Index: head/sys/boot/fdt/dts/mips/beripad-sockit.dts =================================================================== --- head/sys/boot/fdt/dts/mips/beripad-sockit.dts (nonexistent) +++ head/sys/boot/fdt/dts/mips/beripad-sockit.dts (revision 275861) @@ -0,0 +1,219 @@ +/*- + * Copyright (c) 2012-2013 Robert N. M. Watson + * Copyright (c) 2013-2014 SRI International + * Copyright (c) 2014 Ruslan Bukin + * All rights reserved. + * + * This software was developed by SRI International and the University of + * Cambridge Computer Laboratory under DARPA/AFRL contract (FA8750-10-C-0237) + * ("CTSRD"), as part of the DARPA CRASH research programme. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $FreeBSD$ + */ + +/dts-v1/; + +/* + * Device names here have been largely made up on the spot, especially for the + * "compatible" strings, and might want to be revised. + */ + +/ { + model = "SRI/Cambridge BeriPad (SoCKit)"; + compatible = "sri-cambridge,beripad-sockit"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <1>; + + /* + * Secondary CPUs all start disabled and use the + * spin-table enable method. cpu-release-addr must be + * specified for each cpu other than cpu@0. Values of + * cpu-release-addr grow down from 0x100000 (kernel). + */ + status = "disabled"; + enable-method = "spin-table"; + + cpu@0 { + device-type = "cpu"; + compatible = "sri-cambridge,beri"; + + reg = <0 1>; + status = "okay"; + }; + +/* + cpu@1 { + device-type = "cpu"; + compatible = "sri-cambridge,beri"; + + reg = <1 1>; + // XXX: should we need cached prefix? + cpu-release-addr = <0xffffffff 0x800fffe0>; + }; +*/ + }; + + memory { + device_type = "memory"; + reg = <0x0 0x10000000>; /* 256MB at 0x0 */ + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + #interrupt-cells = <1>; + + /* + * Declare mips,mips4k since BERI doesn't (yet) have a PIC, so + * we use mips4k coprocessor 0 interrupt management directly. + */ + compatible = "simple-bus", "mips,mips4k"; + /* ranges = <>; */ + + beripic0: beripic@7f804000 { + compatible = "sri-cambridge,beri-pic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x0 0x7f804000 0x0 0x400 + 0x0 0x7f806000 0x0 0x10 + 0x0 0x7f806080 0x0 0x10 + 0x0 0x7f806100 0x0 0x10>; + interrupts = <0 1 2 3 4>; + hard-interrupt-sources = <64>; + soft-interrupt-sources = <64>; + }; + + pio0: pio@7f020000 { + compatible = "altr,pio"; + reg = <0x0 0x7f020000 0x0 0x1000>; /* send */ + interrupts = <4>; /* not used */ + interrupt-parent = <&beripic0>; + }; + + pio1: pio@7f021000 { + compatible = "altr,pio"; + reg = <0x0 0x7f021000 0x0 0x1000>; /* recv */ + interrupts = <10>; + interrupt-parent = <&beripic0>; + }; + + pio2: pio@7f022000 { + compatible = "altr,pio"; + reg = <0x0 0x7f022000 0x0 0x1000>; /* send */ + interrupts = <5>; /* not used */ + interrupt-parent = <&beripic0>; + }; + + pio3: pio@7f023000 { + compatible = "altr,pio"; + reg = <0x0 0x7f023000 0x0 0x1000>; /* recv */ + interrupts = <11>; + interrupt-parent = <&beripic0>; + }; + + virtio_mmio_platform0: virtio_mmio_platform@0 { + compatible = "beri,virtio_mmio_platform"; + pio-send = <&pio0>; + pio-recv = <&pio1>; + }; + + virtio_mmio_platform1: virtio_mmio_platform@1 { + compatible = "beri,virtio_mmio_platform"; + pio-send = <&pio2>; + pio-recv = <&pio3>; + }; + + virtio_block@200001000 { + compatible = "virtio,mmio"; + reg = <0x2 0x1000 0x0 0x1000>; + platform = <&virtio_mmio_platform0>; + status = "okay"; + }; + + virtio_net@200002000 { + compatible = "virtio,mmio"; + reg = <0x2 0x2000 0x0 0x1000>; + platform = <&virtio_mmio_platform1>; + status = "okay"; + }; + + serial@7f000000 { + compatible = "altera,jtag_uart-11_0"; + reg = <0x0 0x7f000000 0x0 0x40>; + interrupts = <0>; + interrupt-parent = <&beripic0>; + }; + +/* + serial@7f001000 { + compatible = "altera,jtag_uart-11_0"; + reg = <0x7f001000 0x40>; + }; + + serial@7f002000 { + compatible = "altera,jtag_uart-11_0"; + reg = <0x7f002000 0x40>; + }; +*/ + +/* + led@7f006000 { + compatible = "sri-cambridge,de4led"; + reg = <0x7f006000 0x1>; + }; +*/ + +/* + avgen@0x7f009000 { + compatible = "sri-cambridge,avgen"; + reg = <0x7f009000 0x2>; + sri-cambridge,width = <1>; + sri-cambridge,fileio = "r"; + sri-cambridge,devname = "de4bsw"; + }; +*/ + +/* + berirom@0x7f00a000 { + compatible = "sri-cambridge,berirom"; + reg = <0x7f00a000 0x1000>; + }; +*/ + +/* + avgen@0x7f00c000 { + compatible = "sri-cambridge,avgen"; + reg = <0x7f00c000 0x8>; + sri-cambridge,width = <4>; + sri-cambridge,fileio = "rw"; + sri-cambridge,devname = "de4tempfan"; + }; +*/ + }; +}; Property changes on: head/sys/boot/fdt/dts/mips/beripad-sockit.dts ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property Index: head/sys/mips/beri/files.beri =================================================================== --- head/sys/mips/beri/files.beri (revision 275860) +++ head/sys/mips/beri/files.beri (revision 275861) @@ -1,27 +1,28 @@ # $FreeBSD$ dev/altera/atse/if_atse.c optional altera_atse dev/altera/atse/if_atse_fdt.c optional altera_atse fdt dev/altera/atse/if_atse_nexus.c optional altera_atse dev/altera/jtag_uart/altera_jtag_uart_cons.c optional altera_jtag_uart dev/altera/jtag_uart/altera_jtag_uart_tty.c optional altera_jtag_uart dev/altera/jtag_uart/altera_jtag_uart_fdt.c optional altera_jtag_uart fdt dev/altera/jtag_uart/altera_jtag_uart_nexus.c optional altera_jtag_uart +dev/beri/virtio/virtio_mmio_platform.c optional virtio_mmio dev/netfpga10g/nf10bmac/if_nf10bmac_fdt.c optional netfpga10g_nf10bmac fdt dev/netfpga10g/nf10bmac/if_nf10bmac.c optional netfpga10g_nf10bmac dev/terasic/de4led/terasic_de4led.c optional terasic_de4led dev/terasic/de4led/terasic_de4led_fdt.c optional terasic_de4led fdt dev/terasic/de4led/terasic_de4led_nexus.c optional terasic_de4led dev/terasic/mtl/terasic_mtl.c optional terasic_mtl dev/terasic/mtl/terasic_mtl_fdt.c optional terasic_mtl fdt dev/terasic/mtl/terasic_mtl_nexus.c optional terasic_mtl dev/terasic/mtl/terasic_mtl_pixel.c optional terasic_mtl dev/terasic/mtl/terasic_mtl_reg.c optional terasic_mtl dev/terasic/mtl/terasic_mtl_syscons.c optional terasic_mtl sc dev/terasic/mtl/terasic_mtl_text.c optional terasic_mtl dev/terasic/mtl/terasic_mtl_vt.c optional terasic_mtl vt mips/beri/beri_machdep.c standard mips/beri/beri_pic.c optional fdt mips/beri/beri_simplebus.c optional fdt mips/beri/fdt_ic_if.m optional fdt mips/mips/intr_machdep.c standard mips/mips/tick.c standard Index: head/sys/mips/conf/BERI_SOCKIT =================================================================== --- head/sys/mips/conf/BERI_SOCKIT (nonexistent) +++ head/sys/mips/conf/BERI_SOCKIT (revision 275861) @@ -0,0 +1,26 @@ +# +# BERI_SOCKIT -- Kernel for the SRI/Cambridge "BERI" (Bluespec Extensible +# RISC Implementation) FPGA soft core, as configured in its Terasic SoCKit +# reference configuration. This kernel configration must be further +# specialized to to include a root filesystem specification. +# +# $FreeBSD$ +# + +include "BERI_TEMPLATE" + +ident BERI_SOCKIT + +options ROOTDEVNAME=\"ufs:vtbd0\" + +device altera_pio +device altera_jtag_uart + +device virtio +device virtio_blk +device vtnet +device virtio_mmio + +options FDT +options FDT_DTB_STATIC +makeoptions FDT_DTS_FILE=beripad-sockit.dts Property changes on: head/sys/mips/conf/BERI_SOCKIT ___________________________________________________________________ Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +FreeBSD=%H \ No newline at end of property Added: svn:mime-type ## -0,0 +1 ## +text/plain \ No newline at end of property