Index: stable/10/sys/arm/conf/BEAGLEBONE =================================================================== --- stable/10/sys/arm/conf/BEAGLEBONE (revision 283367) +++ stable/10/sys/arm/conf/BEAGLEBONE (revision 283368) @@ -1,162 +1,162 @@ # # BEAGLEBONE -- Custom configuration for the BeagleBone ARM development # platforms, check out http://www.beagleboard.org/bone and # http://www.beagleboard.org/black. This kernel config file is used for the # original BeagleBone and the BeagleBone Black. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident BEAGLEBONE include "../ti/am335x/std.am335x" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS server support -#options NFSD +#options NFSD # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:mmcsd0s2\" # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c device am335x_pmic # AM335x Power Management IC (TPC65217) device am335x_rtc # RTC support (power management only) # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # GPIO device gpio device gpioled # ADC support device ti_adc # Watchdog support # If we don't enable the watchdog driver, the system could potentially # reboot automatically because the boot loader might have enabled the # watchdog. device ti_wdt # TI Programmable Realtime Unit support device ti_pruss # Mailbox support device ti_mbox # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device musb device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smscphy device cpsw device bpf # USB Ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet # Device mode support and USFS template device usb_template # Control of the gadget device usfs # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=beaglebone.dts Index: stable/10/sys/arm/conf/CNS11XXNAS =================================================================== --- stable/10/sys/arm/conf/CNS11XXNAS (revision 283367) +++ stable/10/sys/arm/conf/CNS11XXNAS (revision 283368) @@ -1,125 +1,125 @@ # CNS11XXNAS - StarSemi STR9104/Cavium CNS1102 NAS # kernel configuration file for FreeBSD/arm # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CNS11XXNAS #options PHYSADDR=0x10000000 #options KERNPHYSADDR=0x10200000 #options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm #options FLASHADDR=0x50000000 #options LOADERRAMADDR=0x00000000 include "../cavium/cns11xx/std.econa" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options HZ=100 options DEVICE_POLLING # Debugging for use in -current options KDB #options GDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles ##options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC #options COMPAT_FREEBSD5 #options COMPAT_FREEBSD6 #options COMPAT_FREEBSD7n options SCHED_ULE # ULE scheduler #options SCHED_4BSD # 4BSD scheduler options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID Partition Tables. #options GEOM_PART_EBR #options GEOM_PART_EBR_COMPAT options GEOM_LABEL # Provides labelization options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server #options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options MUTEX_NOINLINE # Mutex inlines are space hogs options RWLOCK_NOINLINE # rwlock inlines are space hogs options SX_NOINLINE # sx inliens are space hogs #options BOOTP #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=npe0 #options BOOTP_COMPAT #device pci device uart device firmware device mii # Minimal mii routines device ether device bpf device loop device md -device random # Entropy device +device random # Entropy device device usb #options USB_DEBUG device ohci device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass -device cfi +device cfi #device udav # Davicom DM9601E USB device geom_label device geom_journal -device geom_part_bsd +device geom_part_bsd options ROOTDEVNAME=\"ufs:da0s1a\" Index: stable/10/sys/arm/conf/CUBIEBOARD =================================================================== --- stable/10/sys/arm/conf/CUBIEBOARD (revision 283367) +++ stable/10/sys/arm/conf/CUBIEBOARD (revision 283368) @@ -1,145 +1,145 @@ # # CUBIEBOARD -- Custom configuration for the CUBIEBOARD ARM development # platform, check out http://www.cubieboard.org # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD include "../allwinner/std.a10" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" # MMC/SD/SDIO Card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers -#options ATA_STATIC_ID # Static device numbering +#options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf device emac # USB ethernet support, requires miibus device miibus # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard.dts Index: stable/10/sys/arm/conf/CUBIEBOARD2 =================================================================== --- stable/10/sys/arm/conf/CUBIEBOARD2 (revision 283367) +++ stable/10/sys/arm/conf/CUBIEBOARD2 (revision 283368) @@ -1,146 +1,146 @@ # # CUBIEBOARD2 -- Custom configuration for the CUBIEBOARD2 ARM development # platform, check out http://www.cubieboard.org # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD2 include "../allwinner/a20/std.a20" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" # MMC/SD/SDIO Card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers -#options ATA_STATIC_ID # Static device numbering +#options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf device emac # USB ethernet support, requires miibus device miibus # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard2.dts Index: stable/10/sys/arm/conf/DIGI-CCWMX53 =================================================================== --- stable/10/sys/arm/conf/DIGI-CCWMX53 (revision 283367) +++ stable/10/sys/arm/conf/DIGI-CCWMX53 (revision 283368) @@ -1,38 +1,38 @@ # Kernel configuration for Digi ConnectCore Wi-i.MX53 boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE include "IMX53" ident DIGI-CCWMX53 -makeoptions WITHOUT_MODULES="ahc" +makeoptions WITHOUT_MODULES="ahc" # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 #options ROOTDEVNAME=\"ufs:ada0s2a\" # Flattened Device Tree -options FDT_DTB_STATIC -makeoptions FDT_DTS_FILE=digi-ccwmx53.dts +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=digi-ccwmx53.dts Index: stable/10/sys/arm/conf/DOCKSTAR =================================================================== --- stable/10/sys/arm/conf/DOCKSTAR (revision 283367) +++ stable/10/sys/arm/conf/DOCKSTAR (revision 283368) @@ -1,169 +1,169 @@ # # Custom kernel for Seagate DockStar (Marvell SheevaPlug based) devices. # # $FreeBSD$ # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ # ident DOCKSTAR include "../mv/kirkwood/std.db88f6xxx" makeoptions FDT_DTS_FILE=dockstar.dts makeoptions MODULES_OVERRIDE="" options SOC_MV_KIRKWOOD options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options SOFTUPDATES options CD9660 # ISO 9660 filesystem options FFS # Berkeley Fast Filesystem options TMPFS # Efficient memory filesystem options MSDOSFS # MS DOS File System (FAT, FAT32) options NULLFS # NULL filesystem options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_ELI # Disk encryption. options GEOM_LABEL # Providers labelization. options GEOM_PART_GPT # GPT partitioning # Flattened Device Tree device fdt options FDT options FDT_DTB_STATIC # Misc pseudo devices device bpf # Required for DHCP device faith # IPv6-to-IPv4 relaying (translation) device firmware # firmware(9) required for USB wlan device gif # IPv6 and IPv4 tunneling device loop # Network loopback -device md # Memory/malloc disk +device md # Memory/malloc disk device pty # BSD-style compatibility pseudo ttys device random # Entropy device -device tun # Packet tunnel. +device tun # Packet tunnel. device ether # Required for all ethernet devices -device vlan # 802.1Q VLAN support +device vlan # 802.1Q VLAN support device wlan # 802.11 WLAN support # cam support for umass and ahci device scbus device pass device da # Serial ports device uart # Networking device mge # Marvell Gigabit Ethernet controller device mii device e1000phy # USB options USB_HOST_ALIGN=32 # Align DMA to cacheline -#options USB_DEBUG # Compile in USB debug support -device usb # Basic usb support -device ehci # USB host controller -device umass # Mass storage -device uhid # Human-interface devices -device rum # Ralink Technology RT2501USB wireless NICs -device uath # Atheros AR5523 wireless NICs -device ural # Ralink Technology RT2500USB wireless NICs -device zyd # ZyDAS zb1211/zb1211b wireless NICs -device urtw # Realtek RTL8187B/L USB -device upgt # Conexant/Intersil PrismGT SoftMAC USB -device u3g # USB-based 3G modems (Option, Huawei, Sierra) +#options USB_DEBUG # Compile in USB debug support +device usb # Basic usb support +device ehci # USB host controller +device umass # Mass storage +device uhid # Human-interface devices +device rum # Ralink Technology RT2501USB wireless NICs +device uath # Atheros AR5523 wireless NICs +device ural # Ralink Technology RT2500USB wireless NICs +device zyd # ZyDAS zb1211/zb1211b wireless NICs +device urtw # Realtek RTL8187B/L USB +device upgt # Conexant/Intersil PrismGT SoftMAC USB +device u3g # USB-based 3G modems (Option, Huawei, Sierra) # I2C (TWSI) device iic device iicbus # Sound -device sound -device snd_uaudio +device sound +device snd_uaudio #crypto -device cesa # Marvell security engine -device crypto -device cryptodev +device cesa # Marvell security engine +device crypto +device cryptodev # IPSec -device enc -options IPSEC -options IPSEC_NAT_T -options TCP_SIGNATURE # include support for RFC 2385 +device enc +options IPSEC +options IPSEC_NAT_T +options TCP_SIGNATURE # include support for RFC 2385 # IPFW -options IPFIREWALL -options IPFIREWALL_DEFAULT_TO_ACCEPT -options IPFIREWALL_VERBOSE -options IPFIREWALL_VERBOSE_LIMIT=100 -options IPFIREWALL_NAT -options LIBALIAS -options DUMMYNET -options IPDIVERT +options IPFIREWALL +options IPFIREWALL_DEFAULT_TO_ACCEPT +options IPFIREWALL_VERBOSE +options IPFIREWALL_VERBOSE_LIMIT=100 +options IPFIREWALL_NAT +options LIBALIAS +options DUMMYNET +options IPDIVERT #PF -device pf -device pflog -device pfsync +device pf +device pflog +device pfsync # ALTQ, required for PF -options ALTQ # Basic ALTQ support -options ALTQ_CBQ # Class Based Queueing -options ALTQ_RED # Random Early Detection -options ALTQ_RIO # RED In/Out -options ALTQ_HFSC # Hierarchical Packet Scheduler -options ALTQ_CDNR # Traffic conditioner -options ALTQ_PRIQ # Priority Queueing -options ALTQ_NOPCC # Required if the TSC is unusable +options ALTQ # Basic ALTQ support +options ALTQ_CBQ # Class Based Queueing +options ALTQ_RED # Random Early Detection +options ALTQ_RIO # RED In/Out +options ALTQ_HFSC # Hierarchical Packet Scheduler +options ALTQ_CDNR # Traffic conditioner +options ALTQ_PRIQ # Priority Queueing +options ALTQ_NOPCC # Required if the TSC is unusable #options ALTQ_DEBUG # Debugging -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER options ALT_BREAK_TO_DEBUGGER options DDB options KDB #options DIAGNOSTIC #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB # Enable these options for nfs root configured via BOOTP. options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options BOOTP #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=mge0 # If not using BOOTP, use something like one of these... #options ROOTDEVNAME=\"ufs:/dev/da0a\" options ROOTDEVNAME=\"ufs:/dev/da0s1a\" #options ROOTDEVNAME=\"ufs:/dev/da0p10\" #options ROOTDEVNAME=\"nfs:192.168.0.254/dreamplug\" Index: stable/10/sys/arm/conf/DREAMPLUG-1001 =================================================================== --- stable/10/sys/arm/conf/DREAMPLUG-1001 (revision 283367) +++ stable/10/sys/arm/conf/DREAMPLUG-1001 (revision 283368) @@ -1,185 +1,185 @@ # Kernel config for GlobalScale Technologies DreamPlug version 1001. # # This is for units that are version 10, revision 01, with NOR SPI flash. # These units are identified with the number "1001" on the S/N label. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ # ident DREAMPLUG-1001 include "../mv/kirkwood/std.db88f6xxx" makeoptions FDT_DTS_FILE=dreamplug-1001.dts makeoptions MODULES_OVERRIDE="" options SOC_MV_KIRKWOOD options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options SOFTUPDATES options TMPFS # Efficient memory filesystem options CD9660 # ISO 9660 filesystem options FFS # Berkeley Fast Filesystem options MSDOSFS # MS DOS File System (FAT, FAT32) options NULLFS # NULL filesystem options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_ELI # Disk encryption. options GEOM_LABEL # Providers labelization. options GEOM_PART_GPT # GPT partitioning # Flattened Device Tree device fdt options FDT options FDT_DTB_STATIC # Misc pseudo devices device bpf # Required for DHCP device faith # IPv6-to-IPv4 relaying (translation) -device firmware # firmware(9) required for USB wlan -device gif # IPv6 and IPv4 tunneling +device firmware # firmware(9) required for USB wlan +device gif # IPv6 and IPv4 tunneling device loop # Network loopback -device md # Memory/malloc disk +device md # Memory/malloc disk device pty # BSD-style compatibility pseudo ttys device random # Entropy device -device tun # Packet tunnel. +device tun # Packet tunnel. device ether # Required for all ethernet devices -device vlan # 802.1Q VLAN support +device vlan # 802.1Q VLAN support device wlan # 802.11 WLAN support # cam support for umass and ahci device scbus device pass device da -device cd +device cd # Serial ports device uart # Networking device mge # Marvell Gigabit Ethernet controller device mii device e1000phy # USB options USB_HOST_ALIGN=32 # Align DMA to cacheline -#options USB_DEBUG # Compile in USB debug support -device usb # Basic usb support -device ehci # USB host controller -device umass # Mass storage -device uhid # Human-interface devices -device rum # Ralink Technology RT2501USB wireless NICs -device uath # Atheros AR5523 wireless NICs -device ural # Ralink Technology RT2500USB wireless NICs -device zyd # ZyDAS zb1211/zb1211b wireless NICs -device urtw # Realtek RTL8187B/L USB -device upgt # Conexant/Intersil PrismGT SoftMAC USB -device u3g # USB-based 3G modems (Option, Huawei, Sierra) +#options USB_DEBUG # Compile in USB debug support +device usb # Basic usb support +device ehci # USB host controller +device umass # Mass storage +device uhid # Human-interface devices +device rum # Ralink Technology RT2501USB wireless NICs +device uath # Atheros AR5523 wireless NICs +device ural # Ralink Technology RT2500USB wireless NICs +device zyd # ZyDAS zb1211/zb1211b wireless NICs +device urtw # Realtek RTL8187B/L USB +device upgt # Conexant/Intersil PrismGT SoftMAC USB +device u3g # USB-based 3G modems (Option, Huawei, Sierra) # I2C (TWSI) device iic device iicbus # SATA device mvs device ahci # Sound -device sound -device snd_uaudio +device sound +device snd_uaudio #crypto -device cesa # Marvell security engine -device crypto -device cryptodev +device cesa # Marvell security engine +device crypto +device cryptodev # IPSec -device enc -options IPSEC -options IPSEC_NAT_T -options TCP_SIGNATURE # include support for RFC 2385 +device enc +options IPSEC +options IPSEC_NAT_T +options TCP_SIGNATURE # include support for RFC 2385 # IPFW -options IPFIREWALL -options IPFIREWALL_DEFAULT_TO_ACCEPT -options IPFIREWALL_VERBOSE -options IPFIREWALL_VERBOSE_LIMIT=100 -options IPFIREWALL_NAT -options LIBALIAS -options DUMMYNET -options IPDIVERT +options IPFIREWALL +options IPFIREWALL_DEFAULT_TO_ACCEPT +options IPFIREWALL_VERBOSE +options IPFIREWALL_VERBOSE_LIMIT=100 +options IPFIREWALL_NAT +options LIBALIAS +options DUMMYNET +options IPDIVERT #PF -device pf -device pflog -device pfsync +device pf +device pflog +device pfsync # ALTQ, required for PF -options ALTQ # Basic ALTQ support -options ALTQ_CBQ # Class Based Queueing -options ALTQ_RED # Random Early Detection -options ALTQ_RIO # RED In/Out -options ALTQ_HFSC # Hierarchical Packet Scheduler -options ALTQ_CDNR # Traffic conditioner -options ALTQ_PRIQ # Priority Queueing -options ALTQ_NOPCC # Required if the TSC is unusable +options ALTQ # Basic ALTQ support +options ALTQ_CBQ # Class Based Queueing +options ALTQ_RED # Random Early Detection +options ALTQ_RIO # RED In/Out +options ALTQ_HFSC # Hierarchical Packet Scheduler +options ALTQ_CDNR # Traffic conditioner +options ALTQ_PRIQ # Priority Queueing +options ALTQ_NOPCC # Required if the TSC is unusable #options ALTQ_DEBUG # Debugging -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER options ALT_BREAK_TO_DEBUGGER options DDB options KDB #options DIAGNOSTIC #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB # Enable these options for nfs root configured via BOOTP. options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options BOOTP #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=mge0 # If not using BOOTP, use something like one of these... #options ROOTDEVNAME=\"ufs:/dev/da1a\" options ROOTDEVNAME=\"ufs:/dev/da1s1a\" #options ROOTDEVNAME=\"ufs:/dev/da1p10\" #options ROOTDEVNAME=\"nfs:192.168.0.254/dreamplug\" # To use this configuration with the (rare) model 1001N (nand flash), # create a kernel config file that looks like this: # # include DREAMPLUG-1001 -# nomakeoptions FDT_DTS_FILE +# nomakeoptions FDT_DTS_FILE # makeoptions FDT_DTS_FILE=dreamplug-1001N.dts # device nand Index: stable/10/sys/arm/conf/EFIKA_MX =================================================================== --- stable/10/sys/arm/conf/EFIKA_MX (revision 283367) +++ stable/10/sys/arm/conf/EFIKA_MX (revision 283368) @@ -1,193 +1,193 @@ # # Kernel configuration for Efika MX Smarttop/Smartbook boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident EFIKA_MX include "../freescale/imx/std.imx51" -makeoptions WITHOUT_MODULES="ahc" +makeoptions WITHOUT_MODULES="ahc" options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS #options MD_ROOT # MD is a potential root device options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options INCLUDE_CONFIG_FILE # Include this file in kernel options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options GDB # Support remote GDB options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 options ROOTDEVNAME=\"ufs:ada0s2a\" # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # Debugging support. Always need this: options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: options DDB # Support DDB. #options GDB # Support remote GDB. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER device ata device atapci # Only for helper functions device imxata options ATA_STATIC_ID # Static device numbering device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB Ethernet, requires miibus device miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=efikamx.dts # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support device sc device kbdmux -options SC_DFLT_FONT # compile font in -makeoptions SC_DFLT_FONT=cp437 +options SC_DFLT_FONT # compile font in +makeoptions SC_DFLT_FONT=cp437 device ukbd # Allow keyboard like HIDs to control console device ums Index: stable/10/sys/arm/conf/EXYNOS5.common =================================================================== --- stable/10/sys/arm/conf/EXYNOS5.common (revision 283367) +++ stable/10/sys/arm/conf/EXYNOS5.common (revision 283368) @@ -1,134 +1,134 @@ # # Kernel configuration for Samsung Exynos 5 SoC. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" makeoptions WERROR="-Werror" options HZ=100 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 options ROOTDEVNAME=\"ufs:/dev/da0\" # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG -#options USB_REQ_DEBUG -#options USB_VERBOSE +#options USB_REQ_DEBUG +#options USB_VERBOSE #device musb device ehci #device ohci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs # Serial ports device uart # I2C (TWSI) device iic device iicbus # Ethernet device ether device mii device smsc device smscphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter Index: stable/10/sys/arm/conf/HL201 =================================================================== --- stable/10/sys/arm/conf/HL201 (revision 283367) +++ stable/10/sys/arm/conf/HL201 (revision 283368) @@ -1,137 +1,137 @@ # Kernel configuration for the AT91SAM9G20 based Hot-e configuration file # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident HL201 include "../at91/std.hl201" #To statically compile in device wiring instead of /boot/device.hints hints "HL201.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NANDFS # NAND file system options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server #options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 #options BOOTP_COMPAT options ALT_BREAK_TO_DEBUGGER options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device random device loop device ether device uart device ate device mii #device lxtphy # Debugging for use in -current #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device md device bpf # USB support device ohci # OHCI localbus->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device uhid # "Human Interface Devices" #device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da # USB Ethernet, requires miibus device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm options ROOTDEVNAME=\"ufs:da0s1a\" # NAND Flash - my board as 128MB Samsung part, YMMV. device nand # NAND interface on CS3 # Coming soon, but not yet #options FDT #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=hl201.dts options EARLY_PRINTF -options SOCDEV_PA=0xfc000000 +options SOCDEV_PA=0xfc000000 options SOCDEV_VA=0xdc000000 Index: stable/10/sys/arm/conf/IMX53 =================================================================== --- stable/10/sys/arm/conf/IMX53 (revision 283367) +++ stable/10/sys/arm/conf/IMX53 (revision 283368) @@ -1,174 +1,174 @@ # # Kernel configuration for i.MX53 boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX53 include "../freescale/imx/std.imx53" options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options INCLUDE_CONFIG_FILE # Include this file in kernel options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options GDB # Support remote GDB options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # Ethernet device ffec # Freescale Fast Ethernet Controller device miibus # Standard mii bus # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER device ata device atapci # Only for helper functions device imxata options ATA_STATIC_ID # Static device numbering device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ukbd # Allow keyboard like HIDs to control console device ums # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # MMC #device sdhci # SD controller #device mmc # SD/MMC protocol #device mmcsd # SDCard disk device # Flattened Device Tree options FDT # Configure using FDT/DTB data # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support #device sc #device vt #device kbdmux -#options SC_DFLT_FONT # compile font in -#makeoptions SC_DFLT_FONT=cp437 +#options SC_DFLT_FONT # compile font in +#makeoptions SC_DFLT_FONT=cp437 Index: stable/10/sys/arm/conf/IMX53-QSB =================================================================== --- stable/10/sys/arm/conf/IMX53-QSB (revision 283367) +++ stable/10/sys/arm/conf/IMX53-QSB (revision 283368) @@ -1,38 +1,38 @@ # Kernel configuration for Freescale i.MX53 Quick Start Board # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE include "IMX53" ident IMX53-QSB options HZ=250 # 4ms scheduling quantum # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 #options ROOTDEVNAME=\"ufs:ada0s2a\" # Flattened Device Tree -options FDT_DTB_STATIC -makeoptions FDT_DTS_FILE=imx53-qsb.dts +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=imx53-qsb.dts Index: stable/10/sys/arm/conf/IMX6 =================================================================== --- stable/10/sys/arm/conf/IMX6 (revision 283367) +++ stable/10/sys/arm/conf/IMX6 (revision 283368) @@ -1,163 +1,163 @@ # # Kernel configuration for Freescale i.MX6 systems. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX6 include "../freescale/imx/std.imx6" options HZ=500 # Scheduling quantum is 2 milliseconds. options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options INCLUDE_CONFIG_FILE # Include this file in kernel options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options GDB # Support remote GDB. # Other debugging options... options ALT_BREAK_TO_DEBUGGER # Use to enter debugger. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 # U-Boot stuff lives on slice 1, FreeBSD on slice 2. options ROOTDEVNAME=\"ufs:mmcsd0s2a\" # Pseudo devices. device loop # Network loopback device random # Entropy device device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" #device faith # IPv6-to-IPv4 relaying (translation) #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module device ether # Ethernet support device miibus # Required for ethernet device bpf # Berkeley packet filter (required for DHCP) # General-purpose input/output -device gpio +device gpio # Serial (COM) ports device uart # Multi-uart driver # SDCard device sdhci # SD controller device mmc # SD/MMC protocol device mmcsd # SDCard disk device # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB modems #device ukbd # Allow keyboard like HIDs to control console #device ums # USB mouse # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support # Wandboard has no video console support yet. #device sc #device kbdmux #options SC_DFLT_FONT # compile font in #makeoptions SC_DFLT_FONT=cp437 # Flattened Device Tree options FDT # Configure using FDT/DTB data # SoC-specific devices device ffec # Freescale Fast Ethernet Controller device fsliic # Freescale i2c/iic device iic # iic protocol device iicbus # iic bus #device imxwdt # Watchdog. WARNING: can't be disabled!!! Index: stable/10/sys/arm/conf/SAM9260EK =================================================================== --- stable/10/sys/arm/conf/SAM9260EK (revision 283367) +++ stable/10/sys/arm/conf/SAM9260EK (revision 283368) @@ -1,185 +1,185 @@ # Kernel configuration for Atmel SAM9260-EK eval board # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident SAM9260EK include "../at91/std.sam9260ek" # To statically compile in device wiring instead of /boot/device.hints hints "SAM9260EK.hints" #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions MODULES_OVERRIDE="" options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking #options INET6 # IPv6 communications protocols #options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories #options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device options NANDFS # NAND file system options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme #options GEOM_PART_GPT # GUID Partition Tables. #options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support #options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. #options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) #options AUDIT # Security event auditing #options CAPABILITY_MODE # Capsicum capability mode #options CAPABILITIES # Capsicum capabilities #options MAC # TrustedBSD MAC Framework #options INCLUDE_CONFIG_FILE # Include this file in kernel # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 # alternatively, boot from a MMC/SD memory card #options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" # Alternatively, boot from a USB card. options ROOTDEVNAME=\"ufs:/dev/da0s1a\" # kernel/memory size reduction options MUTEX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING options NO_SYSCTL_DESCR options RWLOCK_NOINLINE # Debugging support. Always need this: #options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: #options DDB # Support DDB. #options GDB # Support remote GDB. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Ethernet device mii # Minimal MII support device ate # Atmel AT91 Ethernet driver # I2C device at91_twi # Atmel AT91 Two-wire Interface device iic # I2C generic I/O device driver device iicbus # I2C bus system device icee # I2C eeprom # MMC/SD # See comment for DataFlash below device at91_mci # Atmel AT91 Multimedia Card Interface options AT91_MCI_HAS_4WIRE # 4 wires options AT91_MCI_SLOT_B # Wired to slot B device mmc # MMC/SD bus device mmcsd # MMC/SD memory card # DataFlash # The DataFlash and MMC card are wired together, so we must pick one or the # other. This is due to pin mux, and also due to the design of the # SAM9260EK board. SLOT A wouldn't have this issue. #device at91_spi # Atmel AT91 Serial Peripheral Interface #device spibus # SPI bus #device at45d # Atmel AT45D #device geom_map # GEOM partition mapping # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD/DVD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER # USB support #options USB_DEBUG # enable debug msgs device ohci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da # watchdog device at91_wdt # Atmel AT91 Watchdog Timer # NAND Flash - Reference design has Samsung 256MB but others possible device nand # NAND interface on CS3 # Coming soon, but not yet #options FDT #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=sam9260ek.dts options EARLY_PRINTF -options SOCDEV_PA=0xfc000000 +options SOCDEV_PA=0xfc000000 options SOCDEV_VA=0xdc000000 Index: stable/10/sys/arm/conf/VERSATILEPB =================================================================== --- stable/10/sys/arm/conf/VERSATILEPB (revision 283367) +++ stable/10/sys/arm/conf/VERSATILEPB (revision 283368) @@ -1,123 +1,123 @@ # # VERSATILEPB - Configuration for QEMU version of Versatile Platform Board # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident VERSATILEPB machine arm armv6 cpu CPU_ARM1176 files "../versatile/files.versatile" makeoptions MODULES_OVERRIDE="" options KERNVIRTADDR=0xc0100000 makeoptions KERNVIRTADDR=0xc0100000 options KERNPHYSADDR=0x00100000 makeoptions KERNPHYSADDR=0x00100000 options PHYSADDR=0x00000000 options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options LINUX_BOOT_ABI # Process metadata passed from Linux boot loaders options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options ROOTDEVNAME=\"ufs:da0s1a\" device bpf device loop device mii device mii_bitbang device smc device smcphy device ether device uart device pl011 device pl190 device pty device snp device pci # SCSI Controllers device sym # NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) # NOTE: serial console is disabled if syscons enabled # Comment following lines for headless setup device sc device kbdmux -options SC_DFLT_FONT # compile font in -makeoptions SC_DFLT_FONT=cp437 +options SC_DFLT_FONT # compile font in +makeoptions SC_DFLT_FONT=cp437 options KDB options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS device md device random # Entropy device # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=versatilepb.dts Index: stable/10/sys/arm/conf/VYBRID =================================================================== --- stable/10/sys/arm/conf/VYBRID (revision 283367) +++ stable/10/sys/arm/conf/VYBRID (revision 283368) @@ -1,157 +1,157 @@ # # Kernel configuration for Vybrid Family boards. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident VYBRID include "../freescale/vybrid/std.vybrid" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" makeoptions WERROR="-Werror" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options NANDFS # NAND Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support #options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 #options ROOTDEVNAME=\"nfs:10.5.0.1:/tftpboot/cosmic\" #options ROOTDEVNAME=\"nandfs:/dev/gnand0s.root\" options ROOTDEVNAME=\"ufs:/dev/da0\" options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. device usb options USB_DEBUG -#options USB_REQ_DEBUG -#options USB_VERBOSE +#options USB_REQ_DEBUG +#options USB_VERBOSE #device musb device ehci #device ohci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs device nand # Serial ports device uart # I2C (TWSI) device iic device iicbus # Ethernet device ether device ffec # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter device sound # Framebuffer device vt device kbdmux options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 device ukbd # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: stable/10 =================================================================== --- stable/10 (revision 283367) +++ stable/10 (revision 283368) Property changes on: stable/10 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r276004