Index: head/sys/net80211/ieee80211.h =================================================================== --- head/sys/net80211/ieee80211.h (revision 282819) +++ head/sys/net80211/ieee80211.h (revision 282820) @@ -1,1118 +1,1123 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_H_ #define _NET80211_IEEE80211_H_ /* * 802.11 protocol definitions. */ #define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */ /* is 802.11 address multicast/broadcast? */ #define IEEE80211_IS_MULTICAST(_a) (*(_a) & 0x01) typedef uint16_t ieee80211_seq; /* IEEE 802.11 PLCP header */ struct ieee80211_plcp_hdr { uint16_t i_sfd; uint8_t i_signal; uint8_t i_service; uint16_t i_length; uint16_t i_crc; } __packed; #define IEEE80211_PLCP_SFD 0xF3A0 #define IEEE80211_PLCP_SERVICE 0x00 #define IEEE80211_PLCP_SERVICE_LOCKED 0x04 #define IEEE80211_PLCL_SERVICE_PBCC 0x08 #define IEEE80211_PLCP_SERVICE_LENEXT5 0x20 #define IEEE80211_PLCP_SERVICE_LENEXT6 0x40 #define IEEE80211_PLCP_SERVICE_LENEXT7 0x80 /* * generic definitions for IEEE 802.11 frames */ struct ieee80211_frame { uint8_t i_fc[2]; uint8_t i_dur[2]; uint8_t i_addr1[IEEE80211_ADDR_LEN]; uint8_t i_addr2[IEEE80211_ADDR_LEN]; uint8_t i_addr3[IEEE80211_ADDR_LEN]; uint8_t i_seq[2]; /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */ /* see below */ } __packed; struct ieee80211_qosframe { uint8_t i_fc[2]; uint8_t i_dur[2]; uint8_t i_addr1[IEEE80211_ADDR_LEN]; uint8_t i_addr2[IEEE80211_ADDR_LEN]; uint8_t i_addr3[IEEE80211_ADDR_LEN]; uint8_t i_seq[2]; uint8_t i_qos[2]; /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */ /* see below */ } __packed; struct ieee80211_qoscntl { uint8_t i_qos[2]; }; struct ieee80211_frame_addr4 { uint8_t i_fc[2]; uint8_t i_dur[2]; uint8_t i_addr1[IEEE80211_ADDR_LEN]; uint8_t i_addr2[IEEE80211_ADDR_LEN]; uint8_t i_addr3[IEEE80211_ADDR_LEN]; uint8_t i_seq[2]; uint8_t i_addr4[IEEE80211_ADDR_LEN]; } __packed; struct ieee80211_qosframe_addr4 { uint8_t i_fc[2]; uint8_t i_dur[2]; uint8_t i_addr1[IEEE80211_ADDR_LEN]; uint8_t i_addr2[IEEE80211_ADDR_LEN]; uint8_t i_addr3[IEEE80211_ADDR_LEN]; uint8_t i_seq[2]; uint8_t i_addr4[IEEE80211_ADDR_LEN]; uint8_t i_qos[2]; } __packed; #define IEEE80211_FC0_VERSION_MASK 0x03 #define IEEE80211_FC0_VERSION_SHIFT 0 #define IEEE80211_FC0_VERSION_0 0x00 #define IEEE80211_FC0_TYPE_MASK 0x0c #define IEEE80211_FC0_TYPE_SHIFT 2 #define IEEE80211_FC0_TYPE_MGT 0x00 #define IEEE80211_FC0_TYPE_CTL 0x04 #define IEEE80211_FC0_TYPE_DATA 0x08 #define IEEE80211_FC0_SUBTYPE_MASK 0xf0 #define IEEE80211_FC0_SUBTYPE_SHIFT 4 /* for TYPE_MGT */ #define IEEE80211_FC0_SUBTYPE_ASSOC_REQ 0x00 #define IEEE80211_FC0_SUBTYPE_ASSOC_RESP 0x10 #define IEEE80211_FC0_SUBTYPE_REASSOC_REQ 0x20 #define IEEE80211_FC0_SUBTYPE_REASSOC_RESP 0x30 #define IEEE80211_FC0_SUBTYPE_PROBE_REQ 0x40 #define IEEE80211_FC0_SUBTYPE_PROBE_RESP 0x50 #define IEEE80211_FC0_SUBTYPE_BEACON 0x80 #define IEEE80211_FC0_SUBTYPE_ATIM 0x90 #define IEEE80211_FC0_SUBTYPE_DISASSOC 0xa0 #define IEEE80211_FC0_SUBTYPE_AUTH 0xb0 #define IEEE80211_FC0_SUBTYPE_DEAUTH 0xc0 #define IEEE80211_FC0_SUBTYPE_ACTION 0xd0 #define IEEE80211_FC0_SUBTYPE_ACTION_NOACK 0xe0 /* for TYPE_CTL */ #define IEEE80211_FC0_SUBTYPE_BAR 0x80 #define IEEE80211_FC0_SUBTYPE_BA 0x90 #define IEEE80211_FC0_SUBTYPE_PS_POLL 0xa0 #define IEEE80211_FC0_SUBTYPE_RTS 0xb0 #define IEEE80211_FC0_SUBTYPE_CTS 0xc0 #define IEEE80211_FC0_SUBTYPE_ACK 0xd0 #define IEEE80211_FC0_SUBTYPE_CF_END 0xe0 #define IEEE80211_FC0_SUBTYPE_CF_END_ACK 0xf0 /* for TYPE_DATA (bit combination) */ #define IEEE80211_FC0_SUBTYPE_DATA 0x00 #define IEEE80211_FC0_SUBTYPE_CF_ACK 0x10 #define IEEE80211_FC0_SUBTYPE_CF_POLL 0x20 #define IEEE80211_FC0_SUBTYPE_CF_ACPL 0x30 #define IEEE80211_FC0_SUBTYPE_NODATA 0x40 #define IEEE80211_FC0_SUBTYPE_CFACK 0x50 #define IEEE80211_FC0_SUBTYPE_CFPOLL 0x60 #define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70 #define IEEE80211_FC0_SUBTYPE_QOS 0x80 #define IEEE80211_FC0_SUBTYPE_QOS_NULL 0xc0 #define IEEE80211_FC1_DIR_MASK 0x03 #define IEEE80211_FC1_DIR_NODS 0x00 /* STA->STA */ #define IEEE80211_FC1_DIR_TODS 0x01 /* STA->AP */ #define IEEE80211_FC1_DIR_FROMDS 0x02 /* AP ->STA */ #define IEEE80211_FC1_DIR_DSTODS 0x03 /* AP ->AP */ #define IEEE80211_IS_DSTODS(wh) \ (((wh)->i_fc[1] & IEEE80211_FC1_DIR_MASK) == IEEE80211_FC1_DIR_DSTODS) #define IEEE80211_FC1_MORE_FRAG 0x04 #define IEEE80211_FC1_RETRY 0x08 #define IEEE80211_FC1_PWR_MGT 0x10 #define IEEE80211_FC1_MORE_DATA 0x20 #define IEEE80211_FC1_PROTECTED 0x40 #define IEEE80211_FC1_ORDER 0x80 +#define IEEE80211_HAS_SEQ(type, subtype) \ + ((type) != IEEE80211_FC0_TYPE_CTL && \ + !((type) == IEEE80211_FC0_TYPE_DATA && \ + ((subtype) & IEEE80211_FC0_SUBTYPE_QOS_NULL) == \ + IEEE80211_FC0_SUBTYPE_QOS_NULL)) #define IEEE80211_SEQ_FRAG_MASK 0x000f #define IEEE80211_SEQ_FRAG_SHIFT 0 #define IEEE80211_SEQ_SEQ_MASK 0xfff0 #define IEEE80211_SEQ_SEQ_SHIFT 4 #define IEEE80211_SEQ_RANGE 4096 #define IEEE80211_SEQ_ADD(seq, incr) \ (((seq) + (incr)) & (IEEE80211_SEQ_RANGE-1)) #define IEEE80211_SEQ_INC(seq) IEEE80211_SEQ_ADD(seq,1) #define IEEE80211_SEQ_SUB(a, b) \ (((a) + IEEE80211_SEQ_RANGE - (b)) & (IEEE80211_SEQ_RANGE-1)) #define IEEE80211_SEQ_BA_RANGE 2048 /* 2^11 */ #define IEEE80211_SEQ_BA_BEFORE(a, b) \ (IEEE80211_SEQ_SUB(b, a+1) < IEEE80211_SEQ_BA_RANGE-1) #define IEEE80211_NWID_LEN 32 #define IEEE80211_MESHID_LEN 32 #define IEEE80211_QOS_TXOP 0x00ff /* bit 8 is reserved */ #define IEEE80211_QOS_AMSDU 0x80 #define IEEE80211_QOS_AMSDU_S 7 #define IEEE80211_QOS_ACKPOLICY 0x60 #define IEEE80211_QOS_ACKPOLICY_S 5 #define IEEE80211_QOS_ACKPOLICY_NOACK 0x20 /* No ACK required */ #define IEEE80211_QOS_ACKPOLICY_BA 0x60 /* Block ACK */ #define IEEE80211_QOS_EOSP 0x10 /* EndOfService Period*/ #define IEEE80211_QOS_EOSP_S 4 #define IEEE80211_QOS_TID 0x0f /* qos[1] byte used for all frames sent by mesh STAs in a mesh BSS */ #define IEEE80211_QOS_MC 0x01 /* Mesh control */ /* Mesh power save level*/ #define IEEE80211_QOS_MESH_PSL 0x02 /* Mesh Receiver Service Period Initiated */ #define IEEE80211_QOS_RSPI 0x04 /* bits 11 to 15 reserved */ /* does frame have QoS sequence control data */ #define IEEE80211_QOS_HAS_SEQ(wh) \ (((wh)->i_fc[0] & \ (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_QOS)) == \ (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS)) /* * WME/802.11e information element. */ struct ieee80211_wme_info { uint8_t wme_id; /* IEEE80211_ELEMID_VENDOR */ uint8_t wme_len; /* length in bytes */ uint8_t wme_oui[3]; /* 0x00, 0x50, 0xf2 */ uint8_t wme_type; /* OUI type */ uint8_t wme_subtype; /* OUI subtype */ uint8_t wme_version; /* spec revision */ uint8_t wme_info; /* QoS info */ } __packed; /* * WME/802.11e Tspec Element */ struct ieee80211_wme_tspec { uint8_t ts_id; uint8_t ts_len; uint8_t ts_oui[3]; uint8_t ts_oui_type; uint8_t ts_oui_subtype; uint8_t ts_version; uint8_t ts_tsinfo[3]; uint8_t ts_nom_msdu[2]; uint8_t ts_max_msdu[2]; uint8_t ts_min_svc[4]; uint8_t ts_max_svc[4]; uint8_t ts_inactv_intv[4]; uint8_t ts_susp_intv[4]; uint8_t ts_start_svc[4]; uint8_t ts_min_rate[4]; uint8_t ts_mean_rate[4]; uint8_t ts_max_burst[4]; uint8_t ts_min_phy[4]; uint8_t ts_peak_rate[4]; uint8_t ts_delay[4]; uint8_t ts_surplus[2]; uint8_t ts_medium_time[2]; } __packed; /* * WME AC parameter field */ struct ieee80211_wme_acparams { uint8_t acp_aci_aifsn; uint8_t acp_logcwminmax; uint16_t acp_txop; } __packed; #define WME_NUM_AC 4 /* 4 AC categories */ #define WME_NUM_TID 16 /* 16 tids */ #define WME_PARAM_ACI 0x60 /* Mask for ACI field */ #define WME_PARAM_ACI_S 5 /* Shift for ACI field */ #define WME_PARAM_ACM 0x10 /* Mask for ACM bit */ #define WME_PARAM_ACM_S 4 /* Shift for ACM bit */ #define WME_PARAM_AIFSN 0x0f /* Mask for aifsn field */ #define WME_PARAM_AIFSN_S 0 /* Shift for aifsn field */ #define WME_PARAM_LOGCWMIN 0x0f /* Mask for CwMin field (in log) */ #define WME_PARAM_LOGCWMIN_S 0 /* Shift for CwMin field */ #define WME_PARAM_LOGCWMAX 0xf0 /* Mask for CwMax field (in log) */ #define WME_PARAM_LOGCWMAX_S 4 /* Shift for CwMax field */ #define WME_AC_TO_TID(_ac) ( \ ((_ac) == WME_AC_VO) ? 6 : \ ((_ac) == WME_AC_VI) ? 5 : \ ((_ac) == WME_AC_BK) ? 1 : \ 0) #define TID_TO_WME_AC(_tid) ( \ ((_tid) == 0 || (_tid) == 3) ? WME_AC_BE : \ ((_tid) < 3) ? WME_AC_BK : \ ((_tid) < 6) ? WME_AC_VI : \ WME_AC_VO) /* * WME Parameter Element */ struct ieee80211_wme_param { uint8_t param_id; uint8_t param_len; uint8_t param_oui[3]; uint8_t param_oui_type; uint8_t param_oui_subtype; uint8_t param_version; uint8_t param_qosInfo; #define WME_QOSINFO_COUNT 0x0f /* Mask for param count field */ uint8_t param_reserved; struct ieee80211_wme_acparams params_acParams[WME_NUM_AC]; } __packed; /* * Management Notification Frame */ struct ieee80211_mnf { uint8_t mnf_category; uint8_t mnf_action; uint8_t mnf_dialog; uint8_t mnf_status; } __packed; #define MNF_SETUP_REQ 0 #define MNF_SETUP_RESP 1 #define MNF_TEARDOWN 2 /* * 802.11n Management Action Frames */ /* generic frame format */ struct ieee80211_action { uint8_t ia_category; uint8_t ia_action; } __packed; #define IEEE80211_ACTION_CAT_SM 0 /* Spectrum Management */ #define IEEE80211_ACTION_CAT_QOS 1 /* QoS */ #define IEEE80211_ACTION_CAT_DLS 2 /* DLS */ #define IEEE80211_ACTION_CAT_BA 3 /* BA */ #define IEEE80211_ACTION_CAT_HT 7 /* HT */ #define IEEE80211_ACTION_CAT_MESH 13 /* Mesh */ #define IEEE80211_ACTION_CAT_SELF_PROT 15 /* Self-protected */ /* 16 - 125 reserved */ #define IEEE80211_ACTION_CAT_VENDOR 127 /* Vendor Specific */ #define IEEE80211_ACTION_HT_TXCHWIDTH 0 /* recommended xmit chan width*/ #define IEEE80211_ACTION_HT_MIMOPWRSAVE 1 /* MIMO power save */ /* HT - recommended transmission channel width */ struct ieee80211_action_ht_txchwidth { struct ieee80211_action at_header; uint8_t at_chwidth; } __packed; #define IEEE80211_A_HT_TXCHWIDTH_20 0 #define IEEE80211_A_HT_TXCHWIDTH_2040 1 /* HT - MIMO Power Save (NB: D2.04) */ struct ieee80211_action_ht_mimopowersave { struct ieee80211_action am_header; uint8_t am_control; } __packed; #define IEEE80211_A_HT_MIMOPWRSAVE_ENA 0x01 /* PS enabled */ #define IEEE80211_A_HT_MIMOPWRSAVE_MODE 0x02 #define IEEE80211_A_HT_MIMOPWRSAVE_MODE_S 1 #define IEEE80211_A_HT_MIMOPWRSAVE_DYNAMIC 0x02 /* Dynamic Mode */ #define IEEE80211_A_HT_MIMOPWRSAVE_STATIC 0x00 /* no SM packets */ /* bits 2-7 reserved */ /* Block Ack actions */ #define IEEE80211_ACTION_BA_ADDBA_REQUEST 0 /* ADDBA request */ #define IEEE80211_ACTION_BA_ADDBA_RESPONSE 1 /* ADDBA response */ #define IEEE80211_ACTION_BA_DELBA 2 /* DELBA */ /* Block Ack Parameter Set */ #define IEEE80211_BAPS_BUFSIZ 0xffc0 /* buffer size */ #define IEEE80211_BAPS_BUFSIZ_S 6 #define IEEE80211_BAPS_TID 0x003c /* TID */ #define IEEE80211_BAPS_TID_S 2 #define IEEE80211_BAPS_POLICY 0x0002 /* block ack policy */ #define IEEE80211_BAPS_POLICY_S 1 #define IEEE80211_BAPS_POLICY_DELAYED (0< IEEE80211_MIN_LEN. The default * mtu is Ethernet-compatible; it's set by ether_ifattach. */ #define IEEE80211_MTU_MAX 2290 #define IEEE80211_MTU_MIN 32 #define IEEE80211_MAX_LEN (2300 + IEEE80211_CRC_LEN + \ (IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN + IEEE80211_WEP_CRCLEN)) #define IEEE80211_ACK_LEN \ (sizeof(struct ieee80211_frame_ack) + IEEE80211_CRC_LEN) #define IEEE80211_MIN_LEN \ (sizeof(struct ieee80211_frame_min) + IEEE80211_CRC_LEN) /* * The 802.11 spec says at most 2007 stations may be * associated at once. For most AP's this is way more * than is feasible so we use a default of IEEE80211_AID_DEF. * This number may be overridden by the driver and/or by * user configuration but may not be less than IEEE80211_AID_MIN * (see _ieee80211.h for implementation-specific settings). */ #define IEEE80211_AID_MAX 2007 #define IEEE80211_AID(b) ((b) &~ 0xc000) /* * RTS frame length parameters. The default is specified in * the 802.11 spec as 512; we treat it as implementation-dependent * so it's defined in ieee80211_var.h. The max may be wrong * for jumbo frames. */ #define IEEE80211_RTS_MIN 1 #define IEEE80211_RTS_MAX 2346 /* * TX fragmentation parameters. As above for RTS, we treat * default as implementation-dependent so define it elsewhere. */ #define IEEE80211_FRAG_MIN 256 #define IEEE80211_FRAG_MAX 2346 /* * Beacon interval (TU's). Min+max come from WiFi requirements. * As above, we treat default as implementation-dependent so * define it elsewhere. */ #define IEEE80211_BINTVAL_MAX 1000 /* max beacon interval (TU's) */ #define IEEE80211_BINTVAL_MIN 25 /* min beacon interval (TU's) */ /* * DTIM period (beacons). Min+max are not really defined * by the protocol but we want them publicly visible so * define them here. */ #define IEEE80211_DTIM_MAX 15 /* max DTIM period */ #define IEEE80211_DTIM_MIN 1 /* min DTIM period */ /* * Beacon miss threshold (beacons). As for DTIM, we define * them here to be publicly visible. Note the max may be * clamped depending on device capabilities. */ #define IEEE80211_HWBMISS_MIN 1 #define IEEE80211_HWBMISS_MAX 255 /* * 802.11 frame duration definitions. */ struct ieee80211_duration { uint16_t d_rts_dur; uint16_t d_data_dur; uint16_t d_plcp_len; uint8_t d_residue; /* unused octets in time slot */ }; /* One Time Unit (TU) is 1Kus = 1024 microseconds. */ #define IEEE80211_DUR_TU 1024 /* IEEE 802.11b durations for DSSS PHY in microseconds */ #define IEEE80211_DUR_DS_LONG_PREAMBLE 144 #define IEEE80211_DUR_DS_SHORT_PREAMBLE 72 #define IEEE80211_DUR_DS_SLOW_PLCPHDR 48 #define IEEE80211_DUR_DS_FAST_PLCPHDR 24 #define IEEE80211_DUR_DS_SLOW_ACK 112 #define IEEE80211_DUR_DS_FAST_ACK 56 #define IEEE80211_DUR_DS_SLOW_CTS 112 #define IEEE80211_DUR_DS_FAST_CTS 56 #define IEEE80211_DUR_DS_SLOT 20 #define IEEE80211_DUR_DS_SIFS 10 #define IEEE80211_DUR_DS_PIFS (IEEE80211_DUR_DS_SIFS + IEEE80211_DUR_DS_SLOT) #define IEEE80211_DUR_DS_DIFS (IEEE80211_DUR_DS_SIFS + \ 2 * IEEE80211_DUR_DS_SLOT) #define IEEE80211_DUR_DS_EIFS (IEEE80211_DUR_DS_SIFS + \ IEEE80211_DUR_DS_SLOW_ACK + \ IEEE80211_DUR_DS_LONG_PREAMBLE + \ IEEE80211_DUR_DS_SLOW_PLCPHDR + \ IEEE80211_DUR_DIFS) #endif /* _NET80211_IEEE80211_H_ */ Index: head/sys/net80211/ieee80211_adhoc.c =================================================================== --- head/sys/net80211/ieee80211_adhoc.c (revision 282819) +++ head/sys/net80211/ieee80211_adhoc.c (revision 282820) @@ -1,964 +1,964 @@ /*- * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #ifdef __FreeBSD__ __FBSDID("$FreeBSD$"); #endif /* * IEEE 802.11 IBSS mode support. */ #include "opt_inet.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif #ifdef IEEE80211_SUPPORT_TDMA #include #endif #include #define IEEE80211_RATE2MBS(r) (((r) & IEEE80211_RATE_VAL) / 2) static void adhoc_vattach(struct ieee80211vap *); static int adhoc_newstate(struct ieee80211vap *, enum ieee80211_state, int); static int adhoc_input(struct ieee80211_node *, struct mbuf *, int, int); static void adhoc_recv_mgmt(struct ieee80211_node *, struct mbuf *, int subtype, int, int); static void ahdemo_recv_mgmt(struct ieee80211_node *, struct mbuf *, int subtype, int, int); static void adhoc_recv_ctl(struct ieee80211_node *, struct mbuf *, int subtype); void ieee80211_adhoc_attach(struct ieee80211com *ic) { ic->ic_vattach[IEEE80211_M_IBSS] = adhoc_vattach; ic->ic_vattach[IEEE80211_M_AHDEMO] = adhoc_vattach; } void ieee80211_adhoc_detach(struct ieee80211com *ic) { } static void adhoc_vdetach(struct ieee80211vap *vap) { } static void adhoc_vattach(struct ieee80211vap *vap) { vap->iv_newstate = adhoc_newstate; vap->iv_input = adhoc_input; if (vap->iv_opmode == IEEE80211_M_IBSS) vap->iv_recv_mgmt = adhoc_recv_mgmt; else vap->iv_recv_mgmt = ahdemo_recv_mgmt; vap->iv_recv_ctl = adhoc_recv_ctl; vap->iv_opdetach = adhoc_vdetach; #ifdef IEEE80211_SUPPORT_TDMA /* * Throw control to tdma support. Note we do this * after setting up our callbacks so it can piggyback * on top of us. */ if (vap->iv_caps & IEEE80211_C_TDMA) ieee80211_tdma_vattach(vap); #endif } static void sta_leave(void *arg, struct ieee80211_node *ni) { struct ieee80211vap *vap = arg; if (ni->ni_vap == vap && ni != vap->iv_bss) ieee80211_node_leave(ni); } /* * IEEE80211_M_IBSS+IEEE80211_M_AHDEMO vap state machine handler. */ static int adhoc_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; enum ieee80211_state ostate; IEEE80211_LOCK_ASSERT(vap->iv_ic); ostate = vap->iv_state; IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate], arg); vap->iv_state = nstate; /* state transition */ if (ostate != IEEE80211_S_SCAN) ieee80211_cancel_scan(vap); /* background scan */ ni = vap->iv_bss; /* NB: no reference held */ switch (nstate) { case IEEE80211_S_INIT: switch (ostate) { case IEEE80211_S_SCAN: ieee80211_cancel_scan(vap); break; default: break; } if (ostate != IEEE80211_S_INIT) { /* NB: optimize INIT -> INIT case */ ieee80211_reset_bss(vap); } break; case IEEE80211_S_SCAN: switch (ostate) { case IEEE80211_S_RUN: /* beacon miss */ /* purge station table; entries are stale */ ieee80211_iterate_nodes(&ic->ic_sta, sta_leave, vap); /* fall thru... */ case IEEE80211_S_INIT: if (vap->iv_des_chan != IEEE80211_CHAN_ANYC && !IEEE80211_IS_CHAN_RADAR(vap->iv_des_chan)) { /* * Already have a channel; bypass the * scan and startup immediately. */ ieee80211_create_ibss(vap, ieee80211_ht_adjust_channel(ic, vap->iv_des_chan, vap->iv_flags_ht)); break; } /* * Initiate a scan. We can come here as a result * of an IEEE80211_IOC_SCAN_REQ too in which case * the vap will be marked with IEEE80211_FEXT_SCANREQ * and the scan request parameters will be present * in iv_scanreq. Otherwise we do the default. */ if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) { ieee80211_check_scan(vap, vap->iv_scanreq_flags, vap->iv_scanreq_duration, vap->iv_scanreq_mindwell, vap->iv_scanreq_maxdwell, vap->iv_scanreq_nssid, vap->iv_scanreq_ssid); vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ; } else ieee80211_check_scan_current(vap); break; case IEEE80211_S_SCAN: /* * This can happen because of a change in state * that requires a reset. Trigger a new scan * unless we're in manual roaming mode in which * case an application must issue an explicit request. */ if (vap->iv_roaming == IEEE80211_ROAMING_AUTO) ieee80211_check_scan_current(vap); break; default: goto invalid; } break; case IEEE80211_S_RUN: if (vap->iv_flags & IEEE80211_F_WPA) { /* XXX validate prerequisites */ } switch (ostate) { case IEEE80211_S_SCAN: #ifdef IEEE80211_DEBUG if (ieee80211_msg_debug(vap)) { ieee80211_note(vap, "synchronized with %s ssid ", ether_sprintf(ni->ni_bssid)); ieee80211_print_essid(vap->iv_bss->ni_essid, ni->ni_esslen); /* XXX MCS/HT */ printf(" channel %d start %uMb\n", ieee80211_chan2ieee(ic, ic->ic_curchan), IEEE80211_RATE2MBS(ni->ni_txrate)); } #endif break; case IEEE80211_S_RUN: /* IBSS merge */ break; default: goto invalid; } /* * When 802.1x is not in use mark the port authorized * at this point so traffic can flow. */ if (ni->ni_authmode != IEEE80211_AUTH_8021X) ieee80211_node_authorize(ni); /* * Fake association when joining an existing bss. */ if (!IEEE80211_ADDR_EQ(ni->ni_macaddr, vap->iv_myaddr) && ic->ic_newassoc != NULL) ic->ic_newassoc(ni, ostate != IEEE80211_S_RUN); break; case IEEE80211_S_SLEEP: vap->iv_sta_ps(vap, 0); break; default: invalid: IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: unexpected state transition %s -> %s\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate]); break; } return 0; } /* * Decide if a received management frame should be * printed when debugging is enabled. This filters some * of the less interesting frames that come frequently * (e.g. beacons). */ static __inline int doprint(struct ieee80211vap *vap, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_BEACON: return (vap->iv_ic->ic_flags & IEEE80211_F_SCAN); case IEEE80211_FC0_SUBTYPE_PROBE_REQ: return 1; } return 1; } /* * Process a received frame. The node associated with the sender * should be supplied. If nothing was found in the node table then * the caller is assumed to supply a reference to iv_bss instead. * The RSSI and a timestamp are also supplied. The RSSI data is used * during AP scanning to select a AP to associate with; it can have * any units so long as values have consistent units and higher values * mean ``better signal''. The receive timestamp is currently not used * by the 802.11 layer. */ static int adhoc_input(struct ieee80211_node *ni, struct mbuf *m, int rssi, int nf) { -#define HAS_SEQ(type) ((type & 0x4) == 0) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ifnet *ifp = vap->iv_ifp; struct ieee80211_frame *wh; struct ieee80211_key *key; struct ether_header *eh; int hdrspace, need_tap = 1; /* mbuf need to be tapped. */ uint8_t dir, type, subtype, qos; uint8_t *bssid; uint16_t rxseq; if (m->m_flags & M_AMPDU_MPDU) { /* * Fastpath for A-MPDU reorder q resubmission. Frames * w/ M_AMPDU_MPDU marked have already passed through * here but were received out of order and been held on * the reorder queue. When resubmitted they are marked * with the M_AMPDU_MPDU flag and we can bypass most of * the normal processing. */ wh = mtod(m, struct ieee80211_frame *); type = IEEE80211_FC0_TYPE_DATA; dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK; subtype = IEEE80211_FC0_SUBTYPE_QOS; hdrspace = ieee80211_hdrspace(ic, wh); /* XXX optimize? */ goto resubmit_ampdu; } KASSERT(ni != NULL, ("null node")); ni->ni_inact = ni->ni_inact_reload; type = -1; /* undefined */ if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "too short (1): len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } /* * Bit of a cheat here, we use a pointer for a 3-address * frame format but don't reference fields past outside * ieee80211_frame_min w/o first validating the data is * present. */ wh = mtod(m, struct ieee80211_frame *); if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "wrong version, fc %02x:%02x", wh->i_fc[0], wh->i_fc[1]); vap->iv_stats.is_rx_badversion++; goto err; } dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK; type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { if (dir != IEEE80211_FC1_DIR_NODS) bssid = wh->i_addr1; else if (type == IEEE80211_FC0_TYPE_CTL) bssid = wh->i_addr1; else { if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "too short (2): len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } bssid = wh->i_addr3; } /* * Validate the bssid. */ if (!(type == IEEE80211_FC0_TYPE_MGT && (subtype == IEEE80211_FC0_SUBTYPE_BEACON || subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP)) && !IEEE80211_ADDR_EQ(bssid, vap->iv_bss->ni_bssid) && !IEEE80211_ADDR_EQ(bssid, ifp->if_broadcastaddr)) { /* not interested in */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, NULL, "%s", "not to bss"); vap->iv_stats.is_rx_wrongbss++; goto out; } /* * Data frame, cons up a node when it doesn't * exist. This should probably done after an ACL check. */ if (type == IEEE80211_FC0_TYPE_DATA && ni == vap->iv_bss && !IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) { /* * Beware of frames that come in too early; we * can receive broadcast frames and creating sta * entries will blow up because there is no bss * channel yet. */ if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "not in RUN state (%s)", ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_rx_badstate++; goto err; } /* * Fake up a node for this newly * discovered member of the IBSS. */ ni = ieee80211_fakeup_adhoc_node(vap, wh->i_addr2); if (ni == NULL) { /* NB: stat kept for alloc failure */ goto err; } } IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi); ni->ni_noise = nf; - if (HAS_SEQ(type) && IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) { + if (IEEE80211_HAS_SEQ(type, subtype) && + IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) { uint8_t tid = ieee80211_gettid(wh); if (IEEE80211_QOS_HAS_SEQ(wh) && TID_TO_WME_AC(tid) >= WME_AC_VI) ic->ic_wme.wme_hipri_traffic++; rxseq = le16toh(*(uint16_t *)wh->i_seq); if (! ieee80211_check_rxseq(ni, wh)) { /* duplicate, discard */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, "duplicate", "seqno <%u,%u> fragno <%u,%u> tid %u", rxseq >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[tid] >> IEEE80211_SEQ_SEQ_SHIFT, rxseq & IEEE80211_SEQ_FRAG_MASK, ni->ni_rxseqs[tid] & IEEE80211_SEQ_FRAG_MASK, tid); vap->iv_stats.is_rx_dup++; IEEE80211_NODE_STAT(ni, rx_dup); goto out; } ni->ni_rxseqs[tid] = rxseq; } } switch (type) { case IEEE80211_FC0_TYPE_DATA: hdrspace = ieee80211_hdrspace(ic, wh); if (m->m_len < hdrspace && (m = m_pullup(m, hdrspace)) == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "data too short: expecting %u", hdrspace); vap->iv_stats.is_rx_tooshort++; goto out; /* XXX */ } if (dir != IEEE80211_FC1_DIR_NODS) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "incorrect dir 0x%x", dir); vap->iv_stats.is_rx_wrongdir++; goto out; } /* XXX no power-save support */ /* * Handle A-MPDU re-ordering. If the frame is to be * processed directly then ieee80211_ampdu_reorder * will return 0; otherwise it has consumed the mbuf * and we should do nothing more with it. */ if ((m->m_flags & M_AMPDU) && ieee80211_ampdu_reorder(ni, m) != 0) { m = NULL; goto out; } resubmit_ampdu: /* * Handle privacy requirements. Note that we * must not be preempted from here until after * we (potentially) call ieee80211_crypto_demic; * otherwise we may violate assumptions in the * crypto cipher modules used to do delayed update * of replay sequence numbers. */ if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) { /* * Discard encrypted frames when privacy is off. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "WEP", "%s", "PRIVACY off"); vap->iv_stats.is_rx_noprivacy++; IEEE80211_NODE_STAT(ni, rx_noprivacy); goto out; } key = ieee80211_crypto_decap(ni, m, hdrspace); if (key == NULL) { /* NB: stats+msgs handled in crypto_decap */ IEEE80211_NODE_STAT(ni, rx_wepfail); goto out; } wh = mtod(m, struct ieee80211_frame *); wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED; } else { /* XXX M_WEP and IEEE80211_F_PRIVACY */ key = NULL; } /* * Save QoS bits for use below--before we strip the header. */ if (subtype == IEEE80211_FC0_SUBTYPE_QOS) { qos = (dir == IEEE80211_FC1_DIR_DSTODS) ? ((struct ieee80211_qosframe_addr4 *)wh)->i_qos[0] : ((struct ieee80211_qosframe *)wh)->i_qos[0]; } else qos = 0; /* * Next up, any fragmentation. */ if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { m = ieee80211_defrag(ni, m, hdrspace); if (m == NULL) { /* Fragment dropped or frame not complete yet */ goto out; } } wh = NULL; /* no longer valid, catch any uses */ /* * Next strip any MSDU crypto bits. */ if (key != NULL && !ieee80211_crypto_demic(vap, key, m, 0)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, ni->ni_macaddr, "data", "%s", "demic error"); vap->iv_stats.is_rx_demicfail++; IEEE80211_NODE_STAT(ni, rx_demicfail); goto out; } /* copy to listener after decrypt */ if (ieee80211_radiotap_active_vap(vap)) ieee80211_radiotap_rx(vap, m); need_tap = 0; /* * Finally, strip the 802.11 header. */ m = ieee80211_decap(vap, m, hdrspace); if (m == NULL) { /* XXX mask bit to check for both */ /* don't count Null data frames as errors */ if (subtype == IEEE80211_FC0_SUBTYPE_NODATA || subtype == IEEE80211_FC0_SUBTYPE_QOS_NULL) goto out; IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, ni->ni_macaddr, "data", "%s", "decap error"); vap->iv_stats.is_rx_decap++; IEEE80211_NODE_STAT(ni, rx_decap); goto err; } eh = mtod(m, struct ether_header *); if (!ieee80211_node_is_authorized(ni)) { /* * Deny any non-PAE frames received prior to * authorization. For open/shared-key * authentication the port is mark authorized * after authentication completes. For 802.1x * the port is not marked authorized by the * authenticator until the handshake has completed. */ if (eh->ether_type != htons(ETHERTYPE_PAE)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, eh->ether_shost, "data", "unauthorized port: ether type 0x%x len %u", eh->ether_type, m->m_pkthdr.len); vap->iv_stats.is_rx_unauth++; IEEE80211_NODE_STAT(ni, rx_unauth); goto err; } } else { /* * When denying unencrypted frames, discard * any non-PAE frames received without encryption. */ if ((vap->iv_flags & IEEE80211_F_DROPUNENC) && (key == NULL && (m->m_flags & M_WEP) == 0) && eh->ether_type != htons(ETHERTYPE_PAE)) { /* * Drop unencrypted frames. */ vap->iv_stats.is_rx_unencrypted++; IEEE80211_NODE_STAT(ni, rx_unencrypted); goto out; } } /* XXX require HT? */ if (qos & IEEE80211_QOS_AMSDU) { m = ieee80211_decap_amsdu(ni, m); if (m == NULL) return IEEE80211_FC0_TYPE_DATA; } else { #ifdef IEEE80211_SUPPORT_SUPERG m = ieee80211_decap_fastframe(vap, ni, m); if (m == NULL) return IEEE80211_FC0_TYPE_DATA; #endif } if (dir == IEEE80211_FC1_DIR_DSTODS && ni->ni_wdsvap != NULL) ieee80211_deliver_data(ni->ni_wdsvap, ni, m); else ieee80211_deliver_data(vap, ni, m); return IEEE80211_FC0_TYPE_DATA; case IEEE80211_FC0_TYPE_MGT: vap->iv_stats.is_rx_mgmt++; IEEE80211_NODE_STAT(ni, rx_mgmt); if (dir != IEEE80211_FC1_DIR_NODS) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "incorrect dir 0x%x", dir); vap->iv_stats.is_rx_wrongdir++; goto err; } if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "mgt", "too short: len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } #ifdef IEEE80211_DEBUG if ((ieee80211_msg_debug(vap) && doprint(vap, subtype)) || ieee80211_msg_dumppkts(vap)) { if_printf(ifp, "received %s from %s rssi %d\n", ieee80211_mgt_subtype_name[subtype >> IEEE80211_FC0_SUBTYPE_SHIFT], ether_sprintf(wh->i_addr2), rssi); } #endif if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "WEP set but not permitted"); vap->iv_stats.is_rx_mgtdiscard++; /* XXX */ goto out; } vap->iv_recv_mgmt(ni, m, subtype, rssi, nf); goto out; case IEEE80211_FC0_TYPE_CTL: vap->iv_stats.is_rx_ctl++; IEEE80211_NODE_STAT(ni, rx_ctrl); vap->iv_recv_ctl(ni, m, subtype); goto out; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "bad", "frame type 0x%x", type); /* should not come here */ break; } err: if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); out: if (m != NULL) { if (need_tap && ieee80211_radiotap_active_vap(vap)) ieee80211_radiotap_rx(vap, m); m_freem(m); } return type; } static int is11bclient(const uint8_t *rates, const uint8_t *xrates) { static const uint32_t brates = (1<<2*1)|(1<<2*2)|(1<<11)|(1<<2*11); int i; /* NB: the 11b clients we care about will not have xrates */ if (xrates != NULL || rates == NULL) return 0; for (i = 0; i < rates[1]; i++) { int r = rates[2+i] & IEEE80211_RATE_VAL; if (r > 2*11 || ((1<ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; uint8_t *frm, *efrm, *sfrm; uint8_t *ssid, *rates, *xrates; #if 0 int ht_state_change = 0; #endif wh = mtod(m0, struct ieee80211_frame *); frm = (uint8_t *)&wh[1]; efrm = mtod(m0, uint8_t *) + m0->m_len; switch (subtype) { case IEEE80211_FC0_SUBTYPE_PROBE_RESP: case IEEE80211_FC0_SUBTYPE_BEACON: { struct ieee80211_scanparams scan; /* * We process beacon/probe response * frames to discover neighbors. */ if (ieee80211_parse_beacon(ni, m0, &scan) != 0) return; /* * Count frame now that we know it's to be processed. */ if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) { vap->iv_stats.is_rx_beacon++; /* XXX remove */ IEEE80211_NODE_STAT(ni, rx_beacons); } else IEEE80211_NODE_STAT(ni, rx_proberesp); /* * If scanning, just pass information to the scan module. */ if (ic->ic_flags & IEEE80211_F_SCAN) { if (ic->ic_flags_ext & IEEE80211_FEXT_PROBECHAN) { /* * Actively scanning a channel marked passive; * send a probe request now that we know there * is 802.11 traffic present. * * XXX check if the beacon we recv'd gives * us what we need and suppress the probe req */ ieee80211_probe_curchan(vap, 1); ic->ic_flags_ext &= ~IEEE80211_FEXT_PROBECHAN; } ieee80211_add_scan(vap, ic->ic_curchan, &scan, wh, subtype, rssi, nf); return; } if (scan.capinfo & IEEE80211_CAPINFO_IBSS) { if (!IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) { /* * Create a new entry in the neighbor table. */ ni = ieee80211_add_neighbor(vap, wh, &scan); } else if (ni->ni_capinfo == 0) { /* * Update faked node created on transmit. * Note this also updates the tsf. */ ieee80211_init_neighbor(ni, wh, &scan); } else { /* * Record tsf for potential resync. */ memcpy(ni->ni_tstamp.data, scan.tstamp, sizeof(ni->ni_tstamp)); } /* * This isn't enabled yet - otherwise it would * update the HT parameters and channel width * from any node, which could lead to lots of * strange behaviour if the 11n nodes aren't * exactly configured to match. */ #if 0 if (scan.htcap != NULL && scan.htinfo != NULL && (vap->iv_flags_ht & IEEE80211_FHT_HT)) { if (ieee80211_ht_updateparams(ni, scan.htcap, scan.htinfo)) ht_state_change = 1; } #endif if (ni != NULL) { IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi); ni->ni_noise = nf; } /* * Same here - the channel width change should * be applied to the specific peer node, not * to the ic. Ie, the interface configuration * should stay in its current channel width; * but it should change the rate control and * any queued frames for the given node only. * * Since there's no (current) way to inform * the driver that a channel width change has * occured for a single node, just stub this * out. */ #if 0 if (ht_state_change) ieee80211_update_chw(ic); #endif } break; } case IEEE80211_FC0_SUBTYPE_PROBE_REQ: if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "wrong state %s", ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_rx_mgtdiscard++; return; } if (IEEE80211_IS_MULTICAST(wh->i_addr2)) { /* frame must be directed */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not unicast"); vap->iv_stats.is_rx_mgtdiscard++; /* XXX stat */ return; } /* * prreq frame format * [tlv] ssid * [tlv] supported rates * [tlv] extended supported rates */ ssid = rates = xrates = NULL; sfrm = frm; while (efrm - frm > 1) { IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return); switch (*frm) { case IEEE80211_ELEMID_SSID: ssid = frm; break; case IEEE80211_ELEMID_RATES: rates = frm; break; case IEEE80211_ELEMID_XRATES: xrates = frm; break; } frm += frm[1] + 2; } IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, return); if (xrates != NULL) IEEE80211_VERIFY_ELEMENT(xrates, IEEE80211_RATE_MAXSIZE - rates[1], return); IEEE80211_VERIFY_ELEMENT(ssid, IEEE80211_NWID_LEN, return); IEEE80211_VERIFY_SSID(vap->iv_bss, ssid, return); if ((vap->iv_flags & IEEE80211_F_HIDESSID) && ssid[1] == 0) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "no ssid with ssid suppression enabled"); vap->iv_stats.is_rx_ssidmismatch++; /*XXX*/ return; } /* XXX find a better class or define it's own */ IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_INPUT, wh->i_addr2, "%s", "recv probe req"); /* * Some legacy 11b clients cannot hack a complete * probe response frame. When the request includes * only a bare-bones rate set, communicate this to * the transmit side. */ ieee80211_send_proberesp(vap, wh->i_addr2, is11bclient(rates, xrates) ? IEEE80211_SEND_LEGACY_11B : 0); break; case IEEE80211_FC0_SUBTYPE_ACTION: case IEEE80211_FC0_SUBTYPE_ACTION_NOACK: if (ni == vap->iv_bss) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "unknown node"); vap->iv_stats.is_rx_mgtdiscard++; } else if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr1) && !IEEE80211_IS_MULTICAST(wh->i_addr1)) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not for us"); vap->iv_stats.is_rx_mgtdiscard++; } else if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "wrong state %s", ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_rx_mgtdiscard++; } else { if (ieee80211_parse_action(ni, m0) == 0) (void)ic->ic_recv_action(ni, wh, frm, efrm); } break; case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: case IEEE80211_FC0_SUBTYPE_ATIM: case IEEE80211_FC0_SUBTYPE_DISASSOC: case IEEE80211_FC0_SUBTYPE_AUTH: case IEEE80211_FC0_SUBTYPE_DEAUTH: IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not handled"); vap->iv_stats.is_rx_mgtdiscard++; break; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "mgt", "subtype 0x%x not handled", subtype); vap->iv_stats.is_rx_badsubtype++; break; } } #undef IEEE80211_VERIFY_LENGTH #undef IEEE80211_VERIFY_ELEMENT static void ahdemo_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0, int subtype, int rssi, int nf) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; /* * Process management frames when scanning; useful for doing * a site-survey. */ if (ic->ic_flags & IEEE80211_F_SCAN) adhoc_recv_mgmt(ni, m0, subtype, rssi, nf); else { wh = mtod(m0, struct ieee80211_frame *); switch (subtype) { case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: case IEEE80211_FC0_SUBTYPE_PROBE_REQ: case IEEE80211_FC0_SUBTYPE_PROBE_RESP: case IEEE80211_FC0_SUBTYPE_BEACON: case IEEE80211_FC0_SUBTYPE_ATIM: case IEEE80211_FC0_SUBTYPE_DISASSOC: case IEEE80211_FC0_SUBTYPE_AUTH: case IEEE80211_FC0_SUBTYPE_DEAUTH: case IEEE80211_FC0_SUBTYPE_ACTION: case IEEE80211_FC0_SUBTYPE_ACTION_NOACK: IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not handled"); vap->iv_stats.is_rx_mgtdiscard++; break; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "mgt", "subtype 0x%x not handled", subtype); vap->iv_stats.is_rx_badsubtype++; break; } } } static void adhoc_recv_ctl(struct ieee80211_node *ni, struct mbuf *m, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_BAR: ieee80211_recv_bar(ni, m); break; } } Index: head/sys/net80211/ieee80211_hostap.c =================================================================== --- head/sys/net80211/ieee80211_hostap.c (revision 282819) +++ head/sys/net80211/ieee80211_hostap.c (revision 282820) @@ -1,2341 +1,2340 @@ /*- * Copyright (c) 2007-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #ifdef __FreeBSD__ __FBSDID("$FreeBSD$"); #endif /* * IEEE 802.11 HOSTAP mode support. */ #include "opt_inet.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif #include #define IEEE80211_RATE2MBS(r) (((r) & IEEE80211_RATE_VAL) / 2) static void hostap_vattach(struct ieee80211vap *); static int hostap_newstate(struct ieee80211vap *, enum ieee80211_state, int); static int hostap_input(struct ieee80211_node *ni, struct mbuf *m, int rssi, int nf); static void hostap_deliver_data(struct ieee80211vap *, struct ieee80211_node *, struct mbuf *); static void hostap_recv_mgmt(struct ieee80211_node *, struct mbuf *, int subtype, int rssi, int nf); static void hostap_recv_ctl(struct ieee80211_node *, struct mbuf *, int); void ieee80211_hostap_attach(struct ieee80211com *ic) { ic->ic_vattach[IEEE80211_M_HOSTAP] = hostap_vattach; } void ieee80211_hostap_detach(struct ieee80211com *ic) { } static void hostap_vdetach(struct ieee80211vap *vap) { } static void hostap_vattach(struct ieee80211vap *vap) { vap->iv_newstate = hostap_newstate; vap->iv_input = hostap_input; vap->iv_recv_mgmt = hostap_recv_mgmt; vap->iv_recv_ctl = hostap_recv_ctl; vap->iv_opdetach = hostap_vdetach; vap->iv_deliver_data = hostap_deliver_data; vap->iv_recv_pspoll = ieee80211_recv_pspoll; } static void sta_disassoc(void *arg, struct ieee80211_node *ni) { struct ieee80211vap *vap = arg; if (ni->ni_vap == vap && ni->ni_associd != 0) { IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DISASSOC, IEEE80211_REASON_ASSOC_LEAVE); ieee80211_node_leave(ni); } } static void sta_csa(void *arg, struct ieee80211_node *ni) { struct ieee80211vap *vap = arg; if (ni->ni_vap == vap && ni->ni_associd != 0) if (ni->ni_inact > vap->iv_inact_init) { ni->ni_inact = vap->iv_inact_init; IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, "%s: inact %u", __func__, ni->ni_inact); } } static void sta_drop(void *arg, struct ieee80211_node *ni) { struct ieee80211vap *vap = arg; if (ni->ni_vap == vap && ni->ni_associd != 0) ieee80211_node_leave(ni); } /* * Does a channel change require associated stations to re-associate * so protocol state is correct. This is used when doing CSA across * bands or similar (e.g. HT -> legacy). */ static int isbandchange(struct ieee80211com *ic) { return ((ic->ic_bsschan->ic_flags ^ ic->ic_csa_newchan->ic_flags) & (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER | IEEE80211_CHAN_HT)) != 0; } /* * IEEE80211_M_HOSTAP vap state machine handler. */ static int hostap_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct ieee80211com *ic = vap->iv_ic; enum ieee80211_state ostate; IEEE80211_LOCK_ASSERT(ic); ostate = vap->iv_state; IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate], arg); vap->iv_state = nstate; /* state transition */ if (ostate != IEEE80211_S_SCAN) ieee80211_cancel_scan(vap); /* background scan */ switch (nstate) { case IEEE80211_S_INIT: switch (ostate) { case IEEE80211_S_SCAN: ieee80211_cancel_scan(vap); break; case IEEE80211_S_CAC: ieee80211_dfs_cac_stop(vap); break; case IEEE80211_S_RUN: ieee80211_iterate_nodes(&ic->ic_sta, sta_disassoc, vap); break; default: break; } if (ostate != IEEE80211_S_INIT) { /* NB: optimize INIT -> INIT case */ ieee80211_reset_bss(vap); } if (vap->iv_auth->ia_detach != NULL) vap->iv_auth->ia_detach(vap); break; case IEEE80211_S_SCAN: switch (ostate) { case IEEE80211_S_CSA: case IEEE80211_S_RUN: ieee80211_iterate_nodes(&ic->ic_sta, sta_disassoc, vap); /* * Clear overlapping BSS state; the beacon frame * will be reconstructed on transition to the RUN * state and the timeout routines check if the flag * is set before doing anything so this is sufficient. */ ic->ic_flags_ext &= ~IEEE80211_FEXT_NONERP_PR; ic->ic_flags_ht &= ~IEEE80211_FHT_NONHT_PR; /* fall thru... */ case IEEE80211_S_CAC: /* * NB: We may get here because of a manual channel * change in which case we need to stop CAC * XXX no need to stop if ostate RUN but it's ok */ ieee80211_dfs_cac_stop(vap); /* fall thru... */ case IEEE80211_S_INIT: if (vap->iv_des_chan != IEEE80211_CHAN_ANYC && !IEEE80211_IS_CHAN_RADAR(vap->iv_des_chan)) { /* * Already have a channel; bypass the * scan and startup immediately. * ieee80211_create_ibss will call back to * move us to RUN state. */ ieee80211_create_ibss(vap, vap->iv_des_chan); break; } /* * Initiate a scan. We can come here as a result * of an IEEE80211_IOC_SCAN_REQ too in which case * the vap will be marked with IEEE80211_FEXT_SCANREQ * and the scan request parameters will be present * in iv_scanreq. Otherwise we do the default. */ if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) { ieee80211_check_scan(vap, vap->iv_scanreq_flags, vap->iv_scanreq_duration, vap->iv_scanreq_mindwell, vap->iv_scanreq_maxdwell, vap->iv_scanreq_nssid, vap->iv_scanreq_ssid); vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ; } else ieee80211_check_scan_current(vap); break; case IEEE80211_S_SCAN: /* * A state change requires a reset; scan. */ ieee80211_check_scan_current(vap); break; default: break; } break; case IEEE80211_S_CAC: /* * Start CAC on a DFS channel. We come here when starting * a bss on a DFS channel (see ieee80211_create_ibss). */ ieee80211_dfs_cac_start(vap); break; case IEEE80211_S_RUN: if (vap->iv_flags & IEEE80211_F_WPA) { /* XXX validate prerequisites */ } switch (ostate) { case IEEE80211_S_INIT: /* * Already have a channel; bypass the * scan and startup immediately. * Note that ieee80211_create_ibss will call * back to do a RUN->RUN state change. */ ieee80211_create_ibss(vap, ieee80211_ht_adjust_channel(ic, ic->ic_curchan, vap->iv_flags_ht)); /* NB: iv_bss is changed on return */ break; case IEEE80211_S_CAC: /* * NB: This is the normal state change when CAC * expires and no radar was detected; no need to * clear the CAC timer as it's already expired. */ /* fall thru... */ case IEEE80211_S_CSA: /* * Shorten inactivity timer of associated stations * to weed out sta's that don't follow a CSA. */ ieee80211_iterate_nodes(&ic->ic_sta, sta_csa, vap); /* * Update bss node channel to reflect where * we landed after CSA. */ ieee80211_node_set_chan(vap->iv_bss, ieee80211_ht_adjust_channel(ic, ic->ic_curchan, ieee80211_htchanflags(vap->iv_bss->ni_chan))); /* XXX bypass debug msgs */ break; case IEEE80211_S_SCAN: case IEEE80211_S_RUN: #ifdef IEEE80211_DEBUG if (ieee80211_msg_debug(vap)) { struct ieee80211_node *ni = vap->iv_bss; ieee80211_note(vap, "synchronized with %s ssid ", ether_sprintf(ni->ni_bssid)); ieee80211_print_essid(ni->ni_essid, ni->ni_esslen); /* XXX MCS/HT */ printf(" channel %d start %uMb\n", ieee80211_chan2ieee(ic, ic->ic_curchan), IEEE80211_RATE2MBS(ni->ni_txrate)); } #endif break; default: break; } /* * Start/stop the authenticator. We delay until here * to allow configuration to happen out of order. */ if (vap->iv_auth->ia_attach != NULL) { /* XXX check failure */ vap->iv_auth->ia_attach(vap); } else if (vap->iv_auth->ia_detach != NULL) { vap->iv_auth->ia_detach(vap); } ieee80211_node_authorize(vap->iv_bss); break; case IEEE80211_S_CSA: if (ostate == IEEE80211_S_RUN && isbandchange(ic)) { /* * On a ``band change'' silently drop associated * stations as they must re-associate before they * can pass traffic (as otherwise protocol state * such as capabilities and the negotiated rate * set may/will be wrong). */ ieee80211_iterate_nodes(&ic->ic_sta, sta_drop, vap); } break; default: break; } return 0; } static void hostap_deliver_data(struct ieee80211vap *vap, struct ieee80211_node *ni, struct mbuf *m) { struct ether_header *eh = mtod(m, struct ether_header *); struct ifnet *ifp = vap->iv_ifp; /* clear driver/net80211 flags before passing up */ #if __FreeBSD_version >= 1000046 m->m_flags &= ~(M_MCAST | M_BCAST); m_clrprotoflags(m); #else m->m_flags &= ~(M_80211_RX | M_MCAST | M_BCAST); #endif KASSERT(vap->iv_opmode == IEEE80211_M_HOSTAP, ("gack, opmode %d", vap->iv_opmode)); /* * Do accounting. */ if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1); IEEE80211_NODE_STAT(ni, rx_data); IEEE80211_NODE_STAT_ADD(ni, rx_bytes, m->m_pkthdr.len); if (ETHER_IS_MULTICAST(eh->ether_dhost)) { m->m_flags |= M_MCAST; /* XXX M_BCAST? */ IEEE80211_NODE_STAT(ni, rx_mcast); } else IEEE80211_NODE_STAT(ni, rx_ucast); /* perform as a bridge within the AP */ if ((vap->iv_flags & IEEE80211_F_NOBRIDGE) == 0) { struct mbuf *mcopy = NULL; if (m->m_flags & M_MCAST) { mcopy = m_dup(m, M_NOWAIT); if (mcopy == NULL) if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); else mcopy->m_flags |= M_MCAST; } else { /* * Check if the destination is associated with the * same vap and authorized to receive traffic. * Beware of traffic destined for the vap itself; * sending it will not work; just let it be delivered * normally. */ struct ieee80211_node *sta = ieee80211_find_vap_node( &vap->iv_ic->ic_sta, vap, eh->ether_dhost); if (sta != NULL) { if (ieee80211_node_is_authorized(sta)) { /* * Beware of sending to ourself; this * needs to happen via the normal * input path. */ if (sta != vap->iv_bss) { mcopy = m; m = NULL; } } else { vap->iv_stats.is_rx_unauth++; IEEE80211_NODE_STAT(sta, rx_unauth); } ieee80211_free_node(sta); } } if (mcopy != NULL) { int len, err; len = mcopy->m_pkthdr.len; err = ieee80211_vap_xmitpkt(vap, mcopy); if (err) { /* NB: IFQ_HANDOFF reclaims mcopy */ } else { if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); } } } if (m != NULL) { /* * Mark frame as coming from vap's interface. */ m->m_pkthdr.rcvif = ifp; if (m->m_flags & M_MCAST) { /* * Spam DWDS vap's w/ multicast traffic. */ /* XXX only if dwds in use? */ ieee80211_dwds_mcast(vap, m); } if (ni->ni_vlan != 0) { /* attach vlan tag */ m->m_pkthdr.ether_vtag = ni->ni_vlan; m->m_flags |= M_VLANTAG; } ifp->if_input(ifp, m); } } /* * Decide if a received management frame should be * printed when debugging is enabled. This filters some * of the less interesting frames that come frequently * (e.g. beacons). */ static __inline int doprint(struct ieee80211vap *vap, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_BEACON: return (vap->iv_ic->ic_flags & IEEE80211_F_SCAN); case IEEE80211_FC0_SUBTYPE_PROBE_REQ: return 0; } return 1; } /* * Process a received frame. The node associated with the sender * should be supplied. If nothing was found in the node table then * the caller is assumed to supply a reference to iv_bss instead. * The RSSI and a timestamp are also supplied. The RSSI data is used * during AP scanning to select a AP to associate with; it can have * any units so long as values have consistent units and higher values * mean ``better signal''. The receive timestamp is currently not used * by the 802.11 layer. */ static int hostap_input(struct ieee80211_node *ni, struct mbuf *m, int rssi, int nf) { -#define HAS_SEQ(type) ((type & 0x4) == 0) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ifnet *ifp = vap->iv_ifp; struct ieee80211_frame *wh; struct ieee80211_key *key; struct ether_header *eh; int hdrspace, need_tap = 1; /* mbuf need to be tapped. */ uint8_t dir, type, subtype, qos; uint8_t *bssid; uint16_t rxseq; if (m->m_flags & M_AMPDU_MPDU) { /* * Fastpath for A-MPDU reorder q resubmission. Frames * w/ M_AMPDU_MPDU marked have already passed through * here but were received out of order and been held on * the reorder queue. When resubmitted they are marked * with the M_AMPDU_MPDU flag and we can bypass most of * the normal processing. */ wh = mtod(m, struct ieee80211_frame *); type = IEEE80211_FC0_TYPE_DATA; dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK; subtype = IEEE80211_FC0_SUBTYPE_QOS; hdrspace = ieee80211_hdrspace(ic, wh); /* XXX optimize? */ goto resubmit_ampdu; } KASSERT(ni != NULL, ("null node")); ni->ni_inact = ni->ni_inact_reload; type = -1; /* undefined */ if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "too short (1): len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } /* * Bit of a cheat here, we use a pointer for a 3-address * frame format but don't reference fields past outside * ieee80211_frame_min w/o first validating the data is * present. */ wh = mtod(m, struct ieee80211_frame *); if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "wrong version, fc %02x:%02x", wh->i_fc[0], wh->i_fc[1]); vap->iv_stats.is_rx_badversion++; goto err; } dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK; type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { if (dir != IEEE80211_FC1_DIR_NODS) bssid = wh->i_addr1; else if (type == IEEE80211_FC0_TYPE_CTL) bssid = wh->i_addr1; else { if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "too short (2): len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } bssid = wh->i_addr3; } /* * Validate the bssid. */ if (!(type == IEEE80211_FC0_TYPE_MGT && subtype == IEEE80211_FC0_SUBTYPE_BEACON) && !IEEE80211_ADDR_EQ(bssid, vap->iv_bss->ni_bssid) && !IEEE80211_ADDR_EQ(bssid, ifp->if_broadcastaddr)) { /* not interested in */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, NULL, "%s", "not to bss"); vap->iv_stats.is_rx_wrongbss++; goto out; } IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi); ni->ni_noise = nf; - if (HAS_SEQ(type)) { + if (IEEE80211_HAS_SEQ(type, subtype)) { uint8_t tid = ieee80211_gettid(wh); if (IEEE80211_QOS_HAS_SEQ(wh) && TID_TO_WME_AC(tid) >= WME_AC_VI) ic->ic_wme.wme_hipri_traffic++; rxseq = le16toh(*(uint16_t *)wh->i_seq); if (! ieee80211_check_rxseq(ni, wh)) { /* duplicate, discard */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, "duplicate", "seqno <%u,%u> fragno <%u,%u> tid %u", rxseq >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[tid] >> IEEE80211_SEQ_SEQ_SHIFT, rxseq & IEEE80211_SEQ_FRAG_MASK, ni->ni_rxseqs[tid] & IEEE80211_SEQ_FRAG_MASK, tid); vap->iv_stats.is_rx_dup++; IEEE80211_NODE_STAT(ni, rx_dup); goto out; } ni->ni_rxseqs[tid] = rxseq; } } switch (type) { case IEEE80211_FC0_TYPE_DATA: hdrspace = ieee80211_hdrspace(ic, wh); if (m->m_len < hdrspace && (m = m_pullup(m, hdrspace)) == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "data too short: expecting %u", hdrspace); vap->iv_stats.is_rx_tooshort++; goto out; /* XXX */ } if (!(dir == IEEE80211_FC1_DIR_TODS || (dir == IEEE80211_FC1_DIR_DSTODS && (vap->iv_flags & IEEE80211_F_DWDS)))) { if (dir != IEEE80211_FC1_DIR_DSTODS) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "incorrect dir 0x%x", dir); } else { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_WDS, wh, "4-address data", "%s", "DWDS not enabled"); } vap->iv_stats.is_rx_wrongdir++; goto out; } /* check if source STA is associated */ if (ni == vap->iv_bss) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "%s", "unknown src"); ieee80211_send_error(ni, wh->i_addr2, IEEE80211_FC0_SUBTYPE_DEAUTH, IEEE80211_REASON_NOT_AUTHED); vap->iv_stats.is_rx_notassoc++; goto err; } if (ni->ni_associd == 0) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "%s", "unassoc src"); IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DISASSOC, IEEE80211_REASON_NOT_ASSOCED); vap->iv_stats.is_rx_notassoc++; goto err; } /* * Check for power save state change. * XXX out-of-order A-MPDU frames? */ if (((wh->i_fc[1] & IEEE80211_FC1_PWR_MGT) ^ (ni->ni_flags & IEEE80211_NODE_PWR_MGT))) vap->iv_node_ps(ni, wh->i_fc[1] & IEEE80211_FC1_PWR_MGT); /* * For 4-address packets handle WDS discovery * notifications. Once a WDS link is setup frames * are just delivered to the WDS vap (see below). */ if (dir == IEEE80211_FC1_DIR_DSTODS && ni->ni_wdsvap == NULL) { if (!ieee80211_node_is_authorized(ni)) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT | IEEE80211_MSG_WDS, wh, "4-address data", "%s", "unauthorized port"); vap->iv_stats.is_rx_unauth++; IEEE80211_NODE_STAT(ni, rx_unauth); goto err; } ieee80211_dwds_discover(ni, m); return type; } /* * Handle A-MPDU re-ordering. If the frame is to be * processed directly then ieee80211_ampdu_reorder * will return 0; otherwise it has consumed the mbuf * and we should do nothing more with it. */ if ((m->m_flags & M_AMPDU) && ieee80211_ampdu_reorder(ni, m) != 0) { m = NULL; goto out; } resubmit_ampdu: /* * Handle privacy requirements. Note that we * must not be preempted from here until after * we (potentially) call ieee80211_crypto_demic; * otherwise we may violate assumptions in the * crypto cipher modules used to do delayed update * of replay sequence numbers. */ if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) { /* * Discard encrypted frames when privacy is off. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "WEP", "%s", "PRIVACY off"); vap->iv_stats.is_rx_noprivacy++; IEEE80211_NODE_STAT(ni, rx_noprivacy); goto out; } key = ieee80211_crypto_decap(ni, m, hdrspace); if (key == NULL) { /* NB: stats+msgs handled in crypto_decap */ IEEE80211_NODE_STAT(ni, rx_wepfail); goto out; } wh = mtod(m, struct ieee80211_frame *); wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED; } else { /* XXX M_WEP and IEEE80211_F_PRIVACY */ key = NULL; } /* * Save QoS bits for use below--before we strip the header. */ if (subtype == IEEE80211_FC0_SUBTYPE_QOS) { qos = (dir == IEEE80211_FC1_DIR_DSTODS) ? ((struct ieee80211_qosframe_addr4 *)wh)->i_qos[0] : ((struct ieee80211_qosframe *)wh)->i_qos[0]; } else qos = 0; /* * Next up, any fragmentation. */ if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { m = ieee80211_defrag(ni, m, hdrspace); if (m == NULL) { /* Fragment dropped or frame not complete yet */ goto out; } } wh = NULL; /* no longer valid, catch any uses */ /* * Next strip any MSDU crypto bits. */ if (key != NULL && !ieee80211_crypto_demic(vap, key, m, 0)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, ni->ni_macaddr, "data", "%s", "demic error"); vap->iv_stats.is_rx_demicfail++; IEEE80211_NODE_STAT(ni, rx_demicfail); goto out; } /* copy to listener after decrypt */ if (ieee80211_radiotap_active_vap(vap)) ieee80211_radiotap_rx(vap, m); need_tap = 0; /* * Finally, strip the 802.11 header. */ m = ieee80211_decap(vap, m, hdrspace); if (m == NULL) { /* XXX mask bit to check for both */ /* don't count Null data frames as errors */ if (subtype == IEEE80211_FC0_SUBTYPE_NODATA || subtype == IEEE80211_FC0_SUBTYPE_QOS_NULL) goto out; IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, ni->ni_macaddr, "data", "%s", "decap error"); vap->iv_stats.is_rx_decap++; IEEE80211_NODE_STAT(ni, rx_decap); goto err; } eh = mtod(m, struct ether_header *); if (!ieee80211_node_is_authorized(ni)) { /* * Deny any non-PAE frames received prior to * authorization. For open/shared-key * authentication the port is mark authorized * after authentication completes. For 802.1x * the port is not marked authorized by the * authenticator until the handshake has completed. */ if (eh->ether_type != htons(ETHERTYPE_PAE)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, eh->ether_shost, "data", "unauthorized port: ether type 0x%x len %u", eh->ether_type, m->m_pkthdr.len); vap->iv_stats.is_rx_unauth++; IEEE80211_NODE_STAT(ni, rx_unauth); goto err; } } else { /* * When denying unencrypted frames, discard * any non-PAE frames received without encryption. */ if ((vap->iv_flags & IEEE80211_F_DROPUNENC) && (key == NULL && (m->m_flags & M_WEP) == 0) && eh->ether_type != htons(ETHERTYPE_PAE)) { /* * Drop unencrypted frames. */ vap->iv_stats.is_rx_unencrypted++; IEEE80211_NODE_STAT(ni, rx_unencrypted); goto out; } } /* XXX require HT? */ if (qos & IEEE80211_QOS_AMSDU) { m = ieee80211_decap_amsdu(ni, m); if (m == NULL) return IEEE80211_FC0_TYPE_DATA; } else { #ifdef IEEE80211_SUPPORT_SUPERG m = ieee80211_decap_fastframe(vap, ni, m); if (m == NULL) return IEEE80211_FC0_TYPE_DATA; #endif } if (dir == IEEE80211_FC1_DIR_DSTODS && ni->ni_wdsvap != NULL) ieee80211_deliver_data(ni->ni_wdsvap, ni, m); else hostap_deliver_data(vap, ni, m); return IEEE80211_FC0_TYPE_DATA; case IEEE80211_FC0_TYPE_MGT: vap->iv_stats.is_rx_mgmt++; IEEE80211_NODE_STAT(ni, rx_mgmt); if (dir != IEEE80211_FC1_DIR_NODS) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "mgt", "incorrect dir 0x%x", dir); vap->iv_stats.is_rx_wrongdir++; goto err; } if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "mgt", "too short: len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } if (IEEE80211_IS_MULTICAST(wh->i_addr2)) { /* ensure return frames are unicast */ IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, NULL, "source is multicast: %s", ether_sprintf(wh->i_addr2)); vap->iv_stats.is_rx_mgtdiscard++; /* XXX stat */ goto out; } #ifdef IEEE80211_DEBUG if ((ieee80211_msg_debug(vap) && doprint(vap, subtype)) || ieee80211_msg_dumppkts(vap)) { if_printf(ifp, "received %s from %s rssi %d\n", ieee80211_mgt_subtype_name[subtype >> IEEE80211_FC0_SUBTYPE_SHIFT], ether_sprintf(wh->i_addr2), rssi); } #endif if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { if (subtype != IEEE80211_FC0_SUBTYPE_AUTH) { /* * Only shared key auth frames with a challenge * should be encrypted, discard all others. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "WEP set but not permitted"); vap->iv_stats.is_rx_mgtdiscard++; /* XXX */ goto out; } if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) { /* * Discard encrypted frames when privacy is off. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "WEP set but PRIVACY off"); vap->iv_stats.is_rx_noprivacy++; goto out; } hdrspace = ieee80211_hdrspace(ic, wh); key = ieee80211_crypto_decap(ni, m, hdrspace); if (key == NULL) { /* NB: stats+msgs handled in crypto_decap */ goto out; } wh = mtod(m, struct ieee80211_frame *); wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED; } /* * Pass the packet to radiotap before calling iv_recv_mgmt(). * Otherwise iv_recv_mgmt() might pass another packet to * radiotap, resulting in out of order packet captures. */ if (ieee80211_radiotap_active_vap(vap)) ieee80211_radiotap_rx(vap, m); need_tap = 0; vap->iv_recv_mgmt(ni, m, subtype, rssi, nf); goto out; case IEEE80211_FC0_TYPE_CTL: vap->iv_stats.is_rx_ctl++; IEEE80211_NODE_STAT(ni, rx_ctrl); vap->iv_recv_ctl(ni, m, subtype); goto out; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "bad", "frame type 0x%x", type); /* should not come here */ break; } err: if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); out: if (m != NULL) { if (need_tap && ieee80211_radiotap_active_vap(vap)) ieee80211_radiotap_rx(vap, m); m_freem(m); } return type; } static void hostap_auth_open(struct ieee80211_node *ni, struct ieee80211_frame *wh, int rssi, int nf, uint16_t seq, uint16_t status) { struct ieee80211vap *vap = ni->ni_vap; KASSERT(vap->iv_state == IEEE80211_S_RUN, ("state %d", vap->iv_state)); if (ni->ni_authmode == IEEE80211_AUTH_SHARED) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "open auth", "bad sta auth mode %u", ni->ni_authmode); vap->iv_stats.is_rx_bad_auth++; /* XXX */ /* * Clear any challenge text that may be there if * a previous shared key auth failed and then an * open auth is attempted. */ if (ni->ni_challenge != NULL) { free(ni->ni_challenge, M_80211_NODE); ni->ni_challenge = NULL; } /* XXX hack to workaround calling convention */ ieee80211_send_error(ni, wh->i_addr2, IEEE80211_FC0_SUBTYPE_AUTH, (seq + 1) | (IEEE80211_STATUS_ALG<<16)); return; } if (seq != IEEE80211_AUTH_OPEN_REQUEST) { vap->iv_stats.is_rx_bad_auth++; return; } /* always accept open authentication requests */ if (ni == vap->iv_bss) { ni = ieee80211_dup_bss(vap, wh->i_addr2); if (ni == NULL) return; } else if ((ni->ni_flags & IEEE80211_NODE_AREF) == 0) (void) ieee80211_ref_node(ni); /* * Mark the node as referenced to reflect that it's * reference count has been bumped to insure it remains * after the transaction completes. */ ni->ni_flags |= IEEE80211_NODE_AREF; /* * Mark the node as requiring a valid association id * before outbound traffic is permitted. */ ni->ni_flags |= IEEE80211_NODE_ASSOCID; if (vap->iv_acl != NULL && vap->iv_acl->iac_getpolicy(vap) == IEEE80211_MACCMD_POLICY_RADIUS) { /* * When the ACL policy is set to RADIUS we defer the * authorization to a user agent. Dispatch an event, * a subsequent MLME call will decide the fate of the * station. If the user agent is not present then the * node will be reclaimed due to inactivity. */ IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_AUTH | IEEE80211_MSG_ACL, ni->ni_macaddr, "%s", "station authentication defered (radius acl)"); ieee80211_notify_node_auth(ni); } else { IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_AUTH, seq + 1); IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, ni->ni_macaddr, "%s", "station authenticated (open)"); /* * When 802.1x is not in use mark the port * authorized at this point so traffic can flow. */ if (ni->ni_authmode != IEEE80211_AUTH_8021X) ieee80211_node_authorize(ni); } } static void hostap_auth_shared(struct ieee80211_node *ni, struct ieee80211_frame *wh, uint8_t *frm, uint8_t *efrm, int rssi, int nf, uint16_t seq, uint16_t status) { struct ieee80211vap *vap = ni->ni_vap; uint8_t *challenge; int allocbs, estatus; KASSERT(vap->iv_state == IEEE80211_S_RUN, ("state %d", vap->iv_state)); /* * NB: this can happen as we allow pre-shared key * authentication to be enabled w/o wep being turned * on so that configuration of these can be done * in any order. It may be better to enforce the * ordering in which case this check would just be * for sanity/consistency. */ if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key auth", "%s", " PRIVACY is disabled"); estatus = IEEE80211_STATUS_ALG; goto bad; } /* * Pre-shared key authentication is evil; accept * it only if explicitly configured (it is supported * mainly for compatibility with clients like Mac OS X). */ if (ni->ni_authmode != IEEE80211_AUTH_AUTO && ni->ni_authmode != IEEE80211_AUTH_SHARED) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key auth", "bad sta auth mode %u", ni->ni_authmode); vap->iv_stats.is_rx_bad_auth++; /* XXX maybe a unique error? */ estatus = IEEE80211_STATUS_ALG; goto bad; } challenge = NULL; if (frm + 1 < efrm) { if ((frm[1] + 2) > (efrm - frm)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key auth", "ie %d/%d too long", frm[0], (frm[1] + 2) - (efrm - frm)); vap->iv_stats.is_rx_bad_auth++; estatus = IEEE80211_STATUS_CHALLENGE; goto bad; } if (*frm == IEEE80211_ELEMID_CHALLENGE) challenge = frm; frm += frm[1] + 2; } switch (seq) { case IEEE80211_AUTH_SHARED_CHALLENGE: case IEEE80211_AUTH_SHARED_RESPONSE: if (challenge == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key auth", "%s", "no challenge"); vap->iv_stats.is_rx_bad_auth++; estatus = IEEE80211_STATUS_CHALLENGE; goto bad; } if (challenge[1] != IEEE80211_CHALLENGE_LEN) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key auth", "bad challenge len %d", challenge[1]); vap->iv_stats.is_rx_bad_auth++; estatus = IEEE80211_STATUS_CHALLENGE; goto bad; } default: break; } switch (seq) { case IEEE80211_AUTH_SHARED_REQUEST: if (ni == vap->iv_bss) { ni = ieee80211_dup_bss(vap, wh->i_addr2); if (ni == NULL) { /* NB: no way to return an error */ return; } allocbs = 1; } else { if ((ni->ni_flags & IEEE80211_NODE_AREF) == 0) (void) ieee80211_ref_node(ni); allocbs = 0; } /* * Mark the node as referenced to reflect that it's * reference count has been bumped to insure it remains * after the transaction completes. */ ni->ni_flags |= IEEE80211_NODE_AREF; /* * Mark the node as requiring a valid associatio id * before outbound traffic is permitted. */ ni->ni_flags |= IEEE80211_NODE_ASSOCID; IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi); ni->ni_noise = nf; if (!ieee80211_alloc_challenge(ni)) { /* NB: don't return error so they rexmit */ return; } get_random_bytes(ni->ni_challenge, IEEE80211_CHALLENGE_LEN); IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, ni, "shared key %sauth request", allocbs ? "" : "re"); /* * When the ACL policy is set to RADIUS we defer the * authorization to a user agent. Dispatch an event, * a subsequent MLME call will decide the fate of the * station. If the user agent is not present then the * node will be reclaimed due to inactivity. */ if (vap->iv_acl != NULL && vap->iv_acl->iac_getpolicy(vap) == IEEE80211_MACCMD_POLICY_RADIUS) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_AUTH | IEEE80211_MSG_ACL, ni->ni_macaddr, "%s", "station authentication defered (radius acl)"); ieee80211_notify_node_auth(ni); return; } break; case IEEE80211_AUTH_SHARED_RESPONSE: if (ni == vap->iv_bss) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key response", "%s", "unknown station"); /* NB: don't send a response */ return; } if (ni->ni_challenge == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key response", "%s", "no challenge recorded"); vap->iv_stats.is_rx_bad_auth++; estatus = IEEE80211_STATUS_CHALLENGE; goto bad; } if (memcmp(ni->ni_challenge, &challenge[2], challenge[1]) != 0) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key response", "%s", "challenge mismatch"); vap->iv_stats.is_rx_auth_fail++; estatus = IEEE80211_STATUS_CHALLENGE; goto bad; } IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, ni, "%s", "station authenticated (shared key)"); ieee80211_node_authorize(ni); break; default: IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key auth", "bad seq %d", seq); vap->iv_stats.is_rx_bad_auth++; estatus = IEEE80211_STATUS_SEQUENCE; goto bad; } IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_AUTH, seq + 1); return; bad: /* * Send an error response; but only when operating as an AP. */ /* XXX hack to workaround calling convention */ ieee80211_send_error(ni, wh->i_addr2, IEEE80211_FC0_SUBTYPE_AUTH, (seq + 1) | (estatus<<16)); } /* * Convert a WPA cipher selector OUI to an internal * cipher algorithm. Where appropriate we also * record any key length. */ static int wpa_cipher(const uint8_t *sel, uint8_t *keylen) { #define WPA_SEL(x) (((x)<<24)|WPA_OUI) uint32_t w = LE_READ_4(sel); switch (w) { case WPA_SEL(WPA_CSE_NULL): return IEEE80211_CIPHER_NONE; case WPA_SEL(WPA_CSE_WEP40): if (keylen) *keylen = 40 / NBBY; return IEEE80211_CIPHER_WEP; case WPA_SEL(WPA_CSE_WEP104): if (keylen) *keylen = 104 / NBBY; return IEEE80211_CIPHER_WEP; case WPA_SEL(WPA_CSE_TKIP): return IEEE80211_CIPHER_TKIP; case WPA_SEL(WPA_CSE_CCMP): return IEEE80211_CIPHER_AES_CCM; } return 32; /* NB: so 1<< is discarded */ #undef WPA_SEL } /* * Convert a WPA key management/authentication algorithm * to an internal code. */ static int wpa_keymgmt(const uint8_t *sel) { #define WPA_SEL(x) (((x)<<24)|WPA_OUI) uint32_t w = LE_READ_4(sel); switch (w) { case WPA_SEL(WPA_ASE_8021X_UNSPEC): return WPA_ASE_8021X_UNSPEC; case WPA_SEL(WPA_ASE_8021X_PSK): return WPA_ASE_8021X_PSK; case WPA_SEL(WPA_ASE_NONE): return WPA_ASE_NONE; } return 0; /* NB: so is discarded */ #undef WPA_SEL } /* * Parse a WPA information element to collect parameters. * Note that we do not validate security parameters; that * is handled by the authenticator; the parsing done here * is just for internal use in making operational decisions. */ static int ieee80211_parse_wpa(struct ieee80211vap *vap, const uint8_t *frm, struct ieee80211_rsnparms *rsn, const struct ieee80211_frame *wh) { uint8_t len = frm[1]; uint32_t w; int n; /* * Check the length once for fixed parts: OUI, type, * version, mcast cipher, and 2 selector counts. * Other, variable-length data, must be checked separately. */ if ((vap->iv_flags & IEEE80211_F_WPA1) == 0) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_WPA, wh, "WPA", "not WPA, flags 0x%x", vap->iv_flags); return IEEE80211_REASON_IE_INVALID; } if (len < 14) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_WPA, wh, "WPA", "too short, len %u", len); return IEEE80211_REASON_IE_INVALID; } frm += 6, len -= 4; /* NB: len is payload only */ /* NB: iswpaoui already validated the OUI and type */ w = LE_READ_2(frm); if (w != WPA_VERSION) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_WPA, wh, "WPA", "bad version %u", w); return IEEE80211_REASON_IE_INVALID; } frm += 2, len -= 2; memset(rsn, 0, sizeof(*rsn)); /* multicast/group cipher */ rsn->rsn_mcastcipher = wpa_cipher(frm, &rsn->rsn_mcastkeylen); frm += 4, len -= 4; /* unicast ciphers */ n = LE_READ_2(frm); frm += 2, len -= 2; if (len < n*4+2) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_WPA, wh, "WPA", "ucast cipher data too short; len %u, n %u", len, n); return IEEE80211_REASON_IE_INVALID; } w = 0; for (; n > 0; n--) { w |= 1<rsn_ucastkeylen); frm += 4, len -= 4; } if (w & (1<rsn_ucastcipher = IEEE80211_CIPHER_TKIP; else rsn->rsn_ucastcipher = IEEE80211_CIPHER_AES_CCM; /* key management algorithms */ n = LE_READ_2(frm); frm += 2, len -= 2; if (len < n*4) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_WPA, wh, "WPA", "key mgmt alg data too short; len %u, n %u", len, n); return IEEE80211_REASON_IE_INVALID; } w = 0; for (; n > 0; n--) { w |= wpa_keymgmt(frm); frm += 4, len -= 4; } if (w & WPA_ASE_8021X_UNSPEC) rsn->rsn_keymgmt = WPA_ASE_8021X_UNSPEC; else rsn->rsn_keymgmt = WPA_ASE_8021X_PSK; if (len > 2) /* optional capabilities */ rsn->rsn_caps = LE_READ_2(frm); return 0; } /* * Convert an RSN cipher selector OUI to an internal * cipher algorithm. Where appropriate we also * record any key length. */ static int rsn_cipher(const uint8_t *sel, uint8_t *keylen) { #define RSN_SEL(x) (((x)<<24)|RSN_OUI) uint32_t w = LE_READ_4(sel); switch (w) { case RSN_SEL(RSN_CSE_NULL): return IEEE80211_CIPHER_NONE; case RSN_SEL(RSN_CSE_WEP40): if (keylen) *keylen = 40 / NBBY; return IEEE80211_CIPHER_WEP; case RSN_SEL(RSN_CSE_WEP104): if (keylen) *keylen = 104 / NBBY; return IEEE80211_CIPHER_WEP; case RSN_SEL(RSN_CSE_TKIP): return IEEE80211_CIPHER_TKIP; case RSN_SEL(RSN_CSE_CCMP): return IEEE80211_CIPHER_AES_CCM; case RSN_SEL(RSN_CSE_WRAP): return IEEE80211_CIPHER_AES_OCB; } return 32; /* NB: so 1<< is discarded */ #undef WPA_SEL } /* * Convert an RSN key management/authentication algorithm * to an internal code. */ static int rsn_keymgmt(const uint8_t *sel) { #define RSN_SEL(x) (((x)<<24)|RSN_OUI) uint32_t w = LE_READ_4(sel); switch (w) { case RSN_SEL(RSN_ASE_8021X_UNSPEC): return RSN_ASE_8021X_UNSPEC; case RSN_SEL(RSN_ASE_8021X_PSK): return RSN_ASE_8021X_PSK; case RSN_SEL(RSN_ASE_NONE): return RSN_ASE_NONE; } return 0; /* NB: so is discarded */ #undef RSN_SEL } /* * Parse a WPA/RSN information element to collect parameters * and validate the parameters against what has been * configured for the system. */ static int ieee80211_parse_rsn(struct ieee80211vap *vap, const uint8_t *frm, struct ieee80211_rsnparms *rsn, const struct ieee80211_frame *wh) { uint8_t len = frm[1]; uint32_t w; int n; /* * Check the length once for fixed parts: * version, mcast cipher, and 2 selector counts. * Other, variable-length data, must be checked separately. */ if ((vap->iv_flags & IEEE80211_F_WPA2) == 0) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_WPA, wh, "WPA", "not RSN, flags 0x%x", vap->iv_flags); return IEEE80211_REASON_IE_INVALID; } if (len < 10) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_WPA, wh, "RSN", "too short, len %u", len); return IEEE80211_REASON_IE_INVALID; } frm += 2; w = LE_READ_2(frm); if (w != RSN_VERSION) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_WPA, wh, "RSN", "bad version %u", w); return IEEE80211_REASON_IE_INVALID; } frm += 2, len -= 2; memset(rsn, 0, sizeof(*rsn)); /* multicast/group cipher */ rsn->rsn_mcastcipher = rsn_cipher(frm, &rsn->rsn_mcastkeylen); frm += 4, len -= 4; /* unicast ciphers */ n = LE_READ_2(frm); frm += 2, len -= 2; if (len < n*4+2) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_WPA, wh, "RSN", "ucast cipher data too short; len %u, n %u", len, n); return IEEE80211_REASON_IE_INVALID; } w = 0; for (; n > 0; n--) { w |= 1<rsn_ucastkeylen); frm += 4, len -= 4; } if (w & (1<rsn_ucastcipher = IEEE80211_CIPHER_TKIP; else rsn->rsn_ucastcipher = IEEE80211_CIPHER_AES_CCM; /* key management algorithms */ n = LE_READ_2(frm); frm += 2, len -= 2; if (len < n*4) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_WPA, wh, "RSN", "key mgmt alg data too short; len %u, n %u", len, n); return IEEE80211_REASON_IE_INVALID; } w = 0; for (; n > 0; n--) { w |= rsn_keymgmt(frm); frm += 4, len -= 4; } if (w & RSN_ASE_8021X_UNSPEC) rsn->rsn_keymgmt = RSN_ASE_8021X_UNSPEC; else rsn->rsn_keymgmt = RSN_ASE_8021X_PSK; /* optional RSN capabilities */ if (len > 2) rsn->rsn_caps = LE_READ_2(frm); /* XXXPMKID */ return 0; } /* * WPA/802.11i assocation request processing. */ static int wpa_assocreq(struct ieee80211_node *ni, struct ieee80211_rsnparms *rsnparms, const struct ieee80211_frame *wh, const uint8_t *wpa, const uint8_t *rsn, uint16_t capinfo) { struct ieee80211vap *vap = ni->ni_vap; uint8_t reason; int badwparsn; ni->ni_flags &= ~(IEEE80211_NODE_WPS|IEEE80211_NODE_TSN); if (wpa == NULL && rsn == NULL) { if (vap->iv_flags_ext & IEEE80211_FEXT_WPS) { /* * W-Fi Protected Setup (WPS) permits * clients to associate and pass EAPOL frames * to establish initial credentials. */ ni->ni_flags |= IEEE80211_NODE_WPS; return 1; } if ((vap->iv_flags_ext & IEEE80211_FEXT_TSN) && (capinfo & IEEE80211_CAPINFO_PRIVACY)) { /* * Transitional Security Network. Permits clients * to associate and use WEP while WPA is configured. */ ni->ni_flags |= IEEE80211_NODE_TSN; return 1; } IEEE80211_DISCARD(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_WPA, wh, NULL, "%s", "no WPA/RSN IE in association request"); vap->iv_stats.is_rx_assoc_badwpaie++; reason = IEEE80211_REASON_IE_INVALID; goto bad; } /* assert right association security credentials */ badwparsn = 0; /* NB: to silence compiler */ switch (vap->iv_flags & IEEE80211_F_WPA) { case IEEE80211_F_WPA1: badwparsn = (wpa == NULL); break; case IEEE80211_F_WPA2: badwparsn = (rsn == NULL); break; case IEEE80211_F_WPA1|IEEE80211_F_WPA2: badwparsn = (wpa == NULL && rsn == NULL); break; } if (badwparsn) { IEEE80211_DISCARD(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_WPA, wh, NULL, "%s", "missing WPA/RSN IE in association request"); vap->iv_stats.is_rx_assoc_badwpaie++; reason = IEEE80211_REASON_IE_INVALID; goto bad; } /* * Parse WPA/RSN information element. */ if (wpa != NULL) reason = ieee80211_parse_wpa(vap, wpa, rsnparms, wh); else reason = ieee80211_parse_rsn(vap, rsn, rsnparms, wh); if (reason != 0) { /* XXX distinguish WPA/RSN? */ vap->iv_stats.is_rx_assoc_badwpaie++; goto bad; } IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_WPA, ni, "%s ie: mc %u/%u uc %u/%u key %u caps 0x%x", wpa != NULL ? "WPA" : "RSN", rsnparms->rsn_mcastcipher, rsnparms->rsn_mcastkeylen, rsnparms->rsn_ucastcipher, rsnparms->rsn_ucastkeylen, rsnparms->rsn_keymgmt, rsnparms->rsn_caps); return 1; bad: ieee80211_node_deauth(ni, reason); return 0; } /* XXX find a better place for definition */ struct l2_update_frame { struct ether_header eh; uint8_t dsap; uint8_t ssap; uint8_t control; uint8_t xid[3]; } __packed; /* * Deliver a TGf L2UF frame on behalf of a station. * This primes any bridge when the station is roaming * between ap's on the same wired network. */ static void ieee80211_deliver_l2uf(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ifnet *ifp = vap->iv_ifp; struct mbuf *m; struct l2_update_frame *l2uf; struct ether_header *eh; m = m_gethdr(M_NOWAIT, MT_DATA); if (m == NULL) { IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni, "%s", "no mbuf for l2uf frame"); vap->iv_stats.is_rx_nobuf++; /* XXX not right */ return; } l2uf = mtod(m, struct l2_update_frame *); eh = &l2uf->eh; /* dst: Broadcast address */ IEEE80211_ADDR_COPY(eh->ether_dhost, ifp->if_broadcastaddr); /* src: associated STA */ IEEE80211_ADDR_COPY(eh->ether_shost, ni->ni_macaddr); eh->ether_type = htons(sizeof(*l2uf) - sizeof(*eh)); l2uf->dsap = 0; l2uf->ssap = 0; l2uf->control = 0xf5; l2uf->xid[0] = 0x81; l2uf->xid[1] = 0x80; l2uf->xid[2] = 0x00; m->m_pkthdr.len = m->m_len = sizeof(*l2uf); hostap_deliver_data(vap, ni, m); } static void ratesetmismatch(struct ieee80211_node *ni, const struct ieee80211_frame *wh, int reassoc, int resp, const char *tag, int rate) { IEEE80211_NOTE_MAC(ni->ni_vap, IEEE80211_MSG_ANY, wh->i_addr2, "deny %s request, %s rate set mismatch, rate/MCS %d", reassoc ? "reassoc" : "assoc", tag, rate & IEEE80211_RATE_VAL); IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_BASIC_RATE); ieee80211_node_leave(ni); } static void capinfomismatch(struct ieee80211_node *ni, const struct ieee80211_frame *wh, int reassoc, int resp, const char *tag, int capinfo) { struct ieee80211vap *vap = ni->ni_vap; IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ANY, wh->i_addr2, "deny %s request, %s mismatch 0x%x", reassoc ? "reassoc" : "assoc", tag, capinfo); IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_CAPINFO); ieee80211_node_leave(ni); vap->iv_stats.is_rx_assoc_capmismatch++; } static void htcapmismatch(struct ieee80211_node *ni, const struct ieee80211_frame *wh, int reassoc, int resp) { IEEE80211_NOTE_MAC(ni->ni_vap, IEEE80211_MSG_ANY, wh->i_addr2, "deny %s request, %s missing HT ie", reassoc ? "reassoc" : "assoc"); /* XXX no better code */ IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_MISSING_HT_CAPS); ieee80211_node_leave(ni); } static void authalgreject(struct ieee80211_node *ni, const struct ieee80211_frame *wh, int algo, int seq, int status) { struct ieee80211vap *vap = ni->ni_vap; IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, NULL, "unsupported alg %d", algo); vap->iv_stats.is_rx_auth_unsupported++; ieee80211_send_error(ni, wh->i_addr2, IEEE80211_FC0_SUBTYPE_AUTH, seq | (status << 16)); } static __inline int ishtmixed(const uint8_t *ie) { const struct ieee80211_ie_htinfo *ht = (const struct ieee80211_ie_htinfo *) ie; return (ht->hi_byte2 & IEEE80211_HTINFO_OPMODE) == IEEE80211_HTINFO_OPMODE_MIXED; } static int is11bclient(const uint8_t *rates, const uint8_t *xrates) { static const uint32_t brates = (1<<2*1)|(1<<2*2)|(1<<11)|(1<<2*11); int i; /* NB: the 11b clients we care about will not have xrates */ if (xrates != NULL || rates == NULL) return 0; for (i = 0; i < rates[1]; i++) { int r = rates[2+i] & IEEE80211_RATE_VAL; if (r > 2*11 || ((1<ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; uint8_t *frm, *efrm, *sfrm; uint8_t *ssid, *rates, *xrates, *wpa, *rsn, *wme, *ath, *htcap; int reassoc, resp; uint8_t rate; wh = mtod(m0, struct ieee80211_frame *); frm = (uint8_t *)&wh[1]; efrm = mtod(m0, uint8_t *) + m0->m_len; switch (subtype) { case IEEE80211_FC0_SUBTYPE_PROBE_RESP: case IEEE80211_FC0_SUBTYPE_BEACON: { struct ieee80211_scanparams scan; /* * We process beacon/probe response frames when scanning; * otherwise we check beacon frames for overlapping non-ERP * BSS in 11g and/or overlapping legacy BSS when in HT. */ if ((ic->ic_flags & IEEE80211_F_SCAN) == 0 && subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) { vap->iv_stats.is_rx_mgtdiscard++; return; } /* NB: accept off-channel frames */ if (ieee80211_parse_beacon(ni, m0, &scan) &~ IEEE80211_BPARSE_OFFCHAN) return; /* * Count frame now that we know it's to be processed. */ if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) { vap->iv_stats.is_rx_beacon++; /* XXX remove */ IEEE80211_NODE_STAT(ni, rx_beacons); } else IEEE80211_NODE_STAT(ni, rx_proberesp); /* * If scanning, just pass information to the scan module. */ if (ic->ic_flags & IEEE80211_F_SCAN) { if (scan.status == 0 && /* NB: on channel */ (ic->ic_flags_ext & IEEE80211_FEXT_PROBECHAN)) { /* * Actively scanning a channel marked passive; * send a probe request now that we know there * is 802.11 traffic present. * * XXX check if the beacon we recv'd gives * us what we need and suppress the probe req */ ieee80211_probe_curchan(vap, 1); ic->ic_flags_ext &= ~IEEE80211_FEXT_PROBECHAN; } ieee80211_add_scan(vap, ic->ic_curchan, &scan, wh, subtype, rssi, nf); return; } /* * Check beacon for overlapping bss w/ non ERP stations. * If we detect one and protection is configured but not * enabled, enable it and start a timer that'll bring us * out if we stop seeing the bss. */ if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) && scan.status == 0 && /* NB: on-channel */ ((scan.erp & 0x100) == 0 || /* NB: no ERP, 11b sta*/ (scan.erp & IEEE80211_ERP_NON_ERP_PRESENT))) { ic->ic_lastnonerp = ticks; ic->ic_flags_ext |= IEEE80211_FEXT_NONERP_PR; if (ic->ic_protmode != IEEE80211_PROT_NONE && (ic->ic_flags & IEEE80211_F_USEPROT) == 0) { IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_ASSOC, wh, "non-ERP present on channel %d " "(saw erp 0x%x from channel %d), " "enable use of protection", ic->ic_curchan->ic_ieee, scan.erp, scan.chan); ic->ic_flags |= IEEE80211_F_USEPROT; ieee80211_notify_erp(ic); } } /* * Check beacon for non-HT station on HT channel * and update HT BSS occupancy as appropriate. */ if (IEEE80211_IS_CHAN_HT(ic->ic_curchan)) { if (scan.status & IEEE80211_BPARSE_OFFCHAN) { /* * Off control channel; only check frames * that come in the extension channel when * operating w/ HT40. */ if (!IEEE80211_IS_CHAN_HT40(ic->ic_curchan)) break; if (scan.chan != ic->ic_curchan->ic_extieee) break; } if (scan.htinfo == NULL) { ieee80211_htprot_update(ic, IEEE80211_HTINFO_OPMODE_PROTOPT | IEEE80211_HTINFO_NONHT_PRESENT); } else if (ishtmixed(scan.htinfo)) { /* XXX? take NONHT_PRESENT from beacon? */ ieee80211_htprot_update(ic, IEEE80211_HTINFO_OPMODE_MIXED | IEEE80211_HTINFO_NONHT_PRESENT); } } break; } case IEEE80211_FC0_SUBTYPE_PROBE_REQ: if (vap->iv_state != IEEE80211_S_RUN) { vap->iv_stats.is_rx_mgtdiscard++; return; } /* * Consult the ACL policy module if setup. */ if (vap->iv_acl != NULL && !vap->iv_acl->iac_check(vap, wh)) { IEEE80211_DISCARD(vap, IEEE80211_MSG_ACL, wh, NULL, "%s", "disallowed by ACL"); vap->iv_stats.is_rx_acl++; return; } /* * prreq frame format * [tlv] ssid * [tlv] supported rates * [tlv] extended supported rates */ ssid = rates = xrates = NULL; sfrm = frm; while (efrm - frm > 1) { IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return); switch (*frm) { case IEEE80211_ELEMID_SSID: ssid = frm; break; case IEEE80211_ELEMID_RATES: rates = frm; break; case IEEE80211_ELEMID_XRATES: xrates = frm; break; } frm += frm[1] + 2; } IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, return); if (xrates != NULL) IEEE80211_VERIFY_ELEMENT(xrates, IEEE80211_RATE_MAXSIZE - rates[1], return); IEEE80211_VERIFY_ELEMENT(ssid, IEEE80211_NWID_LEN, return); IEEE80211_VERIFY_SSID(vap->iv_bss, ssid, return); if ((vap->iv_flags & IEEE80211_F_HIDESSID) && ssid[1] == 0) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "no ssid with ssid suppression enabled"); vap->iv_stats.is_rx_ssidmismatch++; /*XXX*/ return; } /* XXX find a better class or define it's own */ IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_INPUT, wh->i_addr2, "%s", "recv probe req"); /* * Some legacy 11b clients cannot hack a complete * probe response frame. When the request includes * only a bare-bones rate set, communicate this to * the transmit side. */ ieee80211_send_proberesp(vap, wh->i_addr2, is11bclient(rates, xrates) ? IEEE80211_SEND_LEGACY_11B : 0); break; case IEEE80211_FC0_SUBTYPE_AUTH: { uint16_t algo, seq, status; if (vap->iv_state != IEEE80211_S_RUN) { vap->iv_stats.is_rx_mgtdiscard++; return; } if (!IEEE80211_ADDR_EQ(wh->i_addr3, vap->iv_bss->ni_bssid)) { IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, NULL, "%s", "wrong bssid"); vap->iv_stats.is_rx_wrongbss++; /*XXX unique stat?*/ return; } /* * auth frame format * [2] algorithm * [2] sequence * [2] status * [tlv*] challenge */ IEEE80211_VERIFY_LENGTH(efrm - frm, 6, return); algo = le16toh(*(uint16_t *)frm); seq = le16toh(*(uint16_t *)(frm + 2)); status = le16toh(*(uint16_t *)(frm + 4)); IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_AUTH, wh->i_addr2, "recv auth frame with algorithm %d seq %d", algo, seq); /* * Consult the ACL policy module if setup. */ if (vap->iv_acl != NULL && !vap->iv_acl->iac_check(vap, wh)) { IEEE80211_DISCARD(vap, IEEE80211_MSG_ACL, wh, NULL, "%s", "disallowed by ACL"); vap->iv_stats.is_rx_acl++; ieee80211_send_error(ni, wh->i_addr2, IEEE80211_FC0_SUBTYPE_AUTH, (seq+1) | (IEEE80211_STATUS_UNSPECIFIED<<16)); return; } if (vap->iv_flags & IEEE80211_F_COUNTERM) { IEEE80211_DISCARD(vap, IEEE80211_MSG_AUTH | IEEE80211_MSG_CRYPTO, wh, NULL, "%s", "TKIP countermeasures enabled"); vap->iv_stats.is_rx_auth_countermeasures++; ieee80211_send_error(ni, wh->i_addr2, IEEE80211_FC0_SUBTYPE_AUTH, IEEE80211_REASON_MIC_FAILURE); return; } if (algo == IEEE80211_AUTH_ALG_SHARED) hostap_auth_shared(ni, wh, frm + 6, efrm, rssi, nf, seq, status); else if (algo == IEEE80211_AUTH_ALG_OPEN) hostap_auth_open(ni, wh, rssi, nf, seq, status); else if (algo == IEEE80211_AUTH_ALG_LEAP) { authalgreject(ni, wh, algo, seq+1, IEEE80211_STATUS_ALG); return; } else { /* * We assume that an unknown algorithm is the result * of a decryption failure on a shared key auth frame; * return a status code appropriate for that instead * of IEEE80211_STATUS_ALG. * * NB: a seq# of 4 is intentional; the decrypted * frame likely has a bogus seq value. */ authalgreject(ni, wh, algo, 4, IEEE80211_STATUS_CHALLENGE); return; } break; } case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: { uint16_t capinfo, lintval; struct ieee80211_rsnparms rsnparms; if (vap->iv_state != IEEE80211_S_RUN) { vap->iv_stats.is_rx_mgtdiscard++; return; } if (!IEEE80211_ADDR_EQ(wh->i_addr3, vap->iv_bss->ni_bssid)) { IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, NULL, "%s", "wrong bssid"); vap->iv_stats.is_rx_assoc_bss++; return; } if (subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) { reassoc = 1; resp = IEEE80211_FC0_SUBTYPE_REASSOC_RESP; } else { reassoc = 0; resp = IEEE80211_FC0_SUBTYPE_ASSOC_RESP; } if (ni == vap->iv_bss) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ANY, wh->i_addr2, "deny %s request, sta not authenticated", reassoc ? "reassoc" : "assoc"); ieee80211_send_error(ni, wh->i_addr2, IEEE80211_FC0_SUBTYPE_DEAUTH, IEEE80211_REASON_ASSOC_NOT_AUTHED); vap->iv_stats.is_rx_assoc_notauth++; return; } /* * asreq frame format * [2] capability information * [2] listen interval * [6*] current AP address (reassoc only) * [tlv] ssid * [tlv] supported rates * [tlv] extended supported rates * [tlv] WPA or RSN * [tlv] HT capabilities * [tlv] Atheros capabilities */ IEEE80211_VERIFY_LENGTH(efrm - frm, (reassoc ? 10 : 4), return); capinfo = le16toh(*(uint16_t *)frm); frm += 2; lintval = le16toh(*(uint16_t *)frm); frm += 2; if (reassoc) frm += 6; /* ignore current AP info */ ssid = rates = xrates = wpa = rsn = wme = ath = htcap = NULL; sfrm = frm; while (efrm - frm > 1) { IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return); switch (*frm) { case IEEE80211_ELEMID_SSID: ssid = frm; break; case IEEE80211_ELEMID_RATES: rates = frm; break; case IEEE80211_ELEMID_XRATES: xrates = frm; break; case IEEE80211_ELEMID_RSN: rsn = frm; break; case IEEE80211_ELEMID_HTCAP: htcap = frm; break; case IEEE80211_ELEMID_VENDOR: if (iswpaoui(frm)) wpa = frm; else if (iswmeinfo(frm)) wme = frm; #ifdef IEEE80211_SUPPORT_SUPERG else if (isatherosoui(frm)) ath = frm; #endif else if (vap->iv_flags_ht & IEEE80211_FHT_HTCOMPAT) { if (ishtcapoui(frm) && htcap == NULL) htcap = frm; } break; } frm += frm[1] + 2; } IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, return); if (xrates != NULL) IEEE80211_VERIFY_ELEMENT(xrates, IEEE80211_RATE_MAXSIZE - rates[1], return); IEEE80211_VERIFY_ELEMENT(ssid, IEEE80211_NWID_LEN, return); IEEE80211_VERIFY_SSID(vap->iv_bss, ssid, return); if (htcap != NULL) { IEEE80211_VERIFY_LENGTH(htcap[1], htcap[0] == IEEE80211_ELEMID_VENDOR ? 4 + sizeof(struct ieee80211_ie_htcap)-2 : sizeof(struct ieee80211_ie_htcap)-2, return); /* XXX just NULL out? */ } if ((vap->iv_flags & IEEE80211_F_WPA) && !wpa_assocreq(ni, &rsnparms, wh, wpa, rsn, capinfo)) return; /* discard challenge after association */ if (ni->ni_challenge != NULL) { free(ni->ni_challenge, M_80211_NODE); ni->ni_challenge = NULL; } /* NB: 802.11 spec says to ignore station's privacy bit */ if ((capinfo & IEEE80211_CAPINFO_ESS) == 0) { capinfomismatch(ni, wh, reassoc, resp, "capability", capinfo); return; } /* * Disallow re-associate w/ invalid slot time setting. */ if (ni->ni_associd != 0 && IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) && ((ni->ni_capinfo ^ capinfo) & IEEE80211_CAPINFO_SHORT_SLOTTIME)) { capinfomismatch(ni, wh, reassoc, resp, "slot time", capinfo); return; } rate = ieee80211_setup_rates(ni, rates, xrates, IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE | IEEE80211_F_DONEGO | IEEE80211_F_DODEL); if (rate & IEEE80211_RATE_BASIC) { ratesetmismatch(ni, wh, reassoc, resp, "legacy", rate); vap->iv_stats.is_rx_assoc_norate++; return; } /* * If constrained to 11g-only stations reject an * 11b-only station. We cheat a bit here by looking * at the max negotiated xmit rate and assuming anyone * with a best rate <24Mb/s is an 11b station. */ if ((vap->iv_flags & IEEE80211_F_PUREG) && rate < 48) { ratesetmismatch(ni, wh, reassoc, resp, "11g", rate); vap->iv_stats.is_rx_assoc_norate++; return; } /* * Do HT rate set handling and setup HT node state. */ ni->ni_chan = vap->iv_bss->ni_chan; if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && htcap != NULL) { rate = ieee80211_setup_htrates(ni, htcap, IEEE80211_F_DOFMCS | IEEE80211_F_DONEGO | IEEE80211_F_DOBRS); if (rate & IEEE80211_RATE_BASIC) { ratesetmismatch(ni, wh, reassoc, resp, "HT", rate); vap->iv_stats.is_ht_assoc_norate++; return; } ieee80211_ht_node_init(ni); ieee80211_ht_updatehtcap(ni, htcap); } else if (ni->ni_flags & IEEE80211_NODE_HT) ieee80211_ht_node_cleanup(ni); #ifdef IEEE80211_SUPPORT_SUPERG else if (ni->ni_ath_flags & IEEE80211_NODE_ATH) ieee80211_ff_node_cleanup(ni); #endif /* * Allow AMPDU operation only with unencrypted traffic * or AES-CCM; the 11n spec only specifies these ciphers * so permitting any others is undefined and can lead * to interoperability problems. */ if ((ni->ni_flags & IEEE80211_NODE_HT) && (((vap->iv_flags & IEEE80211_F_WPA) && rsnparms.rsn_ucastcipher != IEEE80211_CIPHER_AES_CCM) || (vap->iv_flags & (IEEE80211_F_WPA|IEEE80211_F_PRIVACY)) == IEEE80211_F_PRIVACY)) { IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_11N, ni, "disallow HT use because WEP or TKIP requested, " "capinfo 0x%x ucastcipher %d", capinfo, rsnparms.rsn_ucastcipher); ieee80211_ht_node_cleanup(ni); vap->iv_stats.is_ht_assoc_downgrade++; } /* * If constrained to 11n-only stations reject legacy stations. */ if ((vap->iv_flags_ht & IEEE80211_FHT_PUREN) && (ni->ni_flags & IEEE80211_NODE_HT) == 0) { htcapmismatch(ni, wh, reassoc, resp); vap->iv_stats.is_ht_assoc_nohtcap++; return; } IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi); ni->ni_noise = nf; ni->ni_intval = lintval; ni->ni_capinfo = capinfo; ni->ni_fhdwell = vap->iv_bss->ni_fhdwell; ni->ni_fhindex = vap->iv_bss->ni_fhindex; /* * Store the IEs. * XXX maybe better to just expand */ if (ieee80211_ies_init(&ni->ni_ies, sfrm, efrm - sfrm)) { #define setie(_ie, _off) ieee80211_ies_setie(ni->ni_ies, _ie, _off) if (wpa != NULL) setie(wpa_ie, wpa - sfrm); if (rsn != NULL) setie(rsn_ie, rsn - sfrm); if (htcap != NULL) setie(htcap_ie, htcap - sfrm); if (wme != NULL) { setie(wme_ie, wme - sfrm); /* * Mark node as capable of QoS. */ ni->ni_flags |= IEEE80211_NODE_QOS; } else ni->ni_flags &= ~IEEE80211_NODE_QOS; #ifdef IEEE80211_SUPPORT_SUPERG if (ath != NULL) { setie(ath_ie, ath - sfrm); /* * Parse ATH station parameters. */ ieee80211_parse_ath(ni, ni->ni_ies.ath_ie); } else #endif ni->ni_ath_flags = 0; #undef setie } else { ni->ni_flags &= ~IEEE80211_NODE_QOS; ni->ni_ath_flags = 0; } ieee80211_node_join(ni, resp); ieee80211_deliver_l2uf(ni); break; } case IEEE80211_FC0_SUBTYPE_DEAUTH: case IEEE80211_FC0_SUBTYPE_DISASSOC: { uint16_t reason; if (vap->iv_state != IEEE80211_S_RUN || /* NB: can happen when in promiscuous mode */ !IEEE80211_ADDR_EQ(wh->i_addr1, vap->iv_myaddr)) { vap->iv_stats.is_rx_mgtdiscard++; break; } /* * deauth/disassoc frame format * [2] reason */ IEEE80211_VERIFY_LENGTH(efrm - frm, 2, return); reason = le16toh(*(uint16_t *)frm); if (subtype == IEEE80211_FC0_SUBTYPE_DEAUTH) { vap->iv_stats.is_rx_deauth++; IEEE80211_NODE_STAT(ni, rx_deauth); } else { vap->iv_stats.is_rx_disassoc++; IEEE80211_NODE_STAT(ni, rx_disassoc); } IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, "recv %s (reason %d)", ieee80211_mgt_subtype_name[subtype >> IEEE80211_FC0_SUBTYPE_SHIFT], reason); if (ni != vap->iv_bss) ieee80211_node_leave(ni); break; } case IEEE80211_FC0_SUBTYPE_ACTION: case IEEE80211_FC0_SUBTYPE_ACTION_NOACK: if (ni == vap->iv_bss) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "unknown node"); vap->iv_stats.is_rx_mgtdiscard++; } else if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr1) && !IEEE80211_IS_MULTICAST(wh->i_addr1)) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not for us"); vap->iv_stats.is_rx_mgtdiscard++; } else if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "wrong state %s", ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_rx_mgtdiscard++; } else { if (ieee80211_parse_action(ni, m0) == 0) (void)ic->ic_recv_action(ni, wh, frm, efrm); } break; case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: case IEEE80211_FC0_SUBTYPE_ATIM: IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not handled"); vap->iv_stats.is_rx_mgtdiscard++; break; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "mgt", "subtype 0x%x not handled", subtype); vap->iv_stats.is_rx_badsubtype++; break; } } static void hostap_recv_ctl(struct ieee80211_node *ni, struct mbuf *m, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_PS_POLL: ni->ni_vap->iv_recv_pspoll(ni, m); break; case IEEE80211_FC0_SUBTYPE_BAR: ieee80211_recv_bar(ni, m); break; } } /* * Process a received ps-poll frame. */ void ieee80211_recv_pspoll(struct ieee80211_node *ni, struct mbuf *m0) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = vap->iv_ic; struct ieee80211_frame_min *wh; struct mbuf *m; uint16_t aid; int qlen; wh = mtod(m0, struct ieee80211_frame_min *); if (ni->ni_associd == 0) { IEEE80211_DISCARD(vap, IEEE80211_MSG_POWER | IEEE80211_MSG_DEBUG, (struct ieee80211_frame *) wh, NULL, "%s", "unassociated station"); vap->iv_stats.is_ps_unassoc++; IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, IEEE80211_REASON_NOT_ASSOCED); return; } aid = le16toh(*(uint16_t *)wh->i_dur); if (aid != ni->ni_associd) { IEEE80211_DISCARD(vap, IEEE80211_MSG_POWER | IEEE80211_MSG_DEBUG, (struct ieee80211_frame *) wh, NULL, "aid mismatch: sta aid 0x%x poll aid 0x%x", ni->ni_associd, aid); vap->iv_stats.is_ps_badaid++; /* * NB: We used to deauth the station but it turns out * the Blackberry Curve 8230 (and perhaps other devices) * sometimes send the wrong AID when WME is negotiated. * Being more lenient here seems ok as we already check * the station is associated and we only return frames * queued for the station (i.e. we don't use the AID). */ return; } /* Okay, take the first queued packet and put it out... */ m = ieee80211_node_psq_dequeue(ni, &qlen); if (m == NULL) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_POWER, wh->i_addr2, "%s", "recv ps-poll, but queue empty"); ieee80211_send_nulldata(ieee80211_ref_node(ni)); vap->iv_stats.is_ps_qempty++; /* XXX node stat */ if (vap->iv_set_tim != NULL) vap->iv_set_tim(ni, 0); /* just in case */ return; } /* * If there are more packets, set the more packets bit * in the packet dispatched to the station; otherwise * turn off the TIM bit. */ if (qlen != 0) { IEEE80211_NOTE(vap, IEEE80211_MSG_POWER, ni, "recv ps-poll, send packet, %u still queued", qlen); m->m_flags |= M_MORE_DATA; } else { IEEE80211_NOTE(vap, IEEE80211_MSG_POWER, ni, "%s", "recv ps-poll, send packet, queue empty"); if (vap->iv_set_tim != NULL) vap->iv_set_tim(ni, 0); } m->m_flags |= M_PWR_SAV; /* bypass PS handling */ /* * Do the right thing; if it's an encap'ed frame then * call ieee80211_parent_xmitpkt() (and free the ref) else * call ieee80211_vap_xmitpkt(). */ if (m->m_flags & M_ENCAP) { if (ieee80211_parent_xmitpkt(ic, m) != 0) ieee80211_free_node(ni); } else { (void) ieee80211_vap_xmitpkt(vap, m); } } Index: head/sys/net80211/ieee80211_input.h =================================================================== --- head/sys/net80211/ieee80211_input.h (revision 282819) +++ head/sys/net80211/ieee80211_input.h (revision 282820) @@ -1,258 +1,260 @@ /*- * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_INPUT_H_ #define _NET80211_IEEE80211_INPUT_H_ /* Verify the existence and length of __elem or get out. */ #define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen, _action) do { \ if ((__elem) == NULL) { \ IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ wh, NULL, "%s", "no " #__elem ); \ vap->iv_stats.is_rx_elem_missing++; \ _action; \ } else if ((__elem)[1] > (__maxlen)) { \ IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ wh, NULL, "bad " #__elem " len %d", (__elem)[1]); \ vap->iv_stats.is_rx_elem_toobig++; \ _action; \ } \ } while (0) #define IEEE80211_VERIFY_LENGTH(_len, _minlen, _action) do { \ if ((_len) < (_minlen)) { \ IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ wh, NULL, "ie too short, got %d, expected %d", \ (_len), (_minlen)); \ vap->iv_stats.is_rx_elem_toosmall++; \ _action; \ } \ } while (0) #ifdef IEEE80211_DEBUG void ieee80211_ssid_mismatch(struct ieee80211vap *, const char *tag, uint8_t mac[IEEE80211_ADDR_LEN], uint8_t *ssid); #define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do { \ if ((_ssid)[1] != 0 && \ ((_ssid)[1] != (_ni)->ni_esslen || \ memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) { \ if (ieee80211_msg_input(vap)) \ ieee80211_ssid_mismatch(vap, \ ieee80211_mgt_subtype_name[subtype >> \ IEEE80211_FC0_SUBTYPE_SHIFT], \ wh->i_addr2, _ssid); \ vap->iv_stats.is_rx_ssidmismatch++; \ _action; \ } \ } while (0) #else /* !IEEE80211_DEBUG */ #define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do { \ if ((_ssid)[1] != 0 && \ ((_ssid)[1] != (_ni)->ni_esslen || \ memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) { \ vap->iv_stats.is_rx_ssidmismatch++; \ _action; \ } \ } while (0) #endif /* !IEEE80211_DEBUG */ /* unalligned little endian access */ #define LE_READ_2(p) \ ((uint16_t) \ ((((const uint8_t *)(p))[0] ) | \ (((const uint8_t *)(p))[1] << 8))) #define LE_READ_4(p) \ ((uint32_t) \ ((((const uint8_t *)(p))[0] ) | \ (((const uint8_t *)(p))[1] << 8) | \ (((const uint8_t *)(p))[2] << 16) | \ (((const uint8_t *)(p))[3] << 24))) static __inline int iswpaoui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI); } static __inline int iswmeoui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI); } static __inline int iswmeparam(const uint8_t *frm) { return frm[1] > 5 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) && frm[6] == WME_PARAM_OUI_SUBTYPE; } static __inline int iswmeinfo(const uint8_t *frm) { return frm[1] > 5 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) && frm[6] == WME_INFO_OUI_SUBTYPE; } static __inline int isatherosoui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI); } static __inline int istdmaoui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((TDMA_OUI_TYPE<<24)|TDMA_OUI); } static __inline int ishtcapoui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((BCM_OUI_HTCAP<<24)|BCM_OUI); } static __inline int ishtinfooui(const uint8_t *frm) { return frm[1] > 3 && LE_READ_4(frm+2) == ((BCM_OUI_HTINFO<<24)|BCM_OUI); } #include /* For le16toh() */ /* * Check the current frame sequence number against the current TID * state and return whether it's in sequence or should be dropped. * * Since out of order packet and duplicate packet eliminations should * be done by the AMPDU RX code, this routine blindly accepts all * frames from a HT station w/ a TID that is currently doing AMPDU-RX. * HT stations without WME or where the TID is not doing AMPDU-RX * are checked like non-HT stations. * * The routine only eliminates packets whose sequence/fragment * match or are less than the last seen sequence/fragment number * AND are retransmits It doesn't try to eliminate out of order packets. * * Since all frames after sequence number 4095 will be less than 4095 * (as the seqnum wraps), handle that special case so packets aren't * incorrectly dropped - ie, if the next packet is sequence number 0 * but a retransmit since the initial packet didn't make it. */ static __inline int ieee80211_check_rxseq(struct ieee80211_node *ni, struct ieee80211_frame *wh) { #define SEQ_LEQ(a,b) ((int)((a)-(b)) <= 0) #define SEQ_EQ(a,b) ((int)((a)-(b)) == 0) -#define HAS_SEQ(type) ((type & 0x4) == 0) #define SEQNO(a) ((a) >> IEEE80211_SEQ_SEQ_SHIFT) #define FRAGNO(a) ((a) & IEEE80211_SEQ_FRAG_MASK) uint16_t rxseq; - uint8_t type; + uint8_t type, subtype; uint8_t tid; struct ieee80211_rx_ampdu *rap; rxseq = le16toh(*(uint16_t *)wh->i_seq); type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; + subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; - /* Types with no sequence number are always treated valid */ - if (! HAS_SEQ(type)) + /* + * Types with no sequence number (or QoS (+)Null frames) + * are always treated valid. + */ + if (! IEEE80211_HAS_SEQ(type, subtype)) return 1; tid = ieee80211_gettid(wh); /* * Only do the HT AMPDU check for WME stations; non-WME HT stations * shouldn't exist outside of debugging. We should at least * handle that. */ if (tid < WME_NUM_TID) { rap = &ni->ni_rx_ampdu[tid]; /* HT nodes currently doing RX AMPDU are always valid */ if ((ni->ni_flags & IEEE80211_NODE_HT) && (rap->rxa_flags & IEEE80211_AGGR_RUNNING)) return 1; } /* * Otherwise, retries for packets below or equal to the last * seen sequence number should be dropped. */ /* * Treat frame seqnum 4095 as special due to boundary * wrapping conditions. */ if (SEQNO(ni->ni_rxseqs[tid]) == 4095) { /* * Drop retransmits on seqnum 4095/current fragment for itself. */ if (SEQ_EQ(rxseq, ni->ni_rxseqs[tid]) && (wh->i_fc[1] & IEEE80211_FC1_RETRY)) return 0; /* * Treat any subsequent frame as fine if the last seen frame * is 4095 and it's not a retransmit for the same sequence * number. However, this doesn't capture incorrectly ordered * fragments w/ sequence number 4095. It shouldn't be seen * in practice, but see the comment above for further info. */ return 1; } /* * At this point we assume that retransmitted seq/frag numbers below * the current can simply be eliminated. */ if ((wh->i_fc[1] & IEEE80211_FC1_RETRY) && SEQ_LEQ(rxseq, ni->ni_rxseqs[tid])) return 0; return 1; #undef SEQ_LEQ #undef SEQ_EQ -#undef HAS_SEQ #undef SEQNO #undef FRAGNO } void ieee80211_deliver_data(struct ieee80211vap *, struct ieee80211_node *, struct mbuf *); struct mbuf *ieee80211_defrag(struct ieee80211_node *, struct mbuf *, int); struct mbuf *ieee80211_realign(struct ieee80211vap *, struct mbuf *, size_t); struct mbuf *ieee80211_decap(struct ieee80211vap *, struct mbuf *, int); struct mbuf *ieee80211_decap1(struct mbuf *, int *); int ieee80211_setup_rates(struct ieee80211_node *ni, const uint8_t *rates, const uint8_t *xrates, int flags); void ieee80211_send_error(struct ieee80211_node *, const uint8_t mac[IEEE80211_ADDR_LEN], int subtype, int arg); int ieee80211_alloc_challenge(struct ieee80211_node *); int ieee80211_parse_beacon(struct ieee80211_node *, struct mbuf *, struct ieee80211_scanparams *); int ieee80211_parse_action(struct ieee80211_node *, struct mbuf *); #endif /* _NET80211_IEEE80211_INPUT_H_ */ Index: head/sys/net80211/ieee80211_output.c =================================================================== --- head/sys/net80211/ieee80211_output.c (revision 282819) +++ head/sys/net80211/ieee80211_output.c (revision 282820) @@ -1,3437 +1,3442 @@ /*- * Copyright (c) 2001 Atsushi Onoe * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_inet.h" #include "opt_inet6.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif #ifdef IEEE80211_SUPPORT_TDMA #include #endif #include #include #if defined(INET) || defined(INET6) #include #endif #ifdef INET #include #include #include #endif #ifdef INET6 #include #endif #include #define ETHER_HEADER_COPY(dst, src) \ memcpy(dst, src, sizeof(struct ether_header)) /* unalligned little endian access */ #define LE_WRITE_2(p, v) do { \ ((uint8_t *)(p))[0] = (v) & 0xff; \ ((uint8_t *)(p))[1] = ((v) >> 8) & 0xff; \ } while (0) #define LE_WRITE_4(p, v) do { \ ((uint8_t *)(p))[0] = (v) & 0xff; \ ((uint8_t *)(p))[1] = ((v) >> 8) & 0xff; \ ((uint8_t *)(p))[2] = ((v) >> 16) & 0xff; \ ((uint8_t *)(p))[3] = ((v) >> 24) & 0xff; \ } while (0) static int ieee80211_fragment(struct ieee80211vap *, struct mbuf *, u_int hdrsize, u_int ciphdrsize, u_int mtu); static void ieee80211_tx_mgt_cb(struct ieee80211_node *, void *, int); #ifdef IEEE80211_DEBUG /* * Decide if an outbound management frame should be * printed when debugging is enabled. This filters some * of the less interesting frames that come frequently * (e.g. beacons). */ static __inline int doprint(struct ieee80211vap *vap, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_PROBE_RESP: return (vap->iv_opmode == IEEE80211_M_IBSS); } return 1; } #endif /* * Transmit a frame to the given destination on the given VAP. * * It's up to the caller to figure out the details of who this * is going to and resolving the node. * * This routine takes care of queuing it for power save, * A-MPDU state stuff, fast-frames state stuff, encapsulation * if required, then passing it up to the driver layer. * * This routine (for now) consumes the mbuf and frees the node * reference; it ideally will return a TX status which reflects * whether the mbuf was consumed or not, so the caller can * free the mbuf (if appropriate) and the node reference (again, * if appropriate.) */ int ieee80211_vap_pkt_send_dest(struct ieee80211vap *vap, struct mbuf *m, struct ieee80211_node *ni) { struct ieee80211com *ic = vap->iv_ic; struct ifnet *ifp = vap->iv_ifp; int error; if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && (m->m_flags & M_PWR_SAV) == 0) { /* * Station in power save mode; pass the frame * to the 802.11 layer and continue. We'll get * the frame back when the time is right. * XXX lose WDS vap linkage? */ (void) ieee80211_pwrsave(ni, m); ieee80211_free_node(ni); /* * We queued it fine, so tell the upper layer * that we consumed it. */ return (0); } /* calculate priority so drivers can find the tx queue */ if (ieee80211_classify(ni, m)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT, ni->ni_macaddr, NULL, "%s", "classification failure"); vap->iv_stats.is_tx_classify++; if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); m_freem(m); ieee80211_free_node(ni); /* XXX better status? */ return (0); } /* * Stash the node pointer. Note that we do this after * any call to ieee80211_dwds_mcast because that code * uses any existing value for rcvif to identify the * interface it (might have been) received on. */ m->m_pkthdr.rcvif = (void *)ni; BPF_MTAP(ifp, m); /* 802.3 tx */ /* * Check if A-MPDU tx aggregation is setup or if we * should try to enable it. The sta must be associated * with HT and A-MPDU enabled for use. When the policy * routine decides we should enable A-MPDU we issue an * ADDBA request and wait for a reply. The frame being * encapsulated will go out w/o using A-MPDU, or possibly * it might be collected by the driver and held/retransmit. * The default ic_ampdu_enable routine handles staggering * ADDBA requests in case the receiver NAK's us or we are * otherwise unable to establish a BA stream. */ if ((ni->ni_flags & IEEE80211_NODE_AMPDU_TX) && (vap->iv_flags_ht & IEEE80211_FHT_AMPDU_TX) && (m->m_flags & M_EAPOL) == 0) { int tid = WME_AC_TO_TID(M_WME_GETAC(m)); struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[tid]; ieee80211_txampdu_count_packet(tap); if (IEEE80211_AMPDU_RUNNING(tap)) { /* * Operational, mark frame for aggregation. * * XXX do tx aggregation here */ m->m_flags |= M_AMPDU_MPDU; } else if (!IEEE80211_AMPDU_REQUESTED(tap) && ic->ic_ampdu_enable(ni, tap)) { /* * Not negotiated yet, request service. */ ieee80211_ampdu_request(ni, tap); /* XXX hold frame for reply? */ } } #ifdef IEEE80211_SUPPORT_SUPERG else if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF)) { m = ieee80211_ff_check(ni, m); if (m == NULL) { /* NB: any ni ref held on stageq */ return (0); } } #endif /* IEEE80211_SUPPORT_SUPERG */ /* * Grab the TX lock - serialise the TX process from this * point (where TX state is being checked/modified) * through to driver queue. */ IEEE80211_TX_LOCK(ic); if (__predict_true((vap->iv_caps & IEEE80211_C_8023ENCAP) == 0)) { /* * Encapsulate the packet in prep for transmission. */ m = ieee80211_encap(vap, ni, m); if (m == NULL) { /* NB: stat+msg handled in ieee80211_encap */ IEEE80211_TX_UNLOCK(ic); ieee80211_free_node(ni); /* XXX better status? */ return (ENOBUFS); } } error = ieee80211_parent_xmitpkt(ic, m); /* * Unlock at this point - no need to hold it across * ieee80211_free_node() (ie, the comlock) */ IEEE80211_TX_UNLOCK(ic); if (error != 0) { /* NB: IFQ_HANDOFF reclaims mbuf */ ieee80211_free_node(ni); } else { if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); } ic->ic_lastdata = ticks; return (0); } /* * Send the given mbuf through the given vap. * * This consumes the mbuf regardless of whether the transmit * was successful or not. * * This does none of the initial checks that ieee80211_start() * does (eg CAC timeout, interface wakeup) - the caller must * do this first. */ static int ieee80211_start_pkt(struct ieee80211vap *vap, struct mbuf *m) { #define IS_DWDS(vap) \ (vap->iv_opmode == IEEE80211_M_WDS && \ (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) == 0) struct ieee80211com *ic = vap->iv_ic; struct ifnet *ifp = vap->iv_ifp; struct ieee80211_node *ni; struct ether_header *eh; /* * Cancel any background scan. */ if (ic->ic_flags & IEEE80211_F_SCAN) ieee80211_cancel_anyscan(vap); /* * Find the node for the destination so we can do * things like power save and fast frames aggregation. * * NB: past this point various code assumes the first * mbuf has the 802.3 header present (and contiguous). */ ni = NULL; if (m->m_len < sizeof(struct ether_header) && (m = m_pullup(m, sizeof(struct ether_header))) == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "discard frame, %s\n", "m_pullup failed"); vap->iv_stats.is_tx_nobuf++; /* XXX */ if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); return (ENOBUFS); } eh = mtod(m, struct ether_header *); if (ETHER_IS_MULTICAST(eh->ether_dhost)) { if (IS_DWDS(vap)) { /* * Only unicast frames from the above go out * DWDS vaps; multicast frames are handled by * dispatching the frame as it comes through * the AP vap (see below). */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_WDS, eh->ether_dhost, "mcast", "%s", "on DWDS"); vap->iv_stats.is_dwds_mcast++; m_freem(m); /* XXX better status? */ return (ENOBUFS); } if (vap->iv_opmode == IEEE80211_M_HOSTAP) { /* * Spam DWDS vap's w/ multicast traffic. */ /* XXX only if dwds in use? */ ieee80211_dwds_mcast(vap, m); } } #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode != IEEE80211_M_MBSS) { #endif ni = ieee80211_find_txnode(vap, eh->ether_dhost); if (ni == NULL) { /* NB: ieee80211_find_txnode does stat+msg */ if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); m_freem(m); /* XXX better status? */ return (ENOBUFS); } if (ni->ni_associd == 0 && (ni->ni_flags & IEEE80211_NODE_ASSOCID)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT, eh->ether_dhost, NULL, "sta not associated (type 0x%04x)", htons(eh->ether_type)); vap->iv_stats.is_tx_notassoc++; if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); m_freem(m); ieee80211_free_node(ni); /* XXX better status? */ return (ENOBUFS); } #ifdef IEEE80211_SUPPORT_MESH } else { if (!IEEE80211_ADDR_EQ(eh->ether_shost, vap->iv_myaddr)) { /* * Proxy station only if configured. */ if (!ieee80211_mesh_isproxyena(vap)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_MESH, eh->ether_dhost, NULL, "%s", "proxy not enabled"); vap->iv_stats.is_mesh_notproxy++; if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); m_freem(m); /* XXX better status? */ return (ENOBUFS); } IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "forward frame from DS SA(%6D), DA(%6D)\n", eh->ether_shost, ":", eh->ether_dhost, ":"); ieee80211_mesh_proxy_check(vap, eh->ether_shost); } ni = ieee80211_mesh_discover(vap, eh->ether_dhost, m); if (ni == NULL) { /* * NB: ieee80211_mesh_discover holds/disposes * frame (e.g. queueing on path discovery). */ if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); /* XXX better status? */ return (ENOBUFS); } } #endif /* * We've resolved the sender, so attempt to transmit it. */ if (vap->iv_state == IEEE80211_S_SLEEP) { /* * In power save; queue frame and then wakeup device * for transmit. */ ic->ic_lastdata = ticks; (void) ieee80211_pwrsave(ni, m); ieee80211_free_node(ni); ieee80211_new_state(vap, IEEE80211_S_RUN, 0); return (0); } if (ieee80211_vap_pkt_send_dest(vap, m, ni) != 0) return (ENOBUFS); return (0); #undef IS_DWDS } /* * Start method for vap's. All packets from the stack come * through here. We handle common processing of the packets * before dispatching them to the underlying device. * * if_transmit() requires that the mbuf be consumed by this call * regardless of the return condition. */ int ieee80211_vap_transmit(struct ifnet *ifp, struct mbuf *m) { struct ieee80211vap *vap = ifp->if_softc; struct ieee80211com *ic = vap->iv_ic; struct ifnet *parent = ic->ic_ifp; /* NB: parent must be up and running */ if (!IFNET_IS_UP_RUNNING(parent)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: ignore queue, parent %s not up+running\n", __func__, parent->if_xname); /* XXX stat */ m_freem(m); return (EINVAL); } /* * No data frames go out unless we're running. * Note in particular this covers CAC and CSA * states (though maybe we should check muting * for CSA). */ if (vap->iv_state != IEEE80211_S_RUN && vap->iv_state != IEEE80211_S_SLEEP) { IEEE80211_LOCK(ic); /* re-check under the com lock to avoid races */ if (vap->iv_state != IEEE80211_S_RUN && vap->iv_state != IEEE80211_S_SLEEP) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: ignore queue, in %s state\n", __func__, ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_tx_badstate++; IEEE80211_UNLOCK(ic); ifp->if_drv_flags |= IFF_DRV_OACTIVE; m_freem(m); return (EINVAL); } IEEE80211_UNLOCK(ic); } /* * Sanitize mbuf flags for net80211 use. We cannot * clear M_PWR_SAV or M_MORE_DATA because these may * be set for frames that are re-submitted from the * power save queue. * * NB: This must be done before ieee80211_classify as * it marks EAPOL in frames with M_EAPOL. */ m->m_flags &= ~(M_80211_TX - M_PWR_SAV - M_MORE_DATA); /* * Bump to the packet transmission path. * The mbuf will be consumed here. */ return (ieee80211_start_pkt(vap, m)); } void ieee80211_vap_qflush(struct ifnet *ifp) { /* Empty for now */ } /* * 802.11 raw output routine. * * XXX TODO: this (and other send routines) should correctly * XXX keep the pwr mgmt bit set if it decides to call into the * XXX driver to send a frame whilst the state is SLEEP. * * Otherwise the peer may decide that we're awake and flood us * with traffic we are still too asleep to receive! */ int ieee80211_raw_output(struct ieee80211vap *vap, struct ieee80211_node *ni, struct mbuf *m, const struct ieee80211_bpf_params *params) { struct ieee80211com *ic = vap->iv_ic; return (ic->ic_raw_xmit(ni, m, params)); } /* * 802.11 output routine. This is (currently) used only to * connect bpf write calls to the 802.11 layer for injecting * raw 802.11 frames. */ #if __FreeBSD_version >= 1000031 int ieee80211_output(struct ifnet *ifp, struct mbuf *m, const struct sockaddr *dst, struct route *ro) #else int ieee80211_output(struct ifnet *ifp, struct mbuf *m, struct sockaddr *dst, struct route *ro) #endif { #define senderr(e) do { error = (e); goto bad;} while (0) struct ieee80211_node *ni = NULL; struct ieee80211vap *vap; struct ieee80211_frame *wh; struct ieee80211com *ic = NULL; int error; int ret; if (ifp->if_drv_flags & IFF_DRV_OACTIVE) { /* * Short-circuit requests if the vap is marked OACTIVE * as this can happen because a packet came down through * ieee80211_start before the vap entered RUN state in * which case it's ok to just drop the frame. This * should not be necessary but callers of if_output don't * check OACTIVE. */ senderr(ENETDOWN); } vap = ifp->if_softc; ic = vap->iv_ic; /* * Hand to the 802.3 code if not tagged as * a raw 802.11 frame. */ if (dst->sa_family != AF_IEEE80211) return vap->iv_output(ifp, m, dst, ro); #ifdef MAC error = mac_ifnet_check_transmit(ifp, m); if (error) senderr(error); #endif if (ifp->if_flags & IFF_MONITOR) senderr(ENETDOWN); if (!IFNET_IS_UP_RUNNING(ifp)) senderr(ENETDOWN); if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, "block %s frame in CAC state\n", "raw data"); vap->iv_stats.is_tx_badstate++; senderr(EIO); /* XXX */ } else if (vap->iv_state == IEEE80211_S_SCAN) senderr(EIO); /* XXX bypass bridge, pfil, carp, etc. */ if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_ack)) senderr(EIO); /* XXX */ wh = mtod(m, struct ieee80211_frame *); if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) senderr(EIO); /* XXX */ /* locate destination node */ switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) { case IEEE80211_FC1_DIR_NODS: case IEEE80211_FC1_DIR_FROMDS: ni = ieee80211_find_txnode(vap, wh->i_addr1); break; case IEEE80211_FC1_DIR_TODS: case IEEE80211_FC1_DIR_DSTODS: if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) senderr(EIO); /* XXX */ ni = ieee80211_find_txnode(vap, wh->i_addr3); break; default: senderr(EIO); /* XXX */ } if (ni == NULL) { /* * Permit packets w/ bpf params through regardless * (see below about sa_len). */ if (dst->sa_len == 0) senderr(EHOSTUNREACH); ni = ieee80211_ref_node(vap->iv_bss); } /* * Sanitize mbuf for net80211 flags leaked from above. * * NB: This must be done before ieee80211_classify as * it marks EAPOL in frames with M_EAPOL. */ m->m_flags &= ~M_80211_TX; /* calculate priority so drivers can find the tx queue */ /* XXX assumes an 802.3 frame */ if (ieee80211_classify(ni, m)) senderr(EIO); /* XXX */ if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); IEEE80211_NODE_STAT(ni, tx_data); if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { IEEE80211_NODE_STAT(ni, tx_mcast); m->m_flags |= M_MCAST; } else IEEE80211_NODE_STAT(ni, tx_ucast); /* NB: ieee80211_encap does not include 802.11 header */ IEEE80211_NODE_STAT_ADD(ni, tx_bytes, m->m_pkthdr.len); IEEE80211_TX_LOCK(ic); /* * NB: DLT_IEEE802_11_RADIO identifies the parameters are * present by setting the sa_len field of the sockaddr (yes, * this is a hack). * NB: we assume sa_data is suitably aligned to cast. */ ret = ieee80211_raw_output(vap, ni, m, (const struct ieee80211_bpf_params *)(dst->sa_len ? dst->sa_data : NULL)); IEEE80211_TX_UNLOCK(ic); return (ret); bad: if (m != NULL) m_freem(m); if (ni != NULL) ieee80211_free_node(ni); if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); return error; #undef senderr } /* * Set the direction field and address fields of an outgoing * frame. Note this should be called early on in constructing * a frame as it sets i_fc[1]; other bits can then be or'd in. */ void ieee80211_send_setup( struct ieee80211_node *ni, struct mbuf *m, int type, int tid, const uint8_t sa[IEEE80211_ADDR_LEN], const uint8_t da[IEEE80211_ADDR_LEN], const uint8_t bssid[IEEE80211_ADDR_LEN]) { #define WH4(wh) ((struct ieee80211_frame_addr4 *)wh) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_tx_ampdu *tap; struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *); ieee80211_seq seqno; IEEE80211_TX_LOCK_ASSERT(ni->ni_ic); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | type; if ((type & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_DATA) { switch (vap->iv_opmode) { case IEEE80211_M_STA: wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; IEEE80211_ADDR_COPY(wh->i_addr1, bssid); IEEE80211_ADDR_COPY(wh->i_addr2, sa); IEEE80211_ADDR_COPY(wh->i_addr3, da); break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, sa); IEEE80211_ADDR_COPY(wh->i_addr3, bssid); break; case IEEE80211_M_HOSTAP: wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, bssid); IEEE80211_ADDR_COPY(wh->i_addr3, sa); break; case IEEE80211_M_WDS: wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, da); IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, sa); break; case IEEE80211_M_MBSS: #ifdef IEEE80211_SUPPORT_MESH if (IEEE80211_IS_MULTICAST(da)) { wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; /* XXX next hop */ IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); } else { wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, da); IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, sa); } #endif break; case IEEE80211_M_MONITOR: /* NB: to quiet compiler */ break; } } else { wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, da); IEEE80211_ADDR_COPY(wh->i_addr2, sa); #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) IEEE80211_ADDR_COPY(wh->i_addr3, sa); else #endif IEEE80211_ADDR_COPY(wh->i_addr3, bssid); } *(uint16_t *)&wh->i_dur[0] = 0; tap = &ni->ni_tx_ampdu[tid]; if (tid != IEEE80211_NONQOS_TID && IEEE80211_AMPDU_RUNNING(tap)) m->m_flags |= M_AMPDU_MPDU; else { - seqno = ni->ni_txseqs[tid]++; + if (IEEE80211_HAS_SEQ(type & IEEE80211_FC0_TYPE_MASK, + type & IEEE80211_FC0_SUBTYPE_MASK)) + seqno = ni->ni_txseqs[tid]++; + else + seqno = 0; + *(uint16_t *)&wh->i_seq[0] = htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); M_SEQNO_SET(m, seqno); } if (IEEE80211_IS_MULTICAST(wh->i_addr1)) m->m_flags |= M_MCAST; #undef WH4 } /* * Send a management frame to the specified node. The node pointer * must have a reference as the pointer will be passed to the driver * and potentially held for a long time. If the frame is successfully * dispatched to the driver, then it is responsible for freeing the * reference (and potentially free'ing up any associated storage); * otherwise deal with reclaiming any reference (on error). */ int ieee80211_mgmt_output(struct ieee80211_node *ni, struct mbuf *m, int type, struct ieee80211_bpf_params *params) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; int ret; KASSERT(ni != NULL, ("null node")); if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, ni, "block %s frame in CAC state", ieee80211_mgt_subtype_name[ (type & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT]); vap->iv_stats.is_tx_badstate++; ieee80211_free_node(ni); m_freem(m); return EIO; /* XXX */ } M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); if (m == NULL) { ieee80211_free_node(ni); return ENOMEM; } IEEE80211_TX_LOCK(ic); wh = mtod(m, struct ieee80211_frame *); ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_MGT | type, IEEE80211_NONQOS_TID, vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); if (params->ibp_flags & IEEE80211_BPF_CRYPTO) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_AUTH, wh->i_addr1, "encrypting frame (%s)", __func__); wh->i_fc[1] |= IEEE80211_FC1_PROTECTED; } m->m_flags |= M_ENCAP; /* mark encapsulated */ KASSERT(type != IEEE80211_FC0_SUBTYPE_PROBE_RESP, ("probe response?")); M_WME_SETAC(m, params->ibp_pri); #ifdef IEEE80211_DEBUG /* avoid printing too many frames */ if ((ieee80211_msg_debug(vap) && doprint(vap, type)) || ieee80211_msg_dumppkts(vap)) { printf("[%s] send %s on channel %u\n", ether_sprintf(wh->i_addr1), ieee80211_mgt_subtype_name[ (type & IEEE80211_FC0_SUBTYPE_MASK) >> IEEE80211_FC0_SUBTYPE_SHIFT], ieee80211_chan2ieee(ic, ic->ic_curchan)); } #endif IEEE80211_NODE_STAT(ni, tx_mgmt); ret = ieee80211_raw_output(vap, ni, m, params); IEEE80211_TX_UNLOCK(ic); return (ret); } /* * Send a null data frame to the specified node. If the station * is setup for QoS then a QoS Null Data frame is constructed. * If this is a WDS station then a 4-address frame is constructed. * * NB: the caller is assumed to have setup a node reference * for use; this is necessary to deal with a race condition * when probing for inactive stations. Like ieee80211_mgmt_output * we must cleanup any node reference on error; however we * can safely just unref it as we know it will never be the * last reference to the node. */ int ieee80211_send_nulldata(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct mbuf *m; struct ieee80211_frame *wh; int hdrlen; uint8_t *frm; int ret; if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, ni, "block %s frame in CAC state", "null data"); ieee80211_unref_node(&ni); vap->iv_stats.is_tx_badstate++; return EIO; /* XXX */ } if (ni->ni_flags & (IEEE80211_NODE_QOS|IEEE80211_NODE_HT)) hdrlen = sizeof(struct ieee80211_qosframe); else hdrlen = sizeof(struct ieee80211_frame); /* NB: only WDS vap's get 4-address frames */ if (vap->iv_opmode == IEEE80211_M_WDS) hdrlen += IEEE80211_ADDR_LEN; if (ic->ic_flags & IEEE80211_F_DATAPAD) hdrlen = roundup(hdrlen, sizeof(uint32_t)); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + hdrlen, 0); if (m == NULL) { /* XXX debug msg */ ieee80211_unref_node(&ni); vap->iv_stats.is_tx_nobuf++; return ENOMEM; } KASSERT(M_LEADINGSPACE(m) >= hdrlen, ("leading space %zd", M_LEADINGSPACE(m))); M_PREPEND(m, hdrlen, M_NOWAIT); if (m == NULL) { /* NB: cannot happen */ ieee80211_free_node(ni); return ENOMEM; } IEEE80211_TX_LOCK(ic); wh = mtod(m, struct ieee80211_frame *); /* NB: a little lie */ if (ni->ni_flags & IEEE80211_NODE_QOS) { const int tid = WME_AC_TO_TID(WME_AC_BE); uint8_t *qos; ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS_NULL, tid, vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); if (vap->iv_opmode == IEEE80211_M_WDS) qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; else qos = ((struct ieee80211_qosframe *) wh)->i_qos; qos[0] = tid & IEEE80211_QOS_TID; if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[WME_AC_BE].wmep_noackPolicy) qos[0] |= IEEE80211_QOS_ACKPOLICY_NOACK; qos[1] = 0; } else { ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_NODATA, IEEE80211_NONQOS_TID, vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); } if (vap->iv_opmode != IEEE80211_M_WDS) { /* NB: power management bit is never sent by an AP */ if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && vap->iv_opmode != IEEE80211_M_HOSTAP) wh->i_fc[1] |= IEEE80211_FC1_PWR_MGT; } m->m_len = m->m_pkthdr.len = hdrlen; m->m_flags |= M_ENCAP; /* mark encapsulated */ M_WME_SETAC(m, WME_AC_BE); IEEE80211_NODE_STAT(ni, tx_data); IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, ni, "send %snull data frame on channel %u, pwr mgt %s", ni->ni_flags & IEEE80211_NODE_QOS ? "QoS " : "", ieee80211_chan2ieee(ic, ic->ic_curchan), wh->i_fc[1] & IEEE80211_FC1_PWR_MGT ? "ena" : "dis"); ret = ieee80211_raw_output(vap, ni, m, NULL); IEEE80211_TX_UNLOCK(ic); return (ret); } /* * Assign priority to a frame based on any vlan tag assigned * to the station and/or any Diffserv setting in an IP header. * Finally, if an ACM policy is setup (in station mode) it's * applied. */ int ieee80211_classify(struct ieee80211_node *ni, struct mbuf *m) { const struct ether_header *eh = mtod(m, struct ether_header *); int v_wme_ac, d_wme_ac, ac; /* * Always promote PAE/EAPOL frames to high priority. */ if (eh->ether_type == htons(ETHERTYPE_PAE)) { /* NB: mark so others don't need to check header */ m->m_flags |= M_EAPOL; ac = WME_AC_VO; goto done; } /* * Non-qos traffic goes to BE. */ if ((ni->ni_flags & IEEE80211_NODE_QOS) == 0) { ac = WME_AC_BE; goto done; } /* * If node has a vlan tag then all traffic * to it must have a matching tag. */ v_wme_ac = 0; if (ni->ni_vlan != 0) { if ((m->m_flags & M_VLANTAG) == 0) { IEEE80211_NODE_STAT(ni, tx_novlantag); return 1; } if (EVL_VLANOFTAG(m->m_pkthdr.ether_vtag) != EVL_VLANOFTAG(ni->ni_vlan)) { IEEE80211_NODE_STAT(ni, tx_vlanmismatch); return 1; } /* map vlan priority to AC */ v_wme_ac = TID_TO_WME_AC(EVL_PRIOFTAG(ni->ni_vlan)); } /* XXX m_copydata may be too slow for fast path */ #ifdef INET if (eh->ether_type == htons(ETHERTYPE_IP)) { uint8_t tos; /* * IP frame, map the DSCP bits from the TOS field. */ /* NB: ip header may not be in first mbuf */ m_copydata(m, sizeof(struct ether_header) + offsetof(struct ip, ip_tos), sizeof(tos), &tos); tos >>= 5; /* NB: ECN + low 3 bits of DSCP */ d_wme_ac = TID_TO_WME_AC(tos); } else { #endif /* INET */ #ifdef INET6 if (eh->ether_type == htons(ETHERTYPE_IPV6)) { uint32_t flow; uint8_t tos; /* * IPv6 frame, map the DSCP bits from the traffic class field. */ m_copydata(m, sizeof(struct ether_header) + offsetof(struct ip6_hdr, ip6_flow), sizeof(flow), (caddr_t) &flow); tos = (uint8_t)(ntohl(flow) >> 20); tos >>= 5; /* NB: ECN + low 3 bits of DSCP */ d_wme_ac = TID_TO_WME_AC(tos); } else { #endif /* INET6 */ d_wme_ac = WME_AC_BE; #ifdef INET6 } #endif #ifdef INET } #endif /* * Use highest priority AC. */ if (v_wme_ac > d_wme_ac) ac = v_wme_ac; else ac = d_wme_ac; /* * Apply ACM policy. */ if (ni->ni_vap->iv_opmode == IEEE80211_M_STA) { static const int acmap[4] = { WME_AC_BK, /* WME_AC_BE */ WME_AC_BK, /* WME_AC_BK */ WME_AC_BE, /* WME_AC_VI */ WME_AC_VI, /* WME_AC_VO */ }; struct ieee80211com *ic = ni->ni_ic; while (ac != WME_AC_BK && ic->ic_wme.wme_wmeBssChanParams.cap_wmeParams[ac].wmep_acm) ac = acmap[ac]; } done: M_WME_SETAC(m, ac); return 0; } /* * Insure there is sufficient contiguous space to encapsulate the * 802.11 data frame. If room isn't already there, arrange for it. * Drivers and cipher modules assume we have done the necessary work * and fail rudely if they don't find the space they need. */ struct mbuf * ieee80211_mbuf_adjust(struct ieee80211vap *vap, int hdrsize, struct ieee80211_key *key, struct mbuf *m) { #define TO_BE_RECLAIMED (sizeof(struct ether_header) - sizeof(struct llc)) int needed_space = vap->iv_ic->ic_headroom + hdrsize; if (key != NULL) { /* XXX belongs in crypto code? */ needed_space += key->wk_cipher->ic_header; /* XXX frags */ /* * When crypto is being done in the host we must insure * the data are writable for the cipher routines; clone * a writable mbuf chain. * XXX handle SWMIC specially */ if (key->wk_flags & (IEEE80211_KEY_SWENCRYPT|IEEE80211_KEY_SWENMIC)) { m = m_unshare(m, M_NOWAIT); if (m == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: cannot get writable mbuf\n", __func__); vap->iv_stats.is_tx_nobuf++; /* XXX new stat */ return NULL; } } } /* * We know we are called just before stripping an Ethernet * header and prepending an LLC header. This means we know * there will be * sizeof(struct ether_header) - sizeof(struct llc) * bytes recovered to which we need additional space for the * 802.11 header and any crypto header. */ /* XXX check trailing space and copy instead? */ if (M_LEADINGSPACE(m) < needed_space - TO_BE_RECLAIMED) { struct mbuf *n = m_gethdr(M_NOWAIT, m->m_type); if (n == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, "%s: cannot expand storage\n", __func__); vap->iv_stats.is_tx_nobuf++; m_freem(m); return NULL; } KASSERT(needed_space <= MHLEN, ("not enough room, need %u got %d\n", needed_space, MHLEN)); /* * Setup new mbuf to have leading space to prepend the * 802.11 header and any crypto header bits that are * required (the latter are added when the driver calls * back to ieee80211_crypto_encap to do crypto encapsulation). */ /* NB: must be first 'cuz it clobbers m_data */ m_move_pkthdr(n, m); n->m_len = 0; /* NB: m_gethdr does not set */ n->m_data += needed_space; /* * Pull up Ethernet header to create the expected layout. * We could use m_pullup but that's overkill (i.e. we don't * need the actual data) and it cannot fail so do it inline * for speed. */ /* NB: struct ether_header is known to be contiguous */ n->m_len += sizeof(struct ether_header); m->m_len -= sizeof(struct ether_header); m->m_data += sizeof(struct ether_header); /* * Replace the head of the chain. */ n->m_next = m; m = n; } return m; #undef TO_BE_RECLAIMED } /* * Return the transmit key to use in sending a unicast frame. * If a unicast key is set we use that. When no unicast key is set * we fall back to the default transmit key. */ static __inline struct ieee80211_key * ieee80211_crypto_getucastkey(struct ieee80211vap *vap, struct ieee80211_node *ni) { if (IEEE80211_KEY_UNDEFINED(&ni->ni_ucastkey)) { if (vap->iv_def_txkey == IEEE80211_KEYIX_NONE || IEEE80211_KEY_UNDEFINED(&vap->iv_nw_keys[vap->iv_def_txkey])) return NULL; return &vap->iv_nw_keys[vap->iv_def_txkey]; } else { return &ni->ni_ucastkey; } } /* * Return the transmit key to use in sending a multicast frame. * Multicast traffic always uses the group key which is installed as * the default tx key. */ static __inline struct ieee80211_key * ieee80211_crypto_getmcastkey(struct ieee80211vap *vap, struct ieee80211_node *ni) { if (vap->iv_def_txkey == IEEE80211_KEYIX_NONE || IEEE80211_KEY_UNDEFINED(&vap->iv_nw_keys[vap->iv_def_txkey])) return NULL; return &vap->iv_nw_keys[vap->iv_def_txkey]; } /* * Encapsulate an outbound data frame. The mbuf chain is updated. * If an error is encountered NULL is returned. The caller is required * to provide a node reference and pullup the ethernet header in the * first mbuf. * * NB: Packet is assumed to be processed by ieee80211_classify which * marked EAPOL frames w/ M_EAPOL. */ struct mbuf * ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni, struct mbuf *m) { #define WH4(wh) ((struct ieee80211_frame_addr4 *)(wh)) #define MC01(mc) ((struct ieee80211_meshcntl_ae01 *)mc) struct ieee80211com *ic = ni->ni_ic; #ifdef IEEE80211_SUPPORT_MESH struct ieee80211_mesh_state *ms = vap->iv_mesh; struct ieee80211_meshcntl_ae10 *mc; struct ieee80211_mesh_route *rt = NULL; int dir = -1; #endif struct ether_header eh; struct ieee80211_frame *wh; struct ieee80211_key *key; struct llc *llc; int hdrsize, hdrspace, datalen, addqos, txfrag, is4addr; ieee80211_seq seqno; int meshhdrsize, meshae; uint8_t *qos; IEEE80211_TX_LOCK_ASSERT(ic); /* * Copy existing Ethernet header to a safe place. The * rest of the code assumes it's ok to strip it when * reorganizing state for the final encapsulation. */ KASSERT(m->m_len >= sizeof(eh), ("no ethernet header!")); ETHER_HEADER_COPY(&eh, mtod(m, caddr_t)); /* * Insure space for additional headers. First identify * transmit key to use in calculating any buffer adjustments * required. This is also used below to do privacy * encapsulation work. Then calculate the 802.11 header * size and any padding required by the driver. * * Note key may be NULL if we fall back to the default * transmit key and that is not set. In that case the * buffer may not be expanded as needed by the cipher * routines, but they will/should discard it. */ if (vap->iv_flags & IEEE80211_F_PRIVACY) { if (vap->iv_opmode == IEEE80211_M_STA || !IEEE80211_IS_MULTICAST(eh.ether_dhost) || (vap->iv_opmode == IEEE80211_M_WDS && (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY))) key = ieee80211_crypto_getucastkey(vap, ni); else key = ieee80211_crypto_getmcastkey(vap, ni); if (key == NULL && (m->m_flags & M_EAPOL) == 0) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_CRYPTO, eh.ether_dhost, "no default transmit key (%s) deftxkey %u", __func__, vap->iv_def_txkey); vap->iv_stats.is_tx_nodefkey++; goto bad; } } else key = NULL; /* * XXX Some ap's don't handle QoS-encapsulated EAPOL * frames so suppress use. This may be an issue if other * ap's require all data frames to be QoS-encapsulated * once negotiated in which case we'll need to make this * configurable. * NB: mesh data frames are QoS. */ addqos = ((ni->ni_flags & (IEEE80211_NODE_QOS|IEEE80211_NODE_HT)) || (vap->iv_opmode == IEEE80211_M_MBSS)) && (m->m_flags & M_EAPOL) == 0; if (addqos) hdrsize = sizeof(struct ieee80211_qosframe); else hdrsize = sizeof(struct ieee80211_frame); #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) { /* * Mesh data frames are encapsulated according to the * rules of Section 11B.8.5 (p.139 of D3.0 spec). * o Group Addressed data (aka multicast) originating * at the local sta are sent w/ 3-address format and * address extension mode 00 * o Individually Addressed data (aka unicast) originating * at the local sta are sent w/ 4-address format and * address extension mode 00 * o Group Addressed data forwarded from a non-mesh sta are * sent w/ 3-address format and address extension mode 01 * o Individually Address data from another sta are sent * w/ 4-address format and address extension mode 10 */ is4addr = 0; /* NB: don't use, disable */ if (!IEEE80211_IS_MULTICAST(eh.ether_dhost)) { rt = ieee80211_mesh_rt_find(vap, eh.ether_dhost); KASSERT(rt != NULL, ("route is NULL")); dir = IEEE80211_FC1_DIR_DSTODS; hdrsize += IEEE80211_ADDR_LEN; if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY) { if (IEEE80211_ADDR_EQ(rt->rt_mesh_gate, vap->iv_myaddr)) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_MESH, eh.ether_dhost, "%s", "trying to send to ourself"); goto bad; } meshae = IEEE80211_MESH_AE_10; meshhdrsize = sizeof(struct ieee80211_meshcntl_ae10); } else { meshae = IEEE80211_MESH_AE_00; meshhdrsize = sizeof(struct ieee80211_meshcntl); } } else { dir = IEEE80211_FC1_DIR_FROMDS; if (!IEEE80211_ADDR_EQ(eh.ether_shost, vap->iv_myaddr)) { /* proxy group */ meshae = IEEE80211_MESH_AE_01; meshhdrsize = sizeof(struct ieee80211_meshcntl_ae01); } else { /* group */ meshae = IEEE80211_MESH_AE_00; meshhdrsize = sizeof(struct ieee80211_meshcntl); } } } else { #endif /* * 4-address frames need to be generated for: * o packets sent through a WDS vap (IEEE80211_M_WDS) * o packets sent through a vap marked for relaying * (e.g. a station operating with dynamic WDS) */ is4addr = vap->iv_opmode == IEEE80211_M_WDS || ((vap->iv_flags_ext & IEEE80211_FEXT_4ADDR) && !IEEE80211_ADDR_EQ(eh.ether_shost, vap->iv_myaddr)); if (is4addr) hdrsize += IEEE80211_ADDR_LEN; meshhdrsize = meshae = 0; #ifdef IEEE80211_SUPPORT_MESH } #endif /* * Honor driver DATAPAD requirement. */ if (ic->ic_flags & IEEE80211_F_DATAPAD) hdrspace = roundup(hdrsize, sizeof(uint32_t)); else hdrspace = hdrsize; if (__predict_true((m->m_flags & M_FF) == 0)) { /* * Normal frame. */ m = ieee80211_mbuf_adjust(vap, hdrspace + meshhdrsize, key, m); if (m == NULL) { /* NB: ieee80211_mbuf_adjust handles msgs+statistics */ goto bad; } /* NB: this could be optimized 'cuz of ieee80211_mbuf_adjust */ m_adj(m, sizeof(struct ether_header) - sizeof(struct llc)); llc = mtod(m, struct llc *); llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP; llc->llc_control = LLC_UI; llc->llc_snap.org_code[0] = 0; llc->llc_snap.org_code[1] = 0; llc->llc_snap.org_code[2] = 0; llc->llc_snap.ether_type = eh.ether_type; } else { #ifdef IEEE80211_SUPPORT_SUPERG /* * Aggregated frame. */ m = ieee80211_ff_encap(vap, m, hdrspace + meshhdrsize, key); if (m == NULL) #endif goto bad; } datalen = m->m_pkthdr.len; /* NB: w/o 802.11 header */ M_PREPEND(m, hdrspace + meshhdrsize, M_NOWAIT); if (m == NULL) { vap->iv_stats.is_tx_nobuf++; goto bad; } wh = mtod(m, struct ieee80211_frame *); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA; *(uint16_t *)wh->i_dur = 0; qos = NULL; /* NB: quiet compiler */ if (is4addr) { wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, eh.ether_shost); } else switch (vap->iv_opmode) { case IEEE80211_M_STA: wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_bssid); IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); /* * NB: always use the bssid from iv_bss as the * neighbor's may be stale after an ibss merge */ IEEE80211_ADDR_COPY(wh->i_addr3, vap->iv_bss->ni_bssid); break; case IEEE80211_M_HOSTAP: wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr2, ni->ni_bssid); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost); break; #ifdef IEEE80211_SUPPORT_MESH case IEEE80211_M_MBSS: /* NB: offset by hdrspace to deal with DATAPAD */ mc = (struct ieee80211_meshcntl_ae10 *) (mtod(m, uint8_t *) + hdrspace); wh->i_fc[1] = dir; switch (meshae) { case IEEE80211_MESH_AE_00: /* no proxy */ mc->mc_flags = 0; if (dir == IEEE80211_FC1_DIR_DSTODS) { /* ucast */ IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, eh.ether_shost); qos =((struct ieee80211_qosframe_addr4 *) wh)->i_qos; } else if (dir == IEEE80211_FC1_DIR_FROMDS) { /* mcast */ IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost); qos = ((struct ieee80211_qosframe *) wh)->i_qos; } break; case IEEE80211_MESH_AE_01: /* mcast, proxy */ wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, vap->iv_myaddr); mc->mc_flags = 1; IEEE80211_ADDR_COPY(MC01(mc)->mc_addr4, eh.ether_shost); qos = ((struct ieee80211_qosframe *) wh)->i_qos; break; case IEEE80211_MESH_AE_10: /* ucast, proxy */ KASSERT(rt != NULL, ("route is NULL")); IEEE80211_ADDR_COPY(wh->i_addr1, rt->rt_nexthop); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, rt->rt_mesh_gate); IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, vap->iv_myaddr); mc->mc_flags = IEEE80211_MESH_AE_10; IEEE80211_ADDR_COPY(mc->mc_addr5, eh.ether_dhost); IEEE80211_ADDR_COPY(mc->mc_addr6, eh.ether_shost); qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; break; default: KASSERT(0, ("meshae %d", meshae)); break; } mc->mc_ttl = ms->ms_ttl; ms->ms_seq++; LE_WRITE_4(mc->mc_seq, ms->ms_seq); break; #endif case IEEE80211_M_WDS: /* NB: is4addr should always be true */ default: goto bad; } if (m->m_flags & M_MORE_DATA) wh->i_fc[1] |= IEEE80211_FC1_MORE_DATA; if (addqos) { int ac, tid; if (is4addr) { qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; /* NB: mesh case handled earlier */ } else if (vap->iv_opmode != IEEE80211_M_MBSS) qos = ((struct ieee80211_qosframe *) wh)->i_qos; ac = M_WME_GETAC(m); /* map from access class/queue to 11e header priorty value */ tid = WME_AC_TO_TID(ac); qos[0] = tid & IEEE80211_QOS_TID; if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[ac].wmep_noackPolicy) qos[0] |= IEEE80211_QOS_ACKPOLICY_NOACK; #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) qos[1] = IEEE80211_QOS_MC; else #endif qos[1] = 0; wh->i_fc[0] |= IEEE80211_FC0_SUBTYPE_QOS; if ((m->m_flags & M_AMPDU_MPDU) == 0) { /* * NB: don't assign a sequence # to potential * aggregates; we expect this happens at the * point the frame comes off any aggregation q * as otherwise we may introduce holes in the * BA sequence space and/or make window accouting * more difficult. * * XXX may want to control this with a driver * capability; this may also change when we pull * aggregation up into net80211 */ seqno = ni->ni_txseqs[tid]++; *(uint16_t *)wh->i_seq = htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); M_SEQNO_SET(m, seqno); } } else { seqno = ni->ni_txseqs[IEEE80211_NONQOS_TID]++; *(uint16_t *)wh->i_seq = htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); M_SEQNO_SET(m, seqno); } /* check if xmit fragmentation is required */ txfrag = (m->m_pkthdr.len > vap->iv_fragthreshold && !IEEE80211_IS_MULTICAST(wh->i_addr1) && (vap->iv_caps & IEEE80211_C_TXFRAG) && (m->m_flags & (M_FF | M_AMPDU_MPDU)) == 0); if (key != NULL) { /* * IEEE 802.1X: send EAPOL frames always in the clear. * WPA/WPA2: encrypt EAPOL keys when pairwise keys are set. */ if ((m->m_flags & M_EAPOL) == 0 || ((vap->iv_flags & IEEE80211_F_WPA) && (vap->iv_opmode == IEEE80211_M_STA ? !IEEE80211_KEY_UNDEFINED(key) : !IEEE80211_KEY_UNDEFINED(&ni->ni_ucastkey)))) { wh->i_fc[1] |= IEEE80211_FC1_PROTECTED; if (!ieee80211_crypto_enmic(vap, key, m, txfrag)) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, eh.ether_dhost, "%s", "enmic failed, discard frame"); vap->iv_stats.is_crypto_enmicfail++; goto bad; } } } if (txfrag && !ieee80211_fragment(vap, m, hdrsize, key != NULL ? key->wk_cipher->ic_header : 0, vap->iv_fragthreshold)) goto bad; m->m_flags |= M_ENCAP; /* mark encapsulated */ IEEE80211_NODE_STAT(ni, tx_data); if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { IEEE80211_NODE_STAT(ni, tx_mcast); m->m_flags |= M_MCAST; } else IEEE80211_NODE_STAT(ni, tx_ucast); IEEE80211_NODE_STAT_ADD(ni, tx_bytes, datalen); return m; bad: if (m != NULL) m_freem(m); return NULL; #undef WH4 #undef MC01 } /* * Fragment the frame according to the specified mtu. * The size of the 802.11 header (w/o padding) is provided * so we don't need to recalculate it. We create a new * mbuf for each fragment and chain it through m_nextpkt; * we might be able to optimize this by reusing the original * packet's mbufs but that is significantly more complicated. */ static int ieee80211_fragment(struct ieee80211vap *vap, struct mbuf *m0, u_int hdrsize, u_int ciphdrsize, u_int mtu) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_frame *wh, *whf; struct mbuf *m, *prev, *next; u_int totalhdrsize, fragno, fragsize, off, remainder, payload; u_int hdrspace; KASSERT(m0->m_nextpkt == NULL, ("mbuf already chained?")); KASSERT(m0->m_pkthdr.len > mtu, ("pktlen %u mtu %u", m0->m_pkthdr.len, mtu)); /* * Honor driver DATAPAD requirement. */ if (ic->ic_flags & IEEE80211_F_DATAPAD) hdrspace = roundup(hdrsize, sizeof(uint32_t)); else hdrspace = hdrsize; wh = mtod(m0, struct ieee80211_frame *); /* NB: mark the first frag; it will be propagated below */ wh->i_fc[1] |= IEEE80211_FC1_MORE_FRAG; totalhdrsize = hdrspace + ciphdrsize; fragno = 1; off = mtu - ciphdrsize; remainder = m0->m_pkthdr.len - off; prev = m0; do { fragsize = totalhdrsize + remainder; if (fragsize > mtu) fragsize = mtu; /* XXX fragsize can be >2048! */ KASSERT(fragsize < MCLBYTES, ("fragment size %u too big!", fragsize)); if (fragsize > MHLEN) m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); else m = m_gethdr(M_NOWAIT, MT_DATA); if (m == NULL) goto bad; /* leave room to prepend any cipher header */ m_align(m, fragsize - ciphdrsize); /* * Form the header in the fragment. Note that since * we mark the first fragment with the MORE_FRAG bit * it automatically is propagated to each fragment; we * need only clear it on the last fragment (done below). * NB: frag 1+ dont have Mesh Control field present. */ whf = mtod(m, struct ieee80211_frame *); memcpy(whf, wh, hdrsize); #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) { if (IEEE80211_IS_DSTODS(wh)) ((struct ieee80211_qosframe_addr4 *) whf)->i_qos[1] &= ~IEEE80211_QOS_MC; else ((struct ieee80211_qosframe *) whf)->i_qos[1] &= ~IEEE80211_QOS_MC; } #endif *(uint16_t *)&whf->i_seq[0] |= htole16( (fragno & IEEE80211_SEQ_FRAG_MASK) << IEEE80211_SEQ_FRAG_SHIFT); fragno++; payload = fragsize - totalhdrsize; /* NB: destination is known to be contiguous */ m_copydata(m0, off, payload, mtod(m, uint8_t *) + hdrspace); m->m_len = hdrspace + payload; m->m_pkthdr.len = hdrspace + payload; m->m_flags |= M_FRAG; /* chain up the fragment */ prev->m_nextpkt = m; prev = m; /* deduct fragment just formed */ remainder -= payload; off += payload; } while (remainder != 0); /* set the last fragment */ m->m_flags |= M_LASTFRAG; whf->i_fc[1] &= ~IEEE80211_FC1_MORE_FRAG; /* strip first mbuf now that everything has been copied */ m_adj(m0, -(m0->m_pkthdr.len - (mtu - ciphdrsize))); m0->m_flags |= M_FIRSTFRAG | M_FRAG; vap->iv_stats.is_tx_fragframes++; vap->iv_stats.is_tx_frags += fragno-1; return 1; bad: /* reclaim fragments but leave original frame for caller to free */ for (m = m0->m_nextpkt; m != NULL; m = next) { next = m->m_nextpkt; m->m_nextpkt = NULL; /* XXX paranoid */ m_freem(m); } m0->m_nextpkt = NULL; return 0; } /* * Add a supported rates element id to a frame. */ uint8_t * ieee80211_add_rates(uint8_t *frm, const struct ieee80211_rateset *rs) { int nrates; *frm++ = IEEE80211_ELEMID_RATES; nrates = rs->rs_nrates; if (nrates > IEEE80211_RATE_SIZE) nrates = IEEE80211_RATE_SIZE; *frm++ = nrates; memcpy(frm, rs->rs_rates, nrates); return frm + nrates; } /* * Add an extended supported rates element id to a frame. */ uint8_t * ieee80211_add_xrates(uint8_t *frm, const struct ieee80211_rateset *rs) { /* * Add an extended supported rates element if operating in 11g mode. */ if (rs->rs_nrates > IEEE80211_RATE_SIZE) { int nrates = rs->rs_nrates - IEEE80211_RATE_SIZE; *frm++ = IEEE80211_ELEMID_XRATES; *frm++ = nrates; memcpy(frm, rs->rs_rates + IEEE80211_RATE_SIZE, nrates); frm += nrates; } return frm; } /* * Add an ssid element to a frame. */ uint8_t * ieee80211_add_ssid(uint8_t *frm, const uint8_t *ssid, u_int len) { *frm++ = IEEE80211_ELEMID_SSID; *frm++ = len; memcpy(frm, ssid, len); return frm + len; } /* * Add an erp element to a frame. */ static uint8_t * ieee80211_add_erp(uint8_t *frm, struct ieee80211com *ic) { uint8_t erp; *frm++ = IEEE80211_ELEMID_ERP; *frm++ = 1; erp = 0; if (ic->ic_nonerpsta != 0) erp |= IEEE80211_ERP_NON_ERP_PRESENT; if (ic->ic_flags & IEEE80211_F_USEPROT) erp |= IEEE80211_ERP_USE_PROTECTION; if (ic->ic_flags & IEEE80211_F_USEBARKER) erp |= IEEE80211_ERP_LONG_PREAMBLE; *frm++ = erp; return frm; } /* * Add a CFParams element to a frame. */ static uint8_t * ieee80211_add_cfparms(uint8_t *frm, struct ieee80211com *ic) { #define ADDSHORT(frm, v) do { \ LE_WRITE_2(frm, v); \ frm += 2; \ } while (0) *frm++ = IEEE80211_ELEMID_CFPARMS; *frm++ = 6; *frm++ = 0; /* CFP count */ *frm++ = 2; /* CFP period */ ADDSHORT(frm, 0); /* CFP MaxDuration (TU) */ ADDSHORT(frm, 0); /* CFP CurRemaining (TU) */ return frm; #undef ADDSHORT } static __inline uint8_t * add_appie(uint8_t *frm, const struct ieee80211_appie *ie) { memcpy(frm, ie->ie_data, ie->ie_len); return frm + ie->ie_len; } static __inline uint8_t * add_ie(uint8_t *frm, const uint8_t *ie) { memcpy(frm, ie, 2 + ie[1]); return frm + 2 + ie[1]; } #define WME_OUI_BYTES 0x00, 0x50, 0xf2 /* * Add a WME information element to a frame. */ static uint8_t * ieee80211_add_wme_info(uint8_t *frm, struct ieee80211_wme_state *wme) { static const struct ieee80211_wme_info info = { .wme_id = IEEE80211_ELEMID_VENDOR, .wme_len = sizeof(struct ieee80211_wme_info) - 2, .wme_oui = { WME_OUI_BYTES }, .wme_type = WME_OUI_TYPE, .wme_subtype = WME_INFO_OUI_SUBTYPE, .wme_version = WME_VERSION, .wme_info = 0, }; memcpy(frm, &info, sizeof(info)); return frm + sizeof(info); } /* * Add a WME parameters element to a frame. */ static uint8_t * ieee80211_add_wme_param(uint8_t *frm, struct ieee80211_wme_state *wme) { #define SM(_v, _f) (((_v) << _f##_S) & _f) #define ADDSHORT(frm, v) do { \ LE_WRITE_2(frm, v); \ frm += 2; \ } while (0) /* NB: this works 'cuz a param has an info at the front */ static const struct ieee80211_wme_info param = { .wme_id = IEEE80211_ELEMID_VENDOR, .wme_len = sizeof(struct ieee80211_wme_param) - 2, .wme_oui = { WME_OUI_BYTES }, .wme_type = WME_OUI_TYPE, .wme_subtype = WME_PARAM_OUI_SUBTYPE, .wme_version = WME_VERSION, }; int i; memcpy(frm, ¶m, sizeof(param)); frm += __offsetof(struct ieee80211_wme_info, wme_info); *frm++ = wme->wme_bssChanParams.cap_info; /* AC info */ *frm++ = 0; /* reserved field */ for (i = 0; i < WME_NUM_AC; i++) { const struct wmeParams *ac = &wme->wme_bssChanParams.cap_wmeParams[i]; *frm++ = SM(i, WME_PARAM_ACI) | SM(ac->wmep_acm, WME_PARAM_ACM) | SM(ac->wmep_aifsn, WME_PARAM_AIFSN) ; *frm++ = SM(ac->wmep_logcwmax, WME_PARAM_LOGCWMAX) | SM(ac->wmep_logcwmin, WME_PARAM_LOGCWMIN) ; ADDSHORT(frm, ac->wmep_txopLimit); } return frm; #undef SM #undef ADDSHORT } #undef WME_OUI_BYTES /* * Add an 11h Power Constraint element to a frame. */ static uint8_t * ieee80211_add_powerconstraint(uint8_t *frm, struct ieee80211vap *vap) { const struct ieee80211_channel *c = vap->iv_bss->ni_chan; /* XXX per-vap tx power limit? */ int8_t limit = vap->iv_ic->ic_txpowlimit / 2; frm[0] = IEEE80211_ELEMID_PWRCNSTR; frm[1] = 1; frm[2] = c->ic_maxregpower > limit ? c->ic_maxregpower - limit : 0; return frm + 3; } /* * Add an 11h Power Capability element to a frame. */ static uint8_t * ieee80211_add_powercapability(uint8_t *frm, const struct ieee80211_channel *c) { frm[0] = IEEE80211_ELEMID_PWRCAP; frm[1] = 2; frm[2] = c->ic_minpower; frm[3] = c->ic_maxpower; return frm + 4; } /* * Add an 11h Supported Channels element to a frame. */ static uint8_t * ieee80211_add_supportedchannels(uint8_t *frm, struct ieee80211com *ic) { static const int ielen = 26; frm[0] = IEEE80211_ELEMID_SUPPCHAN; frm[1] = ielen; /* XXX not correct */ memcpy(frm+2, ic->ic_chan_avail, ielen); return frm + 2 + ielen; } /* * Add an 11h Quiet time element to a frame. */ static uint8_t * ieee80211_add_quiet(uint8_t *frm, struct ieee80211vap *vap) { struct ieee80211_quiet_ie *quiet = (struct ieee80211_quiet_ie *) frm; quiet->quiet_ie = IEEE80211_ELEMID_QUIET; quiet->len = 6; if (vap->iv_quiet_count_value == 1) vap->iv_quiet_count_value = vap->iv_quiet_count; else if (vap->iv_quiet_count_value > 1) vap->iv_quiet_count_value--; if (vap->iv_quiet_count_value == 0) { /* value 0 is reserved as per 802.11h standerd */ vap->iv_quiet_count_value = 1; } quiet->tbttcount = vap->iv_quiet_count_value; quiet->period = vap->iv_quiet_period; quiet->duration = htole16(vap->iv_quiet_duration); quiet->offset = htole16(vap->iv_quiet_offset); return frm + sizeof(*quiet); } /* * Add an 11h Channel Switch Announcement element to a frame. * Note that we use the per-vap CSA count to adjust the global * counter so we can use this routine to form probe response * frames and get the current count. */ static uint8_t * ieee80211_add_csa(uint8_t *frm, struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_csa_ie *csa = (struct ieee80211_csa_ie *) frm; csa->csa_ie = IEEE80211_ELEMID_CSA; csa->csa_len = 3; csa->csa_mode = 1; /* XXX force quiet on channel */ csa->csa_newchan = ieee80211_chan2ieee(ic, ic->ic_csa_newchan); csa->csa_count = ic->ic_csa_count - vap->iv_csa_count; return frm + sizeof(*csa); } /* * Add an 11h country information element to a frame. */ static uint8_t * ieee80211_add_countryie(uint8_t *frm, struct ieee80211com *ic) { if (ic->ic_countryie == NULL || ic->ic_countryie_chan != ic->ic_bsschan) { /* * Handle lazy construction of ie. This is done on * first use and after a channel change that requires * re-calculation. */ if (ic->ic_countryie != NULL) free(ic->ic_countryie, M_80211_NODE_IE); ic->ic_countryie = ieee80211_alloc_countryie(ic); if (ic->ic_countryie == NULL) return frm; ic->ic_countryie_chan = ic->ic_bsschan; } return add_appie(frm, ic->ic_countryie); } uint8_t * ieee80211_add_wpa(uint8_t *frm, const struct ieee80211vap *vap) { if (vap->iv_flags & IEEE80211_F_WPA1 && vap->iv_wpa_ie != NULL) return (add_ie(frm, vap->iv_wpa_ie)); else { /* XXX else complain? */ return (frm); } } uint8_t * ieee80211_add_rsn(uint8_t *frm, const struct ieee80211vap *vap) { if (vap->iv_flags & IEEE80211_F_WPA2 && vap->iv_rsn_ie != NULL) return (add_ie(frm, vap->iv_rsn_ie)); else { /* XXX else complain? */ return (frm); } } uint8_t * ieee80211_add_qos(uint8_t *frm, const struct ieee80211_node *ni) { if (ni->ni_flags & IEEE80211_NODE_QOS) { *frm++ = IEEE80211_ELEMID_QOS; *frm++ = 1; *frm++ = 0; } return (frm); } /* * Send a probe request frame with the specified ssid * and any optional information element data. */ int ieee80211_send_probereq(struct ieee80211_node *ni, const uint8_t sa[IEEE80211_ADDR_LEN], const uint8_t da[IEEE80211_ADDR_LEN], const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t *ssid, size_t ssidlen) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; const struct ieee80211_txparam *tp; struct ieee80211_bpf_params params; struct ieee80211_frame *wh; const struct ieee80211_rateset *rs; struct mbuf *m; uint8_t *frm; int ret; if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, ni, "block %s frame in CAC state", "probe request"); vap->iv_stats.is_tx_badstate++; return EIO; /* XXX */ } /* * Hold a reference on the node so it doesn't go away until after * the xmit is complete all the way in the driver. On error we * will remove our reference. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); ieee80211_ref_node(ni); /* * prreq frame format * [tlv] ssid * [tlv] supported rates * [tlv] RSN (optional) * [tlv] extended supported rates * [tlv] WPA (optional) * [tlv] user-specified ie's */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + sizeof(struct ieee80211_ie_wpa) + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + sizeof(struct ieee80211_ie_wpa) + (vap->iv_appie_probereq != NULL ? vap->iv_appie_probereq->ie_len : 0) ); if (m == NULL) { vap->iv_stats.is_tx_nobuf++; ieee80211_free_node(ni); return ENOMEM; } frm = ieee80211_add_ssid(frm, ssid, ssidlen); rs = ieee80211_get_suprates(ic, ic->ic_curchan); frm = ieee80211_add_rates(frm, rs); frm = ieee80211_add_rsn(frm, vap); frm = ieee80211_add_xrates(frm, rs); frm = ieee80211_add_wpa(frm, vap); if (vap->iv_appie_probereq != NULL) frm = add_appie(frm, vap->iv_appie_probereq); m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); KASSERT(M_LEADINGSPACE(m) >= sizeof(struct ieee80211_frame), ("leading space %zd", M_LEADINGSPACE(m))); M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); if (m == NULL) { /* NB: cannot happen */ ieee80211_free_node(ni); return ENOMEM; } IEEE80211_TX_LOCK(ic); wh = mtod(m, struct ieee80211_frame *); ieee80211_send_setup(ni, m, IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ, IEEE80211_NONQOS_TID, sa, da, bssid); /* XXX power management? */ m->m_flags |= M_ENCAP; /* mark encapsulated */ M_WME_SETAC(m, WME_AC_BE); IEEE80211_NODE_STAT(ni, tx_probereq); IEEE80211_NODE_STAT(ni, tx_mgmt); IEEE80211_DPRINTF(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, "send probe req on channel %u bssid %s ssid \"%.*s\"\n", ieee80211_chan2ieee(ic, ic->ic_curchan), ether_sprintf(bssid), ssidlen, ssid); memset(¶ms, 0, sizeof(params)); params.ibp_pri = M_WME_GETAC(m); tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; params.ibp_rate0 = tp->mgmtrate; if (IEEE80211_IS_MULTICAST(da)) { params.ibp_flags |= IEEE80211_BPF_NOACK; params.ibp_try0 = 1; } else params.ibp_try0 = tp->maxretry; params.ibp_power = ni->ni_txpower; ret = ieee80211_raw_output(vap, ni, m, ¶ms); IEEE80211_TX_UNLOCK(ic); return (ret); } /* * Calculate capability information for mgt frames. */ uint16_t ieee80211_getcapinfo(struct ieee80211vap *vap, struct ieee80211_channel *chan) { struct ieee80211com *ic = vap->iv_ic; uint16_t capinfo; KASSERT(vap->iv_opmode != IEEE80211_M_STA, ("station mode")); if (vap->iv_opmode == IEEE80211_M_HOSTAP) capinfo = IEEE80211_CAPINFO_ESS; else if (vap->iv_opmode == IEEE80211_M_IBSS) capinfo = IEEE80211_CAPINFO_IBSS; else capinfo = 0; if (vap->iv_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(chan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (ic->ic_flags & IEEE80211_F_SHSLOT) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; if (IEEE80211_IS_CHAN_5GHZ(chan) && (vap->iv_flags & IEEE80211_F_DOTH)) capinfo |= IEEE80211_CAPINFO_SPECTRUM_MGMT; return capinfo; } /* * Send a management frame. The node is for the destination (or ic_bss * when in station mode). Nodes other than ic_bss have their reference * count bumped to reflect our use for an indeterminant time. */ int ieee80211_send_mgmt(struct ieee80211_node *ni, int type, int arg) { #define HTFLAGS (IEEE80211_NODE_HT | IEEE80211_NODE_HTCOMPAT) #define senderr(_x, _v) do { vap->iv_stats._v++; ret = _x; goto bad; } while (0) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_node *bss = vap->iv_bss; struct ieee80211_bpf_params params; struct mbuf *m; uint8_t *frm; uint16_t capinfo; int has_challenge, is_shared_key, ret, status; KASSERT(ni != NULL, ("null node")); /* * Hold a reference on the node so it doesn't go away until after * the xmit is complete all the way in the driver. On error we * will remove our reference. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, ni, ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); ieee80211_ref_node(ni); memset(¶ms, 0, sizeof(params)); switch (type) { case IEEE80211_FC0_SUBTYPE_AUTH: status = arg >> 16; arg &= 0xffff; has_challenge = ((arg == IEEE80211_AUTH_SHARED_CHALLENGE || arg == IEEE80211_AUTH_SHARED_RESPONSE) && ni->ni_challenge != NULL); /* * Deduce whether we're doing open authentication or * shared key authentication. We do the latter if * we're in the middle of a shared key authentication * handshake or if we're initiating an authentication * request and configured to use shared key. */ is_shared_key = has_challenge || arg >= IEEE80211_AUTH_SHARED_RESPONSE || (arg == IEEE80211_AUTH_SHARED_REQUEST && bss->ni_authmode == IEEE80211_AUTH_SHARED); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), 3 * sizeof(uint16_t) + (has_challenge && status == IEEE80211_STATUS_SUCCESS ? sizeof(uint16_t)+IEEE80211_CHALLENGE_LEN : 0) ); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); ((uint16_t *)frm)[0] = (is_shared_key) ? htole16(IEEE80211_AUTH_ALG_SHARED) : htole16(IEEE80211_AUTH_ALG_OPEN); ((uint16_t *)frm)[1] = htole16(arg); /* sequence number */ ((uint16_t *)frm)[2] = htole16(status);/* status */ if (has_challenge && status == IEEE80211_STATUS_SUCCESS) { ((uint16_t *)frm)[3] = htole16((IEEE80211_CHALLENGE_LEN << 8) | IEEE80211_ELEMID_CHALLENGE); memcpy(&((uint16_t *)frm)[4], ni->ni_challenge, IEEE80211_CHALLENGE_LEN); m->m_pkthdr.len = m->m_len = 4 * sizeof(uint16_t) + IEEE80211_CHALLENGE_LEN; if (arg == IEEE80211_AUTH_SHARED_RESPONSE) { IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, "request encrypt frame (%s)", __func__); /* mark frame for encryption */ params.ibp_flags |= IEEE80211_BPF_CRYPTO; } } else m->m_pkthdr.len = m->m_len = 3 * sizeof(uint16_t); /* XXX not right for shared key */ if (status == IEEE80211_STATUS_SUCCESS) IEEE80211_NODE_STAT(ni, tx_auth); else IEEE80211_NODE_STAT(ni, tx_auth_fail); if (vap->iv_opmode == IEEE80211_M_STA) ieee80211_add_callback(m, ieee80211_tx_mgt_cb, (void *) vap->iv_state); break; case IEEE80211_FC0_SUBTYPE_DEAUTH: IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, "send station deauthenticate (reason %d)", arg); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t)); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); *(uint16_t *)frm = htole16(arg); /* reason */ m->m_pkthdr.len = m->m_len = sizeof(uint16_t); IEEE80211_NODE_STAT(ni, tx_deauth); IEEE80211_NODE_STAT_SET(ni, tx_deauth_code, arg); ieee80211_node_unauthorize(ni); /* port closed */ break; case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: /* * asreq frame format * [2] capability information * [2] listen interval * [6*] current AP address (reassoc only) * [tlv] ssid * [tlv] supported rates * [tlv] extended supported rates * [4] power capability (optional) * [28] supported channels (optional) * [tlv] HT capabilities * [tlv] WME (optional) * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Atheros capabilities (if negotiated) * [tlv] AppIE's (optional) */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t) + sizeof(uint16_t) + IEEE80211_ADDR_LEN + 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + 4 + 2 + 26 + sizeof(struct ieee80211_wme_info) + sizeof(struct ieee80211_ie_htcap) + 4 + sizeof(struct ieee80211_ie_htcap) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) #endif + (vap->iv_appie_wpa != NULL ? vap->iv_appie_wpa->ie_len : 0) + (vap->iv_appie_assocreq != NULL ? vap->iv_appie_assocreq->ie_len : 0) ); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); KASSERT(vap->iv_opmode == IEEE80211_M_STA, ("wrong mode %u", vap->iv_opmode)); capinfo = IEEE80211_CAPINFO_ESS; if (vap->iv_flags & IEEE80211_F_PRIVACY) capinfo |= IEEE80211_CAPINFO_PRIVACY; /* * NB: Some 11a AP's reject the request when * short premable is set. */ if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) && (ic->ic_caps & IEEE80211_C_SHSLOT)) capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; if ((ni->ni_capinfo & IEEE80211_CAPINFO_SPECTRUM_MGMT) && (vap->iv_flags & IEEE80211_F_DOTH)) capinfo |= IEEE80211_CAPINFO_SPECTRUM_MGMT; *(uint16_t *)frm = htole16(capinfo); frm += 2; KASSERT(bss->ni_intval != 0, ("beacon interval is zero!")); *(uint16_t *)frm = htole16(howmany(ic->ic_lintval, bss->ni_intval)); frm += 2; if (type == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) { IEEE80211_ADDR_COPY(frm, bss->ni_bssid); frm += IEEE80211_ADDR_LEN; } frm = ieee80211_add_ssid(frm, ni->ni_essid, ni->ni_esslen); frm = ieee80211_add_rates(frm, &ni->ni_rates); frm = ieee80211_add_rsn(frm, vap); frm = ieee80211_add_xrates(frm, &ni->ni_rates); if (capinfo & IEEE80211_CAPINFO_SPECTRUM_MGMT) { frm = ieee80211_add_powercapability(frm, ic->ic_curchan); frm = ieee80211_add_supportedchannels(frm, ic); } /* * Check the channel - we may be using an 11n NIC with an * 11n capable station, but we're configured to be an 11b * channel. */ if ((vap->iv_flags_ht & IEEE80211_FHT_HT) && IEEE80211_IS_CHAN_HT(ni->ni_chan) && ni->ni_ies.htcap_ie != NULL && ni->ni_ies.htcap_ie[0] == IEEE80211_ELEMID_HTCAP) { frm = ieee80211_add_htcap(frm, ni); } frm = ieee80211_add_wpa(frm, vap); if ((ic->ic_flags & IEEE80211_F_WME) && ni->ni_ies.wme_ie != NULL) frm = ieee80211_add_wme_info(frm, &ic->ic_wme); /* * Same deal - only send HT info if we're on an 11n * capable channel. */ if ((vap->iv_flags_ht & IEEE80211_FHT_HT) && IEEE80211_IS_CHAN_HT(ni->ni_chan) && ni->ni_ies.htcap_ie != NULL && ni->ni_ies.htcap_ie[0] == IEEE80211_ELEMID_VENDOR) { frm = ieee80211_add_htcap_vendor(frm, ni); } #ifdef IEEE80211_SUPPORT_SUPERG if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS)) { frm = ieee80211_add_ath(frm, IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS), ((vap->iv_flags & IEEE80211_F_WPA) == 0 && ni->ni_authmode != IEEE80211_AUTH_8021X) ? vap->iv_def_txkey : IEEE80211_KEYIX_NONE); } #endif /* IEEE80211_SUPPORT_SUPERG */ if (vap->iv_appie_assocreq != NULL) frm = add_appie(frm, vap->iv_appie_assocreq); m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); ieee80211_add_callback(m, ieee80211_tx_mgt_cb, (void *) vap->iv_state); break; case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: /* * asresp frame format * [2] capability information * [2] status * [2] association ID * [tlv] supported rates * [tlv] extended supported rates * [tlv] HT capabilities (standard, if STA enabled) * [tlv] HT information (standard, if STA enabled) * [tlv] WME (if configured and STA enabled) * [tlv] HT capabilities (vendor OUI, if STA enabled) * [tlv] HT information (vendor OUI, if STA enabled) * [tlv] Atheros capabilities (if STA enabled) * [tlv] AppIE's (optional) */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t) + sizeof(uint16_t) + sizeof(uint16_t) + 2 + IEEE80211_RATE_SIZE + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + sizeof(struct ieee80211_ie_htcap) + 4 + sizeof(struct ieee80211_ie_htinfo) + 4 + sizeof(struct ieee80211_wme_param) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) #endif + (vap->iv_appie_assocresp != NULL ? vap->iv_appie_assocresp->ie_len : 0) ); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); capinfo = ieee80211_getcapinfo(vap, bss->ni_chan); *(uint16_t *)frm = htole16(capinfo); frm += 2; *(uint16_t *)frm = htole16(arg); /* status */ frm += 2; if (arg == IEEE80211_STATUS_SUCCESS) { *(uint16_t *)frm = htole16(ni->ni_associd); IEEE80211_NODE_STAT(ni, tx_assoc); } else IEEE80211_NODE_STAT(ni, tx_assoc_fail); frm += 2; frm = ieee80211_add_rates(frm, &ni->ni_rates); frm = ieee80211_add_xrates(frm, &ni->ni_rates); /* NB: respond according to what we received */ if ((ni->ni_flags & HTFLAGS) == IEEE80211_NODE_HT) { frm = ieee80211_add_htcap(frm, ni); frm = ieee80211_add_htinfo(frm, ni); } if ((vap->iv_flags & IEEE80211_F_WME) && ni->ni_ies.wme_ie != NULL) frm = ieee80211_add_wme_param(frm, &ic->ic_wme); if ((ni->ni_flags & HTFLAGS) == HTFLAGS) { frm = ieee80211_add_htcap_vendor(frm, ni); frm = ieee80211_add_htinfo_vendor(frm, ni); } #ifdef IEEE80211_SUPPORT_SUPERG if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS)) frm = ieee80211_add_ath(frm, IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS), ((vap->iv_flags & IEEE80211_F_WPA) == 0 && ni->ni_authmode != IEEE80211_AUTH_8021X) ? vap->iv_def_txkey : IEEE80211_KEYIX_NONE); #endif /* IEEE80211_SUPPORT_SUPERG */ if (vap->iv_appie_assocresp != NULL) frm = add_appie(frm, vap->iv_appie_assocresp); m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); break; case IEEE80211_FC0_SUBTYPE_DISASSOC: IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni, "send station disassociate (reason %d)", arg); m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), sizeof(uint16_t)); if (m == NULL) senderr(ENOMEM, is_tx_nobuf); *(uint16_t *)frm = htole16(arg); /* reason */ m->m_pkthdr.len = m->m_len = sizeof(uint16_t); IEEE80211_NODE_STAT(ni, tx_disassoc); IEEE80211_NODE_STAT_SET(ni, tx_disassoc_code, arg); break; default: IEEE80211_NOTE(vap, IEEE80211_MSG_ANY, ni, "invalid mgmt frame type %u", type); senderr(EINVAL, is_tx_unknownmgt); /* NOTREACHED */ } /* NB: force non-ProbeResp frames to the highest queue */ params.ibp_pri = WME_AC_VO; params.ibp_rate0 = bss->ni_txparms->mgmtrate; /* NB: we know all frames are unicast */ params.ibp_try0 = bss->ni_txparms->maxretry; params.ibp_power = bss->ni_txpower; return ieee80211_mgmt_output(ni, m, type, ¶ms); bad: ieee80211_free_node(ni); return ret; #undef senderr #undef HTFLAGS } /* * Return an mbuf with a probe response frame in it. * Space is left to prepend and 802.11 header at the * front but it's left to the caller to fill in. */ struct mbuf * ieee80211_alloc_proberesp(struct ieee80211_node *bss, int legacy) { struct ieee80211vap *vap = bss->ni_vap; struct ieee80211com *ic = bss->ni_ic; const struct ieee80211_rateset *rs; struct mbuf *m; uint16_t capinfo; uint8_t *frm; /* * probe response frame format * [8] time stamp * [2] beacon interval * [2] cabability information * [tlv] ssid * [tlv] supported rates * [tlv] parameter set (FH/DS) * [tlv] parameter set (IBSS) * [tlv] country (optional) * [3] power control (optional) * [5] channel switch announcement (CSA) (optional) * [tlv] extended rate phy (ERP) * [tlv] extended supported rates * [tlv] RSN (optional) * [tlv] HT capabilities * [tlv] HT information * [tlv] WPA (optional) * [tlv] WME (optional) * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Vendor OUI HT information (optional) * [tlv] Atheros capabilities * [tlv] AppIE's (optional) * [tlv] Mesh ID (MBSS) * [tlv] Mesh Conf (MBSS) */ m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), 8 + sizeof(uint16_t) + sizeof(uint16_t) + 2 + IEEE80211_NWID_LEN + 2 + IEEE80211_RATE_SIZE + 7 /* max(7,3) */ + IEEE80211_COUNTRY_MAX_SIZE + 3 + sizeof(struct ieee80211_csa_ie) + sizeof(struct ieee80211_quiet_ie) + 3 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + sizeof(struct ieee80211_ie_wpa) + sizeof(struct ieee80211_ie_htcap) + sizeof(struct ieee80211_ie_htinfo) + sizeof(struct ieee80211_ie_wpa) + sizeof(struct ieee80211_wme_param) + 4 + sizeof(struct ieee80211_ie_htcap) + 4 + sizeof(struct ieee80211_ie_htinfo) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) #endif #ifdef IEEE80211_SUPPORT_MESH + 2 + IEEE80211_MESHID_LEN + sizeof(struct ieee80211_meshconf_ie) #endif + (vap->iv_appie_proberesp != NULL ? vap->iv_appie_proberesp->ie_len : 0) ); if (m == NULL) { vap->iv_stats.is_tx_nobuf++; return NULL; } memset(frm, 0, 8); /* timestamp should be filled later */ frm += 8; *(uint16_t *)frm = htole16(bss->ni_intval); frm += 2; capinfo = ieee80211_getcapinfo(vap, bss->ni_chan); *(uint16_t *)frm = htole16(capinfo); frm += 2; frm = ieee80211_add_ssid(frm, bss->ni_essid, bss->ni_esslen); rs = ieee80211_get_suprates(ic, bss->ni_chan); frm = ieee80211_add_rates(frm, rs); if (IEEE80211_IS_CHAN_FHSS(bss->ni_chan)) { *frm++ = IEEE80211_ELEMID_FHPARMS; *frm++ = 5; *frm++ = bss->ni_fhdwell & 0x00ff; *frm++ = (bss->ni_fhdwell >> 8) & 0x00ff; *frm++ = IEEE80211_FH_CHANSET( ieee80211_chan2ieee(ic, bss->ni_chan)); *frm++ = IEEE80211_FH_CHANPAT( ieee80211_chan2ieee(ic, bss->ni_chan)); *frm++ = bss->ni_fhindex; } else { *frm++ = IEEE80211_ELEMID_DSPARMS; *frm++ = 1; *frm++ = ieee80211_chan2ieee(ic, bss->ni_chan); } if (vap->iv_opmode == IEEE80211_M_IBSS) { *frm++ = IEEE80211_ELEMID_IBSSPARMS; *frm++ = 2; *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ } if ((vap->iv_flags & IEEE80211_F_DOTH) || (vap->iv_flags_ext & IEEE80211_FEXT_DOTD)) frm = ieee80211_add_countryie(frm, ic); if (vap->iv_flags & IEEE80211_F_DOTH) { if (IEEE80211_IS_CHAN_5GHZ(bss->ni_chan)) frm = ieee80211_add_powerconstraint(frm, vap); if (ic->ic_flags & IEEE80211_F_CSAPENDING) frm = ieee80211_add_csa(frm, vap); } if (vap->iv_flags & IEEE80211_F_DOTH) { if (IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) && (vap->iv_flags_ext & IEEE80211_FEXT_DFS)) { if (vap->iv_quiet) frm = ieee80211_add_quiet(frm, vap); } } if (IEEE80211_IS_CHAN_ANYG(bss->ni_chan)) frm = ieee80211_add_erp(frm, ic); frm = ieee80211_add_xrates(frm, rs); frm = ieee80211_add_rsn(frm, vap); /* * NB: legacy 11b clients do not get certain ie's. * The caller identifies such clients by passing * a token in legacy to us. Could expand this to be * any legacy client for stuff like HT ie's. */ if (IEEE80211_IS_CHAN_HT(bss->ni_chan) && legacy != IEEE80211_SEND_LEGACY_11B) { frm = ieee80211_add_htcap(frm, bss); frm = ieee80211_add_htinfo(frm, bss); } frm = ieee80211_add_wpa(frm, vap); if (vap->iv_flags & IEEE80211_F_WME) frm = ieee80211_add_wme_param(frm, &ic->ic_wme); if (IEEE80211_IS_CHAN_HT(bss->ni_chan) && (vap->iv_flags_ht & IEEE80211_FHT_HTCOMPAT) && legacy != IEEE80211_SEND_LEGACY_11B) { frm = ieee80211_add_htcap_vendor(frm, bss); frm = ieee80211_add_htinfo_vendor(frm, bss); } #ifdef IEEE80211_SUPPORT_SUPERG if ((vap->iv_flags & IEEE80211_F_ATHEROS) && legacy != IEEE80211_SEND_LEGACY_11B) frm = ieee80211_add_athcaps(frm, bss); #endif if (vap->iv_appie_proberesp != NULL) frm = add_appie(frm, vap->iv_appie_proberesp); #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) { frm = ieee80211_add_meshid(frm, vap); frm = ieee80211_add_meshconf(frm, vap); } #endif m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); return m; } /* * Send a probe response frame to the specified mac address. * This does not go through the normal mgt frame api so we * can specify the destination address and re-use the bss node * for the sta reference. */ int ieee80211_send_proberesp(struct ieee80211vap *vap, const uint8_t da[IEEE80211_ADDR_LEN], int legacy) { struct ieee80211_node *bss = vap->iv_bss; struct ieee80211com *ic = vap->iv_ic; struct ieee80211_frame *wh; struct mbuf *m; int ret; if (vap->iv_state == IEEE80211_S_CAC) { IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, bss, "block %s frame in CAC state", "probe response"); vap->iv_stats.is_tx_badstate++; return EIO; /* XXX */ } /* * Hold a reference on the node so it doesn't go away until after * the xmit is complete all the way in the driver. On error we * will remove our reference. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", __func__, __LINE__, bss, ether_sprintf(bss->ni_macaddr), ieee80211_node_refcnt(bss)+1); ieee80211_ref_node(bss); m = ieee80211_alloc_proberesp(bss, legacy); if (m == NULL) { ieee80211_free_node(bss); return ENOMEM; } M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); KASSERT(m != NULL, ("no room for header")); IEEE80211_TX_LOCK(ic); wh = mtod(m, struct ieee80211_frame *); ieee80211_send_setup(bss, m, IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP, IEEE80211_NONQOS_TID, vap->iv_myaddr, da, bss->ni_bssid); /* XXX power management? */ m->m_flags |= M_ENCAP; /* mark encapsulated */ M_WME_SETAC(m, WME_AC_BE); IEEE80211_DPRINTF(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, "send probe resp on channel %u to %s%s\n", ieee80211_chan2ieee(ic, ic->ic_curchan), ether_sprintf(da), legacy ? " " : ""); IEEE80211_NODE_STAT(bss, tx_mgmt); ret = ieee80211_raw_output(vap, bss, m, NULL); IEEE80211_TX_UNLOCK(ic); return (ret); } /* * Allocate and build a RTS (Request To Send) control frame. */ struct mbuf * ieee80211_alloc_rts(struct ieee80211com *ic, const uint8_t ra[IEEE80211_ADDR_LEN], const uint8_t ta[IEEE80211_ADDR_LEN], uint16_t dur) { struct ieee80211_frame_rts *rts; struct mbuf *m; /* XXX honor ic_headroom */ m = m_gethdr(M_NOWAIT, MT_DATA); if (m != NULL) { rts = mtod(m, struct ieee80211_frame_rts *); rts->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_RTS; rts->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)rts->i_dur = htole16(dur); IEEE80211_ADDR_COPY(rts->i_ra, ra); IEEE80211_ADDR_COPY(rts->i_ta, ta); m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_rts); } return m; } /* * Allocate and build a CTS (Clear To Send) control frame. */ struct mbuf * ieee80211_alloc_cts(struct ieee80211com *ic, const uint8_t ra[IEEE80211_ADDR_LEN], uint16_t dur) { struct ieee80211_frame_cts *cts; struct mbuf *m; /* XXX honor ic_headroom */ m = m_gethdr(M_NOWAIT, MT_DATA); if (m != NULL) { cts = mtod(m, struct ieee80211_frame_cts *); cts->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_CTS; cts->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(u_int16_t *)cts->i_dur = htole16(dur); IEEE80211_ADDR_COPY(cts->i_ra, ra); m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_cts); } return m; } static void ieee80211_tx_mgt_timeout(void *arg) { struct ieee80211vap *vap = arg; IEEE80211_LOCK(vap->iv_ic); if (vap->iv_state != IEEE80211_S_INIT && (vap->iv_ic->ic_flags & IEEE80211_F_SCAN) == 0) { /* * NB: it's safe to specify a timeout as the reason here; * it'll only be used in the right state. */ ieee80211_new_state_locked(vap, IEEE80211_S_SCAN, IEEE80211_SCAN_FAIL_TIMEOUT); } IEEE80211_UNLOCK(vap->iv_ic); } /* * This is the callback set on net80211-sourced transmitted * authentication request frames. * * This does a couple of things: * * + If the frame transmitted was a success, it schedules a future * event which will transition the interface to scan. * If a state transition _then_ occurs before that event occurs, * said state transition will cancel this callout. * * + If the frame transmit was a failure, it immediately schedules * the transition back to scan. */ static void ieee80211_tx_mgt_cb(struct ieee80211_node *ni, void *arg, int status) { struct ieee80211vap *vap = ni->ni_vap; enum ieee80211_state ostate = (enum ieee80211_state) arg; /* * Frame transmit completed; arrange timer callback. If * transmit was successfuly we wait for response. Otherwise * we arrange an immediate callback instead of doing the * callback directly since we don't know what state the driver * is in (e.g. what locks it is holding). This work should * not be too time-critical and not happen too often so the * added overhead is acceptable. * * XXX what happens if !acked but response shows up before callback? */ if (vap->iv_state == ostate) { callout_reset(&vap->iv_mgtsend, status == 0 ? IEEE80211_TRANS_WAIT*hz : 0, ieee80211_tx_mgt_timeout, vap); } } static void ieee80211_beacon_construct(struct mbuf *m, uint8_t *frm, struct ieee80211_beacon_offsets *bo, struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_rateset *rs = &ni->ni_rates; uint16_t capinfo; /* * beacon frame format * [8] time stamp * [2] beacon interval * [2] cabability information * [tlv] ssid * [tlv] supported rates * [3] parameter set (DS) * [8] CF parameter set (optional) * [tlv] parameter set (IBSS/TIM) * [tlv] country (optional) * [3] power control (optional) * [5] channel switch announcement (CSA) (optional) * [tlv] extended rate phy (ERP) * [tlv] extended supported rates * [tlv] RSN parameters * [tlv] HT capabilities * [tlv] HT information * XXX Vendor-specific OIDs (e.g. Atheros) * [tlv] WPA parameters * [tlv] WME parameters * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Vendor OUI HT information (optional) * [tlv] Atheros capabilities (optional) * [tlv] TDMA parameters (optional) * [tlv] Mesh ID (MBSS) * [tlv] Mesh Conf (MBSS) * [tlv] application data (optional) */ memset(bo, 0, sizeof(*bo)); memset(frm, 0, 8); /* XXX timestamp is set by hardware/driver */ frm += 8; *(uint16_t *)frm = htole16(ni->ni_intval); frm += 2; capinfo = ieee80211_getcapinfo(vap, ni->ni_chan); bo->bo_caps = (uint16_t *)frm; *(uint16_t *)frm = htole16(capinfo); frm += 2; *frm++ = IEEE80211_ELEMID_SSID; if ((vap->iv_flags & IEEE80211_F_HIDESSID) == 0) { *frm++ = ni->ni_esslen; memcpy(frm, ni->ni_essid, ni->ni_esslen); frm += ni->ni_esslen; } else *frm++ = 0; frm = ieee80211_add_rates(frm, rs); if (!IEEE80211_IS_CHAN_FHSS(ni->ni_chan)) { *frm++ = IEEE80211_ELEMID_DSPARMS; *frm++ = 1; *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan); } if (ic->ic_flags & IEEE80211_F_PCF) { bo->bo_cfp = frm; frm = ieee80211_add_cfparms(frm, ic); } bo->bo_tim = frm; if (vap->iv_opmode == IEEE80211_M_IBSS) { *frm++ = IEEE80211_ELEMID_IBSSPARMS; *frm++ = 2; *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ bo->bo_tim_len = 0; } else if (vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_MBSS) { /* TIM IE is the same for Mesh and Hostap */ struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) frm; tie->tim_ie = IEEE80211_ELEMID_TIM; tie->tim_len = 4; /* length */ tie->tim_count = 0; /* DTIM count */ tie->tim_period = vap->iv_dtim_period; /* DTIM period */ tie->tim_bitctl = 0; /* bitmap control */ tie->tim_bitmap[0] = 0; /* Partial Virtual Bitmap */ frm += sizeof(struct ieee80211_tim_ie); bo->bo_tim_len = 1; } bo->bo_tim_trailer = frm; if ((vap->iv_flags & IEEE80211_F_DOTH) || (vap->iv_flags_ext & IEEE80211_FEXT_DOTD)) frm = ieee80211_add_countryie(frm, ic); if (vap->iv_flags & IEEE80211_F_DOTH) { if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan)) frm = ieee80211_add_powerconstraint(frm, vap); bo->bo_csa = frm; if (ic->ic_flags & IEEE80211_F_CSAPENDING) frm = ieee80211_add_csa(frm, vap); } else bo->bo_csa = frm; if (vap->iv_flags & IEEE80211_F_DOTH) { bo->bo_quiet = frm; if (IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) && (vap->iv_flags_ext & IEEE80211_FEXT_DFS)) { if (vap->iv_quiet) frm = ieee80211_add_quiet(frm,vap); } } else bo->bo_quiet = frm; if (IEEE80211_IS_CHAN_ANYG(ni->ni_chan)) { bo->bo_erp = frm; frm = ieee80211_add_erp(frm, ic); } frm = ieee80211_add_xrates(frm, rs); frm = ieee80211_add_rsn(frm, vap); if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) { frm = ieee80211_add_htcap(frm, ni); bo->bo_htinfo = frm; frm = ieee80211_add_htinfo(frm, ni); } frm = ieee80211_add_wpa(frm, vap); if (vap->iv_flags & IEEE80211_F_WME) { bo->bo_wme = frm; frm = ieee80211_add_wme_param(frm, &ic->ic_wme); } if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && (vap->iv_flags_ht & IEEE80211_FHT_HTCOMPAT)) { frm = ieee80211_add_htcap_vendor(frm, ni); frm = ieee80211_add_htinfo_vendor(frm, ni); } #ifdef IEEE80211_SUPPORT_SUPERG if (vap->iv_flags & IEEE80211_F_ATHEROS) { bo->bo_ath = frm; frm = ieee80211_add_athcaps(frm, ni); } #endif #ifdef IEEE80211_SUPPORT_TDMA if (vap->iv_caps & IEEE80211_C_TDMA) { bo->bo_tdma = frm; frm = ieee80211_add_tdma(frm, vap); } #endif if (vap->iv_appie_beacon != NULL) { bo->bo_appie = frm; bo->bo_appie_len = vap->iv_appie_beacon->ie_len; frm = add_appie(frm, vap->iv_appie_beacon); } #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) { frm = ieee80211_add_meshid(frm, vap); bo->bo_meshconf = frm; frm = ieee80211_add_meshconf(frm, vap); } #endif bo->bo_tim_trailer_len = frm - bo->bo_tim_trailer; bo->bo_csa_trailer_len = frm - bo->bo_csa; m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); } /* * Allocate a beacon frame and fillin the appropriate bits. */ struct mbuf * ieee80211_beacon_alloc(struct ieee80211_node *ni, struct ieee80211_beacon_offsets *bo) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ifnet *ifp = vap->iv_ifp; struct ieee80211_frame *wh; struct mbuf *m; int pktlen; uint8_t *frm; /* * beacon frame format * [8] time stamp * [2] beacon interval * [2] cabability information * [tlv] ssid * [tlv] supported rates * [3] parameter set (DS) * [8] CF parameter set (optional) * [tlv] parameter set (IBSS/TIM) * [tlv] country (optional) * [3] power control (optional) * [5] channel switch announcement (CSA) (optional) * [tlv] extended rate phy (ERP) * [tlv] extended supported rates * [tlv] RSN parameters * [tlv] HT capabilities * [tlv] HT information * [tlv] Vendor OUI HT capabilities (optional) * [tlv] Vendor OUI HT information (optional) * XXX Vendor-specific OIDs (e.g. Atheros) * [tlv] WPA parameters * [tlv] WME parameters * [tlv] TDMA parameters (optional) * [tlv] Mesh ID (MBSS) * [tlv] Mesh Conf (MBSS) * [tlv] application data (optional) * NB: we allocate the max space required for the TIM bitmap. * XXX how big is this? */ pktlen = 8 /* time stamp */ + sizeof(uint16_t) /* beacon interval */ + sizeof(uint16_t) /* capabilities */ + 2 + ni->ni_esslen /* ssid */ + 2 + IEEE80211_RATE_SIZE /* supported rates */ + 2 + 1 /* DS parameters */ + 2 + 6 /* CF parameters */ + 2 + 4 + vap->iv_tim_len /* DTIM/IBSSPARMS */ + IEEE80211_COUNTRY_MAX_SIZE /* country */ + 2 + 1 /* power control */ + sizeof(struct ieee80211_csa_ie) /* CSA */ + sizeof(struct ieee80211_quiet_ie) /* Quiet */ + 2 + 1 /* ERP */ + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) + (vap->iv_caps & IEEE80211_C_WPA ? /* WPA 1+2 */ 2*sizeof(struct ieee80211_ie_wpa) : 0) /* XXX conditional? */ + 4+2*sizeof(struct ieee80211_ie_htcap)/* HT caps */ + 4+2*sizeof(struct ieee80211_ie_htinfo)/* HT info */ + (vap->iv_caps & IEEE80211_C_WME ? /* WME */ sizeof(struct ieee80211_wme_param) : 0) #ifdef IEEE80211_SUPPORT_SUPERG + sizeof(struct ieee80211_ath_ie) /* ATH */ #endif #ifdef IEEE80211_SUPPORT_TDMA + (vap->iv_caps & IEEE80211_C_TDMA ? /* TDMA */ sizeof(struct ieee80211_tdma_param) : 0) #endif #ifdef IEEE80211_SUPPORT_MESH + 2 + ni->ni_meshidlen + sizeof(struct ieee80211_meshconf_ie) #endif + IEEE80211_MAX_APPIE ; m = ieee80211_getmgtframe(&frm, ic->ic_headroom + sizeof(struct ieee80211_frame), pktlen); if (m == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_ANY, "%s: cannot get buf; size %u\n", __func__, pktlen); vap->iv_stats.is_tx_nobuf++; return NULL; } ieee80211_beacon_construct(m, frm, bo, ni); M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); KASSERT(m != NULL, ("no space for 802.11 header?")); wh = mtod(m, struct ieee80211_frame *); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON; wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; *(uint16_t *)wh->i_dur = 0; IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid); *(uint16_t *)wh->i_seq = 0; return m; } /* * Update the dynamic parts of a beacon frame based on the current state. */ int ieee80211_beacon_update(struct ieee80211_node *ni, struct ieee80211_beacon_offsets *bo, struct mbuf *m, int mcast) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; int len_changed = 0; uint16_t capinfo; struct ieee80211_frame *wh; ieee80211_seq seqno; IEEE80211_LOCK(ic); /* * Handle 11h channel change when we've reached the count. * We must recalculate the beacon frame contents to account * for the new channel. Note we do this only for the first * vap that reaches this point; subsequent vaps just update * their beacon state to reflect the recalculated channel. */ if (isset(bo->bo_flags, IEEE80211_BEACON_CSA) && vap->iv_csa_count == ic->ic_csa_count) { vap->iv_csa_count = 0; /* * Effect channel change before reconstructing the beacon * frame contents as many places reference ni_chan. */ if (ic->ic_csa_newchan != NULL) ieee80211_csa_completeswitch(ic); /* * NB: ieee80211_beacon_construct clears all pending * updates in bo_flags so we don't need to explicitly * clear IEEE80211_BEACON_CSA. */ ieee80211_beacon_construct(m, mtod(m, uint8_t*) + sizeof(struct ieee80211_frame), bo, ni); /* XXX do WME aggressive mode processing? */ IEEE80211_UNLOCK(ic); return 1; /* just assume length changed */ } wh = mtod(m, struct ieee80211_frame *); seqno = ni->ni_txseqs[IEEE80211_NONQOS_TID]++; *(uint16_t *)&wh->i_seq[0] = htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); M_SEQNO_SET(m, seqno); /* XXX faster to recalculate entirely or just changes? */ capinfo = ieee80211_getcapinfo(vap, ni->ni_chan); *bo->bo_caps = htole16(capinfo); if (vap->iv_flags & IEEE80211_F_WME) { struct ieee80211_wme_state *wme = &ic->ic_wme; /* * Check for agressive mode change. When there is * significant high priority traffic in the BSS * throttle back BE traffic by using conservative * parameters. Otherwise BE uses agressive params * to optimize performance of legacy/non-QoS traffic. */ if (wme->wme_flags & WME_F_AGGRMODE) { if (wme->wme_hipri_traffic > wme->wme_hipri_switch_thresh) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, "%s: traffic %u, disable aggressive mode\n", __func__, wme->wme_hipri_traffic); wme->wme_flags &= ~WME_F_AGGRMODE; ieee80211_wme_updateparams_locked(vap); wme->wme_hipri_traffic = wme->wme_hipri_switch_hysteresis; } else wme->wme_hipri_traffic = 0; } else { if (wme->wme_hipri_traffic <= wme->wme_hipri_switch_thresh) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, "%s: traffic %u, enable aggressive mode\n", __func__, wme->wme_hipri_traffic); wme->wme_flags |= WME_F_AGGRMODE; ieee80211_wme_updateparams_locked(vap); wme->wme_hipri_traffic = 0; } else wme->wme_hipri_traffic = wme->wme_hipri_switch_hysteresis; } if (isset(bo->bo_flags, IEEE80211_BEACON_WME)) { (void) ieee80211_add_wme_param(bo->bo_wme, wme); clrbit(bo->bo_flags, IEEE80211_BEACON_WME); } } if (isset(bo->bo_flags, IEEE80211_BEACON_HTINFO)) { ieee80211_ht_update_beacon(vap, bo); clrbit(bo->bo_flags, IEEE80211_BEACON_HTINFO); } #ifdef IEEE80211_SUPPORT_TDMA if (vap->iv_caps & IEEE80211_C_TDMA) { /* * NB: the beacon is potentially updated every TBTT. */ ieee80211_tdma_update_beacon(vap, bo); } #endif #ifdef IEEE80211_SUPPORT_MESH if (vap->iv_opmode == IEEE80211_M_MBSS) ieee80211_mesh_update_beacon(vap, bo); #endif if (vap->iv_opmode == IEEE80211_M_HOSTAP || vap->iv_opmode == IEEE80211_M_MBSS) { /* NB: no IBSS support*/ struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) bo->bo_tim; if (isset(bo->bo_flags, IEEE80211_BEACON_TIM)) { u_int timlen, timoff, i; /* * ATIM/DTIM needs updating. If it fits in the * current space allocated then just copy in the * new bits. Otherwise we need to move any trailing * data to make room. Note that we know there is * contiguous space because ieee80211_beacon_allocate * insures there is space in the mbuf to write a * maximal-size virtual bitmap (based on iv_max_aid). */ /* * Calculate the bitmap size and offset, copy any * trailer out of the way, and then copy in the * new bitmap and update the information element. * Note that the tim bitmap must contain at least * one byte and any offset must be even. */ if (vap->iv_ps_pending != 0) { timoff = 128; /* impossibly large */ for (i = 0; i < vap->iv_tim_len; i++) if (vap->iv_tim_bitmap[i]) { timoff = i &~ 1; break; } KASSERT(timoff != 128, ("tim bitmap empty!")); for (i = vap->iv_tim_len-1; i >= timoff; i--) if (vap->iv_tim_bitmap[i]) break; timlen = 1 + (i - timoff); } else { timoff = 0; timlen = 1; } if (timlen != bo->bo_tim_len) { /* copy up/down trailer */ int adjust = tie->tim_bitmap+timlen - bo->bo_tim_trailer; ovbcopy(bo->bo_tim_trailer, bo->bo_tim_trailer+adjust, bo->bo_tim_trailer_len); bo->bo_tim_trailer += adjust; bo->bo_erp += adjust; bo->bo_htinfo += adjust; #ifdef IEEE80211_SUPPORT_SUPERG bo->bo_ath += adjust; #endif #ifdef IEEE80211_SUPPORT_TDMA bo->bo_tdma += adjust; #endif #ifdef IEEE80211_SUPPORT_MESH bo->bo_meshconf += adjust; #endif bo->bo_appie += adjust; bo->bo_wme += adjust; bo->bo_csa += adjust; bo->bo_quiet += adjust; bo->bo_tim_len = timlen; /* update information element */ tie->tim_len = 3 + timlen; tie->tim_bitctl = timoff; len_changed = 1; } memcpy(tie->tim_bitmap, vap->iv_tim_bitmap + timoff, bo->bo_tim_len); clrbit(bo->bo_flags, IEEE80211_BEACON_TIM); IEEE80211_DPRINTF(vap, IEEE80211_MSG_POWER, "%s: TIM updated, pending %u, off %u, len %u\n", __func__, vap->iv_ps_pending, timoff, timlen); } /* count down DTIM period */ if (tie->tim_count == 0) tie->tim_count = tie->tim_period - 1; else tie->tim_count--; /* update state for buffered multicast frames on DTIM */ if (mcast && tie->tim_count == 0) tie->tim_bitctl |= 1; else tie->tim_bitctl &= ~1; if (isset(bo->bo_flags, IEEE80211_BEACON_CSA)) { struct ieee80211_csa_ie *csa = (struct ieee80211_csa_ie *) bo->bo_csa; /* * Insert or update CSA ie. If we're just starting * to count down to the channel switch then we need * to insert the CSA ie. Otherwise we just need to * drop the count. The actual change happens above * when the vap's count reaches the target count. */ if (vap->iv_csa_count == 0) { memmove(&csa[1], csa, bo->bo_csa_trailer_len); bo->bo_erp += sizeof(*csa); bo->bo_htinfo += sizeof(*csa); bo->bo_wme += sizeof(*csa); #ifdef IEEE80211_SUPPORT_SUPERG bo->bo_ath += sizeof(*csa); #endif #ifdef IEEE80211_SUPPORT_TDMA bo->bo_tdma += sizeof(*csa); #endif #ifdef IEEE80211_SUPPORT_MESH bo->bo_meshconf += sizeof(*csa); #endif bo->bo_appie += sizeof(*csa); bo->bo_csa_trailer_len += sizeof(*csa); bo->bo_quiet += sizeof(*csa); bo->bo_tim_trailer_len += sizeof(*csa); m->m_len += sizeof(*csa); m->m_pkthdr.len += sizeof(*csa); ieee80211_add_csa(bo->bo_csa, vap); } else csa->csa_count--; vap->iv_csa_count++; /* NB: don't clear IEEE80211_BEACON_CSA */ } if (IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) && (vap->iv_flags_ext & IEEE80211_FEXT_DFS) ){ if (vap->iv_quiet) ieee80211_add_quiet(bo->bo_quiet, vap); } if (isset(bo->bo_flags, IEEE80211_BEACON_ERP)) { /* * ERP element needs updating. */ (void) ieee80211_add_erp(bo->bo_erp, ic); clrbit(bo->bo_flags, IEEE80211_BEACON_ERP); } #ifdef IEEE80211_SUPPORT_SUPERG if (isset(bo->bo_flags, IEEE80211_BEACON_ATH)) { ieee80211_add_athcaps(bo->bo_ath, ni); clrbit(bo->bo_flags, IEEE80211_BEACON_ATH); } #endif } if (isset(bo->bo_flags, IEEE80211_BEACON_APPIE)) { const struct ieee80211_appie *aie = vap->iv_appie_beacon; int aielen; uint8_t *frm; aielen = 0; if (aie != NULL) aielen += aie->ie_len; if (aielen != bo->bo_appie_len) { /* copy up/down trailer */ int adjust = aielen - bo->bo_appie_len; ovbcopy(bo->bo_tim_trailer, bo->bo_tim_trailer+adjust, bo->bo_tim_trailer_len); bo->bo_tim_trailer += adjust; bo->bo_appie += adjust; bo->bo_appie_len = aielen; len_changed = 1; } frm = bo->bo_appie; if (aie != NULL) frm = add_appie(frm, aie); clrbit(bo->bo_flags, IEEE80211_BEACON_APPIE); } IEEE80211_UNLOCK(ic); return len_changed; } /* * Do Ethernet-LLC encapsulation for each payload in a fast frame * tunnel encapsulation. The frame is assumed to have an Ethernet * header at the front that must be stripped before prepending the * LLC followed by the Ethernet header passed in (with an Ethernet * type that specifies the payload size). */ struct mbuf * ieee80211_ff_encap1(struct ieee80211vap *vap, struct mbuf *m, const struct ether_header *eh) { struct llc *llc; uint16_t payload; /* XXX optimize by combining m_adj+M_PREPEND */ m_adj(m, sizeof(struct ether_header) - sizeof(struct llc)); llc = mtod(m, struct llc *); llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP; llc->llc_control = LLC_UI; llc->llc_snap.org_code[0] = 0; llc->llc_snap.org_code[1] = 0; llc->llc_snap.org_code[2] = 0; llc->llc_snap.ether_type = eh->ether_type; payload = m->m_pkthdr.len; /* NB: w/o Ethernet header */ M_PREPEND(m, sizeof(struct ether_header), M_NOWAIT); if (m == NULL) { /* XXX cannot happen */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_SUPERG, "%s: no space for ether_header\n", __func__); vap->iv_stats.is_tx_nobuf++; return NULL; } ETHER_HEADER_COPY(mtod(m, void *), eh); mtod(m, struct ether_header *)->ether_type = htons(payload); return m; } /* * Complete an mbuf transmission. * * For now, this simply processes a completed frame after the * driver has completed it's transmission and/or retransmission. * It assumes the frame is an 802.11 encapsulated frame. * * Later on it will grow to become the exit path for a given frame * from the driver and, depending upon how it's been encapsulated * and already transmitted, it may end up doing A-MPDU retransmission, * power save requeuing, etc. * * In order for the above to work, the driver entry point to this * must not hold any driver locks. Thus, the driver needs to delay * any actual mbuf completion until it can release said locks. * * This frees the mbuf and if the mbuf has a node reference, * the node reference will be freed. */ void ieee80211_tx_complete(struct ieee80211_node *ni, struct mbuf *m, int status) { if (ni != NULL) { if (m->m_flags & M_TXCB) ieee80211_process_callback(ni, m, status); ieee80211_free_node(ni); } m_freem(m); } Index: head/sys/net80211/ieee80211_sta.c =================================================================== --- head/sys/net80211/ieee80211_sta.c (revision 282819) +++ head/sys/net80211/ieee80211_sta.c (revision 282820) @@ -1,1865 +1,1865 @@ /*- * Copyright (c) 2007-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #ifdef __FreeBSD__ __FBSDID("$FreeBSD$"); #endif /* * IEEE 802.11 Station mode support. */ #include "opt_inet.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif #include #include #define IEEE80211_RATE2MBS(r) (((r) & IEEE80211_RATE_VAL) / 2) static void sta_vattach(struct ieee80211vap *); static void sta_beacon_miss(struct ieee80211vap *); static int sta_newstate(struct ieee80211vap *, enum ieee80211_state, int); static int sta_input(struct ieee80211_node *, struct mbuf *, int, int); static void sta_recv_mgmt(struct ieee80211_node *, struct mbuf *, int subtype, int rssi, int nf); static void sta_recv_ctl(struct ieee80211_node *, struct mbuf *, int subtype); void ieee80211_sta_attach(struct ieee80211com *ic) { ic->ic_vattach[IEEE80211_M_STA] = sta_vattach; } void ieee80211_sta_detach(struct ieee80211com *ic) { } static void sta_vdetach(struct ieee80211vap *vap) { } static void sta_vattach(struct ieee80211vap *vap) { vap->iv_newstate = sta_newstate; vap->iv_input = sta_input; vap->iv_recv_mgmt = sta_recv_mgmt; vap->iv_recv_ctl = sta_recv_ctl; vap->iv_opdetach = sta_vdetach; vap->iv_bmiss = sta_beacon_miss; } /* * Handle a beacon miss event. The common code filters out * spurious events that can happen when scanning and/or before * reaching RUN state. */ static void sta_beacon_miss(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; IEEE80211_LOCK_ASSERT(ic); KASSERT((ic->ic_flags & IEEE80211_F_SCAN) == 0, ("scanning")); KASSERT(vap->iv_state >= IEEE80211_S_RUN, ("wrong state %s", ieee80211_state_name[vap->iv_state])); IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, "beacon miss, mode %s state %s\n", ieee80211_opmode_name[vap->iv_opmode], ieee80211_state_name[vap->iv_state]); if (vap->iv_state == IEEE80211_S_CSA) { /* * A Channel Switch is pending; assume we missed the * beacon that would've completed the process and just * force the switch. If we made a mistake we'll not * find the AP on the new channel and fall back to a * normal scan. */ ieee80211_csa_completeswitch(ic); return; } if (++vap->iv_bmiss_count < vap->iv_bmiss_max) { /* * Send a directed probe req before falling back to a * scan; if we receive a response ic_bmiss_count will * be reset. Some cards mistakenly report beacon miss * so this avoids the expensive scan if the ap is * still there. */ ieee80211_send_probereq(vap->iv_bss, vap->iv_myaddr, vap->iv_bss->ni_bssid, vap->iv_bss->ni_bssid, vap->iv_bss->ni_essid, vap->iv_bss->ni_esslen); return; } callout_stop(&vap->iv_swbmiss); vap->iv_bmiss_count = 0; vap->iv_stats.is_beacon_miss++; if (vap->iv_roaming == IEEE80211_ROAMING_AUTO) { #ifdef IEEE80211_SUPPORT_SUPERG struct ieee80211com *ic = vap->iv_ic; /* * If we receive a beacon miss interrupt when using * dynamic turbo, attempt to switch modes before * reassociating. */ if (IEEE80211_ATH_CAP(vap, vap->iv_bss, IEEE80211_NODE_TURBOP)) ieee80211_dturbo_switch(vap, ic->ic_bsschan->ic_flags ^ IEEE80211_CHAN_TURBO); #endif /* * Try to reassociate before scanning for a new ap. */ ieee80211_new_state(vap, IEEE80211_S_ASSOC, 1); } else { /* * Somebody else is controlling state changes (e.g. * a user-mode app) don't do anything that would * confuse them; just drop into scan mode so they'll * notified of the state change and given control. */ ieee80211_new_state(vap, IEEE80211_S_SCAN, 0); } } /* * Handle deauth with reason. We retry only for * the cases where we might succeed. Otherwise * we downgrade the ap and scan. */ static void sta_authretry(struct ieee80211vap *vap, struct ieee80211_node *ni, int reason) { switch (reason) { case IEEE80211_STATUS_SUCCESS: /* NB: MLME assoc */ case IEEE80211_STATUS_TIMEOUT: case IEEE80211_REASON_ASSOC_EXPIRE: case IEEE80211_REASON_NOT_AUTHED: case IEEE80211_REASON_NOT_ASSOCED: case IEEE80211_REASON_ASSOC_LEAVE: case IEEE80211_REASON_ASSOC_NOT_AUTHED: IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_AUTH, 1); break; default: ieee80211_scan_assoc_fail(vap, vap->iv_bss->ni_macaddr, reason); if (vap->iv_roaming == IEEE80211_ROAMING_AUTO) ieee80211_check_scan_current(vap); break; } } /* * IEEE80211_M_STA vap state machine handler. * This routine handles the main states in the 802.11 protocol. */ static int sta_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; enum ieee80211_state ostate; IEEE80211_LOCK_ASSERT(ic); ostate = vap->iv_state; IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate], arg); vap->iv_state = nstate; /* state transition */ callout_stop(&vap->iv_mgtsend); /* XXX callout_drain */ if (ostate != IEEE80211_S_SCAN) ieee80211_cancel_scan(vap); /* background scan */ ni = vap->iv_bss; /* NB: no reference held */ if (vap->iv_flags_ext & IEEE80211_FEXT_SWBMISS) callout_stop(&vap->iv_swbmiss); switch (nstate) { case IEEE80211_S_INIT: switch (ostate) { case IEEE80211_S_SLEEP: /* XXX wakeup */ /* XXX driver hook to wakeup the hardware? */ case IEEE80211_S_RUN: IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DISASSOC, IEEE80211_REASON_ASSOC_LEAVE); ieee80211_sta_leave(ni); break; case IEEE80211_S_ASSOC: IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, IEEE80211_REASON_AUTH_LEAVE); break; case IEEE80211_S_SCAN: ieee80211_cancel_scan(vap); break; default: goto invalid; } if (ostate != IEEE80211_S_INIT) { /* NB: optimize INIT -> INIT case */ ieee80211_reset_bss(vap); } if (vap->iv_auth->ia_detach != NULL) vap->iv_auth->ia_detach(vap); break; case IEEE80211_S_SCAN: switch (ostate) { case IEEE80211_S_INIT: /* * Initiate a scan. We can come here as a result * of an IEEE80211_IOC_SCAN_REQ too in which case * the vap will be marked with IEEE80211_FEXT_SCANREQ * and the scan request parameters will be present * in iv_scanreq. Otherwise we do the default. */ if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) { ieee80211_check_scan(vap, vap->iv_scanreq_flags, vap->iv_scanreq_duration, vap->iv_scanreq_mindwell, vap->iv_scanreq_maxdwell, vap->iv_scanreq_nssid, vap->iv_scanreq_ssid); vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ; } else ieee80211_check_scan_current(vap); break; case IEEE80211_S_SCAN: case IEEE80211_S_AUTH: case IEEE80211_S_ASSOC: /* * These can happen either because of a timeout * on an assoc/auth response or because of a * change in state that requires a reset. For * the former we're called with a non-zero arg * that is the cause for the failure; pass this * to the scan code so it can update state. * Otherwise trigger a new scan unless we're in * manual roaming mode in which case an application * must issue an explicit scan request. */ if (arg != 0) ieee80211_scan_assoc_fail(vap, vap->iv_bss->ni_macaddr, arg); if (vap->iv_roaming == IEEE80211_ROAMING_AUTO) ieee80211_check_scan_current(vap); break; case IEEE80211_S_SLEEP: /* beacon miss */ /* * XXX if in sleep we need to wakeup the hardware. */ /* FALLTHROUGH */ case IEEE80211_S_RUN: /* beacon miss */ /* * Beacon miss. Notify user space and if not * under control of a user application (roaming * manual) kick off a scan to re-connect. */ ieee80211_sta_leave(ni); if (vap->iv_roaming == IEEE80211_ROAMING_AUTO) ieee80211_check_scan_current(vap); break; default: goto invalid; } break; case IEEE80211_S_AUTH: switch (ostate) { case IEEE80211_S_INIT: case IEEE80211_S_SCAN: IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_AUTH, 1); break; case IEEE80211_S_AUTH: case IEEE80211_S_ASSOC: switch (arg & 0xff) { case IEEE80211_FC0_SUBTYPE_AUTH: /* ??? */ IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_AUTH, 2); break; case IEEE80211_FC0_SUBTYPE_DEAUTH: sta_authretry(vap, ni, arg>>8); break; } break; case IEEE80211_S_RUN: switch (arg & 0xff) { case IEEE80211_FC0_SUBTYPE_AUTH: IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_AUTH, 2); vap->iv_state = ostate; /* stay RUN */ break; case IEEE80211_FC0_SUBTYPE_DEAUTH: ieee80211_sta_leave(ni); if (vap->iv_roaming == IEEE80211_ROAMING_AUTO) { /* try to reauth */ IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_AUTH, 1); } break; } break; default: goto invalid; } break; case IEEE80211_S_ASSOC: switch (ostate) { case IEEE80211_S_AUTH: case IEEE80211_S_ASSOC: IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_ASSOC_REQ, 0); break; case IEEE80211_S_SLEEP: /* cannot happen */ case IEEE80211_S_RUN: ieee80211_sta_leave(ni); if (vap->iv_roaming == IEEE80211_ROAMING_AUTO) { IEEE80211_SEND_MGMT(ni, arg ? IEEE80211_FC0_SUBTYPE_REASSOC_REQ : IEEE80211_FC0_SUBTYPE_ASSOC_REQ, 0); } break; default: goto invalid; } break; case IEEE80211_S_RUN: if (vap->iv_flags & IEEE80211_F_WPA) { /* XXX validate prerequisites */ } switch (ostate) { case IEEE80211_S_RUN: case IEEE80211_S_CSA: break; case IEEE80211_S_AUTH: /* when join is done in fw */ case IEEE80211_S_ASSOC: #ifdef IEEE80211_DEBUG if (ieee80211_msg_debug(vap)) { ieee80211_note(vap, "%s with %s ssid ", (vap->iv_opmode == IEEE80211_M_STA ? "associated" : "synchronized"), ether_sprintf(ni->ni_bssid)); ieee80211_print_essid(vap->iv_bss->ni_essid, ni->ni_esslen); /* XXX MCS/HT */ printf(" channel %d start %uMb\n", ieee80211_chan2ieee(ic, ic->ic_curchan), IEEE80211_RATE2MBS(ni->ni_txrate)); } #endif ieee80211_scan_assoc_success(vap, ni->ni_macaddr); ieee80211_notify_node_join(ni, arg == IEEE80211_FC0_SUBTYPE_ASSOC_RESP); break; case IEEE80211_S_SLEEP: /* Wake up from sleep */ vap->iv_sta_ps(vap, 0); break; default: goto invalid; } ieee80211_sync_curchan(ic); if (ostate != IEEE80211_S_RUN && (vap->iv_flags_ext & IEEE80211_FEXT_SWBMISS)) { /* * Start s/w beacon miss timer for devices w/o * hardware support. We fudge a bit here since * we're doing this in software. */ vap->iv_swbmiss_period = IEEE80211_TU_TO_TICKS( 2 * vap->iv_bmissthreshold * ni->ni_intval); vap->iv_swbmiss_count = 0; callout_reset(&vap->iv_swbmiss, vap->iv_swbmiss_period, ieee80211_swbmiss, vap); } /* * When 802.1x is not in use mark the port authorized * at this point so traffic can flow. */ if (ni->ni_authmode != IEEE80211_AUTH_8021X) ieee80211_node_authorize(ni); /* * Fake association when joining an existing bss. * * Don't do this if we're doing SLEEP->RUN. */ if (ic->ic_newassoc != NULL && ostate != IEEE80211_S_SLEEP) ic->ic_newassoc(vap->iv_bss, (ostate != IEEE80211_S_RUN)); break; case IEEE80211_S_CSA: if (ostate != IEEE80211_S_RUN) goto invalid; break; case IEEE80211_S_SLEEP: vap->iv_sta_ps(vap, 1); break; default: invalid: IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: unexpected state transition %s -> %s\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate]); break; } return 0; } /* * Return non-zero if the frame is an echo of a multicast * frame sent by ourself. The dir is known to be DSTODS. */ static __inline int isdstods_mcastecho(struct ieee80211vap *vap, const struct ieee80211_frame *wh) { #define QWH4(wh) ((const struct ieee80211_qosframe_addr4 *)wh) #define WH4(wh) ((const struct ieee80211_frame_addr4 *)wh) const uint8_t *sa; KASSERT(vap->iv_opmode == IEEE80211_M_STA, ("wrong mode")); if (!IEEE80211_IS_MULTICAST(wh->i_addr3)) return 0; sa = IEEE80211_QOS_HAS_SEQ(wh) ? QWH4(wh)->i_addr4 : WH4(wh)->i_addr4; return IEEE80211_ADDR_EQ(sa, vap->iv_myaddr); #undef WH4 #undef QWH4 } /* * Return non-zero if the frame is an echo of a multicast * frame sent by ourself. The dir is known to be FROMDS. */ static __inline int isfromds_mcastecho(struct ieee80211vap *vap, const struct ieee80211_frame *wh) { KASSERT(vap->iv_opmode == IEEE80211_M_STA, ("wrong mode")); if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) return 0; return IEEE80211_ADDR_EQ(wh->i_addr3, vap->iv_myaddr); } /* * Decide if a received management frame should be * printed when debugging is enabled. This filters some * of the less interesting frames that come frequently * (e.g. beacons). */ static __inline int doprint(struct ieee80211vap *vap, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_BEACON: return (vap->iv_ic->ic_flags & IEEE80211_F_SCAN); case IEEE80211_FC0_SUBTYPE_PROBE_REQ: return 0; } return 1; } /* * Process a received frame. The node associated with the sender * should be supplied. If nothing was found in the node table then * the caller is assumed to supply a reference to iv_bss instead. * The RSSI and a timestamp are also supplied. The RSSI data is used * during AP scanning to select a AP to associate with; it can have * any units so long as values have consistent units and higher values * mean ``better signal''. The receive timestamp is currently not used * by the 802.11 layer. */ static int sta_input(struct ieee80211_node *ni, struct mbuf *m, int rssi, int nf) { -#define HAS_SEQ(type) ((type & 0x4) == 0) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ifnet *ifp = vap->iv_ifp; struct ieee80211_frame *wh; struct ieee80211_key *key; struct ether_header *eh; int hdrspace, need_tap = 1; /* mbuf need to be tapped. */ uint8_t dir, type, subtype, qos; uint8_t *bssid; uint16_t rxseq; if (m->m_flags & M_AMPDU_MPDU) { /* * Fastpath for A-MPDU reorder q resubmission. Frames * w/ M_AMPDU_MPDU marked have already passed through * here but were received out of order and been held on * the reorder queue. When resubmitted they are marked * with the M_AMPDU_MPDU flag and we can bypass most of * the normal processing. */ wh = mtod(m, struct ieee80211_frame *); type = IEEE80211_FC0_TYPE_DATA; dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK; subtype = IEEE80211_FC0_SUBTYPE_QOS; hdrspace = ieee80211_hdrspace(ic, wh); /* XXX optimize? */ goto resubmit_ampdu; } KASSERT(ni != NULL, ("null node")); ni->ni_inact = ni->ni_inact_reload; type = -1; /* undefined */ if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "too short (1): len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } /* * Bit of a cheat here, we use a pointer for a 3-address * frame format but don't reference fields past outside * ieee80211_frame_min w/o first validating the data is * present. */ wh = mtod(m, struct ieee80211_frame *); if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "wrong version, fc %02x:%02x", wh->i_fc[0], wh->i_fc[1]); vap->iv_stats.is_rx_badversion++; goto err; } dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK; type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { bssid = wh->i_addr2; if (!IEEE80211_ADDR_EQ(bssid, ni->ni_bssid)) { /* not interested in */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, NULL, "%s", "not to bss"); vap->iv_stats.is_rx_wrongbss++; goto out; } /* * Some devices may be in a promiscuous mode * where they receive frames for multiple station * addresses. * * If we receive a data frame that isn't * destined to our VAP MAC, drop it. * * XXX TODO: This is only enforced when not scanning; * XXX it assumes a software-driven scan will put the NIC * XXX into a "no data frames" mode before setting this * XXX flag. Otherwise it may be possible that we'll still * XXX process data frames whilst scanning. */ if ((! IEEE80211_IS_MULTICAST(wh->i_addr1)) && (! IEEE80211_ADDR_EQ(wh->i_addr1, IF_LLADDR(ifp)))) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, NULL, "not to cur sta: lladdr=%6D, addr1=%6D", IF_LLADDR(ifp), ":", wh->i_addr1, ":"); vap->iv_stats.is_rx_wrongbss++; goto out; } IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi); ni->ni_noise = nf; - if (HAS_SEQ(type) && !IEEE80211_IS_MULTICAST(wh->i_addr1)) { + if ( IEEE80211_HAS_SEQ(type, subtype) && + !IEEE80211_IS_MULTICAST(wh->i_addr1)) { uint8_t tid = ieee80211_gettid(wh); if (IEEE80211_QOS_HAS_SEQ(wh) && TID_TO_WME_AC(tid) >= WME_AC_VI) ic->ic_wme.wme_hipri_traffic++; rxseq = le16toh(*(uint16_t *)wh->i_seq); if (! ieee80211_check_rxseq(ni, wh)) { /* duplicate, discard */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, "duplicate", "seqno <%u,%u> fragno <%u,%u> tid %u", rxseq >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[tid] >> IEEE80211_SEQ_SEQ_SHIFT, rxseq & IEEE80211_SEQ_FRAG_MASK, ni->ni_rxseqs[tid] & IEEE80211_SEQ_FRAG_MASK, tid); vap->iv_stats.is_rx_dup++; IEEE80211_NODE_STAT(ni, rx_dup); goto out; } ni->ni_rxseqs[tid] = rxseq; } } switch (type) { case IEEE80211_FC0_TYPE_DATA: hdrspace = ieee80211_hdrspace(ic, wh); if (m->m_len < hdrspace && (m = m_pullup(m, hdrspace)) == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "data too short: expecting %u", hdrspace); vap->iv_stats.is_rx_tooshort++; goto out; /* XXX */ } /* * Handle A-MPDU re-ordering. If the frame is to be * processed directly then ieee80211_ampdu_reorder * will return 0; otherwise it has consumed the mbuf * and we should do nothing more with it. */ if ((m->m_flags & M_AMPDU) && (dir == IEEE80211_FC1_DIR_FROMDS || dir == IEEE80211_FC1_DIR_DSTODS) && ieee80211_ampdu_reorder(ni, m) != 0) { m = NULL; goto out; } resubmit_ampdu: if (dir == IEEE80211_FC1_DIR_FROMDS) { if ((ifp->if_flags & IFF_SIMPLEX) && isfromds_mcastecho(vap, wh)) { /* * In IEEE802.11 network, multicast * packets sent from "me" are broadcast * from the AP; silently discard for * SIMPLEX interface. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "%s", "multicast echo"); vap->iv_stats.is_rx_mcastecho++; goto out; } if ((vap->iv_flags & IEEE80211_F_DWDS) && IEEE80211_IS_MULTICAST(wh->i_addr1)) { /* * DWDS sta's must drop 3-address mcast frames * as they will be sent separately as a 4-addr * frame. Accepting the 3-addr frame will * confuse the bridge into thinking the sending * sta is located at the end of WDS link. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "3-address data", "%s", "DWDS enabled"); vap->iv_stats.is_rx_mcastecho++; goto out; } } else if (dir == IEEE80211_FC1_DIR_DSTODS) { if ((vap->iv_flags & IEEE80211_F_DWDS) == 0) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "4-address data", "%s", "DWDS not enabled"); vap->iv_stats.is_rx_wrongdir++; goto out; } if ((ifp->if_flags & IFF_SIMPLEX) && isdstods_mcastecho(vap, wh)) { /* * In IEEE802.11 network, multicast * packets sent from "me" are broadcast * from the AP; silently discard for * SIMPLEX interface. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "4-address data", "%s", "multicast echo"); vap->iv_stats.is_rx_mcastecho++; goto out; } } else { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "incorrect dir 0x%x", dir); vap->iv_stats.is_rx_wrongdir++; goto out; } /* * Handle privacy requirements. Note that we * must not be preempted from here until after * we (potentially) call ieee80211_crypto_demic; * otherwise we may violate assumptions in the * crypto cipher modules used to do delayed update * of replay sequence numbers. */ if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) { /* * Discard encrypted frames when privacy is off. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "WEP", "%s", "PRIVACY off"); vap->iv_stats.is_rx_noprivacy++; IEEE80211_NODE_STAT(ni, rx_noprivacy); goto out; } key = ieee80211_crypto_decap(ni, m, hdrspace); if (key == NULL) { /* NB: stats+msgs handled in crypto_decap */ IEEE80211_NODE_STAT(ni, rx_wepfail); goto out; } wh = mtod(m, struct ieee80211_frame *); wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED; } else { /* XXX M_WEP and IEEE80211_F_PRIVACY */ key = NULL; } /* * Save QoS bits for use below--before we strip the header. */ if (subtype == IEEE80211_FC0_SUBTYPE_QOS) { qos = (dir == IEEE80211_FC1_DIR_DSTODS) ? ((struct ieee80211_qosframe_addr4 *)wh)->i_qos[0] : ((struct ieee80211_qosframe *)wh)->i_qos[0]; } else qos = 0; /* * Next up, any fragmentation. */ if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { m = ieee80211_defrag(ni, m, hdrspace); if (m == NULL) { /* Fragment dropped or frame not complete yet */ goto out; } } wh = NULL; /* no longer valid, catch any uses */ /* * Next strip any MSDU crypto bits. */ if (key != NULL && !ieee80211_crypto_demic(vap, key, m, 0)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, ni->ni_macaddr, "data", "%s", "demic error"); vap->iv_stats.is_rx_demicfail++; IEEE80211_NODE_STAT(ni, rx_demicfail); goto out; } /* copy to listener after decrypt */ if (ieee80211_radiotap_active_vap(vap)) ieee80211_radiotap_rx(vap, m); need_tap = 0; /* * Finally, strip the 802.11 header. */ m = ieee80211_decap(vap, m, hdrspace); if (m == NULL) { /* XXX mask bit to check for both */ /* don't count Null data frames as errors */ if (subtype == IEEE80211_FC0_SUBTYPE_NODATA || subtype == IEEE80211_FC0_SUBTYPE_QOS_NULL) goto out; IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, ni->ni_macaddr, "data", "%s", "decap error"); vap->iv_stats.is_rx_decap++; IEEE80211_NODE_STAT(ni, rx_decap); goto err; } eh = mtod(m, struct ether_header *); if (!ieee80211_node_is_authorized(ni)) { /* * Deny any non-PAE frames received prior to * authorization. For open/shared-key * authentication the port is mark authorized * after authentication completes. For 802.1x * the port is not marked authorized by the * authenticator until the handshake has completed. */ if (eh->ether_type != htons(ETHERTYPE_PAE)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, eh->ether_shost, "data", "unauthorized port: ether type 0x%x len %u", eh->ether_type, m->m_pkthdr.len); vap->iv_stats.is_rx_unauth++; IEEE80211_NODE_STAT(ni, rx_unauth); goto err; } } else { /* * When denying unencrypted frames, discard * any non-PAE frames received without encryption. */ if ((vap->iv_flags & IEEE80211_F_DROPUNENC) && (key == NULL && (m->m_flags & M_WEP) == 0) && eh->ether_type != htons(ETHERTYPE_PAE)) { /* * Drop unencrypted frames. */ vap->iv_stats.is_rx_unencrypted++; IEEE80211_NODE_STAT(ni, rx_unencrypted); goto out; } } /* XXX require HT? */ if (qos & IEEE80211_QOS_AMSDU) { m = ieee80211_decap_amsdu(ni, m); if (m == NULL) return IEEE80211_FC0_TYPE_DATA; } else { #ifdef IEEE80211_SUPPORT_SUPERG m = ieee80211_decap_fastframe(vap, ni, m); if (m == NULL) return IEEE80211_FC0_TYPE_DATA; #endif } ieee80211_deliver_data(vap, ni, m); return IEEE80211_FC0_TYPE_DATA; case IEEE80211_FC0_TYPE_MGT: vap->iv_stats.is_rx_mgmt++; IEEE80211_NODE_STAT(ni, rx_mgmt); if (dir != IEEE80211_FC1_DIR_NODS) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "incorrect dir 0x%x", dir); vap->iv_stats.is_rx_wrongdir++; goto err; } if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "mgt", "too short: len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } #ifdef IEEE80211_DEBUG if ((ieee80211_msg_debug(vap) && doprint(vap, subtype)) || ieee80211_msg_dumppkts(vap)) { if_printf(ifp, "received %s from %s rssi %d\n", ieee80211_mgt_subtype_name[subtype >> IEEE80211_FC0_SUBTYPE_SHIFT], ether_sprintf(wh->i_addr2), rssi); } #endif if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { if (subtype != IEEE80211_FC0_SUBTYPE_AUTH) { /* * Only shared key auth frames with a challenge * should be encrypted, discard all others. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, ieee80211_mgt_subtype_name[subtype >> IEEE80211_FC0_SUBTYPE_SHIFT], "%s", "WEP set but not permitted"); vap->iv_stats.is_rx_mgtdiscard++; /* XXX */ goto out; } if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) { /* * Discard encrypted frames when privacy is off. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "mgt", "%s", "WEP set but PRIVACY off"); vap->iv_stats.is_rx_noprivacy++; goto out; } hdrspace = ieee80211_hdrspace(ic, wh); key = ieee80211_crypto_decap(ni, m, hdrspace); if (key == NULL) { /* NB: stats+msgs handled in crypto_decap */ goto out; } wh = mtod(m, struct ieee80211_frame *); wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED; } vap->iv_recv_mgmt(ni, m, subtype, rssi, nf); goto out; case IEEE80211_FC0_TYPE_CTL: vap->iv_stats.is_rx_ctl++; IEEE80211_NODE_STAT(ni, rx_ctrl); vap->iv_recv_ctl(ni, m, subtype); goto out; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, NULL, "bad frame type 0x%x", type); /* should not come here */ break; } err: if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); out: if (m != NULL) { if (need_tap && ieee80211_radiotap_active_vap(vap)) ieee80211_radiotap_rx(vap, m); m_freem(m); } return type; } static void sta_auth_open(struct ieee80211_node *ni, struct ieee80211_frame *wh, int rssi, int nf, uint16_t seq, uint16_t status) { struct ieee80211vap *vap = ni->ni_vap; if (ni->ni_authmode == IEEE80211_AUTH_SHARED) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "open auth", "bad sta auth mode %u", ni->ni_authmode); vap->iv_stats.is_rx_bad_auth++; /* XXX */ return; } if (vap->iv_state != IEEE80211_S_AUTH || seq != IEEE80211_AUTH_OPEN_RESPONSE) { vap->iv_stats.is_rx_bad_auth++; return; } if (status != 0) { IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, ni, "open auth failed (reason %d)", status); vap->iv_stats.is_rx_auth_fail++; vap->iv_stats.is_rx_authfail_code = status; ieee80211_new_state(vap, IEEE80211_S_SCAN, IEEE80211_SCAN_FAIL_STATUS); } else ieee80211_new_state(vap, IEEE80211_S_ASSOC, 0); } static void sta_auth_shared(struct ieee80211_node *ni, struct ieee80211_frame *wh, uint8_t *frm, uint8_t *efrm, int rssi, int nf, uint16_t seq, uint16_t status) { struct ieee80211vap *vap = ni->ni_vap; uint8_t *challenge; int estatus; /* * NB: this can happen as we allow pre-shared key * authentication to be enabled w/o wep being turned * on so that configuration of these can be done * in any order. It may be better to enforce the * ordering in which case this check would just be * for sanity/consistency. */ if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key auth", "%s", " PRIVACY is disabled"); estatus = IEEE80211_STATUS_ALG; goto bad; } /* * Pre-shared key authentication is evil; accept * it only if explicitly configured (it is supported * mainly for compatibility with clients like OS X). */ if (ni->ni_authmode != IEEE80211_AUTH_AUTO && ni->ni_authmode != IEEE80211_AUTH_SHARED) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key auth", "bad sta auth mode %u", ni->ni_authmode); vap->iv_stats.is_rx_bad_auth++; /* XXX maybe a unique error? */ estatus = IEEE80211_STATUS_ALG; goto bad; } challenge = NULL; if (frm + 1 < efrm) { if ((frm[1] + 2) > (efrm - frm)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key auth", "ie %d/%d too long", frm[0], (frm[1] + 2) - (efrm - frm)); vap->iv_stats.is_rx_bad_auth++; estatus = IEEE80211_STATUS_CHALLENGE; goto bad; } if (*frm == IEEE80211_ELEMID_CHALLENGE) challenge = frm; frm += frm[1] + 2; } switch (seq) { case IEEE80211_AUTH_SHARED_CHALLENGE: case IEEE80211_AUTH_SHARED_RESPONSE: if (challenge == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key auth", "%s", "no challenge"); vap->iv_stats.is_rx_bad_auth++; estatus = IEEE80211_STATUS_CHALLENGE; goto bad; } if (challenge[1] != IEEE80211_CHALLENGE_LEN) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_AUTH, ni->ni_macaddr, "shared key auth", "bad challenge len %d", challenge[1]); vap->iv_stats.is_rx_bad_auth++; estatus = IEEE80211_STATUS_CHALLENGE; goto bad; } default: break; } if (vap->iv_state != IEEE80211_S_AUTH) return; switch (seq) { case IEEE80211_AUTH_SHARED_PASS: if (ni->ni_challenge != NULL) { free(ni->ni_challenge, M_80211_NODE); ni->ni_challenge = NULL; } if (status != 0) { IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_AUTH, wh, "shared key auth failed (reason %d)", status); vap->iv_stats.is_rx_auth_fail++; vap->iv_stats.is_rx_authfail_code = status; return; } ieee80211_new_state(vap, IEEE80211_S_ASSOC, 0); break; case IEEE80211_AUTH_SHARED_CHALLENGE: if (!ieee80211_alloc_challenge(ni)) return; /* XXX could optimize by passing recvd challenge */ memcpy(ni->ni_challenge, &challenge[2], challenge[1]); IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_AUTH, seq + 1); break; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_AUTH, wh, "shared key auth", "bad seq %d", seq); vap->iv_stats.is_rx_bad_auth++; return; } return; bad: /* * Kick the state machine. This short-circuits * using the mgt frame timeout to trigger the * state transition. */ if (vap->iv_state == IEEE80211_S_AUTH) ieee80211_new_state(vap, IEEE80211_S_SCAN, IEEE80211_SCAN_FAIL_STATUS); } int ieee80211_parse_wmeparams(struct ieee80211vap *vap, uint8_t *frm, const struct ieee80211_frame *wh) { #define MS(_v, _f) (((_v) & _f) >> _f##_S) struct ieee80211_wme_state *wme = &vap->iv_ic->ic_wme; u_int len = frm[1], qosinfo; int i; if (len < sizeof(struct ieee80211_wme_param)-2) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_WME, wh, "WME", "too short, len %u", len); return -1; } qosinfo = frm[__offsetof(struct ieee80211_wme_param, param_qosInfo)]; qosinfo &= WME_QOSINFO_COUNT; /* XXX do proper check for wraparound */ if (qosinfo == wme->wme_wmeChanParams.cap_info) return 0; frm += __offsetof(struct ieee80211_wme_param, params_acParams); for (i = 0; i < WME_NUM_AC; i++) { struct wmeParams *wmep = &wme->wme_wmeChanParams.cap_wmeParams[i]; /* NB: ACI not used */ wmep->wmep_acm = MS(frm[0], WME_PARAM_ACM); wmep->wmep_aifsn = MS(frm[0], WME_PARAM_AIFSN); wmep->wmep_logcwmin = MS(frm[1], WME_PARAM_LOGCWMIN); wmep->wmep_logcwmax = MS(frm[1], WME_PARAM_LOGCWMAX); wmep->wmep_txopLimit = LE_READ_2(frm+2); frm += 4; } wme->wme_wmeChanParams.cap_info = qosinfo; return 1; #undef MS } /* * Process 11h Channel Switch Announcement (CSA) ie. If this * is the first CSA then initiate the switch. Otherwise we * track state and trigger completion and/or cancel of the switch. * XXX should be public for IBSS use */ static void ieee80211_parse_csaparams(struct ieee80211vap *vap, uint8_t *frm, const struct ieee80211_frame *wh) { struct ieee80211com *ic = vap->iv_ic; const struct ieee80211_csa_ie *csa = (const struct ieee80211_csa_ie *) frm; KASSERT(vap->iv_state >= IEEE80211_S_RUN, ("state %s", ieee80211_state_name[vap->iv_state])); if (csa->csa_mode > 1) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_DOTH, wh, "CSA", "invalid mode %u", csa->csa_mode); return; } IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_CSAPENDING) == 0) { /* * Convert the channel number to a channel reference. We * try first to preserve turbo attribute of the current * channel then fallback. Note this will not work if the * CSA specifies a channel that requires a band switch (e.g. * 11a => 11g). This is intentional as 11h is defined only * for 5GHz/11a and because the switch does not involve a * reassociation, protocol state (capabilities, negotated * rates, etc) may/will be wrong. */ struct ieee80211_channel *c = ieee80211_find_channel_byieee(ic, csa->csa_newchan, (ic->ic_bsschan->ic_flags & IEEE80211_CHAN_ALLTURBO)); if (c == NULL) { c = ieee80211_find_channel_byieee(ic, csa->csa_newchan, (ic->ic_bsschan->ic_flags & IEEE80211_CHAN_ALL)); if (c == NULL) { IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_DOTH, wh, "CSA", "invalid channel %u", csa->csa_newchan); goto done; } } #if IEEE80211_CSA_COUNT_MIN > 0 if (csa->csa_count < IEEE80211_CSA_COUNT_MIN) { /* * Require at least IEEE80211_CSA_COUNT_MIN count to * reduce the risk of being redirected by a fabricated * CSA. If a valid CSA is dropped we'll still get a * beacon miss when the AP leaves the channel so we'll * eventually follow to the new channel. * * NOTE: this violates the 11h spec that states that * count may be any value and if 0 then a switch * should happen asap. */ IEEE80211_DISCARD_IE(vap, IEEE80211_MSG_ELEMID | IEEE80211_MSG_DOTH, wh, "CSA", "count %u too small, must be >= %u", csa->csa_count, IEEE80211_CSA_COUNT_MIN); goto done; } #endif ieee80211_csa_startswitch(ic, c, csa->csa_mode, csa->csa_count); } else { /* * Validate this ie against the initial CSA. We require * mode and channel not change and the count must be * monotonically decreasing. This may be pointless and * canceling the switch as a result may be too paranoid but * in the worst case if we drop out of CSA because of this * and the AP does move then we'll just end up taking a * beacon miss and scan to find the AP. * * XXX may want <= on count as we also process ProbeResp * frames and those may come in w/ the same count as the * previous beacon; but doing so leaves us open to a stuck * count until we add a dead-man timer */ if (!(csa->csa_count < ic->ic_csa_count && csa->csa_mode == ic->ic_csa_mode && csa->csa_newchan == ieee80211_chan2ieee(ic, ic->ic_csa_newchan))) { IEEE80211_NOTE_FRAME(vap, IEEE80211_MSG_DOTH, wh, "CSA ie mismatch, initial ie <%d,%d,%d>, " "this ie <%d,%d,%d>", ic->ic_csa_mode, ic->ic_csa_newchan, ic->ic_csa_count, csa->csa_mode, csa->csa_newchan, csa->csa_count); ieee80211_csa_cancelswitch(ic); } else { if (csa->csa_count <= 1) ieee80211_csa_completeswitch(ic); else ic->ic_csa_count = csa->csa_count; } } done: IEEE80211_UNLOCK(ic); } /* * Return non-zero if a background scan may be continued: * o bg scan is active * o no channel switch is pending * o there has not been any traffic recently * * Note we do not check if there is an administrative enable; * this is only done to start the scan. We assume that any * change in state will be accompanied by a request to cancel * active scans which will otherwise cause this test to fail. */ static __inline int contbgscan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; return ((ic->ic_flags_ext & IEEE80211_FEXT_BGSCAN) && (ic->ic_flags & IEEE80211_F_CSAPENDING) == 0 && vap->iv_state == IEEE80211_S_RUN && /* XXX? */ time_after(ticks, ic->ic_lastdata + vap->iv_bgscanidle)); } /* * Return non-zero if a backgrond scan may be started: * o bg scanning is administratively enabled * o no channel switch is pending * o we are not boosted on a dynamic turbo channel * o there has not been a scan recently * o there has not been any traffic recently */ static __inline int startbgscan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; return ((vap->iv_flags & IEEE80211_F_BGSCAN) && (ic->ic_flags & IEEE80211_F_CSAPENDING) == 0 && #ifdef IEEE80211_SUPPORT_SUPERG !IEEE80211_IS_CHAN_DTURBO(ic->ic_curchan) && #endif time_after(ticks, ic->ic_lastscan + vap->iv_bgscanintvl) && time_after(ticks, ic->ic_lastdata + vap->iv_bgscanidle)); } static void sta_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0, int subtype, int rssi, int nf) { #define ISPROBE(_st) ((_st) == IEEE80211_FC0_SUBTYPE_PROBE_RESP) #define ISREASSOC(_st) ((_st) == IEEE80211_FC0_SUBTYPE_REASSOC_RESP) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; uint8_t *frm, *efrm; uint8_t *rates, *xrates, *wme, *htcap, *htinfo; uint8_t rate; int ht_state_change = 0; wh = mtod(m0, struct ieee80211_frame *); frm = (uint8_t *)&wh[1]; efrm = mtod(m0, uint8_t *) + m0->m_len; switch (subtype) { case IEEE80211_FC0_SUBTYPE_PROBE_RESP: case IEEE80211_FC0_SUBTYPE_BEACON: { struct ieee80211_scanparams scan; /* * We process beacon/probe response frames: * o when scanning, or * o station mode when associated (to collect state * updates such as 802.11g slot time) * Frames otherwise received are discarded. */ if (!((ic->ic_flags & IEEE80211_F_SCAN) || ni->ni_associd)) { vap->iv_stats.is_rx_mgtdiscard++; return; } /* XXX probe response in sta mode when !scanning? */ if (ieee80211_parse_beacon(ni, m0, &scan) != 0) { if (! (ic->ic_flags & IEEE80211_F_SCAN)) vap->iv_stats.is_beacon_bad++; return; } /* * Count frame now that we know it's to be processed. */ if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) { vap->iv_stats.is_rx_beacon++; /* XXX remove */ IEEE80211_NODE_STAT(ni, rx_beacons); } else IEEE80211_NODE_STAT(ni, rx_proberesp); /* * When operating in station mode, check for state updates. * Be careful to ignore beacons received while doing a * background scan. We consider only 11g/WMM stuff right now. */ if (ni->ni_associd != 0 && ((ic->ic_flags & IEEE80211_F_SCAN) == 0 || IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_bssid))) { /* record tsf of last beacon */ memcpy(ni->ni_tstamp.data, scan.tstamp, sizeof(ni->ni_tstamp)); /* count beacon frame for s/w bmiss handling */ vap->iv_swbmiss_count++; vap->iv_bmiss_count = 0; if (ni->ni_erp != scan.erp) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ASSOC, wh->i_addr2, "erp change: was 0x%x, now 0x%x", ni->ni_erp, scan.erp); if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) && (ni->ni_erp & IEEE80211_ERP_USE_PROTECTION)) ic->ic_flags |= IEEE80211_F_USEPROT; else ic->ic_flags &= ~IEEE80211_F_USEPROT; ni->ni_erp = scan.erp; /* XXX statistic */ /* XXX driver notification */ } if ((ni->ni_capinfo ^ scan.capinfo) & IEEE80211_CAPINFO_SHORT_SLOTTIME) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ASSOC, wh->i_addr2, "capabilities change: was 0x%x, now 0x%x", ni->ni_capinfo, scan.capinfo); /* * NB: we assume short preamble doesn't * change dynamically */ ieee80211_set_shortslottime(ic, IEEE80211_IS_CHAN_A(ic->ic_bsschan) || (scan.capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME)); ni->ni_capinfo = (ni->ni_capinfo &~ IEEE80211_CAPINFO_SHORT_SLOTTIME) | (scan.capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME); /* XXX statistic */ } if (scan.wme != NULL && (ni->ni_flags & IEEE80211_NODE_QOS) && ieee80211_parse_wmeparams(vap, scan.wme, wh) > 0) ieee80211_wme_updateparams(vap); #ifdef IEEE80211_SUPPORT_SUPERG if (scan.ath != NULL) ieee80211_parse_athparams(ni, scan.ath, wh); #endif if (scan.htcap != NULL && scan.htinfo != NULL && (vap->iv_flags_ht & IEEE80211_FHT_HT)) { /* XXX state changes? */ if (ieee80211_ht_updateparams(ni, scan.htcap, scan.htinfo)) ht_state_change = 1; } if (scan.quiet) ic->ic_set_quiet(ni, scan.quiet); if (scan.tim != NULL) { struct ieee80211_tim_ie *tim = (struct ieee80211_tim_ie *) scan.tim; /* * XXX Check/debug this code; see if it's about * the right time to force the VAP awake if we * receive a frame destined for us? */ int aid = IEEE80211_AID(ni->ni_associd); int ix = aid / NBBY; int min = tim->tim_bitctl &~ 1; int max = tim->tim_len + min - 4; int tim_ucast = 0, tim_mcast = 0; /* * Only do this for unicast traffic in the TIM * The multicast traffic notification for * the scan notification stuff should occur * differently. */ if (min <= ix && ix <= max && isset(tim->tim_bitmap - min, aid)) { tim_ucast = 1; } /* * Do a separate notification * for the multicast bit being set. */ if (tim->tim_bitctl & 1) { tim_mcast = 1; } /* * If the TIM indicates there's traffic for * us then get us out of STA mode powersave. */ if (tim_ucast == 1) { /* * Wake us out of SLEEP state if we're * in it; and if we're doing bgscan * then wake us out of STA powersave. */ ieee80211_sta_tim_notify(vap, 1); /* * This is preventing us from * continuing a bgscan; because it * tricks the contbgscan() * routine to think there's always * traffic for us. * * I think we need both an RX and * TX ic_lastdata field. */ ic->ic_lastdata = ticks; } ni->ni_dtim_count = tim->tim_count; ni->ni_dtim_period = tim->tim_period; } if (scan.csa != NULL && (vap->iv_flags & IEEE80211_F_DOTH)) ieee80211_parse_csaparams(vap, scan.csa, wh); else if (ic->ic_flags & IEEE80211_F_CSAPENDING) { /* * No CSA ie or 11h disabled, but a channel * switch is pending; drop out so we aren't * stuck in CSA state. If the AP really is * moving we'll get a beacon miss and scan. */ IEEE80211_LOCK(ic); ieee80211_csa_cancelswitch(ic); IEEE80211_UNLOCK(ic); } /* * If scanning, pass the info to the scan module. * Otherwise, check if it's the right time to do * a background scan. Background scanning must * be enabled and we must not be operating in the * turbo phase of dynamic turbo mode. Then, * it's been a while since the last background * scan and if no data frames have come through * recently, kick off a scan. Note that this * is the mechanism by which a background scan * is started _and_ continued each time we * return on-channel to receive a beacon from * our ap. */ if (ic->ic_flags & IEEE80211_F_SCAN) { ieee80211_add_scan(vap, ic->ic_curchan, &scan, wh, subtype, rssi, nf); } else if (contbgscan(vap)) { ieee80211_bg_scan(vap, 0); } else if (startbgscan(vap)) { vap->iv_stats.is_scan_bg++; #if 0 /* wakeup if we are sleeing */ ieee80211_set_pwrsave(vap, 0); #endif ieee80211_bg_scan(vap, 0); } /* * Put the station to sleep if we haven't seen * traffic in a while. */ IEEE80211_LOCK(ic); ieee80211_sta_ps_timer_check(vap); IEEE80211_UNLOCK(ic); /* * If we've had a channel width change (eg HT20<->HT40) * then schedule a delayed driver notification. */ if (ht_state_change) ieee80211_update_chw(ic); return; } /* * If scanning, just pass information to the scan module. */ if (ic->ic_flags & IEEE80211_F_SCAN) { if (ic->ic_flags_ext & IEEE80211_FEXT_PROBECHAN) { /* * Actively scanning a channel marked passive; * send a probe request now that we know there * is 802.11 traffic present. * * XXX check if the beacon we recv'd gives * us what we need and suppress the probe req */ ieee80211_probe_curchan(vap, 1); ic->ic_flags_ext &= ~IEEE80211_FEXT_PROBECHAN; } ieee80211_add_scan(vap, ic->ic_curchan, &scan, wh, subtype, rssi, nf); return; } break; } case IEEE80211_FC0_SUBTYPE_AUTH: { uint16_t algo, seq, status; /* * auth frame format * [2] algorithm * [2] sequence * [2] status * [tlv*] challenge */ IEEE80211_VERIFY_LENGTH(efrm - frm, 6, return); algo = le16toh(*(uint16_t *)frm); seq = le16toh(*(uint16_t *)(frm + 2)); status = le16toh(*(uint16_t *)(frm + 4)); IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_AUTH, wh->i_addr2, "recv auth frame with algorithm %d seq %d", algo, seq); if (vap->iv_flags & IEEE80211_F_COUNTERM) { IEEE80211_DISCARD(vap, IEEE80211_MSG_AUTH | IEEE80211_MSG_CRYPTO, wh, "auth", "%s", "TKIP countermeasures enabled"); vap->iv_stats.is_rx_auth_countermeasures++; if (vap->iv_opmode == IEEE80211_M_HOSTAP) { ieee80211_send_error(ni, wh->i_addr2, IEEE80211_FC0_SUBTYPE_AUTH, IEEE80211_REASON_MIC_FAILURE); } return; } if (algo == IEEE80211_AUTH_ALG_SHARED) sta_auth_shared(ni, wh, frm + 6, efrm, rssi, nf, seq, status); else if (algo == IEEE80211_AUTH_ALG_OPEN) sta_auth_open(ni, wh, rssi, nf, seq, status); else { IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "auth", "unsupported alg %d", algo); vap->iv_stats.is_rx_auth_unsupported++; return; } break; } case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: { uint16_t capinfo, associd; uint16_t status; if (vap->iv_state != IEEE80211_S_ASSOC) { vap->iv_stats.is_rx_mgtdiscard++; return; } /* * asresp frame format * [2] capability information * [2] status * [2] association ID * [tlv] supported rates * [tlv] extended supported rates * [tlv] WME * [tlv] HT capabilities * [tlv] HT info */ IEEE80211_VERIFY_LENGTH(efrm - frm, 6, return); ni = vap->iv_bss; capinfo = le16toh(*(uint16_t *)frm); frm += 2; status = le16toh(*(uint16_t *)frm); frm += 2; if (status != 0) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ASSOC, wh->i_addr2, "%sassoc failed (reason %d)", ISREASSOC(subtype) ? "re" : "", status); vap->iv_stats.is_rx_auth_fail++; /* XXX */ return; } associd = le16toh(*(uint16_t *)frm); frm += 2; rates = xrates = wme = htcap = htinfo = NULL; while (efrm - frm > 1) { IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return); switch (*frm) { case IEEE80211_ELEMID_RATES: rates = frm; break; case IEEE80211_ELEMID_XRATES: xrates = frm; break; case IEEE80211_ELEMID_HTCAP: htcap = frm; break; case IEEE80211_ELEMID_HTINFO: htinfo = frm; break; case IEEE80211_ELEMID_VENDOR: if (iswmeoui(frm)) wme = frm; else if (vap->iv_flags_ht & IEEE80211_FHT_HTCOMPAT) { /* * Accept pre-draft HT ie's if the * standard ones have not been seen. */ if (ishtcapoui(frm)) { if (htcap == NULL) htcap = frm; } else if (ishtinfooui(frm)) { if (htinfo == NULL) htinfo = frm; } } /* XXX Atheros OUI support */ break; } frm += frm[1] + 2; } IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, return); if (xrates != NULL) IEEE80211_VERIFY_ELEMENT(xrates, IEEE80211_RATE_MAXSIZE - rates[1], return); rate = ieee80211_setup_rates(ni, rates, xrates, IEEE80211_F_JOIN | IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE | IEEE80211_F_DONEGO | IEEE80211_F_DODEL); if (rate & IEEE80211_RATE_BASIC) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ASSOC, wh->i_addr2, "%sassoc failed (rate set mismatch)", ISREASSOC(subtype) ? "re" : ""); vap->iv_stats.is_rx_assoc_norate++; ieee80211_new_state(vap, IEEE80211_S_SCAN, IEEE80211_SCAN_FAIL_STATUS); return; } ni->ni_capinfo = capinfo; ni->ni_associd = associd; if (ni->ni_jointime == 0) ni->ni_jointime = time_uptime; if (wme != NULL && ieee80211_parse_wmeparams(vap, wme, wh) >= 0) { ni->ni_flags |= IEEE80211_NODE_QOS; ieee80211_wme_updateparams(vap); } else ni->ni_flags &= ~IEEE80211_NODE_QOS; /* * Setup HT state according to the negotiation. * * NB: shouldn't need to check if HT use is enabled but some * ap's send back HT ie's even when we don't indicate we * are HT capable in our AssocReq. */ if (htcap != NULL && htinfo != NULL && (vap->iv_flags_ht & IEEE80211_FHT_HT)) { ieee80211_ht_node_init(ni); ieee80211_ht_updateparams(ni, htcap, htinfo); ieee80211_setup_htrates(ni, htcap, IEEE80211_F_JOIN | IEEE80211_F_DOBRS); ieee80211_setup_basic_htrates(ni, htinfo); ieee80211_node_setuptxparms(ni); ieee80211_ratectl_node_init(ni); } else { #ifdef IEEE80211_SUPPORT_SUPERG if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_ATH)) ieee80211_ff_node_init(ni); #endif } /* * Configure state now that we are associated. * * XXX may need different/additional driver callbacks? */ if (IEEE80211_IS_CHAN_A(ic->ic_curchan) || (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE)) { ic->ic_flags |= IEEE80211_F_SHPREAMBLE; ic->ic_flags &= ~IEEE80211_F_USEBARKER; } else { ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE; ic->ic_flags |= IEEE80211_F_USEBARKER; } ieee80211_set_shortslottime(ic, IEEE80211_IS_CHAN_A(ic->ic_curchan) || (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME)); /* * Honor ERP protection. * * NB: ni_erp should zero for non-11g operation. */ if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) && (ni->ni_erp & IEEE80211_ERP_USE_PROTECTION)) ic->ic_flags |= IEEE80211_F_USEPROT; else ic->ic_flags &= ~IEEE80211_F_USEPROT; IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, wh->i_addr2, "%sassoc success at aid %d: %s preamble, %s slot time%s%s%s%s%s%s%s%s", ISREASSOC(subtype) ? "re" : "", IEEE80211_NODE_AID(ni), ic->ic_flags&IEEE80211_F_SHPREAMBLE ? "short" : "long", ic->ic_flags&IEEE80211_F_SHSLOT ? "short" : "long", ic->ic_flags&IEEE80211_F_USEPROT ? ", protection" : "", ni->ni_flags & IEEE80211_NODE_QOS ? ", QoS" : "", ni->ni_flags & IEEE80211_NODE_HT ? (ni->ni_chw == 40 ? ", HT40" : ", HT20") : "", ni->ni_flags & IEEE80211_NODE_AMPDU ? " (+AMPDU)" : "", ni->ni_flags & IEEE80211_NODE_MIMO_RTS ? " (+SMPS-DYN)" : ni->ni_flags & IEEE80211_NODE_MIMO_PS ? " (+SMPS)" : "", ni->ni_flags & IEEE80211_NODE_RIFS ? " (+RIFS)" : "", IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF) ? ", fast-frames" : "", IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_TURBOP) ? ", turbo" : "" ); ieee80211_new_state(vap, IEEE80211_S_RUN, subtype); break; } case IEEE80211_FC0_SUBTYPE_DEAUTH: { uint16_t reason; if (vap->iv_state == IEEE80211_S_SCAN) { vap->iv_stats.is_rx_mgtdiscard++; return; } if (!IEEE80211_ADDR_EQ(wh->i_addr1, vap->iv_myaddr)) { /* NB: can happen when in promiscuous mode */ vap->iv_stats.is_rx_mgtdiscard++; break; } /* * deauth frame format * [2] reason */ IEEE80211_VERIFY_LENGTH(efrm - frm, 2, return); reason = le16toh(*(uint16_t *)frm); vap->iv_stats.is_rx_deauth++; vap->iv_stats.is_rx_deauth_code = reason; IEEE80211_NODE_STAT(ni, rx_deauth); IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, "recv deauthenticate (reason %d)", reason); ieee80211_new_state(vap, IEEE80211_S_AUTH, (reason << 8) | IEEE80211_FC0_SUBTYPE_DEAUTH); break; } case IEEE80211_FC0_SUBTYPE_DISASSOC: { uint16_t reason; if (vap->iv_state != IEEE80211_S_RUN && vap->iv_state != IEEE80211_S_ASSOC && vap->iv_state != IEEE80211_S_AUTH) { vap->iv_stats.is_rx_mgtdiscard++; return; } if (!IEEE80211_ADDR_EQ(wh->i_addr1, vap->iv_myaddr)) { /* NB: can happen when in promiscuous mode */ vap->iv_stats.is_rx_mgtdiscard++; break; } /* * disassoc frame format * [2] reason */ IEEE80211_VERIFY_LENGTH(efrm - frm, 2, return); reason = le16toh(*(uint16_t *)frm); vap->iv_stats.is_rx_disassoc++; vap->iv_stats.is_rx_disassoc_code = reason; IEEE80211_NODE_STAT(ni, rx_disassoc); IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni, "recv disassociate (reason %d)", reason); ieee80211_new_state(vap, IEEE80211_S_ASSOC, 0); break; } case IEEE80211_FC0_SUBTYPE_ACTION: case IEEE80211_FC0_SUBTYPE_ACTION_NOACK: if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr1) && !IEEE80211_IS_MULTICAST(wh->i_addr1)) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not for us"); vap->iv_stats.is_rx_mgtdiscard++; } else if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "wrong state %s", ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_rx_mgtdiscard++; } else { if (ieee80211_parse_action(ni, m0) == 0) (void)ic->ic_recv_action(ni, wh, frm, efrm); } break; case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: case IEEE80211_FC0_SUBTYPE_PROBE_REQ: case IEEE80211_FC0_SUBTYPE_ATIM: IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not handled"); vap->iv_stats.is_rx_mgtdiscard++; break; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "mgt", "subtype 0x%x not handled", subtype); vap->iv_stats.is_rx_badsubtype++; break; } #undef ISREASSOC #undef ISPROBE } static void sta_recv_ctl(struct ieee80211_node *ni, struct mbuf *m, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_BAR: ieee80211_recv_bar(ni, m); break; } } Index: head/sys/net80211/ieee80211_wds.c =================================================================== --- head/sys/net80211/ieee80211_wds.c (revision 282819) +++ head/sys/net80211/ieee80211_wds.c (revision 282820) @@ -1,800 +1,799 @@ /*- * Copyright (c) 2007-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #ifdef __FreeBSD__ __FBSDID("$FreeBSD$"); #endif /* * IEEE 802.11 WDS mode support. */ #include "opt_inet.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif static void wds_vattach(struct ieee80211vap *); static int wds_newstate(struct ieee80211vap *, enum ieee80211_state, int); static int wds_input(struct ieee80211_node *ni, struct mbuf *m, int, int); static void wds_recv_mgmt(struct ieee80211_node *, struct mbuf *, int subtype, int, int); void ieee80211_wds_attach(struct ieee80211com *ic) { ic->ic_vattach[IEEE80211_M_WDS] = wds_vattach; } void ieee80211_wds_detach(struct ieee80211com *ic) { } static void wds_vdetach(struct ieee80211vap *vap) { if (vap->iv_bss != NULL) { /* XXX locking? */ if (vap->iv_bss->ni_wdsvap == vap) vap->iv_bss->ni_wdsvap = NULL; } } static void wds_vattach(struct ieee80211vap *vap) { vap->iv_newstate = wds_newstate; vap->iv_input = wds_input; vap->iv_recv_mgmt = wds_recv_mgmt; vap->iv_opdetach = wds_vdetach; } static void wds_flush(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct mbuf *m, *next; int8_t rssi, nf; m = ieee80211_ageq_remove(&ic->ic_stageq, (void *)(uintptr_t) ieee80211_mac_hash(ic, ni->ni_macaddr)); if (m == NULL) return; IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_WDS, ni, "%s", "flush wds queue"); ic->ic_node_getsignal(ni, &rssi, &nf); for (; m != NULL; m = next) { next = m->m_nextpkt; m->m_nextpkt = NULL; ieee80211_input(ni, m, rssi, nf); } } static int ieee80211_create_wds(struct ieee80211vap *vap, struct ieee80211_channel *chan) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node_table *nt = &ic->ic_sta; struct ieee80211_node *ni, *obss; IEEE80211_DPRINTF(vap, IEEE80211_MSG_WDS, "%s: creating link to %s on channel %u\n", __func__, ether_sprintf(vap->iv_des_bssid), ieee80211_chan2ieee(ic, chan)); /* NB: vap create must specify the bssid for the link */ KASSERT(vap->iv_flags & IEEE80211_F_DESBSSID, ("no bssid")); /* NB: we should only be called on RUN transition */ KASSERT(vap->iv_state == IEEE80211_S_RUN, ("!RUN state")); if ((vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) == 0) { /* * Dynamic/non-legacy WDS. Reference the associated * station specified by the desired bssid setup at vap * create. Point ni_wdsvap at the WDS vap so 4-address * frames received through the associated AP vap will * be dispatched upward (e.g. to a bridge) as though * they arrived on the WDS vap. */ IEEE80211_NODE_LOCK(nt); obss = NULL; ni = ieee80211_find_node_locked(&ic->ic_sta, vap->iv_des_bssid); if (ni == NULL) { /* * Node went away before we could hookup. This * should be ok; no traffic will flow and a leave * event will be dispatched that should cause * the vap to be destroyed. */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_WDS, "%s: station %s went away\n", __func__, ether_sprintf(vap->iv_des_bssid)); /* XXX stat? */ } else if (ni->ni_wdsvap != NULL) { /* * Node already setup with a WDS vap; we cannot * allow multiple references so disallow. If * ni_wdsvap points at us that's ok; we should * do nothing anyway. */ /* XXX printf instead? */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_WDS, "%s: station %s in use with %s\n", __func__, ether_sprintf(vap->iv_des_bssid), ni->ni_wdsvap->iv_ifp->if_xname); /* XXX stat? */ } else { /* * Committed to new node, setup state. */ obss = vap->iv_bss; vap->iv_bss = ni; ni->ni_wdsvap = vap; } IEEE80211_NODE_UNLOCK(nt); if (obss != NULL) { /* NB: deferred to avoid recursive lock */ ieee80211_free_node(obss); } } else { /* * Legacy WDS vap setup. */ /* * The far end does not associate so we just create * create a new node and install it as the vap's * bss node. We must simulate an association and * authorize the port for traffic to flow. * XXX check if node already in sta table? */ ni = ieee80211_node_create_wds(vap, vap->iv_des_bssid, chan); if (ni != NULL) { obss = vap->iv_bss; vap->iv_bss = ieee80211_ref_node(ni); ni->ni_flags |= IEEE80211_NODE_AREF; if (obss != NULL) ieee80211_free_node(obss); /* give driver a chance to setup state like ni_txrate */ if (ic->ic_newassoc != NULL) ic->ic_newassoc(ni, 1); /* tell the authenticator about new station */ if (vap->iv_auth->ia_node_join != NULL) vap->iv_auth->ia_node_join(ni); if (ni->ni_authmode != IEEE80211_AUTH_8021X) ieee80211_node_authorize(ni); ieee80211_notify_node_join(ni, 1 /*newassoc*/); /* XXX inject l2uf frame */ } } /* * Flush any pending frames now that were setup. */ if (ni != NULL) wds_flush(ni); return (ni == NULL ? ENOENT : 0); } /* * Propagate multicast frames of an ap vap to all DWDS links. * The caller is assumed to have verified this frame is multicast. */ void ieee80211_dwds_mcast(struct ieee80211vap *vap0, struct mbuf *m) { struct ieee80211com *ic = vap0->iv_ic; const struct ether_header *eh = mtod(m, const struct ether_header *); struct ieee80211_node *ni; struct ieee80211vap *vap; struct ifnet *ifp; struct mbuf *mcopy; int err; KASSERT(ETHER_IS_MULTICAST(eh->ether_dhost), ("%s not mcast", ether_sprintf(eh->ether_dhost))); /* XXX locking */ TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { /* only DWDS vaps are interesting */ if (vap->iv_opmode != IEEE80211_M_WDS || (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY)) continue; /* if it came in this interface, don't send it back out */ ifp = vap->iv_ifp; if (ifp == m->m_pkthdr.rcvif) continue; /* * Duplicate the frame and send it. */ mcopy = m_copypacket(m, M_NOWAIT); if (mcopy == NULL) { if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); /* XXX stat + msg */ continue; } ni = ieee80211_find_txnode(vap, eh->ether_dhost); if (ni == NULL) { /* NB: ieee80211_find_txnode does stat+msg */ if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); m_freem(mcopy); continue; } /* calculate priority so drivers can find the tx queue */ if (ieee80211_classify(ni, mcopy)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_WDS, eh->ether_dhost, NULL, "%s", "classification failure"); vap->iv_stats.is_tx_classify++; if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); m_freem(mcopy); ieee80211_free_node(ni); continue; } BPF_MTAP(ifp, m); /* 802.3 tx */ /* * Encapsulate the packet in prep for transmission. */ mcopy = ieee80211_encap(vap, ni, mcopy); if (mcopy == NULL) { /* NB: stat+msg handled in ieee80211_encap */ ieee80211_free_node(ni); continue; } mcopy->m_flags |= M_MCAST; mcopy->m_pkthdr.rcvif = (void *) ni; err = ieee80211_parent_xmitpkt(ic, mcopy); if (err) { /* NB: IFQ_HANDOFF reclaims mbuf */ if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); ieee80211_free_node(ni); } else if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); } } /* * Handle DWDS discovery on receipt of a 4-address frame in * ap mode. Queue the frame and post an event for someone * to plumb the necessary WDS vap for this station. Frames * received prior to the vap set running will then be reprocessed * as if they were just received. */ void ieee80211_dwds_discover(struct ieee80211_node *ni, struct mbuf *m) { struct ieee80211com *ic = ni->ni_ic; /* * Save the frame with an aging interval 4 times * the listen interval specified by the station. * Frames that sit around too long are reclaimed * using this information. * XXX handle overflow? * XXX per/vap beacon interval? */ m->m_pkthdr.rcvif = (void *)(uintptr_t) ieee80211_mac_hash(ic, ni->ni_macaddr); (void) ieee80211_ageq_append(&ic->ic_stageq, m, ((ni->ni_intval * ic->ic_lintval) << 2) / 1024); ieee80211_notify_wds_discover(ni); } /* * IEEE80211_M_WDS vap state machine handler. */ static int wds_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; enum ieee80211_state ostate; int error; IEEE80211_LOCK_ASSERT(ic); ostate = vap->iv_state; IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate]); vap->iv_state = nstate; /* state transition */ callout_stop(&vap->iv_mgtsend); /* XXX callout_drain */ if (ostate != IEEE80211_S_SCAN) ieee80211_cancel_scan(vap); /* background scan */ ni = vap->iv_bss; /* NB: no reference held */ error = 0; switch (nstate) { case IEEE80211_S_INIT: switch (ostate) { case IEEE80211_S_SCAN: ieee80211_cancel_scan(vap); break; default: break; } if (ostate != IEEE80211_S_INIT) { /* NB: optimize INIT -> INIT case */ ieee80211_reset_bss(vap); } break; case IEEE80211_S_SCAN: switch (ostate) { case IEEE80211_S_INIT: ieee80211_check_scan_current(vap); break; default: break; } break; case IEEE80211_S_RUN: if (ostate == IEEE80211_S_INIT) { /* * Already have a channel; bypass the scan * and startup immediately. */ error = ieee80211_create_wds(vap, ic->ic_curchan); } break; default: break; } return error; } /* * Process a received frame. The node associated with the sender * should be supplied. If nothing was found in the node table then * the caller is assumed to supply a reference to iv_bss instead. * The RSSI and a timestamp are also supplied. The RSSI data is used * during AP scanning to select a AP to associate with; it can have * any units so long as values have consistent units and higher values * mean ``better signal''. The receive timestamp is currently not used * by the 802.11 layer. */ static int wds_input(struct ieee80211_node *ni, struct mbuf *m, int rssi, int nf) { -#define HAS_SEQ(type) ((type & 0x4) == 0) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ifnet *ifp = vap->iv_ifp; struct ieee80211_frame *wh; struct ieee80211_key *key; struct ether_header *eh; int hdrspace, need_tap = 1; /* mbuf need to be tapped. */ uint8_t dir, type, subtype, qos; uint16_t rxseq; if (m->m_flags & M_AMPDU_MPDU) { /* * Fastpath for A-MPDU reorder q resubmission. Frames * w/ M_AMPDU_MPDU marked have already passed through * here but were received out of order and been held on * the reorder queue. When resubmitted they are marked * with the M_AMPDU_MPDU flag and we can bypass most of * the normal processing. */ wh = mtod(m, struct ieee80211_frame *); type = IEEE80211_FC0_TYPE_DATA; dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK; subtype = IEEE80211_FC0_SUBTYPE_QOS; hdrspace = ieee80211_hdrspace(ic, wh); /* XXX optimize? */ goto resubmit_ampdu; } KASSERT(ni != NULL, ("null node")); type = -1; /* undefined */ if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "too short (1): len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } /* * Bit of a cheat here, we use a pointer for a 3-address * frame format but don't reference fields past outside * ieee80211_frame_min w/o first validating the data is * present. */ wh = mtod(m, struct ieee80211_frame *); if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) ni->ni_inact = ni->ni_inact_reload; if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "wrong version, fc %02x:%02x", wh->i_fc[0], wh->i_fc[1]); vap->iv_stats.is_rx_badversion++; goto err; } dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK; type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; /* NB: WDS vap's do not scan */ if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_addr4)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "too short (3): len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } /* NB: the TA is implicitly verified by finding the wds peer node */ if (!IEEE80211_ADDR_EQ(wh->i_addr1, vap->iv_myaddr) && !IEEE80211_ADDR_EQ(wh->i_addr1, ifp->if_broadcastaddr)) { /* not interested in */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, wh->i_addr1, NULL, "%s", "not to bss"); vap->iv_stats.is_rx_wrongbss++; goto out; } IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi); ni->ni_noise = nf; - if (HAS_SEQ(type)) { + if (IEEE80211_HAS_SEQ(type, subtype)) { uint8_t tid = ieee80211_gettid(wh); if (IEEE80211_QOS_HAS_SEQ(wh) && TID_TO_WME_AC(tid) >= WME_AC_VI) ic->ic_wme.wme_hipri_traffic++; rxseq = le16toh(*(uint16_t *)wh->i_seq); if (! ieee80211_check_rxseq(ni, wh)) { /* duplicate, discard */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, wh->i_addr1, "duplicate", "seqno <%u,%u> fragno <%u,%u> tid %u", rxseq >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[tid] >> IEEE80211_SEQ_SEQ_SHIFT, rxseq & IEEE80211_SEQ_FRAG_MASK, ni->ni_rxseqs[tid] & IEEE80211_SEQ_FRAG_MASK, tid); vap->iv_stats.is_rx_dup++; IEEE80211_NODE_STAT(ni, rx_dup); goto out; } ni->ni_rxseqs[tid] = rxseq; } switch (type) { case IEEE80211_FC0_TYPE_DATA: hdrspace = ieee80211_hdrspace(ic, wh); if (m->m_len < hdrspace && (m = m_pullup(m, hdrspace)) == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "data too short: expecting %u", hdrspace); vap->iv_stats.is_rx_tooshort++; goto out; /* XXX */ } if (dir != IEEE80211_FC1_DIR_DSTODS) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "incorrect dir 0x%x", dir); vap->iv_stats.is_rx_wrongdir++; goto out; } /* * Only legacy WDS traffic should take this path. */ if ((vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) == 0) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "%s", "not legacy wds"); vap->iv_stats.is_rx_wrongdir++;/*XXX*/ goto out; } /* * Handle A-MPDU re-ordering. If the frame is to be * processed directly then ieee80211_ampdu_reorder * will return 0; otherwise it has consumed the mbuf * and we should do nothing more with it. */ if ((m->m_flags & M_AMPDU) && ieee80211_ampdu_reorder(ni, m) != 0) { m = NULL; goto out; } resubmit_ampdu: /* * Handle privacy requirements. Note that we * must not be preempted from here until after * we (potentially) call ieee80211_crypto_demic; * otherwise we may violate assumptions in the * crypto cipher modules used to do delayed update * of replay sequence numbers. */ if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) { /* * Discard encrypted frames when privacy is off. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "WEP", "%s", "PRIVACY off"); vap->iv_stats.is_rx_noprivacy++; IEEE80211_NODE_STAT(ni, rx_noprivacy); goto out; } key = ieee80211_crypto_decap(ni, m, hdrspace); if (key == NULL) { /* NB: stats+msgs handled in crypto_decap */ IEEE80211_NODE_STAT(ni, rx_wepfail); goto out; } wh = mtod(m, struct ieee80211_frame *); wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED; } else { /* XXX M_WEP and IEEE80211_F_PRIVACY */ key = NULL; } /* * Save QoS bits for use below--before we strip the header. */ if (subtype == IEEE80211_FC0_SUBTYPE_QOS) { qos = (dir == IEEE80211_FC1_DIR_DSTODS) ? ((struct ieee80211_qosframe_addr4 *)wh)->i_qos[0] : ((struct ieee80211_qosframe *)wh)->i_qos[0]; } else qos = 0; /* * Next up, any fragmentation. */ if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { m = ieee80211_defrag(ni, m, hdrspace); if (m == NULL) { /* Fragment dropped or frame not complete yet */ goto out; } } wh = NULL; /* no longer valid, catch any uses */ /* * Next strip any MSDU crypto bits. */ if (key != NULL && !ieee80211_crypto_demic(vap, key, m, 0)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, ni->ni_macaddr, "data", "%s", "demic error"); vap->iv_stats.is_rx_demicfail++; IEEE80211_NODE_STAT(ni, rx_demicfail); goto out; } /* copy to listener after decrypt */ if (ieee80211_radiotap_active_vap(vap)) ieee80211_radiotap_rx(vap, m); need_tap = 0; /* * Finally, strip the 802.11 header. */ m = ieee80211_decap(vap, m, hdrspace); if (m == NULL) { /* XXX mask bit to check for both */ /* don't count Null data frames as errors */ if (subtype == IEEE80211_FC0_SUBTYPE_NODATA || subtype == IEEE80211_FC0_SUBTYPE_QOS_NULL) goto out; IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, ni->ni_macaddr, "data", "%s", "decap error"); vap->iv_stats.is_rx_decap++; IEEE80211_NODE_STAT(ni, rx_decap); goto err; } eh = mtod(m, struct ether_header *); if (!ieee80211_node_is_authorized(ni)) { /* * Deny any non-PAE frames received prior to * authorization. For open/shared-key * authentication the port is mark authorized * after authentication completes. For 802.1x * the port is not marked authorized by the * authenticator until the handshake has completed. */ if (eh->ether_type != htons(ETHERTYPE_PAE)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, eh->ether_shost, "data", "unauthorized port: ether type 0x%x len %u", eh->ether_type, m->m_pkthdr.len); vap->iv_stats.is_rx_unauth++; IEEE80211_NODE_STAT(ni, rx_unauth); goto err; } } else { /* * When denying unencrypted frames, discard * any non-PAE frames received without encryption. */ if ((vap->iv_flags & IEEE80211_F_DROPUNENC) && (key == NULL && (m->m_flags & M_WEP) == 0) && eh->ether_type != htons(ETHERTYPE_PAE)) { /* * Drop unencrypted frames. */ vap->iv_stats.is_rx_unencrypted++; IEEE80211_NODE_STAT(ni, rx_unencrypted); goto out; } } /* XXX require HT? */ if (qos & IEEE80211_QOS_AMSDU) { m = ieee80211_decap_amsdu(ni, m); if (m == NULL) return IEEE80211_FC0_TYPE_DATA; } else { #ifdef IEEE80211_SUPPORT_SUPERG m = ieee80211_decap_fastframe(vap, ni, m); if (m == NULL) return IEEE80211_FC0_TYPE_DATA; #endif } ieee80211_deliver_data(vap, ni, m); return IEEE80211_FC0_TYPE_DATA; case IEEE80211_FC0_TYPE_MGT: vap->iv_stats.is_rx_mgmt++; IEEE80211_NODE_STAT(ni, rx_mgmt); if (dir != IEEE80211_FC1_DIR_NODS) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "incorrect dir 0x%x", dir); vap->iv_stats.is_rx_wrongdir++; goto err; } if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "mgt", "too short: len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } #ifdef IEEE80211_DEBUG if (ieee80211_msg_debug(vap) || ieee80211_msg_dumppkts(vap)) { if_printf(ifp, "received %s from %s rssi %d\n", ieee80211_mgt_subtype_name[subtype >> IEEE80211_FC0_SUBTYPE_SHIFT], ether_sprintf(wh->i_addr2), rssi); } #endif if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "WEP set but not permitted"); vap->iv_stats.is_rx_mgtdiscard++; /* XXX */ goto out; } vap->iv_recv_mgmt(ni, m, subtype, rssi, nf); goto out; case IEEE80211_FC0_TYPE_CTL: vap->iv_stats.is_rx_ctl++; IEEE80211_NODE_STAT(ni, rx_ctrl); goto out; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "bad", "frame type 0x%x", type); /* should not come here */ break; } err: if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); out: if (m != NULL) { if (need_tap && ieee80211_radiotap_active_vap(vap)) ieee80211_radiotap_rx(vap, m); m_freem(m); } return type; } static void wds_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0, int subtype, int rssi, int nf) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; u_int8_t *frm, *efrm; wh = mtod(m0, struct ieee80211_frame *); frm = (u_int8_t *)&wh[1]; efrm = mtod(m0, u_int8_t *) + m0->m_len; switch (subtype) { case IEEE80211_FC0_SUBTYPE_ACTION: case IEEE80211_FC0_SUBTYPE_ACTION_NOACK: if (ni == vap->iv_bss) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "unknown node"); vap->iv_stats.is_rx_mgtdiscard++; } else if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr1)) { /* NB: not interested in multicast frames. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not for us"); vap->iv_stats.is_rx_mgtdiscard++; } else if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "wrong state %s", ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_rx_mgtdiscard++; } else { if (ieee80211_parse_action(ni, m0) == 0) (void)ic->ic_recv_action(ni, wh, frm, efrm); } break; case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: case IEEE80211_FC0_SUBTYPE_PROBE_REQ: case IEEE80211_FC0_SUBTYPE_PROBE_RESP: case IEEE80211_FC0_SUBTYPE_BEACON: case IEEE80211_FC0_SUBTYPE_ATIM: case IEEE80211_FC0_SUBTYPE_DISASSOC: case IEEE80211_FC0_SUBTYPE_AUTH: case IEEE80211_FC0_SUBTYPE_DEAUTH: IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not handled"); vap->iv_stats.is_rx_mgtdiscard++; break; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "mgt", "subtype 0x%x not handled", subtype); vap->iv_stats.is_rx_badsubtype++; break; } }