pass * to dispatch frames after moving the BA window start. */ seqno = rap->rxa_start; for (i = 0; i < rap->rxa_wnd; i++) { m = rap->rxa_m[i]; if (m != NULL) { rap->rxa_m[i] = NULL; rap->rxa_qbytes -= m->m_pkthdr.len; rap->rxa_qframes--; vap->iv_stats.is_ampdu_rx_oor++; ampdu_dispatch(ni, m); } else { if (!IEEE80211_SEQ_BA_BEFORE(seqno, winstart)) break; } seqno = IEEE80211_SEQ_INC(seqno); } /* * If frames remain, copy the mbuf pointers down so * they correspond to the offsets in the new window. */ if (rap->rxa_qframes != 0) { int n = rap->rxa_qframes, j; /* NB: this loop assumes i > 0 and/or rxa_m[0] is NULL */ KASSERT(rap->rxa_m[0] == NULL, ("%s: BA window slot 0 occupied", __func__)); for (j = i+1; j < rap->rxa_wnd; j++) { if (rap->rxa_m[j] != NULL) { rap->rxa_m[j-i] = rap->rxa_m[j]; rap->rxa_m[j] = NULL; if (--n == 0) break; } } KASSERT(n == 0, ("%s: lost %d frames, qframes %d off %d " "BA win <%d:%d> winstart %d", __func__, n, rap->rxa_qframes, i, rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1), winstart)); vap->iv_stats.is_ampdu_rx_copy += rap->rxa_qframes; } /* * Move the start of the BA window; we use the * sequence number of the last MSDU that was * passed up the stack+1 or winstart if stopped on * a gap in the reorder buffer. */ rap->rxa_start = seqno; } /* * Process a received QoS data frame for an HT station. Handle * A-MPDU reordering: if this frame is received out of order * and falls within the BA window hold onto it. Otherwise if * this frame completes a run, flush any pending frames. We * return 1 if the frame is consumed. A 0 is returned if * the frame should be processed normally by the caller. */ int ieee80211_ampdu_reorder(struct ieee80211_node *ni, struct mbuf *m) { #define IEEE80211_FC0_QOSDATA \ (IEEE80211_FC0_TYPE_DATA|IEEE80211_FC0_SUBTYPE_QOS|IEEE80211_FC0_VERSION_0) #define PROCESS 0 /* caller should process frame */ #define CONSUMED 1 /* frame consumed, caller does nothing */ struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_qosframe *wh; struct ieee80211_rx_ampdu *rap; ieee80211_seq rxseq; uint8_t tid; int off; KASSERT((m->m_flags & (M_AMPDU | M_AMPDU_MPDU)) == M_AMPDU, ("!a-mpdu or already re-ordered, flags 0x%x", m->m_flags)); KASSERT(ni->ni_flags & IEEE80211_NODE_HT, ("not an HT sta")); /* NB: m_len known to be sufficient */ wh = mtod(m, struct ieee80211_qosframe *); if (wh->i_fc[0] != IEEE80211_FC0_QOSDATA) { /* * Not QoS data, shouldn't get here but just * return it to the caller for processing. */ return PROCESS; } if (IEEE80211_IS_DSTODS(wh)) tid = ((struct ieee80211_qosframe_addr4 *)wh)->i_qos[0]; else tid = wh->i_qos[0]; tid &= IEEE80211_QOS_TID; rap = &ni->ni_rx_ampdu[tid]; if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0) { /* * No ADDBA request yet, don't touch. */ return PROCESS; } rxseq = le16toh(*(uint16_t *)wh->i_seq); if ((rxseq & IEEE80211_SEQ_FRAG_MASK) != 0) { /* * Fragments are not allowed; toss. */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr, "A-MPDU", "fragment, rxseq 0x%x tid %u%s", rxseq, tid, wh->i_fc[1] & IEEE80211_FC1_RETRY ? " (retransmit)" : ""); vap->iv_stats.is_ampdu_rx_drop++; IEEE80211_NODE_STAT(ni, rx_drop); m_freem(m); return CONSUMED; } rxseq >>= IEEE80211_SEQ_SEQ_SHIFT; rap->rxa_nframes++; again: if (rxseq == rap->rxa_start) { /* * First frame in window. */ if (rap->rxa_qframes != 0) { /* * Dispatch as many packets as we can. */ KASSERT(rap->rxa_m[0] == NULL, ("unexpected dup")); ampdu_dispatch(ni, m); ampdu_rx_dispatch(rap, ni); return CONSUMED; } else { /* * In order; advance window and notify * caller to dispatch directly. */ rap->rxa_start = IEEE80211_SEQ_INC(rxseq); return PROCESS; } } /* * Frame is out of order; store if in the BA window. */ /* calculate offset in BA window */ off = IEEE80211_SEQ_SUB(rxseq, rap->rxa_start); if (off < rap->rxa_wnd) { /* * Common case (hopefully): in the BA window. * Sec 9.10.7.6.2 a) (p.137) */ #ifdef IEEE80211_AMPDU_AGE /* * Check for frames sitting too long in the reorder queue. * This should only ever happen if frames are not delivered * without the sender otherwise notifying us (e.g. with a * BAR to move the window). Typically this happens because * of vendor bugs that cause the sequence number to jump. * When this happens we get a gap in the reorder queue that * leaves frame sitting on the queue until they get pushed * out due to window moves. When the vendor does not send * BAR this move only happens due to explicit packet sends * * NB: we only track the time of the oldest frame in the * reorder q; this means that if we flush we might push * frames that still "new"; if this happens then subsequent * frames will result in BA window moves which cost something * but is still better than a big throughput dip. */ if (rap->rxa_qframes != 0) { /* XXX honor batimeout? */ if (ticks - rap->rxa_age > ieee80211_ampdu_age) { /* * Too long since we received the first * frame; flush the reorder buffer. */ if (rap->rxa_qframes != 0) { vap->iv_stats.is_ampdu_rx_age += rap->rxa_qframes; ampdu_rx_flush(ni, rap); } rap->rxa_start = IEEE80211_SEQ_INC(rxseq); return PROCESS; } } else { /* * First frame, start aging timer. */ rap->rxa_age = ticks; } #endif /* IEEE80211_AMPDU_AGE */ /* save packet */ if (rap->rxa_m[off] == NULL) { rap->rxa_m[off] = m; rap->rxa_qframes++; rap->rxa_qbytes += m->m_pkthdr.len; vap->iv_stats.is_ampdu_rx_reorder++; } else { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr, "a-mpdu duplicate", "seqno %u tid %u BA win <%u:%u>", rxseq, tid, rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1)); vap->iv_stats.is_rx_dup++; IEEE80211_NODE_STAT(ni, rx_dup); m_freem(m); } return CONSUMED; } if (off < IEEE80211_SEQ_BA_RANGE) { /* * Outside the BA window, but within range; * flush the reorder q and move the window. * Sec 9.10.7.6.2 b) (p.138) */ IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni, "move BA win <%u:%u> (%u frames) rxseq %u tid %u", rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1), rap->rxa_qframes, rxseq, tid); vap->iv_stats.is_ampdu_rx_move++; /* * The spec says to flush frames up to but not including: * WinStart_B = rxseq - rap->rxa_wnd + 1 * Then insert the frame or notify the caller to process * it immediately. We can safely do this by just starting * over again because we know the frame will now be within * the BA window. */ /* NB: rxa_wnd known to be >0 */ ampdu_rx_flush_upto(ni, rap, IEEE80211_SEQ_SUB(rxseq, rap->rxa_wnd-1)); goto again; } else { /* * Outside the BA window and out of range; toss. * Sec 9.10.7.6.2 c) (p.138) */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr, "MPDU", "BA win <%u:%u> (%u frames) rxseq %u tid %u%s", rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1), rap->rxa_qframes, rxseq, tid, wh->i_fc[1] & IEEE80211_FC1_RETRY ? " (retransmit)" : ""); vap->iv_stats.is_ampdu_rx_drop++; IEEE80211_NODE_STAT(ni, rx_drop); m_freem(m); return CONSUMED; } #undef CONSUMED #undef PROCESS #undef IEEE80211_FC0_QOSDATA } /* * Process a BAR ctl frame. Dispatch all frames up to * the sequence number of the frame. If this frame is * out of range it's discarded. */ void ieee80211_recv_bar(struct ieee80211_node *ni, struct mbuf *m0) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_frame_bar *wh; struct ieee80211_rx_ampdu *rap; ieee80211_seq rxseq; int tid, off; if (!ieee80211_recv_bar_ena) { #if 0 IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_11N, ni->ni_macaddr, "BAR", "%s", "processing disabled"); #endif vap->iv_stats.is_ampdu_bar_bad++; return; } wh = mtod(m0, struct ieee80211_frame_bar *); /* XXX check basic BAR */ tid = MS(le16toh(wh->i_ctl), IEEE80211_BAR_TID); rap = &ni->ni_rx_ampdu[tid]; if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0) { /* * No ADDBA request yet, don't touch. */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr, "BAR", "no BA stream, tid %u", tid); vap->iv_stats.is_ampdu_bar_bad++; return; } vap->iv_stats.is_ampdu_bar_rx++; rxseq = le16toh(wh->i_seq) >> IEEE80211_SEQ_SEQ_SHIFT; if (rxseq == rap->rxa_start) return; /* calculate offset in BA window */ off = IEEE80211_SEQ_SUB(rxseq, rap->rxa_start); if (off < IEEE80211_SEQ_BA_RANGE) { /* * Flush the reorder q up to rxseq and move the window. * Sec 9.10.7.6.3 a) (p.138) */ IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni, "BAR moves BA win <%u:%u> (%u frames) rxseq %u tid %u", rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1), rap->rxa_qframes, rxseq, tid); vap->iv_stats.is_ampdu_bar_move++; ampdu_rx_flush_upto(ni, rap, rxseq); if (off >= rap->rxa_wnd) { /* * BAR specifies a window start to the right of BA * window; we must move it explicitly since * ampdu_rx_flush_upto will not. */ rap->rxa_start = rxseq; } } else { /* * Out of range; toss. * Sec 9.10.7.6.3 b) (p.138) */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_11N, ni->ni_macaddr, "BAR", "BA win <%u:%u> (%u frames) rxseq %u tid %u%s", rap->rxa_start, IEEE80211_SEQ_ADD(rap->rxa_start, rap->rxa_wnd-1), rap->rxa_qframes, rxseq, tid, wh->i_fc[1] & IEEE80211_FC1_RETRY ? " (retransmit)" : ""); vap->iv_stats.is_ampdu_bar_oow++; IEEE80211_NODE_STAT(ni, rx_drop); } } /* * Setup HT-specific state in a node. Called only * when HT use is negotiated so we don't do extra * work for temporary and/or legacy sta's. */ void ieee80211_ht_node_init(struct ieee80211_node *ni) { struct ieee80211_tx_ampdu *tap; int tid; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "%s: called", __func__); if (ni->ni_flags & IEEE80211_NODE_HT) { /* * Clean AMPDU state on re-associate. This handles the case * where a station leaves w/o notifying us and then returns * before node is reaped for inactivity. */ IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "%s: calling cleanup", __func__); ieee80211_ht_node_cleanup(ni); } for (tid = 0; tid < WME_NUM_TID; tid++) { tap = &ni->ni_tx_ampdu[tid]; tap->txa_tid = tid; tap->txa_ni = ni; tap->txa_lastsample = ticks; /* NB: further initialization deferred */ } ni->ni_flags |= IEEE80211_NODE_HT | IEEE80211_NODE_AMPDU; } /* * Cleanup HT-specific state in a node. Called only * when HT use has been marked. */ void ieee80211_ht_node_cleanup(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; int i; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "%s: called", __func__); KASSERT(ni->ni_flags & IEEE80211_NODE_HT, ("not an HT node")); /* XXX optimize this */ for (i = 0; i < WME_NUM_TID; i++) { struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[i]; if (tap->txa_flags & IEEE80211_AGGR_SETUP) ampdu_tx_stop(tap); } for (i = 0; i < WME_NUM_TID; i++) ic->ic_ampdu_rx_stop(ni, &ni->ni_rx_ampdu[i]); ni->ni_htcap = 0; ni->ni_flags &= ~IEEE80211_NODE_HT_ALL; } /* * Age out HT resources for a station. */ void ieee80211_ht_node_age(struct ieee80211_node *ni) { #ifdef IEEE80211_AMPDU_AGE struct ieee80211vap *vap = ni->ni_vap; uint8_t tid; #endif KASSERT(ni->ni_flags & IEEE80211_NODE_HT, ("not an HT sta")); #ifdef IEEE80211_AMPDU_AGE for (tid = 0; tid < WME_NUM_TID; tid++) { struct ieee80211_rx_ampdu *rap; rap = &ni->ni_rx_ampdu[tid]; if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0) continue; if (rap->rxa_qframes == 0) continue; /* * Check for frames sitting too long in the reorder queue. * See above for more details on what's happening here. */ /* XXX honor batimeout? */ if (ticks - rap->rxa_age > ieee80211_ampdu_age) { /* * Too long since we received the first * frame; flush the reorder buffer. */ vap->iv_stats.is_ampdu_rx_age += rap->rxa_qframes; ampdu_rx_flush(ni, rap); } } #endif /* IEEE80211_AMPDU_AGE */ } static struct ieee80211_channel * findhtchan(struct ieee80211com *ic, struct ieee80211_channel *c, int htflags) { return ieee80211_find_channel(ic, c->ic_freq, (c->ic_flags &~ IEEE80211_CHAN_HT) | htflags); } /* * Adjust a channel to be HT/non-HT according to the vap's configuration. */ struct ieee80211_channel * ieee80211_ht_adjust_channel(struct ieee80211com *ic, struct ieee80211_channel *chan, int flags) { struct ieee80211_channel *c; if (flags & IEEE80211_FHT_HT) { /* promote to HT if possible */ if (flags & IEEE80211_FHT_USEHT40) { if (!IEEE80211_IS_CHAN_HT40(chan)) { /* NB: arbitrarily pick ht40+ over ht40- */ c = findhtchan(ic, chan, IEEE80211_CHAN_HT40U); if (c == NULL) c = findhtchan(ic, chan, IEEE80211_CHAN_HT40D); if (c == NULL) c = findhtchan(ic, chan, IEEE80211_CHAN_HT20); if (c != NULL) chan = c; } } else if (!IEEE80211_IS_CHAN_HT20(chan)) { c = findhtchan(ic, chan, IEEE80211_CHAN_HT20); if (c != NULL) chan = c; } } else if (IEEE80211_IS_CHAN_HT(chan)) { /* demote to legacy, HT use is disabled */ c = ieee80211_find_channel(ic, chan->ic_freq, chan->ic_flags &~ IEEE80211_CHAN_HT); if (c != NULL) chan = c; } return chan; } /* * Setup HT-specific state for a legacy WDS peer. */ void ieee80211_ht_wds_init(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_tx_ampdu *tap; int tid; KASSERT(vap->iv_flags_ht & IEEE80211_FHT_HT, ("no HT requested")); /* XXX check scan cache in case peer has an ap and we have info */ /* * If setup with a legacy channel; locate an HT channel. * Otherwise if the inherited channel (from a companion * AP) is suitable use it so we use the same location * for the extension channel). */ ni->ni_chan = ieee80211_ht_adjust_channel(ni->ni_ic, ni->ni_chan, ieee80211_htchanflags(ni->ni_chan)); ni->ni_htcap = 0; if (vap->iv_flags_ht & IEEE80211_FHT_SHORTGI20) ni->ni_htcap |= IEEE80211_HTCAP_SHORTGI20; if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) { ni->ni_htcap |= IEEE80211_HTCAP_CHWIDTH40; ni->ni_chw = 40; if (IEEE80211_IS_CHAN_HT40U(ni->ni_chan)) ni->ni_ht2ndchan = IEEE80211_HTINFO_2NDCHAN_ABOVE; else if (IEEE80211_IS_CHAN_HT40D(ni->ni_chan)) ni->ni_ht2ndchan = IEEE80211_HTINFO_2NDCHAN_BELOW; if (vap->iv_flags_ht & IEEE80211_FHT_SHORTGI40) ni->ni_htcap |= IEEE80211_HTCAP_SHORTGI40; } else { ni->ni_chw = 20; ni->ni_ht2ndchan = IEEE80211_HTINFO_2NDCHAN_NONE; } ni->ni_htctlchan = ni->ni_chan->ic_ieee; if (vap->iv_flags_ht & IEEE80211_FHT_RIFS) ni->ni_flags |= IEEE80211_NODE_RIFS; /* XXX does it make sense to enable SMPS? */ ni->ni_htopmode = 0; /* XXX need protection state */ ni->ni_htstbc = 0; /* XXX need info */ for (tid = 0; tid < WME_NUM_TID; tid++) { tap = &ni->ni_tx_ampdu[tid]; tap->txa_tid = tid; tap->txa_lastsample = ticks; } /* NB: AMPDU tx/rx governed by IEEE80211_FHT_AMPDU_{TX,RX} */ ni->ni_flags |= IEEE80211_NODE_HT | IEEE80211_NODE_AMPDU; } /* * Notify hostap vaps of a change in the HTINFO ie. */ static void htinfo_notify(struct ieee80211com *ic) { struct ieee80211vap *vap; int first = 1; IEEE80211_LOCK_ASSERT(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { if (vap->iv_opmode != IEEE80211_M_HOSTAP) continue; if (vap->iv_state != IEEE80211_S_RUN || !IEEE80211_IS_CHAN_HT(vap->iv_bss->ni_chan)) continue; if (first) { IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_11N, vap->iv_bss, "HT bss occupancy change: %d sta, %d ht, " "%d ht40%s, HT protmode now 0x%x" , ic->ic_sta_assoc , ic->ic_ht_sta_assoc , ic->ic_ht40_sta_assoc , (ic->ic_flags_ht & IEEE80211_FHT_NONHT_PR) ? ", non-HT sta present" : "" , ic->ic_curhtprotmode); first = 0; } ieee80211_beacon_notify(vap, IEEE80211_BEACON_HTINFO); } } /* * Calculate HT protection mode from current * state and handle updates. */ static void htinfo_update(struct ieee80211com *ic) { uint8_t protmode; if (ic->ic_sta_assoc != ic->ic_ht_sta_assoc) { protmode = IEEE80211_HTINFO_OPMODE_MIXED | IEEE80211_HTINFO_NONHT_PRESENT; } else if (ic->ic_flags_ht & IEEE80211_FHT_NONHT_PR) { protmode = IEEE80211_HTINFO_OPMODE_PROTOPT | IEEE80211_HTINFO_NONHT_PRESENT; } else if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && IEEE80211_IS_CHAN_HT40(ic->ic_bsschan) && ic->ic_sta_assoc != ic->ic_ht40_sta_assoc) { protmode = IEEE80211_HTINFO_OPMODE_HT20PR; } else { protmode = IEEE80211_HTINFO_OPMODE_PURE; } if (protmode != ic->ic_curhtprotmode) { ic->ic_curhtprotmode = protmode; htinfo_notify(ic); } } /* * Handle an HT station joining a BSS. */ void ieee80211_ht_node_join(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; IEEE80211_LOCK_ASSERT(ic); if (ni->ni_flags & IEEE80211_NODE_HT) { ic->ic_ht_sta_assoc++; if (ni->ni_chw == 40) ic->ic_ht40_sta_assoc++; } htinfo_update(ic); } /* * Handle an HT station leaving a BSS. */ void ieee80211_ht_node_leave(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; IEEE80211_LOCK_ASSERT(ic); if (ni->ni_flags & IEEE80211_NODE_HT) { ic->ic_ht_sta_assoc--; if (ni->ni_chw == 40) ic->ic_ht40_sta_assoc--; } htinfo_update(ic); } /* * Public version of htinfo_update; used for processing * beacon frames from overlapping bss. * * Caller can specify either IEEE80211_HTINFO_OPMODE_MIXED * (on receipt of a beacon that advertises MIXED) or * IEEE80211_HTINFO_OPMODE_PROTOPT (on receipt of a beacon * from an overlapping legacy bss). We treat MIXED with * a higher precedence than PROTOPT (i.e. we will not change * change PROTOPT -> MIXED; only MIXED -> PROTOPT). This * corresponds to how we handle things in htinfo_update. */ void ieee80211_htprot_update(struct ieee80211com *ic, int protmode) { #define OPMODE(x) SM(x, IEEE80211_HTINFO_OPMODE) IEEE80211_LOCK(ic); /* track non-HT station presence */ KASSERT(protmode & IEEE80211_HTINFO_NONHT_PRESENT, ("protmode 0x%x", protmode)); ic->ic_flags_ht |= IEEE80211_FHT_NONHT_PR; ic->ic_lastnonht = ticks; if (protmode != ic->ic_curhtprotmode && (OPMODE(ic->ic_curhtprotmode) != IEEE80211_HTINFO_OPMODE_MIXED || OPMODE(protmode) == IEEE80211_HTINFO_OPMODE_PROTOPT)) { /* push beacon update */ ic->ic_curhtprotmode = protmode; htinfo_notify(ic); } IEEE80211_UNLOCK(ic); #undef OPMODE } /* * Time out presence of an overlapping bss with non-HT * stations. When operating in hostap mode we listen for * beacons from other stations and if we identify a non-HT * station is present we update the opmode field of the * HTINFO ie. To identify when all non-HT stations are * gone we time out this condition. */ void ieee80211_ht_timeout(struct ieee80211com *ic) { IEEE80211_LOCK_ASSERT(ic); if ((ic->ic_flags_ht & IEEE80211_FHT_NONHT_PR) && time_after(ticks, ic->ic_lastnonht + IEEE80211_NONHT_PRESENT_AGE)) { #if 0 IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni, "%s", "time out non-HT STA present on channel"); #endif ic->ic_flags_ht &= ~IEEE80211_FHT_NONHT_PR; htinfo_update(ic); } } /* unalligned little endian access */ #define LE_READ_2(p) \ ((uint16_t) \ ((((const uint8_t *)(p))[0] ) | \ (((const uint8_t *)(p))[1] << 8))) /* * Process an 802.11n HT capabilities ie. */ void ieee80211_parse_htcap(struct ieee80211_node *ni, const uint8_t *ie) { if (ie[0] == IEEE80211_ELEMID_VENDOR) { /* * Station used Vendor OUI ie to associate; * mark the node so when we respond we'll use * the Vendor OUI's and not the standard ie's. */ ni->ni_flags |= IEEE80211_NODE_HTCOMPAT; ie += 4; } else ni->ni_flags &= ~IEEE80211_NODE_HTCOMPAT; ni->ni_htcap = LE_READ_2(ie + __offsetof(struct ieee80211_ie_htcap, hc_cap)); ni->ni_htparam = ie[__offsetof(struct ieee80211_ie_htcap, hc_param)]; } static void htinfo_parse(struct ieee80211_node *ni, const struct ieee80211_ie_htinfo *htinfo) { uint16_t w; ni->ni_htctlchan = htinfo->hi_ctrlchannel; ni->ni_ht2ndchan = SM(htinfo->hi_byte1, IEEE80211_HTINFO_2NDCHAN); w = LE_READ_2(&htinfo->hi_byte2); ni->ni_htopmode = SM(w, IEEE80211_HTINFO_OPMODE); w = LE_READ_2(&htinfo->hi_byte45); ni->ni_htstbc = SM(w, IEEE80211_HTINFO_BASIC_STBCMCS); } /* * Parse an 802.11n HT info ie and save useful information * to the node state. Note this does not effect any state * changes such as for channel width change. */ void ieee80211_parse_htinfo(struct ieee80211_node *ni, const uint8_t *ie) { if (ie[0] == IEEE80211_ELEMID_VENDOR) ie += 4; htinfo_parse(ni, (const struct ieee80211_ie_htinfo *) ie); } /* * Handle 11n channel switch. Use the received HT ie's to * identify the right channel to use. If we cannot locate it * in the channel table then fallback to legacy operation. * Note that we use this information to identify the node's * channel only; the caller is responsible for insuring any * required channel change is done (e.g. in sta mode when * parsing the contents of a beacon frame). */ static int htinfo_update_chw(struct ieee80211_node *ni, int htflags) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211_channel *c; int chanflags; int ret = 0; chanflags = (ni->ni_chan->ic_flags &~ IEEE80211_CHAN_HT) | htflags; if (chanflags != ni->ni_chan->ic_flags) { /* XXX not right for ht40- */ c = ieee80211_find_channel(ic, ni->ni_chan->ic_freq, chanflags); if (c == NULL && (htflags & IEEE80211_CHAN_HT40)) { /* * No HT40 channel entry in our table; fall back * to HT20 operation. This should not happen. */ c = findhtchan(ic, ni->ni_chan, IEEE80211_CHAN_HT20); #if 0 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_11N, ni, "no HT40 channel (freq %u), falling back to HT20", ni->ni_chan->ic_freq); #endif /* XXX stat */ } if (c != NULL && c != ni->ni_chan) { IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_11N, ni, "switch station to HT%d channel %u/0x%x", IEEE80211_IS_CHAN_HT40(c) ? 40 : 20, c->ic_freq, c->ic_flags); ni->ni_chan = c; ret = 1; } /* NB: caller responsible for forcing any channel change */ } /* update node's tx channel width */ ni->ni_chw = IEEE80211_IS_CHAN_HT40(ni->ni_chan)? 40 : 20; return (ret); } /* * Update 11n MIMO PS state according to received htcap. */ static __inline int htcap_update_mimo_ps(struct ieee80211_node *ni) { uint16_t oflags = ni->ni_flags; switch (ni->ni_htcap & IEEE80211_HTCAP_SMPS) { case IEEE80211_HTCAP_SMPS_DYNAMIC: ni->ni_flags |= IEEE80211_NODE_MIMO_PS; ni->ni_flags |= IEEE80211_NODE_MIMO_RTS; break; case IEEE80211_HTCAP_SMPS_ENA: ni->ni_flags |= IEEE80211_NODE_MIMO_PS; ni->ni_flags &= ~IEEE80211_NODE_MIMO_RTS; break; case IEEE80211_HTCAP_SMPS_OFF: default: /* disable on rx of reserved value */ ni->ni_flags &= ~IEEE80211_NODE_MIMO_PS; ni->ni_flags &= ~IEEE80211_NODE_MIMO_RTS; break; } return (oflags ^ ni->ni_flags); } /* * Update short GI state according to received htcap * and local settings. */ static __inline void htcap_update_shortgi(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; ni->ni_flags &= ~(IEEE80211_NODE_SGI20|IEEE80211_NODE_SGI40); if ((ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20) && (vap->iv_flags_ht & IEEE80211_FHT_SHORTGI20)) ni->ni_flags |= IEEE80211_NODE_SGI20; if ((ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40) && (vap->iv_flags_ht & IEEE80211_FHT_SHORTGI40)) ni->ni_flags |= IEEE80211_NODE_SGI40; } /* * Parse and update HT-related state extracted from * the HT cap and info ie's. */ int ieee80211_ht_updateparams(struct ieee80211_node *ni, const uint8_t *htcapie, const uint8_t *htinfoie) { struct ieee80211vap *vap = ni->ni_vap; const struct ieee80211_ie_htinfo *htinfo; int htflags; int ret = 0; ieee80211_parse_htcap(ni, htcapie); if (vap->iv_htcaps & IEEE80211_HTCAP_SMPS) htcap_update_mimo_ps(ni); htcap_update_shortgi(ni); if (htinfoie[0] == IEEE80211_ELEMID_VENDOR) htinfoie += 4; htinfo = (const struct ieee80211_ie_htinfo *) htinfoie; htinfo_parse(ni, htinfo); htflags = (vap->iv_flags_ht & IEEE80211_FHT_HT) ? IEEE80211_CHAN_HT20 : 0; /* NB: honor operating mode constraint */ if ((htinfo->hi_byte1 & IEEE80211_HTINFO_TXWIDTH_2040) && (vap->iv_flags_ht & IEEE80211_FHT_USEHT40)) { if (ni->ni_ht2ndchan == IEEE80211_HTINFO_2NDCHAN_ABOVE) htflags = IEEE80211_CHAN_HT40U; else if (ni->ni_ht2ndchan == IEEE80211_HTINFO_2NDCHAN_BELOW) htflags = IEEE80211_CHAN_HT40D; } if (htinfo_update_chw(ni, htflags)) ret = 1; if ((htinfo->hi_byte1 & IEEE80211_HTINFO_RIFSMODE_PERM) && (vap->iv_flags_ht & IEEE80211_FHT_RIFS)) ni->ni_flags |= IEEE80211_NODE_RIFS; else ni->ni_flags &= ~IEEE80211_NODE_RIFS; return (ret); } /* * Parse and update HT-related state extracted from the HT cap ie * for a station joining an HT BSS. */ void ieee80211_ht_updatehtcap(struct ieee80211_node *ni, const uint8_t *htcapie) { struct ieee80211vap *vap = ni->ni_vap; int htflags; ieee80211_parse_htcap(ni, htcapie); if (vap->iv_htcaps & IEEE80211_HTCAP_SMPS) htcap_update_mimo_ps(ni); htcap_update_shortgi(ni); /* NB: honor operating mode constraint */ /* XXX 40 MHz intolerant */ htflags = (vap->iv_flags_ht & IEEE80211_FHT_HT) ? IEEE80211_CHAN_HT20 : 0; if ((ni->ni_htcap & IEEE80211_HTCAP_CHWIDTH40) && (vap->iv_flags_ht & IEEE80211_FHT_USEHT40)) { if (IEEE80211_IS_CHAN_HT40U(vap->iv_bss->ni_chan)) htflags = IEEE80211_CHAN_HT40U; else if (IEEE80211_IS_CHAN_HT40D(vap->iv_bss->ni_chan)) htflags = IEEE80211_CHAN_HT40D; } (void) htinfo_update_chw(ni, htflags); } /* * Install received HT rate set by parsing the HT cap ie. */ int ieee80211_setup_htrates(struct ieee80211_node *ni, const uint8_t *ie, int flags) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; const struct ieee80211_ie_htcap *htcap; struct ieee80211_htrateset *rs; int i, maxequalmcs, maxunequalmcs; maxequalmcs = ic->ic_txstream * 8 - 1; if (ic->ic_htcaps & IEEE80211_HTC_TXUNEQUAL) { if (ic->ic_txstream >= 2) maxunequalmcs = 38; if (ic->ic_txstream >= 3) maxunequalmcs = 52; if (ic->ic_txstream >= 4) maxunequalmcs = 76; } else maxunequalmcs = 0; rs = &ni->ni_htrates; memset(rs, 0, sizeof(*rs)); if (ie != NULL) { if (ie[0] == IEEE80211_ELEMID_VENDOR) ie += 4; htcap = (const struct ieee80211_ie_htcap *) ie; for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++) { if (isclr(htcap->hc_mcsset, i)) continue; if (rs->rs_nrates == IEEE80211_HTRATE_MAXSIZE) { IEEE80211_NOTE(vap, IEEE80211_MSG_XRATE | IEEE80211_MSG_11N, ni, "WARNING, HT rate set too large; only " "using %u rates", IEEE80211_HTRATE_MAXSIZE); vap->iv_stats.is_rx_rstoobig++; break; } if (i <= 31 && i > maxequalmcs) continue; if (i == 32 && (ic->ic_htcaps & IEEE80211_HTC_TXMCS32) == 0) continue; if (i > 32 && i > maxunequalmcs) continue; rs->rs_rates[rs->rs_nrates++] = i; } } return ieee80211_fix_rate(ni, (struct ieee80211_rateset *) rs, flags); } /* * Mark rates in a node's HT rate set as basic according * to the information in the supplied HT info ie. */ void ieee80211_setup_basic_htrates(struct ieee80211_node *ni, const uint8_t *ie) { const struct ieee80211_ie_htinfo *htinfo; struct ieee80211_htrateset *rs; int i, j; if (ie[0] == IEEE80211_ELEMID_VENDOR) ie += 4; htinfo = (const struct ieee80211_ie_htinfo *) ie; rs = &ni->ni_htrates; if (rs->rs_nrates == 0) { IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_XRATE | IEEE80211_MSG_11N, ni, "%s", "WARNING, empty HT rate set"); return; } for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++) { if (isclr(htinfo->hi_basicmcsset, i)) continue; for (j = 0; j < rs->rs_nrates; j++) if ((rs->rs_rates[j] & IEEE80211_RATE_VAL) == i) rs->rs_rates[j] |= IEEE80211_RATE_BASIC; } } static void ampdu_tx_setup(struct ieee80211_tx_ampdu *tap) { callout_init(&tap->txa_timer, 1); tap->txa_flags |= IEEE80211_AGGR_SETUP; tap->txa_lastsample = ticks; } static void ampdu_tx_stop(struct ieee80211_tx_ampdu *tap) { struct ieee80211_node *ni = tap->txa_ni; struct ieee80211com *ic = ni->ni_ic; IEEE80211_NOTE(tap->txa_ni->ni_vap, IEEE80211_MSG_11N, tap->txa_ni, "%s: called", __func__); KASSERT(tap->txa_flags & IEEE80211_AGGR_SETUP, ("txa_flags 0x%x tid %d ac %d", tap->txa_flags, tap->txa_tid, TID_TO_WME_AC(tap->txa_tid))); /* * Stop BA stream if setup so driver has a chance * to reclaim any resources it might have allocated. */ ic->ic_addba_stop(ni, tap); /* * Stop any pending BAR transmit. */ bar_stop_timer(tap); /* * Reset packet estimate. */ tap->txa_lastsample = ticks; tap->txa_avgpps = 0; /* NB: clearing NAK means we may re-send ADDBA */ tap->txa_flags &= ~(IEEE80211_AGGR_SETUP | IEEE80211_AGGR_NAK); } /* * ADDBA response timeout. * * If software aggregation and per-TID queue management was done here, * that queue would be unpaused after the ADDBA timeout occurs. */ static void addba_timeout(void *arg) { struct ieee80211_tx_ampdu *tap = arg; struct ieee80211_node *ni = tap->txa_ni; struct ieee80211com *ic = ni->ni_ic; /* XXX ? */ tap->txa_flags &= ~IEEE80211_AGGR_XCHGPEND; tap->txa_attempts++; ic->ic_addba_response_timeout(ni, tap); } static void addba_start_timeout(struct ieee80211_tx_ampdu *tap) { /* XXX use CALLOUT_PENDING instead? */ callout_reset(&tap->txa_timer, ieee80211_addba_timeout, addba_timeout, tap); tap->txa_flags |= IEEE80211_AGGR_XCHGPEND; tap->txa_nextrequest = ticks + ieee80211_addba_timeout; } static void addba_stop_timeout(struct ieee80211_tx_ampdu *tap) { /* XXX use CALLOUT_PENDING instead? */ if (tap->txa_flags & IEEE80211_AGGR_XCHGPEND) { callout_stop(&tap->txa_timer); tap->txa_flags &= ~IEEE80211_AGGR_XCHGPEND; } } static void null_addba_response_timeout(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) { } /* * Default method for requesting A-MPDU tx aggregation. * We setup the specified state block and start a timer * to wait for an ADDBA response frame. */ static int ieee80211_addba_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int dialogtoken, int baparamset, int batimeout) { int bufsiz; /* XXX locking */ tap->txa_token = dialogtoken; tap->txa_flags |= IEEE80211_AGGR_IMMEDIATE; bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ); tap->txa_wnd = (bufsiz == 0) ? IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX); addba_start_timeout(tap); return 1; } /* * Default method for processing an A-MPDU tx aggregation * response. We shutdown any pending timer and update the * state block according to the reply. */ static int ieee80211_addba_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int status, int baparamset, int batimeout) { int bufsiz, tid; /* XXX locking */ addba_stop_timeout(tap); if (status == IEEE80211_STATUS_SUCCESS) { bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ); /* XXX override our request? */ tap->txa_wnd = (bufsiz == 0) ? IEEE80211_AGGR_BAWMAX : min(bufsiz, IEEE80211_AGGR_BAWMAX); /* XXX AC/TID */ tid = MS(baparamset, IEEE80211_BAPS_TID); tap->txa_flags |= IEEE80211_AGGR_RUNNING; tap->txa_attempts = 0; } else { /* mark tid so we don't try again */ tap->txa_flags |= IEEE80211_AGGR_NAK; } return 1; } /* * Default method for stopping A-MPDU tx aggregation. * Any timer is cleared and we drain any pending frames. */ static void ieee80211_addba_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) { /* XXX locking */ addba_stop_timeout(tap); if (tap->txa_flags & IEEE80211_AGGR_RUNNING) { /* XXX clear aggregation queue */ tap->txa_flags &= ~IEEE80211_AGGR_RUNNING; } tap->txa_attempts = 0; } /* * Process a received action frame using the default aggregation * policy. We intercept ADDBA-related frames and use them to * update our aggregation state. All other frames are passed up * for processing by ieee80211_recv_action. */ static int ht_recv_action_ba_addba_request(struct ieee80211_node *ni, const struct ieee80211_frame *wh, const uint8_t *frm, const uint8_t *efrm) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_rx_ampdu *rap; uint8_t dialogtoken; uint16_t baparamset, batimeout, baseqctl; uint16_t args[5]; int tid; dialogtoken = frm[2]; baparamset = LE_READ_2(frm+3); batimeout = LE_READ_2(frm+5); baseqctl = LE_READ_2(frm+7); tid = MS(baparamset, IEEE80211_BAPS_TID); IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "recv ADDBA request: dialogtoken %u baparamset 0x%x " "(tid %d bufsiz %d) batimeout %d baseqctl %d:%d", dialogtoken, baparamset, tid, MS(baparamset, IEEE80211_BAPS_BUFSIZ), batimeout, MS(baseqctl, IEEE80211_BASEQ_START), MS(baseqctl, IEEE80211_BASEQ_FRAG)); rap = &ni->ni_rx_ampdu[tid]; /* Send ADDBA response */ args[0] = dialogtoken; /* * NB: We ack only if the sta associated with HT and * the ap is configured to do AMPDU rx (the latter * violates the 11n spec and is mostly for testing). */ if ((ni->ni_flags & IEEE80211_NODE_AMPDU_RX) && (vap->iv_flags_ht & IEEE80211_FHT_AMPDU_RX)) { /* XXX handle ampdu_rx_start failure */ ic->ic_ampdu_rx_start(ni, rap, baparamset, batimeout, baseqctl); args[1] = IEEE80211_STATUS_SUCCESS; } else { IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "reject ADDBA request: %s", ni->ni_flags & IEEE80211_NODE_AMPDU_RX ? "administratively disabled" : "not negotiated for station"); vap->iv_stats.is_addba_reject++; args[1] = IEEE80211_STATUS_UNSPECIFIED; } /* XXX honor rap flags? */ args[2] = IEEE80211_BAPS_POLICY_IMMEDIATE | SM(tid, IEEE80211_BAPS_TID) | SM(rap->rxa_wnd, IEEE80211_BAPS_BUFSIZ) ; args[3] = 0; args[4] = 0; ic->ic_send_action(ni, IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_ADDBA_RESPONSE, args); return 0; } static int ht_recv_action_ba_addba_response(struct ieee80211_node *ni, const struct ieee80211_frame *wh, const uint8_t *frm, const uint8_t *efrm) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_tx_ampdu *tap; uint8_t dialogtoken, policy; uint16_t baparamset, batimeout, code; int tid, bufsiz; dialogtoken = frm[2]; code = LE_READ_2(frm+3); baparamset = LE_READ_2(frm+5); tid = MS(baparamset, IEEE80211_BAPS_TID); bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ); policy = MS(baparamset, IEEE80211_BAPS_POLICY); batimeout = LE_READ_2(frm+7); tap = &ni->ni_tx_ampdu[tid]; if ((tap->txa_flags & IEEE80211_AGGR_XCHGPEND) == 0) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni->ni_macaddr, "ADDBA response", "no pending ADDBA, tid %d dialogtoken %u " "code %d", tid, dialogtoken, code); vap->iv_stats.is_addba_norequest++; return 0; } if (dialogtoken != tap->txa_token) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni->ni_macaddr, "ADDBA response", "dialogtoken mismatch: waiting for %d, " "received %d, tid %d code %d", tap->txa_token, dialogtoken, tid, code); vap->iv_stats.is_addba_badtoken++; return 0; } /* NB: assumes IEEE80211_AGGR_IMMEDIATE is 1 */ if (policy != (tap->txa_flags & IEEE80211_AGGR_IMMEDIATE)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni->ni_macaddr, "ADDBA response", "policy mismatch: expecting %s, " "received %s, tid %d code %d", tap->txa_flags & IEEE80211_AGGR_IMMEDIATE, policy, tid, code); vap->iv_stats.is_addba_badpolicy++; return 0; } #if 0 /* XXX we take MIN in ieee80211_addba_response */ if (bufsiz > IEEE80211_AGGR_BAWMAX) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni->ni_macaddr, "ADDBA response", "BA window too large: max %d, " "received %d, tid %d code %d", bufsiz, IEEE80211_AGGR_BAWMAX, tid, code); vap->iv_stats.is_addba_badbawinsize++; return 0; } #endif IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "recv ADDBA response: dialogtoken %u code %d " "baparamset 0x%x (tid %d bufsiz %d) batimeout %d", dialogtoken, code, baparamset, tid, bufsiz, batimeout); ic->ic_addba_response(ni, tap, code, baparamset, batimeout); return 0; } static int ht_recv_action_ba_delba(struct ieee80211_node *ni, const struct ieee80211_frame *wh, const uint8_t *frm, const uint8_t *efrm) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211_rx_ampdu *rap; struct ieee80211_tx_ampdu *tap; uint16_t baparamset, code; int tid; baparamset = LE_READ_2(frm+2); code = LE_READ_2(frm+4); tid = MS(baparamset, IEEE80211_DELBAPS_TID); IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "recv DELBA: baparamset 0x%x (tid %d initiator %d) " "code %d", baparamset, tid, MS(baparamset, IEEE80211_DELBAPS_INIT), code); if ((baparamset & IEEE80211_DELBAPS_INIT) == 0) { tap = &ni->ni_tx_ampdu[tid]; ic->ic_addba_stop(ni, tap); } else { rap = &ni->ni_rx_ampdu[tid]; ic->ic_ampdu_rx_stop(ni, rap); } return 0; } static int ht_recv_action_ht_txchwidth(struct ieee80211_node *ni, const struct ieee80211_frame *wh, const uint8_t *frm, const uint8_t *efrm) { int chw; chw = (frm[2] == IEEE80211_A_HT_TXCHWIDTH_2040) ? 40 : 20; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "%s: HT txchwidth, width %d%s", __func__, chw, ni->ni_chw != chw ? "*" : ""); if (chw != ni->ni_chw) { ni->ni_chw = chw; /* XXX notify on change */ } return 0; } static int ht_recv_action_ht_mimopwrsave(struct ieee80211_node *ni, const struct ieee80211_frame *wh, const uint8_t *frm, const uint8_t *efrm) { const struct ieee80211_action_ht_mimopowersave *mps = (const struct ieee80211_action_ht_mimopowersave *) frm; /* XXX check iv_htcaps */ if (mps->am_control & IEEE80211_A_HT_MIMOPWRSAVE_ENA) ni->ni_flags |= IEEE80211_NODE_MIMO_PS; else ni->ni_flags &= ~IEEE80211_NODE_MIMO_PS; if (mps->am_control & IEEE80211_A_HT_MIMOPWRSAVE_MODE) ni->ni_flags |= IEEE80211_NODE_MIMO_RTS; else ni->ni_flags &= ~IEEE80211_NODE_MIMO_RTS; /* XXX notify on change */ IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "%s: HT MIMO PS (%s%s)", __func__, (ni->ni_flags & IEEE80211_NODE_MIMO_PS) ? "on" : "off", (ni->ni_flags & IEEE80211_NODE_MIMO_RTS) ? "+rts" : "" ); return 0; } /* * Transmit processing. */ /* * Check if A-MPDU should be requested/enabled for a stream. * We require a traffic rate above a per-AC threshold and we * also handle backoff from previous failed attempts. * * Drivers may override this method to bring in information * such as link state conditions in making the decision. */ static int ieee80211_ampdu_enable(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) { struct ieee80211vap *vap = ni->ni_vap; if (tap->txa_avgpps < vap->iv_ampdu_mintraffic[TID_TO_WME_AC(tap->txa_tid)]) return 0; /* XXX check rssi? */ if (tap->txa_attempts >= ieee80211_addba_maxtries && ticks < tap->txa_nextrequest) { /* * Don't retry too often; txa_nextrequest is set * to the minimum interval we'll retry after * ieee80211_addba_maxtries failed attempts are made. */ return 0; } IEEE80211_NOTE(vap, IEEE80211_MSG_11N, ni, "enable AMPDU on tid %d (%s), avgpps %d pkts %d", tap->txa_tid, ieee80211_wme_acnames[TID_TO_WME_AC(tap->txa_tid)], tap->txa_avgpps, tap->txa_pkts); return 1; } /* * Request A-MPDU tx aggregation. Setup local state and * issue an ADDBA request. BA use will only happen after * the other end replies with ADDBA response. */ int ieee80211_ampdu_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) { struct ieee80211com *ic = ni->ni_ic; uint16_t args[5]; int tid, dialogtoken; static int tokens = 0; /* XXX */ /* XXX locking */ if ((tap->txa_flags & IEEE80211_AGGR_SETUP) == 0) { /* do deferred setup of state */ ampdu_tx_setup(tap); } /* XXX hack for not doing proper locking */ tap->txa_flags &= ~IEEE80211_AGGR_NAK; dialogtoken = (tokens+1) % 63; /* XXX */ tid = tap->txa_tid; tap->txa_start = ni->ni_txseqs[tid]; args[0] = dialogtoken; args[1] = 0; /* NB: status code not used */ args[2] = IEEE80211_BAPS_POLICY_IMMEDIATE | SM(tid, IEEE80211_BAPS_TID) | SM(IEEE80211_AGGR_BAWMAX, IEEE80211_BAPS_BUFSIZ) ; args[3] = 0; /* batimeout */ /* NB: do first so there's no race against reply */ if (!ic->ic_addba_request(ni, tap, dialogtoken, args[2], args[3])) { /* unable to setup state, don't make request */ IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "%s: could not setup BA stream for TID %d AC %d", __func__, tap->txa_tid, TID_TO_WME_AC(tap->txa_tid)); /* defer next try so we don't slam the driver with requests */ tap->txa_attempts = ieee80211_addba_maxtries; /* NB: check in case driver wants to override */ if (tap->txa_nextrequest <= ticks) tap->txa_nextrequest = ticks + ieee80211_addba_backoff; return 0; } tokens = dialogtoken; /* allocate token */ /* NB: after calling ic_addba_request so driver can set txa_start */ args[4] = SM(tap->txa_start, IEEE80211_BASEQ_START) | SM(0, IEEE80211_BASEQ_FRAG) ; return ic->ic_send_action(ni, IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_ADDBA_REQUEST, args); } /* * Terminate an AMPDU tx stream. State is reclaimed * and the peer notified with a DelBA Action frame. */ void ieee80211_ampdu_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int reason) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; uint16_t args[4]; /* XXX locking */ tap->txa_flags &= ~IEEE80211_AGGR_BARPEND; if (IEEE80211_AMPDU_RUNNING(tap)) { IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "%s: stop BA stream for TID %d (reason %d)", __func__, tap->txa_tid, reason); vap->iv_stats.is_ampdu_stop++; ic->ic_addba_stop(ni, tap); args[0] = tap->txa_tid; args[1] = IEEE80211_DELBAPS_INIT; args[2] = reason; /* XXX reason code */ ic->ic_send_action(ni, IEEE80211_ACTION_CAT_BA, IEEE80211_ACTION_BA_DELBA, args); } else { IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "%s: BA stream for TID %d not running (reason %d)", __func__, tap->txa_tid, reason); vap->iv_stats.is_ampdu_stop_failed++; } } /* XXX */ static void bar_start_timer(struct ieee80211_tx_ampdu *tap); static void bar_timeout(void *arg) { struct ieee80211_tx_ampdu *tap = arg; struct ieee80211_node *ni = tap->txa_ni; KASSERT((tap->txa_flags & IEEE80211_AGGR_XCHGPEND) == 0, ("bar/addba collision, flags 0x%x", tap->txa_flags)); IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "%s: tid %u flags 0x%x attempts %d", __func__, tap->txa_tid, tap->txa_flags, tap->txa_attempts); /* guard against race with bar_tx_complete */ if ((tap->txa_flags & IEEE80211_AGGR_BARPEND) == 0) return; /* XXX ? */ if (tap->txa_attempts >= ieee80211_bar_maxtries) { struct ieee80211com *ic = ni->ni_ic; ni->ni_vap->iv_stats.is_ampdu_bar_tx_fail++; /* * If (at least) the last BAR TX timeout was due to * an ieee80211_send_bar() failures, then we need * to make sure we notify the driver that a BAR * TX did occur and fail. This gives the driver * a chance to undo any queue pause that may * have occured. */ ic->ic_bar_response(ni, tap, 1); ieee80211_ampdu_stop(ni, tap, IEEE80211_REASON_TIMEOUT); } else { ni->ni_vap->iv_stats.is_ampdu_bar_tx_retry++; if (ieee80211_send_bar(ni, tap, tap->txa_seqpending) != 0) { IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "%s: failed to TX, starting timer\n", __func__); /* * If ieee80211_send_bar() fails here, the * timer may have stopped and/or the pending * flag may be clear. Because of this, * fake the BARPEND and reset the timer. * A retransmission attempt will then occur * during the next timeout. */ /* XXX locking */ tap->txa_flags |= IEEE80211_AGGR_BARPEND; bar_start_timer(tap); } } } static void bar_start_timer(struct ieee80211_tx_ampdu *tap) { IEEE80211_NOTE(tap->txa_ni->ni_vap, IEEE80211_MSG_11N, tap->txa_ni, "%s: called", __func__); callout_reset(&tap->txa_timer, ieee80211_bar_timeout, bar_timeout, tap); } static void bar_stop_timer(struct ieee80211_tx_ampdu *tap) { IEEE80211_NOTE(tap->txa_ni->ni_vap, IEEE80211_MSG_11N, tap->txa_ni, "%s: called", __func__); callout_stop(&tap->txa_timer); } static void bar_tx_complete(struct ieee80211_node *ni, void *arg, int status) { struct ieee80211_tx_ampdu *tap = arg; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "%s: tid %u flags 0x%x pending %d status %d", __func__, tap->txa_tid, tap->txa_flags, callout_pending(&tap->txa_timer), status); ni->ni_vap->iv_stats.is_ampdu_bar_tx++; /* XXX locking */ if ((tap->txa_flags & IEEE80211_AGGR_BARPEND) && callout_pending(&tap->txa_timer)) { struct ieee80211com *ic = ni->ni_ic; if (status == 0) /* ACK'd */ bar_stop_timer(tap); ic->ic_bar_response(ni, tap, status); /* NB: just let timer expire so we pace requests */ } } static void ieee80211_bar_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, int status) { IEEE80211_NOTE(tap->txa_ni->ni_vap, IEEE80211_MSG_11N, tap->txa_ni, "%s: called", __func__); if (status == 0) { /* got ACK */ IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, "BAR moves BA win <%u:%u> (%u frames) txseq %u tid %u", tap->txa_start, IEEE80211_SEQ_ADD(tap->txa_start, tap->txa_wnd-1), tap->txa_qframes, tap->txa_seqpending, tap->txa_tid); /* NB: timer already stopped in bar_tx_complete */ tap->txa_start = tap->txa_seqpending; tap->txa_flags &= ~IEEE80211_AGGR_BARPEND; } } /* * Transmit a BAR frame to the specified node. The * BAR contents are drawn from the supplied aggregation * state associated with the node. * * NB: we only handle immediate ACK w/ compressed bitmap. */ int ieee80211_send_bar(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap, ieee80211_seq seq) { #define senderr(_x, _v) do { vap->iv_stats._v++; ret = _x; goto bad; } while (0) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame_bar *bar; struct mbuf *m; uint16_t barctl, barseqctl; uint8_t *frm; int tid, ret; IEEE80211_NOTE(tap->txa_ni->ni_vap, IEEE80211_MSG_11N, tap->txa_ni, "%s: called", __func__); if ((tap->txa_flags & IEEE80211_AGGR_RUNNING) == 0) { /* no ADDBA response, should not happen */ /* XXX stat+msg */ return EINVAL; } /* XXX locking */ bar_stop_timer(tap); ieee80211_ref_node(ni); m = ieee80211_getmgtframe(&frm, ic->ic_headroom, sizeof(*bar)); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); if (!ieee80211_add_callback(m, bar_tx_complete, tap)) { m_freem(m); senderr(ENOMEM, is_tx_nobuf); /* XXX */ /* NOTREACHED */ } bar = mtod(m, struct ieee80211_frame_bar *); bar->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_BAR; bar->i_fc[1] = 0; IEEE80211_ADDR_COPY(bar->i_ra, ni->ni_macaddr); IEEE80211_ADDR_COPY(bar->i_ta, vap->iv_myaddr); tid = tap->txa_tid; barctl = (tap->txa_flags & IEEE80211_AGGR_IMMEDIATE ? 0 : IEEE80211_BAR_NOACK) | IEEE80211_BAR_COMP | SM(tid, IEEE80211_BAR_TID) ; barseqctl = SM(seq, IEEE80211_BAR_SEQ_START); /* NB: known to have proper alignment */ bar->i_ctl = htole16(barctl); bar->i_seq = htole16(barseqctl); m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_bar); M_WME_SETAC(m, WME_AC_VO); IEEE80211_NODE_STAT(ni, tx_mgmt); /* XXX tx_ctl? */ /* XXX locking */ /* init/bump attempts counter */ if ((tap->txa_flags & IEEE80211_AGGR_BARPEND) == 0) tap->txa_attempts = 1; else tap->txa_attempts++; tap->txa_seqpending = seq; tap->txa_flags |= IEEE80211_AGGR_BARPEND; IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_11N, ni, "send BAR: tid %u ctl 0x%x start %u (attempt %d)", tid, barctl, seq, tap->txa_attempts); /* * ic_raw_xmit will free the node reference * regardless of queue/TX success or failure. */ IEEE80211_TX_LOCK(ic); ret = ieee80211_raw_output(vap, ni, m, NULL); IEEE80211_TX_UNLOCK(ic); if (ret != 0) { IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_11N, ni, "send BAR: failed: (ret = %d)\n", ret); /* xmit failed, clear state flag */ tap->txa_flags &= ~IEEE80211_AGGR_BARPEND; vap->iv_stats.is_ampdu_bar_tx_fail++; return ret; } /* XXX hack against tx complete happening before timer is started */ if (tap->txa_flags & IEEE80211_AGGR_BARPEND) bar_start_timer(tap); return 0; bad: IEEE80211_NOTE(tap->txa_ni->ni_vap, IEEE80211_MSG_11N, tap->txa_ni, "%s: bad! ret=%d", __func__, ret); vap->iv_stats.is_ampdu_bar_tx_fail++; ieee80211_free_node(ni); return ret; #undef senderr } static int ht_action_output(struct ieee80211_node *ni, struct mbuf *m) { struct ieee80211_bpf_params params; memset(¶ms, 0, sizeof(params)); params.ibp_pri = WME_AC_VO; params.ibp_rate0 = ni->ni_txparms->mgmtrate; /* NB: we know all frames are unicast */ params.ibp_try0 = ni->ni_txparms->maxretry; params.ibp_power = ni->ni_txpower; return ieee80211_mgmt_output(ni, m, IEEE80211_FC0_SUBTYPE_ACTION, ¶ms); } #define ADDSHORT(frm, v) do { \ frm[0] = (v) & 0xff; \ frm[1] = (v) >> 8; \ frm += 2; \ } while (0) /* * Send an action management frame. The arguments are stuff * into a frame without inspection; the caller is assumed to * prepare them carefully (e.g. based on the aggregation state). */ static int ht_send_action_ba_addba(struct ieee80211_node *ni, int category, int action, void *arg0) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; uint16_t *args = arg0; struct mbuf *m; uint8_t *frm; IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "send ADDBA %s: dialogtoken %d status %d " "baparamset 0x%x (tid %d) batimeout 0x%x baseqctl 0x%x", (action == IEEE80211_ACTION_BA_ADDBA_REQUEST) ? "request" : "response", args[0], args[1], args[2], MS(args[2], IEEE80211_BAPS_TID), args[3], args[4]); IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); ieee80211_ref_node(ni); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t) /* action+category */ /* XXX may action payload */ + sizeof(struct ieee80211_action_ba_addbaresponse) ); if (m != NULL) { *frm++ = category; *frm++ = action; *frm++ = args[0]; /* dialog token */ if (action == IEEE80211_ACTION_BA_ADDBA_RESPONSE) ADDSHORT(frm, args[1]); /* status code */ ADDSHORT(frm, args[2]); /* baparamset */ ADDSHORT(frm, args[3]); /* batimeout */ if (action == IEEE80211_ACTION_BA_ADDBA_REQUEST) ADDSHORT(frm, args[4]); /* baseqctl */ m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); return ht_action_output(ni, m); } else { vap->iv_stats.is_tx_nobuf++; ieee80211_free_node(ni); return ENOMEM; } } static int ht_send_action_ba_delba(struct ieee80211_node *ni, int category, int action, void *arg0) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; uint16_t *args = arg0; struct mbuf *m; uint16_t baparamset; uint8_t *frm; baparamset = SM(args[0], IEEE80211_DELBAPS_TID) | args[1] ; IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "send DELBA action: tid %d, initiator %d reason %d", args[0], args[1], args[2]); IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); ieee80211_ref_node(ni); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t) /* action+category */ /* XXX may action payload */ + sizeof(struct ieee80211_action_ba_addbaresponse) ); if (m != NULL) { *frm++ = category; *frm++ = action; ADDSHORT(frm, baparamset); ADDSHORT(frm, args[2]); /* reason code */ m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); return ht_action_output(ni, m); } else { vap->iv_stats.is_tx_nobuf++; ieee80211_free_node(ni); return ENOMEM; } } static int ht_send_action_ht_txchwidth(struct ieee80211_node *ni, int category, int action, void *arg0) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct mbuf *m; uint8_t *frm; IEEE80211_NOTE(vap, IEEE80211_MSG_ACTION | IEEE80211_MSG_11N, ni, "send HT txchwidth: width %d", IEEE80211_IS_CHAN_HT40(ni->ni_chan) ? 40 : 20); IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); ieee80211_ref_node(ni); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t) /* action+category */ /* XXX may action payload */ + sizeof(struct ieee80211_action_ba_addbaresponse) ); if (m != NULL) { *frm++ = category; *frm++ = action; *frm++ = IEEE80211_IS_CHAN_HT40(ni->ni_chan) ? IEEE80211_A_HT_TXCHWIDTH_2040 : IEEE80211_A_HT_TXCHWIDTH_20; m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); return ht_action_output(ni, m); } else { vap->iv_stats.is_tx_nobuf++; ieee80211_free_node(ni); return ENOMEM; } } #undef ADDSHORT /* * Construct the MCS bit mask for inclusion in an HT capabilities * information element. */ static void ieee80211_set_mcsset(struct ieee80211com *ic, uint8_t *frm) { int i; uint8_t txparams; KASSERT((ic->ic_rxstream > 0 && ic->ic_rxstream <= 4), ("ic_rxstream %d out of range", ic->ic_rxstream)); KASSERT((ic->ic_txstream > 0 && ic->ic_txstream <= 4), ("ic_txstream %d out of range", ic->ic_txstream)); for (i = 0; i < ic->ic_rxstream * 8; i++) setbit(frm, i); if ((ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) && (ic->ic_htcaps & IEEE80211_HTC_RXMCS32)) setbit(frm, 32); if (ic->ic_htcaps & IEEE80211_HTC_RXUNEQUAL) { if (ic->ic_rxstream >= 2) { for (i = 33; i <= 38; i++) setbit(frm, i); } if (ic->ic_rxstream >= 3) { for (i = 39; i <= 52; i++) setbit(frm, i); } if (ic->ic_txstream >= 4) { for (i = 53; i <= 76; i++) setbit(frm, i); } } if (ic->ic_rxstream != ic->ic_txstream) { txparams = 0x1; /* TX MCS set defined */ txparams |= 0x2; /* TX RX MCS not equal */ txparams |= (ic->ic_txstream - 1) << 2; /* num TX streams */ if (ic->ic_htcaps & IEEE80211_HTC_TXUNEQUAL) txparams |= 0x16; /* TX unequal modulation sup */ } else txparams = 0; frm[12] = txparams; } /* * Add body of an HTCAP information element. */ static uint8_t * ieee80211_add_htcap_body(uint8_t *frm, struct ieee80211_node *ni) { #define ADDSHORT(frm, v) do { \ frm[0] = (v) & 0xff; \ frm[1] = (v) >> 8; \ frm += 2; \ } while (0) struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; uint16_t caps, extcaps; int rxmax, density; /* HT capabilities */ caps = vap->iv_htcaps & 0xffff; /* * Note channel width depends on whether we are operating as * a sta or not. When operating as a sta we are generating * a request based on our desired configuration. Otherwise * we are operational and the channel attributes identify * how we've been setup (which might be different if a fixed * channel is specified). */ if (vap->iv_opmode == IEEE80211_M_STA) { /* override 20/40 use based on config */ if (vap->iv_flags_ht & IEEE80211_FHT_USEHT40) caps |= IEEE80211_HTCAP_CHWIDTH40; else caps &= ~IEEE80211_HTCAP_CHWIDTH40; /* Start by using the advertised settings */ rxmax = MS(ni->ni_htparam, IEEE80211_HTCAP_MAXRXAMPDU); density = MS(ni->ni_htparam, IEEE80211_HTCAP_MPDUDENSITY); /* Cap at VAP rxmax */ if (rxmax > vap->iv_ampdu_rxmax) rxmax = vap->iv_ampdu_rxmax; /* * If the VAP ampdu density value greater, use that. * * (Larger density value == larger minimum gap between A-MPDU * subframes.) */ if (vap->iv_ampdu_density > density) density = vap->iv_ampdu_density; /* * NB: Hardware might support HT40 on some but not all * channels. We can't determine this earlier because only * after association the channel is upgraded to HT based * on the negotiated capabilities. */ if (ni->ni_chan != IEEE80211_CHAN_ANYC && findhtchan(ic, ni->ni_chan, IEEE80211_CHAN_HT40U) == NULL && findhtchan(ic, ni->ni_chan, IEEE80211_CHAN_HT40D) == NULL) caps &= ~IEEE80211_HTCAP_CHWIDTH40; } else { /* override 20/40 use based on current channel */ if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) caps |= IEEE80211_HTCAP_CHWIDTH40; else caps &= ~IEEE80211_HTCAP_CHWIDTH40; /* XXX TODO should it start by using advertised settings? */ rxmax = vap->iv_ampdu_rxmax; density = vap->iv_ampdu_density; } /* adjust short GI based on channel and config */ if ((vap->iv_flags_ht & IEEE80211_FHT_SHORTGI20) == 0) caps &= ~IEEE80211_HTCAP_SHORTGI20; if ((vap->iv_flags_ht & IEEE80211_FHT_SHORTGI40) == 0 || (caps & IEEE80211_HTCAP_CHWIDTH40) == 0) caps &= ~IEEE80211_HTCAP_SHORTGI40; ADDSHORT(frm, caps); /* HT parameters */ *frm = SM(rxmax, IEEE80211_HTCAP_MAXRXAMPDU) | SM(density, IEEE80211_HTCAP_MPDUDENSITY) ; frm++; /* pre-zero remainder of ie */ memset(frm, 0, sizeof(struct ieee80211_ie_htcap) - __offsetof(struct ieee80211_ie_htcap, hc_mcsset)); /* supported MCS set */ /* * XXX: For sta mode the rate set should be restricted based * on the AP's capabilities, but ni_htrates isn't setup when * we're called to form an AssocReq frame so for now we're * restricted to the device capabilities. */ ieee80211_set_mcsset(ni->ni_ic, frm); frm += __offsetof(struct ieee80211_ie_htcap, hc_extcap) - __offsetof(struct ieee80211_ie_htcap, hc_mcsset); /* HT extended capabilities */ extcaps = vap->iv_htextcaps & 0xffff; ADDSHORT(frm, extcaps); frm += sizeof(struct ieee80211_ie_htcap) - __offsetof(struct ieee80211_ie_htcap, hc_txbf); return frm; #undef ADDSHORT } /* * Add 802.11n HT capabilities information element */ uint8_t * ieee80211_add_htcap(uint8_t *frm, struct ieee80211_node *ni) { frm[0] = IEEE80211_ELEMID_HTCAP; frm[1] = sizeof(struct ieee80211_ie_htcap) - 2; return ieee80211_add_htcap_body(frm + 2, ni); } /* * Add Broadcom OUI wrapped standard HTCAP ie; this is * used for compatibility w/ pre-draft implementations. */ uint8_t * ieee80211_add_htcap_vendor(uint8_t *frm, struct ieee80211_node *ni) { frm[0] = IEEE80211_ELEMID_VENDOR; frm[1] = 4 + sizeof(struct ieee80211_ie_htcap) - 2; frm[2] = (BCM_OUI >> 0) & 0xff; frm[3] = (BCM_OUI >> 8) & 0xff; frm[4] = (BCM_OUI >> 16) & 0xff; frm[5] = BCM_OUI_HTCAP; return ieee80211_add_htcap_body(frm + 6, ni); } /* * Construct the MCS bit mask of basic rates * for inclusion in an HT information element. */ static void ieee80211_set_basic_htrates(uint8_t *frm, const struct ieee80211_htrateset *rs) { int i; for (i = 0; i < rs->rs_nrates; i++) { int r = rs->rs_rates[i] & IEEE80211_RATE_VAL; if ((rs->rs_rates[i] & IEEE80211_RATE_BASIC) && r < IEEE80211_HTRATE_MAXSIZE) { /* NB: this assumes a particular implementation */ setbit(frm, r); } } } /* * Update the HTINFO ie for a beacon frame. */ void ieee80211_ht_update_beacon(struct ieee80211vap *vap, struct ieee80211_beacon_offsets *bo) { #define PROTMODE (IEEE80211_HTINFO_OPMODE|IEEE80211_HTINFO_NONHT_PRESENT) struct ieee80211_node *ni; const struct ieee80211_channel *bsschan; struct ieee80211com *ic = vap->iv_ic; struct ieee80211_ie_htinfo *ht = (struct ieee80211_ie_htinfo *) bo->bo_htinfo; ni = ieee80211_ref_node(vap->iv_bss); bsschan = ni->ni_chan; /* XXX only update on channel change */ ht->hi_ctrlchannel = ieee80211_chan2ieee(ic, bsschan); if (vap->iv_flags_ht & IEEE80211_FHT_RIFS) ht->hi_byte1 = IEEE80211_HTINFO_RIFSMODE_PERM; else ht->hi_byte1 = IEEE80211_HTINFO_RIFSMODE_PROH; if (IEEE80211_IS_CHAN_HT40U(bsschan)) ht->hi_byte1 |= IEEE80211_HTINFO_2NDCHAN_ABOVE; else if (IEEE80211_IS_CHAN_HT40D(bsschan)) ht->hi_byte1 |= IEEE80211_HTINFO_2NDCHAN_BELOW; else ht->hi_byte1 |= IEEE80211_HTINFO_2NDCHAN_NONE; if (IEEE80211_IS_CHAN_HT40(bsschan)) ht->hi_byte1 |= IEEE80211_HTINFO_TXWIDTH_2040; /* protection mode */ ht->hi_byte2 = (ht->hi_byte2 &~ PROTMODE) | ic->ic_curhtprotmode; ieee80211_free_node(ni); /* XXX propagate to vendor ie's */ #undef PROTMODE } /* * Add body of an HTINFO information element. * * NB: We don't use struct ieee80211_ie_htinfo because we can * be called to fillin both a standard ie and a compat ie that * has a vendor OUI at the front. */ static uint8_t * ieee80211_add_htinfo_body(uint8_t *frm, struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; /* pre-zero remainder of ie */ memset(frm, 0, sizeof(struct ieee80211_ie_htinfo) - 2); /* primary/control channel center */ *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan); if (vap->iv_flags_ht & IEEE80211_FHT_RIFS) frm[0] = IEEE80211_HTINFO_RIFSMODE_PERM; else frm[0] = IEEE80211_HTINFO_RIFSMODE_PROH; if (IEEE80211_IS_CHAN_HT40U(ni->ni_chan)) frm[0] |= IEEE80211_HTINFO_2NDCHAN_ABOVE; else if (IEEE80211_IS_CHAN_HT40D(ni->ni_chan)) frm[0] |= IEEE80211_HTINFO_2NDCHAN_BELOW; else frm[0] |= IEEE80211_HTINFO_2NDCHAN_NONE; if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) frm[0] |= IEEE80211_HTINFO_TXWIDTH_2040; frm[1] = ic->ic_curhtprotmode; frm += 5; /* basic MCS set */ ieee80211_set_basic_htrates(frm, &ni->ni_htrates); frm += sizeof(struct ieee80211_ie_htinfo) - __offsetof(struct ieee80211_ie_htinfo, hi_basicmcsset); return frm; } /* * Add 802.11n HT information information element. */ uint8_t * ieee80211_add_htinfo(uint8_t *frm, struct ieee80211_node *ni) { frm[0] = IEEE80211_ELEMID_HTINFO; frm[1] = sizeof(struct ieee80211_ie_htinfo) - 2; return ieee80211_add_htinfo_body(frm + 2, ni); } /* * Add Broadcom OUI wrapped standard HTINFO ie; this is * used for compatibility w/ pre-draft implementations. */ uint8_t * ieee80211_add_htinfo_vendor(uint8_t *frm, struct ieee80211_node *ni) { frm[0] = IEEE80211_ELEMID_VENDOR; frm[1] = 4 + sizeof(struct ieee80211_ie_htinfo) - 2; frm[2] = (BCM_OUI >> 0) & 0xff; frm[3] = (BCM_OUI >> 8) & 0xff; frm[4] = (BCM_OUI >> 16) & 0xff; frm[5] = BCM_OUI_HTINFO; return ieee80211_add_htinfo_body(frm + 6, ni); } Index: head/sys/net80211/ieee80211_node.c =================================================================== --- head/sys/net80211/ieee80211_node.c (revision 283528) +++ head/sys/net80211/ieee80211_node.c (revision 283529) @@ -1,2827 +1,2826 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif #ifdef IEEE80211_SUPPORT_TDMA #include #endif #include #include #include #include /* * IEEE80211_NODE_HASHSIZE must be a power of 2. */ CTASSERT((IEEE80211_NODE_HASHSIZE & (IEEE80211_NODE_HASHSIZE-1)) == 0); /* * Association id's are managed with a bit vector. */ #define IEEE80211_AID_SET(_vap, b) \ ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] |= \ (1 << (IEEE80211_AID(b) % 32))) #define IEEE80211_AID_CLR(_vap, b) \ ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] &= \ ~(1 << (IEEE80211_AID(b) % 32))) #define IEEE80211_AID_ISSET(_vap, b) \ ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] & (1 << (IEEE80211_AID(b) % 32))) #ifdef IEEE80211_DEBUG_REFCNT #define REFCNT_LOC "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line #else #define REFCNT_LOC "%s %p<%s> refcnt %d\n", __func__ #endif static int ieee80211_sta_join1(struct ieee80211_node *); static struct ieee80211_node *node_alloc(struct ieee80211vap *, const uint8_t [IEEE80211_ADDR_LEN]); static void node_cleanup(struct ieee80211_node *); static void node_free(struct ieee80211_node *); static void node_age(struct ieee80211_node *); static int8_t node_getrssi(const struct ieee80211_node *); static void node_getsignal(const struct ieee80211_node *, int8_t *, int8_t *); static void node_getmimoinfo(const struct ieee80211_node *, struct ieee80211_mimo_info *); static void _ieee80211_free_node(struct ieee80211_node *); static void node_reclaim(struct ieee80211_node_table *nt, struct ieee80211_node *ni); static void ieee80211_node_table_init(struct ieee80211com *ic, struct ieee80211_node_table *nt, const char *name, int inact, int keymaxix); static void ieee80211_node_table_reset(struct ieee80211_node_table *, struct ieee80211vap *); static void ieee80211_node_table_cleanup(struct ieee80211_node_table *nt); static void ieee80211_erp_timeout(struct ieee80211com *); MALLOC_DEFINE(M_80211_NODE, "80211node", "802.11 node state"); MALLOC_DEFINE(M_80211_NODE_IE, "80211nodeie", "802.11 node ie"); void ieee80211_node_attach(struct ieee80211com *ic) { /* XXX really want maxlen enforced per-sta */ ieee80211_ageq_init(&ic->ic_stageq, ic->ic_max_keyix * 8, "802.11 staging q"); ieee80211_node_table_init(ic, &ic->ic_sta, "station", IEEE80211_INACT_INIT, ic->ic_max_keyix); callout_init(&ic->ic_inact, 1); callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz, ieee80211_node_timeout, ic); ic->ic_node_alloc = node_alloc; ic->ic_node_free = node_free; ic->ic_node_cleanup = node_cleanup; ic->ic_node_age = node_age; ic->ic_node_drain = node_age; /* NB: same as age */ ic->ic_node_getrssi = node_getrssi; ic->ic_node_getsignal = node_getsignal; ic->ic_node_getmimoinfo = node_getmimoinfo; /* * Set flags to be propagated to all vap's; * these define default behaviour/configuration. */ ic->ic_flags_ext |= IEEE80211_FEXT_INACT; /* inactivity processing */ } void ieee80211_node_detach(struct ieee80211com *ic) { callout_drain(&ic->ic_inact); ieee80211_node_table_cleanup(&ic->ic_sta); ieee80211_ageq_cleanup(&ic->ic_stageq); } void ieee80211_node_vattach(struct ieee80211vap *vap) { /* NB: driver can override */ vap->iv_max_aid = IEEE80211_AID_DEF; /* default station inactivity timer setings */ vap->iv_inact_init = IEEE80211_INACT_INIT; vap->iv_inact_auth = IEEE80211_INACT_AUTH; vap->iv_inact_run = IEEE80211_INACT_RUN; vap->iv_inact_probe = IEEE80211_INACT_PROBE; IEEE80211_DPRINTF(vap, IEEE80211_MSG_INACT, "%s: init %u auth %u run %u probe %u\n", __func__, vap->iv_inact_init, vap->iv_inact_auth, vap->iv_inact_run, vap->iv_inact_probe); } void ieee80211_node_latevattach(struct ieee80211vap *vap) { if (vap->iv_opmode == IEEE80211_M_HOSTAP) { /* XXX should we allow max aid to be zero? */ if (vap->iv_max_aid < IEEE80211_AID_MIN) { vap->iv_max_aid = IEEE80211_AID_MIN; if_printf(vap->iv_ifp, "WARNING: max aid too small, changed to %d\n", vap->iv_max_aid); } vap->iv_aid_bitmap = (uint32_t *) malloc( howmany(vap->iv_max_aid, 32) * sizeof(uint32_t), M_80211_NODE, M_NOWAIT | M_ZERO); if (vap->iv_aid_bitmap == NULL) { /* XXX no way to recover */ printf("%s: no memory for AID bitmap, max aid %d!\n", __func__, vap->iv_max_aid); vap->iv_max_aid = 0; } } ieee80211_reset_bss(vap); vap->iv_auth = ieee80211_authenticator_get(vap->iv_bss->ni_authmode); } void ieee80211_node_vdetach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; ieee80211_node_table_reset(&ic->ic_sta, vap); if (vap->iv_bss != NULL) { ieee80211_free_node(vap->iv_bss); vap->iv_bss = NULL; } if (vap->iv_aid_bitmap != NULL) { free(vap->iv_aid_bitmap, M_80211_NODE); vap->iv_aid_bitmap = NULL; } } /* * Port authorize/unauthorize interfaces for use by an authenticator. */ void ieee80211_node_authorize(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; ni->ni_flags |= IEEE80211_NODE_AUTH; ni->ni_inact_reload = vap->iv_inact_run; ni->ni_inact = ni->ni_inact_reload; IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact_reload %u", __func__, ni->ni_inact_reload); } void ieee80211_node_unauthorize(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; ni->ni_flags &= ~IEEE80211_NODE_AUTH; ni->ni_inact_reload = vap->iv_inact_auth; if (ni->ni_inact > ni->ni_inact_reload) ni->ni_inact = ni->ni_inact_reload; IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact_reload %u inact %u", __func__, ni->ni_inact_reload, ni->ni_inact); } /* * Fix tx parameters for a node according to ``association state''. */ void ieee80211_node_setuptxparms(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; enum ieee80211_phymode mode; if (ni->ni_flags & IEEE80211_NODE_HT) { if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan)) mode = IEEE80211_MODE_11NA; else mode = IEEE80211_MODE_11NG; } else { /* legacy rate handling */ if (IEEE80211_IS_CHAN_ST(ni->ni_chan)) mode = IEEE80211_MODE_STURBO_A; else if (IEEE80211_IS_CHAN_HALF(ni->ni_chan)) mode = IEEE80211_MODE_HALF; else if (IEEE80211_IS_CHAN_QUARTER(ni->ni_chan)) mode = IEEE80211_MODE_QUARTER; /* NB: 108A should be handled as 11a */ else if (IEEE80211_IS_CHAN_A(ni->ni_chan)) mode = IEEE80211_MODE_11A; else if (IEEE80211_IS_CHAN_108G(ni->ni_chan) || (ni->ni_flags & IEEE80211_NODE_ERP)) mode = IEEE80211_MODE_11G; else mode = IEEE80211_MODE_11B; } ni->ni_txparms = &vap->iv_txparms[mode]; } /* * Set/change the channel. The rate set is also updated as * to insure a consistent view by drivers. * XXX should be private but hostap needs it to deal with CSA */ void ieee80211_node_set_chan(struct ieee80211_node *ni, struct ieee80211_channel *chan) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; enum ieee80211_phymode mode; KASSERT(chan != IEEE80211_CHAN_ANYC, ("no channel")); ni->ni_chan = chan; mode = ieee80211_chan2mode(chan); if (IEEE80211_IS_CHAN_HT(chan)) { /* * We must install the legacy rate est in ni_rates and the * HT rate set in ni_htrates. */ ni->ni_htrates = *ieee80211_get_suphtrates(ic, chan); /* * Setup bss tx parameters based on operating mode. We * use legacy rates when operating in a mixed HT+non-HT bss * and non-ERP rates in 11g for mixed ERP+non-ERP bss. */ if (mode == IEEE80211_MODE_11NA && (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0) mode = IEEE80211_MODE_11A; else if (mode == IEEE80211_MODE_11NG && (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0) mode = IEEE80211_MODE_11G; if (mode == IEEE80211_MODE_11G && (vap->iv_flags & IEEE80211_F_PUREG) == 0) mode = IEEE80211_MODE_11B; } ni->ni_txparms = &vap->iv_txparms[mode]; ni->ni_rates = *ieee80211_get_suprates(ic, chan); } static __inline void copy_bss(struct ieee80211_node *nbss, const struct ieee80211_node *obss) { /* propagate useful state */ nbss->ni_authmode = obss->ni_authmode; nbss->ni_txpower = obss->ni_txpower; nbss->ni_vlan = obss->ni_vlan; /* XXX statistics? */ /* XXX legacy WDS bssid? */ } void ieee80211_create_ibss(struct ieee80211vap* vap, struct ieee80211_channel *chan) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: creating %s on channel %u\n", __func__, ieee80211_opmode_name[vap->iv_opmode], ieee80211_chan2ieee(ic, chan)); ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr); if (ni == NULL) { /* XXX recovery? */ return; } IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr); ni->ni_esslen = vap->iv_des_ssid[0].len; memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen); if (vap->iv_bss != NULL) copy_bss(ni, vap->iv_bss); ni->ni_intval = ic->ic_bintval; if (vap->iv_flags & IEEE80211_F_PRIVACY) ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY; if (ic->ic_phytype == IEEE80211_T_FH) { ni->ni_fhdwell = 200; /* XXX */ ni->ni_fhindex = 1; } if (vap->iv_opmode == IEEE80211_M_IBSS) { vap->iv_flags |= IEEE80211_F_SIBSS; ni->ni_capinfo |= IEEE80211_CAPINFO_IBSS; /* XXX */ if (vap->iv_flags & IEEE80211_F_DESBSSID) IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid); else { get_random_bytes(ni->ni_bssid, IEEE80211_ADDR_LEN); /* clear group bit, add local bit */ ni->ni_bssid[0] = (ni->ni_bssid[0] &~ 0x01) | 0x02; } } else if (vap->iv_opmode == IEEE80211_M_AHDEMO) { if (vap->iv_flags & IEEE80211_F_DESBSSID) IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid); else #ifdef IEEE80211_SUPPORT_TDMA if ((vap->iv_caps & IEEE80211_C_TDMA) == 0) #endif memset(ni->ni_bssid, 0, IEEE80211_ADDR_LEN); #ifdef IEEE80211_SUPPORT_MESH } else if (vap->iv_opmode == IEEE80211_M_MBSS) { ni->ni_meshidlen = vap->iv_mesh->ms_idlen; memcpy(ni->ni_meshid, vap->iv_mesh->ms_id, ni->ni_meshidlen); #endif } /* * Fix the channel and related attributes. */ /* clear DFS CAC state on previous channel */ if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && ic->ic_bsschan->ic_freq != chan->ic_freq && IEEE80211_IS_CHAN_CACDONE(ic->ic_bsschan)) ieee80211_dfs_cac_clear(ic, ic->ic_bsschan); ic->ic_bsschan = chan; ieee80211_node_set_chan(ni, chan); ic->ic_curmode = ieee80211_chan2mode(chan); /* * Do mode-specific setup. */ if (IEEE80211_IS_CHAN_FULL(chan)) { if (IEEE80211_IS_CHAN_ANYG(chan)) { /* * Use a mixed 11b/11g basic rate set. */ ieee80211_setbasicrates(&ni->ni_rates, IEEE80211_MODE_11G); if (vap->iv_flags & IEEE80211_F_PUREG) { /* * Also mark OFDM rates basic so 11b * stations do not join (WiFi compliance). */ ieee80211_addbasicrates(&ni->ni_rates, IEEE80211_MODE_11A); } } else if (IEEE80211_IS_CHAN_B(chan)) { /* * Force pure 11b rate set. */ ieee80211_setbasicrates(&ni->ni_rates, IEEE80211_MODE_11B); } } (void) ieee80211_sta_join1(ieee80211_ref_node(ni)); } /* * Reset bss state on transition to the INIT state. * Clear any stations from the table (they have been * deauth'd) and reset the bss node (clears key, rate * etc. state). */ void ieee80211_reset_bss(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni, *obss; ieee80211_node_table_reset(&ic->ic_sta, vap); /* XXX multi-bss: wrong */ ieee80211_reset_erp(ic); ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr); KASSERT(ni != NULL, ("unable to setup initial BSS node")); obss = vap->iv_bss; vap->iv_bss = ieee80211_ref_node(ni); if (obss != NULL) { copy_bss(ni, obss); ni->ni_intval = ic->ic_bintval; ieee80211_free_node(obss); } else IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr); } static int match_ssid(const struct ieee80211_node *ni, int nssid, const struct ieee80211_scan_ssid ssids[]) { int i; for (i = 0; i < nssid; i++) { if (ni->ni_esslen == ssids[i].len && memcmp(ni->ni_essid, ssids[i].ssid, ni->ni_esslen) == 0) return 1; } return 0; } /* * Test a node for suitability/compatibility. */ static int check_bss(struct ieee80211vap *vap, struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; uint8_t rate; if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan))) return 0; if (vap->iv_opmode == IEEE80211_M_IBSS) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) return 0; } else { if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0) return 0; } if (vap->iv_flags & IEEE80211_F_PRIVACY) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0) return 0; } else { /* XXX does this mean privacy is supported or required? */ if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) return 0; } rate = ieee80211_fix_rate(ni, &ni->ni_rates, IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE); if (rate & IEEE80211_RATE_BASIC) return 0; if (vap->iv_des_nssid != 0 && !match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid)) return 0; if ((vap->iv_flags & IEEE80211_F_DESBSSID) && !IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid)) return 0; return 1; } #ifdef IEEE80211_DEBUG /* * Display node suitability/compatibility. */ static void check_bss_debug(struct ieee80211vap *vap, struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; uint8_t rate; int fail; fail = 0; if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan))) fail |= 0x01; if (vap->iv_opmode == IEEE80211_M_IBSS) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) fail |= 0x02; } else { if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0) fail |= 0x02; } if (vap->iv_flags & IEEE80211_F_PRIVACY) { if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0) fail |= 0x04; } else { /* XXX does this mean privacy is supported or required? */ if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) fail |= 0x04; } rate = ieee80211_fix_rate(ni, &ni->ni_rates, IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE); if (rate & IEEE80211_RATE_BASIC) fail |= 0x08; if (vap->iv_des_nssid != 0 && !match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid)) fail |= 0x10; if ((vap->iv_flags & IEEE80211_F_DESBSSID) && !IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid)) fail |= 0x20; printf(" %c %s", fail ? '-' : '+', ether_sprintf(ni->ni_macaddr)); printf(" %s%c", ether_sprintf(ni->ni_bssid), fail & 0x20 ? '!' : ' '); printf(" %3d%c", ieee80211_chan2ieee(ic, ni->ni_chan), fail & 0x01 ? '!' : ' '); printf(" %2dM%c", (rate & IEEE80211_RATE_VAL) / 2, fail & 0x08 ? '!' : ' '); printf(" %4s%c", (ni->ni_capinfo & IEEE80211_CAPINFO_ESS) ? "ess" : (ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) ? "ibss" : "????", fail & 0x02 ? '!' : ' '); printf(" %3s%c ", (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) ? "wep" : "no", fail & 0x04 ? '!' : ' '); ieee80211_print_essid(ni->ni_essid, ni->ni_esslen); printf("%s\n", fail & 0x10 ? "!" : ""); } #endif /* IEEE80211_DEBUG */ /* * Handle 802.11 ad hoc network merge. The * convention, set by the Wireless Ethernet Compatibility Alliance * (WECA), is that an 802.11 station will change its BSSID to match * the "oldest" 802.11 ad hoc network, on the same channel, that * has the station's desired SSID. The "oldest" 802.11 network * sends beacons with the greatest TSF timestamp. * * The caller is assumed to validate TSF's before attempting a merge. * * Return !0 if the BSSID changed, 0 otherwise. */ int ieee80211_ibss_merge(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; #ifdef IEEE80211_DEBUG struct ieee80211com *ic = ni->ni_ic; #endif if (ni == vap->iv_bss || IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) { /* unchanged, nothing to do */ return 0; } if (!check_bss(vap, ni)) { /* capabilities mismatch */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, "%s: merge failed, capabilities mismatch\n", __func__); #ifdef IEEE80211_DEBUG if (ieee80211_msg_assoc(vap)) check_bss_debug(vap, ni); #endif vap->iv_stats.is_ibss_capmismatch++; return 0; } IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, "%s: new bssid %s: %s preamble, %s slot time%s\n", __func__, ether_sprintf(ni->ni_bssid), ic->ic_flags&IEEE80211_F_SHPREAMBLE ? "short" : "long", ic->ic_flags&IEEE80211_F_SHSLOT ? "short" : "long", ic->ic_flags&IEEE80211_F_USEPROT ? ", protection" : "" ); return ieee80211_sta_join1(ieee80211_ref_node(ni)); } /* * Calculate HT channel promotion flags for all vaps. * This assumes ni_chan have been setup for each vap. */ static int gethtadjustflags(struct ieee80211com *ic) { struct ieee80211vap *vap; int flags; flags = 0; /* XXX locking */ TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { if (vap->iv_state < IEEE80211_S_RUN) continue; switch (vap->iv_opmode) { case IEEE80211_M_WDS: case IEEE80211_M_STA: case IEEE80211_M_AHDEMO: case IEEE80211_M_HOSTAP: case IEEE80211_M_IBSS: case IEEE80211_M_MBSS: flags |= ieee80211_htchanflags(vap->iv_bss->ni_chan); break; default: break; } } return flags; } /* * Check if the current channel needs to change based on whether * any vap's are using HT20/HT40. This is used to sync the state * of ic_curchan after a channel width change on a running vap. */ void ieee80211_sync_curchan(struct ieee80211com *ic) { struct ieee80211_channel *c; c = ieee80211_ht_adjust_channel(ic, ic->ic_curchan, gethtadjustflags(ic)); if (c != ic->ic_curchan) { ic->ic_curchan = c; ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan); ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan); IEEE80211_UNLOCK(ic); ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); IEEE80211_LOCK(ic); } } /* * Setup the current channel. The request channel may be * promoted if other vap's are operating with HT20/HT40. */ void ieee80211_setupcurchan(struct ieee80211com *ic, struct ieee80211_channel *c) { if (ic->ic_htcaps & IEEE80211_HTC_HT) { int flags = gethtadjustflags(ic); /* * Check for channel promotion required to support the * set of running vap's. This assumes we are called * after ni_chan is setup for each vap. */ /* NB: this assumes IEEE80211_FHT_USEHT40 > IEEE80211_FHT_HT */ if (flags > ieee80211_htchanflags(c)) c = ieee80211_ht_adjust_channel(ic, c, flags); } ic->ic_bsschan = ic->ic_curchan = c; ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan); ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan); } /* * Change the current channel. The channel change is guaranteed to have * happened before the next state change. */ void ieee80211_setcurchan(struct ieee80211com *ic, struct ieee80211_channel *c) { ieee80211_setupcurchan(ic, c); ieee80211_runtask(ic, &ic->ic_chan_task); } void ieee80211_update_chw(struct ieee80211com *ic) { ieee80211_setupcurchan(ic, ic->ic_curchan); ieee80211_runtask(ic, &ic->ic_chw_task); } /* * Join the specified IBSS/BSS network. The node is assumed to * be passed in with a held reference. */ static int ieee80211_sta_join1(struct ieee80211_node *selbs) { struct ieee80211vap *vap = selbs->ni_vap; struct ieee80211com *ic = selbs->ni_ic; struct ieee80211_node *obss; int canreassoc; /* * Committed to selbs, setup state. */ obss = vap->iv_bss; /* * Check if old+new node have the same address in which * case we can reassociate when operating in sta mode. */ canreassoc = (obss != NULL && vap->iv_state == IEEE80211_S_RUN && IEEE80211_ADDR_EQ(obss->ni_macaddr, selbs->ni_macaddr)); vap->iv_bss = selbs; /* NB: caller assumed to bump refcnt */ if (obss != NULL) { struct ieee80211_node_table *nt = obss->ni_table; copy_bss(selbs, obss); ieee80211_node_decref(obss); /* iv_bss reference */ IEEE80211_NODE_LOCK(nt); node_reclaim(nt, obss); /* station table reference */ IEEE80211_NODE_UNLOCK(nt); obss = NULL; /* NB: guard against later use */ } /* * Delete unusable rates; we've already checked * that the negotiated rate set is acceptable. */ ieee80211_fix_rate(vap->iv_bss, &vap->iv_bss->ni_rates, IEEE80211_F_DODEL | IEEE80211_F_JOIN); ieee80211_setcurchan(ic, selbs->ni_chan); /* * Set the erp state (mostly the slot time) to deal with * the auto-select case; this should be redundant if the * mode is locked. */ ieee80211_reset_erp(ic); ieee80211_wme_initparams(vap); if (vap->iv_opmode == IEEE80211_M_STA) { if (canreassoc) { /* Reassociate */ ieee80211_new_state(vap, IEEE80211_S_ASSOC, 1); } else { /* * Act as if we received a DEAUTH frame in case we * are invoked from the RUN state. This will cause * us to try to re-authenticate if we are operating * as a station. */ ieee80211_new_state(vap, IEEE80211_S_AUTH, IEEE80211_FC0_SUBTYPE_DEAUTH); } } else ieee80211_new_state(vap, IEEE80211_S_RUN, -1); return 1; } int ieee80211_sta_join(struct ieee80211vap *vap, struct ieee80211_channel *chan, const struct ieee80211_scan_entry *se) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; ni = ieee80211_alloc_node(&ic->ic_sta, vap, se->se_macaddr); if (ni == NULL) { /* XXX msg */ return 0; } /* * Expand scan state into node's format. * XXX may not need all this stuff */ IEEE80211_ADDR_COPY(ni->ni_bssid, se->se_bssid); ni->ni_esslen = se->se_ssid[1]; memcpy(ni->ni_essid, se->se_ssid+2, ni->ni_esslen); ni->ni_tstamp.tsf = se->se_tstamp.tsf; ni->ni_intval = se->se_intval; ni->ni_capinfo = se->se_capinfo; ni->ni_chan = chan; ni->ni_timoff = se->se_timoff; ni->ni_fhdwell = se->se_fhdwell; ni->ni_fhindex = se->se_fhindex; ni->ni_erp = se->se_erp; IEEE80211_RSSI_LPF(ni->ni_avgrssi, se->se_rssi); ni->ni_noise = se->se_noise; if (vap->iv_opmode == IEEE80211_M_STA) { /* NB: only infrastructure mode requires an associd */ ni->ni_flags |= IEEE80211_NODE_ASSOCID; } if (ieee80211_ies_init(&ni->ni_ies, se->se_ies.data, se->se_ies.len)) { ieee80211_ies_expand(&ni->ni_ies); #ifdef IEEE80211_SUPPORT_SUPERG if (ni->ni_ies.ath_ie != NULL) ieee80211_parse_ath(ni, ni->ni_ies.ath_ie); #endif if (ni->ni_ies.htcap_ie != NULL) ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie); if (ni->ni_ies.htinfo_ie != NULL) ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie); #ifdef IEEE80211_SUPPORT_MESH if (ni->ni_ies.meshid_ie != NULL) ieee80211_parse_meshid(ni, ni->ni_ies.meshid_ie); #endif #ifdef IEEE80211_SUPPORT_TDMA if (ni->ni_ies.tdma_ie != NULL) ieee80211_parse_tdma(ni, ni->ni_ies.tdma_ie); #endif } vap->iv_dtim_period = se->se_dtimperiod; vap->iv_dtim_count = 0; /* NB: must be after ni_chan is setup */ ieee80211_setup_rates(ni, se->se_rates, se->se_xrates, IEEE80211_F_DOSORT); if (ieee80211_iserp_rateset(&ni->ni_rates)) ni->ni_flags |= IEEE80211_NODE_ERP; /* * Setup HT state for this node if it's available, otherwise * non-STA modes won't pick this state up. * * For IBSS and related modes that don't go through an * association request/response, the only appropriate place * to setup the HT state is here. */ if (ni->ni_ies.htinfo_ie != NULL && ni->ni_ies.htcap_ie != NULL && vap->iv_flags_ht & IEEE80211_FHT_HT) { ieee80211_ht_node_init(ni); ieee80211_ht_updateparams(ni, ni->ni_ies.htcap_ie, ni->ni_ies.htinfo_ie); ieee80211_setup_htrates(ni, ni->ni_ies.htcap_ie, IEEE80211_F_JOIN | IEEE80211_F_DOBRS); ieee80211_setup_basic_htrates(ni, ni->ni_ies.htinfo_ie); } /* XXX else check for ath FF? */ /* XXX QoS? Difficult given that WME config is specific to a master */ ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); return ieee80211_sta_join1(ieee80211_ref_node(ni)); } /* * Leave the specified IBSS/BSS network. The node is assumed to * be passed in with a held reference. */ void ieee80211_sta_leave(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; ic->ic_node_cleanup(ni); ieee80211_notify_node_leave(ni); } /* * Send a deauthenticate frame and drop the station. */ void ieee80211_node_deauth(struct ieee80211_node *ni, int reason) { /* NB: bump the refcnt to be sure temporary nodes are not reclaimed */ ieee80211_ref_node(ni); if (ni->ni_associd != 0) IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, reason); ieee80211_node_leave(ni); ieee80211_free_node(ni); } static struct ieee80211_node * node_alloc(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211_node *ni; ni = (struct ieee80211_node *) malloc(sizeof(struct ieee80211_node), M_80211_NODE, M_NOWAIT | M_ZERO); return ni; } /* * Initialize an ie blob with the specified data. If previous * data exists re-use the data block. As a side effect we clear * all references to specific ie's; the caller is required to * recalculate them. */ int ieee80211_ies_init(struct ieee80211_ies *ies, const uint8_t *data, int len) { /* NB: assumes data+len are the last fields */ memset(ies, 0, offsetof(struct ieee80211_ies, data)); if (ies->data != NULL && ies->len != len) { /* data size changed */ free(ies->data, M_80211_NODE_IE); ies->data = NULL; } if (ies->data == NULL) { ies->data = (uint8_t *) malloc(len, M_80211_NODE_IE, M_NOWAIT); if (ies->data == NULL) { ies->len = 0; /* NB: pointers have already been zero'd above */ return 0; } } memcpy(ies->data, data, len); ies->len = len; return 1; } /* * Reclaim storage for an ie blob. */ void ieee80211_ies_cleanup(struct ieee80211_ies *ies) { if (ies->data != NULL) free(ies->data, M_80211_NODE_IE); } /* * Expand an ie blob data contents and to fillin individual * ie pointers. The data blob is assumed to be well-formed; * we don't do any validity checking of ie lengths. */ void ieee80211_ies_expand(struct ieee80211_ies *ies) { uint8_t *ie; int ielen; ie = ies->data; ielen = ies->len; while (ielen > 0) { switch (ie[0]) { case IEEE80211_ELEMID_VENDOR: if (iswpaoui(ie)) ies->wpa_ie = ie; else if (iswmeoui(ie)) ies->wme_ie = ie; #ifdef IEEE80211_SUPPORT_SUPERG else if (isatherosoui(ie)) ies->ath_ie = ie; #endif #ifdef IEEE80211_SUPPORT_TDMA else if (istdmaoui(ie)) ies->tdma_ie = ie; #endif break; case IEEE80211_ELEMID_RSN: ies->rsn_ie = ie; break; case IEEE80211_ELEMID_HTCAP: ies->htcap_ie = ie; break; case IEEE80211_ELEMID_HTINFO: ies->htinfo_ie = ie; break; #ifdef IEEE80211_SUPPORT_MESH case IEEE80211_ELEMID_MESHID: ies->meshid_ie = ie; break; #endif } ielen -= 2 + ie[1]; ie += 2 + ie[1]; } } /* * Reclaim any resources in a node and reset any critical * state. Typically nodes are free'd immediately after, * but in some cases the storage may be reused so we need * to insure consistent state (should probably fix that). */ static void node_cleanup(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; int i; /* NB: preserve ni_table */ if (ni->ni_flags & IEEE80211_NODE_PWR_MGT) { if (vap->iv_opmode != IEEE80211_M_STA) vap->iv_ps_sta--; ni->ni_flags &= ~IEEE80211_NODE_PWR_MGT; IEEE80211_NOTE(vap, IEEE80211_MSG_POWER, ni, "power save mode off, %u sta's in ps mode", vap->iv_ps_sta); } /* * Cleanup any HT-related state. */ if (ni->ni_flags & IEEE80211_NODE_HT) ieee80211_ht_node_cleanup(ni); #ifdef IEEE80211_SUPPORT_SUPERG else if (ni->ni_ath_flags & IEEE80211_NODE_ATH) ieee80211_ff_node_cleanup(ni); #endif #ifdef IEEE80211_SUPPORT_MESH /* * Cleanup any mesh-related state. */ if (vap->iv_opmode == IEEE80211_M_MBSS) ieee80211_mesh_node_cleanup(ni); #endif /* * Clear any staging queue entries. */ ieee80211_ageq_drain_node(&ic->ic_stageq, ni); /* * Clear AREF flag that marks the authorization refcnt bump * has happened. This is probably not needed as the node * should always be removed from the table so not found but * do it just in case. * Likewise clear the ASSOCID flag as these flags are intended * to be managed in tandem. */ ni->ni_flags &= ~(IEEE80211_NODE_AREF | IEEE80211_NODE_ASSOCID); /* * Drain power save queue and, if needed, clear TIM. */ if (ieee80211_node_psq_drain(ni) != 0 && vap->iv_set_tim != NULL) vap->iv_set_tim(ni, 0); ni->ni_associd = 0; if (ni->ni_challenge != NULL) { free(ni->ni_challenge, M_80211_NODE); ni->ni_challenge = NULL; } /* * Preserve SSID, WPA, and WME ie's so the bss node is * reusable during a re-auth/re-assoc state transition. * If we remove these data they will not be recreated * because they come from a probe-response or beacon frame * which cannot be expected prior to the association-response. * This should not be an issue when operating in other modes * as stations leaving always go through a full state transition * which will rebuild this state. * * XXX does this leave us open to inheriting old state? */ for (i = 0; i < nitems(ni->ni_rxfrag); i++) if (ni->ni_rxfrag[i] != NULL) { m_freem(ni->ni_rxfrag[i]); ni->ni_rxfrag[i] = NULL; } /* * Must be careful here to remove any key map entry w/o a LOR. */ ieee80211_node_delucastkey(ni); } static void node_free(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; ieee80211_ratectl_node_deinit(ni); ic->ic_node_cleanup(ni); ieee80211_ies_cleanup(&ni->ni_ies); ieee80211_psq_cleanup(&ni->ni_psq); free(ni, M_80211_NODE); } static void node_age(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; IEEE80211_NODE_LOCK_ASSERT(&vap->iv_ic->ic_sta); /* * Age frames on the power save queue. */ if (ieee80211_node_psq_age(ni) != 0 && ni->ni_psq.psq_len == 0 && vap->iv_set_tim != NULL) vap->iv_set_tim(ni, 0); /* * Age out HT resources (e.g. frames on the * A-MPDU reorder queues). */ if (ni->ni_associd != 0 && (ni->ni_flags & IEEE80211_NODE_HT)) ieee80211_ht_node_age(ni); } static int8_t node_getrssi(const struct ieee80211_node *ni) { uint32_t avgrssi = ni->ni_avgrssi; int32_t rssi; if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER) return 0; rssi = IEEE80211_RSSI_GET(avgrssi); return rssi < 0 ? 0 : rssi > 127 ? 127 : rssi; } static void node_getsignal(const struct ieee80211_node *ni, int8_t *rssi, int8_t *noise) { *rssi = node_getrssi(ni); *noise = ni->ni_noise; } static void node_getmimoinfo(const struct ieee80211_node *ni, struct ieee80211_mimo_info *info) { int i; uint32_t avgrssi; int32_t rssi; bzero(info, sizeof(*info)); for (i = 0; i < ni->ni_mimo_chains; i++) { avgrssi = ni->ni_mimo_rssi_ctl[i]; if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER) { info->rssi[i] = 0; } else { rssi = IEEE80211_RSSI_GET(avgrssi); info->rssi[i] = rssi < 0 ? 0 : rssi > 127 ? 127 : rssi; } info->noise[i] = ni->ni_mimo_noise_ctl[i]; } /* XXX ext radios? */ /* XXX EVM? */ } struct ieee80211_node * ieee80211_alloc_node(struct ieee80211_node_table *nt, struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic = nt->nt_ic; struct ieee80211_node *ni; int hash; ni = ic->ic_node_alloc(vap, macaddr); if (ni == NULL) { vap->iv_stats.is_rx_nodealloc++; return NULL; } IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "%s %p<%s> in %s table\n", __func__, ni, ether_sprintf(macaddr), nt->nt_name); IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr); hash = IEEE80211_NODE_HASH(ic, macaddr); ieee80211_node_initref(ni); /* mark referenced */ ni->ni_chan = IEEE80211_CHAN_ANYC; ni->ni_authmode = IEEE80211_AUTH_OPEN; ni->ni_txpower = ic->ic_txpowlimit; /* max power */ ni->ni_txparms = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey, IEEE80211_KEYIX_NONE); ni->ni_avgrssi = IEEE80211_RSSI_DUMMY_MARKER; ni->ni_inact_reload = nt->nt_inact_init; ni->ni_inact = ni->ni_inact_reload; ni->ni_ath_defkeyix = 0x7fff; ieee80211_psq_init(&ni->ni_psq, "unknown"); #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) ieee80211_mesh_node_init(vap, ni); #endif IEEE80211_NODE_LOCK(nt); TAILQ_INSERT_TAIL(&nt->nt_node, ni, ni_list); LIST_INSERT_HEAD(&nt->nt_hash[hash], ni, ni_hash); ni->ni_table = nt; ni->ni_vap = vap; ni->ni_ic = ic; IEEE80211_NODE_UNLOCK(nt); IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact_reload %u", __func__, ni->ni_inact_reload); ieee80211_ratectl_node_init(ni); return ni; } /* * Craft a temporary node suitable for sending a management frame * to the specified station. We craft only as much state as we * need to do the work since the node will be immediately reclaimed * once the send completes. */ struct ieee80211_node * ieee80211_tmp_node(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; ni = ic->ic_node_alloc(vap, macaddr); if (ni != NULL) { struct ieee80211_node *bss = vap->iv_bss; IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "%s %p<%s>\n", __func__, ni, ether_sprintf(macaddr)); ni->ni_table = NULL; /* NB: pedantic */ ni->ni_ic = ic; /* NB: needed to set channel */ ni->ni_vap = vap; IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr); IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid); ieee80211_node_initref(ni); /* mark referenced */ /* NB: required by ieee80211_fix_rate */ ieee80211_node_set_chan(ni, bss->ni_chan); ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey, IEEE80211_KEYIX_NONE); ni->ni_txpower = bss->ni_txpower; /* XXX optimize away */ ieee80211_psq_init(&ni->ni_psq, "unknown"); ieee80211_ratectl_node_init(ni); } else { /* XXX msg */ vap->iv_stats.is_rx_nodealloc++; } return ni; } struct ieee80211_node * ieee80211_dup_bss(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; ni = ieee80211_alloc_node(&ic->ic_sta, vap, macaddr); if (ni != NULL) { struct ieee80211_node *bss = vap->iv_bss; /* * Inherit from iv_bss. */ copy_bss(ni, bss); IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid); ieee80211_node_set_chan(ni, bss->ni_chan); } return ni; } /* * Create a bss node for a legacy WDS vap. The far end does * not associate so we just create create a new node and * simulate an association. The caller is responsible for * installing the node as the bss node and handling any further * setup work like authorizing the port. */ struct ieee80211_node * ieee80211_node_create_wds(struct ieee80211vap *vap, const uint8_t bssid[IEEE80211_ADDR_LEN], struct ieee80211_channel *chan) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; /* XXX check if node already in sta table? */ ni = ieee80211_alloc_node(&ic->ic_sta, vap, bssid); if (ni != NULL) { ni->ni_wdsvap = vap; IEEE80211_ADDR_COPY(ni->ni_bssid, bssid); /* * Inherit any manually configured settings. */ copy_bss(ni, vap->iv_bss); ieee80211_node_set_chan(ni, chan); /* NB: propagate ssid so available to WPA supplicant */ ni->ni_esslen = vap->iv_des_ssid[0].len; memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen); /* NB: no associd for peer */ /* * There are no management frames to use to * discover neighbor capabilities, so blindly * propagate the local configuration. */ if (vap->iv_flags & IEEE80211_F_WME) ni->ni_flags |= IEEE80211_NODE_QOS; #ifdef IEEE80211_SUPPORT_SUPERG if (vap->iv_flags & IEEE80211_F_FF) ni->ni_flags |= IEEE80211_NODE_FF; #endif if ((ic->ic_htcaps & IEEE80211_HTC_HT) && (vap->iv_flags_ht & IEEE80211_FHT_HT)) { /* * Device is HT-capable and HT is enabled for * the vap; setup HT operation. On return * ni_chan will be adjusted to an HT channel. */ ieee80211_ht_wds_init(ni); } else { struct ieee80211_channel *c = ni->ni_chan; /* * Force a legacy channel to be used. */ c = ieee80211_find_channel(ic, c->ic_freq, c->ic_flags &~ IEEE80211_CHAN_HT); KASSERT(c != NULL, ("no legacy channel, %u/%x", ni->ni_chan->ic_freq, ni->ni_chan->ic_flags)); ni->ni_chan = c; } } return ni; } struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_node_locked_debug(struct ieee80211_node_table *nt, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) #else ieee80211_find_node_locked(struct ieee80211_node_table *nt, const uint8_t macaddr[IEEE80211_ADDR_LEN]) #endif { struct ieee80211_node *ni; int hash; IEEE80211_NODE_LOCK_ASSERT(nt); hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr); LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) { if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) { ieee80211_ref_node(ni); /* mark referenced */ #ifdef IEEE80211_DEBUG_REFCNT IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); #endif return ni; } } return NULL; } struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_node_debug(struct ieee80211_node_table *nt, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) #else ieee80211_find_node(struct ieee80211_node_table *nt, const uint8_t macaddr[IEEE80211_ADDR_LEN]) #endif { struct ieee80211_node *ni; IEEE80211_NODE_LOCK(nt); ni = ieee80211_find_node_locked(nt, macaddr); IEEE80211_NODE_UNLOCK(nt); return ni; } struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_vap_node_locked_debug(struct ieee80211_node_table *nt, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) #else ieee80211_find_vap_node_locked(struct ieee80211_node_table *nt, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) #endif { struct ieee80211_node *ni; int hash; IEEE80211_NODE_LOCK_ASSERT(nt); hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr); LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) { if (ni->ni_vap == vap && IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) { ieee80211_ref_node(ni); /* mark referenced */ #ifdef IEEE80211_DEBUG_REFCNT IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); #endif return ni; } } return NULL; } struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_vap_node_debug(struct ieee80211_node_table *nt, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) #else ieee80211_find_vap_node(struct ieee80211_node_table *nt, const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) #endif { struct ieee80211_node *ni; IEEE80211_NODE_LOCK(nt); ni = ieee80211_find_vap_node_locked(nt, vap, macaddr); IEEE80211_NODE_UNLOCK(nt); return ni; } /* * Fake up a node; this handles node discovery in adhoc mode. * Note that for the driver's benefit we we treat this like * an association so the driver has an opportunity to setup * it's private state. */ struct ieee80211_node * ieee80211_fakeup_adhoc_node(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) { struct ieee80211_node *ni; IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE | IEEE80211_MSG_ASSOC, "%s: mac<%s>\n", __func__, ether_sprintf(macaddr)); ni = ieee80211_dup_bss(vap, macaddr); if (ni != NULL) { struct ieee80211com *ic = vap->iv_ic; /* XXX no rate negotiation; just dup */ ni->ni_rates = vap->iv_bss->ni_rates; if (ieee80211_iserp_rateset(&ni->ni_rates)) ni->ni_flags |= IEEE80211_NODE_ERP; if (vap->iv_opmode == IEEE80211_M_AHDEMO) { /* * In adhoc demo mode there are no management * frames to use to discover neighbor capabilities, * so blindly propagate the local configuration * so we can do interesting things (e.g. use * WME to disable ACK's). */ if (vap->iv_flags & IEEE80211_F_WME) ni->ni_flags |= IEEE80211_NODE_QOS; #ifdef IEEE80211_SUPPORT_SUPERG if (vap->iv_flags & IEEE80211_F_FF) ni->ni_flags |= IEEE80211_NODE_FF; #endif } ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); if (ic->ic_newassoc != NULL) ic->ic_newassoc(ni, 1); /* XXX not right for 802.1x/WPA */ ieee80211_node_authorize(ni); } return ni; } void ieee80211_init_neighbor(struct ieee80211_node *ni, const struct ieee80211_frame *wh, const struct ieee80211_scanparams *sp) { int do_ht_setup = 0; ni->ni_esslen = sp->ssid[1]; memcpy(ni->ni_essid, sp->ssid + 2, sp->ssid[1]); IEEE80211_ADDR_COPY(ni->ni_bssid, wh->i_addr3); memcpy(ni->ni_tstamp.data, sp->tstamp, sizeof(ni->ni_tstamp)); ni->ni_intval = sp->bintval; ni->ni_capinfo = sp->capinfo; ni->ni_chan = ni->ni_ic->ic_curchan; ni->ni_fhdwell = sp->fhdwell; ni->ni_fhindex = sp->fhindex; ni->ni_erp = sp->erp; ni->ni_timoff = sp->timoff; #ifdef IEEE80211_SUPPORT_MESH if (ni->ni_vap->iv_opmode == IEEE80211_M_MBSS) ieee80211_mesh_init_neighbor(ni, wh, sp); #endif if (ieee80211_ies_init(&ni->ni_ies, sp->ies, sp->ies_len)) { ieee80211_ies_expand(&ni->ni_ies); if (ni->ni_ies.wme_ie != NULL) ni->ni_flags |= IEEE80211_NODE_QOS; else ni->ni_flags &= ~IEEE80211_NODE_QOS; #ifdef IEEE80211_SUPPORT_SUPERG if (ni->ni_ies.ath_ie != NULL) ieee80211_parse_ath(ni, ni->ni_ies.ath_ie); #endif if (ni->ni_ies.htcap_ie != NULL) ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie); if (ni->ni_ies.htinfo_ie != NULL) ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie); if ((ni->ni_ies.htcap_ie != NULL) && (ni->ni_ies.htinfo_ie != NULL) && (ni->ni_vap->iv_flags_ht & IEEE80211_FHT_HT)) { do_ht_setup = 1; } } /* NB: must be after ni_chan is setup */ ieee80211_setup_rates(ni, sp->rates, sp->xrates, IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE | IEEE80211_F_DONEGO | IEEE80211_F_DODEL); /* * If the neighbor is HT compatible, flip that on. */ if (do_ht_setup) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: doing HT setup\n", __func__); ieee80211_ht_node_init(ni); ieee80211_ht_updateparams(ni, ni->ni_ies.htcap_ie, ni->ni_ies.htinfo_ie); ieee80211_setup_htrates(ni, ni->ni_ies.htcap_ie, IEEE80211_F_JOIN | IEEE80211_F_DOBRS); ieee80211_setup_basic_htrates(ni, ni->ni_ies.htinfo_ie); ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); } } /* * Do node discovery in adhoc mode on receipt of a beacon * or probe response frame. Note that for the driver's * benefit we we treat this like an association so the * driver has an opportunity to setup it's private state. */ struct ieee80211_node * ieee80211_add_neighbor(struct ieee80211vap *vap, const struct ieee80211_frame *wh, const struct ieee80211_scanparams *sp) { struct ieee80211_node *ni; IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, "%s: mac<%s>\n", __func__, ether_sprintf(wh->i_addr2)); ni = ieee80211_dup_bss(vap, wh->i_addr2);/* XXX alloc_node? */ if (ni != NULL) { struct ieee80211com *ic = vap->iv_ic; ieee80211_init_neighbor(ni, wh, sp); if (ieee80211_iserp_rateset(&ni->ni_rates)) ni->ni_flags |= IEEE80211_NODE_ERP; ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); if (ic->ic_newassoc != NULL) ic->ic_newassoc(ni, 1); /* XXX not right for 802.1x/WPA */ ieee80211_node_authorize(ni); } return ni; } #define IS_PROBEREQ(wh) \ ((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK|IEEE80211_FC0_SUBTYPE_MASK)) \ == (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ)) #define IS_BCAST_PROBEREQ(wh) \ (IS_PROBEREQ(wh) && IEEE80211_IS_MULTICAST( \ ((const struct ieee80211_frame *)(wh))->i_addr3)) static __inline struct ieee80211_node * _find_rxnode(struct ieee80211_node_table *nt, const struct ieee80211_frame_min *wh) { if (IS_BCAST_PROBEREQ(wh)) return NULL; /* spam bcast probe req to all vap's */ return ieee80211_find_node_locked(nt, wh->i_addr2); } /* * Locate the node for sender, track state, and then pass the * (referenced) node up to the 802.11 layer for its use. Note * we can return NULL if the sender is not in the table. */ struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_rxnode_debug(struct ieee80211com *ic, const struct ieee80211_frame_min *wh, const char *func, int line) #else ieee80211_find_rxnode(struct ieee80211com *ic, const struct ieee80211_frame_min *wh) #endif { struct ieee80211_node_table *nt; struct ieee80211_node *ni; nt = &ic->ic_sta; IEEE80211_NODE_LOCK(nt); ni = _find_rxnode(nt, wh); IEEE80211_NODE_UNLOCK(nt); return ni; } /* * Like ieee80211_find_rxnode but use the supplied h/w * key index as a hint to locate the node in the key * mapping table. If an entry is present at the key * index we return it; otherwise do a normal lookup and * update the mapping table if the station has a unicast * key assigned to it. */ struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_rxnode_withkey_debug(struct ieee80211com *ic, const struct ieee80211_frame_min *wh, ieee80211_keyix keyix, const char *func, int line) #else ieee80211_find_rxnode_withkey(struct ieee80211com *ic, const struct ieee80211_frame_min *wh, ieee80211_keyix keyix) #endif { struct ieee80211_node_table *nt; struct ieee80211_node *ni; nt = &ic->ic_sta; IEEE80211_NODE_LOCK(nt); if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax) ni = nt->nt_keyixmap[keyix]; else ni = NULL; if (ni == NULL) { ni = _find_rxnode(nt, wh); if (ni != NULL && nt->nt_keyixmap != NULL) { /* * If the station has a unicast key cache slot * assigned update the key->node mapping table. */ keyix = ni->ni_ucastkey.wk_rxkeyix; /* XXX can keyixmap[keyix] != NULL? */ if (keyix < nt->nt_keyixmax && nt->nt_keyixmap[keyix] == NULL) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: add key map entry %p<%s> refcnt %d\n", __func__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); nt->nt_keyixmap[keyix] = ieee80211_ref_node(ni); } } } else { if (IS_BCAST_PROBEREQ(wh)) ni = NULL; /* spam bcast probe req to all vap's */ else ieee80211_ref_node(ni); } IEEE80211_NODE_UNLOCK(nt); return ni; } #undef IS_BCAST_PROBEREQ #undef IS_PROBEREQ /* * Return a reference to the appropriate node for sending * a data frame. This handles node discovery in adhoc networks. */ struct ieee80211_node * #ifdef IEEE80211_DEBUG_REFCNT ieee80211_find_txnode_debug(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *func, int line) #else ieee80211_find_txnode(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) #endif { struct ieee80211_node_table *nt = &vap->iv_ic->ic_sta; struct ieee80211_node *ni; /* * The destination address should be in the node table * unless this is a multicast/broadcast frame. We can * also optimize station mode operation, all frames go * to the bss node. */ /* XXX can't hold lock across dup_bss 'cuz of recursive locking */ IEEE80211_NODE_LOCK(nt); if (vap->iv_opmode == IEEE80211_M_STA || vap->iv_opmode == IEEE80211_M_WDS || IEEE80211_IS_MULTICAST(macaddr)) ni = ieee80211_ref_node(vap->iv_bss); else ni = ieee80211_find_node_locked(nt, macaddr); IEEE80211_NODE_UNLOCK(nt); if (ni == NULL) { if (vap->iv_opmode == IEEE80211_M_IBSS || vap->iv_opmode == IEEE80211_M_AHDEMO) { /* * In adhoc mode cons up a node for the destination. * Note that we need an additional reference for the * caller to be consistent with * ieee80211_find_node_locked. */ ni = ieee80211_fakeup_adhoc_node(vap, macaddr); if (ni != NULL) (void) ieee80211_ref_node(ni); } else { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, macaddr, "no node, discard frame (%s)", __func__); vap->iv_stats.is_tx_nonode++; } } return ni; } static void _ieee80211_free_node(struct ieee80211_node *ni) { struct ieee80211_node_table *nt = ni->ni_table; /* * NB: careful about referencing the vap as it may be * gone if the last reference was held by a driver. * We know the com will always be present so it's safe * to use ni_ic below to reclaim resources. */ #if 0 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "%s %p<%s> in %s table\n", __func__, ni, ether_sprintf(ni->ni_macaddr), nt != NULL ? nt->nt_name : ""); #endif if (ni->ni_associd != 0) { struct ieee80211vap *vap = ni->ni_vap; if (vap->iv_aid_bitmap != NULL) IEEE80211_AID_CLR(vap, ni->ni_associd); } if (nt != NULL) { TAILQ_REMOVE(&nt->nt_node, ni, ni_list); LIST_REMOVE(ni, ni_hash); } ni->ni_ic->ic_node_free(ni); } /* * Clear any entry in the unicast key mapping table. */ static int node_clear_keyixmap(struct ieee80211_node_table *nt, struct ieee80211_node *ni) { ieee80211_keyix keyix; keyix = ni->ni_ucastkey.wk_rxkeyix; if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax && nt->nt_keyixmap[keyix] == ni) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: %p<%s> clear key map entry %u\n", __func__, ni, ether_sprintf(ni->ni_macaddr), keyix); nt->nt_keyixmap[keyix] = NULL; ieee80211_node_decref(ni); return 1; } return 0; } void #ifdef IEEE80211_DEBUG_REFCNT ieee80211_free_node_debug(struct ieee80211_node *ni, const char *func, int line) #else ieee80211_free_node(struct ieee80211_node *ni) #endif { struct ieee80211_node_table *nt = ni->ni_table; #ifdef IEEE80211_DEBUG_REFCNT IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)-1); #endif if (nt != NULL) { IEEE80211_NODE_LOCK(nt); if (ieee80211_node_dectestref(ni)) { /* * Last reference, reclaim state. */ _ieee80211_free_node(ni); } else if (ieee80211_node_refcnt(ni) == 1) if (node_clear_keyixmap(nt, ni)) _ieee80211_free_node(ni); IEEE80211_NODE_UNLOCK(nt); } else { if (ieee80211_node_dectestref(ni)) _ieee80211_free_node(ni); } } /* * Reclaim a unicast key and clear any key cache state. */ int ieee80211_node_delucastkey(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211_node_table *nt = &ic->ic_sta; struct ieee80211_node *nikey; ieee80211_keyix keyix; int isowned, status; /* * NB: We must beware of LOR here; deleting the key * can cause the crypto layer to block traffic updates * which can generate a LOR against the node table lock; * grab it here and stash the key index for our use below. * * Must also beware of recursion on the node table lock. * When called from node_cleanup we may already have * the node table lock held. Unfortunately there's no * way to separate out this path so we must do this * conditionally. */ isowned = IEEE80211_NODE_IS_LOCKED(nt); if (!isowned) IEEE80211_NODE_LOCK(nt); nikey = NULL; status = 1; /* NB: success */ if (ni->ni_ucastkey.wk_keyix != IEEE80211_KEYIX_NONE) { keyix = ni->ni_ucastkey.wk_rxkeyix; status = ieee80211_crypto_delkey(ni->ni_vap, &ni->ni_ucastkey); if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax) { nikey = nt->nt_keyixmap[keyix]; nt->nt_keyixmap[keyix] = NULL; } } if (!isowned) IEEE80211_NODE_UNLOCK(nt); if (nikey != NULL) { KASSERT(nikey == ni, ("key map out of sync, ni %p nikey %p", ni, nikey)); IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: delete key map entry %p<%s> refcnt %d\n", __func__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)-1); ieee80211_free_node(ni); } return status; } /* * Reclaim a node. If this is the last reference count then * do the normal free work. Otherwise remove it from the node * table and mark it gone by clearing the back-reference. */ static void node_reclaim(struct ieee80211_node_table *nt, struct ieee80211_node *ni) { IEEE80211_NODE_LOCK_ASSERT(nt); IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, "%s: remove %p<%s> from %s table, refcnt %d\n", __func__, ni, ether_sprintf(ni->ni_macaddr), nt->nt_name, ieee80211_node_refcnt(ni)-1); /* * Clear any entry in the unicast key mapping table. * We need to do it here so rx lookups don't find it * in the mapping table even if it's not in the hash * table. We cannot depend on the mapping table entry * being cleared because the node may not be free'd. */ (void)node_clear_keyixmap(nt, ni); if (!ieee80211_node_dectestref(ni)) { /* * Other references are present, just remove the * node from the table so it cannot be found. When * the references are dropped storage will be * reclaimed. */ TAILQ_REMOVE(&nt->nt_node, ni, ni_list); LIST_REMOVE(ni, ni_hash); ni->ni_table = NULL; /* clear reference */ } else _ieee80211_free_node(ni); } /* * Node table support. */ static void ieee80211_node_table_init(struct ieee80211com *ic, struct ieee80211_node_table *nt, const char *name, int inact, int keyixmax) { - struct ifnet *ifp = ic->ic_ifp; nt->nt_ic = ic; - IEEE80211_NODE_LOCK_INIT(nt, ifp->if_xname); - IEEE80211_NODE_ITERATE_LOCK_INIT(nt, ifp->if_xname); + IEEE80211_NODE_LOCK_INIT(nt, ic->ic_name); + IEEE80211_NODE_ITERATE_LOCK_INIT(nt, ic->ic_name); TAILQ_INIT(&nt->nt_node); nt->nt_name = name; nt->nt_scangen = 1; nt->nt_inact_init = inact; nt->nt_keyixmax = keyixmax; if (nt->nt_keyixmax > 0) { nt->nt_keyixmap = (struct ieee80211_node **) malloc( keyixmax * sizeof(struct ieee80211_node *), M_80211_NODE, M_NOWAIT | M_ZERO); if (nt->nt_keyixmap == NULL) - if_printf(ic->ic_ifp, + ic_printf(ic, "Cannot allocate key index map with %u entries\n", keyixmax); } else nt->nt_keyixmap = NULL; } static void ieee80211_node_table_reset(struct ieee80211_node_table *nt, struct ieee80211vap *match) { struct ieee80211_node *ni, *next; IEEE80211_NODE_LOCK(nt); TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next) { if (match != NULL && ni->ni_vap != match) continue; /* XXX can this happen? if so need's work */ if (ni->ni_associd != 0) { struct ieee80211vap *vap = ni->ni_vap; if (vap->iv_auth->ia_node_leave != NULL) vap->iv_auth->ia_node_leave(ni); if (vap->iv_aid_bitmap != NULL) IEEE80211_AID_CLR(vap, ni->ni_associd); } ni->ni_wdsvap = NULL; /* clear reference */ node_reclaim(nt, ni); } if (match != NULL && match->iv_opmode == IEEE80211_M_WDS) { /* * Make a separate pass to clear references to this vap * held by DWDS entries. They will not be matched above * because ni_vap will point to the ap vap but we still * need to clear ni_wdsvap when the WDS vap is destroyed * and/or reset. */ TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next) if (ni->ni_wdsvap == match) ni->ni_wdsvap = NULL; } IEEE80211_NODE_UNLOCK(nt); } static void ieee80211_node_table_cleanup(struct ieee80211_node_table *nt) { ieee80211_node_table_reset(nt, NULL); if (nt->nt_keyixmap != NULL) { #ifdef DIAGNOSTIC /* XXX verify all entries are NULL */ int i; for (i = 0; i < nt->nt_keyixmax; i++) if (nt->nt_keyixmap[i] != NULL) printf("%s: %s[%u] still active\n", __func__, nt->nt_name, i); #endif free(nt->nt_keyixmap, M_80211_NODE); nt->nt_keyixmap = NULL; } IEEE80211_NODE_ITERATE_LOCK_DESTROY(nt); IEEE80211_NODE_LOCK_DESTROY(nt); } /* * Timeout inactive stations and do related housekeeping. * Note that we cannot hold the node lock while sending a * frame as this would lead to a LOR. Instead we use a * generation number to mark nodes that we've scanned and * drop the lock and restart a scan if we have to time out * a node. Since we are single-threaded by virtue of * controlling the inactivity timer we can be sure this will * process each node only once. */ static void ieee80211_timeout_stations(struct ieee80211com *ic) { struct ieee80211_node_table *nt = &ic->ic_sta; struct ieee80211vap *vap; struct ieee80211_node *ni; int gen = 0; IEEE80211_NODE_ITERATE_LOCK(nt); gen = ++nt->nt_scangen; restart: IEEE80211_NODE_LOCK(nt); TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { if (ni->ni_scangen == gen) /* previously handled */ continue; ni->ni_scangen = gen; /* * Ignore entries for which have yet to receive an * authentication frame. These are transient and * will be reclaimed when the last reference to them * goes away (when frame xmits complete). */ vap = ni->ni_vap; /* * Only process stations when in RUN state. This * insures, for example, that we don't timeout an * inactive station during CAC. Note that CSA state * is actually handled in ieee80211_node_timeout as * it applies to more than timeout processing. */ if (vap->iv_state != IEEE80211_S_RUN) continue; /* XXX can vap be NULL? */ if ((vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_STA) && (ni->ni_flags & IEEE80211_NODE_AREF) == 0) continue; /* * Free fragment if not needed anymore * (last fragment older than 1s). * XXX doesn't belong here, move to node_age */ if (ni->ni_rxfrag[0] != NULL && ticks > ni->ni_rxfragstamp + hz) { m_freem(ni->ni_rxfrag[0]); ni->ni_rxfrag[0] = NULL; } if (ni->ni_inact > 0) { ni->ni_inact--; IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact %u inact_reload %u nrates %u", __func__, ni->ni_inact, ni->ni_inact_reload, ni->ni_rates.rs_nrates); } /* * Special case ourself; we may be idle for extended periods * of time and regardless reclaiming our state is wrong. * XXX run ic_node_age */ if (ni == vap->iv_bss) continue; if (ni->ni_associd != 0 || (vap->iv_opmode == IEEE80211_M_IBSS || vap->iv_opmode == IEEE80211_M_AHDEMO)) { /* * Age/drain resources held by the station. */ ic->ic_node_age(ni); /* * Probe the station before time it out. We * send a null data frame which may not be * universally supported by drivers (need it * for ps-poll support so it should be...). * * XXX don't probe the station unless we've * received a frame from them (and have * some idea of the rates they are capable * of); this will get fixed more properly * soon with better handling of the rate set. */ if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) && (0 < ni->ni_inact && ni->ni_inact <= vap->iv_inact_probe) && ni->ni_rates.rs_nrates != 0) { IEEE80211_NOTE(vap, IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, ni, "%s", "probe station due to inactivity"); /* * Grab a reference before unlocking the table * so the node cannot be reclaimed before we * send the frame. ieee80211_send_nulldata * understands we've done this and reclaims the * ref for us as needed. */ ieee80211_ref_node(ni); IEEE80211_NODE_UNLOCK(nt); ieee80211_send_nulldata(ni); /* XXX stat? */ goto restart; } } if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) && ni->ni_inact <= 0) { IEEE80211_NOTE(vap, IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, ni, "station timed out due to inactivity " "(refcnt %u)", ieee80211_node_refcnt(ni)); /* * Send a deauthenticate frame and drop the station. * This is somewhat complicated due to reference counts * and locking. At this point a station will typically * have a reference count of 1. ieee80211_node_leave * will do a "free" of the node which will drop the * reference count. But in the meantime a reference * wil be held by the deauth frame. The actual reclaim * of the node will happen either after the tx is * completed or by ieee80211_node_leave. * * Separately we must drop the node lock before sending * in case the driver takes a lock, as this can result * in a LOR between the node lock and the driver lock. */ ieee80211_ref_node(ni); IEEE80211_NODE_UNLOCK(nt); if (ni->ni_associd != 0) { IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, IEEE80211_REASON_AUTH_EXPIRE); } ieee80211_node_leave(ni); ieee80211_free_node(ni); vap->iv_stats.is_node_timeout++; goto restart; } } IEEE80211_NODE_UNLOCK(nt); IEEE80211_NODE_ITERATE_UNLOCK(nt); } /* * Aggressively reclaim resources. This should be used * only in a critical situation to reclaim mbuf resources. */ void ieee80211_drain(struct ieee80211com *ic) { struct ieee80211_node_table *nt = &ic->ic_sta; struct ieee80211vap *vap; struct ieee80211_node *ni; IEEE80211_NODE_LOCK(nt); TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { /* * Ignore entries for which have yet to receive an * authentication frame. These are transient and * will be reclaimed when the last reference to them * goes away (when frame xmits complete). */ vap = ni->ni_vap; /* * Only process stations when in RUN state. This * insures, for example, that we don't timeout an * inactive station during CAC. Note that CSA state * is actually handled in ieee80211_node_timeout as * it applies to more than timeout processing. */ if (vap->iv_state != IEEE80211_S_RUN) continue; /* XXX can vap be NULL? */ if ((vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_STA) && (ni->ni_flags & IEEE80211_NODE_AREF) == 0) continue; /* * Free fragments. * XXX doesn't belong here, move to node_drain */ if (ni->ni_rxfrag[0] != NULL) { m_freem(ni->ni_rxfrag[0]); ni->ni_rxfrag[0] = NULL; } /* * Drain resources held by the station. */ ic->ic_node_drain(ni); } IEEE80211_NODE_UNLOCK(nt); } /* * Per-ieee80211com inactivity timer callback. */ void ieee80211_node_timeout(void *arg) { struct ieee80211com *ic = arg; /* * Defer timeout processing if a channel switch is pending. * We typically need to be mute so not doing things that * might generate frames is good to handle in one place. * Supressing the station timeout processing may extend the * lifetime of inactive stations (by not decrementing their * idle counters) but this should be ok unless the CSA is * active for an unusually long time. */ if ((ic->ic_flags & IEEE80211_F_CSAPENDING) == 0) { ieee80211_scan_timeout(ic); ieee80211_timeout_stations(ic); ieee80211_ageq_age(&ic->ic_stageq, IEEE80211_INACT_WAIT); IEEE80211_LOCK(ic); ieee80211_erp_timeout(ic); ieee80211_ht_timeout(ic); IEEE80211_UNLOCK(ic); } callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz, ieee80211_node_timeout, ic); } /* * Iterate over the node table and return an array of ref'ed nodes. * * This is separated out from calling the actual node function so that * no LORs will occur. * * If there are too many nodes (ie, the number of nodes doesn't fit * within 'max_aid' entries) then the node references will be freed * and an error will be returned. * * The responsibility of allocating and freeing "ni_arr" is up to * the caller. */ int ieee80211_iterate_nt(struct ieee80211_node_table *nt, struct ieee80211_node **ni_arr, uint16_t max_aid) { u_int gen; int i, j, ret; struct ieee80211_node *ni; IEEE80211_NODE_ITERATE_LOCK(nt); IEEE80211_NODE_LOCK(nt); gen = ++nt->nt_scangen; i = ret = 0; /* * We simply assume here that since the node * scan generation doesn't change (as * we are holding both the node table and * node table iteration locks), we can simply * assign it to the node here. */ TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { if (i >= max_aid) { ret = E2BIG; - if_printf(nt->nt_ic->ic_ifp, - "Node array overflow: max=%u", max_aid); + ic_printf(nt->nt_ic, "Node array overflow: max=%u", + max_aid); break; } ni_arr[i] = ieee80211_ref_node(ni); ni_arr[i]->ni_scangen = gen; i++; } /* * It's safe to unlock here. * * If we're successful, the list is returned. * If we're unsuccessful, the list is ignored * and we remove our references. * * This avoids any potential LOR with * ieee80211_free_node(). */ IEEE80211_NODE_UNLOCK(nt); IEEE80211_NODE_ITERATE_UNLOCK(nt); /* * If ret is non-zero, we hit some kind of error. * Rather than walking some nodes, we'll walk none * of them. */ if (ret) { for (j = 0; j < i; j++) { /* ieee80211_free_node() locks by itself */ ieee80211_free_node(ni_arr[j]); } } return (ret); } /* * Just a wrapper, so we don't have to change every ieee80211_iterate_nodes() * reference in the source. * * Note that this fetches 'max_aid' from the first VAP, rather than finding * the largest max_aid from all VAPs. */ void ieee80211_iterate_nodes(struct ieee80211_node_table *nt, ieee80211_iter_func *f, void *arg) { struct ieee80211_node **ni_arr; size_t size; int i; uint16_t max_aid; struct ieee80211vap *vap; /* Overdoing it default */ max_aid = IEEE80211_AID_MAX; /* Handle the case of there being no vaps just yet */ vap = TAILQ_FIRST(&nt->nt_ic->ic_vaps); if (vap != NULL) max_aid = vap->iv_max_aid; size = max_aid * sizeof(struct ieee80211_node *); ni_arr = (struct ieee80211_node **) malloc(size, M_80211_NODE, M_NOWAIT | M_ZERO); if (ni_arr == NULL) return; /* * If this fails, the node table won't have any * valid entries - ieee80211_iterate_nt() frees * the references to them. So don't try walking * the table; just skip to the end and free the * temporary memory. */ if (ieee80211_iterate_nt(nt, ni_arr, max_aid) != 0) goto done; for (i = 0; i < max_aid; i++) { if (ni_arr[i] == NULL) /* end of the list */ break; (*f)(arg, ni_arr[i]); /* ieee80211_free_node() locks by itself */ ieee80211_free_node(ni_arr[i]); } done: free(ni_arr, M_80211_NODE); } void ieee80211_dump_node(struct ieee80211_node_table *nt, struct ieee80211_node *ni) { printf("0x%p: mac %s refcnt %d\n", ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); printf("\tscangen %u authmode %u flags 0x%x\n", ni->ni_scangen, ni->ni_authmode, ni->ni_flags); printf("\tassocid 0x%x txpower %u vlan %u\n", ni->ni_associd, ni->ni_txpower, ni->ni_vlan); printf("\ttxseq %u rxseq %u fragno %u rxfragstamp %u\n", ni->ni_txseqs[IEEE80211_NONQOS_TID], ni->ni_rxseqs[IEEE80211_NONQOS_TID] >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[IEEE80211_NONQOS_TID] & IEEE80211_SEQ_FRAG_MASK, ni->ni_rxfragstamp); printf("\trssi %d noise %d intval %u capinfo 0x%x\n", node_getrssi(ni), ni->ni_noise, ni->ni_intval, ni->ni_capinfo); printf("\tbssid %s essid \"%.*s\" channel %u:0x%x\n", ether_sprintf(ni->ni_bssid), ni->ni_esslen, ni->ni_essid, ni->ni_chan->ic_freq, ni->ni_chan->ic_flags); printf("\tinact %u inact_reload %u txrate %u\n", ni->ni_inact, ni->ni_inact_reload, ni->ni_txrate); printf("\thtcap %x htparam %x htctlchan %u ht2ndchan %u\n", ni->ni_htcap, ni->ni_htparam, ni->ni_htctlchan, ni->ni_ht2ndchan); printf("\thtopmode %x htstbc %x chw %u\n", ni->ni_htopmode, ni->ni_htstbc, ni->ni_chw); } void ieee80211_dump_nodes(struct ieee80211_node_table *nt) { ieee80211_iterate_nodes(nt, (ieee80211_iter_func *) ieee80211_dump_node, nt); } static void ieee80211_notify_erp_locked(struct ieee80211com *ic) { struct ieee80211vap *vap; IEEE80211_LOCK_ASSERT(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_opmode == IEEE80211_M_HOSTAP) ieee80211_beacon_notify(vap, IEEE80211_BEACON_ERP); } void ieee80211_notify_erp(struct ieee80211com *ic) { IEEE80211_LOCK(ic); ieee80211_notify_erp_locked(ic); IEEE80211_UNLOCK(ic); } /* * Handle a station joining an 11g network. */ static void ieee80211_node_join_11g(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; IEEE80211_LOCK_ASSERT(ic); /* * Station isn't capable of short slot time. Bump * the count of long slot time stations and disable * use of short slot time. Note that the actual switch * over to long slot time use may not occur until the * next beacon transmission (per sec. 7.3.1.4 of 11g). */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) { ic->ic_longslotsta++; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "station needs long slot time, count %d", ic->ic_longslotsta); /* XXX vap's w/ conflicting needs won't work */ if (!IEEE80211_IS_CHAN_108G(ic->ic_bsschan)) { /* * Don't force slot time when switched to turbo * mode as non-ERP stations won't be present; this * need only be done when on the normal G channel. */ ieee80211_set_shortslottime(ic, 0); } } /* * If the new station is not an ERP station * then bump the counter and enable protection * if configured. */ if (!ieee80211_iserp_rateset(&ni->ni_rates)) { ic->ic_nonerpsta++; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "station is !ERP, %d non-ERP stations associated", ic->ic_nonerpsta); /* * If station does not support short preamble * then we must enable use of Barker preamble. */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE) == 0) { IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "%s", "station needs long preamble"); ic->ic_flags |= IEEE80211_F_USEBARKER; ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE; } /* * If protection is configured and this is the first * indication we should use protection, enable it. */ if (ic->ic_protmode != IEEE80211_PROT_NONE && ic->ic_nonerpsta == 1 && (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: enable use of protection\n", __func__); ic->ic_flags |= IEEE80211_F_USEPROT; ieee80211_notify_erp_locked(ic); } } else ni->ni_flags |= IEEE80211_NODE_ERP; } void ieee80211_node_join(struct ieee80211_node *ni, int resp) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; int newassoc; if (ni->ni_associd == 0) { uint16_t aid; KASSERT(vap->iv_aid_bitmap != NULL, ("no aid bitmap")); /* * It would be good to search the bitmap * more efficiently, but this will do for now. */ for (aid = 1; aid < vap->iv_max_aid; aid++) { if (!IEEE80211_AID_ISSET(vap, aid)) break; } if (aid >= vap->iv_max_aid) { IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_TOOMANY); ieee80211_node_leave(ni); return; } ni->ni_associd = aid | 0xc000; ni->ni_jointime = time_uptime; IEEE80211_LOCK(ic); IEEE80211_AID_SET(vap, ni->ni_associd); vap->iv_sta_assoc++; ic->ic_sta_assoc++; if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan)) ieee80211_ht_node_join(ni); if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) && IEEE80211_IS_CHAN_FULL(ic->ic_bsschan)) ieee80211_node_join_11g(ni); IEEE80211_UNLOCK(ic); newassoc = 1; } else newassoc = 0; IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni, "station associated at aid %d: %s preamble, %s slot time%s%s%s%s%s%s%s%s", IEEE80211_NODE_AID(ni), ic->ic_flags & IEEE80211_F_SHPREAMBLE ? "short" : "long", ic->ic_flags & IEEE80211_F_SHSLOT ? "short" : "long", ic->ic_flags & IEEE80211_F_USEPROT ? ", protection" : "", ni->ni_flags & IEEE80211_NODE_QOS ? ", QoS" : "", ni->ni_flags & IEEE80211_NODE_HT ? (ni->ni_chw == 40 ? ", HT40" : ", HT20") : "", ni->ni_flags & IEEE80211_NODE_AMPDU ? " (+AMPDU)" : "", ni->ni_flags & IEEE80211_NODE_MIMO_RTS ? " (+SMPS-DYN)" : ni->ni_flags & IEEE80211_NODE_MIMO_PS ? " (+SMPS)" : "", ni->ni_flags & IEEE80211_NODE_RIFS ? " (+RIFS)" : "", IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF) ? ", fast-frames" : "", IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_TURBOP) ? ", turbo" : "" ); ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); /* give driver a chance to setup state like ni_txrate */ if (ic->ic_newassoc != NULL) ic->ic_newassoc(ni, newassoc); IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_SUCCESS); /* tell the authenticator about new station */ if (vap->iv_auth->ia_node_join != NULL) vap->iv_auth->ia_node_join(ni); ieee80211_notify_node_join(ni, resp == IEEE80211_FC0_SUBTYPE_ASSOC_RESP); } static void disable_protection(struct ieee80211com *ic) { KASSERT(ic->ic_nonerpsta == 0 && (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0, ("%d non ERP stations, flags 0x%x", ic->ic_nonerpsta, ic->ic_flags_ext)); ic->ic_flags &= ~IEEE80211_F_USEPROT; /* XXX verify mode? */ if (ic->ic_caps & IEEE80211_C_SHPREAMBLE) { ic->ic_flags |= IEEE80211_F_SHPREAMBLE; ic->ic_flags &= ~IEEE80211_F_USEBARKER; } ieee80211_notify_erp_locked(ic); } /* * Handle a station leaving an 11g network. */ static void ieee80211_node_leave_11g(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; IEEE80211_LOCK_ASSERT(ic); KASSERT(IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan), ("not in 11g, bss %u:0x%x", ic->ic_bsschan->ic_freq, ic->ic_bsschan->ic_flags)); /* * If a long slot station do the slot time bookkeeping. */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) { KASSERT(ic->ic_longslotsta > 0, ("bogus long slot station count %d", ic->ic_longslotsta)); ic->ic_longslotsta--; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "long slot time station leaves, count now %d", ic->ic_longslotsta); if (ic->ic_longslotsta == 0) { /* * Re-enable use of short slot time if supported * and not operating in IBSS mode (per spec). */ if ((ic->ic_caps & IEEE80211_C_SHSLOT) && ic->ic_opmode != IEEE80211_M_IBSS) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: re-enable use of short slot time\n", __func__); ieee80211_set_shortslottime(ic, 1); } } } /* * If a non-ERP station do the protection-related bookkeeping. */ if ((ni->ni_flags & IEEE80211_NODE_ERP) == 0) { KASSERT(ic->ic_nonerpsta > 0, ("bogus non-ERP station count %d", ic->ic_nonerpsta)); ic->ic_nonerpsta--; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, "non-ERP station leaves, count now %d%s", ic->ic_nonerpsta, (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) ? " (non-ERP sta present)" : ""); if (ic->ic_nonerpsta == 0 && (ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) { IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, "%s: disable use of protection\n", __func__); disable_protection(ic); } } } /* * Time out presence of an overlapping bss with non-ERP * stations. When operating in hostap mode we listen for * beacons from other stations and if we identify a non-ERP * station is present we enable protection. To identify * when all non-ERP stations are gone we time out this * condition. */ static void ieee80211_erp_timeout(struct ieee80211com *ic) { IEEE80211_LOCK_ASSERT(ic); if ((ic->ic_flags_ext & IEEE80211_FEXT_NONERP_PR) && time_after(ticks, ic->ic_lastnonerp + IEEE80211_NONERP_PRESENT_AGE)) { #if 0 IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni, "%s", "age out non-ERP sta present on channel"); #endif ic->ic_flags_ext &= ~IEEE80211_FEXT_NONERP_PR; if (ic->ic_nonerpsta == 0) disable_protection(ic); } } /* * Handle bookkeeping for station deauthentication/disassociation * when operating as an ap. */ void ieee80211_node_leave(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_node_table *nt = ni->ni_table; IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni, "station with aid %d leaves", IEEE80211_NODE_AID(ni)); KASSERT(vap->iv_opmode != IEEE80211_M_STA, ("unexpected operating mode %u", vap->iv_opmode)); /* * If node wasn't previously associated all * we need to do is reclaim the reference. */ /* XXX ibss mode bypasses 11g and notification */ if (ni->ni_associd == 0) goto done; /* * Tell the authenticator the station is leaving. * Note that we must do this before yanking the * association id as the authenticator uses the * associd to locate it's state block. */ if (vap->iv_auth->ia_node_leave != NULL) vap->iv_auth->ia_node_leave(ni); IEEE80211_LOCK(ic); IEEE80211_AID_CLR(vap, ni->ni_associd); ni->ni_associd = 0; vap->iv_sta_assoc--; ic->ic_sta_assoc--; if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan)) ieee80211_ht_node_leave(ni); if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) && IEEE80211_IS_CHAN_FULL(ic->ic_bsschan)) ieee80211_node_leave_11g(ni); IEEE80211_UNLOCK(ic); /* * Cleanup station state. In particular clear various * state that might otherwise be reused if the node * is reused before the reference count goes to zero * (and memory is reclaimed). */ ieee80211_sta_leave(ni); done: /* * Remove the node from any table it's recorded in and * drop the caller's reference. Removal from the table * is important to insure the node is not reprocessed * for inactivity. */ if (nt != NULL) { IEEE80211_NODE_LOCK(nt); node_reclaim(nt, ni); IEEE80211_NODE_UNLOCK(nt); } else ieee80211_free_node(ni); } struct rssiinfo { struct ieee80211vap *vap; int rssi_samples; uint32_t rssi_total; }; static void get_hostap_rssi(void *arg, struct ieee80211_node *ni) { struct rssiinfo *info = arg; struct ieee80211vap *vap = ni->ni_vap; int8_t rssi; if (info->vap != vap) return; /* only associated stations */ if (ni->ni_associd == 0) return; rssi = vap->iv_ic->ic_node_getrssi(ni); if (rssi != 0) { info->rssi_samples++; info->rssi_total += rssi; } } static void get_adhoc_rssi(void *arg, struct ieee80211_node *ni) { struct rssiinfo *info = arg; struct ieee80211vap *vap = ni->ni_vap; int8_t rssi; if (info->vap != vap) return; /* only neighbors */ /* XXX check bssid */ if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) return; rssi = vap->iv_ic->ic_node_getrssi(ni); if (rssi != 0) { info->rssi_samples++; info->rssi_total += rssi; } } #ifdef IEEE80211_SUPPORT_MESH static void get_mesh_rssi(void *arg, struct ieee80211_node *ni) { struct rssiinfo *info = arg; struct ieee80211vap *vap = ni->ni_vap; int8_t rssi; if (info->vap != vap) return; /* only neighbors that peered successfully */ if (ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED) return; rssi = vap->iv_ic->ic_node_getrssi(ni); if (rssi != 0) { info->rssi_samples++; info->rssi_total += rssi; } } #endif /* IEEE80211_SUPPORT_MESH */ int8_t ieee80211_getrssi(struct ieee80211vap *vap) { #define NZ(x) ((x) == 0 ? 1 : (x)) struct ieee80211com *ic = vap->iv_ic; struct rssiinfo info; info.rssi_total = 0; info.rssi_samples = 0; info.vap = vap; switch (vap->iv_opmode) { case IEEE80211_M_IBSS: /* average of all ibss neighbors */ case IEEE80211_M_AHDEMO: /* average of all neighbors */ ieee80211_iterate_nodes(&ic->ic_sta, get_adhoc_rssi, &info); break; case IEEE80211_M_HOSTAP: /* average of all associated stations */ ieee80211_iterate_nodes(&ic->ic_sta, get_hostap_rssi, &info); break; #ifdef IEEE80211_SUPPORT_MESH case IEEE80211_M_MBSS: /* average of all mesh neighbors */ ieee80211_iterate_nodes(&ic->ic_sta, get_mesh_rssi, &info); break; #endif case IEEE80211_M_MONITOR: /* XXX */ case IEEE80211_M_STA: /* use stats from associated ap */ default: if (vap->iv_bss != NULL) info.rssi_total = ic->ic_node_getrssi(vap->iv_bss); info.rssi_samples = 1; break; } return info.rssi_total / NZ(info.rssi_samples); #undef NZ } void ieee80211_getsignal(struct ieee80211vap *vap, int8_t *rssi, int8_t *noise) { if (vap->iv_bss == NULL) /* NB: shouldn't happen */ return; vap->iv_ic->ic_node_getsignal(vap->iv_bss, rssi, noise); /* for non-station mode return avg'd rssi accounting */ if (vap->iv_opmode != IEEE80211_M_STA) *rssi = ieee80211_getrssi(vap); } Index: head/sys/net80211/ieee80211_proto.c =================================================================== --- head/sys/net80211/ieee80211_proto.c (revision 283528) +++ head/sys/net80211/ieee80211_proto.c (revision 283529) @@ -1,1996 +1,1995 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 protocol support. */ #include "opt_inet.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include /* XXX for ether_sprintf */ #include #include #include #include #include #ifdef IEEE80211_SUPPORT_MESH #include #endif #include #include /* XXX tunables */ #define AGGRESSIVE_MODE_SWITCH_HYSTERESIS 3 /* pkts / 100ms */ #define HIGH_PRI_SWITCH_THRESH 10 /* pkts / 100ms */ const char *ieee80211_mgt_subtype_name[] = { "assoc_req", "assoc_resp", "reassoc_req", "reassoc_resp", "probe_req", "probe_resp", "reserved#6", "reserved#7", "beacon", "atim", "disassoc", "auth", "deauth", "action", "action_noack", "reserved#15" }; const char *ieee80211_ctl_subtype_name[] = { "reserved#0", "reserved#1", "reserved#2", "reserved#3", "reserved#3", "reserved#5", "reserved#6", "reserved#7", "reserved#8", "reserved#9", "ps_poll", "rts", "cts", "ack", "cf_end", "cf_end_ack" }; const char *ieee80211_opmode_name[IEEE80211_OPMODE_MAX] = { "IBSS", /* IEEE80211_M_IBSS */ "STA", /* IEEE80211_M_STA */ "WDS", /* IEEE80211_M_WDS */ "AHDEMO", /* IEEE80211_M_AHDEMO */ "HOSTAP", /* IEEE80211_M_HOSTAP */ "MONITOR", /* IEEE80211_M_MONITOR */ "MBSS" /* IEEE80211_M_MBSS */ }; const char *ieee80211_state_name[IEEE80211_S_MAX] = { "INIT", /* IEEE80211_S_INIT */ "SCAN", /* IEEE80211_S_SCAN */ "AUTH", /* IEEE80211_S_AUTH */ "ASSOC", /* IEEE80211_S_ASSOC */ "CAC", /* IEEE80211_S_CAC */ "RUN", /* IEEE80211_S_RUN */ "CSA", /* IEEE80211_S_CSA */ "SLEEP", /* IEEE80211_S_SLEEP */ }; const char *ieee80211_wme_acnames[] = { "WME_AC_BE", "WME_AC_BK", "WME_AC_VI", "WME_AC_VO", "WME_UPSD", }; static void beacon_miss(void *, int); static void beacon_swmiss(void *, int); static void parent_updown(void *, int); static void update_mcast(void *, int); static void update_promisc(void *, int); static void update_channel(void *, int); static void update_chw(void *, int); static void ieee80211_newstate_cb(void *, int); static int null_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, const struct ieee80211_bpf_params *params) { - struct ifnet *ifp = ni->ni_ic->ic_ifp; - if_printf(ifp, "missing ic_raw_xmit callback, drop frame\n"); + ic_printf(ni->ni_ic, "missing ic_raw_xmit callback, drop frame\n"); m_freem(m); return ENETDOWN; } void ieee80211_proto_attach(struct ieee80211com *ic) { struct ifnet *ifp = ic->ic_ifp; /* override the 802.3 setting */ ifp->if_hdrlen = ic->ic_headroom + sizeof(struct ieee80211_qosframe_addr4) + IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_EXTIVLEN; /* XXX no way to recalculate on ifdetach */ if (ALIGN(ifp->if_hdrlen) > max_linkhdr) { /* XXX sanity check... */ max_linkhdr = ALIGN(ifp->if_hdrlen); max_hdr = max_linkhdr + max_protohdr; max_datalen = MHLEN - max_hdr; } ic->ic_protmode = IEEE80211_PROT_CTSONLY; TASK_INIT(&ic->ic_parent_task, 0, parent_updown, ifp); TASK_INIT(&ic->ic_mcast_task, 0, update_mcast, ic); TASK_INIT(&ic->ic_promisc_task, 0, update_promisc, ic); TASK_INIT(&ic->ic_chan_task, 0, update_channel, ic); TASK_INIT(&ic->ic_bmiss_task, 0, beacon_miss, ic); TASK_INIT(&ic->ic_chw_task, 0, update_chw, ic); ic->ic_wme.wme_hipri_switch_hysteresis = AGGRESSIVE_MODE_SWITCH_HYSTERESIS; /* initialize management frame handlers */ ic->ic_send_mgmt = ieee80211_send_mgmt; ic->ic_raw_xmit = null_raw_xmit; ieee80211_adhoc_attach(ic); ieee80211_sta_attach(ic); ieee80211_wds_attach(ic); ieee80211_hostap_attach(ic); #ifdef IEEE80211_SUPPORT_MESH ieee80211_mesh_attach(ic); #endif ieee80211_monitor_attach(ic); } void ieee80211_proto_detach(struct ieee80211com *ic) { ieee80211_monitor_detach(ic); #ifdef IEEE80211_SUPPORT_MESH ieee80211_mesh_detach(ic); #endif ieee80211_hostap_detach(ic); ieee80211_wds_detach(ic); ieee80211_adhoc_detach(ic); ieee80211_sta_detach(ic); } static void null_update_beacon(struct ieee80211vap *vap, int item) { } void ieee80211_proto_vattach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ifnet *ifp = vap->iv_ifp; int i; /* override the 802.3 setting */ ifp->if_hdrlen = ic->ic_ifp->if_hdrlen; vap->iv_rtsthreshold = IEEE80211_RTS_DEFAULT; vap->iv_fragthreshold = IEEE80211_FRAG_DEFAULT; vap->iv_bmiss_max = IEEE80211_BMISS_MAX; callout_init_mtx(&vap->iv_swbmiss, IEEE80211_LOCK_OBJ(ic), 0); callout_init(&vap->iv_mgtsend, 1); TASK_INIT(&vap->iv_nstate_task, 0, ieee80211_newstate_cb, vap); TASK_INIT(&vap->iv_swbmiss_task, 0, beacon_swmiss, vap); /* * Install default tx rate handling: no fixed rate, lowest * supported rate for mgmt and multicast frames. Default * max retry count. These settings can be changed by the * driver and/or user applications. */ for (i = IEEE80211_MODE_11A; i < IEEE80211_MODE_MAX; i++) { const struct ieee80211_rateset *rs = &ic->ic_sup_rates[i]; vap->iv_txparms[i].ucastrate = IEEE80211_FIXED_RATE_NONE; /* * Setting the management rate to MCS 0 assumes that the * BSS Basic rate set is empty and the BSS Basic MCS set * is not. * * Since we're not checking this, default to the lowest * defined rate for this mode. * * At least one 11n AP (DLINK DIR-825) is reported to drop * some MCS management traffic (eg BA response frames.) * * See also: 9.6.0 of the 802.11n-2009 specification. */ #ifdef NOTYET if (i == IEEE80211_MODE_11NA || i == IEEE80211_MODE_11NG) { vap->iv_txparms[i].mgmtrate = 0 | IEEE80211_RATE_MCS; vap->iv_txparms[i].mcastrate = 0 | IEEE80211_RATE_MCS; } else { vap->iv_txparms[i].mgmtrate = rs->rs_rates[0] & IEEE80211_RATE_VAL; vap->iv_txparms[i].mcastrate = rs->rs_rates[0] & IEEE80211_RATE_VAL; } #endif vap->iv_txparms[i].mgmtrate = rs->rs_rates[0] & IEEE80211_RATE_VAL; vap->iv_txparms[i].mcastrate = rs->rs_rates[0] & IEEE80211_RATE_VAL; vap->iv_txparms[i].maxretry = IEEE80211_TXMAX_DEFAULT; } vap->iv_roaming = IEEE80211_ROAMING_AUTO; vap->iv_update_beacon = null_update_beacon; vap->iv_deliver_data = ieee80211_deliver_data; /* attach support for operating mode */ ic->ic_vattach[vap->iv_opmode](vap); } void ieee80211_proto_vdetach(struct ieee80211vap *vap) { #define FREEAPPIE(ie) do { \ if (ie != NULL) \ free(ie, M_80211_NODE_IE); \ } while (0) /* * Detach operating mode module. */ if (vap->iv_opdetach != NULL) vap->iv_opdetach(vap); /* * This should not be needed as we detach when reseting * the state but be conservative here since the * authenticator may do things like spawn kernel threads. */ if (vap->iv_auth->ia_detach != NULL) vap->iv_auth->ia_detach(vap); /* * Detach any ACL'ator. */ if (vap->iv_acl != NULL) vap->iv_acl->iac_detach(vap); FREEAPPIE(vap->iv_appie_beacon); FREEAPPIE(vap->iv_appie_probereq); FREEAPPIE(vap->iv_appie_proberesp); FREEAPPIE(vap->iv_appie_assocreq); FREEAPPIE(vap->iv_appie_assocresp); FREEAPPIE(vap->iv_appie_wpa); #undef FREEAPPIE } /* * Simple-minded authenticator module support. */ #define IEEE80211_AUTH_MAX (IEEE80211_AUTH_WPA+1) /* XXX well-known names */ static const char *auth_modnames[IEEE80211_AUTH_MAX] = { "wlan_internal", /* IEEE80211_AUTH_NONE */ "wlan_internal", /* IEEE80211_AUTH_OPEN */ "wlan_internal", /* IEEE80211_AUTH_SHARED */ "wlan_xauth", /* IEEE80211_AUTH_8021X */ "wlan_internal", /* IEEE80211_AUTH_AUTO */ "wlan_xauth", /* IEEE80211_AUTH_WPA */ }; static const struct ieee80211_authenticator *authenticators[IEEE80211_AUTH_MAX]; static const struct ieee80211_authenticator auth_internal = { .ia_name = "wlan_internal", .ia_attach = NULL, .ia_detach = NULL, .ia_node_join = NULL, .ia_node_leave = NULL, }; /* * Setup internal authenticators once; they are never unregistered. */ static void ieee80211_auth_setup(void) { ieee80211_authenticator_register(IEEE80211_AUTH_OPEN, &auth_internal); ieee80211_authenticator_register(IEEE80211_AUTH_SHARED, &auth_internal); ieee80211_authenticator_register(IEEE80211_AUTH_AUTO, &auth_internal); } SYSINIT(wlan_auth, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_auth_setup, NULL); const struct ieee80211_authenticator * ieee80211_authenticator_get(int auth) { if (auth >= IEEE80211_AUTH_MAX) return NULL; if (authenticators[auth] == NULL) ieee80211_load_module(auth_modnames[auth]); return authenticators[auth]; } void ieee80211_authenticator_register(int type, const struct ieee80211_authenticator *auth) { if (type >= IEEE80211_AUTH_MAX) return; authenticators[type] = auth; } void ieee80211_authenticator_unregister(int type) { if (type >= IEEE80211_AUTH_MAX) return; authenticators[type] = NULL; } /* * Very simple-minded ACL module support. */ /* XXX just one for now */ static const struct ieee80211_aclator *acl = NULL; void ieee80211_aclator_register(const struct ieee80211_aclator *iac) { printf("wlan: %s acl policy registered\n", iac->iac_name); acl = iac; } void ieee80211_aclator_unregister(const struct ieee80211_aclator *iac) { if (acl == iac) acl = NULL; printf("wlan: %s acl policy unregistered\n", iac->iac_name); } const struct ieee80211_aclator * ieee80211_aclator_get(const char *name) { if (acl == NULL) ieee80211_load_module("wlan_acl"); return acl != NULL && strcmp(acl->iac_name, name) == 0 ? acl : NULL; } void ieee80211_print_essid(const uint8_t *essid, int len) { const uint8_t *p; int i; if (len > IEEE80211_NWID_LEN) len = IEEE80211_NWID_LEN; /* determine printable or not */ for (i = 0, p = essid; i < len; i++, p++) { if (*p < ' ' || *p > 0x7e) break; } if (i == len) { printf("\""); for (i = 0, p = essid; i < len; i++, p++) printf("%c", *p); printf("\""); } else { printf("0x"); for (i = 0, p = essid; i < len; i++, p++) printf("%02x", *p); } } void ieee80211_dump_pkt(struct ieee80211com *ic, const uint8_t *buf, int len, int rate, int rssi) { const struct ieee80211_frame *wh; int i; wh = (const struct ieee80211_frame *)buf; switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) { case IEEE80211_FC1_DIR_NODS: printf("NODS %s", ether_sprintf(wh->i_addr2)); printf("->%s", ether_sprintf(wh->i_addr1)); printf("(%s)", ether_sprintf(wh->i_addr3)); break; case IEEE80211_FC1_DIR_TODS: printf("TODS %s", ether_sprintf(wh->i_addr2)); printf("->%s", ether_sprintf(wh->i_addr3)); printf("(%s)", ether_sprintf(wh->i_addr1)); break; case IEEE80211_FC1_DIR_FROMDS: printf("FRDS %s", ether_sprintf(wh->i_addr3)); printf("->%s", ether_sprintf(wh->i_addr1)); printf("(%s)", ether_sprintf(wh->i_addr2)); break; case IEEE80211_FC1_DIR_DSTODS: printf("DSDS %s", ether_sprintf((const uint8_t *)&wh[1])); printf("->%s", ether_sprintf(wh->i_addr3)); printf("(%s", ether_sprintf(wh->i_addr2)); printf("->%s)", ether_sprintf(wh->i_addr1)); break; } switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) { case IEEE80211_FC0_TYPE_DATA: printf(" data"); break; case IEEE80211_FC0_TYPE_MGT: printf(" %s", ieee80211_mgt_subtype_name[ (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT]); break; default: printf(" type#%d", wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK); break; } if (IEEE80211_QOS_HAS_SEQ(wh)) { const struct ieee80211_qosframe *qwh = (const struct ieee80211_qosframe *)buf; printf(" QoS [TID %u%s]", qwh->i_qos[0] & IEEE80211_QOS_TID, qwh->i_qos[0] & IEEE80211_QOS_ACKPOLICY ? " ACM" : ""); } if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { int off; off = ieee80211_anyhdrspace(ic, wh); printf(" WEP [IV %.02x %.02x %.02x", buf[off+0], buf[off+1], buf[off+2]); if (buf[off+IEEE80211_WEP_IVLEN] & IEEE80211_WEP_EXTIV) printf(" %.02x %.02x %.02x", buf[off+4], buf[off+5], buf[off+6]); printf(" KID %u]", buf[off+IEEE80211_WEP_IVLEN] >> 6); } if (rate >= 0) printf(" %dM", rate / 2); if (rssi >= 0) printf(" +%d", rssi); printf("\n"); if (len > 0) { for (i = 0; i < len; i++) { if ((i & 1) == 0) printf(" "); printf("%02x", buf[i]); } printf("\n"); } } static __inline int findrix(const struct ieee80211_rateset *rs, int r) { int i; for (i = 0; i < rs->rs_nrates; i++) if ((rs->rs_rates[i] & IEEE80211_RATE_VAL) == r) return i; return -1; } int ieee80211_fix_rate(struct ieee80211_node *ni, struct ieee80211_rateset *nrs, int flags) { #define RV(v) ((v) & IEEE80211_RATE_VAL) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; int i, j, rix, error; int okrate, badrate, fixedrate, ucastrate; const struct ieee80211_rateset *srs; uint8_t r; error = 0; okrate = badrate = 0; ucastrate = vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)].ucastrate; if (ucastrate != IEEE80211_FIXED_RATE_NONE) { /* * Workaround awkwardness with fixed rate. We are called * to check both the legacy rate set and the HT rate set * but we must apply any legacy fixed rate check only to the * legacy rate set and vice versa. We cannot tell what type * of rate set we've been given (legacy or HT) but we can * distinguish the fixed rate type (MCS have 0x80 set). * So to deal with this the caller communicates whether to * check MCS or legacy rate using the flags and we use the * type of any fixed rate to avoid applying an MCS to a * legacy rate and vice versa. */ if (ucastrate & 0x80) { if (flags & IEEE80211_F_DOFRATE) flags &= ~IEEE80211_F_DOFRATE; } else if ((ucastrate & 0x80) == 0) { if (flags & IEEE80211_F_DOFMCS) flags &= ~IEEE80211_F_DOFMCS; } /* NB: required to make MCS match below work */ ucastrate &= IEEE80211_RATE_VAL; } fixedrate = IEEE80211_FIXED_RATE_NONE; /* * XXX we are called to process both MCS and legacy rates; * we must use the appropriate basic rate set or chaos will * ensue; for now callers that want MCS must supply * IEEE80211_F_DOBRS; at some point we'll need to split this * function so there are two variants, one for MCS and one * for legacy rates. */ if (flags & IEEE80211_F_DOBRS) srs = (const struct ieee80211_rateset *) ieee80211_get_suphtrates(ic, ni->ni_chan); else srs = ieee80211_get_suprates(ic, ni->ni_chan); for (i = 0; i < nrs->rs_nrates; ) { if (flags & IEEE80211_F_DOSORT) { /* * Sort rates. */ for (j = i + 1; j < nrs->rs_nrates; j++) { if (RV(nrs->rs_rates[i]) > RV(nrs->rs_rates[j])) { r = nrs->rs_rates[i]; nrs->rs_rates[i] = nrs->rs_rates[j]; nrs->rs_rates[j] = r; } } } r = nrs->rs_rates[i] & IEEE80211_RATE_VAL; badrate = r; /* * Check for fixed rate. */ if (r == ucastrate) fixedrate = r; /* * Check against supported rates. */ rix = findrix(srs, r); if (flags & IEEE80211_F_DONEGO) { if (rix < 0) { /* * A rate in the node's rate set is not * supported. If this is a basic rate and we * are operating as a STA then this is an error. * Otherwise we just discard/ignore the rate. */ if ((flags & IEEE80211_F_JOIN) && (nrs->rs_rates[i] & IEEE80211_RATE_BASIC)) error++; } else if ((flags & IEEE80211_F_JOIN) == 0) { /* * Overwrite with the supported rate * value so any basic rate bit is set. */ nrs->rs_rates[i] = srs->rs_rates[rix]; } } if ((flags & IEEE80211_F_DODEL) && rix < 0) { /* * Delete unacceptable rates. */ nrs->rs_nrates--; for (j = i; j < nrs->rs_nrates; j++) nrs->rs_rates[j] = nrs->rs_rates[j + 1]; nrs->rs_rates[j] = 0; continue; } if (rix >= 0) okrate = nrs->rs_rates[i]; i++; } if (okrate == 0 || error != 0 || ((flags & (IEEE80211_F_DOFRATE|IEEE80211_F_DOFMCS)) && fixedrate != ucastrate)) { IEEE80211_NOTE(vap, IEEE80211_MSG_XRATE | IEEE80211_MSG_11N, ni, "%s: flags 0x%x okrate %d error %d fixedrate 0x%x " "ucastrate %x\n", __func__, fixedrate, ucastrate, flags); return badrate | IEEE80211_RATE_BASIC; } else return RV(okrate); #undef RV } /* * Reset 11g-related state. */ void ieee80211_reset_erp(struct ieee80211com *ic) { ic->ic_flags &= ~IEEE80211_F_USEPROT; ic->ic_nonerpsta = 0; ic->ic_longslotsta = 0; /* * Short slot time is enabled only when operating in 11g * and not in an IBSS. We must also honor whether or not * the driver is capable of doing it. */ ieee80211_set_shortslottime(ic, IEEE80211_IS_CHAN_A(ic->ic_curchan) || IEEE80211_IS_CHAN_HT(ic->ic_curchan) || (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) && ic->ic_opmode == IEEE80211_M_HOSTAP && (ic->ic_caps & IEEE80211_C_SHSLOT))); /* * Set short preamble and ERP barker-preamble flags. */ if (IEEE80211_IS_CHAN_A(ic->ic_curchan) || (ic->ic_caps & IEEE80211_C_SHPREAMBLE)) { ic->ic_flags |= IEEE80211_F_SHPREAMBLE; ic->ic_flags &= ~IEEE80211_F_USEBARKER; } else { ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE; ic->ic_flags |= IEEE80211_F_USEBARKER; } } /* * Set the short slot time state and notify the driver. */ void ieee80211_set_shortslottime(struct ieee80211com *ic, int onoff) { if (onoff) ic->ic_flags |= IEEE80211_F_SHSLOT; else ic->ic_flags &= ~IEEE80211_F_SHSLOT; /* notify driver */ if (ic->ic_updateslot != NULL) ic->ic_updateslot(ic->ic_ifp); } /* * Check if the specified rate set supports ERP. * NB: the rate set is assumed to be sorted. */ int ieee80211_iserp_rateset(const struct ieee80211_rateset *rs) { static const int rates[] = { 2, 4, 11, 22, 12, 24, 48 }; int i, j; if (rs->rs_nrates < nitems(rates)) return 0; for (i = 0; i < nitems(rates); i++) { for (j = 0; j < rs->rs_nrates; j++) { int r = rs->rs_rates[j] & IEEE80211_RATE_VAL; if (rates[i] == r) goto next; if (r > rates[i]) return 0; } return 0; next: ; } return 1; } /* * Mark the basic rates for the rate table based on the * operating mode. For real 11g we mark all the 11b rates * and 6, 12, and 24 OFDM. For 11b compatibility we mark only * 11b rates. There's also a pseudo 11a-mode used to mark only * the basic OFDM rates. */ static void setbasicrates(struct ieee80211_rateset *rs, enum ieee80211_phymode mode, int add) { static const struct ieee80211_rateset basic[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_11A] = { 3, { 12, 24, 48 } }, [IEEE80211_MODE_11B] = { 2, { 2, 4 } }, /* NB: mixed b/g */ [IEEE80211_MODE_11G] = { 4, { 2, 4, 11, 22 } }, [IEEE80211_MODE_TURBO_A] = { 3, { 12, 24, 48 } }, [IEEE80211_MODE_TURBO_G] = { 4, { 2, 4, 11, 22 } }, [IEEE80211_MODE_STURBO_A] = { 3, { 12, 24, 48 } }, [IEEE80211_MODE_HALF] = { 3, { 6, 12, 24 } }, [IEEE80211_MODE_QUARTER] = { 3, { 3, 6, 12 } }, [IEEE80211_MODE_11NA] = { 3, { 12, 24, 48 } }, /* NB: mixed b/g */ [IEEE80211_MODE_11NG] = { 4, { 2, 4, 11, 22 } }, }; int i, j; for (i = 0; i < rs->rs_nrates; i++) { if (!add) rs->rs_rates[i] &= IEEE80211_RATE_VAL; for (j = 0; j < basic[mode].rs_nrates; j++) if (basic[mode].rs_rates[j] == rs->rs_rates[i]) { rs->rs_rates[i] |= IEEE80211_RATE_BASIC; break; } } } /* * Set the basic rates in a rate set. */ void ieee80211_setbasicrates(struct ieee80211_rateset *rs, enum ieee80211_phymode mode) { setbasicrates(rs, mode, 0); } /* * Add basic rates to a rate set. */ void ieee80211_addbasicrates(struct ieee80211_rateset *rs, enum ieee80211_phymode mode) { setbasicrates(rs, mode, 1); } /* * WME protocol support. * * The default 11a/b/g/n parameters come from the WiFi Alliance WMM * System Interopability Test Plan (v1.4, Appendix F) and the 802.11n * Draft 2.0 Test Plan (Appendix D). * * Static/Dynamic Turbo mode settings come from Atheros. */ typedef struct phyParamType { uint8_t aifsn; uint8_t logcwmin; uint8_t logcwmax; uint16_t txopLimit; uint8_t acm; } paramType; static const struct phyParamType phyParamForAC_BE[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = { 3, 4, 6, 0, 0 }, [IEEE80211_MODE_11A] = { 3, 4, 6, 0, 0 }, [IEEE80211_MODE_11B] = { 3, 4, 6, 0, 0 }, [IEEE80211_MODE_11G] = { 3, 4, 6, 0, 0 }, [IEEE80211_MODE_FH] = { 3, 4, 6, 0, 0 }, [IEEE80211_MODE_TURBO_A]= { 2, 3, 5, 0, 0 }, [IEEE80211_MODE_TURBO_G]= { 2, 3, 5, 0, 0 }, [IEEE80211_MODE_STURBO_A]={ 2, 3, 5, 0, 0 }, [IEEE80211_MODE_HALF] = { 3, 4, 6, 0, 0 }, [IEEE80211_MODE_QUARTER]= { 3, 4, 6, 0, 0 }, [IEEE80211_MODE_11NA] = { 3, 4, 6, 0, 0 }, [IEEE80211_MODE_11NG] = { 3, 4, 6, 0, 0 }, }; static const struct phyParamType phyParamForAC_BK[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = { 7, 4, 10, 0, 0 }, [IEEE80211_MODE_11A] = { 7, 4, 10, 0, 0 }, [IEEE80211_MODE_11B] = { 7, 4, 10, 0, 0 }, [IEEE80211_MODE_11G] = { 7, 4, 10, 0, 0 }, [IEEE80211_MODE_FH] = { 7, 4, 10, 0, 0 }, [IEEE80211_MODE_TURBO_A]= { 7, 3, 10, 0, 0 }, [IEEE80211_MODE_TURBO_G]= { 7, 3, 10, 0, 0 }, [IEEE80211_MODE_STURBO_A]={ 7, 3, 10, 0, 0 }, [IEEE80211_MODE_HALF] = { 7, 4, 10, 0, 0 }, [IEEE80211_MODE_QUARTER]= { 7, 4, 10, 0, 0 }, [IEEE80211_MODE_11NA] = { 7, 4, 10, 0, 0 }, [IEEE80211_MODE_11NG] = { 7, 4, 10, 0, 0 }, }; static const struct phyParamType phyParamForAC_VI[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = { 1, 3, 4, 94, 0 }, [IEEE80211_MODE_11A] = { 1, 3, 4, 94, 0 }, [IEEE80211_MODE_11B] = { 1, 3, 4, 188, 0 }, [IEEE80211_MODE_11G] = { 1, 3, 4, 94, 0 }, [IEEE80211_MODE_FH] = { 1, 3, 4, 188, 0 }, [IEEE80211_MODE_TURBO_A]= { 1, 2, 3, 94, 0 }, [IEEE80211_MODE_TURBO_G]= { 1, 2, 3, 94, 0 }, [IEEE80211_MODE_STURBO_A]={ 1, 2, 3, 94, 0 }, [IEEE80211_MODE_HALF] = { 1, 3, 4, 94, 0 }, [IEEE80211_MODE_QUARTER]= { 1, 3, 4, 94, 0 }, [IEEE80211_MODE_11NA] = { 1, 3, 4, 94, 0 }, [IEEE80211_MODE_11NG] = { 1, 3, 4, 94, 0 }, }; static const struct phyParamType phyParamForAC_VO[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = { 1, 2, 3, 47, 0 }, [IEEE80211_MODE_11A] = { 1, 2, 3, 47, 0 }, [IEEE80211_MODE_11B] = { 1, 2, 3, 102, 0 }, [IEEE80211_MODE_11G] = { 1, 2, 3, 47, 0 }, [IEEE80211_MODE_FH] = { 1, 2, 3, 102, 0 }, [IEEE80211_MODE_TURBO_A]= { 1, 2, 2, 47, 0 }, [IEEE80211_MODE_TURBO_G]= { 1, 2, 2, 47, 0 }, [IEEE80211_MODE_STURBO_A]={ 1, 2, 2, 47, 0 }, [IEEE80211_MODE_HALF] = { 1, 2, 3, 47, 0 }, [IEEE80211_MODE_QUARTER]= { 1, 2, 3, 47, 0 }, [IEEE80211_MODE_11NA] = { 1, 2, 3, 47, 0 }, [IEEE80211_MODE_11NG] = { 1, 2, 3, 47, 0 }, }; static const struct phyParamType bssPhyParamForAC_BE[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = { 3, 4, 10, 0, 0 }, [IEEE80211_MODE_11A] = { 3, 4, 10, 0, 0 }, [IEEE80211_MODE_11B] = { 3, 4, 10, 0, 0 }, [IEEE80211_MODE_11G] = { 3, 4, 10, 0, 0 }, [IEEE80211_MODE_FH] = { 3, 4, 10, 0, 0 }, [IEEE80211_MODE_TURBO_A]= { 2, 3, 10, 0, 0 }, [IEEE80211_MODE_TURBO_G]= { 2, 3, 10, 0, 0 }, [IEEE80211_MODE_STURBO_A]={ 2, 3, 10, 0, 0 }, [IEEE80211_MODE_HALF] = { 3, 4, 10, 0, 0 }, [IEEE80211_MODE_QUARTER]= { 3, 4, 10, 0, 0 }, [IEEE80211_MODE_11NA] = { 3, 4, 10, 0, 0 }, [IEEE80211_MODE_11NG] = { 3, 4, 10, 0, 0 }, }; static const struct phyParamType bssPhyParamForAC_VI[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = { 2, 3, 4, 94, 0 }, [IEEE80211_MODE_11A] = { 2, 3, 4, 94, 0 }, [IEEE80211_MODE_11B] = { 2, 3, 4, 188, 0 }, [IEEE80211_MODE_11G] = { 2, 3, 4, 94, 0 }, [IEEE80211_MODE_FH] = { 2, 3, 4, 188, 0 }, [IEEE80211_MODE_TURBO_A]= { 2, 2, 3, 94, 0 }, [IEEE80211_MODE_TURBO_G]= { 2, 2, 3, 94, 0 }, [IEEE80211_MODE_STURBO_A]={ 2, 2, 3, 94, 0 }, [IEEE80211_MODE_HALF] = { 2, 3, 4, 94, 0 }, [IEEE80211_MODE_QUARTER]= { 2, 3, 4, 94, 0 }, [IEEE80211_MODE_11NA] = { 2, 3, 4, 94, 0 }, [IEEE80211_MODE_11NG] = { 2, 3, 4, 94, 0 }, }; static const struct phyParamType bssPhyParamForAC_VO[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = { 2, 2, 3, 47, 0 }, [IEEE80211_MODE_11A] = { 2, 2, 3, 47, 0 }, [IEEE80211_MODE_11B] = { 2, 2, 3, 102, 0 }, [IEEE80211_MODE_11G] = { 2, 2, 3, 47, 0 }, [IEEE80211_MODE_FH] = { 2, 2, 3, 102, 0 }, [IEEE80211_MODE_TURBO_A]= { 1, 2, 2, 47, 0 }, [IEEE80211_MODE_TURBO_G]= { 1, 2, 2, 47, 0 }, [IEEE80211_MODE_STURBO_A]={ 1, 2, 2, 47, 0 }, [IEEE80211_MODE_HALF] = { 2, 2, 3, 47, 0 }, [IEEE80211_MODE_QUARTER]= { 2, 2, 3, 47, 0 }, [IEEE80211_MODE_11NA] = { 2, 2, 3, 47, 0 }, [IEEE80211_MODE_11NG] = { 2, 2, 3, 47, 0 }, }; static void _setifsparams(struct wmeParams *wmep, const paramType *phy) { wmep->wmep_aifsn = phy->aifsn; wmep->wmep_logcwmin = phy->logcwmin; wmep->wmep_logcwmax = phy->logcwmax; wmep->wmep_txopLimit = phy->txopLimit; } static void setwmeparams(struct ieee80211vap *vap, const char *type, int ac, struct wmeParams *wmep, const paramType *phy) { wmep->wmep_acm = phy->acm; _setifsparams(wmep, phy); IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, "set %s (%s) [acm %u aifsn %u logcwmin %u logcwmax %u txop %u]\n", ieee80211_wme_acnames[ac], type, wmep->wmep_acm, wmep->wmep_aifsn, wmep->wmep_logcwmin, wmep->wmep_logcwmax, wmep->wmep_txopLimit); } static void ieee80211_wme_initparams_locked(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_wme_state *wme = &ic->ic_wme; const paramType *pPhyParam, *pBssPhyParam; struct wmeParams *wmep; enum ieee80211_phymode mode; int i; IEEE80211_LOCK_ASSERT(ic); if ((ic->ic_caps & IEEE80211_C_WME) == 0 || ic->ic_nrunning > 1) return; /* * Clear the wme cap_info field so a qoscount from a previous * vap doesn't confuse later code which only parses the beacon * field and updates hardware when said field changes. * Otherwise the hardware is programmed with defaults, not what * the beacon actually announces. */ wme->wme_wmeChanParams.cap_info = 0; /* * Select mode; we can be called early in which case we * always use auto mode. We know we'll be called when * entering the RUN state with bsschan setup properly * so state will eventually get set correctly */ if (ic->ic_bsschan != IEEE80211_CHAN_ANYC) mode = ieee80211_chan2mode(ic->ic_bsschan); else mode = IEEE80211_MODE_AUTO; for (i = 0; i < WME_NUM_AC; i++) { switch (i) { case WME_AC_BK: pPhyParam = &phyParamForAC_BK[mode]; pBssPhyParam = &phyParamForAC_BK[mode]; break; case WME_AC_VI: pPhyParam = &phyParamForAC_VI[mode]; pBssPhyParam = &bssPhyParamForAC_VI[mode]; break; case WME_AC_VO: pPhyParam = &phyParamForAC_VO[mode]; pBssPhyParam = &bssPhyParamForAC_VO[mode]; break; case WME_AC_BE: default: pPhyParam = &phyParamForAC_BE[mode]; pBssPhyParam = &bssPhyParamForAC_BE[mode]; break; } wmep = &wme->wme_wmeChanParams.cap_wmeParams[i]; if (ic->ic_opmode == IEEE80211_M_HOSTAP) { setwmeparams(vap, "chan", i, wmep, pPhyParam); } else { setwmeparams(vap, "chan", i, wmep, pBssPhyParam); } wmep = &wme->wme_wmeBssChanParams.cap_wmeParams[i]; setwmeparams(vap, "bss ", i, wmep, pBssPhyParam); } /* NB: check ic_bss to avoid NULL deref on initial attach */ if (vap->iv_bss != NULL) { /* * Calculate agressive mode switching threshold based * on beacon interval. This doesn't need locking since * we're only called before entering the RUN state at * which point we start sending beacon frames. */ wme->wme_hipri_switch_thresh = (HIGH_PRI_SWITCH_THRESH * vap->iv_bss->ni_intval) / 100; wme->wme_flags &= ~WME_F_AGGRMODE; ieee80211_wme_updateparams(vap); } } void ieee80211_wme_initparams(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; IEEE80211_LOCK(ic); ieee80211_wme_initparams_locked(vap); IEEE80211_UNLOCK(ic); } /* * Update WME parameters for ourself and the BSS. */ void ieee80211_wme_updateparams_locked(struct ieee80211vap *vap) { static const paramType aggrParam[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = { 2, 4, 10, 64, 0 }, [IEEE80211_MODE_11A] = { 2, 4, 10, 64, 0 }, [IEEE80211_MODE_11B] = { 2, 5, 10, 64, 0 }, [IEEE80211_MODE_11G] = { 2, 4, 10, 64, 0 }, [IEEE80211_MODE_FH] = { 2, 5, 10, 64, 0 }, [IEEE80211_MODE_TURBO_A] = { 1, 3, 10, 64, 0 }, [IEEE80211_MODE_TURBO_G] = { 1, 3, 10, 64, 0 }, [IEEE80211_MODE_STURBO_A] = { 1, 3, 10, 64, 0 }, [IEEE80211_MODE_HALF] = { 2, 4, 10, 64, 0 }, [IEEE80211_MODE_QUARTER] = { 2, 4, 10, 64, 0 }, [IEEE80211_MODE_11NA] = { 2, 4, 10, 64, 0 }, /* XXXcheck*/ [IEEE80211_MODE_11NG] = { 2, 4, 10, 64, 0 }, /* XXXcheck*/ }; struct ieee80211com *ic = vap->iv_ic; struct ieee80211_wme_state *wme = &ic->ic_wme; const struct wmeParams *wmep; struct wmeParams *chanp, *bssp; enum ieee80211_phymode mode; int i; int do_aggrmode = 0; /* * Set up the channel access parameters for the physical * device. First populate the configured settings. */ for (i = 0; i < WME_NUM_AC; i++) { chanp = &wme->wme_chanParams.cap_wmeParams[i]; wmep = &wme->wme_wmeChanParams.cap_wmeParams[i]; chanp->wmep_aifsn = wmep->wmep_aifsn; chanp->wmep_logcwmin = wmep->wmep_logcwmin; chanp->wmep_logcwmax = wmep->wmep_logcwmax; chanp->wmep_txopLimit = wmep->wmep_txopLimit; chanp = &wme->wme_bssChanParams.cap_wmeParams[i]; wmep = &wme->wme_wmeBssChanParams.cap_wmeParams[i]; chanp->wmep_aifsn = wmep->wmep_aifsn; chanp->wmep_logcwmin = wmep->wmep_logcwmin; chanp->wmep_logcwmax = wmep->wmep_logcwmax; chanp->wmep_txopLimit = wmep->wmep_txopLimit; } /* * Select mode; we can be called early in which case we * always use auto mode. We know we'll be called when * entering the RUN state with bsschan setup properly * so state will eventually get set correctly */ if (ic->ic_bsschan != IEEE80211_CHAN_ANYC) mode = ieee80211_chan2mode(ic->ic_bsschan); else mode = IEEE80211_MODE_AUTO; /* * This implements agressive mode as found in certain * vendors' AP's. When there is significant high * priority (VI/VO) traffic in the BSS throttle back BE * traffic by using conservative parameters. Otherwise * BE uses agressive params to optimize performance of * legacy/non-QoS traffic. */ /* Hostap? Only if aggressive mode is enabled */ if (vap->iv_opmode == IEEE80211_M_HOSTAP && (wme->wme_flags & WME_F_AGGRMODE) != 0) do_aggrmode = 1; /* * Station? Only if we're in a non-QoS BSS. */ else if ((vap->iv_opmode == IEEE80211_M_STA && (vap->iv_bss->ni_flags & IEEE80211_NODE_QOS) == 0)) do_aggrmode = 1; /* * IBSS? Only if we we have WME enabled. */ else if ((vap->iv_opmode == IEEE80211_M_IBSS) && (vap->iv_flags & IEEE80211_F_WME)) do_aggrmode = 1; /* * If WME is disabled on this VAP, default to aggressive mode * regardless of the configuration. */ if ((vap->iv_flags & IEEE80211_F_WME) == 0) do_aggrmode = 1; /* XXX WDS? */ /* XXX MBSS? */ if (do_aggrmode) { chanp = &wme->wme_chanParams.cap_wmeParams[WME_AC_BE]; bssp = &wme->wme_bssChanParams.cap_wmeParams[WME_AC_BE]; chanp->wmep_aifsn = bssp->wmep_aifsn = aggrParam[mode].aifsn; chanp->wmep_logcwmin = bssp->wmep_logcwmin = aggrParam[mode].logcwmin; chanp->wmep_logcwmax = bssp->wmep_logcwmax = aggrParam[mode].logcwmax; chanp->wmep_txopLimit = bssp->wmep_txopLimit = (vap->iv_flags & IEEE80211_F_BURST) ? aggrParam[mode].txopLimit : 0; IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, "update %s (chan+bss) [acm %u aifsn %u logcwmin %u " "logcwmax %u txop %u]\n", ieee80211_wme_acnames[WME_AC_BE], chanp->wmep_acm, chanp->wmep_aifsn, chanp->wmep_logcwmin, chanp->wmep_logcwmax, chanp->wmep_txopLimit); } /* * Change the contention window based on the number of associated * stations. If the number of associated stations is 1 and * aggressive mode is enabled, lower the contention window even * further. */ if (vap->iv_opmode == IEEE80211_M_HOSTAP && ic->ic_sta_assoc < 2 && (wme->wme_flags & WME_F_AGGRMODE) != 0) { static const uint8_t logCwMin[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = 3, [IEEE80211_MODE_11A] = 3, [IEEE80211_MODE_11B] = 4, [IEEE80211_MODE_11G] = 3, [IEEE80211_MODE_FH] = 4, [IEEE80211_MODE_TURBO_A] = 3, [IEEE80211_MODE_TURBO_G] = 3, [IEEE80211_MODE_STURBO_A] = 3, [IEEE80211_MODE_HALF] = 3, [IEEE80211_MODE_QUARTER] = 3, [IEEE80211_MODE_11NA] = 3, [IEEE80211_MODE_11NG] = 3, }; chanp = &wme->wme_chanParams.cap_wmeParams[WME_AC_BE]; bssp = &wme->wme_bssChanParams.cap_wmeParams[WME_AC_BE]; chanp->wmep_logcwmin = bssp->wmep_logcwmin = logCwMin[mode]; IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, "update %s (chan+bss) logcwmin %u\n", ieee80211_wme_acnames[WME_AC_BE], chanp->wmep_logcwmin); } /* * Arrange for the beacon update. * * XXX what about MBSS, WDS? */ if (vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_IBSS) { /* * Arrange for a beacon update and bump the parameter * set number so associated stations load the new values. */ wme->wme_bssChanParams.cap_info = (wme->wme_bssChanParams.cap_info+1) & WME_QOSINFO_COUNT; ieee80211_beacon_notify(vap, IEEE80211_BEACON_WME); } wme->wme_update(ic); IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, "%s: WME params updated, cap_info 0x%x\n", __func__, vap->iv_opmode == IEEE80211_M_STA ? wme->wme_wmeChanParams.cap_info : wme->wme_bssChanParams.cap_info); } void ieee80211_wme_updateparams(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; if (ic->ic_caps & IEEE80211_C_WME) { IEEE80211_LOCK(ic); ieee80211_wme_updateparams_locked(vap); IEEE80211_UNLOCK(ic); } } static void parent_updown(void *arg, int npending) { struct ifnet *parent = arg; parent->if_ioctl(parent, SIOCSIFFLAGS, NULL); } static void update_mcast(void *arg, int npending) { struct ieee80211com *ic = arg; struct ifnet *parent = ic->ic_ifp; ic->ic_update_mcast(parent); } static void update_promisc(void *arg, int npending) { struct ieee80211com *ic = arg; struct ifnet *parent = ic->ic_ifp; ic->ic_update_promisc(parent); } static void update_channel(void *arg, int npending) { struct ieee80211com *ic = arg; ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); } static void update_chw(void *arg, int npending) { struct ieee80211com *ic = arg; /* * XXX should we defer the channel width _config_ update until now? */ ic->ic_update_chw(ic); } /* * Block until the parent is in a known state. This is * used after any operations that dispatch a task (e.g. * to auto-configure the parent device up/down). */ void ieee80211_waitfor_parent(struct ieee80211com *ic) { taskqueue_block(ic->ic_tq); ieee80211_draintask(ic, &ic->ic_parent_task); ieee80211_draintask(ic, &ic->ic_mcast_task); ieee80211_draintask(ic, &ic->ic_promisc_task); ieee80211_draintask(ic, &ic->ic_chan_task); ieee80211_draintask(ic, &ic->ic_bmiss_task); ieee80211_draintask(ic, &ic->ic_chw_task); taskqueue_unblock(ic->ic_tq); } /* * Start a vap running. If this is the first vap to be * set running on the underlying device then we * automatically bring the device up. */ void ieee80211_start_locked(struct ieee80211vap *vap) { struct ifnet *ifp = vap->iv_ifp; struct ieee80211com *ic = vap->iv_ic; struct ifnet *parent = ic->ic_ifp; IEEE80211_LOCK_ASSERT(ic); IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, "start running, %d vaps running\n", ic->ic_nrunning); if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { /* * Mark us running. Note that it's ok to do this first; * if we need to bring the parent device up we defer that * to avoid dropping the com lock. We expect the device * to respond to being marked up by calling back into us * through ieee80211_start_all at which point we'll come * back in here and complete the work. */ ifp->if_drv_flags |= IFF_DRV_RUNNING; /* * We are not running; if this we are the first vap * to be brought up auto-up the parent if necessary. */ if (ic->ic_nrunning++ == 0 && (parent->if_drv_flags & IFF_DRV_RUNNING) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, "%s: up parent %s\n", __func__, parent->if_xname); parent->if_flags |= IFF_UP; ieee80211_runtask(ic, &ic->ic_parent_task); return; } } /* * If the parent is up and running, then kick the * 802.11 state machine as appropriate. */ if ((parent->if_drv_flags & IFF_DRV_RUNNING) && vap->iv_roaming != IEEE80211_ROAMING_MANUAL) { if (vap->iv_opmode == IEEE80211_M_STA) { #if 0 /* XXX bypasses scan too easily; disable for now */ /* * Try to be intelligent about clocking the state * machine. If we're currently in RUN state then * we should be able to apply any new state/parameters * simply by re-associating. Otherwise we need to * re-scan to select an appropriate ap. */ if (vap->iv_state >= IEEE80211_S_RUN) ieee80211_new_state_locked(vap, IEEE80211_S_ASSOC, 1); else #endif ieee80211_new_state_locked(vap, IEEE80211_S_SCAN, 0); } else { /* * For monitor+wds mode there's nothing to do but * start running. Otherwise if this is the first * vap to be brought up, start a scan which may be * preempted if the station is locked to a particular * channel. */ vap->iv_flags_ext |= IEEE80211_FEXT_REINIT; if (vap->iv_opmode == IEEE80211_M_MONITOR || vap->iv_opmode == IEEE80211_M_WDS) ieee80211_new_state_locked(vap, IEEE80211_S_RUN, -1); else ieee80211_new_state_locked(vap, IEEE80211_S_SCAN, 0); } } } /* * Start a single vap. */ void ieee80211_init(void *arg) { struct ieee80211vap *vap = arg; IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, "%s\n", __func__); IEEE80211_LOCK(vap->iv_ic); ieee80211_start_locked(vap); IEEE80211_UNLOCK(vap->iv_ic); } /* * Start all runnable vap's on a device. */ void ieee80211_start_all(struct ieee80211com *ic) { struct ieee80211vap *vap; IEEE80211_LOCK(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { struct ifnet *ifp = vap->iv_ifp; if (IFNET_IS_UP_RUNNING(ifp)) /* NB: avoid recursion */ ieee80211_start_locked(vap); } IEEE80211_UNLOCK(ic); } /* * Stop a vap. We force it down using the state machine * then mark it's ifnet not running. If this is the last * vap running on the underlying device then we close it * too to insure it will be properly initialized when the * next vap is brought up. */ void ieee80211_stop_locked(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ifnet *ifp = vap->iv_ifp; struct ifnet *parent = ic->ic_ifp; IEEE80211_LOCK_ASSERT(ic); IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, "stop running, %d vaps running\n", ic->ic_nrunning); ieee80211_new_state_locked(vap, IEEE80211_S_INIT, -1); if (ifp->if_drv_flags & IFF_DRV_RUNNING) { ifp->if_drv_flags &= ~IFF_DRV_RUNNING; /* mark us stopped */ if (--ic->ic_nrunning == 0 && (parent->if_drv_flags & IFF_DRV_RUNNING)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, "down parent %s\n", parent->if_xname); parent->if_flags &= ~IFF_UP; ieee80211_runtask(ic, &ic->ic_parent_task); } } } void ieee80211_stop(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; IEEE80211_LOCK(ic); ieee80211_stop_locked(vap); IEEE80211_UNLOCK(ic); } /* * Stop all vap's running on a device. */ void ieee80211_stop_all(struct ieee80211com *ic) { struct ieee80211vap *vap; IEEE80211_LOCK(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { struct ifnet *ifp = vap->iv_ifp; if (IFNET_IS_UP_RUNNING(ifp)) /* NB: avoid recursion */ ieee80211_stop_locked(vap); } IEEE80211_UNLOCK(ic); ieee80211_waitfor_parent(ic); } /* * Stop all vap's running on a device and arrange * for those that were running to be resumed. */ void ieee80211_suspend_all(struct ieee80211com *ic) { struct ieee80211vap *vap; IEEE80211_LOCK(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { struct ifnet *ifp = vap->iv_ifp; if (IFNET_IS_UP_RUNNING(ifp)) { /* NB: avoid recursion */ vap->iv_flags_ext |= IEEE80211_FEXT_RESUME; ieee80211_stop_locked(vap); } } IEEE80211_UNLOCK(ic); ieee80211_waitfor_parent(ic); } /* * Start all vap's marked for resume. */ void ieee80211_resume_all(struct ieee80211com *ic) { struct ieee80211vap *vap; IEEE80211_LOCK(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { struct ifnet *ifp = vap->iv_ifp; if (!IFNET_IS_UP_RUNNING(ifp) && (vap->iv_flags_ext & IEEE80211_FEXT_RESUME)) { vap->iv_flags_ext &= ~IEEE80211_FEXT_RESUME; ieee80211_start_locked(vap); } } IEEE80211_UNLOCK(ic); } void ieee80211_beacon_miss(struct ieee80211com *ic) { IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { /* Process in a taskq, the handler may reenter the driver */ ieee80211_runtask(ic, &ic->ic_bmiss_task); } IEEE80211_UNLOCK(ic); } static void beacon_miss(void *arg, int npending) { struct ieee80211com *ic = arg; struct ieee80211vap *vap; IEEE80211_LOCK(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { /* * We only pass events through for sta vap's in RUN state; * may be too restrictive but for now this saves all the * handlers duplicating these checks. */ if (vap->iv_opmode == IEEE80211_M_STA && vap->iv_state >= IEEE80211_S_RUN && vap->iv_bmiss != NULL) vap->iv_bmiss(vap); } IEEE80211_UNLOCK(ic); } static void beacon_swmiss(void *arg, int npending) { struct ieee80211vap *vap = arg; struct ieee80211com *ic = vap->iv_ic; IEEE80211_LOCK(ic); if (vap->iv_state == IEEE80211_S_RUN) { /* XXX Call multiple times if npending > zero? */ vap->iv_bmiss(vap); } IEEE80211_UNLOCK(ic); } /* * Software beacon miss handling. Check if any beacons * were received in the last period. If not post a * beacon miss; otherwise reset the counter. */ void ieee80211_swbmiss(void *arg) { struct ieee80211vap *vap = arg; struct ieee80211com *ic = vap->iv_ic; IEEE80211_LOCK_ASSERT(ic); /* XXX sleep state? */ KASSERT(vap->iv_state == IEEE80211_S_RUN, ("wrong state %d", vap->iv_state)); if (ic->ic_flags & IEEE80211_F_SCAN) { /* * If scanning just ignore and reset state. If we get a * bmiss after coming out of scan because we haven't had * time to receive a beacon then we should probe the AP * before posting a real bmiss (unless iv_bmiss_max has * been artifiically lowered). A cleaner solution might * be to disable the timer on scan start/end but to handle * case of multiple sta vap's we'd need to disable the * timers of all affected vap's. */ vap->iv_swbmiss_count = 0; } else if (vap->iv_swbmiss_count == 0) { if (vap->iv_bmiss != NULL) ieee80211_runtask(ic, &vap->iv_swbmiss_task); } else vap->iv_swbmiss_count = 0; callout_reset(&vap->iv_swbmiss, vap->iv_swbmiss_period, ieee80211_swbmiss, vap); } /* * Start an 802.11h channel switch. We record the parameters, * mark the operation pending, notify each vap through the * beacon update mechanism so it can update the beacon frame * contents, and then switch vap's to CSA state to block outbound * traffic. Devices that handle CSA directly can use the state * switch to do the right thing so long as they call * ieee80211_csa_completeswitch when it's time to complete the * channel change. Devices that depend on the net80211 layer can * use ieee80211_beacon_update to handle the countdown and the * channel switch. */ void ieee80211_csa_startswitch(struct ieee80211com *ic, struct ieee80211_channel *c, int mode, int count) { struct ieee80211vap *vap; IEEE80211_LOCK_ASSERT(ic); ic->ic_csa_newchan = c; ic->ic_csa_mode = mode; ic->ic_csa_count = count; ic->ic_flags |= IEEE80211_F_CSAPENDING; TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { if (vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_IBSS || vap->iv_opmode == IEEE80211_M_MBSS) ieee80211_beacon_notify(vap, IEEE80211_BEACON_CSA); /* switch to CSA state to block outbound traffic */ if (vap->iv_state == IEEE80211_S_RUN) ieee80211_new_state_locked(vap, IEEE80211_S_CSA, 0); } ieee80211_notify_csa(ic, c, mode, count); } /* * Complete the channel switch by transitioning all CSA VAPs to RUN. * This is called by both the completion and cancellation functions * so each VAP is placed back in the RUN state and can thus transmit. */ static void csa_completeswitch(struct ieee80211com *ic) { struct ieee80211vap *vap; ic->ic_csa_newchan = NULL; ic->ic_flags &= ~IEEE80211_F_CSAPENDING; TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_state == IEEE80211_S_CSA) ieee80211_new_state_locked(vap, IEEE80211_S_RUN, 0); } /* * Complete an 802.11h channel switch started by ieee80211_csa_startswitch. * We clear state and move all vap's in CSA state to RUN state * so they can again transmit. * * Although this may not be completely correct, update the BSS channel * for each VAP to the newly configured channel. The setcurchan sets * the current operating channel for the interface (so the radio does * switch over) but the VAP BSS isn't updated, leading to incorrectly * reported information via ioctl. */ void ieee80211_csa_completeswitch(struct ieee80211com *ic) { struct ieee80211vap *vap; IEEE80211_LOCK_ASSERT(ic); KASSERT(ic->ic_flags & IEEE80211_F_CSAPENDING, ("csa not pending")); ieee80211_setcurchan(ic, ic->ic_csa_newchan); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_state == IEEE80211_S_CSA) vap->iv_bss->ni_chan = ic->ic_curchan; csa_completeswitch(ic); } /* * Cancel an 802.11h channel switch started by ieee80211_csa_startswitch. * We clear state and move all vap's in CSA state to RUN state * so they can again transmit. */ void ieee80211_csa_cancelswitch(struct ieee80211com *ic) { IEEE80211_LOCK_ASSERT(ic); csa_completeswitch(ic); } /* * Complete a DFS CAC started by ieee80211_dfs_cac_start. * We clear state and move all vap's in CAC state to RUN state. */ void ieee80211_cac_completeswitch(struct ieee80211vap *vap0) { struct ieee80211com *ic = vap0->iv_ic; struct ieee80211vap *vap; IEEE80211_LOCK(ic); /* * Complete CAC state change for lead vap first; then * clock all the other vap's waiting. */ KASSERT(vap0->iv_state == IEEE80211_S_CAC, ("wrong state %d", vap0->iv_state)); ieee80211_new_state_locked(vap0, IEEE80211_S_RUN, 0); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_state == IEEE80211_S_CAC) ieee80211_new_state_locked(vap, IEEE80211_S_RUN, 0); IEEE80211_UNLOCK(ic); } /* * Force all vap's other than the specified vap to the INIT state * and mark them as waiting for a scan to complete. These vaps * will be brought up when the scan completes and the scanning vap * reaches RUN state by wakeupwaiting. */ static void markwaiting(struct ieee80211vap *vap0) { struct ieee80211com *ic = vap0->iv_ic; struct ieee80211vap *vap; IEEE80211_LOCK_ASSERT(ic); /* * A vap list entry can not disappear since we are running on the * taskqueue and a vap destroy will queue and drain another state * change task. */ TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { if (vap == vap0) continue; if (vap->iv_state != IEEE80211_S_INIT) { /* NB: iv_newstate may drop the lock */ vap->iv_newstate(vap, IEEE80211_S_INIT, 0); IEEE80211_LOCK_ASSERT(ic); vap->iv_flags_ext |= IEEE80211_FEXT_SCANWAIT; } } } /* * Wakeup all vap's waiting for a scan to complete. This is the * companion to markwaiting (above) and is used to coordinate * multiple vaps scanning. * This is called from the state taskqueue. */ static void wakeupwaiting(struct ieee80211vap *vap0) { struct ieee80211com *ic = vap0->iv_ic; struct ieee80211vap *vap; IEEE80211_LOCK_ASSERT(ic); /* * A vap list entry can not disappear since we are running on the * taskqueue and a vap destroy will queue and drain another state * change task. */ TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { if (vap == vap0) continue; if (vap->iv_flags_ext & IEEE80211_FEXT_SCANWAIT) { vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANWAIT; /* NB: sta's cannot go INIT->RUN */ /* NB: iv_newstate may drop the lock */ vap->iv_newstate(vap, vap->iv_opmode == IEEE80211_M_STA ? IEEE80211_S_SCAN : IEEE80211_S_RUN, 0); IEEE80211_LOCK_ASSERT(ic); } } } /* * Handle post state change work common to all operating modes. */ static void ieee80211_newstate_cb(void *xvap, int npending) { struct ieee80211vap *vap = xvap; struct ieee80211com *ic = vap->iv_ic; enum ieee80211_state nstate, ostate; int arg, rc; IEEE80211_LOCK(ic); nstate = vap->iv_nstate; arg = vap->iv_nstate_arg; if (vap->iv_flags_ext & IEEE80211_FEXT_REINIT) { /* * We have been requested to drop back to the INIT before * proceeding to the new state. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s arg %d\n", __func__, ieee80211_state_name[vap->iv_state], ieee80211_state_name[IEEE80211_S_INIT], arg); vap->iv_newstate(vap, IEEE80211_S_INIT, arg); IEEE80211_LOCK_ASSERT(ic); vap->iv_flags_ext &= ~IEEE80211_FEXT_REINIT; } ostate = vap->iv_state; if (nstate == IEEE80211_S_SCAN && ostate != IEEE80211_S_INIT) { /* * SCAN was forced; e.g. on beacon miss. Force other running * vap's to INIT state and mark them as waiting for the scan to * complete. This insures they don't interfere with our * scanning. Since we are single threaded the vaps can not * transition again while we are executing. * * XXX not always right, assumes ap follows sta */ markwaiting(vap); } IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s arg %d\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate], arg); rc = vap->iv_newstate(vap, nstate, arg); IEEE80211_LOCK_ASSERT(ic); vap->iv_flags_ext &= ~IEEE80211_FEXT_STATEWAIT; if (rc != 0) { /* State transition failed */ KASSERT(rc != EINPROGRESS, ("iv_newstate was deferred")); KASSERT(nstate != IEEE80211_S_INIT, ("INIT state change failed")); IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s returned error %d\n", __func__, ieee80211_state_name[nstate], rc); goto done; } /* No actual transition, skip post processing */ if (ostate == nstate) goto done; if (nstate == IEEE80211_S_RUN) { /* * OACTIVE may be set on the vap if the upper layer * tried to transmit (e.g. IPv6 NDP) before we reach * RUN state. Clear it and restart xmit. * * Note this can also happen as a result of SLEEP->RUN * (i.e. coming out of power save mode). */ vap->iv_ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; /* * XXX TODO Kick-start a VAP queue - this should be a method! */ /* bring up any vaps waiting on us */ wakeupwaiting(vap); } else if (nstate == IEEE80211_S_INIT) { /* * Flush the scan cache if we did the last scan (XXX?) * and flush any frames on send queues from this vap. * Note the mgt q is used only for legacy drivers and * will go away shortly. */ ieee80211_scan_flush(vap); /* * XXX TODO: ic/vap queue flush */ } done: IEEE80211_UNLOCK(ic); } /* * Public interface for initiating a state machine change. * This routine single-threads the request and coordinates * the scheduling of multiple vaps for the purpose of selecting * an operating channel. Specifically the following scenarios * are handled: * o only one vap can be selecting a channel so on transition to * SCAN state if another vap is already scanning then * mark the caller for later processing and return without * doing anything (XXX? expectations by caller of synchronous operation) * o only one vap can be doing CAC of a channel so on transition to * CAC state if another vap is already scanning for radar then * mark the caller for later processing and return without * doing anything (XXX? expectations by caller of synchronous operation) * o if another vap is already running when a request is made * to SCAN then an operating channel has been chosen; bypass * the scan and just join the channel * * Note that the state change call is done through the iv_newstate * method pointer so any driver routine gets invoked. The driver * will normally call back into operating mode-specific * ieee80211_newstate routines (below) unless it needs to completely * bypass the state machine (e.g. because the firmware has it's * own idea how things should work). Bypassing the net80211 layer * is usually a mistake and indicates lack of proper integration * with the net80211 layer. */ int ieee80211_new_state_locked(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211vap *vp; enum ieee80211_state ostate; int nrunning, nscanning; IEEE80211_LOCK_ASSERT(ic); if (vap->iv_flags_ext & IEEE80211_FEXT_STATEWAIT) { if (vap->iv_nstate == IEEE80211_S_INIT) { /* * XXX The vap is being stopped, do no allow any other * state changes until this is completed. */ return -1; } else if (vap->iv_state != vap->iv_nstate) { #if 0 /* Warn if the previous state hasn't completed. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: pending %s -> %s transition lost\n", __func__, ieee80211_state_name[vap->iv_state], ieee80211_state_name[vap->iv_nstate]); #else /* XXX temporarily enable to identify issues */ if_printf(vap->iv_ifp, "%s: pending %s -> %s transition lost\n", __func__, ieee80211_state_name[vap->iv_state], ieee80211_state_name[vap->iv_nstate]); #endif } } nrunning = nscanning = 0; /* XXX can track this state instead of calculating */ TAILQ_FOREACH(vp, &ic->ic_vaps, iv_next) { if (vp != vap) { if (vp->iv_state >= IEEE80211_S_RUN) nrunning++; /* XXX doesn't handle bg scan */ /* NB: CAC+AUTH+ASSOC treated like SCAN */ else if (vp->iv_state > IEEE80211_S_INIT) nscanning++; } } ostate = vap->iv_state; IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (nrunning %d nscanning %d)\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate], nrunning, nscanning); switch (nstate) { case IEEE80211_S_SCAN: if (ostate == IEEE80211_S_INIT) { /* * INIT -> SCAN happens on initial bringup. */ KASSERT(!(nscanning && nrunning), ("%d scanning and %d running", nscanning, nrunning)); if (nscanning) { /* * Someone is scanning, defer our state * change until the work has completed. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: defer %s -> %s\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate]); vap->iv_flags_ext |= IEEE80211_FEXT_SCANWAIT; return 0; } if (nrunning) { /* * Someone is operating; just join the channel * they have chosen. */ /* XXX kill arg? */ /* XXX check each opmode, adhoc? */ if (vap->iv_opmode == IEEE80211_M_STA) nstate = IEEE80211_S_SCAN; else nstate = IEEE80211_S_RUN; #ifdef IEEE80211_DEBUG if (nstate != IEEE80211_S_SCAN) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: override, now %s -> %s\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate]); } #endif } } break; case IEEE80211_S_RUN: if (vap->iv_opmode == IEEE80211_M_WDS && (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) && nscanning) { /* * Legacy WDS with someone else scanning; don't * go online until that completes as we should * follow the other vap to the channel they choose. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: defer %s -> %s (legacy WDS)\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate]); vap->iv_flags_ext |= IEEE80211_FEXT_SCANWAIT; return 0; } if (vap->iv_opmode == IEEE80211_M_HOSTAP && IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) && (vap->iv_flags_ext & IEEE80211_FEXT_DFS) && !IEEE80211_IS_CHAN_CACDONE(ic->ic_bsschan)) { /* * This is a DFS channel, transition to CAC state * instead of RUN. This allows us to initiate * Channel Availability Check (CAC) as specified * by 11h/DFS. */ nstate = IEEE80211_S_CAC; IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: override %s -> %s (DFS)\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate]); } break; case IEEE80211_S_INIT: /* cancel any scan in progress */ ieee80211_cancel_scan(vap); if (ostate == IEEE80211_S_INIT ) { /* XXX don't believe this */ /* INIT -> INIT. nothing to do */ vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANWAIT; } /* fall thru... */ default: break; } /* defer the state change to a thread */ vap->iv_nstate = nstate; vap->iv_nstate_arg = arg; vap->iv_flags_ext |= IEEE80211_FEXT_STATEWAIT; ieee80211_runtask(ic, &vap->iv_nstate_task); return EINPROGRESS; } int ieee80211_new_state(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct ieee80211com *ic = vap->iv_ic; int rc; IEEE80211_LOCK(ic); rc = ieee80211_new_state_locked(vap, nstate, arg); IEEE80211_UNLOCK(ic); return rc; } Index: head/sys/net80211/ieee80211_radiotap.c =================================================================== --- head/sys/net80211/ieee80211_radiotap.c (revision 283528) +++ head/sys/net80211/ieee80211_radiotap.c (revision 283529) @@ -1,375 +1,375 @@ /*- * Copyright (c) 2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 radiotap support. */ #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include static int radiotap_offset(struct ieee80211_radiotap_header *, int, int); void ieee80211_radiotap_attach(struct ieee80211com *ic, struct ieee80211_radiotap_header *th, int tlen, uint32_t tx_radiotap, struct ieee80211_radiotap_header *rh, int rlen, uint32_t rx_radiotap) { ieee80211_radiotap_attachv(ic, th, tlen, 0, tx_radiotap, rh, rlen, 0, rx_radiotap); } void ieee80211_radiotap_attachv(struct ieee80211com *ic, struct ieee80211_radiotap_header *th, int tlen, int n_tx_v, uint32_t tx_radiotap, struct ieee80211_radiotap_header *rh, int rlen, int n_rx_v, uint32_t rx_radiotap) { #define B(_v) (1<<(_v)) int off; th->it_len = htole16(roundup2(tlen, sizeof(uint32_t))); th->it_present = htole32(tx_radiotap); ic->ic_th = th; /* calculate offset to channel data */ off = -1; if (tx_radiotap & B(IEEE80211_RADIOTAP_CHANNEL)) off = radiotap_offset(th, n_tx_v, IEEE80211_RADIOTAP_CHANNEL); else if (tx_radiotap & B(IEEE80211_RADIOTAP_XCHANNEL)) off = radiotap_offset(th, n_tx_v, IEEE80211_RADIOTAP_XCHANNEL); if (off == -1) { - if_printf(ic->ic_ifp, "%s: no tx channel, radiotap 0x%x\n", - __func__, tx_radiotap); + ic_printf(ic, "%s: no tx channel, radiotap 0x%x\n", __func__, + tx_radiotap); /* NB: we handle this case but data will have no chan spec */ } else ic->ic_txchan = ((uint8_t *) th) + off; rh->it_len = htole16(roundup2(rlen, sizeof(uint32_t))); rh->it_present = htole32(rx_radiotap); ic->ic_rh = rh; /* calculate offset to channel data */ off = -1; if (rx_radiotap & B(IEEE80211_RADIOTAP_CHANNEL)) off = radiotap_offset(rh, n_rx_v, IEEE80211_RADIOTAP_CHANNEL); else if (rx_radiotap & B(IEEE80211_RADIOTAP_XCHANNEL)) off = radiotap_offset(rh, n_rx_v, IEEE80211_RADIOTAP_XCHANNEL); if (off == -1) { - if_printf(ic->ic_ifp, "%s: no rx channel, radiotap 0x%x\n", - __func__, rx_radiotap); + ic_printf(ic, "%s: no rx channel, radiotap 0x%x\n", __func__, + rx_radiotap); /* NB: we handle this case but data will have no chan spec */ } else ic->ic_rxchan = ((uint8_t *) rh) + off; #undef B } void ieee80211_radiotap_detach(struct ieee80211com *ic) { } void ieee80211_radiotap_vattach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_radiotap_header *th = ic->ic_th; if (th != NULL && ic->ic_rh != NULL) { /* radiotap DLT for raw 802.11 frames */ bpfattach2(vap->iv_ifp, DLT_IEEE802_11_RADIO, sizeof(struct ieee80211_frame) + le16toh(th->it_len), &vap->iv_rawbpf); } } void ieee80211_radiotap_vdetach(struct ieee80211vap *vap) { /* NB: bpfattach is called by ether_ifdetach and claims all taps */ } static void set_channel(void *p, const struct ieee80211_channel *c) { struct { uint16_t freq; uint16_t flags; } *rc = p; rc->freq = htole16(c->ic_freq); rc->flags = htole16(c->ic_flags); } static void set_xchannel(void *p, const struct ieee80211_channel *c) { struct { uint32_t flags; uint16_t freq; uint8_t ieee; uint8_t maxpow; } *rc = p; rc->flags = htole32(c->ic_flags); rc->freq = htole16(c->ic_freq); rc->ieee = c->ic_ieee; rc->maxpow = c->ic_maxregpower; } /* * Update radiotap state on channel change. */ void ieee80211_radiotap_chan_change(struct ieee80211com *ic) { if (ic->ic_rxchan != NULL) { struct ieee80211_radiotap_header *rh = ic->ic_rh; if (rh->it_present & htole32(1<ic_rxchan, ic->ic_curchan); else if (rh->it_present & htole32(1<ic_rxchan, ic->ic_curchan); } if (ic->ic_txchan != NULL) { struct ieee80211_radiotap_header *th = ic->ic_th; if (th->it_present & htole32(1<ic_txchan, ic->ic_curchan); else if (th->it_present & htole32(1<ic_txchan, ic->ic_curchan); } } /* * Distribute radiotap data (+packet) to all monitor mode * vaps with an active tap other than vap0. */ static void spam_vaps(struct ieee80211vap *vap0, struct mbuf *m, struct ieee80211_radiotap_header *rh, int len) { struct ieee80211com *ic = vap0->iv_ic; struct ieee80211vap *vap; TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { if (vap != vap0 && vap->iv_opmode == IEEE80211_M_MONITOR && (vap->iv_flags_ext & IEEE80211_FEXT_BPF) && vap->iv_state != IEEE80211_S_INIT) bpf_mtap2(vap->iv_rawbpf, rh, len, m); } } /* * Dispatch radiotap data for transmitted packet. */ void ieee80211_radiotap_tx(struct ieee80211vap *vap0, struct mbuf *m) { struct ieee80211com *ic = vap0->iv_ic; struct ieee80211_radiotap_header *th = ic->ic_th; int len; KASSERT(th != NULL, ("no tx radiotap header")); len = le16toh(th->it_len); if (vap0->iv_flags_ext & IEEE80211_FEXT_BPF) bpf_mtap2(vap0->iv_rawbpf, th, len, m); /* * Spam monitor mode vaps. */ if (ic->ic_montaps != 0) spam_vaps(vap0, m, th, len); } /* * Dispatch radiotap data for received packet. */ void ieee80211_radiotap_rx(struct ieee80211vap *vap0, struct mbuf *m) { struct ieee80211com *ic = vap0->iv_ic; struct ieee80211_radiotap_header *rh = ic->ic_rh; int len; KASSERT(rh != NULL, ("no rx radiotap header")); len = le16toh(rh->it_len); if (vap0->iv_flags_ext & IEEE80211_FEXT_BPF) bpf_mtap2(vap0->iv_rawbpf, rh, len, m); /* * Spam monitor mode vaps with unicast frames. Multicast * frames are handled by passing through ieee80211_input_all * which distributes copies to the monitor mode vaps. */ if (ic->ic_montaps != 0 && (m->m_flags & M_BCAST) == 0) spam_vaps(vap0, m, rh, len); } /* * Dispatch radiotap data for a packet received outside the normal * rx processing path; this is used, for example, to handle frames * received with errors that would otherwise be dropped. */ void ieee80211_radiotap_rx_all(struct ieee80211com *ic, struct mbuf *m) { struct ieee80211_radiotap_header *rh = ic->ic_rh; int len = le16toh(rh->it_len); struct ieee80211vap *vap; /* XXX locking? */ TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { if (ieee80211_radiotap_active_vap(vap) && vap->iv_state != IEEE80211_S_INIT) bpf_mtap2(vap->iv_rawbpf, rh, len, m); } } /* * Return the offset of the specified item in the radiotap * header description. If the item is not present or is not * known -1 is returned. */ static int radiotap_offset(struct ieee80211_radiotap_header *rh, int n_vendor_attributes, int item) { static const struct { size_t align, width; } items[] = { [IEEE80211_RADIOTAP_TSFT] = { .align = sizeof(uint64_t), .width = sizeof(uint64_t), }, [IEEE80211_RADIOTAP_FLAGS] = { .align = sizeof(uint8_t), .width = sizeof(uint8_t), }, [IEEE80211_RADIOTAP_RATE] = { .align = sizeof(uint8_t), .width = sizeof(uint8_t), }, [IEEE80211_RADIOTAP_CHANNEL] = { .align = sizeof(uint16_t), .width = 2*sizeof(uint16_t), }, [IEEE80211_RADIOTAP_FHSS] = { .align = sizeof(uint16_t), .width = sizeof(uint16_t), }, [IEEE80211_RADIOTAP_DBM_ANTSIGNAL] = { .align = sizeof(uint8_t), .width = sizeof(uint8_t), }, [IEEE80211_RADIOTAP_DBM_ANTNOISE] = { .align = sizeof(uint8_t), .width = sizeof(uint8_t), }, [IEEE80211_RADIOTAP_LOCK_QUALITY] = { .align = sizeof(uint16_t), .width = sizeof(uint16_t), }, [IEEE80211_RADIOTAP_TX_ATTENUATION] = { .align = sizeof(uint16_t), .width = sizeof(uint16_t), }, [IEEE80211_RADIOTAP_DB_TX_ATTENUATION] = { .align = sizeof(uint16_t), .width = sizeof(uint16_t), }, [IEEE80211_RADIOTAP_DBM_TX_POWER] = { .align = sizeof(uint8_t), .width = sizeof(uint8_t), }, [IEEE80211_RADIOTAP_ANTENNA] = { .align = sizeof(uint8_t), .width = sizeof(uint8_t), }, [IEEE80211_RADIOTAP_DB_ANTSIGNAL] = { .align = sizeof(uint8_t), .width = sizeof(uint8_t), }, [IEEE80211_RADIOTAP_DB_ANTNOISE] = { .align = sizeof(uint8_t), .width = sizeof(uint8_t), }, [IEEE80211_RADIOTAP_XCHANNEL] = { .align = sizeof(uint32_t), .width = 2*sizeof(uint32_t), }, [IEEE80211_RADIOTAP_MCS] = { .align = sizeof(uint8_t), .width = 3*sizeof(uint8_t), }, }; uint32_t present = le32toh(rh->it_present); int off, i; off = sizeof(struct ieee80211_radiotap_header); off += n_vendor_attributes * (sizeof(uint32_t)); for (i = 0; i < IEEE80211_RADIOTAP_EXT; i++) { if ((present & (1< le16toh(rh->it_len)) { /* NB: item does not fit in header data */ printf("%s: item %d not in header data, " "off %d width %zu len %d\n", __func__, i, off, items[i].width, le16toh(rh->it_len)); return -1; } return off; } off += items[i].width; } return -1; } Index: head/sys/net80211/ieee80211_regdomain.c =================================================================== --- head/sys/net80211/ieee80211_regdomain.c (revision 283528) +++ head/sys/net80211/ieee80211_regdomain.c (revision 283529) @@ -1,509 +1,509 @@ /*- * Copyright (c) 2005-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 regdomain support. */ #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include static void null_getradiocaps(struct ieee80211com *ic, int maxchan, int *n, struct ieee80211_channel *c) { /* just feed back the current channel list */ if (maxchan > ic->ic_nchans) maxchan = ic->ic_nchans; memcpy(c, ic->ic_channels, maxchan*sizeof(struct ieee80211_channel)); *n = maxchan; } static int null_setregdomain(struct ieee80211com *ic, struct ieee80211_regdomain *rd, int nchans, struct ieee80211_channel chans[]) { return 0; /* accept anything */ } void ieee80211_regdomain_attach(struct ieee80211com *ic) { if (ic->ic_regdomain.regdomain == 0 && ic->ic_regdomain.country == CTRY_DEFAULT) { ic->ic_regdomain.country = CTRY_UNITED_STATES; /* XXX */ ic->ic_regdomain.location = ' '; /* both */ ic->ic_regdomain.isocc[0] = 'U'; /* XXX */ ic->ic_regdomain.isocc[1] = 'S'; /* XXX */ /* NB: driver calls ieee80211_init_channels or similar */ } ic->ic_getradiocaps = null_getradiocaps; ic->ic_setregdomain = null_setregdomain; } void ieee80211_regdomain_detach(struct ieee80211com *ic) { if (ic->ic_countryie != NULL) { free(ic->ic_countryie, M_80211_NODE_IE); ic->ic_countryie = NULL; } } void ieee80211_regdomain_vattach(struct ieee80211vap *vap) { } void ieee80211_regdomain_vdetach(struct ieee80211vap *vap) { } static void addchan(struct ieee80211com *ic, int ieee, int flags) { struct ieee80211_channel *c; c = &ic->ic_channels[ic->ic_nchans++]; c->ic_freq = ieee80211_ieee2mhz(ieee, flags); c->ic_ieee = ieee; c->ic_flags = flags; if (flags & IEEE80211_CHAN_HT40U) c->ic_extieee = ieee + 4; else if (flags & IEEE80211_CHAN_HT40D) c->ic_extieee = ieee - 4; else c->ic_extieee = 0; } /* * Setup the channel list for the specified regulatory domain, * country code, and operating modes. This interface is used * when a driver does not obtain the channel list from another * source (such as firmware). */ int ieee80211_init_channels(struct ieee80211com *ic, const struct ieee80211_regdomain *rd, const uint8_t bands[]) { int i; /* XXX just do something for now */ ic->ic_nchans = 0; if (isset(bands, IEEE80211_MODE_11B) || isset(bands, IEEE80211_MODE_11G) || isset(bands, IEEE80211_MODE_11NG)) { int maxchan = 11; if (rd != NULL && rd->ecm) maxchan = 14; for (i = 1; i <= maxchan; i++) { if (isset(bands, IEEE80211_MODE_11B)) addchan(ic, i, IEEE80211_CHAN_B); if (isset(bands, IEEE80211_MODE_11G)) addchan(ic, i, IEEE80211_CHAN_G); if (isset(bands, IEEE80211_MODE_11NG)) { addchan(ic, i, IEEE80211_CHAN_G | IEEE80211_CHAN_HT20); } if ((ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) == 0) continue; if (i <= 7) { addchan(ic, i, IEEE80211_CHAN_G | IEEE80211_CHAN_HT40U); addchan(ic, i + 4, IEEE80211_CHAN_G | IEEE80211_CHAN_HT40D); } } } if (isset(bands, IEEE80211_MODE_11A) || isset(bands, IEEE80211_MODE_11NA)) { for (i = 36; i <= 64; i += 4) { addchan(ic, i, IEEE80211_CHAN_A); if (isset(bands, IEEE80211_MODE_11NA)) { addchan(ic, i, IEEE80211_CHAN_A | IEEE80211_CHAN_HT20); } if ((ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) == 0) continue; if ((i % 8) == 4) { addchan(ic, i, IEEE80211_CHAN_A | IEEE80211_CHAN_HT40U); addchan(ic, i + 4, IEEE80211_CHAN_A | IEEE80211_CHAN_HT40D); } } for (i = 100; i <= 140; i += 4) { addchan(ic, i, IEEE80211_CHAN_A); if (isset(bands, IEEE80211_MODE_11NA)) { addchan(ic, i, IEEE80211_CHAN_A | IEEE80211_CHAN_HT20); } if ((ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) == 0) continue; if ((i % 8) == 4 && i != 140) { addchan(ic, i, IEEE80211_CHAN_A | IEEE80211_CHAN_HT40U); addchan(ic, i + 4, IEEE80211_CHAN_A | IEEE80211_CHAN_HT40D); } } for (i = 149; i <= 161; i += 4) { addchan(ic, i, IEEE80211_CHAN_A); if (isset(bands, IEEE80211_MODE_11NA)) { addchan(ic, i, IEEE80211_CHAN_A | IEEE80211_CHAN_HT20); } if ((ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) == 0) continue; if ((i % 8) == 5) { addchan(ic, i, IEEE80211_CHAN_A | IEEE80211_CHAN_HT40U); addchan(ic, i + 4, IEEE80211_CHAN_A | IEEE80211_CHAN_HT40D); } } } if (rd != NULL) ic->ic_regdomain = *rd; return 0; } static __inline int chancompar(const void *a, const void *b) { const struct ieee80211_channel *ca = a; const struct ieee80211_channel *cb = b; return (ca->ic_freq == cb->ic_freq) ? (ca->ic_flags & IEEE80211_CHAN_ALL) - (cb->ic_flags & IEEE80211_CHAN_ALL) : ca->ic_freq - cb->ic_freq; } /* * Insertion sort. */ #define swap(_a, _b, _size) { \ uint8_t *s = _b; \ int i = _size; \ do { \ uint8_t tmp = *_a; \ *_a++ = *s; \ *s++ = tmp; \ } while (--i); \ _a -= _size; \ } static void sort_channels(void *a, size_t n, size_t size) { uint8_t *aa = a; uint8_t *ai, *t; KASSERT(n > 0, ("no channels")); for (ai = aa+size; --n >= 1; ai += size) for (t = ai; t > aa; t -= size) { uint8_t *u = t - size; if (chancompar(u, t) <= 0) break; swap(u, t, size); } } #undef swap /* * Order channels w/ the same frequency so that * b < g < htg and a < hta. This is used to optimize * channel table lookups and some user applications * may also depend on it (though they should not). */ void ieee80211_sort_channels(struct ieee80211_channel chans[], int nchans) { if (nchans > 0) sort_channels(chans, nchans, sizeof(struct ieee80211_channel)); } /* * Allocate and construct a Country Information IE. */ struct ieee80211_appie * ieee80211_alloc_countryie(struct ieee80211com *ic) { #define CHAN_UNINTERESTING \ (IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO | \ IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER) /* XXX what about auto? */ /* flag set of channels to be excluded (band added below) */ static const int skipflags[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_AUTO] = CHAN_UNINTERESTING, [IEEE80211_MODE_11A] = CHAN_UNINTERESTING, [IEEE80211_MODE_11B] = CHAN_UNINTERESTING, [IEEE80211_MODE_11G] = CHAN_UNINTERESTING, [IEEE80211_MODE_FH] = CHAN_UNINTERESTING | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_CCK | IEEE80211_CHAN_DYN, [IEEE80211_MODE_TURBO_A] = CHAN_UNINTERESTING, [IEEE80211_MODE_TURBO_G] = CHAN_UNINTERESTING, [IEEE80211_MODE_STURBO_A] = CHAN_UNINTERESTING, [IEEE80211_MODE_HALF] = IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO, [IEEE80211_MODE_QUARTER] = IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO, [IEEE80211_MODE_11NA] = CHAN_UNINTERESTING, [IEEE80211_MODE_11NG] = CHAN_UNINTERESTING, }; const struct ieee80211_regdomain *rd = &ic->ic_regdomain; uint8_t nextchan, chans[IEEE80211_CHAN_BYTES], *frm; struct ieee80211_appie *aie; struct ieee80211_country_ie *ie; int i, skip, nruns; aie = malloc(IEEE80211_COUNTRY_MAX_SIZE, M_80211_NODE_IE, M_NOWAIT | M_ZERO); if (aie == NULL) { - if_printf(ic->ic_ifp, - "%s: unable to allocate memory for country ie\n", __func__); + ic_printf(ic, "%s: unable to allocate memory for country ie\n", + __func__); /* XXX stat */ return NULL; } ie = (struct ieee80211_country_ie *) aie->ie_data; ie->ie = IEEE80211_ELEMID_COUNTRY; if (rd->isocc[0] == '\0') { - if_printf(ic->ic_ifp, "no ISO country string for cc %d; " - "using blanks\n", rd->country); + ic_printf(ic, "no ISO country string for cc %d; using blanks\n", + rd->country); ie->cc[0] = ie->cc[1] = ' '; } else { ie->cc[0] = rd->isocc[0]; ie->cc[1] = rd->isocc[1]; } /* * Indoor/Outdoor portion of country string: * 'I' indoor only * 'O' outdoor only * ' ' all enviroments */ ie->cc[2] = (rd->location == 'I' ? 'I' : rd->location == 'O' ? 'O' : ' '); /* * Run-length encoded channel+max tx power info. */ frm = (uint8_t *)&ie->band[0]; nextchan = 0; /* NB: impossible channel # */ nruns = 0; memset(chans, 0, sizeof(chans)); skip = skipflags[ieee80211_chan2mode(ic->ic_bsschan)]; if (IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan)) skip |= IEEE80211_CHAN_2GHZ; else if (IEEE80211_IS_CHAN_2GHZ(ic->ic_bsschan)) skip |= IEEE80211_CHAN_5GHZ; for (i = 0; i < ic->ic_nchans; i++) { const struct ieee80211_channel *c = &ic->ic_channels[i]; if (isset(chans, c->ic_ieee)) /* suppress dup's */ continue; if (c->ic_flags & skip) /* skip band, etc. */ continue; setbit(chans, c->ic_ieee); if (c->ic_ieee != nextchan || c->ic_maxregpower != frm[-1]) { /* new run */ if (nruns == IEEE80211_COUNTRY_MAX_BANDS) { - if_printf(ic->ic_ifp, "%s: country ie too big, " + ic_printf(ic, "%s: country ie too big, " "runs > max %d, truncating\n", __func__, IEEE80211_COUNTRY_MAX_BANDS); /* XXX stat? fail? */ break; } frm[0] = c->ic_ieee; /* starting channel # */ frm[1] = 1; /* # channels in run */ frm[2] = c->ic_maxregpower; /* tx power cap */ frm += 3; nextchan = c->ic_ieee + 1; /* overflow? */ nruns++; } else { /* extend run */ frm[-2]++; nextchan++; } } ie->len = frm - ie->cc; if (ie->len & 1) { /* Zero pad to multiple of 2 */ ie->len++; *frm++ = 0; } aie->ie_len = frm - aie->ie_data; return aie; #undef CHAN_UNINTERESTING } static int allvapsdown(struct ieee80211com *ic) { struct ieee80211vap *vap; IEEE80211_LOCK_ASSERT(ic); TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) if (vap->iv_state != IEEE80211_S_INIT) return 0; return 1; } int ieee80211_setregdomain(struct ieee80211vap *vap, struct ieee80211_regdomain_req *reg) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_channel *c; int desfreq = 0, desflags = 0; /* XXX silence gcc complaint */ int error, i; if (reg->rd.location != 'I' && reg->rd.location != 'O' && reg->rd.location != ' ') { IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL, "%s: invalid location 0x%x\n", __func__, reg->rd.location); return EINVAL; } if (reg->rd.isocc[0] == '\0' || reg->rd.isocc[1] == '\0') { IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL, "%s: invalid iso cc 0x%x:0x%x\n", __func__, reg->rd.isocc[0], reg->rd.isocc[1]); return EINVAL; } if (reg->chaninfo.ic_nchans > IEEE80211_CHAN_MAX) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL, "%s: too many channels %u, max %u\n", __func__, reg->chaninfo.ic_nchans, IEEE80211_CHAN_MAX); return EINVAL; } /* * Calculate freq<->IEEE mapping and default max tx power * for channels not setup. The driver can override these * setting to reflect device properties/requirements. */ for (i = 0; i < reg->chaninfo.ic_nchans; i++) { c = ®->chaninfo.ic_chans[i]; if (c->ic_freq == 0 || c->ic_flags == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL, "%s: invalid channel spec at [%u]\n", __func__, i); return EINVAL; } if (c->ic_maxregpower == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL, "%s: invalid channel spec, zero maxregpower, " "freq %u flags 0x%x\n", __func__, c->ic_freq, c->ic_flags); return EINVAL; } if (c->ic_ieee == 0) c->ic_ieee = ieee80211_mhz2ieee(c->ic_freq,c->ic_flags); if (IEEE80211_IS_CHAN_HT40(c) && c->ic_extieee == 0) c->ic_extieee = ieee80211_mhz2ieee(c->ic_freq + (IEEE80211_IS_CHAN_HT40U(c) ? 20 : -20), c->ic_flags); if (c->ic_maxpower == 0) c->ic_maxpower = 2*c->ic_maxregpower; } IEEE80211_LOCK(ic); /* XXX bandaid; a running vap will likely crash */ if (!allvapsdown(ic)) { IEEE80211_UNLOCK(ic); IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL, "%s: reject: vaps are running\n", __func__); return EBUSY; } error = ic->ic_setregdomain(ic, ®->rd, reg->chaninfo.ic_nchans, reg->chaninfo.ic_chans); if (error != 0) { IEEE80211_UNLOCK(ic); IEEE80211_DPRINTF(vap, IEEE80211_MSG_IOCTL, "%s: driver rejected request, error %u\n", __func__, error); return error; } /* * Commit: copy in new channel table and reset media state. * On return the state machines will be clocked so all vaps * will reset their state. * * XXX ic_bsschan is marked undefined, must have vap's in * INIT state or we blow up forcing stations off */ /* * Save any desired channel for restore below. Note this * needs to be done for all vaps but for now we only do * the one where the ioctl is issued. */ if (vap->iv_des_chan != IEEE80211_CHAN_ANYC) { desfreq = vap->iv_des_chan->ic_freq; desflags = vap->iv_des_chan->ic_flags; } /* regdomain parameters */ memcpy(&ic->ic_regdomain, ®->rd, sizeof(reg->rd)); /* channel table */ memcpy(ic->ic_channels, reg->chaninfo.ic_chans, reg->chaninfo.ic_nchans * sizeof(struct ieee80211_channel)); ic->ic_nchans = reg->chaninfo.ic_nchans; memset(&ic->ic_channels[ic->ic_nchans], 0, (IEEE80211_CHAN_MAX - ic->ic_nchans) * sizeof(struct ieee80211_channel)); ieee80211_media_init(ic); /* * Invalidate channel-related state. */ if (ic->ic_countryie != NULL) { free(ic->ic_countryie, M_80211_NODE_IE); ic->ic_countryie = NULL; } ieee80211_scan_flush(vap); ieee80211_dfs_reset(ic); if (vap->iv_des_chan != IEEE80211_CHAN_ANYC) { c = ieee80211_find_channel(ic, desfreq, desflags); /* NB: may be NULL if not present in new channel list */ vap->iv_des_chan = (c != NULL) ? c : IEEE80211_CHAN_ANYC; } IEEE80211_UNLOCK(ic); return 0; } Index: head/sys/net80211/ieee80211_var.h =================================================================== --- head/sys/net80211/ieee80211_var.h (revision 283528) +++ head/sys/net80211/ieee80211_var.h (revision 283529) @@ -1,983 +1,984 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_VAR_H_ #define _NET80211_IEEE80211_VAR_H_ /* * Definitions for IEEE 802.11 drivers. */ /* NB: portability glue must go first */ #if defined(__NetBSD__) #include #elif defined(__FreeBSD__) #include #elif defined(__linux__) #include #else #error "No support for your operating system!" #endif #include #include #include #include #include #include /* for ieee80211_stats */ #include #include #include #include #include #include #define IEEE80211_TXPOWER_MAX 100 /* .5 dBm (XXX units?) */ #define IEEE80211_TXPOWER_MIN 0 /* kill radio */ #define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */ #define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */ #define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */ #define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */ #define IEEE80211_BGSCAN_INTVAL_MIN 15 /* min bg scan intvl (secs) */ #define IEEE80211_BGSCAN_INTVAL_DEFAULT (5*60) /* default bg scan intvl */ #define IEEE80211_BGSCAN_IDLE_MIN 100 /* min idle time (ms) */ #define IEEE80211_BGSCAN_IDLE_DEFAULT 250 /* default idle time (ms) */ #define IEEE80211_SCAN_VALID_MIN 10 /* min scan valid time (secs) */ #define IEEE80211_SCAN_VALID_DEFAULT 60 /* default scan valid time */ #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ #define IEEE80211_FIXED_RATE_NONE 0xff #define IEEE80211_TXMAX_DEFAULT 6 /* default ucast max retries */ #define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX #define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024) #define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000) #define IEEE80211_TU_TO_TICKS(x)(((x) * 1024 * hz) / (1000 * 1000)) /* * 802.11 control state is split into a common portion that maps * 1-1 to a physical device and one or more "Virtual AP's" (VAP) * that are bound to an ieee80211com instance and share a single * underlying device. Each VAP has a corresponding OS device * entity through which traffic flows and that applications use * for issuing ioctls, etc. */ /* * Data common to one or more virtual AP's. State shared by * the underlying device and the net80211 layer is exposed here; * e.g. device-specific callbacks. */ struct ieee80211vap; typedef void (*ieee80211vap_attach)(struct ieee80211vap *); struct ieee80211_appie { uint16_t ie_len; /* size of ie_data */ uint8_t ie_data[]; /* user-specified IE's */ }; struct ieee80211_tdma_param; struct ieee80211_rate_table; struct ieee80211_tx_ampdu; struct ieee80211_rx_ampdu; struct ieee80211_superg; struct ieee80211_frame; struct ieee80211com { struct ifnet *ic_ifp; /* associated device */ const char *ic_name; /* usually device name */ ieee80211_com_lock_t ic_comlock; /* state update lock */ ieee80211_tx_lock_t ic_txlock; /* ic/vap TX lock */ TAILQ_HEAD(, ieee80211vap) ic_vaps; /* list of vap instances */ int ic_headroom; /* driver tx headroom needs */ enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */ enum ieee80211_opmode ic_opmode; /* operation mode */ struct ifmedia ic_media; /* interface media config */ struct callout ic_inact; /* inactivity processing */ struct taskqueue *ic_tq; /* deferred state thread */ struct task ic_parent_task; /* deferred parent processing */ struct task ic_promisc_task;/* deferred promisc update */ struct task ic_mcast_task; /* deferred mcast update */ struct task ic_chan_task; /* deferred channel change */ struct task ic_bmiss_task; /* deferred beacon miss hndlr */ struct task ic_chw_task; /* deferred HT CHW update */ uint32_t ic_flags; /* state flags */ uint32_t ic_flags_ext; /* extended state flags */ uint32_t ic_flags_ht; /* HT state flags */ uint32_t ic_flags_ven; /* vendor state flags */ uint32_t ic_caps; /* capabilities */ uint32_t ic_htcaps; /* HT capabilities */ uint32_t ic_htextcaps; /* HT extended capabilities */ uint32_t ic_cryptocaps; /* crypto capabilities */ uint8_t ic_modecaps[2]; /* set of mode capabilities */ uint8_t ic_promisc; /* vap's needing promisc mode */ uint8_t ic_allmulti; /* vap's needing all multicast*/ uint8_t ic_nrunning; /* vap's marked running */ uint8_t ic_curmode; /* current mode */ uint16_t ic_bintval; /* beacon interval */ uint16_t ic_lintval; /* listen interval */ uint16_t ic_holdover; /* PM hold over duration */ uint16_t ic_txpowlimit; /* global tx power limit */ struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX]; /* * Channel state: * * ic_channels is the set of available channels for the device; * it is setup by the driver * ic_nchans is the number of valid entries in ic_channels * ic_chan_avail is a bit vector of these channels used to check * whether a channel is available w/o searching the channel table. * ic_chan_active is a (potentially) constrained subset of * ic_chan_avail that reflects any mode setting or user-specified * limit on the set of channels to use/scan * ic_curchan is the current channel the device is set to; it may * be different from ic_bsschan when we are off-channel scanning * or otherwise doing background work * ic_bsschan is the channel selected for operation; it may * be undefined (IEEE80211_CHAN_ANYC) * ic_prevchan is a cached ``previous channel'' used to optimize * lookups when switching back+forth between two channels * (e.g. for dynamic turbo) */ int ic_nchans; /* # entries in ic_channels */ struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX]; uint8_t ic_chan_avail[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_active[IEEE80211_CHAN_BYTES]; uint8_t ic_chan_scan[IEEE80211_CHAN_BYTES]; struct ieee80211_channel *ic_curchan; /* current channel */ const struct ieee80211_rate_table *ic_rt; /* table for ic_curchan */ struct ieee80211_channel *ic_bsschan; /* bss channel */ struct ieee80211_channel *ic_prevchan; /* previous channel */ struct ieee80211_regdomain ic_regdomain;/* regulatory data */ struct ieee80211_appie *ic_countryie; /* calculated country ie */ struct ieee80211_channel *ic_countryie_chan; /* 802.11h/DFS state */ struct ieee80211_channel *ic_csa_newchan;/* channel for doing CSA */ short ic_csa_mode; /* mode for doing CSA */ short ic_csa_count; /* count for doing CSA */ struct ieee80211_dfs_state ic_dfs; /* DFS state */ struct ieee80211_scan_state *ic_scan; /* scan state */ int ic_lastdata; /* time of last data frame */ int ic_lastscan; /* time last scan completed */ /* NB: this is the union of all vap stations/neighbors */ int ic_max_keyix; /* max h/w key index */ struct ieee80211_node_table ic_sta; /* stations/neighbors */ struct ieee80211_ageq ic_stageq; /* frame staging queue */ uint32_t ic_hash_key; /* random key for mac hash */ /* XXX multi-bss: split out common/vap parts */ struct ieee80211_wme_state ic_wme; /* WME/WMM state */ /* XXX multi-bss: can per-vap be done/make sense? */ enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */ uint16_t ic_nonerpsta; /* # non-ERP stations */ uint16_t ic_longslotsta; /* # long slot time stations */ uint16_t ic_sta_assoc; /* stations associated */ uint16_t ic_ht_sta_assoc;/* HT stations associated */ uint16_t ic_ht40_sta_assoc;/* HT40 stations associated */ uint8_t ic_curhtprotmode;/* HTINFO bss state */ enum ieee80211_protmode ic_htprotmode; /* HT protection mode */ int ic_lastnonerp; /* last time non-ERP sta noted*/ int ic_lastnonht; /* last time non-HT sta noted */ uint8_t ic_rxstream; /* # RX streams */ uint8_t ic_txstream; /* # TX streams */ /* optional state for Atheros SuperG protocol extensions */ struct ieee80211_superg *ic_superg; /* radiotap handling */ struct ieee80211_radiotap_header *ic_th;/* tx radiotap headers */ void *ic_txchan; /* channel state in ic_th */ struct ieee80211_radiotap_header *ic_rh;/* rx radiotap headers */ void *ic_rxchan; /* channel state in ic_rh */ int ic_montaps; /* active monitor mode taps */ /* virtual ap create/delete */ struct ieee80211vap* (*ic_vap_create)(struct ieee80211com *, const char [IFNAMSIZ], int, enum ieee80211_opmode, int, const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN]); void (*ic_vap_delete)(struct ieee80211vap *); /* operating mode attachment */ ieee80211vap_attach ic_vattach[IEEE80211_OPMODE_MAX]; /* return hardware/radio capabilities */ void (*ic_getradiocaps)(struct ieee80211com *, int, int *, struct ieee80211_channel []); /* check and/or prepare regdomain state change */ int (*ic_setregdomain)(struct ieee80211com *, struct ieee80211_regdomain *, int, struct ieee80211_channel []); int (*ic_set_quiet)(struct ieee80211_node *, u_int8_t *quiet_elm); /* send/recv 802.11 management frame */ int (*ic_send_mgmt)(struct ieee80211_node *, int, int); /* send raw 802.11 frame */ int (*ic_raw_xmit)(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); /* update device state for 802.11 slot time change */ void (*ic_updateslot)(struct ifnet *); /* handle multicast state changes */ void (*ic_update_mcast)(struct ifnet *); /* handle promiscuous mode changes */ void (*ic_update_promisc)(struct ifnet *); /* new station association callback/notification */ void (*ic_newassoc)(struct ieee80211_node *, int); /* TDMA update notification */ void (*ic_tdma_update)(struct ieee80211_node *, const struct ieee80211_tdma_param *, int); /* node state management */ struct ieee80211_node* (*ic_node_alloc)(struct ieee80211vap *, const uint8_t [IEEE80211_ADDR_LEN]); void (*ic_node_free)(struct ieee80211_node *); void (*ic_node_cleanup)(struct ieee80211_node *); void (*ic_node_age)(struct ieee80211_node *); void (*ic_node_drain)(struct ieee80211_node *); int8_t (*ic_node_getrssi)(const struct ieee80211_node*); void (*ic_node_getsignal)(const struct ieee80211_node*, int8_t *, int8_t *); void (*ic_node_getmimoinfo)( const struct ieee80211_node*, struct ieee80211_mimo_info *); /* scanning support */ void (*ic_scan_start)(struct ieee80211com *); void (*ic_scan_end)(struct ieee80211com *); void (*ic_set_channel)(struct ieee80211com *); void (*ic_scan_curchan)(struct ieee80211_scan_state *, unsigned long); void (*ic_scan_mindwell)(struct ieee80211_scan_state *); /* * 802.11n ADDBA support. A simple/generic implementation * of A-MPDU tx aggregation is provided; the driver may * override these methods to provide their own support. * A-MPDU rx re-ordering happens automatically if the * driver passes out-of-order frames to ieee80211_input * from an assocated HT station. */ int (*ic_recv_action)(struct ieee80211_node *, const struct ieee80211_frame *, const uint8_t *frm, const uint8_t *efrm); int (*ic_send_action)(struct ieee80211_node *, int category, int action, void *); /* check if A-MPDU should be enabled this station+ac */ int (*ic_ampdu_enable)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); /* start/stop doing A-MPDU tx aggregation for a station */ int (*ic_addba_request)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int dialogtoken, int baparamset, int batimeout); int (*ic_addba_response)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int status, int baparamset, int batimeout); void (*ic_addba_stop)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); void (*ic_addba_response_timeout)(struct ieee80211_node *, struct ieee80211_tx_ampdu *); /* BAR response received */ void (*ic_bar_response)(struct ieee80211_node *, struct ieee80211_tx_ampdu *, int status); /* start/stop doing A-MPDU rx processing for a station */ int (*ic_ampdu_rx_start)(struct ieee80211_node *, struct ieee80211_rx_ampdu *, int baparamset, int batimeout, int baseqctl); void (*ic_ampdu_rx_stop)(struct ieee80211_node *, struct ieee80211_rx_ampdu *); /* The channel width has changed (20<->2040) */ void (*ic_update_chw)(struct ieee80211com *); uint64_t ic_spare[7]; }; struct ieee80211_aclator; struct ieee80211_tdma_state; struct ieee80211_mesh_state; struct ieee80211_hwmp_state; struct ieee80211vap { struct ifmedia iv_media; /* interface media config */ struct ifnet *iv_ifp; /* associated device */ struct bpf_if *iv_rawbpf; /* packet filter structure */ struct sysctl_ctx_list *iv_sysctl; /* dynamic sysctl context */ struct sysctl_oid *iv_oid; /* net.wlan.X sysctl oid */ TAILQ_ENTRY(ieee80211vap) iv_next; /* list of vap instances */ struct ieee80211com *iv_ic; /* back ptr to common state */ uint32_t iv_debug; /* debug msg flags */ struct ieee80211_stats iv_stats; /* statistics */ uint8_t iv_myaddr[IEEE80211_ADDR_LEN]; uint32_t iv_flags; /* state flags */ uint32_t iv_flags_ext; /* extended state flags */ uint32_t iv_flags_ht; /* HT state flags */ uint32_t iv_flags_ven; /* vendor state flags */ uint32_t iv_caps; /* capabilities */ uint32_t iv_htcaps; /* HT capabilities */ uint32_t iv_htextcaps; /* HT extended capabilities */ enum ieee80211_opmode iv_opmode; /* operation mode */ enum ieee80211_state iv_state; /* state machine state */ enum ieee80211_state iv_nstate; /* pending state */ int iv_nstate_arg; /* pending state arg */ struct task iv_nstate_task; /* deferred state processing */ struct task iv_swbmiss_task;/* deferred iv_bmiss call */ struct callout iv_mgtsend; /* mgmt frame response timer */ /* inactivity timer settings */ int iv_inact_init; /* setting for new station */ int iv_inact_auth; /* auth but not assoc setting */ int iv_inact_run; /* authorized setting */ int iv_inact_probe; /* inactive probe time */ int iv_des_nssid; /* # desired ssids */ struct ieee80211_scan_ssid iv_des_ssid[1];/* desired ssid table */ uint8_t iv_des_bssid[IEEE80211_ADDR_LEN]; struct ieee80211_channel *iv_des_chan; /* desired channel */ uint16_t iv_des_mode; /* desired mode */ int iv_nicknamelen; /* XXX junk */ uint8_t iv_nickname[IEEE80211_NWID_LEN]; u_int iv_bgscanidle; /* bg scan idle threshold */ u_int iv_bgscanintvl; /* bg scan min interval */ u_int iv_scanvalid; /* scan cache valid threshold */ u_int iv_scanreq_duration; u_int iv_scanreq_mindwell; u_int iv_scanreq_maxdwell; uint16_t iv_scanreq_flags;/* held scan request params */ uint8_t iv_scanreq_nssid; struct ieee80211_scan_ssid iv_scanreq_ssid[IEEE80211_SCAN_MAX_SSID]; /* sta-mode roaming state */ enum ieee80211_roamingmode iv_roaming; /* roaming mode */ struct ieee80211_roamparam iv_roamparms[IEEE80211_MODE_MAX]; uint8_t iv_bmissthreshold; uint8_t iv_bmiss_count; /* current beacon miss count */ int iv_bmiss_max; /* max bmiss before scan */ uint16_t iv_swbmiss_count;/* beacons in last period */ uint16_t iv_swbmiss_period;/* s/w bmiss period */ struct callout iv_swbmiss; /* s/w beacon miss timer */ int iv_ampdu_rxmax; /* A-MPDU rx limit (bytes) */ int iv_ampdu_density;/* A-MPDU density */ int iv_ampdu_limit; /* A-MPDU tx limit (bytes) */ int iv_amsdu_limit; /* A-MSDU tx limit (bytes) */ u_int iv_ampdu_mintraffic[WME_NUM_AC]; uint32_t *iv_aid_bitmap; /* association id map */ uint16_t iv_max_aid; uint16_t iv_sta_assoc; /* stations associated */ uint16_t iv_ps_sta; /* stations in power save */ uint16_t iv_ps_pending; /* ps sta's w/ pending frames */ uint16_t iv_txseq; /* mcast xmit seq# space */ uint16_t iv_tim_len; /* ic_tim_bitmap size (bytes) */ uint8_t *iv_tim_bitmap; /* power-save stations w/ data*/ uint8_t iv_dtim_period; /* DTIM period */ uint8_t iv_dtim_count; /* DTIM count from last bcn */ /* set/unset aid pwrsav state */ uint8_t iv_quiet; /* Quiet Element */ uint8_t iv_quiet_count; /* constant count for Quiet Element */ uint8_t iv_quiet_count_value; /* variable count for Quiet Element */ uint8_t iv_quiet_period; /* period for Quiet Element */ uint16_t iv_quiet_duration; /* duration for Quiet Element */ uint16_t iv_quiet_offset; /* offset for Quiet Element */ int iv_csa_count; /* count for doing CSA */ struct ieee80211_node *iv_bss; /* information for this node */ struct ieee80211_txparam iv_txparms[IEEE80211_MODE_MAX]; uint16_t iv_rtsthreshold; uint16_t iv_fragthreshold; int iv_inact_timer; /* inactivity timer wait */ /* application-specified IE's to attach to mgt frames */ struct ieee80211_appie *iv_appie_beacon; struct ieee80211_appie *iv_appie_probereq; struct ieee80211_appie *iv_appie_proberesp; struct ieee80211_appie *iv_appie_assocreq; struct ieee80211_appie *iv_appie_assocresp; struct ieee80211_appie *iv_appie_wpa; uint8_t *iv_wpa_ie; uint8_t *iv_rsn_ie; uint16_t iv_max_keyix; /* max h/w key index */ ieee80211_keyix iv_def_txkey; /* default/group tx key index */ struct ieee80211_key iv_nw_keys[IEEE80211_WEP_NKID]; int (*iv_key_alloc)(struct ieee80211vap *, struct ieee80211_key *, ieee80211_keyix *, ieee80211_keyix *); int (*iv_key_delete)(struct ieee80211vap *, const struct ieee80211_key *); int (*iv_key_set)(struct ieee80211vap *, const struct ieee80211_key *, const uint8_t mac[IEEE80211_ADDR_LEN]); void (*iv_key_update_begin)(struct ieee80211vap *); void (*iv_key_update_end)(struct ieee80211vap *); const struct ieee80211_authenticator *iv_auth; /* authenticator glue */ void *iv_ec; /* private auth state */ const struct ieee80211_aclator *iv_acl; /* acl glue */ void *iv_as; /* private aclator state */ const struct ieee80211_ratectl *iv_rate; void *iv_rs; /* private ratectl state */ struct ieee80211_tdma_state *iv_tdma; /* tdma state */ struct ieee80211_mesh_state *iv_mesh; /* MBSS state */ struct ieee80211_hwmp_state *iv_hwmp; /* HWMP state */ /* operate-mode detach hook */ void (*iv_opdetach)(struct ieee80211vap *); /* receive processing */ int (*iv_input)(struct ieee80211_node *, struct mbuf *, int, int); void (*iv_recv_mgmt)(struct ieee80211_node *, struct mbuf *, int, int, int); void (*iv_recv_ctl)(struct ieee80211_node *, struct mbuf *, int); void (*iv_deliver_data)(struct ieee80211vap *, struct ieee80211_node *, struct mbuf *); #if 0 /* send processing */ int (*iv_send_mgmt)(struct ieee80211_node *, int, int); #endif /* beacon miss processing */ void (*iv_bmiss)(struct ieee80211vap *); /* reset device state after 802.11 parameter/state change */ int (*iv_reset)(struct ieee80211vap *, u_long); /* [schedule] beacon frame update */ void (*iv_update_beacon)(struct ieee80211vap *, int); /* power save handling */ void (*iv_update_ps)(struct ieee80211vap *, int); int (*iv_set_tim)(struct ieee80211_node *, int); void (*iv_node_ps)(struct ieee80211_node *, int); void (*iv_sta_ps)(struct ieee80211vap *, int); void (*iv_recv_pspoll)(struct ieee80211_node *, struct mbuf *); /* state machine processing */ int (*iv_newstate)(struct ieee80211vap *, enum ieee80211_state, int); /* 802.3 output method for raw frame xmit */ #if __FreeBSD_version >= 1000031 int (*iv_output)(struct ifnet *, struct mbuf *, const struct sockaddr *, struct route *); #else int (*iv_output)(struct ifnet *, struct mbuf *, struct sockaddr *, struct route *); #endif uint64_t iv_spare[6]; }; MALLOC_DECLARE(M_80211_VAP); #define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0) #define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN) /* ic_flags/iv_flags */ #define IEEE80211_F_TURBOP 0x00000001 /* CONF: ATH Turbo enabled*/ #define IEEE80211_F_COMP 0x00000002 /* CONF: ATH comp enabled */ #define IEEE80211_F_FF 0x00000004 /* CONF: ATH FF enabled */ #define IEEE80211_F_BURST 0x00000008 /* CONF: bursting enabled */ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */ #define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */ #define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */ #define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */ #define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */ #define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */ /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */ #define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/ #define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */ #define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */ #define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */ #define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/ #define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */ #define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */ #define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */ #define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */ #define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */ #define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */ #define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/ #define IEEE80211_F_CSAPENDING 0x00400000 /* STATUS: chan switch pending*/ #define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */ #define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */ #define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */ #define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */ #define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */ #define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */ #define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */ #define IEEE80211_F_PCF 0x20000000 /* CONF: PCF enabled */ #define IEEE80211_F_DOTH 0x40000000 /* CONF: 11h enabled */ #define IEEE80211_F_DWDS 0x80000000 /* CONF: Dynamic WDS enabled */ #define IEEE80211_F_BITS \ "\20\1TURBOP\2COMP\3FF\4BURST\5PRIVACY\6PUREG\10SCAN\11ASCAN\12SIBSS" \ "\13SHSLOT\14PMGTON\15DESBSSID\16WME\17BGSCAN\20SWRETRY\21TXPOW_FIXED" \ "\22IBSSON\23SHPREAMBLE\24DATAPAD\25USEPROT\26USERBARKER\27CSAPENDING" \ "\30WPA1\31WPA2\32DROPUNENC\33COUNTERM\34HIDESSID\35NOBRIDG\36PCF" \ "\37DOTH\40DWDS" /* Atheros protocol-specific flags */ #define IEEE80211_F_ATHEROS \ (IEEE80211_F_FF | IEEE80211_F_COMP | IEEE80211_F_TURBOP) /* Check if an Atheros capability was negotiated for use */ #define IEEE80211_ATH_CAP(vap, ni, bit) \ ((vap)->iv_flags & (ni)->ni_ath_flags & (bit)) /* ic_flags_ext/iv_flags_ext */ #define IEEE80211_FEXT_INACT 0x00000002 /* CONF: sta inact handling */ #define IEEE80211_FEXT_SCANWAIT 0x00000004 /* STATUS: awaiting scan */ /* 0x00000006 reserved */ #define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: complete bgscan */ #define IEEE80211_FEXT_WPS 0x00000010 /* CONF: WPS enabled */ #define IEEE80211_FEXT_TSN 0x00000020 /* CONF: TSN enabled */ #define IEEE80211_FEXT_SCANREQ 0x00000040 /* STATUS: scan req params */ #define IEEE80211_FEXT_RESUME 0x00000080 /* STATUS: start on resume */ #define IEEE80211_FEXT_4ADDR 0x00000100 /* CONF: apply 4-addr encap */ #define IEEE80211_FEXT_NONERP_PR 0x00000200 /* STATUS: non-ERP sta present*/ #define IEEE80211_FEXT_SWBMISS 0x00000400 /* CONF: do bmiss in s/w */ #define IEEE80211_FEXT_DFS 0x00000800 /* CONF: DFS enabled */ #define IEEE80211_FEXT_DOTD 0x00001000 /* CONF: 11d enabled */ #define IEEE80211_FEXT_STATEWAIT 0x00002000 /* STATUS: awaiting state chg */ #define IEEE80211_FEXT_REINIT 0x00004000 /* STATUS: INIT state first */ #define IEEE80211_FEXT_BPF 0x00008000 /* STATUS: BPF tap present */ /* NB: immutable: should be set only when creating a vap */ #define IEEE80211_FEXT_WDSLEGACY 0x00010000 /* CONF: legacy WDS operation */ #define IEEE80211_FEXT_PROBECHAN 0x00020000 /* CONF: probe passive channel*/ #define IEEE80211_FEXT_UNIQMAC 0x00040000 /* CONF: user or computed mac */ #define IEEE80211_FEXT_BITS \ "\20\2INACT\3SCANWAIT\4BGSCAN\5WPS\6TSN\7SCANREQ\10RESUME" \ "\0114ADDR\12NONEPR_PR\13SWBMISS\14DFS\15DOTD\16STATEWAIT\17REINIT" \ "\20BPF\21WDSLEGACY\22PROBECHAN\23UNIQMAC" /* ic_flags_ht/iv_flags_ht */ #define IEEE80211_FHT_NONHT_PR 0x00000001 /* STATUS: non-HT sta present */ #define IEEE80211_FHT_GF 0x00040000 /* CONF: Greenfield enabled */ #define IEEE80211_FHT_HT 0x00080000 /* CONF: HT supported */ #define IEEE80211_FHT_AMPDU_TX 0x00100000 /* CONF: A-MPDU tx supported */ #define IEEE80211_FHT_AMPDU_RX 0x00200000 /* CONF: A-MPDU rx supported */ #define IEEE80211_FHT_AMSDU_TX 0x00400000 /* CONF: A-MSDU tx supported */ #define IEEE80211_FHT_AMSDU_RX 0x00800000 /* CONF: A-MSDU rx supported */ #define IEEE80211_FHT_USEHT40 0x01000000 /* CONF: 20/40 use enabled */ #define IEEE80211_FHT_PUREN 0x02000000 /* CONF: 11n w/o legacy sta's */ #define IEEE80211_FHT_SHORTGI20 0x04000000 /* CONF: short GI in HT20 */ #define IEEE80211_FHT_SHORTGI40 0x08000000 /* CONF: short GI in HT40 */ #define IEEE80211_FHT_HTCOMPAT 0x10000000 /* CONF: HT vendor OUI's */ #define IEEE80211_FHT_RIFS 0x20000000 /* CONF: RIFS enabled */ #define IEEE80211_FHT_STBC_TX 0x40000000 /* CONF: STBC tx enabled */ #define IEEE80211_FHT_STBC_RX 0x80000000 /* CONF: STBC rx enabled */ #define IEEE80211_FHT_BITS \ "\20\1NONHT_PR" \ "\23GF\24HT\25AMPDU_TX\26AMPDU_TX" \ "\27AMSDU_TX\30AMSDU_RX\31USEHT40\32PUREN\33SHORTGI20\34SHORTGI40" \ "\35HTCOMPAT\36RIFS\37STBC_TX\40STBC_RX" #define IEEE80211_FVEN_BITS "\20" /* ic_caps/iv_caps: device driver capabilities */ /* 0x2e available */ #define IEEE80211_C_STA 0x00000001 /* CAPABILITY: STA available */ #define IEEE80211_C_8023ENCAP 0x00000002 /* CAPABILITY: 802.3 encap */ #define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */ #define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/ #define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */ #define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */ #define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */ #define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */ #define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */ #define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */ #define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */ #define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */ #define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */ #define IEEE80211_C_DFS 0x00020000 /* CAPABILITY: DFS/radar avail*/ #define IEEE80211_C_MBSS 0x00040000 /* CAPABILITY: MBSS available */ #define IEEE80211_C_SWSLEEP 0x00080000 /* CAPABILITY: do sleep here */ /* 0x7c0000 available */ #define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */ #define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */ #define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/ #define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */ #define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */ #define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */ /* 0x10000000 reserved */ #define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */ #define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */ #define IEEE80211_C_TDMA 0x80000000 /* CAPABILITY: TDMA avail */ /* XXX protection/barker? */ #define IEEE80211_C_OPMODE \ (IEEE80211_C_STA | IEEE80211_C_IBSS | IEEE80211_C_HOSTAP | \ IEEE80211_C_AHDEMO | IEEE80211_C_MONITOR | IEEE80211_C_WDS | \ IEEE80211_C_TDMA | IEEE80211_C_MBSS) #define IEEE80211_C_BITS \ "\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \ "\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \ "\21MONITOR\22DFS\23MBSS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \ "\37TXFRAG\40TDMA" /* * ic_htcaps/iv_htcaps: HT-specific device/driver capabilities * * NB: the low 16-bits are the 802.11 definitions, the upper * 16-bits are used to define s/w/driver capabilities. */ #define IEEE80211_HTC_AMPDU 0x00010000 /* CAPABILITY: A-MPDU tx */ #define IEEE80211_HTC_AMSDU 0x00020000 /* CAPABILITY: A-MSDU tx */ /* NB: HT40 is implied by IEEE80211_HTCAP_CHWIDTH40 */ #define IEEE80211_HTC_HT 0x00040000 /* CAPABILITY: HT operation */ #define IEEE80211_HTC_SMPS 0x00080000 /* CAPABILITY: MIMO power save*/ #define IEEE80211_HTC_RIFS 0x00100000 /* CAPABILITY: RIFS support */ #define IEEE80211_HTC_RXUNEQUAL 0x00200000 /* CAPABILITY: RX unequal MCS */ #define IEEE80211_HTC_RXMCS32 0x00400000 /* CAPABILITY: MCS32 support */ #define IEEE80211_HTC_TXUNEQUAL 0x00800000 /* CAPABILITY: TX unequal MCS */ #define IEEE80211_HTC_TXMCS32 0x01000000 /* CAPABILITY: MCS32 suport */ #define IEEE80211_C_HTCAP_BITS \ "\20\1LDPC\2CHWIDTH40\5GREENFIELD\6SHORTGI20\7SHORTGI40\10TXSTBC" \ "\21AMPDU\22AMSDU\23HT\24SMPS\25RIFS" +int ic_printf(struct ieee80211com *, const char *, ...) __printflike(2, 3); void ieee80211_ifattach(struct ieee80211com *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); void ieee80211_ifdetach(struct ieee80211com *); int ieee80211_vap_setup(struct ieee80211com *, struct ieee80211vap *, const char name[IFNAMSIZ], int unit, enum ieee80211_opmode opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t macaddr[IEEE80211_ADDR_LEN]); int ieee80211_vap_attach(struct ieee80211vap *, ifm_change_cb_t, ifm_stat_cb_t); void ieee80211_vap_detach(struct ieee80211vap *); const struct ieee80211_rateset *ieee80211_get_suprates(struct ieee80211com *ic, const struct ieee80211_channel *); void ieee80211_announce(struct ieee80211com *); void ieee80211_announce_channels(struct ieee80211com *); void ieee80211_drain(struct ieee80211com *); void ieee80211_media_init(struct ieee80211com *); struct ieee80211com *ieee80211_find_vap(const uint8_t mac[IEEE80211_ADDR_LEN]); int ieee80211_media_change(struct ifnet *); void ieee80211_media_status(struct ifnet *, struct ifmediareq *); int ieee80211_ioctl(struct ifnet *, u_long, caddr_t); int ieee80211_rate2media(struct ieee80211com *, int, enum ieee80211_phymode); int ieee80211_media2rate(int); int ieee80211_mhz2ieee(u_int, u_int); int ieee80211_chan2ieee(struct ieee80211com *, const struct ieee80211_channel *); u_int ieee80211_ieee2mhz(u_int, u_int); struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *, int freq, int flags); struct ieee80211_channel *ieee80211_find_channel_byieee(struct ieee80211com *, int ieee, int flags); int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode); enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *); uint32_t ieee80211_mac_hash(const struct ieee80211com *, const uint8_t addr[IEEE80211_ADDR_LEN]); char ieee80211_channel_type_char(const struct ieee80211_channel *c); void ieee80211_radiotap_attach(struct ieee80211com *, struct ieee80211_radiotap_header *th, int tlen, uint32_t tx_radiotap, struct ieee80211_radiotap_header *rh, int rlen, uint32_t rx_radiotap); void ieee80211_radiotap_attachv(struct ieee80211com *, struct ieee80211_radiotap_header *th, int tlen, int n_tx_v, uint32_t tx_radiotap, struct ieee80211_radiotap_header *rh, int rlen, int n_rx_v, uint32_t rx_radiotap); void ieee80211_radiotap_detach(struct ieee80211com *); void ieee80211_radiotap_vattach(struct ieee80211vap *); void ieee80211_radiotap_vdetach(struct ieee80211vap *); void ieee80211_radiotap_chan_change(struct ieee80211com *); void ieee80211_radiotap_tx(struct ieee80211vap *, struct mbuf *); void ieee80211_radiotap_rx(struct ieee80211vap *, struct mbuf *); void ieee80211_radiotap_rx_all(struct ieee80211com *, struct mbuf *); static __inline int ieee80211_radiotap_active(const struct ieee80211com *ic) { return (ic->ic_flags_ext & IEEE80211_FEXT_BPF) != 0; } static __inline int ieee80211_radiotap_active_vap(const struct ieee80211vap *vap) { return (vap->iv_flags_ext & IEEE80211_FEXT_BPF) || vap->iv_ic->ic_montaps != 0; } /* * Enqueue a task on the state thread. */ static __inline void ieee80211_runtask(struct ieee80211com *ic, struct task *task) { taskqueue_enqueue(ic->ic_tq, task); } /* * Wait for a queued task to complete. */ static __inline void ieee80211_draintask(struct ieee80211com *ic, struct task *task) { taskqueue_drain(ic->ic_tq, task); } /* * Key update synchronization methods. XXX should not be visible. */ static __inline void ieee80211_key_update_begin(struct ieee80211vap *vap) { vap->iv_key_update_begin(vap); } static __inline void ieee80211_key_update_end(struct ieee80211vap *vap) { vap->iv_key_update_end(vap); } /* * XXX these need to be here for IEEE80211_F_DATAPAD */ /* * Return the space occupied by the 802.11 header and any * padding required by the driver. This works for a * management or data frame. */ static __inline int ieee80211_hdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_hdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(uint32_t)); return size; } /* * Like ieee80211_hdrspace, but handles any type of frame. */ static __inline int ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data) { int size = ieee80211_anyhdrsize(data); if (ic->ic_flags & IEEE80211_F_DATAPAD) size = roundup(size, sizeof(uint32_t)); return size; } /* * Notify a vap that beacon state has been updated. */ static __inline void ieee80211_beacon_notify(struct ieee80211vap *vap, int what) { if (vap->iv_state == IEEE80211_S_RUN) vap->iv_update_beacon(vap, what); } /* * Calculate HT channel promotion flags for a channel. * XXX belongs in ieee80211_ht.h but needs IEEE80211_FHT_* */ static __inline int ieee80211_htchanflags(const struct ieee80211_channel *c) { return IEEE80211_IS_CHAN_HT40(c) ? IEEE80211_FHT_HT | IEEE80211_FHT_USEHT40 : IEEE80211_IS_CHAN_HT(c) ? IEEE80211_FHT_HT : 0; } /* * Fetch the current TX power (cap) for the given node. * * This includes the node and ic/vap TX power limit as needed, * but it doesn't take into account any per-rate limit. */ static __inline uint16_t ieee80211_get_node_txpower(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; uint16_t txpower; txpower = ni->ni_txpower; txpower = MIN(txpower, ic->ic_txpowlimit); if (ic->ic_curchan != NULL) { txpower = MIN(txpower, 2 * ic->ic_curchan->ic_maxregpower); txpower = MIN(txpower, ic->ic_curchan->ic_maxpower); } return (txpower); } /* * Debugging facilities compiled in when IEEE80211_DEBUG is defined. * * The intent is that any problem in the net80211 layer can be * diagnosed by inspecting the statistics (dumped by the wlanstats * program) and/or the msgs generated by net80211. Messages are * broken into functional classes and can be controlled with the * wlandebug program. Certain of these msg groups are for facilities * that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1XSM). */ #define IEEE80211_MSG_11N 0x80000000 /* 11n mode debug */ #define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */ #define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */ #define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */ #define IEEE80211_MSG_INPUT 0x08000000 /* input handling */ #define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */ #define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */ #define IEEE80211_MSG_NODE 0x01000000 /* node handling */ #define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */ #define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */ #define IEEE80211_MSG_SCAN 0x00200000 /* scanning */ #define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */ #define IEEE80211_MSG_STATE 0x00080000 /* state machine */ #define IEEE80211_MSG_POWER 0x00040000 /* power save handling */ #define IEEE80211_MSG_HWMP 0x00020000 /* hybrid mesh protocol */ #define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */ #define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */ #define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */ #define IEEE80211_MSG_MESH 0x00002000 /* mesh networking */ #define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */ #define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */ #define IEEE80211_MSG_WME 0x00000400 /* WME protocol */ #define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */ #define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */ #define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */ #define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */ #define IEEE80211_MSG_RATECTL 0x00000020 /* tx rate control */ #define IEEE80211_MSG_ACTION 0x00000010 /* action frame handling */ #define IEEE80211_MSG_WDS 0x00000008 /* WDS handling */ #define IEEE80211_MSG_IOCTL 0x00000004 /* ioctl handling */ #define IEEE80211_MSG_TDMA 0x00000002 /* TDMA handling */ #define IEEE80211_MSG_ANY 0xffffffff /* anything */ #define IEEE80211_MSG_BITS \ "\20\2TDMA\3IOCTL\4WDS\5ACTION\6RATECTL\7ROAM\10INACT\11DOTH\12SUPERG" \ "\13WME\14ACL\15WPA\16RADKEYS\17RADDUMP\20RADIUS\21DOT1XSM\22HWMP" \ "\23POWER\24STATE\25OUTPUT\26SCAN\27AUTH\30ASSOC\31NODE\32ELEMID" \ "\33XRATE\34INPUT\35CRYPTO\36DUPMPKTS\37DEBUG\04011N" #ifdef IEEE80211_DEBUG #define ieee80211_msg(_vap, _m) ((_vap)->iv_debug & (_m)) #define IEEE80211_DPRINTF(_vap, _m, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note(_vap, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_mac(_vap, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_mac(_vap, _mac, _fmt, __VA_ARGS__); \ } while (0) #define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) do { \ if (ieee80211_msg(_vap, _m)) \ ieee80211_note_frame(_vap, _wh, _fmt, __VA_ARGS__); \ } while (0) void ieee80211_note(const struct ieee80211vap *, const char *, ...); void ieee80211_note_mac(const struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], const char *, ...); void ieee80211_note_frame(const struct ieee80211vap *, const struct ieee80211_frame *, const char *, ...); #define ieee80211_msg_debug(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_DEBUG) #define ieee80211_msg_dumppkts(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_DUMPPKTS) #define ieee80211_msg_input(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_INPUT) #define ieee80211_msg_radius(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADIUS) #define ieee80211_msg_dumpradius(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADDUMP) #define ieee80211_msg_dumpradkeys(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_RADKEYS) #define ieee80211_msg_scan(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_SCAN) #define ieee80211_msg_assoc(_vap) \ ((_vap)->iv_debug & IEEE80211_MSG_ASSOC) /* * Emit a debug message about discarding a frame or information * element. One format is for extracting the mac address from * the frame header; the other is for when a header is not * available or otherwise appropriate. */ #define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_frame(_vap, _wh, _type, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_ie(_vap, _wh, _type, _fmt, __VA_ARGS__);\ } while (0) #define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) do { \ if ((_vap)->iv_debug & (_m)) \ ieee80211_discard_mac(_vap, _mac, _type, _fmt, __VA_ARGS__);\ } while (0) void ieee80211_discard_frame(const struct ieee80211vap *, const struct ieee80211_frame *, const char *type, const char *fmt, ...); void ieee80211_discard_ie(const struct ieee80211vap *, const struct ieee80211_frame *, const char *type, const char *fmt, ...); void ieee80211_discard_mac(const struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], const char *type, const char *fmt, ...); #else #define IEEE80211_DPRINTF(_vap, _m, _fmt, ...) #define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) #define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) #define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) #define ieee80211_msg_dumppkts(_vap) 0 #define ieee80211_msg(_vap, _m) 0 #define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) #define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) #define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) #endif #endif /* _NET80211_IEEE80211_VAR_H_ */