Index: head/usr.sbin/bsdinstall/scripts/zfsboot =================================================================== --- head/usr.sbin/bsdinstall/scripts/zfsboot (revision 283022) +++ head/usr.sbin/bsdinstall/scripts/zfsboot (revision 283023) @@ -1,1606 +1,1610 @@ #!/bin/sh #- # Copyright (c) 2013-2014 Allan Jude # Copyright (c) 2013-2015 Devin Teske # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # $FreeBSD$ # ############################################################ INCLUDES BSDCFG_SHARE="/usr/share/bsdconfig" . $BSDCFG_SHARE/common.subr || exit 1 f_dprintf "%s: loading includes..." "$0" f_include $BSDCFG_SHARE/device.subr f_include $BSDCFG_SHARE/dialog.subr f_include $BSDCFG_SHARE/password/password.subr f_include $BSDCFG_SHARE/variable.subr ############################################################ CONFIGURATION # # Default name of the boot-pool # : ${ZFSBOOT_POOL_NAME:=zroot} # # Default options to use when creating zroot pool # : ${ZFSBOOT_POOL_CREATE_OPTIONS:=-O compress=lz4 -O atime=off} # # Default name for the boot environment parent dataset # : ${ZFSBOOT_BEROOT_NAME:=ROOT} # # Default name for the primany boot environment # : ${ZFSBOOT_BOOTFS_NAME:=default} # # Default Virtual Device (vdev) type to create # : ${ZFSBOOT_VDEV_TYPE:=stripe} # # Should we use sysctl(8) vfs.zfs.min_auto_ashift=12 to force 4K sectors? # : ${ZFSBOOT_FORCE_4K_SECTORS:=1} # # Should we use geli(8) to encrypt the drives? # NB: Automatically enables ZFSBOOT_BOOT_POOL # : ${ZFSBOOT_GELI_ENCRYPTION=} # # Default path to the geli(8) keyfile used in drive encryption # : ${ZFSBOOT_GELI_KEY_FILE:=/boot/encryption.key} # # Create a separate boot pool? # NB: Automatically set when using geli(8) or MBR # : ${ZFSBOOT_BOOT_POOL=} # # Options to use when creating separate boot pool (if any) # : ${ZFSBOOT_BOOT_POOL_CREATE_OPTIONS:=} # # Default name for boot pool when enabled (e.g., geli(8) or MBR) # : ${ZFSBOOT_BOOT_POOL_NAME:=bootpool} # # Default size for boot pool when enabled (e.g., geli(8) or MBR) # : ${ZFSBOOT_BOOT_POOL_SIZE:=2g} # # Default disks to use (always empty unless being scripted) # : ${ZFSBOOT_DISKS:=} # # Default partitioning scheme to use on disks # : ${ZFSBOOT_PARTITION_SCHEME:=GPT} # # How much swap to put on each block device in the boot zpool # NOTE: Value passed to gpart(8); which supports SI unit suffixes. # : ${ZFSBOOT_SWAP_SIZE:=2g} # # Should we use geli(8) to encrypt the swap? # : ${ZFSBOOT_SWAP_ENCRYPTION=} # # Should we use gmirror(8) to mirror the swap? # : ${ZFSBOOT_SWAP_MIRROR=} # # Default ZFS datasets for root zpool # # NOTE: Requires /tmp, /var/tmp, /$ZFSBOOT_BOOTFS_NAME/$ZFSBOOT_BOOTFS_NAME # NOTE: Anything after pound/hash character [#] is ignored as a comment. # f_isset ZFSBOOT_DATASETS || ZFSBOOT_DATASETS=" # DATASET OPTIONS (comma or space separated; or both) # Boot Environment [BE] root and default boot dataset /$ZFSBOOT_BEROOT_NAME mountpoint=none /$ZFSBOOT_BEROOT_NAME/$ZFSBOOT_BOOTFS_NAME mountpoint=/ # Compress /tmp, allow exec but not setuid /tmp mountpoint=/tmp,exec=on,setuid=off # Don't mount /usr so that 'base' files go to the BEROOT /usr mountpoint=/usr,canmount=off # Home directories separated so they are common to all BEs /usr/home # NB: /home is a symlink to /usr/home # Ports tree /usr/ports setuid=off # Source tree (compressed) /usr/src # Create /var and friends /var mountpoint=/var,canmount=off /var/crash exec=off,setuid=off /var/log exec=off,setuid=off /var/mail atime=on /var/tmp setuid=off " # END-QUOTE # # If interactive and the user has not explicitly chosen a vdev type or disks, # make the user confirm scripted/default choices when proceeding to install. # : ${ZFSBOOT_CONFIRM_LAYOUT:=1} ############################################################ GLOBALS # # Format of a line in printf(1) syntax to add to fstab(5) # FSTAB_FMT="%s\t\t%s\t%s\t%s\t\t%s\t%s\n" # # Command strings for various tasks # CHMOD_MODE='chmod %s "%s"' DD_WITH_OPTIONS='dd if="%s" of="%s" %s' ECHO_APPEND='echo "%s" >> "%s"' GELI_ATTACH='geli attach -j - -k "%s" "%s"' GELI_DETACH_F='geli detach -f "%s"' GELI_PASSWORD_INIT='geli init -b -B "%s" -e %s -J - -K "%s" -l 256 -s 4096 "%s"' GPART_ADD='gpart add -t %s "%s"' GPART_ADD_INDEX='gpart add -i %s -t %s "%s"' GPART_ADD_INDEX_WITH_SIZE='gpart add -i %s -t %s -s %s "%s"' GPART_ADD_LABEL='gpart add -l %s -t %s "%s"' GPART_ADD_LABEL_WITH_SIZE='gpart add -l %s -t %s -s %s "%s"' GPART_BOOTCODE='gpart bootcode -b "%s" "%s"' GPART_BOOTCODE_PART='gpart bootcode -b "%s" -p "%s" -i %s "%s"' GPART_CREATE='gpart create -s %s "%s"' GPART_DESTROY_F='gpart destroy -F "%s"' GPART_SET_ACTIVE='gpart set -a active -i %s "%s"' GRAID_DELETE='graid delete "%s"' LN_SF='ln -sf "%s" "%s"' MKDIR_P='mkdir -p "%s"' MOUNT_TYPE='mount -t %s "%s" "%s"' PRINTF_CONF="printf '%s=\"%%s\"\\\n' %s >> \"%s\"" PRINTF_FSTAB='printf "$FSTAB_FMT" "%s" "%s" "%s" "%s" "%s" "%s" >> "%s"' SHELL_TRUNCATE=':> "%s"' SWAP_GMIRROR_LABEL='gmirror label swap %s' SYSCTL_ZFS_MIN_ASHIFT_12='sysctl vfs.zfs.min_auto_ashift=12' UMOUNT='umount "%s"' ZFS_CREATE_WITH_OPTIONS='zfs create %s "%s"' ZFS_SET='zfs set "%s" "%s"' ZFS_UNMOUNT='zfs unmount "%s"' ZPOOL_CREATE_WITH_OPTIONS='zpool create %s "%s" %s %s' ZPOOL_DESTROY='zpool destroy "%s"' ZPOOL_EXPORT='zpool export "%s"' ZPOOL_IMPORT_WITH_OPTIONS='zpool import %s "%s"' ZPOOL_LABELCLEAR_F='zpool labelclear -f "%s"' ZPOOL_SET='zpool set %s "%s"' # # Strings that should be moved to an i18n file and loaded with f_include_lang() # hline_alnum_arrows_punc_tab_enter="Use alnum, arrows, punctuation, TAB or ENTER" hline_arrows_space_tab_enter="Use arrows, SPACE, TAB or ENTER" hline_arrows_tab_enter="Press arrows, TAB or ENTER" msg_an_unknown_error_occurred="An unknown error occurred" msg_back="Back" msg_cancel="Cancel" msg_change_selection="Change Selection" msg_configure_options="Configure Options:" msg_detailed_disk_info="gpart(8) show %s:\n%s\n\ncamcontrol(8) inquiry %s:\n%s\n\n\ncamcontrol(8) identify %s:\n%s\n" msg_disk_info="Disk Info" msg_disk_info_help="Get detailed information on disk device(s)" msg_disk_singular="disk" msg_disk_plural="disks" msg_encrypt_disks="Encrypt Disks?" msg_encrypt_disks_help="Use geli(8) to encrypt all data partitions" msg_error="Error" msg_force_4k_sectors="Force 4K Sectors?" msg_force_4k_sectors_help="Use sysctl(8) vfs.zfs.min_auto_ashift=12 to force 4K sectors" msg_freebsd_installer="FreeBSD Installer" msg_geli_password="Enter a strong passphrase, used to protect your encryption keys. You will be required to enter this passphrase each time the system is booted" msg_geli_setup="Initializing encryption on selected disks,\n this will take several seconds per disk" msg_install="Install" msg_install_desc="Proceed with Installation" msg_install_help="Create ZFS boot pool with displayed options" msg_invalid_boot_pool_size="Invalid boot pool size \`%s'" msg_invalid_disk_argument="Invalid disk argument \`%s'" msg_invalid_index_argument="Invalid index argument \`%s'" msg_invalid_swap_size="Invalid swap size \`%s'" msg_invalid_virtual_device_type="Invalid Virtual Device type \`%s'" msg_last_chance_are_you_sure="Last Chance! Are you sure you want to destroy\nthe current contents of the following disks:\n\n %s" msg_last_chance_are_you_sure_color='\\ZrLast Chance!\\ZR Are you \\Z1sure\\Zn you want to \\Zr\\Z1destroy\\Zn\nthe current contents of the following disks:\n\n %s' msg_mirror_desc="Mirror - n-Way Mirroring" msg_mirror_help="[2+ Disks] Mirroring provides the best performance, but the least storage" msg_missing_disk_arguments="missing disk arguments" msg_missing_one_or_more_scripted_disks="Missing one or more scripted disks!" msg_no="NO" msg_no_disks_present_to_configure="No disk(s) present to configure" msg_no_disks_selected="No disks selected." msg_not_enough_disks_selected="Not enough disks selected. (%u < %u minimum)" msg_null_disk_argument="NULL disk argument" msg_null_index_argument="NULL index argument" msg_null_poolname="NULL poolname" msg_ok="OK" msg_partition_scheme="Partition Scheme" msg_partition_scheme_help="Toggle between GPT and MBR partitioning schemes" msg_please_enter_a_name_for_your_zpool="Please enter a name for your zpool:" msg_please_enter_amount_of_swap_space="Please enter amount of swap space (SI-Unit suffixes\nrecommended; e.g., \`2g' for 2 Gigabytes):" msg_please_select_one_or_more_disks="Please select one or more disks to create a zpool:" msg_pool_name="Pool Name" msg_pool_name_cannot_be_empty="Pool name cannot be empty." msg_pool_name_help="Customize the name of the zpool to be created (Required)" msg_pool_type_disks="Pool Type/Disks:" msg_pool_type_disks_help="Choose type of ZFS Virtual Device and disks to use (Required)" msg_processing_selection="Processing selection..." msg_raidz1_desc="RAID-Z1 - Single Redundant RAID" msg_raidz1_help="[3+ Disks] Withstand failure of 1 disk. Recommended for: 3, 5 or 9 disks" msg_raidz2_desc="RAID-Z2 - Double Redundant RAID" msg_raidz2_help="[4+ Disks] Withstand failure of 2 disks. Recommended for: 4, 6 or 10 disks" msg_raidz3_desc="RAID-Z3 - Triple Redundant RAID" msg_raidz3_help="[5+ Disks] Withstand failure of 3 disks. Recommended for: 5, 7 or 11 disks" msg_rescan_devices="Rescan Devices" msg_rescan_devices_help="Scan for device changes" msg_select="Select" msg_select_a_disk_device="Select a disk device" msg_select_virtual_device_type="Select Virtual Device type:" msg_stripe_desc="Stripe - No Redundancy" msg_stripe_help="[1+ Disks] Striping provides maximum storage but no redundancy" msg_swap_encrypt="Encrypt Swap?" msg_swap_encrypt_help="Encrypt swap partitions with temporary keys, discarded on reboot" msg_swap_invalid="The selected swap size (%s) is invalid. Enter a number optionally followed by units. Example: 2G" msg_swap_mirror="Mirror Swap?" msg_swap_mirror_help="Mirror swap partitions for redundancy, breaks crash dumps" msg_swap_size="Swap Size" msg_swap_size_help="Customize how much swap space is allocated to each selected disk" msg_swap_toosmall="The selected swap size (%s) is to small. Please enter a value greater than 100MB or enter 0 for no swap" msg_these_disks_are_too_small="These disks are too small given the amount of requested\nswap (%s) and/or geli(8) (%s) partitions, which would\ntake 50%% or more of each of the following selected disk\ndevices (not recommended):\n\n %s\n\nRecommend changing partition size(s) and/or selecting a\ndifferent set of devices." msg_uefi_not_supported="The FreeBSD UEFI loader does not currently support booting root-on-ZFS. Your system will need to boot in legacy (CSM) mode.\nDo you want to continue?" msg_unable_to_get_disk_capacity="Unable to get disk capacity of \`%s'" msg_unsupported_partition_scheme="%s is an unsupported partition scheme" msg_user_cancelled="User Cancelled." msg_yes="YES" msg_zfs_configuration="ZFS Configuration" ############################################################ FUNCTIONS # dialog_menu_main # # Display the dialog(1)-based application main menu. # dialog_menu_main() { local title="$DIALOG_TITLE" local btitle="$DIALOG_BACKTITLE" local prompt="$msg_configure_options" local force4k="$msg_no" local usegeli="$msg_no" local swapgeli="$msg_no" local swapmirror="$msg_no" [ "$ZFSBOOT_FORCE_4K_SECTORS" ] && force4k="$msg_yes" [ "$ZFSBOOT_GELI_ENCRYPTION" ] && usegeli="$msg_yes" [ "$ZFSBOOT_SWAP_ENCRYPTION" ] && swapgeli="$msg_yes" [ "$ZFSBOOT_SWAP_MIRROR" ] && swapmirror="$msg_yes" local disks n disks_grammar f_count n $ZFSBOOT_DISKS { [ $n -eq 1 ] && disks_grammar=$msg_disk_singular; } || disks_grammar=$msg_disk_plural # grammar local menu_list=" '>>> $msg_install' '$msg_install_desc' '$msg_install_help' 'T $msg_pool_type_disks' '$ZFSBOOT_VDEV_TYPE: $n $disks_grammar' '$msg_pool_type_disks_help' '- $msg_rescan_devices' '*' '$msg_rescan_devices_help' '- $msg_disk_info' '*' '$msg_disk_info_help' 'N $msg_pool_name' '$ZFSBOOT_POOL_NAME' '$msg_pool_name_help' '4 $msg_force_4k_sectors' '$force4k' '$msg_force_4k_sectors_help' 'E $msg_encrypt_disks' '$usegeli' '$msg_encrypt_disks_help' 'P $msg_partition_scheme' '$ZFSBOOT_PARTITION_SCHEME' '$msg_partition_scheme_help' 'S $msg_swap_size' '$ZFSBOOT_SWAP_SIZE' '$msg_swap_size_help' 'M $msg_swap_mirror' '$swapmirror' '$msg_swap_mirror_help' 'W $msg_swap_encrypt' '$swapgeli' '$msg_swap_encrypt_help' " # END-QUOTE local defaultitem= # Calculated below local hline="$hline_alnum_arrows_punc_tab_enter" local height width rows eval f_dialog_menu_with_help_size height width rows \ \"\$title\" \"\$btitle\" \"\$prompt\" \"\$hline\" $menu_list # Obtain default-item from previously stored selection f_dialog_default_fetch defaultitem local menu_choice menu_choice=$( eval $DIALOG \ --title \"\$title\" \ --backtitle \"\$btitle\" \ --hline \"\$hline\" \ --item-help \ --ok-label \"\$msg_select\" \ --cancel-label \"\$msg_cancel\" \ --default-item \"\$defaultitem\" \ --menu \"\$prompt\" \ $height $width $rows \ $menu_list \ 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD ) local retval=$? f_dialog_data_sanitize menu_choice f_dialog_menutag_store "$menu_choice" # Only update default-item on success [ $retval -eq $DIALOG_OK ] && f_dialog_default_store "$menu_choice" return $retval } # dialog_last_chance $disks ... # # Display a list of the disks that the user is about to destroy. The default # action is to return error status unless the user explicitly (non-default) # selects "Yes" from the noyes dialog. # dialog_last_chance() { local title="$DIALOG_TITLE" local btitle="$DIALOG_BACKTITLE" local prompt # Calculated below local hline="$hline_arrows_tab_enter" local height=8 width=50 prefix=" " local plen=${#prefix} list= line= local max_width=$(( $width - 3 - $plen )) local yes no defaultno extra_args format if [ "$USE_XDIALOG" ]; then yes=ok no=cancel defaultno=default-no extra_args="--wrap --left" format="$msg_last_chance_are_you_sure" else yes=yes no=no defaultno=defaultno extra_args="--colors --cr-wrap" format="$msg_last_chance_are_you_sure_color" fi local disk line_width for disk in $*; do if [ "$line" ]; then line_width=${#line} else line_width=$plen fi line_width=$(( $line_width + 1 + ${#disk} )) # Add newline before disk if it would exceed max_width if [ $line_width -gt $max_width ]; then list="$list$line\n" line="$prefix" height=$(( $height + 1 )) fi # Add the disk to the list line="$line $disk" done # Append the left-overs if [ "${line#$prefix}" ]; then list="$list$line" height=$(( $height + 1 )) fi # Add height for Xdialog(1) [ "$USE_XDIALOG" ] && height=$(( $height + $height / 5 + 3 )) prompt=$( printf "$format" "$list" ) f_dprintf "%s: Last Chance!" "$0" $DIALOG \ --title "$title" \ --backtitle "$btitle" \ --hline "$hline" \ --$defaultno \ --$yes-label "$msg_yes" \ --$no-label "$msg_no" \ $extra_args \ --yesno "$prompt" $height $width } # dialog_menu_layout # # Configure Virtual Device type and disks to use for the ZFS boot pool. User # must select enough disks to satisfy the chosen vdev type. # dialog_menu_layout() { local funcname=dialog_menu_layout local title="$DIALOG_TITLE" local btitle="$DIALOG_BACKTITLE" local vdev_prompt="$msg_select_virtual_device_type" local disk_prompt="$msg_please_select_one_or_more_disks" local vdev_menu_list=" 'stripe' '$msg_stripe_desc' '$msg_stripe_help' 'mirror' '$msg_mirror_desc' '$msg_mirror_help' 'raidz1' '$msg_raidz1_desc' '$msg_raidz1_help' 'raidz2' '$msg_raidz2_desc' '$msg_raidz2_help' 'raidz3' '$msg_raidz3_desc' '$msg_raidz3_help' " # END-QUOTE local disk_check_list= # Calculated below local vdev_hline="$hline_arrows_tab_enter" local disk_hline="$hline_arrows_space_tab_enter" # Warn the user if vdev type is not valid case "$ZFSBOOT_VDEV_TYPE" in stripe|mirror|raidz1|raidz2|raidz3) : known good ;; *) f_dprintf "%s: Invalid virtual device type \`%s'" \ $funcname "$ZFSBOOT_VDEV_TYPE" f_show_err "$msg_invalid_virtual_device_type" \ "$ZFSBOOT_VDEV_TYPE" f_interactive || return $FAILURE esac # Calculate size of vdev menu once only local vheight vwidth vrows eval f_dialog_menu_with_help_size vheight vwidth vrows \ \"\$title\" \"\$btitle\" \"\$vdev_prompt\" \"\$vdev_hline\" \ $vdev_menu_list # Get a list of probed disk devices local disks= debug= f_device_find "" $DEVICE_TYPE_DISK disks # Prune out mounted md(4) devices that may be part of the boot process local disk name new_list= for disk in $disks; do debug= $disk get name name case "$name" in md[0-9]*) f_mounted -b "/dev/$name" && continue ;; esac new_list="$new_list $disk" done disks="${new_list# }" # Debugging if [ "$debug" ]; then local disk_names= for disk in $disks; do debug= $disk get name name disk_names="$disk_names $name" done f_dprintf "$funcname: disks=[%s]" "${disk_names# }" fi if [ ! "$disks" ]; then f_dprintf "No disk(s) present to configure" f_show_err "$msg_no_disks_present_to_configure" return $FAILURE fi # Lets sort the disks array to be more user friendly f_device_sort_by name disks disks # # Operate in a loop so we can (if interactive) repeat if not enough # disks are selected to satisfy the chosen vdev type or user wants to # back-up to the previous menu. # local vardisk ndisks onoff selections vdev_choice breakout device local valid_disks all_valid want_disks desc height width rows while :; do # # Confirm the vdev type that was selected # if f_interactive && [ "$ZFSBOOT_CONFIRM_LAYOUT" ]; then vdev_choice=$( eval $DIALOG \ --title \"\$title\" \ --backtitle \"\$btitle\" \ --hline \"\$vdev_hline\" \ --ok-label \"\$msg_ok\" \ --cancel-label \"\$msg_cancel\" \ --item-help \ --default-item \"\$ZFSBOOT_VDEV_TYPE\" \ --menu \"\$vdev_prompt\" \ $vheight $vwidth $vrows \ $vdev_menu_list \ 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD ) || return $? # Exit if user pressed ESC or chose Cancel/No f_dialog_data_sanitize vdev_choice ZFSBOOT_VDEV_TYPE="$vdev_choice" f_dprintf "$funcname: ZFSBOOT_VDEV_TYPE=[%s]" \ "$ZFSBOOT_VDEV_TYPE" fi # Determine the number of disks needed for this vdev type want_disks=0 case "$ZFSBOOT_VDEV_TYPE" in stripe) want_disks=1 ;; mirror) want_disks=2 ;; raidz1) want_disks=3 ;; raidz2) want_disks=4 ;; raidz3) want_disks=5 ;; esac # # Warn the user if any scripted disks are invalid # valid_disks= all_valid=${ZFSBOOT_DISKS:+1} # optimism for disk in $ZFSBOOT_DISKS; do if debug= f_device_find -1 \ $disk $DEVICE_TYPE_DISK device then valid_disks="$valid_disks $disk" continue fi f_dprintf "$funcname: \`%s' is not a real disk" "$disk" all_valid= done if [ ! "$all_valid" ]; then if [ "$ZFSBOOT_DISKS" ]; then f_show_err \ "$msg_missing_one_or_more_scripted_disks" else f_dprintf "No disks selected." f_interactive || f_show_err "$msg_no_disks_selected" fi f_interactive || return $FAILURE fi ZFSBOOT_DISKS="${valid_disks# }" # # Short-circuit if we're running non-interactively # if ! f_interactive || [ ! "$ZFSBOOT_CONFIRM_LAYOUT" ]; then f_count ndisks $ZFSBOOT_DISKS [ $ndisks -ge $want_disks ] && break # to success # Not enough disks selected f_dprintf "$funcname: %s: %s (%u < %u minimum)" \ "$ZFSBOOT_VDEV_TYPE" \ "Not enough disks selected." \ $ndisks $want_disks f_interactive || return $FAILURE msg_yes="$msg_change_selection" msg_no="$msg_cancel" \ f_yesno "%s: $msg_not_enough_disks_selected" \ "$ZFSBOOT_VDEV_TYPE" $ndisks $want_disks || return $FAILURE fi # # Confirm the disks that were selected # Loop until the user cancels or selects enough disks # breakout= while :; do # Loop over list of available disks, resetting state for disk in $disks; do f_isset _${disk}_status && _${disk}_status= done # Loop over list of selected disks and create temporary # locals to map statuses onto up-to-date list of disks for disk in $ZFSBOOT_DISKS; do debug= f_device_find -1 \ $disk $DEVICE_TYPE_DISK disk f_isset _${disk}_status || local _${disk}_status _${disk}_status=on done # Create the checklist menu of discovered disk devices disk_check_list= for disk in $disks; do desc= $disk get name name $disk get desc desc f_shell_escape "$desc" desc f_getvar _${disk}_status:-off onoff disk_check_list="$disk_check_list $name '$desc' $onoff" done eval f_dialog_checklist_size height width rows \ \"\$title\" \"\$btitle\" \"\$prompt\" \ \"\$hline\" $disk_check_list selections=$( eval $DIALOG \ --title \"\$DIALOG_TITLE\" \ --backtitle \"\$DIALOG_BACKTITLE\" \ --separate-output \ --hline \"\$hline\" \ --ok-label \"\$msg_ok\" \ --cancel-label \"\$msg_back\" \ --checklist \"\$prompt\" \ $height $width $rows \ $disk_check_list \ 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD ) || break # Loop if user pressed ESC or chose Cancel/No f_dialog_data_sanitize selections ZFSBOOT_DISKS="$selections" f_dprintf "$funcname: ZFSBOOT_DISKS=[%s]" \ "$ZFSBOOT_DISKS" f_count ndisks $ZFSBOOT_DISKS [ $ndisks -ge $want_disks ] && breakout=break && break # Not enough disks selected f_dprintf "$funcname: %s: %s (%u < %u minimum)" \ "$ZFSBOOT_VDEV_TYPE" \ "Not enough disks selected." \ $ndisks $want_disks msg_yes="$msg_change_selection" msg_no="$msg_cancel" \ f_yesno "%s: $msg_not_enough_disks_selected" \ "$ZFSBOOT_VDEV_TYPE" $ndisks $want_disks || break done [ "$breakout" = "break" ] && break [ "$ZFSBOOT_CONFIRM_LAYOUT" ] || return $FAILURE done return $DIALOG_OK } # dialog_uefi_prompt # # Confirm that the user wants to continue with the installation on a BIOS # system when they have booted with UEFI # dialog_uefi_prompt() { local title="$DIALOG_TITLE" local btitle="$DIALOG_BACKTITLE" local prompt # Calculated below local hline="$hline_arrows_tab_enter" local height=8 width=50 prefix=" " local plen=${#prefix} list= line= local max_width=$(( $width - 3 - $plen )) local yes no defaultno extra_args format if [ "$USE_XDIALOG" ]; then yes=ok no=cancel defaultno=default-no extra_args="--wrap --left" format="$msg_uefi_not_supported" else yes=yes no=no defaultno=defaultno extra_args="--cr-wrap" format="$msg_uefi_not_supported" fi # Add height for Xdialog(1) [ "$USE_XDIALOG" ] && height=$(( $height + $height / 5 + 3 )) prompt=$( printf "$format" ) f_dprintf "%s: UEFI prompt" "$0" $DIALOG \ --title "$title" \ --backtitle "$btitle" \ --hline "$hline" \ --$yes-label "$msg_yes" \ --$no-label "$msg_no" \ $extra_args \ --yesno "$prompt" $height $width } # zfs_create_diskpart $disk $index # # For each block device to be used in the zpool, rather than just create the # zpool with the raw block devices (e.g., da0, da1, etc.) we create partitions # so we can have some real swap. This also provides wiggle room incase your # replacement drivers do not have the exact same sector counts. # # NOTE: $swapsize and $bootsize should be defined by the calling function. # NOTE: Sets $bootpart and $targetpart for the calling function. # zfs_create_diskpart() { local funcname=zfs_create_diskpart local disk="$1" index="$2" # Check arguments if [ ! "$disk" ]; then f_dprintf "$funcname: NULL disk argument" msg_error="$msg_error: $funcname" \ f_show_err "$msg_null_disk_argument" return $FAILURE fi if [ "${disk#*[$IFS]}" != "$disk" ]; then f_dprintf "$funcname: Invalid disk argument \`%s'" "$disk" msg_error="$msg_error: $funcname" \ f_show_err "$msg_invalid_disk_argument" "$disk" return $FAILURE fi if [ ! "$index" ]; then f_dprintf "$funcname: NULL index argument" msg_error="$msg_error: $funcname" \ f_show_err "$msg_null_index_argument" return $FAILURE fi if ! f_isinteger "$index"; then f_dprintf "$funcname: Invalid index argument \`%s'" "$index" msg_error="$msg_error: $funcname" \ f_show_err "$msg_invalid_index_argument" "$index" return $FAILURE fi f_dprintf "$funcname: disk=[%s] index=[%s]" "$disk" "$index" # Check for unknown partition scheme before proceeding further case "$ZFSBOOT_PARTITION_SCHEME" in ""|MBR|GPT) : known good ;; *) f_dprintf "$funcname: %s is an unsupported partition scheme" \ "$ZFSBOOT_PARTITION_SCHEME" msg_error="$msg_error: $funcname" f_show_err \ "$msg_unsupported_partition_scheme" \ "$ZFSBOOT_PARTITION_SCHEME" return $FAILURE esac # # Destroy whatever partition layout is currently on disk. # NOTE: `-F' required to destroy if partitions still exist. # NOTE: Failure is ok here, blank disk will have nothing to destroy. # f_dprintf "$funcname: Destroying all data/layouts on \`%s'..." "$disk" f_eval_catch -d $funcname gpart "$GPART_DESTROY_F" $disk f_eval_catch -d $funcname graid "$GRAID_DELETE" $disk f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" /dev/$disk # Make doubly-sure backup GPT is destroyed f_eval_catch -d $funcname gpart "$GPART_CREATE" gpt $disk f_eval_catch -d $funcname gpart "$GPART_DESTROY_F" $disk # # Enable boot pool if encryption is desired # [ "$ZFSBOOT_GELI_ENCRYPTION" ] && ZFSBOOT_BOOT_POOL=1 # # Lay down the desired type of partition scheme # local setsize mbrindex case "$ZFSBOOT_PARTITION_SCHEME" in ""|GPT) f_dprintf "$funcname: Creating GPT layout..." # # 1. Create GPT layout using labels # f_eval_catch $funcname gpart "$GPART_CREATE" gpt $disk || return $FAILURE # # 2. Add small freebsd-boot partition labeled `boot#' # f_eval_catch $funcname gpart "$GPART_ADD_LABEL_WITH_SIZE" \ gptboot$index freebsd-boot 512k $disk || return $FAILURE f_eval_catch $funcname gpart "$GPART_BOOTCODE_PART" \ /boot/pmbr /boot/gptzfsboot 1 $disk || return $FAILURE # NB: zpool will use the `zfs#' GPT labels bootpart=p2 swappart=p2 targetpart=p2 [ ${swapsize:-0} -gt 0 ] && targetpart=p3 # # Prepare boot pool if enabled (e.g., for geli(8)) # if [ "$ZFSBOOT_BOOT_POOL" ]; then bootpart=p2 swappart=p3 targetpart=p3 [ ${swapsize:-0} -gt 0 ] && targetpart=p4 f_eval_catch $funcname gpart \ "$GPART_ADD_LABEL_WITH_SIZE" boot$index \ freebsd-zfs ${bootsize}b $disk || return $FAILURE # Pedantically nuke any old labels f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ /dev/$disk$bootpart if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then # Pedantically detach targetpart for later f_eval_catch -d $funcname geli \ "$GELI_DETACH_F" \ /dev/$disk$targetpart fi fi # # 3. Add freebsd-swap partition labeled `swap#' # if [ ${swapsize:-0} -gt 0 ]; then f_eval_catch $funcname gpart \ "$GPART_ADD_LABEL_WITH_SIZE" swap$index \ freebsd-swap ${swapsize}b $disk || return $FAILURE # Pedantically nuke any old labels on the swap f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ /dev/$disk$swappart fi # # 4. Add freebsd-zfs partition labeled `zfs#' for zroot # f_eval_catch $funcname gpart "$GPART_ADD_LABEL" \ zfs$index freebsd-zfs $disk || return $FAILURE f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ /dev/$disk$targetpart ;; MBR) f_dprintf "$funcname: Creating MBR layout..." # # 1. Create MBR layout (no labels) # f_eval_catch $funcname gpart "$GPART_CREATE" mbr $disk || return $FAILURE f_eval_catch $funcname gpart "$GPART_BOOTCODE" /boot/mbr \ $disk || return $FAILURE # # 2. Add freebsd slice with all available space # f_eval_catch $funcname gpart "$GPART_ADD" freebsd $disk || return $FAILURE f_eval_catch $funcname gpart "$GPART_SET_ACTIVE" 1 $disk || return $FAILURE # Pedantically nuke any old labels f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ /dev/${disk}s1 # Pedantically nuke any old scheme f_eval_catch -d $funcname gpart "$GPART_DESTROY_F" ${disk}s1 # # 3. Write BSD scheme to the freebsd slice # f_eval_catch $funcname gpart "$GPART_CREATE" BSD ${disk}s1 || return $FAILURE # NB: zpool will use s1a (no labels) bootpart=s1a swappart=s1b targetpart=s1d mbrindex=4 # # Always prepare a boot pool on MBR # ZFSBOOT_BOOT_POOL=1 f_eval_catch $funcname gpart \ "$GPART_ADD_INDEX_WITH_SIZE" \ 1 freebsd-zfs ${bootsize}b ${disk}s1 || return $FAILURE # Pedantically nuke any old labels f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ /dev/$disk$bootpart if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then # Pedantically detach targetpart for later f_eval_catch -d $funcname geli \ "$GELI_DETACH_F" \ /dev/$disk$targetpart fi # # 4. Add freebsd-swap partition # if [ ${swapsize:-0} -gt 0 ]; then f_eval_catch $funcname gpart \ "$GPART_ADD_INDEX_WITH_SIZE" 2 \ freebsd-swap ${swapsize}b ${disk}s1 || return $FAILURE # Pedantically nuke any old labels on the swap f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ /dev/${disk}s1b fi # # 5. Add freebsd-zfs partition for zroot # f_eval_catch $funcname gpart "$GPART_ADD_INDEX" \ $mbrindex freebsd-zfs ${disk}s1 || return $FAILURE f_eval_catch -d $funcname zpool "$ZPOOL_LABELCLEAR_F" \ /dev/$disk$targetpart # Pedantic f_eval_catch $funcname dd "$DD_WITH_OPTIONS" \ /boot/zfsboot /dev/${disk}s1 count=1 || return $FAILURE ;; esac # $ZFSBOOT_PARTITION_SCHEME # Update fstab(5) + local swapsize + f_expand_number "$ZFSBOOT_SWAP_SIZE" swapsize if [ "$isswapmirror" ]; then # This is not the first disk in the mirror, do nothing elif [ "$ZFSBOOT_SWAP_ENCRYPTION" -a "$ZFSBOOT_SWAP_MIRROR" ]; then f_eval_catch $funcname printf "$PRINTF_FSTAB" \ /dev/mirror/swap.eli none swap sw 0 0 \ $BSDINSTALL_TMPETC/fstab || return $FAILURE isswapmirror=1 elif [ "$ZFSBOOT_SWAP_MIRROR" ]; then f_eval_catch $funcname printf "$PRINTF_FSTAB" \ /dev/mirror/swap none swap sw 0 0 \ $BSDINSTALL_TMPETC/fstab || return $FAILURE isswapmirror=1 elif [ "$ZFSBOOT_SWAP_ENCRYPTION" ]; then f_eval_catch $funcname printf "$PRINTF_FSTAB" \ /dev/$disk${swappart}.eli none swap sw 0 0 \ $BSDINSTALL_TMPETC/fstab || return $FAILURE + elif [ ${swapsize:-0} -eq 0 ] + # If swap is 0 sized, don't add it to fstab else f_eval_catch $funcname printf "$PRINTF_FSTAB" \ /dev/$disk$swappart none swap sw 0 0 \ $BSDINSTALL_TMPETC/fstab || return $FAILURE fi return $SUCCESS } # zfs_create_boot $poolname $vdev_type $disks ... # # Creates boot pool and dataset layout. Returns error if something goes wrong. # Errors are printed to stderr for collection and display. # zfs_create_boot() { local funcname=zfs_create_boot local zroot_name="$1" local zroot_vdevtype="$2" local zroot_vdevs= # Calculated below local swap_devs= # Calculated below local boot_vdevs= # Used for geli(8) and/or MBR layouts shift 2 # poolname vdev_type local disks="$*" disk local isswapmirror local bootpart targetpart swappart # Set by zfs_create_diskpart() below local create_options # # Pedantic checks; should never be seen # if [ ! "$zroot_name" ]; then f_dprintf "$funcname: NULL poolname" msg_error="$msg_error: $funcname" \ f_show_err "$msg_null_poolname" return $FAILURE fi if [ $# -lt 1 ]; then f_dprintf "$funcname: missing disk arguments" msg_error="$msg_error: $funcname" \ f_show_err "$msg_missing_disk_arguments" return $FAILURE fi f_dprintf "$funcname: poolname=[%s] vdev_type=[%s]" \ "$zroot_name" "$zroot_vdevtype" # # Initialize fstab(5) # f_dprintf "$funcname: Initializing temporary fstab(5) file..." f_eval_catch $funcname sh "$SHELL_TRUNCATE" $BSDINSTALL_TMPETC/fstab || return $FAILURE f_eval_catch $funcname printf "$PRINTF_FSTAB" \ "# Device" Mountpoint FStype Options Dump "Pass#" \ $BSDINSTALL_TMPETC/fstab || return $FAILURE # # Expand SI units in desired sizes # f_dprintf "$funcname: Expanding supplied size values..." local swapsize bootsize if ! f_expand_number "$ZFSBOOT_SWAP_SIZE" swapsize; then f_dprintf "$funcname: Invalid swap size \`%s'" \ "$ZFSBOOT_SWAP_SIZE" f_show_err "$msg_invalid_swap_size" "$ZFSBOOT_SWAP_SIZE" return $FAILURE fi if ! f_expand_number "$ZFSBOOT_BOOT_POOL_SIZE" bootsize; then f_dprintf "$funcname: Invalid boot pool size \`%s'" \ "$ZFSBOOT_BOOT_POOL_SIZE" f_show_err "$msg_invalid_boot_pool_size" \ "$ZFSBOOT_BOOT_POOL_SIZE" return $FAILURE fi f_dprintf "$funcname: ZFSBOOT_SWAP_SIZE=[%s] swapsize=[%s]" \ "$ZFSBOOT_SWAP_SIZE" "$swapsize" f_dprintf "$funcname: ZFSBOOT_BOOT_POOL_SIZE=[%s] bootsize=[%s]" \ "$ZFSBOOT_BOOT_POOL_SIZE" "$bootsize" # # Destroy the pool in-case this is our second time 'round (case of # failure and installer presented ``Retry'' option to come back). # # NB: If we don't destroy the pool, later gpart(8) destroy commands # that try to clear existing partitions (see zfs_create_diskpart()) # will fail with a `Device Busy' error, leading to `GEOM exists'. # f_eval_catch -d $funcname zpool "$ZPOOL_DESTROY" "$zroot_name" # # Prepare the disks and build pool device list(s) # f_dprintf "$funcname: Preparing disk partitions for ZFS pool..." # Force 4K sectors using vfs.zfs.min_auto_ashift=12 if [ "$ZFSBOOT_FORCE_4K_SECTORS" ]; then f_dprintf "$funcname: With 4K sectors..." f_eval_catch $funcname sysctl "$SYSCTL_ZFS_MIN_ASHIFT_12" \ || return $FAILURE fi local n=0 for disk in $disks; do zfs_create_diskpart $disk $n || return $FAILURE # Now $bootpart, $targetpart, and $swappart are set (suffix # for $disk) if [ "$ZFSBOOT_BOOT_POOL" ]; then boot_vdevs="$boot_vdevs $disk$bootpart" fi zroot_vdevs="$zroot_vdevs $disk$targetpart" if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then zroot_vdevs="$zroot_vdevs.eli" fi n=$(( $n + 1 )) done # disks # # If we need/want a boot pool, create it # if [ "$ZFSBOOT_BOOT_POOL" ]; then local bootpool_vdevtype= # Calculated below local bootpool_options= # Calculated below local bootpool_name="$ZFSBOOT_BOOT_POOL_NAME" local bootpool="$BSDINSTALL_CHROOT/$bootpool_name" local zroot_key="${ZFSBOOT_GELI_KEY_FILE#/}" f_dprintf "$funcname: Setting up boot pool..." [ "$ZFSBOOT_GELI_ENCRYPTION" ] && f_dprintf "$funcname: For encrypted root disk..." # Create parent directory for boot pool f_eval_catch -d $funcname umount "$UMOUNT" /mnt f_eval_catch $funcname mount "$MOUNT_TYPE" tmpfs none \ $BSDINSTALL_CHROOT || return $FAILURE # Create mirror across the boot partition on all disks local nvdevs f_count nvdevs $boot_vdevs [ $nvdevs -gt 1 ] && bootpool_vdevtype=mirror create_options="$ZFSBOOT_BOOT_POOL_CREATE_OPTIONS" bootpool_options="-o altroot=$BSDINSTALL_CHROOT" bootpool_options="$bootpool_options $create_options" bootpool_options="$bootpool_options -m \"/$bootpool_name\" -f" f_eval_catch $funcname zpool "$ZPOOL_CREATE_WITH_OPTIONS" \ "$bootpool_options" "$bootpool_name" \ "$bootpool_vdevtype" "$boot_vdevs" || return $FAILURE f_eval_catch $funcname mkdir "$MKDIR_P" "$bootpool/boot" || return $FAILURE if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then # Generate an encryption key using random(4) f_eval_catch $funcname dd "$DD_WITH_OPTIONS" \ /dev/random "$bootpool/$zroot_key" \ "bs=4096 count=1" || return $FAILURE f_eval_catch $funcname chmod "$CHMOD_MODE" \ go-wrx "$bootpool/$zroot_key" || return $FAILURE else # Clean up f_eval_catch $funcname zfs "$ZFS_UNMOUNT" \ "$bootpool_name" || return $FAILURE f_eval_catch -d $funcname umount "$UMOUNT" /mnt # tmpfs fi fi # # Create the geli(8) GEOMS # if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then # Prompt user for password (twice) if ! msg_enter_new_password="$msg_geli_password" \ f_dialog_input_password then f_dprintf "$funcname: User cancelled" f_show_err "$msg_user_cancelled" return $FAILURE fi # Initialize geli(8) on each of the target partitions for disk in $disks; do f_dialog_info "$msg_geli_setup" \ 2>&1 >&$DIALOG_TERMINAL_PASSTHRU_FD if ! echo "$pw_password" | f_eval_catch \ $funcname geli "$GELI_PASSWORD_INIT" \ "$bootpool/boot/$disk$targetpart.eli" \ AES-XTS "$bootpool/$zroot_key" \ $disk$targetpart then f_interactive || f_die unset pw_password # Sensitive info return $FAILURE fi if ! echo "$pw_password" | f_eval_catch \ $funcname geli "$GELI_ATTACH" \ "$bootpool/$zroot_key" $disk$targetpart then f_interactive || f_die unset pw_password # Sensitive info return $FAILURE fi done unset pw_password # Sensitive info # Clean up f_eval_catch $funcname zfs "$ZFS_UNMOUNT" "$bootpool_name" || return $FAILURE f_eval_catch -d $funcname umount "$UMOUNT" /mnt # tmpfs fi # # Create the gmirror(8) GEOMS for swap # if [ "$ZFSBOOT_SWAP_MIRROR" ]; then for disk in $disks; do swap_devs="$swap_devs $disk$swappart" done f_eval_catch $funcname gmirror "$SWAP_GMIRROR_LABEL" \ "$swap_devs" || return $FAILURE fi # # Create the ZFS root pool with desired type and disk devices # f_dprintf "$funcname: Creating root pool..." create_options="$ZFSBOOT_POOL_CREATE_OPTIONS" f_eval_catch $funcname zpool "$ZPOOL_CREATE_WITH_OPTIONS" \ "-o altroot=$BSDINSTALL_CHROOT $create_options -m none -f" \ "$zroot_name" "$zroot_vdevtype" "$zroot_vdevs" || return $FAILURE # # Create ZFS dataset layout within the new root pool # f_dprintf "$funcname: Creating ZFS datasets..." echo "$ZFSBOOT_DATASETS" | while read dataset options; do # Skip blank lines and comments case "$dataset" in "#"*|"") continue; esac # Remove potential inline comments in options options="${options%%#*}" # Replace tabs with spaces f_replaceall "$options" " " " " options # Reduce contiguous runs of space to one single space oldoptions= while [ "$oldoptions" != "$options" ]; do oldoptions="$options" f_replaceall "$options" " " " " options done # Replace both commas and spaces with ` -o ' f_replaceall "$options" "[ ,]" " -o " options # Create the dataset with desired options f_eval_catch $funcname zfs "$ZFS_CREATE_WITH_OPTIONS" \ "${options:+-o $options}" "$zroot_name$dataset" || return $FAILURE done # Touch up permissions on the tmp directories f_dprintf "$funcname: Modifying directory permissions..." local dir for dir in /tmp /var/tmp; do f_eval_catch $funcname chmod "$CHMOD_MODE" 1777 \ $BSDINSTALL_CHROOTDIR$dir || return $FAILURE done # Create symlink(s) if [ "$ZFSBOOT_BOOT_POOL" ]; then f_dprintf "$funcname: Creating /boot symlink for boot pool..." f_eval_catch $funcname ln "$LN_SF" "$bootpool_name/boot" \ $BSDINSTALL_CHROOT/boot || return $FAILURE fi # Set bootfs property local zroot_bootfs="$ZFSBOOT_BEROOT_NAME/$ZFSBOOT_BOOTFS_NAME" f_dprintf "$funcname: Setting bootfs property..." f_eval_catch $funcname zpool "$ZPOOL_SET" \ "bootfs=\"$zroot_name/$zroot_bootfs\"" "$zroot_name" || return $FAILURE # Export the pool(s) f_dprintf "$funcname: Temporarily exporting ZFS pool(s)..." f_eval_catch $funcname zpool "$ZPOOL_EXPORT" "$zroot_name" || return $FAILURE if [ "$ZFSBOOT_BOOT_POOL" ]; then f_eval_catch $funcname zpool "$ZPOOL_EXPORT" \ "$bootpool_name" || return $FAILURE fi # MBR boot loader touch-up if [ "$ZFSBOOT_PARTITION_SCHEME" = "MBR" ]; then f_dprintf "$funcname: Updating MBR boot loader on disks..." # Stick the ZFS boot loader in the "convienient hole" after # the ZFS internal metadata for disk in $disks; do f_eval_catch $funcname dd "$DD_WITH_OPTIONS" \ /boot/zfsboot /dev/$disk$bootpart \ "skip=1 seek=1024" || return $FAILURE done fi # Re-import the ZFS pool(s) f_dprintf "$funcname: Re-importing ZFS pool(s)..." f_eval_catch $funcname zpool "$ZPOOL_IMPORT_WITH_OPTIONS" \ "-o altroot=\"$BSDINSTALL_CHROOT\"" "$zroot_name" || return $FAILURE if [ "$ZFSBOOT_BOOT_POOL" ]; then f_eval_catch $funcname zpool "$ZPOOL_IMPORT_WITH_OPTIONS" \ "-o altroot=\"$BSDINSTALL_CHROOT\"" \ "$bootpool_name" || return $FAILURE fi # While this is apparently not needed, it seems to help MBR f_dprintf "$funcname: Configuring zpool.cache for zroot..." f_eval_catch $funcname mkdir "$MKDIR_P" $BSDINSTALL_CHROOT/boot/zfs || return $FAILURE f_eval_catch $funcname zpool "$ZPOOL_SET" \ "cachefile=\"$BSDINSTALL_CHROOT/boot/zfs/zpool.cache\"" \ "$zroot_name" || return $FAILURE # Last, but not least... required lines for rc.conf(5)/loader.conf(5) # NOTE: We later concatenate these into their destination f_dprintf "%s: Configuring rc.conf(5)/loader.conf(5) additions..." \ "$funcname" f_eval_catch $funcname echo "$ECHO_APPEND" 'zfs_enable=\"YES\"' \ $BSDINSTALL_TMPETC/rc.conf.zfs || return $FAILURE f_eval_catch $funcname echo "$ECHO_APPEND" \ 'kern.geom.label.disk_ident.enable=\"0\"' \ $BSDINSTALL_TMPBOOT/loader.conf.zfs || return $FAILURE f_eval_catch $funcname echo "$ECHO_APPEND" \ 'kern.geom.label.gptid.enable=\"0\"' \ $BSDINSTALL_TMPBOOT/loader.conf.zfs || return $FAILURE if [ "$ZFSBOOT_SWAP_MIRROR" ]; then f_eval_catch $funcname echo "$ECHO_APPEND" \ 'geom_mirror_load=\"YES\"' \ $BSDINSTALL_TMPBOOT/loader.conf.gmirror || return $FAILURE fi # We're all done unless we should go on for boot pool [ "$ZFSBOOT_BOOT_POOL" ] || return $SUCCESS # Set cachefile for boot pool so it auto-imports at system start f_dprintf "$funcname: Configuring zpool.cache for boot pool..." f_eval_catch $funcname zpool "$ZPOOL_SET" \ "cachefile=\"$BSDINSTALL_CHROOT/boot/zfs/zpool.cache\"" \ "$bootpool_name" || return $FAILURE # Some additional geli(8) requirements for loader.conf(5) for option in \ 'zpool_cache_load=\"YES\"' \ 'zpool_cache_type=\"/boot/zfs/zpool.cache\"' \ 'zpool_cache_name=\"/boot/zfs/zpool.cache\"' \ ; do f_eval_catch $funcname echo "$ECHO_APPEND" "$option" \ $BSDINSTALL_TMPBOOT/loader.conf.zfs || return $FAILURE done f_eval_catch $funcname printf "$PRINTF_CONF" vfs.root.mountfrom \ "\"zfs:$zroot_name/$zroot_bootfs\"" \ $BSDINSTALL_TMPBOOT/loader.conf.root || return $FAILURE # We're all done unless we should go on to do encryption [ "$ZFSBOOT_GELI_ENCRYPTION" ] || return $SUCCESS # # Configure geli(8)-based encryption # f_dprintf "$funcname: Configuring disk encryption..." f_eval_catch $funcname echo "$ECHO_APPEND" 'aesni_load=\"YES\"' \ $BSDINSTALL_TMPBOOT/loader.conf.aesni || return $FAILURE f_eval_catch $funcname echo "$ECHO_APPEND" 'geom_eli_load=\"YES\"' \ $BSDINSTALL_TMPBOOT/loader.conf.geli || return $FAILURE f_eval_catch $funcname echo "$ECHO_APPEND" \ 'geom_eli_passphrase_prompt=\"YES\"' \ $BSDINSTALL_TMPBOOT/loader.conf.geli || return $FAILURE for disk in $disks; do f_eval_catch $funcname printf "$PRINTF_CONF" \ geli_%s_keyfile0_load "$disk$targetpart YES" \ $BSDINSTALL_TMPBOOT/loader.conf.$disk$targetpart || return $FAILURE f_eval_catch $funcname printf "$PRINTF_CONF" \ geli_%s_keyfile0_type \ "$disk$targetpart $disk$targetpart:geli_keyfile0" \ $BSDINSTALL_TMPBOOT/loader.conf.$disk$targetpart || return $FAILURE f_eval_catch $funcname printf "$PRINTF_CONF" \ geli_%s_keyfile0_name \ "$disk$targetpart \"$ZFSBOOT_GELI_KEY_FILE\"" \ $BSDINSTALL_TMPBOOT/loader.conf.$disk$targetpart || return $FAILURE done return $SUCCESS } # dialog_menu_diskinfo # # Prompt the user to select a disk and then provide detailed info on it. # dialog_menu_diskinfo() { local device disk # # Break from loop when user cancels disk selection # while :; do device=$( msg_cancel="$msg_back" f_device_menu \ "$DIALOG_TITLE" "$msg_select_a_disk_device" "" \ $DEVICE_TYPE_DISK 2>&1 ) || break $device get name disk # Show gpart(8) `show' and camcontrol(8) `inquiry' data f_show_msg "$msg_detailed_disk_info" \ "$disk" "$( gpart show $disk 2> /dev/null )" \ "$disk" "$( camcontrol inquiry $disk 2> /dev/null )" \ "$disk" "$( camcontrol identify $disk 2> /dev/null )" done return $SUCCESS } ############################################################ MAIN # # Initialize # f_dialog_title "$msg_zfs_configuration" f_dialog_backtitle "$msg_freebsd_installer" # User may have specifically requested ZFS-related operations be interactive ! f_interactive && f_zfsinteractive && unset $VAR_NONINTERACTIVE # # Debugging # f_dprintf "BSDINSTALL_CHROOT=[%s]" "$BSDINSTALL_CHROOT" f_dprintf "BSDINSTALL_TMPETC=[%s]" "$BSDINSTALL_TMPETC" f_dprintf "FSTAB_FMT=[%s]" "$FSTAB_FMT" # # If the system was booted with UEFI, warn the user that FreeBSD can't do # ZFS with UEFI yet # if f_interactive; then bootmethod=$( sysctl -n machdep.bootmethod ) f_dprintf "machdep.bootmethod=[%s]" "$bootmethod" if [ "$bootmethod" != "BIOS" ]; then dialog_uefi_prompt retval=$? f_dprintf "uefi_prompt=[%s]" "$retval" [ $retval -eq $DIALOG_OK ] || f_die fi fi # # Loop over the main menu until we've accomplished what we came here to do # while :; do if ! f_interactive; then retval=$DIALOG_OK mtag=">>> $msg_install" else dialog_menu_main retval=$? f_dialog_menutag_fetch mtag fi f_dprintf "retval=%u mtag=[%s]" $retval "$mtag" [ $retval -eq $DIALOG_OK ] || f_die case "$mtag" in ">>> $msg_install") # # First, validate the user's selections # # Make sure they gave us a name for the pool if [ ! "$ZFSBOOT_POOL_NAME" ]; then f_dprintf "Pool name cannot be empty." f_show_err "$msg_pool_name_cannot_be_empty" continue fi # Validate vdev type against number of disks selected/scripted # (also validates that ZFSBOOT_DISKS are real [probed] disks) # NB: dialog_menu_layout supports running non-interactively dialog_menu_layout || continue # Make sure each disk will be at least 50% ZFS if f_expand_number "$ZFSBOOT_SWAP_SIZE" swapsize && f_expand_number "$ZFSBOOT_BOOT_POOL_SIZE" bootsize then minsize=$swapsize teeny_disks= [ "$ZFSBOOT_BOOT_POOL" ] && minsize=$(( $minsize + $bootsize )) for disk in $ZFSBOOT_DISKS; do debug= f_device_find -1 \ $disk $DEVICE_TYPE_DISK device $device get capacity disksize || continue [ ${disksize:-0} -ge 0 ] || disksize=0 disksize=$(( $disksize - $minsize )) [ $disksize -lt $minsize ] && teeny_disks="$teeny_disks $disk" done if [ "$teeny_disks" ]; then f_dprintf "swapsize=[%s] bootsize[%s] %s" \ "$ZFSBOOT_SWAP_SIZE" \ "$ZFSBOOT_BOOT_POOL_SIZE" \ "minsize=[$minsize]" f_dprintf "These disks are too small: %s" \ "$teeny_disks" f_show_err "$msg_these_disks_are_too_small" \ "$ZFSBOOT_SWAP_SIZE" \ "$ZFSBOOT_BOOT_POOL_SIZE" \ "$teeny_disks" continue fi fi # # Last Chance! # if f_interactive; then dialog_last_chance $ZFSBOOT_DISKS || continue fi # # Let's do this # vdev_type="$ZFSBOOT_VDEV_TYPE" # Blank the vdev type for the default layout [ "$vdev_type" = "stripe" ] && vdev_type= zfs_create_boot "$ZFSBOOT_POOL_NAME" \ "$vdev_type" $ZFSBOOT_DISKS || continue break # to success ;; ?" $msg_pool_type_disks") ZFSBOOT_CONFIRM_LAYOUT=1 dialog_menu_layout # User has poked settings, disable later confirmation ZFSBOOT_CONFIRM_LAYOUT= ;; "- $msg_rescan_devices") f_device_rescan ;; "- $msg_disk_info") dialog_menu_diskinfo ;; ?" $msg_pool_name") # Prompt the user to input/change the name for the new pool f_dialog_input input \ "$msg_please_enter_a_name_for_your_zpool" \ "$ZFSBOOT_POOL_NAME" && ZFSBOOT_POOL_NAME="$input" ;; ?" $msg_force_4k_sectors") # Toggle the variable referenced both by the menu and later if [ "$ZFSBOOT_FORCE_4K_SECTORS" ]; then ZFSBOOT_FORCE_4K_SECTORS= else ZFSBOOT_FORCE_4K_SECTORS=1 fi ;; ?" $msg_encrypt_disks") # Toggle the variable referenced both by the menu and later if [ "$ZFSBOOT_GELI_ENCRYPTION" ]; then ZFSBOOT_GELI_ENCRYPTION= else ZFSBOOT_FORCE_4K_SECTORS=1 ZFSBOOT_GELI_ENCRYPTION=1 fi ;; ?" $msg_partition_scheme") # Toggle between GPT and MBR if [ "$ZFSBOOT_PARTITION_SCHEME" = GPT ]; then ZFSBOOT_PARTITION_SCHEME=MBR else ZFSBOOT_PARTITION_SCHEME=GPT fi ;; ?" $msg_swap_size") # Prompt the user to input/change the swap size for each disk while :; do f_dialog_input input \ "$msg_please_enter_amount_of_swap_space" \ "$ZFSBOOT_SWAP_SIZE" && ZFSBOOT_SWAP_SIZE="${input:-0}" if f_expand_number "$ZFSBOOT_SWAP_SIZE" swapsize then if [ $swapsize -ne 0 -a $swapsize -lt 104857600 ]; then f_show_err "$msg_swap_toosmall" \ "$ZFSBOOT_SWAP_SIZE" continue; else break; fi else f_show_err "$msg_swap_invalid" \ "$ZFSBOOT_SWAP_SIZE" continue; fi done ;; ?" $msg_swap_mirror") # Toggle the variable referenced both by the menu and later if [ "$ZFSBOOT_SWAP_MIRROR" ]; then ZFSBOOT_SWAP_MIRROR= else ZFSBOOT_SWAP_MIRROR=1 fi ;; ?" $msg_swap_encrypt") # Toggle the variable referenced both by the menu and later if [ "$ZFSBOOT_SWAP_ENCRYPTION" ]; then ZFSBOOT_SWAP_ENCRYPTION= else ZFSBOOT_SWAP_ENCRYPTION=1 fi ;; esac done return $SUCCESS ################################################################################ # END ################################################################################