Index: projects/release-arm-redux/release/arm/BEAGLEBONE.conf
===================================================================
--- projects/release-arm-redux/release/arm/BEAGLEBONE.conf	(revision 282565)
+++ projects/release-arm-redux/release/arm/BEAGLEBONE.conf	(revision 282566)
@@ -1,10 +1,31 @@
 #!/bin/sh
 #
 # $FreeBSD$
 #
 
 EMBEDDEDBUILD=1
 EMBEDDED_TARGET="arm"
 EMBEDDED_TARGET_ARCH="armv6"
 EMBEDDEDPORTS="sysutils/u-boot-beaglebone"
 KERNEL="BEAGLEBONE"
+IMAGE_SIZE="1G"
+PART_SCHEME="MBR"
+FAT_SIZE="2m"
+FAT_TYPE="12"
+MD_ARGS="-x 63 -y 255"
+
+arm_install_uboot() {
+	UBOOT_DIR="/usr/local/share/u-boot/u-boot-beaglebone"
+	FDT_DIR="${WORLDIR}/sys/boot/fdt/dts/arm"
+	mount_msdosfs /dev/${mddev}s1 ${DESTDIR}
+	cp -p ${UBOOT_DIR}/MLO ${DESTDIR}/MLO
+	cp -p ${UBOOT_DIR}/u-boot.img ${DESTDIR}/bb-uboot.img
+	cp -p ${FDT_DIR}/beaglebone.dts ${DESTDIR}/bbone.dts
+	cp -p ${FDT_DIR}/beaglebone.dts ${DESTDIR}/bbone.dtb
+	cp -p ${FDT_DIR}/beaglebone-black.dts ${DESTDIR}/bboneblk.dts
+	cp -p ${FDT_DIR}/beaglebone-black.dts ${DESTDIR}/bboneblk.dtb
+	touch ${DESTDIR}/bb-uEnv.txt
+	umount_loop ${DESTDIR}
+	
+	return 0
+}
Index: projects/release-arm-redux/release/release.sh
===================================================================
--- projects/release-arm-redux/release/release.sh	(revision 282565)
+++ projects/release-arm-redux/release/release.sh	(revision 282566)
@@ -1,367 +1,378 @@
 #!/bin/sh
 #-
 # Copyright (c) 2013-2015 The FreeBSD Foundation
 # Copyright (c) 2013 Glen Barber
 # Copyright (c) 2011 Nathan Whitehorn
 # All rights reserved.
 #
 # Portions of this software were developed by Glen Barber
 # under sponsorship from the FreeBSD Foundation.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
 # are met:
 # 1. Redistributions of source code must retain the above copyright
 #    notice, this list of conditions and the following disclaimer.
 # 2. Redistributions in binary form must reproduce the above copyright
 #    notice, this list of conditions and the following disclaimer in the
 #    documentation and/or other materials provided with the distribution.
 #
 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 # ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 # SUCH DAMAGE.
 #
 # release.sh: check out source trees, and build release components with
 #  totally clean, fresh trees.
 # Based on release/generate-release.sh written by Nathan Whitehorn
 #
 # $FreeBSD$
 #
 
 export PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin"
 
 VERSION=2
 
 # Prototypes that can be redefined per-chroot or per-target.
 load_chroot_env() { }
 load_target_env() { }
 buildenv_setup() { }
 
 usage() {
 	echo "Usage: $0 [-c release.conf]"
 	exit 1
 }
 
 # env_setup(): Set up the default build environment variables, such as the
 # CHROOTDIR, VCSCMD, SVNROOT, etc.  This is called before the release.conf
 # file is sourced, if '-c <release.conf>' is specified.
 env_setup() {
 	# The directory within which the release will be built.
 	CHROOTDIR="/scratch"
 	RELENGDIR="$(realpath $(dirname $(basename ${0})))"
 
 	# The default version control system command to obtain the sources.
 	for _dir in /usr/bin /usr/local/bin; do
 		for _svn in svn svnlite; do
 			[ -x "${_dir}/${_svn}" ] && VCSCMD="${_dir}/${_svn}"
 			[ ! -z "${VCSCMD}" ] && break 2
 		done
 	done
 	VCSCMD="${VCSCMD} checkout"
 
 	# The default svn checkout server, and svn branches for src/, doc/,
 	# and ports/.
 	SVNROOT="svn://svn.FreeBSD.org/"
 	SRCBRANCH="base/head@rHEAD"
 	DOCBRANCH="doc/head@rHEAD"
 	PORTBRANCH="ports/head@rHEAD"
 
 	# Set for embedded device builds.
 	EMBEDDEDBUILD=
 
 	# Sometimes one needs to checkout src with --force svn option.
 	# If custom kernel configs copied to src tree before checkout, e.g.
 	SRC_FORCE_CHECKOUT=
 
 	# The default make.conf and src.conf to use.  Set to /dev/null
 	# by default to avoid polluting the chroot(8) environment with
 	# non-default settings.
 	MAKE_CONF="/dev/null"
 	SRC_CONF="/dev/null"
 
 	# The number of make(1) jobs, defaults to the number of CPUs available
 	# for buildworld, and half of number of CPUs available for buildkernel.
 	WORLD_FLAGS="-j$(sysctl -n hw.ncpu)"
 	KERNEL_FLAGS="-j$(( $(( $(sysctl -n hw.ncpu) + 1 )) / 2))"
 
 	MAKE_FLAGS="-s"
 
 	# The name of the kernel to build, defaults to GENERIC.
 	KERNEL="GENERIC"
 
 	# Set to non-empty value to disable checkout of doc/ and/or ports/.
 	# Disabling ports/ checkout also forces NODOC to be set.
 	NODOC=
 	NOPORTS=
 
 	# Set to non-empty value to build dvd1.iso as part of the release.
 	WITH_DVD=
 	WITH_COMPRESSED_IMAGES=
 
 	# Set to non-empty value to build virtual machine images as part of
 	# the release.
 	WITH_VMIMAGES=
 	WITH_COMPRESSED_VMIMAGES=
 	XZ_THREADS=0
 
 	# Set to non-empty value to build virtual machine images for various
 	# cloud providers as part of the release.
 	WITH_CLOUDWARE=
 
 	return 0
 } # env_setup()
 
 # env_check(): Perform sanity tests on the build environment, such as ensuring
 # files/directories exist, as well as adding backwards-compatibility hacks if
 # necessary.  This is called unconditionally, and overrides the defaults set
 # in env_setup() if '-c <release.conf>' is specified.
 env_check() {
 	chroot_build_release_cmd="chroot_build_release"
 	# Fix for backwards-compatibility with release.conf that does not have
 	# the trailing '/'.
 	case ${SVNROOT} in
 		*svn*)
 			SVNROOT="${SVNROOT}/"
 			;;
 		*)
 			;;
 	esac
 
 	# Prefix the branches with the SVNROOT for the full checkout URL.
 	SRCBRANCH="${SVNROOT}${SRCBRANCH}"
 	DOCBRANCH="${SVNROOT}${DOCBRANCH}"
 	PORTBRANCH="${SVNROOT}${PORTBRANCH}"
 
 	if [ -n "${EMBEDDEDBUILD}" ]; then
 		WITH_DVD=
 		WITH_COMPRESSED_IMAGES=
 		NODOC=yes
 		case ${EMBEDDED_TARGET}:${EMBEDDED_TARGET_ARCH} in
 			arm:armv6)
 				chroot_build_release_cmd="chroot_arm_armv6_build_release"
 				;;
 			*)
 		esac
 	fi
 
 	# If PORTS is set and NODOC is unset, force NODOC=yes because the ports
 	# tree is required to build the documentation set.
 	if [ -n "${NOPORTS}" ] && [ -z "${NODOC}" ]; then
 		echo "*** NOTICE: Setting NODOC=1 since ports tree is required"
 		echo "            and NOPORTS is set."
 		NODOC=yes
 	fi
 
 	# If NOPORTS and/or NODOC are unset, they must not pass to make as
 	# variables.  The release makefile verifies definedness of the
 	# NOPORTS/NODOC variables instead of their values.
 	DOCPORTS=
 	if [ -n "${NOPORTS}" ]; then
 		DOCPORTS="NOPORTS=yes "
 	fi
 	if [ -n "${NODOC}" ]; then
 		DOCPORTS="${DOCPORTS}NODOC=yes"
 	fi
 
 	# The aggregated build-time flags based upon variables defined within
 	# this file, unless overridden by release.conf.  In most cases, these
 	# will not need to be changed.
 	CONF_FILES="__MAKE_CONF=${MAKE_CONF} SRCCONF=${SRC_CONF}"
 	if [ -n "${TARGET}" ] && [ -n "${TARGET_ARCH}" ]; then
 		ARCH_FLAGS="TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH}"
 	else
 		ARCH_FLAGS=
 	fi
 	# Force src checkout if configured
 	FORCE_SRC_KEY=
 	if [ -n "${SRC_FORCE_CHECKOUT}" ]; then
 		FORCE_SRC_KEY="--force"
 	fi
 
 	if [ -z "${CHROOTDIR}" ]; then
 		echo "Please set CHROOTDIR."
 		exit 1
 	fi
 
 	if [ $(id -u) -ne 0 ]; then
 		echo "Needs to be run as root."
 		exit 1
 	fi
 
 	CHROOT_MAKEENV="${CHROOT_MAKEENV} \
 		MAKEOBJDIRPREFIX=${CHROOTDIR}/tmp/obj"
 	CHROOT_WMAKEFLAGS="${MAKE_FLAGS} ${WORLD_FLAGS} ${CONF_FILES}"
 	CHROOT_IMAKEFLAGS="${CONF_FILES}"
 	CHROOT_DMAKEFLAGS="${CONF_FILES}"
 	RELEASE_WMAKEFLAGS="${MAKE_FLAGS} ${WORLD_FLAGS} ${ARCH_FLAGS} \
 		${CONF_FILES}"
 	RELEASE_KMAKEFLAGS="${MAKE_FLAGS} ${KERNEL_FLAGS} \
 		KERNCONF=\"${KERNEL}\" ${ARCH_FLAGS} ${CONF_FILES}"
 	RELEASE_RMAKEFLAGS="${ARCH_FLAGS} \
 		KERNCONF=\"${KERNEL}\" ${CONF_FILES} ${DOCPORTS} \
 		WITH_DVD=${WITH_DVD} WITH_VMIMAGES=${WITH_VMIMAGES} \
 		WITH_CLOUDWARE=${WITH_CLOUDWARE} XZ_THREADS=${XZ_THREADS}"
 
 	return 0
 } # env_check()
 
 # chroot_setup(): Prepare the build chroot environment for the release build.
 chroot_setup() {
 	load_chroot_env
 	mkdir -p ${CHROOTDIR}/usr
 
 	if [ -z "${SRC_UPDATE_SKIP}" ]; then
 		${VCSCMD} ${FORCE_SRC_KEY} ${SRCBRANCH} ${CHROOTDIR}/usr/src
 	fi
 	if [ -z "${NODOC}" ] && [ -z "${DOC_UPDATE_SKIP}" ]; then
 		${VCSCMD} ${DOCBRANCH} ${CHROOTDIR}/usr/doc
 	fi
 	if [ -z "${NOPORTS}" ] && [ -z "${PORTS_UPDATE_SKIP}" ]; then
 		${VCSCMD} ${PORTBRANCH} ${CHROOTDIR}/usr/ports
 	fi
 
 	if [ -z "${CHROOTBUILD_SKIP}" ]; then
 		cd ${CHROOTDIR}/usr/src
 		env ${CHROOT_MAKEENV} make ${CHROOT_WMAKEFLAGS} buildworld
 		env ${CHROOT_MAKEENV} make ${CHROOT_IMAKEFLAGS} installworld \
 			DESTDIR=${CHROOTDIR}
 		env ${CHROOT_MAKEENV} make ${CHROOT_DMAKEFLAGS} distribution \
 			DESTDIR=${CHROOTDIR}
 	fi
 
 	return 0
 } # chroot_setup()
 
 # extra_chroot_setup(): Prepare anything additional within the build
 # necessary for the release build.
 extra_chroot_setup() {
 	mount -t devfs devfs ${CHROOTDIR}/dev
 	[ -e /etc/resolv.conf ] && cp /etc/resolv.conf \
 		${CHROOTDIR}/etc/resolv.conf
 	# Run ldconfig(8) in the chroot directory so /var/run/ld-elf*.so.hints
 	# is created.  This is needed by ports-mgmt/pkg.
 	eval chroot ${CHROOTDIR} /etc/rc.d/ldconfig forcerestart
 
 	# If MAKE_CONF and/or SRC_CONF are set and not character devices
 	# (/dev/null), copy them to the chroot.
 	if [ -e ${MAKE_CONF} ] && [ ! -c ${MAKE_CONF} ]; then
 		mkdir -p ${CHROOTDIR}/$(dirname ${MAKE_CONF})
 		cp ${MAKE_CONF} ${CHROOTDIR}/${MAKE_CONF}
 	fi
 	if [ -e ${SRC_CONF} ] && [ ! -c ${SRC_CONF} ]; then
 		mkdir -p ${CHROOTDIR}/$(dirname ${SRC_CONF})
 		cp ${SRC_CONF} ${CHROOTDIR}/${SRC_CONF}
 	fi
 
 	if [ -d ${CHROOTDIR}/usr/ports ]; then
 		# Trick the ports 'run-autotools-fixup' target to do the right
 		# thing.
 		_OSVERSION=$(chroot ${CHROOTDIR} /usr/bin/uname -U)
 		REVISION=$(chroot ${CHROOTDIR} make -C /usr/src/release -V REVISION)
 		BRANCH=$(chroot ${CHROOTDIR} make -C /usr/src/release -V BRANCH)
 		UNAME_r=${REVISION}-${BRANCH}
 		if [ -d ${CHROOTDIR}/usr/doc ] && [ -z "${NODOC}" ]; then
 			PBUILD_FLAGS="OSVERSION=${_OSVERSION} BATCH=yes"
 			PBUILD_FLAGS="${PBUILD_FLAGS} UNAME_r=${UNAME_r}"
 			PBUILD_FLAGS="${PBUILD_FLAGS} OSREL=${REVISION}"
 			chroot ${CHROOTDIR} make -C /usr/ports/textproc/docproj \
 				${PBUILD_FLAGS} OPTIONS_UNSET="FOP IGOR" \
 				install clean distclean
 		fi
 	fi
 
 	if [ ! -z "${EMBEDDEDPORTS}" ]; then
 		for _PORT in ${EMBEDDEDPORTS}; do
 			eval chroot ${CHROOTDIR} make -C /usr/ports/${_PORT} \
 				BATCH=1 FORCE_PKG_REGISTER=1 install clean distclean
 		done
 	fi
 
 	buildenv_setup
 
 	return 0
 } # extra_chroot_setup()
 
 # chroot_build_target(): Build the userland and kernel for the build target.
 chroot_build_target() {
 	load_target_env
 	if [ ! -z "${EMBEDDEDBUILD}" ]; then
 		RELEASE_WMAKEFLAGS="${RELEASE_WMAKEFLAGS} \
 			TARGET=${EMBEDDED_TARGET} \
 			TARGET_ARCH=${EMBEDDED_TARGET_ARCH}"
 		RELEASE_KMAKEFLAGS="${RELEASE_KMAKEFLAGS} \
 			TARGET=${EMBEDDED_TARGET} \
 			TARGET_ARCH=${EMBEDDED_TARGET_ARCH}"
 	fi
 	eval chroot ${CHROOTDIR} make -C /usr/src ${RELEASE_WMAKEFLAGS} buildworld
 	eval chroot ${CHROOTDIR} make -C /usr/src ${RELEASE_KMAKEFLAGS} buildkernel
 
 	return 0
 } # chroot_build_target
 
 # chroot_build_release(): Invoke the 'make release' target.
 chroot_build_release() {
 	load_target_env
 	eval chroot ${CHROOTDIR} make -C /usr/src/release \
 		${RELEASE_RMAKEFLAGS} release
 	eval chroot ${CHROOTDIR} make -C /usr/src/release \
 		${RELEASE_RMAKEFLAGS} install DESTDIR=/R \
 		WITH_COMPRESSED_IMAGES=${WITH_COMPRESSED_IMAGES} \
 		WITH_COMPRESSED_VMIMAGES=${WITH_COMPRESSED_VMIMAGES}
 
 	return 0
 } # chroot_build_release()
 
 # chroot_arm_armv6_build_release(): Create arm/armv6 SD card image.
 chroot_arm_armv6_build_release() {
 	load_target_env
 	# XXX: In progress.
 	if [ -e "${RELENGDIR}/tools/${TARGET}.subr" ]; then
 		. "${RELENGDIR}/tools/${TARGET}.subr"
 	fi
+	. "${RELENGDIR}/arm/${KERNEL}.conf"
+	WORLDDIR="$(eval chroot ${CHROOTDIR} make -C /usr/src/release -V WORLDDIR)"
+	OBJDIR="$(eval chroot ${CHROOTDIR} make -C /usr/src/release -V .OBJDIR)"
+	DESTDIR="${OBJDIR}/${KERNEL}"
+	IMGBASE="${OBJDIR}/${KERNEL}.img"
+	mkdir -p ${DESTDIR}
+	truncate -s ${IMAGE_SIZE} ${IMGBASE}
+	mddev=$(mdconfig -f ${IMGBASE} ${MD_ARGS})
+	arm_create_disk
+	arm_install_base
+	arm_install_uboot
 
 	return 0
 } # chroot_arm_armv6_build_release()
 
 # main(): Start here.
 main() {
 	set -e # Everything must succeed
 	env_setup
 	while getopts c: opt; do
 		case ${opt} in
 			c)
 				RELEASECONF="${OPTARG}"
 				;;
 			\?)
 				usage
 				;;
 		esac
 	done
 	shift $(($OPTIND - 1))
 	if [ ! -z "${RELEASECONF}" ]; then
 		if [ -e "${RELEASECONF}" ]; then
 			. ${RELEASECONF}
 		else
 			echo "Nonexistent configuration file: ${RELEASECONF}"
 			echo "Using default build environment."
 		fi
 	fi
 	env_check
 	trap "umount ${CHROOTDIR}/dev" EXIT # Clean up devfs mount on exit
 	chroot_setup
 	extra_chroot_setup
 	chroot_build_target
 	${chroot_build_release_cmd}
 
 	return 0
 } # main()
 
 main "${@}"
Index: projects/release-arm-redux/release/tools/arm.subr
===================================================================
--- projects/release-arm-redux/release/tools/arm.subr	(nonexistent)
+++ projects/release-arm-redux/release/tools/arm.subr	(revision 282566)
@@ -0,0 +1,121 @@
+#!/bin/sh
+#-
+# Copyright (c) 2015 The FreeBSD Foundation
+# All rights reserved.
+#
+# Portions of this software were developed by Glen Barber
+# under sponsorship from the FreeBSD Foundation.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+#
+# Common subroutines used to build arm/armv6 images.
+#
+# $FreeBSD$
+#
+
+cleanup() {
+	if [ -c "${DESTDIR}/dev/null" ]; then
+		umount_loop ${DESTDIR}/dev 2>/dev/null
+	fi
+	umount_loop ${DESTDIR}
+	if [ ! -z "${mddev}" ]; then
+		mdconfig -d -u ${mddev}
+	fi
+
+	return 0
+}
+
+umount_loop() {
+	DIR=$1
+	i=0
+	sync
+	while ! umount ${DIR}; do
+		i=$(( $i + 1 ))
+		if [ $i -ge 10 ]; then
+			# This should never happen.  But, it has happened.
+			echo "Cannot umount(8) ${DIR}"
+			echo "Something has gone horribly wrong."
+			return 1
+		fi
+		sleep 1
+	done
+
+	return 0
+}
+
+arm_create_disk() {
+	# Create the target raw file and temporary work directory.
+	gpart create -s ${PART_SCHEME} ${IMGBASE}
+	gpart add -t '\!12' -a 63 -s ${FAT_SIZE} ${mddev}
+	gpart set -a active -i 1 ${mddev}
+	newfs_msdos -L msdosboot -F ${FAT_TYPE} /dev/${mddev}s1
+	gpart add -t freebsd ${mddev}
+	gpart create -s bsd ${mddev}s2
+	gpart add -t freebsd-ufs -a 64k /dev/${mddev}s2
+	newfs -U -L rootfs /dev/${mddev}s2a
+	tunefs -j enable -N enable /dev/${mddev}s2a
+
+	return 0
+}
+
+arm_install_base() {
+	mount /dev/${mddev}s2a ${DESTDIR}
+	cd ${WORLDDIR} && \
+		eval make TARGET=${EMBEDDED_TARGET} \
+			TARGET_ARCH=${EMBEDDED_TARGET_ARCH} \
+			DESTDIR=${DESTDIR} KERNCONF=${KERNEL} \
+			installworld installkernel distribution
+
+	echo '# Custom /etc/fstab for FreeBSD embedded images' \
+		> ${DESTDIR}/etc/fstab
+	echo "/dev/msdosfs/MSDOSBOOT /boot/msdos msdosfs rw,noatime 0 0" \
+		>> ${DESTDIR}/etc/fstab
+	echo "/dev/ufs/rootfs   /       ufs     rw      1       1" \
+		>> ${DESTDIR}/etc/fstab
+	echo "md /tmp mfs rw,noatime,-s30m 0 0" \
+		>> ${DESTDIR}/etc/fstab
+	echo "md /var/log mfs rw,noatime,-s15m 0 0" \
+		>> ${DESTDIR}/etc/fstab
+	echo "md /var/tmp mfs rw,noatime,-s12m 0 0" \
+		>> ${DESTDIR}/etc/fstab
+
+	local hostname
+	hostname="$(echo ${KERNEL} | tr '[:upper:]' '[:lower:]')"
+	echo "hostname=\"${hostname}\"" > ${DESTDIR}/etc/rc.conf
+	echo 'ifconfig_DEFAULT="DHCP"' >> ${DESTDIR}/etc/rc.conf
+	echo 'sshd_enable="YES"' >> ${DESTDIR}/etc/rc.conf
+	echo 'sendmail_enable="NONE"' >> ${DESTDIR}/etc/rc.conf
+	echo 'sendmail_submit_enable="NO"' >> ${DESTDIR}/etc/rc.conf
+	echo 'sendmail_outbound_enable="NO"' >> ${DESTDIR}/etc/rc.conf
+	echo 'sendmail_msp_queue_enable="NO"' >> ${DESTDIR}/etc/rc.conf
+
+	sync
+	umount_loop ${DESTDIR}
+
+	return 0
+}
+
+arm_install_uboot() {
+	# Override in the arm/KERNEL.conf file.
+
+	return 0
+}

Property changes on: projects/release-arm-redux/release/tools/arm.subr
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property