Index: head/sys/dev/wpi/if_wpi.c =================================================================== --- head/sys/dev/wpi/if_wpi.c (revision 282375) +++ head/sys/dev/wpi/if_wpi.c (revision 282376) @@ -1,5446 +1,5453 @@ /*- * Copyright (c) 2006,2007 * Damien Bergamini * Benjamin Close * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include __FBSDID("$FreeBSD$"); /* * Driver for Intel PRO/Wireless 3945ABG 802.11 network adapters. * * The 3945ABG network adapter doesn't use traditional hardware as * many other adaptors do. Instead at run time the eeprom is set into a known * state and told to load boot firmware. The boot firmware loads an init and a * main binary firmware image into SRAM on the card via DMA. * Once the firmware is loaded, the driver/hw then * communicate by way of circular dma rings via the SRAM to the firmware. * * There is 6 memory rings. 1 command ring, 1 rx data ring & 4 tx data rings. * The 4 tx data rings allow for prioritization QoS. * * The rx data ring consists of 32 dma buffers. Two registers are used to * indicate where in the ring the driver and the firmware are up to. The * driver sets the initial read index (reg1) and the initial write index (reg2), * the firmware updates the read index (reg1) on rx of a packet and fires an * interrupt. The driver then processes the buffers starting at reg1 indicating * to the firmware which buffers have been accessed by updating reg2. At the * same time allocating new memory for the processed buffer. * * A similar thing happens with the tx rings. The difference is the firmware * stop processing buffers once the queue is full and until confirmation * of a successful transmition (tx_done) has occurred. * * The command ring operates in the same manner as the tx queues. * * All communication direct to the card (ie eeprom) is classed as Stage1 * communication * * All communication via the firmware to the card is classed as State2. * The firmware consists of 2 parts. A bootstrap firmware and a runtime * firmware. The bootstrap firmware and runtime firmware are loaded * from host memory via dma to the card then told to execute. From this point * on the majority of communications between the driver and the card goes * via the firmware. */ #include "opt_wlan.h" #include "opt_wpi.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct wpi_ident { uint16_t vendor; uint16_t device; uint16_t subdevice; const char *name; }; static const struct wpi_ident wpi_ident_table[] = { /* The below entries support ABG regardless of the subid */ { 0x8086, 0x4222, 0x0, "Intel(R) PRO/Wireless 3945ABG" }, { 0x8086, 0x4227, 0x0, "Intel(R) PRO/Wireless 3945ABG" }, /* The below entries only support BG */ { 0x8086, 0x4222, 0x1005, "Intel(R) PRO/Wireless 3945BG" }, { 0x8086, 0x4222, 0x1034, "Intel(R) PRO/Wireless 3945BG" }, { 0x8086, 0x4227, 0x1014, "Intel(R) PRO/Wireless 3945BG" }, { 0x8086, 0x4222, 0x1044, "Intel(R) PRO/Wireless 3945BG" }, { 0, 0, 0, NULL } }; static int wpi_probe(device_t); static int wpi_attach(device_t); static void wpi_radiotap_attach(struct wpi_softc *); static void wpi_sysctlattach(struct wpi_softc *); static void wpi_init_beacon(struct wpi_vap *); static struct ieee80211vap *wpi_vap_create(struct ieee80211com *, const char [IFNAMSIZ], int, enum ieee80211_opmode, int, const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN]); static void wpi_vap_delete(struct ieee80211vap *); static int wpi_detach(device_t); static int wpi_shutdown(device_t); static int wpi_suspend(device_t); static int wpi_resume(device_t); static int wpi_nic_lock(struct wpi_softc *); static int wpi_read_prom_data(struct wpi_softc *, uint32_t, void *, int); static void wpi_dma_map_addr(void *, bus_dma_segment_t *, int, int); static int wpi_dma_contig_alloc(struct wpi_softc *, struct wpi_dma_info *, void **, bus_size_t, bus_size_t); static void wpi_dma_contig_free(struct wpi_dma_info *); static int wpi_alloc_shared(struct wpi_softc *); static void wpi_free_shared(struct wpi_softc *); static int wpi_alloc_fwmem(struct wpi_softc *); static void wpi_free_fwmem(struct wpi_softc *); static int wpi_alloc_rx_ring(struct wpi_softc *); static void wpi_update_rx_ring(struct wpi_softc *); static void wpi_reset_rx_ring(struct wpi_softc *); static void wpi_free_rx_ring(struct wpi_softc *); static int wpi_alloc_tx_ring(struct wpi_softc *, struct wpi_tx_ring *, int); static void wpi_update_tx_ring(struct wpi_softc *, struct wpi_tx_ring *); static void wpi_reset_tx_ring(struct wpi_softc *, struct wpi_tx_ring *); static void wpi_free_tx_ring(struct wpi_softc *, struct wpi_tx_ring *); static int wpi_read_eeprom(struct wpi_softc *, uint8_t macaddr[IEEE80211_ADDR_LEN]); static uint32_t wpi_eeprom_channel_flags(struct wpi_eeprom_chan *); static void wpi_read_eeprom_band(struct wpi_softc *, int); static int wpi_read_eeprom_channels(struct wpi_softc *, int); static struct wpi_eeprom_chan *wpi_find_eeprom_channel(struct wpi_softc *, struct ieee80211_channel *); static int wpi_setregdomain(struct ieee80211com *, struct ieee80211_regdomain *, int, struct ieee80211_channel[]); static int wpi_read_eeprom_group(struct wpi_softc *, int); static int wpi_add_node_entry_adhoc(struct wpi_softc *); static void wpi_node_free(struct ieee80211_node *); static struct ieee80211_node *wpi_node_alloc(struct ieee80211vap *, const uint8_t mac[IEEE80211_ADDR_LEN]); static int wpi_newstate(struct ieee80211vap *, enum ieee80211_state, int); static void wpi_calib_timeout(void *); static void wpi_rx_done(struct wpi_softc *, struct wpi_rx_desc *, struct wpi_rx_data *); static void wpi_rx_statistics(struct wpi_softc *, struct wpi_rx_desc *, struct wpi_rx_data *); static void wpi_tx_done(struct wpi_softc *, struct wpi_rx_desc *); static void wpi_cmd_done(struct wpi_softc *, struct wpi_rx_desc *); static void wpi_notif_intr(struct wpi_softc *); static void wpi_wakeup_intr(struct wpi_softc *); #ifdef WPI_DEBUG static void wpi_debug_registers(struct wpi_softc *); #endif static void wpi_fatal_intr(struct wpi_softc *); static void wpi_intr(void *); static int wpi_cmd2(struct wpi_softc *, struct wpi_buf *); static int wpi_tx_data(struct wpi_softc *, struct mbuf *, struct ieee80211_node *); static int wpi_tx_data_raw(struct wpi_softc *, struct mbuf *, struct ieee80211_node *, const struct ieee80211_bpf_params *); static int wpi_raw_xmit(struct ieee80211_node *, struct mbuf *, const struct ieee80211_bpf_params *); static void wpi_start(struct ifnet *); static void wpi_start_task(void *, int); static void wpi_watchdog_rfkill(void *); static void wpi_scan_timeout(void *); static void wpi_tx_timeout(void *); static int wpi_ioctl(struct ifnet *, u_long, caddr_t); static int wpi_cmd(struct wpi_softc *, int, const void *, size_t, int); static int wpi_mrr_setup(struct wpi_softc *); static int wpi_add_node(struct wpi_softc *, struct ieee80211_node *); static int wpi_add_broadcast_node(struct wpi_softc *, int); static int wpi_add_ibss_node(struct wpi_softc *, struct ieee80211_node *); static void wpi_del_node(struct wpi_softc *, struct ieee80211_node *); static int wpi_updateedca(struct ieee80211com *); static void wpi_set_promisc(struct wpi_softc *); static void wpi_update_promisc(struct ifnet *); static void wpi_update_mcast(struct ifnet *); static void wpi_set_led(struct wpi_softc *, uint8_t, uint8_t, uint8_t); static int wpi_set_timing(struct wpi_softc *, struct ieee80211_node *); static void wpi_power_calibration(struct wpi_softc *); static int wpi_set_txpower(struct wpi_softc *, int); static int wpi_get_power_index(struct wpi_softc *, struct wpi_power_group *, uint8_t, int, int); static int wpi_set_pslevel(struct wpi_softc *, uint8_t, int, int); static int wpi_send_btcoex(struct wpi_softc *); static int wpi_send_rxon(struct wpi_softc *, int, int); static int wpi_config(struct wpi_softc *); static uint16_t wpi_get_active_dwell_time(struct wpi_softc *, struct ieee80211_channel *, uint8_t); static uint16_t wpi_limit_dwell(struct wpi_softc *, uint16_t); static uint16_t wpi_get_passive_dwell_time(struct wpi_softc *, struct ieee80211_channel *); static int wpi_scan(struct wpi_softc *, struct ieee80211_channel *); static int wpi_auth(struct wpi_softc *, struct ieee80211vap *); static int wpi_config_beacon(struct wpi_vap *); static int wpi_setup_beacon(struct wpi_softc *, struct ieee80211_node *); static void wpi_update_beacon(struct ieee80211vap *, int); static void wpi_newassoc(struct ieee80211_node *, int); static int wpi_run(struct wpi_softc *, struct ieee80211vap *); static int wpi_load_key(struct ieee80211_node *, const struct ieee80211_key *); static void wpi_load_key_cb(void *, struct ieee80211_node *); static int wpi_set_global_keys(struct ieee80211_node *); static int wpi_del_key(struct ieee80211_node *, const struct ieee80211_key *); static void wpi_del_key_cb(void *, struct ieee80211_node *); static int wpi_process_key(struct ieee80211vap *, const struct ieee80211_key *, int); static int wpi_key_set(struct ieee80211vap *, const struct ieee80211_key *, const uint8_t mac[IEEE80211_ADDR_LEN]); static int wpi_key_delete(struct ieee80211vap *, const struct ieee80211_key *); static int wpi_post_alive(struct wpi_softc *); static int wpi_load_bootcode(struct wpi_softc *, const uint8_t *, int); static int wpi_load_firmware(struct wpi_softc *); static int wpi_read_firmware(struct wpi_softc *); static void wpi_unload_firmware(struct wpi_softc *); static int wpi_clock_wait(struct wpi_softc *); static int wpi_apm_init(struct wpi_softc *); static void wpi_apm_stop_master(struct wpi_softc *); static void wpi_apm_stop(struct wpi_softc *); static void wpi_nic_config(struct wpi_softc *); static int wpi_hw_init(struct wpi_softc *); static void wpi_hw_stop(struct wpi_softc *); static void wpi_radio_on(void *, int); static void wpi_radio_off(void *, int); static void wpi_init(void *); static void wpi_stop_locked(struct wpi_softc *); static void wpi_stop(struct wpi_softc *); static void wpi_scan_start(struct ieee80211com *); static void wpi_scan_end(struct ieee80211com *); static void wpi_set_channel(struct ieee80211com *); static void wpi_scan_curchan(struct ieee80211_scan_state *, unsigned long); static void wpi_scan_mindwell(struct ieee80211_scan_state *); static void wpi_hw_reset(void *, int); static device_method_t wpi_methods[] = { /* Device interface */ DEVMETHOD(device_probe, wpi_probe), DEVMETHOD(device_attach, wpi_attach), DEVMETHOD(device_detach, wpi_detach), DEVMETHOD(device_shutdown, wpi_shutdown), DEVMETHOD(device_suspend, wpi_suspend), DEVMETHOD(device_resume, wpi_resume), DEVMETHOD_END }; static driver_t wpi_driver = { "wpi", wpi_methods, sizeof (struct wpi_softc) }; static devclass_t wpi_devclass; DRIVER_MODULE(wpi, pci, wpi_driver, wpi_devclass, NULL, NULL); MODULE_VERSION(wpi, 1); MODULE_DEPEND(wpi, pci, 1, 1, 1); MODULE_DEPEND(wpi, wlan, 1, 1, 1); MODULE_DEPEND(wpi, firmware, 1, 1, 1); static int wpi_probe(device_t dev) { const struct wpi_ident *ident; for (ident = wpi_ident_table; ident->name != NULL; ident++) { if (pci_get_vendor(dev) == ident->vendor && pci_get_device(dev) == ident->device) { device_set_desc(dev, ident->name); return (BUS_PROBE_DEFAULT); } } return ENXIO; } static int wpi_attach(device_t dev) { struct wpi_softc *sc = (struct wpi_softc *)device_get_softc(dev); struct ieee80211com *ic; struct ifnet *ifp; int i, error, rid; #ifdef WPI_DEBUG int supportsa = 1; const struct wpi_ident *ident; #endif uint8_t macaddr[IEEE80211_ADDR_LEN]; sc->sc_dev = dev; #ifdef WPI_DEBUG error = resource_int_value(device_get_name(sc->sc_dev), device_get_unit(sc->sc_dev), "debug", &(sc->sc_debug)); if (error != 0) sc->sc_debug = 0; #else sc->sc_debug = 0; #endif DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); /* * Get the offset of the PCI Express Capability Structure in PCI * Configuration Space. */ error = pci_find_cap(dev, PCIY_EXPRESS, &sc->sc_cap_off); if (error != 0) { device_printf(dev, "PCIe capability structure not found!\n"); return error; } /* * Some card's only support 802.11b/g not a, check to see if * this is one such card. A 0x0 in the subdevice table indicates * the entire subdevice range is to be ignored. */ #ifdef WPI_DEBUG for (ident = wpi_ident_table; ident->name != NULL; ident++) { if (ident->subdevice && pci_get_subdevice(dev) == ident->subdevice) { supportsa = 0; break; } } #endif /* Clear device-specific "PCI retry timeout" register (41h). */ pci_write_config(dev, 0x41, 0, 1); /* Enable bus-mastering. */ pci_enable_busmaster(dev); rid = PCIR_BAR(0); sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (sc->mem == NULL) { device_printf(dev, "can't map mem space\n"); return ENOMEM; } sc->sc_st = rman_get_bustag(sc->mem); sc->sc_sh = rman_get_bushandle(sc->mem); i = 1; rid = 0; if (pci_alloc_msi(dev, &i) == 0) rid = 1; /* Install interrupt handler. */ sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE | (rid != 0 ? 0 : RF_SHAREABLE)); if (sc->irq == NULL) { device_printf(dev, "can't map interrupt\n"); error = ENOMEM; goto fail; } WPI_LOCK_INIT(sc); WPI_TX_LOCK_INIT(sc); WPI_RXON_LOCK_INIT(sc); WPI_NT_LOCK_INIT(sc); WPI_TXQ_LOCK_INIT(sc); WPI_TXQ_STATE_LOCK_INIT(sc); /* Allocate DMA memory for firmware transfers. */ if ((error = wpi_alloc_fwmem(sc)) != 0) { device_printf(dev, "could not allocate memory for firmware, error %d\n", error); goto fail; } /* Allocate shared page. */ if ((error = wpi_alloc_shared(sc)) != 0) { device_printf(dev, "could not allocate shared page\n"); goto fail; } /* Allocate TX rings - 4 for QoS purposes, 1 for commands. */ for (i = 0; i < WPI_NTXQUEUES; i++) { if ((error = wpi_alloc_tx_ring(sc, &sc->txq[i], i)) != 0) { device_printf(dev, "could not allocate TX ring %d, error %d\n", i, error); goto fail; } } /* Allocate RX ring. */ if ((error = wpi_alloc_rx_ring(sc)) != 0) { device_printf(dev, "could not allocate RX ring, error %d\n", error); goto fail; } /* Clear pending interrupts. */ WPI_WRITE(sc, WPI_INT, 0xffffffff); ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211); if (ifp == NULL) { device_printf(dev, "can not allocate ifnet structure\n"); goto fail; } ic = ifp->if_l2com; ic->ic_ifp = ifp; ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ /* Set device capabilities. */ ic->ic_caps = IEEE80211_C_STA /* station mode supported */ | IEEE80211_C_IBSS /* IBSS mode supported */ | IEEE80211_C_HOSTAP /* Host access point mode */ | IEEE80211_C_MONITOR /* monitor mode supported */ | IEEE80211_C_AHDEMO /* adhoc demo mode */ | IEEE80211_C_BGSCAN /* capable of bg scanning */ | IEEE80211_C_TXPMGT /* tx power management */ | IEEE80211_C_SHSLOT /* short slot time supported */ | IEEE80211_C_WPA /* 802.11i */ | IEEE80211_C_SHPREAMBLE /* short preamble supported */ | IEEE80211_C_WME /* 802.11e */ | IEEE80211_C_PMGT /* Station-side power mgmt */ ; ic->ic_cryptocaps = IEEE80211_CRYPTO_AES_CCM; /* * Read in the eeprom and also setup the channels for * net80211. We don't set the rates as net80211 does this for us */ if ((error = wpi_read_eeprom(sc, macaddr)) != 0) { device_printf(dev, "could not read EEPROM, error %d\n", error); goto fail; } #ifdef WPI_DEBUG if (bootverbose) { device_printf(sc->sc_dev, "Regulatory Domain: %.4s\n", sc->domain); device_printf(sc->sc_dev, "Hardware Type: %c\n", sc->type > 1 ? 'B': '?'); device_printf(sc->sc_dev, "Hardware Revision: %c\n", ((sc->rev & 0xf0) == 0xd0) ? 'D': '?'); device_printf(sc->sc_dev, "SKU %s support 802.11a\n", supportsa ? "does" : "does not"); /* XXX hw_config uses the PCIDEV for the Hardware rev. Must check what sc->rev really represents - benjsc 20070615 */ } #endif if_initname(ifp, device_get_name(dev), device_get_unit(dev)); ifp->if_softc = sc; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_init = wpi_init; ifp->if_ioctl = wpi_ioctl; ifp->if_start = wpi_start; IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen); ifp->if_snd.ifq_drv_maxlen = ifqmaxlen; IFQ_SET_READY(&ifp->if_snd); ieee80211_ifattach(ic, macaddr); ic->ic_vap_create = wpi_vap_create; ic->ic_vap_delete = wpi_vap_delete; ic->ic_raw_xmit = wpi_raw_xmit; ic->ic_node_alloc = wpi_node_alloc; sc->sc_node_free = ic->ic_node_free; ic->ic_node_free = wpi_node_free; ic->ic_wme.wme_update = wpi_updateedca; ic->ic_update_promisc = wpi_update_promisc; ic->ic_update_mcast = wpi_update_mcast; ic->ic_newassoc = wpi_newassoc; ic->ic_scan_start = wpi_scan_start; ic->ic_scan_end = wpi_scan_end; ic->ic_set_channel = wpi_set_channel; - sc->sc_scan_curchan = ic->ic_scan_curchan; ic->ic_scan_curchan = wpi_scan_curchan; ic->ic_scan_mindwell = wpi_scan_mindwell; ic->ic_setregdomain = wpi_setregdomain; wpi_radiotap_attach(sc); callout_init_mtx(&sc->calib_to, &sc->rxon_mtx, 0); callout_init_mtx(&sc->scan_timeout, &sc->rxon_mtx, 0); callout_init_mtx(&sc->tx_timeout, &sc->txq_state_mtx, 0); callout_init_mtx(&sc->watchdog_rfkill, &sc->sc_mtx, 0); TASK_INIT(&sc->sc_reinittask, 0, wpi_hw_reset, sc); TASK_INIT(&sc->sc_radiooff_task, 0, wpi_radio_off, sc); TASK_INIT(&sc->sc_radioon_task, 0, wpi_radio_on, sc); TASK_INIT(&sc->sc_start_task, 0, wpi_start_task, sc); sc->sc_tq = taskqueue_create("wpi_taskq", M_WAITOK, taskqueue_thread_enqueue, &sc->sc_tq); error = taskqueue_start_threads(&sc->sc_tq, 1, 0, "wpi_taskq"); if (error != 0) { device_printf(dev, "can't start threads, error %d\n", error); goto fail; } wpi_sysctlattach(sc); /* * Hook our interrupt after all initialization is complete. */ error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET | INTR_MPSAFE, NULL, wpi_intr, sc, &sc->sc_ih); if (error != 0) { device_printf(dev, "can't establish interrupt, error %d\n", error); goto fail; } if (bootverbose) ieee80211_announce(ic); #ifdef WPI_DEBUG if (sc->sc_debug & WPI_DEBUG_HW) ieee80211_announce_channels(ic); #endif DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return 0; fail: wpi_detach(dev); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); return error; } /* * Attach the interface to 802.11 radiotap. */ static void wpi_radiotap_attach(struct wpi_softc *sc) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); ieee80211_radiotap_attach(ic, &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), WPI_TX_RADIOTAP_PRESENT, &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), WPI_RX_RADIOTAP_PRESENT); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); } static void wpi_sysctlattach(struct wpi_softc *sc) { #ifdef WPI_DEBUG struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, "debug", CTLFLAG_RW, &sc->sc_debug, sc->sc_debug, "control debugging printfs"); #endif } static void wpi_init_beacon(struct wpi_vap *wvp) { struct wpi_buf *bcn = &wvp->wv_bcbuf; struct wpi_cmd_beacon *cmd = (struct wpi_cmd_beacon *)&bcn->data; cmd->id = WPI_ID_BROADCAST; cmd->ofdm_mask = 0xff; cmd->cck_mask = 0x0f; cmd->lifetime = htole32(WPI_LIFETIME_INFINITE); cmd->flags = htole32(WPI_TX_AUTO_SEQ | WPI_TX_INSERT_TSTAMP); bcn->code = WPI_CMD_SET_BEACON; bcn->ac = WPI_CMD_QUEUE_NUM; bcn->size = sizeof(struct wpi_cmd_beacon); } static struct ieee80211vap * wpi_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, enum ieee80211_opmode opmode, int flags, const uint8_t bssid[IEEE80211_ADDR_LEN], const uint8_t mac[IEEE80211_ADDR_LEN]) { struct wpi_vap *wvp; struct ieee80211vap *vap; if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */ return NULL; wvp = (struct wpi_vap *) malloc(sizeof(struct wpi_vap), M_80211_VAP, M_NOWAIT | M_ZERO); if (wvp == NULL) return NULL; vap = &wvp->wv_vap; ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid, mac); if (opmode == IEEE80211_M_IBSS || opmode == IEEE80211_M_HOSTAP) { WPI_VAP_LOCK_INIT(wvp); wpi_init_beacon(wvp); } /* Override with driver methods. */ vap->iv_key_set = wpi_key_set; vap->iv_key_delete = wpi_key_delete; wvp->wv_newstate = vap->iv_newstate; vap->iv_newstate = wpi_newstate; vap->iv_update_beacon = wpi_update_beacon; vap->iv_max_aid = WPI_ID_IBSS_MAX - WPI_ID_IBSS_MIN + 1; ieee80211_ratectl_init(vap); /* Complete setup. */ ieee80211_vap_attach(vap, ieee80211_media_change, ieee80211_media_status); ic->ic_opmode = opmode; return vap; } static void wpi_vap_delete(struct ieee80211vap *vap) { struct wpi_vap *wvp = WPI_VAP(vap); struct wpi_buf *bcn = &wvp->wv_bcbuf; enum ieee80211_opmode opmode = vap->iv_opmode; ieee80211_ratectl_deinit(vap); ieee80211_vap_detach(vap); if (opmode == IEEE80211_M_IBSS || opmode == IEEE80211_M_HOSTAP) { if (bcn->m != NULL) m_freem(bcn->m); WPI_VAP_LOCK_DESTROY(wvp); } free(wvp, M_80211_VAP); } static int wpi_detach(device_t dev) { struct wpi_softc *sc = device_get_softc(dev); struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic; int qid; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); if (ifp != NULL) { ic = ifp->if_l2com; ieee80211_draintask(ic, &sc->sc_reinittask); ieee80211_draintask(ic, &sc->sc_radiooff_task); ieee80211_draintask(ic, &sc->sc_radioon_task); ieee80211_draintask(ic, &sc->sc_start_task); wpi_stop(sc); taskqueue_drain_all(sc->sc_tq); taskqueue_free(sc->sc_tq); callout_drain(&sc->watchdog_rfkill); callout_drain(&sc->tx_timeout); callout_drain(&sc->scan_timeout); callout_drain(&sc->calib_to); ieee80211_ifdetach(ic); } /* Uninstall interrupt handler. */ if (sc->irq != NULL) { bus_teardown_intr(dev, sc->irq, sc->sc_ih); bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(sc->irq), sc->irq); pci_release_msi(dev); } if (sc->txq[0].data_dmat) { /* Free DMA resources. */ for (qid = 0; qid < WPI_NTXQUEUES; qid++) wpi_free_tx_ring(sc, &sc->txq[qid]); wpi_free_rx_ring(sc); wpi_free_shared(sc); } if (sc->fw_dma.tag) wpi_free_fwmem(sc); if (sc->mem != NULL) bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(sc->mem), sc->mem); if (ifp != NULL) if_free(ifp); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); WPI_TXQ_STATE_LOCK_DESTROY(sc); WPI_TXQ_LOCK_DESTROY(sc); WPI_NT_LOCK_DESTROY(sc); WPI_RXON_LOCK_DESTROY(sc); WPI_TX_LOCK_DESTROY(sc); WPI_LOCK_DESTROY(sc); return 0; } static int wpi_shutdown(device_t dev) { struct wpi_softc *sc = device_get_softc(dev); wpi_stop(sc); return 0; } static int wpi_suspend(device_t dev) { struct wpi_softc *sc = device_get_softc(dev); struct ieee80211com *ic = sc->sc_ifp->if_l2com; ieee80211_suspend_all(ic); return 0; } static int wpi_resume(device_t dev) { struct wpi_softc *sc = device_get_softc(dev); struct ieee80211com *ic = sc->sc_ifp->if_l2com; /* Clear device-specific "PCI retry timeout" register (41h). */ pci_write_config(dev, 0x41, 0, 1); ieee80211_resume_all(ic); return 0; } /* * Grab exclusive access to NIC memory. */ static int wpi_nic_lock(struct wpi_softc *sc) { int ntries; /* Request exclusive access to NIC. */ WPI_SETBITS(sc, WPI_GP_CNTRL, WPI_GP_CNTRL_MAC_ACCESS_REQ); /* Spin until we actually get the lock. */ for (ntries = 0; ntries < 1000; ntries++) { if ((WPI_READ(sc, WPI_GP_CNTRL) & (WPI_GP_CNTRL_MAC_ACCESS_ENA | WPI_GP_CNTRL_SLEEP)) == WPI_GP_CNTRL_MAC_ACCESS_ENA) return 0; DELAY(10); } device_printf(sc->sc_dev, "could not lock memory\n"); return ETIMEDOUT; } /* * Release lock on NIC memory. */ static __inline void wpi_nic_unlock(struct wpi_softc *sc) { WPI_CLRBITS(sc, WPI_GP_CNTRL, WPI_GP_CNTRL_MAC_ACCESS_REQ); } static __inline uint32_t wpi_prph_read(struct wpi_softc *sc, uint32_t addr) { WPI_WRITE(sc, WPI_PRPH_RADDR, WPI_PRPH_DWORD | addr); WPI_BARRIER_READ_WRITE(sc); return WPI_READ(sc, WPI_PRPH_RDATA); } static __inline void wpi_prph_write(struct wpi_softc *sc, uint32_t addr, uint32_t data) { WPI_WRITE(sc, WPI_PRPH_WADDR, WPI_PRPH_DWORD | addr); WPI_BARRIER_WRITE(sc); WPI_WRITE(sc, WPI_PRPH_WDATA, data); } static __inline void wpi_prph_setbits(struct wpi_softc *sc, uint32_t addr, uint32_t mask) { wpi_prph_write(sc, addr, wpi_prph_read(sc, addr) | mask); } static __inline void wpi_prph_clrbits(struct wpi_softc *sc, uint32_t addr, uint32_t mask) { wpi_prph_write(sc, addr, wpi_prph_read(sc, addr) & ~mask); } static __inline void wpi_prph_write_region_4(struct wpi_softc *sc, uint32_t addr, const uint32_t *data, int count) { for (; count > 0; count--, data++, addr += 4) wpi_prph_write(sc, addr, *data); } static __inline uint32_t wpi_mem_read(struct wpi_softc *sc, uint32_t addr) { WPI_WRITE(sc, WPI_MEM_RADDR, addr); WPI_BARRIER_READ_WRITE(sc); return WPI_READ(sc, WPI_MEM_RDATA); } static __inline void wpi_mem_read_region_4(struct wpi_softc *sc, uint32_t addr, uint32_t *data, int count) { for (; count > 0; count--, addr += 4) *data++ = wpi_mem_read(sc, addr); } static int wpi_read_prom_data(struct wpi_softc *sc, uint32_t addr, void *data, int count) { uint8_t *out = data; uint32_t val; int error, ntries; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); if ((error = wpi_nic_lock(sc)) != 0) return error; for (; count > 0; count -= 2, addr++) { WPI_WRITE(sc, WPI_EEPROM, addr << 2); for (ntries = 0; ntries < 10; ntries++) { val = WPI_READ(sc, WPI_EEPROM); if (val & WPI_EEPROM_READ_VALID) break; DELAY(5); } if (ntries == 10) { device_printf(sc->sc_dev, "timeout reading ROM at 0x%x\n", addr); return ETIMEDOUT; } *out++= val >> 16; if (count > 1) *out ++= val >> 24; } wpi_nic_unlock(sc); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return 0; } static void wpi_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nsegs, int error) { if (error != 0) return; KASSERT(nsegs == 1, ("too many DMA segments, %d should be 1", nsegs)); *(bus_addr_t *)arg = segs[0].ds_addr; } /* * Allocates a contiguous block of dma memory of the requested size and * alignment. */ static int wpi_dma_contig_alloc(struct wpi_softc *sc, struct wpi_dma_info *dma, void **kvap, bus_size_t size, bus_size_t alignment) { int error; dma->tag = NULL; dma->size = size; error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), alignment, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, size, 1, size, BUS_DMA_NOWAIT, NULL, NULL, &dma->tag); if (error != 0) goto fail; error = bus_dmamem_alloc(dma->tag, (void **)&dma->vaddr, BUS_DMA_NOWAIT | BUS_DMA_ZERO | BUS_DMA_COHERENT, &dma->map); if (error != 0) goto fail; error = bus_dmamap_load(dma->tag, dma->map, dma->vaddr, size, wpi_dma_map_addr, &dma->paddr, BUS_DMA_NOWAIT); if (error != 0) goto fail; bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); if (kvap != NULL) *kvap = dma->vaddr; return 0; fail: wpi_dma_contig_free(dma); return error; } static void wpi_dma_contig_free(struct wpi_dma_info *dma) { if (dma->vaddr != NULL) { bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(dma->tag, dma->map); bus_dmamem_free(dma->tag, dma->vaddr, dma->map); dma->vaddr = NULL; } if (dma->tag != NULL) { bus_dma_tag_destroy(dma->tag); dma->tag = NULL; } } /* * Allocate a shared page between host and NIC. */ static int wpi_alloc_shared(struct wpi_softc *sc) { /* Shared buffer must be aligned on a 4KB boundary. */ return wpi_dma_contig_alloc(sc, &sc->shared_dma, (void **)&sc->shared, sizeof (struct wpi_shared), 4096); } static void wpi_free_shared(struct wpi_softc *sc) { wpi_dma_contig_free(&sc->shared_dma); } /* * Allocate DMA-safe memory for firmware transfer. */ static int wpi_alloc_fwmem(struct wpi_softc *sc) { /* Must be aligned on a 16-byte boundary. */ return wpi_dma_contig_alloc(sc, &sc->fw_dma, NULL, WPI_FW_TEXT_MAXSZ + WPI_FW_DATA_MAXSZ, 16); } static void wpi_free_fwmem(struct wpi_softc *sc) { wpi_dma_contig_free(&sc->fw_dma); } static int wpi_alloc_rx_ring(struct wpi_softc *sc) { struct wpi_rx_ring *ring = &sc->rxq; bus_size_t size; int i, error; ring->cur = 0; ring->update = 0; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); /* Allocate RX descriptors (16KB aligned.) */ size = WPI_RX_RING_COUNT * sizeof (uint32_t); error = wpi_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc, size, WPI_RING_DMA_ALIGN); if (error != 0) { device_printf(sc->sc_dev, "%s: could not allocate RX ring DMA memory, error %d\n", __func__, error); goto fail; } /* Create RX buffer DMA tag. */ error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MJUMPAGESIZE, 1, MJUMPAGESIZE, BUS_DMA_NOWAIT, NULL, NULL, &ring->data_dmat); if (error != 0) { device_printf(sc->sc_dev, "%s: could not create RX buf DMA tag, error %d\n", __func__, error); goto fail; } /* * Allocate and map RX buffers. */ for (i = 0; i < WPI_RX_RING_COUNT; i++) { struct wpi_rx_data *data = &ring->data[i]; bus_addr_t paddr; error = bus_dmamap_create(ring->data_dmat, 0, &data->map); if (error != 0) { device_printf(sc->sc_dev, "%s: could not create RX buf DMA map, error %d\n", __func__, error); goto fail; } data->m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUMPAGESIZE); if (data->m == NULL) { device_printf(sc->sc_dev, "%s: could not allocate RX mbuf\n", __func__); error = ENOBUFS; goto fail; } error = bus_dmamap_load(ring->data_dmat, data->map, mtod(data->m, void *), MJUMPAGESIZE, wpi_dma_map_addr, &paddr, BUS_DMA_NOWAIT); if (error != 0 && error != EFBIG) { device_printf(sc->sc_dev, "%s: can't map mbuf (error %d)\n", __func__, error); goto fail; } /* Set physical address of RX buffer. */ ring->desc[i] = htole32(paddr); } bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, BUS_DMASYNC_PREWRITE); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return 0; fail: wpi_free_rx_ring(sc); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); return error; } static void wpi_update_rx_ring(struct wpi_softc *sc) { struct wpi_rx_ring *ring = &sc->rxq; if (ring->update != 0) { /* Wait for INT_WAKEUP event. */ return; } if (WPI_READ(sc, WPI_UCODE_GP1) & WPI_UCODE_GP1_MAC_SLEEP) { DPRINTF(sc, WPI_DEBUG_PWRSAVE, "%s: wakeup request\n", __func__); WPI_SETBITS(sc, WPI_GP_CNTRL, WPI_GP_CNTRL_MAC_ACCESS_REQ); ring->update = 1; } else WPI_WRITE(sc, WPI_FH_RX_WPTR, ring->cur & ~7); } static void wpi_reset_rx_ring(struct wpi_softc *sc) { struct wpi_rx_ring *ring = &sc->rxq; int ntries; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); if (wpi_nic_lock(sc) == 0) { WPI_WRITE(sc, WPI_FH_RX_CONFIG, 0); for (ntries = 0; ntries < 1000; ntries++) { if (WPI_READ(sc, WPI_FH_RX_STATUS) & WPI_FH_RX_STATUS_IDLE) break; DELAY(10); } wpi_nic_unlock(sc); } ring->cur = 0; ring->update = 0; } static void wpi_free_rx_ring(struct wpi_softc *sc) { struct wpi_rx_ring *ring = &sc->rxq; int i; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); wpi_dma_contig_free(&ring->desc_dma); for (i = 0; i < WPI_RX_RING_COUNT; i++) { struct wpi_rx_data *data = &ring->data[i]; if (data->m != NULL) { bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(ring->data_dmat, data->map); m_freem(data->m); data->m = NULL; } if (data->map != NULL) bus_dmamap_destroy(ring->data_dmat, data->map); } if (ring->data_dmat != NULL) { bus_dma_tag_destroy(ring->data_dmat); ring->data_dmat = NULL; } } static int wpi_alloc_tx_ring(struct wpi_softc *sc, struct wpi_tx_ring *ring, int qid) { bus_addr_t paddr; bus_size_t size; int i, error; ring->qid = qid; ring->queued = 0; ring->cur = 0; ring->update = 0; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); /* Allocate TX descriptors (16KB aligned.) */ size = WPI_TX_RING_COUNT * sizeof (struct wpi_tx_desc); error = wpi_dma_contig_alloc(sc, &ring->desc_dma, (void **)&ring->desc, size, WPI_RING_DMA_ALIGN); if (error != 0) { device_printf(sc->sc_dev, "%s: could not allocate TX ring DMA memory, error %d\n", __func__, error); goto fail; } /* Update shared area with ring physical address. */ sc->shared->txbase[qid] = htole32(ring->desc_dma.paddr); bus_dmamap_sync(sc->shared_dma.tag, sc->shared_dma.map, BUS_DMASYNC_PREWRITE); /* * We only use rings 0 through 4 (4 EDCA + cmd) so there is no need * to allocate commands space for other rings. * XXX Do we really need to allocate descriptors for other rings? */ if (qid > WPI_CMD_QUEUE_NUM) { DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return 0; } size = WPI_TX_RING_COUNT * sizeof (struct wpi_tx_cmd); error = wpi_dma_contig_alloc(sc, &ring->cmd_dma, (void **)&ring->cmd, size, 4); if (error != 0) { device_printf(sc->sc_dev, "%s: could not allocate TX cmd DMA memory, error %d\n", __func__, error); goto fail; } error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, WPI_MAX_SCATTER - 1, MCLBYTES, BUS_DMA_NOWAIT, NULL, NULL, &ring->data_dmat); if (error != 0) { device_printf(sc->sc_dev, "%s: could not create TX buf DMA tag, error %d\n", __func__, error); goto fail; } paddr = ring->cmd_dma.paddr; for (i = 0; i < WPI_TX_RING_COUNT; i++) { struct wpi_tx_data *data = &ring->data[i]; data->cmd_paddr = paddr; paddr += sizeof (struct wpi_tx_cmd); error = bus_dmamap_create(ring->data_dmat, 0, &data->map); if (error != 0) { device_printf(sc->sc_dev, "%s: could not create TX buf DMA map, error %d\n", __func__, error); goto fail; } } DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return 0; fail: wpi_free_tx_ring(sc, ring); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); return error; } static void wpi_update_tx_ring(struct wpi_softc *sc, struct wpi_tx_ring *ring) { if (ring->update != 0) { /* Wait for INT_WAKEUP event. */ return; } if (WPI_READ(sc, WPI_UCODE_GP1) & WPI_UCODE_GP1_MAC_SLEEP) { DPRINTF(sc, WPI_DEBUG_PWRSAVE, "%s (%d): requesting wakeup\n", __func__, ring->qid); WPI_SETBITS(sc, WPI_GP_CNTRL, WPI_GP_CNTRL_MAC_ACCESS_REQ); ring->update = 1; } else WPI_WRITE(sc, WPI_HBUS_TARG_WRPTR, ring->qid << 8 | ring->cur); } static void wpi_reset_tx_ring(struct wpi_softc *sc, struct wpi_tx_ring *ring) { int i; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); for (i = 0; i < WPI_TX_RING_COUNT; i++) { struct wpi_tx_data *data = &ring->data[i]; if (data->m != NULL) { bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->data_dmat, data->map); m_freem(data->m); data->m = NULL; } } /* Clear TX descriptors. */ memset(ring->desc, 0, ring->desc_dma.size); bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, BUS_DMASYNC_PREWRITE); sc->qfullmsk &= ~(1 << ring->qid); ring->queued = 0; ring->cur = 0; ring->update = 0; } static void wpi_free_tx_ring(struct wpi_softc *sc, struct wpi_tx_ring *ring) { int i; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); wpi_dma_contig_free(&ring->desc_dma); wpi_dma_contig_free(&ring->cmd_dma); for (i = 0; i < WPI_TX_RING_COUNT; i++) { struct wpi_tx_data *data = &ring->data[i]; if (data->m != NULL) { bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->data_dmat, data->map); m_freem(data->m); } if (data->map != NULL) bus_dmamap_destroy(ring->data_dmat, data->map); } if (ring->data_dmat != NULL) { bus_dma_tag_destroy(ring->data_dmat); ring->data_dmat = NULL; } } /* * Extract various information from EEPROM. */ static int wpi_read_eeprom(struct wpi_softc *sc, uint8_t macaddr[IEEE80211_ADDR_LEN]) { #define WPI_CHK(res) do { \ if ((error = res) != 0) \ goto fail; \ } while (0) int error, i; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); /* Adapter has to be powered on for EEPROM access to work. */ if ((error = wpi_apm_init(sc)) != 0) { device_printf(sc->sc_dev, "%s: could not power ON adapter, error %d\n", __func__, error); return error; } if ((WPI_READ(sc, WPI_EEPROM_GP) & 0x6) == 0) { device_printf(sc->sc_dev, "bad EEPROM signature\n"); error = EIO; goto fail; } /* Clear HW ownership of EEPROM. */ WPI_CLRBITS(sc, WPI_EEPROM_GP, WPI_EEPROM_GP_IF_OWNER); /* Read the hardware capabilities, revision and SKU type. */ WPI_CHK(wpi_read_prom_data(sc, WPI_EEPROM_SKU_CAP, &sc->cap, sizeof(sc->cap))); WPI_CHK(wpi_read_prom_data(sc, WPI_EEPROM_REVISION, &sc->rev, sizeof(sc->rev))); WPI_CHK(wpi_read_prom_data(sc, WPI_EEPROM_TYPE, &sc->type, sizeof(sc->type))); sc->rev = le16toh(sc->rev); DPRINTF(sc, WPI_DEBUG_EEPROM, "cap=%x rev=%x type=%x\n", sc->cap, sc->rev, sc->type); /* Read the regulatory domain (4 ASCII characters.) */ WPI_CHK(wpi_read_prom_data(sc, WPI_EEPROM_DOMAIN, sc->domain, sizeof(sc->domain))); /* Read MAC address. */ WPI_CHK(wpi_read_prom_data(sc, WPI_EEPROM_MAC, macaddr, IEEE80211_ADDR_LEN)); /* Read the list of authorized channels. */ for (i = 0; i < WPI_CHAN_BANDS_COUNT; i++) WPI_CHK(wpi_read_eeprom_channels(sc, i)); /* Read the list of TX power groups. */ for (i = 0; i < WPI_POWER_GROUPS_COUNT; i++) WPI_CHK(wpi_read_eeprom_group(sc, i)); fail: wpi_apm_stop(sc); /* Power OFF adapter. */ DPRINTF(sc, WPI_DEBUG_TRACE, error ? TRACE_STR_END_ERR : TRACE_STR_END, __func__); return error; #undef WPI_CHK } /* * Translate EEPROM flags to net80211. */ static uint32_t wpi_eeprom_channel_flags(struct wpi_eeprom_chan *channel) { uint32_t nflags; nflags = 0; if ((channel->flags & WPI_EEPROM_CHAN_ACTIVE) == 0) nflags |= IEEE80211_CHAN_PASSIVE; if ((channel->flags & WPI_EEPROM_CHAN_IBSS) == 0) nflags |= IEEE80211_CHAN_NOADHOC; if (channel->flags & WPI_EEPROM_CHAN_RADAR) { nflags |= IEEE80211_CHAN_DFS; /* XXX apparently IBSS may still be marked */ nflags |= IEEE80211_CHAN_NOADHOC; } /* XXX HOSTAP uses WPI_MODE_IBSS */ if (nflags & IEEE80211_CHAN_NOADHOC) nflags |= IEEE80211_CHAN_NOHOSTAP; return nflags; } static void wpi_read_eeprom_band(struct wpi_softc *sc, int n) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct wpi_eeprom_chan *channels = sc->eeprom_channels[n]; const struct wpi_chan_band *band = &wpi_bands[n]; struct ieee80211_channel *c; uint8_t chan; int i, nflags; for (i = 0; i < band->nchan; i++) { if (!(channels[i].flags & WPI_EEPROM_CHAN_VALID)) { DPRINTF(sc, WPI_DEBUG_EEPROM, "Channel Not Valid: %d, band %d\n", band->chan[i],n); continue; } chan = band->chan[i]; nflags = wpi_eeprom_channel_flags(&channels[i]); c = &ic->ic_channels[ic->ic_nchans++]; c->ic_ieee = chan; c->ic_maxregpower = channels[i].maxpwr; c->ic_maxpower = 2*c->ic_maxregpower; if (n == 0) { /* 2GHz band */ c->ic_freq = ieee80211_ieee2mhz(chan, IEEE80211_CHAN_G); /* G =>'s B is supported */ c->ic_flags = IEEE80211_CHAN_B | nflags; c = &ic->ic_channels[ic->ic_nchans++]; c[0] = c[-1]; c->ic_flags = IEEE80211_CHAN_G | nflags; } else { /* 5GHz band */ c->ic_freq = ieee80211_ieee2mhz(chan, IEEE80211_CHAN_A); c->ic_flags = IEEE80211_CHAN_A | nflags; } /* Save maximum allowed TX power for this channel. */ sc->maxpwr[chan] = channels[i].maxpwr; DPRINTF(sc, WPI_DEBUG_EEPROM, "adding chan %d (%dMHz) flags=0x%x maxpwr=%d passive=%d," " offset %d\n", chan, c->ic_freq, channels[i].flags, sc->maxpwr[chan], IEEE80211_IS_CHAN_PASSIVE(c), ic->ic_nchans); } } /** * Read the eeprom to find out what channels are valid for the given * band and update net80211 with what we find. */ static int wpi_read_eeprom_channels(struct wpi_softc *sc, int n) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; const struct wpi_chan_band *band = &wpi_bands[n]; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); error = wpi_read_prom_data(sc, band->addr, &sc->eeprom_channels[n], band->nchan * sizeof (struct wpi_eeprom_chan)); if (error != 0) { DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); return error; } wpi_read_eeprom_band(sc, n); ieee80211_sort_channels(ic->ic_channels, ic->ic_nchans); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return 0; } static struct wpi_eeprom_chan * wpi_find_eeprom_channel(struct wpi_softc *sc, struct ieee80211_channel *c) { int i, j; for (j = 0; j < WPI_CHAN_BANDS_COUNT; j++) for (i = 0; i < wpi_bands[j].nchan; i++) if (wpi_bands[j].chan[i] == c->ic_ieee) return &sc->eeprom_channels[j][i]; return NULL; } /* * Enforce flags read from EEPROM. */ static int wpi_setregdomain(struct ieee80211com *ic, struct ieee80211_regdomain *rd, int nchan, struct ieee80211_channel chans[]) { struct ifnet *ifp = ic->ic_ifp; struct wpi_softc *sc = ifp->if_softc; int i; for (i = 0; i < nchan; i++) { struct ieee80211_channel *c = &chans[i]; struct wpi_eeprom_chan *channel; channel = wpi_find_eeprom_channel(sc, c); if (channel == NULL) { if_printf(ic->ic_ifp, "%s: invalid channel %u freq %u/0x%x\n", __func__, c->ic_ieee, c->ic_freq, c->ic_flags); return EINVAL; } c->ic_flags |= wpi_eeprom_channel_flags(channel); } return 0; } static int wpi_read_eeprom_group(struct wpi_softc *sc, int n) { struct wpi_power_group *group = &sc->groups[n]; struct wpi_eeprom_group rgroup; int i, error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); if ((error = wpi_read_prom_data(sc, WPI_EEPROM_POWER_GRP + n * 32, &rgroup, sizeof rgroup)) != 0) { DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); return error; } /* Save TX power group information. */ group->chan = rgroup.chan; group->maxpwr = rgroup.maxpwr; /* Retrieve temperature at which the samples were taken. */ group->temp = (int16_t)le16toh(rgroup.temp); DPRINTF(sc, WPI_DEBUG_EEPROM, "power group %d: chan=%d maxpwr=%d temp=%d\n", n, group->chan, group->maxpwr, group->temp); for (i = 0; i < WPI_SAMPLES_COUNT; i++) { group->samples[i].index = rgroup.samples[i].index; group->samples[i].power = rgroup.samples[i].power; DPRINTF(sc, WPI_DEBUG_EEPROM, "\tsample %d: index=%d power=%d\n", i, group->samples[i].index, group->samples[i].power); } DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return 0; } static int wpi_add_node_entry_adhoc(struct wpi_softc *sc) { int newid = WPI_ID_IBSS_MIN; for (; newid <= WPI_ID_IBSS_MAX; newid++) { if ((sc->nodesmsk & (1 << newid)) == 0) { sc->nodesmsk |= 1 << newid; return newid; } } return WPI_ID_UNDEFINED; } static __inline int wpi_add_node_entry_sta(struct wpi_softc *sc) { sc->nodesmsk |= 1 << WPI_ID_BSS; return WPI_ID_BSS; } static __inline int wpi_check_node_entry(struct wpi_softc *sc, uint8_t id) { if (id == WPI_ID_UNDEFINED) return 0; return (sc->nodesmsk >> id) & 1; } static __inline void wpi_clear_node_table(struct wpi_softc *sc) { sc->nodesmsk = 0; } static __inline void wpi_del_node_entry(struct wpi_softc *sc, uint8_t id) { sc->nodesmsk &= ~(1 << id); } static struct ieee80211_node * wpi_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN]) { struct wpi_node *wn; wn = malloc(sizeof (struct wpi_node), M_80211_NODE, M_NOWAIT | M_ZERO); if (wn == NULL) return NULL; wn->id = WPI_ID_UNDEFINED; return &wn->ni; } static void wpi_node_free(struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct wpi_softc *sc = ic->ic_ifp->if_softc; struct wpi_node *wn = WPI_NODE(ni); if (wn->id != WPI_ID_UNDEFINED) { WPI_NT_LOCK(sc); if (wpi_check_node_entry(sc, wn->id)) { wpi_del_node_entry(sc, wn->id); wpi_del_node(sc, ni); } WPI_NT_UNLOCK(sc); } sc->sc_node_free(ni); } static __inline int wpi_check_bss_filter(struct wpi_softc *sc) { return (sc->rxon.filter & htole32(WPI_FILTER_BSS)) != 0; } /** * Called by net80211 when ever there is a change to 80211 state machine */ static int wpi_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct wpi_vap *wvp = WPI_VAP(vap); struct ieee80211com *ic = vap->iv_ic; struct ifnet *ifp = ic->ic_ifp; struct wpi_softc *sc = ifp->if_softc; int error = 0; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); DPRINTF(sc, WPI_DEBUG_STATE, "%s: %s -> %s\n", __func__, ieee80211_state_name[vap->iv_state], ieee80211_state_name[nstate]); if (vap->iv_state == IEEE80211_S_RUN && nstate != IEEE80211_S_RUN) { if ((error = wpi_set_pslevel(sc, 0, 0, 1)) != 0) { device_printf(sc->sc_dev, "%s: could not set power saving level\n", __func__); return error; } } switch (nstate) { case IEEE80211_S_SCAN: WPI_RXON_LOCK(sc); if (wpi_check_bss_filter(sc) != 0 && vap->iv_opmode != IEEE80211_M_STA) { sc->rxon.filter &= ~htole32(WPI_FILTER_BSS); if ((error = wpi_send_rxon(sc, 0, 1)) != 0) { device_printf(sc->sc_dev, "%s: could not send RXON\n", __func__); } } WPI_RXON_UNLOCK(sc); break; case IEEE80211_S_ASSOC: if (vap->iv_state != IEEE80211_S_RUN) break; /* FALLTHROUGH */ case IEEE80211_S_AUTH: /* * The node must be registered in the firmware before auth. * Also the associd must be cleared on RUN -> ASSOC * transitions. */ if ((error = wpi_auth(sc, vap)) != 0) { device_printf(sc->sc_dev, "%s: could not move to AUTH state, error %d\n", __func__, error); } break; case IEEE80211_S_RUN: /* * RUN -> RUN transition; Just restart the timers. */ if (vap->iv_state == IEEE80211_S_RUN) { WPI_RXON_LOCK(sc); wpi_calib_timeout(sc); WPI_RXON_UNLOCK(sc); break; } /* * !RUN -> RUN requires setting the association id * which is done with a firmware cmd. We also defer * starting the timers until that work is done. */ if ((error = wpi_run(sc, vap)) != 0) { device_printf(sc->sc_dev, "%s: could not move to RUN state\n", __func__); } break; default: break; } if (error != 0) { DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); return error; } DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return wvp->wv_newstate(vap, nstate, arg); } static void wpi_calib_timeout(void *arg) { struct wpi_softc *sc = arg; if (wpi_check_bss_filter(sc) == 0) return; wpi_power_calibration(sc); callout_reset(&sc->calib_to, 60*hz, wpi_calib_timeout, sc); } static __inline uint8_t rate2plcp(const uint8_t rate) { switch (rate) { case 12: return 0xd; case 18: return 0xf; case 24: return 0x5; case 36: return 0x7; case 48: return 0x9; case 72: return 0xb; case 96: return 0x1; case 108: return 0x3; case 2: return 10; case 4: return 20; case 11: return 55; case 22: return 110; default: return 0; } } static __inline uint8_t plcp2rate(const uint8_t plcp) { switch (plcp) { case 0xd: return 12; case 0xf: return 18; case 0x5: return 24; case 0x7: return 36; case 0x9: return 48; case 0xb: return 72; case 0x1: return 96; case 0x3: return 108; case 10: return 2; case 20: return 4; case 55: return 11; case 110: return 22; default: return 0; } } /* Quickly determine if a given rate is CCK or OFDM. */ #define WPI_RATE_IS_OFDM(rate) ((rate) >= 12 && (rate) != 22) static void wpi_rx_done(struct wpi_softc *sc, struct wpi_rx_desc *desc, struct wpi_rx_data *data) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct wpi_rx_ring *ring = &sc->rxq; struct wpi_rx_stat *stat; struct wpi_rx_head *head; struct wpi_rx_tail *tail; struct ieee80211_frame *wh; struct ieee80211_node *ni; struct mbuf *m, *m1; bus_addr_t paddr; uint32_t flags; uint16_t len; int error; stat = (struct wpi_rx_stat *)(desc + 1); if (stat->len > WPI_STAT_MAXLEN) { device_printf(sc->sc_dev, "invalid RX statistic header\n"); goto fail1; } bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTREAD); head = (struct wpi_rx_head *)((caddr_t)(stat + 1) + stat->len); len = le16toh(head->len); tail = (struct wpi_rx_tail *)((caddr_t)(head + 1) + len); flags = le32toh(tail->flags); DPRINTF(sc, WPI_DEBUG_RECV, "%s: idx %d len %d stat len %u rssi %d" " rate %x chan %d tstamp %ju\n", __func__, ring->cur, le32toh(desc->len), len, (int8_t)stat->rssi, head->plcp, head->chan, (uintmax_t)le64toh(tail->tstamp)); /* Discard frames with a bad FCS early. */ if ((flags & WPI_RX_NOERROR) != WPI_RX_NOERROR) { DPRINTF(sc, WPI_DEBUG_RECV, "%s: RX flags error %x\n", __func__, flags); goto fail1; } /* Discard frames that are too short. */ if (len < sizeof (*wh)) { DPRINTF(sc, WPI_DEBUG_RECV, "%s: frame too short: %d\n", __func__, len); goto fail1; } m1 = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUMPAGESIZE); if (m1 == NULL) { DPRINTF(sc, WPI_DEBUG_ANY, "%s: no mbuf to restock ring\n", __func__); goto fail1; } bus_dmamap_unload(ring->data_dmat, data->map); error = bus_dmamap_load(ring->data_dmat, data->map, mtod(m1, void *), MJUMPAGESIZE, wpi_dma_map_addr, &paddr, BUS_DMA_NOWAIT); if (error != 0 && error != EFBIG) { device_printf(sc->sc_dev, "%s: bus_dmamap_load failed, error %d\n", __func__, error); m_freem(m1); /* Try to reload the old mbuf. */ error = bus_dmamap_load(ring->data_dmat, data->map, mtod(data->m, void *), MJUMPAGESIZE, wpi_dma_map_addr, &paddr, BUS_DMA_NOWAIT); if (error != 0 && error != EFBIG) { panic("%s: could not load old RX mbuf", __func__); } /* Physical address may have changed. */ ring->desc[ring->cur] = htole32(paddr); bus_dmamap_sync(ring->data_dmat, ring->desc_dma.map, BUS_DMASYNC_PREWRITE); goto fail1; } m = data->m; data->m = m1; /* Update RX descriptor. */ ring->desc[ring->cur] = htole32(paddr); bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, BUS_DMASYNC_PREWRITE); /* Finalize mbuf. */ m->m_pkthdr.rcvif = ifp; m->m_data = (caddr_t)(head + 1); m->m_pkthdr.len = m->m_len = len; /* Grab a reference to the source node. */ wh = mtod(m, struct ieee80211_frame *); if ((wh->i_fc[1] & IEEE80211_FC1_PROTECTED) && (flags & WPI_RX_CIPHER_MASK) == WPI_RX_CIPHER_CCMP) { /* Check whether decryption was successful or not. */ if ((flags & WPI_RX_DECRYPT_MASK) != WPI_RX_DECRYPT_OK) { DPRINTF(sc, WPI_DEBUG_RECV, "CCMP decryption failed 0x%x\n", flags); goto fail2; } m->m_flags |= M_WEP; } ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)wh); if (ieee80211_radiotap_active(ic)) { struct wpi_rx_radiotap_header *tap = &sc->sc_rxtap; tap->wr_flags = 0; if (head->flags & htole16(WPI_STAT_FLAG_SHPREAMBLE)) tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; tap->wr_dbm_antsignal = (int8_t)(stat->rssi + WPI_RSSI_OFFSET); tap->wr_dbm_antnoise = WPI_RSSI_OFFSET; tap->wr_tsft = tail->tstamp; tap->wr_antenna = (le16toh(head->flags) >> 4) & 0xf; tap->wr_rate = plcp2rate(head->plcp); } WPI_UNLOCK(sc); /* Send the frame to the 802.11 layer. */ if (ni != NULL) { (void)ieee80211_input(ni, m, stat->rssi, WPI_RSSI_OFFSET); /* Node is no longer needed. */ ieee80211_free_node(ni); } else (void)ieee80211_input_all(ic, m, stat->rssi, WPI_RSSI_OFFSET); WPI_LOCK(sc); return; fail2: m_freem(m); fail1: if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); } static void wpi_rx_statistics(struct wpi_softc *sc, struct wpi_rx_desc *desc, struct wpi_rx_data *data) { /* Ignore */ } static void wpi_tx_done(struct wpi_softc *sc, struct wpi_rx_desc *desc) { struct ifnet *ifp = sc->sc_ifp; struct wpi_tx_ring *ring = &sc->txq[desc->qid & 0x3]; struct wpi_tx_data *data = &ring->data[desc->idx]; struct wpi_tx_stat *stat = (struct wpi_tx_stat *)(desc + 1); struct mbuf *m; struct ieee80211_node *ni; struct ieee80211vap *vap; struct ieee80211com *ic; uint32_t status = le32toh(stat->status); int ackfailcnt = stat->ackfailcnt / WPI_NTRIES_DEFAULT; KASSERT(data->ni != NULL, ("no node")); KASSERT(data->m != NULL, ("no mbuf")); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); DPRINTF(sc, WPI_DEBUG_XMIT, "%s: " "qid %d idx %d retries %d btkillcnt %d rate %x duration %d " "status %x\n", __func__, desc->qid, desc->idx, stat->ackfailcnt, stat->btkillcnt, stat->rate, le32toh(stat->duration), status); /* Unmap and free mbuf. */ bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->data_dmat, data->map); m = data->m, data->m = NULL; ni = data->ni, data->ni = NULL; vap = ni->ni_vap; ic = vap->iv_ic; /* * Update rate control statistics for the node. */ if ((status & 0xff) != 1) { if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); ieee80211_ratectl_tx_complete(vap, ni, IEEE80211_RATECTL_TX_FAILURE, &ackfailcnt, NULL); } else { if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); ieee80211_ratectl_tx_complete(vap, ni, IEEE80211_RATECTL_TX_SUCCESS, &ackfailcnt, NULL); } ieee80211_tx_complete(ni, m, (status & 0xff) != 1); WPI_TXQ_STATE_LOCK(sc); ring->queued -= 1; if (ring->queued > 0) { callout_reset(&sc->tx_timeout, 5*hz, wpi_tx_timeout, sc); if (sc->qfullmsk != 0 && ring->queued < WPI_TX_RING_LOMARK) { sc->qfullmsk &= ~(1 << ring->qid); IF_LOCK(&ifp->if_snd); if (sc->qfullmsk == 0 && (ifp->if_drv_flags & IFF_DRV_OACTIVE)) { ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; IF_UNLOCK(&ifp->if_snd); ieee80211_runtask(ic, &sc->sc_start_task); } else IF_UNLOCK(&ifp->if_snd); } } else callout_stop(&sc->tx_timeout); WPI_TXQ_STATE_UNLOCK(sc); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); } /* * Process a "command done" firmware notification. This is where we wakeup * processes waiting for a synchronous command completion. */ static void wpi_cmd_done(struct wpi_softc *sc, struct wpi_rx_desc *desc) { struct wpi_tx_ring *ring = &sc->txq[WPI_CMD_QUEUE_NUM]; struct wpi_tx_data *data; DPRINTF(sc, WPI_DEBUG_CMD, "cmd notification qid %x idx %d flags %x " "type %s len %d\n", desc->qid, desc->idx, desc->flags, wpi_cmd_str(desc->type), le32toh(desc->len)); if ((desc->qid & WPI_RX_DESC_QID_MSK) != WPI_CMD_QUEUE_NUM) return; /* Not a command ack. */ KASSERT(ring->queued == 0, ("ring->queued must be 0")); data = &ring->data[desc->idx]; /* If the command was mapped in an mbuf, free it. */ if (data->m != NULL) { bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(ring->data_dmat, data->map); m_freem(data->m); data->m = NULL; } wakeup(&ring->cmd[desc->idx]); } static void wpi_notif_intr(struct wpi_softc *sc) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); uint32_t hw; bus_dmamap_sync(sc->shared_dma.tag, sc->shared_dma.map, BUS_DMASYNC_POSTREAD); hw = le32toh(sc->shared->next); hw = (hw == 0) ? WPI_RX_RING_COUNT - 1 : hw - 1; while (sc->rxq.cur != hw) { sc->rxq.cur = (sc->rxq.cur + 1) % WPI_RX_RING_COUNT; struct wpi_rx_data *data = &sc->rxq.data[sc->rxq.cur]; struct wpi_rx_desc *desc; bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); desc = mtod(data->m, struct wpi_rx_desc *); DPRINTF(sc, WPI_DEBUG_NOTIFY, "%s: cur=%d; qid %x idx %d flags %x type %d(%s) len %d\n", __func__, sc->rxq.cur, desc->qid, desc->idx, desc->flags, desc->type, wpi_cmd_str(desc->type), le32toh(desc->len)); if (!(desc->qid & WPI_UNSOLICITED_RX_NOTIF)) { /* Reply to a command. */ wpi_cmd_done(sc, desc); } switch (desc->type) { case WPI_RX_DONE: /* An 802.11 frame has been received. */ wpi_rx_done(sc, desc, data); if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { /* wpi_stop() was called. */ return; } break; case WPI_TX_DONE: /* An 802.11 frame has been transmitted. */ wpi_tx_done(sc, desc); break; case WPI_RX_STATISTICS: case WPI_BEACON_STATISTICS: wpi_rx_statistics(sc, desc, data); break; case WPI_BEACON_MISSED: { struct wpi_beacon_missed *miss = (struct wpi_beacon_missed *)(desc + 1); uint32_t misses; bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); misses = le32toh(miss->consecutive); DPRINTF(sc, WPI_DEBUG_STATE, "%s: beacons missed %d/%d\n", __func__, misses, le32toh(miss->total)); if (vap->iv_state == IEEE80211_S_RUN && (ic->ic_flags & IEEE80211_F_SCAN) == 0 && misses >= vap->iv_bmissthreshold) ieee80211_beacon_miss(ic); break; } case WPI_UC_READY: { struct wpi_ucode_info *uc = (struct wpi_ucode_info *)(desc + 1); /* The microcontroller is ready. */ bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); DPRINTF(sc, WPI_DEBUG_RESET, "microcode alive notification version=%d.%d " "subtype=%x alive=%x\n", uc->major, uc->minor, uc->subtype, le32toh(uc->valid)); if (le32toh(uc->valid) != 1) { device_printf(sc->sc_dev, "microcontroller initialization failed\n"); wpi_stop_locked(sc); } /* Save the address of the error log in SRAM. */ sc->errptr = le32toh(uc->errptr); break; } case WPI_STATE_CHANGED: { bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); uint32_t *status = (uint32_t *)(desc + 1); DPRINTF(sc, WPI_DEBUG_STATE, "state changed to %x\n", le32toh(*status)); if (le32toh(*status) & 1) { WPI_NT_LOCK(sc); wpi_clear_node_table(sc); WPI_NT_UNLOCK(sc); ieee80211_runtask(ic, &sc->sc_radiooff_task); return; } break; } case WPI_START_SCAN: { bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); #ifdef WPI_DEBUG struct wpi_start_scan *scan = (struct wpi_start_scan *)(desc + 1); DPRINTF(sc, WPI_DEBUG_SCAN, "%s: scanning channel %d status %x\n", __func__, scan->chan, le32toh(scan->status)); #endif break; } case WPI_STOP_SCAN: { bus_dmamap_sync(sc->rxq.data_dmat, data->map, BUS_DMASYNC_POSTREAD); #ifdef WPI_DEBUG struct wpi_stop_scan *scan = (struct wpi_stop_scan *)(desc + 1); DPRINTF(sc, WPI_DEBUG_SCAN, "scan finished nchan=%d status=%d chan=%d\n", scan->nchan, scan->status, scan->chan); #endif WPI_RXON_LOCK(sc); callout_stop(&sc->scan_timeout); WPI_RXON_UNLOCK(sc); ieee80211_scan_next(vap); break; } } if (sc->rxq.cur % 8 == 0) { /* Tell the firmware what we have processed. */ wpi_update_rx_ring(sc); } } } /* * Process an INT_WAKEUP interrupt raised when the microcontroller wakes up * from power-down sleep mode. */ static void wpi_wakeup_intr(struct wpi_softc *sc) { int qid; DPRINTF(sc, WPI_DEBUG_PWRSAVE, "%s: ucode wakeup from power-down sleep\n", __func__); /* Wakeup RX and TX rings. */ if (sc->rxq.update) { sc->rxq.update = 0; wpi_update_rx_ring(sc); } WPI_TXQ_LOCK(sc); for (qid = 0; qid < WPI_DRV_NTXQUEUES; qid++) { struct wpi_tx_ring *ring = &sc->txq[qid]; if (ring->update) { ring->update = 0; wpi_update_tx_ring(sc, ring); } } WPI_TXQ_UNLOCK(sc); WPI_CLRBITS(sc, WPI_GP_CNTRL, WPI_GP_CNTRL_MAC_ACCESS_REQ); } /* * This function prints firmware registers */ #ifdef WPI_DEBUG static void wpi_debug_registers(struct wpi_softc *sc) { #define COUNTOF(array) (sizeof(array) / sizeof(array[0])) int i; static const uint32_t csr_tbl[] = { WPI_HW_IF_CONFIG, WPI_INT, WPI_INT_MASK, WPI_FH_INT, WPI_GPIO_IN, WPI_RESET, WPI_GP_CNTRL, WPI_EEPROM, WPI_EEPROM_GP, WPI_GIO, WPI_UCODE_GP1, WPI_UCODE_GP2, WPI_GIO_CHICKEN, WPI_ANA_PLL, WPI_DBG_HPET_MEM, }; static const uint32_t prph_tbl[] = { WPI_APMG_CLK_CTRL, WPI_APMG_PS, WPI_APMG_PCI_STT, WPI_APMG_RFKILL, }; DPRINTF(sc, WPI_DEBUG_REGISTER,"%s","\n"); for (i = 0; i < COUNTOF(csr_tbl); i++) { DPRINTF(sc, WPI_DEBUG_REGISTER, " %-18s: 0x%08x ", wpi_get_csr_string(csr_tbl[i]), WPI_READ(sc, csr_tbl[i])); if ((i + 1) % 2 == 0) DPRINTF(sc, WPI_DEBUG_REGISTER, "\n"); } DPRINTF(sc, WPI_DEBUG_REGISTER, "\n\n"); if (wpi_nic_lock(sc) == 0) { for (i = 0; i < COUNTOF(prph_tbl); i++) { DPRINTF(sc, WPI_DEBUG_REGISTER, " %-18s: 0x%08x ", wpi_get_prph_string(prph_tbl[i]), wpi_prph_read(sc, prph_tbl[i])); if ((i + 1) % 2 == 0) DPRINTF(sc, WPI_DEBUG_REGISTER, "\n"); } DPRINTF(sc, WPI_DEBUG_REGISTER, "\n"); wpi_nic_unlock(sc); } else { DPRINTF(sc, WPI_DEBUG_REGISTER, "Cannot access internal registers.\n"); } #undef COUNTOF } #endif /* * Dump the error log of the firmware when a firmware panic occurs. Although * we can't debug the firmware because it is neither open source nor free, it * can help us to identify certain classes of problems. */ static void wpi_fatal_intr(struct wpi_softc *sc) { struct wpi_fw_dump dump; uint32_t i, offset, count; const uint32_t size_errmsg = (sizeof (wpi_fw_errmsg) / sizeof ((wpi_fw_errmsg)[0])); /* Check that the error log address is valid. */ if (sc->errptr < WPI_FW_DATA_BASE || sc->errptr + sizeof (dump) > WPI_FW_DATA_BASE + WPI_FW_DATA_MAXSZ) { printf("%s: bad firmware error log address 0x%08x\n", __func__, sc->errptr); return; } if (wpi_nic_lock(sc) != 0) { printf("%s: could not read firmware error log\n", __func__); return; } /* Read number of entries in the log. */ count = wpi_mem_read(sc, sc->errptr); if (count == 0 || count * sizeof (dump) > WPI_FW_DATA_MAXSZ) { printf("%s: invalid count field (count = %u)\n", __func__, count); wpi_nic_unlock(sc); return; } /* Skip "count" field. */ offset = sc->errptr + sizeof (uint32_t); printf("firmware error log (count = %u):\n", count); for (i = 0; i < count; i++) { wpi_mem_read_region_4(sc, offset, (uint32_t *)&dump, sizeof (dump) / sizeof (uint32_t)); printf(" error type = \"%s\" (0x%08X)\n", (dump.desc < size_errmsg) ? wpi_fw_errmsg[dump.desc] : "UNKNOWN", dump.desc); printf(" error data = 0x%08X\n", dump.data); printf(" branch link = 0x%08X%08X\n", dump.blink[0], dump.blink[1]); printf(" interrupt link = 0x%08X%08X\n", dump.ilink[0], dump.ilink[1]); printf(" time = %u\n", dump.time); offset += sizeof (dump); } wpi_nic_unlock(sc); /* Dump driver status (TX and RX rings) while we're here. */ printf("driver status:\n"); WPI_TXQ_LOCK(sc); for (i = 0; i < WPI_DRV_NTXQUEUES; i++) { struct wpi_tx_ring *ring = &sc->txq[i]; printf(" tx ring %2d: qid=%-2d cur=%-3d queued=%-3d\n", i, ring->qid, ring->cur, ring->queued); } WPI_TXQ_UNLOCK(sc); printf(" rx ring: cur=%d\n", sc->rxq.cur); } static void wpi_intr(void *arg) { struct wpi_softc *sc = arg; struct ifnet *ifp = sc->sc_ifp; uint32_t r1, r2; WPI_LOCK(sc); /* Disable interrupts. */ WPI_WRITE(sc, WPI_INT_MASK, 0); r1 = WPI_READ(sc, WPI_INT); if (r1 == 0xffffffff || (r1 & 0xfffffff0) == 0xa5a5a5a0) goto end; /* Hardware gone! */ r2 = WPI_READ(sc, WPI_FH_INT); DPRINTF(sc, WPI_DEBUG_INTR, "%s: reg1=0x%08x reg2=0x%08x\n", __func__, r1, r2); if (r1 == 0 && r2 == 0) goto done; /* Interrupt not for us. */ /* Acknowledge interrupts. */ WPI_WRITE(sc, WPI_INT, r1); WPI_WRITE(sc, WPI_FH_INT, r2); if (r1 & (WPI_INT_SW_ERR | WPI_INT_HW_ERR)) { device_printf(sc->sc_dev, "fatal firmware error\n"); #ifdef WPI_DEBUG wpi_debug_registers(sc); #endif wpi_fatal_intr(sc); DPRINTF(sc, WPI_DEBUG_HW, "(%s)\n", (r1 & WPI_INT_SW_ERR) ? "(Software Error)" : "(Hardware Error)"); taskqueue_enqueue(sc->sc_tq, &sc->sc_reinittask); goto end; } if ((r1 & (WPI_INT_FH_RX | WPI_INT_SW_RX)) || (r2 & WPI_FH_INT_RX)) wpi_notif_intr(sc); if (r1 & WPI_INT_ALIVE) wakeup(sc); /* Firmware is alive. */ if (r1 & WPI_INT_WAKEUP) wpi_wakeup_intr(sc); done: /* Re-enable interrupts. */ if (ifp->if_flags & IFF_UP) WPI_WRITE(sc, WPI_INT_MASK, WPI_INT_MASK_DEF); end: WPI_UNLOCK(sc); } static int wpi_cmd2(struct wpi_softc *sc, struct wpi_buf *buf) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211_frame *wh; struct wpi_tx_cmd *cmd; struct wpi_tx_data *data; struct wpi_tx_desc *desc; struct wpi_tx_ring *ring; struct mbuf *m1; bus_dma_segment_t *seg, segs[WPI_MAX_SCATTER]; int error, i, hdrlen, nsegs, totlen, pad; WPI_TXQ_LOCK(sc); KASSERT(buf->size <= sizeof(buf->data), ("buffer overflow")); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); if (sc->txq_active == 0) { /* wpi_stop() was called */ error = ENETDOWN; goto fail; } wh = mtod(buf->m, struct ieee80211_frame *); hdrlen = ieee80211_anyhdrsize(wh); totlen = buf->m->m_pkthdr.len; if (hdrlen & 3) { /* First segment length must be a multiple of 4. */ pad = 4 - (hdrlen & 3); } else pad = 0; ring = &sc->txq[buf->ac]; desc = &ring->desc[ring->cur]; data = &ring->data[ring->cur]; /* Prepare TX firmware command. */ cmd = &ring->cmd[ring->cur]; cmd->code = buf->code; cmd->flags = 0; cmd->qid = ring->qid; cmd->idx = ring->cur; memcpy(cmd->data, buf->data, buf->size); /* Save and trim IEEE802.11 header. */ memcpy((uint8_t *)(cmd->data + buf->size), wh, hdrlen); m_adj(buf->m, hdrlen); error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, buf->m, segs, &nsegs, BUS_DMA_NOWAIT); if (error != 0 && error != EFBIG) { device_printf(sc->sc_dev, "%s: can't map mbuf (error %d)\n", __func__, error); goto fail; } if (error != 0) { /* Too many DMA segments, linearize mbuf. */ m1 = m_collapse(buf->m, M_NOWAIT, WPI_MAX_SCATTER - 1); if (m1 == NULL) { device_printf(sc->sc_dev, "%s: could not defrag mbuf\n", __func__); error = ENOBUFS; goto fail; } buf->m = m1; error = bus_dmamap_load_mbuf_sg(ring->data_dmat, data->map, buf->m, segs, &nsegs, BUS_DMA_NOWAIT); if (error != 0) { device_printf(sc->sc_dev, "%s: can't map mbuf (error %d)\n", __func__, error); goto fail; } } KASSERT(nsegs < WPI_MAX_SCATTER, ("too many DMA segments, nsegs (%d) should be less than %d", nsegs, WPI_MAX_SCATTER)); data->m = buf->m; data->ni = buf->ni; DPRINTF(sc, WPI_DEBUG_XMIT, "%s: qid %d idx %d len %d nsegs %d\n", __func__, ring->qid, ring->cur, totlen, nsegs); /* Fill TX descriptor. */ desc->nsegs = WPI_PAD32(totlen + pad) << 4 | (1 + nsegs); /* First DMA segment is used by the TX command. */ desc->segs[0].addr = htole32(data->cmd_paddr); desc->segs[0].len = htole32(4 + buf->size + hdrlen + pad); /* Other DMA segments are for data payload. */ seg = &segs[0]; for (i = 1; i <= nsegs; i++) { desc->segs[i].addr = htole32(seg->ds_addr); desc->segs[i].len = htole32(seg->ds_len); seg++; } bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_PREWRITE); bus_dmamap_sync(ring->data_dmat, ring->cmd_dma.map, BUS_DMASYNC_PREWRITE); bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, BUS_DMASYNC_PREWRITE); /* Kick TX ring. */ ring->cur = (ring->cur + 1) % WPI_TX_RING_COUNT; wpi_update_tx_ring(sc, ring); if (ring->qid < WPI_CMD_QUEUE_NUM) { /* Mark TX ring as full if we reach a certain threshold. */ WPI_TXQ_STATE_LOCK(sc); if (++ring->queued > WPI_TX_RING_HIMARK) { sc->qfullmsk |= 1 << ring->qid; IF_LOCK(&ifp->if_snd); ifp->if_drv_flags |= IFF_DRV_OACTIVE; IF_UNLOCK(&ifp->if_snd); } callout_reset(&sc->tx_timeout, 5*hz, wpi_tx_timeout, sc); WPI_TXQ_STATE_UNLOCK(sc); } DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); WPI_TXQ_UNLOCK(sc); return 0; fail: m_freem(buf->m); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); WPI_TXQ_UNLOCK(sc); return error; } /* * Construct the data packet for a transmit buffer. */ static int wpi_tx_data(struct wpi_softc *sc, struct mbuf *m, struct ieee80211_node *ni) { const struct ieee80211_txparam *tp; struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct wpi_node *wn = WPI_NODE(ni); struct ieee80211_channel *chan; struct ieee80211_frame *wh; struct ieee80211_key *k = NULL; struct wpi_buf tx_data; struct wpi_cmd_data *tx = (struct wpi_cmd_data *)&tx_data.data; uint32_t flags; uint16_t qos; uint8_t tid, type; int ac, error, swcrypt, rate, ismcast, totlen; wh = mtod(m, struct ieee80211_frame *); type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; ismcast = IEEE80211_IS_MULTICAST(wh->i_addr1); /* Select EDCA Access Category and TX ring for this frame. */ if (IEEE80211_QOS_HAS_SEQ(wh)) { qos = ((const struct ieee80211_qosframe *)wh)->i_qos[0]; tid = qos & IEEE80211_QOS_TID; } else { qos = 0; tid = 0; } ac = M_WME_GETAC(m); chan = (ni->ni_chan != IEEE80211_CHAN_ANYC) ? ni->ni_chan : ic->ic_curchan; tp = &vap->iv_txparms[ieee80211_chan2mode(chan)]; /* Choose a TX rate index. */ if (type == IEEE80211_FC0_TYPE_MGT) rate = tp->mgmtrate; else if (ismcast) rate = tp->mcastrate; else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) rate = tp->ucastrate; else if (m->m_flags & M_EAPOL) rate = tp->mgmtrate; else { /* XXX pass pktlen */ (void) ieee80211_ratectl_rate(ni, NULL, 0); rate = ni->ni_txrate; } /* Encrypt the frame if need be. */ if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { /* Retrieve key for TX. */ k = ieee80211_crypto_encap(ni, m); if (k == NULL) { error = ENOBUFS; goto fail; } swcrypt = k->wk_flags & IEEE80211_KEY_SWCRYPT; /* 802.11 header may have moved. */ wh = mtod(m, struct ieee80211_frame *); } totlen = m->m_pkthdr.len; if (ieee80211_radiotap_active_vap(vap)) { struct wpi_tx_radiotap_header *tap = &sc->sc_txtap; tap->wt_flags = 0; tap->wt_rate = rate; if (k != NULL) tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP; ieee80211_radiotap_tx(vap, m); } flags = 0; if (!ismcast) { /* Unicast frame, check if an ACK is expected. */ if (!qos || (qos & IEEE80211_QOS_ACKPOLICY) != IEEE80211_QOS_ACKPOLICY_NOACK) flags |= WPI_TX_NEED_ACK; } if (wh->i_fc[1] & IEEE80211_FC1_MORE_FRAG) flags |= WPI_TX_MORE_FRAG; /* Cannot happen yet. */ /* Check if frame must be protected using RTS/CTS or CTS-to-self. */ if (!ismcast) { /* NB: Group frames are sent using CCK in 802.11b/g. */ if (totlen + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) { flags |= WPI_TX_NEED_RTS; } else if ((ic->ic_flags & IEEE80211_F_USEPROT) && WPI_RATE_IS_OFDM(rate)) { if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) flags |= WPI_TX_NEED_CTS; else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) flags |= WPI_TX_NEED_RTS; } if (flags & (WPI_TX_NEED_RTS | WPI_TX_NEED_CTS)) flags |= WPI_TX_FULL_TXOP; } memset(tx, 0, sizeof (struct wpi_cmd_data)); if (type == IEEE80211_FC0_TYPE_MGT) { uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; /* Tell HW to set timestamp in probe responses. */ if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) flags |= WPI_TX_INSERT_TSTAMP; if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ || subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) tx->timeout = htole16(3); else tx->timeout = htole16(2); } if (ismcast || type != IEEE80211_FC0_TYPE_DATA) tx->id = WPI_ID_BROADCAST; else { if (wn->id == WPI_ID_UNDEFINED) { device_printf(sc->sc_dev, "%s: undefined node id\n", __func__); error = EINVAL; goto fail; } tx->id = wn->id; } if (k != NULL && !swcrypt) { switch (k->wk_cipher->ic_cipher) { case IEEE80211_CIPHER_AES_CCM: tx->security = WPI_CIPHER_CCMP; break; default: break; } memcpy(tx->key, k->wk_key, k->wk_keylen); } tx->len = htole16(totlen); tx->flags = htole32(flags); tx->plcp = rate2plcp(rate); tx->tid = tid; tx->lifetime = htole32(WPI_LIFETIME_INFINITE); tx->ofdm_mask = 0xff; tx->cck_mask = 0x0f; tx->rts_ntries = 7; tx->data_ntries = tp->maxretry; tx_data.ni = ni; tx_data.m = m; tx_data.size = sizeof(struct wpi_cmd_data); tx_data.code = WPI_CMD_TX_DATA; tx_data.ac = ac; return wpi_cmd2(sc, &tx_data); fail: m_freem(m); return error; } static int wpi_tx_data_raw(struct wpi_softc *sc, struct mbuf *m, struct ieee80211_node *ni, const struct ieee80211_bpf_params *params) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_key *k = NULL; struct ieee80211_frame *wh; struct wpi_buf tx_data; struct wpi_cmd_data *tx = (struct wpi_cmd_data *)&tx_data.data; uint32_t flags; uint8_t type; int ac, rate, swcrypt, totlen; wh = mtod(m, struct ieee80211_frame *); type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; ac = params->ibp_pri & 3; /* Choose a TX rate index. */ rate = params->ibp_rate0; flags = 0; if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) flags |= WPI_TX_NEED_ACK; if (params->ibp_flags & IEEE80211_BPF_RTS) flags |= WPI_TX_NEED_RTS; if (params->ibp_flags & IEEE80211_BPF_CTS) flags |= WPI_TX_NEED_CTS; if (flags & (WPI_TX_NEED_RTS | WPI_TX_NEED_CTS)) flags |= WPI_TX_FULL_TXOP; /* Encrypt the frame if need be. */ if (params->ibp_flags & IEEE80211_BPF_CRYPTO) { /* Retrieve key for TX. */ k = ieee80211_crypto_encap(ni, m); if (k == NULL) { m_freem(m); return ENOBUFS; } swcrypt = k->wk_flags & IEEE80211_KEY_SWCRYPT; /* 802.11 header may have moved. */ wh = mtod(m, struct ieee80211_frame *); } totlen = m->m_pkthdr.len; if (ieee80211_radiotap_active_vap(vap)) { struct wpi_tx_radiotap_header *tap = &sc->sc_txtap; tap->wt_flags = 0; tap->wt_rate = rate; if (params->ibp_flags & IEEE80211_BPF_CRYPTO) tap->wt_flags |= IEEE80211_RADIOTAP_F_WEP; ieee80211_radiotap_tx(vap, m); } memset(tx, 0, sizeof (struct wpi_cmd_data)); if (type == IEEE80211_FC0_TYPE_MGT) { uint8_t subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; /* Tell HW to set timestamp in probe responses. */ if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP) flags |= WPI_TX_INSERT_TSTAMP; if (subtype == IEEE80211_FC0_SUBTYPE_ASSOC_REQ || subtype == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) tx->timeout = htole16(3); else tx->timeout = htole16(2); } if (k != NULL && !swcrypt) { switch (k->wk_cipher->ic_cipher) { case IEEE80211_CIPHER_AES_CCM: tx->security = WPI_CIPHER_CCMP; break; default: break; } memcpy(tx->key, k->wk_key, k->wk_keylen); } tx->len = htole16(totlen); tx->flags = htole32(flags); tx->plcp = rate2plcp(rate); tx->id = WPI_ID_BROADCAST; tx->lifetime = htole32(WPI_LIFETIME_INFINITE); tx->rts_ntries = params->ibp_try1; tx->data_ntries = params->ibp_try0; tx_data.ni = ni; tx_data.m = m; tx_data.size = sizeof(struct wpi_cmd_data); tx_data.code = WPI_CMD_TX_DATA; tx_data.ac = ac; return wpi_cmd2(sc, &tx_data); } static int wpi_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, const struct ieee80211_bpf_params *params) { struct ieee80211com *ic = ni->ni_ic; struct ifnet *ifp = ic->ic_ifp; struct wpi_softc *sc = ifp->if_softc; int error = 0; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { ieee80211_free_node(ni); m_freem(m); return ENETDOWN; } WPI_TX_LOCK(sc); if (params == NULL) { /* * Legacy path; interpret frame contents to decide * precisely how to send the frame. */ error = wpi_tx_data(sc, m, ni); } else { /* * Caller supplied explicit parameters to use in * sending the frame. */ error = wpi_tx_data_raw(sc, m, ni, params); } WPI_TX_UNLOCK(sc); if (error != 0) { /* NB: m is reclaimed on tx failure */ ieee80211_free_node(ni); if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); return error; } DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return 0; } /** * Process data waiting to be sent on the IFNET output queue */ static void wpi_start(struct ifnet *ifp) { struct wpi_softc *sc = ifp->if_softc; struct ieee80211_node *ni; struct mbuf *m; WPI_TX_LOCK(sc); DPRINTF(sc, WPI_DEBUG_XMIT, "%s: called\n", __func__); for (;;) { IF_LOCK(&ifp->if_snd); if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0 || (ifp->if_drv_flags & IFF_DRV_OACTIVE)) { IF_UNLOCK(&ifp->if_snd); break; } IF_UNLOCK(&ifp->if_snd); IFQ_DRV_DEQUEUE(&ifp->if_snd, m); if (m == NULL) break; ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; if (wpi_tx_data(sc, m, ni) != 0) { ieee80211_free_node(ni); if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); } } DPRINTF(sc, WPI_DEBUG_XMIT, "%s: done\n", __func__); WPI_TX_UNLOCK(sc); } static void wpi_start_task(void *arg0, int pending) { struct wpi_softc *sc = arg0; struct ifnet *ifp = sc->sc_ifp; wpi_start(ifp); } static void wpi_watchdog_rfkill(void *arg) { struct wpi_softc *sc = arg; struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; DPRINTF(sc, WPI_DEBUG_WATCHDOG, "RFkill Watchdog: tick\n"); /* No need to lock firmware memory. */ if ((wpi_prph_read(sc, WPI_APMG_RFKILL) & 0x1) == 0) { /* Radio kill switch is still off. */ callout_reset(&sc->watchdog_rfkill, hz, wpi_watchdog_rfkill, sc); } else ieee80211_runtask(ic, &sc->sc_radioon_task); } static void wpi_scan_timeout(void *arg) { struct wpi_softc *sc = arg; struct ifnet *ifp = sc->sc_ifp; if_printf(ifp, "scan timeout\n"); taskqueue_enqueue(sc->sc_tq, &sc->sc_reinittask); } static void wpi_tx_timeout(void *arg) { struct wpi_softc *sc = arg; struct ifnet *ifp = sc->sc_ifp; if_printf(ifp, "device timeout\n"); if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); taskqueue_enqueue(sc->sc_tq, &sc->sc_reinittask); } static int wpi_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) { struct wpi_softc *sc = ifp->if_softc; struct ieee80211com *ic = ifp->if_l2com; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); struct ifreq *ifr = (struct ifreq *) data; int error = 0; switch (cmd) { case SIOCGIFADDR: error = ether_ioctl(ifp, cmd, data); break; case SIOCSIFFLAGS: if (ifp->if_flags & IFF_UP) { wpi_init(sc); if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0 && vap != NULL) ieee80211_stop(vap); } else if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) wpi_stop(sc); break; case SIOCGIFMEDIA: error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd); break; default: error = EINVAL; break; } return error; } /* * Send a command to the firmware. */ static int wpi_cmd(struct wpi_softc *sc, int code, const void *buf, size_t size, int async) { struct wpi_tx_ring *ring = &sc->txq[WPI_CMD_QUEUE_NUM]; struct wpi_tx_desc *desc; struct wpi_tx_data *data; struct wpi_tx_cmd *cmd; struct mbuf *m; bus_addr_t paddr; int totlen, error; WPI_TXQ_LOCK(sc); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); if (sc->txq_active == 0) { /* wpi_stop() was called */ error = 0; goto fail; } if (async == 0) WPI_LOCK_ASSERT(sc); DPRINTF(sc, WPI_DEBUG_CMD, "%s: cmd %s size %zu async %d\n", __func__, wpi_cmd_str(code), size, async); desc = &ring->desc[ring->cur]; data = &ring->data[ring->cur]; totlen = 4 + size; if (size > sizeof cmd->data) { /* Command is too large to fit in a descriptor. */ if (totlen > MCLBYTES) { error = EINVAL; goto fail; } m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUMPAGESIZE); if (m == NULL) { error = ENOMEM; goto fail; } cmd = mtod(m, struct wpi_tx_cmd *); error = bus_dmamap_load(ring->data_dmat, data->map, cmd, totlen, wpi_dma_map_addr, &paddr, BUS_DMA_NOWAIT); if (error != 0) { m_freem(m); goto fail; } data->m = m; } else { cmd = &ring->cmd[ring->cur]; paddr = data->cmd_paddr; } cmd->code = code; cmd->flags = 0; cmd->qid = ring->qid; cmd->idx = ring->cur; memcpy(cmd->data, buf, size); desc->nsegs = 1 + (WPI_PAD32(size) << 4); desc->segs[0].addr = htole32(paddr); desc->segs[0].len = htole32(totlen); if (size > sizeof cmd->data) { bus_dmamap_sync(ring->data_dmat, data->map, BUS_DMASYNC_PREWRITE); } else { bus_dmamap_sync(ring->data_dmat, ring->cmd_dma.map, BUS_DMASYNC_PREWRITE); } bus_dmamap_sync(ring->desc_dma.tag, ring->desc_dma.map, BUS_DMASYNC_PREWRITE); /* Kick command ring. */ ring->cur = (ring->cur + 1) % WPI_TX_RING_COUNT; wpi_update_tx_ring(sc, ring); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); WPI_TXQ_UNLOCK(sc); if (async) return 0; return mtx_sleep(cmd, &sc->sc_mtx, PCATCH, "wpicmd", hz); fail: DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); WPI_TXQ_UNLOCK(sc); return error; } /* * Configure HW multi-rate retries. */ static int wpi_mrr_setup(struct wpi_softc *sc) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct wpi_mrr_setup mrr; int i, error; /* CCK rates (not used with 802.11a). */ for (i = WPI_RIDX_CCK1; i <= WPI_RIDX_CCK11; i++) { mrr.rates[i].flags = 0; mrr.rates[i].plcp = wpi_ridx_to_plcp[i]; /* Fallback to the immediate lower CCK rate (if any.) */ mrr.rates[i].next = (i == WPI_RIDX_CCK1) ? WPI_RIDX_CCK1 : i - 1; /* Try twice at this rate before falling back to "next". */ mrr.rates[i].ntries = WPI_NTRIES_DEFAULT; } /* OFDM rates (not used with 802.11b). */ for (i = WPI_RIDX_OFDM6; i <= WPI_RIDX_OFDM54; i++) { mrr.rates[i].flags = 0; mrr.rates[i].plcp = wpi_ridx_to_plcp[i]; /* Fallback to the immediate lower rate (if any.) */ /* We allow fallback from OFDM/6 to CCK/2 in 11b/g mode. */ mrr.rates[i].next = (i == WPI_RIDX_OFDM6) ? ((ic->ic_curmode == IEEE80211_MODE_11A) ? WPI_RIDX_OFDM6 : WPI_RIDX_CCK2) : i - 1; /* Try twice at this rate before falling back to "next". */ mrr.rates[i].ntries = WPI_NTRIES_DEFAULT; } /* Setup MRR for control frames. */ mrr.which = htole32(WPI_MRR_CTL); error = wpi_cmd(sc, WPI_CMD_MRR_SETUP, &mrr, sizeof mrr, 0); if (error != 0) { device_printf(sc->sc_dev, "could not setup MRR for control frames\n"); return error; } /* Setup MRR for data frames. */ mrr.which = htole32(WPI_MRR_DATA); error = wpi_cmd(sc, WPI_CMD_MRR_SETUP, &mrr, sizeof mrr, 0); if (error != 0) { device_printf(sc->sc_dev, "could not setup MRR for data frames\n"); return error; } return 0; } static int wpi_add_node(struct wpi_softc *sc, struct ieee80211_node *ni) { struct ieee80211com *ic = ni->ni_ic; struct wpi_vap *wvp = WPI_VAP(ni->ni_vap); struct wpi_node *wn = WPI_NODE(ni); struct wpi_node_info node; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); if (wn->id == WPI_ID_UNDEFINED) return EINVAL; memset(&node, 0, sizeof node); IEEE80211_ADDR_COPY(node.macaddr, ni->ni_macaddr); node.id = wn->id; node.plcp = (ic->ic_curmode == IEEE80211_MODE_11A) ? wpi_ridx_to_plcp[WPI_RIDX_OFDM6] : wpi_ridx_to_plcp[WPI_RIDX_CCK1]; node.action = htole32(WPI_ACTION_SET_RATE); node.antenna = WPI_ANTENNA_BOTH; DPRINTF(sc, WPI_DEBUG_NODE, "%s: adding node %d (%s)\n", __func__, wn->id, ether_sprintf(ni->ni_macaddr)); error = wpi_cmd(sc, WPI_CMD_ADD_NODE, &node, sizeof node, 1); if (error != 0) { device_printf(sc->sc_dev, "%s: wpi_cmd() call failed with error code %d\n", __func__, error); return error; } if (wvp->wv_gtk != 0) { error = wpi_set_global_keys(ni); if (error != 0) { device_printf(sc->sc_dev, "%s: error while setting global keys\n", __func__); return ENXIO; } } return 0; } /* * Broadcast node is used to send group-addressed and management frames. */ static int wpi_add_broadcast_node(struct wpi_softc *sc, int async) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct wpi_node_info node; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); memset(&node, 0, sizeof node); IEEE80211_ADDR_COPY(node.macaddr, ifp->if_broadcastaddr); node.id = WPI_ID_BROADCAST; node.plcp = (ic->ic_curmode == IEEE80211_MODE_11A) ? wpi_ridx_to_plcp[WPI_RIDX_OFDM6] : wpi_ridx_to_plcp[WPI_RIDX_CCK1]; node.action = htole32(WPI_ACTION_SET_RATE); node.antenna = WPI_ANTENNA_BOTH; DPRINTF(sc, WPI_DEBUG_NODE, "%s: adding broadcast node\n", __func__); return wpi_cmd(sc, WPI_CMD_ADD_NODE, &node, sizeof node, async); } static int wpi_add_sta_node(struct wpi_softc *sc, struct ieee80211_node *ni) { struct wpi_node *wn = WPI_NODE(ni); int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); wn->id = wpi_add_node_entry_sta(sc); if ((error = wpi_add_node(sc, ni)) != 0) { wpi_del_node_entry(sc, wn->id); wn->id = WPI_ID_UNDEFINED; return error; } return 0; } static int wpi_add_ibss_node(struct wpi_softc *sc, struct ieee80211_node *ni) { struct wpi_node *wn = WPI_NODE(ni); int error; KASSERT(wn->id == WPI_ID_UNDEFINED, ("the node %d was added before", wn->id)); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); if ((wn->id = wpi_add_node_entry_adhoc(sc)) == WPI_ID_UNDEFINED) { device_printf(sc->sc_dev, "%s: h/w table is full\n", __func__); return ENOMEM; } if ((error = wpi_add_node(sc, ni)) != 0) { wpi_del_node_entry(sc, wn->id); wn->id = WPI_ID_UNDEFINED; return error; } return 0; } static void wpi_del_node(struct wpi_softc *sc, struct ieee80211_node *ni) { struct wpi_node *wn = WPI_NODE(ni); struct wpi_cmd_del_node node; int error; KASSERT(wn->id != WPI_ID_UNDEFINED, ("undefined node id passed")); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); memset(&node, 0, sizeof node); IEEE80211_ADDR_COPY(node.macaddr, ni->ni_macaddr); node.count = 1; DPRINTF(sc, WPI_DEBUG_NODE, "%s: deleting node %d (%s)\n", __func__, wn->id, ether_sprintf(ni->ni_macaddr)); error = wpi_cmd(sc, WPI_CMD_DEL_NODE, &node, sizeof node, 1); if (error != 0) { device_printf(sc->sc_dev, "%s: could not delete node %u, error %d\n", __func__, wn->id, error); } } static int wpi_updateedca(struct ieee80211com *ic) { #define WPI_EXP2(x) ((1 << (x)) - 1) /* CWmin = 2^ECWmin - 1 */ struct wpi_softc *sc = ic->ic_ifp->if_softc; struct wpi_edca_params cmd; int aci, error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); memset(&cmd, 0, sizeof cmd); cmd.flags = htole32(WPI_EDCA_UPDATE); for (aci = 0; aci < WME_NUM_AC; aci++) { const struct wmeParams *ac = &ic->ic_wme.wme_chanParams.cap_wmeParams[aci]; cmd.ac[aci].aifsn = ac->wmep_aifsn; cmd.ac[aci].cwmin = htole16(WPI_EXP2(ac->wmep_logcwmin)); cmd.ac[aci].cwmax = htole16(WPI_EXP2(ac->wmep_logcwmax)); cmd.ac[aci].txoplimit = htole16(IEEE80211_TXOP_TO_US(ac->wmep_txopLimit)); DPRINTF(sc, WPI_DEBUG_EDCA, "setting WME for queue %d aifsn=%d cwmin=%d cwmax=%d " "txoplimit=%d\n", aci, cmd.ac[aci].aifsn, cmd.ac[aci].cwmin, cmd.ac[aci].cwmax, cmd.ac[aci].txoplimit); } error = wpi_cmd(sc, WPI_CMD_EDCA_PARAMS, &cmd, sizeof cmd, 1); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return error; #undef WPI_EXP2 } static void wpi_set_promisc(struct wpi_softc *sc) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); uint32_t promisc_filter; promisc_filter = WPI_FILTER_CTL; if (vap != NULL && vap->iv_opmode != IEEE80211_M_HOSTAP) promisc_filter |= WPI_FILTER_PROMISC; if (ifp->if_flags & IFF_PROMISC) sc->rxon.filter |= htole32(promisc_filter); else sc->rxon.filter &= ~htole32(promisc_filter); } static void wpi_update_promisc(struct ifnet *ifp) { struct wpi_softc *sc = ifp->if_softc; WPI_RXON_LOCK(sc); wpi_set_promisc(sc); if (wpi_send_rxon(sc, 1, 1) != 0) { device_printf(sc->sc_dev, "%s: could not send RXON\n", __func__); } WPI_RXON_UNLOCK(sc); } static void wpi_update_mcast(struct ifnet *ifp) { /* Ignore */ } static void wpi_set_led(struct wpi_softc *sc, uint8_t which, uint8_t off, uint8_t on) { struct wpi_cmd_led led; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); led.which = which; led.unit = htole32(100000); /* on/off in unit of 100ms */ led.off = off; led.on = on; (void)wpi_cmd(sc, WPI_CMD_SET_LED, &led, sizeof led, 1); } static int wpi_set_timing(struct wpi_softc *sc, struct ieee80211_node *ni) { struct wpi_cmd_timing cmd; uint64_t val, mod; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); memset(&cmd, 0, sizeof cmd); memcpy(&cmd.tstamp, ni->ni_tstamp.data, sizeof (uint64_t)); cmd.bintval = htole16(ni->ni_intval); cmd.lintval = htole16(10); /* Compute remaining time until next beacon. */ val = (uint64_t)ni->ni_intval * IEEE80211_DUR_TU; mod = le64toh(cmd.tstamp) % val; cmd.binitval = htole32((uint32_t)(val - mod)); DPRINTF(sc, WPI_DEBUG_RESET, "timing bintval=%u tstamp=%ju, init=%u\n", ni->ni_intval, le64toh(cmd.tstamp), (uint32_t)(val - mod)); return wpi_cmd(sc, WPI_CMD_TIMING, &cmd, sizeof cmd, 1); } /* * This function is called periodically (every 60 seconds) to adjust output * power to temperature changes. */ static void wpi_power_calibration(struct wpi_softc *sc) { int temp; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); /* Update sensor data. */ temp = (int)WPI_READ(sc, WPI_UCODE_GP2); DPRINTF(sc, WPI_DEBUG_TEMP, "Temp in calibration is: %d\n", temp); /* Sanity-check read value. */ if (temp < -260 || temp > 25) { /* This can't be correct, ignore. */ DPRINTF(sc, WPI_DEBUG_TEMP, "out-of-range temperature reported: %d\n", temp); return; } DPRINTF(sc, WPI_DEBUG_TEMP, "temperature %d->%d\n", sc->temp, temp); /* Adjust Tx power if need be. */ if (abs(temp - sc->temp) <= 6) return; sc->temp = temp; if (wpi_set_txpower(sc, 1) != 0) { /* just warn, too bad for the automatic calibration... */ device_printf(sc->sc_dev,"could not adjust Tx power\n"); } } /* * Set TX power for current channel. */ static int wpi_set_txpower(struct wpi_softc *sc, int async) { struct wpi_power_group *group; struct wpi_cmd_txpower cmd; uint8_t chan; int idx, is_chan_5ghz, i; /* Retrieve current channel from last RXON. */ chan = sc->rxon.chan; is_chan_5ghz = (sc->rxon.flags & htole32(WPI_RXON_24GHZ)) == 0; /* Find the TX power group to which this channel belongs. */ if (is_chan_5ghz) { for (group = &sc->groups[1]; group < &sc->groups[4]; group++) if (chan <= group->chan) break; } else group = &sc->groups[0]; memset(&cmd, 0, sizeof cmd); cmd.band = is_chan_5ghz ? WPI_BAND_5GHZ : WPI_BAND_2GHZ; cmd.chan = htole16(chan); /* Set TX power for all OFDM and CCK rates. */ for (i = 0; i <= WPI_RIDX_MAX ; i++) { /* Retrieve TX power for this channel/rate. */ idx = wpi_get_power_index(sc, group, chan, is_chan_5ghz, i); cmd.rates[i].plcp = wpi_ridx_to_plcp[i]; if (is_chan_5ghz) { cmd.rates[i].rf_gain = wpi_rf_gain_5ghz[idx]; cmd.rates[i].dsp_gain = wpi_dsp_gain_5ghz[idx]; } else { cmd.rates[i].rf_gain = wpi_rf_gain_2ghz[idx]; cmd.rates[i].dsp_gain = wpi_dsp_gain_2ghz[idx]; } DPRINTF(sc, WPI_DEBUG_TEMP, "chan %d/ridx %d: power index %d\n", chan, i, idx); } return wpi_cmd(sc, WPI_CMD_TXPOWER, &cmd, sizeof cmd, async); } /* * Determine Tx power index for a given channel/rate combination. * This takes into account the regulatory information from EEPROM and the * current temperature. */ static int wpi_get_power_index(struct wpi_softc *sc, struct wpi_power_group *group, uint8_t chan, int is_chan_5ghz, int ridx) { /* Fixed-point arithmetic division using a n-bit fractional part. */ #define fdivround(a, b, n) \ ((((1 << n) * (a)) / (b) + (1 << n) / 2) / (1 << n)) /* Linear interpolation. */ #define interpolate(x, x1, y1, x2, y2, n) \ ((y1) + fdivround(((x) - (x1)) * ((y2) - (y1)), (x2) - (x1), n)) struct wpi_power_sample *sample; int pwr, idx; /* Default TX power is group maximum TX power minus 3dB. */ pwr = group->maxpwr / 2; /* Decrease TX power for highest OFDM rates to reduce distortion. */ switch (ridx) { case WPI_RIDX_OFDM36: pwr -= is_chan_5ghz ? 5 : 0; break; case WPI_RIDX_OFDM48: pwr -= is_chan_5ghz ? 10 : 7; break; case WPI_RIDX_OFDM54: pwr -= is_chan_5ghz ? 12 : 9; break; } /* Never exceed the channel maximum allowed TX power. */ pwr = min(pwr, sc->maxpwr[chan]); /* Retrieve TX power index into gain tables from samples. */ for (sample = group->samples; sample < &group->samples[3]; sample++) if (pwr > sample[1].power) break; /* Fixed-point linear interpolation using a 19-bit fractional part. */ idx = interpolate(pwr, sample[0].power, sample[0].index, sample[1].power, sample[1].index, 19); /*- * Adjust power index based on current temperature: * - if cooler than factory-calibrated: decrease output power * - if warmer than factory-calibrated: increase output power */ idx -= (sc->temp - group->temp) * 11 / 100; /* Decrease TX power for CCK rates (-5dB). */ if (ridx >= WPI_RIDX_CCK1) idx += 10; /* Make sure idx stays in a valid range. */ if (idx < 0) return 0; if (idx > WPI_MAX_PWR_INDEX) return WPI_MAX_PWR_INDEX; return idx; #undef interpolate #undef fdivround } /* * Set STA mode power saving level (between 0 and 5). * Level 0 is CAM (Continuously Aware Mode), 5 is for maximum power saving. */ static int wpi_set_pslevel(struct wpi_softc *sc, uint8_t dtim, int level, int async) { struct wpi_pmgt_cmd cmd; const struct wpi_pmgt *pmgt; uint32_t max, skip_dtim; uint32_t reg; int i; DPRINTF(sc, WPI_DEBUG_PWRSAVE, "%s: dtim=%d, level=%d, async=%d\n", __func__, dtim, level, async); /* Select which PS parameters to use. */ if (dtim <= 10) pmgt = &wpi_pmgt[0][level]; else pmgt = &wpi_pmgt[1][level]; memset(&cmd, 0, sizeof cmd); if (level != 0) /* not CAM */ cmd.flags |= htole16(WPI_PS_ALLOW_SLEEP); /* Retrieve PCIe Active State Power Management (ASPM). */ reg = pci_read_config(sc->sc_dev, sc->sc_cap_off + 0x10, 1); if (!(reg & 0x1)) /* L0s Entry disabled. */ cmd.flags |= htole16(WPI_PS_PCI_PMGT); cmd.rxtimeout = htole32(pmgt->rxtimeout * IEEE80211_DUR_TU); cmd.txtimeout = htole32(pmgt->txtimeout * IEEE80211_DUR_TU); if (dtim == 0) { dtim = 1; skip_dtim = 0; } else skip_dtim = pmgt->skip_dtim; if (skip_dtim != 0) { cmd.flags |= htole16(WPI_PS_SLEEP_OVER_DTIM); max = pmgt->intval[4]; if (max == (uint32_t)-1) max = dtim * (skip_dtim + 1); else if (max > dtim) max = (max / dtim) * dtim; } else max = dtim; for (i = 0; i < 5; i++) cmd.intval[i] = htole32(MIN(max, pmgt->intval[i])); return wpi_cmd(sc, WPI_CMD_SET_POWER_MODE, &cmd, sizeof cmd, async); } static int wpi_send_btcoex(struct wpi_softc *sc) { struct wpi_bluetooth cmd; memset(&cmd, 0, sizeof cmd); cmd.flags = WPI_BT_COEX_MODE_4WIRE; cmd.lead_time = WPI_BT_LEAD_TIME_DEF; cmd.max_kill = WPI_BT_MAX_KILL_DEF; DPRINTF(sc, WPI_DEBUG_RESET, "%s: configuring bluetooth coexistence\n", __func__); return wpi_cmd(sc, WPI_CMD_BT_COEX, &cmd, sizeof(cmd), 0); } static int wpi_send_rxon(struct wpi_softc *sc, int assoc, int async) { int error; if (async) WPI_RXON_LOCK_ASSERT(sc); if (assoc && wpi_check_bss_filter(sc) != 0) { struct wpi_assoc rxon_assoc; rxon_assoc.flags = sc->rxon.flags; rxon_assoc.filter = sc->rxon.filter; rxon_assoc.ofdm_mask = sc->rxon.ofdm_mask; rxon_assoc.cck_mask = sc->rxon.cck_mask; rxon_assoc.reserved = 0; error = wpi_cmd(sc, WPI_CMD_RXON_ASSOC, &rxon_assoc, sizeof (struct wpi_assoc), async); if (error != 0) { device_printf(sc->sc_dev, "RXON_ASSOC command failed, error %d\n", error); return error; } } else { if (async) { WPI_NT_LOCK(sc); error = wpi_cmd(sc, WPI_CMD_RXON, &sc->rxon, sizeof (struct wpi_rxon), async); if (error == 0) wpi_clear_node_table(sc); WPI_NT_UNLOCK(sc); } else { error = wpi_cmd(sc, WPI_CMD_RXON, &sc->rxon, sizeof (struct wpi_rxon), async); if (error == 0) wpi_clear_node_table(sc); } if (error != 0) { device_printf(sc->sc_dev, "RXON command failed, error %d\n", error); return error; } /* Add broadcast node. */ error = wpi_add_broadcast_node(sc, async); if (error != 0) { device_printf(sc->sc_dev, "could not add broadcast node, error %d\n", error); return error; } } /* Configuration has changed, set Tx power accordingly. */ if ((error = wpi_set_txpower(sc, async)) != 0) { device_printf(sc->sc_dev, "%s: could not set TX power, error %d\n", __func__, error); return error; } return 0; } /** * Configure the card to listen to a particular channel, this transisions the * card in to being able to receive frames from remote devices. */ static int wpi_config(struct wpi_softc *sc) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); struct ieee80211_channel *c = ic->ic_curchan; uint32_t flags; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); /* Set power saving level to CAM during initialization. */ if ((error = wpi_set_pslevel(sc, 0, 0, 0)) != 0) { device_printf(sc->sc_dev, "%s: could not set power saving level\n", __func__); return error; } /* Configure bluetooth coexistence. */ if ((error = wpi_send_btcoex(sc)) != 0) { device_printf(sc->sc_dev, "could not configure bluetooth coexistence\n"); return error; } /* Configure adapter. */ memset(&sc->rxon, 0, sizeof (struct wpi_rxon)); IEEE80211_ADDR_COPY(sc->rxon.myaddr, vap->iv_myaddr); /* Set default channel. */ sc->rxon.chan = ieee80211_chan2ieee(ic, c); sc->rxon.flags = htole32(WPI_RXON_TSF | WPI_RXON_CTS_TO_SELF); if (IEEE80211_IS_CHAN_2GHZ(c)) sc->rxon.flags |= htole32(WPI_RXON_AUTO | WPI_RXON_24GHZ); sc->rxon.filter = WPI_FILTER_MULTICAST; switch (ic->ic_opmode) { case IEEE80211_M_STA: sc->rxon.mode = WPI_MODE_STA; break; case IEEE80211_M_IBSS: sc->rxon.mode = WPI_MODE_IBSS; sc->rxon.filter |= WPI_FILTER_BEACON; break; case IEEE80211_M_HOSTAP: /* XXX workaround for beaconing */ sc->rxon.mode = WPI_MODE_IBSS; sc->rxon.filter |= WPI_FILTER_ASSOC | WPI_FILTER_PROMISC; break; case IEEE80211_M_AHDEMO: /* XXX workaround for passive channels selection */ sc->rxon.mode = WPI_MODE_HOSTAP; break; case IEEE80211_M_MONITOR: sc->rxon.mode = WPI_MODE_MONITOR; break; default: device_printf(sc->sc_dev, "unknown opmode %d\n", ic->ic_opmode); return EINVAL; } sc->rxon.filter = htole32(sc->rxon.filter); wpi_set_promisc(sc); sc->rxon.cck_mask = 0x0f; /* not yet negotiated */ sc->rxon.ofdm_mask = 0xff; /* not yet negotiated */ if ((error = wpi_send_rxon(sc, 0, 0)) != 0) { device_printf(sc->sc_dev, "%s: could not send RXON\n", __func__); return error; } /* Setup rate scalling. */ if ((error = wpi_mrr_setup(sc)) != 0) { device_printf(sc->sc_dev, "could not setup MRR, error %d\n", error); return error; } /* Disable beacon notifications (unused). */ flags = WPI_STATISTICS_BEACON_DISABLE; error = wpi_cmd(sc, WPI_CMD_GET_STATISTICS, &flags, sizeof flags, 1); if (error != 0) { device_printf(sc->sc_dev, "could not disable beacon statistics, error %d\n", error); return error; } DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return 0; } static uint16_t wpi_get_active_dwell_time(struct wpi_softc *sc, struct ieee80211_channel *c, uint8_t n_probes) { /* No channel? Default to 2GHz settings. */ if (c == NULL || IEEE80211_IS_CHAN_2GHZ(c)) { return (WPI_ACTIVE_DWELL_TIME_2GHZ + WPI_ACTIVE_DWELL_FACTOR_2GHZ * (n_probes + 1)); } /* 5GHz dwell time. */ return (WPI_ACTIVE_DWELL_TIME_5GHZ + WPI_ACTIVE_DWELL_FACTOR_5GHZ * (n_probes + 1)); } /* * Limit the total dwell time to 85% of the beacon interval. * * Returns the dwell time in milliseconds. */ static uint16_t wpi_limit_dwell(struct wpi_softc *sc, uint16_t dwell_time) { struct ieee80211com *ic = sc->sc_ifp->if_l2com; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); int bintval = 0; /* bintval is in TU (1.024mS) */ if (vap != NULL) bintval = vap->iv_bss->ni_intval; /* * If it's non-zero, we should calculate the minimum of * it and the DWELL_BASE. * * XXX Yes, the math should take into account that bintval * is 1.024mS, not 1mS.. */ if (bintval > 0) { DPRINTF(sc, WPI_DEBUG_SCAN, "%s: bintval=%d\n", __func__, bintval); return (MIN(WPI_PASSIVE_DWELL_BASE, ((bintval * 85) / 100))); } /* No association context? Default. */ return (WPI_PASSIVE_DWELL_BASE); } static uint16_t wpi_get_passive_dwell_time(struct wpi_softc *sc, struct ieee80211_channel *c) { uint16_t passive; if (c == NULL || IEEE80211_IS_CHAN_2GHZ(c)) passive = WPI_PASSIVE_DWELL_BASE + WPI_PASSIVE_DWELL_TIME_2GHZ; else passive = WPI_PASSIVE_DWELL_BASE + WPI_PASSIVE_DWELL_TIME_5GHZ; /* Clamp to the beacon interval if we're associated. */ return (wpi_limit_dwell(sc, passive)); } /* * Send a scan request to the firmware. */ static int wpi_scan(struct wpi_softc *sc, struct ieee80211_channel *c) { struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct ieee80211_scan_state *ss = ic->ic_scan; struct ieee80211vap *vap = ss->ss_vap; struct wpi_scan_hdr *hdr; struct wpi_cmd_data *tx; struct wpi_scan_essid *essids; struct wpi_scan_chan *chan; struct ieee80211_frame *wh; struct ieee80211_rateset *rs; uint16_t dwell_active, dwell_passive; uint8_t *buf, *frm; int buflen, error, i, nssid; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); /* * We are absolutely not allowed to send a scan command when another * scan command is pending. */ if (callout_pending(&sc->scan_timeout)) { device_printf(sc->sc_dev, "%s: called whilst scanning!\n", __func__); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); return (EAGAIN); } buf = malloc(WPI_SCAN_MAXSZ, M_DEVBUF, M_NOWAIT | M_ZERO); if (buf == NULL) { device_printf(sc->sc_dev, "%s: could not allocate buffer for scan command\n", __func__); error = ENOMEM; goto fail; } hdr = (struct wpi_scan_hdr *)buf; /* * Move to the next channel if no packets are received within 10 msecs * after sending the probe request. */ hdr->quiet_time = htole16(10); /* timeout in milliseconds */ hdr->quiet_threshold = htole16(1); /* min # of packets */ /* * Max needs to be greater than active and passive and quiet! * It's also in microseconds! */ hdr->max_svc = htole32(250 * IEEE80211_DUR_TU); hdr->pause_svc = htole32((4 << 24) | (100 * IEEE80211_DUR_TU)); /* Hardcode for now */ hdr->filter = htole32(WPI_FILTER_MULTICAST | WPI_FILTER_BEACON); tx = (struct wpi_cmd_data *)(hdr + 1); tx->flags = htole32(WPI_TX_AUTO_SEQ); tx->id = WPI_ID_BROADCAST; tx->lifetime = htole32(WPI_LIFETIME_INFINITE); if (IEEE80211_IS_CHAN_5GHZ(c)) { /* Send probe requests at 6Mbps. */ tx->plcp = wpi_ridx_to_plcp[WPI_RIDX_OFDM6]; rs = &ic->ic_sup_rates[IEEE80211_MODE_11A]; } else { hdr->flags = htole32(WPI_RXON_24GHZ | WPI_RXON_AUTO); /* Send probe requests at 1Mbps. */ tx->plcp = wpi_ridx_to_plcp[WPI_RIDX_CCK1]; rs = &ic->ic_sup_rates[IEEE80211_MODE_11G]; } essids = (struct wpi_scan_essid *)(tx + 1); nssid = MIN(ss->ss_nssid, WPI_SCAN_MAX_ESSIDS); for (i = 0; i < nssid; i++) { essids[i].id = IEEE80211_ELEMID_SSID; essids[i].len = MIN(ss->ss_ssid[i].len, IEEE80211_NWID_LEN); memcpy(essids[i].data, ss->ss_ssid[i].ssid, essids[i].len); #ifdef WPI_DEBUG if (sc->sc_debug & WPI_DEBUG_SCAN) { printf("Scanning Essid: "); ieee80211_print_essid(essids[i].data, essids[i].len); printf("\n"); } #endif } /* * Build a probe request frame. Most of the following code is a * copy & paste of what is done in net80211. */ wh = (struct ieee80211_frame *)(essids + WPI_SCAN_MAX_ESSIDS); wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ; wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr); IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); IEEE80211_ADDR_COPY(wh->i_addr3, ifp->if_broadcastaddr); *(uint16_t *)&wh->i_dur[0] = 0; /* filled by h/w */ *(uint16_t *)&wh->i_seq[0] = 0; /* filled by h/w */ frm = (uint8_t *)(wh + 1); frm = ieee80211_add_ssid(frm, NULL, 0); frm = ieee80211_add_rates(frm, rs); if (rs->rs_nrates > IEEE80211_RATE_SIZE) frm = ieee80211_add_xrates(frm, rs); /* Set length of probe request. */ tx->len = htole16(frm - (uint8_t *)wh); /* * Construct information about the channel that we * want to scan. The firmware expects this to be directly * after the scan probe request */ chan = (struct wpi_scan_chan *)frm; chan->chan = htole16(ieee80211_chan2ieee(ic, c)); chan->flags = 0; if (nssid) { hdr->crc_threshold = WPI_SCAN_CRC_TH_DEFAULT; chan->flags |= WPI_CHAN_NPBREQS(nssid); } else hdr->crc_threshold = WPI_SCAN_CRC_TH_NEVER; if (!IEEE80211_IS_CHAN_PASSIVE(c)) chan->flags |= WPI_CHAN_ACTIVE; /* * Calculate the active/passive dwell times. */ dwell_active = wpi_get_active_dwell_time(sc, c, nssid); dwell_passive = wpi_get_passive_dwell_time(sc, c); /* Make sure they're valid. */ if (dwell_passive <= dwell_active) dwell_passive = dwell_active + 1; chan->active = htole16(dwell_active); chan->passive = htole16(dwell_passive); chan->dsp_gain = 0x6e; /* Default level */ if (IEEE80211_IS_CHAN_5GHZ(c)) chan->rf_gain = 0x3b; else chan->rf_gain = 0x28; DPRINTF(sc, WPI_DEBUG_SCAN, "Scanning %u Passive: %d\n", chan->chan, IEEE80211_IS_CHAN_PASSIVE(c)); hdr->nchan++; + + if (hdr->nchan == 1 && sc->rxon.chan == chan->chan) { + /* XXX Force probe request transmission. */ + memcpy(chan + 1, chan, sizeof (struct wpi_scan_chan)); + + chan++; + + /* Reduce unnecessary delay. */ + chan->flags = 0; + chan->passive = chan->active = hdr->quiet_time; + + hdr->nchan++; + } + chan++; buflen = (uint8_t *)chan - buf; hdr->len = htole16(buflen); DPRINTF(sc, WPI_DEBUG_CMD, "sending scan command nchan=%d\n", hdr->nchan); error = wpi_cmd(sc, WPI_CMD_SCAN, buf, buflen, 1); free(buf, M_DEVBUF); if (error != 0) goto fail; callout_reset(&sc->scan_timeout, 5*hz, wpi_scan_timeout, sc); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return 0; fail: DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); return error; } static int wpi_auth(struct wpi_softc *sc, struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni = vap->iv_bss; struct ieee80211_channel *c = ni->ni_chan; int error; WPI_RXON_LOCK(sc); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); /* Update adapter configuration. */ sc->rxon.associd = 0; sc->rxon.filter &= ~htole32(WPI_FILTER_BSS); IEEE80211_ADDR_COPY(sc->rxon.bssid, ni->ni_bssid); sc->rxon.chan = ieee80211_chan2ieee(ic, c); sc->rxon.flags = htole32(WPI_RXON_TSF | WPI_RXON_CTS_TO_SELF); if (IEEE80211_IS_CHAN_2GHZ(c)) sc->rxon.flags |= htole32(WPI_RXON_AUTO | WPI_RXON_24GHZ); if (ic->ic_flags & IEEE80211_F_SHSLOT) sc->rxon.flags |= htole32(WPI_RXON_SHSLOT); if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) sc->rxon.flags |= htole32(WPI_RXON_SHPREAMBLE); if (IEEE80211_IS_CHAN_A(c)) { sc->rxon.cck_mask = 0; sc->rxon.ofdm_mask = 0x15; } else if (IEEE80211_IS_CHAN_B(c)) { sc->rxon.cck_mask = 0x03; sc->rxon.ofdm_mask = 0; } else { /* Assume 802.11b/g. */ sc->rxon.cck_mask = 0x0f; sc->rxon.ofdm_mask = 0x15; } DPRINTF(sc, WPI_DEBUG_STATE, "rxon chan %d flags %x cck %x ofdm %x\n", sc->rxon.chan, sc->rxon.flags, sc->rxon.cck_mask, sc->rxon.ofdm_mask); if ((error = wpi_send_rxon(sc, 0, 1)) != 0) { device_printf(sc->sc_dev, "%s: could not send RXON\n", __func__); } DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); WPI_RXON_UNLOCK(sc); return error; } static int wpi_config_beacon(struct wpi_vap *wvp) { struct ieee80211com *ic = wvp->wv_vap.iv_ic; struct ieee80211_beacon_offsets *bo = &wvp->wv_boff; struct wpi_buf *bcn = &wvp->wv_bcbuf; struct wpi_softc *sc = ic->ic_ifp->if_softc; struct wpi_cmd_beacon *cmd = (struct wpi_cmd_beacon *)&bcn->data; struct ieee80211_tim_ie *tie; struct mbuf *m; uint8_t *ptr; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); WPI_VAP_LOCK_ASSERT(wvp); cmd->len = htole16(bcn->m->m_pkthdr.len); cmd->plcp = (ic->ic_curmode == IEEE80211_MODE_11A) ? wpi_ridx_to_plcp[WPI_RIDX_OFDM6] : wpi_ridx_to_plcp[WPI_RIDX_CCK1]; /* XXX seems to be unused */ if (*(bo->bo_tim) == IEEE80211_ELEMID_TIM) { tie = (struct ieee80211_tim_ie *) bo->bo_tim; ptr = mtod(bcn->m, uint8_t *); cmd->tim = htole16(bo->bo_tim - ptr); cmd->timsz = tie->tim_len; } /* Necessary for recursion in ieee80211_beacon_update(). */ m = bcn->m; bcn->m = m_dup(m, M_NOWAIT); if (bcn->m == NULL) { device_printf(sc->sc_dev, "%s: could not copy beacon frame\n", __func__); error = ENOMEM; goto end; } if ((error = wpi_cmd2(sc, bcn)) != 0) { device_printf(sc->sc_dev, "%s: could not update beacon frame, error %d", __func__, error); } /* Restore mbuf. */ end: bcn->m = m; return error; } static int wpi_setup_beacon(struct wpi_softc *sc, struct ieee80211_node *ni) { struct wpi_vap *wvp = WPI_VAP(ni->ni_vap); struct wpi_buf *bcn = &wvp->wv_bcbuf; struct ieee80211_beacon_offsets *bo = &wvp->wv_boff; struct mbuf *m; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); if (ni->ni_chan == IEEE80211_CHAN_ANYC) return EINVAL; m = ieee80211_beacon_alloc(ni, bo); if (m == NULL) { device_printf(sc->sc_dev, "%s: could not allocate beacon frame\n", __func__); return ENOMEM; } WPI_VAP_LOCK(wvp); if (bcn->m != NULL) m_freem(bcn->m); bcn->m = m; error = wpi_config_beacon(wvp); WPI_VAP_UNLOCK(wvp); return error; } static void wpi_update_beacon(struct ieee80211vap *vap, int item) { struct wpi_softc *sc = vap->iv_ic->ic_ifp->if_softc; struct wpi_vap *wvp = WPI_VAP(vap); struct wpi_buf *bcn = &wvp->wv_bcbuf; struct ieee80211_beacon_offsets *bo = &wvp->wv_boff; struct ieee80211_node *ni = vap->iv_bss; int mcast = 0; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); WPI_VAP_LOCK(wvp); if (bcn->m == NULL) { bcn->m = ieee80211_beacon_alloc(ni, bo); if (bcn->m == NULL) { device_printf(sc->sc_dev, "%s: could not allocate beacon frame\n", __func__); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); WPI_VAP_UNLOCK(wvp); return; } } WPI_VAP_UNLOCK(wvp); if (item == IEEE80211_BEACON_TIM) mcast = 1; /* TODO */ setbit(bo->bo_flags, item); ieee80211_beacon_update(ni, bo, bcn->m, mcast); WPI_VAP_LOCK(wvp); wpi_config_beacon(wvp); WPI_VAP_UNLOCK(wvp); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); } static void wpi_newassoc(struct ieee80211_node *ni, int isnew) { struct ieee80211vap *vap = ni->ni_vap; struct wpi_softc *sc = ni->ni_ic->ic_ifp->if_softc; struct wpi_node *wn = WPI_NODE(ni); int error; WPI_NT_LOCK(sc); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); if (vap->iv_opmode != IEEE80211_M_STA && wn->id == WPI_ID_UNDEFINED) { if ((error = wpi_add_ibss_node(sc, ni)) != 0) { device_printf(sc->sc_dev, "%s: could not add IBSS node, error %d\n", __func__, error); } } WPI_NT_UNLOCK(sc); } static int wpi_run(struct wpi_softc *sc, struct ieee80211vap *vap) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni = vap->iv_bss; struct ieee80211_channel *c = ni->ni_chan; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); if (vap->iv_opmode == IEEE80211_M_MONITOR) { /* Link LED blinks while monitoring. */ wpi_set_led(sc, WPI_LED_LINK, 5, 5); return 0; } /* XXX kernel panic workaround */ if (c == IEEE80211_CHAN_ANYC) { device_printf(sc->sc_dev, "%s: incomplete configuration\n", __func__); return EINVAL; } if ((error = wpi_set_timing(sc, ni)) != 0) { device_printf(sc->sc_dev, "%s: could not set timing, error %d\n", __func__, error); return error; } /* Update adapter configuration. */ WPI_RXON_LOCK(sc); IEEE80211_ADDR_COPY(sc->rxon.bssid, ni->ni_bssid); sc->rxon.associd = htole16(IEEE80211_NODE_AID(ni)); sc->rxon.chan = ieee80211_chan2ieee(ic, c); sc->rxon.flags = htole32(WPI_RXON_TSF | WPI_RXON_CTS_TO_SELF); if (IEEE80211_IS_CHAN_2GHZ(c)) sc->rxon.flags |= htole32(WPI_RXON_AUTO | WPI_RXON_24GHZ); if (ic->ic_flags & IEEE80211_F_SHSLOT) sc->rxon.flags |= htole32(WPI_RXON_SHSLOT); if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) sc->rxon.flags |= htole32(WPI_RXON_SHPREAMBLE); if (IEEE80211_IS_CHAN_A(c)) { sc->rxon.cck_mask = 0; sc->rxon.ofdm_mask = 0x15; } else if (IEEE80211_IS_CHAN_B(c)) { sc->rxon.cck_mask = 0x03; sc->rxon.ofdm_mask = 0; } else { /* Assume 802.11b/g. */ sc->rxon.cck_mask = 0x0f; sc->rxon.ofdm_mask = 0x15; } sc->rxon.filter |= htole32(WPI_FILTER_BSS); DPRINTF(sc, WPI_DEBUG_STATE, "rxon chan %d flags %x\n", sc->rxon.chan, sc->rxon.flags); if ((error = wpi_send_rxon(sc, 0, 1)) != 0) { device_printf(sc->sc_dev, "%s: could not send RXON\n", __func__); return error; } /* Start periodic calibration timer. */ callout_reset(&sc->calib_to, 60*hz, wpi_calib_timeout, sc); WPI_RXON_UNLOCK(sc); if (vap->iv_opmode == IEEE80211_M_IBSS || vap->iv_opmode == IEEE80211_M_HOSTAP) { if ((error = wpi_setup_beacon(sc, ni)) != 0) { device_printf(sc->sc_dev, "%s: could not setup beacon, error %d\n", __func__, error); return error; } } if (vap->iv_opmode == IEEE80211_M_STA) { /* Add BSS node. */ WPI_NT_LOCK(sc); error = wpi_add_sta_node(sc, ni); WPI_NT_UNLOCK(sc); if (error != 0) { device_printf(sc->sc_dev, "%s: could not add BSS node, error %d\n", __func__, error); return error; } } /* Link LED always on while associated. */ wpi_set_led(sc, WPI_LED_LINK, 0, 1); /* Enable power-saving mode if requested by user. */ if ((vap->iv_flags & IEEE80211_F_PMGTON) && vap->iv_opmode != IEEE80211_M_IBSS) (void)wpi_set_pslevel(sc, 0, 3, 1); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); return 0; } static int wpi_load_key(struct ieee80211_node *ni, const struct ieee80211_key *k) { const struct ieee80211_cipher *cip = k->wk_cipher; struct ieee80211vap *vap = ni->ni_vap; struct wpi_softc *sc = ni->ni_ic->ic_ifp->if_softc; struct wpi_node *wn = WPI_NODE(ni); struct wpi_node_info node; uint16_t kflags; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); if (wpi_check_node_entry(sc, wn->id) == 0) { device_printf(sc->sc_dev, "%s: node does not exist\n", __func__); return 0; } switch (cip->ic_cipher) { case IEEE80211_CIPHER_AES_CCM: kflags = WPI_KFLAG_CCMP; break; default: device_printf(sc->sc_dev, "%s: unknown cipher %d\n", __func__, cip->ic_cipher); return 0; } kflags |= WPI_KFLAG_KID(k->wk_keyix); if (k->wk_flags & IEEE80211_KEY_GROUP) kflags |= WPI_KFLAG_MULTICAST; memset(&node, 0, sizeof node); node.id = wn->id; node.control = WPI_NODE_UPDATE; node.flags = WPI_FLAG_KEY_SET; node.kflags = htole16(kflags); memcpy(node.key, k->wk_key, k->wk_keylen); again: DPRINTF(sc, WPI_DEBUG_KEY, "%s: setting %s key id %d for node %d (%s)\n", __func__, (kflags & WPI_KFLAG_MULTICAST) ? "group" : "ucast", k->wk_keyix, node.id, ether_sprintf(ni->ni_macaddr)); error = wpi_cmd(sc, WPI_CMD_ADD_NODE, &node, sizeof node, 1); if (error != 0) { device_printf(sc->sc_dev, "can't update node info, error %d\n", error); return !error; } if (!(kflags & WPI_KFLAG_MULTICAST) && &vap->iv_nw_keys[0] <= k && k < &vap->iv_nw_keys[IEEE80211_WEP_NKID]) { kflags |= WPI_KFLAG_MULTICAST; node.kflags = htole16(kflags); goto again; } return 1; } static void wpi_load_key_cb(void *arg, struct ieee80211_node *ni) { const struct ieee80211_key *k = arg; struct ieee80211vap *vap = ni->ni_vap; struct wpi_softc *sc = ni->ni_ic->ic_ifp->if_softc; struct wpi_node *wn = WPI_NODE(ni); int error; if (vap->iv_bss == ni && wn->id == WPI_ID_UNDEFINED) return; WPI_NT_LOCK(sc); error = wpi_load_key(ni, k); WPI_NT_UNLOCK(sc); if (error == 0) { device_printf(sc->sc_dev, "%s: error while setting key\n", __func__); } } static int wpi_set_global_keys(struct ieee80211_node *ni) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211_key *wk = &vap->iv_nw_keys[0]; int error = 1; for (; wk < &vap->iv_nw_keys[IEEE80211_WEP_NKID] && error; wk++) if (wk->wk_keyix != IEEE80211_KEYIX_NONE) error = wpi_load_key(ni, wk); return !error; } static int wpi_del_key(struct ieee80211_node *ni, const struct ieee80211_key *k) { struct ieee80211vap *vap = ni->ni_vap; struct wpi_softc *sc = ni->ni_ic->ic_ifp->if_softc; struct wpi_node *wn = WPI_NODE(ni); struct wpi_node_info node; uint16_t kflags; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); if (wpi_check_node_entry(sc, wn->id) == 0) { DPRINTF(sc, WPI_DEBUG_KEY, "%s: node was removed\n", __func__); return 1; /* Nothing to do. */ } kflags = WPI_KFLAG_KID(k->wk_keyix); if (k->wk_flags & IEEE80211_KEY_GROUP) kflags |= WPI_KFLAG_MULTICAST; memset(&node, 0, sizeof node); node.id = wn->id; node.control = WPI_NODE_UPDATE; node.flags = WPI_FLAG_KEY_SET; node.kflags = htole16(kflags); again: DPRINTF(sc, WPI_DEBUG_KEY, "%s: deleting %s key %d for node %d (%s)\n", __func__, (kflags & WPI_KFLAG_MULTICAST) ? "group" : "ucast", k->wk_keyix, node.id, ether_sprintf(ni->ni_macaddr)); error = wpi_cmd(sc, WPI_CMD_ADD_NODE, &node, sizeof node, 1); if (error != 0) { device_printf(sc->sc_dev, "can't update node info, error %d\n", error); return !error; } if (!(kflags & WPI_KFLAG_MULTICAST) && &vap->iv_nw_keys[0] <= k && k < &vap->iv_nw_keys[IEEE80211_WEP_NKID]) { kflags |= WPI_KFLAG_MULTICAST; node.kflags = htole16(kflags); goto again; } return 1; } static void wpi_del_key_cb(void *arg, struct ieee80211_node *ni) { const struct ieee80211_key *k = arg; struct ieee80211vap *vap = ni->ni_vap; struct wpi_softc *sc = ni->ni_ic->ic_ifp->if_softc; struct wpi_node *wn = WPI_NODE(ni); int error; if (vap->iv_bss == ni && wn->id == WPI_ID_UNDEFINED) return; WPI_NT_LOCK(sc); error = wpi_del_key(ni, k); WPI_NT_UNLOCK(sc); if (error == 0) { device_printf(sc->sc_dev, "%s: error while deleting key\n", __func__); } } static int wpi_process_key(struct ieee80211vap *vap, const struct ieee80211_key *k, int set) { struct ieee80211com *ic = vap->iv_ic; struct wpi_softc *sc = ic->ic_ifp->if_softc; struct wpi_vap *wvp = WPI_VAP(vap); struct ieee80211_node *ni; int error, ni_ref = 0; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); if (k->wk_flags & IEEE80211_KEY_SWCRYPT) { /* Not for us. */ return 1; } if (!(k->wk_flags & IEEE80211_KEY_RECV)) { /* XMIT keys are handled in wpi_tx_data(). */ return 1; } /* Handle group keys. */ if (&vap->iv_nw_keys[0] <= k && k < &vap->iv_nw_keys[IEEE80211_WEP_NKID]) { WPI_NT_LOCK(sc); if (set) wvp->wv_gtk |= WPI_VAP_KEY(k->wk_keyix); else wvp->wv_gtk &= ~WPI_VAP_KEY(k->wk_keyix); WPI_NT_UNLOCK(sc); if (vap->iv_state == IEEE80211_S_RUN) { ieee80211_iterate_nodes(&ic->ic_sta, set ? wpi_load_key_cb : wpi_del_key_cb, __DECONST(void *, k)); } return 1; } switch (vap->iv_opmode) { case IEEE80211_M_STA: ni = vap->iv_bss; break; case IEEE80211_M_IBSS: case IEEE80211_M_AHDEMO: case IEEE80211_M_HOSTAP: ni = ieee80211_find_vap_node(&ic->ic_sta, vap, k->wk_macaddr); if (ni == NULL) return 0; /* should not happen */ ni_ref = 1; break; default: device_printf(sc->sc_dev, "%s: unknown opmode %d\n", __func__, vap->iv_opmode); return 0; } WPI_NT_LOCK(sc); if (set) error = wpi_load_key(ni, k); else error = wpi_del_key(ni, k); WPI_NT_UNLOCK(sc); if (ni_ref) ieee80211_node_decref(ni); return error; } static int wpi_key_set(struct ieee80211vap *vap, const struct ieee80211_key *k, const uint8_t mac[IEEE80211_ADDR_LEN]) { return wpi_process_key(vap, k, 1); } static int wpi_key_delete(struct ieee80211vap *vap, const struct ieee80211_key *k) { return wpi_process_key(vap, k, 0); } /* * This function is called after the runtime firmware notifies us of its * readiness (called in a process context). */ static int wpi_post_alive(struct wpi_softc *sc) { int ntries, error; /* Check (again) that the radio is not disabled. */ if ((error = wpi_nic_lock(sc)) != 0) return error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); /* NB: Runtime firmware must be up and running. */ if (!(wpi_prph_read(sc, WPI_APMG_RFKILL) & 1)) { device_printf(sc->sc_dev, "RF switch: radio disabled (%s)\n", __func__); wpi_nic_unlock(sc); return EPERM; /* :-) */ } wpi_nic_unlock(sc); /* Wait for thermal sensor to calibrate. */ for (ntries = 0; ntries < 1000; ntries++) { if ((sc->temp = (int)WPI_READ(sc, WPI_UCODE_GP2)) != 0) break; DELAY(10); } if (ntries == 1000) { device_printf(sc->sc_dev, "timeout waiting for thermal sensor calibration\n"); return ETIMEDOUT; } DPRINTF(sc, WPI_DEBUG_TEMP, "temperature %d\n", sc->temp); return 0; } /* * The firmware boot code is small and is intended to be copied directly into * the NIC internal memory (no DMA transfer). */ static int wpi_load_bootcode(struct wpi_softc *sc, const uint8_t *ucode, int size) { int error, ntries; DPRINTF(sc, WPI_DEBUG_HW, "Loading microcode size 0x%x\n", size); size /= sizeof (uint32_t); if ((error = wpi_nic_lock(sc)) != 0) return error; /* Copy microcode image into NIC memory. */ wpi_prph_write_region_4(sc, WPI_BSM_SRAM_BASE, (const uint32_t *)ucode, size); wpi_prph_write(sc, WPI_BSM_WR_MEM_SRC, 0); wpi_prph_write(sc, WPI_BSM_WR_MEM_DST, WPI_FW_TEXT_BASE); wpi_prph_write(sc, WPI_BSM_WR_DWCOUNT, size); /* Start boot load now. */ wpi_prph_write(sc, WPI_BSM_WR_CTRL, WPI_BSM_WR_CTRL_START); /* Wait for transfer to complete. */ for (ntries = 0; ntries < 1000; ntries++) { uint32_t status = WPI_READ(sc, WPI_FH_TX_STATUS); DPRINTF(sc, WPI_DEBUG_HW, "firmware status=0x%x, val=0x%x, result=0x%x\n", status, WPI_FH_TX_STATUS_IDLE(6), status & WPI_FH_TX_STATUS_IDLE(6)); if (status & WPI_FH_TX_STATUS_IDLE(6)) { DPRINTF(sc, WPI_DEBUG_HW, "Status Match! - ntries = %d\n", ntries); break; } DELAY(10); } if (ntries == 1000) { device_printf(sc->sc_dev, "%s: could not load boot firmware\n", __func__); wpi_nic_unlock(sc); return ETIMEDOUT; } /* Enable boot after power up. */ wpi_prph_write(sc, WPI_BSM_WR_CTRL, WPI_BSM_WR_CTRL_START_EN); wpi_nic_unlock(sc); return 0; } static int wpi_load_firmware(struct wpi_softc *sc) { struct wpi_fw_info *fw = &sc->fw; struct wpi_dma_info *dma = &sc->fw_dma; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); /* Copy initialization sections into pre-allocated DMA-safe memory. */ memcpy(dma->vaddr, fw->init.data, fw->init.datasz); bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); memcpy(dma->vaddr + WPI_FW_DATA_MAXSZ, fw->init.text, fw->init.textsz); bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); /* Tell adapter where to find initialization sections. */ if ((error = wpi_nic_lock(sc)) != 0) return error; wpi_prph_write(sc, WPI_BSM_DRAM_DATA_ADDR, dma->paddr); wpi_prph_write(sc, WPI_BSM_DRAM_DATA_SIZE, fw->init.datasz); wpi_prph_write(sc, WPI_BSM_DRAM_TEXT_ADDR, dma->paddr + WPI_FW_DATA_MAXSZ); wpi_prph_write(sc, WPI_BSM_DRAM_TEXT_SIZE, fw->init.textsz); wpi_nic_unlock(sc); /* Load firmware boot code. */ error = wpi_load_bootcode(sc, fw->boot.text, fw->boot.textsz); if (error != 0) { device_printf(sc->sc_dev, "%s: could not load boot firmware\n", __func__); return error; } /* Now press "execute". */ WPI_WRITE(sc, WPI_RESET, 0); /* Wait at most one second for first alive notification. */ if ((error = mtx_sleep(sc, &sc->sc_mtx, PCATCH, "wpiinit", hz)) != 0) { device_printf(sc->sc_dev, "%s: timeout waiting for adapter to initialize, error %d\n", __func__, error); return error; } /* Copy runtime sections into pre-allocated DMA-safe memory. */ memcpy(dma->vaddr, fw->main.data, fw->main.datasz); bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); memcpy(dma->vaddr + WPI_FW_DATA_MAXSZ, fw->main.text, fw->main.textsz); bus_dmamap_sync(dma->tag, dma->map, BUS_DMASYNC_PREWRITE); /* Tell adapter where to find runtime sections. */ if ((error = wpi_nic_lock(sc)) != 0) return error; wpi_prph_write(sc, WPI_BSM_DRAM_DATA_ADDR, dma->paddr); wpi_prph_write(sc, WPI_BSM_DRAM_DATA_SIZE, fw->main.datasz); wpi_prph_write(sc, WPI_BSM_DRAM_TEXT_ADDR, dma->paddr + WPI_FW_DATA_MAXSZ); wpi_prph_write(sc, WPI_BSM_DRAM_TEXT_SIZE, WPI_FW_UPDATED | fw->main.textsz); wpi_nic_unlock(sc); return 0; } static int wpi_read_firmware(struct wpi_softc *sc) { const struct firmware *fp; struct wpi_fw_info *fw = &sc->fw; const struct wpi_firmware_hdr *hdr; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); DPRINTF(sc, WPI_DEBUG_FIRMWARE, "Attempting Loading Firmware from %s module\n", WPI_FW_NAME); WPI_UNLOCK(sc); fp = firmware_get(WPI_FW_NAME); WPI_LOCK(sc); if (fp == NULL) { device_printf(sc->sc_dev, "could not load firmware image '%s'\n", WPI_FW_NAME); return EINVAL; } sc->fw_fp = fp; if (fp->datasize < sizeof (struct wpi_firmware_hdr)) { device_printf(sc->sc_dev, "firmware file too short: %zu bytes\n", fp->datasize); error = EINVAL; goto fail; } fw->size = fp->datasize; fw->data = (const uint8_t *)fp->data; /* Extract firmware header information. */ hdr = (const struct wpi_firmware_hdr *)fw->data; /* | RUNTIME FIRMWARE | INIT FIRMWARE | BOOT FW | |HDR|<--TEXT-->|<--DATA-->|<--TEXT-->|<--DATA-->|<--TEXT-->| */ fw->main.textsz = le32toh(hdr->rtextsz); fw->main.datasz = le32toh(hdr->rdatasz); fw->init.textsz = le32toh(hdr->itextsz); fw->init.datasz = le32toh(hdr->idatasz); fw->boot.textsz = le32toh(hdr->btextsz); fw->boot.datasz = 0; /* Sanity-check firmware header. */ if (fw->main.textsz > WPI_FW_TEXT_MAXSZ || fw->main.datasz > WPI_FW_DATA_MAXSZ || fw->init.textsz > WPI_FW_TEXT_MAXSZ || fw->init.datasz > WPI_FW_DATA_MAXSZ || fw->boot.textsz > WPI_FW_BOOT_TEXT_MAXSZ || (fw->boot.textsz & 3) != 0) { device_printf(sc->sc_dev, "invalid firmware header\n"); error = EINVAL; goto fail; } /* Check that all firmware sections fit. */ if (fw->size < sizeof (*hdr) + fw->main.textsz + fw->main.datasz + fw->init.textsz + fw->init.datasz + fw->boot.textsz) { device_printf(sc->sc_dev, "firmware file too short: %zu bytes\n", fw->size); error = EINVAL; goto fail; } /* Get pointers to firmware sections. */ fw->main.text = (const uint8_t *)(hdr + 1); fw->main.data = fw->main.text + fw->main.textsz; fw->init.text = fw->main.data + fw->main.datasz; fw->init.data = fw->init.text + fw->init.textsz; fw->boot.text = fw->init.data + fw->init.datasz; DPRINTF(sc, WPI_DEBUG_FIRMWARE, "Firmware Version: Major %d, Minor %d, Driver %d, \n" "runtime (text: %u, data: %u) init (text: %u, data %u) " "boot (text %u)\n", hdr->major, hdr->minor, le32toh(hdr->driver), fw->main.textsz, fw->main.datasz, fw->init.textsz, fw->init.datasz, fw->boot.textsz); DPRINTF(sc, WPI_DEBUG_FIRMWARE, "fw->main.text %p\n", fw->main.text); DPRINTF(sc, WPI_DEBUG_FIRMWARE, "fw->main.data %p\n", fw->main.data); DPRINTF(sc, WPI_DEBUG_FIRMWARE, "fw->init.text %p\n", fw->init.text); DPRINTF(sc, WPI_DEBUG_FIRMWARE, "fw->init.data %p\n", fw->init.data); DPRINTF(sc, WPI_DEBUG_FIRMWARE, "fw->boot.text %p\n", fw->boot.text); return 0; fail: wpi_unload_firmware(sc); return error; } /** * Free the referenced firmware image */ static void wpi_unload_firmware(struct wpi_softc *sc) { if (sc->fw_fp != NULL) { firmware_put(sc->fw_fp, FIRMWARE_UNLOAD); sc->fw_fp = NULL; } } static int wpi_clock_wait(struct wpi_softc *sc) { int ntries; /* Set "initialization complete" bit. */ WPI_SETBITS(sc, WPI_GP_CNTRL, WPI_GP_CNTRL_INIT_DONE); /* Wait for clock stabilization. */ for (ntries = 0; ntries < 2500; ntries++) { if (WPI_READ(sc, WPI_GP_CNTRL) & WPI_GP_CNTRL_MAC_CLOCK_READY) return 0; DELAY(100); } device_printf(sc->sc_dev, "%s: timeout waiting for clock stabilization\n", __func__); return ETIMEDOUT; } static int wpi_apm_init(struct wpi_softc *sc) { uint32_t reg; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); /* Disable L0s exit timer (NMI bug workaround). */ WPI_SETBITS(sc, WPI_GIO_CHICKEN, WPI_GIO_CHICKEN_DIS_L0S_TIMER); /* Don't wait for ICH L0s (ICH bug workaround). */ WPI_SETBITS(sc, WPI_GIO_CHICKEN, WPI_GIO_CHICKEN_L1A_NO_L0S_RX); /* Set FH wait threshold to max (HW bug under stress workaround). */ WPI_SETBITS(sc, WPI_DBG_HPET_MEM, 0xffff0000); /* Retrieve PCIe Active State Power Management (ASPM). */ reg = pci_read_config(sc->sc_dev, sc->sc_cap_off + 0x10, 1); /* Workaround for HW instability in PCIe L0->L0s->L1 transition. */ if (reg & 0x02) /* L1 Entry enabled. */ WPI_SETBITS(sc, WPI_GIO, WPI_GIO_L0S_ENA); else WPI_CLRBITS(sc, WPI_GIO, WPI_GIO_L0S_ENA); WPI_SETBITS(sc, WPI_ANA_PLL, WPI_ANA_PLL_INIT); /* Wait for clock stabilization before accessing prph. */ if ((error = wpi_clock_wait(sc)) != 0) return error; if ((error = wpi_nic_lock(sc)) != 0) return error; /* Cleanup. */ wpi_prph_write(sc, WPI_APMG_CLK_DIS, 0x00000400); wpi_prph_clrbits(sc, WPI_APMG_PS, 0x00000200); /* Enable DMA and BSM (Bootstrap State Machine). */ wpi_prph_write(sc, WPI_APMG_CLK_EN, WPI_APMG_CLK_CTRL_DMA_CLK_RQT | WPI_APMG_CLK_CTRL_BSM_CLK_RQT); DELAY(20); /* Disable L1-Active. */ wpi_prph_setbits(sc, WPI_APMG_PCI_STT, WPI_APMG_PCI_STT_L1A_DIS); wpi_nic_unlock(sc); return 0; } static void wpi_apm_stop_master(struct wpi_softc *sc) { int ntries; /* Stop busmaster DMA activity. */ WPI_SETBITS(sc, WPI_RESET, WPI_RESET_STOP_MASTER); if ((WPI_READ(sc, WPI_GP_CNTRL) & WPI_GP_CNTRL_PS_MASK) == WPI_GP_CNTRL_MAC_PS) return; /* Already asleep. */ for (ntries = 0; ntries < 100; ntries++) { if (WPI_READ(sc, WPI_RESET) & WPI_RESET_MASTER_DISABLED) return; DELAY(10); } device_printf(sc->sc_dev, "%s: timeout waiting for master\n", __func__); } static void wpi_apm_stop(struct wpi_softc *sc) { wpi_apm_stop_master(sc); /* Reset the entire device. */ WPI_SETBITS(sc, WPI_RESET, WPI_RESET_SW); DELAY(10); /* Clear "initialization complete" bit. */ WPI_CLRBITS(sc, WPI_GP_CNTRL, WPI_GP_CNTRL_INIT_DONE); } static void wpi_nic_config(struct wpi_softc *sc) { uint32_t rev; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); /* voodoo from the Linux "driver".. */ rev = pci_read_config(sc->sc_dev, PCIR_REVID, 1); if ((rev & 0xc0) == 0x40) WPI_SETBITS(sc, WPI_HW_IF_CONFIG, WPI_HW_IF_CONFIG_ALM_MB); else if (!(rev & 0x80)) WPI_SETBITS(sc, WPI_HW_IF_CONFIG, WPI_HW_IF_CONFIG_ALM_MM); if (sc->cap == 0x80) WPI_SETBITS(sc, WPI_HW_IF_CONFIG, WPI_HW_IF_CONFIG_SKU_MRC); if ((sc->rev & 0xf0) == 0xd0) WPI_SETBITS(sc, WPI_HW_IF_CONFIG, WPI_HW_IF_CONFIG_REV_D); else WPI_CLRBITS(sc, WPI_HW_IF_CONFIG, WPI_HW_IF_CONFIG_REV_D); if (sc->type > 1) WPI_SETBITS(sc, WPI_HW_IF_CONFIG, WPI_HW_IF_CONFIG_TYPE_B); } static int wpi_hw_init(struct wpi_softc *sc) { int chnl, ntries, error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); /* Clear pending interrupts. */ WPI_WRITE(sc, WPI_INT, 0xffffffff); if ((error = wpi_apm_init(sc)) != 0) { device_printf(sc->sc_dev, "%s: could not power ON adapter, error %d\n", __func__, error); return error; } /* Select VMAIN power source. */ if ((error = wpi_nic_lock(sc)) != 0) return error; wpi_prph_clrbits(sc, WPI_APMG_PS, WPI_APMG_PS_PWR_SRC_MASK); wpi_nic_unlock(sc); /* Spin until VMAIN gets selected. */ for (ntries = 0; ntries < 5000; ntries++) { if (WPI_READ(sc, WPI_GPIO_IN) & WPI_GPIO_IN_VMAIN) break; DELAY(10); } if (ntries == 5000) { device_printf(sc->sc_dev, "timeout selecting power source\n"); return ETIMEDOUT; } /* Perform adapter initialization. */ wpi_nic_config(sc); /* Initialize RX ring. */ if ((error = wpi_nic_lock(sc)) != 0) return error; /* Set physical address of RX ring. */ WPI_WRITE(sc, WPI_FH_RX_BASE, sc->rxq.desc_dma.paddr); /* Set physical address of RX read pointer. */ WPI_WRITE(sc, WPI_FH_RX_RPTR_ADDR, sc->shared_dma.paddr + offsetof(struct wpi_shared, next)); WPI_WRITE(sc, WPI_FH_RX_WPTR, 0); /* Enable RX. */ WPI_WRITE(sc, WPI_FH_RX_CONFIG, WPI_FH_RX_CONFIG_DMA_ENA | WPI_FH_RX_CONFIG_RDRBD_ENA | WPI_FH_RX_CONFIG_WRSTATUS_ENA | WPI_FH_RX_CONFIG_MAXFRAG | WPI_FH_RX_CONFIG_NRBD(WPI_RX_RING_COUNT_LOG) | WPI_FH_RX_CONFIG_IRQ_DST_HOST | WPI_FH_RX_CONFIG_IRQ_TIMEOUT(1)); (void)WPI_READ(sc, WPI_FH_RSSR_TBL); /* barrier */ wpi_nic_unlock(sc); WPI_WRITE(sc, WPI_FH_RX_WPTR, (WPI_RX_RING_COUNT - 1) & ~7); /* Initialize TX rings. */ if ((error = wpi_nic_lock(sc)) != 0) return error; wpi_prph_write(sc, WPI_ALM_SCHED_MODE, 2); /* bypass mode */ wpi_prph_write(sc, WPI_ALM_SCHED_ARASTAT, 1); /* enable RA0 */ /* Enable all 6 TX rings. */ wpi_prph_write(sc, WPI_ALM_SCHED_TXFACT, 0x3f); wpi_prph_write(sc, WPI_ALM_SCHED_SBYPASS_MODE1, 0x10000); wpi_prph_write(sc, WPI_ALM_SCHED_SBYPASS_MODE2, 0x30002); wpi_prph_write(sc, WPI_ALM_SCHED_TXF4MF, 4); wpi_prph_write(sc, WPI_ALM_SCHED_TXF5MF, 5); /* Set physical address of TX rings. */ WPI_WRITE(sc, WPI_FH_TX_BASE, sc->shared_dma.paddr); WPI_WRITE(sc, WPI_FH_MSG_CONFIG, 0xffff05a5); /* Enable all DMA channels. */ for (chnl = 0; chnl < WPI_NDMACHNLS; chnl++) { WPI_WRITE(sc, WPI_FH_CBBC_CTRL(chnl), 0); WPI_WRITE(sc, WPI_FH_CBBC_BASE(chnl), 0); WPI_WRITE(sc, WPI_FH_TX_CONFIG(chnl), 0x80200008); } wpi_nic_unlock(sc); (void)WPI_READ(sc, WPI_FH_TX_BASE); /* barrier */ /* Clear "radio off" and "commands blocked" bits. */ WPI_WRITE(sc, WPI_UCODE_GP1_CLR, WPI_UCODE_GP1_RFKILL); WPI_WRITE(sc, WPI_UCODE_GP1_CLR, WPI_UCODE_GP1_CMD_BLOCKED); /* Clear pending interrupts. */ WPI_WRITE(sc, WPI_INT, 0xffffffff); /* Enable interrupts. */ WPI_WRITE(sc, WPI_INT_MASK, WPI_INT_MASK_DEF); /* _Really_ make sure "radio off" bit is cleared! */ WPI_WRITE(sc, WPI_UCODE_GP1_CLR, WPI_UCODE_GP1_RFKILL); WPI_WRITE(sc, WPI_UCODE_GP1_CLR, WPI_UCODE_GP1_RFKILL); if ((error = wpi_load_firmware(sc)) != 0) { device_printf(sc->sc_dev, "%s: could not load firmware, error %d\n", __func__, error); return error; } /* Wait at most one second for firmware alive notification. */ if ((error = mtx_sleep(sc, &sc->sc_mtx, PCATCH, "wpiinit", hz)) != 0) { device_printf(sc->sc_dev, "%s: timeout waiting for adapter to initialize, error %d\n", __func__, error); return error; } DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); /* Do post-firmware initialization. */ return wpi_post_alive(sc); } static void wpi_hw_stop(struct wpi_softc *sc) { int chnl, qid, ntries; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); if (WPI_READ(sc, WPI_UCODE_GP1) & WPI_UCODE_GP1_MAC_SLEEP) wpi_nic_lock(sc); WPI_WRITE(sc, WPI_RESET, WPI_RESET_NEVO); /* Disable interrupts. */ WPI_WRITE(sc, WPI_INT_MASK, 0); WPI_WRITE(sc, WPI_INT, 0xffffffff); WPI_WRITE(sc, WPI_FH_INT, 0xffffffff); /* Make sure we no longer hold the NIC lock. */ wpi_nic_unlock(sc); if (wpi_nic_lock(sc) == 0) { /* Stop TX scheduler. */ wpi_prph_write(sc, WPI_ALM_SCHED_MODE, 0); wpi_prph_write(sc, WPI_ALM_SCHED_TXFACT, 0); /* Stop all DMA channels. */ for (chnl = 0; chnl < WPI_NDMACHNLS; chnl++) { WPI_WRITE(sc, WPI_FH_TX_CONFIG(chnl), 0); for (ntries = 0; ntries < 200; ntries++) { if (WPI_READ(sc, WPI_FH_TX_STATUS) & WPI_FH_TX_STATUS_IDLE(chnl)) break; DELAY(10); } } wpi_nic_unlock(sc); } /* Stop RX ring. */ wpi_reset_rx_ring(sc); /* Reset all TX rings. */ for (qid = 0; qid < WPI_NTXQUEUES; qid++) wpi_reset_tx_ring(sc, &sc->txq[qid]); if (wpi_nic_lock(sc) == 0) { wpi_prph_write(sc, WPI_APMG_CLK_DIS, WPI_APMG_CLK_CTRL_DMA_CLK_RQT); wpi_nic_unlock(sc); } DELAY(5); /* Power OFF adapter. */ wpi_apm_stop(sc); } static void wpi_radio_on(void *arg0, int pending) { struct wpi_softc *sc = arg0; struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); device_printf(sc->sc_dev, "RF switch: radio enabled\n"); if (vap != NULL) { wpi_init(sc); ieee80211_init(vap); } if (WPI_READ(sc, WPI_GP_CNTRL) & WPI_GP_CNTRL_RFKILL) { WPI_LOCK(sc); callout_stop(&sc->watchdog_rfkill); WPI_UNLOCK(sc); } } static void wpi_radio_off(void *arg0, int pending) { struct wpi_softc *sc = arg0; struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); device_printf(sc->sc_dev, "RF switch: radio disabled\n"); wpi_stop(sc); if (vap != NULL) ieee80211_stop(vap); WPI_LOCK(sc); callout_reset(&sc->watchdog_rfkill, hz, wpi_watchdog_rfkill, sc); WPI_UNLOCK(sc); } static void wpi_init(void *arg) { struct wpi_softc *sc = arg; struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; int error; WPI_LOCK(sc); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_BEGIN, __func__); if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) goto end; /* Check that the radio is not disabled by hardware switch. */ if (!(WPI_READ(sc, WPI_GP_CNTRL) & WPI_GP_CNTRL_RFKILL)) { device_printf(sc->sc_dev, "RF switch: radio disabled (%s)\n", __func__); callout_reset(&sc->watchdog_rfkill, hz, wpi_watchdog_rfkill, sc); goto end; } /* Read firmware images from the filesystem. */ if ((error = wpi_read_firmware(sc)) != 0) { device_printf(sc->sc_dev, "%s: could not read firmware, error %d\n", __func__, error); goto fail; } /* Initialize hardware and upload firmware. */ error = wpi_hw_init(sc); wpi_unload_firmware(sc); if (error != 0) { device_printf(sc->sc_dev, "%s: could not initialize hardware, error %d\n", __func__, error); goto fail; } /* Configure adapter now that it is ready. */ sc->txq_active = 1; if ((error = wpi_config(sc)) != 0) { device_printf(sc->sc_dev, "%s: could not configure device, error %d\n", __func__, error); goto fail; } IF_LOCK(&ifp->if_snd); ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; ifp->if_drv_flags |= IFF_DRV_RUNNING; IF_UNLOCK(&ifp->if_snd); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END, __func__); WPI_UNLOCK(sc); ieee80211_start_all(ic); return; fail: wpi_stop_locked(sc); end: DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_END_ERR, __func__); WPI_UNLOCK(sc); } static void wpi_stop_locked(struct wpi_softc *sc) { struct ifnet *ifp = sc->sc_ifp; WPI_LOCK_ASSERT(sc); WPI_TXQ_LOCK(sc); sc->txq_active = 0; WPI_TXQ_UNLOCK(sc); WPI_TXQ_STATE_LOCK(sc); callout_stop(&sc->tx_timeout); WPI_TXQ_STATE_UNLOCK(sc); WPI_RXON_LOCK(sc); callout_stop(&sc->scan_timeout); callout_stop(&sc->calib_to); WPI_RXON_UNLOCK(sc); IF_LOCK(&ifp->if_snd); ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); IF_UNLOCK(&ifp->if_snd); /* Power OFF hardware. */ wpi_hw_stop(sc); } static void wpi_stop(struct wpi_softc *sc) { WPI_LOCK(sc); wpi_stop_locked(sc); WPI_UNLOCK(sc); } /* * Callback from net80211 to start a scan. */ static void wpi_scan_start(struct ieee80211com *ic) { struct wpi_softc *sc = ic->ic_ifp->if_softc; wpi_set_led(sc, WPI_LED_LINK, 20, 2); } /* * Callback from net80211 to terminate a scan. */ static void wpi_scan_end(struct ieee80211com *ic) { struct ifnet *ifp = ic->ic_ifp; struct wpi_softc *sc = ifp->if_softc; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); if (vap->iv_state == IEEE80211_S_RUN) wpi_set_led(sc, WPI_LED_LINK, 0, 1); } /** * Called by the net80211 framework to indicate to the driver * that the channel should be changed */ static void wpi_set_channel(struct ieee80211com *ic) { const struct ieee80211_channel *c = ic->ic_curchan; struct ifnet *ifp = ic->ic_ifp; struct wpi_softc *sc = ifp->if_softc; int error; DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); WPI_LOCK(sc); sc->sc_rxtap.wr_chan_freq = htole16(c->ic_freq); sc->sc_rxtap.wr_chan_flags = htole16(c->ic_flags); WPI_UNLOCK(sc); WPI_TX_LOCK(sc); sc->sc_txtap.wt_chan_freq = htole16(c->ic_freq); sc->sc_txtap.wt_chan_flags = htole16(c->ic_flags); WPI_TX_UNLOCK(sc); /* * Only need to set the channel in Monitor mode. AP scanning and auth * are already taken care of by their respective firmware commands. */ if (ic->ic_opmode == IEEE80211_M_MONITOR) { WPI_RXON_LOCK(sc); sc->rxon.chan = ieee80211_chan2ieee(ic, c); if (IEEE80211_IS_CHAN_2GHZ(c)) { sc->rxon.flags |= htole32(WPI_RXON_AUTO | WPI_RXON_24GHZ); } else { sc->rxon.flags &= ~htole32(WPI_RXON_AUTO | WPI_RXON_24GHZ); } if ((error = wpi_send_rxon(sc, 0, 1)) != 0) device_printf(sc->sc_dev, "%s: error %d setting channel\n", __func__, error); WPI_RXON_UNLOCK(sc); } } /** * Called by net80211 to indicate that we need to scan the current * channel. The channel is previously be set via the wpi_set_channel * callback. */ static void wpi_scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell) { struct ieee80211vap *vap = ss->ss_vap; struct ieee80211com *ic = vap->iv_ic; struct wpi_softc *sc = ic->ic_ifp->if_softc; int error; WPI_RXON_LOCK(sc); - if (sc->rxon.chan != ieee80211_chan2ieee(ic, ic->ic_curchan)) { - error = wpi_scan(sc, ic->ic_curchan); - WPI_RXON_UNLOCK(sc); - if (error != 0) - ieee80211_cancel_scan(vap); - } else { - WPI_RXON_UNLOCK(sc); - /* Send probe request when associated. */ - sc->sc_scan_curchan(ss, maxdwell); - } + error = wpi_scan(sc, ic->ic_curchan); + WPI_RXON_UNLOCK(sc); + if (error != 0) + ieee80211_cancel_scan(vap); } /** * Called by the net80211 framework to indicate * the minimum dwell time has been met, terminate the scan. * We don't actually terminate the scan as the firmware will notify * us when it's finished and we have no way to interrupt it. */ static void wpi_scan_mindwell(struct ieee80211_scan_state *ss) { /* NB: don't try to abort scan; wait for firmware to finish */ } static void wpi_hw_reset(void *arg, int pending) { struct wpi_softc *sc = arg; struct ifnet *ifp = sc->sc_ifp; struct ieee80211com *ic = ifp->if_l2com; struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); DPRINTF(sc, WPI_DEBUG_TRACE, TRACE_STR_DOING, __func__); if (vap != NULL && (ic->ic_flags & IEEE80211_F_SCAN)) ieee80211_cancel_scan(vap); wpi_stop(sc); if (vap != NULL) ieee80211_stop(vap); wpi_init(sc); if (vap != NULL) ieee80211_init(vap); } Index: head/sys/dev/wpi/if_wpivar.h =================================================================== --- head/sys/dev/wpi/if_wpivar.h (revision 282375) +++ head/sys/dev/wpi/if_wpivar.h (revision 282376) @@ -1,292 +1,290 @@ /* $FreeBSD$ */ /*- * Copyright (c) 2006,2007 * Damien Bergamini * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ struct wpi_rx_radiotap_header { struct ieee80211_radiotap_header wr_ihdr; uint64_t wr_tsft; uint8_t wr_flags; uint8_t wr_rate; uint16_t wr_chan_freq; uint16_t wr_chan_flags; int8_t wr_dbm_antsignal; int8_t wr_dbm_antnoise; uint8_t wr_antenna; } __packed; #define WPI_RX_RADIOTAP_PRESENT \ ((1 << IEEE80211_RADIOTAP_TSFT) | \ (1 << IEEE80211_RADIOTAP_FLAGS) | \ (1 << IEEE80211_RADIOTAP_RATE) | \ (1 << IEEE80211_RADIOTAP_CHANNEL) | \ (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | \ (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | \ (1 << IEEE80211_RADIOTAP_ANTENNA)) struct wpi_tx_radiotap_header { struct ieee80211_radiotap_header wt_ihdr; uint8_t wt_flags; uint8_t wt_rate; uint16_t wt_chan_freq; uint16_t wt_chan_flags; } __packed; #define WPI_TX_RADIOTAP_PRESENT \ ((1 << IEEE80211_RADIOTAP_FLAGS) | \ (1 << IEEE80211_RADIOTAP_RATE) | \ (1 << IEEE80211_RADIOTAP_CHANNEL)) struct wpi_dma_info { bus_dma_tag_t tag; bus_dmamap_t map; bus_addr_t paddr; caddr_t vaddr; bus_size_t size; }; struct wpi_tx_data { bus_dmamap_t map; bus_addr_t cmd_paddr; struct mbuf *m; struct ieee80211_node *ni; }; struct wpi_tx_ring { struct wpi_dma_info desc_dma; struct wpi_dma_info cmd_dma; struct wpi_tx_desc *desc; struct wpi_tx_cmd *cmd; struct wpi_tx_data data[WPI_TX_RING_COUNT]; bus_dma_tag_t data_dmat; int qid; int queued; int cur; int update; }; struct wpi_rx_data { struct mbuf *m; bus_dmamap_t map; }; struct wpi_rx_ring { struct wpi_dma_info desc_dma; uint32_t *desc; struct wpi_rx_data data[WPI_RX_RING_COUNT]; bus_dma_tag_t data_dmat; int cur; int update; }; struct wpi_node { struct ieee80211_node ni; /* must be the first */ uint8_t id; }; #define WPI_NODE(ni) ((struct wpi_node *)(ni)) struct wpi_power_sample { uint8_t index; int8_t power; }; struct wpi_power_group { #define WPI_SAMPLES_COUNT 5 struct wpi_power_sample samples[WPI_SAMPLES_COUNT]; uint8_t chan; int8_t maxpwr; int16_t temp; }; struct wpi_buf { uint8_t data[56]; /* sizeof(struct wpi_cmd_beacon) */ struct ieee80211_node *ni; struct mbuf *m; size_t size; int code; int ac; }; struct wpi_vap { struct ieee80211vap wv_vap; struct wpi_buf wv_bcbuf; struct ieee80211_beacon_offsets wv_boff; struct mtx wv_mtx; uint32_t wv_gtk; #define WPI_VAP_KEY(kid) (1 << kid) int (*wv_newstate)(struct ieee80211vap *, enum ieee80211_state, int); }; #define WPI_VAP(vap) ((struct wpi_vap *)(vap)) #define WPI_VAP_LOCK_INIT(_wvp) \ mtx_init(&(_wvp)->wv_mtx, "lock for wv_bcbuf/wv_boff structures", \ NULL, MTX_DEF) #define WPI_VAP_LOCK(_wvp) mtx_lock(&(_wvp)->wv_mtx) #define WPI_VAP_UNLOCK(_wvp) mtx_unlock(&(_wvp)->wv_mtx) #define WPI_VAP_LOCK_ASSERT(_wvp) mtx_assert(&(_wvp)->wv_mtx, MA_OWNED) #define WPI_VAP_LOCK_DESTROY(_wvp) mtx_destroy(&(_wvp)->wv_mtx) struct wpi_fw_part { const uint8_t *text; uint32_t textsz; const uint8_t *data; uint32_t datasz; }; struct wpi_fw_info { const uint8_t *data; size_t size; struct wpi_fw_part init; struct wpi_fw_part main; struct wpi_fw_part boot; }; struct wpi_softc { device_t sc_dev; struct ifnet *sc_ifp; int sc_debug; struct mtx sc_mtx; struct mtx tx_mtx; /* Shared area. */ struct wpi_dma_info shared_dma; struct wpi_shared *shared; struct wpi_tx_ring txq[WPI_NTXQUEUES]; struct mtx txq_mtx; struct mtx txq_state_mtx; uint32_t txq_active; struct wpi_rx_ring rxq; /* TX Thermal Callibration. */ struct callout calib_to; int calib_cnt; struct callout scan_timeout; struct callout tx_timeout; /* Watch dog timer. */ struct callout watchdog_rfkill; /* Firmware image. */ struct wpi_fw_info fw; uint32_t errptr; struct resource *irq; struct resource *mem; bus_space_tag_t sc_st; bus_space_handle_t sc_sh; void *sc_ih; bus_size_t sc_sz; int sc_cap_off; /* PCIe Capabilities. */ struct wpi_rxon rxon; struct mtx rxon_mtx; int temp; uint32_t qfullmsk; uint32_t nodesmsk; struct mtx nt_mtx; void (*sc_node_free)(struct ieee80211_node *); - void (*sc_scan_curchan)(struct ieee80211_scan_state *, - unsigned long); struct wpi_rx_radiotap_header sc_rxtap; struct wpi_tx_radiotap_header sc_txtap; /* Firmware image. */ const struct firmware *fw_fp; /* Firmware DMA transfer. */ struct wpi_dma_info fw_dma; /* Tasks used by the driver. */ struct task sc_reinittask; struct task sc_radiooff_task; struct task sc_radioon_task; struct task sc_start_task; /* Taskqueue */ struct taskqueue *sc_tq; /* Eeprom info. */ uint8_t cap; uint16_t rev; uint8_t type; struct wpi_eeprom_chan eeprom_channels[WPI_CHAN_BANDS_COUNT][WPI_MAX_CHAN_PER_BAND]; struct wpi_power_group groups[WPI_POWER_GROUPS_COUNT]; int8_t maxpwr[IEEE80211_CHAN_MAX]; char domain[4]; /* Regulatory domain. */ }; /* * Locking order: * 1. WPI_LOCK; * 2. WPI_RXON_LOCK; * 3. WPI_TX_LOCK; * 4. WPI_NT_LOCK / WPI_VAP_LOCK; * 5. WPI_TXQ_LOCK; * 6. WPI_TXQ_STATE_LOCK; */ #define WPI_LOCK_INIT(_sc) \ mtx_init(&(_sc)->sc_mtx, device_get_nameunit((_sc)->sc_dev), \ MTX_NETWORK_LOCK, MTX_DEF) #define WPI_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx) #define WPI_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx) #define WPI_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->sc_mtx, MA_OWNED) #define WPI_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx) #define WPI_RXON_LOCK_INIT(_sc) \ mtx_init(&(_sc)->rxon_mtx, "lock for wpi_rxon structure", NULL, MTX_DEF) #define WPI_RXON_LOCK(_sc) mtx_lock(&(_sc)->rxon_mtx) #define WPI_RXON_UNLOCK(_sc) mtx_unlock(&(_sc)->rxon_mtx) #define WPI_RXON_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->rxon_mtx, MA_OWNED) #define WPI_RXON_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->rxon_mtx) #define WPI_TX_LOCK_INIT(_sc) \ mtx_init(&(_sc)->tx_mtx, "tx path lock", NULL, MTX_DEF) #define WPI_TX_LOCK(_sc) mtx_lock(&(_sc)->tx_mtx) #define WPI_TX_UNLOCK(_sc) mtx_unlock(&(_sc)->tx_mtx) #define WPI_TX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->tx_mtx) #define WPI_NT_LOCK_INIT(_sc) \ mtx_init(&(_sc)->nt_mtx, "node table lock", NULL, MTX_DEF) #define WPI_NT_LOCK(_sc) mtx_lock(&(_sc)->nt_mtx) #define WPI_NT_UNLOCK(_sc) mtx_unlock(&(_sc)->nt_mtx) #define WPI_NT_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->nt_mtx) #define WPI_TXQ_LOCK_INIT(_sc) \ mtx_init(&(_sc)->txq_mtx, "txq/cmdq lock", NULL, MTX_DEF) #define WPI_TXQ_LOCK(_sc) mtx_lock(&(_sc)->txq_mtx) #define WPI_TXQ_UNLOCK(_sc) mtx_unlock(&(_sc)->txq_mtx) #define WPI_TXQ_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->txq_mtx) #define WPI_TXQ_STATE_LOCK_INIT(_sc) \ mtx_init(&(_sc)->txq_state_mtx, "txq state lock", NULL, MTX_DEF) #define WPI_TXQ_STATE_LOCK(_sc) mtx_lock(&(_sc)->txq_state_mtx) #define WPI_TXQ_STATE_UNLOCK(_sc) mtx_unlock(&(_sc)->txq_state_mtx) #define WPI_TXQ_STATE_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->txq_state_mtx)