Index: head/sys/net80211/ieee80211_scan.c =================================================================== --- head/sys/net80211/ieee80211_scan.c (revision 282704) +++ head/sys/net80211/ieee80211_scan.c (revision 282705) @@ -1,740 +1,666 @@ /*- * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 scanning support. */ #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include /* XXX until it's implemented as attach ops */ #include #include /* * Roaming-related defaults. RSSI thresholds are as returned by the * driver (.5dBm). Transmit rate thresholds are IEEE rate codes (i.e * .5M units) or MCS. */ /* rssi thresholds */ #define ROAM_RSSI_11A_DEFAULT 14 /* 11a bss */ #define ROAM_RSSI_11B_DEFAULT 14 /* 11b bss */ #define ROAM_RSSI_11BONLY_DEFAULT 14 /* 11b-only bss */ /* transmit rate thresholds */ #define ROAM_RATE_11A_DEFAULT 2*12 /* 11a bss */ #define ROAM_RATE_11B_DEFAULT 2*5 /* 11b bss */ #define ROAM_RATE_11BONLY_DEFAULT 2*1 /* 11b-only bss */ #define ROAM_RATE_HALF_DEFAULT 2*6 /* half-width 11a/g bss */ #define ROAM_RATE_QUARTER_DEFAULT 2*3 /* quarter-width 11a/g bss */ #define ROAM_MCS_11N_DEFAULT (1 | IEEE80211_RATE_MCS) /* 11n bss */ void ieee80211_scan_attach(struct ieee80211com *ic) { /* * For now, the swscan module does both the * allocation (so it can pad it) and sets up the net80211 * bits. * * I'll split this stuff later. */ ieee80211_swscan_attach(ic); } void ieee80211_scan_detach(struct ieee80211com *ic) { /* * Ideally we'd do the ss_ops detach call here; * but then ieee80211_swscan_detach would need * to be split in two. * * I'll do that later. */ ieee80211_swscan_detach(ic); } static const struct ieee80211_roamparam defroam[IEEE80211_MODE_MAX] = { [IEEE80211_MODE_11A] = { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_11G] = { .rssi = ROAM_RSSI_11B_DEFAULT, .rate = ROAM_RATE_11B_DEFAULT }, [IEEE80211_MODE_11B] = { .rssi = ROAM_RSSI_11BONLY_DEFAULT, .rate = ROAM_RATE_11BONLY_DEFAULT }, [IEEE80211_MODE_TURBO_A]= { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_TURBO_G]= { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_STURBO_A]={ .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_11A_DEFAULT }, [IEEE80211_MODE_HALF] = { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_HALF_DEFAULT }, [IEEE80211_MODE_QUARTER]= { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_RATE_QUARTER_DEFAULT }, [IEEE80211_MODE_11NA] = { .rssi = ROAM_RSSI_11A_DEFAULT, .rate = ROAM_MCS_11N_DEFAULT }, [IEEE80211_MODE_11NG] = { .rssi = ROAM_RSSI_11B_DEFAULT, .rate = ROAM_MCS_11N_DEFAULT }, }; void ieee80211_scan_vattach(struct ieee80211vap *vap) { vap->iv_bgscanidle = (IEEE80211_BGSCAN_IDLE_DEFAULT*1000)/hz; vap->iv_bgscanintvl = IEEE80211_BGSCAN_INTVAL_DEFAULT*hz; vap->iv_scanvalid = IEEE80211_SCAN_VALID_DEFAULT*hz; vap->iv_roaming = IEEE80211_ROAMING_AUTO; memcpy(vap->iv_roamparms, defroam, sizeof(defroam)); ieee80211_swscan_vattach(vap); } void ieee80211_scan_vdetach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_LOCK(ic); ss = ic->ic_scan; ieee80211_swscan_vdetach(vap); if (ss != NULL && ss->ss_vap == vap) { if (ss->ss_ops != NULL) { ss->ss_ops->scan_detach(ss); ss->ss_ops = NULL; } ss->ss_vap = NULL; } IEEE80211_UNLOCK(ic); } /* * Simple-minded scanner module support. */ static const char *scan_modnames[IEEE80211_OPMODE_MAX] = { "wlan_scan_sta", /* IEEE80211_M_IBSS */ "wlan_scan_sta", /* IEEE80211_M_STA */ "wlan_scan_wds", /* IEEE80211_M_WDS */ "wlan_scan_sta", /* IEEE80211_M_AHDEMO */ "wlan_scan_ap", /* IEEE80211_M_HOSTAP */ "wlan_scan_monitor", /* IEEE80211_M_MONITOR */ "wlan_scan_sta", /* IEEE80211_M_MBSS */ }; static const struct ieee80211_scanner *scanners[IEEE80211_OPMODE_MAX]; const struct ieee80211_scanner * ieee80211_scanner_get(enum ieee80211_opmode mode) { if (mode >= IEEE80211_OPMODE_MAX) return NULL; if (scanners[mode] == NULL) ieee80211_load_module(scan_modnames[mode]); return scanners[mode]; } void ieee80211_scanner_register(enum ieee80211_opmode mode, const struct ieee80211_scanner *scan) { if (mode >= IEEE80211_OPMODE_MAX) return; scanners[mode] = scan; } void ieee80211_scanner_unregister(enum ieee80211_opmode mode, const struct ieee80211_scanner *scan) { if (mode >= IEEE80211_OPMODE_MAX) return; if (scanners[mode] == scan) scanners[mode] = NULL; } void ieee80211_scanner_unregister_all(const struct ieee80211_scanner *scan) { int m; for (m = 0; m < IEEE80211_OPMODE_MAX; m++) if (scanners[m] == scan) scanners[m] = NULL; } /* * Update common scanner state to reflect the current * operating mode. This is called when the state machine * is transitioned to RUN state w/o scanning--e.g. when * operating in monitor mode. The purpose of this is to * ensure later callbacks find ss_ops set to properly * reflect current operating mode. */ void ieee80211_scan_update_locked(struct ieee80211vap *vap, const struct ieee80211_scanner *scan) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); #ifdef IEEE80211_DEBUG if (ss->ss_vap != vap || ss->ss_ops != scan) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: current scanner is <%s:%s>, switch to <%s:%s>\n", __func__, ss->ss_vap != NULL ? ss->ss_vap->iv_ifp->if_xname : "none", ss->ss_vap != NULL ? ieee80211_opmode_name[ss->ss_vap->iv_opmode] : "none", vap->iv_ifp->if_xname, ieee80211_opmode_name[vap->iv_opmode]); } #endif ss->ss_vap = vap; if (ss->ss_ops != scan) { /* * Switch scanners; detach old, attach new. Special * case where a single scan module implements multiple * policies by using different scan ops but a common * core. We assume if the old and new attach methods * are identical then it's ok to just change ss_ops * and not flush the internal state of the module. */ if (scan == NULL || ss->ss_ops == NULL || ss->ss_ops->scan_attach != scan->scan_attach) { if (ss->ss_ops != NULL) ss->ss_ops->scan_detach(ss); if (scan != NULL && !scan->scan_attach(ss)) { /* XXX attach failure */ /* XXX stat+msg */ scan = NULL; } } ss->ss_ops = scan; } } void ieee80211_scan_dump_channels(const struct ieee80211_scan_state *ss) { struct ieee80211com *ic = ss->ss_ic; const char *sep; int i; sep = ""; for (i = ss->ss_next; i < ss->ss_last; i++) { const struct ieee80211_channel *c = ss->ss_chans[i]; printf("%s%u%c", sep, ieee80211_chan2ieee(ic, c), ieee80211_channel_type_char(c)); sep = ", "; } } #ifdef IEEE80211_DEBUG void ieee80211_scan_dump(struct ieee80211_scan_state *ss) { struct ieee80211vap *vap = ss->ss_vap; if_printf(vap->iv_ifp, "scan set "); ieee80211_scan_dump_channels(ss); printf(" dwell min %lums max %lums\n", ticks_to_msecs(ss->ss_mindwell), ticks_to_msecs(ss->ss_maxdwell)); } #endif /* IEEE80211_DEBUG */ void ieee80211_scan_copy_ssid(struct ieee80211vap *vap, struct ieee80211_scan_state *ss, int nssid, const struct ieee80211_scan_ssid ssids[]) { if (nssid > IEEE80211_SCAN_MAX_SSID) { /* XXX printf */ IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: too many ssid %d, ignoring all of them\n", __func__, nssid); return; } memcpy(ss->ss_ssid, ssids, nssid * sizeof(ssids[0])); ss->ss_nssid = nssid; } /* * Start a scan unless one is already going. */ int -ieee80211_start_scan_locked(const struct ieee80211_scanner *scan, - struct ieee80211vap *vap, int flags, u_int duration, - u_int mindwell, u_int maxdwell, - u_int nssid, const struct ieee80211_scan_ssid ssids[]) -{ - struct ieee80211com *ic = vap->iv_ic; - struct ieee80211_scan_state *ss = ic->ic_scan; - - IEEE80211_LOCK_ASSERT(ic); - - if (ic->ic_flags & IEEE80211_F_CSAPENDING) { - IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, - "%s: scan inhibited by pending channel change\n", __func__); - } else if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { - IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, - "%s: %s scan, duration %u mindwell %u maxdwell %u, desired mode %s, %s%s%s%s%s%s\n" - , __func__ - , flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive" - , duration, mindwell, maxdwell - , ieee80211_phymode_name[vap->iv_des_mode] - , flags & IEEE80211_SCAN_FLUSH ? "flush" : "append" - , flags & IEEE80211_SCAN_NOPICK ? ", nopick" : "" - , flags & IEEE80211_SCAN_NOJOIN ? ", nojoin" : "" - , flags & IEEE80211_SCAN_NOBCAST ? ", nobcast" : "" - , flags & IEEE80211_SCAN_PICK1ST ? ", pick1st" : "" - , flags & IEEE80211_SCAN_ONCE ? ", once" : "" - ); - - ieee80211_scan_update_locked(vap, scan); - if (ss->ss_ops != NULL) { - if ((flags & IEEE80211_SCAN_NOSSID) == 0) - ieee80211_scan_copy_ssid(vap, ss, nssid, ssids); - - /* NB: top 4 bits for internal use */ - ss->ss_flags = flags & 0xfff; - if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) - vap->iv_stats.is_scan_active++; - else - vap->iv_stats.is_scan_passive++; - if (flags & IEEE80211_SCAN_FLUSH) - ss->ss_ops->scan_flush(ss); - if (flags & IEEE80211_SCAN_BGSCAN) - ic->ic_flags_ext |= IEEE80211_FEXT_BGSCAN; - - /* Set duration for this particular scan */ - ieee80211_swscan_set_scan_duration(vap, duration); - - ss->ss_next = 0; - ss->ss_mindwell = mindwell; - ss->ss_maxdwell = maxdwell; - /* NB: scan_start must be before the scan runtask */ - ss->ss_ops->scan_start(ss, vap); -#ifdef IEEE80211_DEBUG - if (ieee80211_msg_scan(vap)) - ieee80211_scan_dump(ss); -#endif /* IEEE80211_DEBUG */ - ic->ic_flags |= IEEE80211_F_SCAN; - - /* Start scan task */ - ieee80211_swscan_run_scan_task(vap); - } - return 1; - } else { - IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, - "%s: %s scan already in progress\n", __func__, - ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); - } - return 0; -} - -/* - * Start a scan unless one is already going. - */ -int ieee80211_start_scan(struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { const struct ieee80211_scanner *scan; scan = ieee80211_scanner_get(vap->iv_opmode); if (scan == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no scanner support for %s mode\n", __func__, ieee80211_opmode_name[vap->iv_opmode]); /* XXX stat */ return 0; } /* XXX ops */ return ieee80211_swscan_start_scan(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); } /* * Check the scan cache for an ap/channel to use; if that * fails then kick off a new scan. */ int ieee80211_check_scan(struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; const struct ieee80211_scanner *scan; int result; scan = ieee80211_scanner_get(vap->iv_opmode); if (scan == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no scanner support for %s mode\n", __func__, vap->iv_opmode); /* XXX stat */ return 0; } /* * Check if there's a list of scan candidates already. * XXX want more than the ap we're currently associated with */ IEEE80211_LOCK(ic); IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan, %s%s%s%s%s\n" , __func__ , flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive" , flags & IEEE80211_SCAN_FLUSH ? "flush" : "append" , flags & IEEE80211_SCAN_NOPICK ? ", nopick" : "" , flags & IEEE80211_SCAN_NOJOIN ? ", nojoin" : "" , flags & IEEE80211_SCAN_PICK1ST ? ", pick1st" : "" , flags & IEEE80211_SCAN_ONCE ? ", once" : "" ); if (ss->ss_ops != scan) { /* XXX re-use cache contents? e.g. adhoc<->sta */ flags |= IEEE80211_SCAN_FLUSH; } /* * XXX TODO: separate things out a bit better. * XXX TODO: ops */ ieee80211_scan_update_locked(vap, scan); result = ieee80211_swscan_check_scan(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); IEEE80211_UNLOCK(ic); return (result); } /* * Check the scan cache for an ap/channel to use; if that fails * then kick off a scan using the current settings. */ int ieee80211_check_scan_current(struct ieee80211vap *vap) { return ieee80211_check_scan(vap, IEEE80211_SCAN_ACTIVE, IEEE80211_SCAN_FOREVER, 0, 0, vap->iv_des_nssid, vap->iv_des_ssid); } /* * Restart a previous scan. If the previous scan completed * then we start again using the existing channel list. */ int ieee80211_bg_scan(struct ieee80211vap *vap, int flags) { const struct ieee80211_scanner *scan; // IEEE80211_UNLOCK_ASSERT(sc); scan = ieee80211_scanner_get(vap->iv_opmode); if (scan == NULL) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no scanner support for %s mode\n", __func__, vap->iv_opmode); /* XXX stat */ return 0; } /* * XXX TODO: pull apart the bgscan logic into whatever * belongs here and whatever belongs in the software * scanner. * * XXX TODO: ops */ return (ieee80211_swscan_bg_scan(scan, vap, flags)); } /* * Cancel any scan currently going on for the specified vap. */ void ieee80211_cancel_scan(struct ieee80211vap *vap) { /* XXX TODO: ops */ ieee80211_swscan_cancel_scan(vap); } /* * Cancel any scan currently going on. */ void ieee80211_cancel_anyscan(struct ieee80211vap *vap) { /* XXX TODO: ops */ ieee80211_swscan_cancel_anyscan(vap); } /* * Public access to scan_next for drivers that manage * scanning themselves (e.g. for firmware-based devices). */ void ieee80211_scan_next(struct ieee80211vap *vap) { /* XXX TODO: ops */ ieee80211_swscan_scan_next(vap); } /* * Public access to scan_next for drivers that are not able to scan single * channels (e.g. for firmware-based devices). */ void ieee80211_scan_done(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__); IEEE80211_LOCK(ic); ss = ic->ic_scan; ss->ss_next = ss->ss_last; /* all channels are complete */ /* XXX TODO: ops */ ieee80211_swscan_scan_done(vap); IEEE80211_UNLOCK(ic); } /* * Probe the curent channel, if allowed, while scanning. * If the channel is not marked passive-only then send * a probe request immediately. Otherwise mark state and * listen for beacons on the channel; if we receive something * then we'll transmit a probe request. */ void ieee80211_probe_curchan(struct ieee80211vap *vap, int force) { struct ieee80211com *ic = vap->iv_ic; if ((ic->ic_curchan->ic_flags & IEEE80211_CHAN_PASSIVE) && !force) { ic->ic_flags_ext |= IEEE80211_FEXT_PROBECHAN; return; } /* XXX TODO: ops */ ieee80211_swscan_probe_curchan(vap, force); } #ifdef IEEE80211_DEBUG static void dump_country(const uint8_t *ie) { const struct ieee80211_country_ie *cie = (const struct ieee80211_country_ie *) ie; int i, nbands, schan, nchan; if (cie->len < 3) { printf(" ", cie->len); return; } printf(" country [%c%c%c", cie->cc[0], cie->cc[1], cie->cc[2]); nbands = (cie->len - 3) / sizeof(cie->band[0]); for (i = 0; i < nbands; i++) { schan = cie->band[i].schan; nchan = cie->band[i].nchan; if (nchan != 1) printf(" %u-%u,%u", schan, schan + nchan-1, cie->band[i].maxtxpwr); else printf(" %u,%u", schan, cie->band[i].maxtxpwr); } printf("]"); } void ieee80211_scan_dump_probe_beacon(uint8_t subtype, int isnew, const uint8_t mac[IEEE80211_ADDR_LEN], const struct ieee80211_scanparams *sp, int rssi) { printf("[%s] %s%s on chan %u (bss chan %u) ", ether_sprintf(mac), isnew ? "new " : "", ieee80211_mgt_subtype_name[subtype >> IEEE80211_FC0_SUBTYPE_SHIFT], sp->chan, sp->bchan); ieee80211_print_essid(sp->ssid + 2, sp->ssid[1]); printf(" rssi %d\n", rssi); if (isnew) { printf("[%s] caps 0x%x bintval %u erp 0x%x", ether_sprintf(mac), sp->capinfo, sp->bintval, sp->erp); if (sp->country != NULL) dump_country(sp->country); printf("\n"); } } #endif /* IEEE80211_DEBUG */ /* * Process a beacon or probe response frame. */ void ieee80211_add_scan(struct ieee80211vap *vap, const struct ieee80211_scanparams *sp, const struct ieee80211_frame *wh, int subtype, int rssi, int noise) { return (ieee80211_swscan_add_scan(vap, sp, wh, subtype, rssi, noise)); } /* * Timeout/age scan cache entries; called from sta timeout * timer (XXX should be self-contained). */ void ieee80211_scan_timeout(struct ieee80211com *ic) { struct ieee80211_scan_state *ss = ic->ic_scan; if (ss->ss_ops != NULL) ss->ss_ops->scan_age(ss); } /* * Mark a scan cache entry after a successful associate. */ void ieee80211_scan_assoc_success(struct ieee80211vap *vap, const uint8_t mac[]) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_SCAN, mac, "%s", __func__); ss->ss_ops->scan_assoc_success(ss, mac); } } /* * Demerit a scan cache entry after failing to associate. */ void ieee80211_scan_assoc_fail(struct ieee80211vap *vap, const uint8_t mac[], int reason) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL) { IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_SCAN, mac, "%s: reason %u", __func__, reason); ss->ss_ops->scan_assoc_fail(ss, mac, reason); } } /* * Iterate over the contents of the scan cache. */ void ieee80211_scan_iterate(struct ieee80211vap *vap, ieee80211_scan_iter_func *f, void *arg) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL) ss->ss_ops->scan_iterate(ss, f, arg); } /* * Flush the contents of the scan cache. */ void ieee80211_scan_flush(struct ieee80211vap *vap) { struct ieee80211_scan_state *ss = vap->iv_ic->ic_scan; if (ss->ss_ops != NULL && ss->ss_vap == vap) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s\n", __func__); ss->ss_ops->scan_flush(ss); } } /* * Check the scan cache for an ap/channel to use; if that * fails then kick off a new scan. */ struct ieee80211_channel * ieee80211_scan_pickchannel(struct ieee80211com *ic, int flags) { struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); if (ss == NULL || ss->ss_ops == NULL || ss->ss_vap == NULL) { /* XXX printf? */ return NULL; } if (ss->ss_ops->scan_pickchan == NULL) { IEEE80211_DPRINTF(ss->ss_vap, IEEE80211_MSG_SCAN, "%s: scan module does not support picking a channel, " "opmode %s\n", __func__, ss->ss_vap->iv_opmode); return NULL; } return ss->ss_ops->scan_pickchan(ss, flags); } Index: head/sys/net80211/ieee80211_scan.h =================================================================== --- head/sys/net80211/ieee80211_scan.h (revision 282704) +++ head/sys/net80211/ieee80211_scan.h (revision 282705) @@ -1,316 +1,312 @@ /*- * Copyright (c) 2005-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _NET80211_IEEE80211_SCAN_H_ #define _NET80211_IEEE80211_SCAN_H_ /* * 802.11 scanning support. * * Scanning is the procedure by which a station locates a bss to join * (infrastructure/ibss mode), or a channel to use (when operating as * an ap or ibss master). Scans are either "active" or "passive". An * active scan causes one or more probe request frames to be sent on * visiting each channel. A passive request causes each channel in the * scan set to be visited but no frames to be transmitted; the station * only listens for traffic. Note that active scanning may still need * to listen for traffic before sending probe request frames depending * on regulatory constraints; the 802.11 layer handles this by generating * a callback when scanning on a ``passive channel'' when the * IEEE80211_FEXT_PROBECHAN flag is set. * * A scan operation involves constructing a set of channels to inspect * (the scan set), visiting each channel and collecting information * (e.g. what bss are present), and then analyzing the results to make * decisions like which bss to join. This process needs to be as fast * as possible so we do things like intelligently construct scan sets * and dwell on a channel only as long as necessary. The scan code also * maintains a cache of recent scan results and uses it to bypass scanning * whenever possible. The scan cache is also used to enable roaming * between access points when operating in infrastructure mode. * * Scanning is handled with pluggable modules that implement "policy" * per-operating mode. The core scanning support provides an * instrastructure to support these modules and exports a common api * to the rest of the 802.11 layer. Policy modules decide what * channels to visit, what state to record to make decisions (e.g. ap * mode scanning for auto channel selection keeps significantly less * state than sta mode scanning for an ap to associate to), and selects * the final station/channel to return as the result of a scan. * * Scanning is done synchronously when initially bringing a vap to an * operational state and optionally in the background to maintain the * scan cache for doing roaming and rogue ap monitoring. Scanning is * not tied to the 802.11 state machine that governs vaps though there * is linkage to the IEEE80211_SCAN state. Only one vap at a time may * be scanning; this scheduling policy is handled in ieee80211_new_state * and is invisible to the scanning code. */ #define IEEE80211_SCAN_MAX IEEE80211_CHAN_MAX struct ieee80211_scanner; /* scan policy state */ struct ieee80211_scan_ssid { int len; /* length in bytes */ uint8_t ssid[IEEE80211_NWID_LEN]; /* ssid contents */ }; #define IEEE80211_SCAN_MAX_SSID 1 /* max # ssid's to probe */ /* * Scan state visible to the 802.11 layer. Scan parameters and * results are stored in this data structure. The ieee80211_scan_state * structure is extended with space that is maintained private to * the core scanning support. We allocate one instance and link it * to the ieee80211com structure; then share it between all associated * vaps. We could allocate multiple of these, e.g. to hold multiple * scan results, but this is sufficient for current needs. */ struct ieee80211_scan_state { struct ieee80211vap *ss_vap; struct ieee80211com *ss_ic; const struct ieee80211_scanner *ss_ops; /* policy hookup, see below */ void *ss_priv; /* scanner private state */ uint16_t ss_flags; #define IEEE80211_SCAN_NOPICK 0x0001 /* scan only, no selection */ #define IEEE80211_SCAN_ACTIVE 0x0002 /* active scan (probe req) */ #define IEEE80211_SCAN_PICK1ST 0x0004 /* ``hey sailor'' mode */ #define IEEE80211_SCAN_BGSCAN 0x0008 /* bg scan, exit ps at end */ #define IEEE80211_SCAN_ONCE 0x0010 /* do one complete pass */ #define IEEE80211_SCAN_NOBCAST 0x0020 /* no broadcast probe req */ #define IEEE80211_SCAN_NOJOIN 0x0040 /* no auto-sequencing */ #define IEEE80211_SCAN_GOTPICK 0x1000 /* got candidate, can stop */ uint8_t ss_nssid; /* # ssid's to probe/match */ struct ieee80211_scan_ssid ss_ssid[IEEE80211_SCAN_MAX_SSID]; /* ssid's to probe/match */ /* ordered channel set */ struct ieee80211_channel *ss_chans[IEEE80211_SCAN_MAX]; uint16_t ss_next; /* ix of next chan to scan */ uint16_t ss_last; /* ix+1 of last chan to scan */ unsigned long ss_mindwell; /* min dwell on channel */ unsigned long ss_maxdwell; /* max dwell on channel */ }; /* * The upper 16 bits of the flags word is used to communicate * information to the scanning code that is NOT recorded in * ss_flags. It might be better to split this stuff out into * a separate variable to avoid confusion. */ #define IEEE80211_SCAN_FLUSH 0x00010000 /* flush candidate table */ #define IEEE80211_SCAN_NOSSID 0x80000000 /* don't update ssid list */ struct ieee80211com; void ieee80211_scan_attach(struct ieee80211com *); void ieee80211_scan_detach(struct ieee80211com *); void ieee80211_scan_vattach(struct ieee80211vap *); void ieee80211_scan_vdetach(struct ieee80211vap *); void ieee80211_scan_dump_channels(const struct ieee80211_scan_state *); #define IEEE80211_SCAN_FOREVER 0x7fffffff int ieee80211_start_scan(struct ieee80211vap *, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]); int ieee80211_check_scan(struct ieee80211vap *, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]); int ieee80211_check_scan_current(struct ieee80211vap *); int ieee80211_bg_scan(struct ieee80211vap *, int); void ieee80211_cancel_scan(struct ieee80211vap *); void ieee80211_cancel_anyscan(struct ieee80211vap *); void ieee80211_scan_next(struct ieee80211vap *); void ieee80211_scan_done(struct ieee80211vap *); void ieee80211_probe_curchan(struct ieee80211vap *, int); struct ieee80211_channel *ieee80211_scan_pickchannel(struct ieee80211com *, int); struct ieee80211_scanparams; void ieee80211_add_scan(struct ieee80211vap *, const struct ieee80211_scanparams *, const struct ieee80211_frame *, int subtype, int rssi, int noise); void ieee80211_scan_timeout(struct ieee80211com *); void ieee80211_scan_assoc_success(struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN]); enum { IEEE80211_SCAN_FAIL_TIMEOUT = 1, /* no response to mgmt frame */ IEEE80211_SCAN_FAIL_STATUS = 2 /* negative response to " " */ }; void ieee80211_scan_assoc_fail(struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN], int reason); void ieee80211_scan_flush(struct ieee80211vap *); struct ieee80211_scan_entry; typedef void ieee80211_scan_iter_func(void *, const struct ieee80211_scan_entry *); void ieee80211_scan_iterate(struct ieee80211vap *, ieee80211_scan_iter_func, void *); enum { IEEE80211_BPARSE_BADIELEN = 0x01, /* ie len past end of frame */ IEEE80211_BPARSE_RATES_INVALID = 0x02, /* invalid RATES ie */ IEEE80211_BPARSE_XRATES_INVALID = 0x04, /* invalid XRATES ie */ IEEE80211_BPARSE_SSID_INVALID = 0x08, /* invalid SSID ie */ IEEE80211_BPARSE_CHAN_INVALID = 0x10, /* invalid FH/DSPARMS chan */ IEEE80211_BPARSE_OFFCHAN = 0x20, /* DSPARMS chan != curchan */ IEEE80211_BPARSE_BINTVAL_INVALID= 0x40, /* invalid beacon interval */ IEEE80211_BPARSE_CSA_INVALID = 0x80, /* invalid CSA ie */ }; /* * Parameters supplied when adding/updating an entry in a * scan cache. Pointer variables should be set to NULL * if no data is available. Pointer references can be to * local data; any information that is saved will be copied. * All multi-byte values must be in host byte order. */ struct ieee80211_scanparams { uint8_t status; /* bitmask of IEEE80211_BPARSE_* */ uint8_t chan; /* channel # from FH/DSPARMS */ uint8_t bchan; /* curchan's channel # */ uint8_t fhindex; uint16_t fhdwell; /* FHSS dwell interval */ uint16_t capinfo; /* 802.11 capabilities */ uint16_t erp; /* NB: 0x100 indicates ie present */ uint16_t bintval; uint8_t timoff; uint8_t *ies; /* all captured ies */ size_t ies_len; /* length of all captured ies */ uint8_t *tim; uint8_t *tstamp; uint8_t *country; uint8_t *ssid; uint8_t *rates; uint8_t *xrates; uint8_t *doth; uint8_t *wpa; uint8_t *rsn; uint8_t *wme; uint8_t *htcap; uint8_t *htinfo; uint8_t *ath; uint8_t *tdma; uint8_t *csa; uint8_t *quiet; uint8_t *meshid; uint8_t *meshconf; uint8_t *spare[3]; }; /* * Scan cache entry format used when exporting data from a policy * module; this data may be represented some other way internally. */ struct ieee80211_scan_entry { uint8_t se_macaddr[IEEE80211_ADDR_LEN]; uint8_t se_bssid[IEEE80211_ADDR_LEN]; /* XXX can point inside se_ies */ uint8_t se_ssid[2+IEEE80211_NWID_LEN]; uint8_t se_rates[2+IEEE80211_RATE_MAXSIZE]; uint8_t se_xrates[2+IEEE80211_RATE_MAXSIZE]; union { uint8_t data[8]; u_int64_t tsf; } se_tstamp; /* from last rcv'd beacon */ uint16_t se_intval; /* beacon interval (host byte order) */ uint16_t se_capinfo; /* capabilities (host byte order) */ struct ieee80211_channel *se_chan;/* channel where sta found */ uint16_t se_timoff; /* byte offset to TIM ie */ uint16_t se_fhdwell; /* FH only (host byte order) */ uint8_t se_fhindex; /* FH only */ uint8_t se_dtimperiod; /* DTIM period */ uint16_t se_erp; /* ERP from beacon/probe resp */ int8_t se_rssi; /* avg'd recv ssi */ int8_t se_noise; /* noise floor */ uint8_t se_cc[2]; /* captured country code */ uint8_t se_meshid[2+IEEE80211_MESHID_LEN]; struct ieee80211_ies se_ies; /* captured ie's */ u_int se_age; /* age of entry (0 on create) */ }; MALLOC_DECLARE(M_80211_SCAN); /* * Template for an in-kernel scan policy module. * Modules register with the scanning code and are * typically loaded as needed. */ struct ieee80211_scanner { const char *scan_name; /* printable name */ int (*scan_attach)(struct ieee80211_scan_state *); int (*scan_detach)(struct ieee80211_scan_state *); int (*scan_start)(struct ieee80211_scan_state *, struct ieee80211vap *); int (*scan_restart)(struct ieee80211_scan_state *, struct ieee80211vap *); int (*scan_cancel)(struct ieee80211_scan_state *, struct ieee80211vap *); int (*scan_end)(struct ieee80211_scan_state *, struct ieee80211vap *); int (*scan_flush)(struct ieee80211_scan_state *); struct ieee80211_channel *(*scan_pickchan)( struct ieee80211_scan_state *, int); /* add an entry to the cache */ int (*scan_add)(struct ieee80211_scan_state *, const struct ieee80211_scanparams *, const struct ieee80211_frame *, int subtype, int rssi, int noise); /* age and/or purge entries in the cache */ void (*scan_age)(struct ieee80211_scan_state *); /* note that association failed for an entry */ void (*scan_assoc_fail)(struct ieee80211_scan_state *, const uint8_t macaddr[IEEE80211_ADDR_LEN], int reason); /* note that association succeed for an entry */ void (*scan_assoc_success)(struct ieee80211_scan_state *, const uint8_t macaddr[IEEE80211_ADDR_LEN]); /* iterate over entries in the scan cache */ void (*scan_iterate)(struct ieee80211_scan_state *, ieee80211_scan_iter_func *, void *); void (*scan_spare0)(void); void (*scan_spare1)(void); void (*scan_spare2)(void); void (*scan_spare4)(void); }; void ieee80211_scanner_register(enum ieee80211_opmode, const struct ieee80211_scanner *); void ieee80211_scanner_unregister(enum ieee80211_opmode, const struct ieee80211_scanner *); void ieee80211_scanner_unregister_all(const struct ieee80211_scanner *); const struct ieee80211_scanner *ieee80211_scanner_get(enum ieee80211_opmode); void ieee80211_scan_update_locked(struct ieee80211vap *vap, const struct ieee80211_scanner *scan); void ieee80211_scan_copy_ssid(struct ieee80211vap *vap, struct ieee80211_scan_state *ss, int nssid, const struct ieee80211_scan_ssid ssids[]); void ieee80211_scan_dump_probe_beacon(uint8_t subtype, int isnew, const uint8_t mac[IEEE80211_ADDR_LEN], const struct ieee80211_scanparams *sp, int rssi); -int ieee80211_start_scan_locked(const struct ieee80211_scanner *scan, - struct ieee80211vap *vap, int flags, u_int duration, - u_int mindwell, u_int maxdwell, - u_int nssid, const struct ieee80211_scan_ssid ssids[]); void ieee80211_scan_dump(struct ieee80211_scan_state *ss); #endif /* _NET80211_IEEE80211_SCAN_H_ */ Index: head/sys/net80211/ieee80211_scan_sw.c =================================================================== --- head/sys/net80211/ieee80211_scan_sw.c (revision 282704) +++ head/sys/net80211/ieee80211_scan_sw.c (revision 282705) @@ -1,872 +1,947 @@ /*- * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * IEEE 802.11 scanning support. */ #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include struct scan_state { struct ieee80211_scan_state base; /* public state */ u_int ss_iflags; /* flags used internally */ #define ISCAN_MINDWELL 0x0001 /* min dwell time reached */ #define ISCAN_DISCARD 0x0002 /* discard rx'd frames */ #define ISCAN_CANCEL 0x0004 /* cancel current scan */ #define ISCAN_ABORT 0x0008 /* end the scan immediately */ unsigned long ss_chanmindwell; /* min dwell on curchan */ unsigned long ss_scanend; /* time scan must stop */ u_int ss_duration; /* duration for next scan */ struct task ss_scan_task; /* scan execution */ struct cv ss_scan_cv; /* scan signal */ struct callout ss_scan_timer; /* scan timer */ }; #define SCAN_PRIVATE(ss) ((struct scan_state *) ss) /* * Amount of time to go off-channel during a background * scan. This value should be large enough to catch most * ap's but short enough that we can return on-channel * before our listen interval expires. * * XXX tunable * XXX check against configured listen interval */ #define IEEE80211_SCAN_OFFCHANNEL msecs_to_ticks(150) /* * Roaming-related defaults. RSSI thresholds are as returned by the * driver (.5dBm). Transmit rate thresholds are IEEE rate codes (i.e * .5M units) or MCS. */ /* rssi thresholds */ #define ROAM_RSSI_11A_DEFAULT 14 /* 11a bss */ #define ROAM_RSSI_11B_DEFAULT 14 /* 11b bss */ #define ROAM_RSSI_11BONLY_DEFAULT 14 /* 11b-only bss */ /* transmit rate thresholds */ #define ROAM_RATE_11A_DEFAULT 2*12 /* 11a bss */ #define ROAM_RATE_11B_DEFAULT 2*5 /* 11b bss */ #define ROAM_RATE_11BONLY_DEFAULT 2*1 /* 11b-only bss */ #define ROAM_RATE_HALF_DEFAULT 2*6 /* half-width 11a/g bss */ #define ROAM_RATE_QUARTER_DEFAULT 2*3 /* quarter-width 11a/g bss */ #define ROAM_MCS_11N_DEFAULT (1 | IEEE80211_RATE_MCS) /* 11n bss */ static void scan_curchan(struct ieee80211_scan_state *, unsigned long); static void scan_mindwell(struct ieee80211_scan_state *); static void scan_signal(void *); static void scan_task(void *, int); MALLOC_DEFINE(M_80211_SCAN, "80211scan", "802.11 scan state"); void ieee80211_swscan_attach(struct ieee80211com *ic) { struct scan_state *ss; ss = (struct scan_state *) malloc(sizeof(struct scan_state), M_80211_SCAN, M_NOWAIT | M_ZERO); if (ss == NULL) { ic->ic_scan = NULL; return; } callout_init_mtx(&ss->ss_scan_timer, IEEE80211_LOCK_OBJ(ic), 0); cv_init(&ss->ss_scan_cv, "scan"); TASK_INIT(&ss->ss_scan_task, 0, scan_task, ss); ic->ic_scan = &ss->base; ss->base.ss_ic = ic; ic->ic_scan_curchan = scan_curchan; ic->ic_scan_mindwell = scan_mindwell; /* * TODO: all of the non-vap scan calls should be methods! */ } void ieee80211_swscan_detach(struct ieee80211com *ic) { struct ieee80211_scan_state *ss = ic->ic_scan; if (ss != NULL) { IEEE80211_LOCK(ic); SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_ABORT; scan_signal(ss); IEEE80211_UNLOCK(ic); ieee80211_draintask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); callout_drain(&SCAN_PRIVATE(ss)->ss_scan_timer); KASSERT((ic->ic_flags & IEEE80211_F_SCAN) == 0, ("scan still running")); /* * For now, do the ss_ops detach here rather * than ieee80211_scan_detach(). * * I'll figure out how to cleanly split things up * at a later date. */ if (ss->ss_ops != NULL) { ss->ss_ops->scan_detach(ss); ss->ss_ops = NULL; } ic->ic_scan = NULL; free(SCAN_PRIVATE(ss), M_80211_SCAN); } } void ieee80211_swscan_vattach(struct ieee80211vap *vap) { /* nothing to do for now */ /* * TODO: all of the vap scan calls should be methods! */ } void ieee80211_swscan_vdetach(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_LOCK_ASSERT(ic); ss = ic->ic_scan; if (ss != NULL && ss->ss_vap == vap) { if (ic->ic_flags & IEEE80211_F_SCAN) { SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_ABORT; scan_signal(ss); } } } void ieee80211_swscan_set_scan_duration(struct ieee80211vap *vap, u_int duration) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); /* NB: flush frames rx'd before 1st channel change */ SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_DISCARD; SCAN_PRIVATE(ss)->ss_duration = duration; } void ieee80211_swscan_run_scan_task(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK_ASSERT(ic); ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); } /* * Start a scan unless one is already going. + */ +static int +ieee80211_swscan_start_scan_locked(const struct ieee80211_scanner *scan, + struct ieee80211vap *vap, int flags, u_int duration, + u_int mindwell, u_int maxdwell, + u_int nssid, const struct ieee80211_scan_ssid ssids[]) +{ + struct ieee80211com *ic = vap->iv_ic; + struct ieee80211_scan_state *ss = ic->ic_scan; + + IEEE80211_LOCK_ASSERT(ic); + + if (ic->ic_flags & IEEE80211_F_CSAPENDING) { + IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, + "%s: scan inhibited by pending channel change\n", __func__); + } else if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { + IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, + "%s: %s scan, duration %u mindwell %u maxdwell %u, desired mode %s, %s%s%s%s%s%s\n" + , __func__ + , flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive" + , duration, mindwell, maxdwell + , ieee80211_phymode_name[vap->iv_des_mode] + , flags & IEEE80211_SCAN_FLUSH ? "flush" : "append" + , flags & IEEE80211_SCAN_NOPICK ? ", nopick" : "" + , flags & IEEE80211_SCAN_NOJOIN ? ", nojoin" : "" + , flags & IEEE80211_SCAN_NOBCAST ? ", nobcast" : "" + , flags & IEEE80211_SCAN_PICK1ST ? ", pick1st" : "" + , flags & IEEE80211_SCAN_ONCE ? ", once" : "" + ); + + ieee80211_scan_update_locked(vap, scan); + if (ss->ss_ops != NULL) { + if ((flags & IEEE80211_SCAN_NOSSID) == 0) + ieee80211_scan_copy_ssid(vap, ss, nssid, ssids); + + /* NB: top 4 bits for internal use */ + ss->ss_flags = flags & 0xfff; + if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) + vap->iv_stats.is_scan_active++; + else + vap->iv_stats.is_scan_passive++; + if (flags & IEEE80211_SCAN_FLUSH) + ss->ss_ops->scan_flush(ss); + if (flags & IEEE80211_SCAN_BGSCAN) + ic->ic_flags_ext |= IEEE80211_FEXT_BGSCAN; + + /* Set duration for this particular scan */ + ieee80211_swscan_set_scan_duration(vap, duration); + + ss->ss_next = 0; + ss->ss_mindwell = mindwell; + ss->ss_maxdwell = maxdwell; + /* NB: scan_start must be before the scan runtask */ + ss->ss_ops->scan_start(ss, vap); +#ifdef IEEE80211_DEBUG + if (ieee80211_msg_scan(vap)) + ieee80211_scan_dump(ss); +#endif /* IEEE80211_DEBUG */ + ic->ic_flags |= IEEE80211_F_SCAN; + + /* Start scan task */ + ieee80211_swscan_run_scan_task(vap); + } + return 1; + } else { + IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, + "%s: %s scan already in progress\n", __func__, + ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); + } + return 0; +} + + +/* + * Start a scan unless one is already going. * * Called without the comlock held; grab the comlock as appropriate. */ int ieee80211_swscan_start_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; int result; IEEE80211_UNLOCK_ASSERT(ic); IEEE80211_LOCK(ic); - result = ieee80211_start_scan_locked(scan, vap, flags, duration, + result = ieee80211_swscan_start_scan_locked(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); IEEE80211_UNLOCK(ic); return result; } /* * Check the scan cache for an ap/channel to use; if that * fails then kick off a new scan. * * Called with the comlock held. * * XXX TODO: split out! */ int ieee80211_swscan_check_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags, u_int duration, u_int mindwell, u_int maxdwell, u_int nssid, const struct ieee80211_scan_ssid ssids[]) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; int result; IEEE80211_LOCK_ASSERT(ic); if (ss->ss_ops != NULL) { /* XXX verify ss_ops matches vap->iv_opmode */ if ((flags & IEEE80211_SCAN_NOSSID) == 0) { /* * Update the ssid list and mark flags so if * we call start_scan it doesn't duplicate work. */ ieee80211_scan_copy_ssid(vap, ss, nssid, ssids); flags |= IEEE80211_SCAN_NOSSID; } if ((ic->ic_flags & IEEE80211_F_SCAN) == 0 && (flags & IEEE80211_SCAN_FLUSH) == 0 && time_before(ticks, ic->ic_lastscan + vap->iv_scanvalid)) { /* * We're not currently scanning and the cache is * deemed hot enough to consult. Lock out others * by marking IEEE80211_F_SCAN while we decide if * something is already in the scan cache we can * use. Also discard any frames that might come * in while temporarily marked as scanning. */ SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_DISCARD; ic->ic_flags |= IEEE80211_F_SCAN; /* NB: need to use supplied flags in check */ ss->ss_flags = flags & 0xff; result = ss->ss_ops->scan_end(ss, vap); ic->ic_flags &= ~IEEE80211_F_SCAN; SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_DISCARD; if (result) { ieee80211_notify_scan_done(vap); return 1; } } } - result = ieee80211_start_scan_locked(scan, vap, flags, duration, + result = ieee80211_swscan_start_scan_locked(scan, vap, flags, duration, mindwell, maxdwell, nssid, ssids); return result; } /* * Restart a previous scan. If the previous scan completed * then we start again using the existing channel list. */ int ieee80211_swscan_bg_scan(const struct ieee80211_scanner *scan, struct ieee80211vap *vap, int flags) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; /* XXX assert unlocked? */ // IEEE80211_UNLOCK_ASSERT(ic); IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { u_int duration; /* * Go off-channel for a fixed interval that is large * enough to catch most ap's but short enough that * we can return on-channel before our listen interval * expires. */ duration = IEEE80211_SCAN_OFFCHANNEL; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan, ticks %u duration %lu\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive", ticks, duration); ieee80211_scan_update_locked(vap, scan); if (ss->ss_ops != NULL) { ss->ss_vap = vap; /* * A background scan does not select a new sta; it * just refreshes the scan cache. Also, indicate * the scan logic should follow the beacon schedule: * we go off-channel and scan for a while, then * return to the bss channel to receive a beacon, * then go off-channel again. All during this time * we notify the ap we're in power save mode. When * the scan is complete we leave power save mode. * If any beacon indicates there are frames pending * for us then we drop out of power save mode * (and background scan) automatically by way of the * usual sta power save logic. */ ss->ss_flags |= IEEE80211_SCAN_NOPICK | IEEE80211_SCAN_BGSCAN | flags ; /* if previous scan completed, restart */ if (ss->ss_next >= ss->ss_last) { if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) vap->iv_stats.is_scan_active++; else vap->iv_stats.is_scan_passive++; /* * NB: beware of the scan cache being flushed; * if the channel list is empty use the * scan_start method to populate it. */ ss->ss_next = 0; if (ss->ss_last != 0) ss->ss_ops->scan_restart(ss, vap); else { ss->ss_ops->scan_start(ss, vap); #ifdef IEEE80211_DEBUG if (ieee80211_msg_scan(vap)) ieee80211_scan_dump(ss); #endif /* IEEE80211_DEBUG */ } } ieee80211_swscan_set_scan_duration(vap, duration); ss->ss_maxdwell = duration; ic->ic_flags |= IEEE80211_F_SCAN; ic->ic_flags_ext |= IEEE80211_FEXT_BGSCAN; ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); } else { /* XXX msg+stat */ } } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s scan already in progress\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); } IEEE80211_UNLOCK(ic); /* NB: racey, does it matter? */ return (ic->ic_flags & IEEE80211_F_SCAN); } /* * Cancel any scan currently going on for the specified vap. */ void ieee80211_swscan_cancel_scan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) && ss->ss_vap == vap && (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: cancel %s scan\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); /* clear bg scan NOPICK and mark cancel request */ ss->ss_flags &= ~IEEE80211_SCAN_NOPICK; SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_CANCEL; /* wake up the scan task */ scan_signal(ss); } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called; F_SCAN=%d, vap=%s, CANCEL=%d\n", __func__, !! (ic->ic_flags & IEEE80211_F_SCAN), (ss->ss_vap == vap ? "match" : "nomatch"), !! (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL)); } IEEE80211_UNLOCK(ic); } /* * Cancel any scan currently going on. */ void ieee80211_swscan_cancel_anyscan(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_LOCK(ic); if ((ic->ic_flags & IEEE80211_F_SCAN) && (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: cancel %s scan\n", __func__, ss->ss_flags & IEEE80211_SCAN_ACTIVE ? "active" : "passive"); /* clear bg scan NOPICK and mark cancel request */ ss->ss_flags &= ~IEEE80211_SCAN_NOPICK; SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_CANCEL; /* wake up the scan task */ scan_signal(ss); } else { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called; F_SCAN=%d, vap=%s, CANCEL=%d\n", __func__, !! (ic->ic_flags & IEEE80211_F_SCAN), (ss->ss_vap == vap ? "match" : "nomatch"), !! (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL)); } IEEE80211_UNLOCK(ic); } /* * Public access to scan_next for drivers that manage * scanning themselves (e.g. for firmware-based devices). */ void ieee80211_swscan_scan_next(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__); /* wake up the scan task */ IEEE80211_LOCK(ic); scan_signal(ss); IEEE80211_UNLOCK(ic); } /* * Public access to scan_next for drivers that are not able to scan single * channels (e.g. for firmware-based devices). */ void ieee80211_swscan_scan_done(struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss; IEEE80211_LOCK_ASSERT(ic); ss = ic->ic_scan; scan_signal(ss); } /* * Probe the curent channel, if allowed, while scanning. * If the channel is not marked passive-only then send * a probe request immediately. Otherwise mark state and * listen for beacons on the channel; if we receive something * then we'll transmit a probe request. */ void ieee80211_swscan_probe_curchan(struct ieee80211vap *vap, int force) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; struct ifnet *ifp = vap->iv_ifp; int i; /* * Send directed probe requests followed by any * broadcast probe request. * XXX remove dependence on ic/vap->iv_bss */ for (i = 0; i < ss->ss_nssid; i++) ieee80211_send_probereq(vap->iv_bss, vap->iv_myaddr, ifp->if_broadcastaddr, ifp->if_broadcastaddr, ss->ss_ssid[i].ssid, ss->ss_ssid[i].len); if ((ss->ss_flags & IEEE80211_SCAN_NOBCAST) == 0) ieee80211_send_probereq(vap->iv_bss, vap->iv_myaddr, ifp->if_broadcastaddr, ifp->if_broadcastaddr, "", 0); } /* * Scan curchan. If this is an active scan and the channel * is not marked passive then send probe request frame(s). * Arrange for the channel change after maxdwell ticks. */ static void scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell) { struct ieee80211vap *vap = ss->ss_vap; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: calling; maxdwell=%lu\n", __func__, maxdwell); IEEE80211_LOCK(vap->iv_ic); if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) ieee80211_probe_curchan(vap, 0); callout_reset(&SCAN_PRIVATE(ss)->ss_scan_timer, maxdwell, scan_signal, ss); IEEE80211_UNLOCK(vap->iv_ic); } static void scan_signal(void *arg) { struct ieee80211_scan_state *ss = (struct ieee80211_scan_state *) arg; IEEE80211_LOCK_ASSERT(ss->ss_ic); cv_signal(&SCAN_PRIVATE(ss)->ss_scan_cv); } /* * Handle mindwell requirements completed; initiate a channel * change to the next channel asap. */ static void scan_mindwell(struct ieee80211_scan_state *ss) { struct ieee80211com *ic = ss->ss_ic; IEEE80211_DPRINTF(ss->ss_vap, IEEE80211_MSG_SCAN, "%s: called\n", __func__); IEEE80211_LOCK(ic); scan_signal(ss); IEEE80211_UNLOCK(ic); } static void scan_task(void *arg, int pending) { #define ISCAN_REP (ISCAN_MINDWELL | ISCAN_DISCARD) struct ieee80211_scan_state *ss = (struct ieee80211_scan_state *) arg; struct ieee80211vap *vap = ss->ss_vap; struct ieee80211com *ic = ss->ss_ic; struct ieee80211_channel *chan; unsigned long maxdwell, scanend; int scandone = 0; IEEE80211_LOCK(ic); if (vap == NULL || (ic->ic_flags & IEEE80211_F_SCAN) == 0 || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT)) { /* Cancelled before we started */ goto done; } if (ss->ss_next == ss->ss_last) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: no channels to scan\n", __func__); scandone = 1; goto done; } if (vap->iv_opmode == IEEE80211_M_STA && vap->iv_state == IEEE80211_S_RUN) { if ((vap->iv_bss->ni_flags & IEEE80211_NODE_PWR_MGT) == 0) { /* Enable station power save mode */ vap->iv_sta_ps(vap, 1); /* * Use an 1ms delay so the null data frame has a chance * to go out. * XXX Should use M_TXCB mechanism to eliminate this. */ cv_timedwait(&SCAN_PRIVATE(ss)->ss_scan_cv, IEEE80211_LOCK_OBJ(ic), hz / 1000); if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) goto done; } } scanend = ticks + SCAN_PRIVATE(ss)->ss_duration; /* XXX scan state can change! Re-validate scan state! */ IEEE80211_UNLOCK(ic); ic->ic_scan_start(ic); /* notify driver */ IEEE80211_LOCK(ic); for (;;) { scandone = (ss->ss_next >= ss->ss_last) || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: loop start; scandone=%d\n", __func__, scandone); if (scandone || (ss->ss_flags & IEEE80211_SCAN_GOTPICK) || (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) || time_after(ticks + ss->ss_mindwell, scanend)) break; chan = ss->ss_chans[ss->ss_next++]; /* * Watch for truncation due to the scan end time. */ if (time_after(ticks + ss->ss_maxdwell, scanend)) maxdwell = scanend - ticks; else maxdwell = ss->ss_maxdwell; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: chan %3d%c -> %3d%c [%s, dwell min %lums max %lums]\n", __func__, ieee80211_chan2ieee(ic, ic->ic_curchan), ieee80211_channel_type_char(ic->ic_curchan), ieee80211_chan2ieee(ic, chan), ieee80211_channel_type_char(chan), (ss->ss_flags & IEEE80211_SCAN_ACTIVE) && (chan->ic_flags & IEEE80211_CHAN_PASSIVE) == 0 ? "active" : "passive", ticks_to_msecs(ss->ss_mindwell), ticks_to_msecs(maxdwell)); /* * Potentially change channel and phy mode. */ ic->ic_curchan = chan; ic->ic_rt = ieee80211_get_ratetable(chan); IEEE80211_UNLOCK(ic); /* * Perform the channel change and scan unlocked so the driver * may sleep. Once set_channel returns the hardware has * completed the channel change. */ ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); /* * Scan curchan. Drivers for "intelligent hardware" * override ic_scan_curchan to tell the device to do * the work. Otherwise we manage the work outselves; * sending a probe request (as needed), and arming the * timeout to switch channels after maxdwell ticks. * * scan_curchan should only pause for the time required to * prepare/initiate the hardware for the scan (if at all), the * below condvar is used to sleep for the channels dwell time * and allows it to be signalled for abort. */ ic->ic_scan_curchan(ss, maxdwell); IEEE80211_LOCK(ic); /* XXX scan state can change! Re-validate scan state! */ SCAN_PRIVATE(ss)->ss_chanmindwell = ticks + ss->ss_mindwell; /* clear mindwell lock and initial channel change flush */ SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_REP; if ((SCAN_PRIVATE(ss)->ss_iflags & (ISCAN_CANCEL|ISCAN_ABORT))) continue; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: waiting\n", __func__); /* Wait to be signalled to scan the next channel */ cv_wait(&SCAN_PRIVATE(ss)->ss_scan_cv, IEEE80211_LOCK_OBJ(ic)); } IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: out\n", __func__); if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_ABORT) goto done; IEEE80211_UNLOCK(ic); ic->ic_scan_end(ic); /* notify driver */ IEEE80211_LOCK(ic); /* XXX scan state can change! Re-validate scan state! */ /* * Since a cancellation may have occured during one of the * driver calls (whilst unlocked), update scandone. */ if (scandone == 0 && ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0)) { /* XXX printf? */ if_printf(vap->iv_ifp, "%s: OOPS! scan cancelled during driver call (1)!\n", __func__); scandone = 1; } /* * Record scan complete time. Note that we also do * this when canceled so any background scan will * not be restarted for a while. */ if (scandone) ic->ic_lastscan = ticks; /* return to the bss channel */ if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && ic->ic_curchan != ic->ic_bsschan) { ieee80211_setupcurchan(ic, ic->ic_bsschan); IEEE80211_UNLOCK(ic); ic->ic_set_channel(ic); ieee80211_radiotap_chan_change(ic); IEEE80211_LOCK(ic); } /* clear internal flags and any indication of a pick */ SCAN_PRIVATE(ss)->ss_iflags &= ~ISCAN_REP; ss->ss_flags &= ~IEEE80211_SCAN_GOTPICK; /* * If not canceled and scan completed, do post-processing. * If the callback function returns 0, then it wants to * continue/restart scanning. Unfortunately we needed to * notify the driver to end the scan above to avoid having * rx frames alter the scan candidate list. */ if ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) == 0 && !ss->ss_ops->scan_end(ss, vap) && (ss->ss_flags & IEEE80211_SCAN_ONCE) == 0 && time_before(ticks + ss->ss_mindwell, scanend)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: done, restart " "[ticks %u, dwell min %lu scanend %lu]\n", __func__, ticks, ss->ss_mindwell, scanend); ss->ss_next = 0; /* reset to begining */ if (ss->ss_flags & IEEE80211_SCAN_ACTIVE) vap->iv_stats.is_scan_active++; else vap->iv_stats.is_scan_passive++; ss->ss_ops->scan_restart(ss, vap); /* XXX? */ ieee80211_runtask(ic, &SCAN_PRIVATE(ss)->ss_scan_task); IEEE80211_UNLOCK(ic); return; } /* past here, scandone is ``true'' if not in bg mode */ if ((ss->ss_flags & IEEE80211_SCAN_BGSCAN) == 0) scandone = 1; IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: %s, [ticks %u, dwell min %lu scanend %lu]\n", __func__, scandone ? "done" : "stopped", ticks, ss->ss_mindwell, scanend); /* * Since a cancellation may have occured during one of the * driver calls (whilst unlocked), update scandone. */ if (scandone == 0 && ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_CANCEL) != 0)) { /* XXX printf? */ if_printf(vap->iv_ifp, "%s: OOPS! scan cancelled during driver call (2)!\n", __func__); scandone = 1; } /* * Clear the SCAN bit first in case frames are * pending on the station power save queue. If * we defer this then the dispatch of the frames * may generate a request to cancel scanning. */ done: ic->ic_flags &= ~IEEE80211_F_SCAN; /* * Drop out of power save mode when a scan has * completed. If this scan was prematurely terminated * because it is a background scan then don't notify * the ap; we'll either return to scanning after we * receive the beacon frame or we'll drop out of power * save mode because the beacon indicates we have frames * waiting for us. */ if (scandone) { vap->iv_sta_ps(vap, 0); if (ss->ss_next >= ss->ss_last) { ieee80211_notify_scan_done(vap); ic->ic_flags_ext &= ~IEEE80211_FEXT_BGSCAN; } } SCAN_PRIVATE(ss)->ss_iflags &= ~(ISCAN_CANCEL|ISCAN_ABORT); ss->ss_flags &= ~(IEEE80211_SCAN_ONCE | IEEE80211_SCAN_PICK1ST); IEEE80211_UNLOCK(ic); #undef ISCAN_REP } /* * Process a beacon or probe response frame. */ void ieee80211_swscan_add_scan(struct ieee80211vap *vap, const struct ieee80211_scanparams *sp, const struct ieee80211_frame *wh, int subtype, int rssi, int noise) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_scan_state *ss = ic->ic_scan; /* XXX locking */ /* * Frames received during startup are discarded to avoid * using scan state setup on the initial entry to the timer * callback. This can occur because the device may enable * rx prior to our doing the initial channel change in the * timer routine. */ if (SCAN_PRIVATE(ss)->ss_iflags & ISCAN_DISCARD) return; #ifdef IEEE80211_DEBUG if (ieee80211_msg_scan(vap) && (ic->ic_flags & IEEE80211_F_SCAN)) ieee80211_scan_dump_probe_beacon(subtype, 1, wh->i_addr2, sp, rssi); #endif if (ss->ss_ops != NULL && ss->ss_ops->scan_add(ss, sp, wh, subtype, rssi, noise)) { /* * If we've reached the min dwell time terminate * the timer so we'll switch to the next channel. */ if ((SCAN_PRIVATE(ss)->ss_iflags & ISCAN_MINDWELL) == 0 && time_after_eq(ticks, SCAN_PRIVATE(ss)->ss_chanmindwell)) { IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, "%s: chan %3d%c min dwell met (%u > %lu)\n", __func__, ieee80211_chan2ieee(ic, ic->ic_curchan), ieee80211_channel_type_char(ic->ic_curchan), ticks, SCAN_PRIVATE(ss)->ss_chanmindwell); SCAN_PRIVATE(ss)->ss_iflags |= ISCAN_MINDWELL; /* * NB: trigger at next clock tick or wait for the * hardware. */ ic->ic_scan_mindwell(ss); } } }