Index: head/sys/mips/conf/QCA955X_BASE
===================================================================
--- head/sys/mips/conf/QCA955X_BASE	(nonexistent)
+++ head/sys/mips/conf/QCA955X_BASE	(revision 279513)
@@ -0,0 +1,147 @@
+#
+# QCA955X_BASE -- Kernel configuration base file for the Qualcomm Atheros
+# QCA955x SoC.
+#
+# This file (and the hints file accompanying it) are not designed to be
+# used by themselves. Instead, users of this file should create a kernel
+# config file which includes this file (which gets the basic hints), then
+# override the default options (adding devices as needed) and adding
+# hints as needed (for example, the GPIO and LAN PHY.)
+#
+# $FreeBSD$
+#
+
+machine         mips mips
+ident		QCA955X_BASE
+cpu		CPU_MIPS74KC
+makeoptions	KERNLOADADDR=0x80050000
+options 	HZ=1000
+
+options		BREAK_TO_DEBUGGER
+options		ALT_BREAK_TO_DEBUGGER
+
+# options		BOOTVERBOSE=10
+
+files		"../atheros/files.ar71xx"
+hints		"QCA955X_BASE.hints"
+
+makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
+# makeoptions	MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_ahb hwpmc"
+makeoptions	MODULES_OVERRIDE=""
+
+options 	DDB
+options 	KDB
+options 	ALQ
+
+options 	SCHED_4BSD		#4BSD scheduler
+options 	INET			#InterNETworking
+#options 	INET6			#InterNETworking
+#options 	NFSCL			#Network Filesystem Client
+options 	PSEUDOFS		#Pseudo-filesystem framework
+options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
+
+# Don't include the SCSI/CAM strings in the default build
+options 	SCSI_NO_SENSE_STRINGS
+options 	SCSI_NO_OP_STRINGS
+
+# .. And no sysctl strings
+options 	NO_SYSCTL_DESCR
+
+# Limit IO size
+options 	NBUF=128
+
+# Limit UMTX hash size
+# options 	UMTX_NUM_CHAINS=64
+
+# PMC
+#options 	HWPMC_HOOKS
+#device		hwpmc
+#device		hwpmc_mips24k
+
+# options 	NFS_LEGACYRPC
+# Debugging for use in -current
+#options 	INVARIANTS
+#options 	INVARIANT_SUPPORT
+#options 	WITNESS
+#options 	WITNESS_SKIPSPIN
+options 	FFS                     #Berkeley Fast Filesystem
+#options 	SOFTUPDATES             #Enable FFS soft updates support
+#options 	UFS_ACL                 #Support for access control lists
+#options 	UFS_DIRHASH             #Improve performance on big directories
+options 	NO_FFS_SNAPSHOT		# We don't require snapshot support
+
+# Wireless NIC cards
+options 	IEEE80211_DEBUG
+options 	IEEE80211_SUPPORT_MESH
+options 	IEEE80211_SUPPORT_TDMA
+options 	IEEE80211_SUPPORT_SUPERG
+options 	IEEE80211_ALQ	# 802.11 ALQ logging support
+device		wlan            # 802.11 support
+device		wlan_wep        # 802.11 WEP support
+device		wlan_ccmp       # 802.11 CCMP support
+device		wlan_tkip       # 802.11 TKIP support
+device		wlan_xauth	# 802.11 hostap support
+
+# ath(4)
+device		ath             # Atheros network device
+device		ath_rate_sample
+device		ath_ahb		# Atheros host bus glue
+options 	ATH_DEBUG
+options 	ATH_DIAGAPI
+option		ATH_ENABLE_11N
+option 		AH_DEBUG_ALQ
+
+#device		ath_hal
+device		ath_ar9300		# AR9330 HAL; no need for the others
+option		AH_DEBUG
+option		AH_SUPPORT_AR5416	# 11n HAL support
+option		AH_SUPPORT_QCA9550	# Chipset support
+option		AH_DEBUG_ALQ
+option		AH_AR5416_INTERRUPT_MITIGATION
+
+device		mii
+device		arge
+options		ARGE_DEBUG
+
+device		usb
+options 	USB_EHCI_BIG_ENDIAN_DESC        # handle big-endian byte order
+options 	USB_DEBUG
+options 	USB_HOST_ALIGN=32		# AR71XX (MIPS in general?) requires this
+device		ehci
+
+device		pci
+# XXX TODO: need to write a qca955x_pci bridge
+# .. since it now handles >1 PCIe bus and the reset
+# registers may have changed a bit.
+# device		ar724x_pci
+
+device		scbus
+device		umass
+device		da
+
+device		spibus
+device		ar71xx_spi
+device		mx25l
+device		ar71xx_wdog
+
+device		uart
+device		uart_ar71xx
+
+device		ar71xx_apb
+# Until some better interrupt handling is shoehorned into qca955x_apb,
+# we'll have to stick to shared interrupts for IP2/IP3 demux.
+# device		qca955x_apb
+
+device		loop
+device		ether
+device		md
+device		bpf
+device		random
+device		if_bridge
+device		gpio
+device		gpioled
+
+#options		KTR
+#options		KTR_MASK=(KTR_INTR)
+#options		KTR_COMPILE=(KTR_INTR)
+#options		KTR_VERBOSE

Property changes on: head/sys/mips/conf/QCA955X_BASE
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property
Index: head/sys/mips/conf/QCA955X_BASE.hints
===================================================================
--- head/sys/mips/conf/QCA955X_BASE.hints	(nonexistent)
+++ head/sys/mips/conf/QCA955X_BASE.hints	(revision 279513)
@@ -0,0 +1,79 @@
+# This file (and the kernel config file accompanying it) are not designed
+# to be used by themselves. Instead, users of this file should create a
+# kernel config file which includes this file (which gets the basic hints),
+# then override the default options (adding devices as needed) and adding
+# hints as needed (for example, the GPIO and LAN PHY.)
+
+# $FreeBSD$
+
+hint.apb.0.at="nexus0"
+# The default APB is on IP6 (irq4); we need to add
+# the two new ones (IP2, IP3) to this and extend
+# the irq ranges appropriately.
+hint.apb.0.irq=4
+
+# uart0
+hint.uart.0.at="apb0"
+# NB: This isn't an ns8250 UART
+hint.uart.0.maddr=0x18020003
+hint.uart.0.msize=0x18
+hint.uart.0.irq=3
+
+# ehci - on IP3
+hint.ehci.0.at="nexus0"
+hint.ehci.0.maddr=0x1b000100
+hint.ehci.0.msize=0x00001000
+hint.ehci.0.irq=1
+
+hint.ehci.1.at="nexus0"
+hint.ehci.1.maddr=0x1b400100
+hint.ehci.1.msize=0x00001000
+hint.ehci.1.irq=1
+
+# PCIe 1: qca955x_int0 (IP2)
+
+# pci - XXX no maddr/msize, grr!
+hint.pcib.0.at="nexus0"
+hint.pcib.0.irq=0
+
+# XXX TODO: PCIe 1: qca955x_int1 (IP3)
+
+# IP4
+hint.arge.0.at="nexus0"
+hint.arge.0.maddr=0x19000000
+hint.arge.0.msize=0x1000
+hint.arge.0.irq=2
+
+# IP5
+hint.arge.1.at="nexus0"
+hint.arge.1.maddr=0x1a000000
+hint.arge.1.msize=0x1000
+hint.arge.1.irq=3
+
+# ath0 - connected via IP2 mux
+hint.ath.0.at="nexus0"
+hint.ath.0.maddr=0x18100000
+hint.ath.0.msize=0x20000
+hint.ath.0.irq=0
+hint.ath.0.vendor_id=0x168c
+hint.ath.0.device_id=0x0039
+# Set this to define where the ath calibration data
+# should be fetched from in physical memory.
+# hint.ath.0.eepromaddr=0x1fff1000
+
+# SPI flash
+hint.spi.0.at="nexus0"
+hint.spi.0.maddr=0x1f000000
+hint.spi.0.msize=0x10
+
+hint.mx25l.0.at="spibus0"
+hint.mx25l.0.cs=0
+
+# Watchdog
+hint.ar71xx_wdog.0.at="nexus0"
+
+# The GPIO function and pin mask is configured per-board
+hint.gpio.0.at="apb0"
+hint.gpio.0.maddr=0x18040000
+hint.gpio.0.msize=0x1000
+hint.gpio.0.irq=2

Property changes on: head/sys/mips/conf/QCA955X_BASE.hints
___________________________________________________________________
Added: svn:keywords
## -0,0 +1 ##
+FreeBSD=%H
\ No newline at end of property