Index: head/sys/arm/conf/AML8726 =================================================================== --- head/sys/arm/conf/AML8726 (revision 282498) +++ head/sys/arm/conf/AML8726 (revision 282499) @@ -1,143 +1,145 @@ # # Kernel configuration for Amlogic aml8726 boards. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident AML8726 + +include "std.armv6" include "../amlogic/aml8726/std.aml8726" options HZ=100 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options LINUX_BOOT_ABI options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options BOOTVERBOSE=1 options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=axe0 # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:mmcsd0s2\" # GPIO device gpio device gpioled # I2C support device iicbus device iicbb device iic # vt is the default console driver, resembling an SCO console device vt #device kbdmux # Serial (COM) ports device uart # Generic UART driver # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device pty # BSD-style compatibility pseudo ttys # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device usb # General USB code (mandatory for USB) device dwcotg # DWC OTG controller options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device ukbd # USB keyboard #device ums # USB mouse device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device umass # Disks/Mass storage - Requires scbus and da # Ethernet support device miibus # MII bus support # SoC Ethernet, requires miibus device dwc # USB Ethernet support, requires miibus device axe # ASIX Electronics USB Ethernet # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: head/sys/arm/conf/ARMADAXP =================================================================== --- head/sys/arm/conf/ARMADAXP (revision 282498) +++ head/sys/arm/conf/ARMADAXP (revision 282499) @@ -1,136 +1,138 @@ # # Custom kernel for Marvell Armada XP # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident MV-88F78XX0 + +include "std.armv6" include "../mv/armadaxp/std.mv78x60" options SOC_MV_ARMADAXP makeoptions WERROR="-Werror" options HZ=1000 #options SCHED_ULE # ULE scheduler options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options VERBOSE_SYSINIT # Enable verbose sysinit messages options ALT_BREAK_TO_DEBUGGER options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options GDB #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB #options DIAGNOSTIC #options KTR #options KTR_VERBOSE=0 #options KTR_ENTRIES=16384 #options KTR_MASK=(KTR_SPARE2) #options KTR_COMPILE=KTR_ALL # NFS root from boopt/dhcp options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=mge0 options ROOTDEVNAME=\"ufs:/dev/da0p1\" options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Pseudo devices device random device pty device loop device md # USB options USB_DEBUG # enable debug msgs device usb device ehci device umass device scbus device pass device da # SATA device mvs # Serial ports device uart # I2C (TWSI) device iic device iicbus #Network device ether device mge # Marvell Gigabit Ethernet controller device mii device e1000phy device bpf options DEVICE_POLLING device vlan #PCI/PCIE device pci # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=db78460.dts Index: head/sys/arm/conf/ATMEL =================================================================== --- head/sys/arm/conf/ATMEL (revision 282498) +++ head/sys/arm/conf/ATMEL (revision 282499) @@ -1,182 +1,183 @@ # Kernel configuration to test compile all the atmel bits with one # configuration. This kernel will not (presently) boot. Do not copy # it to create your own custom config file. # # $FreeBSD$ ident ATMEL +include "std.arm" include "../at91/std.atmel" # Typical values for most SoCs and board configurations. Will not work for # at91sam9g45 or on some boards with non u-boot boot loaders. makeoptions KERNPHYSADDR=0x20000000 makeoptions KERNVIRTADDR=0xc0000000 options KERNPHYSADDR=0x20000000 options KERNVIRTADDR=0xc0000000 makeoptions MODULES_OVERRIDE="dtb/atmel" # list all boards here, but not just yet (no multiboard in mainline). options ARM_MANY_BOARD device at91_board_bwct device at91_board_ethernut5 device at91_board_hl200 device at91_board_hl201 device at91_board_kb920x device at91_board_qila9g20 device at91_board_sam9260ek device at91_board_sam9g20ek device at91_board_sam9x25ek device at91_board_sn9g45 device at91_board_tsc4370 #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options MD_ROOT # MD is a potential root device options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options COMPAT_FREEBSD9 # Compatible with FreeBSD9 options COMPAT_FREEBSD10 # Compatible with FreeBSD10 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. #options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) #options AUDIT # Security event auditing #options CAPABILITY_MODE # Capsicum capability mode #options CAPABILITIES # Capsicum capabilities #options MAC # TrustedBSD MAC Framework #options INCLUDE_CONFIG_FILE # Include this file in kernel # required for netbooting options BOOTP options BOOTP_COMPAT options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=ate0 # alternatively, boot from a MMC/SD memory card #options ROOTDEVNAME=\"ufs:/dev/mmcsd0a\" # kernel/memory size reduction options MUTEX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING options NO_SYSCTL_DESCR options RWLOCK_NOINLINE # Debugging support. Always need this: options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: options DDB # Support DDB. options GDB # Support remote GDB. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Ethernet device mii # Minimal MII support device ate # Atmel AT91 Ethernet friver # I2C device at91_twi # Atmel AT91 Two-wire Interface device iic # I2C generic I/O device driver device iicbus # I2C bus system device pcf8563 # NXP PCF8563 clock/calendar # MMC/SD device at91_mci # Atmel AT91 Multimedia Card Interface options AT91_MCI_HAS_4WIRE device mmc # MMC/SD bus device mmcsd # MMC/SD memory card # DataFlash device at91_spi # Atmel AT91 Serial Peripheral Interface device spibus # SPI bus device at45d # Atmel AT45D device geom_map # GEOM partition mapping # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER # USB support options USB_DEBUG # enable debug msgs device ohci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da # USB device (gadget) support device at91_dci # Atmel's usb device device usfs # emulate a flash device cdce # emulate an ethernet device usb_template # Control of the gadget # watchdog device at91_wdt # Atmel AT91 Watchdog Timer device at91_rtc device at91_ssc #device at91_tc # missing? # NAND Flash - Reference design has Samsung 256MB but others possible device nand # NAND interface on CS3 Index: head/sys/arm/conf/AVILA =================================================================== --- head/sys/arm/conf/AVILA (revision 282498) +++ head/sys/arm/conf/AVILA (revision 282499) @@ -1,158 +1,159 @@ # AVILA -- Gateworks Avila XScale board # kernel configuration file for FreeBSD/arm # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident AVILA +include "std.arm" include "../xscale/ixp425/std.ixp425" # NB: memory mapping is defined in std.avila include "../xscale/ixp425/std.avila" options XSCALE_CACHE_READ_WRITE_ALLOCATE #To statically compile in device wiring instead of /boot/device.hints hints "AVILA.hints" # Default places to look for devices. makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions CONF_CFLAGS=-mcpu=xscale #options HZ=1000 options HZ=100 options DEVICE_POLLING # Debugging for use in -current options KDB #options GDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options NFSCL # Network Filesystem Client options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=npe0 #options BOOTP_WIRED_TO=ath0 #options BOOTP_WIRED_TO=rl0 options BOOTP_COMPAT #options PREEMPTION #options VERBOSE_SYSINIT # Hardware performance counters options HWPMC_HOOKS device hwpmc #device saarm device pci device uart device ixpwdog # watchdog timer device cfi # flash support device cfid # flash disk support device geom_redboot # redboot fis parser # I2C Bus device iicbus device iicbb device iic device ixpiic # I2C bus glue device ds1672 # DS1672 on I2C bus device ad7418 # AD7418 on I2C bus device avila_led device gpio device gpioled device avila_gpio # GPIO pins on J8 device ata device avila_ata # Gateworks CF/IDE support device npe # Network Processing Engine device npe_fw device firmware device qmgr # Q Manager (required by npe) device mii # NB: required by npe device ether device bpf device loop device if_bridge device md device random # Entropy device # Wireless NIC cards device wlan # 802.11 support options IEEE80211_DEBUG options IEEE80211_SUPPORT_TDMA options IEEE80211_SUPPORT_MESH device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_xauth device ath # Atheros NICs device ath_pci # Atheros pci/cardbus glue options ATH_DEBUG options ATH_DIAGAPI #options ATH_TX99_DIAG device ath_rate_sample # SampleRate tx rate control for ath #options AH_DEBUG #options AH_ASSERT #device ath_ar5210 #device ath_ar5211 device ath_ar5212 device ath_rf2413 device ath_rf2417 device ath_rf2425 device ath_rf5111 device ath_rf5112 device ath_rf5413 # device ath_ar5416 options AH_SUPPORT_AR5416 device ath_ar9160 device ath_ar9280 device usb #options USB_DEBUG device ohci device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) #device ural #device zyd #device wlan_amrr Index: head/sys/arm/conf/BEAGLEBONE =================================================================== --- head/sys/arm/conf/BEAGLEBONE (revision 282498) +++ head/sys/arm/conf/BEAGLEBONE (revision 282499) @@ -1,168 +1,168 @@ # # BEAGLEBONE -- Custom configuration for the BeagleBone ARM development # platforms, check out http://www.beagleboard.org/bone and # http://www.beagleboard.org/black. This kernel config file is used for the # original BeagleBone and the BeagleBone Black. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident BEAGLEBONE +include "std.armv6" include "../ti/am335x/std.am335x" makeoptions MODULES_EXTRA="dtb/am335x" # DTrace support options KDTRACE_HOOKS # Kernel DTrace hooks options DDB_CTF # all architectures - kernel ELF linker loads CTF data makeoptions WITH_CTF=1 makeoptions MODULES_EXTRA+="opensolaris dtrace dtrace/lockstat dtrace/profile dtrace/fbt" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PLATFORM options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support -options ARM_NEW_PMAP # Enable the new v6 pmap # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS server support #options NFSD # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:mmcsd0s2\" # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c device am335x_pmic # AM335x Power Management IC (TPC65217) device am335x_rtc # RTC support (power management only) # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # GPIO device gpio device gpioled # ADC support device ti_adc # Watchdog support # If we don't enable the watchdog driver, the system could potentially # reboot automatically because the boot loader might have enabled the # watchdog. device ti_wdt # TI Programmable Realtime Unit support device ti_pruss # Mailbox support device ti_mbox # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device musb device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smscphy device cpsw device bpf # USB Ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet # Device mode support and USFS template device usb_template # Control of the gadget device usfs # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: head/sys/arm/conf/BWCT =================================================================== --- head/sys/arm/conf/BWCT (revision 282498) +++ head/sys/arm/conf/BWCT (revision 282499) @@ -1,114 +1,115 @@ # BWCT -- Custom kernel configuration for the AT91RM9200 boards from bwct.de. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident BWCT +include "std.arm" options VERBOSE_INIT_ARM include "../at91/std.bwct" #To statically compile in device wiring instead of /boot/device.hints hints "BWCT.hints" makeoptions MODULES_OVERRIDE="" #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options BREAK_TO_DEBUGGER options ALT_BREAK_TO_DEBUGGER options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk #options ROOTDEVNAME=\"ufs:md0\" #options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server #options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP_NFSROOT options BOOTP options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions #options NO_SYSCTL_DESCR options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device loop device random device ether device vlan device uart device ate device mii device rlswitch # Debugging for use in -current #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device md device at91_twi # TWI: Two Wire Interface device at91_spi # SPI: device at91_ssc device at91_mci device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards # iic device iic device iicbus device ds1672 # DS1672 on I2C bus #device iicsmb # smb over i2c bridge #device smbus # Bus support, required for smb below. #device smb # SPI bus device spibus #device at45d # at45db642 and maybe others device bpf # Berkeley packet filter #options USB_DEBUG #device ohci #device usb #device umass # Disks/Mass storage - Requires scbus and da Index: head/sys/arm/conf/CAMBRIA =================================================================== --- head/sys/arm/conf/CAMBRIA (revision 282498) +++ head/sys/arm/conf/CAMBRIA (revision 282499) @@ -1,152 +1,153 @@ # CAMBRIA -- Gateworks Cambria 235x boards # kernel configuration file for FreeBSD/arm # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CAMBRIA +include "std.arm" include "../xscale/ixp425/std.ixp435" # NB: memory mapping is defined in std.avila include "../xscale/ixp425/std.avila" options XSCALE_CACHE_READ_WRITE_ALLOCATE #To statically compile in device wiring instead of /boot/device.hints hints "CAMBRIA.hints" # Default places to look for devices. makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions CONF_CFLAGS=-mcpu=xscale makeoptions MODULES_OVERRIDE="" #options HZ=1000 options HZ=100 options DEVICE_POLLING # Debugging for use in -current options KDB #options GDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC options SCHED_4BSD # 4BSD scheduler #options PREEMPTION options INET # InterNETworking options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options NFSCL # Network Filesystem Client options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=npe0 options BOOTP_COMPAT # Hardware performance counters options HWPMC_HOOKS device hwpmc #options VERBOSE_SYSINIT options VERBOSE_INIT_ARM #device saarm device pci device uart device ixpwdog # watchdog timer options IXP4XX_FLASH_SIZE=0x02000000 # stock 2358 comes w/ 32M device cfi # flash support device cfid # flash disk support device geom_redboot # redboot fis parser # I2C Bus device iicbus device iicbb device iic device ixpiic # I2C bus glue device ds1672 # DS1672 on I2C bus device ad7418 # AD7418 on I2C bus device cambria_fled # Font Panel LED on I2C bus device cambria_led # 8-LED latch device gpio device gpioled device cambria_gpio # GPIO pins on J11 device ata device avila_ata # Gateworks CF/IDE support device npe # Network Processing Engine device npe_fw device firmware device qmgr # Q Manager (required by npe) device mii # NB: required by npe device ether device bpf device loop device if_bridge device md device random # Entropy device # Wireless NIC cards device wlan # 802.11 support options IEEE80211_DEBUG options IEEE80211_SUPPORT_TDMA options IEEE80211_SUPPORT_MESH device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_xauth device ath # Atheros NICs device ath_pci # Atheros pci/cardbus glue options ATH_DEBUG options ATH_DIAGAPI options ATH_ENABLE_DFS options ATH_ENABLE_11N #options ATH_TX99_DIAG device ath_rate_sample # SampleRate tx rate control for ath options AH_DEBUG options AH_PRIVATE_DIAG options AH_SUPPORT_AR5416 # NB: for 11n descriptor format device ath_hal # NB: 2 USB 2.0 ports standard device usb options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order #options USB_DEBUG device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) #device ural #device zyd #device wlan_amrr Index: head/sys/arm/conf/CNS11XXNAS =================================================================== --- head/sys/arm/conf/CNS11XXNAS (revision 282498) +++ head/sys/arm/conf/CNS11XXNAS (revision 282499) @@ -1,125 +1,126 @@ # CNS11XXNAS - StarSemi STR9104/Cavium CNS1102 NAS # kernel configuration file for FreeBSD/arm # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CNS11XXNAS +include "std.arm" #options PHYSADDR=0x10000000 #options KERNPHYSADDR=0x10200000 #options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm #options FLASHADDR=0x50000000 #options LOADERRAMADDR=0x00000000 include "../cavium/cns11xx/std.econa" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options HZ=100 options DEVICE_POLLING # Debugging for use in -current options KDB #options GDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles ##options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC #options COMPAT_FREEBSD5 #options COMPAT_FREEBSD6 #options COMPAT_FREEBSD7n options SCHED_ULE # ULE scheduler #options SCHED_4BSD # 4BSD scheduler options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID Partition Tables. #options GEOM_PART_EBR #options GEOM_PART_EBR_COMPAT options GEOM_LABEL # Provides labelization options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server #options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options MUTEX_NOINLINE # Mutex inlines are space hogs options RWLOCK_NOINLINE # rwlock inlines are space hogs options SX_NOINLINE # sx inliens are space hogs #options BOOTP #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=npe0 #options BOOTP_COMPAT #device pci device uart device firmware device mii # Minimal mii routines device ether device bpf device loop device md device random # Entropy device device usb #options USB_DEBUG device ohci device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass device cfi #device udav # Davicom DM9601E USB device geom_label device geom_journal device geom_part_bsd options ROOTDEVNAME=\"ufs:da0s1a\" Index: head/sys/arm/conf/CRB =================================================================== --- head/sys/arm/conf/CRB (revision 282498) +++ head/sys/arm/conf/CRB (revision 282499) @@ -1,110 +1,111 @@ # GENERIC -- Generic kernel configuration file for FreeBSD/arm # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CRB +include "std.arm" options PHYSADDR=0x00000000 options KERNPHYSADDR=0x00200000 options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm options COUNTS_PER_SEC=400000000 include "../xscale/i8134x/std.crb" makeoptions MODULES_OVERRIDE="" #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions CONF_CFLAGS=-mcpu=xscale options HZ=100 options BREAK_TO_DEBUGGER #options DEVICE_POLLING options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL #options MSDOSFS # MSDOS Filesystem options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options INTR_FILTER options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=em0 options BOOTP_COMPAT #options PREEMPTION device loop device ether #device saarm device miibus device rl device em device uart device pci device ata options ATA_STATIC_ID # Static device numbering device scbus # SCSI bus (required for ATA/SCSI) device cd # CD device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) device "7seg" # SCSI Controllers #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # Debugging for use in -current options KDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC options XSCALE_CACHE_READ_WRITE_ALLOCATE device md device random # Entropy device device iopwdog # Floppy drives Index: head/sys/arm/conf/CUBIEBOARD =================================================================== --- head/sys/arm/conf/CUBIEBOARD (revision 282498) +++ head/sys/arm/conf/CUBIEBOARD (revision 282499) @@ -1,142 +1,143 @@ # # CUBIEBOARD -- Custom configuration for the CUBIEBOARD ARM development # platform, check out http://www.cubieboard.org # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD +include "std.armv6" include "../allwinner/std.a10" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" # MMC/SD/SDIO Card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers #options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf device emac # USB ethernet support, requires miibus device miibus # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard.dts makeoptions MODULES_EXTRA=dtb/allwinner Index: head/sys/arm/conf/CUBIEBOARD2 =================================================================== --- head/sys/arm/conf/CUBIEBOARD2 (revision 282498) +++ head/sys/arm/conf/CUBIEBOARD2 (revision 282499) @@ -1,143 +1,144 @@ # # CUBIEBOARD2 -- Custom configuration for the CUBIEBOARD2 ARM development # platform, check out http://www.cubieboard.org # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD2 +include "std.armv6" include "../allwinner/a20/std.a20" options HZ=100 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" # MMC/SD/SDIO Card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers #options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf device emac # USB ethernet support, requires miibus device miibus # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard2.dts makeoptions MODULES_EXTRA=dtb/allwinner Index: head/sys/arm/conf/DB-78XXX =================================================================== --- head/sys/arm/conf/DB-78XXX (revision 282498) +++ head/sys/arm/conf/DB-78XXX (revision 282499) @@ -1,94 +1,95 @@ # # Custom kernel for Marvell DB-78xx boards. # # $FreeBSD$ # ident DB-88F78XX +include "std.arm" include "../mv/discovery/std.db78xxx" options SOC_MV_DISCOVERY #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem options NANDFS # NAND Filesystem options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=mge0 #options ROOTDEVNAME=\"ufs:/dev/da0a\" options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging options ALT_BREAK_TO_DEBUGGER options DDB #options DEADLKRES # Enable the deadlock resolver #options DIAGNOSTIC #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options KDB options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB device pci # Pseudo devices device loop device md device random # Serial ports device uart # Networking device ether device mge # Marvell Gigabit Ethernet controller device mii device e1000phy device bpf # USB options USB_DEBUG # enable debug msgs device usb device ehci device umass device scbus device pass device da # I2C (TWSI) device iic device iicbus device ds133x # SATA device mvs # NAND device nand # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=db78100.dts Index: head/sys/arm/conf/DB-88F5XXX =================================================================== --- head/sys/arm/conf/DB-88F5XXX (revision 282498) +++ head/sys/arm/conf/DB-88F5XXX (revision 282499) @@ -1,91 +1,92 @@ # # Custom kernel for Marvell DB-88F5xxx boards. # # $FreeBSD$ # ident DB-88F5XXX +include "std.arm" include "../mv/orion/std.db88f5xxx" options SOC_MV_ORION #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=mge0 #options ROOTDEVNAME=\"ufs:/dev/da0a\" options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging options ALT_BREAK_TO_DEBUGGER options DDB #options DEADLKRES # Enable the deadlock resolver #options DIAGNOSTIC #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options KDB options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB device pci # Pseudo devices device md device loop device random # Serial ports device uart # Networking device ether device mge # Marvell Gigabit Ethernet controller device mii device e1000phy device bpf options DEVICE_POLLING options HZ=1000 # I2C (TWSI) device iic device iicbus device ds133x # USB options USB_DEBUG # enable debug msgs device usb device ehci device umass device scbus device pass device da # SATA device mvs # Flattened Device Tree options FDT makeoptions FDT_DTS_FILE=db88f5281.dts Index: head/sys/arm/conf/DB-88F6XXX =================================================================== --- head/sys/arm/conf/DB-88F6XXX (revision 282498) +++ head/sys/arm/conf/DB-88F6XXX (revision 282499) @@ -1,97 +1,98 @@ # # Custom kernel for Marvell DB-88F6xxx boards. # # $FreeBSD$ # ident DB-88F6XXX +include "std.arm" include "../mv/kirkwood/std.db88f6xxx" options SOC_MV_KIRKWOOD #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem options NANDFS # NAND Filesystem options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=mge0 #options ROOTDEVNAME=\"ufs:/dev/da0a\" options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging options ALT_BREAK_TO_DEBUGGER options DDB #options DEADLKRES # Enable the deadlock resolver #options DIAGNOSTIC #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options KDB options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB device pci # Pseudo devices device loop device md device random # Serial ports device uart # Networking device ether device mge # Marvell Gigabit Ethernet controller device mii device e1000phy device bpf device cesa # Marvell security engine device crypto device cryptodev # USB options USB_DEBUG # enable debug msgs device usb device ehci device umass device scbus device pass device da # I2C (TWSI) device iic device iicbus # SATA device mvs # NAND device nand # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=db88f6281.dts Index: head/sys/arm/conf/DOCKSTAR =================================================================== --- head/sys/arm/conf/DOCKSTAR (revision 282498) +++ head/sys/arm/conf/DOCKSTAR (revision 282499) @@ -1,167 +1,168 @@ # # Custom kernel for Seagate DockStar (Marvell SheevaPlug based) devices. # # $FreeBSD$ # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ # #NO_UNIVERSE ident DOCKSTAR +include "std.arm" include "../mv/kirkwood/std.db88f6xxx" makeoptions FDT_DTS_FILE=dockstar.dts options SOC_MV_KIRKWOOD options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options SOFTUPDATES options CD9660 # ISO 9660 filesystem options FFS # Berkeley Fast Filesystem options TMPFS # Efficient memory filesystem options MSDOSFS # MS DOS File System (FAT, FAT32) options NULLFS # NULL filesystem options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_ELI # Disk encryption. options GEOM_LABEL # Providers labelization. options GEOM_PART_GPT # GPT partitioning # Flattened Device Tree device fdt options FDT options FDT_DTB_STATIC # Misc pseudo devices device bpf # Required for DHCP device firmware # firmware(9) required for USB wlan device gif # IPv6 and IPv4 tunneling device loop # Network loopback device md # Memory/malloc disk device pty # BSD-style compatibility pseudo ttys device random # Entropy device device tun # Packet tunnel. device ether # Required for all ethernet devices device vlan # 802.1Q VLAN support device wlan # 802.11 WLAN support # cam support for umass and ahci device scbus device pass device da # Serial ports device uart # Networking device mge # Marvell Gigabit Ethernet controller device mii device e1000phy # USB options USB_HOST_ALIGN=32 # Align DMA to cacheline #options USB_DEBUG # Compile in USB debug support device usb # Basic usb support device ehci # USB host controller device umass # Mass storage device uhid # Human-interface devices device rum # Ralink Technology RT2501USB wireless NICs device uath # Atheros AR5523 wireless NICs device ural # Ralink Technology RT2500USB wireless NICs device zyd # ZyDAS zb1211/zb1211b wireless NICs device urtw # Realtek RTL8187B/L USB device upgt # Conexant/Intersil PrismGT SoftMAC USB device u3g # USB-based 3G modems (Option, Huawei, Sierra) # I2C (TWSI) device iic device iicbus # Sound device sound device snd_uaudio #crypto device cesa # Marvell security engine device crypto device cryptodev # IPSec device enc options IPSEC options IPSEC_NAT_T options TCP_SIGNATURE # include support for RFC 2385 # IPFW options IPFIREWALL options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options IPFIREWALL_NAT options LIBALIAS options DUMMYNET options IPDIVERT #PF device pf device pflog device pfsync # ALTQ, required for PF options ALTQ # Basic ALTQ support options ALTQ_CBQ # Class Based Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable #options ALTQ_DEBUG # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER options ALT_BREAK_TO_DEBUGGER options DDB options KDB #options DIAGNOSTIC options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB # Enable these options for nfs root configured via BOOTP. options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=mge0 # If not using BOOTP, use something like one of these... #options ROOTDEVNAME=\"ufs:/dev/da0a\" options ROOTDEVNAME=\"ufs:/dev/da0s1a\" #options ROOTDEVNAME=\"ufs:/dev/da0p10\" #options ROOTDEVNAME=\"nfs:192.168.0.254/dreamplug\" Index: head/sys/arm/conf/DREAMPLUG-1001 =================================================================== --- head/sys/arm/conf/DREAMPLUG-1001 (revision 282498) +++ head/sys/arm/conf/DREAMPLUG-1001 (revision 282499) @@ -1,183 +1,184 @@ # Kernel config for GlobalScale Technologies DreamPlug version 1001. # # This is for units that are version 10, revision 01, with NOR SPI flash. # These units are identified with the number "1001" on the S/N label. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ # #NO_UNIVERSE ident DREAMPLUG-1001 +include "std.arm" include "../mv/kirkwood/std.db88f6xxx" makeoptions FDT_DTS_FILE=dreamplug-1001.dts options SOC_MV_KIRKWOOD options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options SOFTUPDATES options TMPFS # Efficient memory filesystem options CD9660 # ISO 9660 filesystem options FFS # Berkeley Fast Filesystem options MSDOSFS # MS DOS File System (FAT, FAT32) options NULLFS # NULL filesystem options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_ELI # Disk encryption. options GEOM_LABEL # Providers labelization. options GEOM_PART_GPT # GPT partitioning # Flattened Device Tree device fdt options FDT options FDT_DTB_STATIC # Misc pseudo devices device bpf # Required for DHCP device firmware # firmware(9) required for USB wlan device gif # IPv6 and IPv4 tunneling device loop # Network loopback device md # Memory/malloc disk device pty # BSD-style compatibility pseudo ttys device random # Entropy device device tun # Packet tunnel. device ether # Required for all ethernet devices device vlan # 802.1Q VLAN support device wlan # 802.11 WLAN support # cam support for umass and ahci device scbus device pass device da device cd # Serial ports device uart # Networking device mge # Marvell Gigabit Ethernet controller device mii device e1000phy # USB options USB_HOST_ALIGN=32 # Align DMA to cacheline #options USB_DEBUG # Compile in USB debug support device usb # Basic usb support device ehci # USB host controller device umass # Mass storage device uhid # Human-interface devices device rum # Ralink Technology RT2501USB wireless NICs device uath # Atheros AR5523 wireless NICs device ural # Ralink Technology RT2500USB wireless NICs device zyd # ZyDAS zb1211/zb1211b wireless NICs device urtw # Realtek RTL8187B/L USB device upgt # Conexant/Intersil PrismGT SoftMAC USB device u3g # USB-based 3G modems (Option, Huawei, Sierra) # I2C (TWSI) device iic device iicbus # SATA device mvs device ahci # Sound device sound device snd_uaudio #crypto device cesa # Marvell security engine device crypto device cryptodev # IPSec device enc options IPSEC options IPSEC_NAT_T options TCP_SIGNATURE # include support for RFC 2385 # IPFW options IPFIREWALL options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=100 options IPFIREWALL_NAT options LIBALIAS options DUMMYNET options IPDIVERT #PF device pf device pflog device pfsync # ALTQ, required for PF options ALTQ # Basic ALTQ support options ALTQ_CBQ # Class Based Queueing options ALTQ_RED # Random Early Detection options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler options ALTQ_CDNR # Traffic conditioner options ALTQ_PRIQ # Priority Queueing options ALTQ_NOPCC # Required if the TSC is unusable #options ALTQ_DEBUG # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER options ALT_BREAK_TO_DEBUGGER options DDB options KDB #options DIAGNOSTIC options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB # Enable these options for nfs root configured via BOOTP. options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=mge0 # If not using BOOTP, use something like one of these... #options ROOTDEVNAME=\"ufs:/dev/da1a\" options ROOTDEVNAME=\"ufs:/dev/da1s1a\" #options ROOTDEVNAME=\"ufs:/dev/da1p10\" #options ROOTDEVNAME=\"nfs:192.168.0.254/dreamplug\" # To use this configuration with the (rare) model 1001N (nand flash), # create a kernel config file that looks like this: # # include DREAMPLUG-1001 # nomakeoptions FDT_DTS_FILE # makeoptions FDT_DTS_FILE=dreamplug-1001N.dts # device nand Index: head/sys/arm/conf/EA3250 =================================================================== --- head/sys/arm/conf/EA3250 (revision 282498) +++ head/sys/arm/conf/EA3250 (revision 282499) @@ -1,99 +1,100 @@ # # Custom kernel for EA3250 boards. # # $FreeBSD$ # ident EA3250 +include "std.arm" include "../lpc/std.lpc" hints "EA3250.hints" makeoptions MODULES_OVERRIDE="" #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options MSDOSFS options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=lpe0 #options ROOTDEVNAME=\"ufs:/dev/da0a\" options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging options ALT_BREAK_TO_DEBUGGER options DDB #options DEADLKRES # Enable the deadlock resolver #options DIAGNOSTIC #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options KDB options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB # Pseudo devices device loop device md device pty device random # Serial ports device uart # Networking device ether device mii device bpf device lpe # USB options USB_DEBUG device usb device ohci device umass device scbus device pass device da device mmc device mmcsd device lpcmmc device gpio device gpioled device lpcgpio device spibus device lpcspi device ssd1289 device lpcfb # DMAC device dmac # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=ea3250.dts Index: head/sys/arm/conf/EB9200 =================================================================== --- head/sys/arm/conf/EB9200 (revision 282498) +++ head/sys/arm/conf/EB9200 (revision 282499) @@ -1,114 +1,115 @@ # EB9200 - Custom kernel for the Embest ATEB9200 AT91RM9200 evaluation board. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident EB9200 +include "std.arm" include "../at91/std.eb9200" # The AT91 platform doesn't use /boot/loader, so we have to statically wire # hints. hints "EB9200.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk #options ROOTDEVNAME=\"ufs:/dev/da0s1a\" options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP_NFSROOT options BOOTP options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions #options NO_SYSCTL_DESCR # Disable the inlining of mutex, rwlock and sx locks. These eat up a lot # of space. options MUTEX_NOINLINE options RWLOCK_NOINLINE options SX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device random device loop device ether device uart device ate device miibus #device lxtphy device at91_cfata device ata # Debugging for use in -current #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed device md device at91_twi # TWI: Two Wire Interface device at91_spi # SPI: device spibus # MMC/SD device at91_mci device mmc device mmcsd # iic device iic device iicbus device icee device bpf # USB support options USB_DEBUG # enable debug msgs device ohci # OHCI localbus->USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB device (gadget) support #device at91_dci # Atmel's usb device #device usfs # emulate a flash #device cdce # emulate an ethernet #device usb_template # Control of the gadget Index: head/sys/arm/conf/EFIKA_MX =================================================================== --- head/sys/arm/conf/EFIKA_MX (revision 282498) +++ head/sys/arm/conf/EFIKA_MX (revision 282499) @@ -1,183 +1,184 @@ # # Kernel configuration for Efika MX Smarttop/Smartbook boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident EFIKA_MX +include "std.armv6" include "../freescale/imx/std.imx51" makeoptions WITHOUT_MODULES="ahc" options SOC_IMX51 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS #options MD_ROOT # MD is a potential root device options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PLATFORM options INCLUDE_CONFIG_FILE # Include this file in kernel options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options GDB # Support remote GDB options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 options ROOTDEVNAME=\"ufs:ada0s2a\" # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER device ata device atapci # Only for helper functions device imxata options ATA_STATIC_ID # Static device numbering device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB Ethernet, requires miibus device miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=efikamx.dts # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support device sc device kbdmux options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 device ukbd # Allow keyboard like HIDs to control console device ums Index: head/sys/arm/conf/EP80219 =================================================================== --- head/sys/arm/conf/EP80219 (revision 282498) +++ head/sys/arm/conf/EP80219 (revision 282499) @@ -1,111 +1,112 @@ # EP80219 -- Custom kernel configuration file for FreeBSD/arm on the EP80219 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident EP80219 +include "std.arm" options PHYSADDR=0xa0000000 options KERNPHYSADDR=0xa0200000 options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm #options ARM32_NEW_VM_LAYOUT include "../xscale/i80321/std.ep80219" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions CONF_CFLAGS=-mcpu=xscale options HZ=100 #options DEVICE_POLLING options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Providers labelization. options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=fxp0 options BOOTP_COMPAT #options PREEMPTION device loop device ether #device saarm device miibus device fxp device uart device pci device ata options ATA_STATIC_ID # Static device numbering device scbus # SCSI bus (required for ATA/SCSI) device cd # CD device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) # SCSI Controllers device iopwdog # I80321 Watchdog device dma # I80321 DMA Controller # Debugging for use in -current options KDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC options XSCALE_CACHE_READ_WRITE_ALLOCATE device md device random # Entropy device # Floppy drives options INCLUDE_CONFIG_FILE # Include this file in kernel #options VERBOSE_SYSINIT options VERBOSE_INIT_ARM device bpf #options ROOTDEVNAME=\"ufs:ada0s1a\" Index: head/sys/arm/conf/ETHERNUT5 =================================================================== --- head/sys/arm/conf/ETHERNUT5 (revision 282498) +++ head/sys/arm/conf/ETHERNUT5 (revision 282499) @@ -1,162 +1,163 @@ # Kernel configuration for Ethernut 5 boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident ETHERNUT5 +include "std.arm" include "../at91/std.ethernut5" # To statically compile in device wiring instead of /boot/device.hints hints "ETHERNUT5.hints" #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking #options INET6 # IPv6 communications protocols #options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories #options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework #options GEOM_PART_GPT # GUID Partition Tables. #options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support #options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. #options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) #options AUDIT # Security event auditing #options CAPABILITY_MODE # Capsicum capability mode #options CAPABILITIES # Capsicum capabilities #options MAC # TrustedBSD MAC Framework #options INCLUDE_CONFIG_FILE # Include this file in kernel # required for netbooting options BOOTP options BOOTP_COMPAT options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=ate0 # alternatively, boot from a MMC/SD memory card #options ROOTDEVNAME=\"ufs:/dev/mmcsd0a\" # kernel/memory size reduction options MUTEX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING options NO_SYSCTL_DESCR options RWLOCK_NOINLINE # Debugging support. Always need this: #options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: #options DDB # Support DDB. #options GDB # Support remote GDB. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Ethernet device mii # Minimal MII support device ate # Atmel AT91 Ethernet driver # I2C device at91_twi # Atmel AT91 Two-wire Interface device iic # I2C generic I/O device driver device iicbus # I2C bus system device pcf8563 # NXP PCF8563 clock/calendar # MMC/SD device at91_mci # Atmel AT91 Multimedia Card Interface options AT91_MCI_HAS_4WIRE device mmc # MMC/SD bus device mmcsd # MMC/SD memory card # DataFlash device at91_spi # Atmel AT91 Serial Peripheral Interface device spibus # SPI bus device at45d # Atmel AT45D device geom_map # GEOM partition mapping # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # SCSI peripherals #device scbus # SCSI bus (required for ATA/SCSI) #device ch # SCSI media changers #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct ATA/SCSI access) #device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER # USB support #options USB_DEBUG # enable debug msgs device ohci # OHCI USB interface device usb # USB Bus (required) #device umass # Disks/Mass storage - Requires scbus and da # watchdog device at91_wdt # Atmel AT91 Watchdog Timer Index: head/sys/arm/conf/EXYNOS5.common =================================================================== --- head/sys/arm/conf/EXYNOS5.common (revision 282498) +++ head/sys/arm/conf/EXYNOS5.common (revision 282499) @@ -1,136 +1,137 @@ # # Kernel configuration for Samsung Exynos 5 SoC. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ makeoptions WERROR="-Werror" +include "std.armv6" options HZ=100 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 options ROOTDEVNAME=\"ufs:/dev/da0\" # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device dwmmc # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device ehci #device ohci device xhci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs # Serial ports device uart # I2C (TWSI) device iic device iicbus # SPI device spibus device exynos_spi # Ethernet device ether device mii device smsc device smscphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter Index: head/sys/arm/conf/GUMSTIX =================================================================== --- head/sys/arm/conf/GUMSTIX (revision 282498) +++ head/sys/arm/conf/GUMSTIX (revision 282499) @@ -1,92 +1,93 @@ # GUMSTIX -- Custom configuration for the Gumstix Basix and Connex boards from # gumstix.com # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident GUMSTIX +include "std.arm" cpu CPU_XSCALE_PXA2X0 # This probably wants to move somewhere else. Maybe we can create a basic # PXA2X0 config, then make a GUMSTIX config that includes the basic one, # adds the smc and smcphy devices and pulls in this hints file. hints "GUMSTIX.hints" options PHYSADDR=0xa0000000 options KERNPHYSADDR=0xa0200000 options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm include "../xscale/pxa/std.pxa" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options HZ=100 #options DEVICE_POLLING options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCL options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options BOOTP options BOOTP_NFSROOT options BOOTP_WIRED_TO=smc0 options BOOTP_COMPAT options BOOTP_NFSV3 options BOOTP_BLOCKSIZE=4096 options PREEMPTION device loop device ether device mii device mii_bitbang device smc device smcphy device uart device uart_ns8250 # Debugging for use in -current options KDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device md device random # Entropy device Index: head/sys/arm/conf/HL200 =================================================================== --- head/sys/arm/conf/HL200 (revision 282498) +++ head/sys/arm/conf/HL200 (revision 282499) @@ -1,144 +1,145 @@ # Kernel configuration for the AT91RM9200 based Hot-e configuration file # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident HL200 +include "std.arm" include "../at91/std.hl200" #To statically compile in device wiring instead of /boot/device.hints hints "KB920X.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk #options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server #options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP_NFSROOT options BOOTP options BOOTP_NFSV3 options BOOTP_WIRED_TO=ate0 options BOOTP_COMPAT options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions #options NO_SYSCTL_DESCR options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device random device loop device ether device uart device ate device mii device lxtphy # Debugging for use in -current #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed device md device at91_twi # TWI: Two Wire Interface device at91_spi # SPI: device spibus # MMC/SD device at91_mci device mmc device mmcsd # iic device iic device iicbus device icee device bpf # USB support options USB_DEBUG # enable debug msgs device ohci # OHCI localbus->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device uhid # "Human Interface Devices" device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device urio # Diamond Rio 500 MP3 player # USB Serial devices device uark # Technologies ARK3116 based serial adapters device ubsa # Belkin F5U103 and compatible serial adapters #device ubser # not yet converted. device uftdi # For FTDI usb serial adapters device uipaq # Some WinCE based devices device uplcom # Prolific PL-2303 serial adapters device uslcom # SI Labs CP2101/CP2102 serial adapters device uvisor # Visor and Palm devices device uvscom # USB serial support for DDI pocket's PHS # USB Ethernet, requires miibus device miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless device rum # Ralink Technology RT2501USB wireless NICs device uath # Atheros AR5523 wireless NICs device ural # Ralink Technology RT2500USB wireless NICs device zyd # ZyDAS zd1211/zd1211b wireless NICs # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm Index: head/sys/arm/conf/HL201 =================================================================== --- head/sys/arm/conf/HL201 (revision 282498) +++ head/sys/arm/conf/HL201 (revision 282499) @@ -1,147 +1,148 @@ # Kernel configuration for the AT91SAM9G20 based Hot-e configuration file # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident HL201 +include "std.arm" include "../at91/std.hl201" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NANDFS # NAND file system options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server #options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 #options BOOTP_COMPAT options ALT_BREAK_TO_DEBUGGER options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device random device loop device ether device uart device ate device at91_wdt device mii device lxtphy # I2C device at91_twi # Atmel AT91 Two-wire Interface device iic # I2C generic I/O device driver device iicbus # I2C bus system # Debugging for use in -current #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device md device bpf # USB support device ohci # OHCI localbus->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device uhid # "Human Interface Devices" #device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da # USB Ethernet, requires miibus device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm options ROOTDEVNAME=\"ufs:da0s1a\" # NAND Flash - my board as 128MB Samsung part, YMMV. device nand # NAND interface on CS3 # SPI: Data Flash device at91_spi # SPI: device spibus device at45d # at45db642 and maybe others # Coming soon, but not yet options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=hl201.dts options EARLY_PRINTF options SOCDEV_PA=0xfc000000 options SOCDEV_VA=0xdc000000 Index: head/sys/arm/conf/IMX53 =================================================================== --- head/sys/arm/conf/IMX53 (revision 282498) +++ head/sys/arm/conf/IMX53 (revision 282499) @@ -1,176 +1,177 @@ # # Kernel configuration for i.MX53 boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX53 +include "std.armv6" include "../freescale/imx/std.imx53" options SOC_IMX53 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PLATFORM options INCLUDE_CONFIG_FILE # Include this file in kernel options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options GDB # Support remote GDB options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # Ethernet device ffec # Freescale Fast Ethernet Controller device miibus # Standard mii bus # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER device ata device atapci # Only for helper functions device imxata options ATA_STATIC_ID # Static device numbering device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ukbd # Allow keyboard like HIDs to control console device ums # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # MMC #device sdhci # SD controller #device mmc # SD/MMC protocol #device mmcsd # SDCard disk device # Flattened Device Tree options FDT # Configure using FDT/DTB data # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support #device sc #device vt #device kbdmux #options SC_DFLT_FONT # compile font in #makeoptions SC_DFLT_FONT=cp437 Index: head/sys/arm/conf/IMX6 =================================================================== --- head/sys/arm/conf/IMX6 (revision 282498) +++ head/sys/arm/conf/IMX6 (revision 282499) @@ -1,166 +1,167 @@ # # Kernel configuration for Freescale i.MX6 systems. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX6 +include "std.armv6" include "../freescale/imx/std.imx6" options SOC_IMX6 options HZ=500 # Scheduling quantum is 2 milliseconds. options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options INCLUDE_CONFIG_FILE # Include this file in kernel options PLATFORM options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options GDB # Support remote GDB. # Other debugging options... options ALT_BREAK_TO_DEBUGGER # Use to enter debugger. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 # U-Boot stuff lives on slice 1, FreeBSD on slice 2. options ROOTDEVNAME=\"ufs:mmcsd0s2a\" # Pseudo devices. device loop # Network loopback device random # Entropy device device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module device ether # Ethernet support device miibus # Required for ethernet device bpf # Berkeley packet filter (required for DHCP) # General-purpose input/output device gpio # Serial (COM) ports device uart # Multi-uart driver # SDCard device sdhci # SD controller device mmc # SD/MMC protocol device mmcsd # SDCard disk device # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB modems #device ukbd # Allow keyboard like HIDs to control console #device ums # USB mouse # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support # Wandboard has no video console support yet. #device sc #device kbdmux #options SC_DFLT_FONT # compile font in #makeoptions SC_DFLT_FONT=cp437 # Flattened Device Tree options FDT # Configure using FDT/DTB data makeoptions MODULES_EXTRA=dtb/imx6 # SoC-specific devices device ffec # Freescale Fast Ethernet Controller device fsliic # Freescale i2c/iic device iic # iic protocol device iicbus # iic bus #device imxwdt # Watchdog. WARNING: can't be disabled!!! Index: head/sys/arm/conf/IQ31244 =================================================================== --- head/sys/arm/conf/IQ31244 (revision 282498) +++ head/sys/arm/conf/IQ31244 (revision 282499) @@ -1,110 +1,111 @@ # IQ31244 -- Custom kernel configuration file for FreeBSD/arm on the IQ31244 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IQ31244 +include "std.arm" options PHYSADDR=0xa0000000 options KERNPHYSADDR=0xa0200000 options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm options FLASHADDR=0xf0000000 options LOADERRAMADDR=0x00000000 include "../xscale/i80321/std.iq31244" makeoptions MODULES_OVERRIDE="" #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions CONF_CFLAGS=-mcpu=xscale options HZ=100 #options DEVICE_POLLING options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=em0 options BOOTP_COMPAT #options PREEMPTION device loop device ether #device saarm device miibus device rl device em device uart device pci device ata options ATA_STATIC_ID # Static device numbering device scbus # SCSI bus (required for ATA/SCSI) device cd # CD device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) # SCSI Controllers device iopwdog # I80321 Watchdog device dma # I80321 DMA Controller device aau # I80321 Application Accelerator Unit device "iq31244_7seg" # IQ31244 7 seg #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # Debugging for use in -current options KDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC options XSCALE_CACHE_READ_WRITE_ALLOCATE device md device random # Entropy device # Floppy drives Index: head/sys/arm/conf/KB920X =================================================================== --- head/sys/arm/conf/KB920X (revision 282498) +++ head/sys/arm/conf/KB920X (revision 282499) @@ -1,154 +1,155 @@ # KB920X -- Custom kernel configuration for the KB9202 (no letter, A and B) # AT91RM9200 evaluation boards from kwikbyte.com. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident KB920X +include "std.arm" include "../at91/std.kb920x" # The AT91 platform doesn't use /boot/loader, so we have to statically wire # hints. hints "KB920X.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server #options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions #options NO_SYSCTL_DESCR # Disable the inlining of mutex, rwlock and sx locks. These eat up a lot # of space. options MUTEX_NOINLINE options RWLOCK_NOINLINE options SX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device random device loop device ether device uart device ate device mii device lxtphy # Debugging for use in -current #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed device md device at91_twi # TWI: Two Wire Interface device at91_spi # SPI: device spibus # MMC/SD device at91_mci device mmc device mmcsd # iic device iic device iicbus device icee device bpf # USB support options USB_DEBUG # enable debug msgs device ohci # OHCI localbus->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device uhid # "Human Interface Devices" device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device urio # Diamond Rio 500 MP3 player # USB Serial devices device uark # Technologies ARK3116 based serial adapters device ubsa # Belkin F5U103 and compatible serial adapters device uftdi # For FTDI usb serial adapters device uipaq # Some WinCE based devices device uplcom # Prolific PL-2303 serial adapters device uslcom # SI Labs CP2101/CP2102 serial adapters device uvisor # Visor and Palm devices device uvscom # USB serial support for DDI pocket's PHS # USB Ethernet, requires miibus device miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless device rum # Ralink Technology RT2501USB wireless NICs device uath # Atheros AR5523 wireless NICs device ural # Ralink Technology RT2500USB wireless NICs device zyd # ZyDAS zd1211/zd1211b wireless NICs # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # USB device (gadget) support device at91_dci # Atmel's usb device device usfs # emulate a flash device cdce # emulate an ethernet device usb_template # Control of the gadget options IEEE80211_SUPPORT_MESH options AH_SUPPORT_AR5416 Index: head/sys/arm/conf/LN2410SBC =================================================================== --- head/sys/arm/conf/LN2410SBC (revision 282498) +++ head/sys/arm/conf/LN2410SBC (revision 282499) @@ -1,89 +1,90 @@ # LN2410SBC -- Custom kernel configuration for the LN2410SBC # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident LN2410SBC +include "std.arm" include "../samsung/s3c2xx0/std.ln2410sbc" #To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. makeoptions MODULES_OVERRIDE="" device board_ln2410sbc makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options HZ=100 options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options ROOTDEVNAME=\"ufs:da0s1\" #options BOOTP #options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info #options NFSCL # Network Filesystem Client #options NFS_ROOT # NFS usable as root device options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options SX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device random device loop device ether device bpf device uart # Debugging for use in -current options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed device md options USB_DEBUG # enable debug msgs device usb device ohci device umass device scbus # SCSI bus (required for da) device da # Direct Access (disks) Index: head/sys/arm/conf/NSLU =================================================================== --- head/sys/arm/conf/NSLU (revision 282498) +++ head/sys/arm/conf/NSLU (revision 282499) @@ -1,119 +1,120 @@ # NSLU - kernel configuration file for FreeBSD/arm on Linksys NSLU2 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident NSLU +include "std.arm" # XXX What is defined in std.avila does not exactly match the following: #options PHYSADDR=0x10000000 #options KERNPHYSADDR=0x10200000 #options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm #options FLASHADDR=0x50000000 #options LOADERRAMADDR=0x00000000 include "../xscale/ixp425/std.ixp425" # NB: memory mapping is defined in std.avila (see also comment above) include "../xscale/ixp425/std.avila" options XSCALE_CACHE_READ_WRITE_ALLOCATE #To statically compile in device wiring instead of /boot/device.hints hints "NSLU.hints" # Default places to look for devices. makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions CONF_CFLAGS=-mcpu=xscale options HZ=100 options DEVICE_POLLING # Debugging for use in -current options KDB #options GDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC options SCHED_ULE # ULE scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # Network Filesystem Client options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options MUTEX_NOINLINE # Mutex inlines are space hogs options RWLOCK_NOINLINE # rwlock inlines are space hogs options SX_NOINLINE # sx inliens are space hogs options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=npe0 options BOOTP_COMPAT device pci device uart # I2C Bus device iicbus device iicbb device iic device ixpiic # I2C bus glue device ixpwdog # watchdog timer device npe # Network Processing Engine device npe_fw device firmware device qmgr # Q Manager (required by npe) device mii # Minimal mii routines device rlphy # NSLU2 uses Realtek PHY attached to npe device ether device bpf device loop device md device random # Entropy device device usb options USB_DEBUG device ohci device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) Index: head/sys/arm/conf/PANDABOARD =================================================================== --- head/sys/arm/conf/PANDABOARD (revision 282498) +++ head/sys/arm/conf/PANDABOARD (revision 282499) @@ -1,155 +1,155 @@ # # PANDABOARD -- Custom configuration for the PandaBoard ARM development # platform, check out www.pandaboard.org # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident PANDABOARD # This probably wants to move somewhere else. Maybe we can create a basic # OMAP4340 config, then make a PANDABOARD config that includes the basic one, # adds the start addresses and custom devices plus pulls in this hints file. hints "PANDABOARD.hints" +include "std.armv6" include "../ti/omap4/pandaboard/std.pandaboard" options HZ=100 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PLATFORM options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores -options ARM_NEW_PMAP # Enable the new v6 pmap # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device device pl310 # PL310 L2 cache controller # GPIO device gpio # The following enables MFS as root, this seems similar to an initramfs or initrd # as used in Linux. #options MD_ROOT #options MD_ROOT_SIZE=7560 # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device ohci device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smc device smcphy device bpf # USB Ethernet support, requires miibus device miibus #device axe # ASIX Electronics USB Ethernet device smsc # SMSC LAN95xx USB Ethernet # OMAP-specific devices device ti_sdma device twl device twl_vreg device twl_clks # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=pandaboard.dts Index: head/sys/arm/conf/QILA9G20 =================================================================== --- head/sys/arm/conf/QILA9G20 (revision 282498) +++ head/sys/arm/conf/QILA9G20 (revision 282499) @@ -1,155 +1,156 @@ # Kernel configuration for Calao Syatems QIL-A9G20 development card # http://www.calao-systems.com # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident QILA9G20 +include "std.arm" include "../at91/std.qila9g20" #To statically compile in device wiring instead of /boot/device.hints hints "QILA9G20.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server #options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 #options BOOTP_COMPAT options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options ALT_BREAK_TO_DEBUGGER options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging for use in -current #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device random device loop device bpf device ether device md device uart # Serial Ports # Ethernet device ate # Ethernet Driver device mii option AT91_ATE_USE_RMII device at91_twi # TWI: Two Wire Interface (EEPROM) device at91_wdt # WDT: Watchdog timer # NOTE: SPI DataFlash and mci/mmc/mmcsd have hardware # confilict on this card. Use one or the other. # see board_sam9g20ek.c # SPI: Data Flash #device at91_spi # SPI: #device spibus #device at45d # at45db642 and maybe others # MMC/SD device at91_mci device mmc device mmcsd option AT91_MCI_HAS_4WIRE # iic device iic device iicbus device icee # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support device ohci # OHCI localbus->USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ulpt # Printer #device udbp # USB Double Bulk Pipe devices # USB Ethernet, requires miibus device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm Index: head/sys/arm/conf/RK3188 =================================================================== --- head/sys/arm/conf/RK3188 (revision 282498) +++ head/sys/arm/conf/RK3188 (revision 282499) @@ -1,136 +1,137 @@ # # Kernel configuration for Rockchip RK3188 systems. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident RK3188 +include "std.armv6" include "../rockchip/std.rk30xx" options HZ=100 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options DIAGNOSTIC # Root mount from MMC/SD card options ROOTDEVNAME=\"ufs:/dev/mmcsd0\" # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device dwmmc # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device dwcotg # DWC OTG controller device umass # Ethernet device loop device ether device mii device bpf # Wireless NIC cards options IEEE80211_DEBUG options IEEE80211_AMPDU_AGE options IEEE80211_SUPPORT_MESH options IEEE80211_SUPPORT_TDMA device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device urtwn device urtwnfw device firmware # Used by the above # USB Ethernet support, requires miibus device miibus device udav # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: head/sys/arm/conf/RPI-B =================================================================== --- head/sys/arm/conf/RPI-B (revision 282498) +++ head/sys/arm/conf/RPI-B (revision 282499) @@ -1,143 +1,143 @@ # # RPI-B -- Custom configuration for the Raspberry Pi # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident RPI-B +include "std.armv6" include "../broadcom/bcm2835/std.rpi" include "../broadcom/bcm2835/std.bcm2835" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PLATFORM options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support -options ARM_NEW_PMAP # Enable the new v6 pmap # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 #options ROOTDEVNAME=\"ufs:mmcsd0s2\" device bpf device loop device ether device uart device pty device snp device pl011 # Comment following lines for boot console on serial port device vt device kbdmux device ukbd device sdhci device mmc device mmcsd device gpio device gpioled # I2C device iic device iicbus device bcm2835_bsc device md device random # Entropy device # USB support device usb options USB_DEBUG device dwcotg # DWC OTG controller # USB storage support device scbus device da device umass # USB ethernet support device smcphy device mii device smsc # SPI device spibus device bcm2835_spi device vchiq device sound # Flattened Device Tree options FDT # Configure using FDT/DTB data # Note: DTB is normally loaded and modified by RPi boot loader, then # handed to kernel via U-Boot and ubldr. #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=rpi.dts makeoptions MODULES_EXTRA=dtb/rpi Index: head/sys/arm/conf/RPI2 =================================================================== --- head/sys/arm/conf/RPI2 (revision 282498) +++ head/sys/arm/conf/RPI2 (revision 282499) @@ -1,143 +1,143 @@ # # RPI2 -- Custom configuration for the Raspberry Pi 2 # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident RPI2 +include "std.armv6" include "../broadcom/bcm2835/std.rpi" include "../broadcom/bcm2835/std.bcm2836" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PLATFORM options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support -options ARM_NEW_PMAP # Enable the new v6 pmap # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 options ROOTDEVNAME=\"ufs:mmcsd0s2\" device bpf device loop device ether device uart device pty device snp device pl011 # Comment following lines for boot console on serial port device vt device kbdmux device ukbd device sdhci device mmc device mmcsd device gpio device gpioled # I2C device iic device iicbus device bcm2835_bsc device md device random # Entropy device # USB support device usb options USB_DEBUG device dwcotg # DWC OTG controller # USB storage support device scbus device da device umass # USB ethernet support device smcphy device mii device smsc # SPI device spibus device bcm2835_spi device vchiq device sound # Flattened Device Tree options FDT # Configure using FDT/DTB data # Note: DTB is normally loaded and modified by RPi boot loader, then # handed to kernel via U-Boot and ubldr. #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=rpi2.dts makeoptions MODULES_EXTRA=dtb/rpi Index: head/sys/arm/conf/SAM9260EK =================================================================== --- head/sys/arm/conf/SAM9260EK (revision 282498) +++ head/sys/arm/conf/SAM9260EK (revision 282499) @@ -1,184 +1,185 @@ # Kernel configuration for Atmel SAM9260-EK eval board # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident SAM9260EK +include "std.arm" include "../at91/std.sam9260ek" # To statically compile in device wiring instead of /boot/device.hints hints "SAM9260EK.hints" #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions MODULES_OVERRIDE="" options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking #options INET6 # IPv6 communications protocols #options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories #options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device options NANDFS # NAND file system options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme #options GEOM_PART_GPT # GUID Partition Tables. #options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support #options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. #options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) #options AUDIT # Security event auditing #options CAPABILITY_MODE # Capsicum capability mode #options CAPABILITIES # Capsicum capabilities #options MAC # TrustedBSD MAC Framework #options INCLUDE_CONFIG_FILE # Include this file in kernel # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 # alternatively, boot from a MMC/SD memory card #options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" # Alternatively, boot from a USB card. options ROOTDEVNAME=\"ufs:/dev/da0s1a\" # kernel/memory size reduction options MUTEX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING options NO_SYSCTL_DESCR options RWLOCK_NOINLINE # Debugging support. Always need this: #options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: #options DDB # Support DDB. #options GDB # Support remote GDB. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Ethernet device mii # Minimal MII support device ate # Atmel AT91 Ethernet driver # I2C device at91_twi # Atmel AT91 Two-wire Interface device iic # I2C generic I/O device driver device iicbus # I2C bus system device icee # I2C eeprom # MMC/SD # See comment for DataFlash below device at91_mci # Atmel AT91 Multimedia Card Interface options AT91_MCI_HAS_4WIRE # 4 wires options AT91_MCI_SLOT_B # Wired to slot B device mmc # MMC/SD bus device mmcsd # MMC/SD memory card # DataFlash # The DataFlash and MMC card are wired together, so we must pick one or the # other. This is due to pin mux, and also due to the design of the # SAM9260EK board. SLOT A wouldn't have this issue. #device at91_spi # Atmel AT91 Serial Peripheral Interface #device spibus # SPI bus #device at45d # Atmel AT45D #device geom_map # GEOM partition mapping # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD/DVD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER # USB support #options USB_DEBUG # enable debug msgs device ohci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da # watchdog device at91_wdt # Atmel AT91 Watchdog Timer # NAND Flash - Reference design has Samsung 256MB but others possible device nand # NAND interface on CS3 # Coming soon, but not yet #options FDT #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=sam9260ek.dts options EARLY_PRINTF options SOCDEV_PA=0xfc000000 options SOCDEV_VA=0xdc000000 Index: head/sys/arm/conf/SAM9G20EK =================================================================== --- head/sys/arm/conf/SAM9G20EK (revision 282498) +++ head/sys/arm/conf/SAM9G20EK (revision 282499) @@ -1,156 +1,157 @@ # Kernel configuration for Atmel AT91SAM9G20EK Rev B. development card # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident SAM9G20EK +include "std.arm" include "../at91/std.sam9g20ek" #To statically compile in device wiring instead of /boot/device.hints hints "SAM9G20EK.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NANDFS # NAND file system options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server #options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 #options BOOTP_COMPAT options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options ALT_BREAK_TO_DEBUGGER #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging for use in -current #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device random device loop device bpf device ether device md device uart # Serial Ports # Ethernet device ate # Ethernet Driver device mii option AT91_ATE_USE_RMII device at91_twi # TWI: Two Wire Interface (EEPROM) device at91_wdt # WDT: Watchdog timer # NAND Flash - Reference design has Samsung 256MB but others possible device nand # NAND interface on CS3 # NOTE: SPI DataFlash and mci/mmc/mmcsd have hardware # confilict on this card. Use one or the other. # see board_sam9g20ek.c # SPI: Data Flash #device at91_spi # SPI: #device spibus #device at45d # at45db642 and maybe others # MMC/SD device at91_mci device mmc device mmcsd option AT91_MCI_SLOT_B option AT91_MCI_HAS_4WIRE # iic device iic device iicbus device icee # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support device ohci # OHCI localbus->USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ulpt # Printer #device udbp # USB Double Bulk Pipe devices # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm Index: head/sys/arm/conf/SAM9X25EK =================================================================== --- head/sys/arm/conf/SAM9X25EK (revision 282498) +++ head/sys/arm/conf/SAM9X25EK (revision 282499) @@ -1,156 +1,157 @@ # Kernel configuration for Atmel AT91SAM9G20EK Rev B. development card # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident SAM9X25EK +include "std.arm" include "../at91/std.sam9x25ek" #To statically compile in device wiring instead of /boot/device.hints hints "SAM9G20EK.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server #options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 #options BOOTP_COMPAT options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options ALT_BREAK_TO_DEBUGGER #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging for use in -current #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device random device pty device loop device bpf device ether device md device uart # Serial Ports # Ethernet device ate # Ethernet Driver device mii option AT91_ATE_USE_RMII #device at91_twi # TWI: Two Wire Interface (EEPROM) device at91_wdt # WDT: Watchdog timer # NOTE: SPI DataFlash and mci/mmc/mmcsd have hardware # confilict on this card. Use one or the other. # see board_sam9g20ek.c # SPI: Data Flash #device at91_spi # SPI: #device spibus #device at45d # at45db642 and maybe others # MMC/SD device at91_mci device mmc device mmcsd #option AT91_MCI_SLOT_B option AT91_MCI_HAS_4WIRE # iic device iic device iicbus device icee # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support #device ohci # OHCI localbus->USB interface #device usb # USB Bus (required) #device umass # Disks/Mass storage - Requires scbus and da #device uhid # "Human Interface Devices" #device ulpt # Printer #device udbp # USB Double Bulk Pipe devices # USB Ethernet, requires miibus device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm Index: head/sys/arm/conf/SHEEVAPLUG =================================================================== --- head/sys/arm/conf/SHEEVAPLUG (revision 282498) +++ head/sys/arm/conf/SHEEVAPLUG (revision 282499) @@ -1,85 +1,86 @@ # # Custom kernel for Marvell SheevaPlug devices. # # $FreeBSD$ # #NO_UNIVERSE ident SHEEVAPLUG +include "std.arm" include "../mv/kirkwood/std.db88f6xxx" options SOC_MV_KIRKWOOD #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem options NANDFS # NAND Filesystem options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=mge0 # Root fs on USB device #options ROOTDEVNAME=\"ufs:/dev/da0a\" options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging options ALT_BREAK_TO_DEBUGGER options DDB options KDB # Pseudo devices device random device loop # Serial ports device uart # Networking device ether device mge # Marvell Gigabit Ethernet controller device mii device e1000phy device bpf options HZ=1000 options DEVICE_POLLING device vlan device cesa # Marvell security engine device crypto device cryptodev # USB options USB_DEBUG # enable debug msgs device usb device ehci device umass device scbus device pass device da # NAND device nand # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=sheevaplug.dts Index: head/sys/arm/conf/SN9G45 =================================================================== --- head/sys/arm/conf/SN9G45 (revision 282498) +++ head/sys/arm/conf/SN9G45 (revision 282499) @@ -1,133 +1,134 @@ # Kernel configuration for DesignA Electronics Snapper9G45 System on Module # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident SN9G45 +include "std.arm" include "../at91/std.sn9g45" #To statically compile in device wiring instead of /boot/device.hints #hints "SN9G45.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NFSCL # Network Filesystem Client #options NFSD # Network Filesystem Server #options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 #options BOOTP_COMPAT options ROOTDEVNAME=\"ufs:/dev/da0s1\" options ALT_BREAK_TO_DEBUGGER options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=1000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging for use in -current #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device random device loop device bpf device ether device md device uart # Serial Ports # Ethernet device ate # Ethernet Driver device mii option AT91_ATE_USE_RMII device at91_wdt # WDT: Watchdog timer # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support device ohci # OHCI localbus->USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ulpt # Printer #device udbp # USB Double Bulk Pipe devices # USB Ethernet, requires miibus device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm Index: head/sys/arm/conf/SOCKIT.common =================================================================== --- head/sys/arm/conf/SOCKIT.common (revision 282498) +++ head/sys/arm/conf/SOCKIT.common (revision 282499) @@ -1,136 +1,137 @@ # # Kernel configuration for Terasic SoCKit (Altera Cyclone V SoC). # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ +include "std.armv6" include "../altera/socfpga/std.socfpga" makeoptions MODULES_OVERRIDE="" makeoptions WERROR="-Werror" options HZ=100 options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device dwmmc # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device dwcotg device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # Serial ports device uart device uart_ns8250 # I2C (TWSI) device iic device iicbus # SPI device spibus # Ethernet device ether device mii device smsc device smscphy device dwc device micphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: head/sys/arm/conf/TS7800 =================================================================== --- head/sys/arm/conf/TS7800 (revision 282498) +++ head/sys/arm/conf/TS7800 (revision 282499) @@ -1,81 +1,82 @@ # # Custom kernel for the TS-7800 board. # # $FreeBSD$ # ident TS7800 +include "std.arm" include "../mv/orion/std.ts7800" options SOC_MV_ORION #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=mge0 options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging options ALT_BREAK_TO_DEBUGGER options DDB options KDB options GDB # Support remote GDB. device mvs device pci # Pseudo devices device md device loop device random # Serial ports device uart # Networking device ether device mge # Marvell Gigabit Ethernet controller device mii device e1000phy device bpf options HZ=1000 # USB device usb device ehci device umass device scbus device pass device da # SATA device ata # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=ts7800.dts Index: head/sys/arm/conf/VERSATILEPB =================================================================== --- head/sys/arm/conf/VERSATILEPB (revision 282498) +++ head/sys/arm/conf/VERSATILEPB (revision 282499) @@ -1,118 +1,119 @@ # # VERSATILEPB - Configuration for QEMU version of Versatile Platform Board # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident VERSATILEPB machine arm armv6 cpu CPU_ARM1176 +include "std.armv6" files "../versatile/files.versatile" makeoptions MODULES_OVERRIDE="" options KERNVIRTADDR=0xc0100000 makeoptions KERNVIRTADDR=0xc0100000 options KERNPHYSADDR=0x00100000 makeoptions KERNPHYSADDR=0x00100000 options PHYSADDR=0x00000000 options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options LINUX_BOOT_ABI # Process metadata passed from Linux boot loaders options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options ROOTDEVNAME=\"ufs:da0s1a\" device bpf device loop device mii device mii_bitbang device smc device smcphy device ether device uart device pl011 device pl190 device pty device snp device pci # SCSI Controllers device sym # NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) # NOTE: serial console is disabled if syscons enabled # Comment following lines for headless setup device sc device kbdmux options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 device md device random # Entropy device # Flattened Device Tree options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=versatilepb.dts Index: head/sys/arm/conf/VIRT =================================================================== --- head/sys/arm/conf/VIRT (revision 282498) +++ head/sys/arm/conf/VIRT (revision 282499) @@ -1,97 +1,97 @@ # # VIRT -- Custom configuration for the qemu virt platform # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident VIRT +include "std.arm" include "../qemu/std.virt" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_LABEL # Provides labelization options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PLATFORM options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support -options ARM_NEW_PMAP # Enable the new v6 pmap # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER options ALT_BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device bpf device loop device ether device uart device pty device snp device pl011 device psci device virtio device virtio_mmio device virtio_blk device vtnet device md device random # Entropy device # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: head/sys/arm/conf/VYBRID =================================================================== --- head/sys/arm/conf/VYBRID (revision 282498) +++ head/sys/arm/conf/VYBRID (revision 282499) @@ -1,156 +1,157 @@ # # Kernel configuration for Vybrid Family boards. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident VYBRID +include "std.armv6" include "../freescale/vybrid/std.vybrid" makeoptions WERROR="-Werror" options HZ=100 options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options NANDFS # NAND Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support #options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 #options ROOTDEVNAME=\"nfs:10.5.0.1:/tftpboot/cosmic\" #options ROOTDEVNAME=\"nandfs:/dev/gnand0s.root\" options ROOTDEVNAME=\"ufs:/dev/da0\" options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device ehci #device ohci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs device nand # Serial ports device uart # I2C (TWSI) device iic device iicbus # Ethernet device ether device ffec # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter device sound # SPI device spibus device vf_spi # Framebuffer device vt device kbdmux device ukbd # Flattened Device Tree options FDT # Configure using FDT/DTB data Index: head/sys/arm/conf/ZEDBOARD =================================================================== --- head/sys/arm/conf/ZEDBOARD (revision 282498) +++ head/sys/arm/conf/ZEDBOARD (revision 282499) @@ -1,115 +1,115 @@ # # ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based # ZedBoard (www.zedboard.org) # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident ZEDBOARD +include "std.armv6" include "../xilinx/zedboard/std.zedboard" options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options QUOTA # Enable disk quotas for UFS options NFSCL # Network Filesystem Client #options NFSSD # Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) options VFP # Enable floating point hardware support options SMP # Enable multiple cores -options ARM_NEW_PMAP # Enable the new v6 pmap # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options BREAK_TO_DEBUGGER options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS root from boopt/dhcp #options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP_NFSV3 options ROOTDEVNAME=\"ufs:mmcsd0s2a\" device loop device random device ether device cgem # Zynq-7000 gig ethernet device device mii device e1000phy device pty device uart device gpio device md device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci device bpf # Berkeley packet filter # USB support device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device axe # USB-Ethernet # Flattened Device Tree options FDT # Configure using FDT/DTB data #options FDT_DTB_STATIC #makeoptions FDT_DTS_FILE=zedboard.dts Index: head/sys/arm/conf/std.arm =================================================================== --- head/sys/arm/conf/std.arm (nonexistent) +++ head/sys/arm/conf/std.arm (revision 282499) @@ -0,0 +1,5 @@ +# Standard kernel config items for all ARMv4/v5 systems. +# +# $FreeBSD$ + + Property changes on: head/sys/arm/conf/std.arm ___________________________________________________________________ Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Index: head/sys/arm/conf/std.armv6 =================================================================== --- head/sys/arm/conf/std.armv6 (nonexistent) +++ head/sys/arm/conf/std.armv6 (revision 282499) @@ -0,0 +1,6 @@ +# Standard kernel config items for all ARMv6/v7 systems. +# +# $FreeBSD$ + +options ARM_NEW_PMAP # Use new pmap code. + Property changes on: head/sys/arm/conf/std.armv6 ___________________________________________________________________ Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property