Index: head/sys/arm/conf/BEAGLEBONE =================================================================== --- head/sys/arm/conf/BEAGLEBONE (revision 270911) +++ head/sys/arm/conf/BEAGLEBONE (revision 270912) @@ -1,141 +1,141 @@ # BEAGLEBONE -- Custom configuration for the BeagleBone ARM development # platforms, check out http://www.beagleboard.org/bone and # http://www.beagleboard.org/black. This kernel config file is used for the # original BeagleBone and the BeagleBone Black. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident BEAGLEBONE include "../ti/am335x/std.beaglebone" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PREEMPTION options PLATFORM options FREEBSD_BOOT_LOADER options VFP # vfp/neon # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS support options NFSCL #options NFSD options NFSLOCKD # Uncomment this for NFS root #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c device am335x_pmic # AM335x Power Management IC (TPC65217) # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:mmcsd0s2\" # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # GPIO device gpio device gpioled # ADC support device ti_adc # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device musb device umass -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smscphy device cpsw device bpf # USB Ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet # Device mode support and USFS template device usb_template # Control of the gadget device usfs # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=beaglebone.dts Index: head/sys/arm/conf/CNS11XXNAS =================================================================== --- head/sys/arm/conf/CNS11XXNAS (revision 270911) +++ head/sys/arm/conf/CNS11XXNAS (revision 270912) @@ -1,125 +1,125 @@ # CNS11XXNAS - StarSemi STR9104/Cavium CNS1102 NAS # kernel configuration file for FreeBSD/arm # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CNS11XXNAS #options PHYSADDR=0x10000000 #options KERNPHYSADDR=0x10200000 #options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm #options FLASHADDR=0x50000000 #options LOADERRAMADDR=0x00000000 include "../cavium/cns11xx/std.econa" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options HZ=100 options DEVICE_POLLING # Debugging for use in -current options KDB #options GDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles ##options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC #options COMPAT_FREEBSD5 #options COMPAT_FREEBSD6 #options COMPAT_FREEBSD7n options SCHED_ULE # ULE scheduler #options SCHED_4BSD # 4BSD scheduler options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID Partition Tables. #options GEOM_PART_EBR #options GEOM_PART_EBR_COMPAT options GEOM_LABEL # Provides labelization options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server #options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options MUTEX_NOINLINE # Mutex inlines are space hogs options RWLOCK_NOINLINE # rwlock inlines are space hogs options SX_NOINLINE # sx inliens are space hogs #options BOOTP #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=npe0 #options BOOTP_COMPAT #device pci device uart device firmware device mii # Minimal mii routines device ether device bpf device loop device md device random # Entropy device device usb #options USB_DEBUG device ohci device ehci device umass -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass device cfi #device udav # Davicom DM9601E USB device geom_label device geom_journal device geom_part_bsd options ROOTDEVNAME=\"ufs:da0s1a\" Index: head/sys/arm/conf/CUBIEBOARD =================================================================== --- head/sys/arm/conf/CUBIEBOARD (revision 270911) +++ head/sys/arm/conf/CUBIEBOARD (revision 270912) @@ -1,140 +1,140 @@ # CUBIEBOARD -- Custom configuration for the CUBIEBOARD ARM development # platform, check out http://www.cubieboard.org # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD include "../allwinner/std.a10" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PREEMPTION options FREEBSD_BOOT_LOADER options VFP # vfp/neon # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS support #options NFSCL #options NFSSERVER # Network Filesystem Server #options NFSCLIENT # Network Filesystem Client # Uncomment this for NFS root #options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # MMC/SD/SDIO card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers #options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf device emac # USB ethernet support, requires miibus device miibus # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard.dts Index: head/sys/arm/conf/CUBIEBOARD2 =================================================================== --- head/sys/arm/conf/CUBIEBOARD2 (revision 270911) +++ head/sys/arm/conf/CUBIEBOARD2 (revision 270912) @@ -1,141 +1,141 @@ # CUBIEBOARD2 -- Custom configuration for the CUBIEBOARD2 ARM development # platform, check out http://www.cubieboard.org # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident CUBIEBOARD2 include "../allwinner/a20/std.a20" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PREEMPTION options FREEBSD_BOOT_LOADER options VFP # vfp/neon # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB options DDB # Enable the kernel debugger options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS support #options NFSCL #options NFSSERVER # Network Filesystem Server #options NFSCLIENT # Network Filesystem Client # Uncomment this for NFS root #options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=cpsw0 # MMC/SD/SDIO card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # Boot device is 2nd slice on MMC/SD card options ROOTDEVNAME=\"ufs:/dev/da0s2\" # ATA controllers #device ahci # AHCI-compatible SATA controllers #device ata # Legacy ATA/SATA controllers #options ATA_STATIC_ID # Static device numbering # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device uhci #device ohci device ehci device umass # Ethernet device loop device ether device mii device smscphy #device cpsw device bpf device emac # USB ethernet support, requires miibus device miibus # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=cubieboard2.dts options SMP # Enable multiple cores Index: head/sys/arm/conf/DIGI-CCWMX53 =================================================================== --- head/sys/arm/conf/DIGI-CCWMX53 (revision 270911) +++ head/sys/arm/conf/DIGI-CCWMX53 (revision 270912) @@ -1,189 +1,189 @@ # Kernel configuration for Digi ConnectCore Wi-i.MX53 boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident DIGI-CCWMX53 include "../freescale/imx/std.imx53" makeoptions WITHOUT_MODULES="ahc" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options DEBUG options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols #options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options INCLUDE_CONFIG_FILE # Include this file in kernel options VFP # vfp/neon # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 #options ROOTDEVNAME=\"ufs:ada0s2a\" # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # Debugging support. Always need this: options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: options DDB # Support DDB. #options GDB # Support remote GDB. options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # Ethernet device ffec # Freescale Fast Ethernet Controller device miibus # Standard mii bus # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER device ata device atapci # Only for helper functions device imxata options ATA_STATIC_ID # Static device numbering device iomux # IO Multiplexor device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ukbd # Allow keyboard like HIDs to control console device ums # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # MMC #device sdhci # SD controller #device mmc # SD/MMC protocol #device mmcsd # SDCard disk device # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=digi-ccwmx53.dts # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support #device sc #device vt #device kbdmux #options SC_DFLT_FONT # compile font in #makeoptions SC_DFLT_FONT=cp437 Index: head/sys/arm/conf/EB9200 =================================================================== --- head/sys/arm/conf/EB9200 (revision 270911) +++ head/sys/arm/conf/EB9200 (revision 270912) @@ -1,114 +1,114 @@ # EB9200 - Custom kernel for the Embest ATEB9200 AT91RM9200 evaluation board. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident EB9200 include "../at91/std.eb9200" # The AT91 platform doesn't use /boot/loader, so we have to statically wire # hints. hints "EB9200.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk #options ROOTDEVNAME=\"ufs:/dev/da0s1a\" options NFSCL # New Network Filesystem Client options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP_NFSROOT options BOOTP options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions #options NO_SYSCTL_DESCR # Disable the inlining of mutex, rwlock and sx locks. These eat up a lot # of space. options MUTEX_NOINLINE options RWLOCK_NOINLINE options SX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device random device loop device ether device uart device ate device miibus #device lxtphy device at91_cfata device ata # Debugging for use in -current #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed device md device at91_twi # TWI: Two Wire Interface device at91_spi # SPI: device spibus # MMC/SD device at91_mci device mmc device mmcsd # iic device iic device iicbus device icee device bpf # USB support options USB_DEBUG # enable debug msgs device ohci # OHCI localbus->USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # USB device (gadget) support #device at91_dci # Atmel's usb device #device usfs # emulate a flash #device cdce # emulate an ethernet #device usb_template # Control of the gadget Index: head/sys/arm/conf/EFIKA_MX =================================================================== --- head/sys/arm/conf/EFIKA_MX (revision 270911) +++ head/sys/arm/conf/EFIKA_MX (revision 270912) @@ -1,179 +1,179 @@ # Kernel configuration for Efika MX Smarttop/Smartbook boards # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident EFIKA_MX include "../freescale/imx/std.imx51" makeoptions WITHOUT_MODULES="ahc" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options DEBUG options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking #options INET6 # IPv6 communications protocols #options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options INCLUDE_CONFIG_FILE # Include this file in kernel options VFP # vfp/neon # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 # options ROOTDEVNAME=\"ufs:ada0s2a\" # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # Debugging support. Always need this: options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: options DDB # Support DDB. #options GDB # Support remote GDB. options DEADLKRES # Enable the deadlock resolver options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER device ata device atapci # Only for helper functions device imxata options ATA_STATIC_ID # Static device numbering device iomux # IO Multiplexor device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB Ethernet, requires miibus device miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=efikamx.dts # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support device sc device kbdmux options SC_DFLT_FONT # compile font in makeoptions SC_DFLT_FONT=cp437 device ukbd # Allow keyboard like HIDs to control console device ums Index: head/sys/arm/conf/EXYNOS5.common =================================================================== --- head/sys/arm/conf/EXYNOS5.common (revision 270911) +++ head/sys/arm/conf/EXYNOS5.common (revision 270912) @@ -1,136 +1,136 @@ # Kernel configuration for Samsung Exynos 5 SoC. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options HZ=100 options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID partition tables options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem options SOFTUPDATES options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV options PREEMPTION options FREEBSD_BOOT_LOADER options VFP # vfp/neon options SMP # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS support options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCLIENT # Uncomment this for NFS root #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci options ROOTDEVNAME=\"ufs:/dev/da0\" # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device ehci #device ohci device xhci device umass -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs # Serial ports device uart # I2C (TWSI) device iic device iicbus # SPI device spibus device exynos_spi # Ethernet device ether device mii device smsc device smscphy # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter Index: head/sys/arm/conf/HL200 =================================================================== --- head/sys/arm/conf/HL200 (revision 270911) +++ head/sys/arm/conf/HL200 (revision 270912) @@ -1,144 +1,144 @@ # Kernel configuration for the AT91RM9200 based Hot-e configuration file # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident HL200 include "../at91/std.hl200" #To statically compile in device wiring instead of /boot/device.hints hints "KB920X.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk #options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server #options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options BOOTP_NFSROOT options BOOTP options BOOTP_NFSV3 options BOOTP_WIRED_TO=ate0 options BOOTP_COMPAT options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions #options NO_SYSCTL_DESCR options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device random device loop device ether device uart device ate device mii device lxtphy # Debugging for use in -current #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed device md device at91_twi # TWI: Two Wire Interface device at91_spi # SPI: device spibus # MMC/SD device at91_mci device mmc device mmcsd # iic device iic device iicbus device icee device bpf # USB support options USB_DEBUG # enable debug msgs device ohci # OHCI localbus->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device uhid # "Human Interface Devices" device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device urio # Diamond Rio 500 MP3 player # USB Serial devices device uark # Technologies ARK3116 based serial adapters device ubsa # Belkin F5U103 and compatible serial adapters #device ubser # not yet converted. device uftdi # For FTDI usb serial adapters device uipaq # Some WinCE based devices device uplcom # Prolific PL-2303 serial adapters device uslcom # SI Labs CP2101/CP2102 serial adapters device uvisor # Visor and Palm devices device uvscom # USB serial support for DDI pocket's PHS # USB Ethernet, requires miibus device miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless device rum # Ralink Technology RT2501USB wireless NICs device uath # Atheros AR5523 wireless NICs device ural # Ralink Technology RT2500USB wireless NICs device zyd # ZyDAS zd1211/zd1211b wireless NICs # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm Index: head/sys/arm/conf/HL201 =================================================================== --- head/sys/arm/conf/HL201 (revision 270911) +++ head/sys/arm/conf/HL201 (revision 270912) @@ -1,147 +1,147 @@ # Kernel configuration for the AT91SAM9G20 based Hot-e configuration file # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident HL201 include "../at91/std.hl201" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NANDFS # NAND file system options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server #options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 #options BOOTP_COMPAT options ALT_BREAK_TO_DEBUGGER options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device random device loop device ether device uart device ate device at91_wdt device mii device lxtphy # I2C device at91_twi # Atmel AT91 Two-wire Interface device iic # I2C generic I/O device driver device iicbus # I2C bus system # Debugging for use in -current #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device md device bpf # USB support device ohci # OHCI localbus->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device uhid # "Human Interface Devices" #device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da # USB Ethernet, requires miibus device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm options ROOTDEVNAME=\"ufs:da0s1a\" # NAND Flash - my board as 128MB Samsung part, YMMV. device nand # NAND interface on CS3 # SPI: Data Flash device at91_spi # SPI: device spibus device at45d # at45db642 and maybe others # Coming soon, but not yet options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=hl201.dts options EARLY_PRINTF options SOCDEV_PA=0xfc000000 options SOCDEV_VA=0xdc000000 Index: head/sys/arm/conf/IMX53-QSB =================================================================== --- head/sys/arm/conf/IMX53-QSB (revision 270911) +++ head/sys/arm/conf/IMX53-QSB (revision 270912) @@ -1,182 +1,182 @@ # Kernel configuration for Freescale i.MX53 Quick Start Board # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX53-QSB include "../freescale/imx/std.imx53" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols #options DEBUG options HZ=250 # 4ms scheduling quantum options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols #options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options INCLUDE_CONFIG_FILE # Include this file in kernel options VFP # vfp/neon # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 #options ROOTDEVNAME=\"ufs:ada0s2a\" # kernel/memory size reduction #options MUTEX_NOINLINE #options NO_FFS_SNAPSHOT #options NO_SWAPPING #options NO_SYSCTL_DESCR #options RWLOCK_NOINLINE # Debugging support. Always need this: options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: options DDB # Support DDB. #options GDB # Support remote GDB. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # Ethernet device ffec # Freescale Fast Ethernet Controller device miibus # Standard mii bus # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER #device ata #device atapci # Only for helper functions #device imxata #options ATA_STATIC_ID # Static device numbering device iomux # IO Multiplexor device gpio device gpioled device fsliic device iic device iicbus # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # USB support options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da #device uhid # "Human Interface Devices" #device ukbd # Allow keyboard like HIDs to control console #device ums # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Watchdog timer. # WARNING: can't be disabled!!! device imxwdt # Watchdog # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=imx53-qsb.dts # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support #device sc #device kbdmux #options SC_DFLT_FONT # compile font in #makeoptions SC_DFLT_FONT=cp437 Index: head/sys/arm/conf/IMX6 =================================================================== --- head/sys/arm/conf/IMX6 (revision 270911) +++ head/sys/arm/conf/IMX6 (revision 270912) @@ -1,161 +1,161 @@ # Kernel configuration for Freescale i.MX6 systems. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident IMX6 include "../freescale/imx/std.imx6" options HZ=500 # Scheduling quantum is 2 milliseconds. options SCHED_ULE # ULE scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options INCLUDE_CONFIG_FILE # Include this file in kernel # Debugging support. Always need this: options KDB # Enable kernel debugger support. # For minimum debugger support use KDB_TRACE, for interactive use DDB. #options KDB_TRACE # Print a stack trace for a panic. options DDB # Support DDB. # For full debugger support use this instead: #options GDB # Support remote GDB. # Other debugging options... makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options ALT_BREAK_TO_DEBUGGER # Use to enter debugger. #options DEBUG #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles # Pseudo devices. device loop # Network loopback device random # Entropy device device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module device ether # Ethernet support device miibus # Required for ethernet device bpf # Berkeley packet filter (required for DHCP) #device iomux # IO Multiplexor # General-purpose input/output device gpio # Serial (COM) ports device uart # Multi-uart driver # SDCard device sdhci # SD controller device mmc # SD/MMC protocol device mmcsd # SDCard disk device # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # USB support #options USB_DEBUG # enable debug msgs device ehci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" device u3g # USB modems #device ukbd # Allow keyboard like HIDs to control console #device ums # USB mouse # USB Ethernet, requires miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm # NOTE: serial console will be disabled if syscons enabled # Uncomment following lines for framebuffer/syscons support # Wandboard has no video console support yet. #device sc #device kbdmux #options SC_DFLT_FONT # compile font in #makeoptions SC_DFLT_FONT=cp437 # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 # U-Boot stuff lives on slice 1, FreeBSD on slice 2. options ROOTDEVNAME=\"ufs:mmcsd0s2a\" # ARM and SoC-specific options options FDT # Configure using FDT/DTB data. options SMP # Enable multiple cores options VFP # Enable floating point hardware support options FREEBSD_BOOT_LOADER # Process metadata passed from loader(8) # SoC-specific devices device ffec # Freescale Fast Ethernet Controller device fsliic # Freescale i2c/iic device iic # iic protocol device iicbus # iic bus #device imxwdt # Watchdog. WARNING: can't be disabled!!! Index: head/sys/arm/conf/KB920X =================================================================== --- head/sys/arm/conf/KB920X (revision 270911) +++ head/sys/arm/conf/KB920X (revision 270912) @@ -1,154 +1,154 @@ # KB920X -- Custom kernel configuration for the KB9202 (no letter, A and B) # AT91RM9200 evaluation boards from kwikbyte.com. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident KB920X include "../at91/std.kb920x" # The AT91 platform doesn't use /boot/loader, so we have to statically wire # hints. hints "KB920X.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server #options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions #options NO_SYSCTL_DESCR # Disable the inlining of mutex, rwlock and sx locks. These eat up a lot # of space. options MUTEX_NOINLINE options RWLOCK_NOINLINE options SX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device random device loop device ether device uart device ate device mii device lxtphy # Debugging for use in -current #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed device md device at91_twi # TWI: Two Wire Interface device at91_spi # SPI: device spibus # MMC/SD device at91_mci device mmc device mmcsd # iic device iic device iicbus device icee device bpf # USB support options USB_DEBUG # enable debug msgs device ohci # OHCI localbus->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device uhid # "Human Interface Devices" device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device urio # Diamond Rio 500 MP3 player # USB Serial devices device uark # Technologies ARK3116 based serial adapters device ubsa # Belkin F5U103 and compatible serial adapters device uftdi # For FTDI usb serial adapters device uipaq # Some WinCE based devices device uplcom # Prolific PL-2303 serial adapters device uslcom # SI Labs CP2101/CP2102 serial adapters device uvisor # Visor and Palm devices device uvscom # USB serial support for DDI pocket's PHS # USB Ethernet, requires miibus device miibus device aue # ADMtek USB Ethernet device axe # ASIX Electronics USB Ethernet device cdce # Generic USB over Ethernet device cue # CATC USB Ethernet device kue # Kawasaki LSI USB Ethernet device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless device rum # Ralink Technology RT2501USB wireless NICs device uath # Atheros AR5523 wireless NICs device ural # Ralink Technology RT2500USB wireless NICs device zyd # ZyDAS zd1211/zd1211b wireless NICs # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm # USB device (gadget) support device at91_dci # Atmel's usb device device usfs # emulate a flash device cdce # emulate an ethernet device usb_template # Control of the gadget options IEEE80211_SUPPORT_MESH options AH_SUPPORT_AR5416 Index: head/sys/arm/conf/NSLU =================================================================== --- head/sys/arm/conf/NSLU (revision 270911) +++ head/sys/arm/conf/NSLU (revision 270912) @@ -1,119 +1,119 @@ # NSLU - kernel configuration file for FreeBSD/arm on Linksys NSLU2 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident NSLU # XXX What is defined in std.avila does not exactly match the following: #options PHYSADDR=0x10000000 #options KERNPHYSADDR=0x10200000 #options KERNVIRTADDR=0xc0200000 # Used in ldscript.arm #options FLASHADDR=0x50000000 #options LOADERRAMADDR=0x00000000 include "../xscale/ixp425/std.ixp425" # NB: memory mapping is defined in std.avila (see also comment above) include "../xscale/ixp425/std.avila" options XSCALE_CACHE_READ_WRITE_ALLOCATE #To statically compile in device wiring instead of /boot/device.hints hints "NSLU.hints" # Default places to look for devices. makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions CONF_CFLAGS=-mcpu=xscale options HZ=100 options DEVICE_POLLING # Debugging for use in -current options KDB #options GDB options DDB # Enable the kernel debugger #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC options SCHED_ULE # ULE scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options NFSCL # New Network Filesystem Client options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options MUTEX_NOINLINE # Mutex inlines are space hogs options RWLOCK_NOINLINE # rwlock inlines are space hogs options SX_NOINLINE # sx inliens are space hogs options BOOTP options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=npe0 options BOOTP_COMPAT device pci device uart # I2C Bus device iicbus device iicbb device iic device ixpiic # I2C bus glue device ixpwdog # watchdog timer device npe # Network Processing Engine device npe_fw device firmware device qmgr # Q Manager (required by npe) device mii # Minimal mii routines device rlphy # NSLU2 uses Realtek PHY attached to npe device ether device bpf device loop device md device random # Entropy device device usb options USB_DEBUG device ohci device ehci device umass -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) Index: head/sys/arm/conf/PANDABOARD =================================================================== --- head/sys/arm/conf/PANDABOARD (revision 270911) +++ head/sys/arm/conf/PANDABOARD (revision 270912) @@ -1,151 +1,151 @@ # PANDABOARD -- Custom configuration for the PandaBoard ARM development # platform, check out www.pandaboard.org # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident PANDABOARD # This probably wants to move somewhere else. Maybe we can create a basic # OMAP4340 config, then make a PANDABOARD config that includes the basic one, # adds the start addresses and custom devices plus pulls in this hints file. hints "PANDABOARD.hints" include "../ti/omap4/pandaboard/std.pandaboard" #To statically compile in device wiring instead of /boot/device.hints makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options HZ=100 options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PREEMPTION options PLATFORM options FREEBSD_BOOT_LOADER options VFP # vfp/neon options SMP # Enable multiple cores # Debugging for use in -current makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS support options NFSCL # NFS root options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ue0 # MMC/SD/SDIO Card slot support device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # mmc/sd host controller # I2C support device iicbus device iic device ti_i2c # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device device pl310 # PL310 L2 cache controller # GPIO device gpio # The following enables MFS as root, this seems similar to an initramfs or initrd # as used in Linux. #options MD_ROOT #options MD_ROOT_SIZE=7560 # USB support device usb options USB_HOST_ALIGN=64 # Align usb buffers to cache line size. options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device ohci device ehci device umass -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) # Ethernet device loop device ether device mii device smc device smcphy device bpf # USB Ethernet support, requires miibus device miibus #device axe # ASIX Electronics USB Ethernet device smsc # SMSC LAN95xx USB Ethernet # OMAP-specific devices device ti_sdma device twl device twl_vreg device twl_clks # Flattened Device Tree options FDT options FDT_DTB_STATIC makeoptions FDT_DTS_FILE=pandaboard.dts Index: head/sys/arm/conf/QILA9G20 =================================================================== --- head/sys/arm/conf/QILA9G20 (revision 270911) +++ head/sys/arm/conf/QILA9G20 (revision 270912) @@ -1,155 +1,155 @@ # Kernel configuration for Calao Syatems QIL-A9G20 development card # http://www.calao-systems.com # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident QILA9G20 include "../at91/std.qila9g20" #To statically compile in device wiring instead of /boot/device.hints hints "QILA9G20.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server #options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 #options BOOTP_COMPAT options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options ALT_BREAK_TO_DEBUGGER options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging for use in -current #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device random device loop device bpf device ether device md device uart # Serial Ports # Ethernet device ate # Ethernet Driver device mii option AT91_ATE_USE_RMII device at91_twi # TWI: Two Wire Interface (EEPROM) device at91_wdt # WDT: Watchdog timer # NOTE: SPI DataFlash and mci/mmc/mmcsd have hardware # confilict on this card. Use one or the other. # see board_sam9g20ek.c # SPI: Data Flash #device at91_spi # SPI: #device spibus #device at45d # at45db642 and maybe others # MMC/SD device at91_mci device mmc device mmcsd option AT91_MCI_HAS_4WIRE # iic device iic device iicbus device icee # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # USB support device ohci # OHCI localbus->USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ulpt # Printer #device udbp # USB Double Bulk Pipe devices # USB Ethernet, requires miibus device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm Index: head/sys/arm/conf/RK3188 =================================================================== --- head/sys/arm/conf/RK3188 (revision 270911) +++ head/sys/arm/conf/RK3188 (revision 270912) @@ -1,128 +1,128 @@ # Kernel configuration for Rockchip RK3188 systems. # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident RK3188 include "../rockchip/std.rk30xx" options HZ=100 options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options PREEMPTION options FREEBSD_BOOT_LOADER options VFP # vfp/neon options SMP # Enable multiple cores # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed options DIAGNOSTIC # NFS support #options NFSCL #options NFSSERVER # Network Filesystem Server #options NFSCLIENT # Network Filesystem Client # MMC/SD/SDIO card slot support #device mmc # mmc/sd bus #device mmcsd # mmc/sd flash cards # Boot device is 2nd slice on USB options ROOTDEVNAME=\"ufs:/dev/da0s2\" # Console and misc device uart device uart_ns8250 device pty device snp device md device random # Entropy device # I2C support #device iicbus #device iic # GPIO device gpio -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device dwcotg # DWC OTG controller device umass # Ethernet device loop device ether device mii device bpf # Wireless NIC cards options IEEE80211_DEBUG options IEEE80211_AMPDU_AGE options IEEE80211_SUPPORT_MESH options IEEE80211_SUPPORT_TDMA device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device urtwn device urtwnfw device firmware # Used by the above # USB ethernet support, requires miibus device miibus device udav options FDT # Configure using FDT/DTB data. Index: head/sys/arm/conf/SAM9G20EK =================================================================== --- head/sys/arm/conf/SAM9G20EK (revision 270911) +++ head/sys/arm/conf/SAM9G20EK (revision 270912) @@ -1,156 +1,156 @@ # Kernel configuration for Atmel AT91SAM9G20EK Rev B. development card # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident SAM9G20EK include "../at91/std.sam9g20ek" #To statically compile in device wiring instead of /boot/device.hints hints "SAM9G20EK.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NANDFS # NAND file system options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server #options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 #options BOOTP_COMPAT options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options ALT_BREAK_TO_DEBUGGER #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging for use in -current #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device random device loop device bpf device ether device md device uart # Serial Ports # Ethernet device ate # Ethernet Driver device mii option AT91_ATE_USE_RMII device at91_twi # TWI: Two Wire Interface (EEPROM) device at91_wdt # WDT: Watchdog timer # NAND Flash - Reference design has Samsung 256MB but others possible device nand # NAND interface on CS3 # NOTE: SPI DataFlash and mci/mmc/mmcsd have hardware # confilict on this card. Use one or the other. # see board_sam9g20ek.c # SPI: Data Flash #device at91_spi # SPI: #device spibus #device at45d # at45db642 and maybe others # MMC/SD device at91_mci device mmc device mmcsd option AT91_MCI_SLOT_B option AT91_MCI_HAS_4WIRE # iic device iic device iicbus device icee # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # USB support device ohci # OHCI localbus->USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ulpt # Printer #device udbp # USB Double Bulk Pipe devices # USB Ethernet, requires miibus #device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm Index: head/sys/arm/conf/SAM9X25EK =================================================================== --- head/sys/arm/conf/SAM9X25EK (revision 270911) +++ head/sys/arm/conf/SAM9X25EK (revision 270912) @@ -1,156 +1,156 @@ # Kernel configuration for Atmel AT91SAM9G20EK Rev B. development card # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident SAM9X25EK include "../at91/std.sam9x25ek" #To statically compile in device wiring instead of /boot/device.hints hints "SAM9G20EK.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server #options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 #options BOOTP_COMPAT options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options ALT_BREAK_TO_DEBUGGER #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework #options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging for use in -current #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device random device pty device loop device bpf device ether device md device uart # Serial Ports # Ethernet device ate # Ethernet Driver device mii option AT91_ATE_USE_RMII #device at91_twi # TWI: Two Wire Interface (EEPROM) device at91_wdt # WDT: Watchdog timer # NOTE: SPI DataFlash and mci/mmc/mmcsd have hardware # confilict on this card. Use one or the other. # see board_sam9g20ek.c # SPI: Data Flash #device at91_spi # SPI: #device spibus #device at45d # at45db642 and maybe others # MMC/SD device at91_mci device mmc device mmcsd #option AT91_MCI_SLOT_B option AT91_MCI_HAS_4WIRE # iic device iic device iicbus device icee # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # USB support #device ohci # OHCI localbus->USB interface #device usb # USB Bus (required) #device umass # Disks/Mass storage - Requires scbus and da #device uhid # "Human Interface Devices" #device ulpt # Printer #device udbp # USB Double Bulk Pipe devices # USB Ethernet, requires miibus device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet #device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm Index: head/sys/arm/conf/SN9G45 =================================================================== --- head/sys/arm/conf/SN9G45 (revision 270911) +++ head/sys/arm/conf/SN9G45 (revision 270912) @@ -1,133 +1,133 @@ # Kernel configuration for DesignA Electronics Snapper9G45 System on Module # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ #NO_UNIVERSE ident SN9G45 include "../at91/std.sn9g45" #To statically compile in device wiring instead of /boot/device.hints #hints "SN9G45.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking #options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem #options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists #options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options MD_ROOT_SIZE=4096 # 4MB ram disk options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server #options NFSLOCKD # Network Lock Manager #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 #options BOOTP_COMPAT options ROOTDEVNAME=\"ufs:/dev/da0s1\" options ALT_BREAK_TO_DEBUGGER options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=1000 # Delay (in ms) before probing SCSI #options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING # Debugging for use in -current #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC device random device loop device bpf device ether device md device uart # Serial Ports # Ethernet device ate # Ethernet Driver device mii option AT91_ATE_USE_RMII device at91_wdt # WDT: Watchdog timer # SCSI peripherals -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device cd # CD -device pass # Passthrough device (direct SCSI access) +device pass # Passthrough device (direct ATA/SCSI access) # USB support device ohci # OHCI localbus->USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device uhid # "Human Interface Devices" #device ulpt # Printer #device udbp # USB Double Bulk Pipe devices # USB Ethernet, requires miibus device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm Index: head/sys/arm/conf/VYBRID =================================================================== --- head/sys/arm/conf/VYBRID (revision 270911) +++ head/sys/arm/conf/VYBRID (revision 270912) @@ -1,153 +1,153 @@ # Kernel configuration for Vybrid Family boards. # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident VYBRID include "../freescale/vybrid/std.vybrid" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols makeoptions WERROR="-Werror" options HZ=100 options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework #options NANDFS # NAND Filesystem options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV options PREEMPTION options FREEBSD_BOOT_LOADER options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING options VFP # vfp/neon # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options BREAK_TO_DEBUGGER #options VERBOSE_SYSINIT # Enable verbose sysinit messages options KDB options DDB # Enable the kernel debugger #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options DIAGNOSTIC # NFS support options NFSCL # Network Filesystem Client options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCLIENT # Uncomment this for NFS root #options NFS_ROOT # NFS usable as /, requires NFSCL #options BOOTP_NFSROOT #options BOOTP_COMPAT #options BOOTP #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ffec0 device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci #options ROOTDEVNAME=\"nfs:10.5.0.1:/tftpboot/cosmic\" #options ROOTDEVNAME=\"nandfs:/dev/gnand0s.root\" options ROOTDEVNAME=\"ufs:/dev/da0\" #options SMP # Pseudo devices device loop device random device pty device md device gpio # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE #device musb device ehci #device ohci device umass -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device pass # SATA #device ata #device atadisk #device mvs device nand # Serial ports device uart # I2C (TWSI) device iic device iicbus # Ethernet device ether device ffec # USB ethernet support, requires miibus device miibus device axe # ASIX Electronics USB Ethernet device bpf # Berkeley packet filter device sound # SPI device spibus device vf_spi # Framebuffer device vt device kbdmux device ukbd options FDT Index: head/sys/arm/conf/ZEDBOARD =================================================================== --- head/sys/arm/conf/ZEDBOARD (revision 270911) +++ head/sys/arm/conf/ZEDBOARD (revision 270912) @@ -1,103 +1,103 @@ # ZEDBOARD -- Custom configuration for the Xilinx Zynq-7000 based # ZedBoard (www.zedboard.org) # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident ZEDBOARD include "../xilinx/zedboard/std.zedboard" makeoptions MODULES_OVERRIDE="" makeoptions WITHOUT_MODULES="ahc" options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories # options ROOTDEVNAME=\"ufs:mmcsd0s2a\" options NFSCL # Network Filesystem Client # options NFSSD # Network Filesystem Server # options NFSLOCKD # Network Lock Manager # options NFS_ROOT # NFS usable as /, requires NFSCL # options BOOTP_NFSROOT # options BOOTP options GEOM_PART_BSD # BSD partition scheme options GEOM_PART_MBR # MBR partition scheme options TMPFS # Efficient memory filesystem options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions options FREEBSD_BOOT_LOADER options VFP # vfp/neon options SMP # Symmetric MultiProcessor Kernel # Debugging makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options DDB options KDB # options BREAK_TO_DEBUGGER # options INVARIANTS # Enable calls of extra sanity checking # options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS # options WITNESS # Enable checks to detect deadlocks and cycles # options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed device loop device random device ether device if_cgem # Zynq-7000 gig ethernet device device mii device pty device uart device gpio device md device mmc # mmc/sd bus device mmcsd # mmc/sd flash cards device sdhci # generic sdhci device bpf # Berkeley packet filter # USB support device usb options USB_DEBUG #options USB_REQ_DEBUG #options USB_VERBOSE device ehci device umass -device scbus # SCSI bus (required for SCSI) +device scbus # SCSI bus (required for ATA/SCSI) device da # Direct Access (disks) device axe # USB-Ethernet # Flattened Device Tree options FDT # options FDT_DTB_STATIC # makeoptions FDT_DTS_FILE=zedboard.dts