Index: head/sys/arm/conf/ATMEL =================================================================== --- head/sys/arm/conf/ATMEL (revision 260886) +++ head/sys/arm/conf/ATMEL (revision 260887) @@ -1,177 +1,180 @@ # Kernel configuration to test compile all the atmel bits with one # configuration. This kernel will not (presently) boot. Do not copy # it to create your own custom config file. # # $FreeBSD$ ident ATMEL include "../at91/std.atmel" # Typical values for most SoCs and board configurations. Will not work for # at91sam9g45 or on some boards with non u-boot boot loaders. options STARTUP_PAGETABLE_ADDR=0x20800000 makeoptions KERNPHYSADDR=0x20000000 makeoptions KERNVIRTADDR=0xc0000000 options KERNPHYSADDR=0x20000000 options KERNVIRTADDR=0xc0000000 makeoptions MODULES_OVERRIDE="" # list all boards here, but not just yet (no multiboard in mainline). options ARM_MANY_BOARD device at91_board_bwct device at91_board_ethernut5 device at91_board_hl200 device at91_board_hl201 device at91_board_kb920x device at91_board_qila9g20 device at91_board_sam9260ek device at91_board_sam9g20ek device at91_board_sam9x25ek device at91_board_sn9g45 device at91_board_tsc4370 #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options MD_ROOT # MD is a potential root device options NFSCL # New Network Filesystem Client options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. #options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) #options AUDIT # Security event auditing #options CAPABILITY_MODE # Capsicum capability mode #options CAPABILITIES # Capsicum capabilities #options MAC # TrustedBSD MAC Framework #options INCLUDE_CONFIG_FILE # Include this file in kernel # required for netbooting options BOOTP options BOOTP_COMPAT options BOOTP_NFSROOT options BOOTP_NFSV3 options BOOTP_WIRED_TO=ate0 # alternatively, boot from a MMC/SD memory card #options ROOTDEVNAME=\"ufs:/dev/mmcsd0a\" # kernel/memory size reduction options MUTEX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING options NO_SYSCTL_DESCR options RWLOCK_NOINLINE # Debugging support. Always need this: options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: options DDB # Support DDB. options GDB # Support remote GDB. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Ethernet device mii # Minimal MII support device ate # Atmel AT91 Ethernet friver # I2C device at91_twi # Atmel AT91 Two-wire Interface device iic # I2C generic I/O device driver device iicbus # I2C bus system device pcf8563 # NXP PCF8563 clock/calendar # MMC/SD device at91_mci # Atmel AT91 Multimedia Card Interface options AT91_MCI_HAS_4WIRE device mmc # MMC/SD bus device mmcsd # MMC/SD memory card # DataFlash device at91_spi # Atmel AT91 Serial Peripheral Interface device spibus # SPI bus device at45d # Atmel AT45D device geom_map # GEOM partition mapping # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device vlan # 802.1Q VLAN support device tun # Packet tunnel. device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. options USB_DEBUG # enable debug msgs device ohci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da # USB device (gadget) support device at91_dci # Atmel's usb device device usfs # emulate a flash device cdce # emulate an ethernet device usb_template # Control of the gadget # watchdog device at91_wdt # Atmel AT91 Watchdog Timer device at91_rtc device at91_ssc #device at91_tc # missing? + +# NAND Flash - Reference design has Samsung 256MB but others possible +device nand # NAND interface on CS3 Index: head/sys/arm/conf/HL201 =================================================================== --- head/sys/arm/conf/HL201 (revision 260886) +++ head/sys/arm/conf/HL201 (revision 260887) @@ -1,133 +1,136 @@ # Kernel configuration for the AT91SAM9 based Hot-e configuration file # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident HL201 include "../at91/std.hl201" #To statically compile in device wiring instead of /boot/device.hints hints "HL201.hints" makeoptions MODULES_OVERRIDE="" makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options DDB options KDB options SCHED_4BSD #4BSD scheduler options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem #options SOFTUPDATES #Enable FFS soft updates support #options UFS_ACL #Support for access control lists #options UFS_DIRHASH #Improve performance on big directories #options MD_ROOT #MD is a potential root device -#options MD_ROOT_SIZE=4096 # 3MB ram disk +#options MD_ROOT_SIZE=4096 # 4MB ram disk +options NANDFS # NAND file system #options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" options NFSCL #New Network Filesystem Client #options NFSD #New Network Filesystem Server #options NFSLOCKD #Network Lock Manager options NFS_ROOT #NFS usable as /, requires NFSCL options BOOTP_NFSROOT options BOOTP options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 options BOOTP_COMPAT options ALT_BREAK_TO_DEBUGGER #options MSDOSFS #MSDOS Filesystem #options CD9660 #ISO 9660 Filesystem #options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework #options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI #options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions #options SYSCTL_OMIT_DESCR options MUTEX_NOINLINE options RWLOCK_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING device random device loop device ether device uart device ate device mii #device lxtphy # Debugging for use in -current #options INVARIANTS #Enable calls of extra sanity checking #options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS #Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed #options DIAGNOSTIC device md #device at91_twi # TWI: Two Wire Interface #device at91_spi # SPI: device spibus # MMC/SD #device at91_mci #device mmc #device mmcsd # iic device iic device iicbus device icee device bpf # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. #device ohci # OHCI localbus->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device uhid # "Human Interface Devices" #device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da # USB Ethernet, requires miibus device miibus #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cdce # Generic USB over Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet device udav # Davicom DM9601E USB # USB Wireless #device rum # Ralink Technology RT2501USB wireless NICs #device uath # Atheros AR5523 wireless NICs #device ural # Ralink Technology RT2500USB wireless NICs #device zyd # ZyDAS zd1211/zd1211b wireless NICs # SCSI peripherals device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct SCSI access) # Wireless NIC cards #device wlan # 802.11 support #device wlan_wep # 802.11 WEP support #device wlan_ccmp # 802.11 CCMP support #device wlan_tkip # 802.11 TKIP support #device wlan_amrr # AMRR transmit rate control algorithm options ROOTDEVNAME=\"ufs:da0s1a\" +# NAND Flash - my board as 128MB Samsung part +device nand # NAND interface on CS3 Index: head/sys/arm/conf/SAM9260EK =================================================================== --- head/sys/arm/conf/SAM9260EK (revision 260886) +++ head/sys/arm/conf/SAM9260EK (revision 260887) @@ -1,167 +1,171 @@ -# Kernel configuration for Ethernut 5 boards +# Kernel configuration for Atmel SAM9260-EK eval board # # For more information on this file, please read the config(5) manual page, # and/or the handbook section on Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD$ ident SAM9260EK include "../at91/std.sam9260ek" # To statically compile in device wiring instead of /boot/device.hints hints "SAM9260EK.hints" #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_4BSD # 4BSD scheduler #options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking #options INET6 # IPv6 communications protocols #options SCTP # Stream Control Transmission Protocol options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support #options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories #options UFS_GJOURNAL # Enable gjournal-based UFS journaling #options MD_ROOT # MD is a potential root device +options NANDFS # NAND file system options NFSCL # New Network Filesystem Client #options NFSD # New Network Filesystem Server options NFSLOCKD # Network Lock Manager options NFS_ROOT # NFS usable as /, requires NFSCL #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework #options GEOM_PART_GPT # GUID Partition Tables. #options GEOM_LABEL # Provides labelization #options COMPAT_FREEBSD5 # Compatible with FreeBSD5 #options COMPAT_FREEBSD6 # Compatible with FreeBSD6 #options COMPAT_FREEBSD7 # Compatible with FreeBSD7 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support #options STACK # stack(9) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. #options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) #options AUDIT # Security event auditing #options CAPABILITY_MODE # Capsicum capability mode #options CAPABILITIES # Capsicum capabilities #options MAC # TrustedBSD MAC Framework #options INCLUDE_CONFIG_FILE # Include this file in kernel # required for netbooting #options BOOTP #options BOOTP_COMPAT #options BOOTP_NFSROOT #options BOOTP_NFSV3 #options BOOTP_WIRED_TO=ate0 # alternatively, boot from a MMC/SD memory card #options ROOTDEVNAME=\"ufs:/dev/mmcsd0s1a\" # Alternatively, boot from a USB card. options ROOTDEVNAME=\"ufs:/dev/da0s1a\" # kernel/memory size reduction options MUTEX_NOINLINE options NO_FFS_SNAPSHOT options NO_SWAPPING options NO_SYSCTL_DESCR options RWLOCK_NOINLINE # Debugging support. Always need this: #options KDB # Enable kernel debugger support. # For minimum debugger support (stable branch) use: #options KDB_TRACE # Print a stack trace for a panic. # For full debugger support use this instead: #options DDB # Support DDB. #options GDB # Support remote GDB. #options DEADLKRES # Enable the deadlock resolver #options INVARIANTS # Enable calls of extra sanity checking #options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS # Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # Ethernet device mii # Minimal MII support device ate # Atmel AT91 Ethernet driver # I2C device at91_twi # Atmel AT91 Two-wire Interface device iic # I2C generic I/O device driver device iicbus # I2C bus system device icee # I2C eeprom # MMC/SD # See comment for DataFlash below device at91_mci # Atmel AT91 Multimedia Card Interface options AT91_MCI_HAS_4WIRE # 4 wires options AT91_MCI_SLOT_B # Wired to slot B device mmc # MMC/SD bus device mmcsd # MMC/SD memory card # DataFlash # The DataFlash and MMC card are wired together, so we must pick one or the # other. This is due to pin mux, and also due to the design of the # SAM9260EK board. SLOT A wouldn't have this issue. #device at91_spi # Atmel AT91 Serial Peripheral Interface #device spibus # SPI bus #device at45d # Atmel AT45D #device geom_map # GEOM partition mapping # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support #device vlan # 802.1Q VLAN support #device tun # Packet tunnel. #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) #device firmware # firmware assist module # SCSI peripherals device scbus # SCSI bus (required for ATA/SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD/DVD device pass # Passthrough device (direct ATA/SCSI access) device ses # Enclosure Services (SES and SAF-TE) #device ctl # CAM Target Layer # Serial (COM) ports device uart # Multi-uart driver options ALT_BREAK_TO_DEBUGGER # USB support options USB_HOST_ALIGN=32 # Align usb buffers to cache line size. #options USB_DEBUG # enable debug msgs device ohci # OHCI USB interface device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da # watchdog device at91_wdt # Atmel AT91 Watchdog Timer + +# NAND Flash - Reference design has Samsung 256MB but others possible +device nand # NAND interface on CS3