Index: stable/10/sys/arm/conf/ARMADAXP =================================================================== --- stable/10/sys/arm/conf/ARMADAXP (revision 278676) +++ stable/10/sys/arm/conf/ARMADAXP (revision 278677) @@ -1,107 +1,107 @@ # # Custom kernel for Marvell Armada XP # # $FreeBSD$ # ident MV-88F78XX0 include "../mv/armadaxp/std.mv78x60" options SOC_MV_ARMADAXP makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" #options SCHED_ULE # ULE scheduler -options SCHED_4BSD # 4BSD scheduler +options SCHED_ULE # ULE scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCLIENT options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=mge0 options TMPFS # Efficient memory filesystem options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT options ROOTDEVNAME=\"ufs:/dev/da0p1\" options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING options VFP options SMP # Debugging #options VERBOSE_SYSINIT options ALT_BREAK_TO_DEBUGGER options DDB options GDB #options DIAGNOSTIC #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options KDB options KDB_TRACE #options KTR #options KTR_VERBOSE=0 #options KTR_ENTRIES=16384 #options KTR_MASK=(KTR_SPARE2) #options KTR_COMPILE=KTR_ALL #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options WITNESS_KDB # Pseudo devices device random device pty device loop device md # USB options USB_DEBUG # enable debug msgs device usb device ehci device umass device scbus device pass device da # SATA device mvs # Serial ports device uart # I2C (TWSI) device iic device iicbus #Network device ether device mge # Marvell Gigabit Ethernet controller device mii device e1000phy device bpf options HZ=1000 options DEVICE_POLLING device vlan #PCI/PCIE device pci #FDT options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=db78460.dts Index: stable/10/sys/arm/conf/CRB =================================================================== --- stable/10/sys/arm/conf/CRB (revision 278676) +++ stable/10/sys/arm/conf/CRB (revision 278677) @@ -1,113 +1,110 @@ # GENERIC -- Generic kernel configuration file for FreeBSD/arm # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CRB options PHYSADDR=0x00000000 options KERNPHYSADDR=0x00200000 options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm options COUNTS_PER_SEC=400000000 include "../xscale/i8134x/std.crb" makeoptions MODULES_OVERRIDE="" #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions CONF_CFLAGS=-mcpu=xscale options HZ=100 options BREAK_TO_DEBUGGER #options DEVICE_POLLING options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # New Network Filesystem Client options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL #options MSDOSFS # MSDOS Filesystem options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options INTR_FILTER options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=em0 options BOOTP_COMPAT #options PREEMPTION device loop device ether #device saarm device miibus device rl device em device uart device pci device ata options ATA_STATIC_ID # Static device numbering device scbus # SCSI bus (required for ATA/SCSI) device cd # CD device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) device "7seg" # SCSI Controllers #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # Debugging for use in -current options KDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC -# To make an SMP kernel, the next two are needed -#options SMP # Symmetric MultiProcessor Kernel -#options APIC_IO # Symmetric (APIC) I/O options XSCALE_CACHE_READ_WRITE_ALLOCATE device md device random # Entropy device device iopwdog # Floppy drives Index: stable/10/sys/arm/conf/CUBIEBOARD2 =================================================================== --- stable/10/sys/arm/conf/CUBIEBOARD2 (revision 278676) +++ stable/10/sys/arm/conf/CUBIEBOARD2 (revision 278677) @@ -1,141 +1,141 @@ # CUBIEBOARD2 -- Custom configuration for the CUBIEBOARD2 ARM development # platform, check out http://www.cubieboard.org # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD2 include "../allwinner/a20/std.a20" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options HZ=100 -options SCHED_4BSD # 4BSD scheduler +options SCHED_ULE # ULE scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PREEMPTION options FREEBSD_BOOT_LOADER options VFP # vfp/neon # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS support #options NFSCL #options NFSSERVER # Network Filesystem Server #options NFSCLIENT # Network Filesystem Client # Uncomment this for NFS root #options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # MMC/SD/SDIO card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers #options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf device emac # USB ethernet support, requires miibus device miibus # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard2.dts options SMP # Enable multiple cores Index: stable/10/sys/arm/conf/EP80219 =================================================================== --- stable/10/sys/arm/conf/EP80219 (revision 278676) +++ stable/10/sys/arm/conf/EP80219 (revision 278677) @@ -1,114 +1,111 @@ # EP80219 -- Custom kernel configuration file for FreeBSD/arm on the EP80219 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident EP80219 options PHYSADDR=0xa0000000 options KERNPHYSADDR=0xa0200000 options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm #options ARM32_NEW_VM_LAYOUT include "../xscale/i80321/std.ep80219" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions CONF_CFLAGS=-mcpu=xscale options HZ=100 #options DEVICE_POLLING options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # New Network Filesystem Client options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Providers labelization. options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=fxp0 options BOOTP_COMPAT #options PREEMPTION device loop device ether #device saarm device miibus device fxp device uart device pci device ata options ATA_STATIC_ID # Static device numbering device scbus # SCSI bus (required for ATA/SCSI) device cd # CD device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) # SCSI Controllers device iopwdog # I80321 Watchdog device dma # I80321 DMA Controller # Debugging for use in -current options KDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC -# To make an SMP kernel, the next two are needed -#options SMP # Symmetric MultiProcessor Kernel -#options APIC_IO # Symmetric (APIC) I/O options XSCALE_CACHE_READ_WRITE_ALLOCATE device md device random # Entropy device # Floppy drives options INCLUDE_CONFIG_FILE # Include this file in kernel #options VERBOSE_SYSINIT options VERBOSE_INIT_ARM device bpf #options ROOTDEVNAME=\"ufs:ada0s1a\" Index: stable/10/sys/arm/conf/EXYNOS5.common =================================================================== --- stable/10/sys/arm/conf/EXYNOS5.common (revision 278676) +++ stable/10/sys/arm/conf/EXYNOS5.common (revision 278677) @@ -1,131 +1,131 @@ # Kernel configuration for Samsung Exynos 5 SoC. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options HZ=100 -options SCHED_4BSD # 4BSD scheduler +options SCHED_ULE # ULE scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID partition tables options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem options SOFTUPDATES options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV options PREEMPTION options FREEBSD_BOOT_LOADER options VFP # vfp/neon options SMP # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS support options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCLIENT # Uncomment this for NFS root #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci options ROOTDEVNAME=\"ufs:/dev/da0\" # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device ehci #device ohci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs # Serial ports device uart # I2C (TWSI) device iic device iicbus # Ethernet device ether device mii device smsc device smscphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter Index: stable/10/sys/arm/conf/IQ31244 =================================================================== --- stable/10/sys/arm/conf/IQ31244 (revision 278676) +++ stable/10/sys/arm/conf/IQ31244 (revision 278677) @@ -1,113 +1,110 @@ # IQ31244 -- Custom kernel configuration file for FreeBSD/arm on the IQ31244 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IQ31244 options PHYSADDR=0xa0000000 options KERNPHYSADDR=0xa0200000 options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm options FLASHADDR=0xf0000000 options LOADERRAMADDR=0x00000000 include "../xscale/i80321/std.iq31244" makeoptions MODULES_OVERRIDE="" #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions CONF_CFLAGS=-mcpu=xscale options HZ=100 #options DEVICE_POLLING options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # New Network Filesystem Client options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=em0 options BOOTP_COMPAT #options PREEMPTION device loop device ether #device saarm device miibus device rl device em device uart device pci device ata options ATA_STATIC_ID # Static device numbering device scbus # SCSI bus (required for ATA/SCSI) device cd # CD device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) # SCSI Controllers device iopwdog # I80321 Watchdog device dma # I80321 DMA Controller device aau # I80321 Application Accelerator Unit device "iq31244_7seg" # IQ31244 7 seg #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # Debugging for use in -current options KDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC -# To make an SMP kernel, the next two are needed -#options SMP # Symmetric MultiProcessor Kernel -#options APIC_IO # Symmetric (APIC) I/O options XSCALE_CACHE_READ_WRITE_ALLOCATE device md device random # Entropy device # Floppy drives Index: stable/10/sys/arm/conf/PANDABOARD =================================================================== --- stable/10/sys/arm/conf/PANDABOARD (revision 278676) +++ stable/10/sys/arm/conf/PANDABOARD (revision 278677) @@ -1,150 +1,150 @@ # PANDABOARD -- Custom configuration for the PandaBoard ARM development # platform, check out www.pandaboard.org # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident PANDABOARD # This probably wants to move somewhere else. Maybe we can create a basic # OMAP4340 config, then make a PANDABOARD config that includes the basic one, # adds the start addresses and custom devices plus pulls in this hints file. hints "PANDABOARD.hints" include "../ti/omap4/pandaboard/std.pandaboard" #To statically compile in device wiring instead of /boot/device.hints makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options HZ=100 -options SCHED_4BSD # 4BSD scheduler +options SCHED_ULE # ULE scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PREEMPTION options FREEBSD_BOOT_LOADER options VFP # vfp/neon options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS support options NFSCL # NFS root options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device device pl310 # PL310 L2 cache controller # GPIO device gpio # The following enables MFS as root, this seems similar to an initramfs or initrd # as used in Linux. #options MD_ROOT #options MD_ROOT_SIZE=7560 # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device ohci device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smc device smcphy device bpf # USB Ethernet support, requires miibus device miibus #device axe # ASIX Electronics USB Ethernet device smsc # SMSC LAN95xx USB Ethernet # OMAP-specific devices device ti_sdma device twl device twl_vreg device twl_clks # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=pandaboard.dts Index: stable/10/sys/arm/conf/ZEDBOARD =================================================================== --- stable/10/sys/arm/conf/ZEDBOARD (revision 278676) +++ stable/10/sys/arm/conf/ZEDBOARD (revision 278677) @@ -1,104 +1,104 @@ # ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based # ZedBoard (www.zedboard.org) # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident ZEDBOARD include "../xilinx/zedboard/std.zedboard" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" -options SCHED_4BSD # 4BSD scheduler +options SCHED_ULE # ULE scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories # options ROOTDEVNAME=\"ufs:mmcsd0s2a\" options NFSCL # Network Filesystem Client # options NFSSD # Network Filesystem Server # options NFSLOCKD # Network Lock Manager # options NFS_ROOT # NFS usable as /, requires NFSCL # options BOOTP_NFSROOT # options BOOTP options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options FREEBSD_BOOT_LOADER options VFP # vfp/neon options SMP # Symmetric MultiProcessor Kernel # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB # options BREAK_TO_DEBUGGER # options INVARIANTS # Enable calls of extra sanity checking # options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS # options WITNESS # Enable checks to detect deadlocks and cycles # options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed device loop device random device ether device cgem # Zynq-7000 gig ethernet device device mii device e1000phy device pty device uart device gpio device md device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci device bpf # Berkeley packet filter # USB support device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device axe # USB-Ethernet # Flattened Device Tree options FDT # options FDT_DTB_STATIC # makeoptions FDT_DTS_FILE=zedboard.dts Index: stable/10 =================================================================== --- stable/10 (revision 278676) +++ stable/10 (revision 278677) Property changes on: stable/10 ___________________________________________________________________ Modified: svn:mergeinfo ## -0,0 +0,1 ## Merged /head:r276642,276644