Index: stable/10/sbin/camcontrol/camcontrol.8 =================================================================== --- stable/10/sbin/camcontrol/camcontrol.8 (revision 280678) +++ stable/10/sbin/camcontrol/camcontrol.8 (revision 280679) @@ -1,2081 +1,2104 @@ .\" .\" Copyright (c) 1998, 1999, 2000, 2002, 2005, 2006, 2007 Kenneth D. Merry. .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" $FreeBSD$ .\" -.Dd August 31, 2014 +.Dd March 19, 2015 .Dt CAMCONTROL 8 .Os .Sh NAME .Nm camcontrol .Nd CAM control program .Sh SYNOPSIS .Nm .Aq Ar command .Op device id .Op generic args .Op command args .Nm .Ic devlist .Op Fl b .Op Fl v .Nm .Ic periphlist .Op device id .Op Fl n Ar dev_name .Op Fl u Ar unit_number .Nm .Ic tur .Op device id .Op generic args .Nm .Ic inquiry .Op device id .Op generic args .Op Fl D .Op Fl S .Op Fl R .Nm .Ic identify .Op device id .Op generic args .Op Fl v .Nm .Ic reportluns .Op device id .Op generic args .Op Fl c .Op Fl l .Op Fl r Ar reporttype .Nm .Ic readcap .Op device id .Op generic args .Op Fl b .Op Fl h .Op Fl H .Op Fl N .Op Fl q .Op Fl s .Nm .Ic start .Op device id .Op generic args .Nm .Ic stop .Op device id .Op generic args .Nm .Ic load .Op device id .Op generic args .Nm .Ic eject .Op device id .Op generic args .Nm .Ic rescan .Aq all | bus Ns Op :target:lun .Nm .Ic reset .Aq all | bus Ns Op :target:lun .Nm .Ic defects .Op device id .Op generic args .Aq Fl f Ar format .Op Fl P .Op Fl G .Op Fl q .Op Fl s .Op Fl S Ar offset .Op Fl X .Nm .Ic modepage .Op device id .Op generic args .Aq Fl m Ar page | Fl l .Op Fl P Ar pgctl .Op Fl b | Fl e .Op Fl d .Nm .Ic cmd .Op device id .Op generic args .Aq Fl a Ar cmd Op args .Aq Fl c Ar cmd Op args .Op Fl d .Op Fl f .Op Fl i Ar len Ar fmt .Bk -words .Op Fl o Ar len Ar fmt Op args .Op Fl r Ar fmt .Ek .Nm .Ic smpcmd .Op device id .Op generic args .Aq Fl r Ar len Ar fmt Op args .Aq Fl R Ar len Ar fmt Op args .Nm .Ic smprg .Op device id .Op generic args .Op Fl l .Nm .Ic smppc .Op device id .Op generic args .Aq Fl p Ar phy .Op Fl l .Op Fl o Ar operation .Op Fl d Ar name .Op Fl m Ar rate .Op Fl M Ar rate .Op Fl T Ar pp_timeout .Op Fl a Ar enable|disable .Op Fl A Ar enable|disable .Op Fl s Ar enable|disable .Op Fl S Ar enable|disable .Nm .Ic smpphylist .Op device id .Op generic args .Op Fl l .Op Fl q .Nm .Ic smpmaninfo .Op device id .Op generic args .Op Fl l .Nm .Ic debug .Op Fl I .Op Fl P .Op Fl T .Op Fl S .Op Fl X .Op Fl c .Op Fl p .Aq all|off|bus Ns Op :target Ns Op :lun .Nm .Ic tags .Op device id .Op generic args .Op Fl N Ar tags .Op Fl q .Op Fl v .Nm .Ic negotiate .Op device id .Op generic args .Op Fl c .Op Fl D Ar enable|disable .Op Fl M Ar mode .Op Fl O Ar offset .Op Fl q .Op Fl R Ar syncrate .Op Fl T Ar enable|disable .Op Fl U .Op Fl W Ar bus_width .Op Fl v .Nm .Ic format .Op device id .Op generic args .Op Fl q .Op Fl r .Op Fl w .Op Fl y .Nm .Ic sanitize .Op device id .Op generic args .Aq Fl a Ar overwrite | block | crypto | exitfailure .Op Fl c Ar passes .Op Fl I .Op Fl P Ar pattern .Op Fl q .Op Fl U .Op Fl r .Op Fl w .Op Fl y .Nm .Ic idle .Op device id .Op generic args .Op Fl t Ar time .Nm .Ic standby .Op device id .Op generic args .Op Fl t Ar time .Nm .Ic sleep .Op device id .Op generic args .Nm +.Ic apm +.Op device id +.Op generic args +.Op Fl l Ar level +.Nm +.Ic aam +.Op device id +.Op generic args +.Op Fl l Ar level +.Nm .Ic fwdownload .Op device id .Op generic args .Aq Fl f Ar fw_image .Op Fl y .Op Fl s .Nm .Ic security .Op device id .Op generic args .Op Fl d Ar pwd .Op Fl e Ar pwd .Op Fl f .Op Fl h Ar pwd .Op Fl k Ar pwd .Op Fl l Ar high|maximum .Op Fl q .Op Fl s Ar pwd .Op Fl T Ar timeout .Op Fl U Ar user|master .Op Fl y .Nm .Ic hpa .Op device id .Op generic args .Op Fl f .Op Fl l .Op Fl P .Op Fl p Ar pwd .Op Fl q .Op Fl s Ar max_sectors .Op Fl U Ar pwd .Op Fl y .Nm .Ic persist .Op device id .Op generic args .Aq Fl i Ar action | Fl o Ar action .Op Fl a .Op Fl I Ar trans_id .Op Fl k Ar key .Op Fl K Ar sa_key .Op Fl p .Op Fl R Ar rel_tgt_port .Op Fl s Ar scope .Op Fl S .Op Fl T Ar res_type .Op Fl U .Nm .Ic help .Sh DESCRIPTION The .Nm utility is designed to provide a way for users to access and control the .Fx CAM subsystem. .Pp The .Nm utility can cause a loss of data and/or system crashes if used improperly. Even expert users are encouraged to exercise caution when using this command. Novice users should stay away from this utility. .Pp The .Nm utility has a number of primary functions, many of which support an optional device identifier. A device identifier can take one of three forms: .Bl -tag -width 14n .It deviceUNIT Specify a device name and unit number combination, like "da5" or "cd3". .It bus:target Specify a bus number and target id. The bus number can be determined from the output of .Dq camcontrol devlist . The lun defaults to 0. .It bus:target:lun Specify the bus, target and lun for a device. (e.g.\& 1:2:0) .El .Pp The device identifier, if it is specified, .Em must come immediately after the function name, and before any generic or function-specific arguments. Note that the .Fl n and .Fl u arguments described below will override any device name or unit number specified beforehand. The .Fl n and .Fl u arguments will .Em not override a specified bus:target or bus:target:lun, however. .Pp Most of the .Nm primary functions support these generic arguments: .Bl -tag -width 14n .It Fl C Ar count SCSI command retry count. In order for this to work, error recovery .Pq Fl E must be turned on. .It Fl E Instruct the kernel to perform generic SCSI error recovery for the given command. This is needed in order for the retry count .Pq Fl C to be honored. Other than retrying commands, the generic error recovery in the code will generally attempt to spin up drives that are not spinning. It may take some other actions, depending upon the sense code returned from the command. .It Fl n Ar dev_name Specify the device type to operate on, e.g.\& "da", "cd". .It Fl t Ar timeout SCSI command timeout in seconds. This overrides the default timeout for any given command. .It Fl u Ar unit_number Specify the device unit number, e.g.\& "1", "5". .It Fl v Be verbose, print out sense information for failed SCSI commands. .El .Pp Primary command functions: .Bl -tag -width periphlist .It Ic devlist List all physical devices (logical units) attached to the CAM subsystem. This also includes a list of peripheral drivers attached to each device. With the .Fl v argument, SCSI bus number, adapter name and unit numbers are printed as well. On the other hand, with the .Fl b argument, only the bus adapter, and unit information will be printed, and device information will be omitted. .It Ic periphlist List all peripheral drivers attached to a given physical device (logical unit). .It Ic tur Send the SCSI test unit ready (0x00) command to the given device. The .Nm utility will report whether the device is ready or not. .It Ic inquiry Send a SCSI inquiry command (0x12) to a device. By default, .Nm will print out the standard inquiry data, device serial number, and transfer rate information. The user can specify that only certain types of inquiry data be printed: .Bl -tag -width 4n .It Fl D Get the standard inquiry data. .It Fl S Print out the serial number. If this flag is the only one specified, .Nm will not print out "Serial Number" before the value returned by the drive. This is to aid in script writing. .It Fl R Print out transfer rate information. .El .It Ic identify Send a ATA identify command (0xec) to a device. .It Ic reportluns Send the SCSI REPORT LUNS (0xA0) command to the given device. By default, .Nm will print out the list of logical units (LUNs) supported by the target device. There are a couple of options to modify the output: .Bl -tag -width 14n .It Fl c Just print out a count of LUNs, not the actual LUN numbers. .It Fl l Just print out the LUNs, and do not print out the count. .It Fl r Ar reporttype Specify the type of report to request from the target: .Bl -tag -width 012345678 .It default Return the default report. This is the .Nm default. Most targets will support this report if they support the REPORT LUNS command. .It wellknown Return only well known LUNs. .It all Return all available LUNs. .El .El .Pp .Nm will try to print out LUN numbers in a reasonable format. It can understand the peripheral, flat, LUN and extended LUN formats. .It Ic readcap Send the SCSI READ CAPACITY command to the given device and display the results. If the device is larger than 2TB, the SCSI READ CAPACITY (16) service action will be sent to obtain the full size of the device. By default, .Nm will print out the last logical block of the device, and the blocksize of the device in bytes. To modify the output format, use the following options: .Bl -tag -width 5n .It Fl b Just print out the blocksize, not the last block or device size. This cannot be used with .Fl N or .Fl s . .It Fl h Print out the device size in human readable (base 2, 1K == 1024) format. This implies .Fl N and cannot be used with .Fl q or .Fl b . .It Fl H Print out the device size in human readable (base 10, 1K == 1000) format. .It Fl N Print out the number of blocks in the device instead of the last logical block. .It Fl q Quiet, print out the numbers only (separated by a comma if .Fl b or .Fl s are not specified). .It Fl s Print out the last logical block or the size of the device only, and omit the blocksize. .El .It Ic start Send the SCSI Start/Stop Unit (0x1B) command to the given device with the start bit set. .It Ic stop Send the SCSI Start/Stop Unit (0x1B) command to the given device with the start bit cleared. .It Ic load Send the SCSI Start/Stop Unit (0x1B) command to the given device with the start bit set and the load/eject bit set. .It Ic eject Send the SCSI Start/Stop Unit (0x1B) command to the given device with the start bit cleared and the load/eject bit set. .It Ic rescan Tell the kernel to scan all busses in the system (with the .Ar all argument), the given bus (XPT_SCAN_BUS), or bus:target:lun (XPT_SCAN_LUN) for new devices or devices that have gone away. The user may specify a scan of all busses, a single bus, or a lun. Scanning all luns on a target is not supported. .It Ic reset Tell the kernel to reset all busses in the system (with the .Ar all argument) or the given bus (XPT_RESET_BUS) by issuing a SCSI bus reset for that bus, or to reset the given bus:target:lun (XPT_RESET_DEV), typically by issuing a BUS DEVICE RESET message after connecting to that device. Note that this can have a destructive impact on the system. .It Ic defects Send the .Tn SCSI READ DEFECT DATA (10) command (0x37) or the .Tn SCSI READ DEFECT DATA (12) command (0xB7) to the given device, and print out any combination of: the total number of defects, the primary defect list (PLIST), and the grown defect list (GLIST). .Bl -tag -width 11n .It Fl f Ar format Specify the requested format of the defect list. The format argument is required. Most drives support the physical sector format. Some drives support the logical block format. Many drives, if they do not support the requested format, return the data in an alternate format, along with sense information indicating that the requested data format is not supported. The .Nm utility attempts to detect this, and print out whatever format the drive returns. If the drive uses a non-standard sense code to report that it does not support the requested format, .Nm will probably see the error as a failure to complete the request. .Pp The format options are: .Bl -tag -width 9n .It block Print out the list as logical blocks. This is limited to 32-bit block sizes, and isn't supported by many modern drives. .It longblock Print out the list as logical blocks. This option uses a 64-bit block size. .It bfi Print out the list in bytes from index format. .It extbfi Print out the list in extended bytes from index format. The extended format allows for ranges of blocks to be printed. .It phys Print out the list in physical sector format. Most drives support this format. .It extphys Print out the list in extended physical sector format. The extended format allows for ranges of blocks to be printed. .El .Pp .It Fl G Print out the grown defect list. This is a list of bad blocks that have been remapped since the disk left the factory. .It Fl P Print out the primary defect list. This is the list of defects that were present in the factory. .It Fl q When printing status information with .Fl s , only print the number of defects. .It Fl s Just print the number of defects, not the list of defects. .It Fl S Ar offset Specify the starting offset into the defect list. This implies using the .Tn SCSI READ DEFECT DATA (12) command, as the 10 byte version of the command doesn't support the address descriptor index field. Not all drives support the 12 byte command, and some drives that support the 12 byte command don't support the address descriptor index field. .It Fl X Print out defects in hexadecimal (base 16) form instead of base 10 form. .El .Pp If neither .Fl P nor .Fl G is specified, .Nm will print out the number of defects given in the READ DEFECT DATA header returned from the drive. Some drives will report 0 defects if neither the primary or grown defect lists are requested. .It Ic modepage Allows the user to display and optionally edit a SCSI mode page. The mode page formats are located in .Pa /usr/share/misc/scsi_modes . This can be overridden by specifying a different file in the .Ev SCSI_MODES environment variable. The .Ic modepage command takes several arguments: .Bl -tag -width 12n .It Fl d Disable block descriptors for mode sense. .It Fl b Displays mode page data in binary format. .It Fl e This flag allows the user to edit values in the mode page. The user may either edit mode page values with the text editor pointed to by his .Ev EDITOR environment variable, or supply mode page values via standard input, using the same format that .Nm uses to display mode page values. The editor will be invoked if .Nm detects that standard input is terminal. .It Fl l Lists all available mode pages. .It Fl m Ar mode_page This specifies the number of the mode page the user would like to view and/or edit. This argument is mandatory unless .Fl l is specified. .It Fl P Ar pgctl This allows the user to specify the page control field. Possible values are: .Bl -tag -width xxx -compact .It 0 Current values .It 1 Changeable values .It 2 Default values .It 3 Saved values .El .El .It Ic cmd Allows the user to send an arbitrary ATA or SCSI CDB to any device. The .Ic cmd function requires the .Fl c argument to specify SCSI CDB or the .Fl a argument to specify ATA Command Block registers values. Other arguments are optional, depending on the command type. The command and data specification syntax is documented in .Xr cam_cdbparse 3 . NOTE: If the CDB specified causes data to be transferred to or from the SCSI device in question, you MUST specify either .Fl i or .Fl o . .Bl -tag -width 17n .It Fl a Ar cmd Op args This specifies the content of 12 ATA Command Block registers (command, features, lba_low, lba_mid, lba_high, device, lba_low_exp, lba_mid_exp. lba_high_exp, features_exp, sector_count, sector_count_exp). .It Fl c Ar cmd Op args This specifies the SCSI CDB. SCSI CDBs may be 6, 10, 12 or 16 bytes. .It Fl d Specifies DMA protocol to be used for ATA command. .It Fl f Specifies FPDMA (NCQ) protocol to be used for ATA command. .It Fl i Ar len Ar fmt This specifies the amount of data to read, and how it should be displayed. If the format is .Sq - , .Ar len bytes of data will be read from the device and written to standard output. .It Fl o Ar len Ar fmt Op args This specifies the amount of data to be written to a device, and the data that is to be written. If the format is .Sq - , .Ar len bytes of data will be read from standard input and written to the device. .It Fl r Ar fmt This specifies that 11 result ATA Command Block registers should be displayed (status, error, lba_low, lba_mid, lba_high, device, lba_low_exp, lba_mid_exp, lba_high_exp, sector_count, sector_count_exp), and how. If the format is .Sq - , 11 result registers will be written to standard output in hex. .El .It Ic smpcmd Allows the user to send an arbitrary Serial Management Protocol (SMP) command to a device. The .Ic smpcmd function requires the .Fl r argument to specify the SMP request to be sent, and the .Fl R argument to specify the format of the SMP response. The syntax for the SMP request and response arguments is documented in .Xr cam_cdbparse 3 . .Pp Note that SAS adapters that support SMP passthrough (at least the currently known adapters) do not accept CRC bytes from the user in the request and do not pass CRC bytes back to the user in the response. Therefore users should not include the CRC bytes in the length of the request and not expect CRC bytes to be returned in the response. .Bl -tag -width 17n .It Fl r Ar len Ar fmt Op args This specifies the size of the SMP request, without the CRC bytes, and the SMP request format. If the format is .Sq - , .Ar len bytes of data will be read from standard input and written as the SMP request. .It Fl R Ar len Ar fmt Op args This specifies the size of the buffer allocated for the SMP response, and the SMP response format. If the format is .Sq - , .Ar len bytes of data will be allocated for the response and the response will be written to standard output. .El .It Ic smprg Allows the user to send the Serial Management Protocol (SMP) Report General command to a device. .Nm will display the data returned by the Report General command. If the SMP target supports the long response format, the additional data will be requested and displayed automatically. .Bl -tag -width 8n .It Fl l Request the long response format only. Not all SMP targets support the long response format. This option causes .Nm to skip sending the initial report general request without the long bit set and only issue a report general request with the long bit set. .El .It Ic smppc Allows the user to issue the Serial Management Protocol (SMP) PHY Control command to a device. This function should be used with some caution, as it can render devices inaccessible, and could potentially cause data corruption as well. The .Fl p argument is required to specify the PHY to operate on. .Bl -tag -width 17n .It Fl p Ar phy Specify the PHY to operate on. This argument is required. .It Fl l Request the long request/response format. Not all SMP targets support the long response format. For the PHY Control command, this currently only affects whether the request length is set to a value other than 0. .It Fl o Ar operation Specify a PHY control operation. Only one .Fl o operation may be specified. The operation may be specified numerically (in decimal, hexadecimal, or octal) or one of the following operation names may be specified: .Bl -tag -width 16n .It nop No operation. It is not necessary to specify this argument. .It linkreset Send the LINK RESET command to the phy. .It hardreset Send the HARD RESET command to the phy. .It disable Send the DISABLE command to the phy. Note that the LINK RESET or HARD RESET commands should re-enable the phy. .It clearerrlog Send the CLEAR ERROR LOG command. This clears the error log counters for the specified phy. .It clearaffiliation Send the CLEAR AFFILIATION command. This clears the affiliation from the STP initiator port with the same SAS address as the SMP initiator that requests the clear operation. .It sataportsel Send the TRANSMIT SATA PORT SELECTION SIGNAL command to the phy. This will cause a SATA port selector to use the given phy as its active phy and make the other phy inactive. .It clearitnl Send the CLEAR STP I_T NEXUS LOSS command to the PHY. .It setdevname Send the SET ATTACHED DEVICE NAME command to the PHY. This requires the .Fl d argument to specify the device name. .El .It Fl d Ar name Specify the attached device name. This option is needed with the .Fl o Ar setdevname phy operation. The name is a 64-bit number, and can be specified in decimal, hexadecimal or octal format. .It Fl m Ar rate Set the minimum physical link rate for the phy. This is a numeric argument. Currently known link rates are: .Bl -tag -width 5n .It 0x0 Do not change current value. .It 0x8 1.5 Gbps .It 0x9 3 Gbps .It 0xa 6 Gbps .El .Pp Other values may be specified for newer physical link rates. .It Fl M Ar rate Set the maximum physical link rate for the phy. This is a numeric argument. See the .Fl m argument description for known link rate arguments. .It Fl T Ar pp_timeout Set the partial pathway timeout value, in microseconds. See the .Tn ANSI .Tn SAS Protocol Layer (SPL) specification for more information on this field. .It Fl a Ar enable|disable Enable or disable SATA slumber phy power conditions. .It Fl A Ar enable|disable Enable or disable SATA partial power conditions. .It Fl s Ar enable|disable Enable or disable SAS slumber phy power conditions. .It Fl S Ar enable|disable Enable or disable SAS partial phy power conditions. .El .It Ic smpphylist List phys attached to a SAS expander, the address of the end device attached to the phy, and the inquiry data for that device and peripheral devices attached to that device. The inquiry data and peripheral devices are displayed if available. .Bl -tag -width 5n .It Fl l Turn on the long response format for the underlying SMP commands used for this command. .It Fl q Only print out phys that are attached to a device in the CAM EDT (Existing Device Table). .El .It Ic smpmaninfo Send the SMP Report Manufacturer Information command to the device and display the response. .Bl -tag -width 5n .It Fl l Turn on the long response format for the underlying SMP commands used for this command. .El .It Ic debug Turn on CAM debugging printfs in the kernel. This requires options CAMDEBUG in your kernel config file. WARNING: enabling debugging printfs currently causes an EXTREME number of kernel printfs. You may have difficulty turning off the debugging printfs once they start, since the kernel will be busy printing messages and unable to service other requests quickly. The .Ic debug function takes a number of arguments: .Bl -tag -width 18n .It Fl I Enable CAM_DEBUG_INFO printfs. .It Fl P Enable CAM_DEBUG_PERIPH printfs. .It Fl T Enable CAM_DEBUG_TRACE printfs. .It Fl S Enable CAM_DEBUG_SUBTRACE printfs. .It Fl X Enable CAM_DEBUG_XPT printfs. .It Fl c Enable CAM_DEBUG_CDB printfs. This will cause the kernel to print out the SCSI CDBs sent to the specified device(s). .It Fl p Enable CAM_DEBUG_PROBE printfs. .It all Enable debugging for all devices. .It off Turn off debugging for all devices .It bus Ns Op :target Ns Op :lun Turn on debugging for the given bus, target or lun. If the lun or target and lun are not specified, they are wildcarded. (i.e., just specifying a bus turns on debugging printfs for all devices on that bus.) .El .It Ic tags Show or set the number of "tagged openings" or simultaneous transactions we attempt to queue to a particular device. By default, the .Ic tags command, with no command-specific arguments (i.e., only generic arguments) prints out the "soft" maximum number of transactions that can be queued to the device in question. For more detailed information, use the .Fl v argument described below. .Bl -tag -width 7n .It Fl N Ar tags Set the number of tags for the given device. This must be between the minimum and maximum number set in the kernel quirk table. The default for most devices that support tagged queueing is a minimum of 2 and a maximum of 255. The minimum and maximum values for a given device may be determined by using the .Fl v switch. The meaning of the .Fl v switch for this .Nm subcommand is described below. .It Fl q Be quiet, and do not report the number of tags. This is generally used when setting the number of tags. .It Fl v The verbose flag has special functionality for the .Em tags argument. It causes .Nm to print out the tagged queueing related fields of the XPT_GDEV_TYPE CCB: .Bl -tag -width 13n .It dev_openings This is the amount of capacity for transactions queued to a given device. .It dev_active This is the number of transactions currently queued to a device. .It devq_openings This is the kernel queue space for transactions. This count usually mirrors dev_openings except during error recovery operations when the device queue is frozen (device is not allowed to receive commands), the number of dev_openings is reduced, or transaction replay is occurring. .It devq_queued This is the number of transactions waiting in the kernel queue for capacity on the device. This number is usually zero unless error recovery is in progress. .It held The held count is the number of CCBs held by peripheral drivers that have either just been completed or are about to be released to the transport layer for service by a device. Held CCBs reserve capacity on a given device. .It mintags This is the current "hard" minimum number of transactions that can be queued to a device at once. The .Ar dev_openings value above cannot go below this number. The default value for .Ar mintags is 2, although it may be set higher or lower for various devices. .It maxtags This is the "hard" maximum number of transactions that can be queued to a device at one time. The .Ar dev_openings value cannot go above this number. The default value for .Ar maxtags is 255, although it may be set higher or lower for various devices. .El .El .It Ic negotiate Show or negotiate various communication parameters. Some controllers may not support setting or changing some of these values. For instance, the Adaptec 174x controllers do not support changing a device's sync rate or offset. The .Nm utility will not attempt to set the parameter if the controller indicates that it does not support setting the parameter. To find out what the controller supports, use the .Fl v flag. The meaning of the .Fl v flag for the .Ic negotiate command is described below. Also, some controller drivers do not support setting negotiation parameters, even if the underlying controller supports negotiation changes. Some controllers, such as the Advansys wide controllers, support enabling and disabling synchronous negotiation for a device, but do not support setting the synchronous negotiation rate. .Bl -tag -width 17n .It Fl a Attempt to make the negotiation settings take effect immediately by sending a Test Unit Ready command to the device. .It Fl c Show or set current negotiation settings. This is the default. .It Fl D Ar enable|disable Enable or disable disconnection. .It Fl M Ar mode Set ATA mode. .It Fl O Ar offset Set the command delay offset. .It Fl q Be quiet, do not print anything. This is generally useful when you want to set a parameter, but do not want any status information. .It Fl R Ar syncrate Change the synchronization rate for a device. The sync rate is a floating point value specified in MHz. So, for instance, .Sq 20.000 is a legal value, as is .Sq 20 . .It Fl T Ar enable|disable Enable or disable tagged queueing for a device. .It Fl U Show or set user negotiation settings. The default is to show or set current negotiation settings. .It Fl v The verbose switch has special meaning for the .Ic negotiate subcommand. It causes .Nm to print out the contents of a Path Inquiry (XPT_PATH_INQ) CCB sent to the controller driver. .It Fl W Ar bus_width Specify the bus width to negotiate with a device. The bus width is specified in bits. The only useful values to specify are 8, 16, and 32 bits. The controller must support the bus width in question in order for the setting to take effect. .El .Pp In general, sync rate and offset settings will not take effect for a device until a command has been sent to the device. The .Fl a switch above will automatically send a Test Unit Ready to the device so negotiation parameters will take effect. .It Ic format Issue the .Tn SCSI FORMAT UNIT command to the named device. .Pp .Em WARNING! WARNING! WARNING! .Pp Low level formatting a disk will destroy ALL data on the disk. Use extreme caution when issuing this command. Many users low-level format disks that do not really need to be low-level formatted. There are relatively few scenarios that call for low-level formatting a disk. One reason for low-level formatting a disk is to initialize the disk after changing its physical sector size. Another reason for low-level formatting a disk is to revive the disk if you are getting "medium format corrupted" errors from the disk in response to read and write requests. .Pp Some disks take longer than others to format. Users should specify a timeout long enough to allow the format to complete. The default format timeout is 3 hours, which should be long enough for most disks. Some hard disks will complete a format operation in a very short period of time (on the order of 5 minutes or less). This is often because the drive does not really support the FORMAT UNIT command -- it just accepts the command, waits a few minutes and then returns it. .Pp The .Sq format subcommand takes several arguments that modify its default behavior. The .Fl q and .Fl y arguments can be useful for scripts. .Bl -tag -width 6n .It Fl q Be quiet, do not print any status messages. This option will not disable the questions, however. To disable questions, use the .Fl y argument, below. .It Fl r Run in .Dq report only mode. This will report status on a format that is already running on the drive. .It Fl w Issue a non-immediate format command. By default, .Nm issues the FORMAT UNIT command with the immediate bit set. This tells the device to immediately return the format command, before the format has actually completed. Then, .Nm gathers .Tn SCSI sense information from the device every second to determine how far along in the format process it is. If the .Fl w argument is specified, .Nm will issue a non-immediate format command, and will be unable to print any information to let the user know what percentage of the disk has been formatted. .It Fl y Do not ask any questions. By default, .Nm will ask the user if he/she really wants to format the disk in question, and also if the default format command timeout is acceptable. The user will not be asked about the timeout if a timeout is specified on the command line. .El .It Ic sanitize Issue the .Tn SCSI SANITIZE command to the named device. .Pp .Em WARNING! WARNING! WARNING! .Pp ALL data in the cache and on the disk will be destroyed or made inaccessible. Recovery of the data is not possible. Use extreme caution when issuing this command. .Pp The .Sq sanitize subcommand takes several arguments that modify its default behavior. The .Fl q and .Fl y arguments can be useful for scripts. .Bl -tag -width 6n .It Fl a Ar operation Specify the sanitize operation to perform. .Bl -tag -width 16n .It overwrite Perform an overwrite operation by writing a user supplied data pattern to the device one or more times. The pattern is given by the .Fl P argument. The number of times is given by the .Fl c argument. .It block Perform a block erase operation. All the device's blocks are set to a vendor defined value, typically zero. .It crypto Perform a cryptographic erase operation. The encryption keys are changed to prevent the decryption of the data. .It exitfailure Exits a previously failed sanitize operation. A failed sanitize operation can only be exited if it was run in the unrestricted completion mode, as provided by the .Fl U argument. .El .It Fl c Ar passes The number of passes when performing an .Sq overwrite operation. Valid values are between 1 and 31. The default is 1. .It Fl I When performing an .Sq overwrite operation, the pattern is inverted between consecutive passes. .It Fl P Ar pattern Path to the file containing the pattern to use when performing an .Sq overwrite operation. The pattern is repeated as needed to fill each block. .It Fl q Be quiet, do not print any status messages. This option will not disable the questions, however. To disable questions, use the .Fl y argument, below. .It Fl U Perform the sanitize in the unrestricted completion mode. If the operation fails, it can later be exited with the .Sq exitfailure operation. .It Fl r Run in .Dq report only mode. This will report status on a sanitize that is already running on the drive. .It Fl w Issue a non-immediate sanitize command. By default, .Nm issues the SANITIZE command with the immediate bit set. This tells the device to immediately return the sanitize command, before the sanitize has actually completed. Then, .Nm gathers .Tn SCSI sense information from the device every second to determine how far along in the sanitize process it is. If the .Fl w argument is specified, .Nm will issue a non-immediate sanitize command, and will be unable to print any information to let the user know what percentage of the disk has been sanitized. .It Fl y Do not ask any questions. By default, .Nm will ask the user if he/she really wants to sanitize the disk in question, and also if the default sanitize command timeout is acceptable. The user will not be asked about the timeout if a timeout is specified on the command line. .El .It Ic idle Put ATA device into IDLE state. Optional parameter .Pq Fl t specifies automatic standby timer value in seconds. Value 0 disables timer. .It Ic standby Put ATA device into STANDBY state. Optional parameter .Pq Fl t specifies automatic standby timer value in seconds. Value 0 disables timer. .It Ic sleep Put ATA device into SLEEP state. Note that the only way get device out of this state may be reset. +.It Ic apm +It optional parameter +.Pq Fl l +specified, enables and sets advanced power management level, where +1 -- minimum power, 127 -- maximum performance with standby, +128 -- minimum power without standby, 254 -- maximum performance. +If not specified -- APM is disabled. +.It Ic aam +It optional parameter +.Pq Fl l +specified, enables and sets automatic acoustic management level, where +1 -- minimum noise, 254 -- maximum performance. +If not specified -- AAM is disabled. .It Ic security Update or report security settings, using an ATA identify command (0xec). By default, .Nm will print out the security support and associated settings of the device. The .Ic security command takes several arguments: .Bl -tag -width 0n .It Fl d Ar pwd .Pp Disable device security using the given password for the selected user according to the devices configured security level. .It Fl e Ar pwd .Pp Erase the device using the given password for the selected user. .Pp .Em WARNING! WARNING! WARNING! .Pp Issuing a secure erase will .Em ERASE ALL user data on the device and may take several hours to complete. .Pp When this command is used against an SSD drive all its cells will be marked as empty, restoring it to factory default write performance. For SSD's this action usually takes just a few seconds. .It Fl f .Pp Freeze the security configuration of the specified device. .Pp After command completion any other commands that update the device lock mode shall be command aborted. Frozen mode is disabled by power-off or hardware reset. .It Fl h Ar pwd .Pp Enhanced erase the device using the given password for the selected user. .Pp .Em WARNING! WARNING! WARNING! .Pp Issuing an enhanced secure erase will .Em ERASE ALL user data on the device and may take several hours to complete. .Pp An enhanced erase writes predetermined data patterns to all user data areas, all previously written user data shall be overwritten, including sectors that are no longer in use due to reallocation. .It Fl k Ar pwd .Pp Unlock the device using the given password for the selected user according to the devices configured security level. .It Fl l Ar high|maximum .Pp Specifies which security level to set when issuing a .Fl s Ar pwd command. The security level determines device behavior when the master password is used to unlock the device. When the security level is set to high the device requires the unlock command and the master password to unlock. When the security level is set to maximum the device requires a secure erase with the master password to unlock. .Pp This option must be used in conjunction with one of the security action commands. .Pp Defaults to .Em high .It Fl q .Pp Be quiet, do not print any status messages. This option will not disable the questions, however. To disable questions, use the .Fl y argument, below. .It Fl s Ar pwd .Pp Password the device (enable security) using the given password for the selected user. This option can be combined with other options such as .Fl e Em pwd .Pp A master password may be set in a addition to the user password. The purpose of the master password is to allow an administrator to establish a password that is kept secret from the user, and which may be used to unlock the device if the user password is lost. .Pp .Em Note: Setting the master password does not enable device security. .Pp If the master password is set and the drive supports a Master Revision Code feature the Master Password Revision Code will be decremented. .It Fl T Ar timeout .Pp Overrides the default timeout, specified in seconds, used for both .Fl e and .Fl h this is useful if your system has problems processing long timeouts correctly. .Pp Usually the timeout is calculated from the information stored on the drive if present, otherwise it defaults to 2 hours. .It Fl U Ar user|master .Pp Specifies which user to set / use for the running action command, valid values are user or master and defaults to master if not set. .Pp This option must be used in conjunction with one of the security action commands. .Pp Defaults to .Em master .It Fl y .Pp Confirm yes to dangerous options such as .Fl e without prompting for confirmation. .Pp .El If the password specified for any action commands does not match the configured password for the specified user the command will fail. .Pp The password in all cases is limited to 32 characters, longer passwords will fail. .It Ic hpa Update or report Host Protected Area details. By default .Nm will print out the HPA support and associated settings of the device. The .Ic hpa command takes several optional arguments: .Bl -tag -width 0n .It Fl f .Pp Freeze the HPA configuration of the specified device. .Pp After command completion any other commands that update the HPA configuration shall be command aborted. Frozen mode is disabled by power-off or hardware reset. .It Fl l .Pp Lock the HPA configuration of the device until a successful call to unlock or the next power-on reset occurs. .It Fl P .Pp Make the HPA max sectors persist across power-on reset or a hardware reset. This must be used in combination with .Fl s Ar max_sectors . .It Fl p Ar pwd .Pp Set the HPA configuration password required for unlock calls. .It Fl q .Pp Be quiet, do not print any status messages. This option will not disable the questions. To disable questions, use the .Fl y argument, below. .It Fl s Ar max_sectors .Pp Configures the maximum user accessible sectors of the device. This will change the number of sectors the device reports. .Pp .Em WARNING! WARNING! WARNING! .Pp Changing the max sectors of a device using this option will make the data on the device beyond the specified value inaccessible. .Pp Only one successful .Fl s Ar max_sectors call can be made without a power-on reset or a hardware reset of the device. .It Fl U Ar pwd .Pp Unlock the HPA configuration of the specified device using the given password. If the password specified does not match the password configured via .Fl p Ar pwd the command will fail. .Pp After 5 failed unlock calls, due to password miss-match, the device will refuse additional unlock calls until after a power-on reset. .It Fl y .Pp Confirm yes to dangerous options such as .Fl e without prompting for confirmation .Pp .El The password for all HPA commands is limited to 32 characters, longer passwords will fail. .It Ic fwdownload Program firmware of the named SCSI device using the image file provided. .Pp Current list of supported vendors: .Bl -bullet -offset indent -compact .It HITACHI .It HP .It IBM .It PLEXTOR .It QUANTUM .It SAMSUNG .It SEAGATE .El .Pp .Em WARNING! WARNING! WARNING! .Pp Little testing has been done to make sure that different device models from each vendor work correctly with the fwdownload command. A vendor name appearing in the supported list means only that firmware of at least one device type from that vendor has successfully been programmed with the fwdownload command. Extra caution should be taken when using this command since there is no guarantee it will not break a device from the listed vendors. Ensure that you have a recent backup of the data on the device before performing a firmware update. .Bl -tag -width 11n .It Fl f Ar fw_image Path to the firmware image file to be downloaded to the specified device. .It Fl y Do not ask for confirmation. .It Fl s Run in simulation mode. Packet sizes that will be sent are shown, but no actual packet is sent to the device. No confirmation is asked in simulation mode. .It Fl v Besides showing sense information in case of a failure, the verbose option causes .Nm to output a line for every firmware segment that is sent to the device by the fwdownload command -- the same as the ones shown in simulation mode. .El .It Ic persist Persistent reservation support. Persistent reservations are a way to reserve a particular .Tn SCSI LUN for use by one or more .Tn SCSI initiators. If the .Fl i option is specified, .Nm will issue the .Tn SCSI PERSISTENT RESERVE IN command using the requested service action. If the .Fl o option is specified, .Nm will issue the .Tn SCSI PERSISTENT RESERVE OUT command using the requested service action. One of those two options is required. .Pp Persistent reservations are complex, and fully explaining them is outside the scope of this manual. Please visit http://www.t10.org and download the latest SPC spec for a full explanation of persistent reservations. .Bl -tag -width 8n .It Fl i Ar mode Specify the service action for the PERSISTENT RESERVE IN command. Supported service actions: .Bl -tag -width 19n .It read_keys Report the current persistent reservation generation (PRgeneration) and any registered keys. .It read_reservation Report the persistent reservation, if any. .It report_capabilities Report the persistent reservation capabilities of the LUN. .It read_full_status Report the full status of persistent reservations on the LUN. .El .It Fl o Ar mode Specify the service action for the PERSISTENT RESERVE OUT command. For service actions like register that are components of other service action names, the entire name must be specified. Otherwise, enough of the service action name must be specified to distinguish it from other possible service actions. Supported service actions: .Bl -tag -width 15n .It register Register a reservation key with the LUN or unregister a reservation key. To register a key, specify the requested key as the Service Action Reservation Key. To unregister a key, specify the previously registered key as the Reservation Key. To change a key, specify the old key as the Reservation Key and the new key as the Service Action Reservation Key. .It register_ignore This is similar to the register subcommand, except that the Reservation Key is ignored. The Service Action Reservation Key will overwrite any previous key registered for the initiator. .It reserve Create a reservation. A key must be registered with the LUN before the LUN can be reserved, and it must be specified as the Reservation Key. The type of reservation must also be specified. The scope defaults to LUN scope (LU_SCOPE), but may be changed. .It release Release a reservation. The Reservation Key must be specified. .It clear Release a reservation and remove all keys from the device. The Reservation Key must be specified. .It preempt Remove a reservation belonging to another initiator. The Reservation Key must be specified. The Service Action Reservation Key may be specified, depending on the operation being performed. .It preempt_abort Remove a reservation belonging to another initiator and abort all outstanding commands from that initiator. The Reservation Key must be specified. The Service Action Reservation Key may be specified, depending on the operation being performed. .It register_move Register another initiator with the LUN, and establish a reservation on the LUN for that initiator. The Reservation Key and Service Action Reservation Key must be specified. .It replace_lost Replace Lost Reservation information. .El .It Fl a Set the All Target Ports (ALL_TG_PT) bit. This requests that the key registration be applied to all target ports and not just the particular target port that receives the command. This only applies to the register and register_ignore actions. .It Fl I Ar tid Specify a Transport ID. This only applies to the Register and Register and Move service actions for Persistent Reserve Out. Multiple Transport IDs may be specified with multiple .Fl I arguments. With the Register service action, specifying one or more Transport IDs implicitly enables the .Fl S option which turns on the SPEC_I_PT bit. Transport IDs generally have the format protocol,id. .Bl -tag -width 5n .It SAS A SAS Transport ID consists of .Dq sas, followed by a 64-bit SAS address. For example: .Pp .Dl sas,0x1234567812345678 .It FC A Fibre Channel Transport ID consists of .Dq fcp, followed by a 64-bit Fibre Channel World Wide Name. For example: .Pp .Dl fcp,0x1234567812345678 .It SPI A Parallel SCSI address consists of .Dq spi, followed by a SCSI target ID and a relative target port identifier. For example: .Pp .Dl spi,4,1 .It 1394 An IEEE 1394 (Firewire) Transport ID consists of .Dq sbp, followed by a 64-bit EUI-64 IEEE 1394 node unique identifier. For example: .Pp .Dl sbp,0x1234567812345678 .It RDMA A SCSI over RDMA Transport ID consists of .Dq srp, followed by a 128-bit RDMA initiator port identifier. The port identifier must be exactly 32 or 34 (if the leading 0x is included) hexadecimal digits. Only hexadecimal (base 16) numbers are supported. For example: .Pp .Dl srp,0x12345678123456781234567812345678 .It iSCSI An iSCSI Transport ID consists an iSCSI name and optionally a separator and iSCSI session ID. For example, if only the iSCSI name is specified: .Pp .Dl iqn.2012-06.com.example:target0 .Pp If the iSCSI separator and initiator session ID are specified: .Pp .Dl iqn.2012-06.com.example:target0,i,0x123 .It PCIe A SCSI over PCIe Transport ID consists of .Dq sop, followed by a PCIe Routing ID. The Routing ID consists of a bus, device and function or in the alternate form, a bus and function. The bus must be in the range of 0 to 255 inclusive and the device must be in the range of 0 to 31 inclusive. The function must be in the range of 0 to 7 inclusive if the standard form is used, and in the range of 0 to 255 inclusive if the alternate form is used. For example, if a bus, device and function are specified for the standard Routing ID form: .Pp .Dl sop,4,5,1 .Pp If the alternate Routing ID form is used: .Pp .Dl sop,4,1 .El .It Fl k Ar key Specify the Reservation Key. This may be in decimal, octal or hexadecimal format. The value is zero by default if not otherwise specified. The value must be between 0 and 2^64 - 1, inclusive. .It Fl K Ar key Specify the Service Action Reservation Key. This may be in decimal, octal or hexadecimal format. The value is zero by default if not otherwise specified. The value must be between 0 and 2^64 - 1, inclusive. .It Fl p Enable the Activate Persist Through Power Loss bit. This is only used for the register and register_ignore actions. This requests that the reservation persist across power loss events. .It Fl s Ar scope Specify the scope of the reservation. The scope may be specified by name or by number. The scope is ignored for register, register_ignore and clear. If the desired scope isn't available by name, you may specify the number. .Bl -tag -width 7n .It lun LUN scope (0x00). This encompasses the entire LUN. .It extent Extent scope (0x01). .It element Element scope (0x02). .El .It Fl R Ar rtp Specify the Relative Target Port. This only applies to the Register and Move service action of the Persistent Reserve Out command. .It Fl S Enable the SPEC_I_PT bit. This only applies to the Register service action of Persistent Reserve Out. You must also specify at least one Transport ID with .Fl I if this option is set. If you specify a Transport ID, this option is automatically set. It is an error to specify this option for any service action other than Register. .It Fl T Ar type Specify the reservation type. The reservation type may be specified by name or by number. If the desired reservation type isn't available by name, you may specify the number. Supported reservation type names: .Bl -tag -width 11n .It read_shared Read Shared mode. .It wr_ex Write Exclusive mode. May also be specified as .Dq write_exclusive . .It rd_ex Read Exclusive mode. May also be specified as .Dq read_exclusive . .It ex_ac Exclusive access mode. May also be specified as .Dq exclusive_access . .It wr_ex_ro Write Exclusive Registrants Only mode. May also be specified as .Dq write_exclusive_reg_only . .It ex_ac_ro Exclusive Access Registrants Only mode. May also be specified as .Dq exclusive_access_reg_only . .It wr_ex_ar Write Exclusive All Registrants mode. May also be specified as .Dq write_exclusive_all_regs . .It ex_ac_ar Exclusive Access All Registrants mode. May also be specified as .Dq exclusive_access_all_regs . .El .It Fl U Specify that the target should unregister the initiator that sent the Register and Move request. By default, the target will not unregister the initiator that sends the Register and Move request. This option only applies to the Register and Move service action of the Persistent Reserve Out command. .El .It Ic help Print out verbose usage information. .El .Sh ENVIRONMENT The .Ev SCSI_MODES variable allows the user to specify an alternate mode page format file. .Pp The .Ev EDITOR variable determines which text editor .Nm starts when editing mode pages. .Sh FILES .Bl -tag -width /usr/share/misc/scsi_modes -compact .It Pa /usr/share/misc/scsi_modes is the SCSI mode format database. .It Pa /dev/xpt0 is the transport layer device. .It Pa /dev/pass* are the CAM application passthrough devices. .El .Sh EXAMPLES .Dl camcontrol eject -n cd -u 1 -v .Pp Eject the CD from cd1, and print SCSI sense information if the command fails. .Pp .Dl camcontrol tur da0 .Pp Send the SCSI test unit ready command to da0. The .Nm utility will report whether the disk is ready, but will not display sense information if the command fails since the .Fl v switch was not specified. .Bd -literal -offset indent camcontrol tur da1 -E -C 4 -t 50 -v .Ed .Pp Send a test unit ready command to da1. Enable kernel error recovery. Specify a retry count of 4, and a timeout of 50 seconds. Enable sense printing (with the .Fl v flag) if the command fails. Since error recovery is turned on, the disk will be spun up if it is not currently spinning. The .Nm utility will report whether the disk is ready. .Bd -literal -offset indent camcontrol cmd -n cd -u 1 -v -c "3C 00 00 00 00 00 00 00 0e 00" \e -i 0xe "s1 i3 i1 i1 i1 i1 i1 i1 i1 i1 i1 i1" .Ed .Pp Issue a READ BUFFER command (0x3C) to cd1. Display the buffer size of cd1, and display the first 10 bytes from the cache on cd1. Display SCSI sense information if the command fails. .Bd -literal -offset indent camcontrol cmd -n cd -u 1 -v -c "3B 00 00 00 00 00 00 00 0e 00" \e -o 14 "00 00 00 00 1 2 3 4 5 6 v v v v" 7 8 9 8 .Ed .Pp Issue a WRITE BUFFER (0x3B) command to cd1. Write out 10 bytes of data, not including the (reserved) 4 byte header. Print out sense information if the command fails. Be very careful with this command, improper use may cause data corruption. .Bd -literal -offset indent camcontrol modepage da3 -m 1 -e -P 3 .Ed .Pp Edit mode page 1 (the Read-Write Error Recover page) for da3, and save the settings on the drive. Mode page 1 contains a disk drive's auto read and write reallocation settings, among other things. .Pp .Dl camcontrol rescan all .Pp Rescan all SCSI busses in the system for devices that have been added, removed or changed. .Pp .Dl camcontrol rescan 0 .Pp Rescan SCSI bus 0 for devices that have been added, removed or changed. .Pp .Dl camcontrol rescan 0:1:0 .Pp Rescan SCSI bus 0, target 1, lun 0 to see if it has been added, removed, or changed. .Pp .Dl camcontrol tags da5 -N 24 .Pp Set the number of concurrent transactions for da5 to 24. .Bd -literal -offset indent camcontrol negotiate -n da -u 4 -T disable .Ed .Pp Disable tagged queueing for da4. .Bd -literal -offset indent camcontrol negotiate -n da -u 3 -R 20.000 -O 15 -a .Ed .Pp Negotiate a sync rate of 20MHz and an offset of 15 with da3. Then send a Test Unit Ready command to make the settings take effect. .Bd -literal -offset indent camcontrol smpcmd ses0 -v -r 4 "40 0 00 0" -R 1020 "s9 i1" .Ed .Pp Send the SMP REPORT GENERAL command to ses0, and display the number of PHYs it contains. Display SMP errors if the command fails. .Bd -literal -offset indent camcontrol security ada0 .Ed .Pp Report security support and settings for ada0 .Bd -literal -offset indent camcontrol security ada0 -U user -s MyPass .Ed .Pp Enable security on device ada0 with the password MyPass .Bd -literal -offset indent camcontrol security ada0 -U user -e MyPass .Ed .Pp Secure erase ada0 which has had security enabled with user password MyPass .Pp .Em WARNING! WARNING! WARNING! .Pp This will .Em ERASE ALL data from the device, so backup your data before using! .Pp This command can be used against an SSD drive to restoring it to factory default write performance. .Bd -literal -offset indent camcontrol hpa ada0 .Ed .Pp Report HPA support and settings for ada0 (also reported via identify). .Bd -literal -offset indent camcontrol hpa ada0 -s 10240 .Ed .Pp Enables HPA on ada0 setting the maximum reported sectors to 10240. .Pp .Em WARNING! WARNING! WARNING! .Pp This will .Em PREVENT ACCESS to all data on the device beyond this limit until HPA is disabled by setting HPA to native max sectors of the device, which can only be done after a power-on or hardware reset! .Pp .Em DO NOT use this on a device which has an active filesystem! .Pp .Bd -literal -offset indent camcontrol persist da0 -v -i read_keys .Ed .Pp This will read any persistent reservation keys registered with da0, and display any errors encountered when sending the PERSISTENT RESERVE IN .Tn SCSI command. .Bd -literal -offset indent camcontrol persist da0 -v -o register -a -K 0x12345678 .Ed .Pp This will register the persistent reservation key 0x12345678 with da0, apply that registration to all ports on da0, and display any errors that occur when sending the PERSISTENT RESERVE OUT command. .Bd -literal -offset indent camcontrol persist da0 -v -o reserve -s lun -k 0x12345678 -T ex_ac .Ed .Pp This will reserve da0 for the exlusive use of the initiator issuing the command. The scope of the reservation is the entire LUN. Any errors sending the PERSISTENT RESERVE OUT command will be displayed. .Bd -literal -offset indent camcontrol persist da0 -v -i read_full .Ed .Pp This will display the full status of all reservations on da0 and print out status if there are any errors. .Bd -literal -offset indent camcontrol persist da0 -v -o release -k 0x12345678 -T ex_ac .Ed .Pp This will release a reservation on da0 of the type ex_ac (Exclusive Access). The Reservation Key for this registration is 0x12345678. Any errors that occur will be displayed. .Bd -literal -offset indent camcontrol persist da0 -v -o register -K 0x12345678 -S \e -I sas,0x1234567812345678 -I sas,0x8765432187654321 .Ed .Pp This will register the key 0x12345678 with da0, specifying that it applies to the SAS initiators with SAS addresses 0x1234567812345678 and 0x8765432187654321. .Bd -literal -offset indent camcontrol persist da0 -v -o register_move -k 0x87654321 \e -K 0x12345678 -U -p -R 2 -I fcp,0x1234567812345678 .Ed .Pp This will move the registration from the current initiator, whose Registration Key is 0x87654321, to the Fibre Channel initiator with the Fiber Channel World Wide Node Name 0x1234567812345678. A new registration key, 0x12345678, will be registered for the initiator with the Fibre Channel World Wide Node Name 0x1234567812345678, and the current initiator will be unregistered from the target. The reservation will be moved to relative target port 2 on the target device. The registration will persist across power losses. .Sh SEE ALSO .Xr cam 3 , .Xr cam_cdbparse 3 , .Xr cam 4 , .Xr pass 4 , .Xr xpt 4 .Sh HISTORY The .Nm utility first appeared in .Fx 3.0 . .Pp The mode page editing code and arbitrary SCSI command code are based upon code in the old .Xr scsi 8 utility and .Xr scsi 3 library, written by Julian Elischer and Peter Dufault. The .Xr scsi 8 program first appeared in .Bx 386 0.1.2.4 , and first appeared in .Fx in .Fx 2.0.5 . .Sh AUTHORS .An Kenneth Merry Aq ken@FreeBSD.org .Sh BUGS The code that parses the generic command line arguments does not know that some of the subcommands take multiple arguments. So if, for instance, you tried something like this: .Bd -literal -offset indent camcontrol cmd -n da -u 1 -c "00 00 00 00 00 v" 0x00 -v .Ed .Pp The sense information from the test unit ready command would not get printed out, since the first .Xr getopt 3 call in .Nm bails out when it sees the second argument to .Fl c (0x00), above. Fixing this behavior would take some gross code, or changes to the .Xr getopt 3 interface. The best way to circumvent this problem is to always make sure to specify generic .Nm arguments before any command-specific arguments. Index: stable/10/sbin/camcontrol/camcontrol.c =================================================================== --- stable/10/sbin/camcontrol/camcontrol.c (revision 280678) +++ stable/10/sbin/camcontrol/camcontrol.c (revision 280679) @@ -1,8613 +1,8686 @@ /* * Copyright (c) 1997-2007 Kenneth D. Merry * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef MINIMALISTIC #include #include #endif #include #include #include #include #include #include #include #include #include #include #include "camcontrol.h" typedef enum { CAM_CMD_NONE = 0x00000000, CAM_CMD_DEVLIST = 0x00000001, CAM_CMD_TUR = 0x00000002, CAM_CMD_INQUIRY = 0x00000003, CAM_CMD_STARTSTOP = 0x00000004, CAM_CMD_RESCAN = 0x00000005, CAM_CMD_READ_DEFECTS = 0x00000006, CAM_CMD_MODE_PAGE = 0x00000007, CAM_CMD_SCSI_CMD = 0x00000008, CAM_CMD_DEVTREE = 0x00000009, CAM_CMD_USAGE = 0x0000000a, CAM_CMD_DEBUG = 0x0000000b, CAM_CMD_RESET = 0x0000000c, CAM_CMD_FORMAT = 0x0000000d, CAM_CMD_TAG = 0x0000000e, CAM_CMD_RATE = 0x0000000f, CAM_CMD_DETACH = 0x00000010, CAM_CMD_REPORTLUNS = 0x00000011, CAM_CMD_READCAP = 0x00000012, CAM_CMD_IDENTIFY = 0x00000013, CAM_CMD_IDLE = 0x00000014, CAM_CMD_STANDBY = 0x00000015, CAM_CMD_SLEEP = 0x00000016, CAM_CMD_SMP_CMD = 0x00000017, CAM_CMD_SMP_RG = 0x00000018, CAM_CMD_SMP_PC = 0x00000019, CAM_CMD_SMP_PHYLIST = 0x0000001a, CAM_CMD_SMP_MANINFO = 0x0000001b, CAM_CMD_DOWNLOAD_FW = 0x0000001c, CAM_CMD_SECURITY = 0x0000001d, CAM_CMD_HPA = 0x0000001e, CAM_CMD_SANITIZE = 0x0000001f, - CAM_CMD_PERSIST = 0x00000020 + CAM_CMD_PERSIST = 0x00000020, + CAM_CMD_APM = 0x00000021, + CAM_CMD_AAM = 0x00000022 } cam_cmdmask; typedef enum { CAM_ARG_NONE = 0x00000000, CAM_ARG_VERBOSE = 0x00000001, CAM_ARG_DEVICE = 0x00000002, CAM_ARG_BUS = 0x00000004, CAM_ARG_TARGET = 0x00000008, CAM_ARG_LUN = 0x00000010, CAM_ARG_EJECT = 0x00000020, CAM_ARG_UNIT = 0x00000040, CAM_ARG_FORMAT_BLOCK = 0x00000080, CAM_ARG_FORMAT_BFI = 0x00000100, CAM_ARG_FORMAT_PHYS = 0x00000200, CAM_ARG_PLIST = 0x00000400, CAM_ARG_GLIST = 0x00000800, CAM_ARG_GET_SERIAL = 0x00001000, CAM_ARG_GET_STDINQ = 0x00002000, CAM_ARG_GET_XFERRATE = 0x00004000, CAM_ARG_INQ_MASK = 0x00007000, CAM_ARG_MODE_EDIT = 0x00008000, CAM_ARG_PAGE_CNTL = 0x00010000, CAM_ARG_TIMEOUT = 0x00020000, CAM_ARG_CMD_IN = 0x00040000, CAM_ARG_CMD_OUT = 0x00080000, CAM_ARG_DBD = 0x00100000, CAM_ARG_ERR_RECOVER = 0x00200000, CAM_ARG_RETRIES = 0x00400000, CAM_ARG_START_UNIT = 0x00800000, CAM_ARG_DEBUG_INFO = 0x01000000, CAM_ARG_DEBUG_TRACE = 0x02000000, CAM_ARG_DEBUG_SUBTRACE = 0x04000000, CAM_ARG_DEBUG_CDB = 0x08000000, CAM_ARG_DEBUG_XPT = 0x10000000, CAM_ARG_DEBUG_PERIPH = 0x20000000, CAM_ARG_DEBUG_PROBE = 0x40000000, } cam_argmask; struct camcontrol_opts { const char *optname; uint32_t cmdnum; cam_argmask argnum; const char *subopt; }; #ifndef MINIMALISTIC struct ata_res_pass16 { u_int16_t reserved[5]; u_int8_t flags; u_int8_t error; u_int8_t sector_count_exp; u_int8_t sector_count; u_int8_t lba_low_exp; u_int8_t lba_low; u_int8_t lba_mid_exp; u_int8_t lba_mid; u_int8_t lba_high_exp; u_int8_t lba_high; u_int8_t device; u_int8_t status; }; struct ata_set_max_pwd { u_int16_t reserved1; u_int8_t password[32]; u_int16_t reserved2[239]; }; static const char scsicmd_opts[] = "a:c:dfi:o:r"; static const char readdefect_opts[] = "f:GPqsS:X"; static const char negotiate_opts[] = "acD:M:O:qR:T:UW:"; static const char smprg_opts[] = "l"; static const char smppc_opts[] = "a:A:d:lm:M:o:p:s:S:T:"; static const char smpphylist_opts[] = "lq"; static char pwd_opt; #endif static struct camcontrol_opts option_table[] = { #ifndef MINIMALISTIC {"tur", CAM_CMD_TUR, CAM_ARG_NONE, NULL}, {"inquiry", CAM_CMD_INQUIRY, CAM_ARG_NONE, "DSR"}, {"identify", CAM_CMD_IDENTIFY, CAM_ARG_NONE, NULL}, {"start", CAM_CMD_STARTSTOP, CAM_ARG_START_UNIT, NULL}, {"stop", CAM_CMD_STARTSTOP, CAM_ARG_NONE, NULL}, {"load", CAM_CMD_STARTSTOP, CAM_ARG_START_UNIT | CAM_ARG_EJECT, NULL}, {"eject", CAM_CMD_STARTSTOP, CAM_ARG_EJECT, NULL}, {"reportluns", CAM_CMD_REPORTLUNS, CAM_ARG_NONE, "clr:"}, {"readcapacity", CAM_CMD_READCAP, CAM_ARG_NONE, "bhHNqs"}, #endif /* MINIMALISTIC */ {"rescan", CAM_CMD_RESCAN, CAM_ARG_NONE, NULL}, {"reset", CAM_CMD_RESET, CAM_ARG_NONE, NULL}, #ifndef MINIMALISTIC {"cmd", CAM_CMD_SCSI_CMD, CAM_ARG_NONE, scsicmd_opts}, {"command", CAM_CMD_SCSI_CMD, CAM_ARG_NONE, scsicmd_opts}, {"smpcmd", CAM_CMD_SMP_CMD, CAM_ARG_NONE, "r:R:"}, {"smprg", CAM_CMD_SMP_RG, CAM_ARG_NONE, smprg_opts}, {"smpreportgeneral", CAM_CMD_SMP_RG, CAM_ARG_NONE, smprg_opts}, {"smppc", CAM_CMD_SMP_PC, CAM_ARG_NONE, smppc_opts}, {"smpphycontrol", CAM_CMD_SMP_PC, CAM_ARG_NONE, smppc_opts}, {"smpplist", CAM_CMD_SMP_PHYLIST, CAM_ARG_NONE, smpphylist_opts}, {"smpphylist", CAM_CMD_SMP_PHYLIST, CAM_ARG_NONE, smpphylist_opts}, {"smpmaninfo", CAM_CMD_SMP_MANINFO, CAM_ARG_NONE, "l"}, {"defects", CAM_CMD_READ_DEFECTS, CAM_ARG_NONE, readdefect_opts}, {"defectlist", CAM_CMD_READ_DEFECTS, CAM_ARG_NONE, readdefect_opts}, #endif /* MINIMALISTIC */ {"devlist", CAM_CMD_DEVTREE, CAM_ARG_NONE, "-b"}, #ifndef MINIMALISTIC {"periphlist", CAM_CMD_DEVLIST, CAM_ARG_NONE, NULL}, {"modepage", CAM_CMD_MODE_PAGE, CAM_ARG_NONE, "bdelm:P:"}, {"tags", CAM_CMD_TAG, CAM_ARG_NONE, "N:q"}, {"negotiate", CAM_CMD_RATE, CAM_ARG_NONE, negotiate_opts}, {"rate", CAM_CMD_RATE, CAM_ARG_NONE, negotiate_opts}, {"debug", CAM_CMD_DEBUG, CAM_ARG_NONE, "IPTSXcp"}, {"format", CAM_CMD_FORMAT, CAM_ARG_NONE, "qrwy"}, {"sanitize", CAM_CMD_SANITIZE, CAM_ARG_NONE, "a:c:IP:qrUwy"}, {"idle", CAM_CMD_IDLE, CAM_ARG_NONE, "t:"}, {"standby", CAM_CMD_STANDBY, CAM_ARG_NONE, "t:"}, {"sleep", CAM_CMD_SLEEP, CAM_ARG_NONE, ""}, + {"apm", CAM_CMD_APM, CAM_ARG_NONE, "l:"}, + {"aam", CAM_CMD_AAM, CAM_ARG_NONE, "l:"}, {"fwdownload", CAM_CMD_DOWNLOAD_FW, CAM_ARG_NONE, "f:ys"}, {"security", CAM_CMD_SECURITY, CAM_ARG_NONE, "d:e:fh:k:l:qs:T:U:y"}, {"hpa", CAM_CMD_HPA, CAM_ARG_NONE, "Pflp:qs:U:y"}, {"persist", CAM_CMD_PERSIST, CAM_ARG_NONE, "ai:I:k:K:o:ps:ST:U"}, #endif /* MINIMALISTIC */ {"help", CAM_CMD_USAGE, CAM_ARG_NONE, NULL}, {"-?", CAM_CMD_USAGE, CAM_ARG_NONE, NULL}, {"-h", CAM_CMD_USAGE, CAM_ARG_NONE, NULL}, {NULL, 0, 0, NULL} }; struct cam_devitem { struct device_match_result dev_match; int num_periphs; struct periph_match_result *periph_matches; struct scsi_vpd_device_id *device_id; int device_id_len; STAILQ_ENTRY(cam_devitem) links; }; struct cam_devlist { STAILQ_HEAD(, cam_devitem) dev_queue; path_id_t path_id; }; static cam_cmdmask cmdlist; static cam_argmask arglist; camcontrol_optret getoption(struct camcontrol_opts *table, char *arg, uint32_t *cmdnum, cam_argmask *argnum, const char **subopt); #ifndef MINIMALISTIC static int getdevlist(struct cam_device *device); #endif /* MINIMALISTIC */ static int getdevtree(int argc, char **argv, char *combinedopt); #ifndef MINIMALISTIC static int testunitready(struct cam_device *device, int retry_count, int timeout, int quiet); static int scsistart(struct cam_device *device, int startstop, int loadeject, int retry_count, int timeout); static int scsiinquiry(struct cam_device *device, int retry_count, int timeout); static int scsiserial(struct cam_device *device, int retry_count, int timeout); static int camxferrate(struct cam_device *device); #endif /* MINIMALISTIC */ static int parse_btl(char *tstr, path_id_t *bus, target_id_t *target, lun_id_t *lun, cam_argmask *arglst); static int dorescan_or_reset(int argc, char **argv, int rescan); static int rescan_or_reset_bus(path_id_t bus, int rescan); static int scanlun_or_reset_dev(path_id_t bus, target_id_t target, lun_id_t lun, int scan); #ifndef MINIMALISTIC static int readdefects(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static void modepage(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int scsicmd(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int smpcmd(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int smpreportgeneral(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int smpphycontrol(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int smpmaninfo(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int getdevid(struct cam_devitem *item); static int buildbusdevlist(struct cam_devlist *devlist); static void freebusdevlist(struct cam_devlist *devlist); static struct cam_devitem *findsasdevice(struct cam_devlist *devlist, uint64_t sasaddr); static int smpphylist(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int tagcontrol(struct cam_device *device, int argc, char **argv, char *combinedopt); static void cts_print(struct cam_device *device, struct ccb_trans_settings *cts); static void cpi_print(struct ccb_pathinq *cpi); static int get_cpi(struct cam_device *device, struct ccb_pathinq *cpi); static int get_cgd(struct cam_device *device, struct ccb_getdev *cgd); static int get_print_cts(struct cam_device *device, int user_settings, int quiet, struct ccb_trans_settings *cts); static int ratecontrol(struct cam_device *device, int retry_count, int timeout, int argc, char **argv, char *combinedopt); static int scsiformat(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int scsisanitize(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int scsireportluns(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int scsireadcapacity(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int atapm(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout); static int atasecurity(struct cam_device *device, int retry_count, int timeout, int argc, char **argv, char *combinedopt); static int atahpa(struct cam_device *device, int retry_count, int timeout, int argc, char **argv, char *combinedopt); #endif /* MINIMALISTIC */ #ifndef min #define min(a,b) (((a)<(b))?(a):(b)) #endif #ifndef max #define max(a,b) (((a)>(b))?(a):(b)) #endif camcontrol_optret getoption(struct camcontrol_opts *table, char *arg, uint32_t *cmdnum, cam_argmask *argnum, const char **subopt) { struct camcontrol_opts *opts; int num_matches = 0; for (opts = table; (opts != NULL) && (opts->optname != NULL); opts++) { if (strncmp(opts->optname, arg, strlen(arg)) == 0) { *cmdnum = opts->cmdnum; *argnum = opts->argnum; *subopt = opts->subopt; if (++num_matches > 1) return(CC_OR_AMBIGUOUS); } } if (num_matches > 0) return(CC_OR_FOUND); else return(CC_OR_NOT_FOUND); } #ifndef MINIMALISTIC static int getdevlist(struct cam_device *device) { union ccb *ccb; char status[32]; int error = 0; ccb = cam_getccb(device); ccb->ccb_h.func_code = XPT_GDEVLIST; ccb->ccb_h.flags = CAM_DIR_NONE; ccb->ccb_h.retry_count = 1; ccb->cgdl.index = 0; ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS; while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) { if (cam_send_ccb(device, ccb) < 0) { perror("error getting device list"); cam_freeccb(ccb); return(1); } status[0] = '\0'; switch (ccb->cgdl.status) { case CAM_GDEVLIST_MORE_DEVS: strcpy(status, "MORE"); break; case CAM_GDEVLIST_LAST_DEVICE: strcpy(status, "LAST"); break; case CAM_GDEVLIST_LIST_CHANGED: strcpy(status, "CHANGED"); break; case CAM_GDEVLIST_ERROR: strcpy(status, "ERROR"); error = 1; break; } fprintf(stdout, "%s%d: generation: %d index: %d status: %s\n", ccb->cgdl.periph_name, ccb->cgdl.unit_number, ccb->cgdl.generation, ccb->cgdl.index, status); /* * If the list has changed, we need to start over from the * beginning. */ if (ccb->cgdl.status == CAM_GDEVLIST_LIST_CHANGED) ccb->cgdl.index = 0; } cam_freeccb(ccb); return(error); } #endif /* MINIMALISTIC */ static int getdevtree(int argc, char **argv, char *combinedopt) { union ccb ccb; int bufsize, fd; unsigned int i; int need_close = 0; int error = 0; int skip_device = 0; int busonly = 0; int c; while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c) { case 'b': if ((arglist & CAM_ARG_VERBOSE) == 0) busonly = 1; break; default: break; } } if ((fd = open(XPT_DEVICE, O_RDWR)) == -1) { warn("couldn't open %s", XPT_DEVICE); return(1); } bzero(&ccb, sizeof(union ccb)); ccb.ccb_h.path_id = CAM_XPT_PATH_ID; ccb.ccb_h.target_id = CAM_TARGET_WILDCARD; ccb.ccb_h.target_lun = CAM_LUN_WILDCARD; ccb.ccb_h.func_code = XPT_DEV_MATCH; bufsize = sizeof(struct dev_match_result) * 100; ccb.cdm.match_buf_len = bufsize; ccb.cdm.matches = (struct dev_match_result *)malloc(bufsize); if (ccb.cdm.matches == NULL) { warnx("can't malloc memory for matches"); close(fd); return(1); } ccb.cdm.num_matches = 0; /* * We fetch all nodes, since we display most of them in the default * case, and all in the verbose case. */ ccb.cdm.num_patterns = 0; ccb.cdm.pattern_buf_len = 0; /* * We do the ioctl multiple times if necessary, in case there are * more than 100 nodes in the EDT. */ do { if (ioctl(fd, CAMIOCOMMAND, &ccb) == -1) { warn("error sending CAMIOCOMMAND ioctl"); error = 1; break; } if ((ccb.ccb_h.status != CAM_REQ_CMP) || ((ccb.cdm.status != CAM_DEV_MATCH_LAST) && (ccb.cdm.status != CAM_DEV_MATCH_MORE))) { warnx("got CAM error %#x, CDM error %d\n", ccb.ccb_h.status, ccb.cdm.status); error = 1; break; } for (i = 0; i < ccb.cdm.num_matches; i++) { switch (ccb.cdm.matches[i].type) { case DEV_MATCH_BUS: { struct bus_match_result *bus_result; /* * Only print the bus information if the * user turns on the verbose flag. */ if ((busonly == 0) && (arglist & CAM_ARG_VERBOSE) == 0) break; bus_result = &ccb.cdm.matches[i].result.bus_result; if (need_close) { fprintf(stdout, ")\n"); need_close = 0; } fprintf(stdout, "scbus%d on %s%d bus %d%s\n", bus_result->path_id, bus_result->dev_name, bus_result->unit_number, bus_result->bus_id, (busonly ? "" : ":")); break; } case DEV_MATCH_DEVICE: { struct device_match_result *dev_result; char vendor[16], product[48], revision[16]; char fw[5], tmpstr[256]; if (busonly == 1) break; dev_result = &ccb.cdm.matches[i].result.device_result; if ((dev_result->flags & DEV_RESULT_UNCONFIGURED) && ((arglist & CAM_ARG_VERBOSE) == 0)) { skip_device = 1; break; } else skip_device = 0; if (dev_result->protocol == PROTO_SCSI) { cam_strvis(vendor, dev_result->inq_data.vendor, sizeof(dev_result->inq_data.vendor), sizeof(vendor)); cam_strvis(product, dev_result->inq_data.product, sizeof(dev_result->inq_data.product), sizeof(product)); cam_strvis(revision, dev_result->inq_data.revision, sizeof(dev_result->inq_data.revision), sizeof(revision)); sprintf(tmpstr, "<%s %s %s>", vendor, product, revision); } else if (dev_result->protocol == PROTO_ATA || dev_result->protocol == PROTO_SATAPM) { cam_strvis(product, dev_result->ident_data.model, sizeof(dev_result->ident_data.model), sizeof(product)); cam_strvis(revision, dev_result->ident_data.revision, sizeof(dev_result->ident_data.revision), sizeof(revision)); sprintf(tmpstr, "<%s %s>", product, revision); } else if (dev_result->protocol == PROTO_SEMB) { struct sep_identify_data *sid; sid = (struct sep_identify_data *) &dev_result->ident_data; cam_strvis(vendor, sid->vendor_id, sizeof(sid->vendor_id), sizeof(vendor)); cam_strvis(product, sid->product_id, sizeof(sid->product_id), sizeof(product)); cam_strvis(revision, sid->product_rev, sizeof(sid->product_rev), sizeof(revision)); cam_strvis(fw, sid->firmware_rev, sizeof(sid->firmware_rev), sizeof(fw)); sprintf(tmpstr, "<%s %s %s %s>", vendor, product, revision, fw); } else { sprintf(tmpstr, "<>"); } if (need_close) { fprintf(stdout, ")\n"); need_close = 0; } fprintf(stdout, "%-33s at scbus%d " "target %d lun %jx (", tmpstr, dev_result->path_id, dev_result->target_id, (uintmax_t)dev_result->target_lun); need_close = 1; break; } case DEV_MATCH_PERIPH: { struct periph_match_result *periph_result; periph_result = &ccb.cdm.matches[i].result.periph_result; if (busonly || skip_device != 0) break; if (need_close > 1) fprintf(stdout, ","); fprintf(stdout, "%s%d", periph_result->periph_name, periph_result->unit_number); need_close++; break; } default: fprintf(stdout, "unknown match type\n"); break; } } } while ((ccb.ccb_h.status == CAM_REQ_CMP) && (ccb.cdm.status == CAM_DEV_MATCH_MORE)); if (need_close) fprintf(stdout, ")\n"); close(fd); return(error); } #ifndef MINIMALISTIC static int testunitready(struct cam_device *device, int retry_count, int timeout, int quiet) { int error = 0; union ccb *ccb; ccb = cam_getccb(device); scsi_test_unit_ready(&ccb->csio, /* retries */ retry_count, /* cbfcnp */ NULL, /* tag_action */ MSG_SIMPLE_Q_TAG, /* sense_len */ SSD_FULL_SIZE, /* timeout */ timeout ? timeout : 5000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(device, ccb) < 0) { if (quiet == 0) perror("error sending test unit ready"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } cam_freeccb(ccb); return(1); } if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { if (quiet == 0) fprintf(stdout, "Unit is ready\n"); } else { if (quiet == 0) fprintf(stdout, "Unit is not ready\n"); error = 1; if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } } cam_freeccb(ccb); return(error); } static int scsistart(struct cam_device *device, int startstop, int loadeject, int retry_count, int timeout) { union ccb *ccb; int error = 0; ccb = cam_getccb(device); /* * If we're stopping, send an ordered tag so the drive in question * will finish any previously queued writes before stopping. If * the device isn't capable of tagged queueing, or if tagged * queueing is turned off, the tag action is a no-op. */ scsi_start_stop(&ccb->csio, /* retries */ retry_count, /* cbfcnp */ NULL, /* tag_action */ startstop ? MSG_SIMPLE_Q_TAG : MSG_ORDERED_Q_TAG, /* start/stop */ startstop, /* load_eject */ loadeject, /* immediate */ 0, /* sense_len */ SSD_FULL_SIZE, /* timeout */ timeout ? timeout : 120000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(device, ccb) < 0) { perror("error sending start unit"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } cam_freeccb(ccb); return(1); } if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) if (startstop) { fprintf(stdout, "Unit started successfully"); if (loadeject) fprintf(stdout,", Media loaded\n"); else fprintf(stdout,"\n"); } else { fprintf(stdout, "Unit stopped successfully"); if (loadeject) fprintf(stdout, ", Media ejected\n"); else fprintf(stdout, "\n"); } else { error = 1; if (startstop) fprintf(stdout, "Error received from start unit command\n"); else fprintf(stdout, "Error received from stop unit command\n"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } } cam_freeccb(ccb); return(error); } int scsidoinquiry(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { int c; int error = 0; while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c) { case 'D': arglist |= CAM_ARG_GET_STDINQ; break; case 'R': arglist |= CAM_ARG_GET_XFERRATE; break; case 'S': arglist |= CAM_ARG_GET_SERIAL; break; default: break; } } /* * If the user didn't specify any inquiry options, he wants all of * them. */ if ((arglist & CAM_ARG_INQ_MASK) == 0) arglist |= CAM_ARG_INQ_MASK; if (arglist & CAM_ARG_GET_STDINQ) error = scsiinquiry(device, retry_count, timeout); if (error != 0) return(error); if (arglist & CAM_ARG_GET_SERIAL) scsiserial(device, retry_count, timeout); if (error != 0) return(error); if (arglist & CAM_ARG_GET_XFERRATE) error = camxferrate(device); return(error); } static int scsiinquiry(struct cam_device *device, int retry_count, int timeout) { union ccb *ccb; struct scsi_inquiry_data *inq_buf; int error = 0; ccb = cam_getccb(device); if (ccb == NULL) { warnx("couldn't allocate CCB"); return(1); } /* cam_getccb cleans up the header, caller has to zero the payload */ bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); inq_buf = (struct scsi_inquiry_data *)malloc( sizeof(struct scsi_inquiry_data)); if (inq_buf == NULL) { cam_freeccb(ccb); warnx("can't malloc memory for inquiry\n"); return(1); } bzero(inq_buf, sizeof(*inq_buf)); /* * Note that although the size of the inquiry buffer is the full * 256 bytes specified in the SCSI spec, we only tell the device * that we have allocated SHORT_INQUIRY_LENGTH bytes. There are * two reasons for this: * * - The SCSI spec says that when a length field is only 1 byte, * a value of 0 will be interpreted as 256. Therefore * scsi_inquiry() will convert an inq_len (which is passed in as * a u_int32_t, but the field in the CDB is only 1 byte) of 256 * to 0. Evidently, very few devices meet the spec in that * regard. Some devices, like many Seagate disks, take the 0 as * 0, and don't return any data. One Pioneer DVD-R drive * returns more data than the command asked for. * * So, since there are numerous devices that just don't work * right with the full inquiry size, we don't send the full size. * * - The second reason not to use the full inquiry data length is * that we don't need it here. The only reason we issue a * standard inquiry is to get the vendor name, device name, * and revision so scsi_print_inquiry() can print them. * * If, at some point in the future, more inquiry data is needed for * some reason, this code should use a procedure similar to the * probe code. i.e., issue a short inquiry, and determine from * the additional length passed back from the device how much * inquiry data the device supports. Once the amount the device * supports is determined, issue an inquiry for that amount and no * more. * * KDM, 2/18/2000 */ scsi_inquiry(&ccb->csio, /* retries */ retry_count, /* cbfcnp */ NULL, /* tag_action */ MSG_SIMPLE_Q_TAG, /* inq_buf */ (u_int8_t *)inq_buf, /* inq_len */ SHORT_INQUIRY_LENGTH, /* evpd */ 0, /* page_code */ 0, /* sense_len */ SSD_FULL_SIZE, /* timeout */ timeout ? timeout : 5000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(device, ccb) < 0) { perror("error sending SCSI inquiry"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } cam_freeccb(ccb); return(1); } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { error = 1; if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } } cam_freeccb(ccb); if (error != 0) { free(inq_buf); return(error); } fprintf(stdout, "%s%d: ", device->device_name, device->dev_unit_num); scsi_print_inquiry(inq_buf); free(inq_buf); return(0); } static int scsiserial(struct cam_device *device, int retry_count, int timeout) { union ccb *ccb; struct scsi_vpd_unit_serial_number *serial_buf; char serial_num[SVPD_SERIAL_NUM_SIZE + 1]; int error = 0; ccb = cam_getccb(device); if (ccb == NULL) { warnx("couldn't allocate CCB"); return(1); } /* cam_getccb cleans up the header, caller has to zero the payload */ bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); serial_buf = (struct scsi_vpd_unit_serial_number *) malloc(sizeof(*serial_buf)); if (serial_buf == NULL) { cam_freeccb(ccb); warnx("can't malloc memory for serial number"); return(1); } scsi_inquiry(&ccb->csio, /*retries*/ retry_count, /*cbfcnp*/ NULL, /* tag_action */ MSG_SIMPLE_Q_TAG, /* inq_buf */ (u_int8_t *)serial_buf, /* inq_len */ sizeof(*serial_buf), /* evpd */ 1, /* page_code */ SVPD_UNIT_SERIAL_NUMBER, /* sense_len */ SSD_FULL_SIZE, /* timeout */ timeout ? timeout : 5000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(device, ccb) < 0) { warn("error getting serial number"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } cam_freeccb(ccb); free(serial_buf); return(1); } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { error = 1; if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } } cam_freeccb(ccb); if (error != 0) { free(serial_buf); return(error); } bcopy(serial_buf->serial_num, serial_num, serial_buf->length); serial_num[serial_buf->length] = '\0'; if ((arglist & CAM_ARG_GET_STDINQ) || (arglist & CAM_ARG_GET_XFERRATE)) fprintf(stdout, "%s%d: Serial Number ", device->device_name, device->dev_unit_num); fprintf(stdout, "%.60s\n", serial_num); free(serial_buf); return(0); } static int camxferrate(struct cam_device *device) { struct ccb_pathinq cpi; u_int32_t freq = 0; u_int32_t speed = 0; union ccb *ccb; u_int mb; int retval = 0; if ((retval = get_cpi(device, &cpi)) != 0) return (1); ccb = cam_getccb(device); if (ccb == NULL) { warnx("couldn't allocate CCB"); return(1); } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_trans_settings) - sizeof(struct ccb_hdr)); ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS; ccb->cts.type = CTS_TYPE_CURRENT_SETTINGS; if (((retval = cam_send_ccb(device, ccb)) < 0) || ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) { const char error_string[] = "error getting transfer settings"; if (retval < 0) warn(error_string); else warnx(error_string); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto xferrate_bailout; } speed = cpi.base_transfer_speed; freq = 0; if (ccb->cts.transport == XPORT_SPI) { struct ccb_trans_settings_spi *spi = &ccb->cts.xport_specific.spi; if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) { freq = scsi_calc_syncsrate(spi->sync_period); speed = freq; } if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) { speed *= (0x01 << spi->bus_width); } } else if (ccb->cts.transport == XPORT_FC) { struct ccb_trans_settings_fc *fc = &ccb->cts.xport_specific.fc; if (fc->valid & CTS_FC_VALID_SPEED) speed = fc->bitrate; } else if (ccb->cts.transport == XPORT_SAS) { struct ccb_trans_settings_sas *sas = &ccb->cts.xport_specific.sas; if (sas->valid & CTS_SAS_VALID_SPEED) speed = sas->bitrate; } else if (ccb->cts.transport == XPORT_ATA) { struct ccb_trans_settings_pata *pata = &ccb->cts.xport_specific.ata; if (pata->valid & CTS_ATA_VALID_MODE) speed = ata_mode2speed(pata->mode); } else if (ccb->cts.transport == XPORT_SATA) { struct ccb_trans_settings_sata *sata = &ccb->cts.xport_specific.sata; if (sata->valid & CTS_SATA_VALID_REVISION) speed = ata_revision2speed(sata->revision); } mb = speed / 1000; if (mb > 0) { fprintf(stdout, "%s%d: %d.%03dMB/s transfers", device->device_name, device->dev_unit_num, mb, speed % 1000); } else { fprintf(stdout, "%s%d: %dKB/s transfers", device->device_name, device->dev_unit_num, speed); } if (ccb->cts.transport == XPORT_SPI) { struct ccb_trans_settings_spi *spi = &ccb->cts.xport_specific.spi; if (((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) && (spi->sync_offset != 0)) fprintf(stdout, " (%d.%03dMHz, offset %d", freq / 1000, freq % 1000, spi->sync_offset); if (((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) && (spi->bus_width > 0)) { if (((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) && (spi->sync_offset != 0)) { fprintf(stdout, ", "); } else { fprintf(stdout, " ("); } fprintf(stdout, "%dbit)", 8 * (0x01 << spi->bus_width)); } else if (((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) && (spi->sync_offset != 0)) { fprintf(stdout, ")"); } } else if (ccb->cts.transport == XPORT_ATA) { struct ccb_trans_settings_pata *pata = &ccb->cts.xport_specific.ata; printf(" ("); if (pata->valid & CTS_ATA_VALID_MODE) printf("%s, ", ata_mode2string(pata->mode)); if ((pata->valid & CTS_ATA_VALID_ATAPI) && pata->atapi != 0) printf("ATAPI %dbytes, ", pata->atapi); if (pata->valid & CTS_ATA_VALID_BYTECOUNT) printf("PIO %dbytes", pata->bytecount); printf(")"); } else if (ccb->cts.transport == XPORT_SATA) { struct ccb_trans_settings_sata *sata = &ccb->cts.xport_specific.sata; printf(" ("); if (sata->valid & CTS_SATA_VALID_REVISION) printf("SATA %d.x, ", sata->revision); else printf("SATA, "); if (sata->valid & CTS_SATA_VALID_MODE) printf("%s, ", ata_mode2string(sata->mode)); if ((sata->valid & CTS_SATA_VALID_ATAPI) && sata->atapi != 0) printf("ATAPI %dbytes, ", sata->atapi); if (sata->valid & CTS_SATA_VALID_BYTECOUNT) printf("PIO %dbytes", sata->bytecount); printf(")"); } if (ccb->cts.protocol == PROTO_SCSI) { struct ccb_trans_settings_scsi *scsi = &ccb->cts.proto_specific.scsi; if (scsi->valid & CTS_SCSI_VALID_TQ) { if (scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) { fprintf(stdout, ", Command Queueing Enabled"); } } } fprintf(stdout, "\n"); xferrate_bailout: cam_freeccb(ccb); return(retval); } static void atahpa_print(struct ata_params *parm, u_int64_t hpasize, int header) { u_int32_t lbasize = (u_int32_t)parm->lba_size_1 | ((u_int32_t)parm->lba_size_2 << 16); u_int64_t lbasize48 = ((u_int64_t)parm->lba_size48_1) | ((u_int64_t)parm->lba_size48_2 << 16) | ((u_int64_t)parm->lba_size48_3 << 32) | ((u_int64_t)parm->lba_size48_4 << 48); if (header) { printf("\nFeature " "Support Enabled Value\n"); } printf("Host Protected Area (HPA) "); if (parm->support.command1 & ATA_SUPPORT_PROTECTED) { u_int64_t lba = lbasize48 ? lbasize48 : lbasize; printf("yes %s %ju/%ju\n", (hpasize > lba) ? "yes" : "no ", lba, hpasize); printf("HPA - Security "); if (parm->support.command1 & ATA_SUPPORT_MAXSECURITY) printf("yes\n"); else printf("no\n"); } else { printf("no\n"); } } static int atasata(struct ata_params *parm) { if (parm->satacapabilities != 0xffff && parm->satacapabilities != 0x0000) return 1; return 0; } static void atacapprint(struct ata_params *parm) { u_int32_t lbasize = (u_int32_t)parm->lba_size_1 | ((u_int32_t)parm->lba_size_2 << 16); u_int64_t lbasize48 = ((u_int64_t)parm->lba_size48_1) | ((u_int64_t)parm->lba_size48_2 << 16) | ((u_int64_t)parm->lba_size48_3 << 32) | ((u_int64_t)parm->lba_size48_4 << 48); printf("\n"); printf("protocol "); printf("ATA/ATAPI-%d", ata_version(parm->version_major)); if (parm->satacapabilities && parm->satacapabilities != 0xffff) { if (parm->satacapabilities & ATA_SATA_GEN3) printf(" SATA 3.x\n"); else if (parm->satacapabilities & ATA_SATA_GEN2) printf(" SATA 2.x\n"); else if (parm->satacapabilities & ATA_SATA_GEN1) printf(" SATA 1.x\n"); else printf(" SATA\n"); } else printf("\n"); printf("device model %.40s\n", parm->model); printf("firmware revision %.8s\n", parm->revision); printf("serial number %.20s\n", parm->serial); if (parm->enabled.extension & ATA_SUPPORT_64BITWWN) { printf("WWN %04x%04x%04x%04x\n", parm->wwn[0], parm->wwn[1], parm->wwn[2], parm->wwn[3]); } if (parm->enabled.extension & ATA_SUPPORT_MEDIASN) { printf("media serial number %.30s\n", parm->media_serial); } printf("cylinders %d\n", parm->cylinders); printf("heads %d\n", parm->heads); printf("sectors/track %d\n", parm->sectors); printf("sector size logical %u, physical %lu, offset %lu\n", ata_logical_sector_size(parm), (unsigned long)ata_physical_sector_size(parm), (unsigned long)ata_logical_sector_offset(parm)); if (parm->config == ATA_PROTO_CFA || (parm->support.command2 & ATA_SUPPORT_CFA)) printf("CFA supported\n"); printf("LBA%ssupported ", parm->capabilities1 & ATA_SUPPORT_LBA ? " " : " not "); if (lbasize) printf("%d sectors\n", lbasize); else printf("\n"); printf("LBA48%ssupported ", parm->support.command2 & ATA_SUPPORT_ADDRESS48 ? " " : " not "); if (lbasize48) printf("%ju sectors\n", (uintmax_t)lbasize48); else printf("\n"); printf("PIO supported PIO"); switch (ata_max_pmode(parm)) { case ATA_PIO4: printf("4"); break; case ATA_PIO3: printf("3"); break; case ATA_PIO2: printf("2"); break; case ATA_PIO1: printf("1"); break; default: printf("0"); } if ((parm->capabilities1 & ATA_SUPPORT_IORDY) == 0) printf(" w/o IORDY"); printf("\n"); printf("DMA%ssupported ", parm->capabilities1 & ATA_SUPPORT_DMA ? " " : " not "); if (parm->capabilities1 & ATA_SUPPORT_DMA) { if (parm->mwdmamodes & 0xff) { printf("WDMA"); if (parm->mwdmamodes & 0x04) printf("2"); else if (parm->mwdmamodes & 0x02) printf("1"); else if (parm->mwdmamodes & 0x01) printf("0"); printf(" "); } if ((parm->atavalid & ATA_FLAG_88) && (parm->udmamodes & 0xff)) { printf("UDMA"); if (parm->udmamodes & 0x40) printf("6"); else if (parm->udmamodes & 0x20) printf("5"); else if (parm->udmamodes & 0x10) printf("4"); else if (parm->udmamodes & 0x08) printf("3"); else if (parm->udmamodes & 0x04) printf("2"); else if (parm->udmamodes & 0x02) printf("1"); else if (parm->udmamodes & 0x01) printf("0"); printf(" "); } } printf("\n"); if (parm->media_rotation_rate == 1) { printf("media RPM non-rotating\n"); } else if (parm->media_rotation_rate >= 0x0401 && parm->media_rotation_rate <= 0xFFFE) { printf("media RPM %d\n", parm->media_rotation_rate); } printf("\nFeature " "Support Enabled Value Vendor\n"); printf("read ahead %s %s\n", parm->support.command1 & ATA_SUPPORT_LOOKAHEAD ? "yes" : "no", parm->enabled.command1 & ATA_SUPPORT_LOOKAHEAD ? "yes" : "no"); printf("write cache %s %s\n", parm->support.command1 & ATA_SUPPORT_WRITECACHE ? "yes" : "no", parm->enabled.command1 & ATA_SUPPORT_WRITECACHE ? "yes" : "no"); printf("flush cache %s %s\n", parm->support.command2 & ATA_SUPPORT_FLUSHCACHE ? "yes" : "no", parm->enabled.command2 & ATA_SUPPORT_FLUSHCACHE ? "yes" : "no"); printf("overlap %s\n", parm->capabilities1 & ATA_SUPPORT_OVERLAP ? "yes" : "no"); printf("Tagged Command Queuing (TCQ) %s %s", parm->support.command2 & ATA_SUPPORT_QUEUED ? "yes" : "no", parm->enabled.command2 & ATA_SUPPORT_QUEUED ? "yes" : "no"); if (parm->support.command2 & ATA_SUPPORT_QUEUED) { printf(" %d tags\n", ATA_QUEUE_LEN(parm->queue) + 1); } else printf("\n"); printf("Native Command Queuing (NCQ) "); if (parm->satacapabilities != 0xffff && (parm->satacapabilities & ATA_SUPPORT_NCQ)) { printf("yes %d tags\n", ATA_QUEUE_LEN(parm->queue) + 1); } else printf("no\n"); printf("NCQ Queue Management %s\n", atasata(parm) && parm->satacapabilities2 & ATA_SUPPORT_NCQ_QMANAGEMENT ? "yes" : "no"); printf("NCQ Streaming %s\n", atasata(parm) && parm->satacapabilities2 & ATA_SUPPORT_NCQ_STREAM ? "yes" : "no"); printf("Receive & Send FPDMA Queued %s\n", atasata(parm) && parm->satacapabilities2 & ATA_SUPPORT_RCVSND_FPDMA_QUEUED ? "yes" : "no"); printf("SMART %s %s\n", parm->support.command1 & ATA_SUPPORT_SMART ? "yes" : "no", parm->enabled.command1 & ATA_SUPPORT_SMART ? "yes" : "no"); printf("microcode download %s %s\n", parm->support.command2 & ATA_SUPPORT_MICROCODE ? "yes" : "no", parm->enabled.command2 & ATA_SUPPORT_MICROCODE ? "yes" : "no"); printf("security %s %s\n", parm->support.command1 & ATA_SUPPORT_SECURITY ? "yes" : "no", parm->enabled.command1 & ATA_SUPPORT_SECURITY ? "yes" : "no"); printf("power management %s %s\n", parm->support.command1 & ATA_SUPPORT_POWERMGT ? "yes" : "no", parm->enabled.command1 & ATA_SUPPORT_POWERMGT ? "yes" : "no"); printf("advanced power management %s %s", parm->support.command2 & ATA_SUPPORT_APM ? "yes" : "no", parm->enabled.command2 & ATA_SUPPORT_APM ? "yes" : "no"); if (parm->support.command2 & ATA_SUPPORT_APM) { printf(" %d/0x%02X\n", - parm->apm_value, parm->apm_value); + parm->apm_value & 0xff, parm->apm_value & 0xff); } else printf("\n"); printf("automatic acoustic management %s %s", parm->support.command2 & ATA_SUPPORT_AUTOACOUSTIC ? "yes" :"no", parm->enabled.command2 & ATA_SUPPORT_AUTOACOUSTIC ? "yes" :"no"); if (parm->support.command2 & ATA_SUPPORT_AUTOACOUSTIC) { printf(" %d/0x%02X %d/0x%02X\n", ATA_ACOUSTIC_CURRENT(parm->acoustic), ATA_ACOUSTIC_CURRENT(parm->acoustic), ATA_ACOUSTIC_VENDOR(parm->acoustic), ATA_ACOUSTIC_VENDOR(parm->acoustic)); } else printf("\n"); printf("media status notification %s %s\n", parm->support.command2 & ATA_SUPPORT_NOTIFY ? "yes" : "no", parm->enabled.command2 & ATA_SUPPORT_NOTIFY ? "yes" : "no"); printf("power-up in Standby %s %s\n", parm->support.command2 & ATA_SUPPORT_STANDBY ? "yes" : "no", parm->enabled.command2 & ATA_SUPPORT_STANDBY ? "yes" : "no"); printf("write-read-verify %s %s", parm->support2 & ATA_SUPPORT_WRITEREADVERIFY ? "yes" : "no", parm->enabled2 & ATA_SUPPORT_WRITEREADVERIFY ? "yes" : "no"); if (parm->support2 & ATA_SUPPORT_WRITEREADVERIFY) { printf(" %d/0x%x\n", parm->wrv_mode, parm->wrv_mode); } else printf("\n"); printf("unload %s %s\n", parm->support.extension & ATA_SUPPORT_UNLOAD ? "yes" : "no", parm->enabled.extension & ATA_SUPPORT_UNLOAD ? "yes" : "no"); printf("general purpose logging %s %s\n", parm->support.extension & ATA_SUPPORT_GENLOG ? "yes" : "no", parm->enabled.extension & ATA_SUPPORT_GENLOG ? "yes" : "no"); printf("free-fall %s %s\n", parm->support2 & ATA_SUPPORT_FREEFALL ? "yes" : "no", parm->enabled2 & ATA_SUPPORT_FREEFALL ? "yes" : "no"); printf("Data Set Management (DSM/TRIM) "); if (parm->support_dsm & ATA_SUPPORT_DSM_TRIM) { printf("yes\n"); printf("DSM - max 512byte blocks "); if (parm->max_dsm_blocks == 0x00) printf("yes not specified\n"); else printf("yes %d\n", parm->max_dsm_blocks); printf("DSM - deterministic read "); if (parm->support3 & ATA_SUPPORT_DRAT) { if (parm->support3 & ATA_SUPPORT_RZAT) printf("yes zeroed\n"); else printf("yes any value\n"); } else { printf("no\n"); } } else { printf("no\n"); } } static int scsi_cam_pass_16_send(struct cam_device *device, union ccb *ccb, int quiet) { struct ata_pass_16 *ata_pass_16; struct ata_cmd ata_cmd; ata_pass_16 = (struct ata_pass_16 *)ccb->csio.cdb_io.cdb_bytes; ata_cmd.command = ata_pass_16->command; ata_cmd.control = ata_pass_16->control; ata_cmd.features = ata_pass_16->features; if (arglist & CAM_ARG_VERBOSE) { warnx("sending ATA %s via pass_16 with timeout of %u msecs", ata_op_string(&ata_cmd), ccb->csio.ccb_h.timeout); } /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(device, ccb) < 0) { if (quiet != 1 || arglist & CAM_ARG_VERBOSE) { warn("error sending ATA %s via pass_16", ata_op_string(&ata_cmd)); } if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } return (1); } if (!(ata_pass_16->flags & AP_FLAG_CHK_COND) && (ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { if (quiet != 1 || arglist & CAM_ARG_VERBOSE) { warnx("ATA %s via pass_16 failed", ata_op_string(&ata_cmd)); } if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } return (1); } return (0); } static int ata_cam_send(struct cam_device *device, union ccb *ccb, int quiet) { if (arglist & CAM_ARG_VERBOSE) { warnx("sending ATA %s with timeout of %u msecs", ata_op_string(&(ccb->ataio.cmd)), ccb->ataio.ccb_h.timeout); } /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(device, ccb) < 0) { if (quiet != 1 || arglist & CAM_ARG_VERBOSE) { warn("error sending ATA %s", ata_op_string(&(ccb->ataio.cmd))); } if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } return (1); } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { if (quiet != 1 || arglist & CAM_ARG_VERBOSE) { warnx("ATA %s failed: %d", ata_op_string(&(ccb->ataio.cmd)), quiet); } if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } return (1); } return (0); } static int ata_do_pass_16(struct cam_device *device, union ccb *ccb, int retries, u_int32_t flags, u_int8_t protocol, u_int8_t ata_flags, u_int8_t tag_action, u_int8_t command, u_int8_t features, u_int64_t lba, u_int8_t sector_count, u_int8_t *data_ptr, u_int16_t dxfer_len, int timeout, int quiet) { if (data_ptr != NULL) { ata_flags |= AP_FLAG_BYT_BLOK_BYTES | AP_FLAG_TLEN_SECT_CNT; if (flags & CAM_DIR_OUT) ata_flags |= AP_FLAG_TDIR_TO_DEV; else ata_flags |= AP_FLAG_TDIR_FROM_DEV; } else { ata_flags |= AP_FLAG_TLEN_NO_DATA; } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); scsi_ata_pass_16(&ccb->csio, retries, NULL, flags, tag_action, protocol, ata_flags, features, sector_count, lba, command, /*control*/0, data_ptr, dxfer_len, /*sense_len*/SSD_FULL_SIZE, timeout); return scsi_cam_pass_16_send(device, ccb, quiet); } static int ata_try_pass_16(struct cam_device *device) { struct ccb_pathinq cpi; if (get_cpi(device, &cpi) != 0) { warnx("couldn't get CPI"); return (-1); } if (cpi.protocol == PROTO_SCSI) { /* possibly compatible with pass_16 */ return (1); } /* likely not compatible with pass_16 */ return (0); } static int ata_do_28bit_cmd(struct cam_device *device, union ccb *ccb, int retries, u_int32_t flags, u_int8_t protocol, u_int8_t tag_action, u_int8_t command, u_int8_t features, u_int32_t lba, u_int8_t sector_count, u_int8_t *data_ptr, u_int16_t dxfer_len, int timeout, int quiet) { switch (ata_try_pass_16(device)) { case -1: return (1); case 1: /* Try using SCSI Passthrough */ return ata_do_pass_16(device, ccb, retries, flags, protocol, 0, tag_action, command, features, lba, sector_count, data_ptr, dxfer_len, timeout, quiet); } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_ataio) - sizeof(struct ccb_hdr)); cam_fill_ataio(&ccb->ataio, retries, NULL, flags, tag_action, data_ptr, dxfer_len, timeout); ata_28bit_cmd(&ccb->ataio, command, features, lba, sector_count); return ata_cam_send(device, ccb, quiet); } static int ata_do_cmd(struct cam_device *device, union ccb *ccb, int retries, u_int32_t flags, u_int8_t protocol, u_int8_t ata_flags, u_int8_t tag_action, u_int8_t command, u_int8_t features, u_int64_t lba, u_int8_t sector_count, u_int8_t *data_ptr, u_int16_t dxfer_len, int timeout, int force48bit) { int retval; retval = ata_try_pass_16(device); if (retval == -1) return (1); if (retval == 1) { int error; /* Try using SCSI Passthrough */ error = ata_do_pass_16(device, ccb, retries, flags, protocol, ata_flags, tag_action, command, features, lba, sector_count, data_ptr, dxfer_len, timeout, 0); if (ata_flags & AP_FLAG_CHK_COND) { /* Decode ata_res from sense data */ struct ata_res_pass16 *res_pass16; struct ata_res *res; u_int i; u_int16_t *ptr; /* sense_data is 4 byte aligned */ ptr = (uint16_t*)(uintptr_t)&ccb->csio.sense_data; for (i = 0; i < sizeof(*res_pass16) / 2; i++) ptr[i] = le16toh(ptr[i]); /* sense_data is 4 byte aligned */ res_pass16 = (struct ata_res_pass16 *)(uintptr_t) &ccb->csio.sense_data; res = &ccb->ataio.res; res->flags = res_pass16->flags; res->status = res_pass16->status; res->error = res_pass16->error; res->lba_low = res_pass16->lba_low; res->lba_mid = res_pass16->lba_mid; res->lba_high = res_pass16->lba_high; res->device = res_pass16->device; res->lba_low_exp = res_pass16->lba_low_exp; res->lba_mid_exp = res_pass16->lba_mid_exp; res->lba_high_exp = res_pass16->lba_high_exp; res->sector_count = res_pass16->sector_count; res->sector_count_exp = res_pass16->sector_count_exp; } return (error); } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_ataio) - sizeof(struct ccb_hdr)); cam_fill_ataio(&ccb->ataio, retries, NULL, flags, tag_action, data_ptr, dxfer_len, timeout); if (force48bit || lba > ATA_MAX_28BIT_LBA) ata_48bit_cmd(&ccb->ataio, command, features, lba, sector_count); else ata_28bit_cmd(&ccb->ataio, command, features, lba, sector_count); if (ata_flags & AP_FLAG_CHK_COND) ccb->ataio.cmd.flags |= CAM_ATAIO_NEEDRESULT; return ata_cam_send(device, ccb, 0); } static void dump_data(uint16_t *ptr, uint32_t len) { u_int i; for (i = 0; i < len / 2; i++) { if ((i % 8) == 0) printf(" %3d: ", i); printf("%04hx ", ptr[i]); if ((i % 8) == 7) printf("\n"); } if ((i % 8) != 7) printf("\n"); } static int atahpa_proc_resp(struct cam_device *device, union ccb *ccb, int is48bit, u_int64_t *hpasize) { struct ata_res *res; res = &ccb->ataio.res; if (res->status & ATA_STATUS_ERROR) { if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); printf("error = 0x%02x, sector_count = 0x%04x, " "device = 0x%02x, status = 0x%02x\n", res->error, res->sector_count, res->device, res->status); } if (res->error & ATA_ERROR_ID_NOT_FOUND) { warnx("Max address has already been set since " "last power-on or hardware reset"); } return (1); } if (arglist & CAM_ARG_VERBOSE) { fprintf(stdout, "%s%d: Raw native max data:\n", device->device_name, device->dev_unit_num); /* res is 4 byte aligned */ dump_data((uint16_t*)(uintptr_t)res, sizeof(struct ata_res)); printf("error = 0x%02x, sector_count = 0x%04x, device = 0x%02x, " "status = 0x%02x\n", res->error, res->sector_count, res->device, res->status); } if (hpasize != NULL) { if (is48bit) { *hpasize = (((u_int64_t)((res->lba_high_exp << 16) | (res->lba_mid_exp << 8) | res->lba_low_exp) << 24) | ((res->lba_high << 16) | (res->lba_mid << 8) | res->lba_low)) + 1; } else { *hpasize = (((res->device & 0x0f) << 24) | (res->lba_high << 16) | (res->lba_mid << 8) | res->lba_low) + 1; } } return (0); } static int ata_read_native_max(struct cam_device *device, int retry_count, u_int32_t timeout, union ccb *ccb, struct ata_params *parm, u_int64_t *hpasize) { int error; u_int cmd, is48bit; u_int8_t protocol; is48bit = parm->support.command2 & ATA_SUPPORT_ADDRESS48; protocol = AP_PROTO_NON_DATA; if (is48bit) { cmd = ATA_READ_NATIVE_MAX_ADDRESS48; protocol |= AP_EXTEND; } else { cmd = ATA_READ_NATIVE_MAX_ADDRESS; } error = ata_do_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_NONE, /*protocol*/protocol, /*ata_flags*/AP_FLAG_CHK_COND, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/cmd, /*features*/0, /*lba*/0, /*sector_count*/0, /*data_ptr*/NULL, /*dxfer_len*/0, timeout ? timeout : 1000, is48bit); if (error) return (error); return atahpa_proc_resp(device, ccb, is48bit, hpasize); } static int atahpa_set_max(struct cam_device *device, int retry_count, u_int32_t timeout, union ccb *ccb, int is48bit, u_int64_t maxsize, int persist) { int error; u_int cmd; u_int8_t protocol; protocol = AP_PROTO_NON_DATA; if (is48bit) { cmd = ATA_SET_MAX_ADDRESS48; protocol |= AP_EXTEND; } else { cmd = ATA_SET_MAX_ADDRESS; } /* lba's are zero indexed so the max lba is requested max - 1 */ if (maxsize) maxsize--; error = ata_do_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_NONE, /*protocol*/protocol, /*ata_flags*/AP_FLAG_CHK_COND, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/cmd, /*features*/ATA_HPA_FEAT_MAX_ADDR, /*lba*/maxsize, /*sector_count*/persist, /*data_ptr*/NULL, /*dxfer_len*/0, timeout ? timeout : 1000, is48bit); if (error) return (error); return atahpa_proc_resp(device, ccb, is48bit, NULL); } static int atahpa_password(struct cam_device *device, int retry_count, u_int32_t timeout, union ccb *ccb, int is48bit, struct ata_set_max_pwd *pwd) { int error; u_int cmd; u_int8_t protocol; protocol = AP_PROTO_PIO_OUT; cmd = (is48bit) ? ATA_SET_MAX_ADDRESS48 : ATA_SET_MAX_ADDRESS; error = ata_do_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_OUT, /*protocol*/protocol, /*ata_flags*/AP_FLAG_CHK_COND, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/cmd, /*features*/ATA_HPA_FEAT_SET_PWD, /*lba*/0, /*sector_count*/0, /*data_ptr*/(u_int8_t*)pwd, /*dxfer_len*/sizeof(struct ata_set_max_pwd), timeout ? timeout : 1000, is48bit); if (error) return (error); return atahpa_proc_resp(device, ccb, is48bit, NULL); } static int atahpa_lock(struct cam_device *device, int retry_count, u_int32_t timeout, union ccb *ccb, int is48bit) { int error; u_int cmd; u_int8_t protocol; protocol = AP_PROTO_NON_DATA; cmd = (is48bit) ? ATA_SET_MAX_ADDRESS48 : ATA_SET_MAX_ADDRESS; error = ata_do_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_NONE, /*protocol*/protocol, /*ata_flags*/AP_FLAG_CHK_COND, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/cmd, /*features*/ATA_HPA_FEAT_LOCK, /*lba*/0, /*sector_count*/0, /*data_ptr*/NULL, /*dxfer_len*/0, timeout ? timeout : 1000, is48bit); if (error) return (error); return atahpa_proc_resp(device, ccb, is48bit, NULL); } static int atahpa_unlock(struct cam_device *device, int retry_count, u_int32_t timeout, union ccb *ccb, int is48bit, struct ata_set_max_pwd *pwd) { int error; u_int cmd; u_int8_t protocol; protocol = AP_PROTO_PIO_OUT; cmd = (is48bit) ? ATA_SET_MAX_ADDRESS48 : ATA_SET_MAX_ADDRESS; error = ata_do_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_OUT, /*protocol*/protocol, /*ata_flags*/AP_FLAG_CHK_COND, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/cmd, /*features*/ATA_HPA_FEAT_UNLOCK, /*lba*/0, /*sector_count*/0, /*data_ptr*/(u_int8_t*)pwd, /*dxfer_len*/sizeof(struct ata_set_max_pwd), timeout ? timeout : 1000, is48bit); if (error) return (error); return atahpa_proc_resp(device, ccb, is48bit, NULL); } static int atahpa_freeze_lock(struct cam_device *device, int retry_count, u_int32_t timeout, union ccb *ccb, int is48bit) { int error; u_int cmd; u_int8_t protocol; protocol = AP_PROTO_NON_DATA; cmd = (is48bit) ? ATA_SET_MAX_ADDRESS48 : ATA_SET_MAX_ADDRESS; error = ata_do_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_NONE, /*protocol*/protocol, /*ata_flags*/AP_FLAG_CHK_COND, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/cmd, /*features*/ATA_HPA_FEAT_FREEZE, /*lba*/0, /*sector_count*/0, /*data_ptr*/NULL, /*dxfer_len*/0, timeout ? timeout : 1000, is48bit); if (error) return (error); return atahpa_proc_resp(device, ccb, is48bit, NULL); } static int ata_do_identify(struct cam_device *device, int retry_count, int timeout, union ccb *ccb, struct ata_params** ident_bufp) { struct ata_params *ident_buf; struct ccb_pathinq cpi; struct ccb_getdev cgd; u_int i, error; int16_t *ptr; u_int8_t command, retry_command; if (get_cpi(device, &cpi) != 0) { warnx("couldn't get CPI"); return (-1); } /* Neither PROTO_ATAPI or PROTO_SATAPM are used in cpi.protocol */ if (cpi.protocol == PROTO_ATA) { if (get_cgd(device, &cgd) != 0) { warnx("couldn't get CGD"); return (-1); } command = (cgd.protocol == PROTO_ATA) ? ATA_ATA_IDENTIFY : ATA_ATAPI_IDENTIFY; retry_command = 0; } else { /* We don't know which for sure so try both */ command = ATA_ATA_IDENTIFY; retry_command = ATA_ATAPI_IDENTIFY; } ptr = (uint16_t *)calloc(1, sizeof(struct ata_params)); if (ptr == NULL) { warnx("can't calloc memory for identify\n"); return (1); } error = ata_do_28bit_cmd(device, ccb, /*retries*/retry_count, /*flags*/CAM_DIR_IN, /*protocol*/AP_PROTO_PIO_IN, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/command, /*features*/0, /*lba*/0, /*sector_count*/(u_int8_t)sizeof(struct ata_params), /*data_ptr*/(u_int8_t *)ptr, /*dxfer_len*/sizeof(struct ata_params), /*timeout*/timeout ? timeout : 30 * 1000, /*quiet*/1); if (error != 0) { if (retry_command == 0) { free(ptr); return (1); } error = ata_do_28bit_cmd(device, ccb, /*retries*/retry_count, /*flags*/CAM_DIR_IN, /*protocol*/AP_PROTO_PIO_IN, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/retry_command, /*features*/0, /*lba*/0, /*sector_count*/(u_int8_t) sizeof(struct ata_params), /*data_ptr*/(u_int8_t *)ptr, /*dxfer_len*/sizeof(struct ata_params), /*timeout*/timeout ? timeout : 30 * 1000, /*quiet*/0); if (error != 0) { free(ptr); return (1); } } error = 1; for (i = 0; i < sizeof(struct ata_params) / 2; i++) { ptr[i] = le16toh(ptr[i]); if (ptr[i] != 0) error = 0; } if (arglist & CAM_ARG_VERBOSE) { fprintf(stdout, "%s%d: Raw identify data:\n", device->device_name, device->dev_unit_num); dump_data(ptr, sizeof(struct ata_params)); } /* check for invalid (all zero) response */ if (error != 0) { warnx("Invalid identify response detected"); free(ptr); return (error); } ident_buf = (struct ata_params *)ptr; if (strncmp(ident_buf->model, "FX", 2) && strncmp(ident_buf->model, "NEC", 3) && strncmp(ident_buf->model, "Pioneer", 7) && strncmp(ident_buf->model, "SHARP", 5)) { ata_bswap(ident_buf->model, sizeof(ident_buf->model)); ata_bswap(ident_buf->revision, sizeof(ident_buf->revision)); ata_bswap(ident_buf->serial, sizeof(ident_buf->serial)); ata_bswap(ident_buf->media_serial, sizeof(ident_buf->media_serial)); } ata_btrim(ident_buf->model, sizeof(ident_buf->model)); ata_bpack(ident_buf->model, ident_buf->model, sizeof(ident_buf->model)); ata_btrim(ident_buf->revision, sizeof(ident_buf->revision)); ata_bpack(ident_buf->revision, ident_buf->revision, sizeof(ident_buf->revision)); ata_btrim(ident_buf->serial, sizeof(ident_buf->serial)); ata_bpack(ident_buf->serial, ident_buf->serial, sizeof(ident_buf->serial)); ata_btrim(ident_buf->media_serial, sizeof(ident_buf->media_serial)); ata_bpack(ident_buf->media_serial, ident_buf->media_serial, sizeof(ident_buf->media_serial)); *ident_bufp = ident_buf; return (0); } static int ataidentify(struct cam_device *device, int retry_count, int timeout) { union ccb *ccb; struct ata_params *ident_buf; u_int64_t hpasize; if ((ccb = cam_getccb(device)) == NULL) { warnx("couldn't allocate CCB"); return (1); } if (ata_do_identify(device, retry_count, timeout, ccb, &ident_buf) != 0) { cam_freeccb(ccb); return (1); } if (ident_buf->support.command1 & ATA_SUPPORT_PROTECTED) { if (ata_read_native_max(device, retry_count, timeout, ccb, ident_buf, &hpasize) != 0) { cam_freeccb(ccb); return (1); } } else { hpasize = 0; } printf("%s%d: ", device->device_name, device->dev_unit_num); ata_print_ident(ident_buf); camxferrate(device); atacapprint(ident_buf); atahpa_print(ident_buf, hpasize, 0); free(ident_buf); cam_freeccb(ccb); return (0); } #endif /* MINIMALISTIC */ #ifndef MINIMALISTIC enum { ATA_SECURITY_ACTION_PRINT, ATA_SECURITY_ACTION_FREEZE, ATA_SECURITY_ACTION_UNLOCK, ATA_SECURITY_ACTION_DISABLE, ATA_SECURITY_ACTION_ERASE, ATA_SECURITY_ACTION_ERASE_ENHANCED, ATA_SECURITY_ACTION_SET_PASSWORD }; static void atasecurity_print_time(u_int16_t tw) { if (tw == 0) printf("unspecified"); else if (tw >= 255) printf("> 508 min"); else printf("%i min", 2 * tw); } static u_int32_t atasecurity_erase_timeout_msecs(u_int16_t timeout) { if (timeout == 0) return 2 * 3600 * 1000; /* default: two hours */ else if (timeout > 255) return (508 + 60) * 60 * 1000; /* spec says > 508 minutes */ return ((2 * timeout) + 5) * 60 * 1000; /* add a 5min margin */ } static void atasecurity_notify(u_int8_t command, struct ata_security_password *pwd) { struct ata_cmd cmd; bzero(&cmd, sizeof(cmd)); cmd.command = command; printf("Issuing %s", ata_op_string(&cmd)); if (pwd != NULL) { char pass[sizeof(pwd->password)+1]; /* pwd->password may not be null terminated */ pass[sizeof(pwd->password)] = '\0'; strncpy(pass, pwd->password, sizeof(pwd->password)); printf(" password='%s', user='%s'", pass, (pwd->ctrl & ATA_SECURITY_PASSWORD_MASTER) ? "master" : "user"); if (command == ATA_SECURITY_SET_PASSWORD) { printf(", mode='%s'", (pwd->ctrl & ATA_SECURITY_LEVEL_MAXIMUM) ? "maximum" : "high"); } } printf("\n"); } static int atasecurity_freeze(struct cam_device *device, union ccb *ccb, int retry_count, u_int32_t timeout, int quiet) { if (quiet == 0) atasecurity_notify(ATA_SECURITY_FREEZE_LOCK, NULL); return ata_do_28bit_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_NONE, /*protocol*/AP_PROTO_NON_DATA, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/ATA_SECURITY_FREEZE_LOCK, /*features*/0, /*lba*/0, /*sector_count*/0, /*data_ptr*/NULL, /*dxfer_len*/0, /*timeout*/timeout, /*quiet*/0); } static int atasecurity_unlock(struct cam_device *device, union ccb *ccb, int retry_count, u_int32_t timeout, struct ata_security_password *pwd, int quiet) { if (quiet == 0) atasecurity_notify(ATA_SECURITY_UNLOCK, pwd); return ata_do_28bit_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_OUT, /*protocol*/AP_PROTO_PIO_OUT, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/ATA_SECURITY_UNLOCK, /*features*/0, /*lba*/0, /*sector_count*/0, /*data_ptr*/(u_int8_t *)pwd, /*dxfer_len*/sizeof(*pwd), /*timeout*/timeout, /*quiet*/0); } static int atasecurity_disable(struct cam_device *device, union ccb *ccb, int retry_count, u_int32_t timeout, struct ata_security_password *pwd, int quiet) { if (quiet == 0) atasecurity_notify(ATA_SECURITY_DISABLE_PASSWORD, pwd); return ata_do_28bit_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_OUT, /*protocol*/AP_PROTO_PIO_OUT, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/ATA_SECURITY_DISABLE_PASSWORD, /*features*/0, /*lba*/0, /*sector_count*/0, /*data_ptr*/(u_int8_t *)pwd, /*dxfer_len*/sizeof(*pwd), /*timeout*/timeout, /*quiet*/0); } static int atasecurity_erase_confirm(struct cam_device *device, struct ata_params* ident_buf) { printf("\nYou are about to ERASE ALL DATA from the following" " device:\n%s%d,%s%d: ", device->device_name, device->dev_unit_num, device->given_dev_name, device->given_unit_number); ata_print_ident(ident_buf); for(;;) { char str[50]; printf("\nAre you SURE you want to ERASE ALL DATA? (yes/no) "); if (fgets(str, sizeof(str), stdin) != NULL) { if (strncasecmp(str, "yes", 3) == 0) { return (1); } else if (strncasecmp(str, "no", 2) == 0) { return (0); } else { printf("Please answer \"yes\" or " "\"no\"\n"); } } } /* NOTREACHED */ return (0); } static int atasecurity_erase(struct cam_device *device, union ccb *ccb, int retry_count, u_int32_t timeout, u_int32_t erase_timeout, struct ata_security_password *pwd, int quiet) { int error; if (quiet == 0) atasecurity_notify(ATA_SECURITY_ERASE_PREPARE, NULL); error = ata_do_28bit_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_NONE, /*protocol*/AP_PROTO_NON_DATA, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/ATA_SECURITY_ERASE_PREPARE, /*features*/0, /*lba*/0, /*sector_count*/0, /*data_ptr*/NULL, /*dxfer_len*/0, /*timeout*/timeout, /*quiet*/0); if (error != 0) return error; if (quiet == 0) atasecurity_notify(ATA_SECURITY_ERASE_UNIT, pwd); error = ata_do_28bit_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_OUT, /*protocol*/AP_PROTO_PIO_OUT, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/ATA_SECURITY_ERASE_UNIT, /*features*/0, /*lba*/0, /*sector_count*/0, /*data_ptr*/(u_int8_t *)pwd, /*dxfer_len*/sizeof(*pwd), /*timeout*/erase_timeout, /*quiet*/0); if (error == 0 && quiet == 0) printf("\nErase Complete\n"); return error; } static int atasecurity_set_password(struct cam_device *device, union ccb *ccb, int retry_count, u_int32_t timeout, struct ata_security_password *pwd, int quiet) { if (quiet == 0) atasecurity_notify(ATA_SECURITY_SET_PASSWORD, pwd); return ata_do_28bit_cmd(device, ccb, retry_count, /*flags*/CAM_DIR_OUT, /*protocol*/AP_PROTO_PIO_OUT, /*tag_action*/MSG_SIMPLE_Q_TAG, /*command*/ATA_SECURITY_SET_PASSWORD, /*features*/0, /*lba*/0, /*sector_count*/0, /*data_ptr*/(u_int8_t *)pwd, /*dxfer_len*/sizeof(*pwd), /*timeout*/timeout, /*quiet*/0); } static void atasecurity_print(struct ata_params *parm) { printf("\nSecurity Option Value\n"); if (arglist & CAM_ARG_VERBOSE) { printf("status %04x\n", parm->security_status); } printf("supported %s\n", parm->security_status & ATA_SECURITY_SUPPORTED ? "yes" : "no"); if (!(parm->security_status & ATA_SECURITY_SUPPORTED)) return; printf("enabled %s\n", parm->security_status & ATA_SECURITY_ENABLED ? "yes" : "no"); printf("drive locked %s\n", parm->security_status & ATA_SECURITY_LOCKED ? "yes" : "no"); printf("security config frozen %s\n", parm->security_status & ATA_SECURITY_FROZEN ? "yes" : "no"); printf("count expired %s\n", parm->security_status & ATA_SECURITY_COUNT_EXP ? "yes" : "no"); printf("security level %s\n", parm->security_status & ATA_SECURITY_LEVEL ? "maximum" : "high"); printf("enhanced erase supported %s\n", parm->security_status & ATA_SECURITY_ENH_SUPP ? "yes" : "no"); printf("erase time "); atasecurity_print_time(parm->erase_time); printf("\n"); printf("enhanced erase time "); atasecurity_print_time(parm->enhanced_erase_time); printf("\n"); printf("master password rev %04x%s\n", parm->master_passwd_revision, parm->master_passwd_revision == 0x0000 || parm->master_passwd_revision == 0xFFFF ? " (unsupported)" : ""); } /* * Validates and copies the password in optarg to the passed buffer. * If the password in optarg is the same length as the buffer then * the data will still be copied but no null termination will occur. */ static int ata_getpwd(u_int8_t *passwd, int max, char opt) { int len; len = strlen(optarg); if (len > max) { warnx("-%c password is too long", opt); return (1); } else if (len == 0) { warnx("-%c password is missing", opt); return (1); } else if (optarg[0] == '-'){ warnx("-%c password starts with '-' (generic arg?)", opt); return (1); } else if (strlen(passwd) != 0 && strcmp(passwd, optarg) != 0) { warnx("-%c password conflicts with existing password from -%c", opt, pwd_opt); return (1); } /* Callers pass in a buffer which does NOT need to be terminated */ strncpy(passwd, optarg, max); pwd_opt = opt; return (0); } enum { ATA_HPA_ACTION_PRINT, ATA_HPA_ACTION_SET_MAX, ATA_HPA_ACTION_SET_PWD, ATA_HPA_ACTION_LOCK, ATA_HPA_ACTION_UNLOCK, ATA_HPA_ACTION_FREEZE_LOCK }; static int atahpa_set_confirm(struct cam_device *device, struct ata_params* ident_buf, u_int64_t maxsize, int persist) { printf("\nYou are about to configure HPA to limit the user accessible\n" "sectors to %ju %s on the device:\n%s%d,%s%d: ", maxsize, persist ? "persistently" : "temporarily", device->device_name, device->dev_unit_num, device->given_dev_name, device->given_unit_number); ata_print_ident(ident_buf); for(;;) { char str[50]; printf("\nAre you SURE you want to configure HPA? (yes/no) "); if (NULL != fgets(str, sizeof(str), stdin)) { if (0 == strncasecmp(str, "yes", 3)) { return (1); } else if (0 == strncasecmp(str, "no", 2)) { return (0); } else { printf("Please answer \"yes\" or " "\"no\"\n"); } } } /* NOTREACHED */ return (0); } static int atahpa(struct cam_device *device, int retry_count, int timeout, int argc, char **argv, char *combinedopt) { union ccb *ccb; struct ata_params *ident_buf; struct ccb_getdev cgd; struct ata_set_max_pwd pwd; int error, confirm, quiet, c, action, actions, setpwd, persist; int security, is48bit, pwdsize; u_int64_t hpasize, maxsize; actions = 0; setpwd = 0; confirm = 0; quiet = 0; maxsize = 0; persist = 0; security = 0; memset(&pwd, 0, sizeof(pwd)); /* default action is to print hpa information */ action = ATA_HPA_ACTION_PRINT; pwdsize = sizeof(pwd.password); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c){ case 's': action = ATA_HPA_ACTION_SET_MAX; maxsize = strtoumax(optarg, NULL, 0); actions++; break; case 'p': if (ata_getpwd(pwd.password, pwdsize, c) != 0) return (1); action = ATA_HPA_ACTION_SET_PWD; security = 1; actions++; break; case 'l': action = ATA_HPA_ACTION_LOCK; security = 1; actions++; break; case 'U': if (ata_getpwd(pwd.password, pwdsize, c) != 0) return (1); action = ATA_HPA_ACTION_UNLOCK; security = 1; actions++; break; case 'f': action = ATA_HPA_ACTION_FREEZE_LOCK; security = 1; actions++; break; case 'P': persist = 1; break; case 'y': confirm++; break; case 'q': quiet++; break; } } if (actions > 1) { warnx("too many hpa actions specified"); return (1); } if (get_cgd(device, &cgd) != 0) { warnx("couldn't get CGD"); return (1); } ccb = cam_getccb(device); if (ccb == NULL) { warnx("couldn't allocate CCB"); return (1); } error = ata_do_identify(device, retry_count, timeout, ccb, &ident_buf); if (error != 0) { cam_freeccb(ccb); return (1); } if (quiet == 0) { printf("%s%d: ", device->device_name, device->dev_unit_num); ata_print_ident(ident_buf); camxferrate(device); } if (action == ATA_HPA_ACTION_PRINT) { error = ata_read_native_max(device, retry_count, timeout, ccb, ident_buf, &hpasize); if (error == 0) atahpa_print(ident_buf, hpasize, 1); cam_freeccb(ccb); free(ident_buf); return (error); } if (!(ident_buf->support.command1 & ATA_SUPPORT_PROTECTED)) { warnx("HPA is not supported by this device"); cam_freeccb(ccb); free(ident_buf); return (1); } if (security && !(ident_buf->support.command1 & ATA_SUPPORT_MAXSECURITY)) { warnx("HPA Security is not supported by this device"); cam_freeccb(ccb); free(ident_buf); return (1); } is48bit = ident_buf->support.command2 & ATA_SUPPORT_ADDRESS48; /* * The ATA spec requires: * 1. Read native max addr is called directly before set max addr * 2. Read native max addr is NOT called before any other set max call */ switch(action) { case ATA_HPA_ACTION_SET_MAX: if (confirm == 0 && atahpa_set_confirm(device, ident_buf, maxsize, persist) == 0) { cam_freeccb(ccb); free(ident_buf); return (1); } error = ata_read_native_max(device, retry_count, timeout, ccb, ident_buf, &hpasize); if (error == 0) { error = atahpa_set_max(device, retry_count, timeout, ccb, is48bit, maxsize, persist); if (error == 0) { /* redo identify to get new lba values */ error = ata_do_identify(device, retry_count, timeout, ccb, &ident_buf); atahpa_print(ident_buf, hpasize, 1); } } break; case ATA_HPA_ACTION_SET_PWD: error = atahpa_password(device, retry_count, timeout, ccb, is48bit, &pwd); if (error == 0) printf("HPA password has been set\n"); break; case ATA_HPA_ACTION_LOCK: error = atahpa_lock(device, retry_count, timeout, ccb, is48bit); if (error == 0) printf("HPA has been locked\n"); break; case ATA_HPA_ACTION_UNLOCK: error = atahpa_unlock(device, retry_count, timeout, ccb, is48bit, &pwd); if (error == 0) printf("HPA has been unlocked\n"); break; case ATA_HPA_ACTION_FREEZE_LOCK: error = atahpa_freeze_lock(device, retry_count, timeout, ccb, is48bit); if (error == 0) printf("HPA has been frozen\n"); break; default: errx(1, "Option currently not supported"); } cam_freeccb(ccb); free(ident_buf); return (error); } static int atasecurity(struct cam_device *device, int retry_count, int timeout, int argc, char **argv, char *combinedopt) { union ccb *ccb; struct ata_params *ident_buf; int error, confirm, quiet, c, action, actions, setpwd; int security_enabled, erase_timeout, pwdsize; struct ata_security_password pwd; actions = 0; setpwd = 0; erase_timeout = 0; confirm = 0; quiet = 0; memset(&pwd, 0, sizeof(pwd)); /* default action is to print security information */ action = ATA_SECURITY_ACTION_PRINT; /* user is master by default as its safer that way */ pwd.ctrl |= ATA_SECURITY_PASSWORD_MASTER; pwdsize = sizeof(pwd.password); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c){ case 'f': action = ATA_SECURITY_ACTION_FREEZE; actions++; break; case 'U': if (strcasecmp(optarg, "user") == 0) { pwd.ctrl |= ATA_SECURITY_PASSWORD_USER; pwd.ctrl &= ~ATA_SECURITY_PASSWORD_MASTER; } else if (strcasecmp(optarg, "master") == 0) { pwd.ctrl |= ATA_SECURITY_PASSWORD_MASTER; pwd.ctrl &= ~ATA_SECURITY_PASSWORD_USER; } else { warnx("-U argument '%s' is invalid (must be " "'user' or 'master')", optarg); return (1); } break; case 'l': if (strcasecmp(optarg, "high") == 0) { pwd.ctrl |= ATA_SECURITY_LEVEL_HIGH; pwd.ctrl &= ~ATA_SECURITY_LEVEL_MAXIMUM; } else if (strcasecmp(optarg, "maximum") == 0) { pwd.ctrl |= ATA_SECURITY_LEVEL_MAXIMUM; pwd.ctrl &= ~ATA_SECURITY_LEVEL_HIGH; } else { warnx("-l argument '%s' is unknown (must be " "'high' or 'maximum')", optarg); return (1); } break; case 'k': if (ata_getpwd(pwd.password, pwdsize, c) != 0) return (1); action = ATA_SECURITY_ACTION_UNLOCK; actions++; break; case 'd': if (ata_getpwd(pwd.password, pwdsize, c) != 0) return (1); action = ATA_SECURITY_ACTION_DISABLE; actions++; break; case 'e': if (ata_getpwd(pwd.password, pwdsize, c) != 0) return (1); action = ATA_SECURITY_ACTION_ERASE; actions++; break; case 'h': if (ata_getpwd(pwd.password, pwdsize, c) != 0) return (1); pwd.ctrl |= ATA_SECURITY_ERASE_ENHANCED; action = ATA_SECURITY_ACTION_ERASE_ENHANCED; actions++; break; case 's': if (ata_getpwd(pwd.password, pwdsize, c) != 0) return (1); setpwd = 1; if (action == ATA_SECURITY_ACTION_PRINT) action = ATA_SECURITY_ACTION_SET_PASSWORD; /* * Don't increment action as this can be combined * with other actions. */ break; case 'y': confirm++; break; case 'q': quiet++; break; case 'T': erase_timeout = atoi(optarg) * 1000; break; } } if (actions > 1) { warnx("too many security actions specified"); return (1); } if ((ccb = cam_getccb(device)) == NULL) { warnx("couldn't allocate CCB"); return (1); } error = ata_do_identify(device, retry_count, timeout, ccb, &ident_buf); if (error != 0) { cam_freeccb(ccb); return (1); } if (quiet == 0) { printf("%s%d: ", device->device_name, device->dev_unit_num); ata_print_ident(ident_buf); camxferrate(device); } if (action == ATA_SECURITY_ACTION_PRINT) { atasecurity_print(ident_buf); free(ident_buf); cam_freeccb(ccb); return (0); } if ((ident_buf->support.command1 & ATA_SUPPORT_SECURITY) == 0) { warnx("Security not supported"); free(ident_buf); cam_freeccb(ccb); return (1); } /* default timeout 15 seconds the same as linux hdparm */ timeout = timeout ? timeout : 15 * 1000; security_enabled = ident_buf->security_status & ATA_SECURITY_ENABLED; /* first set the password if requested */ if (setpwd == 1) { /* confirm we can erase before setting the password if erasing */ if (confirm == 0 && (action == ATA_SECURITY_ACTION_ERASE_ENHANCED || action == ATA_SECURITY_ACTION_ERASE) && atasecurity_erase_confirm(device, ident_buf) == 0) { cam_freeccb(ccb); free(ident_buf); return (error); } if (pwd.ctrl & ATA_SECURITY_PASSWORD_MASTER) { pwd.revision = ident_buf->master_passwd_revision; if (pwd.revision != 0 && pwd.revision != 0xfff && --pwd.revision == 0) { pwd.revision = 0xfffe; } } error = atasecurity_set_password(device, ccb, retry_count, timeout, &pwd, quiet); if (error != 0) { cam_freeccb(ccb); free(ident_buf); return (error); } security_enabled = 1; } switch(action) { case ATA_SECURITY_ACTION_FREEZE: error = atasecurity_freeze(device, ccb, retry_count, timeout, quiet); break; case ATA_SECURITY_ACTION_UNLOCK: if (security_enabled) { if (ident_buf->security_status & ATA_SECURITY_LOCKED) { error = atasecurity_unlock(device, ccb, retry_count, timeout, &pwd, quiet); } else { warnx("Can't unlock, drive is not locked"); error = 1; } } else { warnx("Can't unlock, security is disabled"); error = 1; } break; case ATA_SECURITY_ACTION_DISABLE: if (security_enabled) { /* First unlock the drive if its locked */ if (ident_buf->security_status & ATA_SECURITY_LOCKED) { error = atasecurity_unlock(device, ccb, retry_count, timeout, &pwd, quiet); } if (error == 0) { error = atasecurity_disable(device, ccb, retry_count, timeout, &pwd, quiet); } } else { warnx("Can't disable security (already disabled)"); error = 1; } break; case ATA_SECURITY_ACTION_ERASE: if (security_enabled) { if (erase_timeout == 0) { erase_timeout = atasecurity_erase_timeout_msecs( ident_buf->erase_time); } error = atasecurity_erase(device, ccb, retry_count, timeout, erase_timeout, &pwd, quiet); } else { warnx("Can't secure erase (security is disabled)"); error = 1; } break; case ATA_SECURITY_ACTION_ERASE_ENHANCED: if (security_enabled) { if (ident_buf->security_status & ATA_SECURITY_ENH_SUPP) { if (erase_timeout == 0) { erase_timeout = atasecurity_erase_timeout_msecs( ident_buf->enhanced_erase_time); } error = atasecurity_erase(device, ccb, retry_count, timeout, erase_timeout, &pwd, quiet); } else { warnx("Enhanced erase is not supported"); error = 1; } } else { warnx("Can't secure erase (enhanced), " "(security is disabled)"); error = 1; } break; } cam_freeccb(ccb); free(ident_buf); return (error); } #endif /* MINIMALISTIC */ /* * Parse out a bus, or a bus, target and lun in the following * format: * bus * bus:target * bus:target:lun * * Returns the number of parsed components, or 0. */ static int parse_btl(char *tstr, path_id_t *bus, target_id_t *target, lun_id_t *lun, cam_argmask *arglst) { char *tmpstr; int convs = 0; while (isspace(*tstr) && (*tstr != '\0')) tstr++; tmpstr = (char *)strtok(tstr, ":"); if ((tmpstr != NULL) && (*tmpstr != '\0')) { *bus = strtol(tmpstr, NULL, 0); *arglst |= CAM_ARG_BUS; convs++; tmpstr = (char *)strtok(NULL, ":"); if ((tmpstr != NULL) && (*tmpstr != '\0')) { *target = strtol(tmpstr, NULL, 0); *arglst |= CAM_ARG_TARGET; convs++; tmpstr = (char *)strtok(NULL, ":"); if ((tmpstr != NULL) && (*tmpstr != '\0')) { *lun = strtol(tmpstr, NULL, 0); *arglst |= CAM_ARG_LUN; convs++; } } } return convs; } static int dorescan_or_reset(int argc, char **argv, int rescan) { static const char must[] = "you must specify \"all\", a bus, or a bus:target:lun to %s"; int rv, error = 0; path_id_t bus = CAM_BUS_WILDCARD; target_id_t target = CAM_TARGET_WILDCARD; lun_id_t lun = CAM_LUN_WILDCARD; char *tstr; if (argc < 3) { warnx(must, rescan? "rescan" : "reset"); return(1); } tstr = argv[optind]; while (isspace(*tstr) && (*tstr != '\0')) tstr++; if (strncasecmp(tstr, "all", strlen("all")) == 0) arglist |= CAM_ARG_BUS; else { rv = parse_btl(argv[optind], &bus, &target, &lun, &arglist); if (rv != 1 && rv != 3) { warnx(must, rescan? "rescan" : "reset"); return(1); } } if ((arglist & CAM_ARG_BUS) && (arglist & CAM_ARG_TARGET) && (arglist & CAM_ARG_LUN)) error = scanlun_or_reset_dev(bus, target, lun, rescan); else error = rescan_or_reset_bus(bus, rescan); return(error); } static int rescan_or_reset_bus(path_id_t bus, int rescan) { union ccb ccb, matchccb; int fd, retval; int bufsize; retval = 0; if ((fd = open(XPT_DEVICE, O_RDWR)) < 0) { warnx("error opening transport layer device %s", XPT_DEVICE); warn("%s", XPT_DEVICE); return(1); } if (bus != CAM_BUS_WILDCARD) { ccb.ccb_h.func_code = rescan ? XPT_SCAN_BUS : XPT_RESET_BUS; ccb.ccb_h.path_id = bus; ccb.ccb_h.target_id = CAM_TARGET_WILDCARD; ccb.ccb_h.target_lun = CAM_LUN_WILDCARD; ccb.crcn.flags = CAM_FLAG_NONE; /* run this at a low priority */ ccb.ccb_h.pinfo.priority = 5; if (ioctl(fd, CAMIOCOMMAND, &ccb) == -1) { warn("CAMIOCOMMAND ioctl failed"); close(fd); return(1); } if ((ccb.ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) { fprintf(stdout, "%s of bus %d was successful\n", rescan ? "Re-scan" : "Reset", bus); } else { fprintf(stdout, "%s of bus %d returned error %#x\n", rescan ? "Re-scan" : "Reset", bus, ccb.ccb_h.status & CAM_STATUS_MASK); retval = 1; } close(fd); return(retval); } /* * The right way to handle this is to modify the xpt so that it can * handle a wildcarded bus in a rescan or reset CCB. At the moment * that isn't implemented, so instead we enumerate the busses and * send the rescan or reset to those busses in the case where the * given bus is -1 (wildcard). We don't send a rescan or reset * to the xpt bus; sending a rescan to the xpt bus is effectively a * no-op, sending a rescan to the xpt bus would result in a status of * CAM_REQ_INVALID. */ bzero(&(&matchccb.ccb_h)[1], sizeof(struct ccb_dev_match) - sizeof(struct ccb_hdr)); matchccb.ccb_h.func_code = XPT_DEV_MATCH; matchccb.ccb_h.path_id = CAM_BUS_WILDCARD; bufsize = sizeof(struct dev_match_result) * 20; matchccb.cdm.match_buf_len = bufsize; matchccb.cdm.matches=(struct dev_match_result *)malloc(bufsize); if (matchccb.cdm.matches == NULL) { warnx("can't malloc memory for matches"); retval = 1; goto bailout; } matchccb.cdm.num_matches = 0; matchccb.cdm.num_patterns = 1; matchccb.cdm.pattern_buf_len = sizeof(struct dev_match_pattern); matchccb.cdm.patterns = (struct dev_match_pattern *)malloc( matchccb.cdm.pattern_buf_len); if (matchccb.cdm.patterns == NULL) { warnx("can't malloc memory for patterns"); retval = 1; goto bailout; } matchccb.cdm.patterns[0].type = DEV_MATCH_BUS; matchccb.cdm.patterns[0].pattern.bus_pattern.flags = BUS_MATCH_ANY; do { unsigned int i; if (ioctl(fd, CAMIOCOMMAND, &matchccb) == -1) { warn("CAMIOCOMMAND ioctl failed"); retval = 1; goto bailout; } if ((matchccb.ccb_h.status != CAM_REQ_CMP) || ((matchccb.cdm.status != CAM_DEV_MATCH_LAST) && (matchccb.cdm.status != CAM_DEV_MATCH_MORE))) { warnx("got CAM error %#x, CDM error %d\n", matchccb.ccb_h.status, matchccb.cdm.status); retval = 1; goto bailout; } for (i = 0; i < matchccb.cdm.num_matches; i++) { struct bus_match_result *bus_result; /* This shouldn't happen. */ if (matchccb.cdm.matches[i].type != DEV_MATCH_BUS) continue; bus_result = &matchccb.cdm.matches[i].result.bus_result; /* * We don't want to rescan or reset the xpt bus. * See above. */ if (bus_result->path_id == CAM_XPT_PATH_ID) continue; ccb.ccb_h.func_code = rescan ? XPT_SCAN_BUS : XPT_RESET_BUS; ccb.ccb_h.path_id = bus_result->path_id; ccb.ccb_h.target_id = CAM_TARGET_WILDCARD; ccb.ccb_h.target_lun = CAM_LUN_WILDCARD; ccb.crcn.flags = CAM_FLAG_NONE; /* run this at a low priority */ ccb.ccb_h.pinfo.priority = 5; if (ioctl(fd, CAMIOCOMMAND, &ccb) == -1) { warn("CAMIOCOMMAND ioctl failed"); retval = 1; goto bailout; } if ((ccb.ccb_h.status & CAM_STATUS_MASK) ==CAM_REQ_CMP){ fprintf(stdout, "%s of bus %d was successful\n", rescan? "Re-scan" : "Reset", bus_result->path_id); } else { /* * Don't bail out just yet, maybe the other * rescan or reset commands will complete * successfully. */ fprintf(stderr, "%s of bus %d returned error " "%#x\n", rescan? "Re-scan" : "Reset", bus_result->path_id, ccb.ccb_h.status & CAM_STATUS_MASK); retval = 1; } } } while ((matchccb.ccb_h.status == CAM_REQ_CMP) && (matchccb.cdm.status == CAM_DEV_MATCH_MORE)); bailout: if (fd != -1) close(fd); if (matchccb.cdm.patterns != NULL) free(matchccb.cdm.patterns); if (matchccb.cdm.matches != NULL) free(matchccb.cdm.matches); return(retval); } static int scanlun_or_reset_dev(path_id_t bus, target_id_t target, lun_id_t lun, int scan) { union ccb ccb; struct cam_device *device; int fd; device = NULL; if (bus == CAM_BUS_WILDCARD) { warnx("invalid bus number %d", bus); return(1); } if (target == CAM_TARGET_WILDCARD) { warnx("invalid target number %d", target); return(1); } if (lun == CAM_LUN_WILDCARD) { warnx("invalid lun number %jx", (uintmax_t)lun); return(1); } fd = -1; bzero(&ccb, sizeof(union ccb)); if (scan) { if ((fd = open(XPT_DEVICE, O_RDWR)) < 0) { warnx("error opening transport layer device %s\n", XPT_DEVICE); warn("%s", XPT_DEVICE); return(1); } } else { device = cam_open_btl(bus, target, lun, O_RDWR, NULL); if (device == NULL) { warnx("%s", cam_errbuf); return(1); } } ccb.ccb_h.func_code = (scan)? XPT_SCAN_LUN : XPT_RESET_DEV; ccb.ccb_h.path_id = bus; ccb.ccb_h.target_id = target; ccb.ccb_h.target_lun = lun; ccb.ccb_h.timeout = 5000; ccb.crcn.flags = CAM_FLAG_NONE; /* run this at a low priority */ ccb.ccb_h.pinfo.priority = 5; if (scan) { if (ioctl(fd, CAMIOCOMMAND, &ccb) < 0) { warn("CAMIOCOMMAND ioctl failed"); close(fd); return(1); } } else { if (cam_send_ccb(device, &ccb) < 0) { warn("error sending XPT_RESET_DEV CCB"); cam_close_device(device); return(1); } } if (scan) close(fd); else cam_close_device(device); /* * An error code of CAM_BDR_SENT is normal for a BDR request. */ if (((ccb.ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) || ((!scan) && ((ccb.ccb_h.status & CAM_STATUS_MASK) == CAM_BDR_SENT))) { fprintf(stdout, "%s of %d:%d:%jx was successful\n", scan? "Re-scan" : "Reset", bus, target, (uintmax_t)lun); return(0); } else { fprintf(stdout, "%s of %d:%d:%jx returned error %#x\n", scan? "Re-scan" : "Reset", bus, target, (uintmax_t)lun, ccb.ccb_h.status & CAM_STATUS_MASK); return(1); } } #ifndef MINIMALISTIC static struct scsi_nv defect_list_type_map[] = { { "block", SRDD10_BLOCK_FORMAT }, { "extbfi", SRDD10_EXT_BFI_FORMAT }, { "extphys", SRDD10_EXT_PHYS_FORMAT }, { "longblock", SRDD10_LONG_BLOCK_FORMAT }, { "bfi", SRDD10_BYTES_FROM_INDEX_FORMAT }, { "phys", SRDD10_PHYSICAL_SECTOR_FORMAT } }; static int readdefects(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { union ccb *ccb = NULL; struct scsi_read_defect_data_hdr_10 *hdr10 = NULL; struct scsi_read_defect_data_hdr_12 *hdr12 = NULL; size_t hdr_size = 0, entry_size = 0; int use_12byte = 0; int hex_format = 0; u_int8_t *defect_list = NULL; u_int8_t list_format = 0; int list_type_set = 0; u_int32_t dlist_length = 0; u_int32_t returned_length = 0, valid_len = 0; u_int32_t num_returned = 0, num_valid = 0; u_int32_t max_possible_size = 0, hdr_max = 0; u_int32_t starting_offset = 0; u_int8_t returned_format, returned_type; unsigned int i; int summary = 0, quiet = 0; int c, error = 0; int lists_specified = 0; int get_length = 1, first_pass = 1; int mads = 0; while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c){ case 'f': { scsi_nv_status status; int entry_num = 0; status = scsi_get_nv(defect_list_type_map, sizeof(defect_list_type_map) / sizeof(defect_list_type_map[0]), optarg, &entry_num, SCSI_NV_FLAG_IG_CASE); if (status == SCSI_NV_FOUND) { list_format = defect_list_type_map[ entry_num].value; list_type_set = 1; } else { warnx("%s: %s %s option %s", __func__, (status == SCSI_NV_AMBIGUOUS) ? "ambiguous" : "invalid", "defect list type", optarg); error = 1; goto defect_bailout; } break; } case 'G': arglist |= CAM_ARG_GLIST; break; case 'P': arglist |= CAM_ARG_PLIST; break; case 'q': quiet = 1; break; case 's': summary = 1; break; case 'S': { char *endptr; starting_offset = strtoul(optarg, &endptr, 0); if (*endptr != '\0') { error = 1; warnx("invalid starting offset %s", optarg); goto defect_bailout; } break; } case 'X': hex_format = 1; break; default: break; } } if (list_type_set == 0) { error = 1; warnx("no defect list format specified"); goto defect_bailout; } if (arglist & CAM_ARG_PLIST) { list_format |= SRDD10_PLIST; lists_specified++; } if (arglist & CAM_ARG_GLIST) { list_format |= SRDD10_GLIST; lists_specified++; } /* * This implies a summary, and was the previous behavior. */ if (lists_specified == 0) summary = 1; ccb = cam_getccb(device); retry_12byte: /* * We start off asking for just the header to determine how much * defect data is available. Some Hitachi drives return an error * if you ask for more data than the drive has. Once we know the * length, we retry the command with the returned length. */ if (use_12byte == 0) dlist_length = sizeof(*hdr10); else dlist_length = sizeof(*hdr12); retry: if (defect_list != NULL) { free(defect_list); defect_list = NULL; } defect_list = malloc(dlist_length); if (defect_list == NULL) { warnx("can't malloc memory for defect list"); error = 1; goto defect_bailout; } next_batch: bzero(defect_list, dlist_length); /* * cam_getccb() zeros the CCB header only. So we need to zero the * payload portion of the ccb. */ bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); scsi_read_defects(&ccb->csio, /*retries*/ retry_count, /*cbfcnp*/ NULL, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*list_format*/ list_format, /*addr_desc_index*/ starting_offset, /*data_ptr*/ defect_list, /*dxfer_len*/ dlist_length, /*minimum_cmd_size*/ use_12byte ? 12 : 0, /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ timeout ? timeout : 5000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (cam_send_ccb(device, ccb) < 0) { perror("error reading defect list"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } error = 1; goto defect_bailout; } valid_len = ccb->csio.dxfer_len - ccb->csio.resid; if (use_12byte == 0) { hdr10 = (struct scsi_read_defect_data_hdr_10 *)defect_list; hdr_size = sizeof(*hdr10); hdr_max = SRDDH10_MAX_LENGTH; if (valid_len >= hdr_size) { returned_length = scsi_2btoul(hdr10->length); returned_format = hdr10->format; } else { returned_length = 0; returned_format = 0; } } else { hdr12 = (struct scsi_read_defect_data_hdr_12 *)defect_list; hdr_size = sizeof(*hdr12); hdr_max = SRDDH12_MAX_LENGTH; if (valid_len >= hdr_size) { returned_length = scsi_4btoul(hdr12->length); returned_format = hdr12->format; } else { returned_length = 0; returned_format = 0; } } returned_type = returned_format & SRDDH10_DLIST_FORMAT_MASK; switch (returned_type) { case SRDD10_BLOCK_FORMAT: entry_size = sizeof(struct scsi_defect_desc_block); break; case SRDD10_LONG_BLOCK_FORMAT: entry_size = sizeof(struct scsi_defect_desc_long_block); break; case SRDD10_EXT_PHYS_FORMAT: case SRDD10_PHYSICAL_SECTOR_FORMAT: entry_size = sizeof(struct scsi_defect_desc_phys_sector); break; case SRDD10_EXT_BFI_FORMAT: case SRDD10_BYTES_FROM_INDEX_FORMAT: entry_size = sizeof(struct scsi_defect_desc_bytes_from_index); break; default: warnx("Unknown defect format 0x%x\n", returned_type); error = 1; goto defect_bailout; break; } max_possible_size = (hdr_max / entry_size) * entry_size; num_returned = returned_length / entry_size; num_valid = min(returned_length, valid_len - hdr_size); num_valid /= entry_size; if (get_length != 0) { get_length = 0; if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR) { struct scsi_sense_data *sense; int error_code, sense_key, asc, ascq; sense = &ccb->csio.sense_data; scsi_extract_sense_len(sense, ccb->csio.sense_len - ccb->csio.sense_resid, &error_code, &sense_key, &asc, &ascq, /*show_errors*/ 1); /* * If the drive is reporting that it just doesn't * support the defect list format, go ahead and use * the length it reported. Otherwise, the length * may not be valid, so use the maximum. */ if ((sense_key == SSD_KEY_RECOVERED_ERROR) && (asc == 0x1c) && (ascq == 0x00) && (returned_length > 0)) { if ((use_12byte == 0) && (returned_length >= max_possible_size)) { get_length = 1; use_12byte = 1; goto retry_12byte; } dlist_length = returned_length + hdr_size; } else if ((sense_key == SSD_KEY_RECOVERED_ERROR) && (asc == 0x1f) && (ascq == 0x00) && (returned_length > 0)) { /* Partial defect list transfer */ /* * Hitachi drives return this error * along with a partial defect list if they * have more defects than the 10 byte * command can support. Retry with the 12 * byte command. */ if (use_12byte == 0) { get_length = 1; use_12byte = 1; goto retry_12byte; } dlist_length = returned_length + hdr_size; } else if ((sense_key == SSD_KEY_ILLEGAL_REQUEST) && (asc == 0x24) && (ascq == 0x00)) { /* Invalid field in CDB */ /* * SBC-3 says that if the drive has more * defects than can be reported with the * 10 byte command, it should return this * error and no data. Retry with the 12 * byte command. */ if (use_12byte == 0) { get_length = 1; use_12byte = 1; goto retry_12byte; } dlist_length = returned_length + hdr_size; } else { /* * If we got a SCSI error and no valid length, * just use the 10 byte maximum. The 12 * byte maximum is too large. */ if (returned_length == 0) dlist_length = SRDD10_MAX_LENGTH; else { if ((use_12byte == 0) && (returned_length >= max_possible_size)) { get_length = 1; use_12byte = 1; goto retry_12byte; } dlist_length = returned_length + hdr_size; } } } else if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP){ error = 1; warnx("Error reading defect header"); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); goto defect_bailout; } else { if ((use_12byte == 0) && (returned_length >= max_possible_size)) { get_length = 1; use_12byte = 1; goto retry_12byte; } dlist_length = returned_length + hdr_size; } if (summary != 0) { fprintf(stdout, "%u", num_returned); if (quiet == 0) { fprintf(stdout, " defect%s", (num_returned != 1) ? "s" : ""); } fprintf(stdout, "\n"); goto defect_bailout; } /* * We always limit the list length to the 10-byte maximum * length (0xffff). The reason is that some controllers * can't handle larger I/Os, and we can transfer the entire * 10 byte list in one shot. For drives that support the 12 * byte read defects command, we'll step through the list * by specifying a starting offset. For drives that don't * support the 12 byte command's starting offset, we'll * just display the first 64K. */ dlist_length = min(dlist_length, SRDD10_MAX_LENGTH); goto retry; } if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR) && (ccb->csio.scsi_status == SCSI_STATUS_CHECK_COND) && ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) != 0)) { struct scsi_sense_data *sense; int error_code, sense_key, asc, ascq; sense = &ccb->csio.sense_data; scsi_extract_sense_len(sense, ccb->csio.sense_len - ccb->csio.sense_resid, &error_code, &sense_key, &asc, &ascq, /*show_errors*/ 1); /* * According to the SCSI spec, if the disk doesn't support * the requested format, it will generally return a sense * key of RECOVERED ERROR, and an additional sense code * of "DEFECT LIST NOT FOUND". HGST drives also return * Primary/Grown defect list not found errors. So just * check for an ASC of 0x1c. */ if ((sense_key == SSD_KEY_RECOVERED_ERROR) && (asc == 0x1c)) { const char *format_str; format_str = scsi_nv_to_str(defect_list_type_map, sizeof(defect_list_type_map) / sizeof(defect_list_type_map[0]), list_format & SRDD10_DLIST_FORMAT_MASK); warnx("requested defect format %s not available", format_str ? format_str : "unknown"); format_str = scsi_nv_to_str(defect_list_type_map, sizeof(defect_list_type_map) / sizeof(defect_list_type_map[0]), returned_type); if (format_str != NULL) { warnx("Device returned %s format", format_str); } else { error = 1; warnx("Device returned unknown defect" " data format %#x", returned_type); goto defect_bailout; } } else { error = 1; warnx("Error returned from read defect data command"); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); goto defect_bailout; } } else if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { error = 1; warnx("Error returned from read defect data command"); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); goto defect_bailout; } if (first_pass != 0) { fprintf(stderr, "Got %d defect", num_returned); if ((lists_specified == 0) || (num_returned == 0)) { fprintf(stderr, "s.\n"); goto defect_bailout; } else if (num_returned == 1) fprintf(stderr, ":\n"); else fprintf(stderr, "s:\n"); first_pass = 0; } /* * XXX KDM I should probably clean up the printout format for the * disk defects. */ switch (returned_type) { case SRDD10_PHYSICAL_SECTOR_FORMAT: case SRDD10_EXT_PHYS_FORMAT: { struct scsi_defect_desc_phys_sector *dlist; dlist = (struct scsi_defect_desc_phys_sector *) (defect_list + hdr_size); for (i = 0; i < num_valid; i++) { uint32_t sector; sector = scsi_4btoul(dlist[i].sector); if (returned_type == SRDD10_EXT_PHYS_FORMAT) { mads = (sector & SDD_EXT_PHYS_MADS) ? 0 : 1; sector &= ~SDD_EXT_PHYS_FLAG_MASK; } if (hex_format == 0) fprintf(stdout, "%d:%d:%d%s", scsi_3btoul(dlist[i].cylinder), dlist[i].head, scsi_4btoul(dlist[i].sector), mads ? " - " : "\n"); else fprintf(stdout, "0x%x:0x%x:0x%x%s", scsi_3btoul(dlist[i].cylinder), dlist[i].head, scsi_4btoul(dlist[i].sector), mads ? " - " : "\n"); mads = 0; } if (num_valid < num_returned) { starting_offset += num_valid; goto next_batch; } break; } case SRDD10_BYTES_FROM_INDEX_FORMAT: case SRDD10_EXT_BFI_FORMAT: { struct scsi_defect_desc_bytes_from_index *dlist; dlist = (struct scsi_defect_desc_bytes_from_index *) (defect_list + hdr_size); for (i = 0; i < num_valid; i++) { uint32_t bfi; bfi = scsi_4btoul(dlist[i].bytes_from_index); if (returned_type == SRDD10_EXT_BFI_FORMAT) { mads = (bfi & SDD_EXT_BFI_MADS) ? 1 : 0; bfi &= ~SDD_EXT_BFI_FLAG_MASK; } if (hex_format == 0) fprintf(stdout, "%d:%d:%d%s", scsi_3btoul(dlist[i].cylinder), dlist[i].head, scsi_4btoul(dlist[i].bytes_from_index), mads ? " - " : "\n"); else fprintf(stdout, "0x%x:0x%x:0x%x%s", scsi_3btoul(dlist[i].cylinder), dlist[i].head, scsi_4btoul(dlist[i].bytes_from_index), mads ? " - " : "\n"); mads = 0; } if (num_valid < num_returned) { starting_offset += num_valid; goto next_batch; } break; } case SRDDH10_BLOCK_FORMAT: { struct scsi_defect_desc_block *dlist; dlist = (struct scsi_defect_desc_block *) (defect_list + hdr_size); for (i = 0; i < num_valid; i++) { if (hex_format == 0) fprintf(stdout, "%u\n", scsi_4btoul(dlist[i].address)); else fprintf(stdout, "0x%x\n", scsi_4btoul(dlist[i].address)); } if (num_valid < num_returned) { starting_offset += num_valid; goto next_batch; } break; } case SRDD10_LONG_BLOCK_FORMAT: { struct scsi_defect_desc_long_block *dlist; dlist = (struct scsi_defect_desc_long_block *) (defect_list + hdr_size); for (i = 0; i < num_valid; i++) { if (hex_format == 0) fprintf(stdout, "%ju\n", (uintmax_t)scsi_8btou64( dlist[i].address)); else fprintf(stdout, "0x%jx\n", (uintmax_t)scsi_8btou64( dlist[i].address)); } if (num_valid < num_returned) { starting_offset += num_valid; goto next_batch; } break; } default: fprintf(stderr, "Unknown defect format 0x%x\n", returned_type); error = 1; break; } defect_bailout: if (defect_list != NULL) free(defect_list); if (ccb != NULL) cam_freeccb(ccb); return(error); } #endif /* MINIMALISTIC */ #if 0 void reassignblocks(struct cam_device *device, u_int32_t *blocks, int num_blocks) { union ccb *ccb; ccb = cam_getccb(device); cam_freeccb(ccb); } #endif #ifndef MINIMALISTIC void mode_sense(struct cam_device *device, int mode_page, int page_control, int dbd, int retry_count, int timeout, u_int8_t *data, int datalen) { union ccb *ccb; int retval; ccb = cam_getccb(device); if (ccb == NULL) errx(1, "mode_sense: couldn't allocate CCB"); bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); scsi_mode_sense(&ccb->csio, /* retries */ retry_count, /* cbfcnp */ NULL, /* tag_action */ MSG_SIMPLE_Q_TAG, /* dbd */ dbd, /* page_code */ page_control << 6, /* page */ mode_page, /* param_buf */ data, /* param_len */ datalen, /* sense_len */ SSD_FULL_SIZE, /* timeout */ timeout ? timeout : 5000); if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (((retval = cam_send_ccb(device, ccb)) < 0) || ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) { if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } cam_freeccb(ccb); cam_close_device(device); if (retval < 0) err(1, "error sending mode sense command"); else errx(1, "error sending mode sense command"); } cam_freeccb(ccb); } void mode_select(struct cam_device *device, int save_pages, int retry_count, int timeout, u_int8_t *data, int datalen) { union ccb *ccb; int retval; ccb = cam_getccb(device); if (ccb == NULL) errx(1, "mode_select: couldn't allocate CCB"); bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); scsi_mode_select(&ccb->csio, /* retries */ retry_count, /* cbfcnp */ NULL, /* tag_action */ MSG_SIMPLE_Q_TAG, /* scsi_page_fmt */ 1, /* save_pages */ save_pages, /* param_buf */ data, /* param_len */ datalen, /* sense_len */ SSD_FULL_SIZE, /* timeout */ timeout ? timeout : 5000); if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (((retval = cam_send_ccb(device, ccb)) < 0) || ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) { if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } cam_freeccb(ccb); cam_close_device(device); if (retval < 0) err(1, "error sending mode select command"); else errx(1, "error sending mode select command"); } cam_freeccb(ccb); } void modepage(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { int c, mode_page = -1, page_control = 0; int binary = 0, list = 0; while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c) { case 'b': binary = 1; break; case 'd': arglist |= CAM_ARG_DBD; break; case 'e': arglist |= CAM_ARG_MODE_EDIT; break; case 'l': list = 1; break; case 'm': mode_page = strtol(optarg, NULL, 0); if (mode_page < 0) errx(1, "invalid mode page %d", mode_page); break; case 'P': page_control = strtol(optarg, NULL, 0); if ((page_control < 0) || (page_control > 3)) errx(1, "invalid page control field %d", page_control); arglist |= CAM_ARG_PAGE_CNTL; break; default: break; } } if (mode_page == -1 && list == 0) errx(1, "you must specify a mode page!"); if (list) { mode_list(device, page_control, arglist & CAM_ARG_DBD, retry_count, timeout); } else { mode_edit(device, mode_page, page_control, arglist & CAM_ARG_DBD, arglist & CAM_ARG_MODE_EDIT, binary, retry_count, timeout); } } static int scsicmd(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { union ccb *ccb; u_int32_t flags = CAM_DIR_NONE; u_int8_t *data_ptr = NULL; u_int8_t cdb[20]; u_int8_t atacmd[12]; struct get_hook hook; int c, data_bytes = 0; int cdb_len = 0; int atacmd_len = 0; int dmacmd = 0; int fpdmacmd = 0; int need_res = 0; char *datastr = NULL, *tstr, *resstr = NULL; int error = 0; int fd_data = 0, fd_res = 0; int retval; ccb = cam_getccb(device); if (ccb == NULL) { warnx("scsicmd: error allocating ccb"); return(1); } bzero(&(&ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c) { case 'a': tstr = optarg; while (isspace(*tstr) && (*tstr != '\0')) tstr++; hook.argc = argc - optind; hook.argv = argv + optind; hook.got = 0; atacmd_len = buff_encode_visit(atacmd, sizeof(atacmd), tstr, iget, &hook); /* * Increment optind by the number of arguments the * encoding routine processed. After each call to * getopt(3), optind points to the argument that * getopt should process _next_. In this case, * that means it points to the first command string * argument, if there is one. Once we increment * this, it should point to either the next command * line argument, or it should be past the end of * the list. */ optind += hook.got; break; case 'c': tstr = optarg; while (isspace(*tstr) && (*tstr != '\0')) tstr++; hook.argc = argc - optind; hook.argv = argv + optind; hook.got = 0; cdb_len = buff_encode_visit(cdb, sizeof(cdb), tstr, iget, &hook); /* * Increment optind by the number of arguments the * encoding routine processed. After each call to * getopt(3), optind points to the argument that * getopt should process _next_. In this case, * that means it points to the first command string * argument, if there is one. Once we increment * this, it should point to either the next command * line argument, or it should be past the end of * the list. */ optind += hook.got; break; case 'd': dmacmd = 1; break; case 'f': fpdmacmd = 1; break; case 'i': if (arglist & CAM_ARG_CMD_OUT) { warnx("command must either be " "read or write, not both"); error = 1; goto scsicmd_bailout; } arglist |= CAM_ARG_CMD_IN; flags = CAM_DIR_IN; data_bytes = strtol(optarg, NULL, 0); if (data_bytes <= 0) { warnx("invalid number of input bytes %d", data_bytes); error = 1; goto scsicmd_bailout; } hook.argc = argc - optind; hook.argv = argv + optind; hook.got = 0; optind++; datastr = cget(&hook, NULL); /* * If the user supplied "-" instead of a format, he * wants the data to be written to stdout. */ if ((datastr != NULL) && (datastr[0] == '-')) fd_data = 1; data_ptr = (u_int8_t *)malloc(data_bytes); if (data_ptr == NULL) { warnx("can't malloc memory for data_ptr"); error = 1; goto scsicmd_bailout; } break; case 'o': if (arglist & CAM_ARG_CMD_IN) { warnx("command must either be " "read or write, not both"); error = 1; goto scsicmd_bailout; } arglist |= CAM_ARG_CMD_OUT; flags = CAM_DIR_OUT; data_bytes = strtol(optarg, NULL, 0); if (data_bytes <= 0) { warnx("invalid number of output bytes %d", data_bytes); error = 1; goto scsicmd_bailout; } hook.argc = argc - optind; hook.argv = argv + optind; hook.got = 0; datastr = cget(&hook, NULL); data_ptr = (u_int8_t *)malloc(data_bytes); if (data_ptr == NULL) { warnx("can't malloc memory for data_ptr"); error = 1; goto scsicmd_bailout; } bzero(data_ptr, data_bytes); /* * If the user supplied "-" instead of a format, he * wants the data to be read from stdin. */ if ((datastr != NULL) && (datastr[0] == '-')) fd_data = 1; else buff_encode_visit(data_ptr, data_bytes, datastr, iget, &hook); optind += hook.got; break; case 'r': need_res = 1; hook.argc = argc - optind; hook.argv = argv + optind; hook.got = 0; resstr = cget(&hook, NULL); if ((resstr != NULL) && (resstr[0] == '-')) fd_res = 1; optind += hook.got; break; default: break; } } /* * If fd_data is set, and we're writing to the device, we need to * read the data the user wants written from stdin. */ if ((fd_data == 1) && (arglist & CAM_ARG_CMD_OUT)) { ssize_t amt_read; int amt_to_read = data_bytes; u_int8_t *buf_ptr = data_ptr; for (amt_read = 0; amt_to_read > 0; amt_read = read(STDIN_FILENO, buf_ptr, amt_to_read)) { if (amt_read == -1) { warn("error reading data from stdin"); error = 1; goto scsicmd_bailout; } amt_to_read -= amt_read; buf_ptr += amt_read; } } if (arglist & CAM_ARG_ERR_RECOVER) flags |= CAM_PASS_ERR_RECOVER; /* Disable freezing the device queue */ flags |= CAM_DEV_QFRZDIS; if (cdb_len) { /* * This is taken from the SCSI-3 draft spec. * (T10/1157D revision 0.3) * The top 3 bits of an opcode are the group code. * The next 5 bits are the command code. * Group 0: six byte commands * Group 1: ten byte commands * Group 2: ten byte commands * Group 3: reserved * Group 4: sixteen byte commands * Group 5: twelve byte commands * Group 6: vendor specific * Group 7: vendor specific */ switch((cdb[0] >> 5) & 0x7) { case 0: cdb_len = 6; break; case 1: case 2: cdb_len = 10; break; case 3: case 6: case 7: /* computed by buff_encode_visit */ break; case 4: cdb_len = 16; break; case 5: cdb_len = 12; break; } /* * We should probably use csio_build_visit or something like that * here, but it's easier to encode arguments as you go. The * alternative would be skipping the CDB argument and then encoding * it here, since we've got the data buffer argument by now. */ bcopy(cdb, &ccb->csio.cdb_io.cdb_bytes, cdb_len); cam_fill_csio(&ccb->csio, /*retries*/ retry_count, /*cbfcnp*/ NULL, /*flags*/ flags, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*data_ptr*/ data_ptr, /*dxfer_len*/ data_bytes, /*sense_len*/ SSD_FULL_SIZE, /*cdb_len*/ cdb_len, /*timeout*/ timeout ? timeout : 5000); } else { atacmd_len = 12; bcopy(atacmd, &ccb->ataio.cmd.command, atacmd_len); if (need_res) ccb->ataio.cmd.flags |= CAM_ATAIO_NEEDRESULT; if (dmacmd) ccb->ataio.cmd.flags |= CAM_ATAIO_DMA; if (fpdmacmd) ccb->ataio.cmd.flags |= CAM_ATAIO_FPDMA; cam_fill_ataio(&ccb->ataio, /*retries*/ retry_count, /*cbfcnp*/ NULL, /*flags*/ flags, /*tag_action*/ 0, /*data_ptr*/ data_ptr, /*dxfer_len*/ data_bytes, /*timeout*/ timeout ? timeout : 5000); } if (((retval = cam_send_ccb(device, ccb)) < 0) || ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) { const char warnstr[] = "error sending command"; if (retval < 0) warn(warnstr); else warnx(warnstr); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } error = 1; goto scsicmd_bailout; } if (atacmd_len && need_res) { if (fd_res == 0) { buff_decode_visit(&ccb->ataio.res.status, 11, resstr, arg_put, NULL); fprintf(stdout, "\n"); } else { fprintf(stdout, "%02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\n", ccb->ataio.res.status, ccb->ataio.res.error, ccb->ataio.res.lba_low, ccb->ataio.res.lba_mid, ccb->ataio.res.lba_high, ccb->ataio.res.device, ccb->ataio.res.lba_low_exp, ccb->ataio.res.lba_mid_exp, ccb->ataio.res.lba_high_exp, ccb->ataio.res.sector_count, ccb->ataio.res.sector_count_exp); fflush(stdout); } } if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) && (arglist & CAM_ARG_CMD_IN) && (data_bytes > 0)) { if (fd_data == 0) { buff_decode_visit(data_ptr, data_bytes, datastr, arg_put, NULL); fprintf(stdout, "\n"); } else { ssize_t amt_written; int amt_to_write = data_bytes; u_int8_t *buf_ptr = data_ptr; for (amt_written = 0; (amt_to_write > 0) && (amt_written =write(1, buf_ptr,amt_to_write))> 0;){ amt_to_write -= amt_written; buf_ptr += amt_written; } if (amt_written == -1) { warn("error writing data to stdout"); error = 1; goto scsicmd_bailout; } else if ((amt_written == 0) && (amt_to_write > 0)) { warnx("only wrote %u bytes out of %u", data_bytes - amt_to_write, data_bytes); } } } scsicmd_bailout: if ((data_bytes > 0) && (data_ptr != NULL)) free(data_ptr); cam_freeccb(ccb); return(error); } static int camdebug(int argc, char **argv, char *combinedopt) { int c, fd; path_id_t bus = CAM_BUS_WILDCARD; target_id_t target = CAM_TARGET_WILDCARD; lun_id_t lun = CAM_LUN_WILDCARD; char *tstr, *tmpstr = NULL; union ccb ccb; int error = 0; bzero(&ccb, sizeof(union ccb)); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c) { case 'I': arglist |= CAM_ARG_DEBUG_INFO; ccb.cdbg.flags |= CAM_DEBUG_INFO; break; case 'P': arglist |= CAM_ARG_DEBUG_PERIPH; ccb.cdbg.flags |= CAM_DEBUG_PERIPH; break; case 'S': arglist |= CAM_ARG_DEBUG_SUBTRACE; ccb.cdbg.flags |= CAM_DEBUG_SUBTRACE; break; case 'T': arglist |= CAM_ARG_DEBUG_TRACE; ccb.cdbg.flags |= CAM_DEBUG_TRACE; break; case 'X': arglist |= CAM_ARG_DEBUG_XPT; ccb.cdbg.flags |= CAM_DEBUG_XPT; break; case 'c': arglist |= CAM_ARG_DEBUG_CDB; ccb.cdbg.flags |= CAM_DEBUG_CDB; break; case 'p': arglist |= CAM_ARG_DEBUG_PROBE; ccb.cdbg.flags |= CAM_DEBUG_PROBE; break; default: break; } } if ((fd = open(XPT_DEVICE, O_RDWR)) < 0) { warnx("error opening transport layer device %s", XPT_DEVICE); warn("%s", XPT_DEVICE); return(1); } argc -= optind; argv += optind; if (argc <= 0) { warnx("you must specify \"off\", \"all\" or a bus,"); warnx("bus:target, or bus:target:lun"); close(fd); return(1); } tstr = *argv; while (isspace(*tstr) && (*tstr != '\0')) tstr++; if (strncmp(tstr, "off", 3) == 0) { ccb.cdbg.flags = CAM_DEBUG_NONE; arglist &= ~(CAM_ARG_DEBUG_INFO|CAM_ARG_DEBUG_PERIPH| CAM_ARG_DEBUG_TRACE|CAM_ARG_DEBUG_SUBTRACE| CAM_ARG_DEBUG_XPT|CAM_ARG_DEBUG_PROBE); } else if (strncmp(tstr, "all", 3) != 0) { tmpstr = (char *)strtok(tstr, ":"); if ((tmpstr != NULL) && (*tmpstr != '\0')){ bus = strtol(tmpstr, NULL, 0); arglist |= CAM_ARG_BUS; tmpstr = (char *)strtok(NULL, ":"); if ((tmpstr != NULL) && (*tmpstr != '\0')){ target = strtol(tmpstr, NULL, 0); arglist |= CAM_ARG_TARGET; tmpstr = (char *)strtok(NULL, ":"); if ((tmpstr != NULL) && (*tmpstr != '\0')){ lun = strtol(tmpstr, NULL, 0); arglist |= CAM_ARG_LUN; } } } else { error = 1; warnx("you must specify \"all\", \"off\", or a bus,"); warnx("bus:target, or bus:target:lun to debug"); } } if (error == 0) { ccb.ccb_h.func_code = XPT_DEBUG; ccb.ccb_h.path_id = bus; ccb.ccb_h.target_id = target; ccb.ccb_h.target_lun = lun; if (ioctl(fd, CAMIOCOMMAND, &ccb) == -1) { warn("CAMIOCOMMAND ioctl failed"); error = 1; } if (error == 0) { if ((ccb.ccb_h.status & CAM_STATUS_MASK) == CAM_FUNC_NOTAVAIL) { warnx("CAM debugging not available"); warnx("you need to put options CAMDEBUG in" " your kernel config file!"); error = 1; } else if ((ccb.ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { warnx("XPT_DEBUG CCB failed with status %#x", ccb.ccb_h.status); error = 1; } else { if (ccb.cdbg.flags == CAM_DEBUG_NONE) { fprintf(stderr, "Debugging turned off\n"); } else { fprintf(stderr, "Debugging enabled for " "%d:%d:%jx\n", bus, target, (uintmax_t)lun); } } } close(fd); } return(error); } static int tagcontrol(struct cam_device *device, int argc, char **argv, char *combinedopt) { int c; union ccb *ccb; int numtags = -1; int retval = 0; int quiet = 0; char pathstr[1024]; ccb = cam_getccb(device); if (ccb == NULL) { warnx("tagcontrol: error allocating ccb"); return(1); } while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c) { case 'N': numtags = strtol(optarg, NULL, 0); if (numtags < 0) { warnx("tag count %d is < 0", numtags); retval = 1; goto tagcontrol_bailout; } break; case 'q': quiet++; break; default: break; } } cam_path_string(device, pathstr, sizeof(pathstr)); if (numtags >= 0) { bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_relsim) - sizeof(struct ccb_hdr)); ccb->ccb_h.func_code = XPT_REL_SIMQ; ccb->ccb_h.flags = CAM_DEV_QFREEZE; ccb->crs.release_flags = RELSIM_ADJUST_OPENINGS; ccb->crs.openings = numtags; if (cam_send_ccb(device, ccb) < 0) { perror("error sending XPT_REL_SIMQ CCB"); retval = 1; goto tagcontrol_bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { warnx("XPT_REL_SIMQ CCB failed"); cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto tagcontrol_bailout; } if (quiet == 0) fprintf(stdout, "%stagged openings now %d\n", pathstr, ccb->crs.openings); } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_getdevstats) - sizeof(struct ccb_hdr)); ccb->ccb_h.func_code = XPT_GDEV_STATS; if (cam_send_ccb(device, ccb) < 0) { perror("error sending XPT_GDEV_STATS CCB"); retval = 1; goto tagcontrol_bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { warnx("XPT_GDEV_STATS CCB failed"); cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto tagcontrol_bailout; } if (arglist & CAM_ARG_VERBOSE) { fprintf(stdout, "%s", pathstr); fprintf(stdout, "dev_openings %d\n", ccb->cgds.dev_openings); fprintf(stdout, "%s", pathstr); fprintf(stdout, "dev_active %d\n", ccb->cgds.dev_active); fprintf(stdout, "%s", pathstr); fprintf(stdout, "allocated %d\n", ccb->cgds.allocated); fprintf(stdout, "%s", pathstr); fprintf(stdout, "queued %d\n", ccb->cgds.queued); fprintf(stdout, "%s", pathstr); fprintf(stdout, "held %d\n", ccb->cgds.held); fprintf(stdout, "%s", pathstr); fprintf(stdout, "mintags %d\n", ccb->cgds.mintags); fprintf(stdout, "%s", pathstr); fprintf(stdout, "maxtags %d\n", ccb->cgds.maxtags); } else { if (quiet == 0) { fprintf(stdout, "%s", pathstr); fprintf(stdout, "device openings: "); } fprintf(stdout, "%d\n", ccb->cgds.dev_openings + ccb->cgds.dev_active); } tagcontrol_bailout: cam_freeccb(ccb); return(retval); } static void cts_print(struct cam_device *device, struct ccb_trans_settings *cts) { char pathstr[1024]; cam_path_string(device, pathstr, sizeof(pathstr)); if (cts->transport == XPORT_SPI) { struct ccb_trans_settings_spi *spi = &cts->xport_specific.spi; if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) { fprintf(stdout, "%ssync parameter: %d\n", pathstr, spi->sync_period); if (spi->sync_offset != 0) { u_int freq; freq = scsi_calc_syncsrate(spi->sync_period); fprintf(stdout, "%sfrequency: %d.%03dMHz\n", pathstr, freq / 1000, freq % 1000); } } if (spi->valid & CTS_SPI_VALID_SYNC_OFFSET) { fprintf(stdout, "%soffset: %d\n", pathstr, spi->sync_offset); } if (spi->valid & CTS_SPI_VALID_BUS_WIDTH) { fprintf(stdout, "%sbus width: %d bits\n", pathstr, (0x01 << spi->bus_width) * 8); } if (spi->valid & CTS_SPI_VALID_DISC) { fprintf(stdout, "%sdisconnection is %s\n", pathstr, (spi->flags & CTS_SPI_FLAGS_DISC_ENB) ? "enabled" : "disabled"); } } if (cts->transport == XPORT_FC) { struct ccb_trans_settings_fc *fc = &cts->xport_specific.fc; if (fc->valid & CTS_FC_VALID_WWNN) fprintf(stdout, "%sWWNN: 0x%llx\n", pathstr, (long long) fc->wwnn); if (fc->valid & CTS_FC_VALID_WWPN) fprintf(stdout, "%sWWPN: 0x%llx\n", pathstr, (long long) fc->wwpn); if (fc->valid & CTS_FC_VALID_PORT) fprintf(stdout, "%sPortID: 0x%x\n", pathstr, fc->port); if (fc->valid & CTS_FC_VALID_SPEED) fprintf(stdout, "%stransfer speed: %d.%03dMB/s\n", pathstr, fc->bitrate / 1000, fc->bitrate % 1000); } if (cts->transport == XPORT_SAS) { struct ccb_trans_settings_sas *sas = &cts->xport_specific.sas; if (sas->valid & CTS_SAS_VALID_SPEED) fprintf(stdout, "%stransfer speed: %d.%03dMB/s\n", pathstr, sas->bitrate / 1000, sas->bitrate % 1000); } if (cts->transport == XPORT_ATA) { struct ccb_trans_settings_pata *pata = &cts->xport_specific.ata; if ((pata->valid & CTS_ATA_VALID_MODE) != 0) { fprintf(stdout, "%sATA mode: %s\n", pathstr, ata_mode2string(pata->mode)); } if ((pata->valid & CTS_ATA_VALID_ATAPI) != 0) { fprintf(stdout, "%sATAPI packet length: %d\n", pathstr, pata->atapi); } if ((pata->valid & CTS_ATA_VALID_BYTECOUNT) != 0) { fprintf(stdout, "%sPIO transaction length: %d\n", pathstr, pata->bytecount); } } if (cts->transport == XPORT_SATA) { struct ccb_trans_settings_sata *sata = &cts->xport_specific.sata; if ((sata->valid & CTS_SATA_VALID_REVISION) != 0) { fprintf(stdout, "%sSATA revision: %d.x\n", pathstr, sata->revision); } if ((sata->valid & CTS_SATA_VALID_MODE) != 0) { fprintf(stdout, "%sATA mode: %s\n", pathstr, ata_mode2string(sata->mode)); } if ((sata->valid & CTS_SATA_VALID_ATAPI) != 0) { fprintf(stdout, "%sATAPI packet length: %d\n", pathstr, sata->atapi); } if ((sata->valid & CTS_SATA_VALID_BYTECOUNT) != 0) { fprintf(stdout, "%sPIO transaction length: %d\n", pathstr, sata->bytecount); } if ((sata->valid & CTS_SATA_VALID_PM) != 0) { fprintf(stdout, "%sPMP presence: %d\n", pathstr, sata->pm_present); } if ((sata->valid & CTS_SATA_VALID_TAGS) != 0) { fprintf(stdout, "%sNumber of tags: %d\n", pathstr, sata->tags); } if ((sata->valid & CTS_SATA_VALID_CAPS) != 0) { fprintf(stdout, "%sSATA capabilities: %08x\n", pathstr, sata->caps); } } if (cts->protocol == PROTO_ATA) { struct ccb_trans_settings_ata *ata= &cts->proto_specific.ata; if (ata->valid & CTS_ATA_VALID_TQ) { fprintf(stdout, "%stagged queueing: %s\n", pathstr, (ata->flags & CTS_ATA_FLAGS_TAG_ENB) ? "enabled" : "disabled"); } } if (cts->protocol == PROTO_SCSI) { struct ccb_trans_settings_scsi *scsi= &cts->proto_specific.scsi; if (scsi->valid & CTS_SCSI_VALID_TQ) { fprintf(stdout, "%stagged queueing: %s\n", pathstr, (scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) ? "enabled" : "disabled"); } } } /* * Get a path inquiry CCB for the specified device. */ static int get_cpi(struct cam_device *device, struct ccb_pathinq *cpi) { union ccb *ccb; int retval = 0; ccb = cam_getccb(device); if (ccb == NULL) { warnx("get_cpi: couldn't allocate CCB"); return(1); } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_pathinq) - sizeof(struct ccb_hdr)); ccb->ccb_h.func_code = XPT_PATH_INQ; if (cam_send_ccb(device, ccb) < 0) { warn("get_cpi: error sending Path Inquiry CCB"); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto get_cpi_bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto get_cpi_bailout; } bcopy(&ccb->cpi, cpi, sizeof(struct ccb_pathinq)); get_cpi_bailout: cam_freeccb(ccb); return(retval); } /* * Get a get device CCB for the specified device. */ static int get_cgd(struct cam_device *device, struct ccb_getdev *cgd) { union ccb *ccb; int retval = 0; ccb = cam_getccb(device); if (ccb == NULL) { warnx("get_cgd: couldn't allocate CCB"); return(1); } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_pathinq) - sizeof(struct ccb_hdr)); ccb->ccb_h.func_code = XPT_GDEV_TYPE; if (cam_send_ccb(device, ccb) < 0) { warn("get_cgd: error sending Path Inquiry CCB"); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto get_cgd_bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto get_cgd_bailout; } bcopy(&ccb->cgd, cgd, sizeof(struct ccb_getdev)); get_cgd_bailout: cam_freeccb(ccb); return(retval); } /* return the type of disk (really the command type) */ static const char * get_disk_type(struct cam_device *device) { struct ccb_getdev cgd; (void) memset(&cgd, 0x0, sizeof(cgd)); get_cgd(device, &cgd); switch(cgd.protocol) { case PROTO_SCSI: return "scsi"; case PROTO_ATA: case PROTO_ATAPI: case PROTO_SATAPM: return "ata"; default: return "unknown"; } } static void cpi_print(struct ccb_pathinq *cpi) { char adapter_str[1024]; int i; snprintf(adapter_str, sizeof(adapter_str), "%s%d:", cpi->dev_name, cpi->unit_number); fprintf(stdout, "%s SIM/HBA version: %d\n", adapter_str, cpi->version_num); for (i = 1; i < 0xff; i = i << 1) { const char *str; if ((i & cpi->hba_inquiry) == 0) continue; fprintf(stdout, "%s supports ", adapter_str); switch(i) { case PI_MDP_ABLE: str = "MDP message"; break; case PI_WIDE_32: str = "32 bit wide SCSI"; break; case PI_WIDE_16: str = "16 bit wide SCSI"; break; case PI_SDTR_ABLE: str = "SDTR message"; break; case PI_LINKED_CDB: str = "linked CDBs"; break; case PI_TAG_ABLE: str = "tag queue messages"; break; case PI_SOFT_RST: str = "soft reset alternative"; break; case PI_SATAPM: str = "SATA Port Multiplier"; break; default: str = "unknown PI bit set"; break; } fprintf(stdout, "%s\n", str); } for (i = 1; i < 0xff; i = i << 1) { const char *str; if ((i & cpi->hba_misc) == 0) continue; fprintf(stdout, "%s ", adapter_str); switch(i) { case PIM_SCANHILO: str = "bus scans from high ID to low ID"; break; case PIM_NOREMOVE: str = "removable devices not included in scan"; break; case PIM_NOINITIATOR: str = "initiator role not supported"; break; case PIM_NOBUSRESET: str = "user has disabled initial BUS RESET or" " controller is in target/mixed mode"; break; case PIM_NO_6_BYTE: str = "do not send 6-byte commands"; break; case PIM_SEQSCAN: str = "scan bus sequentially"; break; default: str = "unknown PIM bit set"; break; } fprintf(stdout, "%s\n", str); } for (i = 1; i < 0xff; i = i << 1) { const char *str; if ((i & cpi->target_sprt) == 0) continue; fprintf(stdout, "%s supports ", adapter_str); switch(i) { case PIT_PROCESSOR: str = "target mode processor mode"; break; case PIT_PHASE: str = "target mode phase cog. mode"; break; case PIT_DISCONNECT: str = "disconnects in target mode"; break; case PIT_TERM_IO: str = "terminate I/O message in target mode"; break; case PIT_GRP_6: str = "group 6 commands in target mode"; break; case PIT_GRP_7: str = "group 7 commands in target mode"; break; default: str = "unknown PIT bit set"; break; } fprintf(stdout, "%s\n", str); } fprintf(stdout, "%s HBA engine count: %d\n", adapter_str, cpi->hba_eng_cnt); fprintf(stdout, "%s maximum target: %d\n", adapter_str, cpi->max_target); fprintf(stdout, "%s maximum LUN: %d\n", adapter_str, cpi->max_lun); fprintf(stdout, "%s highest path ID in subsystem: %d\n", adapter_str, cpi->hpath_id); fprintf(stdout, "%s initiator ID: %d\n", adapter_str, cpi->initiator_id); fprintf(stdout, "%s SIM vendor: %s\n", adapter_str, cpi->sim_vid); fprintf(stdout, "%s HBA vendor: %s\n", adapter_str, cpi->hba_vid); fprintf(stdout, "%s HBA vendor ID: 0x%04x\n", adapter_str, cpi->hba_vendor); fprintf(stdout, "%s HBA device ID: 0x%04x\n", adapter_str, cpi->hba_device); fprintf(stdout, "%s HBA subvendor ID: 0x%04x\n", adapter_str, cpi->hba_subvendor); fprintf(stdout, "%s HBA subdevice ID: 0x%04x\n", adapter_str, cpi->hba_subdevice); fprintf(stdout, "%s bus ID: %d\n", adapter_str, cpi->bus_id); fprintf(stdout, "%s base transfer speed: ", adapter_str); if (cpi->base_transfer_speed > 1000) fprintf(stdout, "%d.%03dMB/sec\n", cpi->base_transfer_speed / 1000, cpi->base_transfer_speed % 1000); else fprintf(stdout, "%dKB/sec\n", (cpi->base_transfer_speed % 1000) * 1000); fprintf(stdout, "%s maximum transfer size: %u bytes\n", adapter_str, cpi->maxio); } static int get_print_cts(struct cam_device *device, int user_settings, int quiet, struct ccb_trans_settings *cts) { int retval; union ccb *ccb; retval = 0; ccb = cam_getccb(device); if (ccb == NULL) { warnx("get_print_cts: error allocating ccb"); return(1); } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_trans_settings) - sizeof(struct ccb_hdr)); ccb->ccb_h.func_code = XPT_GET_TRAN_SETTINGS; if (user_settings == 0) ccb->cts.type = CTS_TYPE_CURRENT_SETTINGS; else ccb->cts.type = CTS_TYPE_USER_SETTINGS; if (cam_send_ccb(device, ccb) < 0) { perror("error sending XPT_GET_TRAN_SETTINGS CCB"); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto get_print_cts_bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { warnx("XPT_GET_TRANS_SETTINGS CCB failed"); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto get_print_cts_bailout; } if (quiet == 0) cts_print(device, &ccb->cts); if (cts != NULL) bcopy(&ccb->cts, cts, sizeof(struct ccb_trans_settings)); get_print_cts_bailout: cam_freeccb(ccb); return(retval); } static int ratecontrol(struct cam_device *device, int retry_count, int timeout, int argc, char **argv, char *combinedopt) { int c; union ccb *ccb; int user_settings = 0; int retval = 0; int disc_enable = -1, tag_enable = -1; int mode = -1; int offset = -1; double syncrate = -1; int bus_width = -1; int quiet = 0; int change_settings = 0, send_tur = 0; struct ccb_pathinq cpi; ccb = cam_getccb(device); if (ccb == NULL) { warnx("ratecontrol: error allocating ccb"); return(1); } while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c){ case 'a': send_tur = 1; break; case 'c': user_settings = 0; break; case 'D': if (strncasecmp(optarg, "enable", 6) == 0) disc_enable = 1; else if (strncasecmp(optarg, "disable", 7) == 0) disc_enable = 0; else { warnx("-D argument \"%s\" is unknown", optarg); retval = 1; goto ratecontrol_bailout; } change_settings = 1; break; case 'M': mode = ata_string2mode(optarg); if (mode < 0) { warnx("unknown mode '%s'", optarg); retval = 1; goto ratecontrol_bailout; } change_settings = 1; break; case 'O': offset = strtol(optarg, NULL, 0); if (offset < 0) { warnx("offset value %d is < 0", offset); retval = 1; goto ratecontrol_bailout; } change_settings = 1; break; case 'q': quiet++; break; case 'R': syncrate = atof(optarg); if (syncrate < 0) { warnx("sync rate %f is < 0", syncrate); retval = 1; goto ratecontrol_bailout; } change_settings = 1; break; case 'T': if (strncasecmp(optarg, "enable", 6) == 0) tag_enable = 1; else if (strncasecmp(optarg, "disable", 7) == 0) tag_enable = 0; else { warnx("-T argument \"%s\" is unknown", optarg); retval = 1; goto ratecontrol_bailout; } change_settings = 1; break; case 'U': user_settings = 1; break; case 'W': bus_width = strtol(optarg, NULL, 0); if (bus_width < 0) { warnx("bus width %d is < 0", bus_width); retval = 1; goto ratecontrol_bailout; } change_settings = 1; break; default: break; } } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_pathinq) - sizeof(struct ccb_hdr)); /* * Grab path inquiry information, so we can determine whether * or not the initiator is capable of the things that the user * requests. */ ccb->ccb_h.func_code = XPT_PATH_INQ; if (cam_send_ccb(device, ccb) < 0) { perror("error sending XPT_PATH_INQ CCB"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } retval = 1; goto ratecontrol_bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { warnx("XPT_PATH_INQ CCB failed"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } retval = 1; goto ratecontrol_bailout; } bcopy(&ccb->cpi, &cpi, sizeof(struct ccb_pathinq)); bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_trans_settings) - sizeof(struct ccb_hdr)); if (quiet == 0) { fprintf(stdout, "%s parameters:\n", user_settings ? "User" : "Current"); } retval = get_print_cts(device, user_settings, quiet, &ccb->cts); if (retval != 0) goto ratecontrol_bailout; if (arglist & CAM_ARG_VERBOSE) cpi_print(&cpi); if (change_settings) { int didsettings = 0; struct ccb_trans_settings_spi *spi = NULL; struct ccb_trans_settings_pata *pata = NULL; struct ccb_trans_settings_sata *sata = NULL; struct ccb_trans_settings_ata *ata = NULL; struct ccb_trans_settings_scsi *scsi = NULL; if (ccb->cts.transport == XPORT_SPI) spi = &ccb->cts.xport_specific.spi; if (ccb->cts.transport == XPORT_ATA) pata = &ccb->cts.xport_specific.ata; if (ccb->cts.transport == XPORT_SATA) sata = &ccb->cts.xport_specific.sata; if (ccb->cts.protocol == PROTO_ATA) ata = &ccb->cts.proto_specific.ata; if (ccb->cts.protocol == PROTO_SCSI) scsi = &ccb->cts.proto_specific.scsi; ccb->cts.xport_specific.valid = 0; ccb->cts.proto_specific.valid = 0; if (spi && disc_enable != -1) { spi->valid |= CTS_SPI_VALID_DISC; if (disc_enable == 0) spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB; else spi->flags |= CTS_SPI_FLAGS_DISC_ENB; didsettings++; } if (tag_enable != -1) { if ((cpi.hba_inquiry & PI_TAG_ABLE) == 0) { warnx("HBA does not support tagged queueing, " "so you cannot modify tag settings"); retval = 1; goto ratecontrol_bailout; } if (ata) { ata->valid |= CTS_SCSI_VALID_TQ; if (tag_enable == 0) ata->flags &= ~CTS_ATA_FLAGS_TAG_ENB; else ata->flags |= CTS_ATA_FLAGS_TAG_ENB; didsettings++; } else if (scsi) { scsi->valid |= CTS_SCSI_VALID_TQ; if (tag_enable == 0) scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB; else scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB; didsettings++; } } if (spi && offset != -1) { if ((cpi.hba_inquiry & PI_SDTR_ABLE) == 0) { warnx("HBA is not capable of changing offset"); retval = 1; goto ratecontrol_bailout; } spi->valid |= CTS_SPI_VALID_SYNC_OFFSET; spi->sync_offset = offset; didsettings++; } if (spi && syncrate != -1) { int prelim_sync_period; if ((cpi.hba_inquiry & PI_SDTR_ABLE) == 0) { warnx("HBA is not capable of changing " "transfer rates"); retval = 1; goto ratecontrol_bailout; } spi->valid |= CTS_SPI_VALID_SYNC_RATE; /* * The sync rate the user gives us is in MHz. * We need to translate it into KHz for this * calculation. */ syncrate *= 1000; /* * Next, we calculate a "preliminary" sync period * in tenths of a nanosecond. */ if (syncrate == 0) prelim_sync_period = 0; else prelim_sync_period = 10000000 / syncrate; spi->sync_period = scsi_calc_syncparam(prelim_sync_period); didsettings++; } if (sata && syncrate != -1) { if ((cpi.hba_inquiry & PI_SDTR_ABLE) == 0) { warnx("HBA is not capable of changing " "transfer rates"); retval = 1; goto ratecontrol_bailout; } if (!user_settings) { warnx("You can modify only user rate " "settings for SATA"); retval = 1; goto ratecontrol_bailout; } sata->revision = ata_speed2revision(syncrate * 100); if (sata->revision < 0) { warnx("Invalid rate %f", syncrate); retval = 1; goto ratecontrol_bailout; } sata->valid |= CTS_SATA_VALID_REVISION; didsettings++; } if ((pata || sata) && mode != -1) { if ((cpi.hba_inquiry & PI_SDTR_ABLE) == 0) { warnx("HBA is not capable of changing " "transfer rates"); retval = 1; goto ratecontrol_bailout; } if (!user_settings) { warnx("You can modify only user mode " "settings for ATA/SATA"); retval = 1; goto ratecontrol_bailout; } if (pata) { pata->mode = mode; pata->valid |= CTS_ATA_VALID_MODE; } else { sata->mode = mode; sata->valid |= CTS_SATA_VALID_MODE; } didsettings++; } /* * The bus_width argument goes like this: * 0 == 8 bit * 1 == 16 bit * 2 == 32 bit * Therefore, if you shift the number of bits given on the * command line right by 4, you should get the correct * number. */ if (spi && bus_width != -1) { /* * We might as well validate things here with a * decipherable error message, rather than what * will probably be an indecipherable error message * by the time it gets back to us. */ if ((bus_width == 16) && ((cpi.hba_inquiry & PI_WIDE_16) == 0)) { warnx("HBA does not support 16 bit bus width"); retval = 1; goto ratecontrol_bailout; } else if ((bus_width == 32) && ((cpi.hba_inquiry & PI_WIDE_32) == 0)) { warnx("HBA does not support 32 bit bus width"); retval = 1; goto ratecontrol_bailout; } else if ((bus_width != 8) && (bus_width != 16) && (bus_width != 32)) { warnx("Invalid bus width %d", bus_width); retval = 1; goto ratecontrol_bailout; } spi->valid |= CTS_SPI_VALID_BUS_WIDTH; spi->bus_width = bus_width >> 4; didsettings++; } if (didsettings == 0) { goto ratecontrol_bailout; } ccb->ccb_h.func_code = XPT_SET_TRAN_SETTINGS; if (cam_send_ccb(device, ccb) < 0) { perror("error sending XPT_SET_TRAN_SETTINGS CCB"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } retval = 1; goto ratecontrol_bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { warnx("XPT_SET_TRANS_SETTINGS CCB failed"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } retval = 1; goto ratecontrol_bailout; } } if (send_tur) { retval = testunitready(device, retry_count, timeout, (arglist & CAM_ARG_VERBOSE) ? 0 : 1); /* * If the TUR didn't succeed, just bail. */ if (retval != 0) { if (quiet == 0) fprintf(stderr, "Test Unit Ready failed\n"); goto ratecontrol_bailout; } } if ((change_settings || send_tur) && !quiet && (ccb->cts.transport == XPORT_ATA || ccb->cts.transport == XPORT_SATA || send_tur)) { fprintf(stdout, "New parameters:\n"); retval = get_print_cts(device, user_settings, 0, NULL); } ratecontrol_bailout: cam_freeccb(ccb); return(retval); } static int scsiformat(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { union ccb *ccb; int c; int ycount = 0, quiet = 0; int error = 0, retval = 0; int use_timeout = 10800 * 1000; int immediate = 1; struct format_defect_list_header fh; u_int8_t *data_ptr = NULL; u_int32_t dxfer_len = 0; u_int8_t byte2 = 0; int num_warnings = 0; int reportonly = 0; ccb = cam_getccb(device); if (ccb == NULL) { warnx("scsiformat: error allocating ccb"); return(1); } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c) { case 'q': quiet++; break; case 'r': reportonly = 1; break; case 'w': immediate = 0; break; case 'y': ycount++; break; } } if (reportonly) goto doreport; if (quiet == 0) { fprintf(stdout, "You are about to REMOVE ALL DATA from the " "following device:\n"); error = scsidoinquiry(device, argc, argv, combinedopt, retry_count, timeout); if (error != 0) { warnx("scsiformat: error sending inquiry"); goto scsiformat_bailout; } } if (ycount == 0) { if (!get_confirmation()) { error = 1; goto scsiformat_bailout; } } if (timeout != 0) use_timeout = timeout; if (quiet == 0) { fprintf(stdout, "Current format timeout is %d seconds\n", use_timeout / 1000); } /* * If the user hasn't disabled questions and didn't specify a * timeout on the command line, ask them if they want the current * timeout. */ if ((ycount == 0) && (timeout == 0)) { char str[1024]; int new_timeout = 0; fprintf(stdout, "Enter new timeout in seconds or press\n" "return to keep the current timeout [%d] ", use_timeout / 1000); if (fgets(str, sizeof(str), stdin) != NULL) { if (str[0] != '\0') new_timeout = atoi(str); } if (new_timeout != 0) { use_timeout = new_timeout * 1000; fprintf(stdout, "Using new timeout value %d\n", use_timeout / 1000); } } /* * Keep this outside the if block below to silence any unused * variable warnings. */ bzero(&fh, sizeof(fh)); /* * If we're in immediate mode, we've got to include the format * header */ if (immediate != 0) { fh.byte2 = FU_DLH_IMMED; data_ptr = (u_int8_t *)&fh; dxfer_len = sizeof(fh); byte2 = FU_FMT_DATA; } else if (quiet == 0) { fprintf(stdout, "Formatting..."); fflush(stdout); } scsi_format_unit(&ccb->csio, /* retries */ retry_count, /* cbfcnp */ NULL, /* tag_action */ MSG_SIMPLE_Q_TAG, /* byte2 */ byte2, /* ileave */ 0, /* data_ptr */ data_ptr, /* dxfer_len */ dxfer_len, /* sense_len */ SSD_FULL_SIZE, /* timeout */ use_timeout); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (((retval = cam_send_ccb(device, ccb)) < 0) || ((immediate == 0) && ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP))) { const char errstr[] = "error sending format command"; if (retval < 0) warn(errstr); else warnx(errstr); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } error = 1; goto scsiformat_bailout; } /* * If we ran in non-immediate mode, we already checked for errors * above and printed out any necessary information. If we're in * immediate mode, we need to loop through and get status * information periodically. */ if (immediate == 0) { if (quiet == 0) { fprintf(stdout, "Format Complete\n"); } goto scsiformat_bailout; } doreport: do { cam_status status; bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); /* * There's really no need to do error recovery or * retries here, since we're just going to sit in a * loop and wait for the device to finish formatting. */ scsi_test_unit_ready(&ccb->csio, /* retries */ 0, /* cbfcnp */ NULL, /* tag_action */ MSG_SIMPLE_Q_TAG, /* sense_len */ SSD_FULL_SIZE, /* timeout */ 5000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; retval = cam_send_ccb(device, ccb); /* * If we get an error from the ioctl, bail out. SCSI * errors are expected. */ if (retval < 0) { warn("error sending CAMIOCOMMAND ioctl"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } error = 1; goto scsiformat_bailout; } status = ccb->ccb_h.status & CAM_STATUS_MASK; if ((status != CAM_REQ_CMP) && (status == CAM_SCSI_STATUS_ERROR) && ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) != 0)) { struct scsi_sense_data *sense; int error_code, sense_key, asc, ascq; sense = &ccb->csio.sense_data; scsi_extract_sense_len(sense, ccb->csio.sense_len - ccb->csio.sense_resid, &error_code, &sense_key, &asc, &ascq, /*show_errors*/ 1); /* * According to the SCSI-2 and SCSI-3 specs, a * drive that is in the middle of a format should * return NOT READY with an ASC of "logical unit * not ready, format in progress". The sense key * specific bytes will then be a progress indicator. */ if ((sense_key == SSD_KEY_NOT_READY) && (asc == 0x04) && (ascq == 0x04)) { uint8_t sks[3]; if ((scsi_get_sks(sense, ccb->csio.sense_len - ccb->csio.sense_resid, sks) == 0) && (quiet == 0)) { int val; u_int64_t percentage; val = scsi_2btoul(&sks[1]); percentage = 10000 * val; fprintf(stdout, "\rFormatting: %ju.%02u %% " "(%d/%d) done", (uintmax_t)(percentage / (0x10000 * 100)), (unsigned)((percentage / 0x10000) % 100), val, 0x10000); fflush(stdout); } else if ((quiet == 0) && (++num_warnings <= 1)) { warnx("Unexpected SCSI Sense Key " "Specific value returned " "during format:"); scsi_sense_print(device, &ccb->csio, stderr); warnx("Unable to print status " "information, but format will " "proceed."); warnx("will exit when format is " "complete"); } sleep(1); } else { warnx("Unexpected SCSI error during format"); cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); error = 1; goto scsiformat_bailout; } } else if (status != CAM_REQ_CMP) { warnx("Unexpected CAM status %#x", status); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); error = 1; goto scsiformat_bailout; } } while((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP); if (quiet == 0) fprintf(stdout, "\nFormat Complete\n"); scsiformat_bailout: cam_freeccb(ccb); return(error); } static int scsisanitize(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { union ccb *ccb; u_int8_t action = 0; int c; int ycount = 0, quiet = 0; int error = 0, retval = 0; int use_timeout = 10800 * 1000; int immediate = 1; int invert = 0; int passes = 0; int ause = 0; int fd = -1; const char *pattern = NULL; u_int8_t *data_ptr = NULL; u_int32_t dxfer_len = 0; u_int8_t byte2 = 0; int num_warnings = 0; int reportonly = 0; ccb = cam_getccb(device); if (ccb == NULL) { warnx("scsisanitize: error allocating ccb"); return(1); } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch(c) { case 'a': if (strcasecmp(optarg, "overwrite") == 0) action = SSZ_SERVICE_ACTION_OVERWRITE; else if (strcasecmp(optarg, "block") == 0) action = SSZ_SERVICE_ACTION_BLOCK_ERASE; else if (strcasecmp(optarg, "crypto") == 0) action = SSZ_SERVICE_ACTION_CRYPTO_ERASE; else if (strcasecmp(optarg, "exitfailure") == 0) action = SSZ_SERVICE_ACTION_EXIT_MODE_FAILURE; else { warnx("invalid service operation \"%s\"", optarg); error = 1; goto scsisanitize_bailout; } break; case 'c': passes = strtol(optarg, NULL, 0); if (passes < 1 || passes > 31) { warnx("invalid passes value %d", passes); error = 1; goto scsisanitize_bailout; } break; case 'I': invert = 1; break; case 'P': pattern = optarg; break; case 'q': quiet++; break; case 'U': ause = 1; break; case 'r': reportonly = 1; break; case 'w': immediate = 0; break; case 'y': ycount++; break; } } if (reportonly) goto doreport; if (action == 0) { warnx("an action is required"); error = 1; goto scsisanitize_bailout; } else if (action == SSZ_SERVICE_ACTION_OVERWRITE) { struct scsi_sanitize_parameter_list *pl; struct stat sb; ssize_t sz, amt; if (pattern == NULL) { warnx("overwrite action requires -P argument"); error = 1; goto scsisanitize_bailout; } fd = open(pattern, O_RDONLY); if (fd < 0) { warn("cannot open pattern file %s", pattern); error = 1; goto scsisanitize_bailout; } if (fstat(fd, &sb) < 0) { warn("cannot stat pattern file %s", pattern); error = 1; goto scsisanitize_bailout; } sz = sb.st_size; if (sz > SSZPL_MAX_PATTERN_LENGTH) { warnx("pattern file size exceeds maximum value %d", SSZPL_MAX_PATTERN_LENGTH); error = 1; goto scsisanitize_bailout; } dxfer_len = sizeof(*pl) + sz; data_ptr = calloc(1, dxfer_len); if (data_ptr == NULL) { warnx("cannot allocate parameter list buffer"); error = 1; goto scsisanitize_bailout; } amt = read(fd, data_ptr + sizeof(*pl), sz); if (amt < 0) { warn("cannot read pattern file"); error = 1; goto scsisanitize_bailout; } else if (amt != sz) { warnx("short pattern file read"); error = 1; goto scsisanitize_bailout; } pl = (struct scsi_sanitize_parameter_list *)data_ptr; if (passes == 0) pl->byte1 = 1; else pl->byte1 = passes; if (invert != 0) pl->byte1 |= SSZPL_INVERT; scsi_ulto2b(sz, pl->length); } else { const char *arg; if (passes != 0) arg = "-c"; else if (invert != 0) arg = "-I"; else if (pattern != NULL) arg = "-P"; else arg = NULL; if (arg != NULL) { warnx("%s argument only valid with overwrite " "operation", arg); error = 1; goto scsisanitize_bailout; } } if (quiet == 0) { fprintf(stdout, "You are about to REMOVE ALL DATA from the " "following device:\n"); error = scsidoinquiry(device, argc, argv, combinedopt, retry_count, timeout); if (error != 0) { warnx("scsisanitize: error sending inquiry"); goto scsisanitize_bailout; } } if (ycount == 0) { if (!get_confirmation()) { error = 1; goto scsisanitize_bailout; } } if (timeout != 0) use_timeout = timeout; if (quiet == 0) { fprintf(stdout, "Current sanitize timeout is %d seconds\n", use_timeout / 1000); } /* * If the user hasn't disabled questions and didn't specify a * timeout on the command line, ask them if they want the current * timeout. */ if ((ycount == 0) && (timeout == 0)) { char str[1024]; int new_timeout = 0; fprintf(stdout, "Enter new timeout in seconds or press\n" "return to keep the current timeout [%d] ", use_timeout / 1000); if (fgets(str, sizeof(str), stdin) != NULL) { if (str[0] != '\0') new_timeout = atoi(str); } if (new_timeout != 0) { use_timeout = new_timeout * 1000; fprintf(stdout, "Using new timeout value %d\n", use_timeout / 1000); } } byte2 = action; if (ause != 0) byte2 |= SSZ_UNRESTRICTED_EXIT; if (immediate != 0) byte2 |= SSZ_IMMED; scsi_sanitize(&ccb->csio, /* retries */ retry_count, /* cbfcnp */ NULL, /* tag_action */ MSG_SIMPLE_Q_TAG, /* byte2 */ byte2, /* control */ 0, /* data_ptr */ data_ptr, /* dxfer_len */ dxfer_len, /* sense_len */ SSD_FULL_SIZE, /* timeout */ use_timeout); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(device, ccb) < 0) { warn("error sending sanitize command"); error = 1; goto scsisanitize_bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { struct scsi_sense_data *sense; int error_code, sense_key, asc, ascq; if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR) { sense = &ccb->csio.sense_data; scsi_extract_sense_len(sense, ccb->csio.sense_len - ccb->csio.sense_resid, &error_code, &sense_key, &asc, &ascq, /*show_errors*/ 1); if (sense_key == SSD_KEY_ILLEGAL_REQUEST && asc == 0x20 && ascq == 0x00) warnx("sanitize is not supported by " "this device"); else warnx("error sanitizing this device"); } else warnx("error sanitizing this device"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } error = 1; goto scsisanitize_bailout; } /* * If we ran in non-immediate mode, we already checked for errors * above and printed out any necessary information. If we're in * immediate mode, we need to loop through and get status * information periodically. */ if (immediate == 0) { if (quiet == 0) { fprintf(stdout, "Sanitize Complete\n"); } goto scsisanitize_bailout; } doreport: do { cam_status status; bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); /* * There's really no need to do error recovery or * retries here, since we're just going to sit in a * loop and wait for the device to finish sanitizing. */ scsi_test_unit_ready(&ccb->csio, /* retries */ 0, /* cbfcnp */ NULL, /* tag_action */ MSG_SIMPLE_Q_TAG, /* sense_len */ SSD_FULL_SIZE, /* timeout */ 5000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; retval = cam_send_ccb(device, ccb); /* * If we get an error from the ioctl, bail out. SCSI * errors are expected. */ if (retval < 0) { warn("error sending CAMIOCOMMAND ioctl"); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } error = 1; goto scsisanitize_bailout; } status = ccb->ccb_h.status & CAM_STATUS_MASK; if ((status != CAM_REQ_CMP) && (status == CAM_SCSI_STATUS_ERROR) && ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) != 0)) { struct scsi_sense_data *sense; int error_code, sense_key, asc, ascq; sense = &ccb->csio.sense_data; scsi_extract_sense_len(sense, ccb->csio.sense_len - ccb->csio.sense_resid, &error_code, &sense_key, &asc, &ascq, /*show_errors*/ 1); /* * According to the SCSI-3 spec, a drive that is in the * middle of a sanitize should return NOT READY with an * ASC of "logical unit not ready, sanitize in * progress". The sense key specific bytes will then * be a progress indicator. */ if ((sense_key == SSD_KEY_NOT_READY) && (asc == 0x04) && (ascq == 0x1b)) { uint8_t sks[3]; if ((scsi_get_sks(sense, ccb->csio.sense_len - ccb->csio.sense_resid, sks) == 0) && (quiet == 0)) { int val; u_int64_t percentage; val = scsi_2btoul(&sks[1]); percentage = 10000 * val; fprintf(stdout, "\rSanitizing: %ju.%02u %% " "(%d/%d) done", (uintmax_t)(percentage / (0x10000 * 100)), (unsigned)((percentage / 0x10000) % 100), val, 0x10000); fflush(stdout); } else if ((quiet == 0) && (++num_warnings <= 1)) { warnx("Unexpected SCSI Sense Key " "Specific value returned " "during sanitize:"); scsi_sense_print(device, &ccb->csio, stderr); warnx("Unable to print status " "information, but sanitze will " "proceed."); warnx("will exit when sanitize is " "complete"); } sleep(1); } else { warnx("Unexpected SCSI error during sanitize"); cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); error = 1; goto scsisanitize_bailout; } } else if (status != CAM_REQ_CMP) { warnx("Unexpected CAM status %#x", status); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); error = 1; goto scsisanitize_bailout; } } while((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP); if (quiet == 0) fprintf(stdout, "\nSanitize Complete\n"); scsisanitize_bailout: if (fd >= 0) close(fd); if (data_ptr != NULL) free(data_ptr); cam_freeccb(ccb); return(error); } static int scsireportluns(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { union ccb *ccb; int c, countonly, lunsonly; struct scsi_report_luns_data *lundata; int alloc_len; uint8_t report_type; uint32_t list_len, i, j; int retval; retval = 0; lundata = NULL; report_type = RPL_REPORT_DEFAULT; ccb = cam_getccb(device); if (ccb == NULL) { warnx("%s: error allocating ccb", __func__); return (1); } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); countonly = 0; lunsonly = 0; while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'c': countonly++; break; case 'l': lunsonly++; break; case 'r': if (strcasecmp(optarg, "default") == 0) report_type = RPL_REPORT_DEFAULT; else if (strcasecmp(optarg, "wellknown") == 0) report_type = RPL_REPORT_WELLKNOWN; else if (strcasecmp(optarg, "all") == 0) report_type = RPL_REPORT_ALL; else { warnx("%s: invalid report type \"%s\"", __func__, optarg); retval = 1; goto bailout; } break; default: break; } } if ((countonly != 0) && (lunsonly != 0)) { warnx("%s: you can only specify one of -c or -l", __func__); retval = 1; goto bailout; } /* * According to SPC-4, the allocation length must be at least 16 * bytes -- enough for the header and one LUN. */ alloc_len = sizeof(*lundata) + 8; retry: lundata = malloc(alloc_len); if (lundata == NULL) { warn("%s: error mallocing %d bytes", __func__, alloc_len); retval = 1; goto bailout; } scsi_report_luns(&ccb->csio, /*retries*/ retry_count, /*cbfcnp*/ NULL, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*select_report*/ report_type, /*rpl_buf*/ lundata, /*alloc_len*/ alloc_len, /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ timeout ? timeout : 5000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(device, ccb) < 0) { warn("error sending REPORT LUNS command"); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto bailout; } list_len = scsi_4btoul(lundata->length); /* * If we need to list the LUNs, and our allocation * length was too short, reallocate and retry. */ if ((countonly == 0) && (list_len > (alloc_len - sizeof(*lundata)))) { alloc_len = list_len + sizeof(*lundata); free(lundata); goto retry; } if (lunsonly == 0) fprintf(stdout, "%u LUN%s found\n", list_len / 8, ((list_len / 8) > 1) ? "s" : ""); if (countonly != 0) goto bailout; for (i = 0; i < (list_len / 8); i++) { int no_more; no_more = 0; for (j = 0; j < sizeof(lundata->luns[i].lundata); j += 2) { if (j != 0) fprintf(stdout, ","); switch (lundata->luns[i].lundata[j] & RPL_LUNDATA_ATYP_MASK) { case RPL_LUNDATA_ATYP_PERIPH: if ((lundata->luns[i].lundata[j] & RPL_LUNDATA_PERIPH_BUS_MASK) != 0) fprintf(stdout, "%d:", lundata->luns[i].lundata[j] & RPL_LUNDATA_PERIPH_BUS_MASK); else if ((j == 0) && ((lundata->luns[i].lundata[j+2] & RPL_LUNDATA_PERIPH_BUS_MASK) == 0)) no_more = 1; fprintf(stdout, "%d", lundata->luns[i].lundata[j+1]); break; case RPL_LUNDATA_ATYP_FLAT: { uint8_t tmplun[2]; tmplun[0] = lundata->luns[i].lundata[j] & RPL_LUNDATA_FLAT_LUN_MASK; tmplun[1] = lundata->luns[i].lundata[j+1]; fprintf(stdout, "%d", scsi_2btoul(tmplun)); no_more = 1; break; } case RPL_LUNDATA_ATYP_LUN: fprintf(stdout, "%d:%d:%d", (lundata->luns[i].lundata[j+1] & RPL_LUNDATA_LUN_BUS_MASK) >> 5, lundata->luns[i].lundata[j] & RPL_LUNDATA_LUN_TARG_MASK, lundata->luns[i].lundata[j+1] & RPL_LUNDATA_LUN_LUN_MASK); break; case RPL_LUNDATA_ATYP_EXTLUN: { int field_len_code, eam_code; eam_code = lundata->luns[i].lundata[j] & RPL_LUNDATA_EXT_EAM_MASK; field_len_code = (lundata->luns[i].lundata[j] & RPL_LUNDATA_EXT_LEN_MASK) >> 4; if ((eam_code == RPL_LUNDATA_EXT_EAM_WK) && (field_len_code == 0x00)) { fprintf(stdout, "%d", lundata->luns[i].lundata[j+1]); } else if ((eam_code == RPL_LUNDATA_EXT_EAM_NOT_SPEC) && (field_len_code == 0x03)) { uint8_t tmp_lun[8]; /* * This format takes up all 8 bytes. * If we aren't starting at offset 0, * that's a bug. */ if (j != 0) { fprintf(stdout, "Invalid " "offset %d for " "Extended LUN not " "specified format", j); no_more = 1; break; } bzero(tmp_lun, sizeof(tmp_lun)); bcopy(&lundata->luns[i].lundata[j+1], &tmp_lun[1], sizeof(tmp_lun) - 1); fprintf(stdout, "%#jx", (intmax_t)scsi_8btou64(tmp_lun)); no_more = 1; } else { fprintf(stderr, "Unknown Extended LUN" "Address method %#x, length " "code %#x", eam_code, field_len_code); no_more = 1; } break; } default: fprintf(stderr, "Unknown LUN address method " "%#x\n", lundata->luns[i].lundata[0] & RPL_LUNDATA_ATYP_MASK); break; } /* * For the flat addressing method, there are no * other levels after it. */ if (no_more != 0) break; } fprintf(stdout, "\n"); } bailout: cam_freeccb(ccb); free(lundata); return (retval); } static int scsireadcapacity(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { union ccb *ccb; int blocksizeonly, humanize, numblocks, quiet, sizeonly, baseten; struct scsi_read_capacity_data rcap; struct scsi_read_capacity_data_long rcaplong; uint64_t maxsector; uint32_t block_len; int retval; int c; blocksizeonly = 0; humanize = 0; numblocks = 0; quiet = 0; sizeonly = 0; baseten = 0; retval = 0; ccb = cam_getccb(device); if (ccb == NULL) { warnx("%s: error allocating ccb", __func__); return (1); } bzero(&(&ccb->ccb_h)[1], sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr)); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'b': blocksizeonly++; break; case 'h': humanize++; baseten = 0; break; case 'H': humanize++; baseten++; break; case 'N': numblocks++; break; case 'q': quiet++; break; case 's': sizeonly++; break; default: break; } } if ((blocksizeonly != 0) && (numblocks != 0)) { warnx("%s: you can only specify one of -b or -N", __func__); retval = 1; goto bailout; } if ((blocksizeonly != 0) && (sizeonly != 0)) { warnx("%s: you can only specify one of -b or -s", __func__); retval = 1; goto bailout; } if ((humanize != 0) && (quiet != 0)) { warnx("%s: you can only specify one of -h/-H or -q", __func__); retval = 1; goto bailout; } if ((humanize != 0) && (blocksizeonly != 0)) { warnx("%s: you can only specify one of -h/-H or -b", __func__); retval = 1; goto bailout; } scsi_read_capacity(&ccb->csio, /*retries*/ retry_count, /*cbfcnp*/ NULL, /*tag_action*/ MSG_SIMPLE_Q_TAG, &rcap, SSD_FULL_SIZE, /*timeout*/ timeout ? timeout : 5000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(device, ccb) < 0) { warn("error sending READ CAPACITY command"); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto bailout; } maxsector = scsi_4btoul(rcap.addr); block_len = scsi_4btoul(rcap.length); /* * A last block of 2^32-1 means that the true capacity is over 2TB, * and we need to issue the long READ CAPACITY to get the real * capacity. Otherwise, we're all set. */ if (maxsector != 0xffffffff) goto do_print; scsi_read_capacity_16(&ccb->csio, /*retries*/ retry_count, /*cbfcnp*/ NULL, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*lba*/ 0, /*reladdr*/ 0, /*pmi*/ 0, /*rcap_buf*/ (uint8_t *)&rcaplong, /*rcap_buf_len*/ sizeof(rcaplong), /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ timeout ? timeout : 5000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(device, ccb) < 0) { warn("error sending READ CAPACITY (16) command"); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto bailout; } maxsector = scsi_8btou64(rcaplong.addr); block_len = scsi_4btoul(rcaplong.length); do_print: if (blocksizeonly == 0) { /* * Humanize implies !quiet, and also implies numblocks. */ if (humanize != 0) { char tmpstr[6]; int64_t tmpbytes; int ret; tmpbytes = (maxsector + 1) * block_len; ret = humanize_number(tmpstr, sizeof(tmpstr), tmpbytes, "", HN_AUTOSCALE, HN_B | HN_DECIMAL | ((baseten != 0) ? HN_DIVISOR_1000 : 0)); if (ret == -1) { warnx("%s: humanize_number failed!", __func__); retval = 1; goto bailout; } fprintf(stdout, "Device Size: %s%s", tmpstr, (sizeonly == 0) ? ", " : "\n"); } else if (numblocks != 0) { fprintf(stdout, "%s%ju%s", (quiet == 0) ? "Blocks: " : "", (uintmax_t)maxsector + 1, (sizeonly == 0) ? ", " : "\n"); } else { fprintf(stdout, "%s%ju%s", (quiet == 0) ? "Last Block: " : "", (uintmax_t)maxsector, (sizeonly == 0) ? ", " : "\n"); } } if (sizeonly == 0) fprintf(stdout, "%s%u%s\n", (quiet == 0) ? "Block Length: " : "", block_len, (quiet == 0) ? " bytes" : ""); bailout: cam_freeccb(ccb); return (retval); } static int smpcmd(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { int c, error = 0; union ccb *ccb; uint8_t *smp_request = NULL, *smp_response = NULL; int request_size = 0, response_size = 0; int fd_request = 0, fd_response = 0; char *datastr = NULL; struct get_hook hook; int retval; int flags = 0; /* * Note that at the moment we don't support sending SMP CCBs to * devices that aren't probed by CAM. */ ccb = cam_getccb(device); if (ccb == NULL) { warnx("%s: error allocating CCB", __func__); return (1); } bzero(&(&ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'R': arglist |= CAM_ARG_CMD_IN; response_size = strtol(optarg, NULL, 0); if (response_size <= 0) { warnx("invalid number of response bytes %d", response_size); error = 1; goto smpcmd_bailout; } hook.argc = argc - optind; hook.argv = argv + optind; hook.got = 0; optind++; datastr = cget(&hook, NULL); /* * If the user supplied "-" instead of a format, he * wants the data to be written to stdout. */ if ((datastr != NULL) && (datastr[0] == '-')) fd_response = 1; smp_response = (u_int8_t *)malloc(response_size); if (smp_response == NULL) { warn("can't malloc memory for SMP response"); error = 1; goto smpcmd_bailout; } break; case 'r': arglist |= CAM_ARG_CMD_OUT; request_size = strtol(optarg, NULL, 0); if (request_size <= 0) { warnx("invalid number of request bytes %d", request_size); error = 1; goto smpcmd_bailout; } hook.argc = argc - optind; hook.argv = argv + optind; hook.got = 0; datastr = cget(&hook, NULL); smp_request = (u_int8_t *)malloc(request_size); if (smp_request == NULL) { warn("can't malloc memory for SMP request"); error = 1; goto smpcmd_bailout; } bzero(smp_request, request_size); /* * If the user supplied "-" instead of a format, he * wants the data to be read from stdin. */ if ((datastr != NULL) && (datastr[0] == '-')) fd_request = 1; else buff_encode_visit(smp_request, request_size, datastr, iget, &hook); optind += hook.got; break; default: break; } } /* * If fd_data is set, and we're writing to the device, we need to * read the data the user wants written from stdin. */ if ((fd_request == 1) && (arglist & CAM_ARG_CMD_OUT)) { ssize_t amt_read; int amt_to_read = request_size; u_int8_t *buf_ptr = smp_request; for (amt_read = 0; amt_to_read > 0; amt_read = read(STDIN_FILENO, buf_ptr, amt_to_read)) { if (amt_read == -1) { warn("error reading data from stdin"); error = 1; goto smpcmd_bailout; } amt_to_read -= amt_read; buf_ptr += amt_read; } } if (((arglist & CAM_ARG_CMD_IN) == 0) || ((arglist & CAM_ARG_CMD_OUT) == 0)) { warnx("%s: need both the request (-r) and response (-R) " "arguments", __func__); error = 1; goto smpcmd_bailout; } flags |= CAM_DEV_QFRZDIS; cam_fill_smpio(&ccb->smpio, /*retries*/ retry_count, /*cbfcnp*/ NULL, /*flags*/ flags, /*smp_request*/ smp_request, /*smp_request_len*/ request_size, /*smp_response*/ smp_response, /*smp_response_len*/ response_size, /*timeout*/ timeout ? timeout : 5000); ccb->smpio.flags = SMP_FLAG_NONE; if (((retval = cam_send_ccb(device, ccb)) < 0) || ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) { const char warnstr[] = "error sending command"; if (retval < 0) warn(warnstr); else warnx(warnstr); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } } if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) && (response_size > 0)) { if (fd_response == 0) { buff_decode_visit(smp_response, response_size, datastr, arg_put, NULL); fprintf(stdout, "\n"); } else { ssize_t amt_written; int amt_to_write = response_size; u_int8_t *buf_ptr = smp_response; for (amt_written = 0; (amt_to_write > 0) && (amt_written = write(STDOUT_FILENO, buf_ptr, amt_to_write)) > 0;){ amt_to_write -= amt_written; buf_ptr += amt_written; } if (amt_written == -1) { warn("error writing data to stdout"); error = 1; goto smpcmd_bailout; } else if ((amt_written == 0) && (amt_to_write > 0)) { warnx("only wrote %u bytes out of %u", response_size - amt_to_write, response_size); } } } smpcmd_bailout: if (ccb != NULL) cam_freeccb(ccb); if (smp_request != NULL) free(smp_request); if (smp_response != NULL) free(smp_response); return (error); } static int smpreportgeneral(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { union ccb *ccb; struct smp_report_general_request *request = NULL; struct smp_report_general_response *response = NULL; struct sbuf *sb = NULL; int error = 0; int c, long_response = 0; int retval; /* * Note that at the moment we don't support sending SMP CCBs to * devices that aren't probed by CAM. */ ccb = cam_getccb(device); if (ccb == NULL) { warnx("%s: error allocating CCB", __func__); return (1); } bzero(&(&ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'l': long_response = 1; break; default: break; } } request = malloc(sizeof(*request)); if (request == NULL) { warn("%s: unable to allocate %zd bytes", __func__, sizeof(*request)); error = 1; goto bailout; } response = malloc(sizeof(*response)); if (response == NULL) { warn("%s: unable to allocate %zd bytes", __func__, sizeof(*response)); error = 1; goto bailout; } try_long: smp_report_general(&ccb->smpio, retry_count, /*cbfcnp*/ NULL, request, /*request_len*/ sizeof(*request), (uint8_t *)response, /*response_len*/ sizeof(*response), /*long_response*/ long_response, timeout); if (((retval = cam_send_ccb(device, ccb)) < 0) || ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) { const char warnstr[] = "error sending command"; if (retval < 0) warn(warnstr); else warnx(warnstr); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } error = 1; goto bailout; } /* * If the device supports the long response bit, try again and see * if we can get all of the data. */ if ((response->long_response & SMP_RG_LONG_RESPONSE) && (long_response == 0)) { ccb->ccb_h.status = CAM_REQ_INPROG; bzero(&(&ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); long_response = 1; goto try_long; } /* * XXX KDM detect and decode SMP errors here. */ sb = sbuf_new_auto(); if (sb == NULL) { warnx("%s: error allocating sbuf", __func__); goto bailout; } smp_report_general_sbuf(response, sizeof(*response), sb); if (sbuf_finish(sb) != 0) { warnx("%s: sbuf_finish", __func__); goto bailout; } printf("%s", sbuf_data(sb)); bailout: if (ccb != NULL) cam_freeccb(ccb); if (request != NULL) free(request); if (response != NULL) free(response); if (sb != NULL) sbuf_delete(sb); return (error); } static struct camcontrol_opts phy_ops[] = { {"nop", SMP_PC_PHY_OP_NOP, CAM_ARG_NONE, NULL}, {"linkreset", SMP_PC_PHY_OP_LINK_RESET, CAM_ARG_NONE, NULL}, {"hardreset", SMP_PC_PHY_OP_HARD_RESET, CAM_ARG_NONE, NULL}, {"disable", SMP_PC_PHY_OP_DISABLE, CAM_ARG_NONE, NULL}, {"clearerrlog", SMP_PC_PHY_OP_CLEAR_ERR_LOG, CAM_ARG_NONE, NULL}, {"clearaffiliation", SMP_PC_PHY_OP_CLEAR_AFFILIATON, CAM_ARG_NONE,NULL}, {"sataportsel", SMP_PC_PHY_OP_TRANS_SATA_PSS, CAM_ARG_NONE, NULL}, {"clearitnl", SMP_PC_PHY_OP_CLEAR_STP_ITN_LS, CAM_ARG_NONE, NULL}, {"setdevname", SMP_PC_PHY_OP_SET_ATT_DEV_NAME, CAM_ARG_NONE, NULL}, {NULL, 0, 0, NULL} }; static int smpphycontrol(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { union ccb *ccb; struct smp_phy_control_request *request = NULL; struct smp_phy_control_response *response = NULL; int long_response = 0; int retval = 0; int phy = -1; uint32_t phy_operation = SMP_PC_PHY_OP_NOP; int phy_op_set = 0; uint64_t attached_dev_name = 0; int dev_name_set = 0; uint32_t min_plr = 0, max_plr = 0; uint32_t pp_timeout_val = 0; int slumber_partial = 0; int set_pp_timeout_val = 0; int c; /* * Note that at the moment we don't support sending SMP CCBs to * devices that aren't probed by CAM. */ ccb = cam_getccb(device); if (ccb == NULL) { warnx("%s: error allocating CCB", __func__); return (1); } bzero(&(&ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'a': case 'A': case 's': case 'S': { int enable = -1; if (strcasecmp(optarg, "enable") == 0) enable = 1; else if (strcasecmp(optarg, "disable") == 0) enable = 2; else { warnx("%s: Invalid argument %s", __func__, optarg); retval = 1; goto bailout; } switch (c) { case 's': slumber_partial |= enable << SMP_PC_SAS_SLUMBER_SHIFT; break; case 'S': slumber_partial |= enable << SMP_PC_SAS_PARTIAL_SHIFT; break; case 'a': slumber_partial |= enable << SMP_PC_SATA_SLUMBER_SHIFT; break; case 'A': slumber_partial |= enable << SMP_PC_SATA_PARTIAL_SHIFT; break; default: warnx("%s: programmer error", __func__); retval = 1; goto bailout; break; /*NOTREACHED*/ } break; } case 'd': attached_dev_name = (uintmax_t)strtoumax(optarg, NULL,0); dev_name_set = 1; break; case 'l': long_response = 1; break; case 'm': /* * We don't do extensive checking here, so this * will continue to work when new speeds come out. */ min_plr = strtoul(optarg, NULL, 0); if ((min_plr == 0) || (min_plr > 0xf)) { warnx("%s: invalid link rate %x", __func__, min_plr); retval = 1; goto bailout; } break; case 'M': /* * We don't do extensive checking here, so this * will continue to work when new speeds come out. */ max_plr = strtoul(optarg, NULL, 0); if ((max_plr == 0) || (max_plr > 0xf)) { warnx("%s: invalid link rate %x", __func__, max_plr); retval = 1; goto bailout; } break; case 'o': { camcontrol_optret optreturn; cam_argmask argnums; const char *subopt; if (phy_op_set != 0) { warnx("%s: only one phy operation argument " "(-o) allowed", __func__); retval = 1; goto bailout; } phy_op_set = 1; /* * Allow the user to specify the phy operation * numerically, as well as with a name. This will * future-proof it a bit, so options that are added * in future specs can be used. */ if (isdigit(optarg[0])) { phy_operation = strtoul(optarg, NULL, 0); if ((phy_operation == 0) || (phy_operation > 0xff)) { warnx("%s: invalid phy operation %#x", __func__, phy_operation); retval = 1; goto bailout; } break; } optreturn = getoption(phy_ops, optarg, &phy_operation, &argnums, &subopt); if (optreturn == CC_OR_AMBIGUOUS) { warnx("%s: ambiguous option %s", __func__, optarg); usage(0); retval = 1; goto bailout; } else if (optreturn == CC_OR_NOT_FOUND) { warnx("%s: option %s not found", __func__, optarg); usage(0); retval = 1; goto bailout; } break; } case 'p': phy = atoi(optarg); break; case 'T': pp_timeout_val = strtoul(optarg, NULL, 0); if (pp_timeout_val > 15) { warnx("%s: invalid partial pathway timeout " "value %u, need a value less than 16", __func__, pp_timeout_val); retval = 1; goto bailout; } set_pp_timeout_val = 1; break; default: break; } } if (phy == -1) { warnx("%s: a PHY (-p phy) argument is required",__func__); retval = 1; goto bailout; } if (((dev_name_set != 0) && (phy_operation != SMP_PC_PHY_OP_SET_ATT_DEV_NAME)) || ((phy_operation == SMP_PC_PHY_OP_SET_ATT_DEV_NAME) && (dev_name_set == 0))) { warnx("%s: -d name and -o setdevname arguments both " "required to set device name", __func__); retval = 1; goto bailout; } request = malloc(sizeof(*request)); if (request == NULL) { warn("%s: unable to allocate %zd bytes", __func__, sizeof(*request)); retval = 1; goto bailout; } response = malloc(sizeof(*response)); if (response == NULL) { warn("%s: unable to allocate %zd bytes", __func__, sizeof(*request)); retval = 1; goto bailout; } smp_phy_control(&ccb->smpio, retry_count, /*cbfcnp*/ NULL, request, sizeof(*request), (uint8_t *)response, sizeof(*response), long_response, /*expected_exp_change_count*/ 0, phy, phy_operation, (set_pp_timeout_val != 0) ? 1 : 0, attached_dev_name, min_plr, max_plr, slumber_partial, pp_timeout_val, timeout); if (((retval = cam_send_ccb(device, ccb)) < 0) || ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) { const char warnstr[] = "error sending command"; if (retval < 0) warn(warnstr); else warnx(warnstr); if (arglist & CAM_ARG_VERBOSE) { /* * Use CAM_EPF_NORMAL so we only get one line of * SMP command decoding. */ cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_NORMAL, stderr); } retval = 1; goto bailout; } /* XXX KDM print out something here for success? */ bailout: if (ccb != NULL) cam_freeccb(ccb); if (request != NULL) free(request); if (response != NULL) free(response); return (retval); } static int smpmaninfo(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { union ccb *ccb; struct smp_report_manuf_info_request request; struct smp_report_manuf_info_response response; struct sbuf *sb = NULL; int long_response = 0; int retval = 0; int c; /* * Note that at the moment we don't support sending SMP CCBs to * devices that aren't probed by CAM. */ ccb = cam_getccb(device); if (ccb == NULL) { warnx("%s: error allocating CCB", __func__); return (1); } bzero(&(&ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'l': long_response = 1; break; default: break; } } bzero(&request, sizeof(request)); bzero(&response, sizeof(response)); smp_report_manuf_info(&ccb->smpio, retry_count, /*cbfcnp*/ NULL, &request, sizeof(request), (uint8_t *)&response, sizeof(response), long_response, timeout); if (((retval = cam_send_ccb(device, ccb)) < 0) || ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) { const char warnstr[] = "error sending command"; if (retval < 0) warn(warnstr); else warnx(warnstr); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } retval = 1; goto bailout; } sb = sbuf_new_auto(); if (sb == NULL) { warnx("%s: error allocating sbuf", __func__); goto bailout; } smp_report_manuf_info_sbuf(&response, sizeof(response), sb); if (sbuf_finish(sb) != 0) { warnx("%s: sbuf_finish", __func__); goto bailout; } printf("%s", sbuf_data(sb)); bailout: if (ccb != NULL) cam_freeccb(ccb); if (sb != NULL) sbuf_delete(sb); return (retval); } static int getdevid(struct cam_devitem *item) { int retval = 0; union ccb *ccb = NULL; struct cam_device *dev; dev = cam_open_btl(item->dev_match.path_id, item->dev_match.target_id, item->dev_match.target_lun, O_RDWR, NULL); if (dev == NULL) { warnx("%s", cam_errbuf); retval = 1; goto bailout; } item->device_id_len = 0; ccb = cam_getccb(dev); if (ccb == NULL) { warnx("%s: error allocating CCB", __func__); retval = 1; goto bailout; } bzero(&(&ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); /* * On the first try, we just probe for the size of the data, and * then allocate that much memory and try again. */ retry: ccb->ccb_h.func_code = XPT_DEV_ADVINFO; ccb->ccb_h.flags = CAM_DIR_IN; ccb->cdai.flags = CDAI_FLAG_NONE; ccb->cdai.buftype = CDAI_TYPE_SCSI_DEVID; ccb->cdai.bufsiz = item->device_id_len; if (item->device_id_len != 0) ccb->cdai.buf = (uint8_t *)item->device_id; if (cam_send_ccb(dev, ccb) < 0) { warn("%s: error sending XPT_GDEV_ADVINFO CCB", __func__); retval = 1; goto bailout; } if (ccb->ccb_h.status != CAM_REQ_CMP) { warnx("%s: CAM status %#x", __func__, ccb->ccb_h.status); retval = 1; goto bailout; } if (item->device_id_len == 0) { /* * This is our first time through. Allocate the buffer, * and then go back to get the data. */ if (ccb->cdai.provsiz == 0) { warnx("%s: invalid .provsiz field returned with " "XPT_GDEV_ADVINFO CCB", __func__); retval = 1; goto bailout; } item->device_id_len = ccb->cdai.provsiz; item->device_id = malloc(item->device_id_len); if (item->device_id == NULL) { warn("%s: unable to allocate %d bytes", __func__, item->device_id_len); retval = 1; goto bailout; } ccb->ccb_h.status = CAM_REQ_INPROG; goto retry; } bailout: if (dev != NULL) cam_close_device(dev); if (ccb != NULL) cam_freeccb(ccb); return (retval); } /* * XXX KDM merge this code with getdevtree()? */ static int buildbusdevlist(struct cam_devlist *devlist) { union ccb ccb; int bufsize, fd = -1; struct dev_match_pattern *patterns; struct cam_devitem *item = NULL; int skip_device = 0; int retval = 0; if ((fd = open(XPT_DEVICE, O_RDWR)) == -1) { warn("couldn't open %s", XPT_DEVICE); return(1); } bzero(&ccb, sizeof(union ccb)); ccb.ccb_h.path_id = CAM_XPT_PATH_ID; ccb.ccb_h.target_id = CAM_TARGET_WILDCARD; ccb.ccb_h.target_lun = CAM_LUN_WILDCARD; ccb.ccb_h.func_code = XPT_DEV_MATCH; bufsize = sizeof(struct dev_match_result) * 100; ccb.cdm.match_buf_len = bufsize; ccb.cdm.matches = (struct dev_match_result *)malloc(bufsize); if (ccb.cdm.matches == NULL) { warnx("can't malloc memory for matches"); close(fd); return(1); } ccb.cdm.num_matches = 0; ccb.cdm.num_patterns = 2; ccb.cdm.pattern_buf_len = sizeof(struct dev_match_pattern) * ccb.cdm.num_patterns; patterns = (struct dev_match_pattern *)malloc(ccb.cdm.pattern_buf_len); if (patterns == NULL) { warnx("can't malloc memory for patterns"); retval = 1; goto bailout; } ccb.cdm.patterns = patterns; bzero(patterns, ccb.cdm.pattern_buf_len); patterns[0].type = DEV_MATCH_DEVICE; patterns[0].pattern.device_pattern.flags = DEV_MATCH_PATH; patterns[0].pattern.device_pattern.path_id = devlist->path_id; patterns[1].type = DEV_MATCH_PERIPH; patterns[1].pattern.periph_pattern.flags = PERIPH_MATCH_PATH; patterns[1].pattern.periph_pattern.path_id = devlist->path_id; /* * We do the ioctl multiple times if necessary, in case there are * more than 100 nodes in the EDT. */ do { unsigned int i; if (ioctl(fd, CAMIOCOMMAND, &ccb) == -1) { warn("error sending CAMIOCOMMAND ioctl"); retval = 1; goto bailout; } if ((ccb.ccb_h.status != CAM_REQ_CMP) || ((ccb.cdm.status != CAM_DEV_MATCH_LAST) && (ccb.cdm.status != CAM_DEV_MATCH_MORE))) { warnx("got CAM error %#x, CDM error %d\n", ccb.ccb_h.status, ccb.cdm.status); retval = 1; goto bailout; } for (i = 0; i < ccb.cdm.num_matches; i++) { switch (ccb.cdm.matches[i].type) { case DEV_MATCH_DEVICE: { struct device_match_result *dev_result; dev_result = &ccb.cdm.matches[i].result.device_result; if (dev_result->flags & DEV_RESULT_UNCONFIGURED) { skip_device = 1; break; } else skip_device = 0; item = malloc(sizeof(*item)); if (item == NULL) { warn("%s: unable to allocate %zd bytes", __func__, sizeof(*item)); retval = 1; goto bailout; } bzero(item, sizeof(*item)); bcopy(dev_result, &item->dev_match, sizeof(*dev_result)); STAILQ_INSERT_TAIL(&devlist->dev_queue, item, links); if (getdevid(item) != 0) { retval = 1; goto bailout; } break; } case DEV_MATCH_PERIPH: { struct periph_match_result *periph_result; periph_result = &ccb.cdm.matches[i].result.periph_result; if (skip_device != 0) break; item->num_periphs++; item->periph_matches = realloc( item->periph_matches, item->num_periphs * sizeof(struct periph_match_result)); if (item->periph_matches == NULL) { warn("%s: error allocating periph " "list", __func__); retval = 1; goto bailout; } bcopy(periph_result, &item->periph_matches[ item->num_periphs - 1], sizeof(*periph_result)); break; } default: fprintf(stderr, "%s: unexpected match " "type %d\n", __func__, ccb.cdm.matches[i].type); retval = 1; goto bailout; break; /*NOTREACHED*/ } } } while ((ccb.ccb_h.status == CAM_REQ_CMP) && (ccb.cdm.status == CAM_DEV_MATCH_MORE)); bailout: if (fd != -1) close(fd); free(patterns); free(ccb.cdm.matches); if (retval != 0) freebusdevlist(devlist); return (retval); } static void freebusdevlist(struct cam_devlist *devlist) { struct cam_devitem *item, *item2; STAILQ_FOREACH_SAFE(item, &devlist->dev_queue, links, item2) { STAILQ_REMOVE(&devlist->dev_queue, item, cam_devitem, links); free(item->device_id); free(item->periph_matches); free(item); } } static struct cam_devitem * findsasdevice(struct cam_devlist *devlist, uint64_t sasaddr) { struct cam_devitem *item; STAILQ_FOREACH(item, &devlist->dev_queue, links) { struct scsi_vpd_id_descriptor *idd; /* * XXX KDM look for LUN IDs as well? */ idd = scsi_get_devid(item->device_id, item->device_id_len, scsi_devid_is_sas_target); if (idd == NULL) continue; if (scsi_8btou64(idd->identifier) == sasaddr) return (item); } return (NULL); } static int smpphylist(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { struct smp_report_general_request *rgrequest = NULL; struct smp_report_general_response *rgresponse = NULL; struct smp_discover_request *disrequest = NULL; struct smp_discover_response *disresponse = NULL; struct cam_devlist devlist; union ccb *ccb; int long_response = 0; int num_phys = 0; int quiet = 0; int retval; int i, c; /* * Note that at the moment we don't support sending SMP CCBs to * devices that aren't probed by CAM. */ ccb = cam_getccb(device); if (ccb == NULL) { warnx("%s: error allocating CCB", __func__); return (1); } bzero(&(&ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); STAILQ_INIT(&devlist.dev_queue); rgrequest = malloc(sizeof(*rgrequest)); if (rgrequest == NULL) { warn("%s: unable to allocate %zd bytes", __func__, sizeof(*rgrequest)); retval = 1; goto bailout; } rgresponse = malloc(sizeof(*rgresponse)); if (rgresponse == NULL) { warn("%s: unable to allocate %zd bytes", __func__, sizeof(*rgresponse)); retval = 1; goto bailout; } while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 'l': long_response = 1; break; case 'q': quiet = 1; break; default: break; } } smp_report_general(&ccb->smpio, retry_count, /*cbfcnp*/ NULL, rgrequest, /*request_len*/ sizeof(*rgrequest), (uint8_t *)rgresponse, /*response_len*/ sizeof(*rgresponse), /*long_response*/ long_response, timeout); ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (((retval = cam_send_ccb(device, ccb)) < 0) || ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)) { const char warnstr[] = "error sending command"; if (retval < 0) warn(warnstr); else warnx(warnstr); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } retval = 1; goto bailout; } num_phys = rgresponse->num_phys; if (num_phys == 0) { if (quiet == 0) fprintf(stdout, "%s: No Phys reported\n", __func__); retval = 1; goto bailout; } devlist.path_id = device->path_id; retval = buildbusdevlist(&devlist); if (retval != 0) goto bailout; if (quiet == 0) { fprintf(stdout, "%d PHYs:\n", num_phys); fprintf(stdout, "PHY Attached SAS Address\n"); } disrequest = malloc(sizeof(*disrequest)); if (disrequest == NULL) { warn("%s: unable to allocate %zd bytes", __func__, sizeof(*disrequest)); retval = 1; goto bailout; } disresponse = malloc(sizeof(*disresponse)); if (disresponse == NULL) { warn("%s: unable to allocate %zd bytes", __func__, sizeof(*disresponse)); retval = 1; goto bailout; } for (i = 0; i < num_phys; i++) { struct cam_devitem *item; struct device_match_result *dev_match; char vendor[16], product[48], revision[16]; char tmpstr[256]; int j; bzero(&(&ccb->ccb_h)[1], sizeof(union ccb) - sizeof(struct ccb_hdr)); ccb->ccb_h.status = CAM_REQ_INPROG; ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; smp_discover(&ccb->smpio, retry_count, /*cbfcnp*/ NULL, disrequest, sizeof(*disrequest), (uint8_t *)disresponse, sizeof(*disresponse), long_response, /*ignore_zone_group*/ 0, /*phy*/ i, timeout); if (((retval = cam_send_ccb(device, ccb)) < 0) || (((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) && (disresponse->function_result != SMP_FR_PHY_VACANT))) { const char warnstr[] = "error sending command"; if (retval < 0) warn(warnstr); else warnx(warnstr); if (arglist & CAM_ARG_VERBOSE) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } retval = 1; goto bailout; } if (disresponse->function_result == SMP_FR_PHY_VACANT) { if (quiet == 0) fprintf(stdout, "%3d \n", i); continue; } if (disresponse->attached_device == SMP_DIS_AD_TYPE_NONE) { item = NULL; } else { item = findsasdevice(&devlist, scsi_8btou64(disresponse->attached_sas_address)); } if ((quiet == 0) || (item != NULL)) { fprintf(stdout, "%3d 0x%016jx", i, (uintmax_t)scsi_8btou64( disresponse->attached_sas_address)); if (item == NULL) { fprintf(stdout, "\n"); continue; } } else if (quiet != 0) continue; dev_match = &item->dev_match; if (dev_match->protocol == PROTO_SCSI) { cam_strvis(vendor, dev_match->inq_data.vendor, sizeof(dev_match->inq_data.vendor), sizeof(vendor)); cam_strvis(product, dev_match->inq_data.product, sizeof(dev_match->inq_data.product), sizeof(product)); cam_strvis(revision, dev_match->inq_data.revision, sizeof(dev_match->inq_data.revision), sizeof(revision)); sprintf(tmpstr, "<%s %s %s>", vendor, product, revision); } else if ((dev_match->protocol == PROTO_ATA) || (dev_match->protocol == PROTO_SATAPM)) { cam_strvis(product, dev_match->ident_data.model, sizeof(dev_match->ident_data.model), sizeof(product)); cam_strvis(revision, dev_match->ident_data.revision, sizeof(dev_match->ident_data.revision), sizeof(revision)); sprintf(tmpstr, "<%s %s>", product, revision); } else { sprintf(tmpstr, "<>"); } fprintf(stdout, " %-33s ", tmpstr); /* * If we have 0 periphs, that's a bug... */ if (item->num_periphs == 0) { fprintf(stdout, "\n"); continue; } fprintf(stdout, "("); for (j = 0; j < item->num_periphs; j++) { if (j > 0) fprintf(stdout, ","); fprintf(stdout, "%s%d", item->periph_matches[j].periph_name, item->periph_matches[j].unit_number); } fprintf(stdout, ")\n"); } bailout: if (ccb != NULL) cam_freeccb(ccb); free(rgrequest); free(rgresponse); free(disrequest); free(disresponse); freebusdevlist(&devlist); return (retval); } static int atapm(struct cam_device *device, int argc, char **argv, char *combinedopt, int retry_count, int timeout) { union ccb *ccb; int retval = 0; int t = -1; int c; u_char cmd, sc; ccb = cam_getccb(device); if (ccb == NULL) { warnx("%s: error allocating ccb", __func__); return (1); } while ((c = getopt(argc, argv, combinedopt)) != -1) { switch (c) { case 't': t = atoi(optarg); break; default: break; } } if (strcmp(argv[1], "idle") == 0) { if (t == -1) cmd = ATA_IDLE_IMMEDIATE; else cmd = ATA_IDLE_CMD; } else if (strcmp(argv[1], "standby") == 0) { if (t == -1) cmd = ATA_STANDBY_IMMEDIATE; else cmd = ATA_STANDBY_CMD; } else { cmd = ATA_SLEEP; t = -1; } if (t < 0) sc = 0; else if (t <= (240 * 5)) sc = (t + 4) / 5; else if (t <= (252 * 5)) /* special encoding for 21 minutes */ sc = 252; else if (t <= (11 * 30 * 60)) sc = (t - 1) / (30 * 60) + 241; else sc = 253; cam_fill_ataio(&ccb->ataio, retry_count, NULL, /*flags*/CAM_DIR_NONE, MSG_SIMPLE_Q_TAG, /*data_ptr*/NULL, /*dxfer_len*/0, timeout ? timeout : 30 * 1000); ata_28bit_cmd(&ccb->ataio, cmd, 0, 0, sc); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAM_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(device, ccb) < 0) { warn("error sending command"); if (arglist & CAM_ARG_VERBOSE) cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = 1; goto bailout; } bailout: cam_freeccb(ccb); return (retval); } +static int +ataaxm(struct cam_device *device, int argc, char **argv, + char *combinedopt, int retry_count, int timeout) +{ + union ccb *ccb; + int retval = 0; + int l = -1; + int c; + u_char cmd, sc; + + ccb = cam_getccb(device); + + if (ccb == NULL) { + warnx("%s: error allocating ccb", __func__); + return (1); + } + + while ((c = getopt(argc, argv, combinedopt)) != -1) { + switch (c) { + case 'l': + l = atoi(optarg); + break; + default: + break; + } + } + sc = 0; + if (strcmp(argv[1], "apm") == 0) { + if (l == -1) + cmd = 0x85; + else { + cmd = 0x05; + sc = l; + } + } else /* aam */ { + if (l == -1) + cmd = 0xC2; + else { + cmd = 0x42; + sc = l; + } + } + + retval = ata_do_28bit_cmd(device, + ccb, + /*retries*/retry_count, + /*flags*/CAM_DIR_NONE, + /*protocol*/AP_PROTO_NON_DATA, + /*tag_action*/MSG_SIMPLE_Q_TAG, + /*command*/ATA_SETFEATURES, + /*features*/cmd, + /*lba*/0, + /*sector_count*/sc, + /*data_ptr*/NULL, + /*dxfer_len*/0, + /*timeout*/timeout ? timeout : 30 * 1000, + /*quiet*/1); + + cam_freeccb(ccb); + return (retval); +} + #endif /* MINIMALISTIC */ void usage(int printlong) { fprintf(printlong ? stdout : stderr, "usage: camcontrol [device id][generic args][command args]\n" " camcontrol devlist [-v]\n" #ifndef MINIMALISTIC " camcontrol periphlist [dev_id][-n dev_name] [-u unit]\n" " camcontrol tur [dev_id][generic args]\n" " camcontrol inquiry [dev_id][generic args] [-D] [-S] [-R]\n" " camcontrol identify [dev_id][generic args] [-v]\n" " camcontrol reportluns [dev_id][generic args] [-c] [-l] [-r report]\n" " camcontrol readcap [dev_id][generic args] [-b] [-h] [-H] [-N]\n" " [-q] [-s]\n" " camcontrol start [dev_id][generic args]\n" " camcontrol stop [dev_id][generic args]\n" " camcontrol load [dev_id][generic args]\n" " camcontrol eject [dev_id][generic args]\n" #endif /* MINIMALISTIC */ " camcontrol rescan \n" " camcontrol reset \n" #ifndef MINIMALISTIC " camcontrol defects [dev_id][generic args] <-f format> [-P][-G]\n" " [-q][-s][-S offset][-X]\n" " camcontrol modepage [dev_id][generic args] <-m page | -l>\n" " [-P pagectl][-e | -b][-d]\n" " camcontrol cmd [dev_id][generic args]\n" " <-a cmd [args] | -c cmd [args]>\n" " [-d] [-f] [-i len fmt|-o len fmt [args]] [-r fmt]\n" " camcontrol smpcmd [dev_id][generic args]\n" " <-r len fmt [args]> <-R len fmt [args]>\n" " camcontrol smprg [dev_id][generic args][-l]\n" " camcontrol smppc [dev_id][generic args] <-p phy> [-l]\n" " [-o operation][-d name][-m rate][-M rate]\n" " [-T pp_timeout][-a enable|disable]\n" " [-A enable|disable][-s enable|disable]\n" " [-S enable|disable]\n" " camcontrol smpphylist [dev_id][generic args][-l][-q]\n" " camcontrol smpmaninfo [dev_id][generic args][-l]\n" " camcontrol debug [-I][-P][-T][-S][-X][-c]\n" " \n" " camcontrol tags [dev_id][generic args] [-N tags] [-q] [-v]\n" " camcontrol negotiate [dev_id][generic args] [-a][-c]\n" " [-D ][-M mode][-O offset]\n" " [-q][-R syncrate][-v][-T ]\n" " [-U][-W bus_width]\n" " camcontrol format [dev_id][generic args][-q][-r][-w][-y]\n" " camcontrol sanitize [dev_id][generic args]\n" " [-a overwrite|block|crypto|exitfailure]\n" " [-c passes][-I][-P pattern][-q][-U][-r][-w]\n" " [-y]\n" " camcontrol idle [dev_id][generic args][-t time]\n" " camcontrol standby [dev_id][generic args][-t time]\n" " camcontrol sleep [dev_id][generic args]\n" +" camcontrol apm [dev_id][generic args][-l level]\n" +" camcontrol aam [dev_id][generic args][-l level]\n" " camcontrol fwdownload [dev_id][generic args] <-f fw_image> [-y][-s]\n" " camcontrol security [dev_id][generic args]\n" " <-d pwd | -e pwd | -f | -h pwd | -k pwd>\n" " [-l ] [-q] [-s pwd] [-T timeout]\n" " [-U ] [-y]\n" " camcontrol hpa [dev_id][generic args] [-f] [-l] [-P] [-p pwd]\n" " [-q] [-s max_sectors] [-U pwd] [-y]\n" " camcontrol persist [dev_id][generic args] <-i action|-o action>\n" " [-a][-I tid][-k key][-K sa_key][-p][-R rtp]\n" " [-s scope][-S][-T type][-U]\n" #endif /* MINIMALISTIC */ " camcontrol help\n"); if (!printlong) return; #ifndef MINIMALISTIC fprintf(stdout, "Specify one of the following options:\n" "devlist list all CAM devices\n" "periphlist list all CAM peripheral drivers attached to a device\n" "tur send a test unit ready to the named device\n" "inquiry send a SCSI inquiry command to the named device\n" "identify send a ATA identify command to the named device\n" "reportluns send a SCSI report luns command to the device\n" "readcap send a SCSI read capacity command to the device\n" "start send a Start Unit command to the device\n" "stop send a Stop Unit command to the device\n" "load send a Start Unit command to the device with the load bit set\n" "eject send a Stop Unit command to the device with the eject bit set\n" "rescan rescan all busses, the given bus, or bus:target:lun\n" "reset reset all busses, the given bus, or bus:target:lun\n" "defects read the defect list of the specified device\n" "modepage display or edit (-e) the given mode page\n" "cmd send the given SCSI command, may need -i or -o as well\n" "smpcmd send the given SMP command, requires -o and -i\n" "smprg send the SMP Report General command\n" "smppc send the SMP PHY Control command, requires -p\n" "smpphylist display phys attached to a SAS expander\n" "smpmaninfo send the SMP Report Manufacturer Info command\n" "debug turn debugging on/off for a bus, target, or lun, or all devices\n" "tags report or set the number of transaction slots for a device\n" "negotiate report or set device negotiation parameters\n" "format send the SCSI FORMAT UNIT command to the named device\n" "sanitize send the SCSI SANITIZE command to the named device\n" "idle send the ATA IDLE command to the named device\n" "standby send the ATA STANDBY command to the named device\n" "sleep send the ATA SLEEP command to the named device\n" "fwdownload program firmware of the named device with the given image\n" "security report or send ATA security commands to the named device\n" "persist send the SCSI PERSISTENT RESERVE IN or OUT commands\n" "help this message\n" "Device Identifiers:\n" "bus:target specify the bus and target, lun defaults to 0\n" "bus:target:lun specify the bus, target and lun\n" "deviceUNIT specify the device name, like \"da4\" or \"cd2\"\n" "Generic arguments:\n" "-v be verbose, print out sense information\n" "-t timeout command timeout in seconds, overrides default timeout\n" "-n dev_name specify device name, e.g. \"da\", \"cd\"\n" "-u unit specify unit number, e.g. \"0\", \"5\"\n" "-E have the kernel attempt to perform SCSI error recovery\n" "-C count specify the SCSI command retry count (needs -E to work)\n" "modepage arguments:\n" "-l list all available mode pages\n" "-m page specify the mode page to view or edit\n" "-e edit the specified mode page\n" "-b force view to binary mode\n" "-d disable block descriptors for mode sense\n" "-P pgctl page control field 0-3\n" "defects arguments:\n" "-f format specify defect list format (block, bfi or phys)\n" "-G get the grown defect list\n" "-P get the permanent defect list\n" "inquiry arguments:\n" "-D get the standard inquiry data\n" "-S get the serial number\n" "-R get the transfer rate, etc.\n" "reportluns arguments:\n" "-c only report a count of available LUNs\n" "-l only print out luns, and not a count\n" "-r specify \"default\", \"wellknown\" or \"all\"\n" "readcap arguments\n" "-b only report the blocksize\n" "-h human readable device size, base 2\n" "-H human readable device size, base 10\n" "-N print the number of blocks instead of last block\n" "-q quiet, print numbers only\n" "-s only report the last block/device size\n" "cmd arguments:\n" "-c cdb [args] specify the SCSI CDB\n" "-i len fmt specify input data and input data format\n" "-o len fmt [args] specify output data and output data fmt\n" "smpcmd arguments:\n" "-r len fmt [args] specify the SMP command to be sent\n" "-R len fmt [args] specify SMP response format\n" "smprg arguments:\n" "-l specify the long response format\n" "smppc arguments:\n" "-p phy specify the PHY to operate on\n" "-l specify the long request/response format\n" "-o operation specify the phy control operation\n" "-d name set the attached device name\n" "-m rate set the minimum physical link rate\n" "-M rate set the maximum physical link rate\n" "-T pp_timeout set the partial pathway timeout value\n" "-a enable|disable enable or disable SATA slumber\n" "-A enable|disable enable or disable SATA partial phy power\n" "-s enable|disable enable or disable SAS slumber\n" "-S enable|disable enable or disable SAS partial phy power\n" "smpphylist arguments:\n" "-l specify the long response format\n" "-q only print phys with attached devices\n" "smpmaninfo arguments:\n" "-l specify the long response format\n" "debug arguments:\n" "-I CAM_DEBUG_INFO -- scsi commands, errors, data\n" "-T CAM_DEBUG_TRACE -- routine flow tracking\n" "-S CAM_DEBUG_SUBTRACE -- internal routine command flow\n" "-c CAM_DEBUG_CDB -- print out SCSI CDBs only\n" "tags arguments:\n" "-N tags specify the number of tags to use for this device\n" "-q be quiet, don't report the number of tags\n" "-v report a number of tag-related parameters\n" "negotiate arguments:\n" "-a send a test unit ready after negotiation\n" "-c report/set current negotiation settings\n" "-D \"enable\" or \"disable\" disconnection\n" "-M mode set ATA mode\n" "-O offset set command delay offset\n" "-q be quiet, don't report anything\n" "-R syncrate synchronization rate in MHz\n" "-T \"enable\" or \"disable\" tagged queueing\n" "-U report/set user negotiation settings\n" "-W bus_width set the bus width in bits (8, 16 or 32)\n" "-v also print a Path Inquiry CCB for the controller\n" "format arguments:\n" "-q be quiet, don't print status messages\n" "-r run in report only mode\n" "-w don't send immediate format command\n" "-y don't ask any questions\n" "sanitize arguments:\n" "-a operation operation mode: overwrite, block, crypto or exitfailure\n" "-c passes overwrite passes to perform (1 to 31)\n" "-I invert overwrite pattern after each pass\n" "-P pattern path to overwrite pattern file\n" "-q be quiet, don't print status messages\n" "-r run in report only mode\n" "-U run operation in unrestricted completion exit mode\n" "-w don't send immediate sanitize command\n" "-y don't ask any questions\n" "idle/standby arguments:\n" "-t number of seconds before respective state.\n" "fwdownload arguments:\n" "-f fw_image path to firmware image file\n" "-y don't ask any questions\n" "-s run in simulation mode\n" "-v print info for every firmware segment sent to device\n" "security arguments:\n" "-d pwd disable security using the given password for the selected\n" " user\n" "-e pwd erase the device using the given pwd for the selected user\n" "-f freeze the security configuration of the specified device\n" "-h pwd enhanced erase the device using the given pwd for the\n" " selected user\n" "-k pwd unlock the device using the given pwd for the selected\n" " user\n" "-l specifies which security level to set: high or maximum\n" "-q be quiet, do not print any status messages\n" "-s pwd password the device (enable security) using the given\n" " pwd for the selected user\n" "-T timeout overrides the timeout (seconds) used for erase operation\n" "-U specifies which user to set: user or master\n" "-y don't ask any questions\n" "hpa arguments:\n" "-f freeze the HPA configuration of the device\n" "-l lock the HPA configuration of the device\n" "-P make the HPA max sectors persist\n" "-p pwd Set the HPA configuration password required for unlock\n" " calls\n" "-q be quiet, do not print any status messages\n" "-s sectors configures the maximum user accessible sectors of the\n" " device\n" "-U pwd unlock the HPA configuration of the device\n" "-y don't ask any questions\n" "persist arguments:\n" "-i action specify read_keys, read_reservation, report_cap, or\n" " read_full_status\n" "-o action specify register, register_ignore, reserve, release,\n" " clear, preempt, preempt_abort, register_move, replace_lost\n" "-a set the All Target Ports (ALL_TG_PT) bit\n" "-I tid specify a Transport ID, e.g.: sas,0x1234567812345678\n" "-k key specify the Reservation Key\n" "-K sa_key specify the Service Action Reservation Key\n" "-p set the Activate Persist Through Power Loss bit\n" "-R rtp specify the Relative Target Port\n" "-s scope specify the scope: lun, extent, element or a number\n" "-S specify Transport ID for register, requires -I\n" "-T res_type specify the reservation type: read_shared, wr_ex, rd_ex,\n" " ex_ac, wr_ex_ro, ex_ac_ro, wr_ex_ar, ex_ac_ar\n" "-U unregister the current initiator for register_move\n" ); #endif /* MINIMALISTIC */ } int main(int argc, char **argv) { int c; char *device = NULL; int unit = 0; struct cam_device *cam_dev = NULL; int timeout = 0, retry_count = 1; camcontrol_optret optreturn; char *tstr; const char *mainopt = "C:En:t:u:v"; const char *subopt = NULL; char combinedopt[256]; int error = 0, optstart = 2; int devopen = 1; #ifndef MINIMALISTIC path_id_t bus; target_id_t target; lun_id_t lun; #endif /* MINIMALISTIC */ cmdlist = CAM_CMD_NONE; arglist = CAM_ARG_NONE; if (argc < 2) { usage(0); exit(1); } /* * Get the base option. */ optreturn = getoption(option_table,argv[1], &cmdlist, &arglist,&subopt); if (optreturn == CC_OR_AMBIGUOUS) { warnx("ambiguous option %s", argv[1]); usage(0); exit(1); } else if (optreturn == CC_OR_NOT_FOUND) { warnx("option %s not found", argv[1]); usage(0); exit(1); } /* * Ahh, getopt(3) is a pain. * * This is a gross hack. There really aren't many other good * options (excuse the pun) for parsing options in a situation like * this. getopt is kinda braindead, so you end up having to run * through the options twice, and give each invocation of getopt * the option string for the other invocation. * * You would think that you could just have two groups of options. * The first group would get parsed by the first invocation of * getopt, and the second group would get parsed by the second * invocation of getopt. It doesn't quite work out that way. When * the first invocation of getopt finishes, it leaves optind pointing * to the argument _after_ the first argument in the second group. * So when the second invocation of getopt comes around, it doesn't * recognize the first argument it gets and then bails out. * * A nice alternative would be to have a flag for getopt that says * "just keep parsing arguments even when you encounter an unknown * argument", but there isn't one. So there's no real clean way to * easily parse two sets of arguments without having one invocation * of getopt know about the other. * * Without this hack, the first invocation of getopt would work as * long as the generic arguments are first, but the second invocation * (in the subfunction) would fail in one of two ways. In the case * where you don't set optreset, it would fail because optind may be * pointing to the argument after the one it should be pointing at. * In the case where you do set optreset, and reset optind, it would * fail because getopt would run into the first set of options, which * it doesn't understand. * * All of this would "sort of" work if you could somehow figure out * whether optind had been incremented one option too far. The * mechanics of that, however, are more daunting than just giving * both invocations all of the expect options for either invocation. * * Needless to say, I wouldn't mind if someone invented a better * (non-GPL!) command line parsing interface than getopt. I * wouldn't mind if someone added more knobs to getopt to make it * work better. Who knows, I may talk myself into doing it someday, * if the standards weenies let me. As it is, it just leads to * hackery like this and causes people to avoid it in some cases. * * KDM, September 8th, 1998 */ if (subopt != NULL) sprintf(combinedopt, "%s%s", mainopt, subopt); else sprintf(combinedopt, "%s", mainopt); /* * For these options we do not parse optional device arguments and * we do not open a passthrough device. */ if ((cmdlist == CAM_CMD_RESCAN) || (cmdlist == CAM_CMD_RESET) || (cmdlist == CAM_CMD_DEVTREE) || (cmdlist == CAM_CMD_USAGE) || (cmdlist == CAM_CMD_DEBUG)) devopen = 0; #ifndef MINIMALISTIC if ((devopen == 1) && (argc > 2 && argv[2][0] != '-')) { char name[30]; int rv; if (isdigit(argv[2][0])) { /* device specified as bus:target[:lun] */ rv = parse_btl(argv[2], &bus, &target, &lun, &arglist); if (rv < 2) errx(1, "numeric device specification must " "be either bus:target, or " "bus:target:lun"); /* default to 0 if lun was not specified */ if ((arglist & CAM_ARG_LUN) == 0) { lun = 0; arglist |= CAM_ARG_LUN; } optstart++; } else { if (cam_get_device(argv[2], name, sizeof name, &unit) == -1) errx(1, "%s", cam_errbuf); device = strdup(name); arglist |= CAM_ARG_DEVICE | CAM_ARG_UNIT; optstart++; } } #endif /* MINIMALISTIC */ /* * Start getopt processing at argv[2/3], since we've already * accepted argv[1..2] as the command name, and as a possible * device name. */ optind = optstart; /* * Now we run through the argument list looking for generic * options, and ignoring options that possibly belong to * subfunctions. */ while ((c = getopt(argc, argv, combinedopt))!= -1){ switch(c) { case 'C': retry_count = strtol(optarg, NULL, 0); if (retry_count < 0) errx(1, "retry count %d is < 0", retry_count); arglist |= CAM_ARG_RETRIES; break; case 'E': arglist |= CAM_ARG_ERR_RECOVER; break; case 'n': arglist |= CAM_ARG_DEVICE; tstr = optarg; while (isspace(*tstr) && (*tstr != '\0')) tstr++; device = (char *)strdup(tstr); break; case 't': timeout = strtol(optarg, NULL, 0); if (timeout < 0) errx(1, "invalid timeout %d", timeout); /* Convert the timeout from seconds to ms */ timeout *= 1000; arglist |= CAM_ARG_TIMEOUT; break; case 'u': arglist |= CAM_ARG_UNIT; unit = strtol(optarg, NULL, 0); break; case 'v': arglist |= CAM_ARG_VERBOSE; break; default: break; } } #ifndef MINIMALISTIC /* * For most commands we'll want to open the passthrough device * associated with the specified device. In the case of the rescan * commands, we don't use a passthrough device at all, just the * transport layer device. */ if (devopen == 1) { if (((arglist & (CAM_ARG_BUS|CAM_ARG_TARGET)) == 0) && (((arglist & CAM_ARG_DEVICE) == 0) || ((arglist & CAM_ARG_UNIT) == 0))) { errx(1, "subcommand \"%s\" requires a valid device " "identifier", argv[1]); } if ((cam_dev = ((arglist & (CAM_ARG_BUS | CAM_ARG_TARGET))? cam_open_btl(bus, target, lun, O_RDWR, NULL) : cam_open_spec_device(device,unit,O_RDWR,NULL))) == NULL) errx(1,"%s", cam_errbuf); } #endif /* MINIMALISTIC */ /* * Reset optind to 2, and reset getopt, so these routines can parse * the arguments again. */ optind = optstart; optreset = 1; switch(cmdlist) { #ifndef MINIMALISTIC case CAM_CMD_DEVLIST: error = getdevlist(cam_dev); break; case CAM_CMD_HPA: error = atahpa(cam_dev, retry_count, timeout, argc, argv, combinedopt); break; #endif /* MINIMALISTIC */ case CAM_CMD_DEVTREE: error = getdevtree(argc, argv, combinedopt); break; #ifndef MINIMALISTIC case CAM_CMD_TUR: error = testunitready(cam_dev, retry_count, timeout, 0); break; case CAM_CMD_INQUIRY: error = scsidoinquiry(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_IDENTIFY: error = ataidentify(cam_dev, retry_count, timeout); break; case CAM_CMD_STARTSTOP: error = scsistart(cam_dev, arglist & CAM_ARG_START_UNIT, arglist & CAM_ARG_EJECT, retry_count, timeout); break; #endif /* MINIMALISTIC */ case CAM_CMD_RESCAN: error = dorescan_or_reset(argc, argv, 1); break; case CAM_CMD_RESET: error = dorescan_or_reset(argc, argv, 0); break; #ifndef MINIMALISTIC case CAM_CMD_READ_DEFECTS: error = readdefects(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_MODE_PAGE: modepage(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_SCSI_CMD: error = scsicmd(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_SMP_CMD: error = smpcmd(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_SMP_RG: error = smpreportgeneral(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_SMP_PC: error = smpphycontrol(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_SMP_PHYLIST: error = smpphylist(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_SMP_MANINFO: error = smpmaninfo(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_DEBUG: error = camdebug(argc, argv, combinedopt); break; case CAM_CMD_TAG: error = tagcontrol(cam_dev, argc, argv, combinedopt); break; case CAM_CMD_RATE: error = ratecontrol(cam_dev, retry_count, timeout, argc, argv, combinedopt); break; case CAM_CMD_FORMAT: error = scsiformat(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_REPORTLUNS: error = scsireportluns(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_READCAP: error = scsireadcapacity(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_IDLE: case CAM_CMD_STANDBY: case CAM_CMD_SLEEP: error = atapm(cam_dev, argc, argv, + combinedopt, retry_count, timeout); + break; + case CAM_CMD_APM: + case CAM_CMD_AAM: + error = ataaxm(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_SECURITY: error = atasecurity(cam_dev, retry_count, timeout, argc, argv, combinedopt); break; case CAM_CMD_DOWNLOAD_FW: error = fwdownload(cam_dev, argc, argv, combinedopt, arglist & CAM_ARG_VERBOSE, retry_count, timeout, get_disk_type(cam_dev)); break; case CAM_CMD_SANITIZE: error = scsisanitize(cam_dev, argc, argv, combinedopt, retry_count, timeout); break; case CAM_CMD_PERSIST: error = scsipersist(cam_dev, argc, argv, combinedopt, retry_count, timeout, arglist & CAM_ARG_VERBOSE, arglist & CAM_ARG_ERR_RECOVER); break; #endif /* MINIMALISTIC */ case CAM_CMD_USAGE: usage(1); break; default: usage(0); error = 1; break; } if (cam_dev != NULL) cam_close_device(cam_dev); exit(error); } Index: stable/10 =================================================================== --- stable/10 (revision 280678) +++ stable/10 (revision 280679) Property changes on: stable/10 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r280249