Index: head/sys/dev/pci/pci_pci.c =================================================================== --- head/sys/dev/pci/pci_pci.c (revision 279442) +++ head/sys/dev/pci/pci_pci.c (revision 279443) @@ -1,2095 +1,2128 @@ /*- * Copyright (c) 1994,1995 Stefan Esser, Wolfgang StanglMeier * Copyright (c) 2000 Michael Smith * Copyright (c) 2000 BSDi * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * PCI:PCI bridge support. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "pcib_if.h" static int pcib_probe(device_t dev); static int pcib_suspend(device_t dev); static int pcib_resume(device_t dev); static int pcib_power_for_sleep(device_t pcib, device_t dev, int *pstate); static uint16_t pcib_ari_get_rid(device_t pcib, device_t dev); static uint32_t pcib_read_config(device_t dev, u_int b, u_int s, u_int f, u_int reg, int width); static void pcib_write_config(device_t dev, u_int b, u_int s, u_int f, u_int reg, uint32_t val, int width); static int pcib_ari_maxslots(device_t dev); static int pcib_ari_maxfuncs(device_t dev); static int pcib_try_enable_ari(device_t pcib, device_t dev); +static int pcib_ari_enabled(device_t pcib); +static void pcib_ari_decode_rid(device_t pcib, uint16_t rid, + int *bus, int *slot, int *func); static device_method_t pcib_methods[] = { /* Device interface */ DEVMETHOD(device_probe, pcib_probe), DEVMETHOD(device_attach, pcib_attach), DEVMETHOD(device_detach, bus_generic_detach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, pcib_suspend), DEVMETHOD(device_resume, pcib_resume), /* Bus interface */ DEVMETHOD(bus_read_ivar, pcib_read_ivar), DEVMETHOD(bus_write_ivar, pcib_write_ivar), DEVMETHOD(bus_alloc_resource, pcib_alloc_resource), #ifdef NEW_PCIB DEVMETHOD(bus_adjust_resource, pcib_adjust_resource), DEVMETHOD(bus_release_resource, pcib_release_resource), #else DEVMETHOD(bus_adjust_resource, bus_generic_adjust_resource), DEVMETHOD(bus_release_resource, bus_generic_release_resource), #endif DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), /* pcib interface */ DEVMETHOD(pcib_maxslots, pcib_ari_maxslots), DEVMETHOD(pcib_maxfuncs, pcib_ari_maxfuncs), DEVMETHOD(pcib_read_config, pcib_read_config), DEVMETHOD(pcib_write_config, pcib_write_config), DEVMETHOD(pcib_route_interrupt, pcib_route_interrupt), DEVMETHOD(pcib_alloc_msi, pcib_alloc_msi), DEVMETHOD(pcib_release_msi, pcib_release_msi), DEVMETHOD(pcib_alloc_msix, pcib_alloc_msix), DEVMETHOD(pcib_release_msix, pcib_release_msix), DEVMETHOD(pcib_map_msi, pcib_map_msi), DEVMETHOD(pcib_power_for_sleep, pcib_power_for_sleep), DEVMETHOD(pcib_get_rid, pcib_ari_get_rid), DEVMETHOD(pcib_try_enable_ari, pcib_try_enable_ari), + DEVMETHOD(pcib_ari_enabled, pcib_ari_enabled), + DEVMETHOD(pcib_decode_rid, pcib_ari_decode_rid), DEVMETHOD_END }; static devclass_t pcib_devclass; DEFINE_CLASS_0(pcib, pcib_driver, pcib_methods, sizeof(struct pcib_softc)); DRIVER_MODULE(pcib, pci, pcib_driver, pcib_devclass, NULL, NULL); #ifdef NEW_PCIB SYSCTL_DECL(_hw_pci); static int pci_clear_pcib; SYSCTL_INT(_hw_pci, OID_AUTO, clear_pcib, CTLFLAG_RDTUN, &pci_clear_pcib, 0, "Clear firmware-assigned resources for PCI-PCI bridge I/O windows."); /* * Is a resource from a child device sub-allocated from one of our * resource managers? */ static int pcib_is_resource_managed(struct pcib_softc *sc, int type, struct resource *r) { switch (type) { #ifdef PCI_RES_BUS case PCI_RES_BUS: return (rman_is_region_manager(r, &sc->bus.rman)); #endif case SYS_RES_IOPORT: return (rman_is_region_manager(r, &sc->io.rman)); case SYS_RES_MEMORY: /* Prefetchable resources may live in either memory rman. */ if (rman_get_flags(r) & RF_PREFETCHABLE && rman_is_region_manager(r, &sc->pmem.rman)) return (1); return (rman_is_region_manager(r, &sc->mem.rman)); } return (0); } static int pcib_is_window_open(struct pcib_window *pw) { return (pw->valid && pw->base < pw->limit); } /* * XXX: If RF_ACTIVE did not also imply allocating a bus space tag and * handle for the resource, we could pass RF_ACTIVE up to the PCI bus * when allocating the resource windows and rely on the PCI bus driver * to do this for us. */ static void pcib_activate_window(struct pcib_softc *sc, int type) { PCI_ENABLE_IO(device_get_parent(sc->dev), sc->dev, type); } static void pcib_write_windows(struct pcib_softc *sc, int mask) { device_t dev; uint32_t val; dev = sc->dev; if (sc->io.valid && mask & WIN_IO) { val = pci_read_config(dev, PCIR_IOBASEL_1, 1); if ((val & PCIM_BRIO_MASK) == PCIM_BRIO_32) { pci_write_config(dev, PCIR_IOBASEH_1, sc->io.base >> 16, 2); pci_write_config(dev, PCIR_IOLIMITH_1, sc->io.limit >> 16, 2); } pci_write_config(dev, PCIR_IOBASEL_1, sc->io.base >> 8, 1); pci_write_config(dev, PCIR_IOLIMITL_1, sc->io.limit >> 8, 1); } if (mask & WIN_MEM) { pci_write_config(dev, PCIR_MEMBASE_1, sc->mem.base >> 16, 2); pci_write_config(dev, PCIR_MEMLIMIT_1, sc->mem.limit >> 16, 2); } if (sc->pmem.valid && mask & WIN_PMEM) { val = pci_read_config(dev, PCIR_PMBASEL_1, 2); if ((val & PCIM_BRPM_MASK) == PCIM_BRPM_64) { pci_write_config(dev, PCIR_PMBASEH_1, sc->pmem.base >> 32, 4); pci_write_config(dev, PCIR_PMLIMITH_1, sc->pmem.limit >> 32, 4); } pci_write_config(dev, PCIR_PMBASEL_1, sc->pmem.base >> 16, 2); pci_write_config(dev, PCIR_PMLIMITL_1, sc->pmem.limit >> 16, 2); } } /* * This is used to reject I/O port allocations that conflict with an * ISA alias range. */ static int pcib_is_isa_range(struct pcib_softc *sc, u_long start, u_long end, u_long count) { u_long next_alias; if (!(sc->bridgectl & PCIB_BCR_ISA_ENABLE)) return (0); /* Only check fixed ranges for overlap. */ if (start + count - 1 != end) return (0); /* ISA aliases are only in the lower 64KB of I/O space. */ if (start >= 65536) return (0); /* Check for overlap with 0x000 - 0x0ff as a special case. */ if (start < 0x100) goto alias; /* * If the start address is an alias, the range is an alias. * Otherwise, compute the start of the next alias range and * check if it is before the end of the candidate range. */ if ((start & 0x300) != 0) goto alias; next_alias = (start & ~0x3fful) | 0x100; if (next_alias <= end) goto alias; return (0); alias: if (bootverbose) device_printf(sc->dev, "I/O range %#lx-%#lx overlaps with an ISA alias\n", start, end); return (1); } static void pcib_add_window_resources(struct pcib_window *w, struct resource **res, int count) { struct resource **newarray; int error, i; newarray = malloc(sizeof(struct resource *) * (w->count + count), M_DEVBUF, M_WAITOK); if (w->res != NULL) bcopy(w->res, newarray, sizeof(struct resource *) * w->count); bcopy(res, newarray + w->count, sizeof(struct resource *) * count); free(w->res, M_DEVBUF); w->res = newarray; w->count += count; for (i = 0; i < count; i++) { error = rman_manage_region(&w->rman, rman_get_start(res[i]), rman_get_end(res[i])); if (error) panic("Failed to add resource to rman"); } } typedef void (nonisa_callback)(u_long start, u_long end, void *arg); static void pcib_walk_nonisa_ranges(u_long start, u_long end, nonisa_callback *cb, void *arg) { u_long next_end; /* * If start is within an ISA alias range, move up to the start * of the next non-alias range. As a special case, addresses * in the range 0x000 - 0x0ff should also be skipped since * those are used for various system I/O devices in ISA * systems. */ if (start <= 65535) { if (start < 0x100 || (start & 0x300) != 0) { start &= ~0x3ff; start += 0x400; } } /* ISA aliases are only in the lower 64KB of I/O space. */ while (start <= MIN(end, 65535)) { next_end = MIN(start | 0xff, end); cb(start, next_end, arg); start += 0x400; } if (start <= end) cb(start, end, arg); } static void count_ranges(u_long start, u_long end, void *arg) { int *countp; countp = arg; (*countp)++; } struct alloc_state { struct resource **res; struct pcib_softc *sc; int count, error; }; static void alloc_ranges(u_long start, u_long end, void *arg) { struct alloc_state *as; struct pcib_window *w; int rid; as = arg; if (as->error != 0) return; w = &as->sc->io; rid = w->reg; if (bootverbose) device_printf(as->sc->dev, "allocating non-ISA range %#lx-%#lx\n", start, end); as->res[as->count] = bus_alloc_resource(as->sc->dev, SYS_RES_IOPORT, &rid, start, end, end - start + 1, 0); if (as->res[as->count] == NULL) as->error = ENXIO; else as->count++; } static int pcib_alloc_nonisa_ranges(struct pcib_softc *sc, u_long start, u_long end) { struct alloc_state as; int i, new_count; /* First, see how many ranges we need. */ new_count = 0; pcib_walk_nonisa_ranges(start, end, count_ranges, &new_count); /* Second, allocate the ranges. */ as.res = malloc(sizeof(struct resource *) * new_count, M_DEVBUF, M_WAITOK); as.sc = sc; as.count = 0; as.error = 0; pcib_walk_nonisa_ranges(start, end, alloc_ranges, &as); if (as.error != 0) { for (i = 0; i < as.count; i++) bus_release_resource(sc->dev, SYS_RES_IOPORT, sc->io.reg, as.res[i]); free(as.res, M_DEVBUF); return (as.error); } KASSERT(as.count == new_count, ("%s: count mismatch", __func__)); /* Third, add the ranges to the window. */ pcib_add_window_resources(&sc->io, as.res, as.count); free(as.res, M_DEVBUF); return (0); } static void pcib_alloc_window(struct pcib_softc *sc, struct pcib_window *w, int type, int flags, pci_addr_t max_address) { struct resource *res; char buf[64]; int error, rid; if (max_address != (u_long)max_address) max_address = ~0ul; w->rman.rm_start = 0; w->rman.rm_end = max_address; w->rman.rm_type = RMAN_ARRAY; snprintf(buf, sizeof(buf), "%s %s window", device_get_nameunit(sc->dev), w->name); w->rman.rm_descr = strdup(buf, M_DEVBUF); error = rman_init(&w->rman); if (error) panic("Failed to initialize %s %s rman", device_get_nameunit(sc->dev), w->name); if (!pcib_is_window_open(w)) return; if (w->base > max_address || w->limit > max_address) { device_printf(sc->dev, "initial %s window has too many bits, ignoring\n", w->name); return; } if (type == SYS_RES_IOPORT && sc->bridgectl & PCIB_BCR_ISA_ENABLE) (void)pcib_alloc_nonisa_ranges(sc, w->base, w->limit); else { rid = w->reg; res = bus_alloc_resource(sc->dev, type, &rid, w->base, w->limit, w->limit - w->base + 1, flags); if (res != NULL) pcib_add_window_resources(w, &res, 1); } if (w->res == NULL) { device_printf(sc->dev, "failed to allocate initial %s window: %#jx-%#jx\n", w->name, (uintmax_t)w->base, (uintmax_t)w->limit); w->base = max_address; w->limit = 0; pcib_write_windows(sc, w->mask); return; } pcib_activate_window(sc, type); } /* * Initialize I/O windows. */ static void pcib_probe_windows(struct pcib_softc *sc) { pci_addr_t max; device_t dev; uint32_t val; dev = sc->dev; if (pci_clear_pcib) { pci_write_config(dev, PCIR_IOBASEL_1, 0xff, 1); pci_write_config(dev, PCIR_IOBASEH_1, 0xffff, 2); pci_write_config(dev, PCIR_IOLIMITL_1, 0, 1); pci_write_config(dev, PCIR_IOLIMITH_1, 0, 2); pci_write_config(dev, PCIR_MEMBASE_1, 0xffff, 2); pci_write_config(dev, PCIR_MEMLIMIT_1, 0, 2); pci_write_config(dev, PCIR_PMBASEL_1, 0xffff, 2); pci_write_config(dev, PCIR_PMBASEH_1, 0xffffffff, 4); pci_write_config(dev, PCIR_PMLIMITL_1, 0, 2); pci_write_config(dev, PCIR_PMLIMITH_1, 0, 4); } /* Determine if the I/O port window is implemented. */ val = pci_read_config(dev, PCIR_IOBASEL_1, 1); if (val == 0) { /* * If 'val' is zero, then only 16-bits of I/O space * are supported. */ pci_write_config(dev, PCIR_IOBASEL_1, 0xff, 1); if (pci_read_config(dev, PCIR_IOBASEL_1, 1) != 0) { sc->io.valid = 1; pci_write_config(dev, PCIR_IOBASEL_1, 0, 1); } } else sc->io.valid = 1; /* Read the existing I/O port window. */ if (sc->io.valid) { sc->io.reg = PCIR_IOBASEL_1; sc->io.step = 12; sc->io.mask = WIN_IO; sc->io.name = "I/O port"; if ((val & PCIM_BRIO_MASK) == PCIM_BRIO_32) { sc->io.base = PCI_PPBIOBASE( pci_read_config(dev, PCIR_IOBASEH_1, 2), val); sc->io.limit = PCI_PPBIOLIMIT( pci_read_config(dev, PCIR_IOLIMITH_1, 2), pci_read_config(dev, PCIR_IOLIMITL_1, 1)); max = 0xffffffff; } else { sc->io.base = PCI_PPBIOBASE(0, val); sc->io.limit = PCI_PPBIOLIMIT(0, pci_read_config(dev, PCIR_IOLIMITL_1, 1)); max = 0xffff; } pcib_alloc_window(sc, &sc->io, SYS_RES_IOPORT, 0, max); } /* Read the existing memory window. */ sc->mem.valid = 1; sc->mem.reg = PCIR_MEMBASE_1; sc->mem.step = 20; sc->mem.mask = WIN_MEM; sc->mem.name = "memory"; sc->mem.base = PCI_PPBMEMBASE(0, pci_read_config(dev, PCIR_MEMBASE_1, 2)); sc->mem.limit = PCI_PPBMEMLIMIT(0, pci_read_config(dev, PCIR_MEMLIMIT_1, 2)); pcib_alloc_window(sc, &sc->mem, SYS_RES_MEMORY, 0, 0xffffffff); /* Determine if the prefetchable memory window is implemented. */ val = pci_read_config(dev, PCIR_PMBASEL_1, 2); if (val == 0) { /* * If 'val' is zero, then only 32-bits of memory space * are supported. */ pci_write_config(dev, PCIR_PMBASEL_1, 0xffff, 2); if (pci_read_config(dev, PCIR_PMBASEL_1, 2) != 0) { sc->pmem.valid = 1; pci_write_config(dev, PCIR_PMBASEL_1, 0, 2); } } else sc->pmem.valid = 1; /* Read the existing prefetchable memory window. */ if (sc->pmem.valid) { sc->pmem.reg = PCIR_PMBASEL_1; sc->pmem.step = 20; sc->pmem.mask = WIN_PMEM; sc->pmem.name = "prefetch"; if ((val & PCIM_BRPM_MASK) == PCIM_BRPM_64) { sc->pmem.base = PCI_PPBMEMBASE( pci_read_config(dev, PCIR_PMBASEH_1, 4), val); sc->pmem.limit = PCI_PPBMEMLIMIT( pci_read_config(dev, PCIR_PMLIMITH_1, 4), pci_read_config(dev, PCIR_PMLIMITL_1, 2)); max = 0xffffffffffffffff; } else { sc->pmem.base = PCI_PPBMEMBASE(0, val); sc->pmem.limit = PCI_PPBMEMLIMIT(0, pci_read_config(dev, PCIR_PMLIMITL_1, 2)); max = 0xffffffff; } pcib_alloc_window(sc, &sc->pmem, SYS_RES_MEMORY, RF_PREFETCHABLE, max); } } #ifdef PCI_RES_BUS /* * Allocate a suitable secondary bus for this bridge if needed and * initialize the resource manager for the secondary bus range. Note * that the minimum count is a desired value and this may allocate a * smaller range. */ void pcib_setup_secbus(device_t dev, struct pcib_secbus *bus, int min_count) { char buf[64]; int error, rid; switch (pci_read_config(dev, PCIR_HDRTYPE, 1) & PCIM_HDRTYPE) { case PCIM_HDRTYPE_BRIDGE: bus->sub_reg = PCIR_SUBBUS_1; break; case PCIM_HDRTYPE_CARDBUS: bus->sub_reg = PCIR_SUBBUS_2; break; default: panic("not a PCI bridge"); } bus->dev = dev; bus->rman.rm_start = 0; bus->rman.rm_end = PCI_BUSMAX; bus->rman.rm_type = RMAN_ARRAY; snprintf(buf, sizeof(buf), "%s bus numbers", device_get_nameunit(dev)); bus->rman.rm_descr = strdup(buf, M_DEVBUF); error = rman_init(&bus->rman); if (error) panic("Failed to initialize %s bus number rman", device_get_nameunit(dev)); /* * Allocate a bus range. This will return an existing bus range * if one exists, or a new bus range if one does not. */ rid = 0; bus->res = bus_alloc_resource(dev, PCI_RES_BUS, &rid, 0ul, ~0ul, min_count, 0); if (bus->res == NULL) { /* * Fall back to just allocating a range of a single bus * number. */ bus->res = bus_alloc_resource(dev, PCI_RES_BUS, &rid, 0ul, ~0ul, 1, 0); } else if (rman_get_size(bus->res) < min_count) /* * Attempt to grow the existing range to satisfy the * minimum desired count. */ (void)bus_adjust_resource(dev, PCI_RES_BUS, bus->res, rman_get_start(bus->res), rman_get_start(bus->res) + min_count - 1); /* * Add the initial resource to the rman. */ if (bus->res != NULL) { error = rman_manage_region(&bus->rman, rman_get_start(bus->res), rman_get_end(bus->res)); if (error) panic("Failed to add resource to rman"); bus->sec = rman_get_start(bus->res); bus->sub = rman_get_end(bus->res); } } static struct resource * pcib_suballoc_bus(struct pcib_secbus *bus, device_t child, int *rid, u_long start, u_long end, u_long count, u_int flags) { struct resource *res; res = rman_reserve_resource(&bus->rman, start, end, count, flags, child); if (res == NULL) return (NULL); if (bootverbose) device_printf(bus->dev, "allocated bus range (%lu-%lu) for rid %d of %s\n", rman_get_start(res), rman_get_end(res), *rid, pcib_child_name(child)); rman_set_rid(res, *rid); return (res); } /* * Attempt to grow the secondary bus range. This is much simpler than * for I/O windows as the range can only be grown by increasing * subbus. */ static int pcib_grow_subbus(struct pcib_secbus *bus, u_long new_end) { u_long old_end; int error; old_end = rman_get_end(bus->res); KASSERT(new_end > old_end, ("attempt to shrink subbus")); error = bus_adjust_resource(bus->dev, PCI_RES_BUS, bus->res, rman_get_start(bus->res), new_end); if (error) return (error); if (bootverbose) device_printf(bus->dev, "grew bus range to %lu-%lu\n", rman_get_start(bus->res), rman_get_end(bus->res)); error = rman_manage_region(&bus->rman, old_end + 1, rman_get_end(bus->res)); if (error) panic("Failed to add resource to rman"); bus->sub = rman_get_end(bus->res); pci_write_config(bus->dev, bus->sub_reg, bus->sub, 1); return (0); } struct resource * pcib_alloc_subbus(struct pcib_secbus *bus, device_t child, int *rid, u_long start, u_long end, u_long count, u_int flags) { struct resource *res; u_long start_free, end_free, new_end; /* * First, see if the request can be satisified by the existing * bus range. */ res = pcib_suballoc_bus(bus, child, rid, start, end, count, flags); if (res != NULL) return (res); /* * Figure out a range to grow the bus range. First, find the * first bus number after the last allocated bus in the rman and * enforce that as a minimum starting point for the range. */ if (rman_last_free_region(&bus->rman, &start_free, &end_free) != 0 || end_free != bus->sub) start_free = bus->sub + 1; if (start_free < start) start_free = start; new_end = start_free + count - 1; /* * See if this new range would satisfy the request if it * succeeds. */ if (new_end > end) return (NULL); /* Finally, attempt to grow the existing resource. */ if (bootverbose) { device_printf(bus->dev, "attempting to grow bus range for %lu buses\n", count); printf("\tback candidate range: %lu-%lu\n", start_free, new_end); } if (pcib_grow_subbus(bus, new_end) == 0) return (pcib_suballoc_bus(bus, child, rid, start, end, count, flags)); return (NULL); } #endif #else /* * Is the prefetch window open (eg, can we allocate memory in it?) */ static int pcib_is_prefetch_open(struct pcib_softc *sc) { return (sc->pmembase > 0 && sc->pmembase < sc->pmemlimit); } /* * Is the nonprefetch window open (eg, can we allocate memory in it?) */ static int pcib_is_nonprefetch_open(struct pcib_softc *sc) { return (sc->membase > 0 && sc->membase < sc->memlimit); } /* * Is the io window open (eg, can we allocate ports in it?) */ static int pcib_is_io_open(struct pcib_softc *sc) { return (sc->iobase > 0 && sc->iobase < sc->iolimit); } /* * Get current I/O decode. */ static void pcib_get_io_decode(struct pcib_softc *sc) { device_t dev; uint32_t iolow; dev = sc->dev; iolow = pci_read_config(dev, PCIR_IOBASEL_1, 1); if ((iolow & PCIM_BRIO_MASK) == PCIM_BRIO_32) sc->iobase = PCI_PPBIOBASE( pci_read_config(dev, PCIR_IOBASEH_1, 2), iolow); else sc->iobase = PCI_PPBIOBASE(0, iolow); iolow = pci_read_config(dev, PCIR_IOLIMITL_1, 1); if ((iolow & PCIM_BRIO_MASK) == PCIM_BRIO_32) sc->iolimit = PCI_PPBIOLIMIT( pci_read_config(dev, PCIR_IOLIMITH_1, 2), iolow); else sc->iolimit = PCI_PPBIOLIMIT(0, iolow); } /* * Get current memory decode. */ static void pcib_get_mem_decode(struct pcib_softc *sc) { device_t dev; pci_addr_t pmemlow; dev = sc->dev; sc->membase = PCI_PPBMEMBASE(0, pci_read_config(dev, PCIR_MEMBASE_1, 2)); sc->memlimit = PCI_PPBMEMLIMIT(0, pci_read_config(dev, PCIR_MEMLIMIT_1, 2)); pmemlow = pci_read_config(dev, PCIR_PMBASEL_1, 2); if ((pmemlow & PCIM_BRPM_MASK) == PCIM_BRPM_64) sc->pmembase = PCI_PPBMEMBASE( pci_read_config(dev, PCIR_PMBASEH_1, 4), pmemlow); else sc->pmembase = PCI_PPBMEMBASE(0, pmemlow); pmemlow = pci_read_config(dev, PCIR_PMLIMITL_1, 2); if ((pmemlow & PCIM_BRPM_MASK) == PCIM_BRPM_64) sc->pmemlimit = PCI_PPBMEMLIMIT( pci_read_config(dev, PCIR_PMLIMITH_1, 4), pmemlow); else sc->pmemlimit = PCI_PPBMEMLIMIT(0, pmemlow); } /* * Restore previous I/O decode. */ static void pcib_set_io_decode(struct pcib_softc *sc) { device_t dev; uint32_t iohi; dev = sc->dev; iohi = sc->iobase >> 16; if (iohi > 0) pci_write_config(dev, PCIR_IOBASEH_1, iohi, 2); pci_write_config(dev, PCIR_IOBASEL_1, sc->iobase >> 8, 1); iohi = sc->iolimit >> 16; if (iohi > 0) pci_write_config(dev, PCIR_IOLIMITH_1, iohi, 2); pci_write_config(dev, PCIR_IOLIMITL_1, sc->iolimit >> 8, 1); } /* * Restore previous memory decode. */ static void pcib_set_mem_decode(struct pcib_softc *sc) { device_t dev; pci_addr_t pmemhi; dev = sc->dev; pci_write_config(dev, PCIR_MEMBASE_1, sc->membase >> 16, 2); pci_write_config(dev, PCIR_MEMLIMIT_1, sc->memlimit >> 16, 2); pmemhi = sc->pmembase >> 32; if (pmemhi > 0) pci_write_config(dev, PCIR_PMBASEH_1, pmemhi, 4); pci_write_config(dev, PCIR_PMBASEL_1, sc->pmembase >> 16, 2); pmemhi = sc->pmemlimit >> 32; if (pmemhi > 0) pci_write_config(dev, PCIR_PMLIMITH_1, pmemhi, 4); pci_write_config(dev, PCIR_PMLIMITL_1, sc->pmemlimit >> 16, 2); } #endif /* * Get current bridge configuration. */ static void pcib_cfg_save(struct pcib_softc *sc) { device_t dev; dev = sc->dev; sc->command = pci_read_config(dev, PCIR_COMMAND, 2); sc->pribus = pci_read_config(dev, PCIR_PRIBUS_1, 1); sc->bus.sec = pci_read_config(dev, PCIR_SECBUS_1, 1); sc->bus.sub = pci_read_config(dev, PCIR_SUBBUS_1, 1); sc->bridgectl = pci_read_config(dev, PCIR_BRIDGECTL_1, 2); sc->seclat = pci_read_config(dev, PCIR_SECLAT_1, 1); #ifndef NEW_PCIB if (sc->command & PCIM_CMD_PORTEN) pcib_get_io_decode(sc); if (sc->command & PCIM_CMD_MEMEN) pcib_get_mem_decode(sc); #endif } /* * Restore previous bridge configuration. */ static void pcib_cfg_restore(struct pcib_softc *sc) { device_t dev; dev = sc->dev; pci_write_config(dev, PCIR_COMMAND, sc->command, 2); pci_write_config(dev, PCIR_PRIBUS_1, sc->pribus, 1); pci_write_config(dev, PCIR_SECBUS_1, sc->bus.sec, 1); pci_write_config(dev, PCIR_SUBBUS_1, sc->bus.sub, 1); pci_write_config(dev, PCIR_BRIDGECTL_1, sc->bridgectl, 2); pci_write_config(dev, PCIR_SECLAT_1, sc->seclat, 1); #ifdef NEW_PCIB pcib_write_windows(sc, WIN_IO | WIN_MEM | WIN_PMEM); #else if (sc->command & PCIM_CMD_PORTEN) pcib_set_io_decode(sc); if (sc->command & PCIM_CMD_MEMEN) pcib_set_mem_decode(sc); #endif } /* * Generic device interface */ static int pcib_probe(device_t dev) { if ((pci_get_class(dev) == PCIC_BRIDGE) && (pci_get_subclass(dev) == PCIS_BRIDGE_PCI)) { device_set_desc(dev, "PCI-PCI bridge"); return(-10000); } return(ENXIO); } void pcib_attach_common(device_t dev) { struct pcib_softc *sc; struct sysctl_ctx_list *sctx; struct sysctl_oid *soid; int comma; sc = device_get_softc(dev); sc->dev = dev; /* * Get current bridge configuration. */ sc->domain = pci_get_domain(dev); sc->secstat = pci_read_config(dev, PCIR_SECSTAT_1, 2); pcib_cfg_save(sc); /* * The primary bus register should always be the bus of the * parent. */ sc->pribus = pci_get_bus(dev); pci_write_config(dev, PCIR_PRIBUS_1, sc->pribus, 1); /* * Setup sysctl reporting nodes */ sctx = device_get_sysctl_ctx(dev); soid = device_get_sysctl_tree(dev); SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "domain", CTLFLAG_RD, &sc->domain, 0, "Domain number"); SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "pribus", CTLFLAG_RD, &sc->pribus, 0, "Primary bus number"); SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "secbus", CTLFLAG_RD, &sc->bus.sec, 0, "Secondary bus number"); SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "subbus", CTLFLAG_RD, &sc->bus.sub, 0, "Subordinate bus number"); /* * Quirk handling. */ switch (pci_get_devid(dev)) { #if !defined(NEW_PCIB) && !defined(PCI_RES_BUS) case 0x12258086: /* Intel 82454KX/GX (Orion) */ { uint8_t supbus; supbus = pci_read_config(dev, 0x41, 1); if (supbus != 0xff) { sc->bus.sec = supbus + 1; sc->bus.sub = supbus + 1; } break; } #endif /* * The i82380FB mobile docking controller is a PCI-PCI bridge, * and it is a subtractive bridge. However, the ProgIf is wrong * so the normal setting of PCIB_SUBTRACTIVE bit doesn't * happen. There's also a Toshiba bridge that behaves this * way. */ case 0x124b8086: /* Intel 82380FB Mobile */ case 0x060513d7: /* Toshiba ???? */ sc->flags |= PCIB_SUBTRACTIVE; break; #if !defined(NEW_PCIB) && !defined(PCI_RES_BUS) /* Compaq R3000 BIOS sets wrong subordinate bus number. */ case 0x00dd10de: { char *cp; if ((cp = kern_getenv("smbios.planar.maker")) == NULL) break; if (strncmp(cp, "Compal", 6) != 0) { freeenv(cp); break; } freeenv(cp); if ((cp = kern_getenv("smbios.planar.product")) == NULL) break; if (strncmp(cp, "08A0", 4) != 0) { freeenv(cp); break; } freeenv(cp); if (sc->bus.sub < 0xa) { pci_write_config(dev, PCIR_SUBBUS_1, 0xa, 1); sc->bus.sub = pci_read_config(dev, PCIR_SUBBUS_1, 1); } break; } #endif } if (pci_msi_device_blacklisted(dev)) sc->flags |= PCIB_DISABLE_MSI; if (pci_msix_device_blacklisted(dev)) sc->flags |= PCIB_DISABLE_MSIX; /* * Intel 815, 845 and other chipsets say they are PCI-PCI bridges, * but have a ProgIF of 0x80. The 82801 family (AA, AB, BAM/CAM, * BA/CA/DB and E) PCI bridges are HUB-PCI bridges, in Intelese. * This means they act as if they were subtractively decoding * bridges and pass all transactions. Mark them and real ProgIf 1 * parts as subtractive. */ if ((pci_get_devid(dev) & 0xff00ffff) == 0x24008086 || pci_read_config(dev, PCIR_PROGIF, 1) == PCIP_BRIDGE_PCI_SUBTRACTIVE) sc->flags |= PCIB_SUBTRACTIVE; #ifdef NEW_PCIB #ifdef PCI_RES_BUS pcib_setup_secbus(dev, &sc->bus, 1); #endif pcib_probe_windows(sc); #endif if (bootverbose) { device_printf(dev, " domain %d\n", sc->domain); device_printf(dev, " secondary bus %d\n", sc->bus.sec); device_printf(dev, " subordinate bus %d\n", sc->bus.sub); #ifdef NEW_PCIB if (pcib_is_window_open(&sc->io)) device_printf(dev, " I/O decode 0x%jx-0x%jx\n", (uintmax_t)sc->io.base, (uintmax_t)sc->io.limit); if (pcib_is_window_open(&sc->mem)) device_printf(dev, " memory decode 0x%jx-0x%jx\n", (uintmax_t)sc->mem.base, (uintmax_t)sc->mem.limit); if (pcib_is_window_open(&sc->pmem)) device_printf(dev, " prefetched decode 0x%jx-0x%jx\n", (uintmax_t)sc->pmem.base, (uintmax_t)sc->pmem.limit); #else if (pcib_is_io_open(sc)) device_printf(dev, " I/O decode 0x%x-0x%x\n", sc->iobase, sc->iolimit); if (pcib_is_nonprefetch_open(sc)) device_printf(dev, " memory decode 0x%jx-0x%jx\n", (uintmax_t)sc->membase, (uintmax_t)sc->memlimit); if (pcib_is_prefetch_open(sc)) device_printf(dev, " prefetched decode 0x%jx-0x%jx\n", (uintmax_t)sc->pmembase, (uintmax_t)sc->pmemlimit); #endif if (sc->bridgectl & (PCIB_BCR_ISA_ENABLE | PCIB_BCR_VGA_ENABLE) || sc->flags & PCIB_SUBTRACTIVE) { device_printf(dev, " special decode "); comma = 0; if (sc->bridgectl & PCIB_BCR_ISA_ENABLE) { printf("ISA"); comma = 1; } if (sc->bridgectl & PCIB_BCR_VGA_ENABLE) { printf("%sVGA", comma ? ", " : ""); comma = 1; } if (sc->flags & PCIB_SUBTRACTIVE) printf("%ssubtractive", comma ? ", " : ""); printf("\n"); } } /* * Always enable busmastering on bridges so that transactions * initiated on the secondary bus are passed through to the * primary bus. */ pci_enable_busmaster(dev); } int pcib_attach(device_t dev) { struct pcib_softc *sc; device_t child; pcib_attach_common(dev); sc = device_get_softc(dev); if (sc->bus.sec != 0) { child = device_add_child(dev, "pci", sc->bus.sec); if (child != NULL) return(bus_generic_attach(dev)); } /* no secondary bus; we should have fixed this */ return(0); } int pcib_suspend(device_t dev) { device_t pcib; int dstate, error; pcib_cfg_save(device_get_softc(dev)); error = bus_generic_suspend(dev); if (error == 0 && pci_do_power_suspend) { dstate = PCI_POWERSTATE_D3; pcib = device_get_parent(device_get_parent(dev)); if (PCIB_POWER_FOR_SLEEP(pcib, dev, &dstate) == 0) pci_set_powerstate(dev, dstate); } return (error); } int pcib_resume(device_t dev) { device_t pcib; int dstate; if (pci_do_power_resume) { pcib = device_get_parent(device_get_parent(dev)); dstate = PCI_POWERSTATE_D0; if (PCIB_POWER_FOR_SLEEP(pcib, dev, &dstate) == 0) pci_set_powerstate(dev, dstate); } pcib_cfg_restore(device_get_softc(dev)); return (bus_generic_resume(dev)); } int pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result) { struct pcib_softc *sc = device_get_softc(dev); switch (which) { case PCIB_IVAR_DOMAIN: *result = sc->domain; return(0); case PCIB_IVAR_BUS: *result = sc->bus.sec; return(0); } return(ENOENT); } int pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value) { switch (which) { case PCIB_IVAR_DOMAIN: return(EINVAL); case PCIB_IVAR_BUS: return(EINVAL); } return(ENOENT); } #ifdef NEW_PCIB /* * Attempt to allocate a resource from the existing resources assigned * to a window. */ static struct resource * pcib_suballoc_resource(struct pcib_softc *sc, struct pcib_window *w, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags) { struct resource *res; if (!pcib_is_window_open(w)) return (NULL); res = rman_reserve_resource(&w->rman, start, end, count, flags & ~RF_ACTIVE, child); if (res == NULL) return (NULL); if (bootverbose) device_printf(sc->dev, "allocated %s range (%#lx-%#lx) for rid %x of %s\n", w->name, rman_get_start(res), rman_get_end(res), *rid, pcib_child_name(child)); rman_set_rid(res, *rid); /* * If the resource should be active, pass that request up the * tree. This assumes the parent drivers can handle * activating sub-allocated resources. */ if (flags & RF_ACTIVE) { if (bus_activate_resource(child, type, *rid, res) != 0) { rman_release_resource(res); return (NULL); } } return (res); } /* Allocate a fresh resource range for an unconfigured window. */ static int pcib_alloc_new_window(struct pcib_softc *sc, struct pcib_window *w, int type, u_long start, u_long end, u_long count, u_int flags) { struct resource *res; u_long base, limit, wmask; int rid; /* * If this is an I/O window on a bridge with ISA enable set * and the start address is below 64k, then try to allocate an * initial window of 0x1000 bytes long starting at address * 0xf000 and walking down. Note that if the original request * was larger than the non-aliased range size of 0x100 our * caller would have raised the start address up to 64k * already. */ if (type == SYS_RES_IOPORT && sc->bridgectl & PCIB_BCR_ISA_ENABLE && start < 65536) { for (base = 0xf000; (long)base >= 0; base -= 0x1000) { limit = base + 0xfff; /* * Skip ranges that wouldn't work for the * original request. Note that the actual * window that overlaps are the non-alias * ranges within [base, limit], so this isn't * quite a simple comparison. */ if (start + count > limit - 0x400) continue; if (base == 0) { /* * The first open region for the window at * 0 is 0x400-0x4ff. */ if (end - count + 1 < 0x400) continue; } else { if (end - count + 1 < base) continue; } if (pcib_alloc_nonisa_ranges(sc, base, limit) == 0) { w->base = base; w->limit = limit; return (0); } } return (ENOSPC); } wmask = (1ul << w->step) - 1; if (RF_ALIGNMENT(flags) < w->step) { flags &= ~RF_ALIGNMENT_MASK; flags |= RF_ALIGNMENT_LOG2(w->step); } start &= ~wmask; end |= wmask; count = roundup2(count, 1ul << w->step); rid = w->reg; res = bus_alloc_resource(sc->dev, type, &rid, start, end, count, flags & ~RF_ACTIVE); if (res == NULL) return (ENOSPC); pcib_add_window_resources(w, &res, 1); pcib_activate_window(sc, type); w->base = rman_get_start(res); w->limit = rman_get_end(res); return (0); } /* Try to expand an existing window to the requested base and limit. */ static int pcib_expand_window(struct pcib_softc *sc, struct pcib_window *w, int type, u_long base, u_long limit) { struct resource *res; int error, i, force_64k_base; KASSERT(base <= w->base && limit >= w->limit, ("attempting to shrink window")); /* * XXX: pcib_grow_window() doesn't try to do this anyway and * the error handling for all the edge cases would be tedious. */ KASSERT(limit == w->limit || base == w->base, ("attempting to grow both ends of a window")); /* * Yet more special handling for requests to expand an I/O * window behind an ISA-enabled bridge. Since I/O windows * have to grow in 0x1000 increments and the end of the 0xffff * range is an alias, growing a window below 64k will always * result in allocating new resources and never adjusting an * existing resource. */ if (type == SYS_RES_IOPORT && sc->bridgectl & PCIB_BCR_ISA_ENABLE && (limit <= 65535 || (base <= 65535 && base != w->base))) { KASSERT(limit == w->limit || limit <= 65535, ("attempting to grow both ends across 64k ISA alias")); if (base != w->base) error = pcib_alloc_nonisa_ranges(sc, base, w->base - 1); else error = pcib_alloc_nonisa_ranges(sc, w->limit + 1, limit); if (error == 0) { w->base = base; w->limit = limit; } return (error); } /* * Find the existing resource to adjust. Usually there is only one, * but for an ISA-enabled bridge we might be growing the I/O window * above 64k and need to find the existing resource that maps all * of the area above 64k. */ for (i = 0; i < w->count; i++) { if (rman_get_end(w->res[i]) == w->limit) break; } KASSERT(i != w->count, ("did not find existing resource")); res = w->res[i]; /* * Usually the resource we found should match the window's * existing range. The one exception is the ISA-enabled case * mentioned above in which case the resource should start at * 64k. */ if (type == SYS_RES_IOPORT && sc->bridgectl & PCIB_BCR_ISA_ENABLE && w->base <= 65535) { KASSERT(rman_get_start(res) == 65536, ("existing resource mismatch")); force_64k_base = 1; } else { KASSERT(w->base == rman_get_start(res), ("existing resource mismatch")); force_64k_base = 0; } error = bus_adjust_resource(sc->dev, type, res, force_64k_base ? rman_get_start(res) : base, limit); if (error) return (error); /* Add the newly allocated region to the resource manager. */ if (w->base != base) { error = rman_manage_region(&w->rman, base, w->base - 1); w->base = base; } else { error = rman_manage_region(&w->rman, w->limit + 1, limit); w->limit = limit; } if (error) { if (bootverbose) device_printf(sc->dev, "failed to expand %s resource manager\n", w->name); (void)bus_adjust_resource(sc->dev, type, res, force_64k_base ? rman_get_start(res) : w->base, w->limit); } return (error); } /* * Attempt to grow a window to make room for a given resource request. */ static int pcib_grow_window(struct pcib_softc *sc, struct pcib_window *w, int type, u_long start, u_long end, u_long count, u_int flags) { u_long align, start_free, end_free, front, back, wmask; int error; /* * Clamp the desired resource range to the maximum address * this window supports. Reject impossible requests. * * For I/O port requests behind a bridge with the ISA enable * bit set, force large allocations to start above 64k. */ if (!w->valid) return (EINVAL); if (sc->bridgectl & PCIB_BCR_ISA_ENABLE && count > 0x100 && start < 65536) start = 65536; if (end > w->rman.rm_end) end = w->rman.rm_end; if (start + count - 1 > end || start + count < start) return (EINVAL); wmask = (1ul << w->step) - 1; /* * If there is no resource at all, just try to allocate enough * aligned space for this resource. */ if (w->res == NULL) { error = pcib_alloc_new_window(sc, w, type, start, end, count, flags); if (error) { if (bootverbose) device_printf(sc->dev, "failed to allocate initial %s window (%#lx-%#lx,%#lx)\n", w->name, start, end, count); return (error); } if (bootverbose) device_printf(sc->dev, "allocated initial %s window of %#jx-%#jx\n", w->name, (uintmax_t)w->base, (uintmax_t)w->limit); goto updatewin; } /* * See if growing the window would help. Compute the minimum * amount of address space needed on both the front and back * ends of the existing window to satisfy the allocation. * * For each end, build a candidate region adjusting for the * required alignment, etc. If there is a free region at the * edge of the window, grow from the inner edge of the free * region. Otherwise grow from the window boundary. * * Growing an I/O window below 64k for a bridge with the ISA * enable bit doesn't require any special magic as the step * size of an I/O window (1k) always includes multiple * non-alias ranges when it is grown in either direction. * * XXX: Special case: if w->res is completely empty and the * request size is larger than w->res, we should find the * optimal aligned buffer containing w->res and allocate that. */ if (bootverbose) device_printf(sc->dev, "attempting to grow %s window for (%#lx-%#lx,%#lx)\n", w->name, start, end, count); align = 1ul << RF_ALIGNMENT(flags); if (start < w->base) { if (rman_first_free_region(&w->rman, &start_free, &end_free) != 0 || start_free != w->base) end_free = w->base; if (end_free > end) end_free = end + 1; /* Move end_free down until it is properly aligned. */ end_free &= ~(align - 1); end_free--; front = end_free - (count - 1); /* * The resource would now be allocated at (front, * end_free). Ensure that fits in the (start, end) * bounds. end_free is checked above. If 'front' is * ok, ensure it is properly aligned for this window. * Also check for underflow. */ if (front >= start && front <= end_free) { if (bootverbose) printf("\tfront candidate range: %#lx-%#lx\n", front, end_free); front &= ~wmask; front = w->base - front; } else front = 0; } else front = 0; if (end > w->limit) { if (rman_last_free_region(&w->rman, &start_free, &end_free) != 0 || end_free != w->limit) start_free = w->limit + 1; if (start_free < start) start_free = start; /* Move start_free up until it is properly aligned. */ start_free = roundup2(start_free, align); back = start_free + count - 1; /* * The resource would now be allocated at (start_free, * back). Ensure that fits in the (start, end) * bounds. start_free is checked above. If 'back' is * ok, ensure it is properly aligned for this window. * Also check for overflow. */ if (back <= end && start_free <= back) { if (bootverbose) printf("\tback candidate range: %#lx-%#lx\n", start_free, back); back |= wmask; back -= w->limit; } else back = 0; } else back = 0; /* * Try to allocate the smallest needed region first. * If that fails, fall back to the other region. */ error = ENOSPC; while (front != 0 || back != 0) { if (front != 0 && (front <= back || back == 0)) { error = pcib_expand_window(sc, w, type, w->base - front, w->limit); if (error == 0) break; front = 0; } else { error = pcib_expand_window(sc, w, type, w->base, w->limit + back); if (error == 0) break; back = 0; } } if (error) return (error); if (bootverbose) device_printf(sc->dev, "grew %s window to %#jx-%#jx\n", w->name, (uintmax_t)w->base, (uintmax_t)w->limit); updatewin: /* Write the new window. */ KASSERT((w->base & wmask) == 0, ("start address is not aligned")); KASSERT((w->limit & wmask) == wmask, ("end address is not aligned")); pcib_write_windows(sc, w->mask); return (0); } /* * We have to trap resource allocation requests and ensure that the bridge * is set up to, or capable of handling them. */ struct resource * pcib_alloc_resource(device_t dev, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags) { struct pcib_softc *sc; struct resource *r; sc = device_get_softc(dev); /* * VGA resources are decoded iff the VGA enable bit is set in * the bridge control register. VGA resources do not fall into * the resource windows and are passed up to the parent. */ if ((type == SYS_RES_IOPORT && pci_is_vga_ioport_range(start, end)) || (type == SYS_RES_MEMORY && pci_is_vga_memory_range(start, end))) { if (sc->bridgectl & PCIB_BCR_VGA_ENABLE) return (bus_generic_alloc_resource(dev, child, type, rid, start, end, count, flags)); else return (NULL); } switch (type) { #ifdef PCI_RES_BUS case PCI_RES_BUS: return (pcib_alloc_subbus(&sc->bus, child, rid, start, end, count, flags)); #endif case SYS_RES_IOPORT: if (pcib_is_isa_range(sc, start, end, count)) return (NULL); r = pcib_suballoc_resource(sc, &sc->io, child, type, rid, start, end, count, flags); if (r != NULL || (sc->flags & PCIB_SUBTRACTIVE) != 0) break; if (pcib_grow_window(sc, &sc->io, type, start, end, count, flags) == 0) r = pcib_suballoc_resource(sc, &sc->io, child, type, rid, start, end, count, flags); break; case SYS_RES_MEMORY: /* * For prefetchable resources, prefer the prefetchable * memory window, but fall back to the regular memory * window if that fails. Try both windows before * attempting to grow a window in case the firmware * has used a range in the regular memory window to * map a prefetchable BAR. */ if (flags & RF_PREFETCHABLE) { r = pcib_suballoc_resource(sc, &sc->pmem, child, type, rid, start, end, count, flags); if (r != NULL) break; } r = pcib_suballoc_resource(sc, &sc->mem, child, type, rid, start, end, count, flags); if (r != NULL || (sc->flags & PCIB_SUBTRACTIVE) != 0) break; if (flags & RF_PREFETCHABLE) { if (pcib_grow_window(sc, &sc->pmem, type, start, end, count, flags) == 0) { r = pcib_suballoc_resource(sc, &sc->pmem, child, type, rid, start, end, count, flags); if (r != NULL) break; } } if (pcib_grow_window(sc, &sc->mem, type, start, end, count, flags & ~RF_PREFETCHABLE) == 0) r = pcib_suballoc_resource(sc, &sc->mem, child, type, rid, start, end, count, flags); break; default: return (bus_generic_alloc_resource(dev, child, type, rid, start, end, count, flags)); } /* * If attempts to suballocate from the window fail but this is a * subtractive bridge, pass the request up the tree. */ if (sc->flags & PCIB_SUBTRACTIVE && r == NULL) return (bus_generic_alloc_resource(dev, child, type, rid, start, end, count, flags)); return (r); } int pcib_adjust_resource(device_t bus, device_t child, int type, struct resource *r, u_long start, u_long end) { struct pcib_softc *sc; sc = device_get_softc(bus); if (pcib_is_resource_managed(sc, type, r)) return (rman_adjust_resource(r, start, end)); return (bus_generic_adjust_resource(bus, child, type, r, start, end)); } int pcib_release_resource(device_t dev, device_t child, int type, int rid, struct resource *r) { struct pcib_softc *sc; int error; sc = device_get_softc(dev); if (pcib_is_resource_managed(sc, type, r)) { if (rman_get_flags(r) & RF_ACTIVE) { error = bus_deactivate_resource(child, type, rid, r); if (error) return (error); } return (rman_release_resource(r)); } return (bus_generic_release_resource(dev, child, type, rid, r)); } #else /* * We have to trap resource allocation requests and ensure that the bridge * is set up to, or capable of handling them. */ struct resource * pcib_alloc_resource(device_t dev, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags) { struct pcib_softc *sc = device_get_softc(dev); const char *name, *suffix; int ok; /* * Fail the allocation for this range if it's not supported. */ name = device_get_nameunit(child); if (name == NULL) { name = ""; suffix = ""; } else suffix = " "; switch (type) { case SYS_RES_IOPORT: ok = 0; if (!pcib_is_io_open(sc)) break; ok = (start >= sc->iobase && end <= sc->iolimit); /* * Make sure we allow access to VGA I/O addresses when the * bridge has the "VGA Enable" bit set. */ if (!ok && pci_is_vga_ioport_range(start, end)) ok = (sc->bridgectl & PCIB_BCR_VGA_ENABLE) ? 1 : 0; if ((sc->flags & PCIB_SUBTRACTIVE) == 0) { if (!ok) { if (start < sc->iobase) start = sc->iobase; if (end > sc->iolimit) end = sc->iolimit; if (start < end) ok = 1; } } else { ok = 1; #if 0 /* * If we overlap with the subtractive range, then * pick the upper range to use. */ if (start < sc->iolimit && end > sc->iobase) start = sc->iolimit + 1; #endif } if (end < start) { device_printf(dev, "ioport: end (%lx) < start (%lx)\n", end, start); start = 0; end = 0; ok = 0; } if (!ok) { device_printf(dev, "%s%srequested unsupported I/O " "range 0x%lx-0x%lx (decoding 0x%x-0x%x)\n", name, suffix, start, end, sc->iobase, sc->iolimit); return (NULL); } if (bootverbose) device_printf(dev, "%s%srequested I/O range 0x%lx-0x%lx: in range\n", name, suffix, start, end); break; case SYS_RES_MEMORY: ok = 0; if (pcib_is_nonprefetch_open(sc)) ok = ok || (start >= sc->membase && end <= sc->memlimit); if (pcib_is_prefetch_open(sc)) ok = ok || (start >= sc->pmembase && end <= sc->pmemlimit); /* * Make sure we allow access to VGA memory addresses when the * bridge has the "VGA Enable" bit set. */ if (!ok && pci_is_vga_memory_range(start, end)) ok = (sc->bridgectl & PCIB_BCR_VGA_ENABLE) ? 1 : 0; if ((sc->flags & PCIB_SUBTRACTIVE) == 0) { if (!ok) { ok = 1; if (flags & RF_PREFETCHABLE) { if (pcib_is_prefetch_open(sc)) { if (start < sc->pmembase) start = sc->pmembase; if (end > sc->pmemlimit) end = sc->pmemlimit; } else { ok = 0; } } else { /* non-prefetchable */ if (pcib_is_nonprefetch_open(sc)) { if (start < sc->membase) start = sc->membase; if (end > sc->memlimit) end = sc->memlimit; } else { ok = 0; } } } } else if (!ok) { ok = 1; /* subtractive bridge: always ok */ #if 0 if (pcib_is_nonprefetch_open(sc)) { if (start < sc->memlimit && end > sc->membase) start = sc->memlimit + 1; } if (pcib_is_prefetch_open(sc)) { if (start < sc->pmemlimit && end > sc->pmembase) start = sc->pmemlimit + 1; } #endif } if (end < start) { device_printf(dev, "memory: end (%lx) < start (%lx)\n", end, start); start = 0; end = 0; ok = 0; } if (!ok && bootverbose) device_printf(dev, "%s%srequested unsupported memory range %#lx-%#lx " "(decoding %#jx-%#jx, %#jx-%#jx)\n", name, suffix, start, end, (uintmax_t)sc->membase, (uintmax_t)sc->memlimit, (uintmax_t)sc->pmembase, (uintmax_t)sc->pmemlimit); if (!ok) return (NULL); if (bootverbose) device_printf(dev,"%s%srequested memory range " "0x%lx-0x%lx: good\n", name, suffix, start, end); break; default: break; } /* * Bridge is OK decoding this resource, so pass it up. */ return (bus_generic_alloc_resource(dev, child, type, rid, start, end, count, flags)); } #endif /* * If ARI is enabled on this downstream port, translate the function number * to the non-ARI slot/function. The downstream port will convert it back in * hardware. If ARI is not enabled slot and func are not modified. */ static __inline void pcib_xlate_ari(device_t pcib, int bus, int *slot, int *func) { struct pcib_softc *sc; int ari_func; sc = device_get_softc(pcib); ari_func = *func; if (sc->flags & PCIB_ENABLE_ARI) { KASSERT(*slot == 0, ("Non-zero slot number with ARI enabled!")); *slot = PCIE_ARI_SLOT(ari_func); *func = PCIE_ARI_FUNC(ari_func); } } static void pcib_enable_ari(struct pcib_softc *sc, uint32_t pcie_pos) { uint32_t ctl2; ctl2 = pci_read_config(sc->dev, pcie_pos + PCIER_DEVICE_CTL2, 4); ctl2 |= PCIEM_CTL2_ARI; pci_write_config(sc->dev, pcie_pos + PCIER_DEVICE_CTL2, ctl2, 4); sc->flags |= PCIB_ENABLE_ARI; } /* * PCIB interface. */ int pcib_maxslots(device_t dev) { return (PCI_SLOTMAX); } static int pcib_ari_maxslots(device_t dev) { struct pcib_softc *sc; sc = device_get_softc(dev); if (sc->flags & PCIB_ENABLE_ARI) return (PCIE_ARI_SLOTMAX); else return (PCI_SLOTMAX); } static int pcib_ari_maxfuncs(device_t dev) { struct pcib_softc *sc; sc = device_get_softc(dev); if (sc->flags & PCIB_ENABLE_ARI) return (PCIE_ARI_FUNCMAX); else return (PCI_FUNCMAX); } +static void +pcib_ari_decode_rid(device_t pcib, uint16_t rid, int *bus, int *slot, + int *func) +{ + struct pcib_softc *sc; + + sc = device_get_softc(pcib); + + *bus = PCI_RID2BUS(rid); + if (sc->flags & PCIB_ENABLE_ARI) { + *slot = PCIE_ARI_RID2SLOT(rid); + *func = PCIE_ARI_RID2FUNC(rid); + } else { + *slot = PCI_RID2SLOT(rid); + *func = PCI_RID2FUNC(rid); + } +} + /* * Since we are a child of a PCI bus, its parent must support the pcib interface. */ static uint32_t pcib_read_config(device_t dev, u_int b, u_int s, u_int f, u_int reg, int width) { pcib_xlate_ari(dev, b, &s, &f); return(PCIB_READ_CONFIG(device_get_parent(device_get_parent(dev)), b, s, f, reg, width)); } static void pcib_write_config(device_t dev, u_int b, u_int s, u_int f, u_int reg, uint32_t val, int width) { pcib_xlate_ari(dev, b, &s, &f); PCIB_WRITE_CONFIG(device_get_parent(device_get_parent(dev)), b, s, f, reg, val, width); } /* * Route an interrupt across a PCI bridge. */ int pcib_route_interrupt(device_t pcib, device_t dev, int pin) { device_t bus; int parent_intpin; int intnum; /* * * The PCI standard defines a swizzle of the child-side device/intpin to * the parent-side intpin as follows. * * device = device on child bus * child_intpin = intpin on child bus slot (0-3) * parent_intpin = intpin on parent bus slot (0-3) * * parent_intpin = (device + child_intpin) % 4 */ parent_intpin = (pci_get_slot(dev) + (pin - 1)) % 4; /* * Our parent is a PCI bus. Its parent must export the pcib interface * which includes the ability to route interrupts. */ bus = device_get_parent(pcib); intnum = PCIB_ROUTE_INTERRUPT(device_get_parent(bus), pcib, parent_intpin + 1); if (PCI_INTERRUPT_VALID(intnum) && bootverbose) { device_printf(pcib, "slot %d INT%c is routed to irq %d\n", pci_get_slot(dev), 'A' + pin - 1, intnum); } return(intnum); } /* Pass request to alloc MSI/MSI-X messages up to the parent bridge. */ int pcib_alloc_msi(device_t pcib, device_t dev, int count, int maxcount, int *irqs) { struct pcib_softc *sc = device_get_softc(pcib); device_t bus; if (sc->flags & PCIB_DISABLE_MSI) return (ENXIO); bus = device_get_parent(pcib); return (PCIB_ALLOC_MSI(device_get_parent(bus), dev, count, maxcount, irqs)); } /* Pass request to release MSI/MSI-X messages up to the parent bridge. */ int pcib_release_msi(device_t pcib, device_t dev, int count, int *irqs) { device_t bus; bus = device_get_parent(pcib); return (PCIB_RELEASE_MSI(device_get_parent(bus), dev, count, irqs)); } /* Pass request to alloc an MSI-X message up to the parent bridge. */ int pcib_alloc_msix(device_t pcib, device_t dev, int *irq) { struct pcib_softc *sc = device_get_softc(pcib); device_t bus; if (sc->flags & PCIB_DISABLE_MSIX) return (ENXIO); bus = device_get_parent(pcib); return (PCIB_ALLOC_MSIX(device_get_parent(bus), dev, irq)); } /* Pass request to release an MSI-X message up to the parent bridge. */ int pcib_release_msix(device_t pcib, device_t dev, int irq) { device_t bus; bus = device_get_parent(pcib); return (PCIB_RELEASE_MSIX(device_get_parent(bus), dev, irq)); } /* Pass request to map MSI/MSI-X message up to parent bridge. */ int pcib_map_msi(device_t pcib, device_t dev, int irq, uint64_t *addr, uint32_t *data) { device_t bus; int error; bus = device_get_parent(pcib); error = PCIB_MAP_MSI(device_get_parent(bus), dev, irq, addr, data); if (error) return (error); pci_ht_map_msi(pcib, *addr); return (0); } /* Pass request for device power state up to parent bridge. */ int pcib_power_for_sleep(device_t pcib, device_t dev, int *pstate) { device_t bus; bus = device_get_parent(pcib); return (PCIB_POWER_FOR_SLEEP(bus, dev, pstate)); +} + +static int +pcib_ari_enabled(device_t pcib) +{ + struct pcib_softc *sc; + + sc = device_get_softc(pcib); + + return ((sc->flags & PCIB_ENABLE_ARI) != 0); } static uint16_t pcib_ari_get_rid(device_t pcib, device_t dev) { struct pcib_softc *sc; uint8_t bus, slot, func; sc = device_get_softc(pcib); if (sc->flags & PCIB_ENABLE_ARI) { bus = pci_get_bus(dev); func = pci_get_function(dev); return (PCI_ARI_RID(bus, func)); } else { bus = pci_get_bus(dev); slot = pci_get_slot(dev); func = pci_get_function(dev); return (PCI_RID(bus, slot, func)); } } /* * Check that the downstream port (pcib) and the endpoint device (dev) both * support ARI. If so, enable it and return 0, otherwise return an error. */ static int pcib_try_enable_ari(device_t pcib, device_t dev) { struct pcib_softc *sc; int error; uint32_t cap2; int ari_cap_off; uint32_t ari_ver; uint32_t pcie_pos; sc = device_get_softc(pcib); /* * ARI is controlled in a register in the PCIe capability structure. * If the downstream port does not have the PCIe capability structure * then it does not support ARI. */ error = pci_find_cap(pcib, PCIY_EXPRESS, &pcie_pos); if (error != 0) return (ENODEV); /* Check that the PCIe port advertises ARI support. */ cap2 = pci_read_config(pcib, pcie_pos + PCIER_DEVICE_CAP2, 4); if (!(cap2 & PCIEM_CAP2_ARI)) return (ENODEV); /* * Check that the endpoint device advertises ARI support via the ARI * extended capability structure. */ error = pci_find_extcap(dev, PCIZ_ARI, &ari_cap_off); if (error != 0) return (ENODEV); /* * Finally, check that the endpoint device supports the same version * of ARI that we do. */ ari_ver = pci_read_config(dev, ari_cap_off, 4); if (PCI_EXTCAP_VER(ari_ver) != PCIB_SUPPORTED_ARI_VER) { if (bootverbose) device_printf(pcib, "Unsupported version of ARI (%d) detected\n", PCI_EXTCAP_VER(ari_ver)); return (ENXIO); } pcib_enable_ari(sc, pcie_pos); return (0); } Index: head/sys/dev/pci/pcib_if.m =================================================================== --- head/sys/dev/pci/pcib_if.m (revision 279442) +++ head/sys/dev/pci/pcib_if.m (revision 279443) @@ -1,184 +1,209 @@ #- # Copyright (c) 2000 Doug Rabson # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # $FreeBSD$ # #include #include #include #include INTERFACE pcib; CODE { static int null_route_interrupt(device_t pcib, device_t dev, int pin) { return (PCI_INVALID_IRQ); } + + static int + pcib_null_ari_enabled(device_t pcib) + { + + return (0); + } }; # # Return the number of slots on the attached PCI bus. # METHOD int maxslots { device_t dev; }; # # # Return the number of functions on the attached PCI bus. # METHOD int maxfuncs { device_t dev; } DEFAULT pcib_maxfuncs; # # Read configuration space on the PCI bus. The bus, slot and func # arguments determine the device which is being read and the reg # argument is a byte offset into configuration space for that # device. The width argument (which should be 1, 2 or 4) specifies how # many byte of configuration space to read from that offset. # METHOD u_int32_t read_config { device_t dev; u_int bus; u_int slot; u_int func; u_int reg; int width; }; # # Write configuration space on the PCI bus. The bus, slot and func # arguments determine the device which is being written and the reg # argument is a byte offset into configuration space for that # device. The value field is written to the configuration space, with # the number of bytes written depending on the width argument. # METHOD void write_config { device_t dev; u_int bus; u_int slot; u_int func; u_int reg; u_int32_t value; int width; }; # # Route an interrupt. Returns a value suitable for stuffing into # a device's interrupt register. # METHOD int route_interrupt { device_t pcib; device_t dev; int pin; } DEFAULT null_route_interrupt; # # Allocate 'count' MSI messsages mapped onto 'count' IRQs. 'irq' points # to an array of at least 'count' ints. The max number of messages this # device supports is included so that the MD code can take that into # account when assigning resources so that the proper number of low bits # are clear in the resulting message data value. # METHOD int alloc_msi { device_t pcib; device_t dev; int count; int maxcount; int *irqs; }; # # Release 'count' MSI messages mapped onto 'count' IRQs stored in the # array pointed to by 'irqs'. # METHOD int release_msi { device_t pcib; device_t dev; int count; int *irqs; }; # # Allocate a single MSI-X message mapped onto '*irq'. # METHOD int alloc_msix { device_t pcib; device_t dev; int *irq; }; # # Release a single MSI-X message mapped onto 'irq'. # METHOD int release_msix { device_t pcib; device_t dev; int irq; }; # # Determine the MSI/MSI-X message address and data for 'irq'. The address # is returned in '*addr', and the data in '*data'. # METHOD int map_msi { device_t pcib; device_t dev; int irq; uint64_t *addr; uint32_t *data; }; # # Return the device power state to be used during a system sleep state # transition such as suspend and resume. # METHOD int power_for_sleep { device_t pcib; device_t dev; int *pstate; }; # # Return the PCI Routing Identifier (RID) for the device. # METHOD uint16_t get_rid { device_t pcib; device_t dev; } DEFAULT pcib_get_rid; # # Enable Alternative RID Interpretation if both the downstream port (pcib) # and the endpoint device (dev) both support it. # METHOD int try_enable_ari { device_t pcib; device_t dev; }; + +# +# Return non-zero if PCI ARI is enabled, or zero otherwise +# +METHOD int ari_enabled { + device_t pcib; +} DEFAULT pcib_null_ari_enabled; + +# +# Decode a PCI Routing Identifier (RID) into PCI bus/slot/function +# +METHOD void decode_rid { + device_t pcib; + uint16_t rid; + int *bus; + int *slot; + int *func; +} DEFAULT pcib_decode_rid; Index: head/sys/dev/pci/pcib_private.h =================================================================== --- head/sys/dev/pci/pcib_private.h (revision 279442) +++ head/sys/dev/pci/pcib_private.h (revision 279443) @@ -1,174 +1,176 @@ /*- * Copyright (c) 1994,1995 Stefan Esser, Wolfgang StanglMeier * Copyright (c) 2000 Michael Smith * Copyright (c) 2000 BSDi * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef __PCIB_PRIVATE_H__ #define __PCIB_PRIVATE_H__ #ifdef NEW_PCIB /* * Data structure and routines that Host to PCI bridge drivers can use * to restrict allocations for child devices to ranges decoded by the * bridge. */ struct pcib_host_resources { device_t hr_pcib; struct resource_list hr_rl; }; int pcib_host_res_init(device_t pcib, struct pcib_host_resources *hr); int pcib_host_res_free(device_t pcib, struct pcib_host_resources *hr); int pcib_host_res_decodes(struct pcib_host_resources *hr, int type, u_long start, u_long end, u_int flags); struct resource *pcib_host_res_alloc(struct pcib_host_resources *hr, device_t dev, int type, int *rid, u_long start, u_long end, u_long count, u_int flags); int pcib_host_res_adjust(struct pcib_host_resources *hr, device_t dev, int type, struct resource *r, u_long start, u_long end); #endif /* * Export portions of generic PCI:PCI bridge support so that it can be * used by subclasses. */ DECLARE_CLASS(pcib_driver); #ifdef NEW_PCIB #define WIN_IO 0x1 #define WIN_MEM 0x2 #define WIN_PMEM 0x4 struct pcib_window { pci_addr_t base; /* base address */ pci_addr_t limit; /* topmost address */ struct rman rman; struct resource **res; int count; /* size of 'res' array */ int reg; /* resource id from parent */ int valid; int mask; /* WIN_* bitmask of this window */ int step; /* log_2 of window granularity */ const char *name; }; #endif struct pcib_secbus { u_int sec; u_int sub; #if defined(NEW_PCIB) && defined(PCI_RES_BUS) device_t dev; struct rman rman; struct resource *res; const char *name; int sub_reg; #endif }; /* * Bridge-specific data. */ struct pcib_softc { device_t dev; uint32_t flags; /* flags */ #define PCIB_SUBTRACTIVE 0x1 #define PCIB_DISABLE_MSI 0x2 #define PCIB_DISABLE_MSIX 0x4 #define PCIB_ENABLE_ARI 0x8 uint16_t command; /* command register */ u_int domain; /* domain number */ u_int pribus; /* primary bus number */ struct pcib_secbus bus; /* secondary bus numbers */ #ifdef NEW_PCIB struct pcib_window io; /* I/O port window */ struct pcib_window mem; /* memory window */ struct pcib_window pmem; /* prefetchable memory window */ #else pci_addr_t pmembase; /* base address of prefetchable memory */ pci_addr_t pmemlimit; /* topmost address of prefetchable memory */ pci_addr_t membase; /* base address of memory window */ pci_addr_t memlimit; /* topmost address of memory window */ uint32_t iobase; /* base address of port window */ uint32_t iolimit; /* topmost address of port window */ #endif uint16_t secstat; /* secondary bus status register */ uint16_t bridgectl; /* bridge control register */ uint8_t seclat; /* secondary bus latency timer */ }; #define PCIB_SUPPORTED_ARI_VER 1 typedef uint32_t pci_read_config_fn(int b, int s, int f, int reg, int width); int host_pcib_get_busno(pci_read_config_fn read_config, int bus, int slot, int func, uint8_t *busnum); #if defined(NEW_PCIB) && defined(PCI_RES_BUS) struct resource *pci_domain_alloc_bus(int domain, device_t dev, int *rid, u_long start, u_long end, u_long count, u_int flags); int pci_domain_adjust_bus(int domain, device_t dev, struct resource *r, u_long start, u_long end); int pci_domain_release_bus(int domain, device_t dev, int rid, struct resource *r); struct resource *pcib_alloc_subbus(struct pcib_secbus *bus, device_t child, int *rid, u_long start, u_long end, u_long count, u_int flags); void pcib_setup_secbus(device_t dev, struct pcib_secbus *bus, int min_count); #endif int pcib_attach(device_t dev); void pcib_attach_common(device_t dev); #ifdef NEW_PCIB const char *pcib_child_name(device_t child); #endif int pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result); int pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value); struct resource *pcib_alloc_resource(device_t dev, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags); #ifdef NEW_PCIB int pcib_adjust_resource(device_t bus, device_t child, int type, struct resource *r, u_long start, u_long end); int pcib_release_resource(device_t dev, device_t child, int type, int rid, struct resource *r); #endif int pcib_maxslots(device_t dev); int pcib_maxfuncs(device_t dev); int pcib_route_interrupt(device_t pcib, device_t dev, int pin); int pcib_alloc_msi(device_t pcib, device_t dev, int count, int maxcount, int *irqs); int pcib_release_msi(device_t pcib, device_t dev, int count, int *irqs); int pcib_alloc_msix(device_t pcib, device_t dev, int *irq); int pcib_release_msix(device_t pcib, device_t dev, int irq); int pcib_map_msi(device_t pcib, device_t dev, int irq, uint64_t *addr, uint32_t *data); uint16_t pcib_get_rid(device_t pcib, device_t dev); +void pcib_decode_rid(device_t pcib, uint16_t rid, int *bus, + int *slot, int *func); #endif Index: head/sys/dev/pci/pcib_support.c =================================================================== --- head/sys/dev/pci/pcib_support.c (revision 279442) +++ head/sys/dev/pci/pcib_support.c (revision 279443) @@ -1,68 +1,78 @@ /* * Copyright (c) 2014 Sandvine Inc. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * Support functions for the PCI:PCI bridge driver. This has to be in a * separate file because kernel configurations end up referencing the functions * here even when pci support is compiled out of the kernel. */ #include #include #include #include #include #include #include #include #include #include #include #include "pcib_if.h" int pcib_maxfuncs(device_t dev) { return (PCI_FUNCMAX); } uint16_t pcib_get_rid(device_t pcib, device_t dev) { uint8_t bus, slot, func; bus = pci_get_bus(dev); slot = pci_get_slot(dev); func = pci_get_function(dev); return (PCI_RID(bus, slot, func)); } +void +pcib_decode_rid(device_t pcib, uint16_t rid, int *bus, int *slot, + int *func) +{ + + *bus = PCI_RID2BUS(rid); + *slot = PCI_RID2SLOT(rid); + *func = PCI_RID2FUNC(rid); +} + Index: head/sys/dev/pci/pcireg.h =================================================================== --- head/sys/dev/pci/pcireg.h (revision 279442) +++ head/sys/dev/pci/pcireg.h (revision 279443) @@ -1,922 +1,926 @@ /*- * Copyright (c) 1997, Stefan Esser * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ * */ /* * PCIM_xxx: mask to locate subfield in register * PCIR_xxx: config register offset * PCIC_xxx: device class * PCIS_xxx: device subclass * PCIP_xxx: device programming interface * PCIV_xxx: PCI vendor ID (only required to fixup ancient devices) * PCID_xxx: device ID * PCIY_xxx: capability identification number * PCIZ_xxx: extended capability identification number */ /* some PCI bus constants */ #define PCI_DOMAINMAX 65535 /* highest supported domain number */ #define PCI_BUSMAX 255 /* highest supported bus number */ #define PCI_SLOTMAX 31 /* highest supported slot number */ #define PCI_FUNCMAX 7 /* highest supported function number */ #define PCI_REGMAX 255 /* highest supported config register addr. */ #define PCIE_REGMAX 4095 /* highest supported config register addr. */ #define PCI_MAXHDRTYPE 2 #define PCIE_ARI_SLOTMAX 0 #define PCIE_ARI_FUNCMAX 255 #define PCI_RID_BUS_SHIFT 8 #define PCI_RID_SLOT_SHIFT 3 #define PCI_RID_FUNC_SHIFT 0 #define PCI_RID(bus, slot, func) \ ((((bus) & PCI_BUSMAX) << PCI_RID_BUS_SHIFT) | \ (((slot) & PCI_SLOTMAX) << PCI_RID_SLOT_SHIFT) | \ (((func) & PCI_FUNCMAX) << PCI_RID_FUNC_SHIFT)) #define PCI_ARI_RID(bus, func) \ ((((bus) & PCI_BUSMAX) << PCI_RID_BUS_SHIFT) | \ (((func) & PCIE_ARI_FUNCMAX) << PCI_RID_FUNC_SHIFT)) #define PCI_RID2BUS(rid) (((rid) >> PCI_RID_BUS_SHIFT) & PCI_BUSMAX) #define PCI_RID2SLOT(rid) (((rid) >> PCI_RID_SLOT_SHIFT) & PCI_SLOTMAX) #define PCI_RID2FUNC(rid) (((rid) >> PCI_RID_FUNC_SHIFT) & PCI_FUNCMAX) +#define PCIE_ARI_RID2SLOT(rid) (0) +#define PCIE_ARI_RID2FUNC(rid) \ + (((rid) >> PCI_RID_FUNC_SHIFT) & PCIE_ARI_FUNCMAX) + #define PCIE_ARI_SLOT(func) (((func) >> PCI_RID_SLOT_SHIFT) & PCI_SLOTMAX) #define PCIE_ARI_FUNC(func) (((func) >> PCI_RID_FUNC_SHIFT) & PCI_FUNCMAX) /* PCI config header registers for all devices */ #define PCIR_DEVVENDOR 0x00 #define PCIR_VENDOR 0x00 #define PCIR_DEVICE 0x02 #define PCIR_COMMAND 0x04 #define PCIM_CMD_PORTEN 0x0001 #define PCIM_CMD_MEMEN 0x0002 #define PCIM_CMD_BUSMASTEREN 0x0004 #define PCIM_CMD_SPECIALEN 0x0008 #define PCIM_CMD_MWRICEN 0x0010 #define PCIM_CMD_PERRESPEN 0x0040 #define PCIM_CMD_SERRESPEN 0x0100 #define PCIM_CMD_BACKTOBACK 0x0200 #define PCIM_CMD_INTxDIS 0x0400 #define PCIR_STATUS 0x06 #define PCIM_STATUS_INTxSTATE 0x0008 #define PCIM_STATUS_CAPPRESENT 0x0010 #define PCIM_STATUS_66CAPABLE 0x0020 #define PCIM_STATUS_BACKTOBACK 0x0080 #define PCIM_STATUS_MDPERR 0x0100 #define PCIM_STATUS_SEL_FAST 0x0000 #define PCIM_STATUS_SEL_MEDIMUM 0x0200 #define PCIM_STATUS_SEL_SLOW 0x0400 #define PCIM_STATUS_SEL_MASK 0x0600 #define PCIM_STATUS_STABORT 0x0800 #define PCIM_STATUS_RTABORT 0x1000 #define PCIM_STATUS_RMABORT 0x2000 #define PCIM_STATUS_SERR 0x4000 #define PCIM_STATUS_PERR 0x8000 #define PCIR_REVID 0x08 #define PCIR_PROGIF 0x09 #define PCIR_SUBCLASS 0x0a #define PCIR_CLASS 0x0b #define PCIR_CACHELNSZ 0x0c #define PCIR_LATTIMER 0x0d #define PCIR_HDRTYPE 0x0e #define PCIM_HDRTYPE 0x7f #define PCIM_HDRTYPE_NORMAL 0x00 #define PCIM_HDRTYPE_BRIDGE 0x01 #define PCIM_HDRTYPE_CARDBUS 0x02 #define PCIM_MFDEV 0x80 #define PCIR_BIST 0x0f /* Capability Register Offsets */ #define PCICAP_ID 0x0 #define PCICAP_NEXTPTR 0x1 /* Capability Identification Numbers */ #define PCIY_PMG 0x01 /* PCI Power Management */ #define PCIY_AGP 0x02 /* AGP */ #define PCIY_VPD 0x03 /* Vital Product Data */ #define PCIY_SLOTID 0x04 /* Slot Identification */ #define PCIY_MSI 0x05 /* Message Signaled Interrupts */ #define PCIY_CHSWP 0x06 /* CompactPCI Hot Swap */ #define PCIY_PCIX 0x07 /* PCI-X */ #define PCIY_HT 0x08 /* HyperTransport */ #define PCIY_VENDOR 0x09 /* Vendor Unique */ #define PCIY_DEBUG 0x0a /* Debug port */ #define PCIY_CRES 0x0b /* CompactPCI central resource control */ #define PCIY_HOTPLUG 0x0c /* PCI Hot-Plug */ #define PCIY_SUBVENDOR 0x0d /* PCI-PCI bridge subvendor ID */ #define PCIY_AGP8X 0x0e /* AGP 8x */ #define PCIY_SECDEV 0x0f /* Secure Device */ #define PCIY_EXPRESS 0x10 /* PCI Express */ #define PCIY_MSIX 0x11 /* MSI-X */ #define PCIY_SATA 0x12 /* SATA */ #define PCIY_PCIAF 0x13 /* PCI Advanced Features */ /* Extended Capability Register Fields */ #define PCIR_EXTCAP 0x100 #define PCIM_EXTCAP_ID 0x0000ffff #define PCIM_EXTCAP_VER 0x000f0000 #define PCIM_EXTCAP_NEXTPTR 0xfff00000 #define PCI_EXTCAP_ID(ecap) ((ecap) & PCIM_EXTCAP_ID) #define PCI_EXTCAP_VER(ecap) (((ecap) & PCIM_EXTCAP_VER) >> 16) #define PCI_EXTCAP_NEXTPTR(ecap) (((ecap) & PCIM_EXTCAP_NEXTPTR) >> 20) /* Extended Capability Identification Numbers */ #define PCIZ_AER 0x0001 /* Advanced Error Reporting */ #define PCIZ_VC 0x0002 /* Virtual Channel if MFVC Ext Cap not set */ #define PCIZ_SERNUM 0x0003 /* Device Serial Number */ #define PCIZ_PWRBDGT 0x0004 /* Power Budgeting */ #define PCIZ_RCLINK_DCL 0x0005 /* Root Complex Link Declaration */ #define PCIZ_RCLINK_CTL 0x0006 /* Root Complex Internal Link Control */ #define PCIZ_RCEC_ASSOC 0x0007 /* Root Complex Event Collector Association */ #define PCIZ_MFVC 0x0008 /* Multi-Function Virtual Channel */ #define PCIZ_VC2 0x0009 /* Virtual Channel if MFVC Ext Cap set */ #define PCIZ_RCRB 0x000a /* RCRB Header */ #define PCIZ_VENDOR 0x000b /* Vendor Unique */ #define PCIZ_CAC 0x000c /* Configuration Access Correction -- obsolete */ #define PCIZ_ACS 0x000d /* Access Control Services */ #define PCIZ_ARI 0x000e /* Alternative Routing-ID Interpretation */ #define PCIZ_ATS 0x000f /* Address Translation Services */ #define PCIZ_SRIOV 0x0010 /* Single Root IO Virtualization */ #define PCIZ_MRIOV 0x0011 /* Multiple Root IO Virtualization */ #define PCIZ_MULTICAST 0x0012 /* Multicast */ #define PCIZ_PAGE_REQ 0x0013 /* Page Request */ #define PCIZ_AMD 0x0014 /* Reserved for AMD */ #define PCIZ_RESIZE_BAR 0x0015 /* Resizable BAR */ #define PCIZ_DPA 0x0016 /* Dynamic Power Allocation */ #define PCIZ_TPH_REQ 0x0017 /* TPH Requester */ #define PCIZ_LTR 0x0018 /* Latency Tolerance Reporting */ #define PCIZ_SEC_PCIE 0x0019 /* Secondary PCI Express */ #define PCIZ_PMUX 0x001a /* Protocol Multiplexing */ #define PCIZ_PASID 0x001b /* Process Address Space ID */ #define PCIZ_LN_REQ 0x001c /* LN Requester */ #define PCIZ_DPC 0x001d /* Downstream Porto Containment */ #define PCIZ_L1PM 0x001e /* L1 PM Substates */ /* config registers for header type 0 devices */ #define PCIR_BARS 0x10 #define PCIR_BAR(x) (PCIR_BARS + (x) * 4) #define PCIR_MAX_BAR_0 5 #define PCI_RID2BAR(rid) (((rid) - PCIR_BARS) / 4) #define PCI_BAR_IO(x) (((x) & PCIM_BAR_SPACE) == PCIM_BAR_IO_SPACE) #define PCI_BAR_MEM(x) (((x) & PCIM_BAR_SPACE) == PCIM_BAR_MEM_SPACE) #define PCIM_BAR_SPACE 0x00000001 #define PCIM_BAR_MEM_SPACE 0 #define PCIM_BAR_IO_SPACE 1 #define PCIM_BAR_MEM_TYPE 0x00000006 #define PCIM_BAR_MEM_32 0 #define PCIM_BAR_MEM_1MB 2 /* Locate below 1MB in PCI <= 2.1 */ #define PCIM_BAR_MEM_64 4 #define PCIM_BAR_MEM_PREFETCH 0x00000008 #define PCIM_BAR_MEM_BASE 0xfffffffffffffff0ULL #define PCIM_BAR_IO_RESERVED 0x00000002 #define PCIM_BAR_IO_BASE 0xfffffffc #define PCIR_CIS 0x28 #define PCIM_CIS_ASI_MASK 0x00000007 #define PCIM_CIS_ASI_CONFIG 0 #define PCIM_CIS_ASI_BAR0 1 #define PCIM_CIS_ASI_BAR1 2 #define PCIM_CIS_ASI_BAR2 3 #define PCIM_CIS_ASI_BAR3 4 #define PCIM_CIS_ASI_BAR4 5 #define PCIM_CIS_ASI_BAR5 6 #define PCIM_CIS_ASI_ROM 7 #define PCIM_CIS_ADDR_MASK 0x0ffffff8 #define PCIM_CIS_ROM_MASK 0xf0000000 #define PCIM_CIS_CONFIG_MASK 0xff #define PCIR_SUBVEND_0 0x2c #define PCIR_SUBDEV_0 0x2e #define PCIR_BIOS 0x30 #define PCIM_BIOS_ENABLE 0x01 #define PCIM_BIOS_ADDR_MASK 0xfffff800 #define PCIR_CAP_PTR 0x34 #define PCIR_INTLINE 0x3c #define PCIR_INTPIN 0x3d #define PCIR_MINGNT 0x3e #define PCIR_MAXLAT 0x3f /* config registers for header type 1 (PCI-to-PCI bridge) devices */ #define PCIR_MAX_BAR_1 1 #define PCIR_SECSTAT_1 0x1e #define PCIR_PRIBUS_1 0x18 #define PCIR_SECBUS_1 0x19 #define PCIR_SUBBUS_1 0x1a #define PCIR_SECLAT_1 0x1b #define PCIR_IOBASEL_1 0x1c #define PCIR_IOLIMITL_1 0x1d #define PCIR_IOBASEH_1 0x30 #define PCIR_IOLIMITH_1 0x32 #define PCIM_BRIO_16 0x0 #define PCIM_BRIO_32 0x1 #define PCIM_BRIO_MASK 0xf #define PCIR_MEMBASE_1 0x20 #define PCIR_MEMLIMIT_1 0x22 #define PCIR_PMBASEL_1 0x24 #define PCIR_PMLIMITL_1 0x26 #define PCIR_PMBASEH_1 0x28 #define PCIR_PMLIMITH_1 0x2c #define PCIM_BRPM_32 0x0 #define PCIM_BRPM_64 0x1 #define PCIM_BRPM_MASK 0xf #define PCIR_BIOS_1 0x38 #define PCIR_BRIDGECTL_1 0x3e /* config registers for header type 2 (CardBus) devices */ #define PCIR_MAX_BAR_2 0 #define PCIR_CAP_PTR_2 0x14 #define PCIR_SECSTAT_2 0x16 #define PCIR_PRIBUS_2 0x18 #define PCIR_SECBUS_2 0x19 #define PCIR_SUBBUS_2 0x1a #define PCIR_SECLAT_2 0x1b #define PCIR_MEMBASE0_2 0x1c #define PCIR_MEMLIMIT0_2 0x20 #define PCIR_MEMBASE1_2 0x24 #define PCIR_MEMLIMIT1_2 0x28 #define PCIR_IOBASE0_2 0x2c #define PCIR_IOLIMIT0_2 0x30 #define PCIR_IOBASE1_2 0x34 #define PCIR_IOLIMIT1_2 0x38 #define PCIR_BRIDGECTL_2 0x3e #define PCIR_SUBVEND_2 0x40 #define PCIR_SUBDEV_2 0x42 #define PCIR_PCCARDIF_2 0x44 /* PCI device class, subclass and programming interface definitions */ #define PCIC_OLD 0x00 #define PCIS_OLD_NONVGA 0x00 #define PCIS_OLD_VGA 0x01 #define PCIC_STORAGE 0x01 #define PCIS_STORAGE_SCSI 0x00 #define PCIS_STORAGE_IDE 0x01 #define PCIP_STORAGE_IDE_MODEPRIM 0x01 #define PCIP_STORAGE_IDE_PROGINDPRIM 0x02 #define PCIP_STORAGE_IDE_MODESEC 0x04 #define PCIP_STORAGE_IDE_PROGINDSEC 0x08 #define PCIP_STORAGE_IDE_MASTERDEV 0x80 #define PCIS_STORAGE_FLOPPY 0x02 #define PCIS_STORAGE_IPI 0x03 #define PCIS_STORAGE_RAID 0x04 #define PCIS_STORAGE_ATA_ADMA 0x05 #define PCIS_STORAGE_SATA 0x06 #define PCIP_STORAGE_SATA_AHCI_1_0 0x01 #define PCIS_STORAGE_SAS 0x07 #define PCIS_STORAGE_NVM 0x08 #define PCIP_STORAGE_NVM_NVMHCI_1_0 0x01 #define PCIP_STORAGE_NVM_ENTERPRISE_NVMHCI_1_0 0x02 #define PCIS_STORAGE_OTHER 0x80 #define PCIC_NETWORK 0x02 #define PCIS_NETWORK_ETHERNET 0x00 #define PCIS_NETWORK_TOKENRING 0x01 #define PCIS_NETWORK_FDDI 0x02 #define PCIS_NETWORK_ATM 0x03 #define PCIS_NETWORK_ISDN 0x04 #define PCIS_NETWORK_WORLDFIP 0x05 #define PCIS_NETWORK_PICMG 0x06 #define PCIS_NETWORK_OTHER 0x80 #define PCIC_DISPLAY 0x03 #define PCIS_DISPLAY_VGA 0x00 #define PCIS_DISPLAY_XGA 0x01 #define PCIS_DISPLAY_3D 0x02 #define PCIS_DISPLAY_OTHER 0x80 #define PCIC_MULTIMEDIA 0x04 #define PCIS_MULTIMEDIA_VIDEO 0x00 #define PCIS_MULTIMEDIA_AUDIO 0x01 #define PCIS_MULTIMEDIA_TELE 0x02 #define PCIS_MULTIMEDIA_HDA 0x03 #define PCIS_MULTIMEDIA_OTHER 0x80 #define PCIC_MEMORY 0x05 #define PCIS_MEMORY_RAM 0x00 #define PCIS_MEMORY_FLASH 0x01 #define PCIS_MEMORY_OTHER 0x80 #define PCIC_BRIDGE 0x06 #define PCIS_BRIDGE_HOST 0x00 #define PCIS_BRIDGE_ISA 0x01 #define PCIS_BRIDGE_EISA 0x02 #define PCIS_BRIDGE_MCA 0x03 #define PCIS_BRIDGE_PCI 0x04 #define PCIP_BRIDGE_PCI_SUBTRACTIVE 0x01 #define PCIS_BRIDGE_PCMCIA 0x05 #define PCIS_BRIDGE_NUBUS 0x06 #define PCIS_BRIDGE_CARDBUS 0x07 #define PCIS_BRIDGE_RACEWAY 0x08 #define PCIS_BRIDGE_PCI_TRANSPARENT 0x09 #define PCIS_BRIDGE_INFINIBAND 0x0a #define PCIS_BRIDGE_OTHER 0x80 #define PCIC_SIMPLECOMM 0x07 #define PCIS_SIMPLECOMM_UART 0x00 #define PCIP_SIMPLECOMM_UART_8250 0x00 #define PCIP_SIMPLECOMM_UART_16450A 0x01 #define PCIP_SIMPLECOMM_UART_16550A 0x02 #define PCIP_SIMPLECOMM_UART_16650A 0x03 #define PCIP_SIMPLECOMM_UART_16750A 0x04 #define PCIP_SIMPLECOMM_UART_16850A 0x05 #define PCIP_SIMPLECOMM_UART_16950A 0x06 #define PCIS_SIMPLECOMM_PAR 0x01 #define PCIS_SIMPLECOMM_MULSER 0x02 #define PCIS_SIMPLECOMM_MODEM 0x03 #define PCIS_SIMPLECOMM_GPIB 0x04 #define PCIS_SIMPLECOMM_SMART_CARD 0x05 #define PCIS_SIMPLECOMM_OTHER 0x80 #define PCIC_BASEPERIPH 0x08 #define PCIS_BASEPERIPH_PIC 0x00 #define PCIP_BASEPERIPH_PIC_8259A 0x00 #define PCIP_BASEPERIPH_PIC_ISA 0x01 #define PCIP_BASEPERIPH_PIC_EISA 0x02 #define PCIP_BASEPERIPH_PIC_IO_APIC 0x10 #define PCIP_BASEPERIPH_PIC_IOX_APIC 0x20 #define PCIS_BASEPERIPH_DMA 0x01 #define PCIS_BASEPERIPH_TIMER 0x02 #define PCIS_BASEPERIPH_RTC 0x03 #define PCIS_BASEPERIPH_PCIHOT 0x04 #define PCIS_BASEPERIPH_SDHC 0x05 #define PCIS_BASEPERIPH_IOMMU 0x06 #define PCIS_BASEPERIPH_OTHER 0x80 #define PCIC_INPUTDEV 0x09 #define PCIS_INPUTDEV_KEYBOARD 0x00 #define PCIS_INPUTDEV_DIGITIZER 0x01 #define PCIS_INPUTDEV_MOUSE 0x02 #define PCIS_INPUTDEV_SCANNER 0x03 #define PCIS_INPUTDEV_GAMEPORT 0x04 #define PCIS_INPUTDEV_OTHER 0x80 #define PCIC_DOCKING 0x0a #define PCIS_DOCKING_GENERIC 0x00 #define PCIS_DOCKING_OTHER 0x80 #define PCIC_PROCESSOR 0x0b #define PCIS_PROCESSOR_386 0x00 #define PCIS_PROCESSOR_486 0x01 #define PCIS_PROCESSOR_PENTIUM 0x02 #define PCIS_PROCESSOR_ALPHA 0x10 #define PCIS_PROCESSOR_POWERPC 0x20 #define PCIS_PROCESSOR_MIPS 0x30 #define PCIS_PROCESSOR_COPROC 0x40 #define PCIC_SERIALBUS 0x0c #define PCIS_SERIALBUS_FW 0x00 #define PCIS_SERIALBUS_ACCESS 0x01 #define PCIS_SERIALBUS_SSA 0x02 #define PCIS_SERIALBUS_USB 0x03 #define PCIP_SERIALBUS_USB_UHCI 0x00 #define PCIP_SERIALBUS_USB_OHCI 0x10 #define PCIP_SERIALBUS_USB_EHCI 0x20 #define PCIP_SERIALBUS_USB_XHCI 0x30 #define PCIP_SERIALBUS_USB_DEVICE 0xfe #define PCIS_SERIALBUS_FC 0x04 #define PCIS_SERIALBUS_SMBUS 0x05 #define PCIS_SERIALBUS_INFINIBAND 0x06 #define PCIS_SERIALBUS_IPMI 0x07 #define PCIP_SERIALBUS_IPMI_SMIC 0x00 #define PCIP_SERIALBUS_IPMI_KCS 0x01 #define PCIP_SERIALBUS_IPMI_BT 0x02 #define PCIS_SERIALBUS_SERCOS 0x08 #define PCIS_SERIALBUS_CANBUS 0x09 #define PCIC_WIRELESS 0x0d #define PCIS_WIRELESS_IRDA 0x00 #define PCIS_WIRELESS_IR 0x01 #define PCIS_WIRELESS_RF 0x10 #define PCIS_WIRELESS_BLUETOOTH 0x11 #define PCIS_WIRELESS_BROADBAND 0x12 #define PCIS_WIRELESS_80211A 0x20 #define PCIS_WIRELESS_80211B 0x21 #define PCIS_WIRELESS_OTHER 0x80 #define PCIC_INTELLIIO 0x0e #define PCIS_INTELLIIO_I2O 0x00 #define PCIC_SATCOM 0x0f #define PCIS_SATCOM_TV 0x01 #define PCIS_SATCOM_AUDIO 0x02 #define PCIS_SATCOM_VOICE 0x03 #define PCIS_SATCOM_DATA 0x04 #define PCIC_CRYPTO 0x10 #define PCIS_CRYPTO_NETCOMP 0x00 #define PCIS_CRYPTO_ENTERTAIN 0x10 #define PCIS_CRYPTO_OTHER 0x80 #define PCIC_DASP 0x11 #define PCIS_DASP_DPIO 0x00 #define PCIS_DASP_PERFCNTRS 0x01 #define PCIS_DASP_COMM_SYNC 0x10 #define PCIS_DASP_MGMT_CARD 0x20 #define PCIS_DASP_OTHER 0x80 #define PCIC_OTHER 0xff /* Bridge Control Values. */ #define PCIB_BCR_PERR_ENABLE 0x0001 #define PCIB_BCR_SERR_ENABLE 0x0002 #define PCIB_BCR_ISA_ENABLE 0x0004 #define PCIB_BCR_VGA_ENABLE 0x0008 #define PCIB_BCR_MASTER_ABORT_MODE 0x0020 #define PCIB_BCR_SECBUS_RESET 0x0040 #define PCIB_BCR_SECBUS_BACKTOBACK 0x0080 #define PCIB_BCR_PRI_DISCARD_TIMEOUT 0x0100 #define PCIB_BCR_SEC_DISCARD_TIMEOUT 0x0200 #define PCIB_BCR_DISCARD_TIMER_STATUS 0x0400 #define PCIB_BCR_DISCARD_TIMER_SERREN 0x0800 /* PCI power manangement */ #define PCIR_POWER_CAP 0x2 #define PCIM_PCAP_SPEC 0x0007 #define PCIM_PCAP_PMEREQCLK 0x0008 #define PCIM_PCAP_DEVSPECINIT 0x0020 #define PCIM_PCAP_AUXPWR_0 0x0000 #define PCIM_PCAP_AUXPWR_55 0x0040 #define PCIM_PCAP_AUXPWR_100 0x0080 #define PCIM_PCAP_AUXPWR_160 0x00c0 #define PCIM_PCAP_AUXPWR_220 0x0100 #define PCIM_PCAP_AUXPWR_270 0x0140 #define PCIM_PCAP_AUXPWR_320 0x0180 #define PCIM_PCAP_AUXPWR_375 0x01c0 #define PCIM_PCAP_AUXPWRMASK 0x01c0 #define PCIM_PCAP_D1SUPP 0x0200 #define PCIM_PCAP_D2SUPP 0x0400 #define PCIM_PCAP_D0PME 0x0800 #define PCIM_PCAP_D1PME 0x1000 #define PCIM_PCAP_D2PME 0x2000 #define PCIM_PCAP_D3PME_HOT 0x4000 #define PCIM_PCAP_D3PME_COLD 0x8000 #define PCIR_POWER_STATUS 0x4 #define PCIM_PSTAT_D0 0x0000 #define PCIM_PSTAT_D1 0x0001 #define PCIM_PSTAT_D2 0x0002 #define PCIM_PSTAT_D3 0x0003 #define PCIM_PSTAT_DMASK 0x0003 #define PCIM_PSTAT_NOSOFTRESET 0x0008 #define PCIM_PSTAT_PMEENABLE 0x0100 #define PCIM_PSTAT_D0POWER 0x0000 #define PCIM_PSTAT_D1POWER 0x0200 #define PCIM_PSTAT_D2POWER 0x0400 #define PCIM_PSTAT_D3POWER 0x0600 #define PCIM_PSTAT_D0HEAT 0x0800 #define PCIM_PSTAT_D1HEAT 0x0a00 #define PCIM_PSTAT_D2HEAT 0x0c00 #define PCIM_PSTAT_D3HEAT 0x0e00 #define PCIM_PSTAT_DATASELMASK 0x1e00 #define PCIM_PSTAT_DATAUNKN 0x0000 #define PCIM_PSTAT_DATADIV10 0x2000 #define PCIM_PSTAT_DATADIV100 0x4000 #define PCIM_PSTAT_DATADIV1000 0x6000 #define PCIM_PSTAT_DATADIVMASK 0x6000 #define PCIM_PSTAT_PME 0x8000 #define PCIR_POWER_BSE 0x6 #define PCIM_PMCSR_BSE_D3B3 0x00 #define PCIM_PMCSR_BSE_D3B2 0x40 #define PCIM_PMCSR_BSE_BPCCE 0x80 #define PCIR_POWER_DATA 0x7 /* VPD capability registers */ #define PCIR_VPD_ADDR 0x2 #define PCIR_VPD_DATA 0x4 /* PCI Message Signalled Interrupts (MSI) */ #define PCIR_MSI_CTRL 0x2 #define PCIM_MSICTRL_VECTOR 0x0100 #define PCIM_MSICTRL_64BIT 0x0080 #define PCIM_MSICTRL_MME_MASK 0x0070 #define PCIM_MSICTRL_MME_1 0x0000 #define PCIM_MSICTRL_MME_2 0x0010 #define PCIM_MSICTRL_MME_4 0x0020 #define PCIM_MSICTRL_MME_8 0x0030 #define PCIM_MSICTRL_MME_16 0x0040 #define PCIM_MSICTRL_MME_32 0x0050 #define PCIM_MSICTRL_MMC_MASK 0x000E #define PCIM_MSICTRL_MMC_1 0x0000 #define PCIM_MSICTRL_MMC_2 0x0002 #define PCIM_MSICTRL_MMC_4 0x0004 #define PCIM_MSICTRL_MMC_8 0x0006 #define PCIM_MSICTRL_MMC_16 0x0008 #define PCIM_MSICTRL_MMC_32 0x000A #define PCIM_MSICTRL_MSI_ENABLE 0x0001 #define PCIR_MSI_ADDR 0x4 #define PCIR_MSI_ADDR_HIGH 0x8 #define PCIR_MSI_DATA 0x8 #define PCIR_MSI_DATA_64BIT 0xc #define PCIR_MSI_MASK 0x10 #define PCIR_MSI_PENDING 0x14 /* PCI-X definitions */ /* For header type 0 devices */ #define PCIXR_COMMAND 0x2 #define PCIXM_COMMAND_DPERR_E 0x0001 /* Data Parity Error Recovery */ #define PCIXM_COMMAND_ERO 0x0002 /* Enable Relaxed Ordering */ #define PCIXM_COMMAND_MAX_READ 0x000c /* Maximum Burst Read Count */ #define PCIXM_COMMAND_MAX_READ_512 0x0000 #define PCIXM_COMMAND_MAX_READ_1024 0x0004 #define PCIXM_COMMAND_MAX_READ_2048 0x0008 #define PCIXM_COMMAND_MAX_READ_4096 0x000c #define PCIXM_COMMAND_MAX_SPLITS 0x0070 /* Maximum Split Transactions */ #define PCIXM_COMMAND_MAX_SPLITS_1 0x0000 #define PCIXM_COMMAND_MAX_SPLITS_2 0x0010 #define PCIXM_COMMAND_MAX_SPLITS_3 0x0020 #define PCIXM_COMMAND_MAX_SPLITS_4 0x0030 #define PCIXM_COMMAND_MAX_SPLITS_8 0x0040 #define PCIXM_COMMAND_MAX_SPLITS_12 0x0050 #define PCIXM_COMMAND_MAX_SPLITS_16 0x0060 #define PCIXM_COMMAND_MAX_SPLITS_32 0x0070 #define PCIXM_COMMAND_VERSION 0x3000 #define PCIXR_STATUS 0x4 #define PCIXM_STATUS_DEVFN 0x000000FF #define PCIXM_STATUS_BUS 0x0000FF00 #define PCIXM_STATUS_64BIT 0x00010000 #define PCIXM_STATUS_133CAP 0x00020000 #define PCIXM_STATUS_SC_DISCARDED 0x00040000 #define PCIXM_STATUS_UNEXP_SC 0x00080000 #define PCIXM_STATUS_COMPLEX_DEV 0x00100000 #define PCIXM_STATUS_MAX_READ 0x00600000 #define PCIXM_STATUS_MAX_READ_512 0x00000000 #define PCIXM_STATUS_MAX_READ_1024 0x00200000 #define PCIXM_STATUS_MAX_READ_2048 0x00400000 #define PCIXM_STATUS_MAX_READ_4096 0x00600000 #define PCIXM_STATUS_MAX_SPLITS 0x03800000 #define PCIXM_STATUS_MAX_SPLITS_1 0x00000000 #define PCIXM_STATUS_MAX_SPLITS_2 0x00800000 #define PCIXM_STATUS_MAX_SPLITS_3 0x01000000 #define PCIXM_STATUS_MAX_SPLITS_4 0x01800000 #define PCIXM_STATUS_MAX_SPLITS_8 0x02000000 #define PCIXM_STATUS_MAX_SPLITS_12 0x02800000 #define PCIXM_STATUS_MAX_SPLITS_16 0x03000000 #define PCIXM_STATUS_MAX_SPLITS_32 0x03800000 #define PCIXM_STATUS_MAX_CUM_READ 0x1C000000 #define PCIXM_STATUS_RCVD_SC_ERR 0x20000000 #define PCIXM_STATUS_266CAP 0x40000000 #define PCIXM_STATUS_533CAP 0x80000000 /* For header type 1 devices (PCI-X bridges) */ #define PCIXR_SEC_STATUS 0x2 #define PCIXM_SEC_STATUS_64BIT 0x0001 #define PCIXM_SEC_STATUS_133CAP 0x0002 #define PCIXM_SEC_STATUS_SC_DISC 0x0004 #define PCIXM_SEC_STATUS_UNEXP_SC 0x0008 #define PCIXM_SEC_STATUS_SC_OVERRUN 0x0010 #define PCIXM_SEC_STATUS_SR_DELAYED 0x0020 #define PCIXM_SEC_STATUS_BUS_MODE 0x03c0 #define PCIXM_SEC_STATUS_VERSION 0x3000 #define PCIXM_SEC_STATUS_266CAP 0x4000 #define PCIXM_SEC_STATUS_533CAP 0x8000 #define PCIXR_BRIDGE_STATUS 0x4 #define PCIXM_BRIDGE_STATUS_DEVFN 0x000000FF #define PCIXM_BRIDGE_STATUS_BUS 0x0000FF00 #define PCIXM_BRIDGE_STATUS_64BIT 0x00010000 #define PCIXM_BRIDGE_STATUS_133CAP 0x00020000 #define PCIXM_BRIDGE_STATUS_SC_DISCARDED 0x00040000 #define PCIXM_BRIDGE_STATUS_UNEXP_SC 0x00080000 #define PCIXM_BRIDGE_STATUS_SC_OVERRUN 0x00100000 #define PCIXM_BRIDGE_STATUS_SR_DELAYED 0x00200000 #define PCIXM_BRIDGE_STATUS_DEVID_MSGCAP 0x20000000 #define PCIXM_BRIDGE_STATUS_266CAP 0x40000000 #define PCIXM_BRIDGE_STATUS_533CAP 0x80000000 /* HT (HyperTransport) Capability definitions */ #define PCIR_HT_COMMAND 0x2 #define PCIM_HTCMD_CAP_MASK 0xf800 /* Capability type. */ #define PCIM_HTCAP_SLAVE 0x0000 /* 000xx */ #define PCIM_HTCAP_HOST 0x2000 /* 001xx */ #define PCIM_HTCAP_SWITCH 0x4000 /* 01000 */ #define PCIM_HTCAP_INTERRUPT 0x8000 /* 10000 */ #define PCIM_HTCAP_REVISION_ID 0x8800 /* 10001 */ #define PCIM_HTCAP_UNITID_CLUMPING 0x9000 /* 10010 */ #define PCIM_HTCAP_EXT_CONFIG_SPACE 0x9800 /* 10011 */ #define PCIM_HTCAP_ADDRESS_MAPPING 0xa000 /* 10100 */ #define PCIM_HTCAP_MSI_MAPPING 0xa800 /* 10101 */ #define PCIM_HTCAP_DIRECT_ROUTE 0xb000 /* 10110 */ #define PCIM_HTCAP_VCSET 0xb800 /* 10111 */ #define PCIM_HTCAP_RETRY_MODE 0xc000 /* 11000 */ #define PCIM_HTCAP_X86_ENCODING 0xc800 /* 11001 */ #define PCIM_HTCAP_GEN3 0xd000 /* 11010 */ #define PCIM_HTCAP_FLE 0xd800 /* 11011 */ #define PCIM_HTCAP_PM 0xe000 /* 11100 */ #define PCIM_HTCAP_HIGH_NODE_COUNT 0xe800 /* 11101 */ /* HT MSI Mapping Capability definitions. */ #define PCIM_HTCMD_MSI_ENABLE 0x0001 #define PCIM_HTCMD_MSI_FIXED 0x0002 #define PCIR_HTMSI_ADDRESS_LO 0x4 #define PCIR_HTMSI_ADDRESS_HI 0x8 /* PCI Vendor capability definitions */ #define PCIR_VENDOR_LENGTH 0x2 #define PCIR_VENDOR_DATA 0x3 /* PCI EHCI Debug Port definitions */ #define PCIR_DEBUG_PORT 0x2 #define PCIM_DEBUG_PORT_OFFSET 0x1FFF #define PCIM_DEBUG_PORT_BAR 0xe000 /* PCI-PCI Bridge Subvendor definitions */ #define PCIR_SUBVENDCAP_ID 0x4 /* PCI Express definitions */ #define PCIER_FLAGS 0x2 #define PCIEM_FLAGS_VERSION 0x000F #define PCIEM_FLAGS_TYPE 0x00F0 #define PCIEM_TYPE_ENDPOINT 0x0000 #define PCIEM_TYPE_LEGACY_ENDPOINT 0x0010 #define PCIEM_TYPE_ROOT_PORT 0x0040 #define PCIEM_TYPE_UPSTREAM_PORT 0x0050 #define PCIEM_TYPE_DOWNSTREAM_PORT 0x0060 #define PCIEM_TYPE_PCI_BRIDGE 0x0070 #define PCIEM_TYPE_PCIE_BRIDGE 0x0080 #define PCIEM_TYPE_ROOT_INT_EP 0x0090 #define PCIEM_TYPE_ROOT_EC 0x00a0 #define PCIEM_FLAGS_SLOT 0x0100 #define PCIEM_FLAGS_IRQ 0x3e00 #define PCIER_DEVICE_CAP 0x4 #define PCIEM_CAP_MAX_PAYLOAD 0x00000007 #define PCIEM_CAP_PHANTHOM_FUNCS 0x00000018 #define PCIEM_CAP_EXT_TAG_FIELD 0x00000020 #define PCIEM_CAP_L0S_LATENCY 0x000001c0 #define PCIEM_CAP_L1_LATENCY 0x00000e00 #define PCIEM_CAP_ROLE_ERR_RPT 0x00008000 #define PCIEM_CAP_SLOT_PWR_LIM_VAL 0x03fc0000 #define PCIEM_CAP_SLOT_PWR_LIM_SCALE 0x0c000000 #define PCIEM_CAP_FLR 0x10000000 #define PCIER_DEVICE_CTL 0x8 #define PCIEM_CTL_COR_ENABLE 0x0001 #define PCIEM_CTL_NFER_ENABLE 0x0002 #define PCIEM_CTL_FER_ENABLE 0x0004 #define PCIEM_CTL_URR_ENABLE 0x0008 #define PCIEM_CTL_RELAXED_ORD_ENABLE 0x0010 #define PCIEM_CTL_MAX_PAYLOAD 0x00e0 #define PCIEM_CTL_EXT_TAG_FIELD 0x0100 #define PCIEM_CTL_PHANTHOM_FUNCS 0x0200 #define PCIEM_CTL_AUX_POWER_PM 0x0400 #define PCIEM_CTL_NOSNOOP_ENABLE 0x0800 #define PCIEM_CTL_MAX_READ_REQUEST 0x7000 #define PCIEM_CTL_BRDG_CFG_RETRY 0x8000 /* PCI-E - PCI/PCI-X bridges */ #define PCIEM_CTL_INITIATE_FLR 0x8000 /* FLR capable endpoints */ #define PCIER_DEVICE_STA 0xa #define PCIEM_STA_CORRECTABLE_ERROR 0x0001 #define PCIEM_STA_NON_FATAL_ERROR 0x0002 #define PCIEM_STA_FATAL_ERROR 0x0004 #define PCIEM_STA_UNSUPPORTED_REQ 0x0008 #define PCIEM_STA_AUX_POWER 0x0010 #define PCIEM_STA_TRANSACTION_PND 0x0020 #define PCIER_LINK_CAP 0xc #define PCIEM_LINK_CAP_MAX_SPEED 0x0000000f #define PCIEM_LINK_CAP_MAX_WIDTH 0x000003f0 #define PCIEM_LINK_CAP_ASPM 0x00000c00 #define PCIEM_LINK_CAP_L0S_EXIT 0x00007000 #define PCIEM_LINK_CAP_L1_EXIT 0x00038000 #define PCIEM_LINK_CAP_CLOCK_PM 0x00040000 #define PCIEM_LINK_CAP_SURPRISE_DOWN 0x00080000 #define PCIEM_LINK_CAP_DL_ACTIVE 0x00100000 #define PCIEM_LINK_CAP_LINK_BW_NOTIFY 0x00200000 #define PCIEM_LINK_CAP_ASPM_COMPLIANCE 0x00400000 #define PCIEM_LINK_CAP_PORT 0xff000000 #define PCIER_LINK_CTL 0x10 #define PCIEM_LINK_CTL_ASPMC_DIS 0x0000 #define PCIEM_LINK_CTL_ASPMC_L0S 0x0001 #define PCIEM_LINK_CTL_ASPMC_L1 0x0002 #define PCIEM_LINK_CTL_ASPMC 0x0003 #define PCIEM_LINK_CTL_RCB 0x0008 #define PCIEM_LINK_CTL_LINK_DIS 0x0010 #define PCIEM_LINK_CTL_RETRAIN_LINK 0x0020 #define PCIEM_LINK_CTL_COMMON_CLOCK 0x0040 #define PCIEM_LINK_CTL_EXTENDED_SYNC 0x0080 #define PCIEM_LINK_CTL_ECPM 0x0100 #define PCIEM_LINK_CTL_HAWD 0x0200 #define PCIEM_LINK_CTL_LBMIE 0x0400 #define PCIEM_LINK_CTL_LABIE 0x0800 #define PCIER_LINK_STA 0x12 #define PCIEM_LINK_STA_SPEED 0x000f #define PCIEM_LINK_STA_WIDTH 0x03f0 #define PCIEM_LINK_STA_TRAINING_ERROR 0x0400 #define PCIEM_LINK_STA_TRAINING 0x0800 #define PCIEM_LINK_STA_SLOT_CLOCK 0x1000 #define PCIEM_LINK_STA_DL_ACTIVE 0x2000 #define PCIEM_LINK_STA_LINK_BW_MGMT 0x4000 #define PCIEM_LINK_STA_LINK_AUTO_BW 0x8000 #define PCIER_SLOT_CAP 0x14 #define PCIEM_SLOT_CAP_APB 0x00000001 #define PCIEM_SLOT_CAP_PCP 0x00000002 #define PCIEM_SLOT_CAP_MRLSP 0x00000004 #define PCIEM_SLOT_CAP_AIP 0x00000008 #define PCIEM_SLOT_CAP_PIP 0x00000010 #define PCIEM_SLOT_CAP_HPS 0x00000020 #define PCIEM_SLOT_CAP_HPC 0x00000040 #define PCIEM_SLOT_CAP_SPLV 0x00007f80 #define PCIEM_SLOT_CAP_SPLS 0x00018000 #define PCIEM_SLOT_CAP_EIP 0x00020000 #define PCIEM_SLOT_CAP_NCCS 0x00040000 #define PCIEM_SLOT_CAP_PSN 0xfff80000 #define PCIER_SLOT_CTL 0x18 #define PCIEM_SLOT_CTL_ABPE 0x0001 #define PCIEM_SLOT_CTL_PFDE 0x0002 #define PCIEM_SLOT_CTL_MRLSCE 0x0004 #define PCIEM_SLOT_CTL_PDCE 0x0008 #define PCIEM_SLOT_CTL_CCIE 0x0010 #define PCIEM_SLOT_CTL_HPIE 0x0020 #define PCIEM_SLOT_CTL_AIC 0x00c0 #define PCIEM_SLOT_CTL_PIC 0x0300 #define PCIEM_SLOT_CTL_PCC 0x0400 #define PCIEM_SLOT_CTL_EIC 0x0800 #define PCIEM_SLOT_CTL_DLLSCE 0x1000 #define PCIER_SLOT_STA 0x1a #define PCIEM_SLOT_STA_ABP 0x0001 #define PCIEM_SLOT_STA_PFD 0x0002 #define PCIEM_SLOT_STA_MRLSC 0x0004 #define PCIEM_SLOT_STA_PDC 0x0008 #define PCIEM_SLOT_STA_CC 0x0010 #define PCIEM_SLOT_STA_MRLSS 0x0020 #define PCIEM_SLOT_STA_PDS 0x0040 #define PCIEM_SLOT_STA_EIS 0x0080 #define PCIEM_SLOT_STA_DLLSC 0x0100 #define PCIER_ROOT_CTL 0x1c #define PCIEM_ROOT_CTL_SERR_CORR 0x0001 #define PCIEM_ROOT_CTL_SERR_NONFATAL 0x0002 #define PCIEM_ROOT_CTL_SERR_FATAL 0x0004 #define PCIEM_ROOT_CTL_PME 0x0008 #define PCIEM_ROOT_CTL_CRS_VIS 0x0010 #define PCIER_ROOT_CAP 0x1e #define PCIEM_ROOT_CAP_CRS_VIS 0x0001 #define PCIER_ROOT_STA 0x20 #define PCIEM_ROOT_STA_PME_REQID_MASK 0x0000ffff #define PCIEM_ROOT_STA_PME_STATUS 0x00010000 #define PCIEM_ROOT_STA_PME_PEND 0x00020000 #define PCIER_DEVICE_CAP2 0x24 #define PCIEM_CAP2_ARI 0x20 #define PCIER_DEVICE_CTL2 0x28 #define PCIEM_CTL2_COMP_TIMEOUT_VAL 0x000f #define PCIEM_CTL2_COMP_TIMEOUT_DIS 0x0010 #define PCIEM_CTL2_ARI 0x0020 #define PCIEM_CTL2_ATOMIC_REQ_ENABLE 0x0040 #define PCIEM_CTL2_ATOMIC_EGR_BLOCK 0x0080 #define PCIEM_CTL2_ID_ORDERED_REQ_EN 0x0100 #define PCIEM_CTL2_ID_ORDERED_CMP_EN 0x0200 #define PCIEM_CTL2_LTR_ENABLE 0x0400 #define PCIEM_CTL2_OBFF 0x6000 #define PCIEM_OBFF_DISABLE 0x0000 #define PCIEM_OBFF_MSGA_ENABLE 0x2000 #define PCIEM_OBFF_MSGB_ENABLE 0x4000 #define PCIEM_OBFF_WAKE_ENABLE 0x6000 #define PCIEM_CTL2_END2END_TLP 0x8000 #define PCIER_DEVICE_STA2 0x2a #define PCIER_LINK_CAP2 0x2c #define PCIER_LINK_CTL2 0x30 #define PCIER_LINK_STA2 0x32 #define PCIER_SLOT_CAP2 0x34 #define PCIER_SLOT_CTL2 0x38 #define PCIER_SLOT_STA2 0x3a /* MSI-X definitions */ #define PCIR_MSIX_CTRL 0x2 #define PCIM_MSIXCTRL_MSIX_ENABLE 0x8000 #define PCIM_MSIXCTRL_FUNCTION_MASK 0x4000 #define PCIM_MSIXCTRL_TABLE_SIZE 0x07FF #define PCIR_MSIX_TABLE 0x4 #define PCIR_MSIX_PBA 0x8 #define PCIM_MSIX_BIR_MASK 0x7 #define PCIM_MSIX_BIR_BAR_10 0 #define PCIM_MSIX_BIR_BAR_14 1 #define PCIM_MSIX_BIR_BAR_18 2 #define PCIM_MSIX_BIR_BAR_1C 3 #define PCIM_MSIX_BIR_BAR_20 4 #define PCIM_MSIX_BIR_BAR_24 5 #define PCIM_MSIX_VCTRL_MASK 0x1 /* PCI Advanced Features definitions */ #define PCIR_PCIAF_CAP 0x3 #define PCIM_PCIAFCAP_TP 0x01 #define PCIM_PCIAFCAP_FLR 0x02 #define PCIR_PCIAF_CTRL 0x4 #define PCIR_PCIAFCTRL_FLR 0x01 #define PCIR_PCIAF_STATUS 0x5 #define PCIR_PCIAFSTATUS_TP 0x01 /* Advanced Error Reporting */ #define PCIR_AER_UC_STATUS 0x04 #define PCIM_AER_UC_TRAINING_ERROR 0x00000001 #define PCIM_AER_UC_DL_PROTOCOL_ERROR 0x00000010 #define PCIM_AER_UC_SURPRISE_LINK_DOWN 0x00000020 #define PCIM_AER_UC_POISONED_TLP 0x00001000 #define PCIM_AER_UC_FC_PROTOCOL_ERROR 0x00002000 #define PCIM_AER_UC_COMPLETION_TIMEOUT 0x00004000 #define PCIM_AER_UC_COMPLETER_ABORT 0x00008000 #define PCIM_AER_UC_UNEXPECTED_COMPLETION 0x00010000 #define PCIM_AER_UC_RECEIVER_OVERFLOW 0x00020000 #define PCIM_AER_UC_MALFORMED_TLP 0x00040000 #define PCIM_AER_UC_ECRC_ERROR 0x00080000 #define PCIM_AER_UC_UNSUPPORTED_REQUEST 0x00100000 #define PCIM_AER_UC_ACS_VIOLATION 0x00200000 #define PCIM_AER_UC_INTERNAL_ERROR 0x00400000 #define PCIM_AER_UC_MC_BLOCKED_TLP 0x00800000 #define PCIM_AER_UC_ATOMIC_EGRESS_BLK 0x01000000 #define PCIM_AER_UC_TLP_PREFIX_BLOCKED 0x02000000 #define PCIR_AER_UC_MASK 0x08 /* Shares bits with UC_STATUS */ #define PCIR_AER_UC_SEVERITY 0x0c /* Shares bits with UC_STATUS */ #define PCIR_AER_COR_STATUS 0x10 #define PCIM_AER_COR_RECEIVER_ERROR 0x00000001 #define PCIM_AER_COR_BAD_TLP 0x00000040 #define PCIM_AER_COR_BAD_DLLP 0x00000080 #define PCIM_AER_COR_REPLAY_ROLLOVER 0x00000100 #define PCIM_AER_COR_REPLAY_TIMEOUT 0x00001000 #define PCIM_AER_COR_ADVISORY_NF_ERROR 0x00002000 #define PCIM_AER_COR_INTERNAL_ERROR 0x00004000 #define PCIM_AER_COR_HEADER_LOG_OVFLOW 0x00008000 #define PCIR_AER_COR_MASK 0x14 /* Shares bits with COR_STATUS */ #define PCIR_AER_CAP_CONTROL 0x18 #define PCIM_AER_FIRST_ERROR_PTR 0x0000001f #define PCIM_AER_ECRC_GEN_CAPABLE 0x00000020 #define PCIM_AER_ECRC_GEN_ENABLE 0x00000040 #define PCIM_AER_ECRC_CHECK_CAPABLE 0x00000080 #define PCIM_AER_ECRC_CHECK_ENABLE 0x00000100 #define PCIM_AER_MULT_HDR_CAPABLE 0x00000200 #define PCIM_AER_MULT_HDR_ENABLE 0x00000400 #define PCIM_AER_TLP_PREFIX_LOG_PRESENT 0x00000800 #define PCIR_AER_HEADER_LOG 0x1c #define PCIR_AER_ROOTERR_CMD 0x2c /* Only for root complex ports */ #define PCIM_AER_ROOTERR_COR_ENABLE 0x00000001 #define PCIM_AER_ROOTERR_NF_ENABLE 0x00000002 #define PCIM_AER_ROOTERR_F_ENABLE 0x00000004 #define PCIR_AER_ROOTERR_STATUS 0x30 /* Only for root complex ports */ #define PCIM_AER_ROOTERR_COR_ERR 0x00000001 #define PCIM_AER_ROOTERR_MULTI_COR_ERR 0x00000002 #define PCIM_AER_ROOTERR_UC_ERR 0x00000004 #define PCIM_AER_ROOTERR_MULTI_UC_ERR 0x00000008 #define PCIM_AER_ROOTERR_FIRST_UC_FATAL 0x00000010 #define PCIM_AER_ROOTERR_NF_ERR 0x00000020 #define PCIM_AER_ROOTERR_F_ERR 0x00000040 #define PCIM_AER_ROOTERR_INT_MESSAGE 0xf8000000 #define PCIR_AER_COR_SOURCE_ID 0x34 /* Only for root complex ports */ #define PCIR_AER_ERR_SOURCE_ID 0x36 /* Only for root complex ports */ #define PCIR_AER_TLP_PREFIX_LOG 0x38 /* Only for TLP prefix functions */ /* Virtual Channel definitions */ #define PCIR_VC_CAP1 0x04 #define PCIM_VC_CAP1_EXT_COUNT 0x00000007 #define PCIM_VC_CAP1_LOWPRI_EXT_COUNT 0x00000070 #define PCIR_VC_CAP2 0x08 #define PCIR_VC_CONTROL 0x0C #define PCIR_VC_STATUS 0x0E #define PCIR_VC_RESOURCE_CAP(n) (0x10 + (n) * 0x0C) #define PCIR_VC_RESOURCE_CTL(n) (0x14 + (n) * 0x0C) #define PCIR_VC_RESOURCE_STA(n) (0x18 + (n) * 0x0C) /* Serial Number definitions */ #define PCIR_SERIAL_LOW 0x04 #define PCIR_SERIAL_HIGH 0x08