Index: head/sys/dev/mps/mps.c =================================================================== --- head/sys/dev/mps/mps.c (revision 277716) +++ head/sys/dev/mps/mps.c (revision 277717) @@ -1,2699 +1,2705 @@ /*- * Copyright (c) 2009 Yahoo! Inc. * Copyright (c) 2012 LSI Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * LSI MPT-Fusion Host Adapter FreeBSD * * $FreeBSD$ */ #include __FBSDID("$FreeBSD$"); /* Communications core for LSI MPT2 */ /* TODO Move headers to mpsvar */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static int mps_diag_reset(struct mps_softc *sc, int sleep_flag); static int mps_init_queues(struct mps_softc *sc); static int mps_message_unit_reset(struct mps_softc *sc, int sleep_flag); static int mps_transition_operational(struct mps_softc *sc); static int mps_iocfacts_allocate(struct mps_softc *sc, uint8_t attaching); static void mps_iocfacts_free(struct mps_softc *sc); static void mps_startup(void *arg); static int mps_send_iocinit(struct mps_softc *sc); static int mps_alloc_queues(struct mps_softc *sc); static int mps_alloc_replies(struct mps_softc *sc); static int mps_alloc_requests(struct mps_softc *sc); static int mps_attach_log(struct mps_softc *sc); static __inline void mps_complete_command(struct mps_softc *sc, struct mps_command *cm); static void mps_dispatch_event(struct mps_softc *sc, uintptr_t data, MPI2_EVENT_NOTIFICATION_REPLY *reply); static void mps_config_complete(struct mps_softc *sc, struct mps_command *cm); static void mps_periodic(void *); static int mps_reregister_events(struct mps_softc *sc); static void mps_enqueue_request(struct mps_softc *sc, struct mps_command *cm); static int mps_get_iocfacts(struct mps_softc *sc, MPI2_IOC_FACTS_REPLY *facts); static int mps_wait_db_ack(struct mps_softc *sc, int timeout, int sleep_flag); SYSCTL_NODE(_hw, OID_AUTO, mps, CTLFLAG_RD, 0, "MPS Driver Parameters"); MALLOC_DEFINE(M_MPT2, "mps", "mpt2 driver memory"); /* * Do a "Diagnostic Reset" aka a hard reset. This should get the chip out of * any state and back to its initialization state machine. */ static char mpt2_reset_magic[] = { 0x00, 0x0f, 0x04, 0x0b, 0x02, 0x07, 0x0d }; /* Added this union to smoothly convert le64toh cm->cm_desc.Words. * Compiler only support unint64_t to be passed as argument. * Otherwise it will through below error * "aggregate value used where an integer was expected" */ typedef union _reply_descriptor { u64 word; struct { u32 low; u32 high; } u; }reply_descriptor,address_descriptor; /* Rate limit chain-fail messages to 1 per minute */ static struct timeval mps_chainfail_interval = { 60, 0 }; /* * sleep_flag can be either CAN_SLEEP or NO_SLEEP. * If this function is called from process context, it can sleep * and there is no harm to sleep, in case if this fuction is called * from Interrupt handler, we can not sleep and need NO_SLEEP flag set. * based on sleep flags driver will call either msleep, pause or DELAY. * msleep and pause are of same variant, but pause is used when mps_mtx * is not hold by driver. * */ static int mps_diag_reset(struct mps_softc *sc,int sleep_flag) { uint32_t reg; int i, error, tries = 0; uint8_t first_wait_done = FALSE; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); /* Clear any pending interrupts */ mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); /*Force NO_SLEEP for threads prohibited to sleep * e.a Thread from interrupt handler are prohibited to sleep. */ if (curthread->td_no_sleeping != 0) sleep_flag = NO_SLEEP; /* Push the magic sequence */ error = ETIMEDOUT; while (tries++ < 20) { for (i = 0; i < sizeof(mpt2_reset_magic); i++) mps_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET, mpt2_reset_magic[i]); /* wait 100 msec */ if (mtx_owned(&sc->mps_mtx) && sleep_flag == CAN_SLEEP) msleep(&sc->msleep_fake_chan, &sc->mps_mtx, 0, "mpsdiag", hz/10); else if (sleep_flag == CAN_SLEEP) pause("mpsdiag", hz/10); else DELAY(100 * 1000); reg = mps_regread(sc, MPI2_HOST_DIAGNOSTIC_OFFSET); if (reg & MPI2_DIAG_DIAG_WRITE_ENABLE) { error = 0; break; } } if (error) return (error); /* Send the actual reset. XXX need to refresh the reg? */ mps_regwrite(sc, MPI2_HOST_DIAGNOSTIC_OFFSET, reg | MPI2_DIAG_RESET_ADAPTER); /* Wait up to 300 seconds in 50ms intervals */ error = ETIMEDOUT; for (i = 0; i < 6000; i++) { /* * Wait 50 msec. If this is the first time through, wait 256 * msec to satisfy Diag Reset timing requirements. */ if (first_wait_done) { if (mtx_owned(&sc->mps_mtx) && sleep_flag == CAN_SLEEP) msleep(&sc->msleep_fake_chan, &sc->mps_mtx, 0, "mpsdiag", hz/20); else if (sleep_flag == CAN_SLEEP) pause("mpsdiag", hz/20); else DELAY(50 * 1000); } else { DELAY(256 * 1000); first_wait_done = TRUE; } /* * Check for the RESET_ADAPTER bit to be cleared first, then * wait for the RESET state to be cleared, which takes a little * longer. */ reg = mps_regread(sc, MPI2_HOST_DIAGNOSTIC_OFFSET); if (reg & MPI2_DIAG_RESET_ADAPTER) { continue; } reg = mps_regread(sc, MPI2_DOORBELL_OFFSET); if ((reg & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_RESET) { error = 0; break; } } if (error) return (error); mps_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET, 0x0); return (0); } static int mps_message_unit_reset(struct mps_softc *sc, int sleep_flag) { MPS_FUNCTRACE(sc); mps_regwrite(sc, MPI2_DOORBELL_OFFSET, MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET << MPI2_DOORBELL_FUNCTION_SHIFT); if (mps_wait_db_ack(sc, 5, sleep_flag) != 0) { mps_dprint(sc, MPS_FAULT, "Doorbell handshake failed : <%s>\n", __func__); return (ETIMEDOUT); } return (0); } static int mps_transition_ready(struct mps_softc *sc) { uint32_t reg, state; int error, tries = 0; int sleep_flags; MPS_FUNCTRACE(sc); /* If we are in attach call, do not sleep */ sleep_flags = (sc->mps_flags & MPS_FLAGS_ATTACH_DONE) ? CAN_SLEEP:NO_SLEEP; error = 0; while (tries++ < 1200) { reg = mps_regread(sc, MPI2_DOORBELL_OFFSET); mps_dprint(sc, MPS_INIT, "Doorbell= 0x%x\n", reg); /* * Ensure the IOC is ready to talk. If it's not, try * resetting it. */ if (reg & MPI2_DOORBELL_USED) { mps_diag_reset(sc, sleep_flags); DELAY(50000); continue; } /* Is the adapter owned by another peer? */ if ((reg & MPI2_DOORBELL_WHO_INIT_MASK) == (MPI2_WHOINIT_PCI_PEER << MPI2_DOORBELL_WHO_INIT_SHIFT)) { device_printf(sc->mps_dev, "IOC is under the control " "of another peer host, aborting initialization.\n"); return (ENXIO); } state = reg & MPI2_IOC_STATE_MASK; if (state == MPI2_IOC_STATE_READY) { /* Ready to go! */ error = 0; break; } else if (state == MPI2_IOC_STATE_FAULT) { mps_dprint(sc, MPS_FAULT, "IOC in fault state 0x%x, resetting\n", state & MPI2_DOORBELL_FAULT_CODE_MASK); mps_diag_reset(sc, sleep_flags); } else if (state == MPI2_IOC_STATE_OPERATIONAL) { /* Need to take ownership */ mps_message_unit_reset(sc, sleep_flags); } else if (state == MPI2_IOC_STATE_RESET) { /* Wait a bit, IOC might be in transition */ mps_dprint(sc, MPS_FAULT, "IOC in unexpected reset state\n"); } else { mps_dprint(sc, MPS_FAULT, "IOC in unknown state 0x%x\n", state); error = EINVAL; break; } /* Wait 50ms for things to settle down. */ DELAY(50000); } if (error) device_printf(sc->mps_dev, "Cannot transition IOC to ready\n"); return (error); } static int mps_transition_operational(struct mps_softc *sc) { uint32_t reg, state; int error; MPS_FUNCTRACE(sc); error = 0; reg = mps_regread(sc, MPI2_DOORBELL_OFFSET); mps_dprint(sc, MPS_INIT, "Doorbell= 0x%x\n", reg); state = reg & MPI2_IOC_STATE_MASK; if (state != MPI2_IOC_STATE_READY) { if ((error = mps_transition_ready(sc)) != 0) { mps_dprint(sc, MPS_FAULT, "%s failed to transition ready\n", __func__); return (error); } } error = mps_send_iocinit(sc); return (error); } /* * This is called during attach and when re-initializing due to a Diag Reset. * IOC Facts is used to allocate many of the structures needed by the driver. * If called from attach, de-allocation is not required because the driver has * not allocated any structures yet, but if called from a Diag Reset, previously * allocated structures based on IOC Facts will need to be freed and re- * allocated bases on the latest IOC Facts. */ static int mps_iocfacts_allocate(struct mps_softc *sc, uint8_t attaching) { int error; Mpi2IOCFactsReply_t saved_facts; uint8_t saved_mode, reallocating; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); /* Save old IOC Facts and then only reallocate if Facts have changed */ if (!attaching) { bcopy(sc->facts, &saved_facts, sizeof(MPI2_IOC_FACTS_REPLY)); } /* * Get IOC Facts. In all cases throughout this function, panic if doing * a re-initialization and only return the error if attaching so the OS * can handle it. */ if ((error = mps_get_iocfacts(sc, sc->facts)) != 0) { if (attaching) { mps_dprint(sc, MPS_FAULT, "%s failed to get IOC Facts " "with error %d\n", __func__, error); return (error); } else { panic("%s failed to get IOC Facts with error %d\n", __func__, error); } } mps_print_iocfacts(sc, sc->facts); snprintf(sc->fw_version, sizeof(sc->fw_version), "%02d.%02d.%02d.%02d", sc->facts->FWVersion.Struct.Major, sc->facts->FWVersion.Struct.Minor, sc->facts->FWVersion.Struct.Unit, sc->facts->FWVersion.Struct.Dev); mps_printf(sc, "Firmware: %s, Driver: %s\n", sc->fw_version, MPS_DRIVER_VERSION); mps_printf(sc, "IOCCapabilities: %b\n", sc->facts->IOCCapabilities, "\20" "\3ScsiTaskFull" "\4DiagTrace" "\5SnapBuf" "\6ExtBuf" "\7EEDP" "\10BiDirTarg" "\11Multicast" "\14TransRetry" "\15IR" "\16EventReplay" "\17RaidAccel" "\20MSIXIndex" "\21HostDisc"); /* * If the chip doesn't support event replay then a hard reset will be * required to trigger a full discovery. Do the reset here then * retransition to Ready. A hard reset might have already been done, * but it doesn't hurt to do it again. Only do this if attaching, not * for a Diag Reset. */ if (attaching) { if ((sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY) == 0) { mps_diag_reset(sc, NO_SLEEP); if ((error = mps_transition_ready(sc)) != 0) { mps_dprint(sc, MPS_FAULT, "%s failed to " "transition to ready with error %d\n", __func__, error); return (error); } } } /* * Set flag if IR Firmware is loaded. If the RAID Capability has * changed from the previous IOC Facts, log a warning, but only if * checking this after a Diag Reset and not during attach. */ saved_mode = sc->ir_firmware; if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) sc->ir_firmware = 1; if (!attaching) { if (sc->ir_firmware != saved_mode) { mps_dprint(sc, MPS_FAULT, "%s new IR/IT mode in IOC " "Facts does not match previous mode\n", __func__); } } /* Only deallocate and reallocate if relevant IOC Facts have changed */ reallocating = FALSE; if ((!attaching) && ((saved_facts.MsgVersion != sc->facts->MsgVersion) || (saved_facts.HeaderVersion != sc->facts->HeaderVersion) || (saved_facts.MaxChainDepth != sc->facts->MaxChainDepth) || (saved_facts.RequestCredit != sc->facts->RequestCredit) || (saved_facts.ProductID != sc->facts->ProductID) || (saved_facts.IOCCapabilities != sc->facts->IOCCapabilities) || (saved_facts.IOCRequestFrameSize != sc->facts->IOCRequestFrameSize) || (saved_facts.MaxTargets != sc->facts->MaxTargets) || (saved_facts.MaxSasExpanders != sc->facts->MaxSasExpanders) || (saved_facts.MaxEnclosures != sc->facts->MaxEnclosures) || (saved_facts.HighPriorityCredit != sc->facts->HighPriorityCredit) || (saved_facts.MaxReplyDescriptorPostQueueDepth != sc->facts->MaxReplyDescriptorPostQueueDepth) || (saved_facts.ReplyFrameSize != sc->facts->ReplyFrameSize) || (saved_facts.MaxVolumes != sc->facts->MaxVolumes) || (saved_facts.MaxPersistentEntries != sc->facts->MaxPersistentEntries))) { reallocating = TRUE; } /* * Some things should be done if attaching or re-allocating after a Diag * Reset, but are not needed after a Diag Reset if the FW has not * changed. */ if (attaching || reallocating) { /* * Check if controller supports FW diag buffers and set flag to * enable each type. */ if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_TRACE]. enabled = TRUE; if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_SNAPSHOT]. enabled = TRUE; if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) sc->fw_diag_buffer_list[MPI2_DIAG_BUF_TYPE_EXTENDED]. enabled = TRUE; /* * Set flag if EEDP is supported and if TLR is supported. */ if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) sc->eedp_enabled = TRUE; if (sc->facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) sc->control_TLR = TRUE; /* * Size the queues. Since the reply queues always need one free * entry, we'll just deduct one reply message here. */ sc->num_reqs = MIN(MPS_REQ_FRAMES, sc->facts->RequestCredit); sc->num_replies = MIN(MPS_REPLY_FRAMES + MPS_EVT_REPLY_FRAMES, sc->facts->MaxReplyDescriptorPostQueueDepth) - 1; /* * Initialize all Tail Queues */ TAILQ_INIT(&sc->req_list); TAILQ_INIT(&sc->high_priority_req_list); TAILQ_INIT(&sc->chain_list); TAILQ_INIT(&sc->tm_list); } /* * If doing a Diag Reset and the FW is significantly different * (reallocating will be set above in IOC Facts comparison), then all * buffers based on the IOC Facts will need to be freed before they are * reallocated. */ if (reallocating) { mps_iocfacts_free(sc); mpssas_realloc_targets(sc, saved_facts.MaxTargets); } /* * Any deallocation has been completed. Now start reallocating * if needed. Will only need to reallocate if attaching or if the new * IOC Facts are different from the previous IOC Facts after a Diag * Reset. Targets have already been allocated above if needed. */ if (attaching || reallocating) { if (((error = mps_alloc_queues(sc)) != 0) || ((error = mps_alloc_replies(sc)) != 0) || ((error = mps_alloc_requests(sc)) != 0)) { if (attaching ) { mps_dprint(sc, MPS_FAULT, "%s failed to alloc " "queues with error %d\n", __func__, error); mps_free(sc); return (error); } else { panic("%s failed to alloc queues with error " "%d\n", __func__, error); } } } /* Always initialize the queues */ bzero(sc->free_queue, sc->fqdepth * 4); mps_init_queues(sc); /* * Always get the chip out of the reset state, but only panic if not * attaching. If attaching and there is an error, that is handled by * the OS. */ error = mps_transition_operational(sc); if (error != 0) { if (attaching) { mps_printf(sc, "%s failed to transition to operational " "with error %d\n", __func__, error); mps_free(sc); return (error); } else { panic("%s failed to transition to operational with " "error %d\n", __func__, error); } } /* * Finish the queue initialization. * These are set here instead of in mps_init_queues() because the * IOC resets these values during the state transition in * mps_transition_operational(). The free index is set to 1 * because the corresponding index in the IOC is set to 0, and the * IOC treats the queues as full if both are set to the same value. * Hence the reason that the queue can't hold all of the possible * replies. */ sc->replypostindex = 0; mps_regwrite(sc, MPI2_REPLY_FREE_HOST_INDEX_OFFSET, sc->replyfreeindex); mps_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, 0); /* * Attach the subsystems so they can prepare their event masks. */ /* XXX Should be dynamic so that IM/IR and user modules can attach */ if (attaching) { if (((error = mps_attach_log(sc)) != 0) || ((error = mps_attach_sas(sc)) != 0) || ((error = mps_attach_user(sc)) != 0)) { mps_printf(sc, "%s failed to attach all subsystems: " "error %d\n", __func__, error); mps_free(sc); return (error); } if ((error = mps_pci_setup_interrupts(sc)) != 0) { mps_printf(sc, "%s failed to setup interrupts\n", __func__); mps_free(sc); return (error); } } /* * Set flag if this is a WD controller. This shouldn't ever change, but * reset it after a Diag Reset, just in case. */ sc->WD_available = FALSE; if (pci_get_device(sc->mps_dev) == MPI2_MFGPAGE_DEVID_SSS6200) sc->WD_available = TRUE; return (error); } /* * This is called if memory is being free (during detach for example) and when * buffers need to be reallocated due to a Diag Reset. */ static void mps_iocfacts_free(struct mps_softc *sc) { struct mps_command *cm; int i; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); if (sc->free_busaddr != 0) bus_dmamap_unload(sc->queues_dmat, sc->queues_map); if (sc->free_queue != NULL) bus_dmamem_free(sc->queues_dmat, sc->free_queue, sc->queues_map); if (sc->queues_dmat != NULL) bus_dma_tag_destroy(sc->queues_dmat); if (sc->chain_busaddr != 0) bus_dmamap_unload(sc->chain_dmat, sc->chain_map); if (sc->chain_frames != NULL) bus_dmamem_free(sc->chain_dmat, sc->chain_frames, sc->chain_map); if (sc->chain_dmat != NULL) bus_dma_tag_destroy(sc->chain_dmat); if (sc->sense_busaddr != 0) bus_dmamap_unload(sc->sense_dmat, sc->sense_map); if (sc->sense_frames != NULL) bus_dmamem_free(sc->sense_dmat, sc->sense_frames, sc->sense_map); if (sc->sense_dmat != NULL) bus_dma_tag_destroy(sc->sense_dmat); if (sc->reply_busaddr != 0) bus_dmamap_unload(sc->reply_dmat, sc->reply_map); if (sc->reply_frames != NULL) bus_dmamem_free(sc->reply_dmat, sc->reply_frames, sc->reply_map); if (sc->reply_dmat != NULL) bus_dma_tag_destroy(sc->reply_dmat); if (sc->req_busaddr != 0) bus_dmamap_unload(sc->req_dmat, sc->req_map); if (sc->req_frames != NULL) bus_dmamem_free(sc->req_dmat, sc->req_frames, sc->req_map); if (sc->req_dmat != NULL) bus_dma_tag_destroy(sc->req_dmat); if (sc->chains != NULL) free(sc->chains, M_MPT2); if (sc->commands != NULL) { for (i = 1; i < sc->num_reqs; i++) { cm = &sc->commands[i]; bus_dmamap_destroy(sc->buffer_dmat, cm->cm_dmamap); } free(sc->commands, M_MPT2); } if (sc->buffer_dmat != NULL) bus_dma_tag_destroy(sc->buffer_dmat); } /* * The terms diag reset and hard reset are used interchangeably in the MPI * docs to mean resetting the controller chip. In this code diag reset * cleans everything up, and the hard reset function just sends the reset * sequence to the chip. This should probably be refactored so that every * subsystem gets a reset notification of some sort, and can clean up * appropriately. */ int mps_reinit(struct mps_softc *sc) { int error; struct mpssas_softc *sassc; sassc = sc->sassc; MPS_FUNCTRACE(sc); mtx_assert(&sc->mps_mtx, MA_OWNED); if (sc->mps_flags & MPS_FLAGS_DIAGRESET) { mps_dprint(sc, MPS_INIT, "%s reset already in progress\n", __func__); return 0; } mps_dprint(sc, MPS_INFO, "Reinitializing controller,\n"); /* make sure the completion callbacks can recognize they're getting * a NULL cm_reply due to a reset. */ sc->mps_flags |= MPS_FLAGS_DIAGRESET; /* * Mask interrupts here. */ mps_dprint(sc, MPS_INIT, "%s mask interrupts\n", __func__); mps_mask_intr(sc); error = mps_diag_reset(sc, CAN_SLEEP); if (error != 0) { /* XXXSL No need to panic here */ panic("%s hard reset failed with error %d\n", __func__, error); } /* Restore the PCI state, including the MSI-X registers */ mps_pci_restore(sc); /* Give the I/O subsystem special priority to get itself prepared */ mpssas_handle_reinit(sc); /* * Get IOC Facts and allocate all structures based on this information. * The attach function will also call mps_iocfacts_allocate at startup. * If relevant values have changed in IOC Facts, this function will free * all of the memory based on IOC Facts and reallocate that memory. */ if ((error = mps_iocfacts_allocate(sc, FALSE)) != 0) { panic("%s IOC Facts based allocation failed with error %d\n", __func__, error); } /* * Mapping structures will be re-allocated after getting IOC Page8, so * free these structures here. */ mps_mapping_exit(sc); /* * The static page function currently read is IOC Page8. Others can be * added in future. It's possible that the values in IOC Page8 have * changed after a Diag Reset due to user modification, so always read * these. Interrupts are masked, so unmask them before getting config * pages. */ mps_unmask_intr(sc); sc->mps_flags &= ~MPS_FLAGS_DIAGRESET; mps_base_static_config_pages(sc); /* * Some mapping info is based in IOC Page8 data, so re-initialize the * mapping tables. */ mps_mapping_initialize(sc); /* * Restart will reload the event masks clobbered by the reset, and * then enable the port. */ mps_reregister_events(sc); /* the end of discovery will release the simq, so we're done. */ mps_dprint(sc, MPS_INFO, "%s finished sc %p post %u free %u\n", __func__, sc, sc->replypostindex, sc->replyfreeindex); mpssas_release_simq_reinit(sassc); return 0; } /* Wait for the chip to ACK a word that we've put into its FIFO * Wait for seconds. In single loop wait for busy loop * for 500 microseconds. * Total is [ 0.5 * (2000 * ) ] in miliseconds. * */ static int mps_wait_db_ack(struct mps_softc *sc, int timeout, int sleep_flag) { u32 cntdn, count; u32 int_status; u32 doorbell; count = 0; cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout; do { int_status = mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET); if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { mps_dprint(sc, MPS_INIT, "%s: successfull count(%d), timeout(%d)\n", __func__, count, timeout); return 0; } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { doorbell = mps_regread(sc, MPI2_DOORBELL_OFFSET); if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { mps_dprint(sc, MPS_FAULT, "fault_state(0x%04x)!\n", doorbell); return (EFAULT); } } else if (int_status == 0xFFFFFFFF) goto out; /* If it can sleep, sleep for 1 milisecond, else busy loop for * 0.5 milisecond */ if (mtx_owned(&sc->mps_mtx) && sleep_flag == CAN_SLEEP) msleep(&sc->msleep_fake_chan, &sc->mps_mtx, 0, "mpsdba", hz/1000); else if (sleep_flag == CAN_SLEEP) pause("mpsdba", hz/1000); else DELAY(500); count++; } while (--cntdn); out: mps_dprint(sc, MPS_FAULT, "%s: failed due to timeout count(%d), " "int_status(%x)!\n", __func__, count, int_status); return (ETIMEDOUT); } /* Wait for the chip to signal that the next word in its FIFO can be fetched */ static int mps_wait_db_int(struct mps_softc *sc) { int retry; for (retry = 0; retry < MPS_DB_MAX_WAIT; retry++) { if ((mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET) & MPI2_HIS_IOC2SYS_DB_STATUS) != 0) return (0); DELAY(2000); } return (ETIMEDOUT); } /* Step through the synchronous command state machine, i.e. "Doorbell mode" */ static int mps_request_sync(struct mps_softc *sc, void *req, MPI2_DEFAULT_REPLY *reply, int req_sz, int reply_sz, int timeout) { uint32_t *data32; uint16_t *data16; int i, count, ioc_sz, residual; int sleep_flags = CAN_SLEEP; if (curthread->td_no_sleeping != 0) sleep_flags = NO_SLEEP; /* Step 1 */ mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); /* Step 2 */ if (mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) return (EBUSY); /* Step 3 * Announce that a message is coming through the doorbell. Messages * are pushed at 32bit words, so round up if needed. */ count = (req_sz + 3) / 4; mps_regwrite(sc, MPI2_DOORBELL_OFFSET, (MPI2_FUNCTION_HANDSHAKE << MPI2_DOORBELL_FUNCTION_SHIFT) | (count << MPI2_DOORBELL_ADD_DWORDS_SHIFT)); /* Step 4 */ if (mps_wait_db_int(sc) || (mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) == 0) { mps_dprint(sc, MPS_FAULT, "Doorbell failed to activate\n"); return (ENXIO); } mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); if (mps_wait_db_ack(sc, 5, sleep_flags) != 0) { mps_dprint(sc, MPS_FAULT, "Doorbell handshake failed\n"); return (ENXIO); } /* Step 5 */ /* Clock out the message data synchronously in 32-bit dwords*/ data32 = (uint32_t *)req; for (i = 0; i < count; i++) { mps_regwrite(sc, MPI2_DOORBELL_OFFSET, htole32(data32[i])); if (mps_wait_db_ack(sc, 5, sleep_flags) != 0) { mps_dprint(sc, MPS_FAULT, "Timeout while writing doorbell\n"); return (ENXIO); } } /* Step 6 */ /* Clock in the reply in 16-bit words. The total length of the * message is always in the 4th byte, so clock out the first 2 words * manually, then loop the rest. */ data16 = (uint16_t *)reply; if (mps_wait_db_int(sc) != 0) { mps_dprint(sc, MPS_FAULT, "Timeout reading doorbell 0\n"); return (ENXIO); } data16[0] = mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK; mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); if (mps_wait_db_int(sc) != 0) { mps_dprint(sc, MPS_FAULT, "Timeout reading doorbell 1\n"); return (ENXIO); } data16[1] = mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK; mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); /* Number of 32bit words in the message */ ioc_sz = reply->MsgLength; /* * Figure out how many 16bit words to clock in without overrunning. * The precision loss with dividing reply_sz can safely be * ignored because the messages can only be multiples of 32bits. */ residual = 0; count = MIN((reply_sz / 4), ioc_sz) * 2; if (count < ioc_sz * 2) { residual = ioc_sz * 2 - count; mps_dprint(sc, MPS_ERROR, "Driver error, throwing away %d " "residual message words\n", residual); } for (i = 2; i < count; i++) { if (mps_wait_db_int(sc) != 0) { mps_dprint(sc, MPS_FAULT, "Timeout reading doorbell %d\n", i); return (ENXIO); } data16[i] = mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK; mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); } /* * Pull out residual words that won't fit into the provided buffer. * This keeps the chip from hanging due to a driver programming * error. */ while (residual--) { if (mps_wait_db_int(sc) != 0) { mps_dprint(sc, MPS_FAULT, "Timeout reading doorbell\n"); return (ENXIO); } (void)mps_regread(sc, MPI2_DOORBELL_OFFSET); mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); } /* Step 7 */ if (mps_wait_db_int(sc) != 0) { mps_dprint(sc, MPS_FAULT, "Timeout waiting to exit doorbell\n"); return (ENXIO); } if (mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) mps_dprint(sc, MPS_FAULT, "Warning, doorbell still active\n"); mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0); return (0); } static void mps_enqueue_request(struct mps_softc *sc, struct mps_command *cm) { reply_descriptor rd; MPS_FUNCTRACE(sc); mps_dprint(sc, MPS_TRACE, "SMID %u cm %p ccb %p\n", cm->cm_desc.Default.SMID, cm, cm->cm_ccb); if (sc->mps_flags & MPS_FLAGS_ATTACH_DONE && !(sc->mps_flags & MPS_FLAGS_SHUTDOWN)) mtx_assert(&sc->mps_mtx, MA_OWNED); if (++sc->io_cmds_active > sc->io_cmds_highwater) sc->io_cmds_highwater++; rd.u.low = cm->cm_desc.Words.Low; rd.u.high = cm->cm_desc.Words.High; rd.word = htole64(rd.word); /* TODO-We may need to make below regwrite atomic */ mps_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET, rd.u.low); mps_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET, rd.u.high); } /* * Just the FACTS, ma'am. */ static int mps_get_iocfacts(struct mps_softc *sc, MPI2_IOC_FACTS_REPLY *facts) { MPI2_DEFAULT_REPLY *reply; MPI2_IOC_FACTS_REQUEST request; int error, req_sz, reply_sz; MPS_FUNCTRACE(sc); req_sz = sizeof(MPI2_IOC_FACTS_REQUEST); reply_sz = sizeof(MPI2_IOC_FACTS_REPLY); reply = (MPI2_DEFAULT_REPLY *)facts; bzero(&request, req_sz); request.Function = MPI2_FUNCTION_IOC_FACTS; error = mps_request_sync(sc, &request, reply, req_sz, reply_sz, 5); return (error); } static int mps_send_iocinit(struct mps_softc *sc) { MPI2_IOC_INIT_REQUEST init; MPI2_DEFAULT_REPLY reply; int req_sz, reply_sz, error; struct timeval now; uint64_t time_in_msec; MPS_FUNCTRACE(sc); req_sz = sizeof(MPI2_IOC_INIT_REQUEST); reply_sz = sizeof(MPI2_IOC_INIT_REPLY); bzero(&init, req_sz); bzero(&reply, reply_sz); /* * Fill in the init block. Note that most addresses are * deliberately in the lower 32bits of memory. This is a micro- * optimzation for PCI/PCIX, though it's not clear if it helps PCIe. */ init.Function = MPI2_FUNCTION_IOC_INIT; init.WhoInit = MPI2_WHOINIT_HOST_DRIVER; init.MsgVersion = htole16(MPI2_VERSION); init.HeaderVersion = htole16(MPI2_HEADER_VERSION); init.SystemRequestFrameSize = htole16(sc->facts->IOCRequestFrameSize); init.ReplyDescriptorPostQueueDepth = htole16(sc->pqdepth); init.ReplyFreeQueueDepth = htole16(sc->fqdepth); init.SenseBufferAddressHigh = 0; init.SystemReplyAddressHigh = 0; init.SystemRequestFrameBaseAddress.High = 0; init.SystemRequestFrameBaseAddress.Low = htole32((uint32_t)sc->req_busaddr); init.ReplyDescriptorPostQueueAddress.High = 0; init.ReplyDescriptorPostQueueAddress.Low = htole32((uint32_t)sc->post_busaddr); init.ReplyFreeQueueAddress.High = 0; init.ReplyFreeQueueAddress.Low = htole32((uint32_t)sc->free_busaddr); getmicrotime(&now); time_in_msec = (now.tv_sec * 1000 + now.tv_usec/1000); init.TimeStamp.High = htole32((time_in_msec >> 32) & 0xFFFFFFFF); init.TimeStamp.Low = htole32(time_in_msec & 0xFFFFFFFF); error = mps_request_sync(sc, &init, &reply, req_sz, reply_sz, 5); if ((reply.IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS) error = ENXIO; mps_dprint(sc, MPS_INIT, "IOCInit status= 0x%x\n", reply.IOCStatus); return (error); } void mps_memaddr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) { bus_addr_t *addr; addr = arg; *addr = segs[0].ds_addr; } static int mps_alloc_queues(struct mps_softc *sc) { bus_addr_t queues_busaddr; uint8_t *queues; int qsize, fqsize, pqsize; /* * The reply free queue contains 4 byte entries in multiples of 16 and * aligned on a 16 byte boundary. There must always be an unused entry. * This queue supplies fresh reply frames for the firmware to use. * * The reply descriptor post queue contains 8 byte entries in * multiples of 16 and aligned on a 16 byte boundary. This queue * contains filled-in reply frames sent from the firmware to the host. * * These two queues are allocated together for simplicity. */ sc->fqdepth = roundup2((sc->num_replies + 1), 16); sc->pqdepth = roundup2((sc->num_replies + 1), 16); fqsize= sc->fqdepth * 4; pqsize = sc->pqdepth * 8; qsize = fqsize + pqsize; if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 16, 0, /* algnmnt, boundary */ BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ qsize, /* maxsize */ 1, /* nsegments */ qsize, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->queues_dmat)) { device_printf(sc->mps_dev, "Cannot allocate queues DMA tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->queues_dmat, (void **)&queues, BUS_DMA_NOWAIT, &sc->queues_map)) { device_printf(sc->mps_dev, "Cannot allocate queues memory\n"); return (ENOMEM); } bzero(queues, qsize); bus_dmamap_load(sc->queues_dmat, sc->queues_map, queues, qsize, mps_memaddr_cb, &queues_busaddr, 0); sc->free_queue = (uint32_t *)queues; sc->free_busaddr = queues_busaddr; sc->post_queue = (MPI2_REPLY_DESCRIPTORS_UNION *)(queues + fqsize); sc->post_busaddr = queues_busaddr + fqsize; return (0); } static int mps_alloc_replies(struct mps_softc *sc) { int rsize, num_replies; /* * sc->num_replies should be one less than sc->fqdepth. We need to * allocate space for sc->fqdepth replies, but only sc->num_replies * replies can be used at once. */ num_replies = max(sc->fqdepth, sc->num_replies); rsize = sc->facts->ReplyFrameSize * num_replies * 4; if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 4, 0, /* algnmnt, boundary */ BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ rsize, /* maxsize */ 1, /* nsegments */ rsize, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->reply_dmat)) { device_printf(sc->mps_dev, "Cannot allocate replies DMA tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->reply_dmat, (void **)&sc->reply_frames, BUS_DMA_NOWAIT, &sc->reply_map)) { device_printf(sc->mps_dev, "Cannot allocate replies memory\n"); return (ENOMEM); } bzero(sc->reply_frames, rsize); bus_dmamap_load(sc->reply_dmat, sc->reply_map, sc->reply_frames, rsize, mps_memaddr_cb, &sc->reply_busaddr, 0); return (0); } static int mps_alloc_requests(struct mps_softc *sc) { struct mps_command *cm; struct mps_chain *chain; int i, rsize, nsegs; rsize = sc->facts->IOCRequestFrameSize * sc->num_reqs * 4; if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 16, 0, /* algnmnt, boundary */ BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ rsize, /* maxsize */ 1, /* nsegments */ rsize, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->req_dmat)) { device_printf(sc->mps_dev, "Cannot allocate request DMA tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->req_dmat, (void **)&sc->req_frames, BUS_DMA_NOWAIT, &sc->req_map)) { device_printf(sc->mps_dev, "Cannot allocate request memory\n"); return (ENOMEM); } bzero(sc->req_frames, rsize); bus_dmamap_load(sc->req_dmat, sc->req_map, sc->req_frames, rsize, mps_memaddr_cb, &sc->req_busaddr, 0); rsize = sc->facts->IOCRequestFrameSize * sc->max_chains * 4; if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 16, 0, /* algnmnt, boundary */ BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ rsize, /* maxsize */ 1, /* nsegments */ rsize, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->chain_dmat)) { device_printf(sc->mps_dev, "Cannot allocate chain DMA tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->chain_dmat, (void **)&sc->chain_frames, BUS_DMA_NOWAIT, &sc->chain_map)) { device_printf(sc->mps_dev, "Cannot allocate chain memory\n"); return (ENOMEM); } bzero(sc->chain_frames, rsize); bus_dmamap_load(sc->chain_dmat, sc->chain_map, sc->chain_frames, rsize, mps_memaddr_cb, &sc->chain_busaddr, 0); rsize = MPS_SENSE_LEN * sc->num_reqs; if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 1, 0, /* algnmnt, boundary */ BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ rsize, /* maxsize */ 1, /* nsegments */ rsize, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->sense_dmat)) { device_printf(sc->mps_dev, "Cannot allocate sense DMA tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->sense_dmat, (void **)&sc->sense_frames, BUS_DMA_NOWAIT, &sc->sense_map)) { device_printf(sc->mps_dev, "Cannot allocate sense memory\n"); return (ENOMEM); } bzero(sc->sense_frames, rsize); bus_dmamap_load(sc->sense_dmat, sc->sense_map, sc->sense_frames, rsize, mps_memaddr_cb, &sc->sense_busaddr, 0); sc->chains = malloc(sizeof(struct mps_chain) * sc->max_chains, M_MPT2, M_WAITOK | M_ZERO); if(!sc->chains) { device_printf(sc->mps_dev, "Cannot allocate chains memory %s %d\n", __func__, __LINE__); return (ENOMEM); } for (i = 0; i < sc->max_chains; i++) { chain = &sc->chains[i]; chain->chain = (MPI2_SGE_IO_UNION *)(sc->chain_frames + i * sc->facts->IOCRequestFrameSize * 4); chain->chain_busaddr = sc->chain_busaddr + i * sc->facts->IOCRequestFrameSize * 4; mps_free_chain(sc, chain); sc->chain_free_lowwater++; } /* XXX Need to pick a more precise value */ nsegs = (MAXPHYS / PAGE_SIZE) + 1; if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 1, 0, /* algnmnt, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ BUS_SPACE_MAXSIZE_32BIT,/* maxsize */ nsegs, /* nsegments */ BUS_SPACE_MAXSIZE_24BIT,/* maxsegsize */ BUS_DMA_ALLOCNOW, /* flags */ busdma_lock_mutex, /* lockfunc */ &sc->mps_mtx, /* lockarg */ &sc->buffer_dmat)) { device_printf(sc->mps_dev, "Cannot allocate buffer DMA tag\n"); return (ENOMEM); } /* * SMID 0 cannot be used as a free command per the firmware spec. * Just drop that command instead of risking accounting bugs. */ sc->commands = malloc(sizeof(struct mps_command) * sc->num_reqs, M_MPT2, M_WAITOK | M_ZERO); if(!sc->commands) { device_printf(sc->mps_dev, "Cannot allocate memory %s %d\n", __func__, __LINE__); return (ENOMEM); } for (i = 1; i < sc->num_reqs; i++) { cm = &sc->commands[i]; cm->cm_req = sc->req_frames + i * sc->facts->IOCRequestFrameSize * 4; cm->cm_req_busaddr = sc->req_busaddr + i * sc->facts->IOCRequestFrameSize * 4; cm->cm_sense = &sc->sense_frames[i]; cm->cm_sense_busaddr = sc->sense_busaddr + i * MPS_SENSE_LEN; cm->cm_desc.Default.SMID = i; cm->cm_sc = sc; TAILQ_INIT(&cm->cm_chain_list); callout_init_mtx(&cm->cm_callout, &sc->mps_mtx, 0); /* XXX Is a failure here a critical problem? */ if (bus_dmamap_create(sc->buffer_dmat, 0, &cm->cm_dmamap) == 0) if (i <= sc->facts->HighPriorityCredit) mps_free_high_priority_command(sc, cm); else mps_free_command(sc, cm); else { panic("failed to allocate command %d\n", i); sc->num_reqs = i; break; } } return (0); } static int mps_init_queues(struct mps_softc *sc) { int i; memset((uint8_t *)sc->post_queue, 0xff, sc->pqdepth * 8); /* * According to the spec, we need to use one less reply than we * have space for on the queue. So sc->num_replies (the number we * use) should be less than sc->fqdepth (allocated size). */ if (sc->num_replies >= sc->fqdepth) return (EINVAL); /* * Initialize all of the free queue entries. */ for (i = 0; i < sc->fqdepth; i++) sc->free_queue[i] = sc->reply_busaddr + (i * sc->facts->ReplyFrameSize * 4); sc->replyfreeindex = sc->num_replies; return (0); } /* Get the driver parameter tunables. Lowest priority are the driver defaults. * Next are the global settings, if they exist. Highest are the per-unit * settings, if they exist. */ static void mps_get_tunables(struct mps_softc *sc) { char tmpstr[80]; /* XXX default to some debugging for now */ sc->mps_debug = MPS_INFO|MPS_FAULT; sc->disable_msix = 0; sc->disable_msi = 0; sc->max_chains = MPS_CHAIN_FRAMES; /* * Grab the global variables. */ TUNABLE_INT_FETCH("hw.mps.debug_level", &sc->mps_debug); TUNABLE_INT_FETCH("hw.mps.disable_msix", &sc->disable_msix); TUNABLE_INT_FETCH("hw.mps.disable_msi", &sc->disable_msi); TUNABLE_INT_FETCH("hw.mps.max_chains", &sc->max_chains); /* Grab the unit-instance variables */ snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.debug_level", device_get_unit(sc->mps_dev)); TUNABLE_INT_FETCH(tmpstr, &sc->mps_debug); snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.disable_msix", device_get_unit(sc->mps_dev)); TUNABLE_INT_FETCH(tmpstr, &sc->disable_msix); snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.disable_msi", device_get_unit(sc->mps_dev)); TUNABLE_INT_FETCH(tmpstr, &sc->disable_msi); snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.max_chains", device_get_unit(sc->mps_dev)); TUNABLE_INT_FETCH(tmpstr, &sc->max_chains); bzero(sc->exclude_ids, sizeof(sc->exclude_ids)); snprintf(tmpstr, sizeof(tmpstr), "dev.mps.%d.exclude_ids", device_get_unit(sc->mps_dev)); TUNABLE_STR_FETCH(tmpstr, sc->exclude_ids, sizeof(sc->exclude_ids)); } static void mps_setup_sysctl(struct mps_softc *sc) { struct sysctl_ctx_list *sysctl_ctx = NULL; struct sysctl_oid *sysctl_tree = NULL; char tmpstr[80], tmpstr2[80]; /* * Setup the sysctl variable so the user can change the debug level * on the fly. */ snprintf(tmpstr, sizeof(tmpstr), "MPS controller %d", device_get_unit(sc->mps_dev)); snprintf(tmpstr2, sizeof(tmpstr2), "%d", device_get_unit(sc->mps_dev)); sysctl_ctx = device_get_sysctl_ctx(sc->mps_dev); if (sysctl_ctx != NULL) sysctl_tree = device_get_sysctl_tree(sc->mps_dev); if (sysctl_tree == NULL) { sysctl_ctx_init(&sc->sysctl_ctx); sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx, SYSCTL_STATIC_CHILDREN(_hw_mps), OID_AUTO, tmpstr2, CTLFLAG_RD, 0, tmpstr); if (sc->sysctl_tree == NULL) return; sysctl_ctx = &sc->sysctl_ctx; sysctl_tree = sc->sysctl_tree; } SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "debug_level", CTLFLAG_RW, &sc->mps_debug, 0, "mps debug level"); SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "disable_msix", CTLFLAG_RD, &sc->disable_msix, 0, "Disable the use of MSI-X interrupts"); SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "disable_msi", CTLFLAG_RD, &sc->disable_msi, 0, "Disable the use of MSI interrupts"); SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "firmware_version", CTLFLAG_RW, sc->fw_version, strlen(sc->fw_version), "firmware version"); SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "driver_version", CTLFLAG_RW, MPS_DRIVER_VERSION, strlen(MPS_DRIVER_VERSION), "driver version"); SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "io_cmds_active", CTLFLAG_RD, &sc->io_cmds_active, 0, "number of currently active commands"); SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "io_cmds_highwater", CTLFLAG_RD, &sc->io_cmds_highwater, 0, "maximum active commands seen"); SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "chain_free", CTLFLAG_RD, &sc->chain_free, 0, "number of free chain elements"); SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "chain_free_lowwater", CTLFLAG_RD, &sc->chain_free_lowwater, 0,"lowest number of free chain elements"); SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "max_chains", CTLFLAG_RD, &sc->max_chains, 0,"maximum chain frames that will be allocated"); #if __FreeBSD_version >= 900030 SYSCTL_ADD_UQUAD(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "chain_alloc_fail", CTLFLAG_RD, &sc->chain_alloc_fail, "chain allocation failures"); #endif //FreeBSD_version >= 900030 } int mps_attach(struct mps_softc *sc) { int error; mps_get_tunables(sc); MPS_FUNCTRACE(sc); mtx_init(&sc->mps_mtx, "MPT2SAS lock", NULL, MTX_DEF); callout_init_mtx(&sc->periodic, &sc->mps_mtx, 0); TAILQ_INIT(&sc->event_list); timevalclear(&sc->lastfail); if ((error = mps_transition_ready(sc)) != 0) { mps_printf(sc, "%s failed to transition ready\n", __func__); return (error); } sc->facts = malloc(sizeof(MPI2_IOC_FACTS_REPLY), M_MPT2, M_ZERO|M_NOWAIT); if(!sc->facts) { device_printf(sc->mps_dev, "Cannot allocate memory %s %d\n", __func__, __LINE__); return (ENOMEM); } /* * Get IOC Facts and allocate all structures based on this information. * A Diag Reset will also call mps_iocfacts_allocate and re-read the IOC * Facts. If relevant values have changed in IOC Facts, this function * will free all of the memory based on IOC Facts and reallocate that * memory. If this fails, any allocated memory should already be freed. */ if ((error = mps_iocfacts_allocate(sc, TRUE)) != 0) { mps_dprint(sc, MPS_FAULT, "%s IOC Facts based allocation " "failed with error %d\n", __func__, error); return (error); } /* Start the periodic watchdog check on the IOC Doorbell */ mps_periodic(sc); /* * The portenable will kick off discovery events that will drive the * rest of the initialization process. The CAM/SAS module will * hold up the boot sequence until discovery is complete. */ sc->mps_ich.ich_func = mps_startup; sc->mps_ich.ich_arg = sc; if (config_intrhook_establish(&sc->mps_ich) != 0) { mps_dprint(sc, MPS_ERROR, "Cannot establish MPS config hook\n"); error = EINVAL; } /* * Allow IR to shutdown gracefully when shutdown occurs. */ sc->shutdown_eh = EVENTHANDLER_REGISTER(shutdown_final, mpssas_ir_shutdown, sc, SHUTDOWN_PRI_DEFAULT); if (sc->shutdown_eh == NULL) mps_dprint(sc, MPS_ERROR, "shutdown event registration " "failed\n"); mps_setup_sysctl(sc); sc->mps_flags |= MPS_FLAGS_ATTACH_DONE; return (error); } /* Run through any late-start handlers. */ static void mps_startup(void *arg) { struct mps_softc *sc; sc = (struct mps_softc *)arg; mps_lock(sc); mps_unmask_intr(sc); /* initialize device mapping tables */ mps_base_static_config_pages(sc); mps_mapping_initialize(sc); mpssas_startup(sc); mps_unlock(sc); } /* Periodic watchdog. Is called with the driver lock already held. */ static void mps_periodic(void *arg) { struct mps_softc *sc; uint32_t db; sc = (struct mps_softc *)arg; if (sc->mps_flags & MPS_FLAGS_SHUTDOWN) return; db = mps_regread(sc, MPI2_DOORBELL_OFFSET); if ((db & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { mps_dprint(sc, MPS_FAULT, "IOC Fault 0x%08x, Resetting\n", db); mps_reinit(sc); } callout_reset(&sc->periodic, MPS_PERIODIC_DELAY * hz, mps_periodic, sc); } static void mps_log_evt_handler(struct mps_softc *sc, uintptr_t data, MPI2_EVENT_NOTIFICATION_REPLY *event) { MPI2_EVENT_DATA_LOG_ENTRY_ADDED *entry; mps_print_event(sc, event); switch (event->Event) { case MPI2_EVENT_LOG_DATA: mps_dprint(sc, MPS_EVENT, "MPI2_EVENT_LOG_DATA:\n"); if (sc->mps_debug & MPS_EVENT) hexdump(event->EventData, event->EventDataLength, NULL, 0); break; case MPI2_EVENT_LOG_ENTRY_ADDED: entry = (MPI2_EVENT_DATA_LOG_ENTRY_ADDED *)event->EventData; mps_dprint(sc, MPS_EVENT, "MPI2_EVENT_LOG_ENTRY_ADDED event " "0x%x Sequence %d:\n", entry->LogEntryQualifier, entry->LogSequence); break; default: break; } return; } static int mps_attach_log(struct mps_softc *sc) { u32 events[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS]; bzero(events, 16); setbit(events, MPI2_EVENT_LOG_DATA); setbit(events, MPI2_EVENT_LOG_ENTRY_ADDED); mps_register_events(sc, events, mps_log_evt_handler, NULL, &sc->mps_log_eh); return (0); } static int mps_detach_log(struct mps_softc *sc) { if (sc->mps_log_eh != NULL) mps_deregister_events(sc, sc->mps_log_eh); return (0); } /* * Free all of the driver resources and detach submodules. Should be called * without the lock held. */ int mps_free(struct mps_softc *sc) { int error; /* Turn off the watchdog */ mps_lock(sc); sc->mps_flags |= MPS_FLAGS_SHUTDOWN; mps_unlock(sc); /* Lock must not be held for this */ callout_drain(&sc->periodic); if (((error = mps_detach_log(sc)) != 0) || ((error = mps_detach_sas(sc)) != 0)) return (error); mps_detach_user(sc); /* Put the IOC back in the READY state. */ mps_lock(sc); if ((error = mps_transition_ready(sc)) != 0) { mps_unlock(sc); return (error); } mps_unlock(sc); if (sc->facts != NULL) free(sc->facts, M_MPT2); /* * Free all buffers that are based on IOC Facts. A Diag Reset may need * to free these buffers too. */ mps_iocfacts_free(sc); if (sc->sysctl_tree != NULL) sysctl_ctx_free(&sc->sysctl_ctx); /* Deregister the shutdown function */ if (sc->shutdown_eh != NULL) EVENTHANDLER_DEREGISTER(shutdown_final, sc->shutdown_eh); mtx_destroy(&sc->mps_mtx); return (0); } static __inline void mps_complete_command(struct mps_softc *sc, struct mps_command *cm) { MPS_FUNCTRACE(sc); if (cm == NULL) { mps_dprint(sc, MPS_ERROR, "Completing NULL command\n"); return; } if (cm->cm_flags & MPS_CM_FLAGS_POLLED) cm->cm_flags |= MPS_CM_FLAGS_COMPLETE; if (cm->cm_complete != NULL) { mps_dprint(sc, MPS_TRACE, "%s cm %p calling cm_complete %p data %p reply %p\n", __func__, cm, cm->cm_complete, cm->cm_complete_data, cm->cm_reply); cm->cm_complete(sc, cm); } if (cm->cm_flags & MPS_CM_FLAGS_WAKEUP) { mps_dprint(sc, MPS_TRACE, "waking up %p\n", cm); wakeup(cm); } if (cm->cm_sc->io_cmds_active != 0) { cm->cm_sc->io_cmds_active--; } else { mps_dprint(sc, MPS_ERROR, "Warning: io_cmds_active is " "out of sync - resynching to 0\n"); } } static void mps_sas_log_info(struct mps_softc *sc , u32 log_info) { union loginfo_type { u32 loginfo; struct { u32 subcode:16; u32 code:8; u32 originator:4; u32 bus_type:4; } dw; }; union loginfo_type sas_loginfo; char *originator_str = NULL; sas_loginfo.loginfo = log_info; if (sas_loginfo.dw.bus_type != 3 /*SAS*/) return; /* each nexus loss loginfo */ if (log_info == 0x31170000) return; /* eat the loginfos associated with task aborts */ if ((log_info == 30050000 || log_info == 0x31140000 || log_info == 0x31130000)) return; switch (sas_loginfo.dw.originator) { case 0: originator_str = "IOP"; break; case 1: originator_str = "PL"; break; case 2: originator_str = "IR"; break; } mps_dprint(sc, MPS_LOG, "log_info(0x%08x): originator(%s), " "code(0x%02x), sub_code(0x%04x)\n", log_info, originator_str, sas_loginfo.dw.code, sas_loginfo.dw.subcode); } static void mps_display_reply_info(struct mps_softc *sc, uint8_t *reply) { MPI2DefaultReply_t *mpi_reply; u16 sc_status; mpi_reply = (MPI2DefaultReply_t*)reply; sc_status = le16toh(mpi_reply->IOCStatus); if (sc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) mps_sas_log_info(sc, le32toh(mpi_reply->IOCLogInfo)); } void mps_intr(void *data) { struct mps_softc *sc; uint32_t status; sc = (struct mps_softc *)data; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); /* * Check interrupt status register to flush the bus. This is * needed for both INTx interrupts and driver-driven polling */ status = mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET); if ((status & MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT) == 0) return; mps_lock(sc); mps_intr_locked(data); mps_unlock(sc); return; } /* * In theory, MSI/MSIX interrupts shouldn't need to read any registers on the * chip. Hopefully this theory is correct. */ void mps_intr_msi(void *data) { struct mps_softc *sc; sc = (struct mps_softc *)data; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); mps_lock(sc); mps_intr_locked(data); mps_unlock(sc); return; } /* * The locking is overly broad and simplistic, but easy to deal with for now. */ void mps_intr_locked(void *data) { MPI2_REPLY_DESCRIPTORS_UNION *desc; struct mps_softc *sc; struct mps_command *cm = NULL; uint8_t flags; u_int pq; MPI2_DIAG_RELEASE_REPLY *rel_rep; mps_fw_diagnostic_buffer_t *pBuffer; sc = (struct mps_softc *)data; pq = sc->replypostindex; mps_dprint(sc, MPS_TRACE, "%s sc %p starting with replypostindex %u\n", __func__, sc, sc->replypostindex); for ( ;; ) { cm = NULL; desc = &sc->post_queue[sc->replypostindex]; flags = desc->Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; if ((flags == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) || (le32toh(desc->Words.High) == 0xffffffff)) break; /* increment the replypostindex now, so that event handlers * and cm completion handlers which decide to do a diag * reset can zero it without it getting incremented again * afterwards, and we break out of this loop on the next * iteration since the reply post queue has been cleared to * 0xFF and all descriptors look unused (which they are). */ if (++sc->replypostindex >= sc->pqdepth) sc->replypostindex = 0; switch (flags) { case MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS: cm = &sc->commands[le16toh(desc->SCSIIOSuccess.SMID)]; cm->cm_reply = NULL; break; case MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY: { uint32_t baddr; uint8_t *reply; /* * Re-compose the reply address from the address * sent back from the chip. The ReplyFrameAddress * is the lower 32 bits of the physical address of * particular reply frame. Convert that address to * host format, and then use that to provide the * offset against the virtual address base * (sc->reply_frames). */ baddr = le32toh(desc->AddressReply.ReplyFrameAddress); reply = sc->reply_frames + (baddr - ((uint32_t)sc->reply_busaddr)); /* * Make sure the reply we got back is in a valid * range. If not, go ahead and panic here, since * we'll probably panic as soon as we deference the * reply pointer anyway. */ if ((reply < sc->reply_frames) || (reply > (sc->reply_frames + (sc->fqdepth * sc->facts->ReplyFrameSize * 4)))) { printf("%s: WARNING: reply %p out of range!\n", __func__, reply); printf("%s: reply_frames %p, fqdepth %d, " "frame size %d\n", __func__, sc->reply_frames, sc->fqdepth, sc->facts->ReplyFrameSize * 4); printf("%s: baddr %#x,\n", __func__, baddr); /* LSI-TODO. See Linux Code. Need Gracefull exit*/ panic("Reply address out of range"); } if (le16toh(desc->AddressReply.SMID) == 0) { if (((MPI2_DEFAULT_REPLY *)reply)->Function == MPI2_FUNCTION_DIAG_BUFFER_POST) { /* * If SMID is 0 for Diag Buffer Post, * this implies that the reply is due to * a release function with a status that * the buffer has been released. Set * the buffer flags accordingly. */ rel_rep = (MPI2_DIAG_RELEASE_REPLY *)reply; if (le16toh(rel_rep->IOCStatus) == MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED) { pBuffer = &sc->fw_diag_buffer_list[ rel_rep->BufferType]; pBuffer->valid_data = TRUE; pBuffer->owned_by_firmware = FALSE; pBuffer->immediate = FALSE; } } else mps_dispatch_event(sc, baddr, (MPI2_EVENT_NOTIFICATION_REPLY *) reply); } else { cm = &sc->commands[le16toh(desc->AddressReply.SMID)]; cm->cm_reply = reply; cm->cm_reply_data = le32toh(desc->AddressReply.ReplyFrameAddress); } break; } case MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS: case MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER: case MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS: default: /* Unhandled */ mps_dprint(sc, MPS_ERROR, "Unhandled reply 0x%x\n", desc->Default.ReplyFlags); cm = NULL; break; } if (cm != NULL) { // Print Error reply frame if (cm->cm_reply) mps_display_reply_info(sc,cm->cm_reply); mps_complete_command(sc, cm); } desc->Words.Low = 0xffffffff; desc->Words.High = 0xffffffff; } if (pq != sc->replypostindex) { mps_dprint(sc, MPS_TRACE, "%s sc %p writing postindex %d\n", __func__, sc, sc->replypostindex); mps_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, sc->replypostindex); } return; } static void mps_dispatch_event(struct mps_softc *sc, uintptr_t data, MPI2_EVENT_NOTIFICATION_REPLY *reply) { struct mps_event_handle *eh; int event, handled = 0; event = le16toh(reply->Event); TAILQ_FOREACH(eh, &sc->event_list, eh_list) { if (isset(eh->mask, event)) { eh->callback(sc, data, reply); handled++; } } if (handled == 0) mps_dprint(sc, MPS_EVENT, "Unhandled event 0x%x\n", le16toh(event)); /* * This is the only place that the event/reply should be freed. * Anything wanting to hold onto the event data should have * already copied it into their own storage. */ mps_free_reply(sc, data); } static void mps_reregister_events_complete(struct mps_softc *sc, struct mps_command *cm) { mps_dprint(sc, MPS_TRACE, "%s\n", __func__); if (cm->cm_reply) mps_print_event(sc, (MPI2_EVENT_NOTIFICATION_REPLY *)cm->cm_reply); mps_free_command(sc, cm); /* next, send a port enable */ mpssas_startup(sc); } /* * For both register_events and update_events, the caller supplies a bitmap * of events that it _wants_. These functions then turn that into a bitmask * suitable for the controller. */ int mps_register_events(struct mps_softc *sc, u32 *mask, mps_evt_callback_t *cb, void *data, struct mps_event_handle **handle) { struct mps_event_handle *eh; int error = 0; eh = malloc(sizeof(struct mps_event_handle), M_MPT2, M_WAITOK|M_ZERO); if(!eh) { device_printf(sc->mps_dev, "Cannot allocate memory %s %d\n", __func__, __LINE__); return (ENOMEM); } eh->callback = cb; eh->data = data; TAILQ_INSERT_TAIL(&sc->event_list, eh, eh_list); if (mask != NULL) error = mps_update_events(sc, eh, mask); *handle = eh; return (error); } int mps_update_events(struct mps_softc *sc, struct mps_event_handle *handle, u32 *mask) { MPI2_EVENT_NOTIFICATION_REQUEST *evtreq; MPI2_EVENT_NOTIFICATION_REPLY *reply; struct mps_command *cm; int error, i; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); if ((mask != NULL) && (handle != NULL)) bcopy(mask, &handle->mask[0], sizeof(u32) * MPI2_EVENT_NOTIFY_EVENTMASK_WORDS); for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) sc->event_mask[i] = -1; for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) sc->event_mask[i] &= ~handle->mask[i]; if ((cm = mps_alloc_command(sc)) == NULL) return (EBUSY); evtreq = (MPI2_EVENT_NOTIFICATION_REQUEST *)cm->cm_req; evtreq->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; evtreq->MsgFlags = 0; evtreq->SASBroadcastPrimitiveMasks = 0; #ifdef MPS_DEBUG_ALL_EVENTS { u_char fullmask[16]; memset(fullmask, 0x00, 16); bcopy(fullmask, &evtreq->EventMasks[0], sizeof(u32) * MPI2_EVENT_NOTIFY_EVENTMASK_WORDS); } #else for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) evtreq->EventMasks[i] = htole32(sc->event_mask[i]); #endif cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_data = NULL; error = mps_request_polled(sc, cm); reply = (MPI2_EVENT_NOTIFICATION_REPLY *)cm->cm_reply; if ((reply == NULL) || (reply->IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS) error = ENXIO; mps_print_event(sc, reply); mps_dprint(sc, MPS_TRACE, "%s finished error %d\n", __func__, error); mps_free_command(sc, cm); return (error); } static int mps_reregister_events(struct mps_softc *sc) { MPI2_EVENT_NOTIFICATION_REQUEST *evtreq; struct mps_command *cm; struct mps_event_handle *eh; int error, i; mps_dprint(sc, MPS_TRACE, "%s\n", __func__); /* first, reregister events */ for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) sc->event_mask[i] = -1; TAILQ_FOREACH(eh, &sc->event_list, eh_list) { for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) sc->event_mask[i] &= ~eh->mask[i]; } if ((cm = mps_alloc_command(sc)) == NULL) return (EBUSY); evtreq = (MPI2_EVENT_NOTIFICATION_REQUEST *)cm->cm_req; evtreq->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; evtreq->MsgFlags = 0; evtreq->SASBroadcastPrimitiveMasks = 0; #ifdef MPS_DEBUG_ALL_EVENTS { u_char fullmask[16]; memset(fullmask, 0x00, 16); bcopy(fullmask, &evtreq->EventMasks[0], sizeof(u32) * MPI2_EVENT_NOTIFY_EVENTMASK_WORDS); } #else for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) evtreq->EventMasks[i] = htole32(sc->event_mask[i]); #endif cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_data = NULL; cm->cm_complete = mps_reregister_events_complete; error = mps_map_command(sc, cm); mps_dprint(sc, MPS_TRACE, "%s finished with error %d\n", __func__, error); return (error); } void mps_deregister_events(struct mps_softc *sc, struct mps_event_handle *handle) { TAILQ_REMOVE(&sc->event_list, handle, eh_list); free(handle, M_MPT2); } /* * Add a chain element as the next SGE for the specified command. * Reset cm_sge and cm_sgesize to indicate all the available space. */ static int mps_add_chain(struct mps_command *cm) { MPI2_SGE_CHAIN32 *sgc; struct mps_chain *chain; int space; if (cm->cm_sglsize < MPS_SGC_SIZE) panic("MPS: Need SGE Error Code\n"); chain = mps_alloc_chain(cm->cm_sc); if (chain == NULL) return (ENOBUFS); space = (int)cm->cm_sc->facts->IOCRequestFrameSize * 4; /* * Note: a double-linked list is used to make it easier to * walk for debugging. */ TAILQ_INSERT_TAIL(&cm->cm_chain_list, chain, chain_link); sgc = (MPI2_SGE_CHAIN32 *)&cm->cm_sge->MpiChain; sgc->Length = htole16(space); sgc->NextChainOffset = 0; /* TODO Looks like bug in Setting sgc->Flags. * sgc->Flags = ( MPI2_SGE_FLAGS_CHAIN_ELEMENT | MPI2_SGE_FLAGS_64_BIT_ADDRESSING | * MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT * This is fine.. because we are not using simple element. In case of * MPI2_SGE_CHAIN32, we have seperate Length and Flags feild. */ sgc->Flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT; sgc->Address = htole32(chain->chain_busaddr); cm->cm_sge = (MPI2_SGE_IO_UNION *)&chain->chain->MpiSimple; cm->cm_sglsize = space; return (0); } /* * Add one scatter-gather element (chain, simple, transaction context) * to the scatter-gather list for a command. Maintain cm_sglsize and * cm_sge as the remaining size and pointer to the next SGE to fill * in, respectively. */ int mps_push_sge(struct mps_command *cm, void *sgep, size_t len, int segsleft) { MPI2_SGE_TRANSACTION_UNION *tc = sgep; MPI2_SGE_SIMPLE64 *sge = sgep; int error, type; uint32_t saved_buf_len, saved_address_low, saved_address_high; type = (tc->Flags & MPI2_SGE_FLAGS_ELEMENT_MASK); #ifdef INVARIANTS switch (type) { case MPI2_SGE_FLAGS_TRANSACTION_ELEMENT: { if (len != tc->DetailsLength + 4) panic("TC %p length %u or %zu?", tc, tc->DetailsLength + 4, len); } break; case MPI2_SGE_FLAGS_CHAIN_ELEMENT: /* Driver only uses 32-bit chain elements */ if (len != MPS_SGC_SIZE) panic("CHAIN %p length %u or %zu?", sgep, MPS_SGC_SIZE, len); break; case MPI2_SGE_FLAGS_SIMPLE_ELEMENT: /* Driver only uses 64-bit SGE simple elements */ if (len != MPS_SGE64_SIZE) panic("SGE simple %p length %u or %zu?", sge, MPS_SGE64_SIZE, len); if (((le32toh(sge->FlagsLength) >> MPI2_SGE_FLAGS_SHIFT) & MPI2_SGE_FLAGS_ADDRESS_SIZE) == 0) panic("SGE simple %p not marked 64-bit?", sge); break; default: panic("Unexpected SGE %p, flags %02x", tc, tc->Flags); } #endif /* * case 1: 1 more segment, enough room for it * case 2: 2 more segments, enough room for both * case 3: >=2 more segments, only enough room for 1 and a chain * case 4: >=1 more segment, enough room for only a chain * case 5: >=1 more segment, no room for anything (error) */ /* * There should be room for at least a chain element, or this * code is buggy. Case (5). */ if (cm->cm_sglsize < MPS_SGC_SIZE) panic("MPS: Need SGE Error Code\n"); if (segsleft >= 2 && cm->cm_sglsize < len + MPS_SGC_SIZE + MPS_SGE64_SIZE) { /* * There are 2 or more segments left to add, and only * enough room for 1 and a chain. Case (3). * * Mark as last element in this chain if necessary. */ if (type == MPI2_SGE_FLAGS_SIMPLE_ELEMENT) { sge->FlagsLength |= htole32( MPI2_SGE_FLAGS_LAST_ELEMENT << MPI2_SGE_FLAGS_SHIFT); } /* * Add the item then a chain. Do the chain now, * rather than on the next iteration, to simplify * understanding the code. */ cm->cm_sglsize -= len; bcopy(sgep, cm->cm_sge, len); cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len); return (mps_add_chain(cm)); } if (segsleft >= 1 && cm->cm_sglsize < len + MPS_SGC_SIZE) { /* * 1 or more segment, enough room for only a chain. * Hope the previous element wasn't a Simple entry * that needed to be marked with * MPI2_SGE_FLAGS_LAST_ELEMENT. Case (4). */ if ((error = mps_add_chain(cm)) != 0) return (error); } #ifdef INVARIANTS /* Case 1: 1 more segment, enough room for it. */ if (segsleft == 1 && cm->cm_sglsize < len) panic("1 seg left and no room? %u versus %zu", cm->cm_sglsize, len); /* Case 2: 2 more segments, enough room for both */ if (segsleft == 2 && cm->cm_sglsize < len + MPS_SGE64_SIZE) panic("2 segs left and no room? %u versus %zu", cm->cm_sglsize, len); #endif if (segsleft == 1 && type == MPI2_SGE_FLAGS_SIMPLE_ELEMENT) { /* * If this is a bi-directional request, need to account for that * here. Save the pre-filled sge values. These will be used * either for the 2nd SGL or for a single direction SGL. If * cm_out_len is non-zero, this is a bi-directional request, so * fill in the OUT SGL first, then the IN SGL, otherwise just * fill in the IN SGL. Note that at this time, when filling in * 2 SGL's for a bi-directional request, they both use the same * DMA buffer (same cm command). */ saved_buf_len = le32toh(sge->FlagsLength) & 0x00FFFFFF; saved_address_low = sge->Address.Low; saved_address_high = sge->Address.High; if (cm->cm_out_len) { sge->FlagsLength = htole32(cm->cm_out_len | ((uint32_t)(MPI2_SGE_FLAGS_SIMPLE_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC | MPI2_SGE_FLAGS_64_BIT_ADDRESSING) << MPI2_SGE_FLAGS_SHIFT)); cm->cm_sglsize -= len; bcopy(sgep, cm->cm_sge, len); cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len); } saved_buf_len |= ((uint32_t)(MPI2_SGE_FLAGS_SIMPLE_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_64_BIT_ADDRESSING) << MPI2_SGE_FLAGS_SHIFT); if (cm->cm_flags & MPS_CM_FLAGS_DATAIN) { saved_buf_len |= ((uint32_t)(MPI2_SGE_FLAGS_IOC_TO_HOST) << MPI2_SGE_FLAGS_SHIFT); } else { saved_buf_len |= ((uint32_t)(MPI2_SGE_FLAGS_HOST_TO_IOC) << MPI2_SGE_FLAGS_SHIFT); } sge->FlagsLength = htole32(saved_buf_len); sge->Address.Low = saved_address_low; sge->Address.High = saved_address_high; } cm->cm_sglsize -= len; bcopy(sgep, cm->cm_sge, len); cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len); return (0); } /* * Add one dma segment to the scatter-gather list for a command. */ int mps_add_dmaseg(struct mps_command *cm, vm_paddr_t pa, size_t len, u_int flags, int segsleft) { MPI2_SGE_SIMPLE64 sge; /* * This driver always uses 64-bit address elements for simplicity. */ bzero(&sge, sizeof(sge)); flags |= MPI2_SGE_FLAGS_SIMPLE_ELEMENT | MPI2_SGE_FLAGS_64_BIT_ADDRESSING; sge.FlagsLength = htole32(len | (flags << MPI2_SGE_FLAGS_SHIFT)); mps_from_u64(pa, &sge.Address); return (mps_push_sge(cm, &sge, sizeof sge, segsleft)); } static void mps_data_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) { struct mps_softc *sc; struct mps_command *cm; u_int i, dir, sflags; cm = (struct mps_command *)arg; sc = cm->cm_sc; /* * In this case, just print out a warning and let the chip tell the * user they did the wrong thing. */ if ((cm->cm_max_segs != 0) && (nsegs > cm->cm_max_segs)) { mps_dprint(sc, MPS_ERROR, "%s: warning: busdma returned %d segments, " "more than the %d allowed\n", __func__, nsegs, cm->cm_max_segs); } /* * Set up DMA direction flags. Bi-directional requests are also handled * here. In that case, both direction flags will be set. */ sflags = 0; if (cm->cm_flags & MPS_CM_FLAGS_SMP_PASS) { /* * We have to add a special case for SMP passthrough, there * is no easy way to generically handle it. The first * S/G element is used for the command (therefore the * direction bit needs to be set). The second one is used * for the reply. We'll leave it to the caller to make * sure we only have two buffers. */ /* * Even though the busdma man page says it doesn't make * sense to have both direction flags, it does in this case. * We have one s/g element being accessed in each direction. */ dir = BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD; /* * Set the direction flag on the first buffer in the SMP * passthrough request. We'll clear it for the second one. */ sflags |= MPI2_SGE_FLAGS_DIRECTION | MPI2_SGE_FLAGS_END_OF_BUFFER; } else if (cm->cm_flags & MPS_CM_FLAGS_DATAOUT) { sflags |= MPI2_SGE_FLAGS_HOST_TO_IOC; dir = BUS_DMASYNC_PREWRITE; } else dir = BUS_DMASYNC_PREREAD; for (i = 0; i < nsegs; i++) { if ((cm->cm_flags & MPS_CM_FLAGS_SMP_PASS) && (i != 0)) { sflags &= ~MPI2_SGE_FLAGS_DIRECTION; } error = mps_add_dmaseg(cm, segs[i].ds_addr, segs[i].ds_len, sflags, nsegs - i); if (error != 0) { /* Resource shortage, roll back! */ if (ratecheck(&sc->lastfail, &mps_chainfail_interval)) mps_dprint(sc, MPS_INFO, "Out of chain frames, " "consider increasing hw.mps.max_chains.\n"); cm->cm_flags |= MPS_CM_FLAGS_CHAIN_FAILED; mps_complete_command(sc, cm); return; } } bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir); mps_enqueue_request(sc, cm); return; } static void mps_data_cb2(void *arg, bus_dma_segment_t *segs, int nsegs, bus_size_t mapsize, int error) { mps_data_cb(arg, segs, nsegs, error); } /* * This is the routine to enqueue commands ansynchronously. * Note that the only error path here is from bus_dmamap_load(), which can * return EINPROGRESS if it is waiting for resources. Other than this, it's * assumed that if you have a command in-hand, then you have enough credits * to use it. */ int mps_map_command(struct mps_softc *sc, struct mps_command *cm) { int error = 0; if (cm->cm_flags & MPS_CM_FLAGS_USE_UIO) { error = bus_dmamap_load_uio(sc->buffer_dmat, cm->cm_dmamap, &cm->cm_uio, mps_data_cb2, cm, 0); } else if (cm->cm_flags & MPS_CM_FLAGS_USE_CCB) { error = bus_dmamap_load_ccb(sc->buffer_dmat, cm->cm_dmamap, cm->cm_data, mps_data_cb, cm, 0); } else if ((cm->cm_data != NULL) && (cm->cm_length != 0)) { error = bus_dmamap_load(sc->buffer_dmat, cm->cm_dmamap, cm->cm_data, cm->cm_length, mps_data_cb, cm, 0); } else { /* Add a zero-length element as needed */ if (cm->cm_sge != NULL) mps_add_dmaseg(cm, 0, 0, 0, 1); mps_enqueue_request(sc, cm); } return (error); } /* * This is the routine to enqueue commands synchronously. An error of * EINPROGRESS from mps_map_command() is ignored since the command will * be executed and enqueued automatically. Other errors come from msleep(). */ int mps_wait_command(struct mps_softc *sc, struct mps_command *cm, int timeout, int sleep_flag) { int error, rc; struct timeval cur_time, start_time; if (sc->mps_flags & MPS_FLAGS_DIAGRESET) return EBUSY; cm->cm_complete = NULL; cm->cm_flags |= (MPS_CM_FLAGS_WAKEUP + MPS_CM_FLAGS_POLLED); error = mps_map_command(sc, cm); if ((error != 0) && (error != EINPROGRESS)) return (error); // Check for context and wait for 50 mSec at a time until time has // expired or the command has finished. If msleep can't be used, need // to poll. if (curthread->td_no_sleeping != 0) sleep_flag = NO_SLEEP; getmicrotime(&start_time); if (mtx_owned(&sc->mps_mtx) && sleep_flag == CAN_SLEEP) { error = msleep(cm, &sc->mps_mtx, 0, "mpswait", timeout*hz); } else { while ((cm->cm_flags & MPS_CM_FLAGS_COMPLETE) == 0) { mps_intr_locked(sc); if (sleep_flag == CAN_SLEEP) pause("mpswait", hz/20); else DELAY(50000); getmicrotime(&cur_time); if ((cur_time.tv_sec - start_time.tv_sec) > timeout) { error = EWOULDBLOCK; break; } } } if (error == EWOULDBLOCK) { mps_dprint(sc, MPS_FAULT, "Calling Reinit from %s\n", __func__); rc = mps_reinit(sc); mps_dprint(sc, MPS_FAULT, "Reinit %s\n", (rc == 0) ? "success" : "failed"); error = ETIMEDOUT; } return (error); } /* * This is the routine to enqueue a command synchonously and poll for * completion. Its use should be rare. */ int mps_request_polled(struct mps_softc *sc, struct mps_command *cm) { int error, timeout = 0, rc; struct timeval cur_time, start_time; error = 0; cm->cm_flags |= MPS_CM_FLAGS_POLLED; cm->cm_complete = NULL; mps_map_command(sc, cm); getmicrotime(&start_time); while ((cm->cm_flags & MPS_CM_FLAGS_COMPLETE) == 0) { mps_intr_locked(sc); if (mtx_owned(&sc->mps_mtx)) msleep(&sc->msleep_fake_chan, &sc->mps_mtx, 0, "mpspoll", hz/20); else pause("mpsdiag", hz/20); /* * Check for real-time timeout and fail if more than 60 seconds. */ getmicrotime(&cur_time); timeout = cur_time.tv_sec - start_time.tv_sec; if (timeout > 60) { mps_dprint(sc, MPS_FAULT, "polling failed\n"); error = ETIMEDOUT; break; } } if (error) { mps_dprint(sc, MPS_FAULT, "Calling Reinit from %s\n", __func__); rc = mps_reinit(sc); mps_dprint(sc, MPS_FAULT, "Reinit %s\n", (rc == 0) ? "success" : "failed"); } return (error); } /* * The MPT driver had a verbose interface for config pages. In this driver, * reduce it to much simplier terms, similar to the Linux driver. */ int mps_read_config_page(struct mps_softc *sc, struct mps_config_params *params) { MPI2_CONFIG_REQUEST *req; struct mps_command *cm; int error; if (sc->mps_flags & MPS_FLAGS_BUSY) { return (EBUSY); } cm = mps_alloc_command(sc); if (cm == NULL) { return (EBUSY); } req = (MPI2_CONFIG_REQUEST *)cm->cm_req; req->Function = MPI2_FUNCTION_CONFIG; req->Action = params->action; req->SGLFlags = 0; req->ChainOffset = 0; req->PageAddress = params->page_address; if (params->hdr.Struct.PageType == MPI2_CONFIG_PAGETYPE_EXTENDED) { MPI2_CONFIG_EXTENDED_PAGE_HEADER *hdr; hdr = ¶ms->hdr.Ext; req->ExtPageType = hdr->ExtPageType; req->ExtPageLength = hdr->ExtPageLength; req->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; req->Header.PageLength = 0; /* Must be set to zero */ req->Header.PageNumber = hdr->PageNumber; req->Header.PageVersion = hdr->PageVersion; } else { MPI2_CONFIG_PAGE_HEADER *hdr; hdr = ¶ms->hdr.Struct; req->Header.PageType = hdr->PageType; req->Header.PageNumber = hdr->PageNumber; req->Header.PageLength = hdr->PageLength; req->Header.PageVersion = hdr->PageVersion; } cm->cm_data = params->buffer; cm->cm_length = params->length; - cm->cm_sge = &req->PageBufferSGE; - cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); - cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; + if (cm->cm_data != NULL) { + cm->cm_sge = &req->PageBufferSGE; + cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION); + cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN; + } else + cm->cm_sge = NULL; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_complete_data = params; if (params->callback != NULL) { cm->cm_complete = mps_config_complete; return (mps_map_command(sc, cm)); } else { error = mps_wait_command(sc, cm, 0, CAN_SLEEP); if (error) { mps_dprint(sc, MPS_FAULT, "Error %d reading config page\n", error); mps_free_command(sc, cm); return (error); } mps_config_complete(sc, cm); } return (0); } int mps_write_config_page(struct mps_softc *sc, struct mps_config_params *params) { return (EINVAL); } static void mps_config_complete(struct mps_softc *sc, struct mps_command *cm) { MPI2_CONFIG_REPLY *reply; struct mps_config_params *params; MPS_FUNCTRACE(sc); params = cm->cm_complete_data; if (cm->cm_data != NULL) { bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, BUS_DMASYNC_POSTREAD); bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap); } /* * XXX KDM need to do more error recovery? This results in the * device in question not getting probed. */ if ((cm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) { params->status = MPI2_IOCSTATUS_BUSY; goto done; } reply = (MPI2_CONFIG_REPLY *)cm->cm_reply; if (reply == NULL) { params->status = MPI2_IOCSTATUS_BUSY; goto done; } params->status = reply->IOCStatus; - if (params->hdr.Ext.ExtPageType != 0) { + if (params->hdr.Struct.PageType == MPI2_CONFIG_PAGETYPE_EXTENDED) { params->hdr.Ext.ExtPageType = reply->ExtPageType; params->hdr.Ext.ExtPageLength = reply->ExtPageLength; + params->hdr.Ext.PageType = reply->Header.PageType; + params->hdr.Ext.PageNumber = reply->Header.PageNumber; + params->hdr.Ext.PageVersion = reply->Header.PageVersion; } else { params->hdr.Struct.PageType = reply->Header.PageType; params->hdr.Struct.PageNumber = reply->Header.PageNumber; params->hdr.Struct.PageLength = reply->Header.PageLength; params->hdr.Struct.PageVersion = reply->Header.PageVersion; } done: mps_free_command(sc, cm); if (params->callback != NULL) params->callback(sc, params); return; } Index: head/sys/dev/mps/mps_user.c =================================================================== --- head/sys/dev/mps/mps_user.c (revision 277716) +++ head/sys/dev/mps/mps_user.c (revision 277717) @@ -1,2423 +1,2427 @@ /*- * Copyright (c) 2008 Yahoo!, Inc. * All rights reserved. * Written by: John Baldwin * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * LSI MPT-Fusion Host Adapter FreeBSD userland interface */ /*- * Copyright (c) 2011, 2012 LSI Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * LSI MPT-Fusion Host Adapter FreeBSD * * $FreeBSD$ */ #include __FBSDID("$FreeBSD$"); #include "opt_compat.h" /* TODO Move headers to mpsvar */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static d_open_t mps_open; static d_close_t mps_close; static d_ioctl_t mps_ioctl_devsw; static struct cdevsw mps_cdevsw = { .d_version = D_VERSION, .d_flags = 0, .d_open = mps_open, .d_close = mps_close, .d_ioctl = mps_ioctl_devsw, .d_name = "mps", }; typedef int (mps_user_f)(struct mps_command *, struct mps_usr_command *); static mps_user_f mpi_pre_ioc_facts; static mps_user_f mpi_pre_port_facts; static mps_user_f mpi_pre_fw_download; static mps_user_f mpi_pre_fw_upload; static mps_user_f mpi_pre_sata_passthrough; static mps_user_f mpi_pre_smp_passthrough; static mps_user_f mpi_pre_config; static mps_user_f mpi_pre_sas_io_unit_control; static int mps_user_read_cfg_header(struct mps_softc *, struct mps_cfg_page_req *); static int mps_user_read_cfg_page(struct mps_softc *, struct mps_cfg_page_req *, void *); static int mps_user_read_extcfg_header(struct mps_softc *, struct mps_ext_cfg_page_req *); static int mps_user_read_extcfg_page(struct mps_softc *, struct mps_ext_cfg_page_req *, void *); static int mps_user_write_cfg_page(struct mps_softc *, struct mps_cfg_page_req *, void *); static int mps_user_setup_request(struct mps_command *, struct mps_usr_command *); static int mps_user_command(struct mps_softc *, struct mps_usr_command *); static int mps_user_pass_thru(struct mps_softc *sc, mps_pass_thru_t *data); static void mps_user_get_adapter_data(struct mps_softc *sc, mps_adapter_data_t *data); static void mps_user_read_pci_info(struct mps_softc *sc, mps_pci_info_t *data); static uint8_t mps_get_fw_diag_buffer_number(struct mps_softc *sc, uint32_t unique_id); static int mps_post_fw_diag_buffer(struct mps_softc *sc, mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code); static int mps_release_fw_diag_buffer(struct mps_softc *sc, mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code, uint32_t diag_type); static int mps_diag_register(struct mps_softc *sc, mps_fw_diag_register_t *diag_register, uint32_t *return_code); static int mps_diag_unregister(struct mps_softc *sc, mps_fw_diag_unregister_t *diag_unregister, uint32_t *return_code); static int mps_diag_query(struct mps_softc *sc, mps_fw_diag_query_t *diag_query, uint32_t *return_code); static int mps_diag_read_buffer(struct mps_softc *sc, mps_diag_read_buffer_t *diag_read_buffer, uint8_t *ioctl_buf, uint32_t *return_code); static int mps_diag_release(struct mps_softc *sc, mps_fw_diag_release_t *diag_release, uint32_t *return_code); static int mps_do_diag_action(struct mps_softc *sc, uint32_t action, uint8_t *diag_action, uint32_t length, uint32_t *return_code); static int mps_user_diag_action(struct mps_softc *sc, mps_diag_action_t *data); static void mps_user_event_query(struct mps_softc *sc, mps_event_query_t *data); static void mps_user_event_enable(struct mps_softc *sc, mps_event_enable_t *data); static int mps_user_event_report(struct mps_softc *sc, mps_event_report_t *data); static int mps_user_reg_access(struct mps_softc *sc, mps_reg_access_t *data); static int mps_user_btdh(struct mps_softc *sc, mps_btdh_mapping_t *data); static MALLOC_DEFINE(M_MPSUSER, "mps_user", "Buffers for mps(4) ioctls"); /* Macros from compat/freebsd32/freebsd32.h */ #define PTRIN(v) (void *)(uintptr_t)(v) #define PTROUT(v) (uint32_t)(uintptr_t)(v) #define CP(src,dst,fld) do { (dst).fld = (src).fld; } while (0) #define PTRIN_CP(src,dst,fld) \ do { (dst).fld = PTRIN((src).fld); } while (0) #define PTROUT_CP(src,dst,fld) \ do { (dst).fld = PTROUT((src).fld); } while (0) int mps_attach_user(struct mps_softc *sc) { int unit; unit = device_get_unit(sc->mps_dev); sc->mps_cdev = make_dev(&mps_cdevsw, unit, UID_ROOT, GID_OPERATOR, 0640, "mps%d", unit); if (sc->mps_cdev == NULL) { return (ENOMEM); } sc->mps_cdev->si_drv1 = sc; return (0); } void mps_detach_user(struct mps_softc *sc) { /* XXX: do a purge of pending requests? */ if (sc->mps_cdev != NULL) destroy_dev(sc->mps_cdev); } static int mps_open(struct cdev *dev, int flags, int fmt, struct thread *td) { return (0); } static int mps_close(struct cdev *dev, int flags, int fmt, struct thread *td) { return (0); } static int mps_user_read_cfg_header(struct mps_softc *sc, struct mps_cfg_page_req *page_req) { MPI2_CONFIG_PAGE_HEADER *hdr; struct mps_config_params params; int error; hdr = ¶ms.hdr.Struct; params.action = MPI2_CONFIG_ACTION_PAGE_HEADER; params.page_address = le32toh(page_req->page_address); hdr->PageVersion = 0; hdr->PageLength = 0; hdr->PageNumber = page_req->header.PageNumber; hdr->PageType = page_req->header.PageType; params.buffer = NULL; params.length = 0; params.callback = NULL; if ((error = mps_read_config_page(sc, ¶ms)) != 0) { /* * Leave the request. Without resetting the chip, it's * still owned by it and we'll just get into trouble * freeing it now. Mark it as abandoned so that if it * shows up later it can be freed. */ mps_printf(sc, "read_cfg_header timed out\n"); return (ETIMEDOUT); } page_req->ioc_status = htole16(params.status); if ((page_req->ioc_status & MPI2_IOCSTATUS_MASK) == MPI2_IOCSTATUS_SUCCESS) { bcopy(hdr, &page_req->header, sizeof(page_req->header)); } return (0); } static int mps_user_read_cfg_page(struct mps_softc *sc, struct mps_cfg_page_req *page_req, void *buf) { MPI2_CONFIG_PAGE_HEADER *reqhdr, *hdr; struct mps_config_params params; int error; reqhdr = buf; hdr = ¶ms.hdr.Struct; hdr->PageVersion = reqhdr->PageVersion; hdr->PageLength = reqhdr->PageLength; hdr->PageNumber = reqhdr->PageNumber; hdr->PageType = reqhdr->PageType & MPI2_CONFIG_PAGETYPE_MASK; params.action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; params.page_address = le32toh(page_req->page_address); params.buffer = buf; params.length = le32toh(page_req->len); params.callback = NULL; if ((error = mps_read_config_page(sc, ¶ms)) != 0) { mps_printf(sc, "mps_user_read_cfg_page timed out\n"); return (ETIMEDOUT); } page_req->ioc_status = htole16(params.status); return (0); } static int mps_user_read_extcfg_header(struct mps_softc *sc, struct mps_ext_cfg_page_req *ext_page_req) { MPI2_CONFIG_EXTENDED_PAGE_HEADER *hdr; struct mps_config_params params; int error; hdr = ¶ms.hdr.Ext; params.action = MPI2_CONFIG_ACTION_PAGE_HEADER; hdr->PageVersion = ext_page_req->header.PageVersion; hdr->PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; hdr->ExtPageLength = 0; hdr->PageNumber = ext_page_req->header.PageNumber; hdr->ExtPageType = ext_page_req->header.ExtPageType; params.page_address = le32toh(ext_page_req->page_address); + params.buffer = NULL; + params.length = 0; + params.callback = NULL; + if ((error = mps_read_config_page(sc, ¶ms)) != 0) { /* * Leave the request. Without resetting the chip, it's * still owned by it and we'll just get into trouble * freeing it now. Mark it as abandoned so that if it * shows up later it can be freed. */ mps_printf(sc, "mps_user_read_extcfg_header timed out\n"); return (ETIMEDOUT); } ext_page_req->ioc_status = htole16(params.status); if ((ext_page_req->ioc_status & MPI2_IOCSTATUS_MASK) == MPI2_IOCSTATUS_SUCCESS) { ext_page_req->header.PageVersion = hdr->PageVersion; ext_page_req->header.PageNumber = hdr->PageNumber; ext_page_req->header.PageType = hdr->PageType; ext_page_req->header.ExtPageLength = hdr->ExtPageLength; ext_page_req->header.ExtPageType = hdr->ExtPageType; } return (0); } static int mps_user_read_extcfg_page(struct mps_softc *sc, struct mps_ext_cfg_page_req *ext_page_req, void *buf) { MPI2_CONFIG_EXTENDED_PAGE_HEADER *reqhdr, *hdr; struct mps_config_params params; int error; reqhdr = buf; hdr = ¶ms.hdr.Ext; params.action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; params.page_address = le32toh(ext_page_req->page_address); hdr->PageVersion = reqhdr->PageVersion; hdr->PageType = MPI2_CONFIG_PAGETYPE_EXTENDED; hdr->PageNumber = reqhdr->PageNumber; hdr->ExtPageType = reqhdr->ExtPageType; hdr->ExtPageLength = reqhdr->ExtPageLength; params.buffer = buf; params.length = le32toh(ext_page_req->len); params.callback = NULL; if ((error = mps_read_config_page(sc, ¶ms)) != 0) { mps_printf(sc, "mps_user_read_extcfg_page timed out\n"); return (ETIMEDOUT); } ext_page_req->ioc_status = htole16(params.status); return (0); } static int mps_user_write_cfg_page(struct mps_softc *sc, struct mps_cfg_page_req *page_req, void *buf) { MPI2_CONFIG_PAGE_HEADER *reqhdr, *hdr; struct mps_config_params params; u_int hdr_attr; int error; reqhdr = buf; hdr = ¶ms.hdr.Struct; hdr_attr = reqhdr->PageType & MPI2_CONFIG_PAGEATTR_MASK; if (hdr_attr != MPI2_CONFIG_PAGEATTR_CHANGEABLE && hdr_attr != MPI2_CONFIG_PAGEATTR_PERSISTENT) { mps_printf(sc, "page type 0x%x not changeable\n", reqhdr->PageType & MPI2_CONFIG_PAGETYPE_MASK); return (EINVAL); } /* * There isn't any point in restoring stripped out attributes * if you then mask them going down to issue the request. */ hdr->PageVersion = reqhdr->PageVersion; hdr->PageLength = reqhdr->PageLength; hdr->PageNumber = reqhdr->PageNumber; hdr->PageType = reqhdr->PageType; params.action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT; params.page_address = le32toh(page_req->page_address); params.buffer = buf; params.length = le32toh(page_req->len); params.callback = NULL; if ((error = mps_write_config_page(sc, ¶ms)) != 0) { mps_printf(sc, "mps_write_cfg_page timed out\n"); return (ETIMEDOUT); } page_req->ioc_status = htole16(params.status); return (0); } void mpi_init_sge(struct mps_command *cm, void *req, void *sge) { int off, space; space = (int)cm->cm_sc->facts->IOCRequestFrameSize * 4; off = (uintptr_t)sge - (uintptr_t)req; KASSERT(off < space, ("bad pointers %p %p, off %d, space %d", req, sge, off, space)); cm->cm_sge = sge; cm->cm_sglsize = space - off; } /* * Prepare the mps_command for an IOC_FACTS request. */ static int mpi_pre_ioc_facts(struct mps_command *cm, struct mps_usr_command *cmd) { MPI2_IOC_FACTS_REQUEST *req = (void *)cm->cm_req; MPI2_IOC_FACTS_REPLY *rpl; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); cm->cm_sge = NULL; cm->cm_sglsize = 0; return (0); } /* * Prepare the mps_command for a PORT_FACTS request. */ static int mpi_pre_port_facts(struct mps_command *cm, struct mps_usr_command *cmd) { MPI2_PORT_FACTS_REQUEST *req = (void *)cm->cm_req; MPI2_PORT_FACTS_REPLY *rpl; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); cm->cm_sge = NULL; cm->cm_sglsize = 0; return (0); } /* * Prepare the mps_command for a FW_DOWNLOAD request. */ static int mpi_pre_fw_download(struct mps_command *cm, struct mps_usr_command *cmd) { MPI2_FW_DOWNLOAD_REQUEST *req = (void *)cm->cm_req; MPI2_FW_DOWNLOAD_REPLY *rpl; MPI2_FW_DOWNLOAD_TCSGE tc; int error; /* * This code assumes there is room in the request's SGL for * the TransactionContext plus at least a SGL chain element. */ CTASSERT(sizeof req->SGL >= sizeof tc + MPS_SGC_SIZE); if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); if (cmd->len == 0) return (EINVAL); error = copyin(cmd->buf, cm->cm_data, cmd->len); if (error != 0) return (error); mpi_init_sge(cm, req, &req->SGL); bzero(&tc, sizeof tc); /* * For now, the F/W image must be provided in a single request. */ if ((req->MsgFlags & MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT) == 0) return (EINVAL); if (req->TotalImageSize != cmd->len) return (EINVAL); /* * The value of the first two elements is specified in the * Fusion-MPT Message Passing Interface document. */ tc.ContextSize = 0; tc.DetailsLength = 12; tc.ImageOffset = 0; tc.ImageSize = cmd->len; cm->cm_flags |= MPS_CM_FLAGS_DATAOUT; return (mps_push_sge(cm, &tc, sizeof tc, 0)); } /* * Prepare the mps_command for a FW_UPLOAD request. */ static int mpi_pre_fw_upload(struct mps_command *cm, struct mps_usr_command *cmd) { MPI2_FW_UPLOAD_REQUEST *req = (void *)cm->cm_req; MPI2_FW_UPLOAD_REPLY *rpl; MPI2_FW_UPLOAD_TCSGE tc; /* * This code assumes there is room in the request's SGL for * the TransactionContext plus at least a SGL chain element. */ CTASSERT(sizeof req->SGL >= sizeof tc + MPS_SGC_SIZE); if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); mpi_init_sge(cm, req, &req->SGL); bzero(&tc, sizeof tc); /* * The value of the first two elements is specified in the * Fusion-MPT Message Passing Interface document. */ tc.ContextSize = 0; tc.DetailsLength = 12; /* * XXX Is there any reason to fetch a partial image? I.e. to * set ImageOffset to something other than 0? */ tc.ImageOffset = 0; tc.ImageSize = cmd->len; cm->cm_flags |= MPS_CM_FLAGS_DATAIN; return (mps_push_sge(cm, &tc, sizeof tc, 0)); } /* * Prepare the mps_command for a SATA_PASSTHROUGH request. */ static int mpi_pre_sata_passthrough(struct mps_command *cm, struct mps_usr_command *cmd) { MPI2_SATA_PASSTHROUGH_REQUEST *req = (void *)cm->cm_req; MPI2_SATA_PASSTHROUGH_REPLY *rpl; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); mpi_init_sge(cm, req, &req->SGL); return (0); } /* * Prepare the mps_command for a SMP_PASSTHROUGH request. */ static int mpi_pre_smp_passthrough(struct mps_command *cm, struct mps_usr_command *cmd) { MPI2_SMP_PASSTHROUGH_REQUEST *req = (void *)cm->cm_req; MPI2_SMP_PASSTHROUGH_REPLY *rpl; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); mpi_init_sge(cm, req, &req->SGL); return (0); } /* * Prepare the mps_command for a CONFIG request. */ static int mpi_pre_config(struct mps_command *cm, struct mps_usr_command *cmd) { MPI2_CONFIG_REQUEST *req = (void *)cm->cm_req; MPI2_CONFIG_REPLY *rpl; if (cmd->req_len != sizeof *req) return (EINVAL); if (cmd->rpl_len != sizeof *rpl) return (EINVAL); mpi_init_sge(cm, req, &req->PageBufferSGE); return (0); } /* * Prepare the mps_command for a SAS_IO_UNIT_CONTROL request. */ static int mpi_pre_sas_io_unit_control(struct mps_command *cm, struct mps_usr_command *cmd) { cm->cm_sge = NULL; cm->cm_sglsize = 0; return (0); } /* * A set of functions to prepare an mps_command for the various * supported requests. */ struct mps_user_func { U8 Function; mps_user_f *f_pre; } mps_user_func_list[] = { { MPI2_FUNCTION_IOC_FACTS, mpi_pre_ioc_facts }, { MPI2_FUNCTION_PORT_FACTS, mpi_pre_port_facts }, { MPI2_FUNCTION_FW_DOWNLOAD, mpi_pre_fw_download }, { MPI2_FUNCTION_FW_UPLOAD, mpi_pre_fw_upload }, { MPI2_FUNCTION_SATA_PASSTHROUGH, mpi_pre_sata_passthrough }, { MPI2_FUNCTION_SMP_PASSTHROUGH, mpi_pre_smp_passthrough}, { MPI2_FUNCTION_CONFIG, mpi_pre_config}, { MPI2_FUNCTION_SAS_IO_UNIT_CONTROL, mpi_pre_sas_io_unit_control }, { 0xFF, NULL } /* list end */ }; static int mps_user_setup_request(struct mps_command *cm, struct mps_usr_command *cmd) { MPI2_REQUEST_HEADER *hdr = (MPI2_REQUEST_HEADER *)cm->cm_req; struct mps_user_func *f; for (f = mps_user_func_list; f->f_pre != NULL; f++) { if (hdr->Function == f->Function) return (f->f_pre(cm, cmd)); } return (EINVAL); } static int mps_user_command(struct mps_softc *sc, struct mps_usr_command *cmd) { MPI2_REQUEST_HEADER *hdr; MPI2_DEFAULT_REPLY *rpl; void *buf = NULL; struct mps_command *cm = NULL; int err = 0; int sz; mps_lock(sc); cm = mps_alloc_command(sc); if (cm == NULL) { mps_printf(sc, "%s: no mps requests\n", __func__); err = ENOMEM; goto Ret; } mps_unlock(sc); hdr = (MPI2_REQUEST_HEADER *)cm->cm_req; mps_dprint(sc, MPS_USER, "%s: req %p %d rpl %p %d\n", __func__, cmd->req, cmd->req_len, cmd->rpl, cmd->rpl_len); if (cmd->req_len > (int)sc->facts->IOCRequestFrameSize * 4) { err = EINVAL; goto RetFreeUnlocked; } err = copyin(cmd->req, hdr, cmd->req_len); if (err != 0) goto RetFreeUnlocked; mps_dprint(sc, MPS_USER, "%s: Function %02X MsgFlags %02X\n", __func__, hdr->Function, hdr->MsgFlags); if (cmd->len > 0) { buf = malloc(cmd->len, M_MPSUSER, M_WAITOK|M_ZERO); if(!buf) { mps_printf(sc, "Cannot allocate memory %s %d\n", __func__, __LINE__); return (ENOMEM); } cm->cm_data = buf; cm->cm_length = cmd->len; } else { cm->cm_data = NULL; cm->cm_length = 0; } cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; err = mps_user_setup_request(cm, cmd); if (err == EINVAL) { mps_printf(sc, "%s: unsupported parameter or unsupported " "function in request (function = 0x%X)\n", __func__, hdr->Function); } if (err != 0) goto RetFreeUnlocked; mps_lock(sc); err = mps_wait_command(sc, cm, 60, CAN_SLEEP); if (err) { mps_printf(sc, "%s: invalid request: error %d\n", __func__, err); goto Ret; } rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply; if (rpl != NULL) sz = rpl->MsgLength * 4; else sz = 0; if (sz > cmd->rpl_len) { mps_printf(sc, "%s: user reply buffer (%d) smaller than " "returned buffer (%d)\n", __func__, cmd->rpl_len, sz); sz = cmd->rpl_len; } mps_unlock(sc); copyout(rpl, cmd->rpl, sz); if (buf != NULL) copyout(buf, cmd->buf, cmd->len); mps_dprint(sc, MPS_USER, "%s: reply size %d\n", __func__, sz); RetFreeUnlocked: mps_lock(sc); if (cm != NULL) mps_free_command(sc, cm); Ret: mps_unlock(sc); if (buf != NULL) free(buf, M_MPSUSER); return (err); } static int mps_user_pass_thru(struct mps_softc *sc, mps_pass_thru_t *data) { MPI2_REQUEST_HEADER *hdr, tmphdr; MPI2_DEFAULT_REPLY *rpl; struct mps_command *cm = NULL; int err = 0, dir = 0, sz; uint8_t function = 0; u_int sense_len; /* * Only allow one passthru command at a time. Use the MPS_FLAGS_BUSY * bit to denote that a passthru is being processed. */ mps_lock(sc); if (sc->mps_flags & MPS_FLAGS_BUSY) { mps_dprint(sc, MPS_USER, "%s: Only one passthru command " "allowed at a single time.", __func__); mps_unlock(sc); return (EBUSY); } sc->mps_flags |= MPS_FLAGS_BUSY; mps_unlock(sc); /* * Do some validation on data direction. Valid cases are: * 1) DataSize is 0 and direction is NONE * 2) DataSize is non-zero and one of: * a) direction is READ or * b) direction is WRITE or * c) direction is BOTH and DataOutSize is non-zero * If valid and the direction is BOTH, change the direction to READ. * if valid and the direction is not BOTH, make sure DataOutSize is 0. */ if (((data->DataSize == 0) && (data->DataDirection == MPS_PASS_THRU_DIRECTION_NONE)) || ((data->DataSize != 0) && ((data->DataDirection == MPS_PASS_THRU_DIRECTION_READ) || (data->DataDirection == MPS_PASS_THRU_DIRECTION_WRITE) || ((data->DataDirection == MPS_PASS_THRU_DIRECTION_BOTH) && (data->DataOutSize != 0))))) { if (data->DataDirection == MPS_PASS_THRU_DIRECTION_BOTH) data->DataDirection = MPS_PASS_THRU_DIRECTION_READ; else data->DataOutSize = 0; } else return (EINVAL); mps_dprint(sc, MPS_USER, "%s: req 0x%jx %d rpl 0x%jx %d " "data in 0x%jx %d data out 0x%jx %d data dir %d\n", __func__, data->PtrRequest, data->RequestSize, data->PtrReply, data->ReplySize, data->PtrData, data->DataSize, data->PtrDataOut, data->DataOutSize, data->DataDirection); /* * copy in the header so we know what we're dealing with before we * commit to allocating a command for it. */ err = copyin(PTRIN(data->PtrRequest), &tmphdr, data->RequestSize); if (err != 0) goto RetFreeUnlocked; if (data->RequestSize > (int)sc->facts->IOCRequestFrameSize * 4) { err = EINVAL; goto RetFreeUnlocked; } function = tmphdr.Function; mps_dprint(sc, MPS_USER, "%s: Function %02X MsgFlags %02X\n", __func__, function, tmphdr.MsgFlags); /* * Handle a passthru TM request. */ if (function == MPI2_FUNCTION_SCSI_TASK_MGMT) { MPI2_SCSI_TASK_MANAGE_REQUEST *task; mps_lock(sc); cm = mpssas_alloc_tm(sc); if (cm == NULL) { err = EINVAL; goto Ret; } /* Copy the header in. Only a small fixup is needed. */ task = (MPI2_SCSI_TASK_MANAGE_REQUEST *)cm->cm_req; bcopy(&tmphdr, task, data->RequestSize); task->TaskMID = cm->cm_desc.Default.SMID; cm->cm_data = NULL; cm->cm_desc.HighPriority.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY; cm->cm_complete = NULL; cm->cm_complete_data = NULL; err = mps_wait_command(sc, cm, 30, CAN_SLEEP); if (err != 0) { err = EIO; mps_dprint(sc, MPS_FAULT, "%s: task management failed", __func__); } /* * Copy the reply data and sense data to user space. */ if (cm->cm_reply != NULL) { rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply; sz = rpl->MsgLength * 4; if (sz > data->ReplySize) { mps_printf(sc, "%s: user reply buffer (%d) " "smaller than returned buffer (%d)\n", __func__, data->ReplySize, sz); } mps_unlock(sc); copyout(cm->cm_reply, PTRIN(data->PtrReply), data->ReplySize); mps_lock(sc); } mpssas_free_tm(sc, cm); goto Ret; } mps_lock(sc); cm = mps_alloc_command(sc); if (cm == NULL) { mps_printf(sc, "%s: no mps requests\n", __func__); err = ENOMEM; goto Ret; } mps_unlock(sc); hdr = (MPI2_REQUEST_HEADER *)cm->cm_req; bcopy(&tmphdr, hdr, data->RequestSize); /* * Do some checking to make sure the IOCTL request contains a valid * request. Then set the SGL info. */ mpi_init_sge(cm, hdr, (void *)((uint8_t *)hdr + data->RequestSize)); /* * Set up for read, write or both. From check above, DataOutSize will * be 0 if direction is READ or WRITE, but it will have some non-zero * value if the direction is BOTH. So, just use the biggest size to get * the cm_data buffer size. If direction is BOTH, 2 SGLs need to be set * up; the first is for the request and the second will contain the * response data. cm_out_len needs to be set here and this will be used * when the SGLs are set up. */ cm->cm_data = NULL; cm->cm_length = MAX(data->DataSize, data->DataOutSize); cm->cm_out_len = data->DataOutSize; cm->cm_flags = 0; if (cm->cm_length != 0) { cm->cm_data = malloc(cm->cm_length, M_MPSUSER, M_WAITOK | M_ZERO); if (cm->cm_data == NULL) { mps_dprint(sc, MPS_FAULT, "%s: alloc failed for IOCTL " "passthru length %d\n", __func__, cm->cm_length); } else { cm->cm_flags = MPS_CM_FLAGS_DATAIN; if (data->DataOutSize) { cm->cm_flags |= MPS_CM_FLAGS_DATAOUT; err = copyin(PTRIN(data->PtrDataOut), cm->cm_data, data->DataOutSize); } else if (data->DataDirection == MPS_PASS_THRU_DIRECTION_WRITE) { cm->cm_flags = MPS_CM_FLAGS_DATAOUT; err = copyin(PTRIN(data->PtrData), cm->cm_data, data->DataSize); } if (err != 0) mps_dprint(sc, MPS_FAULT, "%s: failed to copy " "IOCTL data from user space\n", __func__); } } cm->cm_flags |= MPS_CM_FLAGS_SGE_SIMPLE; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; /* * Set up Sense buffer and SGL offset for IO passthru. SCSI IO request * uses SCSI IO descriptor. */ if ((function == MPI2_FUNCTION_SCSI_IO_REQUEST) || (function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { MPI2_SCSI_IO_REQUEST *scsi_io_req; scsi_io_req = (MPI2_SCSI_IO_REQUEST *)hdr; /* * Put SGE for data and data_out buffer at the end of * scsi_io_request message header (64 bytes in total). * Following above SGEs, the residual space will be used by * sense data. */ scsi_io_req->SenseBufferLength = (uint8_t)(data->RequestSize - 64); scsi_io_req->SenseBufferLowAddress = htole32(cm->cm_sense_busaddr); /* * Set SGLOffset0 value. This is the number of dwords that SGL * is offset from the beginning of MPI2_SCSI_IO_REQUEST struct. */ scsi_io_req->SGLOffset0 = 24; /* * Setup descriptor info. RAID passthrough must use the * default request descriptor which is already set, so if this * is a SCSI IO request, change the descriptor to SCSI IO. * Also, if this is a SCSI IO request, handle the reply in the * mpssas_scsio_complete function. */ if (function == MPI2_FUNCTION_SCSI_IO_REQUEST) { cm->cm_desc.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; cm->cm_desc.SCSIIO.DevHandle = scsi_io_req->DevHandle; /* * Make sure the DevHandle is not 0 because this is a * likely error. */ if (scsi_io_req->DevHandle == 0) { err = EINVAL; goto RetFreeUnlocked; } } } mps_lock(sc); err = mps_wait_command(sc, cm, 30, CAN_SLEEP); if (err) { mps_printf(sc, "%s: invalid request: error %d\n", __func__, err); mps_unlock(sc); goto RetFreeUnlocked; } /* * Sync the DMA data, if any. Then copy the data to user space. */ if (cm->cm_data != NULL) { if (cm->cm_flags & MPS_CM_FLAGS_DATAIN) dir = BUS_DMASYNC_POSTREAD; else if (cm->cm_flags & MPS_CM_FLAGS_DATAOUT) dir = BUS_DMASYNC_POSTWRITE; bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir); bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap); if (cm->cm_flags & MPS_CM_FLAGS_DATAIN) { mps_unlock(sc); err = copyout(cm->cm_data, PTRIN(data->PtrData), data->DataSize); mps_lock(sc); if (err != 0) mps_dprint(sc, MPS_FAULT, "%s: failed to copy " "IOCTL data to user space\n", __func__); } } /* * Copy the reply data and sense data to user space. */ if (cm->cm_reply != NULL) { rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply; sz = rpl->MsgLength * 4; if (sz > data->ReplySize) { mps_printf(sc, "%s: user reply buffer (%d) smaller " "than returned buffer (%d)\n", __func__, data->ReplySize, sz); } mps_unlock(sc); copyout(cm->cm_reply, PTRIN(data->PtrReply), data->ReplySize); mps_lock(sc); if ((function == MPI2_FUNCTION_SCSI_IO_REQUEST) || (function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) { if (((MPI2_SCSI_IO_REPLY *)rpl)->SCSIState & MPI2_SCSI_STATE_AUTOSENSE_VALID) { sense_len = MIN((le32toh(((MPI2_SCSI_IO_REPLY *)rpl)->SenseCount)), sizeof(struct scsi_sense_data)); mps_unlock(sc); copyout(cm->cm_sense, cm->cm_req + 64, sense_len); mps_lock(sc); } } } mps_unlock(sc); RetFreeUnlocked: mps_lock(sc); if (cm != NULL) { if (cm->cm_data) free(cm->cm_data, M_MPSUSER); mps_free_command(sc, cm); } Ret: sc->mps_flags &= ~MPS_FLAGS_BUSY; mps_unlock(sc); return (err); } static void mps_user_get_adapter_data(struct mps_softc *sc, mps_adapter_data_t *data) { Mpi2ConfigReply_t mpi_reply; Mpi2BiosPage3_t config_page; /* * Use the PCI interface functions to get the Bus, Device, and Function * information. */ data->PciInformation.u.bits.BusNumber = pci_get_bus(sc->mps_dev); data->PciInformation.u.bits.DeviceNumber = pci_get_slot(sc->mps_dev); data->PciInformation.u.bits.FunctionNumber = pci_get_function(sc->mps_dev); /* * Get the FW version that should already be saved in IOC Facts. */ data->MpiFirmwareVersion = sc->facts->FWVersion.Word; /* * General device info. */ data->AdapterType = MPSIOCTL_ADAPTER_TYPE_SAS2; if (sc->mps_flags & MPS_FLAGS_WD_AVAILABLE) data->AdapterType = MPSIOCTL_ADAPTER_TYPE_SAS2_SSS6200; data->PCIDeviceHwId = pci_get_device(sc->mps_dev); data->PCIDeviceHwRev = pci_read_config(sc->mps_dev, PCIR_REVID, 1); data->SubSystemId = pci_get_subdevice(sc->mps_dev); data->SubsystemVendorId = pci_get_subvendor(sc->mps_dev); /* * Get the driver version. */ strcpy((char *)&data->DriverVersion[0], MPS_DRIVER_VERSION); /* * Need to get BIOS Config Page 3 for the BIOS Version. */ data->BiosVersion = 0; mps_lock(sc); if (mps_config_get_bios_pg3(sc, &mpi_reply, &config_page)) printf("%s: Error while retrieving BIOS Version\n", __func__); else data->BiosVersion = config_page.BiosVersion; mps_unlock(sc); } static void mps_user_read_pci_info(struct mps_softc *sc, mps_pci_info_t *data) { int i; /* * Use the PCI interface functions to get the Bus, Device, and Function * information. */ data->BusNumber = pci_get_bus(sc->mps_dev); data->DeviceNumber = pci_get_slot(sc->mps_dev); data->FunctionNumber = pci_get_function(sc->mps_dev); /* * Now get the interrupt vector and the pci header. The vector can * only be 0 right now. The header is the first 256 bytes of config * space. */ data->InterruptVector = 0; for (i = 0; i < sizeof (data->PciHeader); i++) { data->PciHeader[i] = pci_read_config(sc->mps_dev, i, 1); } } static uint8_t mps_get_fw_diag_buffer_number(struct mps_softc *sc, uint32_t unique_id) { uint8_t index; for (index = 0; index < MPI2_DIAG_BUF_TYPE_COUNT; index++) { if (sc->fw_diag_buffer_list[index].unique_id == unique_id) { return (index); } } return (MPS_FW_DIAGNOSTIC_UID_NOT_FOUND); } static int mps_post_fw_diag_buffer(struct mps_softc *sc, mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code) { MPI2_DIAG_BUFFER_POST_REQUEST *req; MPI2_DIAG_BUFFER_POST_REPLY *reply; struct mps_command *cm = NULL; int i, status; /* * If buffer is not enabled, just leave. */ *return_code = MPS_FW_DIAG_ERROR_POST_FAILED; if (!pBuffer->enabled) { return (MPS_DIAG_FAILURE); } /* * Clear some flags initially. */ pBuffer->force_release = FALSE; pBuffer->valid_data = FALSE; pBuffer->owned_by_firmware = FALSE; /* * Get a command. */ cm = mps_alloc_command(sc); if (cm == NULL) { mps_printf(sc, "%s: no mps requests\n", __func__); return (MPS_DIAG_FAILURE); } /* * Build the request for releasing the FW Diag Buffer and send it. */ req = (MPI2_DIAG_BUFFER_POST_REQUEST *)cm->cm_req; req->Function = MPI2_FUNCTION_DIAG_BUFFER_POST; req->BufferType = pBuffer->buffer_type; req->ExtendedType = pBuffer->extended_type; req->BufferLength = pBuffer->size; for (i = 0; i < (sizeof(req->ProductSpecific) / 4); i++) req->ProductSpecific[i] = pBuffer->product_specific[i]; mps_from_u64(sc->fw_diag_busaddr, &req->BufferAddress); cm->cm_data = NULL; cm->cm_length = 0; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_complete_data = NULL; /* * Send command synchronously. */ status = mps_wait_command(sc, cm, 30, CAN_SLEEP); if (status) { mps_printf(sc, "%s: invalid request: error %d\n", __func__, status); status = MPS_DIAG_FAILURE; goto done; } /* * Process POST reply. */ reply = (MPI2_DIAG_BUFFER_POST_REPLY *)cm->cm_reply; if (reply->IOCStatus != MPI2_IOCSTATUS_SUCCESS) { status = MPS_DIAG_FAILURE; mps_dprint(sc, MPS_FAULT, "%s: post of FW Diag Buffer failed " "with IOCStatus = 0x%x, IOCLogInfo = 0x%x and " "TransferLength = 0x%x\n", __func__, reply->IOCStatus, reply->IOCLogInfo, reply->TransferLength); goto done; } /* * Post was successful. */ pBuffer->valid_data = TRUE; pBuffer->owned_by_firmware = TRUE; *return_code = MPS_FW_DIAG_ERROR_SUCCESS; status = MPS_DIAG_SUCCESS; done: mps_free_command(sc, cm); return (status); } static int mps_release_fw_diag_buffer(struct mps_softc *sc, mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code, uint32_t diag_type) { MPI2_DIAG_RELEASE_REQUEST *req; MPI2_DIAG_RELEASE_REPLY *reply; struct mps_command *cm = NULL; int status; /* * If buffer is not enabled, just leave. */ *return_code = MPS_FW_DIAG_ERROR_RELEASE_FAILED; if (!pBuffer->enabled) { mps_dprint(sc, MPS_USER, "%s: This buffer type is not " "supported by the IOC", __func__); return (MPS_DIAG_FAILURE); } /* * Clear some flags initially. */ pBuffer->force_release = FALSE; pBuffer->valid_data = FALSE; pBuffer->owned_by_firmware = FALSE; /* * Get a command. */ cm = mps_alloc_command(sc); if (cm == NULL) { mps_printf(sc, "%s: no mps requests\n", __func__); return (MPS_DIAG_FAILURE); } /* * Build the request for releasing the FW Diag Buffer and send it. */ req = (MPI2_DIAG_RELEASE_REQUEST *)cm->cm_req; req->Function = MPI2_FUNCTION_DIAG_RELEASE; req->BufferType = pBuffer->buffer_type; cm->cm_data = NULL; cm->cm_length = 0; cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; cm->cm_complete_data = NULL; /* * Send command synchronously. */ status = mps_wait_command(sc, cm, 30, CAN_SLEEP); if (status) { mps_printf(sc, "%s: invalid request: error %d\n", __func__, status); status = MPS_DIAG_FAILURE; goto done; } /* * Process RELEASE reply. */ reply = (MPI2_DIAG_RELEASE_REPLY *)cm->cm_reply; if ((reply->IOCStatus != MPI2_IOCSTATUS_SUCCESS) || pBuffer->owned_by_firmware) { status = MPS_DIAG_FAILURE; mps_dprint(sc, MPS_FAULT, "%s: release of FW Diag Buffer " "failed with IOCStatus = 0x%x and IOCLogInfo = 0x%x\n", __func__, reply->IOCStatus, reply->IOCLogInfo); goto done; } /* * Release was successful. */ *return_code = MPS_FW_DIAG_ERROR_SUCCESS; status = MPS_DIAG_SUCCESS; /* * If this was for an UNREGISTER diag type command, clear the unique ID. */ if (diag_type == MPS_FW_DIAG_TYPE_UNREGISTER) { pBuffer->unique_id = MPS_FW_DIAG_INVALID_UID; } done: return (status); } static int mps_diag_register(struct mps_softc *sc, mps_fw_diag_register_t *diag_register, uint32_t *return_code) { mps_fw_diagnostic_buffer_t *pBuffer; uint8_t extended_type, buffer_type, i; uint32_t buffer_size; uint32_t unique_id; int status; extended_type = diag_register->ExtendedType; buffer_type = diag_register->BufferType; buffer_size = diag_register->RequestedBufferSize; unique_id = diag_register->UniqueId; /* * Check for valid buffer type */ if (buffer_type >= MPI2_DIAG_BUF_TYPE_COUNT) { *return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER; return (MPS_DIAG_FAILURE); } /* * Get the current buffer and look up the unique ID. The unique ID * should not be found. If it is, the ID is already in use. */ i = mps_get_fw_diag_buffer_number(sc, unique_id); pBuffer = &sc->fw_diag_buffer_list[buffer_type]; if (i != MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) { *return_code = MPS_FW_DIAG_ERROR_INVALID_UID; return (MPS_DIAG_FAILURE); } /* * The buffer's unique ID should not be registered yet, and the given * unique ID cannot be 0. */ if ((pBuffer->unique_id != MPS_FW_DIAG_INVALID_UID) || (unique_id == MPS_FW_DIAG_INVALID_UID)) { *return_code = MPS_FW_DIAG_ERROR_INVALID_UID; return (MPS_DIAG_FAILURE); } /* * If this buffer is already posted as immediate, just change owner. */ if (pBuffer->immediate && pBuffer->owned_by_firmware && (pBuffer->unique_id == MPS_FW_DIAG_INVALID_UID)) { pBuffer->immediate = FALSE; pBuffer->unique_id = unique_id; return (MPS_DIAG_SUCCESS); } /* * Post a new buffer after checking if it's enabled. The DMA buffer * that is allocated will be contiguous (nsegments = 1). */ if (!pBuffer->enabled) { *return_code = MPS_FW_DIAG_ERROR_NO_BUFFER; return (MPS_DIAG_FAILURE); } if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */ 1, 0, /* algnmnt, boundary */ BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ buffer_size, /* maxsize */ 1, /* nsegments */ buffer_size, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->fw_diag_dmat)) { device_printf(sc->mps_dev, "Cannot allocate FW diag buffer DMA " "tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->fw_diag_dmat, (void **)&sc->fw_diag_buffer, BUS_DMA_NOWAIT, &sc->fw_diag_map)) { device_printf(sc->mps_dev, "Cannot allocate FW diag buffer " "memory\n"); return (ENOMEM); } bzero(sc->fw_diag_buffer, buffer_size); bus_dmamap_load(sc->fw_diag_dmat, sc->fw_diag_map, sc->fw_diag_buffer, buffer_size, mps_memaddr_cb, &sc->fw_diag_busaddr, 0); pBuffer->size = buffer_size; /* * Copy the given info to the diag buffer and post the buffer. */ pBuffer->buffer_type = buffer_type; pBuffer->immediate = FALSE; if (buffer_type == MPI2_DIAG_BUF_TYPE_TRACE) { for (i = 0; i < (sizeof (pBuffer->product_specific) / 4); i++) { pBuffer->product_specific[i] = diag_register->ProductSpecific[i]; } } pBuffer->extended_type = extended_type; pBuffer->unique_id = unique_id; status = mps_post_fw_diag_buffer(sc, pBuffer, return_code); /* * In case there was a failure, free the DMA buffer. */ if (status == MPS_DIAG_FAILURE) { if (sc->fw_diag_busaddr != 0) bus_dmamap_unload(sc->fw_diag_dmat, sc->fw_diag_map); if (sc->fw_diag_buffer != NULL) bus_dmamem_free(sc->fw_diag_dmat, sc->fw_diag_buffer, sc->fw_diag_map); if (sc->fw_diag_dmat != NULL) bus_dma_tag_destroy(sc->fw_diag_dmat); } return (status); } static int mps_diag_unregister(struct mps_softc *sc, mps_fw_diag_unregister_t *diag_unregister, uint32_t *return_code) { mps_fw_diagnostic_buffer_t *pBuffer; uint8_t i; uint32_t unique_id; int status; unique_id = diag_unregister->UniqueId; /* * Get the current buffer and look up the unique ID. The unique ID * should be there. */ i = mps_get_fw_diag_buffer_number(sc, unique_id); if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) { *return_code = MPS_FW_DIAG_ERROR_INVALID_UID; return (MPS_DIAG_FAILURE); } pBuffer = &sc->fw_diag_buffer_list[i]; /* * Try to release the buffer from FW before freeing it. If release * fails, don't free the DMA buffer in case FW tries to access it * later. If buffer is not owned by firmware, can't release it. */ if (!pBuffer->owned_by_firmware) { status = MPS_DIAG_SUCCESS; } else { status = mps_release_fw_diag_buffer(sc, pBuffer, return_code, MPS_FW_DIAG_TYPE_UNREGISTER); } /* * At this point, return the current status no matter what happens with * the DMA buffer. */ pBuffer->unique_id = MPS_FW_DIAG_INVALID_UID; if (status == MPS_DIAG_SUCCESS) { if (sc->fw_diag_busaddr != 0) bus_dmamap_unload(sc->fw_diag_dmat, sc->fw_diag_map); if (sc->fw_diag_buffer != NULL) bus_dmamem_free(sc->fw_diag_dmat, sc->fw_diag_buffer, sc->fw_diag_map); if (sc->fw_diag_dmat != NULL) bus_dma_tag_destroy(sc->fw_diag_dmat); } return (status); } static int mps_diag_query(struct mps_softc *sc, mps_fw_diag_query_t *diag_query, uint32_t *return_code) { mps_fw_diagnostic_buffer_t *pBuffer; uint8_t i; uint32_t unique_id; unique_id = diag_query->UniqueId; /* * If ID is valid, query on ID. * If ID is invalid, query on buffer type. */ if (unique_id == MPS_FW_DIAG_INVALID_UID) { i = diag_query->BufferType; if (i >= MPI2_DIAG_BUF_TYPE_COUNT) { *return_code = MPS_FW_DIAG_ERROR_INVALID_UID; return (MPS_DIAG_FAILURE); } } else { i = mps_get_fw_diag_buffer_number(sc, unique_id); if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) { *return_code = MPS_FW_DIAG_ERROR_INVALID_UID; return (MPS_DIAG_FAILURE); } } /* * Fill query structure with the diag buffer info. */ pBuffer = &sc->fw_diag_buffer_list[i]; diag_query->BufferType = pBuffer->buffer_type; diag_query->ExtendedType = pBuffer->extended_type; if (diag_query->BufferType == MPI2_DIAG_BUF_TYPE_TRACE) { for (i = 0; i < (sizeof(diag_query->ProductSpecific) / 4); i++) { diag_query->ProductSpecific[i] = pBuffer->product_specific[i]; } } diag_query->TotalBufferSize = pBuffer->size; diag_query->DriverAddedBufferSize = 0; diag_query->UniqueId = pBuffer->unique_id; diag_query->ApplicationFlags = 0; diag_query->DiagnosticFlags = 0; /* * Set/Clear application flags */ if (pBuffer->immediate) { diag_query->ApplicationFlags &= ~MPS_FW_DIAG_FLAG_APP_OWNED; } else { diag_query->ApplicationFlags |= MPS_FW_DIAG_FLAG_APP_OWNED; } if (pBuffer->valid_data || pBuffer->owned_by_firmware) { diag_query->ApplicationFlags |= MPS_FW_DIAG_FLAG_BUFFER_VALID; } else { diag_query->ApplicationFlags &= ~MPS_FW_DIAG_FLAG_BUFFER_VALID; } if (pBuffer->owned_by_firmware) { diag_query->ApplicationFlags |= MPS_FW_DIAG_FLAG_FW_BUFFER_ACCESS; } else { diag_query->ApplicationFlags &= ~MPS_FW_DIAG_FLAG_FW_BUFFER_ACCESS; } return (MPS_DIAG_SUCCESS); } static int mps_diag_read_buffer(struct mps_softc *sc, mps_diag_read_buffer_t *diag_read_buffer, uint8_t *ioctl_buf, uint32_t *return_code) { mps_fw_diagnostic_buffer_t *pBuffer; uint8_t i, *pData; uint32_t unique_id; int status; unique_id = diag_read_buffer->UniqueId; /* * Get the current buffer and look up the unique ID. The unique ID * should be there. */ i = mps_get_fw_diag_buffer_number(sc, unique_id); if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) { *return_code = MPS_FW_DIAG_ERROR_INVALID_UID; return (MPS_DIAG_FAILURE); } pBuffer = &sc->fw_diag_buffer_list[i]; /* * Make sure requested read is within limits */ if (diag_read_buffer->StartingOffset + diag_read_buffer->BytesToRead > pBuffer->size) { *return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER; return (MPS_DIAG_FAILURE); } /* * Copy the requested data from DMA to the diag_read_buffer. The DMA * buffer that was allocated is one contiguous buffer. */ pData = (uint8_t *)(sc->fw_diag_buffer + diag_read_buffer->StartingOffset); if (copyout(pData, ioctl_buf, diag_read_buffer->BytesToRead) != 0) return (MPS_DIAG_FAILURE); diag_read_buffer->Status = 0; /* * Set or clear the Force Release flag. */ if (pBuffer->force_release) { diag_read_buffer->Flags |= MPS_FW_DIAG_FLAG_FORCE_RELEASE; } else { diag_read_buffer->Flags &= ~MPS_FW_DIAG_FLAG_FORCE_RELEASE; } /* * If buffer is to be reregistered, make sure it's not already owned by * firmware first. */ status = MPS_DIAG_SUCCESS; if (!pBuffer->owned_by_firmware) { if (diag_read_buffer->Flags & MPS_FW_DIAG_FLAG_REREGISTER) { status = mps_post_fw_diag_buffer(sc, pBuffer, return_code); } } return (status); } static int mps_diag_release(struct mps_softc *sc, mps_fw_diag_release_t *diag_release, uint32_t *return_code) { mps_fw_diagnostic_buffer_t *pBuffer; uint8_t i; uint32_t unique_id; int status; unique_id = diag_release->UniqueId; /* * Get the current buffer and look up the unique ID. The unique ID * should be there. */ i = mps_get_fw_diag_buffer_number(sc, unique_id); if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) { *return_code = MPS_FW_DIAG_ERROR_INVALID_UID; return (MPS_DIAG_FAILURE); } pBuffer = &sc->fw_diag_buffer_list[i]; /* * If buffer is not owned by firmware, it's already been released. */ if (!pBuffer->owned_by_firmware) { *return_code = MPS_FW_DIAG_ERROR_ALREADY_RELEASED; return (MPS_DIAG_FAILURE); } /* * Release the buffer. */ status = mps_release_fw_diag_buffer(sc, pBuffer, return_code, MPS_FW_DIAG_TYPE_RELEASE); return (status); } static int mps_do_diag_action(struct mps_softc *sc, uint32_t action, uint8_t *diag_action, uint32_t length, uint32_t *return_code) { mps_fw_diag_register_t diag_register; mps_fw_diag_unregister_t diag_unregister; mps_fw_diag_query_t diag_query; mps_diag_read_buffer_t diag_read_buffer; mps_fw_diag_release_t diag_release; int status = MPS_DIAG_SUCCESS; uint32_t original_return_code; original_return_code = *return_code; *return_code = MPS_FW_DIAG_ERROR_SUCCESS; switch (action) { case MPS_FW_DIAG_TYPE_REGISTER: if (!length) { *return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPS_DIAG_FAILURE; break; } if (copyin(diag_action, &diag_register, sizeof(diag_register)) != 0) return (MPS_DIAG_FAILURE); status = mps_diag_register(sc, &diag_register, return_code); break; case MPS_FW_DIAG_TYPE_UNREGISTER: if (length < sizeof(diag_unregister)) { *return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPS_DIAG_FAILURE; break; } if (copyin(diag_action, &diag_unregister, sizeof(diag_unregister)) != 0) return (MPS_DIAG_FAILURE); status = mps_diag_unregister(sc, &diag_unregister, return_code); break; case MPS_FW_DIAG_TYPE_QUERY: if (length < sizeof (diag_query)) { *return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPS_DIAG_FAILURE; break; } if (copyin(diag_action, &diag_query, sizeof(diag_query)) != 0) return (MPS_DIAG_FAILURE); status = mps_diag_query(sc, &diag_query, return_code); if (status == MPS_DIAG_SUCCESS) if (copyout(&diag_query, diag_action, sizeof (diag_query)) != 0) return (MPS_DIAG_FAILURE); break; case MPS_FW_DIAG_TYPE_READ_BUFFER: if (copyin(diag_action, &diag_read_buffer, sizeof(diag_read_buffer)) != 0) return (MPS_DIAG_FAILURE); if (length < diag_read_buffer.BytesToRead) { *return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPS_DIAG_FAILURE; break; } status = mps_diag_read_buffer(sc, &diag_read_buffer, PTRIN(diag_read_buffer.PtrDataBuffer), return_code); if (status == MPS_DIAG_SUCCESS) { if (copyout(&diag_read_buffer, diag_action, sizeof(diag_read_buffer) - sizeof(diag_read_buffer.PtrDataBuffer)) != 0) return (MPS_DIAG_FAILURE); } break; case MPS_FW_DIAG_TYPE_RELEASE: if (length < sizeof(diag_release)) { *return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPS_DIAG_FAILURE; break; } if (copyin(diag_action, &diag_release, sizeof(diag_release)) != 0) return (MPS_DIAG_FAILURE); status = mps_diag_release(sc, &diag_release, return_code); break; default: *return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER; status = MPS_DIAG_FAILURE; break; } if ((status == MPS_DIAG_FAILURE) && (original_return_code == MPS_FW_DIAG_NEW) && (*return_code != MPS_FW_DIAG_ERROR_SUCCESS)) status = MPS_DIAG_SUCCESS; return (status); } static int mps_user_diag_action(struct mps_softc *sc, mps_diag_action_t *data) { int status; /* * Only allow one diag action at one time. */ if (sc->mps_flags & MPS_FLAGS_BUSY) { mps_dprint(sc, MPS_USER, "%s: Only one FW diag command " "allowed at a single time.", __func__); return (EBUSY); } sc->mps_flags |= MPS_FLAGS_BUSY; /* * Send diag action request */ if (data->Action == MPS_FW_DIAG_TYPE_REGISTER || data->Action == MPS_FW_DIAG_TYPE_UNREGISTER || data->Action == MPS_FW_DIAG_TYPE_QUERY || data->Action == MPS_FW_DIAG_TYPE_READ_BUFFER || data->Action == MPS_FW_DIAG_TYPE_RELEASE) { status = mps_do_diag_action(sc, data->Action, PTRIN(data->PtrDiagAction), data->Length, &data->ReturnCode); } else status = EINVAL; sc->mps_flags &= ~MPS_FLAGS_BUSY; return (status); } /* * Copy the event recording mask and the event queue size out. For * clarification, the event recording mask (events_to_record) is not the same * thing as the event mask (event_mask). events_to_record has a bit set for * every event type that is to be recorded by the driver, and event_mask has a * bit cleared for every event that is allowed into the driver from the IOC. * They really have nothing to do with each other. */ static void mps_user_event_query(struct mps_softc *sc, mps_event_query_t *data) { uint8_t i; mps_lock(sc); data->Entries = MPS_EVENT_QUEUE_SIZE; for (i = 0; i < 4; i++) { data->Types[i] = sc->events_to_record[i]; } mps_unlock(sc); } /* * Set the driver's event mask according to what's been given. See * mps_user_event_query for explanation of the event recording mask and the IOC * event mask. It's the app's responsibility to enable event logging by setting * the bits in events_to_record. Initially, no events will be logged. */ static void mps_user_event_enable(struct mps_softc *sc, mps_event_enable_t *data) { uint8_t i; mps_lock(sc); for (i = 0; i < 4; i++) { sc->events_to_record[i] = data->Types[i]; } mps_unlock(sc); } /* * Copy out the events that have been recorded, up to the max events allowed. */ static int mps_user_event_report(struct mps_softc *sc, mps_event_report_t *data) { int status = 0; uint32_t size; mps_lock(sc); size = data->Size; if ((size >= sizeof(sc->recorded_events)) && (status == 0)) { mps_unlock(sc); if (copyout((void *)sc->recorded_events, PTRIN(data->PtrEvents), size) != 0) status = EFAULT; mps_lock(sc); } else { /* * data->Size value is not large enough to copy event data. */ status = EFAULT; } /* * Change size value to match the number of bytes that were copied. */ if (status == 0) data->Size = sizeof(sc->recorded_events); mps_unlock(sc); return (status); } /* * Record events into the driver from the IOC if they are not masked. */ void mpssas_record_event(struct mps_softc *sc, MPI2_EVENT_NOTIFICATION_REPLY *event_reply) { uint32_t event; int i, j; uint16_t event_data_len; boolean_t sendAEN = FALSE; event = event_reply->Event; /* * Generate a system event to let anyone who cares know that a * LOG_ENTRY_ADDED event has occurred. This is sent no matter what the * event mask is set to. */ if (event == MPI2_EVENT_LOG_ENTRY_ADDED) { sendAEN = TRUE; } /* * Record the event only if its corresponding bit is set in * events_to_record. event_index is the index into recorded_events and * event_number is the overall number of an event being recorded since * start-of-day. event_index will roll over; event_number will never * roll over. */ i = (uint8_t)(event / 32); j = (uint8_t)(event % 32); if ((i < 4) && ((1 << j) & sc->events_to_record[i])) { i = sc->event_index; sc->recorded_events[i].Type = event; sc->recorded_events[i].Number = ++sc->event_number; bzero(sc->recorded_events[i].Data, MPS_MAX_EVENT_DATA_LENGTH * 4); event_data_len = event_reply->EventDataLength; if (event_data_len > 0) { /* * Limit data to size in m_event entry */ if (event_data_len > MPS_MAX_EVENT_DATA_LENGTH) { event_data_len = MPS_MAX_EVENT_DATA_LENGTH; } for (j = 0; j < event_data_len; j++) { sc->recorded_events[i].Data[j] = event_reply->EventData[j]; } /* * check for index wrap-around */ if (++i == MPS_EVENT_QUEUE_SIZE) { i = 0; } sc->event_index = (uint8_t)i; /* * Set flag to send the event. */ sendAEN = TRUE; } } /* * Generate a system event if flag is set to let anyone who cares know * that an event has occurred. */ if (sendAEN) { //SLM-how to send a system event (see kqueue, kevent) // (void) ddi_log_sysevent(mpt->m_dip, DDI_VENDOR_LSI, "MPT_SAS", // "SAS", NULL, NULL, DDI_NOSLEEP); } } static int mps_user_reg_access(struct mps_softc *sc, mps_reg_access_t *data) { int status = 0; switch (data->Command) { /* * IO access is not supported. */ case REG_IO_READ: case REG_IO_WRITE: mps_dprint(sc, MPS_USER, "IO access is not supported. " "Use memory access."); status = EINVAL; break; case REG_MEM_READ: data->RegData = mps_regread(sc, data->RegOffset); break; case REG_MEM_WRITE: mps_regwrite(sc, data->RegOffset, data->RegData); break; default: status = EINVAL; break; } return (status); } static int mps_user_btdh(struct mps_softc *sc, mps_btdh_mapping_t *data) { uint8_t bt2dh = FALSE; uint8_t dh2bt = FALSE; uint16_t dev_handle, bus, target; bus = data->Bus; target = data->TargetID; dev_handle = data->DevHandle; /* * When DevHandle is 0xFFFF and Bus/Target are not 0xFFFF, use Bus/ * Target to get DevHandle. When Bus/Target are 0xFFFF and DevHandle is * not 0xFFFF, use DevHandle to get Bus/Target. Anything else is * invalid. */ if ((bus == 0xFFFF) && (target == 0xFFFF) && (dev_handle != 0xFFFF)) dh2bt = TRUE; if ((dev_handle == 0xFFFF) && (bus != 0xFFFF) && (target != 0xFFFF)) bt2dh = TRUE; if (!dh2bt && !bt2dh) return (EINVAL); /* * Only handle bus of 0. Make sure target is within range. */ if (bt2dh) { if (bus != 0) return (EINVAL); if (target > sc->max_devices) { mps_dprint(sc, MPS_FAULT, "Target ID is out of range " "for Bus/Target to DevHandle mapping."); return (EINVAL); } dev_handle = sc->mapping_table[target].dev_handle; if (dev_handle) data->DevHandle = dev_handle; } else { bus = 0; target = mps_mapping_get_sas_id_from_handle(sc, dev_handle); data->Bus = bus; data->TargetID = target; } return (0); } static int mps_ioctl(struct cdev *dev, u_long cmd, void *arg, int flag, struct thread *td) { struct mps_softc *sc; struct mps_cfg_page_req *page_req; struct mps_ext_cfg_page_req *ext_page_req; void *mps_page; int error, msleep_ret; mps_page = NULL; sc = dev->si_drv1; page_req = (void *)arg; ext_page_req = (void *)arg; switch (cmd) { case MPSIO_READ_CFG_HEADER: mps_lock(sc); error = mps_user_read_cfg_header(sc, page_req); mps_unlock(sc); break; case MPSIO_READ_CFG_PAGE: mps_page = malloc(page_req->len, M_MPSUSER, M_WAITOK | M_ZERO); if(!mps_page) { mps_printf(sc, "Cannot allocate memory %s %d\n", __func__, __LINE__); return (ENOMEM); } error = copyin(page_req->buf, mps_page, sizeof(MPI2_CONFIG_PAGE_HEADER)); if (error) break; mps_lock(sc); error = mps_user_read_cfg_page(sc, page_req, mps_page); mps_unlock(sc); if (error) break; error = copyout(mps_page, page_req->buf, page_req->len); break; case MPSIO_READ_EXT_CFG_HEADER: mps_lock(sc); error = mps_user_read_extcfg_header(sc, ext_page_req); mps_unlock(sc); break; case MPSIO_READ_EXT_CFG_PAGE: mps_page = malloc(ext_page_req->len, M_MPSUSER, M_WAITOK|M_ZERO); if(!mps_page) { mps_printf(sc, "Cannot allocate memory %s %d\n", __func__, __LINE__); return (ENOMEM); } error = copyin(ext_page_req->buf, mps_page, sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER)); if (error) break; mps_lock(sc); error = mps_user_read_extcfg_page(sc, ext_page_req, mps_page); mps_unlock(sc); if (error) break; error = copyout(mps_page, ext_page_req->buf, ext_page_req->len); break; case MPSIO_WRITE_CFG_PAGE: mps_page = malloc(page_req->len, M_MPSUSER, M_WAITOK|M_ZERO); if(!mps_page) { mps_printf(sc, "Cannot allocate memory %s %d\n", __func__, __LINE__); return (ENOMEM); } error = copyin(page_req->buf, mps_page, page_req->len); if (error) break; mps_lock(sc); error = mps_user_write_cfg_page(sc, page_req, mps_page); mps_unlock(sc); break; case MPSIO_MPS_COMMAND: error = mps_user_command(sc, (struct mps_usr_command *)arg); break; case MPTIOCTL_PASS_THRU: /* * The user has requested to pass through a command to be * executed by the MPT firmware. Call our routine which does * this. Only allow one passthru IOCTL at one time. */ error = mps_user_pass_thru(sc, (mps_pass_thru_t *)arg); break; case MPTIOCTL_GET_ADAPTER_DATA: /* * The user has requested to read adapter data. Call our * routine which does this. */ error = 0; mps_user_get_adapter_data(sc, (mps_adapter_data_t *)arg); break; case MPTIOCTL_GET_PCI_INFO: /* * The user has requested to read pci info. Call * our routine which does this. */ mps_lock(sc); error = 0; mps_user_read_pci_info(sc, (mps_pci_info_t *)arg); mps_unlock(sc); break; case MPTIOCTL_RESET_ADAPTER: mps_lock(sc); sc->port_enable_complete = 0; uint32_t reinit_start = time_uptime; error = mps_reinit(sc); /* Sleep for 300 second. */ msleep_ret = msleep(&sc->port_enable_complete, &sc->mps_mtx, PRIBIO, "mps_porten", 300 * hz); mps_unlock(sc); if (msleep_ret) printf("Port Enable did not complete after Diag " "Reset msleep error %d.\n", msleep_ret); else mps_dprint(sc, MPS_USER, "Hard Reset with Port Enable completed in %d seconds.\n", (uint32_t) (time_uptime - reinit_start)); break; case MPTIOCTL_DIAG_ACTION: /* * The user has done a diag buffer action. Call our routine * which does this. Only allow one diag action at one time. */ mps_lock(sc); error = mps_user_diag_action(sc, (mps_diag_action_t *)arg); mps_unlock(sc); break; case MPTIOCTL_EVENT_QUERY: /* * The user has done an event query. Call our routine which does * this. */ error = 0; mps_user_event_query(sc, (mps_event_query_t *)arg); break; case MPTIOCTL_EVENT_ENABLE: /* * The user has done an event enable. Call our routine which * does this. */ error = 0; mps_user_event_enable(sc, (mps_event_enable_t *)arg); break; case MPTIOCTL_EVENT_REPORT: /* * The user has done an event report. Call our routine which * does this. */ error = mps_user_event_report(sc, (mps_event_report_t *)arg); break; case MPTIOCTL_REG_ACCESS: /* * The user has requested register access. Call our routine * which does this. */ mps_lock(sc); error = mps_user_reg_access(sc, (mps_reg_access_t *)arg); mps_unlock(sc); break; case MPTIOCTL_BTDH_MAPPING: /* * The user has requested to translate a bus/target to a * DevHandle or a DevHandle to a bus/target. Call our routine * which does this. */ error = mps_user_btdh(sc, (mps_btdh_mapping_t *)arg); break; default: error = ENOIOCTL; break; } if (mps_page != NULL) free(mps_page, M_MPSUSER); return (error); } #ifdef COMPAT_FREEBSD32 struct mps_cfg_page_req32 { MPI2_CONFIG_PAGE_HEADER header; uint32_t page_address; uint32_t buf; int len; uint16_t ioc_status; }; struct mps_ext_cfg_page_req32 { MPI2_CONFIG_EXTENDED_PAGE_HEADER header; uint32_t page_address; uint32_t buf; int len; uint16_t ioc_status; }; struct mps_raid_action32 { uint8_t action; uint8_t volume_bus; uint8_t volume_id; uint8_t phys_disk_num; uint32_t action_data_word; uint32_t buf; int len; uint32_t volume_status; uint32_t action_data[4]; uint16_t action_status; uint16_t ioc_status; uint8_t write; }; struct mps_usr_command32 { uint32_t req; uint32_t req_len; uint32_t rpl; uint32_t rpl_len; uint32_t buf; int len; uint32_t flags; }; #define MPSIO_READ_CFG_HEADER32 _IOWR('M', 200, struct mps_cfg_page_req32) #define MPSIO_READ_CFG_PAGE32 _IOWR('M', 201, struct mps_cfg_page_req32) #define MPSIO_READ_EXT_CFG_HEADER32 _IOWR('M', 202, struct mps_ext_cfg_page_req32) #define MPSIO_READ_EXT_CFG_PAGE32 _IOWR('M', 203, struct mps_ext_cfg_page_req32) #define MPSIO_WRITE_CFG_PAGE32 _IOWR('M', 204, struct mps_cfg_page_req32) #define MPSIO_RAID_ACTION32 _IOWR('M', 205, struct mps_raid_action32) #define MPSIO_MPS_COMMAND32 _IOWR('M', 210, struct mps_usr_command32) static int mps_ioctl32(struct cdev *dev, u_long cmd32, void *_arg, int flag, struct thread *td) { struct mps_cfg_page_req32 *page32 = _arg; struct mps_ext_cfg_page_req32 *ext32 = _arg; struct mps_raid_action32 *raid32 = _arg; struct mps_usr_command32 *user32 = _arg; union { struct mps_cfg_page_req page; struct mps_ext_cfg_page_req ext; struct mps_raid_action raid; struct mps_usr_command user; } arg; u_long cmd; int error; switch (cmd32) { case MPSIO_READ_CFG_HEADER32: case MPSIO_READ_CFG_PAGE32: case MPSIO_WRITE_CFG_PAGE32: if (cmd32 == MPSIO_READ_CFG_HEADER32) cmd = MPSIO_READ_CFG_HEADER; else if (cmd32 == MPSIO_READ_CFG_PAGE32) cmd = MPSIO_READ_CFG_PAGE; else cmd = MPSIO_WRITE_CFG_PAGE; CP(*page32, arg.page, header); CP(*page32, arg.page, page_address); PTRIN_CP(*page32, arg.page, buf); CP(*page32, arg.page, len); CP(*page32, arg.page, ioc_status); break; case MPSIO_READ_EXT_CFG_HEADER32: case MPSIO_READ_EXT_CFG_PAGE32: if (cmd32 == MPSIO_READ_EXT_CFG_HEADER32) cmd = MPSIO_READ_EXT_CFG_HEADER; else cmd = MPSIO_READ_EXT_CFG_PAGE; CP(*ext32, arg.ext, header); CP(*ext32, arg.ext, page_address); PTRIN_CP(*ext32, arg.ext, buf); CP(*ext32, arg.ext, len); CP(*ext32, arg.ext, ioc_status); break; case MPSIO_RAID_ACTION32: cmd = MPSIO_RAID_ACTION; CP(*raid32, arg.raid, action); CP(*raid32, arg.raid, volume_bus); CP(*raid32, arg.raid, volume_id); CP(*raid32, arg.raid, phys_disk_num); CP(*raid32, arg.raid, action_data_word); PTRIN_CP(*raid32, arg.raid, buf); CP(*raid32, arg.raid, len); CP(*raid32, arg.raid, volume_status); bcopy(raid32->action_data, arg.raid.action_data, sizeof arg.raid.action_data); CP(*raid32, arg.raid, ioc_status); CP(*raid32, arg.raid, write); break; case MPSIO_MPS_COMMAND32: cmd = MPSIO_MPS_COMMAND; PTRIN_CP(*user32, arg.user, req); CP(*user32, arg.user, req_len); PTRIN_CP(*user32, arg.user, rpl); CP(*user32, arg.user, rpl_len); PTRIN_CP(*user32, arg.user, buf); CP(*user32, arg.user, len); CP(*user32, arg.user, flags); break; default: return (ENOIOCTL); } error = mps_ioctl(dev, cmd, &arg, flag, td); if (error == 0 && (cmd32 & IOC_OUT) != 0) { switch (cmd32) { case MPSIO_READ_CFG_HEADER32: case MPSIO_READ_CFG_PAGE32: case MPSIO_WRITE_CFG_PAGE32: CP(arg.page, *page32, header); CP(arg.page, *page32, page_address); PTROUT_CP(arg.page, *page32, buf); CP(arg.page, *page32, len); CP(arg.page, *page32, ioc_status); break; case MPSIO_READ_EXT_CFG_HEADER32: case MPSIO_READ_EXT_CFG_PAGE32: CP(arg.ext, *ext32, header); CP(arg.ext, *ext32, page_address); PTROUT_CP(arg.ext, *ext32, buf); CP(arg.ext, *ext32, len); CP(arg.ext, *ext32, ioc_status); break; case MPSIO_RAID_ACTION32: CP(arg.raid, *raid32, action); CP(arg.raid, *raid32, volume_bus); CP(arg.raid, *raid32, volume_id); CP(arg.raid, *raid32, phys_disk_num); CP(arg.raid, *raid32, action_data_word); PTROUT_CP(arg.raid, *raid32, buf); CP(arg.raid, *raid32, len); CP(arg.raid, *raid32, volume_status); bcopy(arg.raid.action_data, raid32->action_data, sizeof arg.raid.action_data); CP(arg.raid, *raid32, ioc_status); CP(arg.raid, *raid32, write); break; case MPSIO_MPS_COMMAND32: PTROUT_CP(arg.user, *user32, req); CP(arg.user, *user32, req_len); PTROUT_CP(arg.user, *user32, rpl); CP(arg.user, *user32, rpl_len); PTROUT_CP(arg.user, *user32, buf); CP(arg.user, *user32, len); CP(arg.user, *user32, flags); break; } } return (error); } #endif /* COMPAT_FREEBSD32 */ static int mps_ioctl_devsw(struct cdev *dev, u_long com, caddr_t arg, int flag, struct thread *td) { #ifdef COMPAT_FREEBSD32 if (SV_CURPROC_FLAG(SV_ILP32)) return (mps_ioctl32(dev, com, arg, flag, td)); #endif return (mps_ioctl(dev, com, arg, flag, td)); }