Index: head/sys/arm/conf/ARMADAXP =================================================================== --- head/sys/arm/conf/ARMADAXP (revision 276002) +++ head/sys/arm/conf/ARMADAXP (revision 276003) @@ -1,107 +1,137 @@ # # Custom kernel for Marvell Armada XP # -# $FreeBSD$ +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: # +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD$ ident MV-88F78XX0 include "../mv/armadaxp/std.mv78x60" options SOC_MV_ARMADAXP makeoptions MODULES_OVERRIDE="" -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" +options HZ=1000 #options SCHED_ULE # ULE scheduler options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem -options NFSCL # Network Filesystem Client +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCLIENT -options BOOTP -options BOOTP_NFSROOT -options BOOTP_NFSV3 -options BOOTP_WIRED_TO=mge0 - +options NFS_ROOT # NFS usable as /, requires NFSCL +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme -options GEOM_PART_GPT -options ROOTDEVNAME=\"ufs:/dev/da0p1\" - +options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions -options MUTEX_NOINLINE -options RWLOCK_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -options VFP +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options KBD_INSTALL_CDEV # install a CDEV entry in /dev +options VFP # Enable floating point hardware support +options SMP # Enable multiple cores -options SMP - -# Debugging -#options VERBOSE_SYSINIT +# Debugging for use in -current +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +#options VERBOSE_SYSINIT # Enable verbose sysinit messages options ALT_BREAK_TO_DEBUGGER -options DDB +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: +options DDB # Enable the kernel debugger options GDB -#options DIAGNOSTIC #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS -options KDB -options KDB_TRACE +#options WITNESS # Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +#options WITNESS_KDB +#options DIAGNOSTIC #options KTR #options KTR_VERBOSE=0 #options KTR_ENTRIES=16384 #options KTR_MASK=(KTR_SPARE2) #options KTR_COMPILE=KTR_ALL -#options WITNESS # Enable checks to detect deadlocks and cycles -#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed -#options WITNESS_KDB +# NFS root from boopt/dhcp +options BOOTP +options BOOTP_NFSROOT +options BOOTP_NFSV3 +options BOOTP_WIRED_TO=mge0 + +options ROOTDEVNAME=\"ufs:/dev/da0p1\" + +options MUTEX_NOINLINE +options RWLOCK_NOINLINE +options NO_FFS_SNAPSHOT +options NO_SWAPPING + # Pseudo devices device random device pty device loop device md # USB options USB_DEBUG # enable debug msgs device usb device ehci device umass device scbus device pass device da # SATA device mvs # Serial ports device uart # I2C (TWSI) device iic device iicbus #Network device ether device mge # Marvell Gigabit Ethernet controller device mii device e1000phy device bpf -options HZ=1000 options DEVICE_POLLING device vlan #PCI/PCIE device pci -#FDT -options FDT +# Flattened Device Tree +options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=db78460.dts Index: head/sys/arm/conf/BEAGLEBONE =================================================================== --- head/sys/arm/conf/BEAGLEBONE (revision 276002) +++ head/sys/arm/conf/BEAGLEBONE (revision 276003) @@ -1,153 +1,161 @@ +# # BEAGLEBONE -- Custom configuration for the BeagleBone ARM development # platforms, check out http://www.beagleboard.org/bone and # http://www.beagleboard.org/black. This kernel config file is used for the # original BeagleBone and the BeagleBone Black. # -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident BEAGLEBONE include "../ti/am335x/std.am335x" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options TMPFS # Efficient memory filesystem +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev -options PREEMPTION options PLATFORM -options FREEBSD_BOOT_LOADER -options VFP # vfp/neon +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages -options KDB +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC -# NFS support -options NFSCL +# NFS server support #options NFSD -options NFSLOCKD -# Uncomment this for NFS root -#options NFS_ROOT # NFS usable as /, requires NFSCL +# NFS root from boopt/dhcp +#options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT -#options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 +# Boot device is 2nd slice on MMC/SD card +options ROOTDEVNAME=\"ufs:mmcsd0s2\" + # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c device am335x_pmic # AM335x Power Management IC (TPC65217) -# Boot device is 2nd slice on MMC/SD card -options ROOTDEVNAME=\"ufs:mmcsd0s2\" - # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # GPIO device gpio device gpioled # ADC support device ti_adc # Watchdog support # If we don't enable the watchdog driver, the system could potentially # reboot automatically because the boot loader might have enabled the # watchdog. device ti_wdt # TI Programmable Realtime Unit support device ti_pruss # Mailbox support device ti_mbox # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device musb device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smscphy device cpsw device bpf # USB Ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet # Device mode support and USFS template device usb_template # Control of the gadget device usfs # Flattened Device Tree -options FDT -options FDT_DTB_STATIC -makeoptions FDT_DTS_FILE=beaglebone.dts +options FDT # Configure using FDT/DTB data +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=beaglebone.dts Index: head/sys/arm/conf/CUBIEBOARD =================================================================== --- head/sys/arm/conf/CUBIEBOARD (revision 276002) +++ head/sys/arm/conf/CUBIEBOARD (revision 276003) @@ -1,140 +1,145 @@ +# # CUBIEBOARD -- Custom configuration for the CUBIEBOARD ARM development # platform, check out http://www.cubieboard.org # -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD include "../allwinner/std.a10" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options TMPFS # Efficient memory filesystem +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev -options PREEMPTION -options FREEBSD_BOOT_LOADER -options VFP # vfp/neon +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support -# Debugging +# Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages -options KDB +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC -# NFS support -#options NFSCL -#options NFSSERVER # Network Filesystem Server -#options NFSCLIENT # Network Filesystem Client - -# Uncomment this for NFS root -#options NFS_ROOT # NFS usable as /, requires NFSCLIENT +# NFS root from boopt/dhcp +#options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT -#options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 -# MMC/SD/SDIO card slot support -#device mmc # mmc/sd bus -#device mmcsd # mmc/sd flash cards - # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" +# MMC/SD/SDIO Card slot support +#device mmc # mmc/sd bus +#device mmcsd # mmc/sd flash cards + # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers #options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf device emac # USB ethernet support, requires miibus device miibus # Flattened Device Tree -options FDT +options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard.dts Index: head/sys/arm/conf/CUBIEBOARD2 =================================================================== --- head/sys/arm/conf/CUBIEBOARD2 (revision 276002) +++ head/sys/arm/conf/CUBIEBOARD2 (revision 276003) @@ -1,141 +1,146 @@ +# # CUBIEBOARD2 -- Custom configuration for the CUBIEBOARD2 ARM development # platform, check out http://www.cubieboard.org # -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD2 include "../allwinner/a20/std.a20" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options TMPFS # Efficient memory filesystem +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev -options PREEMPTION -options FREEBSD_BOOT_LOADER -options VFP # vfp/neon +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support +options SMP # Enable multiple cores -# Debugging +# Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages -options KDB +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC -# NFS support -#options NFSCL -#options NFSSERVER # Network Filesystem Server -#options NFSCLIENT # Network Filesystem Client - -# Uncomment this for NFS root -#options NFS_ROOT # NFS usable as /, requires NFSCLIENT +# NFS root from boopt/dhcp +#options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT -#options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 -# MMC/SD/SDIO card slot support -#device mmc # mmc/sd bus -#device mmcsd # mmc/sd flash cards - # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" +# MMC/SD/SDIO Card slot support +#device mmc # mmc/sd bus +#device mmcsd # mmc/sd flash cards + # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers #options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf device emac # USB ethernet support, requires miibus device miibus # Flattened Device Tree -options FDT +options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard2.dts -options SMP # Enable multiple cores Index: head/sys/arm/conf/EFIKA_MX =================================================================== --- head/sys/arm/conf/EFIKA_MX (revision 276002) +++ head/sys/arm/conf/EFIKA_MX (revision 276003) @@ -1,176 +1,180 @@ +# # Kernel configuration for Efika MX Smarttop/Smartbook boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident EFIKA_MX include "../freescale/imx/std.imx51" makeoptions WITHOUT_MODULES="ahc" -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -#options DEBUG - options SCHED_4BSD # 4BSD scheduler -#options PREEMPTION # Enable kernel thread preemption +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking -#options INET6 # IPv6 communications protocols -#options SCTP # Stream Control Transmission Protocol +options INET6 # IPv6 communications protocols +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS #options MD_ROOT # MD is a potential root device options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) +options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme -options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options KBD_INSTALL_CDEV # install a CDEV entry in /dev options INCLUDE_CONFIG_FILE # Include this file in kernel -options VFP # vfp/neon +options VFP # Enable floating point hardware support -# required for netbooting +# Debugging for use in -current +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +options BREAK_TO_DEBUGGER +#options VERBOSE_SYSINIT # Enable verbose sysinit messages +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: +options DDB # Enable the kernel debugger +#options GDB # Support remote GDB +options DEADLKRES # Enable the deadlock resolver +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +options WITNESS # Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed + +# NFS root from boopt/dhcp #options BOOTP -#options BOOTP_COMPAT #options BOOTP_NFSROOT +#options BOOTP_COMPAT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 -# + options ROOTDEVNAME=\"ufs:ada0s2a\" # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE -# Debugging support. Always need this: -options KDB # Enable kernel debugger support. -# For minimum debugger support (stable branch) use: -#options KDB_TRACE # Print a stack trace for a panic. -# For full debugger support use this instead: -options DDB # Support DDB. -#options GDB # Support remote GDB. -options DEADLKRES # Enable the deadlock resolver -options INVARIANTS # Enable calls of extra sanity checking -options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS -options WITNESS # Enable checks to detect deadlocks and cycles - # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER device ata device atapci # Only for helper functions device imxata options ATA_STATIC_ID # Static device numbering device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB Ethernet, requires miibus device miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # Flattened Device Tree -options FDT -options FDT_DTB_STATIC -makeoptions FDT_DTS_FILE=efikamx.dts +options FDT # Configure using FDT/DTB data +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=efikamx.dts # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support device sc device kbdmux options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 device ukbd # Allow keyboard like HIDs to control console device ums Index: head/sys/arm/conf/EXYNOS5.common =================================================================== --- head/sys/arm/conf/EXYNOS5.common (revision 276002) +++ head/sys/arm/conf/EXYNOS5.common (revision 276003) @@ -1,136 +1,139 @@ +# # Kernel configuration for Samsung Exynos 5 SoC. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options HZ=100 options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options GEOM_PART_GPT # GUID partition tables -options TMPFS # Efficient memory filesystem +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem -options SOFTUPDATES +options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -options KTRACE +options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions -options KBD_INSTALL_CDEV -options PREEMPTION -options FREEBSD_BOOT_LOADER -options VFP # vfp/neon +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options KBD_INSTALL_CDEV # install a CDEV entry in /dev +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support +options SMP # Enable multiple cores -options SMP - -# Debugging +# Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER -#options VERBOSE_SYSINIT # Enable verbose sysinit messages -options KDB +#options VERBOSE_SYSINIT # Enable verbose sysinit messages +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS -#options WITNESS # Enable checks to detect deadlocks and cycles -#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +#options WITNESS # Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC -# NFS support -options NFSCL # Network Filesystem Client -options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCLIENT +# NFS root from boopt/dhcp +#options BOOTP +#options BOOTP_NFSROOT +#options BOOTP_COMPAT +#options BOOTP_NFSV3 +#options BOOTP_WIRED_TO=ue0 -# Uncomment this for NFS root -#options NFS_ROOT # NFS usable as /, requires NFSCL -#options BOOTP_NFSROOT -#options BOOTP_COMPAT -#options BOOTP -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=ue0 +options ROOTDEVNAME=\"ufs:/dev/da0\" +# MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device dwmmc - -options ROOTDEVNAME=\"ufs:/dev/da0\" # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device ehci #device ohci device xhci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs # Serial ports device uart # I2C (TWSI) device iic device iicbus # SPI device spibus device exynos_spi # Ethernet device ether device mii device smsc device smscphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter Index: head/sys/arm/conf/IMX53 =================================================================== --- head/sys/arm/conf/IMX53 (revision 276002) +++ head/sys/arm/conf/IMX53 (revision 276003) @@ -1,172 +1,173 @@ +# # Kernel configuration for i.MX53 boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX53 include "../freescale/imx/std.imx53" -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -#options DEBUG - options SCHED_4BSD # 4BSD scheduler -#options PREEMPTION # Enable kernel thread preemption +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols -#options SCTP # Stream Control Transmission Protocol +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling -#options MD_ROOT # MD is a potential root device +options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) +options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme -options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options KBD_INSTALL_CDEV # install a CDEV entry in /dev options INCLUDE_CONFIG_FILE # Include this file in kernel -options VFP # vfp/neon +options VFP # Enable floating point hardware support -# kernel/memory size reduction -#options MUTEX_NOINLINE -#options NO_FFS_SNAPSHOT -#options NO_SWAPPING -#options NO_SYSCTL_DESCR -#options RWLOCK_NOINLINE - -# Debugging support. Always need this: -options KDB # Enable kernel debugger support. +# Debugging for use in -current +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +options KDB # Enable kernel debugger support # For minimum debugger support (stable branch) use: -#options KDB_TRACE # Print a stack trace for a panic. +#options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: -options DDB # Support DDB. -#options GDB # Support remote GDB. +options DDB # Enable the kernel debugger +#options GDB # Support remote GDB options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +# kernel/memory size reduction +#options MUTEX_NOINLINE +#options NO_FFS_SNAPSHOT +#options NO_SWAPPING +#options NO_SYSCTL_DESCR +#options RWLOCK_NOINLINE + # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module # Ethernet device ffec # Freescale Fast Ethernet Controller device miibus # Standard mii bus # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER device ata device atapci # Only for helper functions device imxata options ATA_STATIC_ID # Static device numbering device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ukbd # Allow keyboard like HIDs to control console device ums # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # MMC #device sdhci # SD controller #device mmc # SD/MMC protocol #device mmcsd # SDCard disk device # Flattened Device Tree -options FDT +options FDT # Configure using FDT/DTB data # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support #device sc #device vt #device kbdmux #options SC_DFLT_FONT # compile font in #makeoptions SC_DFLT_FONT=cp437 Index: head/sys/arm/conf/IMX6 =================================================================== --- head/sys/arm/conf/IMX6 (revision 276002) +++ head/sys/arm/conf/IMX6 (revision 276003) @@ -1,159 +1,162 @@ +# # Kernel configuration for Freescale i.MX6 systems. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX6 include "../freescale/imx/std.imx6" -options HZ=500 # Scheduling quantum is 2 milliseconds. +options HZ=500 # Scheduling quantum is 2 milliseconds. options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling -#options MD_ROOT # MD is a potential root device +options QUOTA # Enable disk quotas for UFS options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL -options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem -#options PROCFS # Process filesystem (requires PSEUDOFS) +options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme -options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options KBD_INSTALL_CDEV # install a CDEV entry in /dev options INCLUDE_CONFIG_FILE # Include this file in kernel +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support +options SMP # Enable multiple cores -# Debugging support. Always need this: -options KDB # Enable kernel debugger support. -# For minimum debugger support use KDB_TRACE, for interactive use DDB. -#options KDB_TRACE # Print a stack trace for a panic. -options DDB # Support DDB. +# Debugging for use in -current +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic # For full debugger support use this instead: +options DDB # Enable the kernel debugger #options GDB # Support remote GDB. # Other debugging options... -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options ALT_BREAK_TO_DEBUGGER # Use to enter debugger. -#options DEBUG #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +#options DIAGNOSTIC +# NFS root from boopt/dhcp +#options BOOTP +#options BOOTP_NFSROOT +#options BOOTP_COMPAT +#options BOOTP_NFSV3 +#options BOOTP_WIRED_TO=ffec0 + +# U-Boot stuff lives on slice 1, FreeBSD on slice 2. +options ROOTDEVNAME=\"ufs:mmcsd0s2a\" + # Pseudo devices. device loop # Network loopback device random # Entropy device device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device firmware # firmware assist module device ether # Ethernet support device miibus # Required for ethernet device bpf # Berkeley packet filter (required for DHCP) # General-purpose input/output device gpio # Serial (COM) ports device uart # Multi-uart driver # SDCard device sdhci # SD controller device mmc # SD/MMC protocol device mmcsd # SDCard disk device # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) # USB support #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB modems #device ukbd # Allow keyboard like HIDs to control console #device ums # USB mouse # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support # Wandboard has no video console support yet. #device sc #device kbdmux #options SC_DFLT_FONT # compile font in #makeoptions SC_DFLT_FONT=cp437 -# required for netbooting -#options BOOTP -#options BOOTP_COMPAT -#options BOOTP_NFSROOT -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=ffec0 - -# U-Boot stuff lives on slice 1, FreeBSD on slice 2. -options ROOTDEVNAME=\"ufs:mmcsd0s2a\" - -# ARM and SoC-specific options -options FDT # Configure using FDT/DTB data. -options SMP # Enable multiple cores -options VFP # Enable floating point hardware support -options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +# Flattened Device Tree +options FDT # Configure using FDT/DTB data # SoC-specific devices device ffec # Freescale Fast Ethernet Controller device fsliic # Freescale i2c/iic device iic # iic protocol device iicbus # iic bus #device imxwdt # Watchdog. WARNING: can't be disabled!!! Index: head/sys/arm/conf/PANDABOARD =================================================================== --- head/sys/arm/conf/PANDABOARD (revision 276002) +++ head/sys/arm/conf/PANDABOARD (revision 276003) @@ -1,151 +1,157 @@ +# # PANDABOARD -- Custom configuration for the PandaBoard ARM development # platform, check out www.pandaboard.org # -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident PANDABOARD # This probably wants to move somewhere else. Maybe we can create a basic # OMAP4340 config, then make a PANDABOARD config that includes the basic one, # adds the start addresses and custom devices plus pulls in this hints file. hints "PANDABOARD.hints" include "../ti/omap4/pandaboard/std.pandaboard" -#To statically compile in device wiring instead of /boot/device.hints makeoptions MODULES_OVERRIDE="" -makeoptions WITHOUT_MODULES="ahc" +makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options TMPFS # Efficient memory filesystem +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev -options PREEMPTION options PLATFORM -options FREEBSD_BOOT_LOADER -options VFP # vfp/neon -options SMP # Enable multiple cores +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support +options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages -options KDB +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC -# NFS support -options NFSCL - -# NFS root -options NFS_ROOT # NFS usable as /, requires NFSCLIENT +# NFS root from boopt/dhcp +#options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT -#options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device device pl310 # PL310 L2 cache controller # GPIO device gpio # The following enables MFS as root, this seems similar to an initramfs or initrd # as used in Linux. #options MD_ROOT #options MD_ROOT_SIZE=7560 # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device ohci device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smc device smcphy device bpf # USB Ethernet support, requires miibus device miibus #device axe # ASIX Electronics USB Ethernet device smsc # SMSC LAN95xx USB Ethernet # OMAP-specific devices device ti_sdma device twl device twl_vreg device twl_clks # Flattened Device Tree -options FDT -options FDT_DTB_STATIC -makeoptions FDT_DTS_FILE=pandaboard.dts +options FDT # Configure using FDT/DTB data +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=pandaboard.dts Index: head/sys/arm/conf/RK3188 =================================================================== --- head/sys/arm/conf/RK3188 (revision 276002) +++ head/sys/arm/conf/RK3188 (revision 276003) @@ -1,128 +1,135 @@ +# # Kernel configuration for Rockchip RK3188 systems. # -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident RK3188 include "../rockchip/std.rk30xx" options HZ=100 options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options TMPFS # Efficient memory filesystem +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev -options PREEMPTION -options FREEBSD_BOOT_LOADER -options VFP # vfp/neon -options SMP # Enable multiple cores +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support +options SMP # Enable multiple cores -# Debugging +# Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER -#options VERBOSE_SYSINIT # Enable verbose sysinit messages -options KDB +#options VERBOSE_SYSINIT # Enable verbose sysinit messages +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: options DDB # Enable the kernel debugger -#options INVARIANTS # Enable calls of extra sanity checking -#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +#options INVARIANTS # Enable calls of extra sanity checking +#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options DIAGNOSTIC -# NFS support -#options NFSCL -#options NFSSERVER # Network Filesystem Server -#options NFSCLIENT # Network Filesystem Client +# Boot device is 2nd slice on USB +options ROOTDEVNAME=\"ufs:/dev/da0s2\" -# MMC/SD/SDIO card slot support +# MMC/SD/SDIO Card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards -# Boot device is 2nd slice on USB -options ROOTDEVNAME=\"ufs:/dev/da0s2\" - # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. device usb options USB_DEBUG -#options USB_REQ_DEBUG -#options USB_VERBOSE +#options USB_REQ_DEBUG +#options USB_VERBOSE device dwcotg # DWC OTG controller device umass # Ethernet device loop device ether device mii device bpf # Wireless NIC cards options IEEE80211_DEBUG options IEEE80211_AMPDU_AGE options IEEE80211_SUPPORT_MESH options IEEE80211_SUPPORT_TDMA device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device urtwn device urtwnfw device firmware # Used by the above -# USB ethernet support, requires miibus +# USB Ethernet support, requires miibus device miibus device udav -options FDT # Configure using FDT/DTB data. +# Flattened Device Tree +options FDT # Configure using FDT/DTB data Index: head/sys/arm/conf/RPI-B =================================================================== --- head/sys/arm/conf/RPI-B (revision 276002) +++ head/sys/arm/conf/RPI-B (revision 276003) @@ -1,123 +1,136 @@ +# # RPI-B -- Custom configuration for the Raspberry Pi # -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident RPI-B include "../broadcom/bcm2835/std.rpi" -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options HZ=100 - options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options TMPFS # Efficient memory filesystem +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem -device snp - -options NFSCL # Network Filesystem Client - -#options NFS_ROOT # NFS usable as /, requires NFSCLIENT -#options BOOTP_NFSROOT -#options BOOTP_COMPAT -#options BOOTP -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=ue0 - +options CD9660 # ISO 9660 Filesystem +options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev -#options ROOTDEVNAME=\"ufs:mmcsd0s2\" - -options PREEMPTION options PLATFORM +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support +# Debugging for use in -current +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +options BREAK_TO_DEBUGGER +#options VERBOSE_SYSINIT # Enable verbose sysinit messages +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: +options DDB # Enable the kernel debugger +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +#options WITNESS # Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +#options DIAGNOSTIC + +# NFS root from boopt/dhcp +#options BOOTP +#options BOOTP_NFSROOT +#options BOOTP_COMPAT +#options BOOTP_NFSV3 +#options BOOTP_WIRED_TO=ue0 + +#options ROOTDEVNAME=\"ufs:mmcsd0s2\" + device bpf device loop device ether device uart +device pty +device snp device pl011 -device pty - # Comment following lines for boot console on serial port device vt device kbdmux device ukbd device sdhci device mmc device mmcsd device gpio device gpioled # I2C device iic device iicbus device bcm2835_bsc -options KDB -options DDB # Enable the kernel debugger -options INVARIANTS # Enable calls of extra sanity checking -options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS - device md device random # Entropy device # USB support device usb options USB_DEBUG device dwcotg # DWC OTG controller # USB storage support device scbus device da device umass # USB ethernet support device smcphy device mii device smsc # SPI device spibus device bcm2835_spi # Flattened Device Tree -options FDT +options FDT # Configure using FDT/DTB data # Note: DTB is normally loaded and modified by RPi boot loader, then # handed to kernel via U-Boot and ubldr. -#options FDT_DTB_STATIC -makeoptions FDT_DTS_FILE=rpi.dts - -options VFP # vfp/neon +#options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=rpi.dts Index: head/sys/arm/conf/SOCKIT =================================================================== --- head/sys/arm/conf/SOCKIT (revision 276002) +++ head/sys/arm/conf/SOCKIT (revision 276003) @@ -1,138 +1,141 @@ +# # Kernel configuration for Terasic SoCKit (Altera Cyclone V SoC). # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident SOCKIT include "../altera/socfpga/std.socfpga" makeoptions MODULES_OVERRIDE="" -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options HZ=100 options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options GEOM_PART_GPT # GUID partition tables -options TMPFS # Efficient memory filesystem +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem -options SOFTUPDATES +options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -options KTRACE +options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions -options KBD_INSTALL_CDEV -options PREEMPTION -options FREEBSD_BOOT_LOADER -options VFP # vfp/neon +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options KBD_INSTALL_CDEV # install a CDEV entry in /dev +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support +options SMP # Enable multiple cores -options SMP - -# Debugging +# Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages -options KDB +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC -# NFS support -options NFSCL # Network Filesystem Client -options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCLIENT - -# Uncomment this for NFS root -#options NFS_ROOT # NFS usable as /, requires NFSCL +# NFS root from boopt/dhcp +#options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT -#options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 +options ROOTDEVNAME=\"ufs:/dev/da0\" + +# MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device dwmmc -options ROOTDEVNAME=\"ufs:/dev/da0\" - # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device dwcotg device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # Serial ports device uart device uart_ns8250 # I2C (TWSI) device iic device iicbus # SPI device spibus # Ethernet device ether device mii device smsc device smscphy device dwc device micphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter -#FDT -options FDT +# Flattened Device Tree +options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=socfpga-sockit.dts Index: head/sys/arm/conf/SOCKIT-BERI =================================================================== --- head/sys/arm/conf/SOCKIT-BERI (revision 276002) +++ head/sys/arm/conf/SOCKIT-BERI (revision 276003) @@ -1,145 +1,148 @@ +# # Kernel configuration for Terasic SoCKit (Altera Cyclone V SoC). # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident SOCKIT-BERI include "../altera/socfpga/std.socfpga" makeoptions MODULES_OVERRIDE="" -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options HZ=100 options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options GEOM_PART_GPT # GUID partition tables -options TMPFS # Efficient memory filesystem +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem -options SOFTUPDATES +options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -options KTRACE +options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions -options KBD_INSTALL_CDEV -options PREEMPTION -options FREEBSD_BOOT_LOADER -options VFP # vfp/neon +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options KBD_INSTALL_CDEV # install a CDEV entry in /dev +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support +options SMP # Enable multiple cores -options SMP - -# Debugging +# Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages -options KDB +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC -# NFS support -options NFSCL # Network Filesystem Client -options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCLIENT - -# Uncomment this for NFS root -#options NFS_ROOT # NFS usable as /, requires NFSCL +# NFS root from boopt/dhcp +#options BOOTP #options BOOTP_NFSROOT #options BOOTP_COMPAT -#options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 +options ROOTDEVNAME=\"ufs:/dev/mmcsd0s4\" + +# MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device dwmmc -options ROOTDEVNAME=\"ufs:/dev/mmcsd0s4\" - # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device dwcotg device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # Serial ports device uart device uart_ns8250 # I2C (TWSI) device iic device iicbus # SPI device spibus # BERI specific device beri_ring device beri_mem device beri_vtblk device vtbe device altera_pio # Ethernet device ether device mii device smsc device smscphy device dwc device micphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter -#FDT -options FDT +# Flattened Device Tree +options FDT # Configure using FDT/DTB data options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=socfpga-sockit-beri.dts Index: head/sys/arm/conf/VERSATILEPB =================================================================== --- head/sys/arm/conf/VERSATILEPB (revision 276002) +++ head/sys/arm/conf/VERSATILEPB (revision 276003) @@ -1,104 +1,118 @@ +# # VERSATILEPB - Configuration for QEMU version of Versatile Platform Board # -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident VERSATILEPB machine arm armv6 cpu CPU_ARM1176 files "../versatile/files.versatile" makeoptions MODULES_OVERRIDE="" options KERNVIRTADDR=0xc0100000 makeoptions KERNVIRTADDR=0xc0100000 options KERNPHYSADDR=0x00100000 makeoptions KERNPHYSADDR=0x00100000 options PHYSADDR=0x00000000 -options FREEBSD_BOOT_LOADER -options LINUX_BOOT_ABI -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options HZ=100 - options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking +options INET6 # IPv6 communications protocols +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories -device snp - +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL +options MSDOSFS # MSDOS Filesystem +options CD9660 # ISO 9660 Filesystem +options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme -options TMPFS # Efficient memory filesystem -options PSEUDOFS # Pseudo-filesystem framework options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev -options ROOTDEVNAME=\"ufs:da0s1a\" -options VFP # vfp/neon +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options LINUX_BOOT_ABI # Process metadata passed from Linux boot loaders +options VFP # Enable floating point hardware support -options PREEMPTION +# Debugging for use in -current +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: +options DDB # Enable the kernel debugger +options INVARIANTS # Enable calls of extra sanity checking +options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +options ROOTDEVNAME=\"ufs:da0s1a\" + device bpf device loop device mii device mii_bitbang device smc device smcphy device ether device uart device pl011 device pl190 device pty +device snp device pci # SCSI Controllers device sym # NCR/Symbios/LSI Logic 53C8XX/53C1010/53C1510D # ATA/SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # Passthrough device (direct ATA/SCSI access) # NOTE: serial console is disabled if syscons enabled # Comment following lines for headless setup device sc device kbdmux options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 -options KDB -options DDB # Enable the kernel debugger -options INVARIANTS # Enable calls of extra sanity checking -options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS - device md device random # Entropy device # Flattened Device Tree -options FDT -options FDT_DTB_STATIC -makeoptions FDT_DTS_FILE=versatilepb.dts +options FDT # Configure using FDT/DTB data +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=versatilepb.dts Index: head/sys/arm/conf/VYBRID =================================================================== --- head/sys/arm/conf/VYBRID (revision 276002) +++ head/sys/arm/conf/VYBRID (revision 276003) @@ -1,153 +1,159 @@ +# # Kernel configuration for Vybrid Family boards. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident VYBRID include "../freescale/vybrid/std.vybrid" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options HZ=100 options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem -options SOFTUPDATES +options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options TMPFS # Efficient memory filesystem +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem +#options NANDFS # NAND Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework -#options NANDFS # NAND Filesystem +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -options KTRACE +options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions -options KBD_INSTALL_CDEV -options PREEMPTION -options FREEBSD_BOOT_LOADER -options MUTEX_NOINLINE -options RWLOCK_NOINLINE -options NO_FFS_SNAPSHOT -options NO_SWAPPING -options VFP # vfp/neon +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options KBD_INSTALL_CDEV # install a CDEV entry in /dev +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support +#options SMP # Enable multiple cores -# Debugging +# Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER -#options VERBOSE_SYSINIT # Enable verbose sysinit messages -options KDB +#options VERBOSE_SYSINIT # Enable verbose sysinit messages +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: options DDB # Enable the kernel debugger -#options INVARIANTS # Enable calls of extra sanity checking -#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS -#options WITNESS # Enable checks to detect deadlocks and cycles -#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed -#options DIAGNOSTIC +#options INVARIANTS # Enable calls of extra sanity checking +#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +#options WITNESS # Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +#options DIAGNOSTIC -# NFS support -options NFSCL # Network Filesystem Client -options NFSLOCKD # Network Lock Manager -options NFS_ROOT # NFS usable as /, requires NFSCLIENT +# NFS root from boopt/dhcp +#options BOOTP +#options BOOTP_NFSROOT +#options BOOTP_COMPAT +#options BOOTP_NFSV3 +#options BOOTP_WIRED_TO=ffec0 -# Uncomment this for NFS root -#options NFS_ROOT # NFS usable as /, requires NFSCL -#options BOOTP_NFSROOT -#options BOOTP_COMPAT -#options BOOTP -#options BOOTP_NFSV3 -#options BOOTP_WIRED_TO=ffec0 - -device mmc # mmc/sd bus -device mmcsd # mmc/sd flash cards -device sdhci # generic sdhci - #options ROOTDEVNAME=\"nfs:10.5.0.1:/tftpboot/cosmic\" #options ROOTDEVNAME=\"nandfs:/dev/gnand0s.root\" options ROOTDEVNAME=\"ufs:/dev/da0\" -#options SMP +options MUTEX_NOINLINE +options RWLOCK_NOINLINE +options NO_FFS_SNAPSHOT +options NO_SWAPPING +# MMC/SD/SDIO Card slot support +device mmc # mmc/sd bus +device mmcsd # mmc/sd flash cards +device sdhci # generic sdhci + # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device ehci #device ohci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs device nand # Serial ports device uart # I2C (TWSI) device iic device iicbus # Ethernet device ether device ffec # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter device sound # SPI device spibus device vf_spi # Framebuffer device vt device kbdmux device ukbd -options FDT +# Flattened Device Tree +options FDT # Configure using FDT/DTB data Index: head/sys/arm/conf/ZEDBOARD =================================================================== --- head/sys/arm/conf/ZEDBOARD (revision 276002) +++ head/sys/arm/conf/ZEDBOARD (revision 276003) @@ -1,104 +1,117 @@ +# # ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based # ZedBoard (www.zedboard.org) -# -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: -# +# +# For more information on this file, please read the config(5) manual page, +# and/or the handbook section on Kernel Configuration Files: +# # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# +# # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. -# +# # An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. -# +# # $FreeBSD$ ident ZEDBOARD -include "../xilinx/zedboard/std.zedboard" +include "../xilinx/zedboard/std.zedboard" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols +options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories -# options ROOTDEVNAME=\"ufs:mmcsd0s2a\" - -options NFSCL # Network Filesystem Client -# options NFSSD # Network Filesystem Server -# options NFSLOCKD # Network Lock Manager -# options NFS_ROOT # NFS usable as /, requires NFSCL -# options BOOTP_NFSROOT -# options BOOTP - -options GEOM_PART_BSD # BSD partition scheme -options GEOM_PART_MBR # MBR partition scheme -options TMPFS # Efficient memory filesystem +options UFS_GJOURNAL # Enable gjournal-based UFS journaling +options QUOTA # Enable disk quotas for UFS +options NFSCL # New Network Filesystem Client +#options NFSSD # Network Filesystem Server +options NFSLOCKD # Network Lock Manager +options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework +options TMPFS # Efficient memory filesystem +options GEOM_PART_GPT # GUID Partition Tables +options GEOM_PART_BSD # BSD partition scheme +options GEOM_PART_MBR # MBR partition scheme options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions -options FREEBSD_BOOT_LOADER -options VFP # vfp/neon -options SMP # Symmetric MultiProcessor Kernel +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options KBD_INSTALL_CDEV # install a CDEV entry in /dev +options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) +options VFP # Enable floating point hardware support +options SMP # Enable multiple cores -# Debugging +# Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols -options DDB -options KDB -# options BREAK_TO_DEBUGGER +#options BREAK_TO_DEBUGGER +options KDB # Enable kernel debugger support +# For minimum debugger support (stable branch) use: +#options KDB_TRACE # Print a stack trace for a panic +# For full debugger support use this instead: +options DDB # Enable the kernel debugger +#options INVARIANTS # Enable calls of extra sanity checking +#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS +#options WITNESS # Enable checks to detect deadlocks and cycles +#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +#options DIAGNOSTIC -# options INVARIANTS # Enable calls of extra sanity checking -# options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS -# options WITNESS # Enable checks to detect deadlocks and cycles -# options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed +# NFS root from boopt/dhcp +#options BOOTP +#options BOOTP_NFSROOT +#options BOOTP_COMPAT +#options BOOTP_NFSV3 +options ROOTDEVNAME=\"ufs:mmcsd0s2a\" + device loop device random device ether device cgem # Zynq-7000 gig ethernet device device mii device e1000phy device pty device uart device gpio device md device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci device bpf # Berkeley packet filter # USB support device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device ehci device umass device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device axe # USB-Ethernet # Flattened Device Tree -options FDT -# options FDT_DTB_STATIC -# makeoptions FDT_DTS_FILE=zedboard.dts +options FDT # Configure using FDT/DTB data +#options FDT_DTB_STATIC +#makeoptions FDT_DTS_FILE=zedboard.dts